blob: 0409714e8070e802352936321f4bfc27492dff62 [file] [log] [blame]
/*
* Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge
*
* Copyright 2007 IBM Corporation
*
* Stephen Winiecki <stevewin@us.ibm.com>
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
*
* Based on code from mpc7448_hpc2.c
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <linux/of_platform.h>
#include <linux/extable.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/tsi108.h>
#include <asm/pci-bridge.h>
#include <asm/reg.h>
#include <mm/mmu_decl.h>
#include <asm/tsi108_irq.h>
#include <asm/tsi108_pci.h>
#include <asm/mpic.h>
#undef DEBUG
#define HOLLY_PCI_CFG_PHYS 0x7c000000
int holly_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
static void holly_remap_bridge(void)
{
u32 lut_val, lut_addr;
int i;
printk(KERN_INFO "Remapping PCI bridge\n");
/* Re-init the PCI bridge and LUT registers to have mappings that don't
* rely on PIBS
*/
lut_addr = 0x900;
for (i = 0; i < 31; i++) {
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201);
lut_addr += 4;
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
lut_addr += 4;
}
/* Reserve the last LUT entry for PCI I/O space */
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241);
lut_addr += 4;
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
/* Map PCI I/O space */
tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0);
tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1);
/* Map PCI CFG space */
tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0);
tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01);
/* We don't need MEM32 and PRM remapping so disable them */
tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0);
tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0);
tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0);
/* Set P2O_BAR0 */
tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0);
tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000);
/* Init the PCI LUTs to do no remapping */
lut_addr = 0x500;
lut_val = 0x00000002;
for (i = 0; i < 32; i++) {
tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val);
lut_addr += 4;
tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000);
lut_addr += 4;
lut_val += 0x02000000;
}
tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900);
/* Set 64-bit PCI bus address for system memory */
tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0);
tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0);
}
static void __init holly_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("holly_setup_arch():set_bridge", 0);
tsi108_csr_vir_base = get_vir_csrbase();
/* setup PCI host bridge */
holly_remap_bridge();
np = of_find_node_by_type(NULL, "pci");
if (np)
tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1);
ppc_md.pci_exclude_device = holly_exclude_device;
if (ppc_md.progress)
ppc_md.progress("tsi108: resources set", 0x100);
printk(KERN_INFO "PPC750GX/CL Platform\n");
}
/*
* Interrupt setup and service. Interrupts on the holly come
* from the four external INT pins, PCI interrupts are routed via
* PCI interrupt control registers, it generates internal IRQ23
*
* Interrupt routing on the Holly Board:
* TSI108:PB_INT[0] -> CPU0:INT#
* TSI108:PB_INT[1] -> CPU0:MCP#
* TSI108:PB_INT[2] -> N/C
* TSI108:PB_INT[3] -> N/C
*/
static void __init holly_init_IRQ(void)
{
struct mpic *mpic;
#ifdef CONFIG_PCI
unsigned int cascade_pci_irq;
struct device_node *tsi_pci;
struct device_node *cascade_node = NULL;
#endif
mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
24, 0,
"Tsi108_PIC");
BUG_ON(mpic == NULL);
mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
mpic_init(mpic);
#ifdef CONFIG_PCI
tsi_pci = of_find_node_by_type(NULL, "pci");
if (tsi_pci == NULL) {
printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__);
return;
}
cascade_node = of_find_node_by_type(NULL, "pic-router");
if (cascade_node == NULL) {
printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__);
return;
}
cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq);
tsi108_pci_int_init(cascade_node);
irq_set_handler_data(cascade_pci_irq, mpic);
irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
#endif
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
}
void holly_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "vendor\t\t: IBM\n");
seq_printf(m, "machine\t\t: PPC750 GX/CL\n");
}
void __noreturn holly_restart(char *cmd)
{
__be32 __iomem *ocn_bar1 = NULL;
unsigned long bar;
struct device_node *bridge = NULL;
const void *prop;
int size;
phys_addr_t addr = 0xc0000000;
local_irq_disable();
bridge = of_find_node_by_type(NULL, "tsi-bridge");
if (bridge) {
prop = of_get_property(bridge, "reg", &size);
addr = of_translate_address(bridge, prop);
}
addr += (TSI108_PB_OFFSET + 0x414);
ocn_bar1 = ioremap(addr, 0x4);
/* Turn on the BOOT bit so the addresses are correctly
* routed to the HLP interface */
bar = ioread32be(ocn_bar1);
bar |= 2;
iowrite32be(bar, ocn_bar1);
iosync();
/* Set SRR0 to the reset vector and turn on MSR_IP */
mtspr(SPRN_SRR0, 0xfff00100);
mtspr(SPRN_SRR1, MSR_IP);
/* Do an rfi to jump back to firmware. Somewhat evil,
* but it works
*/
__asm__ __volatile__("rfi" : : : "memory");
/* Spin until reset happens. Shouldn't really get here */
for (;;) ;
}
void holly_power_off(void)
{
local_irq_disable();
/* No way to shut power off with software */
for (;;) ;
}
void holly_halt(void)
{
holly_power_off();
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init holly_probe(void)
{
if (!of_machine_is_compatible("ibm,holly"))
return 0;
return 1;
}
static int ppc750_machine_check_exception(struct pt_regs *regs)
{
const struct exception_table_entry *entry;
/* Are we prepared to handle this fault */
if ((entry = search_exception_tables(regs->nip)) != NULL) {
tsi108_clear_pci_cfg_error();
regs->msr |= MSR_RI;
regs->nip = extable_fixup(entry);
return 1;
}
return 0;
}
define_machine(holly){
.name = "PPC750 GX/CL TSI",
.probe = holly_probe,
.setup_arch = holly_setup_arch,
.init_IRQ = holly_init_IRQ,
.show_cpuinfo = holly_show_cpuinfo,
.get_irq = mpic_get_irq,
.restart = holly_restart,
.calibrate_decr = generic_calibrate_decr,
.machine_check_exception = ppc750_machine_check_exception,
.progress = udbg_progress,
};