diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..67b6221 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -187,8 +187,6 @@
 	exynos5422-odroidxu3.dtb \
 	exynos5422-odroidxu3-lite.dtb \
 	exynos5422-odroidxu4.dtb \
-	exynos5440-sd5v1.dtb \
-	exynos5440-ssdk5440.dtb \
 	exynos5800-peach-pi.dtb
 dtb-$(CONFIG_ARCH_GEMINI) += \
 	gemini-dlink-dir-685.dtb \
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
deleted file mode 100644
index ad6f533b..0000000
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * SAMSUNG SD5v1 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-
-/ {
-	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
-	compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	/* FIXME: set reg property with correct start address and size */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-
-	spi {
-		status = "disabled";
-	};
-
-};
-
-&gmac {
-	fixed_phy;
-	phy_addr = <1>;
-};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
deleted file mode 100644
index 7eafad3..0000000
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * SAMSUNG SSDK5440 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
-	compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	/* FIXME: set reg property with correct start address and size */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-};
-
-&pcie_0 {
-	reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&pcie_1 {
-	reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&spi_0 {
-	flash: w25q128@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "winbond,w25q128";
-		spi-max-frequency = <15625000>;
-		reg = <0>;
-		controller-data {
-			samsung,spi-feedback-delay = <0>;
-		};
-
-		partition@0 {
-			label = "BootLoader";
-			reg = <0x60000 0x80000>;
-			read-only;
-		};
-
-		partition@e0000 {
-			label = "Recovery-Kernel";
-			reg = <0xe0000 0x300000>;
-			read-only;
-		};
-
-		partition@3e0000 {
-			label = "CRAM-FS";
-			reg = <0x3e0000 0x700000>;
-			read-only;
-		};
-
-		partition@ae0000 {
-			label = "User-Data";
-			reg = <0xae0000 0x520000>;
-		};
-
-	};
-
-};
diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
deleted file mode 100644
index 7b2fba0..0000000
--- a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Device tree sources for Exynos5440 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <5>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <0x5d2d>;
-samsung,tmu_min_efuse_value = <16>;
-samsung,tmu_max_efuse_value = <76>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <70>;
-samsung,tmu_default_temp_offset = <25>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
deleted file mode 100644
index 356e963..0000000
--- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Device tree sources for default Exynos5440 thermal zone definition
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-polling-delay-passive = <0>;
-polling-delay = <0>;
-trips {
-	cpu-alert-0 {
-		temperature = <100000>; /* millicelsius */
-		hysteresis = <0>; /* millicelsius */
-		type = "active";
-	};
-	cpu-crit-0 {
-		temperature = <105000>; /* millicelsius */
-		hysteresis = <0>; /* millicelsius */
-		type = "critical";
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
deleted file mode 100644
index 9c3c75a..0000000
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * SAMSUNG EXYNOS5440 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/exynos5440.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,exynos5440", "samsung,exynos5";
-
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		spi0 = &spi_0;
-		tmuctrl0 = &tmuctrl_0;
-		tmuctrl1 = &tmuctrl_1;
-		tmuctrl2 = &tmuctrl_2;
-	};
-
-	clock: clock-controller@160000 {
-		compatible = "samsung,exynos5440-clock";
-		reg = <0x160000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	gic: interrupt-controller@2E0000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x2E1000 0x1000>,
-			<0x2E2000 0x2000>,
-			<0x2E4000 0x2000>,
-			<0x2E6000 0x2000>;
-		interrupts = <GIC_PPI 9
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	timer {
-		compatible = "arm,cortex-a15-timer",
-			     "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <50000000>;
-	};
-
-	cpufreq@160000 {
-		compatible = "samsung,exynos5440-cpufreq";
-		reg = <0x160000 0x1000>;
-		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-		operating-points = <
-				/* KHz	  uV */
-				1500000 1100000
-				1400000 1075000
-				1300000 1050000
-				1200000 1025000
-				1100000 1000000
-				1000000 975000
-				900000  950000
-				800000  925000
-		>;
-	};
-
-	serial_0: serial@B0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xB0000 0x1000>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial_1: serial@C0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xC0000 0x1000>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	spi_0: spi@D0000 {
-		compatible = "samsung,exynos5440-spi";
-		reg = <0xD0000 0x100>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,spi-src-clk = <0>;
-		num-cs = <1>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
-		clock-names = "spi", "spi_busclk0";
-	};
-
-	pin_ctrl: pinctrl@E0000 {
-		compatible = "samsung,exynos5440-pinctrl";
-		reg = <0xE0000 0x1000>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#gpio-cells = <2>;
-
-		fan: fan {
-			samsung,exynos5440-pin-function = <1>;
-		};
-
-		hdd_led0: hdd_led0 {
-			samsung,exynos5440-pin-function = <2>;
-		};
-
-		hdd_led1: hdd_led1 {
-			samsung,exynos5440-pin-function = <3>;
-		};
-
-		uart1: uart1 {
-			samsung,exynos5440-pin-function = <4>;
-		};
-	};
-
-	i2c@F0000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0xF0000 0x1000>;
-		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	i2c@100000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0x100000 0x1000>;
-		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	watchdog@110000 {
-		compatible = "samsung,s3c6410-wdt";
-		reg = <0x110000 0x1000>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "watchdog";
-	};
-
-	gmac: ethernet@230000 {
-		compatible = "snps,dwmac-3.70a", "snps,dwmac";
-		reg = <0x00230000 0x8000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "macirq";
-		phy-mode = "sgmii";
-		clocks = <&clock CLK_GMAC0>;
-		clock-names = "stmmaceth";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-	};
-
-	rtc@130000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x130000 0x1000>;
-		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "rtc";
-	};
-
-	tmuctrl_0: tmuctrl@160118 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-		#include "exynos5440-tmu-sensor-conf.dtsi"
-	};
-
-	tmuctrl_1: tmuctrl@16011C {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x16011C 0x230>, <0x160368 0x10>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-		#include "exynos5440-tmu-sensor-conf.dtsi"
-	};
-
-	tmuctrl_2: tmuctrl@160120 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160120 0x230>, <0x160368 0x10>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-		#include "exynos5440-tmu-sensor-conf.dtsi"
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmuctrl_0>;
-			#include "exynos5440-trip-points.dtsi"
-		};
-		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmuctrl_1>;
-		       #include "exynos5440-trip-points.dtsi"
-		};
-		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmuctrl_2>;
-		       #include "exynos5440-trip-points.dtsi"
-		};
-	};
-
-	sata@210000 {
-		compatible = "snps,exynos5440-ahci";
-		reg = <0x210000 0x10000>;
-		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_SATA>;
-		clock-names = "sata";
-	};
-
-	ohci@220000 {
-		compatible = "samsung,exynos5440-ohci";
-		reg = <0x220000 0x1000>;
-		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	ehci@221000 {
-		compatible = "samsung,exynos5440-ehci";
-		reg = <0x221000 0x1000>;
-		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	pcie_phy0: pcie-phy@270000 {
-		#phy-cells = <0>;
-		compatible = "samsung,exynos5440-pcie-phy";
-		reg = <0x270000 0x1000>, <0x271000 0x40>;
-	};
-
-	pcie_phy1: pcie-phy@272000 {
-		#phy-cells = <0>;
-		compatible = "samsung,exynos5440-pcie-phy";
-		reg = <0x272000 0x1000>, <0x271040 0x40>;
-	};
-
-	pcie_0: pcie@290000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x290000 0x1000>, <0x40000000 0x1000>;
-		reg-names = "elbi", "config";
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		phys = <&pcie_phy0>;
-		ranges = <0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
-		bus-range = <0x00 0xff>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 53>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-
-	pcie_1: pcie@2a0000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x2a0000 0x1000>, <0x60000000 0x1000>;
-		reg-names = "elbi", "config";
-		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		phys = <&pcie_phy1>;
-		ranges = <0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
-		bus-range = <0x00 0xff>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 56>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 44fa753..1374fe7 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -110,18 +110,6 @@
 	default y
 	depends on ARCH_EXYNOS5
 
-config SOC_EXYNOS5440
-	bool "SAMSUNG EXYNOS5440"
-	default y
-	depends on ARCH_EXYNOS5
-	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-	select HAVE_ARM_ARCH_TIMER
-	select AUTO_ZRELADDR
-	select PINCTRL_EXYNOS5440
-	select PM_OPP
-	help
-	  Enable EXYNOS5440 SoC support
-
 config SOC_EXYNOS5800
 	bool "SAMSUNG EXYNOS5800"
 	default y
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 3f71552..7c3a97d 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -24,7 +24,6 @@
 #define EXYNOS5250_SOC_ID	0x43520000
 #define EXYNOS5410_SOC_ID	0xE5410000
 #define EXYNOS5420_SOC_ID	0xE5420000
-#define EXYNOS5440_SOC_ID	0xE5440000
 #define EXYNOS5800_SOC_ID	0xE5422000
 #define EXYNOS5_SOC_MASK	0xFFFFF000
 
@@ -42,7 +41,6 @@ IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 
 #if defined(CONFIG_SOC_EXYNOS3250)
@@ -85,12 +83,6 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos5420()	0
 #endif
 
-#if defined(CONFIG_SOC_EXYNOS5440)
-# define soc_is_exynos5440()	is_samsung_exynos5440()
-#else
-# define soc_is_exynos5440()	0
-#endif
-
 #if defined(CONFIG_SOC_EXYNOS5800)
 # define soc_is_exynos5800()	is_samsung_exynos5800()
 #else
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 9a9caac..c8997a8 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -69,10 +69,6 @@ void __init exynos_sysram_init(void)
 
 static void __init exynos_init_late(void)
 {
-	if (of_machine_is_compatible("samsung,exynos5440"))
-		/* to be supported later */
-		return;
-
 	exynos_pm_init();
 }
 
@@ -83,8 +79,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
 	const __be32 *reg;
 	int len;
 
-	if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
-		!of_flat_dt_is_compatible(node, "samsung,exynos5440-clock"))
+	if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid"))
 		return 0;
 
 	reg = of_get_flat_dt_prop(node, "reg", &len);
@@ -212,7 +207,6 @@ static char const *const exynos_dt_compat[] __initconst = {
 	"samsung,exynos5250",
 	"samsung,exynos5260",
 	"samsung,exynos5420",
-	"samsung,exynos5440",
 	NULL
 };
 
