Merge tag 'dmaengine-fix-4.2-rc5' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
 "We had a regression due to reuse of descriptor so we have reverted
  that.

  The rest are driver fixes:

   - at_hdmac and at_xdmac for residue, trannfer width, and channel config
   - pl330 final fix for dma fails and overflow issue
   - xgene resouce map fix
   - mv_xor big endian op fix"

* tag 'dmaengine-fix-4.2-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  Revert "dmaengine: virt-dma: don't always free descriptor upon completion"
  dmaengine: mv_xor: fix big endian operation in register mode
  dmaengine: xgene-dma: Fix the resource map to handle overlapping
  dmaengine: at_xdmac: fix transfer data width in at_xdmac_prep_slave_sg()
  dmaengine: at_hdmac: fix residue computation
  dmaengine: at_xdmac: fix bug about channel configuration
  dmaengine: pl330: Really fix choppy sound because of wrong residue calculation
  dmaengine: pl330: Fix overflow when reporting residue in memcpy
diff --git a/.mailmap b/.mailmap
index 977f958..b4091b7 100644
--- a/.mailmap
+++ b/.mailmap
@@ -116,6 +116,7 @@
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>
+Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
 Sumit Semwal <sumit.semwal@ti.com>
 Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
@@ -125,7 +126,9 @@
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
-Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index bbed111..70c9b1a 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1234,10 +1234,8 @@
 		object is near the sensor, usually be observing
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
-		to SI units is not possible.  Where it is, the units should
-		be meters.  If such a conversion is not possible, the reported
-		values should behave in the same way as a distance, i.e. lower
-		values indicate something is closer to the sensor.
+		to SI units is not possible. Higher proximity measurements
+		indicate closer objects, and vice versa.
 
 What:		/sys/.../iio:deviceX/in_illuminance_input
 What:		/sys/.../iio:deviceX/in_illuminance_raw
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index c0312cb..2fb9a54 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -3383,7 +3383,7 @@
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="2" valign="top" >omap</td>
+	<td valign="top" >omap</td>
 	<td valign="top" >Generic</td>
 	<td valign="top" >“zorder”</td>
 	<td valign="top" >RANGE</td>
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 65610bf5..1b049be 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -60,4 +60,4 @@
   Document Author
   ---------------
 
-  Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
+  Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index 1fe2d7f..5e38e158 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -36,7 +36,7 @@
         + User Manual
           http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
 
-      - Allwinner A23
+      - Allwinner A23 (sun8i)
         + Datasheet
           http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
         + User Manual
@@ -55,7 +55,23 @@
         + User Manual
           http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
 
+      - Allwinner A33 (sun8i)
+        + Datasheet
+          http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf
+        + User Manual
+          http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
+
+      - Allwinner H3 (sun8i)
+        + Datasheet
+          http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
+
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80
         + Datasheet
 	  http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
+
+    * Octa ARM Cortex-A7 based SoCs
+      - Allwinner A83T
+        + Not Supported
+        + Datasheet
+          http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index 82960cf..785eab8 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -258,6 +258,12 @@
 	no further I/O will be permitted and the status will just
 	contain the string 'Fail'.  The userspace recovery tools
 	should then be used.
+needs_check		 : 'needs_check' if set, '-' if not set
+	A metadata operation has failed, resulting in the needs_check
+	flag being set in the metadata's superblock.  The metadata
+	device must be deactivated and checked/repaired before the
+	cache can be made fully operational again.  '-' indicates
+	needs_check is not set.
 
 Messages
 --------
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index 4f67578..1699a55 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -296,7 +296,7 @@
 	underlying device.  When this is enabled when loading the table,
 	it can get disabled if the underlying device doesn't support it.
 
-    ro|rw
+    ro|rw|out_of_data_space
 	If the pool encounters certain types of device failures it will
 	drop into a read-only metadata mode in which no changes to
 	the pool metadata (like allocating new blocks) are permitted.
@@ -314,6 +314,13 @@
 	module parameter can be used to change this timeout -- it
 	defaults to 60 seconds but may be disabled using a value of 0.
 
+    needs_check
+	A metadata operation has failed, resulting in the needs_check
+	flag being set in the metadata's superblock.  The metadata
+	device must be deactivated and checked/repaired before the
+	thin-pool can be made fully operational again.  '-' indicates
+	needs_check is not set.
+
 iii) Messages
 
     create_thin <dev id>
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index 42941fd..67da205 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -9,4 +9,6 @@
   allwinner,sun6i-a31
   allwinner,sun7i-a20
   allwinner,sun8i-a23
+  allwinner,sun8i-a33
+  allwinner,sun8i-h3
   allwinner,sun9i-a80
diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
index e75f0e5..971c3ee 100644
--- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
@@ -65,8 +65,10 @@
 - edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel
-- port: A port node with endpoint definitions as defined in
+- port@[0-1]: Port nodes with endpoint definitions as defined in
   Documentation/devicetree/bindings/media/video-interfaces.txt.
+  Port 0 is the input port connected to the IPU display interface,
+  port 1 is the output port connected to a panel.
 
 example:
 
@@ -75,9 +77,29 @@
 	edid = [edid-data];
 	interface-pix-fmt = "rgb24";
 
-	port {
+	port@0 {
+		reg = <0>;
+
 		display_in: endpoint {
 			remote-endpoint = <&ipu_di0_disp0>;
 		};
 	};
+
+	port@1 {
+		reg = <1>;
+
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+panel {
+	...
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&display_out>;
+		};
+	};
 };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
index c03eec1..3443e0f 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
@@ -35,3 +35,6 @@
 
                       NOTE: this only applies to the SMMU itself, not
                       masters connected upstream of the SMMU.
+
+- hisilicon,broken-prefetch-cmd
+                    : Avoid sending CMD_PREFETCH_* commands to the SMMU.
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
index 938f8e1..0db6047 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -8,6 +8,7 @@
 Required properties:
 - compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
   is the IP revision of the specific EMIF instance.
+		  For am437x should be ti,emif-am4372.
 
 - phy-type	: <u32> indicating the DDR phy type. Following are the
   allowed values
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index 5d0376b..211e778 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -17,7 +17,6 @@
 	       "fsl,imx6sx-usdhc"
 
 Optional properties:
-- fsl,cd-controller : Indicate to use controller internal card detection
 - fsl,wp-controller : Indicate to use controller internal write protection
 - fsl,delay-line : Specify the number of delay cells for override mode.
   This is used to set the clock delay for DLL(Delay Line) on override mode
@@ -35,7 +34,6 @@
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-controller;
 	fsl,wp-controller;
 };
 
diff --git a/Documentation/devicetree/bindings/sound/mt8173-max98090.txt b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt
index 829bd26..519e97c 100644
--- a/Documentation/devicetree/bindings/sound/mt8173-max98090.txt
+++ b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt
@@ -3,11 +3,13 @@
 Required properties:
 - compatible : "mediatek,mt8173-max98090"
 - mediatek,audio-codec: the phandle of the MAX98090 audio codec
+- mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-max98090";
 		mediatek,audio-codec = <&max98090>;
+		mediatek,platform = <&afe>;
 	};
 
diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt
index 61e98c9..f205ce9 100644
--- a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt
+++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt
@@ -3,11 +3,13 @@
 Required properties:
 - compatible : "mediatek,mt8173-rt5650-rt5676"
 - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs
+- mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-rt5650-rt5676";
 		mediatek,audio-codec = <&rt5650 &rt5676>;
+		mediatek,platform = <&afe>;
 	};
 
diff --git a/Documentation/devicetree/bindings/spi/spi-ath79.txt b/Documentation/devicetree/bindings/spi/spi-ath79.txt
index f1ad9c3..9c696fa 100644
--- a/Documentation/devicetree/bindings/spi/spi-ath79.txt
+++ b/Documentation/devicetree/bindings/spi/spi-ath79.txt
@@ -3,7 +3,7 @@
 Required properties:
 - compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
 - reg: Base address and size of the controllers memory area
-- clocks: phandle to the AHB clock.
+- clocks: phandle of the AHB clock.
 - clock-names: has to be "ahb".
 - #address-cells: <1>, as required by generic SPI binding.
 - #size-cells: <0>, also as required by generic SPI binding.
@@ -12,9 +12,9 @@
 
 Example:
 
-	spi@1F000000 {
+	spi@1f000000 {
 		compatible = "qca,ar9132-spi", "qca,ar7100-spi";
-		reg = <0x1F000000 0x10>;
+		reg = <0x1f000000 0x10>;
 
 		clocks = <&pll 2>;
 		clock-names = "ahb";
diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904
index 014f112..57fffe3 100644
--- a/Documentation/hwmon/nct7904
+++ b/Documentation/hwmon/nct7904
@@ -35,11 +35,11 @@
 temp[2-9]_input		CPU temperatures (1/1000 degree,
 			0.125 degree resolution)
 
-fan[1-4]_mode		R/W, 0/1 for manual or SmartFan mode
+pwm[1-4]_enable		R/W, 1/2 for manual or SmartFan mode
 			Setting SmartFan mode is supported only if it has been
 			previously configured by BIOS (or configuration EEPROM)
 
-fan[1-4]_pwm		R/O in SmartFan mode, R/W in manual control mode
+pwm[1-4]		R/O in SmartFan mode, R/W in manual control mode
 
 The driver checks sensor control registers and does not export the sensors
 that are not enabled. Anyway, a sensor that is enabled may actually be not
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index e63b446..13f888a 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -952,6 +952,14 @@
 	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
 	mode) if this option is supported by $(AR).
 
+    ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS   Overrides the kbuild defaults
+
+	These variables are appended to the KBUILD_CPPFLAGS,
+	KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the
+	top-level Makefile has set any other flags. This provides a
+	means for an architecture to override the defaults.
+
+
 --- 6.2 Add prerequisites to archheaders:
 
 	The archheaders: rule is used to generate header files that
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index f732a83..8cc17ca 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -410,8 +410,17 @@
 
 Q: Can I suspend-to-disk using a swap partition under LVM?
 
-A: No. You can suspend successfully, but you'll not be able to
-resume. uswsusp should be able to work with LVM. See suspend.sf.net.
+A: Yes and No.  You can suspend successfully, but the kernel will not be able
+to resume on its own.  You need an initramfs that can recognize the resume
+situation, activate the logical volume containing the swap volume (but not
+touch any filesystems!), and eventually call
+
+echo -n "$major:$minor" > /sys/power/resume
+
+where $major and $minor are the respective major and minor device numbers of
+the swap volume.
+
+uswsusp works with LVM, too.  See http://suspend.sourceforge.net/
 
 Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
 compiled with the similar configuration files. Anyway I found that
diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py
index 949de19..cda56df 100755
--- a/Documentation/target/tcm_mod_builder.py
+++ b/Documentation/target/tcm_mod_builder.py
@@ -199,7 +199,8 @@
 	buf += "#include <linux/string.h>\n"
 	buf += "#include <linux/configfs.h>\n"
 	buf += "#include <linux/ctype.h>\n"
-	buf += "#include <asm/unaligned.h>\n\n"
+	buf += "#include <asm/unaligned.h>\n"
+	buf += "#include <scsi/scsi_proto.h>\n\n"
 	buf += "#include <target/target_core_base.h>\n"
 	buf += "#include <target/target_core_fabric.h>\n"
 	buf += "#include <target/target_core_fabric_configfs.h>\n"
@@ -230,8 +231,14 @@
 	buf += "	}\n"
 	buf += "	tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n"
 	buf += "	tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n"
-	buf += "	ret = core_tpg_register(&" + fabric_mod_name + "_ops, wwn,\n"
-	buf += "				&tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+
+	if proto_ident == "FC":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);\n"
+	elif proto_ident == "SAS":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+	elif proto_ident == "iSCSI":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_ISCSI);\n"
+
 	buf += "	if (ret < 0) {\n"
 	buf += "		kfree(tpg);\n"
 	buf += "		return NULL;\n"
@@ -292,7 +299,7 @@
 
 	buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n"
 	buf += "	.module				= THIS_MODULE,\n"
-	buf += "	.name				= " + fabric_mod_name + ",\n"
+	buf += "	.name				= \"" + fabric_mod_name + "\",\n"
 	buf += "	.get_fabric_name		= " + fabric_mod_name + "_get_fabric_name,\n"
 	buf += "	.tpg_get_wwn			= " + fabric_mod_name + "_get_fabric_wwn,\n"
 	buf += "	.tpg_get_tag			= " + fabric_mod_name + "_get_tag,\n"
@@ -322,17 +329,17 @@
 	buf += "	.fabric_make_tpg		= " + fabric_mod_name + "_make_tpg,\n"
 	buf += "	.fabric_drop_tpg		= " + fabric_mod_name + "_drop_tpg,\n"
 	buf += "\n"
-	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs;\n"
+	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs,\n"
 	buf += "};\n\n"
 
 	buf += "static int __init " + fabric_mod_name + "_init(void)\n"
 	buf += "{\n"
-	buf += "	return target_register_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	return target_register_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "static void __exit " + fabric_mod_name + "_exit(void)\n"
 	buf += "{\n"
-	buf += "	target_unregister_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	target_unregister_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n"
diff --git a/MAINTAINERS b/MAINTAINERS
index 8133cef..a9ae6c1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -361,11 +361,11 @@
 F:	drivers/input/touchscreen/ad7879.c
 
 ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 S:	Maintained
 
 ADM1025 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/adm1025
@@ -430,7 +430,7 @@
 F:	drivers/macintosh/therm_adt746x.c
 
 ADT7475 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/adt7475
@@ -445,7 +445,7 @@
 
 ADVANSYS SCSI DRIVER
 M:	Matthew Wilcox <matthew@wil.cx>
-M:	Hannes Reinecke <hare@suse.de>
+M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/advansys.txt
@@ -506,7 +506,7 @@
 F:	drivers/scsi/pcmcia/aha152x*
 
 AIC7XXX / AIC79XX SCSI DRIVER
-M:	Hannes Reinecke <hare@suse.de>
+M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aic7xxx/
@@ -746,7 +746,7 @@
 F:	sound/aoa/
 
 APM DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 S:	Odd fixes
 F:	arch/x86/kernel/apm_32.c
 F:	include/linux/apm_bios.h
@@ -1001,6 +1001,7 @@
 M:	Baruch Siach <baruch@tkos.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	arch/arm/boot/dts/cx92755*
 N:	digicolor
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -1324,7 +1325,7 @@
 F:	arch/arm/mach-pxa/palmtc.c
 
 ARM/PALM TREO SUPPORT
-M:	Tomas Cech <sleep_walker@suse.cz>
+M:	Tomas Cech <sleep_walker@suse.com>
 L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
@@ -1614,6 +1615,7 @@
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/vexpress*
+F:	arch/arm64/boot/dts/arm/vexpress*
 F:	arch/arm/mach-vexpress/
 F:	*/*/vexpress*
 F:	*/*/*/vexpress*
@@ -2404,7 +2406,7 @@
 BTRFS FILE SYSTEM
 M:	Chris Mason <clm@fb.com>
 M:	Josef Bacik <jbacik@fb.com>
-M:	David Sterba <dsterba@suse.cz>
+M:	David Sterba <dsterba@suse.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
@@ -2562,19 +2564,31 @@
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
-CEPH DISTRIBUTED FILE SYSTEM CLIENT
+CEPH COMMON CODE (LIBCEPH)
+M:	Ilya Dryomov <idryomov@gmail.com>
 M:	"Yan, Zheng" <zyan@redhat.com>
 M:	Sage Weil <sage@redhat.com>
 L:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
 S:	Supported
-F:	Documentation/filesystems/ceph.txt
-F:	fs/ceph/
 F:	net/ceph/
 F:	include/linux/ceph/
 F:	include/linux/crush/
 
+CEPH DISTRIBUTED FILE SYSTEM CLIENT (CEPH)
+M:	"Yan, Zheng" <zyan@redhat.com>
+M:	Sage Weil <sage@redhat.com>
+M:	Ilya Dryomov <idryomov@gmail.com>
+L:	ceph-devel@vger.kernel.org
+W:	http://ceph.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
+S:	Supported
+F:	Documentation/filesystems/ceph.txt
+F:	fs/ceph/
+
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 L:	linux-usb@vger.kernel.org
 S:	Orphan
@@ -2735,7 +2749,7 @@
 M:	Julia Lawall <Julia.Lawall@lip6.fr>
 M:	Gilles Muller <Gilles.Muller@lip6.fr>
 M:	Nicolas Palix <nicolas.palix@imag.fr>
-M:	Michal Marek <mmarek@suse.cz>
+M:	Michal Marek <mmarek@suse.com>
 L:	cocci@systeme.lip6.fr (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
 W:	http://coccinelle.lip6.fr/
@@ -2851,7 +2865,7 @@
 
 CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
 M:	Johannes Weiner <hannes@cmpxchg.org>
-M:	Michal Hocko <mhocko@suse.cz>
+M:	Michal Hocko <mhocko@kernel.org>
 L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
@@ -2932,7 +2946,7 @@
 F:	arch/x86/kernel/msr.c
 
 CPU POWER MONITORING SUBSYSTEM
-M:	Thomas Renninger <trenn@suse.de>
+M:	Thomas Renninger <trenn@suse.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	tools/power/cpupower/
@@ -3162,7 +3176,7 @@
 F:	drivers/net/ethernet/dec/tulip/dmfe.c
 
 DC390/AM53C974 SCSI driver
-M:	Hannes Reinecke <hare@suse.de>
+M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/am53c974.c
@@ -3366,7 +3380,7 @@
 S:	Maintained
 
 DISKQUOTA
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 S:	Maintained
 F:	Documentation/filesystems/quota.txt
 F:	fs/quota/
@@ -3422,7 +3436,7 @@
 F:	drivers/hwmon/dme1737.c
 
 DMI/SMBIOS SUPPORT
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 S:	Maintained
 T:	quilt http://jdelvare.nerim.net/devel/linux/jdelvare-dmi/
 F:	Documentation/ABI/testing/sysfs-firmware-dmi-tables
@@ -4038,7 +4052,7 @@
 F:	drivers/of/of_net.c
 
 EXT2 FILE SYSTEM
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext2.txt
@@ -4046,7 +4060,7 @@
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	Andreas Dilger <adilger.kernel@dilger.ca>
 L:	linux-ext4@vger.kernel.org
@@ -4096,7 +4110,7 @@
 F:	include/video/exynos_mipi*
 
 F71805F HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/f71805f
@@ -4231,7 +4245,7 @@
 F:	drivers/block/rsxx/
 
 FLOPPY DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
 S:	Odd fixes
 F:	drivers/block/floppy.c
@@ -4652,7 +4666,7 @@
 
 H8/300 ARCHITECTURE
 M:	Yoshinori Sato <ysato@users.sourceforge.jp>
-L:	uclinux-h8-devel@lists.sourceforge.jp
+L:	uclinux-h8-devel@lists.sourceforge.jp (moderated for non-subscribers)
 W:	http://uclinux-h8.sourceforge.jp
 T:	git git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git
 S:	Maintained
@@ -4699,7 +4713,7 @@
 F:	drivers/media/usb/hackrf/
 
 HARDWARE MONITORING
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
@@ -4802,7 +4816,7 @@
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -4811,7 +4825,7 @@
 F:	include/uapi/linux/hid*
 
 HID SENSOR HUB DRIVERS
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 M:	Jonathan Cameron <jic23@kernel.org>
 M:	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
 L:	linux-input@vger.kernel.org
@@ -4945,7 +4959,7 @@
 F:	tools/hv/
 
 I2C OVER PARALLEL PORT
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-parport
@@ -4954,7 +4968,7 @@
 F:	drivers/i2c/busses/i2c-parport-light.c
 
 I2C/SMBUS CONTROLLER DRIVERS FOR PC
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ali1535
@@ -4995,7 +5009,7 @@
 F:	Documentation/i2c/busses/i2c-ismt
 
 I2C/SMBUS STUB DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-stub.c
@@ -5022,7 +5036,7 @@
 S:	Maintained
 
 I2C-TAOS-EVM DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-taos-evm
@@ -5551,8 +5565,8 @@
 F:	net/netfilter/ipvs/
 
 IPWIRELESS DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
-M:	David Sterba <dsterba@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
+M:	David Sterba <dsterba@suse.com>
 S:	Odd Fixes
 F:	drivers/tty/ipwireless/
 
@@ -5586,6 +5600,7 @@
 IRQCHIP DRIVERS
 M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Jason Cooper <jason@lakedaemon.net>
+M:	Marc Zyngier <marc.zyngier@arm.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
@@ -5594,11 +5609,14 @@
 F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
-M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M:	Jiang Liu <jiang.liu@linux.intel.com>
+M:	Marc Zyngier <marc.zyngier@arm.com>
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	Documentation/IRQ-domain.txt
 F:	include/linux/irqdomain.h
 F:	kernel/irq/irqdomain.c
+F:	kernel/irq/msi.c
 
 ISAPNP
 M:	Jaroslav Kysela <perex@perex.cz>
@@ -5672,7 +5690,7 @@
 F:	drivers/isdn/hardware/eicon/
 
 IT87 HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/it87
@@ -5739,7 +5757,7 @@
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
 M:	Andrew Morton <akpm@linux-foundation.org>
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	fs/jbd/
@@ -5803,7 +5821,7 @@
 F:	fs/autofs4/
 
 KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
-M:	Michal Marek <mmarek@suse.cz>
+M:	Michal Marek <mmarek@suse.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git for-next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git rc-fixes
 L:	linux-kbuild@vger.kernel.org
@@ -5867,7 +5885,7 @@
 F:	arch/x86/kvm/svm.c
 
 KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-M:	Alexander Graf <agraf@suse.de>
+M:	Alexander Graf <agraf@suse.com>
 L:	kvm-ppc@vger.kernel.org
 W:	http://kvm.qumranet.com
 T:	git git://github.com/agraf/linux-2.6.git
@@ -5885,7 +5903,6 @@
 F:	Documentation/s390/kvm.txt
 F:	arch/s390/include/asm/kvm*
 F:	arch/s390/kvm/
-F:	drivers/s390/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR ARM
 M:	Christoffer Dall <christoffer.dall@linaro.org>
@@ -6024,7 +6041,7 @@
 F:	include/linux/leds.h
 
 LEGACY EEPROM DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 S:	Maintained
 F:	Documentation/misc-devices/eeprom
 F:	drivers/misc/eeprom/eeprom.c
@@ -6077,7 +6094,7 @@
 F:	include/linux/libata.h
 
 LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	linux-ide@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
 S:	Maintained
@@ -6147,6 +6164,7 @@
 Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
 F:	drivers/nvdimm/pmem.c
+F:	include/linux/pmem.h
 
 LINUX FOR IBM pSERIES (RS/6000)
 M:	Paul Mackerras <paulus@au.ibm.com>
@@ -6161,7 +6179,7 @@
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@lists.ozlabs.org
 Q:	http://patchwork.ozlabs.org/project/linuxppc-dev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git
 S:	Supported
 F:	Documentation/powerpc/
 F:	arch/powerpc/
@@ -6237,8 +6255,8 @@
 LIVE PATCHING
 M:	Josh Poimboeuf <jpoimboe@redhat.com>
 M:	Seth Jennings <sjenning@redhat.com>
-M:	Jiri Kosina <jkosina@suse.cz>
-M:	Vojtech Pavlik <vojtech@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
+M:	Vojtech Pavlik <vojtech@suse.com>
 S:	Maintained
 F:	kernel/livepatch/
 F:	include/linux/livepatch.h
@@ -6264,21 +6282,21 @@
 F:	drivers/hwmon/lm73.c
 
 LM78 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm78
 F:	drivers/hwmon/lm78.c
 
 LM83 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm83
 F:	drivers/hwmon/lm83.c
 
 LM90 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm90
@@ -6824,6 +6842,12 @@
 S:	Maintained
 F:	drivers/media/usb/msi2500/
 
+MSYSTEMS DISKONCHIP G3 MTD DRIVER
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/devices/docg3*
+
 MT9M032 APTINA SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
@@ -7005,6 +7029,7 @@
 F:	net/*/netfilter.c
 F:	net/*/netfilter/
 F:	net/netfilter/
+F:	net/bridge/br_netfilter*.c
 
 NETLABEL
 M:	Paul Moore <paul@paul-moore.com>
@@ -7704,7 +7729,7 @@
 F:	drivers/char/pc8736x_gpio.c
 
 PC87427 HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/pc87427
@@ -7981,7 +8006,7 @@
 F:	drivers/pinctrl/samsung/
 
 PIN CONTROLLER - ST SPEAR
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -7989,7 +8014,7 @@
 F:	drivers/pinctrl/spear/
 
 PKTCDVD DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
@@ -8366,10 +8391,12 @@
 M:	Ilya Dryomov <idryomov@gmail.com>
 M:	Sage Weil <sage@redhat.com>
 M:	Alex Elder <elder@kernel.org>
-M:	ceph-devel@vger.kernel.org
+L:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
 S:	Supported
+F:	Documentation/ABI/testing/sysfs-bus-rbd
 F:	drivers/block/rbd.c
 F:	drivers/block/rbd_types.h
 
@@ -8878,7 +8905,7 @@
 F:	drivers/tty/serial/
 
 SYNOPSYS DESIGNWARE DMAC DRIVER
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 S:	Maintained
 F:	include/linux/dma/dw.h
@@ -9045,7 +9072,7 @@
 F:	drivers/mmc/host/sdhci-s3c*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
@@ -9407,7 +9434,7 @@
 F:	drivers/hwmon/sch5627.c
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397
@@ -9456,7 +9483,7 @@
 F:	drivers/media/pci/solo6x10/
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-M:	Neil Brown <neilb@suse.de>
+M:	Neil Brown <neilb@suse.com>
 L:	linux-raid@vger.kernel.org
 S:	Supported
 F:	drivers/md/
@@ -9499,7 +9526,7 @@
 
 SOUND
 M:	Jaroslav Kysela <perex@perex.cz>
-M:	Takashi Iwai <tiwai@suse.de>
+M:	Takashi Iwai <tiwai@suse.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://www.alsa-project.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
@@ -9583,7 +9610,7 @@
 F:	include/linux/compiler.h
 
 SPEAR PLATFORM SUPPORT
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 M:	Shiraz Hashim <shiraz.linux.kernel@gmail.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -9592,7 +9619,7 @@
 F:	arch/arm/mach-spear/
 
 SPEAR CLOCK FRAMEWORK SUPPORT
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -10382,7 +10409,7 @@
 
 TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-M:	Jiri Slaby <jslaby@suse.cz>
+M:	Jiri Slaby <jslaby@suse.com>
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
 F:	Documentation/serial/
@@ -10456,7 +10483,7 @@
 F:	arch/m68k/include/asm/*_no.*
 
 UDF FILESYSTEM
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 S:	Maintained
 F:	Documentation/filesystems/udf.txt
 F:	fs/udf/
@@ -10599,7 +10626,7 @@
 F:	include/linux/usb/gadget*
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -10724,7 +10751,7 @@
 F:	drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-M:	Oliver Neukum <oneukum@suse.de>
+M:	Oliver Neukum <oneukum@suse.com>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
@@ -10878,6 +10905,15 @@
 F:	include/linux/virtio_*.h
 F:	include/uapi/linux/virtio_*.h
 
+VIRTIO DRIVERS FOR S390
+M:	Christian Borntraeger <borntraeger@de.ibm.com>
+M:	Cornelia Huck <cornelia.huck@de.ibm.com>
+L:	linux-s390@vger.kernel.org
+L:	virtualization@lists.linux-foundation.org
+L:	kvm@vger.kernel.org
+S:	Supported
+F:	drivers/s390/virtio/
+
 VIRTIO GPU DRIVER
 M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>
@@ -11051,7 +11087,7 @@
 F:	drivers/hwmon/w83793.c
 
 W83795 HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/w83795.c
diff --git a/Makefile b/Makefile
index 13270c0..afabc44 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*
@@ -780,10 +780,11 @@
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 
-# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
-KBUILD_CPPFLAGS += $(KCPPFLAGS)
-KBUILD_AFLAGS += $(KAFLAGS)
-KBUILD_CFLAGS += $(KCFLAGS)
+# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
+# last assignments
+KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
+KBUILD_AFLAGS   += $(ARCH_AFLAGS)   $(KAFLAGS)
+KBUILD_CFLAGS   += $(ARCH_CFLAGS)   $(KCFLAGS)
 
 # Use --build-id when available.
 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
diff --git a/arch/Kconfig b/arch/Kconfig
index bec6666..8a8ea71 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -221,6 +221,10 @@
 config ARCH_THREAD_INFO_ALLOCATOR
 	bool
 
+# Select if arch wants to size task_struct dynamically via arch_task_struct_size:
+config ARCH_WANTS_DYNAMIC_TASK_STRUCT
+	bool
+
 config HAVE_REGS_AND_STACK_ACCESS_API
 	bool
 	help
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index cde23cd..ffd9cf5 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -5,6 +5,7 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += sections.h
 generic-y += trace_clock.h
diff --git a/arch/alpha/include/asm/mm-arch-hooks.h b/arch/alpha/include/asm/mm-arch-hooks.h
deleted file mode 100644
index b07fd86..0000000
--- a/arch/alpha/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ALPHA_MM_ARCH_HOOKS_H
-#define _ASM_ALPHA_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ALPHA_MM_ARCH_HOOKS_H */
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index e7cee0a..91cf405 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -115,6 +115,7 @@
 
 config ARC_CPU_750D
 	bool "ARC750D"
+	select ARC_CANT_LLSC
 	help
 	  Support for ARC750 core
 
@@ -362,7 +363,7 @@
 config ARC_HAS_LLSC
 	bool "Insn: LLOCK/SCOND (efficient atomic ops)"
 	default y
-	depends on !ARC_CPU_750D && !ARC_CANT_LLSC
+	depends on !ARC_CANT_LLSC
 
 config ARC_HAS_SWAPE
 	bool "Insn: SWAPE (endian-swap)"
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 6107062..46d8731 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -49,7 +49,8 @@
 
 ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 # Generic build system uses -O2, we want -O3
-cflags-y  += -O3
+# Note: No need to add to cflags-y as that happens anyways
+ARCH_CFLAGS += -O3
 endif
 
 # small data is default for elf32 tool-chain. If not usable, disable it
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index 15c8d62..1cd5e82 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -12,7 +12,7 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <75000000>;
+	clock-frequency = <90000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 199d428..2f0b332 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -12,7 +12,7 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <75000000>;
+	clock-frequency = <90000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index 1a80cc9..7611b10 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -22,6 +22,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += param.h
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 99fe118..57c1f33 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -50,8 +50,7 @@
 	 * done for const @nr, but no code is generated due to gcc	\
 	 * const prop.							\
 	 */								\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
+	nr &= 0x1f;							\
 									\
 	__asm__ __volatile__(						\
 	"1:	llock       %0, [%1]		\n"			\
@@ -82,8 +81,7 @@
 									\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
+	nr &= 0x1f;							\
 									\
 	/*								\
 	 * Explicit full memory barrier needed before/after as		\
@@ -129,16 +127,13 @@
 	unsigned long temp, flags;					\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	/*								\
 	 * spin lock/unlock provide the needed smp_mb() before/after	\
 	 */								\
 	bitops_lock(flags);						\
 									\
 	temp = *m;							\
-	*m = temp c_op (1UL << nr);					\
+	*m = temp c_op (1UL << (nr & 0x1f));					\
 									\
 	bitops_unlock(flags);						\
 }
@@ -149,17 +144,14 @@
 	unsigned long old, flags;					\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	bitops_lock(flags);						\
 									\
 	old = *m;							\
-	*m = old c_op (1 << nr);					\
+	*m = old c_op (1UL << (nr & 0x1f));				\
 									\
 	bitops_unlock(flags);						\
 									\
-	return (old & (1 << nr)) != 0;					\
+	return (old & (1UL << (nr & 0x1f))) != 0;			\
 }
 
 #endif /* CONFIG_ARC_HAS_LLSC */
@@ -174,11 +166,8 @@
 	unsigned long temp;						\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	temp = *m;							\
-	*m = temp c_op (1UL << nr);					\
+	*m = temp c_op (1UL << (nr & 0x1f));				\
 }
 
 #define __TEST_N_BIT_OP(op, c_op, asm_op)				\
@@ -187,13 +176,10 @@
 	unsigned long old;						\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	old = *m;							\
-	*m = old c_op (1 << nr);					\
+	*m = old c_op (1UL << (nr & 0x1f));				\
 									\
-	return (old & (1 << nr)) != 0;					\
+	return (old & (1UL << (nr & 0x1f))) != 0;			\
 }
 
 #define BIT_OPS(op, c_op, asm_op)					\
@@ -224,10 +210,7 @@
 
 	addr += nr >> 5;
 
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	mask = 1 << nr;
+	mask = 1UL << (nr & 0x1f);
 
 	return ((mask & *addr) != 0);
 }
diff --git a/arch/arc/include/asm/futex.h b/arch/arc/include/asm/futex.h
index 05b5aaf..70cfe16 100644
--- a/arch/arc/include/asm/futex.h
+++ b/arch/arc/include/asm/futex.h
@@ -16,12 +16,15 @@
 #include <linux/uaccess.h>
 #include <asm/errno.h>
 
+#ifdef CONFIG_ARC_HAS_LLSC
+
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
 							\
 	__asm__ __volatile__(				\
-	"1:	ld  %1, [%2]			\n"	\
+	"1:	llock	%1, [%2]		\n"	\
 		insn				"\n"	\
-	"2:	st  %0, [%2]			\n"	\
+	"2:	scond	%0, [%2]		\n"	\
+	"	bnz	1b			\n"	\
 	"	mov %0, 0			\n"	\
 	"3:					\n"	\
 	"	.section .fixup,\"ax\"		\n"	\
@@ -39,6 +42,33 @@
 	: "r" (uaddr), "r" (oparg), "ir" (-EFAULT)	\
 	: "cc", "memory")
 
+#else	/* !CONFIG_ARC_HAS_LLSC */
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
+							\
+	__asm__ __volatile__(				\
+	"1:	ld	%1, [%2]		\n"	\
+		insn				"\n"	\
+	"2:	st	%0, [%2]		\n"	\
+	"	mov %0, 0			\n"	\
+	"3:					\n"	\
+	"	.section .fixup,\"ax\"		\n"	\
+	"	.align  4			\n"	\
+	"4:	mov %0, %4			\n"	\
+	"	b   3b				\n"	\
+	"	.previous			\n"	\
+	"	.section __ex_table,\"a\"	\n"	\
+	"	.align  4			\n"	\
+	"	.word   1b, 4b			\n"	\
+	"	.word   2b, 4b			\n"	\
+	"	.previous			\n"	\
+							\
+	: "=&r" (ret), "=&r" (oldval)			\
+	: "r" (uaddr), "r" (oparg), "ir" (-EFAULT)	\
+	: "cc", "memory")
+
+#endif
+
 static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
 {
 	int op = (encoded_op >> 28) & 7;
@@ -123,11 +153,17 @@
 
 	pagefault_disable();
 
-	/* TBD : can use llock/scond */
 	__asm__ __volatile__(
-	"1:	ld    %0, [%3]	\n"
-	"	brne  %0, %1, 3f	\n"
-	"2:	st    %2, [%3]	\n"
+#ifdef CONFIG_ARC_HAS_LLSC
+	"1:	llock	%0, [%3]		\n"
+	"	brne	%0, %1, 3f		\n"
+	"2:	scond	%2, [%3]		\n"
+	"	bnz	1b			\n"
+#else
+	"1:	ld	%0, [%3]		\n"
+	"	brne	%0, %1, 3f		\n"
+	"2:	st	%2, [%3]		\n"
+#endif
 	"3:	\n"
 	"	.section .fixup,\"ax\"	\n"
 	"4:	mov %0, %4	\n"
diff --git a/arch/arc/include/asm/mm-arch-hooks.h b/arch/arc/include/asm/mm-arch-hooks.h
deleted file mode 100644
index c37541c..0000000
--- a/arch/arc/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARC_MM_ARCH_HOOKS_H
-#define _ASM_ARC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ARC_MM_ARCH_HOOKS_H */
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
index 9175597..91694ec 100644
--- a/arch/arc/include/asm/ptrace.h
+++ b/arch/arc/include/asm/ptrace.h
@@ -106,7 +106,7 @@
 	long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
-#define instruction_pointer(regs)	((regs)->ret)
+#define instruction_pointer(regs)	(unsigned long)((regs)->ret)
 #define profile_pc(regs)		instruction_pointer(regs)
 
 /* return 1 if user mode or 0 if kernel mode */
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 6208c63..26c1568 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -12,7 +12,6 @@
 #include <linux/of.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip.h>
-#include "../../drivers/irqchip/irqchip.h"
 #include <asm/irq.h>
 
 /*
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index fcdddb6..039fac3 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -12,7 +12,6 @@
 #include <linux/of.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip.h>
-#include "../../drivers/irqchip/irqchip.h"
 #include <asm/irq.h>
 
 /*
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index 30284e8..2fb8658 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -175,7 +175,6 @@
 #include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include "../../drivers/irqchip/irqchip.h"
 
 /*
  * Set the DEST for @cmn_irq to @cpu_mask (1 bit per core)
@@ -218,11 +217,28 @@
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 }
 
+#ifdef CONFIG_SMP
 static int
-idu_irq_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool f)
+idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
+		     bool force)
 {
+	unsigned long flags;
+	cpumask_t online;
+
+	/* errout if no online cpu per @cpumask */
+	if (!cpumask_and(&online, cpumask, cpu_online_mask))
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	idu_set_dest(data->hwirq, cpumask_bits(&online)[0]);
+	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+
 	return IRQ_SET_MASK_OK;
 }
+#endif
 
 static struct irq_chip idu_irq_chip = {
 	.name			= "MCIP IDU Intc",
@@ -330,8 +346,7 @@
 		if (!i)
 			idu_first_irq = irq;
 
-		irq_set_handler_data(irq, domain);
-		irq_set_chained_handler(irq, idu_cascade_isr);
+		irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
 	}
 
 	__mcip_cmd(CMD_IDU_ENABLE, 0);
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index a3d1862..18cc015 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -142,17 +142,22 @@
 }
 
 static const struct cpuinfo_data arc_cpu_tbl[] = {
+#ifdef CONFIG_ISA_ARCOMPACT
 	{ {0x20, "ARC 600"      }, 0x2F},
 	{ {0x30, "ARC 700"      }, 0x33},
 	{ {0x34, "ARC 700 R4.10"}, 0x34},
 	{ {0x35, "ARC 700 R4.11"}, 0x35},
-	{ {0x50, "ARC HS38"	}, 0x51},
+#else
+	{ {0x50, "ARC HS38 R2.0"}, 0x51},
+	{ {0x52, "ARC HS38 R2.1"}, 0x52},
+#endif
 	{ {0x00, NULL		} }
 };
 
-#define IS_AVAIL1(v, str)	((v) ? str : "")
-#define IS_USED(cfg)		(IS_ENABLED(cfg) ? "" : "(not used) ")
-#define IS_AVAIL2(v, str, cfg)  IS_AVAIL1(v, str), IS_AVAIL1(v, IS_USED(cfg))
+#define IS_AVAIL1(v, s)		((v) ? s : "")
+#define IS_USED_RUN(v)		((v) ? "" : "(not used) ")
+#define IS_USED_CFG(cfg)	IS_USED_RUN(IS_ENABLED(cfg))
+#define IS_AVAIL2(v, s, cfg)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
 
 static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 {
@@ -226,7 +231,7 @@
 			n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
 		}
 		n += scnprintf(buf + n, len - n, "%s",
-			       IS_USED(CONFIG_ARC_HAS_HW_MPY));
+			       IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
 	}
 
 	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
index 807f7d6..a6f91e8 100644
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@@ -58,7 +58,6 @@
 
 static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
 {
-	struct path path;
 	char *path_nm = NULL;
 	struct mm_struct *mm;
 	struct file *exe_file;
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index b29d62e..1cd6695 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -468,10 +468,18 @@
 noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
 {
 #ifdef CONFIG_ISA_ARCV2
+	/*
+	 * SLC is shared between all cores and concurrent aux operations from
+	 * multiple cores need to be serialized using a spinlock
+	 * A concurrent operation can be silently ignored and/or the old/new
+	 * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop
+	 * below)
+	 */
+	static DEFINE_SPINLOCK(lock);
 	unsigned long flags;
 	unsigned int ctrl;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&lock, flags);
 
 	/*
 	 * The Region Flush operation is specified by CTRL.RGN_OP[11..9]
@@ -504,7 +512,7 @@
 
 	while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
 
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&lock, flags);
 #endif
 }
 
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 74a637a..57706a9 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -60,8 +60,8 @@
 
 	/* This is kernel Virtual address (0x7000_0000 based) */
 	kvaddr = ioremap_nocache((unsigned long)paddr, size);
-	if (kvaddr != NULL)
-		memset(kvaddr, 0, size);
+	if (kvaddr == NULL)
+		return NULL;
 
 	/* This is bus address, platform dependent */
 	*dma_handle = (dma_addr_t)paddr;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a750c14..1c50210 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1693,6 +1693,12 @@
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem"
 	depends on HIGHMEM
+	help
+	  The VM uses one page of physical memory for each page table.
+	  For systems with a lot of processes, this can use a lot of
+	  precious low memory, eventually leading to low memory being
+	  consumed by page tables.  Setting this option will allow
+	  user-space 2nd level page tables to reside in high memory.
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index f1b1579..a2e16f9 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1635,7 +1635,7 @@
 
 config DEBUG_SET_MODULE_RONX
 	bool "Set loadable kernel module data as NX and text as RO"
-	depends on MODULES
+	depends on MODULES && MMU
 	---help---
 	  This option helps catch unintended modifications to loadable
 	  kernel module's text and read-only data. It also prevents execution
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 901739f..5c42d25 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -80,3 +80,7 @@
 		status = "okay";
 	};
 };
+
+&rtc {
+	system-power-controller;
+};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 0d35ab6..7106114 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -74,6 +74,7 @@
 	audio_codec: tlv320aic3106@1b {
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
+		ai3x-micbias-vg = <0x2>;
 	};
 
 	accel: lis331dlh@1d {
@@ -153,7 +154,7 @@
 	ti,audio-routing =
 		"Headphone Jack",	"HPLOUT",
 		"Headphone Jack",	"HPROUT",
-		"LINE1L",		"Line In";
+		"MIC3L",		"Mic3L Switch";
 };
 
 &mcasp0 {
@@ -438,41 +439,50 @@
 	regulators {
 		dcdc1_reg: regulator@0 {
 			/* VDD_1V8 system supply */
+			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
 			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
+			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		dcdc3_reg: regulator@2 {
 			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
+			regulator-max-microvolt = <1325000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		ldo1_reg: regulator@3 {
 			/* VRTC 1.8V always-on supply */
+			regulator-name = "vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
 			/* 3.3V rail */
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
 			/* VDD_3V3A 3.3V rail */
+			regulator-name = "vdd_3v3a";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 		};
 
 		ldo4_reg: regulator@6 {
 			/* VDD_3V3B 3.3V rail */
+			regulator-name = "vdd_3v3b";
+			regulator-always-on;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index c80a3e2..ade28c79 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -132,6 +132,12 @@
 			};
 		};
 
+		emif: emif@4c000000 {
+			compatible = "ti,emif-am4372";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+		};
+
 		edma: edma@49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
@@ -941,6 +947,7 @@
 				ti,hwmods = "dss_rfbi";
 				clocks = <&disp_clk>;
 				clock-names = "fck";
+				status = "disabled";
 			};
 		};
 
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a42cc37..a63bf78 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -605,6 +605,10 @@
 	phy-supply = <&ldousb_reg>;
 };
 
