diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
new file mode 100644
index 0000000..192ded4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,integrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Integrator Boards Device Tree Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  These were the first ARM platforms officially supported by ARM Ltd.
+  They are ARMv4, ARMv5 and ARMv6-capable using different core tiles,
+  so the system is modular and can host a variety of CPU tiles called
+  "core tiles" and referred to in the device tree as "core modules".
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: ARM Integrator Application Platform, this board has a PCI
+          host and several PCI slots, as well as a number of slots for logical
+          expansion modules, it is referred to as an "ASIC Development
+          Motherboard" and is extended with custom FPGA and is intended for
+          rapid prototyping. See ARM DUI 0098B. This board can physically come
+          pre-packaged in a PC Tower form factor called Integrator/PP1 or a
+          special metal fixture called Integrator/PP2, see ARM DUI 0169A.
+        items:
+          - const: arm,integrator-ap
+      - description: ARM Integrator Compact Platform (HBI-0086), this board has
+          a compact form factor and mainly consists of the bare minimum
+          peripherals to make use of the core module. See ARM DUI 0159B.
+        items:
+          - const: arm,integrator-cp
+      - description: ARM Integrator Standard Development Board (SDB) Platform,
+          this board is a PCI-based board conforming to the Microsoft SDB
+          (HARP) specification. See ARM DUI 0099A.
+        items:
+          - const: arm,integrator-sp
+
+  core-module@10000000:
+    type: object
+    description: the root node in the Integrator platforms must contain
+      a core module child node. They are always at physical address
+      0x10000000 in all the Integrator variants.
+    properties:
+      compatible:
+        items:
+          - const: arm,core-module-integrator
+          - const: syscon
+          - const: simple-mfd
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+patternProperties:
+  "^syscon@[0-9a-f]+$":
+    description: All Integrator boards must provide a system controller as a
+      node in the root of the device tree.
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+            - arm,integrator-ap-syscon
+            - arm,integrator-cp-syscon
+            - arm,integrator-sp-syscon
+          - const: syscon
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+
+required:
+  - compatible
+  - core-module@10000000
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml
new file mode 100644
index 0000000..d6e85d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,realview.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM RealView Boards Device Tree Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  The ARM RealView series of reference designs were built to explore the ARM
+  11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to
+  the earlier CPUs such as TrustZone and multicore (MPCore).
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: ARM RealView Emulation Baseboard (HBI-0140) was created
+          as a generic platform to test different FPGA designs, and has
+          pluggable CPU modules, see ARM DUI 0303E.
+        items:
+          - const: arm,realview-eb
+      - description: ARM RealView Platform Baseboard for ARM1176JZF-S
+          (HBI-0147) was created as a development board to test ARM TrustZone,
+          CoreSight and Intelligent Energy Management (IEM) see ARM DUI 0425F.
+        items:
+          - const: arm,realview-pb1176
+      - description: ARM RealView Platform Baseboard for ARM 11 MPCore
+          (HBI-0159, HBI-0175 and HBI-0176) was created to showcase
+          multiprocessing with ARM11 using MPCore using symmetric
+          multiprocessing (SMP). See ARM DUI 0351E.
+        items:
+          - const: arm,realview-pb11mp
+      - description: ARM RealView Platform Baseboard for Cortex-A8 (HBI-0178,
+          HBI-0176 and HBI-0175) was the first reference platform for the
+          Cortex CPU family, including a Cortex-A8 test chip.
+        items:
+          - const: arm,realview-pba8
+      - description: ARM RealView Platform Baseboard Explore for Cortex-A9
+          (HBI-0182 and HBI-0183) was the reference platform for the Cortex-A9
+          CPU.
+        items:
+          - const: arm,realview-pbx
+
+  soc:
+    description: All RealView boards must provide a soc node in the root of the
+      device tree, representing the System-on-Chip since these test chips are
+      rather complex.
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - items:
+            - const: arm,realview-eb-soc
+            - const: simple-bus
+          - items:
+            - const: arm,realview-pb1176-soc
+            - const: simple-bus
+          - items:
+            - const: arm,realview-pb11mp-soc
+            - const: simple-bus
+          - items:
+            - const: arm,realview-pba8-soc
+            - const: simple-bus
+          - items:
+            - const: arm,realview-pbx-soc
+            - const: simple-bus
+
+    patternProperties:
+      "^.*syscon@[0-9a-f]+$":
+        type: object
+        description: All RealView boards must provide a syscon system controller
+          node inside the soc node.
+        properties:
+          compatible:
+            oneOf:
+              - items:
+                - const: arm,realview-eb11mp-revb-syscon
+                - const: arm,realview-eb-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-eb11mp-revc-syscon
+                - const: arm,realview-eb-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-eb-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-pb1176-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-pb11mp-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-pba8-syscon
+                - const: syscon
+                - const: simple-mfd
+              - items:
+                - const: arm,realview-pbx-syscon
+                - const: syscon
+                - const: simple-mfd
+
+        required:
+          - compatible
+          - reg
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - soc
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
new file mode 100644
index 0000000..06efd2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Boards Device Tree Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  The ARM Versatile boards are two variants of ARM926EJ-S evaluation boards
+  with various pluggable interface boards, in essence the Versatile PB version
+  is a superset of the Versatile AB version.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: The ARM Versatile Application Baseboard (HBI-0118) is an
+          evaluation board specifically for the ARM926EJ-S. It can be connected
+          to an IB1 interface board for a touchscreen-type use case or an IB2
+          for a candybar phone-type use case. See ARM DUI 0225D.
+        items:
+          - const: arm,versatile-ab
+      - description: The ARM Versatile Platform Baseboard (HBI-0117) is an
+          extension of the Versatile Application Baseboard that includes a
+          PCI host controller. Like the sibling board, it is done specifically
+          for ARM926EJ-S. See ARM DUI 0224B.
+        items:
+          - const: arm,versatile-pb
+
+  core-module@10000000:
+    type: object
+    description: the root node in the Versatile platforms must contain
+      a core module child node. They are always at physical address
+      0x10000000 in all the Versatile variants.
+    properties:
+      compatible:
+        items:
+          - const: arm,core-module-versatile
+          - const: syscon
+          - const: simple-mfd
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+patternProperties:
+  "^syscon@[0-9a-f]+$":
+    type: object
+    description: When fitted with the IB2 Interface Board, the Versatile
+      AB will present an optional system controller node which controls the
+      extra peripherals on the interface board.
+    properties:
+      compatible:
+        contains:
+          const: arm,versatile-ib2-syscon
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - core-module@10000000
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
new file mode 100644
index 0000000..8c06a73
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,vexpress-juno.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express and Juno Boards Device Tree Bindings
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  ARM's Versatile Express platform were built as reference designs for exploring
+  multicore Cortex-A class systems. The Versatile Express family contains both
+  32 bit (Aarch32) and 64 bit (Aarch64) systems.
+
+  The board consist of a motherboard and one or more daughterboards (tiles). The
+  motherboard provides a set of peripherals. Processor and RAM "live" on the
+  tiles.
+
+  The motherboard and each core tile should be described by a separate Device
+  Tree source file, with the tile's description including the motherboard file
+  using an include directive. As the motherboard can be initialized in one of
+  two different configurations ("memory maps"), care must be taken to include
+  the correct one.
+
+  When a new generation of boards were introduced under the name "Juno", these
+  shared to many common characteristics with the Versatile Express that the
+  "arm,vexpress" compatible was retained in the root node, and these are
+  included in this binding schema as well.
+
+  The root node indicates the CPU SoC on the core tile, and this
+  is a daughterboard to the main motherboard. The name used in the compatible
+  string shall match the name given in the core tile's technical reference
+  manual, followed by "arm,vexpress" as an additional compatible value. If
+  further subvariants are released of the core tile, even more fine-granular
+  compatible strings with up to three compatible strings are used.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: CoreTile Express A9x4 (V2P-CA9) has 4 Cortex A9 CPU cores
+          in MPCore configuration in a test chip on the core tile. See ARM
+          DUI 0448I. This was the first Versatile Express platform.
+        items:
+          - const: arm,vexpress,v2p-ca9
+          - const: arm,vexpress
+      - description: CoreTile Express A5x2 (V2P-CA5s) has 2 Cortex A5 CPU cores
+          in a test chip on the core tile. It is intended to evaluate NEON, FPU
+          and Jazelle support in the Cortex A5 family. See ARM DUI 0541C.
+        items:
+          - const: arm,vexpress,v2p-ca5s
+          - const: arm,vexpress
+      - description: Coretile Express A15x2 (V2P-CA15) has 2 Cortex A15 CPU
+          cores in a MPCore configuration in a test chip on the core tile. See
+          ARM DUI 0604F.
+        items:
+          - const: arm,vexpress,v2p-ca15
+          - const: arm,vexpress
+      - description: CoreTile Express A15x4 (V2P-CA15, HBI-0237A) has 4 Cortex
+          A15 CPU cores in a test chip on the core tile. This is the first test
+          chip called "TC1".
+        items:
+          - const: arm,vexpress,v2p-ca15,tc1
+          - const: arm,vexpress,v2p-ca15
+          - const: arm,vexpress
+      - description: Coretile Express A15x2 A7x3 (V2P-CA15_A7) has 2 Cortex A15
+          CPU cores and 3 Cortex A7 cores in a big.LITTLE MPCore configuration
+          in a test chip on the core tile. See ARM DDI 0503I.
+        items:
+          - const: arm,vexpress,v2p-ca15_a7
+          - const: arm,vexpress
+      - description: LogicTile Express 20MG (V2F-1XV7) has 2 Cortex A53 CPU
+          cores in a test chip on the core tile. See ARM DDI 0498D.
+        items:
+          - const: arm,vexpress,v2f-1xv7,ca53x2
+          - const: arm,vexpress,v2f-1xv7
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno "r0" (the first Juno board,
+          V2M-Juno) was introduced as a vehicle for evaluating big.LITTLE on
+          AArch64 CPU cores. It has 2 Cortex A57 CPU cores and 4 Cortex A53
+          cores in a big.LITTLE configuration. It also features the MALI T624
+          GPU. See ARM document 100113_0000_07_en.
+        items:
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno r1 Development Platform
+          (V2M-Juno r1) was introduced mainly aimed at development of PCIe
+          based systems. Juno r1 also has support for AXI masters placed on
+          the TLX connectors to join the coherency domain. Otherwise it is the
+          same configuration as Juno r0. See ARM document 100122_0100_06_en.
+        items:
+          - const: arm,juno-r1
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno r2 Development Platform
+          (V2M-Juno r2). It has the same feature set as Juno r0 and r1. See
+          ARM document 100114_0200_04_en.
+        items:
+          - const: arm,juno-r2
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm AEMv8a Versatile Express Real-Time System Model
+          (VE RTSM) is a programmers view of the Versatile Express with Arm
+          v8A hardware. See ARM DUI 0575D.
+        items:
+          - const: arm,rtsm_ve,aemv8a
+          - const: arm,vexpress
+      - description: Arm FVP (Fixed Virtual Platform) base model revision C
+          See ARM Document 100964_1190_00_en.
+        items:
+          - const: arm,fvp-base-revc
+          - const: arm,vexpress
+      - description: Arm Foundation model for Aarch64
+        items:
+          - const: arm,foundation-aarch64
+          - const: arm,vexpress
+
+  arm,hbi:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: This indicates the ARM HBI (Hardware Board ID), this is
+      ARM's unique board model ID, visible on the PCB's silkscreen.
+
+  arm,vexpress,site:
+    description: As Versatile Express can be configured in number of physically
+      different setups, the device tree should describe platform topology.
+      For this reason the root node and main motherboard node must define this
+      property, describing the physical location of the children nodes.
+      0 means motherboard site, while 1 and 2 are daughterboard sites, and
+      0xf means "sisterboard" which is the site containing the main CPU tile.
+    allOf:
+      - $ref: '/schemas/types.yaml#/definitions/uint32'
+      - minimum: 0
+        maximum: 15
+
+  arm,vexpress,position:
+    description: When daughterboards are stacked on one site, their position
+      in the stack be be described this attribute.
+    allOf:
+      - $ref: '/schemas/types.yaml#/definitions/uint32'
+      - minimum: 0
+        maximum: 3
+
+  arm,vexpress,dcc:
+    description: When describing tiles consisting of more than one DCC, its
+      number can be specified with this attribute.
+    allOf:
+      - $ref: '/schemas/types.yaml#/definitions/uint32'
+      - minimum: 0
+        maximum: 3
+
+patternProperties:
+  "^bus@[0-9a-f]+$":
+    description: Static Memory Bus (SMB) node, if this exists it describes
+      the connection between the motherboard and any tiles. Sometimes the
+      compatible is placed directly under this node, sometimes it is placed
+      in a subnode named "motherboard". Sometimes the compatible includes
+      "arm,vexpress,v2?-p1" sometimes (on software models) is is just
+      "simple-bus". If the compatible is placed in the "motherboard" node,
+      it is stricter and always has two compatibles.
+    type: object
+    allOf:
+      - $ref: '/schemas/simple-bus.yaml'
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+            - enum:
+              - arm,vexpress,v2m-p1
+              - arm,vexpress,v2p-p1
+            - const: simple-bus
+          - const: simple-bus
+      motherboard:
+        type: object
+        description: The motherboard description provides a single "motherboard"
+          node using 2 address cells corresponding to the Static Memory Bus
+          used between the motherboard and the tile. The first cell defines the
+          Chip Select (CS) line number, the second cell address offset within
+          the CS. All interrupt lines between the motherboard and the tile
+          are active high and are described using single cell.
+        properties:
+          "#address-cells":
+            const: 2
+          "#size-cells":
+            const: 1
+          compatible:
+            items:
+              - enum:
+                - arm,vexpress,v2m-p1
+                - arm,vexpress,v2p-p1
+              - const: simple-bus
+          arm,v2m-memory-map:
+            description: This describes the memory map type.
+            allOf:
+              - $ref: '/schemas/types.yaml#/definitions/string'
+              - enum:
+                - rs1
+                - rs2
+        required:
+          - compatible
+    required:
+      - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - arm,vexpress,v2p-ca9
+              - arm,vexpress,v2p-ca5s
+              - arm,vexpress,v2p-ca15
+              - arm,vexpress,v2p-ca15_a7
+              - arm,vexpress,v2f-1xv7,ca53x2
+    then:
+      required:
+        - arm,hbi
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
deleted file mode 100644
index 96b1dad..0000000
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ /dev/null
@@ -1,237 +0,0 @@
-ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform)
------------------------------------------------------------------------------
-ARM's oldest Linux-supported platform with connectors for different core
-tiles of ARMv4, ARMv5 and ARMv6 type.
-
-Required properties (in root node):
-	compatible = "arm,integrator-ap";  /* Application Platform */
-	compatible = "arm,integrator-cp";  /* Compact Platform */
-
-FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
-
-Required nodes:
-
-- core-module: the root node to the Integrator platforms must have
-  a core-module with regs and the compatible string
-  "arm,core-module-integrator"
-- external-bus-interface: the root node to the Integrator platforms
-  must have an external bus interface with regs and the
-  compatible-string "arm,external-bus-interface"
-
-  Required properties for the core module:
-  - regs: the location and size of the core module registers, one
-    range of 0x200 bytes.
-
-- syscon: the root node of the Integrator platforms must have a
-  system controller node pointing to the control registers,
-  with the compatible string
-  "arm,integrator-ap-syscon"
-  "arm,integrator-cp-syscon"
-  respectively.
-
-  Required properties for the system controller:
-  - regs: the location and size of the system controller registers,
-    one range of 0x100 bytes.
-
-  Required properties for the AP system controller:
-  - interrupts: the AP syscon node must include the logical module
-    interrupts, stated in order of module instance <module 0>,
-    <module 1>, <module 2> ... for the CP system controller this
-    is not required not of any use.
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
-	model = "ARM Integrator/AP";
-	compatible = "arm,integrator-ap";
-
-	core-module@10000000 {
-		compatible = "arm,core-module-integrator";
-		reg = <0x10000000 0x200>;
-	};
-
-	ebi@12000000 {
-		compatible = "arm,external-bus-interface";
-		reg = <0x12000000 0x100>;
-	};
-
-	syscon {
-		compatible = "arm,integrator-ap-syscon";
-		reg = <0x11000000 0x100>;
-		interrupt-parent = <&pic>;
-		/* These are the logic module IRQs */
-		interrupts = <9>, <10>, <11>, <12>;
-	};
-};
-
-
-ARM Versatile Application and Platform Baseboards
--------------------------------------------------
-ARM's development hardware platform with connectors for customizable
-core tiles.  The hardware configuration of the Versatile boards is
-highly customizable.
-
-Required properties (in root node):
-	compatible = "arm,versatile-ab";  /* Application baseboard */
-	compatible = "arm,versatile-pb";  /* Platform baseboard */
-
-Interrupt controllers:
-- VIC required properties:
-	compatible = "arm,versatile-vic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-- SIC required properties:
-	compatible = "arm,versatile-sic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-Required nodes:
-
-- core-module: the root node to the Versatile platforms must have
-  a core-module with regs and the compatible strings
-  "arm,core-module-versatile", "syscon"
-
-Optional nodes:
-
-- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface
-  board mounted, this has a separate system controller that is
-  defined in this node.
-  Required properties:
-  compatible = "arm,versatile-ib2-syscon", "syscon"
-
-ARM RealView Boards
--------------------
-The RealView boards cover tailored evaluation boards that are used to explore
-the ARM11 and Cortex A-8 and Cortex A-9 processors.
-
-Required properties (in root node):
-	/* RealView Emulation Baseboard */
-	compatible = "arm,realview-eb";
-	 /* RealView Platform Baseboard for ARM1176JZF-S */
-	compatible = "arm,realview-pb1176";
-	/* RealView Platform Baseboard for ARM11 MPCore */
-	compatible = "arm,realview-pb11mp";
-	/* RealView Platform Baseboard for Cortex A-8 */
-	compatible = "arm,realview-pba8";
-	/* RealView Platform Baseboard Explore for Cortex A-9 */
-	compatible = "arm,realview-pbx";
-
-Required nodes:
-
-- soc: some node of the RealView platforms must be the SoC
-  node that contain the SoC-specific devices, with the compatible
-  string set to one of these tuples:
-   "arm,realview-eb-soc", "simple-bus"
-   "arm,realview-pb1176-soc", "simple-bus"
-   "arm,realview-pb11mp-soc", "simple-bus"
-   "arm,realview-pba8-soc", "simple-bus"
-   "arm,realview-pbx-soc", "simple-bus"
-
-- syscon: some subnode of the RealView SoC node must be a
-  system controller node pointing to the control registers,
-  with the compatible string set to one of these:
-   "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon"
-   "arm,realview-eb11mp-revc-syscon", "arm,realview-eb-syscon", "syscon"
-   "arm,realview-eb-syscon", "syscon"
-   "arm,realview-pb1176-syscon", "syscon"
-   "arm,realview-pb11mp-syscon", "syscon"
-   "arm,realview-pba8-syscon", "syscon"
-   "arm,realview-pbx-syscon", "syscon"
-
-  Required properties for the system controller:
-  - regs: the location and size of the system controller registers,
-    one range of 0x1000 bytes.
-
-Example:
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "ARM RealView PB1176 with device tree";
-	compatible = "arm,realview-pb1176";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,realview-pb1176-soc", "simple-bus";
-		ranges;
-
-		syscon: syscon@10000000 {
-			compatible = "arm,realview-syscon", "syscon";
-			reg = <0x10000000 0x1000>;
-		};
-
-	};
-};
-
-ARM Versatile Express Boards
------------------------------
-For details on the device tree bindings for ARM Versatile Express boards
-please consult the vexpress.txt file in the same directory as this file.
-
-ARM Juno Boards
-----------------
-The Juno boards are targeting development for AArch64 systems. The first
-iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64,
-with the second iteration, Juno r1, mainly aimed at development of PCIe
-based systems. Juno r1 also has support for AXI masters placed on the TLX
-connectors to join the coherency domain.
-
-Juno boards are described in a similar way to ARM Versatile Express boards,
-with the motherboard part of the hardware being described in a separate file
-to highlight the fact that is part of the support infrastructure for the SoC.
-Juno device tree bindings also share the Versatile Express bindings as
-described under the RS1 memory mapping.
-
-Required properties (in root node):
-	compatible = "arm,juno";	/* For Juno r0 board */
-	compatible = "arm,juno-r1";	/* For Juno r1 board */
-	compatible = "arm,juno-r2";	/* For Juno r2 board */
-
-Required nodes:
-The description for the board must include:
-   - a "psci" node describing the boot method used for the secondary CPUs.
-     A detailed description of the bindings used for "psci" nodes is present
-     in the psci.yaml file.
-   - a "cpus" node describing the available cores and their associated
-     "enable-method"s. For more details see cpus.yaml file.
-
-Example:
-
-/dts-v1/;
-/ {
-	model = "ARM Juno development board (r0)";
-	compatible = "arm,juno", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		A57_0: cpu@0 {
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x0>;
-			device_type = "cpu";
-			enable-method = "psci";
-		};
-
-		.....
-
-		A53_0: cpu@100 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x100>;
-			device_type = "cpu";
-			enable-method = "psci";
-		};
-
-		.....
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
deleted file mode 100644
index e3f9969..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
-  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
-  - enable-method = "brcm,bcm11351-cpu-method";
-  - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU.  The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			enable-method = "brcm,bcm11351-cpu-method";
-			secondary-boot-reg = <0x3500417c>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt
deleted file mode 100644
index 0ff6560..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Broadcom BCM11351 device tree bindings
--------------------------------------------
-
-Boards with the bcm281xx SoC family (which includes bcm11130, bcm11140,
-bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties:
-
-Required root node property:
-
-compatible = "brcm,bcm11351";
-DEPRECATED: compatible = "bcm,bcm11351";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
new file mode 100644
index 0000000..b5ef266
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM11351 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm28155-ap
+      - const: brcm,bcm11351
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt
deleted file mode 100644
index e077425..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom BCM21664 device tree bindings
---------------------------------------
-
-This document describes the device tree bindings for boards with the BCM21664
-SoC.
-
-Required root node property:
-  - compatible: brcm,bcm21664
-
-Example:
-	/ {
-		model = "BCM21664 SoC";
-		compatible = "brcm,bcm21664";
-		[...]
-	}
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
new file mode 100644
index 0000000..aafbd6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM21664 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm21664-garnet
+      - const: brcm,bcm21664
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
deleted file mode 100644
index a3af54c..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
-  BCM23550
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
-  - enable-method = "brcm,bcm23550";
-  - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU.  The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x3500417c>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt
deleted file mode 100644
index 080baad..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom BCM23550 device tree bindings
---------------------------------------
-
-This document describes the device tree bindings for boards with the BCM23550
-SoC.
-
-Required root node property:
-  - compatible: brcm,bcm23550
-
-Example:
-	/ {
-		model = "BCM23550 SoC";
-		compatible = "brcm,bcm23550";
-		[...]
-	}
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
new file mode 100644
index 0000000..c4b4efd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM23550 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm23550-sparrow
+      - const: brcm,bcm23550
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
deleted file mode 100644
index 8608a77..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom BCM4708 device tree bindings
--------------------------------------------
-
-Boards with the BCM4708 SoC shall have the following properties:
-
-Required root node property:
-
-bcm4708
-compatible = "brcm,bcm4708";
-
-bcm4709
-compatible = "brcm,bcm4709";
-
-bcm53012
-compatible = "brcm,bcm53012";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
new file mode 100644
index 0000000..d48313c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4708 device tree bindings
+
+description:
+  Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based
+  on the iProc architecture (Northstar).
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Hauke Mehrtens <hauke@hauke-m.de>
+  - Rafal Milecki <zajec5@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM4708 based boards
+        items:
+          - enum:
+              - asus,rt-ac56u
+              - asus,rt-ac68u
+              - buffalo,wzr-1750dhp
+              - linksys,ea6300-v1
+              - linksys,ea6500-v2
+              - luxul,xap-1510v1
+              - luxul,xwc-1000
+              - netgear,r6250v1
+              - netgear,r6300v2
+              - smartrg,sr400ac
+              - brcm,bcm94708
+          - const: brcm,bcm4708
+
+      - description: BCM47081 based boards
+        items:
+          - enum:
+              - asus,rt-n18u
+              - buffalo,wzr-600dhp2
+              - buffalo,wzr-900dhp
+              - luxul,xap-1410v1
+              - luxul,xwr-1200v1
+              - tplink,archer-c5-v2
+          - const: brcm,bcm47081
+          - const: brcm,bcm4708
+
+      - description: BCM4709 based boards
+        items:
+          - enum:
+              - asus,rt-ac87u
+              - buffalo,wxr-1900dhp
+              - linksys,ea9200
+              - netgear,r7000
+              - netgear,r8000
+              - tplink,archer-c9-v1
+              - brcm,bcm94709
+          - const: brcm,bcm4709
+          - const: brcm,bcm4708
+
+      - description: BCM47094 based boards
+        items:
+          - enum:
+              - dlink,dir-885l
+              - linksys,panamera
+              - luxul,abr-4500-v1
+              - luxul,xap-1610-v1
+              - luxul,xbr-4500-v1
+              - luxul,xwc-2000-v1
+              - luxul,xwr-3100v1
+              - luxul,xwr-3150-v1
+              - netgear,r8500
+              - phicomm,k3
+          - const: brcm,bcm47094
+          - const: brcm,bcm4708
+
+      - description: BCM53012 based boards
+        items:
+          - enum:
+              - brcm,bcm953012er
+              - brcm,bcm953012hr
+              - brcm,bcm953012k
+          - const: brcm,brcm53012
+          - const: brcm,bcm4708
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt
deleted file mode 100644
index 4c77169..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Broadcom Cygnus device tree bindings
-------------------------------------
-
-
-Boards with Cygnus SoCs shall have the following properties:
-
-Required root node property:
-
-BCM11300
-compatible = "brcm,bcm11300", "brcm,cygnus";
-
-BCM11320
-compatible = "brcm,bcm11320", "brcm,cygnus";
-
-BCM11350
-compatible = "brcm,bcm11350", "brcm,cygnus";
-
-BCM11360
-compatible = "brcm,bcm11360", "brcm,cygnus";
-
-BCM58300
-compatible = "brcm,bcm58300", "brcm,cygnus";
-
-BCM58302
-compatible = "brcm,bcm58302", "brcm,cygnus";
-
-BCM58303
-compatible = "brcm,bcm58303", "brcm,cygnus";
-
-BCM58305
-compatible = "brcm,bcm58305", "brcm,cygnus";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
new file mode 100644
index 0000000..fe111e72
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Cygnus device tree bindings
+
+maintainers:
+   - Ray Jui <rjui@broadcom.com>
+   - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm11300
+        - brcm,bcm11320
+        - brcm,bcm11350
+        - brcm,bcm11360
+        - brcm,bcm58300
+        - brcm,bcm58302
+        - brcm,bcm58303
+        - brcm,bcm58305
+      - const: brcm,cygnus
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
deleted file mode 100644
index a124c7f..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Broadcom Hurricane 2 device tree bindings
----------------------------------------
-
-Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
-are based on Broadcom's iProc SoC architecture and feature a single core Cortex
-A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND
-flash and a PCIe attached integrated switching engine.
-
-Boards with Hurricane SoCs shall have the following properties:
-
-Required root node property:
-
-BCM53342
-compatible = "brcm,bcm53342", "brcm,hr2";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
new file mode 100644
index 0000000..1158f49
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Hurricane 2 device tree bindings
+
+description:
+  Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
+  are based on Broadcom's iProc SoC architecture and feature a single core Cortex
+  A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND
+  flash and a PCIe attached integrated switching engine.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - ubnt,unifi-switch8
+      - const: brcm,bcm53342
+      - const: brcm,hr2
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt
deleted file mode 100644
index 35f056f..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Broadcom North Star 2 (NS2) device tree bindings
-------------------------------------------------
-
-Boards with NS2 shall have the following properties:
-
-Required root node property:
-
-NS2 SVK board
-compatible = "brcm,ns2-svk", "brcm,ns2";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
new file mode 100644
index 0000000..2451704
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom North Star 2 (NS2) device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,ns2-svk
+        - brcm,ns2-xmc
+      - const: brcm,ns2
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
deleted file mode 100644
index 677ef9d9..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom Northstar Plus SoC CPU Enable Method
----------------------------------------------
-This binding defines the enable method used for starting secondary
-CPU in the following Broadcom SoCs:
-  BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
-
-The enable method is specified by defining the following required
-properties in the corresponding secondary "cpu" device tree node:
-  - enable-method = "brcm,bcm-nsp-smp";
-  - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register which should hold the common
-entry point for a secondary CPU. This entry is cpu node specific
-and should be added per cpu. E.g., in case of NSP (BCM58625) which
-is a dual core CPU SoC, this entry should be added to cpu1 node.
-
-
-Example:
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			enable-method = "brcm,bcm-nsp-smp";
-			secondary-boot-reg = <0xffff042c>;
-			reg = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt
deleted file mode 100644
index eae53e4..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Broadcom Northstar Plus device tree bindings
---------------------------------------------
-
-Broadcom Northstar Plus family of SoCs are used for switching control
-and management applications as well as residential router/gateway
-applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
-several peripheral interfaces including multiple Gigabit Ethernet PHYs,
-DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
-SATA and several other IO controllers.
-
-Boards with Northstar Plus SoCs shall have the following properties:
-
-Required root node property:
-
-BCM58522
-compatible = "brcm,bcm58522", "brcm,nsp";
-
-BCM58525
-compatible = "brcm,bcm58525", "brcm,nsp";
-
-BCM58535
-compatible = "brcm,bcm58535", "brcm,nsp";
-
-BCM58622
-compatible = "brcm,bcm58622", "brcm,nsp";
-
-BCM58623
-compatible = "brcm,bcm58623", "brcm,nsp";
-
-BCM58625
-compatible = "brcm,bcm58625", "brcm,nsp";
-
-BCM88312
-compatible = "brcm,bcm88312", "brcm,nsp";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
new file mode 100644
index 0000000..fe364ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Plus device tree bindings
+
+description:
+  Broadcom Northstar Plus family of SoCs are used for switching control
+  and management applications as well as residential router/gateway
+  applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
+  several peripheral interfaces including multiple Gigabit Ethernet PHYs,
+  DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
+  SATA and several other IO controllers.
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm58522
+        - brcm,bcm58525
+        - brcm,bcm58535
+        - brcm,bcm58622
+        - brcm,bcm58623
+        - brcm,bcm58625
+        - brcm,bcm88312
+      - const: brcm,nsp
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
deleted file mode 100644
index 23a0217..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Broadcom Stingray device tree bindings
-------------------------------------------------
-
-Boards with Stingray shall have the following properties:
-
-Required root node property:
-
-Stingray Combo SVK board
-compatible = "brcm,bcm958742k", "brcm,stingray";
-
-Stingray SST100 board
-compatible = "brcm,bcm958742t", "brcm,stingray";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
new file mode 100644
index 0000000..4ad2b21
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Stingray device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,bcm958742k
+        - brcm,bcm958742t
+        - brcm,bcm958802a802x
+      - const: brcm,stingray
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt
deleted file mode 100644
index 223ed34..0000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Broadcom Vulcan device tree bindings
-------------------------------------
-
-Boards with Broadcom Vulcan shall have the following root property:
-
-Broadcom Vulcan Evaluation Board:
-  compatible = "brcm,vulcan-eval", "brcm,vulcan-soc";
-
-Generic Vulcan board:
-  compatible = "brcm,vulcan-soc";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
new file mode 100644
index 0000000..c5b6f31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Vulcan device tree bindings
+
+maintainers:
+  - Robert Richter <rrichter@marvell.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+        - brcm,vulcan-eval
+        - cavium,thunderx2-cn9900
+      - const: brcm,vulcan-soc
+
+...
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 7a9c3ce..644dfc5 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -287,6 +287,39 @@
       While optional, it is the preferred way to get access to
       the cpu-core power-domains.
 
+  secondary-boot-reg:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: |
+      Required for systems that have an "enable-method" property value of
+      "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
+
+      This includes the following SoCs: |
+      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
+      BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+      The secondary-boot-reg property is a u32 value that specifies the
+      physical address of the register used to request the ROM holding pen
+      code release a secondary CPU. The value written to the register is
+      formed by encoding the target CPU id into the low bits of the
+      physical start address it should jump to.
+
+if:
+  # If the enable-method property contains one of those values
+  properties:
+    enable-method:
+      contains:
+        enum:
+          - brcm,bcm11351-cpu-method
+          - brcm,bcm23550
+          - brcm,bcm-nsp-smp
+  # and if enable-method is present
+  required:
+    - enable-method
+
+then:
+   required:
+     - secondary-boot-reg
+
 required:
   - device_type
   - reg
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index a8e0b4a..bf9461d 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -119,6 +119,10 @@
               - fsl,imx6q-sabreauto
               - fsl,imx6q-sabrelite
               - fsl,imx6q-sabresd
+              - technexion,imx6q-pico-dwarf   # TechNexion i.MX6Q Pico-Dwarf
+              - technexion,imx6q-pico-hobbit  # TechNexion i.MX6Q Pico-Hobbit
+              - technexion,imx6q-pico-nymph   # TechNexion i.MX6Q Pico-Nymph
+              - technexion,imx6q-pico-pi      # TechNexion i.MX6Q Pico-Pi
               - technologic,imx6q-ts4900
               - technologic,imx6q-ts7970
               - toradex,apalis_imx6q            # Apalis iMX6 Module
@@ -166,6 +170,10 @@
               - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base
               - fsl,imx6dl-sabreauto      # i.MX6 DualLite/Solo SABRE Automotive Board
               - fsl,imx6dl-sabresd        # i.MX6 DualLite SABRE Smart Device Board
+              - technexion,imx6dl-pico-dwarf   # TechNexion i.MX6DL Pico-Dwarf
+              - technexion,imx6dl-pico-hobbit  # TechNexion i.MX6DL Pico-Hobbit
+              - technexion,imx6dl-pico-nymph   # TechNexion i.MX6DL Pico-Nymph
+              - technexion,imx6dl-pico-pi      # TechNexion i.MX6DL Pico-Pi
               - technologic,imx6dl-ts4900
               - technologic,imx6dl-ts7970
               - toradex,colibri_imx6dl          # Colibri iMX6 Module
@@ -225,6 +233,9 @@
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
               - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
               - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
+              - technexion,imx6ul-pico-dwarf   # TechNexion i.MX6UL Pico-Dwarf
+              - technexion,imx6ul-pico-hobbit  # TechNexion i.MX6UL Pico-Hobbit
+              - technexion,imx6ul-pico-pi      # TechNexion i.MX6UL Pico-Pi
           - const: fsl,imx6ul
 
       - description: Kontron N6310 S Board
@@ -274,6 +285,7 @@
         items:
           - enum:
               - toradex,colibri-imx7s           # Colibri iMX7 Solo Module
+              - toradex,colibri-imx7s-aster     # Colibri iMX7 Solo Module on Aster Carrier Board
               - toradex,colibri-imx7s-eval-v3   # Colibri iMX7 Solo Module on Colibri Evaluation Board V3
               - tq,imx7s-mba7             # i.MX7S TQ MBa7 with TQMa7S SoM
           - const: fsl,imx7s
@@ -284,8 +296,14 @@
               - fsl,imx7d-sdb             # i.MX7 SabreSD Board
               - fsl,imx7d-sdb-reva        # i.MX7 SabreSD Rev-A Board
               - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
+              - technexion,imx7d-pico-dwarf   # TechNexion i.MX7D Pico-Dwarf
+              - technexion,imx7d-pico-hobbit  # TechNexion i.MX7D Pico-Hobbit
+              - technexion,imx7d-pico-nymph   # TechNexion i.MX7D Pico-Nymph
+              - technexion,imx7d-pico-pi      # TechNexion i.MX7D Pico-Pi
               - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
+              - toradex,colibri-imx7d-aster             # Colibri iMX7 Dual Module on Aster Carrier Board
               - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
+              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board
               - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3
               - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on Colibri Evaluation Board V3
               - tq,imx7d-mba7             # i.MX7D TQ MBa7 with TQMa7D SoM
@@ -324,6 +342,12 @@
               - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
           - const: fsl,imx8mn
 
+      - description: i.MX8MP based Boards
+        items:
+          - enum:
+              - fsl,imx8mp-evk            # i.MX8MP EVK Board
+          - const: fsl,imx8mp
+
       - description: i.MX8MQ based Boards
         items:
           - enum:
@@ -395,6 +419,51 @@
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
+      - description: LS1028A based Boards
+        items:
+          - enum:
+              - fsl,ls1028a-qds
+              - fsl,ls1028a-rdb
+          - const: fsl,ls1028a
+
+      - description: Kontron KBox A-230-LS
+        items:
+          - const: kontron,kbox-a-230-ls
+          - const: kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+      - description:
+          Kontron SMARC-sAL28 board on the SMARC Eval Carrier 2.0
+        items:
+          - enum:
+              - kontron,sl28-var2-ads2
+              - kontron,sl28-var3-ads2
+              - kontron,sl28-var4-ads2
+          - enum:
+              - kontron,sl28-var2
+              - kontron,sl28-var3
+              - kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
+      - description:
+          Kontron SMARC-sAL28 board (on a generic/undefined carrier)
+        items:
+          - enum:
+              - kontron,sl28-var2
+              - kontron,sl28-var3
+              - kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
+      - description:
+          Kontron SMARC-sAL28 board (base). This is used in the base device
+          tree which is compatible with the overlays provided by the
+          vendor.
+        items:
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
       - description: LS1043A based Boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 9436124..611094d 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -208,6 +208,7 @@
       - description: R-Car M3-W+ (R8A77961)
         items:
           - enum:
+              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0))
               - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A)
           - const: renesas,r8a77961
 
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 874b0ea..715586d 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -402,6 +402,11 @@
           - const: phytec,rk3288-phycore-som
           - const: rockchip,rk3288
 
+      - description: Pine64 PinebookPro
+        items:
+          - const: pine64,pinebook-pro
+          - const: rockchip,rk3399
+
       - description: Pine64 Rock64
         items:
           - const: pine64,rock64
@@ -443,7 +448,7 @@
 
       - description: Rockchip Kylin
         items:
-          - const: rockchip,kylin-rk3036
+          - const: rockchip,rk3036-kylin
           - const: rockchip,rk3036
 
       - description: Rockchip PX3 Evaluation board
@@ -468,6 +473,11 @@
           - const: rockchip,r88
           - const: rockchip,rk3368
 
+      - description: Rockchip RK3036 Evaluation board
+        items:
+          - const: rockchip,rk3036-evb
+          - const: rockchip,rk3036
+
       - description: Rockchip RK3228 Evaluation board
         items:
           - const: rockchip,rk3228-evb
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 327ce67..abf2d97 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -394,6 +394,12 @@
           - const: linksprite,pcduino3-nano
           - const: allwinner,sun7i-a20
 
+      - description: Linutronix Testbox v2
+        items:
+          - const: linutronix,testbox-v2
+          - const: lamobo,lamobo-r1
+          - const: allwinner,sun7i-a20
+
       - description: HAOYU Electronics Marsboard A10
         items:
           - const: haoyu,a10-marsboard
@@ -636,6 +642,21 @@
           - const: pine64,pinebook
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PinePhone Developer Batch (1.0)
+        items:
+          - const: pine64,pinephone-1.0
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PinePhone Braveheart (1.1)
+        items:
+          - const: pine64,pinephone-1.1
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PineTab
+        items:
+          - const: pine64,pinetab
+          - const: allwinner,sun50i-a64
+
       - description: Pine64 SoPine Baseboard
         items:
           - const: pine64,sopine-baseboard
@@ -647,6 +668,11 @@
           - const: pineriver,mini-xplus
           - const: allwinner,sun4i-a10
 