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 99f9a89..564570e 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -75,7 +75,6 @@ static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "generic-ahci", },
 	/* Keep the following compatibles for device tree compatibility */
 	{ .compatible = "snps,spear-ahci", },
-	{ .compatible = "snps,exynos5440-ahci", },
 	{ .compatible = "ibm,476gtr-ahci", },
 	{ .compatible = "snps,dwc-ahci", },
 	{ .compatible = "hisilicon,hisi-ahci", },
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 2383500..cfcb1bd 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -11,7 +11,6 @@
 obj-$(CONFIG_SOC_EXYNOS5410)	+= clk-exynos5410.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos5433.o
-obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-clkout.o
 obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)	+= clk-exynos7.o
diff --git a/drivers/clk/samsung/clk-exynos5440.c b/drivers/clk/samsung/clk-exynos5440.c
deleted file mode 100644
index a80f3ef..0000000
--- a/drivers/clk/samsung/clk-exynos5440.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Thomas Abraham <thomas.ab@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Common Clock Framework support for Exynos5440 SoC.
-*/
-
-#include <dt-bindings/clock/exynos5440.h>
-#include <linux/clk-provider.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-
-#include "clk.h"
-#include "clk-pll.h"
-
-#define CLKEN_OV_VAL		0xf8
-#define CPU_CLK_STATUS		0xfc
-#define MISC_DOUT1		0x558
-
-static void __iomem *reg_base;
-
-/* parent clock name list */
-PNAME(mout_armclk_p)	= { "cplla", "cpllb" };
-PNAME(mout_spi_p)	= { "div125", "div200" };
-
-/* fixed rate clocks generated outside the soc */
-static struct samsung_fixed_rate_clock exynos5440_fixed_rate_ext_clks[] __initdata = {
-	FRATE(0, "xtal", NULL, 0, 0),
-};
-
-/* fixed rate clocks */
-static const struct samsung_fixed_rate_clock exynos5440_fixed_rate_clks[] __initconst = {
-	FRATE(0, "ppll", NULL, 0, 1000000000),
-	FRATE(0, "usb_phy0", NULL, 0, 60000000),
-	FRATE(0, "usb_phy1", NULL, 0, 60000000),
-	FRATE(0, "usb_ohci12", NULL, 0, 12000000),
-	FRATE(0, "usb_ohci48", NULL, 0, 48000000),
-};
-
-/* fixed factor clocks */
-static const struct samsung_fixed_factor_clock exynos5440_fixed_factor_clks[] __initconst = {
-	FFACTOR(0, "div250", "ppll", 1, 4, 0),
-	FFACTOR(0, "div200", "ppll", 1, 5, 0),
-	FFACTOR(0, "div125", "div250", 1, 2, 0),
-};
-
-/* mux clocks */
-static const struct samsung_mux_clock exynos5440_mux_clks[] __initconst = {
-	MUX(0, "mout_spi", mout_spi_p, MISC_DOUT1, 5, 1),
-	MUX_A(CLK_ARM_CLK, "arm_clk", mout_armclk_p,
-			CPU_CLK_STATUS, 0, 1, "armclk"),
-};
-
-/* divider clocks */
-static const struct samsung_div_clock exynos5440_div_clks[] __initconst = {
-	DIV(CLK_SPI_BAUD, "div_spi", "mout_spi", MISC_DOUT1, 3, 2),
-};
-
-/* gate clocks */
-static const struct samsung_gate_clock exynos5440_gate_clks[] __initconst = {
-	GATE(CLK_PB0_250, "pb0_250", "div250", CLKEN_OV_VAL, 3, 0, 0),
-	GATE(CLK_PR0_250, "pr0_250", "div250", CLKEN_OV_VAL, 4, 0, 0),
-	GATE(CLK_PR1_250, "pr1_250", "div250", CLKEN_OV_VAL, 5, 0, 0),
-	GATE(CLK_B_250, "b_250", "div250", CLKEN_OV_VAL, 9, 0, 0),
-	GATE(CLK_B_125, "b_125", "div125", CLKEN_OV_VAL, 10, 0, 0),
-	GATE(CLK_B_200, "b_200", "div200", CLKEN_OV_VAL, 11, 0, 0),
-	GATE(CLK_SATA, "sata", "div200", CLKEN_OV_VAL, 12, 0, 0),
-	GATE(CLK_USB, "usb", "div200", CLKEN_OV_VAL, 13, 0, 0),
-	GATE(CLK_GMAC0, "gmac0", "div200", CLKEN_OV_VAL, 14, 0, 0),
-	GATE(CLK_CS250, "cs250", "div250", CLKEN_OV_VAL, 19, 0, 0),
-	GATE(CLK_PB0_250_O, "pb0_250_o", "pb0_250", CLKEN_OV_VAL, 3, 0, 0),
-	GATE(CLK_PR0_250_O, "pr0_250_o", "pr0_250", CLKEN_OV_VAL, 4, 0, 0),
-	GATE(CLK_PR1_250_O, "pr1_250_o", "pr1_250", CLKEN_OV_VAL, 5, 0, 0),
-	GATE(CLK_B_250_O, "b_250_o", "b_250", CLKEN_OV_VAL, 9, 0, 0),
-	GATE(CLK_B_125_O, "b_125_o", "b_125", CLKEN_OV_VAL, 10, 0, 0),
-	GATE(CLK_B_200_O, "b_200_o", "b_200", CLKEN_OV_VAL, 11, 0, 0),
-	GATE(CLK_SATA_O, "sata_o", "sata", CLKEN_OV_VAL, 12, 0, 0),
-	GATE(CLK_USB_O, "usb_o", "usb", CLKEN_OV_VAL, 13, 0, 0),
-	GATE(CLK_GMAC0_O, "gmac0_o", "gmac", CLKEN_OV_VAL, 14, 0, 0),
-	GATE(CLK_CS250_O, "cs250_o", "cs250", CLKEN_OV_VAL, 19, 0, 0),
-};
-
-static const struct of_device_id ext_clk_match[] __initconst = {
-	{ .compatible = "samsung,clock-xtal", .data = (void *)0, },
-	{},
-};
-
-static int exynos5440_clk_restart_notify(struct notifier_block *this,
-		unsigned long code, void *unused)
-{
-	u32 val, status;
-
-	status = readl_relaxed(reg_base + 0xbc);
-	val = readl_relaxed(reg_base + 0xcc);
-	val = (val & 0xffff0000) | (status & 0xffff);
-	writel_relaxed(val, reg_base + 0xcc);
-
-	return NOTIFY_DONE;
-}
-
-/*
- * Exynos5440 Clock restart notifier, handles restart functionality
- */
-static struct notifier_block exynos5440_clk_restart_handler = {
-	.notifier_call = exynos5440_clk_restart_notify,
-	.priority = 128,
-};
-
-static const struct samsung_pll_clock exynos5440_plls[] __initconst = {
-	PLL(pll_2550x, CLK_CPLLA, "cplla", "xtal", 0, 0x4c, NULL),
-	PLL(pll_2550x, CLK_CPLLB, "cpllb", "xtal", 0, 0x50, NULL),
-};
-
-/* register exynos5440 clocks */
-static void __init exynos5440_clk_init(struct device_node *np)
-{
-	struct samsung_clk_provider *ctx;
-
-	reg_base = of_iomap(np, 0);
-	if (!reg_base) {
-		pr_err("%s: failed to map clock controller registers,"
-			" aborting clock initialization\n", __func__);
-		return;
-	}
-
-	ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
-
-	samsung_clk_of_register_fixed_ext(ctx, exynos5440_fixed_rate_ext_clks,
-		ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
-
-	samsung_clk_register_pll(ctx, exynos5440_plls,
-			ARRAY_SIZE(exynos5440_plls), ctx->reg_base);
-
-	samsung_clk_register_fixed_rate(ctx, exynos5440_fixed_rate_clks,
-			ARRAY_SIZE(exynos5440_fixed_rate_clks));
-	samsung_clk_register_fixed_factor(ctx, exynos5440_fixed_factor_clks,
-			ARRAY_SIZE(exynos5440_fixed_factor_clks));
-	samsung_clk_register_mux(ctx, exynos5440_mux_clks,
-			ARRAY_SIZE(exynos5440_mux_clks));
-	samsung_clk_register_div(ctx, exynos5440_div_clks,
-			ARRAY_SIZE(exynos5440_div_clks));
-	samsung_clk_register_gate(ctx, exynos5440_gate_clks,
-			ARRAY_SIZE(exynos5440_gate_clks));
-
-	samsung_clk_of_add_provider(np, ctx);
-
-	if (register_restart_handler(&exynos5440_clk_restart_handler))
-		pr_warn("exynos5440 clock can't register restart handler\n");
-
-	pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("arm_clk"));
-	pr_info("exynos5440 clock initialization complete\n");
-}
-CLK_OF_DECLARE(exynos5440_clk, "samsung,exynos5440-clock", exynos5440_clk_init);
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index bdce448..65897e3 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -47,20 +47,6 @@
           This add the CPUfreq driver support for Versatile Express
 	  big.LITTLE platforms using SPC for power management.
 
-config ARM_EXYNOS5440_CPUFREQ
-	tristate "SAMSUNG EXYNOS5440"
-	depends on SOC_EXYNOS5440
-	depends on HAVE_CLK && OF
-	select PM_OPP
-	default y
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS5440
-	  SoC. The nature of exynos5440 clock controller is
-	  different than previous exynos controllers so not using
-	  the common exynos framework.
-
-	  If in doubt, say N.
-
 config ARM_HIGHBANK_CPUFREQ
 	tristate "Calxeda Highbank-based"
 	depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 812f9e0..36f6f16 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -54,7 +54,6 @@
 
 obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
-obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
deleted file mode 100644
index b6b369c..0000000
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Amit Daniel Kachhap <amit.daniel@samsung.com>
- *
- * EXYNOS5440 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/clk.h>
-#include <linux/cpu.h>
-#include <linux/cpufreq.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/pm_opp.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/* Register definitions */
-#define XMU_DVFS_CTRL		0x0060
-#define XMU_PMU_P0_7		0x0064
-#define XMU_C0_3_PSTATE		0x0090
-#define XMU_P_LIMIT		0x00a0
-#define XMU_P_STATUS		0x00a4
-#define XMU_PMUEVTEN		0x00d0
-#define XMU_PMUIRQEN		0x00d4
-#define XMU_PMUIRQ		0x00d8
-
-/* PMU mask and shift definations */
-#define P_VALUE_MASK		0x7
-
-#define XMU_DVFS_CTRL_EN_SHIFT	0
-
-#define P0_7_CPUCLKDEV_SHIFT	21
-#define P0_7_CPUCLKDEV_MASK	0x7
-#define P0_7_ATBCLKDEV_SHIFT	18
-#define P0_7_ATBCLKDEV_MASK	0x7
-#define P0_7_CSCLKDEV_SHIFT	15
-#define P0_7_CSCLKDEV_MASK	0x7
-#define P0_7_CPUEMA_SHIFT	28
-#define P0_7_CPUEMA_MASK	0xf
-#define P0_7_L2EMA_SHIFT	24
-#define P0_7_L2EMA_MASK		0xf
-#define P0_7_VDD_SHIFT		8
-#define P0_7_VDD_MASK		0x7f
-#define P0_7_FREQ_SHIFT		0
-#define P0_7_FREQ_MASK		0xff
-
-#define C0_3_PSTATE_VALID_SHIFT	8
-#define C0_3_PSTATE_CURR_SHIFT	4
-#define C0_3_PSTATE_NEW_SHIFT	0
-
-#define PSTATE_CHANGED_EVTEN_SHIFT	0
-
-#define PSTATE_CHANGED_IRQEN_SHIFT	0
-
-#define PSTATE_CHANGED_SHIFT		0
-
-/* some constant values for clock divider calculation */
-#define CPU_DIV_FREQ_MAX	500
-#define CPU_DBG_FREQ_MAX	375
-#define CPU_ATB_FREQ_MAX	500
-
-#define PMIC_LOW_VOLT		0x30
-#define PMIC_HIGH_VOLT		0x28
-
-#define CPUEMA_HIGH		0x2
-#define CPUEMA_MID		0x4
-#define CPUEMA_LOW		0x7
-
-#define L2EMA_HIGH		0x1
-#define L2EMA_MID		0x3
-#define L2EMA_LOW		0x4
-
-#define DIV_TAB_MAX	2
-/* frequency unit is 20MHZ */
-#define FREQ_UNIT	20
-#define MAX_VOLTAGE	1550000 /* In microvolt */
-#define VOLTAGE_STEP	12500	/* In microvolt */
-
-#define CPUFREQ_NAME		"exynos5440_dvfs"
-#define DEF_TRANS_LATENCY	100000
-
-enum cpufreq_level_index {
-	L0, L1, L2, L3, L4,
-	L5, L6, L7, L8, L9,
-};
-#define CPUFREQ_LEVEL_END	(L7 + 1)
-
-struct exynos_dvfs_data {
-	void __iomem *base;
-	struct resource *mem;
-	int irq;
-	struct clk *cpu_clk;
-	unsigned int latency;
-	struct cpufreq_frequency_table *freq_table;
-	unsigned int freq_count;
-	struct device *dev;
-	bool dvfs_enabled;
-	struct work_struct irq_work;
-};
-
-static struct exynos_dvfs_data *dvfs_info;
-static DEFINE_MUTEX(cpufreq_lock);
-static struct cpufreq_freqs freqs;
-
-static int init_div_table(void)
-{
-	struct cpufreq_frequency_table *pos, *freq_tbl = dvfs_info->freq_table;
-	unsigned int tmp, clk_div, ema_div, freq, volt_id;
-	struct dev_pm_opp *opp;
-
-	cpufreq_for_each_entry(pos, freq_tbl) {
-		opp = dev_pm_opp_find_freq_exact(dvfs_info->dev,
-					pos->frequency * 1000, true);
-		if (IS_ERR(opp)) {
-			dev_err(dvfs_info->dev,
-				"failed to find valid OPP for %u KHZ\n",
-				pos->frequency);
-			return PTR_ERR(opp);
-		}
-
-		freq = pos->frequency / 1000; /* In MHZ */
-		clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK)
-					<< P0_7_CPUCLKDEV_SHIFT;
-		clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK)
-					<< P0_7_ATBCLKDEV_SHIFT;
-		clk_div |= ((freq / CPU_DBG_FREQ_MAX) & P0_7_CSCLKDEV_MASK)
-					<< P0_7_CSCLKDEV_SHIFT;
-
-		/* Calculate EMA */
-		volt_id = dev_pm_opp_get_voltage(opp);
-
-		volt_id = (MAX_VOLTAGE - volt_id) / VOLTAGE_STEP;
-		if (volt_id < PMIC_HIGH_VOLT) {
-			ema_div = (CPUEMA_HIGH << P0_7_CPUEMA_SHIFT) |
-				(L2EMA_HIGH << P0_7_L2EMA_SHIFT);
-		} else if (volt_id > PMIC_LOW_VOLT) {
-			ema_div = (CPUEMA_LOW << P0_7_CPUEMA_SHIFT) |
-				(L2EMA_LOW << P0_7_L2EMA_SHIFT);
-		} else {
-			ema_div = (CPUEMA_MID << P0_7_CPUEMA_SHIFT) |
-				(L2EMA_MID << P0_7_L2EMA_SHIFT);
-		}
-
-		tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT)
-			| ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT));
-
-		__raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 *
-						(pos - freq_tbl));
-		dev_pm_opp_put(opp);
-	}
-
-	return 0;
-}
-
-static void exynos_enable_dvfs(unsigned int cur_frequency)
-{
-	unsigned int tmp, cpu;
-	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
-	struct cpufreq_frequency_table *pos;
-	/* Disable DVFS */
-	__raw_writel(0,	dvfs_info->base + XMU_DVFS_CTRL);
-
-	/* Enable PSTATE Change Event */
-	tmp = __raw_readl(dvfs_info->base + XMU_PMUEVTEN);
-	tmp |= (1 << PSTATE_CHANGED_EVTEN_SHIFT);
-	__raw_writel(tmp, dvfs_info->base + XMU_PMUEVTEN);
-
-	/* Enable PSTATE Change IRQ */
-	tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQEN);
-	tmp |= (1 << PSTATE_CHANGED_IRQEN_SHIFT);
-	__raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN);
-
-	/* Set initial performance index */
-	cpufreq_for_each_entry(pos, freq_table)
-		if (pos->frequency == cur_frequency)
-			break;
-
-	if (pos->frequency == CPUFREQ_TABLE_END) {
-		dev_crit(dvfs_info->dev, "Boot up frequency not supported\n");
-		/* Assign the highest frequency */
-		pos = freq_table;
-		cur_frequency = pos->frequency;
-	}
-
-	dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ",
-						cur_frequency);
-
-	for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) {
-		tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
-		tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
-		tmp |= ((pos - freq_table) << C0_3_PSTATE_NEW_SHIFT);
-		__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
-	}
-
-	/* Enable DVFS */
-	__raw_writel(1 << XMU_DVFS_CTRL_EN_SHIFT,
-				dvfs_info->base + XMU_DVFS_CTRL);
-}
-
-static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
-{
-	unsigned int tmp;
-	int i;
-	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
-
-	mutex_lock(&cpufreq_lock);
-
-	freqs.old = policy->cur;
-	freqs.new = freq_table[index].frequency;
-
-	cpufreq_freq_transition_begin(policy, &freqs);
-
-	/* Set the target frequency in all C0_3_PSTATE register */
-	for_each_cpu(i, policy->cpus) {
-		tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + i * 4);
-		tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
-		tmp |= (index << C0_3_PSTATE_NEW_SHIFT);
-
-		__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + i * 4);
-	}
-	mutex_unlock(&cpufreq_lock);
-	return 0;
-}
-
-static void exynos_cpufreq_work(struct work_struct *work)
-{
-	unsigned int cur_pstate, index;
-	struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
-	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
-
-	/* Ensure we can access cpufreq structures */
-	if (unlikely(dvfs_info->dvfs_enabled == false))
-		goto skip_work;
-
-	mutex_lock(&cpufreq_lock);
-	freqs.old = policy->cur;
-
-	cur_pstate = __raw_readl(dvfs_info->base + XMU_P_STATUS);
-	if (cur_pstate >> C0_3_PSTATE_VALID_SHIFT & 0x1)
-		index = (cur_pstate >> C0_3_PSTATE_CURR_SHIFT) & P_VALUE_MASK;
-	else
-		index = (cur_pstate >> C0_3_PSTATE_NEW_SHIFT) & P_VALUE_MASK;
-
-	if (likely(index < dvfs_info->freq_count)) {
-		freqs.new = freq_table[index].frequency;
-	} else {
-		dev_crit(dvfs_info->dev, "New frequency out of range\n");
-		freqs.new = freqs.old;
-	}
-	cpufreq_freq_transition_end(policy, &freqs, 0);
-
-	cpufreq_cpu_put(policy);
-	mutex_unlock(&cpufreq_lock);
-skip_work:
-	enable_irq(dvfs_info->irq);
-}
-
-static irqreturn_t exynos_cpufreq_irq(int irq, void *id)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQ);
-	if (tmp >> PSTATE_CHANGED_SHIFT & 0x1) {
-		__raw_writel(tmp, dvfs_info->base + XMU_PMUIRQ);
-		disable_irq_nosync(irq);
-		schedule_work(&dvfs_info->irq_work);
-	}
-	return IRQ_HANDLED;
-}
-
-static void exynos_sort_descend_freq_table(void)
-{
-	struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;
-	int i = 0, index;
-	unsigned int tmp_freq;
-	/*
-	 * Exynos5440 clock controller state logic expects the cpufreq table to
-	 * be in descending order. But the OPP library constructs the table in
-	 * ascending order. So to make the table descending we just need to
-	 * swap the i element with the N - i element.
-	 */
-	for (i = 0; i < dvfs_info->freq_count / 2; i++) {
-		index = dvfs_info->freq_count - i - 1;
-		tmp_freq = freq_tbl[i].frequency;
-		freq_tbl[i].frequency = freq_tbl[index].frequency;
-		freq_tbl[index].frequency = tmp_freq;
-	}
-}
-
-static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	policy->clk = dvfs_info->cpu_clk;
-	return cpufreq_generic_init(policy, dvfs_info->freq_table,
-			dvfs_info->latency);
-}
-
-static struct cpufreq_driver exynos_driver = {
-	.flags		= CPUFREQ_STICKY | CPUFREQ_ASYNC_NOTIFICATION |
-				CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify		= cpufreq_generic_frequency_table_verify,
-	.target_index	= exynos_target,
-	.get		= cpufreq_generic_get,
-	.init		= exynos_cpufreq_cpu_init,
-	.name		= CPUFREQ_NAME,
-	.attr		= cpufreq_generic_attr,
-};
-
-static const struct of_device_id exynos_cpufreq_match[] = {
-	{
-		.compatible = "samsung,exynos5440-cpufreq",
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, exynos_cpufreq_match);
-
-static int exynos_cpufreq_probe(struct platform_device *pdev)
-{
-	int ret = -EINVAL;
-	struct device_node *np;
-	struct resource res;
-	unsigned int cur_frequency;
-
-	np = pdev->dev.of_node;
-	if (!np)
-		return -ENODEV;
-
-	dvfs_info = devm_kzalloc(&pdev->dev, sizeof(*dvfs_info), GFP_KERNEL);
-	if (!dvfs_info) {
-		ret = -ENOMEM;
-		goto err_put_node;
-	}
-
-	dvfs_info->dev = &pdev->dev;
-
-	ret = of_address_to_resource(np, 0, &res);
-	if (ret)
-		goto err_put_node;
-
-	dvfs_info->base = devm_ioremap_resource(dvfs_info->dev, &res);
-	if (IS_ERR(dvfs_info->base)) {
-		ret = PTR_ERR(dvfs_info->base);
-		goto err_put_node;
-	}
-
-	dvfs_info->irq = irq_of_parse_and_map(np, 0);
-	if (!dvfs_info->irq) {
-		dev_err(dvfs_info->dev, "No cpufreq irq found\n");
-		ret = -ENODEV;
-		goto err_put_node;
-	}
-
-	ret = dev_pm_opp_of_add_table(dvfs_info->dev);
-	if (ret) {
-		dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret);
-		goto err_put_node;
-	}
-
-	ret = dev_pm_opp_init_cpufreq_table(dvfs_info->dev,
-					    &dvfs_info->freq_table);
-	if (ret) {
-		dev_err(dvfs_info->dev,
-			"failed to init cpufreq table: %d\n", ret);
-		goto err_free_opp;
-	}
-	dvfs_info->freq_count = dev_pm_opp_get_opp_count(dvfs_info->dev);
-	exynos_sort_descend_freq_table();
-
-	if (of_property_read_u32(np, "clock-latency", &dvfs_info->latency))
-		dvfs_info->latency = DEF_TRANS_LATENCY;
-
-	dvfs_info->cpu_clk = devm_clk_get(dvfs_info->dev, "armclk");
-	if (IS_ERR(dvfs_info->cpu_clk)) {
-		dev_err(dvfs_info->dev, "Failed to get cpu clock\n");
-		ret = PTR_ERR(dvfs_info->cpu_clk);
-		goto err_free_table;
-	}
-
-	cur_frequency = clk_get_rate(dvfs_info->cpu_clk);
-	if (!cur_frequency) {
-		dev_err(dvfs_info->dev, "Failed to get clock rate\n");
-		ret = -EINVAL;
-		goto err_free_table;
-	}
-	cur_frequency /= 1000;
-
-	INIT_WORK(&dvfs_info->irq_work, exynos_cpufreq_work);
-	ret = devm_request_irq(dvfs_info->dev, dvfs_info->irq,
-				exynos_cpufreq_irq, IRQF_TRIGGER_NONE,
-				CPUFREQ_NAME, dvfs_info);
-	if (ret) {
-		dev_err(dvfs_info->dev, "Failed to register IRQ\n");
-		goto err_free_table;
-	}
-
-	ret = init_div_table();
-	if (ret) {
-		dev_err(dvfs_info->dev, "Failed to initialise div table\n");
-		goto err_free_table;
-	}
-
-	exynos_enable_dvfs(cur_frequency);
-	ret = cpufreq_register_driver(&exynos_driver);
-	if (ret) {
-		dev_err(dvfs_info->dev,
-			"%s: failed to register cpufreq driver\n", __func__);
-		goto err_free_table;
-	}
-
-	of_node_put(np);
-	dvfs_info->dvfs_enabled = true;
-	return 0;
-
-err_free_table:
-	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
-err_free_opp:
-	dev_pm_opp_of_remove_table(dvfs_info->dev);
-err_put_node:
-	of_node_put(np);
-	dev_err(&pdev->dev, "%s: failed initialization\n", __func__);
-	return ret;
-}
-
-static int exynos_cpufreq_remove(struct platform_device *pdev)
-{
-	cpufreq_unregister_driver(&exynos_driver);
-	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
-	dev_pm_opp_of_remove_table(dvfs_info->dev);
-	return 0;
-}
-
-static struct platform_driver exynos_cpufreq_platdrv = {
-	.driver = {
-		.name	= "exynos5440-cpufreq",
-		.of_match_table = exynos_cpufreq_match,
-	},
-	.probe		= exynos_cpufreq_probe,
-	.remove		= exynos_cpufreq_remove,
-};
-module_platform_driver(exynos_cpufreq_platdrv);
-
-MODULE_AUTHOR("Amit Daniel Kachhap <amit.daniel@samsung.com>");
-MODULE_DESCRIPTION("Exynos5440 cpufreq driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5d97510..9fe2b69 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -154,8 +154,6 @@ static const struct of_device_id s3c24xx_i2c_match[] = {
 	{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
 	{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
 	  .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
-	{ .compatible = "samsung,exynos5440-i2c",
-	  .data = (void *)(QUIRK_S3C2440 | QUIRK_NO_GPIO) },
 	{ .compatible = "samsung,exynos5-sata-phy-i2c",
 	  .data = (void *)(QUIRK_S3C2440 | QUIRK_POLL | QUIRK_NO_GPIO) },
 	{},
diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
index 113e094..58b86d8 100644
--- a/drivers/pci/dwc/Kconfig
+++ b/drivers/pci/dwc/Kconfig
@@ -65,7 +65,6 @@
 config PCI_EXYNOS
 	bool "Samsung Exynos PCIe controller"
 	depends on PCI
-	depends on SOC_EXYNOS5440
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
 	select PCIE_DW_HOST
diff --git a/drivers/pinctrl/samsung/Kconfig b/drivers/pinctrl/samsung/Kconfig
index ecfb900..47d50c2 100644
--- a/drivers/pinctrl/samsung/Kconfig
+++ b/drivers/pinctrl/samsung/Kconfig
@@ -7,26 +7,20 @@
 	select PINCONF
 
