blob: 992442a03d8ba00d5ab7541b57074ebf3ec0a30d [file] [log] [blame]
/*
* DBAu1200/PBAu1200 board platform device registration
*
* Copyright (C) 2008-2011 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/smc91x.h>
#include <linux/ata_platform.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
#include <asm/mach-au1x00/au1200fb.h>
#include <asm/mach-au1x00/au1550_spi.h>
#include <asm/mach-db1x00/bcsr.h>
#include "platform.h"
#define BCSR_INT_IDE 0x0001
#define BCSR_INT_ETH 0x0002
#define BCSR_INT_PC0 0x0004
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
#define BCSR_INT_PC1INSERT 0x0400
#define BCSR_INT_PC1EJECT 0x0800
#define BCSR_INT_SD0INSERT 0x1000
#define BCSR_INT_SD0EJECT 0x2000
#define BCSR_INT_SD1INSERT 0x4000
#define BCSR_INT_SD1EJECT 0x8000
#define DB1200_IDE_PHYS_ADDR 0x18800000
#define DB1200_IDE_REG_SHIFT 5
#define DB1200_IDE_PHYS_LEN (16 << DB1200_IDE_REG_SHIFT)
#define DB1200_ETH_PHYS_ADDR 0x19000300
#define DB1200_NAND_PHYS_ADDR 0x20000000
#define PB1200_IDE_PHYS_ADDR 0x0C800000
#define PB1200_ETH_PHYS_ADDR 0x0D000300
#define PB1200_NAND_PHYS_ADDR 0x1C000000
#define DB1200_INT_BEGIN (AU1000_MAX_INTR + 1)
#define DB1200_IDE_INT (DB1200_INT_BEGIN + 0)
#define DB1200_ETH_INT (DB1200_INT_BEGIN + 1)
#define DB1200_PC0_INT (DB1200_INT_BEGIN + 2)
#define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3)
#define DB1200_PC1_INT (DB1200_INT_BEGIN + 4)
#define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5)
#define DB1200_DC_INT (DB1200_INT_BEGIN + 6)
#define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7)
#define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8)
#define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9)
#define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10)
#define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11)
#define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12)
#define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13)
#define PB1200_SD1_INSERT_INT (DB1200_INT_BEGIN + 14)
#define PB1200_SD1_EJECT_INT (DB1200_INT_BEGIN + 15)
#define DB1200_INT_END (DB1200_INT_BEGIN + 15)
const char *get_system_type(void);
static int __init db1200_detect_board(void)
{
int bid;
/* try the DB1200 first */
bcsr_init(DB1200_BCSR_PHYS_ADDR,
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
unsigned short t = bcsr_read(BCSR_HEXLEDS);
bcsr_write(BCSR_HEXLEDS, ~t);
if (bcsr_read(BCSR_HEXLEDS) != t) {
bcsr_write(BCSR_HEXLEDS, t);
return 0;
}
}
/* okay, try the PB1200 then */
bcsr_init(PB1200_BCSR_PHYS_ADDR,
PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
(bid == BCSR_WHOAMI_PB1200_DDR2)) {
unsigned short t = bcsr_read(BCSR_HEXLEDS);
bcsr_write(BCSR_HEXLEDS, ~t);
if (bcsr_read(BCSR_HEXLEDS) != t) {
bcsr_write(BCSR_HEXLEDS, t);
return 0;
}
}
return 1; /* it's neither */
}
int __init db1200_board_setup(void)
{
unsigned short whoami;
if (db1200_detect_board())
return -ENODEV;
whoami = bcsr_read(BCSR_WHOAMI);
switch (BCSR_WHOAMI_BOARD(whoami)) {
case BCSR_WHOAMI_PB1200_DDR1:
case BCSR_WHOAMI_PB1200_DDR2:
case BCSR_WHOAMI_DB1200:
break;
default:
return -ENODEV;
}
printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
" Board-ID %d Daughtercard ID %d\n", get_system_type(),
(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
return 0;
}
/******************************************************************************/
static struct mtd_partition db1200_spiflash_parts[] = {
{
.name = "spi_flash",
.offset = 0,
.size = MTDPART_SIZ_FULL,
},
};
static struct flash_platform_data db1200_spiflash_data = {
.name = "s25fl001",
.parts = db1200_spiflash_parts,
.nr_parts = ARRAY_SIZE(db1200_spiflash_parts),
.type = "m25p10",
};
static struct spi_board_info db1200_spi_devs[] __initdata = {
{
/* TI TMP121AIDBVR temp sensor */
.modalias = "tmp121",
.max_speed_hz = 2000000,
.bus_num = 0,