+      - description: PocketBook Touch Lux 3
+        items:
+          - const: pocketbook,touch-lux-3
+          - const: allwinner,sun5i-a13
+
       - description: Point of View Protab2-IPS9
         items:
           - const: pov,protab2-ips9
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
index 9370e64..aa0738b4 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -30,6 +30,7 @@
     enum:
       - allwinner,sun5i-a13-mbus
       - allwinner,sun8i-h3-mbus
+      - allwinner,sun50i-a64-mbus
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
deleted file mode 100644
index cb12f33..0000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ /dev/null
@@ -1,300 +0,0 @@
-NVIDIA Tegra Power Management Controller (PMC)
-
-== Power Management Controller Node ==
-
-The PMC block interacts with an external Power Management Unit. The PMC
-mostly controls the entry and exit of the system from different sleep
-modes. It provides power-gating controllers for SoC and CPU power-islands.
-
-Required properties:
-- name : Should be pmc
-- compatible : Should contain one of the following:
-	For Tegra20 must contain "nvidia,tegra20-pmc".
-	For Tegra30 must contain "nvidia,tegra30-pmc".
-	For Tegra114 must contain "nvidia,tegra114-pmc"
-	For Tegra124 must contain "nvidia,tegra124-pmc"
-	For Tegra132 must contain "nvidia,tegra124-pmc"
-	For Tegra210 must contain "nvidia,tegra210-pmc"
-- reg : Offset and length of the register set for the device
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  "pclk" (The Tegra clock of that name),
-  "clk32k_in" (The 32KHz clock input to Tegra).
-
-Optional properties:
-- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
-  The PMU is an external Power Management Unit, whose interrupt output
-  signal is fed into the PMC. This signal is optionally inverted, and then
-  fed into the ARM GIC. The PMC is not involved in the detection or
-  handling of this interrupt signal, merely its inversion.
-- nvidia,suspend-mode : The suspend mode that the platform should use.
-  Valid values are 0, 1 and 2:
-  0 (LP0): CPU + Core voltage off and DRAM in self-refresh
-  1 (LP1): CPU voltage off and DRAM in self-refresh
-  2 (LP2): CPU voltage off
-- nvidia,core-power-req-active-high : Boolean, core power request active-high
-- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
-- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
-- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
-			   is enabled.
-
-Required properties when nvidia,suspend-mode is specified:
-- nvidia,cpu-pwr-good-time : CPU power good time in uS.
-- nvidia,cpu-pwr-off-time : CPU power off time in uS.
-- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
-			      Core power good time in uS.
-- nvidia,core-pwr-off-time : Core power off time in uS.
-
-Required properties when nvidia,suspend-mode=<0>:
-- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
-  The LP0 vector contains the warm boot code that is executed by AVP when
-  resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
-  processor and always being the first boot processor when chip is power on
-  or resume from deep sleep mode. When the system is resumed from the deep
-  sleep mode, the warm boot code will restore some PLLs, clocks and then
-  bring up CPU0 for resuming the system.
-
-Hardware-triggered thermal reset:
-On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists,
-hardware-triggered thermal reset will be enabled.
-
-Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are
-                             described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the
-                             Tegra K1 Technical Reference Manual.
-- nvidia,bus-addr : Bus address of the PMU on the I2C bus
-- nvidia,reg-addr : I2C register address to write poweroff command to
-- nvidia,reg-data : Poweroff command to write to PMU
-
-Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command.
-                     Defaults to 0. Valid values are described in section 12.5.2
-                     "Pinmux Support" of the Tegra4 Technical Reference Manual.
-
-Optional nodes:
-- powergates : This node contains a hierarchy of power domain nodes, which
-	       should match the powergates on the Tegra SoC. See "Powergate
-	       Nodes" below.
-
-Example:
-
-/ SoC dts including file
-pmc@7000f400 {
-	compatible = "nvidia,tegra20-pmc";
-	reg = <0x7000e400 0x400>;
-	clocks = <&tegra_car 110>, <&clk32k_in>;
-	clock-names = "pclk", "clk32k_in";
-	nvidia,invert-interrupt;
-	nvidia,suspend-mode = <1>;
-	nvidia,cpu-pwr-good-time = <2000>;
-	nvidia,cpu-pwr-off-time = <100>;
-	nvidia,core-pwr-good-time = <3845 3845>;
-	nvidia,core-pwr-off-time = <458>;
-	nvidia,core-power-req-active-high;
-	nvidia,sys-clock-req-active-high;
-	nvidia,lp0-vec = <0xbdffd000 0x2000>;
-};
-
-/ Tegra board dts file
-{
-	...
-	pmc@7000f400 {
-		i2c-thermtrip {
-			nvidia,i2c-controller-id = <4>;
-			nvidia,bus-addr = <0x40>;
-			nvidia,reg-addr = <0x36>;
-			nvidia,reg-data = <0x2>;
-		};
-	};
-	...
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-	...
-};
-
-
-== Powergate Nodes ==
-
-Each of the powergate nodes represents a power-domain on the Tegra SoC
-that can be power-gated by the Tegra PMC. The name of the powergate node
-should be one of the below. Note that not every powergate is applicable
-to all Tegra devices and the following list shows which powergates are
-applicable to which devices. Please refer to the Tegra TRM for more
-details on the various powergates.
-
- Name		Description			Devices Applicable
- 3d		3D Graphics			Tegra20/114/124/210
- 3d0		3D Graphics 0			Tegra30
- 3d1		3D Graphics 1			Tegra30
- aud		Audio				Tegra210
- dfd		Debug				Tegra210
- dis		Display A			Tegra114/124/210
- disb		Display B			Tegra114/124/210
- heg		2D Graphics			Tegra30/114/124/210
- iram		Internal RAM			Tegra124/210
- mpe		MPEG Encode			All
- nvdec		NVIDIA Video Decode Engine	Tegra210
- nvjpg		NVIDIA JPEG Engine		Tegra210
- pcie		PCIE				Tegra20/30/124/210
- sata		SATA				Tegra30/124/210
- sor		Display interfaces		Tegra124/210
- ve2		Video Encode Engine 2		Tegra210
- venc		Video Encode Engine		All
- vdec		Video Decode Engine		Tegra20/30/114/124
- vic		Video Imaging Compositor	Tegra124/210
- xusba		USB Partition A			Tegra114/124/210
- xusbb		USB Partition B 		Tegra114/124/210
- xusbc		USB Partition C			Tegra114/124/210
-
-Required properties:
-  - clocks: Must contain an entry for each clock required by the PMC for
-    controlling a power-gate. See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each reset required by the PMC for
-    controlling a power-gate. See ../reset/reset.txt for details.
-  - #power-domain-cells: Must be 0.
-
-Example:
-
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra210-pmc";
-		reg = <0x0 0x7000e400 0x0 0x400>;
-		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-
-		powergates {
-			pd_audio: aud {
-				clocks = <&tegra_car TEGRA210_CLK_APE>,
-					 <&tegra_car TEGRA210_CLK_APB2APE>;
-				resets = <&tegra_car 198>;
-				#power-domain-cells = <0>;
-			};
-		};
-	};
-
-
-== Powergate Clients ==
-
-Hardware blocks belonging to a power domain should contain a "power-domains"
-property that is a phandle pointing to the corresponding powergate node.
-
-Example:
-
-	adma: adma@702e2000 {
-		...
-		power-domains = <&pd_audio>;
-		...
-	};
-
-== Pad Control ==
-
-On Tegra SoCs a pad is a set of pins which are configured as a group.
-The pin grouping is a fixed attribute of the hardware. The PMC can be
-used to set pad power state and signaling voltage. A pad can be either
-in active or power down mode. The support for power state and signaling
-voltage configuration varies depending on the pad in question. 3.3 V and
-1.8 V signaling voltages are supported on pins where software
-controllable signaling voltage switching is available.
-
-The pad configuration state nodes are placed under the pmc node and they
-are referred to by the pinctrl client properties. For more information
-see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-The pad name should be used as the value of the pins property in pin
-configuration nodes.
-
-The following pads are present on Tegra124 and Tegra132:
-audio		bb		cam		comp
-csia		csb		cse		dsi
-dsib		dsic		dsid		hdmi
-hsic		hv		lvds		mipi-bias
-nand		pex-bias	pex-clk1	pex-clk2
-pex-cntrl	sdmmc1		sdmmc3		sdmmc4
-sys_ddc		uart		usb0		usb1
-usb2		usb_bias
-
-The following pads are present on Tegra210:
-audio		audio-hv	cam		csia
-csib		csic		csid		csie
-csif		dbg		debug-nonao	dmic
-dp		dsi		dsib		dsic
-dsid		emmc		emmc2		gpio
-hdmi		hsic		lvds		mipi-bias
-pex-bias	pex-clk1	pex-clk2	pex-cntrl
-sdmmc1		sdmmc3		spi		spi-hv
-uart		usb0		usb1		usb2
-usb3		usb-bias
-
-Required pin configuration properties:
-  - pins: Must contain name of the pad(s) to be configured.
-
-Optional pin configuration properties:
-  - low-power-enable: Configure the pad into power down mode
-  - low-power-disable: Configure the pad into active mode
-  - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
-    or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
-    The values are defined in
-    include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-
-Note: The power state can be configured on all of the Tegra124 and
-      Tegra132 pads. None of the Tegra124 or Tegra132 pads support
-      signaling voltage switching.
-
-Note: All of the listed Tegra210 pads except pex-cntrl support power
-      state configuration. Signaling voltage switching is supported on
-      following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
-      pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
-
-Pad configuration state example:
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra210-pmc";
-		reg = <0x0 0x7000e400 0x0 0x400>;
-		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-
-		...
-
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
-
-		sdmmc1_1v8: sdmmc1-1v8 {
-			pins = "sdmmc1";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
-
-		hdmi_off: hdmi-off {
-			pins = "hdmi";
-			low-power-enable;
-		}
-
-		hdmi_on: hdmi-on {
-			pins = "hdmi";
-			low-power-disable;
-		}
-	};
-
-Pinctrl client example:
-	sdmmc1: sdhci@700b0000 {
-		...
-		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-		pinctrl-0 = <&sdmmc1_3v3>;
-		pinctrl-1 = <&sdmmc1_1v8>;
-	};
-	...
-	sor@54540000 {
-		...
-		pinctrl-0 = <&hdmi_off>;
-		pinctrl-1 = <&hdmi_on>;
-		pinctrl-names = "hdmi-on", "hdmi-off";
-	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
new file mode 100644
index 0000000..f17bb35
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -0,0 +1,354 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra Power Management Controller (PMC)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-pmc
+      - nvidia,tegra20-pmc
+      - nvidia,tegra30-pmc
+      - nvidia,tegra114-pmc
+      - nvidia,tegra124-pmc
+      - nvidia,tegra210-pmc
+
+  reg:
+    maxItems: 1
+    description:
+      Offset and length of the register set for the device.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: clk32k_in
+    description:
+      Must includes entries pclk and clk32k_in.
+      pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
+      input to Tegra.
+
+  clocks:
+    maxItems: 2
+    description:
+      Must contain an entry for each entry in clock-names.
+      See ../clocks/clocks-bindings.txt for details.
+
+  '#clock-cells':
+    const: 1
+    description:
+      Tegra PMC has clk_out_1, clk_out_2, and clk_out_3.
+      PMC also has blink control which allows 32Khz clock output to
+      Tegra blink pad.
+      Consumer of PMC clock should specify the desired clock by having
+      the clock ID in its "clocks" phandle cell with pmc clock provider.
+      See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC
+      clock IDs.
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      Specifies number of cells needed to encode an interrupt source.
+      The value must be 2.
+
+  interrupt-controller: true
+
+  nvidia,invert-interrupt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Inverts the PMU interrupt signal.
+      The PMU is an external Power Management Unit, whose interrupt output
+      signal is fed into the PMC. This signal is optionally inverted, and
+      then fed into the ARM GIC. The PMC is not involved in the detection
+      or handling of this interrupt signal, merely its inversion.
+
+  nvidia,core-power-req-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Core power request active-high.
+
+  nvidia,sys-clock-req-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: System clock request active-high.
+
+  nvidia,combined-power-req:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: combined power request for CPU and Core.
+
+  nvidia,cpu-pwr-good-en:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      CPU power good signal from external PMIC to PMC is enabled.
+
+  nvidia,suspend-mode:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2]
+    description:
+      The suspend mode that the platform should use.
+      Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
+      Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
+      Mode 2 is for LP2, CPU voltage off
+
+  nvidia,cpu-pwr-good-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CPU power good time in uSec.
+
+  nvidia,cpu-pwr-off-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CPU power off time in uSec.
+
+  nvidia,core-pwr-good-time:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      <Oscillator-stable-time Power-stable-time>
+      Core power good time in uSec.
+
+  nvidia,core-pwr-off-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Core power off time in uSec.
+
+  nvidia,lp0-vec:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      <start length> Starting address and length of LP0 vector.
+      The LP0 vector contains the warm boot code that is executed
+      by AVP when resuming from the LP0 state.
+      The AVP (Audio-Video Processor) is an ARM7 processor and
+      always being the first boot processor when chip is power on
+      or resume from deep sleep mode. When the system is resumed
+      from the deep sleep mode, the warm boot code will restore
+      some PLLs, clocks and then brings up CPU0 for resuming the
+      system.
+
+  i2c-thermtrip:
+    type: object
+    description:
+      On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
+      hardware-triggered thermal reset will be enabled.
+
+    properties:
+      nvidia,i2c-controller-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          ID of I2C controller to send poweroff command to PMU.
+          Valid values are described in section 9.2.148
+          "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
+          Manual.
+
+      nvidia,bus-addr:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Bus address of the PMU on the I2C bus.
+
+      nvidia,reg-addr:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: PMU I2C register address to issue poweroff command.
+
+      nvidia,reg-data:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Poweroff command to write to PMU.
+
+      nvidia,pinmux-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Pinmux used by the hardware when issuing Poweroff command.
+          Defaults to 0. Valid values are described in section 12.5.2
+          "Pinmux Support" of the Tegra4 Technical Reference Manual.
+
+    required:
+      - nvidia,i2c-controller-id
+      - nvidia,bus-addr
+      - nvidia,reg-addr
+      - nvidia,reg-data
+
+    additionalProperties: false
+
+  powergates:
+    type: object
+    description: |
+      This node contains a hierarchy of power domain nodes, which should
+      match the powergates on the Tegra SoC. Each powergate node
+      represents a power-domain on the Tegra SoC that can be power-gated
+      by the Tegra PMC.
+      Hardware blocks belonging to a power domain should contain
+      "power-domains" property that is a phandle pointing to corresponding
+      powergate node.
+      The name of the powergate node should be one of the below. Note that
+      not every powergate is applicable to all Tegra devices and the following
+      list shows which powergates are applicable to which devices.
+      Please refer to Tegra TRM for mode details on the powergate nodes to
+      use for each power-gate block inside Tegra.
+      Name		Description			            Devices Applicable
+      3d		  3D Graphics			            Tegra20/114/124/210
+      3d0		  3D Graphics 0		            Tegra30
+      3d1		  3D Graphics 1		            Tegra30
+      aud		  Audio				                Tegra210
+      dfd		  Debug				                Tegra210
+      dis		  Display A			              Tegra114/124/210
+      disb		Display B			              Tegra114/124/210
+      heg		  2D Graphics		            	Tegra30/114/124/210
+      iram		Internal RAM		            Tegra124/210
+      mpe		  MPEG Encode			            All
+      nvdec		NVIDIA Video Decode Engine	Tegra210
+      nvjpg		NVIDIA JPEG Engine		      Tegra210
+      pcie		PCIE				                Tegra20/30/124/210
+      sata		SATA				                Tegra30/124/210
+      sor		  Display interfaces       		Tegra124/210
+      ve2		  Video Encode Engine 2		    Tegra210
+      venc		Video Encode Engine		      All
+      vdec		Video Decode Engine		      Tegra20/30/114/124
+      vic		  Video Imaging Compositor	  Tegra124/210
+      xusba		USB Partition A			        Tegra114/124/210
+      xusbb		USB Partition B 		        Tegra114/124/210
+      xusbc		USB Partition C			        Tegra114/124/210
+
+    patternProperties:
+      "^[a-z0-9]+$":
+        type: object
+
+        patternProperties:
+          clocks:
+            minItems: 1
+            maxItems: 8
+            description:
+              Must contain an entry for each clock required by the PMC
+              for controlling a power-gate.
+              See ../clocks/clock-bindings.txt document for more details.
+
+          resets:
+            minItems: 1
+            maxItems: 8
+            description:
+              Must contain an entry for each reset required by the PMC
+              for controlling a power-gate.
+              See ../reset/reset.txt for more details.
+
+          '#power-domain-cells':
+            const: 0
+            description: Must be 0.
+
+        required:
+          - clocks
+          - resets
+          - '#power-domain-cells'
+
+    additionalProperties: false
+
+patternProperties:
+  "^[a-f0-9]+-[a-f0-9]+$":
+    type: object
+    description:
+      This is a Pad configuration node. On Tegra SOCs a pad is a set of
+      pins which are configured as a group. The pin grouping is a fixed
+      attribute of the hardware. The PMC can be used to set pad power state
+      and signaling voltage. A pad can be either in active or power down mode.
+      The support for power state and signaling voltage configuration varies
+      depending on the pad in question. 3.3V and 1.8V signaling voltages
+      are supported on pins where software controllable signaling voltage
+      switching is available.
+
+      The pad configuration state nodes are placed under the pmc node and they
+      are referred to by the pinctrl client properties. For more information
+      see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+      The pad name should be used as the value of the pins property in pin
+      configuration nodes.
+
+      The following pads are present on Tegra124 and Tegra132
+      audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic,
+      hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl,
+      sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias.
+
+      The following pads are present on Tegra210
+      audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg,
+      debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi,
+      hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1,
+      sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias.
+
+    properties:
+      pins:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Must contain name of the pad(s) to be configured.
+
+      low-power-enable:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Configure the pad into power down mode.
+
+      low-power-disable:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Configure the pad into active mode.
+
+      power-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+          TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+          The values are defined in
+          include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+          Power state can be configured on all Tegra124 and Tegra132
+          pads. None of the Tegra124 or Tegra132 pads support signaling
+          voltage switching.
+          All of the listed Tegra210 pads except pex-cntrl support power
+          state configuration. Signaling voltage switching is supported
+          on below Tegra210 pads.
+          audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1,
+          sdmmc3, spi, spi-hv, and uart.
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - '#clock-cells'
+
+dependencies:
+  "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
+  "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
+  "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+    #include <dt-bindings/soc/tegra-pmc.h>
+
+    tegra_pmc: pmc@7000e400 {
+              compatible = "nvidia,tegra210-pmc";
+              reg = <0x0 0x7000e400 0x0 0x400>;
+              clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+              clock-names = "pclk", "clk32k_in";
+              #clock-cells = <1>;
+
+              nvidia,invert-interrupt;
+              nvidia,suspend-mode = <0>;
+              nvidia,cpu-pwr-good-time = <0>;
+              nvidia,cpu-pwr-off-time = <0>;
+              nvidia,core-pwr-good-time = <4587 3876>;
+              nvidia,core-pwr-off-time = <39065>;
+              nvidia,core-power-req-active-high;
+              nvidia,sys-clock-req-active-high;
+
+              powergates {
+                    pd_audio: aud {
+                            clocks = <&tegra_car TEGRA210_CLK_APE>,
+                                     <&tegra_car TEGRA210_CLK_APB2APE>;
+                            resets = <&tegra_car 198>;
+                            #power-domain-cells = <0>;
+                    };
+
+                    pd_xusbss: xusba {
+                            clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+                            resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+                            #power-domain-cells = <0>;
+                    };
+              };
+    };
diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt
deleted file mode 100644
index 39844cd..0000000
--- a/Documentation/devicetree/bindings/arm/vexpress.txt
+++ /dev/null
@@ -1,229 +0,0 @@
-ARM Versatile Express boards family
------------------------------------
-
-ARM's Versatile Express platform consists of a motherboard and one
-or more daughterboards (tiles). The motherboard provides a set of
-peripherals. Processor and RAM "live" on the tiles.
-
-The motherboard and each core tile should be described by a separate
-Device Tree source file, with the tile's description including
-the motherboard file using a /include/ directive. As the motherboard
-can be initialized in one of two different configurations ("memory
-maps"), care must be taken to include the correct one.
-
-
-Root node
----------
-
-Required properties in the root node:
-- compatible value:
-	compatible = "arm,vexpress,<model>", "arm,vexpress";
-  where <model> is the full tile model name (as used in the tile's
-    Technical Reference Manual), eg.:
-    - for Coretile Express A5x2 (V2P-CA5s):
-	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
-    - for Coretile Express A9x4 (V2P-CA9):
-	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
-  If a tile comes in several variants or can be used in more then one
-  configuration, the compatible value should be:
-	compatible = "arm,vexpress,<model>,<variant>", \
-				"arm,vexpress,<model>", "arm,vexpress";
-  eg:
-    - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
-	compatible = "arm,vexpress,v2p-ca15,tc1", \
-				"arm,vexpress,v2p-ca15", "arm,vexpress";
-    - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
-	compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
-				"arm,vexpress,v2f-2xv6", "arm,vexpress";
-
-Optional properties in the root node:
-- tile model name (use name from the tile's Technical Reference
-  Manual, eg. "V2P-CA5s")
-	model = "<model>";
-- tile's HBI number (unique ARM's board model ID, visible on the
-  PCB's silkscreen) in hexadecimal transcription:
-	arm,hbi = <0xhbi>
-  eg:
-  - for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
-	arm,hbi = <0x191>;
-  - Coretile Express A9x4 (V2P-CA9) HBI-0225:
-	arm,hbi = <0x225>;
-
-
-CPU nodes
----------
-
-Top-level standard "cpus" node is required. It must contain a node
-with device_type = "cpu" property for every available core, eg.:
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-		};
-	};
-
-
-Configuration infrastructure
-----------------------------
-
-The platform has an elaborated configuration system, consisting of
-microcontrollers residing on the mother- and daughterboards known
-as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
-The controllers are responsible for the platform initialization
-(reset generation, flash programming, FPGA bitfiles loading etc.)
-but also control clock generators, voltage regulators, gather
-environmental data like temperature, power consumption etc. Even
-the video output switch (FPGA) is controlled that way.
-
-The controllers are not mapped into normal memory address space
-and must be accessed through bridges - other devices capable
-of generating transactions on the configuration bus.
-
-The nodes describing configuration controllers must define
-the following properties:
-- compatible value:
-	compatible = "arm,vexpress,config-bus";
-- bridge phandle:
-	arm,vexpress,config-bridge = <phandle>;
-and children describing available functions.
-
-
-Platform topology
------------------
-
-As Versatile Express can be configured in number of physically
-different setups, the device tree should describe platform topology.
-Root node and main motherboard node must define the following
-property, describing physical location of the children nodes:
-- site number:
-	arm,vexpress,site = <number>;
-  where 0 means motherboard, 1 or 2 are daugtherboard sites,
-  0xf means "master" site (site containing main CPU tile)
-- when daughterboards are stacked on one site, their position
-  in the stack be be described with:
-	arm,vexpress,position = <number>;
-- when describing tiles consisting more than one DCC, its number
-  can be described with:
-	arm,vexpress,dcc = <number>;
-
-Any of the numbers above defaults to zero if not defined in
-the node or any of its parent.
-
-
-Motherboard
------------
-
-The motherboard description file provides a single "motherboard" node
-using 2 address cells corresponding to the Static Memory Bus used
-between the motherboard and the tile. The first cell defines the Chip
-Select (CS) line number, the second cell address offset within the CS.
-All interrupt lines between the motherboard and the tile are active
-high and are described using single cell.
-
-Optional properties of the "motherboard" node:
-- motherboard's memory map variant:
-	arm,v2m-memory-map = "<name>";
-  where name is one of:
-  - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
-            referred to as "ARM Cortex-A Series memory map":
-	arm,v2m-memory-map = "rs1";
-  When this property is missing, the motherboard is using the original
-  memory map (also known as the "Legacy memory map", primarily used
-  with the original CoreTile Express A9x4) with peripherals on CS7.
-
-Motherboard .dtsi files provide a set of labelled peripherals that
-can be used to obtain required phandle in the tile's "aliases" node:
-- UARTs, note that the numbers correspond to the physical connectors
-  on the motherboard's back panel:
-	v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
-- I2C controllers:
-	v2m_i2c_dvi and v2m_i2c_pcie
-- SP804 timers:
-	v2m_timer01 and v2m_timer23
-
-The tile description should define a "smb" node, describing the
-Static Memory Bus between the tile and motherboard. It must define
-the following properties:
-- "simple-bus" compatible value (to ensure creation of the children)
-	compatible = "simple-bus";
-- mapping of the SMB CS/offset addresses into main address space:
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <...>;
-- interrupts mapping:
-	#interrupt-cells = <1>;
-	interrupt-map-mask = <0 0 63>;
-	interrupt-map = <...>;
-
-
-Example of a VE tile description (simplified)
----------------------------------------------
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA5s";
-	arm,hbi = <0x225>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-		};
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x2c001000 0x1000>,
-		      <0x2c000100 0x100>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			compatible = "arm,vexpress-osc";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		/* CS0 is visible at 0x08000000 */
-		ranges = <0 0 0x08000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		/* Active high IRQ 0 is connected to GIC's SPI0 */
-		interrupt-map = <0 0 0 &gic 0 0 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
index 4e4d387..513499f 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
@@ -11,7 +11,7 @@
 
 Example:
 
-dcp@80028000 {
+dcp: crypto@80028000 {
 	compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 	reg = <0x80028000 0x2000>;
 	interrupts = <52 53>;
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
index e8a35c7..db690b1 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt
@@ -8,7 +8,7 @@
 
 Example:
 
-sah@10025000 {
+sah: crypto@10025000 {
 	compatible = "fsl,imx27-sahara";
 	reg = <	0x10025000 0x800>;
 	interrupts = <75>;
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 2fe245c..8f359f4 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -138,7 +138,7 @@
 
 iMX6UL does only require three clocks
 
-	crypto: caam@2140000 {
+	crypto: crypto@2140000 {
 		compatible = "fsl,sec-v4.0";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
index 2e40f70..8707df6 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
@@ -17,7 +17,11 @@
 
 properties:
   compatible:
-    const: allwinner,sun8i-h3-deinterlace
+    oneOf:
+      - const: allwinner,sun8i-h3-deinterlace
+      - items:
+        - const: allwinner,sun50i-a64-deinterlace
+        - const: allwinner,sun8i-h3-deinterlace
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
index b739f92..1f90eb3 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
@@ -118,7 +118,7 @@
 --------
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
index 9fb682e..38c5fa2 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -37,6 +37,7 @@
   - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
   - Tegra210: "nvidia,tegra210-xusb-padctl"
   - Tegra186: "nvidia,tegra186-xusb-padctl"
+  - Tegra194: "nvidia,tegra194-xusb-padctl"
 - reg: Physical base address and length of the controller's registers.
 - resets: Must contain an entry for each entry in reset-names.
 - reset-names: Must include the following entries:
@@ -62,6 +63,10 @@
 - vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
 - vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
 
+For Tegra194:
+- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
+  3.3 V.
+- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
 
 Pad nodes:
 ==========
@@ -154,6 +159,11 @@
 - sata: sata-0
   - functions: "usb3-ss", "sata"
 
+For Tegra194, the list of valid PHY nodes is given below:
+- usb2: usb2-0, usb2-1, usb2-2, usb2-3
+  - functions: "xusb"
+- usb3: usb3-0, usb3-1, usb3-2, usb3-3
+  - functions: "xusb"
 
 Port nodes:
 ===========
@@ -174,6 +184,12 @@
   - "device": for USB device mode
   - "otg": for USB OTG mode
 
+Required properties for OTG/Peripheral capable USB2 ports:
+- usb-role-switch: Boolean property to indicate that the port support OTG or
+  peripheral mode. If present, the port supports switching between USB host
+  and peripheral roles. Connector should be added as subnode.
+  See usb/usb-conn-gpio.txt.
+
 Optional properties:
 - nvidia,internal: A boolean property whose presence determines that a port
   is internal. In the absence of this property the port is considered to be
@@ -221,6 +237,11 @@
   is internal. In the absence of this property the port is considered to be
   external.
 
+- maximum-speed: Only for Tegra194. A string property that specifies maximum
+  supported speed of a usb3 port. Valid values are:
+  - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed.
+  - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only.
+
 For Tegra124 and Tegra132, the XUSB pad controller exposes the following
 ports:
 - 3x USB2: usb2-0, usb2-1, usb2-2
@@ -233,6 +254,9 @@
 - 2x HSIC: hsic-0, hsic-1
 - 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
 
+For Tegra194, the XUSB pad controller exposes the following ports:
+- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3
+- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
 
 Examples:
 =========
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index 0565dc4..243a6b1 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -18,9 +18,14 @@
   "#size-cells": true
 
   compatible:
-    enum:
-      - allwinner,sun6i-a31-spi
-      - allwinner,sun8i-h3-spi
+    oneOf:
+      - const: allwinner,sun6i-a31-spi
+      - const: allwinner,sun8i-h3-spi
+      - items:
+        - enum:
+          - allwinner,sun8i-r40-spi
+          - allwinner,sun50i-h6-spi
+        - const: allwinner,sun8i-h3-spi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
new file mode 100644
index 0000000..b84ed8ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC)
+
+description:
+  The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
+  USB 3.0 SuperSpeed protocols.
+
+maintainers:
+  - Nagarjuna Kristam <nkristam@nvidia.com>
+  - JC Kuo <jckuo@nvidia.com>
+  - Thierry Reding <treding@nvidia.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nvidia,tegra210-xudc # For Tegra210
+          - nvidia,tegra186-xudc # For Tegra186
+
+  reg:
+    minItems: 2
+    maxItems: 3
+    items:
+      - description: XUSB device controller registers
+      - description: XUSB device PCI Config registers
+      - description: XUSB device registers.
+
+  reg-names:
+    minItems: 2
+    maxItems: 3
+    items:
+      - const: base
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    maxItems: 1
+    description: Must contain the XUSB device interrupt.
+
+  clocks:
+    minItems: 4
+    maxItems: 5
+    items:
+      - description: Clock to enable core XUSB dev clock.
+      - description: Clock to enable XUSB super speed clock.
+      - description: Clock to enable XUSB super speed dev clock.
+      - description: Clock to enable XUSB high speed dev clock.
+      - description: Clock to enable XUSB full speed dev clock.
+
+  clock-names:
+    minItems: 4
+    maxItems: 5
+    items:
+     - const: dev
+     - const: ss
+     - const: ss_src
+     - const: fs_src
+     - const: hs_src
+
+  power-domains:
+    maxItems: 2
+    items:
+      - description: XUSBB(device) power-domain
+      - description: XUSBA(superspeed) power-domain
+
+  power-domain-names:
+    maxItems: 2
+    items:
+      - const: dev
+      - const: ss
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      phandle to the XUSB pad controller that is used to configure the USB pads
+      used by the XUDC controller.
+
+  phys:
+    minItems: 1
+    description:
+      Must contain an entry for each entry in phy-names.
+      See ../phy/phy-bindings.txt for details.
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: usb2-0
+      - const: usb2-1
+      - const: usb2-2
+      - const: usb2-3
+      - const: usb3-0
+      - const: usb3-1
+      - const: usb3-2
+      - const: usb3-3
+
+  avddio-usb-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - nvidia,xusb-padctl
+  - phys
+  - phy-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra210-xudc
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+        clocks:
+          minItems: 5
+        clock-names:
+          minItems: 5
+      required:
+        - avddio-usb-supply
+        - hvdd-usb-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-xudc
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@700d0000 {
+        compatible = "nvidia,tegra210-xudc";
+        reg = <0x0 0x700d0000 0x0 0x8000>,
+              <0x0 0x700d8000 0x0 0x1000>,
+              <0x0 0x700d9000 0x0 0x1000>;
+        reg-names = "base", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+        clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+
+        power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+        power-domain-names = "dev", "ss";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&micro_b>;
+        phy-names = "usb2-0";
+
+        avddio-usb-supply = <&vdd_pex_1v05>;
+        hvdd-usb-supply = <&vdd_3v3_sys>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 6158a14..1042a2f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1605,7 +1605,7 @@
 F:	Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
 
 ARM/CALXEDA HIGHBANK ARCHITECTURE
-M:	Rob Herring <robh@kernel.org>
+M:	Andre Przywara <andre.przywara@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-highbank/
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2..e8dd992 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -446,6 +446,10 @@
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-mira-rdk-nand.dtb \
 	imx6dl-phytec-pbab01.dtb \
+	imx6dl-pico-dwarf.dtb \
+	imx6dl-pico-hobbit.dtb \
+	imx6dl-pico-nymph.dtb \
+	imx6dl-pico-pi.dtb \
 	imx6dl-rex-basic.dtb \
 	imx6dl-riotboard.dtb \
 	imx6dl-sabreauto.dtb \
@@ -529,6 +533,10 @@
 	imx6q-phytec-mira-rdk-emmc.dtb \
 	imx6q-phytec-mira-rdk-nand.dtb \
 	imx6q-phytec-pbab01.dtb \
+	imx6q-pico-dwarf.dtb \
+	imx6q-pico-hobbit.dtb \
+	imx6q-pico-nymph.dtb \
+	imx6q-pico-pi.dtb \
 	imx6q-pistachio.dtb \
 	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \
@@ -594,6 +602,7 @@
 	imx6ul-kontron-n6310-s-43.dtb \
 	imx6ul-liteboard.dtb \
 	imx6ul-opos6uldev.dtb \
+	imx6ul-pico-dwarf.dtb \
 	imx6ul-pico-hobbit.dtb \
 	imx6ul-pico-pi.dtb \
 	imx6ul-phytec-segin-ff-rdk-nand.dtb \
@@ -610,12 +619,16 @@
 	imx6ulz-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
+	imx7d-colibri-aster.dtb \
+	imx7d-colibri-emmc-aster.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \
 	imx7d-colibri-eval-v3.dtb \
 	imx7d-mba7.dtb \
 	imx7d-meerkat96.dtb \
 	imx7d-nitrogen7.dtb \
+	imx7d-pico-dwarf.dtb \
 	imx7d-pico-hobbit.dtb \
+	imx7d-pico-nymph.dtb \
 	imx7d-pico-pi.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
@@ -623,6 +636,7 @@
 	imx7d-sdb-sht11.dtb \
 	imx7d-zii-rmu2.dtb \
 	imx7d-zii-rpu2.dtb \
+	imx7s-colibri-aster.dtb \
 	imx7s-colibri-eval-v3.dtb \
 	imx7s-mba7.dtb \
 	imx7s-warp.dtb
@@ -1016,6 +1030,7 @@
 	stm32h743i-disco.dtb \
 	stm32mp157a-avenger96.dtb \
 	stm32mp157a-dk1.dtb \
+	stm32mp157c-dhcom-pdk2.dtb \
 	stm32mp157c-dk2.dtb \
 	stm32mp157c-ed1.dtb \
 	stm32mp157c-ev1.dtb
@@ -1056,6 +1071,7 @@
 	sun5i-a13-licheepi-one.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
 	sun5i-a13-q8-tablet.dtb \
 	sun5i-a13-utoo-p66.dtb \
 	sun5i-gr8-chip-pro.dtb \
@@ -1086,6 +1102,7 @@
 	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-icnova-swac.dtb \
 	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olimex-som-evb.dtb \
@@ -1202,7 +1219,8 @@
 	ste-hrefv60plus-stuib.dtb \
 	ste-hrefv60plus-tvk.dtb \
 	ste-href520-tvk.dtb \
-	ste-ux500-samsung-golden.dtb
+	ste-ux500-samsung-golden.dtb \
+	ste-ux500-samsung-skomer.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld4-ref.dtb \
 	uniphier-ld6b-ref.dtb \
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 5b4dc957..a35f505 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -47,6 +47,7 @@ cpus {
 		#size-cells = <0>;
 		cpu@0 {
 			compatible = "arm,cortex-a8";
+			enable-method = "ti,am3352";
 			device_type = "cpu";
 			reg = <0>;
 
@@ -56,6 +57,17 @@ cpu@0 {
 			clock-names = "cpu";
 
 			clock-latency = <300000>; /* From omap-cpufreq driver */
+			cpu-idle-states = <&mpu_gate>;
+		};
+
+		idle-states {
+			mpu_gate: mpu_gate {
+				compatible = "arm,idle-state";
+				entry-latency-us = <40>;
+				exit-latency-us = <90>;
+				min-residency-us = <300>;
+				ti,idle-wkup-m3;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index f9eb654..dba87bf 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -45,6 +45,7 @@ cpus {
 		#size-cells = <0>;
 		cpu: cpu@0 {
 			compatible = "arm,cortex-a9";
+			enable-method = "ti,am4372";
 			device_type = "cpu";
 			reg = <0>;
 
@@ -54,6 +55,17 @@ cpu: cpu@0 {
 			operating-points-v2 = <&cpu0_opp_table>;
 
 			clock-latency = <300000>; /* From omap-cpufreq driver */
+			cpu-idle-states = <&mpu_gate>;
+		};
+
+		idle-states {
+			mpu_gate: mpu_gate {
+				compatible = "arm,idle-state";
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <300>;
+				local-timer-stop;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 09f3f54..f61bd59 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -210,7 +210,7 @@ vga_con_in: endpoint {
 		};
 	};
 
-	soc: soc@0 {
+	soc: soc {
 		compatible = "arm,realview-pbx-soc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
index df0f0cc..bea920b 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -17,7 +17,7 @@ backlight: backlight {
 	};
 
 	panel: panel {
-		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel";
+		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92";
 		backlight = <&backlight>;
 		power-supply = <&vcc_lcd_reg>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 9f30132..b484745 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -645,3 +645,8 @@ &pioD 15 GPIO_ACTIVE_HIGH
 &usb2 {
 	status = "okay";
 };
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 0b9fa29..6b84612 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -186,6 +186,11 @@ pinctrl_usb_default: usb_default {
 		pinmux = <PIN_PA10__GPIO>;
 		bias-disable;
 	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PA16__GPIO>;
+		bias-disable;
+	};
 };
 
 &pwm0 {
@@ -248,6 +253,13 @@ &uart3 {
 	status = "okay";
 };
 
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
 &usb1 {
 	num-ports = <3>;
 	atmel,vbus-gpio = <0
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index ba7f3e6..1c24ac8 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -180,8 +180,11 @@ uart2: serial@f8024000 {
 
 			i2c0: i2c@f8028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -198,8 +201,11 @@ i2c2: i2c@600 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
-					pinctrl-names = "default";
+					pinctrl-names = "default", "gpio";
 					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_flx0_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>;
 					atmel,fifo-size = <16>;
 					status = "okay";
 				};
@@ -226,8 +232,11 @@ spi1: spi@fc000000 {
 
 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 
 				at24@50 {
@@ -244,18 +253,36 @@ pinctrl_flx0_default: flx0_default {
 					bias-disable;
 				};
 
+				pinctrl_flx0_gpio: flx0_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2c0_default: i2c0_default {
 					pinmux = <PIN_PD21__TWD0>,
 						 <PIN_PD22__TWCK0>;
 					bias-disable;
 				};
 
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2c1_default: i2c1_default {
 					pinmux = <PIN_PC6__TWD1>,
 						 <PIN_PC7__TWCK1>;
 					bias-disable;
 				};
 
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PC6__GPIO>,
+						 <PIN_PC7__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_key_gpio_default: key_gpio_default {
 					pinmux = <PIN_PA10__GPIO>;
 					bias-pull-up;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 9d0a7fb..055ee53 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -129,8 +129,11 @@ uart1: serial@f8020000 {
 
 			i2c0: i2c@f8028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
 				i2c-sda-hold-time-ns = <350>;
 				status = "okay";
 
@@ -331,8 +334,11 @@ i2c2: i2c@600 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
-					pinctrl-names = "default";
+					pinctrl-names = "default", "gpio";
 					pinctrl-0 = <&pinctrl_flx4_default>;
+					pinctrl-1 = <&pinctrl_flx4_gpio>;
+					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
 					atmel,fifo-size = <16>;
 					i2c-analog-filter;
 					i2c-digital-filter;
@@ -343,11 +349,14 @@ i2c2: i2c@600 {
 
 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
 				i2c-analog-filter;
 				i2c-digital-filter;
 				i2c-digital-filter-width-ns = <35>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 
 				at24@54 {
@@ -441,18 +450,36 @@ pinctrl_flx4_default: flx4_default {
 					bias-disable;
 				};
 
+				pinctrl_flx4_gpio: flx4_gpio {
+					pinmux = <PIN_PD12__GPIO>,
+						 <PIN_PD13__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2c0_default: i2c0_default {
 					pinmux = <PIN_PD21__TWD0>,
 						 <PIN_PD22__TWCK0>;
 					bias-disable;
 				};
 
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2c1_default: i2c1_default {
 					pinmux = <PIN_PD4__TWD1>,
 						 <PIN_PD5__TWCK1>;
 					bias-disable;
 				};
 
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PD4__GPIO>,
+						 <PIN_PD5__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2s0_default: i2s0_default {
 					pinmux = <PIN_PC1__I2SC0_CK>,
 						 <PIN_PC2__I2SC0_MCK>,
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
index af49694..4d7cee5 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -136,7 +136,7 @@ user3 {
 
 	panel: panel {
 		/* Actually Ampire 800480R2 */
-		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+		compatible = "foxlink,fl500wvr00-a0t";
 		backlight = <&backlight>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index ea5cef0..d36e162 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -238,7 +238,7 @@ enter {
 	};
 
 	panel: panel {
-		compatible = "qiaodian,qd43003c0-40", "simple-panel";
+		compatible = "qiaodian,qd43003c0-40";
 		backlight = <&backlight>;
 		power-supply = <&panel_reg>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
index 7f00c1f..a927803 100644
--- a/arch/arm/boot/dts/at91sam9x5dm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -27,7 +27,7 @@ bl_reg: backlight_regulator {
 	};
 
 	panel: panel {
-		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+		compatible = "foxlink,fl500wvr00-a0t";
 		backlight = <&backlight>;
 		power-supply = <&panel_reg>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 1b5a835..e738de3 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -20,6 +20,7 @@ memory@0 {
 	};
 
 	aliases {
+		emmc2bus = &emmc2bus;
 		ethernet0 = &genet;
 	};
 
@@ -71,6 +72,79 @@ expgpio: gpio {
 	};
 };
 
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index d1e684d..a91cf68 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -241,17 +241,32 @@ pwm1: pwm@7e20c800 {
 			status = "disabled";
 		};
 
+		hvs@7e400000 {
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	/*
+	 * emmc2 has different DMA constraints based on SoC revisions. It was
+	 * moved into its own bus, so as for RPi4's firmware to update them.
+	 * The firmware will find whether the emmc2bus alias is defined, and if
+	 * so, it'll edit the dma-ranges property below accordingly.
+	 */
+	emmc2bus: emmc2bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
+		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
+
 		emmc2: emmc2@7e340000 {
 			compatible = "brcm,bcm2711-emmc2";
-			reg = <0x7e340000 0x100>;
+			reg = <0x0 0x7e340000 0x100>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
 			status = "disabled";
 		};
-
-		hvs@7e400000 {
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		};
 	};
 
 	arm-pmu {
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 5651ae6..f6eb715 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -13,7 +13,6 @@ / {
 	compatible = "calxeda,ecx-2000";
 	#address-cells = <2>;
 	#size-cells = <2>;
-	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -83,8 +82,7 @@ memory-controller@fff00000 {
 		intc: interrupt-controller@fff11000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
+			#address-cells = <0>;
 			interrupt-controller;
 			interrupts = <1 9 0xf04>;
 			reg = <0xfff11000 0x1000>,
@@ -95,7 +93,7 @@ intc: interrupt-controller@fff11000 {
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index 66ee1d3..57a028a 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -27,10 +27,11 @@ sata@ffe08000 {
 			reg = <0xffe08000 0x10000>;
 			interrupts = <0 83 4>;
 			dma-coherent;
-			calxeda,port-phys = <&combophy5 0 &combophy0 0
-					     &combophy0 1 &combophy0 2
-					     &combophy0 3>;
-			calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+			calxeda,port-phys = < &combophy5 0>, <&combophy0 0>,
+					     <&combophy0 1>, <&combophy0 2>,
+					     <&combophy0 3>;
+			calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>,
+					    <&gpioh 7 1>;
 			calxeda,led-order = <4 0 1 2 3>;
 		};
 
@@ -114,8 +115,8 @@ serial@fff36000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xfff36000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
+			clocks = <&pclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		smic@fff3a000 {
@@ -202,14 +203,14 @@ dma@fff3d000 {
 		ethernet@fff50000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4  0 78 4  0 79 4>;
+			interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
 			dma-coherent;
 		};
 
 		ethernet@fff51000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4  0 81 4  0 82 4>;
+			interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
 			dma-coherent;
 		};
 
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index dee35e3..b27a820 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -23,7 +23,7 @@ chosen {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x1ff00000>;
+		reg = <0x40000000 0x1f800000>;
 	};
 
 	firmware@205f000 {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index a1bdf78..9dda6bd 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -115,7 +115,7 @@ spi-lcd {
 		gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
 
 		lcd@0 {
 			compatible = "samsung,ld9040";
@@ -124,8 +124,6 @@ lcd@0 {
 			vci-supply = <&ldo17_reg>;
 			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 			spi-max-frequency = <1200000>;
-			spi-cpol;
-			spi-cpha;
 			power-on-delay = <10>;
 			reset-delay = <10>;
 			panel-width-mm = <90>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 9c39e82..73d6a71 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -165,6 +165,15 @@ &cpu0 {
 	cpu0-supply = <&buck2_reg>;
 };
 
+&cpu0_opp_table {
+	opp-1000000000 {
+		opp-suspend;
+	};
+	opp-800000000 {
+		/delete-property/opp-suspend;
+	};
+};
+
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index f8ebc62..6904091 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -93,22 +93,23 @@ main_dc_reg: regulator@0 {
 			compatible = "regulator-fixed";
 			reg = <0>;
 			regulator-name = "MAIN_DC";
+			regulator-always-on;
 		};
 
 		mmc_reg: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
-			regulator-name = "VDD_33ON_2.8V";
+			regulator-name = "VDD_MMC";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+			regulator-always-on;
 		};
 
 		reg_hdmi_en: regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "hdmi-en";
+			regulator-always-on;
 		};
 
 		vcc_1v2_reg: regulator@3 {
@@ -117,6 +118,7 @@ vcc_1v2_reg: regulator@3 {
 			regulator-name = "VCC_1V2";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
 		};
 
 		vcc_1v8_reg: regulator@4 {
@@ -125,6 +127,7 @@ vcc_1v8_reg: regulator@4 {
 			regulator-name = "VCC_1V8";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
 		};
 
 		vcc_3v3_reg: regulator@5 {
@@ -133,6 +136,7 @@ vcc_3v3_reg: regulator@5 {
 			regulator-name = "VCC_3V3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index ee28d30..e9a09dd 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -584,6 +584,7 @@ ldo27_reg: LDO27 {
 				regulator-name = "PVDD_G3DS_1V0";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
 
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -697,6 +698,7 @@ buck4_reg: BUCK4 {
 				regulator-name = "PVDD_G3D_1V0";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index 1b8605c..4b641b9 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -31,6 +31,7 @@ cpu0: cpu@100 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu1: cpu@101 {
@@ -43,6 +44,7 @@ cpu1: cpu@101 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu2: cpu@102 {
@@ -55,6 +57,7 @@ cpu2: cpu@102 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu3: cpu@103 {
@@ -67,6 +70,7 @@ cpu3: cpu@103 {
 			operating-points-v2 = <&cluster_a7_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
 		};
 
 		cpu4: cpu@0 {
@@ -79,6 +83,7 @@ cpu4: cpu@0 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 
 		cpu5: cpu@1 {
@@ -91,6 +96,7 @@ cpu5: cpu@1 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 
 		cpu6: cpu@2 {
@@ -103,6 +109,7 @@ cpu6: cpu@2 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 
 		cpu7: cpu@3 {
@@ -115,6 +122,7 @@ cpu7: cpu@3 {
 			operating-points-v2 = <&cluster_a15_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 5cf1aed..ab27ff8 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -901,6 +901,7 @@ buck4_reg: BUCK4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
 				regulator-boot-on;
+				regulator-always-on;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index f163206..8126592 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -215,6 +215,36 @@ map1 {
 				};
 			};
 		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu 0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
 	};
 
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 1865a70..5da2d81 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -357,6 +357,65 @@ cpu3_cooling_map4: map4 {
 				};
 			};
 		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu 0>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert2: gpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_alert3: gpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				gpu_alert4: gpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&gpu_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&gpu_alert3>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map4 {
+					trip = <&gpu_alert4>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index e2030ba..cc39289 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -119,13 +119,11 @@ led-orange-hd {
 
 	/*
 	 * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
-	 * Since the platform has no temperature sensor, this is controlled
-	 * from userspace by using the hard disks S.M.A.R.T. temperature
 	 * sensor. It is turned on when the temperature exceeds 46 degrees
 	 * and turned off when the temperatures goes below 41 degrees
 	 * (celsius).
 	 */
-	gpio-fan {
+	fan0: gpio-fan {
 		compatible = "gpio-fan";
 		/* Collides with IDE */
 		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
@@ -133,6 +131,40 @@ gpio-fan {
 		#cooling-cells = <2>;
 	};
 
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+			/*  Use the thermal sensor in the hard drive */
+			thermal-sensors = <&drive0>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				alert: chassis-alert {
+					/* At 43 degrees turn on the fan */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&alert>;
+					cooling-device = <&fan0 1 1>;
+				};
+			};
+		};
+	};
+
 	/*
 	 * The touchpad input is connected to a GPIO bit-banged
 	 * I2C bus.
@@ -443,8 +475,18 @@ ethernet-port@1 {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
+
+			/*
+			 * This drive may have a temperature sensor with a
+			 * thermal zone we can use for thermal control of the
+			 * chassis temperature using the fan.
+			 */
+			drive0: ide-port@0 {
+				reg = <0>;
+				#thermal-sensor-cells = <0>;
+			};
 		};
 
 		display-controller@6a000000 {
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 360642a..c6f3d90 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -297,7 +297,7 @@ ethernet-port@1 {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 521714f..43c45f7 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -170,11 +170,11 @@ ethernet-port@1 {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 
-		ata@63400000 {
+		ide@63400000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
index a98af03..a0916d3 100644
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -293,11 +293,11 @@ fixed-link {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 
-		ata@63400000 {
+		ide@63400000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 239dfac..0c6e6d3 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -289,7 +289,7 @@ fixed-link {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 8cf67b1..065ed10 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -356,7 +356,7 @@ gmac1: ethernet-port@1 {
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63000000 0x1000>;
 			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -365,9 +365,11 @@ ata@63000000 {
 			clock-names = "PCLK";
 			sata = <&sata>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		ata@63400000 {
+		ide@63400000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63400000 0x1000>;
 			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -376,6 +378,8 @@ ata@63400000 {
 			clock-names = "PCLK";
 			sata = <&sata>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		dma-controller@67000000 {
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index f4e4dca..b6b0225 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -13,7 +13,6 @@ / {
 	compatible = "calxeda,highbank";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -96,7 +95,7 @@ cpu@903 {
 		};
 	};
 
-	memory {
+	memory@0 {
 		name = "memory";
 		device_type = "memory";
 		reg = <0x00000000 0xff900000>;
@@ -128,14 +127,12 @@ watchdog@fff10620 {
 		intc: interrupt-controller@fff11000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
 			interrupt-controller;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0xfff12000 0x1000>;
 			interrupts = <0 70 4>;
@@ -145,14 +142,14 @@ L2: l2-cache {
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 
 
 		sregs@fff3c200 {
 			compatible = "calxeda,hb-sregs-l2-ecc";
 			reg = <0xfff3c200 0x100>;
-			interrupts = <0 71 4  0 72 4>;
+			interrupts = <0 71 4>, <0 72 4>;
 		};
 
 	};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 4c9aafe..0729e72 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -23,7 +23,7 @@ apbh@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
 				bus-width = <4>;
 				broken-cd;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 8257630..c5edff3 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -267,6 +267,14 @@ MX23_PAD_SSP1_SCK__SSP1_SCK
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				mmc1_4bit_pins_a: mmc1-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -422,7 +430,7 @@ dma_apbx: dma-apbx@80024000 {
 				clocks = <&clks 16>;
 			};
 
-			dcp@80028000 {
+			dcp: crypto@80028000 {
 				compatible = "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
 				interrupts = <53 54>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index f4516cc..111bfdc 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -82,6 +82,7 @@
 #define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x00 0x000
 #define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x04 0x000
 #define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x05 0x000
+#define MX25_PAD_EB0__CSPI3_SS0			0x040 0x258 0x4bc 0x06 0x000
 
 #define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x00 0x000
 #define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x04 0x000
@@ -102,11 +103,13 @@
 #define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
 #define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x03 0x000
 #define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x05 0x000
+#define MX25_PAD_CS4__CSPI3_MOSI		0x054 0x264 0x4b8 0x06 0x000
 
 #define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x00 0x000
 #define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
 #define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x03 0x000
 #define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x05 0x000
+#define MX25_PAD_CS5__CSPI3_MISO		0x058 0x268 0x4b4 0x06 0x000
 
 #define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x00 0x000
 #define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x05 0x000
@@ -114,6 +117,7 @@
 #define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x00 0x000
 #define MX25_PAD_ECB__UART5_TXD			0x060 0x270 0x000 0x03 0x000
 #define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x05 0x000
+#define MX25_PAD_ECB__CSPI3_SCLK		0x060 0x270 0x4ac 0x06 0x000
 
 #define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x00 0x000
 #define MX25_PAD_LBA__UART5_RXD			0x064 0x274 0x578 0x03 0x000
@@ -251,10 +255,12 @@
 
 #define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x00 0x000
 #define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
+#define MX25_PAD_LD12__KPP_ROW6			0x0f8 0x2f0 0x544 0x04 0x000
 #define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x05 0x001
 
 #define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x00 0x000
 #define MX25_PAD_LD13__CSPI2_MISO		0x0fc 0x2f4 0x49c 0x02 0x000
+#define MX25_PAD_LD13__KPP_ROW7			0x0fc 0x2f4 0x548 0x04 0x000
 #define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x05 0x000
 
 #define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x00 0x000
@@ -512,9 +518,11 @@
 
 #define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x00 0x000
 #define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x05 0x000
+#define MX25_PAD_FEC_TX_EN__KPP_ROW4		0x1d8 0x3d0 0x53c 0x06 0x000
 
 #define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x00 0x000
 #define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x05 0x000
+#define MX25_PAD_FEC_RDATA0__KPP_ROW5 		0x1dc 0x3d4 0x540 0x06 0x000
 
 #define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x00 0x000
 /*
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 40b95a2..1123e683 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -75,7 +75,7 @@ soc {
 		interrupt-parent = <&asic>;
 		ranges;
 
-		aips@43f00000 { /* AIPS1 */
+		bus@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -332,7 +332,7 @@ fec: ethernet@50038000 {
 			};
 		};
 
-		aips@53f00000 { /* AIPS2 */
+		bus@53f00000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index f3464cf..002cd22 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -525,7 +525,7 @@ usbmisc: usbmisc@10024600 {
 				reg = <0x10024600 0x200>;
 			};
 
-			sahara2: sahara@10025000 {
+			sahara2: crypto@10025000 {
 				compatible = "fsl,imx27-sahara";
 				reg = <0x10025000 0x1000>;
 				interrupts = <59>;
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 3a184d1..c5acc19 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -183,10 +183,20 @@ auart2: serial@8006e000 {
 				pinctrl-0 = <&auart2_2pins_a>;
 				status = "okay";
 			};
+
+			usbphy1: usbphy@8007e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&usb1_pins_a>;
+				status = "okay";
+			};
 		};
 	};
 
 	ahb@80080000 {
+		usb1: usb@80090000 {
+		      status = "okay";
+		};
+
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index e14d8ef..a1cbbeb 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -998,7 +998,7 @@ dma_apbx: dma-apbx@80024000 {
 				clocks = <&clks 26>;
 			};
 
-			dcp: dcp@80028000 {
+			dcp: crypto@80028000 {
 				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
 				interrupts = <52 53 54>;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 6b62f07..18270ec 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -63,7 +63,7 @@ iram: sram@1fffc000 {
 			ranges = <0 0x1fffc000 0x4000>;
 		};
 
-		aips@43f00000 { /* AIPS1 */
+		bus@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -225,7 +225,7 @@ iim: iim@5001c000 {
 			};
 		};
 
-		aips@53f00000 { /* AIPS2 */
+		bus@53f00000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 9cbdc1a..2ebf2c1 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -66,7 +66,7 @@ L2: l2-cache@30000000 {
 			cache-level = <2>;
 		};
 
-		aips1: aips@43f00000 {
+		aips1: bus@43f00000 {
 			compatible = "fsl,aips", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -199,7 +199,7 @@ fec: fec@50038000 {
 			};
 		};
 
-		aips2: aips@53f00000 {
+		aips2: bus@53f00000 {
 			compatible = "fsl,aips", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 0bfe7c9..d325658 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -101,7 +101,7 @@ soc {
 		interrupt-parent = <&tzic>;
 		ranges;
 
-		aips@50000000 { /* AIPS1 */
+		bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -389,7 +389,7 @@ uart4: serial@53ff0000 {
 			};
 		};
 
-		aips@60000000 {	/* AIPS2 */
+		bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 3596060..e559ab0 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -217,8 +217,8 @@ sound {
 		simple-audio-card,widgets =
 			"Headphone", "Headphone Jack";
 		simple-audio-card,routing =
-			"Headphone Jack", "HPLEFT",
-			"Headphone Jack", "HPRIGHT";
+			"Headphone Jack", "TPA6130A2 HPLEFT",
+			"Headphone Jack", "TPA6130A2 HPRIGHT";
 		simple-audio-card,aux-devs = <&hpa1>;
 
 		sound_cpu: simple-audio-card,cpu {
@@ -470,6 +470,7 @@ hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;
 		Vdd-supply = <&reg_3p3v>;
+		sound-name-prefix = "TPA6130A2";
 	};
 
 	ds1341: rtc@68 {
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index dea86b9..92fbb90 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -104,6 +104,11 @@ usbphy0: usbphy0 {
 		#phy-cells = <0>;
 	};
 
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
 	display-subsystem {
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu_di0>, <&ipu_di1>;
@@ -143,6 +148,14 @@ ipu: ipu@40000000 {
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
 			ipu_di0: port@2 {
 				reg = <2>;
 
@@ -158,7 +171,7 @@ ipu_di1_disp2: endpoint {
 			};
 		};
 
-		aips@70000000 { /* AIPS1 */
+		bus@70000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -440,7 +453,7 @@ clks: ccm@73fd4000{
 			};
 		};
 
-		aips@80000000 {	/* AIPS2 */
+		bus@80000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index ed341cf..8536f59 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -222,7 +222,7 @@ gpu: gpu@30000000 {
 			clock-names = "core_clk", "mem_iface_clk";
 		};
 
-		aips@50000000 { /* AIPS1 */
+		bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -654,7 +654,7 @@ uart4: serial@53ff0000 {
 			};
 		};
 
-		aips@60000000 {	/* AIPS2 */
+		bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index cd07562..d3de7c1 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2016 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
new file mode 100644
index 0000000..659a8e8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
new file mode 100644
index 0000000..d7403c5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/imx6dl-pico-nymph.dts
new file mode 100644
index 0000000..b282dbf
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/imx6dl-pico-pi.dts
new file mode 100644
index 0000000..b7b1c07
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 829654e..065d3ab 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -89,11 +89,25 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	phy-handle = <&rgmii_phy>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+		};
+	};
 };
 
 &gpio1 {
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 80ed5f1..2b9423d 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -562,6 +562,7 @@ &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
 	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
 	status = "disabled";
 };
 
@@ -569,6 +570,7 @@ &usbotg {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
 	srp-disable;
 	hnp-disable;
 	adp-disable;
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 008312e..77b65a4 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -44,6 +44,8 @@ cpu0: cpu@0 {
 			arm-supply = <&reg_arm>;
 			pu-supply = <&reg_pu>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 
 		cpu@1 {
@@ -85,8 +87,8 @@ ocram: sram@900000 {
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips1: aips-bus@2000000 {
-			iomuxc: iomuxc@20e0000 {
+		aips1: bus@2000000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6dl-iomuxc";
 			};
 
@@ -101,7 +103,7 @@ epdc: epdc@20f4000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			i2c4: i2c@21f8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index 4665e15..fab83ab 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2017 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index a3fa04a..1614b1a 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2017 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 5ba49d0..fa9f98d 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2017 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index 84b30bd..05ee28388 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -111,8 +111,22 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	phy-handle = <&rgmii_phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 61347a5..69f170f 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -107,7 +107,7 @@ heartbeat {
 	};
 
 	panel: panel {
-		compatible = "innolux,n133hse-ea1", "simple-panel";
+		compatible = "innolux,n133hse-ea1";
 		backlight = <&backlight>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/imx6q-pico-dwarf.dts
new file mode 100644
index 0000000..618d274
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/imx6q-pico-hobbit.dts
new file mode 100644
index 0000000..7a66650
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/imx6q-pico-nymph.dts
new file mode 100644
index 0000000..fe5a7be
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/imx6q-pico-pi.dts
new file mode 100644
index 0000000..9413f0a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and PI baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 9d3be1c..78a4d64 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -49,6 +49,8 @@ cpu0: cpu@0 {
 			arm-supply = <&reg_arm>;
 			pu-supply = <&reg_pu>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 
 		cpu1: cpu@1 {
@@ -164,7 +166,7 @@ ocram: sram@900000 {
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips-bus@2000000 { /* AIPS1 */
+		bus@2000000 { /* AIPS1 */
 			spba-bus@2000000 {
 				ecspi5: spi@2018000 {
 					#address-cells = <1>;
@@ -181,7 +183,7 @@ ecspi5: spi@2018000 {
 				};
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 1b5bc6b..8382f01af 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2017 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index d03dff2..6e3c6b4 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2016 Toradex AG
+ * Copyright 2014-2020 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 1a9a9d9..60563ff 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -313,6 +313,11 @@ touchscreen: egalax_ts@4 {
 		interrupts = <12 2>;
 		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
 };
 
 &ldb {
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 54b2bea..8942bec 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -304,6 +304,11 @@ touchscreen: egalax_ts@4 {
 		interrupts = <11 2>;
 		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
 };
 
 &ldb {
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 1b6c133..c40583d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -361,6 +361,11 @@ touchscreen: egalax_ts@4 {
 		interrupts = <12 2>;
 		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
 };
 
 &ldb {
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index a106689..ee85031 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -173,6 +173,25 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	ltc3676: pmic@3c {
 		compatible = "lltc,ltc3676";
 		reg = <0x3c>;
@@ -426,6 +445,12 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
 		>;
 	};
 
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+		>;
+	};
+
 	pinctrl_ipu1_csi0: ipu1csi0grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
@@ -449,6 +474,12 @@ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
 		>;
 	};
 
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
 	pinctrl_pcie: pciegrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index be1af74..30fe47f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -220,6 +220,14 @@ &uart2 {
 	status = "okay";
 };
 
+/* cc1352 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 /* Sterling-LWB Bluetooth */
 &uart4 {
 	pinctrl-names = "default";
@@ -411,6 +419,23 @@ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
 		>;
 	};
 
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x4001b0b1 /* DIO20 */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x4001b0b1 /* DIO14 */
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x4001b0b1 /* DIO15 */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1 /* TMS */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1 /* TCK */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1 /* TDO */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1 /* TDI */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x4001b0b1 /* RST# */
+		>;
+	};
+
 	pinctrl_uart4: uart4grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 978dc1c..a8ae654 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -88,7 +88,7 @@ eeprom@50 {
 		reg = <0x50>;
 	};
 
