Merge tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs fixes from Dave Chinner:
 "There are a couple of recently found, long standing remote attribute
  corruption fixes caused by log recovery getting confused after a
  crash, and the new DAX code in XFS (merged in 4.2-rc1) needs to
  actually use the DAX fault path on read faults.

  Summary:

   - remote attribute log recovery corruption fixes

   - DAX page faults need to use direct mappings, not a page cache
     mapping"

* tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: remote attributes need to be considered data
  xfs: remote attribute headers contain an invalid LSN
  xfs: call dax_fault on read page faults for DAX
diff --git a/.mailmap b/.mailmap
index 977f958..b4091b7 100644
--- a/.mailmap
+++ b/.mailmap
@@ -116,6 +116,7 @@
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>
+Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
 Sumit Semwal <sumit.semwal@ti.com>
 Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
@@ -125,7 +126,9 @@
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
-Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index bbed111..70c9b1a 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1234,10 +1234,8 @@
 		object is near the sensor, usually be observing
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
-		to SI units is not possible.  Where it is, the units should
-		be meters.  If such a conversion is not possible, the reported
-		values should behave in the same way as a distance, i.e. lower
-		values indicate something is closer to the sensor.
+		to SI units is not possible. Higher proximity measurements
+		indicate closer objects, and vice versa.
 
 What:		/sys/.../iio:deviceX/in_illuminance_input
 What:		/sys/.../iio:deviceX/in_illuminance_raw
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index c0312cb..2fb9a54 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -3383,7 +3383,7 @@
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="2" valign="top" >omap</td>
+	<td valign="top" >omap</td>
 	<td valign="top" >Generic</td>
 	<td valign="top" >“zorder”</td>
 	<td valign="top" >RANGE</td>
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 65610bf5..1b049be 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -60,4 +60,4 @@
   Document Author
   ---------------
 
-  Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
+  Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index 82960cf..785eab8 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -258,6 +258,12 @@
 	no further I/O will be permitted and the status will just
 	contain the string 'Fail'.  The userspace recovery tools
 	should then be used.
+needs_check		 : 'needs_check' if set, '-' if not set
+	A metadata operation has failed, resulting in the needs_check
+	flag being set in the metadata's superblock.  The metadata
+	device must be deactivated and checked/repaired before the
+	cache can be made fully operational again.  '-' indicates
+	needs_check is not set.
 
 Messages
 --------
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index 4f67578..1699a55 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -296,7 +296,7 @@
 	underlying device.  When this is enabled when loading the table,
 	it can get disabled if the underlying device doesn't support it.
 
-    ro|rw
+    ro|rw|out_of_data_space
 	If the pool encounters certain types of device failures it will
 	drop into a read-only metadata mode in which no changes to
 	the pool metadata (like allocating new blocks) are permitted.
@@ -314,6 +314,13 @@
 	module parameter can be used to change this timeout -- it
 	defaults to 60 seconds but may be disabled using a value of 0.
 
+    needs_check
+	A metadata operation has failed, resulting in the needs_check
+	flag being set in the metadata's superblock.  The metadata
+	device must be deactivated and checked/repaired before the
+	thin-pool can be made fully operational again.  '-' indicates
+	needs_check is not set.
+
 iii) Messages
 
     create_thin <dev id>
diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
index e75f0e5..971c3ee 100644
--- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
@@ -65,8 +65,10 @@
 - edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel
-- port: A port node with endpoint definitions as defined in
+- port@[0-1]: Port nodes with endpoint definitions as defined in
   Documentation/devicetree/bindings/media/video-interfaces.txt.
+  Port 0 is the input port connected to the IPU display interface,
+  port 1 is the output port connected to a panel.
 
 example:
 
@@ -75,9 +77,29 @@
 	edid = [edid-data];
 	interface-pix-fmt = "rgb24";
 
-	port {
+	port@0 {
+		reg = <0>;
+
 		display_in: endpoint {
 			remote-endpoint = <&ipu_di0_disp0>;
 		};
 	};
+
+	port@1 {
+		reg = <1>;
+
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+panel {
+	...
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&display_out>;
+		};
+	};
 };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
index c03eec1..3443e0f 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
@@ -35,3 +35,6 @@
 
                       NOTE: this only applies to the SMMU itself, not
                       masters connected upstream of the SMMU.
+
+- hisilicon,broken-prefetch-cmd
+                    : Avoid sending CMD_PREFETCH_* commands to the SMMU.
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index 5d0376b..211e778 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -17,7 +17,6 @@
 	       "fsl,imx6sx-usdhc"
 
 Optional properties:
-- fsl,cd-controller : Indicate to use controller internal card detection
 - fsl,wp-controller : Indicate to use controller internal write protection
 - fsl,delay-line : Specify the number of delay cells for override mode.
   This is used to set the clock delay for DLL(Delay Line) on override mode
@@ -35,7 +34,6 @@
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-controller;
 	fsl,wp-controller;
 };
 
diff --git a/Documentation/devicetree/bindings/spi/spi-ath79.txt b/Documentation/devicetree/bindings/spi/spi-ath79.txt
index f1ad9c3..9c696fa 100644
--- a/Documentation/devicetree/bindings/spi/spi-ath79.txt
+++ b/Documentation/devicetree/bindings/spi/spi-ath79.txt
@@ -3,7 +3,7 @@
 Required properties:
 - compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
 - reg: Base address and size of the controllers memory area
-- clocks: phandle to the AHB clock.
+- clocks: phandle of the AHB clock.
 - clock-names: has to be "ahb".
 - #address-cells: <1>, as required by generic SPI binding.
 - #size-cells: <0>, also as required by generic SPI binding.
@@ -12,9 +12,9 @@
 
 Example:
 
-	spi@1F000000 {
+	spi@1f000000 {
 		compatible = "qca,ar9132-spi", "qca,ar7100-spi";
-		reg = <0x1F000000 0x10>;
+		reg = <0x1f000000 0x10>;
 
 		clocks = <&pll 2>;
 		clock-names = "ahb";
diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904
index 014f112..57fffe3 100644
--- a/Documentation/hwmon/nct7904
+++ b/Documentation/hwmon/nct7904
@@ -35,11 +35,11 @@
 temp[2-9]_input		CPU temperatures (1/1000 degree,
 			0.125 degree resolution)
 
-fan[1-4]_mode		R/W, 0/1 for manual or SmartFan mode
+pwm[1-4]_enable		R/W, 1/2 for manual or SmartFan mode
 			Setting SmartFan mode is supported only if it has been
 			previously configured by BIOS (or configuration EEPROM)
 
-fan[1-4]_pwm		R/O in SmartFan mode, R/W in manual control mode
+pwm[1-4]		R/O in SmartFan mode, R/W in manual control mode
 
 The driver checks sensor control registers and does not export the sensors
 that are not enabled. Anyway, a sensor that is enabled may actually be not
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index e63b446..13f888a 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -952,6 +952,14 @@
 	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
 	mode) if this option is supported by $(AR).
 
+    ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS   Overrides the kbuild defaults
+
+	These variables are appended to the KBUILD_CPPFLAGS,
+	KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the
+	top-level Makefile has set any other flags. This provides a
+	means for an architecture to override the defaults.
+
+
 --- 6.2 Add prerequisites to archheaders:
 
 	The archheaders: rule is used to generate header files that
diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py
index 949de19..cda56df 100755
--- a/Documentation/target/tcm_mod_builder.py
+++ b/Documentation/target/tcm_mod_builder.py
@@ -199,7 +199,8 @@
 	buf += "#include <linux/string.h>\n"
 	buf += "#include <linux/configfs.h>\n"
 	buf += "#include <linux/ctype.h>\n"
-	buf += "#include <asm/unaligned.h>\n\n"
+	buf += "#include <asm/unaligned.h>\n"
+	buf += "#include <scsi/scsi_proto.h>\n\n"
 	buf += "#include <target/target_core_base.h>\n"
 	buf += "#include <target/target_core_fabric.h>\n"
 	buf += "#include <target/target_core_fabric_configfs.h>\n"
@@ -230,8 +231,14 @@
 	buf += "	}\n"
 	buf += "	tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n"
 	buf += "	tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n"
-	buf += "	ret = core_tpg_register(&" + fabric_mod_name + "_ops, wwn,\n"
-	buf += "				&tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+
+	if proto_ident == "FC":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);\n"
+	elif proto_ident == "SAS":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+	elif proto_ident == "iSCSI":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_ISCSI);\n"
+
 	buf += "	if (ret < 0) {\n"
 	buf += "		kfree(tpg);\n"
 	buf += "		return NULL;\n"
@@ -292,7 +299,7 @@
 
 	buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n"
 	buf += "	.module				= THIS_MODULE,\n"
-	buf += "	.name				= " + fabric_mod_name + ",\n"
+	buf += "	.name				= \"" + fabric_mod_name + "\",\n"
 	buf += "	.get_fabric_name		= " + fabric_mod_name + "_get_fabric_name,\n"
 	buf += "	.tpg_get_wwn			= " + fabric_mod_name + "_get_fabric_wwn,\n"
 	buf += "	.tpg_get_tag			= " + fabric_mod_name + "_get_tag,\n"
@@ -322,17 +329,17 @@
 	buf += "	.fabric_make_tpg		= " + fabric_mod_name + "_make_tpg,\n"
 	buf += "	.fabric_drop_tpg		= " + fabric_mod_name + "_drop_tpg,\n"
 	buf += "\n"
-	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs;\n"
+	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs,\n"
 	buf += "};\n\n"
 
 	buf += "static int __init " + fabric_mod_name + "_init(void)\n"
 	buf += "{\n"
-	buf += "	return target_register_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	return target_register_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "static void __exit " + fabric_mod_name + "_exit(void)\n"
 	buf += "{\n"
-	buf += "	target_unregister_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	target_unregister_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n"
diff --git a/MAINTAINERS b/MAINTAINERS
index fd60784..9289ecb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -361,11 +361,11 @@
 F:	drivers/input/touchscreen/ad7879.c
 
 ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 S:	Maintained
 
 ADM1025 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/adm1025
@@ -430,7 +430,7 @@
 F:	drivers/macintosh/therm_adt746x.c
 
 ADT7475 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/adt7475
@@ -445,7 +445,7 @@
 
 ADVANSYS SCSI DRIVER
 M:	Matthew Wilcox <matthew@wil.cx>
-M:	Hannes Reinecke <hare@suse.de>
+M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/advansys.txt
@@ -506,7 +506,7 @@
 F:	drivers/scsi/pcmcia/aha152x*
 
 AIC7XXX / AIC79XX SCSI DRIVER
-M:	Hannes Reinecke <hare@suse.de>
+M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aic7xxx/
@@ -746,7 +746,7 @@
 F:	sound/aoa/
 
 APM DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 S:	Odd fixes
 F:	arch/x86/kernel/apm_32.c
 F:	include/linux/apm_bios.h
@@ -1001,6 +1001,7 @@
 M:	Baruch Siach <baruch@tkos.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	arch/arm/boot/dts/cx92755*
 N:	digicolor
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -1324,7 +1325,7 @@
 F:	arch/arm/mach-pxa/palmtc.c
 
 ARM/PALM TREO SUPPORT
-M:	Tomas Cech <sleep_walker@suse.cz>
+M:	Tomas Cech <sleep_walker@suse.com>
 L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
@@ -2405,7 +2406,7 @@
 BTRFS FILE SYSTEM
 M:	Chris Mason <clm@fb.com>
 M:	Josef Bacik <jbacik@fb.com>
-M:	David Sterba <dsterba@suse.cz>
+M:	David Sterba <dsterba@suse.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
@@ -2748,7 +2749,7 @@
 M:	Julia Lawall <Julia.Lawall@lip6.fr>
 M:	Gilles Muller <Gilles.Muller@lip6.fr>
 M:	Nicolas Palix <nicolas.palix@imag.fr>
-M:	Michal Marek <mmarek@suse.cz>
+M:	Michal Marek <mmarek@suse.com>
 L:	cocci@systeme.lip6.fr (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
 W:	http://coccinelle.lip6.fr/
@@ -2864,7 +2865,7 @@
 
 CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
 M:	Johannes Weiner <hannes@cmpxchg.org>
-M:	Michal Hocko <mhocko@suse.cz>
+M:	Michal Hocko <mhocko@kernel.org>
 L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
@@ -2945,7 +2946,7 @@
 F:	arch/x86/kernel/msr.c
 
 CPU POWER MONITORING SUBSYSTEM
-M:	Thomas Renninger <trenn@suse.de>
+M:	Thomas Renninger <trenn@suse.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	tools/power/cpupower/
@@ -3175,7 +3176,7 @@
 F:	drivers/net/ethernet/dec/tulip/dmfe.c
 
 DC390/AM53C974 SCSI driver
-M:	Hannes Reinecke <hare@suse.de>
+M:	Hannes Reinecke <hare@suse.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/am53c974.c
@@ -3379,7 +3380,7 @@
 S:	Maintained
 
 DISKQUOTA
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 S:	Maintained
 F:	Documentation/filesystems/quota.txt
 F:	fs/quota/
@@ -3435,7 +3436,7 @@
 F:	drivers/hwmon/dme1737.c
 
 DMI/SMBIOS SUPPORT
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 S:	Maintained
 T:	quilt http://jdelvare.nerim.net/devel/linux/jdelvare-dmi/
 F:	Documentation/ABI/testing/sysfs-firmware-dmi-tables
@@ -4051,7 +4052,7 @@
 F:	drivers/of/of_net.c
 
 EXT2 FILE SYSTEM
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext2.txt
@@ -4059,7 +4060,7 @@
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	Andreas Dilger <adilger.kernel@dilger.ca>
 L:	linux-ext4@vger.kernel.org
@@ -4109,7 +4110,7 @@
 F:	include/video/exynos_mipi*
 
 F71805F HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/f71805f
@@ -4244,7 +4245,7 @@
 F:	drivers/block/rsxx/
 
 FLOPPY DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
 S:	Odd fixes
 F:	drivers/block/floppy.c
@@ -4665,7 +4666,7 @@
 
 H8/300 ARCHITECTURE
 M:	Yoshinori Sato <ysato@users.sourceforge.jp>
-L:	uclinux-h8-devel@lists.sourceforge.jp
+L:	uclinux-h8-devel@lists.sourceforge.jp (moderated for non-subscribers)
 W:	http://uclinux-h8.sourceforge.jp
 T:	git git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git
 S:	Maintained
@@ -4712,7 +4713,7 @@
 F:	drivers/media/usb/hackrf/
 
 HARDWARE MONITORING
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
@@ -4815,7 +4816,7 @@
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -4824,7 +4825,7 @@
 F:	include/uapi/linux/hid*
 
 HID SENSOR HUB DRIVERS
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 M:	Jonathan Cameron <jic23@kernel.org>
 M:	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
 L:	linux-input@vger.kernel.org
@@ -4958,7 +4959,7 @@
 F:	tools/hv/
 
 I2C OVER PARALLEL PORT
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-parport
@@ -4967,7 +4968,7 @@
 F:	drivers/i2c/busses/i2c-parport-light.c
 
 I2C/SMBUS CONTROLLER DRIVERS FOR PC
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ali1535
@@ -5008,7 +5009,7 @@
 F:	Documentation/i2c/busses/i2c-ismt
 
 I2C/SMBUS STUB DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-stub.c
@@ -5035,7 +5036,7 @@
 S:	Maintained
 
 I2C-TAOS-EVM DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-taos-evm
@@ -5564,8 +5565,8 @@
 F:	net/netfilter/ipvs/
 
 IPWIRELESS DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
-M:	David Sterba <dsterba@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
+M:	David Sterba <dsterba@suse.com>
 S:	Odd Fixes
 F:	drivers/tty/ipwireless/
 
@@ -5685,7 +5686,7 @@
 F:	drivers/isdn/hardware/eicon/
 
 IT87 HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/it87
@@ -5752,7 +5753,7 @@
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
 M:	Andrew Morton <akpm@linux-foundation.org>
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	fs/jbd/
@@ -5816,7 +5817,7 @@
 F:	fs/autofs4/
 
 KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
-M:	Michal Marek <mmarek@suse.cz>
+M:	Michal Marek <mmarek@suse.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git for-next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git rc-fixes
 L:	linux-kbuild@vger.kernel.org
@@ -5880,7 +5881,7 @@
 F:	arch/x86/kvm/svm.c
 
 KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-M:	Alexander Graf <agraf@suse.de>
+M:	Alexander Graf <agraf@suse.com>
 L:	kvm-ppc@vger.kernel.org
 W:	http://kvm.qumranet.com
 T:	git git://github.com/agraf/linux-2.6.git
@@ -5898,7 +5899,6 @@
 F:	Documentation/s390/kvm.txt
 F:	arch/s390/include/asm/kvm*
 F:	arch/s390/kvm/
-F:	drivers/s390/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR ARM
 M:	Christoffer Dall <christoffer.dall@linaro.org>
@@ -6037,7 +6037,7 @@
 F:	include/linux/leds.h
 
 LEGACY EEPROM DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 S:	Maintained
 F:	Documentation/misc-devices/eeprom
 F:	drivers/misc/eeprom/eeprom.c
@@ -6090,7 +6090,7 @@
 F:	include/linux/libata.h
 
 LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	linux-ide@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
 S:	Maintained
@@ -6251,8 +6251,8 @@
 LIVE PATCHING
 M:	Josh Poimboeuf <jpoimboe@redhat.com>
 M:	Seth Jennings <sjenning@redhat.com>
-M:	Jiri Kosina <jkosina@suse.cz>
-M:	Vojtech Pavlik <vojtech@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
+M:	Vojtech Pavlik <vojtech@suse.com>
 S:	Maintained
 F:	kernel/livepatch/
 F:	include/linux/livepatch.h
@@ -6278,21 +6278,21 @@
 F:	drivers/hwmon/lm73.c
 
 LM78 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm78
 F:	drivers/hwmon/lm78.c
 
 LM83 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm83
 F:	drivers/hwmon/lm83.c
 
 LM90 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm90
@@ -6838,6 +6838,12 @@
 S:	Maintained
 F:	drivers/media/usb/msi2500/
 
+MSYSTEMS DISKONCHIP G3 MTD DRIVER
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/devices/docg3*
+
 MT9M032 APTINA SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
@@ -7019,6 +7025,7 @@
 F:	net/*/netfilter.c
 F:	net/*/netfilter/
 F:	net/netfilter/
+F:	net/bridge/br_netfilter*.c
 
 NETLABEL
 M:	Paul Moore <paul@paul-moore.com>
@@ -7718,7 +7725,7 @@
 F:	drivers/char/pc8736x_gpio.c
 
 PC87427 HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/pc87427
@@ -7995,7 +8002,7 @@
 F:	drivers/pinctrl/samsung/
 
 PIN CONTROLLER - ST SPEAR
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -8003,7 +8010,7 @@
 F:	drivers/pinctrl/spear/
 
 PKTCDVD DRIVER
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
@@ -8894,7 +8901,7 @@
 F:	drivers/tty/serial/
 
 SYNOPSYS DESIGNWARE DMAC DRIVER
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 S:	Maintained
 F:	include/linux/dma/dw.h
@@ -9061,7 +9068,7 @@
 F:	drivers/mmc/host/sdhci-s3c*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
@@ -9423,7 +9430,7 @@
 F:	drivers/hwmon/sch5627.c
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397
@@ -9472,7 +9479,7 @@
 F:	drivers/media/pci/solo6x10/
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-M:	Neil Brown <neilb@suse.de>
+M:	Neil Brown <neilb@suse.com>
 L:	linux-raid@vger.kernel.org
 S:	Supported
 F:	drivers/md/
@@ -9515,7 +9522,7 @@
 
 SOUND
 M:	Jaroslav Kysela <perex@perex.cz>
-M:	Takashi Iwai <tiwai@suse.de>
+M:	Takashi Iwai <tiwai@suse.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://www.alsa-project.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
@@ -9599,7 +9606,7 @@
 F:	include/linux/compiler.h
 
 SPEAR PLATFORM SUPPORT
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 M:	Shiraz Hashim <shiraz.linux.kernel@gmail.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -9608,7 +9615,7 @@
 F:	arch/arm/mach-spear/
 
 SPEAR CLOCK FRAMEWORK SUPPORT
-M:	Viresh Kumar <viresh.linux@gmail.com>
+M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -10398,7 +10405,7 @@
 
 TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-M:	Jiri Slaby <jslaby@suse.cz>
+M:	Jiri Slaby <jslaby@suse.com>
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
 F:	Documentation/serial/
@@ -10472,7 +10479,7 @@
 F:	arch/m68k/include/asm/*_no.*
 
 UDF FILESYSTEM
-M:	Jan Kara <jack@suse.cz>
+M:	Jan Kara <jack@suse.com>
 S:	Maintained
 F:	Documentation/filesystems/udf.txt
 F:	fs/udf/
@@ -10615,7 +10622,7 @@
 F:	include/linux/usb/gadget*
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-M:	Jiri Kosina <jkosina@suse.cz>
+M:	Jiri Kosina <jkosina@suse.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -10740,7 +10747,7 @@
 F:	drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-M:	Oliver Neukum <oneukum@suse.de>
+M:	Oliver Neukum <oneukum@suse.com>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
@@ -10894,6 +10901,15 @@
 F:	include/linux/virtio_*.h
 F:	include/uapi/linux/virtio_*.h
 
+VIRTIO DRIVERS FOR S390
+M:	Christian Borntraeger <borntraeger@de.ibm.com>
+M:	Cornelia Huck <cornelia.huck@de.ibm.com>
+L:	linux-s390@vger.kernel.org
+L:	virtualization@lists.linux-foundation.org
+L:	kvm@vger.kernel.org
+S:	Supported
+F:	drivers/s390/virtio/
+
 VIRTIO GPU DRIVER
 M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>
@@ -11067,7 +11083,7 @@
 F:	drivers/hwmon/w83793.c
 
 W83795 HARDWARE MONITORING DRIVER
-M:	Jean Delvare <jdelvare@suse.de>
+M:	Jean Delvare <jdelvare@suse.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/w83795.c
diff --git a/Makefile b/Makefile
index 257ef58..afabc44 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*
@@ -780,10 +780,11 @@
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 
-# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
-KBUILD_CPPFLAGS += $(KCPPFLAGS)
-KBUILD_AFLAGS += $(KAFLAGS)
-KBUILD_CFLAGS += $(KCFLAGS)
+# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
+# last assignments
+KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
+KBUILD_AFLAGS   += $(ARCH_AFLAGS)   $(KAFLAGS)
+KBUILD_CFLAGS   += $(ARCH_CFLAGS)   $(KCFLAGS)
 
 # Use --build-id when available.
 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
diff --git a/arch/Kconfig b/arch/Kconfig
index bec6666..8a8ea71 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -221,6 +221,10 @@
 config ARCH_THREAD_INFO_ALLOCATOR
 	bool
 
+# Select if arch wants to size task_struct dynamically via arch_task_struct_size:
+config ARCH_WANTS_DYNAMIC_TASK_STRUCT
+	bool
+
 config HAVE_REGS_AND_STACK_ACCESS_API
 	bool
 	help
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index cde23cd..ffd9cf5 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -5,6 +5,7 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += sections.h
 generic-y += trace_clock.h
diff --git a/arch/alpha/include/asm/mm-arch-hooks.h b/arch/alpha/include/asm/mm-arch-hooks.h
deleted file mode 100644
index b07fd86..0000000
--- a/arch/alpha/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ALPHA_MM_ARCH_HOOKS_H
-#define _ASM_ALPHA_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ALPHA_MM_ARCH_HOOKS_H */
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index e7cee0a..91cf405 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -115,6 +115,7 @@
 
 config ARC_CPU_750D
 	bool "ARC750D"
+	select ARC_CANT_LLSC
 	help
 	  Support for ARC750 core
 
@@ -362,7 +363,7 @@
 config ARC_HAS_LLSC
 	bool "Insn: LLOCK/SCOND (efficient atomic ops)"
 	default y
-	depends on !ARC_CPU_750D && !ARC_CANT_LLSC
+	depends on !ARC_CANT_LLSC
 
 config ARC_HAS_SWAPE
 	bool "Insn: SWAPE (endian-swap)"
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 6107062..46d8731 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -49,7 +49,8 @@
 
 ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 # Generic build system uses -O2, we want -O3
-cflags-y  += -O3
+# Note: No need to add to cflags-y as that happens anyways
+ARCH_CFLAGS += -O3
 endif
 
 # small data is default for elf32 tool-chain. If not usable, disable it
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index 15c8d62..1cd5e82 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -12,7 +12,7 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <75000000>;
+	clock-frequency = <90000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 199d428..2f0b332 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -12,7 +12,7 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <75000000>;
+	clock-frequency = <90000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index 1a80cc9..7611b10 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -22,6 +22,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += param.h
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 99fe118..57c1f33 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -50,8 +50,7 @@
 	 * done for const @nr, but no code is generated due to gcc	\
 	 * const prop.							\
 	 */								\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
+	nr &= 0x1f;							\
 									\
 	__asm__ __volatile__(						\
 	"1:	llock       %0, [%1]		\n"			\
@@ -82,8 +81,7 @@
 									\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
+	nr &= 0x1f;							\
 									\
 	/*								\
 	 * Explicit full memory barrier needed before/after as		\
@@ -129,16 +127,13 @@
 	unsigned long temp, flags;					\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	/*								\
 	 * spin lock/unlock provide the needed smp_mb() before/after	\
 	 */								\
 	bitops_lock(flags);						\
 									\
 	temp = *m;							\
-	*m = temp c_op (1UL << nr);					\
+	*m = temp c_op (1UL << (nr & 0x1f));					\
 									\
 	bitops_unlock(flags);						\
 }
@@ -149,17 +144,14 @@
 	unsigned long old, flags;					\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	bitops_lock(flags);						\
 									\
 	old = *m;							\
-	*m = old c_op (1 << nr);					\
+	*m = old c_op (1UL << (nr & 0x1f));				\
 									\
 	bitops_unlock(flags);						\
 									\
-	return (old & (1 << nr)) != 0;					\
+	return (old & (1UL << (nr & 0x1f))) != 0;			\
 }
 
 #endif /* CONFIG_ARC_HAS_LLSC */
@@ -174,11 +166,8 @@
 	unsigned long temp;						\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	temp = *m;							\
-	*m = temp c_op (1UL << nr);					\
+	*m = temp c_op (1UL << (nr & 0x1f));				\
 }
 
 #define __TEST_N_BIT_OP(op, c_op, asm_op)				\
@@ -187,13 +176,10 @@
 	unsigned long old;						\
 	m += nr >> 5;							\
 									\
-	if (__builtin_constant_p(nr))					\
-		nr &= 0x1f;						\
-									\
 	old = *m;							\
-	*m = old c_op (1 << nr);					\
+	*m = old c_op (1UL << (nr & 0x1f));				\
 									\
-	return (old & (1 << nr)) != 0;					\
+	return (old & (1UL << (nr & 0x1f))) != 0;			\
 }
 
 #define BIT_OPS(op, c_op, asm_op)					\
@@ -224,10 +210,7 @@
 
 	addr += nr >> 5;
 
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	mask = 1 << nr;
+	mask = 1UL << (nr & 0x1f);
 
 	return ((mask & *addr) != 0);
 }
diff --git a/arch/arc/include/asm/futex.h b/arch/arc/include/asm/futex.h
index 05b5aaf..70cfe16 100644
--- a/arch/arc/include/asm/futex.h
+++ b/arch/arc/include/asm/futex.h
@@ -16,12 +16,15 @@
 #include <linux/uaccess.h>
 #include <asm/errno.h>
 
+#ifdef CONFIG_ARC_HAS_LLSC
+
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
 							\
 	__asm__ __volatile__(				\
-	"1:	ld  %1, [%2]			\n"	\
+	"1:	llock	%1, [%2]		\n"	\
 		insn				"\n"	\
-	"2:	st  %0, [%2]			\n"	\
+	"2:	scond	%0, [%2]		\n"	\
+	"	bnz	1b			\n"	\
 	"	mov %0, 0			\n"	\
 	"3:					\n"	\
 	"	.section .fixup,\"ax\"		\n"	\
@@ -39,6 +42,33 @@
 	: "r" (uaddr), "r" (oparg), "ir" (-EFAULT)	\
 	: "cc", "memory")
 
+#else	/* !CONFIG_ARC_HAS_LLSC */
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
+							\
+	__asm__ __volatile__(				\
+	"1:	ld	%1, [%2]		\n"	\
+		insn				"\n"	\
+	"2:	st	%0, [%2]		\n"	\
+	"	mov %0, 0			\n"	\
+	"3:					\n"	\
+	"	.section .fixup,\"ax\"		\n"	\
+	"	.align  4			\n"	\
+	"4:	mov %0, %4			\n"	\
+	"	b   3b				\n"	\
+	"	.previous			\n"	\
+	"	.section __ex_table,\"a\"	\n"	\
+	"	.align  4			\n"	\
+	"	.word   1b, 4b			\n"	\
+	"	.word   2b, 4b			\n"	\
+	"	.previous			\n"	\
+							\
+	: "=&r" (ret), "=&r" (oldval)			\
+	: "r" (uaddr), "r" (oparg), "ir" (-EFAULT)	\
+	: "cc", "memory")
+
+#endif
+
 static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
 {
 	int op = (encoded_op >> 28) & 7;
@@ -123,11 +153,17 @@
 
 	pagefault_disable();
 
-	/* TBD : can use llock/scond */
 	__asm__ __volatile__(
-	"1:	ld    %0, [%3]	\n"
-	"	brne  %0, %1, 3f	\n"
-	"2:	st    %2, [%3]	\n"
+#ifdef CONFIG_ARC_HAS_LLSC
+	"1:	llock	%0, [%3]		\n"
+	"	brne	%0, %1, 3f		\n"
+	"2:	scond	%2, [%3]		\n"
+	"	bnz	1b			\n"
+#else
+	"1:	ld	%0, [%3]		\n"
+	"	brne	%0, %1, 3f		\n"
+	"2:	st	%2, [%3]		\n"
+#endif
 	"3:	\n"
 	"	.section .fixup,\"ax\"	\n"
 	"4:	mov %0, %4	\n"
diff --git a/arch/arc/include/asm/mm-arch-hooks.h b/arch/arc/include/asm/mm-arch-hooks.h
deleted file mode 100644
index c37541c..0000000
--- a/arch/arc/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARC_MM_ARCH_HOOKS_H
-#define _ASM_ARC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ARC_MM_ARCH_HOOKS_H */
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
index 9175597..91694ec 100644
--- a/arch/arc/include/asm/ptrace.h
+++ b/arch/arc/include/asm/ptrace.h
@@ -106,7 +106,7 @@
 	long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
-#define instruction_pointer(regs)	((regs)->ret)
+#define instruction_pointer(regs)	(unsigned long)((regs)->ret)
 #define profile_pc(regs)		instruction_pointer(regs)
 
 /* return 1 if user mode or 0 if kernel mode */
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 6208c63..26c1568 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -12,7 +12,6 @@
 #include <linux/of.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip.h>
-#include "../../drivers/irqchip/irqchip.h"
 #include <asm/irq.h>
 
 /*
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index fcdddb6..039fac3 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -12,7 +12,6 @@
 #include <linux/of.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip.h>
-#include "../../drivers/irqchip/irqchip.h"
 #include <asm/irq.h>
 
 /*
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index 30284e8..2fb8658 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -175,7 +175,6 @@
 #include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include "../../drivers/irqchip/irqchip.h"
 
 /*
  * Set the DEST for @cmn_irq to @cpu_mask (1 bit per core)
@@ -218,11 +217,28 @@
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 }
 
+#ifdef CONFIG_SMP
 static int
-idu_irq_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool f)
+idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
+		     bool force)
 {
+	unsigned long flags;
+	cpumask_t online;
+
+	/* errout if no online cpu per @cpumask */
+	if (!cpumask_and(&online, cpumask, cpu_online_mask))
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	idu_set_dest(data->hwirq, cpumask_bits(&online)[0]);
+	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+
 	return IRQ_SET_MASK_OK;
 }
+#endif
 
 static struct irq_chip idu_irq_chip = {
 	.name			= "MCIP IDU Intc",
@@ -330,8 +346,7 @@
 		if (!i)
 			idu_first_irq = irq;
 
-		irq_set_handler_data(irq, domain);
-		irq_set_chained_handler(irq, idu_cascade_isr);
+		irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
 	}
 
 	__mcip_cmd(CMD_IDU_ENABLE, 0);
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index a3d1862..18cc015 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -142,17 +142,22 @@
 }
 
 static const struct cpuinfo_data arc_cpu_tbl[] = {
+#ifdef CONFIG_ISA_ARCOMPACT
 	{ {0x20, "ARC 600"      }, 0x2F},
 	{ {0x30, "ARC 700"      }, 0x33},
 	{ {0x34, "ARC 700 R4.10"}, 0x34},
 	{ {0x35, "ARC 700 R4.11"}, 0x35},
-	{ {0x50, "ARC HS38"	}, 0x51},
+#else
+	{ {0x50, "ARC HS38 R2.0"}, 0x51},
+	{ {0x52, "ARC HS38 R2.1"}, 0x52},
+#endif
 	{ {0x00, NULL		} }
 };
 
-#define IS_AVAIL1(v, str)	((v) ? str : "")
-#define IS_USED(cfg)		(IS_ENABLED(cfg) ? "" : "(not used) ")
-#define IS_AVAIL2(v, str, cfg)  IS_AVAIL1(v, str), IS_AVAIL1(v, IS_USED(cfg))
+#define IS_AVAIL1(v, s)		((v) ? s : "")
+#define IS_USED_RUN(v)		((v) ? "" : "(not used) ")
+#define IS_USED_CFG(cfg)	IS_USED_RUN(IS_ENABLED(cfg))
+#define IS_AVAIL2(v, s, cfg)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
 
 static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 {
@@ -226,7 +231,7 @@
 			n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
 		}
 		n += scnprintf(buf + n, len - n, "%s",
-			       IS_USED(CONFIG_ARC_HAS_HW_MPY));
+			       IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
 	}
 
 	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
index 807f7d6..a6f91e8 100644
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@@ -58,7 +58,6 @@
 
 static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
 {
-	struct path path;
 	char *path_nm = NULL;
 	struct mm_struct *mm;
 	struct file *exe_file;
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index b29d62e..1cd6695 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -468,10 +468,18 @@
 noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
 {
 #ifdef CONFIG_ISA_ARCV2
+	/*
+	 * SLC is shared between all cores and concurrent aux operations from
+	 * multiple cores need to be serialized using a spinlock
+	 * A concurrent operation can be silently ignored and/or the old/new
+	 * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop
+	 * below)
+	 */
+	static DEFINE_SPINLOCK(lock);
 	unsigned long flags;
 	unsigned int ctrl;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&lock, flags);
 
 	/*
 	 * The Region Flush operation is specified by CTRL.RGN_OP[11..9]
@@ -504,7 +512,7 @@
 
 	while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
 
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&lock, flags);
 #endif
 }
 
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 74a637a..57706a9 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -60,8 +60,8 @@
 
 	/* This is kernel Virtual address (0x7000_0000 based) */
 	kvaddr = ioremap_nocache((unsigned long)paddr, size);
-	if (kvaddr != NULL)
-		memset(kvaddr, 0, size);
+	if (kvaddr == NULL)
+		return NULL;
 
 	/* This is bus address, platform dependent */
 	*dma_handle = (dma_addr_t)paddr;
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 0d35ab6..7106114 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -74,6 +74,7 @@
 	audio_codec: tlv320aic3106@1b {
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
+		ai3x-micbias-vg = <0x2>;
 	};
 
 	accel: lis331dlh@1d {
@@ -153,7 +154,7 @@
 	ti,audio-routing =
 		"Headphone Jack",	"HPLOUT",
 		"Headphone Jack",	"HPROUT",
-		"LINE1L",		"Line In";
+		"MIC3L",		"Mic3L Switch";
 };
 
 &mcasp0 {
@@ -438,41 +439,50 @@
 	regulators {
 		dcdc1_reg: regulator@0 {
 			/* VDD_1V8 system supply */
+			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
 			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
+			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		dcdc3_reg: regulator@2 {
 			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
+			regulator-max-microvolt = <1325000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		ldo1_reg: regulator@3 {
 			/* VRTC 1.8V always-on supply */
+			regulator-name = "vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
 			/* 3.3V rail */
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
 			/* VDD_3V3A 3.3V rail */
+			regulator-name = "vdd_3v3a";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 		};
 
 		ldo4_reg: regulator@6 {
 			/* VDD_3V3B 3.3V rail */
+			regulator-name = "vdd_3v3b";
+			regulator-always-on;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index 9c7fb0a..4e42f30c 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -22,6 +22,7 @@
 			MATRIX_KEY(0x00, 0x02, KEY_F1)
 			MATRIX_KEY(0x00, 0x03, KEY_B)
 			MATRIX_KEY(0x00, 0x04, KEY_F10)
+			MATRIX_KEY(0x00, 0x05, KEY_RO)
 			MATRIX_KEY(0x00, 0x06, KEY_N)
 			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
 			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
@@ -34,6 +35,7 @@
 			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
 			MATRIX_KEY(0x01, 0x09, KEY_F9)
 			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+			MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
 
 			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
 			MATRIX_KEY(0x02, 0x01, KEY_TAB)
@@ -45,6 +47,7 @@
 			MATRIX_KEY(0x02, 0x07, KEY_102ND)
 			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
 			MATRIX_KEY(0x02, 0x09, KEY_F8)
+			MATRIX_KEY(0x02, 0x0a, KEY_YEN)
 
 			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
 			MATRIX_KEY(0x03, 0x02, KEY_F2)
@@ -53,6 +56,7 @@
 			MATRIX_KEY(0x03, 0x06, KEY_6)
 			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
 			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
 
 			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
 			MATRIX_KEY(0x04, 0x01, KEY_A)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index aa46590..096f68b 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -686,7 +686,8 @@
 
 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4e1b605..80373841 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -587,9 +587,10 @@
 
 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };
 
 &qspi {
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index c892d58..b995333 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -468,6 +468,7 @@
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
 				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
 			};
 
 			spdif@80054000 {
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index dd45e69..9351296 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -10,6 +10,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "imx25.dtsi"
 
@@ -114,8 +115,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 1 0>;
-	wp-gpios = <&gpio2 0 0>;
+	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index bc215e4..b69be5c 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -108,7 +108,7 @@
 			};
 
 			gpt1: timer@10003000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10003000 0x1000>;
 				interrupts = <26>;
 				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
@@ -117,7 +117,7 @@
 			};
 
 			gpt2: timer@10004000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10004000 0x1000>;
 				interrupts = <25>;
 				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
@@ -126,7 +126,7 @@
 			};
 
 			gpt3: timer@10005000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10005000 0x1000>;
 				interrupts = <24>;
 				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
@@ -376,7 +376,7 @@
 			};
 
 			gpt4: timer@10019000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10019000 0x1000>;
 				interrupts = <4>;
 				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
@@ -385,7 +385,7 @@
 			};
 
 			gpt5: timer@1001a000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001a000 0x1000>;
 				interrupts = <3>;
 				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
@@ -436,7 +436,7 @@
 			};
 
 			gpt6: timer@1001f000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001f000 0x1000>;
 				interrupts = <2>;
 				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 93d3ea1..0f3fe29 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -98,7 +98,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index e9337ad..3bc1883 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -103,8 +103,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index d0e0f57..53f4088 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -124,8 +124,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 181ae5e..b0d5542 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -147,8 +147,8 @@
 &esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 0>;
-	wp-gpios = <&gpio3 12 0>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 	status = "okay";
 };
@@ -295,9 +295,10 @@
 &tve {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
 	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 1d32557..fc89ce1 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -41,8 +41,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 0>;
-	wp-gpios = <&gpio4 11 0>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 4f1f0e2..e03373a 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -41,8 +41,8 @@
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 0>;
-	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 704bd72..d3e50b2 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -183,7 +183,7 @@
 };
 
 &esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
@@ -191,7 +191,7 @@
 };
 
 &esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
index c17d3ad..fc51b87 100644
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -119,8 +119,8 @@
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 0>;
-	wp-gpios = <&gpio2 19 0>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 43cb3fd..5111f51 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -305,8 +305,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -314,8 +314,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 78df05e..d6515f7 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -196,8 +197,8 @@
 };
 
 &usdhc3 {
-	cd-gpios = <&gpio6 11 0>;
-	wp-gpios = <&gpio6 14 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 703539c..00bd63e 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -161,7 +162,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index a43abfa..5645d52 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -251,7 +251,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -260,7 +260,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e6d9195..f4d6ae5 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -173,7 +173,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -181,7 +181,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 1d85de2..a47a039 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -392,7 +392,7 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -400,7 +400,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	no-1-8-v;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 59e5d15..ff41f83 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -258,6 +258,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 2c253d6..45e7c39 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -181,7 +183,7 @@
 &usdhc2 { /* module slot */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b5756c2..4493f6e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -318,7 +318,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 86f03c1..a857d12 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -324,7 +324,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4a8d97f..1afe338 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -417,7 +417,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 62a82f3..6dd0b76 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -299,6 +299,6 @@
 		&pinctrl_hummingboard_usdhc2
 	>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 3af16df..d7fe667 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -453,7 +453,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -461,7 +461,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1ce6133..9e6ecd9 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -409,8 +409,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	status = "disabled";
 };
 
@@ -418,7 +418,7 @@
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
-        cd-gpios = <&gpio1 27 0>;
-        wp-gpios = <&gpio1 29 0>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
         status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 488a640..3373fd9 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -342,7 +342,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -351,6 +351,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 3b24b126..e329ca5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -467,8 +467,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 0>;
-	wp-gpios = <&gpio1 13 0>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index e00c44f..7823793 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -448,8 +448,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -457,7 +457,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a626e6d..944eb81 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -562,8 +562,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 2 0>;
-	wp-gpios = <&gpio2 3 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -571,8 +571,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 0 0>;
-	wp-gpios = <&gpio2 1 0>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f02b80b..da08de3 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -680,7 +680,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 2 0>;
+	cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };
@@ -690,7 +690,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	no-1-8-v;
-	cd-gpios = <&gpio7 3 0>;
+	cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 5fb0916..9e096d8 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -9,6 +9,8 @@
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -250,13 +252,13 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio3 9 0>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 945887d..b84dff2 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -617,8 +617,8 @@
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio4 7 0>;
-	wp-gpios = <&gpio4 6 0>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -627,8 +627,8 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio5 0 0>;
-	wp-gpios = <&gpio4 29 0>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -637,6 +637,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 0>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index e3c0b63..115f3fd 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -49,7 +49,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -61,7 +61,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
-	cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
 	enable-sdio-wakup;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index cef04ce..ac88c34 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -293,7 +293,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
@@ -304,7 +304,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 4d1a4b9..fdd1d7c 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -234,8 +234,8 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 0>;
-	wp-gpios = <&gpio5 1 0>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 	enable-sdio-wakeup;
 	keep-power-in-suspend;
 	status = "okay";
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 50e555e..1b6494f 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -86,7 +86,7 @@
 			gpio,syscon-dev = <&devctrl 0x240>;
 		};
 
-		pcie@21020000 {
+		pcie1: pcie@21020000 {
 			compatible = "ti,keystone-pcie","snps,dw-pcie";
 			clocks = <&clkpcie1>;
 			clock-names = "pcie";
@@ -96,6 +96,7 @@
 			ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
 				0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
 
+			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
 
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index c06542b..e7a6f6d 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -286,7 +286,7 @@
 			ti,syscon-dev = <&devctrl 0x2a0>;
 		};
 
-		pcie@21800000 {
+		pcie0: pcie@21800000 {
 			compatible = "ti,keystone-pcie", "snps,dw-pcie";
 			clocks = <&clkpcie>;
 			clock-names = "pcie";
@@ -296,6 +296,7 @@
 			ranges = <0x81000000 0 0 0x23250000 0 0x4000
 				0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
 
+			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
 
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 233c69e..df8908a 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -120,7 +120,7 @@
 
 	lcd0: display@0 {
 		compatible = "lgphilips,lb035q02";
-		label = "lcd";
+		label = "lcd35";
 
 		reg = <1>;					/* CS1 */
 		spi-max-frequency = <10000000>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index f5395b7..048fd21 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -98,7 +98,7 @@
 
 	lcd0: display@0 {
 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
-		label = "lcd";
+		label = "lcd43";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&lte430_pins>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index f884d6a..7d31c6f 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -551,6 +551,7 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
@@ -558,6 +559,7 @@
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7d24ae0..c8fd648 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -612,6 +612,7 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
@@ -619,6 +620,7 @@
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 71468a7..5e17fd1 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -60,6 +60,22 @@
 	rxc-skew-ps = <2000>;
 };
 
+&gpio2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accel1: accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
@@ -68,19 +84,3 @@
 &usb1 {
 	status = "okay";
 };
-
-&gpio2 {
-	status = "okay";
-};
-
-&i2c1{
-	status = "okay";
-
-	accel1: accel1@53{
-		compatible = "adxl34x";
-		reg = <0x53>;
-
-		interrupt-parent = < &portc >;
-		interrupts = <3 2>;
-	};
-};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index d42c84b..e488572 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 9d34292..54bc6d3 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1310 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index b23e05e..c611f56 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1340 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index 13e1aa3..df2232d 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1340 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 40accc8..14594ce 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr13xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index 5de1431..e859e82 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index f79b3df..f4e92e5 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index b096329..070f2c1 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index 9537208..da210b4 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index fdedbb51..1b10344 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index ffea342..22be6e5 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index f0e3fcf..118135d 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr3xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
index 32dd55e..6eaaf63 100644
--- a/arch/arm/boot/dts/ste-ccu8540.dts
+++ b/arch/arm/boot/dts/ste-ccu8540.dts
@@ -17,6 +17,13 @@
 	model = "ST-Ericsson U8540 platform with Device Tree";
 	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index 651c56d..c8b8158 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -16,6 +16,13 @@
 	model = "ST-Ericsson CCU9540 platform with Device Tree";
 	compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 853684a..a75f328 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -971,7 +971,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		uart@80120000 {
+		ux500_serial0: uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -986,7 +986,7 @@
 			status = "disabled";
 		};
 
-		uart@80121000 {
+		ux500_serial1: uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
 			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -1001,7 +1001,7 @@
 			status = "disabled";
 		};
 
-		uart@80007000 {
+		ux500_serial2: uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
 			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 744c1e3..6d8ce15 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -32,11 +32,11 @@
 			status = "okay";
 		};
 
+		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_default_mode>;
 			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
 		};
 
 		uart@80007000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
index 2b1cb5b..18e9795 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -17,6 +17,13 @@
 	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
index 59523f8..2473991 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -16,4 +16,11 @@
 / {
 	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 7f3975b..b0278f4 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -23,6 +23,11 @@
 	};
 
 	soc {
+		/* Enable UART1 on this board */
+		uart@80121000 {
+			status = "okay";
+		};
+
 		i2c@80004000 {
 			tps61052@33 {
 				compatible = "tps61052";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
index 8c6a2de..c2e1ba0 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -19,6 +19,13 @@
 	model = "ST-Ericsson HREF (v60+) and ST UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
index d53cccd..ebd8547 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -18,4 +18,11 @@
 / {
 	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index a4bc9e7..810cda7 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -43,15 +43,26 @@
 				  <&vaudio_hf_hrefv60_mode>,
 				  <&gbf_hrefv60_mode>,
 				  <&hdtv_hrefv60_mode>,
-				  <&touch_hrefv60_mode>;
+				  <&touch_hrefv60_mode>,
+				  <&gpios_hrefv60_mode>;
 
 			sdi0 {
-				/* SD card detect GPIO pin, extend default state */
 				sdi0_default_mode: sdi0_default {
+					/* SD card detect GPIO pin, extend default state */
 					default_hrefv60_cfg1 {
 						pins = "GPIO95_E8";
 						ste,config = <&gpio_in_pu>;
 					};
+					/* VMMCI level-shifter enable */
+					default_hrefv60_cfg2 {
+						pins = "GPIO169_D22";
+						ste,config = <&gpio_out_lo>;
+					};
+					/* VMMCI level-shifter voltage select */
+					default_hrefv60_cfg3 {
+						pins = "GPIO5_AG6";
+						ste,config = <&gpio_out_hi>;
+					};
 				};
 			};
 			ipgpio {
@@ -213,6 +224,16 @@
 					};
 				};
 			};
+			gpios {
+				/* Dangling GPIO pins */
+				gpios_hrefv60_mode: gpios_hrefv60 {
+					default_cfg1 {
+						/* Normally UART1 RXD, now dangling */
+						pins = "GPIO4_AH6";
+						ste,config = <&in_pu>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 9edadc3..32a5ccb 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -18,6 +18,13 @@
 	model = "Calao Systems Snowball platform with device tree";
 	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
 