.chip_select = 0,
.mode = 0,
},
{
/* Spansion S25FL001D0FMA SPI flash */
.modalias = "m25p80",
.max_speed_hz = 50000000,
.bus_num = 0,
.chip_select = 1,
.mode = 0,
.platform_data = &db1200_spiflash_data,
},
};
static struct i2c_board_info db1200_i2c_devs[] __initdata = {
{ I2C_BOARD_INFO("24c04", 0x52), }, /* AT24C04-10 I2C eeprom */
{ I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
{ I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */
};
/**********************************************************************/
static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *this = mtd_to_nand(mtd);
unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
ioaddr &= 0xffffff00;
if (ctrl & NAND_CLE) {
ioaddr += MEM_STNAND_CMD;
} else if (ctrl & NAND_ALE) {
ioaddr += MEM_STNAND_ADDR;
} else {
/* assume we want to r/w real data by default */
ioaddr += MEM_STNAND_DATA;
}
this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
if (cmd != NAND_CMD_NONE) {
__raw_writeb(cmd, this->IO_ADDR_W);
wmb();
}
}
static int au1200_nand_device_ready(struct mtd_info *mtd)
{
return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
}
static struct mtd_partition db1200_nand_parts[] = {
{
.name = "NAND FS 0",
.offset = 0,
.size = 8 * 1024 * 1024,
},
{
.name = "NAND FS 1",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
},
};
struct platform_nand_data db1200_nand_platdata = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.nr_partitions = ARRAY_SIZE(db1200_nand_parts),
.partitions = db1200_nand_parts,
.chip_delay = 20,
},
.ctrl = {
.dev_ready = au1200_nand_device_ready,
.cmd_ctrl = au1200_nand_cmd_ctrl,
},
};
static struct resource db1200_nand_res[] = {
[0] = {
.start = DB1200_NAND_PHYS_ADDR,
.end = DB1200_NAND_PHYS_ADDR + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device db1200_nand_dev = {
.name = "gen_nand",
.num_resources = ARRAY_SIZE(db1200_nand_res),
.resource = db1200_nand_res,
.id = -1,
.dev = {
.platform_data = &db1200_nand_platdata,
}
};
/**********************************************************************/
static struct smc91x_platdata db1200_eth_data = {
.flags = SMC91X_NOWAIT | SMC91X_USE_16BIT,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct resource db1200_eth_res[] = {
[0] = {
.start = DB1200_ETH_PHYS_ADDR,
.end = DB1200_ETH_PHYS_ADDR + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DB1200_ETH_INT,
.end = DB1200_ETH_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device db1200_eth_dev = {
.dev = {
.platform_data = &db1200_eth_data,
},
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(db1200_eth_res),
.resource = db1200_eth_res,
};
/**********************************************************************/
static struct pata_platform_info db1200_ide_info = {
.ioport_shift = DB1200_IDE_REG_SHIFT,
};
#define IDE_ALT_START (14 << DB1200_IDE_REG_SHIFT)
static struct resource db1200_ide_res[] = {
[0] = {
.start = DB1200_IDE_PHYS_ADDR,
.end = DB1200_IDE_PHYS_ADDR + IDE_ALT_START - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DB1200_IDE_PHYS_ADDR + IDE_ALT_START,
.end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = DB1200_IDE_INT,
.end = DB1200_IDE_INT,
.flags = IORESOURCE_IRQ,
},
};
static u64 au1200_ide_dmamask = DMA_BIT_MASK(32);
static struct platform_device db1200_ide_dev = {
.name = "pata_platform",
.id = 0,
.dev = {
.dma_mask = &au1200_ide_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &db1200_ide_info,
},
.num_resources = ARRAY_SIZE(db1200_ide_res),
.resource = db1200_ide_res,
};
/**********************************************************************/
/* SD carddetects: they're supposed to be edge-triggered, but ack
* doesn't seem to work (CPLD Rev 2). Instead, the screaming one
* is disabled and its counterpart enabled. The 500ms timeout is
* because the carddetect isn't debounced in hardware.
