Merge tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates from Thomas Gleixner:
"A small set of updates for x86:
- Return -EIO instead of success when the certificate buffer for SEV
guests is not large enough
- Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared
on return to userspace for performance reasons, but the leaves user
space vulnerable to cross-thread attacks which STIBP prevents.
Update the documentation accordingly"
* tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt/sev-guest: Return -EIO if certificate buffer is not large enough
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
x86/speculation: Allow enabling STIBP with legacy IBRS
diff --git a/.clang-format b/.clang-format
index b628364..2c61b45 100644
--- a/.clang-format
+++ b/.clang-format
@@ -190,6 +190,7 @@
- 'for_each_active_dev_scope'
- 'for_each_active_drhd_unit'
- 'for_each_active_iommu'
+ - 'for_each_active_route'
- 'for_each_aggr_pgid'
- 'for_each_available_child_of_node'
- 'for_each_bench'
diff --git a/.gitattributes b/.gitattributes
index 4b32eaa..c9ba5bf 100644
--- a/.gitattributes
+++ b/.gitattributes
@@ -1,4 +1,4 @@
-*.c diff=cpp
-*.h diff=cpp
-*.dtsi diff=dts
-*.dts diff=dts
+# SPDX-License-Identifier: GPL-2.0-only
+*.[ch] diff=cpp
+*.dts diff=dts
+*.dts[io] diff=dts
diff --git a/.gitignore b/.gitignore
index 20dce5c..8fe465f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -4,7 +4,7 @@
# subdirectories here. Add them in the ".gitignore" file
# in that subdirectory instead.
#
-# NOTE! Please use 'git ls-files -i --exclude-standard'
+# NOTE! Please use 'git ls-files -i -c --exclude-per-directory=.gitignore'
# command after changing this file, to see if there are
# any tracked files which get ignored after the change.
#
@@ -16,6 +16,7 @@
*.bin
*.bz2
*.c.[012]*.*
+*.cover
*.dt.yaml
*.dtb
*.dtbo
@@ -33,6 +34,7 @@
*.lz4
*.lzma
*.lzo
+*.mbx
*.mod
*.mod.c
*.o
diff --git a/.mailmap b/.mailmap
index a872c96..5367faa 100644
--- a/.mailmap
+++ b/.mailmap
@@ -121,6 +121,7 @@
Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@imgtec.com>
Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@mips.com>
<dev.kurt@vandijck-laurijssen.be> <kurt.van.dijck@eia.be>
+Dikshita Agarwal <dikshita@qti.qualcomm.com> <dikshita@codeaurora.org>
Dmitry Baryshkov <dbaryshkov@gmail.com>
Dmitry Baryshkov <dbaryshkov@gmail.com> <[dbaryshkov@gmail.com]>
Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_baryshkov@mentor.com>
@@ -150,6 +151,7 @@
Gao Xiang <xiang@kernel.org> <hsiangkao@aol.com>
Gao Xiang <xiang@kernel.org> <hsiangkao@linux.alibaba.com>
Gao Xiang <xiang@kernel.org> <hsiangkao@redhat.com>
+Georgi Djakov <djakov@kernel.org> <georgi.djakov@linaro.org>
Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>
Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@linux.vnet.ibm.com>
@@ -441,6 +443,7 @@
Vasily Averin <vasily.averin@linux.dev> <vvs@parallels.com>
Vasily Averin <vasily.averin@linux.dev> <vvs@sw.ru>
Valentin Schneider <vschneid@redhat.com> <valentin.schneider@arm.com>
+Vikash Garodia <quic_vgarodia@quicinc.com> <vgarodia@codeaurora.org>
Vinod Koul <vkoul@kernel.org> <vinod.koul@intel.com>
Vinod Koul <vkoul@kernel.org> <vinod.koul@linux.intel.com>
Vinod Koul <vkoul@kernel.org> <vkoul@infradead.org>
diff --git a/CREDITS b/CREDITS
index 5f5d70c..8470591 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1852,11 +1852,11 @@
D: fbdev hacking
N: Jesper Juhl
-E: jj@chaosbits.net
+E: jesperjuhl76@gmail.com
D: Various fixes, cleanups and minor features all over the tree.
D: Wrote initial version of the hdaps driver (since passed on to others).
-S: Lemnosvej 1, 3.tv
-S: 2300 Copenhagen S.
+S: Titangade 5G, 2.tv
+S: 2200 Copenhagen N.
S: Denmark
N: Jozsef Kadlecsik
diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
index 8db67aa..402af4b 100644
--- a/Documentation/ABI/stable/sysfs-devices-node
+++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -182,3 +182,42 @@
Contact: Jarkko Sakkinen <jarkko@kernel.org>
Description:
The total amount of SGX physical memory in bytes.
+
+What: /sys/devices/system/node/nodeX/memory_failure/total
+Date: January 2023
+Contact: Jiaqi Yan <jiaqiyan@google.com>
+Description:
+ The total number of raw poisoned pages (pages containing
+ corrupted data due to memory errors) on a NUMA node.
+
+What: /sys/devices/system/node/nodeX/memory_failure/ignored
+Date: January 2023
+Contact: Jiaqi Yan <jiaqiyan@google.com>
+Description:
+ Of the raw poisoned pages on a NUMA node, how many pages are
+ ignored by memory error recovery attempt, usually because
+ support for this type of pages is unavailable, and kernel
+ gives up the recovery.
+
+What: /sys/devices/system/node/nodeX/memory_failure/failed
+Date: January 2023
+Contact: Jiaqi Yan <jiaqiyan@google.com>
+Description:
+ Of the raw poisoned pages on a NUMA node, how many pages are
+ failed by memory error recovery attempt. This usually means
+ a key recovery operation failed.
+
+What: /sys/devices/system/node/nodeX/memory_failure/delayed
+Date: January 2023
+Contact: Jiaqi Yan <jiaqiyan@google.com>
+Description:
+ Of the raw poisoned pages on a NUMA node, how many pages are
+ delayed by memory error recovery attempt. Delayed poisoned
+ pages usually will be retried by kernel.
+
+What: /sys/devices/system/node/nodeX/memory_failure/recovered
+Date: January 2023
+Contact: Jiaqi Yan <jiaqiyan@google.com>
+Description:
+ Of the raw poisoned pages on a NUMA node, how many pages are
+ recovered by memory error recovery attempt.
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index af0cbf1..6095390 100644
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -522,7 +522,6 @@
The files are write only.
-
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready
Date: July 2022
KernelVersion: 5.20
@@ -542,3 +541,124 @@
The purpose is to expose some minor BOM changes for the same system SKU.
The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_pwr_converter_fail
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows the system reset cause due to power converter
+ devices failure.
+ Value 1 in file means this is reset cause, 0 - otherwise.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_ap_reset
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_ap_reset
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files aim to monitor the status of the External Root of Trust (EROT)
+ processor's RESET output to the Application Processor (AP).
+ By reading this file, could be determined if the EROT has invalidated or
+ revoked AP Firmware, at which point it will hold the AP in RESET until a
+ valid firmware is loaded. This protects the AP from running an
+ unauthorized firmware. In the normal flow, the AP reset should be released
+ after the EROT validates the integrity of the FW, and it should be done so
+ as quickly as possible so that the AP boots before the CPU starts to
+ communicate to each ASIC.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_recovery
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_recovery
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_reset
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_reset
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files aim to perform External Root of Trust (EROT) recovery
+ sequence after EROT device failure.
+ These EROT devices protect ASICs from unauthorized access and in normal
+ flow their reset should be released with system power – earliest power
+ up stage, so that EROTs can begin boot and authentication process before
+ CPU starts to communicate to ASICs.
+ Issuing a reset to the EROT while asserting the recovery signal will cause
+ the EROT Application Processor to enter recovery mode so that the EROT FW
+ can be updated/recovered.
+ For reset/recovery the related file should be toggled by 1/0.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_wp
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_wp
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow access to External Root of Trust (EROT) for reset
+ and recovery sequence after EROT device failure.
+ Default is 0 (programming disabled).
+ If the system is in locked-down mode writing this file will not be allowed.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/spi_chnl_select
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows SPI chip selection for External Root of Trust (EROT)
+ device Out-of-Band recovery.
+ File can be written with 0 or with 1. It selects which EROT can be accessed
+ through SPI device.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_pg_fail
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak vadimp@nvidia.com
+Description: This file shows ASIC Power Good status.
+ Value 1 in file means ASIC Power Good failed, 0 - otherwise.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd1_boot_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd2_boot_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_fail
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak vadimp@nvidia.com
+Description: These files are related to clock boards status in system.
+ - clk_brd1_boot_fail: warning about 1-st clock board failed to boot from CI.
+ - clk_brd2_boot_fail: warning about 2-nd clock board failed to boot from CI.
+ - clk_brd_fail: error about common clock board boot failure.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_prog_en
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file enables programming of clock boards.
+ Default is 0 (programming disabled).
+ If the system is in locked-down mode writing this file will not be allowed.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_converter_prog_en
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file enables programming of power converters.
+ Default is 0 (programming disabled).
+ If the system is in locked-down mode writing this file will not be allowed.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_ok_fail
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows the system reset cause due to AC power failure.
+ Value 1 in file means this is reset cause, 0 - otherwise.
+
+ The file is read only.
diff --git a/Documentation/ABI/stable/sysfs-hypervisor-xen b/Documentation/ABI/stable/sysfs-hypervisor-xen
index 748593c..be9ca99 100644
--- a/Documentation/ABI/stable/sysfs-hypervisor-xen
+++ b/Documentation/ABI/stable/sysfs-hypervisor-xen
@@ -120,3 +120,16 @@
Description: If running under Xen:
The Xen version is in the format <major>.<minor><extra>
This is the <minor> part of it.
+
+What: /sys/hypervisor/start_flags/*
+Date: March 2023
+KernelVersion: 6.3.0
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ All bits in Xen's start-flags are represented as
+ boolean files, returning '1' if set, '0' otherwise.
+ This takes the place of the defunct /proc/xen/capabilities,
+ which would contain "control_d" on dom0, and be empty
+ otherwise. This flag is now exposed as "initdomain" in
+ addition to the "privileged" flag; all other possible flags
+ are accessible as "unknownXX".
diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget
index b7943aa..a8bb896 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget
+++ b/Documentation/ABI/testing/configfs-usb-gadget
@@ -143,3 +143,16 @@
qw_sign an identifier to be reported as "OS String"
proper
============= ===============================================
+
+What: /config/usb-gadget/gadget/webusb
+Date: Dec 2022
+KernelVersion: 6.3
+Description:
+ This group contains "WebUSB" extension handling attributes.
+
+ ============= ===============================================
+ use flag turning "WebUSB" support on/off
+ bcdVersion bcd WebUSB specification version number
+ bVendorCode one-byte value used for custom per-device
+ landingPage UTF-8 encoded URL of the device's landing page
+ ============= ===============================================
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
index f00cff6..80b98a4 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -15,12 +15,14 @@
KernelVersion: 4.0
Description: Control descriptors
- All attributes read only:
+ All attributes read only except enable_interrupt_ep:
- ================ =============================
+ =================== =============================
bInterfaceNumber USB interface number for this
streaming interface
- ================ =============================
+ enable_interrupt_ep flag to enable the interrupt
+ endpoint for the VC interface
+ =================== =============================
What: /config/usb-gadget/gadget/functions/uvc.name/control/class
Date: Dec 2014
@@ -52,7 +54,7 @@
KernelVersion: 4.0
Description: Default output terminal descriptors
- All attributes read only:
+ All attributes read only except bSourceID:
============== =============================================
iTerminal index of string descriptor
@@ -111,6 +113,34 @@
bUnitID a non-zero id of this unit
=============== ========================================
+What: /config/usb-gadget/gadget/functions/uvc.name/control/extensions
+Date: Nov 2022
+KernelVersion: 6.1
+Description: Extension unit descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/extensions/name
+Date: Nov 2022
+KernelVersion: 6.1
+Description: Extension Unit (XU) Descriptor
+
+ bLength, bUnitID and iExtension are read-only. All others are
+ read-write.
+
+ ================= ========================================
+ bLength size of the descriptor in bytes
+ bUnitID non-zero ID of this unit
+ guidExtensionCode Vendor-specific code identifying the XU
+ bNumControls number of controls in this XU
+ bNrInPins number of input pins for this unit
+ baSourceID list of the IDs of the units or terminals
+ to which this XU is connected
+ bControlSize size of the bmControls field in bytes
+ bmControls list of bitmaps detailing which vendor
+ specific controls are supported
+ iExtension index of a string descriptor that describes
+ this extension unit
+ ================= ========================================
+
What: /config/usb-gadget/gadget/functions/uvc.name/control/header
Date: Dec 2014
KernelVersion: 4.0
@@ -165,7 +195,24 @@
KernelVersion: 4.0
Description: Default color matching descriptors
- All attributes read only:
+ All attributes read/write:
+
+ ======================== ======================================
+ bMatrixCoefficients matrix used to compute luma and
+ chroma values from the color primaries
+ bTransferCharacteristics optoelectronic transfer
+ characteristic of the source picture,
+ also called the gamma function
+ bColorPrimaries color primaries and the reference
+ white
+ ======================== ======================================
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching/name
+Date: Dec 2022
+KernelVersion: 6.3
+Description: Additional color matching descriptors
+
+ All attributes read/write:
======================== ======================================
bMatrixCoefficients matrix used to compute luma and
diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc
new file mode 100644
index 0000000..27ed591
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-dcc
@@ -0,0 +1,127 @@
+What: /sys/kernel/debug/dcc/.../ready
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This file is used to check the status of the dcc
+ hardware if it's ready to receive user configurations.
+ A 'Y' here indicates dcc is ready.
+
+What: /sys/kernel/debug/dcc/.../trigger
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This is the debugfs interface for manual software
+ triggers. The trigger can be invoked by writing '1'
+ to the file.
+
+What: /sys/kernel/debug/dcc/.../config_reset
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This file is used to reset the configuration of
+ a dcc driver to the default configuration. When '1'
+ is written to the file, all the previous addresses
+ stored in the driver gets removed and users need to
+ reconfigure addresses again.
+
+What: /sys/kernel/debug/dcc/.../[list-number]/config
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This stores the addresses of the registers which
+ can be read in case of a hardware crash or manual
+ software triggers. The input addresses type
+ can be one of following dcc instructions: read,
+ write, read-write, and loop type. The lists need to
+ be configured sequentially and not in a overlapping
+ manner; e.g. users can jump to list x only after
+ list y is configured and enabled. The input format for
+ each type is as follows:
+
+ i) Read instruction
+
+ ::
+
+ echo R <addr> <n> <bus> >/sys/kernel/debug/dcc/../[list-number]/config
+
+ where:
+
+ <addr>
+ The address to be read.
+
+ <n>
+ The addresses word count, starting from address <1>.
+ Each word is 32 bits (4 bytes). If omitted, defaulted
+ to 1.
+
+ <bus type>
+ The bus type, which can be either 'apb' or 'ahb'.
+ The default is 'ahb' if leaved out.
+
+ ii) Write instruction
+
+ ::
+
+ echo W <addr> <n> <bus type> > /sys/kernel/debug/dcc/../[list-number]/config
+
+ where:
+
+ <addr>
+ The address to be written.
+
+ <n>
+ The value to be written at <addr>.
+
+ <bus type>
+ The bus type, which can be either 'apb' or 'ahb'.
+
+ iii) Read-write instruction
+
+ ::
+
+ echo RW <addr> <n> <mask> > /sys/kernel/debug/dcc/../[list-number]/config
+
+ where:
+
+ <addr>
+ The address to be read and written.
+
+ <n>
+ The value to be written at <addr>.
+
+ <mask>
+ The value mask.
+
+ iv) Loop instruction
+
+ ::
+
+ echo L <loop count> <address count> <address>... > /sys/kernel/debug/dcc/../[list-number]/config
+
+ where:
+
+ <loop count>
+ Number of iterations
+
+ <address count>
+ total number of addresses to be written
+
+ <address>
+ Space-separated list of addresses.
+
+What: /sys/kernel/debug/dcc/.../[list-number]/enable
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This debugfs interface is used for enabling the
+ the dcc hardware. A file named "enable" is in the
+ directory list number where users can enable/disable
+ the specific list by writing boolean (1 or 0) to the
+ file.
+
+ On enabling the dcc, all the addresses specified
+ by the user for the corresponding list is written
+ into dcc sram which is read by the dcc hardware
+ on manual or crash induced triggers. Lists must
+ be configured and enabled sequentially, e.g. list
+ 2 can only be enabled when list 1 have so.
diff --git a/Documentation/ABI/testing/debugfs-scmi b/Documentation/ABI/testing/debugfs-scmi
new file mode 100644
index 0000000..ee7179a
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-scmi
@@ -0,0 +1,70 @@
+What: /sys/kernel/debug/scmi/<n>/instance_name
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: The name of the underlying SCMI instance <n> described by
+ all the debugfs accessors rooted at /sys/kernel/debug/scmi/<n>,
+ expressed as the full name of the top DT SCMI node under which
+ this SCMI instance is rooted.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/atomic_threshold_us
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: An optional time value, expressed in microseconds, representing,
+ on this SCMI instance <n>, the threshold above which any SCMI
+ command, advertised to have an higher-than-threshold execution
+ latency, should not be considered for atomic mode of operation,
+ even if requested.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/type
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: A string representing the type of transport configured for this
+ SCMI instance <n>.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/is_atomic
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: A boolean stating if the transport configured on the underlying
+ SCMI instance <n> is capable of atomic mode of operation.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/max_rx_timeout_ms
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: Timeout in milliseconds allowed for SCMI synchronous replies
+ for the currently configured SCMI transport for instance <n>.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/max_msg_size
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: Max message size of allowed SCMI messages for the currently
+ configured SCMI transport for instance <n>.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/tx_max_msg
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: Max number of concurrently allowed in-flight SCMI messages for
+ the currently configured SCMI transport for instance <n> on the
+ TX channels.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/rx_max_msg
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: Max number of concurrently allowed in-flight SCMI messages for
+ the currently configured SCMI transport for instance <n> on the
+ RX channels.
+Users: Debugging, any userspace test suite
diff --git a/Documentation/ABI/testing/debugfs-scmi-raw b/Documentation/ABI/testing/debugfs-scmi-raw
new file mode 100644
index 0000000..97678cc
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-scmi-raw
@@ -0,0 +1,117 @@
+What: /sys/kernel/debug/scmi/<n>/raw/message
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw synchronous message injection/snooping facility; write
+ a complete SCMI synchronous command message (header included)
+ in little-endian binary format to have it sent to the configured
+ backend SCMI server for instance <n>.
+ Any subsequently received response can be read from this same
+ entry if it arrived within the configured timeout.
+ Each write to the entry causes one command request to be built
+ and sent while the replies are read back one message at time
+ (receiving an EOF at each message boundary).
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/message_async
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw asynchronous message injection/snooping facility; write
+ a complete SCMI asynchronous command message (header included)
+ in little-endian binary format to have it sent to the configured
+ backend SCMI server for instance <n>.
+ Any subsequently received response can be read from this same
+ entry if it arrived within the configured timeout.
+ Any additional delayed response received afterwards can be read
+ from this same entry too if it arrived within the configured
+ timeout.
+ Each write to the entry causes one command request to be built
+ and sent while the replies are read back one message at time
+ (receiving an EOF at each message boundary).
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/errors
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw message errors facility; any kind of timed-out or
+ generally unexpectedly received SCMI message, for instance <n>,
+ can be read from this entry.
+ Each read gives back one message at time (receiving an EOF at
+ each message boundary).
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/notification
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw notification snooping facility; any notification
+ emitted by the backend SCMI server, for instance <n>, can be
+ read from this entry.
+ Each read gives back one message at time (receiving an EOF at
+ each message boundary).
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/reset
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw stack reset facility; writing a value to this entry
+ causes the internal queues of any kind of received message,
+ still pending to be read out for instance <n>, to be immediately
+ flushed.
+ Can be used to reset and clean the SCMI Raw stack between to
+ different test-run.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/channels/<m>/message
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw synchronous message injection/snooping facility; write
+ a complete SCMI synchronous command message (header included)
+ in little-endian binary format to have it sent to the configured
+ backend SCMI server for instance <n> through the <m> transport
+ channel.
+ Any subsequently received response can be read from this same
+ entry if it arrived on channel <m> within the configured
+ timeout.
+ Each write to the entry causes one command request to be built
+ and sent while the replies are read back one message at time
+ (receiving an EOF at each message boundary).
+ Channel identifier <m> matches the SCMI protocol number which
+ has been associated with this transport channel in the DT
+ description, with base protocol number 0x10 being the default
+ channel for this instance.
+ Note that these per-channel entries rooted at <..>/channels
+ exist only if the transport is configured to have more than
+ one default channel.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/channels/<m>/message_async
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw asynchronous message injection/snooping facility; write
+ a complete SCMI asynchronous command message (header included)
+ in little-endian binary format to have it sent to the configured
+ backend SCMI server for instance <n> through the <m> transport
+ channel.
+ Any subsequently received response can be read from this same
+ entry if it arrived on channel <m> within the configured
+ timeout.
+ Any additional delayed response received afterwards can be read
+ from this same entry too if it arrived within the configured
+ timeout.
+ Each write to the entry causes one command request to be built
+ and sent while the replies are read back one message at time
+ (receiving an EOF at each message boundary).
+ Channel identifier <m> matches the SCMI protocol number which
+ has been associated with this transport channel in the DT
+ description, with base protocol number 0x10 being the default
+ channel for this instance.
+ Note that these per-channel entries rooted at <..>/channels
+ exist only if the transport is configured to have more than
+ one default channel.
+Users: Debugging, any userspace test suite
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
index db17fc8..49db0ff 100644
--- a/Documentation/ABI/testing/ima_policy
+++ b/Documentation/ABI/testing/ima_policy
@@ -35,7 +35,7 @@
[FIRMWARE_CHECK]
[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
[KEXEC_CMDLINE] [KEY_CHECK] [CRITICAL_DATA]
- [SETXATTR_CHECK]
+ [SETXATTR_CHECK][MMAP_CHECK_REQPROT]
mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
[[^]MAY_EXEC]
fsmagic:= hex value
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
index 651602a..234c33f 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -236,7 +236,7 @@
Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (RW) Holds the trace ID that will appear in the trace stream
+Description: (RO) Holds the trace ID that will appear in the trace stream
coming from this trace entity.
What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/trigger_event
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
new file mode 100644
index 0000000..4a58e64
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
@@ -0,0 +1,13 @@
+What: /sys/bus/coresight/devices/<tpdm-name>/integration_test
+Date: January 2023
+KernelVersion 6.2
+Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+ (Write) Run integration test for tpdm. Integration test
+ will generate test data for tpdm. It can help to make
+ sure that the trace path is enabled and the link configurations
+ are fine.
+
+ Accepts only one of the 2 values - 1 or 2.
+ 1 : Generate 64 bits data
+ 2 : Generate 32 bits data
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
new file mode 100644
index 0000000..f560918
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
@@ -0,0 +1,31 @@
+What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
+Date: January 2023
+KernelVersion: 6.3
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (RW) Add/remove a SMB device from a trace path. There can be
+ multiple sources for a single SMB device.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
+Date: January 2023
+KernelVersion: 6.3
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (RO) Shows the buffer size of each UltraSoc SMB device.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
+Date: January 2023
+KernelVersion: 6.3
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (RO) Shows the value of UltraSoc SMB status register.
+ BIT(0) is zero means buffer is empty.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
+Date: January 2023
+KernelVersion: 6.3
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (RO) Shows the value of UltraSoc SMB Read Pointer register.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
+Date: January 2023
+KernelVersion: 6.3
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (RO) Shows the value of UltraSoc SMB Write Pointer register.
diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css
index 12a733f..d4d5cfb 100644
--- a/Documentation/ABI/testing/sysfs-bus-css
+++ b/Documentation/ABI/testing/sysfs-bus-css
@@ -1,22 +1,19 @@
What: /sys/bus/css/devices/.../type
Date: March 2008
-Contact: Cornelia Huck <cornelia.huck@de.ibm.com>
- linux-s390@vger.kernel.org
+Contact: linux-s390@vger.kernel.org
Description: Contains the subchannel type, as reported by the hardware.
This attribute is present for all subchannel types.
What: /sys/bus/css/devices/.../modalias
Date: March 2008
-Contact: Cornelia Huck <cornelia.huck@de.ibm.com>
- linux-s390@vger.kernel.org
+Contact: linux-s390@vger.kernel.org
Description: Contains the module alias as reported with uevents.
It is of the format css:t<type> and present for all
subchannel types.
What: /sys/bus/css/drivers/io_subchannel/.../chpids
Date: December 2002
-Contact: Cornelia Huck <cornelia.huck@de.ibm.com>
- linux-s390@vger.kernel.org
+Contact: linux-s390@vger.kernel.org
Description: Contains the ids of the channel paths used by this
subchannel, as reported by the channel subsystem
during subchannel recognition.
@@ -26,8 +23,7 @@
What: /sys/bus/css/drivers/io_subchannel/.../pimpampom
Date: December 2002
-Contact: Cornelia Huck <cornelia.huck@de.ibm.com>
- linux-s390@vger.kernel.org
+Contact: linux-s390@vger.kernel.org
Description: Contains the PIM/PAM/POM values, as reported by the
channel subsystem when last queried by the common I/O
layer (this implies that this attribute is not necessarily
@@ -38,8 +34,7 @@
What: /sys/bus/css/devices/.../driver_override
Date: June 2019
-Contact: Cornelia Huck <cohuck@redhat.com>
- linux-s390@vger.kernel.org
+Contact: linux-s390@vger.kernel.org
Description: This file allows the driver for a device to be specified. When
specified, only a driver with a name matching the value written
to driver_override will have an opportunity to bind to the
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
index 8494ef2..3acf2f1 100644
--- a/Documentation/ABI/testing/sysfs-bus-cxl
+++ b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -90,6 +90,21 @@
capability.
+What: /sys/bus/cxl/devices/{port,endpoint}X/parent_dport
+Date: January, 2023
+KernelVersion: v6.3
+Contact: linux-cxl@vger.kernel.org
+Description:
+ (RO) CXL port objects are instantiated for each upstream port in
+ a CXL/PCIe switch, and for each endpoint to map the
+ corresponding memory device into the CXL port hierarchy. When a
+ descendant CXL port (switch or endpoint) is enumerated it is
+ useful to know which 'dport' object in the parent CXL port
+ routes to this descendant. The 'parent_dport' symlink points to
+ the device representing the downstream port of a CXL switch that
+ routes to {port,endpoint}X.
+
+
What: /sys/bus/cxl/devices/portX/dportY
Date: June, 2021
KernelVersion: v5.14
@@ -183,7 +198,7 @@
What: /sys/bus/cxl/devices/endpointX/CDAT
Date: July, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RO) If this sysfs entry is not present no DOE mailbox was
@@ -194,7 +209,7 @@
What: /sys/bus/cxl/devices/decoderX.Y/mode
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
@@ -214,7 +229,7 @@
What: /sys/bus/cxl/devices/decoderX.Y/dpa_resource
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RO) When a CXL decoder is of devtype "cxl_decoder_endpoint",
@@ -225,7 +240,7 @@
What: /sys/bus/cxl/devices/decoderX.Y/dpa_size
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
@@ -245,7 +260,7 @@
What: /sys/bus/cxl/devices/decoderX.Y/interleave_ways
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RO) The number of targets across which this decoder's host
@@ -260,7 +275,7 @@
What: /sys/bus/cxl/devices/decoderX.Y/interleave_granularity
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RO) The number of consecutive bytes of host physical address
@@ -270,25 +285,25 @@
interleave_granularity).
-What: /sys/bus/cxl/devices/decoderX.Y/create_pmem_region
-Date: May, 2022
-KernelVersion: v5.20
+What: /sys/bus/cxl/devices/decoderX.Y/create_{pmem,ram}_region
+Date: May, 2022, January, 2023
+KernelVersion: v6.0 (pmem), v6.3 (ram)
Contact: linux-cxl@vger.kernel.org
Description:
(RW) Write a string in the form 'regionZ' to start the process
- of defining a new persistent memory region (interleave-set)
- within the decode range bounded by root decoder 'decoderX.Y'.
- The value written must match the current value returned from
- reading this attribute. An atomic compare exchange operation is
- done on write to assign the requested id to a region and
- allocate the region-id for the next creation attempt. EBUSY is
- returned if the region name written does not match the current
- cached value.
+ of defining a new persistent, or volatile memory region
+ (interleave-set) within the decode range bounded by root decoder
+ 'decoderX.Y'. The value written must match the current value
+ returned from reading this attribute. An atomic compare exchange
+ operation is done on write to assign the requested id to a
+ region and allocate the region-id for the next creation attempt.
+ EBUSY is returned if the region name written does not match the
+ current cached value.
What: /sys/bus/cxl/devices/decoderX.Y/delete_region
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(WO) Write a string in the form 'regionZ' to delete that region,
@@ -297,17 +312,18 @@
What: /sys/bus/cxl/devices/regionZ/uuid
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RW) Write a unique identifier for the region. This field must
be set for persistent regions and it must not conflict with the
- UUID of another region.
+ UUID of another region. For volatile ram regions this
+ attribute is a read-only empty string.
What: /sys/bus/cxl/devices/regionZ/interleave_granularity
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RW) Set the number of consecutive bytes each device in the
@@ -318,7 +334,7 @@
What: /sys/bus/cxl/devices/regionZ/interleave_ways
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RW) Configures the number of devices participating in the
@@ -328,7 +344,7 @@
What: /sys/bus/cxl/devices/regionZ/size
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RW) System physical address space to be consumed by the region.
@@ -343,9 +359,20 @@
results in the same address being allocated.
+What: /sys/bus/cxl/devices/regionZ/mode
+Date: January, 2023
+KernelVersion: v6.3
+Contact: linux-cxl@vger.kernel.org
+Description:
+ (RO) The mode of a region is established at region creation time
+ and dictates the mode of the endpoint decoder that comprise the
+ region. For more details on the possible modes see
+ /sys/bus/cxl/devices/decoderX.Y/mode
+
+
What: /sys/bus/cxl/devices/regionZ/resource
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RO) A region is a contiguous partition of a CXL root decoder
@@ -357,7 +384,7 @@
What: /sys/bus/cxl/devices/regionZ/target[0..N]
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RW) Write an endpoint decoder object name to 'targetX' where X
@@ -376,7 +403,7 @@
What: /sys/bus/cxl/devices/regionZ/commit
Date: May, 2022
-KernelVersion: v5.20
+KernelVersion: v6.0
Contact: linux-cxl@vger.kernel.org
Description:
(RW) Write a boolean 'true' string value to this attribute to
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-iommu b/Documentation/ABI/testing/sysfs-bus-event_source-devices-iommu
new file mode 100644
index 0000000..d7af491
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-iommu
@@ -0,0 +1,37 @@
+What: /sys/bus/event_source/devices/dmar*/format
+Date: Jan 2023
+KernelVersion: 6.3
+Contact: Kan Liang <kan.liang@linux.intel.com>
+Description: Read-only. Attribute group to describe the magic bits
+ that go into perf_event_attr.config,
+ perf_event_attr.config1 or perf_event_attr.config2 for
+ the IOMMU pmu. (See also
+ ABI/testing/sysfs-bus-event_source-devices-format).
+
+ Each attribute in this group defines a bit range in
+ perf_event_attr.config, perf_event_attr.config1,
+ or perf_event_attr.config2. All supported attributes
+ are listed below (See the VT-d Spec 4.0 for possible
+ attribute values)::
+
+ event = "config:0-27" - event ID
+ event_group = "config:28-31" - event group ID
+
+ filter_requester_en = "config1:0" - Enable Requester ID filter
+ filter_domain_en = "config1:1" - Enable Domain ID filter
+ filter_pasid_en = "config1:2" - Enable PASID filter
+ filter_ats_en = "config1:3" - Enable Address Type filter
+ filter_page_table_en= "config1:4" - Enable Page Table Level filter
+ filter_requester_id = "config1:16-31" - Requester ID filter
+ filter_domain = "config1:32-47" - Domain ID filter
+ filter_pasid = "config2:0-21" - PASID filter
+ filter_ats = "config2:24-28" - Address Type filter
+ filter_page_table = "config2:32-36" - Page Table Level filter
+
+What: /sys/bus/event_source/devices/dmar*/cpumask
+Date: Jan 2023
+KernelVersion: 6.3
+Contact: Kan Liang <kan.liang@linux.intel.com>
+Description: Read-only. This file always returns the CPU to which the
+ IOMMU pmu is bound for access to all IOMMU pmu performance
+ monitoring events.
diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon
index 7271781..638f4c6 100644
--- a/Documentation/ABI/testing/sysfs-class-hwmon
+++ b/Documentation/ABI/testing/sysfs-class-hwmon
@@ -276,6 +276,15 @@
RW
+What: /sys/class/hwmon/hwmonX/fanY_fault
+Description:
+ Reports if a fan has reported failure.
+
+ - 1: Failed
+ - 0: Ok
+
+ RO
+
What: /sys/class/hwmon/hwmonX/pwmY
Description:
Pulse width modulation fan control.
diff --git a/Documentation/ABI/testing/sysfs-class-net-peak_usb b/Documentation/ABI/testing/sysfs-class-net-peak_usb
new file mode 100644
index 0000000..9e3d0bf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-peak_usb
@@ -0,0 +1,19 @@
+
+What: /sys/class/net/<iface>/peak_usb/can_channel_id
+Date: November 2022
+KernelVersion: 6.2
+Contact: Stephane Grosjean <s.grosjean@peak-system.com>
+Description:
+ PEAK PCAN-USB devices support user-configurable CAN channel
+ identifiers. Contrary to a USB serial number, these identifiers
+ are writable and can be set per CAN interface. This means that
+ if a USB device exports multiple CAN interfaces, each of them
+ can be assigned a unique channel ID.
+ This attribute provides read-only access to the currently
+ configured value of the channel identifier. Depending on the
+ device type, the identifier has a length of 8 or 32 bit. The
+ value read from this attribute is always an 8 digit 32 bit
+ hexadecimal value in big endian format. If the device only
+ supports an 8 bit identifier, the upper 24 bit of the value are
+ set to zero.
+
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index e434fc5..7c81f0a 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -437,7 +437,8 @@
Date: May 2007
Contact: linux-pm@vger.kernel.org
Description:
- Reports whether a battery is present or not in the system.
+ Reports whether a battery is present or not in the system. If the
+ property does not exist, the battery is considered to be present.
Access: Read
diff --git a/Documentation/ABI/testing/sysfs-class-power-rt9467 b/Documentation/ABI/testing/sysfs-class-power-rt9467
new file mode 100644
index 0000000..619b7c4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power-rt9467
@@ -0,0 +1,19 @@
+What: /sys/class/power_supply/rt9467-*/sysoff_enable
+Date: Feb 2023
+KernelVersion: 6.3
+Contact: ChiaEn Wu <chiaen_wu@richtek.com>
+Description:
+ This entry allows enabling the sysoff mode of rt9467 charger
+ devices.
+ If enabled and the input is removed, the internal battery FET
+ is turned off to reduce the leakage from the BAT pin. See
+ device datasheet for details. It's commonly used when the
+ product enter shipping stage. After entering shipping mode,
+ only 'VBUS' or 'Power key" pressed can make it leave this mode.
+ 'Disable' also can help to leave it, but it's more like to
+ abort the action before the device really enter shipping mode.
+
+ Access: Read, Write
+ Valid values:
+ - 1: enabled
+ - 0: disabled
diff --git a/Documentation/ABI/testing/sysfs-class-power-rt9471 b/Documentation/ABI/testing/sysfs-class-power-rt9471
new file mode 100644
index 0000000..0a390ee
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power-rt9471
@@ -0,0 +1,32 @@
+What: /sys/class/power_supply/rt9471-*/sysoff_enable
+Date: Feb 2023
+KernelVersion: 6.3
+Contact: ChiYuan Huang <cy_huang@richtek.com>
+Description:
+ This entry allows enabling the sysoff mode of rt9471 charger devices.
+ If enabled and the input is removed, the internal battery FET is turned
+ off to reduce the leakage from the BAT pin. See device datasheet for details.
+ It's commonly used when the product enter shipping stage. After entering
+ shipping mode, only 'VBUS' or 'Power key" pressed can make it leave this
+ mode. 'Disable' also can help to leave it, but it's more like to abort
+ the action before the device really enter shipping mode.
+
+ Access: Read, Write
+ Valid values:
+ - 1: enabled
+ - 0: disabled
+
+What: /sys/class/power_supply/rt9471-*/port_detect_enable
+Date: Feb 2023
+KernelVersion: 6.3
+Contact: ChiYuan Huang <cy_huang@richtek.com>
+Description:
+ This entry allows enabling the USB BC12 port detect function of rt9471 charger
+ devices. If enabled and VBUS is inserted, device will start to do the BC12
+ port detect and report the usb port type when port detect is done. See
+ datasheet for details. Normally controlled when TypeC/USBPD port integrated.
+
+ Access: Read, Write
+ Valid values:
+ - 1: enabled
+ - 0: disabled
diff --git a/Documentation/ABI/testing/sysfs-class-usb_power_delivery b/Documentation/ABI/testing/sysfs-class-usb_power_delivery
index ce2b1b5..1bf9d1d 100644
--- a/Documentation/ABI/testing/sysfs-class-usb_power_delivery
+++ b/Documentation/ABI/testing/sysfs-class-usb_power_delivery
@@ -69,7 +69,7 @@
This file contains boolean value that tells does the device
support both source and sink power roles.
-What: /sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_suspend_supported
+What: /sys/class/usb_power_delivery/.../source-capabilities/1:fixed_supply/usb_suspend_supported
Date: May 2022
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Description:
@@ -78,6 +78,15 @@
will follow the USB 2.0 and USB 3.2 rules for suspend and
resume.
+What: /sys/class/usb_power_delivery/.../sink-capabilities/1:fixed_supply/higher_capability
+Date: February 2023
+Contact: Saranya Gopal <saranya.gopal@linux.intel.com>
+Description:
+ This file shows the value of the Higher capability bit in
+ vsafe5V Fixed Supply Object. If the bit is set, then the sink
+ needs more than vsafe5V(eg. 12 V) to provide full functionality.
+ Valid values: 0, 1
+
What: /sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unconstrained_power
Date: May 2022
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog
index 585caec..94fb746 100644
--- a/Documentation/ABI/testing/sysfs-class-watchdog
+++ b/Documentation/ABI/testing/sysfs-class-watchdog
@@ -6,6 +6,19 @@
device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of
ioctl interface.
+What: /sys/class/watchdog/watchdogn/options
+Date: April 2023
+Contact: Thomas Weißschuh
+Description:
+ It is a read only file. It contains options of watchdog device.
+
+What: /sys/class/watchdog/watchdogn/fw_version
+Date: April 2023
+Contact: Thomas Weißschuh
+Description:
+ It is a read only file. It contains firmware version of
+ watchdog device.
+
What: /sys/class/watchdog/watchdogn/identity
Date: August 2015
Contact: Wim Van Sebroeck <wim@iguana.be>
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs
index 13b5b2e..1b98b65 100644
--- a/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ b/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -201,7 +201,19 @@
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
-Description: Status of the card: "Operational", "Malfunction", "In reset".
+Description: Status of the card:
+
+ * "operational" - Device is available for work.
+ * "in reset" - Device is going through reset, will be
+ available shortly.
+ * "disabled" - Device is not usable.
+ * "needs reset" - Device is not usable until a hard reset
+ is initiated.
+ * "in device creation" - Device is not available yet, as it
+ is still initializing.
+ * "in reset after device release" - Device is going through
+ a compute-reset which is executed after a device release
+ (relevant for Gaudi2 only).
What: /sys/class/habanalabs/hl<n>/thermal_ver
Date: Jan 2019
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
index 9773925..a8ab580 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
+++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
@@ -1,4 +1,4 @@
-What: /sys/bus/spi/devices/.../bmc_version
+What: /sys/bus/.../drivers/intel-m10-bmc/.../bmc_version
Date: June 2020
KernelVersion: 5.10
Contact: Xu Yilun <yilun.xu@intel.com>
@@ -6,7 +6,7 @@
MAX10 BMC chip.
Format: "0x%x".
-What: /sys/bus/spi/devices/.../bmcfw_version
+What: /sys/bus/.../drivers/intel-m10-bmc/.../bmcfw_version
Date: June 2020
KernelVersion: 5.10
Contact: Xu Yilun <yilun.xu@intel.com>
@@ -14,7 +14,7 @@
BMC chip.
Format: "0x%x".
-What: /sys/bus/spi/devices/.../mac_address
+What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_address
Date: January 2021
KernelVersion: 5.12
Contact: Russ Weight <russell.h.weight@intel.com>
@@ -25,7 +25,7 @@
space.
Format: "%02x:%02x:%02x:%02x:%02x:%02x".
-What: /sys/bus/spi/devices/.../mac_count
+What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_count
Date: January 2021
KernelVersion: 5.12
Contact: Russ Weight <russell.h.weight@intel.com>
diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat
index 185f81a..087842b 100644
--- a/Documentation/ABI/testing/sysfs-driver-qat
+++ b/Documentation/ABI/testing/sysfs-driver-qat
@@ -1,6 +1,6 @@
What: /sys/bus/pci/devices/<BDF>/qat/state
Date: June 2022
-KernelVersion: 5.20
+KernelVersion: 6.0
Contact: qat-linux@intel.com
Description: (RW) Reports the current state of the QAT device. Write to
the file to start or stop the device.
@@ -18,7 +18,7 @@
What: /sys/bus/pci/devices/<BDF>/qat/cfg_services
Date: June 2022
-KernelVersion: 5.20
+KernelVersion: 6.0
Contact: qat-linux@intel.com
Description: (RW) Reports the current configuration of the QAT device.
Write to the file to change the configured services.
diff --git a/Documentation/ABI/testing/sysfs-driver-typec-displayport b/Documentation/ABI/testing/sysfs-driver-typec-displayport
index 231471a..256c87c5 100644
--- a/Documentation/ABI/testing/sysfs-driver-typec-displayport
+++ b/Documentation/ABI/testing/sysfs-driver-typec-displayport
@@ -47,3 +47,18 @@
USB SuperSpeed protocol. From user perspective pin assignments C
and E are equal, where all channels on the connector are used
for carrying DisplayPort protocol (allowing higher resolutions).
+
+What: /sys/bus/typec/devices/.../displayport/hpd
+Date: Dec 2022
+Contact: Badhri Jagan Sridharan <badhri@google.com>
+Description:
+ VESA DisplayPort Alt Mode on USB Type-C Standard defines how
+ HotPlugDetect(HPD) shall be supported on the USB-C connector when
+ operating in DisplayPort Alt Mode. This is a read only node which
+ reflects the current state of HPD.
+
+ Valid values:
+ - 1: when HPD’s logical state is high (HPD_High) as defined
+ by VESA DisplayPort Alt Mode on USB Type-C Standard.
+ - 0 when HPD’s logical state is low (HPD_Low) as defined by
+ VESA DisplayPort Alt Mode on USB Type-C Standard.
diff --git a/Documentation/ABI/testing/sysfs-driver-uacce b/Documentation/ABI/testing/sysfs-driver-uacce
index 08f2591..d3f0b8f 100644
--- a/Documentation/ABI/testing/sysfs-driver-uacce
+++ b/Documentation/ABI/testing/sysfs-driver-uacce
@@ -19,6 +19,24 @@
Description: Available instances left of the device
Return -ENODEV if uacce_ops get_available_instances is not provided
+What: /sys/class/uacce/<dev_name>/isolate_strategy
+Date: Nov 2022
+KernelVersion: 6.1
+Contact: linux-accelerators@lists.ozlabs.org
+Description: (RW) A sysfs node that configure the error threshold for the hardware
+ isolation strategy. This size is a configured integer value, which is the
+ number of threshold for hardware errors occurred in one hour. The default is 0.
+ 0 means never isolate the device. The maximum value is 65535. You can write
+ a number of threshold based on your hardware.
+
+What: /sys/class/uacce/<dev_name>/isolate
+Date: Nov 2022
+KernelVersion: 6.1
+Contact: linux-accelerators@lists.ozlabs.org
+Description: (R) A sysfs node that read the device isolated state. The value 1
+ means the device is unavailable. The 0 means the device is
+ available.
+
What: /sys/class/uacce/<dev_name>/algorithms
Date: Feb 2020
KernelVersion: 5.7
diff --git a/Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager b/Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager
new file mode 100644
index 0000000..57b9b68
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager
@@ -0,0 +1,16 @@
+What: /sys/devices/platform/amba_pl/<dev>/errcnt
+Date: Nov 2022
+Contact: appana.durga.kedareswara.rao@amd.com
+Description: This control file provides the fault detection count.
+ This file cannot be written.
+ Example:
+ # cat /sys/devices/platform/amba_pl/44a10000.tmr_manager/errcnt
+ 1
+
+What: /sys/devices/platform/amba_pl/<dev>/dis_block_break
+Date: Nov 2022
+Contact: appana.durga.kedareswara.rao@amd.com
+Description: Write any value to it, This control file enables the break signal.
+ This file is write only.
+ Example:
+ # echo <any value> > /sys/devices/platform/amba_pl/44a10000.tmr_manager/dis_block_break
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index 9e37566..9413274 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -49,16 +49,23 @@
Description: Controls the in-place-update policy.
updates in f2fs. User can set:
- ==== =================
- 0x01 F2FS_IPU_FORCE
- 0x02 F2FS_IPU_SSR
- 0x04 F2FS_IPU_UTIL
- 0x08 F2FS_IPU_SSR_UTIL
- 0x10 F2FS_IPU_FSYNC
- 0x20 F2FS_IPU_ASYNC
- 0x40 F2FS_IPU_NOCACHE
- 0x80 F2FS_IPU_HONOR_OPU_WRITE
- ==== =================
+ ===== =============== ===================================================
+ value policy description
+ 0x00 DISABLE disable IPU(=default option in LFS mode)
+ 0x01 FORCE all the time
+ 0x02 SSR if SSR mode is activated
+ 0x04 UTIL if FS utilization is over threashold
+ 0x08 SSR_UTIL if SSR mode is activated and FS utilization is over
+ threashold
+ 0x10 FSYNC activated in fsync path only for high performance
+ flash storages. IPU will be triggered only if the
+ # of dirty pages over min_fsync_blocks.
+ (=default option)
+ 0x20 ASYNC do IPU given by asynchronous write requests
+ 0x40 NOCACHE disable IPU bio cache
+ 0x80 HONOR_OPU_WRITE use OPU write prior to IPU write if inode has
+ FI_OPU_WRITE flag
+ ===== =============== ===================================================
Refer segment.h for details.
@@ -669,3 +676,56 @@
Description: When DATA SEPARATION is on, it controls the age threshold to indicate
the data blocks as warm. By default it was initialized as 2621440 blocks
(equals to 10GB).
+
+What: /sys/fs/f2fs/<disk>/fault_rate
+Date: May 2016
+Contact: "Sheng Yong" <shengyong@oppo.com>
+Contact: "Chao Yu" <chao@kernel.org>
+Description: Enable fault injection in all supported types with
+ specified injection rate.
+
+What: /sys/fs/f2fs/<disk>/fault_type
+Date: May 2016
+Contact: "Sheng Yong" <shengyong@oppo.com>
+Contact: "Chao Yu" <chao@kernel.org>
+Description: Support configuring fault injection type, should be
+ enabled with fault_injection option, fault type value
+ is shown below, it supports single or combined type.
+
+ =================== ===========
+ Type_Name Type_Value
+ =================== ===========
+ FAULT_KMALLOC 0x000000001
+ FAULT_KVMALLOC 0x000000002
+ FAULT_PAGE_ALLOC 0x000000004
+ FAULT_PAGE_GET 0x000000008
+ FAULT_ALLOC_BIO 0x000000010 (obsolete)
+ FAULT_ALLOC_NID 0x000000020
+ FAULT_ORPHAN 0x000000040
+ FAULT_BLOCK 0x000000080
+ FAULT_DIR_DEPTH 0x000000100
+ FAULT_EVICT_INODE 0x000000200
+ FAULT_TRUNCATE 0x000000400
+ FAULT_READ_IO 0x000000800
+ FAULT_CHECKPOINT 0x000001000
+ FAULT_DISCARD 0x000002000
+ FAULT_WRITE_IO 0x000004000
+ FAULT_SLAB_ALLOC 0x000008000
+ FAULT_DQUOT_INIT 0x000010000
+ FAULT_LOCK_OP 0x000020000
+ FAULT_BLKADDR 0x000040000
+ =================== ===========
+
+What: /sys/fs/f2fs/<disk>/discard_io_aware_gran
+Date: January 2023
+Contact: "Yangtao Li" <frank.li@vivo.com>
+Description: Controls background discard granularity of inner discard thread
+ when is not in idle. Inner thread will not issue discards with size that
+ is smaller than granularity. The unit size is one block(4KB), now only
+ support configuring in range of [0, 512].
+ Default: 512
+
+What: /sys/fs/f2fs/<disk>/last_age_weight
+Date: January 2023
+Contact: "Ping Xiong" <xiongping1@xiaomi.com>
+Description: When DATA SEPARATION is on, it controls the weight of last data block age.
diff --git a/Documentation/ABI/testing/sysfs-kernel-address_bits b/Documentation/ABI/testing/sysfs-kernel-address_bits
new file mode 100644
index 0000000..5d09ff8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-address_bits
@@ -0,0 +1,10 @@
+What: /sys/kernel/address_bit
+Date: May 2023
+KernelVersion: 6.3
+Contact: Thomas Weißschuh <linux@weissschuh.net>
+Description:
+ The address size of the running kernel in bits.
+
+ Access: Read
+
+Users: util-linux
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon
index 13397b8..2744f21 100644
--- a/Documentation/ABI/testing/sysfs-kernel-mm-damon
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon
@@ -258,6 +258,35 @@
Description: Writing to and reading from this file sets and gets the low
watermark of the scheme in permil.
+What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/nr_filters
+Date: Dec 2022
+Contact: SeongJae Park <sj@kernel.org>
+Description: Writing a number 'N' to this file creates the number of
+ directories for setting filters of the scheme named '0' to
+ 'N-1' under the filters/ directory.
+
+What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/type
+Date: Dec 2022
+Contact: SeongJae Park <sj@kernel.org>
+Description: Writing to and reading from this file sets and gets the type of
+ the memory of the interest. 'anon' for anonymous pages, or
+ 'memcg' for specific memory cgroup can be written and read.
+
+What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/memcg_path
+Date: Dec 2022
+Contact: SeongJae Park <sj@kernel.org>
+Description: If 'memcg' is written to the 'type' file, writing to and
+ reading from this file sets and gets the path to the memory
+ cgroup of the interest.
+
+What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/matching
+Date: Dec 2022
+Contact: SeongJae Park <sj@kernel.org>
+Description: Writing 'Y' or 'N' to this file sets whether to filter out
+ pages that do or do not match to the 'type' and 'memcg_path',
+ respectively. Filter out means the action of the scheme will
+ not be applied to.
+
What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/nr_tried
Date: Mar 2022
Contact: SeongJae Park <sj@kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
index feebb8c..857cf12b 100644
--- a/Documentation/ABI/testing/sysfs-secvar
+++ b/Documentation/ABI/testing/sysfs-secvar
@@ -18,6 +18,14 @@
This determines the format of the variable and the accepted
format of variable updates.
+ On powernv/OPAL, this value is provided by the OPAL firmware
+ and is expected to be "ibm,edk2-compat-v1".
+
+ On pseries/PLPKS, this is generated by the kernel based on the
+ version number in the SB_VERSION variable in the keystore, and
+ has the form "ibm,plpks-sb-v<version>", or
+ "ibm,plpks-sb-unknown" if there is no SB_VERSION variable.
+
What: /sys/firmware/secvar/vars/<variable name>
Date: August 2019
Contact: Nayna Jain <nayna@linux.ibm.com>
@@ -34,7 +42,7 @@
What: /sys/firmware/secvar/vars/<variable_name>/data
Date: August 2019
-Contact: Nayna Jain h<nayna@linux.ibm.com>
+Contact: Nayna Jain <nayna@linux.ibm.com>
Description: A read-only file containing the value of the variable. The size
of the file represents the maximum size of the variable data.
@@ -44,3 +52,68 @@
Description: A write-only file that is used to submit the new value for the
variable. The size of the file represents the maximum size of
the variable data that can be written.
+
+What: /sys/firmware/secvar/config
+Date: February 2023
+Contact: Nayna Jain <nayna@linux.ibm.com>
+Description: This optional directory contains read-only config attributes as
+ defined by the secure variable implementation. All data is in
+ ASCII format. The directory is only created if the backing
+ implementation provides variables to populate it, which at
+ present is only PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/version
+Date: February 2023
+Contact: Nayna Jain <nayna@linux.ibm.com>
+Description: Config version as reported by the hypervisor in ASCII decimal
+ format.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/max_object_size
+Date: February 2023
+Contact: Nayna Jain <nayna@linux.ibm.com>
+Description: Maximum allowed size of objects in the keystore in bytes,
+ represented in ASCII decimal format.
+
+ This is not necessarily the same as the max size that can be
+ written to an update file as writes can contain more than
+ object data, you should use the size of the update file for
+ that purpose.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/total_size
+Date: February 2023
+Contact: Nayna Jain <nayna@linux.ibm.com>
+Description: Total size of the PLPKS in bytes, represented in ASCII decimal
+ format.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/used_space
+Date: February 2023
+Contact: Nayna Jain <nayna@linux.ibm.com>
+Description: Current space consumed by the key store, in bytes, represented
+ in ASCII decimal format.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/supported_policies
+Date: February 2023
+Contact: Nayna Jain <nayna@linux.ibm.com>
+Description: Bitmask of supported policy flags by the hypervisor,
+ represented as an 8 byte hexadecimal ASCII string. Consult the
+ hypervisor documentation for what these flags are.
+
+ Currently only provided by PLPKS on the pseries platform.
+
+What: /sys/firmware/secvar/config/signed_update_algorithms
+Date: February 2023
+Contact: Nayna Jain <nayna@linux.ibm.com>
+Description: Bitmask of flags indicating which algorithms the hypervisor
+ supports for signed update of objects, represented as a 16 byte
+ hexadecimal ASCII string. Consult the hypervisor documentation
+ for what these flags mean.
+
+ Currently only provided by PLPKS on the pseries platform.
diff --git a/Documentation/Kconfig b/Documentation/Kconfig
index 252bfc1..3a0e7ac 100644
--- a/Documentation/Kconfig
+++ b/Documentation/Kconfig
@@ -1,6 +1,9 @@
+if COMPILE_TEST
+
+menu "Documentation"
+
config WARN_MISSING_DOCUMENTS
bool "Warn if there's a missing documentation file"
- depends on COMPILE_TEST
help
It is not uncommon that a document gets renamed.
This option makes the Kernel to check for missing dependencies,
@@ -11,7 +14,6 @@
config WARN_ABI_ERRORS
bool "Warn if there are errors at ABI files"
- depends on COMPILE_TEST
help
The files under Documentation/ABI should follow what's
described at Documentation/ABI/README. Yet, as they're manually
@@ -20,3 +22,7 @@
scripts/get_abi.pl. Add a check to verify them.
If unsure, select 'N'.
+
+endmenu
+
+endif
diff --git a/Documentation/Makefile b/Documentation/Makefile
index bb73dcb..023fa65 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -28,7 +28,7 @@
PDFLATEX = xelatex
LATEXOPTS = -interaction=batchmode -no-shell-escape
-ifeq ($(KBUILD_VERBOSE),0)
+ifeq ($(findstring 1, $(KBUILD_VERBOSE)),)
SPHINXOPTS += "-q"
endif
diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
index c17c87a..e73f84ae 100644
--- a/Documentation/PCI/index.rst
+++ b/Documentation/PCI/index.rst
@@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0
-=======================
-Linux PCI Bus Subsystem
-=======================
+=================
+PCI Bus Subsystem
+=================
.. toctree::
:maxdepth: 2
diff --git a/Documentation/accel/introduction.rst b/Documentation/accel/introduction.rst
index 6f31af1..89984df 100644
--- a/Documentation/accel/introduction.rst
+++ b/Documentation/accel/introduction.rst
@@ -67,9 +67,9 @@
The accelerator devices will be exposed to the user space with the dedicated
261 major number and will have the following convention:
-- device char files - /dev/accel/accel*
-- sysfs - /sys/class/accel/accel*/
-- debugfs - /sys/kernel/debug/accel/accel*/
+- device char files - /dev/accel/accel\*
+- sysfs - /sys/class/accel/accel\*/
+- debugfs - /sys/kernel/debug/accel/\*/
Getting Started
===============
diff --git a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst
index 8d3a2d0..bb5032a 100644
--- a/Documentation/admin-guide/bcache.rst
+++ b/Documentation/admin-guide/bcache.rst
@@ -204,7 +204,7 @@
This should present your unmodified backing device data in /dev/loop0
If your cache is in writethrough mode, then you can safely discard the
-cache device without loosing data.
+cache device without losing data.
E) Wiping a cache device
diff --git a/Documentation/admin-guide/blockdev/paride.rst b/Documentation/admin-guide/blockdev/paride.rst
index e1ce90a..e85ad37 100644
--- a/Documentation/admin-guide/blockdev/paride.rst
+++ b/Documentation/admin-guide/blockdev/paride.rst
@@ -3,6 +3,7 @@
===================================
PARIDE v1.03 (c) 1997-8 Grant Guenther <grant@torque.net>
+PATA_PARPORT (c) 2023 Ondrej Zary
1. Introduction
===============
@@ -51,27 +52,15 @@
as well as most of the clone and no-name products on the market.
-To support such a wide range of devices, PARIDE, the parallel port IDE
-subsystem, is actually structured in three parts. There is a base
-paride module which provides a registry and some common methods for
-accessing the parallel ports. The second component is a set of
-high-level drivers for each of the different types of supported devices:
+To support such a wide range of devices, pata_parport is actually structured
+in two parts. There is a base pata_parport module which provides an interface
+to kernel libata subsystem, registry and some common methods for accessing
+the parallel ports.
- === =============
- pd IDE disk
- pcd ATAPI CD-ROM
- pf ATAPI disk
- pt ATAPI tape
- pg ATAPI generic
- === =============
-
-(Currently, the pg driver is only used with CD-R drives).
-
-The high-level drivers function according to the relevant standards.
-The third component of PARIDE is a set of low-level protocol drivers
-for each of the parallel port IDE adapter chips. Thanks to the interest
-and encouragement of Linux users from many parts of the world,
-support is available for almost all known adapter protocols:
+The second component is a set of low-level protocol drivers for each of the
+parallel port IDE adapter chips. Thanks to the interest and encouragement of
+Linux users from many parts of the world, support is available for almost all
+known adapter protocols:
==== ====================================== ====
aten ATEN EH-100 (HK)
@@ -91,251 +80,87 @@
==== ====================================== ====
-2. Using the PARIDE subsystem
-=============================
+2. Using pata_parport subsystem
+===============================
While configuring the Linux kernel, you may choose either to build
-the PARIDE drivers into your kernel, or to build them as modules.
+the pata_parport drivers into your kernel, or to build them as modules.
In either case, you will need to select "Parallel port IDE device support"
-as well as at least one of the high-level drivers and at least one
-of the parallel port communication protocols. If you do not know
-what kind of parallel port adapter is used in your drive, you could
-begin by checking the file names and any text files on your DOS
+and at least one of the parallel port communication protocols.
+If you do not know what kind of parallel port adapter is used in your drive,
+you could begin by checking the file names and any text files on your DOS
installation floppy. Alternatively, you can look at the markings on
the adapter chip itself. That's usually sufficient to identify the
correct device.
-You can actually select all the protocol modules, and allow the PARIDE
+You can actually select all the protocol modules, and allow the pata_parport
subsystem to try them all for you.
For the "brand-name" products listed above, here are the protocol
and high-level drivers that you would use:
- ================ ============ ====== ========
- Manufacturer Model Driver Protocol
- ================ ============ ====== ========
- MicroSolutions CD-ROM pcd bpck
- MicroSolutions PD drive pf bpck
- MicroSolutions hard-drive pd bpck
- MicroSolutions 8000t tape pt bpck
- SyQuest EZ, SparQ pd epat
- Imation Superdisk pf epat
- Maxell Superdisk pf friq
- Avatar Shark pd epat
- FreeCom CD-ROM pcd frpw
- Hewlett-Packard 5GB Tape pt epat
- Hewlett-Packard 7200e (CD) pcd epat
- Hewlett-Packard 7200e (CD-R) pg epat
- ================ ============ ====== ========
+ ================ ============ ========
+ Manufacturer Model Protocol
+ ================ ============ ========
+ MicroSolutions CD-ROM bpck
+ MicroSolutions PD drive bpck
+ MicroSolutions hard-drive bpck
+ MicroSolutions 8000t tape bpck
+ SyQuest EZ, SparQ epat
+ Imation Superdisk epat
+ Maxell Superdisk friq
+ Avatar Shark epat
+ FreeCom CD-ROM frpw
+ Hewlett-Packard 5GB Tape epat
+ Hewlett-Packard 7200e (CD) epat
+ Hewlett-Packard 7200e (CD-R) epat
+ ================ ============ ========
-2.1 Configuring built-in drivers
----------------------------------
+All parports and all protocol drivers are probed automatically unless probe=0
+parameter is used. So just "modprobe epat" is enough for a Imation SuperDisk
+drive to work.
-We recommend that you get to know how the drivers work and how to
-configure them as loadable modules, before attempting to compile a
-kernel with the drivers built-in.
+Manual device creation::
-If you built all of your PARIDE support directly into your kernel,
-and you have just a single parallel port IDE device, your kernel should
-locate it automatically for you. If you have more than one device,
-you may need to give some command line options to your bootloader
-(eg: LILO), how to do that is beyond the scope of this document.
+ # echo "port protocol mode unit delay" >/sys/bus/pata_parport/new_device
-The high-level drivers accept a number of command line parameters, all
-of which are documented in the source files in linux/drivers/block/paride.
-By default, each driver will automatically try all parallel ports it
-can find, and all protocol types that have been installed, until it finds
-a parallel port IDE adapter. Once it finds one, the probe stops. So,
-if you have more than one device, you will need to tell the drivers
-how to identify them. This requires specifying the port address, the
-protocol identification number and, for some devices, the drive's
-chain ID. While your system is booting, a number of messages are
-displayed on the console. Like all such messages, they can be
-reviewed with the 'dmesg' command. Among those messages will be
-some lines like::
+where:
- paride: bpck registered as protocol 0
- paride: epat registered as protocol 1
-
-The numbers will always be the same until you build a new kernel with
-different protocol selections. You should note these numbers as you
-will need them to identify the devices.
+ ======== ================================================
+ port parport name (or "auto" for all parports)
+ protocol protocol name (or "auto" for all protocols)
+ mode mode number (protocol-specific) or -1 for probe
+ unit unit number (for backpack only, see below)
+ delay I/O delay (see troubleshooting section below)
+ ======== ================================================
If you happen to be using a MicroSolutions backpack device, you will
also need to know the unit ID number for each drive. This is usually
the last two digits of the drive's serial number (but read MicroSolutions'
documentation about this).
-As an example, let's assume that you have a MicroSolutions PD/CD drive
-with unit ID number 36 connected to the parallel port at 0x378, a SyQuest
-EZ-135 connected to the chained port on the PD/CD drive and also an
-Imation Superdisk connected to port 0x278. You could give the following
-options on your boot command::
+If you omit the parameters from the end, defaults will be used, e.g.:
- pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36
+Probe all parports with all protocols::
-In the last option, pf.drive1 configures device /dev/pf1, the 0x378
-is the parallel port base address, the 0 is the protocol registration
-number and 36 is the chain ID.
+ # echo auto >/sys/bus/pata_parport/new_device
-Please note: while PARIDE will work both with and without the
-PARPORT parallel port sharing system that is included by the
-"Parallel port support" option, PARPORT must be included and enabled
-if you want to use chains of devices on the same parallel port.
+Probe parport0 using protocol epat and mode 4 (EPP-16)::
-2.2 Loading and configuring PARIDE as modules
-----------------------------------------------
+ # echo "parport0 epat 4" >/sys/bus/pata_parport/new_device
-It is much faster and simpler to get to understand the PARIDE drivers
-if you use them as loadable kernel modules.
+Probe parport0 using all protocols::
-Note 1:
- using these drivers with the "kerneld" automatic module loading
- system is not recommended for beginners, and is not documented here.
+ # echo "parport0 auto" >/sys/bus/pata_parport/new_device
-Note 2:
- if you build PARPORT support as a loadable module, PARIDE must
- also be built as loadable modules, and PARPORT must be loaded before
- the PARIDE modules.
+Probe all parports using protoocol epat::
-To use PARIDE, you must begin by::
+ # echo "auto epat" >/sys/bus/pata_parport/new_device
- insmod paride
+Deleting devices::
-this loads a base module which provides a registry for the protocols,
-among other tasks.
-
-Then, load as many of the protocol modules as you think you might need.
-As you load each module, it will register the protocols that it supports,
-and print a log message to your kernel log file and your console. For
-example::
-
- # insmod epat
- paride: epat registered as protocol 0
- # insmod kbic
- paride: k951 registered as protocol 1
- paride: k971 registered as protocol 2
-
-Finally, you can load high-level drivers for each kind of device that
-you have connected. By default, each driver will autoprobe for a single
-device, but you can support up to four similar devices by giving their
-individual coordinates when you load the driver.
-
-For example, if you had two no-name CD-ROM drives both using the
-KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc
-you could give the following command::
-
- # insmod pcd drive0=0x378,1 drive1=0x3bc,1
-
-For most adapters, giving a port address and protocol number is sufficient,
-but check the source files in linux/drivers/block/paride for more
-information. (Hopefully someone will write some man pages one day !).
-
-As another example, here's what happens when PARPORT is installed, and
-a SyQuest EZ-135 is attached to port 0x378::
-
- # insmod paride
- paride: version 1.0 installed
- # insmod epat
- paride: epat registered as protocol 0
- # insmod pd
- pd: pd version 1.0, major 45, cluster 64, nice 0
- pda: Sharing parport1 at 0x378
- pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1
- pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media
- pda: pda1
-
-Note that the last line is the output from the generic partition table
-scanner - in this case it reports that it has found a disk with one partition.
-
-2.3 Using a PARIDE device
---------------------------
-
-Once the drivers have been loaded, you can access PARIDE devices in the
-same way as their traditional counterparts. You will probably need to
-create the device "special files". Here is a simple script that you can
-cut to a file and execute::
-
- #!/bin/bash
- #
- # mkd -- a script to create the device special files for the PARIDE subsystem
- #
- function mkdev {
- mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
- }
- #
- function pd {
- D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
- mkdev pd$D b 45 $[ $1 * 16 ]
- for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
- do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
- done
- }
- #
- cd /dev
- #
- for u in 0 1 2 3 ; do pd $u ; done
- for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done
- for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done
- for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done
- for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done
- for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done
- #
- # end of mkd
-
-With the device files and drivers in place, you can access PARIDE devices
-like any other Linux device. For example, to mount a CD-ROM in pcd0, use::
-
- mount /dev/pcd0 /cdrom
-
-If you have a fresh Avatar Shark cartridge, and the drive is pda, you
-might do something like::
-
- fdisk /dev/pda -- make a new partition table with
- partition 1 of type 83
-
- mke2fs /dev/pda1 -- to build the file system
-
- mkdir /shark -- make a place to mount the disk
-
- mount /dev/pda1 /shark
-
-Devices like the Imation superdisk work in the same way, except that
-they do not have a partition table. For example to make a 120MB
-floppy that you could share with a DOS system::
-
- mkdosfs /dev/pf0
- mount /dev/pf0 /mnt
-
-
-2.4 The pf driver
-------------------
-
-The pf driver is intended for use with parallel port ATAPI disk
-devices. The most common devices in this category are PD drives
-and LS-120 drives. Traditionally, media for these devices are not
-partitioned. Consequently, the pf driver does not support partitioned
-media. This may be changed in a future version of the driver.
-
-2.5 Using the pt driver
-------------------------
-
-The pt driver for parallel port ATAPI tape drives is a minimal driver.
-It does not yet support many of the standard tape ioctl operations.
-For best performance, a block size of 32KB should be used. You will
-probably want to set the parallel port delay to 0, if you can.
-
-2.6 Using the pg driver
-------------------------
-
-The pg driver can be used in conjunction with the cdrecord program
-to create CD-ROMs. Please get cdrecord version 1.6.1 or later
-from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ . To record CD-R media
-your parallel port should ideally be set to EPP mode, and the "port delay"
-should be set to 0. With those settings it is possible to record at 2x
-speed without any buffer underruns. If you cannot get the driver to work
-in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only.
+ # echo pata_parport.0 >/sys/bus/pata_parport/delete_device
3. Troubleshooting
@@ -344,9 +169,9 @@
3.1 Use EPP mode if you can
----------------------------
-The most common problems that people report with the PARIDE drivers
+The most common problems that people report with the pata_parport drivers
concern the parallel port CMOS settings. At this time, none of the
-PARIDE protocol modules support ECP mode, or any ECP combination modes.
+protocol modules support ECP mode, or any ECP combination modes.
If you are able to do so, please set your parallel port into EPP mode
using your CMOS setup procedure.
@@ -354,17 +179,14 @@
-------------------------
Some parallel ports cannot reliably transfer data at full speed. To
-offset the errors, the PARIDE protocol modules introduce a "port
+offset the errors, the protocol modules introduce a "port
delay" between each access to the i/o ports. Each protocol sets
a default value for this delay. In most cases, the user can override
the default and set it to 0 - resulting in somewhat higher transfer
rates. In some rare cases (especially with older 486 systems) the
default delays are not long enough. if you experience corrupt data
transfers, or unexpected failures, you may wish to increase the
-port delay. The delay can be programmed using the "driveN" parameters
-to each of the high-level drivers. Please see the notes above, or
-read the comments at the beginning of the driver source files in
-linux/drivers/block/paride.
+port delay.
3.3 Some drives need a printer reset
-------------------------------------
@@ -374,66 +196,12 @@
drives based on OnSpec and older Freecom adapters. In these rare cases,
the adapter can often be reinitialised by issuing a "printer reset" on
the parallel port. As the reset operation is potentially disruptive in
-multiple device environments, the PARIDE drivers will not do it
+multiple device environments, the pata_parport drivers will not do it
automatically. You can however, force a printer reset by doing::
insmod lp reset=1
rmmod lp
If you have one of these marginal cases, you should probably build
-your paride drivers as modules, and arrange to do the printer reset
-before loading the PARIDE drivers.
-
-3.4 Use the verbose option and dmesg if you need help
-------------------------------------------------------
-
-While a lot of testing has gone into these drivers to make them work
-as smoothly as possible, problems will arise. If you do have problems,
-please check all the obvious things first: does the drive work in
-DOS with the manufacturer's drivers ? If that doesn't yield any useful
-clues, then please make sure that only one drive is hooked to your system,
-and that either (a) PARPORT is enabled or (b) no other device driver
-is using your parallel port (check in /proc/ioports). Then, load the
-appropriate drivers (you can load several protocol modules if you want)
-as in::
-
- # insmod paride
- # insmod epat
- # insmod bpck
- # insmod kbic
- ...
- # insmod pd verbose=1
-
-(using the correct driver for the type of device you have, of course).
-The verbose=1 parameter will cause the drivers to log a trace of their
-activity as they attempt to locate your drive.
-
-Use 'dmesg' to capture a log of all the PARIDE messages (any messages
-beginning with paride:, a protocol module's name or a driver's name) and
-include that with your bug report. You can submit a bug report in one
-of two ways. Either send it directly to the author of the PARIDE suite,
-by e-mail to grant@torque.net, or join the linux-parport mailing list
-and post your report there.
-
-3.5 For more information or help
----------------------------------
-
-You can join the linux-parport mailing list by sending a mail message
-to:
-
- linux-parport-request@torque.net
-
-with the single word::
-
- subscribe
-
-in the body of the mail message (not in the subject line). Please be
-sure that your mail program is correctly set up when you do this, as
-the list manager is a robot that will subscribe you using the reply
-address in your mail headers. REMOVE any anti-spam gimmicks you may
-have in your mail headers, when sending mail to the list server.
-
-You might also find some useful information on the linux-parport
-web pages (although they are not always up to date) at
-
- http://web.archive.org/web/%2E/http://www.torque.net/parport/
+your pata_parport drivers as modules, and arrange to do the printer reset
+before loading the pata_parport drivers.
diff --git a/Documentation/admin-guide/bootconfig.rst b/Documentation/admin-guide/bootconfig.rst
index 9355c52..91339ef 100644
--- a/Documentation/admin-guide/bootconfig.rst
+++ b/Documentation/admin-guide/bootconfig.rst
@@ -201,6 +201,8 @@
Then add "bootconfig" on the normal kernel command line to tell the
kernel to look for the bootconfig at the end of the initrd file.
+Alternatively, build your kernel with the ``CONFIG_BOOT_CONFIG_FORCE``
+Kconfig option selected.
Embedding a Boot Config into Kernel
-----------------------------------
@@ -217,7 +219,9 @@
The kernel will embed it as the default bootconfig.
Just as when attaching the bootconfig to the initrd, you need ``bootconfig``
-option on the kernel command line to enable the embedded bootconfig.
+option on the kernel command line to enable the embedded bootconfig, or,
+alternatively, build your kernel with the ``CONFIG_BOOT_CONFIG_FORCE``
+Kconfig option selected.
Note that even if you set this option, you can override the embedded
bootconfig by another bootconfig which attached to the initrd.
diff --git a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
index 16253ed..dabb80c 100644
--- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
+++ b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
@@ -106,7 +106,7 @@
see Documentation/block/bfq-iosched.rst.
blkio.bfq.weight_device
- Specifes per cgroup per device weights, overriding the default group
+ Specifies per cgroup per device weights, overriding the default group
weight. For more details, see Documentation/block/bfq-iosched.rst.
Following is the format::
diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst
index 27d8949..47d1d7d 100644
--- a/Documentation/admin-guide/cgroup-v1/memory.rst
+++ b/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -87,6 +87,8 @@
memory.swappiness set/show swappiness parameter of vmscan
(See sysctl's vm.swappiness)
memory.move_charge_at_immigrate set/show controls of moving charges
+ This knob is deprecated and shouldn't be
+ used.
memory.oom_control set/show oom controls.
memory.numa_stat show the number of memory usage per numa
node
@@ -727,8 +729,15 @@
.. _cgroup-v1-memory-move-charges:
-8. Move charges at task migration
-=================================
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
Users can move charges associated with a task along with task migration, that
is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 5db4c4d..f67c082 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -624,7 +624,7 @@
Limits
------
-A child can only consume upto the configured amount of the resource.
+A child can only consume up to the configured amount of the resource.
Limits can be over-committed - the sum of the limits of children can
exceed the amount of resource available to the parent.
@@ -642,11 +642,11 @@
Protections
-----------
-A cgroup is protected upto the configured amount of the resource
+A cgroup is protected up to the configured amount of the resource
as long as the usages of all its ancestors are under their
protected levels. Protections can be hard guarantees or best effort
soft boundaries. Protections can also be over-committed in which case
-only upto the amount available to the parent is protected among
+only up to the amount available to the parent is protected among
children.
Protections are in the range [0, max] and defaults to 0, which is
@@ -1079,7 +1079,7 @@
$MAX $PERIOD
- which indicates that the group may consume upto $MAX in each
+ which indicates that the group may consume up to $MAX in each
$PERIOD duration. "max" for $MAX indicates no limit. If only
one number is written, $MAX is updated.
@@ -2289,7 +2289,7 @@
For a valid partition root with the sibling cpu exclusivity
rule enabled, changes made to "cpuset.cpus" that violate the
exclusivity rule will invalidate the partition as well as its
- sibiling partitions with conflicting cpuset.cpus values. So
+ sibling partitions with conflicting cpuset.cpus values. So
care must be taking in changing "cpuset.cpus".
A valid non-root parent partition may distribute out all its CPUs
diff --git a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst
index ed3b8dc..2e151cd 100644
--- a/Documentation/admin-guide/cifs/usage.rst
+++ b/Documentation/admin-guide/cifs/usage.rst
@@ -399,7 +399,7 @@
sep
if first mount option (after the -o), overrides
the comma as the separator between the mount
- parms. e.g.::
+ parameters. e.g.::
-o user=myname,password=mypassword,domain=mydom
@@ -765,7 +765,7 @@
Some debugging statements are not compiled into the
cifs kernel unless CONFIG_CIFS_DEBUG2 is enabled in the
kernel configuration. cifsFYI may be set to one or
- nore of the following flags (7 sets them all)::
+ more of the following flags (7 sets them all)::
+-----------------------------------------------+------+
| log cifs informational messages | 0x01 |
diff --git a/Documentation/admin-guide/device-mapper/cache-policies.rst b/Documentation/admin-guide/device-mapper/cache-policies.rst
index b17fe35..13da4d8 100644
--- a/Documentation/admin-guide/device-mapper/cache-policies.rst
+++ b/Documentation/admin-guide/device-mapper/cache-policies.rst
@@ -70,7 +70,7 @@
cache block).
All this means smq uses ~25bytes per cache block. Still a lot of
-memory, but a substantial improvement nontheless.
+memory, but a substantial improvement nonetheless.
Level balancing
^^^^^^^^^^^^^^^
diff --git a/Documentation/admin-guide/device-mapper/dm-ebs.rst b/Documentation/admin-guide/device-mapper/dm-ebs.rst
index 534fa38..c09f66d 100644
--- a/Documentation/admin-guide/device-mapper/dm-ebs.rst
+++ b/Documentation/admin-guide/device-mapper/dm-ebs.rst
@@ -31,7 +31,7 @@
Optional parameter:
- <underyling sectors>:
+ <underlying sectors>:
Number of sectors defining the logical block size of <dev path>.
2^N supported, e.g. 8 = emulate 8 sectors of 512 bytes = 4KiB.
If not provided, the logical block size of <dev path> will be used.
diff --git a/Documentation/admin-guide/device-mapper/dm-zoned.rst b/Documentation/admin-guide/device-mapper/dm-zoned.rst
index 0fac051..932383f 100644
--- a/Documentation/admin-guide/device-mapper/dm-zoned.rst
+++ b/Documentation/admin-guide/device-mapper/dm-zoned.rst
@@ -46,7 +46,7 @@
The zones of the device(s) are separated into 2 types:
1) Metadata zones: these are conventional zones used to store metadata.
-Metadata zones are not reported as useable capacity to the user.
+Metadata zones are not reported as usable capacity to the user.
2) Data zones: all remaining zones, the vast majority of which will be
sequential zones used exclusively to store user data. The conventional
diff --git a/Documentation/admin-guide/device-mapper/unstriped.rst b/Documentation/admin-guide/device-mapper/unstriped.rst
index 0a8d3eb..5772ccd 100644
--- a/Documentation/admin-guide/device-mapper/unstriped.rst
+++ b/Documentation/admin-guide/device-mapper/unstriped.rst
@@ -35,7 +35,7 @@
This small bash script will setup 4 loop devices and use the existing
striped target to combine the 4 devices into one. It then will use
-the unstriped target ontop of the striped device to access the
+the unstriped target on top of the striped device to access the
individual backing loop devices. We write data to the newly exposed
unstriped devices and verify the data written matches the correct
underlying device on the striped array::
@@ -110,8 +110,8 @@
Example dmsetup usage
=====================
-unstriped ontop of Intel NVMe device that has 2 cores
------------------------------------------------------
+unstriped on top of Intel NVMe device that has 2 cores
+------------------------------------------------------
::
@@ -124,8 +124,8 @@
/dev/mapper/nvmset0
/dev/mapper/nvmset1
-unstriped ontop of striped with 4 drives using 128K chunk size
---------------------------------------------------------------
+unstriped on top of striped with 4 drives using 128K chunk size
+---------------------------------------------------------------
::
diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
index faa22f7..8dc668c 100644
--- a/Documentation/admin-guide/dynamic-debug-howto.rst
+++ b/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -330,7 +330,7 @@
// boot-args example, with newlines and comments for readability
Kernel command line: ...
- // see whats going on in dyndbg=value processing
+ // see what's going on in dyndbg=value processing
dynamic_debug.verbose=3
// enable pr_debugs in the btrfs module (can be builtin or loadable)
btrfs.dyndbg="+p"
diff --git a/Documentation/admin-guide/gpio/gpio-sim.rst b/Documentation/admin-guide/gpio/gpio-sim.rst
index d8a90c8..1cc5567 100644
--- a/Documentation/admin-guide/gpio/gpio-sim.rst
+++ b/Documentation/admin-guide/gpio/gpio-sim.rst
@@ -123,7 +123,7 @@
directory for each exposed line
(e.g. ``/sys/devices/platform/gpio-sim.X/gpiochipY/``). The name of each group
is of the form: ``'sim_gpioX'`` where X is the offset of the line. Inside each
-group there are two attibutes:
+group there are two attributes:
``pull`` - allows to read and set the current simulated pull setting for
every line, when writing the value must be one of: ``'pull-up'``,
diff --git a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst
index 2d19c9f..f491de7 100644
--- a/Documentation/admin-guide/hw-vuln/mds.rst
+++ b/Documentation/admin-guide/hw-vuln/mds.rst
@@ -64,8 +64,8 @@
Attack scenarios
----------------
-Attacks against the MDS vulnerabilities can be mounted from malicious non
-priviledged user space applications running on hosts or guest. Malicious
+Attacks against the MDS vulnerabilities can be mounted from malicious non-
+privileged user space applications running on hosts or guest. Malicious
guest OSes can obviously mount attacks as well.
Contrary to other speculation based vulnerabilities the MDS vulnerability
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index 0571938..0ad7e7e 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -56,6 +56,17 @@
sysfs-rules
+This is the beginning of a section with information of interest to
+application developers and system integrators doing analysis of the
+Linux kernel for safety critical applications. Documents supporting
+analysis of kernel interactions with applications, and key kernel
+subsystems expectations will be found here.
+
+.. toctree::
+ :maxdepth: 1
+
+ workload-tracing
+
The rest of this manual consists of various unordered guides on how to
configure specific aspects of kernel behavior to your liking.
diff --git a/Documentation/admin-guide/kdump/gdbmacros.txt b/Documentation/admin-guide/kdump/gdbmacros.txt
index 82aecdc..030de95 100644
--- a/Documentation/admin-guide/kdump/gdbmacros.txt
+++ b/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -312,10 +312,10 @@
set var $prev_flags = $info->flags
end
- set var $id = ($id + 1) & $id_mask
if ($id == $end_id)
loop_break
end
+ set var $id = ($id + 1) & $id_mask
end
end
document dmesg
diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst
index 959f73a..19600c5 100644
--- a/Documentation/admin-guide/kernel-parameters.rst
+++ b/Documentation/admin-guide/kernel-parameters.rst
@@ -142,7 +142,6 @@
NFS Appropriate NFS support is enabled.
OF Devicetree is enabled.
PV_OPS A paravirtualized kernel is enabled.
- PARIDE The ParIDE (parallel port IDE) subsystem is enabled.
PARISC The PA-RISC architecture is enabled.
PCI PCI bus support is enabled.
PCIE PCI Express support is enabled.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 993f3b6..6221a1d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -378,18 +378,16 @@
autoconf= [IPV6]
See Documentation/networking/ipv6.rst.
- show_lapic= [APIC,X86] Advanced Programmable Interrupt Controller
- Limit apic dumping. The parameter defines the maximal
- number of local apics being dumped. Also it is possible
- to set it to "all" by meaning -- no limit here.
- Format: { 1 (default) | 2 | ... | all }.
- The parameter valid if only apic=debug or
- apic=verbose is specified.
- Example: apic=debug show_lapic=all
-
apm= [APM] Advanced Power Management
See header of arch/x86/kernel/apm_32.c.
+ apparmor= [APPARMOR] Disable or enable AppArmor at boot time
+ Format: { "0" | "1" }
+ See security/apparmor/Kconfig help text
+ 0 -- disable.
+ 1 -- enable.
+ Default value is set via kernel config option.
+
arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
Format: <io>,<irq>,<nodeID>
@@ -480,8 +478,10 @@
See Documentation/block/cmdline-partition.rst
boot_delay= Milliseconds to delay each printk during boot.
- Values larger than 10 seconds (10000) are changed to
- no delay (0).
+ Only works if CONFIG_BOOT_PRINTK_DELAY is enabled,
+ and you may also have to specify "lpj=". Boot_delay
+ values larger than 10 seconds (10000) are assumed
+ erroneous and ignored.
Format: integer
bootconfig [KNL]
@@ -557,6 +557,7 @@
Format: <string>
nosocket -- Disable socket memory accounting.
nokmem -- Disable kernel memory accounting.
+ nobpf -- Disable BPF memory accounting.
checkreqprot= [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
@@ -672,7 +673,7 @@
Sets the size of kernel per-numa memory area for
contiguous memory allocations. A value of 0 disables
per-numa CMA altogether. And If this option is not
- specificed, the default value is 0.
+ specified, the default value is 0.
With per-numa CMA enabled, DMA users on node nid will
first try to allocate buffer from the pernuma area
which is located in node nid, if the allocation fails,
@@ -944,7 +945,7 @@
driver code when a CPU writes to (or reads from) a
random memory location. Note that there exists a class
of memory corruptions problems caused by buggy H/W or
- F/W or by drivers badly programing DMA (basically when
+ F/W or by drivers badly programming DMA (basically when
memory is written at bus level and the CPU MMU is
bypassed) which are not detectable by
CONFIG_DEBUG_PAGEALLOC, hence this option will not help
@@ -1045,26 +1046,12 @@
can be useful when debugging issues that require an SLB
miss to occur.
- stress_slb [PPC]
- Limits the number of kernel SLB entries, and flushes
- them frequently to increase the rate of SLB faults
- on kernel addresses.
-
- stress_hpt [PPC]
- Limits the number of kernel HPT entries in the hash
- page table to increase the rate of hash page table
- faults on kernel addresses.
-
disable= [IPV6]
See Documentation/networking/ipv6.rst.
disable_radix [PPC]
Disable RADIX MMU mode on POWER9
- radix_hcall_invalidate=on [PPC/PSERIES]
- Disable RADIX GTSE feature and use hcall for TLB
- invalidate.
-
disable_tlbie [PPC]
Disable TLBIE instruction. Currently does not work
with KVM, with HASH MMU, or with coherent accelerators.
@@ -1166,16 +1153,6 @@
Documentation/admin-guide/dynamic-debug-howto.rst
for details.
- nopku [X86] Disable Memory Protection Keys CPU feature found
- in some Intel CPUs.
-
- <module>.async_probe[=<bool>] [KNL]
- If no <bool> value is specified or if the value
- specified is not a valid <bool>, enable asynchronous
- probe on this module. Otherwise, enable/disable
- asynchronous probe on this module as indicated by the
- <bool> value. See also: module.async_probe
-
early_ioremap_debug [KNL]
Enable debug messages in early_ioremap support. This
is useful for tracking down temporary early mappings
@@ -1195,10 +1172,10 @@
specified, the serial port must already be setup and
configured.
- uart[8250],io,<addr>[,options]
- uart[8250],mmio,<addr>[,options]
- uart[8250],mmio32,<addr>[,options]
- uart[8250],mmio32be,<addr>[,options]
+ uart[8250],io,<addr>[,options[,uartclk]]
+ uart[8250],mmio,<addr>[,options[,uartclk]]
+ uart[8250],mmio32,<addr>[,options[,uartclk]]
+ uart[8250],mmio32be,<addr>[,options[,uartclk]]
uart[8250],0x<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
@@ -1207,7 +1184,9 @@
If none of [io|mmio|mmio32|mmio32be], <addr> is assumed
to be equivalent to 'mmio'. 'options' are specified
in the same format described for "console=ttyS<n>"; if
- unspecified, the h/w is not initialized.
+ unspecified, the h/w is not initialized. 'uartclk' is
+ the uart clock frequency; if unspecified, it is set
+ to 'BASE_BAUD' * 16.
pl011,<addr>
pl011,mmio32,<addr>
@@ -1532,6 +1511,15 @@
boot up that is likely to be overridden by user space
start up functionality.
+ Optionally, the snapshot can also be defined for a tracing
+ instance that was created by the trace_instance= command
+ line parameter.
+
+ trace_instance=foo,sched_switch ftrace_boot_snapshot=foo
+
+ The above will cause the "foo" tracing instance to trigger
+ a snapshot at the end of boot up.
+
ftrace_dump_on_oops[=orig_cpu]
[FTRACE] will dump the trace buffers on oops.
If no parameter is passed, ftrace will dump
@@ -1752,7 +1740,7 @@
boot-time allocation of gigantic hugepages is skipped.
hugetlb_free_vmemmap=
- [KNL] Reguires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
+ [KNL] Requires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
enabled.
Control if HugeTLB Vmemmap Optimization (HVO) is enabled.
Allows heavy hugetlb users to free up some more
@@ -1791,12 +1779,6 @@
which allow the hypervisor to 'idle' the
guest on lock contention.
- keep_bootcon [KNL]
- Do not unregister boot console at start. This is only
- useful for debugging when something happens in the window
- between unregistering the boot console and initializing
- the real console.
-
i2c_bus= [HW] Override the default board specific I2C bus speed
or register an additional I2C bus that is not
registered from board initialization code.
@@ -2366,17 +2348,18 @@
js= [HW,JOY] Analog joystick
See Documentation/input/joydev/joystick.rst.
- nokaslr [KNL]
- When CONFIG_RANDOMIZE_BASE is set, this disables
- kernel and module base offset ASLR (Address Space
- Layout Randomization).
-
kasan_multi_shot
[KNL] Enforce KASAN (Kernel Address Sanitizer) to print
report on every invalid memory access. Without this
parameter KASAN will print report only for the first
invalid access.
+ keep_bootcon [KNL]
+ Do not unregister boot console at start. This is only
+ useful for debugging when something happens in the window
+ between unregistering the boot console and initializing
+ the real console.
+
keepinitrd [HW,ARM]
kernelcore= [KNL,X86,IA-64,PPC]
@@ -2553,9 +2536,14 @@
protected: nVHE-based mode with support for guests whose
state is kept private from the host.
+ nested: VHE-based mode with support for nested
+ virtualization. Requires at least ARMv8.3
+ hardware.
+
Defaults to VHE/nVHE based on hardware support. Setting
mode to "protected" will disable kexec and hibernation
- for the host.
+ for the host. "nested" is experimental and should be
+ used with extreme caution.
kvm-arm.vgic_v3_group0_trap=
[KVM,ARM] Trap guest accesses to GICv3 group-0
@@ -2816,6 +2804,9 @@
* [no]setxfer: Indicate if transfer speed mode setting
should be skipped.
+ * [no]fua: Disable or enable FUA (Force Unit Access)
+ support for devices supporting this feature.
+
* dump_id: Dump IDENTIFY data.
* disable: Disable this device.
@@ -3325,6 +3316,13 @@
For details see:
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+ <module>.async_probe[=<bool>] [KNL]
+ If no <bool> value is specified or if the value
+ specified is not a valid <bool>, enable asynchronous
+ probe on this module. Otherwise, enable/disable
+ asynchronous probe on this module as indicated by the
+ <bool> value. See also: module.async_probe
+
module.async_probe=<bool>
[KNL] When set to true, modules will use async probing
by default. To enable/disable async probing for a
@@ -3708,7 +3706,7 @@
implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
to be effective. This is useful on platforms where the
sleep(SH) or wfi(ARM,ARM64) instructions do not work
- correctly or when doing power measurements to evalute
+ correctly or when doing power measurements to evaluate
the impact of the sleep instructions. This is also
useful when using JTAG debugger.
@@ -3779,6 +3777,11 @@
nojitter [IA-64] Disables jitter checking for ITC timers.
+ nokaslr [KNL]
+ When CONFIG_RANDOMIZE_BASE is set, this disables
+ kernel and module base offset ASLR (Address Space
+ Layout Randomization).
+
no-kvmclock [X86,KVM] Disable paravirtualized KVM clock driver
no-kvmapf [X86,KVM] Disable paravirtualized asynchronous page
@@ -3824,6 +3827,19 @@
nopcid [X86-64] Disable the PCID cpu feature.
+ nopku [X86] Disable Memory Protection Keys CPU feature found
+ in some Intel CPUs.
+
+ nopv= [X86,XEN,KVM,HYPER_V,VMWARE]
+ Disables the PV optimizations forcing the guest to run
+ as generic guest with no PV drivers. Currently support
+ XEN HVM, KVM, HYPER_V and VMWARE guest.
+
+ nopvspin [X86,XEN,KVM]
+ Disables the qspinlock slow path using PV optimizations
+ which allow the hypervisor to 'idle' the guest on lock
+ contention.
+
norandmaps Don't use address space randomization. Equivalent to
echo 0 > /proc/sys/kernel/randomize_va_space
@@ -4117,10 +4133,6 @@
pcbit= [HW,ISDN]
- pcd. [PARIDE]
- See header of drivers/block/paride/pcd.c.
