blob: be5085451053be4fcd554ddb0158960b52a2d207 [file] [log] [blame]
/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
/*
* Copyright 2015-2016 Freescale Semiconductor Inc.
* Copyright 2017-2018 NXP
*/
#ifndef _CAAMALG_QI2_H_
#define _CAAMALG_QI2_H_
#include <soc/fsl/dpaa2-io.h>
#include <soc/fsl/dpaa2-fd.h>
#include <linux/threads.h>
#include "dpseci.h"
#include "desc_constr.h"
#define DPAA2_CAAM_STORE_SIZE 16
/* NAPI weight *must* be a multiple of the store size. */
#define DPAA2_CAAM_NAPI_WEIGHT 64
/* The congestion entrance threshold was chosen so that on LS2088
* we support the maximum throughput for the available memory
*/
#define DPAA2_SEC_CONG_ENTRY_THRESH (128 * 1024 * 1024)
#define DPAA2_SEC_CONG_EXIT_THRESH (DPAA2_SEC_CONG_ENTRY_THRESH * 9 / 10)
/**
* dpaa2_caam_priv - driver private data
* @dpseci_id: DPSECI object unique ID
* @major_ver: DPSECI major version
* @minor_ver: DPSECI minor version
* @dpseci_attr: DPSECI attributes
* @sec_attr: SEC engine attributes
* @rx_queue_attr: array of Rx queue attributes
* @tx_queue_attr: array of Tx queue attributes
* @cscn_mem: pointer to memory region containing the congestion SCN
* it's size is larger than to accommodate alignment
* @cscn_mem_aligned: pointer to congestion SCN; it is computed as
* PTR_ALIGN(cscn_mem, DPAA2_CSCN_ALIGN)
* @cscn_dma: dma address used by the QMAN to write CSCN messages
* @dev: device associated with the DPSECI object
* @mc_io: pointer to MC portal's I/O object
* @domain: IOMMU domain
* @ppriv: per CPU pointers to privata data
*/
struct dpaa2_caam_priv {
int dpsec_id;
u16 major_ver;
u16 minor_ver;
struct dpseci_attr dpseci_attr;
struct dpseci_sec_attr sec_attr;
struct dpseci_rx_queue_attr rx_queue_attr[DPSECI_MAX_QUEUE_NUM];
struct dpseci_tx_queue_attr tx_queue_attr[DPSECI_MAX_QUEUE_NUM];
int num_pairs;
/* congestion */
void *cscn_mem;
void *cscn_mem_aligned;
dma_addr_t cscn_dma;
struct device *dev;
struct fsl_mc_io *mc_io;
struct iommu_domain *domain;
struct dpaa2_caam_priv_per_cpu __percpu *ppriv;
};
/**
* dpaa2_caam_priv_per_cpu - per CPU private data
* @napi: napi structure
* @net_dev: netdev used by napi
* @req_fqid: (virtual) request (Tx / enqueue) FQID
* @rsp_fqid: (virtual) response (Rx / dequeue) FQID
* @prio: internal queue number - index for dpaa2_caam_priv.*_queue_attr
* @nctx: notification context of response FQ
* @store: where dequeued frames are stored
* @priv: backpointer to dpaa2_caam_priv
* @dpio: portal used for data path operations
*/
struct dpaa2_caam_priv_per_cpu {
struct napi_struct napi;
struct net_device net_dev;
int req_fqid;
int rsp_fqid;
int prio;
struct dpaa2_io_notification_ctx nctx;
struct dpaa2_io_store *store;
struct dpaa2_caam_priv *priv;
struct dpaa2_io *dpio;
};
/*
* The CAAM QI hardware constructs a job descriptor which points
* to shared descriptor (as pointed by context_a of FQ to CAAM).
* When the job descriptor is executed by deco, the whole job
* descriptor together with shared descriptor gets loaded in
* deco buffer which is 64 words long (each 32-bit).