*/
static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
{
void(*mmc_cd)(struct mmc_host *, unsigned long);
if (irq == DB1200_SD0_INSERT_INT) {
disable_irq_nosync(DB1200_SD0_INSERT_INT);
enable_irq(DB1200_SD0_EJECT_INT);
} else {
disable_irq_nosync(DB1200_SD0_EJECT_INT);
enable_irq(DB1200_SD0_INSERT_INT);
}
/* link against CONFIG_MMC=m */
mmc_cd = symbol_get(mmc_detect_change);
if (mmc_cd) {
mmc_cd(ptr, msecs_to_jiffies(500));
symbol_put(mmc_detect_change);
}
return IRQ_HANDLED;
}
static int db1200_mmc_cd_setup(void *mmc_host, int en)
{
int ret;
if (en) {
ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
0, "sd_insert", mmc_host);
if (ret)
goto out;
ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
0, "sd_eject", mmc_host);
if (ret) {
free_irq(DB1200_SD0_INSERT_INT, mmc_host);
goto out;
}
if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT)
enable_irq(DB1200_SD0_EJECT_INT);
else
enable_irq(DB1200_SD0_INSERT_INT);
} else {
free_irq(DB1200_SD0_INSERT_INT, mmc_host);
free_irq(DB1200_SD0_EJECT_INT, mmc_host);
}
ret = 0;
out:
return ret;
}
static void db1200_mmc_set_power(void *mmc_host, int state)
{
if (state) {
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
msleep(400); /* stabilization time */
} else
bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
}
static int db1200_mmc_card_readonly(void *mmc_host)
{
return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
}
static int db1200_mmc_card_inserted(void *mmc_host)
{
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
}
static void db1200_mmcled_set(struct led_classdev *led,
enum led_brightness brightness)
{
if (brightness != LED_OFF)
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
else
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
}
static struct led_classdev db1200_mmc_led = {
.brightness_set = db1200_mmcled_set,
};
/* -- */
static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
{
void(*mmc_cd)(struct mmc_host *, unsigned long);
if (irq == PB1200_SD1_INSERT_INT) {
disable_irq_nosync(PB1200_SD1_INSERT_INT);
enable_irq(PB1200_SD1_EJECT_INT);
} else {
disable_irq_nosync(PB1200_SD1_EJECT_INT);
enable_irq(PB1200_SD1_INSERT_INT);
}
/* link against CONFIG_MMC=m */
mmc_cd = symbol_get(mmc_detect_change);
if (mmc_cd) {
mmc_cd(ptr, msecs_to_jiffies(500));
symbol_put(mmc_detect_change);
}
return IRQ_HANDLED;
}
static int pb1200_mmc1_cd_setup(void *mmc_host, int en)
{
int ret;
if (en) {
ret = request_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, 0,
"sd1_insert", mmc_host);
if (ret)
goto out;
ret = request_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, 0,
"sd1_eject", mmc_host);
if (ret) {
free_irq(PB1200_SD1_INSERT_INT, mmc_host);
goto out;
}
if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT)
enable_irq(PB1200_SD1_EJECT_INT);
else
enable_irq(PB1200_SD1_INSERT_INT);
} else {
free_irq(PB1200_SD1_INSERT_INT, mmc_host);
free_irq(PB1200_SD1_EJECT_INT, mmc_host);
}
ret = 0;
out:
return ret;
}
static void pb1200_mmc1led_set(struct led_classdev *led,
enum led_brightness brightness)
{
if (brightness != LED_OFF)
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
else
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
}
static struct led_classdev pb1200_mmc1_led = {
.brightness_set = pb1200_mmc1led_set,
};
static void pb1200_mmc1_set_power(void *mmc_host, int state)
{
if (state) {
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
msleep(400); /* stabilization time */
} else
bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
}
static int pb1200_mmc1_card_readonly(void *mmc_host)
{