- See also Documentation/admin-guide/blockdev/paride.rst.
-
pci=option[,option...] [PCI] various PCI subsystem options.
Some options herein operate on a specific device
@@ -4296,7 +4308,9 @@
specified, e.g., 12@pci:8086:9c22:103c:198f
for 4096-byte alignment.
ecrc= Enable/disable PCIe ECRC (transaction layer
- end-to-end CRC checking).
+ end-to-end CRC checking). Only effective if
+ OS has native AER control (either granted by
+ ACPI _OSC or forced via "pcie_ports=native")
bios: Use BIOS/firmware settings. This is the
the default.
off: Turn ECRC off
@@ -4383,9 +4397,6 @@
for debug and development, but should not be
needed on a platform with proper driver support.
- pd. [PARIDE]
- See Documentation/admin-guide/blockdev/paride.rst.
-
pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at
boot time.
Format: { 0 | 1 }
@@ -4398,12 +4409,6 @@
allocator. This parameter is primarily for debugging
and performance comparison.
- pf. [PARIDE]
- See Documentation/admin-guide/blockdev/paride.rst.
-
- pg. [PARIDE]
- See Documentation/admin-guide/blockdev/paride.rst.
-
pirq= [SMP,APIC] Manual mp-table setup
See Documentation/x86/i386/IO-APIC.rst.
@@ -4565,9 +4570,6 @@
pstore.backend= Specify the name of the pstore backend to use
- pt. [PARIDE]
- See Documentation/admin-guide/blockdev/paride.rst.
-
pti= [X86-64] Control Page Table Isolation of user and
kernel address spaces. Disabling this feature
removes hardening, but improves performance of
@@ -4591,6 +4593,10 @@
r128= [HW,DRM]
+ radix_hcall_invalidate=on [PPC/PSERIES]
+ Disable RADIX GTSE feature and use hcall for TLB
+ invalidate.
+
raid= [HW,RAID]
See Documentation/admin-guide/md.rst.
@@ -5583,13 +5589,6 @@
1 -- enable.
Default value is 1.
- apparmor= [APPARMOR] Disable or enable AppArmor at boot time
- Format: { "0" | "1" }
- See security/apparmor/Kconfig help text
- 0 -- disable.
- 1 -- enable.
- Default value is set via kernel config option.
-
serialnumber [BUGS=X86-32]
sev=option[,option...] [X86-64] See Documentation/x86/x86_64/boot-options.rst
@@ -5597,6 +5596,15 @@
shapers= [NET]
Maximal number of shapers.
+ show_lapic= [APIC,X86] Advanced Programmable Interrupt Controller
+ Limit apic dumping. The parameter defines the maximal
+ number of local apics being dumped. Also it is possible
+ to set it to "all" by meaning -- no limit here.
+ Format: { 1 (default) | 2 | ... | all }.
+ The parameter valid if only apic=debug or
+ apic=verbose is specified.
+ Example: apic=debug show_lapic=all
+
simeth= [IA-64]
simscsi=
@@ -6036,6 +6044,16 @@
be used to filter out binaries which have
not yet been made aware of AT_MINSIGSTKSZ.
+ stress_hpt [PPC]
+ Limits the number of kernel HPT entries in the hash
+ page table to increase the rate of hash page table
+ faults on kernel addresses.
+
+ stress_slb [PPC]
+ Limits the number of kernel SLB entries, and flushes
+ them frequently to increase the rate of SLB faults
+ on kernel addresses.
+
sunrpc.min_resvport=
sunrpc.max_resvport=
[NFS,SUNRPC]
@@ -6283,13 +6301,33 @@
comma-separated list of trace events to enable. See
also Documentation/trace/events.rst
+ trace_instance=[instance-info]
+ [FTRACE] Create a ring buffer instance early in boot up.
+ This will be listed in:
+
+ /sys/kernel/tracing/instances
+
+ Events can be enabled at the time the instance is created
+ via:
+
+ trace_instance=<name>,<system1>:<event1>,<system2>:<event2>
+
+ Note, the "<system*>:" portion is optional if the event is
+ unique.
+
+ trace_instance=foo,sched:sched_switch,irq_handler_entry,initcall
+
+ will enable the "sched_switch" event (note, the "sched:" is optional, and
+ the same thing would happen if it was left off). The irq_handler_entry
+ event, and all events under the "initcall" system.
+
trace_options=[option-list]
[FTRACE] Enable or disable tracer options at boot.
The option-list is a comma delimited list of options
that can be enabled or disabled just as if you were
to echo the option name into
- /sys/kernel/debug/tracing/trace_options
+ /sys/kernel/tracing/trace_options
For example, to enable stacktrace option (to dump the
stack trace of each event), add to the command line:
@@ -6322,7 +6360,7 @@
[FTRACE] enable this option to disable tracing when a
warning is hit. This turns off "tracing_on". Tracing can
be enabled again by echoing '1' into the "tracing_on"
- file located in /sys/kernel/debug/tracing/
+ file located in /sys/kernel/tracing/
This option is useful, as it disables the trace before
the WARNING dump is called, which prevents the trace to
@@ -6777,11 +6815,11 @@
functions are at fixed addresses, they make nice
targets for exploits that can control RIP.
- emulate [default] Vsyscalls turn into traps and are
- emulated reasonably safely. The vsyscall
- page is readable.
+ emulate Vsyscalls turn into traps and are emulated
+ reasonably safely. The vsyscall page is
+ readable.
- xonly Vsyscalls turn into traps and are
+ xonly [default] Vsyscalls turn into traps and are
emulated reasonably safely. The vsyscall
page is not readable.
@@ -6978,16 +7016,6 @@
fairer and the number of possible event channels is
much higher. Default is on (use fifo events).
- nopv= [X86,XEN,KVM,HYPER_V,VMWARE]
- Disables the PV optimizations forcing the guest to run
- as generic guest with no PV drivers. Currently support
- XEN HVM, KVM, HYPER_V and VMWARE guest.
-
- nopvspin [X86,XEN,KVM]
- Disables the qspinlock slow path using PV optimizations
- which allow the hypervisor to 'idle' the guest on lock
- contention.
-
xirc2ps_cs= [NET,PCMCIA]
Format:
<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
index e4a5fc2..993c2a0 100644
--- a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
+++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
@@ -25,7 +25,7 @@
- In order to locate kernel-generated OS jitter on CPU N:
- cd /sys/kernel/debug/tracing
+ cd /sys/kernel/tracing
echo 1 > max_graph_depth # Increase the "1" for more detail
echo function_graph > current_tracer
# run workload
diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 475eb0e..e27a1c3 100644
--- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -1488,7 +1488,7 @@
Text corresponding to keyboard layout to be set in sysfs are: be(Belgian),
cz(Czech), da(Danish), de(German), en(English), es(Spain), et(Estonian),
fr(French), fr-ch(French(Switzerland)), hu(Hungarian), it(Italy), jp (Japan),
-nl(Dutch), nn(Norway), pl(Polish), pt(portugese), sl(Slovenian), sv(Sweden),
+nl(Dutch), nn(Norway), pl(Polish), pt(portuguese), sl(Slovenian), sv(Sweden),
tr(Turkey)
WWAN Antenna type
diff --git a/Documentation/admin-guide/md.rst b/Documentation/admin-guide/md.rst
index d8fc9a5..4ff2cc2 100644
--- a/Documentation/admin-guide/md.rst
+++ b/Documentation/admin-guide/md.rst
@@ -317,7 +317,7 @@
suspended (not supported yet)
All IO requests will block. The array can be reconfigured.
- Writing this, if accepted, will block until array is quiessent
+ Writing this, if accepted, will block until array is quiescent
readonly
no resync can happen. no superblocks get written.
diff --git a/Documentation/admin-guide/media/bttv.rst b/Documentation/admin-guide/media/bttv.rst
index 125f6f4..58cbaf6 100644
--- a/Documentation/admin-guide/media/bttv.rst
+++ b/Documentation/admin-guide/media/bttv.rst
@@ -909,7 +909,7 @@
- TVPhone98 (Bt878)
- AVerTV und TVCapture98 w/VCR (Bt 878)
- AVerTVStudio und TVPhone98 w/VCR (Bt878)
- - AVerTV GO Serie (Kein SVideo Input)
+ - AVerTV GO Series (Kein SVideo Input)
- AVerTV98 (BT-878 chip)
- AVerTV98 mit Fernbedienung (BT-878 chip)
- AVerTV/FM98 (BT-878 chip)
diff --git a/Documentation/admin-guide/media/building.rst b/Documentation/admin-guide/media/building.rst
index 2d660b7..a064734 100644
--- a/Documentation/admin-guide/media/building.rst
+++ b/Documentation/admin-guide/media/building.rst
@@ -137,7 +137,7 @@
from remote controllers.
The ``Support for eBPF programs attached to lirc devices`` option allows
-the usage of special programs (called eBPF) that would allow aplications
+the usage of special programs (called eBPF) that would allow applications
to add extra remote controller decoding functionality to the Linux Kernel.
The ``Remote controller decoders`` option allows selecting the
diff --git a/Documentation/admin-guide/media/cec.rst b/Documentation/admin-guide/media/cec.rst
index 5c72593..14ec3ff 100644
--- a/Documentation/admin-guide/media/cec.rst
+++ b/Documentation/admin-guide/media/cec.rst
@@ -340,14 +340,14 @@
This kernel patch will hook up the cec-gpio driver correctly to
e.g. ``arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts``::
- cec-gpio@7 {
+ cec@7 {
compatible = "cec-gpio";
cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
- cec-gpio@8 {
+ cec@8 {
compatible = "cec-gpio";
cec-gpios = <&gpio 8 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
hpd-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/admin-guide/media/cpia2.rst b/Documentation/admin-guide/media/cpia2.rst
deleted file mode 100644
index f6ffef6..0000000
--- a/Documentation/admin-guide/media/cpia2.rst
+++ /dev/null
@@ -1,145 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The cpia2 driver
-================
-
-Authors: Peter Pregler <Peter_Pregler@email.com>,
-Scott J. Bertin <scottbertin@yahoo.com>, and
-Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which
-this one was modelled from.
-
-Introduction
-------------
-
-This is a driver for STMicroelectronics's CPiA2 (second generation
-Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG
-stream at up to vga size. It implements the Video4Linux interface as much as
-possible. Since the V4L interface does not support compressed formats, only
-an mjpeg enabled application can be used with the camera. We have modified the
-gqcam application to view this stream.
-
-The driver is implemented as two kernel modules. The cpia2 module
-contains the camera functions and the V4L interface. The cpia2_usb module
-contains usb specific functions. The main reason for this was the size of the
-module was getting out of hand, so I separated them. It is not likely that
-there will be a parallel port version.
-
-Features
---------
-
-- Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos
- sensors. I only have the vga sensor, so can't test the other.
-- Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between.
- VGA and QVGA are the native image sizes for the VGA camera. CIF is done
- in the coprocessor by scaling QVGA. All other sizes are done by clipping.
-- Palette: YCrCb, compressed with MJPEG.
-- Some compression parameters are settable.
-- Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA).
-- Adjust brightness, color, contrast while streaming.
-- Flicker control settable for 50 or 60 Hz mains frequency.
-
-Making and installing the stv672 driver modules
------------------------------------------------
-
-Requirements
-~~~~~~~~~~~~
-
-Video4Linux must be either compiled into the kernel or
-available as a module. Video4Linux2 is automatically detected and made
-available at compile time.
-
-Setup
-~~~~~
-
-Use ``modprobe cpia2`` to load and ``modprobe -r cpia2`` to unload. This
-may be done automatically by your distribution.
-
-Driver options
-~~~~~~~~~~~~~~
-
-.. tabularcolumns:: |p{13ex}|L|
-
-
-============== ========================================================
-Option Description
-============== ========================================================
-video_nr video device to register (0=/dev/video0, etc)
- range -1 to 64. default is -1 (first available)
- If you have more than 1 camera, this MUST be -1.
-buffer_size Size for each frame buffer in bytes (default 68k)
-num_buffers Number of frame buffers (1-32, default 3)
-alternate USB Alternate (2-7, default 7)
-flicker_freq Frequency for flicker reduction(50 or 60, default 60)
-flicker_mode 0 to disable, or 1 to enable flicker reduction.
- (default 0). This is only effective if the camera
- uses a stv0672 coprocessor.
-============== ========================================================
-
-Setting the options
-~~~~~~~~~~~~~~~~~~~
-
-If you are using modules, edit /etc/modules.conf and add an options
-line like this::
-
- options cpia2 num_buffers=3 buffer_size=65535
-
-If the driver is compiled into the kernel, at boot time specify them
-like this::
-
- cpia2.num_buffers=3 cpia2.buffer_size=65535
-
-What buffer size should I use?
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The maximum image size depends on the alternate you choose, and the
-frame rate achieved by the camera. If the compression engine is able to
-keep up with the frame rate, the maximum image size is given by the table
-below.
-
-The compression engine starts out at maximum compression, and will
-increase image quality until it is close to the size in the table. As long
-as the compression engine can keep up with the frame rate, after a short time
-the images will all be about the size in the table, regardless of resolution.
-
-At low alternate settings, the compression engine may not be able to
-compress the image enough and will reduce the frame rate by producing larger
-images.
-
-The default of 68k should be good for most users. This will handle
-any alternate at frame rates down to 15fps. For lower frame rates, it may
-be necessary to increase the buffer size to avoid having frames dropped due
-to insufficient space.
-
-========== ========== ======== =====
-Alternate bytes/ms 15fps 30fps
-========== ========== ======== =====
- 2 128 8533 4267
- 3 384 25600 12800
- 4 640 42667 21333
- 5 768 51200 25600
- 6 896 59733 29867
- 7 1023 68200 34100
-========== ========== ======== =====
-
-Table: Image size(bytes)
-
-
-How many buffers should I use?
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-For normal streaming, 3 should give the best results. With only 2,
-it is possible for the camera to finish sending one image just after a
-program has started reading the other. If this happens, the driver must drop
-a frame. The exception to this is if you have a heavily loaded machine. In
-this case use 2 buffers. You are probably not reading at the full frame rate.
-If the camera can send multiple images before a read finishes, it could
-overwrite the third buffer before the read finishes, leading to a corrupt
-image. Single and double buffering have extra checks to avoid overwriting.
-
-Using the camera
-~~~~~~~~~~~~~~~~
-
-We are providing a modified gqcam application to view the output. In
-order to avoid confusion, here it is called mview. There is also the qx5view
-program which can also control the lights on the qx5 microscope. MJPEG Tools
-(http://mjpeg.sourceforge.net) can also be used to record from the camera.
diff --git a/Documentation/admin-guide/media/dvb-drivers.rst b/Documentation/admin-guide/media/dvb-drivers.rst
index 8df637c..66fa4ed 100644
--- a/Documentation/admin-guide/media/dvb-drivers.rst
+++ b/Documentation/admin-guide/media/dvb-drivers.rst
@@ -13,4 +13,3 @@
opera-firmware
technisat
ttusb-dec
- zr364xx
diff --git a/Documentation/admin-guide/media/meye.rst b/Documentation/admin-guide/media/meye.rst
deleted file mode 100644
index 9098a1e..0000000
--- a/Documentation/admin-guide/media/meye.rst
+++ /dev/null
@@ -1,93 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-Vaio Picturebook Motion Eye Camera Driver
-=========================================
-
-Copyright |copy| 2001-2004 Stelian Pop <stelian@popies.net>
-
-Copyright |copy| 2001-2002 Alcôve <www.alcove.com>
-
-Copyright |copy| 2000 Andrew Tridgell <tridge@samba.org>
-
-This driver enable the use of video4linux compatible applications with the
-Motion Eye camera. This driver requires the "Sony Laptop Extras" driver (which
-can be found in the "Misc devices" section of the kernel configuration utility)
-to be compiled and installed (using its "camera=1" parameter).
-
-It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480.
-
-Grabbing is supported in packed YUV colorspace only.
-
-MJPEG hardware grabbing is supported via a private API (see below).
-
-Hardware supported
-------------------
-
-This driver supports the 'second' version of the MotionEye camera :)
-
-The first version was connected directly on the video bus of the Neomagic
-video card and is unsupported.
-
-The second one, made by Kawasaki Steel is fully supported by this
-driver (PCI vendor/device is 0x136b/0xff01)
-
-The third one, present in recent (more or less last year) Picturebooks
-(C1M* models), is not supported. The manufacturer has given the specs
-to the developers under a NDA (which allows the development of a GPL
-driver however), but things are not moving very fast (see
-http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011).
-
-There is a forth model connected on the USB bus in TR1* Vaio laptops.
-This camera is not supported at all by the current driver, in fact
-little information if any is available for this camera
-(USB vendor/device is 0x054c/0x0107).
-
-Driver options
---------------
-
-Several options can be passed to the meye driver using the standard
-module argument syntax (<param>=<value> when passing the option to the
-module or meye.<param>=<value> on the kernel boot line when meye is
-statically linked into the kernel). Those options are:
-
-.. code-block:: none
-
- gbuffers: number of capture buffers, default is 2 (32 max)
-
- gbufsize: size of each capture buffer, default is 614400
-
- video_nr: video device to register (0 = /dev/video0, etc)
-
-Module use
-----------
-
-In order to automatically load the meye module on use, you can put those lines
-in your /etc/modprobe.d/meye.conf file:
-
-.. code-block:: none
-
- alias char-major-81 videodev
- alias char-major-81-0 meye
- options meye gbuffers=32
-
-Usage:
-------
-
-.. code-block:: none
-
- xawtv >= 3.49 (<http://bytesex.org/xawtv/>)
- for display and uncompressed video capture:
-
- xawtv -c /dev/video0 -geometry 640x480
- or
- xawtv -c /dev/video0 -geometry 320x240
-
- motioneye (<http://popies.net/meye/>)
- for getting ppm or jpg snapshots, mjpeg video
-
-Bugs / Todo
------------
-
-- 'motioneye' still uses the meye private v4l1 API extensions.
diff --git a/Documentation/admin-guide/media/other-usb-cardlist.rst b/Documentation/admin-guide/media/other-usb-cardlist.rst
index bbfdb13..fb88db5 100644
--- a/Documentation/admin-guide/media/other-usb-cardlist.rst
+++ b/Documentation/admin-guide/media/other-usb-cardlist.rst
@@ -14,8 +14,6 @@
dvb-as102 Sky IT Digital Key (green led) 2137:0001
b2c2-flexcop-usb Technisat/B2C2 FlexCop II/IIb/III 0af7:0101
Digital TV
-cpia2 Vision's CPiA2 cameras 0553:0100, 0553:0140,
- such as the Digital Blue QX5 0553:0151
go7007 WIS GO7007 MPEG encoder 1943:a250, 093b:a002,
093b:a004, 0eb1:6666,
0eb1:6668
@@ -66,7 +64,6 @@
pwc Visionite VCS-UM100 0d81:1910
s2255drv Sensoray 2255 1943:2255, 1943:2257
stk1160 STK1160 USB video capture dongle 05e1:0408
-stkwebcam Syntek DC1125 174f:a311, 05e1:0501
dvb-ttusb-budget Technotrend/Hauppauge Nova-USB devices 0b48:1003, 0b48:1004,
0b48:1005
dvb-ttusb_dec Technotrend/Hauppauge MPEG decoder 0b48:1006
@@ -78,15 +75,4 @@
DEC2540-t 0b48:1009
usbtv Fushicai USBTV007 Audio-Video Grabber 1b71:3002, 1f71:3301,
1f71:3306
-zr364xx USB ZR364XX Camera 08ca:0109, 041e:4024,
- 0d64:0108, 0546:3187,
- 0d64:3108, 0595:4343,
- 0bb0:500d, 0feb:2004,
- 055f:b500, 08ca:2062,
- 052b:1a18, 04c8:0729,
- 04f2:a208, 0784:0040,
- 06d6:0034, 0a17:0062,
- 06d6:003b, 0a17:004e,
- 041e:405d, 08ca:2102,
- 06d6:003d
================ ====================================== =====================
diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst
index f4d670e6..42528795d 100644
--- a/Documentation/admin-guide/media/pci-cardlist.rst
+++ b/Documentation/admin-guide/media/pci-cardlist.rst
@@ -77,7 +77,6 @@
ivtv Conexant cx23416/cx23415 MPEG encoder/decoder
ivtvfb Conexant cx23415 framebuffer
mantis MANTIS based cards
-meye Sony Vaio Picturebook Motion Eye
mxb Siemens-Nixdorf 'Multimedia eXtension Board'
netup-unidvb NetUP Universal DVB card
ngene Micronas nGene
diff --git a/Documentation/admin-guide/media/platform-cardlist.rst b/Documentation/admin-guide/media/platform-cardlist.rst
index 8ef57cd..1230ae4 100644
--- a/Documentation/admin-guide/media/platform-cardlist.rst
+++ b/Documentation/admin-guide/media/platform-cardlist.rst
@@ -30,7 +30,6 @@
exynos-fimc-lite EXYNOS FIMC-LITE camera interface
exynos-gsc Samsung Exynos G-Scaler
exy Samsung S5P/EXYNOS4 SoC series Camera Subsystem
-fsl-viu Freescale VIU
imx-pxp i.MX Pixel Pipeline (PXP)
isdf TI DM365 ISIF video capture
mmp_camera Marvell Armada 610 integrated camera controller
diff --git a/Documentation/admin-guide/media/si476x.rst b/Documentation/admin-guide/media/si476x.rst
index 8706230..c8882ee 100644
--- a/Documentation/admin-guide/media/si476x.rst
+++ b/Documentation/admin-guide/media/si476x.rst
@@ -142,7 +142,7 @@
indicator
0x18 lassi Signed Low side adjacent Channel
Strength indicator
- 0x19 hassi ditto fpr High side
+ 0x19 hassi ditto for High side
0x20 mult Multipath indicator
0x21 dev Frequency deviation
0x24 assi Adjacent channel SSI
diff --git a/Documentation/admin-guide/media/tm6000-cardlist.rst b/Documentation/admin-guide/media/tm6000-cardlist.rst
deleted file mode 100644
index 6d2769c..0000000
--- a/Documentation/admin-guide/media/tm6000-cardlist.rst
+++ /dev/null
@@ -1,83 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-TM6000 cards list
-=================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
- :header-rows: 1
- :widths: 2 19 18
- :stub-columns: 0
-
- * - Card number
- - Card name
- - USB IDs
-
- * - 0
- - Unknown tm6000 video grabber
- -
-
- * - 1
- - Generic tm5600 board
- - 6000:0001
-
- * - 2
- - Generic tm6000 board
- -
-
- * - 3
- - Generic tm6010 board
- - 6000:0002
-
- * - 4
- - 10Moons UT 821
- -
-
- * - 5
- - 10Moons UT 330
- -
-
- * - 6
- - ADSTECH Dual TV USB
- - 06e1:f332
-
- * - 7
- - Freecom Hybrid Stick / Moka DVB-T Receiver Dual
- - 14aa:0620
-
- * - 8
- - ADSTECH Mini Dual TV USB
- - 06e1:b339
-
- * - 9
- - Hauppauge WinTV HVR-900H / WinTV USB2-Stick
- - 2040:6600, 2040:6601, 2040:6610, 2040:6611
-
- * - 10
- - Beholder Wander DVB-T/TV/FM USB2.0
- - 6000:dec0
-
- * - 11
- - Beholder Voyager TV/FM USB2.0
- - 6000:dec1
-
- * - 12
- - Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick
- - 0ccd:0086, 0ccd:00A5
-
- * - 13
- - Twinhan TU501(704D1)
- - 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264
-
- * - 14
- - Beholder Wander Lite DVB-T/TV/FM USB2.0
- - 6000:dec2
-
- * - 15
- - Beholder Voyager Lite TV/FM USB2.0
- - 6000:dec3
-
- * - 16
- - Terratec Grabster AV 150/250 MX
- - 0ccd:0079
diff --git a/Documentation/admin-guide/media/usb-cardlist.rst b/Documentation/admin-guide/media/usb-cardlist.rst
index 1e96f92..5f5ab07 100644
--- a/Documentation/admin-guide/media/usb-cardlist.rst
+++ b/Documentation/admin-guide/media/usb-cardlist.rst
@@ -43,7 +43,6 @@
airspy AirSpy
au0828 Auvitek AU0828
b2c2-flexcop-usb Technisat/B2C2 Air/Sky/Cable2PC USB
-cpia2 CPiA2 Video For Linux
cx231xx Conexant cx231xx USB video capture
dvb-as102 Abilis AS102 DVB receiver
dvb-ttusb-budget Technotrend/Hauppauge Nova - USB devices
@@ -93,15 +92,10 @@
s2250 Sensoray 2250/2251
s2255drv USB Sensoray 2255 video capture device
smsusb Siano SMS1xxx based MDTV receiver
-stkwebcam USB Syntek DC1125 Camera
-tm6000-alsa TV Master TM5600/6000/6010 audio
-tm6000-dvb DVB Support for tm6000 based TV cards
-tm6000 TV Master TM5600/6000/6010 driver
ttusb_dec Technotrend/Hauppauge USB DEC devices
usbtv USBTV007 video capture
uvcvideo USB Video Class (UVC)
zd1301 ZyDAS ZD1301
-zr364xx USB ZR364XX Camera
====================== =========================================================
.. toctree::
@@ -110,7 +104,6 @@
au0828-cardlist
cx231xx-cardlist
em28xx-cardlist
- tm6000-cardlist
siano-cardlist
gspca-cardlist
diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
index 734e18c..1c41f87 100644
--- a/Documentation/admin-guide/media/v4l-drivers.rst
+++ b/Documentation/admin-guide/media/v4l-drivers.rst
@@ -11,14 +11,12 @@
bttv
cafe_ccic
- cpia2
cx88
fimc
imx
imx7
ipu3
ivtv
- meye
omap3isp
omap4_camera
philips
diff --git a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst
index 672a837..58ac25b 100644
--- a/Documentation/admin-guide/media/vivid.rst
+++ b/Documentation/admin-guide/media/vivid.rst
@@ -580,7 +580,7 @@
----------------
The Metadata capture generates UVC format metadata. The PTS and SCR are
-transmitted based on the values set in vivid contols.
+transmitted based on the values set in vivid controls.
The Metadata device will only work for the Webcam input, it will give
back an error for all other inputs.
diff --git a/Documentation/admin-guide/media/zr364xx.rst b/Documentation/admin-guide/media/zr364xx.rst
deleted file mode 100644
index 7291e54..0000000
--- a/Documentation/admin-guide/media/zr364xx.rst
+++ /dev/null
@@ -1,102 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Zoran 364xx based USB webcam module
-===================================
-
-site: http://royale.zerezo.com/zr364xx/
-
-mail: royale@zerezo.com
-
-
-Introduction
-------------
-
-
-This brings support under Linux for the Aiptek PocketDV 3300 and similar
-devices in webcam mode. If you just want to get on your PC the pictures
-and movies on the camera, you should use the usb-storage module instead.
-
-The driver works with several other cameras in webcam mode (see the list
-below).
-
-Possible chipsets are : ZR36430 (ZR36430BGC) and
-maybe ZR36431, ZR36440, ZR36442...
-
-You can try the experience changing the vendor/product ID values (look
-at the source code).
-
-You can get these values by looking at /var/log/messages when you plug
-your camera, or by typing : cat /sys/kernel/debug/usb/devices.
-
-
-Install
--------
-
-In order to use this driver, you must compile it with your kernel,
-with the following config options::
-
- ./scripts/config -e USB
- ./scripts/config -m MEDIA_SUPPORT
- ./scripts/config -e MEDIA_USB_SUPPORT
- ./scripts/config -e MEDIA_CAMERA_SUPPORT
- ./scripts/config -m USB_ZR364XX
-
-Usage
------
-
-modprobe zr364xx debug=X mode=Y
-
-- debug : set to 1 to enable verbose debug messages
-- mode : 0 = 320x240, 1 = 160x120, 2 = 640x480
-
-You can then use the camera with V4L2 compatible applications, for
-example Ekiga.
-
-To capture a single image, try this: dd if=/dev/video0 of=test.jpg bs=1M
-count=1
-
-links
------
-
-http://mxhaard.free.fr/ (support for many others cams including some Aiptek PocketDV)
-http://www.harmwal.nl/pccam880/ (this project also supports cameras based on this chipset)
-
-Supported devices
------------------
-
-====== ======= ============== ====================
-Vendor Product Distributor Model
-====== ======= ============== ====================
-0x08ca 0x0109 Aiptek PocketDV 3300
-0x08ca 0x0109 Maxell Maxcam PRO DV3
-0x041e 0x4024 Creative PC-CAM 880
-0x0d64 0x0108 Aiptek Fidelity 3200
-0x0d64 0x0108 Praktica DCZ 1.3 S
-0x0d64 0x0108 Genius Digital Camera (?)
-0x0d64 0x0108 DXG Technology Fashion Cam
-0x0546 0x3187 Polaroid iON 230
-0x0d64 0x3108 Praktica Exakta DC 2200
-0x0d64 0x3108 Genius G-Shot D211
-0x0595 0x4343 Concord Eye-Q Duo 1300
-0x0595 0x4343 Concord Eye-Q Duo 2000
-0x0595 0x4343 Fujifilm EX-10
-0x0595 0x4343 Ricoh RDC-6000
-0x0595 0x4343 Digitrex DSC 1300
-0x0595 0x4343 Firstline FDC 2000
-0x0bb0 0x500d Concord EyeQ Go Wireless
-0x0feb 0x2004 CRS Electronic 3.3 Digital Camera
-0x0feb 0x2004 Packard Bell DSC-300
-0x055f 0xb500 Mustek MDC 3000
-0x08ca 0x2062 Aiptek PocketDV 5700
-0x052b 0x1a18 Chiphead Megapix V12
-0x04c8 0x0729 Konica Revio 2
-0x04f2 0xa208 Creative PC-CAM 850
-0x0784 0x0040 Traveler Slimline X5
-0x06d6 0x0034 Trust Powerc@m 750
-0x0a17 0x0062 Pentax Optio 50L
-0x06d6 0x003b Trust Powerc@m 970Z
-0x0a17 0x004e Pentax Optio 50
-0x041e 0x405d Creative DiVi CAM 516
-0x08ca 0x2102 Aiptek DV T300
-0x06d6 0x003d Trust Powerc@m 910Z
-====== ======= ============== ====================
diff --git a/Documentation/admin-guide/mm/concepts.rst b/Documentation/admin-guide/mm/concepts.rst
index c79f1e3..e796b0a 100644
--- a/Documentation/admin-guide/mm/concepts.rst
+++ b/Documentation/admin-guide/mm/concepts.rst
@@ -1,5 +1,3 @@
-.. _mm_concepts:
-
=================
Concepts overview
=================
@@ -86,16 +84,15 @@
hugetlbfs. It is a pseudo filesystem that uses RAM as its backing
store. For the files created in this filesystem the data resides in
the memory and mapped using huge pages. The hugetlbfs is described at
-:ref:`Documentation/admin-guide/mm/hugetlbpage.rst <hugetlbpage>`.
+Documentation/admin-guide/mm/hugetlbpage.rst.
Another, more recent, mechanism that enables use of the huge pages is
called `Transparent HugePages`, or THP. Unlike the hugetlbfs that
requires users and/or system administrators to configure what parts of
the system memory should and can be mapped by the huge pages, THP
manages such mappings transparently to the user and hence the
-name. See
-:ref:`Documentation/admin-guide/mm/transhuge.rst <admin_guide_transhuge>`
-for more details about THP.
+name. See Documentation/admin-guide/mm/transhuge.rst for more details
+about THP.
Zones
=====
@@ -125,8 +122,8 @@
constructs an independent memory management subsystem. A node has its
own set of zones, lists of free and used pages and various statistics
counters. You can find more details about NUMA in
-:ref:`Documentation/mm/numa.rst <numa>` and in
-:ref:`Documentation/admin-guide/mm/numa_memory_policy.rst <numa_memory_policy>`.
+Documentation/mm/numa.rst` and in
+Documentation/admin-guide/mm/numa_memory_policy.rst.
Page cache
==========
diff --git a/Documentation/admin-guide/mm/damon/lru_sort.rst b/Documentation/admin-guide/mm/damon/lru_sort.rst
index c09cace..7b0775d 100644
--- a/Documentation/admin-guide/mm/damon/lru_sort.rst
+++ b/Documentation/admin-guide/mm/damon/lru_sort.rst
@@ -54,7 +54,7 @@
To let sysadmins enable or disable it and tune for the given system,
DAMON_LRU_SORT utilizes module parameters. That is, you can put
``damon_lru_sort.<parameter>=<value>`` on the kernel boot command line or write
-proper values to ``/sys/modules/damon_lru_sort/parameters/<parameter>`` files.
+proper values to ``/sys/module/damon_lru_sort/parameters/<parameter>`` files.
Below are the description of each parameter.
@@ -283,7 +283,7 @@
20%, it asks DAMON_LRU_SORT to do nothing again, so that we can fall back to
the LRU-list based page granularity reclamation. ::
- # cd /sys/modules/damon_lru_sort/parameters
+ # cd /sys/module/damon_lru_sort/parameters
# echo 500 > hot_thres_access_freq
# echo 120000000 > cold_min_age
# echo 10 > quota_ms
diff --git a/Documentation/admin-guide/mm/damon/reclaim.rst b/Documentation/admin-guide/mm/damon/reclaim.rst
index 4f1479a..343e25b 100644
--- a/Documentation/admin-guide/mm/damon/reclaim.rst
+++ b/Documentation/admin-guide/mm/damon/reclaim.rst
@@ -46,7 +46,7 @@
To let sysadmins enable or disable it and tune for the given system,
DAMON_RECLAIM utilizes module parameters. That is, you can put
``damon_reclaim.<parameter>=<value>`` on the kernel boot command line or write
-proper values to ``/sys/modules/damon_reclaim/parameters/<parameter>`` files.
+proper values to ``/sys/module/damon_reclaim/parameters/<parameter>`` files.
Below are the description of each parameter.
@@ -205,6 +205,15 @@
against. That is, DAMON_RECLAIM will find cold memory regions in this region
and reclaims. By default, biggest System RAM is used as the region.
+skip_anon
+---------
+
+Skip anonymous pages reclamation.
+
+If this parameter is set as ``Y``, DAMON_RECLAIM does not reclaim anonymous
+pages. By default, ``N``.
+
+
kdamond_pid
-----------
@@ -251,7 +260,7 @@
do nothing again, so that we can fall back to the LRU-list based page
granularity reclamation. ::
- # cd /sys/modules/damon_reclaim/parameters
+ # cd /sys/module/damon_reclaim/parameters
# echo 30000000 > min_age
# echo $((1 * 1024 * 1024 * 1024)) > quota_sz
# echo 1000 > quota_reset_interval_ms
diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst
index 1a5b6b7..9b823fe 100644
--- a/Documentation/admin-guide/mm/damon/usage.rst
+++ b/Documentation/admin-guide/mm/damon/usage.rst
@@ -25,10 +25,12 @@
interface provides only simple :ref:`statistics <damos_stats>` for the
monitoring results. For detailed monitoring results, DAMON provides a
:ref:`tracepoint <tracepoint>`.
-- *debugfs interface.*
+- *debugfs interface. (DEPRECATED!)*
:ref:`This <debugfs_interface>` is almost identical to :ref:`sysfs interface
- <sysfs_interface>`. This will be removed after next LTS kernel is released,
- so users should move to the :ref:`sysfs interface <sysfs_interface>`.
+ <sysfs_interface>`. This is deprecated, so users should move to the
+ :ref:`sysfs interface <sysfs_interface>`. If you depend on this and cannot
+ move, please report your usecase to damon@lists.linux.dev and
+ linux-mm@kvack.org.
- *Kernel Space Programming Interface.*
:doc:`This </mm/damon/api>` is for kernel space programmers. Using this,
users can utilize every feature of DAMON most flexibly and efficiently by
@@ -87,6 +89,8 @@
│ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms
│ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
│ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low
+ │ │ │ │ │ │ │ filters/nr_filters
+ │ │ │ │ │ │ │ │ 0/type,matching,memcg_id
│ │ │ │ │ │ │ stats/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds
│ │ │ │ │ │ │ tried_regions/
│ │ │ │ │ │ │ │ 0/start,end,nr_accesses,age
@@ -151,6 +155,8 @@
moment, only one context per kdamond is supported, so only ``0`` or ``1`` can
be written to the file.
+.. _sysfs_contexts:
+
contexts/<N>/
-------------
@@ -268,21 +274,32 @@
------------
In each scheme directory, five directories (``access_pattern``, ``quotas``,
-``watermarks``, ``stats``, and ``tried_regions``) and one file (``action``)
-exist.
+``watermarks``, ``filters``, ``stats``, and ``tried_regions``) and one file
+(``action``) exist.
The ``action`` file is for setting and getting what action you want to apply to
memory regions having specific access pattern of the interest. The keywords
that can be written to and read from the file and their meaning are as below.
- - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``
- - ``cold``: Call ``madvise()`` for the region with ``MADV_COLD``
- - ``pageout``: Call ``madvise()`` for the region with ``MADV_PAGEOUT``
- - ``hugepage``: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``
- - ``nohugepage``: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``
+Note that support of each action depends on the running DAMON operations set
+`implementation <sysfs_contexts>`.
+
+ - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``.
+ Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``cold``: Call ``madvise()`` for the region with ``MADV_COLD``.
+ Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``pageout``: Call ``madvise()`` for the region with ``MADV_PAGEOUT``.
+ Supported by ``vaddr``, ``fvaddr`` and ``paddr`` operations set.
+ - ``hugepage``: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``.
+ Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``nohugepage``: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``.
+ Supported by ``vaddr`` and ``fvaddr`` operations set.
- ``lru_prio``: Prioritize the region on its LRU lists.
+ Supported by ``paddr`` operations set.
- ``lru_deprio``: Deprioritize the region on its LRU lists.
- - ``stat``: Do nothing but count the statistics
+ Supported by ``paddr`` operations set.
+ - ``stat``: Do nothing but count the statistics.
+ Supported by all operations sets.
schemes/<N>/access_pattern/
---------------------------
@@ -347,6 +364,46 @@
The ``interval`` should written in microseconds unit.
+schemes/<N>/filters/
+--------------------
+
+Users could know something more than the kernel for specific types of memory.
+In the case, users could do their own management for the memory and hence
+doesn't want DAMOS bothers that. Users could limit DAMOS by setting the access
+pattern of the scheme and/or the monitoring regions for the purpose, but that
+can be inefficient in some cases. In such cases, users could set non-access
+pattern driven filters using files in this directory.
+
+In the beginning, this directory has only one file, ``nr_filters``. Writing a
+number (``N``) to the file creates the number of child directories named ``0``
+to ``N-1``. Each directory represents each filter. The filters are evaluated
+in the numeric order.
+
+Each filter directory contains three files, namely ``type``, ``matcing``, and
+``memcg_path``. You can write one of two special keywords, ``anon`` for
+anonymous pages, or ``memcg`` for specific memory cgroup filtering. In case of
+the memory cgroup filtering, you can specify the memory cgroup of the interest
+by writing the path of the memory cgroup from the cgroups mount point to
+``memcg_path`` file. You can write ``Y`` or ``N`` to ``matching`` file to
+filter out pages that does or does not match to the type, respectively. Then,
+the scheme's action will not be applied to the pages that specified to be
+filtered out.
+
+For example, below restricts a DAMOS action to be applied to only non-anonymous
+pages of all memory cgroups except ``/having_care_already``.::
+
+ # echo 2 > nr_filters
+ # # filter out anonymous pages
+ echo anon > 0/type
+ echo Y > 0/matching
+ # # further filter out all cgroups except one at '/having_care_already'
+ echo memcg > 1/type
+ echo /having_care_already > 1/memcg_path
+ echo N > 1/matching
+
+Note that filters are currently supported only when ``paddr``
+`implementation <sysfs_contexts>` is being used.
+
.. _sysfs_schemes_stats:
schemes/<N>/stats/
@@ -432,13 +489,17 @@
.. _debugfs_interface:
-debugfs Interface
-=================
+debugfs Interface (DEPRECATED!)
+===============================
.. note::
- DAMON debugfs interface will be removed after next LTS kernel is released, so
- users should move to the :ref:`sysfs interface <sysfs_interface>`.
+ THIS IS DEPRECATED!
+
+ DAMON debugfs interface is deprecated, so users should move to the
+ :ref:`sysfs interface <sysfs_interface>`. If you depend on this and cannot
+ move, please report your usecase to damon@lists.linux.dev and
+ linux-mm@kvack.org.
DAMON exports eight files, ``attrs``, ``target_ids``, ``init_regions``,
``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` and
@@ -574,11 +635,15 @@
DAMON will apply to the regions having the target access pattern. The
supported numbers and their meanings are as below.
- - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``
- - 1: Call ``madvise()`` for the region with ``MADV_COLD``
- - 2: Call ``madvise()`` for the region with ``MADV_PAGEOUT``
- - 3: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``
- - 4: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``
+ - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``. Ignored if
+ ``target`` is ``paddr``.
+ - 1: Call ``madvise()`` for the region with ``MADV_COLD``. Ignored if
+ ``target`` is ``paddr``.
+ - 2: Call ``madvise()`` for the region with ``MADV_PAGEOUT``.
+ - 3: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``. Ignored if
+ ``target`` is ``paddr``.
+ - 4: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``. Ignored if
+ ``target`` is ``paddr``.
- 5: Do nothing but count the statistics
Quota
diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst
index 19f27c0..e4d4b4a 100644
--- a/Documentation/admin-guide/mm/hugetlbpage.rst
+++ b/Documentation/admin-guide/mm/hugetlbpage.rst
@@ -1,5 +1,3 @@
-.. _hugetlbpage:
-
=============
HugeTLB Pages
=============
@@ -86,7 +84,7 @@
Note: When the feature of freeing unused vmemmap pages associated with each
hugetlb page is enabled, we can fail to free the huge pages triggered by
-the user when ths system is under memory pressure. Please try again later.
+the user when the system is under memory pressure. Please try again later.
Pages that are used as huge pages are reserved inside the kernel and cannot
be used for other purposes. Huge pages cannot be swapped out under
@@ -313,7 +311,7 @@
resulting effect on persistent huge page allocation is as follows:
#. Regardless of mempolicy mode [see
- :ref:`Documentation/admin-guide/mm/numa_memory_policy.rst <numa_memory_policy>`],
+ Documentation/admin-guide/mm/numa_memory_policy.rst],
persistent huge pages will be distributed across the node or nodes
specified in the mempolicy as if "interleave" had been specified.
However, if a node in the policy does not contain sufficient contiguous
@@ -461,13 +459,13 @@
.. _map_hugetlb:
``map_hugetlb``
- see tools/testing/selftests/vm/map_hugetlb.c
+ see tools/testing/selftests/mm/map_hugetlb.c
``hugepage-shm``
- see tools/testing/selftests/vm/hugepage-shm.c
+ see tools/testing/selftests/mm/hugepage-shm.c
``hugepage-mmap``
- see tools/testing/selftests/vm/hugepage-mmap.c
+ see tools/testing/selftests/mm/hugepage-mmap.c
The `libhugetlbfs`_ library provides a wide range of userspace tools
to help with huge page usability, environment setup, and control.
diff --git a/Documentation/admin-guide/mm/idle_page_tracking.rst b/Documentation/admin-guide/mm/idle_page_tracking.rst
index df9394f..16fcf38 100644
--- a/Documentation/admin-guide/mm/idle_page_tracking.rst
+++ b/Documentation/admin-guide/mm/idle_page_tracking.rst
@@ -1,5 +1,3 @@
-.. _idle_page_tracking:
-
==================
Idle Page Tracking
==================
@@ -65,14 +63,13 @@
are not reclaimable, he or she can filter them out using
``/proc/kpageflags``.
-The page-types tool in the tools/vm directory can be used to assist in this.
+The page-types tool in the tools/mm directory can be used to assist in this.
If the tool is run initially with the appropriate option, it will mark all the
queried pages as idle. Subsequent runs of the tool can then show which pages have
their idle flag cleared in the interim.
-See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more
-information about ``/proc/pid/pagemap``, ``/proc/kpageflags``, and
-``/proc/kpagecgroup``.
+See Documentation/admin-guide/mm/pagemap.rst for more information about
+``/proc/pid/pagemap``, ``/proc/kpageflags``, and ``/proc/kpagecgroup``.
.. _impl_details:
diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst
index d1064e0..1f883ab 100644
--- a/Documentation/admin-guide/mm/index.rst
+++ b/Documentation/admin-guide/mm/index.rst
@@ -16,8 +16,7 @@
.. _man 5 proc: http://man7.org/linux/man-pages/man5/proc.5.html
Linux memory management has its own jargon and if you are not yet
-familiar with it, consider reading
-:ref:`Documentation/admin-guide/mm/concepts.rst <mm_concepts>`.
+familiar with it, consider reading Documentation/admin-guide/mm/concepts.rst.
Here we document in detail how to interact with various mechanisms in
the Linux memory management.
diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst
index fb6ba20..eed51a91 100644
--- a/Documentation/admin-guide/mm/ksm.rst
+++ b/Documentation/admin-guide/mm/ksm.rst
@@ -1,5 +1,3 @@
-.. _admin_guide_ksm:
-
=======================
Kernel Samepage Merging
=======================
diff --git a/Documentation/admin-guide/mm/memory-hotplug.rst b/Documentation/admin-guide/mm/memory-hotplug.rst
index a3c9e8a..1b02fe5 100644
--- a/Documentation/admin-guide/mm/memory-hotplug.rst
+++ b/Documentation/admin-guide/mm/memory-hotplug.rst
@@ -1,5 +1,3 @@
-.. _admin_guide_memory_hotplug:
-
==================
Memory Hot(Un)Plug
==================
diff --git a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst
index 5a6afec..46515ad 100644
--- a/Documentation/admin-guide/mm/numa_memory_policy.rst
+++ b/Documentation/admin-guide/mm/numa_memory_policy.rst
@@ -1,5 +1,3 @@
-.. _numa_memory_policy:
-
==================
NUMA Memory Policy
==================
@@ -246,7 +244,7 @@
interleaved system default policy works in this mode.
MPOL_PREFERRED_MANY
- This mode specifices that the allocation should be preferrably
+ This mode specifies that the allocation should be preferably
satisfied from the nodemask specified in the policy. If there is
a memory pressure on all nodes in the nodemask, the allocation
can fall back to all existing numa nodes. This is effectively
@@ -360,7 +358,7 @@
2) examination of the policy to determine the policy mode and associated node
or node lists, if any, for page allocation. This is considered a "hot
path". Note that for MPOL_BIND, the "usage" extends across the entire
- allocation process, which may sleep during page reclaimation, because the
+ allocation process, which may sleep during page reclamation, because the
BIND policy nodemask is used, by reference, to filter ineligible nodes.