-	pmic@58 {
+	pmic: pmic@58 {
 		compatible = "dlg,da9062";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
@@ -96,6 +96,8 @@ pmic@58 {
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		gpio-controller;
+		#gpio-cells = <2>;
 
 		da9062_rtc: rtc {
 			compatible = "dlg,da9062-rtc";
@@ -107,6 +109,7 @@ da9062_onkey: onkey {
 
 		watchdog {
 			compatible = "dlg,da9062-watchdog";
+			dlg,use-sw-pm;
 		};
 
 		regulators {
diff --git a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
new file mode 100644
index 0000000..3a968782
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
new file mode 100644
index 0000000..144c472
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
new file mode 100644
index 0000000..3d56a42
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	adc@52 {
+		compatible = "ti,adc081c";
+		reg = <0x52>;
+		vref-supply = <&reg_2p5v>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+};
+
+&i2c3 {
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
new file mode 100644
index 0000000..b823dce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&hdmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi
new file mode 100644
index 0000000..39dfd90
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+
+	codec_osc: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-pico-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 50000 0>;
+		brightness-levels = <0 36 72 108 144 180 216 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&codec_osc>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		wakeup-source;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_reset>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {  /* Bluetooth module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi/BT  */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x4001b0b5 /* PICO_P24 */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x4001b0b5 /* PICO_P26 */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x4001b0b5 /* PICO_P28 */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x4001b0b5 /* PICO_P30 */
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x4001b0b5 /* PICO_P32 */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x4001b0b5 /* PICO_P34 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x4001b0b5 /* PICO_P42 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x4001b0b5 /* PICO_P44 */
+			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x4001b0b5 /* PICO_P48 */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000f0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x000f0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1f0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_ov5645: ov5645grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x0b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+		>;
+	};
+
+	pinctrl_pcie_reset: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x130b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lcd: reglcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x17071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17071
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
index 44a97ba..352ac58 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
@@ -153,6 +153,7 @@ &usdhc1 {
 	bus-width = <4>;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&pwrseq_ti_wifi>;
+	cap-power-off-card;
 	non-removable;
 	vmmc-supply = <&vcc_3v3>;
 	/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 0075637..20350e8 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -216,6 +216,13 @@ edp_refclk: edp-refclk {
 	};
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+	                         <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
 &cpu0 {
 	fsl,soc-operating-points = <
 		/* ARM kHz  SOC-PU uV */
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index e6b4b85..4798288 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -294,7 +294,7 @@ pcie: pcie@1ffc000 {
 			status = "disabled";
 		};
 
-		aips-bus@2000000 { /* AIPS1 */
+		bus@2000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -574,7 +574,7 @@ can2: flexcan@2094000 {
 				status = "disabled";
 			};
 
-			gpt: gpt@2098000 {
+			gpt: timer@2098000 {
 				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -661,7 +661,7 @@ gpio7: gpio@20b4000 {
 				#interrupt-cells = <2>;
 			};
 
-			kpp: kpp@20b8000 {
+			kpp: keypad@20b8000 {
 				compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -669,14 +669,14 @@ kpp: kpp@20b8000 {
 				status = "disabled";
 			};
 
-			wdog1: wdog@20bc000 {
+			wdog1: watchdog@20bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_IPG>;
 			};
 
-			wdog2: wdog@20c0000 {
+			wdog2: watchdog@20c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -684,7 +684,7 @@ wdog2: wdog@20c0000 {
 				status = "disabled";
 			};
 
-			clks: ccm@20c4000 {
+			clks: clock-controller@20c4000 {
 				compatible = "fsl,imx6q-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -908,7 +908,7 @@ mux: mux-controller {
 				};
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
 				reg = <0x20e0000 0x4000>;
 			};
@@ -935,14 +935,14 @@ sdma: sdma@20ec000 {
 			};
 		};
 
-		aips-bus@2100000 { /* AIPS2 */
+		bus@2100000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02100000 0x100000>;
 			ranges;
 
-			crypto: caam@2100000 {
+			crypto: crypto@2100000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -954,13 +954,13 @@ crypto: caam@2100000 {
 					 <&clks IMX6QDL_CLK_EIM_SLOW>;
 				clock-names = "mem", "aclk", "ipg", "emi_slow";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -1161,10 +1161,16 @@ weim: weim@21b8000 {
 				status = "disabled";
 			};
 
-			ocotp: ocotp@21bc000 {
+			ocotp: ocotp-ctrl@21bc000 {
 				compatible = "fsl,imx6q-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6QDL_CLK_IIM>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
 			};
 
 			tzasc@21d0000 { /* TZASC1 */
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 5f51f8e..93b89dc 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -18,7 +18,7 @@ ocram3: sram@960000 {
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips-bus@2100000 {
+		bus@2100000 {
 			pre1: pre@21c8000 {
 				compatible = "fsl,imx6qp-pre";
 				reg = <0x021c8000 0x1000>;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 59c54e6..8230b45 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -74,6 +74,8 @@ cpu@0 {
 			arm-supply = <&reg_arm>;
 			pu-supply = <&reg_pu>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 	};
 
@@ -143,7 +145,7 @@ L2: l2-cache@a02000 {
 			arm,data-latency = <4 2 3>;
 		};
 
-		aips1: aips-bus@2000000 {
+		aips1: bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -380,7 +382,7 @@ pwm4: pwm@208c000 {
 				clock-names = "ipg", "per";
 			};
 
-			gpt: gpt@2098000 {
+			gpt: timer@2098000 {
 				compatible = "fsl,imx6sl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -491,7 +493,7 @@ gpio5: gpio@20ac000 {
 					      <&iomuxc 21 161 1>;
 			};
 
-			kpp: kpp@20b8000 {
+			kpp: keypad@20b8000 {
 				compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -499,14 +501,14 @@ kpp: kpp@20b8000 {
 				status = "disabled";
 			};
 
-			wdog1: wdog@20bc000 {
+			wdog1: watchdog@20bc000 {
 				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_IPG>;
 			};
 
-			wdog2: wdog@20c0000 {
+			wdog2: watchdog@20c0000 {
 				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -514,7 +516,7 @@ wdog2: wdog@20c0000 {
 				status = "disabled";
 			};
 
-			clks: ccm@20c4000 {
+			clks: clock-controller@20c4000 {
 				compatible = "fsl,imx6sl-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -728,7 +730,7 @@ gpr: iomuxc-gpr@20e0000 {
 				reg = <0x020e0000 0x38>;
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6sl-iomuxc";
 				reg = <0x020e0000 0x4000>;
 			};
@@ -777,7 +779,7 @@ lcdif: lcdif@20f8000 {
 				power-domains = <&pd_disp>;
 			};
 
-			dcp: dcp@20fc000 {
+			dcp: crypto@20fc000 {
 				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
 				reg = <0x020fc000 0x4000>;
 				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
@@ -786,7 +788,7 @@ dcp: dcp@20fc000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -949,10 +951,16 @@ weim: weim@21b8000 {
 				status = "disabled";
 			};
 
-			ocotp: ocotp@21bc000 {
+			ocotp: ocotp-ctrl@21bc000 {
 				compatible = "fsl,imx6sl-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SL_CLK_OCOTP>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
 			};
 
 			audmux: audmux@21d8000 {
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index a1bc5bb3..edd3abb 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -72,6 +72,8 @@ cpu0: cpu@0 {
 				 <&clks IMX6SLL_CLK_PLL1_SYS>;
 			clock-names = "arm", "pll2_pfd2_396m", "step",
 				      "pll1_sw", "pll1_sys";
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 	};
 
@@ -144,7 +146,7 @@ L2: l2-cache@a02000 {
 			arm,data-latency = <4 2 3>;
 		};
 
-		aips1: aips-bus@2000000 {
+		aips1: bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -652,7 +654,7 @@ lcdif: lcd-controller@20f8000 {
 				status = "disabled";
 			};
 
-			dcp: dcp@20fc000 {
+			dcp: crypto@20fc000 {
 				compatible = "fsl,imx28-dcp";
 				reg = <0x020fc000 0x4000>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
@@ -663,7 +665,7 @@ dcp: dcp@20fc000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -791,6 +793,10 @@ ocotp: ocotp-ctrl@21bc000 {
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SLL_CLK_OCOTP>;
 
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
 				tempmon_calib: calib@38 {
 					reg = <0x38 4>;
 				};
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 832b5c5..d84ea69 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -484,31 +484,31 @@ MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22	0xb0b0
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX		0x1b0b1
 		>;
 	};
 
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	0x1b0b1
-			MX6SX_PAD_QSPI1B_SCLK__UART3_RX		0x1b0b1
+			MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX		0x1b0b1
+			MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX		0x1b0b1
 		>;
 	};
 
 	pinctrl_uart5: uart5grp {
 		fsl,pins = <
-			MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
-			MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
-			MX6SX_PAD_SD3_DATA6__UART3_RTS_B	0x1b0b1
-			MX6SX_PAD_SD3_DATA7__UART3_CTS_B	0x1b0b1
+			MX6SX_PAD_KEY_COL3__UART5_DCE_TX		0x1b0b1
+			MX6SX_PAD_KEY_ROW3__UART5_DCE_RX		0x1b0b1
+			MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS		0x1b0b1
+			MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS		0x1b0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
index aa194a2..0b02c7e 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -42,8 +42,8 @@
 #define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_RX                            0x0024 0x036C 0x0830 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_TX                            0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX                        0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX                        0x0024 0x036C 0x0830 0x0 0x0
 #define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
@@ -51,8 +51,8 @@
 #define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO05__UART1_RX                            0x0028 0x0370 0x0830 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO05__UART1_TX                            0x0028 0x0370 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX                        0x0028 0x0370 0x0830 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX                        0x0028 0x0370 0x0000 0x0 0x0
 #define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
@@ -60,21 +60,23 @@
 #define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_RX                            0x002C 0x0374 0x0838 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_TX                            0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX                        0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX                        0x002C 0x0374 0x0838 0x0 0x0
 #define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
 #define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B                         0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS                       0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DTE_CTS                       0x002C 0x0374 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART2_RX                            0x0030 0x0378 0x0838 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO07__UART2_TX                            0x0030 0x0378 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX                        0x0030 0x0378 0x0838 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX                        0x0030 0x0378 0x0000 0x0 0x0
 #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS                       0x0030 0x0378 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DTE_RTS                       0x0030 0x0378 0x082C 0x4 0x1
 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
@@ -83,7 +85,8 @@
 #define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
-#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B                         0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS                       0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__UART2_DTE_CTS                       0x0034 0x037C 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
@@ -92,7 +95,8 @@
 #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS                       0x0038 0x0380 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DTE_RTS                       0x0038 0x0380 0x0834 0x4 0x1
 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
@@ -177,8 +181,8 @@
 #define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
 #define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
 #define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_RX                            0x005C 0x03A4 0x0858 0x4 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_TX                            0x005C 0x03A4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DCE_RX                        0x005C 0x03A4 0x0858 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DTE_TX                        0x005C 0x03A4 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
@@ -188,8 +192,8 @@
 #define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
 #define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
 #define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA05__UART6_RX                            0x0060 0x03A8 0x0858 0x4 0x1
-#define MX6SX_PAD_CSI_DATA05__UART6_TX                            0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DCE_TX                        0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DTE_RX                        0x0060 0x03A8 0x0858 0x4 0x1
 #define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
@@ -199,7 +203,8 @@
 #define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
 #define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
 #define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
-#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B                         0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS                       0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DTE_CTS                       0x0064 0x03AC 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
@@ -209,7 +214,8 @@
 #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS                       0x0068 0x03B0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DTE_RTS                       0x0068 0x03B0 0x0854 0x4 0x1
 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
@@ -218,7 +224,8 @@
 #define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
 #define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
 #define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
-#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B                          0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS                        0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__UART4_DTE_CTS                        0x006C 0x03B4 0x0000 0x3 0x0
 #define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
@@ -228,8 +235,8 @@
 #define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
 #define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
 #define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_MCLK__UART4_RX                              0x0070 0x03B8 0x0848 0x3 0x2
-#define MX6SX_PAD_CSI_MCLK__UART4_TX                              0x0070 0x03B8 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_MCLK__UART4_DCE_RX                          0x0070 0x03B8 0x0848 0x3 0x2
+#define MX6SX_PAD_CSI_MCLK__UART4_DTE_TX                          0x0070 0x03B8 0x0000 0x3 0x0
 #define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
@@ -239,8 +246,8 @@
 #define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
 #define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
 #define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_PIXCLK__UART4_RX                            0x0074 0x03BC 0x0848 0x3 0x3
-#define MX6SX_PAD_CSI_PIXCLK__UART4_TX                            0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX                        0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX                        0x0074 0x03BC 0x0848 0x3 0x3
 #define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
@@ -250,7 +257,8 @@
 #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS                        0x0078 0x03C0 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_VSYNC__UART4_DTE_RTS                        0x0078 0x03C0 0x0844 0x3 0x3
 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
@@ -330,8 +338,8 @@
 #define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
 #define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
 #define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
-#define MX6SX_PAD_ENET2_COL__UART1_RX                             0x0094 0x03DC 0x0830 0x3 0x2
-#define MX6SX_PAD_ENET2_COL__UART1_TX                             0x0094 0x03DC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_COL__UART1_DCE_RX                         0x0094 0x03DC 0x0830 0x3 0x2
+#define MX6SX_PAD_ENET2_COL__UART1_DTE_TX                         0x0094 0x03DC 0x0000 0x3 0x0
 #define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
 #define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
@@ -341,8 +349,8 @@
 #define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
 #define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
 #define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
-#define MX6SX_PAD_ENET2_CRS__UART1_RX                             0x0098 0x03E0 0x0830 0x3 0x3
-#define MX6SX_PAD_ENET2_CRS__UART1_TX                             0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__UART1_DCE_TX                         0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__UART1_DTE_RX                         0x0098 0x03E0 0x0830 0x3 0x3
 #define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
 #define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
@@ -352,7 +360,8 @@
 #define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
 #define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
 #define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B                       0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS                     0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DTE_CTS                     0x009C 0x03E4 0x0000 0x3 0x0
 #define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
 #define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
@@ -362,7 +371,8 @@
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS                     0x00A0 0x03E8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DTE_RTS                     0x00A0 0x03E8 0x082C 0x3 0x3
 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
@@ -371,7 +381,8 @@
 #define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
 #define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL0__UART6_RTS_B                           0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__UART6_DCE_RTS                         0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__UART6_DTE_CTS                         0x00A4 0x03EC 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
 #define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
 #define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
@@ -380,8 +391,8 @@
 #define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
 #define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL1__UART6_RX                              0x00A8 0x03F0 0x0858 0x2 0x2
-#define MX6SX_PAD_KEY_COL1__UART6_TX                              0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DCE_TX                          0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DTE_RX                          0x00A8 0x03F0 0x0858 0x2 0x2
 #define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
 #define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
 #define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
@@ -389,7 +400,8 @@
 #define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
 #define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
-#define MX6SX_PAD_KEY_COL2__UART5_RTS_B                           0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__UART5_DCE_RTS                         0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__UART5_DTE_CTS                         0x00AC 0x03F4 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
 #define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
 #define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
@@ -397,8 +409,8 @@
 #define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
 #define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL3__UART5_RX                              0x00B0 0x03F8 0x0850 0x2 0x2
-#define MX6SX_PAD_KEY_COL3__UART5_TX                              0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DCE_TX                          0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DTE_RX                          0x00B0 0x03F8 0x0850 0x2 0x2
 #define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
 #define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
 #define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
@@ -414,7 +426,8 @@
 #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS                         0x00B8 0x0400 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DTE_RTS                         0x00B8 0x0400 0x0854 0x2 0x3
 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
@@ -423,8 +436,8 @@
 #define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
 #define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW1__UART6_RX                              0x00BC 0x0404 0x0858 0x2 0x3
-#define MX6SX_PAD_KEY_ROW1__UART6_TX                              0x00BC 0x0404 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW1__UART6_DCE_RX                          0x00BC 0x0404 0x0858 0x2 0x3
+#define MX6SX_PAD_KEY_ROW1__UART6_DTE_TX                          0x00BC 0x0404 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
 #define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
 #define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
@@ -433,7 +446,8 @@
 #define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS                         0x00C0 0x0408 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW2__UART5_DTE_RTS                         0x00C0 0x0408 0x084C 0x2 0x3
 #define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
@@ -441,8 +455,8 @@
 #define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
 #define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW3__UART5_RX                              0x00C4 0x040C 0x0850 0x2 0x3
-#define MX6SX_PAD_KEY_ROW3__UART5_TX                              0x00C4 0x040C 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW3__UART5_DCE_RX                          0x00C4 0x040C 0x0850 0x2 0x3
+#define MX6SX_PAD_KEY_ROW3__UART5_DTE_TX                          0x00C4 0x040C 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
 #define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
 #define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
@@ -815,7 +829,8 @@
 #define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B                        0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS                      0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DTE_CTS                      0x0160 0x04A8 0x0000 0x3 0x0
 #define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
 #define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
@@ -825,7 +840,8 @@
 #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS                      0x0164 0x04AC 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DTE_RTS                      0x0164 0x04AC 0x083C 0x3 0x1
 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
@@ -835,8 +851,8 @@
 #define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_RX                           0x0168 0x04B0 0x0840 0x3 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_TX                           0x0168 0x04B0 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DCE_RX                       0x0168 0x04B0 0x0840 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DTE_TX                       0x0168 0x04B0 0x0000 0x3 0x0
 #define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
 #define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
@@ -846,8 +862,8 @@
 #define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA07__UART3_RX                           0x016C 0x04B4 0x0840 0x3 0x1
-#define MX6SX_PAD_NAND_DATA07__UART3_TX                           0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DCE_TX                       0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DTE_RX                       0x016C 0x04B4 0x0840 0x3 0x1
 #define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
 #define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
@@ -967,7 +983,8 @@
 #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS                     0x01A0 0x04E8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DTE_RTS                     0x01A0 0x04E8 0x083C 0x1 0x4
 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
@@ -975,7 +992,8 @@
 #define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B                       0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS                     0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DTE_CTS                     0x01A4 0x04EC 0x0000 0x1 0x0
 #define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
 #define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
 #define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
@@ -1007,8 +1025,8 @@
 #define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
 #define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX                           0x01B4 0x04FC 0x0840 0x1 0x4
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX                           0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX                       0x01B4 0x04FC 0x0840 0x1 0x4
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX                       0x01B4 0x04FC 0x0000 0x0 0x0
 #define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
 #define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
 #define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
@@ -1016,8 +1034,8 @@
 #define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
 #define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX                          0x01B8 0x0500 0x0840 0x1 0x5
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX                          0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX                      0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX                      0x01B8 0x0500 0x0840 0x1 0x5
 #define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
 #define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
 #define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
@@ -1224,8 +1242,8 @@
 #define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
 #define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
 #define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA0__UART2_RX                             0x0228 0x0570 0x0838 0x4 0x2
-#define MX6SX_PAD_SD1_DATA0__UART2_TX                             0x0228 0x0570 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA0__UART2_DCE_RX                         0x0228 0x0570 0x0838 0x4 0x2
+#define MX6SX_PAD_SD1_DATA0__UART2_DTE_TX                         0x0228 0x0570 0x0000 0x4 0x0
 #define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
@@ -1235,8 +1253,8 @@
 #define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
 #define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
 #define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA1__UART2_RX                             0x022C 0x0574 0x0838 0x4 0x3
-#define MX6SX_PAD_SD1_DATA1__UART2_TX                             0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DCE_TX                         0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DTE_RX                         0x022C 0x0574 0x0838 0x4 0x3
 #define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
@@ -1246,7 +1264,8 @@
 #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS                        0x0230 0x0578 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DTE_RTS                        0x0230 0x0578 0x0834 0x4 0x2
 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
@@ -1255,7 +1274,8 @@
 #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
 #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
 #define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B                          0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS                        0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__UART2_DTE_CTS                        0x0234 0x057C 0x0000 0x4 0x0
 #define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
@@ -1287,8 +1307,8 @@
 #define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
 #define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
 #define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA0__UART4_RX                             0x0240 0x0588 0x0848 0x7 0x4
-#define MX6SX_PAD_SD2_DATA0__UART4_TX                             0x0240 0x0588 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA0__UART4_DCE_RX                         0x0240 0x0588 0x0848 0x7 0x4
+#define MX6SX_PAD_SD2_DATA0__UART4_DTE_TX                         0x0240 0x0588 0x0000 0x7 0x0
 #define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
 #define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
@@ -1298,8 +1318,8 @@
 #define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
 #define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
 #define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA1__UART4_RX                             0x0244 0x058C 0x0848 0x7 0x5
-#define MX6SX_PAD_SD2_DATA1__UART4_TX                             0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DCE_TX                         0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DTE_RX                         0x0244 0x058C 0x0848 0x7 0x5
 #define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
 #define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
@@ -1309,8 +1329,8 @@
 #define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
 #define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
 #define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA2__UART6_RX                             0x0248 0x0590 0x0858 0x7 0x4
-#define MX6SX_PAD_SD2_DATA2__UART6_TX                             0x0248 0x0590 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA2__UART6_DCE_RX                         0x0248 0x0590 0x0858 0x7 0x4
+#define MX6SX_PAD_SD2_DATA2__UART6_DTE_TX                         0x0248 0x0590 0x0000 0x7 0x0
 #define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
 #define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
@@ -1320,12 +1340,13 @@
 #define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
 #define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
 #define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
-#define MX6SX_PAD_SD2_DATA3__UART6_RX                             0x024C 0x0594 0x0858 0x7 0x5
-#define MX6SX_PAD_SD2_DATA3__UART6_TX                             0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__UART6_DCE_TX                         0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__UART6_DTE_RX                         0x024C 0x0594 0x0858 0x7 0x5
 #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DCE_CTS                          0x0250 0x0598 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DTE_RTS                          0x0250 0x0598 0x0844 0x1 0x0
 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
@@ -1334,8 +1355,8 @@
 #define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
 #define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_RX                               0x0254 0x059C 0x0848 0x1 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_TX                               0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DCE_TX                           0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DTE_RX                           0x0254 0x059C 0x0848 0x1 0x0
 #define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
 #define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
 #define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
@@ -1364,7 +1385,8 @@
 #define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
 #define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B                          0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS                        0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__UART4_DTE_CTS                        0x0260 0x05A8 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
 #define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
 #define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
@@ -1374,8 +1396,8 @@
 #define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
 #define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA3__UART4_RX                             0x0264 0x05AC 0x0848 0x1 0x1
-#define MX6SX_PAD_SD3_DATA3__UART4_TX                             0x0264 0x05AC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA3__UART4_DCE_RX                         0x0264 0x05AC 0x0848 0x1 0x1
+#define MX6SX_PAD_SD3_DATA3__UART4_DTE_TX                         0x0264 0x05AC 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
 #define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
 #define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
@@ -1387,8 +1409,8 @@
 #define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
 #define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
-#define MX6SX_PAD_SD3_DATA4__UART3_RX                             0x0268 0x05B0 0x0840 0x3 0x2
-#define MX6SX_PAD_SD3_DATA4__UART3_TX                             0x0268 0x05B0 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA4__UART3_DCE_RX                         0x0268 0x05B0 0x0840 0x3 0x2
+#define MX6SX_PAD_SD3_DATA4__UART3_DTE_TX                         0x0268 0x05B0 0x0000 0x3 0x0
 #define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
@@ -1398,8 +1420,8 @@
 #define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA5__UART3_RX                             0x026C 0x05B4 0x0840 0x3 0x3
-#define MX6SX_PAD_SD3_DATA5__UART3_TX                             0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DCE_TX                         0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DTE_RX                         0x026C 0x05B4 0x0840 0x3 0x3
 #define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
@@ -1409,7 +1431,8 @@
 #define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B                          0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS                        0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__UART3_DTE_CTS                        0x0270 0x05B8 0x0000 0x3 0x0
 #define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
@@ -1419,7 +1442,8 @@
 #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS                        0x0274 0x05BC 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DTE_RTS                        0x0274 0x05BC 0x083C 0x3 0x3
 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
@@ -1488,8 +1512,8 @@
 #define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_RX                             0x0290 0x05D8 0x0850 0x2 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_TX                             0x0290 0x05D8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DCE_RX                         0x0290 0x05D8 0x0850 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DTE_TX                         0x0290 0x05D8 0x0000 0x2 0x0
 #define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
 #define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
@@ -1499,8 +1523,8 @@
 #define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA5__UART5_RX                             0x0294 0x05DC 0x0850 0x2 0x1
-#define MX6SX_PAD_SD4_DATA5__UART5_TX                             0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DCE_TX                         0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DTE_RX                         0x0294 0x05DC 0x0850 0x2 0x1
 #define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
 #define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
@@ -1510,7 +1534,8 @@
 #define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B                          0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS                        0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DTE_CTS                        0x0298 0x05E0 0x0000 0x2 0x0
 #define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
 #define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
@@ -1520,7 +1545,8 @@
 #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS                        0x029C 0x05E4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DTE_RTS                        0x029C 0x05E4 0x084C 0x2 0x1
 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
@@ -1551,4 +1577,92 @@
 #define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
 #define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
 
+/* these are not supposed to be used any more and remove them after some time */
+#define MX6SX_PAD_GPIO1_IO04__UART1_RX		MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX
+#define MX6SX_PAD_GPIO1_IO04__UART1_TX		MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX
+#define MX6SX_PAD_GPIO1_IO05__UART1_RX		MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX
+#define MX6SX_PAD_GPIO1_IO05__UART1_TX		MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART2_RX		MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX
+#define MX6SX_PAD_GPIO1_IO06__UART2_TX		MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B	MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO07__UART2_RX		MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX
+#define MX6SX_PAD_GPIO1_IO07__UART2_TX		MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B	MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS
+#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B	MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B	MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS
+#define MX6SX_PAD_CSI_DATA04__UART6_RX		MX6SX_PAD_CSI_DATA04__UART6_DCE_RX
+#define MX6SX_PAD_CSI_DATA04__UART6_TX		MX6SX_PAD_CSI_DATA04__UART6_DTE_TX
+#define MX6SX_PAD_CSI_DATA05__UART6_RX		MX6SX_PAD_CSI_DATA05__UART6_DTE_RX
+#define MX6SX_PAD_CSI_DATA05__UART6_TX		MX6SX_PAD_CSI_DATA05__UART6_DCE_TX
+#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B	MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B	MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS
+#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B	MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS
+#define MX6SX_PAD_CSI_MCLK__UART4_RX		MX6SX_PAD_CSI_MCLK__UART4_DCE_RX
+#define MX6SX_PAD_CSI_MCLK__UART4_TX		MX6SX_PAD_CSI_MCLK__UART4_DTE_TX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_RX		MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_TX		MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B	MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS
+#define MX6SX_PAD_ENET2_COL__UART1_RX		MX6SX_PAD_ENET2_COL__UART1_DCE_RX
+#define MX6SX_PAD_ENET2_COL__UART1_TX		MX6SX_PAD_ENET2_COL__UART1_DTE_TX
+#define MX6SX_PAD_ENET2_CRS__UART1_RX		MX6SX_PAD_ENET2_CRS__UART1_DTE_RX
+#define MX6SX_PAD_ENET2_CRS__UART1_TX		MX6SX_PAD_ENET2_CRS__UART1_DCE_TX
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B	MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B	MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS
+#define MX6SX_PAD_KEY_COL0__UART6_RTS_B		MX6SX_PAD_KEY_COL0__UART6_DCE_RTS
+#define MX6SX_PAD_KEY_COL1__UART6_RX		MX6SX_PAD_KEY_COL1__UART6_DTE_RX
+#define MX6SX_PAD_KEY_COL1__UART6_TX		MX6SX_PAD_KEY_COL1__UART6_DCE_TX
+#define MX6SX_PAD_KEY_COL2__UART5_RTS_B		MX6SX_PAD_KEY_COL2__UART5_DCE_RTS
+#define MX6SX_PAD_KEY_COL3__UART5_RX		MX6SX_PAD_KEY_COL3__UART5_DTE_RX
+#define MX6SX_PAD_KEY_COL3__UART5_TX		MX6SX_PAD_KEY_COL3__UART5_DCE_TX
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B		MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS
+#define MX6SX_PAD_KEY_ROW1__UART6_RX		MX6SX_PAD_KEY_ROW1__UART6_DCE_RX
+#define MX6SX_PAD_KEY_ROW1__UART6_TX		MX6SX_PAD_KEY_ROW1__UART6_DTE_TX
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B		MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS
+#define MX6SX_PAD_KEY_ROW3__UART5_RX		MX6SX_PAD_KEY_ROW3__UART5_DCE_RX
+#define MX6SX_PAD_KEY_ROW3__UART5_TX		MX6SX_PAD_KEY_ROW3__UART5_DTE_TX
+#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B	MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B	MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS
+#define MX6SX_PAD_NAND_DATA06__UART3_RX		MX6SX_PAD_NAND_DATA06__UART3_DCE_RX
+#define MX6SX_PAD_NAND_DATA06__UART3_TX		MX6SX_PAD_NAND_DATA06__UART3_DTE_TX
+#define MX6SX_PAD_NAND_DATA07__UART3_RX		MX6SX_PAD_NAND_DATA07__UART3_DTE_RX
+#define MX6SX_PAD_NAND_DATA07__UART3_TX		MX6SX_PAD_NAND_DATA07__UART3_DCE_TX
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B	MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B	MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX		MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX		MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX
+#define MX6SX_PAD_SD1_DATA0__UART2_RX		MX6SX_PAD_SD1_DATA0__UART2_DCE_RX
+#define MX6SX_PAD_SD1_DATA0__UART2_TX		MX6SX_PAD_SD1_DATA0__UART2_DTE_TX
+#define MX6SX_PAD_SD1_DATA1__UART2_RX		MX6SX_PAD_SD1_DATA1__UART2_DTE_RX
+#define MX6SX_PAD_SD1_DATA1__UART2_TX		MX6SX_PAD_SD1_DATA1__UART2_DCE_TX
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B	MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS
+#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B	MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS
+#define MX6SX_PAD_SD2_DATA0__UART4_RX		MX6SX_PAD_SD2_DATA0__UART4_DCE_RX
+#define MX6SX_PAD_SD2_DATA0__UART4_TX		MX6SX_PAD_SD2_DATA0__UART4_DTE_TX
+#define MX6SX_PAD_SD2_DATA1__UART4_RX		MX6SX_PAD_SD2_DATA1__UART4_DTE_RX
+#define MX6SX_PAD_SD2_DATA1__UART4_TX		MX6SX_PAD_SD2_DATA1__UART4_DCE_TX
+#define MX6SX_PAD_SD2_DATA2__UART6_RX		MX6SX_PAD_SD2_DATA2__UART6_DCE_RX
+#define MX6SX_PAD_SD2_DATA2__UART6_TX		MX6SX_PAD_SD2_DATA2__UART6_DTE_TX
+#define MX6SX_PAD_SD2_DATA3__UART6_RX		MX6SX_PAD_SD2_DATA3__UART6_DTE_RX
+#define MX6SX_PAD_SD2_DATA3__UART6_TX		MX6SX_PAD_SD2_DATA3__UART6_DCE_TX
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B		MX6SX_PAD_SD3_CLK__UART4_DCE_CTS
+#define MX6SX_PAD_SD3_CMD__UART4_RX		MX6SX_PAD_SD3_CMD__UART4_DTE_RX
+#define MX6SX_PAD_SD3_CMD__UART4_TX		MX6SX_PAD_SD3_CMD__UART4_DCE_TX
+#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B	MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS
+#define MX6SX_PAD_SD3_DATA3__UART4_RX		MX6SX_PAD_SD3_DATA3__UART4_DCE_RX
+#define MX6SX_PAD_SD3_DATA3__UART4_TX		MX6SX_PAD_SD3_DATA3__UART4_DTE_TX
+#define MX6SX_PAD_SD3_DATA4__UART3_RX		MX6SX_PAD_SD3_DATA4__UART3_DCE_RX
+#define MX6SX_PAD_SD3_DATA4__UART3_TX		MX6SX_PAD_SD3_DATA4__UART3_DTE_TX
+#define MX6SX_PAD_SD3_DATA5__UART3_RX		MX6SX_PAD_SD3_DATA5__UART3_DTE_RX
+#define MX6SX_PAD_SD3_DATA5__UART3_TX		MX6SX_PAD_SD3_DATA5__UART3_DCE_TX
+#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B	MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B	MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS
+#define MX6SX_PAD_SD4_DATA4__UART5_RX		MX6SX_PAD_SD4_DATA4__UART5_DCE_RX
+#define MX6SX_PAD_SD4_DATA4__UART5_TX		MX6SX_PAD_SD4_DATA4__UART5_DTE_TX
+#define MX6SX_PAD_SD4_DATA5__UART5_RX		MX6SX_PAD_SD4_DATA5__UART5_DTE_RX
+#define MX6SX_PAD_SD4_DATA5__UART5_TX		MX6SX_PAD_SD4_DATA5__UART5_DCE_TX
+#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B	MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B	MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS
+
 #endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 315044c..8259244 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -229,8 +229,8 @@ MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f6972de..3e5fb72 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -564,17 +564,17 @@ MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
 
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+				MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
 			>;
 		};
 
 		pinctrl_uart5: uart5grp {
 			fsl,pins = <
-				MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
-				MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
-				MX6SX_PAD_KEY_ROW2__UART5_CTS_B		0x1b0b1
-				MX6SX_PAD_KEY_COL2__UART5_RTS_B		0x1b0b1
+				MX6SX_PAD_KEY_ROW3__UART5_DCE_RX	0x1b0b1
+				MX6SX_PAD_KEY_COL3__UART5_DCE_TX	0x1b0b1
+				MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS	0x1b0b1
+				MX6SX_PAD_KEY_COL2__UART5_DCE_RTS	0x1b0b1
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index 28563f21..6b728b0 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -352,6 +352,12 @@ MX6SX_PAD_NAND_CLE__I2C3_SCL		0x4001b8b1
 		>;
 	};
 
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_DATA02__GPIO4_IO_6	0x10b0
+		>;
+	};
+
 	pinctrl_pwm1: pwm1grp-1 {
 		fsl,pins = <
 			/* blue LED */
@@ -384,15 +390,15 @@ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x70e0
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1
 		>;
 	};
 
@@ -490,6 +496,14 @@ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
 	};
 };
 
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index 25d4aa9..ee64565 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -235,28 +235,28 @@ pinctrl_i2c4: i2c4grp {
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1>;
+			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1>;
+			<MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1>;
 	};
 
 	pinctrl_uart3: uart3grp {
 		fsl,pins =
-			<MX6SX_PAD_SD3_DATA4__UART3_RX          0x13059>,
-			<MX6SX_PAD_SD3_DATA5__UART3_TX          0x13059>,
-			<MX6SX_PAD_SD3_DATA6__UART3_RTS_B       0x13059>,
-			<MX6SX_PAD_SD3_DATA7__UART3_CTS_B       0x13059>;
+			<MX6SX_PAD_SD3_DATA4__UART3_DCE_RX	0x13059>,
+			<MX6SX_PAD_SD3_DATA5__UART3_DCE_TX	0x13059>,
+			<MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS	0x13059>,
+			<MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS	0x13059>;
 	};
 
 	pinctrl_uart5: uart5grp {
 		fsl,pins =
-			<MX6SX_PAD_SD4_DATA4__UART5_RX		0x1b0b1>,
-			<MX6SX_PAD_SD4_DATA5__UART5_TX		0x1b0b1>;
+			<MX6SX_PAD_SD4_DATA4__UART5_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_SD4_DATA5__UART5_DCE_TX	0x1b0b1>;
 	};
 
 	pinctrl_uart6: uart6grp {
@@ -265,10 +265,10 @@ pinctrl_uart6: uart6grp {
 			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
 			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
 			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA04__UART6_RX		0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA05__UART6_TX		0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA06__UART6_RTS_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA07__UART6_CTS_B	0x1b0b1>;
+			<MX6SX_PAD_CSI_DATA04__UART6_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA05__UART6_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS	0x1b0b1>;
 	};
 
 	pinctrl_otg1_reg: otg1grp {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 59bad60..d6f8317 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -87,6 +87,8 @@ cpu0: cpu@0 {
 				      "pll1_sw", "pll1_sys";
 			arm-supply = <&reg_arm>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 	};
 
@@ -235,7 +237,7 @@ gpmi: gpmi-nand@1806000{
 			status = "disabled";
 		};
 
-		aips1: aips-bus@2000000 {
+		aips1: bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -466,7 +468,7 @@ flexcan2: can@2094000 {
 				status = "disabled";
 			};
 
-			gpt: gpt@2098000 {
+			gpt: timer@2098000 {
 				compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +561,7 @@ gpio7: gpio@20b4000 {
 				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
 			};
 
-			kpp: kpp@20b8000 {
+			kpp: keypad@20b8000 {
 				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -567,14 +569,14 @@ kpp: kpp@20b8000 {
 				status = "disabled";
 			};
 
-			wdog1: wdog@20bc000 {
+			wdog1: watchdog@20bc000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_IPG>;
 			};
 
-			wdog2: wdog@20c0000 {
+			wdog2: watchdog@20c0000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -582,7 +584,7 @@ wdog2: wdog@20c0000 {
 				status = "disabled";
 			};
 
-			clks: ccm@20c4000 {
+			clks: clock-controller@20c4000 {
 				compatible = "fsl,imx6sx-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -806,7 +808,7 @@ pd_pci: power-domain@3 {
 				};
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6sx-iomuxc";
 				reg = <0x020e0000 0x4000>;
 			};
@@ -830,14 +832,14 @@ sdma: sdma@20ec000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02100000 0x100000>;
 			ranges;
 
-			crypto: caam@2100000 {
+			crypto: crypto@2100000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -850,13 +852,13 @@ crypto: caam@2100000 {
 					 <&clks IMX6SX_CLK_EIM_SLOW>;
 				clock-names = "mem", "aclk", "ipg", "emi_slow";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -1051,13 +1053,17 @@ weim: weim@21b8000 {
 				status = "disabled";
 			};
 
-			ocotp: ocotp@21bc000 {
+			ocotp: ocotp-ctrl@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SX_CLK_OCOTP>;
 
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
 				tempmon_calib: calib@38 {
 					reg = <0x38 4>;
 				};
@@ -1188,7 +1194,7 @@ i2c4: i2c@21f8000 {
 			};
 		};
 
-		aips3: aips-bus@2200000 {
+		aips3: bus@2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1289,7 +1295,7 @@ adc2: adc@2284000 {
 				status = "disabled";
 			};
 
-			wdog3: wdog@2288000 {
+			wdog3: watchdog@2288000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x02288000 0x4000>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index 3749fdd..5d3805b 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -25,7 +25,7 @@ lcd_backlight: backlight {
 	};
 
 	panel {
-		compatible = "auo,g101evn010", "simple-panel";
+		compatible = "auo,g101evn010";
 		power-supply = <&ldo4_ext>;
 		backlight = <&lcd_backlight>;
 
diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
new file mode 100644
index 0000000..162dc25
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and DWARF baseboard";
+	compatible = "technexion,imx6ul-pico-dwarf", "fsl,imx6ul";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
index de9f8318..df1da98 100644
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/imx6ul-pico.dtsi
@@ -20,7 +20,7 @@ chosen {
 		stdout-path = &uart6;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm3 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -72,6 +72,17 @@ reg_brcm: regulator-brcm {
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <200000>;
 	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -154,31 +165,11 @@ vref_reg: vrefddr {
 &lcdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
-	display = <&display0>;
 	status = "okay";
 
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-
-			timing0: timing0 {
-				clock-frequency = <33200000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <210>;
-				hback-porch = <46>;
-				hsync-len = <1>;
-				vback-porch = <22>;
-				vfront-porch = <23>;
-				vsync-len = <1>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index d9fdca1..2ccf67c 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -204,7 +204,7 @@ gpmi: gpmi-nand@1806000 {
 			status = "disabled";
 		};
 
-		aips1: aips-bus@2000000 {
+		aips1: bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -430,7 +430,7 @@ can2: flexcan@2094000 {
 				status = "disabled";
 			};
 
-			gpt1: gpt@2098000 {
+			gpt1: timer@2098000 {
 				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -523,7 +523,7 @@ fec2: ethernet@20b4000 {
 				status = "disabled";
 			};
 
-			kpp: kpp@20b8000 {
+			kpp: keypad@20b8000 {
 				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -531,14 +531,14 @@ kpp: kpp@20b8000 {
 				status = "disabled";
 			};
 
-			wdog1: wdog@20bc000 {
+			wdog1: watchdog@20bc000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_WDOG1>;
 			};
 
-			wdog2: wdog@20c0000 {
+			wdog2: watchdog@20c0000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -546,7 +546,7 @@ wdog2: wdog@20c0000 {
 				status = "disabled";
 			};
 
-			clks: ccm@20c4000 {
+			clks: clock-controller@20c4000 {
 				compatible = "fsl,imx6ul-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -693,7 +693,7 @@ gpc: gpc@20dc000 {
 				interrupt-parent = <&intc>;
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6ul-iomuxc";
 				reg = <0x020e0000 0x4000>;
 			};
@@ -704,7 +704,7 @@ gpr: iomuxc-gpr@20e4000 {
 				reg = <0x020e4000 0x4000>;
 			};
 
-			gpt2: gpt@20e8000 {
+			gpt2: timer@20e8000 {
 				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 				reg = <0x020e8000 0x4000>;
 				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -771,14 +771,14 @@ pwm8: pwm@20fc000 {
 			};
 		};
 
-		aips2: aips-bus@2100000 {
+		aips2: bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02100000 0x100000>;
 			ranges;
 
-			crypto: caam@2140000 {
+			crypto: crypto@2140000 {
 				compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -789,19 +789,19 @@ crypto: caam@2140000 {
 					 <&clks IMX6UL_CLK_CAAM_MEM>;
 				clock-names = "ipg", "aclk", "mem";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr2: jr2@3000 {
+				sec_jr2: jr@3000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x3000 0x1000>;
 					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -1007,7 +1007,7 @@ qspi: spi@21e0000 {
 				status = "disabled";
 			};
 
-			wdog3: wdog@21e4000 {
+			wdog3: watchdog@21e4000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x021e4000 0x4000>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index b7e67d12..fcde7f7 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -51,7 +51,7 @@ &usdhc2 {
 
 / {
 	soc {
-		aips3: aips-bus@2200000 {
+		aips3: bus@2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
new file mode 100644
index 0000000..9fa701b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * ADC2 is not available on the Aster board and
+ * conflicts with AD7879 resistive touchscreen.
+ */
+&adc2 {
+	status = "disabled";
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Microchip/Atmel maxtouch controller */
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiotouch>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;	/* SODIMM 106 */
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpiotouch: touchgpios {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15        0x74
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28          0x14
+		>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	keep-power-in-suspend;
+	no-1-8-v;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 6aa123c..9760137 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -1,46 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 / {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index d05be3f..4fec903 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 / {
@@ -130,6 +93,184 @@ &flexcan2 {
 	status = "disabled";
 };
 
+&gpio1 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_135",
+			  "SODIMM_22",
+			  "",
+			  "",
+			  "SODIMM_37",
+			  "SODIMM_29",
+			  "SODIMM_59",
+			  "SODIMM_28",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "",
+			  "",
+			  "SODIMM_188",
+			  "SODIMM_178";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_105",
+			  "SODIMM_152",
+			  "SODIMM_150",
+			  "SODIMM_95",
+			  "SODIMM_126",
+			  "SODIMM_107",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "SODIMM_127",
+			  "SODIMM_130",
+			  "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_133",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_128";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_93",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_35",
+			  "SODIMM_33",
+			  "SODIMM_38",
+			  "SODIMM_36",
+			  "SODIMM_21",
+			  "SODIMM_19",
+			  "SODIMM_131",
+			  "SODIMM_129",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_75",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_67",
+			  "SODIMM_59",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_69",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_47",
+			  "SODIMM_190",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53",
+			  "",
+			  "",
+			  "SODIMM_98",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_100",
+			  "SODIMM_102";
+};
+
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "SODIMM_63",
+			  "SODIMM_55",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_196",
+			  "SODIMM_194",
+			  "",
+			  "SODIMM_99",
+			  "",
+			  "",
+			  "SODIMM_137";
+};
+
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -346,7 +487,7 @@ &usdhc3 {
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
-		     &pinctrl_gpio7>;
+		     &pinctrl_gpio7 &pinctrl_usbc_det>;
 
 	pinctrl_gpio1: gpio1-grp {
 		fsl,pins = <
@@ -357,7 +498,6 @@ MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
 			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
 			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
 			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 */
 			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
 			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
 			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
@@ -374,7 +514,6 @@ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
 			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
 			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
 			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x74 /* SODIMM 106 */
 			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
 			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
 			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
@@ -451,7 +590,6 @@ MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
 
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14			0x14
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
 			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
 			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
@@ -649,6 +787,12 @@ MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
 		>;
 	};
 
+	pinctrl_usbc_det: gpio-usbc-det {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14	0x14
+		>;
+	};
+
 	pinctrl_usbh_reg: gpio-usbh-vbus {
 		fsl,pins = <
 			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 7646284..89267cd 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -85,12 +85,12 @@ &i2c2 {
 
 	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
+		reg = <0x8>;
 
 		regulators {
 			sw1a_reg: sw1a {
 				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <6250>;
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts
new file mode 100644
index 0000000..f3f0537
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
new file mode 100644
index 0000000..2048027
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-aster",
+		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
index 898f4b8..af39e53 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -13,6 +13,32 @@ memory@80000000 {
 	};
 };
 
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "SODIMM_157",
+			  "",
+			  "SODIMM_163",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
 &usbotg2 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
index 136e11a..87b132bcd 100644
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
index e2e327f..c59d72e 100644
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 #include "imx7d.dtsi"
diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/imx7d-pico-dwarf.dts
new file mode 100644
index 0000000..5162fe2
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico-dwarf.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx7d-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX7D and DWARF baseboard";
+	compatible = "technexion,imx7d-pico-dwarf", "fsl,imx7d";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx7d-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c1 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c4 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9554: io-expander@25 {
+		compatible = "nxp,pca9554";
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		reg = <0x25>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pca9554 4 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/imx7d-pico-nymph.dts
new file mode 100644
index 0000000..104a852
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico-nymph.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx7d-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX7 and NYMPH baseboard";
+	compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx7d-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c1 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	adc@52 {
+		compatible = "ti,adc081c";
+		reg = <0x52>;
+		vref-supply = <&reg_2p5v>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts
new file mode 100644
index 0000000..fca4e0a
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
index bd2a49c..aa70d3f 100644
--- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
index 6d16e32..94de220 100644
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2016-2020 Toradex
  */
 
 #include "imx7s.dtsi"
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 568d7a9..76e3ffb 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -315,7 +315,7 @@ intc: interrupt-controller@31001000 {
 			      <0x31006000 0x2000>;
 		};
 
-		aips1: aips-bus@30000000 {
+		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -406,14 +406,14 @@ gpio7: gpio@30260000 {
 				gpio-ranges = <&iomuxc 0 139 16>;
 			};
 
-			wdog1: wdog@30280000 {
+			wdog1: watchdog@30280000 {
 				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 				reg = <0x30280000 0x10000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
 			};
 
-			wdog2: wdog@30290000 {
+			wdog2: watchdog@30290000 {
 				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 				reg = <0x30290000 0x10000>;
 				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -421,7 +421,7 @@ wdog2: wdog@30290000 {
 				status = "disabled";
 			};
 
-			wdog3: wdog@302a0000 {
+			wdog3: watchdog@302a0000 {
 				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 				reg = <0x302a0000 0x10000>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -429,7 +429,7 @@ wdog3: wdog@302a0000 {
 				status = "disabled";
 			};
 
-			wdog4: wdog@302b0000 {
+			wdog4: watchdog@302b0000 {
 				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -443,7 +443,7 @@ iomuxc_lpsr: iomuxc-lpsr@302c0000 {
 				fsl,input-sel = <&iomuxc>;
 			};
 
-			gpt1: gpt@302d0000 {
+			gpt1: timer@302d0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -452,7 +452,7 @@ gpt1: gpt@302d0000 {
 				clock-names = "ipg", "per";
 			};
 
-			gpt2: gpt@302e0000 {
+			gpt2: timer@302e0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -462,7 +462,7 @@ gpt2: gpt@302e0000 {
 				status = "disabled";
 			};
 
-			gpt3: gpt@302f0000 {
+			gpt3: timer@302f0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -472,7 +472,7 @@ gpt3: gpt@302f0000 {
 				status = "disabled";
 			};
 
-			gpt4: gpt@30300000 {
+			gpt4: timer@30300000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -482,7 +482,7 @@ gpt4: gpt@30300000 {
 				status = "disabled";
 			};
 
-			kpp: kpp@30320000 {
+			kpp: keypad@30320000 {
 				compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
 				reg = <0x30320000 0x10000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -490,7 +490,7 @@ kpp: kpp@30320000 {
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@30330000 {
+			iomuxc: pinctrl@30330000 {
 				compatible = "fsl,imx7d-iomuxc";
 				reg = <0x30330000 0x10000>;
 			};
@@ -606,13 +606,15 @@ snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SNVS_CLK>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
 				};
 			};
 
-			clks: ccm@30380000 {
+			clks: clock-controller@30380000 {
 				compatible = "fsl,imx7d-ccm";
 				reg = <0x30380000 0x10000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
@@ -663,7 +665,7 @@ pgc_hsic_phy: power-domain@2 {
 			};
 		};
 
-		aips2: aips-bus@30400000 {
+		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -803,7 +805,7 @@ mipi_vc0_to_csi_mux: endpoint {
 			};
 		};
 
-		aips3: aips-bus@30800000 {
+		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -932,7 +934,7 @@ sai3: sai@308c0000 {
 				};
 			};
 
-			crypto: caam@30900000 {
+			crypto: crypto@30900000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -943,19 +945,19 @@ crypto: caam@30900000 {
 					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
 				clock-names = "ipg", "aclk";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr2: jr1@3000 {
+				sec_jr2: jr@3000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x3000 0x1000>;
 					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts
index a863a2b..eff51e1 100644
--- a/arch/arm/boot/dts/imx7ulp-evk.dts
+++ b/arch/arm/boot/dts/imx7ulp-evk.dts
@@ -72,7 +72,7 @@ &usbotg1 {
 	srp-disable;
 	hnp-disable;
 	adp-disable;
-	over-current-active-low;
+	disable-over-current;
 	status = "okay";
 };
 
@@ -110,7 +110,6 @@ IMX7ULP_PAD_PTC0__PTC0		0x20000
 	pinctrl_usbotg1_id: otg1idgrp {
 		fsl,pins = <
 			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
-			IMX7ULP_PAD_PTC16__USB1_OC2	0x10003
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index ab91c98..f7c4878 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -132,13 +132,13 @@ crypto: crypto@40240000 {
 				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
 			clock-names = "aclk", "ipg";
 
-			sec_jr0: jr0@1000 {
+			sec_jr0: jr@1000 {
 				compatible = "fsl,sec-v4.0-job-ring";
 				reg = <0x1000 0x1000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sec_jr1: jr1@2000 {
+			sec_jr1: jr@2000 {
 				compatible = "fsl,sec-v4.0-job-ring";
 				reg = <0x2000 0x1000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 94d2ff9..198d661 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -9,7 +9,6 @@
 / {
 	model = "ARM Integrator/AP";
 	compatible = "arm,integrator-ap";
-	dma-ranges = <0x80000000 0x0 0x80000000>;
 
 	cpus {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 51e1305..2093b38 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -148,7 +148,7 @@ syscfg_pctl_a: syscfg@10005000 {
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt2701-scpsys", "syscon";
 		#power-domain-cells = <1>;
 		reg = <0 0x10006000 0 0x1000>;
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a79f0b6..f76b4a3 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -268,7 +268,7 @@ syscfg_pctl_a: syscfg@10005000 {
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt7623-scpsys",
 			     "mediatek,mt2701-scpsys",
 			     "syscon";
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
index 867b881..5cbb3d24 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -90,7 +90,7 @@ pericfg: syscon@10002000 {
 			#clock-cells = <1>;
 		};
 
-		scpsys: scpsys@10006000 {
+		scpsys: power-controller@10006000 {
 			compatible = "mediatek,mt7629-scpsys",
 				     "mediatek,mt7622-scpsys";
 			#power-domain-cells = <1>;
@@ -241,6 +241,20 @@ uart2: serial@11004000 {
 			status = "disabled";
 		};
 
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt7629-pwm";
+			reg = <0x11006000 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM_PD>,
+				 <&pericfg CLK_PERI_PWM1_PD>;
+			clock-names = "top", "main", "pwm1";
+			assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
+			assigned-clock-parents =
+					<&topckgen CLK_TOP_UNIVPLL2_D4>;
+			status = "disabled";
+		};
+
 		i2c: i2c@11007000 {
 			compatible = "mediatek,mt7629-i2c",
 				     "mediatek,mt2712-i2c";
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi
index 4ec7909..bafd6ad 100644
--- a/arch/arm/boot/dts/omap5-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi
@@ -426,8 +426,20 @@ target-module@c0000 {			/* 0x401c0000, ap 30 1e.0 */
 		};
 
 		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf1000 0x4>,
+			      <0xf1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xf1000 0x1000>,
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 8b79b41..2687c4e 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -350,6 +350,7 @@ tlmm_pinmux: pinctrl@800000 {
 			reg = <0x800000 0x4000>;
 
 			gpio-controller;
+			gpio-ranges = <&tlmm_pinmux 0 0 90>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index fa1852e..bf6a035 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -403,6 +403,7 @@ tlmm: pinctrl@fd510000 {
 			compatible = "qcom,apq8084-pinctrl";
 			reg = <0xfd510000 0x4000>;
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 147>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 71bb25a..bfa9ce4 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -201,6 +201,7 @@ tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq4019-pinctrl";
 			reg = <0x01000000 0x300000>;
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 100>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 16c0da9..4021f66 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -119,6 +119,7 @@ qcom_pinmux: pinmux@800000 {
 			reg = <0x800000 0x4000>;
 
 			gpio-controller;
+			gpio-ranges = <&qcom_pinmux 0 0 69>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 356e953..347b4f7 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -128,6 +128,7 @@ timer@200a000 {
 		msmgpio: pinctrl@800000 {
 			compatible = "qcom,mdm9615-pinctrl";
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 88>;
 			#gpio-cells = <2>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index ec5cbc4..480fc08 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -115,6 +115,7 @@ tlmm: pinctrl@800000 {
 			reg = <0x800000 0x4000>;
 
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 173>;
 			#gpio-cells = <2>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index f2aeaccdc..172ea3c 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -107,6 +107,7 @@ timer@200a000 {
 		msmgpio: pinctrl@800000 {
 			compatible = "qcom,msm8960-pinctrl";
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 152>;
 			#gpio-cells = <2>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 3487daf..32b474b 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -12,6 +12,7 @@ / {
 
 	aliases {
 		serial0 = &blsp1_uart1;
+		serial1 = &blsp2_uart10;
 	};
 
 	chosen {
@@ -355,6 +356,57 @@ te {
 				bias-disable;
 			};
 		};
+
+		bt_pin: bt {
+			hostwake {
+				pins = "gpio42";
+				function = "gpio";
+			};
+
+			devwake {
+				pins = "gpio62";
+				function = "gpio";
+			};
+
+			shutdown {
+				pins = "gpio41";
+				function = "gpio";
+			};
+		};
+
+		blsp2_uart10_pin_a: blsp2-uart10-pin-active {
+			tx {
+				pins = "gpio53";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio54";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cts {
+				pins = "gpio55";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			rts {
+				pins = "gpio56";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
 	};
 
 	sdhci@f9824900 {
@@ -418,6 +470,25 @@ volume-down {
 		};
 	};
 
+	serial@f9960000 {
+		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp2_uart10_pin_a>;
+
+		bluetooth {
+			compatible = "brcm,bcm43438-bt";
+			max-speed = <3000000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&bt_pin>;
+
+			host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>;
+			device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	i2c@f9967000 {
 		status = "ok";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 450b832..611bae9 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -260,6 +260,31 @@ l24 {
 };
 
 &soc {
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		extcon = <&smbb>, <&usb_id>;
+		vbus-supply = <&chg_otg>;
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pm8941_l6>;
+				v3p3-supply = <&pm8941_l24>;
+
+				extcon = <&smbb>;
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
 	sdhci@f9824900 {
 		status = "ok";
 
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 4b161b8..2ea2308 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -715,6 +715,15 @@ blsp1_uart2: serial@f991e000 {
 			status = "disabled";
 		};
 
+		blsp2_uart10: serial@f9960000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf9960000 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		sdhci@f9824900 {
 			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -925,6 +934,7 @@ msmgpio: pinctrl@fd510000 {
 			compatible = "qcom,msm8974-pinctrl";
 			reg = <0xfd510000 0x4000>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 146>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index fe1a4aa..2562cc9 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -41,6 +41,9 @@ flash@18000000 {
 		bank-width = <4>;
 		device-width = <1>;
 
+		clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>;
+		power-domains = <&cpg_clocks>;
+
 		#address-cells = <1>;
 		#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 75b2796..0a567d8 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -467,11 +467,12 @@ mstp9_clks: mstp9_clks@fcfe0438 {
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0xfcfe0438 4>;
-			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
+			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>, <&b_clk>, <&b_clk>;
 			clock-indices = <
 				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
+				R7S72100_CLK_SPIBSC0 R7S72100_CLK_SPIBSC1
 			>;
-			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
+			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "spibsc0", "spibsc1";
 		};
 
 		mstp10_clks: mstp10_clks@fcfe043c {
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index a5351dd..b088e8e 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -157,11 +157,8 @@ vdd_dvfs: regulator@1b {
 
 &cpu0 {
 	cpu0-supply = <&vdd_dvfs>;
-	operating-points = <
-		/* kHz  uV */
-		1950000 1115000
-		1462500  995000
-	>;
+	operating-points = <1950000 1115000>,	/* kHz  uV */
+			   <1462500  995000>;
 	voltage-tolerance = <1>; /* 1% */
 };
 
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 1cd19a5..e8b340b 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1669,9 +1669,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 1c82dd0..def840b 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -1655,9 +1655,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index 2aeebfc..92aa26b 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -108,6 +108,12 @@ adv7511_out: endpoint {
 	};
 };
 
+&lcd_panel {
+	status = "disabled";
+
+	/delete-node/ port;
+};
+
 &pfc {
 	can1_pins: can1 {
 		groups = "can1_data_b";
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 58d369a..b15b1b0 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -30,6 +30,7 @@
 
 /dts-v1/;
 #include "r8a7745-iwg22m.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E";
@@ -78,6 +79,49 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 		gpios-states = <1>;
 		states = <3300000 1>, <1800000 0>;
 	};
+
+	vccq_panel: regulator-vccq-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "Panel VccQ";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	lcd_panel: lcd {
+		compatible = "edt,etm043080dh6gp";
+		power-supply = <&vccq_panel>;
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&du_out_rgb0>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&lcd_in>;
+			};
+		};
+	};
 };
 
 &avb {
@@ -127,6 +171,39 @@ &i2c5 {
 	status = "okay";
 	clock-frequency = <400000>;
 
+	stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+	};
+
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
@@ -149,11 +226,21 @@ avb_pins: avb {
 		function = "avb";
 	};
 
+	backlight_pins: backlight {
+		groups = "tpu_to3_c";
+		function = "tpu";
+	};
+
 	can0_pins: can0 {
 		groups = "can0_data";
 		function = "can0";
 	};
 
+	du0_pins: du0 {
+		groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
 	hscif1_pins: hscif1 {
 		groups = "hscif1_data", "hscif1_ctrl";
 		function = "hscif1";
@@ -229,6 +316,12 @@ &ssi4 {
 	shared-pin;
 };
 
+&tpu {
+	pinctrl-0 = <&backlight_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &usbphy {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 3f88a7e3..7ab58d8 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -1506,11 +1506,12 @@ vsp@fe930000 {
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7745";
 			reg = <0 0xfeb00000 0 0x40000>;
-			reg-names = "du";
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 6efcef1..f551531 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -942,9 +942,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 097fd93..69745de 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -674,6 +674,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index a315ba7..4138efb 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -203,6 +203,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 334ba19..e5ef9fd 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1719,6 +1719,8 @@ du: display@feb00000 {
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 722>;
 			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 2b096d5..687167b 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -633,6 +633,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index f9ece7a..a8e03351 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -307,6 +307,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 59a55e8..6e5bd86 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1681,9 +1681,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 39af16ca..4627eef 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -852,9 +852,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 22ca7cd..cfe06a7 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -591,6 +591,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index eef035c..dadbda1 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1341,9 +1341,10 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index f79fce7..935935c 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -343,6 +343,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 2c16ad8..9aaa96e 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -394,6 +394,7 @@ phy1: ethernet-phy@1 {
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 05ef79c..2c9e7a1 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1356,6 +1356,8 @@ du: display@feb00000 {
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index fb3cf00..2ff9f15 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -319,7 +319,7 @@ &sdio {
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
-	default-sample-phase = <90>;
+	rockchip,default-sample-phase = <90>;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index cf36e25..781ac75 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -54,7 +54,7 @@ cpu1: cpu@f01 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -101,7 +101,7 @@ xin24m: oscillator {
 		#clock-cells = <0>;
 	};
 
-	bus_intmem@10080000 {
+	bus_intmem: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x2000>;
 		#address-cells = <1>;
@@ -263,7 +263,7 @@ emmc: mmc@1021c000 {
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		default-sample-phase = <158>;
+		rockchip,default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
 		dma-names = "rx-tx";
@@ -281,8 +281,6 @@ i2s: i2s@10220000 {
 		compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
 		reg = <0x10220000 0x4000>;
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
 		dmas = <&pdma 0>, <&pdma 1>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 3d1b02f..b599394 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -156,14 +156,12 @@ i2s0: i2s@10118000 {
 		compatible = "rockchip,rk3066-i2s";
 		reg = <0x10118000 0x2000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac1_s 4>, <&dmac1_s 5>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 		rockchip,playback-channels = <8>;
 		rockchip,capture-channels = <2>;
 		#sound-dai-cells = <0>;
@@ -174,14 +172,12 @@ i2s1: i2s@1011a000 {
 		compatible = "rockchip,rk3066-i2s";
 		reg = <0x1011a000 0x2000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_bus>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
 		rockchip,playback-channels = <2>;
 		rockchip,capture-channels = <2>;
 		#sound-dai-cells = <0>;
@@ -192,14 +188,12 @@ i2s2: i2s@1011c000 {
 		compatible = "rockchip,rk3066-i2s";
 		reg = <0x1011c000 0x2000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2_bus>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac1_s 9>, <&dmac1_s 10>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
 		rockchip,playback-channels = <2>;
 		rockchip,capture-channels = <2>;
 		#sound-dai-cells = <0>;
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index ad1afd4..66a0ff1 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -58,20 +58,25 @@ gpio-poweroff {
 
 	lvds-encoder {
 		compatible = "ti,sn75lvds83", "lvds-encoder";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			lvds_in_vop0: endpoint {
-				remote-endpoint = <&vop0_out_lvds>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_in_vop0: endpoint {
+					remote-endpoint = <&vop0_out_lvds>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
-			lvds_out_panel: endpoint {
-				remote-endpoint = <&panel_in_lvds>;
+			port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
 			};
 		};
 	};
@@ -465,7 +470,7 @@ &mmc1 {
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
-	vmmcq-supply = <&vccio_wl>;
+	vqmmc-supply = <&vccio_wl>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 10ede65..2298a8d 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -166,14 +166,12 @@ i2s0: i2s@1011a000 {
 		compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
 		reg = <0x1011a000 0x2000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 		rockchip,playback-channels = <2>;
 		rockchip,capture-channels = <2>;
 		#sound-dai-cells = <0>;
@@ -184,8 +182,8 @@ spdif: sound@1011e000 {
 		compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
 		reg = <0x1011e000 0x2000>;
 		#sound-dai-cells = <0>;
-		clock-names = "hclk", "mclk";
-		clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
 		dmas = <&dmac1_s 8>;
 		dma-names = "tx";
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 4e90efd..06172eb 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -95,7 +95,7 @@ opp-1200000000 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -152,8 +152,6 @@ i2s1: i2s1@100b0000 {
 		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
 		reg = <0x100b0000 0x4000>;
 		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
 		dmas = <&pdma 14>, <&pdma 15>;
@@ -167,8 +165,6 @@ i2s0: i2s0@100c0000 {
 		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
 		reg = <0x100c0000 0x4000>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
 		dmas = <&pdma 11>, <&pdma 12>;
@@ -193,8 +189,6 @@ i2s2: i2s2@100e0000 {
 		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
 		reg = <0x100e0000 0x4000>;
 		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
 		dmas = <&pdma 0>, <&pdma 1>;
@@ -698,7 +692,7 @@ emmc: mmc@30020000 {
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		bus-width = <8>;
-		default-sample-phase = <158>;
+		rockchip,default-sample-phase = <158>;
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
@@ -718,7 +712,6 @@ usb_otg: usb@30040000 {
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy0_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -729,7 +722,6 @@ usb_host0_ehci: usb@30080000 {
 		reg = <0x30080000 0x20000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy0>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -740,7 +732,6 @@ usb_host0_ohci: usb@300a0000 {
 		reg = <0x300a0000 0x20000>;
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy0>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -751,7 +742,6 @@ usb_host1_ehci: usb@300c0000 {
 		reg = <0x300c0000 0x20000>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST1>, <&u2phy1>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy1_otg>;
 		phy-names = "usb";
 		status = "disabled";
@@ -762,7 +752,6 @@ usb_host1_ohci: usb@300e0000 {
 		reg = <0x300e0000 0x20000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST1>, <&u2phy1>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy1_otg>;
 		phy-names = "usb";
 		status = "disabled";
@@ -775,7 +764,6 @@ usb_host2_ehci: usb@30100000 {
 		clocks = <&cru HCLK_HOST2>, <&u2phy1>;
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
-		clock-names = "usbhost", "utmi";
 		status = "disabled";
 	};
 
@@ -784,7 +772,6 @@ usb_host2_ohci: usb@30120000 {
 		reg = <0x30120000 0x20000>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST2>, <&u2phy1>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 8008076..be695b8 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -4,6 +4,7 @@
 #include "rk3288-evb.dtsi"
 
 / {
+	model = "Rockchip RK3288 EVB ACT8846";
 	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
 
 	vcc_lcd: vcc-lcd {
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 1678820..42384ea 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -4,6 +4,7 @@
 #include "rk3288-evb.dtsi"
 
 / {
+	model = "Rockchip RK3288 EVB RK808";
 	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
 };
 
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 1574383..8c38bda 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -234,6 +234,7 @@ &i2s {
 };
 
 &saradc {
+	vref-supply = <&vcc_18>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index a6ffc38..a258c7a 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -9,6 +9,7 @@
 #include "rk3288.dtsi"
 
 / {
+	model = "Netxeon R89";
 	compatible = "netxeon,r89", "rockchip,rk3288";
 
 	memory@0 {
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 312582c..acfaa12 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -276,6 +276,7 @@ regulator-state-mem {
 			};
 
 			vccio_sd: LDO_REG5 {
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index ba06e9f..385dd59 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -78,6 +78,18 @@ vsus_5v: vsus-5v {
 		vin-supply = <&vcc_io>;
 	};
 
+	vcc50_hdmi: vcc50-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc50_hdmi";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc50_hdmi_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
 	vusb1_5v: vusb1-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vusb1_5v";
@@ -150,7 +162,7 @@ &gpu {
 };
 
 &hdmi {
-	ddc-i2c-bus = <&i2c2>;
+	ddc-i2c-bus = <&i2c5>;
 	status = "okay";
 };
 
@@ -286,15 +298,15 @@ regulator-state-mem {
 				};
 			};
 
-			vcc10_lcd: LDO_REG6 {
-				regulator-name = "vcc10_lcd";
+			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
+					regulator-suspend-microvolt = <1000000>;
 				};
 			};
 
@@ -347,7 +359,7 @@ regulator-state-mem {
 	};
 };
 
-&i2c2 {
+&i2c5 {
 	status = "okay";
 };
 
@@ -446,6 +458,12 @@ phy_rst: phy-rst {
 		};
 	};
 
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 9beb662..0cd8877 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -155,7 +155,7 @@ opp-1608000000 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -420,6 +420,8 @@ uart0: serial@ff180000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 1>, <&dmac_peri 2>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_xfer>;
 		status = "disabled";
@@ -433,6 +435,8 @@ uart1: serial@ff190000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 3>, <&dmac_peri 4>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart1_xfer>;
 		status = "disabled";
@@ -459,6 +463,8 @@ uart3: serial@ff1b0000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 7>, <&dmac_peri 8>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart3_xfer>;
 		status = "disabled";
@@ -472,6 +478,8 @@ uart4: serial@ff1c0000 {
 		reg-io-width = <4>;
 		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
 		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 9>, <&dmac_peri 10>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart4_xfer>;
 		status = "disabled";
@@ -601,7 +609,6 @@ usb_host0_ehci: usb@ff500000 {
 		reg = <0x0 0xff500000 0x0 0x100>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_USBHOST0>;
-		clock-names = "usbhost";
 		phys = <&usbphy1>;
 		phy-names = "usb";
 		status = "disabled";
@@ -644,7 +651,6 @@ usb_hsic: usb@ff5c0000 {
 		reg = <0x0 0xff5c0000 0x0 0x100>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HSIC>;
-		clock-names = "usbhost";
 		status = "disabled";
 	};
 
@@ -718,7 +724,7 @@ pwm3: pwm@ff680030 {
 		status = "disabled";
 	};
 
-	bus_intmem@ff700000 {
+	bus_intmem: sram@ff700000 {
 		compatible = "mmio-sram";
 		reg = <0x0 0xff700000 0x0 0x18000>;
 		#address-cells = <1>;
@@ -730,7 +736,7 @@ smp-sram@0 {
 		};
 	};
 
-	sram@ff720000 {
+	pmu_sram: sram@ff720000 {
 		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
 		reg = <0x0 0xff720000 0x0 0x1000>;
 	};
@@ -946,8 +952,8 @@ spdif: sound@ff88b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
-		clock-names = "hclk", "mclk";
-		clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+		clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>;
+		clock-names = "mclk", "hclk";
 		dmas = <&dmac_bus_s 3>;
 		dma-names = "tx";
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -962,12 +968,10 @@ i2s: i2s@ff890000 {
 		reg = <0x0 0xff890000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+		clock-names = "i2s_clk", "i2s_hclk";
 		dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
 		dma-names = "tx", "rx";
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
 		rockchip,playback-channels = <8>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 241f43e..f9fcb7e9 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -32,7 +32,7 @@ aliases {
 		spi1 = &spi1;
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,7 +91,7 @@ gpu: gpu@10090000 {
 		status = "disabled";
 	};
 
-	L2: l2-cache-controller@10138000 {
+	L2: cache-controller@10138000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x10138000 0x1000>;
 		cache-unified;
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 1fd06e7..f9cfe2c 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -85,7 +85,7 @@ xin24m: oscillator {
 		#clock-cells = <0>;
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -102,7 +102,7 @@ pdma: pdma@102a0000 {
 		};
 	};
 
-	bus_intmem@10080000 {
+	bus_intmem: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x2000>;
 		#address-cells = <1>;
@@ -120,7 +120,6 @@ uart2: serial@10210000 {
 		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&pdma 6>, <&pdma 7>;
-		#dma-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart2m0_xfer>;
 		status = "disabled";
@@ -136,7 +135,6 @@ uart1: serial@10220000 {
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&pdma 4>, <&pdma 5>;
-		#dma-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart1_xfer>;
 		status = "disabled";
@@ -152,7 +150,6 @@ uart0: serial@10230000 {
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&pdma 2>, <&pdma 3>;
-		#dma-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 		status = "disabled";
@@ -208,7 +205,6 @@ spi: spi@10270000 {
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&pdma 8>, <&pdma 9>;
 		dma-names = "tx", "rx";
-		#dma-cells = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -370,7 +366,6 @@ adc: adc@1038c000 {
 		reg = <0x1038c000 0x100>;
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
-		clock-frequency = <1000000>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
 		status = "disabled";
@@ -499,7 +494,6 @@ usb_host_ehci: usb@30140000 {
 		reg = <0x30140000 0x20000>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -510,7 +504,6 @@ usb_host_ohci: usb@30160000 {
 		reg = <0x30160000 0x20000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -527,7 +520,6 @@ usb_otg: usb@30180000 {
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index 326b393..6763423 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -686,6 +686,14 @@ rtc: rtc@fffffea8 {
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&clk32k 0>;
 			};
+
+			watchdog: watchdog@ffffff80 {
+				compatible = "microchip,sam9x60-wdt";
+				reg = <0xffffff80 0x24>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 2012b74..ab550d6 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -695,7 +695,7 @@ clk32k: sckc@f8048050 {
 			};
 
 			rtc: rtc@f80480b0 {
-				compatible = "atmel,at91rm9200-rtc";
+				compatible = "atmel,sama5d2-rtc";
 				reg = <0xf80480b0 0x30>;
 				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&clk32k>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 203d40b..f11b018 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -159,8 +159,11 @@ i2c0: i2c@f0014000 {
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
 				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi0_clk>;
@@ -174,8 +177,11 @@ i2c1: i2c@f0018000 {
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
 				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi1_clk>;
@@ -357,8 +363,11 @@ i2c2: i2c@f801c000 {
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
 				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&twi2_clk>;
@@ -639,6 +648,12 @@ pinctrl_i2c0: i2c0-0 {
 							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
 							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
 					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				i2c1 {
@@ -647,6 +662,12 @@ pinctrl_i2c1: i2c1-0 {
 							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
 							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
 					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				i2c2 {
@@ -655,6 +676,12 @@ pinctrl_i2c2: i2c2-0 {
 							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
 							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
 					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				isi {
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 6ab27a7..c9c0316 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -458,8 +458,11 @@ i2c0: i2c@f8014000 {
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
 					| AT91_XDMAC_DT_PERID(3))>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
@@ -477,8 +480,11 @@ i2c1: i2c@f8018000 {
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
 					| AT91_XDMAC_DT_PERID(5))>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
@@ -519,8 +525,11 @@ i2c2: i2c@f8024000 {
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
 					| AT91_XDMAC_DT_PERID(7))>;
 				dma-names = "tx", "rx";
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
@@ -884,7 +893,7 @@ clk32k: sckc@fc068650 {
 			};
 
 			rtc@fc0686b0 {
-				compatible = "atmel,at91rm9200-rtc";
+				compatible = "atmel,sama5d4-rtc";
 				reg = <0xfc0686b0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&clk32k>;
@@ -1122,6 +1131,12 @@ pinctrl_i2c0: i2c0-0 {
 							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
 							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				i2c1 {
@@ -1130,6 +1145,12 @@ pinctrl_i2c1: i2c1-0 {
 							<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* TWD1, conflicts with UART0 RX and DIBP */
 							 AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* TWCK1, conflicts with UART0 TX and DIBN */
 					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				i2c2 {
@@ -1138,6 +1159,12 @@ pinctrl_i2c2: i2c2-0 {
 							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* TWD2, conflicts with RD0 and PWML1 */
 							 AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
 					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 
 				isi {
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 1916f31..5a8d92a 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -25,12 +25,9 @@ aliases {
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vdd_dvfs>;
-			operating-points = <
-				/* kHz  uV */
-				1196000 1315000
-				 598000 1175000
-				 398667 1065000
-			>;
+			operating-points = <1196000 1315000>,	/* kHz  uV */
+					   < 598000 1175000>,
+					   < 398667 1065000>;
 			voltage-tolerance = <1>; /* 1% */
 		};
 	};
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 2a86e72..3b8571b 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -431,8 +431,8 @@ gmac0: ethernet@ff800000 {
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <16384>;
-			clocks = <&l4_mp_clk>;
-			clock-names = "stmmaceth";
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
@@ -451,8 +451,8 @@ gmac1: ethernet@ff802000 {
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <16384>;
-			clocks = <&l4_mp_clk>;
-			clock-names = "stmmaceth";
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
@@ -471,8 +471,8 @@ gmac2: ethernet@ff804000 {
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <16384>;
-			clocks = <&l4_mp_clk>;
-			clock-names = "stmmaceth";
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
index 9bd9e04..9aa897b 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
@@ -16,11 +16,11 @@ nand@0 {
 
 		partition@0 {
 			label = "Boot and fpga data";
-			reg = <0x0 0x1C00000>;
+			reg = <0x0 0x02000000>;
 		};
 		partition@1c00000 {
 			label = "Root Filesystem - JFFS2";
-			reg = <0x1C00000 0x6400000>;
+			reg = <0x02000000 0x06000000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 14d4d86..3cd6ee6 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -314,13 +314,13 @@ sound {
 		mcde@a0350000 {
 			vana-supply = <&ab8500_ldo_ana_reg>;
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi@a0352000 {
+			dsi-controller@a0352000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi@a0353000 {
+			dsi-controller@a0353000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index c72aa25..67bc69e 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -261,13 +261,13 @@ sound {
 		mcde@a0350000 {
 			vana-supply = <&ab8500_ldo_ana_reg>;
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi@a0352000 {
+			dsi-controller@a0352000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
-			dsi@a0353000 {
+			dsi-controller@a0353000 {
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 6671f74..3e10da3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1097,7 +1097,7 @@ mcde@a0350000 {
 			ranges;
 			status = "disabled";
 
-			dsi0: dsi@a0351000 {
+			dsi0: dsi-controller@a0351000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0351000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
@@ -1105,7 +1105,7 @@ dsi0: dsi@a0351000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi1: dsi@a0352000 {
+			dsi1: dsi-controller@a0352000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0352000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
@@ -1113,7 +1113,7 @@ dsi1: dsi@a0352000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi2: dsi@a0353000 {
+			dsi2: dsi-controller@a0353000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0353000 0x1000>;
 				/* This DSI port only has the Low Power / Energy Save clock */
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index e32d0c36..b8fd8f1 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -199,7 +199,7 @@ stuib_cfg2 {
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "samsung,s6d16d0";
 					reg = <0>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
index e024520..de82b9d 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
@@ -66,7 +66,7 @@ lis331dl@1c {
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "samsung,s6d16d0";
 					reg = <0>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index cb3677f..9f285c7 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -45,7 +45,7 @@ lis3dh@18 {
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "sony,acx424akp";
 					reg = <0>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
new file mode 100644
index 0000000..292ed52
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung XCover 2 GT-S7710 also known as Skomer.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung XCover 2 (GT-S7710)";
+	compatible = "samsung,skomer", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	wlan_en: regulator-gpio-wlan-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <200000>;
+		/* GPIO215 WLAN_EN */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default_mode>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+		button-menu {
+			linux,code = <KEY_MENU>;
+			label = "MENU";
+			/* GPIO204 */
+			gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+		};
+		button-back {
+			linux,code = <KEY_BACK>;
+			label = "BACK";
+			/* GPIO205 */
+			gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * FIXME: this is not quite GPIO backlight. This is a
+	 * KTD253 one-wire GPIO-controlled backlight. It can
+	 * work as a GPIO backlight.
+	 */
+	gpio_bl: backlight {
+		compatible = "gpio-backlight";
+		/* GPIO 69 */
+		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_backlight_default_mode>;
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: this should be used by the NCP6914 Camera power management unit */
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: this should be used by the ALPS HSCDTD008A compass sensor */
+	};
+
+	soc {
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			/* All direction control is used */
+			st,sig-dir-cmd;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_1_default>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			vmmc-supply = <&wlan_en>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		// eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			/* FIXME: not quite working yet, probably needs regulators */
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+		};
+
+		/* Debugging console UART connected to AB8505 USB */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8505-regulators {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "AUX1";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Supplies the Cypress TMA140 touchscreen only with 3.3V */
+						regulator-name = "AUX2";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "AUX3";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "AUX4";
+						/* Hammer to 3.0V for the display */
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "AUX5";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+						regulator-always-on;
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "AUX6";
+						/* Hammer to 1.8V for the display */
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux8 {
+						/* Mostly VIO for sensors */
+						regulator-name = "AUX8";
+					};
+				};
+			};
+		};
+
+		/* I2C0 */
+		i2c@80004000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@44 {
+				compatible = "sharp,gp2ap002s00f";
+				clock-frequency = <400000>;
+				reg = <0x44>;
+
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gp2ap002_skomer_default>;
+				sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
+				sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+			};
+		};
+
+
+		/* I2C2 */
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			accel@18 {
+				compatible = "bosch,bma254";
+				clock-frequency = <400000>;
+				reg = <0x18>;
+
+				/* GPIO224 used as "smart alert" interrupt */
+				interrupt-parent = <&gpio7>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+				mount-matrix = "0", "1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "1";
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bma254_skomer_default>;
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* TODO: this should be used by the Cypress TMA140 touchscreen */
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dsi_default_mode>;
+
+			dsi-controller@a0351000 {
+				panel {
+					/* NT35510-based Hydis HVA40WV1 */
+					compatible = "hydis,hva40wv1", "novatek,nt35510";
+					reg = <0>;
+					/* v_lcd_3v0 2.3-4.8V */
+					vdd-supply = <&ab8500_ldo_aux4_reg>;
+					/* v_lcd_1v8 1.65-3.3V */
+					vddi-supply = <&ab8500_ldo_aux6_reg>;
+					/* GPIO 139 */
+					reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&display_default_mode>;
+					backlight = <&gpio_bl>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0 default config to include DAT32DIR
+	 * which is used by this machine. If we don't do this the
+	 * SD card does not work.
+	 */
+	sdi0 {
+		mc0_a_1_default {
+			default_mux {
+				function = "mc0";
+				/* This machine uses the DAT31 pin */
+				groups = "mc0_a_1", "mc0dat31dir_a_1";
+			};
+			default_cfg5 {
+				pins = "GPIO21_AB3"; /* DAT31DIR */
+				ste,config = <&out_hi>;
+			};
+		};
+	};
+
+	mcde {
+		dsi_default_mode: dsi_default {
+			default_mux1 {
+				/* Mux in VSI0 used for DSI TE */
+				function = "lcd";
+				groups = "lcdvsi0_a_1"; /* VSI0 for LCD */
+			};
+			default_cfg1 {
+				pins = "GPIO68_E1"; /* VSI0 */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	/* Two GPIO lines used by the display */
+	display {
+		display_default_mode: display_default {
+			skomer_cfg1 {
+				/*
+				 * OLED DETECT or check_pba, this appears to be high
+				 * on "PBA" which I guess is "prototype board A".
+				 */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+			skomer_cfg2 {
+				pins = "GPIO139_C9";
+				/*
+				 * MIPI_DSI0_RESET_N resets the display, leave high
+				 * (de-asserted) so we only assert reset explicitly
+				 * from the display driver.
+				 */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	backlight {
+		gpio_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			skomer_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			skomer_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6", /* VOL DOWN */
+				       "GPIO204_AF23", /* MENU */
+				       "GPIO205_AG23"; /* BACK */
+					ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for BMA254 */
+	bma254 {
+		bma254_skomer_default: bma254_skomer {
+			skomer_cfg1 {
+				pins = "GPIO224_AG9";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor GP2AP002 */
+	gp2ap002 {
+		gp2ap002_skomer_default: gp2ap002_skomer {
+			skomer_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for NCP6914 */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			skomer_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for ALPS HSCD compass */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			skomer_cfg1 {
+				pins = "GPIO151_B17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			skomer_cfg1 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		wlan_en_default_mode: wlan_en_default {
+			skomer_cfg2 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			skomer_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			skomer_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			skomer_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			skomer_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			skomer_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index fcc804e..4ea3f98 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -165,7 +165,7 @@ stmfx: stmfx@42 {
 		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gpioi>;
 
-		stmfx_pinctrl: stmfx-pin-controller {
+		stmfx_pinctrl: pinctrl {
 			compatible = "st,stmfx-0300-pinctrl";
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 0237d4d..73c07f0 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -162,6 +162,40 @@ pins1 {
 		};
 	};
 
+	ethernet0_rmii_pins_a: rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF0)>,   /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rmii_pins_sleep_a: rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
 	fmc_pins_a: fmc-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
@@ -685,6 +719,26 @@ pins {
 		};
 	};
 
+
+	sai2a_pins_b: sai2a-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('I', 6, AF10)>,	/* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>,	/* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, AF10)>;	/* SAI2_SCK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_b: sai2a-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 6, ANALOG)>,  /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>,  /* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */
+		};
+	};
+
 	sai2b_pins_a: sai2b-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
@@ -1000,6 +1054,19 @@ pins {
 		};
 	};
 
+	usart3_pins_a: usart3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
 	uart4_pins_a: uart4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
@@ -1040,6 +1107,32 @@ pins2 {
 			bias-disable;
 		};
 	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	usbotg_hs_pins_a: usbotg-hs-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
+		};
+	};
+
+	usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
+		};
+	};
 };
 
 &pinctrl_z {
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index fb41d07..3ea05ba 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -17,6 +17,7 @@ cpus {
 
 		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
 			device_type = "cpu";
 			reg = <0>;
 		};
@@ -483,6 +484,7 @@ i2c1: i2c@40012000 {
 			resets = <&rcc I2C1_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -496,6 +498,7 @@ i2c2: i2c@40013000 {
 			resets = <&rcc I2C2_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -509,6 +512,7 @@ i2c3: i2c@40014000 {
 			resets = <&rcc I2C3_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -522,6 +526,7 @@ i2c5: i2c@40015000 {
 			resets = <&rcc I2C5_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -959,6 +964,7 @@ dma1: dma-controller@48000000 {
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
 			#dma-cells = <4>;
 			st,mem2mem;
 			dma-requests = <8>;
@@ -976,6 +982,7 @@ dma2: dma-controller@48001000 {
 				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
 			#dma-cells = <4>;
 			st,mem2mem;
 			dma-requests = <8>;
@@ -989,6 +996,7 @@ dmamux1: dma-router@48002000 {
 			dma-masters = <&dma1 &dma2>;
 			dma-channels = <16>;
 			clocks = <&rcc DMAMUX>;
+			resets = <&rcc DMAMUX_R>;
 		};
 
 		adc: adc@48003000 {
@@ -1044,7 +1052,7 @@ sdmmc3: sdmmc@48004000 {
 		};
 
 		usbotg_hs: usb-otg@49000000 {
-			compatible = "snps,dwc2";
+			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
 			reg = <0x49000000 0x10000>;
 			clocks = <&rcc USBO_K>;
 			clock-names = "otg";
@@ -1055,6 +1063,7 @@ usbotg_hs: usb-otg@49000000 {
 			g-np-tx-fifo-size = <32>;
 			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
 			dr_mode = "otg";
+			usb33d-supply = <&usb33>;
 			status = "disabled";
 		};
 
@@ -1280,6 +1289,7 @@ mdma1: dma-controller@58000000 {
 			reg = <0x58000000 0x1000>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc MDMA>;
+			resets = <&rcc MDMA_R>;
 			#dma-cells = <5>;
 			dma-channels = <32>;
 			dma-requests = <48>;
@@ -1369,10 +1379,12 @@ ethernet0: ethernet@5800a000 {
 			clock-names = "stmmaceth",
 				      "mac-clk-tx",
 				      "mac-clk-rx",
+				      "eth-ck",
 				      "ethstp";
 			clocks = <&rcc ETHMAC>,
 				 <&rcc ETHTX>,
 				 <&rcc ETHRX>,
+				 <&rcc ETHCK_K>,
 				 <&rcc ETHSTP>;
 			st,syscon = <&syscfg 0x4>;
 			snps,mixed-burst;
@@ -1473,6 +1485,7 @@ i2c4: i2c@5c002000 {
 			resets = <&rcc I2C4_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -1508,6 +1521,7 @@ i2c6: i2c@5c009000 {
 			resets = <&rcc I2C6_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			wakeup-source;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
index 2d759fc..6d9ab08 100644
--- a/arch/arm/boot/dts/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -10,6 +10,7 @@ / {
 	cpus {
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
 			device_type = "cpu";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index cbfa407..425175f 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -135,10 +135,6 @@ pmic: stpmic@33 {
 		#interrupt-cells = <2>;
 		status = "okay";
 
-		st,main-control-register = <0x04>;
-		st,vin-control-register = <0xc0>;
-		st,usb-control-register = <0x30>;
-
 		regulators {
 			compatible = "st,stpmic1-regulators";
 
@@ -173,7 +169,6 @@ vdd: buck3 {
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
-				st,mask_reset;
 				regulator-initial-mode = <0>;
 				regulator-over-current-protection;
 			};
@@ -213,8 +208,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 				interrupt-parent = <&pmic>;
 			};
@@ -240,7 +233,6 @@ v1v8: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -300,7 +292,8 @@ &sdmmc1 {
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
 	st,sig-dir;
 	st,neg-edge;
 	st,use-ckin;
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
new file mode 100644
index 0000000..af99e13
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp157c-dhcom-som.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)";
+	compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart8;
+		ethernet0 = &ethernet0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	ethernet_vio: vioregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		backlight = <&display_bl>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		routing =
+			"MIC_IN", "Capture",
+			"Capture", "Mic Bias",
+			"Playback", "HP_OUT";
+		dais = <&sai2a_port &sai2b_port>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0>;
+	st,eth-ref-clk-sel;
+	phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&v3v3>;
+		VDDIO-supply = <&vdd>;
+
+		sgtl5000_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sgtl5000_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			sgtl5000_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+		};
+
+	};
+
+	polytouch@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpiog>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		linux,wakeup;
+	};
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_b>;
+	pinctrl-1 = <&ltdc_pins_sleep_b>;
+	status = "okay";
+
+	port {
+		lcd_display_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_a>;
+	pinctrl-1 = <&m_can1_sleep_pins_a>;
+	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&sgtl5000_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <512>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&sgtl5000_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <512>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+};
+
+&timers2 {
+	/* spare dmas for other usage (un-delete to enable pwm capture) */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+	pwm2: pwm {
+		pinctrl-0 = <&pwm2_pins_a>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
new file mode 100644
index 0000000..f81dc31
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,min-sample-time-nsecs = <5000>;
+		st,adc-channels = <0>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <1>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	dac1: dac@1 {
+		status = "okay";
+	};
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	touchscreen@49 {
+		compatible = "ti,tsc2004";
+		reg = <0x49>;
+		vio-supply = <&v3v3>;
+		interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: mx66l51235l@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	broken-cd;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 1fc4325..9d2592d 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -130,10 +130,12 @@ &gpu {
 };
 
 &i2c4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_pins_sleep_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
 	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
@@ -218,8 +220,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -241,7 +241,6 @@ v1v8: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -313,7 +312,8 @@ &sdmmc1 {
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
 	st,sig-dir;
 	st,neg-edge;
 	st,use-ckin;
@@ -334,7 +334,7 @@ &sdmmc2 {
 	st,neg-edge;
 	bus-width = <8>;
 	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
 	mmc-ddr-3_3v;
 	status = "okay";
 };
@@ -355,6 +355,10 @@ &uart4 {
 	status = "okay";
 };
 
+&usbotg_hs {
+	vbus-supply = <&vbus_otg>;
+};
+
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
 	vdda1v1-supply = <&reg11>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 228e35e..8a4c7ff 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -174,8 +174,9 @@ nand@0 {
 };
 
 &i2c2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_pins_sleep_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
@@ -210,7 +211,7 @@ stmfx: stmfx@42 {
 		interrupt-parent = <&gpioi>;
 		vdd-supply = <&v3v3>;
 
-		stmfx_pinctrl: stmfx-pin-controller {
+		stmfx_pinctrl: pinctrl {
 			compatible = "st,stmfx-0300-pinctrl";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -218,7 +219,7 @@ stmfx_pinctrl: stmfx-pin-controller {
 			#interrupt-cells = <2>;
 			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
 
-			joystick_pins: joystick {
+			joystick_pins: joystick-pins {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
 				bias-pull-down;
 			};
@@ -227,8 +228,9 @@ joystick_pins: joystick {
 };
 
 &i2c5 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_pins_sleep_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
@@ -353,7 +355,8 @@ &usbh_ehci {
 };
 
 &usbotg_hs {
-	dr_mode = "peripheral";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
 	phys = <&usbphyc_port1 0>;
 	phy-names = "usb2-phy";
 	status = "okay";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index f6672e8..d946e0a 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -216,10 +216,12 @@ cs42l51_rx_endpoint: endpoint@1 {
 };
 
 &i2c4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_pins_sleep_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
 	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
@@ -304,8 +306,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -328,7 +328,6 @@ v1v2_hdmi: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			 bst_out: boost {
@@ -479,7 +478,8 @@ &sdmmc1 {
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
 	vmmc-supply = <&v3v3>;
diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
new file mode 100644
index 0000000..e9ef97c
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2019 Ondrej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PocketBook Touch Lux 3";
+	compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		label = "GPIO Keys";
+
+		key-right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
+		};
+
+		key-left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-1v8-nor-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8_nor: regulator-nor {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-nor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+		regulator-always-on;
+	};
+
+	reg_1v8_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* Touchpanel is connected here. */
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+	/* We need this otherwise the LDO3 would overload */
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
+	status = "okay";
+
+	epd_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25u4033", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 0b526e6e..7f5cf02 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -771,9 +771,6 @@ be0: display-backend@1e60000 {
 			interconnect-names = "dma-mem";
 			status = "disabled";
 
-			assigned-clocks = <&ccu CLK_DE_BE>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 7762fbd..f3425a6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -1139,9 +1139,6 @@ be1: display-backend@1e40000 {
 				      "ram";
 			resets = <&ccu RST_AHB1_BE1>;
 
-			assigned-clocks = <&ccu CLK_BE1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1185,9 +1182,6 @@ drc1: drc@1e50000 {
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC1>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1231,9 +1225,6 @@ be0: display-backend@1e60000 {
 				      "ram";
 			resets = <&ccu RST_AHB1_BE0>;
 
-			assigned-clocks = <&ccu CLK_BE0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1274,9 +1265,6 @@ drc0: drc@1e70000 {
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC0>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 0000000..da5a2ee
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 92b5be9..ffe1d10 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/clock/sun7i-a20-ccu.h>
 #include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -404,11 +405,12 @@ mdio: mdio@1c0b080 {
 		};
 
 		tcon0: lcd-controller@1c0c000 {
-			compatible = "allwinner,sun7i-a20-tcon";
+			compatible = "allwinner,sun7i-a20-tcon0",
+				     "allwinner,sun7i-a20-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_TCON0>;
-			reset-names = "lcd";
+			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB_LCD0>,
 				 <&ccu CLK_TCON0_CH0>,
 				 <&ccu CLK_TCON0_CH1>;
@@ -454,7 +456,8 @@ tcon0_out_hdmi: endpoint@1 {
 		};
 
 		tcon1: lcd-controller@1c0d000 {
-			compatible = "allwinner,sun7i-a20-tcon";
+			compatible = "allwinner,sun7i-a20-tcon1",
+				     "allwinner,sun7i-a20-tcon";
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&ccu RST_TCON1>;
@@ -932,6 +935,20 @@ ir1_tx_pin: ir1-tx-pin {
 			};
 
 			/omit-if-no-ref/
+			lcd_lvds0_pins: lcd-lvds0-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds1_pins: lcd-lvds1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+			};
+
+			/omit-if-no-ref/
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 48487f6..c1362d0 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -684,9 +684,6 @@ drc0: drc@1e70000 {
 			clock-names = "ahb", "mod", "ram";
 			resets = <&ccu RST_BUS_DRC>;
 
-			assigned-clocks = <&ccu CLK_DRC>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 1532a0e..d80c8a6 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -372,8 +372,6 @@ &be0 {
 		      "ram", "sat";
 	resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
 	reset-names = "be", "sat";
-	assigned-clocks = <&ccu CLK_DE_BE>;
-	assigned-clock-rates = <300000000>;
 };
 
 &ccu {
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 2fd31a0..4ab4568 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -493,7 +493,6 @@ gnss {
 };
 
 &usb_otg {
-	dr_mode = "otg";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 74ac7ee..ff29458 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -72,7 +72,7 @@ cpu0: cpu@0 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -83,7 +83,7 @@ cpu@1 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -94,7 +94,7 @@ cpu@2 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -116,7 +116,7 @@ cpu100: cpu@100 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@101 {
+		cpu101: cpu@101 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -127,7 +127,7 @@ cpu@101 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@102 {
+		cpu102: cpu@102 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -138,7 +138,7 @@ cpu@102 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@103 {
+		cpu103: cpu@103 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -314,7 +314,7 @@ soc {
 
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-a83t-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_PLL_DE>;
 			clock-names = "bus",
@@ -324,6 +324,17 @@ display_clocks: clock@1000000 {
 			#reset-cells = <1>;
 		};
 
+		rotate: rotate@1020000 {
+			compatible = "allwinner,sun8i-a83t-de2-rotate";
+			reg = <0x1020000 0x10000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&display_clocks CLK_BUS_ROT>,
+				 <&display_clocks CLK_ROT>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_ROT>;
+		};
+
 		mixer0: mixer@1100000 {
 			compatible = "allwinner,sun8i-a83t-de2-mixer-0";
 			reg = <0x01100000 0x100000>;
@@ -1188,12 +1199,60 @@ cpu0_thermal: cpu0-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu1_thermal: cpu1-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				cpu1_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal: gpu-thermal {
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 20217e2..e83aa686 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -41,6 +41,7 @@
  */
 
 #include "sunxi-h3-h5.dtsi"
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	cpu0_opp_table: opp_table0 {
@@ -227,6 +228,30 @@ cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 8f09a24..b2dd00a 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/clock/sun8i-tcon-top.h>
 #include <dt-bindings/reset/sun8i-r40-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	#address-cells = <1>;
@@ -110,6 +111,22 @@ de: display-engine {
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu_thermal: gpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -119,7 +136,7 @@ soc {
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-r40-de2-clk",
 				     "allwinner,sun8i-h3-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
@@ -500,6 +517,17 @@ wdt: watchdog@1c20c90 {
 			clocks = <&osc24M>;
 		};
 
+		ths: thermal-sensor@1c24c00 {
+			compatible = "allwinner,sun8i-r40-ths";
+			reg = <0x01c24c00 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			/* TODO: add nvmem-cells for calibration */
+			#thermal-sensor-cells = <1>;
+		};
+
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 81ea508..e531286 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -105,7 +105,7 @@ soc {
 
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-v3s-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 5e9c306..d551601 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -114,7 +114,7 @@ soc {
 
 		display_clocks: clock@1000000 {
 			/* compatible is in per SoC .dtsi file */
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
@@ -892,6 +892,21 @@ r_i2c_pins: r-i2c-pins {
 				pins = "PL0", "PL1";
 				function = "s_i2c";
 			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01f03800 0x8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 97a5c35..d3e032e 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1296,7 +1296,13 @@ sound {
 
 		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
 			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA114_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA114_CLK_EXTERN1>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 0d7a632..450a1f1 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra114-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra114";
@@ -514,11 +515,12 @@ kbc@7000e200 {
 		status = "disabled";
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra114-pmc";
 		reg = <0x7000e400 0x400>;
 		clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	fuse@7000f800 {
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 0462ed2..de499f7 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -2009,8 +2009,14 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index d1e8593..d70a86d 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -2001,8 +2001,14 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index d5fd642..1b567e2 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1782,12 +1782,6 @@ sata-0 {
 		};
 
 		ports {
-			/* Micro A/B */
-			usb2-0 {
-				status = "okay";
-				mode = "otg";
-			};
-
 			/* Mini PCIe */
 			usb2-1 {
 				status = "okay";
@@ -2058,8 +2052,14 @@ sound {
 
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 3b10f47..9b1af50 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -788,9 +788,15 @@ sound {
 
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
 		nvidia,mic-det-gpios =
 				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 7309393..8c2ee6e 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -1266,8 +1266,14 @@ sound {
 
 		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 7f330b1..94cac13 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/tegra124-car.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra124";
@@ -595,11 +596,12 @@ rtc@7000e000 {
 		clocks = <&tegra_car TEGRA124_CLK_RTC>;
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra124-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	fuse@7000f800 {
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9c58e7f..c3b8ad5 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra20-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra20";
@@ -608,11 +609,12 @@ kbc@7000e200 {
 		status = "disabled";
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra20-pmc";
 		reg = <0x7000e400 0x400>;
 		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	mc: memory-controller@7000f000 {
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 8b7a827..387b174 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -1189,7 +1189,13 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index c18f6f6..6648506 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -1171,7 +1171,13 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index a3b0f35..45ef600 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -2111,7 +2111,13 @@ sound {
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 7ce61ed..4b4f49a 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -619,8 +619,14 @@ sound {
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 1f9198b..adba554 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -1030,8 +1030,14 @@ sound {
 		nvidia,audio-codec = <&sgtl5000>;
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 55ae050..d2d05f1 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra30-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra30";
@@ -714,11 +715,12 @@ kbc@7000e200 {
 		status = "disabled";
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra30-pmc";
 		reg = <0x7000e400 0x400>;
 		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	mc: memory-controller@7000f000 {
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 64ec46c..06e7400 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -51,7 +51,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
@@ -245,7 +245,7 @@ dmac: dma-controller@5a000000 {
 			#dma-cells = <1>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
@@ -265,7 +265,7 @@ sd: sdhc@5a400000 {
 			sd-uhs-sdr50;
 		};
 
-		emmc: sdhc@5a500000 {
+		emmc: mmc@5a500000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
@@ -375,7 +375,7 @@ intc: interrupt-controller@60001000 {
 			interrupt-controller;
 		};
 
-		aidet: aidet@61830000 {
+		aidet: interrupt-controller@61830000 {
 			compatible = "socionext,uniphier-ld4-aidet";
 			reg = <0x61830000 0x200>;
 			interrupt-controller;
@@ -398,7 +398,7 @@ sys_rst: reset {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 2ec04d7..1c866f0 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -59,7 +59,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
@@ -279,7 +279,7 @@ dmac: dma-controller@5a000000 {
 			#dma-cells = <1>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
@@ -299,7 +299,7 @@ sd: sdhc@5a400000 {
 			sd-uhs-sdr50;
 		};
 
-		emmc: sdhc@5a500000 {
+		emmc: mmc@5a500000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
@@ -317,7 +317,7 @@ emmc: sdhc@5a500000 {
 			non-removable;
 		};
 
-		sd1: sdhc@5a600000 {
+		sd1: mmc@5a600000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a600000 0x200>;
@@ -426,7 +426,7 @@ efuse@200 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pro4-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -588,7 +588,7 @@ usb1_rst: reset@40 {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index ea3961f..8f1ae09 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -131,7 +131,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
@@ -144,7 +144,7 @@ l2: l2-cache@500c0000 {
 			next-level-cache = <&l3>;
 		};
 
-		l3: l3-cache@500c8000 {
+		l3: cache-controller@500c8000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
 			      <0x506c8000 0x400>;
@@ -174,8 +174,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 11>;	/* common with spi0 */
+			resets = <&peri_rst 12>;
 		};
 
 		serial0: serial@54006800 {
@@ -408,7 +408,7 @@ efuse@400 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pro5-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -453,7 +453,155 @@ sys_rst: reset {
 			};
 		};
 
-		nand: nand@68000000 {
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 134 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pro5-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pro5-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: hs-phy@280 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x280 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy0: ss-phy@380 {
+				compatible = "socionext,uniphier-pro5-usb3-ssphy";
+				reg = <0x380 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 137 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pro5-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pro5-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: hs-phy@280 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x280 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: hs-phy@290 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x290 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: ss-phy@380 {
+				compatible = "socionext,uniphier-pro5-usb3-ssphy";
+				reg = <0x380 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
@@ -469,7 +617,7 @@ nand: nand@68000000 {
 			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 
-		emmc: sdhc@68400000 {
+		emmc: mmc@68400000 {
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68400000 0x800>;
@@ -485,7 +633,7 @@ emmc: sdhc@68400000 {
 			non-removable;
 		};
 
-		sd: sdhc@68800000 {
+		sd: mmc@68800000 {
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68800000 0x800>;
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 13b0d4a7..2f2a249 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -157,7 +157,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
@@ -187,8 +187,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
 		};
 
 		serial0: serial@54006800 {
@@ -446,7 +446,7 @@ peri_rst: reset {
 			};
 		};
 
-		emmc: sdhc@5a000000 {
+		emmc: mmc@5a000000 {
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a000000 0x800>;
@@ -462,7 +462,7 @@ emmc: sdhc@5a000000 {
 			non-removable;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
@@ -508,7 +508,7 @@ efuse@200 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pxs2-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -761,7 +761,7 @@ usb1_ssphy0: ss-phy@300 {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
index 04e60c29..a118976 100644
--- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
+++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
@@ -7,7 +7,7 @@
 
 &i2c0 {
 	eeprom@50 {
-		compatible = "microchip,24lc128";
+		compatible = "microchip,24lc128", "atmel,24c128";
 		reg = <0x50>;
 		pagesize = <64>;
 	};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 4fc6676..0999216 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -51,7 +51,7 @@ soc {
 		ranges;
 		interrupt-parent = <&intc>;
 
-		l2: l2-cache@500c0000 {
+		l2: cache-controller@500c0000 {
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
@@ -249,7 +249,7 @@ dmac: dma-controller@5a000000 {
 			#dma-cells = <1>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
@@ -269,7 +269,7 @@ sd: sdhc@5a400000 {
 			sd-uhs-sdr50;
 		};
 
-		emmc: sdhc@5a500000 {
+		emmc: mmc@5a500000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
@@ -379,7 +379,7 @@ intc: interrupt-controller@60001000 {
 			interrupt-controller;
 		};
 
-		aidet: aidet@61830000 {
+		aidet: interrupt-controller@61830000 {
 			compatible = "socionext,uniphier-sld8-aidet";
 			reg = <0x61830000 0x200>;
 			interrupt-controller;
@@ -402,7 +402,7 @@ sys_rst: reset {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts
index 5890cb9..c577ff4 100644
--- a/arch/arm/boot/dts/versatile-ab-ib2.dts
+++ b/arch/arm/boot/dts/versatile-ab-ib2.dts
@@ -10,7 +10,7 @@ / {
 	model = "ARM Versatile AB + IB2 board";
 
 	/* Special IB2 control register */
-	ib2_syscon@27000000 {
+	syscon@27000000 {
 		compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
 		reg = <0x27000000 0x4>;
 
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index dfae90a..5c18348 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -19,7 +19,7 @@
  */
 
 / {
-	smb@8000000 {
+	bus@8000000 {
 		motherboard {
 			model = "V2M-P1";
 			arm,hbi = <0x190>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index 2e29d77..5e48b64 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -19,7 +19,7 @@
  */
 
 / {
-	smb@4000000 {
+	bus@4000000 {
 		motherboard {
 			model = "V2M-P1";
 			arm,hbi = <0x190>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 0dc4277..f82fa34 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -236,7 +236,7 @@ energy {
 		};
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 1de0a65..3ac95a1 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -608,7 +608,7 @@ etm2_out_port: endpoint {
 		};
 	};
 
-	smb: smb@8000000 {
+	smb: bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index d5b47d5..7aa64ae 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -206,7 +206,7 @@ temp-dcc {
 		};
 	};
 
-	smb: smb@8000000 {
+	smb: bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index d796efa..623246f 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -295,7 +295,7 @@ power-vd10-s3 {
 		};
 	};
 
-	smb: smb@4000000 {
+	smb: bus@4000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index e2da122..c12a1b8 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 / {
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index fba37b8..cc1e069 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -1,42 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
+ * Copyright 2014-2020 Toradex
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
index 0769989..088964f 100644
--- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
index 92255f8..8af7ed5 100644
--- a/arch/arm/boot/dts/vf500-colibri.dtsi
+++ b/arch/arm/boot/dts/vf500-colibri.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 #include "vf500.dtsi"
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index b0ec475..0c0dd44 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -23,7 +23,7 @@ a5_cpu: cpu@0 {
 	};
 
 	soc {
-		aips-bus@40000000 {
+		bus@40000000 {
 
 			intc: interrupt-controller@40003000 {
 				compatible = "arm,cortex-a9-gic";
@@ -43,7 +43,7 @@ global_timer: timer@40002200 {
 			};
 		};
 
-		aips-bus@40080000 {
+		bus@40080000 {
 			pmu@40089000 {
 				compatible = "arm,cortex-a5-pmu";
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
index ef9b4d6..fb661e8 100644
--- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index 05c9a39..607cec2 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright 2014-2020 Toradex
  */
 
 #include "vf610.dtsi"
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index 2873224..ce1920c 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -71,6 +71,14 @@ sff: sfp {
 		los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
 		tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 28VDC_IN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index a1b4ccee..95d0060 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -84,6 +84,14 @@ usb0_vbus: regulator-usb0-vbus {
 		regulator-boot-on;
 		gpio = <&gpio0 6 0>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* VCC_1V5 */
+			      <&adc0 9>, /* VCC_1V8 */
+			      <&adc1 8>, /* VCC_1V0 */
+			      <&adc1 9>; /* VCC_1V2 */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
index 77e1484..55b4201 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -42,6 +42,14 @@ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 28V_SW   */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index 847c585..a6c22a7 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -46,6 +46,14 @@ reg_vcc_3v3_mcu: regulator {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 12V_MAIN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index 453fce8..3d05c89 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -46,6 +46,14 @@ reg_vcc_3v3_mcu: regulator {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 12V_MAIN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
 };
 
 &adc0 {
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
index d4bc0e3..2c2db47 100644
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device tree for Colibri VF61 Cortex-M4 support
  *
  * Copyright (C) 2015 Stefan Agner
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 028e0ec..2d547e7 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -59,7 +59,7 @@ soc {
 		interrupt-parent = <&mscm_ir>;
 		ranges;
 
-		aips0: aips-bus@40000000 {
+		aips0: bus@40000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -471,7 +471,7 @@ src: src@4006e000 {
 			};
 		};
 
-		aips1: aips-bus@40080000 {
+		aips1: bus@40080000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index cf4f786..e4d3cd0 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -9,6 +9,9 @@
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 6dfafa1..5fa9ca0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -158,6 +158,17 @@ &r_pio {
 	 */
 };
 
+&pio {
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -170,6 +181,12 @@ axp803: pmic@3a3 {
 	};
 };
 
+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
+/* interface used to talk to the PMIC in on the PL pins */
+/* &r_pio { */
+/*	vcc-pl-supply = <&reg_aldo2>; */
+/* }; */
+
 #include "axp803.dtsi"
 
 &ac_power_supply {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 3d894b2..64b1c54 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -21,32 +21,17 @@ aliases {
 		ethernet0 = &rtl8723cs;
 	};
 
-	vdd_bl: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "bl-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-		enable-active-high;
-	};
-
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 50000 0>;
 		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
 		default-brightness-level = <2>;
 		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
-		power-supply = <&vdd_bl>;
+		power-supply = <&reg_vbklt>;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-
-		framebuffer-lcd {
-			panel-supply = <&reg_dc1sw>;
-			dvdd25-supply = <&reg_dldo2>;
-			dvdd12-supply = <&reg_fldo1>;
-		};
 	};
 
 	gpio_keys {
@@ -63,11 +48,34 @@ lid_switch {
 		};
 	};
 
-	reg_vcc3v3: vcc3v3 {
+	panel_edp: panel-edp {
+		compatible = "neweast,wjfh116008a";
+		backlight = <&backlight>;
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_edp_in: endpoint {
+				remote-endpoint = <&anx6345_out_edp>;
+			};
+		};
+	};
+
+	reg_vbklt: vbklt {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+		regulator-name = "vbklt";
+		regulator-min-microvolt = <18000000>;
+		regulator-max-microvolt = <18000000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	wifi_pwrseq: wifi_pwrseq {
@@ -77,12 +85,7 @@ wifi_pwrseq: wifi_pwrseq {
 
 	speaker_amp: audio-amplifier {
 		compatible = "simple-audio-amplifier";
-		/*
-		 * TODO This is actually a fixed regulator controlled by
-		 * the GPIO line on the PMIC. This should be corrected
-		 * once GPIO support is added for this PMIC.
-		 */
-		VCC-supply = <&reg_ldo_io0>;
+		VCC-supply = <&reg_vcc5v0>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
 		sound-name-prefix = "Speaker Amp";
 	};
@@ -118,6 +121,10 @@ &dai {
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	phys = <&usbphy 0>;
 	phy-names = "usb";
@@ -128,11 +135,15 @@ &ehci1 {
 	status = "okay";
 };
 
+&mixer0 {
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	disable-wp;
 	bus-width = <4>;
 	status = "okay";
@@ -175,10 +186,61 @@ &ohci1 {
 	status = "okay";
 };
 
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_eldo1>;
+};
+
 &pwm {
 	status = "okay";
 };
 
+&r_i2c {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_i2c_pl89_pins>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_fldo1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			anx6345_in: port@0 {
+				reg = <0>;
+				anx6345_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+
+			anx6345_out: port@1 {
+				reg = <1>;
+				anx6345_out_edp: endpoint {
+					remote-endpoint = <&panel_edp_in>;
+				};
+			};
+		};
+	};
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -190,14 +252,6 @@ axp803: pmic@3a3 {
 	};
 };
 
-/* The ANX6345 eDP-bridge is on r_i2c */
-&r_i2c {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_i2c_pl89_pins>;
-	status = "okay";
-};
-
 #include "axp803.dtsi"
 
 &ac_power_supply {
@@ -209,9 +263,7 @@ &battery_power_supply {
 };
 
 &reg_aldo1 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-name = "vcc-csi";
+	regulator-name = "vcc-pe";
 };
 
 &reg_aldo2 {
@@ -274,12 +326,6 @@ &reg_dldo2 {
 	regulator-name = "vcc-edp";
 };
 
-&reg_dldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "avdd-csi";
-};
-
 &reg_dldo4 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -293,12 +339,6 @@ &reg_eldo1 {
 	regulator-name = "cpvdd";
 };
 
-&reg_eldo3 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-name = "vdd-1v8-csi";
-};
-
 &reg_fldo1 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
@@ -312,17 +352,16 @@ &reg_fldo2 {
 	regulator-name = "vdd-cpus";
 };
 
-&reg_ldo_io0 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-usb";
-	status = "okay";
-};
-
 &reg_rtc_ldo {
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_lcd {
+	panel-supply = <&reg_dc1sw>;
+	dvdd25-supply = <&reg_dldo2>;
+	dvdd12-supply = <&reg_fldo1>;
+};
+
 &simplefb_hdmi {
 	vcc-hdmi-supply = <&reg_dldo1>;
 };
@@ -350,6 +389,19 @@ &sound {
 			"MIC2", "Internal Microphone Right";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint {
+		remote-endpoint = <&anx6345_in_tcon0>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;
@@ -361,7 +413,7 @@ &usb_otg {
 };
 
 &usbphy {
-	usb0_vbus-supply = <&reg_ldo_io0>;
-	usb1_vbus-supply = <&reg_ldo_io0>;
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
new file mode 100644
index 0000000..0c42272
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Developer Batch (1.0)";
+	compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
new file mode 100644
index 0000000..06a775c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Braveheart (1.1)";
+	compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
new file mode 100644
index 0000000..cefda14
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+
+		green {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+		};
+
+		red {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		vcc-supply = <&reg_dcdc1>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* Magnetometer */
+	lis3mdl@1e {
+		compatible = "st,lis3mdl-magn";
+		reg = <0x1e>;
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+
+	/* Accelerometer/gyroscope */
+	mpu6050@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+};
+
+/* Connected to pogo pins (external spring based pinheader for user addons) */
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-mipi-io";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-lpddr";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd-ctp-stk";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8-typec";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Earpiece",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Headphone Jack", "HP",
+			"Internal Earpiece", "EARPIECE",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right",
+			"AIF1 Slot 0 Left ADC", "Left ADC",
+			"AIF1 Slot 0 Right ADC", "Right ADC",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Connected to the modem (hardware flow control can't be used) */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
new file mode 100644
index 0000000..316e8a4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PineTab";
+	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
+		default-brightness-level = <15>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+		power-supply = <&vdd_bl>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c-csi {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Rear camera */
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_dldo3>;
+			DOVDD-supply = <&reg_aldo1>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vdd_bl: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	hpvcc-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "feixin,k101-im2ba02";
+		reg = <0>;
+		avdd-supply = <&reg_dc1sw>;
+		dvdd-supply = <&reg_dc1sw>;
+		cvdd-supply = <&reg_ldo_io1>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		AVDD28-supply = <&reg_ldo_io1>;
+	};
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* TODO: add Bochs BMA223 accelerometer here */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mixer1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcca-1v8";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-enable-ramp-delay = <3500000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+				    "Microphone", "Internal Microphone Right",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Headphone Jack", "HP",
+			"AIF1 Slot 0 Left ADC", "Left ADC",
+			"AIF1 Slot 0 Right ADC", "Right ADC",
+			"Internal Microphone Left", "MBIAS",
+			"MIC1", "Internal Microphone Left",
+			"Internal Microphone Right", "HBIAS",
+			"MIC2", "Internal Microphone Right";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_ldo_io0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 862b47d..31143fe 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -264,7 +264,7 @@ bus@1000000 {
 
 			display_clocks: clock@0 {
 				compatible = "allwinner,sun50i-a64-de2-clk";
-				reg = <0x0 0x100000>;
+				reg = <0x0 0x10000>;
 				clocks = <&ccu CLK_BUS_DE>,
 					 <&ccu CLK_DE>;
 				clock-names = "bus",
@@ -274,6 +274,18 @@ display_clocks: clock@0 {
 				#reset-cells = <1>;
 			};
 
+			rotate: rotate@20000 {
+				compatible = "allwinner,sun50i-a64-de2-rotate",
+					     "allwinner,sun8i-a83t-de2-rotate";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&display_clocks CLK_BUS_ROT>,
+					 <&display_clocks CLK_ROT>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_ROT>;
+			};
+
 			mixer0: mixer@100000 {
 				compatible = "allwinner,sun50i-a64-de2-mixer-0";
 				reg = <0x100000 0x100000>;
@@ -671,6 +683,11 @@ i2c1_pins: i2c1-pins {
 				function = "i2c1";
 			};
 
+			i2c2_pins: i2c2-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
 			/omit-if-no-ref/
 			lcd_rgb666_pins: lcd-rgb666-pins {
 				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
@@ -958,12 +975,13 @@ i2c2: i2c@1c2b400 {
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-
 		spi0: spi@1c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;
@@ -1061,6 +1079,14 @@ pwm: pwm@1c21400 {
 			status = "disabled";
 		};
 
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun50i-a64-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 112>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
 		csi: csi@1cb0000 {
 			compatible = "allwinner,sun50i-a64-csi";
 			reg = <0x01cb0000 0x1000>;
@@ -1106,6 +1132,20 @@ dphy: d-phy@1ca1000 {
 			#phy-cells = <0>;
 		};
 
+		deinterlace: deinterlace@1e00000 {
+			compatible = "allwinner,sun50i-a64-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01e00000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 70b5f099..7d7aad1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -61,6 +61,7 @@ sw4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -93,6 +94,10 @@ &codec {
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &de {
 	status = "okay";
 };
@@ -168,6 +173,22 @@ &ohci3 {
 	status = "okay";
 };
 
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1100000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
 &spi0  {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 9893aa6..4462a68 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -38,8 +38,7 @@ cpu3: cpu@3 {
 	};
 
 	pmu {
-		compatible = "arm,cortex-a53-pmu",
-			     "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index df6d872..8f09d20 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -32,6 +32,13 @@ hdmi_con_in: endpoint {
 		};
 	};
 
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -275,6 +282,10 @@ &r_pio {
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
 &spdif {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index c311eee..47f5796 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -32,6 +32,13 @@ hdmi_con_in: endpoint {
 		};
 	};
 
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -144,6 +151,15 @@ brcm: sdio-wifi@1 {
 	};
 };
 
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -276,6 +292,10 @@ &r_ir {
 	status = "okay";
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
index 83aab73..fceb298 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -7,4 +7,37 @@
 / {
 	model = "OrangePi One Plus";
 	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+		vin-supply = <&reg_aldo2>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <200>;
+	allwinner,tx-delay-ps = <200>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 37f4c57..9287976 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -20,6 +20,25 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -45,6 +64,10 @@ reg_vcc5v: vcc5v {
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -58,6 +81,16 @@ &gpu {
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -197,6 +230,10 @@ &r_ir {
 	status = "okay";
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index d1c2aa5..b0642d8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -14,12 +14,20 @@ / {
 	aliases {
 		ethernet0 = &emac;
 		serial0 = &uart0;
+		spi0 = &spi0;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
 	hdmi_connector: connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -278,6 +286,28 @@ &r_pio {
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+/*
+ * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
+ * flash and eMMC at the same time, as one of them would fail probing.
+ * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
+ * fix this up in no eMMC is connected.
+ */
+&spi0 {
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+
+	flash@0 {
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 3329283..b9ab7d8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -62,16 +62,8 @@ osc24M: osc24M_clk {
 		clock-output-names = "osc24M";
 	};
 
-	ext_osc32k: ext_osc32k_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "ext_osc32k";
-	};
-
 	pmu {
-		compatible = "arm,cortex-a53-pmu",
-			     "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -338,6 +330,31 @@ mmc2_pins: mmc2-pins {
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			/* pin shared with MMC2-CMD (eMMC) */
+			/omit-if-no-ref/
+			spi0_cs_pin: spi0-cs-pin {
+				pins = "PC5";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PH4", "PH5", "PH6";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs_pin: spi1-cs-pin {
+				pins = "PH3";
+				function = "spi1";
+			};
+
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -504,6 +521,36 @@ i2c2: i2c@5002800 {
 			#size-cells = <0>;
 		};
 
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		emac: ethernet@5020000 {
 			compatible = "allwinner,sun50i-h6-emac",
 				     "allwinner,sun50i-a64-emac";
@@ -800,7 +847,6 @@ rtc: rtc@7000000 {
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-output-names = "osc32k", "osc32k-out", "iosc";
-			clocks = <&ext_osc32k>;
 			#clock-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index fb11ef0..f6c4a15 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -178,12 +178,12 @@ partitions {
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x034B0000>;
+				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@4000000 {
+			qspi_rootfs: partition@3FE0000 {
 				label = "Root Filesystem - JFFS2";
-				reg = <0x034B0000 0x0EB50000>;
+				reg = <0x03FE0000 0x0C020000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 4dec518..755b4ad 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -60,6 +60,12 @@ linux,cma {
 
 	sm: secure-monitor {
 		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,meson-a1-pwrc";
+			#power-domain-cells = <1>;
+			status = "okay";
+		};
 	};
 
 	soc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 4cd2d59..cb1360a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -313,15 +313,15 @@ dai-link-6 {
 			dai-tdm-slot-rx-mask-1 = <1 1>;
 			mclk-fs = <256>;
 
-			codec@0 {
+			codec-0 {
 				sound-dai = <&lineout>;
 			};
 
-			codec@1 {
+			codec-1 {
 				sound-dai = <&speaker_amp1>;
 			};
 
-			codec@2 {
+			codec-2 {
 				sound-dai = <&linein>;
 			};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index abe04f4..0882ea2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -295,17 +295,9 @@ mux {
 						};
 					};
 
-					emmc_pins: emmc {
+					emmc_ctrl_pins: emmc-ctrl {
 						mux-0 {
-							groups = "emmc_nand_d0",
-								 "emmc_nand_d1",
-								 "emmc_nand_d2",
-								 "emmc_nand_d3",
-								 "emmc_nand_d4",
-								 "emmc_nand_d5",
-								 "emmc_nand_d6",
-								 "emmc_nand_d7",
-								 "emmc_cmd";
+							groups = "emmc_cmd";
 							function = "emmc";
 							bias-pull-up;
 							drive-strength-microamp = <4000>;
@@ -319,6 +311,34 @@ mux-1 {
 						};
 					};
 
+					emmc_data_4b_pins: emmc-data-4b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_data_8b_pins: emmc-data-8b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3",
+								 "emmc_nand_d4",
+								 "emmc_nand_d5",
+								 "emmc_nand_d6",
+								 "emmc_nand_d7";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
 					emmc_ds_pins: emmc-ds {
 						mux {
 							groups = "emmc_nand_ds";
@@ -573,6 +593,17 @@ mux {
 						};
 					};
 
+					nor_pins: nor {
+						mux {
+							groups = "nor_d",
+							       "nor_q",
+							       "nor_c",
+							       "nor_cs";
+							function = "nor";
+							bias-disable;
+						};
+					};
+
 					pdm_din0_a_pins: pdm-din0-a {
 						mux {
 							groups = "pdm_din0_a";
@@ -957,6 +988,57 @@ mux {
 						};
 					};
 
+					spicc0_x_pins: spicc0-x {
+						mux {
+							groups = "spi0_mosi_x",
+							       "spi0_miso_x",
+							       "spi0_clk_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_ss0_x_pins: spicc0-ss0-x {
+						mux {
+							groups = "spi0_ss0_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_c_pins: spicc0-c {
+						mux {
+							groups = "spi0_mosi_c",
+							       "spi0_miso_c",
+							       "spi0_ss0_c",
+							       "spi0_clk_c";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc1_pins: spicc1 {
+						mux {
+							groups = "spi1_mosi",
+							       "spi1_miso",
+							       "spi1_clk";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					spicc1_ss0_pins: spicc1-ss0 {
+						mux {
+							groups = "spi1_ss0";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
 					tdm_a_din0_pins: tdm-a-din0 {
 						mux {
 							groups = "tdm_a_din0";
@@ -2051,6 +2133,39 @@ gpio_intc: interrupt-controller@f080 {
 				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 			};
 
+			spicc0: spi@13000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x13000 0x0 0x44>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC0>,
+					 <&clkc CLKID_SPICC0_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@15000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x15000 0x0 0x44>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC1>,
+					 <&clkc CLKID_SPICC1_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@14000 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				status = "disabled";
+				reg = <0x0 0x14000 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_CLK81>;
+			};
+
 			pwm_ef: pwm@19000 {
 				compatible = "amlogic,meson-g12a-ee-pwm";
 				reg = <0x0 0x19000 0x0 0x20>;
@@ -2220,6 +2335,7 @@ dwc3: usb@ff500000 {
 				dr_mode = "host";
 				snps,dis_u2_susphy_quirk;
 				snps,quirk-frame-length-adjustment;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 03054c4..783e5a3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -1,3 +1,4 @@
+
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2019 BayLibre, SAS
@@ -56,6 +57,7 @@ pdm: audio-controller@40000 {
 			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
 			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
 		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 2ac9e3a..b00d046 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -269,7 +269,7 @@ dai-link-7 {
 			dai-tdm-slot-tx-mask-3 = <1 1>;
 			mclk-fs = <256>;
 
-			codec@0 {
+			codec {
 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
 			};
 		};
@@ -472,7 +472,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 2a324f0..a26bfe7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -271,7 +271,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 4f2596d..1b07c8c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -443,7 +443,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 5548634..c33e85f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -8,6 +8,8 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
+	model = "Khadas VIM3";
+
 	vddcpu_a: regulator-vddcpu-a {
 		/*
 		 * MP8756GD Regulator.
@@ -48,7 +50,7 @@ vddcpu_b: regulator-vddcpu-b {
 
 	sound {
 		compatible = "amlogic,axg-sound-card";
-		model = "G12A-KHADAS-VIM3";
+		model = "G12B-KHADAS-VIM3";
 		audio-aux-devs = <&tdmout_b>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 0e54c1d..169ea28 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -208,7 +208,7 @@ hdmi_connector_in: endpoint {
 
 	sound {
 		compatible = "amlogic,axg-sound-card";
-		model = "G12A-ODROIDN2";
+		model = "G12B-ODROID-N2";
 		audio-aux-devs = <&tdmout_b>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
@@ -435,7 +435,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
@@ -451,6 +451,27 @@ &sd_emmc_c {
 	vqmmc-supply = <&flash_1v8>;
 };
 
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	mx25u64: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
 &tdmif_b {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index ccd0bced..325e448 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -485,7 +485,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 40db06e..03f79fe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -83,6 +84,7 @@ cpu0: cpu@0 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -92,6 +94,7 @@ cpu1: cpu@1 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -101,6 +104,7 @@ cpu2: cpu@2 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -110,6 +114,7 @@ cpu3: cpu@3 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
@@ -117,6 +122,53 @@ l2: l2-cache0 {
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&scpi_sensors 0>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 2f1f829..6c9cc45 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -76,3 +76,7 @@ eth_phy0: ethernet-phy@0 {
 		};
 	};
 };
+
+&ir {
+	linux,rc-map-name = "rc-videostrong-kii-pro";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 6ded279..b46ef98 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -248,6 +248,7 @@ &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
 };
 
 &gpio_ao {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 5eab3df..45cb836 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -245,6 +245,9 @@ &uart_A {
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index 43eb7d1..6ac678f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -15,7 +15,6 @@
 / {
 	aliases {
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		ethernet0 = &ethmac;
 	};
 
@@ -180,6 +179,14 @@ &uart_A {
 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
 };
 
 &uart_AO {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index f82f25c..27eeab7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -8,7 +8,6 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
 
 #include "meson-gxm.dtsi"
 
@@ -100,49 +99,6 @@ sdio_pwrseq: sdio-pwrseq {
 		clock-names = "ext_clock";
 	};
 
-	thermal-zones {
-		cpu-thermal {
-			polling-delay-passive = <250>; /* milliseconds */
-			polling-delay = <1000>; /* milliseconds */
-
-			thermal-sensors = <&scpi_sensors 0>;
-
-			trips {
-				cpu_alert0: cpu-alert0 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "active";
-				};
-
-				cpu_alert1: cpu-alert1 {
-					temperature = <80000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert0>;
-					cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
-				};
-
-				map1 {
-					trip = <&cpu_alert1>;
-					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
-							 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
 	hdmi_5v: regulator-hdmi-5v {
 		compatible = "regulator-fixed";
 
@@ -198,36 +154,23 @@ &cec_AO {
 	hdmi-phandle = <&hdmi_tx>;
 };
 
-&cpu0 {
-	#cooling-cells = <2>;
-};
 
-&cpu1 {
-	#cooling-cells = <2>;
-};
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
+	};
 
-&cpu2 {
-	#cooling-cells = <2>;
-};
-
-&cpu3 {
-	#cooling-cells = <2>;
-};
-
-&cpu4 {
-	#cooling-cells = <2>;
-};
-
-&cpu5 {
-	#cooling-cells = <2>;
-};
-
-&cpu6 {
-	#cooling-cells = <2>;
-};
-
-&cpu7 {
-	#cooling-cells = <2>;
+	map1 {
+		cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+				 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
 };
 
 &ethmac {
@@ -327,7 +270,7 @@ &sd_emmc_a {
 	#size-cells = <0>;
 
 	bus-width = <4>;
-	max-frequency = <50000000>;
+	max-frequency = <60000000>;
 
 	non-removable;
 	disable-wp;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 5ff64a0..b6f89f1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -49,6 +49,7 @@ cpu4: cpu@100 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@101 {
@@ -58,6 +59,7 @@ cpu5: cpu@101 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@102 {
@@ -67,6 +69,7 @@ cpu6: cpu@102 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@103 {
@@ -76,6 +79,7 @@ cpu7: cpu@103 {
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 	};
 };
@@ -124,6 +128,30 @@ &clkc_AO {
 	compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
 };
 
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+
+	map1 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
 &saradc {
 	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 90815fa..094ecf2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -9,8 +9,6 @@
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 
 / {
-	model = "Khadas VIM3";
-
 	aliases {
 		serial0 = &uart_AO;
 		ethernet0 = &ethmac;
@@ -312,7 +310,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
@@ -328,6 +326,26 @@ &sd_emmc_c {
 	vqmmc-supply = <&emmc_1v8>;
 };
 
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q32: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128fw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
 &uart_A {
 	status = "okay";
 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index a8bb3fa..71cc730 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -518,7 +518,7 @@ &sd_emmc_b {
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index d847a3f..d4ec735 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -448,6 +448,7 @@ pdm: audio-controller@61000 {
 			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
 			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
 		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 3f78373..12f039fa 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -92,7 +92,7 @@ watchdog@2a440000 {
 		timeout-sec = <30>;
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "arm,vexpress,v2m-p1", "simple-bus";
 		arm,v2m-memory-map = "rs1";
 		#address-cells = <2>; /* SMB chipselect number and offset */
diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index 335fff7..66381d8 100644
--- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -206,7 +206,7 @@ panel-timing {
 	       };
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 1f3c80a..f588928 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -800,7 +800,7 @@ memory@80000000 {
 		      <0x00000008 0x80000000 0x1 0x80000000>;
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 9f60dac..e3983de 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -8,7 +8,7 @@
  */
 
 / {
-	smb@8000000 {
+	bus@8000000 {
 		mb_clk24mhz: clk24mhz {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 6e685d8..c5d15cb 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -132,7 +132,7 @@ panel_in: endpoint {
 		};
 	};
 
-	smb@8000000 {
+	bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
index 57b0b9d..60703b5 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
@@ -5,7 +5,7 @@
  * "rs2" extension for the v2m motherboard
  */
 / {
-	smb@8000000 {
+	bus@8000000 {
 		motherboard {
 			arm,v2m-memory-map = "rs2";
 
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 03a7bf0..e333c8d 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -8,7 +8,7 @@
  * VEMotherBoard.lisa
  */
 / {
-	smb@8000000 {
+	bus@8000000 {
 		motherboard {
 			arm,v2m-memory-map = "rs1";
 			compatible = "arm,vexpress,v2m-p1", "simple-bus";
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 22383c2..d859914 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -144,7 +144,7 @@ temp-fpga {
 		};
 	};
 
-	smb: smb@8000000 {
+	smb: bus@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index bac293e..a39f0a1 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -4,6 +4,11 @@
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
@@ -26,6 +31,7 @@
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
new file mode 100644
index 0000000..4b4cc6a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree File for the Kontron KBox A-230-LS.
+ *
+ * This consists of a Kontron SMARC-sAL28 (Dual PHY) and a special
+ * carrier (s1914).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28-var4.dts"
+
+/ {
+	model = "Kontron KBox A-230-LS";
+	compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
+		     "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	/* BCM54140 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@7 {
+		reg = <7>;
+	};
+
+	qsgmii_phy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+
+	qsgmii_phy2: ethernet-phy@9 {
+		reg = <9>;
+	};
+
+	qsgmii_phy3: ethernet-phy@10 {
+		reg = <10>;
+	};
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
new file mode 100644
index 0000000..901b5b1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 2 which has two ethernet ports. These
+ * ports are connected to the internal switch.
+ *
+ * Copyright (C) 2020 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (TSN-on-module)";
+	compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	phy0: ethernet-phy@5 {
+		reg = <0x5>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+
+	phy1: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&enetc_port0 {
+	status = "disabled";
+	/*
+	 * In the base device tree the PHY was registered in the mdio
+	 * subnode as it is PHY for this port. On this module this PHY
+	 * is connected to a switch port instead and registered above.
+	 * Therefore, delete the mdio subnode as well as the phy-handle
+	 * property here.
+	 */
+	/delete-property/ phy-handle;
+	/delete-node/ mdio;
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "gbe0";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "gbe1";
+	phy-handle = <&phy1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
new file mode 100644
index 0000000..0973a6a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0
+ * carrier (ADS2).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
+	compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
+		     "kontron,sl28", "fsl,ls1028a";
+
+	sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out Jack",
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "LINEOUTR",
+			"Line Out Jack", "LINEOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN2L", "Microphone Jack",
+			"IN2R", "Microphone Jack";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			bitclock-master = <&dailink0_master>;
+			frame-master = <&dailink0_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai6>;
+			};
+
+			dailink0_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			bitclock-master = <&dailink1_master>;
+			frame-master = <&dailink1_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai5>;
+			};
+
+			dailink1_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+	};
+};
+
+&dspi2 {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&mclk>;
+		clock-names = "mclk";
+		assigned-clocks = <&mclk>;
+		assigned-clock-rates = <1250000>;
+	};
+};
+
+&sai5 {
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&soc {
+	mclk: clock-mclk@f130080 {
+		compatible = "fsl,vf610-sai-clock";
+		reg = <0x0 0xf130080 0x0 0x80>;
+		clocks = <&clockgen 4 1>;
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
new file mode 100644
index 0000000..df212ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 4 which has two ethernet ports. It
+ * extends the base and provides one more port connected via RGMII.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+	model = "Kontron SMARC-sAL28 (Dual PHY)";
+	compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_port1 {
+	phy-handle = <&phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@4 {
+			reg = <0x4>;
+			eee-broken-1000t;
+			eee-broken-100tx;
+
+			qca,clk-out-frequency = <125000000>;
+			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+
+			vddio-supply = <&vddh>;
+
+			vddio: vddio-regulator {
+				regulator-name = "VDDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh: vddh-regulator {
+				regulator-name = "VDDH";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
new file mode 100644
index 0000000..1648a04
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAL28";
+	compatible = "kontron,sl28", "fsl,ls1028a";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		spi0 = &fspi;
+		spi1 = &dspi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dspi2 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_port0 {
+	phy-handle = <&phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@5 {
+			reg = <0x5>;
+			eee-broken-1000t;
+			eee-broken-100tx;
+		};
+	};
+};
+
+&esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <133000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+
+		partition@0 {
+			reg = <0x000000 0x010000>;
+			label = "rcw";
+			read-only;
+		};
+
+		partition@10000 {
+			reg = <0x010000 0x0f0000>;
+			label = "failsafe bootloader";
+			read-only;
+		};
+
+		partition@100000 {
+			reg = <0x100000 0x040000>;
+			label = "failsafe DP firmware";
+			read-only;
+		};
+
+		partition@140000 {
+			reg = <0x140000 0x0a0000>;
+			label = "failsafe trusted firmware";
+			read-only;
+		};
+
+		partition@1e0000 {
+			reg = <0x1e0000 0x020000>;
+			label = "reserved";
+			read-only;
+		};
+
+		partition@200000 {
+			reg = <0x200000 0x010000>;
+			label = "configuration store";
+		};
+
+		partition@210000 {
+			reg = <0x210000 0x0f0000>;
+			label = "bootloader";
+		};
+
+		partition@300000 {
+			reg = <0x300000 0x040000>;
+			label = "DP firmware";
+		};
+
+		partition@340000 {
+			reg = <0x340000 0x0a0000>;
+			label = "trusted firmware";
+		};
+
+		partition@3e0000 {
+			reg = <0x3e0000 0x020000>;
+			label = "bootloader environment";
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "TDO", "TCK",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "TMS", "TDI",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index ca409d9..dd69c5b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -225,6 +225,7 @@ mux: mux-controller {
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
+	status = "okay";
 };
 
 &sai1 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index afb5565..c2dc123 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -177,9 +177,29 @@ &duart1 {
 	status = "okay";
 };
 
+&enetc_mdio_pf3 {
+	/* VSC8514 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@10 {
+		reg = <0x10>;
+	};
+
+	qsgmii_phy1: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	qsgmii_phy2: ethernet-phy@12 {
+		reg = <0x12>;
+	};
+
+	qsgmii_phy3: ethernet-phy@13 {
+		reg = <0x13>;
+	};
+};
+
 &enetc_port0 {
 	phy-handle = <&sgmii_phy0>;
 	phy-connection-type = "sgmii";
+	status = "okay";
 
 	mdio {
 		#address-cells = <1>;
@@ -190,8 +210,49 @@ sgmii_phy0: ethernet-phy@2 {
 	};
 };
 
-&enetc_port1 {
-	status = "disabled";
+&enetc_port2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
 };
 
 &sai4 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 0bf375e..09f37ba 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -290,6 +290,45 @@ fspi: spi@20c0000 {
 			status = "disabled";
 		};
 
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <3>;
+			little-endian;
+			status = "disabled";
+		};
+
 		esdhc: mmc@2140000 {
 			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
@@ -411,6 +450,60 @@ sata: sata@3200000 {
 			status = "disabled";
 		};
 
+		pcie@3400000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
 		smmu: iommu@5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
@@ -683,7 +776,6 @@ pcie@1f0000000 { /* Integrated Endpoint Root Complex */
 			reg = <0x01 0xf0000000 0x0 0x100000>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 			msi-parent = <&its>;
 			device_type = "pci";
 			bus-range = <0x0 0x0>;
@@ -701,27 +793,115 @@ pcie@1f0000000 { /* Integrated Endpoint Root Complex */
 				  /* PF1: VF0-1 BAR0 - non-prefetchable memory */
 				  0x82000000 0x0 0x00000000  0x1 0xf8210000  0x0 0x020000
 				  /* PF1: VF0-1 BAR2 - prefetchable memory */
-				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000>;
+				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000
+				  /* BAR4 (PF5) - non-prefetchable memory */
+				  0x82000000 0x0 0x00000000  0x1 0xfc000000  0x0 0x400000>;
 
 			enetc_port0: ethernet@0,0 {
 				compatible = "fsl,enetc";
 				reg = <0x000000 0 0 0 0>;
+				status = "disabled";
 			};
+
 			enetc_port1: ethernet@0,1 {
 				compatible = "fsl,enetc";
 				reg = <0x000100 0 0 0 0>;
+				status = "disabled";
 			};
+
+			enetc_port2: ethernet@0,2 {
+				compatible = "fsl,enetc";
+				reg = <0x000200 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
 			enetc_mdio_pf3: mdio@0,3 {
 				compatible = "fsl,enetc-mdio";
 				reg = <0x000300 0 0 0 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 			ethernet@0,4 {
 				compatible = "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
 				clocks = <&clockgen 4 0>;
 				little-endian;
+				fsl,extts-fifo;
+			};
+
+			mscc_felix: ethernet-switch@0,5 {
+				reg = <0x000500 0 0 0 0>;
+				/* IEP INT_B */
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* External ports */
+					mscc_felix_port0: port@0 {
+						reg = <0>;
+						status = "disabled";
+					};
+
+					mscc_felix_port1: port@1 {
+						reg = <1>;
+						status = "disabled";
+					};
+
+					mscc_felix_port2: port@2 {
+						reg = <2>;
+						status = "disabled";
+					};
+
+					mscc_felix_port3: port@3 {
+						reg = <3>;
+						status = "disabled";
+					};
+
+					/* Internal ports */
+					mscc_felix_port4: port@4 {
+						reg = <4>;
+						phy-mode = "internal";
+						status = "disabled";
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
+					};
+
+					mscc_felix_port5: port@5 {
+						reg = <5>;
+						phy-mode = "internal";
+						status = "disabled";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+
+			enetc_port3: ethernet@0,6 {
+				compatible = "fsl,enetc";
+				reg = <0x000600 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 4d77b34..5633e59 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -83,6 +83,7 @@ &duart1 {
 };
 
 &esdhc {
+	mmc-hs200-1_8v;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 5945662..36a7995 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -393,6 +393,7 @@ esdhc: esdhc@2140000 {
 			reg = <0x0 0x2140000 0x0 0x10000>;
 			interrupts = <0 28 0x4>; /* Level high type */
 			clock-frequency = <0>;
+			clocks = <&clockgen 2 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			little-endian;
@@ -493,6 +494,7 @@ pcie@3400000 {
 					<0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -518,6 +520,7 @@ pcie@3500000 {
 					<0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -543,6 +546,7 @@ pcie@3600000 {
 					<0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f96d06d..3944ef1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -648,6 +648,7 @@ pcie1: pcie@3400000 {
 					<0000 0 0 2 &gic 0 0 0 110 4>,
 					<0000 0 0 3 &gic 0 0 0 111 4>,
 					<0000 0 0 4 &gic 0 0 0 112 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -669,6 +670,7 @@ pcie2: pcie@3500000 {
 					<0000 0 0 2 &gic 0 0 0 115 4>,
 					<0000 0 0 3 &gic 0 0 0 116 4>,
 					<0000 0 0 4 &gic 0 0 0 117 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -690,6 +692,7 @@ pcie3: pcie@3600000 {
 					<0000 0 0 2 &gic 0 0 0 120 4>,
 					<0000 0 0 3 &gic 0 0 0 121 4>,
 					<0000 0 0 4 &gic 0 0 0 122 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
@@ -711,6 +714,7 @@ pcie4: pcie@3700000 {
 					<0000 0 0 2 &gic 0 0 0 125 4>,
 					<0000 0 0 3 &gic 0 0 0 126 4>,
 					<0000 0 0 4 &gic 0 0 0 127 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index 071e216..d87d164 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -59,6 +59,32 @@ i2c-switch@77 {
 		#size-cells = <0>;
 		reg = <0x77>;
 
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c512";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,spd";
+				reg = <0x51>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,spd";
+				reg = <0x53>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+		};
+
 		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -73,6 +99,17 @@ fan-temperature-ctrlr@18 {
 			};
 		};
 
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			regulator@5c {
+				compatible = "lltc,ltc3882";
+				reg = <0x5c>;
+			};
+		};
+
 		i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 1a5acf6..3b88e1e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -43,6 +43,21 @@ &esdhc1 {
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 51615de..22d0308 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -84,7 +84,7 @@ &fspi {
 	mt35xu512aba0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,m25p80";
+		compatible = "jedec,spi-nor";
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		reg = <0>;
@@ -95,7 +95,7 @@ mt35xu512aba0: flash@0 {
 	mt35xu512aba1: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,m25p80";
+		compatible = "jedec,spi-nor";
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		reg = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e5ee559..ae1b113 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -834,6 +834,174 @@ sata3: sata@3230000 {
 			status = "disabled";
 		};
 
+		pcie@3400000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x88 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3600000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x90 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <256>;
+			ppio-wins = <24>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3700000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+			       0x98 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3800000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
+			       0xa0 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <256>;
+			ppio-wins = <24>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie@3900000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
+			       0xa8 0x00000000 0x0 0x00001000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
 		smmu: iommu@5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 9e54747..951e14a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -107,6 +107,8 @@ &fec1 {
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
 	fsl,magic-packet;
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 1e5e115..cc7152e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -68,6 +68,7 @@ A53_0: cpu@0 {
 			nvmem-cells = <&cpu_speed_grade>;
 			nvmem-cell-names = "speed_grade";
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_1: cpu@1 {
@@ -80,6 +81,7 @@ A53_1: cpu@1 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_2: cpu@2 {
@@ -92,6 +94,7 @@ A53_2: cpu@2 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_3: cpu@3 {
@@ -104,6 +107,7 @@ A53_3: cpu@3 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -204,6 +208,38 @@ timer {
 		arm,no-tick-in-suspend;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	usbphynop1: usbphynop1 {
 		compatible = "usb-nop-xceiv";
 		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
@@ -227,7 +263,8 @@ soc@0 {
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x301f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -363,6 +400,13 @@ gpio5: gpio@30240000 {
 				gpio-ranges = <&iomuxc 0 119 30>;
 			};
 
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+				#thermal-sensor-cells = <0>;
+			};
+
 			wdog1: watchdog@30280000 {
 				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
 				reg = <0x30280000 0x10000>;
@@ -455,6 +499,8 @@ snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
@@ -496,7 +542,8 @@ src: reset-controller@30390000 {
 		};
 
 		aips2: bus@30400000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x305f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -555,10 +602,12 @@ system_counter: timer@306a0000 {
 		};
 
 		aips3: bus@30800000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x309f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x30800000 0x30800000 0x400000>;
+			ranges = <0x30800000 0x30800000 0x400000>,
+				 <0x8000000 0x8000000 0x10000000>;
 
 			ecspi1: spi@30820000 {
 				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
@@ -760,6 +809,19 @@ usdhc3: mmc@30b60000 {
 				status = "disabled";
 			};
 
+			flexspi: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
+					 <&clk IMX8MM_CLK_QSPI_ROOT>;
+				clock-names = "fspi", "fspi_en";
+				status = "disabled";
+			};
+
 			sdma1: dma-controller@30bd0000 {
 				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
@@ -800,7 +862,8 @@ fec1: ethernet@30be0000 {
 		};
 
 		aips4: bus@32c00000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32df0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -896,7 +959,6 @@ ddrc: memory-controller@3d400000 {
 		ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 0d2ec4a..85fc0aa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -102,6 +102,20 @@ typec1_con: connector {
 	};
 };
 
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -202,6 +216,13 @@ MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
 		>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index a44b543..fa78f01 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "imx8mn-pinfunc.h"
 
@@ -67,6 +68,7 @@ A53_0: cpu@0 {
 			nvmem-cells = <&cpu_speed_grade>;
 			nvmem-cell-names = "speed_grade";
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_1: cpu@1 {
@@ -79,6 +81,7 @@ A53_1: cpu@1 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_2: cpu@2 {
@@ -91,6 +94,7 @@ A53_2: cpu@2 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_3: cpu@3 {
@@ -103,6 +107,7 @@ A53_3: cpu@3 {
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -116,7 +121,7 @@ a53_opp_table: opp-table {
 
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <850000>;
+			opp-microvolt = <950000>;
 			opp-supported-hw = <0xb00>, <0x7>;
 			clock-latency-ns = <150000>;
 			opp-suspend;
@@ -186,6 +191,38 @@ psci {
 		method = "smc";
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
@@ -203,8 +240,8 @@ soc@0 {
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "simple-bus";
-			reg = <0x30000000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x301f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -274,6 +311,13 @@ gpio5: gpio@30240000 {
 				gpio-ranges = <&iomuxc 0 119 30>;
 			};
 
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
+				#thermal-sensor-cells = <0>;
+			};
+
 			wdog1: watchdog@30280000 {
 				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
 				reg = <0x30280000 0x10000>;
@@ -358,6 +402,7 @@ snvs_rtc: snvs-rtc-lp {
 					offset = <0x34>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
 					clock-names = "snvs-rtc";
 				};
 
@@ -365,6 +410,8 @@ snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
@@ -379,6 +426,16 @@ clk: clock-controller@30380000 {
 					 <&clk_ext3>, <&clk_ext4>;
 				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
 					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MN_CLK_NOC>,
+						<&clk IMX8MN_CLK_AUDIO_AHB>,
+						<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
+						<&clk IMX8MN_SYS_PLL3>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL3_OUT>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>,
+							<400000000>,
+							<400000000>,
+							<600000000>;
 			};
 
 			src: reset-controller@30390000 {
@@ -390,8 +447,8 @@ src: reset-controller@30390000 {
 		};
 
 		aips2: bus@30400000 {
-			compatible = "simple-bus";
-			reg = <0x30400000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x305f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -450,8 +507,8 @@ system_counter: timer@306a0000 {
 		};
 
 		aips3: bus@30800000 {
-			compatible = "simple-bus";
-			reg = <0x30800000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x309f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -543,19 +600,19 @@ crypto: crypto@30900000 {
 					 <&clk IMX8MN_CLK_IPG_ROOT>;
 				clock-names = "aclk", "ipg";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x1000 0x1000>;
 					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x2000 0x1000>;
 					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr2: jr2@3000 {
+				sec_jr2: jr@3000 {
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x3000 0x1000>;
 					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -696,8 +753,8 @@ fec1: ethernet@30be0000 {
 		};
 
 		aips4: bus@32c00000 {
-			compatible = "simple-bus";
-			reg = <0x32c00000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32df0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
new file mode 100644
index 0000000..3da1fff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "NXP i.MX8MPlus EVK board";
+	compatible = "fsl,imx8mp-evk", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "yellow:status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grp-gpio {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
new file mode 100644
index 0000000..da78f89
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -0,0 +1,931 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __DTS_IMX8MP_PINFUNC_H
+#define __DTS_IMX8MP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00                          0x014 0x274 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT  0x014 0x274 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__MEDIAMIX_ISP_FL_TRIG_0              0x014 0x274 0x5D4 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__ANAMIX_REF_CLK_32K                  0x014 0x274 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_EXT_CLK1               0x014 0x274 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__SJC_FAIL                            0x014 0x274 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01                          0x018 0x278 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT                            0x018 0x278 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__MEDIAMIX_ISP_SHUTTER_TRIG_0         0x018 0x278 0x5DC 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__ANAMIX_REF_CLK_24M                  0x018 0x278 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__CCMSRCGPCMIX_EXT_CLK2               0x018 0x278 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__SJC_ACTIVE                          0x018 0x278 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02                          0x01C 0x27C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B                        0x01C 0x27C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__MEDIAMIX_ISP_FLASH_TRIG_0           0x01C 0x27C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_ANY                      0x01C 0x27C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__SJC_DE_B                            0x01C 0x27C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03                          0x020 0x280 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT                      0x020 0x280 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__MEDIAMIX_ISP_PRELIGHT_TRIG_0        0x020 0x280 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__SDMA1_EXT_EVENT00                   0x020 0x280 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__ANAMIX_XTAL_OK                      0x020 0x280 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__SJC_DONE                            0x020 0x280 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04                          0x024 0x284 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT                      0x024 0x284 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__MEDIAMIX_ISP_SHUTTER_OPEN_0         0x024 0x284 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__SDMA1_EXT_EVENT01                   0x024 0x284 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__ANAMIX_XTAL_OK_LV                   0x024 0x284 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__USDHC1_TEST_TRIG                    0x024 0x284 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05                          0x028 0x288 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__M7_NMI                              0x028 0x288 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__MEDIAMIX_ISP_FL_TRIG_1              0x028 0x288 0x5D8 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_PMIC_READY             0x028 0x288 0x554 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_INT_BOOT               0x028 0x288 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__USDHC2_TEST_TRIG                    0x028 0x288 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06                          0x02C 0x28C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ENET_QOS_MDC                        0x02C 0x28C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__MEDIAMIX_ISP_SHUTTER_TRIG_1         0x02C 0x28C 0x5E0 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B                         0x02C 0x28C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__CCMSRCGPCMIX_EXT_CLK3               0x02C 0x28C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ECSPI1_TEST_TRIG                    0x02C 0x28C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07                          0x030 0x290 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ENET_QOS_MDIO                       0x030 0x290 0x590 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__MEDIAMIX_ISP_FLASH_TRIG_1           0x030 0x290 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP                           0x030 0x290 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__CCMSRCGPCMIX_EXT_CLK4               0x030 0x290 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ECSPI2_TEST_TRIG                    0x030 0x290 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08                          0x034 0x294 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_IN             0x034 0x294 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__PWM1_OUT                            0x034 0x294 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__MEDIAMIX_ISP_PRELIGHT_TRIG_1        0x034 0x294 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_AUX_IN         0x034 0x294 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__USDHC2_RESET_B                      0x034 0x294 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__CCMSRCGPCMIX_WAIT                   0x034 0x294 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__FLEXSPI_TEST_TRIG                   0x034 0x294 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09                          0x038 0x298 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT            0x038 0x298 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT                            0x038 0x298 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__MEDIAMIX_ISP_SHUTTER_OPEN_1         0x038 0x298 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B                      0x038 0x298 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__AUDIOMIX_EXT_EVENT00                0x038 0x298 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__CCMSRCGPCMIX_STOP                   0x038 0x298 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__RAWNAND_TEST_TRIG                   0x038 0x298 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10                          0x03C 0x29C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__HSIOMIX_usb1_OTG_ID                 0x03C 0x29C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT                            0x03C 0x29C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__OCOTP_FUSE_LATCHED                  0x03C 0x29C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11                          0x040 0x2A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__HSIOMIX_usb2_OTG_ID                 0x040 0x2A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT                            0x040 0x2A0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__USDHC3_VSELECT                      0x040 0x2A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_PMIC_READY             0x040 0x2A0 0x554 0x5 0x1
+#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_OUT0                   0x040 0x2A0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__CAAM_RNG_OSC_OBS                    0x040 0x2A0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12                          0x044 0x2A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__HSIOMIX_usb1_OTG_PWR                0x044 0x2A4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__AUDIOMIX_EXT_EVENT01                0x044 0x2A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__CCMSRCGPCMIX_OUT1                   0x044 0x2A4 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__CSU_CSU_ALARM_AUT00                 0x044 0x2A4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13                          0x048 0x2A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__HSIOMIX_usb1_OTG_OC                 0x048 0x2A8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__PWM2_OUT                            0x048 0x2A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__CCMSRCGPCMIX_OUT2                   0x048 0x2A8 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__CSU_CSU_ALARM_AUT01                 0x048 0x2A8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                          0x04C 0x2AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__HSIOMIX_usb2_OTG_PWR                0x04C 0x2AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__USDHC3_CD_B                         0x04C 0x2AC 0x608 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT                            0x04C 0x2AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__CCMSRCGPCMIX_CLKO1                  0x04C 0x2AC 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__CSU_CSU_ALARM_AUT02                 0x04C 0x2AC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                          0x050 0x2B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__HSIOMIX_usb2_OTG_OC                 0x050 0x2B0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__USDHC3_WP                           0x050 0x2B0 0x634 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT                            0x050 0x2B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__CCMSRCGPCMIX_CLKO2                  0x050 0x2B0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__CSU_CSU_INT_DEB                     0x050 0x2B0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC                          0x054 0x2B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_MDC__AUDIOMIX_SAI6_TX_DATA00               0x054 0x2B4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16                            0x054 0x2B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDC__USDHC3_STROBE                         0x054 0x2B4 0x630 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDC__SIM_M_HADDR15                         0x054 0x2B4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO                        0x058 0x2B8 0x590 0x0 0x1
+#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_SAI6_TX_SYNC                0x058 0x2B8 0x528 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17                           0x058 0x2B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__USDHC3_DATA5                         0x058 0x2B8 0x624 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__SIM_M_HADDR16                        0x058 0x2B8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3                    0x05C 0x2BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_SAI6_TX_BCLK                 0x05C 0x2BC 0x524 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD3__GPIO1_IO18                            0x05C 0x2BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD3__USDHC3_DATA6                          0x05C 0x2BC 0x628 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD3__SIM_M_HADDR17                         0x05C 0x2BC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2                    0x060 0x2C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK   0x060 0x2C0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_SAI6_RX_DATA00               0x060 0x2C0 0x51C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19                            0x060 0x2C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD2__USDHC3_DATA7                          0x060 0x2C0 0x62C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD2__SIM_M_HADDR18                         0x060 0x2C0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1                    0x064 0x2C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_SAI6_RX_SYNC                 0x064 0x2C4 0x520 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20                            0x064 0x2C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD1__USDHC3_CD_B                           0x064 0x2C4 0x608 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TD1__SIM_M_HADDR19                         0x064 0x2C4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0                    0x068 0x2C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_SAI6_RX_BCLK                 0x068 0x2C8 0x518 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21                            0x068 0x2C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD0__USDHC3_WP                             0x068 0x2C8 0x634 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TD0__SIM_M_HADDR20                         0x068 0x2C8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL              0x06C 0x2CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SAI6_MCLK                 0x06C 0x2CC 0x514 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF_OUT                 0x06C 0x2CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22                         0x06C 0x2CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__USDHC3_DATA0                       0x06C 0x2CC 0x610 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__SIM_M_HADDR21                      0x06C 0x2CC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK    0x070 0x2D0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TXC__ENET_QOS_TX_ER                        0x070 0x2D0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TXC__AUDIOMIX_SAI7_TX_DATA00               0x070 0x2D0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23                            0x070 0x2D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TXC__USDHC3_DATA1                          0x070 0x2D0 0x614 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22                         0x070 0x2D0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x074 0x2D4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC              0x074 0x2D4 0x540 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03              0x074 0x2D4 0x4CC 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24                         0x074 0x2D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2                       0x074 0x2D4 0x618 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23                      0x074 0x2D4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x078 0x2D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER                        0x078 0x2D8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK                 0x078 0x2D8 0x53C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02                 0x078 0x2D8 0x4C8 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25                            0x078 0x2D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3                          0x078 0x2D8 0x61C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24                         0x078 0x2D8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0                    0x07C 0x2DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00               0x07C 0x2DC 0x534 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01                 0x07C 0x2DC 0x4C4 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26                            0x07C 0x2DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4                          0x07C 0x2DC 0x620 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25                         0x07C 0x2DC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1                    0x080 0x2E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC                 0x080 0x2E0 0x538 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00                 0x080 0x2E0 0x4C0 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27                            0x080 0x2E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B                        0x080 0x2E0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26                         0x080 0x2E0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2                    0x084 0x2E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_SAI7_RX_BCLK                 0x084 0x2E4 0x530 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_CLK                          0x084 0x2E4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD2__GPIO1_IO28                            0x084 0x2E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD2__USDHC3_CLK                            0x084 0x2E4 0x604 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD2__SIM_M_HADDR27                         0x084 0x2E4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3                    0x088 0x2E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SAI7_MCLK                    0x088 0x2E8 0x52C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF_IN                     0x088 0x2E8 0x544 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29                            0x088 0x2E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD3__USDHC3_CMD                            0x088 0x2E8 0x60C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD3__SIM_M_HADDR28                         0x088 0x2E8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK                             0x08C 0x2EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CLK__ENET1_MDC                              0x08C 0x2EC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CLK__I2C5_SCL                               0x08C 0x2EC 0x5C4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX                           0x08C 0x2EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DTE_RX                           0x08C 0x2EC 0x5E8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00                             0x08C 0x2EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_CLK__SIM_M_HADDR29                          0x08C 0x2EC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD                             0x090 0x2F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CMD__ENET1_MDIO                             0x090 0x2F0 0x57C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CMD__I2C5_SDA                               0x090 0x2F0 0x5C8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX                           0x090 0x2F0 0x5E8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DTE_TX                           0x090 0x2F0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01                             0x090 0x2F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_CMD__SIM_M_HADDR30                          0x090 0x2F0 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0                         0x094 0x2F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__ENET1_RGMII_TD1                      0x094 0x2F4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL                             0x094 0x2F4 0x5CC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DCE_RTS                        0x094 0x2F4 0x5E4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DTE_CTS                        0x094 0x2F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02                           0x094 0x2F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__SIM_M_HADDR31                        0x094 0x2F4 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1                         0x098 0x2F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__ENET1_RGMII_TD0                      0x098 0x2F8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA                             0x098 0x2F8 0x5D0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS                        0x098 0x2F8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DTE_RTS                        0x098 0x2F8 0x5E4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03                           0x098 0x2F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__SIM_M_HBURST00                       0x098 0x2F8 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2                         0x09C 0x2FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__ENET1_RGMII_RD0                      0x09C 0x2FC 0x580 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__I2C4_SCL                             0x09C 0x2FC 0x5BC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX                         0x09C 0x2FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DTE_RX                         0x09C 0x2FC 0x5F0 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04                           0x09C 0x2FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__SIM_M_HBURST01                       0x09C 0x2FC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3                         0x0A0 0x300 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__ENET1_RGMII_RD1                      0x0A0 0x300 0x584 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__I2C4_SDA                             0x0A0 0x300 0x5C0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX                         0x0A0 0x300 0x5F0 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DTE_TX                         0x0A0 0x300 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05                           0x0A0 0x300 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__SIM_M_HBURST02                       0x0A0 0x300 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4                         0x0A4 0x304 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__ENET1_RGMII_TX_CTL                   0x0A4 0x304 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL                             0x0A4 0x304 0x5A4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS                        0x0A4 0x304 0x5EC 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS                        0x0A4 0x304 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06                           0x0A4 0x304 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__SIM_M_HRESP                          0x0A4 0x304 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5                         0x0A8 0x308 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__ENET1_TX_ER                          0x0A8 0x308 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA                             0x0A8 0x308 0x5A8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS                        0x0A8 0x308 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS                        0x0A8 0x308 0x5EC 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07                           0x0A8 0x308 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__TPSMP_HDATA05                        0x0A8 0x308 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6                         0x0AC 0x30C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__ENET1_RGMII_RX_CTL                   0x0AC 0x30C 0x588 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__I2C2_SCL                             0x0AC 0x30C 0x5AC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX                         0x0AC 0x30C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX                         0x0AC 0x30C 0x5F8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08                           0x0AC 0x30C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__TPSMP_HDATA06                        0x0AC 0x30C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7                         0x0B0 0x310 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__ENET1_RX_ER                          0x0B0 0x310 0x58C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__I2C2_SDA                             0x0B0 0x310 0x5B0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX                         0x0B0 0x310 0x5F8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX                         0x0B0 0x310 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09                           0x0B0 0x310 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__TPSMP_HDATA07                        0x0B0 0x310 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B                     0x0B4 0x314 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__ENET1_TX_CLK                       0x0B4 0x314 0x578 0x1 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL                           0x0B4 0x314 0x5B4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS                      0x0B4 0x314 0x5F4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS                      0x0B4 0x314 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10                         0x0B4 0x314 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__ECSPI3_TEST_TRIG                   0x0B4 0x314 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE                       0x0B8 0x318 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA                            0x0B8 0x318 0x5B8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS                       0x0B8 0x318 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS                       0x0B8 0x318 0x5F4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11                          0x0B8 0x318 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__USDHC3_TEST_TRIG                    0x0B8 0x318 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B                           0x0BC 0x31C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12                            0x0BC 0x31C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__CCMSRCGPCMIX_TESTER_ACK               0x0BC 0x31C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                             0x0C0 0x320 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CLK__ECSPI2_SCLK                            0x0C0 0x320 0x568 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DCE_RX                           0x0C0 0x320 0x600 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DTE_TX                           0x0C0 0x320 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13                             0x0C0 0x320 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                  0x0C0 0x320 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_CLK__OBSERVE_MUX_OUT00                      0x0C0 0x320 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                             0x0C4 0x324 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CMD__ECSPI2_MOSI                            0x0C4 0x324 0x570 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DCE_TX                           0x0C4 0x324 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DTE_RX                           0x0C4 0x324 0x600 0x3 0x1
+#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_CLK                           0x0C4 0x324 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14                             0x0C4 0x324 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                  0x0C4 0x324 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_CMD__OBSERVE_MUX_OUT01                      0x0C4 0x324 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                         0x0C8 0x328 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA                             0x0C8 0x328 0x5C0 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX                         0x0C8 0x328 0x5F0 0x3 0x2
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX                         0x0C8 0x328 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00                0x0C8 0x328 0x4C0 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15                           0x0C8 0x328 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                0x0C8 0x328 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02                    0x0C8 0x328 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                         0x0CC 0x32C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__I2C4_SCL                             0x0CC 0x32C 0x5BC 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DCE_TX                         0x0CC 0x32C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DTE_RX                         0x0CC 0x32C 0x5F0 0x3 0x3
+#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_BIT_STREAM01                0x0CC 0x32C 0x4C4 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16                           0x0CC 0x32C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__CCMSRCGPCMIX_WAIT                    0x0CC 0x32C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__OBSERVE_MUX_OUT03                    0x0CC 0x32C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                         0x0D0 0x330 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__ECSPI2_SS0                           0x0D0 0x330 0x574 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF_OUT                   0x0D0 0x330 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_BIT_STREAM02                0x0D0 0x330 0x4C8 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17                           0x0D0 0x330 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__CCMSRCGPCMIX_STOP                    0x0D0 0x330 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__OBSERVE_MUX_OUT04                    0x0D0 0x330 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                         0x0D4 0x334 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO                          0x0D4 0x334 0x56C 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN                    0x0D4 0x334 0x544 0x3 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03                0x0D4 0x334 0x4CC 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18                           0x0D4 0x334 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET             0x0D4 0x334 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B                     0x0D8 0x338 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19                         0x0D8 0x338 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET          0x0D8 0x338 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_WP__USDHC2_WP                               0x0DC 0x33C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_WP__GPIO2_IO20                              0x0DC 0x33C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_WP__CORESIGHT_EVENTI                        0x0DC 0x33C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_WP__SIM_M_HMASTLOCK                         0x0DC 0x33C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_ALE__RAWNAND_ALE                           0x0E0 0x340 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK                        0x0E0 0x340 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_ALE__AUDIOMIX_SAI3_TX_BCLK                 0x0E0 0x340 0x4E8 0x2 0x0
+#define MX8MP_IOMUXC_NAND_ALE__MEDIAMIX_ISP_FL_TRIG_0                0x0E0 0x340 0x5D4 0x3 0x1
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX                          0x0E0 0x340 0x5F8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DTE_TX                          0x0E0 0x340 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00                            0x0E0 0x340 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_ALE__CORESIGHT_TRACE_CLK                   0x0E0 0x340 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_ALE__SIM_M_HPROT00                         0x0E0 0x340 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__RAWNAND_CE0_B                       0x0E4 0x344 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B                     0x0E4 0x344 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__AUDIOMIX_SAI3_TX_DATA00             0x0E4 0x344 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__MEDIAMIX_ISP_SHUTTER_TRIG_0         0x0E4 0x344 0x5DC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX                        0x0E4 0x344 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DTE_RX                        0x0E4 0x344 0x5F8 0x4 0x3
+#define MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01                          0x0E4 0x344 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__CORESIGHT_TRACE_CTL                 0x0E4 0x344 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__SIM_M_HPROT01                       0x0E4 0x344 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__RAWNAND_CE1_B                       0x0E8 0x348 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__FLEXSPI_A_SS1_B                     0x0E8 0x348 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE                       0x0E8 0x348 0x630 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE1_B__I2C4_SCL                            0x0E8 0x348 0x5BC 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02                          0x0E8 0x348 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__CORESIGHT_TRACE00                   0x0E8 0x348 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__SIM_M_HPROT02                       0x0E8 0x348 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__RAWNAND_CE2_B                       0x0EC 0x34C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__FLEXSPI_B_SS0_B                     0x0EC 0x34C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5                        0x0EC 0x34C 0x624 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE2_B__I2C4_SDA                            0x0EC 0x34C 0x5C0 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE2_B__GPIO3_IO03                          0x0EC 0x34C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__CORESIGHT_TRACE01                   0x0EC 0x34C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__SIM_M_HPROT03                       0x0EC 0x34C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__RAWNAND_CE3_B                       0x0F0 0x350 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__FLEXSPI_B_SS1_B                     0x0F0 0x350 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6                        0x0F0 0x350 0x628 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__I2C3_SDA                            0x0F0 0x350 0x5B8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__GPIO3_IO04                          0x0F0 0x350 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__CORESIGHT_TRACE02                   0x0F0 0x350 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__SIM_M_HADDR00                       0x0F0 0x350 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_CLE__RAWNAND_CLE                           0x0F4 0x354 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CLE__FLEXSPI_B_SCLK                        0x0F4 0x354 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7                          0x0F4 0x354 0x62C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DCE_RX                          0x0F4 0x354 0x600 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DTE_TX                          0x0F4 0x354 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CLE__GPIO3_IO05                            0x0F4 0x354 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CLE__CORESIGHT_TRACE03                     0x0F4 0x354 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CLE__SIM_M_HADDR01                         0x0F4 0x354 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__RAWNAND_DATA00                     0x0F8 0x358 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00                   0x0F8 0x358 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__AUDIOMIX_SAI3_RX_DATA00            0x0F8 0x358 0x4E4 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__MEDIAMIX_ISP_FLASH_TRIG_0          0x0F8 0x358 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX                       0x0F8 0x358 0x600 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DTE_TX                       0x0F8 0x358 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06                         0x0F8 0x358 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__CORESIGHT_TRACE04                  0x0F8 0x358 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__SIM_M_HADDR02                      0x0F8 0x358 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__RAWNAND_DATA01                     0x0FC 0x35C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01                   0x0FC 0x35C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC              0x0FC 0x35C 0x4EC 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__MEDIAMIX_ISP_PRELIGHT_TRIG_0       0x0FC 0x35C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DCE_TX                       0x0FC 0x35C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DTE_RX                       0x0FC 0x35C 0x600 0x4 0x4
+#define MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07                         0x0FC 0x35C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__CORESIGHT_TRACE05                  0x0FC 0x35C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__SIM_M_HADDR03                      0x0FC 0x35C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__RAWNAND_DATA02                     0x100 0x360 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02                   0x100 0x360 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__USDHC3_CD_B                        0x100 0x360 0x608 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS                      0x100 0x360 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DTE_RTS                      0x100 0x360 0x5FC 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__I2C4_SDA                           0x100 0x360 0x5C0 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08                         0x100 0x360 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__CORESIGHT_TRACE06                  0x100 0x360 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__SIM_M_HADDR04                      0x100 0x360 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__RAWNAND_DATA03                     0x104 0x364 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03                   0x104 0x364 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__USDHC3_WP                          0x104 0x364 0x634 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS                      0x104 0x364 0x5FC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DTE_CTS                      0x104 0x364 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__MEDIAMIX_ISP_FL_TRIG_1             0x104 0x364 0x5D8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09                         0x104 0x364 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__CORESIGHT_TRACE07                  0x104 0x364 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__SIM_M_HADDR05                      0x104 0x364 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__RAWNAND_DATA04                     0x108 0x368 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_B_DATA00                   0x108 0x368 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0                       0x108 0x368 0x610 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_A_DATA04                   0x108 0x368 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__MEDIAMIX_ISP_SHUTTER_TRIG_1        0x108 0x368 0x5E0 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10                         0x108 0x368 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__CORESIGHT_TRACE08                  0x108 0x368 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__SIM_M_HADDR06                      0x108 0x368 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__RAWNAND_DATA05                     0x10C 0x36C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_B_DATA01                   0x10C 0x36C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1                       0x10C 0x36C 0x614 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_A_DATA05                   0x10C 0x36C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__MEDIAMIX_ISP_FLASH_TRIG_1          0x10C 0x36C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11                         0x10C 0x36C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__CORESIGHT_TRACE09                  0x10C 0x36C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__SIM_M_HADDR07                      0x10C 0x36C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__RAWNAND_DATA06                     0x110 0x370 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_B_DATA02                   0x110 0x370 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2                       0x110 0x370 0x618 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_A_DATA06                   0x110 0x370 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__MEDIAMIX_ISP_PRELIGHT_TRIG_1       0x110 0x370 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12                         0x110 0x370 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__CORESIGHT_TRACE10                  0x110 0x370 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__SIM_M_HADDR08                      0x110 0x370 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__RAWNAND_DATA07                     0x114 0x374 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_B_DATA03                   0x114 0x374 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3                       0x114 0x374 0x61C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_A_DATA07                   0x114 0x374 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__MEDIAMIX_ISP_SHUTTER_OPEN_1        0x114 0x374 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13                         0x114 0x374 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__CORESIGHT_TRACE11                  0x114 0x374 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__SIM_M_HADDR09                      0x114 0x374 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_DQS__RAWNAND_DQS                           0x118 0x378 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS                         0x118 0x378 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DQS__AUDIOMIX_SAI3_MCLK                    0x118 0x378 0x4E0 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DQS__MEDIAMIX_ISP_SHUTTER_OPEN_0           0x118 0x378 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DQS__I2C3_SCL                              0x118 0x378 0x5B4 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14                            0x118 0x378 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DQS__CORESIGHT_TRACE12                     0x118 0x378 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DQS__SIM_M_HADDR10                         0x118 0x378 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__RAWNAND_RE_B                         0x11C 0x37C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__FLEXSPI_B_DQS                        0x11C 0x37C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4                         0x11C 0x37C 0x620 0x2 0x1
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DCE_TX                         0x11C 0x37C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DTE_RX                         0x11C 0x37C 0x600 0x4 0x5
+#define MX8MP_IOMUXC_NAND_RE_B__GPIO3_IO15                           0x11C 0x37C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__CORESIGHT_TRACE13                    0x11C 0x37C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__SIM_M_HADDR11                        0x11C 0x37C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__RAWNAND_READY_B                   0x120 0x380 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B                    0x120 0x380 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__I2C3_SCL                          0x120 0x380 0x5B4 0x4 0x2
+#define MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16                        0x120 0x380 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__CORESIGHT_TRACE14                 0x120 0x380 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__SIM_M_HADDR12                     0x120 0x380 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__RAWNAND_WE_B                         0x124 0x384 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK                           0x124 0x384 0x604 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WE_B__I2C3_SDA                             0x124 0x384 0x5B8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17                           0x124 0x384 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__CORESIGHT_TRACE15                    0x124 0x384 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__SIM_M_HADDR13                        0x124 0x384 0x000 0x7 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__RAWNAND_WP_B                         0x128 0x388 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD                           0x128 0x388 0x60C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WP_B__I2C4_SCL                             0x128 0x388 0x5BC 0x4 0x3
+#define MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18                           0x128 0x388 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__CORESIGHT_EVENTO                     0x128 0x388 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__SIM_M_HADDR14                        0x128 0x388 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x12C 0x38C 0x508 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00              0x12C 0x38C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT                             0x12C 0x38C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL                             0x12C 0x38C 0x5CC 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19                           0x12C 0x38C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x130 0x390 0x4F4 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI1_TX_DATA01               0x130 0x390 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT                              0x130 0x390 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA                              0x130 0x390 0x5D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_CLK                          0x130 0x390 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20                            0x130 0x390 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x134 0x394 0x4F8 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02              0x134 0x394 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT                             0x134 0x394 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL                             0x134 0x394 0x5C4 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00                0x134 0x394 0x4C0 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21                           0x134 0x394 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x138 0x398 0x4FC 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03              0x138 0x398 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC                0x138 0x398 0x4D8 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC                0x138 0x398 0x510 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01                0x138 0x398 0x4C4 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22                           0x138 0x398 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX                              0x138 0x398 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x13C 0x39C 0x500 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04              0x13C 0x39C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC                0x13C 0x39C 0x4D8 0x2 0x1
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK                0x13C 0x39C 0x50C 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02                0x13C 0x39C 0x4C8 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23                           0x13C 0x39C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX                              0x13C 0x39C 0x54C 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x140 0x3A0 0x504 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05              0x140 0x3A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC                0x140 0x3A0 0x4D8 0x2 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00              0x140 0x3A0 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03                0x140 0x3A0 0x4CC 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24                           0x140 0x3A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX                              0x140 0x3A0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK                   0x144 0x3A4 0x4F0 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x144 0x3A4 0x4D4 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__PWM1_OUT                             0x144 0x3A4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA                             0x144 0x3A4 0x5C8 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25                           0x144 0x3A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX                              0x144 0x3A4 0x550 0x6 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI1_RX_SYNC                0x148 0x3A8 0x4D0 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x148 0x3A8 0x508 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN                 0x148 0x3A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00                           0x148 0x3A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI1_RX_BCLK                 0x14C 0x3AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x14C 0x3AC 0x4F4 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_CLK                          0x14C 0x3AC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT                 0x14C 0x3AC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01                            0x14C 0x3AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00              0x150 0x3B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x150 0x3B0 0x4F8 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01              0x150 0x3B0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00                0x150 0x3B0 0x4C0 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN                 0x150 0x3B0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02                           0x150 0x3B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01              0x154 0x3B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x154 0x3B4 0x4FC 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01                0x154 0x3B4 0x4C4 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT                0x154 0x3B4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03                           0x154 0x3B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02              0x158 0x3B8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x158 0x3B8 0x500 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02                0x158 0x3B8 0x4C8 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC                            0x158 0x3B8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04                           0x158 0x3B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03              0x15C 0x3BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x15C 0x3BC 0x504 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03                0x15C 0x3BC 0x4CC 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO                           0x15C 0x3BC 0x57C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05                           0x15C 0x3BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04              0x160 0x3C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK                0x160 0x3C0 0x524 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_RX_BCLK                0x160 0x3C0 0x518 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0                      0x160 0x3C0 0x580 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06                           0x160 0x3C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_DATA05              0x164 0x3C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_TX_DATA00              0x164 0x3C4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00              0x164 0x3C4 0x51C 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_SYNC                0x164 0x3C4 0x4D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1                      0x164 0x3C4 0x584 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07                           0x164 0x3C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI1_RX_DATA06              0x168 0x3C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_TX_SYNC                0x168 0x3C8 0x528 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_RX_SYNC                0x168 0x3C8 0x520 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2                      0x168 0x3C8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08                           0x168 0x3C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_RX_DATA07              0x16C 0x3CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI6_MCLK                   0x16C 0x3CC 0x514 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_SYNC                0x16C 0x3CC 0x4D8 0x2 0x3
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_DATA04              0x16C 0x3CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3                      0x16C 0x3CC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09                           0x16C 0x3CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI1_TX_SYNC                0x170 0x3D0 0x4D8 0x0 0x4
+#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI5_TX_SYNC                0x170 0x3D0 0x510 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL                   0x170 0x3D0 0x588 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXFS__GPIO4_IO10                           0x170 0x3D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI1_TX_BCLK                 0x174 0x3D4 0x4D4 0x0 0x1
+#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI5_TX_BCLK                 0x174 0x3D4 0x50C 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC                       0x174 0x3D4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11                            0x174 0x3D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI1_TX_DATA00              0x178 0x3D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI5_TX_DATA00              0x178 0x3D8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0                      0x178 0x3D8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12                           0x178 0x3D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI1_TX_DATA01              0x17C 0x3DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI5_TX_DATA01              0x17C 0x3DC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1                      0x17C 0x3DC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13                           0x17C 0x3DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI1_TX_DATA02              0x180 0x3E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI5_TX_DATA02              0x180 0x3E0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2                      0x180 0x3E0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14                           0x180 0x3E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI1_TX_DATA03              0x184 0x3E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI5_TX_DATA03              0x184 0x3E4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3                      0x184 0x3E4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15                           0x184 0x3E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI1_TX_DATA04              0x188 0x3E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_RX_BCLK                0x188 0x3E8 0x518 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_TX_BCLK                0x188 0x3E8 0x524 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL                   0x188 0x3E8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16                           0x188 0x3E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI1_TX_DATA05              0x18C 0x3EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_RX_DATA00              0x18C 0x3EC 0x51C 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00              0x18C 0x3EC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC                      0x18C 0x3EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17                           0x18C 0x3EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI1_TX_DATA06              0x190 0x3F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_RX_SYNC                0x190 0x3F0 0x520 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC                0x190 0x3F0 0x528 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER                          0x190 0x3F0 0x58C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18                           0x190 0x3F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI1_TX_DATA07              0x194 0x3F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK                   0x194 0x3F4 0x514 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_CLK                         0x194 0x3F4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__ENET1_TX_ER                          0x194 0x3F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19                           0x194 0x3F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK                   0x198 0x3F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI5_MCLK                   0x198 0x3F8 0x4F0 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x198 0x3F8 0x4D4 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK                         0x198 0x3F8 0x578 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20                           0x198 0x3F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC                0x19C 0x3FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_SYNC                0x19C 0x3FC 0x510 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_DATA01              0x19C 0x3FC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x19C 0x3FC 0x4DC 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX                         0x19C 0x3FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX                         0x19C 0x3FC 0x5E8 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21                           0x19C 0x3FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02                0x19C 0x3FC 0x4C8 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00                        0x19C 0x3FC 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK                 0x1A0 0x400 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK                 0x1A0 0x400 0x50C 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXC__CAN1_TX                               0x1A0 0x400 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX                          0x1A0 0x400 0x5E8 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX                          0x1A0 0x400 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                            0x1A0 0x400 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01                 0x1A0 0x400 0x4C4 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01                         0x1A0 0x400 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00              0x1A4 0x404 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00              0x1A4 0x404 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT             0x1A4 0x404 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_TX_DATA01              0x1A4 0x404 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS                        0x1A4 0x404 0x5E4 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS                        0x1A4 0x404 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23                           0x1A4 0x404 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03                0x1A4 0x404 0x4CC 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02                        0x1A4 0x404 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC                0x1A8 0x408 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01              0x1A8 0x408 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__ENET_QOS_1588_EVENT3_OUT             0x1A8 0x408 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1A8 0x408 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS                        0x1A8 0x408 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS                        0x1A8 0x408 0x5E4 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24                           0x1A8 0x408 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02                0x1A8 0x408 0x4C8 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE                         0x1A8 0x408 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK                 0x1AC 0x40C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02               0x1AC 0x40C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX                               0x1AC 0x40C 0x54C 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25                            0x1AC 0x40C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01                 0x1AC 0x40C 0x4C4 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT                       0x1AC 0x40C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00              0x1B0 0x410 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03              0x1B0 0x410 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN              0x1B0 0x410 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX                              0x1B0 0x410 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_AUX_IN          0x1B0 0x410 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26                           0x1B0 0x410 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__CCMSRCGPCMIX_BOOT_MODE04             0x1B0 0x410 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__TPSMP_CLK                            0x1B0 0x410 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK                   0x1B4 0x414 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI5_MCLK                   0x1B4 0x414 0x4F0 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_IN              0x1B4 0x414 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX                              0x1B4 0x414 0x550 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_AUX_IN          0x1B4 0x414 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27                           0x1B4 0x414 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI3_MCLK                   0x1B4 0x414 0x4E0 0x6 0x1
+#define MX8MP_IOMUXC_SAI2_MCLK__TPSMP_HDATA_DIR                      0x1B4 0x414 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC                0x1B8 0x418 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x1B8 0x418 0x4DC 0x1 0x1
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x1B8 0x418 0x508 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01              0x1B8 0x418 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN                    0x1B8 0x418 0x544 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28                           0x1B8 0x418 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00                0x1B8 0x418 0x4C0 0x6 0x4
+#define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00                       0x1B8 0x418 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK                 0x1BC 0x41C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02               0x1BC 0x41C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x1BC 0x41C 0x4F4 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPT1_CLK                              0x1BC 0x41C 0x59C 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS                         0x1BC 0x41C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DTE_RTS                         0x1BC 0x41C 0x5EC 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29                            0x1BC 0x41C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_CLK                          0x1BC 0x41C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__TPSMP_HTRANS01                        0x1BC 0x41C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00               0x1C0 0x420 0x4E4 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI2_RX_DATA03               0x1C0 0x420 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00               0x1C0 0x420 0x4F8 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS                         0x1C0 0x420 0x5EC 0x4 0x3
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS                         0x1C0 0x420 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30                            0x1C0 0x420 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01                 0x1C0 0x420 0x4C4 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00                         0x1C0 0x420 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC                0x1C4 0x424 0x4EC 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1C4 0x424 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI5_RX_DATA01              0x1C4 0x424 0x4FC 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01              0x1C4 0x424 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX                         0x1C4 0x424 0x5F0 0x4 0x4
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX                         0x1C4 0x424 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31                           0x1C4 0x424 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03                0x1C4 0x424 0x4CC 0x6 0x5
+#define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01                        0x1C4 0x424 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK                 0x1C8 0x428 0x4E8 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02               0x1C8 0x428 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI5_RX_DATA02               0x1C8 0x428 0x500 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXC__GPT1_CAPTURE1                         0x1C8 0x428 0x594 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX                          0x1C8 0x428 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX                          0x1C8 0x428 0x5F0 0x4 0x5
+#define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00                            0x1C8 0x428 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02                 0x1C8 0x428 0x4C8 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02                         0x1C8 0x428 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00               0x1CC 0x42C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03               0x1CC 0x42C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI5_RX_DATA03               0x1CC 0x42C 0x504 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXD__GPT1_CAPTURE2                         0x1CC 0x42C 0x598 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF_EXT_CLK                0x1CC 0x42C 0x548 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01                            0x1CC 0x42C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__CCMSRCGPCMIX_BOOT_MODE05              0x1CC 0x42C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__TPSMP_HDATA03                         0x1CC 0x42C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK                   0x1D0 0x430 0x4E0 0x0 0x2
+#define MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT                             0x1D0 0x430 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI5_MCLK                   0x1D0 0x430 0x4F0 0x2 0x3
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_OUT                   0x1D0 0x430 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02                           0x1D0 0x430 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_IN                    0x1D0 0x430 0x544 0x6 0x3
+#define MX8MP_IOMUXC_SAI3_MCLK__TPSMP_HDATA04                        0x1D0 0x430 0x000 0x7 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF_OUT                    0x1D4 0x434 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT                              0x1D4 0x434 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL                              0x1D4 0x434 0x5C4 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_TX__GPT1_COMPARE1                         0x1D4 0x434 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__CAN1_TX                               0x1D4 0x434 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03                            0x1D4 0x434 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF_IN                     0x1D8 0x438 0x544 0x0 0x4
+#define MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT                              0x1D8 0x438 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA                              0x1D8 0x438 0x5C8 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPT1_COMPARE2                         0x1D8 0x438 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__CAN1_RX                               0x1D8 0x438 0x54C 0x4 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04                            0x1D8 0x438 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPT1_COMPARE3                    0x1DC 0x43C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05                       0x1DC 0x43C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF_EXT_CLK           0x1DC 0x43C 0x548 0x0 0x1
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT                         0x1DC 0x43C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK                        0x1E0 0x440 0x558 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX                       0x1E0 0x440 0x5F8 0x1 0x4
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DTE_TX                       0x1E0 0x440 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL                           0x1E0 0x440 0x5A4 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__AUDIOMIX_SAI7_RX_SYNC              0x1E0 0x440 0x538 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__GPIO5_IO06                         0x1E0 0x440 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__TPSMP_HDATA08                      0x1E0 0x440 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI                        0x1E4 0x444 0x560 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX                       0x1E4 0x444 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DTE_RX                       0x1E4 0x444 0x5F8 0x1 0x5
+#define MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA                           0x1E4 0x444 0x5A8 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__AUDIOMIX_SAI7_RX_BCLK              0x1E4 0x444 0x530 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07                         0x1E4 0x444 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__TPSMP_HDATA09                      0x1E4 0x444 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO                        0x1E8 0x448 0x55C 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS                      0x1E8 0x448 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DTE_RTS                      0x1E8 0x448 0x5F4 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI1_MISO__I2C2_SCL                           0x1E8 0x448 0x5AC 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__AUDIOMIX_SAI7_RX_DATA00            0x1E8 0x448 0x534 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08                         0x1E8 0x448 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__TPSMP_HDATA10                      0x1E8 0x448 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0                          0x1EC 0x44C 0x564 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS                       0x1EC 0x44C 0x5F4 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DTE_CTS                       0x1EC 0x44C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__I2C2_SDA                            0x1EC 0x44C 0x5B0 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__AUDIOMIX_SAI7_TX_SYNC               0x1EC 0x44C 0x540 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09                          0x1EC 0x44C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__TPSMP_HDATA11                       0x1EC 0x44C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK                        0x1F0 0x450 0x568 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX                       0x1F0 0x450 0x600 0x1 0x6
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DTE_TX                       0x1F0 0x450 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__I2C3_SCL                           0x1F0 0x450 0x5B4 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_SCLK__AUDIOMIX_SAI7_TX_BCLK              0x1F0 0x450 0x53C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10                         0x1F0 0x450 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__TPSMP_HDATA12                      0x1F0 0x450 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI                        0x1F4 0x454 0x570 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX                       0x1F4 0x454 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DTE_RX                       0x1F4 0x454 0x600 0x1 0x7
+#define MX8MP_IOMUXC_ECSPI2_MOSI__I2C3_SDA                           0x1F4 0x454 0x5B8 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_MOSI__AUDIOMIX_SAI7_TX_DATA00            0x1F4 0x454 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11                         0x1F4 0x454 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__TPSMP_HDATA13                      0x1F4 0x454 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12                         0x1F8 0x458 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__TPSMP_HDATA14                      0x1F8 0x458 0x000 0x7 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO                        0x1F8 0x458 0x56C 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS                      0x1F8 0x458 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DTE_RTS                      0x1F8 0x458 0x5FC 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL                           0x1F8 0x458 0x5BC 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_MISO__AUDIOMIX_SAI7_MCLK                 0x1F8 0x458 0x52C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__CCMSRCGPCMIX_CLKO1                 0x1F8 0x458 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0                          0x1FC 0x45C 0x574 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS                       0x1FC 0x45C 0x5FC 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DTE_CTS                       0x1FC 0x45C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA                            0x1FC 0x45C 0x5C0 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_SS0__CCMSRCGPCMIX_CLKO2                  0x1FC 0x45C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13                          0x1FC 0x45C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__TPSMP_HDATA15                       0x1FC 0x45C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL                              0x200 0x460 0x5A4 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SCL__ENET_QOS_MDC                          0x200 0x460 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK                           0x200 0x460 0x558 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14                            0x200 0x460 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__TPSMP_HDATA16                         0x200 0x460 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA                              0x204 0x464 0x5A8 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ENET_QOS_MDIO                         0x204 0x464 0x590 0x1 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI                           0x204 0x464 0x560 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15                            0x204 0x464 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SDA__TPSMP_HDATA17                         0x204 0x464 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL                              0x208 0x468 0x5AC 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_IN               0x208 0x468 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__USDHC3_CD_B                           0x208 0x468 0x608 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO                           0x208 0x468 0x55C 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_AUX_IN           0x208 0x468 0x000 0x4 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16                            0x208 0x468 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__TPSMP_HDATA18                         0x208 0x468 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA                              0x20C 0x46C 0x5B0 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SDA__ENET_QOS_1588_EVENT1_OUT              0x20C 0x46C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__USDHC3_WP                             0x20C 0x46C 0x634 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SDA__ECSPI1_SS0                            0x20C 0x46C 0x564 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17                            0x20C 0x46C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__TPSMP_HDATA19                         0x20C 0x46C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                              0x210 0x470 0x5B4 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SCL__PWM4_OUT                              0x210 0x470 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK                              0x210 0x470 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__ECSPI2_SCLK                           0x210 0x470 0x568 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18                            0x210 0x470 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__TPSMP_HDATA20                         0x210 0x470 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                              0x214 0x474 0x5B8 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT                              0x214 0x474 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK                              0x214 0x474 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__ECSPI2_MOSI                           0x214 0x474 0x570 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19                            0x214 0x474 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__TPSMP_HDATA21                         0x214 0x474 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL                              0x218 0x478 0x5BC 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SCL__PWM2_OUT                              0x218 0x478 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__HSIOMIX_PCIE_CLKREQ_B                 0x218 0x478 0x5A0 0x2 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__ECSPI2_MISO                           0x218 0x478 0x56C 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20                            0x218 0x478 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__TPSMP_HDATA22                         0x218 0x478 0x000 0x7 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA                              0x21C 0x47C 0x5C0 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT                              0x21C 0x47C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__ECSPI2_SS0                            0x21C 0x47C 0x574 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21                            0x21C 0x47C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__TPSMP_HDATA23                         0x21C 0x47C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX                         0x220 0x480 0x5E8 0x0 0x4
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DTE_TX                         0x220 0x480 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK                          0x220 0x480 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22                           0x220 0x480 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_RXD__TPSMP_HDATA24                        0x220 0x480 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX                         0x224 0x484 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DTE_RX                         0x224 0x484 0x5E8 0x0 0x5
+#define MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI                          0x224 0x484 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23                           0x224 0x484 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_TXD__TPSMP_HDATA25                        0x224 0x484 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                         0x228 0x488 0x5F0 0x0 0x6
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DTE_TX                         0x228 0x488 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO                          0x228 0x488 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPT1_COMPARE3                        0x228 0x488 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24                           0x228 0x488 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_RXD__TPSMP_HDATA26                        0x228 0x488 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                         0x22C 0x48C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DTE_RX                         0x22C 0x48C 0x5F0 0x0 0x7
+#define MX8MP_IOMUXC_UART2_TXD__ECSPI3_SS0                           0x22C 0x48C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPT1_COMPARE2                        0x22C 0x48C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25                           0x22C 0x48C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_TXD__TPSMP_HDATA27                        0x22C 0x48C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX                         0x230 0x490 0x5F8 0x0 0x6
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DTE_TX                         0x230 0x490 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS                        0x230 0x490 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS                        0x230 0x490 0x5E4 0x1 0x4
+#define MX8MP_IOMUXC_UART3_RXD__USDHC3_RESET_B                       0x230 0x490 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPT1_CAPTURE2                        0x230 0x490 0x598 0x3 0x1
+#define MX8MP_IOMUXC_UART3_RXD__CAN2_TX                              0x230 0x490 0x000 0x4 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26                           0x230 0x490 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_RXD__TPSMP_HDATA28                        0x230 0x490 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX                         0x234 0x494 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DTE_RX                         0x234 0x494 0x5F8 0x0 0x7
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS                        0x234 0x494 0x5E4 0x1 0x5
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DTE_CTS                        0x234 0x494 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_TXD__USDHC3_VSELECT                       0x234 0x494 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_TXD__GPT1_CLK                             0x234 0x494 0x59C 0x3 0x1
+#define MX8MP_IOMUXC_UART3_TXD__CAN2_RX                              0x234 0x494 0x550 0x4 0x2
+#define MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27                           0x234 0x494 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_TXD__TPSMP_HDATA29                        0x234 0x494 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX                         0x238 0x498 0x600 0x0 0x8
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DTE_TX                         0x238 0x498 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS                        0x238 0x498 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DTE_RTS                        0x238 0x498 0x5EC 0x1 0x4
+#define MX8MP_IOMUXC_UART4_RXD__HSIOMIX_PCIE_CLKREQ_B                0x238 0x498 0x5A0 0x2 0x1
+#define MX8MP_IOMUXC_UART4_RXD__GPT1_COMPARE1                        0x238 0x498 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART4_RXD__I2C6_SCL                             0x238 0x498 0x5CC 0x4 0x2
+#define MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28                           0x238 0x498 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_RXD__TPSMP_HDATA30                        0x238 0x498 0x000 0x7 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX                         0x23C 0x49C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DTE_RX                         0x23C 0x49C 0x600 0x0 0x9
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS                        0x23C 0x49C 0x5EC 0x1 0x5
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DTE_CTS                        0x23C 0x49C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_TXD__GPT1_CAPTURE1                        0x23C 0x49C 0x594 0x3 0x1
+#define MX8MP_IOMUXC_UART4_TXD__I2C6_SDA                             0x23C 0x49C 0x5D0 0x4 0x2
+#define MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29                           0x23C 0x49C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_TXD__TPSMP_HDATA31                        0x23C 0x49C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_EARC_SCL                  0x240 0x4A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL                          0x240 0x4A0 0x5C4 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__CAN1_TX                           0x240 0x4A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26                        0x240 0x4A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__AUDIOMIX_test_out00               0x240 0x4A0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_EARC_SDA                  0x244 0x4A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA                          0x244 0x4A4 0x5C8 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__CAN1_RX                           0x244 0x4A4 0x54C 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27                        0x244 0x4A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__AUDIOMIX_test_out01               0x244 0x4A4 0x000 0x6 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_EARC_CEC                      0x248 0x4A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL                              0x248 0x4A8 0x5CC 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_CEC__CAN2_TX                               0x248 0x4A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28                            0x248 0x4A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_EARC_DC_HPD                   0x24C 0x4AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_EARC_HDMI_HPD_O              0x24C 0x4AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__I2C6_SDA                              0x24C 0x4AC 0x5D0 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__CAN2_RX                               0x24C 0x4AC 0x550 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__GPIO3_IO29                            0x24C 0x4AC 0x000 0x5 0x0
+
+#endif /* __DTS_IMX8MP_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
new file mode 100644
index 0000000..9b1616e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -0,0 +1,654 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx8mp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x301f0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 35 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 0 144 4>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 82 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 114 30>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mp-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx8mp-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "fsl,imx8mp-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
+				/* For nvmem subnodes */
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop",
+					     "syscon";
+				reg = <0x30360000 0x10000>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap =<&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mp-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MP_CLK_NOC>,
+						  <&clk IMX8MP_CLK_NOC_IO>,
+						  <&clk IMX8MP_CLK_GIC>,
+						  <&clk IMX8MP_CLK_AUDIO_AHB>,
+						  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
+						  <&clk IMX8MP_CLK_IPG_AUDIO_ROOT>,
+						  <&clk IMX8MP_AUDIO_PLL1>,
+						  <&clk IMX8MP_AUDIO_PLL2>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL2_500M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>;
+				assigned-clock-rates = <1000000000>,
+						       <800000000>,
+						       <500000000>,
+						       <400000000>,
+						       <800000000>,
+						       <400000000>,
+						       <393216000>,
+						       <361267200>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mp-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				#reset-cells = <1>;
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x305f0000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM1_ROOT>,
+					 <&clk IMX8MP_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM2_ROOT>,
+					 <&clk IMX8MP_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM3_ROOT>,
+					 <&clk IMX8MP_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM4_ROOT>,
+					 <&clk IMX8MP_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x309f0000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ecspi1: spi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
+					 <&clk IMX8MP_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
+					 <&clk IMX8MP_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
+					 <&clk IMX8MP_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_AHB>,
+					 <&clk IMX8MP_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART4_ROOT>,
+					 <&clk IMX8MP_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			i2c5: i2c@30ad0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ad0000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C5_ROOT>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@30ae0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ae0000 0x10000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C6_ROOT>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MP_CLK_SDMA1_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec: ethernet@30be0000 {
+				compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ENET1_ROOT>,
+					 <&clk IMX8MP_CLK_SIM_ENET_ROOT>,
+					 <&clk IMX8MP_CLK_ENET_TIMER>,
+					 <&clk IMX8MP_CLK_ENET_REF>,
+					 <&clk IMX8MP_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+						  <&clk IMX8MP_CLK_ENET_TIMER>,
+						  <&clk IMX8MP_CLK_ENET_REF>,
+						  <&clk IMX8MP_CLK_ENET_TIMER>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+							 <&clk IMX8MP_SYS_PLL2_100M>,
+							 <&clk IMX8MP_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,
+			      <0x38880000 0xc0000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 94066d4..c9241ab 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -137,6 +137,8 @@ &fec1 {
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
+	phy-reset-gpios = <&gpio1 9  GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
 	fsl,magic-packet;
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 764a4cb..10eca941 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -55,6 +55,15 @@ hp-det {
 			wakeup-source;
 			linux,code = <KEY_HP>;
 		};
+
+		wwan-wake {
+			label = "WWAN_WAKE";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_PHONE>;
+		};
 	};
 
 	leds {
@@ -148,6 +157,55 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		regulator-always-on;
 	};
 
+	wwan_codec: sound-wwan-codec {
+		compatible = "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	sound-wwan {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SIMCom SIM7100";
+		simple-audio-card,format = "dsp_a";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+
+		telephony_link_master: simple-audio-card,codec {
+			sound-dai = <&wwan_codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		pinctrl-names = "default";
@@ -169,6 +227,22 @@ wifi_pwr_en: regulator-wifi-en {
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
 &clk {
 	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
 	assigned-clock-rates = <786432000>, <722534400>;
@@ -354,10 +428,10 @@ connector {
 				PDO_FIXED_USB_COMM |
 				PDO_FIXED_DUAL_ROLE |
 				PDO_FIXED_DATA_SWAP )>;
-			sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM |
+			sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM |
 				PDO_FIXED_DUAL_ROLE |
 				PDO_FIXED_DATA_SWAP )
-			     PDO_VAR(5000, 3000, 3000)>;
+			     PDO_VAR(5000, 5000, 3500)>;
 			op-sink-microwatt = <10000000>;
 
 			ports {
@@ -426,6 +500,19 @@ magnetometer@1e	{
 		vddio-supply = <&reg_3v3_p>;
 	};
 
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+		assigned-clock-rates = <24576000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDD-supply = <&reg_1v8_p>;
+		VDDIO-supply = <&reg_3v3_p>;
+		VDDA-supply = <&reg_3v3_p>;
+	};
+
 	touchscreen@5d {
 		compatible = "goodix,gt5688";
 		reg = <0x5d>;
@@ -441,11 +528,20 @@ touchscreen@5d {
 		VDDIO-supply = <&reg_1v8_p>;
 	};
 
+	proximity-sensor@60 {
+		compatible = "vishay,vcnl4040";
+		reg = <0x60>;
+		pinctrl-0 = <&pinctrl_prox>;
+	};
+
 	accel-gyro@6a {
 		compatible = "st,lsm9ds1-imu";
 		reg = <0x6a>;
 		vdd-supply = <&reg_3v3_p>;
 		vddio-supply = <&reg_3v3_p>;
+		mount-matrix =  "1",  "0",  "0",
+				"0",  "1",  "0",
+				"0",  "0", "-1";
 	};
 };
 
@@ -508,6 +604,7 @@ pinctrl_gpio_keys: gpiokeygrp {
 			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x16
 			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22	0x16
 			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0x180  /* HP_DET */
+			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8	0x80   /* nWoWWAN */
 		>;
 	};
 
@@ -543,6 +640,12 @@ MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x80  /* PMIC intr */
 		>;
 	};
 
+	pinctrl_prox: proxgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x80  /* prox intr */
+		>;
+	};
+
 	pinctrl_pwr_en: pwrengrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x06
@@ -555,6 +658,25 @@ MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29	0x80  /* RTC intr */
 		>;
 	};
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
+			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
+		>;
+	};
+
 	pinctrl_typec: typecgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x16
@@ -730,6 +852,25 @@ &snvs_pwrkey {
 	status = "okay";
 };
 
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai6>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
 &uart1 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -750,6 +891,7 @@ &uart4 { /* BT */
 };
 
 &usb3_phy0 {
+	vbus-supply = <&reg_5v_p>;
 	status = "okay";
 };
 
@@ -808,7 +950,7 @@ &usdhc2 {
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	power-supply = <&wifi_pwr_en>;
-	non-removable;
+	broken-cd;
 	disable-wp;
 	cap-sdio-irq;
 	keep-power-in-suspend;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index 3f2a489..77ab568 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -35,6 +35,16 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		status = "okay";
+	};
 };
 
 &A53_0 {
@@ -53,6 +63,53 @@ &A53_3 {
 	cpu-supply = <&buck2>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_alert0: trip0 {
+			temperature = <75000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_alert1: trip1 {
+			temperature = <80000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_crit0: trip3 {
+			temperature = <90000>;
+			hysteresis = <2000>;
+			type = "critical";
+		};
+
+		fan_toggle0: trip4 {
+			temperature = <65000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+			<&A53_0 0 1>; /* Exclude highest OPP */
+		};
+
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
+			<&A53_0 0 2>; /* Exclude two highest OPPs */
+		};
+
+		map4 {
+			trip = <&fan_toggle0>;
+			cooling-device = <&fan 0 1>;
+		};
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -201,6 +258,27 @@ ldo7: LDO7 {
 	};
 };
 
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <10>;
+	phy-reset-post-delay = <50>;
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -254,6 +332,32 @@ &wdog1 {
 };
 