return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
}
static int pb1200_mmc1_card_inserted(void *mmc_host)
{
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
}
static struct au1xmmc_platform_data db1200_mmc_platdata[2] = {
[0] = {
.cd_setup = db1200_mmc_cd_setup,
.set_power = db1200_mmc_set_power,
.card_inserted = db1200_mmc_card_inserted,
.card_readonly = db1200_mmc_card_readonly,
.led = &db1200_mmc_led,
},
[1] = {
.cd_setup = pb1200_mmc1_cd_setup,
.set_power = pb1200_mmc1_set_power,
.card_inserted = pb1200_mmc1_card_inserted,
.card_readonly = pb1200_mmc1_card_readonly,
.led = &pb1200_mmc1_led,
},
};
static struct resource au1200_mmc0_resources[] = {
[0] = {
.start = AU1100_SD0_PHYS_ADDR,
.end = AU1100_SD0_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1200_SD_INT,
.end = AU1200_SD_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = AU1200_DSCR_CMD0_SDMS_TX0,
.end = AU1200_DSCR_CMD0_SDMS_TX0,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = AU1200_DSCR_CMD0_SDMS_RX0,
.end = AU1200_DSCR_CMD0_SDMS_RX0,
.flags = IORESOURCE_DMA,
}
};
static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
static struct platform_device db1200_mmc0_dev = {
.name = "au1xxx-mmc",
.id = 0,
.dev = {
.dma_mask = &au1xxx_mmc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &db1200_mmc_platdata[0],
},
.num_resources = ARRAY_SIZE(au1200_mmc0_resources),
.resource = au1200_mmc0_resources,
};
static struct resource au1200_mmc1_res[] = {
[0] = {
.start = AU1100_SD1_PHYS_ADDR,
.end = AU1100_SD1_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1200_SD_INT,
.end = AU1200_SD_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = AU1200_DSCR_CMD0_SDMS_TX1,
.end = AU1200_DSCR_CMD0_SDMS_TX1,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = AU1200_DSCR_CMD0_SDMS_RX1,
.end = AU1200_DSCR_CMD0_SDMS_RX1,
.flags = IORESOURCE_DMA,
}
};
static struct platform_device pb1200_mmc1_dev = {
.name = "au1xxx-mmc",
.id = 1,
.dev = {
.dma_mask = &au1xxx_mmc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &db1200_mmc_platdata[1],
},
.num_resources = ARRAY_SIZE(au1200_mmc1_res),
.resource = au1200_mmc1_res,
};
/**********************************************************************/
static int db1200fb_panel_index(void)
{
return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
}
static int db1200fb_panel_init(void)
{
/* Apply power */
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
BCSR_BOARD_LCDBL);
return 0;
}
static int db1200fb_panel_shutdown(void)
{
/* Remove power */
bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
BCSR_BOARD_LCDBL, 0);
return 0;
}
static struct au1200fb_platdata db1200fb_pd = {
.panel_index = db1200fb_panel_index,
.panel_init = db1200fb_panel_init,
.panel_shutdown = db1200fb_panel_shutdown,
};
static struct resource au1200_lcd_res[] = {
[0] = {
.start = AU1200_LCD_PHYS_ADDR,
.end = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1200_LCD_INT,
.end = AU1200_LCD_INT,
.flags = IORESOURCE_IRQ,
}
};
static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
static struct platform_device au1200_lcd_dev = {
.name = "au1200-lcd",
.id = 0,
.dev = {
.dma_mask = &au1200_lcd_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &db1200fb_pd,
},
.num_resources = ARRAY_SIZE(au1200_lcd_res),
.resource = au1200_lcd_res,
};
/**********************************************************************/
static struct resource au1200_psc0_res[] = {
[0] = {
.start = AU1550_PSC0_PHYS_ADDR,
.end = AU1550_PSC0_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1200_PSC0_INT,
.end = AU1200_PSC0_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = AU1200_DSCR_CMD0_PSC0_TX,