+	/* This stablilizes the serial port enumeration */
+	aliases {
+		serial0 = &ux500_serial0;
+		serial1 = &ux500_serial1;
+		serial2 = &ux500_serial2;
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
@@ -223,11 +230,11 @@
 			status = "okay";
 		};
 
+		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_default_mode>;
 			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
 		};
 
 		uart@80007000 {
@@ -452,7 +459,21 @@
 						pins = "GPIO21_AB3"; /* DAT31DIR */
 						ste,config = <&out_hi>;
 					};
-
+					/* SD card detect GPIO pin, extend default state */
+					snowball_cfg2 {
+						pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+					/* VMMCI level-shifter enable */
+					snowball_cfg3 {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_out_lo>;
+					};
+					/* VMMCI level-shifter voltage select */
+					snowball_cfg4 {
+						pins = "GPIO228_AJ6";
+						ste,config = <&gpio_out_hi>;
+					};
 				};
 			};
 			ssp0 {
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 83c5019..30b3bc1 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -13,6 +13,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += msgbuf.h
 generic-y += param.h
 generic-y += parport.h
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 6f225ac..b7f6fb4 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -286,7 +286,7 @@
  */
 static inline phys_addr_t __virt_to_idmap(unsigned long x)
 {
-	if (arch_virt_to_idmap)
+	if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap)
 		return arch_virt_to_idmap(x);
 	else
 		return __virt_to_phys(x);
diff --git a/arch/arm/include/asm/mm-arch-hooks.h b/arch/arm/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 7056660..0000000
--- a/arch/arm/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARM_MM_ARCH_HOOKS_H
-#define _ASM_ARM_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ARM_MM_ARCH_HOOKS_H */
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 357f57e..54272e0 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -818,12 +818,13 @@
 			if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL))
 				break;
 
-		of_node_put(dn);
 		if (cpu >= nr_cpu_ids) {
 			pr_warn("Failed to find logical CPU for %s\n",
 				dn->name);
+			of_node_put(dn);
 			break;
 		}
+		of_node_put(dn);
 
 		irqs[i] = cpu;
 		cpumask_set_cpu(cpu, &pmu->supported_cpus);
diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c
index 1a4d232..3826935 100644
--- a/arch/arm/kernel/reboot.c
+++ b/arch/arm/kernel/reboot.c
@@ -50,7 +50,7 @@
 	flush_cache_all();
 
 	/* Switch to the identity mapping. */
-	phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+	phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset);
 	phys_reset((unsigned long)addr);
 
 	/* Should never get here. */
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 80bad29..8c4467f 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -291,8 +291,6 @@
 	}
 }
 
-#ifdef CONFIG_PM_GENERIC_DOMAINS
-
 static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
 {
 	int iso, iso2sw;
@@ -399,7 +397,6 @@
 static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 {
 	struct clk *clk;
-	bool is_off;
 	int i;
 
 	imx6q_pu_domain.reg = pu_reg;
@@ -416,18 +413,13 @@
 	}
 	imx6q_pu_domain.num_clks = i;
 
-	is_off = IS_ENABLED(CONFIG_PM);
-	if (is_off) {
-		_imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
-	} else {
-		/*
-		 * Enable power if compiled without CONFIG_PM in case the
-		 * bootloader disabled it.
-		 */
-		imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
-	}
+	/* Enable power always in case bootloader disabled it. */
+	imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
 
-	pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
+	if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
+		return 0;
+
+	pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
 	return of_genpd_add_provider_onecell(dev->of_node,
 					     &imx_gpc_onecell_data);
 
@@ -437,13 +429,6 @@
 	return -EINVAL;
 }
 
-#else
-static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
-{
-	return 0;
-}
-#endif /* CONFIG_PM_GENERIC_DOMAINS */
-
 static int imx_gpc_probe(struct platform_device *pdev)
 {
 	struct regulator *pu_reg;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ecc04ff..4a023e8 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -60,6 +60,7 @@
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
+	select HAVE_ARM_SCU
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index c092730..bf366b3 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -24,6 +24,7 @@
 #include <linux/ata_platform.h>
 #include <linux/serial_8250.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -144,6 +145,8 @@
 
 	capc7117_uarts_init();
 	capc7117_ide_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(CAPC7117,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index bb99f59..a17a91e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -13,6 +13,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/dm9000.h>
 #include <linux/leds.h>
@@ -466,6 +467,8 @@
 	cmx2xx_init_ac97();
 	cmx2xx_init_touchscreen();
 	cmx2xx_init_leds();
+
+	regulator_has_full_constraints();
 }
 
 static void __init cmx2xx_init_irq(void)
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 4d3588d..5851f4c 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -835,6 +835,8 @@
 	cm_x300_init_ac97();
 	cm_x300_init_wi2wi();
 	cm_x300_init_bl();
+
+	regulator_has_full_constraints();
 }
 
 static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 5f9d930..3503826 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -18,6 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
 #include <linux/ucb1400.h>
 
 #include <asm/mach/arch.h>
@@ -294,6 +295,8 @@
 		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
 				colibri_pxa270_baseboard);
 	}
+
+	regulator_has_full_constraints();
 }
 
 /* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 51531ec..9d7072b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1306,6 +1306,8 @@
 	em_x270_init_i2c();
 	em_x270_init_camera();
 	em_x270_userspace_consumers_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index c98511c..9b0eb02 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -26,6 +26,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/can/platform/mcp251x.h>
+#include <linux/regulator/machine.h>
 
 #include "generic.h"
 
@@ -185,6 +186,8 @@
 	mxm_8x10_mmc_init();
 
 	icontrol_can_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 872dcb2..066e3a2 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -26,6 +26,7 @@
 #include <linux/dm9000.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/pxa-i2c.h>
 
 #include <asm/types.h>
@@ -534,6 +535,8 @@
 
 	BCR_writew(trizeps_conxs_bcr);
 	board_backlight_power(1);
+
+	regulator_has_full_constraints();
 }
 
 static void __init trizeps4_map_io(void)
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index aa89488..54122a9 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -24,6 +24,7 @@
 #include <linux/dm9000.h>
 #include <linux/ucb1400.h>
 #include <linux/ata_platform.h>
+#include <linux/regulator/machine.h>
 #include <linux/regulator/max1586.h>
 #include <linux/i2c/pxa-i2c.h>
 
@@ -711,6 +712,8 @@
 	vpac270_ts_init();
 	vpac270_rtc_init();
 	vpac270_ide_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(VPAC270, "Voipac PXA270")
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index ac2ae5c..6158566f 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -868,6 +868,8 @@
 	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
 	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
 	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
+
+	regulator_has_full_constraints();
 }
 
 static struct map_desc zeus_io_desc[] __initdata = {
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index a99d90a..0664091 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2009-2012 ST Microelectronics
  * Rajeev Kumar <rajeev-dlh.kumar@st.com>
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h
index 92da0a8..7058720 100644
--- a/arch/arm/mach-spear/include/mach/irqs.h
+++ b/arch/arm/mach-spear/include/mach/irqs.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2009-2012 ST Microelectronics
  * Rajeev Kumar <rajeev-dlh.kumar@st.com>
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/include/mach/misc_regs.h b/arch/arm/mach-spear/include/mach/misc_regs.h
index 935639c..cfaf7c6 100644
--- a/arch/arm/mach-spear/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
  * Miscellaneous registers definitions for SPEAr3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
index f2d6a01..5ed841c 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2009,2012 ST Microelectronics
  * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/include/mach/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h
index 51b2dc9..8439b9c 100644
--- a/arch/arm/mach-spear/include/mach/uncompress.h
+++ b/arch/arm/mach-spear/include/mach/uncompress.h
@@ -4,7 +4,7 @@
  * Serial port stubs for kernel decompress status messages
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/pl080.c b/arch/arm/mach-spear/pl080.c
index cfa1199..b4529f3 100644
--- a/arch/arm/mach-spear/pl080.c
+++ b/arch/arm/mach-spear/pl080.c
@@ -4,7 +4,7 @@
  * DMAC pl080 definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/pl080.h b/arch/arm/mach-spear/pl080.h
index eb6590d..608dec6 100644
--- a/arch/arm/mach-spear/pl080.h
+++ b/arch/arm/mach-spear/pl080.h
@@ -4,7 +4,7 @@
  * DMAC pl080 definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/restart.c b/arch/arm/mach-spear/restart.c
index ce5e098c..b434215 100644
--- a/arch/arm/mach-spear/restart.c
+++ b/arch/arm/mach-spear/restart.c
@@ -4,7 +4,7 @@
  * SPEAr platform specific restart functions
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index d9ce4d8..cd5d375 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -4,7 +4,7 @@
  * SPEAr1310 machine source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 3f3c0f1..94594d5 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -4,7 +4,7 @@
  * SPEAr1340 machine source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 2e463a9..b7afce6 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -4,7 +4,7 @@
  * SPEAr13XX machines common source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c
index b52e48f..5b32edd 100644
--- a/arch/arm/mach-spear/spear300.c
+++ b/arch/arm/mach-spear/spear300.c
@@ -4,7 +4,7 @@
  * SPEAr300 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c
index ed2029d..86a44ac 100644
--- a/arch/arm/mach-spear/spear310.c
+++ b/arch/arm/mach-spear/spear310.c
@@ -4,7 +4,7 @@
  * SPEAr310 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c
index bf634b3..d45d751 100644
--- a/arch/arm/mach-spear/spear320.c
+++ b/arch/arm/mach-spear/spear320.c
@@ -4,7 +4,7 @@
  * SPEAr320 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
index bf3b1fd..23394ac 100644
--- a/arch/arm/mach-spear/spear3xx.c
+++ b/arch/arm/mach-spear/spear3xx.c
@@ -4,7 +4,7 @@
  * SPEAr3XX machines common source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 1ced8a0..cba12f3 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1971,7 +1971,7 @@
 {
 	int next_bitmap;
 
-	if (mapping->nr_bitmaps > mapping->extensions)
+	if (mapping->nr_bitmaps >= mapping->extensions)
 		return -EINVAL;
 
 	next_bitmap = mapping->nr_bitmaps;
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 0716bbe..de2b246 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -274,7 +274,10 @@
 __v7_b15mp_setup:
 __v7_ca17mp_setup:
 	mov	r10, #0
-1:
+1:	adr	r12, __v7_setup_stack		@ the local stack
+	stmia	r12, {r0-r5, lr}		@ v7_invalidate_l1 touches r0-r6
+	bl      v7_invalidate_l1
+	ldmia	r12, {r0-r5, lr}
 #ifdef CONFIG_SMP
 	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)
 	ALT_UP(mov	r0, #(1 << 6))		@ fake it for UP
@@ -283,7 +286,7 @@
 	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
 	mcreq	p15, 0, r0, c1, c0, 1
 #endif
-	b	__v7_setup
+	b	__v7_setup_cont
 
 /*
  * Errata:
@@ -413,10 +416,11 @@
 
 __v7_setup:
 	adr	r12, __v7_setup_stack		@ the local stack
-	stmia	r12, {r0-r5, r7, r9, r11, lr}
+	stmia	r12, {r0-r5, lr}		@ v7_invalidate_l1 touches r0-r6
 	bl      v7_invalidate_l1
-	ldmia	r12, {r0-r5, r7, r9, r11, lr}
+	ldmia	r12, {r0-r5, lr}
 
+__v7_setup_cont:
 	and	r0, r9, #0xff000000		@ ARM?
 	teq	r0, #0x41000000
 	bne	__errata_finish
@@ -480,7 +484,7 @@
 
 	.align	2
 __v7_setup_stack:
-	.space	4 * 11				@ 11 registers
+	.space	4 * 7				@ 12 registers
 
 	__INITDATA
 
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 4550d24..c011e22 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -74,32 +74,52 @@
 
 int bpf_jit_enable __read_mostly;
 
-static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset)
+static inline int call_neg_helper(struct sk_buff *skb, int offset, void *ret,
+		      unsigned int size)
+{
+	void *ptr = bpf_internal_load_pointer_neg_helper(skb, offset, size);
+
+	if (!ptr)
+		return -EFAULT;
+	memcpy(ret, ptr, size);
+	return 0;
+}
+
+static u64 jit_get_skb_b(struct sk_buff *skb, int offset)
 {
 	u8 ret;
 	int err;
 
-	err = skb_copy_bits(skb, offset, &ret, 1);
+	if (offset < 0)
+		err = call_neg_helper(skb, offset, &ret, 1);
+	else
+		err = skb_copy_bits(skb, offset, &ret, 1);
 
 	return (u64)err << 32 | ret;
 }
 
-static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset)
+static u64 jit_get_skb_h(struct sk_buff *skb, int offset)
 {
 	u16 ret;
 	int err;
 
-	err = skb_copy_bits(skb, offset, &ret, 2);
+	if (offset < 0)
+		err = call_neg_helper(skb, offset, &ret, 2);
+	else
+		err = skb_copy_bits(skb, offset, &ret, 2);
 
 	return (u64)err << 32 | ntohs(ret);
 }
 
-static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset)
+static u64 jit_get_skb_w(struct sk_buff *skb, int offset)
 {
 	u32 ret;
 	int err;
 
-	err = skb_copy_bits(skb, offset, &ret, 4);
+	if (offset < 0)
+		err = call_neg_helper(skb, offset, &ret, 4);
+	else
+		err = skb_copy_bits(skb, offset, &ret, 4);
 
 	return (u64)err << 32 | ntohl(ret);
 }
@@ -536,9 +556,6 @@
 		case BPF_LD | BPF_B | BPF_ABS:
 			load_order = 0;
 load:
-			/* the interpreter will deal with the negative K */
-			if ((int)k < 0)
-				return -ENOTSUPP;
 			emit_mov_i(r_off, k, ctx);
 load_common:
 			ctx->seen |= SEEN_DATA | SEEN_CALL;
@@ -547,12 +564,24 @@
 				emit(ARM_SUB_I(r_scratch, r_skb_hl,
 					       1 << load_order), ctx);
 				emit(ARM_CMP_R(r_scratch, r_off), ctx);
-				condt = ARM_COND_HS;
+				condt = ARM_COND_GE;
 			} else {
 				emit(ARM_CMP_R(r_skb_hl, r_off), ctx);
 				condt = ARM_COND_HI;
 			}
 
+			/*
+			 * test for negative offset, only if we are
+			 * currently scheduled to take the fast
+			 * path. this will update the flags so that
+			 * the slowpath instruction are ignored if the
+			 * offset is negative.
+			 *
+			 * for loard_order == 0 the HI condition will
+			 * make loads at offset 0 take the slow path too.
+			 */
+			_emit(condt, ARM_CMP_I(r_off, 0), ctx);
+
 			_emit(condt, ARM_ADD_R(r_scratch, r_off, r_skb_data),
 			      ctx);
 
@@ -860,9 +889,11 @@
 			off = offsetof(struct sk_buff, vlan_tci);
 			emit(ARM_LDRH_I(r_A, r_skb, off), ctx);
 			if (code == (BPF_ANC | SKF_AD_VLAN_TAG))
-				OP_IMM3(ARM_AND, r_A, r_A, VLAN_VID_MASK, ctx);
-			else
-				OP_IMM3(ARM_AND, r_A, r_A, VLAN_TAG_PRESENT, ctx);
+				OP_IMM3(ARM_AND, r_A, r_A, ~VLAN_TAG_PRESENT, ctx);
+			else {
+				OP_IMM3(ARM_LSR, r_A, r_A, 12, ctx);
+				OP_IMM3(ARM_AND, r_A, r_A, 0x1, ctx);
+			}
 			break;
 		case BPF_ANC | SKF_AD_QUEUE:
 			ctx->seen |= SEEN_SKB;
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index b112a39..70fd9ff 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -25,6 +25,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += msi.h
diff --git a/arch/arm64/include/asm/mm-arch-hooks.h b/arch/arm64/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 562b655..0000000
--- a/arch/arm64/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARM64_MM_ARCH_HOOKS_H
-#define _ASM_ARM64_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ARM64_MM_ARCH_HOOKS_H */
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
index 9d4aa18..e8ca6ea 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@@ -122,12 +122,12 @@
 
 	/* Show what we know for posterity */
 	c16 = early_memremap(efi_to_phys(efi.systab->fw_vendor),
-			     sizeof(vendor));
+			     sizeof(vendor) * sizeof(efi_char16_t));
 	if (c16) {
 		for (i = 0; i < (int) sizeof(vendor) - 1 && *c16; ++i)
 			vendor[i] = c16[i];
 		vendor[i] = '\0';
-		early_memunmap(c16, sizeof(vendor));
+		early_memunmap(c16, sizeof(vendor) * sizeof(efi_char16_t));
 	}
 
 	pr_info("EFI v%u.%.02u by %s\n",
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index f860bfd..e163518 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -585,7 +585,8 @@
  *
  */
 ENTRY(cpu_switch_to)
-	add	x8, x0, #THREAD_CPU_CONTEXT
+	mov	x10, #THREAD_CPU_CONTEXT
+	add	x8, x0, x10
 	mov	x9, sp
 	stp	x19, x20, [x8], #16		// store callee-saved registers
 	stp	x21, x22, [x8], #16
@@ -594,7 +595,7 @@
 	stp	x27, x28, [x8], #16
 	stp	x29, x9, [x8], #16
 	str	lr, [x8]
-	add	x8, x1, #THREAD_CPU_CONTEXT
+	add	x8, x1, x10
 	ldp	x19, x20, [x8], #16		// restore callee-saved registers
 	ldp	x21, x22, [x8], #16
 	ldp	x23, x24, [x8], #16
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 240b75c..463fa2e 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -61,7 +61,7 @@
 static bool migrate_one_irq(struct irq_desc *desc)
 {
 	struct irq_data *d = irq_desc_get_irq_data(desc);
-	const struct cpumask *affinity = d->affinity;
+	const struct cpumask *affinity = irq_data_get_affinity_mask(d);
 	struct irq_chip *c;
 	bool ret = false;
 
@@ -81,7 +81,7 @@
 	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
 	else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
-		cpumask_copy(d->affinity, affinity);
+		cpumask_copy(irq_data_get_affinity_mask(d), affinity);
 
 	return ret;
 }
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index 1d66afd..f61f2dd 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -12,6 +12,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += param.h
 generic-y += percpu.h
 generic-y += preempt.h
diff --git a/arch/avr32/include/asm/mm-arch-hooks.h b/arch/avr32/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 145452f..0000000
--- a/arch/avr32/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_AVR32_MM_ARCH_HOOKS_H
-#define _ASM_AVR32_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_AVR32_MM_ARCH_HOOKS_H */
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index d0f771b..a124c55 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -18,6 +18,7 @@
 
 #include <mach/pm.h>
 
+static bool disable_cpu_idle_poll;
 
 static cycle_t read_cycle_count(struct clocksource *cs)
 {
@@ -80,45 +81,45 @@
 	return 0;
 }
 
-static void comparator_mode(enum clock_event_mode mode,
-		struct clock_event_device *evdev)
+static int comparator_shutdown(struct clock_event_device *evdev)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		pr_debug("%s: start\n", evdev->name);
-		/* FALLTHROUGH */
-	case CLOCK_EVT_MODE_RESUME:
+	pr_debug("%s: %s\n", __func__, evdev->name);
+	sysreg_write(COMPARE, 0);
+
+	if (disable_cpu_idle_poll) {
+		disable_cpu_idle_poll = false;
 		/*
-		 * If we're using the COUNT and COMPARE registers we
-		 * need to force idle poll.
+		 * Only disable idle poll if we have forced that
+		 * in a previous call.
 		 */
-		cpu_idle_poll_ctrl(true);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		sysreg_write(COMPARE, 0);
-		pr_debug("%s: stop\n", evdev->name);
-		if (evdev->mode == CLOCK_EVT_MODE_ONESHOT ||
-		    evdev->mode == CLOCK_EVT_MODE_RESUME) {
-			/*
-			 * Only disable idle poll if we have forced that
-			 * in a previous call.
-			 */
-			cpu_idle_poll_ctrl(false);
-		}
-		break;
-	default:
-		BUG();
+		cpu_idle_poll_ctrl(false);
 	}
+	return 0;
+}
+
+static int comparator_set_oneshot(struct clock_event_device *evdev)
+{
+	pr_debug("%s: %s\n", __func__, evdev->name);
+
+	disable_cpu_idle_poll = true;
+	/*
+	 * If we're using the COUNT and COMPARE registers we
+	 * need to force idle poll.
+	 */
+	cpu_idle_poll_ctrl(true);
+
+	return 0;
 }
 
 static struct clock_event_device comparator = {
-	.name		= "avr32_comparator",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 16,
-	.rating		= 50,
-	.set_next_event	= comparator_next_event,
-	.set_mode	= comparator_mode,
+	.name			= "avr32_comparator",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.shift			= 16,
+	.rating			= 50,
+	.set_next_event		= comparator_next_event,
+	.set_state_shutdown	= comparator_shutdown,
+	.set_state_oneshot	= comparator_set_oneshot,
+	.tick_resume		= comparator_set_oneshot,
 };
 
 void read_persistent_clock(struct timespec *ts)
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 23b1a97..52c179b 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -80,6 +80,9 @@
 {
 	unsigned long flags;
 
+	if (!clk)
+		return 0;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	__clk_enable(clk);
 	spin_unlock_irqrestore(&clk_lock, flags);
@@ -106,6 +109,9 @@
 {
 	unsigned long flags;
 
+	if (IS_ERR_OR_NULL(clk))
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	__clk_disable(clk);
 	spin_unlock_irqrestore(&clk_lock, flags);
@@ -117,6 +123,9 @@
 	unsigned long flags;
 	unsigned long rate;
 
+	if (!clk)
+		return 0;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	rate = clk->get_rate(clk);
 	spin_unlock_irqrestore(&clk_lock, flags);
@@ -129,6 +138,9 @@
 {
 	unsigned long flags, actual_rate;
 
+	if (!clk)
+		return 0;
+
 	if (!clk->set_rate)
 		return -ENOSYS;
 
@@ -145,6 +157,9 @@
 	unsigned long flags;
 	long ret;
 
+	if (!clk)
+		return 0;
+
 	if (!clk->set_rate)
 		return -ENOSYS;
 
@@ -161,6 +176,9 @@
 	unsigned long flags;
 	int ret;
 
+	if (!clk)
+		return 0;
+
 	if (!clk->set_parent)
 		return -ENOSYS;
 
@@ -174,7 +192,7 @@
 
 struct clk *clk_get_parent(struct clk *clk)
 {
-	return clk->parent;
+	return !clk ? NULL : clk->parent;
 }
 EXPORT_SYMBOL(clk_get_parent);
 
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index 07051a6..61cd1e7 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -21,6 +21,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += mutex.h
diff --git a/arch/blackfin/include/asm/mm-arch-hooks.h b/arch/blackfin/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 1c5211e..0000000
--- a/arch/blackfin/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_BLACKFIN_MM_ARCH_HOOKS_H
-#define _ASM_BLACKFIN_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_BLACKFIN_MM_ARCH_HOOKS_H */
diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild
index 7aeb322..f17c4dc 100644
--- a/arch/c6x/include/asm/Kbuild
+++ b/arch/c6x/include/asm/Kbuild
@@ -26,6 +26,7 @@
 generic-y += kmap_types.h
 generic-y += local.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += mmu.h
 generic-y += mmu_context.h
diff --git a/arch/c6x/include/asm/mm-arch-hooks.h b/arch/c6x/include/asm/mm-arch-hooks.h
deleted file mode 100644
index bb3c4a6..0000000
--- a/arch/c6x/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_C6X_MM_ARCH_HOOKS_H
-#define _ASM_C6X_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_C6X_MM_ARCH_HOOKS_H */
diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild
index d294f6a..ad2244f 100644
--- a/arch/cris/include/asm/Kbuild
+++ b/arch/cris/include/asm/Kbuild
@@ -18,6 +18,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += module.h
 generic-y += percpu.h
 generic-y += preempt.h
diff --git a/arch/cris/include/asm/mm-arch-hooks.h b/arch/cris/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 314f774..0000000
--- a/arch/cris/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_CRIS_MM_ARCH_HOOKS_H
-#define _ASM_CRIS_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_CRIS_MM_ARCH_HOOKS_H */
diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild
index 30edce3..8e47b83 100644
--- a/arch/frv/include/asm/Kbuild
+++ b/arch/frv/include/asm/Kbuild
@@ -4,5 +4,6 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += trace_clock.h
diff --git a/arch/frv/include/asm/mm-arch-hooks.h b/arch/frv/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 51d13a8..0000000
--- a/arch/frv/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_FRV_MM_ARCH_HOOKS_H
-#define _ASM_FRV_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_FRV_MM_ARCH_HOOKS_H */
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
index 00379d6..70e6ae1 100644
--- a/arch/h8300/include/asm/Kbuild
+++ b/arch/h8300/include/asm/Kbuild
@@ -33,6 +33,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += mmu.h
 generic-y += mmu_context.h
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index 5ade4a1..daee37b 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -28,6 +28,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += pci.h
diff --git a/arch/hexagon/include/asm/mm-arch-hooks.h b/arch/hexagon/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 05e8b93..0000000
--- a/arch/hexagon/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_HEXAGON_MM_ARCH_HOOKS_H
-#define _ASM_HEXAGON_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_HEXAGON_MM_ARCH_HOOKS_H */
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index ccff13d..9de3ba1 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -4,6 +4,7 @@
 generic-y += irq_work.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += trace_clock.h
 generic-y += vtime.h
diff --git a/arch/ia64/include/asm/mm-arch-hooks.h b/arch/ia64/include/asm/mm-arch-hooks.h
deleted file mode 100644
index ab4b5c6..0000000
--- a/arch/ia64/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_IA64_MM_ARCH_HOOKS_H
-#define _ASM_IA64_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_IA64_MM_ARCH_HOOKS_H */
diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild
index ba1cdc0..e0eb704 100644
--- a/arch/m32r/include/asm/Kbuild
+++ b/arch/m32r/include/asm/Kbuild
@@ -4,6 +4,7 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += module.h
 generic-y += preempt.h
 generic-y += sections.h
diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h
index 0c3f25e..f8de767 100644
--- a/arch/m32r/include/asm/io.h
+++ b/arch/m32r/include/asm/io.h
@@ -174,6 +174,11 @@
 #define iowrite16 writew
 #define iowrite32 writel
 
+#define ioread16be(addr)	be16_to_cpu(readw(addr))
+#define ioread32be(addr)	be32_to_cpu(readl(addr))
+#define iowrite16be(v, addr)	writew(cpu_to_be16(v), (addr))
+#define iowrite32be(v, addr)	writel(cpu_to_be32(v), (addr))
+
 #define mmiowb()
 
 #define flush_write_buffers() do { } while (0)  /* M32R_FIXME */
diff --git a/arch/m32r/include/asm/mm-arch-hooks.h b/arch/m32r/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 6d60b47..0000000
--- a/arch/m32r/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_M32R_MM_ARCH_HOOKS_H
-#define _ASM_M32R_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_M32R_MM_ARCH_HOOKS_H */
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 33013df..c496d48 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -125,6 +125,13 @@
 
 if COLDFIRE
 
+choice
+	prompt "ColdFire SoC type"
+	default M520x
+	help
+	  Select the type of ColdFire System-on-Chip (SoC) that you want
+	  to build for.
+
 config M5206
 	bool "MCF5206"
 	depends on !MMU
@@ -174,9 +181,6 @@
 	help
 	  Freescale (Motorola) Coldfire 5251/5253 processor support.
 
-config M527x
-	bool
-
 config M5271
 	bool "MCF5271"
 	depends on !MMU
@@ -223,9 +227,6 @@
 	help
 	  Motorola ColdFire 5307 processor support.
 
-config M53xx
-	bool
-
 config M532x
 	bool "MCF532x"
 	depends on !MMU
@@ -251,9 +252,6 @@
 	help
 	  Motorola ColdFire 5407 processor support.
 
-config M54xx
-	bool
-
 config M547x
 	bool "MCF547x"
 	select M54xx
@@ -280,6 +278,17 @@
 	help
 	  Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
 
+endchoice
+
+config M527x
+	bool
+
+config M53xx
+	bool
+
+config M54xx
+	bool
+
 endif # COLDFIRE
 
 
@@ -416,22 +425,18 @@
 config HAVE_IPSBAR
 	bool
 
-config CLOCK_SET
-	bool "Enable setting the CPU clock frequency"
-	depends on COLDFIRE
-	default n
-	help
-	  On some CPU's you do not need to know what the core CPU clock
-	  frequency is. On these you can disable clock setting. On some
-	  traditional 68K parts, and on all ColdFire parts you need to set
-	  the appropriate CPU clock frequency. On these devices many of the
-	  onboard peripherals derive their timing from the master CPU clock
-	  frequency.
-
 config CLOCK_FREQ
 	int "Set the core clock frequency"
+	default "25000000" if M5206
+	default "54000000" if M5206e
+	default "166666666" if M520x
+	default "140000000" if M5249
+	default "150000000" if M527x || M523x
+	default "90000000" if M5307
+	default "50000000" if M5407
+	default "266000000" if M54xx
 	default "66666666"
-	depends on CLOCK_SET
+	depends on COLDFIRE
 	help
 	  Define the CPU clock frequency in use. This is the core clock
 	  frequency, it may or may not be the same as the external clock
diff --git a/arch/m68k/configs/m5208evb_defconfig b/arch/m68k/configs/m5208evb_defconfig
index e7292f4..4c7b793 100644
--- a/arch/m68k/configs/m5208evb_defconfig
+++ b/arch/m68k/configs/m5208evb_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,17 +12,12 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_M520x=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=166666666
-CONFIG_CLOCK_DIV=2
-CONFIG_M5208EVB=y
+# CONFIG_MMU is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_RAMBASE=0x40000000
 CONFIG_RAMSIZE=0x2000000
 CONFIG_VECTORBASE=0x40000000
 CONFIG_KERNELBASE=0x40020000
-CONFIG_RAM16BIT=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -40,24 +31,19 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=115200
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
@@ -68,8 +54,6 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_FULLDEBUG=y
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+CONFIG_FULLDEBUG=y
diff --git a/arch/m68k/configs/m5249evb_defconfig b/arch/m68k/configs/m5249evb_defconfig
index 0cd4b39..a782f36 100644
--- a/arch/m68k/configs/m5249evb_defconfig
+++ b/arch/m68k/configs/m5249evb_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,10 +12,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5249=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=140000000
-CONFIG_CLOCK_DIV=2
 CONFIG_M5249C3=y
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00800000
@@ -38,23 +32,18 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
@@ -62,7 +51,5 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5272c3_defconfig b/arch/m68k/configs/m5272c3_defconfig
index a60cb35..6f5fb92 100644
--- a/arch/m68k/configs/m5272c3_defconfig
+++ b/arch/m68k/configs/m5272c3_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,8 +12,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5272=y
-CONFIG_CLOCK_SET=y
 CONFIG_M5272C3=y
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00800000
@@ -36,23 +32,18 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
@@ -61,6 +52,5 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
diff --git a/arch/m68k/configs/m5275evb_defconfig b/arch/m68k/configs/m5275evb_defconfig
index e6502ab..b5d7cd1 100644
--- a/arch/m68k/configs/m5275evb_defconfig
+++ b/arch/m68k/configs/m5275evb_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,11 +12,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5275=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=150000000
-CONFIG_CLOCK_DIV=2
-CONFIG_M5275EVB=y
 # CONFIG_4KSTACKS is not set
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00000000
@@ -39,24 +32,19 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
@@ -65,8 +53,5 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5307c3_defconfig b/arch/m68k/configs/m5307c3_defconfig
index 023812a..1b4c094 100644
--- a/arch/m68k/configs/m5307c3_defconfig
+++ b/arch/m68k/configs/m5307c3_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -16,10 +12,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5307=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=90000000
-CONFIG_CLOCK_DIV=2
 CONFIG_M5307C3=y
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00800000
@@ -38,16 +32,11 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y
 CONFIG_SLIP=y
 CONFIG_SLIP_COMPRESSED=y
@@ -56,21 +45,17 @@
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_FULLDEBUG=y
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
+CONFIG_FULLDEBUG=y
diff --git a/arch/m68k/configs/m5407c3_defconfig b/arch/m68k/configs/m5407c3_defconfig
index 557b39f..275ad543 100644
--- a/arch/m68k/configs/m5407c3_defconfig
+++ b/arch/m68k/configs/m5407c3_defconfig
@@ -1,10 +1,6 @@
-# CONFIG_MMU is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -17,9 +13,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
 CONFIG_M5407=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=50000000
 CONFIG_M5407C3=y
 CONFIG_RAMBASE=0x00000000
 CONFIG_RAMSIZE=0x00000000
@@ -38,22 +33,17 @@
 # CONFIG_IPV6 is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y
 # CONFIG_INPUT is not set
 # CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
@@ -63,8 +53,5 @@
 CONFIG_ROMFS_FS=y
 CONFIG_ROMFS_BACKED_BY_MTD=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_BOOTPARAM=y
 CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
-# CONFIG_CRC32 is not set
diff --git a/arch/m68k/configs/m5475evb_defconfig b/arch/m68k/configs/m5475evb_defconfig
index c5018a6..4f4ccd13 100644
--- a/arch/m68k/configs/m5475evb_defconfig
+++ b/arch/m68k/configs/m5475evb_defconfig
@@ -1,11 +1,7 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -20,19 +16,16 @@
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_COLDFIRE=y
-CONFIG_M547x=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=266000000
 # CONFIG_4KSTACKS is not set
 CONFIG_RAMBASE=0x0
 CONFIG_RAMSIZE=0x2000000
 CONFIG_VECTORBASE=0x0
 CONFIG_MBAR=0xff000000
 CONFIG_KERNELBASE=0x20000
+CONFIG_PCI=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index 1555bc1..eb85bd9 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -18,6 +18,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += mutex.h
 generic-y += percpu.h
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
index c94557b..50aa4da 100644
--- a/arch/m68k/include/asm/coldfire.h
+++ b/arch/m68k/include/asm/coldfire.h
@@ -19,7 +19,7 @@
  *	in any case new boards come along from time to time that have yet
  *	another different clocking frequency.
  */
-#ifdef CONFIG_CLOCK_SET
+#ifdef CONFIG_CLOCK_FREQ
 #define	MCF_CLK		CONFIG_CLOCK_FREQ
 #else
 #error "Don't know what your ColdFire CPU clock frequency is??"
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index 618c85d3..f55cad5 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -413,7 +413,8 @@
 #define writew(val, addr)	out_le16((addr), (val))
 #endif /* CONFIG_ATARI_ROM_ISA */
 
-#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA)
+#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA) && \
+    !(defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE))
 /*
  * We need to define dummy functions for GENERIC_IOMAP support.
  */
diff --git a/arch/m68k/include/asm/mm-arch-hooks.h b/arch/m68k/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 7e8709b..0000000
--- a/arch/m68k/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_M68K_MM_ARCH_HOOKS_H
-#define _ASM_M68K_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_M68K_MM_ARCH_HOOKS_H */
diff --git a/arch/metag/include/asm/Kbuild b/arch/metag/include/asm/Kbuild
index 199320f..df31353 100644
--- a/arch/metag/include/asm/Kbuild
+++ b/arch/metag/include/asm/Kbuild
@@ -25,6 +25,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += msgbuf.h
 generic-y += mutex.h
 generic-y += param.h
diff --git a/arch/metag/include/asm/mm-arch-hooks.h b/arch/metag/include/asm/mm-arch-hooks.h
deleted file mode 100644
index b0072b2..0000000
--- a/arch/metag/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_METAG_MM_ARCH_HOOKS_H
-#define _ASM_METAG_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_METAG_MM_ARCH_HOOKS_H */
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
index 9989ddb..2f222f3 100644
--- a/arch/microblaze/include/asm/Kbuild
+++ b/arch/microblaze/include/asm/Kbuild
@@ -6,6 +6,7 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += syscalls.h
 generic-y += trace_clock.h
diff --git a/arch/microblaze/include/asm/mm-arch-hooks.h b/arch/microblaze/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 5c40659..0000000
--- a/arch/microblaze/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_MICROBLAZE_MM_ARCH_HOOKS_H
-#define _ASM_MICROBLAZE_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_MICROBLAZE_MM_ARCH_HOOKS_H */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index aab7e46..cee5f93 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1427,6 +1427,7 @@
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_MSA
 	select GENERIC_CSUM
+	select MIPS_O32_FP64_SUPPORT if MIPS32_O32
 	help
 	  Choose this option to build a kernel for release 6 or later of the
 	  MIPS64 architecture.  New MIPS processors, starting with the Warrior
@@ -2262,11 +2263,6 @@
 config MIPS_CPC
 	bool
 
-config SB1_PASS_1_WORKAROUNDS
-	bool
-	depends on CPU_SB1_PASS_1
-	default y
-
 config SB1_PASS_2_WORKAROUNDS
 	bool
 	depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ae2dd59..252e347 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -181,13 +181,6 @@
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
 
-ifdef CONFIG_CPU_SB1
-ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
-KBUILD_AFLAGS_MODULE += -msb1-pass1-workarounds
-KBUILD_CFLAGS_MODULE += -msb1-pass1-workarounds
-endif
-endif
-
 # For smartmips configurations, there are hundreds of warnings due to ISA overrides
 # in assembly and header files. smartmips is only supported for MIPS32r1 onwards
 # and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 7fe5c61..1f85460 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -7,6 +7,7 @@
 generic-y += irq_work.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mutex.h
 generic-y += parport.h
 generic-y += percpu.h
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index 084780b..1b06251 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -74,7 +74,7 @@
 		goto fr_common;
 
 	case FPU_64BIT:
-#if !(defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS32_R6) \
+#if !(defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) \
       || defined(CONFIG_64BIT))
 		/* we only have a 32-bit FPU */
 		return SIGFPE;
diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h
index 0a227d4..520f8fc 100644
--- a/arch/mips/include/asm/mach-sibyte/war.h
+++ b/arch/mips/include/asm/mach-sibyte/war.h
@@ -13,8 +13,7 @@
 #define R4600_V2_HIT_CACHEOP_WAR	0
 #define R5432_CP0_INTERRUPT_WAR		0
 
-#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
-    defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
+#if defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
 
 #ifndef __ASSEMBLY__
 extern int sb1250_m3_workaround_needed(void);
diff --git a/arch/mips/include/asm/mm-arch-hooks.h b/arch/mips/include/asm/mm-arch-hooks.h
deleted file mode 100644
index b5609fe..0000000
--- a/arch/mips/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_MIPS_MM_ARCH_HOOKS_H
-#define _ASM_MIPS_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_MIPS_MM_ARCH_HOOKS_H */
diff --git a/arch/mips/include/uapi/asm/sigcontext.h b/arch/mips/include/uapi/asm/sigcontext.h
index 6c9906f..9081d88 100644
--- a/arch/mips/include/uapi/asm/sigcontext.h
+++ b/arch/mips/include/uapi/asm/sigcontext.h
@@ -16,7 +16,7 @@
 
 /*
  * Keep this struct definition in sync with the sigcontext fragment
- * in arch/mips/tools/offset.c
+ * in arch/mips/kernel/asm-offsets.c
  */
 struct sigcontext {
 	unsigned int		sc_regmask;	/* Unused */
@@ -46,7 +46,7 @@
 #include <linux/posix_types.h>
 /*
  * Keep this struct definition in sync with the sigcontext fragment
- * in arch/mips/tools/offset.c
+ * in arch/mips/kernel/asm-offsets.c
  *
  * Warning: this structure illdefined with sc_badvaddr being just an unsigned
  * int so it was changed to unsigned long in 2.6.0-test1.  This may break
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index beabe19..072fab1 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -1,5 +1,5 @@
 /*
- * offset.c: Calculate pt_regs and task_struct offsets.
+ * asm-offsets.c: Calculate pt_regs and task_struct offsets.
  *
  * Copyright (C) 1996 David S. Miller
  * Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003 Ralf Baechle
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index a8bb972..cb9a095 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -81,11 +81,6 @@
 	prompt "SiByte SOC Stepping"
 	depends on SIBYTE_SB1xxx_SOC
 
-config CPU_SB1_PASS_1
-	bool "1250 Pass1"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-
 config CPU_SB1_PASS_2_1250
 	bool "1250 An"
 	depends on SIBYTE_SB1250
diff --git a/arch/mips/sibyte/common/bus_watcher.c b/arch/mips/sibyte/common/bus_watcher.c
index 5581844..41a1d22 100644
--- a/arch/mips/sibyte/common/bus_watcher.c
+++ b/arch/mips/sibyte/common/bus_watcher.c
@@ -81,10 +81,7 @@
 {
 	u32 status, l2_err, memio_err;
 
-#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
-	/* Destructive read, clears register and interrupt */
-	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
-#elif defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
+#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
 	/* Use non-destructive register */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG));
 #elif defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index 3c02b2a..9d3c24e 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -202,12 +202,10 @@
 
 	switch (war_pass) {
 	case K_SYS_REVISION_BCM1250_PASS1:
-#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
 		printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
 			    "and the kernel doesn't have the proper "
 			    "workarounds compiled in. @@@@\n");
 		bad_config = 1;
-#endif
 		break;
 	case K_SYS_REVISION_BCM1250_PASS2:
 		/* Pass 2 - easiest as default for now - so many numbers */
diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild
index de30b0c..6edb9ee 100644
--- a/arch/mn10300/include/asm/Kbuild
+++ b/arch/mn10300/include/asm/Kbuild
@@ -5,6 +5,7 @@
 generic-y += exec.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += sections.h
 generic-y += trace_clock.h
diff --git a/arch/mn10300/include/asm/mm-arch-hooks.h b/arch/mn10300/include/asm/mm-arch-hooks.h
deleted file mode 100644
index e2029a6..0000000
--- a/arch/mn10300/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_MN10300_MM_ARCH_HOOKS_H
-#define _ASM_MN10300_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_MN10300_MM_ARCH_HOOKS_H */
diff --git a/arch/nios2/include/asm/Kbuild b/arch/nios2/include/asm/Kbuild
index 434639d..914864e 100644
--- a/arch/nios2/include/asm/Kbuild
+++ b/arch/nios2/include/asm/Kbuild
@@ -30,6 +30,7 @@
 generic-y += kvm_para.h
 generic-y += local.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += module.h
 generic-y += msgbuf.h
diff --git a/arch/nios2/include/asm/mm-arch-hooks.h b/arch/nios2/include/asm/mm-arch-hooks.h
deleted file mode 100644
index d7290dc..0000000
--- a/arch/nios2/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_NIOS2_MM_ARCH_HOOKS_H
-#define _ASM_NIOS2_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_NIOS2_MM_ARCH_HOOKS_H */
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index e5a693b..443f44d 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -17,6 +17,7 @@
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IOMAP
 	select GENERIC_CPU_DEVICES
+	select HAVE_UID16
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_STRNCPY_FROM_USER
@@ -31,9 +32,6 @@
 config HAVE_DMA_ATTRS
 	def_bool y
 
-config UID16
-	def_bool y
-
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index 2a2e39b..2832f03 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -36,6 +36,7 @@
 generic-y += kvm_para.h
 generic-y += local.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += module.h
 generic-y += msgbuf.h
diff --git a/arch/openrisc/include/asm/mm-arch-hooks.h b/arch/openrisc/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 6d33cb5..0000000
--- a/arch/openrisc/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_OPENRISC_MM_ARCH_HOOKS_H
-#define _ASM_OPENRISC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_OPENRISC_MM_ARCH_HOOKS_H */
diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild
index 12b341d..f9b3a81 100644
--- a/arch/parisc/include/asm/Kbuild
+++ b/arch/parisc/include/asm/Kbuild
@@ -15,6 +15,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mutex.h
 generic-y += param.h
 generic-y += percpu.h
diff --git a/arch/parisc/include/asm/mm-arch-hooks.h b/arch/parisc/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 654ec63..0000000
--- a/arch/parisc/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_PARISC_MM_ARCH_HOOKS_H
-#define _ASM_PARISC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_PARISC_MM_ARCH_HOOKS_H */
diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h
index 3a08eae..3edbb9f 100644
--- a/arch/parisc/include/asm/pgalloc.h
+++ b/arch/parisc/include/asm/pgalloc.h
@@ -72,7 +72,7 @@
 
 static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 {
-	if(pmd_flag(*pmd) & PxD_FLAG_ATTACHED)
+	if (pmd_flag(*pmd) & PxD_FLAG_ATTACHED) {
 		/*
 		 * This is the permanent pmd attached to the pgd;
 		 * cannot free it.
@@ -81,6 +81,7 @@
 		 */
 		mm_inc_nr_pmds(mm);
 		return;
+	}
 	free_pages((unsigned long)pmd, PMD_ORDER);
 }
 
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
index dc5385e..5ad26dd 100644
--- a/arch/s390/include/asm/Kbuild
+++ b/arch/s390/include/asm/Kbuild
@@ -3,5 +3,6 @@
 generic-y += clkdev.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += trace_clock.h
diff --git a/arch/s390/include/asm/ctl_reg.h b/arch/s390/include/asm/ctl_reg.h
index cfad7fca..d7697ab 100644
--- a/arch/s390/include/asm/ctl_reg.h
+++ b/arch/s390/include/asm/ctl_reg.h
@@ -57,7 +57,10 @@
 		unsigned long lap  : 1; /* Low-address-protection control */
 		unsigned long	   : 4;
 		unsigned long edat : 1; /* Enhanced-DAT-enablement control */
-		unsigned long	   : 23;
+		unsigned long	   : 4;
+		unsigned long afp  : 1; /* AFP-register control */
+		unsigned long vx   : 1; /* Vector enablement control */
+		unsigned long	   : 17;
 	};
 };
 
diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h
index 0130d03..d9be7c0 100644
--- a/arch/s390/include/asm/hugetlb.h
+++ b/arch/s390/include/asm/hugetlb.h
@@ -14,6 +14,7 @@
 
 #define is_hugepage_only_range(mm, addr, len)	0
 #define hugetlb_free_pgd_range			free_pgd_range
+#define hugepages_supported()			(MACHINE_HAS_HPAGE)
 
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		     pte_t *ptep, pte_t pte);
diff --git a/arch/s390/include/asm/mm-arch-hooks.h b/arch/s390/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 07680b2..0000000
--- a/arch/s390/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_S390_MM_ARCH_HOOKS_H
-#define _ASM_S390_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_S390_MM_ARCH_HOOKS_H */
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index dd34523..53eacbd 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -17,10 +17,7 @@
 #define PAGE_DEFAULT_ACC	0
 #define PAGE_DEFAULT_KEY	(PAGE_DEFAULT_ACC << 4)
 
-#include <asm/setup.h>
-#ifndef __ASSEMBLY__
-
-extern int HPAGE_SHIFT;
+#define HPAGE_SHIFT	20
 #define HPAGE_SIZE	(1UL << HPAGE_SHIFT)
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
@@ -30,6 +27,9 @@
 #define ARCH_HAS_PREPARE_HUGEPAGE
 #define ARCH_HAS_HUGEPAGE_CLEAR_FLUSH
 
+#include <asm/setup.h>
+#ifndef __ASSEMBLY__
+
 static inline void storage_key_init_range(unsigned long start, unsigned long end)
 {
 #if PAGE_DEFAULT_KEY
diff --git a/arch/s390/include/asm/perf_event.h b/arch/s390/include/asm/perf_event.h
index 4cb19fe..f897ec7 100644
--- a/arch/s390/include/asm/perf_event.h
+++ b/arch/s390/include/asm/perf_event.h
@@ -87,7 +87,15 @@
 } __packed;
 
 /* Perf hardware reserve and release functions */
+#ifdef CONFIG_PERF_EVENTS
 int perf_reserve_sampling(void);
 void perf_release_sampling(void);
+#else /* CONFIG_PERF_EVENTS */
+static inline int perf_reserve_sampling(void)
+{
+	return 0;
+}
+static inline void perf_release_sampling(void) {}
+#endif /* CONFIG_PERF_EVENTS */
 