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
index 5dfd3a4..3e21311 100644
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ b/arch/arm/boot/dts/atlas7.dtsi
@@ -135,6 +135,1025 @@
 			compatible = "sirf,atlas7-ioc";
 			reg = <0x18880000 0x1000>,
 				<0x10E40000 0x1000>;
+
+			audio_ac97_pmx: audio_ac97@0 {
+				audio_ac97 {
+					groups = "audio_ac97_grp";
+					function = "audio_ac97";
+				};
+			};
+
+			audio_func_dbg_pmx: audio_func_dbg@0 {
+				audio_func_dbg {
+					groups = "audio_func_dbg_grp";
+					function = "audio_func_dbg";
+				};
+			};
+
+			audio_i2s_pmx: audio_i2s@0 {
+				audio_i2s {
+					groups = "audio_i2s_grp";
+					function = "audio_i2s";
+				};
+			};
+
+			audio_i2s_2ch_pmx: audio_i2s_2ch@0 {
+				audio_i2s_2ch {
+					groups = "audio_i2s_2ch_grp";
+					function = "audio_i2s_2ch";
+				};
+			};
+
+			audio_i2s_extclk_pmx: audio_i2s_extclk@0 {
+				audio_i2s_extclk {
+					groups = "audio_i2s_extclk_grp";
+					function = "audio_i2s_extclk";
+				};
+			};
+
+			audio_uart0_pmx: audio_uart0@0 {
+				audio_uart0 {
+					groups = "audio_uart0_grp";
+					function = "audio_uart0";
+				};
+			};
+
+			audio_uart1_pmx: audio_uart1@0 {
+				audio_uart1 {
+					groups = "audio_uart1_grp";
+					function = "audio_uart1";
+				};
+			};
+
+			audio_uart2_pmx0: audio_uart2@0 {
+				audio_uart2_0 {
+					groups = "audio_uart2_grp0";
+					function = "audio_uart2_m0";
+				};
+			};
+
+			audio_uart2_pmx1: audio_uart2@1 {
+				audio_uart2_1 {
+					groups = "audio_uart2_grp1";
+					function = "audio_uart2_m1";
+				};
+			};
+
+			c_can_trnsvr_pmx: c_can_trnsvr@0 {
+				c_can_trnsvr {
+					groups = "c_can_trnsvr_grp";
+					function = "c_can_trnsvr";
+				};
+			};
+
+			c0_can_pmx0: c0_can@0 {
+				c0_can_0 {
+					groups = "c0_can_grp0";
+					function = "c0_can_m0";
+				};
+			};
+
+			c0_can_pmx1: c0_can@1 {
+				c0_can_1 {
+					groups = "c0_can_grp1";
+					function = "c0_can_m1";
+				};
+			};
+
+			c1_can_pmx0: c1_can@0 {
+				c1_can_0 {
+					groups = "c1_can_grp0";
+					function = "c1_can_m0";
+				};
+			};
+
+			c1_can_pmx1: c1_can@1 {
+				c1_can_1 {
+					groups = "c1_can_grp1";
+					function = "c1_can_m1";
+				};
+			};
+
+			c1_can_pmx2: c1_can@2 {
+				c1_can_2 {
+					groups = "c1_can_grp2";
+					function = "c1_can_m2";
+				};
+			};
+
+			ca_audio_lpc_pmx: ca_audio_lpc@0 {
+				ca_audio_lpc {
+					groups = "ca_audio_lpc_grp";
+					function = "ca_audio_lpc";
+				};
+			};
+
+			ca_bt_lpc_pmx: ca_bt_lpc@0 {
+				ca_bt_lpc {
+					groups = "ca_bt_lpc_grp";
+					function = "ca_bt_lpc";
+				};
+			};
+
+			ca_coex_pmx: ca_coex@0 {
+				ca_coex {
+					groups = "ca_coex_grp";
+					function = "ca_coex";
+				};
+			};
+
+			ca_curator_lpc_pmx: ca_curator_lpc@0 {
+				ca_curator_lpc {
+					groups = "ca_curator_lpc_grp";
+					function = "ca_curator_lpc";
+				};
+			};
+
+			ca_pcm_debug_pmx: ca_pcm_debug@0 {
+				ca_pcm_debug {
+					groups = "ca_pcm_debug_grp";
+					function = "ca_pcm_debug";
+				};
+			};
+
+			ca_pio_pmx: ca_pio@0 {
+				ca_pio {
+					groups = "ca_pio_grp";
+					function = "ca_pio";
+				};
+			};
+
+			ca_sdio_debug_pmx: ca_sdio_debug@0 {
+				ca_sdio_debug {
+					groups = "ca_sdio_debug_grp";
+					function = "ca_sdio_debug";
+				};
+			};
+
+			ca_spi_pmx: ca_spi@0 {
+				ca_spi {
+					groups = "ca_spi_grp";
+					function = "ca_spi";
+				};
+			};
+
+			ca_trb_pmx: ca_trb@0 {
+				ca_trb {
+					groups = "ca_trb_grp";
+					function = "ca_trb";
+				};
+			};
+
+			ca_uart_debug_pmx: ca_uart_debug@0 {
+				ca_uart_debug {
+					groups = "ca_uart_debug_grp";
+					function = "ca_uart_debug";
+				};
+			};
+
+			clkc_pmx0: clkc@0 {
+				clkc_0 {
+					groups = "clkc_grp0";
+					function = "clkc_m0";
+				};
+			};
+
+			clkc_pmx1: clkc@1 {
+				clkc_1 {
+					groups = "clkc_grp1";
+					function = "clkc_m1";
+				};
+			};
+
+			gn_gnss_i2c_pmx: gn_gnss_i2c@0 {
+				gn_gnss_i2c {
+					groups = "gn_gnss_i2c_grp";
+					function = "gn_gnss_i2c";
+				};
+			};
+
+			gn_gnss_uart_nopause_pmx: gn_gnss_uart_nopause@0 {
+				gn_gnss_uart_nopause {
+					groups = "gn_gnss_uart_nopause_grp";
+					function = "gn_gnss_uart_nopause";
+				};
+			};
+
+			gn_gnss_uart_pmx: gn_gnss_uart@0 {
+				gn_gnss_uart {
+					groups = "gn_gnss_uart_grp";
+					function = "gn_gnss_uart";
+				};
+			};
+
+			gn_trg_spi_pmx0: gn_trg_spi@0 {
+				gn_trg_spi_0 {
+					groups = "gn_trg_spi_grp0";
+					function = "gn_trg_spi_m0";
+				};
+			};
+
+			gn_trg_spi_pmx1: gn_trg_spi@1 {
+				gn_trg_spi_1 {
+					groups = "gn_trg_spi_grp1";
+					function = "gn_trg_spi_m1";
+				};
+			};
+
+			cvbs_dbg_pmx: cvbs_dbg@0 {
+				cvbs_dbg {
+					groups = "cvbs_dbg_grp";
+					function = "cvbs_dbg";
+				};
+			};
+
+			cvbs_dbg_test_pmx0: cvbs_dbg_test@0 {
+				cvbs_dbg_test_0 {
+					groups = "cvbs_dbg_test_grp0";
+					function = "cvbs_dbg_test_m0";
+				};
+			};
+
+			cvbs_dbg_test_pmx1: cvbs_dbg_test@1 {
+				cvbs_dbg_test_1 {
+					groups = "cvbs_dbg_test_grp1";
+					function = "cvbs_dbg_test_m1";
+				};
+			};
+
+			cvbs_dbg_test_pmx2: cvbs_dbg_test@2 {
+				cvbs_dbg_test_2 {
+					groups = "cvbs_dbg_test_grp2";
+					function = "cvbs_dbg_test_m2";
+				};
+			};
+
+			cvbs_dbg_test_pmx3: cvbs_dbg_test@3 {
+				cvbs_dbg_test_3 {
+					groups = "cvbs_dbg_test_grp3";
+					function = "cvbs_dbg_test_m3";
+				};
+			};
+
+			cvbs_dbg_test_pmx4: cvbs_dbg_test@4 {
+				cvbs_dbg_test_4 {
+					groups = "cvbs_dbg_test_grp4";
+					function = "cvbs_dbg_test_m4";
+				};
+			};
+
+			cvbs_dbg_test_pmx5: cvbs_dbg_test@5 {
+				cvbs_dbg_test_5 {
+					groups = "cvbs_dbg_test_grp5";
+					function = "cvbs_dbg_test_m5";
+				};
+			};
+
+			cvbs_dbg_test_pmx6: cvbs_dbg_test@6 {
+				cvbs_dbg_test_6 {
+					groups = "cvbs_dbg_test_grp6";
+					function = "cvbs_dbg_test_m6";
+				};
+			};
+
+			cvbs_dbg_test_pmx7: cvbs_dbg_test@7 {
+				cvbs_dbg_test_7 {
+					groups = "cvbs_dbg_test_grp7";
+					function = "cvbs_dbg_test_m7";
+				};
+			};
+
+			cvbs_dbg_test_pmx8: cvbs_dbg_test@8 {
+				cvbs_dbg_test_8 {
+					groups = "cvbs_dbg_test_grp8";
+					function = "cvbs_dbg_test_m8";
+				};
+			};
+
+			cvbs_dbg_test_pmx9: cvbs_dbg_test@9 {
+				cvbs_dbg_test_9 {
+					groups = "cvbs_dbg_test_grp9";
+					function = "cvbs_dbg_test_m9";
+				};
+			};
+
+			cvbs_dbg_test_pmx10: cvbs_dbg_test@10 {
+				cvbs_dbg_test_10 {
+					groups = "cvbs_dbg_test_grp10";
+					function = "cvbs_dbg_test_m10";
+				};
+			};
+
+			cvbs_dbg_test_pmx11: cvbs_dbg_test@11 {
+				cvbs_dbg_test_11 {
+					groups = "cvbs_dbg_test_grp11";
+					function = "cvbs_dbg_test_m11";
+				};
+			};
+
+			cvbs_dbg_test_pmx12: cvbs_dbg_test@12 {
+				cvbs_dbg_test_12 {
+					groups = "cvbs_dbg_test_grp12";
+					function = "cvbs_dbg_test_m12";
+				};
+			};
+
+			cvbs_dbg_test_pmx13: cvbs_dbg_test@13 {
+				cvbs_dbg_test_13 {
+					groups = "cvbs_dbg_test_grp13";
+					function = "cvbs_dbg_test_m13";
+				};
+			};
+
+			cvbs_dbg_test_pmx14: cvbs_dbg_test@14 {
+				cvbs_dbg_test_14 {
+					groups = "cvbs_dbg_test_grp14";
+					function = "cvbs_dbg_test_m14";
+				};
+			};
+
+			cvbs_dbg_test_pmx15: cvbs_dbg_test@15 {
+				cvbs_dbg_test_15 {
+					groups = "cvbs_dbg_test_grp15";
+					function = "cvbs_dbg_test_m15";
+				};
+			};
+
+			gn_gnss_power_pmx: gn_gnss_power@0 {
+				gn_gnss_power {
+					groups = "gn_gnss_power_grp";
+					function = "gn_gnss_power";
+				};
+			};
+
+			gn_gnss_sw_status_pmx: gn_gnss_sw_status@0 {
+				gn_gnss_sw_status {
+					groups = "gn_gnss_sw_status_grp";
+					function = "gn_gnss_sw_status";
+				};
+			};
+
+			gn_gnss_eclk_pmx: gn_gnss_eclk@0 {
+				gn_gnss_eclk {
+					groups = "gn_gnss_eclk_grp";
+					function = "gn_gnss_eclk";
+				};
+			};
+
+			gn_gnss_irq1_pmx0: gn_gnss_irq1@0 {
+				gn_gnss_irq1_0 {
+					groups = "gn_gnss_irq1_grp0";
+					function = "gn_gnss_irq1_m0";
+				};
+			};
+
+			gn_gnss_irq2_pmx0: gn_gnss_irq2@0 {
+				gn_gnss_irq2_0 {
+					groups = "gn_gnss_irq2_grp0";
+					function = "gn_gnss_irq2_m0";
+				};
+			};
+
+			gn_gnss_tm_pmx: gn_gnss_tm@0 {
+				gn_gnss_tm {
+					groups = "gn_gnss_tm_grp";
+					function = "gn_gnss_tm";
+				};
+			};
+
+			gn_gnss_tsync_pmx: gn_gnss_tsync@0 {
+				gn_gnss_tsync {
+					groups = "gn_gnss_tsync_grp";
+					function = "gn_gnss_tsync";
+				};
+			};
+
+			gn_io_gnsssys_sw_cfg_pmx: gn_io_gnsssys_sw_cfg@0 {
+				gn_io_gnsssys_sw_cfg {
+					groups = "gn_io_gnsssys_sw_cfg_grp";
+					function = "gn_io_gnsssys_sw_cfg";
+				};
+			};
+
+			gn_trg_pmx0: gn_trg@0 {
+				gn_trg_0 {
+					groups = "gn_trg_grp0";
+					function = "gn_trg_m0";
+				};
+			};
+
+			gn_trg_pmx1: gn_trg@1 {
+				gn_trg_1 {
+					groups = "gn_trg_grp1";
+					function = "gn_trg_m1";
+				};
+			};
+
+			gn_trg_shutdown_pmx0: gn_trg_shutdown@0 {
+				gn_trg_shutdown_0 {
+					groups = "gn_trg_shutdown_grp0";
+					function = "gn_trg_shutdown_m0";
+				};
+			};
+
+			gn_trg_shutdown_pmx1: gn_trg_shutdown@1 {
+				gn_trg_shutdown_1 {
+					groups = "gn_trg_shutdown_grp1";
+					function = "gn_trg_shutdown_m1";
+				};
+			};
+
+			gn_trg_shutdown_pmx2: gn_trg_shutdown@2 {
+				gn_trg_shutdown_2 {
+					groups = "gn_trg_shutdown_grp2";
+					function = "gn_trg_shutdown_m2";
+				};
+			};
+
+			gn_trg_shutdown_pmx3: gn_trg_shutdown@3 {
+				gn_trg_shutdown_3 {
+					groups = "gn_trg_shutdown_grp3";
+					function = "gn_trg_shutdown_m3";
+				};
+			};
+
+			i2c0_pmx: i2c0@0 {
+				i2c0 {
+					groups = "i2c0_grp";
+					function = "i2c0";
+				};
+			};
+
+			i2c1_pmx: i2c1@0 {
+				i2c1 {
+					groups = "i2c1_grp";
+					function = "i2c1";
+				};
+			};
+
+			jtag_pmx0: jtag@0 {
+				jtag_0 {
+					groups = "jtag_grp0";
+					function = "jtag_m0";
+				};
+			};
+
+			ks_kas_spi_pmx0: ks_kas_spi@0 {
+				ks_kas_spi_0 {
+					groups = "ks_kas_spi_grp0";
+					function = "ks_kas_spi_m0";
+				};
+			};
+
+			ld_ldd_pmx: ld_ldd@0 {
+				ld_ldd {
+					groups = "ld_ldd_grp";
+					function = "ld_ldd";
+				};
+			};
+
+			ld_ldd_16bit_pmx: ld_ldd_16bit@0 {
+				ld_ldd_16bit {
+					groups = "ld_ldd_16bit_grp";
+					function = "ld_ldd_16bit";
+				};
+			};
+
+			ld_ldd_fck_pmx: ld_ldd_fck@0 {
+				ld_ldd_fck {
+					groups = "ld_ldd_fck_grp";
+					function = "ld_ldd_fck";
+				};
+			};
+
+			ld_ldd_lck_pmx: ld_ldd_lck@0 {
+				ld_ldd_lck {
+					groups = "ld_ldd_lck_grp";
+					function = "ld_ldd_lck";
+				};
+			};
+
+			lr_lcdrom_pmx: lr_lcdrom@0 {
+				lr_lcdrom {
+					groups = "lr_lcdrom_grp";
+					function = "lr_lcdrom";
+				};
+			};
+
+			lvds_analog_pmx: lvds_analog@0 {
+				lvds_analog {
+					groups = "lvds_analog_grp";
+					function = "lvds_analog";
+				};
+			};
+
+			nd_df_pmx: nd_df@0 {
+				nd_df {
+					groups = "nd_df_grp";
+					function = "nd_df";
+				};
+			};
+
+			nd_df_nowp_pmx: nd_df_nowp@0 {
+				nd_df_nowp {
+					groups = "nd_df_nowp_grp";
+					function = "nd_df_nowp";
+				};
+			};
+
+			ps_pmx: ps@0 {
+				ps {
+					groups = "ps_grp";
+					function = "ps";
+				};
+			};
+
+			pwc_core_on_pmx: pwc_core_on@0 {
+				pwc_core_on {
+					groups = "pwc_core_on_grp";
+					function = "pwc_core_on";
+				};
+			};
+
+			pwc_ext_on_pmx: pwc_ext_on@0 {
+				pwc_ext_on {
+					groups = "pwc_ext_on_grp";
+					function = "pwc_ext_on";
+				};
+			};
+
+			pwc_gpio3_clk_pmx: pwc_gpio3_clk@0 {
+				pwc_gpio3_clk {
+					groups = "pwc_gpio3_clk_grp";
+					function = "pwc_gpio3_clk";
+				};
+			};
+
+			pwc_io_on_pmx: pwc_io_on@0 {
+				pwc_io_on {
+					groups = "pwc_io_on_grp";
+					function = "pwc_io_on";
+				};
+			};
+
+			pwc_lowbatt_b_pmx0: pwc_lowbatt_b@0 {
+				pwc_lowbatt_b_0 {
+					groups = "pwc_lowbatt_b_grp0";
+					function = "pwc_lowbatt_b_m0";
+				};
+			};
+
+			pwc_mem_on_pmx: pwc_mem_on@0 {
+				pwc_mem_on {
+					groups = "pwc_mem_on_grp";
+					function = "pwc_mem_on";
+				};
+			};
+
+			pwc_on_key_b_pmx0: pwc_on_key_b@0 {
+				pwc_on_key_b_0 {
+					groups = "pwc_on_key_b_grp0";
+					function = "pwc_on_key_b_m0";
+				};
+			};
+
+			pwc_wakeup_src0_pmx: pwc_wakeup_src0@0 {
+				pwc_wakeup_src0 {
+					groups = "pwc_wakeup_src0_grp";
+					function = "pwc_wakeup_src0";
+				};
+			};
+
+			pwc_wakeup_src1_pmx: pwc_wakeup_src1@0 {
+				pwc_wakeup_src1 {
+					groups = "pwc_wakeup_src1_grp";
+					function = "pwc_wakeup_src1";
+				};
+			};
+
+			pwc_wakeup_src2_pmx: pwc_wakeup_src2@0 {
+				pwc_wakeup_src2 {
+					groups = "pwc_wakeup_src2_grp";
+					function = "pwc_wakeup_src2";
+				};
+			};
+
+			pwc_wakeup_src3_pmx: pwc_wakeup_src3@0 {
+				pwc_wakeup_src3 {
+					groups = "pwc_wakeup_src3_grp";
+					function = "pwc_wakeup_src3";
+				};
+			};
+
+			pw_cko0_pmx0: pw_cko0@0 {
+				pw_cko0_0 {
+					groups = "pw_cko0_grp0";
+					function = "pw_cko0_m0";
+				};
+			};
+
+			pw_cko0_pmx1: pw_cko0@1 {
+				pw_cko0_1 {
+					groups = "pw_cko0_grp1";
+					function = "pw_cko0_m1";
+				};
+			};
+
+			pw_cko0_pmx2: pw_cko0@2 {
+				pw_cko0_2 {
+					groups = "pw_cko0_grp2";
+					function = "pw_cko0_m2";
+				};
+			};
+
+			pw_cko1_pmx0: pw_cko1@0 {
+				pw_cko1_0 {
+					groups = "pw_cko1_grp0";
+					function = "pw_cko1_m0";
+				};
+			};
+
+			pw_cko1_pmx1: pw_cko1@1 {
+				pw_cko1_1 {
+					groups = "pw_cko1_grp1";
+					function = "pw_cko1_m1";
+				};
+			};
+
+			pw_i2s01_clk_pmx0: pw_i2s01_clk@0 {
+				pw_i2s01_clk_0 {
+					groups = "pw_i2s01_clk_grp0";
+					function = "pw_i2s01_clk_m0";
+				};
+			};
+
+			pw_i2s01_clk_pmx1: pw_i2s01_clk@1 {
+				pw_i2s01_clk_1 {
+					groups = "pw_i2s01_clk_grp1";
+					function = "pw_i2s01_clk_m1";
+				};
+			};
+
+			pw_pwm0_pmx: pw_pwm0@0 {
+				pw_pwm0 {
+					groups = "pw_pwm0_grp";
+					function = "pw_pwm0";
+				};
+			};
+
+			pw_pwm1_pmx: pw_pwm1@0 {
+				pw_pwm1 {
+					groups = "pw_pwm1_grp";
+					function = "pw_pwm1";
+				};
+			};
+
+			pw_pwm2_pmx0: pw_pwm2@0 {
+				pw_pwm2_0 {
+					groups = "pw_pwm2_grp0";
+					function = "pw_pwm2_m0";
+				};
+			};
+
+			pw_pwm2_pmx1: pw_pwm2@1 {
+				pw_pwm2_1 {
+					groups = "pw_pwm2_grp1";
+					function = "pw_pwm2_m1";
+				};
+			};
+
+			pw_pwm3_pmx0: pw_pwm3@0 {
+				pw_pwm3_0 {
+					groups = "pw_pwm3_grp0";
+					function = "pw_pwm3_m0";
+				};
+			};
+
+			pw_pwm3_pmx1: pw_pwm3@1 {
+				pw_pwm3_1 {
+					groups = "pw_pwm3_grp1";
+					function = "pw_pwm3_m1";
+				};
+			};
+
+			pw_pwm_cpu_vol_pmx0: pw_pwm_cpu_vol@0 {
+				pw_pwm_cpu_vol_0 {
+					groups = "pw_pwm_cpu_vol_grp0";
+					function = "pw_pwm_cpu_vol_m0";
+				};
+			};
+
+			pw_pwm_cpu_vol_pmx1: pw_pwm_cpu_vol@1 {
+				pw_pwm_cpu_vol_1 {
+					groups = "pw_pwm_cpu_vol_grp1";
+					function = "pw_pwm_cpu_vol_m1";
+				};
+			};
+
+			pw_backlight_pmx0: pw_backlight@0 {
+				pw_backlight_0 {
+					groups = "pw_backlight_grp0";
+					function = "pw_backlight_m0";
+				};
+			};
+
+			pw_backlight_pmx1: pw_backlight@1 {
+				pw_backlight_1 {
+					groups = "pw_backlight_grp1";
+					function = "pw_backlight_m1";
+				};
+			};
+
+			rg_eth_mac_pmx: rg_eth_mac@0 {
+				rg_eth_mac {
+					groups = "rg_eth_mac_grp";
+					function = "rg_eth_mac";
+				};
+			};
+
+			rg_gmac_phy_intr_n_pmx: rg_gmac_phy_intr_n@0 {
+				rg_gmac_phy_intr_n {
+					groups = "rg_gmac_phy_intr_n_grp";
+					function = "rg_gmac_phy_intr_n";
+				};
+			};
+
+			rg_rgmii_mac_pmx: rg_rgmii_mac@0 {
+				rg_rgmii_mac {
+					groups = "rg_rgmii_mac_grp";
+					function = "rg_rgmii_mac";
+				};
+			};
+
+			rg_rgmii_phy_ref_clk_pmx0: rg_rgmii_phy_ref_clk@0 {
+				rg_rgmii_phy_ref_clk_0 {
+					groups =
+						"rg_rgmii_phy_ref_clk_grp0";
+					function =
+						"rg_rgmii_phy_ref_clk_m0";
+				};
+			};
+
+			rg_rgmii_phy_ref_clk_pmx1: rg_rgmii_phy_ref_clk@1 {
+				rg_rgmii_phy_ref_clk_1 {
+					groups =
+						"rg_rgmii_phy_ref_clk_grp1";
+					function =
+						"rg_rgmii_phy_ref_clk_m1";
+				};
+			};
+
+			sd0_pmx: sd0@0 {
+				sd0 {
+					groups = "sd0_grp";
+					function = "sd0";
+				};
+			};
+
+			sd0_4bit_pmx: sd0_4bit@0 {
+				sd0_4bit {
+					groups = "sd0_4bit_grp";
+					function = "sd0_4bit";
+				};
+			};
+
+			sd1_pmx: sd1@0 {
+				sd1 {
+					groups = "sd1_grp";
+					function = "sd1";
+				};
+			};
+
+			sd1_4bit_pmx0: sd1_4bit@0 {
+				sd1_4bit_0 {
+					groups = "sd1_4bit_grp0";
+					function = "sd1_4bit_m0";
+				};
+			};
+
+			sd1_4bit_pmx1: sd1_4bit@1 {
+				sd1_4bit_1 {
+					groups = "sd1_4bit_grp1";
+					function = "sd1_4bit_m1";
+				};
+			};
+
+			sd2_pmx0: sd2@0 {
+				sd2_0 {
+					groups = "sd2_grp0";
+					function = "sd2_m0";
+				};
+			};
+
+			sd2_no_cdb_pmx0: sd2_no_cdb@0 {
+				sd2_no_cdb_0 {
+					groups = "sd2_no_cdb_grp0";
+					function = "sd2_no_cdb_m0";
+				};
+			};
+
+			sd3_pmx: sd3@0 {
+				sd3 {
+					groups = "sd3_grp";
+					function = "sd3";
+				};
+			};
+
+			sd5_pmx: sd5@0 {
+				sd5 {
+					groups = "sd5_grp";
+					function = "sd5";
+				};
+			};
+
+			sd6_pmx0: sd6@0 {
+				sd6_0 {
+					groups = "sd6_grp0";
+					function = "sd6_m0";
+				};
+			};
+
+			sd6_pmx1: sd6@1 {
+				sd6_1 {
+					groups = "sd6_grp1";
+					function = "sd6_m1";
+				};
+			};
+
+			sp0_ext_ldo_on_pmx: sp0_ext_ldo_on@0 {
+				sp0_ext_ldo_on {
+					groups = "sp0_ext_ldo_on_grp";
+					function = "sp0_ext_ldo_on";
+				};
+			};
+
+			sp0_qspi_pmx: sp0_qspi@0 {
+				sp0_qspi {
+					groups = "sp0_qspi_grp";
+					function = "sp0_qspi";
+				};
+			};
+
+			sp1_spi_pmx: sp1_spi@0 {
+				sp1_spi {
+					groups = "sp1_spi_grp";
+					function = "sp1_spi";
+				};
+			};
+
+			tpiu_trace_pmx: tpiu_trace@0 {
+				tpiu_trace {
+					groups = "tpiu_trace_grp";
+					function = "tpiu_trace";
+				};
+			};
+
+			uart0_pmx: uart0@0 {
+				uart0 {
+					groups = "uart0_grp";
+					function = "uart0";
+				};
+			};
+
+			uart0_nopause_pmx: uart0_nopause@0 {
+				uart0_nopause {
+					groups = "uart0_nopause_grp";
+					function = "uart0_nopause";
+				};
+			};
+
+			uart1_pmx: uart1@0 {
+				uart1 {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+
+			uart2_pmx: uart2@0 {
+				uart2 {
+					groups = "uart2_grp";
+					function = "uart2";
+				};
+			};
+
+			uart3_pmx0: uart3@0 {
+				uart3_0 {
+					groups = "uart3_grp0";
+					function = "uart3_m0";
+				};
+			};
+
+			uart3_pmx1: uart3@1 {
+				uart3_1 {
+					groups = "uart3_grp1";
+					function = "uart3_m1";
+				};
+			};
+
+			uart3_pmx2: uart3@2 {
+				uart3_2 {
+					groups = "uart3_grp2";
+					function = "uart3_m2";
+				};
+			};
+
+			uart3_pmx3: uart3@3 {
+				uart3_3 {
+					groups = "uart3_grp3";
+					function = "uart3_m3";
+				};
+			};
+
+			uart3_nopause_pmx0: uart3_nopause@0 {
+				uart3_nopause_0 {
+					groups = "uart3_nopause_grp0";
+					function = "uart3_nopause_m0";
+				};
+			};
+
+			uart3_nopause_pmx1: uart3_nopause@1 {
+				uart3_nopause_1 {
+					groups = "uart3_nopause_grp1";
+					function = "uart3_nopause_m1";
+				};
+			};
+
+			uart4_pmx0: uart4@0 {
+				uart4_0 {
+					groups = "uart4_grp0";
+					function = "uart4_m0";
+				};
+			};
+
+			uart4_pmx1: uart4@1 {
+				uart4_1 {
+					groups = "uart4_grp1";
+					function = "uart4_m1";
+				};
+			};
+
+			uart4_pmx2: uart4@2 {
+				uart4_2 {
+					groups = "uart4_grp2";
+					function = "uart4_m2";
+				};
+			};
+
+			uart4_nopause_pmx: uart4_nopause@0 {
+				uart4_nopause {
+					groups = "uart4_nopause_grp";
+					function = "uart4_nopause";
+				};
+			};
+
+			usb0_drvvbus_pmx: usb0_drvvbus@0 {
+				usb0_drvvbus {
+					groups = "usb0_drvvbus_grp";
+					function = "usb0_drvvbus";
+				};
+			};
+
+			usb1_drvvbus_pmx: usb1_drvvbus@0 {
+				usb1_drvvbus {
+					groups = "usb1_drvvbus_grp";
+					function = "usb1_drvvbus";
+				};
+			};
+
+			visbus_dout_pmx: visbus_dout@0 {
+				visbus_dout {
+					groups = "visbus_dout_grp";
+					function = "visbus_dout";
+				};
+			};
+
+			vi_vip1_pmx: vi_vip1@0 {
+				vi_vip1 {
+					groups = "vi_vip1_grp";
+					function = "vi_vip1";
+				};
+			};
+
+			vi_vip1_ext_pmx: vi_vip1_ext@0 {
+				vi_vip1_ext {
+					groups = "vi_vip1_ext_grp";
+					function = "vi_vip1_ext";
+				};
+			};
+
+			vi_vip1_low8bit_pmx: vi_vip1_low8bit@0 {
+				vi_vip1_low8bit {
+					groups = "vi_vip1_low8bit_grp";
+					function = "vi_vip1_low8bit";
+				};
+			};
+
+			vi_vip1_high8bit_pmx: vi_vip1_high8bit@0 {
+				vi_vip1_high8bit {
+					groups = "vi_vip1_high8bit_grp";
+					function = "vi_vip1_high8bit";
+				};
+			};
 		};
 
 		pmipc {
@@ -356,6 +1375,12 @@
 				clock-names = "gpio0_io";
 				gpio-controller;
 				interrupt-controller;
+
+				gpio-banks = <2>;
+				gpio-ranges = <&pinctrl 0 0 0>,
+						<&pinctrl 32 0 0>;
+				gpio-ranges-group-names = "lvds_gpio_grp",
+							"uart_nand_gpio_grp";
 			};
 
 			nand@17050000 {
@@ -461,11 +1486,22 @@
 				#interrupt-cells = <2>;
 				compatible = "sirf,atlas7-gpio";
 				reg = <0x13300000 0x1000>;
-				interrupts = <0 43 0>, <0 44 0>, <0 45 0>;
+				interrupts = <0 43 0>, <0 44 0>,
+						<0 45 0>, <0 46 0>;
 				clocks = <&car 84>;
 				clock-names = "gpio1_io";
 				gpio-controller;
 				interrupt-controller;
+
+				gpio-banks = <4>;
+				gpio-ranges = <&pinctrl 0 0 0>,
+						<&pinctrl 32 0 0>,
+						<&pinctrl 64 0 0>,
+						<&pinctrl 96 0 0>;
+				gpio-ranges-group-names = "gnss_gpio_grp",
+							"lcd_vip_gpio_grp",
+							"sdio_i2s_gpio_grp",
+							"sp_rgmii_gpio_grp";
 			};
 
 			sd2: sdhci@14200000 {
@@ -744,6 +1780,10 @@
 				interrupts = <0 47 0>;
 				gpio-controller;
 				interrupt-controller;
+
+				gpio-banks = <1>;
+				gpio-ranges = <&pinctrl 0 0 0>;
+				gpio-ranges-group-names = "rtc_gpio_grp";
 			};
 
 			rtc-iobg@18840000 {
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index 9c7fb0a..4e42f30c 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -22,6 +22,7 @@
 			MATRIX_KEY(0x00, 0x02, KEY_F1)
 			MATRIX_KEY(0x00, 0x03, KEY_B)
 			MATRIX_KEY(0x00, 0x04, KEY_F10)
+			MATRIX_KEY(0x00, 0x05, KEY_RO)
 			MATRIX_KEY(0x00, 0x06, KEY_N)
 			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
 			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
@@ -34,6 +35,7 @@
 			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
 			MATRIX_KEY(0x01, 0x09, KEY_F9)
 			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+			MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
 
 			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
 			MATRIX_KEY(0x02, 0x01, KEY_TAB)
@@ -45,6 +47,7 @@
 			MATRIX_KEY(0x02, 0x07, KEY_102ND)
 			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
 			MATRIX_KEY(0x02, 0x09, KEY_F8)
+			MATRIX_KEY(0x02, 0x0a, KEY_YEN)
 
 			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
 			MATRIX_KEY(0x03, 0x02, KEY_F2)
@@ -53,6 +56,7 @@
 			MATRIX_KEY(0x03, 0x06, KEY_6)
 			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
 			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
 
 			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
 			MATRIX_KEY(0x04, 0x01, KEY_A)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index aa46590..096f68b 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -686,7 +686,8 @@
 
 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4e1b605..80373841 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -587,9 +587,10 @@
 
 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };
 
 &qspi {
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index c892d58..b995333 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -468,6 +468,7 @@
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
 				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
 			};
 
 			spdif@80054000 {
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index dd45e69..9351296 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -10,6 +10,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "imx25.dtsi"
 
@@ -114,8 +115,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 1 0>;
-	wp-gpios = <&gpio2 0 0>;
+	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index bc215e4..b69be5c 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -108,7 +108,7 @@
 			};
 
 			gpt1: timer@10003000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10003000 0x1000>;
 				interrupts = <26>;
 				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
@@ -117,7 +117,7 @@
 			};
 
 			gpt2: timer@10004000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10004000 0x1000>;
 				interrupts = <25>;
 				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
@@ -126,7 +126,7 @@
 			};
 
 			gpt3: timer@10005000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10005000 0x1000>;
 				interrupts = <24>;
 				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
@@ -376,7 +376,7 @@
 			};
 
 			gpt4: timer@10019000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10019000 0x1000>;
 				interrupts = <4>;
 				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
@@ -385,7 +385,7 @@
 			};
 
 			gpt5: timer@1001a000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001a000 0x1000>;
 				interrupts = <3>;
 				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
@@ -436,7 +436,7 @@
 			};
 
 			gpt6: timer@1001f000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001f000 0x1000>;
 				interrupts = <2>;
 				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 93d3ea1..0f3fe29 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -98,7 +98,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index e9337ad..3bc1883 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -103,8 +103,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index d0e0f57..53f4088 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -124,8 +124,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 181ae5e..b0d5542 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -147,8 +147,8 @@
 &esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 0>;
-	wp-gpios = <&gpio3 12 0>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 	status = "okay";
 };
@@ -295,9 +295,10 @@
 &tve {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
 	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 1d32557..fc89ce1 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -41,8 +41,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 0>;
-	wp-gpios = <&gpio4 11 0>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 4f1f0e2..e03373a 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -41,8 +41,8 @@
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 0>;
-	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 704bd72..d3e50b2 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -183,7 +183,7 @@
 };
 
 &esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
@@ -191,7 +191,7 @@
 };
 
 &esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
index c17d3ad..fc51b87 100644
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -119,8 +119,8 @@
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 0>;
-	wp-gpios = <&gpio2 19 0>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 43cb3fd..5111f51 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -305,8 +305,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -314,8 +314,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 78df05e..d6515f7 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -196,8 +197,8 @@
 };
 
 &usdhc3 {
-	cd-gpios = <&gpio6 11 0>;
-	wp-gpios = <&gpio6 14 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 703539c..00bd63e 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -161,7 +162,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index a43abfa..5645d52 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -251,7 +251,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -260,7 +260,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e6d9195..f4d6ae5 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -173,7 +173,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -181,7 +181,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 1d85de2..a47a039 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -392,7 +392,7 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -400,7 +400,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	no-1-8-v;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 59e5d15..ff41f83 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -258,6 +258,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 2c253d6..45e7c39 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -181,7 +183,7 @@
 &usdhc2 { /* module slot */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b5756c2..4493f6e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -318,7 +318,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 86f03c1..a857d12 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -324,7 +324,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4a8d97f..1afe338 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -417,7 +417,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 62a82f3..6dd0b76 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -299,6 +299,6 @@
 		&pinctrl_hummingboard_usdhc2
 	>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 3af16df..d7fe667 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -453,7 +453,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -461,7 +461,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1ce6133..9e6ecd9 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -409,8 +409,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	status = "disabled";
 };
 
@@ -418,7 +418,7 @@
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
-        cd-gpios = <&gpio1 27 0>;
-        wp-gpios = <&gpio1 29 0>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
         status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 488a640..3373fd9 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -342,7 +342,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -351,6 +351,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 3b24b126..e329ca5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -467,8 +467,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 0>;
-	wp-gpios = <&gpio1 13 0>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index e00c44f..7823793 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -448,8 +448,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -457,7 +457,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a626e6d..944eb81 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -562,8 +562,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 2 0>;
-	wp-gpios = <&gpio2 3 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -571,8 +571,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 0 0>;
-	wp-gpios = <&gpio2 1 0>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f02b80b..da08de3 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -680,7 +680,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 2 0>;
+	cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };
@@ -690,7 +690,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 3 0>;
+	cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 5fb0916..9e096d8 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -9,6 +9,8 @@
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -250,13 +252,13 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio3 9 0>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 945887d..b84dff2 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -617,8 +617,8 @@
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio4 7 0>;
-	wp-gpios = <&gpio4 6 0>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -627,8 +627,8 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio5 0 0>;
-	wp-gpios = <&gpio4 29 0>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -637,6 +637,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 0>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index e3c0b63..115f3fd 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -49,7 +49,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -61,7 +61,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
 	enable-sdio-wakup;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index cef04ce..ac88c34 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -293,7 +293,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -304,7 +304,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 4d1a4b9..fdd1d7c 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -234,8 +234,8 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 0>;
-	wp-gpios = <&gpio5 1 0>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 	enable-sdio-wakeup;
 	keep-power-in-suspend;
 	status = "okay";
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 50e555e..1b6494f 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -86,7 +86,7 @@
 			gpio,syscon-dev = <&devctrl 0x240>;
 		};
 
-		pcie@21020000 {
+		pcie1: pcie@21020000 {
 			compatible = "ti,keystone-pcie","snps,dw-pcie";
 			clocks = <&clkpcie1>;
 			clock-names = "pcie";
@@ -96,6 +96,7 @@
 			ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
 				0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
 
+			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
 
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index c06542b..e7a6f6d 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -286,7 +286,7 @@
 			ti,syscon-dev = <&devctrl 0x2a0>;
 		};
 
-		pcie@21800000 {
+		pcie0: pcie@21800000 {
 			compatible = "ti,keystone-pcie", "snps,dw-pcie";
 			clocks = <&clkpcie>;
 			clock-names = "pcie";
@@ -296,6 +296,7 @@
 			ranges = <0x81000000 0 0 0x23250000 0 0x4000
 				0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
 
+			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
 
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 233c69e..df8908a 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -120,7 +120,7 @@
 
 	lcd0: display@0 {
 		compatible = "lgphilips,lb035q02";
-		label = "lcd";
+		label = "lcd35";
 
 		reg = <1>;					/* CS1 */
 		spi-max-frequency = <10000000>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index f5395b7..048fd21 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -98,7 +98,7 @@
 
 	lcd0: display@0 {
 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
-		label = "lcd";
+		label = "lcd43";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&lte430_pins>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index f884d6a..7d31c6f 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -551,6 +551,7 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
@@ -558,6 +559,7 @@
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7d24ae0..c8fd648 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -612,6 +612,7 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
@@ -619,6 +620,7 @@
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 71468a7..5e17fd1 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -60,6 +60,22 @@
 	rxc-skew-ps = <2000>;
 };
 
+&gpio2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accel1: accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
@@ -68,19 +84,3 @@
 &usb1 {
 	status = "okay";
 };
-
-&gpio2 {
-	status = "okay";
-};
-
-&i2c1{
-	status = "okay";
-
-	accel1: accel1@53{
-		compatible = "adxl34x";
-		reg = <0x53>;
-
-		interrupt-parent = < &portc >;
-		interrupts = <3 2>;
-	};
-};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index d42c84b..e488572 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 9d34292..54bc6d3 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1310 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index b23e05e..c611f56 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1340 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index 13e1aa3..df2232d 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1340 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 40accc8..14594ce 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr13xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index 5de1431..e859e82 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index f79b3df..f4e92e5 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index b096329..070f2c1 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index 9537208..da210b4 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index fdedbb51..1b10344 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index ffea342..22be6e5 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index f0e3fcf..118135d 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr3xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
index 32dd55e..6eaaf63 100644
--- a/arch/arm/boot/dts/ste-ccu8540.dts
+++ b/arch/arm/boot/dts/ste-ccu8540.dts
@@ -17,6 +17,13 @@
 	model = "ST-Ericsson U8540 platform with Device Tree";
 	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index 651c56d..c8b8158 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -16,6 +16,13 @@
 	model = "ST-Ericsson CCU9540 platform with Device Tree";
 	compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 853684a..a75f328 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -971,7 +971,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		uart@80120000 {
+		ux500_serial0: uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -986,7 +986,7 @@
 			status = "disabled";
 		};
 
-		uart@80121000 {
+		ux500_serial1: uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
 			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -1001,7 +1001,7 @@
 			status = "disabled";
 		};
 
-		uart@80007000 {
+		ux500_serial2: uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
 			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 744c1e3..6d8ce15 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -32,11 +32,11 @@
 			status = "okay";
 		};
 
+		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_default_mode>;
 			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
 		};
 
 		uart@80007000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
index 2b1cb5b..18e9795 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -17,6 +17,13 @@
 	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
index 59523f8..2473991 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -16,4 +16,11 @@
 / {
 	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 7f3975b..b0278f4 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -23,6 +23,11 @@
 	};
 
 	soc {
+		/* Enable UART1 on this board */
+		uart@80121000 {
+			status = "okay";
+		};
+
 		i2c@80004000 {
 			tps61052@33 {
 				compatible = "tps61052";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
index 8c6a2de..c2e1ba0 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -19,6 +19,13 @@
 	model = "ST-Ericsson HREF (v60+) and ST UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
index d53cccd..ebd8547 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -18,4 +18,11 @@
 / {
 	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index a4bc9e7..810cda7 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -43,15 +43,26 @@
 				  <&vaudio_hf_hrefv60_mode>,
 				  <&gbf_hrefv60_mode>,
 				  <&hdtv_hrefv60_mode>,
-				  <&touch_hrefv60_mode>;
+				  <&touch_hrefv60_mode>,
+				  <&gpios_hrefv60_mode>;
 
 			sdi0 {
-				/* SD card detect GPIO pin, extend default state */
 				sdi0_default_mode: sdi0_default {
+					/* SD card detect GPIO pin, extend default state */
 					default_hrefv60_cfg1 {
 						pins = "GPIO95_E8";
 						ste,config = <&gpio_in_pu>;
 					};
+					/* VMMCI level-shifter enable */
+					default_hrefv60_cfg2 {
+						pins = "GPIO169_D22";
+						ste,config = <&gpio_out_lo>;
+					};
+					/* VMMCI level-shifter voltage select */
+					default_hrefv60_cfg3 {
+						pins = "GPIO5_AG6";
+						ste,config = <&gpio_out_hi>;
+					};
 				};
 			};
 			ipgpio {
@@ -213,6 +224,16 @@
 					};
 				};
 			};
+			gpios {
+				/* Dangling GPIO pins */
+				gpios_hrefv60_mode: gpios_hrefv60 {
+					default_cfg1 {
+						/* Normally UART1 RXD, now dangling */
+						pins = "GPIO4_AH6";
+						ste,config = <&in_pu>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 9edadc3..32a5ccb 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -18,6 +18,13 @@
 	model = "Calao Systems Snowball platform with device tree";
 	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
@@ -223,11 +230,11 @@
 			status = "okay";
 		};
 
+		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_default_mode>;
 			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
 		};
 
 		uart@80007000 {
@@ -452,7 +459,21 @@
 						pins = "GPIO21_AB3"; /* DAT31DIR */
 						ste,config = <&out_hi>;
 					};
-
+					/* SD card detect GPIO pin, extend default state */
+					snowball_cfg2 {
+						pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+					/* VMMCI level-shifter enable */
+					snowball_cfg3 {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_out_lo>;
+					};
+					/* VMMCI level-shifter voltage select */
+					snowball_cfg4 {
+						pins = "GPIO228_AJ6";
+						ste,config = <&gpio_out_hi>;
+					};
 				};
 			};
 			ssp0 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 107395c..17f63f7 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -150,6 +150,16 @@
 			interface-type = "ace";
 			reg = <0x5000 0x1000>;
 		};
+
+		pmu@9000 {
+			 compatible = "arm,cci-400-pmu,r0";
+			 reg = <0x9000 0x5000>;
+			 interrupts = <0 105 4>,
+				      <0 101 4>,
+				      <0 102 4>,
+				      <0 103 4>,
+				      <0 104 4>;
+		};
 	};
 
 	memory-controller@7ffd0000 {
@@ -187,11 +197,22 @@
 			     <1 10 0xf08>;
 	};
 
-	pmu {
+	pmu_a15 {
 		compatible = "arm,cortex-a15-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>;
+	};
+
+	pmu_a7 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 128 4>,
+			     <0 129 4>,
+			     <0 130 4>;
+		interrupt-affinity = <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>;
 	};
 
 	oscclk6a: oscclk6a {
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 6d83a1b..5fd8df6 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -353,7 +353,6 @@
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_KEYSTONE=y
-CONFIG_POWER_RESET_SUN6I=y
 CONFIG_POWER_RESET_RMOBILE=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 8ecba00..7ebc346b 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -2,6 +2,7 @@
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
@@ -77,7 +78,6 @@
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SUN6I=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
@@ -87,6 +87,10 @@
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_FB=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 83c5019..30b3bc1 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -13,6 +13,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += msgbuf.h
 generic-y += param.h
 generic-y += parport.h
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1c3938f..4859820 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -140,16 +140,11 @@
  * The _caller variety takes a __builtin_return_address(0) value for
  * /proc/vmalloc to use - and should only be used in non-inline functions.
  */
-extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
-	size_t, unsigned int, void *);
 extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int,
 	void *);
-
 extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem *__arm_ioremap(phys_addr_t, size_t, unsigned int);
 extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached);
 extern void __iounmap(volatile void __iomem *addr);
-extern void __arm_iounmap(volatile void __iomem *addr);
 
 extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
 	unsigned int, void *);
@@ -321,21 +316,24 @@
 static inline void memset_io(volatile void __iomem *dst, unsigned c,
 	size_t count)
 {
-	memset((void __force *)dst, c, count);
+	extern void mmioset(void *, unsigned int, size_t);
+	mmioset((void __force *)dst, c, count);
 }
 #define memset_io(dst,c,count) memset_io(dst,c,count)
 
 static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
 	size_t count)
 {
-	memcpy(to, (const void __force *)from, count);
+	extern void mmiocpy(void *, const void *, size_t);
+	mmiocpy(to, (const void __force *)from, count);
 }
 #define memcpy_fromio(to,from,count) memcpy_fromio(to,from,count)
 
 static inline void memcpy_toio(volatile void __iomem *to, const void *from,
 	size_t count)
 {
-	memcpy((void __force *)to, from, count);
+	extern void mmiocpy(void *, const void *, size_t);
+	mmiocpy((void __force *)to, from, count);
 }
 #define memcpy_toio(to,from,count) memcpy_toio(to,from,count)
 
@@ -348,18 +346,61 @@
 #endif	/* readl */
 
 /*
- * ioremap and friends.
+ * ioremap() and friends.
  *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/io-mapping.txt.
+ * ioremap() takes a resource address, and size.  Due to the ARM memory
+ * types, it is important to use the correct ioremap() function as each
+ * mapping has specific properties.
  *
+ * Function		Memory type	Cacheability	Cache hint
+ * ioremap()		Device		n/a		n/a
+ * ioremap_nocache()	Device		n/a		n/a
+ * ioremap_cache()	Normal		Writeback	Read allocate
+ * ioremap_wc()		Normal		Non-cacheable	n/a
+ * ioremap_wt()		Normal		Non-cacheable	n/a
+ *
+ * All device mappings have the following properties:
+ * - no access speculation
+ * - no repetition (eg, on return from an exception)
+ * - number, order and size of accesses are maintained
+ * - unaligned accesses are "unpredictable"
+ * - writes may be delayed before they hit the endpoint device
+ *
+ * ioremap_nocache() is the same as ioremap() as there are too many device
+ * drivers using this for device registers, and documentation which tells
+ * people to use it for such for this to be any different.  This is not a
+ * safe fallback for memory-like mappings, or memory regions where the
+ * compiler may generate unaligned accesses - eg, via inlining its own
+ * memcpy.
+ *
+ * All normal memory mappings have the following properties:
+ * - reads can be repeated with no side effects
+ * - repeated reads return the last value written
+ * - reads can fetch additional locations without side effects
+ * - writes can be repeated (in certain cases) with no side effects
+ * - writes can be merged before accessing the target
+ * - unaligned accesses can be supported
+ * - ordering is not guaranteed without explicit dependencies or barrier
+ *   instructions
+ * - writes may be delayed before they hit the endpoint memory
+ *
+ * The cache hint is only a performance hint: CPUs may alias these hints.
+ * Eg, a CPU not implementing read allocate but implementing write allocate
+ * will provide a write allocate mapping instead.
  */
-#define ioremap(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_cache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE_CACHED)
-#define ioremap_wc(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE_WC)
-#define ioremap_wt(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
-#define iounmap				__arm_iounmap
+void __iomem *ioremap(resource_size_t res_cookie, size_t size);
+#define ioremap ioremap
+#define ioremap_nocache ioremap
+
+void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size);
+#define ioremap_cache ioremap_cache
+
+void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
+#define ioremap_wc ioremap_wc
+#define ioremap_wt ioremap_wc
+
+void iounmap(volatile void __iomem *iomem_cookie);
+#define iounmap iounmap
 
 /*
  * io{read,write}{16,32}be() macros
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 3a72d69..b7f6fb4 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -275,7 +275,7 @@
  */
 #define __pa(x)			__virt_to_phys((unsigned long)(x))
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((phys_addr_t)(pfn) << PAGE_SHIFT)
 
 extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
 
@@ -286,7 +286,7 @@
  */
 static inline phys_addr_t __virt_to_idmap(unsigned long x)
 {
-	if (arch_virt_to_idmap)
+	if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap)
 		return arch_virt_to_idmap(x);
 	else
 		return __virt_to_phys(x);
diff --git a/arch/arm/include/asm/mm-arch-hooks.h b/arch/arm/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 7056660..0000000
--- a/arch/arm/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARM_MM_ARCH_HOOKS_H
-#define _ASM_ARM_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ARM_MM_ARCH_HOOKS_H */
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index bfd662e..aeddd28 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -129,7 +129,36 @@
 
 /*
  * These are the memory types, defined to be compatible with
- * pre-ARMv6 CPUs cacheable and bufferable bits:   XXCB
+ * pre-ARMv6 CPUs cacheable and bufferable bits: n/a,n/a,C,B
+ * ARMv6+ without TEX remapping, they are a table index.
+ * ARMv6+ with TEX remapping, they correspond to n/a,TEX(0),C,B
+ *
+ * MT type		Pre-ARMv6	ARMv6+ type / cacheable status
+ * UNCACHED		Uncached	Strongly ordered
+ * BUFFERABLE		Bufferable	Normal memory / non-cacheable
+ * WRITETHROUGH		Writethrough	Normal memory / write through
+ * WRITEBACK		Writeback	Normal memory / write back, read alloc
+ * MINICACHE		Minicache	N/A
+ * WRITEALLOC		Writeback	Normal memory / write back, write alloc
+ * DEV_SHARED		Uncached	Device memory (shared)
+ * DEV_NONSHARED	Uncached	Device memory (non-shared)
+ * DEV_WC		Bufferable	Normal memory / non-cacheable
+ * DEV_CACHED		Writeback	Normal memory / write back, read alloc
+ * VECTORS		Variable	Normal memory / variable
+ *
+ * All normal memory mappings have the following properties:
+ * - reads can be repeated with no side effects
+ * - repeated reads return the last value written
+ * - reads can fetch additional locations without side effects
+ * - writes can be repeated (in certain cases) with no side effects
+ * - writes can be merged before accessing the target
+ * - unaligned accesses can be supported
+ *
+ * All device mappings have the following properties:
+ * - no access speculation
+ * - no repetition (eg, on return from an exception)
+ * - number, order and size of accesses are maintained
+ * - unaligned accesses are "unpredictable"
  */
 #define L_PTE_MT_UNCACHED	(_AT(pteval_t, 0x00) << 2)	/* 0000 */
 #define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 0x01) << 2)	/* 0001 */
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index a88671c..5e5a51a 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -50,6 +50,9 @@
 
 extern void fpundefinstr(void);
 
+void mmioset(void *, unsigned int, size_t);
+void mmiocpy(void *, const void *, size_t);
+
 	/* platform dependent support */
 EXPORT_SYMBOL(arm_delay_ops);
 
@@ -88,6 +91,9 @@
 EXPORT_SYMBOL(memchr);
 EXPORT_SYMBOL(__memzero);
 
+EXPORT_SYMBOL(mmioset);
+EXPORT_SYMBOL(mmiocpy);
+
 #ifdef CONFIG_MMU
 EXPORT_SYMBOL(copy_page);
 
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7dac308..cb4fb1e 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -410,7 +410,7 @@
 	zero_fp
 
 	.if	\trace
-#ifdef CONFIG_IRQSOFF_TRACER
+#ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
 	ct_user_exit save = 0
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 357f57e..54272e0 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -818,12 +818,13 @@
 			if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL))
 				break;
 
-		of_node_put(dn);
 		if (cpu >= nr_cpu_ids) {
 			pr_warn("Failed to find logical CPU for %s\n",
 				dn->name);
+			of_node_put(dn);
 			break;
 		}
+		of_node_put(dn);
 
 		irqs[i] = cpu;
 		cpumask_set_cpu(cpu, &pmu->supported_cpus);
diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c
index 1a4d232..3826935 100644
--- a/arch/arm/kernel/reboot.c
+++ b/arch/arm/kernel/reboot.c
@@ -50,7 +50,7 @@
 	flush_cache_all();
 
 	/* Switch to the identity mapping. */
-	phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+	phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset);
 	phys_reset((unsigned long)addr);
 
 	/* Should never get here. */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 90dfbed..3d6b782 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -578,7 +578,7 @@
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
 	if ((unsigned)ipinr < NR_IPI) {
-		trace_ipi_entry(ipi_types[ipinr]);
+		trace_ipi_entry_rcuidle(ipi_types[ipinr]);
 		__inc_irq_stat(cpu, ipi_irqs[ipinr]);
 	}
 
@@ -637,7 +637,7 @@
 	}
 
 	if ((unsigned)ipinr < NR_IPI)
-		trace_ipi_exit(ipi_types[ipinr]);
+		trace_ipi_exit_rcuidle(ipi_types[ipinr]);
 	set_irq_regs(old_regs);
 }
 
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index 7797e81..64111bd 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -61,8 +61,10 @@
 
 /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
 
+ENTRY(mmiocpy)
 ENTRY(memcpy)
 
 #include "copy_template.S"
 
 ENDPROC(memcpy)
+ENDPROC(mmiocpy)
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index a4ee97b..3c65e3b 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -16,6 +16,7 @@
 	.text
 	.align	5
 
+ENTRY(mmioset)
 ENTRY(memset)
 UNWIND( .fnstart         )
 	ands	r3, r0, #3		@ 1 unaligned?
@@ -133,3 +134,4 @@
 	b	1b
 UNWIND( .fnend   )
 ENDPROC(memset)
+ENDPROC(mmioset)
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 80bad29..8c4467f 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -291,8 +291,6 @@
 	}
 }
 
-#ifdef CONFIG_PM_GENERIC_DOMAINS
-
 static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
 {
 	int iso, iso2sw;
@@ -399,7 +397,6 @@
 static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 {
 	struct clk *clk;
-	bool is_off;
 	int i;
 
 	imx6q_pu_domain.reg = pu_reg;
@@ -416,18 +413,13 @@
 	}
 	imx6q_pu_domain.num_clks = i;
 
-	is_off = IS_ENABLED(CONFIG_PM);
-	if (is_off) {
-		_imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
-	} else {
-		/*
-		 * Enable power if compiled without CONFIG_PM in case the
-		 * bootloader disabled it.
-		 */
-		imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
-	}
+	/* Enable power always in case bootloader disabled it. */
+	imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
 
-	pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
+	if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
+		return 0;
+
+	pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
 	return of_genpd_add_provider_onecell(dev->of_node,
 					     &imx_gpc_onecell_data);
 
@@ -437,13 +429,6 @@
 	return -EINVAL;
 }
 
-#else
-static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
-{
-	return 0;
-}
-#endif /* CONFIG_PM_GENERIC_DOMAINS */
-
 static int imx_gpc_probe(struct platform_device *pdev)
 {
 	struct regulator *pu_reg;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ecc04ff..4a023e8 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -60,6 +60,7 @@
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
+	select HAVE_ARM_SCU
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index e1a56d8..1ed4be1 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -117,7 +117,6 @@
 	u8 revision = dma_read(REVISION, 0) & 0xff;
 	printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
 				revision >> 4, revision & 0xf);
-	return;
 }
 
 static unsigned configure_dma_errata(void)
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index e03d8b5..9ab8932 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -4,6 +4,7 @@
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
+	select REGMAP
 	select PINCTRL
 	select PINCTRL_SIRF
 	help
diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c
index 8f66d8f..d4852d2 100644
--- a/arch/arm/mach-prima2/rtciobrg.c
+++ b/arch/arm/mach-prima2/rtciobrg.c
@@ -1,5 +1,5 @@
 /*
- * RTC I/O Bridge interfaces for CSR SiRFprimaII
+ * RTC I/O Bridge interfaces for CSR SiRFprimaII/atlas7
  * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
  *
  * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/regmap.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@@ -66,6 +67,7 @@
 {
 	unsigned long flags, val;
 
+	/* TODO: add hwspinlock to sync with M3 */
 	spin_lock_irqsave(&rtciobrg_lock, flags);
 
 	val = __sirfsoc_rtc_iobrg_readl(addr);
@@ -90,6 +92,7 @@
 {
 	unsigned long flags;
 
+	 /* TODO: add hwspinlock to sync with M3 */
 	spin_lock_irqsave(&rtciobrg_lock, flags);
 
 	sirfsoc_rtc_iobrg_pre_writel(val, addr);
@@ -102,6 +105,45 @@
 }
 EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel);
 
+
+static int regmap_iobg_regwrite(void *context, unsigned int reg,
+				   unsigned int val)
+{
+	sirfsoc_rtc_iobrg_writel(val, reg);
+	return 0;
+}
+
+static int regmap_iobg_regread(void *context, unsigned int reg,
+				  unsigned int *val)
+{
+	*val = (u32)sirfsoc_rtc_iobrg_readl(reg);
+	return 0;
+}
+
+static struct regmap_bus regmap_iobg = {
+	.reg_write = regmap_iobg_regwrite,
+	.reg_read = regmap_iobg_regread,
+};
+
+/**
+ * devm_regmap_init_iobg(): Initialise managed register map
+ *
+ * @iobg: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The regmap will be automatically freed by the
+ * device management code.
+ */
+struct regmap *devm_regmap_init_iobg(struct device *dev,
+				    const struct regmap_config *config)
+{
+	const struct regmap_bus *bus = &regmap_iobg;
+
+	return devm_regmap_init(dev, bus, dev, config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_iobg);
+
 static const struct of_device_id rtciobrg_ids[] = {
 	{ .compatible = "sirf,prima2-rtciobg" },
 	{}
@@ -132,7 +174,7 @@
 }
 postcore_initcall(sirfsoc_rtciobrg_init);
 
-MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, "
-		"Barry Song <baohua.song@csr.com>");
+MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>");
+MODULE_AUTHOR("Barry Song <baohua.song@csr.com>");
 MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge");
 MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index c092730..bf366b3 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -24,6 +24,7 @@
 #include <linux/ata_platform.h>
 #include <linux/serial_8250.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -144,6 +145,8 @@
 
 	capc7117_uarts_init();
 	capc7117_ide_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(CAPC7117,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index bb99f59..a17a91e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -13,6 +13,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/dm9000.h>
 #include <linux/leds.h>
@@ -466,6 +467,8 @@
 	cmx2xx_init_ac97();
 	cmx2xx_init_touchscreen();
 	cmx2xx_init_leds();
+
+	regulator_has_full_constraints();
 }
 
 static void __init cmx2xx_init_irq(void)
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 4d3588d..5851f4c 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -835,6 +835,8 @@
 	cm_x300_init_ac97();
 	cm_x300_init_wi2wi();
 	cm_x300_init_bl();
+
+	regulator_has_full_constraints();
 }
 
 static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 5f9d930..3503826 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -18,6 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
 #include <linux/ucb1400.h>
 
 #include <asm/mach/arch.h>
@@ -294,6 +295,8 @@
 		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
 				colibri_pxa270_baseboard);
 	}
+
+	regulator_has_full_constraints();
 }
 
 /* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 51531ec..9d7072b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1306,6 +1306,8 @@
 	em_x270_init_i2c();
 	em_x270_init_camera();
 	em_x270_userspace_consumers_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index c98511c..9b0eb02 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -26,6 +26,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/can/platform/mcp251x.h>
+#include <linux/regulator/machine.h>
 
 #include "generic.h"
 
@@ -185,6 +186,8 @@
 	mxm_8x10_mmc_init();
 
 	icontrol_can_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 872dcb2..066e3a2 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -26,6 +26,7 @@
 #include <linux/dm9000.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/pxa-i2c.h>
 
 #include <asm/types.h>
@@ -534,6 +535,8 @@
 
 	BCR_writew(trizeps_conxs_bcr);
 	board_backlight_power(1);
+
+	regulator_has_full_constraints();
 }
 
 static void __init trizeps4_map_io(void)
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index aa89488..54122a9 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -24,6 +24,7 @@
 #include <linux/dm9000.h>
 #include <linux/ucb1400.h>
 #include <linux/ata_platform.h>
+#include <linux/regulator/machine.h>
 #include <linux/regulator/max1586.h>
 #include <linux/i2c/pxa-i2c.h>
 
@@ -711,6 +712,8 @@
 	vpac270_ts_init();
 	vpac270_rtc_init();
 	vpac270_ide_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(VPAC270, "Voipac PXA270")
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index ac2ae5c..6158566f 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -868,6 +868,8 @@
 	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
 	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
 	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
+
+	regulator_has_full_constraints();
 }
 
 static struct map_desc zeus_io_desc[] __initdata = {
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index a99d90a..0664091 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2009-2012 ST Microelectronics
  * Rajeev Kumar <rajeev-dlh.kumar@st.com>
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h
index 92da0a8..7058720 100644
--- a/arch/arm/mach-spear/include/mach/irqs.h
+++ b/arch/arm/mach-spear/include/mach/irqs.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2009-2012 ST Microelectronics
  * Rajeev Kumar <rajeev-dlh.kumar@st.com>
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/include/mach/misc_regs.h b/arch/arm/mach-spear/include/mach/misc_regs.h
index 935639c..cfaf7c6 100644
--- a/arch/arm/mach-spear/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
  * Miscellaneous registers definitions for SPEAr3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
index f2d6a01..5ed841c 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2009,2012 ST Microelectronics
  * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/include/mach/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h
index 51b2dc9..8439b9c 100644
--- a/arch/arm/mach-spear/include/mach/uncompress.h
+++ b/arch/arm/mach-spear/include/mach/uncompress.h
@@ -4,7 +4,7 @@
  * Serial port stubs for kernel decompress status messages
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/pl080.c b/arch/arm/mach-spear/pl080.c
index cfa1199..b4529f3 100644
--- a/arch/arm/mach-spear/pl080.c
+++ b/arch/arm/mach-spear/pl080.c
@@ -4,7 +4,7 @@
  * DMAC pl080 definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/pl080.h b/arch/arm/mach-spear/pl080.h
index eb6590d..608dec6 100644
--- a/arch/arm/mach-spear/pl080.h
+++ b/arch/arm/mach-spear/pl080.h
@@ -4,7 +4,7 @@
  * DMAC pl080 definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/restart.c b/arch/arm/mach-spear/restart.c
index ce5e098c..b434215 100644
--- a/arch/arm/mach-spear/restart.c
+++ b/arch/arm/mach-spear/restart.c
@@ -4,7 +4,7 @@
  * SPEAr platform specific restart functions
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index d9ce4d8..cd5d375 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -4,7 +4,7 @@
  * SPEAr1310 machine source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 3f3c0f1..94594d5 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -4,7 +4,7 @@
  * SPEAr1340 machine source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 2e463a9..b7afce6 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -4,7 +4,7 @@
  * SPEAr13XX machines common source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c
index b52e48f..5b32edd 100644
--- a/arch/arm/mach-spear/spear300.c
+++ b/arch/arm/mach-spear/spear300.c
@@ -4,7 +4,7 @@
  * SPEAr300 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c
index ed2029d..86a44ac 100644
--- a/arch/arm/mach-spear/spear310.c
+++ b/arch/arm/mach-spear/spear310.c
@@ -4,7 +4,7 @@
  * SPEAr310 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c
index bf634b3..d45d751 100644
--- a/arch/arm/mach-spear/spear320.c
+++ b/arch/arm/mach-spear/spear320.c
@@ -4,7 +4,7 @@
  * SPEAr320 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
index bf3b1fd..23394ac 100644
--- a/arch/arm/mach-spear/spear3xx.c
+++ b/arch/arm/mach-spear/spear3xx.c
@@ -4,7 +4,7 @@
  * SPEAr3XX machines common source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 81502b9..4efe2d4 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -35,7 +35,7 @@
 	select SUN5I_HSTIMER
 
 config MACH_SUN8I
-	bool "Allwinner A23 (sun8i) SoCs support"
+	bool "Allwinner sun8i Family SoCs support"
 	default ARCH_SUNXI
 	select ARM_GIC
 	select MFD_SUN6I_PRCM
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 1bc811a..65bab28 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -67,10 +67,13 @@
 
 static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
+	"allwinner,sun8i-a33",
+	"allwinner,sun8i-h3",
 	NULL,
 };
 
-DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family")
+DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family")
+	.init_time	= sun6i_timer_init,
 	.dt_compat	= sun8i_board_dt_compat,
 	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 1ced8a0..cba12f3 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1971,7 +1971,7 @@
 {
 	int next_bitmap;
 
-	if (mapping->nr_bitmaps > mapping->extensions)
+	if (mapping->nr_bitmaps >= mapping->extensions)
 		return -EINVAL;
 
 	next_bitmap = mapping->nr_bitmaps;
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index d1e5ad7..0c81056 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -255,7 +255,7 @@
 }
 #endif
 
-void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
+static void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	unsigned long offset, size_t size, unsigned int mtype, void *caller)
 {
 	const struct mem_type *type;
@@ -363,7 +363,7 @@
 		  unsigned int mtype)
 {
 	return __arm_ioremap_pfn_caller(pfn, offset, size, mtype,
-			__builtin_return_address(0));
+					__builtin_return_address(0));
 }
 EXPORT_SYMBOL(__arm_ioremap_pfn);
 
@@ -371,13 +371,26 @@
 				      unsigned int, void *) =
 	__arm_ioremap_caller;
 
-void __iomem *
-__arm_ioremap(phys_addr_t phys_addr, size_t size, unsigned int mtype)
+void __iomem *ioremap(resource_size_t res_cookie, size_t size)
 {
-	return arch_ioremap_caller(phys_addr, size, mtype,
-		__builtin_return_address(0));
+	return arch_ioremap_caller(res_cookie, size, MT_DEVICE,
+				   __builtin_return_address(0));
 }
-EXPORT_SYMBOL(__arm_ioremap);
+EXPORT_SYMBOL(ioremap);
+
+void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size)
+{
+	return arch_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED,
+				   __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_cache);
+
+void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size)
+{
+	return arch_ioremap_caller(res_cookie, size, MT_DEVICE_WC,
+				   __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_wc);
 
 /*
  * Remap an arbitrary physical address space into the kernel virtual
@@ -431,11 +444,11 @@
 
 void (*arch_iounmap)(volatile void __iomem *) = __iounmap;
 
-void __arm_iounmap(volatile void __iomem *io_addr)
+void iounmap(volatile void __iomem *cookie)
 {
-	arch_iounmap(io_addr);
+	arch_iounmap(cookie);
 }
-EXPORT_SYMBOL(__arm_iounmap);
+EXPORT_SYMBOL(iounmap);
 
 #ifdef CONFIG_PCI
 static int pci_ioremap_mem_type = MT_DEVICE;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6ca7d9a..870838a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1072,6 +1072,7 @@
 	int highmem = 0;
 	phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
 	struct memblock_region *reg;
+	bool should_use_highmem = false;
 
 	for_each_memblock(memory, reg) {
 		phys_addr_t block_start = reg->base;
@@ -1090,6 +1091,7 @@
 				pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n",
 					  &block_start, &block_end);
 				memblock_remove(reg->base, reg->size);
+				should_use_highmem = true;
 				continue;
 			}
 
@@ -1100,6 +1102,7 @@
 					  &block_start, &block_end, &vmalloc_limit);
 				memblock_remove(vmalloc_limit, overlap_size);
 				block_end = vmalloc_limit;
+				should_use_highmem = true;
 			}
 		}
 
@@ -1134,6 +1137,9 @@
 		}
 	}
 
+	if (should_use_highmem)
+		pr_notice("Consider using a HIGHMEM enabled kernel.\n");
+
 	high_memory = __va(arm_lowmem_limit - 1) + 1;
 
 	/*
@@ -1494,6 +1500,7 @@
 	build_mem_type_table();
 	prepare_page_table();
 	map_lowmem();
+	memblock_set_current_limit(arm_lowmem_limit);
 	dma_contiguous_remap();
 	devicemaps_init(mdesc);
 	kmap_init();
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index afd7e05..1dd1093 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -351,30 +351,43 @@
 }
 EXPORT_SYMBOL(__arm_ioremap_pfn);
 
-void __iomem *__arm_ioremap_pfn_caller(unsigned long pfn, unsigned long offset,
-			   size_t size, unsigned int mtype, void *caller)
-{
-	return __arm_ioremap_pfn(pfn, offset, size, mtype);
-}
-
-void __iomem *__arm_ioremap(phys_addr_t phys_addr, size_t size,
-			    unsigned int mtype)
-{
-	return (void __iomem *)phys_addr;
-}
-EXPORT_SYMBOL(__arm_ioremap);
-
-void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *);
-
 void __iomem *__arm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 				   unsigned int mtype, void *caller)
 {
-	return __arm_ioremap(phys_addr, size, mtype);
+	return (void __iomem *)phys_addr;
 }
 
+void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *);
+
+void __iomem *ioremap(resource_size_t res_cookie, size_t size)
+{
+	return __arm_ioremap_caller(res_cookie, size, MT_DEVICE,
+				    __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap);
+
+void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size)
+{
+	return __arm_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED,
+				    __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_cache);
+
+void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size)
+{
+	return __arm_ioremap_caller(res_cookie, size, MT_DEVICE_WC,
+				    __builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_wc);
+
+void __iounmap(volatile void __iomem *addr)
+{
+}
+EXPORT_SYMBOL(__iounmap);
+
 void (*arch_iounmap)(volatile void __iomem *);
 
-void __arm_iounmap(volatile void __iomem *addr)
+void iounmap(volatile void __iomem *addr)
 {
 }
-EXPORT_SYMBOL(__arm_iounmap);
+EXPORT_SYMBOL(iounmap);
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 0716bbe..de2b246 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -274,7 +274,10 @@
 __v7_b15mp_setup:
 __v7_ca17mp_setup:
 	mov	r10, #0
-1:
+1:	adr	r12, __v7_setup_stack		@ the local stack
+	stmia	r12, {r0-r5, lr}		@ v7_invalidate_l1 touches r0-r6
+	bl      v7_invalidate_l1
+	ldmia	r12, {r0-r5, lr}
 #ifdef CONFIG_SMP
 	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)
 	ALT_UP(mov	r0, #(1 << 6))		@ fake it for UP
@@ -283,7 +286,7 @@
 	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
 	mcreq	p15, 0, r0, c1, c0, 1
 #endif
-	b	__v7_setup
+	b	__v7_setup_cont
 
 /*
  * Errata:
@@ -413,10 +416,11 @@
 
 __v7_setup:
 	adr	r12, __v7_setup_stack		@ the local stack
-	stmia	r12, {r0-r5, r7, r9, r11, lr}
+	stmia	r12, {r0-r5, lr}		@ v7_invalidate_l1 touches r0-r6
 	bl      v7_invalidate_l1
-	ldmia	r12, {r0-r5, r7, r9, r11, lr}
+	ldmia	r12, {r0-r5, lr}
 
+__v7_setup_cont:
 	and	r0, r9, #0xff000000		@ ARM?
 	teq	r0, #0x41000000
 	bne	__errata_finish
@@ -480,7 +484,7 @@
 
 	.align	2
 __v7_setup_stack:
-	.space	4 * 11				@ 11 registers
+	.space	4 * 7				@ 12 registers
 
 	__INITDATA
 
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 4550d24..c011e22 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -74,32 +74,52 @@
 
 int bpf_jit_enable __read_mostly;
 
-static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset)
+static inline int call_neg_helper(struct sk_buff *skb, int offset, void *ret,
+		      unsigned int size)
+{
+	void *ptr = bpf_internal_load_pointer_neg_helper(skb, offset, size);
+
+	if (!ptr)
+		return -EFAULT;
+	memcpy(ret, ptr, size);
+	return 0;
+}
+
+static u64 jit_get_skb_b(struct sk_buff *skb, int offset)
 {
 	u8 ret;
 	int err;
 
-	err = skb_copy_bits(skb, offset, &ret, 1);
+	if (offset < 0)
+		err = call_neg_helper(skb, offset, &ret, 1);
+	else
+		err = skb_copy_bits(skb, offset, &ret, 1);
 
 	return (u64)err << 32 | ret;
 }
 
-static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset)
+static u64 jit_get_skb_h(struct sk_buff *skb, int offset)
 {
 	u16 ret;
 	int err;
 
-	err = skb_copy_bits(skb, offset, &ret, 2);
+	if (offset < 0)
+		err = call_neg_helper(skb, offset, &ret, 2);
+	else
+		err = skb_copy_bits(skb, offset, &ret, 2);
 
 	return (u64)err << 32 | ntohs(ret);
 }
 
-static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset)
+static u64 jit_get_skb_w(struct sk_buff *skb, int offset)
 {
 	u32 ret;
 	int err;
 
-	err = skb_copy_bits(skb, offset, &ret, 4);
+	if (offset < 0)
+		err = call_neg_helper(skb, offset, &ret, 4);
+	else
+		err = skb_copy_bits(skb, offset, &ret, 4);
 
 	return (u64)err << 32 | ntohl(ret);
 }
@@ -536,9 +556,6 @@
 		case BPF_LD | BPF_B | BPF_ABS:
 			load_order = 0;
 load:
-			/* the interpreter will deal with the negative K */
-			if ((int)k < 0)
-				return -ENOTSUPP;
 			emit_mov_i(r_off, k, ctx);
 load_common:
 			ctx->seen |= SEEN_DATA | SEEN_CALL;
@@ -547,12 +564,24 @@
 				emit(ARM_SUB_I(r_scratch, r_skb_hl,
 					       1 << load_order), ctx);
 				emit(ARM_CMP_R(r_scratch, r_off), ctx);
-				condt = ARM_COND_HS;
+				condt = ARM_COND_GE;
 			} else {
 				emit(ARM_CMP_R(r_skb_hl, r_off), ctx);
 				condt = ARM_COND_HI;
 			}
 
+			/*
+			 * test for negative offset, only if we are
+			 * currently scheduled to take the fast
+			 * path. this will update the flags so that
+			 * the slowpath instruction are ignored if the
+			 * offset is negative.
+			 *
+			 * for loard_order == 0 the HI condition will
+			 * make loads at offset 0 take the slow path too.
+			 */
+			_emit(condt, ARM_CMP_I(r_off, 0), ctx);
+
 			_emit(condt, ARM_ADD_R(r_scratch, r_off, r_skb_data),
 			      ctx);
 
@@ -860,9 +889,11 @@
 			off = offsetof(struct sk_buff, vlan_tci);
 			emit(ARM_LDRH_I(r_A, r_skb, off), ctx);
 			if (code == (BPF_ANC | SKF_AD_VLAN_TAG))
-				OP_IMM3(ARM_AND, r_A, r_A, VLAN_VID_MASK, ctx);
-			else
-				OP_IMM3(ARM_AND, r_A, r_A, VLAN_TAG_PRESENT, ctx);
+				OP_IMM3(ARM_AND, r_A, r_A, ~VLAN_TAG_PRESENT, ctx);
+			else {
+				OP_IMM3(ARM_LSR, r_A, r_A, 12, ctx);
+				OP_IMM3(ARM_AND, r_A, r_A, 0x1, ctx);
+			}
 			break;
 		case BPF_ANC | SKF_AD_QUEUE:
 			ctx->seen |= SEEN_SKB;
diff --git a/arch/arm/vdso/vdsomunge.c b/arch/arm/vdso/vdsomunge.c
index 9005b07..aedec81 100644
--- a/arch/arm/vdso/vdsomunge.c
+++ b/arch/arm/vdso/vdsomunge.c
@@ -45,13 +45,11 @@
  * it does.
  */
 
-#define _GNU_SOURCE
-
 #include <byteswap.h>
 #include <elf.h>
 #include <errno.h>
-#include <error.h>
 #include <fcntl.h>
+#include <stdarg.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <stdlib.h>
@@ -82,11 +80,25 @@
 #define EF_ARM_ABI_FLOAT_HARD 0x400
 #endif
 
+static int failed;
+static const char *argv0;
 static const char *outfile;
 
+static void fail(const char *fmt, ...)
+{
+	va_list ap;
+
+	failed = 1;
+	fprintf(stderr, "%s: ", argv0);
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	exit(EXIT_FAILURE);
+}
+
 static void cleanup(void)
 {
-	if (error_message_count > 0 && outfile != NULL)
+	if (failed && outfile != NULL)
 		unlink(outfile);
 }
 
@@ -119,68 +131,66 @@
 	int infd;
 
 	atexit(cleanup);
+	argv0 = argv[0];
 
 	if (argc != 3)
-		error(EXIT_FAILURE, 0, "Usage: %s [infile] [outfile]", argv[0]);
+		fail("Usage: %s [infile] [outfile]\n", argv[0]);
 
 	infile = argv[1];
 	outfile = argv[2];
 
 	infd = open(infile, O_RDONLY);
 	if (infd < 0)
-		error(EXIT_FAILURE, errno, "Cannot open %s", infile);
+		fail("Cannot open %s: %s\n", infile, strerror(errno));
 
 	if (fstat(infd, &stat) != 0)
-		error(EXIT_FAILURE, errno, "Failed stat for %s", infile);
+		fail("Failed stat for %s: %s\n", infile, strerror(errno));
 
 	inbuf = mmap(NULL, stat.st_size, PROT_READ, MAP_PRIVATE, infd, 0);
 	if (inbuf == MAP_FAILED)
-		error(EXIT_FAILURE, errno, "Failed to map %s", infile);
+		fail("Failed to map %s: %s\n", infile, strerror(errno));
 
 	close(infd);
 
 	inhdr = inbuf;
 
 	if (memcmp(&inhdr->e_ident, ELFMAG, SELFMAG) != 0)
-		error(EXIT_FAILURE, 0, "Not an ELF file");
+		fail("Not an ELF file\n");
 
 	if (inhdr->e_ident[EI_CLASS] != ELFCLASS32)
-		error(EXIT_FAILURE, 0, "Unsupported ELF class");
+		fail("Unsupported ELF class\n");
 
 	swap = inhdr->e_ident[EI_DATA] != HOST_ORDER;
 
 	if (read_elf_half(inhdr->e_type, swap) != ET_DYN)
-		error(EXIT_FAILURE, 0, "Not a shared object");
+		fail("Not a shared object\n");
 
-	if (read_elf_half(inhdr->e_machine, swap) != EM_ARM) {
-		error(EXIT_FAILURE, 0, "Unsupported architecture %#x",
-		      inhdr->e_machine);
-	}
+	if (read_elf_half(inhdr->e_machine, swap) != EM_ARM)
+		fail("Unsupported architecture %#x\n", inhdr->e_machine);
 
 	e_flags = read_elf_word(inhdr->e_flags, swap);
 
 	if (EF_ARM_EABI_VERSION(e_flags) != EF_ARM_EABI_VER5) {
-		error(EXIT_FAILURE, 0, "Unsupported EABI version %#x",
-		      EF_ARM_EABI_VERSION(e_flags));
+		fail("Unsupported EABI version %#x\n",
+		     EF_ARM_EABI_VERSION(e_flags));
 	}
 
 	if (e_flags & EF_ARM_ABI_FLOAT_HARD)
-		error(EXIT_FAILURE, 0,
-		      "Unexpected hard-float flag set in e_flags");
+		fail("Unexpected hard-float flag set in e_flags\n");
 
 	clear_soft_float = !!(e_flags & EF_ARM_ABI_FLOAT_SOFT);
 
 	outfd = open(outfile, O_RDWR | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR);
 	if (outfd < 0)
-		error(EXIT_FAILURE, errno, "Cannot open %s", outfile);
+		fail("Cannot open %s: %s\n", outfile, strerror(errno));
 
 	if (ftruncate(outfd, stat.st_size) != 0)
-		error(EXIT_FAILURE, errno, "Cannot truncate %s", outfile);
+		fail("Cannot truncate %s: %s\n", outfile, strerror(errno));
 
 	outbuf = mmap(NULL, stat.st_size, PROT_READ | PROT_WRITE, MAP_SHARED,
 		      outfd, 0);
 	if (outbuf == MAP_FAILED)
-		error(EXIT_FAILURE, errno, "Failed to map %s", outfile);
+		fail("Failed to map %s: %s\n", outfile, strerror(errno));
 
 	close(outfd);
 
@@ -195,7 +205,7 @@
 	}
 
 	if (msync(outbuf, stat.st_size, MS_SYNC) != 0)
-		error(EXIT_FAILURE, errno, "Failed to sync %s", outfile);
+		fail("Failed to sync %s: %s\n", outfile, strerror(errno));
 
 	return EXIT_SUCCESS;
 }
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 0f6edb1..318175f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -23,9 +23,9 @@
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
-	select EDAC_SUPPORT
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS
+	select EDAC_SUPPORT
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
index 83578e7..4c55833 100644
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -23,6 +23,16 @@
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		button@1 {
+			label = "POWER";
+			linux,code = <116>;
+			linux,input-type = <0x1>;
+			interrupts = <0x0 0x2d 0x1>;
+		};
+	};
 };
 
 &pcie0clk {
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index c5c98b9..bb3c072 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -1,6 +1,7 @@
 dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
new file mode 100644
index 0000000..5b1d018
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -0,0 +1,191 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * LogicTile Express 20MG
+ * V2F-1XV7
+ *
+ * Cortex-A53 (2 cores) Soft Macrocell Model
+ *
+ * HBI-0247C
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "V2F-1XV7 Cortex-A53x2 SMM";
+	arm,hbi = <0x247>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		stdout-path = "serial0:38400n8";
+	};
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		smbclk: osc@4 {
+			/* SMC clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "smclk";
+		};
+
+		volt@0 {
+			/* VIO to expansion board above */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VIO_UP";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		volt@1 {
+			/* 12V from power connector J6 */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "12";
+			regulator-always-on;
+		};
+
+		temp@0 {
+			/* FPGA temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "FPGA";
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		/include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi"
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index d8c0bdc..9cb7cf94 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -376,10 +376,19 @@
 		gic0: interrupt-controller@8010,00000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
 			interrupt-controller;
 			reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
 			      <0x8010 0x80000000 0x0 0x600000>; /* GICR */
 			interrupts = <1 9 0xf04>;
+
+			its: gic-its@8010,00020000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				reg = <0x8010 0x20000 0x0 0x200000>;
+			};
 		};
 
 		uaa0: serial@87e0,24000000 {
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f38c94f..4e17e7e 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -83,6 +83,7 @@
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_CEVA=y
 CONFIG_AHCI_XGENE=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index b112a39..70fd9ff 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -25,6 +25,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += msi.h
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index 39248d3..406485e 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -19,6 +19,14 @@
 #include <asm/psci.h>
 #include <asm/smp_plat.h>
 
+/* Macros for consistency checks of the GICC subtable of MADT */
+#define ACPI_MADT_GICC_LENGTH	\
+	(acpi_gbl_FADT.header.revision < 6 ? 76 : 80)
+
+#define BAD_MADT_GICC_ENTRY(entry, end)						\
+	(!(entry) || (unsigned long)(entry) + sizeof(*(entry)) > (end) ||	\
+	 (entry)->header.length != ACPI_MADT_GICC_LENGTH)
+
 /* Basic configuration for ACPI */
 #ifdef	CONFIG_ACPI
 /* ACPI table mapping after acpi_gbl_permanent_mmap is set */
diff --git a/arch/arm64/include/asm/mm-arch-hooks.h b/arch/arm64/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 562b655..0000000
--- a/arch/arm64/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARM64_MM_ARCH_HOOKS_H
-#define _ASM_ARM64_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ARM64_MM_ARCH_HOOKS_H */
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
index 9d4aa18..e8ca6ea 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@@ -122,12 +122,12 @@
 
 	/* Show what we know for posterity */
 	c16 = early_memremap(efi_to_phys(efi.systab->fw_vendor),
-			     sizeof(vendor));
+			     sizeof(vendor) * sizeof(efi_char16_t));
 	if (c16) {
 		for (i = 0; i < (int) sizeof(vendor) - 1 && *c16; ++i)
 			vendor[i] = c16[i];
 		vendor[i] = '\0';
-		early_memunmap(c16, sizeof(vendor));
+		early_memunmap(c16, sizeof(vendor) * sizeof(efi_char16_t));
 	}
 
 	pr_info("EFI v%u.%.02u by %s\n",
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index a7691a3..e163518 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -352,8 +352,8 @@
 	// TODO: add support for undefined instructions in kernel mode
 	enable_dbg
 	mov	x0, sp
+	mov	x2, x1
 	mov	x1, #BAD_SYNC
-	mrs	x2, esr_el1
 	b	bad_mode
 ENDPROC(el1_sync)
 
@@ -553,7 +553,7 @@
 	ct_user_exit
 	mov	x0, sp
 	mov	x1, #BAD_SYNC
-	mrs	x2, esr_el1
+	mov	x2, x25
 	bl	bad_mode
 	b	ret_to_user
 ENDPROC(el0_sync)
@@ -585,7 +585,8 @@
  *
  */
 ENTRY(cpu_switch_to)
-	add	x8, x0, #THREAD_CPU_CONTEXT
+	mov	x10, #THREAD_CPU_CONTEXT
+	add	x8, x0, x10
 	mov	x9, sp
 	stp	x19, x20, [x8], #16		// store callee-saved registers
 	stp	x21, x22, [x8], #16
@@ -594,7 +595,7 @@
 	stp	x27, x28, [x8], #16
 	stp	x29, x9, [x8], #16
 	str	lr, [x8]
-	add	x8, x1, #THREAD_CPU_CONTEXT
+	add	x8, x1, x10
 	ldp	x19, x20, [x8], #16		// restore callee-saved registers
 	ldp	x21, x22, [x8], #16
 	ldp	x23, x24, [x8], #16
diff --git a/arch/arm64/kernel/entry32.S b/arch/arm64/kernel/entry32.S
index bd9bfaa..f332d5d 100644
--- a/arch/arm64/kernel/entry32.S
+++ b/arch/arm64/kernel/entry32.S
@@ -32,13 +32,11 @@
 
 ENTRY(compat_sys_sigreturn_wrapper)
 	mov	x0, sp
-	mov	x27, #0		// prevent syscall restart handling (why)
 	b	compat_sys_sigreturn
 ENDPROC(compat_sys_sigreturn_wrapper)
 
 ENTRY(compat_sys_rt_sigreturn_wrapper)
 	mov	x0, sp
-	mov	x27, #0		// prevent syscall restart handling (why)
 	b	compat_sys_rt_sigreturn
 ENDPROC(compat_sys_rt_sigreturn_wrapper)
 
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 240b75c..463fa2e 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -61,7 +61,7 @@
 static bool migrate_one_irq(struct irq_desc *desc)
 {
 	struct irq_data *d = irq_desc_get_irq_data(desc);
-	const struct cpumask *affinity = d->affinity;
+	const struct cpumask *affinity = irq_data_get_affinity_mask(d);
 	struct irq_chip *c;
 	bool ret = false;
 
@@ -81,7 +81,7 @@
 	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
 	else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
-		cpumask_copy(d->affinity, affinity);
+		cpumask_copy(irq_data_get_affinity_mask(d), affinity);
 
 	return ret;
 }
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 695801a..50fb469 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -438,7 +438,7 @@
 	struct acpi_madt_generic_interrupt *processor;
 
 	processor = (struct acpi_madt_generic_interrupt *)header;
-	if (BAD_MADT_ENTRY(processor, end))
+	if (BAD_MADT_GICC_ENTRY(processor, end))
 		return -EINVAL;
 
 	acpi_table_print_madt_entry(header);
diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
index 9d84feb..773d37a 100644
--- a/arch/arm64/mm/Makefile
+++ b/arch/arm64/mm/Makefile
@@ -4,5 +4,3 @@
 				   context.o proc.o pageattr.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_ARM64_PTDUMP)	+= dump.o
-
-CFLAGS_mmu.o			:= -I$(srctree)/scripts/dtc/libfdt/
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index 1d66afd..f61f2dd 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -12,6 +12,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += param.h
 generic-y += percpu.h
 generic-y += preempt.h
diff --git a/arch/avr32/include/asm/mm-arch-hooks.h b/arch/avr32/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 145452f..0000000
--- a/arch/avr32/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_AVR32_MM_ARCH_HOOKS_H
-#define _ASM_AVR32_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_AVR32_MM_ARCH_HOOKS_H */
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index d0f771b..a124c55 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -18,6 +18,7 @@
 
 #include <mach/pm.h>
 
+static bool disable_cpu_idle_poll;
 
 static cycle_t read_cycle_count(struct clocksource *cs)
 {
@@ -80,45 +81,45 @@
 	return 0;
 }
 
-static void comparator_mode(enum clock_event_mode mode,
-		struct clock_event_device *evdev)
+static int comparator_shutdown(struct clock_event_device *evdev)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		pr_debug("%s: start\n", evdev->name);
-		/* FALLTHROUGH */
-	case CLOCK_EVT_MODE_RESUME:
+	pr_debug("%s: %s\n", __func__, evdev->name);
+	sysreg_write(COMPARE, 0);
+
+	if (disable_cpu_idle_poll) {
+		disable_cpu_idle_poll = false;
 		/*
-		 * If we're using the COUNT and COMPARE registers we
-		 * need to force idle poll.
+		 * Only disable idle poll if we have forced that
+		 * in a previous call.
 		 */
-		cpu_idle_poll_ctrl(true);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		sysreg_write(COMPARE, 0);
-		pr_debug("%s: stop\n", evdev->name);
-		if (evdev->mode == CLOCK_EVT_MODE_ONESHOT ||
-		    evdev->mode == CLOCK_EVT_MODE_RESUME) {
-			/*
-			 * Only disable idle poll if we have forced that
-			 * in a previous call.
-			 */
-			cpu_idle_poll_ctrl(false);
-		}
-		break;
-	default:
-		BUG();
+		cpu_idle_poll_ctrl(false);
 	}
+	return 0;
+}
+
+static int comparator_set_oneshot(struct clock_event_device *evdev)
+{
+	pr_debug("%s: %s\n", __func__, evdev->name);
+
+	disable_cpu_idle_poll = true;
+	/*
+	 * If we're using the COUNT and COMPARE registers we
+	 * need to force idle poll.
+	 */
+	cpu_idle_poll_ctrl(true);
+
+	return 0;
 }
 
 static struct clock_event_device comparator = {
-	.name		= "avr32_comparator",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 16,
-	.rating		= 50,
-	.set_next_event	= comparator_next_event,
-	.set_mode	= comparator_mode,
+	.name			= "avr32_comparator",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.shift			= 16,
+	.rating			= 50,
+	.set_next_event		= comparator_next_event,
+	.set_state_shutdown	= comparator_shutdown,
+	.set_state_oneshot	= comparator_set_oneshot,
+	.tick_resume		= comparator_set_oneshot,
 };
 
 void read_persistent_clock(struct timespec *ts)
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 23b1a97..52c179b 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -80,6 +80,9 @@
 {
 	unsigned long flags;
 
+	if (!clk)
+		return 0;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	__clk_enable(clk);
 	spin_unlock_irqrestore(&clk_lock, flags);
@@ -106,6 +109,9 @@
 {
 	unsigned long flags;
 
+	if (IS_ERR_OR_NULL(clk))
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	__clk_disable(clk);
 	spin_unlock_irqrestore(&clk_lock, flags);
@@ -117,6 +123,9 @@
 	unsigned long flags;
 	unsigned long rate;
 
+	if (!clk)
+		return 0;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	rate = clk->get_rate(clk);
 	spin_unlock_irqrestore(&clk_lock, flags);
@@ -129,6 +138,9 @@
 {
 	unsigned long flags, actual_rate;
 
+	if (!clk)
+		return 0;
+
 	if (!clk->set_rate)
 		return -ENOSYS;
 
@@ -145,6 +157,9 @@
 	unsigned long flags;
 	long ret;
 
+	if (!clk)
+		return 0;
+
 	if (!clk->set_rate)
 		return -ENOSYS;
 
@@ -161,6 +176,9 @@
 	unsigned long flags;
 	int ret;
 
+	if (!clk)
+		return 0;
+
 	if (!clk->set_parent)
 		return -ENOSYS;
 
@@ -174,7 +192,7 @@
 
 struct clk *clk_get_parent(struct clk *clk)
 {
-	return clk->parent;
+	return !clk ? NULL : clk->parent;
 }
 EXPORT_SYMBOL(clk_get_parent);
 
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index 07051a6..61cd1e7 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -21,6 +21,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += mutex.h
diff --git a/arch/blackfin/include/asm/mm-arch-hooks.h b/arch/blackfin/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 1c5211e..0000000
--- a/arch/blackfin/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_BLACKFIN_MM_ARCH_HOOKS_H
-#define _ASM_BLACKFIN_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_BLACKFIN_MM_ARCH_HOOKS_H */
diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild
index 7aeb322..f17c4dc 100644
--- a/arch/c6x/include/asm/Kbuild
+++ b/arch/c6x/include/asm/Kbuild
@@ -26,6 +26,7 @@
 generic-y += kmap_types.h
 generic-y += local.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += mmu.h
 generic-y += mmu_context.h
diff --git a/arch/c6x/include/asm/mm-arch-hooks.h b/arch/c6x/include/asm/mm-arch-hooks.h
deleted file mode 100644
index bb3c4a6..0000000
--- a/arch/c6x/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_C6X_MM_ARCH_HOOKS_H
-#define _ASM_C6X_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_C6X_MM_ARCH_HOOKS_H */
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index 4dda9bd..e989cee 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -1464,7 +1464,7 @@
 		if (port->write_ts_idx == NBR_IN_DESCR)
 			port->write_ts_idx = 0;
 		idx = port->write_ts_idx++;
-		do_posix_clock_monotonic_gettime(&port->timestamp[idx]);
+		ktime_get_ts(&port->timestamp[idx]);
 		port->in_buffer_len += port->inbufchunk;
 	}
 	spin_unlock_irqrestore(&port->lock, flags);
diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild
index d294f6a..ad2244f 100644
--- a/arch/cris/include/asm/Kbuild
+++ b/arch/cris/include/asm/Kbuild
@@ -18,6 +18,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += module.h
 generic-y += percpu.h
 generic-y += preempt.h
diff --git a/arch/cris/include/asm/mm-arch-hooks.h b/arch/cris/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 314f774..0000000
--- a/arch/cris/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_CRIS_MM_ARCH_HOOKS_H
-#define _ASM_CRIS_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_CRIS_MM_ARCH_HOOKS_H */
diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild
index 30edce3..8e47b83 100644
--- a/arch/frv/include/asm/Kbuild
+++ b/arch/frv/include/asm/Kbuild
@@ -4,5 +4,6 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += trace_clock.h
diff --git a/arch/frv/include/asm/mm-arch-hooks.h b/arch/frv/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 51d13a8..0000000
--- a/arch/frv/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_FRV_MM_ARCH_HOOKS_H
-#define _ASM_FRV_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_FRV_MM_ARCH_HOOKS_H */
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
index 00379d6..70e6ae1 100644
--- a/arch/h8300/include/asm/Kbuild
+++ b/arch/h8300/include/asm/Kbuild
@@ -33,6 +33,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += mmu.h
 generic-y += mmu_context.h
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index 5ade4a1..daee37b 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -28,6 +28,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += pci.h
diff --git a/arch/hexagon/include/asm/mm-arch-hooks.h b/arch/hexagon/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 05e8b93..0000000
--- a/arch/hexagon/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_HEXAGON_MM_ARCH_HOOKS_H
-#define _ASM_HEXAGON_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_HEXAGON_MM_ARCH_HOOKS_H */
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index ccff13d..9de3ba1 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -4,6 +4,7 @@
 generic-y += irq_work.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += trace_clock.h
 generic-y += vtime.h
diff --git a/arch/ia64/include/asm/mm-arch-hooks.h b/arch/ia64/include/asm/mm-arch-hooks.h
deleted file mode 100644
index ab4b5c6..0000000
--- a/arch/ia64/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_IA64_MM_ARCH_HOOKS_H
-#define _ASM_IA64_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_IA64_MM_ARCH_HOOKS_H */
diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild
index ba1cdc0..e0eb704 100644
--- a/arch/m32r/include/asm/Kbuild
+++ b/arch/m32r/include/asm/Kbuild
@@ -4,6 +4,7 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += module.h
 generic-y += preempt.h
 generic-y += sections.h
diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h
index 0c3f25e..f8de767 100644
--- a/arch/m32r/include/asm/io.h
+++ b/arch/m32r/include/asm/io.h
@@ -174,6 +174,11 @@
 #define iowrite16 writew
 #define iowrite32 writel
 
+#define ioread16be(addr)	be16_to_cpu(readw(addr))
+#define ioread32be(addr)	be32_to_cpu(readl(addr))
+#define iowrite16be(v, addr)	writew(cpu_to_be16(v), (addr))
+#define iowrite32be(v, addr)	writel(cpu_to_be32(v), (addr))
+
 #define mmiowb()
 
 #define flush_write_buffers() do { } while (0)  /* M32R_FIXME */
diff --git a/arch/m32r/include/asm/mm-arch-hooks.h b/arch/m32r/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 6d60b47..0000000
--- a/arch/m32r/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_M32R_MM_ARCH_HOOKS_H
-#define _ASM_M32R_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_M32R_MM_ARCH_HOOKS_H */
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 33013df..c496d48 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -125,6 +125,13 @@
 
 if COLDFIRE
 
+choice
+	prompt "ColdFire SoC type"
+	default M520x
+	help
+	  Select the type of ColdFire System-on-Chip (SoC) that you want
+	  to build for.
+
 config M5206
 	bool "MCF5206"
 	depends on !MMU
@@ -174,9 +181,6 @@
 	help
 	  Freescale (Motorola) Coldfire 5251/5253 processor support.
 
-config M527x
-	bool
-
 config M5271
 	bool "MCF5271"
 	depends on !MMU
@@ -223,9 +227,6 @@
 	help
 	  Motorola ColdFire 5307 processor support.
 
-config M53xx
-	bool
-
 config M532x
 	bool "MCF532x"
 	depends on !MMU
@@ -251,9 +252,6 @@
 	help
 	  Motorola ColdFire 5407 processor support.
 