.end = AU1200_DSCR_CMD0_PSC0_TX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = AU1200_DSCR_CMD0_PSC0_RX,
.end = AU1200_DSCR_CMD0_PSC0_RX,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device db1200_i2c_dev = {
.name = "au1xpsc_smbus",
.id = 0, /* bus number */
.num_resources = ARRAY_SIZE(au1200_psc0_res),
.resource = au1200_psc0_res,
};
static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
{
if (cs)
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL);
else
bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0);
}
static struct au1550_spi_info db1200_spi_platdata = {
.mainclk_hz = 50000000, /* PSC0 clock */
.num_chipselect = 2,
.activate_cs = db1200_spi_cs_en,
};
static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct platform_device db1200_spi_dev = {
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &db1200_spi_platdata,
},
.name = "au1550-spi",
.id = 0, /* bus number */
.num_resources = ARRAY_SIZE(au1200_psc0_res),
.resource = au1200_psc0_res,
};
static struct resource au1200_psc1_res[] = {
[0] = {
.start = AU1550_PSC1_PHYS_ADDR,
.end = AU1550_PSC1_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1200_PSC1_INT,
.end = AU1200_PSC1_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = AU1200_DSCR_CMD0_PSC1_TX,
.end = AU1200_DSCR_CMD0_PSC1_TX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = AU1200_DSCR_CMD0_PSC1_RX,
.end = AU1200_DSCR_CMD0_PSC1_RX,
.flags = IORESOURCE_DMA,
},
};
/* AC97 or I2S device */
static struct platform_device db1200_audio_dev = {
/* name assigned later based on switch setting */
.id = 1, /* PSC ID */
.num_resources = ARRAY_SIZE(au1200_psc1_res),
.resource = au1200_psc1_res,
};
/* DB1200 ASoC card device */
static struct platform_device db1200_sound_dev = {
/* name assigned later based on switch setting */
.id = 1, /* PSC ID */
};
static struct platform_device db1200_stac_dev = {
.name = "ac97-codec",
.id = 1, /* on PSC1 */
};
static struct platform_device db1200_audiodma_dev = {
.name = "au1xpsc-pcm",
.id = 1, /* PSC ID */
};
static struct platform_device *db1200_devs[] __initdata = {
NULL, /* PSC0, selected by S6.8 */
&db1200_ide_dev,
&db1200_mmc0_dev,
&au1200_lcd_dev,
&db1200_eth_dev,
&db1200_nand_dev,
&db1200_audiodma_dev,
&db1200_audio_dev,
&db1200_stac_dev,
&db1200_sound_dev,
};
static struct platform_device *pb1200_devs[] __initdata = {
&pb1200_mmc1_dev,
};
/* Some peripheral base addresses differ on the PB1200 */
static int __init pb1200_res_fixup(void)
{
/* CPLD Revs earlier than 4 cause problems */
if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n");
printk(KERN_ERR "the board updated to latest revisions.\n");
printk(KERN_ERR "This software will not work reliably\n");
printk(KERN_ERR "on anything older than CPLD rev 4.!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
return 1;
}
db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff;
db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff;
return 0;
}
int __init db1200_dev_setup(void)
{
unsigned long pfc;
unsigned short sw;
int swapped, bid;
struct clk *c;
bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
(bid == BCSR_WHOAMI_PB1200_DDR2)) {
if (pb1200_res_fixup())
return -ENODEV;
}
/* GPIO7 is low-level triggered CPLD cascade */
irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
/* SMBus/SPI on PSC0, Audio on PSC1 */
pfc = alchemy_rdsys(AU1000_SYS_PINFUNC);
pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
/* get 50MHz for I2C driver on PSC0 */
c = clk_get(NULL, "psc0_intclk");
if (!IS_ERR(c)) {