 config PINCTRL_EXYNOS
-	bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440"
+	bool "Pinctrl driver data for Samsung EXYNOS SoCs"
 	depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210)
 	select PINCTRL_SAMSUNG
 	select PINCTRL_EXYNOS_ARM if ARM && (ARCH_EXYNOS || ARCH_S5PV210)
 	select PINCTRL_EXYNOS_ARM64 if ARM64 && ARCH_EXYNOS
 
 config PINCTRL_EXYNOS_ARM
-	bool "ARMv7-specific pinctrl driver data for Exynos (except Exynos5440)" if COMPILE_TEST
+	bool "ARMv7-specific pinctrl driver data for Exynos" if COMPILE_TEST
 	depends on PINCTRL_EXYNOS
 
 config PINCTRL_EXYNOS_ARM64
 	bool "ARMv8-specific pinctrl driver data for Exynos" if COMPILE_TEST
 	depends on PINCTRL_EXYNOS
 
-config PINCTRL_EXYNOS5440
-	bool "Samsung EXYNOS5440 SoC pinctrl driver"
-	depends on SOC_EXYNOS5440
-	select PINMUX
-	select PINCONF
-
 config PINCTRL_S3C24XX
 	bool "Samsung S3C24XX SoC pinctrl driver"
 	depends on ARCH_S3C24XX && OF
diff --git a/drivers/pinctrl/samsung/Makefile b/drivers/pinctrl/samsung/Makefile
index df426561..ed951df 100644
--- a/drivers/pinctrl/samsung/Makefile
+++ b/drivers/pinctrl/samsung/Makefile
@@ -5,6 +5,5 @@
 obj-$(CONFIG_PINCTRL_EXYNOS)	+= pinctrl-exynos.o
 obj-$(CONFIG_PINCTRL_EXYNOS_ARM)	+= pinctrl-exynos-arm.o
 obj-$(CONFIG_PINCTRL_EXYNOS_ARM64)	+= pinctrl-exynos-arm64.o
-obj-$(CONFIG_PINCTRL_EXYNOS5440)	+= pinctrl-exynos5440.o
 obj-$(CONFIG_PINCTRL_S3C24XX)	+= pinctrl-s3c24xx.o
 obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos5440.c b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
deleted file mode 100644
index 32a3a9f..0000000
--- a/drivers/pinctrl/samsung/pinctrl-exynos5440.c
+++ /dev/null
@@ -1,1010 +0,0 @@
-/*
- * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's EXYNOS5440 SoC.
- *
- * Author: Thomas Abraham <thomas.ab@samsung.com>
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/gpio/driver.h>
-#include <linux/device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include "../core.h"
-
-/* EXYNOS5440 GPIO and Pinctrl register offsets */
-#define GPIO_MUX		0x00
-#define GPIO_IE			0x04
-#define GPIO_INT		0x08
-#define GPIO_TYPE		0x0C
-#define GPIO_VAL		0x10
-#define GPIO_OE			0x14
-#define GPIO_IN			0x18
-#define GPIO_PE			0x1C
-#define GPIO_PS			0x20
-#define GPIO_SR			0x24
-#define GPIO_DS0		0x28
-#define GPIO_DS1		0x2C
-
-#define EXYNOS5440_MAX_PINS		23
-#define EXYNOS5440_MAX_GPIO_INT	8
-#define PIN_NAME_LENGTH		10
-
-#define GROUP_SUFFIX		"-grp"
-#define FUNCTION_SUFFIX		"-mux"
-
-/*
- * pin configuration type and its value are packed together into a 16-bits.
- * The upper 8-bits represent the configuration type and the lower 8-bits
- * hold the value of the configuration type.
- */
-#define PINCFG_TYPE_MASK		0xFF
-#define PINCFG_VALUE_SHIFT		8
-#define PINCFG_VALUE_MASK		(0xFF << PINCFG_VALUE_SHIFT)
-#define PINCFG_PACK(type, value)	(((value) << PINCFG_VALUE_SHIFT) | type)
-#define PINCFG_UNPACK_TYPE(cfg)		((cfg) & PINCFG_TYPE_MASK)
-#define PINCFG_UNPACK_VALUE(cfg)	(((cfg) & PINCFG_VALUE_MASK) >> \
-						PINCFG_VALUE_SHIFT)
-
-/**
- * enum pincfg_type - possible pin configuration types supported.
- * @PINCFG_TYPE_PUD: Pull up/down configuration.
- * @PINCFG_TYPE_DRV: Drive strength configuration.
- * @PINCFG_TYPE_SKEW_RATE: Skew rate configuration.
- * @PINCFG_TYPE_INPUT_TYPE: Pin input type configuration.
- */
-enum pincfg_type {
-	PINCFG_TYPE_PUD,
-	PINCFG_TYPE_DRV,
-	PINCFG_TYPE_SKEW_RATE,
-	PINCFG_TYPE_INPUT_TYPE
-};
-
-/**
- * struct exynos5440_pin_group: represent group of pins for pincfg setting.
- * @name: name of the pin group, used to lookup the group.
- * @pins: the pins included in this group.
- * @num_pins: number of pins included in this group.
- */
-struct exynos5440_pin_group {
-	const char		*name;
-	const unsigned int	*pins;
-	u8			num_pins;
-};
-
-/**
- * struct exynos5440_pmx_func: represent a pin function.
- * @name: name of the pin function, used to lookup the function.
- * @groups: one or more names of pin groups that provide this function.
- * @num_groups: number of groups included in @groups.
- * @function: the function number to be programmed when selected.
- */
-struct exynos5440_pmx_func {
-	const char		*name;
-	const char		**groups;
-	u8			num_groups;
-	unsigned long		function;
-};
-
-/**
- * struct exynos5440_pinctrl_priv_data: driver's private runtime data.
- * @reg_base: ioremapped based address of the register space.
- * @gc: gpio chip registered with gpiolib.
- * @pin_groups: list of pin groups parsed from device tree.
- * @nr_groups: number of pin groups available.
- * @pmx_functions: list of pin functions parsed from device tree.
- * @nr_functions: number of pin functions available.
- * @range: gpio range to register with pinctrl
- */
-struct exynos5440_pinctrl_priv_data {
-	void __iomem			*reg_base;
-	struct gpio_chip		*gc;
-	struct irq_domain		*irq_domain;
-
-	const struct exynos5440_pin_group	*pin_groups;
-	unsigned int			nr_groups;
-	const struct exynos5440_pmx_func	*pmx_functions;
-	unsigned int			nr_functions;
-	struct pinctrl_gpio_range	range;
-};
-
-/**
- * struct exynos5440_gpio_intr_data: private data for gpio interrupts.
- * @priv: driver's private runtime data.
- * @gpio_int: gpio interrupt number.
- */
-struct exynos5440_gpio_intr_data {
-	struct exynos5440_pinctrl_priv_data	*priv;
-	unsigned int				gpio_int;
-};
-
-/* list of all possible config options supported */
-static struct pin_config {
-	char		*prop_cfg;
-	unsigned int	cfg_type;
-} pcfgs[] = {
-	{ "samsung,exynos5440-pin-pud", PINCFG_TYPE_PUD },
-	{ "samsung,exynos5440-pin-drv", PINCFG_TYPE_DRV },
-	{ "samsung,exynos5440-pin-skew-rate", PINCFG_TYPE_SKEW_RATE },
-	{ "samsung,exynos5440-pin-input-type", PINCFG_TYPE_INPUT_TYPE },
-};
-
-/* check if the selector is a valid pin group selector */
-static int exynos5440_get_group_count(struct pinctrl_dev *pctldev)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	return priv->nr_groups;
-}
-
-/* return the name of the group selected by the group selector */
-static const char *exynos5440_get_group_name(struct pinctrl_dev *pctldev,
-						unsigned selector)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	return priv->pin_groups[selector].name;
-}
-
-/* return the pin numbers associated with the specified group */
-static int exynos5440_get_group_pins(struct pinctrl_dev *pctldev,
-		unsigned selector, const unsigned **pins, unsigned *num_pins)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	*pins = priv->pin_groups[selector].pins;
-	*num_pins = priv->pin_groups[selector].num_pins;
-	return 0;
-}
-
-/* create pinctrl_map entries by parsing device tree nodes */
-static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
-			struct device_node *np, struct pinctrl_map **maps,
-			unsigned *nmaps)
-{
-	struct device *dev = pctldev->dev;
-	struct pinctrl_map *map;
-	unsigned long *cfg = NULL;
-	char *gname, *fname;
-	int cfg_cnt = 0, map_cnt = 0, idx = 0;
-
-	/* count the number of config options specfied in the node */
-	for (idx = 0; idx < ARRAY_SIZE(pcfgs); idx++)
-		if (of_find_property(np, pcfgs[idx].prop_cfg, NULL))
-			cfg_cnt++;
-
-	/*
-	 * Find out the number of map entries to create. All the config options
-	 * can be accomadated into a single config map entry.
-	 */
-	if (cfg_cnt)
-		map_cnt = 1;
-	if (of_find_property(np, "samsung,exynos5440-pin-function", NULL))
-		map_cnt++;
-	if (!map_cnt) {
-		dev_err(dev, "node %s does not have either config or function "
-				"configurations\n", np->name);
-		return -EINVAL;
-	}
-
-	/* Allocate memory for pin-map entries */
-	map = kzalloc(sizeof(*map) * map_cnt, GFP_KERNEL);
-	if (!map)
-		return -ENOMEM;
-	*nmaps = 0;
-
-	/*
-	 * Allocate memory for pin group name. The pin group name is derived
-	 * from the node name from which these map entries are be created.
-	 */
-	gname = kasprintf(GFP_KERNEL, "%s%s", np->name, GROUP_SUFFIX);
-	if (!gname)
-		goto free_map;
-
-	/*
-	 * don't have config options? then skip over to creating function
-	 * map entries.
-	 */
-	if (!cfg_cnt)
-		goto skip_cfgs;
-
-	/* Allocate memory for config entries */
-	cfg = kzalloc(sizeof(*cfg) * cfg_cnt, GFP_KERNEL);
-	if (!cfg)
-		goto free_gname;
-
-	/* Prepare a list of config settings */
-	for (idx = 0, cfg_cnt = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
-		u32 value;
-		if (!of_property_read_u32(np, pcfgs[idx].prop_cfg, &value))
-			cfg[cfg_cnt++] =
-				PINCFG_PACK(pcfgs[idx].cfg_type, value);
-	}
-
-	/* create the config map entry */
-	map[*nmaps].data.configs.group_or_pin = gname;
-	map[*nmaps].data.configs.configs = cfg;
-	map[*nmaps].data.configs.num_configs = cfg_cnt;
-	map[*nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
-	*nmaps += 1;
-
-skip_cfgs:
-	/* create the function map entry */
-	if (of_find_property(np, "samsung,exynos5440-pin-function", NULL)) {
-		fname = kasprintf(GFP_KERNEL,
-				  "%s%s", np->name, FUNCTION_SUFFIX);
-		if (!fname)
-			goto free_cfg;
-
-		map[*nmaps].data.mux.group = gname;
-		map[*nmaps].data.mux.function = fname;
-		map[*nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
-		*nmaps += 1;
-	}
-
-	*maps = map;
-	return 0;
-
-free_cfg:
-	kfree(cfg);
-free_gname:
-	kfree(gname);
-free_map:
-	kfree(map);
-	return -ENOMEM;
-}
-
-/* free the memory allocated to hold the pin-map table */
-static void exynos5440_dt_free_map(struct pinctrl_dev *pctldev,
-			     struct pinctrl_map *map, unsigned num_maps)
-{
-	int idx;
-
-	for (idx = 0; idx < num_maps; idx++) {
-		if (map[idx].type == PIN_MAP_TYPE_MUX_GROUP) {
-			kfree(map[idx].data.mux.function);
-			if (!idx)
-				kfree(map[idx].data.mux.group);
-		} else if (map->type == PIN_MAP_TYPE_CONFIGS_GROUP) {
-			kfree(map[idx].data.configs.configs);
-			if (!idx)
-				kfree(map[idx].data.configs.group_or_pin);
-		}
-	}
-
-	kfree(map);
-}
-
-/* list of pinctrl callbacks for the pinctrl core */
-static const struct pinctrl_ops exynos5440_pctrl_ops = {
