blob: c474981a6c0dd473627ac14ecd40430ded4d0f71 [file] [log] [blame]
/*
* Copyright 2003-2013 Broadcom Corporation.
* All Rights Reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the Broadcom
* license below:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/cpu.h>
#include <asm/cacheops.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
#include <asm/asmmacro.h>
#include <asm/addrspace.h>
#include <asm/netlogic/common.h>
#include <asm/netlogic/xlp-hal/iomap.h>
#include <asm/netlogic/xlp-hal/xlp.h>
#include <asm/netlogic/xlp-hal/sys.h>
#include <asm/netlogic/xlp-hal/cpucontrol.h>
#define SYS_CPU_COHERENT_BASE CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
XLP_IO_SYS_OFFSET(0) + XLP_IO_PCI_HDRSZ + \
SYS_CPU_NONCOHERENT_MODE * 4
/* Enable XLP features and workarounds in the LSU */
.macro xlp_config_lsu
li t0, LSU_DEFEATURE
mfcr t1, t0
lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */
or t1, t1, t2
mtcr t1, t0
li t0, ICU_DEFEATURE
mfcr t1, t0
ori t1, 0x1000 /* Enable Icache partitioning */
mtcr t1, t0
li t0, SCHED_DEFEATURE
lui t1, 0x0100 /* Disable BRU accepting ALU ops */
mtcr t1, t0
.endm
/*
* Allow access to physical mem >64G by enabling ELPA in PAGEGRAIN
* register. This is needed before going to C code since the SP can
* in this region. Called from all HW threads.
*/
.macro xlp_early_mmu_init
mfc0 t0, CP0_PAGEMASK, 1
li t1, (1 << 29) /* ELPA bit */
or t0, t1
mtc0 t0, CP0_PAGEMASK, 1
.endm
/*
* L1D cache has to be flushed before enabling threads in XLP.
* On XLP8xx/XLP3xx, we do a low level flush using processor control
* registers. On XLPII CPUs, usual cache instructions work.
*/
.macro xlp_flush_l1_dcache
mfc0 t0, CP0_PRID
andi t0, t0, PRID_IMP_MASK
slt t1, t0, 0x1200
beqz t1, 15f
nop
/* XLP8xx low level cache flush */
li t0, LSU_DEBUG_DATA0
li t1, LSU_DEBUG_ADDR
li t2, 0 /* index */
li t3, 0x1000 /* loop count */
11:
sll v0, t2, 5
mtcr zero, t0
ori v1, v0, 0x3 /* way0 | write_enable | write_active */
mtcr v1, t1
12:
mfcr v1, t1
andi v1, 0x1 /* wait for write_active == 0 */
bnez v1, 12b
nop
mtcr zero, t0
ori v1, v0, 0x7 /* way1 | write_enable | write_active */
mtcr v1, t1
13:
mfcr v1, t1
andi v1, 0x1 /* wait for write_active == 0 */
bnez v1, 13b
nop
addi t2, 1
bne t3, t2, 11b
nop
b 17f
nop
/* XLPII CPUs, Invalidate all 64k of L1 D-cache */
15:
li t0, 0x80000000
li t1, 0x80010000
16: cache Index_Writeback_Inv_D, 0(t0)
addiu t0, t0, 32
bne t0, t1, 16b
nop
17:
.endm
/*
* nlm_reset_entry will be copied to the reset entry point for
* XLR and XLP. The XLP cores start here when they are woken up. This
* is also the NMI entry point.
*
* We use scratch reg 6/7 to save k0/k1 and check for NMI first.
*
* The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
* location, this will have the thread mask (used when core is woken up)
* and the current NMI handler in case we reached here for an NMI.