 #endif /* _ASM_S390_PERF_EVENT_H */
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index c7d1b9d..a2da259 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -23,15 +23,15 @@
 
 int main(void)
 {
-	DEFINE(__THREAD_info, offsetof(struct task_struct, stack));
-	DEFINE(__THREAD_ksp, offsetof(struct task_struct, thread.ksp));
-	DEFINE(__THREAD_mm_segment, offsetof(struct task_struct, thread.mm_segment));
-	BLANK();
+	DEFINE(__TASK_thread_info, offsetof(struct task_struct, stack));
+	DEFINE(__TASK_thread, offsetof(struct task_struct, thread));
 	DEFINE(__TASK_pid, offsetof(struct task_struct, pid));
 	BLANK();
-	DEFINE(__THREAD_per_cause, offsetof(struct task_struct, thread.per_event.cause));
-	DEFINE(__THREAD_per_address, offsetof(struct task_struct, thread.per_event.address));
-	DEFINE(__THREAD_per_paid, offsetof(struct task_struct, thread.per_event.paid));
+	DEFINE(__THREAD_ksp, offsetof(struct thread_struct, ksp));
+	DEFINE(__THREAD_per_cause, offsetof(struct thread_struct, per_event.cause));
+	DEFINE(__THREAD_per_address, offsetof(struct thread_struct, per_event.address));
+	DEFINE(__THREAD_per_paid, offsetof(struct thread_struct, per_event.paid));
+	DEFINE(__THREAD_trap_tdb, offsetof(struct thread_struct, trap_tdb));
 	BLANK();
 	DEFINE(__TI_task, offsetof(struct thread_info, task));
 	DEFINE(__TI_flags, offsetof(struct thread_info, flags));
@@ -176,7 +176,6 @@
 	DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
 	DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
 	DEFINE(__LC_PGM_TDB, offsetof(struct _lowcore, pgm_tdb));
-	DEFINE(__THREAD_trap_tdb, offsetof(struct task_struct, thread.trap_tdb));
 	DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
 	DEFINE(__SIE_PROG0C, offsetof(struct kvm_s390_sie_block, prog0c));
 	DEFINE(__SIE_PROG20, offsetof(struct kvm_s390_sie_block, prog20));
diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c
index bff5e3b..8ba3243 100644
--- a/arch/s390/kernel/cache.c
+++ b/arch/s390/kernel/cache.c
@@ -138,6 +138,8 @@
 	union cache_topology ct;
 	enum cache_type ctype;
 
+	if (!test_facility(34))
+		return -EOPNOTSUPP;
 	if (!this_cpu_ci)
 		return -EINVAL;
 	ct.raw = ecag(EXTRACT_TOPOLOGY, 0, 0);
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 3238893..84062e7 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -178,17 +178,21 @@
  */
 ENTRY(__switch_to)
 	stmg	%r6,%r15,__SF_GPRS(%r15)	# store gprs of prev task
-	stg	%r15,__THREAD_ksp(%r2)		# store kernel stack of prev
-	lg	%r4,__THREAD_info(%r2)		# get thread_info of prev
-	lg	%r5,__THREAD_info(%r3)		# get thread_info of next
+	lgr	%r1,%r2
+	aghi	%r1,__TASK_thread		# thread_struct of prev task
+	lg	%r4,__TASK_thread_info(%r2)	# get thread_info of prev
+	lg	%r5,__TASK_thread_info(%r3)	# get thread_info of next
+	stg	%r15,__THREAD_ksp(%r1)		# store kernel stack of prev
+	lgr	%r1,%r3
+	aghi	%r1,__TASK_thread		# thread_struct of next task
 	lgr	%r15,%r5
 	aghi	%r15,STACK_INIT			# end of kernel stack of next
 	stg	%r3,__LC_CURRENT		# store task struct of next
 	stg	%r5,__LC_THREAD_INFO		# store thread info of next
 	stg	%r15,__LC_KERNEL_STACK		# store end of kernel stack
+	lg	%r15,__THREAD_ksp(%r1)		# load kernel stack of next
 	lctl	%c4,%c4,__TASK_pid(%r3)		# load pid to control reg. 4
 	mvc	__LC_CURRENT_PID+4(4,%r0),__TASK_pid(%r3) # store pid of next
-	lg	%r15,__THREAD_ksp(%r3)		# load kernel stack of next
 	lmg	%r6,%r15,__SF_GPRS(%r15)	# load gprs of next task
 	br	%r14
 
@@ -417,6 +421,7 @@
 	LAST_BREAK %r14
 	lg	%r15,__LC_KERNEL_STACK
 	lg	%r14,__TI_task(%r12)
+	aghi	%r14,__TASK_thread	# pointer to thread_struct
 	lghi	%r13,__LC_PGM_TDB
 	tm	__LC_PGM_ILC+2,0x02	# check for transaction abort
 	jz	2f
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 505c17c..56b5508 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -21,6 +21,7 @@
 #include <asm/nmi.h>
 #include <asm/crw.h>
 #include <asm/switch_to.h>
+#include <asm/ctl_reg.h>
 
 struct mcck_struct {
 	int kill_task;
@@ -129,26 +130,30 @@
 	} else
 		asm volatile("lfpc 0(%0)" : : "a" (fpt_creg_save_area));
 
-	asm volatile(
-		"	ld	0,0(%0)\n"
-		"	ld	1,8(%0)\n"
-		"	ld	2,16(%0)\n"
-		"	ld	3,24(%0)\n"
-		"	ld	4,32(%0)\n"
-		"	ld	5,40(%0)\n"
-		"	ld	6,48(%0)\n"
-		"	ld	7,56(%0)\n"
-		"	ld	8,64(%0)\n"
-		"	ld	9,72(%0)\n"
-		"	ld	10,80(%0)\n"
-		"	ld	11,88(%0)\n"
-		"	ld	12,96(%0)\n"
-		"	ld	13,104(%0)\n"
-		"	ld	14,112(%0)\n"
-		"	ld	15,120(%0)\n"
-		: : "a" (fpt_save_area));
-	/* Revalidate vector registers */
-	if (MACHINE_HAS_VX && current->thread.vxrs) {
+	if (!MACHINE_HAS_VX) {
+		/* Revalidate floating point registers */
+		asm volatile(
+			"	ld	0,0(%0)\n"
+			"	ld	1,8(%0)\n"
+			"	ld	2,16(%0)\n"
+			"	ld	3,24(%0)\n"
+			"	ld	4,32(%0)\n"
+			"	ld	5,40(%0)\n"
+			"	ld	6,48(%0)\n"
+			"	ld	7,56(%0)\n"
+			"	ld	8,64(%0)\n"
+			"	ld	9,72(%0)\n"
+			"	ld	10,80(%0)\n"
+			"	ld	11,88(%0)\n"
+			"	ld	12,96(%0)\n"
+			"	ld	13,104(%0)\n"
+			"	ld	14,112(%0)\n"
+			"	ld	15,120(%0)\n"
+			: : "a" (fpt_save_area));
+	} else {
+		/* Revalidate vector registers */
+		union ctlreg0 cr0;
+
 		if (!mci->vr) {
 			/*
 			 * Vector registers can't be restored and therefore
@@ -156,8 +161,12 @@
 			 */
 			kill_task = 1;
 		}
+		cr0.val = S390_lowcore.cregs_save_area[0];
+		cr0.afp = cr0.vx = 1;
+		__ctl_load(cr0.val, 0, 0);
 		restore_vx_regs((__vector128 *)
-				S390_lowcore.vector_save_area_addr);
+				&S390_lowcore.vector_save_area);
+		__ctl_load(S390_lowcore.cregs_save_area[0], 0, 0);
 	}
 	/* Revalidate access registers */
 	asm volatile(
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index dc5edc2..8f587d8 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -163,7 +163,7 @@
 asmlinkage void execve_tail(void)
 {
 	current->thread.fp_regs.fpc = 0;
-	asm volatile("sfpc %0,%0" : : "d" (0));
+	asm volatile("sfpc %0" : : "d" (0));
 }
 
 /*
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index 43c3169..ada0c07 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -270,6 +270,8 @@
 	jno	.Lesa2
 	ahi	%r15,-80
 	stmh	%r6,%r15,96(%r15)		# store upper register halves
+	basr	%r13,0
+	lmh	%r0,%r15,.Lzeroes-.(%r13)	# clear upper register halves
 .Lesa2:
 	lr	%r10,%r2			# save string pointer
 	lhi	%r2,0
@@ -291,6 +293,8 @@
 .Lesa3:
 	lm	%r6,%r15,120(%r15)		# restore registers
 	br	%r14
+.Lzeroes:
+	.fill	64,4,0
 
 .LwritedataS4:
 	.long	0x00760005			# SCLP command for write data
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index f7f027c..ca070d2 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -885,8 +885,6 @@
 	 */
 	setup_hwcaps();
 
-	HPAGE_SHIFT = MACHINE_HAS_HPAGE ? 20 : 0;
-
 	/*
 	 * Create kernel page tables and switch to virtual addressing.
 	 */
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 4d96c9f..7bea81d 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -259,7 +259,7 @@
 	}
 
 	/* get vector interrupt code from fpc */
-	asm volatile("stfpc %0" : "=m" (current->thread.fp_regs.fpc));
+	asm volatile("stfpc %0" : "=Q" (current->thread.fp_regs.fpc));
 	vic = (current->thread.fp_regs.fpc & 0xf00) >> 8;
 	switch (vic) {
 	case 1: /* invalid vector operation */
@@ -297,7 +297,7 @@
 
 	location = get_trap_ip(regs);
 
-	asm volatile("stfpc %0" : "=m" (current->thread.fp_regs.fpc));
+	asm volatile("stfpc %0" : "=Q" (current->thread.fp_regs.fpc));
 	/* Check for vector register enablement */
 	if (MACHINE_HAS_VX && !current->thread.vxrs &&
 	    (current->thread.fp_regs.fpc & FPC_DXC_MASK) == 0xfe00) {
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 33082d0..b33f661 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -31,8 +31,6 @@
 #define ALLOC_ORDER	2
 #define FRAG_MASK	0x03
 
-int HPAGE_SHIFT;
-
 unsigned long *crst_table_alloc(struct mm_struct *mm)
 {
 	struct page *page = alloc_pages(GFP_KERNEL, ALLOC_ORDER);
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index fee782a..8d2e516 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -448,13 +448,13 @@
 		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
 			      BPF_REG_1, offsetof(struct sk_buff, data));
 	}
-	/* BPF compatibility: clear A (%b7) and X (%b8) registers */
-	if (REG_SEEN(BPF_REG_7))
-		/* lghi %b7,0 */
-		EMIT4_IMM(0xa7090000, BPF_REG_7, 0);
-	if (REG_SEEN(BPF_REG_8))
-		/* lghi %b8,0 */
-		EMIT4_IMM(0xa7090000, BPF_REG_8, 0);
+	/* BPF compatibility: clear A (%b0) and X (%b7) registers */
+	if (REG_SEEN(BPF_REG_A))
+		/* lghi %ba,0 */
+		EMIT4_IMM(0xa7090000, BPF_REG_A, 0);
+	if (REG_SEEN(BPF_REG_X))
+		/* lghi %bx,0 */
+		EMIT4_IMM(0xa7090000, BPF_REG_X, 0);
 }
 
 /*
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index bc927a0..9cfa2ff 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -16,6 +16,7 @@
 #include <linux/fs.h>
 #include <linux/module.h>
 #include <asm/processor.h>
+#include <asm/perf_event.h>
 
 #include "../../../drivers/oprofile/oprof.h"
 
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
index 138fb3d..92ffe39 100644
--- a/arch/score/include/asm/Kbuild
+++ b/arch/score/include/asm/Kbuild
@@ -7,6 +7,7 @@
 generic-y += cputime.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += sections.h
 generic-y += trace_clock.h
diff --git a/arch/score/include/asm/mm-arch-hooks.h b/arch/score/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 5e38689..0000000
--- a/arch/score/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_SCORE_MM_ARCH_HOOKS_H
-#define _ASM_SCORE_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_SCORE_MM_ARCH_HOOKS_H */
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 9ac4626..aac452b 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -16,6 +16,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += param.h
diff --git a/arch/sh/include/asm/mm-arch-hooks.h b/arch/sh/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 1808729..0000000
--- a/arch/sh/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_SH_MM_ARCH_HOOKS_H
-#define _ASM_SH_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_SH_MM_ARCH_HOOKS_H */
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index 2b2a69d..e9286188 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -12,6 +12,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += module.h
 generic-y += mutex.h
 generic-y += preempt.h
diff --git a/arch/sparc/include/asm/mm-arch-hooks.h b/arch/sparc/include/asm/mm-arch-hooks.h
deleted file mode 100644
index b89ba44..0000000
--- a/arch/sparc/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_SPARC_MM_ARCH_HOOKS_H
-#define _ASM_SPARC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_SPARC_MM_ARCH_HOOKS_H */
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index d536544..d8a8431 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -19,6 +19,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += msgbuf.h
 generic-y += mutex.h
 generic-y += param.h
diff --git a/arch/tile/include/asm/mm-arch-hooks.h b/arch/tile/include/asm/mm-arch-hooks.h
deleted file mode 100644
index d1709ea..0000000
--- a/arch/tile/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_TILE_MM_ARCH_HOOKS_H
-#define _ASM_TILE_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_TILE_MM_ARCH_HOOKS_H */
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index 99c9ff8..6b755d1 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -1139,7 +1139,7 @@
 
 void __init free_initrd_mem(unsigned long begin, unsigned long end)
 {
-	free_bootmem(__pa(begin), end - begin);
+	free_bootmem_late(__pa(begin), end - begin);
 }
 
 static int __init setup_initrd(char *str)
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
index 3d63ff6..149ec55 100644
--- a/arch/um/include/asm/Kbuild
+++ b/arch/um/include/asm/Kbuild
@@ -16,6 +16,7 @@
 generic-y += irq_work.h
 generic-y += kdebug.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mutex.h
 generic-y += param.h
 generic-y += pci.h
diff --git a/arch/um/include/asm/mm-arch-hooks.h b/arch/um/include/asm/mm-arch-hooks.h
deleted file mode 100644
index a7c8b0d..0000000
--- a/arch/um/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_UM_MM_ARCH_HOOKS_H
-#define _ASM_UM_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_UM_MM_ARCH_HOOKS_H */
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
index d12b377..1fc7a28 100644
--- a/arch/unicore32/include/asm/Kbuild
+++ b/arch/unicore32/include/asm/Kbuild
@@ -26,6 +26,7 @@
 generic-y += kmap_types.h
 generic-y += local.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += module.h
 generic-y += msgbuf.h
diff --git a/arch/unicore32/include/asm/mm-arch-hooks.h b/arch/unicore32/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 4d79a85..0000000
--- a/arch/unicore32/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_UNICORE32_MM_ARCH_HOOKS_H
-#define _ASM_UNICORE32_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_UNICORE32_MM_ARCH_HOOKS_H */
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3dbb7e7..b3a1a5d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -41,6 +41,7 @@
 	select ARCH_USE_CMPXCHG_LOCKREF		if X86_64
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
+	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_IPC_PARSE_VERSION	if X86_32
 	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index a15893d..d8c0d32 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -297,6 +297,18 @@
 
 	  If unsure, say N.
 
+config DEBUG_ENTRY
+	bool "Debug low-level entry code"
+	depends on DEBUG_KERNEL
+	---help---
+	  This option enables sanity checks in x86's low-level entry code.
+	  Some of these sanity checks may slow down kernel entries and
+	  exits or otherwise impact performance.
+
+	  This is currently used to help test NMI code.
+
+	  If unsure, say N.
+
 config DEBUG_NMI_SELFTEST
 	bool "NMI Selftest"
 	depends on DEBUG_KERNEL && X86_LOCAL_APIC
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 3bb2c43..8cb3e43 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1237,11 +1237,12 @@
 	 *  If the variable is not set and the stack is not the NMI
 	 *  stack then:
 	 *    o Set the special variable on the stack
-	 *    o Copy the interrupt frame into a "saved" location on the stack
-	 *    o Copy the interrupt frame into a "copy" location on the stack
+	 *    o Copy the interrupt frame into an "outermost" location on the
+	 *      stack
+	 *    o Copy the interrupt frame into an "iret" location on the stack
 	 *    o Continue processing the NMI
 	 *  If the variable is set or the previous stack is the NMI stack:
-	 *    o Modify the "copy" location to jump to the repeate_nmi
+	 *    o Modify the "iret" location to jump to the repeat_nmi
 	 *    o return back to the first NMI
 	 *
 	 * Now on exit of the first NMI, we first clear the stack variable
@@ -1250,31 +1251,151 @@
 	 * a nested NMI that updated the copy interrupt stack frame, a
 	 * jump will be made to the repeat_nmi code that will handle the second
 	 * NMI.
+	 *
+	 * However, espfix prevents us from directly returning to userspace
+	 * with a single IRET instruction.  Similarly, IRET to user mode
+	 * can fault.  We therefore handle NMIs from user space like
+	 * other IST entries.
 	 */
 
 	/* Use %rdx as our temp variable throughout */
 	pushq	%rdx
 
-	/*
-	 * If %cs was not the kernel segment, then the NMI triggered in user
-	 * space, which means it is definitely not nested.
-	 */
-	cmpl	$__KERNEL_CS, 16(%rsp)
-	jne	first_nmi
+	testb	$3, CS-RIP+8(%rsp)
+	jz	.Lnmi_from_kernel
 
 	/*
-	 * Check the special variable on the stack to see if NMIs are
-	 * executing.
+	 * NMI from user mode.  We need to run on the thread stack, but we
+	 * can't go through the normal entry paths: NMIs are masked, and
+	 * we don't want to enable interrupts, because then we'll end
+	 * up in an awkward situation in which IRQs are on but NMIs
+	 * are off.
+	 */
+
+	SWAPGS
+	cld
+	movq	%rsp, %rdx
+	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+	pushq	5*8(%rdx)	/* pt_regs->ss */
+	pushq	4*8(%rdx)	/* pt_regs->rsp */
+	pushq	3*8(%rdx)	/* pt_regs->flags */
+	pushq	2*8(%rdx)	/* pt_regs->cs */
+	pushq	1*8(%rdx)	/* pt_regs->rip */
+	pushq   $-1		/* pt_regs->orig_ax */
+	pushq   %rdi		/* pt_regs->di */
+	pushq   %rsi		/* pt_regs->si */
+	pushq   (%rdx)		/* pt_regs->dx */
+	pushq   %rcx		/* pt_regs->cx */
+	pushq   %rax		/* pt_regs->ax */
+	pushq   %r8		/* pt_regs->r8 */
+	pushq   %r9		/* pt_regs->r9 */
+	pushq   %r10		/* pt_regs->r10 */
+	pushq   %r11		/* pt_regs->r11 */
+	pushq	%rbx		/* pt_regs->rbx */
+	pushq	%rbp		/* pt_regs->rbp */
+	pushq	%r12		/* pt_regs->r12 */
+	pushq	%r13		/* pt_regs->r13 */
+	pushq	%r14		/* pt_regs->r14 */
+	pushq	%r15		/* pt_regs->r15 */
+
+	/*
+	 * At this point we no longer need to worry about stack damage
+	 * due to nesting -- we're on the normal thread stack and we're
+	 * done with the NMI stack.
+	 */
+
+	movq	%rsp, %rdi
+	movq	$-1, %rsi
+	call	do_nmi
+
+	/*
+	 * Return back to user mode.  We must *not* do the normal exit
+	 * work, because we don't want to enable interrupts.  Fortunately,
+	 * do_nmi doesn't modify pt_regs.
+	 */
+	SWAPGS
+	jmp	restore_c_regs_and_iret
+
+.Lnmi_from_kernel:
+	/*
+	 * Here's what our stack frame will look like:
+	 * +---------------------------------------------------------+
+	 * | original SS                                             |
+	 * | original Return RSP                                     |
+	 * | original RFLAGS                                         |
+	 * | original CS                                             |
+	 * | original RIP                                            |
+	 * +---------------------------------------------------------+
+	 * | temp storage for rdx                                    |
+	 * +---------------------------------------------------------+
+	 * | "NMI executing" variable                                |
+	 * +---------------------------------------------------------+
+	 * | iret SS          } Copied from "outermost" frame        |
+	 * | iret Return RSP  } on each loop iteration; overwritten  |
+	 * | iret RFLAGS      } by a nested NMI to force another     |
+	 * | iret CS          } iteration if needed.                 |
+	 * | iret RIP         }                                      |
+	 * +---------------------------------------------------------+
+	 * | outermost SS          } initialized in first_nmi;       |
+	 * | outermost Return RSP  } will not be changed before      |
+	 * | outermost RFLAGS      } NMI processing is done.         |
+	 * | outermost CS          } Copied to "iret" frame on each  |
+	 * | outermost RIP         } iteration.                      |
+	 * +---------------------------------------------------------+
+	 * | pt_regs                                                 |
+	 * +---------------------------------------------------------+
+	 *
+	 * The "original" frame is used by hardware.  Before re-enabling
+	 * NMIs, we need to be done with it, and we need to leave enough
+	 * space for the asm code here.
+	 *
+	 * We return by executing IRET while RSP points to the "iret" frame.
+	 * That will either return for real or it will loop back into NMI
+	 * processing.
+	 *
+	 * The "outermost" frame is copied to the "iret" frame on each
+	 * iteration of the loop, so each iteration starts with the "iret"
+	 * frame pointing to the final return target.
+	 */
+
+	/*
+	 * Determine whether we're a nested NMI.
+	 *
+	 * If we interrupted kernel code between repeat_nmi and
+	 * end_repeat_nmi, then we are a nested NMI.  We must not
+	 * modify the "iret" frame because it's being written by
+	 * the outer NMI.  That's okay; the outer NMI handler is
+	 * about to about to call do_nmi anyway, so we can just
+	 * resume the outer NMI.
+	 */
+
+	movq	$repeat_nmi, %rdx
+	cmpq	8(%rsp), %rdx
+	ja	1f
+	movq	$end_repeat_nmi, %rdx
+	cmpq	8(%rsp), %rdx
+	ja	nested_nmi_out
+1:
+
+	/*
+	 * Now check "NMI executing".  If it's set, then we're nested.
+	 * This will not detect if we interrupted an outer NMI just
+	 * before IRET.
 	 */
 	cmpl	$1, -8(%rsp)
 	je	nested_nmi
 
 	/*
-	 * Now test if the previous stack was an NMI stack.
-	 * We need the double check. We check the NMI stack to satisfy the
-	 * race when the first NMI clears the variable before returning.
-	 * We check the variable because the first NMI could be in a
-	 * breakpoint routine using a breakpoint stack.
+	 * Now test if the previous stack was an NMI stack.  This covers
+	 * the case where we interrupt an outer NMI after it clears
+	 * "NMI executing" but before IRET.  We need to be careful, though:
+	 * there is one case in which RSP could point to the NMI stack
+	 * despite there being no NMI active: naughty userspace controls
+	 * RSP at the very beginning of the SYSCALL targets.  We can
+	 * pull a fast one on naughty userspace, though: we program
+	 * SYSCALL to mask DF, so userspace cannot cause DF to be set
+	 * if it controls the kernel's RSP.  We set DF before we clear
+	 * "NMI executing".
 	 */
 	lea	6*8(%rsp), %rdx
 	/* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
@@ -1286,25 +1407,20 @@
 	cmpq	%rdx, 4*8(%rsp)
 	/* If it is below the NMI stack, it is a normal NMI */
 	jb	first_nmi
-	/* Ah, it is within the NMI stack, treat it as nested */
+
+	/* Ah, it is within the NMI stack. */
+
+	testb	$(X86_EFLAGS_DF >> 8), (3*8 + 1)(%rsp)
+	jz	first_nmi	/* RSP was user controlled. */
+
+	/* This is a nested NMI. */
 
 nested_nmi:
 	/*
-	 * Do nothing if we interrupted the fixup in repeat_nmi.
-	 * It's about to repeat the NMI handler, so we are fine
-	 * with ignoring this one.
+	 * Modify the "iret" frame to point to repeat_nmi, forcing another
+	 * iteration of NMI handling.
 	 */
-	movq	$repeat_nmi, %rdx
-	cmpq	8(%rsp), %rdx
-	ja	1f
-	movq	$end_repeat_nmi, %rdx
-	cmpq	8(%rsp), %rdx
-	ja	nested_nmi_out
-
-1:
-	/* Set up the interrupted NMIs stack to jump to repeat_nmi */
-	leaq	-1*8(%rsp), %rdx
-	movq	%rdx, %rsp
+	subq	$8, %rsp
 	leaq	-10*8(%rsp), %rdx
 	pushq	$__KERNEL_DS
 	pushq	%rdx
@@ -1318,61 +1434,42 @@
 nested_nmi_out:
 	popq	%rdx
 
-	/* No need to check faults here */
+	/* We are returning to kernel mode, so this cannot result in a fault. */
 	INTERRUPT_RETURN
 
 first_nmi:
-	/*
-	 * Because nested NMIs will use the pushed location that we
-	 * stored in rdx, we must keep that space available.
-	 * Here's what our stack frame will look like:
-	 * +-------------------------+
-	 * | original SS             |
-	 * | original Return RSP     |
-	 * | original RFLAGS         |
-	 * | original CS             |
-	 * | original RIP            |
-	 * +-------------------------+
-	 * | temp storage for rdx    |
-	 * +-------------------------+
-	 * | NMI executing variable  |
-	 * +-------------------------+
-	 * | copied SS               |
-	 * | copied Return RSP       |
-	 * | copied RFLAGS           |
-	 * | copied CS               |
-	 * | copied RIP              |
-	 * +-------------------------+
-	 * | Saved SS                |
-	 * | Saved Return RSP        |
-	 * | Saved RFLAGS            |
-	 * | Saved CS                |
-	 * | Saved RIP               |
-	 * +-------------------------+
-	 * | pt_regs                 |
-	 * +-------------------------+
-	 *
-	 * The saved stack frame is used to fix up the copied stack frame
-	 * that a nested NMI may change to make the interrupted NMI iret jump
-	 * to the repeat_nmi. The original stack frame and the temp storage
-	 * is also used by nested NMIs and can not be trusted on exit.
-	 */
-	/* Do not pop rdx, nested NMIs will corrupt that part of the stack */
+	/* Restore rdx. */
 	movq	(%rsp), %rdx
 
-	/* Set the NMI executing variable on the stack. */
-	pushq	$1
+	/* Make room for "NMI executing". */
+	pushq	$0
 
-	/* Leave room for the "copied" frame */
+	/* Leave room for the "iret" frame */
 	subq	$(5*8), %rsp
 
-	/* Copy the stack frame to the Saved frame */
+	/* Copy the "original" frame to the "outermost" frame */
 	.rept 5
 	pushq	11*8(%rsp)
 	.endr
 
 	/* Everything up to here is safe from nested NMIs */
 
+#ifdef CONFIG_DEBUG_ENTRY
+	/*
+	 * For ease of testing, unmask NMIs right away.  Disabled by
+	 * default because IRET is very expensive.
+	 */
+	pushq	$0		/* SS */
+	pushq	%rsp		/* RSP (minus 8 because of the previous push) */
+	addq	$8, (%rsp)	/* Fix up RSP */
+	pushfq			/* RFLAGS */
+	pushq	$__KERNEL_CS	/* CS */
+	pushq	$1f		/* RIP */
+	INTERRUPT_RETURN	/* continues at repeat_nmi below */
+1:
+#endif
+
+repeat_nmi:
 	/*
 	 * If there was a nested NMI, the first NMI's iret will return
 	 * here. But NMIs are still enabled and we can take another
@@ -1381,16 +1478,20 @@
 	 * it will just return, as we are about to repeat an NMI anyway.
 	 * This makes it safe to copy to the stack frame that a nested
 	 * NMI will update.
+	 *
+	 * RSP is pointing to "outermost RIP".  gsbase is unknown, but, if
+	 * we're repeating an NMI, gsbase has the same value that it had on
+	 * the first iteration.  paranoid_entry will load the kernel
+	 * gsbase if needed before we call do_nmi.  "NMI executing"
+	 * is zero.
 	 */
-repeat_nmi:
-	/*
-	 * Update the stack variable to say we are still in NMI (the update
-	 * is benign for the non-repeat case, where 1 was pushed just above
-	 * to this very stack slot).
-	 */
-	movq	$1, 10*8(%rsp)
+	movq	$1, 10*8(%rsp)		/* Set "NMI executing". */
 
-	/* Make another copy, this one may be modified by nested NMIs */
+	/*
+	 * Copy the "outermost" frame to the "iret" frame.  NMIs that nest
+	 * here must not modify the "iret" frame while we're writing to
+	 * it or it will end up containing garbage.
+	 */
 	addq	$(10*8), %rsp
 	.rept 5
 	pushq	-6*8(%rsp)
@@ -1399,9 +1500,9 @@
 end_repeat_nmi:
 
 	/*
-	 * Everything below this point can be preempted by a nested
-	 * NMI if the first NMI took an exception and reset our iret stack
-	 * so that we repeat another NMI.
+	 * Everything below this point can be preempted by a nested NMI.
+	 * If this happens, then the inner NMI will change the "iret"
+	 * frame to point back to repeat_nmi.
 	 */
 	pushq	$-1				/* ORIG_RAX: no syscall to restart */
 	ALLOC_PT_GPREGS_ON_STACK
@@ -1415,28 +1516,11 @@
 	 */
 	call	paranoid_entry
 
-	/*
-	 * Save off the CR2 register. If we take a page fault in the NMI then
-	 * it could corrupt the CR2 value. If the NMI preempts a page fault
-	 * handler before it was able to read the CR2 register, and then the
-	 * NMI itself takes a page fault, the page fault that was preempted
-	 * will read the information from the NMI page fault and not the
-	 * origin fault. Save it off and restore it if it changes.
-	 * Use the r12 callee-saved register.
-	 */
-	movq	%cr2, %r12
-
 	/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
 	movq	%rsp, %rdi
 	movq	$-1, %rsi
 	call	do_nmi
 
-	/* Did the NMI take a page fault? Restore cr2 if it did */
-	movq	%cr2, %rcx
-	cmpq	%rcx, %r12
-	je	1f
-	movq	%r12, %cr2
-1:
 	testl	%ebx, %ebx			/* swapgs needed? */
 	jnz	nmi_restore
 nmi_swapgs:
@@ -1444,11 +1528,26 @@
 nmi_restore:
 	RESTORE_EXTRA_REGS
 	RESTORE_C_REGS
-	/* Pop the extra iret frame at once */
+
+	/* Point RSP at the "iret" frame. */
 	REMOVE_PT_GPREGS_FROM_STACK 6*8
 
-	/* Clear the NMI executing stack variable */
-	movq	$0, 5*8(%rsp)
+	/*
+	 * Clear "NMI executing".  Set DF first so that we can easily
+	 * distinguish the remaining code between here and IRET from
+	 * the SYSCALL entry and exit paths.  On a native kernel, we
+	 * could just inspect RIP, but, on paravirt kernels,
+	 * INTERRUPT_RETURN can translate into a jump into a
+	 * hypercall page.
+	 */
+	std
+	movq	$0, 5*8(%rsp)		/* clear "NMI executing" */
+
+	/*
+	 * INTERRUPT_RETURN reads the "iret" frame and exits the NMI
+	 * stack in a single instruction.  We are returning to kernel
+	 * mode, so this cannot result in a fault.
+	 */
 	INTERRUPT_RETURN
 END(nmi)
 
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index bb187a6..5a18447 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -205,7 +205,6 @@
 	movl	RDX(%rsp), %edx		/* arg3 */
 	movl	RSI(%rsp), %ecx		/* arg4 */
 	movl	RDI(%rsp), %r8d		/* arg5 */
-	movl	%ebp, %r9d		/* arg6 */
 	.endm
 
 	.macro auditsys_exit exit
@@ -236,6 +235,7 @@
 
 sysenter_auditsys:
 	auditsys_entry_common
+	movl	%ebp, %r9d		/* reload 6th syscall arg */
 	jmp	sysenter_dispatch
 
 sysexit_audit:
@@ -336,7 +336,7 @@
 	 * 32-bit zero extended:
 	 */
 	ASM_STAC
-1:	movl	(%r8), %ebp
+1:	movl	(%r8), %r9d
 	_ASM_EXTABLE(1b, ia32_badarg)
 	ASM_CLAC
 	orl	$TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
@@ -346,7 +346,7 @@
 cstar_do_call:
 	/* 32-bit syscall -> 64-bit C ABI argument conversion */
 	movl	%edi, %r8d		/* arg5 */
-	movl	%ebp, %r9d		/* arg6 */
+	/* r9 already loaded */		/* arg6 */
 	xchg	%ecx, %esi		/* rsi:arg2, rcx:arg4 */
 	movl	%ebx, %edi		/* arg1 */
 	movl	%edx, %edx		/* arg3 (zero extension) */
@@ -358,7 +358,6 @@
 	call	*ia32_sys_call_table(, %rax, 8)
 	movq	%rax, RAX(%rsp)
 1:
-	movl	RCX(%rsp), %ebp
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl	$_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
@@ -392,7 +391,9 @@
 
 #ifdef CONFIG_AUDITSYSCALL
 cstar_auditsys:
+	movl	%r9d, R9(%rsp)		/* register to be clobbered by call */
 	auditsys_entry_common
+	movl	R9(%rsp), %r9d		/* reload 6th syscall arg */
 	jmp	cstar_dispatch
 
 sysretl_audit:
@@ -404,14 +405,16 @@
 	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
 	jz	cstar_auditsys
 #endif
+	xchgl	%r9d, %ebp
 	SAVE_EXTRA_REGS
 	xorl	%eax, %eax		/* Do not leak kernel information */
 	movq	%rax, R11(%rsp)
 	movq	%rax, R10(%rsp)
-	movq	%rax, R9(%rsp)
+	movq	%r9, R9(%rsp)
 	movq	%rax, R8(%rsp)
 	movq	%rsp, %rdi		/* &pt_regs -> arg1 */
 	call	syscall_trace_enter
+	movl	R9(%rsp), %r9d
 
 	/* Reload arg registers from stack. (see sysenter_tracesys) */
 	movl	RCX(%rsp), %ecx
@@ -421,6 +424,7 @@
 	movl	%eax, %eax		/* zero extension */
 
 	RESTORE_EXTRA_REGS
+	xchgl	%ebp, %r9d
 	jmp	cstar_do_call
 END(entry_SYSCALL_compat)
 
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index 4dd1f2d..aeac434 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -9,3 +9,4 @@
 generic-y += dma-contiguous.h
 generic-y += early_ioremap.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
diff --git a/arch/x86/include/asm/fpu/types.h b/arch/x86/include/asm/fpu/types.h
index 0637826..c49c517 100644
--- a/arch/x86/include/asm/fpu/types.h
+++ b/arch/x86/include/asm/fpu/types.h
@@ -189,6 +189,7 @@
 	struct fxregs_state		fxsave;
 	struct swregs_state		soft;
 	struct xregs_state		xsave;
+	u8 __padding[PAGE_SIZE];
 };
 
 /*
@@ -198,40 +199,6 @@
  */
 struct fpu {
 	/*
-	 * @state:
-	 *
-	 * In-memory copy of all FPU registers that we save/restore
-	 * over context switches. If the task is using the FPU then
-	 * the registers in the FPU are more recent than this state
-	 * copy. If the task context-switches away then they get
-	 * saved here and represent the FPU state.
-	 *
-	 * After context switches there may be a (short) time period
-	 * during which the in-FPU hardware registers are unchanged
-	 * and still perfectly match this state, if the tasks
-	 * scheduled afterwards are not using the FPU.
-	 *
-	 * This is the 'lazy restore' window of optimization, which
-	 * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'.
-	 *
-	 * We detect whether a subsequent task uses the FPU via setting
-	 * CR0::TS to 1, which causes any FPU use to raise a #NM fault.
-	 *
-	 * During this window, if the task gets scheduled again, we
-	 * might be able to skip having to do a restore from this
-	 * memory buffer to the hardware registers - at the cost of
-	 * incurring the overhead of #NM fault traps.
-	 *
-	 * Note that on modern CPUs that support the XSAVEOPT (or other
-	 * optimized XSAVE instructions), we don't use #NM traps anymore,
-	 * as the hardware can track whether FPU registers need saving
-	 * or not. On such CPUs we activate the non-lazy ('eagerfpu')
-	 * logic, which unconditionally saves/restores all FPU state
-	 * across context switches. (if FPU state exists.)
-	 */
-	union fpregs_state		state;
-
-	/*
 	 * @last_cpu:
 	 *
 	 * Records the last CPU on which this context was loaded into
@@ -288,6 +255,43 @@
 	 * deal with bursty apps that only use the FPU for a short time:
 	 */
 	unsigned char			counter;
+	/*
+	 * @state:
+	 *
+	 * In-memory copy of all FPU registers that we save/restore
+	 * over context switches. If the task is using the FPU then
+	 * the registers in the FPU are more recent than this state
+	 * copy. If the task context-switches away then they get
+	 * saved here and represent the FPU state.
+	 *
+	 * After context switches there may be a (short) time period
+	 * during which the in-FPU hardware registers are unchanged
+	 * and still perfectly match this state, if the tasks
+	 * scheduled afterwards are not using the FPU.
+	 *
+	 * This is the 'lazy restore' window of optimization, which
+	 * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'.
+	 *
+	 * We detect whether a subsequent task uses the FPU via setting
+	 * CR0::TS to 1, which causes any FPU use to raise a #NM fault.
+	 *
+	 * During this window, if the task gets scheduled again, we
+	 * might be able to skip having to do a restore from this
+	 * memory buffer to the hardware registers - at the cost of
+	 * incurring the overhead of #NM fault traps.
+	 *
+	 * Note that on modern CPUs that support the XSAVEOPT (or other
+	 * optimized XSAVE instructions), we don't use #NM traps anymore,
+	 * as the hardware can track whether FPU registers need saving
+	 * or not. On such CPUs we activate the non-lazy ('eagerfpu')
+	 * logic, which unconditionally saves/restores all FPU state
+	 * across context switches. (if FPU state exists.)
+	 */
+	union fpregs_state		state;
+	/*
+	 * WARNING: 'state' is dynamically-sized.  Do not put
+	 * anything after it here.
+	 */
 };
 
 #endif /* _ASM_X86_FPU_H */
diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
index 200ec2e..cd0310e 100644
--- a/arch/x86/include/asm/intel_pmc_ipc.h
+++ b/arch/x86/include/asm/intel_pmc_ipc.h
@@ -25,36 +25,9 @@
 
 #if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
 
-/*
- * intel_pmc_ipc_simple_command
- * @cmd: command
- * @sub: sub type
- */
 int intel_pmc_ipc_simple_command(int cmd, int sub);
-
-/*
- * intel_pmc_ipc_raw_cmd
- * @cmd: command
- * @sub: sub type
- * @in: input data
- * @inlen: input length in bytes
- * @out: output data
- * @outlen: output length in dwords
- * @sptr: data writing to SPTR register
- * @dptr: data writing to DPTR register
- */
 int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen,
 		u32 *out, u32 outlen, u32 dptr, u32 sptr);
-
-/*
- * intel_pmc_ipc_command
- * @cmd: command
- * @sub: sub type
- * @in: input data
- * @inlen: input length in bytes
- * @out: output data
- * @outlen: output length in dwords
- */
 int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
 		u32 *out, u32 outlen);
 
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 2a7f5d7..49ec903 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -604,6 +604,8 @@
 	bool iommu_noncoherent;
 #define __KVM_HAVE_ARCH_NONCOHERENT_DMA
 	atomic_t noncoherent_dma_count;
+#define __KVM_HAVE_ARCH_ASSIGNED_DEVICE
+	atomic_t assigned_device_count;
 	struct kvm_pic *vpic;
 	struct kvm_ioapic *vioapic;
 	struct kvm_pit *vpit;
diff --git a/arch/x86/include/asm/mm-arch-hooks.h b/arch/x86/include/asm/mm-arch-hooks.h
deleted file mode 100644
index 4e881a3..0000000
--- a/arch/x86/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_X86_MM_ARCH_HOOKS_H
-#define _ASM_X86_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_X86_MM_ARCH_HOOKS_H */
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 5e8daee..804a3a6 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -23,7 +23,7 @@
 
 static inline void load_mm_cr4(struct mm_struct *mm)
 {
-	if (static_key_true(&rdpmc_always_available) ||
+	if (static_key_false(&rdpmc_always_available) ||
 	    atomic_read(&mm->context.perf_rdpmc_allowed))
 		cr4_set_bits(X86_CR4_PCE);
 	else
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 43e6519..944f178 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -390,9 +390,6 @@
 #endif
 	unsigned long		gs;
 
-	/* Floating point and extended processor state */
-	struct fpu		fpu;
-
 	/* Save middle states of ptrace breakpoints */
 	struct perf_event	*ptrace_bps[HBP_NUM];
 	/* Debug status used for traps, single steps, etc... */
@@ -418,6 +415,13 @@
 	unsigned long		iopl;
 	/* Max allowed port in the bitmap, in bytes: */
 	unsigned		io_bitmap_max;
+
+	/* Floating point and extended processor state */
+	struct fpu		fpu;
+	/*
+	 * WARNING: 'fpu' is dynamically-sized.  It *MUST* be at
+	 * the end.
+	 */
 };
 
 /*
diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
index 8fba544..f36d56b 100644
--- a/arch/x86/include/uapi/asm/hyperv.h
+++ b/arch/x86/include/uapi/asm/hyperv.h
@@ -108,6 +108,8 @@
 #define HV_X64_HYPERCALL_PARAMS_XMM_AVAILABLE		(1 << 4)
 /* Support for a virtual guest idle state is available */
 #define HV_X64_GUEST_IDLE_STATE_AVAILABLE		(1 << 5)
+/* Guest crash data handler available */
+#define HV_X64_GUEST_CRASH_MSR_AVAILABLE		(1 << 10)
 
 /*
  * Implementation recommendations. Indicates which behaviors the hypervisor
diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h
index a4ae82e..cd54147 100644
--- a/arch/x86/include/uapi/asm/kvm.h
+++ b/arch/x86/include/uapi/asm/kvm.h
@@ -354,7 +354,7 @@
 struct kvm_sync_regs {
 };
 
-#define KVM_QUIRK_LINT0_REENABLED	(1 << 0)
-#define KVM_QUIRK_CD_NW_CLEARED		(1 << 1)
+#define KVM_X86_QUIRK_LINT0_REENABLED	(1 << 0)
+#define KVM_X86_QUIRK_CD_NW_CLEARED	(1 << 1)
 
 #endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/kernel/cpu/perf_event_intel_cqm.c b/arch/x86/kernel/cpu/perf_event_intel_cqm.c
index 1880761..63eb68b 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_cqm.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_cqm.c
@@ -952,6 +952,14 @@
 		return 0;
 
 	/*
+	 * Getting up-to-date values requires an SMP IPI which is not
+	 * possible if we're being called in interrupt context. Return
+	 * the cached values instead.
+	 */
+	if (unlikely(in_interrupt()))
+		goto out;
+
+	/*
 	 * Notice that we don't perform the reading of an RMID
 	 * atomically, because we can't hold a spin lock across the
 	 * IPIs.
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index 3282679..1e173f6 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -4,6 +4,8 @@
 #include <asm/fpu/internal.h>
 #include <asm/tlbflush.h>
 
+#include <linux/sched.h>
+
 /*
  * Initialize the TS bit in CR0 according to the style of context-switches
  * we are using:
@@ -136,6 +138,43 @@
 unsigned int xstate_size;
 EXPORT_SYMBOL_GPL(xstate_size);
 
+/* Enforce that 'MEMBER' is the last field of 'TYPE': */
+#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \
+	BUILD_BUG_ON(sizeof(TYPE) != offsetofend(TYPE, MEMBER))
+
+/*
+ * We append the 'struct fpu' to the task_struct:
+ */
+static void __init fpu__init_task_struct_size(void)
+{
+	int task_size = sizeof(struct task_struct);
+
+	/*
+	 * Subtract off the static size of the register state.
+	 * It potentially has a bunch of padding.
+	 */
+	task_size -= sizeof(((struct task_struct *)0)->thread.fpu.state);
+
+	/*
+	 * Add back the dynamically-calculated register state
+	 * size.
+	 */
+	task_size += xstate_size;
+
+	/*
+	 * We dynamically size 'struct fpu', so we require that
+	 * it be at the end of 'thread_struct' and that
+	 * 'thread_struct' be at the end of 'task_struct'.  If
+	 * you hit a compile error here, check the structure to
+	 * see if something got added to the end.
+	 */
+	CHECK_MEMBER_AT_END_OF(struct fpu, state);
+	CHECK_MEMBER_AT_END_OF(struct thread_struct, fpu);
+	CHECK_MEMBER_AT_END_OF(struct task_struct, thread);
+
+	arch_task_struct_size = task_size;
+}
+
 /*
  * Set up the xstate_size based on the legacy FPU context size.
  *
@@ -287,6 +326,7 @@
 	fpu__init_system_generic();
 	fpu__init_system_xstate_size_legacy();
 	fpu__init_system_xstate();
+	fpu__init_task_struct_size();
 
 	fpu__init_system_ctx_switch();
 }
@@ -311,9 +351,15 @@
 
 	setup_clear_cpu_cap(X86_FEATURE_XSAVE);
 	setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
+	setup_clear_cpu_cap(X86_FEATURE_XSAVEC);
 	setup_clear_cpu_cap(X86_FEATURE_XSAVES);
 	setup_clear_cpu_cap(X86_FEATURE_AVX);
 	setup_clear_cpu_cap(X86_FEATURE_AVX2);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512F);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512PF);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512ER);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512CD);
+	setup_clear_cpu_cap(X86_FEATURE_MPX);
 
 	return 1;
 }
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index c3e985d..d05bd2e 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -408,15 +408,15 @@
 NOKPROBE_SYMBOL(default_do_nmi);
 
 /*
- * NMIs can hit breakpoints which will cause it to lose its
- * NMI context with the CPU when the breakpoint does an iret.
- */
-#ifdef CONFIG_X86_32
-/*
- * For i386, NMIs use the same stack as the kernel, and we can
- * add a workaround to the iret problem in C (preventing nested
- * NMIs if an NMI takes a trap). Simply have 3 states the NMI
- * can be in:
+ * NMIs can page fault or hit breakpoints which will cause it to lose
+ * its NMI context with the CPU when the breakpoint or page fault does an IRET.
+ *
+ * As a result, NMIs can nest if NMIs get unmasked due an IRET during
+ * NMI processing.  On x86_64, the asm glue protects us from nested NMIs
+ * if the outer NMI came from kernel mode, but we can still nest if the
+ * outer NMI came from user mode.
+ *
+ * To handle these nested NMIs, we have three states:
  *
  *  1) not running
  *  2) executing
@@ -430,15 +430,14 @@
  * (Note, the latch is binary, thus multiple NMIs triggering,
  *  when one is running, are ignored. Only one NMI is restarted.)
  *
- * If an NMI hits a breakpoint that executes an iret, another
- * NMI can preempt it. We do not want to allow this new NMI
- * to run, but we want to execute it when the first one finishes.
- * We set the state to "latched", and the exit of the first NMI will
- * perform a dec_return, if the result is zero (NOT_RUNNING), then
- * it will simply exit the NMI handler. If not, the dec_return
- * would have set the state to NMI_EXECUTING (what we want it to
- * be when we are running). In this case, we simply jump back
- * to rerun the NMI handler again, and restart the 'latched' NMI.
+ * If an NMI executes an iret, another NMI can preempt it. We do not
+ * want to allow this new NMI to run, but we want to execute it when the
+ * first one finishes.  We set the state to "latched", and the exit of
+ * the first NMI will perform a dec_return, if the result is zero
+ * (NOT_RUNNING), then it will simply exit the NMI handler. If not, the
+ * dec_return would have set the state to NMI_EXECUTING (what we want it
+ * to be when we are running). In this case, we simply jump back to
+ * rerun the NMI handler again, and restart the 'latched' NMI.
  *
  * No trap (breakpoint or page fault) should be hit before nmi_restart,
  * thus there is no race between the first check of state for NOT_RUNNING
@@ -461,49 +460,36 @@
 static DEFINE_PER_CPU(enum nmi_states, nmi_state);
 static DEFINE_PER_CPU(unsigned long, nmi_cr2);
 