-	.get_groups_count	= exynos5440_get_group_count,
-	.get_group_name		= exynos5440_get_group_name,
-	.get_group_pins		= exynos5440_get_group_pins,
-	.dt_node_to_map		= exynos5440_dt_node_to_map,
-	.dt_free_map		= exynos5440_dt_free_map,
-};
-
-/* check if the selector is a valid pin function selector */
-static int exynos5440_get_functions_count(struct pinctrl_dev *pctldev)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	return priv->nr_functions;
-}
-
-/* return the name of the pin function specified */
-static const char *exynos5440_pinmux_get_fname(struct pinctrl_dev *pctldev,
-						unsigned selector)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	return priv->pmx_functions[selector].name;
-}
-
-/* return the groups associated for the specified function selector */
-static int exynos5440_pinmux_get_groups(struct pinctrl_dev *pctldev,
-		unsigned selector, const char * const **groups,
-		unsigned * const num_groups)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	*groups = priv->pmx_functions[selector].groups;
-	*num_groups = priv->pmx_functions[selector].num_groups;
-	return 0;
-}
-
-/* enable or disable a pinmux function */
-static void exynos5440_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
-					unsigned group, bool enable)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-	void __iomem *base;
-	u32 function;
-	u32 data;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	base = priv->reg_base;
-	function = priv->pmx_functions[selector].function;
-
-	data = readl(base + GPIO_MUX);
-	if (enable)
-		data |= (1 << function);
-	else
-		data &= ~(1 << function);
-	writel(data, base + GPIO_MUX);
-}
-
-/* enable a specified pinmux by writing to registers */
-static int exynos5440_pinmux_set_mux(struct pinctrl_dev *pctldev,
-				     unsigned selector,
-				     unsigned group)
-{
-	exynos5440_pinmux_setup(pctldev, selector, group, true);
-	return 0;
-}
-
-/*
- * The calls to gpio_direction_output() and gpio_direction_input()
- * leads to this function call (via the pinctrl_gpio_direction_{input|output}()
- * function called from the gpiolib interface).
- */
-static int exynos5440_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
-		struct pinctrl_gpio_range *range, unsigned offset, bool input)
-{
-	return 0;
-}
-
-/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
-static const struct pinmux_ops exynos5440_pinmux_ops = {
-	.get_functions_count	= exynos5440_get_functions_count,
-	.get_function_name	= exynos5440_pinmux_get_fname,
-	.get_function_groups	= exynos5440_pinmux_get_groups,
-	.set_mux		= exynos5440_pinmux_set_mux,
-	.gpio_set_direction	= exynos5440_pinmux_gpio_set_direction,
-};
-
-/* set the pin config settings for a specified pin */
-static int exynos5440_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
-				unsigned long *configs,
-				unsigned num_configs)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-	void __iomem *base;
-	enum pincfg_type cfg_type;
-	u32 cfg_value;
-	u32 data;
-	int i;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	base = priv->reg_base;
-
-	for (i = 0; i < num_configs; i++) {
-		cfg_type = PINCFG_UNPACK_TYPE(configs[i]);
-		cfg_value = PINCFG_UNPACK_VALUE(configs[i]);
-
-		switch (cfg_type) {
-		case PINCFG_TYPE_PUD:
-			/* first set pull enable/disable bit */
-			data = readl(base + GPIO_PE);
-			data &= ~(1 << pin);
-			if (cfg_value)
-				data |= (1 << pin);
-			writel(data, base + GPIO_PE);
-
-			/* then set pull up/down bit */
-			data = readl(base + GPIO_PS);
-			data &= ~(1 << pin);
-			if (cfg_value == 2)
-				data |= (1 << pin);
-			writel(data, base + GPIO_PS);
-			break;
-
-		case PINCFG_TYPE_DRV:
-			/* set the first bit of the drive strength */
-			data = readl(base + GPIO_DS0);
-			data &= ~(1 << pin);
-			data |= ((cfg_value & 1) << pin);
-			writel(data, base + GPIO_DS0);
-			cfg_value >>= 1;
-
-			/* set the second bit of the driver strength */
-			data = readl(base + GPIO_DS1);
-			data &= ~(1 << pin);
-			data |= ((cfg_value & 1) << pin);
-			writel(data, base + GPIO_DS1);
-			break;
-		case PINCFG_TYPE_SKEW_RATE:
-			data = readl(base + GPIO_SR);
-			data &= ~(1 << pin);
-			data |= ((cfg_value & 1) << pin);
-			writel(data, base + GPIO_SR);
-			break;
-		case PINCFG_TYPE_INPUT_TYPE:
-			data = readl(base + GPIO_TYPE);
-			data &= ~(1 << pin);
-			data |= ((cfg_value & 1) << pin);
-			writel(data, base + GPIO_TYPE);
-			break;
-		default:
-			WARN_ON(1);
-			return -EINVAL;
-		}
-	} /* for each config */
-
-	return 0;
-}
-
-/* get the pin config settings for a specified pin */
-static int exynos5440_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
-					unsigned long *config)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-	void __iomem *base;
-	enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config);
-	u32 data;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	base = priv->reg_base;
-
-	switch (cfg_type) {
-	case PINCFG_TYPE_PUD:
-		data = readl(base + GPIO_PE);
-		data = (data >> pin) & 1;
-		if (!data)
-			*config = 0;
-		else
-			*config = ((readl(base + GPIO_PS) >> pin) & 1) + 1;
-		break;
-	case PINCFG_TYPE_DRV:
-		data = readl(base + GPIO_DS0);
-		data = (data >> pin) & 1;
-		*config = data;
-		data = readl(base + GPIO_DS1);
-		data = (data >> pin) & 1;
-		*config |= (data << 1);
-		break;
-	case PINCFG_TYPE_SKEW_RATE:
-		data = readl(base + GPIO_SR);
-		*config = (data >> pin) & 1;
-		break;
-	case PINCFG_TYPE_INPUT_TYPE:
-		data = readl(base + GPIO_TYPE);
-		*config = (data >> pin) & 1;
-		break;
-	default:
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* set the pin config settings for a specified pin group */
-static int exynos5440_pinconf_group_set(struct pinctrl_dev *pctldev,
-			unsigned group, unsigned long *configs,
-			unsigned num_configs)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-	const unsigned int *pins;
-	unsigned int cnt;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	pins = priv->pin_groups[group].pins;
-
-	for (cnt = 0; cnt < priv->pin_groups[group].num_pins; cnt++)
-		exynos5440_pinconf_set(pctldev, pins[cnt], configs,
-				       num_configs);
-
-	return 0;
-}
-
-/* get the pin config settings for a specified pin group */
-static int exynos5440_pinconf_group_get(struct pinctrl_dev *pctldev,
-				unsigned int group, unsigned long *config)
-{
-	struct exynos5440_pinctrl_priv_data *priv;
-	const unsigned int *pins;
-
-	priv = pinctrl_dev_get_drvdata(pctldev);
-	pins = priv->pin_groups[group].pins;
-	exynos5440_pinconf_get(pctldev, pins[0], config);
-	return 0;
-}
-
-/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
-static const struct pinconf_ops exynos5440_pinconf_ops = {
-	.pin_config_get		= exynos5440_pinconf_get,
-	.pin_config_set		= exynos5440_pinconf_set,
-	.pin_config_group_get	= exynos5440_pinconf_group_get,
-	.pin_config_group_set	= exynos5440_pinconf_group_set,
-};
-
-/* gpiolib gpio_set callback function */
-static void exynos5440_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
-{
-	struct exynos5440_pinctrl_priv_data *priv = gpiochip_get_data(gc);
-	void __iomem *base = priv->reg_base;
-	u32 data;
-
-	data = readl(base + GPIO_VAL);
-	data &= ~(1 << offset);
-	if (value)
-		data |= 1 << offset;
-	writel(data, base + GPIO_VAL);
-}
-
-/* gpiolib gpio_get callback function */
-static int exynos5440_gpio_get(struct gpio_chip *gc, unsigned offset)
-{
-	struct exynos5440_pinctrl_priv_data *priv = gpiochip_get_data(gc);
-	void __iomem *base = priv->reg_base;
-	u32 data;
-
-	data = readl(base + GPIO_IN);
-	data >>= offset;
-	data &= 1;
-	return data;
-}
-
-/* gpiolib gpio_direction_input callback function */
-static int exynos5440_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
-{
-	struct exynos5440_pinctrl_priv_data *priv = gpiochip_get_data(gc);
-	void __iomem *base = priv->reg_base;
-	u32 data;
-
-	/* first disable the data output enable on this pin */
-	data = readl(base + GPIO_OE);
-	data &= ~(1 << offset);
-	writel(data, base + GPIO_OE);
-
-	/* now enable input on this pin */
-	data =  readl(base + GPIO_IE);
-	data |= 1 << offset;
-	writel(data, base + GPIO_IE);
-	return 0;
-}
-
-/* gpiolib gpio_direction_output callback function */
-static int exynos5440_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
-							int value)
-{
-	struct exynos5440_pinctrl_priv_data *priv = gpiochip_get_data(gc);
-	void __iomem *base = priv->reg_base;
-	u32 data;
-
-	exynos5440_gpio_set(gc, offset, value);
-
-	/* first disable the data input enable on this pin */
-	data = readl(base + GPIO_IE);
-	data &= ~(1 << offset);
-	writel(data, base + GPIO_IE);
-
-	/* now enable output on this pin */
-	data =  readl(base + GPIO_OE);
-	data |= 1 << offset;
-	writel(data, base + GPIO_OE);
-	return 0;
-}
-
-/* gpiolib gpio_to_irq callback function */
-static int exynos5440_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
-{
-	struct exynos5440_pinctrl_priv_data *priv = gpiochip_get_data(gc);
-	unsigned int virq;
-
-	if (offset < 16 || offset > 23)
-		return -ENXIO;
-
-	if (!priv->irq_domain)
-		return -ENXIO;
-
-	virq = irq_create_mapping(priv->irq_domain, offset - 16);
-	return virq ? : -ENXIO;
-}
-
-/* parse the pin numbers listed in the 'samsung,exynos5440-pins' property */
-static int exynos5440_pinctrl_parse_dt_pins(struct platform_device *pdev,
-			struct device_node *cfg_np, unsigned int **pin_list,
-			unsigned int *npins)
-{
-	struct device *dev = &pdev->dev;
-	struct property *prop;
-
-	prop = of_find_property(cfg_np, "samsung,exynos5440-pins", NULL);
-	if (!prop)
-		return -ENOENT;
-
-	*npins = prop->length / sizeof(unsigned long);
-	if (!*npins) {
-		dev_err(dev, "invalid pin list in %s node", cfg_np->name);
-		return -EINVAL;
-	}
-
-	*pin_list = devm_kzalloc(dev, *npins * sizeof(**pin_list), GFP_KERNEL);
-	if (!*pin_list)
-		return -ENOMEM;
-
-	return of_property_read_u32_array(cfg_np, "samsung,exynos5440-pins",
