blob: 357e9daf94ae061dad439df9404f9898354d7930 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2017 SiFive
* Copyright (C) 2018 Christoph Hellwig
*/
#define pr_fmt(fmt) "plic: " fmt
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <asm/smp.h>
/*
* This driver implements a version of the RISC-V PLIC with the actual layout
* specified in chapter 8 of the SiFive U5 Coreplex Series Manual:
*
* https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf
*
* The largest number supported by devices marked as 'sifive,plic-1.0.0', is
* 1024, of which device 0 is defined as non-existent by the RISC-V Privileged
* Spec.
*/
#define MAX_DEVICES 1024
#define MAX_CONTEXTS 15872
/*
* Each interrupt source has a priority register associated with it.
* We always hardwire it to one in Linux.
*/
#define PRIORITY_BASE 0
#define PRIORITY_PER_ID 4
/*
* Each hart context has a vector of interrupt enable bits associated with it.
* There's one bit for each interrupt source.
*/
#define ENABLE_BASE 0x2000
#define ENABLE_PER_HART 0x80
/*
* Each hart context has a set of control registers associated with it. Right
* now there's only two: a source priority threshold over which the hart will
* take an interrupt, and a register to claim interrupts.
*/
#define CONTEXT_BASE 0x200000
#define CONTEXT_PER_HART 0x1000
#define CONTEXT_THRESHOLD 0x00
#define CONTEXT_CLAIM 0x04
static void __iomem *plic_regs;
struct plic_handler {
bool present;
int ctxid;
};
static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
static inline void __iomem *plic_hart_offset(int ctxid)
{
return plic_regs + CONTEXT_BASE + ctxid * CONTEXT_PER_HART;
}
static inline u32 __iomem *plic_enable_base(int ctxid)
{
return plic_regs + ENABLE_BASE + ctxid * ENABLE_PER_HART;
}
/*
* Protect mask operations on the registers given that we can't assume that
* atomic memory operations work on them.
*/
static DEFINE_RAW_SPINLOCK(plic_toggle_lock);
static inline void plic_toggle(int ctxid, int hwirq, int enable)
{
u32 __iomem *reg = plic_enable_base(ctxid) + (hwirq / 32);
u32 hwirq_mask = 1 << (hwirq % 32);
raw_spin_lock(&plic_toggle_lock);
if (enable)
writel(readl(reg) | hwirq_mask, reg);
else
writel(readl(reg) & ~hwirq_mask, reg);
raw_spin_unlock(&plic_toggle_lock);
}
static inline void plic_irq_toggle(struct irq_data *d, int enable)
{
int cpu;
writel(enable, plic_regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
for_each_cpu(cpu, irq_data_get_affinity_mask(d)) {
struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);
if (handler->present)
plic_toggle(handler->ctxid, d->hwirq, enable);
}
}
static void plic_irq_enable(struct irq_data *d)
{
plic_irq_toggle(d, 1);
}
static void plic_irq_disable(struct irq_data *d)
{
plic_irq_toggle(d, 0);
}
static struct irq_chip plic_chip = {
.name = "SiFive PLIC",
/*
* There is no need to mask/unmask PLIC interrupts. They are "masked"
* by reading claim and "unmasked" when writing it back.
*/
.irq_enable = plic_irq_enable,
.irq_disable = plic_irq_disable,
};
static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
irq_set_chip_and_handler(irq, &plic_chip, handle_simple_irq);
irq_set_chip_data(irq, NULL);
irq_set_noprobe(irq);
return 0;
}
static const struct irq_domain_ops plic_irqdomain_ops = {
.map = plic_irqdomain_map,
.xlate = irq_domain_xlate_onecell,
};
static struct irq_domain *plic_irqdomain;
/*
* Handling an interrupt is a two-step process: first you claim the interrupt
* by reading the claim register, then you complete the interrupt by writing
* that source ID back to the same claim register. This automatically enables
* and disables the interrupt, so there's nothing else to do.
*/
static void plic_handle_irq(struct pt_regs *regs)
{
struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
void __iomem *claim = plic_hart_offset(handler->ctxid) + CONTEXT_CLAIM;
irq_hw_number_t hwirq;
WARN_ON_ONCE(!handler->present);
csr_clear(sie, SIE_SEIE);
while ((hwirq = readl(claim))) {
int irq = irq_find_mapping(plic_irqdomain, hwirq);
if (unlikely(irq <= 0))
pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
hwirq);
else
generic_handle_irq(irq);
writel(hwirq, claim);
}
csr_set(sie, SIE_SEIE);
}
/*
* Walk up the DT tree until we find an active RISC-V core (HART) node and
* extract the cpuid from it.
*/
static int plic_find_hart_id(struct device_node *node)
{
for (; node; node = node->parent) {
if (of_device_is_compatible(node, "riscv"))
return riscv_of_processor_hartid(node);
}
return -1;
}
static int __init plic_init(struct device_node *node,
struct device_node *parent)
{
int error = 0, nr_handlers, nr_mapped = 0, i;
u32 nr_irqs;
if (plic_regs) {
pr_warn("PLIC already present.\n");
return -ENXIO;
}
plic_regs = of_iomap(node, 0);
if (WARN_ON(!plic_regs))
return -EIO;
error = -EINVAL;
of_property_read_u32(node, "riscv,ndev", &nr_irqs);
if (WARN_ON(!nr_irqs))
goto out_iounmap;
nr_handlers = of_irq_count(node);
if (WARN_ON(!nr_handlers))
goto out_iounmap;
if (WARN_ON(nr_handlers < num_possible_cpus()))
goto out_iounmap;
error = -ENOMEM;
plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
&plic_irqdomain_ops, NULL);
if (WARN_ON(!plic_irqdomain))
goto out_iounmap;
for (i = 0; i < nr_handlers; i++) {
struct of_phandle_args parent;
struct plic_handler *handler;
irq_hw_number_t hwirq;
int cpu, hartid;
if (of_irq_parse_one(node, i, &parent)) {
pr_err("failed to parse parent for context %d.\n", i);
continue;
}
/* skip context holes */
if (parent.args[0] == -1)
continue;
hartid = plic_find_hart_id(parent.np);
if (hartid < 0) {
pr_warn("failed to parse hart ID for context %d.\n", i);
continue;
}
cpu = riscv_hartid_to_cpuid(hartid);
handler = per_cpu_ptr(&plic_handlers, cpu);
handler->present = true;
handler->ctxid = i;
/* priority must be > threshold to trigger an interrupt */
writel(0, plic_hart_offset(i) + CONTEXT_THRESHOLD);
for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
plic_toggle(i, hwirq, 0);
nr_mapped++;
}
pr_info("mapped %d interrupts to %d (out of %d) handlers.\n",
nr_irqs, nr_mapped, nr_handlers);
set_handle_irq(plic_handle_irq);
return 0;
out_iounmap:
iounmap(plic_regs);
return error;
}
IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */