| /* | |
| * Copyright (c) 2006,2007 Daniel Mack, Tim Ruetz | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/input.h> | |
| #include <linux/usb.h> | |
| #include <linux/spinlock.h> | |
| #include <sound/driver.h> | |
| #include <sound/core.h> | |
| #include <sound/rawmidi.h> | |
| #include <sound/pcm.h> | |
| #include "caiaq-device.h" | |
| #include "caiaq-input.h" | |
| #ifdef CONFIG_SND_USB_CAIAQ_INPUT | |
| static unsigned char keycode_ak1[] = { KEY_C, KEY_B, KEY_A }; | |
| static unsigned char keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4, | |
| KEY_5, KEY_6, KEY_7 }; | |
| #define DEG90 (range/2) | |
| #define DEG180 (range) | |
| #define DEG270 (DEG90 + DEG180) | |
| #define DEG360 (DEG180 * 2) | |
| #define HIGH_PEAK (268) | |
| #define LOW_PEAK (-7) | |
| /* some of these devices have endless rotation potentiometers | |
| * built in which use two tapers, 90 degrees phase shifted. | |
| * this algorithm decodes them to one single value, ranging | |
| * from 0 to 999 */ | |
| static unsigned int decode_erp(unsigned char a, unsigned char b) | |
| { | |
| int weight_a, weight_b; | |
| int pos_a, pos_b; | |
| int ret; | |
| int range = HIGH_PEAK - LOW_PEAK; | |
| int mid_value = (HIGH_PEAK + LOW_PEAK) / 2; | |
| weight_b = abs(mid_value-a) - (range/2 - 100)/2; | |
| if (weight_b < 0) | |
| weight_b = 0; | |
| if (weight_b > 100) | |
| weight_b = 100; | |
| weight_a = 100 - weight_b; | |
| if (a < mid_value) { | |
| /* 0..90 and 270..360 degrees */ | |
| pos_b = b - LOW_PEAK + DEG270; | |
| if (pos_b >= DEG360) | |
| pos_b -= DEG360; | |
| } else | |
| /* 90..270 degrees */ | |
| pos_b = HIGH_PEAK - b + DEG90; | |
| if (b > mid_value) | |
| /* 0..180 degrees */ | |
| pos_a = a - LOW_PEAK; | |
| else | |
| /* 180..360 degrees */ | |
| pos_a = HIGH_PEAK - a + DEG180; | |
| /* interpolate both slider values, depending on weight factors */ | |
| /* 0..99 x DEG360 */ | |
| ret = pos_a * weight_a + pos_b * weight_b; | |
| /* normalize to 0..999 */ | |
| ret *= 10; | |
| ret /= DEG360; | |
| if (ret < 0) | |
| ret += 1000; | |
| if (ret >= 1000) | |
| ret -= 1000; | |
| return ret; | |
| } | |
| #undef DEG90 | |
| #undef DEG180 | |
| #undef DEG270 | |
| #undef DEG360 | |
| #undef HIGH_PEAK | |
| #undef LOW_PEAK | |
| static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *dev, | |
| const char *buf, unsigned int len) | |
| { | |
| switch(dev->input_dev->id.product) { | |
| case USB_PID_RIGKONTROL2: | |
| input_report_abs(dev->input_dev, ABS_X, (buf[4] << 8) |buf[5]); | |
| input_report_abs(dev->input_dev, ABS_Y, (buf[0] << 8) |buf[1]); | |
| input_report_abs(dev->input_dev, ABS_Z, (buf[2] << 8) |buf[3]); | |
| input_sync(dev->input_dev); | |
| break; | |
| } | |
| } | |
| static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev, | |
| const char *buf, unsigned int len) | |
| { | |
| int i; | |
| switch(dev->input_dev->id.product) { | |
| case USB_PID_AK1: | |
| i = decode_erp(buf[0], buf[1]); | |
| input_report_abs(dev->input_dev, ABS_X, i); | |
| input_sync(dev->input_dev); | |
| break; | |
| } | |
| } | |
| static void snd_caiaq_input_read_io(struct snd_usb_caiaqdev *dev, | |
| char *buf, unsigned int len) | |
| { | |
| int i; | |