-config M54xx
-	bool
-
 config M547x
 	bool "MCF547x"
 	select M54xx
@@ -280,6 +278,17 @@
 	help
 	  Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
 
+endchoice
+
+config M527x
+	bool
+
+config M53xx
+	bool
+
+config M54xx
+	bool
+
 endif # COLDFIRE
 
 
@@ -416,22 +425,18 @@
 config HAVE_IPSBAR
 	bool
 
-config CLOCK_SET
-	bool "Enable setting the CPU clock frequency"
-	depends on COLDFIRE
-	default n
-	help
-	  On some CPU's you do not need to know what the core CPU clock
-	  frequency is. On these you can disable clock setting. On some
-	  traditional 68K parts, and on all ColdFire parts you need to set
-	  the appropriate CPU clock frequency. On these devices many of the
-	  onboard peripherals derive their timing from the master CPU clock
-	  frequency.
-
 config CLOCK_FREQ
 	int "Set the core clock frequency"
+	default "25000000" if M5206
+	default "54000000" if M5206e
+	default "166666666" if M520x
+	default "140000000" if M5249
+	default "150000000" if M527x || M523x
+	default "90000000" if M5307
+	default "50000000" if M5407
+	default "266000000" if M54xx
 	default "66666666"
-	depends on CLOCK_SET
+	depends on COLDFIRE
 	help
 	  Define the CPU clock frequency in use. This is the core clock
 	  frequency, it may or may not be the same as the external clock
diff --git a/arch/m68k/configs/m5208evb_defconfig b/arch/m68k/configs/m5208evb_defconfig
index e7292f4..4c7b793 100644
--- a/arch/m68k/configs/m5208evb_defconfig
+++ b/arch/m68k/configs/m5208evb_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,17 +12,12 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_M520x=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=166666666
-CONFIG_CLOCK_DIV=2
-CONFIG_M5208EVB=y
+# CONFIG_MMU is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_RAMBASE=0x40000000
 CONFIG_RAMSIZE=0x2000000
 CONFIG_VECTORBASE=0x40000000
 CONFIG_KERNELBASE=0x40020000
-CONFIG_RAM16BIT=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -40,24 +31,19 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=115200
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
@@ -68,8 +54,6 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_FULLDEBUG=y
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+CONFIG_FULLDEBUG=y
diff --git a/arch/m68k/configs/m5249evb_defconfig b/arch/m68k/configs/m5249evb_defconfig
index 0cd4b39..a782f36 100644
--- a/arch/m68k/configs/m5249evb_defconfig
+++ b/arch/m68k/configs/m5249evb_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,10 +12,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5249=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=140000000
-CONFIG_CLOCK_DIV=2
 CONFIG_M5249C3=y
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00800000
@@ -38,23 +32,18 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
@@ -62,7 +51,5 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5272c3_defconfig b/arch/m68k/configs/m5272c3_defconfig
index a60cb35..6f5fb92 100644
--- a/arch/m68k/configs/m5272c3_defconfig
+++ b/arch/m68k/configs/m5272c3_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,8 +12,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5272=y
-CONFIG_CLOCK_SET=y
 CONFIG_M5272C3=y
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00800000
@@ -36,23 +32,18 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
@@ -61,6 +52,5 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
diff --git a/arch/m68k/configs/m5275evb_defconfig b/arch/m68k/configs/m5275evb_defconfig
index e6502ab..b5d7cd1 100644
--- a/arch/m68k/configs/m5275evb_defconfig
+++ b/arch/m68k/configs/m5275evb_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,11 +12,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5275=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=150000000
-CONFIG_CLOCK_DIV=2
-CONFIG_M5275EVB=y
 # CONFIG_4KSTACKS is not set
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00000000
@@ -39,24 +32,19 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
@@ -65,8 +53,5 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5307c3_defconfig b/arch/m68k/configs/m5307c3_defconfig
index 023812a..1b4c094 100644
--- a/arch/m68k/configs/m5307c3_defconfig
+++ b/arch/m68k/configs/m5307c3_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,10 +12,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5307=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=90000000
-CONFIG_CLOCK_DIV=2
 CONFIG_M5307C3=y
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00800000
@@ -38,16 +32,11 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y
 CONFIG_SLIP=y
 CONFIG_SLIP_COMPRESSED=y
@@ -56,21 +45,17 @@
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_FULLDEBUG=y
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
+CONFIG_FULLDEBUG=y
diff --git a/arch/m68k/configs/m5407c3_defconfig b/arch/m68k/configs/m5407c3_defconfig
index 557b39f..275ad543 100644
--- a/arch/m68k/configs/m5407c3_defconfig
+++ b/arch/m68k/configs/m5407c3_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -17,9 +13,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5407=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=50000000
 CONFIG_M5407C3=y
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00000000
@@ -38,22 +33,17 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y
 # CONFIG_INPUT is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
@@ -63,8 +53,5 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5475evb_defconfig b/arch/m68k/configs/m5475evb_defconfig
index c5018a6..4f4ccd13 100644
--- a/arch/m68k/configs/m5475evb_defconfig
+++ b/arch/m68k/configs/m5475evb_defconfig
@@ -1,11 +1,7 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -20,19 +16,16 @@
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_COLDFIRE=y
-CONFIG_M547x=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=266000000
 # CONFIG_4KSTACKS is not set
 CONFIG_RAMBASE=0x0
 CONFIG_RAMSIZE=0x2000000
 CONFIG_VECTORBASE=0x0
 CONFIG_MBAR=0xff000000
 CONFIG_KERNELBASE=0x20000
+CONFIG_PCI=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index 1555bc1..eb85bd9 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -18,6 +18,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += mutex.h
 generic-y += percpu.h
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
index c94557b..50aa4da 100644
--- a/arch/m68k/include/asm/coldfire.h
+++ b/arch/m68k/include/asm/coldfire.h
@@ -19,7 +19,7 @@
  *	in any case new boards come along from time to time that have yet
  *	another different clocking frequency.
  */
-#ifdef CONFIG_CLOCK_SET
+#ifdef CONFIG_CLOCK_FREQ
 #define	MCF_CLK		CONFIG_CLOCK_FREQ
 #else
 #error "Don't know what your ColdFire CPU clock frequency is??"
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index 618c85d3..f55cad5 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -413,7 +413,8 @@
 #define writew(val, addr)	out_le16((addr), (val))
 #endif /* CONFIG_ATARI_ROM_ISA */
 
-#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA)
+#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA) && \
+    !(defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE))
 /*
  * We need to define dummy functions for GENERIC_IOMAP support.
  */
diff --git a/arch/m68k/include/asm/mm-arch-hooks.h b/arch/m68k/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 7e8709b..0000000
--- a/arch/m68k/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_M68K_MM_ARCH_HOOKS_H
-#define _ASM_M68K_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_M68K_MM_ARCH_HOOKS_H */
diff --git a/arch/metag/include/asm/Kbuild b/arch/metag/include/asm/Kbuild
index 199320f..df31353 100644
--- a/arch/metag/include/asm/Kbuild
+++ b/arch/metag/include/asm/Kbuild
@@ -25,6 +25,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += msgbuf.h
 generic-y += mutex.h
 generic-y += param.h
diff --git a/arch/metag/include/asm/mm-arch-hooks.h b/arch/metag/include/asm/mm-arch-hooks.h
deleted file mode 100644
index b0072b2..0000000
--- a/arch/metag/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_METAG_MM_ARCH_HOOKS_H
-#define _ASM_METAG_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_METAG_MM_ARCH_HOOKS_H */
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
index 9989ddb..2f222f3 100644
--- a/arch/microblaze/include/asm/Kbuild
+++ b/arch/microblaze/include/asm/Kbuild
@@ -6,6 +6,7 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += syscalls.h
 generic-y += trace_clock.h
diff --git a/arch/microblaze/include/asm/mm-arch-hooks.h b/arch/microblaze/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 5c40659..0000000
--- a/arch/microblaze/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_MICROBLAZE_MM_ARCH_HOOKS_H
-#define _ASM_MICROBLAZE_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_MICROBLAZE_MM_ARCH_HOOKS_H */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2a14585..cee5f93 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1427,6 +1427,7 @@
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_MSA
 	select GENERIC_CSUM
+	select MIPS_O32_FP64_SUPPORT if MIPS32_O32
 	help
 	  Choose this option to build a kernel for release 6 or later of the
 	  MIPS64 architecture.  New MIPS processors, starting with the Warrior
@@ -2231,7 +2232,7 @@
 
 config MIPS_CPS
 	bool "MIPS Coherent Processing System support"
-	depends on SYS_SUPPORTS_MIPS_CPS && !64BIT
+	depends on SYS_SUPPORTS_MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPC
 	select MIPS_CPS_PM if HOTPLUG_CPU
@@ -2262,11 +2263,6 @@
 config MIPS_CPC
 	bool
 
-config SB1_PASS_1_WORKAROUNDS
-	bool
-	depends on CPU_SB1_PASS_1
-	default y
-
 config SB1_PASS_2_WORKAROUNDS
 	bool
 	depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ae2dd59..252e347 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -181,13 +181,6 @@
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
 
-ifdef CONFIG_CPU_SB1
-ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
-KBUILD_AFLAGS_MODULE += -msb1-pass1-workarounds
-KBUILD_CFLAGS_MODULE += -msb1-pass1-workarounds
-endif
-endif
-
 # For smartmips configurations, there are hundreds of warnings due to ISA overrides
 # in assembly and header files. smartmips is only supported for MIPS32r1 onwards
 # and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 7fe5c61..1f85460 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -7,6 +7,7 @@
 generic-y += irq_work.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mutex.h
 generic-y += parport.h
 generic-y += percpu.h
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index 084780b..1b06251 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -74,7 +74,7 @@
 		goto fr_common;
 
 	case FPU_64BIT:
-#if !(defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS32_R6) \
+#if !(defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) \
       || defined(CONFIG_64BIT))
 		/* we only have a 32-bit FPU */
 		return SIGFPE;
diff --git a/arch/mips/include/asm/mach-loongson64/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h
index 37c08a2..c9f7e23 100644
--- a/arch/mips/include/asm/mach-loongson64/mmzone.h
+++ b/arch/mips/include/asm/mach-loongson64/mmzone.h
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
- *                    Insititute of Computing Technology
+ *                    Institute of Computing Technology
  * Author:  Xiang Gao, gaoxiang@ict.ac.cn
  *          Huacai Chen, chenhc@lemote.com
  *          Xiaofu Meng, Shuangshuang Zhang
diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h
index 0a227d4..520f8fc 100644
--- a/arch/mips/include/asm/mach-sibyte/war.h
+++ b/arch/mips/include/asm/mach-sibyte/war.h
@@ -13,8 +13,7 @@
 #define R4600_V2_HIT_CACHEOP_WAR	0
 #define R5432_CP0_INTERRUPT_WAR		0
 
-#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
-    defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
+#if defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
 
 #ifndef __ASSEMBLY__
 extern int sb1250_m3_workaround_needed(void);
diff --git a/arch/mips/include/asm/mm-arch-hooks.h b/arch/mips/include/asm/mm-arch-hooks.h
deleted file mode 100644
index b5609fe..0000000
--- a/arch/mips/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_MIPS_MM_ARCH_HOOKS_H
-#define _ASM_MIPS_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_MIPS_MM_ARCH_HOOKS_H */
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 2b25d1b..16f1ea9 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -23,6 +23,7 @@
 extern int smp_num_siblings;
 extern cpumask_t cpu_sibling_map[];
 extern cpumask_t cpu_core_map[];
+extern cpumask_t cpu_foreign_map;
 
 #define raw_smp_processor_id() (current_thread_info()->cpu)
 
diff --git a/arch/mips/include/uapi/asm/sigcontext.h b/arch/mips/include/uapi/asm/sigcontext.h
index 6c9906f..9081d88 100644
--- a/arch/mips/include/uapi/asm/sigcontext.h
+++ b/arch/mips/include/uapi/asm/sigcontext.h
@@ -16,7 +16,7 @@
 
 /*
  * Keep this struct definition in sync with the sigcontext fragment
- * in arch/mips/tools/offset.c
+ * in arch/mips/kernel/asm-offsets.c
  */
 struct sigcontext {
 	unsigned int		sc_regmask;	/* Unused */
@@ -46,7 +46,7 @@
 #include <linux/posix_types.h>
 /*
  * Keep this struct definition in sync with the sigcontext fragment
- * in arch/mips/tools/offset.c
+ * in arch/mips/kernel/asm-offsets.c
  *
  * Warning: this structure illdefined with sc_badvaddr being just an unsigned
  * int so it was changed to unsigned long in 2.6.0-test1.  This may break
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index beabe19..072fab1 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -1,5 +1,5 @@
 /*
- * offset.c: Calculate pt_regs and task_struct offsets.
+ * asm-offsets.c: Calculate pt_regs and task_struct offsets.
  *
  * Copyright (C) 1996 David S. Miller
  * Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003 Ralf Baechle
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index c0c5e59..d8f9b35 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -600,7 +600,7 @@
 		break;
 
 	case blezl_op: /* not really i_format */
-		if (NO_R6EMU)
+		if (!insn.i_format.rt && NO_R6EMU)
 			goto sigill_r6;
 	case blez_op:
 		/*
@@ -635,7 +635,7 @@
 		break;
 
 	case bgtzl_op:
-		if (NO_R6EMU)
+		if (!insn.i_format.rt && NO_R6EMU)
 			goto sigill_r6;
 	case bgtz_op:
 		/*
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index 55b759a..1b6ca63 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -60,7 +60,7 @@
 	 nop
 
 	/* This is an NMI */
-	la	k0, nmi_handler
+	PTR_LA	k0, nmi_handler
 	jr	k0
 	 nop
 
@@ -107,10 +107,10 @@
 	mul	t1, t1, t0
 	mul	t1, t1, t2
 
-	li	a0, KSEG0
-	add	a1, a0, t1
+	li	a0, CKSEG0
+	PTR_ADD	a1, a0, t1
 1:	cache	Index_Store_Tag_I, 0(a0)
-	add	a0, a0, t0
+	PTR_ADD	a0, a0, t0
 	bne	a0, a1, 1b
 	 nop
 icache_done:
@@ -134,12 +134,12 @@
 	mul	t1, t1, t0
 	mul	t1, t1, t2
 
-	li	a0, KSEG0
-	addu	a1, a0, t1
-	subu	a1, a1, t0
+	li	a0, CKSEG0
+	PTR_ADDU a1, a0, t1
+	PTR_SUBU a1, a1, t0
 1:	cache	Index_Store_Tag_D, 0(a0)
 	bne	a0, a1, 1b
-	 add	a0, a0, t0
+	 PTR_ADD a0, a0, t0
 dcache_done:
 
 	/* Set Kseg0 CCA to that in s0 */
@@ -152,11 +152,11 @@
 
 	/* Enter the coherent domain */
 	li	t0, 0xff
-	sw	t0, GCR_CL_COHERENCE_OFS(v1)
+	PTR_S	t0, GCR_CL_COHERENCE_OFS(v1)
 	ehb
 
 	/* Jump to kseg0 */
-	la	t0, 1f
+	PTR_LA	t0, 1f
 	jr	t0
 	 nop
 
@@ -178,9 +178,9 @@
 	 nop
 
 	/* Off we go! */
-	lw	t1, VPEBOOTCFG_PC(v0)
-	lw	gp, VPEBOOTCFG_GP(v0)
-	lw	sp, VPEBOOTCFG_SP(v0)
+	PTR_L	t1, VPEBOOTCFG_PC(v0)
+	PTR_L	gp, VPEBOOTCFG_GP(v0)
+	PTR_L	sp, VPEBOOTCFG_SP(v0)
 	jr	t1
 	 nop
 	END(mips_cps_core_entry)
@@ -217,7 +217,7 @@
 
 .org 0x480
 LEAF(excep_ejtag)
-	la	k0, ejtag_debug_handler
+	PTR_LA	k0, ejtag_debug_handler
 	jr	k0
 	 nop
 	END(excep_ejtag)
@@ -229,7 +229,7 @@
 	 nop
 
 	.set	push
-	.set	mips32r2
+	.set	mips64r2
 	.set	mt
 
 	/* Only allow 1 TC per VPE to execute... */
@@ -237,7 +237,7 @@
 
 	/* ...and for the moment only 1 VPE */
 	dvpe
-	la	t1, 1f
+	PTR_LA	t1, 1f
 	jr.hb	t1
 	 nop
 
@@ -250,25 +250,25 @@
 	mfc0	t0, CP0_MVPCONF0
 	srl	t0, t0, MVPCONF0_PVPE_SHIFT
 	andi	t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
-	addiu	t7, t0, 1
+	addiu	ta3, t0, 1
 
 	/* If there's only 1, we're done */
 	beqz	t0, 2f
 	 nop
 
 	/* Loop through each VPE within this core */
-	li	t5, 1
+	li	ta1, 1
 
 1:	/* Operate on the appropriate TC */
-	mtc0	t5, CP0_VPECONTROL
+	mtc0	ta1, CP0_VPECONTROL
 	ehb
 
 	/* Bind TC to VPE (1:1 TC:VPE mapping) */
-	mttc0	t5, CP0_TCBIND
+	mttc0	ta1, CP0_TCBIND
 
 	/* Set exclusive TC, non-active, master */
 	li	t0, VPECONF0_MVP
-	sll	t1, t5, VPECONF0_XTC_SHIFT
+	sll	t1, ta1, VPECONF0_XTC_SHIFT
 	or	t0, t0, t1
 	mttc0	t0, CP0_VPECONF0
 
@@ -280,8 +280,8 @@
 	mttc0	t0, CP0_TCHALT
 
 	/* Next VPE */
-	addiu	t5, t5, 1
-	slt	t0, t5, t7
+	addiu	ta1, ta1, 1
+	slt	t0, ta1, ta3
 	bnez	t0, 1b
 	 nop
 
@@ -298,19 +298,19 @@
 
 LEAF(mips_cps_boot_vpes)
 	/* Retrieve CM base address */
-	la	t0, mips_cm_base
-	lw	t0, 0(t0)
+	PTR_LA	t0, mips_cm_base
+	PTR_L	t0, 0(t0)
 
 	/* Calculate a pointer to this cores struct core_boot_config */
-	lw	t0, GCR_CL_ID_OFS(t0)
+	PTR_L	t0, GCR_CL_ID_OFS(t0)
 	li	t1, COREBOOTCFG_SIZE
 	mul	t0, t0, t1
-	la	t1, mips_cps_core_bootcfg
-	lw	t1, 0(t1)
-	addu	t0, t0, t1
+	PTR_LA	t1, mips_cps_core_bootcfg
+	PTR_L	t1, 0(t1)
+	PTR_ADDU t0, t0, t1
 
 	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
-	has_mt	t6, 1f
+	has_mt	ta2, 1f
 	 li	t9, 0
 
 	/* Find the number of VPEs present in the core */
@@ -334,24 +334,24 @@
 1:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
 	li	t1, VPEBOOTCFG_SIZE
 	mul	v0, t9, t1
-	lw	t7, COREBOOTCFG_VPECONFIG(t0)
-	addu	v0, v0, t7
+	PTR_L	ta3, COREBOOTCFG_VPECONFIG(t0)
+	PTR_ADDU v0, v0, ta3
 
 #ifdef CONFIG_MIPS_MT
 
 	/* If the core doesn't support MT then return */
-	bnez	t6, 1f
+	bnez	ta2, 1f
 	 nop
 	jr	ra
 	 nop
 
 	.set	push
-	.set	mips32r2
+	.set	mips64r2
 	.set	mt
 
 1:	/* Enter VPE configuration state */
 	dvpe
-	la	t1, 1f
+	PTR_LA	t1, 1f
 	jr.hb	t1
 	 nop
 1:	mfc0	t1, CP0_MVPCONTROL
@@ -360,12 +360,12 @@
 	ehb
 
 	/* Loop through each VPE */
-	lw	t6, COREBOOTCFG_VPEMASK(t0)
-	move	t8, t6
-	li	t5, 0
+	PTR_L	ta2, COREBOOTCFG_VPEMASK(t0)
+	move	t8, ta2
+	li	ta1, 0
 
 	/* Check whether the VPE should be running. If not, skip it */
-1:	andi	t0, t6, 1
+1:	andi	t0, ta2, 1
 	beqz	t0, 2f
 	 nop
 
@@ -373,7 +373,7 @@
 	mfc0	t0, CP0_VPECONTROL
 	ori	t0, t0, VPECONTROL_TARGTC
 	xori	t0, t0, VPECONTROL_TARGTC
-	or	t0, t0, t5
+	or	t0, t0, ta1
 	mtc0	t0, CP0_VPECONTROL
 	ehb
 
@@ -384,8 +384,8 @@
 
 	/* Calculate a pointer to the VPEs struct vpe_boot_config */
 	li	t0, VPEBOOTCFG_SIZE
-	mul	t0, t0, t5
-	addu	t0, t0, t7
+	mul	t0, t0, ta1
+	addu	t0, t0, ta3
 
 	/* Set the TC restart PC */
 	lw	t1, VPEBOOTCFG_PC(t0)
@@ -423,9 +423,9 @@
 	mttc0	t0, CP0_VPECONF0
 
 	/* Next VPE */
-2:	srl	t6, t6, 1
-	addiu	t5, t5, 1
-	bnez	t6, 1b
+2:	srl	ta2, ta2, 1
+	addiu	ta1, ta1, 1
+	bnez	ta2, 1b
 	 nop
 
 	/* Leave VPE configuration state */
@@ -445,7 +445,7 @@
 	/* This VPE should be offline, halt the TC */
 	li	t0, TCHALT_H
 	mtc0	t0, CP0_TCHALT
-	la	t0, 1f
+	PTR_LA	t0, 1f
 1:	jr.hb	t0
 	 nop
 
@@ -466,10 +466,10 @@
 	.set	noat
 	lw	$1, TI_CPU(gp)
 	sll	$1, $1, LONGLOG
-	la	\dest, __per_cpu_offset
+	PTR_LA	\dest, __per_cpu_offset
 	addu	$1, $1, \dest
 	lw	$1, 0($1)
-	la	\dest, cps_cpu_state
+	PTR_LA	\dest, cps_cpu_state
 	addu	\dest, \dest, $1
 	.set	pop
 	.endm
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 6e8de80..4cc1350 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -73,10 +73,11 @@
 	.set    noreorder
 	.set	nomacro
 
-1:	user_lw(t5, 16(t0))		# argument #5 from usp
-4:	user_lw(t6, 20(t0))		# argument #6 from usp
-3:	user_lw(t7, 24(t0))		# argument #7 from usp
-2:	user_lw(t8, 28(t0))		# argument #8 from usp
+load_a4: user_lw(t5, 16(t0))		# argument #5 from usp
+load_a5: user_lw(t6, 20(t0))		# argument #6 from usp
+load_a6: user_lw(t7, 24(t0))		# argument #7 from usp
+load_a7: user_lw(t8, 28(t0))		# argument #8 from usp
+loads_done:
 
 	sw	t5, 16(sp)		# argument #5 to ksp
 	sw	t6, 20(sp)		# argument #6 to ksp
@@ -85,10 +86,10 @@
 	.set	pop
 
 	.section __ex_table,"a"
-	PTR	1b,bad_stack
-	PTR	2b,bad_stack
-	PTR	3b,bad_stack
-	PTR	4b,bad_stack
+	PTR	load_a4, bad_stack_a4
+	PTR	load_a5, bad_stack_a5
+	PTR	load_a6, bad_stack_a6
+	PTR	load_a7, bad_stack_a7
 	.previous
 
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
@@ -153,8 +154,8 @@
 /* ------------------------------------------------------------------------ */
 
 	/*
-	 * The stackpointer for a call with more than 4 arguments is bad.
-	 * We probably should handle this case a bit more drastic.
+	 * Our open-coded access area sanity test for the stack pointer
+	 * failed. We probably should handle this case a bit more drastic.
 	 */
 bad_stack:
 	li	v0, EFAULT
@@ -163,6 +164,22 @@
 	sw	t0, PT_R7(sp)
 	j	o32_syscall_exit
 
+bad_stack_a4:
+	li	t5, 0
+	b	load_a5
+
+bad_stack_a5:
+	li	t6, 0
+	b	load_a6
+
+bad_stack_a6:
+	li	t7, 0
+	b	load_a7
+
+bad_stack_a7:
+	li	t8, 0
+	b	loads_done
+
 	/*
 	 * The system call does not exist in this kernel
 	 */
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index d07b210..f543ff4 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -69,16 +69,17 @@
 	daddu	t1, t0, 32
 	bltz	t1, bad_stack
 
-1:	lw	a4, 16(t0)		# argument #5 from usp
-2:	lw	a5, 20(t0)		# argument #6 from usp
-3:	lw	a6, 24(t0)		# argument #7 from usp
-4:	lw	a7, 28(t0)		# argument #8 from usp (for indirect syscalls)
+load_a4: lw	a4, 16(t0)		# argument #5 from usp
+load_a5: lw	a5, 20(t0)		# argument #6 from usp
+load_a6: lw	a6, 24(t0)		# argument #7 from usp
+load_a7: lw	a7, 28(t0)		# argument #8 from usp
+loads_done:
 
 	.section __ex_table,"a"
-	PTR	1b, bad_stack
-	PTR	2b, bad_stack
-	PTR	3b, bad_stack
-	PTR	4b, bad_stack
+	PTR	load_a4, bad_stack_a4
+	PTR	load_a5, bad_stack_a5
+	PTR	load_a6, bad_stack_a6
+	PTR	load_a7, bad_stack_a7
 	.previous
 
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
@@ -167,6 +168,22 @@
 	sd	t0, PT_R7(sp)
 	j	o32_syscall_exit
 
+bad_stack_a4:
+	li	a4, 0
+	b	load_a5
+
+bad_stack_a5:
+	li	a5, 0
+	b	load_a6
+
+bad_stack_a6:
+	li	a6, 0
+	b	load_a7
+
+bad_stack_a7:
+	li	a7, 0
+	b	loads_done
+
 not_o32_scall:
 	/*
 	 * This is not an o32 compatibility syscall, pass it on
@@ -383,7 +400,7 @@
 	PTR	sys_connect			/* 4170 */
 	PTR	sys_getpeername
 	PTR	sys_getsockname
-	PTR	sys_getsockopt
+	PTR	compat_sys_getsockopt
 	PTR	sys_listen
 	PTR	compat_sys_recv			/* 4175 */
 	PTR	compat_sys_recvfrom
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index be73c49..008b337 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -337,6 +337,11 @@
 			min_low_pfn = start;
 		if (end <= reserved_end)
 			continue;
+#ifdef CONFIG_BLK_DEV_INITRD
+		/* mapstart should be after initrd_end */
+		if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end)))
+			continue;
+#endif
 		if (start >= mapstart)
 			continue;
 		mapstart = max(reserved_end, start);
@@ -366,14 +371,6 @@
 		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 	}
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	/*
-	 * mapstart should be after initrd_end
-	 */
-	if (initrd_end)
-		mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
-#endif
-
 	/*
 	 * Initialize the boot-time allocator with low memory only.
 	 */
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index 4251d39..c889377 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -133,7 +133,7 @@
 	/*
 	 * Patch the start of mips_cps_core_entry to provide:
 	 *
-	 * v0 = CM base address
+	 * v1 = CM base address
 	 * s0 = kseg0 CCA
 	 */
 	entry_code = (u32 *)&mips_cps_core_entry;
@@ -369,7 +369,7 @@
 
 static void wait_for_sibling_halt(void *ptr_cpu)
 {
-	unsigned cpu = (unsigned)ptr_cpu;
+	unsigned cpu = (unsigned long)ptr_cpu;
 	unsigned vpe_id = cpu_vpe_id(&cpu_data[cpu]);
 	unsigned halted;
 	unsigned long flags;
@@ -430,7 +430,7 @@
 		 */
 		err = smp_call_function_single(cpu_death_sibling,
 					       wait_for_sibling_halt,
-					       (void *)cpu, 1);
+					       (void *)(unsigned long)cpu, 1);
 		if (err)
 			panic("Failed to call remote sibling CPU\n");
 	}
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index faa46eb..d0744cc 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -63,6 +63,13 @@
 cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_core_map);
 
+/*
+ * A logcal cpu mask containing only one VPE per core to
+ * reduce the number of IPIs on large MT systems.
+ */
+cpumask_t cpu_foreign_map __read_mostly;
+EXPORT_SYMBOL(cpu_foreign_map);
+
 /* representing cpus for which sibling maps can be computed */
 static cpumask_t cpu_sibling_setup_map;
 
@@ -103,6 +110,29 @@
 	}
 }
 
+/*
+ * Calculate a new cpu_foreign_map mask whenever a
+ * new cpu appears or disappears.
+ */
+static inline void calculate_cpu_foreign_map(void)
+{
+	int i, k, core_present;
+	cpumask_t temp_foreign_map;
+
+	/* Re-calculate the mask */
+	for_each_online_cpu(i) {
+		core_present = 0;
+		for_each_cpu(k, &temp_foreign_map)
+			if (cpu_data[i].package == cpu_data[k].package &&
+			    cpu_data[i].core == cpu_data[k].core)
+				core_present = 1;
+		if (!core_present)
+			cpumask_set_cpu(i, &temp_foreign_map);
+	}
+
+	cpumask_copy(&cpu_foreign_map, &temp_foreign_map);
+}
+
 struct plat_smp_ops *mp_ops;
 EXPORT_SYMBOL(mp_ops);
 
@@ -146,6 +176,8 @@
 	set_cpu_sibling_map(cpu);
 	set_cpu_core_map(cpu);
 
+	calculate_cpu_foreign_map();
+
 	cpumask_set_cpu(cpu, &cpu_callin_map);
 
 	synchronise_count_slave(cpu);
@@ -173,9 +205,18 @@
 static void stop_this_cpu(void *dummy)
 {
 	/*
-	 * Remove this CPU:
+	 * Remove this CPU. Be a bit slow here and
+	 * set the bits for every online CPU so we don't miss
+	 * any IPI whilst taking this VPE down.
 	 */
+
+	cpumask_copy(&cpu_foreign_map, cpu_online_mask);
+
+	/* Make it visible to every other CPU */
+	smp_mb();
+
 	set_cpu_online(smp_processor_id(), false);
+	calculate_cpu_foreign_map();
 	local_irq_disable();
 	while (1);
 }
@@ -197,6 +238,7 @@
 	mp_ops->prepare_cpus(max_cpus);
 	set_cpu_sibling_map(0);
 	set_cpu_core_map(0);
+	calculate_cpu_foreign_map();
 #ifndef CONFIG_HOTPLUG_CPU
 	init_cpu_present(cpu_possible_mask);
 #endif
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 2a7b38e..e207a43 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2130,10 +2130,10 @@
 	BUG_ON(current->mm);
 	enter_lazy_tlb(&init_mm, current);
 
-		/* Boot CPU's cache setup in setup_arch(). */
-		if (!is_boot_cpu)
-			cpu_cache_init();
-		tlb_init();
+	/* Boot CPU's cache setup in setup_arch(). */
+	if (!is_boot_cpu)
+		cpu_cache_init();
+	tlb_init();
 	TLBMISS_HANDLER_SETUP();
 }
 
diff --git a/arch/mips/loongson64/common/bonito-irq.c b/arch/mips/loongson64/common/bonito-irq.c
index cc0e4fd..4e116d2 100644
--- a/arch/mips/loongson64/common/bonito-irq.c
+++ b/arch/mips/loongson64/common/bonito-irq.c
@@ -3,7 +3,7 @@
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
  *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
  *  This program is free software; you can redistribute	 it and/or modify it
diff --git a/arch/mips/loongson64/common/cmdline.c b/arch/mips/loongson64/common/cmdline.c
index 72fed00..01fbed1 100644
--- a/arch/mips/loongson64/common/cmdline.c
+++ b/arch/mips/loongson64/common/cmdline.c
@@ -6,7 +6,7 @@
  * Copyright 2003 ICT CAS
  * Author: Michael Guo <guoyi@ict.ac.cn>
  *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
  * Copyright (C) 2009 Lemote Inc.
diff --git a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c
index 12c75db..8750370 100644
--- a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c
@@ -1,7 +1,7 @@
 /*
  * CS5536 General timer functions
  *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
  * Author: Yanhua, yanh@lemote.com
  *
  * Copyright (C) 2009 Lemote Inc.
diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/common/env.c
index 22f04ca..f6c44dd 100644
--- a/arch/mips/loongson64/common/env.c
+++ b/arch/mips/loongson64/common/env.c
@@ -6,7 +6,7 @@
  * Copyright 2003 ICT CAS
  * Author: Michael Guo <guoyi@ict.ac.cn>
  *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
  * Copyright (C) 2009 Lemote Inc.
diff --git a/arch/mips/loongson64/common/irq.c b/arch/mips/loongson64/common/irq.c
index 687003b..d36d969 100644
--- a/arch/mips/loongson64/common/irq.c
+++ b/arch/mips/loongson64/common/irq.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
  *  This program is free software; you can redistribute	 it and/or modify it
diff --git a/arch/mips/loongson64/common/setup.c b/arch/mips/loongson64/common/setup.c
index d477dd6..2dc5122 100644
--- a/arch/mips/loongson64/common/setup.c
+++ b/arch/mips/loongson64/common/setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
  *  This program is free software; you can redistribute	 it and/or modify it
diff --git a/arch/mips/loongson64/fuloong-2e/irq.c b/arch/mips/loongson64/fuloong-2e/irq.c
index ef5ec8f..892963f8 100644
--- a/arch/mips/loongson64/fuloong-2e/irq.c
+++ b/arch/mips/loongson64/fuloong-2e/irq.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
  *  This program is free software; you can redistribute	 it and/or modify it
diff --git a/arch/mips/loongson64/lemote-2f/clock.c b/arch/mips/loongson64/lemote-2f/clock.c
index 462e34d..a78fb65 100644
--- a/arch/mips/loongson64/lemote-2f/clock.c
+++ b/arch/mips/loongson64/lemote-2f/clock.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2006 - 2008 Lemote Inc. & Institute of Computing Technology
  * Author: Yanhua, yanh@lemote.com
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -15,7 +15,7 @@
 #include <linux/spinlock.h>
 
 #include <asm/clock.h>
-#include <asm/mach-loongson/loongson.h>
+#include <asm/mach-loongson64/loongson.h>
 
 static LIST_HEAD(clock_list);
 static DEFINE_SPINLOCK(clock_lock);
diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/loongson-3/numa.c
index 12d14ed..6f9e010 100644
--- a/arch/mips/loongson64/loongson-3/numa.c
+++ b/arch/mips/loongson64/loongson-3/numa.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
- *                    Insititute of Computing Technology
+ *                    Institute of Computing Technology
  * Author:  Xiang Gao, gaoxiang@ict.ac.cn
  *          Huacai Chen, chenhc@lemote.com
  *          Xiaofu Meng, Shuangshuang Zhang
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 22b9b2c..712f17a 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -451,7 +451,7 @@
 			/* Fall through */
 		case jr_op:
 			/* For R6, JR already emulated in jalr_op */
-			if (NO_R6EMU && insn.r_format.opcode == jr_op)
+			if (NO_R6EMU && insn.r_format.func == jr_op)
 				break;
 			*contpc = regs->regs[insn.r_format.rs];
 			return 1;
@@ -551,7 +551,7 @@
 				dec_insn.next_pc_inc;
 		return 1;
 	case blezl_op:
-		if (NO_R6EMU)
+		if (!insn.i_format.rt && NO_R6EMU)
 			break;
 	case blez_op:
 
@@ -588,7 +588,7 @@
 				dec_insn.next_pc_inc;
 		return 1;
 	case bgtzl_op:
-		if (NO_R6EMU)
+		if (!insn.i_format.rt && NO_R6EMU)
 			break;
 	case bgtz_op:
 		/*
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 7f660dc..fbea443 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -37,6 +37,7 @@
 #include <asm/cacheflush.h> /* for run_uncached() */
 #include <asm/traps.h>
 #include <asm/dma-coherence.h>
+#include <asm/mips-cm.h>
 
 /*
  * Special Variant of smp_call_function for use by cache functions:
@@ -51,9 +52,16 @@
 {
 	preempt_disable();
 
-#ifndef CONFIG_MIPS_MT_SMP
-	smp_call_function(func, info, 1);
-#endif
+	/*
+	 * The Coherent Manager propagates address-based cache ops to other
+	 * cores but not index-based ops. However, r4k_on_each_cpu is used
+	 * in both cases so there is no easy way to tell what kind of op is
+	 * executed to the other cores. The best we can probably do is
+	 * to restrict that call when a CM is not present because both
+	 * CM-based SMP protocols (CMP & CPS) restrict index-based cache ops.
+	 */
+	if (!mips_cm_present())
+		smp_call_function_many(&cpu_foreign_map, func, info, 1);
 	func(info);
 	preempt_enable();
 }
@@ -937,7 +945,9 @@
 }
 
 static char *way_string[] = { NULL, "direct mapped", "2-way",
-	"3-way", "4-way", "5-way", "6-way", "7-way", "8-way"
+	"3-way", "4-way", "5-way", "6-way", "7-way", "8-way",
+	"9-way", "10-way", "11-way", "12-way",
+	"13-way", "14-way", "15-way", "16-way",
 };
 
 static void probe_pcache(void)
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index 185e682..5625b19 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -119,18 +119,24 @@
 
 int get_c0_fdc_int(void)
 {
-	int mips_cpu_fdc_irq;
+	/*
+	 * Some cores claim the FDC is routable through the GIC, but it doesn't
+	 * actually seem to be connected for those Malta bitstreams.
+	 */
+	switch (current_cpu_type()) {
+	case CPU_INTERAPTIV:
+	case CPU_PROAPTIV:
+		return -1;
+	};
 
 	if (cpu_has_veic)
-		mips_cpu_fdc_irq = -1;
+		return -1;
 	else if (gic_present)
-		mips_cpu_fdc_irq = gic_get_c0_fdc_int();
+		return gic_get_c0_fdc_int();
 	else if (cp0_fdc_irq >= 0)
-		mips_cpu_fdc_irq = MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
+		return MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
 	else
-		mips_cpu_fdc_irq = -1;
-
-	return mips_cpu_fdc_irq;
+		return -1;
 }
 
 int get_c0_perfcount_int(void)
diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c
index d2dc836..8bd8ebb 100644
--- a/arch/mips/pistachio/init.c
+++ b/arch/mips/pistachio/init.c
@@ -63,13 +63,19 @@
 	plat_setup_iocoherency();
 }
 
-#define DEFAULT_CPC_BASE_ADDR 0x1bde0000
+#define DEFAULT_CPC_BASE_ADDR	0x1bde0000
+#define DEFAULT_CDMM_BASE_ADDR	0x1bdd0000
 
 phys_addr_t mips_cpc_default_phys_base(void)
 {
 	return DEFAULT_CPC_BASE_ADDR;
 }
 
+phys_addr_t mips_cdmm_phys_base(void)
+{
+	return DEFAULT_CDMM_BASE_ADDR;
+}
+
 static void __init mips_nmi_setup(void)
 {
 	void *base;
diff --git a/arch/mips/pistachio/time.c b/arch/mips/pistachio/time.c
index 67889fc..7c73fcb 100644
--- a/arch/mips/pistachio/time.c
+++ b/arch/mips/pistachio/time.c
@@ -27,6 +27,11 @@
 	return gic_get_c0_perfcount_int();
 }
 
+int get_c0_fdc_int(void)
+{
+	return gic_get_c0_fdc_int();
+}
+
 void __init plat_time_init(void)
 {
 	struct device_node *np;
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index a8bb972..cb9a095 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -81,11 +81,6 @@
 	prompt "SiByte SOC Stepping"
 	depends on SIBYTE_SB1xxx_SOC
 
-config CPU_SB1_PASS_1
-	bool "1250 Pass1"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-
 config CPU_SB1_PASS_2_1250
 	bool "1250 An"
 	depends on SIBYTE_SB1250
diff --git a/arch/mips/sibyte/common/bus_watcher.c b/arch/mips/sibyte/common/bus_watcher.c
index 5581844..41a1d22 100644
--- a/arch/mips/sibyte/common/bus_watcher.c
+++ b/arch/mips/sibyte/common/bus_watcher.c
@@ -81,10 +81,7 @@
 {
 	u32 status, l2_err, memio_err;
 
-#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
-	/* Destructive read, clears register and interrupt */
-	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
-#elif defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
+#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
 	/* Use non-destructive register */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG));
 #elif defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index 3c02b2a..9d3c24e 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -202,12 +202,10 @@
 
 	switch (war_pass) {
 	case K_SYS_REVISION_BCM1250_PASS1:
-#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
 		printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
 			    "and the kernel doesn't have the proper "
 			    "workarounds compiled in. @@@@\n");
 		bad_config = 1;
-#endif
 		break;
 	case K_SYS_REVISION_BCM1250_PASS2:
 		/* Pass 2 - easiest as default for now - so many numbers */
diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild
index de30b0c..6edb9ee 100644
--- a/arch/mn10300/include/asm/Kbuild
+++ b/arch/mn10300/include/asm/Kbuild
@@ -5,6 +5,7 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += sections.h
 generic-y += trace_clock.h
diff --git a/arch/mn10300/include/asm/mm-arch-hooks.h b/arch/mn10300/include/asm/mm-arch-hooks.h
deleted file mode 100644
index e2029a6..0000000
--- a/arch/mn10300/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_MN10300_MM_ARCH_HOOKS_H
-#define _ASM_MN10300_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_MN10300_MM_ARCH_HOOKS_H */
diff --git a/arch/nios2/include/asm/Kbuild b/arch/nios2/include/asm/Kbuild
index 434639d..914864e 100644
--- a/arch/nios2/include/asm/Kbuild
+++ b/arch/nios2/include/asm/Kbuild
@@ -30,6 +30,7 @@
 generic-y += kvm_para.h
 generic-y += local.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += module.h
 generic-y += msgbuf.h
diff --git a/arch/nios2/include/asm/mm-arch-hooks.h b/arch/nios2/include/asm/mm-arch-hooks.h
deleted file mode 100644
index d7290dc..0000000
--- a/arch/nios2/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_NIOS2_MM_ARCH_HOOKS_H
-#define _ASM_NIOS2_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_NIOS2_MM_ARCH_HOOKS_H */
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index e5a693b..443f44d 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -17,6 +17,7 @@
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IOMAP
 	select GENERIC_CPU_DEVICES
+	select HAVE_UID16
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_STRNCPY_FROM_USER
@@ -31,9 +32,6 @@
 config HAVE_DMA_ATTRS
 	def_bool y
 
-config UID16
-	def_bool y
-
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index 2a2e39b..2832f03 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -36,6 +36,7 @@
 generic-y += kvm_para.h
 generic-y += local.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += module.h
 generic-y += msgbuf.h
diff --git a/arch/openrisc/include/asm/mm-arch-hooks.h b/arch/openrisc/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 6d33cb5..0000000
--- a/arch/openrisc/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_OPENRISC_MM_ARCH_HOOKS_H
-#define _ASM_OPENRISC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_OPENRISC_MM_ARCH_HOOKS_H */
diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild
index 12b341d..f9b3a81 100644
--- a/arch/parisc/include/asm/Kbuild
+++ b/arch/parisc/include/asm/Kbuild
@@ -15,6 +15,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mutex.h
 generic-y += param.h
 generic-y += percpu.h
diff --git a/arch/parisc/include/asm/mm-arch-hooks.h b/arch/parisc/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 654ec63..0000000
--- a/arch/parisc/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_PARISC_MM_ARCH_HOOKS_H
-#define _ASM_PARISC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_PARISC_MM_ARCH_HOOKS_H */
diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h
index 3a08eae..3edbb9f 100644
--- a/arch/parisc/include/asm/pgalloc.h
+++ b/arch/parisc/include/asm/pgalloc.h
@@ -72,7 +72,7 @@
 
 static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 {
-	if(pmd_flag(*pmd) & PxD_FLAG_ATTACHED)
+	if (pmd_flag(*pmd) & PxD_FLAG_ATTACHED) {
 		/*
 		 * This is the permanent pmd attached to the pgd;
 		 * cannot free it.
@@ -81,6 +81,7 @@
 		 */
 		mm_inc_nr_pmds(mm);
 		return;
+	}
 	free_pages((unsigned long)pmd, PMD_ORDER);
 }
 
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index 0a18375..f93c4a4 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -16,7 +16,7 @@
 #include <asm/processor.h>
 #include <asm/cache.h>
 
-extern spinlock_t pa_dbit_lock;
+extern spinlock_t pa_tlb_lock;
 
 /*
  * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
@@ -33,6 +33,19 @@
  */
 #define kern_addr_valid(addr)	(1)
 
+/* Purge data and instruction TLB entries.  Must be called holding
+ * the pa_tlb_lock.  The TLB purge instructions are slow on SMP
+ * machines since the purge must be broadcast to all CPUs.
+ */
+
+static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
+{
+	mtsp(mm->context, 1);
+	pdtlb(addr);
+	if (unlikely(split_tlb))
+		pitlb(addr);
+}
+
 /* Certain architectures need to do special things when PTEs
  * within a page table are directly modified.  Thus, the following
  * hook is made available.
@@ -42,15 +55,20 @@
                 *(pteptr) = (pteval);                           \
         } while(0)
 
-extern void purge_tlb_entries(struct mm_struct *, unsigned long);
+#define pte_inserted(x)						\
+	((pte_val(x) & (_PAGE_PRESENT|_PAGE_ACCESSED))		\
+	 == (_PAGE_PRESENT|_PAGE_ACCESSED))
 
-#define set_pte_at(mm, addr, ptep, pteval)                      \
-	do {                                                    \
+#define set_pte_at(mm, addr, ptep, pteval)			\
+	do {							\
+		pte_t old_pte;					\
 		unsigned long flags;				\
-		spin_lock_irqsave(&pa_dbit_lock, flags);	\
-		set_pte(ptep, pteval);                          \
-		purge_tlb_entries(mm, addr);                    \
-		spin_unlock_irqrestore(&pa_dbit_lock, flags);	\
+		spin_lock_irqsave(&pa_tlb_lock, flags);		\
+		old_pte = *ptep;				\
+		set_pte(ptep, pteval);				\
+		if (pte_inserted(old_pte))			\
+			purge_tlb_entries(mm, addr);		\
+		spin_unlock_irqrestore(&pa_tlb_lock, flags);	\
 	} while (0)
 
 #endif /* !__ASSEMBLY__ */
@@ -268,7 +286,7 @@
 
 #define pte_none(x)     (pte_val(x) == 0)
 #define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,xp)	do { pte_val(*(xp)) = 0; } while (0)
+#define pte_clear(mm, addr, xp)  set_pte_at(mm, addr, xp, __pte(0))
 
 #define pmd_flag(x)	(pmd_val(x) & PxD_FLAG_MASK)
 #define pmd_address(x)	((unsigned long)(pmd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)
@@ -435,15 +453,15 @@
 	if (!pte_young(*ptep))
 		return 0;
 
-	spin_lock_irqsave(&pa_dbit_lock, flags);
+	spin_lock_irqsave(&pa_tlb_lock, flags);
 	pte = *ptep;
 	if (!pte_young(pte)) {
-		spin_unlock_irqrestore(&pa_dbit_lock, flags);
+		spin_unlock_irqrestore(&pa_tlb_lock, flags);
 		return 0;
 	}
 	set_pte(ptep, pte_mkold(pte));
 	purge_tlb_entries(vma->vm_mm, addr);
-	spin_unlock_irqrestore(&pa_dbit_lock, flags);
+	spin_unlock_irqrestore(&pa_tlb_lock, flags);
 	return 1;
 }
 
@@ -453,11 +471,12 @@
 	pte_t old_pte;
 	unsigned long flags;
 
-	spin_lock_irqsave(&pa_dbit_lock, flags);
+	spin_lock_irqsave(&pa_tlb_lock, flags);
 	old_pte = *ptep;
-	pte_clear(mm,addr,ptep);
-	purge_tlb_entries(mm, addr);
-	spin_unlock_irqrestore(&pa_dbit_lock, flags);
+	set_pte(ptep, __pte(0));
+	if (pte_inserted(old_pte))
+		purge_tlb_entries(mm, addr);
+	spin_unlock_irqrestore(&pa_tlb_lock, flags);
 
 	return old_pte;
 }
@@ -465,10 +484,10 @@
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	unsigned long flags;
-	spin_lock_irqsave(&pa_dbit_lock, flags);
+	spin_lock_irqsave(&pa_tlb_lock, flags);
 	set_pte(ptep, pte_wrprotect(*ptep));
 	purge_tlb_entries(mm, addr);
-	spin_unlock_irqrestore(&pa_dbit_lock, flags);
+	spin_unlock_irqrestore(&pa_tlb_lock, flags);
 }
 
 #define pte_same(A,B)	(pte_val(A) == pte_val(B))
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index 9d086a5..e84b964 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -13,6 +13,9 @@
  * active at any one time on the Merced bus.  This tlb purge
  * synchronisation is fairly lightweight and harmless so we activate
  * it on all systems not just the N class.
+
+ * It is also used to ensure PTE updates are atomic and consistent
+ * with the TLB.
  */
 extern spinlock_t pa_tlb_lock;
 
@@ -24,20 +27,24 @@
 
 #define smp_flush_tlb_all()	flush_tlb_all()
 
+int __flush_tlb_range(unsigned long sid,
+	unsigned long start, unsigned long end);
+
+#define flush_tlb_range(vma, start, end) \
+	__flush_tlb_range((vma)->vm_mm->context, start, end)
+
+#define flush_tlb_kernel_range(start, end) \
+	__flush_tlb_range(0, start, end)
+
 /*
  * flush_tlb_mm()
  *
- * XXX This code is NOT valid for HP-UX compatibility processes,
- * (although it will probably work 99% of the time). HP-UX
- * processes are free to play with the space id's and save them
- * over long periods of time, etc. so we have to preserve the
- * space and just flush the entire tlb. We need to check the
- * personality in order to do that, but the personality is not
- * currently being set correctly.
- *
- * Of course, Linux processes could do the same thing, but
- * we don't support that (and the compilers, dynamic linker,
- * etc. do not do that).
+ * The code to switch to a new context is NOT valid for processes
+ * which play with the space id's.  Thus, we have to preserve the
+ * space and just flush the entire tlb.  However, the compilers,
+ * dynamic linker, etc, do not manipulate space id's, so there
+ * could be a significant performance benefit in switching contexts
+ * and not flushing the whole tlb.
  */
 
 static inline void flush_tlb_mm(struct mm_struct *mm)
@@ -45,10 +52,18 @@
 	BUG_ON(mm == &init_mm); /* Should never happen */
 
 #if 1 || defined(CONFIG_SMP)
+	/* Except for very small threads, flushing the whole TLB is
+	 * faster than using __flush_tlb_range.  The pdtlb and pitlb
+	 * instructions are very slow because of the TLB broadcast.
+	 * It might be faster to do local range flushes on all CPUs
+	 * on PA 2.0 systems.
+	 */
 	flush_tlb_all();
 #else
 	/* FIXME: currently broken, causing space id and protection ids
-	 *  to go out of sync, resulting in faults on userspace accesses.
+	 * to go out of sync, resulting in faults on userspace accesses.
+	 * This approach needs further investigation since running many
+	 * small applications (e.g., GCC testsuite) is faster on HP-UX.
 	 */
 	if (mm) {
 		if (mm->context != 0)
@@ -65,22 +80,12 @@
 {
 	unsigned long flags, sid;
 
-	/* For one page, it's not worth testing the split_tlb variable */
-
-	mb();
 	sid = vma->vm_mm->context;
 	purge_tlb_start(flags);
 	mtsp(sid, 1);
 	pdtlb(addr);
-	pitlb(addr);
+	if (unlikely(split_tlb))
+		pitlb(addr);
 	purge_tlb_end(flags);
 }
-
-void __flush_tlb_range(unsigned long sid,
-	unsigned long start, unsigned long end);
-
-#define flush_tlb_range(vma,start,end) __flush_tlb_range((vma)->vm_mm->context,start,end)
-
-#define flush_tlb_kernel_range(start, end) __flush_tlb_range(0,start,end)
-
 #endif
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index f6448c7..cda6dbb 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -342,12 +342,15 @@
 EXPORT_SYMBOL(flush_kernel_icache_range_asm);
 
 #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
-int parisc_cache_flush_threshold __read_mostly = FLUSH_THRESHOLD;
+static unsigned long parisc_cache_flush_threshold __read_mostly = FLUSH_THRESHOLD;
+
+#define FLUSH_TLB_THRESHOLD (2*1024*1024) /* 2MB initial TLB threshold */
+static unsigned long parisc_tlb_flush_threshold __read_mostly = FLUSH_TLB_THRESHOLD;
 
 void __init parisc_setup_cache_timing(void)
 {
 	unsigned long rangetime, alltime;
-	unsigned long size;
+	unsigned long size, start;
 
 	alltime = mfctl(16);
 	flush_data_cache();
@@ -364,14 +367,43 @@
 	/* Racy, but if we see an intermediate value, it's ok too... */
 	parisc_cache_flush_threshold = size * alltime / rangetime;
 
-	parisc_cache_flush_threshold = (parisc_cache_flush_threshold + L1_CACHE_BYTES - 1) &~ (L1_CACHE_BYTES - 1); 
+	parisc_cache_flush_threshold = L1_CACHE_ALIGN(parisc_cache_flush_threshold);
 	if (!parisc_cache_flush_threshold)
 		parisc_cache_flush_threshold = FLUSH_THRESHOLD;
 
 	if (parisc_cache_flush_threshold > cache_info.dc_size)
 		parisc_cache_flush_threshold = cache_info.dc_size;
 
-	printk(KERN_INFO "Setting cache flush threshold to %x (%d CPUs online)\n", parisc_cache_flush_threshold, num_online_cpus());
+	printk(KERN_INFO "Setting cache flush threshold to %lu kB\n",
+		parisc_cache_flush_threshold/1024);
+
+	/* calculate TLB flush threshold */
+
+	alltime = mfctl(16);
+	flush_tlb_all();
+	alltime = mfctl(16) - alltime;
+
+	size = PAGE_SIZE;
+	start = (unsigned long) _text;
+	rangetime = mfctl(16);
+	while (start < (unsigned long) _end) {
+		flush_tlb_kernel_range(start, start + PAGE_SIZE);
+		start += PAGE_SIZE;
+		size += PAGE_SIZE;
+	}
+	rangetime = mfctl(16) - rangetime;
+
+	printk(KERN_DEBUG "Whole TLB flush %lu cycles, flushing %lu bytes %lu cycles\n",
+		alltime, size, rangetime);
+
+	parisc_tlb_flush_threshold = size * alltime / rangetime;
+	parisc_tlb_flush_threshold *= num_online_cpus();
+	parisc_tlb_flush_threshold = PAGE_ALIGN(parisc_tlb_flush_threshold);
+	if (!parisc_tlb_flush_threshold)
+		parisc_tlb_flush_threshold = FLUSH_TLB_THRESHOLD;
+
+	printk(KERN_INFO "Setting TLB flush threshold to %lu kB\n",
+		parisc_tlb_flush_threshold/1024);
 }
 
 extern void purge_kernel_dcache_page_asm(unsigned long);
@@ -403,48 +435,45 @@
 }
 EXPORT_SYMBOL(copy_user_page);
 
-void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
+/* __flush_tlb_range()
+ *
+ * returns 1 if all TLBs were flushed.
+ */
+int __flush_tlb_range(unsigned long sid, unsigned long start,
+		      unsigned long end)
 {
-	unsigned long flags;
+	unsigned long flags, size;
 
-	/* Note: purge_tlb_entries can be called at startup with
-	   no context.  */
-
-	purge_tlb_start(flags);
-	mtsp(mm->context, 1);
-	pdtlb(addr);
-	pitlb(addr);
-	purge_tlb_end(flags);
-}
-EXPORT_SYMBOL(purge_tlb_entries);
-
-void __flush_tlb_range(unsigned long sid, unsigned long start,
-		       unsigned long end)
-{
-	unsigned long npages;
-
-	npages = ((end - (start & PAGE_MASK)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-	if (npages >= 512)  /* 2MB of space: arbitrary, should be tuned */
+	size = (end - start);
+	if (size >= parisc_tlb_flush_threshold) {
 		flush_tlb_all();
-	else {
-		unsigned long flags;
+		return 1;
+	}
 