We can avoid taking an extra reference during the usages listed above as
diff --git a/Documentation/admin-guide/mm/numaperf.rst b/Documentation/admin-guide/mm/numaperf.rst
index 1666973..90a12b6 100644
--- a/Documentation/admin-guide/mm/numaperf.rst
+++ b/Documentation/admin-guide/mm/numaperf.rst
@@ -1,6 +1,7 @@
-.. _numaperf:
+=======================
+NUMA Memory Performance
+=======================
-=============
NUMA Locality
=============
@@ -61,7 +62,6 @@
IO initiators such as GPUs and NICs. Unlike access class 0, only
nodes containing CPUs are considered.
-================
NUMA Performance
================
@@ -96,7 +96,6 @@
Access class 1 takes the same form but only includes values for CPU to
memory activity.
-==========
NUMA Cache
==========
@@ -170,7 +169,6 @@
The "write_policy" will be 0 for write-back, and non-zero for
write-through caching.
-========
See Also
========
diff --git a/Documentation/admin-guide/mm/pagemap.rst b/Documentation/admin-guide/mm/pagemap.rst
index 6e2e416..b5f970d 100644
--- a/Documentation/admin-guide/mm/pagemap.rst
+++ b/Documentation/admin-guide/mm/pagemap.rst
@@ -1,5 +1,3 @@
-.. _pagemap:
-
=============================
Examining Process Page Tables
=============================
@@ -19,10 +17,10 @@
* Bits 0-4 swap type if swapped
* Bits 5-54 swap offset if swapped
* Bit 55 pte is soft-dirty (see
- :ref:`Documentation/admin-guide/mm/soft-dirty.rst <soft_dirty>`)
+ Documentation/admin-guide/mm/soft-dirty.rst)
* Bit 56 page exclusively mapped (since 4.2)
* Bit 57 pte is uffd-wp write-protected (since 5.13) (see
- :ref:`Documentation/admin-guide/mm/userfaultfd.rst <userfaultfd>`)
+ Documentation/admin-guide/mm/userfaultfd.rst)
* Bits 58-60 zero
* Bit 61 page is file-page or shared-anon (since 3.5)
* Bit 62 page swapped
@@ -46,7 +44,7 @@
* ``/proc/kpagecount``. This file contains a 64-bit count of the number of
times each page is mapped, indexed by PFN.
-The page-types tool in the tools/vm directory can be used to query the
+The page-types tool in the tools/mm directory can be used to query the
number of times a page is mapped.
* ``/proc/kpageflags``. This file contains a 64-bit set of flags for each
@@ -105,8 +103,7 @@
A compound page with order N consists of 2^N physically contiguous pages.
A compound page with order 2 takes the form of "HTTT", where H donates its
head page and T donates its tail page(s). The major consumers of compound
- pages are hugeTLB pages
- (:ref:`Documentation/admin-guide/mm/hugetlbpage.rst <hugetlbpage>`),
+ pages are hugeTLB pages (Documentation/admin-guide/mm/hugetlbpage.rst),
the SLUB etc. memory allocators and various device drivers.
However in this interface, only huge/giga pages are made visible
to end users.
@@ -128,7 +125,7 @@
Zero page for pfn_zero or huge_zero page.
25 - IDLE
The page has not been accessed since it was marked idle (see
- :ref:`Documentation/admin-guide/mm/idle_page_tracking.rst <idle_page_tracking>`).
+ Documentation/admin-guide/mm/idle_page_tracking.rst).
Note that this flag may be stale in case the page was accessed via
a PTE. To make sure the flag is up-to-date one has to read
``/sys/kernel/mm/page_idle/bitmap`` first.
@@ -173,7 +170,7 @@
14 - SWAPBACKED
The page is backed by swap/RAM.
-The page-types tool in the tools/vm directory can be used to query the
+The page-types tool in the tools/mm directory can be used to query the
above flags.
Using pagemap to do something useful
diff --git a/Documentation/admin-guide/mm/shrinker_debugfs.rst b/Documentation/admin-guide/mm/shrinker_debugfs.rst
index 3887f0b..c582033 100644
--- a/Documentation/admin-guide/mm/shrinker_debugfs.rst
+++ b/Documentation/admin-guide/mm/shrinker_debugfs.rst
@@ -1,5 +1,3 @@
-.. _shrinker_debugfs:
-
==========================
Shrinker Debugfs Interface
==========================
diff --git a/Documentation/admin-guide/mm/soft-dirty.rst b/Documentation/admin-guide/mm/soft-dirty.rst
index cb0cfd6..aeea936 100644
--- a/Documentation/admin-guide/mm/soft-dirty.rst
+++ b/Documentation/admin-guide/mm/soft-dirty.rst
@@ -1,5 +1,3 @@
-.. _soft_dirty:
-
===============
Soft-Dirty PTEs
===============
diff --git a/Documentation/admin-guide/mm/swap_numa.rst b/Documentation/admin-guide/mm/swap_numa.rst
index e0466f2..2e63062 100644
--- a/Documentation/admin-guide/mm/swap_numa.rst
+++ b/Documentation/admin-guide/mm/swap_numa.rst
@@ -1,5 +1,3 @@
-.. _swap_numa:
-
===========================================
Automatically bind swap device to numa node
===========================================
diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index 8ee78ec..b0cc824 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -1,5 +1,3 @@
-.. _admin_guide_transhuge:
-
============================
Transparent Hugepage Support
============================
diff --git a/Documentation/admin-guide/mm/userfaultfd.rst b/Documentation/admin-guide/mm/userfaultfd.rst
index 83f3191..7dc823b 100644
--- a/Documentation/admin-guide/mm/userfaultfd.rst
+++ b/Documentation/admin-guide/mm/userfaultfd.rst
@@ -1,5 +1,3 @@
-.. _userfaultfd:
-
===========
Userfaultfd
===========
diff --git a/Documentation/admin-guide/mm/zswap.rst b/Documentation/admin-guide/mm/zswap.rst
index 6dd74a1..c5c2c7d 100644
--- a/Documentation/admin-guide/mm/zswap.rst
+++ b/Documentation/admin-guide/mm/zswap.rst
@@ -1,5 +1,3 @@
-.. _zswap:
-
=====
zswap
=====
diff --git a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst
index 578407e..75a4084 100644
--- a/Documentation/admin-guide/perf/hns3-pmu.rst
+++ b/Documentation/admin-guide/perf/hns3-pmu.rst
@@ -53,7 +53,7 @@
event pair. And the bit 16 of config indicates getting counter 0 or
counter 1 of hardware event.
-After getting two values of event pair in usersapce, the formula of
+After getting two values of event pair in userspace, the formula of
computation to calculate real performance data is:::
counter 0 / counter 1
diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
index d143e72..6e5298b 100644
--- a/Documentation/admin-guide/pm/amd-pstate.rst
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -473,7 +473,7 @@
* We can introduce more functional or performance tests to align the result together, it will benefit power and performance scale optimization.
-1. Test case decriptions
+1. Test case descriptions
1). Basic tests
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
index d5043cd..bf13ad2 100644
--- a/Documentation/admin-guide/pm/intel_pstate.rst
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -712,7 +712,7 @@
The following sequence of shell commands can be used to enable them and see
their output (if the kernel is generally configured to support event tracing)::
- # cd /sys/kernel/debug/tracing/
+ # cd /sys/kernel/tracing/
# echo 1 > events/power/pstate_sample/enable
# echo 1 > events/power/cpu_frequency/enable
# cat trace
@@ -732,7 +732,7 @@
P-state is called, the ``ftrace`` filter can be set to
:c:func:`intel_pstate_set_pstate`::
- # cd /sys/kernel/debug/tracing/
+ # cd /sys/kernel/tracing/
# cat available_filter_functions | grep -i pstate
intel_pstate_set_pstate
intel_pstate_cpu_init
diff --git a/Documentation/admin-guide/spkguide.txt b/Documentation/admin-guide/spkguide.txt
index 1265c1e..74ea7f3 100644
--- a/Documentation/admin-guide/spkguide.txt
+++ b/Documentation/admin-guide/spkguide.txt
@@ -1105,8 +1105,8 @@
Alternatively, you can add the above line to your file
~/.bashrc or ~/.bash_profile.
-If your system administrator ran himself the script, all the users will be able
-to change from English to the language choosed by root and do directly
+If your system administrator himself ran the script, all the users will be able
+to change from English to the language chosen by root and do directly
speakupconf load (or add this to the ~/.bashrc or
~/.bash_profile file). If there are several languages to handle, the
administrator (or every user) will have to run the first steps until speakupconf
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index 46e3d62..4b7bfea 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -453,9 +453,10 @@
kexec_load_disabled
===================
-A toggle indicating if the ``kexec_load`` syscall has been disabled.
-This value defaults to 0 (false: ``kexec_load`` enabled), but can be
-set to 1 (true: ``kexec_load`` disabled).
+A toggle indicating if the syscalls ``kexec_load`` and
+``kexec_file_load`` have been disabled.
+This value defaults to 0 (false: ``kexec_*load`` enabled), but can be
+set to 1 (true: ``kexec_*load`` disabled).
Once true, kexec can no longer be used, and the toggle cannot be set
back to false.
This allows a kexec image to be loaded before disabling the syscall,
@@ -463,6 +464,24 @@
altered.
Generally used together with the `modules_disabled`_ sysctl.
+kexec_load_limit_panic
+======================
+
+This parameter specifies a limit to the number of times the syscalls
+``kexec_load`` and ``kexec_file_load`` can be called with a crash
+image. It can only be set with a more restrictive value than the
+current one.
+
+== ======================================================
+-1 Unlimited calls to kexec. This is the default setting.
+N Number of calls left.
+== ======================================================
+
+kexec_load_limit_reboot
+=======================
+
+Similar functionality as ``kexec_load_limit_panic``, but for a normal
+image.
kptr_restrict
=============
diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
index 6394f5d..466c560 100644
--- a/Documentation/admin-guide/sysctl/net.rst
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -215,6 +215,12 @@
The maximum receive socket buffer size in bytes.
+rps_default_mask
+----------------
+
+The default RPS CPU mask used on newly created network devices. An empty
+mask means RPS disabled by default.
+
tstamp_allow_data
-----------------
Allow processes to receive tx timestamps looped together with the original
diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
index 988f6a4..45ba1f4 100644
--- a/Documentation/admin-guide/sysctl/vm.rst
+++ b/Documentation/admin-guide/sysctl/vm.rst
@@ -356,7 +356,7 @@
But, these values are not used directly. The kernel calculates # of protection
pages for each zones from them. These are shown as array of protection pages
-in /proc/zoneinfo like followings. (This is an example of x86-64 box).
+in /proc/zoneinfo like the following. (This is an example of x86-64 box).
Each zone has an array of protection pages like this::
Node 0, zone DMA
@@ -433,7 +433,7 @@
that cannot be handled by the kernel. In some cases (like the page
still having a valid copy on disk) the kernel will handle the failure
transparently without affecting any applications. But if there is
-no other uptodate copy of the data it will kill to prevent any data
+no other up-to-date copy of the data it will kill to prevent any data
corruptions from propagating.
1: Kill all processes that have the corrupted and not reloadable page mapped
diff --git a/Documentation/admin-guide/sysrq.rst b/Documentation/admin-guide/sysrq.rst
index 0a178ef..51906e47 100644
--- a/Documentation/admin-guide/sysrq.rst
+++ b/Documentation/admin-guide/sysrq.rst
@@ -138,7 +138,7 @@
``v`` Forcefully restores framebuffer console
``v`` Causes ETM buffer dump [ARM-specific]
-``w`` Dumps tasks that are in uninterruptable (blocked) state.
+``w`` Dumps tasks that are in uninterruptible (blocked) state.
``x`` Used by xmon interface on ppc/powerpc platforms.
Show global PMU Registers on sparc64.
diff --git a/Documentation/admin-guide/thermal/intel_powerclamp.rst b/Documentation/admin-guide/thermal/intel_powerclamp.rst
index 3ce9604..08509b9 100644
--- a/Documentation/admin-guide/thermal/intel_powerclamp.rst
+++ b/Documentation/admin-guide/thermal/intel_powerclamp.rst
@@ -87,7 +87,7 @@
belong to the offlined CPUs will be terminated immediately.
Running as SCHED_FIFO and relatively high priority, also allows such
-scheme to work for both preemptable and non-preemptable kernels.
+scheme to work for both preemptible and non-preemptible kernels.
Alignment of idle time around jiffies ensures scalability for HZ
values. This effect can be better visualized using a Perf timechart.
The following diagram shows the behavior of kernel thread
diff --git a/Documentation/admin-guide/workload-tracing.rst b/Documentation/admin-guide/workload-tracing.rst
new file mode 100644
index 0000000..b2e254e
--- /dev/null
+++ b/Documentation/admin-guide/workload-tracing.rst
@@ -0,0 +1,606 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR CC-BY-4.0)
+
+======================================================
+Discovering Linux kernel subsystems used by a workload
+======================================================
+
+:Authors: - Shuah Khan <skhan@linuxfoundation.org>
+ - Shefali Sharma <sshefali021@gmail.com>
+:maintained-by: Shuah Khan <skhan@linuxfoundation.org>
+
+Key Points
+==========
+
+ * Understanding system resources necessary to build and run a workload
+ is important.
+ * Linux tracing and strace can be used to discover the system resources
+ in use by a workload. The completeness of the system usage information
+ depends on the completeness of coverage of a workload.
+ * Performance and security of the operating system can be analyzed with
+ the help of tools such as:
+ `perf <https://man7.org/linux/man-pages/man1/perf.1.html>`_,
+ `stress-ng <https://www.mankier.com/1/stress-ng>`_,
+ `paxtest <https://github.com/opntr/paxtest-freebsd>`_.
+ * Once we discover and understand the workload needs, we can focus on them
+ to avoid regressions and use it to evaluate safety considerations.
+
+Methodology
+===========
+
+`strace <https://man7.org/linux/man-pages/man1/strace.1.html>`_ is a
+diagnostic, instructional, and debugging tool and can be used to discover
+the system resources in use by a workload. Once we discover and understand
+the workload needs, we can focus on them to avoid regressions and use it
+to evaluate safety considerations. We use strace tool to trace workloads.
+
+This method of tracing using strace tells us the system calls invoked by
+the workload and doesn't include all the system calls that can be invoked
+by it. In addition, this tracing method tells us just the code paths within
+these system calls that are invoked. As an example, if a workload opens a
+file and reads from it successfully, then the success path is the one that
+is traced. Any error paths in that system call will not be traced. If there
+is a workload that provides full coverage of a workload then the method
+outlined here will trace and find all possible code paths. The completeness
+of the system usage information depends on the completeness of coverage of a
+workload.
+
+The goal is tracing a workload on a system running a default kernel without
+requiring custom kernel installs.
+
+How do we gather fine-grained system information?
+=================================================
+
+strace tool can be used to trace system calls made by a process and signals
+it receives. System calls are the fundamental interface between an
+application and the operating system kernel. They enable a program to
+request services from the kernel. For instance, the open() system call in
+Linux is used to provide access to a file in the file system. strace enables
+us to track all the system calls made by an application. It lists all the
+system calls made by a process and their resulting output.
+
+You can generate profiling data combining strace and perf record tools to
+record the events and information associated with a process. This provides
+insight into the process. "perf annotate" tool generates the statistics of
+each instruction of the program. This document goes over the details of how
+to gather fine-grained information on a workload's usage of system resources.
+
+We used strace to trace the perf, stress-ng, paxtest workloads to illustrate
+our methodology to discover resources used by a workload. This process can
+be applied to trace other workloads.
+
+Getting the system ready for tracing
+====================================
+
+Before we can get started we will show you how to get your system ready.
+We assume that you have a Linux distribution running on a physical system
+or a virtual machine. Most distributions will include strace command. Let’s
+install other tools that aren’t usually included to build Linux kernel.
+Please note that the following works on Debian based distributions. You
+might have to find equivalent packages on other Linux distributions.
+
+Install tools to build Linux kernel and tools in kernel repository.
+scripts/ver_linux is a good way to check if your system already has
+the necessary tools::
+
+ sudo apt-get build-essentials flex bison yacc
+ sudo apt install libelf-dev systemtap-sdt-dev libaudit-dev libslang2-dev libperl-dev libdw-dev
+
+cscope is a good tool to browse kernel sources. Let's install it now::
+
+ sudo apt-get install cscope
+
+Install stress-ng and paxtest::
+
+ apt-get install stress-ng
+ apt-get install paxtest
+
+Workload overview
+=================
+
+As mentioned earlier, we used strace to trace perf bench, stress-ng and
+paxtest workloads to show how to analyze a workload and identify Linux
+subsystems used by these workloads. Let's start with an overview of these
+three workloads to get a better understanding of what they do and how to
+use them.
+
+perf bench (all) workload
+-------------------------
+
+The perf bench command contains multiple multi-threaded microkernel
+benchmarks for executing different subsystems in the Linux kernel and
+system calls. This allows us to easily measure the impact of changes,
+which can help mitigate performance regressions. It also acts as a common
+benchmarking framework, enabling developers to easily create test cases,
+integrate transparently, and use performance-rich tooling subsystems.
+
+Stress-ng netdev stressor workload
+----------------------------------
+
+stress-ng is used for performing stress testing on the kernel. It allows
+you to exercise various physical subsystems of the computer, as well as
+interfaces of the OS kernel, using "stressor-s". They are available for
+CPU, CPU cache, devices, I/O, interrupts, file system, memory, network,
+operating system, pipelines, schedulers, and virtual machines. Please refer
+to the `stress-ng man-page <https://www.mankier.com/1/stress-ng>`_ to
+find the description of all the available stressor-s. The netdev stressor
+starts specified number (N) of workers that exercise various netdevice
+ioctl commands across all the available network devices.
+
+paxtest kiddie workload
+-----------------------
+
+paxtest is a program that tests buffer overflows in the kernel. It tests
+kernel enforcements over memory usage. Generally, execution in some memory
+segments makes buffer overflows possible. It runs a set of programs that
+attempt to subvert memory usage. It is used as a regression test suite for
+PaX, but might be useful to test other memory protection patches for the
+kernel. We used paxtest kiddie mode which looks for simple vulnerabilities.
+
+What is strace and how do we use it?
+====================================
+
+As mentioned earlier, strace which is a useful diagnostic, instructional,
+and debugging tool and can be used to discover the system resources in use
+by a workload. It can be used:
+
+ * To see how a process interacts with the kernel.
+ * To see why a process is failing or hanging.
+ * For reverse engineering a process.
+ * To find the files on which a program depends.
+ * For analyzing the performance of an application.
+ * For troubleshooting various problems related to the operating system.
+
+In addition, strace can generate run-time statistics on times, calls, and
+errors for each system call and report a summary when program exits,
+suppressing the regular output. This attempts to show system time (CPU time
+spent running in the kernel) independent of wall clock time. We plan to use
+these features to get information on workload system usage.
+
+strace command supports basic, verbose, and stats modes. strace command when
+run in verbose mode gives more detailed information about the system calls
+invoked by a process.
+
+Running strace -c generates a report of the percentage of time spent in each
+system call, the total time in seconds, the microseconds per call, the total
+number of calls, the count of each system call that has failed with an error
+and the type of system call made.
+
+ * Usage: strace <command we want to trace>
+ * Verbose mode usage: strace -v <command>
+ * Gather statistics: strace -c <command>
+
+We used the “-c” option to gather fine-grained run-time statistics in use
+by three workloads we have chose for this analysis.
+
+ * perf
+ * stress-ng
+ * paxtest
+
+What is cscope and how do we use it?
+====================================
+
+Now let’s look at `cscope <https://cscope.sourceforge.net/>`_, a command
+line tool for browsing C, C++ or Java code-bases. We can use it to find
+all the references to a symbol, global definitions, functions called by a
+function, functions calling a function, text strings, regular expression
+patterns, files including a file.
+
+We can use cscope to find which system call belongs to which subsystem.
+This way we can find the kernel subsystems used by a process when it is
+executed.
+
+Let’s checkout the latest Linux repository and build cscope database::
+
+ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git linux
+ cd linux
+ cscope -R -p10 # builds cscope.out database before starting browse session
+ cscope -d -p10 # starts browse session on cscope.out database
+
+Note: Run "cscope -R -p10" to build the database and c"scope -d -p10" to
+enter into the browsing session. cscope by default cscope.out database.
+To get out of this mode press ctrl+d. -p option is used to specify the
+number of file path components to display. -p10 is optimal for browsing
+kernel sources.
+
+What is perf and how do we use it?
+==================================
+
+Perf is an analysis tool based on Linux 2.6+ systems, which abstracts the
+CPU hardware difference in performance measurement in Linux, and provides
+a simple command line interface. Perf is based on the perf_events interface
+exported by the kernel. It is very useful for profiling the system and
+finding performance bottlenecks in an application.
+
+If you haven't already checked out the Linux mainline repository, you can do
+so and then build kernel and perf tool::
+
+ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git linux
+ cd linux
+ make -j3 all
+ cd tools/perf
+ make
+
+Note: The perf command can be built without building the kernel in the
+repository and can be run on older kernels. However matching the kernel
+and perf revisions gives more accurate information on the subsystem usage.
+
+We used "perf stat" and "perf bench" options. For a detailed information on
+the perf tool, run "perf -h".
+
+perf stat
+---------
+The perf stat command generates a report of various hardware and software
+events. It does so with the help of hardware counter registers found in
+modern CPUs that keep the count of these activities. "perf stat cal" shows
+stats for cal command.
+
+Perf bench
+----------
+The perf bench command contains multiple multi-threaded microkernel
+benchmarks for executing different subsystems in the Linux kernel and
+system calls. This allows us to easily measure the impact of changes,
+which can help mitigate performance regressions. It also acts as a common
+benchmarking framework, enabling developers to easily create test cases,
+integrate transparently, and use performance-rich tooling.
+
+"perf bench all" command runs the following benchmarks:
+
+ * sched/messaging
+ * sched/pipe
+ * syscall/basic
+ * mem/memcpy
+ * mem/memset
+
+What is stress-ng and how do we use it?
+=======================================
+
+As mentioned earlier, stress-ng is used for performing stress testing on
+the kernel. It allows you to exercise various physical subsystems of the
+computer, as well as interfaces of the OS kernel, using stressor-s. They
+are available for CPU, CPU cache, devices, I/O, interrupts, file system,
+memory, network, operating system, pipelines, schedulers, and virtual
+machines.
+
+The netdev stressor starts N workers that exercise various netdevice ioctl
+commands across all the available network devices. The following ioctls are
+exercised:
+
+ * SIOCGIFCONF, SIOCGIFINDEX, SIOCGIFNAME, SIOCGIFFLAGS
+ * SIOCGIFADDR, SIOCGIFNETMASK, SIOCGIFMETRIC, SIOCGIFMTU
+ * SIOCGIFHWADDR, SIOCGIFMAP, SIOCGIFTXQLEN
+
+The following command runs the stressor::
+
+ stress-ng --netdev 1 -t 60 --metrics command.
+
+We can use the perf record command to record the events and information
+associated with a process. This command records the profiling data in the
+perf.data file in the same directory.
+
+Using the following commands you can record the events associated with the
+netdev stressor, view the generated report perf.data and annotate the to
+view the statistics of each instruction of the program::
+
+ perf record stress-ng --netdev 1 -t 60 --metrics command.
+ perf report
+ perf annotate
+
+What is paxtest and how do we use it?
+=====================================
+
+paxtest is a program that tests buffer overflows in the kernel. It tests
+kernel enforcements over memory usage. Generally, execution in some memory
+segments makes buffer overflows possible. It runs a set of programs that
+attempt to subvert memory usage. It is used as a regression test suite for
+PaX, and will be useful to test other memory protection patches for the
+kernel.
+
+paxtest provides kiddie and blackhat modes. The paxtest kiddie mode runs
+in normal mode, whereas the blackhat mode tries to get around the protection
+of the kernel testing for vulnerabilities. We focus on the kiddie mode here
+and combine "paxtest kiddie" run with "perf record" to collect CPU stack
+traces for the paxtest kiddie run to see which function is calling other
+functions in the performance profile. Then the "dwarf" (DWARF's Call Frame
+Information) mode can be used to unwind the stack.
+
+The following command can be used to view resulting report in call-graph
+format::
+
+ perf record --call-graph dwarf paxtest kiddie
+ perf report --stdio
+
+Tracing workloads
+=================
+
+Now that we understand the workloads, let's start tracing them.
+
+Tracing perf bench all workload
+-------------------------------
+
+Run the following command to trace perf bench all workload::
+
+ strace -c perf bench all
+
+**System Calls made by the workload**
+
+The below table shows the system calls invoked by the workload, number of
+times each system call is invoked, and the corresponding Linux subsystem.
+
++-------------------+-----------+-----------------+-------------------------+
+| System Call | # calls | Linux Subsystem | System Call (API) |
++===================+===========+=================+=========================+
+| getppid | 10000001 | Process Mgmt | sys_getpid() |
++-------------------+-----------+-----------------+-------------------------+
+| clone | 1077 | Process Mgmt. | sys_clone() |
++-------------------+-----------+-----------------+-------------------------+
+| prctl | 23 | Process Mgmt. | sys_prctl() |
++-------------------+-----------+-----------------+-------------------------+
+| prlimit64 | 7 | Process Mgmt. | sys_prlimit64() |
++-------------------+-----------+-----------------+-------------------------+
+| getpid | 10 | Process Mgmt. | sys_getpid() |
++-------------------+-----------+-----------------+-------------------------+
+| uname | 3 | Process Mgmt. | sys_uname() |
++-------------------+-----------+-----------------+-------------------------+
+| sysinfo | 1 | Process Mgmt. | sys_sysinfo() |
++-------------------+-----------+-----------------+-------------------------+
+| getuid | 1 | Process Mgmt. | sys_getuid() |
++-------------------+-----------+-----------------+-------------------------+
+| getgid | 1 | Process Mgmt. | sys_getgid() |
++-------------------+-----------+-----------------+-------------------------+
+| geteuid | 1 | Process Mgmt. | sys_geteuid() |
++-------------------+-----------+-----------------+-------------------------+
+| getegid | 1 | Process Mgmt. | sys_getegid |
++-------------------+-----------+-----------------+-------------------------+
+| close | 49951 | Filesystem | sys_close() |
++-------------------+-----------+-----------------+-------------------------+
+| pipe | 604 | Filesystem | sys_pipe() |
++-------------------+-----------+-----------------+-------------------------+
+| openat | 48560 | Filesystem | sys_opennat() |
++-------------------+-----------+-----------------+-------------------------+
+| fstat | 8338 | Filesystem | sys_fstat() |
++-------------------+-----------+-----------------+-------------------------+
+| stat | 1573 | Filesystem | sys_stat() |
++-------------------+-----------+-----------------+-------------------------+
+| pread64 | 9646 | Filesystem | sys_pread64() |
++-------------------+-----------+-----------------+-------------------------+
+| getdents64 | 1873 | Filesystem | sys_getdents64() |
++-------------------+-----------+-----------------+-------------------------+
+| access | 3 | Filesystem | sys_access() |
++-------------------+-----------+-----------------+-------------------------+
+| lstat | 1880 | Filesystem | sys_lstat() |
++-------------------+-----------+-----------------+-------------------------+
+| lseek | 6 | Filesystem | sys_lseek() |
++-------------------+-----------+-----------------+-------------------------+
+| ioctl | 3 | Filesystem | sys_ioctl() |
++-------------------+-----------+-----------------+-------------------------+
+| dup2 | 1 | Filesystem | sys_dup2() |
++-------------------+-----------+-----------------+-------------------------+
+| execve | 2 | Filesystem | sys_execve() |
++-------------------+-----------+-----------------+-------------------------+
+| fcntl | 8779 | Filesystem | sys_fcntl() |
++-------------------+-----------+-----------------+-------------------------+
+| statfs | 1 | Filesystem | sys_statfs() |
++-------------------+-----------+-----------------+-------------------------+
+| epoll_create | 2 | Filesystem | sys_epoll_create() |
++-------------------+-----------+-----------------+-------------------------+
+| epoll_ctl | 64 | Filesystem | sys_epoll_ctl() |
++-------------------+-----------+-----------------+-------------------------+
+| newfstatat | 8318 | Filesystem | sys_newfstatat() |
++-------------------+-----------+-----------------+-------------------------+
+| eventfd2 | 192 | Filesystem | sys_eventfd2() |
++-------------------+-----------+-----------------+-------------------------+
+| mmap | 243 | Memory Mgmt. | sys_mmap() |
++-------------------+-----------+-----------------+-------------------------+
+| mprotect | 32 | Memory Mgmt. | sys_mprotect() |
++-------------------+-----------+-----------------+-------------------------+
+| brk | 21 | Memory Mgmt. | sys_brk() |
++-------------------+-----------+-----------------+-------------------------+
+| munmap | 128 | Memory Mgmt. | sys_munmap() |
++-------------------+-----------+-----------------+-------------------------+
+| set_mempolicy | 156 | Memory Mgmt. | sys_set_mempolicy() |
++-------------------+-----------+-----------------+-------------------------+
+| set_tid_address | 1 | Process Mgmt. | sys_set_tid_address() |
++-------------------+-----------+-----------------+-------------------------+
+| set_robust_list | 1 | Futex | sys_set_robust_list() |
++-------------------+-----------+-----------------+-------------------------+
+| futex | 341 | Futex | sys_futex() |
++-------------------+-----------+-----------------+-------------------------+
+| sched_getaffinity | 79 | Scheduler | sys_sched_getaffinity() |
++-------------------+-----------+-----------------+-------------------------+
+| sched_setaffinity | 223 | Scheduler | sys_sched_setaffinity() |
++-------------------+-----------+-----------------+-------------------------+
+| socketpair | 202 | Network | sys_socketpair() |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigprocmask | 21 | Signal | sys_rt_sigprocmask() |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigaction | 36 | Signal | sys_rt_sigaction() |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigreturn | 2 | Signal | sys_rt_sigreturn() |
++-------------------+-----------+-----------------+-------------------------+
+| wait4 | 889 | Time | sys_wait4() |
++-------------------+-----------+-----------------+-------------------------+
+| clock_nanosleep | 37 | Time | sys_clock_nanosleep() |
++-------------------+-----------+-----------------+-------------------------+
+| capget | 4 | Capability | sys_capget() |
++-------------------+-----------+-----------------+-------------------------+
+
+Tracing stress-ng netdev stressor workload
+------------------------------------------
+
+Run the following command to trace stress-ng netdev stressor workload::
+
+ strace -c stress-ng --netdev 1 -t 60 --metrics
+
+**System Calls made by the workload**
+
+The below table shows the system calls invoked by the workload, number of
+times each system call is invoked, and the corresponding Linux subsystem.
+
++-------------------+-----------+-----------------+-------------------------+
+| System Call | # calls | Linux Subsystem | System Call (API) |
++===================+===========+=================+=========================+
+| openat | 74 | Filesystem | sys_openat() |
++-------------------+-----------+-----------------+-------------------------+
+| close | 75 | Filesystem | sys_close() |
++-------------------+-----------+-----------------+-------------------------+
+| read | 58 | Filesystem | sys_read() |
++-------------------+-----------+-----------------+-------------------------+
+| fstat | 20 | Filesystem | sys_fstat() |
++-------------------+-----------+-----------------+-------------------------+
+| flock | 10 | Filesystem | sys_flock() |
++-------------------+-----------+-----------------+-------------------------+
+| write | 7 | Filesystem | sys_write() |
++-------------------+-----------+-----------------+-------------------------+
+| getdents64 | 8 | Filesystem | sys_getdents64() |
++-------------------+-----------+-----------------+-------------------------+
+| pread64 | 8 | Filesystem | sys_pread64() |
++-------------------+-----------+-----------------+-------------------------+
+| lseek | 1 | Filesystem | sys_lseek() |
++-------------------+-----------+-----------------+-------------------------+
+| access | 2 | Filesystem | sys_access() |
++-------------------+-----------+-----------------+-------------------------+
+| getcwd | 1 | Filesystem | sys_getcwd() |
++-------------------+-----------+-----------------+-------------------------+
+| execve | 1 | Filesystem | sys_execve() |
++-------------------+-----------+-----------------+-------------------------+
+| mmap | 61 | Memory Mgmt. | sys_mmap() |
++-------------------+-----------+-----------------+-------------------------+
+| munmap | 3 | Memory Mgmt. | sys_munmap() |
++-------------------+-----------+-----------------+-------------------------+
+| mprotect | 20 | Memory Mgmt. | sys_mprotect() |
++-------------------+-----------+-----------------+-------------------------+
+| mlock | 2 | Memory Mgmt. | sys_mlock() |
++-------------------+-----------+-----------------+-------------------------+
+| brk | 3 | Memory Mgmt. | sys_brk() |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigaction | 21 | Signal | sys_rt_sigaction() |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigprocmask | 1 | Signal | sys_rt_sigprocmask() |
++-------------------+-----------+-----------------+-------------------------+
+| sigaltstack | 1 | Signal | sys_sigaltstack() |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigreturn | 1 | Signal | sys_rt_sigreturn() |
++-------------------+-----------+-----------------+-------------------------+
+| getpid | 8 | Process Mgmt. | sys_getpid() |
++-------------------+-----------+-----------------+-------------------------+
+| prlimit64 | 5 | Process Mgmt. | sys_prlimit64() |
++-------------------+-----------+-----------------+-------------------------+
+| arch_prctl | 2 | Process Mgmt. | sys_arch_prctl() |
++-------------------+-----------+-----------------+-------------------------+
+| sysinfo | 2 | Process Mgmt. | sys_sysinfo() |
++-------------------+-----------+-----------------+-------------------------+
+| getuid | 2 | Process Mgmt. | sys_getuid() |
++-------------------+-----------+-----------------+-------------------------+
+| uname | 1 | Process Mgmt. | sys_uname() |
++-------------------+-----------+-----------------+-------------------------+
+| setpgid | 1 | Process Mgmt. | sys_setpgid() |
++-------------------+-----------+-----------------+-------------------------+
+| getrusage | 1 | Process Mgmt. | sys_getrusage() |
++-------------------+-----------+-----------------+-------------------------+
+| geteuid | 1 | Process Mgmt. | sys_geteuid() |
++-------------------+-----------+-----------------+-------------------------+
+| getppid | 1 | Process Mgmt. | sys_getppid() |
++-------------------+-----------+-----------------+-------------------------+
+| sendto | 3 | Network | sys_sendto() |
++-------------------+-----------+-----------------+-------------------------+
+| connect | 1 | Network | sys_connect() |
++-------------------+-----------+-----------------+-------------------------+
+| socket | 1 | Network | sys_socket() |
++-------------------+-----------+-----------------+-------------------------+
+| clone | 1 | Process Mgmt. | sys_clone() |
++-------------------+-----------+-----------------+-------------------------+
+| set_tid_address | 1 | Process Mgmt. | sys_set_tid_address() |
++-------------------+-----------+-----------------+-------------------------+
+| wait4 | 2 | Time | sys_wait4() |
++-------------------+-----------+-----------------+-------------------------+
+| alarm | 1 | Time | sys_alarm() |
++-------------------+-----------+-----------------+-------------------------+
+| set_robust_list | 1 | Futex | sys_set_robust_list() |
++-------------------+-----------+-----------------+-------------------------+
+
+Tracing paxtest kiddie workload
+-------------------------------
+
+Run the following command to trace paxtest kiddie workload::
+
+ strace -c paxtest kiddie
+
+**System Calls made by the workload**
+
+The below table shows the system calls invoked by the workload, number of
+times each system call is invoked, and the corresponding Linux subsystem.
+
++-------------------+-----------+-----------------+----------------------+
+| System Call | # calls | Linux Subsystem | System Call (API) |
++===================+===========+=================+======================+
+| read | 3 | Filesystem | sys_read() |
++-------------------+-----------+-----------------+----------------------+
+| write | 11 | Filesystem | sys_write() |
++-------------------+-----------+-----------------+----------------------+
+| close | 41 | Filesystem | sys_close() |
++-------------------+-----------+-----------------+----------------------+
+| stat | 24 | Filesystem | sys_stat() |
++-------------------+-----------+-----------------+----------------------+
+| fstat | 2 | Filesystem | sys_fstat() |
++-------------------+-----------+-----------------+----------------------+
+| pread64 | 6 | Filesystem | sys_pread64() |
++-------------------+-----------+-----------------+----------------------+
+| access | 1 | Filesystem | sys_access() |
++-------------------+-----------+-----------------+----------------------+
+| pipe | 1 | Filesystem | sys_pipe() |
++-------------------+-----------+-----------------+----------------------+
+| dup2 | 24 | Filesystem | sys_dup2() |
++-------------------+-----------+-----------------+----------------------+
+| execve | 1 | Filesystem | sys_execve() |
++-------------------+-----------+-----------------+----------------------+
+| fcntl | 26 | Filesystem | sys_fcntl() |
++-------------------+-----------+-----------------+----------------------+
+| openat | 14 | Filesystem | sys_openat() |
++-------------------+-----------+-----------------+----------------------+
+| rt_sigaction | 7 | Signal | sys_rt_sigaction() |
++-------------------+-----------+-----------------+----------------------+
+| rt_sigreturn | 38 | Signal | sys_rt_sigreturn() |
++-------------------+-----------+-----------------+----------------------+
+| clone | 38 | Process Mgmt. | sys_clone() |
++-------------------+-----------+-----------------+----------------------+
+| wait4 | 44 | Time | sys_wait4() |
++-------------------+-----------+-----------------+----------------------+
+| mmap | 7 | Memory Mgmt. | sys_mmap() |
++-------------------+-----------+-----------------+----------------------+
+| mprotect | 3 | Memory Mgmt. | sys_mprotect() |
++-------------------+-----------+-----------------+----------------------+
+| munmap | 1 | Memory Mgmt. | sys_munmap() |
++-------------------+-----------+-----------------+----------------------+
+| brk | 3 | Memory Mgmt. | sys_brk() |
++-------------------+-----------+-----------------+----------------------+
+| getpid | 1 | Process Mgmt. | sys_getpid() |
++-------------------+-----------+-----------------+----------------------+
+| getuid | 1 | Process Mgmt. | sys_getuid() |
++-------------------+-----------+-----------------+----------------------+
+| getgid | 1 | Process Mgmt. | sys_getgid() |
++-------------------+-----------+-----------------+----------------------+
+| geteuid | 2 | Process Mgmt. | sys_geteuid() |
++-------------------+-----------+-----------------+----------------------+
+| getegid | 1 | Process Mgmt. | sys_getegid() |
++-------------------+-----------+-----------------+----------------------+
+| getppid | 1 | Process Mgmt. | sys_getppid() |
++-------------------+-----------+-----------------+----------------------+
+| arch_prctl | 2 | Process Mgmt. | sys_arch_prctl() |
++-------------------+-----------+-----------------+----------------------+
+
+Conclusion
+==========
+
+This document is intended to be used as a guide on how to gather fine-grained
+information on the resources in use by workloads using strace.
+
+References
+==========
+
+ * `Discovery Linux Kernel Subsystems used by OpenAPS <https://elisa.tech/blog/2022/02/02/discovery-linux-kernel-subsystems-used-by-openaps>`_
+ * `ELISA-White-Papers-Discovering Linux kernel subsystems used by a workload <https://github.com/elisa-tech/ELISA-White-Papers/blob/master/Processes/Discovering_Linux_kernel_subsystems_used_by_a_workload.md>`_
+ * `strace <https://man7.org/linux/man-pages/man1/strace.1.html>`_
+ * `perf <https://man7.org/linux/man-pages/man1/perf.1.html>`_
+ * `paxtest README <https://github.com/opntr/paxtest-freebsd/blob/hardenedbsd/0.9.14-hbsd/README>`_
+ * `stress-ng <https://www.mankier.com/1/stress-ng>`_
+ * `Monitoring and managing system status and performance <https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/monitoring_and_managing_system_status_and_performance/index>`_
diff --git a/Documentation/admin-guide/xfs.rst b/Documentation/admin-guide/xfs.rst
index 8de008c..e256141 100644
--- a/Documentation/admin-guide/xfs.rst
+++ b/Documentation/admin-guide/xfs.rst
@@ -296,7 +296,7 @@
XFS_ERRLEVEL_LOW: 1
XFS_ERRLEVEL_HIGH: 5
- fs.xfs.panic_mask (Min: 0 Default: 0 Max: 256)
+ fs.xfs.panic_mask (Min: 0 Default: 0 Max: 511)
Causes certain error conditions to call BUG(). Value is a bitmask;
OR together the tags which represent errors which should cause panics:
diff --git a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
index 96fe10e..ffeccdd 100644
--- a/Documentation/arm64/booting.rst
+++ b/Documentation/arm64/booting.rst
@@ -223,7 +223,7 @@
For systems with a GICv3 interrupt controller to be used in v3 mode:
- If EL3 is present:
- - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
+ - ICC_SRE_EL3.Enable (bit 3) must be initialised to 0b1.
- ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
- ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
all CPUs the kernel is executing on, and must stay constant
@@ -369,6 +369,16 @@
- HCR_EL2.ATA (bit 56) must be initialised to 0b1.
+ For CPUs with the Scalable Matrix Extension version 2 (FEAT_SME2):
+
+ - If EL3 is present:
+
+ - SMCR_EL3.EZT0 (bit 30) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+ - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1.
+
The requirements described above for CPU mode, caches, MMUs, architected
timers, coherency and system registers apply to all CPUs. All CPUs must
enter the kernel in the same exception level. Where the values documented
diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst
index 6fed84f..83e57e4d 100644
--- a/Documentation/arm64/elf_hwcaps.rst
+++ b/Documentation/arm64/elf_hwcaps.rst
@@ -14,7 +14,7 @@
implementations, and/or with certain kernel configurations, but have no
architected discovery mechanism available to userspace code at EL0. The
kernel exposes the presence of these features to userspace through a set
-of flags called hwcaps, exposed in the auxilliary vector.
+of flags called hwcaps, exposed in the auxiliary vector.
Userspace software can test for features by acquiring the AT_HWCAP or
AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
@@ -284,6 +284,24 @@
HWCAP2_SVE2P1
Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
+HWCAP2_SME2
+ Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
+
+HWCAP2_SME2P1
+ Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0010.
+
+HWCAP2_SMEI16I32
+ Functionality implied by ID_AA64SMFR0_EL1.I16I32 == 0b0101
+
+HWCAP2_SMEBI32I32
+ Functionality implied by ID_AA64SMFR0_EL1.BI32I32 == 0b1
+
+HWCAP2_SMEB16B16
+ Functionality implied by ID_AA64SMFR0_EL1.B16B16 == 0b1
+
+HWCAP2_SMEF16F16
+ Functionality implied by ID_AA64SMFR0_EL1.F16F16 == 0b1
+
4. Unused AT_HWCAP bits
-----------------------
diff --git a/Documentation/arm64/sme.rst b/Documentation/arm64/sme.rst
index 16d2db4..1c43ea1 100644
--- a/Documentation/arm64/sme.rst
+++ b/Documentation/arm64/sme.rst
@@ -18,14 +18,19 @@
1. General
-----------
-* PSTATE.SM, PSTATE.ZA, the streaming mode vector length, the ZA
- register state and TPIDR2_EL0 are tracked per thread.
+* PSTATE.SM, PSTATE.ZA, the streaming mode vector length, the ZA and (when
+ present) ZTn register state and TPIDR2_EL0 are tracked per thread.
* The presence of SME is reported to userspace via HWCAP2_SME in the aux vector
AT_HWCAP2 entry. Presence of this flag implies the presence of the SME
instructions and registers, and the Linux-specific system interfaces
described in this document. SME is reported in /proc/cpuinfo as "sme".
+* The presence of SME2 is reported to userspace via HWCAP2_SME2 in the
+ aux vector AT_HWCAP2 entry. Presence of this flag implies the presence of
+ the SME2 instructions and ZT0, and the Linux-specific system interfaces
+ described in this document. SME2 is reported in /proc/cpuinfo as "sme2".
+
* Support for the execution of SME instructions in userspace can also be
detected by reading the CPU ID register ID_AA64PFR1_EL1 using an MRS
instruction, and checking that the value of the SME field is nonzero. [3]
@@ -44,6 +49,7 @@
HWCAP2_SME_B16F32
HWCAP2_SME_F32F32
HWCAP2_SME_FA64
+ HWCAP2_SME2
This list may be extended over time as the SME architecture evolves.
@@ -52,8 +58,8 @@
cpu-feature-registers.txt for details.
* Debuggers should restrict themselves to interacting with the target via the
- NT_ARM_SVE, NT_ARM_SSVE and NT_ARM_ZA regsets. The recommended way
- of detecting support for these regsets is to connect to a target process
+ NT_ARM_SVE, NT_ARM_SSVE, NT_ARM_ZA and NT_ARM_ZT regsets. The recommended
+ way of detecting support for these regsets is to connect to a target process
first and then attempt a
ptrace(PTRACE_GETREGSET, pid, NT_ARM_<regset>, &iov).
@@ -89,13 +95,13 @@
-------------------------
* On syscall PSTATE.ZA is preserved, if PSTATE.ZA==1 then the contents of the
- ZA matrix are preserved.
+ ZA matrix and ZTn (if present) are preserved.
* On syscall PSTATE.SM will be cleared and the SVE registers will be handled
as per the standard SVE ABI.
-* Neither the SVE registers nor ZA are used to pass arguments to or receive
- results from any syscall.
+* None of the SVE registers, ZA or ZTn are used to pass arguments to
+ or receive results from any syscall.
* On process creation (eg, clone()) the newly created process will have
PSTATE.SM cleared.
@@ -111,6 +117,9 @@
* Signal handlers are invoked with streaming mode and ZA disabled.
+* A new signal frame record TPIDR2_MAGIC is added formatted as a struct
+ tpidr2_context to allow access to TPIDR2_EL0 from signal handlers.
+
* A new signal frame record za_context encodes the ZA register contents on
signal delivery. [1]
@@ -134,6 +143,14 @@
__reserved[] referencing this space. za_context is then written in the
extra space. Refer to [1] for further details about this mechanism.
+* If ZTn is supported and PSTATE.ZA==1 then a signal frame record for ZTn will
+ be generated.
+
+* The signal record for ZTn has magic ZT_MAGIC (0x5a544e01) and consists of a
+ standard signal frame header followed by a struct zt_context specifying
+ the number of ZTn registers supported by the system, then zt_context.nregs
+ blocks of 64 bytes of data per register.
+
5. Signal return
-----------------
@@ -151,6 +168,9 @@
the signal frame does not match the current vector length, the signal return
attempt is treated as illegal, resulting in a forced SIGSEGV.