| unsigned char *keycode = dev->input_dev->keycode; | |
| if (!keycode) | |
| return; | |
| if (dev->input_dev->id.product == USB_PID_RIGKONTROL2) | |
| for (i=0; i<len; i++) | |
| buf[i] = ~buf[i]; | |
| for (i=0; (i<dev->input_dev->keycodemax) && (i < len); i++) | |
| input_report_key(dev->input_dev, keycode[i], | |
| buf[i/8] & (1 << (i%8))); | |
| input_sync(dev->input_dev); | |
| } | |
| void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, | |
| char *buf, | |
| unsigned int len) | |
| { | |
| if (!dev->input_dev || (len < 1)) | |
| return; | |
| switch (buf[0]) { | |
| case EP1_CMD_READ_ANALOG: | |
| snd_caiaq_input_read_analog(dev, buf+1, len-1); | |
| break; | |
| case EP1_CMD_READ_ERP: | |
| snd_caiaq_input_read_erp(dev, buf+1, len-1); | |
| break; | |
| case EP1_CMD_READ_IO: | |
| snd_caiaq_input_read_io(dev, buf+1, len-1); | |
| break; | |
| } | |
| } | |
| int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev) | |
| { | |
| struct usb_device *usb_dev = dev->chip.dev; | |
| struct input_dev *input; | |
| int i, ret; | |
| input = input_allocate_device(); | |
| if (!input) | |
| return -ENOMEM; | |
| input->name = dev->product_name; | |
| input->id.bustype = BUS_USB; | |
| input->id.vendor = usb_dev->descriptor.idVendor; | |
| input->id.product = usb_dev->descriptor.idProduct; | |
| input->id.version = usb_dev->descriptor.bcdDevice; | |
| switch (dev->chip.usb_id) { | |
| case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): | |
| input->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); | |
| input->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_Z); | |
| input->keycode = keycode_rk2; | |
| input->keycodesize = sizeof(char); | |
| input->keycodemax = ARRAY_SIZE(keycode_rk2); | |
| for (i=0; i<ARRAY_SIZE(keycode_rk2); i++) | |
| set_bit(keycode_rk2[i], input->keybit); | |
| input_set_abs_params(input, ABS_X, 0, 4096, 0, 10); | |
| input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10); | |
| input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10); | |
| snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0); | |
| break; | |
| case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): | |
| input->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); | |
| input->absbit[0] = BIT(ABS_X); | |
| input->keycode = keycode_ak1; | |
| input->keycodesize = sizeof(char); | |
| input->keycodemax = ARRAY_SIZE(keycode_ak1); | |
| for (i=0; i<ARRAY_SIZE(keycode_ak1); i++) | |
| set_bit(keycode_ak1[i], input->keybit); | |
| input_set_abs_params(input, ABS_X, 0, 999, 0, 10); | |
| snd_usb_caiaq_set_auto_msg(dev, 1, 0, 5); | |
| break; | |
| default: | |
| /* no input methods supported on this device */ | |
| input_free_device(input); | |
| return 0; | |
| } | |
| ret = input_register_device(input); | |
| if (ret < 0) { | |
| input_free_device(input); | |
| return ret; | |
| } | |
| dev->input_dev = input; | |
| return 0; | |
| } | |
| void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev) | |
| { | |
| if (!dev || !dev->input_dev) | |
| return; | |
| input_unregister_device(dev->input_dev); | |
| input_free_device(dev->input_dev); | |
| dev->input_dev = NULL; | |
| } | |
| #endif /* CONFIG_SND_USB_CAIAQ_INPUT */ | |