-#define nmi_nesting_preprocess(regs)					\
-	do {								\
-		if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) {	\
-			this_cpu_write(nmi_state, NMI_LATCHED);		\
-			return;						\
-		}							\
-		this_cpu_write(nmi_state, NMI_EXECUTING);		\
-		this_cpu_write(nmi_cr2, read_cr2());			\
-	} while (0);							\
-	nmi_restart:
-
-#define nmi_nesting_postprocess()					\
-	do {								\
-		if (unlikely(this_cpu_read(nmi_cr2) != read_cr2()))	\
-			write_cr2(this_cpu_read(nmi_cr2));		\
-		if (this_cpu_dec_return(nmi_state))			\
-			goto nmi_restart;				\
-	} while (0)
-#else /* x86_64 */
+#ifdef CONFIG_X86_64
 /*
- * In x86_64 things are a bit more difficult. This has the same problem
- * where an NMI hitting a breakpoint that calls iret will remove the
- * NMI context, allowing a nested NMI to enter. What makes this more
- * difficult is that both NMIs and breakpoints have their own stack.
- * When a new NMI or breakpoint is executed, the stack is set to a fixed
- * point. If an NMI is nested, it will have its stack set at that same
- * fixed address that the first NMI had, and will start corrupting the
- * stack. This is handled in entry_64.S, but the same problem exists with
- * the breakpoint stack.
+ * In x86_64, we need to handle breakpoint -> NMI -> breakpoint.  Without
+ * some care, the inner breakpoint will clobber the outer breakpoint's
+ * stack.
  *
- * If a breakpoint is being processed, and the debug stack is being used,
- * if an NMI comes in and also hits a breakpoint, the stack pointer
- * will be set to the same fixed address as the breakpoint that was
- * interrupted, causing that stack to be corrupted. To handle this case,
- * check if the stack that was interrupted is the debug stack, and if
- * so, change the IDT so that new breakpoints will use the current stack
- * and not switch to the fixed address. On return of the NMI, switch back
- * to the original IDT.
+ * If a breakpoint is being processed, and the debug stack is being
+ * used, if an NMI comes in and also hits a breakpoint, the stack
+ * pointer will be set to the same fixed address as the breakpoint that
+ * was interrupted, causing that stack to be corrupted. To handle this
+ * case, check if the stack that was interrupted is the debug stack, and
+ * if so, change the IDT so that new breakpoints will use the current
+ * stack and not switch to the fixed address. On return of the NMI,
+ * switch back to the original IDT.
  */
 static DEFINE_PER_CPU(int, update_debug_stack);
+#endif
 
-static inline void nmi_nesting_preprocess(struct pt_regs *regs)
+dotraplinkage notrace void
+do_nmi(struct pt_regs *regs, long error_code)
 {
+	if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) {
+		this_cpu_write(nmi_state, NMI_LATCHED);
+		return;
+	}
+	this_cpu_write(nmi_state, NMI_EXECUTING);
+	this_cpu_write(nmi_cr2, read_cr2());
+nmi_restart:
+
+#ifdef CONFIG_X86_64
 	/*
 	 * If we interrupted a breakpoint, it is possible that
 	 * the nmi handler will have breakpoints too. We need to
@@ -514,22 +500,8 @@
 		debug_stack_set_zero();
 		this_cpu_write(update_debug_stack, 1);
 	}
-}
-
-static inline void nmi_nesting_postprocess(void)
-{
-	if (unlikely(this_cpu_read(update_debug_stack))) {
-		debug_stack_reset();
-		this_cpu_write(update_debug_stack, 0);
-	}
-}
 #endif
 
-dotraplinkage notrace void
-do_nmi(struct pt_regs *regs, long error_code)
-{
-	nmi_nesting_preprocess(regs);
-
 	nmi_enter();
 
 	inc_irq_stat(__nmi_count);
@@ -539,8 +511,17 @@
 
 	nmi_exit();
 
-	/* On i386, may loop back to preprocess */
-	nmi_nesting_postprocess();
+#ifdef CONFIG_X86_64
+	if (unlikely(this_cpu_read(update_debug_stack))) {
+		debug_stack_reset();
+		this_cpu_write(update_debug_stack, 0);
+	}
+#endif
+
+	if (unlikely(this_cpu_read(nmi_cr2) != read_cr2()))
+		write_cr2(this_cpu_read(nmi_cr2));
+	if (this_cpu_dec_return(nmi_state))
+		goto nmi_restart;
 }
 NOKPROBE_SYMBOL(do_nmi);
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 9cad694..397688b 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -81,7 +81,7 @@
  */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-	*dst = *src;
+	memcpy(dst, src, arch_task_struct_size);
 
 	return fpu__copy(&dst->thread.fpu, &src->thread.fpu);
 }
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index d3010aa..b1f3ed9c 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -992,8 +992,17 @@
 
 	common_cpu_up(cpu, tidle);
 
+	/*
+	 * We have to walk the irq descriptors to setup the vector
+	 * space for the cpu which comes online.  Prevent irq
+	 * alloc/free across the bringup.
+	 */
+	irq_lock_sparse();
+
 	err = do_boot_cpu(apicid, cpu, tidle);
+
 	if (err) {
+		irq_unlock_sparse();
 		pr_err("do_boot_cpu failed(%d) to wakeup CPU#%u\n", err, cpu);
 		return -EIO;
 	}
@@ -1011,6 +1020,8 @@
 		touch_nmi_watchdog();
 	}
 
+	irq_unlock_sparse();
+
 	return 0;
 }
 
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 64dd467..2fbea25 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -98,6 +98,8 @@
 		best->ebx = xstate_required_size(vcpu->arch.xcr0, true);
 
 	vcpu->arch.eager_fpu = use_eager_fpu() || guest_cpuid_has_mpx(vcpu);
+	if (vcpu->arch.eager_fpu)
+		kvm_x86_ops->fpu_activate(vcpu);
 
 	/*
 	 * The existing code assumes virtual address is 48-bit in the canonical
diff --git a/arch/x86/kvm/iommu.c b/arch/x86/kvm/iommu.c
index 7dbced3..5c520eb 100644
--- a/arch/x86/kvm/iommu.c
+++ b/arch/x86/kvm/iommu.c
@@ -200,6 +200,7 @@
 			goto out_unmap;
 	}
 
+	kvm_arch_start_assignment(kvm);
 	pci_set_dev_assigned(pdev);
 
 	dev_info(&pdev->dev, "kvm assign device\n");
@@ -224,6 +225,7 @@
 	iommu_detach_device(domain, &pdev->dev);
 
 	pci_clear_dev_assigned(pdev);
+	kvm_arch_end_assignment(kvm);
 
 	dev_info(&pdev->dev, "kvm deassign device\n");
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 954e98a..2a5ca97 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1595,7 +1595,7 @@
 	for (i = 0; i < APIC_LVT_NUM; i++)
 		apic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED);
 	apic_update_lvtt(apic);
-	if (!(vcpu->kvm->arch.disabled_quirks & KVM_QUIRK_LINT0_REENABLED))
+	if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_LINT0_REENABLED))
 		apic_set_reg(apic, APIC_LVT0,
 			     SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT));
 	apic_manage_nmi_watchdog(apic, kvm_apic_get_reg(apic, APIC_LVT0));
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index f807496..4417146 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2479,6 +2479,14 @@
 	return 0;
 }
 
+static bool kvm_is_mmio_pfn(pfn_t pfn)
+{
+	if (pfn_valid(pfn))
+		return !is_zero_pfn(pfn) && PageReserved(pfn_to_page(pfn));
+
+	return true;
+}
+
 static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		    unsigned pte_access, int level,
 		    gfn_t gfn, pfn_t pfn, bool speculative,
@@ -2506,7 +2514,7 @@
 		spte |= PT_PAGE_SIZE_MASK;
 	if (tdp_enabled)
 		spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
-			kvm_is_reserved_pfn(pfn));
+			kvm_is_mmio_pfn(pfn));
 
 	if (host_writable)
 		spte |= SPTE_HOST_WRITEABLE;
diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c
index de1d2d8..dc0a84a 100644
--- a/arch/x86/kvm/mtrr.c
+++ b/arch/x86/kvm/mtrr.c
@@ -120,6 +120,16 @@
 	return mtrr_state->deftype & IA32_MTRR_DEF_TYPE_TYPE_MASK;
 }
 
+static u8 mtrr_disabled_type(void)
+{
+	/*
+	 * Intel SDM 11.11.2.2: all MTRRs are disabled when
+	 * IA32_MTRR_DEF_TYPE.E bit is cleared, and the UC
+	 * memory type is applied to all of physical memory.
+	 */
+	return MTRR_TYPE_UNCACHABLE;
+}
+
 /*
 * Three terms are used in the following code:
 * - segment, it indicates the address segments covered by fixed MTRRs.
@@ -434,6 +444,8 @@
 
 	/* output fields. */
 	int mem_type;
+	/* mtrr is completely disabled? */
+	bool mtrr_disabled;
 	/* [start, end) is not fully covered in MTRRs? */
 	bool partial_map;
 
@@ -549,7 +561,7 @@
 static void mtrr_lookup_start(struct mtrr_iter *iter)
 {
 	if (!mtrr_is_enabled(iter->mtrr_state)) {
-		iter->partial_map = true;
+		iter->mtrr_disabled = true;
 		return;
 	}
 
@@ -563,6 +575,7 @@
 	iter->mtrr_state = mtrr_state;
 	iter->start = start;
 	iter->end = end;
+	iter->mtrr_disabled = false;
 	iter->partial_map = false;
 	iter->fixed = false;
 	iter->range = NULL;
@@ -656,15 +669,19 @@
 		return MTRR_TYPE_WRBACK;
 	}
 
-	/* It is not covered by MTRRs. */
-	if (iter.partial_map) {
-		/*
-		 * We just check one page, partially covered by MTRRs is
-		 * impossible.
-		 */
-		WARN_ON(type != -1);
-		type = mtrr_default_type(mtrr_state);
-	}
+	if (iter.mtrr_disabled)
+		return mtrr_disabled_type();
+
+	/*
+	 * We just check one page, partially covered by MTRRs is
+	 * impossible.
+	 */
+	WARN_ON(iter.partial_map);
+
+	/* not contained in any MTRRs. */
+	if (type == -1)
+		return mtrr_default_type(mtrr_state);
+
 	return type;
 }
 EXPORT_SYMBOL_GPL(kvm_mtrr_get_guest_memory_type);
@@ -689,6 +706,9 @@
 			return false;
 	}
 
+	if (iter.mtrr_disabled)
+		return true;
+
 	if (!iter.partial_map)
 		return true;
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 602b974..8e0c084 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -865,6 +865,64 @@
 	set_msr_interception(msrpm, MSR_IA32_LASTINTTOIP, 0, 0);
 }
 
+#define MTRR_TYPE_UC_MINUS	7
+#define MTRR2PROTVAL_INVALID 0xff
+
+static u8 mtrr2protval[8];
+
+static u8 fallback_mtrr_type(int mtrr)
+{
+	/*
+	 * WT and WP aren't always available in the host PAT.  Treat
+	 * them as UC and UC- respectively.  Everything else should be
+	 * there.
+	 */
+	switch (mtrr)
+	{
+	case MTRR_TYPE_WRTHROUGH:
+		return MTRR_TYPE_UNCACHABLE;
+	case MTRR_TYPE_WRPROT:
+		return MTRR_TYPE_UC_MINUS;
+	default:
+		BUG();
+	}
+}
+
+static void build_mtrr2protval(void)
+{
+	int i;
+	u64 pat;
+
+	for (i = 0; i < 8; i++)
+		mtrr2protval[i] = MTRR2PROTVAL_INVALID;
+
+	/* Ignore the invalid MTRR types.  */
+	mtrr2protval[2] = 0;
+	mtrr2protval[3] = 0;
+
+	/*
+	 * Use host PAT value to figure out the mapping from guest MTRR
+	 * values to nested page table PAT/PCD/PWT values.  We do not
+	 * want to change the host PAT value every time we enter the
+	 * guest.
+	 */
+	rdmsrl(MSR_IA32_CR_PAT, pat);
+	for (i = 0; i < 8; i++) {
+		u8 mtrr = pat >> (8 * i);
+
+		if (mtrr2protval[mtrr] == MTRR2PROTVAL_INVALID)
+			mtrr2protval[mtrr] = __cm_idx2pte(i);
+	}
+
+	for (i = 0; i < 8; i++) {
+		if (mtrr2protval[i] == MTRR2PROTVAL_INVALID) {
+			u8 fallback = fallback_mtrr_type(i);
+			mtrr2protval[i] = mtrr2protval[fallback];
+			BUG_ON(mtrr2protval[i] == MTRR2PROTVAL_INVALID);
+		}
+	}
+}
+
 static __init int svm_hardware_setup(void)
 {
 	int cpu;
@@ -931,6 +989,7 @@
 	} else
 		kvm_disable_tdp();
 
+	build_mtrr2protval();
 	return 0;
 
 err:
@@ -1085,6 +1144,39 @@
 	return target_tsc - tsc;
 }
 
+static void svm_set_guest_pat(struct vcpu_svm *svm, u64 *g_pat)
+{
+	struct kvm_vcpu *vcpu = &svm->vcpu;
+
+	/* Unlike Intel, AMD takes the guest's CR0.CD into account.
+	 *
+	 * AMD does not have IPAT.  To emulate it for the case of guests
+	 * with no assigned devices, just set everything to WB.  If guests
+	 * have assigned devices, however, we cannot force WB for RAM
+	 * pages only, so use the guest PAT directly.
+	 */
+	if (!kvm_arch_has_assigned_device(vcpu->kvm))
+		*g_pat = 0x0606060606060606;
+	else
+		*g_pat = vcpu->arch.pat;
+}
+
+static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
+{
+	u8 mtrr;
+
+	/*
+	 * 1. MMIO: trust guest MTRR, so same as item 3.
+	 * 2. No passthrough: always map as WB, and force guest PAT to WB as well
+	 * 3. Passthrough: can't guarantee the result, try to trust guest.
+	 */
+	if (!is_mmio && !kvm_arch_has_assigned_device(vcpu->kvm))
+		return 0;
+
+	mtrr = kvm_mtrr_get_guest_memory_type(vcpu, gfn);
+	return mtrr2protval[mtrr];
+}
+
 static void init_vmcb(struct vcpu_svm *svm, bool init_event)
 {
 	struct vmcb_control_area *control = &svm->vmcb->control;
@@ -1180,6 +1272,7 @@
 		clr_cr_intercept(svm, INTERCEPT_CR3_READ);
 		clr_cr_intercept(svm, INTERCEPT_CR3_WRITE);
 		save->g_pat = svm->vcpu.arch.pat;
+		svm_set_guest_pat(svm, &save->g_pat);
 		save->cr3 = 0;
 		save->cr4 = 0;
 	}
@@ -1579,7 +1672,7 @@
 	 * does not do it - this results in some delay at
 	 * reboot
 	 */
-	if (!(vcpu->kvm->arch.disabled_quirks & KVM_QUIRK_CD_NW_CLEARED))
+	if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED))
 		cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
 	svm->vmcb->save.cr0 = cr0;
 	mark_dirty(svm->vmcb, VMCB_CR);
@@ -3254,6 +3347,16 @@
 	case MSR_VM_IGNNE:
 		vcpu_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
 		break;
+	case MSR_IA32_CR_PAT:
+		if (npt_enabled) {
+			if (!kvm_mtrr_valid(vcpu, MSR_IA32_CR_PAT, data))
+				return 1;
+			vcpu->arch.pat = data;
+			svm_set_guest_pat(svm, &svm->vmcb->save.g_pat);
+			mark_dirty(svm->vmcb, VMCB_NPT);
+			break;
+		}
+		/* fall through */
 	default:
 		return kvm_set_msr_common(vcpu, msr);
 	}
@@ -4088,11 +4191,6 @@
 	return true;
 }
 
-static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
-{
-	return 0;
-}
-
 static void svm_cpuid_update(struct kvm_vcpu *vcpu)
 {
 }
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e856dd5..83b7b5c 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -8632,22 +8632,17 @@
 	u64 ipat = 0;
 
 	/* For VT-d and EPT combination
-	 * 1. MMIO: always map as UC
+	 * 1. MMIO: guest may want to apply WC, trust it.
 	 * 2. EPT with VT-d:
 	 *   a. VT-d without snooping control feature: can't guarantee the
-	 *	result, try to trust guest.
+	 *	result, try to trust guest.  So the same as item 1.
 	 *   b. VT-d with snooping control feature: snooping control feature of
 	 *	VT-d engine can guarantee the cache correctness. Just set it
 	 *	to WB to keep consistent with host. So the same as item 3.
 	 * 3. EPT without VT-d: always map as WB and set IPAT=1 to keep
 	 *    consistent with host MTRR
 	 */
-	if (is_mmio) {
-		cache = MTRR_TYPE_UNCACHABLE;
-		goto exit;
-	}
-
-	if (!kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
+	if (!is_mmio && !kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
 		ipat = VMX_EPT_IPAT_BIT;
 		cache = MTRR_TYPE_WRBACK;
 		goto exit;
@@ -8655,7 +8650,10 @@
 
 	if (kvm_read_cr0(vcpu) & X86_CR0_CD) {
 		ipat = VMX_EPT_IPAT_BIT;
-		cache = MTRR_TYPE_UNCACHABLE;
+		if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED))
+			cache = MTRR_TYPE_WRBACK;
+		else
+			cache = MTRR_TYPE_UNCACHABLE;
 		goto exit;
 	}
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index bbaf44e..5ef2560 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3157,8 +3157,7 @@
 			cpuid_count(XSTATE_CPUID, index,
 				    &size, &offset, &ecx, &edx);
 			memcpy(dest, src + offset, size);
-		} else
-			WARN_ON_ONCE(1);
+		}
 
 		valid -= feature;
 	}
@@ -7315,11 +7314,6 @@
 
 	vcpu = kvm_x86_ops->vcpu_create(kvm, id);
 
-	/*
-	 * Activate fpu unconditionally in case the guest needs eager FPU.  It will be
-	 * deactivated soon if it doesn't.
-	 */
-	kvm_x86_ops->fpu_activate(vcpu);
 	return vcpu;
 }
 
@@ -8218,6 +8212,24 @@
 			kvm_x86_ops->interrupt_allowed(vcpu);
 }
 
+void kvm_arch_start_assignment(struct kvm *kvm)
+{
+	atomic_inc(&kvm->arch.assigned_device_count);
+}
+EXPORT_SYMBOL_GPL(kvm_arch_start_assignment);
+
+void kvm_arch_end_assignment(struct kvm *kvm)
+{
+	atomic_dec(&kvm->arch.assigned_device_count);
+}
+EXPORT_SYMBOL_GPL(kvm_arch_end_assignment);
+
+bool kvm_arch_has_assigned_device(struct kvm *kvm)
+{
+	return atomic_read(&kvm->arch.assigned_device_count);
+}
+EXPORT_SYMBOL_GPL(kvm_arch_has_assigned_device);
+
 void kvm_arch_register_noncoherent_dma(struct kvm *kvm)
 {
 	atomic_inc(&kvm->arch.noncoherent_dma_count);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index edc8cdc..0ca2f3e 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -147,6 +147,11 @@
 	return kvm_register_write(vcpu, reg, val);
 }
 
+static inline bool kvm_check_has_quirk(struct kvm *kvm, u64 quirk)
+{
+	return !(kvm->arch.disabled_quirks & quirk);
+}
+
 void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
 void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
 void kvm_set_pending_timer(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index cc5ccc4..b9c78f3 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -63,8 +63,6 @@
 		    !PageReserved(pfn_to_page(start_pfn + i)))
 			return 1;
 
-	WARN_ONCE(1, "ioremap on RAM pfn 0x%lx\n", start_pfn);
-
 	return 0;
 }
 
@@ -94,7 +92,6 @@
 	pgprot_t prot;
 	int retval;
 	void __iomem *ret_addr;
-	int ram_region;
 
 	/* Don't allow wraparound or zero size */
 	last_addr = phys_addr + size - 1;
@@ -117,23 +114,15 @@
 	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
 	 */
-	/* First check if whole region can be identified as RAM or not */
-	ram_region = region_is_ram(phys_addr, size);
-	if (ram_region > 0) {
-		WARN_ONCE(1, "ioremap on RAM at 0x%lx - 0x%lx\n",
-				(unsigned long int)phys_addr,
-				(unsigned long int)last_addr);
+	pfn      = phys_addr >> PAGE_SHIFT;
+	last_pfn = last_addr >> PAGE_SHIFT;
+	if (walk_system_ram_range(pfn, last_pfn - pfn + 1, NULL,
+					  __ioremap_check_ram) == 1) {
+		WARN_ONCE(1, "ioremap on RAM at %pa - %pa\n",
+			  &phys_addr, &last_addr);
 		return NULL;
 	}
 
-	/* If could not be identified(-1), check page by page */
-	if (ram_region < 0) {
-		pfn      = phys_addr >> PAGE_SHIFT;
-		last_pfn = last_addr >> PAGE_SHIFT;
-		if (walk_system_ram_range(pfn, last_pfn - pfn + 1, NULL,
-					  __ioremap_check_ram) == 1)
-			return NULL;
-	}
 	/*
 	 * Mappings have to be page-aligned
 	 */
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 9d518d6..844b06d 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -126,3 +126,10 @@
 		mm->get_unmapped_area = arch_get_unmapped_area_topdown;
 	}
 }
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_MPX)
+		return "[mpx]";
+	return NULL;
+}
diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c
index 7a657f5..db1b0bc 100644
--- a/arch/x86/mm/mpx.c
+++ b/arch/x86/mm/mpx.c
@@ -20,20 +20,6 @@
 #define CREATE_TRACE_POINTS
 #include <asm/trace/mpx.h>
 
-static const char *mpx_mapping_name(struct vm_area_struct *vma)
-{
-	return "[mpx]";
-}
-
-static struct vm_operations_struct mpx_vma_ops = {
-	.name = mpx_mapping_name,
-};
-
-static int is_mpx_vma(struct vm_area_struct *vma)
-{
-	return (vma->vm_ops == &mpx_vma_ops);
-}
-
 static inline unsigned long mpx_bd_size_bytes(struct mm_struct *mm)
 {
 	if (is_64bit_mm(mm))
@@ -53,9 +39,6 @@
 /*
  * This is really a simplified "vm_mmap". it only handles MPX
  * bounds tables (the bounds directory is user-allocated).
- *
- * Later on, we use the vma->vm_ops to uniquely identify these
- * VMAs.
  */
 static unsigned long mpx_mmap(unsigned long len)
 {
@@ -101,7 +84,6 @@
 		ret = -ENOMEM;
 		goto out;
 	}
-	vma->vm_ops = &mpx_vma_ops;
 
 	if (vm_flags & VM_LOCKED) {
 		up_write(&mm->mmap_sem);
@@ -812,7 +794,7 @@
 		 * so stop immediately and return an error.  This
 		 * probably results in a SIGSEGV.
 		 */
-		if (!is_mpx_vma(vma))
+		if (!(vma->vm_flags & VM_MPX))
 			return -EINVAL;
 
 		len = min(vma->vm_end, end) - addr;
@@ -945,9 +927,9 @@
 	 * lots of tables even though we have no actual table
 	 * entries in use.
 	 */
-	while (next && is_mpx_vma(next))
+	while (next && (next->vm_flags & VM_MPX))
 		next = next->vm_next;
-	while (prev && is_mpx_vma(prev))
+	while (prev && (prev->vm_flags & VM_MPX))
 		prev = prev->vm_prev;
 	/*
 	 * We know 'start' and 'end' lie within an area controlled
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 3250f23..90b924a 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -117,7 +117,7 @@
 		} else {
 			unsigned long addr;
 			unsigned long nr_pages =
-				f->flush_end - f->flush_start / PAGE_SIZE;
+				(f->flush_end - f->flush_start) / PAGE_SIZE;
 			addr = f->flush_start;
 			while (addr < f->flush_end) {
 				__flush_tlb_single(addr);
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index 14d15bf..5b478ac 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -19,6 +19,7 @@
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
 generic-y += percpu.h
 generic-y += preempt.h
 generic-y += resource.h
diff --git a/arch/xtensa/include/asm/mm-arch-hooks.h b/arch/xtensa/include/asm/mm-arch-hooks.h
deleted file mode 100644
index d2e5cfd..0000000
--- a/arch/xtensa/include/asm/mm-arch-hooks.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_XTENSA_MM_ARCH_HOOKS_H
-#define _ASM_XTENSA_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_XTENSA_MM_ARCH_HOOKS_H */
diff --git a/block/bio-integrity.c b/block/bio-integrity.c
index 0436c21..719b715 100644
--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -51,7 +51,7 @@
 	unsigned long idx = BIO_POOL_NONE;
 	unsigned inline_vecs;
 
-	if (!bs) {
+	if (!bs || !bs->bio_integrity_pool) {
 		bip = kmalloc(sizeof(struct bio_integrity_payload) +
 			      sizeof(struct bio_vec) * nr_vecs, gfp_mask);
 		inline_vecs = nr_vecs;
@@ -104,7 +104,7 @@
 		kfree(page_address(bip->bip_vec->bv_page) +
 		      bip->bip_vec->bv_offset);
 
-	if (bs) {
+	if (bs && bs->bio_integrity_pool) {
 		if (bip->bip_slab != BIO_POOL_NONE)
 			bvec_free(bs->bvec_integrity_pool, bip->bip_vec,
 				  bip->bip_slab);
diff --git a/block/bio.c b/block/bio.c
index 2a00d34..d6e5ba3 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1831,8 +1831,9 @@
  * Allocates and returns a new bio which represents @sectors from the start of
  * @bio, and updates @bio to represent the remaining sectors.
  *
- * The newly allocated bio will point to @bio's bi_io_vec; it is the caller's
- * responsibility to ensure that @bio is not freed before the split.
+ * Unless this is a discard request the newly allocated bio will point
+ * to @bio's bi_io_vec; it is the caller's responsibility to ensure that
+ * @bio is not freed before the split.
  */
 struct bio *bio_split(struct bio *bio, int sectors,
 		      gfp_t gfp, struct bio_set *bs)
@@ -1842,7 +1843,15 @@
 	BUG_ON(sectors <= 0);
 	BUG_ON(sectors >= bio_sectors(bio));
 
-	split = bio_clone_fast(bio, gfp, bs);
+	/*
+	 * Discards need a mutable bio_vec to accommodate the payload
+	 * required by the DSM TRIM and UNMAP commands.
+	 */
+	if (bio->bi_rw & REQ_DISCARD)
+		split = bio_clone_bioset(bio, gfp, bs);
+	else
+		split = bio_clone_fast(bio, gfp, bs);
+
 	if (!split)
 		return NULL;
 
@@ -2009,6 +2018,7 @@
 	bio->bi_css = blkcg_css;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(bio_associate_blkcg);
 
 /**
  * bio_associate_current - associate a bio with %current
@@ -2039,6 +2049,7 @@
 	bio->bi_css = task_get_css(current, blkio_cgrp_id);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(bio_associate_current);
 
 /**
  * bio_disassociate_task - undo bio_associate_current()
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 9f97da5..d6283b3 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -29,6 +29,14 @@
 
 #define MAX_KEY_LEN 100
 
+/*
+ * blkcg_pol_mutex protects blkcg_policy[] and policy [de]activation.
+ * blkcg_pol_register_mutex nests outside of it and synchronizes entire
+ * policy [un]register operations including cgroup file additions /
+ * removals.  Putting cgroup file registration outside blkcg_pol_mutex
+ * allows grabbing it from cgroup callbacks.
+ */
+static DEFINE_MUTEX(blkcg_pol_register_mutex);
 static DEFINE_MUTEX(blkcg_pol_mutex);
 
 struct blkcg blkcg_root;
@@ -38,6 +46,8 @@
 
 static struct blkcg_policy *blkcg_policy[BLKCG_MAX_POLS];
 
+static LIST_HEAD(all_blkcgs);		/* protected by blkcg_pol_mutex */
+
 static bool blkcg_policy_enabled(struct request_queue *q,
 				 const struct blkcg_policy *pol)
 {
@@ -453,20 +463,7 @@
 	struct blkcg_gq *blkg;
 	int i;
 
-	/*
-	 * XXX: We invoke cgroup_add/rm_cftypes() under blkcg_pol_mutex
-	 * which ends up putting cgroup's internal cgroup_tree_mutex under
-	 * it; however, cgroup_tree_mutex is nested above cgroup file
-	 * active protection and grabbing blkcg_pol_mutex from a cgroup
-	 * file operation creates a possible circular dependency.  cgroup
-	 * internal locking is planned to go through further simplification
-	 * and this issue should go away soon.  For now, let's trylock
-	 * blkcg_pol_mutex and restart the write on failure.
-	 *
-	 * http://lkml.kernel.org/g/5363C04B.4010400@oracle.com
-	 */
-	if (!mutex_trylock(&blkcg_pol_mutex))
-		return restart_syscall();
+	mutex_lock(&blkcg_pol_mutex);
 	spin_lock_irq(&blkcg->lock);
 
 	/*
@@ -721,8 +718,12 @@
 		return -EINVAL;
 
 	disk = get_gendisk(MKDEV(major, minor), &part);
-	if (!disk || part)
+	if (!disk)
 		return -EINVAL;
+	if (part) {
+		put_disk(disk);
+		return -EINVAL;
+	}
 
 	rcu_read_lock();
 	spin_lock_irq(disk->queue->queue_lock);
@@ -822,8 +823,17 @@
 {
 	struct blkcg *blkcg = css_to_blkcg(css);
 
-	if (blkcg != &blkcg_root)
+	mutex_lock(&blkcg_pol_mutex);
+	list_del(&blkcg->all_blkcgs_node);
+	mutex_unlock(&blkcg_pol_mutex);
+
+	if (blkcg != &blkcg_root) {
+		int i;
+
+		for (i = 0; i < BLKCG_MAX_POLS; i++)
+			kfree(blkcg->pd[i]);
 		kfree(blkcg);
+	}
 }
 
 static struct cgroup_subsys_state *
@@ -833,6 +843,8 @@
 	struct cgroup_subsys_state *ret;
 	int i;
 
+	mutex_lock(&blkcg_pol_mutex);
+
 	if (!parent_css) {
 		blkcg = &blkcg_root;
 		goto done;
@@ -875,14 +887,17 @@
 #ifdef CONFIG_CGROUP_WRITEBACK
 	INIT_LIST_HEAD(&blkcg->cgwb_list);
 #endif
+	list_add_tail(&blkcg->all_blkcgs_node, &all_blkcgs);
+
+	mutex_unlock(&blkcg_pol_mutex);
 	return &blkcg->css;
 
 free_pd_blkcg:
 	for (i--; i >= 0; i--)
 		kfree(blkcg->pd[i]);
-
 free_blkcg:
 	kfree(blkcg);
+	mutex_unlock(&blkcg_pol_mutex);
 	return ret;
 }
 
@@ -1037,10 +1052,8 @@
 			  const struct blkcg_policy *pol)
 {
 	LIST_HEAD(pds);
-	LIST_HEAD(cpds);
 	struct blkcg_gq *blkg;
 	struct blkg_policy_data *pd, *nd;
-	struct blkcg_policy_data *cpd, *cnd;
 	int cnt = 0, ret;
 
 	if (blkcg_policy_enabled(q, pol))
@@ -1053,10 +1066,7 @@
 		cnt++;
 	spin_unlock_irq(q->queue_lock);
 
-	/*
-	 * Allocate per-blkg and per-blkcg policy data
-	 * for all existing blkgs.
-	 */
+	/* allocate per-blkg policy data for all existing blkgs */
 	while (cnt--) {
 		pd = kzalloc_node(pol->pd_size, GFP_KERNEL, q->node);
 		if (!pd) {
@@ -1064,15 +1074,6 @@
 			goto out_free;
 		}
 		list_add_tail(&pd->alloc_node, &pds);
-
-		if (!pol->cpd_size)
-			continue;
-		cpd = kzalloc_node(pol->cpd_size, GFP_KERNEL, q->node);
-		if (!cpd) {
-			ret = -ENOMEM;
-			goto out_free;
-		}
-		list_add_tail(&cpd->alloc_node, &cpds);
 	}
 
 	/*
@@ -1082,32 +1083,17 @@
 	spin_lock_irq(q->queue_lock);
 
 	list_for_each_entry(blkg, &q->blkg_list, q_node) {
-		if (WARN_ON(list_empty(&pds)) ||
-		    WARN_ON(pol->cpd_size && list_empty(&cpds))) {
+		if (WARN_ON(list_empty(&pds))) {
 			/* umm... this shouldn't happen, just abort */
 			ret = -ENOMEM;
 			goto out_unlock;
 		}
-		cpd = list_first_entry(&cpds, struct blkcg_policy_data,
-				       alloc_node);
-		list_del_init(&cpd->alloc_node);
 		pd = list_first_entry(&pds, struct blkg_policy_data, alloc_node);
 		list_del_init(&pd->alloc_node);
 
 		/* grab blkcg lock too while installing @pd on @blkg */
 		spin_lock(&blkg->blkcg->lock);
 
-		if (!pol->cpd_size)
-			goto no_cpd;
-		if (!blkg->blkcg->pd[pol->plid]) {
-			/* Per-policy per-blkcg data */
-			blkg->blkcg->pd[pol->plid] = cpd;
-			cpd->plid = pol->plid;
-			pol->cpd_init_fn(blkg->blkcg);
-		} else { /* must free it as it has already been extracted */
-			kfree(cpd);
-		}
-no_cpd:
 		blkg->pd[pol->plid] = pd;
 		pd->blkg = blkg;
 		pd->plid = pol->plid;
@@ -1124,8 +1110,6 @@
 	blk_queue_bypass_end(q);
 	list_for_each_entry_safe(pd, nd, &pds, alloc_node)
 		kfree(pd);
-	list_for_each_entry_safe(cpd, cnd, &cpds, alloc_node)
-		kfree(cpd);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(blkcg_activate_policy);
@@ -1162,8 +1146,6 @@
 
 		kfree(blkg->pd[pol->plid]);
 		blkg->pd[pol->plid] = NULL;
-		kfree(blkg->blkcg->pd[pol->plid]);
-		blkg->blkcg->pd[pol->plid] = NULL;
 
 		spin_unlock(&blkg->blkcg->lock);
 	}
@@ -1182,11 +1164,13 @@
  */
 int blkcg_policy_register(struct blkcg_policy *pol)
 {
+	struct blkcg *blkcg;
 	int i, ret;
 
 	if (WARN_ON(pol->pd_size < sizeof(struct blkg_policy_data)))
 		return -EINVAL;
 
+	mutex_lock(&blkcg_pol_register_mutex);
 	mutex_lock(&blkcg_pol_mutex);
 
 	/* find an empty slot */
@@ -1195,19 +1179,49 @@
 		if (!blkcg_policy[i])
 			break;
 	if (i >= BLKCG_MAX_POLS)
-		goto out_unlock;
+		goto err_unlock;
 
-	/* register and update blkgs */
+	/* register @pol */
 	pol->plid = i;
-	blkcg_policy[i] = pol;
+	blkcg_policy[pol->plid] = pol;
+
+	/* allocate and install cpd's */
+	if (pol->cpd_size) {
+		list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node) {
+			struct blkcg_policy_data *cpd;
+
+			cpd = kzalloc(pol->cpd_size, GFP_KERNEL);
+			if (!cpd) {
+				mutex_unlock(&blkcg_pol_mutex);
+				goto err_free_cpds;
+			}
+
+			blkcg->pd[pol->plid] = cpd;
+			cpd->plid = pol->plid;
+			pol->cpd_init_fn(blkcg);
+		}
+	}
+
+	mutex_unlock(&blkcg_pol_mutex);
 
 	/* everything is in place, add intf files for the new policy */
 	if (pol->cftypes)
 		WARN_ON(cgroup_add_legacy_cftypes(&blkio_cgrp_subsys,
 						  pol->cftypes));
-	ret = 0;
-out_unlock:
+	mutex_unlock(&blkcg_pol_register_mutex);
+	return 0;
+
+err_free_cpds:
+	if (pol->cpd_size) {
+		list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node) {
+			kfree(blkcg->pd[pol->plid]);
+			blkcg->pd[pol->plid] = NULL;
+		}
+	}
+	blkcg_policy[pol->plid] = NULL;
+err_unlock:
 	mutex_unlock(&blkcg_pol_mutex);
+	mutex_unlock(&blkcg_pol_register_mutex);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(blkcg_policy_register);
@@ -1220,7 +1234,9 @@
  */
 void blkcg_policy_unregister(struct blkcg_policy *pol)
 {
-	mutex_lock(&blkcg_pol_mutex);
+	struct blkcg *blkcg;
+
+	mutex_lock(&blkcg_pol_register_mutex);
 
 	if (WARN_ON(blkcg_policy[pol->plid] != pol))
 		goto out_unlock;
@@ -1229,9 +1245,19 @@
 	if (pol->cftypes)
 		cgroup_rm_cftypes(pol->cftypes);
 
-	/* unregister and update blkgs */
+	/* remove cpds and unregister */
+	mutex_lock(&blkcg_pol_mutex);
+
+	if (pol->cpd_size) {
+		list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node) {
+			kfree(blkcg->pd[pol->plid]);
+			blkcg->pd[pol->plid] = NULL;
+		}
+	}
 	blkcg_policy[pol->plid] = NULL;
-out_unlock:
+
 	mutex_unlock(&blkcg_pol_mutex);
+out_unlock:
+	mutex_unlock(&blkcg_pol_register_mutex);
 }
 EXPORT_SYMBOL_GPL(blkcg_policy_unregister);
diff --git a/block/blk-core.c b/block/blk-core.c
index 82819e6..627ed0c 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -3370,7 +3370,7 @@
 int __init blk_dev_init(void)
 {
 	BUILD_BUG_ON(__REQ_NR_BITS > 8 *
-			sizeof(((struct request *)0)->cmd_flags));
+			FIELD_SIZEOF(struct request, cmd_flags));
 
 	/* used for unplugging and affects IO latency/throughput - HIGHPRI */
 	kblockd_workqueue = alloc_workqueue("kblockd",
diff --git a/block/blk-mq.c b/block/blk-mq.c
index f537796..7d842db 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1998,7 +1998,7 @@
 		goto err_hctxs;
 
 	setup_timer(&q->timeout, blk_mq_rq_timer, (unsigned long) q);
-	blk_queue_rq_timeout(q, set->timeout ? set->timeout : 30000);
+	blk_queue_rq_timeout(q, set->timeout ? set->timeout : 30 * HZ);
 
 	q->nr_queues = nr_cpu_ids;
 	q->nr_hw_queues = set->nr_hw_queues;
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 717afcd..88dbbb1 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -231,7 +231,7 @@
 		dev_warn(&device->dev, "Failed to change power state to %s\n",
 			 acpi_power_state_string(state));
 	} else {
-		device->power.state = state;
+		device->power.state = target_state;
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Device [%s] transitioned to %s\n",
 				  device->pnp.bus_id,
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 8244f01..f1c966e 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -193,6 +193,7 @@
 	u8 iodec = attr->granularity == 0xfff ? ACPI_DECODE_10 : ACPI_DECODE_16;
 	bool wp = addr->info.mem.write_protect;
 	u64 len = attr->address_length;
+	u64 start, end, offset = 0;
 	struct resource *res = &win->res;
 
 	/*
@@ -204,9 +205,6 @@
 		pr_debug("ACPI: Invalid address space min_addr_fix %d, max_addr_fix %d, len %llx\n",
 			 addr->min_address_fixed, addr->max_address_fixed, len);
 
-	res->start = attr->minimum;
-	res->end = attr->maximum;
-
 	/*
 	 * For bridges that translate addresses across the bridge,
 	 * translation_offset is the offset that must be added to the
@@ -214,12 +212,22 @@
 	 * primary side. Non-bridge devices must list 0 for all Address
 	 * Translation offset bits.
 	 */
-	if (addr->producer_consumer == ACPI_PRODUCER) {
-		res->start += attr->translation_offset;
-		res->end += attr->translation_offset;
-	} else if (attr->translation_offset) {
+	if (addr->producer_consumer == ACPI_PRODUCER)
+		offset = attr->translation_offset;
+	else if (attr->translation_offset)
 		pr_debug("ACPI: translation_offset(%lld) is invalid for non-bridge device.\n",
 			 attr->translation_offset);
+	start = attr->minimum + offset;
+	end = attr->maximum + offset;
+
+	win->offset = offset;
+	res->start = start;
+	res->end = end;
+	if (sizeof(resource_size_t) < sizeof(u64) &&
+	    (offset != win->offset || start != res->start || end != res->end)) {
+		pr_warn("acpi resource window ([%#llx-%#llx] ignored, not CPU addressable)\n",
+			attr->minimum, attr->maximum);
+		return false;
 	}
 
 	switch (addr->resource_type) {
@@ -236,8 +244,6 @@
 		return false;
 	}
 
-	win->offset = attr->translation_offset;
-
 	if (addr->producer_consumer == ACPI_PRODUCER)
 		res->flags |= IORESOURCE_WINDOW;
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e83fc3d..db5d9f7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2478,6 +2478,10 @@
 		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
 					 dev->max_sectors);
 
+	if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024)
+		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024,
+					 dev->max_sectors);
+
 	if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48)
 		dev->max_sectors = ATA_MAX_SECTORS_LBA48;
 
@@ -4146,6 +4150,12 @@
 	{ "Slimtype DVD A  DS8A8SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 	{ "Slimtype DVD A  DS8A9SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 
+	/*
+	 * Causes silent data corruption with higher max sects.
+	 * http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com
+	 */
+	{ "ST380013AS",		"3.20",		ATA_HORKAGE_MAX_SEC_1024 },
+
 	/* Devices we expect to fail diagnostics */
 
 	/* Devices where NCQ should be avoided */
@@ -4174,9 +4184,10 @@
 	{ "ST3320[68]13AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	/* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+	/* drives which fail FPDMA_AA activation (some may freeze afterwards) */
 	{ "ST1000LM024 HN-M101MBB", "2AR10001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
 	{ "ST1000LM024 HN-M101MBB", "2BA30001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
+	{ "VB0250EAVER",	"HPG7",		ATA_HORKAGE_BROKEN_FPDMA_AA },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132
 	   Windows driver .inf file - also several Linux problem reports */
@@ -4229,7 +4240,7 @@
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
-	{ "Micron_M5[15]0*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
+	{ "Micron_M5[15]0_*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*M550*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -4238,6 +4249,9 @@
 	{ "Samsung SSD 8*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 
+	/* devices that don't properly handle TRIM commands */
+	{ "SuperSSpeed S238*",		NULL,	ATA_HORKAGE_NOTRIM, },
+
 	/*
 	 * As defined, the DRAT (Deterministic Read After Trim) and RZAT
 	 * (Return Zero After Trim) flags in the ATA Command Set are
@@ -4501,7 +4515,8 @@
 	else /* In the ancient relic department - skip all of this */
 		return 0;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	/* On some disks, this command causes spin-up, so we need longer timeout */
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000);
 
 	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 7ccc084..85aa761 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -460,6 +460,13 @@
 				       ATA_LFLAG_NO_SRST |
 				       ATA_LFLAG_ASSUME_ATA;
 		}
+	} else if (vendor == 0x11ab && devid == 0x4140) {
+		/* Marvell 4140 quirks */
+		ata_for_each_link(link, ap, EDGE) {
+			/* port 4 is for SEMB device and it doesn't like SRST */
+			if (link->pmp == 4)
+				link->flags |= ATA_LFLAG_DISABLED;
+		}
 	}
 }
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3131adc..641a61a 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2568,7 +2568,8 @@
 		rbuf[14] = (lowest_aligned >> 8) & 0x3f;
 		rbuf[15] = lowest_aligned;
 
-		if (ata_id_has_trim(args->id)) {
+		if (ata_id_has_trim(args->id) &&
+		    !(dev->horkage & ATA_HORKAGE_NOTRIM)) {
 			rbuf[14] |= 0x80; /* LBPME */
 
 			if (ata_id_has_zero_after_trim(args->id) &&
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index d6c37bc..e2d9497 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -569,6 +569,8 @@
 
 	if (!ata_id_has_trim(ata_dev->id))
 		mode = "unsupported";
+	else if (ata_dev->horkage & ATA_HORKAGE_NOTRIM)
+		mode = "forced_unsupported";
 	else if (ata_dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM)
 			mode = "forced_unqueued";
 	else if (ata_fpdma_dsm_supported(ata_dev))
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index a9b0c82..5d9ee99 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -4,7 +4,7 @@
  * Arasan Compact Flash host controller source file
  *
  * Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -968,7 +968,7 @@
 
 module_platform_driver(arasan_cf_driver);
 
-MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
+MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>");
 MODULE_DESCRIPTION("Arasan ATA Compact Flash driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c
index 69de41a..3177b24 100644
--- a/drivers/block/null_blk.c
+++ b/drivers/block/null_blk.c
@@ -240,19 +240,19 @@
 	while ((entry = llist_del_all(&cq->list)) != NULL) {
 		entry = llist_reverse_order(entry);
 		do {
+			struct request_queue *q = NULL;
+
 			cmd = container_of(entry, struct nullb_cmd, ll_list);
 			entry = entry->next;
+			if (cmd->rq)
+				q = cmd->rq->q;
 			end_cmd(cmd);
 
-			if (cmd->rq) {
-				struct request_queue *q = cmd->rq->q;
-
-				if (!q->mq_ops && blk_queue_stopped(q)) {
-					spin_lock(q->queue_lock);
-					if (blk_queue_stopped(q))
-						blk_start_queue(q);
-					spin_unlock(q->queue_lock);
-				}
+			if (q && !q->mq_ops && blk_queue_stopped(q)) {
+				spin_lock(q->queue_lock);
+				if (blk_queue_stopped(q))
+					blk_start_queue(q);
+				spin_unlock(q->queue_lock);
 			}
 		} while (entry);
 	}
diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c
index d1d6141..7920c27 100644
--- a/drivers/block/nvme-core.c
+++ b/drivers/block/nvme-core.c
@@ -2108,8 +2108,17 @@
 		goto out_free_disk;
 
 	add_disk(ns->disk);
-	if (ns->ms)
-		revalidate_disk(ns->disk);
+	if (ns->ms) {
+		struct block_device *bd = bdget_disk(ns->disk, 0);
+		if (!bd)
+			return;
+		if (blkdev_get(bd, FMODE_READ, NULL)) {
+			bdput(bd);
+			return;
+		}
+		blkdev_reread_part(bd);
+		blkdev_put(bd, FMODE_READ);
+	}
 	return;
  out_free_disk:
 	kfree(disk);
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 1e1a432..9ceb8ac 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -472,12 +472,11 @@
 
 	/* Read Verbose Config Version Info */
 	skb = btbcm_read_verbose_config(hdev);
-	if (IS_ERR(skb))
-		return PTR_ERR(skb);
-
-	BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
-		get_unaligned_le16(skb->data + 5));
-	kfree_skb(skb);
+	if (!IS_ERR(skb)) {
+		BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
+			get_unaligned_le16(skb->data + 5));
+		kfree_skb(skb);
+	}
 
 	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 
diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
index 283f00a..1082d4b 100644
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -129,8 +129,9 @@
 
 	device_initialize(&chip->dev);
 
-	chip->cdev.owner = chip->pdev->driver->owner;
 	cdev_init(&chip->cdev, &tpm_fops);
+	chip->cdev.owner = chip->pdev->driver->owner;
+	chip->cdev.kobj.parent = &chip->dev.kobj;
 
 	return chip;
 }
diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 44f9d20..1267322 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -233,6 +233,14 @@
 		return -ENODEV;
 	}
 