 &iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x16
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 6a1e839..75b3842 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -198,7 +198,7 @@ psci {
 	};
 
 	thermal-zones {
-		cpu-thermal {
+		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
 			thermal-sensors = <&tmu 0>;
@@ -290,7 +290,8 @@ soc@0 {
 		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
 
 		bus@30000000 { /* AIPS1 */
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x301f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -521,7 +522,7 @@ lcdif: lcd-controller@30320000 {
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@30330000 {
+			iomuxc: pinctrl@30330000 {
 				compatible = "fsl,imx8mq-iomuxc";
 				reg = <0x30330000 0x10000>;
 			};
@@ -574,6 +575,8 @@ snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
@@ -692,7 +695,8 @@ pgc_pcie2: power-domain@a {
 		};
 
 		bus@30400000 { /* AIPS2 */
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x305f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -751,7 +755,8 @@ system_counter: timer@306a0000 {
 		};
 
 		bus@30800000 { /* AIPS3 */
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x309f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -1023,7 +1028,8 @@ fec1: ethernet@30be0000 {
 		};
 
 		bus@32c00000 { /* AIPS4 */
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32df0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index fb5f752..e8ffb75 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -189,6 +190,11 @@ watchdog {
 			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
 			timeout-sec = <60>;
 		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
 	};
 
 	timer {
@@ -586,4 +592,37 @@ lsio_lpcg: clock-controller@5d400000 {
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi
index e746b9c..ba0b530 100644
--- a/arch/arm64/boot/dts/freescale/s32v234.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi
@@ -104,7 +104,7 @@ soc {
 		interrupt-parent = <&gic>;
 		ranges;
 
-		aips0: aips-bus@40000000 {
+		aips0: bus@40000000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -120,7 +120,7 @@ uart0: serial@40053000 {
 			};
 		};
 
-		aips1: aips-bus@40080000 {
+		aips1: bus@40080000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index e794a12..51d9483 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -121,12 +121,12 @@ partitions {
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x034B0000>;
+				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@34B0000 {
+			qspi_rootfs: partition@3FE0000 {
 				label = "Root Filesystem - JFFS2";
-				reg = <0x034B0000 0x0EB50000>;
+				reg = <0x03FE0000 0x0C020000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index f1b5127..3e5f2e7 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -2,6 +2,9 @@
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
index bd9ed9d..ec72a11 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
@@ -11,6 +11,8 @@
  * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
  */
 
+/dts-v1/;
+
 #include "armada-3720-espressobin.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
index 6e876a6..03733fd 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -11,6 +11,8 @@
  * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200
  */
 
+/dts-v1/;
+
 #include "armada-3720-espressobin.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
index 0f8405d..8570c5f 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -11,6 +11,8 @@
  * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200
  */
 
+/dts-v1/;
+
 #include "armada-3720-espressobin.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 53b8ac5..42e992f 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -7,12 +7,16 @@
  *
  */
 
-/dts-v1/;
-
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-372x.dtsi"
 
 / {
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index a211a04..b90d78a 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -367,6 +367,7 @@ ge_phy: ethernet-phy@0 {
 		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
 		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
 	};
 
 	switch0: switch0@4 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 572e261..cbcb210 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -71,6 +71,7 @@ sfp_eth0: sfp-eth0 {
 		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp0_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 
 	sfp_eth1: sfp-eth1 {
@@ -83,6 +84,7 @@ sfp_eth1: sfp-eth1 {
 		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 
 	sfp_eth3: sfp-eth3 {
@@ -95,6 +97,7 @@ sfp_eth3: sfp-eth3 {
 		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 0984955..fcab517 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -53,4 +53,9 @@ l2: l2-cache {
 			cache-sets = <512>;
 		};
 	};
+
+	thermal-zones {
+		/delete-node/ ap-thermal-cpu2;
+		/delete-node/ ap-thermal-cpu3;
+	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
index 840466e..68782f1 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -17,7 +17,7 @@ cpus {
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -32,7 +32,7 @@ cpu0: cpu@0 {
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -47,7 +47,7 @@ cpu1: cpu@1 {
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -62,7 +62,7 @@ cpu2: cpu@100 {
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 458bbc4..2f8967c 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,3 +8,4 @@
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 43307ba..2cd8b33 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -278,7 +278,7 @@ pio: pinctrl@10005000 {
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt2712-scpsys", "syscon";
 		#power-domain-cells = <1>;
 		reg = <0 0x10006000 0 0x1000>;
@@ -303,6 +303,12 @@ uart5: serial@1000f000 {
 		status = "disabled";
 	};
 
+	rtc: rtc@10011000 {
+		compatible = "mediatek,mt2712-rtc";
+		reg = <0 0x10011000 0 0x1000>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+	};
+
 	spis1: spi@10013000 {
 		compatible = "mediatek,mt2712-spi-slave";
 		reg = <0 0x10013000 0 0x100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 2b2a69c..136ef95 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -157,7 +157,7 @@ pins1 {
 		};
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt6797-scpsys";
 		#power-domain-cells = <1>;
 		reg = <0 0x10006000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index dac51e9..339dc9f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -230,7 +230,7 @@ pericfg: pericfg@10002000 {
 		#reset-cells = <1>;
 	};
 
-	scpsys: scpsys@10006000 {
+	scpsys: power-controller@10006000 {
 		compatible = "mediatek,mt7622-scpsys",
 			     "syscon";
 		#power-domain-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 8b4e806..ccb8e88 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -331,6 +331,7 @@ timer {
 			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
 			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,no-tick-in-suspend;
 	};
 
 	soc {
@@ -436,7 +437,7 @@ pins1 {
 			};
 		};
 
-		scpsys: scpsys@10006000 {
+		scpsys: power-controller@10006000 {
 			compatible = "mediatek,mt8173-scpsys";
 			#power-domain-cells = <1>;
 			reg = <0 0x10006000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 124f9d3..97863ad 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -74,6 +74,9 @@ cpu0: cpu@0 {
 			reg = <0x000>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <84>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -82,6 +85,9 @@ cpu1: cpu@1 {
 			reg = <0x001>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <84>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -90,6 +96,9 @@ cpu2: cpu@2 {
 			reg = <0x002>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <84>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -98,6 +107,9 @@ cpu3: cpu@3 {
 			reg = <0x003>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <84>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@100 {
@@ -106,6 +118,9 @@ cpu4: cpu@100 {
 			reg = <0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <211>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@101 {
@@ -114,6 +129,9 @@ cpu5: cpu@101 {
 			reg = <0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <211>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@102 {
@@ -122,6 +140,9 @@ cpu6: cpu@102 {
 			reg = <0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <211>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@103 {
@@ -130,6 +151,31 @@ cpu7: cpu@103 {
 			reg = <0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <211>;
+			#cooling-cells = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x00010001>;
+				entry-latency-us = <200>;
+				exit-latency-us = <200>;
+				min-residency-us = <800>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <250>;
+				exit-latency-us = <400>;
+				min-residency-us = <1300>;
+			};
 		};
 	};
 
@@ -255,6 +301,13 @@ pio: pinctrl@10005000 {
 			#interrupt-cells = <2>;
 		};
 
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8183-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
 		apmixedsys: syscon@1000c000 {
 			compatible = "mediatek,mt8183-apmixedsys", "syscon";
 			reg = <0 0x1000c000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h
new file mode 100644
index 0000000..73339bb
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h
@@ -0,0 +1,663 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ */
+#ifndef __DTS_MT8516_PINFUNC_H
+#define __DTS_MT8516_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8516_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8516_PIN_0_EINT0__FUNC_PWM_B (MTK_PIN_NO(0) | 1)
+#define MT8516_PIN_0_EINT0__FUNC_I2S2_BCK (MTK_PIN_NO(0) | 3)
+#define MT8516_PIN_0_EINT0__FUNC_EXT_TXD0 (MTK_PIN_NO(0) | 4)
+#define MT8516_PIN_0_EINT0__FUNC_SQICS (MTK_PIN_NO(0) | 6)
+#define MT8516_PIN_0_EINT0__FUNC_DBG_MON_A_6 (MTK_PIN_NO(0) | 7)
+
+#define MT8516_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8516_PIN_1_EINT1__FUNC_PWM_C (MTK_PIN_NO(1) | 1)
+#define MT8516_PIN_1_EINT1__FUNC_I2S2_DI (MTK_PIN_NO(1) | 3)
+#define MT8516_PIN_1_EINT1__FUNC_EXT_TXD1 (MTK_PIN_NO(1) | 4)
+#define MT8516_PIN_1_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(1) | 5)
+#define MT8516_PIN_1_EINT1__FUNC_SQISO (MTK_PIN_NO(1) | 6)
+#define MT8516_PIN_1_EINT1__FUNC_DBG_MON_A_7 (MTK_PIN_NO(1) | 7)
+
+#define MT8516_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8516_PIN_2_EINT2__FUNC_CLKM0 (MTK_PIN_NO(2) | 1)
+#define MT8516_PIN_2_EINT2__FUNC_I2S2_LRCK (MTK_PIN_NO(2) | 3)
+#define MT8516_PIN_2_EINT2__FUNC_EXT_TXD2 (MTK_PIN_NO(2) | 4)
+#define MT8516_PIN_2_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(2) | 5)
+#define MT8516_PIN_2_EINT2__FUNC_SQISI (MTK_PIN_NO(2) | 6)
+#define MT8516_PIN_2_EINT2__FUNC_DBG_MON_A_8 (MTK_PIN_NO(2) | 7)
+
+#define MT8516_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8516_PIN_3_EINT3__FUNC_CLKM1 (MTK_PIN_NO(3) | 1)
+#define MT8516_PIN_3_EINT3__FUNC_SPI_MI (MTK_PIN_NO(3) | 3)
+#define MT8516_PIN_3_EINT3__FUNC_EXT_TXD3 (MTK_PIN_NO(3) | 4)
+#define MT8516_PIN_3_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(3) | 5)
+#define MT8516_PIN_3_EINT3__FUNC_SQIWP (MTK_PIN_NO(3) | 6)
+#define MT8516_PIN_3_EINT3__FUNC_DBG_MON_A_9 (MTK_PIN_NO(3) | 7)
+
+#define MT8516_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8516_PIN_4_EINT4__FUNC_CLKM2 (MTK_PIN_NO(4) | 1)
+#define MT8516_PIN_4_EINT4__FUNC_SPI_MO (MTK_PIN_NO(4) | 3)
+#define MT8516_PIN_4_EINT4__FUNC_EXT_TXC (MTK_PIN_NO(4) | 4)
+#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_TCK (MTK_PIN_NO(4) | 5)
+#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(4) | 6)
+#define MT8516_PIN_4_EINT4__FUNC_DBG_MON_A_10 (MTK_PIN_NO(4) | 7)
+
+#define MT8516_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8516_PIN_5_EINT5__FUNC_UCTS2 (MTK_PIN_NO(5) | 1)
+#define MT8516_PIN_5_EINT5__FUNC_SPI_CSB (MTK_PIN_NO(5) | 3)
+#define MT8516_PIN_5_EINT5__FUNC_EXT_RXER (MTK_PIN_NO(5) | 4)
+#define MT8516_PIN_5_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(5) | 5)
+#define MT8516_PIN_5_EINT5__FUNC_CONN_TEST_CK (MTK_PIN_NO(5) | 6)
+#define MT8516_PIN_5_EINT5__FUNC_DBG_MON_A_11 (MTK_PIN_NO(5) | 7)
+
+#define MT8516_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8516_PIN_6_EINT6__FUNC_URTS2 (MTK_PIN_NO(6) | 1)
+#define MT8516_PIN_6_EINT6__FUNC_SPI_CLK (MTK_PIN_NO(6) | 3)
+#define MT8516_PIN_6_EINT6__FUNC_EXT_RXC (MTK_PIN_NO(6) | 4)
+#define MT8516_PIN_6_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(6) | 5)
+#define MT8516_PIN_6_EINT6__FUNC_DBG_MON_A_12 (MTK_PIN_NO(6) | 7)
+
+#define MT8516_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8516_PIN_7_EINT7__FUNC_SQIRST (MTK_PIN_NO(7) | 1)
+#define MT8516_PIN_7_EINT7__FUNC_SDA1_0 (MTK_PIN_NO(7) | 3)
+#define MT8516_PIN_7_EINT7__FUNC_EXT_RXDV (MTK_PIN_NO(7) | 4)
+#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(7) | 5)
+#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(7) | 6)
+#define MT8516_PIN_7_EINT7__FUNC_DBG_MON_A_13 (MTK_PIN_NO(7) | 7)
+
+#define MT8516_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8516_PIN_8_EINT8__FUNC_SQICK (MTK_PIN_NO(8) | 1)
+#define MT8516_PIN_8_EINT8__FUNC_CLKM3 (MTK_PIN_NO(8) | 2)
+#define MT8516_PIN_8_EINT8__FUNC_SCL1_0 (MTK_PIN_NO(8) | 3)
+#define MT8516_PIN_8_EINT8__FUNC_EXT_RXD0 (MTK_PIN_NO(8) | 4)
+#define MT8516_PIN_8_EINT8__FUNC_ANT_SEL0 (MTK_PIN_NO(8) | 5)
+#define MT8516_PIN_8_EINT8__FUNC_DBG_MON_A_14 (MTK_PIN_NO(8) | 7)
+
+#define MT8516_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8516_PIN_9_EINT9__FUNC_CLKM4 (MTK_PIN_NO(9) | 1)
+#define MT8516_PIN_9_EINT9__FUNC_SDA2_0 (MTK_PIN_NO(9) | 2)
+#define MT8516_PIN_9_EINT9__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT8516_PIN_9_EINT9__FUNC_EXT_RXD1 (MTK_PIN_NO(9) | 4)
+#define MT8516_PIN_9_EINT9__FUNC_ANT_SEL1 (MTK_PIN_NO(9) | 5)
+#define MT8516_PIN_9_EINT9__FUNC_DBG_MON_A_15 (MTK_PIN_NO(9) | 7)
+
+#define MT8516_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8516_PIN_10_EINT10__FUNC_CLKM5 (MTK_PIN_NO(10) | 1)
+#define MT8516_PIN_10_EINT10__FUNC_SCL2_0 (MTK_PIN_NO(10) | 2)
+#define MT8516_PIN_10_EINT10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 3)
+#define MT8516_PIN_10_EINT10__FUNC_EXT_RXD2 (MTK_PIN_NO(10) | 4)
+#define MT8516_PIN_10_EINT10__FUNC_ANT_SEL2 (MTK_PIN_NO(10) | 5)
+#define MT8516_PIN_10_EINT10__FUNC_DBG_MON_A_16 (MTK_PIN_NO(10) | 7)
+
+#define MT8516_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8516_PIN_11_EINT11__FUNC_CLKM4 (MTK_PIN_NO(11) | 1)
+#define MT8516_PIN_11_EINT11__FUNC_PWM_C (MTK_PIN_NO(11) | 2)
+#define MT8516_PIN_11_EINT11__FUNC_CONN_TEST_CK (MTK_PIN_NO(11) | 3)
+#define MT8516_PIN_11_EINT11__FUNC_ANT_SEL3 (MTK_PIN_NO(11) | 4)
+#define MT8516_PIN_11_EINT11__FUNC_EXT_RXD3 (MTK_PIN_NO(11) | 6)
+#define MT8516_PIN_11_EINT11__FUNC_DBG_MON_A_17 (MTK_PIN_NO(11) | 7)
+
+#define MT8516_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8516_PIN_12_EINT12__FUNC_CLKM5 (MTK_PIN_NO(12) | 1)
+#define MT8516_PIN_12_EINT12__FUNC_PWM_A (MTK_PIN_NO(12) | 2)
+#define MT8516_PIN_12_EINT12__FUNC_SPDIF_OUT (MTK_PIN_NO(12) | 3)
+#define MT8516_PIN_12_EINT12__FUNC_ANT_SEL4 (MTK_PIN_NO(12) | 4)
+#define MT8516_PIN_12_EINT12__FUNC_EXT_TXEN (MTK_PIN_NO(12) | 6)
+#define MT8516_PIN_12_EINT12__FUNC_DBG_MON_A_18 (MTK_PIN_NO(12) | 7)
+
+#define MT8516_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8516_PIN_13_EINT13__FUNC_TSF_IN (MTK_PIN_NO(13) | 3)
+#define MT8516_PIN_13_EINT13__FUNC_ANT_SEL5 (MTK_PIN_NO(13) | 4)
+#define MT8516_PIN_13_EINT13__FUNC_SPDIF_IN (MTK_PIN_NO(13) | 6)
+#define MT8516_PIN_13_EINT13__FUNC_DBG_MON_A_19 (MTK_PIN_NO(13) | 7)
+
+#define MT8516_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8516_PIN_14_EINT14__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(14) | 2)
+#define MT8516_PIN_14_EINT14__FUNC_TDM_RX_MCK (MTK_PIN_NO(14) | 3)
+#define MT8516_PIN_14_EINT14__FUNC_ANT_SEL1 (MTK_PIN_NO(14) | 4)
+#define MT8516_PIN_14_EINT14__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(14) | 5)
+#define MT8516_PIN_14_EINT14__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8516_PIN_14_EINT14__FUNC_DBG_MON_B_8 (MTK_PIN_NO(14) | 7)
+
+#define MT8516_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8516_PIN_15_EINT15__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(15) | 2)
+#define MT8516_PIN_15_EINT15__FUNC_TDM_RX_BCK (MTK_PIN_NO(15) | 3)
+#define MT8516_PIN_15_EINT15__FUNC_ANT_SEL2 (MTK_PIN_NO(15) | 4)
+#define MT8516_PIN_15_EINT15__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(15) | 5)
+#define MT8516_PIN_15_EINT15__FUNC_NCEB1 (MTK_PIN_NO(15) | 6)
+#define MT8516_PIN_15_EINT15__FUNC_DBG_MON_B_9 (MTK_PIN_NO(15) | 7)
+
+#define MT8516_PIN_16_EINT16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8516_PIN_16_EINT16__FUNC_I2S_8CH_BCK (MTK_PIN_NO(16) | 2)
+#define MT8516_PIN_16_EINT16__FUNC_TDM_RX_LRCK (MTK_PIN_NO(16) | 3)
+#define MT8516_PIN_16_EINT16__FUNC_ANT_SEL3 (MTK_PIN_NO(16) | 4)
+#define MT8516_PIN_16_EINT16__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(16) | 5)
+#define MT8516_PIN_16_EINT16__FUNC_NCEB0 (MTK_PIN_NO(16) | 6)
+#define MT8516_PIN_16_EINT16__FUNC_DBG_MON_B_10 (MTK_PIN_NO(16) | 7)
+
+#define MT8516_PIN_17_EINT17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8516_PIN_17_EINT17__FUNC_I2S_8CH_MCK (MTK_PIN_NO(17) | 2)
+#define MT8516_PIN_17_EINT17__FUNC_TDM_RX_DI (MTK_PIN_NO(17) | 3)
+#define MT8516_PIN_17_EINT17__FUNC_IDDIG (MTK_PIN_NO(17) | 4)
+#define MT8516_PIN_17_EINT17__FUNC_ANT_SEL4 (MTK_PIN_NO(17) | 5)
+#define MT8516_PIN_17_EINT17__FUNC_NREB (MTK_PIN_NO(17) | 6)
+#define MT8516_PIN_17_EINT17__FUNC_DBG_MON_B_11 (MTK_PIN_NO(17) | 7)
+
+#define MT8516_PIN_18_EINT18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8516_PIN_18_EINT18__FUNC_USB_DRVVBUS (MTK_PIN_NO(18) | 2)
+#define MT8516_PIN_18_EINT18__FUNC_I2S3_LRCK (MTK_PIN_NO(18) | 3)
+#define MT8516_PIN_18_EINT18__FUNC_CLKM1 (MTK_PIN_NO(18) | 4)
+#define MT8516_PIN_18_EINT18__FUNC_ANT_SEL3 (MTK_PIN_NO(18) | 5)
+#define MT8516_PIN_18_EINT18__FUNC_I2S2_BCK (MTK_PIN_NO(18) | 6)
+#define MT8516_PIN_18_EINT18__FUNC_DBG_MON_A_20 (MTK_PIN_NO(18) | 7)
+
+#define MT8516_PIN_19_EINT19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8516_PIN_19_EINT19__FUNC_UCTS1 (MTK_PIN_NO(19) | 1)
+#define MT8516_PIN_19_EINT19__FUNC_IDDIG (MTK_PIN_NO(19) | 2)
+#define MT8516_PIN_19_EINT19__FUNC_I2S3_BCK (MTK_PIN_NO(19) | 3)
+#define MT8516_PIN_19_EINT19__FUNC_CLKM2 (MTK_PIN_NO(19) | 4)
+#define MT8516_PIN_19_EINT19__FUNC_ANT_SEL4 (MTK_PIN_NO(19) | 5)
+#define MT8516_PIN_19_EINT19__FUNC_I2S2_DI (MTK_PIN_NO(19) | 6)
+#define MT8516_PIN_19_EINT19__FUNC_DBG_MON_A_21 (MTK_PIN_NO(19) | 7)
+
+#define MT8516_PIN_20_EINT20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8516_PIN_20_EINT20__FUNC_URTS1 (MTK_PIN_NO(20) | 1)
+#define MT8516_PIN_20_EINT20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 3)
+#define MT8516_PIN_20_EINT20__FUNC_CLKM3 (MTK_PIN_NO(20) | 4)
+#define MT8516_PIN_20_EINT20__FUNC_ANT_SEL5 (MTK_PIN_NO(20) | 5)
+#define MT8516_PIN_20_EINT20__FUNC_I2S2_LRCK (MTK_PIN_NO(20) | 6)
+#define MT8516_PIN_20_EINT20__FUNC_DBG_MON_A_22 (MTK_PIN_NO(20) | 7)
+
+#define MT8516_PIN_21_EINT21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8516_PIN_21_EINT21__FUNC_NRNB (MTK_PIN_NO(21) | 1)
+#define MT8516_PIN_21_EINT21__FUNC_ANT_SEL0 (MTK_PIN_NO(21) | 2)
+#define MT8516_PIN_21_EINT21__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(21) | 3)
+#define MT8516_PIN_21_EINT21__FUNC_DBG_MON_B_31 (MTK_PIN_NO(21) | 7)
+
+#define MT8516_PIN_22_EINT22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8516_PIN_22_EINT22__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(22) | 2)
+#define MT8516_PIN_22_EINT22__FUNC_TSF_IN (MTK_PIN_NO(22) | 3)
+#define MT8516_PIN_22_EINT22__FUNC_USB_DRVVBUS (MTK_PIN_NO(22) | 4)
+#define MT8516_PIN_22_EINT22__FUNC_SPDIF_OUT (MTK_PIN_NO(22) | 5)
+#define MT8516_PIN_22_EINT22__FUNC_NRE_C (MTK_PIN_NO(22) | 6)
+#define MT8516_PIN_22_EINT22__FUNC_DBG_MON_B_12 (MTK_PIN_NO(22) | 7)
+
+#define MT8516_PIN_23_EINT23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8516_PIN_23_EINT23__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(23) | 2)
+#define MT8516_PIN_23_EINT23__FUNC_CLKM0 (MTK_PIN_NO(23) | 3)
+#define MT8516_PIN_23_EINT23__FUNC_IR (MTK_PIN_NO(23) | 4)
+#define MT8516_PIN_23_EINT23__FUNC_SPDIF_IN (MTK_PIN_NO(23) | 5)
+#define MT8516_PIN_23_EINT23__FUNC_NDQS_C (MTK_PIN_NO(23) | 6)
+#define MT8516_PIN_23_EINT23__FUNC_DBG_MON_B_13 (MTK_PIN_NO(23) | 7)
+
+#define MT8516_PIN_24_EINT24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8516_PIN_24_EINT24__FUNC_ANT_SEL1 (MTK_PIN_NO(24) | 3)
+#define MT8516_PIN_24_EINT24__FUNC_UCTS2 (MTK_PIN_NO(24) | 4)
+#define MT8516_PIN_24_EINT24__FUNC_PWM_A (MTK_PIN_NO(24) | 5)
+#define MT8516_PIN_24_EINT24__FUNC_I2S0_MCK (MTK_PIN_NO(24) | 6)
+#define MT8516_PIN_24_EINT24__FUNC_DBG_MON_A_0 (MTK_PIN_NO(24) | 7)
+
+#define MT8516_PIN_25_EINT25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8516_PIN_25_EINT25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 3)
+#define MT8516_PIN_25_EINT25__FUNC_URTS2 (MTK_PIN_NO(25) | 4)
+#define MT8516_PIN_25_EINT25__FUNC_PWM_B (MTK_PIN_NO(25) | 5)
+#define MT8516_PIN_25_EINT25__FUNC_I2S_8CH_MCK (MTK_PIN_NO(25) | 6)
+#define MT8516_PIN_25_EINT25__FUNC_DBG_MON_A_1 (MTK_PIN_NO(25) | 7)
+
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(26) | 1)
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(26) | 2)
+
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(27) | 1)
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(27) | 2)
+
+#define MT8516_PIN_28_PWRAP_INT__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S0_MCK (MTK_PIN_NO(28) | 1)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S_8CH_MCK (MTK_PIN_NO(28) | 4)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S2_MCK (MTK_PIN_NO(28) | 5)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S3_MCK (MTK_PIN_NO(28) | 6)
+
+#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(29) | 1)
+
+#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(30) | 1)
+
+#define MT8516_PIN_31_RTC32K_CK__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8516_PIN_31_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(31) | 1)
+
+#define MT8516_PIN_32_WATCHDOG__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8516_PIN_32_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(32) | 1)
+
+#define MT8516_PIN_33_SRCLKENA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8516_PIN_33_SRCLKENA__FUNC_SRCLKENA0 (MTK_PIN_NO(33) | 1)
+
+#define MT8516_PIN_34_URXD2__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8516_PIN_34_URXD2__FUNC_URXD2 (MTK_PIN_NO(34) | 1)
+#define MT8516_PIN_34_URXD2__FUNC_UTXD2 (MTK_PIN_NO(34) | 3)
+#define MT8516_PIN_34_URXD2__FUNC_DBG_SCL (MTK_PIN_NO(34) | 4)
+#define MT8516_PIN_34_URXD2__FUNC_I2S2_MCK (MTK_PIN_NO(34) | 6)
+#define MT8516_PIN_34_URXD2__FUNC_DBG_MON_B_0 (MTK_PIN_NO(34) | 7)
+
+#define MT8516_PIN_35_UTXD2__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8516_PIN_35_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(35) | 1)
+#define MT8516_PIN_35_UTXD2__FUNC_URXD2 (MTK_PIN_NO(35) | 3)
+#define MT8516_PIN_35_UTXD2__FUNC_DBG_SDA (MTK_PIN_NO(35) | 4)
+#define MT8516_PIN_35_UTXD2__FUNC_I2S3_MCK (MTK_PIN_NO(35) | 6)
+#define MT8516_PIN_35_UTXD2__FUNC_DBG_MON_B_1 (MTK_PIN_NO(35) | 7)
+
+#define MT8516_PIN_36_MRG_CLK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8516_PIN_36_MRG_CLK__FUNC_MRG_CLK (MTK_PIN_NO(36) | 1)
+#define MT8516_PIN_36_MRG_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(36) | 3)
+#define MT8516_PIN_36_MRG_CLK__FUNC_I2S3_BCK (MTK_PIN_NO(36) | 4)
+#define MT8516_PIN_36_MRG_CLK__FUNC_PCM0_CLK (MTK_PIN_NO(36) | 5)
+#define MT8516_PIN_36_MRG_CLK__FUNC_IR (MTK_PIN_NO(36) | 6)
+#define MT8516_PIN_36_MRG_CLK__FUNC_DBG_MON_A_2 (MTK_PIN_NO(36) | 7)
+
+#define MT8516_PIN_37_MRG_SYNC__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(37) | 1)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S0_LRCK (MTK_PIN_NO(37) | 3)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S3_LRCK (MTK_PIN_NO(37) | 4)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(37) | 5)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_EXT_COL (MTK_PIN_NO(37) | 6)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_DBG_MON_A_3 (MTK_PIN_NO(37) | 7)
+
+#define MT8516_PIN_38_MRG_DI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8516_PIN_38_MRG_DI__FUNC_MRG_DI (MTK_PIN_NO(38) | 1)
+#define MT8516_PIN_38_MRG_DI__FUNC_I2S0_DI (MTK_PIN_NO(38) | 3)
+#define MT8516_PIN_38_MRG_DI__FUNC_I2S3_DO (MTK_PIN_NO(38) | 4)
+#define MT8516_PIN_38_MRG_DI__FUNC_PCM0_DI (MTK_PIN_NO(38) | 5)
+#define MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO (MTK_PIN_NO(38) | 6)
+#define MT8516_PIN_38_MRG_DI__FUNC_DBG_MON_A_4 (MTK_PIN_NO(38) | 7)
+
+#define MT8516_PIN_39_MRG_DO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8516_PIN_39_MRG_DO__FUNC_MRG_DO (MTK_PIN_NO(39) | 1)
+#define MT8516_PIN_39_MRG_DO__FUNC_I2S0_MCK (MTK_PIN_NO(39) | 3)
+#define MT8516_PIN_39_MRG_DO__FUNC_I2S3_MCK (MTK_PIN_NO(39) | 4)
+#define MT8516_PIN_39_MRG_DO__FUNC_PCM0_DO (MTK_PIN_NO(39) | 5)
+#define MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC (MTK_PIN_NO(39) | 6)
+#define MT8516_PIN_39_MRG_DO__FUNC_DBG_MON_A_5 (MTK_PIN_NO(39) | 7)
+
+#define MT8516_PIN_40_KPROW0__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8516_PIN_40_KPROW0__FUNC_KPROW0 (MTK_PIN_NO(40) | 1)
+#define MT8516_PIN_40_KPROW0__FUNC_DBG_MON_B_4 (MTK_PIN_NO(40) | 7)
+
+#define MT8516_PIN_41_KPROW1__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8516_PIN_41_KPROW1__FUNC_KPROW1 (MTK_PIN_NO(41) | 1)
+#define MT8516_PIN_41_KPROW1__FUNC_IDDIG (MTK_PIN_NO(41) | 2)
+#define MT8516_PIN_41_KPROW1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 3)
+#define MT8516_PIN_41_KPROW1__FUNC_DBG_MON_B_5 (MTK_PIN_NO(41) | 7)
+
+#define MT8516_PIN_42_KPCOL0__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8516_PIN_42_KPCOL0__FUNC_KPCOL0 (MTK_PIN_NO(42) | 1)
+#define MT8516_PIN_42_KPCOL0__FUNC_DBG_MON_B_6 (MTK_PIN_NO(42) | 7)
+
+#define MT8516_PIN_43_KPCOL1__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8516_PIN_43_KPCOL1__FUNC_KPCOL1 (MTK_PIN_NO(43) | 1)
+#define MT8516_PIN_43_KPCOL1__FUNC_USB_DRVVBUS (MTK_PIN_NO(43) | 2)
+#define MT8516_PIN_43_KPCOL1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(43) | 3)
+#define MT8516_PIN_43_KPCOL1__FUNC_TSF_IN (MTK_PIN_NO(43) | 4)
+#define MT8516_PIN_43_KPCOL1__FUNC_DBG_MON_B_7 (MTK_PIN_NO(43) | 7)
+
+#define MT8516_PIN_44_JTMS__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8516_PIN_44_JTMS__FUNC_JTMS (MTK_PIN_NO(44) | 1)
+#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(44) | 2)
+#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(44) | 3)
+#define MT8516_PIN_44_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(44) | 5)
+#define MT8516_PIN_44_JTMS__FUNC_UDI_TMS_XI (MTK_PIN_NO(44) | 6)
+
+#define MT8516_PIN_45_JTCK__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8516_PIN_45_JTCK__FUNC_JTCK (MTK_PIN_NO(45) | 1)
+#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_TCK (MTK_PIN_NO(45) | 2)
+#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(45) | 3)
+
+#define MT8516_PIN_46_JTDI__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8516_PIN_46_JTDI__FUNC_JTDI (MTK_PIN_NO(46) | 1)
+#define MT8516_PIN_46_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(46) | 2)
+
+#define MT8516_PIN_47_JTDO__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8516_PIN_47_JTDO__FUNC_JTDO (MTK_PIN_NO(47) | 1)
+#define MT8516_PIN_47_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(47) | 2)
+
+#define MT8516_PIN_48_SPI_CS__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8516_PIN_48_SPI_CS__FUNC_SPI_CSB (MTK_PIN_NO(48) | 1)
+#define MT8516_PIN_48_SPI_CS__FUNC_I2S0_DI (MTK_PIN_NO(48) | 3)
+#define MT8516_PIN_48_SPI_CS__FUNC_I2S2_BCK (MTK_PIN_NO(48) | 4)
+#define MT8516_PIN_48_SPI_CS__FUNC_DBG_MON_A_23 (MTK_PIN_NO(48) | 7)
+
+#define MT8516_PIN_49_SPI_CK__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8516_PIN_49_SPI_CK__FUNC_SPI_CLK (MTK_PIN_NO(49) | 1)
+#define MT8516_PIN_49_SPI_CK__FUNC_I2S0_LRCK (MTK_PIN_NO(49) | 3)
+#define MT8516_PIN_49_SPI_CK__FUNC_I2S2_DI (MTK_PIN_NO(49) | 4)
+#define MT8516_PIN_49_SPI_CK__FUNC_DBG_MON_A_24 (MTK_PIN_NO(49) | 7)
+
+#define MT8516_PIN_50_SPI_MI__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MI (MTK_PIN_NO(50) | 1)
+#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MO (MTK_PIN_NO(50) | 2)
+#define MT8516_PIN_50_SPI_MI__FUNC_I2S0_BCK (MTK_PIN_NO(50) | 3)
+#define MT8516_PIN_50_SPI_MI__FUNC_I2S2_LRCK (MTK_PIN_NO(50) | 4)
+#define MT8516_PIN_50_SPI_MI__FUNC_DBG_MON_A_25 (MTK_PIN_NO(50) | 7)
+
+#define MT8516_PIN_51_SPI_MO__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MO (MTK_PIN_NO(51) | 1)
+#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MI (MTK_PIN_NO(51) | 2)
+#define MT8516_PIN_51_SPI_MO__FUNC_I2S0_MCK (MTK_PIN_NO(51) | 3)
+#define MT8516_PIN_51_SPI_MO__FUNC_I2S2_MCK (MTK_PIN_NO(51) | 4)
+#define MT8516_PIN_51_SPI_MO__FUNC_DBG_MON_A_26 (MTK_PIN_NO(51) | 7)
+
+#define MT8516_PIN_52_SDA1__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8516_PIN_52_SDA1__FUNC_SDA1_0 (MTK_PIN_NO(52) | 1)
+
+#define MT8516_PIN_53_SCL1__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8516_PIN_53_SCL1__FUNC_SCL1_0 (MTK_PIN_NO(53) | 1)
+
+#define MT8516_PIN_54_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8516_PIN_54_GPIO54__FUNC_PWM_B (MTK_PIN_NO(54) | 2)
+#define MT8516_PIN_54_GPIO54__FUNC_DBG_MON_B_2 (MTK_PIN_NO(54) | 7)
+
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S0_DI (MTK_PIN_NO(55) | 1)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_UCTS0 (MTK_PIN_NO(55) | 2)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S3_DO (MTK_PIN_NO(55) | 3)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(55) | 4)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_PWM_A (MTK_PIN_NO(55) | 5)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S2_BCK (MTK_PIN_NO(55) | 6)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_DBG_MON_A_28 (MTK_PIN_NO(55) | 7)
+
+#define MT8516_PIN_56_I2S_LRCK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(56) | 1)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S3_LRCK (MTK_PIN_NO(56) | 3)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(56) | 4)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_PWM_B (MTK_PIN_NO(56) | 5)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S2_DI (MTK_PIN_NO(56) | 6)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_DBG_MON_A_29 (MTK_PIN_NO(56) | 7)
+
+#define MT8516_PIN_57_I2S_BCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(57) | 1)
+#define MT8516_PIN_57_I2S_BCK__FUNC_URTS0 (MTK_PIN_NO(57) | 2)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S3_BCK (MTK_PIN_NO(57) | 3)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S_8CH_BCK (MTK_PIN_NO(57) | 4)
+#define MT8516_PIN_57_I2S_BCK__FUNC_PWM_C (MTK_PIN_NO(57) | 5)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S2_LRCK (MTK_PIN_NO(57) | 6)
+#define MT8516_PIN_57_I2S_BCK__FUNC_DBG_MON_A_30 (MTK_PIN_NO(57) | 7)
+
+#define MT8516_PIN_58_SDA0__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8516_PIN_58_SDA0__FUNC_SDA0_0 (MTK_PIN_NO(58) | 1)
+
+#define MT8516_PIN_59_SCL0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8516_PIN_59_SCL0__FUNC_SCL0_0 (MTK_PIN_NO(59) | 1)
+
+#define MT8516_PIN_60_SDA2__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8516_PIN_60_SDA2__FUNC_SDA2_0 (MTK_PIN_NO(60) | 1)
+#define MT8516_PIN_60_SDA2__FUNC_PWM_B (MTK_PIN_NO(60) | 2)
+
+#define MT8516_PIN_61_SCL2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8516_PIN_61_SCL2__FUNC_SCL2_0 (MTK_PIN_NO(61) | 1)
+#define MT8516_PIN_61_SCL2__FUNC_PWM_C (MTK_PIN_NO(61) | 2)
+
+#define MT8516_PIN_62_URXD0__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8516_PIN_62_URXD0__FUNC_URXD0 (MTK_PIN_NO(62) | 1)
+#define MT8516_PIN_62_URXD0__FUNC_UTXD0 (MTK_PIN_NO(62) | 2)
+
+#define MT8516_PIN_63_UTXD0__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8516_PIN_63_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(63) | 1)
+#define MT8516_PIN_63_UTXD0__FUNC_URXD0 (MTK_PIN_NO(63) | 2)
+
+#define MT8516_PIN_64_URXD1__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8516_PIN_64_URXD1__FUNC_URXD1 (MTK_PIN_NO(64) | 1)
+#define MT8516_PIN_64_URXD1__FUNC_UTXD1 (MTK_PIN_NO(64) | 2)
+#define MT8516_PIN_64_URXD1__FUNC_DBG_MON_A_27 (MTK_PIN_NO(64) | 7)
+
+#define MT8516_PIN_65_UTXD1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8516_PIN_65_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(65) | 1)
+#define MT8516_PIN_65_UTXD1__FUNC_URXD1 (MTK_PIN_NO(65) | 2)
+#define MT8516_PIN_65_UTXD1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(65) | 7)
+
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(68) | 1)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(68) | 2)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_SDA1_0 (MTK_PIN_NO(68) | 3)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_USB_SDA (MTK_PIN_NO(68) | 5)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S3_BCK (MTK_PIN_NO(68) | 6)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_DBG_MON_B_15 (MTK_PIN_NO(68) | 7)
+
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(69) | 1)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(69) | 2)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_SCL1_0 (MTK_PIN_NO(69) | 3)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_USB_SCL (MTK_PIN_NO(69) | 5)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S3_LRCK (MTK_PIN_NO(69) | 6)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_DBG_MON_B_16 (MTK_PIN_NO(69) | 7)
+
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(70) | 1)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(70) | 2)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_UTXD0 (MTK_PIN_NO(70) | 5)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S3_DO (MTK_PIN_NO(70) | 6)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(70) | 7)
+
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(71) | 1)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(71) | 2)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_A (MTK_PIN_NO(71) | 3)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S3_MCK (MTK_PIN_NO(71) | 4)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_URXD0 (MTK_PIN_NO(71) | 5)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_B (MTK_PIN_NO(71) | 6)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_DBG_MON_B_18 (MTK_PIN_NO(71) | 7)
+
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(72) | 1)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(72) | 2)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_SDA2_0 (MTK_PIN_NO(72) | 3)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_UTXD1 (MTK_PIN_NO(72) | 5)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_PWM_C (MTK_PIN_NO(72) | 6)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_DBG_MON_B_19 (MTK_PIN_NO(72) | 7)
+
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(73) | 1)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_I2S_8CH_BCK (MTK_PIN_NO(73) | 2)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_SCL2_0 (MTK_PIN_NO(73) | 3)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(73) | 4)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_URXD1 (MTK_PIN_NO(73) | 5)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_PWM_A (MTK_PIN_NO(73) | 6)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_DBG_MON_B_20 (MTK_PIN_NO(73) | 7)
+
+#define MT8516_PIN_74_TDN3__FUNC_GPI74 (MTK_PIN_NO(74) | 0)
+#define MT8516_PIN_74_TDN3__FUNC_TDN3 (MTK_PIN_NO(74) | 1)
+
+#define MT8516_PIN_75_TDP3__FUNC_GPI75 (MTK_PIN_NO(75) | 0)
+#define MT8516_PIN_75_TDP3__FUNC_TDP3 (MTK_PIN_NO(75) | 1)
+
+#define MT8516_PIN_76_TDN2__FUNC_GPI76 (MTK_PIN_NO(76) | 0)
+#define MT8516_PIN_76_TDN2__FUNC_TDN2 (MTK_PIN_NO(76) | 1)
+
+#define MT8516_PIN_77_TDP2__FUNC_GPI77 (MTK_PIN_NO(77) | 0)
+#define MT8516_PIN_77_TDP2__FUNC_TDP2 (MTK_PIN_NO(77) | 1)
+
+#define MT8516_PIN_78_TCN__FUNC_GPI78 (MTK_PIN_NO(78) | 0)
+#define MT8516_PIN_78_TCN__FUNC_TCN (MTK_PIN_NO(78) | 1)
+
+#define MT8516_PIN_79_TCP__FUNC_GPI79 (MTK_PIN_NO(79) | 0)
+#define MT8516_PIN_79_TCP__FUNC_TCP (MTK_PIN_NO(79) | 1)
+
+#define MT8516_PIN_80_TDN1__FUNC_GPI80 (MTK_PIN_NO(80) | 0)
+#define MT8516_PIN_80_TDN1__FUNC_TDN1 (MTK_PIN_NO(80) | 1)
+
+#define MT8516_PIN_81_TDP1__FUNC_GPI81 (MTK_PIN_NO(81) | 0)
+#define MT8516_PIN_81_TDP1__FUNC_TDP1 (MTK_PIN_NO(81) | 1)
+
+#define MT8516_PIN_82_TDN0__FUNC_GPI82 (MTK_PIN_NO(82) | 0)
+#define MT8516_PIN_82_TDN0__FUNC_TDN0 (MTK_PIN_NO(82) | 1)
+
+#define MT8516_PIN_83_TDP0__FUNC_GPI83 (MTK_PIN_NO(83) | 0)
+#define MT8516_PIN_83_TDP0__FUNC_TDP0 (MTK_PIN_NO(83) | 1)
+
+#define MT8516_PIN_84_RDN0__FUNC_GPI84 (MTK_PIN_NO(84) | 0)
+#define MT8516_PIN_84_RDN0__FUNC_RDN0 (MTK_PIN_NO(84) | 1)
+
+#define MT8516_PIN_85_RDP0__FUNC_GPI85 (MTK_PIN_NO(85) | 0)
+#define MT8516_PIN_85_RDP0__FUNC_RDP0 (MTK_PIN_NO(85) | 1)
+
+#define MT8516_PIN_86_RDN1__FUNC_GPI86 (MTK_PIN_NO(86) | 0)
+#define MT8516_PIN_86_RDN1__FUNC_RDN1 (MTK_PIN_NO(86) | 1)
+
+#define MT8516_PIN_87_RDP1__FUNC_GPI87 (MTK_PIN_NO(87) | 0)
+#define MT8516_PIN_87_RDP1__FUNC_RDP1 (MTK_PIN_NO(87) | 1)
+
+#define MT8516_PIN_88_RCN__FUNC_GPI88 (MTK_PIN_NO(88) | 0)
+#define MT8516_PIN_88_RCN__FUNC_RCN (MTK_PIN_NO(88) | 1)
+
+#define MT8516_PIN_89_RCP__FUNC_GPI89 (MTK_PIN_NO(89) | 0)
+#define MT8516_PIN_89_RCP__FUNC_RCP (MTK_PIN_NO(89) | 1)
+
+#define MT8516_PIN_90_RDN2__FUNC_GPI90 (MTK_PIN_NO(90) | 0)
+#define MT8516_PIN_90_RDN2__FUNC_RDN2 (MTK_PIN_NO(90) | 1)
+#define MT8516_PIN_90_RDN2__FUNC_CMDAT8 (MTK_PIN_NO(90) | 2)
+
+#define MT8516_PIN_91_RDP2__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT8516_PIN_91_RDP2__FUNC_RDP2 (MTK_PIN_NO(91) | 1)
+#define MT8516_PIN_91_RDP2__FUNC_CMDAT9 (MTK_PIN_NO(91) | 2)
+
+#define MT8516_PIN_92_RDN3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT8516_PIN_92_RDN3__FUNC_RDN3 (MTK_PIN_NO(92) | 1)
+#define MT8516_PIN_92_RDN3__FUNC_CMDAT4 (MTK_PIN_NO(92) | 2)
+
+#define MT8516_PIN_93_RDP3__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT8516_PIN_93_RDP3__FUNC_RDP3 (MTK_PIN_NO(93) | 1)
+#define MT8516_PIN_93_RDP3__FUNC_CMDAT5 (MTK_PIN_NO(93) | 2)
+
+#define MT8516_PIN_94_RCN_A__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT8516_PIN_94_RCN_A__FUNC_RCN_A (MTK_PIN_NO(94) | 1)
+#define MT8516_PIN_94_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(94) | 2)
+
+#define MT8516_PIN_95_RCP_A__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT8516_PIN_95_RCP_A__FUNC_RCP_A (MTK_PIN_NO(95) | 1)
+#define MT8516_PIN_95_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(95) | 2)
+
+#define MT8516_PIN_96_RDN1_A__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT8516_PIN_96_RDN1_A__FUNC_RDN1_A (MTK_PIN_NO(96) | 1)
+#define MT8516_PIN_96_RDN1_A__FUNC_CMDAT2 (MTK_PIN_NO(96) | 2)
+#define MT8516_PIN_96_RDN1_A__FUNC_CMCSD2 (MTK_PIN_NO(96) | 3)
+
+#define MT8516_PIN_97_RDP1_A__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT8516_PIN_97_RDP1_A__FUNC_RDP1_A (MTK_PIN_NO(97) | 1)
+#define MT8516_PIN_97_RDP1_A__FUNC_CMDAT3 (MTK_PIN_NO(97) | 2)
+#define MT8516_PIN_97_RDP1_A__FUNC_CMCSD3 (MTK_PIN_NO(97) | 3)
+
+#define MT8516_PIN_98_RDN0_A__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT8516_PIN_98_RDN0_A__FUNC_RDN0_A (MTK_PIN_NO(98) | 1)
+#define MT8516_PIN_98_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(98) | 2)
+
+#define MT8516_PIN_99_RDP0_A__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT8516_PIN_99_RDP0_A__FUNC_RDP0_A (MTK_PIN_NO(99) | 1)
+#define MT8516_PIN_99_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(99) | 2)
+
+#define MT8516_PIN_100_CMDAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8516_PIN_100_CMDAT0__FUNC_CMDAT0 (MTK_PIN_NO(100) | 1)
+#define MT8516_PIN_100_CMDAT0__FUNC_CMCSD0 (MTK_PIN_NO(100) | 2)
+#define MT8516_PIN_100_CMDAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(100) | 3)
+#define MT8516_PIN_100_CMDAT0__FUNC_TDM_RX_MCK (MTK_PIN_NO(100) | 5)
+#define MT8516_PIN_100_CMDAT0__FUNC_DBG_MON_B_21 (MTK_PIN_NO(100) | 7)
+
+#define MT8516_PIN_101_CMDAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMDAT1 (MTK_PIN_NO(101) | 1)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMCSD1 (MTK_PIN_NO(101) | 2)
+#define MT8516_PIN_101_CMDAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(101) | 3)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMFLASH (MTK_PIN_NO(101) | 4)
+#define MT8516_PIN_101_CMDAT1__FUNC_TDM_RX_BCK (MTK_PIN_NO(101) | 5)
+#define MT8516_PIN_101_CMDAT1__FUNC_DBG_MON_B_22 (MTK_PIN_NO(101) | 7)
+
+#define MT8516_PIN_102_CMMCLK__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8516_PIN_102_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(102) | 1)
+#define MT8516_PIN_102_CMMCLK__FUNC_ANT_SEL4 (MTK_PIN_NO(102) | 3)
+#define MT8516_PIN_102_CMMCLK__FUNC_TDM_RX_LRCK (MTK_PIN_NO(102) | 5)
+#define MT8516_PIN_102_CMMCLK__FUNC_DBG_MON_B_23 (MTK_PIN_NO(102) | 7)
+
+#define MT8516_PIN_103_CMPCLK__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8516_PIN_103_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(103) | 1)
+#define MT8516_PIN_103_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(103) | 2)
+#define MT8516_PIN_103_CMPCLK__FUNC_ANT_SEL5 (MTK_PIN_NO(103) | 3)
+#define MT8516_PIN_103_CMPCLK__FUNC_TDM_RX_DI (MTK_PIN_NO(103) | 5)
+#define MT8516_PIN_103_CMPCLK__FUNC_DBG_MON_B_24 (MTK_PIN_NO(103) | 7)
+
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(104) | 1)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_SQICS (MTK_PIN_NO(104) | 4)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_DBG_MON_B_25 (MTK_PIN_NO(104) | 7)
+
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(105) | 1)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_SQISO (MTK_PIN_NO(105) | 4)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_DBG_MON_B_26 (MTK_PIN_NO(105) | 7)
+
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(106) | 1)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_SQISI (MTK_PIN_NO(106) | 4)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_DBG_MON_B_27 (MTK_PIN_NO(106) | 7)
+
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(107) | 1)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_SQIWP (MTK_PIN_NO(107) | 4)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_DBG_MON_B_28 (MTK_PIN_NO(107) | 7)
+
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(108) | 1)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_SQIRST (MTK_PIN_NO(108) | 4)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_DBG_MON_B_29 (MTK_PIN_NO(108) | 7)
+
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(109) | 1)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_SQICK (MTK_PIN_NO(109) | 4)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_DBG_MON_B_30 (MTK_PIN_NO(109) | 7)
+
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(110) | 1)
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(110) | 4)
+
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(111) | 1)
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(111) | 4)
+
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(112) | 1)
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(112) | 4)
+
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(113) | 1)
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_NLD3 (MTK_PIN_NO(113) | 4)
+
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(114) | 1)
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_NLD0 (MTK_PIN_NO(114) | 4)
+
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(115) | 1)
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(115) | 4)
+
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(116) | 1)
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(116) | 4)
+
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(117) | 1)
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_NLD1 (MTK_PIN_NO(117) | 4)
+
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(118) | 1)
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_NLD5 (MTK_PIN_NO(118) | 4)
+
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(119) | 1)
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_NLD8 (MTK_PIN_NO(119) | 4)
+
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(120) | 1)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(120) | 4)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_NLD2 (MTK_PIN_NO(120) | 5)
+
+#endif				/* __DTS_MT8516_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
new file mode 100644
index 0000000..cce642c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "mt8516.dtsi"
+#include "pumpkin-common.dtsi"
+
+/ {
+	model = "Pumpkin MT8516";
+	compatible = "mediatek,mt8516";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
new file mode 100644
index 0000000..2f8adf0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/clock/mt8516-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "mt8516-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt8516";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1200000>;
+		};
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1250000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <600>;
+				exit-latency-us = <600>;
+				min-residency-us = <1200>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <800>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x2010000>;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clk26m: clk26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: clk32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x20000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8516-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt8516-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		apmixedsys: apmixedsys@10018000 {
+			compatible = "mediatek,mt8516-apmixedsys", "syscon";
+			reg = <0 0x10018000 0 0x710>;
+			#clock-cells = <1>;
+		};
+
+		toprgu: toprgu@10007000 {
+			compatible = "mediatek,mt8516-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8516-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_CLK26M_D2>,
+				 <&topckgen CLK_TOP_APXGPT>;
+			clock-names = "clk13m", "bus";
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8516-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			pins-are-numbered;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8516-pwrap";
+			reg = <0 0x1000f000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PMICWRAP_26M>,
+				 <&topckgen CLK_TOP_PMICWRAP_AP>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: interrupt-controller@10200620 {
+			compatible = "mediatek,mt8516-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		gic: interrupt-controller@10310000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10310000 0 0x1000>,
+			      <0 0x10320000 0 0x1000>,
+			      <0 0x10340000 0 0x2000>,
+			      <0 0x10360000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		uart0: serial@11005000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART0_SEL>,
+				 <&topckgen CLK_TOP_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11006000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11006000 0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART1_SEL>,
+				 <&topckgen CLK_TOP_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11007000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11007000 0 0x1000>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART2_SEL>,
+				 <&topckgen CLK_TOP_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11009000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x11009000 0 0x90>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
+				 <&infracfg CLK_IFR_I2C0_SEL>,
+				 <&topckgen CLK_TOP_I2C0>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main-source",
+				      "main-sel",
+				      "main",
+				      "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1100a000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100a000 0 0x90>,
+			      <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
+				 <&infracfg CLK_IFR_I2C1_SEL>,
+				 <&topckgen CLK_TOP_I2C1>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main-source",
+				      "main-sel",
+				      "main",
+				      "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1100b000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100b000 0 0x90>,
+			      <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
+				 <&infracfg CLK_IFR_I2C2_SEL>,
+				 <&topckgen CLK_TOP_I2C2>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main-source",
+				      "main-sel",
+				      "main",
+				      "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100c000 {
+			compatible = "mediatek,mt8516-spi",
+				     "mediatek,mt2712-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100c000 0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D12>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&topckgen CLK_TOP_SPI>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		mmc0: mmc@11120000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11120000 0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC0>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC0_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11130000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11130000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC1>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC1_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11170000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11170000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC2>,
+				 <&topckgen CLK_TOP_RG_MSDC2>,
+				 <&topckgen CLK_TOP_MSDC2_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		rng: rng@1020c000 {
+			compatible = "mediatek,mt8516-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020c000 0 0x100>;
+			clocks = <&topckgen CLK_TOP_TRNG>;
+			clock-names = "rng";
+		};
+
+		pwm: pwm@11008000 {
+			compatible = "mediatek,mt8516-pwm";
+			reg = <0 0x11008000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM>,
+				 <&topckgen CLK_TOP_PWM_B>,
+				 <&topckgen CLK_TOP_PWM1_FB>,
+				 <&topckgen CLK_TOP_PWM2_FB>,
+				 <&topckgen CLK_TOP_PWM3_FB>,
+				 <&topckgen CLK_TOP_PWM4_FB>,
+				 <&topckgen CLK_TOP_PWM5_FB>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5";
+		};
+
+		usb0: usb@11100000 {
+			compatible = "mediatek,mtk-musb";
+			reg = <0 0x11100000 0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "mc";
+			phys = <&usb0_port PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_USB>,
+				 <&topckgen CLK_TOP_USBIF>,
+				 <&topckgen CLK_TOP_USB_1P>;
+			clock-names = "main","mcu","univpll";
+			status = "disabled";
+		};
+
+		usb0_phy: usb@11110000 {
+			compatible = "mediatek,generic-tphy-v1";
+			reg = <0 0x11110000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb0_port: usb-phy@11110800 {
+				reg = <0 0x11110800 0 0x100>;
+				clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
new file mode 100644
index 0000000..a31093d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee: optee@4fd00000 {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		volume-up {
+			gpios = <&pio 42 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <115>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		volume-down {
+			gpios = <&pio 43 GPIO_ACTIVE_LOW>;
+			label = "volume_down";
+			linux,code = <114>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-div = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		rst-gpio = <&pio 65 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		eint20_mux_sel0 {
+			gpio-hog;
+			gpios = <0 0>;
+			input;
+			line-name = "eint20_mux_sel0";
+		};
+
+		expcon_mux_sel1 {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "expcon_mux_sel1";
+		};
+
+		mrg_di_mux_sel2 {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "mrg_di_mux_sel2";
+		};
+
+		sd_sdio_mux_sel3 {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "sd_sdio_mux_sel3";
+		};
+
+		sd_sdio_mux_ctrl7 {
+			gpio-hog;
+			gpios = <7 0>;
+			output-low;
+			line-name = "sd_sdio_mux_ctrl7";
+		};
+
+		hw_id0 {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "hw_id0";
+		};
+
+		hw_id1 {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "hw_id1";
+		};
+
+		hw_id2 {
+			gpio-hog;
+			gpios = <10 0>;
+			input;
+			line-name = "hw_id2";
+		};
+
+		fg_int_n {
+			gpio-hog;
+			gpios = <11 0>;
+			input;
+			line-name = "fg_int_n";
+		};
+
+		usba_pwr_en {
+			gpio-hog;
+			gpios = <12 0>;
+			output-high;
+			line-name = "usba_pwr_en";
+		};
+
+		wifi_3v3_pg {
+			gpio-hog;
+			gpios = <13 0>;
+			input;
+			line-name = "wifi_3v3_pg";
+		};
+
+		cam_rst {
+			gpio-hog;
+			gpios = <14 0>;
+			output-low;
+			line-name = "cam_rst";
+		};
+
+		cam_pwdn {
+			gpio-hog;
+			gpios = <15 0>;
+			output-low;
+			line-name = "cam_pwdn";
+		};
+	};
+};
+
+&i2c2 {
+	clock-div = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+
+	usb_con: connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&pio {
+	gpio_keys_default: gpiodefault {
+		pins_cmd_dat {
+			pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
+				 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins_a: i2c0@0 {
+		pins1 {
+			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
+				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2@0 {
+		pins1 {
+			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
+				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
+			bias-disable;
+		};
+	};
+
+	tca6416_pins: pinmux_tca6416_pins {
+		gpio_mux_rst_n_pin {
+			pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
+			output-high;
+		};
+
+		gpio_mux_int_n_pin {
+			pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 6238e6e..11a1bb4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra132", "nvidia,tegra124";
@@ -577,11 +578,12 @@ rtc@7000e000 {
 		clock-names = "rtc";
 	};
 
