blob: 524381249a2b80ad857369b691a29195232a29f0 [file] [log] [blame]
/*
* HiSilicon INNO USB2 PHY Driver.
*
* Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/reset.h>
#define INNO_PHY_PORT_NUM 2
#define REF_CLK_STABLE_TIME 100 /* unit:us */
#define UTMI_CLK_STABLE_TIME 200 /* unit:us */
#define TEST_CLK_STABLE_TIME 2 /* unit:ms */
#define PHY_CLK_STABLE_TIME 2 /* unit:ms */
#define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */
#define POR_RST_COMPLETE_TIME 300 /* unit:us */
#define PHY_TEST_DATA GENMASK(7, 0)
#define PHY_TEST_ADDR GENMASK(15, 8)
#define PHY_TEST_PORT GENMASK(18, 16)
#define PHY_TEST_WREN BIT(21)
#define PHY_TEST_CLK BIT(22) /* rising edge active */
#define PHY_TEST_RST BIT(23) /* low active */
#define PHY_CLK_ENABLE BIT(2)
struct hisi_inno_phy_port {
struct reset_control *utmi_rst;
struct hisi_inno_phy_priv *priv;
};
struct hisi_inno_phy_priv {
void __iomem *mmio;
struct clk *ref_clk;
struct reset_control *por_rst;
struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM];
};
static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv,
u8 port, u32 addr, u32 data)
{
void __iomem *reg = priv->mmio;
u32 val;
val = (data & PHY_TEST_DATA) |
((addr << 8) & PHY_TEST_ADDR) |
((port << 16) & PHY_TEST_PORT) |
PHY_TEST_WREN | PHY_TEST_RST;
writel(val, reg);
val |= PHY_TEST_CLK;
writel(val, reg);
val &= ~PHY_TEST_CLK;
writel(val, reg);
}
static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv)
{
/* The phy clk is controlled by the port0 register 0x06. */
hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE);
msleep(PHY_CLK_STABLE_TIME);
}
static int hisi_inno_phy_init(struct phy *phy)
{
struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
struct hisi_inno_phy_priv *priv = port->priv;
int ret;
ret = clk_prepare_enable(priv->ref_clk);
if (ret)
return ret;
udelay(REF_CLK_STABLE_TIME);
reset_control_deassert(priv->por_rst);
udelay(POR_RST_COMPLETE_TIME);
/* Set up phy registers */
hisi_inno_phy_setup(priv);
reset_control_deassert(port->utmi_rst);
udelay(UTMI_RST_COMPLETE_TIME);
return 0;
}
static int hisi_inno_phy_exit(struct phy *phy)
{
struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
struct hisi_inno_phy_priv *priv = port->priv;
reset_control_assert(port->utmi_rst);
reset_control_assert(priv->por_rst);
clk_disable_unprepare(priv->ref_clk);
return 0;
}
static const struct phy_ops hisi_inno_phy_ops = {
.init = hisi_inno_phy_init,
.exit = hisi_inno_phy_exit,
.owner = THIS_MODULE,
};
static int hisi_inno_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct hisi_inno_phy_priv *priv;
struct phy_provider *provider;
struct device_node *child;
struct resource *res;
int i = 0;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->mmio)) {
ret = PTR_ERR(priv->mmio);
return ret;
}
priv->ref_clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->ref_clk))
return PTR_ERR(priv->ref_clk);
priv->por_rst = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(priv->por_rst))
return PTR_ERR(priv->por_rst);
for_each_child_of_node(np, child) {
struct reset_control *rst;
struct phy *phy;
rst = of_reset_control_get_exclusive(child, NULL);
if (IS_ERR(rst))
return PTR_ERR(rst);
priv->ports[i].utmi_rst = rst;
priv->ports[i].priv = priv;
phy = devm_phy_create(dev, child, &hisi_inno_phy_ops);
if (IS_ERR(phy))
return PTR_ERR(phy);
phy_set_bus_width(phy, 8);
phy_set_drvdata(phy, &priv->ports[i]);
i++;
if (i > INNO_PHY_PORT_NUM) {
dev_warn(dev, "Support %d ports in maximum\n", i);
break;
}
}
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(provider);
}
static const struct of_device_id hisi_inno_phy_of_match[] = {
{ .compatible = "hisilicon,inno-usb2-phy", },
{ .compatible = "hisilicon,hi3798cv200-usb2-phy", },
{ },
};
MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match);
static struct platform_driver hisi_inno_phy_driver = {
.probe = hisi_inno_phy_probe,
.driver = {
.name = "hisi-inno-phy",
.of_match_table = hisi_inno_phy_of_match,
}
};
module_platform_driver(hisi_inno_phy_driver);
MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver");
MODULE_LICENSE("GPL v2");