blob: 1c5e6f17a1df74833f6e4f1571863cf8e716e5ca [file] [log] [blame]
* AMS/TAOS ALS and proximity sensor
Required properties:
- compatible: Should be one of
"amstaos,tsl2571"
"amstaos,tsl2671"
"amstaos,tmd2671"
"amstaos,tsl2771"
"amstaos,tmd2771"
"amstaos,tsl2572"
"amstaos,tsl2672"
"amstaos,tmd2672"
"amstaos,tsl2772"
"amstaos,tmd2772"
"avago,apds9930"
- reg: the I2C address of the device
Optional properties:
- amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1>
are the only valid values.
- led-max-microamp - current for the proximity LED. Must be 100000, 50000,
25000, or 13000.
- vdd-supply: phandle to the regulator that provides power to the sensor.
- vddio-supply: phandle to the regulator that provides power to the bus.
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
node bindings.
Example:
tsl2772@39 {
compatible = "amstaos,tsl2772";
reg = <0x39>;
interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8941_l17>;
vddio-supply = <&pm8941_lvs1>;
amstaos,proximity-diodes = <0>;
led-max-microamp = <100000>;
};