*
* When a core or thread is newly woken up, it marks itself ready and
* loops in a 'wait'. When the CPU really needs waking up, we send an NMI
* IPI to it, with the NMI handler set to prom_boot_secondary_cpus
*/
.set noreorder
.set noat
.set arch=xlr /* for mfcr/mtcr, XLR is sufficient */
FEXPORT(nlm_reset_entry)
dmtc0 k0, $22, 6
dmtc0 k1, $22, 7
mfc0 k0, CP0_STATUS
li k1, 0x80000
and k1, k0, k1
beqz k1, 1f /* go to real reset entry */
nop
li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
ld k0, BOOT_NMI_HANDLER(k1)
jr k0
nop
1: /* Entry point on core wakeup */
mfc0 t0, CP0_PRID /* processor ID */
andi t0, PRID_IMP_MASK
li t1, 0x1500 /* XLP 9xx */
beq t0, t1, 2f /* does not need to set coherent */
nop
li t1, 0x1300 /* XLP 5xx */
beq t0, t1, 2f /* does not need to set coherent */
nop
/* set bit in SYS coherent register for the core */
mfc0 t0, CP0_EBASE
mfc0 t1, CP0_EBASE
srl t1, 5
andi t1, 0x3 /* t1 <- node */
li t2, 0x40000
mul t3, t2, t1 /* t3 = node * 0x40000 */
srl t0, t0, 2
and t0, t0, 0x7 /* t0 <- core */
li t1, 0x1
sll t0, t1, t0
nor t0, t0, zero /* t0 <- ~(1 << core) */
li t2, SYS_CPU_COHERENT_BASE
add t2, t2, t3 /* t2 <- SYS offset for node */
lw t1, 0(t2)
and t1, t1, t0
sw t1, 0(t2)
/* read back to ensure complete */
lw t1, 0(t2)
sync
2:
/* Configure LSU on Non-0 Cores. */
xlp_config_lsu
/* FALL THROUGH */
/*
* Wake up sibling threads from the initial thread in a core.
*/
EXPORT(nlm_boot_siblings)
/* core L1D flush before enable threads */
xlp_flush_l1_dcache
/* save ra and sp, will be used later (only for boot cpu) */
dmtc0 ra, $22, 6
dmtc0 sp, $22, 7
/* Enable hw threads by writing to MAP_THREADMODE of the core */
li t0, CKSEG1ADDR(RESET_DATA_PHYS)
lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
mfcr t2, t0
or t2, t2, t1
mtcr t2, t0
/*
* The new hardware thread starts at the next instruction
* For all the cases other than core 0 thread 0, we will
* jump to the secondary wait function.
* NOTE: All GPR contents are lost after the mtcr above!
*/
mfc0 v0, CP0_EBASE
andi v0, 0x3ff /* v0 <- node/core */
/*
* Errata: to avoid potential live lock, setup IFU_BRUB_RESERVE
* when running 4 threads per core
*/
andi v1, v0, 0x3 /* v1 <- thread id */
bnez v1, 2f
nop
/* thread 0 of each core. */
li t0, CKSEG1ADDR(RESET_DATA_PHYS)
lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
subu t1, 0x3 /* 4-thread per core mode? */
bnez t1, 2f
nop
li t0, IFU_BRUB_RESERVE
li t1, 0x55
mtcr t1, t0
_ehb
2:
beqz v0, 4f /* boot cpu (cpuid == 0)? */
nop
/* setup status reg */
move t1, zero
#ifdef CONFIG_64BIT
ori t1, ST0_KX
#endif
mtc0 t1, CP0_STATUS
xlp_early_mmu_init
/* mark CPU ready */
li t3, CKSEG1ADDR(RESET_DATA_PHYS)
ADDIU t1, t3, BOOT_CPU_READY
sll v1, v0, 2
PTR_ADDU t1, v1
li t2, 1
sw t2, 0(t1)
/* Wait until NMI hits */
3: wait
b 3b
nop
/*
* For the boot CPU, we have to restore ra and sp and return, rest
* of the registers will be restored by the caller
*/
4:
dmfc0 ra, $22, 6
dmfc0 sp, $22, 7
jr ra
nop
EXPORT(nlm_reset_entry_end)
LEAF(nlm_init_boot_cpu)
#ifdef CONFIG_CPU_XLP
xlp_config_lsu
xlp_early_mmu_init
#endif
jr ra
nop
END(nlm_init_boot_cpu)