*
* The job descriptor constructed by QI hardware has layout:
*
* HEADER (1 word)
* Shdesc ptr (1 or 2 words)
* SEQ_OUT_PTR (1 word)
* Out ptr (1 or 2 words)
* Out length (1 word)
* SEQ_IN_PTR (1 word)
* In ptr (1 or 2 words)
* In length (1 word)
*
* The shdesc ptr is used to fetch shared descriptor contents
* into deco buffer.
*
* Apart from shdesc contents, the total number of words that
* get loaded in deco buffer are '8' or '11'. The remaining words
* in deco buffer can be used for storing shared descriptor.
*/
#define MAX_SDLEN ((CAAM_DESC_BYTES_MAX - DESC_JOB_IO_LEN) / CAAM_CMD_SZ)
/* Length of a single buffer in the QI driver memory cache */
#define CAAM_QI_MEMCACHE_SIZE 512
/*
* aead_edesc - s/w-extended aead descriptor
* @src_nents: number of segments in input scatterlist
* @dst_nents: number of segments in output scatterlist
* @iv_dma: dma address of iv for checking continuity and link table
* @qm_sg_bytes: length of dma mapped h/w link table
* @qm_sg_dma: bus physical mapped address of h/w link table
* @assoclen: associated data length, in CAAM endianness
* @assoclen_dma: bus physical mapped address of req->assoclen
* @sgt: the h/w link table, followed by IV
*/
struct aead_edesc {
int src_nents;
int dst_nents;
dma_addr_t iv_dma;
int qm_sg_bytes;
dma_addr_t qm_sg_dma;
unsigned int assoclen;
dma_addr_t assoclen_dma;
struct dpaa2_sg_entry sgt[0];
};
/*
* skcipher_edesc - s/w-extended skcipher descriptor
* @src_nents: number of segments in input scatterlist
* @dst_nents: number of segments in output scatterlist
* @iv_dma: dma address of iv for checking continuity and link table
* @qm_sg_bytes: length of dma mapped qm_sg space
* @qm_sg_dma: I/O virtual address of h/w link table
* @sgt: the h/w link table, followed by IV
*/
struct skcipher_edesc {
int src_nents;
int dst_nents;
dma_addr_t iv_dma;
int qm_sg_bytes;
dma_addr_t qm_sg_dma;
struct dpaa2_sg_entry sgt[0];
};
/*
* ahash_edesc - s/w-extended ahash descriptor
* @qm_sg_dma: I/O virtual address of h/w link table
* @src_nents: number of segments in input scatterlist
* @qm_sg_bytes: length of dma mapped qm_sg space
* @sgt: pointer to h/w link table
*/
struct ahash_edesc {
dma_addr_t qm_sg_dma;
int src_nents;
int qm_sg_bytes;
struct dpaa2_sg_entry sgt[0];
};
/**
* caam_flc - Flow Context (FLC)
* @flc: Flow Context options
* @sh_desc: Shared Descriptor
*/
struct caam_flc {
u32 flc[16];
u32 sh_desc[MAX_SDLEN];
} ____cacheline_aligned;
enum optype {
ENCRYPT = 0,
DECRYPT,
NUM_OP
};
/**
* caam_request - the request structure the driver application should fill while
* submitting a job to driver.
* @fd_flt: Frame list table defining input and output
* fd_flt[0] - FLE pointing to output buffer
* fd_flt[1] - FLE pointing to input buffer
* @fd_flt_dma: DMA address for the frame list table
* @flc: Flow Context
* @flc_dma: I/O virtual address of Flow Context
* @cbk: Callback function to invoke when job is completed
* @ctx: arbit context attached with request by the application
* @edesc: extended descriptor; points to one of {skcipher,aead}_edesc
*/
struct caam_request {
struct dpaa2_fl_entry fd_flt[2];
dma_addr_t fd_flt_dma;
struct caam_flc *flc;
dma_addr_t flc_dma;
void (*cbk)(void *ctx, u32 err);
void *ctx;
void *edesc;
};
/**
* dpaa2_caam_enqueue() - enqueue a crypto request
* @dev: device associated with the DPSECI object
* @req: pointer to caam_request
*/
int dpaa2_caam_enqueue(struct device *dev, struct caam_request *req);
#endif /* _CAAMALG_QI2_H_ */