-	pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra124-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 	};
 
 	fuse@7000f800 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index f1de4ff..1af7f9f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -131,7 +131,7 @@ usb2 {
 				status = "okay";
 
 				lanes {
-					usb2-0 {
+					micro_b: usb2-0 {
 						nvidia,function = "xusb";
 						status = "okay";
 					};
@@ -174,8 +174,20 @@ ports {
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
-
 				vbus-supply = <&vdd_usb0>;
+
+				usb-role-switch;
+				connector {
+					compatible = "usb-b-connector",
+						     "gpio-usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpio = <&gpio
+						     TEGRA186_MAIN_GPIO(X, 7)
+						     GPIO_ACTIVE_LOW>;
+					id-gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+				};
+
 			};
 
 			usb2-1 {
@@ -201,12 +213,20 @@ usb@3530000 {
 		phy-names = "usb2-0", "usb2-1", "usb3-0";
 	};
 
+	usb@3550000 {
+		status = "okay";
+
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+	};
+
 	i2c@c250000 {
 		/* carrier board ID EEPROM */
 		eeprom@57 {
 			compatible = "atmel,24c02";
 			reg = <0x57>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
@@ -258,7 +278,7 @@ sor@15540000 {
 			status = "okay";
 
 			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
-			vdd-hdmi-dp-pll = <&vdd_1v8_ap>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
 
 			nvidia,dpaux = <&dpaux>;
 		};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 947744d..da96de0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -171,6 +171,7 @@ eeprom@50 {
 			compatible = "atmel,24c02";
 			reg = <0x50>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index c905527..58100fb 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -572,6 +572,25 @@ usb@3530000 {
 		nvidia,xusb-padctl = <&padctl>;
 	};
 
+	usb@3550000 {
+		compatible = "nvidia,tegra186-xudc";
+		reg = <0x0 0x03550000 0x0 0x8000>,
+		      <0x0 0x03558000 0x0 0x1000>;
+		reg-names = "base", "fpci";
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_XUSB_CORE_DEV>,
+			 <&bpmp TEGRA186_CLK_XUSB_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_FS>;
+		clock-names = "dev", "ss", "ss_src", "fs_src";
+		iommus = <&smmu TEGRA186_SID_XUSB_DEV>;
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBB>,
+				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+		power-domain-names = "dev", "ss";
+		nvidia,xusb-padctl = <&padctl>;
+		status = "disabled";
+	};
+
 	fuse@3820000 {
 		compatible = "nvidia,tegra186-efuse";
 		reg = <0x0 0x03820000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index bdd33ff..623f7d7 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -71,6 +71,29 @@ sdhci@3460000 {
 			vmmc-supply = <&vdd_emmc_3v3>;
 		};
 
+		padctl@3520000 {
+			avdd-usb-supply = <&vdd_usb_3v3>;
+			vclamp-usb-supply = <&vdd_1v8ao>;
+
+			ports {
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v_sata>;
+				};
+
+				usb3-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
 		rtc@c2a0000 {
 			status = "okay";
 		};
@@ -234,7 +257,7 @@ vdd_emmc_3v3: ldo3 {
 						regulator-max-microvolt = <3300000>;
 					};
 
-					ldo5 {
+					vdd_usb_3v3: ldo5 {
 						regulator-name = "VDD_USB_3V3";
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
@@ -317,5 +340,16 @@ vdd_12v_pcie: regulator@3 {
 			gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
 			regulator-boot-on;
 		};
+
+		vdd_5v_sata: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+
+			regulator-name = "VDD_5V_SATA";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 985e7d8..e15d1ea 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -37,6 +37,69 @@ hda@3510000 {
 			status = "okay";
 		};
 
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-3 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							status = "okay";
+						};
+
+						usb3-3 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+
+				usb3-3 {
+					nvidia,usb2-companion = <3>;
+					maximum-speed = "super-speed";
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+			phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
+		};
+
 		pwm@c340000 {
 			status = "okay";
 		};
@@ -136,6 +199,24 @@ pcie@141a0000 {
 			    "p2u-5", "p2u-6", "p2u-7";
 	};
 
+	pcie_ep@141a0000 {
+		status = "disabled";
+
+		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+		reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+		nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+					      GPIO_ACTIVE_HIGH>;
+
+		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+			    "p2u-5", "p2u-6", "p2u-7";
+	};
+
 	fan: fan {
 		compatible = "pwm-fan";
 		pwms = <&pwm4 0 45334>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index ccac43b..f4ede86 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -537,6 +537,145 @@ hda@3510000 {
 			status = "disabled";
 		};
 
+		xusb_padctl: padctl@3520000 {
+			compatible = "nvidia,tegra194-xusb-padctl";
+			reg = <0x03520000 0x1000>,
+			      <0x03540000 0x1000>;
+			reg-names = "padctl", "ao";
+
+			resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>;
+			reset-names = "padctl";
+
+			status = "disabled";
+
+			pads {
+				usb2 {
+					clocks = <&bpmp TEGRA194_CLK_USB2_TRK>;
+					clock-names = "trk";
+
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					status = "disabled";
+				};
+
+				usb2-1 {
+					status = "disabled";
+				};
+
+				usb2-2 {
+					status = "disabled";
+				};
+
+				usb2-3 {
+					status = "disabled";
+				};
+
+				usb3-0 {
+					status = "disabled";
+				};
+
+				usb3-1 {
+					status = "disabled";
+				};
+
+				usb3-2 {
+					status = "disabled";
+				};
+
+				usb3-3 {
+					status = "disabled";
+				};
+			};
+		};
+
+		usb@3610000 {
+			compatible = "nvidia,tegra194-xusb";
+			reg = <0x03610000 0x40000>,
+			      <0x03600000 0x10000>;
+			reg-names = "hcd", "fpci";
+
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
+				 <&bpmp TEGRA194_CLK_XUSB_FALCON>,
+				 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_SS>,
+				 <&bpmp TEGRA194_CLK_CLK_M>,
+				 <&bpmp TEGRA194_CLK_XUSB_FS>,
+				 <&bpmp TEGRA194_CLK_UTMIPLL>,
+				 <&bpmp TEGRA194_CLK_CLK_M>,
+				 <&bpmp TEGRA194_CLK_PLLE>;
+			clock-names = "xusb_host", "xusb_falcon_src",
+				      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+				      "xusb_fs_src", "pll_u_480m", "clk_m",
+				      "pll_e";
+
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
+					<&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "xusb_host", "xusb_ss";
+
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			status = "disabled";
+		};
+
 		fuse@3820000 {
 			compatible = "nvidia,tegra194-efuse";
 			reg = <0x03820000 0x10000>;
@@ -1208,7 +1347,7 @@ sor3: sor@15bc0000 {
 	};
 
 	pcie@14100000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14100000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x30000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1253,7 +1392,7 @@ pcie@14100000 {
 	};
 
 	pcie@14120000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14120000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x32000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1298,7 +1437,7 @@ pcie@14120000 {
 	};
 
 	pcie@14140000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14140000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x34000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1343,7 +1482,7 @@ pcie@14140000 {
 	};
 
 	pcie@14160000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
 		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x36000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1388,7 +1527,7 @@ pcie@14160000 {
 	};
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1433,7 +1572,7 @@ pcie@14180000 {
 	};
 
 	pcie@141a0000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
 		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1481,6 +1620,105 @@ pcie@141a0000 {
 			  0x82000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
+	pcie_ep@14160000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x36040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x36080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <4>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 4>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@14180000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x38040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x38080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 0>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@141a0000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 5>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
 	sysram@40000000 {
 		compatible = "nvidia,tegra194-sysram", "mmio-sram";
 		reg = <0x0 0x40000000 0x0 0x50000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index cb58f79..f87d243 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -265,11 +265,14 @@ avdd_1v05: ldo8 {
 	};
 
 	i2c@7000c500 {
+		status = "okay";
+
 		/* module ID EEPROM */
 		eeprom@50 {
 			compatible = "atmel,24c02";
 			reg = <0x50>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index a3cafe3..ea0e1ef 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -56,6 +56,7 @@ i2c@7000c400 {
 		backlight: backlight@2c {
 			compatible = "ti,lp8557";
 			reg = <0x2c>;
+			power-supply = <&vdd_3v3_sys>;
 
 			dev-ctrl = /bits/ 8 <0x80>;
 			init-brt = /bits/ 8 <0xff>;
@@ -85,6 +86,7 @@ eeprom@57 {
 			compatible = "atmel,24c02";
 			reg = <0x57>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index b009507..313a4c2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -5,6 +5,10 @@ / {
 	model = "NVIDIA Tegra210 P2597 I/O board";
 	compatible = "nvidia,p2597", "nvidia,tegra210";
 
+	aliases {
+		ethernet = "/usb@70090000/ethernet@1";
+	};
+
 	host1x@50000000 {
 		dpaux@54040000 {
 			status = "okay";
@@ -1336,7 +1340,6 @@ usb@70090000 {
 		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
 			    "usb3-1";
-
 		dvddio-pex-supply = <&vdd_pex_1v05>;
 		hvddio-pex-supply = <&vdd_1v8>;
 		avdd-usb-supply = <&vdd_3v3_sys>;
@@ -1347,6 +1350,13 @@ usb@70090000 {
 		hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
 
 		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@1 {
+			reg = <1>;
+		};
 	};
 
 	padctl@7009f000 {
@@ -1362,7 +1372,7 @@ usb2 {
 				status = "okay";
 
 				lanes {
-					usb2-0 {
+					micro_b: usb2-0 {
 						nvidia,function = "xusb";
 						status = "okay";
 					};
@@ -1440,7 +1450,19 @@ sata-0 {
 		ports {
 			usb2-0 {
 				status = "okay";
+				vbus-supply = <&vdd_usb_vbus_otg>;
 				mode = "otg";
+
+				usb-role-switch;
+				connector {
+					compatible = "usb-b-connector",
+						     "gpio-usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpio = <&gpio TEGRA_GPIO(Z, 0)
+						     GPIO_ACTIVE_LOW>;
+					id-gpio = <&pmic 0 0>;
+				};
 			};
 
 			usb2-1 {
@@ -1483,6 +1505,14 @@ sdhci@700b0000 {
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1606,6 +1636,17 @@ vdd_usb_vbus: regulator@9 {
 			vin-supply = <&vdd_5v0_sys>;
 		};
 
+		vdd_usb_vbus_otg: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "USB_VBUS_EN0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
 		vdd_hdmi: regulator@10 {
 			compatible = "regulator-fixed";
 			reg = <10>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 9101d3a..21ed175 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -114,6 +114,7 @@ eeprom@50 {
 			compatible = "atmel,24c02";
 			reg = <0x50>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
@@ -124,6 +125,7 @@ eeprom@57 {
 			compatible = "atmel,24c02";
 			reg = <0x57>;
 
+			vcc-supply = <&vdd_1v8>;
 			address-bits = <8>;
 			page-size = <8>;
 			size = <256>;
@@ -443,7 +445,7 @@ usb2 {
 				status = "okay";
 
 				lanes {
-					usb2-0 {
+					micro_b: usb2-0 {
 						nvidia,function = "xusb";
 						status = "okay";
 					};
@@ -505,7 +507,17 @@ pcie-6 {
 		ports {
 			usb2-0 {
 				status = "okay";
-				mode = "otg";
+				mode = "peripheral";
+
+				usb-role-switch;
+				connector {
+					compatible = "usb-b-connector",
+						     "gpio-usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpio = <&gpio TEGRA_GPIO(CC, 4)
+						     GPIO_ACTIVE_LOW>;
+				};
 			};
 
 			usb2-1 {
@@ -536,6 +548,14 @@ sdhci@700b0000 {
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
 	sdhci@700b0400 {
 		status = "okay";
 		bus-width = <4>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 72c7a04..2faab63 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1592,7 +1592,7 @@ nau8825@1a {
 			reg = <0x1a>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
 			clock-names = "mclk";
 
 			nuvoton,jkdet-enable;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 48c6325..64c46ce 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/reset/tegra210-car.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
 
 / {
 	compatible = "nvidia,tegra210";
@@ -770,16 +771,17 @@ rtc@7000e000 {
 		compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&pmc>;
+		interrupt-parent = <&tegra_pmc>;
 		clocks = <&tegra_car TEGRA210_CLK_RTC>;
 		clock-names = "rtc";
 	};
 
-	pmc: pmc@7000e400 {
+	tegra_pmc: pmc@7000e400 {
 		compatible = "nvidia,tegra210-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 
@@ -1207,6 +1209,25 @@ sdhci@700b0600 {
 		status = "disabled";
 	};
 
+	usb@700d0000 {
+		compatible = "nvidia,tegra210-xudc";
+		reg = <0x0 0x700d0000 0x0 0x8000>,
+		      <0x0 0x700d8000 0x0 0x1000>,
+		      <0x0 0x700d9000 0x0 0x1000>;
+		reg-names = "base", "fpci", "ipfs";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+		clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+		power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+		power-domain-names = "dev", "ss";
+		nvidia,xusb-padctl = <&padctl>;
+		status = "disabled";
+	};
+
 	mipi: mipi@700e3000 {
 		compatible = "nvidia,tegra210-mipi";
 		reg = <0x0 0x700e3000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 2153842..a7ec7a7 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,14 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
 			       r8a774c0-ek874-idk-2121wr.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-salvator-x.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
 dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
@@ -16,6 +13,7 @@
 dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb r8a77960-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb r8a77960-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb r8a77965-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
new file mode 100644
index 0000000..2ab5edd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M sub board connected to an
+ * Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+/ {
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000>;
+
+		brightness-levels = <0 2 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+};
+
+&gpio1 {
+	/*
+	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
+	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
+	 */
+	lvds-connector-en-gpio {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	status = "okay";
+};
+
+&pfc {
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 8f950da..7902343 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -2634,13 +2634,14 @@ du: display@feb00000 {
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 722>;
 			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
 			status = "disabled";
 
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index c40ea30..3137f73 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -2480,13 +2480,14 @@ du: display@feb00000 {
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 721>;
 			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
 			status = "disabled";
 
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index a53cd5f..22785cb 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1810,10 +1810,12 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
-			vsps = <&vspd0 0>, <&vspd1 0>;
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
index 1521649..3975eec 100644
--- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
@@ -30,7 +30,7 @@ &audma1 {
 };
 
 &du {
-	vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
+	renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
 };
 
 &fcpvb1 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index a8729eb7..5222954 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -3177,14 +3177,15 @@ du: display@feb00000 {
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
-				 <&cpg CPG_MOD 722>,
-				 <&cpg CPG_MOD 721>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>;
 			clock-names = "du.0", "du.1", "du.2", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
 
 			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>,
+				       <&vspd0 1>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 60f156c..3128236 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -862,6 +862,15 @@ usb3_phy0: usb-phy@e65ee000 {
 			status = "disabled";
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
@@ -2818,13 +2827,14 @@ du: display@feb00000 {
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 722>;
 			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
 
 			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>;
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
index 4abd78a..2ffc7e3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
@@ -19,7 +19,7 @@ memory@48000000 {
 		reg = <0x0 0x48000000 0x0 0x78000000>;
 	};
 
-	memory@400000000 {
+	memory@480000000 {
 		device_type = "memory";
 		reg = <0x4 0x80000000 0x0 0x80000000>;
 	};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts
new file mode 100644
index 0000000..7c6e60f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car
+ * M3-W+
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77961.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a77961";
+	compatible = "renesas,m3ulcb", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index be3824b..0d96f2d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -474,6 +474,20 @@ sysc: system-controller@e6180000 {
 			#power-domain-cells = <1>;
 		};
 
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77961-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		intc_ex: interrupt-controller@e61c0000 {
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -629,6 +643,15 @@ usb3_phy0: usb-phy@e65ee000 {
 			/* placeholder */
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a77961",
 				     "renesas,rcar-dmac";
@@ -861,6 +884,7 @@ rcar_sound,src {
 			rcar_sound,ssi {
 				ssi0: ssi-0 { };
 				ssi1: ssi-1 { };
+				ssi2: ssi-2 { };
 			};
 		};
 
@@ -1064,6 +1088,71 @@ prr: chipid@fff00044 {
 		};
 	};
 
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index c17d90b..d82dd4e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -111,6 +111,7 @@ a57_0: cpu@0 {
 			power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
 			dynamic-power-coefficient = <854>;
 			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
@@ -124,6 +125,7 @@ a57_1: cpu@1 {
 			power-domains = <&sysc R8A77965_PD_CA57_CPU1>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
@@ -134,6 +136,19 @@ L2_CA57: cache-controller-0 {
 			cache-unified;
 			cache-level = <2>;
 		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+		};
 	};
 
 	extal_clk: extal {
@@ -717,6 +732,15 @@ usb3_phy0: usb-phy@e65ee000 {
 			status = "disabled";
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
@@ -2494,13 +2518,14 @@ du: display@feb00000 {
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 				 <&cpg CPG_MOD 721>;
 			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
 
 			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>;
-			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 664a73a..a009c0e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -1121,7 +1121,9 @@ du: display@feb00000 {
 			clock-names = "du.0";
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
 			resets = <&cpg 724>;
-			vsps = <&vspd0 0>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>;
+
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index b340fb4..e01b050 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1484,15 +1484,16 @@ csi41vin7: endpoint@3 {
 		};
 
 		du: display@feb00000 {
-			compatible = "renesas,du-r8a77980",
-				     "renesas,du-r8a77970";
+			compatible = "renesas,du-r8a77980";
 			reg = <0 0xfeb00000 0 0x80000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>;
 			clock-names = "du.0";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 724>;
-			vsps = <&vspd0 0>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>;
+
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 32d91f2..1543f18 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -88,6 +88,7 @@ a53_0: cpu@0 {
 			power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			dynamic-power-coefficient = <277>;
 			clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -100,6 +101,7 @@ a53_1: cpu@1 {
 			power-domains = <&sysc R8A77990_PD_CA53_CPU1>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
 			operating-points-v2 = <&cluster1_opp>;
 		};
@@ -110,6 +112,19 @@ L2_CA53: cache-controller-0 {
 			cache-unified;
 			cache-level = <2>;
 		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
 	};
 
 	extal_clk: extal {
@@ -667,6 +682,15 @@ usb_dmac1: dma-controller@e65b0000 {
 			dma-channels = <2>;
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
@@ -1784,14 +1808,13 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
 			resets = <&cpg 724>;
 			reset-names = "du.0";
 
 			renesas,cmms = <&cmm0>, <&cmm1>;
-			vsps = <&vspd0 0>, <&vspd1 0>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 9503007..e8d2290 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -389,6 +389,15 @@ usb_dmac1: dma-controller@e65b0000 {
 			dma-channels = <2>;
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+		};
+
 		canfd: can@e66c0000 {
 			compatible = "renesas,r8a77995-canfd",
 				     "renesas,rcar-gen3-canfd";
@@ -1017,14 +1026,13 @@ du: display@feb00000 {
 			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
 			resets = <&cpg 724>;
 			reset-names = "du.0";
 
 			renesas,cmms = <&cmm0>, <&cmm1>;
-			vsps = <&vspd0 0>, <&vspd1 0>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
 
 			status = "disabled";
 
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 60d9437..ae76213 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -28,6 +28,7 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 75908c5..f809dd6 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -413,27 +413,30 @@ io_domains: io-domains {
 
 		lvds: lvds {
 			compatible = "rockchip,px30-lvds";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			phys = <&dsi_dphy>;
 			phy-names = "dphy";
 			rockchip,grf = <&grf>;
 			rockchip,output = "lvds";
 			status = "disabled";
 
-			port@0 {
-				reg = <0>;
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				lvds_vopb_in: endpoint@0 {
+				port@0 {
 					reg = <0>;
-					remote-endpoint = <&vopb_out_lvds>;
-				};
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				lvds_vopl_in: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_lvds>;
+					lvds_vopb_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vopb_out_lvds>;
+					};
+
+					lvds_vopl_in: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vopl_out_lvds>;
+					};
 				};
 			};
 		};
@@ -700,7 +703,7 @@ rktimer: timer@ff210000 {
 		clock-names = "pclk", "timer";
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -870,7 +873,6 @@ usb20_otg: usb@ff300000 {
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy_otg>;
 		phy-names = "usb2-phy";
 		power-domains = <&power PX30_PD_USB>;
@@ -882,7 +884,6 @@ usb_host0_ehci: usb@ff340000 {
 		reg = <0x0 0xff340000 0x0 0x10000>;
 		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST>;
-		clock-names = "usbhost";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		power-domains = <&power PX30_PD_USB>;
@@ -894,7 +895,6 @@ usb_host0_ohci: usb@ff350000 {
 		reg = <0x0 0xff350000 0x0 0x10000>;
 		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST>;
-		clock-names = "usbhost";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		power-domains = <&power PX30_PD_USB>;
@@ -1031,7 +1031,6 @@ vopb: vop@ff460000 {
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopb_mmu>;
 		power-domains = <&power PX30_PD_VO>;
-		rockchip,grf = <&grf>;
 		status = "disabled";
 
 		vopb_out: port {
@@ -1073,7 +1072,6 @@ vopl: vop@ff470000 {
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopl_mmu>;
 		power-domains = <&power PX30_PD_VO>;
-		rockchip,grf = <&grf>;
 		status = "disabled";
 
 		vopl_out: port {
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 116f190..ac43bc3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -40,7 +40,7 @@ cpus {
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLK>;
@@ -53,7 +53,7 @@ cpu0: cpu@0 {
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -63,7 +63,7 @@ cpu1: cpu@1 {
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -73,7 +73,7 @@ cpu2: cpu@2 {
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -513,7 +513,7 @@ saradc: saradc@ff1e0000 {
 		status = "disabled";
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 16f1656..797e90a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -60,6 +60,7 @@ &analog_sound {
 };
 
 &codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 62936b4..bf3e546 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -104,6 +104,7 @@ dit_p0_0: endpoint {
 };
 
 &codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	port@0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 1f53ead..7e88d88 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -142,7 +142,7 @@ opp-1296000000 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -906,6 +906,7 @@ gmac2io: ethernet@ff540000 {
 		resets = <&cru SRST_GMAC2IO_A>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
 		status = "disabled";
 	};
 
@@ -927,6 +928,7 @@ gmac2phy: ethernet@ff550000 {
 		reset-names = "stmmaceth", "mac-phy";
 		phy-mode = "rmii";
 		phy-handle = <&phy>;
+		snps,txpbl = <0x4>;
 		status = "disabled";
 
 		mdio {
@@ -957,7 +959,6 @@ usb20_otg: usb@ff580000 {
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
-		g-use-dma;
 		phys = <&u2phy_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -968,7 +969,6 @@ usb_host0_ehci: usb@ff5c0000 {
 		reg = <0x0 0xff5c0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -979,7 +979,6 @@ usb_host0_ohci: usb@ff5d0000 {
 		reg = <0x0 0xff5d0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 231db030..5ffd7b4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -239,7 +239,6 @@ &sdmmc {
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
-	no-emmc;
 	no-sdio;
 	sd-uhs-sdr12;
 	sd-uhs-sdr25;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index a0df61c..1ebb0ee 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -136,7 +136,7 @@ cpu_b3: cpu@103 {
 		};
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -513,7 +513,6 @@ usb_host0_ehci: usb@ff500000 {
 		reg = <0x0 0xff500000 0x0 0x100>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>;
-		clock-names = "usbhost";
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 77008dc..694b0d0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -9,8 +9,7 @@
 
 / {
 	model = "Rockchip RK3399 Evaluation Board";
-	compatible = "rockchip,rk3399-evb", "rockchip,rk3399",
-		     "google,rk3399evb-rev2";
+	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
@@ -48,10 +47,22 @@ backlight: backlight {
 			240 241 242 243 244 245 246 247
 			248 249 250 251 252 253 254 255>;
 		default-brightness-level = <200>;
-		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pwms = <&pwm0 0 25000 0>;
 	};
 
+	edp_panel: edp-panel {
+		compatible ="lg,lp079qx1-sp0v";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vcc3v3_s0>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -114,6 +125,24 @@ vcc_phy: vcc-phy-regulator {
 
 };
 
+&edp {
+	status = "okay";
+	force-hpd;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
 &emmc_phy {
 	status = "okay";
 };
@@ -134,6 +163,228 @@ &gmac {
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
 &pwm0 {
 	status = "okay";
 };
@@ -210,11 +461,6 @@ pmic_int_l: pmic-int-l {
 			rockchip,pins =
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
-
-		pmic_dvs2: pmic-dvs2 {
-			rockchip,pins =
-				<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
 	};
 
 	usb2 {
@@ -224,3 +470,11 @@ vcc5v0_host_en: vcc5v0-host-en {
 		};
 	};
 };
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 7cd6d47..1384dab 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -291,11 +291,9 @@ cros_ec_pwm: ec-pwm {
 		#pwm-cells = <1>;
 	};
 
-	usbc_extcon1: extcon@1 {
+	usbc_extcon1: extcon1 {
 		compatible = "google,extcon-usbc-cros-ec";
 		google,usb-port-id = <1>;
-
-		#extcon-cells = <0>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index dd56249..2f39977 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -570,11 +570,9 @@ i2c_tunnel: i2c-tunnel {
 			#size-cells = <0>;
 		};
 
-		usbc_extcon0: extcon@0 {
+		usbc_extcon0: extcon0 {
 			compatible = "google,extcon-usbc-cros-ec";
 			google,usb-port-id = <0>;
-
-			#extcon-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index d69a613..aee484a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -29,6 +29,26 @@ dc_5v: dc-5v {
 		regulator-max-microvolt = <5000000>;
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_led_gpio>;
+
+		led-0 {
+			label = "blue:power";
+			gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "default-on";
+		};
+	};
+
 	vcc_sys: vcc-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -483,6 +503,18 @@ rgmii_sleep_pins: rgmii-sleep-pins {
 		};
 	};
 
+	ir {
+		ir_rx: ir-rx {
+			rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led_gpio: power-led-gpio {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins =
@@ -539,10 +571,6 @@ host_vbus_drv: host-vbus-drv {
 	};
 };
 
-&pwm0 {
-	status = "okay";
-};
-
 &pwm2 {
 	status = "okay";
 	pinctrl-0 = <&pwm2_pin_pull_down>;
@@ -555,7 +583,7 @@ &saradc {
 
 &sdmmc {
 	clock-frequency = <150000000>;
-	clock-freq-min-max = <200000 150000000>;
+	max-frequency = <150000000>;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
@@ -610,7 +638,6 @@ &spdif {
 
 &spi1 {
 	status = "okay";
-	max-freq = <10000000>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 9c659f3..f9f7246 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -202,14 +202,27 @@ &gmac {
 	clock_in_out = "input";
 	phy-supply = <&vcc3v3_s3>;
 	phy-mode = "rgmii";
+	phy-handle = <&rtl8211e>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
+	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
 	tx_delay = <0x28>;
 	rx_delay = <0x11>;
 	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &gpu {
@@ -419,6 +432,8 @@ vdd_cpu_b: regulator@40 {
 		compatible = "silergy,syr827";
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -436,6 +451,8 @@ vdd_gpu: regulator@41 {
 		compatible = "silergy,syr828";
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -537,7 +554,25 @@ pwr_btn: pwr-btn {
 		};
 	};
 
+	phy {
+		phy_intb: phy-intb {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rstb: phy-rstb {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
 		pmic_int_l: pmic-int-l {
 			rockchip,pins =
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
new file mode 100644
index 0000000..5ea281b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -0,0 +1,1096 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Pine64 Pinebook Pro";
+	compatible = "pine64,pinebook-pro", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: edp-backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_12v>;
+		pwms = <&pwm0 0 740740 0>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv140fhmn49";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_gpio>;
+		power-supply = <&vcc3v3_panel>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				panel_in_edp: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * Use separate nodes for gpio-keys to allow for selective deactivation
+	 * of wakeup sources via sysfs without disabling the whole key
+	 */
+	gpio-key-lid {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lidbtn_gpio>;
+
+		lid {
+			debounce-interval = <20>;
+			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "Lid";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-key-power {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn_gpio>;
+
+		power {
+			debounce-interval = <20>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
+
+		green-led {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+			label = "green:power";
+		};
+
+		red-led {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STANDBY;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "red:standby";
+			panic-indicator;
+			retain-state-suspended;
+		};
+	};
+
+	/* Power sequence for SDIO WiFi module */
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h_gpio>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <500000>;
+
+		/* WL_REG_ON on module */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Audio components */
+	es8316-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_gpio>;
+		simple-audio-card,name = "rockchip,es8316-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker Amplifier INL", "HPOL",
+			"Speaker Amplifier INR", "HPOR",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR";
+
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+		simple-audio-card,aux-devs = <&speaker_amp>;
+		simple-audio-card,pin-switches = "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8316>;
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&pa_5v>;
+	};
+
+	/* Power tree */
+	/* Root power source */
+	vcc_sysin: vcc-sysin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sysin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Regulators supplied by vcc_sysin */
+	/* LCD backlight supply */
+	vcc_12v: vcc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Main 3.3 V supply */
+	vcc3v3_sys: wifi_bat: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* 5 V USB power supply */
+	vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_5v_gpio>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* RK3399 logic supply */
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc3v3_sys */
+	/* 0.9 V supply, always on */
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* S3 1.8 V supply, switched by vcc1v8_s3 */
+	vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* LCD panel power, called VCC3V3_S0 in schematic */
+	vcc3v3_panel: vcc3v3-panel {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdvcc_en_gpio>;
+		regulator-name = "vcc3v3_panel";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <100000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* M.2 adapter power, switched by vcc1v8_s3 */
+	vcc3v3_ssd: vcc3v3-ssd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ssd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* USB 3 port power supply regulator  */
+	vcc5v0_otg: vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en_gpio>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* Type C port power supply regulator */
+	vbus_5vout: vbus_typec: vbus-5vout {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
+		regulator-name = "vbus_5vout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc_1v8 */
+	/* Primary 0.9 V LDO */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v9_s3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	mains_charger: dc-charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
+
+		/* Also triggered by USB charger */
+		pinctrl-names = "default";
+		pinctrl-0 = <&dc_det_gpio>;
+	};
+};
+
+&cdn_dp {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&edp {
+	force-hpd;
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l_gpio>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sysin>;
+		vcc2-supply = <&vcc_sysin>;
+		vcc3-supply = <&vcc_sysin>;
+		vcc4-supply = <&vcc_sysin>;
+		vcc6-supply = <&vcc_sysin>;
+		vcc7-supply = <&vcc_sysin>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sysin>;
+		vcc10-supply = <&vcc_sysin>;
+		vcc11-supply = <&vcc_sysin>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vcc13-supply = <&vcc_sysin>;
+		vcc14-supply = <&vcc_sysin>;
+
+		regulators {
+			/* rk3399 center logic supply */
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: vcc_wl: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* not used */
+			LDO_REG1 {
+			};
+
+			/* not used */
+			LDO_REG2 {
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	es8316: es8316@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-falling-time-ns = <15>;
+	i2c-scl-rising-time-ns = <450>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <600>;
+	status = "okay";
+
+	fusb0: fusb30x@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int_gpio>;
+		vbus-supply = <&vbus_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "host";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint =
+							<&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usbc_dp: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_dp>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2s1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
+	rockchip,capture-channels = <8>;
+	rockchip,playback-channels = <8>;
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	bus-scan-delay-ms = <1000>;
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
+	vpcie3v3-supply = <&vcc3v3_ssd>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn_gpio: pwrbtn-gpio {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		lidbtn_gpio: lidbtn-gpio {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dc-charger {
+		dc_det_gpio: dc-det-gpio {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	es8316 {
+		hp_det_gpio: hp-det-gpio {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int_gpio: fusb0-int-gpio {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	i2s1 {
+		i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
+			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcdvcc_en_gpio: lcdvcc-en-gpio {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		panel_en_gpio: panel-en-gpio {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lcd_panel_reset_gpio: lcd-panel-reset-gpio {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		pwrled_gpio: pwrled_gpio {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		slpled_gpio: slpled_gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l_gpio: pmic-int-l-gpio {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdcard {
+		sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h_gpio: wifi-enable-h-gpio {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		pwr_5v_gpio: pwr-5v-gpio {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_wake_gpio: bt-wake-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_gpio: bt-host-wake-gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_gpio: bt-reset-gpio {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	max-freq = <10000000>;
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_dp {
+	port {
+		tcphy0_typec_dp: endpoint {
+			remote-endpoint = <&usbc_dp>;
+		};
+	};
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&wifi_bat>;
+		vddio-supply = <&vcc_wl>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index c1edca3..07694b1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -480,7 +480,7 @@ &sdhci {
 };
 
 &sdmmc {
-	vqmmc = <&vcc_sd>;
+	vqmmc-supply = <&vcc_sd>;
 };
 
 &spi1 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index b69f0f2..ba7c75c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -542,7 +542,7 @@ &sdmmc {
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <100000 100000000>;
+	max-frequency = <100000000>;
 	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	sd-uhs-sdr104;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index b4d8f60..73e269a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -230,7 +230,5 @@ &sdio0 {
 };
 
 &spdif {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 33cc21f..74f2c3d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -197,7 +197,7 @@ xin24m: xin24m {
 		#clock-cells = <0>;
 	};
 
-	amba {
+	amba: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -288,6 +288,7 @@ gmac: ethernet@fe300000 {
 		resets = <&cru SRST_A_GMAC>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
 		status = "disabled";
 	};
 
@@ -349,8 +350,6 @@ usb_host0_ehci: usb@fe380000 {
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
 			 <&u2phy0>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -362,8 +361,6 @@ usb_host0_ohci: usb@fe3a0000 {
 		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
 			 <&u2phy0>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -375,8 +372,6 @@ usb_host1_ehci: usb@fe3c0000 {
 		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
 			 <&u2phy1>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -388,8 +383,6 @@ usb_host1_ohci: usb@fe3e0000 {
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
 			 <&u2phy1>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
index b42f941..a1783e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -13,5 +13,6 @@
 
 / {
 	model = "Radxa ROCK Pi N10";
-	compatible = "radxa,rockpi-n10", "rockchip,rk3399pro";
+	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
+		     "rockchip,rk3399pro";
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 5b18bda..2ca2d3d 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -143,8 +143,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
 		};
 
 		serial0: serial@54006800 {
@@ -433,7 +433,7 @@ peri_rst: reset {
 			};
 		};
 
-		emmc: sdhc@5a000000 {
+		emmc: mmc@5a000000 {
 			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
@@ -566,7 +566,7 @@ efuse@200 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-ld11-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -621,7 +621,7 @@ mdio: mdio {
 			};
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index f2dc5f6..a93148c 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -248,8 +248,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
 		};
 
 		spi2: spi@54006200 {
@@ -259,8 +259,8 @@ spi2: spi@54006200 {
 			interrupts = <0 229 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi2>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 13>;
+			resets = <&peri_rst 13>;
 		};
 
 		spi3: spi@54006300 {
@@ -270,8 +270,8 @@ spi3: spi@54006300 {
 			interrupts = <0 230 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi3>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 14>;
+			resets = <&peri_rst 14>;
 		};
 
 		serial0: serial@54006800 {
@@ -559,7 +559,7 @@ peri_rst: reset {
 			};
 		};
 
-		emmc: sdhc@5a000000 {
+		emmc: mmc@5a000000 {
 			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
@@ -578,7 +578,7 @@ emmc: sdhc@5a000000 {
 			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
@@ -664,7 +664,7 @@ usb_hs_i2: trim@5a,0 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-ld20-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -925,7 +925,7 @@ pcie_phy: phy@66038000 {
 			socionext,syscon = <&soc_glue>;
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index 754315b..4d00ff9 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -27,6 +27,8 @@ aliases {
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
 		i2c6 = &i2c6;
+		spi0 = &spi0;
+		spi1 = &spi1;
 	};
 
 	memory@80000000 {
@@ -39,6 +41,14 @@ &ethsc {
 	interrupts = <4 8>;
 };
 
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
 &serial0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 73e7e12..616835b 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "socionext,uniphier-pxs3";
@@ -42,6 +43,7 @@ cpu0: cpu@0 {
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -51,6 +53,7 @@ cpu1: cpu@1 {
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -60,6 +63,7 @@ cpu2: cpu@2 {
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -69,6 +73,7 @@ cpu3: cpu@3 {
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -136,6 +141,37 @@ timer {
 			     <1 10 4>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -171,8 +207,8 @@ spi1: spi@54006100 {
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
 		};
 
 		serial0: serial@54006800 {
@@ -353,7 +389,7 @@ peri_rst: reset {
 			};
 		};
 
-		emmc: sdhc@5a000000 {
+		emmc: mmc@5a000000 {
 			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
@@ -372,7 +408,7 @@ emmc: sdhc@5a000000 {
 			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
@@ -462,7 +498,7 @@ usb_hs_i2: trim@5a,0 {
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pxs3-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -496,6 +532,13 @@ sys_rst: reset {
 			watchdog {
 				compatible = "socionext,uniphier-wdt";
 			};
+
+			pvtctl: pvtctl {
+				compatible = "socionext,uniphier-pxs3-thermal";
+				interrupts = <0 3 4>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
 		};
 
 		eth0: ethernet@65000000 {
@@ -783,7 +826,7 @@ pcie_phy: phy@66038000 {
 			socionext,syscon = <&soc_glue>;
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index e5df20a..11887c7 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -189,6 +189,8 @@ main_spi0: spi@2100000 {
 		power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx0", "rx0";
 	};
 
 	main_spi1: spi@2110000 {
@@ -296,6 +298,7 @@ dwc3_0: dwc3@4000000 {
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
@@ -335,6 +338,7 @@ dwc3_1: dwc3@4020000 {
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 2>;
 		assigned-clocks = <&k3_clks 152 2>;
 		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 92629cb..e23a108 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -12,6 +12,12 @@ mcu_conf: scm_conf@40f00000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -82,6 +88,9 @@ tscadc0: tscadc@40200000 {
 		assigned-clocks = <&k3_clks 0 2>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&mcu_udmap 0x7100>,
+			<&mcu_udmap 0x7101 >;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -97,6 +106,9 @@ tscadc1: tscadc@40210000 {
 		assigned-clocks = <&k3_clks 1 2>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&mcu_udmap 0x7102>,
+			<&mcu_udmap 0x7103>;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 16c874b..870f730c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -34,6 +34,20 @@ k3_reset: reset-controller {
 		};
 	};
 
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
 	wkup_pmx0: pinmux@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
@@ -203,6 +217,9 @@ tscadc0: tscadc@40200000 {
 		assigned-clocks = <&k3_clks 0 3>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -219,6 +236,9 @@ tscadc1: tscadc@40210000 {
 		assigned-clocks = <&k3_clks 1 3>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index c5e7316..a181eb2 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -523,6 +523,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MN_CLK_SAI5_IPG] = imx_clk_hw_gate2_shared2("sai5_ipg_clk", "ipg_audio_root", base + 0x4370, 0, &share_count_sai5);
 	hws[IMX8MN_CLK_SAI6_ROOT] = imx_clk_hw_gate2_shared2("sai6_root_clk", "sai6", base + 0x4380, 0, &share_count_sai6);
 	hws[IMX8MN_CLK_SAI6_IPG] = imx_clk_hw_gate2_shared2("sai6_ipg_clk", "ipg_audio_root", base + 0x4380, 0, &share_count_sai6);
+	hws[IMX8MN_CLK_SNVS_ROOT] = imx_clk_hw_gate4("snvs_root_clk", "ipg_root", base + 0x4470, 0);
 	hws[IMX8MN_CLK_UART1_ROOT] = imx_clk_hw_gate4("uart1_root_clk", "uart1", base + 0x4490, 0);
 	hws[IMX8MN_CLK_UART2_ROOT] = imx_clk_hw_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0);
 	hws[IMX8MN_CLK_UART3_ROOT] = imx_clk_hw_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
index 0837c1a..b0d65d7 100644
--- a/include/dt-bindings/clock/g12a-clkc.h
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -143,5 +143,7 @@
 #define CLKID_CPU1_CLK				253
 #define CLKID_CPU2_CLK				254
 #define CLKID_CPU3_CLK				255
+#define CLKID_SPICC0_SCLK			258
+#define CLKID_SPICC1_SCLK			261
 
 #endif /* __G12A_CLKC_H */
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index db0763e..4073eb7 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -146,5 +146,6 @@
 #define CLKID_CTS_VDAC		201
 #define CLKID_HDMI_TX		202
 #define CLKID_HDMI		205
+#define CLKID_ACODEC		206
 
 #endif /* __GXBB_CLKC_H */
diff --git a/include/dt-bindings/clock/imx8mn-clock.h b/include/dt-bindings/clock/imx8mn-clock.h
index 0f2b842..43883fe 100644
--- a/include/dt-bindings/clock/imx8mn-clock.h
+++ b/include/dt-bindings/clock/imx8mn-clock.h
@@ -228,6 +228,8 @@
 #define IMX8MN_SYS_PLL2_333M_CG			209
 #define IMX8MN_SYS_PLL2_500M_CG			210
 
-#define IMX8MN_CLK_END				211
+#define IMX8MN_CLK_SNVS_ROOT			211
+
+#define IMX8MN_CLK_END				212
 
 #endif
diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h
index bb5c2c9..df59aaf 100644
--- a/include/dt-bindings/clock/tegra114-car.h
+++ b/include/dt-bindings/clock/tegra114-car.h
@@ -228,6 +228,8 @@
 #define TEGRA114_CLK_CLK_M 201
 #define TEGRA114_CLK_CLK_M_DIV2 202
 #define TEGRA114_CLK_CLK_M_DIV4 203
+#define TEGRA114_CLK_OSC_DIV2 202
+#define TEGRA114_CLK_OSC_DIV4 203
 #define TEGRA114_CLK_PLL_REF 204
 #define TEGRA114_CLK_PLL_C 205
 #define TEGRA114_CLK_PLL_C_OUT1 206
@@ -274,7 +276,7 @@
 #define TEGRA114_CLK_CLK_OUT_2 246
 #define TEGRA114_CLK_CLK_OUT_3 247
 #define TEGRA114_CLK_BLINK 248
-/* 249 */
+#define TEGRA114_CLK_OSC 249
 /* 250 */
 /* 251 */
 #define TEGRA114_CLK_XUSB_HOST_SRC 252
diff --git a/include/dt-bindings/clock/tegra124-car-common.h b/include/dt-bindings/clock/tegra124-car-common.h
index 0c4f5be..2a9acd5 100644
--- a/include/dt-bindings/clock/tegra124-car-common.h
+++ b/include/dt-bindings/clock/tegra124-car-common.h
@@ -227,6 +227,8 @@
 #define TEGRA124_CLK_CLK_M 201
 #define TEGRA124_CLK_CLK_M_DIV2 202
 #define TEGRA124_CLK_CLK_M_DIV4 203
+#define TEGRA124_CLK_OSC_DIV2 202
+#define TEGRA124_CLK_OSC_DIV4 203
 #define TEGRA124_CLK_PLL_REF 204
 #define TEGRA124_CLK_PLL_C 205
 #define TEGRA124_CLK_PLL_C_OUT1 206
@@ -273,7 +275,7 @@
 #define TEGRA124_CLK_CLK_OUT_2 246
 #define TEGRA124_CLK_CLK_OUT_3 247
 #define TEGRA124_CLK_BLINK 248
-/* 249 */
+#define TEGRA124_CLK_OSC 249
 /* 250 */
 /* 251 */
 #define TEGRA124_CLK_XUSB_HOST_SRC 252
diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
index 44f6062..7a8f10b 100644
--- a/include/dt-bindings/clock/tegra210-car.h
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -262,6 +262,8 @@
 #define TEGRA210_CLK_CLK_M 233
 #define TEGRA210_CLK_CLK_M_DIV2 234
 #define TEGRA210_CLK_CLK_M_DIV4 235
+#define TEGRA210_CLK_OSC_DIV2 234
+#define TEGRA210_CLK_OSC_DIV4 235
 #define TEGRA210_CLK_PLL_REF 236
 #define TEGRA210_CLK_PLL_C 237
 #define TEGRA210_CLK_PLL_C_OUT1 238
@@ -355,7 +357,7 @@
 #define TEGRA210_CLK_PLL_A_OUT_ADSP 323
 #define TEGRA210_CLK_PLL_A_OUT0_OUT_ADSP 324
 /* 325 */
-/* 326 */
+#define TEGRA210_CLK_OSC 326
 /* 327 */
 /* 328 */
 /* 329 */
diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h
index 3c90f15..7b542c1 100644
--- a/include/dt-bindings/clock/tegra30-car.h
+++ b/include/dt-bindings/clock/tegra30-car.h
@@ -196,6 +196,8 @@
 #define TEGRA30_CLK_CLK_M 171
 #define TEGRA30_CLK_CLK_M_DIV2 172
 #define TEGRA30_CLK_CLK_M_DIV4 173
+#define TEGRA30_CLK_OSC_DIV2 172
+#define TEGRA30_CLK_OSC_DIV4 173
 #define TEGRA30_CLK_PLL_REF 174
 #define TEGRA30_CLK_PLL_C 175
 #define TEGRA30_CLK_PLL_C_OUT1 176
@@ -243,7 +245,7 @@
 #define TEGRA30_CLK_HCLK 217
 #define TEGRA30_CLK_PCLK 218
 /* 219 */
-/* 220 */
+#define TEGRA30_CLK_OSC 220
 /* 221 */
 /* 222 */
 /* 223 */
diff --git a/include/dt-bindings/soc/tegra-pmc.h b/include/dt-bindings/soc/tegra-pmc.h
new file mode 100644
index 0000000..a99a457
--- /dev/null
+++ b/include/dt-bindings/soc/tegra-pmc.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_SOC_TEGRA_PMC_H
+#define _DT_BINDINGS_SOC_TEGRA_PMC_H
+
+#define TEGRA_PMC_CLK_OUT_1		0
+#define TEGRA_PMC_CLK_OUT_2		1
+#define TEGRA_PMC_CLK_OUT_3		2
+#define TEGRA_PMC_CLK_BLINK		3
+
+#define TEGRA_PMC_CLK_MAX		4
+
+#endif	/* _DT_BINDINGS_SOC_TEGRA_PMC_H */