+* If ZTn is not supported or PSTATE.ZA==0 then it is illegal to have a
+ signal frame record for ZTn, resulting in a forced SIGSEGV.
+
6. prctl extensions
--------------------
@@ -214,8 +234,8 @@
vector length that will be applied at the next execve() by the calling
thread.
- * Changing the vector length causes all of ZA, P0..P15, FFR and all bits of
- Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+ * Changing the vector length causes all of ZA, ZTn, P0..P15, FFR and all
+ bits of Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
unspecified, including both streaming and non-streaming SVE state.
Calling PR_SME_SET_VL with vl equal to the thread's current vector
length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,
@@ -317,6 +337,15 @@
* The effect of writing a partial, incomplete payload is unspecified.
+* A new regset NT_ARM_ZT is defined for access to ZTn state via
+ PTRACE_GETREGSET and PTRACE_SETREGSET.
+
+* The NT_ARM_ZT regset consists of a single 512 bit register.
+
+* When PSTATE.ZA==0 reads of NT_ARM_ZT will report all bits of ZTn as 0.
+
+* Writes to NT_ARM_ZT will set PSTATE.ZA to 1.
+
8. ELF coredump extensions
---------------------------
@@ -331,6 +360,11 @@
been read if a PTRACE_GETREGSET of NT_ARM_ZA were executed for each thread
when the coredump was generated.
+* A NT_ARM_ZT note will be added to each coredump for each thread of the
+ dumped process. The contents will be equivalent to the data that would have
+ been read if a PTRACE_GETREGSET of NT_ARM_ZT were executed for each thread
+ when the coredump was generated.
+
* The NT_ARM_TLS note will be extended to two registers, the second register
will contain TPIDR2_EL0 on systems that support SME and will be read as
zero with writes ignored otherwise.
@@ -406,6 +440,9 @@
For best system performance it is strongly encouraged for software to enable
ZA only when it is actively being used.
+* A new ZT0 register is introduced when SME2 is present. This is a 512 bit
+ register which is accessible when PSTATE.ZA is set, as ZA itself is.
+
* Two new 1 bit fields in PSTATE which may be controlled via the SMSTART and
SMSTOP instructions or by access to the SVCR system register:
diff --git a/Documentation/arm64/sve.rst b/Documentation/arm64/sve.rst
index c7a356b..1b90a30 100644
--- a/Documentation/arm64/sve.rst
+++ b/Documentation/arm64/sve.rst
@@ -175,7 +175,7 @@
When returning from a signal handler:
* If there is no sve_context record in the signal frame, or if the record is
- present but contains no register data as desribed in the previous section,
+ present but contains no register data as described in the previous section,
then the SVE registers/bits become non-live and take unspecified values.
* If sve_context is present in the signal frame and contains full register
@@ -223,7 +223,7 @@
Defer the requested vector length change until the next execve()
performed by this thread.
- The effect is equivalent to implicit exceution of the following
+ The effect is equivalent to implicit execution of the following
call immediately after the next execve() (if any) by the thread:
prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)
diff --git a/Documentation/atomic_t.txt b/Documentation/atomic_t.txt
index 0f1ffa03..d7adc6d 100644
--- a/Documentation/atomic_t.txt
+++ b/Documentation/atomic_t.txt
@@ -324,7 +324,7 @@
Specifically 'simple' cmpxchg() loops are expected to not starve one another
indefinitely. However, this is not evident on LL/SC architectures, because
-while an LL/SC architecure 'can/should/must' provide forward progress
+while an LL/SC architecture 'can/should/must' provide forward progress
guarantees between competing LL/SC sections, such a guarantee does not
transfer to cmpxchg() implemented using LL/SC. Consider:
diff --git a/Documentation/bpf/bpf_design_QA.rst b/Documentation/bpf/bpf_design_QA.rst
index cec2371..bfff0e7 100644
--- a/Documentation/bpf/bpf_design_QA.rst
+++ b/Documentation/bpf/bpf_design_QA.rst
@@ -208,6 +208,10 @@
kernel internals are subject to change and can break with newer kernels
such that the program needs to be adapted accordingly.
+New BPF functionality is generally added through the use of kfuncs instead of
+new helpers. Kfuncs are not considered part of the stable API, and have their own
+lifecycle expectations as described in :ref:`BPF_kfunc_lifecycle_expectations`.
+
Q: Are tracepoints part of the stable ABI?
------------------------------------------
A: NO. Tracepoints are tied to internal implementation details hence they are
@@ -236,8 +240,8 @@
Q: Can BPF call arbitrary kernel functions?
-------------------------------------------
-A: NO. BPF programs can only call a set of helper functions which
-is defined for every program type.
+A: NO. BPF programs can only call specific functions exposed as BPF helpers or
+kfuncs. The set of available functions is defined for every program type.
Q: Can BPF overwrite arbitrary kernel memory?
---------------------------------------------
@@ -263,7 +267,12 @@
Q: Can BPF functionality such as new program or map types, new
helpers, etc be added out of kernel module code?
-A: NO.
+A: Yes, through kfuncs and kptrs
+
+The core BPF functionality such as program types, maps and helpers cannot be
+added to by modules. However, modules can expose functionality to BPF programs
+by exporting kfuncs (which may return pointers to module-internal data
+structures as kptrs).
Q: Directly calling kernel function is an ABI?
----------------------------------------------
@@ -278,7 +287,8 @@
cc (congestion-control) implementations. If any of these kernel
functions has changed, both the in-tree and out-of-tree kernel tcp cc
implementations have to be changed. The same goes for the bpf
-programs and they have to be adjusted accordingly.
+programs and they have to be adjusted accordingly. See
+:ref:`BPF_kfunc_lifecycle_expectations` for details.
Q: Attaching to arbitrary kernel functions is an ABI?
-----------------------------------------------------
@@ -340,6 +350,7 @@
A: NO.
-Unlike map value types, there are no stability guarantees for this case. The
-whole API to work with allocated objects and any support for special fields
-inside them is unstable (since it is exposed through kfuncs).
+Unlike map value types, the API to work with allocated objects and any support
+for special fields inside them is exposed through kfuncs, and thus has the same
+lifecycle expectations as the kfuncs themselves. See
+:ref:`BPF_kfunc_lifecycle_expectations` for details.
diff --git a/Documentation/bpf/cpumasks.rst b/Documentation/bpf/cpumasks.rst
new file mode 100644
index 0000000..24bef9c
--- /dev/null
+++ b/Documentation/bpf/cpumasks.rst
@@ -0,0 +1,393 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _cpumasks-header-label:
+
+==================
+BPF cpumask kfuncs
+==================
+
+1. Introduction
+===============
+
+``struct cpumask`` is a bitmap data structure in the kernel whose indices
+reflect the CPUs on the system. Commonly, cpumasks are used to track which CPUs
+a task is affinitized to, but they can also be used to e.g. track which cores
+are associated with a scheduling domain, which cores on a machine are idle,
+etc.
+
+BPF provides programs with a set of :ref:`kfuncs-header-label` that can be
+used to allocate, mutate, query, and free cpumasks.
+
+2. BPF cpumask objects
+======================
+
+There are two different types of cpumasks that can be used by BPF programs.
+
+2.1 ``struct bpf_cpumask *``
+----------------------------
+
+``struct bpf_cpumask *`` is a cpumask that is allocated by BPF, on behalf of a
+BPF program, and whose lifecycle is entirely controlled by BPF. These cpumasks
+are RCU-protected, can be mutated, can be used as kptrs, and can be safely cast
+to a ``struct cpumask *``.
+
+2.1.1 ``struct bpf_cpumask *`` lifecycle
+----------------------------------------
+
+A ``struct bpf_cpumask *`` is allocated, acquired, and released, using the
+following functions:
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_create
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_acquire
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_release
+
+For example:
+
+.. code-block:: c
+
+ struct cpumask_map_value {
+ struct bpf_cpumask __kptr_ref * cpumask;
+ };
+
+ struct array_map {
+ __uint(type, BPF_MAP_TYPE_ARRAY);
+ __type(key, int);
+ __type(value, struct cpumask_map_value);
+ __uint(max_entries, 65536);
+ } cpumask_map SEC(".maps");
+
+ static int cpumask_map_insert(struct bpf_cpumask *mask, u32 pid)
+ {
+ struct cpumask_map_value local, *v;
+ long status;
+ struct bpf_cpumask *old;
+ u32 key = pid;
+
+ local.cpumask = NULL;
+ status = bpf_map_update_elem(&cpumask_map, &key, &local, 0);
+ if (status) {
+ bpf_cpumask_release(mask);
+ return status;
+ }
+
+ v = bpf_map_lookup_elem(&cpumask_map, &key);
+ if (!v) {
+ bpf_cpumask_release(mask);
+ return -ENOENT;
+ }
+
+ old = bpf_kptr_xchg(&v->cpumask, mask);
+ if (old)
+ bpf_cpumask_release(old);
+
+ return 0;
+ }
+
+ /**
+ * A sample tracepoint showing how a task's cpumask can be queried and
+ * recorded as a kptr.
+ */
+ SEC("tp_btf/task_newtask")
+ int BPF_PROG(record_task_cpumask, struct task_struct *task, u64 clone_flags)
+ {
+ struct bpf_cpumask *cpumask;
+ int ret;
+
+ cpumask = bpf_cpumask_create();
+ if (!cpumask)
+ return -ENOMEM;
+
+ if (!bpf_cpumask_full(task->cpus_ptr))
+ bpf_printk("task %s has CPU affinity", task->comm);
+
+ bpf_cpumask_copy(cpumask, task->cpus_ptr);
+ return cpumask_map_insert(cpumask, task->pid);
+ }
+
+----
+
+2.1.1 ``struct bpf_cpumask *`` as kptrs
+---------------------------------------
+
+As mentioned and illustrated above, these ``struct bpf_cpumask *`` objects can
+also be stored in a map and used as kptrs. If a ``struct bpf_cpumask *`` is in
+a map, the reference can be removed from the map with bpf_kptr_xchg(), or
+opportunistically acquired with bpf_cpumask_kptr_get():
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_kptr_get
+
+Here is an example of a ``struct bpf_cpumask *`` being retrieved from a map:
+
+.. code-block:: c
+
+ /* struct containing the struct bpf_cpumask kptr which is stored in the map. */
+ struct cpumasks_kfunc_map_value {
+ struct bpf_cpumask __kptr_ref * bpf_cpumask;
+ };
+
+ /* The map containing struct cpumasks_kfunc_map_value entries. */
+ struct {
+ __uint(type, BPF_MAP_TYPE_ARRAY);
+ __type(key, int);
+ __type(value, struct cpumasks_kfunc_map_value);
+ __uint(max_entries, 1);
+ } cpumasks_kfunc_map SEC(".maps");
+
+ /* ... */
+
+ /**
+ * A simple example tracepoint program showing how a
+ * struct bpf_cpumask * kptr that is stored in a map can
+ * be acquired using the bpf_cpumask_kptr_get() kfunc.
+ */
+ SEC("tp_btf/cgroup_mkdir")
+ int BPF_PROG(cgrp_ancestor_example, struct cgroup *cgrp, const char *path)
+ {
+ struct bpf_cpumask *kptr;
+ struct cpumasks_kfunc_map_value *v;
+ u32 key = 0;
+
+ /* Assume a bpf_cpumask * kptr was previously stored in the map. */
+ v = bpf_map_lookup_elem(&cpumasks_kfunc_map, &key);
+ if (!v)
+ return -ENOENT;
+
+ /* Acquire a reference to the bpf_cpumask * kptr that's already stored in the map. */
+ kptr = bpf_cpumask_kptr_get(&v->cpumask);
+ if (!kptr)
+ /* If no bpf_cpumask was present in the map, it's because
+ * we're racing with another CPU that removed it with
+ * bpf_kptr_xchg() between the bpf_map_lookup_elem()
+ * above, and our call to bpf_cpumask_kptr_get().
+ * bpf_cpumask_kptr_get() internally safely handles this
+ * race, and will return NULL if the cpumask is no longer
+ * present in the map by the time we invoke the kfunc.
+ */
+ return -EBUSY;
+
+ /* Free the reference we just took above. Note that the
+ * original struct bpf_cpumask * kptr is still in the map. It will
+ * be freed either at a later time if another context deletes
+ * it from the map, or automatically by the BPF subsystem if
+ * it's still present when the map is destroyed.
+ */
+ bpf_cpumask_release(kptr);
+
+ return 0;
+ }
+
+----
+
+2.2 ``struct cpumask``
+----------------------
+
+``struct cpumask`` is the object that actually contains the cpumask bitmap
+being queried, mutated, etc. A ``struct bpf_cpumask`` wraps a ``struct
+cpumask``, which is why it's safe to cast it as such (note however that it is
+**not** safe to cast a ``struct cpumask *`` to a ``struct bpf_cpumask *``, and
+the verifier will reject any program that tries to do so).
+
+As we'll see below, any kfunc that mutates its cpumask argument will take a
+``struct bpf_cpumask *`` as that argument. Any argument that simply queries the
+cpumask will instead take a ``struct cpumask *``.
+
+3. cpumask kfuncs
+=================
+
+Above, we described the kfuncs that can be used to allocate, acquire, release,
+etc a ``struct bpf_cpumask *``. This section of the document will describe the
+kfuncs for mutating and querying cpumasks.
+
+3.1 Mutating cpumasks
+---------------------
+
+Some cpumask kfuncs are "read-only" in that they don't mutate any of their
+arguments, whereas others mutate at least one argument (which means that the
+argument must be a ``struct bpf_cpumask *``, as described above).
+
+This section will describe all of the cpumask kfuncs which mutate at least one
+argument. :ref:`cpumasks-querying-label` below describes the read-only kfuncs.
+
+3.1.1 Setting and clearing CPUs
+-------------------------------
+
+bpf_cpumask_set_cpu() and bpf_cpumask_clear_cpu() can be used to set and clear
+a CPU in a ``struct bpf_cpumask`` respectively:
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_set_cpu bpf_cpumask_clear_cpu
+
+These kfuncs are pretty straightforward, and can be used, for example, as
+follows:
+
+.. code-block:: c
+
+ /**
+ * A sample tracepoint showing how a cpumask can be queried.
+ */
+ SEC("tp_btf/task_newtask")
+ int BPF_PROG(test_set_clear_cpu, struct task_struct *task, u64 clone_flags)
+ {
+ struct bpf_cpumask *cpumask;
+
+ cpumask = bpf_cpumask_create();
+ if (!cpumask)
+ return -ENOMEM;
+
+ bpf_cpumask_set_cpu(0, cpumask);
+ if (!bpf_cpumask_test_cpu(0, cast(cpumask)))
+ /* Should never happen. */
+ goto release_exit;
+
+ bpf_cpumask_clear_cpu(0, cpumask);
+ if (bpf_cpumask_test_cpu(0, cast(cpumask)))
+ /* Should never happen. */
+ goto release_exit;
+
+ /* struct cpumask * pointers such as task->cpus_ptr can also be queried. */
+ if (bpf_cpumask_test_cpu(0, task->cpus_ptr))
+ bpf_printk("task %s can use CPU %d", task->comm, 0);
+
+ release_exit:
+ bpf_cpumask_release(cpumask);
+ return 0;
+ }
+
+----
+
+bpf_cpumask_test_and_set_cpu() and bpf_cpumask_test_and_clear_cpu() are
+complementary kfuncs that allow callers to atomically test and set (or clear)
+CPUs:
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_test_and_set_cpu bpf_cpumask_test_and_clear_cpu
+
+----
+
+We can also set and clear entire ``struct bpf_cpumask *`` objects in one
+operation using bpf_cpumask_setall() and bpf_cpumask_clear():
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_setall bpf_cpumask_clear
+
+3.1.2 Operations between cpumasks
+---------------------------------
+
+In addition to setting and clearing individual CPUs in a single cpumask,
+callers can also perform bitwise operations between multiple cpumasks using
+bpf_cpumask_and(), bpf_cpumask_or(), and bpf_cpumask_xor():
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_and bpf_cpumask_or bpf_cpumask_xor
+
+The following is an example of how they may be used. Note that some of the
+kfuncs shown in this example will be covered in more detail below.
+
+.. code-block:: c
+
+ /**
+ * A sample tracepoint showing how a cpumask can be mutated using
+ bitwise operators (and queried).
+ */
+ SEC("tp_btf/task_newtask")
+ int BPF_PROG(test_and_or_xor, struct task_struct *task, u64 clone_flags)
+ {
+ struct bpf_cpumask *mask1, *mask2, *dst1, *dst2;
+
+ mask1 = bpf_cpumask_create();
+ if (!mask1)
+ return -ENOMEM;
+
+ mask2 = bpf_cpumask_create();
+ if (!mask2) {
+ bpf_cpumask_release(mask1);
+ return -ENOMEM;
+ }
+
+ // ...Safely create the other two masks... */
+
+ bpf_cpumask_set_cpu(0, mask1);
+ bpf_cpumask_set_cpu(1, mask2);
+ bpf_cpumask_and(dst1, (const struct cpumask *)mask1, (const struct cpumask *)mask2);
+ if (!bpf_cpumask_empty((const struct cpumask *)dst1))
+ /* Should never happen. */
+ goto release_exit;
+
+ bpf_cpumask_or(dst1, (const struct cpumask *)mask1, (const struct cpumask *)mask2);
+ if (!bpf_cpumask_test_cpu(0, (const struct cpumask *)dst1))
+ /* Should never happen. */
+ goto release_exit;
+
+ if (!bpf_cpumask_test_cpu(1, (const struct cpumask *)dst1))
+ /* Should never happen. */
+ goto release_exit;
+
+ bpf_cpumask_xor(dst2, (const struct cpumask *)mask1, (const struct cpumask *)mask2);
+ if (!bpf_cpumask_equal((const struct cpumask *)dst1,
+ (const struct cpumask *)dst2))
+ /* Should never happen. */
+ goto release_exit;
+
+ release_exit:
+ bpf_cpumask_release(mask1);
+ bpf_cpumask_release(mask2);
+ bpf_cpumask_release(dst1);
+ bpf_cpumask_release(dst2);
+ return 0;
+ }
+
+----
+
+The contents of an entire cpumask may be copied to another using
+bpf_cpumask_copy():
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_copy
+
+----
+
+.. _cpumasks-querying-label:
+
+3.2 Querying cpumasks
+---------------------
+
+In addition to the above kfuncs, there is also a set of read-only kfuncs that
+can be used to query the contents of cpumasks.
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_first bpf_cpumask_first_zero bpf_cpumask_test_cpu
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_equal bpf_cpumask_intersects bpf_cpumask_subset
+ bpf_cpumask_empty bpf_cpumask_full
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+ :identifiers: bpf_cpumask_any bpf_cpumask_any_and
+
+----
+
+Some example usages of these querying kfuncs were shown above. We will not
+replicate those exmaples here. Note, however, that all of the aforementioned
+kfuncs are tested in `tools/testing/selftests/bpf/progs/cpumask_success.c`_, so
+please take a look there if you're looking for more examples of how they can be
+used.
+
+.. _tools/testing/selftests/bpf/progs/cpumask_success.c:
+ https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/progs/cpumask_success.c
+
+
+4. Adding BPF cpumask kfuncs
+============================
+
+The set of supported BPF cpumask kfuncs are not (yet) a 1-1 match with the
+cpumask operations in include/linux/cpumask.h. Any of those cpumask operations
+could easily be encapsulated in a new kfunc if and when required. If you'd like
+to support a new cpumask operation, please feel free to submit a patch. If you
+do add a new cpumask kfunc, please document it here, and add any relevant
+selftest testcases to the cpumask selftest suite.
diff --git a/Documentation/bpf/graph_ds_impl.rst b/Documentation/bpf/graph_ds_impl.rst
new file mode 100644
index 0000000..6127462
--- /dev/null
+++ b/Documentation/bpf/graph_ds_impl.rst
@@ -0,0 +1,267 @@
+=========================
+BPF Graph Data Structures
+=========================
+
+This document describes implementation details of new-style "graph" data
+structures (linked_list, rbtree), with particular focus on the verifier's
+implementation of semantics specific to those data structures.
+
+Although no specific verifier code is referred to in this document, the document
+assumes that the reader has general knowledge of BPF verifier internals, BPF
+maps, and BPF program writing.
+
+Note that the intent of this document is to describe the current state of
+these graph data structures. **No guarantees** of stability for either
+semantics or APIs are made or implied here.
+
+.. contents::
+ :local:
+ :depth: 2
+
+Introduction
+------------
+
+The BPF map API has historically been the main way to expose data structures
+of various types for use within BPF programs. Some data structures fit naturally
+with the map API (HASH, ARRAY), others less so. Consequentially, programs
+interacting with the latter group of data structures can be hard to parse
+for kernel programmers without previous BPF experience.
+
+Luckily, some restrictions which necessitated the use of BPF map semantics are
+no longer relevant. With the introduction of kfuncs, kptrs, and the any-context
+BPF allocator, it is now possible to implement BPF data structures whose API
+and semantics more closely match those exposed to the rest of the kernel.
+
+Two such data structures - linked_list and rbtree - have many verification
+details in common. Because both have "root"s ("head" for linked_list) and
+"node"s, the verifier code and this document refer to common functionality
+as "graph_api", "graph_root", "graph_node", etc.
+
+Unless otherwise stated, examples and semantics below apply to both graph data
+structures.
+
+Unstable API
+------------
+
+Data structures implemented using the BPF map API have historically used BPF
+helper functions - either standard map API helpers like ``bpf_map_update_elem``
+or map-specific helpers. The new-style graph data structures instead use kfuncs
+to define their manipulation helpers. Because there are no stability guarantees
+for kfuncs, the API and semantics for these data structures can be evolved in
+a way that breaks backwards compatibility if necessary.
+
+Root and node types for the new data structures are opaquely defined in the
+``uapi/linux/bpf.h`` header.
+
+Locking
+-------
+
+The new-style data structures are intrusive and are defined similarly to their
+vanilla kernel counterparts:
+
+.. code-block:: c
+
+ struct node_data {
+ long key;
+ long data;
+ struct bpf_rb_node node;
+ };
+
+ struct bpf_spin_lock glock;
+ struct bpf_rb_root groot __contains(node_data, node);
+
+The "root" type for both linked_list and rbtree expects to be in a map_value
+which also contains a ``bpf_spin_lock`` - in the above example both global
+variables are placed in a single-value arraymap. The verifier considers this
+spin_lock to be associated with the ``bpf_rb_root`` by virtue of both being in
+the same map_value and will enforce that the correct lock is held when
+verifying BPF programs that manipulate the tree. Since this lock checking
+happens at verification time, there is no runtime penalty.
+
+Non-owning references
+---------------------
+
+**Motivation**
+
+Consider the following BPF code:
+
+.. code-block:: c
+
+ struct node_data *n = bpf_obj_new(typeof(*n)); /* ACQUIRED */
+
+ bpf_spin_lock(&lock);
+
+ bpf_rbtree_add(&tree, n); /* PASSED */
+
+ bpf_spin_unlock(&lock);
+
+From the verifier's perspective, the pointer ``n`` returned from ``bpf_obj_new``
+has type ``PTR_TO_BTF_ID | MEM_ALLOC``, with a ``btf_id`` of
+``struct node_data`` and a nonzero ``ref_obj_id``. Because it holds ``n``, the
+program has ownership of the pointee's (object pointed to by ``n``) lifetime.
+The BPF program must pass off ownership before exiting - either via
+``bpf_obj_drop``, which ``free``'s the object, or by adding it to ``tree`` with
+``bpf_rbtree_add``.
+
+(``ACQUIRED`` and ``PASSED`` comments in the example denote statements where
+"ownership is acquired" and "ownership is passed", respectively)
+
+What should the verifier do with ``n`` after ownership is passed off? If the
+object was ``free``'d with ``bpf_obj_drop`` the answer is obvious: the verifier
+should reject programs which attempt to access ``n`` after ``bpf_obj_drop`` as
+the object is no longer valid. The underlying memory may have been reused for
+some other allocation, unmapped, etc.
+
+When ownership is passed to ``tree`` via ``bpf_rbtree_add`` the answer is less
+obvious. The verifier could enforce the same semantics as for ``bpf_obj_drop``,
+but that would result in programs with useful, common coding patterns being
+rejected, e.g.:
+
+.. code-block:: c
+
+ int x;
+ struct node_data *n = bpf_obj_new(typeof(*n)); /* ACQUIRED */
+
+ bpf_spin_lock(&lock);
+
+ bpf_rbtree_add(&tree, n); /* PASSED */
+ x = n->data;
+ n->data = 42;
+
+ bpf_spin_unlock(&lock);
+
+Both the read from and write to ``n->data`` would be rejected. The verifier
+can do better, though, by taking advantage of two details:
+
+ * Graph data structure APIs can only be used when the ``bpf_spin_lock``
+ associated with the graph root is held
+
+ * Both graph data structures have pointer stability
+
+ * Because graph nodes are allocated with ``bpf_obj_new`` and
+ adding / removing from the root involves fiddling with the
+ ``bpf_{list,rb}_node`` field of the node struct, a graph node will
+ remain at the same address after either operation.
+
+Because the associated ``bpf_spin_lock`` must be held by any program adding
+or removing, if we're in the critical section bounded by that lock, we know
+that no other program can add or remove until the end of the critical section.
+This combined with pointer stability means that, until the critical section
+ends, we can safely access the graph node through ``n`` even after it was used
+to pass ownership.
+
+The verifier considers such a reference a *non-owning reference*. The ref
+returned by ``bpf_obj_new`` is accordingly considered an *owning reference*.
+Both terms currently only have meaning in the context of graph nodes and API.
+
+**Details**
+
+Let's enumerate the properties of both types of references.
+
+*owning reference*
+
+ * This reference controls the lifetime of the pointee
+
+ * Ownership of pointee must be 'released' by passing it to some graph API
+ kfunc, or via ``bpf_obj_drop``, which ``free``'s the pointee
+
+ * If not released before program ends, verifier considers program invalid
+
+ * Access to the pointee's memory will not page fault
+
+*non-owning reference*
+
+ * This reference does not own the pointee
+
+ * It cannot be used to add the graph node to a graph root, nor ``free``'d via
+ ``bpf_obj_drop``
+
+ * No explicit control of lifetime, but can infer valid lifetime based on
+ non-owning ref existence (see explanation below)
+
+ * Access to the pointee's memory will not page fault
+
+From verifier's perspective non-owning references can only exist
+between spin_lock and spin_unlock. Why? After spin_unlock another program
+can do arbitrary operations on the data structure like removing and ``free``-ing
+via bpf_obj_drop. A non-owning ref to some chunk of memory that was remove'd,
+``free``'d, and reused via bpf_obj_new would point to an entirely different thing.
+Or the memory could go away.
+
+To prevent this logic violation all non-owning references are invalidated by the
+verifier after a critical section ends. This is necessary to ensure the "will
+not page fault" property of non-owning references. So if the verifier hasn't
+invalidated a non-owning ref, accessing it will not page fault.
+
+Currently ``bpf_obj_drop`` is not allowed in the critical section, so
+if there's a valid non-owning ref, we must be in a critical section, and can
+conclude that the ref's memory hasn't been dropped-and- ``free``'d or
+dropped-and-reused.
+
+Any reference to a node that is in an rbtree _must_ be non-owning, since
+the tree has control of the pointee's lifetime. Similarly, any ref to a node
+that isn't in rbtree _must_ be owning. This results in a nice property:
+graph API add / remove implementations don't need to check if a node
+has already been added (or already removed), as the ownership model
+allows the verifier to prevent such a state from being valid by simply checking
+types.
+
+However, pointer aliasing poses an issue for the above "nice property".
+Consider the following example:
+
+.. code-block:: c
+
+ struct node_data *n, *m, *o, *p;
+ n = bpf_obj_new(typeof(*n)); /* 1 */
+
+ bpf_spin_lock(&lock);
+
+ bpf_rbtree_add(&tree, n); /* 2 */
+ m = bpf_rbtree_first(&tree); /* 3 */
+
+ o = bpf_rbtree_remove(&tree, n); /* 4 */
+ p = bpf_rbtree_remove(&tree, m); /* 5 */
+
+ bpf_spin_unlock(&lock);
+
+ bpf_obj_drop(o);
+ bpf_obj_drop(p); /* 6 */
+
+Assume the tree is empty before this program runs. If we track verifier state
+changes here using numbers in above comments:
+
+ 1) n is an owning reference
+
+ 2) n is a non-owning reference, it's been added to the tree
+
+ 3) n and m are non-owning references, they both point to the same node
+
+ 4) o is an owning reference, n and m non-owning, all point to same node
+
+ 5) o and p are owning, n and m non-owning, all point to the same node
+
+ 6) a double-free has occurred, since o and p point to same node and o was
+ ``free``'d in previous statement
+
+States 4 and 5 violate our "nice property", as there are non-owning refs to
+a node which is not in an rbtree. Statement 5 will try to remove a node which
+has already been removed as a result of this violation. State 6 is a dangerous
+double-free.
+
+At a minimum we should prevent state 6 from being possible. If we can't also
+prevent state 5 then we must abandon our "nice property" and check whether a
+node has already been removed at runtime.
+
+We prevent both by generalizing the "invalidate non-owning references" behavior
+of ``bpf_spin_unlock`` and doing similar invalidation after
+``bpf_rbtree_remove``. The logic here being that any graph API kfunc which:
+
+ * takes an arbitrary node argument
+
+ * removes it from the data structure
+
+ * returns an owning reference to the removed node
+
+May result in a state where some other non-owning reference points to the same
+node. So ``remove``-type kfuncs must be considered a non-owning reference
+invalidation point as well.
diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst
index b81533d..dbb39e8 100644
--- a/Documentation/bpf/index.rst
+++ b/Documentation/bpf/index.rst
@@ -20,6 +20,7 @@
syscall_api
helpers
kfuncs
+ cpumasks
programs
maps
bpf_prog_run
diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst
index e672d5e..af515de 100644
--- a/Documentation/bpf/instruction-set.rst
+++ b/Documentation/bpf/instruction-set.rst
@@ -7,6 +7,11 @@
This document specifies version 1.0 of the eBPF instruction set.
+Documentation conventions
+=========================
+
+For brevity, this document uses the type notion "u64", "u32", etc.
+to mean an unsigned integer whose width is the specified number of bits.
Registers and calling convention
================================
@@ -30,20 +35,56 @@
eBPF has two instruction encodings:
* the basic instruction encoding, which uses 64 bits to encode an instruction
-* the wide instruction encoding, which appends a second 64-bit immediate value
- (imm64) after the basic instruction for a total of 128 bits.
+* the wide instruction encoding, which appends a second 64-bit immediate (i.e.,
+ constant) value after the basic instruction for a total of 128 bits.
-The basic instruction encoding looks as follows:
+The basic instruction encoding is as follows, where MSB and LSB mean the most significant
+bits and least significant bits, respectively:
-============= ======= =============== ==================== ============
-32 bits (MSB) 16 bits 4 bits 4 bits 8 bits (LSB)
-============= ======= =============== ==================== ============
-immediate offset source register destination register opcode
-============= ======= =============== ==================== ============
+============= ======= ======= ======= ============
+32 bits (MSB) 16 bits 4 bits 4 bits 8 bits (LSB)
+============= ======= ======= ======= ============
+imm offset src_reg dst_reg opcode
+============= ======= ======= ======= ============
+
+**imm**
+ signed integer immediate value
+
+**offset**
+ signed integer offset used with pointer arithmetic
+
+**src_reg**
+ the source register number (0-10), except where otherwise specified
+ (`64-bit immediate instructions`_ reuse this field for other purposes)
+
+**dst_reg**
+ destination register number (0-10)
+
+**opcode**
+ operation to perform
Note that most instructions do not use all of the fields.
Unused fields shall be cleared to zero.
+As discussed below in `64-bit immediate instructions`_, a 64-bit immediate
+instruction uses a 64-bit immediate value that is constructed as follows.
+The 64 bits following the basic instruction contain a pseudo instruction
+using the same format but with opcode, dst_reg, src_reg, and offset all set to zero,
+and imm containing the high 32 bits of the immediate value.
+
+================= ==================
+64 bits (MSB) 64 bits (LSB)
+================= ==================
+basic instruction pseudo instruction
+================= ==================
+
+Thus the 64-bit immediate value is constructed as follows:
+
+ imm64 = (next_imm << 32) | imm
+
+where 'next_imm' refers to the imm value of the pseudo instruction
+following the basic instruction.
+
Instruction classes
-------------------
@@ -71,27 +112,32 @@
============== ====== =================
4 bits (MSB) 1 bit 3 bits (LSB)
============== ====== =================
-operation code source instruction class
+code source instruction class
============== ====== =================
-The 4th bit encodes the source operand:
+**code**
+ the operation code, whose meaning varies by instruction class
- ====== ===== ========================================
+**source**
+ the source operand location, which unless otherwise specified is one of:
+
+ ====== ===== ==============================================
source value description
- ====== ===== ========================================
- BPF_K 0x00 use 32-bit immediate as source operand
- BPF_X 0x08 use 'src_reg' register as source operand
- ====== ===== ========================================
+ ====== ===== ==============================================
+ BPF_K 0x00 use 32-bit 'imm' value as source operand
+ BPF_X 0x08 use 'src_reg' register value as source operand
+ ====== ===== ==============================================
-The four MSB bits store the operation code.
-
+**instruction class**
+ the instruction class (see `Instruction classes`_)
Arithmetic instructions
-----------------------
``BPF_ALU`` uses 32-bit wide operands while ``BPF_ALU64`` uses 64-bit wide operands for
otherwise identical operations.
-The 'code' field encodes the operation as below:
+The 'code' field encodes the operation as below, where 'src' and 'dst' refer
+to the values of the source and destination registers, respectively.
======== ===== ==========================================================
code value description
@@ -99,35 +145,49 @@
BPF_ADD 0x00 dst += src
BPF_SUB 0x10 dst -= src
BPF_MUL 0x20 dst \*= src
-BPF_DIV 0x30 dst /= src
+BPF_DIV 0x30 dst = (src != 0) ? (dst / src) : 0
BPF_OR 0x40 dst \|= src
BPF_AND 0x50 dst &= src
BPF_LSH 0x60 dst <<= src
BPF_RSH 0x70 dst >>= src
BPF_NEG 0x80 dst = ~src
-BPF_MOD 0x90 dst %= src
+BPF_MOD 0x90 dst = (src != 0) ? (dst % src) : dst
BPF_XOR 0xa0 dst ^= src
BPF_MOV 0xb0 dst = src
BPF_ARSH 0xc0 sign extending shift right
BPF_END 0xd0 byte swap operations (see `Byte swap instructions`_ below)
======== ===== ==========================================================
+Underflow and overflow are allowed during arithmetic operations, meaning
+the 64-bit or 32-bit value will wrap. If eBPF program execution would
+result in division by zero, the destination register is instead set to zero.
+If execution would result in modulo by zero, for ``BPF_ALU64`` the value of
+the destination register is unchanged whereas for ``BPF_ALU`` the upper
+32 bits of the destination register are zeroed.
+
``BPF_ADD | BPF_X | BPF_ALU`` means::
- dst_reg = (u32) dst_reg + (u32) src_reg;
+ dst = (u32) ((u32) dst + (u32) src)
+
+where '(u32)' indicates that the upper 32 bits are zeroed.
``BPF_ADD | BPF_X | BPF_ALU64`` means::
- dst_reg = dst_reg + src_reg
+ dst = dst + src
``BPF_XOR | BPF_K | BPF_ALU`` means::
- dst_reg = (u32) dst_reg ^ (u32) imm32
+ dst = (u32) dst ^ (u32) imm32
``BPF_XOR | BPF_K | BPF_ALU64`` means::
- dst_reg = dst_reg ^ imm32
+ dst = dst ^ imm32
+Also note that the division and modulo operations are unsigned. Thus, for
+``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas
+for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result
+interpreted as an unsigned 64-bit value. There are no instructions for
+signed division or modulo.
Byte swap instructions
~~~~~~~~~~~~~~~~~~~~~~
@@ -155,11 +215,11 @@
``BPF_ALU | BPF_TO_LE | BPF_END`` with imm = 16 means::
- dst_reg = htole16(dst_reg)
+ dst = htole16(dst)
``BPF_ALU | BPF_TO_BE | BPF_END`` with imm = 64 means::
- dst_reg = htobe64(dst_reg)
+ dst = htobe64(dst)
Jump instructions
-----------------
@@ -234,15 +294,15 @@
``BPF_MEM | <size> | BPF_STX`` means::
- *(size *) (dst_reg + off) = src_reg
+ *(size *) (dst + offset) = src
``BPF_MEM | <size> | BPF_ST`` means::
- *(size *) (dst_reg + off) = imm32
+ *(size *) (dst + offset) = imm32
``BPF_MEM | <size> | BPF_LDX`` means::
- dst_reg = *(size *) (src_reg + off)
+ dst = *(size *) (src + offset)
Where size is one of: ``BPF_B``, ``BPF_H``, ``BPF_W``, or ``BPF_DW``.
@@ -276,11 +336,11 @@
``BPF_ATOMIC | BPF_W | BPF_STX`` with 'imm' = BPF_ADD means::
- *(u32 *)(dst_reg + off16) += src_reg
+ *(u32 *)(dst + offset) += src
``BPF_ATOMIC | BPF_DW | BPF_STX`` with 'imm' = BPF ADD means::
- *(u64 *)(dst_reg + off16) += src_reg
+ *(u64 *)(dst + offset) += src
In addition to the simple atomic operations, there also is a modifier and
two complex atomic operations:
@@ -295,16 +355,16 @@
The ``BPF_FETCH`` modifier is optional for simple atomic operations, and
always set for the complex atomic operations. If the ``BPF_FETCH`` flag
-is set, then the operation also overwrites ``src_reg`` with the value that
+is set, then the operation also overwrites ``src`` with the value that
was in memory before it was modified.
-The ``BPF_XCHG`` operation atomically exchanges ``src_reg`` with the value
-addressed by ``dst_reg + off``.
+The ``BPF_XCHG`` operation atomically exchanges ``src`` with the value
+addressed by ``dst + offset``.
The ``BPF_CMPXCHG`` operation atomically compares the value addressed by
-``dst_reg + off`` with ``R0``. If they match, the value addressed by
-``dst_reg + off`` is replaced with ``src_reg``. In either case, the
-value that was at ``dst_reg + off`` before the operation is zero-extended
+``dst + offset`` with ``R0``. If they match, the value addressed by
+``dst + offset`` is replaced with ``src``. In either case, the
+value that was at ``dst + offset`` before the operation is zero-extended
and loaded back to ``R0``.
64-bit immediate instructions
@@ -317,7 +377,7 @@
``BPF_LD | BPF_DW | BPF_IMM`` means::
- dst_reg = imm64
+ dst = imm64
Legacy BPF Packet access instructions
diff --git a/Documentation/bpf/kfuncs.rst b/Documentation/bpf/kfuncs.rst
index 9fd7fb5..ca96ef3 100644
--- a/Documentation/bpf/kfuncs.rst
+++ b/Documentation/bpf/kfuncs.rst
@@ -1,3 +1,7 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _kfuncs-header-label:
+
=============================
BPF Kernel Functions (kfuncs)
=============================
@@ -9,7 +13,7 @@
kernel which are exposed for use by BPF programs. Unlike normal BPF helpers,
kfuncs do not have a stable interface and can change from one kernel release to
another. Hence, BPF programs need to be updated in response to changes in the
-kernel.
+kernel. See :ref:`BPF_kfunc_lifecycle_expectations` for more information.
2. Defining a kfunc
===================
@@ -37,7 +41,7 @@
__diag_ignore_all("-Wmissing-prototypes",
"Global kfuncs as their definitions will be in BTF");
- struct task_struct *bpf_find_get_task_by_vpid(pid_t nr)
+ __bpf_kfunc struct task_struct *bpf_find_get_task_by_vpid(pid_t nr)
{
return find_get_task_by_vpid(nr);
}
@@ -62,7 +66,7 @@
This annotation is used to indicate a memory and size pair in the argument list.
An example is given below::
- void bpf_memzero(void *mem, int mem__sz)
+ __bpf_kfunc void bpf_memzero(void *mem, int mem__sz)
{
...
}
@@ -82,7 +86,7 @@
An example is given below::
- void *bpf_obj_new(u32 local_type_id__k, ...)
+ __bpf_kfunc void *bpf_obj_new(u32 local_type_id__k, ...)
{
...
}
@@ -121,6 +125,20 @@
This set encodes the BTF ID of each kfunc listed above, and encodes the flags
along with it. Ofcourse, it is also allowed to specify no flags.
+kfunc definitions should also always be annotated with the ``__bpf_kfunc``
+macro. This prevents issues such as the compiler inlining the kfunc if it's a
+static kernel function, or the function being elided in an LTO build as it's
+not used in the rest of the kernel. Developers should not manually add
+annotations to their kfunc to prevent these issues. If an annotation is
+required to prevent such an issue with your kfunc, it is a bug and should be
+added to the definition of the macro so that other kfuncs are similarly
+protected. An example is given below::
+
+ __bpf_kfunc struct task_struct *bpf_get_task_pid(s32 pid)
+ {
+ ...
+ }
+
2.4.1 KF_ACQUIRE flag
---------------------
@@ -163,7 +181,8 @@
The KF_TRUSTED_ARGS flag is used for kfuncs taking pointer arguments. It
indicates that the all pointer arguments are valid, and that all pointers to
BTF objects have been passed in their unmodified form (that is, at a zero
-offset, and without having been obtained from walking another pointer).
+offset, and without having been obtained from walking another pointer, with one
+exception described below).
There are two types of pointers to kernel objects which are considered "valid":
@@ -176,6 +195,25 @@
The definition of "valid" pointers is subject to change at any time, and has
absolutely no ABI stability guarantees.
+As mentioned above, a nested pointer obtained from walking a trusted pointer is
+no longer trusted, with one exception. If a struct type has a field that is
+guaranteed to be valid as long as its parent pointer is trusted, the
+``BTF_TYPE_SAFE_NESTED`` macro can be used to express that to the verifier as
+follows:
+
+.. code-block:: c
+
+ BTF_TYPE_SAFE_NESTED(struct task_struct) {
+ const cpumask_t *cpus_ptr;
+ };
+
+In other words, you must:
+
+1. Wrap the trusted pointer type in the ``BTF_TYPE_SAFE_NESTED`` macro.
+
+2. Specify the type and name of the trusted nested field. This field must match
+ the field in the original type definition exactly.
+
2.4.6 KF_SLEEPABLE flag
-----------------------
@@ -200,6 +238,28 @@
The argument may have reference count of 0 and the kfunc must take this
into consideration.
+.. _KF_deprecated_flag:
+
+2.4.9 KF_DEPRECATED flag
+------------------------
+
+The KF_DEPRECATED flag is used for kfuncs which are scheduled to be
+changed or removed in a subsequent kernel release. A kfunc that is
+marked with KF_DEPRECATED should also have any relevant information
+captured in its kernel doc. Such information typically includes the
+kfunc's expected remaining lifespan, a recommendation for new
+functionality that can replace it if any is available, and possibly a
+rationale for why it is being removed.
+
+Note that while on some occasions, a KF_DEPRECATED kfunc may continue to be
+supported and have its KF_DEPRECATED flag removed, it is likely to be far more
+difficult to remove a KF_DEPRECATED flag after it's been added than it is to
+prevent it from being added in the first place. As described in
+:ref:`BPF_kfunc_lifecycle_expectations`, users that rely on specific kfuncs are
+encouraged to make their use-cases known as early as possible, and participate
+in upstream discussions regarding whether to keep, change, deprecate, or remove
+those kfuncs if and when such discussions occur.
+
2.5 Registering the kfuncs
--------------------------
@@ -223,14 +283,150 @@
}
late_initcall(init_subsystem);
-3. Core kfuncs
+2.6 Specifying no-cast aliases with ___init
+--------------------------------------------
+
+The verifier will always enforce that the BTF type of a pointer passed to a
+kfunc by a BPF program, matches the type of pointer specified in the kfunc
+definition. The verifier, does, however, allow types that are equivalent
+according to the C standard to be passed to the same kfunc arg, even if their
+BTF_IDs differ.
+
+For example, for the following type definition:
+
+.. code-block:: c
+
+ struct bpf_cpumask {
+ cpumask_t cpumask;
+ refcount_t usage;
+ };
+
+The verifier would allow a ``struct bpf_cpumask *`` to be passed to a kfunc
+taking a ``cpumask_t *`` (which is a typedef of ``struct cpumask *``). For
+instance, both ``struct cpumask *`` and ``struct bpf_cpmuask *`` can be passed
+to bpf_cpumask_test_cpu().
+
+In some cases, this type-aliasing behavior is not desired. ``struct
+nf_conn___init`` is one such example:
+
+.. code-block:: c
+
+ struct nf_conn___init {
+ struct nf_conn ct;
+ };
+
+The C standard would consider these types to be equivalent, but it would not
+always be safe to pass either type to a trusted kfunc. ``struct
+nf_conn___init`` represents an allocated ``struct nf_conn`` object that has
+*not yet been initialized*, so it would therefore be unsafe to pass a ``struct
+nf_conn___init *`` to a kfunc that's expecting a fully initialized ``struct
+nf_conn *`` (e.g. ``bpf_ct_change_timeout()``).
+
+In order to accommodate such requirements, the verifier will enforce strict
+PTR_TO_BTF_ID type matching if two types have the exact same name, with one
+being suffixed with ``___init``.
+
+.. _BPF_kfunc_lifecycle_expectations:
+
+3. kfunc lifecycle expectations
+===============================
+
+kfuncs provide a kernel <-> kernel API, and thus are not bound by any of the
+strict stability restrictions associated with kernel <-> user UAPIs. This means
+they can be thought of as similar to EXPORT_SYMBOL_GPL, and can therefore be
+modified or removed by a maintainer of the subsystem they're defined in when
+it's deemed necessary.
+
+Like any other change to the kernel, maintainers will not change or remove a
+kfunc without having a reasonable justification. Whether or not they'll choose
+to change a kfunc will ultimately depend on a variety of factors, such as how
+widely used the kfunc is, how long the kfunc has been in the kernel, whether an
+alternative kfunc exists, what the norm is in terms of stability for the
+subsystem in question, and of course what the technical cost is of continuing
+to support the kfunc.
+
+There are several implications of this:
+
+a) kfuncs that are widely used or have been in the kernel for a long time will
+ be more difficult to justify being changed or removed by a maintainer. In
+ other words, kfuncs that are known to have a lot of users and provide
+ significant value provide stronger incentives for maintainers to invest the
+ time and complexity in supporting them. It is therefore important for
+ developers that are using kfuncs in their BPF programs to communicate and
+ explain how and why those kfuncs are being used, and to participate in
+ discussions regarding those kfuncs when they occur upstream.