-			*pin_list, *npins);
-}
-
-/*
- * Parse the information about all the available pin groups and pin functions
- * from device node of the pin-controller.
- */
-static int exynos5440_pinctrl_parse_dt(struct platform_device *pdev,
-				struct exynos5440_pinctrl_priv_data *priv)
-{
-	struct device *dev = &pdev->dev;
-	struct device_node *dev_np = dev->of_node;
-	struct device_node *cfg_np;
-	struct exynos5440_pin_group *groups, *grp;
-	struct exynos5440_pmx_func *functions, *func;
-	unsigned *pin_list;
-	unsigned int npins, grp_cnt, func_idx = 0;
-	char *gname, *fname;
-	int ret;
-
-	grp_cnt = of_get_child_count(dev_np);
-	if (!grp_cnt)
-		return -EINVAL;
-
-	groups = devm_kzalloc(dev, grp_cnt * sizeof(*groups), GFP_KERNEL);
-	if (!groups)
-		return -EINVAL;
-
-	grp = groups;
-
-	functions = devm_kzalloc(dev, grp_cnt * sizeof(*functions), GFP_KERNEL);
-	if (!functions)
-		return -EINVAL;
-
-	func = functions;
-
-	/*
-	 * Iterate over all the child nodes of the pin controller node
-	 * and create pin groups and pin function lists.
-	 */
-	for_each_child_of_node(dev_np, cfg_np) {
-		u32 function;
-
-		ret = exynos5440_pinctrl_parse_dt_pins(pdev, cfg_np,
-					&pin_list, &npins);
-		if (ret) {
-			gname = NULL;
-			goto skip_to_pin_function;
-		}
-
-		/* derive pin group name from the node name */
-		gname = devm_kasprintf(dev, GFP_KERNEL,
-				       "%s%s", cfg_np->name, GROUP_SUFFIX);
-		if (!gname)
-			return -ENOMEM;
-
-		grp->name = gname;
-		grp->pins = pin_list;
-		grp->num_pins = npins;
-		grp++;
-
-skip_to_pin_function:
-		ret = of_property_read_u32(cfg_np, "samsung,exynos5440-pin-function",
-						&function);
-		if (ret)
-			continue;
-
-		/* derive function name from the node name */
-		fname = devm_kasprintf(dev, GFP_KERNEL,
-				       "%s%s", cfg_np->name, FUNCTION_SUFFIX);
-		if (!fname)
-			return -ENOMEM;
-
-		func->name = fname;
-		func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
-		if (!func->groups)
-			return -ENOMEM;
-		func->groups[0] = gname;
-		func->num_groups = gname ? 1 : 0;
-		func->function = function;
-		func++;
-		func_idx++;
-	}
-
-	priv->pin_groups = groups;
-	priv->nr_groups = grp_cnt;
-	priv->pmx_functions = functions;
-	priv->nr_functions = func_idx;
-	return 0;
-}
-
-/* register the pinctrl interface with the pinctrl subsystem */
-static int exynos5440_pinctrl_register(struct platform_device *pdev,
-				struct exynos5440_pinctrl_priv_data *priv)
-{
-	struct device *dev = &pdev->dev;
-	struct pinctrl_desc *ctrldesc;
-	struct pinctrl_dev *pctl_dev;
-	struct pinctrl_pin_desc *pindesc, *pdesc;
-	char *pin_names;
-	int pin, ret;
-
-	ctrldesc = devm_kzalloc(dev, sizeof(*ctrldesc), GFP_KERNEL);
-	if (!ctrldesc)
-		return -ENOMEM;
-
-	ctrldesc->name = "exynos5440-pinctrl";
-	ctrldesc->owner = THIS_MODULE;
-	ctrldesc->pctlops = &exynos5440_pctrl_ops;
-	ctrldesc->pmxops = &exynos5440_pinmux_ops;
-	ctrldesc->confops = &exynos5440_pinconf_ops;
-
-	pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) *
-				EXYNOS5440_MAX_PINS, GFP_KERNEL);
-	if (!pindesc)
-		return -ENOMEM;
-	ctrldesc->pins = pindesc;
-	ctrldesc->npins = EXYNOS5440_MAX_PINS;
-
-	/* dynamically populate the pin number and pin name for pindesc */
-	for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++)
-		pdesc->number = pin;
-
-	/*
-	 * allocate space for storing the dynamically generated names for all
-	 * the pins which belong to this pin-controller.
-	 */
-	pin_names = devm_kzalloc(&pdev->dev, sizeof(char) * PIN_NAME_LENGTH *
-					ctrldesc->npins, GFP_KERNEL);
-	if (!pin_names)
-		return -ENOMEM;
-
-	/* for each pin, set the name of the pin */
-	for (pin = 0; pin < ctrldesc->npins; pin++) {
-		snprintf(pin_names, 6, "gpio%02d", pin);
-		pdesc = pindesc + pin;
-		pdesc->name = pin_names;
-		pin_names += PIN_NAME_LENGTH;
-	}
-
-	ret = exynos5440_pinctrl_parse_dt(pdev, priv);
-	if (ret)
-		return ret;
-
-	pctl_dev = devm_pinctrl_register(&pdev->dev, ctrldesc, priv);
-	if (IS_ERR(pctl_dev)) {
-		dev_err(&pdev->dev, "could not register pinctrl driver\n");
-		return PTR_ERR(pctl_dev);
-	}
-
-	priv->range.name = "exynos5440-pctrl-gpio-range";
-	priv->range.id = 0;
-	priv->range.base = 0;
-	priv->range.npins = EXYNOS5440_MAX_PINS;
-	priv->range.gc = priv->gc;
-	pinctrl_add_gpio_range(pctl_dev, &priv->range);
-	return 0;
-}
-
-/* register the gpiolib interface with the gpiolib subsystem */
-static int exynos5440_gpiolib_register(struct platform_device *pdev,
-				struct exynos5440_pinctrl_priv_data *priv)
-{
-	struct gpio_chip *gc;
-	int ret;
-
-	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
-	if (!gc)
-		return -ENOMEM;
-
-	priv->gc = gc;
-	gc->base = 0;
-	gc->ngpio = EXYNOS5440_MAX_PINS;
-	gc->parent = &pdev->dev;
-	gc->set = exynos5440_gpio_set;
-	gc->get = exynos5440_gpio_get;
-	gc->direction_input = exynos5440_gpio_direction_input;
-	gc->direction_output = exynos5440_gpio_direction_output;
-	gc->to_irq = exynos5440_gpio_to_irq;
-	gc->label = "gpiolib-exynos5440";
-	gc->owner = THIS_MODULE;
-	ret = gpiochip_add_data(gc, priv);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register gpio_chip %s, error "
-					"code: %d\n", gc->label, ret);
-		return ret;
-	}
-
-	return 0;
-}
-
-/* unregister the gpiolib interface with the gpiolib subsystem */
-static int exynos5440_gpiolib_unregister(struct platform_device *pdev,
-				struct exynos5440_pinctrl_priv_data *priv)
-{
-	gpiochip_remove(priv->gc);
-	return 0;
-}
-
-static void exynos5440_gpio_irq_unmask(struct irq_data *irqd)
-{
-	struct exynos5440_pinctrl_priv_data *d;
-	unsigned long gpio_int;
-
-	d = irq_data_get_irq_chip_data(irqd);
-	gpio_int = readl(d->reg_base + GPIO_INT);
-	gpio_int |= 1 << irqd->hwirq;
-	writel(gpio_int, d->reg_base + GPIO_INT);
-}
-
-static void exynos5440_gpio_irq_mask(struct irq_data *irqd)
-{
-	struct exynos5440_pinctrl_priv_data *d;
-	unsigned long gpio_int;
-
-	d = irq_data_get_irq_chip_data(irqd);
-	gpio_int = readl(d->reg_base + GPIO_INT);
-	gpio_int &= ~(1 << irqd->hwirq);
-	writel(gpio_int, d->reg_base + GPIO_INT);
-}
-
-/* irq_chip for gpio interrupts */
-static struct irq_chip exynos5440_gpio_irq_chip = {
-	.name		= "exynos5440_gpio_irq_chip",
-	.irq_unmask	= exynos5440_gpio_irq_unmask,
-	.irq_mask	= exynos5440_gpio_irq_mask,
-};
-
-/* interrupt handler for GPIO interrupts 0..7 */
-static irqreturn_t exynos5440_gpio_irq(int irq, void *data)
-{
-	struct exynos5440_gpio_intr_data *intd = data;
-	struct exynos5440_pinctrl_priv_data *d = intd->priv;
-	int virq;
-
-	virq = irq_linear_revmap(d->irq_domain, intd->gpio_int);
-	if (!virq)
-		return IRQ_NONE;
-	generic_handle_irq(virq);
-	return IRQ_HANDLED;
-}
-
-static int exynos5440_gpio_irq_map(struct irq_domain *h, unsigned int virq,
-					irq_hw_number_t hw)
-{
-	struct exynos5440_pinctrl_priv_data *d = h->host_data;
-
-	irq_set_chip_data(virq, d);
-	irq_set_chip_and_handler(virq, &exynos5440_gpio_irq_chip,
-					handle_level_irq);
-	return 0;
-}
-
-/* irq domain callbacks for gpio interrupt controller */
-static const struct irq_domain_ops exynos5440_gpio_irqd_ops = {
-	.map	= exynos5440_gpio_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-/* setup handling of gpio interrupts */
-static int exynos5440_gpio_irq_init(struct platform_device *pdev,
-				struct exynos5440_pinctrl_priv_data *priv)
-{
-	struct device *dev = &pdev->dev;
-	struct exynos5440_gpio_intr_data *intd;
-	int i, irq, ret;
-
-	intd = devm_kzalloc(dev, sizeof(*intd) * EXYNOS5440_MAX_GPIO_INT,
-					GFP_KERNEL);
-	if (!intd)
-		return -ENOMEM;
-
-	for (i = 0; i < EXYNOS5440_MAX_GPIO_INT; i++) {
-		irq = irq_of_parse_and_map(dev->of_node, i);
-		if (irq <= 0) {
-			dev_err(dev, "irq parsing failed\n");
-			return -EINVAL;
-		}
-
-		intd->gpio_int = i;
-		intd->priv = priv;
-		ret = devm_request_irq(dev, irq, exynos5440_gpio_irq,
-					0, dev_name(dev), intd++);
-		if (ret) {
-			dev_err(dev, "irq request failed\n");
-			return -ENXIO;
-		}
-	}
-
-	priv->irq_domain = irq_domain_add_linear(dev->of_node,
-				EXYNOS5440_MAX_GPIO_INT,
-				&exynos5440_gpio_irqd_ops, priv);
-	if (!priv->irq_domain) {
-		dev_err(dev, "failed to create irq domain\n");
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-static int exynos5440_pinctrl_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct exynos5440_pinctrl_priv_data *priv;
-	struct resource *res;
-	int ret;
-
-	if (!dev->of_node) {
-		dev_err(dev, "device tree node not found\n");
-		return -ENODEV;
-	}
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->reg_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(priv->reg_base))
-		return PTR_ERR(priv->reg_base);
-
-	ret = exynos5440_gpiolib_register(pdev, priv);
-	if (ret)
-		return ret;
-
-	ret = exynos5440_pinctrl_register(pdev, priv);
-	if (ret) {
-		exynos5440_gpiolib_unregister(pdev, priv);
-		return ret;
-	}
-
-	ret = exynos5440_gpio_irq_init(pdev, priv);
-	if (ret) {
-		dev_err(dev, "failed to setup gpio interrupts\n");
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, priv);
-	dev_info(dev, "EXYNOS5440 pinctrl driver registered\n");
-	return 0;
-}
-
-static const struct of_device_id exynos5440_pinctrl_dt_match[] = {
-	{ .compatible = "samsung,exynos5440-pinctrl" },
-	{},
-};
-
-static struct platform_driver exynos5440_pinctrl_driver = {
-	.probe		= exynos5440_pinctrl_probe,
-	.driver = {
-		.name	= "exynos5440-pinctrl",
-		.of_match_table = exynos5440_pinctrl_dt_match,
-		.suppress_bind_attrs = true,
-	},
-};
-
-static int __init exynos5440_pinctrl_drv_register(void)
-{
-	return platform_driver_register(&exynos5440_pinctrl_driver);
-}
-postcore_initcall(exynos5440_pinctrl_drv_register);
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index de7df20..c86948e 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1354,15 +1354,6 @@ static struct s3c64xx_spi_port_config exynos4_spi_port_config = {
 	.clk_from_cmu	= true,
 };
 