+	/* Purge TLB entries for small ranges using the pdtlb and
+	   pitlb instructions.  These instructions execute locally
+	   but cause a purge request to be broadcast to other TLBs.  */
+	if (likely(!split_tlb)) {
+		while (start < end) {
+			purge_tlb_start(flags);
+			mtsp(sid, 1);
+			pdtlb(start);
+			purge_tlb_end(flags);
+			start += PAGE_SIZE;
+		}
+		return 0;
+	}
+
+	/* split TLB case */
+	while (start < end) {
 		purge_tlb_start(flags);
 		mtsp(sid, 1);
-		if (split_tlb) {
-			while (npages--) {
-				pdtlb(start);
-				pitlb(start);
-				start += PAGE_SIZE;
-			}
-		} else {
-			while (npages--) {
-				pdtlb(start);
-				start += PAGE_SIZE;
-			}
-		}
+		pdtlb(start);
+		pitlb(start);
 		purge_tlb_end(flags);
+		start += PAGE_SIZE;
 	}
+	return 0;
 }
 
 static void cacheflush_h_tmp_function(void *dummy)
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 7581961..c5ef408 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -45,7 +45,7 @@
 	.level 2.0
 #endif
 
-	.import         pa_dbit_lock,data
+	.import		pa_tlb_lock,data
 
 	/* space_to_prot macro creates a prot id from a space id */
 
@@ -420,8 +420,8 @@
 	SHLREG		%r9,PxD_VALUE_SHIFT,\pmd
 	extru		\va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index
 	dep		%r0,31,PAGE_SHIFT,\pmd  /* clear offset */
-	shladd		\index,BITS_PER_PTE_ENTRY,\pmd,\pmd
-	LDREG		%r0(\pmd),\pte		/* pmd is now pte */
+	shladd		\index,BITS_PER_PTE_ENTRY,\pmd,\pmd /* pmd is now pte */
+	LDREG		%r0(\pmd),\pte
 	bb,>=,n		\pte,_PAGE_PRESENT_BIT,\fault
 	.endm
 
@@ -453,57 +453,53 @@
 	L2_ptep		\pgd,\pte,\index,\va,\fault
 	.endm
 
-	/* Acquire pa_dbit_lock lock. */
-	.macro		dbit_lock	spc,tmp,tmp1
+	/* Acquire pa_tlb_lock lock and recheck page is still present. */
+	.macro		tlb_lock	spc,ptp,pte,tmp,tmp1,fault
 #ifdef CONFIG_SMP
 	cmpib,COND(=),n	0,\spc,2f
-	load32		PA(pa_dbit_lock),\tmp
+	load32		PA(pa_tlb_lock),\tmp
 1:	LDCW		0(\tmp),\tmp1
 	cmpib,COND(=)	0,\tmp1,1b
 	nop
+	LDREG		0(\ptp),\pte
+	bb,<,n		\pte,_PAGE_PRESENT_BIT,2f
+	b		\fault
+	stw		 \spc,0(\tmp)
 2:
 #endif
 	.endm
 
-	/* Release pa_dbit_lock lock without reloading lock address. */
-	.macro		dbit_unlock0	spc,tmp
+	/* Release pa_tlb_lock lock without reloading lock address. */
+	.macro		tlb_unlock0	spc,tmp
 #ifdef CONFIG_SMP
 	or,COND(=)	%r0,\spc,%r0
 	stw             \spc,0(\tmp)
 #endif
 	.endm
 
-	/* Release pa_dbit_lock lock. */
-	.macro		dbit_unlock1	spc,tmp
+	/* Release pa_tlb_lock lock. */
+	.macro		tlb_unlock1	spc,tmp
 #ifdef CONFIG_SMP
-	load32		PA(pa_dbit_lock),\tmp
-	dbit_unlock0	\spc,\tmp
+	load32		PA(pa_tlb_lock),\tmp
+	tlb_unlock0	\spc,\tmp
 #endif
 	.endm
 
 	/* Set the _PAGE_ACCESSED bit of the PTE.  Be clever and
 	 * don't needlessly dirty the cache line if it was already set */
-	.macro		update_ptep	spc,ptep,pte,tmp,tmp1
-#ifdef CONFIG_SMP
-	or,COND(=)	%r0,\spc,%r0
-	LDREG		0(\ptep),\pte
-#endif
+	.macro		update_accessed	ptp,pte,tmp,tmp1
 	ldi		_PAGE_ACCESSED,\tmp1
 	or		\tmp1,\pte,\tmp
 	and,COND(<>)	\tmp1,\pte,%r0
-	STREG		\tmp,0(\ptep)
+	STREG		\tmp,0(\ptp)
 	.endm
 
 	/* Set the dirty bit (and accessed bit).  No need to be
 	 * clever, this is only used from the dirty fault */
-	.macro		update_dirty	spc,ptep,pte,tmp
-#ifdef CONFIG_SMP
-	or,COND(=)	%r0,\spc,%r0
-	LDREG		0(\ptep),\pte
-#endif
+	.macro		update_dirty	ptp,pte,tmp
 	ldi		_PAGE_ACCESSED|_PAGE_DIRTY,\tmp
 	or		\tmp,\pte,\pte
-	STREG		\pte,0(\ptep)
+	STREG		\pte,0(\ptp)
 	.endm
 
 	/* bitshift difference between a PFN (based on kernel's PAGE_SIZE)
@@ -1148,14 +1144,14 @@
 
 	L3_ptep		ptp,pte,t0,va,dtlb_check_alias_20w
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,dtlb_check_alias_20w
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 	
 	idtlbt          pte,prot
-	dbit_unlock1	spc,t0
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1174,14 +1170,14 @@
 
 	L3_ptep		ptp,pte,t0,va,nadtlb_check_alias_20w
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,nadtlb_check_alias_20w
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	idtlbt          pte,prot
-	dbit_unlock1	spc,t0
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1202,20 +1198,20 @@
 
 	L2_ptep		ptp,pte,t0,va,dtlb_check_alias_11
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,dtlb_check_alias_11
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
-	mfsp		%sr1,t0  /* Save sr1 so we can use it in tlb inserts */
+	mfsp		%sr1,t1  /* Save sr1 so we can use it in tlb inserts */
 	mtsp		spc,%sr1
 
 	idtlba		pte,(%sr1,va)
 	idtlbp		prot,(%sr1,va)
 
-	mtsp		t0, %sr1	/* Restore sr1 */
-	dbit_unlock1	spc,t0
+	mtsp		t1, %sr1	/* Restore sr1 */
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1235,21 +1231,20 @@
 
 	L2_ptep		ptp,pte,t0,va,nadtlb_check_alias_11
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,nadtlb_check_alias_11
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
-
-	mfsp		%sr1,t0  /* Save sr1 so we can use it in tlb inserts */
+	mfsp		%sr1,t1  /* Save sr1 so we can use it in tlb inserts */
 	mtsp		spc,%sr1
 
 	idtlba		pte,(%sr1,va)
 	idtlbp		prot,(%sr1,va)
 
-	mtsp		t0, %sr1	/* Restore sr1 */
-	dbit_unlock1	spc,t0
+	mtsp		t1, %sr1	/* Restore sr1 */
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1269,16 +1264,16 @@
 
 	L2_ptep		ptp,pte,t0,va,dtlb_check_alias_20
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,dtlb_check_alias_20
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
-	f_extend	pte,t0
+	f_extend	pte,t1
 
 	idtlbt          pte,prot
-	dbit_unlock1	spc,t0
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1297,16 +1292,16 @@
 
 	L2_ptep		ptp,pte,t0,va,nadtlb_check_alias_20
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,nadtlb_check_alias_20
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
-	f_extend	pte,t0
+	f_extend	pte,t1
 	
-        idtlbt          pte,prot
-	dbit_unlock1	spc,t0
+	idtlbt		pte,prot
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1406,14 +1401,14 @@
 
 	L3_ptep		ptp,pte,t0,va,itlb_fault
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,itlb_fault
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 	
 	iitlbt          pte,prot
-	dbit_unlock1	spc,t0
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1430,14 +1425,14 @@
 
 	L3_ptep		ptp,pte,t0,va,naitlb_check_alias_20w
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,naitlb_check_alias_20w
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	iitlbt          pte,prot
-	dbit_unlock1	spc,t0
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1458,20 +1453,20 @@
 
 	L2_ptep		ptp,pte,t0,va,itlb_fault
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,itlb_fault
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
-	mfsp		%sr1,t0  /* Save sr1 so we can use it in tlb inserts */
+	mfsp		%sr1,t1  /* Save sr1 so we can use it in tlb inserts */
 	mtsp		spc,%sr1
 
 	iitlba		pte,(%sr1,va)
 	iitlbp		prot,(%sr1,va)
 
-	mtsp		t0, %sr1	/* Restore sr1 */
-	dbit_unlock1	spc,t0
+	mtsp		t1, %sr1	/* Restore sr1 */
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1482,20 +1477,20 @@
 
 	L2_ptep		ptp,pte,t0,va,naitlb_check_alias_11
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,naitlb_check_alias_11
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
-	mfsp		%sr1,t0  /* Save sr1 so we can use it in tlb inserts */
+	mfsp		%sr1,t1  /* Save sr1 so we can use it in tlb inserts */
 	mtsp		spc,%sr1
 
 	iitlba		pte,(%sr1,va)
 	iitlbp		prot,(%sr1,va)
 
-	mtsp		t0, %sr1	/* Restore sr1 */
-	dbit_unlock1	spc,t0
+	mtsp		t1, %sr1	/* Restore sr1 */
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1516,16 +1511,16 @@
 
 	L2_ptep		ptp,pte,t0,va,itlb_fault
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,itlb_fault
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
-	f_extend	pte,t0	
+	f_extend	pte,t1
 
 	iitlbt          pte,prot
-	dbit_unlock1	spc,t0
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1536,16 +1531,16 @@
 
 	L2_ptep		ptp,pte,t0,va,naitlb_check_alias_20
 
-	dbit_lock	spc,t0,t1
-	update_ptep	spc,ptp,pte,t0,t1
+	tlb_lock	spc,ptp,pte,t0,t1,naitlb_check_alias_20
+	update_accessed	ptp,pte,t0,t1
 
 	make_insert_tlb	spc,pte,prot
 
-	f_extend	pte,t0
+	f_extend	pte,t1
 
 	iitlbt          pte,prot
-	dbit_unlock1	spc,t0
 
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1568,14 +1563,14 @@
 
 	L3_ptep		ptp,pte,t0,va,dbit_fault
 
-	dbit_lock	spc,t0,t1
-	update_dirty	spc,ptp,pte,t1
+	tlb_lock	spc,ptp,pte,t0,t1,dbit_fault
+	update_dirty	ptp,pte,t1
 
 	make_insert_tlb	spc,pte,prot
 		
 	idtlbt          pte,prot
-	dbit_unlock0	spc,t0
 
+	tlb_unlock0	spc,t0
 	rfir
 	nop
 #else
@@ -1588,8 +1583,8 @@
 
 	L2_ptep		ptp,pte,t0,va,dbit_fault
 
-	dbit_lock	spc,t0,t1
-	update_dirty	spc,ptp,pte,t1
+	tlb_lock	spc,ptp,pte,t0,t1,dbit_fault
+	update_dirty	ptp,pte,t1
 
 	make_insert_tlb_11	spc,pte,prot
 
@@ -1600,8 +1595,8 @@
 	idtlbp		prot,(%sr1,va)
 
 	mtsp            t1, %sr1     /* Restore sr1 */
-	dbit_unlock0	spc,t0
 
+	tlb_unlock0	spc,t0
 	rfir
 	nop
 
@@ -1612,16 +1607,16 @@
 
 	L2_ptep		ptp,pte,t0,va,dbit_fault
 
-	dbit_lock	spc,t0,t1
-	update_dirty	spc,ptp,pte,t1
+	tlb_lock	spc,ptp,pte,t0,t1,dbit_fault
+	update_dirty	ptp,pte,t1
 
 	make_insert_tlb	spc,pte,prot
 
 	f_extend	pte,t1
 	
-        idtlbt          pte,prot
-	dbit_unlock0	spc,t0
+	idtlbt		pte,prot
 
+	tlb_unlock0	spc,t0
 	rfir
 	nop
 #endif
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 6548fd1..b99b39f 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -43,10 +43,6 @@
 
 #include "../math-emu/math-emu.h"	/* for handle_fpe() */
 
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-DEFINE_SPINLOCK(pa_dbit_lock);
-#endif
-
 static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
 	struct pt_regs *regs);
 
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index ccde8f0..112ccf4 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -52,6 +52,22 @@
 	.text
 
 /*
+ * Used by threads when the lock bit of core_idle_state is set.
+ * Threads will spin in HMT_LOW until the lock bit is cleared.
+ * r14 - pointer to core_idle_state
+ * r15 - used to load contents of core_idle_state
+ */
+
+core_idle_lock_held:
+	HMT_LOW
+3:	lwz	r15,0(r14)
+	andi.   r15,r15,PNV_CORE_IDLE_LOCK_BIT
+	bne	3b
+	HMT_MEDIUM
+	lwarx	r15,0,r14
+	blr
+
+/*
  * Pass requested state in r3:
  *	r3 - PNV_THREAD_NAP/SLEEP/WINKLE
  *
@@ -150,6 +166,10 @@
 	ld	r14,PACA_CORE_IDLE_STATE_PTR(r13)
 lwarx_loop1:
 	lwarx	r15,0,r14
+
+	andi.   r9,r15,PNV_CORE_IDLE_LOCK_BIT
+	bnel	core_idle_lock_held
+
 	andc	r15,r15,r7			/* Clear thread bit */
 
 	andi.	r15,r15,PNV_CORE_IDLE_THREAD_BITS
@@ -294,7 +314,7 @@
 	 * workaround undo code or resyncing timebase or restoring context
 	 * In either case loop until the lock bit is cleared.
 	 */
-	bne	core_idle_lock_held
+	bnel	core_idle_lock_held
 
 	cmpwi	cr2,r15,0
 	lbz	r4,PACA_SUBCORE_SIBLING_MASK(r13)
@@ -319,15 +339,6 @@
 	isync
 	b	common_exit
 
-core_idle_lock_held:
-	HMT_LOW
-core_idle_lock_loop:
-	lwz	r15,0(14)
-	andi.   r9,r15,PNV_CORE_IDLE_LOCK_BIT
-	bne	core_idle_lock_loop
-	HMT_MEDIUM
-	b	lwarx_loop2
-
 first_thread_in_subcore:
 	/* First thread in subcore to wakeup */
 	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 6530f1b..37de90f 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -297,6 +297,8 @@
 
 	__this_cpu_inc(irq_stat.mce_exceptions);
 
+	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
+
 	if (cur_cpu_spec && cur_cpu_spec->machine_check_early)
 		handled = cur_cpu_spec->machine_check_early(regs);
 	return handled;
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 6d53597..a67c6d7 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -529,6 +529,10 @@
 		printk(KERN_ALERT "Unable to handle kernel paging request for "
 			"instruction fetch\n");
 		break;
+	case 0x600:
+		printk(KERN_ALERT "Unable to handle kernel paging request for "
+			"unaligned access at address 0x%08lx\n", regs->dar);
+		break;
 	default:
 		printk(KERN_ALERT "Unable to handle kernel paging request for "
 			"unknown fault\n");
diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
index ec2eb20..df95629 100644
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -320,6 +320,8 @@
 	if (!attr)
 		return NULL;
 
+	sysfs_attr_init(&attr->attr.attr);
+
 	attr->var = str;
 	attr->attr.attr.name = name;
 	attr->attr.attr.mode = 0444;
diff --git a/arch/powerpc/platforms/powernv/opal-elog.c b/arch/powerpc/platforms/powernv/opal-elog.c
index 4949ef0..37f959b 100644
--- a/arch/powerpc/platforms/powernv/opal-elog.c
+++ b/arch/powerpc/platforms/powernv/opal-elog.c
@@ -237,7 +237,7 @@
 	return elog;
 }
 
-static void elog_work_fn(struct work_struct *work)
+static irqreturn_t elog_event(int irq, void *data)
 {
 	__be64 size;
 	__be64 id;
@@ -251,7 +251,7 @@
 	rc = opal_get_elog_size(&id, &size, &type);
 	if (rc != OPAL_SUCCESS) {
 		pr_err("ELOG: OPAL log info read failed\n");
-		return;
+		return IRQ_HANDLED;
 	}
 
 	elog_size = be64_to_cpu(size);
@@ -270,16 +270,10 @@
 	 * entries.
 	 */
 	if (kset_find_obj(elog_kset, name))
-		return;
+		return IRQ_HANDLED;
 
 	create_elog_obj(log_id, elog_size, elog_type);
-}
 
-static DECLARE_WORK(elog_work, elog_work_fn);
-
-static irqreturn_t elog_event(int irq, void *data)
-{
-	schedule_work(&elog_work);
 	return IRQ_HANDLED;
 }
 
@@ -304,8 +298,8 @@
 		return irq;
 	}
 
-	rc = request_irq(irq, elog_event,
-			IRQ_TYPE_LEVEL_HIGH, "opal-elog", NULL);
+	rc = request_threaded_irq(irq, NULL, elog_event,
+			IRQF_TRIGGER_HIGH | IRQF_ONESHOT, "opal-elog", NULL);
 	if (rc) {
 		pr_err("%s: Can't request OPAL event irq (%d)\n",
 		       __func__, rc);
diff --git a/arch/powerpc/platforms/powernv/opal-prd.c b/arch/powerpc/platforms/powernv/opal-prd.c
index 46cb3fe..4ece8e4 100644
--- a/arch/powerpc/platforms/powernv/opal-prd.c
+++ b/arch/powerpc/platforms/powernv/opal-prd.c
@@ -112,6 +112,7 @@
 static int opal_prd_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	size_t addr, size;
+	pgprot_t page_prot;
 	int rc;
 
 	pr_devel("opal_prd_mmap(0x%016lx, 0x%016lx, 0x%lx, 0x%lx)\n",
@@ -125,13 +126,11 @@
 	if (!opal_prd_range_is_valid(addr, size))
 		return -EINVAL;
 
-	vma->vm_page_prot = __pgprot(pgprot_val(phys_mem_access_prot(file,
-						vma->vm_pgoff,
-						 size, vma->vm_page_prot))
-					| _PAGE_SPECIAL);
+	page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
+					 size, vma->vm_page_prot);
 
 	rc = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, size,
-			vma->vm_page_prot);
+				page_prot);
 
 	return rc;
 }
diff --git a/arch/powerpc/sysdev/ppc4xx_hsta_msi.c b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
index 2bc3367..87f9623 100644
--- a/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
+++ b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/semaphore.h>
 #include <asm/msi_bitmap.h>
+#include <asm/ppc-pci.h>
 
 struct ppc4xx_hsta_msi {
 	struct device *dev;
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
index dc5385e..5ad26dd 100644
--- a/arch/s390/include/asm/Kbuild
+++ b/arch/s390/include/asm/Kbuild
@@ -3,5 +3,6 @@
 generic-y += clkdev.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += trace_clock.h
diff --git a/arch/s390/include/asm/ctl_reg.h b/arch/s390/include/asm/ctl_reg.h
index cfad7fca..d7697ab 100644
--- a/arch/s390/include/asm/ctl_reg.h
+++ b/arch/s390/include/asm/ctl_reg.h
@@ -57,7 +57,10 @@
 		unsigned long lap  : 1; /* Low-address-protection control */
 		unsigned long	   : 4;
 		unsigned long edat : 1; /* Enhanced-DAT-enablement control */
-		unsigned long	   : 23;
+		unsigned long	   : 4;
+		unsigned long afp  : 1; /* AFP-register control */
+		unsigned long vx   : 1; /* Vector enablement control */
+		unsigned long	   : 17;
 	};
 };
 
diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h
index 0130d03..d9be7c0 100644
--- a/arch/s390/include/asm/hugetlb.h
+++ b/arch/s390/include/asm/hugetlb.h
@@ -14,6 +14,7 @@
 
 #define is_hugepage_only_range(mm, addr, len)	0
 #define hugetlb_free_pgd_range			free_pgd_range
+#define hugepages_supported()			(MACHINE_HAS_HPAGE)
 
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		     pte_t *ptep, pte_t pte);
diff --git a/arch/s390/include/asm/mm-arch-hooks.h b/arch/s390/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 07680b2..0000000
--- a/arch/s390/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_S390_MM_ARCH_HOOKS_H
-#define _ASM_S390_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_S390_MM_ARCH_HOOKS_H */
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index dd34523..53eacbd 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -17,10 +17,7 @@
 #define PAGE_DEFAULT_ACC	0
 #define PAGE_DEFAULT_KEY	(PAGE_DEFAULT_ACC << 4)
 
-#include <asm/setup.h>
-#ifndef __ASSEMBLY__
-
-extern int HPAGE_SHIFT;
+#define HPAGE_SHIFT	20
 #define HPAGE_SIZE	(1UL << HPAGE_SHIFT)
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
@@ -30,6 +27,9 @@
 #define ARCH_HAS_PREPARE_HUGEPAGE
 #define ARCH_HAS_HUGEPAGE_CLEAR_FLUSH
 
+#include <asm/setup.h>
+#ifndef __ASSEMBLY__
+
 static inline void storage_key_init_range(unsigned long start, unsigned long end)
 {
 #if PAGE_DEFAULT_KEY
diff --git a/arch/s390/include/asm/perf_event.h b/arch/s390/include/asm/perf_event.h
index 4cb19fe..f897ec7 100644
--- a/arch/s390/include/asm/perf_event.h
+++ b/arch/s390/include/asm/perf_event.h
@@ -87,7 +87,15 @@
 } __packed;
 
 /* Perf hardware reserve and release functions */
+#ifdef CONFIG_PERF_EVENTS
 int perf_reserve_sampling(void);
 void perf_release_sampling(void);
+#else /* CONFIG_PERF_EVENTS */
+static inline int perf_reserve_sampling(void)
+{
+	return 0;
+}
+static inline void perf_release_sampling(void) {}
+#endif /* CONFIG_PERF_EVENTS */
 
 #endif /* _ASM_S390_PERF_EVENT_H */
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index c7d1b9d..a2da259 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -23,15 +23,15 @@
 
 int main(void)
 {
-	DEFINE(__THREAD_info, offsetof(struct task_struct, stack));
-	DEFINE(__THREAD_ksp, offsetof(struct task_struct, thread.ksp));
-	DEFINE(__THREAD_mm_segment, offsetof(struct task_struct, thread.mm_segment));
-	BLANK();
+	DEFINE(__TASK_thread_info, offsetof(struct task_struct, stack));
+	DEFINE(__TASK_thread, offsetof(struct task_struct, thread));
 	DEFINE(__TASK_pid, offsetof(struct task_struct, pid));
 	BLANK();
-	DEFINE(__THREAD_per_cause, offsetof(struct task_struct, thread.per_event.cause));
-	DEFINE(__THREAD_per_address, offsetof(struct task_struct, thread.per_event.address));
-	DEFINE(__THREAD_per_paid, offsetof(struct task_struct, thread.per_event.paid));
+	DEFINE(__THREAD_ksp, offsetof(struct thread_struct, ksp));
+	DEFINE(__THREAD_per_cause, offsetof(struct thread_struct, per_event.cause));
+	DEFINE(__THREAD_per_address, offsetof(struct thread_struct, per_event.address));
+	DEFINE(__THREAD_per_paid, offsetof(struct thread_struct, per_event.paid));
+	DEFINE(__THREAD_trap_tdb, offsetof(struct thread_struct, trap_tdb));
 	BLANK();
 	DEFINE(__TI_task, offsetof(struct thread_info, task));
 	DEFINE(__TI_flags, offsetof(struct thread_info, flags));
@@ -176,7 +176,6 @@
 	DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
 	DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
 	DEFINE(__LC_PGM_TDB, offsetof(struct _lowcore, pgm_tdb));
-	DEFINE(__THREAD_trap_tdb, offsetof(struct task_struct, thread.trap_tdb));
 	DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
 	DEFINE(__SIE_PROG0C, offsetof(struct kvm_s390_sie_block, prog0c));
 	DEFINE(__SIE_PROG20, offsetof(struct kvm_s390_sie_block, prog20));
diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c
index bff5e3b..8ba3243 100644
--- a/arch/s390/kernel/cache.c
+++ b/arch/s390/kernel/cache.c
@@ -138,6 +138,8 @@
 	union cache_topology ct;
 	enum cache_type ctype;
 
+	if (!test_facility(34))
+		return -EOPNOTSUPP;
 	if (!this_cpu_ci)
 		return -EINVAL;
 	ct.raw = ecag(EXTRACT_TOPOLOGY, 0, 0);
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 3238893..84062e7 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -178,17 +178,21 @@
  */
 ENTRY(__switch_to)
 	stmg	%r6,%r15,__SF_GPRS(%r15)	# store gprs of prev task
-	stg	%r15,__THREAD_ksp(%r2)		# store kernel stack of prev
-	lg	%r4,__THREAD_info(%r2)		# get thread_info of prev
-	lg	%r5,__THREAD_info(%r3)		# get thread_info of next
+	lgr	%r1,%r2
+	aghi	%r1,__TASK_thread		# thread_struct of prev task
+	lg	%r4,__TASK_thread_info(%r2)	# get thread_info of prev
+	lg	%r5,__TASK_thread_info(%r3)	# get thread_info of next
+	stg	%r15,__THREAD_ksp(%r1)		# store kernel stack of prev
+	lgr	%r1,%r3
+	aghi	%r1,__TASK_thread		# thread_struct of next task
 	lgr	%r15,%r5
 	aghi	%r15,STACK_INIT			# end of kernel stack of next
 	stg	%r3,__LC_CURRENT		# store task struct of next
 	stg	%r5,__LC_THREAD_INFO		# store thread info of next
 	stg	%r15,__LC_KERNEL_STACK		# store end of kernel stack
+	lg	%r15,__THREAD_ksp(%r1)		# load kernel stack of next
 	lctl	%c4,%c4,__TASK_pid(%r3)		# load pid to control reg. 4
 	mvc	__LC_CURRENT_PID+4(4,%r0),__TASK_pid(%r3) # store pid of next
-	lg	%r15,__THREAD_ksp(%r3)		# load kernel stack of next
 	lmg	%r6,%r15,__SF_GPRS(%r15)	# load gprs of next task
 	br	%r14
 
@@ -417,6 +421,7 @@
 	LAST_BREAK %r14
 	lg	%r15,__LC_KERNEL_STACK
 	lg	%r14,__TI_task(%r12)
+	aghi	%r14,__TASK_thread	# pointer to thread_struct
 	lghi	%r13,__LC_PGM_TDB
 	tm	__LC_PGM_ILC+2,0x02	# check for transaction abort
 	jz	2f
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 505c17c..56b5508 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -21,6 +21,7 @@
 #include <asm/nmi.h>
 #include <asm/crw.h>
 #include <asm/switch_to.h>
+#include <asm/ctl_reg.h>
 
 struct mcck_struct {
 	int kill_task;
@@ -129,26 +130,30 @@
 	} else
 		asm volatile("lfpc 0(%0)" : : "a" (fpt_creg_save_area));
 
-	asm volatile(
-		"	ld	0,0(%0)\n"
-		"	ld	1,8(%0)\n"
-		"	ld	2,16(%0)\n"
-		"	ld	3,24(%0)\n"
-		"	ld	4,32(%0)\n"
-		"	ld	5,40(%0)\n"
-		"	ld	6,48(%0)\n"
-		"	ld	7,56(%0)\n"
-		"	ld	8,64(%0)\n"
-		"	ld	9,72(%0)\n"
-		"	ld	10,80(%0)\n"
-		"	ld	11,88(%0)\n"
-		"	ld	12,96(%0)\n"
-		"	ld	13,104(%0)\n"
-		"	ld	14,112(%0)\n"
-		"	ld	15,120(%0)\n"
-		: : "a" (fpt_save_area));
-	/* Revalidate vector registers */
-	if (MACHINE_HAS_VX && current->thread.vxrs) {
+	if (!MACHINE_HAS_VX) {
+		/* Revalidate floating point registers */
+		asm volatile(
+			"	ld	0,0(%0)\n"
+			"	ld	1,8(%0)\n"
+			"	ld	2,16(%0)\n"
+			"	ld	3,24(%0)\n"
+			"	ld	4,32(%0)\n"
+			"	ld	5,40(%0)\n"
+			"	ld	6,48(%0)\n"
+			"	ld	7,56(%0)\n"
+			"	ld	8,64(%0)\n"
+			"	ld	9,72(%0)\n"
+			"	ld	10,80(%0)\n"
+			"	ld	11,88(%0)\n"
+			"	ld	12,96(%0)\n"
+			"	ld	13,104(%0)\n"
+			"	ld	14,112(%0)\n"
+			"	ld	15,120(%0)\n"
+			: : "a" (fpt_save_area));
+	} else {
+		/* Revalidate vector registers */
+		union ctlreg0 cr0;
+
 		if (!mci->vr) {
 			/*
 			 * Vector registers can't be restored and therefore
@@ -156,8 +161,12 @@
 			 */
 			kill_task = 1;
 		}
+		cr0.val = S390_lowcore.cregs_save_area[0];
+		cr0.afp = cr0.vx = 1;
+		__ctl_load(cr0.val, 0, 0);
 		restore_vx_regs((__vector128 *)
-				S390_lowcore.vector_save_area_addr);
+				&S390_lowcore.vector_save_area);
+		__ctl_load(S390_lowcore.cregs_save_area[0], 0, 0);
 	}
 	/* Revalidate access registers */
 	asm volatile(
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index dc5edc2..8f587d8 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -163,7 +163,7 @@
 asmlinkage void execve_tail(void)
 {
 	current->thread.fp_regs.fpc = 0;
-	asm volatile("sfpc %0,%0" : : "d" (0));
+	asm volatile("sfpc %0" : : "d" (0));
 }
 
 /*
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index 43c3169..ada0c07 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -270,6 +270,8 @@
 	jno	.Lesa2
 	ahi	%r15,-80
 	stmh	%r6,%r15,96(%r15)		# store upper register halves
+	basr	%r13,0
+	lmh	%r0,%r15,.Lzeroes-.(%r13)	# clear upper register halves
 .Lesa2:
 	lr	%r10,%r2			# save string pointer
 	lhi	%r2,0
@@ -291,6 +293,8 @@
 .Lesa3:
 	lm	%r6,%r15,120(%r15)		# restore registers
 	br	%r14
+.Lzeroes:
+	.fill	64,4,0
 
 .LwritedataS4:
 	.long	0x00760005			# SCLP command for write data
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index f7f027c..ca070d2 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -885,8 +885,6 @@
 	 */
 	setup_hwcaps();
 
-	HPAGE_SHIFT = MACHINE_HAS_HPAGE ? 20 : 0;
-
 	/*
 	 * Create kernel page tables and switch to virtual addressing.
 	 */
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 4d96c9f..7bea81d 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -259,7 +259,7 @@
 	}
 
 	/* get vector interrupt code from fpc */
-	asm volatile("stfpc %0" : "=m" (current->thread.fp_regs.fpc));
+	asm volatile("stfpc %0" : "=Q" (current->thread.fp_regs.fpc));
 	vic = (current->thread.fp_regs.fpc & 0xf00) >> 8;
 	switch (vic) {
 	case 1: /* invalid vector operation */
@@ -297,7 +297,7 @@
 
 	location = get_trap_ip(regs);
 
-	asm volatile("stfpc %0" : "=m" (current->thread.fp_regs.fpc));
+	asm volatile("stfpc %0" : "=Q" (current->thread.fp_regs.fpc));
 	/* Check for vector register enablement */
 	if (MACHINE_HAS_VX && !current->thread.vxrs &&
 	    (current->thread.fp_regs.fpc & FPC_DXC_MASK) == 0xfe00) {
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 33082d0..b33f661 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -31,8 +31,6 @@
 #define ALLOC_ORDER	2
 #define FRAG_MASK	0x03
 
-int HPAGE_SHIFT;
-
 unsigned long *crst_table_alloc(struct mm_struct *mm)
 {
 	struct page *page = alloc_pages(GFP_KERNEL, ALLOC_ORDER);
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index fee782a..8d2e516 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -448,13 +448,13 @@
 		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
 			      BPF_REG_1, offsetof(struct sk_buff, data));
 	}
-	/* BPF compatibility: clear A (%b7) and X (%b8) registers */
-	if (REG_SEEN(BPF_REG_7))
-		/* lghi %b7,0 */
-		EMIT4_IMM(0xa7090000, BPF_REG_7, 0);
-	if (REG_SEEN(BPF_REG_8))
-		/* lghi %b8,0 */
-		EMIT4_IMM(0xa7090000, BPF_REG_8, 0);
+	/* BPF compatibility: clear A (%b0) and X (%b7) registers */
+	if (REG_SEEN(BPF_REG_A))
+		/* lghi %ba,0 */
+		EMIT4_IMM(0xa7090000, BPF_REG_A, 0);
+	if (REG_SEEN(BPF_REG_X))
+		/* lghi %bx,0 */
+		EMIT4_IMM(0xa7090000, BPF_REG_X, 0);
 }
 
 /*
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index bc927a0..9cfa2ff 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -16,6 +16,7 @@
 #include <linux/fs.h>
 #include <linux/module.h>
 #include <asm/processor.h>
+#include <asm/perf_event.h>
 
 #include "../../../drivers/oprofile/oprof.h"
 
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
index 138fb3d..92ffe39 100644
--- a/arch/score/include/asm/Kbuild
+++ b/arch/score/include/asm/Kbuild
@@ -7,6 +7,7 @@
 generic-y += cputime.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += sections.h
 generic-y += trace_clock.h
diff --git a/arch/score/include/asm/mm-arch-hooks.h b/arch/score/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 5e38689..0000000
--- a/arch/score/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_SCORE_MM_ARCH_HOOKS_H
-#define _ASM_SCORE_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_SCORE_MM_ARCH_HOOKS_H */
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 9ac4626..aac452b 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -16,6 +16,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += param.h
diff --git a/arch/sh/include/asm/mm-arch-hooks.h b/arch/sh/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 1808729..0000000
--- a/arch/sh/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_SH_MM_ARCH_HOOKS_H
-#define _ASM_SH_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_SH_MM_ARCH_HOOKS_H */
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index 2b2a69d..e9286188 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -12,6 +12,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += module.h
 generic-y += mutex.h
 generic-y += preempt.h
diff --git a/arch/sparc/include/asm/mm-arch-hooks.h b/arch/sparc/include/asm/mm-arch-hooks.h
deleted file mode 100644
index b89ba44..0000000
--- a/arch/sparc/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_SPARC_MM_ARCH_HOOKS_H
-#define _ASM_SPARC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_SPARC_MM_ARCH_HOOKS_H */
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index d536544..d8a8431 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -19,6 +19,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += msgbuf.h
 generic-y += mutex.h
 generic-y += param.h
diff --git a/arch/tile/include/asm/mm-arch-hooks.h b/arch/tile/include/asm/mm-arch-hooks.h
deleted file mode 100644
index d1709ea..0000000
--- a/arch/tile/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_TILE_MM_ARCH_HOOKS_H
-#define _ASM_TILE_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_TILE_MM_ARCH_HOOKS_H */
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index 99c9ff8..6b755d1 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -1139,7 +1139,7 @@
 
 void __init free_initrd_mem(unsigned long begin, unsigned long end)
 {
-	free_bootmem(__pa(begin), end - begin);
+	free_bootmem_late(__pa(begin), end - begin);
 }
 
 static int __init setup_initrd(char *str)
diff --git a/arch/tile/lib/memcpy_user_64.c b/arch/tile/lib/memcpy_user_64.c
index 88c7016..97bbb60 100644
--- a/arch/tile/lib/memcpy_user_64.c
+++ b/arch/tile/lib/memcpy_user_64.c
@@ -28,7 +28,7 @@
 #define _ST(p, inst, v)						\
 	({							\
 		asm("1: " #inst " %0, %1;"			\
-		    ".pushsection .coldtext.memcpy,\"ax\";"	\
+		    ".pushsection .coldtext,\"ax\";"	\
 		    "2: { move r0, %2; jrp lr };"		\
 		    ".section __ex_table,\"a\";"		\
 		    ".align 8;"					\
@@ -41,7 +41,7 @@
 	({							\
 		unsigned long __v;				\
 		asm("1: " #inst " %0, %1;"			\
-		    ".pushsection .coldtext.memcpy,\"ax\";"	\
+		    ".pushsection .coldtext,\"ax\";"	\
 		    "2: { move r0, %2; jrp lr };"		\
 		    ".section __ex_table,\"a\";"		\
 		    ".align 8;"					\
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
index 3d63ff6..149ec55 100644
--- a/arch/um/include/asm/Kbuild
+++ b/arch/um/include/asm/Kbuild
@@ -16,6 +16,7 @@
 generic-y += irq_work.h
 generic-y += kdebug.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mutex.h
 generic-y += param.h
 generic-y += pci.h
diff --git a/arch/um/include/asm/mm-arch-hooks.h b/arch/um/include/asm/mm-arch-hooks.h
deleted file mode 100644
index a7c8b0d..0000000
--- a/arch/um/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_UM_MM_ARCH_HOOKS_H
-#define _ASM_UM_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_UM_MM_ARCH_HOOKS_H */
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
index d12b377..1fc7a28 100644
--- a/arch/unicore32/include/asm/Kbuild
+++ b/arch/unicore32/include/asm/Kbuild
@@ -26,6 +26,7 @@
 generic-y += kmap_types.h
 generic-y += local.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += module.h
 generic-y += msgbuf.h
diff --git a/arch/unicore32/include/asm/mm-arch-hooks.h b/arch/unicore32/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 4d79a85..0000000
--- a/arch/unicore32/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_UNICORE32_MM_ARCH_HOOKS_H
-#define _ASM_UNICORE32_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_UNICORE32_MM_ARCH_HOOKS_H */
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 55bced1..b3a1a5d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -41,6 +41,7 @@
 	select ARCH_USE_CMPXCHG_LOCKREF		if X86_64
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
+	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_IPC_PARSE_VERSION	if X86_32
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -254,6 +255,11 @@
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0xdffffc0000000000
+
 config HAVE_INTEL_TXT
 	def_bool y
 	depends on INTEL_IOMMU && ACPI
@@ -2015,7 +2021,7 @@
 
 	  To compile command line arguments into the kernel,
 	  set this option to 'Y', then fill in the
-	  the boot arguments in CONFIG_CMDLINE.
+	  boot arguments in CONFIG_CMDLINE.
 
 	  Systems with fully functional boot loaders (i.e. non-embedded)
 	  should leave this option set to 'N'.
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index a15893d..d8c0d32 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -297,6 +297,18 @@
 
 	  If unsure, say N.
 
+config DEBUG_ENTRY
+	bool "Debug low-level entry code"
+	depends on DEBUG_KERNEL
+	---help---
+	  This option enables sanity checks in x86's low-level entry code.
+	  Some of these sanity checks may slow down kernel entries and
+	  exits or otherwise impact performance.
+
+	  This is currently used to help test NMI code.
+
+	  If unsure, say N.
+
 config DEBUG_NMI_SELFTEST
 	bool "NMI Selftest"
 	depends on DEBUG_KERNEL && X86_LOCAL_APIC
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 2c82bd1..7d69afd 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -1193,6 +1193,10 @@
 		unsigned int e820_type = 0;
 		unsigned long m = efi->efi_memmap;
 
+#ifdef CONFIG_X86_64
+		m |= (u64)efi->efi_memmap_hi << 32;
+#endif
+
 		d = (efi_memory_desc_t *)(m + (i * efi->efi_memdesc_size));
 		switch (d->type) {
 		case EFI_RESERVED_TYPE:
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 3bb2c43..8cb3e43 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1237,11 +1237,12 @@
 	 *  If the variable is not set and the stack is not the NMI
 	 *  stack then:
 	 *    o Set the special variable on the stack
-	 *    o Copy the interrupt frame into a "saved" location on the stack
-	 *    o Copy the interrupt frame into a "copy" location on the stack
+	 *    o Copy the interrupt frame into an "outermost" location on the
+	 *      stack
+	 *    o Copy the interrupt frame into an "iret" location on the stack
 	 *    o Continue processing the NMI
 	 *  If the variable is set or the previous stack is the NMI stack:
-	 *    o Modify the "copy" location to jump to the repeate_nmi
+	 *    o Modify the "iret" location to jump to the repeat_nmi
 	 *    o return back to the first NMI
 	 *
 	 * Now on exit of the first NMI, we first clear the stack variable
@@ -1250,31 +1251,151 @@
 	 * a nested NMI that updated the copy interrupt stack frame, a
 	 * jump will be made to the repeat_nmi code that will handle the second
 	 * NMI.
+	 *
+	 * However, espfix prevents us from directly returning to userspace
+	 * with a single IRET instruction.  Similarly, IRET to user mode
+	 * can fault.  We therefore handle NMIs from user space like
+	 * other IST entries.
 	 */
 
 	/* Use %rdx as our temp variable throughout */
 	pushq	%rdx
 
-	/*
-	 * If %cs was not the kernel segment, then the NMI triggered in user
-	 * space, which means it is definitely not nested.
-	 */
-	cmpl	$__KERNEL_CS, 16(%rsp)
-	jne	first_nmi
+	testb	$3, CS-RIP+8(%rsp)
+	jz	.Lnmi_from_kernel
 
 	/*
-	 * Check the special variable on the stack to see if NMIs are
-	 * executing.
+	 * NMI from user mode.  We need to run on the thread stack, but we
+	 * can't go through the normal entry paths: NMIs are masked, and
+	 * we don't want to enable interrupts, because then we'll end
+	 * up in an awkward situation in which IRQs are on but NMIs
+	 * are off.
+	 */
+
+	SWAPGS
+	cld
+	movq	%rsp, %rdx
+	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+	pushq	5*8(%rdx)	/* pt_regs->ss */
+	pushq	4*8(%rdx)	/* pt_regs->rsp */
+	pushq	3*8(%rdx)	/* pt_regs->flags */
+	pushq	2*8(%rdx)	/* pt_regs->cs */
+	pushq	1*8(%rdx)	/* pt_regs->rip */
+	pushq   $-1		/* pt_regs->orig_ax */
+	pushq   %rdi		/* pt_regs->di */
+	pushq   %rsi		/* pt_regs->si */
+	pushq   (%rdx)		/* pt_regs->dx */
+	pushq   %rcx		/* pt_regs->cx */
+	pushq   %rax		/* pt_regs->ax */
+	pushq   %r8		/* pt_regs->r8 */
+	pushq   %r9		/* pt_regs->r9 */
+	pushq   %r10		/* pt_regs->r10 */
+	pushq   %r11		/* pt_regs->r11 */
+	pushq	%rbx		/* pt_regs->rbx */
+	pushq	%rbp		/* pt_regs->rbp */
+	pushq	%r12		/* pt_regs->r12 */
+	pushq	%r13		/* pt_regs->r13 */
+	pushq	%r14		/* pt_regs->r14 */
+	pushq	%r15		/* pt_regs->r15 */
+
+	/*
+	 * At this point we no longer need to worry about stack damage
+	 * due to nesting -- we're on the normal thread stack and we're
+	 * done with the NMI stack.
+	 */
+
+	movq	%rsp, %rdi
+	movq	$-1, %rsi
+	call	do_nmi
+
+	/*
+	 * Return back to user mode.  We must *not* do the normal exit
+	 * work, because we don't want to enable interrupts.  Fortunately,
+	 * do_nmi doesn't modify pt_regs.
+	 */
+	SWAPGS
+	jmp	restore_c_regs_and_iret
+
+.Lnmi_from_kernel:
+	/*
+	 * Here's what our stack frame will look like:
+	 * +---------------------------------------------------------+
+	 * | original SS                                             |
+	 * | original Return RSP                                     |
+	 * | original RFLAGS                                         |
+	 * | original CS                                             |
+	 * | original RIP                                            |
+	 * +---------------------------------------------------------+
+	 * | temp storage for rdx                                    |
+	 * +---------------------------------------------------------+
+	 * | "NMI executing" variable                                |
+	 * +---------------------------------------------------------+
+	 * | iret SS          } Copied from "outermost" frame        |
+	 * | iret Return RSP  } on each loop iteration; overwritten  |
+	 * | iret RFLAGS      } by a nested NMI to force another     |
+	 * | iret CS          } iteration if needed.                 |
+	 * | iret RIP         }                                      |
+	 * +---------------------------------------------------------+
+	 * | outermost SS          } initialized in first_nmi;       |
+	 * | outermost Return RSP  } will not be changed before      |
+	 * | outermost RFLAGS      } NMI processing is done.         |
+	 * | outermost CS          } Copied to "iret" frame on each  |
+	 * | outermost RIP         } iteration.                      |
+	 * +---------------------------------------------------------+
+	 * | pt_regs                                                 |
+	 * +---------------------------------------------------------+
+	 *
+	 * The "original" frame is used by hardware.  Before re-enabling
+	 * NMIs, we need to be done with it, and we need to leave enough
+	 * space for the asm code here.
+	 *
+	 * We return by executing IRET while RSP points to the "iret" frame.
+	 * That will either return for real or it will loop back into NMI
+	 * processing.
+	 *
+	 * The "outermost" frame is copied to the "iret" frame on each
+	 * iteration of the loop, so each iteration starts with the "iret"
+	 * frame pointing to the final return target.
+	 */
+
+	/*
+	 * Determine whether we're a nested NMI.
+	 *
+	 * If we interrupted kernel code between repeat_nmi and
+	 * end_repeat_nmi, then we are a nested NMI.  We must not
+	 * modify the "iret" frame because it's being written by
+	 * the outer NMI.  That's okay; the outer NMI handler is
+	 * about to about to call do_nmi anyway, so we can just
+	 * resume the outer NMI.
+	 */
+
+	movq	$repeat_nmi, %rdx
+	cmpq	8(%rsp), %rdx
+	ja	1f
+	movq	$end_repeat_nmi, %rdx
+	cmpq	8(%rsp), %rdx
+	ja	nested_nmi_out
+1:
+
+	/*
+	 * Now check "NMI executing".  If it's set, then we're nested.
+	 * This will not detect if we interrupted an outer NMI just
+	 * before IRET.
 	 */
 	cmpl	$1, -8(%rsp)
 	je	nested_nmi
 
 	/*
-	 * Now test if the previous stack was an NMI stack.
-	 * We need the double check. We check the NMI stack to satisfy the
-	 * race when the first NMI clears the variable before returning.
-	 * We check the variable because the first NMI could be in a
-	 * breakpoint routine using a breakpoint stack.
+	 * Now test if the previous stack was an NMI stack.  This covers
+	 * the case where we interrupt an outer NMI after it clears
+	 * "NMI executing" but before IRET.  We need to be careful, though:
+	 * there is one case in which RSP could point to the NMI stack
+	 * despite there being no NMI active: naughty userspace controls
+	 * RSP at the very beginning of the SYSCALL targets.  We can
+	 * pull a fast one on naughty userspace, though: we program
+	 * SYSCALL to mask DF, so userspace cannot cause DF to be set
+	 * if it controls the kernel's RSP.  We set DF before we clear
+	 * "NMI executing".
 	 */
 	lea	6*8(%rsp), %rdx
 	/* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
@@ -1286,25 +1407,20 @@
 	cmpq	%rdx, 4*8(%rsp)
 	/* If it is below the NMI stack, it is a normal NMI */
 	jb	first_nmi
-	/* Ah, it is within the NMI stack, treat it as nested */
+
+	/* Ah, it is within the NMI stack. */
+
+	testb	$(X86_EFLAGS_DF >> 8), (3*8 + 1)(%rsp)
+	jz	first_nmi	/* RSP was user controlled. */
+
+	/* This is a nested NMI. */
 
 nested_nmi:
 	/*
-	 * Do nothing if we interrupted the fixup in repeat_nmi.
-	 * It's about to repeat the NMI handler, so we are fine
-	 * with ignoring this one.
+	 * Modify the "iret" frame to point to repeat_nmi, forcing another
+	 * iteration of NMI handling.
 	 */
-	movq	$repeat_nmi, %rdx
-	cmpq	8(%rsp), %rdx
-	ja	1f
-	movq	$end_repeat_nmi, %rdx
-	cmpq	8(%rsp), %rdx
-	ja	nested_nmi_out
-
-1:
-	/* Set up the interrupted NMIs stack to jump to repeat_nmi */
-	leaq	-1*8(%rsp), %rdx
-	movq	%rdx, %rsp
+	subq	$8, %rsp
 	leaq	-10*8(%rsp), %rdx
 	pushq	$__KERNEL_DS
 	pushq	%rdx
@@ -1318,61 +1434,42 @@
 nested_nmi_out:
 	popq	%rdx
 
-	/* No need to check faults here */
+	/* We are returning to kernel mode, so this cannot result in a fault. */
 	INTERRUPT_RETURN
 
 first_nmi:
-	/*
-	 * Because nested NMIs will use the pushed location that we
-	 * stored in rdx, we must keep that space available.
-	 * Here's what our stack frame will look like:
-	 * +-------------------------+
-	 * | original SS             |
-	 * | original Return RSP     |
-	 * | original RFLAGS         |
-	 * | original CS             |
-	 * | original RIP            |
-	 * +-------------------------+
-	 * | temp storage for rdx    |
-	 * +-------------------------+
-	 * | NMI executing variable  |
-	 * +-------------------------+
-	 * | copied SS               |
-	 * | copied Return RSP       |
-	 * | copied RFLAGS           |
-	 * | copied CS               |
-	 * | copied RIP              |
-	 * +-------------------------+
-	 * | Saved SS                |
-	 * | Saved Return RSP        |
-	 * | Saved RFLAGS            |
-	 * | Saved CS                |
-	 * | Saved RIP               |
-	 * +-------------------------+
-	 * | pt_regs                 |
-	 * +-------------------------+
-	 *
-	 * The saved stack frame is used to fix up the copied stack frame
-	 * that a nested NMI may change to make the interrupted NMI iret jump
-	 * to the repeat_nmi. The original stack frame and the temp storage
-	 * is also used by nested NMIs and can not be trusted on exit.
-	 */
-	/* Do not pop rdx, nested NMIs will corrupt that part of the stack */
+	/* Restore rdx. */
 	movq	(%rsp), %rdx
 