+
+b) Unlike regular kernel symbols marked with EXPORT_SYMBOL_GPL, BPF programs
+ that call kfuncs are generally not part of the kernel tree. This means that
+ refactoring cannot typically change callers in-place when a kfunc changes,
+ as is done for e.g. an upstreamed driver being updated in place when a
+ kernel symbol is changed.
+
+ Unlike with regular kernel symbols, this is expected behavior for BPF
+ symbols, and out-of-tree BPF programs that use kfuncs should be considered
+ relevant to discussions and decisions around modifying and removing those
+ kfuncs. The BPF community will take an active role in participating in
+ upstream discussions when necessary to ensure that the perspectives of such
+ users are taken into account.
+
+c) A kfunc will never have any hard stability guarantees. BPF APIs cannot and
+ will not ever hard-block a change in the kernel purely for stability
+ reasons. That being said, kfuncs are features that are meant to solve
+ problems and provide value to users. The decision of whether to change or
+ remove a kfunc is a multivariate technical decision that is made on a
+ case-by-case basis, and which is informed by data points such as those
+ mentioned above. It is expected that a kfunc being removed or changed with
+ no warning will not be a common occurrence or take place without sound
+ justification, but it is a possibility that must be accepted if one is to
+ use kfuncs.
+
+3.1 kfunc deprecation
+---------------------
+
+As described above, while sometimes a maintainer may find that a kfunc must be
+changed or removed immediately to accommodate some changes in their subsystem,
+usually kfuncs will be able to accommodate a longer and more measured
+deprecation process. For example, if a new kfunc comes along which provides
+superior functionality to an existing kfunc, the existing kfunc may be
+deprecated for some period of time to allow users to migrate their BPF programs
+to use the new one. Or, if a kfunc has no known users, a decision may be made
+to remove the kfunc (without providing an alternative API) after some
+deprecation period so as to provide users with a window to notify the kfunc
+maintainer if it turns out that the kfunc is actually being used.
+
+It's expected that the common case will be that kfuncs will go through a
+deprecation period rather than being changed or removed without warning. As
+described in :ref:`KF_deprecated_flag`, the kfunc framework provides the
+KF_DEPRECATED flag to kfunc developers to signal to users that a kfunc has been
+deprecated. Once a kfunc has been marked with KF_DEPRECATED, the following
+procedure is followed for removal:
+
+1. Any relevant information for deprecated kfuncs is documented in the kfunc's
+ kernel docs. This documentation will typically include the kfunc's expected
+ remaining lifespan, a recommendation for new functionality that can replace
+ the usage of the deprecated function (or an explanation as to why no such
+ replacement exists), etc.
+
+2. The deprecated kfunc is kept in the kernel for some period of time after it
+ was first marked as deprecated. This time period will be chosen on a
+ case-by-case basis, and will typically depend on how widespread the use of
+ the kfunc is, how long it has been in the kernel, and how hard it is to move
+ to alternatives. This deprecation time period is "best effort", and as
+ described :ref:`above<BPF_kfunc_lifecycle_expectations>`, circumstances may
+ sometimes dictate that the kfunc be removed before the full intended
+ deprecation period has elapsed.
+
+3. After the deprecation period the kfunc will be removed. At this point, BPF
+ programs calling the kfunc will be rejected by the verifier.
+
+4. Core kfuncs
==============
The BPF subsystem provides a number of "core" kfuncs that are potentially
applicable to a wide variety of different possible use cases and programs.
Those kfuncs are documented here.
-3.1 struct task_struct * kfuncs
+4.1 struct task_struct * kfuncs
-------------------------------
There are a number of kfuncs that allow ``struct task_struct *`` objects to be
@@ -306,7 +502,7 @@
return 0;
}
-3.2 struct cgroup * kfuncs
+4.2 struct cgroup * kfuncs
--------------------------
``struct cgroup *`` objects also have acquire and release functions:
@@ -420,3 +616,10 @@
bpf_cgroup_release(parent);
return 0;
}
+
+4.3 struct cpumask * kfuncs
+---------------------------
+
+BPF provides a set of kfuncs that can be used to query, allocate, mutate, and
+destroy struct cpumask * objects. Please refer to :ref:`cpumasks-header-label`
+for more details.
diff --git a/Documentation/bpf/libbpf/libbpf_naming_convention.rst b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
index c5ac97f..b5b41b6 100644
--- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst
+++ b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
@@ -83,8 +83,8 @@
to be a part of ABI what, in turn, improves both libbpf developer- and
user-experiences.
-ABI versionning
----------------
+ABI versioning
+--------------
To make future ABI extensions possible libbpf ABI is versioned.
Versioning is implemented by ``libbpf.map`` version script that is
@@ -148,7 +148,7 @@
The libbpf API is documented via comments above definitions in
header files. These comments can be rendered by doxygen and sphinx
for well organized html output. This section describes the
-convention in which these comments should be formated.
+convention in which these comments should be formatted.
Here is an example from btf.h:
diff --git a/Documentation/bpf/map_sockmap.rst b/Documentation/bpf/map_sockmap.rst
new file mode 100644
index 0000000..cc92047
--- /dev/null
+++ b/Documentation/bpf/map_sockmap.rst
@@ -0,0 +1,498 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright Red Hat
+
+==============================================
+BPF_MAP_TYPE_SOCKMAP and BPF_MAP_TYPE_SOCKHASH
+==============================================
+
+.. note::
+ - ``BPF_MAP_TYPE_SOCKMAP`` was introduced in kernel version 4.14
+ - ``BPF_MAP_TYPE_SOCKHASH`` was introduced in kernel version 4.18
+
+``BPF_MAP_TYPE_SOCKMAP`` and ``BPF_MAP_TYPE_SOCKHASH`` maps can be used to
+redirect skbs between sockets or to apply policy at the socket level based on
+the result of a BPF (verdict) program with the help of the BPF helpers
+``bpf_sk_redirect_map()``, ``bpf_sk_redirect_hash()``,
+``bpf_msg_redirect_map()`` and ``bpf_msg_redirect_hash()``.
+
+``BPF_MAP_TYPE_SOCKMAP`` is backed by an array that uses an integer key as the
+index to look up a reference to a ``struct sock``. The map values are socket
+descriptors. Similarly, ``BPF_MAP_TYPE_SOCKHASH`` is a hash backed BPF map that
+holds references to sockets via their socket descriptors.
+
+.. note::
+ The value type is either __u32 or __u64; the latter (__u64) is to support
+ returning socket cookies to userspace. Returning the ``struct sock *`` that
+ the map holds to user-space is neither safe nor useful.
+
+These maps may have BPF programs attached to them, specifically a parser program
+and a verdict program. The parser program determines how much data has been
+parsed and therefore how much data needs to be queued to come to a verdict. The
+verdict program is essentially the redirect program and can return a verdict
+of ``__SK_DROP``, ``__SK_PASS``, or ``__SK_REDIRECT``.
+
+When a socket is inserted into one of these maps, its socket callbacks are
+replaced and a ``struct sk_psock`` is attached to it. Additionally, this
+``sk_psock`` inherits the programs that are attached to the map.
+
+A sock object may be in multiple maps, but can only inherit a single
+parse or verdict program. If adding a sock object to a map would result
+in having multiple parser programs the update will return an EBUSY error.
+
+The supported programs to attach to these maps are:
+
+.. code-block:: c
+
+ struct sk_psock_progs {
+ struct bpf_prog *msg_parser;
+ struct bpf_prog *stream_parser;
+ struct bpf_prog *stream_verdict;
+ struct bpf_prog *skb_verdict;
+ };
+
+.. note::
+ Users are not allowed to attach ``stream_verdict`` and ``skb_verdict``
+ programs to the same map.
+
+The attach types for the map programs are:
+
+- ``msg_parser`` program - ``BPF_SK_MSG_VERDICT``.
+- ``stream_parser`` program - ``BPF_SK_SKB_STREAM_PARSER``.
+- ``stream_verdict`` program - ``BPF_SK_SKB_STREAM_VERDICT``.
+- ``skb_verdict`` program - ``BPF_SK_SKB_VERDICT``.
+
+There are additional helpers available to use with the parser and verdict
+programs: ``bpf_msg_apply_bytes()`` and ``bpf_msg_cork_bytes()``. With
+``bpf_msg_apply_bytes()`` BPF programs can tell the infrastructure how many
+bytes the given verdict should apply to. The helper ``bpf_msg_cork_bytes()``
+handles a different case where a BPF program cannot reach a verdict on a msg
+until it receives more bytes AND the program doesn't want to forward the packet
+until it is known to be good.
+
+Finally, the helpers ``bpf_msg_pull_data()`` and ``bpf_msg_push_data()`` are
+available to ``BPF_PROG_TYPE_SK_MSG`` BPF programs to pull in data and set the
+start and end pointers to given values or to add metadata to the ``struct
+sk_msg_buff *msg``.
+
+All these helpers will be described in more detail below.
+
+Usage
+=====
+Kernel BPF
+----------
+bpf_msg_redirect_map()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags)
+
+This helper is used in programs implementing policies at the socket level. If
+the message ``msg`` is allowed to pass (i.e., if the verdict BPF program
+returns ``SK_PASS``), redirect it to the socket referenced by ``map`` (of type
+``BPF_MAP_TYPE_SOCKMAP``) at index ``key``. Both ingress and egress interfaces
+can be used for redirection. The ``BPF_F_INGRESS`` value in ``flags`` is used
+to select the ingress path otherwise the egress path is selected. This is the
+only flag supported for now.
+
+Returns ``SK_PASS`` on success, or ``SK_DROP`` on error.
+
+bpf_sk_redirect_map()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key u64 flags)
+
+Redirect the packet to the socket referenced by ``map`` (of type
+``BPF_MAP_TYPE_SOCKMAP``) at index ``key``. Both ingress and egress interfaces
+can be used for redirection. The ``BPF_F_INGRESS`` value in ``flags`` is used
+to select the ingress path otherwise the egress path is selected. This is the
+only flag supported for now.
+
+Returns ``SK_PASS`` on success, or ``SK_DROP`` on error.
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+socket entries of type ``struct sock *`` can be retrieved using the
+``bpf_map_lookup_elem()`` helper.
+
+bpf_sock_map_update()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
+
+Add an entry to, or update a ``map`` referencing sockets. The ``skops`` is used
+as a new value for the entry associated to ``key``. The ``flags`` argument can
+be one of the following:
+
+- ``BPF_ANY``: Create a new element or update an existing element.
+- ``BPF_NOEXIST``: Create a new element only if it did not exist.
+- ``BPF_EXIST``: Update an existing element.
+
+If the ``map`` has BPF programs (parser and verdict), those will be inherited
+by the socket being added. If the socket is already attached to BPF programs,
+this results in an error.
+
+Returns 0 on success, or a negative error in case of failure.
+
+bpf_sock_hash_update()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
+
+Add an entry to, or update a sockhash ``map`` referencing sockets. The ``skops``
+is used as a new value for the entry associated to ``key``.
+
+The ``flags`` argument can be one of the following:
+
+- ``BPF_ANY``: Create a new element or update an existing element.
+- ``BPF_NOEXIST``: Create a new element only if it did not exist.
+- ``BPF_EXIST``: Update an existing element.
+
+If the ``map`` has BPF programs (parser and verdict), those will be inherited
+by the socket being added. If the socket is already attached to BPF programs,
+this results in an error.
+
+Returns 0 on success, or a negative error in case of failure.
+
+bpf_msg_redirect_hash()
+^^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags)
+
+This helper is used in programs implementing policies at the socket level. If
+the message ``msg`` is allowed to pass (i.e., if the verdict BPF program returns
+``SK_PASS``), redirect it to the socket referenced by ``map`` (of type
+``BPF_MAP_TYPE_SOCKHASH``) using hash ``key``. Both ingress and egress
+interfaces can be used for redirection. The ``BPF_F_INGRESS`` value in
+``flags`` is used to select the ingress path otherwise the egress path is
+selected. This is the only flag supported for now.
+
+Returns ``SK_PASS`` on success, or ``SK_DROP`` on error.
+
+bpf_sk_redirect_hash()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags)
+
+This helper is used in programs implementing policies at the skb socket level.
+If the sk_buff ``skb`` is allowed to pass (i.e., if the verdict BPF program
+returns ``SK_PASS``), redirect it to the socket referenced by ``map`` (of type
+``BPF_MAP_TYPE_SOCKHASH``) using hash ``key``. Both ingress and egress
+interfaces can be used for redirection. The ``BPF_F_INGRESS`` value in
+``flags`` is used to select the ingress path otherwise the egress path is
+selected. This is the only flag supported for now.
+
+Returns ``SK_PASS`` on success, or ``SK_DROP`` on error.
+
+bpf_msg_apply_bytes()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes)
+
+For socket policies, apply the verdict of the BPF program to the next (number
+of ``bytes``) of message ``msg``. For example, this helper can be used in the
+following cases:
+
+- A single ``sendmsg()`` or ``sendfile()`` system call contains multiple
+ logical messages that the BPF program is supposed to read and for which it
+ should apply a verdict.
+- A BPF program only cares to read the first ``bytes`` of a ``msg``. If the
+ message has a large payload, then setting up and calling the BPF program
+ repeatedly for all bytes, even though the verdict is already known, would
+ create unnecessary overhead.
+
+Returns 0
+
+bpf_msg_cork_bytes()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes)
+
+For socket policies, prevent the execution of the verdict BPF program for
+message ``msg`` until the number of ``bytes`` have been accumulated.
+
+This can be used when one needs a specific number of bytes before a verdict can
+be assigned, even if the data spans multiple ``sendmsg()`` or ``sendfile()``
+calls.
+
+Returns 0
+
+bpf_msg_pull_data()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags)
+
+For socket policies, pull in non-linear data from user space for ``msg`` and set
+pointers ``msg->data`` and ``msg->data_end`` to ``start`` and ``end`` bytes
+offsets into ``msg``, respectively.
+
+If a program of type ``BPF_PROG_TYPE_SK_MSG`` is run on a ``msg`` it can only
+parse data that the (``data``, ``data_end``) pointers have already consumed.
+For ``sendmsg()`` hooks this is likely the first scatterlist element. But for
+calls relying on the ``sendpage`` handler (e.g., ``sendfile()``) this will be
+the range (**0**, **0**) because the data is shared with user space and by
+default the objective is to avoid allowing user space to modify data while (or
+after) BPF verdict is being decided. This helper can be used to pull in data
+and to set the start and end pointers to given values. Data will be copied if
+necessary (i.e., if data was not linear and if start and end pointers do not
+point to the same chunk).
+
+A call to this helper is susceptible to change the underlying packet buffer.
+Therefore, at load time, all checks on pointers previously done by the verifier
+are invalidated and must be performed again, if the helper is used in
+combination with direct packet access.
+
+All values for ``flags`` are reserved for future usage, and must be left at
+zero.
+
+Returns 0 on success, or a negative error in case of failure.
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c
+
+ void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+Look up a socket entry in the sockmap or sockhash map.
+
+Returns the socket entry associated to ``key``, or NULL if no entry was found.
+
+bpf_map_update_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
+
+Add or update a socket entry in a sockmap or sockhash.
+
+The flags argument can be one of the following:
+
+- BPF_ANY: Create a new element or update an existing element.
+- BPF_NOEXIST: Create a new element only if it did not exist.
+- BPF_EXIST: Update an existing element.
+
+Returns 0 on success, or a negative error in case of failure.
+
+bpf_map_delete_elem()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ long bpf_map_delete_elem(struct bpf_map *map, const void *key)
+
+Delete a socket entry from a sockmap or a sockhash.
+
+Returns 0 on success, or a negative error in case of failure.
+
+User space
+----------
+bpf_map_update_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ int bpf_map_update_elem(int fd, const void *key, const void *value, __u64 flags)
+
+Sockmap entries can be added or updated using the ``bpf_map_update_elem()``
+function. The ``key`` parameter is the index value of the sockmap array. And the
+``value`` parameter is the FD value of that socket.
+
+Under the hood, the sockmap update function uses the socket FD value to
+retrieve the associated socket and its attached psock.
+
+The flags argument can be one of the following:
+
+- BPF_ANY: Create a new element or update an existing element.
+- BPF_NOEXIST: Create a new element only if it did not exist.
+- BPF_EXIST: Update an existing element.
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ int bpf_map_lookup_elem(int fd, const void *key, void *value)
+
+Sockmap entries can be retrieved using the ``bpf_map_lookup_elem()`` function.
+
+.. note::
+ The entry returned is a socket cookie rather than a socket itself.
+
+bpf_map_delete_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+ int bpf_map_delete_elem(int fd, const void *key)
+
+Sockmap entries can be deleted using the ``bpf_map_delete_elem()``
+function.
+
+Returns 0 on success, or negative error in case of failure.
+
+Examples
+========
+
+Kernel BPF
+----------
+Several examples of the use of sockmap APIs can be found in:
+
+- `tools/testing/selftests/bpf/progs/test_sockmap_kern.h`_
+- `tools/testing/selftests/bpf/progs/sockmap_parse_prog.c`_
+- `tools/testing/selftests/bpf/progs/sockmap_verdict_prog.c`_
+- `tools/testing/selftests/bpf/progs/test_sockmap_listen.c`_
+- `tools/testing/selftests/bpf/progs/test_sockmap_update.c`_
+
+The following code snippet shows how to declare a sockmap.
+
+.. code-block:: c
+
+ struct {
+ __uint(type, BPF_MAP_TYPE_SOCKMAP);
+ __uint(max_entries, 1);
+ __type(key, __u32);
+ __type(value, __u64);
+ } sock_map_rx SEC(".maps");
+
+The following code snippet shows a sample parser program.
+
+.. code-block:: c
+
+ SEC("sk_skb/stream_parser")
+ int bpf_prog_parser(struct __sk_buff *skb)
+ {
+ return skb->len;
+ }
+
+The following code snippet shows a simple verdict program that interacts with a
+sockmap to redirect traffic to another socket based on the local port.
+
+.. code-block:: c
+
+ SEC("sk_skb/stream_verdict")
+ int bpf_prog_verdict(struct __sk_buff *skb)
+ {
+ __u32 lport = skb->local_port;
+ __u32 idx = 0;
+
+ if (lport == 10000)
+ return bpf_sk_redirect_map(skb, &sock_map_rx, idx, 0);
+
+ return SK_PASS;
+ }
+
+The following code snippet shows how to declare a sockhash map.
+
+.. code-block:: c
+
+ struct socket_key {
+ __u32 src_ip;
+ __u32 dst_ip;
+ __u32 src_port;
+ __u32 dst_port;
+ };
+
+ struct {
+ __uint(type, BPF_MAP_TYPE_SOCKHASH);
+ __uint(max_entries, 1);
+ __type(key, struct socket_key);
+ __type(value, __u64);
+ } sock_hash_rx SEC(".maps");
+
+The following code snippet shows a simple verdict program that interacts with a
+sockhash to redirect traffic to another socket based on a hash of some of the
+skb parameters.
+
+.. code-block:: c
+
+ static inline
+ void extract_socket_key(struct __sk_buff *skb, struct socket_key *key)
+ {
+ key->src_ip = skb->remote_ip4;
+ key->dst_ip = skb->local_ip4;
+ key->src_port = skb->remote_port >> 16;
+ key->dst_port = (bpf_htonl(skb->local_port)) >> 16;
+ }
+
+ SEC("sk_skb/stream_verdict")
+ int bpf_prog_verdict(struct __sk_buff *skb)
+ {
+ struct socket_key key;
+
+ extract_socket_key(skb, &key);
+
+ return bpf_sk_redirect_hash(skb, &sock_hash_rx, &key, 0);
+ }
+
+User space
+----------
+Several examples of the use of sockmap APIs can be found in:
+
+- `tools/testing/selftests/bpf/prog_tests/sockmap_basic.c`_
+- `tools/testing/selftests/bpf/test_sockmap.c`_
+- `tools/testing/selftests/bpf/test_maps.c`_
+
+The following code sample shows how to create a sockmap, attach a parser and
+verdict program, as well as add a socket entry.
+
+.. code-block:: c
+
+ int create_sample_sockmap(int sock, int parse_prog_fd, int verdict_prog_fd)
+ {
+ int index = 0;
+ int map, err;
+
+ map = bpf_map_create(BPF_MAP_TYPE_SOCKMAP, NULL, sizeof(int), sizeof(int), 1, NULL);
+ if (map < 0) {
+ fprintf(stderr, "Failed to create sockmap: %s\n", strerror(errno));
+ return -1;
+ }
+
+ err = bpf_prog_attach(parse_prog_fd, map, BPF_SK_SKB_STREAM_PARSER, 0);
+ if (err){
+ fprintf(stderr, "Failed to attach_parser_prog_to_map: %s\n", strerror(errno));
+ goto out;
+ }
+
+ err = bpf_prog_attach(verdict_prog_fd, map, BPF_SK_SKB_STREAM_VERDICT, 0);
+ if (err){
+ fprintf(stderr, "Failed to attach_verdict_prog_to_map: %s\n", strerror(errno));
+ goto out;
+ }
+
+ err = bpf_map_update_elem(map, &index, &sock, BPF_NOEXIST);
+ if (err) {
+ fprintf(stderr, "Failed to update sockmap: %s\n", strerror(errno));
+ goto out;
+ }
+
+ out:
+ close(map);
+ return err;
+ }
+
+References
+===========
+
+- https://github.com/jrfastab/linux-kernel-xdp/commit/c89fd73cb9d2d7f3c716c3e00836f07b1aeb261f
+- https://lwn.net/Articles/731133/
+- http://vger.kernel.org/lpc_net2018_talks/ktls_bpf_paper.pdf
+- https://lwn.net/Articles/748628/
+- https://lore.kernel.org/bpf/20200218171023.844439-7-jakub@cloudflare.com/
+
+.. _`tools/testing/selftests/bpf/progs/test_sockmap_kern.h`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/test_sockmap_kern.h
+.. _`tools/testing/selftests/bpf/progs/sockmap_parse_prog.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/sockmap_parse_prog.c
+.. _`tools/testing/selftests/bpf/progs/sockmap_verdict_prog.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/sockmap_verdict_prog.c
+.. _`tools/testing/selftests/bpf/prog_tests/sockmap_basic.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
+.. _`tools/testing/selftests/bpf/test_sockmap.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/test_sockmap.c
+.. _`tools/testing/selftests/bpf/test_maps.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/test_maps.c
+.. _`tools/testing/selftests/bpf/progs/test_sockmap_listen.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/test_sockmap_listen.c
+.. _`tools/testing/selftests/bpf/progs/test_sockmap_update.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/test_sockmap_update.c
diff --git a/Documentation/bpf/map_xskmap.rst b/Documentation/bpf/map_xskmap.rst
index 7093b82..dc143ed 100644
--- a/Documentation/bpf/map_xskmap.rst
+++ b/Documentation/bpf/map_xskmap.rst
@@ -178,7 +178,7 @@
For an example on how create AF_XDP sockets, please see the AF_XDP-example and
AF_XDP-forwarding programs in the `bpf-examples`_ directory in the `libxdp`_ repository.
-For a detailed explaination of the AF_XDP interface please see:
+For a detailed explanation of the AF_XDP interface please see:
- `libxdp-readme`_.
- `AF_XDP`_ kernel documentation.
diff --git a/Documentation/bpf/other.rst b/Documentation/bpf/other.rst
index 3d61963..7e6b120 100644
--- a/Documentation/bpf/other.rst
+++ b/Documentation/bpf/other.rst
@@ -6,4 +6,5 @@
:maxdepth: 1
ringbuf
- llvm_reloc
\ No newline at end of file
+ llvm_reloc
+ graph_ds_impl
diff --git a/Documentation/bpf/ringbuf.rst b/Documentation/bpf/ringbuf.rst
index 6a615cd..a99cd05 100644
--- a/Documentation/bpf/ringbuf.rst
+++ b/Documentation/bpf/ringbuf.rst
@@ -124,7 +124,7 @@
- ``BPF_RB_AVAIL_DATA`` returns amount of unconsumed data in ring buffer;
- ``BPF_RB_RING_SIZE`` returns the size of ring buffer;
-- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical possition
+- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical position
of consumer/producer, respectively.
Returned values are momentarily snapshots of ring buffer state and could be
@@ -146,7 +146,7 @@
This reserve/commit schema allows a natural way for multiple producers, either
on different CPUs or even on the same CPU/in the same BPF program, to reserve
independent records and work with them without blocking other producers. This
-means that if BPF program was interruped by another BPF program sharing the
+means that if BPF program was interrupted by another BPF program sharing the
same ring buffer, they will both get a record reserved (provided there is
enough space left) and can work with it and submit it independently. This
applies to NMI context as well, except that due to using a spinlock during
diff --git a/Documentation/bpf/verifier.rst b/Documentation/bpf/verifier.rst
index d4326ca..f0ec19d 100644
--- a/Documentation/bpf/verifier.rst
+++ b/Documentation/bpf/verifier.rst
@@ -192,7 +192,7 @@
As well as range-checking, the tracked information is also used for enforcing
alignment of pointer accesses. For instance, on most systems the packet pointer
is 2 bytes after a 4-byte alignment. If a program adds 14 bytes to that to jump
-over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting
+over the Ethernet header, then reads IHL and adds (IHL * 4), the resulting
pointer will have a variable offset known to be 4n+2 for some n, so adding the 2
bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through
that pointer are safe.
@@ -316,6 +316,301 @@
registers it may hold). They must all be safe for the branch to be pruned.
This is implemented in states_equal().
+Some technical details about state pruning implementation could be found below.
+
+Register liveness tracking
+--------------------------
+
+In order to make state pruning effective, liveness state is tracked for each
+register and stack slot. The basic idea is to track which registers and stack
+slots are actually used during subseqeuent execution of the program, until
+program exit is reached. Registers and stack slots that were never used could be
+removed from the cached state thus making more states equivalent to a cached
+state. This could be illustrated by the following program::
+
+ 0: call bpf_get_prandom_u32()
+ 1: r1 = 0
+ 2: if r0 == 0 goto +1
+ 3: r0 = 1
+ --- checkpoint ---
+ 4: r0 = r1
+ 5: exit
+
+Suppose that a state cache entry is created at instruction #4 (such entries are
+also called "checkpoints" in the text below). The verifier could reach the
+instruction with one of two possible register states:
+
+* r0 = 1, r1 = 0
+* r0 = 0, r1 = 0
+
+However, only the value of register ``r1`` is important to successfully finish
+verification. The goal of the liveness tracking algorithm is to spot this fact
+and figure out that both states are actually equivalent.
+
+Data structures
+~~~~~~~~~~~~~~~
+
+Liveness is tracked using the following data structures::
+
+ enum bpf_reg_liveness {
+ REG_LIVE_NONE = 0,
+ REG_LIVE_READ32 = 0x1,
+ REG_LIVE_READ64 = 0x2,
+ REG_LIVE_READ = REG_LIVE_READ32 | REG_LIVE_READ64,
+ REG_LIVE_WRITTEN = 0x4,
+ REG_LIVE_DONE = 0x8,
+ };
+
+ struct bpf_reg_state {
+ ...
+ struct bpf_reg_state *parent;
+ ...
+ enum bpf_reg_liveness live;
+ ...
+ };
+
+ struct bpf_stack_state {
+ struct bpf_reg_state spilled_ptr;
+ ...
+ };
+
+ struct bpf_func_state {
+ struct bpf_reg_state regs[MAX_BPF_REG];
+ ...
+ struct bpf_stack_state *stack;
+ }
+
+ struct bpf_verifier_state {
+ struct bpf_func_state *frame[MAX_CALL_FRAMES];
+ struct bpf_verifier_state *parent;
+ ...
+ }
+
+* ``REG_LIVE_NONE`` is an initial value assigned to ``->live`` fields upon new
+ verifier state creation;
+
+* ``REG_LIVE_WRITTEN`` means that the value of the register (or stack slot) is
+ defined by some instruction verified between this verifier state's parent and
+ verifier state itself;
+
+* ``REG_LIVE_READ{32,64}`` means that the value of the register (or stack slot)
+ is read by a some child state of this verifier state;
+
+* ``REG_LIVE_DONE`` is a marker used by ``clean_verifier_state()`` to avoid
+ processing same verifier state multiple times and for some sanity checks;
+
+* ``->live`` field values are formed by combining ``enum bpf_reg_liveness``
+ values using bitwise or.
+
+Register parentage chains
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In order to propagate information between parent and child states, a *register
+parentage chain* is established. Each register or stack slot is linked to a
+corresponding register or stack slot in its parent state via a ``->parent``
+pointer. This link is established upon state creation in ``is_state_visited()``
+and might be modified by ``set_callee_state()`` called from
+``__check_func_call()``.
+
+The rules for correspondence between registers / stack slots are as follows:
+
+* For the current stack frame, registers and stack slots of the new state are
+ linked to the registers and stack slots of the parent state with the same
+ indices.
+
+* For the outer stack frames, only caller saved registers (r6-r9) and stack
+ slots are linked to the registers and stack slots of the parent state with the
+ same indices.
+
+* When function call is processed a new ``struct bpf_func_state`` instance is
+ allocated, it encapsulates a new set of registers and stack slots. For this
+ new frame, parent links for r6-r9 and stack slots are set to nil, parent links
+ for r1-r5 are set to match caller r1-r5 parent links.
+
+This could be illustrated by the following diagram (arrows stand for
+``->parent`` pointers)::
+
+ ... ; Frame #0, some instructions
+ --- checkpoint #0 ---
+ 1 : r6 = 42 ; Frame #0
+ --- checkpoint #1 ---
+ 2 : call foo() ; Frame #0
+ ... ; Frame #1, instructions from foo()
+ --- checkpoint #2 ---
+ ... ; Frame #1, instructions from foo()
+ --- checkpoint #3 ---
+ exit ; Frame #1, return from foo()
+ 3 : r1 = r6 ; Frame #0 <- current state
+
+ +-------------------------------+-------------------------------+
+ | Frame #0 | Frame #1 |
+ Checkpoint +-------------------------------+-------------------------------+
+ #0 | r0 | r1-r5 | r6-r9 | fp-8 ... |
+ +-------------------------------+
+ ^ ^ ^ ^
+ | | | |
+ Checkpoint +-------------------------------+
+ #1 | r0 | r1-r5 | r6-r9 | fp-8 ... |
+ +-------------------------------+
+ ^ ^ ^
+ |_______|_______|_______________
+ | | |
+ nil nil | | | nil nil
+ | | | | | | |
+ Checkpoint +-------------------------------+-------------------------------+
+ #2 | r0 | r1-r5 | r6-r9 | fp-8 ... | r0 | r1-r5 | r6-r9 | fp-8 ... |
+ +-------------------------------+-------------------------------+
+ ^ ^ ^ ^ ^
+ nil nil | | | | |
+ | | | | | | |
+ Checkpoint +-------------------------------+-------------------------------+
+ #3 | r0 | r1-r5 | r6-r9 | fp-8 ... | r0 | r1-r5 | r6-r9 | fp-8 ... |
+ +-------------------------------+-------------------------------+
+ ^ ^
+ nil nil | |
+ | | | |
+ Current +-------------------------------+
+ state | r0 | r1-r5 | r6-r9 | fp-8 ... |
+ +-------------------------------+
+ \
+ r6 read mark is propagated via these links
+ all the way up to checkpoint #1.
+ The checkpoint #1 contains a write mark for r6
+ because of instruction (1), thus read propagation
+ does not reach checkpoint #0 (see section below).
+
+Liveness marks tracking
+~~~~~~~~~~~~~~~~~~~~~~~
+
+For each processed instruction, the verifier tracks read and written registers
+and stack slots. The main idea of the algorithm is that read marks propagate
+back along the state parentage chain until they hit a write mark, which 'screens
+off' earlier states from the read. The information about reads is propagated by
+function ``mark_reg_read()`` which could be summarized as follows::
+
+ mark_reg_read(struct bpf_reg_state *state, ...):
+ parent = state->parent
+ while parent:
+ if state->live & REG_LIVE_WRITTEN:
+ break
+ if parent->live & REG_LIVE_READ64:
+ break
+ parent->live |= REG_LIVE_READ64
+ state = parent
+ parent = state->parent
+
+Notes:
+
+* The read marks are applied to the **parent** state while write marks are
+ applied to the **current** state. The write mark on a register or stack slot
+ means that it is updated by some instruction in the straight-line code leading
+ from the parent state to the current state.
+
+* Details about REG_LIVE_READ32 are omitted.
+
+* Function ``propagate_liveness()`` (see section :ref:`read_marks_for_cache_hits`)
+ might override the first parent link. Please refer to the comments in the
+ ``propagate_liveness()`` and ``mark_reg_read()`` source code for further
+ details.
+
+Because stack writes could have different sizes ``REG_LIVE_WRITTEN`` marks are
+applied conservatively: stack slots are marked as written only if write size
+corresponds to the size of the register, e.g. see function ``save_register_state()``.
+
+Consider the following example::
+
+ 0: (*u64)(r10 - 8) = 0 ; define 8 bytes of fp-8
+ --- checkpoint #0 ---
+ 1: (*u32)(r10 - 8) = 1 ; redefine lower 4 bytes
+ 2: r1 = (*u32)(r10 - 8) ; read lower 4 bytes defined at (1)
+ 3: r2 = (*u32)(r10 - 4) ; read upper 4 bytes defined at (0)
+
+As stated above, the write at (1) does not count as ``REG_LIVE_WRITTEN``. Should
+it be otherwise, the algorithm above wouldn't be able to propagate the read mark
+from (3) to checkpoint #0.
+
+Once the ``BPF_EXIT`` instruction is reached ``update_branch_counts()`` is
+called to update the ``->branches`` counter for each verifier state in a chain
+of parent verifier states. When the ``->branches`` counter reaches zero the
+verifier state becomes a valid entry in a set of cached verifier states.
+
+Each entry of the verifier states cache is post-processed by a function
+``clean_live_states()``. This function marks all registers and stack slots
+without ``REG_LIVE_READ{32,64}`` marks as ``NOT_INIT`` or ``STACK_INVALID``.
+Registers/stack slots marked in this way are ignored in function ``stacksafe()``
+called from ``states_equal()`` when a state cache entry is considered for
+equivalence with a current state.
+
+Now it is possible to explain how the example from the beginning of the section
+works::
+
+ 0: call bpf_get_prandom_u32()
+ 1: r1 = 0
+ 2: if r0 == 0 goto +1
+ 3: r0 = 1
+ --- checkpoint[0] ---
+ 4: r0 = r1
+ 5: exit
+
+* At instruction #2 branching point is reached and state ``{ r0 == 0, r1 == 0, pc == 4 }``
+ is pushed to states processing queue (pc stands for program counter).
+
+* At instruction #4:
+
+ * ``checkpoint[0]`` states cache entry is created: ``{ r0 == 1, r1 == 0, pc == 4 }``;
+ * ``checkpoint[0].r0`` is marked as written;
+ * ``checkpoint[0].r1`` is marked as read;
+
+* At instruction #5 exit is reached and ``checkpoint[0]`` can now be processed
+ by ``clean_live_states()``. After this processing ``checkpoint[0].r0`` has a
+ read mark and all other registers and stack slots are marked as ``NOT_INIT``
+ or ``STACK_INVALID``
+
+* The state ``{ r0 == 0, r1 == 0, pc == 4 }`` is popped from the states queue
+ and is compared against a cached state ``{ r1 == 0, pc == 4 }``, the states
+ are considered equivalent.
+
+.. _read_marks_for_cache_hits:
+
+Read marks propagation for cache hits
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Another point is the handling of read marks when a previously verified state is
+found in the states cache. Upon cache hit verifier must behave in the same way
+as if the current state was verified to the program exit. This means that all
+read marks, present on registers and stack slots of the cached state, must be
+propagated over the parentage chain of the current state. Example below shows
+why this is important. Function ``propagate_liveness()`` handles this case.
+
+Consider the following state parentage chain (S is a starting state, A-E are
+derived states, -> arrows show which state is derived from which)::
+
+ r1 read
+ <------------- A[r1] == 0
+ C[r1] == 0
+ S ---> A ---> B ---> exit E[r1] == 1
+ |
+ ` ---> C ---> D
+ |
+ ` ---> E ^
+ |___ suppose all these
+ ^ states are at insn #Y
+ |
+ suppose all these
+ states are at insn #X
+
+* Chain of states ``S -> A -> B -> exit`` is verified first.
+
+* While ``B -> exit`` is verified, register ``r1`` is read and this read mark is
+ propagated up to state ``A``.
+
+* When chain of states ``C -> D`` is verified the state ``D`` turns out to be
+ equivalent to state ``B``.
+
+* The read mark for ``r1`` has to be propagated to state ``C``, otherwise state
+ ``C`` might get mistakenly marked as equivalent to state ``E`` even though
+ values for register ``r1`` differ between ``C`` and ``E``.
+
Understanding eBPF verifier messages
====================================
diff --git a/Documentation/conf.py b/Documentation/conf.py
index d927737..db16814 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -116,6 +116,9 @@
# include/linux/linkage.h:
"asmlinkage",
+
+ # include/linux/btf.h
+ "__bpf_kfunc",
]
else:
@@ -153,7 +156,7 @@
math_renderer = 'mathjax'
# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
+templates_path = ['sphinx/templates']
# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
@@ -328,6 +331,7 @@
'description': get_cline_version(),
'page_width': '65em',
'sidebar_width': '15em',
+ 'fixed_sidebar': 'true',
'font_size': 'inherit',
'font_family': 'serif',
}
@@ -345,7 +349,7 @@
# Custom sidebar templates, maps document names to template names.
# Note that the RTD theme ignores this
-html_sidebars = { '**': ['searchbox.html', 'localtoc.html', 'sourcelink.html']}
+html_sidebars = { '**': ['searchbox.html', 'kernel-toc.html', 'sourcelink.html']}
# about.html is available for alabaster theme. Add it at the front.
if html_theme == 'alabaster':
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index 77eb775..7a3a08d 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -127,6 +127,7 @@
:maxdepth: 1
librs
+ netlink
.. only:: subproject and html
diff --git a/Documentation/core-api/netlink.rst b/Documentation/core-api/netlink.rst
new file mode 100644
index 0000000..e4a938a
--- /dev/null
+++ b/Documentation/core-api/netlink.rst
@@ -0,0 +1,101 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+
+.. _kernel_netlink:
+
+===================================
+Netlink notes for kernel developers
+===================================
+
+General guidance
+================
+
+Attribute enums
+---------------
+
+Older families often define "null" attributes and commands with value
+of ``0`` and named ``unspec``. This is supported (``type: unused``)
+but should be avoided in new families. The ``unspec`` enum values are
+not used in practice, so just set the value of the first attribute to ``1``.
+
+Message enums
+-------------
+
+Use the same command IDs for requests and replies. This makes it easier
+to match them up, and we have plenty of ID space.
+
+Use separate command IDs for notifications. This makes it easier to
+sort the notifications from replies (and present them to the user
+application via a different API than replies).
+
+Answer requests
+---------------
+
+Older families do not reply to all of the commands, especially NEW / ADD
+commands. User only gets information whether the operation succeeded or
+not via the ACK. Try to find useful data to return. Once the command is
+added whether it replies with a full message or only an ACK is uAPI and
+cannot be changed. It's better to err on the side of replying.
+
+Specifically NEW and ADD commands should reply with information identifying
+the created object such as the allocated object's ID (without having to
+resort to using ``NLM_F_ECHO``).
+
+NLM_F_ECHO
+----------
+
+Make sure to pass the request info to genl_notify() to allow ``NLM_F_ECHO``
+to take effect. This is useful for programs that need precise feedback
+from the kernel (for example for logging purposes).
+
+Support dump consistency
+------------------------
+
+If iterating over objects during dump may skip over objects or repeat
+them - make sure to report dump inconsistency with ``NLM_F_DUMP_INTR``.
+This is usually implemented by maintaining a generation id for the
+structure and recording it in the ``seq`` member of struct netlink_callback.
+
+Netlink specification
+=====================
+
+Documentation of the Netlink specification parts which are only relevant
+to the kernel space.
+
+Globals
+-------
+
+kernel-policy
+~~~~~~~~~~~~~
+
+Defines if the kernel validation policy is per operation (``per-op``)
+or for the entire family (``global``). New families should use ``per-op``
+(default) to be able to narrow down the attributes accepted by a specific
+command.
+
+checks
+------
+
+Documentation for the ``checks`` sub-sections of attribute specs.
+
+unterminated-ok
+~~~~~~~~~~~~~~~
+
+Accept strings without the null-termination (for legacy families only).
+Switches from the ``NLA_NUL_STRING`` to ``NLA_STRING`` policy type.
+
+max-len
+~~~~~~~
+
+Defines max length for a binary or string attribute (corresponding
+to the ``len`` member of struct nla_policy). For string attributes terminating
+null character is not counted towards ``max-len``.
+
+The field may either be a literal integer value or a name of a defined
+constant. String types may reduce the constant by one
+(i.e. specify ``max-len: CONST - 1``) to reserve space for the terminating
+character so implementations should recognize such pattern.
+
+min-len
+~~~~~~~
+
+Similar to ``max-len`` but defines minimum length.
diff --git a/Documentation/core-api/packing.rst b/Documentation/core-api/packing.rst
index d8c341f..3ed13bc 100644
--- a/Documentation/core-api/packing.rst
+++ b/Documentation/core-api/packing.rst
@@ -161,6 +161,6 @@
The packing() function returns an int-encoded error code, which protects the
programmer against incorrect API use. The errors are not expected to occur
-durring runtime, therefore it is reasonable for xxx_packing() to return void
+during runtime, therefore it is reasonable for xxx_packing() to return void
and simply swallow those errors. Optionally it can dump stack or print the
error description.
diff --git a/Documentation/core-api/padata.rst b/Documentation/core-api/padata.rst
index 3517571..05b73c6 100644
--- a/Documentation/core-api/padata.rst
+++ b/Documentation/core-api/padata.rst
@@ -42,7 +42,7 @@
Modifying cpumasks
------------------
-The CPUs used to run jobs can be changed in two ways, programatically with
+The CPUs used to run jobs can be changed in two ways, programmatically with
padata_set_cpumask() or via sysfs. The former is defined::
int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type,
diff --git a/Documentation/core-api/pin_user_pages.rst b/Documentation/core-api/pin_user_pages.rst
index b18416f..9fb0b10 100644
--- a/Documentation/core-api/pin_user_pages.rst
+++ b/Documentation/core-api/pin_user_pages.rst
@@ -55,18 +55,17 @@
pages* array, and the function then pins pages by incrementing each by a special
value: GUP_PIN_COUNTING_BIAS.
-For compound pages, the GUP_PIN_COUNTING_BIAS scheme is not used. Instead,
-an exact form of pin counting is achieved, by using the 2nd struct page
-in the compound page. A new struct page field, compound_pincount, has
-been added in order to support this.
+For large folios, the GUP_PIN_COUNTING_BIAS scheme is not used. Instead,
+the extra space available in the struct folio is used to store the
+pincount directly.
-This approach for compound pages avoids the counting upper limit problems that
-are discussed below. Those limitations would have been aggravated severely by
-huge pages, because each tail page adds a refcount to the head page. And in
-fact, testing revealed that, without a separate compound_pincount field,
-page overflows were seen in some huge page stress tests.
+This approach for large folios avoids the counting upper limit problems
+that are discussed below. Those limitations would have been aggravated
+severely by huge pages, because each tail page adds a refcount to the
+head page. And in fact, testing revealed that, without a separate pincount
+field, refcount overflows were seen in some huge page stress tests.
-This also means that huge pages and compound pages do not suffer
+This also means that huge pages and large folios do not suffer
from the false positives problem that is mentioned below.::
Function
@@ -221,7 +220,7 @@
============
This file::
- tools/testing/selftests/vm/gup_test.c
+ tools/testing/selftests/mm/gup_test.c
has the following new calls to exercise the new pin*() wrapper functions:
@@ -264,9 +263,9 @@
Other diagnostics
=================
-dump_page() has been enhanced slightly, to handle these new counting
-fields, and to better report on compound pages in general. Specifically,
-for compound pages, the exact (compound_pincount) pincount is reported.
+dump_page() has been enhanced slightly to handle these new counting
+fields, and to better report on large folios in general. Specifically,
+for large folios, the exact pincount is reported.
References
==========
diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst
index 3b22ed1..8ec4d62 100644
--- a/Documentation/core-api/workqueue.rst
+++ b/Documentation/core-api/workqueue.rst
@@ -370,8 +370,8 @@
The first one can be tracked using tracing: ::
- $ echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event
- $ cat /sys/kernel/debug/tracing/trace_pipe > out.txt
+ $ echo workqueue:workqueue_queue_work > /sys/kernel/tracing/set_event
+ $ cat /sys/kernel/tracing/trace_pipe > out.txt
(wait a few secs)
^C
diff --git a/Documentation/cpu-freq/index.rst b/Documentation/cpu-freq/index.rst
index 2fe32da..de25740 100644
--- a/Documentation/cpu-freq/index.rst
+++ b/Documentation/cpu-freq/index.rst
@@ -1,8 +1,8 @@
.. SPDX-License-Identifier: GPL-2.0
-==============================================================================
-Linux CPUFreq - CPU frequency and voltage scaling code in the Linux(TM) kernel
-==============================================================================
+========================================================================
+CPUFreq - CPU frequency and voltage scaling code in the Linux(TM) kernel
+========================================================================
Author: Dominik Brodowski <linux@brodo.de>
diff --git a/Documentation/crypto/index.rst b/Documentation/crypto/index.rst
index 21338fa..da5d5ad 100644
--- a/Documentation/crypto/index.rst
+++ b/Documentation/crypto/index.rst
@@ -1,6 +1,6 @@
-=======================
-Linux Kernel Crypto API
-=======================
+==========
+Crypto API
+==========
:Author: Stephan Mueller
:Author: Marek Vasut
diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst
index d997606..535ce12 100644
--- a/Documentation/dev-tools/coccinelle.rst
+++ b/Documentation/dev-tools/coccinelle.rst
@@ -219,7 +219,7 @@
cat cocci.err
You can use SPFLAGS to add debugging flags; for instance you may want to
-add both --profile --show-trying to SPFLAGS when debugging. For example
+add both ``--profile --show-trying`` to SPFLAGS when debugging. For example
you may want to use::
rm -f err.log
@@ -248,7 +248,7 @@
- Your current user's home directory is processed first
- Your directory from which spatch is called is processed next
-- The directory provided with the --dir option is processed last, if used
+- The directory provided with the ``--dir`` option is processed last, if used
Since coccicheck runs through make, it naturally runs from the kernel
proper dir; as such the second rule above would be implied for picking up a
@@ -265,8 +265,8 @@
fi
KBUILD_EXTMOD is set when an explicit target with M= is used. For both cases
-the spatch --dir argument is used, as such third rule applies when whether M=
-is used or not, and when M= is used the target directory can have its own
+the spatch ``--dir`` argument is used, as such third rule applies when whether
+M= is used or not, and when M= is used the target directory can have its own
.cocciconfig file. When M= is not passed as an argument to coccicheck the
target directory is the same as the directory from where spatch was called.
diff --git a/Documentation/dev-tools/gdb-kernel-debugging.rst b/Documentation/dev-tools/gdb-kernel-debugging.rst
index 8e0f1fe..895285c 100644
--- a/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ b/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@
this mode. In this case, you should build the kernel with
CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+ make scripts_gdb
+
- Enable the gdb stub of QEMU/KVM, either
- at VM startup time by appending "-s" to the QEMU command line
diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
index 5c93ab9..e66916a 100644
--- a/Documentation/dev-tools/kasan.rst
+++ b/Documentation/dev-tools/kasan.rst
@@ -140,6 +140,23 @@
- ``kasan.vmalloc=off`` or ``=on`` disables or enables tagging of vmalloc
allocations (default: ``on``).