-static struct s3c64xx_spi_port_config exynos5440_spi_port_config = {
-	.fifo_lvl_mask	= { 0x1ff },
-	.rx_lvl_offset	= 15,
-	.tx_st_done	= 25,
-	.high_speed	= true,
-	.clk_from_cmu	= true,
-	.quirks		= S3C64XX_SPI_QUIRK_POLL,
-};
-
 static struct s3c64xx_spi_port_config exynos7_spi_port_config = {
 	.fifo_lvl_mask	= { 0x1ff, 0x7F, 0x7F, 0x7F, 0x7F, 0x1ff},
 	.rx_lvl_offset	= 15,
@@ -1406,9 +1397,6 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = {
 	{ .compatible = "samsung,exynos4210-spi",
 			.data = (void *)&exynos4_spi_port_config,
 	},
-	{ .compatible = "samsung,exynos5440-spi",
-			.data = (void *)&exynos5440_spi_port_config,
-	},
 	{ .compatible = "samsung,exynos7-spi",
 			.data = (void *)&exynos7_spi_port_config,
 	},
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index ed805c7..4fc89ed 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -123,28 +123,6 @@
 
 #define EXYNOS5433_PD_DET_EN			1
 
-/*exynos5440 specific registers*/
-#define EXYNOS5440_TMU_S0_7_TRIM		0x000
-#define EXYNOS5440_TMU_S0_7_CTRL		0x020
-#define EXYNOS5440_TMU_S0_7_DEBUG		0x040
-#define EXYNOS5440_TMU_S0_7_TEMP		0x0f0
-#define EXYNOS5440_TMU_S0_7_TH0			0x110
-#define EXYNOS5440_TMU_S0_7_TH1			0x130
-#define EXYNOS5440_TMU_S0_7_TH2			0x150
-#define EXYNOS5440_TMU_S0_7_IRQEN		0x210
-#define EXYNOS5440_TMU_S0_7_IRQ			0x230
-/* exynos5440 common registers */
-#define EXYNOS5440_TMU_IRQ_STATUS		0x000
-#define EXYNOS5440_TMU_PMIN			0x004
-
-#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT	0
-#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT	1
-#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT	2
-#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT	3
-#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT	4
-#define EXYNOS5440_TMU_TH_RISE4_SHIFT		24
-#define EXYNOS5440_EFUSE_SWAP_OFFSET		8
-
 /* Exynos7 specific registers */
 #define EXYNOS7_THD_TEMP_RISE7_6		0x50
 #define EXYNOS7_THD_TEMP_FALL7_6		0x60
@@ -614,57 +592,6 @@ static int exynos5433_tmu_initialize(struct platform_device *pdev)
 	return ret;
 }
 