-	/* Set the NMI executing variable on the stack. */
-	pushq	$1
+	/* Make room for "NMI executing". */
+	pushq	$0
 
-	/* Leave room for the "copied" frame */
+	/* Leave room for the "iret" frame */
 	subq	$(5*8), %rsp
 
-	/* Copy the stack frame to the Saved frame */
+	/* Copy the "original" frame to the "outermost" frame */
 	.rept 5
 	pushq	11*8(%rsp)
 	.endr
 
 	/* Everything up to here is safe from nested NMIs */
 
+#ifdef CONFIG_DEBUG_ENTRY
+	/*
+	 * For ease of testing, unmask NMIs right away.  Disabled by
+	 * default because IRET is very expensive.
+	 */
+	pushq	$0		/* SS */
+	pushq	%rsp		/* RSP (minus 8 because of the previous push) */
+	addq	$8, (%rsp)	/* Fix up RSP */
+	pushfq			/* RFLAGS */
+	pushq	$__KERNEL_CS	/* CS */
+	pushq	$1f		/* RIP */
+	INTERRUPT_RETURN	/* continues at repeat_nmi below */
+1:
+#endif
+
+repeat_nmi:
 	/*
 	 * If there was a nested NMI, the first NMI's iret will return
 	 * here. But NMIs are still enabled and we can take another
@@ -1381,16 +1478,20 @@
 	 * it will just return, as we are about to repeat an NMI anyway.
 	 * This makes it safe to copy to the stack frame that a nested
 	 * NMI will update.
+	 *
+	 * RSP is pointing to "outermost RIP".  gsbase is unknown, but, if
+	 * we're repeating an NMI, gsbase has the same value that it had on
+	 * the first iteration.  paranoid_entry will load the kernel
+	 * gsbase if needed before we call do_nmi.  "NMI executing"
+	 * is zero.
 	 */
-repeat_nmi:
-	/*
-	 * Update the stack variable to say we are still in NMI (the update
-	 * is benign for the non-repeat case, where 1 was pushed just above
-	 * to this very stack slot).
-	 */
-	movq	$1, 10*8(%rsp)
+	movq	$1, 10*8(%rsp)		/* Set "NMI executing". */
 
-	/* Make another copy, this one may be modified by nested NMIs */
+	/*
+	 * Copy the "outermost" frame to the "iret" frame.  NMIs that nest
+	 * here must not modify the "iret" frame while we're writing to
+	 * it or it will end up containing garbage.
+	 */
 	addq	$(10*8), %rsp
 	.rept 5
 	pushq	-6*8(%rsp)
@@ -1399,9 +1500,9 @@
 end_repeat_nmi:
 
 	/*
-	 * Everything below this point can be preempted by a nested
-	 * NMI if the first NMI took an exception and reset our iret stack
-	 * so that we repeat another NMI.
+	 * Everything below this point can be preempted by a nested NMI.
+	 * If this happens, then the inner NMI will change the "iret"
+	 * frame to point back to repeat_nmi.
 	 */
 	pushq	$-1				/* ORIG_RAX: no syscall to restart */
 	ALLOC_PT_GPREGS_ON_STACK
@@ -1415,28 +1516,11 @@
 	 */
 	call	paranoid_entry
 
-	/*
-	 * Save off the CR2 register. If we take a page fault in the NMI then
-	 * it could corrupt the CR2 value. If the NMI preempts a page fault
-	 * handler before it was able to read the CR2 register, and then the
-	 * NMI itself takes a page fault, the page fault that was preempted
-	 * will read the information from the NMI page fault and not the
-	 * origin fault. Save it off and restore it if it changes.
-	 * Use the r12 callee-saved register.
-	 */
-	movq	%cr2, %r12
-
 	/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
 	movq	%rsp, %rdi
 	movq	$-1, %rsi
 	call	do_nmi
 
-	/* Did the NMI take a page fault? Restore cr2 if it did */
-	movq	%cr2, %rcx
-	cmpq	%rcx, %r12
-	je	1f
-	movq	%r12, %cr2
-1:
 	testl	%ebx, %ebx			/* swapgs needed? */
 	jnz	nmi_restore
 nmi_swapgs:
@@ -1444,11 +1528,26 @@
 nmi_restore:
 	RESTORE_EXTRA_REGS
 	RESTORE_C_REGS
-	/* Pop the extra iret frame at once */
+
+	/* Point RSP at the "iret" frame. */
 	REMOVE_PT_GPREGS_FROM_STACK 6*8
 
-	/* Clear the NMI executing stack variable */
-	movq	$0, 5*8(%rsp)
+	/*
+	 * Clear "NMI executing".  Set DF first so that we can easily
+	 * distinguish the remaining code between here and IRET from
+	 * the SYSCALL entry and exit paths.  On a native kernel, we
+	 * could just inspect RIP, but, on paravirt kernels,
+	 * INTERRUPT_RETURN can translate into a jump into a
+	 * hypercall page.
+	 */
+	std
+	movq	$0, 5*8(%rsp)		/* clear "NMI executing" */
+
+	/*
+	 * INTERRUPT_RETURN reads the "iret" frame and exits the NMI
+	 * stack in a single instruction.  We are returning to kernel
+	 * mode, so this cannot result in a fault.
+	 */
 	INTERRUPT_RETURN
 END(nmi)
 
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index bb187a6..5a18447 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -205,7 +205,6 @@
 	movl	RDX(%rsp), %edx		/* arg3 */
 	movl	RSI(%rsp), %ecx		/* arg4 */
 	movl	RDI(%rsp), %r8d		/* arg5 */
-	movl	%ebp, %r9d		/* arg6 */
 	.endm
 
 	.macro auditsys_exit exit
@@ -236,6 +235,7 @@
 
 sysenter_auditsys:
 	auditsys_entry_common
+	movl	%ebp, %r9d		/* reload 6th syscall arg */
 	jmp	sysenter_dispatch
 
 sysexit_audit:
@@ -336,7 +336,7 @@
 	 * 32-bit zero extended:
 	 */
 	ASM_STAC
-1:	movl	(%r8), %ebp
+1:	movl	(%r8), %r9d
 	_ASM_EXTABLE(1b, ia32_badarg)
 	ASM_CLAC
 	orl	$TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
@@ -346,7 +346,7 @@
 cstar_do_call:
 	/* 32-bit syscall -> 64-bit C ABI argument conversion */
 	movl	%edi, %r8d		/* arg5 */
-	movl	%ebp, %r9d		/* arg6 */
+	/* r9 already loaded */		/* arg6 */
 	xchg	%ecx, %esi		/* rsi:arg2, rcx:arg4 */
 	movl	%ebx, %edi		/* arg1 */
 	movl	%edx, %edx		/* arg3 (zero extension) */
@@ -358,7 +358,6 @@
 	call	*ia32_sys_call_table(, %rax, 8)
 	movq	%rax, RAX(%rsp)
 1:
-	movl	RCX(%rsp), %ebp
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl	$_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
@@ -392,7 +391,9 @@
 
 #ifdef CONFIG_AUDITSYSCALL
 cstar_auditsys:
+	movl	%r9d, R9(%rsp)		/* register to be clobbered by call */
 	auditsys_entry_common
+	movl	R9(%rsp), %r9d		/* reload 6th syscall arg */
 	jmp	cstar_dispatch
 
 sysretl_audit:
@@ -404,14 +405,16 @@
 	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
 	jz	cstar_auditsys
 #endif
+	xchgl	%r9d, %ebp
 	SAVE_EXTRA_REGS
 	xorl	%eax, %eax		/* Do not leak kernel information */
 	movq	%rax, R11(%rsp)
 	movq	%rax, R10(%rsp)
-	movq	%rax, R9(%rsp)
+	movq	%r9, R9(%rsp)
 	movq	%rax, R8(%rsp)
 	movq	%rsp, %rdi		/* &pt_regs -> arg1 */
 	call	syscall_trace_enter
+	movl	R9(%rsp), %r9d
 
 	/* Reload arg registers from stack. (see sysenter_tracesys) */
 	movl	RCX(%rsp), %ecx
@@ -421,6 +424,7 @@
 	movl	%eax, %eax		/* zero extension */
 
 	RESTORE_EXTRA_REGS
+	xchgl	%ebp, %r9d
 	jmp	cstar_do_call
 END(entry_SYSCALL_compat)
 
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index 4dd1f2d..aeac434 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -9,3 +9,4 @@
 generic-y += dma-contiguous.h
 generic-y += early_ioremap.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index a0bf89f..4e10d73 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -280,21 +280,6 @@
 	set_ldt(NULL, 0);
 }
 
-/*
- * load one particular LDT into the current CPU
- */
-static inline void load_LDT_nolock(mm_context_t *pc)
-{
-	set_ldt(pc->ldt, pc->size);
-}
-
-static inline void load_LDT(mm_context_t *pc)
-{
-	preempt_disable();
-	load_LDT_nolock(pc);
-	preempt_enable();
-}
-
 static inline unsigned long get_desc_base(const struct desc_struct *desc)
 {
 	return (unsigned)(desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24));
diff --git a/arch/x86/include/asm/espfix.h b/arch/x86/include/asm/espfix.h
index 99efebb..ca3ce9a 100644
--- a/arch/x86/include/asm/espfix.h
+++ b/arch/x86/include/asm/espfix.h
@@ -9,7 +9,7 @@
 DECLARE_PER_CPU_READ_MOSTLY(unsigned long, espfix_waddr);
 
 extern void init_espfix_bsp(void);
-extern void init_espfix_ap(void);
+extern void init_espfix_ap(int cpu);
 
 #endif /* CONFIG_X86_64 */
 
diff --git a/arch/x86/include/asm/fpu/types.h b/arch/x86/include/asm/fpu/types.h
index 0637826..c49c517 100644
--- a/arch/x86/include/asm/fpu/types.h
+++ b/arch/x86/include/asm/fpu/types.h
@@ -189,6 +189,7 @@
 	struct fxregs_state		fxsave;
 	struct swregs_state		soft;
 	struct xregs_state		xsave;
+	u8 __padding[PAGE_SIZE];
 };
 
 /*
@@ -198,40 +199,6 @@
  */
 struct fpu {
 	/*
-	 * @state:
-	 *
-	 * In-memory copy of all FPU registers that we save/restore
-	 * over context switches. If the task is using the FPU then
-	 * the registers in the FPU are more recent than this state
-	 * copy. If the task context-switches away then they get
-	 * saved here and represent the FPU state.
-	 *
-	 * After context switches there may be a (short) time period
-	 * during which the in-FPU hardware registers are unchanged
-	 * and still perfectly match this state, if the tasks
-	 * scheduled afterwards are not using the FPU.
-	 *
-	 * This is the 'lazy restore' window of optimization, which
-	 * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'.
-	 *
-	 * We detect whether a subsequent task uses the FPU via setting
-	 * CR0::TS to 1, which causes any FPU use to raise a #NM fault.
-	 *
-	 * During this window, if the task gets scheduled again, we
-	 * might be able to skip having to do a restore from this
-	 * memory buffer to the hardware registers - at the cost of
-	 * incurring the overhead of #NM fault traps.
-	 *
-	 * Note that on modern CPUs that support the XSAVEOPT (or other
-	 * optimized XSAVE instructions), we don't use #NM traps anymore,
-	 * as the hardware can track whether FPU registers need saving
-	 * or not. On such CPUs we activate the non-lazy ('eagerfpu')
-	 * logic, which unconditionally saves/restores all FPU state
-	 * across context switches. (if FPU state exists.)
-	 */
-	union fpregs_state		state;
-
-	/*
 	 * @last_cpu:
 	 *
 	 * Records the last CPU on which this context was loaded into
@@ -288,6 +255,43 @@
 	 * deal with bursty apps that only use the FPU for a short time:
 	 */
 	unsigned char			counter;
+	/*
+	 * @state:
+	 *
+	 * In-memory copy of all FPU registers that we save/restore
+	 * over context switches. If the task is using the FPU then
+	 * the registers in the FPU are more recent than this state
+	 * copy. If the task context-switches away then they get
+	 * saved here and represent the FPU state.
+	 *
+	 * After context switches there may be a (short) time period
+	 * during which the in-FPU hardware registers are unchanged
+	 * and still perfectly match this state, if the tasks
+	 * scheduled afterwards are not using the FPU.
+	 *
+	 * This is the 'lazy restore' window of optimization, which
+	 * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'.
+	 *
+	 * We detect whether a subsequent task uses the FPU via setting
+	 * CR0::TS to 1, which causes any FPU use to raise a #NM fault.
+	 *
+	 * During this window, if the task gets scheduled again, we
+	 * might be able to skip having to do a restore from this
+	 * memory buffer to the hardware registers - at the cost of
+	 * incurring the overhead of #NM fault traps.
+	 *
+	 * Note that on modern CPUs that support the XSAVEOPT (or other
+	 * optimized XSAVE instructions), we don't use #NM traps anymore,
+	 * as the hardware can track whether FPU registers need saving
+	 * or not. On such CPUs we activate the non-lazy ('eagerfpu')
+	 * logic, which unconditionally saves/restores all FPU state
+	 * across context switches. (if FPU state exists.)
+	 */
+	union fpregs_state		state;
+	/*
+	 * WARNING: 'state' is dynamically-sized.  Do not put
+	 * anything after it here.
+	 */
 };
 
 #endif /* _ASM_X86_FPU_H */
diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
index 200ec2e..cd0310e 100644
--- a/arch/x86/include/asm/intel_pmc_ipc.h
+++ b/arch/x86/include/asm/intel_pmc_ipc.h
@@ -25,36 +25,9 @@
 
 #if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
 
-/*
- * intel_pmc_ipc_simple_command
- * @cmd: command
- * @sub: sub type
- */
 int intel_pmc_ipc_simple_command(int cmd, int sub);
-
-/*
- * intel_pmc_ipc_raw_cmd
- * @cmd: command
- * @sub: sub type
- * @in: input data
- * @inlen: input length in bytes
- * @out: output data
- * @outlen: output length in dwords
- * @sptr: data writing to SPTR register
- * @dptr: data writing to DPTR register
- */
 int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen,
 		u32 *out, u32 outlen, u32 dptr, u32 sptr);
-
-/*
- * intel_pmc_ipc_command
- * @cmd: command
- * @sub: sub type
- * @in: input data
- * @inlen: input length in bytes
- * @out: output data
- * @outlen: output length in dwords
- */
 int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
 		u32 *out, u32 outlen);
 
diff --git a/arch/x86/include/asm/kasan.h b/arch/x86/include/asm/kasan.h
index 8b22422..74a2a8d 100644
--- a/arch/x86/include/asm/kasan.h
+++ b/arch/x86/include/asm/kasan.h
@@ -14,15 +14,11 @@
 
 #ifndef __ASSEMBLY__
 
-extern pte_t kasan_zero_pte[];
-extern pte_t kasan_zero_pmd[];
-extern pte_t kasan_zero_pud[];
-
 #ifdef CONFIG_KASAN
-void __init kasan_map_early_shadow(pgd_t *pgd);
+void __init kasan_early_init(void);
 void __init kasan_init(void);
 #else
-static inline void kasan_map_early_shadow(pgd_t *pgd) { }
+static inline void kasan_early_init(void) { }
 static inline void kasan_init(void) { }
 #endif
 
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 2a7f5d7..49ec903 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -604,6 +604,8 @@
 	bool iommu_noncoherent;
 #define __KVM_HAVE_ARCH_NONCOHERENT_DMA
 	atomic_t noncoherent_dma_count;
+#define __KVM_HAVE_ARCH_ASSIGNED_DEVICE
+	atomic_t assigned_device_count;
 	struct kvm_pic *vpic;
 	struct kvm_ioapic *vioapic;
 	struct kvm_pit *vpit;
diff --git a/arch/x86/include/asm/mm-arch-hooks.h b/arch/x86/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 4e881a3..0000000
--- a/arch/x86/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_X86_MM_ARCH_HOOKS_H
-#define _ASM_X86_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_X86_MM_ARCH_HOOKS_H */
diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h
index 09b9620..364d274 100644
--- a/arch/x86/include/asm/mmu.h
+++ b/arch/x86/include/asm/mmu.h
@@ -9,8 +9,7 @@
  * we put the segment information here.
  */
 typedef struct {
-	void *ldt;
-	int size;
+	struct ldt_struct *ldt;
 
 #ifdef CONFIG_X86_64
 	/* True if mm supports a task running in 32 bit compatibility mode. */
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 5e8daee..984abfe 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -23,7 +23,7 @@
 
 static inline void load_mm_cr4(struct mm_struct *mm)
 {
-	if (static_key_true(&rdpmc_always_available) ||
+	if (static_key_false(&rdpmc_always_available) ||
 	    atomic_read(&mm->context.perf_rdpmc_allowed))
 		cr4_set_bits(X86_CR4_PCE);
 	else
@@ -34,6 +34,50 @@
 #endif
 
 /*
+ * ldt_structs can be allocated, used, and freed, but they are never
+ * modified while live.
+ */
+struct ldt_struct {
+	/*
+	 * Xen requires page-aligned LDTs with special permissions.  This is
+	 * needed to prevent us from installing evil descriptors such as
+	 * call gates.  On native, we could merge the ldt_struct and LDT
+	 * allocations, but it's not worth trying to optimize.
+	 */
+	struct desc_struct *entries;
+	int size;
+};
+
+static inline void load_mm_ldt(struct mm_struct *mm)
+{
+	struct ldt_struct *ldt;
+
+	/* lockless_dereference synchronizes with smp_store_release */
+	ldt = lockless_dereference(mm->context.ldt);
+
+	/*
+	 * Any change to mm->context.ldt is followed by an IPI to all
+	 * CPUs with the mm active.  The LDT will not be freed until
+	 * after the IPI is handled by all such CPUs.  This means that,
+	 * if the ldt_struct changes before we return, the values we see
+	 * will be safe, and the new values will be loaded before we run
+	 * any user code.
+	 *
+	 * NB: don't try to convert this to use RCU without extreme care.
+	 * We would still need IRQs off, because we don't want to change
+	 * the local LDT after an IPI loaded a newer value than the one
+	 * that we can see.
+	 */
+
+	if (unlikely(ldt))
+		set_ldt(ldt->entries, ldt->size);
+	else
+		clear_LDT();
+
+	DEBUG_LOCKS_WARN_ON(preemptible());
+}
+
+/*
  * Used for LDT copy/destruction.
  */
 int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
@@ -78,12 +122,12 @@
 		 * was called and then modify_ldt changed
 		 * prev->context.ldt but suppressed an IPI to this CPU.
 		 * In this case, prev->context.ldt != NULL, because we
-		 * never free an LDT while the mm still exists.  That
-		 * means that next->context.ldt != prev->context.ldt,
-		 * because mms never share an LDT.
+		 * never set context.ldt to NULL while the mm still
+		 * exists.  That means that next->context.ldt !=
+		 * prev->context.ldt, because mms never share an LDT.
 		 */
 		if (unlikely(prev->context.ldt != next->context.ldt))
-			load_LDT_nolock(&next->context);
+			load_mm_ldt(next);
 	}
 #ifdef CONFIG_SMP
 	  else {
@@ -106,7 +150,7 @@
 			load_cr3(next->pgd);
 			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
 			load_mm_cr4(next);
-			load_LDT_nolock(&next->context);
+			load_mm_ldt(next);
 		}
 	}
 #endif
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 43e6519..944f178 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -390,9 +390,6 @@
 #endif
 	unsigned long		gs;
 
-	/* Floating point and extended processor state */
-	struct fpu		fpu;
-
 	/* Save middle states of ptrace breakpoints */
 	struct perf_event	*ptrace_bps[HBP_NUM];
 	/* Debug status used for traps, single steps, etc... */
@@ -418,6 +415,13 @@
 	unsigned long		iopl;
 	/* Max allowed port in the bitmap, in bytes: */
 	unsigned		io_bitmap_max;
+
+	/* Floating point and extended processor state */
+	struct fpu		fpu;
+	/*
+	 * WARNING: 'fpu' is dynamically-sized.  It *MUST* be at
+	 * the end.
+	 */
 };
 
 /*
diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
index 8fba544..f36d56b 100644
--- a/arch/x86/include/uapi/asm/hyperv.h
+++ b/arch/x86/include/uapi/asm/hyperv.h
@@ -108,6 +108,8 @@
 #define HV_X64_HYPERCALL_PARAMS_XMM_AVAILABLE		(1 << 4)
 /* Support for a virtual guest idle state is available */
 #define HV_X64_GUEST_IDLE_STATE_AVAILABLE		(1 << 5)
+/* Guest crash data handler available */
+#define HV_X64_GUEST_CRASH_MSR_AVAILABLE		(1 << 10)
 
 /*
  * Implementation recommendations. Indicates which behaviors the hypervisor
diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h
index a4ae82e..cd54147 100644
--- a/arch/x86/include/uapi/asm/kvm.h
+++ b/arch/x86/include/uapi/asm/kvm.h
@@ -354,7 +354,7 @@
 struct kvm_sync_regs {
 };
 
-#define KVM_QUIRK_LINT0_REENABLED	(1 << 0)
-#define KVM_QUIRK_CD_NW_CLEARED		(1 << 1)
+#define KVM_X86_QUIRK_LINT0_REENABLED	(1 << 0)
+#define KVM_X86_QUIRK_CD_NW_CLEARED	(1 << 1)
 
 #endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 845dc0d..206052e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -943,7 +943,7 @@
 	 */
 	if (irq < nr_legacy_irqs() && data->count == 1) {
 		if (info->ioapic_trigger != data->trigger)
-			mp_register_handler(irq, data->trigger);
+			mp_register_handler(irq, info->ioapic_trigger);
 		data->entry.trigger = data->trigger = info->ioapic_trigger;
 		data->entry.polarity = data->polarity = info->ioapic_polarity;
 	}
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 28eba2d..f813261 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -409,12 +409,6 @@
 	int irq, vector;
 	struct apic_chip_data *data;
 
-	/*
-	 * vector_lock will make sure that we don't run into irq vector
-	 * assignments that might be happening on another cpu in parallel,
-	 * while we setup our initial vector to irq mappings.
-	 */
-	raw_spin_lock(&vector_lock);
 	/* Mark the inuse vectors */
 	for_each_active_irq(irq) {
 		data = apic_chip_data(irq_get_irq_data(irq));
@@ -436,16 +430,16 @@
 		if (!cpumask_test_cpu(cpu, data->domain))
 			per_cpu(vector_irq, cpu)[vector] = VECTOR_UNDEFINED;
 	}
-	raw_spin_unlock(&vector_lock);
 }
 
 /*
- * Setup the vector to irq mappings.
+ * Setup the vector to irq mappings. Must be called with vector_lock held.
  */
 void setup_vector_irq(int cpu)
 {
 	int irq;
 
+	lockdep_assert_held(&vector_lock);
 	/*
 	 * On most of the platforms, legacy PIC delivers the interrupts on the
 	 * boot cpu. But there are certain platforms where PIC interrupts are
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 922c5e0..cb9e5df 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1410,7 +1410,7 @@
 	load_sp0(t, &current->thread);
 	set_tss_desc(cpu, t);
 	load_TR_desc();
-	load_LDT(&init_mm.context);
+	load_mm_ldt(&init_mm);
 
 	clear_all_debug_regs();
 	dbg_restore_debug_regs();
@@ -1459,7 +1459,7 @@
 	load_sp0(t, thread);
 	set_tss_desc(cpu, t);
 	load_TR_desc();
-	load_LDT(&init_mm.context);
+	load_mm_ldt(&init_mm);
 
 	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
 
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 3658de4..9469dfa 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -2179,21 +2179,25 @@
 	int idx = segment >> 3;
 
 	if ((segment & SEGMENT_TI_MASK) == SEGMENT_LDT) {
+		struct ldt_struct *ldt;
+
 		if (idx > LDT_ENTRIES)
 			return 0;
 
-		if (idx > current->active_mm->context.size)
+		/* IRQs are off, so this synchronizes with smp_store_release */
+		ldt = lockless_dereference(current->active_mm->context.ldt);
+		if (!ldt || idx > ldt->size)
 			return 0;
 
-		desc = current->active_mm->context.ldt;
+		desc = &ldt->entries[idx];
 	} else {
 		if (idx > GDT_ENTRIES)
 			return 0;
 
-		desc = raw_cpu_ptr(gdt_page.gdt);
+		desc = raw_cpu_ptr(gdt_page.gdt) + idx;
 	}
 
-	return get_desc_base(desc + idx);
+	return get_desc_base(desc);
 }
 
 #ifdef CONFIG_COMPAT
diff --git a/arch/x86/kernel/cpu/perf_event_intel_cqm.c b/arch/x86/kernel/cpu/perf_event_intel_cqm.c
index 1880761..63eb68b 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_cqm.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_cqm.c
@@ -952,6 +952,14 @@
 		return 0;
 
 	/*
+	 * Getting up-to-date values requires an SMP IPI which is not
+	 * possible if we're being called in interrupt context. Return
+	 * the cached values instead.
+	 */
+	if (unlikely(in_interrupt()))
+		goto out;
+
+	/*
 	 * Notice that we don't perform the reading of an RMID
 	 * atomically, because we can't hold a spin lock across the
 	 * IPIs.
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 89427d8..eec40f5 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -175,7 +175,9 @@
 	}
 
 	if (*s) {
-		if (kstrtoul(s, 0, &baud) < 0 || baud == 0)
+		baud = simple_strtoull(s, &e, 0);
+
+		if (baud == 0 || s == e)
 			baud = DEFAULT_BAUD;
 	}
 
diff --git a/arch/x86/kernel/espfix_64.c b/arch/x86/kernel/espfix_64.c
index f5d0730..ce95676 100644
--- a/arch/x86/kernel/espfix_64.c
+++ b/arch/x86/kernel/espfix_64.c
@@ -131,25 +131,24 @@
 	init_espfix_random();
 
 	/* The rest is the same as for any other processor */
-	init_espfix_ap();
+	init_espfix_ap(0);
 }
 
-void init_espfix_ap(void)
+void init_espfix_ap(int cpu)
 {
-	unsigned int cpu, page;
+	unsigned int page;
 	unsigned long addr;
 	pud_t pud, *pud_p;
 	pmd_t pmd, *pmd_p;
 	pte_t pte, *pte_p;
-	int n;
+	int n, node;
 	void *stack_page;
 	pteval_t ptemask;
 
 	/* We only have to do this once... */
-	if (likely(this_cpu_read(espfix_stack)))
+	if (likely(per_cpu(espfix_stack, cpu)))
 		return;		/* Already initialized */
 
-	cpu = smp_processor_id();
 	addr = espfix_base_addr(cpu);
 	page = cpu/ESPFIX_STACKS_PER_PAGE;
 
@@ -165,12 +164,15 @@
 	if (stack_page)
 		goto unlock_done;
 
+	node = cpu_to_node(cpu);
 	ptemask = __supported_pte_mask;
 
 	pud_p = &espfix_pud_page[pud_index(addr)];
 	pud = *pud_p;
 	if (!pud_present(pud)) {
-		pmd_p = (pmd_t *)__get_free_page(PGALLOC_GFP);
+		struct page *page = alloc_pages_node(node, PGALLOC_GFP, 0);
+
+		pmd_p = (pmd_t *)page_address(page);
 		pud = __pud(__pa(pmd_p) | (PGTABLE_PROT & ptemask));
 		paravirt_alloc_pmd(&init_mm, __pa(pmd_p) >> PAGE_SHIFT);
 		for (n = 0; n < ESPFIX_PUD_CLONES; n++)
@@ -180,7 +182,9 @@
 	pmd_p = pmd_offset(&pud, addr);
 	pmd = *pmd_p;
 	if (!pmd_present(pmd)) {
-		pte_p = (pte_t *)__get_free_page(PGALLOC_GFP);
+		struct page *page = alloc_pages_node(node, PGALLOC_GFP, 0);
+
+		pte_p = (pte_t *)page_address(page);
 		pmd = __pmd(__pa(pte_p) | (PGTABLE_PROT & ptemask));
 		paravirt_alloc_pte(&init_mm, __pa(pte_p) >> PAGE_SHIFT);
 		for (n = 0; n < ESPFIX_PMD_CLONES; n++)
@@ -188,7 +192,7 @@
 	}
 
 	pte_p = pte_offset_kernel(&pmd, addr);
-	stack_page = (void *)__get_free_page(GFP_KERNEL);
+	stack_page = page_address(alloc_pages_node(node, GFP_KERNEL, 0));
 	pte = __pte(__pa(stack_page) | (__PAGE_KERNEL_RO & ptemask));
 	for (n = 0; n < ESPFIX_PTE_CLONES; n++)
 		set_pte(&pte_p[n*PTE_STRIDE], pte);
@@ -199,7 +203,7 @@
 unlock_done:
 	mutex_unlock(&espfix_init_mutex);
 done:
-	this_cpu_write(espfix_stack, addr);
-	this_cpu_write(espfix_waddr, (unsigned long)stack_page
-		       + (addr & ~PAGE_MASK));
+	per_cpu(espfix_stack, cpu) = addr;
+	per_cpu(espfix_waddr, cpu) = (unsigned long)stack_page
+				      + (addr & ~PAGE_MASK);
 }
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index 3282679..1e173f6 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -4,6 +4,8 @@
 #include <asm/fpu/internal.h>
 #include <asm/tlbflush.h>
 
+#include <linux/sched.h>
+
 /*
  * Initialize the TS bit in CR0 according to the style of context-switches
  * we are using:
@@ -136,6 +138,43 @@
 unsigned int xstate_size;
 EXPORT_SYMBOL_GPL(xstate_size);
 
+/* Enforce that 'MEMBER' is the last field of 'TYPE': */
+#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \
+	BUILD_BUG_ON(sizeof(TYPE) != offsetofend(TYPE, MEMBER))
+
+/*
+ * We append the 'struct fpu' to the task_struct:
+ */
+static void __init fpu__init_task_struct_size(void)
+{
+	int task_size = sizeof(struct task_struct);
+
+	/*
+	 * Subtract off the static size of the register state.
+	 * It potentially has a bunch of padding.
+	 */
+	task_size -= sizeof(((struct task_struct *)0)->thread.fpu.state);
+
+	/*
+	 * Add back the dynamically-calculated register state
+	 * size.
+	 */
+	task_size += xstate_size;
+
+	/*
+	 * We dynamically size 'struct fpu', so we require that
+	 * it be at the end of 'thread_struct' and that
+	 * 'thread_struct' be at the end of 'task_struct'.  If
+	 * you hit a compile error here, check the structure to
+	 * see if something got added to the end.
+	 */
+	CHECK_MEMBER_AT_END_OF(struct fpu, state);
+	CHECK_MEMBER_AT_END_OF(struct thread_struct, fpu);
+	CHECK_MEMBER_AT_END_OF(struct task_struct, thread);
+
+	arch_task_struct_size = task_size;
+}
+
 /*
  * Set up the xstate_size based on the legacy FPU context size.
  *
@@ -287,6 +326,7 @@
 	fpu__init_system_generic();
 	fpu__init_system_xstate_size_legacy();
 	fpu__init_system_xstate();
+	fpu__init_task_struct_size();
 
 	fpu__init_system_ctx_switch();
 }
@@ -311,9 +351,15 @@
 
 	setup_clear_cpu_cap(X86_FEATURE_XSAVE);
 	setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
+	setup_clear_cpu_cap(X86_FEATURE_XSAVEC);
 	setup_clear_cpu_cap(X86_FEATURE_XSAVES);
 	setup_clear_cpu_cap(X86_FEATURE_AVX);
 	setup_clear_cpu_cap(X86_FEATURE_AVX2);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512F);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512PF);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512ER);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512CD);
+	setup_clear_cpu_cap(X86_FEATURE_MPX);
 
 	return 1;
 }
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 5a46681..f129a9a 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -161,11 +161,12 @@
 	/* Kill off the identity-map trampoline */
 	reset_early_page_tables();
 
-	kasan_map_early_shadow(early_level4_pgt);
-
-	/* clear bss before set_intr_gate with early_idt_handler */
 	clear_bss();
 
+	clear_page(init_level4_pgt);
+
+	kasan_early_init();
+
 	for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
 		set_intr_gate(i, early_idt_handler_array[i]);
 	load_idt((const struct desc_ptr *)&idt_descr);
@@ -177,12 +178,9 @@
 	 */
 	load_ucode_bsp();
 
-	clear_page(init_level4_pgt);
 	/* set init_level4_pgt kernel high mapping*/
 	init_level4_pgt[511] = early_level4_pgt[511];
 
-	kasan_map_early_shadow(init_level4_pgt);
-
 	x86_64_start_reservations(real_mode_data);
 }
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index e5c27f7..1d40ca8 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -516,38 +516,9 @@
 	/* This must match the first entry in level2_kernel_pgt */
 	.quad   0x0000000000000000
 
-#ifdef CONFIG_KASAN
-#define FILL(VAL, COUNT)				\
-	.rept (COUNT) ;					\
-	.quad	(VAL) ;					\
-	.endr
-
-NEXT_PAGE(kasan_zero_pte)
-	FILL(kasan_zero_page - __START_KERNEL_map + _KERNPG_TABLE, 512)
-NEXT_PAGE(kasan_zero_pmd)
-	FILL(kasan_zero_pte - __START_KERNEL_map + _KERNPG_TABLE, 512)
-NEXT_PAGE(kasan_zero_pud)
-	FILL(kasan_zero_pmd - __START_KERNEL_map + _KERNPG_TABLE, 512)
-
-#undef FILL
-#endif
-
-
 #include "../../x86/xen/xen-head.S"
 	
 	__PAGE_ALIGNED_BSS
 NEXT_PAGE(empty_zero_page)
 	.skip PAGE_SIZE
 
-#ifdef CONFIG_KASAN
-/*
- * This page used as early shadow. We don't use empty_zero_page
- * at early stages, stack instrumentation could write some garbage
- * to this page.
- * Latter we reuse it as zero shadow for large ranges of memory
- * that allowed to access, but not instrumented by kasan
- * (vmalloc/vmemmap ...).
- */
-NEXT_PAGE(kasan_zero_page)
-	.skip PAGE_SIZE
-#endif
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 88b36648..c7dfe1b 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -347,14 +347,22 @@
 			if (!desc)
 				continue;
 
+			/*
+			 * Protect against concurrent action removal,
+			 * affinity changes etc.
+			 */
+			raw_spin_lock(&desc->lock);
 			data = irq_desc_get_irq_data(desc);
 			cpumask_copy(&affinity_new, data->affinity);
 			cpumask_clear_cpu(this_cpu, &affinity_new);
 
 			/* Do not count inactive or per-cpu irqs. */
-			if (!irq_has_action(irq) || irqd_is_per_cpu(data))
+			if (!irq_has_action(irq) || irqd_is_per_cpu(data)) {
+				raw_spin_unlock(&desc->lock);
 				continue;
+			}
 
+			raw_spin_unlock(&desc->lock);
 			/*
 			 * A single irq may be mapped to multiple
 			 * cpu's vector_irq[] (for example IOAPIC cluster
@@ -385,6 +393,9 @@
 		 * vector. If the vector is marked in the used vectors
 		 * bitmap or an irq is assigned to it, we don't count
 		 * it as available.
+		 *
+		 * As this is an inaccurate snapshot anyway, we can do
+		 * this w/o holding vector_lock.
 		 */
 		for (vector = FIRST_EXTERNAL_VECTOR;
 		     vector < first_system_vector; vector++) {
@@ -486,6 +497,11 @@
 	 */
 	mdelay(1);
 
+	/*
+	 * We can walk the vector array of this cpu without holding
+	 * vector_lock because the cpu is already marked !online, so
+	 * nothing else will touch it.
+	 */
 	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
 		unsigned int irr;
 
@@ -497,9 +513,9 @@
 			irq = __this_cpu_read(vector_irq[vector]);
 
 			desc = irq_to_desc(irq);
+			raw_spin_lock(&desc->lock);
 			data = irq_desc_get_irq_data(desc);
 			chip = irq_data_get_irq_chip(data);
-			raw_spin_lock(&desc->lock);
 			if (chip->irq_retrigger) {
 				chip->irq_retrigger(data);
 				__this_cpu_write(vector_irq[vector], VECTOR_RETRIGGERED);
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index c37886d..2bcc052 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -12,6 +12,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/uaccess.h>
 
@@ -20,82 +21,82 @@
 #include <asm/mmu_context.h>
 #include <asm/syscalls.h>
 
-#ifdef CONFIG_SMP
+/* context.lock is held for us, so we don't need any locking. */
 static void flush_ldt(void *current_mm)
 {
-	if (current->active_mm == current_mm)
-		load_LDT(&current->active_mm->context);
+	mm_context_t *pc;
+
+	if (current->active_mm != current_mm)
+		return;
+
+	pc = &current->active_mm->context;
+	set_ldt(pc->ldt->entries, pc->ldt->size);
 }
-#endif
 
-static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
+/* The caller must call finalize_ldt_struct on the result. LDT starts zeroed. */
+static struct ldt_struct *alloc_ldt_struct(int size)
 {
-	void *oldldt, *newldt;
-	int oldsize;
+	struct ldt_struct *new_ldt;
+	int alloc_size;
 
-	if (mincount <= pc->size)
-		return 0;
-	oldsize = pc->size;
-	mincount = (mincount + (PAGE_SIZE / LDT_ENTRY_SIZE - 1)) &
-			(~(PAGE_SIZE / LDT_ENTRY_SIZE - 1));
-	if (mincount * LDT_ENTRY_SIZE > PAGE_SIZE)
-		newldt = vmalloc(mincount * LDT_ENTRY_SIZE);
+	if (size > LDT_ENTRIES)
+		return NULL;
+
+	new_ldt = kmalloc(sizeof(struct ldt_struct), GFP_KERNEL);
+	if (!new_ldt)
+		return NULL;
+
+	BUILD_BUG_ON(LDT_ENTRY_SIZE != sizeof(struct desc_struct));
+	alloc_size = size * LDT_ENTRY_SIZE;
+
+	/*
+	 * Xen is very picky: it requires a page-aligned LDT that has no
+	 * trailing nonzero bytes in any page that contains LDT descriptors.
+	 * Keep it simple: zero the whole allocation and never allocate less
+	 * than PAGE_SIZE.
+	 */
+	if (alloc_size > PAGE_SIZE)
+		new_ldt->entries = vzalloc(alloc_size);
 	else
-		newldt = (void *)__get_free_page(GFP_KERNEL);
+		new_ldt->entries = kzalloc(PAGE_SIZE, GFP_KERNEL);
 
-	if (!newldt)
-		return -ENOMEM;
-
-	if (oldsize)
-		memcpy(newldt, pc->ldt, oldsize * LDT_ENTRY_SIZE);
-	oldldt = pc->ldt;
-	memset(newldt + oldsize * LDT_ENTRY_SIZE, 0,
-	       (mincount - oldsize) * LDT_ENTRY_SIZE);
-
-	paravirt_alloc_ldt(newldt, mincount);
-
-#ifdef CONFIG_X86_64
-	/* CHECKME: Do we really need this ? */
-	wmb();
-#endif
-	pc->ldt = newldt;
-	wmb();
-	pc->size = mincount;
-	wmb();
-
-	if (reload) {
-#ifdef CONFIG_SMP
-		preempt_disable();
-		load_LDT(pc);
-		if (!cpumask_equal(mm_cpumask(current->mm),
-				   cpumask_of(smp_processor_id())))
-			smp_call_function(flush_ldt, current->mm, 1);
-		preempt_enable();
-#else
-		load_LDT(pc);
-#endif
+	if (!new_ldt->entries) {
+		kfree(new_ldt);
+		return NULL;
 	}
-	if (oldsize) {
-		paravirt_free_ldt(oldldt, oldsize);
-		if (oldsize * LDT_ENTRY_SIZE > PAGE_SIZE)
-			vfree(oldldt);
-		else
-			put_page(virt_to_page(oldldt));
-	}
-	return 0;
+
+	new_ldt->size = size;
+	return new_ldt;
 }
 
-static inline int copy_ldt(mm_context_t *new, mm_context_t *old)
+/* After calling this, the LDT is immutable. */
+static void finalize_ldt_struct(struct ldt_struct *ldt)
 {
-	int err = alloc_ldt(new, old->size, 0);
-	int i;
+	paravirt_alloc_ldt(ldt->entries, ldt->size);
+}
 
-	if (err < 0)
-		return err;
+/* context.lock is held */
+static void install_ldt(struct mm_struct *current_mm,
+			struct ldt_struct *ldt)
+{
+	/* Synchronizes with lockless_dereference in load_mm_ldt. */
+	smp_store_release(&current_mm->context.ldt, ldt);
 
-	for (i = 0; i < old->size; i++)
-		write_ldt_entry(new->ldt, i, old->ldt + i * LDT_ENTRY_SIZE);
-	return 0;
+	/* Activate the LDT for all CPUs using current_mm. */
+	on_each_cpu_mask(mm_cpumask(current_mm), flush_ldt, current_mm, true);
+}
+
+static void free_ldt_struct(struct ldt_struct *ldt)
+{
+	if (likely(!ldt))
+		return;
+
+	paravirt_free_ldt(ldt->entries, ldt->size);
+	if (ldt->size * LDT_ENTRY_SIZE > PAGE_SIZE)
+		vfree(ldt->entries);
+	else
+		kfree(ldt->entries);
+	kfree(ldt);
 }
 
 /*
@@ -104,17 +105,37 @@
  */
 int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
+	struct ldt_struct *new_ldt;
 	struct mm_struct *old_mm;
 	int retval = 0;
 
 	mutex_init(&mm->context.lock);
-	mm->context.size = 0;
 	old_mm = current->mm;
-	if (old_mm && old_mm->context.size > 0) {
-		mutex_lock(&old_mm->context.lock);
-		retval = copy_ldt(&mm->context, &old_mm->context);
-		mutex_unlock(&old_mm->context.lock);
+	if (!old_mm) {
+		mm->context.ldt = NULL;
+		return 0;
 	}
+
+	mutex_lock(&old_mm->context.lock);
+	if (!old_mm->context.ldt) {
+		mm->context.ldt = NULL;
+		goto out_unlock;
+	}
+
+	new_ldt = alloc_ldt_struct(old_mm->context.ldt->size);
+	if (!new_ldt) {
+		retval = -ENOMEM;
+		goto out_unlock;
+	}
+
+	memcpy(new_ldt->entries, old_mm->context.ldt->entries,
+	       new_ldt->size * LDT_ENTRY_SIZE);
+	finalize_ldt_struct(new_ldt);
+
+	mm->context.ldt = new_ldt;
+
+out_unlock:
+	mutex_unlock(&old_mm->context.lock);
 	return retval;
 }
 
@@ -125,53 +146,47 @@
  */
 void destroy_context(struct mm_struct *mm)
 {
-	if (mm->context.size) {
-#ifdef CONFIG_X86_32
-		/* CHECKME: Can this ever happen ? */
-		if (mm == current->active_mm)
-			clear_LDT();
-#endif
-		paravirt_free_ldt(mm->context.ldt, mm->context.size);
-		if (mm->context.size * LDT_ENTRY_SIZE > PAGE_SIZE)
-			vfree(mm->context.ldt);
-		else
-			put_page(virt_to_page(mm->context.ldt));
-		mm->context.size = 0;
-	}
+	free_ldt_struct(mm->context.ldt);
+	mm->context.ldt = NULL;
 }
 
 static int read_ldt(void __user *ptr, unsigned long bytecount)
 {
-	int err;
+	int retval;
 	unsigned long size;
 	struct mm_struct *mm = current->mm;
 
-	if (!mm->context.size)
-		return 0;
+	mutex_lock(&mm->context.lock);
+
+	if (!mm->context.ldt) {
+		retval = 0;
+		goto out_unlock;
+	}
+
 	if (bytecount > LDT_ENTRY_SIZE * LDT_ENTRIES)
 		bytecount = LDT_ENTRY_SIZE * LDT_ENTRIES;
 
-	mutex_lock(&mm->context.lock);
-	size = mm->context.size * LDT_ENTRY_SIZE;
+	size = mm->context.ldt->size * LDT_ENTRY_SIZE;
 	if (size > bytecount)
 		size = bytecount;
 
-	err = 0;
-	if (copy_to_user(ptr, mm->context.ldt, size))
-		err = -EFAULT;
-	mutex_unlock(&mm->context.lock);
-	if (err < 0)
-		goto error_return;
+	if (copy_to_user(ptr, mm->context.ldt->entries, size)) {
+		retval = -EFAULT;
+		goto out_unlock;
+	}
+
 	if (size != bytecount) {
-		/* zero-fill the rest */
-		if (clear_user(ptr + size, bytecount - size) != 0) {
-			err = -EFAULT;
-			goto error_return;
+		/* Zero-fill the rest and pretend we read bytecount bytes. */
+		if (clear_user(ptr + size, bytecount - size)) {
+			retval = -EFAULT;
+			goto out_unlock;
 		}
 	}
-	return bytecount;
-error_return:
-	return err;
+	retval = bytecount;
+
+out_unlock:
+	mutex_unlock(&mm->context.lock);
+	return retval;
 }
 
 static int read_default_ldt(void __user *ptr, unsigned long bytecount)
@@ -195,6 +210,8 @@
 	struct desc_struct ldt;
 	int error;
 	struct user_desc ldt_info;
+	int oldsize, newsize;
+	struct ldt_struct *new_ldt, *old_ldt;
 
 	error = -EINVAL;
 	if (bytecount != sizeof(ldt_info))
@@ -213,34 +230,39 @@
 			goto out;
 	}
 
-	mutex_lock(&mm->context.lock);
-	if (ldt_info.entry_number >= mm->context.size) {
-		error = alloc_ldt(&current->mm->context,
-				  ldt_info.entry_number + 1, 1);
-		if (error < 0)
-			goto out_unlock;
-	}
-
-	/* Allow LDTs to be cleared by the user. */
-	if (ldt_info.base_addr == 0 && ldt_info.limit == 0) {
-		if (oldmode || LDT_empty(&ldt_info)) {
-			memset(&ldt, 0, sizeof(ldt));
-			goto install;
+	if ((oldmode && !ldt_info.base_addr && !ldt_info.limit) ||
+	    LDT_empty(&ldt_info)) {
+		/* The user wants to clear the entry. */
+		memset(&ldt, 0, sizeof(ldt));
+	} else {
+		if (!IS_ENABLED(CONFIG_X86_16BIT) && !ldt_info.seg_32bit) {
+			error = -EINVAL;
+			goto out;
 		}
+
+		fill_ldt(&ldt, &ldt_info);
+		if (oldmode)
+			ldt.avl = 0;
 	}
 
-	if (!IS_ENABLED(CONFIG_X86_16BIT) && !ldt_info.seg_32bit) {
-		error = -EINVAL;
+	mutex_lock(&mm->context.lock);
+
+	old_ldt = mm->context.ldt;
+	oldsize = old_ldt ? old_ldt->size : 0;
+	newsize = max((int)(ldt_info.entry_number + 1), oldsize);
+
+	error = -ENOMEM;
+	new_ldt = alloc_ldt_struct(newsize);
+	if (!new_ldt)
 		goto out_unlock;
-	}
 
-	fill_ldt(&ldt, &ldt_info);
-	if (oldmode)
-		ldt.avl = 0;
+	if (old_ldt)
+		memcpy(new_ldt->entries, old_ldt->entries, oldsize * LDT_ENTRY_SIZE);
+	new_ldt->entries[ldt_info.entry_number] = ldt;
+	finalize_ldt_struct(new_ldt);
 
-	/* Install the new entry ...  */
-install:
-	write_ldt_entry(mm->context.ldt, ldt_info.entry_number, &ldt);
+	install_ldt(mm, new_ldt);
+	free_ldt_struct(old_ldt);
 	error = 0;
 
 out_unlock:
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index c3e985d..d05bd2e 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -408,15 +408,15 @@
 NOKPROBE_SYMBOL(default_do_nmi);
 
 /*
- * NMIs can hit breakpoints which will cause it to lose its
- * NMI context with the CPU when the breakpoint does an iret.
- */
-#ifdef CONFIG_X86_32
-/*
- * For i386, NMIs use the same stack as the kernel, and we can
- * add a workaround to the iret problem in C (preventing nested
- * NMIs if an NMI takes a trap). Simply have 3 states the NMI
- * can be in:
+ * NMIs can page fault or hit breakpoints which will cause it to lose
+ * its NMI context with the CPU when the breakpoint or page fault does an IRET.
+ *
+ * As a result, NMIs can nest if NMIs get unmasked due an IRET during
+ * NMI processing.  On x86_64, the asm glue protects us from nested NMIs
+ * if the outer NMI came from kernel mode, but we can still nest if the
+ * outer NMI came from user mode.
+ *
+ * To handle these nested NMIs, we have three states:
  *
  *  1) not running
  *  2) executing
@@ -430,15 +430,14 @@
  * (Note, the latch is binary, thus multiple NMIs triggering,
  *  when one is running, are ignored. Only one NMI is restarted.)
  *
- * If an NMI hits a breakpoint that executes an iret, another
- * NMI can preempt it. We do not want to allow this new NMI
- * to run, but we want to execute it when the first one finishes.
- * We set the state to "latched", and the exit of the first NMI will
- * perform a dec_return, if the result is zero (NOT_RUNNING), then
- * it will simply exit the NMI handler. If not, the dec_return
- * would have set the state to NMI_EXECUTING (what we want it to
- * be when we are running). In this case, we simply jump back
- * to rerun the NMI handler again, and restart the 'latched' NMI.
+ * If an NMI executes an iret, another NMI can preempt it. We do not
+ * want to allow this new NMI to run, but we want to execute it when the
+ * first one finishes.  We set the state to "latched", and the exit of
+ * the first NMI will perform a dec_return, if the result is zero
+ * (NOT_RUNNING), then it will simply exit the NMI handler. If not, the
+ * dec_return would have set the state to NMI_EXECUTING (what we want it
+ * to be when we are running). In this case, we simply jump back to
+ * rerun the NMI handler again, and restart the 'latched' NMI.
  *
  * No trap (breakpoint or page fault) should be hit before nmi_restart,
  * thus there is no race between the first check of state for NOT_RUNNING
@@ -461,49 +460,36 @@
 static DEFINE_PER_CPU(enum nmi_states, nmi_state);
 static DEFINE_PER_CPU(unsigned long, nmi_cr2);
 