+- ``kasan.page_alloc.sample=<sampling interval>`` makes KASAN tag only every
+ Nth page_alloc allocation with the order equal or greater than
+ ``kasan.page_alloc.sample.order``, where N is the value of the ``sample``
+ parameter (default: ``1``, or tag every such allocation).
+ This parameter is intended to mitigate the performance overhead introduced
+ by KASAN.
+ Note that enabling this parameter makes Hardware Tag-Based KASAN skip checks
+ of allocations chosen by sampling and thus miss bad accesses to these
+ allocations. Use the default value for accurate bug detection.
+
+- ``kasan.page_alloc.sample.order=<minimum page order>`` specifies the minimum
+ order of allocations that are affected by sampling (default: ``3``).
+ Only applies when ``kasan.page_alloc.sample`` is set to a value greater
+ than ``1``.
+ This parameter is intended to allow sampling only large page_alloc
+ allocations, which is the biggest source of the performance overhead.
+
Error reports
~~~~~~~~~~~~~
diff --git a/Documentation/dev-tools/kunit/api/functionredirection.rst b/Documentation/dev-tools/kunit/api/functionredirection.rst
new file mode 100644
index 0000000..3791efc
--- /dev/null
+++ b/Documentation/dev-tools/kunit/api/functionredirection.rst
@@ -0,0 +1,162 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Function Redirection API
+========================
+
+Overview
+========
+
+When writing unit tests, it's important to be able to isolate the code being
+tested from other parts of the kernel. This ensures the reliability of the test
+(it won't be affected by external factors), reduces dependencies on specific
+hardware or config options (making the test easier to run), and protects the
+stability of the rest of the system (making it less likely for test-specific
+state to interfere with the rest of the system).
+
+While for some code (typically generic data structures, helpers, and other
+"pure functions") this is trivial, for others (like device drivers,
+filesystems, core subsystems) the code is heavily coupled with other parts of
+the kernel.
+
+This coupling is often due to global state in some way: be it a global list of
+devices, the filesystem, or some hardware state. Tests need to either carefully
+manage, isolate, and restore state, or they can avoid it altogether by
+replacing access to and mutation of this state with a "fake" or "mock" variant.
+
+By refactoring access to such state, such as by introducing a layer of
+indirection which can use or emulate a separate set of test state. However,
+such refactoring comes with its own costs (and undertaking significant
+refactoring before being able to write tests is suboptimal).
+
+A simpler way to intercept and replace some of the function calls is to use
+function redirection via static stubs.
+
+
+Static Stubs
+============
+
+Static stubs are a way of redirecting calls to one function (the "real"
+function) to another function (the "replacement" function).
+
+It works by adding a macro to the "real" function which checks to see if a test
+is running, and if a replacement function is available. If so, that function is
+called in place of the original.
+
+Using static stubs is pretty straightforward:
+
+1. Add the KUNIT_STATIC_STUB_REDIRECT() macro to the start of the "real"
+ function.
+
+ This should be the first statement in the function, after any variable
+ declarations. KUNIT_STATIC_STUB_REDIRECT() takes the name of the
+ function, followed by all of the arguments passed to the real function.
+
+ For example:
+
+ .. code-block:: c
+
+ void send_data_to_hardware(const char *str)
+ {
+ KUNIT_STATIC_STUB_REDIRECT(send_data_to_hardware, str);
+ /* real implementation */
+ }
+
+2. Write one or more replacement functions.
+
+ These functions should have the same function signature as the real function.
+ In the event they need to access or modify test-specific state, they can use
+ kunit_get_current_test() to get a struct kunit pointer. This can then
+ be passed to the expectation/assertion macros, or used to look up KUnit
+ resources.
+
+ For example:
+
+ .. code-block:: c
+
+ void fake_send_data_to_hardware(const char *str)
+ {
+ struct kunit *test = kunit_get_current_test();
+ KUNIT_EXPECT_STREQ(test, str, "Hello World!");
+ }
+
+3. Activate the static stub from your test.
+
+ From within a test, the redirection can be enabled with
+ kunit_activate_static_stub(), which accepts a struct kunit pointer,
+ the real function, and the replacement function. You can call this several
+ times with different replacement functions to swap out implementations of the
+ function.
+
+ In our example, this would be
+
+ .. code-block:: c
+
+ kunit_activate_static_stub(test,
+ send_data_to_hardware,
+ fake_send_data_to_hardware);
+
+4. Call (perhaps indirectly) the real function.
+
+ Once the redirection is activated, any call to the real function will call
+ the replacement function instead. Such calls may be buried deep in the
+ implementation of another function, but must occur from the test's kthread.
+
+ For example:
+
+ .. code-block:: c
+
+ send_data_to_hardware("Hello World!"); /* Succeeds */
+ send_data_to_hardware("Something else"); /* Fails the test. */
+
+5. (Optionally) disable the stub.
+
+ When you no longer need it, disable the redirection (and hence resume the
+ original behaviour of the 'real' function) using
+ kunit_deactivate_static_stub(). Otherwise, it will be automatically disabled
+ when the test exits.
+
+ For example:
+
+ .. code-block:: c
+
+ kunit_deactivate_static_stub(test, send_data_to_hardware);
+
+
+It's also possible to use these replacement functions to test to see if a
+function is called at all, for example:
+
+.. code-block:: c
+
+ void send_data_to_hardware(const char *str)
+ {
+ KUNIT_STATIC_STUB_REDIRECT(send_data_to_hardware, str);
+ /* real implementation */
+ }
+
+ /* In test file */
+ int times_called = 0;
+ void fake_send_data_to_hardware(const char *str)
+ {
+ times_called++;
+ }
+ ...
+ /* In the test case, redirect calls for the duration of the test */
+ kunit_activate_static_stub(test, send_data_to_hardware, fake_send_data_to_hardware);
+
+ send_data_to_hardware("hello");
+ KUNIT_EXPECT_EQ(test, times_called, 1);
+
+ /* Can also deactivate the stub early, if wanted */
+ kunit_deactivate_static_stub(test, send_data_to_hardware);
+
+ send_data_to_hardware("hello again");
+ KUNIT_EXPECT_EQ(test, times_called, 1);
+
+
+
+API Reference
+=============
+
+.. kernel-doc:: include/kunit/static_stub.h
+ :internal:
diff --git a/Documentation/dev-tools/kunit/api/index.rst b/Documentation/dev-tools/kunit/api/index.rst
index 45ce048..2d8f756 100644
--- a/Documentation/dev-tools/kunit/api/index.rst
+++ b/Documentation/dev-tools/kunit/api/index.rst
@@ -4,17 +4,24 @@
API Reference
=============
.. toctree::
+ :hidden:
test
resource
+ functionredirection
-This section documents the KUnit kernel testing API. It is divided into the
+
+This page documents the KUnit kernel testing API. It is divided into the
following sections:
Documentation/dev-tools/kunit/api/test.rst
- - documents all of the standard testing API
+ - Documents all of the standard testing API
Documentation/dev-tools/kunit/api/resource.rst
- - documents the KUnit resource API
+ - Documents the KUnit resource API
+
+Documentation/dev-tools/kunit/api/functionredirection.rst
+
+ - Documents the KUnit Function Redirection API
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index 48f8196..9faf2b4 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -648,10 +648,9 @@
access using the ``kunit_get_current_test()`` function in ``kunit/test-bug.h``.
``kunit_get_current_test()`` is safe to call even if KUnit is not enabled. If
-KUnit is not enabled, was built as a module (``CONFIG_KUNIT=m``), or no test is
-running in the current task, it will return ``NULL``. This compiles down to
-either a no-op or a static key check, so will have a negligible performance
-impact when no test is running.
+KUnit is not enabled, or if no test is running in the current task, it will
+return ``NULL``. This compiles down to either a no-op or a static key check,
+so will have a negligible performance impact when no test is running.
The example below uses this to implement a "mock" implementation of a function, ``foo``:
@@ -726,8 +725,6 @@
#endif
``kunit_fail_current_test()`` is safe to call even if KUnit is not enabled. If
-KUnit is not enabled, was built as a module (``CONFIG_KUNIT=m``), or no test is
-running in the current task, it will do nothing. This compiles down to either a
-no-op or a static key check, so will have a negligible performance impact when
-no test is running.
-
+KUnit is not enabled, or if no test is running in the current task, it will do
+nothing. This compiles down to either a no-op or a static key check, so will
+have a negligible performance impact when no test is running.
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index bf2d8a8..8b39589 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -28,7 +28,7 @@
find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
-name 'processed-schema*' \)
-find_cmd = $(find_all_cmd) | grep -F "$(DT_SCHEMA_FILES)"
+find_cmd = $(find_all_cmd) | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))"
CHK_DT_DOCS := $(shell $(find_cmd))
quiet_cmd_yamllint = LINT $(src)
diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
deleted file mode 100644
index cc5e190..0000000
--- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
+++ /dev/null
@@ -1,238 +0,0 @@
-==========================================
-ARM CPUs capacity bindings
-==========================================
-
-==========================================
-1 - Introduction
-==========================================
-
-ARM systems may be configured to have cpus with different power/performance
-characteristics within the same chip. In this case, additional information has
-to be made available to the kernel for it to be aware of such differences and
-take decisions accordingly.
-
-==========================================
-2 - CPU capacity definition
-==========================================
-
-CPU capacity is a number that provides the scheduler information about CPUs
-heterogeneity. Such heterogeneity can come from micro-architectural differences
-(e.g., ARM big.LITTLE systems) or maximum frequency at which CPUs can run
-(e.g., SMP systems with multiple frequency domains). Heterogeneity in this
-context is about differing performance characteristics; this binding tries to
-capture a first-order approximation of the relative performance of CPUs.
-
-CPU capacities are obtained by running a suitable benchmark. This binding makes
-no guarantees on the validity or suitability of any particular benchmark, the
-final capacity should, however, be:
-
-* A "single-threaded" or CPU affine benchmark
-* Divided by the running frequency of the CPU executing the benchmark
-* Not subject to dynamic frequency scaling of the CPU
-
-For the time being we however advise usage of the Dhrystone benchmark. What
-above thus becomes:
-
-CPU capacities are obtained by running the Dhrystone benchmark on each CPU at
-max frequency (with caches enabled). The obtained DMIPS score is then divided
-by the frequency (in MHz) at which the benchmark has been run, so that
-DMIPS/MHz are obtained. Such values are then normalized w.r.t. the highest
-score obtained in the system.
-
-==========================================
-3 - capacity-dmips-mhz
-==========================================
-
-capacity-dmips-mhz is an optional cpu node [1] property: u32 value
-representing CPU capacity expressed in normalized DMIPS/MHz. At boot time, the
-maximum frequency available to the cpu is then used to calculate the capacity
-value internally used by the kernel.
-
-capacity-dmips-mhz property is all-or-nothing: if it is specified for a cpu
-node, it has to be specified for every other cpu nodes, or the system will
-fall back to the default capacity value for every CPU. If cpufreq is not
-available, final capacities are calculated by directly using capacity-dmips-
-mhz values (normalized w.r.t. the highest value found while parsing the DT).
-
-===========================================
-4 - Examples
-===========================================
-
-Example 1 (ARM 64-bit, 6-cpu system, two clusters):
-The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
-are 1024 and 578 for cluster0 and cluster1. Further normalization
-is done by the operating system based on cluster0@max-freq=1100 and
-cluster1@max-freq=850, final capacities are 1024 for cluster0 and
-446 for cluster1 (578*850/1100).
-
-cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&A57_0>;
- };
- core1 {
- cpu = <&A57_1>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&A53_0>;
- };
- core1 {
- cpu = <&A53_1>;
- };
- core2 {
- cpu = <&A53_2>;
- };
- core3 {
- cpu = <&A53_3>;
- };
- };
- };
-
- idle-states {
- entry-method = "psci";
-
- CPU_SLEEP_0: cpu-sleep-0 {
- compatible = "arm,idle-state";
- arm,psci-suspend-param = <0x0010000>;
- local-timer-stop;
- entry-latency-us = <100>;
- exit-latency-us = <250>;
- min-residency-us = <150>;
- };
-
- CLUSTER_SLEEP_0: cluster-sleep-0 {
- compatible = "arm,idle-state";
- arm,psci-suspend-param = <0x1010000>;
- local-timer-stop;
- entry-latency-us = <800>;
- exit-latency-us = <700>;
- min-residency-us = <2500>;
- };
- };
-
- A57_0: cpu@0 {
- compatible = "arm,cortex-a57";
- reg = <0x0 0x0>;
- device_type = "cpu";
- enable-method = "psci";
- next-level-cache = <&A57_L2>;
- clocks = <&scpi_dvfs 0>;
- cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <1024>;
- };
-
- A57_1: cpu@1 {
- compatible = "arm,cortex-a57";
- reg = <0x0 0x1>;
- device_type = "cpu";
- enable-method = "psci";
- next-level-cache = <&A57_L2>;
- clocks = <&scpi_dvfs 0>;
- cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <1024>;
- };
-
- A53_0: cpu@100 {
- compatible = "arm,cortex-a53";
- reg = <0x0 0x100>;
- device_type = "cpu";
- enable-method = "psci";
- next-level-cache = <&A53_L2>;
- clocks = <&scpi_dvfs 1>;
- cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <578>;
- };
-
- A53_1: cpu@101 {
- compatible = "arm,cortex-a53";
- reg = <0x0 0x101>;
- device_type = "cpu";
- enable-method = "psci";
- next-level-cache = <&A53_L2>;
- clocks = <&scpi_dvfs 1>;
- cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <578>;
- };
-
- A53_2: cpu@102 {
- compatible = "arm,cortex-a53";
- reg = <0x0 0x102>;
- device_type = "cpu";
- enable-method = "psci";
- next-level-cache = <&A53_L2>;
- clocks = <&scpi_dvfs 1>;
- cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <578>;
- };
-
- A53_3: cpu@103 {
- compatible = "arm,cortex-a53";
- reg = <0x0 0x103>;
- device_type = "cpu";
- enable-method = "psci";
- next-level-cache = <&A53_L2>;
- clocks = <&scpi_dvfs 1>;
- cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <578>;
- };
-
- A57_L2: l2-cache0 {
- compatible = "cache";
- };
-
- A53_L2: l2-cache1 {
- compatible = "cache";
- };
-};
-
-Example 2 (ARM 32-bit, 4-cpu system, two clusters,
- cpus 0,1@1GHz, cpus 2,3@500MHz):
-capacities-dmips-mhz are scaled w.r.t. 2 (cpu@0 and cpu@1), this means that first
-cpu@0 and cpu@1 are twice fast than cpu@2 and cpu@3 (at the same frequency)
-
-cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0>;
- capacity-dmips-mhz = <2>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <1>;
- capacity-dmips-mhz = <2>;
- };
-
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0x100>;
- capacity-dmips-mhz = <1>;
- };
-
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0x101>;
- capacity-dmips-mhz = <1>;
- };
-};
-
-===========================================
-5 - References
-===========================================
-
-[1] ARM Linux Kernel documentation - CPUs bindings
- Documentation/devicetree/bindings/arm/cpus.yaml
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 01b5a9c..c145f6a 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -141,6 +141,7 @@
- arm,cortex-a78ae
- arm,cortex-a510
- arm,cortex-a710
+ - arm,cortex-a715
- arm,cortex-m0
- arm,cortex-m0+
- arm,cortex-m1
@@ -151,6 +152,7 @@
- arm,cortex-r7
- arm,cortex-x1
- arm,cortex-x2
+ - arm,cortex-x3
- arm,neoverse-e1
- arm,neoverse-n1
- arm,neoverse-n2
@@ -257,7 +259,7 @@
capacity-dmips-mhz:
description:
- u32 value representing CPU capacity (see ./cpu-capacity.txt) in
+ u32 value representing CPU capacity (see ../cpu/cpu-capacity.txt) in
DMIPS/MHz, relative to highest capacity-dmips-mhz
in the system.
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 0502db7..eccd4b7 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -10,6 +10,7 @@
- "mediatek,mt7622-ethsys", "syscon"
- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
- "mediatek,mt7629-ethsys", "syscon"
+ - "mediatek,mt7981-ethsys", "syscon"
- "mediatek,mt7986-ethsys", "syscon"
- #clock-cells: Must be 1
- #reset-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
index 1d7c837..e997635 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
@@ -28,6 +28,7 @@
- mediatek,mt6797-infracfg
- mediatek,mt7622-infracfg
- mediatek,mt7629-infracfg
+ - mediatek,mt7981-infracfg
- mediatek,mt7986-infracfg
- mediatek,mt8135-infracfg
- mediatek,mt8167-infracfg
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index 0711f18..d141034 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -31,7 +31,11 @@
- mediatek,mt8173-mmsys
- mediatek,mt8183-mmsys
- mediatek,mt8186-mmsys
+ - mediatek,mt8188-vdosys0
- mediatek,mt8192-mmsys
+ - mediatek,mt8195-vdosys1
+ - mediatek,mt8195-vppsys0
+ - mediatek,mt8195-vppsys1
- mediatek,mt8365-mmsys
- const: syscon
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
index 17fcbb4..d62d601 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
@@ -28,11 +28,9 @@
- mediatek,mt8195-imp_iic_wrap_s
- mediatek,mt8195-imp_iic_wrap_w
- mediatek,mt8195-mfgcfg
- - mediatek,mt8195-vppsys0
- mediatek,mt8195-wpesys
- mediatek,mt8195-wpesys_vpp0
- mediatek,mt8195-wpesys_vpp1
- - mediatek,mt8195-vppsys1
- mediatek,mt8195-imgsys
- mediatek,mt8195-imgsys1_dip_top
- mediatek,mt8195-imgsys1_dip_nr
@@ -93,13 +91,6 @@
};
- |
- vppsys0: clock-controller@14000000 {
- compatible = "mediatek,mt8195-vppsys0";
- reg = <0x14000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
wpesys: clock-controller@14e00000 {
compatible = "mediatek,mt8195-wpesys";
reg = <0x14e00000 0x1000>;
@@ -121,13 +112,6 @@
};
- |
- vppsys1: clock-controller@14f00000 {
- compatible = "mediatek,mt8195-vppsys1";
- reg = <0x14f00000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
imgsys: clock-controller@15000000 {
compatible = "mediatek,mt8195-imgsys";
reg = <0x15000000 0x1000>;
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
index 29ca7a1..d2c24c2 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
@@ -8,6 +8,8 @@
- compatible: Should be:
- "mediatek,mt7622-sgmiisys", "syscon"
- "mediatek,mt7629-sgmiisys", "syscon"
+ - "mediatek,mt7981-sgmiisys_0", "syscon"
+ - "mediatek,mt7981-sgmiisys_1", "syscon"
- "mediatek,mt7986-sgmiisys_0", "syscon"
- "mediatek,mt7986-sgmiisys_1", "syscon"
- #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
new file mode 100644
index 0000000..2ec9b5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Aggregator - TPDA
+
+description: |
+ TPDAs are responsible for packetization and timestamping of data sets
+ utilizing the MIPI STPv2 packet protocol. Pulling data sets from one or
+ more attached TPDM and pushing the resultant (packetized) data out a
+ master ATB interface. Performing an arbitrated ATB interleaving (funneling)
+ task for free-flowing data from TPDM (i.e. CMB and DSB data set flows).
+
+ There is no strict binding between TPDM and TPDA. TPDA can have multiple
+ TPDMs connect to it. But There must be only one TPDA in the path from the
+ TPDM source to TMC sink. TPDM can directly connect to TPDA's inport or
+ connect to funnel which will connect to TPDA's inport.
+
+ We can use the commands are similar to the below to validate TPDMs.
+ Enable coresight sink first.
+
+ echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
+ echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
+ echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
+ echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
+
+ The test data will be collected in the coresight sink which is enabled.
+ If rwp register of the sink is keeping updating when do integration_test
+ (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM
+ to sink.
+
+maintainers:
+ - Mao Jinlong <quic_jinlmao@quicinc.com>
+ - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,coresight-tpda
+ required:
+ - compatible
+
+properties:
+ $nodename:
+ pattern: "^tpda(@[0-9a-f]+)$"
+ compatible:
+ items:
+ - const: qcom,coresight-tpda
+ - const: arm,primecell
+
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: apb_pclk
+
+ in-ports:
+ type: object
+ description: |
+ Input connections from TPDM to TPDA
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ out-ports:
+ type: object
+ description: |
+ Output connections from the TPDA to legacy CoreSight trace bus.
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port:
+ description:
+ Output connection from the TPDA to legacy CoreSight Trace bus.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - in-ports
+ - out-ports
+
+additionalProperties: false
+
+examples:
+ # minimum tpda definition.
+ - |
+ tpda@6004000 {
+ compatible = "qcom,coresight-tpda", "arm,primecell";
+ reg = <0x6004000 0x1000>;
+
+ clocks = <&aoss_qmp>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ tpda_qdss_0_in_tpdm_dcc: endpoint {
+ remote-endpoint =
+ <&tpdm_dcc_out_tpda_qdss_0>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ tpda_qdss_out_funnel_in0: endpoint {
+ remote-endpoint =
+ <&funnel_in0_in_tpda_qdss>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
new file mode 100644
index 0000000..5c08342
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Monitor - TPDM
+
+description: |
+ The TPDM or Monitor serves as data collection component for various dataset
+ types specified in the QPMDA spec. It covers Implementation defined ((ImplDef),
+ Basic Counts (BC), Tenure Counts (TC), Continuous Multi-Bit (CMB), and Discrete
+ Single Bit (DSB). It performs data collection in the data producing clock
+ domain and transfers it to the data collection time domain, generally ATB
+ clock domain.
+
+ The primary use case of the TPDM is to collect data from different data
+ sources and send it to a TPDA for packetization, timestamping, and funneling.
+
+maintainers:
+ - Mao Jinlong <quic_jinlmao@quicinc.com>
+ - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,coresight-tpdm
+ required:
+ - compatible
+
+properties:
+ $nodename:
+ pattern: "^tpdm(@[0-9a-f]+)$"
+ compatible:
+ items:
+ - const: qcom,coresight-tpdm
+ - const: arm,primecell
+
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: apb_pclk
+
+ out-ports:
+ description: |
+ Output connections from the TPDM to coresight funnel/TPDA.
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port:
+ description: Output connection from the TPDM to coresight
+ funnel/TPDA.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ # minimum TPDM definition. TPDM connect to coresight TPDA.
+ - |
+ tpdm@684c000 {
+ compatible = "qcom,coresight-tpdm", "arm,primecell";
+ reg = <0x0684c000 0x1000>;
+
+ clocks = <&aoss_qmp>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ tpdm_prng_out_tpda_qdss: endpoint {
+ remote-endpoint =
+ <&tpda_qdss_in_tpdm_prng>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
index 52e1860..3786920 100644
--- a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
+++ b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
@@ -35,6 +35,7 @@
allOf:
- $ref: pata-common.yaml#
+ - $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml
new file mode 100644
index 0000000..2894256
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED Advanced High-Performance Bus Controller (AHBC)
+
+maintainers:
+ - Neal Liu <neal_liu@aspeedtech.com>
+ - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description: |
+ Advanced High-performance Bus Controller (AHBC) supports plenty of mechanisms
+ including a priority arbiter, an address decoder and a data multiplexer
+ to control the overall operations of Advanced High-performance Bus (AHB).
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2600-ahbc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ ahbc@1e600000 {
+ compatible = "aspeed,ast2600-ahbc";
+ reg = <0x1e600000 0x100>;
+ };
diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
deleted file mode 100644
index 5fb4e7b..0000000
--- a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
+++ /dev/null
@@ -1,168 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/bus/intel,ixp4xx-expansion-bus-controller.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel IXP4xx Expansion Bus Controller
-
-description: |
- The IXP4xx expansion bus controller handles access to devices on the
- memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
- including IXP42x, IXP43x, IXP45x and IXP46x.
-
-maintainers:
- - Linus Walleij <linus.walleij@linaro.org>
-
-properties:
- $nodename:
- pattern: '^bus@[0-9a-f]+$'
-
- compatible:
- items:
- - enum:
- - intel,ixp42x-expansion-bus-controller
- - intel,ixp43x-expansion-bus-controller
- - intel,ixp45x-expansion-bus-controller
- - intel,ixp46x-expansion-bus-controller
- - const: syscon
-
- reg:
- description: Control registers for the expansion bus, these are not
- inside the memory range handled by the expansion bus.
- maxItems: 1
-
- native-endian:
- $ref: /schemas/types.yaml#/definitions/flag
- description: The IXP4xx has a peculiar MMIO access scheme, as it changes
- the access pattern for words (swizzling) on the bus depending on whether
- the SoC is running in big-endian or little-endian mode. Thus the
- registers must always be accessed using native endianness.
-
- "#address-cells":
- description: |
- The first cell is the chip select number.
- The second cell is the address offset within the bank.
- const: 2
-
- "#size-cells":
- const: 1
-
- ranges: true
- dma-ranges: true
-
-patternProperties:
- "^.*@[0-7],[0-9a-f]+$":
- description: Devices attached to chip selects are represented as
- subnodes.
- type: object
-
- properties:
- intel,ixp4xx-eb-t1:
- description: Address timing, extend address phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 3
-
- intel,ixp4xx-eb-t2:
- description: Setup chip select timing, extend setup phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 3
-
- intel,ixp4xx-eb-t3:
- description: Strobe timing, extend strobe phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 15
-
- intel,ixp4xx-eb-t4:
- description: Hold timing, extend hold phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 3
-
- intel,ixp4xx-eb-t5:
- description: Recovery timing, extend recovery phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 15
-
- intel,ixp4xx-eb-cycle-type:
- description: The type of cycles to use on the expansion bus for this
- chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
-
- intel,ixp4xx-eb-byte-access-on-halfword:
- description: Allow byte read access on half word devices.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-hpi-hrdy-pol-high:
- description: Set HPI HRDY polarity to active high when using HPI.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-mux-address-and-data:
- description: Multiplex address and data on the data bus.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-ahb-split-transfers:
- description: Enable AHB split transfers.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-write-enable:
- description: Enable write cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-byte-access:
- description: Expansion bus uses only 8 bits. The default is to use
- 16 bits.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
-required:
- - compatible
- - reg
- - native-endian
- - "#address-cells"
- - "#size-cells"
- - ranges
- - dma-ranges
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/irq.h>
- bus@50000000 {
- compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
- reg = <0xc4000000 0x28>;
- native-endian;
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0x0 0x50000000 0x01000000>,
- <1 0x0 0x51000000 0x01000000>;
- dma-ranges = <0 0x0 0x50000000 0x01000000>,
- <1 0x0 0x51000000 0x01000000>;
- flash@0,0 {
- compatible = "intel,ixp4xx-flash", "cfi-flash";
- bank-width = <2>;
- reg = <0 0x00000000 0x1000000>;
- intel,ixp4xx-eb-t3 = <3>;
- intel,ixp4xx-eb-cycle-type = <0>;
- intel,ixp4xx-eb-byte-access-on-halfword = <1>;
- intel,ixp4xx-eb-write-enable = <1>;
- intel,ixp4xx-eb-byte-access = <0>;
- };
- serial@1,0 {
- compatible = "exar,xr16l2551", "ns8250";
- reg = <1 0x00000000 0x10>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- clock-frequency = <1843200>;
- intel,ixp4xx-eb-t3 = <3>;
- intel,ixp4xx-eb-cycle-type = <1>;
- intel,ixp4xx-eb-write-enable = <1>;
- intel,ixp4xx-eb-byte-access = <1>;
- };
- };
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index 61b246c..a2c6eea 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -54,6 +54,7 @@
- idt,5p49v5925
- idt,5p49v5933
- idt,5p49v5935
+ - idt,5p49v60
- idt,5p49v6901
- idt,5p49v6965
- idt,5p49v6975
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
index e4c4cad..0dbc143 100644
--- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -108,7 +108,7 @@
};
- |
- clock-controller@30390000 {
+ clock-controller@30380000 {
compatible = "fsl,imx8mq-ccm";
reg = <0x30380000 0x10000>;
#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
new file mode 100644
index 0000000..63a5901
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls2k-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC Clock Control Module
+
+maintainers:
+ - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+description: |
+ Loongson-2 SoC clock control module is an integrated clock controller, which
+ generates and supplies to all modules.
+
+properties:
+ compatible:
+ enum:
+ - loongson,ls2k-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: 100m ref
+
+ clock-names:
+ items:
+ - const: ref_100m
+
+ '#clock-cells':
+ const: 1
+ description:
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/loongson,ls2k-clk.h
+ for the full list of Loongson-2 SoC clock IDs.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ ref_100m: clock-ref-100m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "ref_100m";
+ };
+
+ clk: clock-controller@1fe00480 {
+ compatible = "loongson,ls2k-clk";
+ reg = <0x1fe00480 0x58>;
+ #clock-cells = <1>;
+ clocks = <&ref_100m>;
+ clock-names = "ref_100m";
+ };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
index 731bfe0..dae25db 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
@@ -20,6 +20,7 @@
- enum:
- mediatek,mt6797-apmixedsys
- mediatek,mt7622-apmixedsys
+ - mediatek,mt7981-apmixedsys
- mediatek,mt7986-apmixedsys
- mediatek,mt8135-apmixedsys
- mediatek,mt8173-apmixedsys
diff --git a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
index 81531b5..0fdf564 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
@@ -35,6 +35,7 @@
- mediatek,mt6779-topckgen
- mediatek,mt6795-topckgen
- mediatek,mt7629-topckgen
+ - mediatek,mt7981-topckgen
- mediatek,mt7986-topckgen
- mediatek,mt8167-topckgen
- mediatek,mt8183-topckgen
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
index 93ec1f5..426335a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
@@ -21,12 +21,16 @@
clocks:
items:
+ - description: AHB
- description: Board XO source
+ - description: Board active XO source
- description: Sleep clock source
clock-names:
items:
+ - const: iface
- const: bi_tcxo
+ - const: bi_tcxo_ao
- const: sleep_clk
'#clock-cells':
@@ -38,9 +42,18 @@
'#power-domain-cells':
const: 1
+ power-domains:
+ items:
+ - description: MMCX power domain
+
reg:
maxItems: 1
+ required-opps:
+ maxItems: 1
+ description:
+ OPP node describing required MMCX performance point.
+
required:
- compatible
- reg
@@ -54,13 +67,16 @@
examples:
- |
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@ad00000 {
compatible = "qcom,sm8250-camcc";
reg = <0x0ad00000 0x10000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
- clock-names = "bi_tcxo", "sleep_clk";
+ clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
index 8ade176..d846082 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
@@ -25,6 +25,30 @@
compatible:
const: qcom,gcc-apq8084
+ clocks:
+ items:
+ - description: XO source
+ - description: Sleep clock source
+ - description: UFS RX symbol 0 clock
+ - description: UFS RX symbol 1 clock
+ - description: UFS TX symbol 0 clock
+ - description: UFS TX symbol 1 clock
+ - description: SATA ASIC0 clock
+ - description: SATA RX clock
+ - description: PCIe PIPE clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sleep_clk
+ - const: ufs_rx_symbol_0_clk_src
+ - const: ufs_rx_symbol_1_clk_src
+ - const: ufs_tx_symbol_0_clk_src
+ - const: ufs_tx_symbol_1_clk_src
+ - const: sata_asic0_clk
+ - const: sata_rx_clk
+ - const: pcie_pipe
+
required:
- compatible
@@ -32,11 +56,31 @@
examples:
- |
+ /* UFS PHY on APQ8084 is not supported (yet), so these bindings just serve an example */
clock-controller@fc400000 {
compatible = "qcom,gcc-apq8084";
reg = <0xfc400000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
+
+ clocks = <&xo_board>,
+ <&sleep_clk>,
+ <&ufsphy 0>,
+ <&ufsphy 1>,
+ <&ufsphy 2>,
+ <&ufsphy 3>,
+ <&sata 0>,
+ <&sata 1>,
+ <&pcie_phy>;
+ clock-names = "xo",
+ "sleep_clk",
+ "ufs_rx_symbol_0_clk_src",
+ "ufs_rx_symbol_1_clk_src",
+ "ufs_tx_symbol_0_clk_src",
+ "ufs_tx_symbol_1_clk_src",
+ "sata_asic0_clk",
+ "sata_rx_clk",
+ "pcie_pipe";
};
...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
index 2d5355c..3c97290 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -25,7 +25,6 @@
- description: Board XO source
- description: Sleep clock source
- description: Audio reference clock (Optional clock)
- - description: PLL test clock source (Optional clock)
minItems: 2
clock-names:
@@ -33,7 +32,6 @@
- const: xo
- const: sleep_clk
- const: aud_ref_clk # Optional clock
- - const: core_bi_pll_test_se # Optional clock
minItems: 2
required:
@@ -57,11 +55,9 @@
reg = <0x00100000 0xb0000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&sleep>,
- <0>,
<0>;
clock-names = "xo",
"sleep_clk",
- "aud_ref_clk",
- "core_bi_pll_test_se";
+ "aud_ref_clk";
};
...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
index dca5775..b2256f8 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -20,26 +20,31 @@
compatible:
const: qcom,gcc-qcs404
- '#clock-cells':
- const: 1
+ clocks:
+ items:
+ - description: XO source
+ - description: Sleep clock source
+ - description: PCIe 0 PIPE clock (optional)
+ - description: DSI phy instance 0 dsi clock
+ - description: DSI phy instance 0 byte clock
+ - description: HDMI phy PLL clock
- '#reset-cells':
- const: 1
-
- reg:
- maxItems: 1
-
- protected-clocks:
- description:
- Protected clock specifier list as per common clock binding.
+ clock-names:
+ items:
+ - const: cxo
+ - const: sleep_clk
+ - const: pcie_0_pipe_clk_src
+ - const: dsi0pll
+ - const: dsi0pllbyte
+ - const: hdmi_pll
required:
- compatible
- - reg
- - '#clock-cells'
- - '#reset-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
@@ -48,5 +53,6 @@
reg = <0x01800000 0x80000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
};
...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
index c9d8e43..5681e53 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -55,6 +55,10 @@
- description: First EMAC controller reference clock
- description: Second EMAC controller reference clock
+ power-domains:
+ items:
+ - description: CX domain
+
protected-clocks:
maxItems: 389
@@ -70,6 +74,8 @@
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
clock-controller@100000 {
compatible = "qcom,gcc-sc8280xp";
reg = <0x00100000 0x1f0000>;
@@ -106,6 +112,7 @@
<&pcie4_lane>,
<&rxc0_ref_clk>,
<&rxc1_ref_clk>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
#clock-cells = <1>;
#reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
index 68d3099..428e954 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
@@ -24,15 +24,11 @@
items:
- description: Board XO source
- description: Sleep clock source
- - description: PLL test clock source (Optional clock)
- minItems: 2
clock-names:
items:
- const: bi_tcxo
- const: sleep_clk
- - const: core_bi_pll_test_se # Optional clock
- minItems: 2
required:
- compatible
@@ -51,8 +47,9 @@
compatible = "qcom,gcc-sdx55";
reg = <0x00100000 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&sleep_clk>, <&pll_test_clk>;
- clock-names = "bi_tcxo", "sleep_clk", "core_bi_pll_test_se";
+ <&sleep_clk>;
+ clock-names = "bi_tcxo",
+ "sleep_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
index ba62baa..523e18d7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
@@ -26,8 +26,6 @@
- description: Sleep clock source
- description: PCIE Pipe clock source
- description: USB3 phy wrapper pipe clock source
- - description: PLL test clock source (Optional clock)
- minItems: 5
clock-names:
items:
@@ -36,8 +34,6 @@
- const: sleep_clk
- const: pcie_pipe_clk
- const: usb3_phy_wrapper_gcc_usb30_pipe_clk
- - const: core_bi_pll_test_se # Optional clock
- minItems: 5
required:
- compatible
@@ -56,9 +52,9 @@
compatible = "qcom,gcc-sdx65";
reg = <0x100000 0x1f7400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
- <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>, <&pll_test_clk>;
+ <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
- "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk", "core_bi_pll_test_se";
+ "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
index 703d9e0..b4fdde7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
@@ -23,7 +23,6 @@
items:
- description: Board XO source
- description: Sleep clock source
- - description: PLL test clock source (Optional clock)
- description: PCIE 0 Pipe clock source (Optional clock)
- description: PCIE 1 Pipe clock source (Optional clock)
- description: UFS card Rx symbol 0 clock source (Optional clock)
@@ -40,7 +39,6 @@
items:
- const: bi_tcxo
- const: sleep_clk
- - const: core_bi_pll_test_se # Optional clock
- const: pcie_0_pipe_clk # Optional clock
- const: pcie_1_pipe_clk # Optional clock
- const: ufs_card_rx_symbol_0_clk # Optional clock
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
deleted file mode 100644
index fb7ae3d1..0000000
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
+++ /dev/null
@@ -1,71 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Graphics Clock & Reset Controller on SM8350
-
-maintainers:
- - Robert Foss <robert.foss@linaro.org>
-
-description: |
- Qualcomm graphics clock control module provides the clocks, resets and power
- domains on Qualcomm SoCs.
-
- See also:: include/dt-bindings/clock/qcom,gpucc-sm8350.h
-
-properties:
- compatible:
- enum:
- - qcom,sm8350-gpucc
-
- clocks:
- items:
- - description: Board XO source
- - description: GPLL0 main branch source
- - description: GPLL0 div branch source
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
-required:
- - compatible
- - reg
- - clocks
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,gcc-sm8350.h>
- #include <dt-bindings/clock/qcom,rpmh.h>
-
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- clock-controller@3d90000 {
- compatible = "qcom,sm8350-gpucc";
- reg = <0 0x03d90000 0 0x9000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_GPU_GPLL0_CLK_SRC>,
- <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
- };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 7256c43..db53eb2 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -21,6 +21,7 @@
include/dt-bindings/clock/qcom,gpucc-sm6350.h
include/dt-bindings/clock/qcom,gpucc-sm8150.h
include/dt-bindings/clock/qcom,gpucc-sm8250.h
+ include/dt-bindings/clock/qcom,gpucc-sm8350.h
properties:
compatible:
@@ -33,6 +34,7 @@
- qcom,sm6350-gpucc
- qcom,sm8150-gpucc
- qcom,sm8250-gpucc
+ - qcom,sm8350-gpucc
clocks:
items:
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index e6d1742..acf0c92 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -32,11 +32,11 @@
clocks:
minItems: 8
- maxItems: 10
+ maxItems: 13
clock-names:
minItems: 8
- maxItems: 10
+ maxItems: 13
'#clock-cells':
const: 1
@@ -142,6 +142,46 @@
compatible:
contains:
enum:
+ - qcom,mmcc-apq8084
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board sleep source
+ - description: MMSS GPLL0 voted clock
+ - description: GPLL0 clock
+ - description: GPLL0 voted clock
+ - description: GPLL1 clock
+ - description: DSI phy instance 0 dsi clock
+ - description: DSI phy instance 0 byte clock
+ - description: DSI phy instance 1 dsi clock
+ - description: DSI phy instance 1 byte clock
+ - description: HDMI phy PLL clock
+ - description: eDP phy PLL link clock
+ - description: eDP phy PLL vco clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sleep_clk
+ - const: mmss_gpll0_vote
+ - const: gpll0
+ - const: gpll0_vote
+ - const: gpll1
+ - const: dsi0pll
+ - const: dsi0pllbyte
+ - const: dsi1pll
+ - const: dsi1pllbyte
+ - const: hdmipll
+ - const: edp_link_clk
+ - const: edp_vco_div
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
- qcom,mmcc-msm8994
- qcom,mmcc-msm8998
- qcom,mmcc-sdm630
@@ -229,7 +269,6 @@
- description: HDMI phy PLL clock
- description: DisplayPort phy PLL link clock
- description: DisplayPort phy PLL vco clock
- - description: Test clock
clock-names:
items:
@@ -242,7 +281,6 @@
- const: hdmipll
- const: dplink
- const: dpvco
- - const: core_bi_pll_test_se
- if:
properties:
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
index c497123..fcace96 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
@@ -27,10 +27,12 @@
clocks:
items:
- description: XO source
+ - description: SYS APCS AUX clock
clock-names:
items:
- const: xo
+ - const: sys_apcs_aux
required:
- compatible
@@ -48,6 +50,6 @@
reg = <0x6400000 0x90000>;
#clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
+ clocks = <&xo_board>, <&apcs_glb>;
+ clock-names = "xo", "sys_apcs_aux";
};
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml
new file mode 100644
index 0000000..3ffe69d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8996-cbf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 Core Bus Fabric (CBF) clock controller
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: >
+ The clock controller for the Qualcomm MSM8996 CBF clock, which drives the
+ interconnect between two CPU clusters.
+
+properties:
+ compatible:
+ const: qcom,msm8996-cbf
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XO source
+ - description: SYS APCS AUX clock
+
+ '#clock-cells':
+ const: 0
+
+ '#interconnect-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ clock-controller@9a11000 {
+ compatible = "qcom,msm8996-cbf";
+ reg = <0x09a11000 0x10000>;
+ clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
+ #clock-cells = <0>;
+ #interconnect-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index cf25ba04..d5a250b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -18,6 +18,7 @@
compatible:
enum:
- qcom,qdu1000-rpmh-clk
+ - qcom,sa8775p-rpmh-clk
- qcom,sc7180-rpmh-clk
- qcom,sc7280-rpmh-clk
- qcom,sc8180x-rpmh-clk
@@ -31,6 +32,7 @@
- qcom,sm8250-rpmh-clk
- qcom,sm8350-rpmh-clk
- qcom,sm8450-rpmh-clk
+ - qcom,sm8550-rpmh-clk
clocks:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml
new file mode 100644
index 0000000..0f641c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sa8775p-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on sa8775p
+
+maintainers:
+ - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and
+ power domains on sa8775p.
+
+ See also:: include/dt-bindings/clock/qcom,sa8775p-gcc.h
+
+properties:
+ compatible:
+ const: qcom,sa8775p-gcc
+
+ clocks:
+ items:
+ - description: XO reference clock
+ - description: Sleep clock
+ - description: UFS memory first RX symbol clock
+ - description: UFS memory second RX symbol clock
+ - description: UFS memory first TX symbol clock
+ - description: UFS card first RX symbol clock
+ - description: UFS card second RX symbol clock
+ - description: UFS card first TX symbol clock
+ - description: Primary USB3 PHY wrapper pipe clock
+ - description: Secondary USB3 PHY wrapper pipe clock
+ - description: PCIe 0 pipe clock
+ - description: PCIe 1 pipe clock
+ - description: PCIe PHY clock
+ - description: First EMAC controller reference clock
+ - description: Second EMAC controller reference clock
+
+ protected-clocks:
+ maxItems: 240
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,sa8775p-gcc";
+ reg = <0x100000 0xc7018>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <&ufs_phy_rx_symbol_0_clk>,
+ <&ufs_phy_rx_symbol_1_clk>,
+ <&ufs_phy_tx_symbol_0_clk>,
+ <&ufs_card_rx_symbol_0_clk>,
+ <&ufs_card_rx_symbol_1_clk>,
+ <&ufs_card_tx_symbol_0_clk>,
+ <&usb_0_ssphy>,
+ <&usb_1_ssphy>,
+ <&pcie_0_pipe_clk>,
+ <&pcie_1_pipe_clk>,
+ <&pcie_phy_pipe_clk>,
+ <&rxc0_ref_clk>,
+ <&rxc1_ref_clk>;
+ power-domains = <&rpmhpd SA8775P_CX>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
index a52a83f..87ae741 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -32,6 +32,7 @@
A phandle and PM domain specifier for the MMCX power domain.
required-opps:
+ maxItems: 1
description:
A phandle to an OPP node describing required MMCX performance point.
diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt
deleted file mode 100644
index 7474aba..0000000
--- a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Qualcomm Technologies, Inc. SPMI PMIC clock divider (clkdiv)
-
-clkdiv configures the clock frequency of a set of outputs on the PMIC.
-These clocks are typically wired through alternate functions on
-gpio pins.
-
-=======================
-Properties
-=======================
-
-- compatible
- Usage: required
- Value type: <string>
- Definition: must be "qcom,spmi-clkdiv".
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: base address of CLKDIV peripherals.
-
-- qcom,num-clkdivs
- Usage: required
- Value type: <u32>
- Definition: number of CLKDIV peripherals.
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: reference to the xo clock.
-
-- clock-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "xo".
-
-- #clock-cells:
- Usage: required
- Value type: <u32>
- Definition: shall contain 1.
-
-=======
-Example
-=======
-
-pm8998_clk_divs: clock-controller@5b00 {
- compatible = "qcom,spmi-clkdiv";
- reg = <0x5b00>;
- #clock-cells = <1>;
- qcom,num-clkdivs = <3>;
- clocks = <&xo_board>;
- clock-names = "xo";
-
- assigned-clocks = <&pm8998_clk_divs 1>,
- <&pm8998_clk_divs 2>,
- <&pm8998_clk_divs 3>;
- assigned-clock-rates = <9600000>,
- <9600000>,
- <9600000>;
-};
diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml
new file mode 100644
index 0000000..16c95ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,spmi-clkdiv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMIC clock divider
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+ Qualcomm SPMI PMIC clock divider configures the clock frequency of a set of
+ outputs on the PMIC. These clocks are typically wired through alternate
+ functions on GPIO pins.
