blob: d7eee99b7e3fef12029d700f9550e6e0a96a3df7 [file] [log] [blame]
/*
* linux/arch/arm/mach-omap2/pm.c
*
* OMAP2 Power Management Routines
*
* Copyright (C) 2006 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2005 Texas Instruments, Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* Based on pm.c for omap1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/pm.h>
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/arch/pm.h>
#include "prcm-regs.h"
static struct clk *vclk;
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
static void (*saved_idle)(void);
extern void __init pmdomain_init(void);
extern void pmdomain_set_autoidle(void);
static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
void omap2_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
if (need_resched()) {
local_fiq_enable();
local_irq_enable();
return;
}
/*
* Since an interrupt may set up a timer, we don't want to
* reprogram the hardware timer with interrupts enabled.
* Re-enable interrupts only after returning from idle.
*/
timer_dyn_reprogram();
omap2_sram_idle();
local_fiq_enable();
local_irq_enable();
}
static int omap2_pm_prepare(suspend_state_t state)
{
int error = 0;
/* We cannot sleep in idle until we have resumed */
saved_idle = pm_idle;
pm_idle = NULL;
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
return error;
}
#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \
OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \
OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \
OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \
OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
static void omap2_pm_debug(char * desc)
{
printk("%s:\n", desc);
preg(CM_CLKSTCTRL_MPU);
preg(CM_CLKSTCTRL_CORE);
preg(CM_CLKSTCTRL_GFX);
preg(CM_CLKSTCTRL_DSP);
preg(CM_CLKSTCTRL_MDM);
preg(PM_PWSTCTRL_MPU);
preg(PM_PWSTCTRL_CORE);
preg(PM_PWSTCTRL_GFX);
preg(PM_PWSTCTRL_DSP);
preg(PM_PWSTCTRL_MDM);
preg(PM_PWSTST_MPU);
preg(PM_PWSTST_CORE);
preg(PM_PWSTST_GFX);
preg(PM_PWSTST_DSP);
preg(PM_PWSTST_MDM);
preg(CM_AUTOIDLE1_CORE);
preg(CM_AUTOIDLE2_CORE);
preg(CM_AUTOIDLE3_CORE);
preg(CM_AUTOIDLE4_CORE);
preg(CM_AUTOIDLE_WKUP);
preg(CM_AUTOIDLE_PLL);
preg(CM_AUTOIDLE_DSP);
preg(CM_AUTOIDLE_MDM);
preg(CM_ICLKEN1_CORE);
preg(CM_ICLKEN2_CORE);
preg(CM_ICLKEN3_CORE);
preg(CM_ICLKEN4_CORE);
preg(CM_ICLKEN_GFX);
preg(CM_ICLKEN_WKUP);
preg(CM_ICLKEN_DSP);
preg(CM_ICLKEN_MDM);
preg(CM_IDLEST1_CORE);
preg(CM_IDLEST2_CORE);
preg(CM_IDLEST3_CORE);
preg(CM_IDLEST4_CORE);
preg(CM_IDLEST_GFX);
preg(CM_IDLEST_WKUP);
preg(CM_IDLEST_CKGEN);
preg(CM_IDLEST_DSP);
preg(CM_IDLEST_MDM);
preg(RM_RSTST_MPU);
preg(RM_RSTST_GFX);
preg(RM_RSTST_WKUP);
preg(RM_RSTST_DSP);
preg(RM_RSTST_MDM);
preg(PM_WKDEP_MPU);
preg(PM_WKDEP_CORE);
preg(PM_WKDEP_GFX);
preg(PM_WKDEP_DSP);
preg(PM_WKDEP_MDM);
preg(CM_FCLKEN_WKUP);
preg(CM_ICLKEN_WKUP);
preg(CM_IDLEST_WKUP);
preg(CM_AUTOIDLE_WKUP);
preg(CM_CLKSEL_WKUP);
preg(PM_WKEN_WKUP);
preg(PM_WKST_WKUP);
}
static inline void omap2_pm_save_registers(void)
{
/* Save interrupt registers */
OMAP24XX_SAVE(INTC_MIR0);
OMAP24XX_SAVE(INTC_MIR1);
OMAP24XX_SAVE(INTC_MIR2);
/* Save power control registers */
OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
/* Save power state registers */
OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
/* Save autoidle registers */
OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
/* Save idle state registers */
OMAP24XX_SAVE(CM_IDLEST1_CORE);
OMAP24XX_SAVE(CM_IDLEST2_CORE);
OMAP24XX_SAVE(CM_IDLEST3_CORE);
OMAP24XX_SAVE(CM_IDLEST4_CORE);