-static int exynos5440_tmu_initialize(struct platform_device *pdev)
-{
-	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
-	unsigned int trim_info = 0, con, rising_threshold;
-	int threshold_code;
-	int crit_temp = 0;
-
-	/*
-	 * For exynos5440 soc triminfo value is swapped between TMU0 and
-	 * TMU2, so the below logic is needed.
-	 */
-	switch (data->id) {
-	case 0:
-		trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET +
-				 EXYNOS5440_TMU_S0_7_TRIM);
-		break;
-	case 1:
-		trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
-		break;
-	case 2:
-		trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET +
-				  EXYNOS5440_TMU_S0_7_TRIM);
-	}
-	sanitize_temp_error(data, trim_info);
-
-	/* Write temperature code for rising and falling threshold */
-	rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0);
-	rising_threshold = get_th_reg(data, rising_threshold, false);
-	writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0);
-	writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1);
-
-	data->tmu_clear_irqs(data);
-
-	/* if last threshold limit is also present */
-	if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) {
-		threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
-		/* 5th level to be assigned in th2 reg */
-		rising_threshold =
-			threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
-		writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2);
-		con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL);
-		con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
-		writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
-	}
-	/* Clear the PMIN in the common TMU register */
-	if (!data->id)
-		writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
-
-	return 0;
-}
-
 static int exynos7_tmu_initialize(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
@@ -816,35 +743,6 @@ static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
 	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 }
 
-static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
-{
-	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
-	struct thermal_zone_device *tz = data->tzd;
-	unsigned int con, interrupt_en;
-
-	con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL));
-
-	if (on) {
-		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
-		interrupt_en =
-			(of_thermal_is_trip_valid(tz, 3)
-			 << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) |
-			(of_thermal_is_trip_valid(tz, 2)
-			 << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) |
-			(of_thermal_is_trip_valid(tz, 1)
-			 << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) |
-			(of_thermal_is_trip_valid(tz, 0)
-			 << EXYNOS5440_TMU_INTEN_RISE0_SHIFT);
-		interrupt_en |=
-			interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
-	} else {
-		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
-		interrupt_en = 0; /* Disable all interrupts */
-	}
-	writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN);
-	writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
-}
-
 static void exynos7_tmu_control(struct platform_device *pdev, bool on)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
@@ -911,10 +809,9 @@ static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
 	if (temp) {
 		temp /= MCELSIUS;
 
-		if (data->soc != SOC_ARCH_EXYNOS5440) {
-			val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
-			val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
-		}
+		val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
+		val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
+
 		if (data->soc == SOC_ARCH_EXYNOS7) {
 			val &= ~(EXYNOS7_EMUL_DATA_MASK <<
 				EXYNOS7_EMUL_DATA_SHIFT);
@@ -955,16 +852,6 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
 	writel(val, data->base + emul_con);
 }
 
-static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data,
-					 int temp)
-{
-	unsigned int val;
-
-	val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG);
-	val = get_emul_con_reg(data, val, temp);
-	writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG);
-}
-
 static int exynos_tmu_set_emulation(void *drv_data, int temp)
 {
 	struct exynos_tmu_data *data = drv_data;
@@ -987,7 +874,6 @@ static int exynos_tmu_set_emulation(void *drv_data, int temp)
 }
 #else
 #define exynos4412_tmu_set_emulation NULL
-#define exynos5440_tmu_set_emulation NULL
 static int exynos_tmu_set_emulation(void *drv_data, int temp)
 	{ return -EINVAL; }
 #endif /* CONFIG_THERMAL_EMULATION */
@@ -1005,11 +891,6 @@ static int exynos4412_tmu_read(struct exynos_tmu_data *data)
 	return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
 }
 
-static int exynos5440_tmu_read(struct exynos_tmu_data *data)
-{
-	return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP);
-}
-
 static int exynos7_tmu_read(struct exynos_tmu_data *data)
 {
 	return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
@@ -1020,16 +901,9 @@ static void exynos_tmu_work(struct work_struct *work)
 {
 	struct exynos_tmu_data *data = container_of(work,
 			struct exynos_tmu_data, irq_work);
-	unsigned int val_type;
 
 	if (!IS_ERR(data->clk_sec))
 		clk_enable(data->clk_sec);
-	/* Find which sensor generated this interrupt */
-	if (data->soc == SOC_ARCH_EXYNOS5440) {
-		val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS);
-		if (!((val_type >> data->id) & 0x1))
-			goto out;
-	}
 	if (!IS_ERR(data->clk_sec))
 		clk_disable(data->clk_sec);
 
@@ -1042,7 +916,7 @@ static void exynos_tmu_work(struct work_struct *work)
 
 	clk_disable(data->clk);
 	mutex_unlock(&data->lock);
-out:
+
 	enable_irq(data->irq);
 }
 
@@ -1071,21 +945,12 @@ static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
 	 * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
 	 * states that INTCLEAR register has a different placing of bits
 	 * responsible for FALL IRQs than INTSTAT register.  Exynos5420
-	 * and Exynos5440 documentation is correct (Exynos4210 doesn't
-	 * support FALL IRQs at all).
+	 * documentation is correct (Exynos4210 doesn't support FALL IRQs
+	 * at all).
 	 */
 	writel(val_irq, data->base + tmu_intclear);
 }
 
-static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data)
-{
-	unsigned int val_irq;
-
-	val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ);
-	/* clear the interrupts */
-	writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ);
-}
-
 static irqreturn_t exynos_tmu_irq(int irq, void *id)
 {
 	struct exynos_tmu_data *data = id;
@@ -1105,7 +970,6 @@ static const struct of_device_id exynos_tmu_match[] = {
 	{ .compatible = "samsung,exynos5420-tmu", },
 	{ .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
 	{ .compatible = "samsung,exynos5433-tmu", },
-	{ .compatible = "samsung,exynos5440-tmu", },
 	{ .compatible = "samsung,exynos7-tmu", },
 	{ /* sentinel */ },
 };
@@ -1130,8 +994,6 @@ static int exynos_of_get_soc_type(struct device_node *np)
 		return SOC_ARCH_EXYNOS5420_TRIMINFO;
 	else if (of_device_is_compatible(np, "samsung,exynos5433-tmu"))
 		return SOC_ARCH_EXYNOS5433;
-	else if (of_device_is_compatible(np, "samsung,exynos5440-tmu"))
-		return SOC_ARCH_EXYNOS5440;
 	else if (of_device_is_compatible(np, "samsung,exynos7-tmu"))
 		return SOC_ARCH_EXYNOS7;
 
@@ -1242,14 +1104,6 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
 		data->ntrip = 8;
 		break;
-	case SOC_ARCH_EXYNOS5440:
-		data->tmu_initialize = exynos5440_tmu_initialize;
-		data->tmu_control = exynos5440_tmu_control;
-		data->tmu_read = exynos5440_tmu_read;
-		data->tmu_set_emulation = exynos5440_tmu_set_emulation;
-		data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
-		data->ntrip = 4;
-		break;
 	case SOC_ARCH_EXYNOS7:
 		data->tmu_initialize = exynos7_tmu_initialize;
 		data->tmu_control = exynos7_tmu_control;
@@ -1267,8 +1121,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 	 * Check if the TMU shares some registers and then try to map the
 	 * memory of common registers.
 	 */
-	if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO &&
-	    data->soc != SOC_ARCH_EXYNOS5440)
+	if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
 		return 0;
 
 	if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 5149c2a..f3f830e 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -34,7 +34,6 @@ enum soc_type {
 	SOC_ARCH_EXYNOS5420,
 	SOC_ARCH_EXYNOS5420_TRIMINFO,
 	SOC_ARCH_EXYNOS5433,
-	SOC_ARCH_EXYNOS5440,
 	SOC_ARCH_EXYNOS7,
 };
 
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index d9145a8..8e3bab1 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -161,16 +161,10 @@ static int exynos_ehci_probe(struct platform_device *pdev)
 	}
 	exynos_ehci = to_exynos_ehci(hcd);
 
-	if (of_device_is_compatible(pdev->dev.of_node,
-					"samsung,exynos5440-ehci"))
-		goto skip_phy;
-
 	err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci);
 	if (err)
 		goto fail_clk;
 
-skip_phy:
-
 	exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
 
 	if (IS_ERR(exynos_ehci->clk)) {
@@ -304,7 +298,6 @@ static const struct dev_pm_ops exynos_ehci_pm_ops = {
 #ifdef CONFIG_OF
 static const struct of_device_id exynos_ehci_match[] = {
 	{ .compatible = "samsung,exynos4210-ehci" },
-	{ .compatible = "samsung,exynos5440-ehci" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, exynos_ehci_match);
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index a39fae4..c0c4dcc 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -130,15 +130,10 @@ static int exynos_ohci_probe(struct platform_device *pdev)
 
 	exynos_ohci = to_exynos_ohci(hcd);
 
-	if (of_device_is_compatible(pdev->dev.of_node,
-					"samsung,exynos5440-ohci"))
-		goto skip_phy;
-
 	err = exynos_ohci_get_phy(&pdev->dev, exynos_ohci);
 	if (err)
 		goto fail_clk;
 
-skip_phy:
 	exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
 
 	if (IS_ERR(exynos_ohci->clk)) {
@@ -270,7 +265,6 @@ static const struct dev_pm_ops exynos_ohci_pm_ops = {
 #ifdef CONFIG_OF
 static const struct of_device_id exynos_ohci_match[] = {
 	{ .compatible = "samsung,exynos4210-ohci" },
-	{ .compatible = "samsung,exynos5440-ohci" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, exynos_ohci_match);
diff --git a/include/dt-bindings/clock/exynos5440.h b/include/dt-bindings/clock/exynos5440.h
deleted file mode 100644
index 842cdc0..0000000
--- a/include/dt-bindings/clock/exynos5440.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Hajda <a.hajda@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Device Tree binding constants for Exynos5440 clock controller.
-*/
-
-#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5440_H
-#define _DT_BINDINGS_CLOCK_EXYNOS_5440_H
-
-#define CLK_XTAL		1
-#define CLK_ARM_CLK		2
-#define CLK_CPLLA		3
-#define CLK_CPLLB		4
-#define CLK_SPI_BAUD		16
-#define CLK_PB0_250		17
-#define CLK_PR0_250		18
-#define CLK_PR1_250		19
-#define CLK_B_250		20
-#define CLK_B_125		21
-#define CLK_B_200		22
-#define CLK_SATA		23
-#define CLK_USB			24
-#define CLK_GMAC0		25
-#define CLK_CS250		26
-#define CLK_PB0_250_O		27
-#define CLK_PR0_250_O		28
-#define CLK_PR1_250_O		29
-#define CLK_B_250_O		30
-#define CLK_B_125_O		31
-#define CLK_B_200_O		32
-#define CLK_SATA_O		33
-#define CLK_USB_O		34
-#define CLK_GMAC0_O		35
-#define CLK_CS250_O		36
-
-/* must be greater than maximal clock id */
-#define CLK_NR_CLKS		37
-
-#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5440_H */