blob: 514d82ced95bbed3792ab642cafc67af0353cd8d [file] [log] [blame]
======================================================================
Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller
======================================================================
The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
primary use case of the Aspeed LPC controller is as a slave on the bus
(typically in a Baseboard Management Controller SoC), but under certain
conditions it can also take the role of bus master.
The LPC controller is represented as a multi-function device to account for the
mix of functionality it provides. The principle split is between the register
layout at the start of the I/O space which is, to quote the Aspeed datasheet,
"basically compatible with the [LPC registers from the] popular BMC controller
H8S/2168[1]", and everything else, where everything else is an eclectic
collection of functions with a esoteric register layout. "Everything else",
here labeled the "host" portion of the controller, includes, but is not limited
to:
* An IPMI Block Transfer[2] Controller
* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the
physical properties of some LPC pins, configuration of serial IRQs, and
APB-to-LPC bridging amonst other functions.
* An LPC Host Interface Controller: Manages functions exposed to the host such
as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
management and bus snoop configuration.
* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom
hardware management protocols for handover between the host and baseboard
management controller.
Additionally the state of the LPC controller influences the pinmux
configuration, therefore the host portion of the controller is exposed as a
syscon as a means to arbitrate access.
[0] http://www.intel.com/design/chipsets/industry/25128901.pdf
[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4
[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
[3] https://en.wikipedia.org/wiki/Super_I/O
Required properties
===================
- compatible: One of:
"aspeed,ast2400-lpc", "simple-mfd"
"aspeed,ast2500-lpc", "simple-mfd"
- reg: contains the physical address and length values of the Aspeed
LPC memory region.
- #address-cells: <1>
- #size-cells: <1>
- ranges: Maps 0 to the physical address and length of the LPC memory
region
Required LPC Child nodes
========================
BMC Node
--------
- compatible: One of:
"aspeed,ast2400-lpc-bmc"
"aspeed,ast2500-lpc-bmc"
- reg: contains the physical address and length values of the
H8S/2168-compatible LPC controller memory region
Host Node
---------
- compatible: One of:
"aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
"aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
- reg: contains the address and length values of the host-related
register space for the Aspeed LPC controller
- #address-cells: <1>
- #size-cells: <1>
- ranges: Maps 0 to the address and length of the host-related LPC memory
region
Example:
lpc: lpc@1e789000 {
compatible = "aspeed,ast2500-lpc", "simple-mfd";
reg = <0x1e789000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1e789000 0x1000>;
lpc_bmc: lpc-bmc@0 {
compatible = "aspeed,ast2500-lpc-bmc";
reg = <0x0 0x80>;
};
lpc_host: lpc-host@80 {
compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
reg = <0x80 0x1e0>;
reg-io-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x80 0x1e0>;
};
};
Host Node Children
==================
LPC Host Controller
-------------------
The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
between the host and the baseboard management controller. The registers exist
in the "host" portion of the Aspeed LPC controller, which must be the parent of
the LPC host controller node.
Required properties:
- compatible: One of:
"aspeed,ast2400-lhc";
"aspeed,ast2500-lhc";
- reg: contains offset/length values of the LHC memory regions. In the
AST2400 and AST2500 there are two regions.
Example:
lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
reg = <0x20 0x24 0x48 0x8>;
};