+	/* At least some versions of AMI BIOS have a bug that TPM2 table has
+	 * zero address for the control area and therefore we must fail.
+	*/
+	if (!buf->control_area_pa) {
+		dev_err(dev, "TPM2 ACPI table has a zero address for the control area\n");
+		return -EINVAL;
+	}
+
 	if (buf->hdr.length < sizeof(struct acpi_tpm2)) {
 		dev_err(dev, "TPM2 ACPI table has wrong size");
 		return -EINVAL;
diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c
index bdfb4421..f271c35 100644
--- a/drivers/clk/spear/clk-aux-synth.c
+++ b/drivers/clk/spear/clk-aux-synth.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c
index dffd4ce..58d678b 100644
--- a/drivers/clk/spear/clk-frac-synth.c
+++ b/drivers/clk/spear/clk-frac-synth.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c
index 1afc18c..1a722e9 100644
--- a/drivers/clk/spear/clk-gpt-synth.c
+++ b/drivers/clk/spear/clk-gpt-synth.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c
index 1b9b65b..5ebddc5 100644
--- a/drivers/clk/spear/clk-vco-pll.c
+++ b/drivers/clk/spear/clk-vco-pll.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c
index 628b6d5..157fe09 100644
--- a/drivers/clk/spear/clk.c
+++ b/drivers/clk/spear/clk.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
index 9317376..9834944 100644
--- a/drivers/clk/spear/clk.h
+++ b/drivers/clk/spear/clk.h
@@ -2,7 +2,7 @@
  * Clock framework definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c
index 4daa597..222ce108 100644
--- a/drivers/clk/spear/spear1310_clock.c
+++ b/drivers/clk/spear/spear1310_clock.c
@@ -4,7 +4,7 @@
  * SPEAr1310 machine clock framework source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c
index 5a5c664..973c9d3 100644
--- a/drivers/clk/spear/spear1340_clock.c
+++ b/drivers/clk/spear/spear1340_clock.c
@@ -4,7 +4,7 @@
  * SPEAr1340 machine clock framework source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
index bb5f387..404a55e 100644
--- a/drivers/clk/spear/spear3xx_clock.c
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -2,7 +2,7 @@
  * SPEAr3xx machines clock framework source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
index 4f649c9..231061f 100644
--- a/drivers/clk/spear/spear6xx_clock.c
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -2,7 +2,7 @@
  * SPEAr6xx machines clock framework source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
+ * Viresh Kumar <vireshk@kernel.org>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index b612411..7a3c30c 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -169,6 +169,15 @@
 }
 EXPORT_SYMBOL_GPL(get_governor_parent_kobj);
 
+struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
+
+	return policy && !policy_is_inactive(policy) ?
+		policy->freq_table : NULL;
+}
+EXPORT_SYMBOL_GPL(cpufreq_frequency_get_table);
+
 static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
 {
 	u64 idle_time;
@@ -993,7 +1002,7 @@
 	int ret = 0;
 
 	/* Some related CPUs might not be present (physically hotplugged) */
-	for_each_cpu_and(j, policy->related_cpus, cpu_present_mask) {
+	for_each_cpu(j, policy->real_cpus) {
 		if (j == policy->kobj_cpu)
 			continue;
 
@@ -1010,7 +1019,7 @@
 	unsigned int j;
 
 	/* Some related CPUs might not be present (physically hotplugged) */
-	for_each_cpu_and(j, policy->related_cpus, cpu_present_mask) {
+	for_each_cpu(j, policy->real_cpus) {
 		if (j == policy->kobj_cpu)
 			continue;
 
@@ -1132,6 +1141,7 @@
 
 		down_write(&policy->rwsem);
 		policy->cpu = cpu;
+		policy->governor = NULL;
 		up_write(&policy->rwsem);
 	}
 
@@ -1153,11 +1163,14 @@
 	if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL))
 		goto err_free_cpumask;
 
+	if (!zalloc_cpumask_var(&policy->real_cpus, GFP_KERNEL))
+		goto err_free_rcpumask;
+
 	ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &dev->kobj,
 				   "cpufreq");
 	if (ret) {
 		pr_err("%s: failed to init policy->kobj: %d\n", __func__, ret);
-		goto err_free_rcpumask;
+		goto err_free_real_cpus;
 	}
 
 	INIT_LIST_HEAD(&policy->policy_list);
@@ -1174,6 +1187,8 @@
 
 	return policy;
 
+err_free_real_cpus:
+	free_cpumask_var(policy->real_cpus);
 err_free_rcpumask:
 	free_cpumask_var(policy->related_cpus);
 err_free_cpumask:
@@ -1224,6 +1239,7 @@
 	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
 	cpufreq_policy_put_kobj(policy, notify);
+	free_cpumask_var(policy->real_cpus);
 	free_cpumask_var(policy->related_cpus);
 	free_cpumask_var(policy->cpus);
 	kfree(policy);
@@ -1248,14 +1264,17 @@
 
 	pr_debug("adding CPU %u\n", cpu);
 
-	/*
-	 * Only possible if 'cpu' wasn't physically present earlier and we are
-	 * here from subsys_interface add callback. A hotplug notifier will
-	 * follow and we will handle it like logical CPU hotplug then. For now,
-	 * just create the sysfs link.
-	 */
-	if (cpu_is_offline(cpu))
-		return add_cpu_dev_symlink(per_cpu(cpufreq_cpu_data, cpu), cpu);
+	if (cpu_is_offline(cpu)) {
+		/*
+		 * Only possible if we are here from the subsys_interface add
+		 * callback.  A hotplug notifier will follow and we will handle
+		 * it as CPU online then.  For now, just create the sysfs link,
+		 * unless there is no policy or the link is already present.
+		 */
+		policy = per_cpu(cpufreq_cpu_data, cpu);
+		return policy && !cpumask_test_and_set_cpu(cpu, policy->real_cpus)
+			? add_cpu_dev_symlink(policy, cpu) : 0;
+	}
 
 	if (!down_read_trylock(&cpufreq_rwsem))
 		return 0;
@@ -1297,6 +1316,10 @@
 	/* related cpus should atleast have policy->cpus */
 	cpumask_or(policy->related_cpus, policy->related_cpus, policy->cpus);
 
+	/* Remember which CPUs have been present at the policy creation time. */
+	if (!recover_policy)
+		cpumask_and(policy->real_cpus, policy->cpus, cpu_present_mask);
+
 	/*
 	 * affected cpus must always be the one, which are online. We aren't
 	 * managing offline cpus here.
@@ -1410,8 +1433,7 @@
 	return ret;
 }
 
-static int __cpufreq_remove_dev_prepare(struct device *dev,
-					struct subsys_interface *sif)
+static int __cpufreq_remove_dev_prepare(struct device *dev)
 {
 	unsigned int cpu = dev->id;
 	int ret = 0;
@@ -1427,10 +1449,8 @@
 
 	if (has_target()) {
 		ret = __cpufreq_governor(policy, CPUFREQ_GOV_STOP);
-		if (ret) {
+		if (ret)
 			pr_err("%s: Failed to stop governor\n", __func__);
-			return ret;
-		}
 	}
 
 	down_write(&policy->rwsem);
@@ -1463,8 +1483,7 @@
 	return ret;
 }
 
-static int __cpufreq_remove_dev_finish(struct device *dev,
-				       struct subsys_interface *sif)
+static int __cpufreq_remove_dev_finish(struct device *dev)
 {
 	unsigned int cpu = dev->id;
 	int ret;
@@ -1482,10 +1501,8 @@
 	/* If cpu is last user of policy, free policy */
 	if (has_target()) {
 		ret = __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
-		if (ret) {
+		if (ret)
 			pr_err("%s: Failed to exit governor\n", __func__);
-			return ret;
-		}
 	}
 
 	/*
@@ -1496,10 +1513,6 @@
 	if (cpufreq_driver->exit)
 		cpufreq_driver->exit(policy);
 
-	/* Free the policy only if the driver is getting removed. */
-	if (sif)
-		cpufreq_policy_free(policy, true);
-
 	return 0;
 }
 
@@ -1511,42 +1524,41 @@
 static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif)
 {
 	unsigned int cpu = dev->id;
-	int ret;
+	struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
 
-	/*
-	 * Only possible if 'cpu' is getting physically removed now. A hotplug
-	 * notifier should have already been called and we just need to remove
-	 * link or free policy here.
-	 */
-	if (cpu_is_offline(cpu)) {
-		struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
-		struct cpumask mask;
+	if (!policy)
+		return 0;
 
-		if (!policy)
-			return 0;
+	if (cpu_online(cpu)) {
+		__cpufreq_remove_dev_prepare(dev);
+		__cpufreq_remove_dev_finish(dev);
+	}
 
-		cpumask_copy(&mask, policy->related_cpus);
-		cpumask_clear_cpu(cpu, &mask);
+	cpumask_clear_cpu(cpu, policy->real_cpus);
 
-		/*
-		 * Free policy only if all policy->related_cpus are removed
-		 * physically.
-		 */
-		if (cpumask_intersects(&mask, cpu_present_mask)) {
-			remove_cpu_dev_symlink(policy, cpu);
-			return 0;
-		}
-
+	if (cpumask_empty(policy->real_cpus)) {
 		cpufreq_policy_free(policy, true);
 		return 0;
 	}
 
-	ret = __cpufreq_remove_dev_prepare(dev, sif);
+	if (cpu != policy->kobj_cpu) {
+		remove_cpu_dev_symlink(policy, cpu);
+	} else {
+		/*
+		 * The CPU owning the policy object is going away.  Move it to
+		 * another suitable CPU.
+		 */
+		unsigned int new_cpu = cpumask_first(policy->real_cpus);
+		struct device *new_dev = get_cpu_device(new_cpu);
 
-	if (!ret)
-		ret = __cpufreq_remove_dev_finish(dev, sif);
+		dev_dbg(dev, "%s: Moving policy object to CPU%u\n", __func__, new_cpu);
 
-	return ret;
+		sysfs_remove_link(&new_dev->kobj, "cpufreq");
+		policy->kobj_cpu = new_cpu;
+		WARN_ON(kobject_move(&policy->kobj, &new_dev->kobj));
+	}
+
+	return 0;
 }
 
 static void handle_update(struct work_struct *work)
@@ -2385,11 +2397,11 @@
 			break;
 
 		case CPU_DOWN_PREPARE:
-			__cpufreq_remove_dev_prepare(dev, NULL);
+			__cpufreq_remove_dev_prepare(dev);
 			break;
 
 		case CPU_POST_DEAD:
-			__cpufreq_remove_dev_finish(dev, NULL);
+			__cpufreq_remove_dev_finish(dev);
 			break;
 
 		case CPU_DOWN_FAILED:
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index df14766..dfbbf981 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -297,15 +297,6 @@
 }
 EXPORT_SYMBOL_GPL(cpufreq_table_validate_and_show);
 
-struct cpufreq_policy *cpufreq_cpu_get_raw(unsigned int cpu);
-
-struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu)
-{
-	struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu);
-	return policy ? policy->freq_table : NULL;
-}
-EXPORT_SYMBOL_GPL(cpufreq_frequency_get_table);
-
 MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
 MODULE_DESCRIPTION("CPUfreq frequency table helpers");
 MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 15ada47..fcb929e 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -681,6 +681,7 @@
 		.get_max = core_get_max_pstate,
 		.get_min = core_get_min_pstate,
 		.get_turbo = knl_get_turbo_pstate,
+		.get_scaling = core_get_scaling,
 		.set = core_set_pstate,
 	},
 };
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index e8e2775..48b7228 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -112,7 +112,12 @@
 static void enter_freeze_proper(struct cpuidle_driver *drv,
 				struct cpuidle_device *dev, int index)
 {
-	tick_freeze();
+	/*
+	 * trace_suspend_resume() called by tick_freeze() for the last CPU
+	 * executing it contains RCU usage regarded as invalid in the idle
+	 * context, so tell RCU about that.
+	 */
+	RCU_NONIDLE(tick_freeze());
 	/*
 	 * The state used here cannot be a "coupled" one, because the "coupled"
 	 * cpuidle mechanism enables interrupts and doing that with timekeeping
@@ -122,7 +127,7 @@
 	WARN_ON(!irqs_disabled());
 	/*
 	 * timekeeping_resume() that will be called by tick_unfreeze() for the
-	 * last CPU executing it calls functions containing RCU read-side
+	 * first CPU executing it calls functions containing RCU read-side
 	 * critical sections, so tell RCU about that.
 	 */
 	RCU_NONIDLE(tick_unfreeze());
diff --git a/drivers/crypto/nx/nx-aes-ccm.c b/drivers/crypto/nx/nx-aes-ccm.c
index 67f8081..e4311ce 100644
--- a/drivers/crypto/nx/nx-aes-ccm.c
+++ b/drivers/crypto/nx/nx-aes-ccm.c
@@ -494,8 +494,9 @@
 static int ccm4309_aes_nx_encrypt(struct aead_request *req)
 {
 	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	struct nx_gcm_rctx *rctx = aead_request_ctx(req);
 	struct blkcipher_desc desc;
-	u8 *iv = nx_ctx->priv.ccm.iv;
+	u8 *iv = rctx->iv;
 
 	iv[0] = 3;
 	memcpy(iv + 1, nx_ctx->priv.ccm.nonce, 3);
@@ -525,8 +526,9 @@
 static int ccm4309_aes_nx_decrypt(struct aead_request *req)
 {
 	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	struct nx_gcm_rctx *rctx = aead_request_ctx(req);
 	struct blkcipher_desc desc;
-	u8 *iv = nx_ctx->priv.ccm.iv;
+	u8 *iv = rctx->iv;
 
 	iv[0] = 3;
 	memcpy(iv + 1, nx_ctx->priv.ccm.nonce, 3);
diff --git a/drivers/crypto/nx/nx-aes-ctr.c b/drivers/crypto/nx/nx-aes-ctr.c
index 2617cd4..dd7e9f3 100644
--- a/drivers/crypto/nx/nx-aes-ctr.c
+++ b/drivers/crypto/nx/nx-aes-ctr.c
@@ -72,7 +72,7 @@
 	if (key_len < CTR_RFC3686_NONCE_SIZE)
 		return -EINVAL;
 
-	memcpy(nx_ctx->priv.ctr.iv,
+	memcpy(nx_ctx->priv.ctr.nonce,
 	       in_key + key_len - CTR_RFC3686_NONCE_SIZE,
 	       CTR_RFC3686_NONCE_SIZE);
 
@@ -131,14 +131,15 @@
 				unsigned int           nbytes)
 {
 	struct nx_crypto_ctx *nx_ctx = crypto_blkcipher_ctx(desc->tfm);
-	u8 *iv = nx_ctx->priv.ctr.iv;
+	u8 iv[16];
 
+	memcpy(iv, nx_ctx->priv.ctr.nonce, CTR_RFC3686_IV_SIZE);
 	memcpy(iv + CTR_RFC3686_NONCE_SIZE,
 	       desc->info, CTR_RFC3686_IV_SIZE);
 	iv[12] = iv[13] = iv[14] = 0;
 	iv[15] = 1;
 
-	desc->info = nx_ctx->priv.ctr.iv;
+	desc->info = iv;
 
 	return ctr_aes_nx_crypt(desc, dst, src, nbytes);
 }
diff --git a/drivers/crypto/nx/nx-aes-gcm.c b/drivers/crypto/nx/nx-aes-gcm.c
index 08ac6d4..92c993f 100644
--- a/drivers/crypto/nx/nx-aes-gcm.c
+++ b/drivers/crypto/nx/nx-aes-gcm.c
@@ -317,6 +317,7 @@
 static int gcm_aes_nx_crypt(struct aead_request *req, int enc)
 {
 	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	struct nx_gcm_rctx *rctx = aead_request_ctx(req);
 	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
 	struct blkcipher_desc desc;
 	unsigned int nbytes = req->cryptlen;
@@ -326,7 +327,7 @@
 
 	spin_lock_irqsave(&nx_ctx->lock, irq_flags);
 
-	desc.info = nx_ctx->priv.gcm.iv;
+	desc.info = rctx->iv;
 	/* initialize the counter */
 	*(u32 *)(desc.info + NX_GCM_CTR_OFFSET) = 1;
 
@@ -424,8 +425,8 @@
 
 static int gcm_aes_nx_encrypt(struct aead_request *req)
 {
-	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
-	char *iv = nx_ctx->priv.gcm.iv;
+	struct nx_gcm_rctx *rctx = aead_request_ctx(req);
+	char *iv = rctx->iv;
 
 	memcpy(iv, req->iv, 12);
 
@@ -434,8 +435,8 @@
 
 static int gcm_aes_nx_decrypt(struct aead_request *req)
 {
-	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
-	char *iv = nx_ctx->priv.gcm.iv;
+	struct nx_gcm_rctx *rctx = aead_request_ctx(req);
+	char *iv = rctx->iv;
 
 	memcpy(iv, req->iv, 12);
 
@@ -445,7 +446,8 @@
 static int gcm4106_aes_nx_encrypt(struct aead_request *req)
 {
 	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
-	char *iv = nx_ctx->priv.gcm.iv;
+	struct nx_gcm_rctx *rctx = aead_request_ctx(req);
+	char *iv = rctx->iv;
 	char *nonce = nx_ctx->priv.gcm.nonce;
 
 	memcpy(iv, nonce, NX_GCM4106_NONCE_LEN);
@@ -457,7 +459,8 @@
 static int gcm4106_aes_nx_decrypt(struct aead_request *req)
 {
 	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
-	char *iv = nx_ctx->priv.gcm.iv;
+	struct nx_gcm_rctx *rctx = aead_request_ctx(req);
+	char *iv = rctx->iv;
 	char *nonce = nx_ctx->priv.gcm.nonce;
 
 	memcpy(iv, nonce, NX_GCM4106_NONCE_LEN);
diff --git a/drivers/crypto/nx/nx-aes-xcbc.c b/drivers/crypto/nx/nx-aes-xcbc.c
index 8c2faff..c2f7d4b 100644
--- a/drivers/crypto/nx/nx-aes-xcbc.c
+++ b/drivers/crypto/nx/nx-aes-xcbc.c
@@ -42,6 +42,7 @@
 			   unsigned int         key_len)
 {
 	struct nx_crypto_ctx *nx_ctx = crypto_shash_ctx(desc);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
 
 	switch (key_len) {
 	case AES_KEYSIZE_128:
@@ -51,7 +52,7 @@
 		return -EINVAL;
 	}
 
-	memcpy(nx_ctx->priv.xcbc.key, in_key, key_len);
+	memcpy(csbcpb->cpb.aes_xcbc.key, in_key, key_len);
 
 	return 0;
 }
@@ -148,32 +149,29 @@
 	return rc;
 }
 
-static int nx_xcbc_init(struct shash_desc *desc)
+static int nx_crypto_ctx_aes_xcbc_init2(struct crypto_tfm *tfm)
 {
-	struct xcbc_state *sctx = shash_desc_ctx(desc);
-	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
 	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
-	struct nx_sg *out_sg;
-	int len;
+	int err;
+
+	err = nx_crypto_ctx_aes_xcbc_init(tfm);
+	if (err)
+		return err;
 
 	nx_ctx_init(nx_ctx, HCOP_FC_AES);
 
-	memset(sctx, 0, sizeof *sctx);
-
 	NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_128);
 	csbcpb->cpb.hdr.mode = NX_MODE_AES_XCBC_MAC;
 
-	memcpy(csbcpb->cpb.aes_xcbc.key, nx_ctx->priv.xcbc.key, AES_BLOCK_SIZE);
-	memset(nx_ctx->priv.xcbc.key, 0, sizeof *nx_ctx->priv.xcbc.key);
+	return 0;
+}
 
-	len = AES_BLOCK_SIZE;
-	out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
-				  &len, nx_ctx->ap->sglen);
+static int nx_xcbc_init(struct shash_desc *desc)
+{
+	struct xcbc_state *sctx = shash_desc_ctx(desc);
 
-	if (len != AES_BLOCK_SIZE)
-		return -EINVAL;
-
-	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+	memset(sctx, 0, sizeof *sctx);
 
 	return 0;
 }
@@ -186,6 +184,7 @@
 	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
 	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
 	struct nx_sg *in_sg;
+	struct nx_sg *out_sg;
 	u32 to_process = 0, leftover, total;
 	unsigned int max_sg_len;
 	unsigned long irq_flags;
@@ -213,6 +212,17 @@
 	max_sg_len = min_t(u64, max_sg_len,
 				nx_ctx->ap->databytelen/NX_PAGE_SIZE);
 
+	data_len = AES_BLOCK_SIZE;
+	out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+				  &len, nx_ctx->ap->sglen);
+
+	if (data_len != AES_BLOCK_SIZE) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
 	do {
 		to_process = total - to_process;
 		to_process = to_process & ~(AES_BLOCK_SIZE - 1);
@@ -235,8 +245,10 @@
 						(u8 *) sctx->buffer,
 						&data_len,
 						max_sg_len);
-			if (data_len != sctx->count)
-				return -EINVAL;
+			if (data_len != sctx->count) {
+				rc = -EINVAL;
+				goto out;
+			}
 		}
 
 		data_len = to_process - sctx->count;
@@ -245,8 +257,10 @@
 					&data_len,
 					max_sg_len);
 
-		if (data_len != to_process - sctx->count)
-			return -EINVAL;
+		if (data_len != to_process - sctx->count) {
+			rc = -EINVAL;
+			goto out;
+		}
 
 		nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) *
 					sizeof(struct nx_sg);
@@ -325,15 +339,19 @@
 	in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *)sctx->buffer,
 				 &len, nx_ctx->ap->sglen);
 
-	if (len != sctx->count)
-		return -EINVAL;
+	if (len != sctx->count) {
+		rc = -EINVAL;
+		goto out;
+	}
 
 	len = AES_BLOCK_SIZE;
 	out_sg = nx_build_sg_list(nx_ctx->out_sg, out, &len,
 				  nx_ctx->ap->sglen);
 
-	if (len != AES_BLOCK_SIZE)
-		return -EINVAL;
+	if (len != AES_BLOCK_SIZE) {
+		rc = -EINVAL;
+		goto out;
+	}
 
 	nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
 	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
@@ -372,7 +390,7 @@
 		.cra_blocksize   = AES_BLOCK_SIZE,
 		.cra_module      = THIS_MODULE,
 		.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
-		.cra_init        = nx_crypto_ctx_aes_xcbc_init,
+		.cra_init        = nx_crypto_ctx_aes_xcbc_init2,
 		.cra_exit        = nx_crypto_ctx_exit,
 	}
 };
diff --git a/drivers/crypto/nx/nx-sha256.c b/drivers/crypto/nx/nx-sha256.c
index 4e91bdb..08f8d5c 100644
--- a/drivers/crypto/nx/nx-sha256.c
+++ b/drivers/crypto/nx/nx-sha256.c
@@ -29,34 +29,28 @@
 #include "nx.h"
 
 
-static int nx_sha256_init(struct shash_desc *desc)
+static int nx_crypto_ctx_sha256_init(struct crypto_tfm *tfm)
 {
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
-	struct nx_sg *out_sg;
-	int len;
-	u32 max_sg_len;
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
+	int err;
+
+	err = nx_crypto_ctx_sha_init(tfm);
+	if (err)
+		return err;
 
 	nx_ctx_init(nx_ctx, HCOP_FC_SHA);
 
-	memset(sctx, 0, sizeof *sctx);
-
 	nx_ctx->ap = &nx_ctx->props[NX_PROPS_SHA256];
 
 	NX_CPB_SET_DIGEST_SIZE(nx_ctx->csbcpb, NX_DS_SHA256);
 
-	max_sg_len = min_t(u64, nx_ctx->ap->sglen,
-			nx_driver.of.max_sg_len/sizeof(struct nx_sg));
-	max_sg_len = min_t(u64, max_sg_len,
-			nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+	return 0;
+}
 
-	len = SHA256_DIGEST_SIZE;
-	out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
-				  &len, max_sg_len);
-	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+static int nx_sha256_init(struct shash_desc *desc) {
+	struct sha256_state *sctx = shash_desc_ctx(desc);
 
-	if (len != SHA256_DIGEST_SIZE)
-		return -EINVAL;
+	memset(sctx, 0, sizeof *sctx);
 
 	sctx->state[0] = __cpu_to_be32(SHA256_H0);
 	sctx->state[1] = __cpu_to_be32(SHA256_H1);
@@ -78,6 +72,7 @@
 	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
 	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
 	struct nx_sg *in_sg;
+	struct nx_sg *out_sg;
 	u64 to_process = 0, leftover, total;
 	unsigned long irq_flags;
 	int rc = 0;
@@ -108,6 +103,16 @@
 	max_sg_len = min_t(u64, max_sg_len,
 			nx_ctx->ap->databytelen/NX_PAGE_SIZE);
 
+	data_len = SHA256_DIGEST_SIZE;
+	out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+				  &data_len, max_sg_len);
+	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+	if (data_len != SHA256_DIGEST_SIZE) {
+		rc = -EINVAL;
+		goto out;
+	}
+
 	do {
 		/*
 		 * to_process: the SHA256_BLOCK_SIZE data chunk to process in
@@ -282,7 +287,7 @@
 		.cra_blocksize   = SHA256_BLOCK_SIZE,
 		.cra_module      = THIS_MODULE,
 		.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
-		.cra_init        = nx_crypto_ctx_sha_init,
+		.cra_init        = nx_crypto_ctx_sha256_init,
 		.cra_exit        = nx_crypto_ctx_exit,
 	}
 };
diff --git a/drivers/crypto/nx/nx-sha512.c b/drivers/crypto/nx/nx-sha512.c
index e6a58d2..aff0fe5 100644
--- a/drivers/crypto/nx/nx-sha512.c
+++ b/drivers/crypto/nx/nx-sha512.c
@@ -28,34 +28,29 @@
 #include "nx.h"
 
 
-static int nx_sha512_init(struct shash_desc *desc)
+static int nx_crypto_ctx_sha512_init(struct crypto_tfm *tfm)
 {
-	struct sha512_state *sctx = shash_desc_ctx(desc);
-	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
-	struct nx_sg *out_sg;
-	int len;
-	u32 max_sg_len;
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
+	int err;
+
+	err = nx_crypto_ctx_sha_init(tfm);
+	if (err)
+		return err;
 
 	nx_ctx_init(nx_ctx, HCOP_FC_SHA);
 
-	memset(sctx, 0, sizeof *sctx);
-
 	nx_ctx->ap = &nx_ctx->props[NX_PROPS_SHA512];
 
 	NX_CPB_SET_DIGEST_SIZE(nx_ctx->csbcpb, NX_DS_SHA512);
 
-	max_sg_len = min_t(u64, nx_ctx->ap->sglen,
-			nx_driver.of.max_sg_len/sizeof(struct nx_sg));
-	max_sg_len = min_t(u64, max_sg_len,
-			nx_ctx->ap->databytelen/NX_PAGE_SIZE);
+	return 0;
+}
 
-	len = SHA512_DIGEST_SIZE;
-	out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
-				  &len, max_sg_len);
-	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+static int nx_sha512_init(struct shash_desc *desc)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
 
-	if (len != SHA512_DIGEST_SIZE)
-		return -EINVAL;
+	memset(sctx, 0, sizeof *sctx);
 
 	sctx->state[0] = __cpu_to_be64(SHA512_H0);
 	sctx->state[1] = __cpu_to_be64(SHA512_H1);
@@ -77,6 +72,7 @@
 	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
 	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
 	struct nx_sg *in_sg;
+	struct nx_sg *out_sg;
 	u64 to_process, leftover = 0, total;
 	unsigned long irq_flags;
 	int rc = 0;
@@ -107,6 +103,16 @@
 	max_sg_len = min_t(u64, max_sg_len,
 			nx_ctx->ap->databytelen/NX_PAGE_SIZE);
 
+	data_len = SHA512_DIGEST_SIZE;
+	out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+				  &data_len, max_sg_len);
+	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+	if (data_len != SHA512_DIGEST_SIZE) {
+		rc = -EINVAL;
+		goto out;
+	}
+
 	do {
 		/*
 		 * to_process: the SHA512_BLOCK_SIZE data chunk to process in
@@ -288,7 +294,7 @@
 		.cra_blocksize   = SHA512_BLOCK_SIZE,
 		.cra_module      = THIS_MODULE,
 		.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
-		.cra_init        = nx_crypto_ctx_sha_init,
+		.cra_init        = nx_crypto_ctx_sha512_init,
 		.cra_exit        = nx_crypto_ctx_exit,
 	}
 };
diff --git a/drivers/crypto/nx/nx.c b/drivers/crypto/nx/nx.c
index f6198f2..4369713 100644
--- a/drivers/crypto/nx/nx.c
+++ b/drivers/crypto/nx/nx.c
@@ -713,12 +713,15 @@
 /* entry points from the crypto tfm initializers */
 int nx_crypto_ctx_aes_ccm_init(struct crypto_tfm *tfm)
 {
+	crypto_aead_set_reqsize(__crypto_aead_cast(tfm),
+				sizeof(struct nx_ccm_rctx));
 	return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES,
 				  NX_MODE_AES_CCM);
 }
 
 int nx_crypto_ctx_aes_gcm_init(struct crypto_aead *tfm)
 {
+	crypto_aead_set_reqsize(tfm, sizeof(struct nx_gcm_rctx));
 	return nx_crypto_ctx_init(crypto_aead_ctx(tfm), NX_FC_AES,
 				  NX_MODE_AES_GCM);
 }
diff --git a/drivers/crypto/nx/nx.h b/drivers/crypto/nx/nx.h
index de3ea87..cdff03a 100644
--- a/drivers/crypto/nx/nx.h
+++ b/drivers/crypto/nx/nx.h
@@ -2,6 +2,8 @@
 #ifndef __NX_H__
 #define __NX_H__
 
+#include <crypto/ctr.h>
+
 #define NX_NAME		"nx-crypto"
 #define NX_STRING	"IBM Power7+ Nest Accelerator Crypto Driver"
 #define NX_VERSION	"1.0"
@@ -91,8 +93,11 @@
 
 #define NX_GCM4106_NONCE_LEN		(4)
 #define NX_GCM_CTR_OFFSET		(12)
-struct nx_gcm_priv {
+struct nx_gcm_rctx {
 	u8 iv[16];
+};
+
+struct nx_gcm_priv {
 	u8 iauth_tag[16];
 	u8 nonce[NX_GCM4106_NONCE_LEN];
 };
@@ -100,8 +105,11 @@
 #define NX_CCM_AES_KEY_LEN		(16)
 #define NX_CCM4309_AES_KEY_LEN		(19)
 #define NX_CCM4309_NONCE_LEN		(3)
-struct nx_ccm_priv {
+struct nx_ccm_rctx {
 	u8 iv[16];
+};
+
+struct nx_ccm_priv {
 	u8 b0[16];
 	u8 iauth_tag[16];
 	u8 oauth_tag[16];
@@ -113,7 +121,7 @@
 };
 
 struct nx_ctr_priv {
-	u8 iv[16];
+	u8 nonce[CTR_RFC3686_NONCE_SIZE];
 };
 
 struct nx_crypto_ctx {
diff --git a/drivers/crypto/omap-des.c b/drivers/crypto/omap-des.c
index 4630709..0a70e46 100644
--- a/drivers/crypto/omap-des.c
+++ b/drivers/crypto/omap-des.c
@@ -536,9 +536,6 @@
 	dmaengine_terminate_all(dd->dma_lch_in);
 	dmaengine_terminate_all(dd->dma_lch_out);
 
-	dma_unmap_sg(dd->dev, dd->in_sg, dd->in_sg_len, DMA_TO_DEVICE);
-	dma_unmap_sg(dd->dev, dd->out_sg, dd->out_sg_len, DMA_FROM_DEVICE);
-
 	return err;
 }
 
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 1022c2e..cf1c87f 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -1746,4 +1746,4 @@
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller core driver");
 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
-MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
+MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>");
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 4fd9961..d425374 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -305,10 +305,17 @@
 	return ret;
 }
 
-static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem)
+static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem,
+	int len)
 {
 	struct cper_mem_err_compact cmem;
 
+	/* Don't trust UEFI 2.1/2.2 structure with bad validation bits */
+	if (len == sizeof(struct cper_sec_mem_err_old) &&
+	    (mem->validation_bits & ~(CPER_MEM_VALID_RANK_NUMBER - 1))) {
+		pr_err(FW_WARN "valid bits set for fields beyond structure\n");
+		return;
+	}
 	if (mem->validation_bits & CPER_MEM_VALID_ERROR_STATUS)
 		printk("%s""error_status: 0x%016llx\n", pfx, mem->error_status);
 	if (mem->validation_bits & CPER_MEM_VALID_PA)
@@ -405,8 +412,10 @@
 	} else if (!uuid_le_cmp(*sec_type, CPER_SEC_PLATFORM_MEM)) {
 		struct cper_sec_mem_err *mem_err = (void *)(gdata + 1);
 		printk("%s""section_type: memory error\n", newpfx);
-		if (gdata->error_data_length >= sizeof(*mem_err))
-			cper_print_mem(newpfx, mem_err);
+		if (gdata->error_data_length >=
+		    sizeof(struct cper_sec_mem_err_old))
+			cper_print_mem(newpfx, mem_err,
+				       gdata->error_data_length);
 		else
 			goto err_section_too_small;
 	} else if (!uuid_le_cmp(*sec_type, CPER_SEC_PCIE)) {
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 7a3cb1f..4630a81 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -87,6 +87,15 @@
 	struct brcmstb_gpio_bank *bank;
 	int ret = 0;
 
+	if (!priv) {
+		dev_err(&pdev->dev, "called %s without drvdata!\n", __func__);
+		return -EFAULT;
+	}
+
+	/*
+	 * You can lose return values below, but we report all errors, and it's
+	 * more important to actually perform all of the steps.
+	 */
 	list_for_each(pos, &priv->bank_list) {
 		bank = list_entry(pos, struct brcmstb_gpio_bank, node);
 		ret = bgpio_remove(&bank->bgc);
@@ -143,6 +152,8 @@
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+	INIT_LIST_HEAD(&priv->bank_list);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg_base = devm_ioremap_resource(dev, res);
@@ -153,7 +164,6 @@
 	priv->reg_base = reg_base;
 	priv->pdev = pdev;
 
-	INIT_LIST_HEAD(&priv->bank_list);
 	if (brcmstb_gpio_sanity_check_banks(dev, np, res))
 		return -EINVAL;
 
@@ -221,8 +231,6 @@
 	dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
 			priv->num_banks, priv->gpio_base, gpio_base - 1);
 
-	platform_set_drvdata(pdev, priv);
-
 	return 0;
 
 fail:
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index c5e05c8..c246ac3 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -578,15 +578,13 @@
 		writel_relaxed(~0, &g->clr_falling);
 		writel_relaxed(~0, &g->clr_rising);
 
-		/* set up all irqs in this bank */
-		irq_set_chained_handler(bank_irq, gpio_irq_handler);
-
 		/*
 		 * Each chip handles 32 gpios, and each irq bank consists of 16
 		 * gpio irqs. Pass the irq bank's corresponding controller to
 		 * the chained irq handler.
 		 */
-		irq_set_handler_data(bank_irq, &chips[gpio / 32]);
+		irq_set_chained_handler_and_data(bank_irq, gpio_irq_handler,
+						 &chips[gpio / 32]);
 
 		binten |= BIT(bank);
 	}
diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
index aed4ca93..7d3c90e 100644
--- a/drivers/gpio/gpio-max732x.c
+++ b/drivers/gpio/gpio-max732x.c
@@ -603,6 +603,7 @@
 	gc->base = gpio_start;
 	gc->ngpio = port;
 	gc->label = chip->client->name;
+	gc->dev = &chip->client->dev;
 	gc->owner = THIS_MODULE;
 
 	return port;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index b0c57d5..61a731f 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -500,8 +500,10 @@
 
 	spin_lock_irqsave(&bank->lock, flags);
 	retval = omap_set_gpio_triggering(bank, offset, type);
-	if (retval)
+	if (retval) {
+		spin_unlock_irqrestore(&bank->lock, flags);
 		goto error;
+	}
 	omap_gpio_init_irq(bank, offset);
 	if (!omap_gpio_is_input(bank, offset)) {
 		spin_unlock_irqrestore(&bank->lock, flags);
@@ -1185,6 +1187,7 @@
 	bank->irq = res->start;
 	bank->dev = dev;
 	bank->chip.dev = dev;
+	bank->chip.owner = THIS_MODULE;
 	bank->dbck_flag = pdata->dbck_flag;
 	bank->stride = pdata->bank_stride;
 	bank->width = pdata->bank_width;
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index d233eb3..50caeb1 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -570,6 +570,10 @@
 				"could not connect irqchip to gpiochip\n");
 			return ret;
 		}
+
+		gpiochip_set_chained_irqchip(&chip->gpio_chip,
+					     &pca953x_irq_chip,
+					     client->irq, NULL);
 	}
 
 	return 0;
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 77fe5d3..d5284df 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -220,9 +220,9 @@
 	if (!chip->gpio_width[1])
 		return;
 
-	xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + XGPIO_TRI_OFFSET,
+	xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET,
 		       chip->gpio_state[1]);
-	xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + XGPIO_TRI_OFFSET,
+	xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET,
 		       chip->gpio_dir[1]);
 }
 
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 2e87c4b..a788823 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -757,6 +757,7 @@
 	gpiochip_remove(&gpio->chip);
 	clk_disable_unprepare(gpio->clk);
 	device_set_wakeup_capable(&pdev->dev, 0);
+	pm_runtime_disable(&pdev->dev);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 0165783..e9fde72 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -1614,6 +1614,9 @@
 #define AMDGPU_MAX_VCE_HANDLES	16
 #define AMDGPU_VCE_FIRMWARE_OFFSET 256
 
+#define AMDGPU_VCE_HARVEST_VCE0 (1 << 0)
+#define AMDGPU_VCE_HARVEST_VCE1 (1 << 1)
+
 struct amdgpu_vce {
 	struct amdgpu_bo	*vcpu_bo;
 	uint64_t		gpu_addr;
@@ -1626,6 +1629,7 @@
 	const struct firmware	*fw;	/* VCE firmware */
 	struct amdgpu_ring	ring[AMDGPU_MAX_VCE_RINGS];
 	struct amdgpu_irq_src	irq;
+	unsigned		harvest_config;
 };
 
 /*
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
index d63135b..1f040d8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
@@ -669,6 +669,7 @@
 static int amdgpu_cs_dependencies(struct amdgpu_device *adev,
 				  struct amdgpu_cs_parser *p)
 {
+	struct amdgpu_fpriv *fpriv = p->filp->driver_priv;
 	struct amdgpu_ib *ib;
 	int i, j, r;
 
@@ -694,6 +695,7 @@
 		for (j = 0; j < num_deps; ++j) {
 			struct amdgpu_fence *fence;
 			struct amdgpu_ring *ring;
+			struct amdgpu_ctx *ctx;
 
 			r = amdgpu_cs_get_ring(adev, deps[j].ip_type,
 					       deps[j].ip_instance,
@@ -701,14 +703,21 @@
 			if (r)
 				return r;
 
+			ctx = amdgpu_ctx_get(fpriv, deps[j].ctx_id);
+			if (ctx == NULL)
+				return -EINVAL;
+
 			r = amdgpu_fence_recreate(ring, p->filp,
 						  deps[j].handle,
 						  &fence);
-			if (r)
+			if (r) {
+				amdgpu_ctx_put(ctx);
 				return r;
+			}
 
 			amdgpu_sync_fence(&ib->sync, fence);
 			amdgpu_fence_unref(&fence);
+			amdgpu_ctx_put(ctx);
 		}
 	}
 
@@ -808,12 +817,16 @@
 
 	r = amdgpu_cs_get_ring(adev, wait->in.ip_type, wait->in.ip_instance,
 			       wait->in.ring, &ring);
-	if (r)
+	if (r) {
+		amdgpu_ctx_put(ctx);
 		return r;
+	}
 
 	r = amdgpu_fence_recreate(ring, filp, wait->in.handle, &fence);
-	if (r)
+	if (r) {
+		amdgpu_ctx_put(ctx);
 		return r;
+	}
 
 	r = fence_wait_timeout(&fence->base, true, timeout);
 	amdgpu_fence_unref(&fence);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index ba46be3..d79009b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -1207,10 +1207,15 @@
 		} else {
 			if (adev->ip_blocks[i].funcs->early_init) {
 				r = adev->ip_blocks[i].funcs->early_init((void *)adev);
-				if (r)
+				if (r == -ENOENT)
+					adev->ip_block_enabled[i] = false;
+				else if (r)
 					return r;
+				else
+					adev->ip_block_enabled[i] = true;
+			} else {
+				adev->ip_block_enabled[i] = true;
 			}
-			adev->ip_block_enabled[i] = true;
 		}
 	}
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index 5533434..31ad444 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -459,6 +459,7 @@
 		memcpy(&dev_info.cu_bitmap[0], &cu_info.bitmap[0], sizeof(cu_info.bitmap));
 		dev_info.vram_type = adev->mc.vram_type;
 		dev_info.vram_bit_width = adev->mc.vram_width;
+		dev_info.vce_harvest_config = adev->vce.harvest_config;
 
 		return copy_to_user(out, &dev_info,
 				    min((size_t)size, sizeof(dev_info))) ? -EFAULT : 0;
diff --git a/drivers/gpu/drm/amd/amdgpu/cz_dpm.c b/drivers/gpu/drm/amd/amdgpu/cz_dpm.c
index f75a31d..ace870a 100644
--- a/drivers/gpu/drm/amd/amdgpu/cz_dpm.c
+++ b/drivers/gpu/drm/amd/amdgpu/cz_dpm.c
@@ -494,29 +494,67 @@
 	amdgpu_free_extended_power_table(adev);
 }
 
+#define ixSMUSVI_NB_CURRENTVID 0xD8230044
+#define CURRENT_NB_VID_MASK 0xff000000
+#define CURRENT_NB_VID__SHIFT 24
+#define ixSMUSVI_GFX_CURRENTVID  0xD8230048
+#define CURRENT_GFX_VID_MASK 0xff000000
+#define CURRENT_GFX_VID__SHIFT 24
+
 static void
 cz_dpm_debugfs_print_current_performance_level(struct amdgpu_device *adev,
 					       struct seq_file *m)
 {
+	struct cz_power_info *pi = cz_get_pi(adev);
 	struct amdgpu_clock_voltage_dependency_table *table =
 		&adev->pm.dpm.dyn_state.vddc_dependency_on_sclk;
-	u32 current_index =
-		(RREG32_SMC(ixTARGET_AND_CURRENT_PROFILE_INDEX) &
-		TARGET_AND_CURRENT_PROFILE_INDEX__CURR_SCLK_INDEX_MASK) >>
-		TARGET_AND_CURRENT_PROFILE_INDEX__CURR_SCLK_INDEX__SHIFT;
-	u32 sclk, tmp;
-	u16 vddc;
+	struct amdgpu_uvd_clock_voltage_dependency_table *uvd_table =
+		&adev->pm.dpm.dyn_state.uvd_clock_voltage_dependency_table;
+	struct amdgpu_vce_clock_voltage_dependency_table *vce_table =
+		&adev->pm.dpm.dyn_state.vce_clock_voltage_dependency_table;
+	u32 sclk_index = REG_GET_FIELD(RREG32_SMC(ixTARGET_AND_CURRENT_PROFILE_INDEX),
+				       TARGET_AND_CURRENT_PROFILE_INDEX, CURR_SCLK_INDEX);
+	u32 uvd_index = REG_GET_FIELD(RREG32_SMC(ixTARGET_AND_CURRENT_PROFILE_INDEX_2),
+				      TARGET_AND_CURRENT_PROFILE_INDEX_2, CURR_UVD_INDEX);
+	u32 vce_index = REG_GET_FIELD(RREG32_SMC(ixTARGET_AND_CURRENT_PROFILE_INDEX_2),
+				      TARGET_AND_CURRENT_PROFILE_INDEX_2, CURR_VCE_INDEX);
+	u32 sclk, vclk, dclk, ecclk, tmp;
+	u16 vddnb, vddgfx;
 
-	if (current_index >= NUM_SCLK_LEVELS) {
-		seq_printf(m, "invalid dpm profile %d\n", current_index);
+	if (sclk_index >= NUM_SCLK_LEVELS) {
+		seq_printf(m, "invalid sclk dpm profile %d\n", sclk_index);
 	} else {
-		sclk = table->entries[current_index].clk;
-		tmp = (RREG32_SMC(ixSMU_VOLTAGE_STATUS) &
-			SMU_VOLTAGE_STATUS__SMU_VOLTAGE_CURRENT_LEVEL_MASK) >>
-			SMU_VOLTAGE_STATUS__SMU_VOLTAGE_CURRENT_LEVEL__SHIFT;
-		vddc = cz_convert_8bit_index_to_voltage(adev, (u16)tmp);
-		seq_printf(m, "power level %d    sclk: %u vddc: %u\n",
-			   current_index, sclk, vddc);
+		sclk = table->entries[sclk_index].clk;
+		seq_printf(m, "%u sclk: %u\n", sclk_index, sclk);
+	}
+
+	tmp = (RREG32_SMC(ixSMUSVI_NB_CURRENTVID) &
+	       CURRENT_NB_VID_MASK) >> CURRENT_NB_VID__SHIFT;
+	vddnb = cz_convert_8bit_index_to_voltage(adev, (u16)tmp);
+	tmp = (RREG32_SMC(ixSMUSVI_GFX_CURRENTVID) &
+	       CURRENT_GFX_VID_MASK) >> CURRENT_GFX_VID__SHIFT;
+	vddgfx = cz_convert_8bit_index_to_voltage(adev, (u16)tmp);
+	seq_printf(m, "vddnb: %u vddgfx: %u\n", vddnb, vddgfx);
+
+	seq_printf(m, "uvd    %sabled\n", pi->uvd_power_gated ? "dis" : "en");
+	if (!pi->uvd_power_gated) {
+		if (uvd_index >= CZ_MAX_HARDWARE_POWERLEVELS) {
+			seq_printf(m, "invalid uvd dpm level %d\n", uvd_index);
+		} else {
+			vclk = uvd_table->entries[uvd_index].vclk;
+			dclk = uvd_table->entries[uvd_index].dclk;
+			seq_printf(m, "%u uvd vclk: %u dclk: %u\n", uvd_index, vclk, dclk);
+		}
+	}
+
+	seq_printf(m, "vce    %sabled\n", pi->vce_power_gated ? "dis" : "en");
+	if (!pi->vce_power_gated) {
+		if (vce_index >= CZ_MAX_HARDWARE_POWERLEVELS) {
+			seq_printf(m, "invalid vce dpm level %d\n", vce_index);
+		} else {
+			ecclk = vce_table->entries[vce_index].ecclk;
+			seq_printf(m, "%u vce ecclk: %u\n", vce_index, ecclk);
+		}
 	}
 }
 
@@ -1679,25 +1717,31 @@
 	if (ret)
 		return ret;
 
-	DRM_INFO("DPM unforce state min=%d, max=%d.\n",
-			pi->sclk_dpm.soft_min_clk,
-			pi->sclk_dpm.soft_max_clk);
+	DRM_DEBUG("DPM unforce state min=%d, max=%d.\n",
+		  pi->sclk_dpm.soft_min_clk,
+		  pi->sclk_dpm.soft_max_clk);
 
 	return 0;
 }
 
 static int cz_dpm_force_dpm_level(struct amdgpu_device *adev,
-				enum amdgpu_dpm_forced_level level)
+				  enum amdgpu_dpm_forced_level level)
 {
 	int ret = 0;
 
 	switch (level) {
 	case AMDGPU_DPM_FORCED_LEVEL_HIGH:
+		ret = cz_dpm_unforce_dpm_levels(adev);
+		if (ret)
+			return ret;
 		ret = cz_dpm_force_highest(adev);
 		if (ret)
 			return ret;
 		break;
 	case AMDGPU_DPM_FORCED_LEVEL_LOW:
+		ret = cz_dpm_unforce_dpm_levels(adev);
+		if (ret)
+			return ret;
 		ret = cz_dpm_force_lowest(adev);
 		if (ret)
 			return ret;
@@ -1711,6 +1755,8 @@
 		break;
 	}
 