-#define nmi_nesting_preprocess(regs)					\
-	do {								\
-		if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) {	\
-			this_cpu_write(nmi_state, NMI_LATCHED);		\
-			return;						\
-		}							\
-		this_cpu_write(nmi_state, NMI_EXECUTING);		\
-		this_cpu_write(nmi_cr2, read_cr2());			\
-	} while (0);							\
-	nmi_restart:
-
-#define nmi_nesting_postprocess()					\
-	do {								\
-		if (unlikely(this_cpu_read(nmi_cr2) != read_cr2()))	\
-			write_cr2(this_cpu_read(nmi_cr2));		\
-		if (this_cpu_dec_return(nmi_state))			\
-			goto nmi_restart;				\
-	} while (0)
-#else /* x86_64 */
+#ifdef CONFIG_X86_64
 /*
- * In x86_64 things are a bit more difficult. This has the same problem
- * where an NMI hitting a breakpoint that calls iret will remove the
- * NMI context, allowing a nested NMI to enter. What makes this more
- * difficult is that both NMIs and breakpoints have their own stack.
- * When a new NMI or breakpoint is executed, the stack is set to a fixed
- * point. If an NMI is nested, it will have its stack set at that same
- * fixed address that the first NMI had, and will start corrupting the
- * stack. This is handled in entry_64.S, but the same problem exists with
- * the breakpoint stack.
+ * In x86_64, we need to handle breakpoint -> NMI -> breakpoint.  Without
+ * some care, the inner breakpoint will clobber the outer breakpoint's
+ * stack.
  *
- * If a breakpoint is being processed, and the debug stack is being used,
- * if an NMI comes in and also hits a breakpoint, the stack pointer
- * will be set to the same fixed address as the breakpoint that was
- * interrupted, causing that stack to be corrupted. To handle this case,
- * check if the stack that was interrupted is the debug stack, and if
- * so, change the IDT so that new breakpoints will use the current stack
- * and not switch to the fixed address. On return of the NMI, switch back
- * to the original IDT.
+ * If a breakpoint is being processed, and the debug stack is being
+ * used, if an NMI comes in and also hits a breakpoint, the stack
+ * pointer will be set to the same fixed address as the breakpoint that
+ * was interrupted, causing that stack to be corrupted. To handle this
+ * case, check if the stack that was interrupted is the debug stack, and
+ * if so, change the IDT so that new breakpoints will use the current
+ * stack and not switch to the fixed address. On return of the NMI,
+ * switch back to the original IDT.
  */
 static DEFINE_PER_CPU(int, update_debug_stack);
+#endif
 
-static inline void nmi_nesting_preprocess(struct pt_regs *regs)
+dotraplinkage notrace void
+do_nmi(struct pt_regs *regs, long error_code)
 {
+	if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) {
+		this_cpu_write(nmi_state, NMI_LATCHED);
+		return;
+	}
+	this_cpu_write(nmi_state, NMI_EXECUTING);
+	this_cpu_write(nmi_cr2, read_cr2());
+nmi_restart:
+
+#ifdef CONFIG_X86_64
 	/*
 	 * If we interrupted a breakpoint, it is possible that
 	 * the nmi handler will have breakpoints too. We need to
@@ -514,22 +500,8 @@
 		debug_stack_set_zero();
 		this_cpu_write(update_debug_stack, 1);
 	}
-}
-
-static inline void nmi_nesting_postprocess(void)
-{
-	if (unlikely(this_cpu_read(update_debug_stack))) {
-		debug_stack_reset();
-		this_cpu_write(update_debug_stack, 0);
-	}
-}
 #endif
 
-dotraplinkage notrace void
-do_nmi(struct pt_regs *regs, long error_code)
-{
-	nmi_nesting_preprocess(regs);
-
 	nmi_enter();
 
 	inc_irq_stat(__nmi_count);
@@ -539,8 +511,17 @@
 
 	nmi_exit();
 
-	/* On i386, may loop back to preprocess */
-	nmi_nesting_postprocess();
+#ifdef CONFIG_X86_64
+	if (unlikely(this_cpu_read(update_debug_stack))) {
+		debug_stack_reset();
+		this_cpu_write(update_debug_stack, 0);
+	}
+#endif
+
+	if (unlikely(this_cpu_read(nmi_cr2) != read_cr2()))
+		write_cr2(this_cpu_read(nmi_cr2));
+	if (this_cpu_dec_return(nmi_state))
+		goto nmi_restart;
 }
 NOKPROBE_SYMBOL(do_nmi);
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 9cad694..397688b 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -81,7 +81,7 @@
  */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-	*dst = *src;
+	memcpy(dst, src, arch_task_struct_size);
 
 	return fpu__copy(&dst->thread.fpu, &src->thread.fpu);
 }
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 71d7849..f6b9163 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -121,11 +121,11 @@
 void release_thread(struct task_struct *dead_task)
 {
 	if (dead_task->mm) {
-		if (dead_task->mm->context.size) {
+		if (dead_task->mm->context.ldt) {
 			pr_warn("WARNING: dead process %s still has LDT? <%p/%d>\n",
 				dead_task->comm,
 				dead_task->mm->context.ldt,
-				dead_task->mm->context.size);
+				dead_task->mm->context.ldt->size);
 			BUG();
 		}
 	}
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 8add66b..b1f3ed9c 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -171,11 +171,6 @@
 	apic_ap_setup();
 
 	/*
-	 * Need to setup vector mappings before we enable interrupts.
-	 */
-	setup_vector_irq(smp_processor_id());
-
-	/*
 	 * Save our processor parameters. Note: this information
 	 * is needed for clock calibration.
 	 */
@@ -239,18 +234,13 @@
 	check_tsc_sync_target();
 
 	/*
-	 * Enable the espfix hack for this CPU
-	 */
-#ifdef CONFIG_X86_ESPFIX64
-	init_espfix_ap();
-#endif
-
-	/*
-	 * We need to hold vector_lock so there the set of online cpus
-	 * does not change while we are assigning vectors to cpus.  Holding
-	 * this lock ensures we don't half assign or remove an irq from a cpu.
+	 * Lock vector_lock and initialize the vectors on this cpu
+	 * before setting the cpu online. We must set it online with
+	 * vector_lock held to prevent a concurrent setup/teardown
+	 * from seeing a half valid vector space.
 	 */
 	lock_vector_lock();
+	setup_vector_irq(smp_processor_id());
 	set_cpu_online(smp_processor_id(), true);
 	unlock_vector_lock();
 	cpu_set_state_online(smp_processor_id());
@@ -854,6 +844,13 @@
 	initial_code = (unsigned long)start_secondary;
 	stack_start  = idle->thread.sp;
 
+	/*
+	 * Enable the espfix hack for this CPU
+	*/
+#ifdef CONFIG_X86_ESPFIX64
+	init_espfix_ap(cpu);
+#endif
+
 	/* So we see what's up */
 	announce_cpu(cpu, apicid);
 
@@ -995,8 +992,17 @@
 
 	common_cpu_up(cpu, tidle);
 
+	/*
+	 * We have to walk the irq descriptors to setup the vector
+	 * space for the cpu which comes online.  Prevent irq
+	 * alloc/free across the bringup.
+	 */
+	irq_lock_sparse();
+
 	err = do_boot_cpu(apicid, cpu, tidle);
+
 	if (err) {
+		irq_unlock_sparse();
 		pr_err("do_boot_cpu failed(%d) to wakeup CPU#%u\n", err, cpu);
 		return -EIO;
 	}
@@ -1014,6 +1020,8 @@
 		touch_nmi_watchdog();
 	}
 
+	irq_unlock_sparse();
+
 	return 0;
 }
 
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 9b4d51d..6273324 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -5,6 +5,7 @@
 #include <linux/mm.h>
 #include <linux/ptrace.h>
 #include <asm/desc.h>
+#include <asm/mmu_context.h>
 
 unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs)
 {
@@ -30,10 +31,11 @@
 		seg &= ~7UL;
 
 		mutex_lock(&child->mm->context.lock);
-		if (unlikely((seg >> 3) >= child->mm->context.size))
+		if (unlikely(!child->mm->context.ldt ||
+			     (seg >> 3) >= child->mm->context.ldt->size))
 			addr = -1L; /* bogus selector, access would fault */
 		else {
-			desc = child->mm->context.ldt + seg;
+			desc = &child->mm->context.ldt->entries[seg];
 			base = get_desc_base(desc);
 
 			/* 16-bit code segment? */
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 5054497..7437b41 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -598,10 +598,19 @@
 			if (!pit_expect_msb(0xff-i, &delta, &d2))
 				break;
 
+			delta -= tsc;
+
+			/*
+			 * Extrapolate the error and fail fast if the error will
+			 * never be below 500 ppm.
+			 */
+			if (i == 1 &&
+			    d1 + d2 >= (delta * MAX_QUICK_PIT_ITERATIONS) >> 11)
+				return 0;
+
 			/*
 			 * Iterate until the error is less than 500 ppm
 			 */
-			delta -= tsc;
 			if (d1+d2 >= delta >> 11)
 				continue;
 
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 64dd467..2fbea25 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -98,6 +98,8 @@
 		best->ebx = xstate_required_size(vcpu->arch.xcr0, true);
 
 	vcpu->arch.eager_fpu = use_eager_fpu() || guest_cpuid_has_mpx(vcpu);
+	if (vcpu->arch.eager_fpu)
+		kvm_x86_ops->fpu_activate(vcpu);
 
 	/*
 	 * The existing code assumes virtual address is 48-bit in the canonical
diff --git a/arch/x86/kvm/iommu.c b/arch/x86/kvm/iommu.c
index 7dbced3..5c520eb 100644
--- a/arch/x86/kvm/iommu.c
+++ b/arch/x86/kvm/iommu.c
@@ -200,6 +200,7 @@
 			goto out_unmap;
 	}
 
+	kvm_arch_start_assignment(kvm);
 	pci_set_dev_assigned(pdev);
 
 	dev_info(&pdev->dev, "kvm assign device\n");
@@ -224,6 +225,7 @@
 	iommu_detach_device(domain, &pdev->dev);
 
 	pci_clear_dev_assigned(pdev);
+	kvm_arch_end_assignment(kvm);
 
 	dev_info(&pdev->dev, "kvm deassign device\n");
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 954e98a..2a5ca97 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1595,7 +1595,7 @@
 	for (i = 0; i < APIC_LVT_NUM; i++)
 		apic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED);
 	apic_update_lvtt(apic);
-	if (!(vcpu->kvm->arch.disabled_quirks & KVM_QUIRK_LINT0_REENABLED))
+	if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_LINT0_REENABLED))
 		apic_set_reg(apic, APIC_LVT0,
 			     SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT));
 	apic_manage_nmi_watchdog(apic, kvm_apic_get_reg(apic, APIC_LVT0));
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index f807496..4417146 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2479,6 +2479,14 @@
 	return 0;
 }
 
+static bool kvm_is_mmio_pfn(pfn_t pfn)
+{
+	if (pfn_valid(pfn))
+		return !is_zero_pfn(pfn) && PageReserved(pfn_to_page(pfn));
+
+	return true;
+}
+
 static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		    unsigned pte_access, int level,
 		    gfn_t gfn, pfn_t pfn, bool speculative,
@@ -2506,7 +2514,7 @@
 		spte |= PT_PAGE_SIZE_MASK;
 	if (tdp_enabled)
 		spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
-			kvm_is_reserved_pfn(pfn));
+			kvm_is_mmio_pfn(pfn));
 
 	if (host_writable)
 		spte |= SPTE_HOST_WRITEABLE;
diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c
index de1d2d8..dc0a84a 100644
--- a/arch/x86/kvm/mtrr.c
+++ b/arch/x86/kvm/mtrr.c
@@ -120,6 +120,16 @@
 	return mtrr_state->deftype & IA32_MTRR_DEF_TYPE_TYPE_MASK;
 }
 
+static u8 mtrr_disabled_type(void)
+{
+	/*
+	 * Intel SDM 11.11.2.2: all MTRRs are disabled when
+	 * IA32_MTRR_DEF_TYPE.E bit is cleared, and the UC
+	 * memory type is applied to all of physical memory.
+	 */
+	return MTRR_TYPE_UNCACHABLE;
+}
+
 /*
 * Three terms are used in the following code:
 * - segment, it indicates the address segments covered by fixed MTRRs.
@@ -434,6 +444,8 @@
 
 	/* output fields. */
 	int mem_type;
+	/* mtrr is completely disabled? */
+	bool mtrr_disabled;
 	/* [start, end) is not fully covered in MTRRs? */
 	bool partial_map;
 
@@ -549,7 +561,7 @@
 static void mtrr_lookup_start(struct mtrr_iter *iter)
 {
 	if (!mtrr_is_enabled(iter->mtrr_state)) {
-		iter->partial_map = true;
+		iter->mtrr_disabled = true;
 		return;
 	}
 
@@ -563,6 +575,7 @@
 	iter->mtrr_state = mtrr_state;
 	iter->start = start;
 	iter->end = end;
+	iter->mtrr_disabled = false;
 	iter->partial_map = false;
 	iter->fixed = false;
 	iter->range = NULL;
@@ -656,15 +669,19 @@
 		return MTRR_TYPE_WRBACK;
 	}
 
-	/* It is not covered by MTRRs. */
-	if (iter.partial_map) {
-		/*
-		 * We just check one page, partially covered by MTRRs is
-		 * impossible.
-		 */
-		WARN_ON(type != -1);
-		type = mtrr_default_type(mtrr_state);
-	}
+	if (iter.mtrr_disabled)
+		return mtrr_disabled_type();
+
+	/*
+	 * We just check one page, partially covered by MTRRs is
+	 * impossible.
+	 */
+	WARN_ON(iter.partial_map);
+
+	/* not contained in any MTRRs. */
+	if (type == -1)
+		return mtrr_default_type(mtrr_state);
+
 	return type;
 }
 EXPORT_SYMBOL_GPL(kvm_mtrr_get_guest_memory_type);
@@ -689,6 +706,9 @@
 			return false;
 	}
 
+	if (iter.mtrr_disabled)
+		return true;
+
 	if (!iter.partial_map)
 		return true;
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 602b974..8e0c084 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -865,6 +865,64 @@
 	set_msr_interception(msrpm, MSR_IA32_LASTINTTOIP, 0, 0);
 }
 
+#define MTRR_TYPE_UC_MINUS	7
+#define MTRR2PROTVAL_INVALID 0xff
+
+static u8 mtrr2protval[8];
+
+static u8 fallback_mtrr_type(int mtrr)
+{
+	/*
+	 * WT and WP aren't always available in the host PAT.  Treat
+	 * them as UC and UC- respectively.  Everything else should be
+	 * there.
+	 */
+	switch (mtrr)
+	{
+	case MTRR_TYPE_WRTHROUGH:
+		return MTRR_TYPE_UNCACHABLE;
+	case MTRR_TYPE_WRPROT:
+		return MTRR_TYPE_UC_MINUS;
+	default:
+		BUG();
+	}
+}
+
+static void build_mtrr2protval(void)
+{
+	int i;
+	u64 pat;
+
+	for (i = 0; i < 8; i++)
+		mtrr2protval[i] = MTRR2PROTVAL_INVALID;
+
+	/* Ignore the invalid MTRR types.  */
+	mtrr2protval[2] = 0;
+	mtrr2protval[3] = 0;
+
+	/*
+	 * Use host PAT value to figure out the mapping from guest MTRR
+	 * values to nested page table PAT/PCD/PWT values.  We do not
+	 * want to change the host PAT value every time we enter the
+	 * guest.
+	 */
+	rdmsrl(MSR_IA32_CR_PAT, pat);
+	for (i = 0; i < 8; i++) {
+		u8 mtrr = pat >> (8 * i);
+
+		if (mtrr2protval[mtrr] == MTRR2PROTVAL_INVALID)
+			mtrr2protval[mtrr] = __cm_idx2pte(i);
+	}
+
+	for (i = 0; i < 8; i++) {
+		if (mtrr2protval[i] == MTRR2PROTVAL_INVALID) {
+			u8 fallback = fallback_mtrr_type(i);
+			mtrr2protval[i] = mtrr2protval[fallback];
+			BUG_ON(mtrr2protval[i] == MTRR2PROTVAL_INVALID);
+		}
+	}
+}
+
 static __init int svm_hardware_setup(void)
 {
 	int cpu;
@@ -931,6 +989,7 @@
 	} else
 		kvm_disable_tdp();
 
+	build_mtrr2protval();
 	return 0;
 
 err:
@@ -1085,6 +1144,39 @@
 	return target_tsc - tsc;
 }
 
+static void svm_set_guest_pat(struct vcpu_svm *svm, u64 *g_pat)
+{
+	struct kvm_vcpu *vcpu = &svm->vcpu;
+
+	/* Unlike Intel, AMD takes the guest's CR0.CD into account.
+	 *
+	 * AMD does not have IPAT.  To emulate it for the case of guests
+	 * with no assigned devices, just set everything to WB.  If guests
+	 * have assigned devices, however, we cannot force WB for RAM
+	 * pages only, so use the guest PAT directly.
+	 */
+	if (!kvm_arch_has_assigned_device(vcpu->kvm))
+		*g_pat = 0x0606060606060606;
+	else
+		*g_pat = vcpu->arch.pat;
+}
+
+static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
+{
+	u8 mtrr;
+
+	/*
+	 * 1. MMIO: trust guest MTRR, so same as item 3.
+	 * 2. No passthrough: always map as WB, and force guest PAT to WB as well
+	 * 3. Passthrough: can't guarantee the result, try to trust guest.
+	 */
+	if (!is_mmio && !kvm_arch_has_assigned_device(vcpu->kvm))
+		return 0;
+
+	mtrr = kvm_mtrr_get_guest_memory_type(vcpu, gfn);
+	return mtrr2protval[mtrr];
+}
+
 static void init_vmcb(struct vcpu_svm *svm, bool init_event)
 {
 	struct vmcb_control_area *control = &svm->vmcb->control;
@@ -1180,6 +1272,7 @@
 		clr_cr_intercept(svm, INTERCEPT_CR3_READ);
 		clr_cr_intercept(svm, INTERCEPT_CR3_WRITE);
 		save->g_pat = svm->vcpu.arch.pat;
+		svm_set_guest_pat(svm, &save->g_pat);
 		save->cr3 = 0;
 		save->cr4 = 0;
 	}
@@ -1579,7 +1672,7 @@
 	 * does not do it - this results in some delay at
 	 * reboot
 	 */
-	if (!(vcpu->kvm->arch.disabled_quirks & KVM_QUIRK_CD_NW_CLEARED))
+	if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED))
 		cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
 	svm->vmcb->save.cr0 = cr0;
 	mark_dirty(svm->vmcb, VMCB_CR);
@@ -3254,6 +3347,16 @@
 	case MSR_VM_IGNNE:
 		vcpu_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
 		break;
+	case MSR_IA32_CR_PAT:
+		if (npt_enabled) {
+			if (!kvm_mtrr_valid(vcpu, MSR_IA32_CR_PAT, data))
+				return 1;
+			vcpu->arch.pat = data;
+			svm_set_guest_pat(svm, &svm->vmcb->save.g_pat);
+			mark_dirty(svm->vmcb, VMCB_NPT);
+			break;
+		}
+		/* fall through */
 	default:
 		return kvm_set_msr_common(vcpu, msr);
 	}
@@ -4088,11 +4191,6 @@
 	return true;
 }
 
-static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
-{
-	return 0;
-}
-
 static void svm_cpuid_update(struct kvm_vcpu *vcpu)
 {
 }
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e856dd5..83b7b5c 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -8632,22 +8632,17 @@
 	u64 ipat = 0;
 
 	/* For VT-d and EPT combination
-	 * 1. MMIO: always map as UC
+	 * 1. MMIO: guest may want to apply WC, trust it.
 	 * 2. EPT with VT-d:
 	 *   a. VT-d without snooping control feature: can't guarantee the
-	 *	result, try to trust guest.
+	 *	result, try to trust guest.  So the same as item 1.
 	 *   b. VT-d with snooping control feature: snooping control feature of
 	 *	VT-d engine can guarantee the cache correctness. Just set it
 	 *	to WB to keep consistent with host. So the same as item 3.
 	 * 3. EPT without VT-d: always map as WB and set IPAT=1 to keep
 	 *    consistent with host MTRR
 	 */
-	if (is_mmio) {
-		cache = MTRR_TYPE_UNCACHABLE;
-		goto exit;
-	}
-
-	if (!kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
+	if (!is_mmio && !kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
 		ipat = VMX_EPT_IPAT_BIT;
 		cache = MTRR_TYPE_WRBACK;
 		goto exit;
@@ -8655,7 +8650,10 @@
 
 	if (kvm_read_cr0(vcpu) & X86_CR0_CD) {
 		ipat = VMX_EPT_IPAT_BIT;
-		cache = MTRR_TYPE_UNCACHABLE;
+		if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED))
+			cache = MTRR_TYPE_WRBACK;
+		else
+			cache = MTRR_TYPE_UNCACHABLE;
 		goto exit;
 	}
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index bbaf44e..5ef2560 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3157,8 +3157,7 @@
 			cpuid_count(XSTATE_CPUID, index,
 				    &size, &offset, &ecx, &edx);
 			memcpy(dest, src + offset, size);
-		} else
-			WARN_ON_ONCE(1);
+		}
 
 		valid -= feature;
 	}
@@ -7315,11 +7314,6 @@
 
 	vcpu = kvm_x86_ops->vcpu_create(kvm, id);
 
-	/*
-	 * Activate fpu unconditionally in case the guest needs eager FPU.  It will be
-	 * deactivated soon if it doesn't.
-	 */
-	kvm_x86_ops->fpu_activate(vcpu);
 	return vcpu;
 }
 
@@ -8218,6 +8212,24 @@
 			kvm_x86_ops->interrupt_allowed(vcpu);
 }
 
+void kvm_arch_start_assignment(struct kvm *kvm)
+{
+	atomic_inc(&kvm->arch.assigned_device_count);
+}
+EXPORT_SYMBOL_GPL(kvm_arch_start_assignment);
+
+void kvm_arch_end_assignment(struct kvm *kvm)
+{
+	atomic_dec(&kvm->arch.assigned_device_count);
+}
+EXPORT_SYMBOL_GPL(kvm_arch_end_assignment);
+
+bool kvm_arch_has_assigned_device(struct kvm *kvm)
+{
+	return atomic_read(&kvm->arch.assigned_device_count);
+}
+EXPORT_SYMBOL_GPL(kvm_arch_has_assigned_device);
+
 void kvm_arch_register_noncoherent_dma(struct kvm *kvm)
 {
 	atomic_inc(&kvm->arch.noncoherent_dma_count);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index edc8cdc..0ca2f3e 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -147,6 +147,11 @@
 	return kvm_register_write(vcpu, reg, val);
 }
 
+static inline bool kvm_check_has_quirk(struct kvm *kvm, u64 quirk)
+{
+	return !(kvm->arch.disabled_quirks & quirk);
+}
+
 void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
 void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
 void kvm_set_pending_timer(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index ddf9ecb..e342586 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -20,7 +20,7 @@
 	unsigned long ret;
 
 	if (__range_not_ok(from, n, TASK_SIZE))
-		return 0;
+		return n;
 
 	/*
 	 * Even though this function is typically called from NMI/IRQ context
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index cc5ccc4..b9c78f3 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -63,8 +63,6 @@
 		    !PageReserved(pfn_to_page(start_pfn + i)))
 			return 1;
 
-	WARN_ONCE(1, "ioremap on RAM pfn 0x%lx\n", start_pfn);
-
 	return 0;
 }
 
@@ -94,7 +92,6 @@
 	pgprot_t prot;
 	int retval;
 	void __iomem *ret_addr;
-	int ram_region;
 
 	/* Don't allow wraparound or zero size */
 	last_addr = phys_addr + size - 1;
@@ -117,23 +114,15 @@
 	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
 	 */
-	/* First check if whole region can be identified as RAM or not */
-	ram_region = region_is_ram(phys_addr, size);
-	if (ram_region > 0) {
-		WARN_ONCE(1, "ioremap on RAM at 0x%lx - 0x%lx\n",
-				(unsigned long int)phys_addr,
-				(unsigned long int)last_addr);
+	pfn      = phys_addr >> PAGE_SHIFT;
+	last_pfn = last_addr >> PAGE_SHIFT;
+	if (walk_system_ram_range(pfn, last_pfn - pfn + 1, NULL,
+					  __ioremap_check_ram) == 1) {
+		WARN_ONCE(1, "ioremap on RAM at %pa - %pa\n",
+			  &phys_addr, &last_addr);
 		return NULL;
 	}
 
-	/* If could not be identified(-1), check page by page */
-	if (ram_region < 0) {
-		pfn      = phys_addr >> PAGE_SHIFT;
-		last_pfn = last_addr >> PAGE_SHIFT;
-		if (walk_system_ram_range(pfn, last_pfn - pfn + 1, NULL,
-					  __ioremap_check_ram) == 1)
-			return NULL;
-	}
 	/*
 	 * Mappings have to be page-aligned
 	 */
diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
index 4860906..e1840f3 100644
--- a/arch/x86/mm/kasan_init_64.c
+++ b/arch/x86/mm/kasan_init_64.c
@@ -1,3 +1,4 @@
+#define pr_fmt(fmt) "kasan: " fmt
 #include <linux/bootmem.h>
 #include <linux/kasan.h>
 #include <linux/kdebug.h>
@@ -11,7 +12,19 @@
 extern pgd_t early_level4_pgt[PTRS_PER_PGD];
 extern struct range pfn_mapped[E820_X_MAX];
 
-extern unsigned char kasan_zero_page[PAGE_SIZE];
+static pud_t kasan_zero_pud[PTRS_PER_PUD] __page_aligned_bss;
+static pmd_t kasan_zero_pmd[PTRS_PER_PMD] __page_aligned_bss;
+static pte_t kasan_zero_pte[PTRS_PER_PTE] __page_aligned_bss;
+
+/*
+ * This page used as early shadow. We don't use empty_zero_page
+ * at early stages, stack instrumentation could write some garbage
+ * to this page.
+ * Latter we reuse it as zero shadow for large ranges of memory
+ * that allowed to access, but not instrumented by kasan
+ * (vmalloc/vmemmap ...).
+ */
+static unsigned char kasan_zero_page[PAGE_SIZE] __page_aligned_bss;
 
 static int __init map_range(struct range *range)
 {
@@ -36,7 +49,7 @@
 		pgd_clear(pgd_offset_k(start));
 }
 
-void __init kasan_map_early_shadow(pgd_t *pgd)
+static void __init kasan_map_early_shadow(pgd_t *pgd)
 {
 	int i;
 	unsigned long start = KASAN_SHADOW_START;
@@ -73,7 +86,7 @@
 	while (IS_ALIGNED(addr, PMD_SIZE) && addr + PMD_SIZE <= end) {
 		WARN_ON(!pmd_none(*pmd));
 		set_pmd(pmd, __pmd(__pa_nodebug(kasan_zero_pte)
-					| __PAGE_KERNEL_RO));
+					| _KERNPG_TABLE));
 		addr += PMD_SIZE;
 		pmd = pmd_offset(pud, addr);
 	}
@@ -99,7 +112,7 @@
 	while (IS_ALIGNED(addr, PUD_SIZE) && addr + PUD_SIZE <= end) {
 		WARN_ON(!pud_none(*pud));
 		set_pud(pud, __pud(__pa_nodebug(kasan_zero_pmd)
-					| __PAGE_KERNEL_RO));
+					| _KERNPG_TABLE));
 		addr += PUD_SIZE;
 		pud = pud_offset(pgd, addr);
 	}
@@ -124,7 +137,7 @@
 	while (IS_ALIGNED(addr, PGDIR_SIZE) && addr + PGDIR_SIZE <= end) {
 		WARN_ON(!pgd_none(*pgd));
 		set_pgd(pgd, __pgd(__pa_nodebug(kasan_zero_pud)
-					| __PAGE_KERNEL_RO));
+					| _KERNPG_TABLE));
 		addr += PGDIR_SIZE;
 		pgd = pgd_offset_k(addr);
 	}
@@ -166,6 +179,26 @@
 };
 #endif
 
+void __init kasan_early_init(void)
+{
+	int i;
+	pteval_t pte_val = __pa_nodebug(kasan_zero_page) | __PAGE_KERNEL;
+	pmdval_t pmd_val = __pa_nodebug(kasan_zero_pte) | _KERNPG_TABLE;
+	pudval_t pud_val = __pa_nodebug(kasan_zero_pmd) | _KERNPG_TABLE;
+
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		kasan_zero_pte[i] = __pte(pte_val);
+
+	for (i = 0; i < PTRS_PER_PMD; i++)
+		kasan_zero_pmd[i] = __pmd(pmd_val);
+
+	for (i = 0; i < PTRS_PER_PUD; i++)
+		kasan_zero_pud[i] = __pud(pud_val);
+
+	kasan_map_early_shadow(early_level4_pgt);
+	kasan_map_early_shadow(init_level4_pgt);
+}
+
 void __init kasan_init(void)
 {
 	int i;
@@ -176,6 +209,7 @@
 
 	memcpy(early_level4_pgt, init_level4_pgt, sizeof(early_level4_pgt));
 	load_cr3(early_level4_pgt);
+	__flush_tlb_all();
 
 	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
 
@@ -202,5 +236,8 @@
 	memset(kasan_zero_page, 0, PAGE_SIZE);
 
 	load_cr3(init_level4_pgt);
+	__flush_tlb_all();
 	init_task.kasan_depth = 0;
+
+	pr_info("Kernel address sanitizer initialized\n");
 }
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 9d518d6..844b06d 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -126,3 +126,10 @@
 		mm->get_unmapped_area = arch_get_unmapped_area_topdown;
 	}
 }
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_MPX)
+		return "[mpx]";
+	return NULL;
+}
diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c
index 7a657f5..db1b0bc 100644
--- a/arch/x86/mm/mpx.c
+++ b/arch/x86/mm/mpx.c
@@ -20,20 +20,6 @@
 #define CREATE_TRACE_POINTS
 #include <asm/trace/mpx.h>
 
-static const char *mpx_mapping_name(struct vm_area_struct *vma)
-{
-	return "[mpx]";
-}
-
-static struct vm_operations_struct mpx_vma_ops = {
-	.name = mpx_mapping_name,
-};
-
-static int is_mpx_vma(struct vm_area_struct *vma)
-{
-	return (vma->vm_ops == &mpx_vma_ops);
-}
-
 static inline unsigned long mpx_bd_size_bytes(struct mm_struct *mm)
 {
 	if (is_64bit_mm(mm))
@@ -53,9 +39,6 @@
 /*
  * This is really a simplified "vm_mmap". it only handles MPX
  * bounds tables (the bounds directory is user-allocated).
- *
- * Later on, we use the vma->vm_ops to uniquely identify these
- * VMAs.
  */
 static unsigned long mpx_mmap(unsigned long len)
 {
@@ -101,7 +84,6 @@
 		ret = -ENOMEM;
 		goto out;
 	}
-	vma->vm_ops = &mpx_vma_ops;
 
 	if (vm_flags & VM_LOCKED) {
 		up_write(&mm->mmap_sem);
@@ -812,7 +794,7 @@
 		 * so stop immediately and return an error.  This
 		 * probably results in a SIGSEGV.
 		 */
-		if (!is_mpx_vma(vma))
+		if (!(vma->vm_flags & VM_MPX))
 			return -EINVAL;
 
 		len = min(vma->vm_end, end) - addr;
@@ -945,9 +927,9 @@
 	 * lots of tables even though we have no actual table
 	 * entries in use.
 	 */
-	while (next && is_mpx_vma(next))
+	while (next && (next->vm_flags & VM_MPX))
 		next = next->vm_next;
-	while (prev && is_mpx_vma(prev))
+	while (prev && (prev->vm_flags & VM_MPX))
 		prev = prev->vm_prev;
 	/*
 	 * We know 'start' and 'end' lie within an area controlled
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 3250f23..90b924a 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -117,7 +117,7 @@
 		} else {
 			unsigned long addr;
 			unsigned long nr_pages =
-				f->flush_end - f->flush_start / PAGE_SIZE;
+				(f->flush_end - f->flush_start) / PAGE_SIZE;
 			addr = f->flush_start;
 			while (addr < f->flush_end) {
 				__flush_tlb_single(addr);
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 579a8fd..be2e7a2 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -269,7 +269,7 @@
 	EMIT4(0x48, 0x8B, 0x46,                   /* mov rax, qword ptr [rsi + 16] */
 	      offsetof(struct bpf_array, map.max_entries));
 	EMIT3(0x48, 0x39, 0xD0);                  /* cmp rax, rdx */
-#define OFFSET1 44 /* number of bytes to jump */
+#define OFFSET1 47 /* number of bytes to jump */
 	EMIT2(X86_JBE, OFFSET1);                  /* jbe out */
 	label1 = cnt;
 
@@ -278,15 +278,15 @@
 	 */
 	EMIT2_off32(0x8B, 0x85, -STACKSIZE + 36); /* mov eax, dword ptr [rbp - 516] */
 	EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT);     /* cmp eax, MAX_TAIL_CALL_CNT */
-#define OFFSET2 33
+#define OFFSET2 36
 	EMIT2(X86_JA, OFFSET2);                   /* ja out */
 	label2 = cnt;
 	EMIT3(0x83, 0xC0, 0x01);                  /* add eax, 1 */
 	EMIT2_off32(0x89, 0x85, -STACKSIZE + 36); /* mov dword ptr [rbp - 516], eax */
 
 	/* prog = array->prog[index]; */
-	EMIT4(0x48, 0x8D, 0x44, 0xD6);            /* lea rax, [rsi + rdx * 8 + 0x50] */
-	EMIT1(offsetof(struct bpf_array, prog));
+	EMIT4_off32(0x48, 0x8D, 0x84, 0xD6,       /* lea rax, [rsi + rdx * 8 + offsetof(...)] */
+		    offsetof(struct bpf_array, prog));
 	EMIT3(0x48, 0x8B, 0x00);                  /* mov rax, qword ptr [rax] */
 
 	/* if (prog == NULL)
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index cfba30f..e4308fe 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -972,6 +972,11 @@
 
 static int __init arch_parse_efi_cmdline(char *str)
 {
+	if (!str) {
+		pr_warn("need at least one option\n");
+		return -EINVAL;
+	}
+
 	if (parse_option_str(str, "old_map"))
 		set_bit(EFI_OLD_MEMMAP, &efi.flags);
 	if (parse_option_str(str, "debug"))
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 0d7dd1f..9ab5279 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -22,6 +22,7 @@
 #include <asm/fpu/internal.h>
 #include <asm/debugreg.h>
 #include <asm/cpu.h>
+#include <asm/mmu_context.h>
 
 #ifdef CONFIG_X86_32
 __visible unsigned long saved_context_ebx;
@@ -153,7 +154,7 @@
 	syscall_init();				/* This sets MSR_*STAR and related */
 #endif
 	load_TR_desc();				/* This does ltr */
-	load_LDT(&current->active_mm->context);	/* This does lldt */
+	load_mm_ldt(current->active_mm);	/* This does lldt */
 
 	fpu__resume_cpu();
 }
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0b95c9b..11d6fb4 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -483,6 +483,7 @@
 	pte_t pte;
 	unsigned long pfn;
 	struct page *page;
+	unsigned char dummy;
 
 	ptep = lookup_address((unsigned long)v, &level);
 	BUG_ON(ptep == NULL);
@@ -492,6 +493,32 @@
 
 	pte = pfn_pte(pfn, prot);
 
+	/*
+	 * Careful: update_va_mapping() will fail if the virtual address
+	 * we're poking isn't populated in the page tables.  We don't
+	 * need to worry about the direct map (that's always in the page
+	 * tables), but we need to be careful about vmap space.  In
+	 * particular, the top level page table can lazily propagate
+	 * entries between processes, so if we've switched mms since we
+	 * vmapped the target in the first place, we might not have the
+	 * top-level page table entry populated.
+	 *
+	 * We disable preemption because we want the same mm active when
+	 * we probe the target and when we issue the hypercall.  We'll
+	 * have the same nominal mm, but if we're a kernel thread, lazy
+	 * mm dropping could change our pgd.
+	 *
+	 * Out of an abundance of caution, this uses __get_user() to fault
+	 * in the target address just in case there's some obscure case
+	 * in which the target address isn't readable.
+	 */
+
+	preempt_disable();
+
+	pagefault_disable();	/* Avoid warnings due to being atomic. */
+	__get_user(dummy, (unsigned char __user __force *)v);
+	pagefault_enable();
+
 	if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0))
 		BUG();
 
@@ -503,6 +530,8 @@
 				BUG();
 	} else
 		kmap_flush_unused();
+
+	preempt_enable();
 }
 
 static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries)
@@ -510,6 +539,17 @@
 	const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
 	int i;
 
+	/*
+	 * We need to mark the all aliases of the LDT pages RO.  We
+	 * don't need to call vm_flush_aliases(), though, since that's
+	 * only responsible for flushing aliases out the TLBs, not the
+	 * page tables, and Xen will flush the TLB for us if needed.
+	 *
+	 * To avoid confusing future readers: none of this is necessary
+	 * to load the LDT.  The hypervisor only checks this when the
+	 * LDT is faulted in due to subsequent descriptor access.
+	 */
+
 	for(i = 0; i < entries; i += entries_per_page)
 		set_aliased_prot(ldt + i, PAGE_KERNEL_RO);
 }
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index 14d15bf..5b478ac 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -19,6 +19,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += percpu.h
 generic-y += preempt.h
 generic-y += resource.h
diff --git a/arch/xtensa/include/asm/mm-arch-hooks.h b/arch/xtensa/include/asm/mm-arch-hooks.h
deleted file mode 100644
index d2e5cfd..0000000
--- a/arch/xtensa/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_XTENSA_MM_ARCH_HOOKS_H
-#define _ASM_XTENSA_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_XTENSA_MM_ARCH_HOOKS_H */
diff --git a/block/bio-integrity.c b/block/bio-integrity.c
index 0436c21..719b715 100644
--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -51,7 +51,7 @@
 	unsigned long idx = BIO_POOL_NONE;
 	unsigned inline_vecs;
 
-	if (!bs) {
+	if (!bs || !bs->bio_integrity_pool) {
 		bip = kmalloc(sizeof(struct bio_integrity_payload) +
 			      sizeof(struct bio_vec) * nr_vecs, gfp_mask);
 		inline_vecs = nr_vecs;
@@ -104,7 +104,7 @@
 		kfree(page_address(bip->bip_vec->bv_page) +
 		      bip->bip_vec->bv_offset);
 
-	if (bs) {
+	if (bs && bs->bio_integrity_pool) {
 		if (bip->bip_slab != BIO_POOL_NONE)
 			bvec_free(bs->bvec_integrity_pool, bip->bip_vec,
 				  bip->bip_slab);
diff --git a/block/bio.c b/block/bio.c
index 2a00d34..d6e5ba3 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1831,8 +1831,9 @@
  * Allocates and returns a new bio which represents @sectors from the start of
  * @bio, and updates @bio to represent the remaining sectors.
  *
- * The newly allocated bio will point to @bio's bi_io_vec; it is the caller's
- * responsibility to ensure that @bio is not freed before the split.
+ * Unless this is a discard request the newly allocated bio will point
+ * to @bio's bi_io_vec; it is the caller's responsibility to ensure that
+ * @bio is not freed before the split.
  */
 struct bio *bio_split(struct bio *bio, int sectors,
 		      gfp_t gfp, struct bio_set *bs)
@@ -1842,7 +1843,15 @@
 	BUG_ON(sectors <= 0);
 	BUG_ON(sectors >= bio_sectors(bio));
 
-	split = bio_clone_fast(bio, gfp, bs);
+	/*
+	 * Discards need a mutable bio_vec to accommodate the payload
+	 * required by the DSM TRIM and UNMAP commands.
+	 */
+	if (bio->bi_rw & REQ_DISCARD)
+		split = bio_clone_bioset(bio, gfp, bs);
+	else
+		split = bio_clone_fast(bio, gfp, bs);
+
 	if (!split)
 		return NULL;
 
@@ -2009,6 +2018,7 @@
 	bio->bi_css = blkcg_css;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(bio_associate_blkcg);
 
 /**
  * bio_associate_current - associate a bio with %current
@@ -2039,6 +2049,7 @@
 	bio->bi_css = task_get_css(current, blkio_cgrp_id);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(bio_associate_current);
 
 /**
  * bio_disassociate_task - undo bio_associate_current()
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 9f97da5..d6283b3 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -29,6 +29,14 @@
 
 #define MAX_KEY_LEN 100
 
+/*
+ * blkcg_pol_mutex protects blkcg_policy[] and policy [de]activation.
+ * blkcg_pol_register_mutex nests outside of it and synchronizes entire
+ * policy [un]register operations including cgroup file additions /
+ * removals.  Putting cgroup file registration outside blkcg_pol_mutex
+ * allows grabbing it from cgroup callbacks.
+ */
+static DEFINE_MUTEX(blkcg_pol_register_mutex);
 static DEFINE_MUTEX(blkcg_pol_mutex);
 
 struct blkcg blkcg_root;
@@ -38,6 +46,8 @@
 
 static struct blkcg_policy *blkcg_policy[BLKCG_MAX_POLS];
 
+static LIST_HEAD(all_blkcgs);		/* protected by blkcg_pol_mutex */
+
 static bool blkcg_policy_enabled(struct request_queue *q,
 				 const struct blkcg_policy *pol)
 {
@@ -453,20 +463,7 @@
 	struct blkcg_gq *blkg;
 	int i;
 
-	/*
-	 * XXX: We invoke cgroup_add/rm_cftypes() under blkcg_pol_mutex
-	 * which ends up putting cgroup's internal cgroup_tree_mutex under
-	 * it; however, cgroup_tree_mutex is nested above cgroup file
-	 * active protection and grabbing blkcg_pol_mutex from a cgroup
-	 * file operation creates a possible circular dependency.  cgroup
-	 * internal locking is planned to go through further simplification
-	 * and this issue should go away soon.  For now, let's trylock
-	 * blkcg_pol_mutex and restart the write on failure.
-	 *
-	 * http://lkml.kernel.org/g/5363C04B.4010400@oracle.com
-	 */
-	if (!mutex_trylock(&blkcg_pol_mutex))
-		return restart_syscall();
+	mutex_lock(&blkcg_pol_mutex);
 	spin_lock_irq(&blkcg->lock);
 
 	/*
@@ -721,8 +718,12 @@
 		return -EINVAL;
 
 	disk = get_gendisk(MKDEV(major, minor), &part);
-	if (!disk || part)
+	if (!disk)
 		return -EINVAL;
+	if (part) {
+		put_disk(disk);
+		return -EINVAL;
+	}
 
 	rcu_read_lock();
 	spin_lock_irq(disk->queue->queue_lock);
@@ -822,8 +823,17 @@
 {
 	struct blkcg *blkcg = css_to_blkcg(css);
 
-	if (blkcg != &blkcg_root)
+	mutex_lock(&blkcg_pol_mutex);
+	list_del(&blkcg->all_blkcgs_node);
+	mutex_unlock(&blkcg_pol_mutex);
+
+	if (blkcg != &blkcg_root) {
+		int i;
+
+		for (i = 0; i < BLKCG_MAX_POLS; i++)
+			kfree(blkcg->pd[i]);
 		kfree(blkcg);
+	}
 }
 
 static struct cgroup_subsys_state *
@@ -833,6 +843,8 @@
 	struct cgroup_subsys_state *ret;
 	int i;
 
+	mutex_lock(&blkcg_pol_mutex);
+
 	if (!parent_css) {
 		blkcg = &blkcg_root;
 		goto done;
@@ -875,14 +887,17 @@
 #ifdef CONFIG_CGROUP_WRITEBACK
 	INIT_LIST_HEAD(&blkcg->cgwb_list);
 #endif
+	list_add_tail(&blkcg->all_blkcgs_node, &all_blkcgs);
+
+	mutex_unlock(&blkcg_pol_mutex);
 	return &blkcg->css;
 
 free_pd_blkcg:
 	for (i--; i >= 0; i--)
 		kfree(blkcg->pd[i]);
-
 free_blkcg:
 	kfree(blkcg);
+	mutex_unlock(&blkcg_pol_mutex);
 	return ret;
 }
 
@@ -1037,10 +1052,8 @@
 			  const struct blkcg_policy *pol)
 {
 	LIST_HEAD(pds);
-	LIST_HEAD(cpds);
 	struct blkcg_gq *blkg;
 	struct blkg_policy_data *pd, *nd;
-	struct blkcg_policy_data *cpd, *cnd;
 	int cnt = 0, ret;
 
 	if (blkcg_policy_enabled(q, pol))
@@ -1053,10 +1066,7 @@
 		cnt++;
 	spin_unlock_irq(q->queue_lock);
 
-	/*
-	 * Allocate per-blkg and per-blkcg policy data
-	 * for all existing blkgs.
-	 */
+	/* allocate per-blkg policy data for all existing blkgs */
 	while (cnt--) {
 		pd = kzalloc_node(pol->pd_size, GFP_KERNEL, q->node);
 		if (!pd) {
@@ -1064,15 +1074,6 @@
 			goto out_free;
 		}
 		list_add_tail(&pd->alloc_node, &pds);
-
-		if (!pol->cpd_size)
-			continue;
-		cpd = kzalloc_node(pol->cpd_size, GFP_KERNEL, q->node);
-		if (!cpd) {
-			ret = -ENOMEM;
-			goto out_free;
-		}
-		list_add_tail(&cpd->alloc_node, &cpds);
 	}
 
 	/*
@@ -1082,32 +1083,17 @@
 	spin_lock_irq(q->queue_lock);
 
 	list_for_each_entry(blkg, &q->blkg_list, q_node) {
-		if (WARN_ON(list_empty(&pds)) ||
-		    WARN_ON(pol->cpd_size && list_empty(&cpds))) {
+		if (WARN_ON(list_empty(&pds))) {
 			/* umm... this shouldn't happen, just abort */
 			ret = -ENOMEM;
 			goto out_unlock;
 		}
-		cpd = list_first_entry(&cpds, struct blkcg_policy_data,
-				       alloc_node);
-		list_del_init(&cpd->alloc_node);
 		pd = list_first_entry(&pds, struct blkg_policy_data, alloc_node);
 		list_del_init(&pd->alloc_node);
 
 		/* grab blkcg lock too while installing @pd on @blkg */
 		spin_lock(&blkg->blkcg->lock);
 
-		if (!pol->cpd_size)
-			goto no_cpd;
-		if (!blkg->blkcg->pd[pol->plid]) {
-			/* Per-policy per-blkcg data */
-			blkg->blkcg->pd[pol->plid] = cpd;
-			cpd->plid = pol->plid;
-			pol->cpd_init_fn(blkg->blkcg);
-		} else { /* must free it as it has already been extracted */
-			kfree(cpd);
-		}
-no_cpd:
 		blkg->pd[pol->plid] = pd;
 		pd->blkg = blkg;
 		pd->plid = pol->plid;
@@ -1124,8 +1110,6 @@
 	blk_queue_bypass_end(q);
 	list_for_each_entry_safe(pd, nd, &pds, alloc_node)
 		kfree(pd);
-	list_for_each_entry_safe(cpd, cnd, &cpds, alloc_node)
-		kfree(cpd);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(blkcg_activate_policy);
@@ -1162,8 +1146,6 @@
 
 		kfree(blkg->pd[pol->plid]);
 		blkg->pd[pol->plid] = NULL;
-		kfree(blkg->blkcg->pd[pol->plid]);
-		blkg->blkcg->pd[pol->plid] = NULL;
 
 		spin_unlock(&blkg->blkcg->lock);
 	}
@@ -1182,11 +1164,13 @@
  */
 int blkcg_policy_register(struct blkcg_policy *pol)
 {
+	struct blkcg *blkcg;
 	int i, ret;
 
 	if (WARN_ON(pol->pd_size < sizeof(struct blkg_policy_data)))
 		return -EINVAL;
 
+	mutex_lock(&blkcg_pol_register_mutex);
 	mutex_lock(&blkcg_pol_mutex);
 
 	/* find an empty slot */
@@ -1195,19 +1179,49 @@
 		if (!blkcg_policy[i])
 			break;
 	if (i >= BLKCG_MAX_POLS)
-		goto out_unlock;
+		goto err_unlock;
 
-	/* register and update blkgs */
+	/* register @pol */
 	pol->plid = i;
-	blkcg_policy[i] = pol;
+	blkcg_policy[pol->plid] = pol;
+
+	/* allocate and install cpd's */
+	if (pol->cpd_size) {
+		list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node) {
+			struct blkcg_policy_data *cpd;
+
+			cpd = kzalloc(pol->cpd_size, GFP_KERNEL);
+			if (!cpd) {
+				mutex_unlock(&blkcg_pol_mutex);
+				goto err_free_cpds;
+			}
+
+			blkcg->pd[pol->plid] = cpd;
+			cpd->plid = pol->plid;
+			pol->cpd_init_fn(blkcg);
+		}
+	}
+
+	mutex_unlock(&blkcg_pol_mutex);
 
 	/* everything is in place, add intf files for the new policy */
 	if (pol->cftypes)
 		WARN_ON(cgroup_add_legacy_cftypes(&blkio_cgrp_subsys,
 						  pol->cftypes));
-	ret = 0;
-out_unlock:
+	mutex_unlock(&blkcg_pol_register_mutex);
+	return 0;
+
+err_free_cpds:
+	if (pol->cpd_size) {
+		list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node) {
+			kfree(blkcg->pd[pol->plid]);
+			blkcg->pd[pol->plid] = NULL;
+		}
+	}
+	blkcg_policy[pol->plid] = NULL;
+err_unlock:
 	mutex_unlock(&blkcg_pol_mutex);
+	mutex_unlock(&blkcg_pol_register_mutex);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(blkcg_policy_register);
@@ -1220,7 +1234,9 @@
  */
 void blkcg_policy_unregister(struct blkcg_policy *pol)
 {
-	mutex_lock(&blkcg_pol_mutex);
+	struct blkcg *blkcg;
+
+	mutex_lock(&blkcg_pol_register_mutex);
 
 	if (WARN_ON(blkcg_policy[pol->plid] != pol))
 		goto out_unlock;
@@ -1229,9 +1245,19 @@
 	if (pol->cftypes)
 		cgroup_rm_cftypes(pol->cftypes);
 