+
+properties:
+ compatible:
+ const: qcom,spmi-clkdiv
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Board XO source
+
+ clock-names:
+ items:
+ - const: xo
+
+ "#clock-cells":
+ const: 1
+
+ qcom,num-clkdivs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of CLKDIV peripherals.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - "#clock-cells"
+ - qcom,num-clkdivs
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-controller@5b00 {
+ compatible = "qcom,spmi-clkdiv";
+ reg = <0x5b00>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ qcom,num-clkdivs = <3>;
+
+ assigned-clocks = <&pm8998_clk_divs 1>,
+ <&pm8998_clk_divs 2>,
+ <&pm8998_clk_divs 3>;
+ assigned-clock-rates = <9600000>,
+ <9600000>,
+ <9600000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index e221985..2b07146 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -30,12 +30,12 @@
- qcom,sm8250-videocc
clocks:
- items:
- - description: Board XO source
+ minItems: 1
+ maxItems: 3
clock-names:
- items:
- - const: bi_tcxo
+ minItems: 1
+ maxItems: 3
'#clock-cells':
const: 1
@@ -68,6 +68,57 @@
- '#reset-cells'
- '#power-domain-cells'
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sc7180-videocc
+ - qcom,sdm845-videocc
+ - qcom,sm8150-videocc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+ clock-names:
+ items:
+ - const: bi_tcxo
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sc7280-videocc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board active XO source
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: bi_tcxo_ao
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm8250-videocc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: AHB
+ - description: Board XO source
+ - description: Board active XO source
+ clock-names:
+ items:
+ - const: iface
+ - const: bi_tcxo
+ - const: bi_tcxo_ao
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
index c3be1b6..c79e752 100644
--- a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
+++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
@@ -8,7 +8,6 @@
title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
maintainers:
- - Sagar Kadam <sagar.kadam@sifive.com>
- Paul Walmsley <paul.walmsley@sifive.com>
description:
diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
index 9a0cc73..4e82582 100644
--- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -61,40 +61,7 @@
examples:
- |
- sysctrl@61840000 {
- compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
- reg = <0x61840000 0x4000>;
-
- clock {
- compatible = "socionext,uniphier-ld11-clock";
- #clock-cells = <1>;
- };
-
- // other nodes ...
- };
-
- - |
- mioctrl@59810000 {
- compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
- reg = <0x59810000 0x800>;
-
- clock {
- compatible = "socionext,uniphier-ld11-mio-clock";
- #clock-cells = <1>;
- };
-
- // other nodes ...
- };
-
- - |
- perictrl@59820000 {
- compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
- reg = <0x59820000 0x200>;
-
- clock {
- compatible = "socionext,uniphier-ld11-peri-clock";
- #clock-cells = <1>;
- };
-
- // other nodes ...
+ clock-controller {
+ compatible = "socionext,uniphier-ld11-clock";
+ #clock-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/cpu/cpu-capacity.txt b/Documentation/devicetree/bindings/cpu/cpu-capacity.txt
new file mode 100644
index 0000000..f28e1ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpu/cpu-capacity.txt
@@ -0,0 +1,238 @@
+==========================================
+CPU capacity bindings
+==========================================
+
+==========================================
+1 - Introduction
+==========================================
+
+Some systems may be configured to have cpus with different power/performance
+characteristics within the same chip. In this case, additional information has
+to be made available to the kernel for it to be aware of such differences and
+take decisions accordingly.
+
+==========================================
+2 - CPU capacity definition
+==========================================
+
+CPU capacity is a number that provides the scheduler information about CPUs
+heterogeneity. Such heterogeneity can come from micro-architectural differences
+(e.g., ARM big.LITTLE systems) or maximum frequency at which CPUs can run
+(e.g., SMP systems with multiple frequency domains). Heterogeneity in this
+context is about differing performance characteristics; this binding tries to
+capture a first-order approximation of the relative performance of CPUs.
+
+CPU capacities are obtained by running a suitable benchmark. This binding makes
+no guarantees on the validity or suitability of any particular benchmark, the
+final capacity should, however, be:
+
+* A "single-threaded" or CPU affine benchmark
+* Divided by the running frequency of the CPU executing the benchmark
+* Not subject to dynamic frequency scaling of the CPU
+
+For the time being we however advise usage of the Dhrystone benchmark. What
+above thus becomes:
+
+CPU capacities are obtained by running the Dhrystone benchmark on each CPU at
+max frequency (with caches enabled). The obtained DMIPS score is then divided
+by the frequency (in MHz) at which the benchmark has been run, so that
+DMIPS/MHz are obtained. Such values are then normalized w.r.t. the highest
+score obtained in the system.
+
+==========================================
+3 - capacity-dmips-mhz
+==========================================
+
+capacity-dmips-mhz is an optional cpu node [1] property: u32 value
+representing CPU capacity expressed in normalized DMIPS/MHz. At boot time, the
+maximum frequency available to the cpu is then used to calculate the capacity
+value internally used by the kernel.
+
+capacity-dmips-mhz property is all-or-nothing: if it is specified for a cpu
+node, it has to be specified for every other cpu nodes, or the system will
+fall back to the default capacity value for every CPU. If cpufreq is not
+available, final capacities are calculated by directly using capacity-dmips-
+mhz values (normalized w.r.t. the highest value found while parsing the DT).
+
+===========================================
+4 - Examples
+===========================================
+
+Example 1 (ARM 64-bit, 6-cpu system, two clusters):
+The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
+are 1024 and 578 for cluster0 and cluster1. Further normalization
+is done by the operating system based on cluster0@max-freq=1100 and
+cluster1@max-freq=850, final capacities are 1024 for cluster0 and
+446 for cluster1 (578*850/1100).
+
+cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A57_0>;
+ };
+ core1 {
+ cpu = <&A57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <100>;
+ exit-latency-us = <250>;
+ min-residency-us = <150>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ local-timer-stop;
+ entry-latency-us = <800>;
+ exit-latency-us = <700>;
+ min-residency-us = <2500>;
+ };
+ };
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ };
+
+ A57_1: cpu@1 {
+ compatible = "arm,cortex-a57";
+ reg = <0x0 0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ };
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <578>;
+ };
+
+ A53_1: cpu@101 {
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <578>;
+ };
+
+ A53_2: cpu@102 {
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <578>;
+ };
+
+ A53_3: cpu@103 {
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ capacity-dmips-mhz = <578>;
+ };
+
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
+ };
+};
+
+Example 2 (ARM 32-bit, 4-cpu system, two clusters,
+ cpus 0,1@1GHz, cpus 2,3@500MHz):
+capacities-dmips-mhz are scaled w.r.t. 2 (cpu@0 and cpu@1), this means that first
+cpu@0 and cpu@1 are twice fast than cpu@2 and cpu@3 (at the same frequency)
+
+cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ capacity-dmips-mhz = <2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ capacity-dmips-mhz = <2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x100>;
+ capacity-dmips-mhz = <1>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x101>;
+ capacity-dmips-mhz = <1>;
+ };
+};
+
+===========================================
+5 - References
+===========================================
+
+[1] ARM Linux Kernel documentation - CPUs bindings
+ Documentation/devicetree/bindings/arm/cpus.yaml
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
index 026a9f9..4287678 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
@@ -14,6 +14,7 @@
enum:
- allwinner,sun8i-h3-crypto
- allwinner,sun8i-r40-crypto
+ - allwinner,sun20i-d1-crypto
- allwinner,sun50i-a64-crypto
- allwinner,sun50i-h5-crypto
- allwinner,sun50i-h6-crypto
@@ -29,6 +30,7 @@
- description: Bus clock
- description: Module clock
- description: MBus clock
+ - description: TRNG clock (RC oscillator)
minItems: 2
clock-names:
@@ -36,6 +38,7 @@
- const: bus
- const: mod
- const: ram
+ - const: trng
minItems: 2
resets:
@@ -44,19 +47,33 @@
if:
properties:
compatible:
- const: allwinner,sun50i-h6-crypto
+ enum:
+ - allwinner,sun20i-d1-crypto
then:
properties:
clocks:
- minItems: 3
+ minItems: 4
clock-names:
- minItems: 3
+ minItems: 4
else:
- properties:
- clocks:
- maxItems: 2
- clock-names:
- maxItems: 2
+ if:
+ properties:
+ compatible:
+ const: allwinner,sun50i-h6-crypto
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ minItems: 3
+ maxItems: 3
+ else:
+ properties:
+ clocks:
+ maxItems: 2
+ clock-names:
+ maxItems: 2
required:
- compatible
diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml
new file mode 100644
index 0000000..b18f178
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED ACRY ECDSA/RSA Hardware Accelerator Engines
+
+maintainers:
+ - Neal Liu <neal_liu@aspeedtech.com>
+
+description:
+ The ACRY ECDSA/RSA engines is designed to accelerate the throughput
+ of ECDSA/RSA signature and verification. Basically, ACRY can be
+ divided into two independent engines - ECC Engine and RSA Engine.
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2600-acry
+
+ reg:
+ items:
+ - description: acry base address & size
+ - description: acry sram base address & size
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ast2600-clock.h>
+ acry: crypto@1e6fa000 {
+ compatible = "aspeed,ast2600-acry";
+ reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+ interrupts = <160>;
+ clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+ };
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index 4ccb335..b767ec7 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -6,12 +6,18 @@
title: STMicroelectronics STM32 HASH
+description: The STM32 HASH block is built on the HASH block found in
+ the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+ SoC in 2010.
+
maintainers:
- Lionel Debieve <lionel.debieve@foss.st.com>
properties:
compatible:
enum:
+ - st,stn8820-hash
+ - stericsson,ux500-hash
- st,stm32f456-hash
- st,stm32f756-hash
@@ -41,11 +47,26 @@
maximum: 2
default: 0
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
- clocks
- - interrupts
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ items:
+ const: stericsson,ux500-hash
+ then:
+ properties:
+ interrupts: false
+ else:
+ required:
+ - interrupts
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
deleted file mode 100644
index 525a4bf..0000000
--- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Cadence DSI bridge
-==================
-
-The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes.
-
-Required properties:
-- compatible: should be set to "cdns,dsi".
-- reg: physical base address and length of the controller's registers.
-- interrupts: interrupt line connected to the DSI bridge.
-- clocks: DSI bridge clocks.
-- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk".
-- phys: phandle link to the MIPI D-PHY controller.
-- phy-names: must contain "dphy".
-- #address-cells: must be set to 1.
-- #size-cells: must be set to 0.
-
-Optional properties:
-- resets: DSI reset lines.
-- reset-names: can contain "dsi_p_rst".
-
-Required subnodes:
-- ports: Ports as described in Documentation/devicetree/bindings/graph.txt.
- 2 ports are available:
- * port 0: this port is only needed if some of your DSI devices are
- controlled through an external bus like I2C or SPI. Can have at
- most 4 endpoints. The endpoint number is directly encoding the
- DSI virtual channel used by this device.
- * port 1: represents the DPI input.
- Other ports will be added later to support the new kind of inputs.
-
-- one subnode per DSI device connected on the DSI bus. Each DSI device should
- contain a reg property encoding its virtual channel.
-
-Example:
- dsi0: dsi@fd0c0000 {
- compatible = "cdns,dsi";
- reg = <0x0 0xfd0c0000 0x0 0x1000>;
- clocks = <&pclk>, <&sysclk>;
- clock-names = "dsi_p_clk", "dsi_sys_clk";
- interrupts = <1>;
- phys = <&dphy0>;
- phy-names = "dphy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
- dsi0_dpi_input: endpoint {
- remote-endpoint = <&xxx_dpi_output>;
- };
- };
- };
-
- panel: dsi-dev@0 {
- compatible = "<vendor,panel>";
- reg = <0>;
- };
- };
-
-or
-
- dsi0: dsi@fd0c0000 {
- compatible = "cdns,dsi";
- reg = <0x0 0xfd0c0000 0x0 0x1000>;
- clocks = <&pclk>, <&sysclk>;
- clock-names = "dsi_p_clk", "dsi_sys_clk";
- interrupts = <1>;
- phys = <&dphy1>;
- phy-names = "dphy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- dsi0_output: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&dsi_panel_input>;
- };
- };
-
- port@1 {
- reg = <1>;
- dsi0_dpi_input: endpoint {
- remote-endpoint = <&xxx_dpi_output>;
- };
- };
- };
- };
-
- i2c@xxx {
- panel: panel@59 {
- compatible = "<vendor,panel>";
- reg = <0x59>;
-
- port {
- dsi_panel_input: endpoint {
- remote-endpoint = <&dsi0_output>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
new file mode 100644
index 0000000..2306032
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DSI bridge
+
+maintainers:
+ - Boris Brezillon <boris.brezillon@bootlin.com>
+
+description: |
+ CDNS DSI is a bridge device which converts DPI to DSI
+
+properties:
+ compatible:
+ enum:
+ - cdns,dsi
+ - ti,j721e-dsi
+
+ reg:
+ minItems: 1
+ items:
+ - description:
+ Register block for controller's registers.
+ - description:
+ Register block for wrapper settings registers in case of TI J7 SoCs.
+
+ clocks:
+ items:
+ - description: PSM clock, used by the IP
+ - description: sys clock, used by the IP
+
+ clock-names:
+ items:
+ - const: dsi_p_clk
+ - const: dsi_sys_clk
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: dphy
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: dsi_p_rst
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port representing the DSI output. It can have
+ at most 4 endpoints. The endpoint number is directly encoding
+ the DSI virtual channel used by this device.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Input port representing the DPI input.
+
+ required:
+ - port@1
+
+allOf:
+ - $ref: ../dsi-controller.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,j721e-dsi
+ then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+ power-domains:
+ maxItems: 1
+ else:
+ properties:
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dsi@fd0c0000 {
+ compatible = "cdns,dsi";
+ reg = <0x0 0xfd0c0000 0x0 0x1000>;
+ clocks = <&pclk>, <&sysclk>;
+ clock-names = "dsi_p_clk", "dsi_sys_clk";
+ interrupts = <1>;
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&xxx_dpi_output>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "panasonic,vvx10f034n00";
+ reg = <0>;
+ power-supply = <&vcc_lcd_reg>;
+ };
+ };
+ };
+
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dsi@fd0c0000 {
+ compatible = "cdns,dsi";
+ reg = <0x0 0xfd0c0000 0x0 0x1000>;
+ clocks = <&pclk>, <&sysclk>;
+ clock-names = "dsi_p_clk", "dsi_sys_clk";
+ interrupts = <1>;
+ phys = <&dphy1>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_panel_input>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&xxx_dpi_output>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
index b19be08..6e0e3ba 100644
--- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -16,7 +16,9 @@
properties:
compatible:
- const: fsl,imx8mp-ldb
+ enum:
+ - fsl,imx8mp-ldb
+ - fsl,imx93-ldb
clocks:
maxItems: 1
@@ -57,6 +59,18 @@
- clocks
- ports
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx93-ldb
+ then:
+ properties:
+ ports:
+ properties:
+ port@2: false
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
index b697c42..c9a882e 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -52,9 +52,49 @@
maxItems: 1
description: extcon specifier for the Power Delivery
- port:
- $ref: /schemas/graph.yaml#/properties/port
- description: A port node pointing to DPI host port node
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: A port node pointing to DPI host port node
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ link-frequencies:
+ minItems: 1
+ maxItems: 1
+ description: Allowed max link frequencies in Hz
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Video port for DP output
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ uniqueItems: true
+ items:
+ - enum: [ 0, 1 ]
+ - const: 1
+ - const: 2
+ - const: 3
+
+ required:
+ - port@0
+ - port@1
required:
- compatible
@@ -63,6 +103,7 @@
- interrupts
- reset-gpios
- extcon
+ - ports
additionalProperties: false
@@ -85,9 +126,24 @@
reset-gpios = <&pio 179 1>;
extcon = <&usbc_extcon>;
- port {
- it6505_in: endpoint {
- remote-endpoint = <&dpi_out>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ it6505_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ link-frequencies = /bits/ 64 <150000000>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ it6505_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ data-lanes = <0 1>;
+ };
};
};
};
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
index d3454da..a7eb260 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -17,7 +17,9 @@
properties:
compatible:
- const: ite,it66121
+ enum:
+ - ite,it66121
+ - ite,it6610
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
index afeeb96..d33026f 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@@ -11,13 +11,14 @@
description: |
This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
- R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up
+ R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up
to four data lanes.
properties:
compatible:
enum:
- renesas,r8a779a0-dsi-csi2-tx # for V3U
+ - renesas,r8a779g0-dsi-csi2-tx # for V4H
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
index 131d5b6..e08c246 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -22,6 +22,7 @@
items:
- enum:
- renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
+ - renesas,r9a07g054-mipi-dsi # RZ/V2L
- const: renesas,rzg2l-mipi-dsi
reg:
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml
new file mode 100644
index 0000000..6d1a36b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii8620.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI8620 HDMI/MHL bridge
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+ compatible:
+ const: sil,sii8620
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: xtal
+
+ cvcc10-supply:
+ description: Digital Core Supply Voltage (1.0V)
+
+ interrupts:
+ maxItems: 1
+
+ iovcc18-supply:
+ description: I/O Supply Voltage (1.8V)
+
+ reset-gpios:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ unevaluatedProperties: false
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for HDMI (encoder) input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MHL to connector port
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - cvcc10-supply
+ - interrupts
+ - iovcc18-supply
+ - reset-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@39 {
+ reg = <0x39>;
+ compatible = "sil,sii8620";
+ cvcc10-supply = <&ldo36_reg>;
+ iovcc18-supply = <&ldo34_reg>;
+ interrupt-parent = <&gpf0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "xtal";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mhl_to_musb_con: endpoint {
+ remote-endpoint = <&musb_con_to_mhl>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
deleted file mode 100644
index b05052f..0000000
--- a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Silicon Image SiI8620 HDMI/MHL bridge bindings
-
-Required properties:
- - compatible: "sil,sii8620"
- - reg: i2c address of the bridge
- - cvcc10-supply: Digital Core Supply Voltage (1.0V)
- - iovcc18-supply: I/O Supply Voltage (1.8V)
- - interrupts: interrupt specifier of INT pin
- - reset-gpios: gpio specifier of RESET pin
- - clocks, clock-names: specification and name of "xtal" clock
- - video interfaces: Device node can contain video interface port
- node for HDMI encoder according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
- sii8620@39 {
- reg = <0x39>;
- compatible = "sil,sii8620";
- cvcc10-supply = <&ldo36_reg>;
- iovcc18-supply = <&ldo34_reg>;
- interrupt-parent = <&gpf0>;
- interrupts = <2 0>;
- reset-gpio = <&gpv7 0 0>;
- clocks = <&pmu_system_controller 0>;
- clock-names = "xtal";
-
- port {
- mhl_to_hdmi: endpoint {
- remote-endpoint = <&hdmi_to_mhl>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
index d4d5854..9274148 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -31,6 +31,7 @@
- items:
- enum:
- mediatek,mt8186-disp-aal
+ - mediatek,mt8188-disp-aal
- mediatek,mt8192-disp-aal
- mediatek,mt8195-disp-aal
- const: mediatek,mt8183-disp-aal
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
index 63fb020..b04820c 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -27,12 +27,13 @@
- const: mediatek,mt8192-disp-ccorr
- items:
- enum:
+ - mediatek,mt8188-disp-ccorr
- mediatek,mt8195-disp-ccorr
- const: mediatek,mt8192-disp-ccorr
- items:
- enum:
- mediatek,mt8186-disp-ccorr
- - const: mediatek,mt8183-disp-ccorr
+ - const: mediatek,mt8192-disp-ccorr
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
index d2f89ee..62306c8 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -37,6 +37,7 @@
- enum:
- mediatek,mt8183-disp-color
- mediatek,mt8186-disp-color
+ - mediatek,mt8188-disp-color
- mediatek,mt8192-disp-color
- mediatek,mt8195-disp-color
- const: mediatek,mt8173-disp-color
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
index 8ad8187..5c7445c 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
@@ -27,6 +27,7 @@
- items:
- enum:
- mediatek,mt8186-disp-dither
+ - mediatek,mt8188-disp-dither
- mediatek,mt8192-disp-dither
- mediatek,mt8195-disp-dither
- const: mediatek,mt8183-disp-dither
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
index a89ea0e..a5c6a91 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -28,6 +28,7 @@
- items:
- enum:
- mediatek,mt8186-disp-gamma
+ - mediatek,mt8188-disp-gamma
- mediatek,mt8192-disp-gamma
- mediatek,mt8195-disp-gamma
- const: mediatek,mt8183-disp-gamma
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
index a2a27d0..065e526 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -36,6 +36,7 @@
- const: mediatek,mt2701-disp-ovl
- items:
- enum:
+ - mediatek,mt8188-disp-ovl
- mediatek,mt8195-disp-ovl
- const: mediatek,mt8183-disp-ovl
- items:
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
index 654080b..27de644 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
@@ -26,6 +26,7 @@
- items:
- enum:
- mediatek,mt8186-disp-postmask
+ - mediatek,mt8188-disp-postmask
- const: mediatek,mt8192-disp-postmask
reg:
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
index 0882ae8..3ade2ec 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -33,6 +33,10 @@
- const: mediatek,mt8195-disp-rdma
- items:
- enum:
+ - mediatek,mt8188-disp-rdma
+ - const: mediatek,mt8195-disp-rdma
+ - items:
+ - enum:
- mediatek,mt7623-disp-rdma
- mediatek,mt2712-disp-rdma
- const: mediatek,mt2701-disp-rdma
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index f2515af..0e8d8df 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -21,6 +21,9 @@
- qcom,sc7280-edp
- qcom,sc8180x-dp
- qcom,sc8180x-edp
+ - qcom,sc8280xp-dp
+ - qcom,sc8280xp-edp
+ - qcom,sdm845-dp
- qcom,sm8350-dp
reg:
@@ -68,8 +71,7 @@
items:
- const: dp
- operating-points-v2:
- maxItems: 1
+ operating-points-v2: true
opp-table: true
@@ -81,6 +83,7 @@
data-lanes:
$ref: /schemas/types.yaml#/definitions/uint32-array
+ deprecated: true
minItems: 1
maxItems: 4
items:
@@ -102,8 +105,28 @@
description: Input endpoint of the controller
port@1:
- $ref: /schemas/graph.yaml#/properties/port
+ $ref: /schemas/graph.yaml#/$defs/port-base
description: Output endpoint of the controller
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [ 0, 1, 2, 3 ]
+
+ link-frequencies:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ]
+
+ required:
+ - port@0
+ - port@1
required:
- compatible
@@ -127,11 +150,10 @@
enum:
- qcom,sc7280-edp
- qcom,sc8180x-edp
+ - qcom,sc8280xp-edp
then:
properties:
"#sound-dai-cells": false
- reg:
- maxItems: 4
else:
properties:
aux-bus: false
@@ -193,6 +215,8 @@
reg = <1>;
endpoint {
remote-endpoint = <&typec>;
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
};
};
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
index 8ffbc30..3f953aa 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
@@ -13,7 +13,15 @@
description: |
Common properties for QCom DPU display controller.
+# Do not select this by default, otherwise it is also selected for all
+# display-controller@ nodes
+select:
+ false
+
properties:
+ $nodename:
+ pattern: '^display-controller@[0-9a-f]+$'
+
interrupts:
maxItems: 1
@@ -40,10 +48,6 @@
- port@0
required:
- - compatible
- - reg
- - reg-names
- - clocks
- interrupts
- power-domains
- operating-points-v2
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 6e2fd6e..e75a3ef 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -9,14 +9,33 @@
maintainers:
- Krishna Manikandan <quic_mkrishn@quicinc.com>
-allOf:
- - $ref: "../dsi-controller.yaml#"
-
properties:
compatible:
- enum:
- - qcom,mdss-dsi-ctrl
- - qcom,dsi-ctrl-6g-qcm2290
+ oneOf:
+ - items:
+ - enum:
+ - qcom,apq8064-dsi-ctrl
+ - qcom,msm8916-dsi-ctrl
+ - qcom,msm8953-dsi-ctrl
+ - qcom,msm8974-dsi-ctrl
+ - qcom,msm8996-dsi-ctrl
+ - qcom,msm8998-dsi-ctrl
+ - qcom,qcm2290-dsi-ctrl
+ - qcom,sc7180-dsi-ctrl
+ - qcom,sc7280-dsi-ctrl
+ - qcom,sdm660-dsi-ctrl
+ - qcom,sdm845-dsi-ctrl
+ - qcom,sm8150-dsi-ctrl
+ - qcom,sm8250-dsi-ctrl
+ - qcom,sm8350-dsi-ctrl
+ - qcom,sm8450-dsi-ctrl
+ - qcom,sm8550-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+ - items:
+ - enum:
+ - dsi-ctrl-6g-qcm2290
+ - const: qcom,mdss-dsi-ctrl
+ deprecated: true
reg:
maxItems: 1
@@ -28,22 +47,23 @@
maxItems: 1
clocks:
- items:
- - description: Display byte clock
- - description: Display byte interface clock
- - description: Display pixel clock
- - description: Display core clock
- - description: Display AHB clock
- - description: Display AXI clock
+ description: |
+ Several clocks are used, depending on the variant. Typical ones are::
+ - bus:: Display AHB clock.
+ - byte:: Display byte clock.
+ - byte_intf:: Display byte interface clock.
+ - core:: Display core clock.
+ - core_mss:: Core MultiMedia SubSystem clock.
+ - iface:: Display AXI clock.
+ - mdp_core:: MDP Core clock.
+ - mnoc:: MNOC clock
+ - pixel:: Display pixel clock.
+ minItems: 3
+ maxItems: 9
clock-names:
- items:
- - const: byte
- - const: byte_intf
- - const: pixel
- - const: core
- - const: iface
- - const: bus
+ minItems: 3
+ maxItems: 9
phys:
maxItems: 1
@@ -52,10 +72,6 @@
deprecated: true
const: dsi
- "#address-cells": true
-
- "#size-cells": true
-
syscon-sfpb:
description: A phandle to mmss_sfpb syscon node (only for DSIv2).
$ref: "/schemas/types.yaml#/definitions/phandle"
@@ -67,12 +83,16 @@
2 DSI links.
assigned-clocks:
- maxItems: 2
+ minItems: 2
+ maxItems: 4
description: |
Parents of "byte" and "pixel" for the given platform.
+ For DSIv2 platforms this should contain "byte", "esc", "src" and
+ "pixel_src" clocks.
assigned-clock-parents:
- maxItems: 2
+ minItems: 2
+ maxItems: 4
description: |
The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
@@ -103,7 +123,7 @@
properties:
data-lanes:
maxItems: 4
- minItems: 4
+ minItems: 1
items:
enum: [ 0, 1, 2, 3 ]
@@ -119,7 +139,7 @@
properties:
data-lanes:
maxItems: 4
- minItems: 4
+ minItems: 1
items:
enum: [ 0, 1, 2, 3 ]
@@ -127,6 +147,26 @@
- port@0
- port@1
+ avdd-supply:
+ description:
+ Phandle to vdd regulator device node
+
+ vcca-supply:
+ description:
+ Phandle to vdd regulator device node
+
+ vdd-supply:
+ description:
+ VDD regulator
+
+ vddio-supply:
+ description:
+ VDD-IO regulator
+
+ vdda-supply:
+ description:
+ VDDA regulator
+
required:
- compatible
- reg
@@ -139,7 +179,192 @@
- assigned-clock-parents
- ports
-additionalProperties: false
+allOf:
+ - $ref: ../dsi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,apq8064-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 7
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core_mmss
+ - const: src
+ - const: byte
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8916-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: iface
+ - const: bus
+ - const: byte
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8953-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: iface
+ - const: bus
+ - const: byte
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8974-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 7
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: iface
+ - const: bus
+ - const: byte
+ - const: pixel
+ - const: core
+ - const: core_mmss
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8996-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 7
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: byte
+ - const: iface
+ - const: bus
+ - const: core_mmss
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8998-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: byte
+ - const: byte_intf
+ - const: pixel
+ - const: core
+ - const: iface
+ - const: bus
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7180-dsi-ctrl
+ - qcom,sc7280-dsi-ctrl
+ - qcom,sm8150-dsi-ctrl
+ - qcom,sm8250-dsi-ctrl
+ - qcom,sm8350-dsi-ctrl
+ - qcom,sm8450-dsi-ctrl
+ - qcom,sm8550-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: byte
+ - const: byte_intf
+ - const: pixel
+ - const: core
+ - const: iface
+ - const: bus
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm660-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 9
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: byte
+ - const: byte_intf
+ - const: mnoc
+ - const: iface
+ - const: bus
+ - const: core_mmss
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm845-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: byte
+ - const: byte_intf
+ - const: pixel
+ - const: core
+ - const: iface
+ - const: bus
+
+unevaluatedProperties: false
examples:
- |
@@ -149,7 +374,7 @@
#include <dt-bindings/power/qcom-rpmpd.h>
dsi@ae94000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0ae94000 0x400>;
reg-names = "dsi_ctrl";
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 2f1fd14..cf4a338 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -16,6 +16,7 @@
compatible:
enum:
- qcom,dsi-phy-28nm-hpm
+ - qcom,dsi-phy-28nm-hpm-fam-b
- qcom,dsi-phy-28nm-lp
- qcom,dsi-phy-28nm-8960
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index c851770..8e9031b 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -18,6 +18,10 @@
- qcom,dsi-phy-7nm
- qcom,dsi-phy-7nm-8150
- qcom,sc7280-dsi-phy-7nm
+ - qcom,sm6375-dsi-phy-7nm
+ - qcom,sm8350-dsi-phy-5nm
+ - qcom,sm8450-dsi-phy-5nm
+ - qcom,sm8550-dsi-phy-4nm
reg:
items:
@@ -44,7 +48,6 @@
- compatible
- reg
- reg-names
- - vdds-supply
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
index 76d40f7..0f6f088 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -4,14 +4,13 @@
$id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Description of Qualcomm Display DSI PHY common dt properties
+title: Qualcomm Display DSI PHY Common Properties
maintainers:
- Krishna Manikandan <quic_mkrishn@quicinc.com>
-description: |
- This defines the DSI PHY dt properties which are common for all
- dsi phy versions.
+description:
+ Common properties for Qualcomm Display DSI PHY.
properties:
"#clock-cells":
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index c5f4984..d4191cc 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -89,7 +89,7 @@
help bring the GPU out of secure mode.
properties:
memory-region:
- $ref: /schemas/types.yaml#/definitions/phandle
+ maxItems: 1
firmware-name:
description: |
@@ -149,6 +149,8 @@
description: GPU 3D engine clock
- const: rbbmtimer
description: GPU RBBM Timer for Adreno 5xx series
+ - const: rbcpr
+ description: GPU RB Core Power Reduction clock
minItems: 2
maxItems: 7
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
deleted file mode 100644
index 65d03c5..0000000
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-Qualcomm adreno/snapdragon MDP5 display controller
-
-Description:
-
-This is the bindings documentation for the MDP5 display
-controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
-
-MDP5:
-Required properties:
-- compatible:
- * "qcom,mdp5" - MDP5
-- reg: Physical base address and length of the controller's registers.
-- reg-names: The names of register regions. The following regions are required:
- * "mdp_phys"
-- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
-- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-- * "bus"
-- * "iface"
-- * "core"
-- * "vsync"
-- ports: contains the list of output ports from MDP. These connect to interfaces
- that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
- special case since it is a part of the MDP block itself).
-
- Each output port contains an endpoint that describes how it is connected to an
- external interface. These are described by the standard properties documented
- here:
- Documentation/devicetree/bindings/graph.txt
- Documentation/devicetree/bindings/media/video-interfaces.txt
-
- The availability of output ports can vary across SoC revisions:
-
- For MSM8974 and APQ8084:
- Port 0 -> MDP_INTF0 (eDP)
- Port 1 -> MDP_INTF1 (DSI1)
- Port 2 -> MDP_INTF2 (DSI2)
- Port 3 -> MDP_INTF3 (HDMI)
-
- For MSM8916:
- Port 0 -> MDP_INTF1 (DSI1)
-
- For MSM8994 and MSM8996:
- Port 0 -> MDP_INTF1 (DSI1)
- Port 1 -> MDP_INTF2 (DSI2)
- Port 2 -> MDP_INTF3 (HDMI)
-
-Optional properties:
-- clock-names: the following clocks are optional:
- * "lut"
- * "tbu"
- * "tbu_rt"
-
-Example:
-
-/ {
- ...
-
- mdss: mdss@1a00000 {
- compatible = "qcom,mdss";
- reg = <0x1a00000 0x1000>,
- <0x1ac8000 0x3000>;
- reg-names = "mdss_phys", "vbif_phys";
-
- power-domains = <&gcc MDSS_GDSC>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "vsync"
-
- interrupts = <0 72 0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mdp: mdp@1a01000 {
- compatible = "qcom,mdp5";
- reg = <0x1a01000 0x90000>;
- reg-names = "mdp_phys";
-
- interrupt-parent = <&mdss>;
- interrupts = <0 0>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_MDP_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "core",
- "vsync";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdp5_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
- };
- };
-
- dsi0: dsi@1a98000 {
- ...
- ports {
- ...
- port@0 {
- reg = <0>;
- dsi0_in: endpoint {
- remote-endpoint = <&mdp5_intf1_out>;
- };
- };
- ...
- };
- ...
- };
-
- dsi_phy0: dsi-phy@1a98300 {
- ...
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
index 27d7242..ccd7d64 100644
--- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
@@ -15,7 +15,15 @@
Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
sub-blocks like DPU display controller, DSI and DP interfaces etc.
+# Do not select this by default, otherwise it is also selected for qcom,mdss
+# devices.
+select:
+ false
+
properties:
+ $nodename:
+ pattern: "^display-subsystem@[0-9a-f]+$"
+
reg:
maxItems: 1
@@ -70,7 +78,6 @@
- description: MDSS_CORE reset
required:
- - compatible
- reg
- reg-names
- power-domains
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
new file mode 100644
index 0000000..ef461ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5)
+
+description:
+ MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994
+ and MSM8996.
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: qcom,mdp5
+ deprecated: true
+ - items:
+ - enum:
+ - qcom,apq8084-mdp5
+ - qcom,msm8916-mdp5
+ - qcom,msm8917-mdp5
+ - qcom,msm8953-mdp5
+ - qcom,msm8974-mdp5
+ - qcom,msm8976-mdp5
+ - qcom,msm8994-mdp5
+ - qcom,msm8996-mdp5
+ - qcom,sdm630-mdp5
+ - qcom,sdm660-mdp5
+ - const: qcom,mdp5
+
+ $nodename:
+ pattern: '^display-controller@[0-9a-f]+$'
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: mdp_phys
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 4
+ maxItems: 7
+
+ clock-names:
+ oneOf:
+ - minItems: 4
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+ - const: lut
+ - const: tbu
+ - const: tbu_rt
+ #MSM8996 has additional iommu clock
+ - items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: iommu
+ - const: vsync
+
+ interconnects:
+ minItems: 1
+ items:
+ - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+ - description: Interconnect path from mdp1 port to the data bus
+ - description: Interconnect path from rotator port to the data bus
+
+ interconnect-names:
+ minItems: 1
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+ - const: rotator-mem
+
+ iommus:
+ items:
+ - description: apps SMMU with the Stream-ID mask for Hard-Fail port0
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: >
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc. MDP5 devices support up to 4 ports:
+ one or two DSI ports, HDMI and eDP.
+
+ patternProperties:
+ "^port@[0-3]+$":
+ $ref: /schemas/graph.yaml#/properties/port
+
+ # at least one port is required
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ display-controller@1a01000 {
+ compatible = "qcom,mdp5";
+ reg = <0x1a01000 0x90000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index ba04602..20889e4 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -15,6 +15,9 @@
encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc.
properties:
+ $nodename:
+ pattern: "^display-subsystem@[0-9a-f]+$"
+
compatible:
enum:
- qcom,mdss
@@ -44,18 +47,30 @@
The MDSS power domain provided by GCC
clocks:
- minItems: 1
- items:
- - description: Display abh clock
- - description: Display axi clock
- - description: Display vsync clock
+ oneOf:
+ - minItems: 3
+ items:
+ - description: Display abh clock
+ - description: Display axi clock
+ - description: Display vsync clock
+ - description: Display core clock
+ - minItems: 1
+ items:
+ - description: Display abh clock
+ - description: Display core clock
clock-names:
- minItems: 1
- items:
- - const: iface
- - const: bus
- - const: vsync
+ oneOf:
+ - minItems: 3
+ items:
+ - const: iface
+ - const: bus
+ - const: vsync
+ - const: core
+ - minItems: 1
+ items:
+ - const: iface
+ - const: core
"#address-cells":
const: 1
@@ -84,17 +99,19 @@
- ranges
patternProperties:
- "^mdp@[1-9a-f][0-9a-f]*$":
+ "^display-controller@[1-9a-f][0-9a-f]*$":
type: object
properties:
compatible:
- const: qcom,mdp5
+ contains:
+ const: qcom,mdp5
"^dsi@[1-9a-f][0-9a-f]*$":
type: object
properties:
compatible:
- const: qcom,mdss-dsi-ctrl
+ contains:
+ const: qcom,mdss-dsi-ctrl
"^phy@[1-9a-f][0-9a-f]*$":
type: object
@@ -107,12 +124,6 @@
- qcom,dsi-phy-20nm
- qcom,dsi-phy-28nm-hpm
- qcom,dsi-phy-28nm-lp
-
- "^hdmi-phy@[1-9a-f][0-9a-f]*$":
- type: object
- properties:
- compatible:
- enum:
- qcom,hdmi-phy-8084
- qcom,hdmi-phy-8660
- qcom,hdmi-phy-8960
@@ -137,7 +148,7 @@
- |
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- mdss@1a00000 {
+ display-subsystem@1a00000 {
compatible = "qcom,mdss";
reg = <0x1a00000 0x1000>,
<0x1ac8000 0x3000>;
@@ -161,8 +172,8 @@
#size-cells = <1>;
ranges;
- mdp@1a01000 {
- compatible = "qcom,mdp5";
+ display-controller@1a01000 {
+ compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
reg = <0x01a01000 0x89000>;
reg-names = "mdp_phys";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
index b02adba..8d3cd46 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Display DPU dt properties for MSM8998 target
+title: Qualcomm Display DPU on MSM8998
maintainers:
- AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
@@ -13,8 +13,7 @@
properties:
compatible:
- items:
- - const: qcom,msm8998-dpu
+ const: qcom,msm8998-dpu
reg:
items:
@@ -46,6 +45,13 @@
- const: core
- const: vsync
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
index cf52ff7..3c2b6ed 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
@@ -18,8 +18,7 @@
properties:
compatible:
- items:
- - const: qcom,msm8998-mdss
+ const: qcom,msm8998-mdss
clocks:
items:
@@ -47,7 +46,9 @@
type: object
properties:
compatible:
- const: qcom,mdss-dsi-ctrl
+ items:
+ - const: qcom,msm8998-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
"^phy@[0-9a-f]+$":
type: object
@@ -55,6 +56,9 @@
compatible:
const: qcom,dsi-phy-10nm-8998
+required:
+ - compatible
+
unevaluatedProperties: false
examples:
@@ -126,7 +130,7 @@
};
dsi@c994000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0c994000 0x400>;
reg-names = "dsi_ctrl";
@@ -196,7 +200,7 @@
};
dsi@c996000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0c996000 0x400>;
reg-names = "dsi_ctrl";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
index a7b382f..414f4e7 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Display DPU dt properties for QCM2290 target
+title: Qualcomm Display DPU on QCM2290
maintainers:
- Loic Poulain <loic.poulain@linaro.org>
@@ -13,8 +13,7 @@
properties:
compatible:
- items:
- - const: qcom,qcm2290-dpu
+ const: qcom,qcm2290-dpu
reg:
items:
@@ -42,6 +41,13 @@
- const: lut
- const: vsync
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
index 4795e13..2995b84 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -18,8 +18,7 @@
properties:
compatible:
- items:
- - const: qcom,qcm2290-mdss
+ const: qcom,qcm2290-mdss
clocks:
items:
@@ -61,6 +60,9 @@
compatible:
const: qcom,dsi-phy-14nm-2290
+required:
+ - compatible
+
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
index bd590a6..1fb8321 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Display DPU dt properties for SC7180 target
+title: Qualcomm Display DPU on SC7180
maintainers:
- Krishna Manikandan <quic_mkrishn@quicinc.com>
@@ -13,8 +13,7 @@
properties:
compatible:
- items:
- - const: qcom,sc7180-dpu
+ const: qcom,sc7180-dpu
reg:
items:
@@ -44,6 +43,13 @@
- const: core
- const: vsync
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
index 13e396d..42ef06e 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
@@ -18,8 +18,7 @@
properties:
compatible:
- items:
- - const: qcom,sc7180-mdss
+ const: qcom,sc7180-mdss
clocks:
items:
@@ -59,7 +58,9 @@
type: object
properties:
compatible:
- const: qcom,mdss-dsi-ctrl
+ items:
+ - const: qcom,sc7180-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
"^phy@[0-9a-f]+$":
type: object
@@ -67,6 +68,9 @@
compatible:
const: qcom,dsi-phy-10nm
+required:
+ - compatible
+
unevaluatedProperties: false
examples:
@@ -142,7 +146,7 @@
};
dsi@ae94000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0ae94000 0x400>;
reg-names = "dsi_ctrl";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
index 924059b..26dc073 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Display DPU dt properties for SC7280
+title: Qualcomm Display DPU on SC7280
maintainers:
- Krishna Manikandan <quic_mkrishn@quicinc.com>
@@ -43,6 +43,13 @@
- const: core
- const: vsync
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
index a3de174..078e1d1 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
@@ -58,7 +58,9 @@
type: object
properties:
compatible:
- const: qcom,mdss-dsi-ctrl
+ items:
+ - const: qcom,sc7280-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
"^edp@[0-9a-f]+$":
type: object
@@ -74,6 +76,9 @@
- qcom,sc7280-dsi-phy-7nm
- qcom,sc7280-edp-phy
+required:
+ - compatible
+
unevaluatedProperties: false
examples:
@@ -162,7 +167,7 @@
};
dsi@ae94000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,sc7280-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0ae94000 0x400>;
reg-names = "dsi_ctrl";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
new file mode 100644
index 0000000..f2c8e16
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Display Processing Unit
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Device tree bindings for SC8280XP Display Processing Unit.
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
new file mode 100644
index 0000000..c239544
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Mobile Display Subsystem
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sc8280xp-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - qcom,sc8280xp-dp
+ - qcom,sc8280xp-edp
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sc8280xp-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc0 MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
index 5719b45..0f7765d 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Display DPU dt properties for SDM845 target
+title: Qualcomm Display DPU on SDM845
maintainers:
- Krishna Manikandan <quic_mkrishn@quicinc.com>
@@ -13,8 +13,7 @@
properties:
compatible:
- items:
- - const: qcom,sdm845-dpu
+ const: qcom,sdm845-dpu
reg:
items:
@@ -42,6 +41,13 @@
- const: core
- const: vsync
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
index 31ca6f9..6ecb009 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
@@ -18,8 +18,7 @@
properties:
compatible:
- items:
- - const: qcom,sdm845-mdss
+ const: qcom,sdm845-mdss
clocks:
items:
@@ -47,11 +46,19 @@
compatible:
const: qcom,sdm845-dpu
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sdm845-dp
+
"^dsi@[0-9a-f]+$":
type: object
properties:
compatible:
- const: qcom,mdss-dsi-ctrl
+ items:
+ - const: qcom,sdm845-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
"^phy@[0-9a-f]+$":
type: object
@@ -59,6 +66,9 @@
compatible:
const: qcom,dsi-phy-10nm
+required:
+ - compatible
+
unevaluatedProperties: false
examples:
@@ -128,7 +138,7 @@
};
dsi@ae94000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0ae94000 0x400>;
reg-names = "dsi_ctrl";
@@ -198,7 +208,7 @@
};
dsi@ae96000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0ae96000 0x400>;
reg-names = "dsi_ctrl";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
index 4a39a30..bf62c2f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Display DPU dt properties for SM6115 target
+title: Qualcomm Display DPU on SM6115
maintainers:
- Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
@@ -13,8 +13,7 @@
properties:
compatible:
- items:
- - const: qcom,sm6115-dpu
+ const: qcom,sm6115-dpu
reg:
items:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
index 886858e..2491cb1 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -18,8 +18,7 @@
properties:
compatible:
- items:
- - const: qcom,sm6115-mdss
+ const: qcom,sm6115-mdss
clocks:
items:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml
new file mode 100644
index 0000000..2b3f3fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display DPU
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8150-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display ahb clock
+ - description: Display hf axi clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8150.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8150-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
new file mode 100644
index 0000000..5182e95
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -0,0 +1,332 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SM8150 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm8150-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8150-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8150-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8150.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8150-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x800 0x420>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8150-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-171428571 {
+ opp-hz = /bits/ 64 <171428571>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
index 9ff8a26..687c8c1 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -39,6 +39,13 @@
- const: core
- const: vsync
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
index 0d3be53..368d3db 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -18,8 +18,7 @@
properties:
compatible:
- items:
- - const: qcom,sm8250-mdss
+ const: qcom,sm8250-mdss
clocks:
items:
@@ -55,7 +54,9 @@
type: object
properties:
compatible:
- const: qcom,mdss-dsi-ctrl
+ items:
+ - const: qcom,sm8250-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
"^phy@[0-9a-f]+$":
type: object
@@ -63,6 +64,9 @@
compatible:
const: qcom,dsi-phy-7nm
+required:
+ - compatible
+
unevaluatedProperties: false
examples:
@@ -167,7 +171,7 @@
};
dsi@ae94000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0ae94000 0x400>;
reg-names = "dsi_ctrl";
@@ -257,7 +261,7 @@
};
dsi@ae96000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0ae96000 0x400>;
reg-names = "dsi_ctrl";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
new file mode 100644
index 0000000..1205003
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display DPU
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8350-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8350.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
new file mode 100644
index 0000000..4d94dbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display MDSS
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+description:
+ MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm8350-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8350-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8350-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-5nm-8350
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8350.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8350-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi0: dsi@ae94000 {
+ compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ phys = <&mdss_dsi0_phy>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
new file mode 100644
index 0000000..0d17ece
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 Display DPU
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8450-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi
+ - description: Display sf axi
+ - description: Display ahb
+ - description: Display lut
+ - description: Display core
+ - description: Display vsync
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8450.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8450-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8450_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-172000000{
+ opp-hz = /bits/ 64 <172000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
new file mode 100644
index 0000000..4c6929e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -0,0 +1,345 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ SM8450 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8450-mdss
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display sf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8450-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8450-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-5nm-8450
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8450.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8450-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
+ <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x2800 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8450-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8450_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-172000000{
+ opp-hz = /bits/ 64 <172000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8450_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