+	adev->pm.dpm.forced_level = level;
+
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
index 6e77964..e70a26f 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
@@ -2632,6 +2632,7 @@
 	struct drm_device *dev = crtc->dev;
 	struct amdgpu_device *adev = dev->dev_private;
 	struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc);
+	unsigned type;
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
@@ -2640,6 +2641,9 @@
 		dce_v10_0_vga_enable(crtc, true);
 		amdgpu_atombios_crtc_blank(crtc, ATOM_DISABLE);
 		dce_v10_0_vga_enable(crtc, false);
+		/* Make sure VBLANK interrupt is still enabled */
+		type = amdgpu_crtc_idx_to_irq_type(adev, amdgpu_crtc->crtc_id);
+		amdgpu_irq_update(adev, &adev->crtc_irq, type);
 		drm_vblank_post_modeset(dev, amdgpu_crtc->crtc_id);
 		dce_v10_0_crtc_load_lut(crtc);
 		break;
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
index 7f7abb0..dcb402e 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
@@ -2631,6 +2631,7 @@
 	struct drm_device *dev = crtc->dev;
 	struct amdgpu_device *adev = dev->dev_private;
 	struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc);
+	unsigned type;
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
@@ -2639,6 +2640,9 @@
 		dce_v11_0_vga_enable(crtc, true);
 		amdgpu_atombios_crtc_blank(crtc, ATOM_DISABLE);
 		dce_v11_0_vga_enable(crtc, false);
+		/* Make sure VBLANK interrupt is still enabled */
+		type = amdgpu_crtc_idx_to_irq_type(adev, amdgpu_crtc->crtc_id);
+		amdgpu_irq_update(adev, &adev->crtc_irq, type);
 		drm_vblank_post_modeset(dev, amdgpu_crtc->crtc_id);
 		dce_v11_0_crtc_load_lut(crtc);
 		break;
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c
index 08387dfd..cc050a3 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c
@@ -2566,6 +2566,7 @@
 	struct drm_device *dev = crtc->dev;
 	struct amdgpu_device *adev = dev->dev_private;
 	struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc);
+	unsigned type;
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
@@ -2574,6 +2575,9 @@
 		dce_v8_0_vga_enable(crtc, true);
 		amdgpu_atombios_crtc_blank(crtc, ATOM_DISABLE);
 		dce_v8_0_vga_enable(crtc, false);
+		/* Make sure VBLANK interrupt is still enabled */
+		type = amdgpu_crtc_idx_to_irq_type(adev, amdgpu_crtc->crtc_id);
+		amdgpu_irq_update(adev, &adev->crtc_irq, type);
 		drm_vblank_post_modeset(dev, amdgpu_crtc->crtc_id);
 		dce_v8_0_crtc_load_lut(crtc);
 		break;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 7b683fb..1c7c992 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -1813,10 +1813,7 @@
 	u32 data, mask;
 
 	data = RREG32(mmCC_RB_BACKEND_DISABLE);
-	if (data & 1)
-		data &= CC_RB_BACKEND_DISABLE__BACKEND_DISABLE_MASK;
-	else
-		data = 0;
+	data &= CC_RB_BACKEND_DISABLE__BACKEND_DISABLE_MASK;
 
 	data |= RREG32(mmGC_USER_RB_BACKEND_DISABLE);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c
index d62c4002..d1064ca 100644
--- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c
@@ -35,6 +35,8 @@
 #include "oss/oss_2_0_d.h"
 #include "oss/oss_2_0_sh_mask.h"
 #include "gca/gfx_8_0_d.h"
+#include "smu/smu_7_1_2_d.h"
+#include "smu/smu_7_1_2_sh_mask.h"
 
 #define GRBM_GFX_INDEX__VCE_INSTANCE__SHIFT	0x04
 #define GRBM_GFX_INDEX__VCE_INSTANCE_MASK	0x10
@@ -112,6 +114,10 @@
 
 	mutex_lock(&adev->grbm_idx_mutex);
 	for (idx = 0; idx < 2; ++idx) {
+
+		if (adev->vce.harvest_config & (1 << idx))
+			continue;
+
 		if(idx == 0)
 			WREG32_P(mmGRBM_GFX_INDEX, 0,
 				~GRBM_GFX_INDEX__VCE_INSTANCE_MASK);
@@ -190,10 +196,52 @@
 	return 0;
 }
 
+#define ixVCE_HARVEST_FUSE_MACRO__ADDRESS     0xC0014074
+#define VCE_HARVEST_FUSE_MACRO__SHIFT       27
+#define VCE_HARVEST_FUSE_MACRO__MASK        0x18000000
+
+static unsigned vce_v3_0_get_harvest_config(struct amdgpu_device *adev)
+{
+	u32 tmp;
+	unsigned ret;
+
+	if (adev->flags & AMDGPU_IS_APU)
+		tmp = (RREG32_SMC(ixVCE_HARVEST_FUSE_MACRO__ADDRESS) &
+		       VCE_HARVEST_FUSE_MACRO__MASK) >>
+			VCE_HARVEST_FUSE_MACRO__SHIFT;
+	else
+		tmp = (RREG32_SMC(ixCC_HARVEST_FUSES) &
+		       CC_HARVEST_FUSES__VCE_DISABLE_MASK) >>
+			CC_HARVEST_FUSES__VCE_DISABLE__SHIFT;
+
+	switch (tmp) {
+	case 1:
+		ret = AMDGPU_VCE_HARVEST_VCE0;
+		break;
+	case 2:
+		ret = AMDGPU_VCE_HARVEST_VCE1;
+		break;
+	case 3:
+		ret = AMDGPU_VCE_HARVEST_VCE0 | AMDGPU_VCE_HARVEST_VCE1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
 static int vce_v3_0_early_init(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
+	adev->vce.harvest_config = vce_v3_0_get_harvest_config(adev);
+
+	if ((adev->vce.harvest_config &
+	     (AMDGPU_VCE_HARVEST_VCE0 | AMDGPU_VCE_HARVEST_VCE1)) ==
+	    (AMDGPU_VCE_HARVEST_VCE0 | AMDGPU_VCE_HARVEST_VCE1))
+		return -ENOENT;
+
 	vce_v3_0_set_ring_funcs(adev);
 	vce_v3_0_set_irq_funcs(adev);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c
index fa5a444..68552da 100644
--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -122,6 +122,32 @@
 	spin_unlock_irqrestore(&adev->smc_idx_lock, flags);
 }
 
+/* smu_8_0_d.h */
+#define mmMP0PUB_IND_INDEX                                                      0x180
+#define mmMP0PUB_IND_DATA                                                       0x181
+
+static u32 cz_smc_rreg(struct amdgpu_device *adev, u32 reg)
+{
+	unsigned long flags;
+	u32 r;
+
+	spin_lock_irqsave(&adev->smc_idx_lock, flags);
+	WREG32(mmMP0PUB_IND_INDEX, (reg));
+	r = RREG32(mmMP0PUB_IND_DATA);
+	spin_unlock_irqrestore(&adev->smc_idx_lock, flags);
+	return r;
+}
+
+static void cz_smc_wreg(struct amdgpu_device *adev, u32 reg, u32 v)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&adev->smc_idx_lock, flags);
+	WREG32(mmMP0PUB_IND_INDEX, (reg));
+	WREG32(mmMP0PUB_IND_DATA, (v));
+	spin_unlock_irqrestore(&adev->smc_idx_lock, flags);
+}
+
 static u32 vi_uvd_ctx_rreg(struct amdgpu_device *adev, u32 reg)
 {
 	unsigned long flags;
@@ -1222,8 +1248,13 @@
 	bool smc_enabled = false;
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
-	adev->smc_rreg = &vi_smc_rreg;
-	adev->smc_wreg = &vi_smc_wreg;
+	if (adev->flags & AMDGPU_IS_APU) {
+		adev->smc_rreg = &cz_smc_rreg;
+		adev->smc_wreg = &cz_smc_wreg;
+	} else {
+		adev->smc_rreg = &vi_smc_rreg;
+		adev->smc_wreg = &vi_smc_wreg;
+	}
 	adev->pcie_rreg = &vi_pcie_rreg;
 	adev->pcie_wreg = &vi_pcie_wreg;
 	adev->uvd_ctx_rreg = &vi_uvd_ctx_rreg;
diff --git a/drivers/gpu/drm/armada/armada_crtc.c b/drivers/gpu/drm/armada/armada_crtc.c
index 42d2ffa..01ffe9b 100644
--- a/drivers/gpu/drm/armada/armada_crtc.c
+++ b/drivers/gpu/drm/armada/armada_crtc.c
@@ -531,8 +531,6 @@
 
 	drm_crtc_vblank_off(crtc);
 
-	crtc->mode = *adj;
-
 	val = dcrtc->dumb_ctrl & ~CFG_DUMB_ENA;
 	if (val != dcrtc->dumb_ctrl) {
 		dcrtc->dumb_ctrl = val;
diff --git a/drivers/gpu/drm/armada/armada_gem.c b/drivers/gpu/drm/armada/armada_gem.c
index 580e10a..60a688e 100644
--- a/drivers/gpu/drm/armada/armada_gem.c
+++ b/drivers/gpu/drm/armada/armada_gem.c
@@ -69,8 +69,9 @@
 
 	if (dobj->obj.import_attach) {
 		/* We only ever display imported data */
-		dma_buf_unmap_attachment(dobj->obj.import_attach, dobj->sgt,
-					 DMA_TO_DEVICE);
+		if (dobj->sgt)
+			dma_buf_unmap_attachment(dobj->obj.import_attach,
+						 dobj->sgt, DMA_TO_DEVICE);
 		drm_prime_gem_destroy(&dobj->obj, NULL);
 	}
 
diff --git a/drivers/gpu/drm/armada/armada_overlay.c b/drivers/gpu/drm/armada/armada_overlay.c
index c5b06fd..e939fab 100644
--- a/drivers/gpu/drm/armada/armada_overlay.c
+++ b/drivers/gpu/drm/armada/armada_overlay.c
@@ -7,6 +7,7 @@
  * published by the Free Software Foundation.
  */
 #include <drm/drmP.h>
+#include <drm/drm_plane_helper.h>
 #include "armada_crtc.h"
 #include "armada_drm.h"
 #include "armada_fb.h"
@@ -85,16 +86,8 @@
 
 	if (fb)
 		armada_drm_queue_unref_work(dcrtc->crtc.dev, fb);
-}
 
-static unsigned armada_limit(int start, unsigned size, unsigned max)
-{
-	int end = start + size;
-	if (end < 0)
-		return 0;
-	if (start < 0)
-		start = 0;
-	return (unsigned)end > max ? max - start : end - start;
+	wake_up(&dplane->vbl.wait);
 }
 
 static int
@@ -105,26 +98,39 @@
 {
 	struct armada_plane *dplane = drm_to_armada_plane(plane);
 	struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
+	struct drm_rect src = {
+		.x1 = src_x,
+		.y1 = src_y,
+		.x2 = src_x + src_w,
+		.y2 = src_y + src_h,
+	};
+	struct drm_rect dest = {
+		.x1 = crtc_x,
+		.y1 = crtc_y,
+		.x2 = crtc_x + crtc_w,
+		.y2 = crtc_y + crtc_h,
+	};
+	const struct drm_rect clip = {
+		.x2 = crtc->mode.hdisplay,
+		.y2 = crtc->mode.vdisplay,
+	};
 	uint32_t val, ctrl0;
 	unsigned idx = 0;
+	bool visible;
 	int ret;
 
-	crtc_w = armada_limit(crtc_x, crtc_w, dcrtc->crtc.mode.hdisplay);
-	crtc_h = armada_limit(crtc_y, crtc_h, dcrtc->crtc.mode.vdisplay);
+	ret = drm_plane_helper_check_update(plane, crtc, fb, &src, &dest, &clip,
+					    0, INT_MAX, true, false, &visible);
+	if (ret)
+		return ret;
+
 	ctrl0 = CFG_DMA_FMT(drm_fb_to_armada_fb(fb)->fmt) |
 		CFG_DMA_MOD(drm_fb_to_armada_fb(fb)->mod) |
 		CFG_CBSH_ENA | CFG_DMA_HSMOOTH | CFG_DMA_ENA;
 
 	/* Does the position/size result in nothing to display? */
-	if (crtc_w == 0 || crtc_h == 0) {
+	if (!visible)
 		ctrl0 &= ~CFG_DMA_ENA;
-	}
-
-	/*
-	 * FIXME: if the starting point is off screen, we need to
-	 * adjust src_x, src_y, src_w, src_h appropriately, and
-	 * according to the scale.
-	 */
 
 	if (!dcrtc->plane) {
 		dcrtc->plane = plane;
@@ -134,15 +140,19 @@
 	/* FIXME: overlay on an interlaced display */
 	/* Just updating the position/size? */
 	if (plane->fb == fb && dplane->ctrl0 == ctrl0) {
-		val = (src_h & 0xffff0000) | src_w >> 16;
+		val = (drm_rect_height(&src) & 0xffff0000) |
+		      drm_rect_width(&src) >> 16;
 		dplane->src_hw = val;
 		writel_relaxed(val, dcrtc->base + LCD_SPU_DMA_HPXL_VLN);
-		val = crtc_h << 16 | crtc_w;
+
+		val = drm_rect_height(&dest) << 16 | drm_rect_width(&dest);
 		dplane->dst_hw = val;
 		writel_relaxed(val, dcrtc->base + LCD_SPU_DZM_HPXL_VLN);
-		val = crtc_y << 16 | crtc_x;
+
+		val = dest.y1 << 16 | dest.x1;
 		dplane->dst_yx = val;
 		writel_relaxed(val, dcrtc->base + LCD_SPU_DMA_OVSA_HPXL_VLN);
+
 		return 0;
 	} else if (~dplane->ctrl0 & ctrl0 & CFG_DMA_ENA) {
 		/* Power up the Y/U/V FIFOs on ENA 0->1 transitions */
@@ -150,15 +160,14 @@
 			       dcrtc->base + LCD_SPU_SRAM_PARA1);
 	}
 
-	ret = wait_event_timeout(dplane->vbl.wait,
-				 list_empty(&dplane->vbl.update.node),
-				 HZ/25);
-	if (ret < 0)
-		return ret;
+	wait_event_timeout(dplane->vbl.wait,
+			   list_empty(&dplane->vbl.update.node),
+			   HZ/25);
 
 	if (plane->fb != fb) {
 		struct armada_gem_object *obj = drm_fb_obj(fb);
-		uint32_t sy, su, sv;
+		uint32_t addr[3], pixel_format;
+		int i, num_planes, hsub;
 
 		/*
 		 * Take a reference on the new framebuffer - we want to
@@ -178,26 +187,39 @@
 							    older_fb);
 		}
 
-		src_y >>= 16;
-		src_x >>= 16;
-		sy = obj->dev_addr + fb->offsets[0] + src_y * fb->pitches[0] +
-			src_x * fb->bits_per_pixel / 8;
-		su = obj->dev_addr + fb->offsets[1] + src_y * fb->pitches[1] +
-			src_x;
-		sv = obj->dev_addr + fb->offsets[2] + src_y * fb->pitches[2] +
-			src_x;
+		src_y = src.y1 >> 16;
+		src_x = src.x1 >> 16;
 
-		armada_reg_queue_set(dplane->vbl.regs, idx, sy,
+		pixel_format = fb->pixel_format;
+		hsub = drm_format_horz_chroma_subsampling(pixel_format);
+		num_planes = drm_format_num_planes(pixel_format);
+
+		/*
+		 * Annoyingly, shifting a YUYV-format image by one pixel
+		 * causes the U/V planes to toggle.  Toggle the UV swap.
+		 * (Unfortunately, this causes momentary colour flickering.)
+		 */
+		if (src_x & (hsub - 1) && num_planes == 1)
+			ctrl0 ^= CFG_DMA_MOD(CFG_SWAPUV);
+
+		for (i = 0; i < num_planes; i++)
+			addr[i] = obj->dev_addr + fb->offsets[i] +
+				  src_y * fb->pitches[i] +
+				  src_x * drm_format_plane_cpp(pixel_format, i);
+		for (; i < ARRAY_SIZE(addr); i++)
+			addr[i] = 0;
+
+		armada_reg_queue_set(dplane->vbl.regs, idx, addr[0],
 				     LCD_SPU_DMA_START_ADDR_Y0);
-		armada_reg_queue_set(dplane->vbl.regs, idx, su,
+		armada_reg_queue_set(dplane->vbl.regs, idx, addr[1],
 				     LCD_SPU_DMA_START_ADDR_U0);
-		armada_reg_queue_set(dplane->vbl.regs, idx, sv,
+		armada_reg_queue_set(dplane->vbl.regs, idx, addr[2],
 				     LCD_SPU_DMA_START_ADDR_V0);
-		armada_reg_queue_set(dplane->vbl.regs, idx, sy,
+		armada_reg_queue_set(dplane->vbl.regs, idx, addr[0],
 				     LCD_SPU_DMA_START_ADDR_Y1);
-		armada_reg_queue_set(dplane->vbl.regs, idx, su,
+		armada_reg_queue_set(dplane->vbl.regs, idx, addr[1],
 				     LCD_SPU_DMA_START_ADDR_U1);
-		armada_reg_queue_set(dplane->vbl.regs, idx, sv,
+		armada_reg_queue_set(dplane->vbl.regs, idx, addr[2],
 				     LCD_SPU_DMA_START_ADDR_V1);
 
 		val = fb->pitches[0] << 16 | fb->pitches[0];
@@ -208,24 +230,27 @@
 				     LCD_SPU_DMA_PITCH_UV);
 	}
 
-	val = (src_h & 0xffff0000) | src_w >> 16;
+	val = (drm_rect_height(&src) & 0xffff0000) | drm_rect_width(&src) >> 16;
 	if (dplane->src_hw != val) {
 		dplane->src_hw = val;
 		armada_reg_queue_set(dplane->vbl.regs, idx, val,
 				     LCD_SPU_DMA_HPXL_VLN);
 	}
-	val = crtc_h << 16 | crtc_w;
+
+	val = drm_rect_height(&dest) << 16 | drm_rect_width(&dest);
 	if (dplane->dst_hw != val) {
 		dplane->dst_hw = val;
 		armada_reg_queue_set(dplane->vbl.regs, idx, val,
 				     LCD_SPU_DZM_HPXL_VLN);
 	}
-	val = crtc_y << 16 | crtc_x;
+
+	val = dest.y1 << 16 | dest.x1;
 	if (dplane->dst_yx != val) {
 		dplane->dst_yx = val;
 		armada_reg_queue_set(dplane->vbl.regs, idx, val,
 				     LCD_SPU_DMA_OVSA_HPXL_VLN);
 	}
+
 	if (dplane->ctrl0 != ctrl0) {
 		dplane->ctrl0 = ctrl0;
 		armada_reg_queue_mod(dplane->vbl.regs, idx, ctrl0,
@@ -279,7 +304,11 @@
 
 static void armada_plane_destroy(struct drm_plane *plane)
 {
-	kfree(plane);
+	struct armada_plane *dplane = drm_to_armada_plane(plane);
+
+	drm_plane_cleanup(plane);
+
+	kfree(dplane);
 }
 
 static int armada_plane_set_property(struct drm_plane *plane,
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index f69b925..5ae5c69 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -355,6 +355,7 @@
 		planes->overlays[i]->base.possible_crtcs = 1 << crtc->id;
 
 	drm_crtc_helper_add(&crtc->base, &lcdc_crtc_helper_funcs);
+	drm_crtc_vblank_reset(&crtc->base);
 
 	dc->crtc = &crtc->base;
 
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 60b0c13..6fad1f9 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -313,6 +313,12 @@
 
 	pm_runtime_enable(dev->dev);
 
+	ret = drm_vblank_init(dev, 1);
+	if (ret < 0) {
+		dev_err(dev->dev, "failed to initialize vblank\n");
+		goto err_periph_clk_disable;
+	}
+
 	ret = atmel_hlcdc_dc_modeset_init(dev);
 	if (ret < 0) {
 		dev_err(dev->dev, "failed to initialize mode setting\n");
@@ -321,12 +327,6 @@
 
 	drm_mode_config_reset(dev);
 
-	ret = drm_vblank_init(dev, 1);
-	if (ret < 0) {
-		dev_err(dev->dev, "failed to initialize vblank\n");
-		goto err_periph_clk_disable;
-	}
-
 	pm_runtime_get_sync(dev->dev);
 	ret = drm_irq_install(dev, dc->hlcdc->irq);
 	pm_runtime_put_sync(dev->dev);
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index b9ba061..fed7483 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2706,8 +2706,11 @@
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return -EINVAL;
 
-	/* For some reason crtc x/y offsets are signed internally. */
-	if (crtc_req->x > INT_MAX || crtc_req->y > INT_MAX)
+	/*
+	 * Universal plane src offsets are only 16.16, prevent havoc for
+	 * drivers using universal plane code internally.
+	 */
+	if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
 		return -ERANGE;
 
 	drm_modeset_lock_all(dev);
@@ -5395,12 +5398,9 @@
 		if (encoder->funcs->reset)
 			encoder->funcs->reset(encoder);
 
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		connector->status = connector_status_unknown;
-
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
 		if (connector->funcs->reset)
 			connector->funcs->reset(connector);
-	}
 }
 EXPORT_SYMBOL(drm_mode_config_reset);
 
diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c
index aa8bbb4..9cfcd0a 100644
--- a/drivers/gpu/drm/drm_ioc32.c
+++ b/drivers/gpu/drm/drm_ioc32.c
@@ -70,6 +70,8 @@
 
 #define DRM_IOCTL_WAIT_VBLANK32		DRM_IOWR(0x3a, drm_wait_vblank32_t)
 
+#define DRM_IOCTL_MODE_ADDFB232		DRM_IOWR(0xb8, drm_mode_fb_cmd232_t)
+
 typedef struct drm_version_32 {
 	int version_major;	  /**< Major version */
 	int version_minor;	  /**< Minor version */
@@ -1016,6 +1018,63 @@
 	return 0;
 }
 
+typedef struct drm_mode_fb_cmd232 {
+	u32 fb_id;
+	u32 width;
+	u32 height;
+	u32 pixel_format;
+	u32 flags;
+	u32 handles[4];
+	u32 pitches[4];
+	u32 offsets[4];
+	u64 modifier[4];
+} __attribute__((packed)) drm_mode_fb_cmd232_t;
+
+static int compat_drm_mode_addfb2(struct file *file, unsigned int cmd,
+				  unsigned long arg)
+{
+	struct drm_mode_fb_cmd232 __user *argp = (void __user *)arg;
+	struct drm_mode_fb_cmd232 req32;
+	struct drm_mode_fb_cmd2 __user *req64;
+	int i;
+	int err;
+
+	if (copy_from_user(&req32, argp, sizeof(req32)))
+		return -EFAULT;
+
+	req64 = compat_alloc_user_space(sizeof(*req64));
+
+	if (!access_ok(VERIFY_WRITE, req64, sizeof(*req64))
+	    || __put_user(req32.width, &req64->width)
+	    || __put_user(req32.height, &req64->height)
+	    || __put_user(req32.pixel_format, &req64->pixel_format)
+	    || __put_user(req32.flags, &req64->flags))
+		return -EFAULT;
+
+	for (i = 0; i < 4; i++) {
+		if (__put_user(req32.handles[i], &req64->handles[i]))
+			return -EFAULT;
+		if (__put_user(req32.pitches[i], &req64->pitches[i]))
+			return -EFAULT;
+		if (__put_user(req32.offsets[i], &req64->offsets[i]))
+			return -EFAULT;
+		if (__put_user(req32.modifier[i], &req64->modifier[i]))
+			return -EFAULT;
+	}
+
+	err = drm_ioctl(file, DRM_IOCTL_MODE_ADDFB2, (unsigned long)req64);
+	if (err)
+		return err;
+
+	if (__get_user(req32.fb_id, &req64->fb_id))
+		return -EFAULT;
+
+	if (copy_to_user(argp, &req32, sizeof(req32)))
+		return -EFAULT;
+
+	return 0;
+}
+
 static drm_ioctl_compat_t *drm_compat_ioctls[] = {
 	[DRM_IOCTL_NR(DRM_IOCTL_VERSION32)] = compat_drm_version,
 	[DRM_IOCTL_NR(DRM_IOCTL_GET_UNIQUE32)] = compat_drm_getunique,
@@ -1048,6 +1107,7 @@
 	[DRM_IOCTL_NR(DRM_IOCTL_UPDATE_DRAW32)] = compat_drm_update_draw,
 #endif
 	[DRM_IOCTL_NR(DRM_IOCTL_WAIT_VBLANK32)] = compat_drm_wait_vblank,
+	[DRM_IOCTL_NR(DRM_IOCTL_MODE_ADDFB232)] = compat_drm_mode_addfb2,
 };
 
 /**
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 542fac6..5f27290 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -826,6 +826,7 @@
 	struct kref ref;
 	int user_handle;
 	uint8_t remap_slice;
+	struct drm_i915_private *i915;
 	struct drm_i915_file_private *file_priv;
 	struct i915_ctx_hang_stats hang_stats;
 	struct i915_hw_ppgtt *ppgtt;
@@ -2036,8 +2037,6 @@
 	unsigned int cache_level:3;
 	unsigned int cache_dirty:1;
 
-	unsigned int has_dma_mapping:1;
-
 	unsigned int frontbuffer_bits:INTEL_FRONTBUFFER_BITS;
 
 	unsigned int pin_display;
@@ -3116,7 +3115,8 @@
 int i915_debugfs_connector_add(struct drm_connector *connector);
 void intel_display_crc_init(struct drm_device *dev);
 #else
-static inline int i915_debugfs_connector_add(struct drm_connector *connector) {}
+static inline int i915_debugfs_connector_add(struct drm_connector *connector)
+{ return 0; }
 static inline void intel_display_crc_init(struct drm_device *dev) {}
 #endif
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 248fd1a..52b446b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -213,7 +213,6 @@
 	sg_dma_len(sg) = obj->base.size;
 
 	obj->pages = st;
-	obj->has_dma_mapping = true;
 	return 0;
 }
 
@@ -265,8 +264,6 @@
 
 	sg_free_table(obj->pages);
 	kfree(obj->pages);
-
-	obj->has_dma_mapping = false;
 }
 
 static void
@@ -2139,6 +2136,8 @@
 		obj->base.read_domains = obj->base.write_domain = I915_GEM_DOMAIN_CPU;
 	}
 
+	i915_gem_gtt_finish_object(obj);
+
 	if (i915_gem_object_needs_bit17_swizzle(obj))
 		i915_gem_object_save_bit_17_swizzle(obj);
 
@@ -2199,6 +2198,7 @@
 	struct sg_page_iter sg_iter;
 	struct page *page;
 	unsigned long last_pfn = 0;	/* suppress gcc warning */
+	int ret;
 	gfp_t gfp;
 
 	/* Assert that the object is not currently in any GPU domain. As it
@@ -2246,8 +2246,10 @@
 			 */
 			i915_gem_shrink_all(dev_priv);
 			page = shmem_read_mapping_page(mapping, i);
-			if (IS_ERR(page))
+			if (IS_ERR(page)) {
+				ret = PTR_ERR(page);
 				goto err_pages;
+			}
 		}
 #ifdef CONFIG_SWIOTLB
 		if (swiotlb_nr_tbl()) {
@@ -2276,6 +2278,10 @@
 		sg_mark_end(sg);
 	obj->pages = st;
 
+	ret = i915_gem_gtt_prepare_object(obj);
+	if (ret)
+		goto err_pages;
+
 	if (i915_gem_object_needs_bit17_swizzle(obj))
 		i915_gem_object_do_bit_17_swizzle(obj);
 
@@ -2300,10 +2306,10 @@
 	 * space and so want to translate the error from shmemfs back to our
 	 * usual understanding of ENOMEM.
 	 */
-	if (PTR_ERR(page) == -ENOSPC)
-		return -ENOMEM;
-	else
-		return PTR_ERR(page);
+	if (ret == -ENOSPC)
+		ret = -ENOMEM;
+
+	return ret;
 }
 
 /* Ensure that the associated pages are gathered from the backing storage
@@ -2542,6 +2548,7 @@
 	}
 
 	request->emitted_jiffies = jiffies;
+	ring->last_submitted_seqno = request->seqno;
 	list_add_tail(&request->list, &ring->request_list);
 	request->file_priv = NULL;
 
@@ -3247,10 +3254,8 @@
 
 	/* Since the unbound list is global, only move to that list if
 	 * no more VMAs exist. */
-	if (list_empty(&obj->vma_list)) {
-		i915_gem_gtt_finish_object(obj);
+	if (list_empty(&obj->vma_list))
 		list_move_tail(&obj->global_list, &dev_priv->mm.unbound_list);
-	}
 
 	/* And finally now the object is completely decoupled from this vma,
 	 * we can drop its hold on the backing storage and allow it to be
@@ -3768,22 +3773,16 @@
 		goto err_remove_node;
 	}
 
-	ret = i915_gem_gtt_prepare_object(obj);
-	if (ret)
-		goto err_remove_node;
-
 	trace_i915_vma_bind(vma, flags);
 	ret = i915_vma_bind(vma, obj->cache_level, flags);
 	if (ret)
-		goto err_finish_gtt;
+		goto err_remove_node;
 
 	list_move_tail(&obj->global_list, &dev_priv->mm.bound_list);
 	list_add_tail(&vma->mm_list, &vm->inactive_list);
 
 	return vma;
 
-err_finish_gtt:
-	i915_gem_gtt_finish_object(obj);
 err_remove_node:
 	drm_mm_remove_node(&vma->node);
 err_free_vma:
diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
index d65cbe6..48afa77 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/i915_gem_context.c
@@ -135,8 +135,7 @@
 
 void i915_gem_context_free(struct kref *ctx_ref)
 {
-	struct intel_context *ctx = container_of(ctx_ref,
-						 typeof(*ctx), ref);
+	struct intel_context *ctx = container_of(ctx_ref, typeof(*ctx), ref);
 
 	trace_i915_context_free(ctx);
 
@@ -195,6 +194,7 @@
 
 	kref_init(&ctx->ref);
 	list_add_tail(&ctx->link, &dev_priv->context_list);
+	ctx->i915 = dev_priv;
 
 	if (dev_priv->hw_context_size) {
 		struct drm_i915_gem_object *obj =
diff --git a/drivers/gpu/drm/i915/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
index 7998da2..e9c2bfd 100644
--- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c
+++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
@@ -256,7 +256,6 @@
 		return PTR_ERR(sg);
 
 	obj->pages = sg;
-	obj->has_dma_mapping = true;
 	return 0;
 }
 
@@ -264,7 +263,6 @@
 {
 	dma_buf_unmap_attachment(obj->base.import_attach,
 				 obj->pages, DMA_BIDIRECTIONAL);
-	obj->has_dma_mapping = false;
 }
 
 static const struct drm_i915_gem_object_ops i915_gem_object_dmabuf_ops = {
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index dcc6a88..56b52a4 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -1723,9 +1723,6 @@
 
 int i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj)
 {
-	if (obj->has_dma_mapping)
-		return 0;
-
 	if (!dma_map_sg(&obj->base.dev->pdev->dev,
 			obj->pages->sgl, obj->pages->nents,
 			PCI_DMA_BIDIRECTIONAL))
@@ -1972,10 +1969,8 @@
 
 	interruptible = do_idling(dev_priv);
 
-	if (!obj->has_dma_mapping)
-		dma_unmap_sg(&dev->pdev->dev,
-			     obj->pages->sgl, obj->pages->nents,
-			     PCI_DMA_BIDIRECTIONAL);
+	dma_unmap_sg(&dev->pdev->dev, obj->pages->sgl, obj->pages->nents,
+		     PCI_DMA_BIDIRECTIONAL);
 
 	undo_idling(dev_priv, interruptible);
 }
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index 348ed5a..8b5b784 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -416,7 +416,6 @@
 	if (obj->pages == NULL)
 		goto cleanup;
 
-	obj->has_dma_mapping = true;
 	i915_gem_object_pin_pages(obj);
 	obj->stolen = stolen;
 
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index d61e74a..633bd1f 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -183,18 +183,8 @@
 		if (IS_GEN4(dev)) {
 			uint32_t ddc2 = I915_READ(DCC2);
 
-			if (!(ddc2 & DCC2_MODIFIED_ENHANCED_DISABLE)) {
-				/* Since the swizzling may vary within an
-				 * object, we have no idea what the swizzling
-				 * is for any page in particular. Thus we
-				 * cannot migrate tiled pages using the GPU,
-				 * nor can we tell userspace what the exact
-				 * swizzling is for any object.
-				 */
+			if (!(ddc2 & DCC2_MODIFIED_ENHANCED_DISABLE))
 				dev_priv->quirks |= QUIRK_PIN_SWIZZLED_PAGES;
-				swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
-				swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
-			}
 		}
 
 		if (dcc == 0xffffffff) {
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index 1f4e5a3..8fd431b 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -545,6 +545,26 @@
 	return ret;
 }
 
+static int
+__i915_gem_userptr_set_pages(struct drm_i915_gem_object *obj,
+			     struct page **pvec, int num_pages)
+{
+	int ret;
+
+	ret = st_set_pages(&obj->pages, pvec, num_pages);
+	if (ret)
+		return ret;
+
+	ret = i915_gem_gtt_prepare_object(obj);
+	if (ret) {
+		sg_free_table(obj->pages);
+		kfree(obj->pages);
+		obj->pages = NULL;
+	}
+
+	return ret;
+}
+
 static void
 __i915_gem_userptr_get_pages_worker(struct work_struct *_work)
 {
@@ -584,9 +604,12 @@
 	if (obj->userptr.work != &work->work) {
 		ret = 0;
 	} else if (pinned == num_pages) {
-		ret = st_set_pages(&obj->pages, pvec, num_pages);
+		ret = __i915_gem_userptr_set_pages(obj, pvec, num_pages);
 		if (ret == 0) {
 			list_add_tail(&obj->global_list, &to_i915(dev)->mm.unbound_list);
+			obj->get_page.sg = obj->pages->sgl;
+			obj->get_page.last = 0;
+
 			pinned = 0;
 		}
 	}
@@ -693,7 +716,7 @@
 			}
 		}
 	} else {
-		ret = st_set_pages(&obj->pages, pvec, num_pages);
+		ret = __i915_gem_userptr_set_pages(obj, pvec, num_pages);
 		if (ret == 0) {
 			obj->userptr.work = NULL;
 			pinned = 0;
@@ -715,6 +738,8 @@
 	if (obj->madv != I915_MADV_WILLNEED)
 		obj->dirty = 0;
 
+	i915_gem_gtt_finish_object(obj);
+
 	for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) {
 		struct page *page = sg_page_iter_page(&sg_iter);
 
diff --git a/drivers/gpu/drm/i915/i915_ioc32.c b/drivers/gpu/drm/i915/i915_ioc32.c
index 176de63..23aa04c 100644
--- a/drivers/gpu/drm/i915/i915_ioc32.c
+++ b/drivers/gpu/drm/i915/i915_ioc32.c
@@ -204,7 +204,7 @@
 	drm_ioctl_compat_t *fn = NULL;
 	int ret;
 
-	if (nr < DRM_COMMAND_BASE)
+	if (nr < DRM_COMMAND_BASE || nr >= DRM_COMMAND_END)
 		return drm_compat_ioctl(filp, cmd, arg);
 
 	if (nr < DRM_COMMAND_BASE + ARRAY_SIZE(i915_compat_ioctls))
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index e6bb72d..984e2fe 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2706,18 +2706,11 @@
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 }
 
-static struct drm_i915_gem_request *
-ring_last_request(struct intel_engine_cs *ring)
-{
-	return list_entry(ring->request_list.prev,
-			  struct drm_i915_gem_request, list);
-}
-
 static bool
-ring_idle(struct intel_engine_cs *ring)
+ring_idle(struct intel_engine_cs *ring, u32 seqno)
 {
 	return (list_empty(&ring->request_list) ||
-		i915_gem_request_completed(ring_last_request(ring), false));
+		i915_seqno_passed(seqno, ring->last_submitted_seqno));
 }
 
 static bool
@@ -2939,7 +2932,7 @@
 		acthd = intel_ring_get_active_head(ring);
 
 		if (ring->hangcheck.seqno == seqno) {
-			if (ring_idle(ring)) {
+			if (ring_idle(ring, seqno)) {
 				ring->hangcheck.action = HANGCHECK_IDLE;
 
 				if (waitqueue_active(&ring->irq_queue)) {
diff --git a/drivers/gpu/drm/i915/i915_trace.h b/drivers/gpu/drm/i915/i915_trace.h
index 497cba5..849a259 100644
--- a/drivers/gpu/drm/i915/i915_trace.h
+++ b/drivers/gpu/drm/i915/i915_trace.h
@@ -727,7 +727,7 @@
 	TP_fast_assign(
 			__entry->ctx = ctx;
 			__entry->vm = ctx->ppgtt ? &ctx->ppgtt->base : NULL;
-			__entry->dev = ctx->file_priv->dev_priv->dev->primary->index;
+			__entry->dev = ctx->i915->dev->primary->index;
 	),
 
 	TP_printk("dev=%u, ctx=%p, ctx_vm=%p",
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 647b140..30e0f54 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6315,9 +6315,6 @@
 	struct drm_connector *connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	/* crtc should still be enabled when we disable it. */
-	WARN_ON(!crtc->state->enable);
-
 	intel_crtc_disable_planes(crtc);
 	dev_priv->display.crtc_disable(crtc);
 	dev_priv->display.off(crtc);
@@ -12591,7 +12588,8 @@
 			continue;
 
 		if (!crtc_state->enable) {
-			intel_crtc_disable(crtc);
+			if (crtc->state->enable)
+				intel_crtc_disable(crtc);
 		} else if (crtc->state->enable) {
 			intel_crtc_disable_planes(crtc);
 			dev_priv->display.crtc_disable(crtc);
@@ -13276,7 +13274,7 @@
 	if (ret)
 		return ret;
 
-	if (intel_crtc->active) {
+	if (crtc_state ? crtc_state->base.active : intel_crtc->active) {
 		struct intel_plane_state *old_state =
 			to_intel_plane_state(plane->state);
 
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index e539314..4be66f6 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -275,6 +275,13 @@
 	 * Do we have some not yet emitted requests outstanding?
 	 */
 	struct drm_i915_gem_request *outstanding_lazy_request;
+	/**
+	 * Seqno of request most recently submitted to request_list.
+	 * Used exclusively by hang checker to avoid grabbing lock while
+	 * inspecting request list.
+	 */
+	u32 last_submitted_seqno;
+
 	bool gpu_caches_dirty;
 
 	wait_queue_head_t irq_queue;
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index a6d8a3e..260389a 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -1274,10 +1274,12 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_reg_read *reg = data;
 	struct register_whitelist const *entry = whitelist;
+	unsigned size;
+	u64 offset;
 	int i, ret = 0;
 
 	for (i = 0; i < ARRAY_SIZE(whitelist); i++, entry++) {
-		if (entry->offset == reg->offset &&
+		if (entry->offset == (reg->offset & -entry->size) &&
 		    (1 << INTEL_INFO(dev)->gen & entry->gen_bitmask))
 			break;
 	}
@@ -1285,23 +1287,33 @@
 	if (i == ARRAY_SIZE(whitelist))
 		return -EINVAL;
 
+	/* We use the low bits to encode extra flags as the register should
+	 * be naturally aligned (and those that are not so aligned merely
+	 * limit the available flags for that register).
+	 */
+	offset = entry->offset;
+	size = entry->size;
+	size |= reg->offset ^ offset;
+
 	intel_runtime_pm_get(dev_priv);
 
-	switch (entry->size) {
+	switch (size) {
+	case 8 | 1:
+		reg->val = I915_READ64_2x32(offset, offset+4);
+		break;
 	case 8:
-		reg->val = I915_READ64(reg->offset);
+		reg->val = I915_READ64(offset);
 		break;
 	case 4:
-		reg->val = I915_READ(reg->offset);
+		reg->val = I915_READ(offset);
 		break;
 	case 2:
-		reg->val = I915_READ16(reg->offset);
+		reg->val = I915_READ16(offset);
 		break;
 	case 1:
-		reg->val = I915_READ8(reg->offset);
+		reg->val = I915_READ8(offset);
 		break;
 	default:
-		MISSING_CASE(entry->size);
 		ret = -EINVAL;
 		goto out;
 	}
diff --git a/drivers/gpu/drm/imx/imx-tve.c b/drivers/gpu/drm/imx/imx-tve.c
index 214ecee..e671ad3 100644
--- a/drivers/gpu/drm/imx/imx-tve.c
+++ b/drivers/gpu/drm/imx/imx-tve.c
@@ -301,7 +301,7 @@
 
 	switch (tve->mode) {
 	case TVE_MODE_VGA:
-		imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_YUV8_1X24,
+		imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_GBR888_1X24,
 					    tve->hsync_pin, tve->vsync_pin);
 		break;
 	case TVE_MODE_TVOUT:
diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
index 74a9ce4..b4deb9c 100644
--- a/drivers/gpu/drm/imx/parallel-display.c
+++ b/drivers/gpu/drm/imx/parallel-display.c
@@ -21,6 +21,7 @@
 #include <drm/drm_panel.h>
 #include <linux/videodev2.h>
 #include <video/of_display_timing.h>
+#include <linux/of_graph.h>
 
 #include "imx-drm.h"
 
@@ -208,7 +209,7 @@
 {
 	struct drm_device *drm = data;
 	struct device_node *np = dev->of_node;
-	struct device_node *panel_node;
+	struct device_node *port;
 	const u8 *edidp;
 	struct imx_parallel_display *imxpd;
 	int ret;
@@ -234,11 +235,19 @@
 			imxpd->bus_format = MEDIA_BUS_FMT_RGB666_1X24_CPADHI;
 	}
 
-	panel_node = of_parse_phandle(np, "fsl,panel", 0);
-	if (panel_node) {
-		imxpd->panel = of_drm_find_panel(panel_node);
-		if (!imxpd->panel)
-			return -EPROBE_DEFER;
+	/* port@1 is the output port */
+	port = of_graph_get_port_by_id(np, 1);
+	if (port) {
+		struct device_node *endpoint, *remote;
+
+		endpoint = of_get_child_by_name(port, "endpoint");
+		if (endpoint) {
+			remote = of_graph_get_remote_port_parent(endpoint);
+			if (remote)
+				imxpd->panel = of_drm_find_panel(remote);
+			if (!imxpd->panel)
+				return -EPROBE_DEFER;
+		}
 	}
 
 	imxpd->dev = dev;
diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c
index 8730562..4a09947 100644
--- a/drivers/gpu/drm/radeon/ci_dpm.c
+++ b/drivers/gpu/drm/radeon/ci_dpm.c
@@ -5818,7 +5818,7 @@
 			tmp |= DPM_ENABLED;
 			break;
 		default:
-			DRM_ERROR("Invalid PCC GPIO: %u!\n", gpio.shift);
+			DRM_DEBUG("Invalid PCC GPIO: %u!\n", gpio.shift);
 			break;
 		}
 		WREG32_SMC(CNB_PWRMGT_CNTL, tmp);
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index 5450fa9..c4777c8 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -260,8 +260,10 @@
 			}
 		}
 	}
-	mb();
-	radeon_gart_tlb_flush(rdev);
+	if (rdev->gart.ptr) {
+		mb();
+		radeon_gart_tlb_flush(rdev);
+	}
 }
 
 /**
@@ -306,8 +308,10 @@
 			page_base += RADEON_GPU_PAGE_SIZE;
 		}
 	}
-	mb();
-	radeon_gart_tlb_flush(rdev);
+	if (rdev->gart.ptr) {
+		mb();
+		radeon_gart_tlb_flush(rdev);
+	}
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index 013ec71..3dcc573 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -36,6 +36,7 @@
 	if (robj) {
 		if (robj->gem_base.import_attach)
 			drm_prime_gem_destroy(&robj->gem_base, robj->tbo.sg);
+		radeon_mn_unregister(robj);
 		radeon_bo_unref(&robj);
 	}
 }
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 318165d..6763627 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -75,7 +75,6 @@
 	bo = container_of(tbo, struct radeon_bo, tbo);
 
 	radeon_update_memory_usage(bo, bo->tbo.mem.mem_type, -1);
-	radeon_mn_unregister(bo);
 
 	mutex_lock(&bo->rdev->gem.mutex);
 	list_del_init(&bo->list);
diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index 1dbdf32..787cd8f 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -2926,6 +2926,7 @@
 	/* PITCAIRN - https://bugs.freedesktop.org/show_bug.cgi?id=76490 */
 	{ PCI_VENDOR_ID_ATI, 0x6810, 0x1462, 0x3036, 0, 120000 },
 	{ PCI_VENDOR_ID_ATI, 0x6811, 0x174b, 0xe271, 0, 120000 },
+	{ PCI_VENDOR_ID_ATI, 0x6810, 0x174b, 0xe271, 85000, 90000 },
 	{ 0, 0, 0, 0 },
 };
 
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 01b558f..9a0c291 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -555,7 +555,6 @@
 	.probe = rockchip_drm_platform_probe,
 	.remove = rockchip_drm_platform_remove,
 	.driver = {
-		.owner = THIS_MODULE,
 		.name = "rockchip-drm",
 		.of_match_table = rockchip_drm_dt_ids,
 		.pm = &rockchip_drm_pm_ops,
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
index 77d5289..002645b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
@@ -162,7 +162,8 @@
 	struct rockchip_drm_private *private = dev->dev_private;
 	struct drm_fb_helper *fb_helper = &private->fbdev_helper;
 
-	drm_fb_helper_hotplug_event(fb_helper);
+	if (fb_helper)
+		drm_fb_helper_hotplug_event(fb_helper);
 }
 
 static const struct drm_mode_config_funcs rockchip_drm_mode_config_funcs = {
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
index eb2282c..eba5f8a 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
@@ -54,55 +54,56 @@
 		       &rk_obj->dma_attrs);
 }
 
+static int rockchip_drm_gem_object_mmap(struct drm_gem_object *obj,
+					struct vm_area_struct *vma)
+
+{
+	int ret;
+	struct rockchip_gem_object *rk_obj = to_rockchip_obj(obj);
+	struct drm_device *drm = obj->dev;
+
+	/*
+	 * dma_alloc_attrs() allocated a struct page table for rk_obj, so clear
+	 * VM_PFNMAP flag that was set by drm_gem_mmap_obj()/drm_gem_mmap().
+	 */
+	vma->vm_flags &= ~VM_PFNMAP;
+
+	ret = dma_mmap_attrs(drm->dev, vma, rk_obj->kvaddr, rk_obj->dma_addr,
+			     obj->size, &rk_obj->dma_attrs);
+	if (ret)
+		drm_gem_vm_close(vma);
+
+	return ret;
+}
+
 int rockchip_gem_mmap_buf(struct drm_gem_object *obj,
 			  struct vm_area_struct *vma)
 {
-	struct rockchip_gem_object *rk_obj = to_rockchip_obj(obj);
 	struct drm_device *drm = obj->dev;
-	unsigned long vm_size;
+	int ret;
 
-	vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP;
-	vm_size = vma->vm_end - vma->vm_start;
+	mutex_lock(&drm->struct_mutex);
+	ret = drm_gem_mmap_obj(obj, obj->size, vma);
+	mutex_unlock(&drm->struct_mutex);
+	if (ret)
+		return ret;
 
-	if (vm_size > obj->size)
-		return -EINVAL;
-
-	return dma_mmap_attrs(drm->dev, vma, rk_obj->kvaddr, rk_obj->dma_addr,
-			     obj->size, &rk_obj->dma_attrs);
+	return rockchip_drm_gem_object_mmap(obj, vma);
 }
 
 /* drm driver mmap file operations */
 int rockchip_gem_mmap(struct file *filp, struct vm_area_struct *vma)
 {
-	struct drm_file *priv = filp->private_data;
-	struct drm_device *dev = priv->minor->dev;
 	struct drm_gem_object *obj;
-	struct drm_vma_offset_node *node;
 	int ret;
 
-	if (drm_device_is_unplugged(dev))
-		return -ENODEV;
+	ret = drm_gem_mmap(filp, vma);
+	if (ret)
+		return ret;
 
-	mutex_lock(&dev->struct_mutex);
+	obj = vma->vm_private_data;
 