-	/* unregister and update blkgs */
+	/* remove cpds and unregister */
+	mutex_lock(&blkcg_pol_mutex);
+
+	if (pol->cpd_size) {
+		list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node) {
+			kfree(blkcg->pd[pol->plid]);
+			blkcg->pd[pol->plid] = NULL;
+		}
+	}
 	blkcg_policy[pol->plid] = NULL;
-out_unlock:
+
 	mutex_unlock(&blkcg_pol_mutex);
+out_unlock:
+	mutex_unlock(&blkcg_pol_register_mutex);
 }
 EXPORT_SYMBOL_GPL(blkcg_policy_unregister);
diff --git a/block/blk-core.c b/block/blk-core.c
index 82819e6..627ed0c 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -3370,7 +3370,7 @@
 int __init blk_dev_init(void)
 {
 	BUILD_BUG_ON(__REQ_NR_BITS > 8 *
-			sizeof(((struct request *)0)->cmd_flags));
+			FIELD_SIZEOF(struct request, cmd_flags));
 
 	/* used for unplugging and affects IO latency/throughput - HIGHPRI */
 	kblockd_workqueue = alloc_workqueue("kblockd",
diff --git a/block/blk-mq.c b/block/blk-mq.c
index f537796..7d842db 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1998,7 +1998,7 @@
 		goto err_hctxs;
 
 	setup_timer(&q->timeout, blk_mq_rq_timer, (unsigned long) q);
-	blk_queue_rq_timeout(q, set->timeout ? set->timeout : 30000);
+	blk_queue_rq_timeout(q, set->timeout ? set->timeout : 30 * HZ);
 
 	q->nr_queues = nr_cpu_ids;
 	q->nr_hw_queues = set->nr_hw_queues;
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 569ee09..46b58ab 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -352,13 +352,16 @@
 				pdata->mmio_size = resource_size(rentry->res);
 			pdata->mmio_base = ioremap(rentry->res->start,
 						   pdata->mmio_size);
-			if (!pdata->mmio_base)
-				goto err_out;
 			break;
 		}
 
 	acpi_dev_free_resource_list(&resource_list);
 
+	if (!pdata->mmio_base) {
+		ret = -ENOMEM;
+		goto err_out;
+	}
+
 	pdata->dev_desc = dev_desc;
 
 	if (dev_desc->setup)
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 717afcd..88dbbb1 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -231,7 +231,7 @@
 		dev_warn(&device->dev, "Failed to change power state to %s\n",
 			 acpi_power_state_string(state));
 	} else {
-		device->power.state = state;
+		device->power.state = target_state;
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Device [%s] transitioned to %s\n",
 				  device->pnp.bus_id,
diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c
index 2161fa1..628a42c 100644
--- a/drivers/acpi/nfit.c
+++ b/drivers/acpi/nfit.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/acpi.h>
 #include <linux/sort.h>
+#include <linux/pmem.h>
 #include <linux/io.h>
 #include "nfit.h"
 
@@ -305,6 +306,23 @@
 	return true;
 }
 
+static bool add_flush(struct acpi_nfit_desc *acpi_desc,
+		struct acpi_nfit_flush_address *flush)
+{
+	struct device *dev = acpi_desc->dev;
+	struct nfit_flush *nfit_flush = devm_kzalloc(dev, sizeof(*nfit_flush),
+			GFP_KERNEL);
+
+	if (!nfit_flush)
+		return false;
+	INIT_LIST_HEAD(&nfit_flush->list);
+	nfit_flush->flush = flush;
+	list_add_tail(&nfit_flush->list, &acpi_desc->flushes);
+	dev_dbg(dev, "%s: nfit_flush handle: %d hint_count: %d\n", __func__,
+			flush->device_handle, flush->hint_count);
+	return true;
+}
+
 static void *add_table(struct acpi_nfit_desc *acpi_desc, void *table,
 		const void *end)
 {
@@ -338,7 +356,8 @@
 			return err;
 		break;
 	case ACPI_NFIT_TYPE_FLUSH_ADDRESS:
-		dev_dbg(dev, "%s: flush\n", __func__);
+		if (!add_flush(acpi_desc, table))
+			return err;
 		break;
 	case ACPI_NFIT_TYPE_SMBIOS:
 		dev_dbg(dev, "%s: smbios\n", __func__);
@@ -389,6 +408,7 @@
 {
 	u16 dcr = __to_nfit_memdev(nfit_mem)->region_index;
 	struct nfit_memdev *nfit_memdev;
+	struct nfit_flush *nfit_flush;
 	struct nfit_dcr *nfit_dcr;
 	struct nfit_bdw *nfit_bdw;
 	struct nfit_idt *nfit_idt;
@@ -442,6 +462,14 @@
 			nfit_mem->idt_bdw = nfit_idt->idt;
 			break;
 		}
+
+		list_for_each_entry(nfit_flush, &acpi_desc->flushes, list) {
+			if (nfit_flush->flush->device_handle !=
+					nfit_memdev->memdev->device_handle)
+				continue;
+			nfit_mem->nfit_flush = nfit_flush;
+			break;
+		}
 		break;
 	}
 
@@ -978,6 +1006,24 @@
 	return mmio->base_offset + line_offset + table_offset + sub_line_offset;
 }
 
+static void wmb_blk(struct nfit_blk *nfit_blk)
+{
+
+	if (nfit_blk->nvdimm_flush) {
+		/*
+		 * The first wmb() is needed to 'sfence' all previous writes
+		 * such that they are architecturally visible for the platform
+		 * buffer flush.  Note that we've already arranged for pmem
+		 * writes to avoid the cache via arch_memcpy_to_pmem().  The
+		 * final wmb() ensures ordering for the NVDIMM flush write.
+		 */
+		wmb();
+		writeq(1, nfit_blk->nvdimm_flush);
+		wmb();
+	} else
+		wmb_pmem();
+}
+
 static u64 read_blk_stat(struct nfit_blk *nfit_blk, unsigned int bw)
 {
 	struct nfit_blk_mmio *mmio = &nfit_blk->mmio[DCR];
@@ -1012,7 +1058,10 @@
 		offset = to_interleave_offset(offset, mmio);
 
 	writeq(cmd, mmio->base + offset);
-	/* FIXME: conditionally perform read-back if mandated by firmware */
+	wmb_blk(nfit_blk);
+
+	if (nfit_blk->dimm_flags & ND_BLK_DCR_LATCH)
+		readq(mmio->base + offset);
 }
 
 static int acpi_nfit_blk_single_io(struct nfit_blk *nfit_blk,
@@ -1026,7 +1075,6 @@
 
 	base_offset = nfit_blk->bdw_offset + dpa % L1_CACHE_BYTES
 		+ lane * mmio->size;
-	/* TODO: non-temporal access, flush hints, cache management etc... */
 	write_blk_ctl(nfit_blk, lane, dpa, len, rw);
 	while (len) {
 		unsigned int c;
@@ -1045,13 +1093,19 @@
 		}
 
 		if (rw)
-			memcpy(mmio->aperture + offset, iobuf + copied, c);
+			memcpy_to_pmem(mmio->aperture + offset,
+					iobuf + copied, c);
 		else
-			memcpy(iobuf + copied, mmio->aperture + offset, c);
+			memcpy_from_pmem(iobuf + copied,
+					mmio->aperture + offset, c);
 
 		copied += c;
 		len -= c;
 	}
+
+	if (rw)
+		wmb_blk(nfit_blk);
+
 	rc = read_blk_stat(nfit_blk, lane) ? -EIO : 0;
 	return rc;
 }
@@ -1124,7 +1178,7 @@
 }
 
 static void __iomem *__nfit_spa_map(struct acpi_nfit_desc *acpi_desc,
-		struct acpi_nfit_system_address *spa)
+		struct acpi_nfit_system_address *spa, enum spa_map_type type)
 {
 	resource_size_t start = spa->address;
 	resource_size_t n = spa->length;
@@ -1152,8 +1206,15 @@
 	if (!res)
 		goto err_mem;
 
-	/* TODO: cacheability based on the spa type */
-	spa_map->iomem = ioremap_nocache(start, n);
+	if (type == SPA_MAP_APERTURE) {
+		/*
+		 * TODO: memremap_pmem() support, but that requires cache
+		 * flushing when the aperture is moved.
+		 */
+		spa_map->iomem = ioremap_wc(start, n);
+	} else
+		spa_map->iomem = ioremap_nocache(start, n);
+
 	if (!spa_map->iomem)
 		goto err_map;
 
@@ -1171,6 +1232,7 @@
  * nfit_spa_map - interleave-aware managed-mappings of acpi_nfit_system_address ranges
  * @nvdimm_bus: NFIT-bus that provided the spa table entry
  * @nfit_spa: spa table to map
+ * @type: aperture or control region
  *
  * In the case where block-data-window apertures and
  * dimm-control-regions are interleaved they will end up sharing a
@@ -1180,12 +1242,12 @@
  * unbound.
  */
 static void __iomem *nfit_spa_map(struct acpi_nfit_desc *acpi_desc,
-		struct acpi_nfit_system_address *spa)
+		struct acpi_nfit_system_address *spa, enum spa_map_type type)
 {
 	void __iomem *iomem;
 
 	mutex_lock(&acpi_desc->spa_map_mutex);
-	iomem = __nfit_spa_map(acpi_desc, spa);
+	iomem = __nfit_spa_map(acpi_desc, spa, type);
 	mutex_unlock(&acpi_desc->spa_map_mutex);
 
 	return iomem;
@@ -1206,12 +1268,35 @@
 	return 0;
 }
 
+static int acpi_nfit_blk_get_flags(struct nvdimm_bus_descriptor *nd_desc,
+		struct nvdimm *nvdimm, struct nfit_blk *nfit_blk)
+{
+	struct nd_cmd_dimm_flags flags;
+	int rc;
+
+	memset(&flags, 0, sizeof(flags));
+	rc = nd_desc->ndctl(nd_desc, nvdimm, ND_CMD_DIMM_FLAGS, &flags,
+			sizeof(flags));
+
+	if (rc >= 0 && flags.status == 0)
+		nfit_blk->dimm_flags = flags.flags;
+	else if (rc == -ENOTTY) {
+		/* fall back to a conservative default */
+		nfit_blk->dimm_flags = ND_BLK_DCR_LATCH;
+		rc = 0;
+	} else
+		rc = -ENXIO;
+
+	return rc;
+}
+
 static int acpi_nfit_blk_region_enable(struct nvdimm_bus *nvdimm_bus,
 		struct device *dev)
 {
 	struct nvdimm_bus_descriptor *nd_desc = to_nd_desc(nvdimm_bus);
 	struct acpi_nfit_desc *acpi_desc = to_acpi_desc(nd_desc);
 	struct nd_blk_region *ndbr = to_nd_blk_region(dev);
+	struct nfit_flush *nfit_flush;
 	struct nfit_blk_mmio *mmio;
 	struct nfit_blk *nfit_blk;
 	struct nfit_mem *nfit_mem;
@@ -1223,8 +1308,8 @@
 	if (!nfit_mem || !nfit_mem->dcr || !nfit_mem->bdw) {
 		dev_dbg(dev, "%s: missing%s%s%s\n", __func__,
 				nfit_mem ? "" : " nfit_mem",
-				nfit_mem->dcr ? "" : " dcr",
-				nfit_mem->bdw ? "" : " bdw");
+				(nfit_mem && nfit_mem->dcr) ? "" : " dcr",
+				(nfit_mem && nfit_mem->bdw) ? "" : " bdw");
 		return -ENXIO;
 	}
 
@@ -1237,7 +1322,8 @@
 	/* map block aperture memory */
 	nfit_blk->bdw_offset = nfit_mem->bdw->offset;
 	mmio = &nfit_blk->mmio[BDW];
-	mmio->base = nfit_spa_map(acpi_desc, nfit_mem->spa_bdw);
+	mmio->base = nfit_spa_map(acpi_desc, nfit_mem->spa_bdw,
+			SPA_MAP_APERTURE);
 	if (!mmio->base) {
 		dev_dbg(dev, "%s: %s failed to map bdw\n", __func__,
 				nvdimm_name(nvdimm));
@@ -1259,7 +1345,8 @@
 	nfit_blk->cmd_offset = nfit_mem->dcr->command_offset;
 	nfit_blk->stat_offset = nfit_mem->dcr->status_offset;
 	mmio = &nfit_blk->mmio[DCR];
-	mmio->base = nfit_spa_map(acpi_desc, nfit_mem->spa_dcr);
+	mmio->base = nfit_spa_map(acpi_desc, nfit_mem->spa_dcr,
+			SPA_MAP_CONTROL);
 	if (!mmio->base) {
 		dev_dbg(dev, "%s: %s failed to map dcr\n", __func__,
 				nvdimm_name(nvdimm));
@@ -1277,6 +1364,24 @@
 		return rc;
 	}
 
+	rc = acpi_nfit_blk_get_flags(nd_desc, nvdimm, nfit_blk);
+	if (rc < 0) {
+		dev_dbg(dev, "%s: %s failed get DIMM flags\n",
+				__func__, nvdimm_name(nvdimm));
+		return rc;
+	}
+
+	nfit_flush = nfit_mem->nfit_flush;
+	if (nfit_flush && nfit_flush->flush->hint_count != 0) {
+		nfit_blk->nvdimm_flush = devm_ioremap_nocache(dev,
+				nfit_flush->flush->hint_address[0], 8);
+		if (!nfit_blk->nvdimm_flush)
+			return -ENOMEM;
+	}
+
+	if (!arch_has_pmem_api() && !nfit_blk->nvdimm_flush)
+		dev_warn(dev, "unable to guarantee persistence of writes\n");
+
 	if (mmio->line_size == 0)
 		return 0;
 
@@ -1459,6 +1564,7 @@
 	INIT_LIST_HEAD(&acpi_desc->dcrs);
 	INIT_LIST_HEAD(&acpi_desc->bdws);
 	INIT_LIST_HEAD(&acpi_desc->idts);
+	INIT_LIST_HEAD(&acpi_desc->flushes);
 	INIT_LIST_HEAD(&acpi_desc->memdevs);
 	INIT_LIST_HEAD(&acpi_desc->dimms);
 	mutex_init(&acpi_desc->spa_map_mutex);
diff --git a/drivers/acpi/nfit.h b/drivers/acpi/nfit.h
index 81f2e8c5..79b6d83 100644
--- a/drivers/acpi/nfit.h
+++ b/drivers/acpi/nfit.h
@@ -40,6 +40,10 @@
 	NFIT_UUID_MAX,
 };
 
+enum {
+	ND_BLK_DCR_LATCH = 2,
+};
+
 struct nfit_spa {
 	struct acpi_nfit_system_address *spa;
 	struct list_head list;
@@ -60,6 +64,11 @@
 	struct list_head list;
 };
 
+struct nfit_flush {
+	struct acpi_nfit_flush_address *flush;
+	struct list_head list;
+};
+
 struct nfit_memdev {
 	struct acpi_nfit_memory_map *memdev;
 	struct list_head list;
@@ -77,6 +86,7 @@
 	struct acpi_nfit_system_address *spa_bdw;
 	struct acpi_nfit_interleave *idt_dcr;
 	struct acpi_nfit_interleave *idt_bdw;
+	struct nfit_flush *nfit_flush;
 	struct list_head list;
 	struct acpi_device *adev;
 	unsigned long dsm_mask;
@@ -88,6 +98,7 @@
 	struct mutex spa_map_mutex;
 	struct list_head spa_maps;
 	struct list_head memdevs;
+	struct list_head flushes;
 	struct list_head dimms;
 	struct list_head spas;
 	struct list_head dcrs;
@@ -109,7 +120,7 @@
 	struct nfit_blk_mmio {
 		union {
 			void __iomem *base;
-			void *aperture;
+			void __pmem  *aperture;
 		};
 		u64 size;
 		u64 base_offset;
@@ -123,6 +134,13 @@
 	u64 bdw_offset; /* post interleave offset */
 	u64 stat_offset;
 	u64 cmd_offset;
+	void __iomem *nvdimm_flush;
+	u32 dimm_flags;
+};
+
+enum spa_map_type {
+	SPA_MAP_CONTROL,
+	SPA_MAP_APERTURE,
 };
 
 struct nfit_spa_mapping {
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index c262e4a..3b8963f 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -175,10 +175,14 @@
 	if (!addr || !length)
 		return;
 
-	acpi_reserve_region(addr, length, gas->space_id, 0, desc);
+	/* Resources are never freed */
+	if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO)
+		request_region(addr, length, desc);
+	else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
+		request_mem_region(addr, length, desc);
 }
 
-static void __init acpi_reserve_resources(void)
+static int __init acpi_reserve_resources(void)
 {
 	acpi_request_region(&acpi_gbl_FADT.xpm1a_event_block, acpi_gbl_FADT.pm1_event_length,
 		"ACPI PM1a_EVT_BLK");
@@ -207,7 +211,10 @@
 	if (!(acpi_gbl_FADT.gpe1_block_length & 0x1))
 		acpi_request_region(&acpi_gbl_FADT.xgpe1_block,
 			       acpi_gbl_FADT.gpe1_block_length, "ACPI GPE1_BLK");
+
+	return 0;
 }
+fs_initcall_sync(acpi_reserve_resources);
 
 void acpi_os_printf(const char *fmt, ...)
 {
@@ -1862,7 +1869,6 @@
 
 acpi_status __init acpi_os_initialize1(void)
 {
-	acpi_reserve_resources();
 	kacpid_wq = alloc_workqueue("kacpid", 0, 1);
 	kacpi_notify_wq = alloc_workqueue("kacpi_notify", 0, 1);
 	kacpi_hotplug_wq = alloc_ordered_workqueue("kacpi_hotplug", 0);
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 10561ce..f1c966e 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -26,7 +26,6 @@
 #include <linux/device.h>
 #include <linux/export.h>
 #include <linux/ioport.h>
-#include <linux/list.h>
 #include <linux/slab.h>
 
 #ifdef CONFIG_X86
@@ -194,6 +193,7 @@
 	u8 iodec = attr->granularity == 0xfff ? ACPI_DECODE_10 : ACPI_DECODE_16;
 	bool wp = addr->info.mem.write_protect;
 	u64 len = attr->address_length;
+	u64 start, end, offset = 0;
 	struct resource *res = &win->res;
 
 	/*
@@ -205,9 +205,6 @@
 		pr_debug("ACPI: Invalid address space min_addr_fix %d, max_addr_fix %d, len %llx\n",
 			 addr->min_address_fixed, addr->max_address_fixed, len);
 
-	res->start = attr->minimum;
-	res->end = attr->maximum;
-
 	/*
 	 * For bridges that translate addresses across the bridge,
 	 * translation_offset is the offset that must be added to the
@@ -215,12 +212,22 @@
 	 * primary side. Non-bridge devices must list 0 for all Address
 	 * Translation offset bits.
 	 */
-	if (addr->producer_consumer == ACPI_PRODUCER) {
-		res->start += attr->translation_offset;
-		res->end += attr->translation_offset;
-	} else if (attr->translation_offset) {
+	if (addr->producer_consumer == ACPI_PRODUCER)
+		offset = attr->translation_offset;
+	else if (attr->translation_offset)
 		pr_debug("ACPI: translation_offset(%lld) is invalid for non-bridge device.\n",
 			 attr->translation_offset);
+	start = attr->minimum + offset;
+	end = attr->maximum + offset;
+
+	win->offset = offset;
+	res->start = start;
+	res->end = end;
+	if (sizeof(resource_size_t) < sizeof(u64) &&
+	    (offset != win->offset || start != res->start || end != res->end)) {
+		pr_warn("acpi resource window ([%#llx-%#llx] ignored, not CPU addressable)\n",
+			attr->minimum, attr->maximum);
+		return false;
 	}
 
 	switch (addr->resource_type) {
@@ -237,8 +244,6 @@
 		return false;
 	}
 
-	win->offset = attr->translation_offset;
-
 	if (addr->producer_consumer == ACPI_PRODUCER)
 		res->flags |= IORESOURCE_WINDOW;
 
@@ -622,164 +627,3 @@
 	return (type & types) ? 0 : 1;
 }
 EXPORT_SYMBOL_GPL(acpi_dev_filter_resource_type);
-
-struct reserved_region {
-	struct list_head node;
-	u64 start;
-	u64 end;
-};
-
-static LIST_HEAD(reserved_io_regions);
-static LIST_HEAD(reserved_mem_regions);
-
-static int request_range(u64 start, u64 end, u8 space_id, unsigned long flags,
-			 char *desc)
-{
-	unsigned int length = end - start + 1;
-	struct resource *res;
-
-	res = space_id == ACPI_ADR_SPACE_SYSTEM_IO ?
-		request_region(start, length, desc) :
-		request_mem_region(start, length, desc);
-	if (!res)
-		return -EIO;
-
-	res->flags &= ~flags;
-	return 0;
-}
-
-static int add_region_before(u64 start, u64 end, u8 space_id,
-			     unsigned long flags, char *desc,
-			     struct list_head *head)
-{
-	struct reserved_region *reg;
-	int error;
-
-	reg = kmalloc(sizeof(*reg), GFP_KERNEL);
-	if (!reg)
-		return -ENOMEM;
-
-	error = request_range(start, end, space_id, flags, desc);
-	if (error) {
-		kfree(reg);
-		return error;
-	}
-
-	reg->start = start;
-	reg->end = end;
-	list_add_tail(&reg->node, head);
-	return 0;
-}
-
-/**
- * acpi_reserve_region - Reserve an I/O or memory region as a system resource.
- * @start: Starting address of the region.
- * @length: Length of the region.
- * @space_id: Identifier of address space to reserve the region from.
- * @flags: Resource flags to clear for the region after requesting it.
- * @desc: Region description (for messages).
- *
- * Reserve an I/O or memory region as a system resource to prevent others from
- * using it.  If the new region overlaps with one of the regions (in the given
- * address space) already reserved by this routine, only the non-overlapping
- * parts of it will be reserved.
- *
- * Returned is either 0 (success) or a negative error code indicating a resource
- * reservation problem.  It is the code of the first encountered error, but the
- * routine doesn't abort until it has attempted to request all of the parts of
- * the new region that don't overlap with other regions reserved previously.
- *
- * The resources requested by this routine are never released.
- */
-int acpi_reserve_region(u64 start, unsigned int length, u8 space_id,
-			unsigned long flags, char *desc)
-{
-	struct list_head *regions;
-	struct reserved_region *reg;
-	u64 end = start + length - 1;
-	int ret = 0, error = 0;
-
-	if (space_id == ACPI_ADR_SPACE_SYSTEM_IO)
-		regions = &reserved_io_regions;
-	else if (space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
-		regions = &reserved_mem_regions;
-	else
-		return -EINVAL;
-
-	if (list_empty(regions))
-		return add_region_before(start, end, space_id, flags, desc, regions);
-
-	list_for_each_entry(reg, regions, node)
-		if (reg->start == end + 1) {
-			/* The new region can be prepended to this one. */
-			ret = request_range(start, end, space_id, flags, desc);
-			if (!ret)
-				reg->start = start;
-
-			return ret;
-		} else if (reg->start > end) {
-			/* No overlap.  Add the new region here and get out. */
-			return add_region_before(start, end, space_id, flags,
-						 desc, &reg->node);
-		} else if (reg->end == start - 1) {
-			goto combine;
-		} else if (reg->end >= start) {
-			goto overlap;
-		}
-
-	/* The new region goes after the last existing one. */
-	return add_region_before(start, end, space_id, flags, desc, regions);
-
- overlap:
-	/*
-	 * The new region overlaps an existing one.
-	 *
-	 * The head part of the new region immediately preceding the existing
-	 * overlapping one can be combined with it right away.
-	 */
-	if (reg->start > start) {
-		error = request_range(start, reg->start - 1, space_id, flags, desc);
-		if (error)
-			ret = error;
-		else
-			reg->start = start;
-	}
-
- combine:
-	/*
-	 * The new region is adjacent to an existing one.  If it extends beyond
-	 * that region all the way to the next one, it is possible to combine
-	 * all three of them.
-	 */
-	while (reg->end < end) {
-		struct reserved_region *next = NULL;
-		u64 a = reg->end + 1, b = end;
-
-		if (!list_is_last(&reg->node, regions)) {
-			next = list_next_entry(reg, node);
-			if (next->start <= end)
-				b = next->start - 1;
-		}
-		error = request_range(a, b, space_id, flags, desc);
-		if (!error) {
-			if (next && next->start == b + 1) {
-				reg->end = next->end;
-				list_del(&next->node);
-				kfree(next);
-			} else {
-				reg->end = end;
-				break;
-			}
-		} else if (next) {
-			if (!ret)
-				ret = error;
-
-			reg = next;
-		} else {
-			break;
-		}
-	}
-
-	return ret ? ret : error;
-}
-EXPORT_SYMBOL_GPL(acpi_reserve_region);
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 2649a06..ec25635 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1019,6 +1019,29 @@
 	return false;
 }
 
+static bool __acpi_match_device_cls(const struct acpi_device_id *id,
+				    struct acpi_hardware_id *hwid)
+{
+	int i, msk, byte_shift;
+	char buf[3];
+
+	if (!id->cls)
+		return false;
+
+	/* Apply class-code bitmask, before checking each class-code byte */
+	for (i = 1; i <= 3; i++) {
+		byte_shift = 8 * (3 - i);
+		msk = (id->cls_msk >> byte_shift) & 0xFF;
+		if (!msk)
+			continue;
+
+		sprintf(buf, "%02x", (id->cls >> byte_shift) & msk);
+		if (strncmp(buf, &hwid->id[(i - 1) * 2], 2))
+			return false;
+	}
+	return true;
+}
+
 static const struct acpi_device_id *__acpi_match_device(
 	struct acpi_device *device,
 	const struct acpi_device_id *ids,
@@ -1036,9 +1059,12 @@
 
 	list_for_each_entry(hwid, &device->pnp.ids, list) {
 		/* First, check the ACPI/PNP IDs provided by the caller. */
-		for (id = ids; id->id[0]; id++)
-			if (!strcmp((char *) id->id, hwid->id))
+		for (id = ids; id->id[0] || id->cls; id++) {
+			if (id->id[0] && !strcmp((char *) id->id, hwid->id))
 				return id;
+			else if (id->cls && __acpi_match_device_cls(id, hwid))
+				return id;
+		}
 
 		/*
 		 * Next, check ACPI_DT_NAMESPACE_HID and try to match the
@@ -2101,6 +2127,8 @@
 		if (info->valid & ACPI_VALID_UID)
 			pnp->unique_id = kstrdup(info->unique_id.string,
 							GFP_KERNEL);
+		if (info->valid & ACPI_VALID_CLS)
+			acpi_add_id(pnp, info->class_code.string);
 
 		kfree(info);
 
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6d17a3b..15e40ee 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -48,7 +48,7 @@
 
 config ATA_ACPI
 	bool "ATA ACPI Support"
-	depends on ACPI && PCI
+	depends on ACPI
 	default y
 	help
 	  This option adds support for ATA-related ACPI objects.
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 614c78f..1befb11 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -20,6 +20,8 @@
 #include <linux/platform_device.h>
 #include <linux/libata.h>
 #include <linux/ahci_platform.h>
+#include <linux/acpi.h>
+#include <linux/pci_ids.h>
 #include "ahci.h"
 
 #define DRV_NAME "ahci"
@@ -79,12 +81,19 @@
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);
 
+static const struct acpi_device_id ahci_acpi_match[] = {
+	{ ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, ahci_acpi_match);
+
 static struct platform_driver ahci_driver = {
 	.probe = ahci_probe,
 	.remove = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_of_match,
+		.acpi_match_table = ahci_acpi_match,
 		.pm = &ahci_pm_ops,
 	},
 };
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e83fc3d..db5d9f7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2478,6 +2478,10 @@
 		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
 					 dev->max_sectors);
 
+	if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024)
+		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024,
+					 dev->max_sectors);
+
 	if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48)
 		dev->max_sectors = ATA_MAX_SECTORS_LBA48;
 
@@ -4146,6 +4150,12 @@
 	{ "Slimtype DVD A  DS8A8SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 	{ "Slimtype DVD A  DS8A9SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 
+	/*
+	 * Causes silent data corruption with higher max sects.
+	 * http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com
+	 */
+	{ "ST380013AS",		"3.20",		ATA_HORKAGE_MAX_SEC_1024 },
+
 	/* Devices we expect to fail diagnostics */
 
 	/* Devices where NCQ should be avoided */
@@ -4174,9 +4184,10 @@
 	{ "ST3320[68]13AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	/* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+	/* drives which fail FPDMA_AA activation (some may freeze afterwards) */
 	{ "ST1000LM024 HN-M101MBB", "2AR10001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
 	{ "ST1000LM024 HN-M101MBB", "2BA30001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
+	{ "VB0250EAVER",	"HPG7",		ATA_HORKAGE_BROKEN_FPDMA_AA },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132
 	   Windows driver .inf file - also several Linux problem reports */
@@ -4229,7 +4240,7 @@
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
-	{ "Micron_M5[15]0*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
+	{ "Micron_M5[15]0_*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*M550*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -4238,6 +4249,9 @@
 	{ "Samsung SSD 8*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 
+	/* devices that don't properly handle TRIM commands */
+	{ "SuperSSpeed S238*",		NULL,	ATA_HORKAGE_NOTRIM, },
+
 	/*
 	 * As defined, the DRAT (Deterministic Read After Trim) and RZAT
 	 * (Return Zero After Trim) flags in the ATA Command Set are
@@ -4501,7 +4515,8 @@
 	else /* In the ancient relic department - skip all of this */
 		return 0;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	/* On some disks, this command causes spin-up, so we need longer timeout */
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000);
 
 	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 7ccc084..85aa761 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -460,6 +460,13 @@
 				       ATA_LFLAG_NO_SRST |
 				       ATA_LFLAG_ASSUME_ATA;
 		}
+	} else if (vendor == 0x11ab && devid == 0x4140) {
+		/* Marvell 4140 quirks */
+		ata_for_each_link(link, ap, EDGE) {
+			/* port 4 is for SEMB device and it doesn't like SRST */
+			if (link->pmp == 4)
+				link->flags |= ATA_LFLAG_DISABLED;
+		}
 	}
 }
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3131adc..641a61a 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2568,7 +2568,8 @@
 		rbuf[14] = (lowest_aligned >> 8) & 0x3f;
 		rbuf[15] = lowest_aligned;
 
-		if (ata_id_has_trim(args->id)) {
+		if (ata_id_has_trim(args->id) &&
+		    !(dev->horkage & ATA_HORKAGE_NOTRIM)) {
 			rbuf[14] |= 0x80; /* LBPME */
 
 			if (ata_id_has_zero_after_trim(args->id) &&
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index d6c37bc..e2d9497 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -569,6 +569,8 @@
 
 	if (!ata_id_has_trim(ata_dev->id))
 		mode = "unsupported";
+	else if (ata_dev->horkage & ATA_HORKAGE_NOTRIM)
+		mode = "forced_unsupported";
 	else if (ata_dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM)
 			mode = "forced_unqueued";
 	else if (ata_fpdma_dsm_supported(ata_dev))
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index a9b0c82..5d9ee99 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -4,7 +4,7 @@
  * Arasan Compact Flash host controller source file
  *
  * Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -968,7 +968,7 @@
 
 module_platform_driver(arasan_cf_driver);
 
-MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
+MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>");
 MODULE_DESCRIPTION("Arasan ATA Compact Flash driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 9c42883..894bda1 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -563,10 +563,8 @@
 	kfree(fw_priv);
 }
 
-static int firmware_uevent(struct device *dev, struct kobj_uevent_env *env)
+static int do_firmware_uevent(struct firmware_priv *fw_priv, struct kobj_uevent_env *env)
 {
-	struct firmware_priv *fw_priv = to_firmware_priv(dev);
-
 	if (add_uevent_var(env, "FIRMWARE=%s", fw_priv->buf->fw_id))
 		return -ENOMEM;
 	if (add_uevent_var(env, "TIMEOUT=%i", loading_timeout))
@@ -577,6 +575,18 @@
 	return 0;
 }
 
+static int firmware_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct firmware_priv *fw_priv = to_firmware_priv(dev);
+	int err = 0;
+
+	mutex_lock(&fw_lock);
+	if (fw_priv->buf)
+		err = do_firmware_uevent(fw_priv, env);
+	mutex_unlock(&fw_lock);
+	return err;
+}
+
 static struct class firmware_class = {
 	.name		= "firmware",
 	.class_attrs	= firmware_class_attrs,
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index cdd547b..0ee43c1 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -6,6 +6,7 @@
  * This file is released under the GPLv2.
  */
 
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
@@ -19,6 +20,8 @@
 #include <linux/suspend.h>
 #include <linux/export.h>
 
+#define GENPD_RETRY_MAX_MS	250		/* Approximate */
+
 #define GENPD_DEV_CALLBACK(genpd, type, callback, dev)		\
 ({								\
 	type (*__routine)(struct device *__d); 			\
@@ -2131,6 +2134,7 @@
 static void genpd_dev_pm_detach(struct device *dev, bool power_off)
 {
 	struct generic_pm_domain *pd;
+	unsigned int i;
 	int ret = 0;
 
 	pd = pm_genpd_lookup_dev(dev);
@@ -2139,10 +2143,12 @@
 
 	dev_dbg(dev, "removing from PM domain %s\n", pd->name);
 
-	while (1) {
+	for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
 		ret = pm_genpd_remove_device(pd, dev);
 		if (ret != -EAGAIN)
 			break;
+
+		mdelay(i);
 		cond_resched();
 	}
 
@@ -2183,6 +2189,7 @@
 {
 	struct of_phandle_args pd_args;
 	struct generic_pm_domain *pd;
+	unsigned int i;
 	int ret;
 
 	if (!dev->of_node)
@@ -2218,10 +2225,12 @@
 
 	dev_dbg(dev, "adding to PM domain %s\n", pd->name);
 
-	while (1) {
+	for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
 		ret = pm_genpd_add_device(pd, dev);
 		if (ret != -EAGAIN)
 			break;
+
+		mdelay(i);
 		cond_resched();
 	}
 
diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c
index 7470004..eb6e674 100644
--- a/drivers/base/power/wakeirq.c
+++ b/drivers/base/power/wakeirq.c
@@ -45,14 +45,12 @@
 		return -EEXIST;
 	}
 
-	dev->power.wakeirq = wirq;
-	spin_unlock_irqrestore(&dev->power.lock, flags);
-
 	err = device_wakeup_attach_irq(dev, wirq);
-	if (err)
-		return err;
+	if (!err)
+		dev->power.wakeirq = wirq;
 
-	return 0;
+	spin_unlock_irqrestore(&dev->power.lock, flags);
+	return err;
 }
 
 /**
@@ -105,10 +103,10 @@
 		return;
 
 	spin_lock_irqsave(&dev->power.lock, flags);
+	device_wakeup_detach_irq(dev);
 	dev->power.wakeirq = NULL;
 	spin_unlock_irqrestore(&dev->power.lock, flags);
 
-	device_wakeup_detach_irq(dev);
 	if (wirq->dedicated_irq)
 		free_irq(wirq->irq, wirq);
 	kfree(wirq);
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index 40f7160..51f15bc 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -281,32 +281,25 @@
  * Attach a device wakeirq to the wakeup source so the device
  * wake IRQ can be configured automatically for suspend and
  * resume.
+ *
+ * Call under the device's power.lock lock.
  */
 int device_wakeup_attach_irq(struct device *dev,
 			     struct wake_irq *wakeirq)
 {
 	struct wakeup_source *ws;
-	int ret = 0;
 
-	spin_lock_irq(&dev->power.lock);
 	ws = dev->power.wakeup;
 	if (!ws) {
 		dev_err(dev, "forgot to call call device_init_wakeup?\n");
-		ret = -EINVAL;
-		goto unlock;
+		return -EINVAL;
 	}
 
-	if (ws->wakeirq) {
-		ret = -EEXIST;
-		goto unlock;
-	}
+	if (ws->wakeirq)
+		return -EEXIST;
 
 	ws->wakeirq = wakeirq;
-
-unlock:
-	spin_unlock_irq(&dev->power.lock);
-
-	return ret;
+	return 0;
 }
 
 /**
@@ -314,20 +307,16 @@
  * @dev: Device to handle
  *
  * Removes a device wakeirq from the wakeup source.
+ *
+ * Call under the device's power.lock lock.
  */
 void device_wakeup_detach_irq(struct device *dev)
 {
 	struct wakeup_source *ws;
 
-	spin_lock_irq(&dev->power.lock);
 	ws = dev->power.wakeup;
-	if (!ws)
-		goto unlock;
-
-	ws->wakeirq = NULL;
-
-unlock:
-	spin_unlock_irq(&dev->power.lock);
+	if (ws)
+		ws->wakeirq = NULL;
 }
 
 /**
diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c
index 69de41a..3177b24 100644
--- a/drivers/block/null_blk.c
+++ b/drivers/block/null_blk.c
@@ -240,19 +240,19 @@
 	while ((entry = llist_del_all(&cq->list)) != NULL) {
 		entry = llist_reverse_order(entry);
 		do {
+			struct request_queue *q = NULL;
+
 			cmd = container_of(entry, struct nullb_cmd, ll_list);
 			entry = entry->next;
+			if (cmd->rq)
+				q = cmd->rq->q;
 			end_cmd(cmd);
 
-			if (cmd->rq) {
-				struct request_queue *q = cmd->rq->q;
-
-				if (!q->mq_ops && blk_queue_stopped(q)) {
-					spin_lock(q->queue_lock);
-					if (blk_queue_stopped(q))
-						blk_start_queue(q);
-					spin_unlock(q->queue_lock);
-				}
+			if (q && !q->mq_ops && blk_queue_stopped(q)) {
+				spin_lock(q->queue_lock);
+				if (blk_queue_stopped(q))
+					blk_start_queue(q);
+				spin_unlock(q->queue_lock);
 			}
 		} while (entry);
 	}
diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c
index d1d6141..7920c27 100644
--- a/drivers/block/nvme-core.c
+++ b/drivers/block/nvme-core.c
@@ -2108,8 +2108,17 @@
 		goto out_free_disk;
 
 	add_disk(ns->disk);
-	if (ns->ms)
-		revalidate_disk(ns->disk);
+	if (ns->ms) {
+		struct block_device *bd = bdget_disk(ns->disk, 0);
+		if (!bd)
+			return;
+		if (blkdev_get(bd, FMODE_READ, NULL)) {
+			bdput(bd);
+			return;
+		}
+		blkdev_reread_part(bd);
+		blkdev_put(bd, FMODE_READ);
+	}
 	return;
  out_free_disk:
 	kfree(disk);
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 1e1a432..9ceb8ac 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -472,12 +472,11 @@
 
 	/* Read Verbose Config Version Info */
 	skb = btbcm_read_verbose_config(hdev);
-	if (IS_ERR(skb))
-		return PTR_ERR(skb);
-
-	BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
-		get_unaligned_le16(skb->data + 5));
-	kfree_skb(skb);
+	if (!IS_ERR(skb)) {
+		BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
+			get_unaligned_le16(skb->data + 5));
+		kfree_skb(skb);
+	}
 
 	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 
diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
index 283f00a..1082d4b 100644
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -129,8 +129,9 @@
 
 	device_initialize(&chip->dev);
 
-	chip->cdev.owner = chip->pdev->driver->owner;
 	cdev_init(&chip->cdev, &tpm_fops);
+	chip->cdev.owner = chip->pdev->driver->owner;
+	chip->cdev.kobj.parent = &chip->dev.kobj;
 
 	return chip;
 }
diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 44f9d20..1267322 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -233,6 +233,14 @@
 		return -ENODEV;
 	}
 
+	/* At least some versions of AMI BIOS have a bug that TPM2 table has
+	 * zero address for the control area and therefore we must fail.
+	*/
+	if (!buf->control_area_pa) {
+		dev_err(dev, "TPM2 ACPI table has a zero address for the control area\n");
+		return -EINVAL;
+	}
+
 	if (buf->hdr.length < sizeof(struct acpi_tpm2)) {
 		dev_err(dev, "TPM2 ACPI table has wrong size");
 		return -EINVAL;
diff --git a/drivers/clk/at91/clk-h32mx.c b/drivers/clk/at91/clk-h32mx.c
index 152dcb3..61566bc 100644
--- a/drivers/clk/at91/clk-h32mx.c
+++ b/drivers/clk/at91/clk-h32mx.c
@@ -116,8 +116,10 @@
 	h32mxclk->pmc = pmc;
 
 	clk = clk_register(NULL, &h32mxclk->hw);
-	if (!clk)
+	if (!clk) {
+		kfree(h32mxclk);
 		return;
+	}
 
 	of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index c240045..27dfa96 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -171,8 +171,10 @@
 	irq_set_status_flags(osc->irq, IRQ_NOAUTOEN);
 	ret = request_irq(osc->irq, clk_main_osc_irq_handler,
 			  IRQF_TRIGGER_HIGH, name, osc);
-	if (ret)
+	if (ret) {
+		kfree(osc);
 		return ERR_PTR(ret);
+	}
 
 	if (bypass)
 		pmc_write(pmc, AT91_CKGR_MOR,
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
index f98eafe..5b3ded5 100644
--- a/drivers/clk/at91/clk-master.c
+++ b/drivers/clk/at91/clk-master.c
@@ -165,12 +165,16 @@
 	irq_set_status_flags(master->irq, IRQ_NOAUTOEN);
 	ret = request_irq(master->irq, clk_master_irq_handler,
 			  IRQF_TRIGGER_HIGH, "clk-master", master);
-	if (ret)
+	if (ret) {
+		kfree(master);
 		return ERR_PTR(ret);
+	}
 
 	clk = clk_register(NULL, &master->hw);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
+		free_irq(master->irq, master);
 		kfree(master);
+	}
 
 	return clk;
 }
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index cbbe403..18b60f4 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -346,12 +346,16 @@
 	irq_set_status_flags(pll->irq, IRQ_NOAUTOEN);
 	ret = request_irq(pll->irq, clk_pll_irq_handler, IRQF_TRIGGER_HIGH,
 			  id ? "clk-pllb" : "clk-plla", pll);
-	if (ret)
+	if (ret) {
+		kfree(pll);
 		return ERR_PTR(ret);
+	}
 
 	clk = clk_register(NULL, &pll->hw);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
+		free_irq(pll->irq, pll);
 		kfree(pll);
+	}
 
 	return clk;
 }
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
index a76d03f..58008b3 100644
--- a/drivers/clk/at91/clk-system.c
+++ b/drivers/clk/at91/clk-system.c
@@ -130,13 +130,17 @@
 		irq_set_status_flags(sys->irq, IRQ_NOAUTOEN);
 		ret = request_irq(sys->irq, clk_system_irq_handler,
 				IRQF_TRIGGER_HIGH, name, sys);
-		if (ret)
+		if (ret) {
+			kfree(sys);
 			return ERR_PTR(ret);
+		}
 	}
 
 	clk = clk_register(NULL, &sys->hw);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
+		free_irq(sys->irq, sys);
 		kfree(sys);
+	}
 
 	return clk;
 }
diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
index ae3263b..30dd697 100644
--- a/drivers/clk/at91/clk-utmi.c
+++ b/drivers/clk/at91/clk-utmi.c
@@ -118,12 +118,16 @@
 	irq_set_status_flags(utmi->irq, IRQ_NOAUTOEN);
 	ret = request_irq(utmi->irq, clk_utmi_irq_handler,
 			  IRQF_TRIGGER_HIGH, "clk-utmi", utmi);
-	if (ret)
+	if (ret) {
+		kfree(utmi);
 		return ERR_PTR(ret);
+	}
 
 	clk = clk_register(NULL, &utmi->hw);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
+		free_irq(utmi->irq, utmi);
 		kfree(utmi);
+	}
 
 	return clk;
 }
diff --git a/drivers/clk/bcm/clk-iproc-asiu.c b/drivers/clk/bcm/clk-iproc-asiu.c
index e19c09c..f630e1b 100644
--- a/drivers/clk/bcm/clk-iproc-asiu.c
+++ b/drivers/clk/bcm/clk-iproc-asiu.c
@@ -222,10 +222,6 @@
 		struct iproc_asiu_clk *asiu_clk;
 		const char *clk_name;
 
-		clk_name = kzalloc(IPROC_CLK_NAME_LEN, GFP_KERNEL);
-		if (WARN_ON(!clk_name))
-			goto err_clk_register;
-
 		ret = of_property_read_string_index(node, "clock-output-names",
 						    i, &clk_name);
 		if (WARN_ON(ret))
@@ -259,7 +255,7 @@
 
 err_clk_register:
 	for (i = 0; i < num_clks; i++)
-		kfree(asiu->clks[i].name);
+		clk_unregister(asiu->clk_data.clks[i]);
 	iounmap(asiu->gate_base);
 
 err_iomap_gate:
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c
index 46fb84b..2dda4e8 100644
--- a/drivers/clk/bcm/clk-iproc-pll.c
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -366,7 +366,7 @@
 	val = readl(pll->pll_base + ctrl->ndiv_int.offset);
 	ndiv_int = (val >> ctrl->ndiv_int.shift) &
 		bit_mask(ctrl->ndiv_int.width);
-	ndiv = ndiv_int << ctrl->ndiv_int.shift;
+	ndiv = (u64)ndiv_int << ctrl->ndiv_int.shift;
 
 	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
 		val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
@@ -374,7 +374,8 @@
 			bit_mask(ctrl->ndiv_frac.width);
 
 		if (ndiv_frac != 0)
-			ndiv = (ndiv_int << ctrl->ndiv_int.shift) | ndiv_frac;
+			ndiv = ((u64)ndiv_int << ctrl->ndiv_int.shift) |
+				ndiv_frac;
 	}
 
 	val = readl(pll->pll_base + ctrl->pdiv.offset);
@@ -655,10 +656,6 @@
 		memset(&init, 0, sizeof(init));
 		parent_name = node->name;
 
-		clk_name = kzalloc(IPROC_CLK_NAME_LEN, GFP_KERNEL);
-		if (WARN_ON(!clk_name))
-			goto err_clk_register;
-
 		ret = of_property_read_string_index(node, "clock-output-names",
 						    i, &clk_name);
 		if (WARN_ON(ret))
@@ -690,10 +687,8 @@
 	return;
 
 err_clk_register:
-	for (i = 0; i < num_clks; i++) {
-		kfree(pll->clks[i].name);
+	for (i = 0; i < num_clks; i++)
 		clk_unregister(pll->clk_data.clks[i]);
-	}
 
 err_pll_register:
 	if (pll->asiu_base)
diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index b9b12a7..3f6f7ad 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -268,7 +268,7 @@
 	memcpy(table, stm32f42xx_gate_map, sizeof(table));
 
 	/* only bits set in table can be used as indices */
-	if (WARN_ON(secondary > 8 * sizeof(table) ||
+	if (WARN_ON(secondary >= BITS_PER_BYTE * sizeof(table) ||
 		    0 == (table[BIT_ULL_WORD(secondary)] &
 			  BIT_ULL_MASK(secondary))))
 		return -EINVAL;
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 4b9e04c..8b6523d 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -700,6 +700,22 @@
 	MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents, 0x40c, 3, 1),
 };
 
+static struct clk_onecell_data *mt8173_top_clk_data __initdata;
+static struct clk_onecell_data *mt8173_pll_clk_data __initdata;
+
+static void __init mtk_clk_enable_critical(void)
+{
+	if (!mt8173_top_clk_data || !mt8173_pll_clk_data)
+		return;
+
+	clk_prepare_enable(mt8173_pll_clk_data->clks[CLK_APMIXED_ARMCA15PLL]);
+	clk_prepare_enable(mt8173_pll_clk_data->clks[CLK_APMIXED_ARMCA7PLL]);
+	clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_MEM_SEL]);
+	clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_DDRPHYCFG_SEL]);
+	clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_CCI400_SEL]);
+	clk_prepare_enable(mt8173_top_clk_data->clks[CLK_TOP_RTC_SEL]);
+}
+
 static void __init mtk_topckgen_init(struct device_node *node)
 {
 	struct clk_onecell_data *clk_data;
@@ -712,19 +728,19 @@
 		return;
 	}
 
-	clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
+	mt8173_top_clk_data = clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
 
 	mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
 	mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
 	mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base,
 			&mt8173_clk_lock, clk_data);
 
-	clk_prepare_enable(clk_data->clks[CLK_TOP_CCI400_SEL]);
-
 	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
 	if (r)
 		pr_err("%s(): could not register clock provider: %d\n",
 			__func__, r);
+
+	mtk_clk_enable_critical();
 }
 CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8173-topckgen", mtk_topckgen_init);
 
@@ -818,13 +834,13 @@
 {
 	struct clk_onecell_data *clk_data;
 
-	clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
+	mt8173_pll_clk_data = clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
 	if (!clk_data)
 		return;
 
 	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
 
-	clk_prepare_enable(clk_data->clks[CLK_APMIXED_ARMCA15PLL]);
+	mtk_clk_enable_critical();
 }
 CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8173-apmixedsys",
 		mtk_apmixedsys_init);
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index b95d17f..92936f0 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -530,19 +530,16 @@
 	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
 	struct freq_tbl f = *rcg->freq_tbl;
 	const struct frac_entry *frac = frac_table_pixel;
-	unsigned long request, src_rate;
+	unsigned long request;
 	int delta = 100000;
 	u32 mask = BIT(rcg->hid_width) - 1;
 	u32 hid_div;
-	int index = qcom_find_src_index(hw, rcg->parent_map, f.src);
-	struct clk *parent = clk_get_parent_by_index(hw->clk, index);
 
 	for (; frac->num; frac++) {
 		request = (rate * frac->den) / frac->num;
 
-		src_rate = __clk_round_rate(parent, request);
-		if ((src_rate < (request - delta)) ||
-			(src_rate > (request + delta)))
+		if ((parent_rate <