pfc = clk_round_rate(c, 50000000);
if ((pfc < 1) || (abs(50000000 - pfc) > 2500000))
pr_warn("DB1200: cant get I2C close to 50MHz\n");
else
clk_set_rate(c, pfc);
clk_prepare_enable(c);
clk_put(c);
}
/* insert/eject pairs: one of both is always screaming. To avoid
* issues they must not be automatically enabled when initially
* requested.
*/
irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
i2c_register_board_info(0, db1200_i2c_devs,
ARRAY_SIZE(db1200_i2c_devs));
spi_register_board_info(db1200_spi_devs,
ARRAY_SIZE(db1200_i2c_devs));
/* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI)
* S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
* or S12 on the PB1200.
*/
/* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however
* this pin is claimed by PSC0 (unused though, but pinmux doesn't
* allow to free it without crippling the SPI interface).
* As a result, in SPI mode, OTG simply won't work (PSC0 uses
* it as an input pin which is pulled high on the boards).
*/
pfc = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
/* switch off OTG VBUS supply */
gpio_request(215, "otg-vbus");
gpio_direction_output(215, 1);
printk(KERN_INFO "%s device configuration:\n", get_system_type());
sw = bcsr_read(BCSR_SWITCHES);
if (sw & BCSR_SWITCHES_DIP_8) {
db1200_devs[0] = &db1200_i2c_dev;
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
pfc |= (2 << 17); /* GPIO2 block owns GPIO215 */
printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
printk(KERN_INFO " OTG port VBUS supply available!\n");
} else {
db1200_devs[0] = &db1200_spi_dev;
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX);
pfc |= (1 << 17); /* PSC0 owns GPIO215 */
printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
printk(KERN_INFO " OTG port VBUS supply disabled\n");
}
alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
/* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
* so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
*/
sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7;
if (sw == BCSR_SWITCHES_DIP_8) {
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
db1200_audio_dev.name = "au1xpsc_i2s";
db1200_sound_dev.name = "db1200-i2s";
printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
} else {
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
db1200_audio_dev.name = "au1xpsc_ac97";
db1200_sound_dev.name = "db1200-ac97";
printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
}
/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
__raw_writel(PSC_SEL_CLK_SERCLK,
(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
wmb();
db1x_register_pcmcia_socket(
AU1000_PCMCIA_ATTR_PHYS_ADDR,
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
AU1000_PCMCIA_MEM_PHYS_ADDR,
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
AU1000_PCMCIA_IO_PHYS_ADDR,
AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
DB1200_PC0_INT, DB1200_PC0_INSERT_INT,
/*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0);
db1x_register_pcmcia_socket(
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000,
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000,
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
DB1200_PC1_INT, DB1200_PC1_INSERT_INT,
/*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
db1x_register_norflash(64 << 20, 2, swapped);
platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
/* PB1200 is a DB1200 with a 2nd MMC and Camera connector */
if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
(bid == BCSR_WHOAMI_PB1200_DDR2))
platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs));
return 0;
}