-	node = drm_vma_offset_exact_lookup(dev->vma_offset_manager,
-					   vma->vm_pgoff,
-					   vma_pages(vma));
-	if (!node) {
-		mutex_unlock(&dev->struct_mutex);
-		DRM_ERROR("failed to find vma node.\n");
-		return -EINVAL;
-	} else if (!drm_vma_node_is_allowed(node, filp)) {
-		mutex_unlock(&dev->struct_mutex);
-		return -EACCES;
-	}
-
-	obj = container_of(node, struct drm_gem_object, vma_node);
-	ret = rockchip_gem_mmap_buf(obj, vma);
-
-	mutex_unlock(&dev->struct_mutex);
-
-	return ret;
+	return rockchip_drm_gem_object_mmap(obj, vma);
 }
 
 struct rockchip_gem_object *
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index dc65161..34b78e7 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -170,6 +170,7 @@
 
 	struct vop_reg enable;
 	struct vop_reg format;
+	struct vop_reg rb_swap;
 	struct vop_reg act_info;
 	struct vop_reg dsp_info;
 	struct vop_reg dsp_st;
@@ -199,8 +200,12 @@
 static const uint32_t formats_01[] = {
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
 	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
 	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
 	DRM_FORMAT_NV12,
 	DRM_FORMAT_NV16,
 	DRM_FORMAT_NV24,
@@ -209,8 +214,12 @@
 static const uint32_t formats_234[] = {
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ABGR8888,
 	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGR888,
 	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR565,
 };
 
 static const struct vop_win_phy win01_data = {
@@ -218,6 +227,7 @@
 	.nformats = ARRAY_SIZE(formats_01),
 	.enable = VOP_REG(WIN0_CTRL0, 0x1, 0),
 	.format = VOP_REG(WIN0_CTRL0, 0x7, 1),
+	.rb_swap = VOP_REG(WIN0_CTRL0, 0x1, 12),
 	.act_info = VOP_REG(WIN0_ACT_INFO, 0x1fff1fff, 0),
 	.dsp_info = VOP_REG(WIN0_DSP_INFO, 0x0fff0fff, 0),
 	.dsp_st = VOP_REG(WIN0_DSP_ST, 0x1fff1fff, 0),
@@ -234,6 +244,7 @@
 	.nformats = ARRAY_SIZE(formats_234),
 	.enable = VOP_REG(WIN2_CTRL0, 0x1, 0),
 	.format = VOP_REG(WIN2_CTRL0, 0x7, 1),
+	.rb_swap = VOP_REG(WIN2_CTRL0, 0x1, 12),
 	.dsp_info = VOP_REG(WIN2_DSP_INFO0, 0x0fff0fff, 0),
 	.dsp_st = VOP_REG(WIN2_DSP_ST0, 0x1fff1fff, 0),
 	.yrgb_mst = VOP_REG(WIN2_MST0, 0xffffffff, 0),
@@ -242,15 +253,6 @@
 	.dst_alpha_ctl = VOP_REG(WIN2_DST_ALPHA_CTRL, 0xff, 0),
 };
 
-static const struct vop_win_phy cursor_data = {
-	.data_formats = formats_234,
-	.nformats = ARRAY_SIZE(formats_234),
-	.enable = VOP_REG(HWC_CTRL0, 0x1, 0),
-	.format = VOP_REG(HWC_CTRL0, 0x7, 1),
-	.dsp_st = VOP_REG(HWC_DSP_ST, 0x1fff1fff, 0),
-	.yrgb_mst = VOP_REG(HWC_MST, 0xffffffff, 0),
-};
-
 static const struct vop_ctrl ctrl_data = {
 	.standby = VOP_REG(SYS_CTRL, 0x1, 22),
 	.gate_en = VOP_REG(SYS_CTRL, 0x1, 23),
@@ -282,14 +284,14 @@
 /*
  * Note: rk3288 has a dedicated 'cursor' window, however, that window requires
  * special support to get alpha blending working.  For now, just use overlay
- * window 1 for the drm cursor.
+ * window 3 for the drm cursor.
+ *
  */
 static const struct vop_win_data rk3288_vop_win_data[] = {
 	{ .base = 0x00, .phy = &win01_data, .type = DRM_PLANE_TYPE_PRIMARY },
-	{ .base = 0x40, .phy = &win01_data, .type = DRM_PLANE_TYPE_CURSOR },
+	{ .base = 0x40, .phy = &win01_data, .type = DRM_PLANE_TYPE_OVERLAY },
 	{ .base = 0x00, .phy = &win23_data, .type = DRM_PLANE_TYPE_OVERLAY },
-	{ .base = 0x50, .phy = &win23_data, .type = DRM_PLANE_TYPE_OVERLAY },
-	{ .base = 0x00, .phy = &cursor_data, .type = DRM_PLANE_TYPE_OVERLAY },
+	{ .base = 0x50, .phy = &win23_data, .type = DRM_PLANE_TYPE_CURSOR },
 };
 
 static const struct vop_data rk3288_vop = {
@@ -352,15 +354,32 @@
 	}
 }
 
+static bool has_rb_swapped(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_BGR888:
+	case DRM_FORMAT_BGR565:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static enum vop_data_format vop_convert_format(uint32_t format)
 {
 	switch (format) {
 	case DRM_FORMAT_XRGB8888:
 	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ABGR8888:
 		return VOP_FMT_ARGB8888;
 	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
 		return VOP_FMT_RGB888;
 	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
 		return VOP_FMT_RGB565;
 	case DRM_FORMAT_NV12:
 		return VOP_FMT_YUV420SP;
@@ -378,6 +397,7 @@
 {
 	switch (format) {
 	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_ABGR8888:
 		return true;
 	default:
 		return false;
@@ -588,6 +608,7 @@
 	enum vop_data_format format;
 	uint32_t val;
 	bool is_alpha;
+	bool rb_swap;
 	bool visible;
 	int ret;
 	struct drm_rect dest = {
@@ -621,6 +642,7 @@
 		return 0;
 
 	is_alpha = is_alpha_support(fb->pixel_format);
+	rb_swap = has_rb_swapped(fb->pixel_format);
 	format = vop_convert_format(fb->pixel_format);
 	if (format < 0)
 		return format;
@@ -689,6 +711,7 @@
 	val = (dsp_sty - 1) << 16;
 	val |= (dsp_stx - 1) & 0xffff;
 	VOP_WIN_SET(vop, win, dsp_st, val);
+	VOP_WIN_SET(vop, win, rb_swap, rb_swap);
 
 	if (is_alpha) {
 		VOP_WIN_SET(vop, win, dst_alpha_ctl,
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 882cccd..ac6fe40 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -490,7 +490,8 @@
 	else if (boot_cpu_data.x86 > 3)
 		tmp = pgprot_noncached(tmp);
 #endif
-#if defined(__ia64__) || defined(__arm__) || defined(__powerpc__)
+#if defined(__ia64__) || defined(__arm__) || defined(__aarch64__) || \
+    defined(__powerpc__)
 	if (caching_flags & TTM_PL_FLAG_WC)
 		tmp = pgprot_writecombine(tmp);
 	else
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c b/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c
index 3077f15..624d941 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c
@@ -963,14 +963,13 @@
 	} else {
 		pool->npages_free += count;
 		list_splice(&ttm_dma->pages_list, &pool->free_list);
-		npages = count;
-		if (pool->npages_free > _manager->options.max_size) {
+		/*
+		 * Wait to have at at least NUM_PAGES_TO_ALLOC number of pages
+		 * to free in order to minimize calls to set_memory_wb().
+		 */
+		if (pool->npages_free >= (_manager->options.max_size +
+					  NUM_PAGES_TO_ALLOC))
 			npages = pool->npages_free - _manager->options.max_size;
-			/* free at least NUM_PAGES_TO_ALLOC number of pages
-			 * to reduce calls to set_memory_wb */
-			if (npages < NUM_PAGES_TO_ALLOC)
-				npages = NUM_PAGES_TO_ALLOC;
-		}
 	}
 	spin_unlock_irqrestore(&pool->lock, irq_flags);
 
diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 6d2f39d..00f2058 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -1107,6 +1107,9 @@
 		return ret;
 	}
 
+	for (i = 0; i < IPU_NUM_IRQS; i += 32)
+		ipu_cm_write(ipu, 0, IPU_INT_CTRL(i / 32));
+
 	for (i = 0; i < IPU_NUM_IRQS; i += 32) {
 		gc = irq_get_domain_generic_chip(ipu->domain, i);
 		gc->reg_base = ipu->cm_reg;
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index f822fd2..884d82f 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -546,6 +546,12 @@
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
 		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_ANSI),
+		.driver_data = APPLE_HAS_FN },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_ISO),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_JIS),
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 157c627..e6fce23 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1782,6 +1782,9 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_JIS) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@@ -2463,6 +2466,9 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING9_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ }
diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index 3318de6..a2dbbbe 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -356,6 +356,8 @@
 	struct cp2112_force_read_report report;
 	int ret;
 
+	if (size > sizeof(dev->read_data))
+		size = sizeof(dev->read_data);
 	report.report = CP2112_DATA_READ_FORCE_SEND;
 	report.length = cpu_to_be16(size);
 
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b04b082..b3b225b 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -142,6 +142,9 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0290
 #define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0291
 #define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0292
+#define USB_DEVICE_ID_APPLE_WELLSPRING9_ANSI	0x0272
+#define USB_DEVICE_ID_APPLE_WELLSPRING9_ISO		0x0273
+#define USB_DEVICE_ID_APPLE_WELLSPRING9_JIS		0x0274
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
 #define USB_DEVICE_ID_APPLE_IRCONTROL	0x8240
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 6a9b05b..7c81125 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -778,9 +778,16 @@
 	/*
 	 * some egalax touchscreens have "application == HID_DG_TOUCHSCREEN"
 	 * for the stylus.
+	 * The check for mt_report_id ensures we don't process
+	 * HID_DG_CONTACTCOUNT from the pen report as it is outside the physical
+	 * collection, but within the report ID.
 	 */
 	if (field->physical == HID_DG_STYLUS)
 		return 0;
+	else if ((field->physical == 0) &&
+		 (field->report->id != td->mt_report_id) &&
+		 (td->mt_report_id != -1))
+		return 0;
 
 	if (field->application == HID_DG_TOUCHSCREEN ||
 	    field->application == HID_DG_TOUCHPAD)
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 53e7de7..20f9a65 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -87,6 +87,9 @@
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C05A, HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C06A, HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE_PRO_2, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3_JP, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER, HID_QUIRK_NO_INIT_REPORTS },
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 4c0ffca..44958d7 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -1271,11 +1271,13 @@
 	pad_input_dev = NULL;
 	wacom_wac->pad_registered = false;
 fail_register_pad_input:
-	input_unregister_device(touch_input_dev);
+	if (touch_input_dev)
+		input_unregister_device(touch_input_dev);
 	wacom_wac->touch_input = NULL;
 	wacom_wac->touch_registered = false;
 fail_register_touch_input:
-	input_unregister_device(pen_input_dev);
+	if (pen_input_dev)
+		input_unregister_device(pen_input_dev);
 	wacom_wac->pen_input = NULL;
 	wacom_wac->pen_registered = false;
 fail_register_pen_input:
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 232da89..0d24423 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2213,6 +2213,9 @@
 			features->x_max = 4096;
 			features->y_max = 4096;
 		}
+		else if (features->pktlen == WACOM_PKGLEN_BBTOUCH) {
+			features->device_type |= WACOM_DEVICETYPE_PAD;
+		}
 	}
 
 	/*
diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
index 28fcb2e..fbfc02b 100644
--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -195,7 +195,7 @@
 }
 
 static int nct7802_write_voltage(struct nct7802_data *data, int nr, int index,
-				 unsigned int voltage)
+				 unsigned long voltage)
 {
 	int shift = 8 - REG_VOLTAGE_LIMIT_MSB_SHIFT[index - 1][nr];
 	int err;
diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
index b77b82f..6153df73 100644
--- a/drivers/hwmon/nct7904.c
+++ b/drivers/hwmon/nct7904.c
@@ -412,8 +412,9 @@
 	return sprintf(buf, "%d\n", val);
 }
 
-static ssize_t store_mode(struct device *dev, struct device_attribute *devattr,
-			  const char *buf, size_t count)
+static ssize_t store_enable(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf, size_t count)
 {
 	int index = to_sensor_dev_attr(devattr)->index;
 	struct nct7904_data *data = dev_get_drvdata(dev);
@@ -422,18 +423,18 @@
 
 	if (kstrtoul(buf, 10, &val) < 0)
 		return -EINVAL;
-	if (val > 1 || (val && !data->fan_mode[index]))
+	if (val < 1 || val > 2 || (val == 2 && !data->fan_mode[index]))
 		return -EINVAL;
 
 	ret = nct7904_write_reg(data, BANK_3, FANCTL1_FMR_REG + index,
-				val ? data->fan_mode[index] : 0);
+				val == 2 ? data->fan_mode[index] : 0);
 
 	return ret ? ret : count;
 }
 
-/* Return 0 for manual mode or 1 for SmartFan mode */
-static ssize_t show_mode(struct device *dev,
-			 struct device_attribute *devattr, char *buf)
+/* Return 1 for manual mode or 2 for SmartFan mode */
+static ssize_t show_enable(struct device *dev,
+			   struct device_attribute *devattr, char *buf)
 {
 	int index = to_sensor_dev_attr(devattr)->index;
 	struct nct7904_data *data = dev_get_drvdata(dev);
@@ -443,36 +444,36 @@
 	if (val < 0)
 		return val;
 
-	return sprintf(buf, "%d\n", val ? 1 : 0);
+	return sprintf(buf, "%d\n", val ? 2 : 1);
 }
 
 /* 2 attributes per channel: pwm and mode */
-static SENSOR_DEVICE_ATTR(fan1_pwm, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR,
 			show_pwm, store_pwm, 0);
-static SENSOR_DEVICE_ATTR(fan1_mode, S_IRUGO | S_IWUSR,
-			show_mode, store_mode, 0);
-static SENSOR_DEVICE_ATTR(fan2_pwm, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+			show_enable, store_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
 			show_pwm, store_pwm, 1);
-static SENSOR_DEVICE_ATTR(fan2_mode, S_IRUGO | S_IWUSR,
-			show_mode, store_mode, 1);
-static SENSOR_DEVICE_ATTR(fan3_pwm, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
+			show_enable, store_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR,
 			show_pwm, store_pwm, 2);
-static SENSOR_DEVICE_ATTR(fan3_mode, S_IRUGO | S_IWUSR,
-			show_mode, store_mode, 2);
-static SENSOR_DEVICE_ATTR(fan4_pwm, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
+			show_enable, store_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR,
 			show_pwm, store_pwm, 3);
-static SENSOR_DEVICE_ATTR(fan4_mode, S_IRUGO | S_IWUSR,
-			show_mode, store_mode, 3);
+static SENSOR_DEVICE_ATTR(pwm4_enable, S_IRUGO | S_IWUSR,
+			show_enable, store_enable, 3);
 
 static struct attribute *nct7904_fanctl_attrs[] = {
-	&sensor_dev_attr_fan1_pwm.dev_attr.attr,
-	&sensor_dev_attr_fan1_mode.dev_attr.attr,
-	&sensor_dev_attr_fan2_pwm.dev_attr.attr,
-	&sensor_dev_attr_fan2_mode.dev_attr.attr,
-	&sensor_dev_attr_fan3_pwm.dev_attr.attr,
-	&sensor_dev_attr_fan3_mode.dev_attr.attr,
-	&sensor_dev_attr_fan4_pwm.dev_attr.attr,
-	&sensor_dev_attr_fan4_mode.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm4.dev_attr.attr,
+	&sensor_dev_attr_pwm4_enable.dev_attr.attr,
 	NULL
 };
 
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c
index 4e70f51..cc5a357 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel.c
@@ -1464,7 +1464,7 @@
 {
 	int i;
 
-	for (i = from; i >= 0; i++) {
+	for (i = from; i >= 0; i--) {
 		if (data->triggers[i].indio_trig) {
 			iio_trigger_unregister(data->triggers[i].indio_trig);
 			data->triggers[i].indio_trig = NULL;
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index e8e2077..13ea1ea 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -557,21 +557,21 @@
 	if (src & MMA8452_TRANSIENT_SRC_XTRANSE)
 		iio_push_event(indio_dev,
 			       IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
-						  IIO_EV_TYPE_THRESH,
+						  IIO_EV_TYPE_MAG,
 						  IIO_EV_DIR_RISING),
 			       ts);
 
 	if (src & MMA8452_TRANSIENT_SRC_YTRANSE)
 		iio_push_event(indio_dev,
 			       IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y,
-						  IIO_EV_TYPE_THRESH,
+						  IIO_EV_TYPE_MAG,
 						  IIO_EV_DIR_RISING),
 			       ts);
 
 	if (src & MMA8452_TRANSIENT_SRC_ZTRANSE)
 		iio_push_event(indio_dev,
 			       IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z,
-						  IIO_EV_TYPE_THRESH,
+						  IIO_EV_TYPE_MAG,
 						  IIO_EV_DIR_RISING),
 			       ts);
 }
@@ -644,7 +644,7 @@
 
 static const struct iio_event_spec mma8452_transient_event[] = {
 	{
-		.type = IIO_EV_TYPE_THRESH,
+		.type = IIO_EV_TYPE_MAG,
 		.dir = IIO_EV_DIR_RISING,
 		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
 		.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7c55658..eb0cd89 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -153,8 +153,7 @@
 
 config CC10001_ADC
 	tristate "Cosmic Circuits 10001 ADC driver"
-	depends on HAVE_CLK || REGULATOR
-	depends on HAS_IOMEM
+	depends on HAS_IOMEM && HAVE_CLK && REGULATOR
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 8a0eb4a..7b40925 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -182,7 +182,7 @@
 	u8	ts_pen_detect_sensitivity;
 
 	/* startup time calculate function */
-	u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz);
+	u32 (*calc_startup_ticks)(u32 startup_time, u32 adc_clk_khz);
 
 	u8	num_channels;
 	struct at91_adc_reg_desc registers;
@@ -201,7 +201,7 @@
 	u8			num_channels;
 	void __iomem		*reg_base;
 	struct at91_adc_reg_desc *registers;
-	u8			startup_time;
+	u32			startup_time;
 	u8			sample_hold_time;
 	bool			sleep_mode;
 	struct iio_trigger	**trig;
@@ -779,7 +779,7 @@
 	return ret;
 }
 
-static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz)
+static u32 calc_startup_ticks_9260(u32 startup_time, u32 adc_clk_khz)
 {
 	/*
 	 * Number of ticks needed to cover the startup time of the ADC
@@ -790,7 +790,7 @@
 	return round_up((startup_time * adc_clk_khz / 1000) - 1, 8) / 8;
 }
 
-static u32 calc_startup_ticks_9x5(u8 startup_time, u32 adc_clk_khz)
+static u32 calc_startup_ticks_9x5(u32 startup_time, u32 adc_clk_khz)
 {
 	/*
 	 * For sama5d3x and at91sam9x5, the formula changes to:
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index 8d9c9b9..d819823 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -299,6 +299,8 @@
 	indio_dev->channels = chip_info->channels;
 	indio_dev->num_channels = chip_info->num_channels;
 
+	adc->chip_info = chip_info;
+
 	adc->transfer[0].tx_buf = &adc->tx_buf;
 	adc->transfer[0].len = sizeof(adc->tx_buf);
 	adc->transfer[1].rx_buf = adc->rx_buf;
diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index 8d4e019..9c311c1 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -349,3 +349,7 @@
 };
 
 module_platform_driver(rockchip_saradc_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("Rockchip SARADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
index 06f4792..ebe415f 100644
--- a/drivers/iio/adc/twl4030-madc.c
+++ b/drivers/iio/adc/twl4030-madc.c
@@ -833,7 +833,8 @@
 	irq = platform_get_irq(pdev, 0);
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 				   twl4030_madc_threaded_irq_handler,
-				   IRQF_TRIGGER_RISING, "twl4030_madc", madc);
+				   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				   "twl4030_madc", madc);
 	if (ret) {
 		dev_err(&pdev->dev, "could not request irq\n");
 		goto err_i2c;
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
index 480f335..819632b 100644
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -635,7 +635,7 @@
 	struct vf610_adc *info = iio_priv(indio_dev);
 
 	if ((readval == NULL) ||
-		(!(reg % 4) || (reg > VF610_REG_ADC_PCTL)))
+		((reg % 4) || (reg > VF610_REG_ADC_PCTL)))
 		return -EINVAL;
 
 	*readval = readl(info->regs + reg);
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 610fc98..5955110 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -36,6 +36,8 @@
 	s32 poll_value = 0;
 
 	if (state) {
+		if (!atomic_read(&st->user_requested_state))
+			return 0;
 		if (sensor_hub_device_open(st->hsdev))
 			return -EIO;
 
@@ -52,8 +54,12 @@
 
 		poll_value = hid_sensor_read_poll_value(st);
 	} else {
-		if (!atomic_dec_and_test(&st->data_ready))
+		int val;
+
+		val = atomic_dec_if_positive(&st->data_ready);
+		if (val < 0)
 			return 0;
+
 		sensor_hub_device_close(st->hsdev);
 		state_val = hid_sensor_get_usage_index(st->hsdev,
 			st->power_state.report_id,
@@ -92,9 +98,11 @@
 
 int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 {
+
 #ifdef CONFIG_PM
 	int ret;
 
+	atomic_set(&st->user_requested_state, state);
 	if (state)
 		ret = pm_runtime_get_sync(&st->pdev->dev);
 	else {
@@ -109,6 +117,7 @@
 
  	return 0;
 #else
+	atomic_set(&st->user_requested_state, state);
 	return _hid_sensor_power_state(st, state);
 #endif
 }
diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c
index 61bb9d4..e98428d 100644
--- a/drivers/iio/dac/ad5624r_spi.c
+++ b/drivers/iio/dac/ad5624r_spi.c
@@ -22,7 +22,7 @@
 #include "ad5624r.h"
 
 static int ad5624r_spi_write(struct spi_device *spi,
-			     u8 cmd, u8 addr, u16 val, u8 len)
+			     u8 cmd, u8 addr, u16 val, u8 shift)
 {
 	u32 data;
 	u8 msg[3];
@@ -35,7 +35,7 @@
 	 * 14-, 12-bit input code followed by 0, 2, or 4 don't care bits,
 	 * for the AD5664R, AD5644R, and AD5624R, respectively.
 	 */
-	data = (0 << 22) | (cmd << 19) | (addr << 16) | (val << (16 - len));
+	data = (0 << 22) | (cmd << 19) | (addr << 16) | (val << shift);
 	msg[0] = data >> 16;
 	msg[1] = data >> 8;
 	msg[2] = data;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 17d4bb1..65ce868 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -431,6 +431,23 @@
 	return -EINVAL;
 }
 
+static int inv_write_raw_get_fmt(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			return IIO_VAL_INT_PLUS_NANO;
+		default:
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	default:
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+
+	return -EINVAL;
+}
 static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val)
 {
 	int result, i;
@@ -696,6 +713,7 @@
 	.driver_module = THIS_MODULE,
 	.read_raw = &inv_mpu6050_read_raw,
 	.write_raw = &inv_mpu6050_write_raw,
+	.write_raw_get_fmt = &inv_write_raw_get_fmt,
 	.attrs = &inv_attribute_group,
 	.validate_trigger = inv_mpu6050_validate_trigger,
 };
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index e6198b7..a5c5925 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -188,6 +188,7 @@
 config LTR501
 	tristate "LTR-501ALS-01 light sensor"
 	depends on I2C
+	select REGMAP_I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
@@ -201,6 +202,7 @@
 config STK3310
 	tristate "STK3310 ALS and proximity sensor"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	 Say yes here to get support for the Sensortek STK3310 ambient light
 	 and proximity sensor. The STK3311 model is also supported by this
diff --git a/drivers/iio/light/cm3323.c b/drivers/iio/light/cm3323.c
index 869033e..a1d4905 100644
--- a/drivers/iio/light/cm3323.c
+++ b/drivers/iio/light/cm3323.c
@@ -123,7 +123,7 @@
 	for (i = 0; i < ARRAY_SIZE(cm3323_int_time); i++) {
 		if (val == cm3323_int_time[i].val &&
 		    val2 == cm3323_int_time[i].val2) {
-			reg_conf = data->reg_conf;
+			reg_conf = data->reg_conf & ~CM3323_CONF_IT_MASK;
 			reg_conf |= i << CM3323_CONF_IT_SHIFT;
 
 			ret = i2c_smbus_write_word_data(data->client,
diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
index 1ef7d37..b5a0e66 100644
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1302,7 +1302,7 @@
 	if (ret < 0)
 		return ret;
 
-	data->als_contr = ret | data->chip_info->als_mode_active;
+	data->als_contr = status | data->chip_info->als_mode_active;
 
 	ret = regmap_read(data->regmap, LTR501_PS_CONTR, &status);
 	if (ret < 0)
diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
index fee4297..11a027a 100644
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -43,7 +43,6 @@
 #define STK3311_CHIP_ID_VAL			0x1D
 #define STK3310_PSINT_EN			0x01
 #define STK3310_PS_MAX_VAL			0xFFFF
-#define STK3310_THRESH_MAX			0xFFFF
 
 #define STK3310_DRIVER_NAME			"stk3310"
 #define STK3310_REGMAP_NAME			"stk3310_regmap"
@@ -84,15 +83,13 @@
 				REG_FIELD(STK3310_REG_FLAG, 4, 4);
 static const struct reg_field stk3310_reg_field_flag_nf =
 				REG_FIELD(STK3310_REG_FLAG, 0, 0);
-/*
- * Maximum PS values with regard to scale. Used to export the 'inverse'
- * PS value (high values for far objects, low values for near objects).
- */
+
+/* Estimate maximum proximity values with regard to measurement scale. */
 static const int stk3310_ps_max[4] = {
-	STK3310_PS_MAX_VAL / 64,
-	STK3310_PS_MAX_VAL / 16,
-	STK3310_PS_MAX_VAL /  4,
-	STK3310_PS_MAX_VAL,
+	STK3310_PS_MAX_VAL / 640,
+	STK3310_PS_MAX_VAL / 160,
+	STK3310_PS_MAX_VAL /  40,
+	STK3310_PS_MAX_VAL /  10
 };
 
 static const int stk3310_scale_table[][2] = {
@@ -128,14 +125,14 @@
 	/* Proximity event */
 	{
 		.type = IIO_EV_TYPE_THRESH,
-		.dir = IIO_EV_DIR_FALLING,
+		.dir = IIO_EV_DIR_RISING,
 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 				 BIT(IIO_EV_INFO_ENABLE),
 	},
 	/* Out-of-proximity event */
 	{
 		.type = IIO_EV_TYPE_THRESH,
-		.dir = IIO_EV_DIR_RISING,
+		.dir = IIO_EV_DIR_FALLING,
 		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 				 BIT(IIO_EV_INFO_ENABLE),
 	},
@@ -203,25 +200,18 @@
 			      int *val, int *val2)
 {
 	u8 reg;
-	u16 buf;
+	__be16 buf;
 	int ret;
-	unsigned int index;
 	struct stk3310_data *data = iio_priv(indio_dev);
 
 	if (info != IIO_EV_INFO_VALUE)
 		return -EINVAL;
 
-	/*
-	 * Only proximity interrupts are implemented at the moment.
-	 * Since we're inverting proximity values, the sensor's 'high'
-	 * threshold will become our 'low' threshold, associated with
-	 * 'near' events. Similarly, the sensor's 'low' threshold will
-	 * be our 'high' threshold, associated with 'far' events.
-	 */
+	/* Only proximity interrupts are implemented at the moment. */
 	if (dir == IIO_EV_DIR_RISING)
-		reg = STK3310_REG_THDL_PS;
-	else if (dir == IIO_EV_DIR_FALLING)
 		reg = STK3310_REG_THDH_PS;
+	else if (dir == IIO_EV_DIR_FALLING)
+		reg = STK3310_REG_THDL_PS;
 	else
 		return -EINVAL;
 
@@ -232,8 +222,7 @@
 		dev_err(&data->client->dev, "register read failed\n");
 		return ret;
 	}
-	regmap_field_read(data->reg_ps_gain, &index);
-	*val = swab16(stk3310_ps_max[index] - buf);
+	*val = be16_to_cpu(buf);
 
 	return IIO_VAL_INT;
 }
@@ -246,7 +235,7 @@
 			       int val, int val2)
 {
 	u8 reg;
-	u16 buf;
+	__be16 buf;
 	int ret;
 	unsigned int index;
 	struct stk3310_data *data = iio_priv(indio_dev);
@@ -257,13 +246,13 @@
 		return -EINVAL;
 
 	if (dir == IIO_EV_DIR_RISING)
-		reg = STK3310_REG_THDL_PS;
-	else if (dir == IIO_EV_DIR_FALLING)
 		reg = STK3310_REG_THDH_PS;
+	else if (dir == IIO_EV_DIR_FALLING)
+		reg = STK3310_REG_THDL_PS;
 	else
 		return -EINVAL;
 
-	buf = swab16(stk3310_ps_max[index] - val);
+	buf = cpu_to_be16(val);
 	ret = regmap_bulk_write(data->regmap, reg, &buf, 2);
 	if (ret < 0)
 		dev_err(&client->dev, "failed to set PS threshold!\n");
@@ -312,7 +301,7 @@
 			    int *val, int *val2, long mask)
 {
 	u8 reg;
-	u16 buf;
+	__be16 buf;
 	int ret;
 	unsigned int index;
 	struct stk3310_data *data = iio_priv(indio_dev);
@@ -333,15 +322,7 @@
 			mutex_unlock(&data->lock);
 			return ret;
 		}
-		*val = swab16(buf);
-		if (chan->type == IIO_PROXIMITY) {
-			/*
-			 * Invert the proximity data so we return low values
-			 * for close objects and high values for far ones.
-			 */
-			regmap_field_read(data->reg_ps_gain, &index);
-			*val = stk3310_ps_max[index] - *val;
-		}
+		*val = be16_to_cpu(buf);
 		mutex_unlock(&data->lock);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_INT_TIME:
@@ -581,8 +562,8 @@
 	}
 	event = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 1,
 				     IIO_EV_TYPE_THRESH,
-				     (dir ? IIO_EV_DIR_RISING :
-					    IIO_EV_DIR_FALLING));
+				     (dir ? IIO_EV_DIR_FALLING :
+					    IIO_EV_DIR_RISING));
 	iio_push_event(indio_dev, event, data->timestamp);
 
 	/* Reset the interrupt flag */
@@ -627,13 +608,7 @@
 	if (ret < 0)
 		return ret;
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "device_register failed\n");
-		stk3310_set_state(data, STK3310_STATE_STANDBY);
-	}
-
-	if (client->irq <= 0)
+	if (client->irq < 0)
 		client->irq = stk3310_gpio_probe(client);
 
 	if (client->irq >= 0) {
@@ -648,6 +623,12 @@
 					client->irq);
 	}
 
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "device_register failed\n");
+		stk3310_set_state(data, STK3310_STATE_STANDBY);
+	}
+
 	return ret;
 }
 
diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
index 71c2bde..f8b1df0 100644
--- a/drivers/iio/light/tcs3414.c
+++ b/drivers/iio/light/tcs3414.c
@@ -185,7 +185,7 @@
 		if (val != 0)
 			return -EINVAL;
 		for (i = 0; i < ARRAY_SIZE(tcs3414_times); i++) {
-			if (val == tcs3414_times[i] * 1000) {
+			if (val2 == tcs3414_times[i] * 1000) {
 				data->timing &= ~TCS3414_INTEG_MASK;
 				data->timing |= i;
 				return i2c_smbus_write_byte_data(
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index dcadfc4..efb9350 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -90,6 +90,7 @@
 config BMC150_MAGN
 	tristate "Bosch BMC150 Magnetometer Driver"
 	depends on I2C
+	select REGMAP_I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
diff --git a/drivers/iio/magnetometer/bmc150_magn.c b/drivers/iio/magnetometer/bmc150_magn.c
index d4c1788..1347a1f 100644
--- a/drivers/iio/magnetometer/bmc150_magn.c
+++ b/drivers/iio/magnetometer/bmc150_magn.c
@@ -706,11 +706,11 @@
 		goto err_poweroff;
 	}
 	if (chip_id != BMC150_MAGN_CHIP_ID_VAL) {
-		dev_err(&data->client->dev, "Invalid chip id 0x%x\n", ret);
+		dev_err(&data->client->dev, "Invalid chip id 0x%x\n", chip_id);
 		ret = -ENODEV;
 		goto err_poweroff;
 	}
-	dev_dbg(&data->client->dev, "Chip id %x\n", ret);
+	dev_dbg(&data->client->dev, "Chip id %x\n", chip_id);
 
 	preset = bmc150_magn_presets_table[BMC150_MAGN_DEFAULT_PRESET];
 	ret = bmc150_magn_set_odr(data, preset.odr);
diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c
index 7a2ea71..706ebfd 100644
--- a/drivers/iio/magnetometer/mmc35240.c
+++ b/drivers/iio/magnetometer/mmc35240.c
@@ -84,10 +84,10 @@
 #define MMC35240_OTP_START_ADDR		0x1B
 
 enum mmc35240_resolution {
-	MMC35240_16_BITS_SLOW = 0, /* 100 Hz */
-	MMC35240_16_BITS_FAST,     /* 200 Hz */
-	MMC35240_14_BITS,          /* 333 Hz */
-	MMC35240_12_BITS,          /* 666 Hz */
+	MMC35240_16_BITS_SLOW = 0, /* 7.92 ms */
+	MMC35240_16_BITS_FAST,     /* 4.08 ms */
+	MMC35240_14_BITS,          /* 2.16 ms */
+	MMC35240_12_BITS,          /* 1.20 ms */
 };
 
 enum mmc35240_axis {
@@ -100,22 +100,22 @@
 	int sens[3]; /* sensitivity per X, Y, Z axis */
 	int nfo; /* null field output */
 } mmc35240_props_table[] = {
-	/* 16 bits, 100Hz ODR */
+	/* 16 bits, 125Hz ODR */
 	{
 		{1024, 1024, 1024},
 		32768,
 	},
-	/* 16 bits, 200Hz ODR */
+	/* 16 bits, 250Hz ODR */
 	{
 		{1024, 1024, 770},
 		32768,
 	},
-	/* 14 bits, 333Hz ODR */
+	/* 14 bits, 450Hz ODR */
 	{
 		{256, 256, 193},
 		8192,
 	},
-	/* 12 bits, 666Hz ODR */
+	/* 12 bits, 800Hz ODR */
 	{
 		{64, 64, 48},
 		2048,
@@ -133,9 +133,15 @@
 	int axis_scale[3];
 };
 
-static const int mmc35240_samp_freq[] = {100, 200, 333, 666};
+static const struct {
+	int val;
+	int val2;
+} mmc35240_samp_freq[] = { {1, 500000},
+			   {13, 0},
+			   {25, 0},
+			   {50, 0} };
 
-static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("100 200 333 666");
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1.5 13 25 50");
 
 #define MMC35240_CHANNEL(_axis) { \
 	.type = IIO_MAGN, \
@@ -168,7 +174,8 @@
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(mmc35240_samp_freq); i++)
-		if (mmc35240_samp_freq[i] == val)
+		if (mmc35240_samp_freq[i].val == val &&
+		    mmc35240_samp_freq[i].val2 == val2)
 			return i;
 	return -EINVAL;
 }
@@ -195,8 +202,8 @@
 		coil_bit = MMC35240_CTRL0_RESET_BIT;
 
 	return regmap_update_bits(data->regmap, MMC35240_REG_CTRL0,
-				  MMC35240_CTRL0_REFILL_BIT,
-				  coil_bit);
+				  coil_bit, coil_bit);
+
 }
 
 static int mmc35240_init(struct mmc35240_data *data)
@@ -215,14 +222,15 @@
 
 	/*
 	 * make sure we restore sensor characteristics, by doing
-	 * a RESET/SET sequence
+	 * a SET/RESET sequence, the axis polarity being naturally
+	 * aligned after RESET
 	 */
-	ret = mmc35240_hw_set(data, false);
+	ret = mmc35240_hw_set(data, true);
 	if (ret < 0)
 		return ret;
 	usleep_range(MMC53240_WAIT_SET_RESET, MMC53240_WAIT_SET_RESET + 1);
 
-	ret = mmc35240_hw_set(data, true);
+	ret = mmc35240_hw_set(data, false);
 	if (ret < 0)
 		return ret;
 
@@ -378,9 +386,9 @@
 		if (i < 0 || i >= ARRAY_SIZE(mmc35240_samp_freq))
 			return -EINVAL;
 
-		*val = mmc35240_samp_freq[i];
-		*val2 = 0;
-		return IIO_VAL_INT;
+		*val = mmc35240_samp_freq[i].val;
+		*val2 = mmc35240_samp_freq[i].val2;
+		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;
 	}
@@ -496,6 +504,7 @@
 	}
 
 	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
 	data->regmap = regmap;
 	data->res = MMC35240_16_BITS_SLOW;
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
index 2042e37..3d756bd 100644
--- a/drivers/iio/proximity/sx9500.c
+++ b/drivers/iio/proximity/sx9500.c
@@ -80,6 +80,7 @@
 #define SX9500_COMPSTAT_MASK		GENMASK(3, 0)
 
 #define SX9500_NUM_CHANNELS		4
+#define SX9500_CHAN_MASK		GENMASK(SX9500_NUM_CHANNELS - 1, 0)
 
 struct sx9500_data {
 	struct mutex mutex;
@@ -281,7 +282,7 @@
 	if (ret < 0)
 		return ret;
 
-	*val = 32767 - (s16)be16_to_cpu(regval);
+	*val = be16_to_cpu(regval);
 
 	return IIO_VAL_INT;
 }
@@ -329,27 +330,29 @@
 	else
 		ret = sx9500_wait_for_sample(data);
 
-	if (ret < 0)
-		return ret;
-
 	mutex_lock(&data->mutex);
 
+	if (ret < 0)
+		goto out_dec_data_rdy;
+
 	ret = sx9500_read_prox_data(data, chan, val);
 	if (ret < 0)
-		goto out;
-
-	ret = sx9500_dec_chan_users(data, chan->channel);
-	if (ret < 0)
-		goto out;
+		goto out_dec_data_rdy;
 
 	ret = sx9500_dec_data_rdy_users(data);
 	if (ret < 0)
+		goto out_dec_chan;
+
+	ret = sx9500_dec_chan_users(data, chan->channel);
+	if (ret < 0)
 		goto out;
 
 	ret = IIO_VAL_INT;
 
 	goto out;
 
+out_dec_data_rdy:
+	sx9500_dec_data_rdy_users(data);
 out_dec_chan:
 	sx9500_dec_chan_users(data, chan->channel);
 out:
@@ -679,7 +682,7 @@
 static int sx9500_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct sx9500_data *data = iio_priv(indio_dev);
-	int ret, i;
+	int ret = 0, i;
 
 	mutex_lock(&data->mutex);
 
@@ -703,7 +706,7 @@
 static int sx9500_buffer_predisable(struct iio_dev *indio_dev)
 {
 	struct sx9500_data *data = iio_priv(indio_dev);
-	int ret, i;
+	int ret = 0, i;
 
 	iio_triggered_buffer_predisable(indio_dev);
 
@@ -800,8 +803,7 @@
 	unsigned int val;
 
 	ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
-				 GENMASK(SX9500_NUM_CHANNELS, 0),
-				 GENMASK(SX9500_NUM_CHANNELS, 0));
+				 SX9500_CHAN_MASK, SX9500_CHAN_MASK);
 	if (ret < 0)
 		return ret;
 
@@ -821,7 +823,7 @@
 
 out:
 	regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
-			   GENMASK(SX9500_NUM_CHANNELS, 0), 0);
+			   SX9500_CHAN_MASK, 0);
 	return ret;
 }
 
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
index cb2e8ad..7a2b639 100644
--- a/drivers/iio/temperature/mlx90614.c
+++ b/drivers/iio/temperature/mlx90614.c
@@ -204,7 +204,7 @@
 		*val = ret;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_OFFSET:
-		*val = 13657;
+		*val = -13657;
 		*val2 = 500000;
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_SCALE:
diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c
index fcc49f8..8f21f32 100644
--- a/drivers/iio/temperature/tmp006.c
+++ b/drivers/iio/temperature/tmp006.c
@@ -132,6 +132,9 @@
 	struct tmp006_data *data = iio_priv(indio_dev);
 	int i;
 
+	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+		return -EINVAL;
+
 	for (i = 0; i < ARRAY_SIZE(tmp006_freqs); i++)
 		if ((val == tmp006_freqs[i][0]) &&
 		    (val2 == tmp006_freqs[i][1])) {
diff --git a/drivers/infiniband/core/agent.c b/drivers/infiniband/core/agent.c
index c7dcfe4..0429040 100644
--- a/drivers/infiniband/core/agent.c
+++ b/drivers/infiniband/core/agent.c
@@ -88,7 +88,7 @@
 	struct ib_ah *ah;
 	struct ib_mad_send_wr_private *mad_send_wr;
 
-	if (device->node_type == RDMA_NODE_IB_SWITCH)
+	if (rdma_cap_ib_switch(device))
 		port_priv = ib_get_agent_port(device, 0);
 	else
 		port_priv = ib_get_agent_port(device, port_num);
@@ -122,7 +122,7 @@
 	memcpy(send_buf->mad, mad_hdr, resp_mad_len);
 	send_buf->ah = ah;
 
-	if (device->node_type == RDMA_NODE_IB_SWITCH) {
+	if (rdma_cap_ib_switch(device)) {
 		mad_send_wr = container_of(send_buf,
 					   struct ib_mad_send_wr_private,
 					   send_buf);
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index dbddddd..3a972eb 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -169,6 +169,7 @@
 	struct ib_device *ib_device;
 	struct device *device;
 	u8 ack_delay;
+	int going_down;
 	struct cm_port *port[0];
 };
 
@@ -805,6 +806,11 @@
 {
 	int wait_time;
 	unsigned long flags;
+	struct cm_device *cm_dev;
+
+	cm_dev = ib_get_client_data(cm_id_priv->id.device, &cm_client);
+	if (!cm_dev)
+		return;
 
 	spin_lock_irqsave(&cm.lock, flags);
 	cm_cleanup_timewait(cm_id_priv->timewait_info);
@@ -818,8 +824,14 @@
 	 */
 	cm_id_priv->id.state = IB_CM_TIMEWAIT;
 	wait_time = cm_convert_to_ms(cm_id_priv->av.timeout);
-	queue_delayed_work(cm.wq, &cm_id_priv->timewait_info->work.work,
-			   msecs_to_jiffies(wait_time));
+
+	/* Check if the device started its remove_one */
+	spin_lock_irq(&cm.lock);
+	if (!cm_dev->going_down)
+		queue_delayed_work(cm.wq, &cm_id_priv->timewait_info->work.work,
+				   msecs_to_jiffies(wait_time));
+	spin_unlock_irq(&cm.lock);
+
 	cm_id_priv->timewait_info = NULL;
 }
 
@@ -3305,6 +3317,11 @@
 	struct cm_work *work;
 	unsigned long flags;
 	int ret = 0;
+	struct cm_device *cm_dev;
+
+	cm_dev = ib_get_client_data(cm_id->device, &cm_client);
+	if (!cm_dev)
+		return -ENODEV;
 
 	work = kmalloc(sizeof *work, GFP_ATOMIC);
 	if (!work)
@@ -3343,7 +3360,17 @@
 	work->remote_id = cm_id->remote_id;
 	work->mad_recv_wc = NULL;
 	work->cm_event.event = IB_CM_USER_ESTABLISHED;
-	queue_delayed_work(cm.wq, &work->work, 0);
+
+	/* Check if the device started its remove_one */
+	spin_lock_irq(&cm.lock);
+	if (!cm_dev->going_down) {
+		queue_delayed_work(cm.wq, &work->work, 0);
+	} else {
+		kfree(work);
+		ret = -ENODEV;
+	}
+	spin_unlock_irq(&cm.lock);
+
 out:
 	return ret;
 }
@@ -3394,6 +3421,7 @@
 	enum ib_cm_event_type event;
 	u16 attr_id;
 	int paths = 0;
+	int going_down = 0;
 
 	switch (mad_recv_wc->recv_buf.mad->mad_hdr.attr_id) {
 	case CM_REQ_ATTR_ID:
@@ -3452,7 +3480,19 @@
 	work->cm_event.event = event;
 	work->mad_recv_wc = mad_recv_wc;
 	work->port = port;
-	queue_delayed_work(cm.wq, &work->work, 0);
+
+	/* Check if the device started its remove_one */
+	spin_lock_irq(&cm.lock);
+	if (!port->cm_dev->going_down)
+		queue_delayed_work(cm.wq, &work->work, 0);
+	else
+		going_down = 1;
+	spin_unlock_irq(&cm.lock);
+
+	if (going_down) {
+		kfree(work);
+		ib_free_recv_mad(mad_recv_wc);
+	}
 }
 
 static int cm_init_qp_init_attr(struct cm_id_private *cm_id_priv,
@@ -3771,7 +3811,7 @@
 
 	cm_dev->ib_device = ib_device;
 	cm_get_ack_delay(cm_dev);
-
+	cm_dev->going_down = 0;
 	cm_dev->device = device_create(&cm_class, &ib_device->dev,
 				       MKDEV(0, 0), NULL,
 				       "%s", ib_device->name);
@@ -3864,14 +3904,23 @@
 	list_del(&cm_dev->list);
 	write_unlock_irqrestore(&cm.device_lock, flags);
 
+	spin_lock_irq(&cm.lock);
+	cm_dev->going_down = 1;
+	spin_unlock_irq(&cm.lock);
+
 	for (i = 1; i <= ib_device->phys_port_cnt; i++) {
 		if (!rdma_cap_ib_cm(ib_device, i))
 			continue;
 
 		port = cm_dev->port[i-1];
 		ib_modify_port(ib_device, port->port_num, 0, &port_modify);
-		ib_unregister_mad_agent(port->mad_agent);
+		/*
+		 * We flush the queue here after the going_down set, this
+		 * verify that no new works will be queued in the recv handler,
+		 * after that we can call the unregister_mad_agent
+		 */
 		flush_workqueue(cm.wq);
+		ib_unregister_mad_agent(port->mad_agent);
 		cm_remove_port_fs(port);
 	}
 	device_unregister(cm_dev->device);
diff --git a/drivers/infiniband/core/iwpm_msg.c b/drivers/infiniband/core/iwpm_msg.c
index e6ffa2e..22a3abe 100644
--- a/drivers/infiniband/core/iwpm_msg.c
+++ b/drivers/infiniband/core/iwpm_msg.c
@@ -67,7 +67,8 @@
 		err_str = "Invalid port mapper client";
 		goto pid_query_error;
 	}
-	if (iwpm_registered_client(nl_client))
+	if (iwpm_check_registration(nl_client, IWPM_REG_VALID) ||
+			iwpm_user_pid == IWPM_PID_UNAVAILABLE)
 		return 0;
 	skb = iwpm_create_nlmsg(RDMA_NL_IWPM_REG_PID, &nlh, nl_client);
 	if (!skb) {
@@ -106,7 +107,6 @@
 	ret = ibnl_multicast(skb, nlh, RDMA_NL_GROUP_IWPM, GFP_KERNEL);
 	if (ret) {
 		skb = NULL; /* skb is freed in the netlink send-op handling */
-		iwpm_set_registered(nl_client, 1);
 		iwpm_user_pid = IWPM_PID_UNAVAILABLE;
 		err_str = "Unable to send a nlmsg";
 		goto pid_query_error;
@@ -144,12 +144,12 @@
 		err_str = "Invalid port mapper client";
 		goto add_mapping_error;
 	}
-	if (!iwpm_registered_client(nl_client)) {
+	if (!iwpm_valid_pid())
+		return 0;
+	if (!iwpm_check_registration(nl_client, IWPM_REG_VALID)) {
 		err_str = "Unregistered port mapper client";
 		goto add_mapping_error;
 	}
-	if (!iwpm_valid_pid())
-		return 0;
 	skb = iwpm_create_nlmsg(RDMA_NL_IWPM_ADD_MAPPING, &nlh, nl_client);
 	if (!skb) {
 		err_str = "Unable to create a nlmsg";
@@ -214,12 +214,12 @@
 		err_str = "Invalid port mapper client";
 		goto query_mapping_error;
 	}
-	if (!iwpm_registered_client(nl_client)) {
+	if (!iwpm_valid_pid())
+		return 0;
+	if (!iwpm_check_registration(nl_client, IWPM_REG_VALID)) {
 		err_str = "Unregistered port mapper client";
 		goto query_mapping_error;
 	}
-	if (!iwpm_valid_pid())
-		return 0;
 	ret = -ENOMEM;
 	skb = iwpm_create_nlmsg(RDMA_NL_IWPM_QUERY_MAPPING, &nlh, nl_client);
 	if (!skb) {
@@ -288,12 +288,12 @@
 		err_str = "Invalid port mapper client";
 		goto remove_mapping_error;
 	}
-	if (!iwpm_registered_client(nl_client)) {
+	if (!iwpm_valid_pid())
+		return 0;
+	if (iwpm_check_registration(nl_client, IWPM_REG_UNDEF)) {
 		err_str = "Unregistered port mapper client";
 		goto remove_mapping_error;
 	}
-	if (!iwpm_valid_pid())
-		return 0;
 	skb = iwpm_create_nlmsg(RDMA_NL_IWPM_REMOVE_MAPPING, &nlh, nl_client);
 	if (!skb) {
 		ret = -ENOMEM;
@@ -388,7 +388,7 @@
 	pr_debug("%s: iWarp Port Mapper (pid = %d) is available!\n",
 			__func__, iwpm_user_pid);
 	if (iwpm_valid_client(nl_client))
-		iwpm_set_registered(nl_client, 1);
+		iwpm_set_registration(nl_client, IWPM_REG_VALID);
 register_pid_response_exit:
 	nlmsg_request->request_done = 1;
 	/* always for found nlmsg_request */
@@ -644,7 +644,6 @@
 {
 	struct nlattr *nltb[IWPM_NLA_MAPINFO_REQ_MAX];
 	const char *msg_type = "Mapping Info response";
-	int iwpm_pid;
 	u8 nl_client;
 	char *iwpm_name;
 	u16 iwpm_version;
@@ -669,14 +668,14 @@
 				__func__, nl_client);
 		return ret;
 	}
-	iwpm_set_registered(nl_client, 0);
+	iwpm_set_registration(nl_client, IWPM_REG_INCOMPL);
 	atomic_set(&echo_nlmsg_seq, cb->nlh->nlmsg_seq);
+	iwpm_user_pid = cb->nlh->nlmsg_pid;
 	if (!iwpm_mapinfo_available())
 		return 0;
-	iwpm_pid = cb->nlh->nlmsg_pid;
 	pr_debug("%s: iWarp Port Mapper (pid = %d) is available!\n",
-		 __func__, iwpm_pid);
-	ret = iwpm_send_mapinfo(nl_client, iwpm_pid);
+		 __func__, iwpm_user_pid);
+	ret = iwpm_send_mapinfo(nl_client, iwpm_user_pid);
 	return ret;
 }
 EXPORT_SYMBOL(iwpm_mapping_info_cb);
diff --git a/drivers/infiniband/core/iwpm_util.c b/drivers/infiniband/core/iwpm_util.c
index a626795..5fb089e 100644
--- a/drivers/infiniband/core/iwpm_util.c
+++ b/drivers/infiniband/core/iwpm_util.c
@@ -78,6 +78,7 @@
 	mutex_unlock(&iwpm_admin_lock);
 	if (!ret) {
 		iwpm_set_valid(nl_client, 1);
+		iwpm_set_registration(nl_client, IWPM_REG_UNDEF);
 		pr_debug("%s: Mapinfo and reminfo tables are created\n",
 				__func__);
 	}
@@ -106,6 +107,7 @@
 	}
 	mutex_unlock(&iwpm_admin_lock);
 	iwpm_set_valid(nl_client, 0);
+	iwpm_set_registration(nl_client, IWPM_REG_UNDEF);
 	return 0;
 }
 EXPORT_SYMBOL(iwpm_exit);
@@ -397,17 +399,23 @@
 }
 