OMAP24XX_SAVE(CM_IDLEST_GFX);
OMAP24XX_SAVE(CM_IDLEST_WKUP);
OMAP24XX_SAVE(CM_IDLEST_CKGEN);
OMAP24XX_SAVE(CM_IDLEST_DSP);
OMAP24XX_SAVE(CM_IDLEST_MDM);
/* Save clock registers */
OMAP24XX_SAVE(CM_FCLKEN1_CORE);
OMAP24XX_SAVE(CM_FCLKEN2_CORE);
OMAP24XX_SAVE(CM_ICLKEN1_CORE);
OMAP24XX_SAVE(CM_ICLKEN2_CORE);
OMAP24XX_SAVE(CM_ICLKEN3_CORE);
OMAP24XX_SAVE(CM_ICLKEN4_CORE);
}
static inline void omap2_pm_restore_registers(void)
{
/* Restore clock state registers */
OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
/* Restore power state registers */
OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
/* Restore idle state registers */
OMAP24XX_RESTORE(CM_IDLEST1_CORE);
OMAP24XX_RESTORE(CM_IDLEST2_CORE);
OMAP24XX_RESTORE(CM_IDLEST3_CORE);
OMAP24XX_RESTORE(CM_IDLEST4_CORE);
OMAP24XX_RESTORE(CM_IDLEST_GFX);
OMAP24XX_RESTORE(CM_IDLEST_WKUP);
OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
OMAP24XX_RESTORE(CM_IDLEST_DSP);
OMAP24XX_RESTORE(CM_IDLEST_MDM);
/* Restore autoidle registers */
OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
/* Restore clock registers */
OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
/* REVISIT: Clear interrupts here */
/* Restore interrupt registers */
OMAP24XX_RESTORE(INTC_MIR0);
OMAP24XX_RESTORE(INTC_MIR1);
OMAP24XX_RESTORE(INTC_MIR2);
}
static int omap2_pm_suspend(void)
{
int processor_type = 0;
/* REVISIT: 0x21 or 0x26? */
if (cpu_is_omap2420())
processor_type = 0x21;
if (!processor_type)
return -ENOTSUPP;
local_irq_disable();
local_fiq_disable();
omap2_pm_save_registers();
/* Disable interrupts except for the wake events */
INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
pmdomain_set_autoidle();
/* Clear old wake-up events */
PM_WKST1_CORE = 0;
PM_WKST2_CORE = 0;
PM_WKST_WKUP = 0;
/* Enable wake-up events */
PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */
PM_WKEN2_CORE = (1 << 2); /* UART3 */
PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */
/* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
* in the SRAM suspend code */
CM_FCLKEN1_CORE = 0;
CM_FCLKEN2_CORE = 0;
CM_ICLKEN1_CORE = 0;
CM_ICLKEN3_CORE = 0;
CM_ICLKEN4_CORE = 0;
omap2_pm_debug("Status before suspend");
/* Must wait for serial buffers to clear */
mdelay(200);
/* Jump to SRAM suspend code
* REVISIT: When is this SDRC_DLLB_CTRL?
*/
omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
/* Back from sleep */
omap2_pm_restore_registers();
local_fiq_enable();
local_irq_enable();
return 0;
}
static int omap2_pm_enter(suspend_state_t state)
{
int ret = 0;
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap2_pm_suspend();
break;
case PM_SUSPEND_DISK:
ret = -ENOTSUPP;
break;
default:
ret = -EINVAL;
}
return ret;
}
static int omap2_pm_finish(suspend_state_t state)
{
pm_idle = saved_idle;
return 0;
}
static struct pm_ops omap_pm_ops = {
.pm_disk_mode = 0,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
};
int __init omap2_pm_init(void)
{
printk("Power Management for TI OMAP.\n");
vclk = clk_get(NULL, "virt_prcm_set");
if (IS_ERR(vclk)) {
printk(KERN_ERR "Could not get PM vclk\n");
return -ENODEV;
}
/*
* We copy the assembler sleep/wakeup routines to SRAM.
* These routines need to be in SRAM as that's the only
* memory the MPU can see when it wakes up.
*/
omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
omap24xx_idle_loop_suspend_sz);
omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
omap24xx_cpu_suspend_sz);
pm_set_ops(&omap_pm_ops);
pm_idle = omap2_pm_idle;
pmdomain_init();
return 0;
}
__initcall(omap2_pm_init);