blob: b837fec70eec8cb7d241d14559c8fad9c0cbb909 [file] [log] [blame]
/*
* Copyright (c) 2016 BayLibre, Inc.
*
* Licensed under GPLv2.
*/
/dts-v1/;
#include "da850.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "DA850/AM1808/OMAP-L138 LCDK";
compatible = "ti,da850-lcdk", "ti,da850";
aliases {
serial2 = &serial2;
ethernet0 = &eth0;
};
chosen {
stdout-path = "serial2:115200n8";
};
memory {
device_type = "memory";
reg = <0xc0000000 0x08000000>;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "DA850/OMAP-L138 LCDK";
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out";
simple-audio-card,routing =
"LINE1L", "Line In",
"LINE1R", "Line In",
"Line Out", "LLOUT",
"Line Out", "RLOUT";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&link0_codec>;
simple-audio-card,frame-master = <&link0_codec>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp0>;
system-clock-frequency = <24576000>;
};
link0_codec: simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
system-clock-frequency = <24576000>;
};
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
user1 {
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
};
user2 {
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
};
vga-bridge {
compatible = "ti,ths8135";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
vga_bridge_in: endpoint {
remote-endpoint = <&lcdc_out_vga>;
};
};
port@1 {
reg = <1>;
vga_bridge_out: endpoint {
remote-endpoint = <&vga_con_in>;
};
};
};
};
vga {
compatible = "vga-connector";
ddc-i2c-bus = <&i2c0>;
port {
vga_con_in: endpoint {
remote-endpoint = <&vga_bridge_out>;
};
};
};
};
&pmx_core {
status = "okay";
mcasp0_pins: pinmux_mcasp0_pins {
pinctrl-single,bits = <
/* AHCLKX AFSX ACLKX */
0x00 0x00101010 0x00f0f0f0
/* ARX13 ARX14 */
0x04 0x00000110 0x00000ff0
>;
};
nand_pins: nand_pins {
pinctrl-single,bits = <
/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
0x1c 0x10110010 0xf0ff00f0
/*
* EMA_D[0], EMA_D[1], EMA_D[2],
* EMA_D[3], EMA_D[4], EMA_D[5],
* EMA_D[6], EMA_D[7]
*/
0x24 0x11111111 0xffffffff
/*
* EMA_D[8], EMA_D[9], EMA_D[10],
* EMA_D[11], EMA_D[12], EMA_D[13],
* EMA_D[14], EMA_D[15]
*/
0x20 0x11111111 0xffffffff
/* EMA_A[1], EMA_A[2] */
0x30 0x01100000 0x0ff00000
>;
};
};
&serial2 {
pinctrl-names = "default";
pinctrl-0 = <&serial2_rxtx_pins>;
status = "okay";
};
&wdt {
status = "okay";
};
&rtc0 {
status = "okay";
};
&gpio {
status = "okay";
};
&sata {
status = "okay";
};
&mdio {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
bus_freq = <2200000>;
status = "okay";
};
&eth0 {
pinctrl-names = "default";
pinctrl-0 = <&mii_pins>;
status = "okay";
};
&mmc0 {
max-frequency = <50000000>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <100000>;
status = "okay";
tlv320aic3106: tlv320aic3106@18 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x18>;
status = "okay";
};
};
&mcasp0 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcasp0_pins>;
status = "okay";
op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
tdm-slots = <2>;
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 0 0
0 0 0 0
0 0 0 0
0 1 2 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&usb_phy {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
&aemif {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins>;
status = "okay";
cs3 {
#address-cells = <2>;
#size-cells = <1>;
clock-ranges;
ranges;
ti,cs-chipselect = <3>;
nand@2000000,0 {
compatible = "ti,davinci-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0x02000000 0x02000000
1 0x00000000 0x00008000>;
ti,davinci-chipselect = <1>;
ti,davinci-mask-ale = <0>;
ti,davinci-mask-cle = <0>;
ti,davinci-mask-chipsel = <0>;
ti,davinci-nand-buswidth = <16>;
ti,davinci-ecc-mode = "hw";
ti,davinci-ecc-bits = <4>;
ti,davinci-nand-use-bbt;
/*
* The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
* "To boot from NAND Flash, the AIS should be written
* to NAND block 1 (NAND block 0 is not used by default)".
* The same doc mentions that for ROM "Silicon Revision 2.1",
* "Updated NAND boot mode to offer boot from block 0 or block 1".
* However the limitaion is left here by default for compatibility
* with older silicon and because it needs new boot pin settings
* not possible in stock LCDK.
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot env";
reg = <0 0x020000>;
};
partition@0x020000 {
/* The LCDK defaults to booting from this partition */
label = "u-boot";
reg = <0x020000 0x080000>;
};
partition@0x0a0000 {
label = "free space";
reg = <0x0a0000 0>;
};
};
};
};
};
&prictrl {
status = "okay";
};
&memctrl {
status = "okay";
};
&lcdc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&lcd_pins>;
port {
lcdc_out_vga: endpoint {
remote-endpoint = <&vga_bridge_in>;
};
};
};
&vpif {
pinctrl-names = "default";
pinctrl-0 = <&vpif_capture_pins>;
status = "okay";
/* VPIF capture port */
port {
vpif_ch0: endpoint {
bus-width = <8>;
};
};
};