 /* valid client */
-int iwpm_registered_client(u8 nl_client)
+u32 iwpm_get_registration(u8 nl_client)
 {
 	return iwpm_admin.reg_list[nl_client];
 }
 
 /* valid client */
-void iwpm_set_registered(u8 nl_client, int reg)
+void iwpm_set_registration(u8 nl_client, u32 reg)
 {
 	iwpm_admin.reg_list[nl_client] = reg;
 }
 
+/* valid client */
+u32 iwpm_check_registration(u8 nl_client, u32 reg)
+{
+	return (iwpm_get_registration(nl_client) & reg);
+}
+
 int iwpm_compare_sockaddr(struct sockaddr_storage *a_sockaddr,
 				struct sockaddr_storage *b_sockaddr)
 {
diff --git a/drivers/infiniband/core/iwpm_util.h b/drivers/infiniband/core/iwpm_util.h
index ee2d9ff..b7b9e19 100644
--- a/drivers/infiniband/core/iwpm_util.h
+++ b/drivers/infiniband/core/iwpm_util.h
@@ -58,6 +58,10 @@
 #define IWPM_PID_UNDEFINED     -1
 #define IWPM_PID_UNAVAILABLE   -2
 
+#define IWPM_REG_UNDEF          0x01
+#define IWPM_REG_VALID          0x02
+#define IWPM_REG_INCOMPL        0x04
+
 struct iwpm_nlmsg_request {
 	struct list_head    inprocess_list;
 	__u32               nlmsg_seq;
@@ -88,7 +92,7 @@
 	atomic_t refcount;
 	atomic_t nlmsg_seq;
 	int      client_list[RDMA_NL_NUM_CLIENTS];
-	int      reg_list[RDMA_NL_NUM_CLIENTS];
+	u32      reg_list[RDMA_NL_NUM_CLIENTS];
 };
 
 /**
@@ -159,19 +163,31 @@
 void iwpm_set_valid(u8 nl_client, int valid);
 
 /**
- * iwpm_registered_client - Check if the port mapper client is registered
+ * iwpm_check_registration - Check if the client registration
+ *			      matches the given one
  * @nl_client: The index of the netlink client
+ * @reg: The given registration type to compare with
  *
  * Call iwpm_register_pid() to register a client
+ * Returns true if the client registration matches reg,
+ * otherwise returns false
  */
-int iwpm_registered_client(u8 nl_client);
+u32 iwpm_check_registration(u8 nl_client, u32 reg);
 
 /**
- * iwpm_set_registered - Set the port mapper client to registered or not
+ * iwpm_set_registration - Set the client registration
  * @nl_client: The index of the netlink client
- * @reg: 1 if registered or 0 if not
+ * @reg: Registration type to set
  */
-void iwpm_set_registered(u8 nl_client, int reg);
+void iwpm_set_registration(u8 nl_client, u32 reg);
+
+/**
+ * iwpm_get_registration
+ * @nl_client: The index of the netlink client
+ *
+ * Returns the client registration type
+ */
+u32 iwpm_get_registration(u8 nl_client);
 
 /**
  * iwpm_send_mapinfo - Send local and mapped IPv4/IPv6 address info of
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index a4b1466..786fc51 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -769,7 +769,7 @@
 	bool opa = rdma_cap_opa_mad(mad_agent_priv->qp_info->port_priv->device,
 				    mad_agent_priv->qp_info->port_priv->port_num);
 
-	if (device->node_type == RDMA_NODE_IB_SWITCH &&
+	if (rdma_cap_ib_switch(device) &&
 	    smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)
 		port_num = send_wr->wr.ud.port_num;
 	else
@@ -787,14 +787,15 @@
 		if ((opa_get_smp_direction(opa_smp)
 		     ? opa_smp->route.dr.dr_dlid : opa_smp->route.dr.dr_slid) ==
 		     OPA_LID_PERMISSIVE &&
-		     opa_smi_handle_dr_smp_send(opa_smp, device->node_type,
+		     opa_smi_handle_dr_smp_send(opa_smp,
+						rdma_cap_ib_switch(device),
 						port_num) == IB_SMI_DISCARD) {
 			ret = -EINVAL;
 			dev_err(&device->dev, "OPA Invalid directed route\n");
 			goto out;
 		}
 		opa_drslid = be32_to_cpu(opa_smp->route.dr.dr_slid);
-		if (opa_drslid != OPA_LID_PERMISSIVE &&
+		if (opa_drslid != be32_to_cpu(OPA_LID_PERMISSIVE) &&
 		    opa_drslid & 0xffff0000) {
 			ret = -EINVAL;
 			dev_err(&device->dev, "OPA Invalid dr_slid 0x%x\n",
@@ -810,7 +811,7 @@
 	} else {
 		if ((ib_get_smp_direction(smp) ? smp->dr_dlid : smp->dr_slid) ==
 		     IB_LID_PERMISSIVE &&
-		     smi_handle_dr_smp_send(smp, device->node_type, port_num) ==
+		     smi_handle_dr_smp_send(smp, rdma_cap_ib_switch(device), port_num) ==
 		     IB_SMI_DISCARD) {
 			ret = -EINVAL;
 			dev_err(&device->dev, "Invalid directed route\n");
@@ -2030,7 +2031,7 @@
 	struct ib_smp *smp = (struct ib_smp *)recv->mad;
 
 	if (smi_handle_dr_smp_recv(smp,
-				   port_priv->device->node_type,
+				   rdma_cap_ib_switch(port_priv->device),
 				   port_num,
 				   port_priv->device->phys_port_cnt) ==
 				   IB_SMI_DISCARD)
@@ -2042,13 +2043,13 @@
 
 	if (retsmi == IB_SMI_SEND) { /* don't forward */
 		if (smi_handle_dr_smp_send(smp,
-					   port_priv->device->node_type,
+					   rdma_cap_ib_switch(port_priv->device),
 					   port_num) == IB_SMI_DISCARD)
 			return IB_SMI_DISCARD;
 
 		if (smi_check_local_smp(smp, port_priv->device) == IB_SMI_DISCARD)
 			return IB_SMI_DISCARD;
-	} else if (port_priv->device->node_type == RDMA_NODE_IB_SWITCH) {
+	} else if (rdma_cap_ib_switch(port_priv->device)) {
 		/* forward case for switches */
 		memcpy(response, recv, mad_priv_size(response));
 		response->header.recv_wc.wc = &response->header.wc;
@@ -2115,7 +2116,7 @@
 	struct opa_smp *smp = (struct opa_smp *)recv->mad;
 
 	if (opa_smi_handle_dr_smp_recv(smp,
-				   port_priv->device->node_type,
+				   rdma_cap_ib_switch(port_priv->device),
 				   port_num,
 				   port_priv->device->phys_port_cnt) ==
 				   IB_SMI_DISCARD)
@@ -2127,7 +2128,7 @@
 
 	if (retsmi == IB_SMI_SEND) { /* don't forward */
 		if (opa_smi_handle_dr_smp_send(smp,
-					   port_priv->device->node_type,
+					   rdma_cap_ib_switch(port_priv->device),
 					   port_num) == IB_SMI_DISCARD)
 			return IB_SMI_DISCARD;
 
@@ -2135,7 +2136,7 @@
 		    IB_SMI_DISCARD)
 			return IB_SMI_DISCARD;
 
-	} else if (port_priv->device->node_type == RDMA_NODE_IB_SWITCH) {
+	} else if (rdma_cap_ib_switch(port_priv->device)) {
 		/* forward case for switches */
 		memcpy(response, recv, mad_priv_size(response));
 		response->header.recv_wc.wc = &response->header.wc;
@@ -2235,7 +2236,7 @@
 		goto out;
 	}
 
-	if (port_priv->device->node_type == RDMA_NODE_IB_SWITCH)
+	if (rdma_cap_ib_switch(port_priv->device))
 		port_num = wc->port_num;
 	else
 		port_num = port_priv->port_num;
@@ -3297,17 +3298,11 @@
 
 static void ib_mad_init_device(struct ib_device *device)
 {
-	int start, end, i;
+	int start, i;
 
-	if (device->node_type == RDMA_NODE_IB_SWITCH) {
-		start = 0;
-		end   = 0;
-	} else {
-		start = 1;
-		end   = device->phys_port_cnt;
-	}
+	start = rdma_start_port(device);
 
-	for (i = start; i <= end; i++) {
+	for (i = start; i <= rdma_end_port(device); i++) {
 		if (!rdma_cap_ib_mad(device, i))
 			continue;
 
@@ -3342,17 +3337,9 @@
 
 static void ib_mad_remove_device(struct ib_device *device)
 {
-	int start, end, i;
+	int i;
 
-	if (device->node_type == RDMA_NODE_IB_SWITCH) {
-		start = 0;
-		end   = 0;
-	} else {
-		start = 1;
-		end   = device->phys_port_cnt;
-	}
-
-	for (i = start; i <= end; i++) {
+	for (i = rdma_start_port(device); i <= rdma_end_port(device); i++) {
 		if (!rdma_cap_ib_mad(device, i))
 			continue;
 
diff --git a/drivers/infiniband/core/multicast.c b/drivers/infiniband/core/multicast.c
index 1244f02..2cb865c 100644
--- a/drivers/infiniband/core/multicast.c
+++ b/drivers/infiniband/core/multicast.c
@@ -812,12 +812,8 @@
 	if (!dev)
 		return;
 
-	if (device->node_type == RDMA_NODE_IB_SWITCH)
-		dev->start_port = dev->end_port = 0;
-	else {
-		dev->start_port = 1;
-		dev->end_port = device->phys_port_cnt;
-	}
+	dev->start_port = rdma_start_port(device);
+	dev->end_port = rdma_end_port(device);
 
 	for (i = 0; i <= dev->end_port - dev->start_port; i++) {
 		if (!rdma_cap_ib_mcast(device, dev->start_port + i))
diff --git a/drivers/infiniband/core/opa_smi.h b/drivers/infiniband/core/opa_smi.h
index 62d91bf..3bfab35 100644
--- a/drivers/infiniband/core/opa_smi.h
+++ b/drivers/infiniband/core/opa_smi.h
@@ -39,12 +39,12 @@
 
 #include "smi.h"
 
-enum smi_action opa_smi_handle_dr_smp_recv(struct opa_smp *smp, u8 node_type,
+enum smi_action opa_smi_handle_dr_smp_recv(struct opa_smp *smp, bool is_switch,
 				       int port_num, int phys_port_cnt);
 int opa_smi_get_fwd_port(struct opa_smp *smp);
 extern enum smi_forward_action opa_smi_check_forward_dr_smp(struct opa_smp *smp);
 extern enum smi_action opa_smi_handle_dr_smp_send(struct opa_smp *smp,
-					      u8 node_type, int port_num);
+					      bool is_switch, int port_num);
 
 /*
  * Return IB_SMI_HANDLE if the SMP should be handled by the local SMA/SM
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index 0fae850..ca919f4 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -1156,12 +1156,8 @@
 	int s, e, i;
 	int count = 0;
 
-	if (device->node_type == RDMA_NODE_IB_SWITCH)
-		s = e = 0;
-	else {
-		s = 1;
-		e = device->phys_port_cnt;
-	}
+	s = rdma_start_port(device);
+	e = rdma_end_port(device);
 
 	sa_dev = kzalloc(sizeof *sa_dev +
 			 (e - s + 1) * sizeof (struct ib_sa_port),
diff --git a/drivers/infiniband/core/smi.c b/drivers/infiniband/core/smi.c
index 368a561..f19b238 100644
--- a/drivers/infiniband/core/smi.c
+++ b/drivers/infiniband/core/smi.c
@@ -41,7 +41,7 @@
 #include "smi.h"
 #include "opa_smi.h"
 
-static enum smi_action __smi_handle_dr_smp_send(u8 node_type, int port_num,
+static enum smi_action __smi_handle_dr_smp_send(bool is_switch, int port_num,
 						u8 *hop_ptr, u8 hop_cnt,
 						const u8 *initial_path,
 						const u8 *return_path,
@@ -64,7 +64,7 @@
 
 		/* C14-9:2 */
 		if (*hop_ptr && *hop_ptr < hop_cnt) {
-			if (node_type != RDMA_NODE_IB_SWITCH)
+			if (!is_switch)
 				return IB_SMI_DISCARD;
 
 			/* return_path set when received */
@@ -77,7 +77,7 @@
 		if (*hop_ptr == hop_cnt) {
 			/* return_path set when received */
 			(*hop_ptr)++;
-			return (node_type == RDMA_NODE_IB_SWITCH ||
+			return (is_switch ||
 				dr_dlid_is_permissive ?
 				IB_SMI_HANDLE : IB_SMI_DISCARD);
 		}
@@ -96,7 +96,7 @@
 
 		/* C14-13:2 */
 		if (2 <= *hop_ptr && *hop_ptr <= hop_cnt) {
-			if (node_type != RDMA_NODE_IB_SWITCH)
+			if (!is_switch)
 				return IB_SMI_DISCARD;
 
 			(*hop_ptr)--;
@@ -108,7 +108,7 @@
 		if (*hop_ptr == 1) {
 			(*hop_ptr)--;
 			/* C14-13:3 -- SMPs destined for SM shouldn't be here */
-			return (node_type == RDMA_NODE_IB_SWITCH ||
+			return (is_switch ||
 				dr_slid_is_permissive ?
 				IB_SMI_HANDLE : IB_SMI_DISCARD);
 		}
@@ -127,9 +127,9 @@
  * Return IB_SMI_DISCARD if the SMP should be discarded
  */
 enum smi_action smi_handle_dr_smp_send(struct ib_smp *smp,
-				       u8 node_type, int port_num)
+				       bool is_switch, int port_num)
 {
-	return __smi_handle_dr_smp_send(node_type, port_num,
+	return __smi_handle_dr_smp_send(is_switch, port_num,
 					&smp->hop_ptr, smp->hop_cnt,
 					smp->initial_path,
 					smp->return_path,
@@ -139,9 +139,9 @@
 }
 
 enum smi_action opa_smi_handle_dr_smp_send(struct opa_smp *smp,
-				       u8 node_type, int port_num)
+				       bool is_switch, int port_num)
 {
-	return __smi_handle_dr_smp_send(node_type, port_num,
+	return __smi_handle_dr_smp_send(is_switch, port_num,
 					&smp->hop_ptr, smp->hop_cnt,
 					smp->route.dr.initial_path,
 					smp->route.dr.return_path,
@@ -152,7 +152,7 @@
 					OPA_LID_PERMISSIVE);
 }
 
-static enum smi_action __smi_handle_dr_smp_recv(u8 node_type, int port_num,
+static enum smi_action __smi_handle_dr_smp_recv(bool is_switch, int port_num,
 						int phys_port_cnt,
 						u8 *hop_ptr, u8 hop_cnt,
 						const u8 *initial_path,
@@ -173,7 +173,7 @@
 
 		/* C14-9:2 -- intermediate hop */
 		if (*hop_ptr && *hop_ptr < hop_cnt) {
-			if (node_type != RDMA_NODE_IB_SWITCH)
+			if (!is_switch)
 				return IB_SMI_DISCARD;
 
 			return_path[*hop_ptr] = port_num;
@@ -188,7 +188,7 @@
 				return_path[*hop_ptr] = port_num;
 			/* hop_ptr updated when sending */
 
-			return (node_type == RDMA_NODE_IB_SWITCH ||
+			return (is_switch ||
 				dr_dlid_is_permissive ?
 				IB_SMI_HANDLE : IB_SMI_DISCARD);
 		}
@@ -208,7 +208,7 @@
 
 		/* C14-13:2 */
 		if (2 <= *hop_ptr && *hop_ptr <= hop_cnt) {
-			if (node_type != RDMA_NODE_IB_SWITCH)
+			if (!is_switch)
 				return IB_SMI_DISCARD;
 
 			/* hop_ptr updated when sending */
@@ -224,8 +224,7 @@
 				return IB_SMI_HANDLE;
 			}
 			/* hop_ptr updated when sending */
-			return (node_type == RDMA_NODE_IB_SWITCH ?
-				IB_SMI_HANDLE : IB_SMI_DISCARD);
+			return (is_switch ? IB_SMI_HANDLE : IB_SMI_DISCARD);
 		}
 
 		/* C14-13:4 -- hop_ptr = 0 -> give to SM */
@@ -238,10 +237,10 @@
  * Adjust information for a received SMP
  * Return IB_SMI_DISCARD if the SMP should be dropped
  */
-enum smi_action smi_handle_dr_smp_recv(struct ib_smp *smp, u8 node_type,
+enum smi_action smi_handle_dr_smp_recv(struct ib_smp *smp, bool is_switch,
 				       int port_num, int phys_port_cnt)
 {
-	return __smi_handle_dr_smp_recv(node_type, port_num, phys_port_cnt,
+	return __smi_handle_dr_smp_recv(is_switch, port_num, phys_port_cnt,
 					&smp->hop_ptr, smp->hop_cnt,
 					smp->initial_path,
 					smp->return_path,
@@ -254,10 +253,10 @@
  * Adjust information for a received SMP
  * Return IB_SMI_DISCARD if the SMP should be dropped
  */
-enum smi_action opa_smi_handle_dr_smp_recv(struct opa_smp *smp, u8 node_type,
+enum smi_action opa_smi_handle_dr_smp_recv(struct opa_smp *smp, bool is_switch,
 					   int port_num, int phys_port_cnt)
 {
-	return __smi_handle_dr_smp_recv(node_type, port_num, phys_port_cnt,
+	return __smi_handle_dr_smp_recv(is_switch, port_num, phys_port_cnt,
 					&smp->hop_ptr, smp->hop_cnt,
 					smp->route.dr.initial_path,
 					smp->route.dr.return_path,
diff --git a/drivers/infiniband/core/smi.h b/drivers/infiniband/core/smi.h
index aff96ba..33c91c8 100644
--- a/drivers/infiniband/core/smi.h
+++ b/drivers/infiniband/core/smi.h
@@ -51,12 +51,12 @@
 	IB_SMI_FORWARD	/* SMP should be forwarded (for switches only) */
 };
 
-enum smi_action smi_handle_dr_smp_recv(struct ib_smp *smp, u8 node_type,
+enum smi_action smi_handle_dr_smp_recv(struct ib_smp *smp, bool is_switch,
 				       int port_num, int phys_port_cnt);
 int smi_get_fwd_port(struct ib_smp *smp);
 extern enum smi_forward_action smi_check_forward_dr_smp(struct ib_smp *smp);
 extern enum smi_action smi_handle_dr_smp_send(struct ib_smp *smp,
-					      u8 node_type, int port_num);
+					      bool is_switch, int port_num);
 
 /*
  * Return IB_SMI_HANDLE if the SMP should be handled by the local SMA/SM
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index ed6b6c8..0b84a9c 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -870,7 +870,7 @@
 		goto err_put;
 	}
 
-	if (device->node_type == RDMA_NODE_IB_SWITCH) {
+	if (rdma_cap_ib_switch(device)) {
 		ret = add_port(device, 0, port_callback);
 		if (ret)
 			goto err_put;
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 62c24b1..0094810 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -1193,6 +1193,7 @@
 	return 0;
 }
 
+static DECLARE_BITMAP(overflow_map, IB_UCM_MAX_DEVICES);
 static void ib_ucm_release_dev(struct device *dev)
 {
 	struct ib_ucm_device *ucm_dev;
@@ -1202,7 +1203,7 @@
 	if (ucm_dev->devnum < IB_UCM_MAX_DEVICES)
 		clear_bit(ucm_dev->devnum, dev_map);
 	else
-		clear_bit(ucm_dev->devnum - IB_UCM_MAX_DEVICES, dev_map);
+		clear_bit(ucm_dev->devnum - IB_UCM_MAX_DEVICES, overflow_map);
 	kfree(ucm_dev);
 }
 
@@ -1226,7 +1227,6 @@
 static DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL);
 
 static dev_t overflow_maj;
-static DECLARE_BITMAP(overflow_map, IB_UCM_MAX_DEVICES);
 static int find_overflow_devnum(void)
 {
 	int ret;
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index ad45469..29b2121 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -1354,10 +1354,10 @@
 	/* Acquire mutex's based on pointer comparison to prevent deadlock. */
 	if (file1 < file2) {
 		mutex_lock(&file1->mut);
-		mutex_lock(&file2->mut);
+		mutex_lock_nested(&file2->mut, SINGLE_DEPTH_NESTING);
 	} else {
 		mutex_lock(&file2->mut);
-		mutex_lock(&file1->mut);
+		mutex_lock_nested(&file1->mut, SINGLE_DEPTH_NESTING);
 	}
 }
 
@@ -1616,6 +1616,7 @@
 	device_remove_file(ucma_misc.this_device, &dev_attr_abi_version);
 	misc_deregister(&ucma_misc);
 	idr_destroy(&ctx_idr);
+	idr_destroy(&multicast_idr);
 }
 
 module_init(ucma_init);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index b1b7323..bbbe018 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -736,6 +736,10 @@
 	/*
 	 * T3 only supports 32 bits of size.
 	 */
+	if (sizeof(phys_addr_t) > 4) {
+		pr_warn_once(MOD "Cannot support dma_mrs on this platform.\n");
+		return ERR_PTR(-ENOTSUPP);
+	}
 	bl.size = 0xffffffff;
 	bl.addr = 0;
 	kva = 0;
diff --git a/drivers/infiniband/hw/ehca/ehca_sqp.c b/drivers/infiniband/hw/ehca/ehca_sqp.c
index 12b5bc2..376b031 100644
--- a/drivers/infiniband/hw/ehca/ehca_sqp.c
+++ b/drivers/infiniband/hw/ehca/ehca_sqp.c
@@ -226,8 +226,9 @@
 	const struct ib_mad *in_mad = (const struct ib_mad *)in;
 	struct ib_mad *out_mad = (struct ib_mad *)out;
 
-	BUG_ON(in_mad_size != sizeof(*in_mad) ||
-	       *out_mad_size != sizeof(*out_mad));
+	if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
+			 *out_mad_size != sizeof(*out_mad)))
+		return IB_MAD_RESULT_FAILURE;
 
 	if (!port_num || port_num > ibdev->phys_port_cnt || !in_wc)
 		return IB_MAD_RESULT_FAILURE;
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 2d7e503..871dbe5 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -31,6 +31,8 @@
  * SOFTWARE.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/idr.h>
@@ -399,8 +401,8 @@
 	u32 bar0 = 0, bar1 = 0;
 
 #ifdef CONFIG_X86_64
-	if (WARN(pat_enabled(),
-		 "ipath needs PAT disabled, boot with nopat kernel parameter\n")) {
+	if (pat_enabled()) {
+		pr_warn("ipath needs PAT disabled, boot with nopat kernel parameter\n");
 		ret = -ENODEV;
 		goto bail;
 	}
diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c
index 948188e..ad3a926 100644
--- a/drivers/infiniband/hw/ipath/ipath_mad.c
+++ b/drivers/infiniband/hw/ipath/ipath_mad.c
@@ -1499,8 +1499,9 @@
 	const struct ib_mad *in_mad = (const struct ib_mad *)in;
 	struct ib_mad *out_mad = (struct ib_mad *)out;
 
-	BUG_ON(in_mad_size != sizeof(*in_mad) ||
-	       *out_mad_size != sizeof(*out_mad));
+	if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
+			 *out_mad_size != sizeof(*out_mad)))
+		return IB_MAD_RESULT_FAILURE;
 
 	switch (in_mad->mad_hdr.mgmt_class) {
 	case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE:
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index 48253b8..30ba49c 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -2044,9 +2044,9 @@
 
 	spin_lock_init(&idev->qp_table.lock);
 	spin_lock_init(&idev->lk_table.lock);
-	idev->sm_lid = __constant_be16_to_cpu(IB_LID_PERMISSIVE);
+	idev->sm_lid = be16_to_cpu(IB_LID_PERMISSIVE);
 	/* Set the prefix to the default value (see ch. 4.1.1) */
-	idev->gid_prefix = __constant_cpu_to_be64(0xfe80000000000000ULL);
+	idev->gid_prefix = cpu_to_be64(0xfe80000000000000ULL);
 
 	ret = ipath_init_qp_table(idev, ib_ipath_qp_table_size);
 	if (ret)
diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
index 85a50df..68b3dfa 100644
--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -860,21 +860,31 @@
 	struct mlx4_ib_dev *dev = to_mdev(ibdev);
 	const struct ib_mad *in_mad = (const struct ib_mad *)in;
 	struct ib_mad *out_mad = (struct ib_mad *)out;
+	enum rdma_link_layer link = rdma_port_get_link_layer(ibdev, port_num);
 
-	BUG_ON(in_mad_size != sizeof(*in_mad) ||
-	       *out_mad_size != sizeof(*out_mad));
+	if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
+			 *out_mad_size != sizeof(*out_mad)))
+		return IB_MAD_RESULT_FAILURE;
 
-	switch (rdma_port_get_link_layer(ibdev, port_num)) {
-	case IB_LINK_LAYER_INFINIBAND:
-		if (!mlx4_is_slave(dev->dev))
-			return ib_process_mad(ibdev, mad_flags, port_num, in_wc,
-					      in_grh, in_mad, out_mad);
-	case IB_LINK_LAYER_ETHERNET:
-		return iboe_process_mad(ibdev, mad_flags, port_num, in_wc,
-					  in_grh, in_mad, out_mad);
-	default:
-		return -EINVAL;
+	/* iboe_process_mad() which uses the HCA flow-counters to implement IB PMA
+	 * queries, should be called only by VFs and for that specific purpose
+	 */
+	if (link == IB_LINK_LAYER_INFINIBAND) {
+		if (mlx4_is_slave(dev->dev) &&
+		    in_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT &&
+		    in_mad->mad_hdr.attr_id == IB_PMA_PORT_COUNTERS)
+			return iboe_process_mad(ibdev, mad_flags, port_num, in_wc,
+						in_grh, in_mad, out_mad);
+
+		return ib_process_mad(ibdev, mad_flags, port_num, in_wc,
+				      in_grh, in_mad, out_mad);
 	}
+
+	if (link == IB_LINK_LAYER_ETHERNET)
+		return iboe_process_mad(ibdev, mad_flags, port_num, in_wc,
+					in_grh, in_mad, out_mad);
+
+	return -EINVAL;
 }
 
 static void send_handler(struct ib_mad_agent *agent,
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 067a691..8be6db8 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -253,14 +253,15 @@
 	props->hca_core_clock = dev->dev->caps.hca_core_clock * 1000UL;
 	props->timestamp_mask = 0xFFFFFFFFFFFFULL;
 
-	err = mlx4_get_internal_clock_params(dev->dev, &clock_params);
-	if (err)
-		goto out;
+	if (!mlx4_is_slave(dev->dev))
+		err = mlx4_get_internal_clock_params(dev->dev, &clock_params);
 
 	if (uhw->outlen >= resp.response_length + sizeof(resp.hca_core_clock_offset)) {
-		resp.hca_core_clock_offset = clock_params.offset % PAGE_SIZE;
 		resp.response_length += sizeof(resp.hca_core_clock_offset);
-		resp.comp_mask |= QUERY_DEVICE_RESP_MASK_TIMESTAMP;
+		if (!err && !mlx4_is_slave(dev->dev)) {
+			resp.comp_mask |= QUERY_DEVICE_RESP_MASK_TIMESTAMP;
+			resp.hca_core_clock_offset = clock_params.offset % PAGE_SIZE;
+		}
 	}
 
 	if (uhw->outlen) {
@@ -2669,31 +2670,33 @@
 	dm = kcalloc(ports, sizeof(*dm), GFP_ATOMIC);
 	if (!dm) {
 		pr_err("failed to allocate memory for tunneling qp update\n");
-		goto out;
+		return;
 	}
 
 	for (i = 0; i < ports; i++) {
 		dm[i] = kmalloc(sizeof (struct mlx4_ib_demux_work), GFP_ATOMIC);
 		if (!dm[i]) {
 			pr_err("failed to allocate memory for tunneling qp update work struct\n");
-			for (i = 0; i < dev->caps.num_ports; i++) {
-				if (dm[i])
-					kfree(dm[i]);
-			}
+			while (--i >= 0)
+				kfree(dm[i]);
 			goto out;
 		}
-	}
-	/* initialize or tear down tunnel QPs for the slave */
-	for (i = 0; i < ports; i++) {
 		INIT_WORK(&dm[i]->work, mlx4_ib_tunnels_update_work);
 		dm[i]->port = first_port + i + 1;
 		dm[i]->slave = slave;
 		dm[i]->do_init = do_init;
 		dm[i]->dev = ibdev;
-		spin_lock_irqsave(&ibdev->sriov.going_down_lock, flags);
-		if (!ibdev->sriov.is_going_down)
+	}
+	/* initialize or tear down tunnel QPs for the slave */
+	spin_lock_irqsave(&ibdev->sriov.going_down_lock, flags);
+	if (!ibdev->sriov.is_going_down) {
+		for (i = 0; i < ports; i++)
 			queue_work(ibdev->sriov.demux[i].ud_wq, &dm[i]->work);
 		spin_unlock_irqrestore(&ibdev->sriov.going_down_lock, flags);
+	} else {
+		spin_unlock_irqrestore(&ibdev->sriov.going_down_lock, flags);
+		for (i = 0; i < ports; i++)
+			kfree(dm[i]);
 	}
 out:
 	kfree(dm);
diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c
index 01fc97d..b84d13a 100644
--- a/drivers/infiniband/hw/mlx5/mad.c
+++ b/drivers/infiniband/hw/mlx5/mad.c
@@ -68,8 +68,9 @@
 	const struct ib_mad *in_mad = (const struct ib_mad *)in;
 	struct ib_mad *out_mad = (struct ib_mad *)out;
 
-	BUG_ON(in_mad_size != sizeof(*in_mad) ||
-	       *out_mad_size != sizeof(*out_mad));
+	if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
+			 *out_mad_size != sizeof(*out_mad)))
+		return IB_MAD_RESULT_FAILURE;
 
 	slid = in_wc ? in_wc->slid : be16_to_cpu(IB_LID_PERMISSIVE);
 
diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c
index 6b2418b..7c3f2fb 100644
--- a/drivers/infiniband/hw/mthca/mthca_mad.c
+++ b/drivers/infiniband/hw/mthca/mthca_mad.c
@@ -209,8 +209,9 @@
 	const struct ib_mad *in_mad = (const struct ib_mad *)in;
 	struct ib_mad *out_mad = (struct ib_mad *)out;
 
-	BUG_ON(in_mad_size != sizeof(*in_mad) ||
-	       *out_mad_size != sizeof(*out_mad));
+	if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
+			 *out_mad_size != sizeof(*out_mad)))
+		return IB_MAD_RESULT_FAILURE;
 
 	/* Forward locally generated traps to the SM */
 	if (in_mad->mad_hdr.method == IB_MGMT_METHOD_TRAP &&
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 9047af4..8a3ad17 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1520,8 +1520,9 @@
 	int rc = arpindex;
 	struct net_device *netdev;
 	struct nes_adapter *nesadapter = nesvnic->nesdev->nesadapter;
+	__be32 dst_ipaddr = htonl(dst_ip);
 
-	rt = ip_route_output(&init_net, htonl(dst_ip), 0, 0, 0);
+	rt = ip_route_output(&init_net, dst_ipaddr, nesvnic->local_ipaddr, 0, 0);
 	if (IS_ERR(rt)) {
 		printk(KERN_ERR "%s: ip_route_output_key failed for 0x%08X\n",
 		       __func__, dst_ip);
@@ -1533,7 +1534,7 @@
 	else
 		netdev = nesvnic->netdev;
 
-	neigh = neigh_lookup(&arp_tbl, &rt->rt_gateway, netdev);
+	neigh = dst_neigh_lookup(&rt->dst, &dst_ipaddr);
 
 	rcu_read_lock();
 	if (neigh) {
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 02120d3..4713dd7 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -3861,7 +3861,7 @@
 				(((u32)mac_addr[2]) << 24) | (((u32)mac_addr[3]) << 16) |
 				(((u32)mac_addr[4]) << 8)  | (u32)mac_addr[5]);
 		cqp_wqe->wqe_words[NES_CQP_ARP_WQE_MAC_HIGH_IDX] = cpu_to_le32(
-				(((u32)mac_addr[0]) << 16) | (u32)mac_addr[1]);
+				(((u32)mac_addr[0]) << 8) | (u32)mac_addr[1]);
 	} else {
 		cqp_wqe->wqe_words[NES_CQP_ARP_WQE_MAC_ADDR_LOW_IDX] = 0;
 		cqp_wqe->wqe_words[NES_CQP_ARP_WQE_MAC_HIGH_IDX] = 0;
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma.h b/drivers/infiniband/hw/ocrdma/ocrdma.h
index b396344..6a36338 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma.h
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #ifndef __OCRDMA_H__
 #define __OCRDMA_H__
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_abi.h b/drivers/infiniband/hw/ocrdma/ocrdma_abi.h
index 1554cca..430b135 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_abi.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_abi.h
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #ifndef __OCRDMA_ABI_H__
 #define __OCRDMA_ABI_H__
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c
index 4bafa15..44766fe 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_ah.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_ah.c
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #include <net/neighbour.h>
 #include <net/netevent.h>
@@ -215,8 +230,9 @@
 	const struct ib_mad *in_mad = (const struct ib_mad *)in;
 	struct ib_mad *out_mad = (struct ib_mad *)out;
 
-	BUG_ON(in_mad_size != sizeof(*in_mad) ||
-	       *out_mad_size != sizeof(*out_mad));
+	if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
+			 *out_mad_size != sizeof(*out_mad)))
+		return IB_MAD_RESULT_FAILURE;
 
 	switch (in_mad->mad_hdr.mgmt_class) {
 	case IB_MGMT_CLASS_PERF_MGMT:
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_ah.h b/drivers/infiniband/hw/ocrdma/ocrdma_ah.h
index cf366fe..04a30ae 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_ah.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_ah.h
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #ifndef __OCRDMA_AH_H__
 #define __OCRDMA_AH_H__
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
index 47615ff..aab391a 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) CNA Adapters.              *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #include <linux/sched.h>
 #include <linux/interrupt.h>
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.h b/drivers/infiniband/hw/ocrdma/ocrdma_hw.h
index e905972..7ed885c 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.h
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) CNA Adapters.              *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #ifndef __OCRDMA_HW_H__
 #define __OCRDMA_HW_H__
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
index 8a1398b..b119a34 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #include <linux/module.h>
 #include <linux/idr.h>
@@ -46,7 +61,7 @@
 MODULE_VERSION(OCRDMA_ROCE_DRV_VERSION);
 MODULE_DESCRIPTION(OCRDMA_ROCE_DRV_DESC " " OCRDMA_ROCE_DRV_VERSION);
 MODULE_AUTHOR("Emulex Corporation");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("Dual BSD/GPL");
 
 static LIST_HEAD(ocrdma_dev_list);
 static DEFINE_SPINLOCK(ocrdma_devlist_lock);
@@ -696,6 +711,7 @@
 	ocrdma_unregister_inet6addr_notifier();
 	ocrdma_unregister_inetaddr_notifier();
 	ocrdma_rem_debugfs();
+	idr_destroy(&ocrdma_dev_id);
 }
 
 module_init(ocrdma_init_module);
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h
index 02ad0ae..80006b2 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #ifndef __OCRDMA_SLI_H__
 #define __OCRDMA_SLI_H__
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
index 48d7ef5..69334e2 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2014 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #include <rdma/ib_addr.h>
 #include <rdma/ib_pma.h>
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_stats.h b/drivers/infiniband/hw/ocrdma/ocrdma_stats.h
index 091edd6..c9e58d0 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_stats.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_stats.h
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2014 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #ifndef __OCRDMA_STATS_H__
 #define __OCRDMA_STATS_H__
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
index 5bb61eb..bc84cd4 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #include <linux/dma-mapping.h>
 #include <rdma/ib_verbs.h>
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.h b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.h
index b15c608..eaccb2d 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.h
@@ -1,21 +1,36 @@
-/*******************************************************************
- * This file is part of the Emulex RoCE Device Driver for          *
- * RoCE (RDMA over Converged Ethernet) adapters.                   *
- * Copyright (C) 2008-2012 Emulex. All rights reserved.            *
- * EMULEX and SLI are trademarks of Emulex.                        *
- * www.emulex.com                                                  *
- *                                                                 *
- * This program is free software; you can redistribute it and/or   *
- * modify it under the terms of version 2 of the GNU General       *
- * Public License as published by the Free Software Foundation.    *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
- * more details, a copy of which can be found in the file COPYING  *
- * included with this package.                                     *
+/* This file is part of the Emulex RoCE Device Driver for
+ * RoCE (RDMA over Converged Ethernet) adapters.
+ * Copyright (C) 2012-2015 Emulex. All rights reserved.
+ * EMULEX and SLI are trademarks of Emulex.
+ * www.emulex.com
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License (GPL) Version 2, available from the file COPYING in the main
+ * directory of this source tree, or the BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Contact Information:
  * linux-drivers@emulex.com
@@ -23,7 +38,7 @@
  * Emulex
  * 3333 Susan Street
  * Costa Mesa, CA 92626
- *******************************************************************/
+ */
 
 #ifndef __OCRDMA_VERBS_H__
 #define __OCRDMA_VERBS_H__
diff --git a/drivers/infiniband/hw/qib/qib_mad.c b/drivers/infiniband/hw/qib/qib_mad.c
index 05e3242..9625e7c 100644
--- a/drivers/infiniband/hw/qib/qib_mad.c
+++ b/drivers/infiniband/hw/qib/qib_mad.c
@@ -2412,8 +2412,9 @@
 	const struct ib_mad *in_mad = (const struct ib_mad *)in;
 	struct ib_mad *out_mad = (struct ib_mad *)out;
 
-	BUG_ON(in_mad_size != sizeof(*in_mad) ||
-	       *out_mad_size != sizeof(*out_mad));
+	if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
+			 *out_mad_size != sizeof(*out_mad)))
+		return IB_MAD_RESULT_FAILURE;
 
 	switch (in_mad->mad_hdr.mgmt_class) {
 	case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE:
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index bd94b0a..79859c4 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -239,7 +239,7 @@
 	struct net_device   *dev;
 	struct ipoib_neigh  *neigh;
 	struct ipoib_path   *path;
-	struct ipoib_cm_tx_buf *tx_ring;
+	struct ipoib_tx_buf *tx_ring;
 	unsigned	     tx_head;
 	unsigned	     tx_tail;
 	unsigned long	     flags;
@@ -504,6 +504,33 @@
 void ipoib_mcast_dev_down(struct net_device *dev);
 void ipoib_mcast_dev_flush(struct net_device *dev);
 
+int ipoib_dma_map_tx(struct ib_device *ca, struct ipoib_tx_buf *tx_req);
+void ipoib_dma_unmap_tx(struct ipoib_dev_priv *priv,
+			struct ipoib_tx_buf *tx_req);
+
+static inline void ipoib_build_sge(struct ipoib_dev_priv *priv,
+				   struct ipoib_tx_buf *tx_req)
+{
+	int i, off;
+	struct sk_buff *skb = tx_req->skb;
+	skb_frag_t *frags = skb_shinfo(skb)->frags;
+	int nr_frags = skb_shinfo(skb)->nr_frags;
+	u64 *mapping = tx_req->mapping;
+
+	if (skb_headlen(skb)) {
+		priv->tx_sge[0].addr         = mapping[0];
+		priv->tx_sge[0].length       = skb_headlen(skb);
+		off = 1;
+	} else
+		off = 0;
+
+	for (i = 0; i < nr_frags; ++i) {
+		priv->tx_sge[i + off].addr = mapping[i + off];
+		priv->tx_sge[i + off].length = skb_frag_size(&frags[i]);
+	}
+	priv->tx_wr.num_sge	     = nr_frags + off;
+}
+
 #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG
 struct ipoib_mcast_iter *ipoib_mcast_iter_init(struct net_device *dev);
 int ipoib_mcast_iter_next(struct ipoib_mcast_iter *iter);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index cf32a778..ee39be6 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -694,14 +694,12 @@
 static inline int post_send(struct ipoib_dev_priv *priv,
 			    struct ipoib_cm_tx *tx,
 			    unsigned int wr_id,
-			    u64 addr, int len)
+			    struct ipoib_tx_buf *tx_req)
 {
 	struct ib_send_wr *bad_wr;
 
-	priv->tx_sge[0].addr          = addr;
-	priv->tx_sge[0].length        = len;
+	ipoib_build_sge(priv, tx_req);
 
-	priv->tx_wr.num_sge	= 1;
 	priv->tx_wr.wr_id	= wr_id | IPOIB_OP_CM;
 
 	return ib_post_send(tx->qp, &priv->tx_wr, &bad_wr);
@@ -710,8 +708,7 @@
 void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
-	struct ipoib_cm_tx_buf *tx_req;
-	u64 addr;
+	struct ipoib_tx_buf *tx_req;
 	int rc;
 
 	if (unlikely(skb->len > tx->mtu)) {
@@ -735,24 +732,21 @@
 	 */
 	tx_req = &tx->tx_ring[tx->tx_head & (ipoib_sendq_size - 1)];
 	tx_req->skb = skb;
-	addr = ib_dma_map_single(priv->ca, skb->data, skb->len, DMA_TO_DEVICE);
-	if (unlikely(ib_dma_mapping_error(priv->ca, addr))) {
+
+	if (unlikely(ipoib_dma_map_tx(priv->ca, tx_req))) {
 		++dev->stats.tx_errors;
 		dev_kfree_skb_any(skb);
 		return;
 	}
 
-	tx_req->mapping = addr;
-
 	skb_orphan(skb);
 	skb_dst_drop(skb);
 
-	rc = post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1),
-		       addr, skb->len);
+	rc = post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1), tx_req);
 	if (unlikely(rc)) {
 		ipoib_warn(priv, "post_send failed, error %d\n", rc);
 		++dev->stats.tx_errors;
-		ib_dma_unmap_single(priv->ca, addr, skb->len, DMA_TO_DEVICE);
+		ipoib_dma_unmap_tx(priv, tx_req);
 		dev_kfree_skb_any(skb);
 	} else {
 		dev->trans_start = jiffies;
@@ -777,7 +771,7 @@
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_cm_tx *tx = wc->qp->qp_context;
 	unsigned int wr_id = wc->wr_id & ~IPOIB_OP_CM;
-	struct ipoib_cm_tx_buf *tx_req;
+	struct ipoib_tx_buf *tx_req;
 	unsigned long flags;
 
 	ipoib_dbg_data(priv, "cm send completion: id %d, status: %d\n",
@@ -791,7 +785,7 @@
 
 	tx_req = &tx->tx_ring[wr_id];
 
-	ib_dma_unmap_single(priv->ca, tx_req->mapping, tx_req->skb->len, DMA_TO_DEVICE);
+	ipoib_dma_unmap_tx(priv, tx_req);
 
 	/* FIXME: is this right? Shouldn't we only increment on success? */
 	++dev->stats.tx_packets;
@@ -1036,6 +1030,9 @@
 
 	struct ib_qp *tx_qp;
 
+	if (dev->features & NETIF_F_SG)
+		attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
+
 	tx_qp = ib_create_qp(priv->pd, &attr);
 	if (PTR_ERR(tx_qp) == -EINVAL) {
 		ipoib_warn(priv, "can't use GFP_NOIO for QPs on device %s, using GFP_KERNEL\n",
@@ -1170,7 +1167,7 @@
 static void ipoib_cm_tx_destroy(struct ipoib_cm_tx *p)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(p->dev);
-	struct ipoib_cm_tx_buf *tx_req;
+	struct ipoib_tx_buf *tx_req;
 	unsigned long begin;
 
 	ipoib_dbg(priv, "Destroy active connection 0x%x head 0x%x tail 0x%x\n",
@@ -1197,8 +1194,7 @@
 
 	while ((int) p->tx_tail - (int) p->tx_head < 0) {
 		tx_req = &p->tx_ring[p->tx_tail & (ipoib_sendq_size - 1)];
-		ib_dma_unmap_single(priv->ca, tx_req->mapping, tx_req->skb->len,
-				    DMA_TO_DEVICE);
+		ipoib_dma_unmap_tx(priv, tx_req);
 		dev_kfree_skb_any(tx_req->skb);
 		++p->tx_tail;
 		netif_tx_lock_bh(p->dev);
@@ -1455,7 +1451,6 @@
 	spin_unlock_irq(&priv->lock);
 }
 
-
 static ssize_t show_mode(struct device *d, struct device_attribute *attr,
 			 char *buf)
 {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 63b92cb..d266667 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -263,8 +263,7 @@
 			   "for buf %d\n", wr_id);
 }
 
-static int ipoib_dma_map_tx(struct ib_device *ca,
-			    struct ipoib_tx_buf *tx_req)
+int ipoib_dma_map_tx(struct ib_device *ca, struct ipoib_tx_buf *tx_req)
 {
 	struct sk_buff *skb = tx_req->skb;
 	u64 *mapping = tx_req->mapping;
@@ -305,8 +304,8 @@
 	return -EIO;
 }