patches.baytrail/0112-drm-i915-s-TRANSCONF-PCH_TRANSCONF.patch

From 1e81b3c7c04b4627e19632c54a6b309d11321d3a Mon Sep 17 00:00:00 2001
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri, 3 May 2013 11:49:46 +0200
Subject: drm/i915: s/TRANSCONF/PCH_TRANSCONF/

Every time I read hsw code I get completely confused about this. So
call it what it is more explicitly.

Also, add an LPT_TRANSCONF for the pch transcoder A and use it in
lpt-only code, to really unconfuse me.

v2: s/plane/pipe/ in the TRANSCONF #define (Paulo).

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit ab9412ba06484cdfd82bdb748689024efe2221fe)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |    7 ++++---
 drivers/gpu/drm/i915/i915_ums.c      |    8 ++++----
 drivers/gpu/drm/i915/intel_display.c |   30 +++++++++++++++---------------
 3 files changed, 23 insertions(+), 22 deletions(-)

--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4066,9 +4066,10 @@
 #define TRANSDPLINK_M2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_M2, _TRANSB_DP_LINK_M2)
 #define TRANSDPLINK_N2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_N2, _TRANSB_DP_LINK_N2)
 
-#define _TRANSACONF              0xf0008
-#define _TRANSBCONF              0xf1008
-#define TRANSCONF(plane) _PIPE(plane, _TRANSACONF, _TRANSBCONF)
+#define _PCH_TRANSACONF              0xf0008
+#define _PCH_TRANSBCONF              0xf1008
+#define PCH_TRANSCONF(pipe) _PIPE(pipe, _PCH_TRANSACONF, _PCH_TRANSBCONF)
+#define LPT_TRANSCONF		_PCH_TRANSACONF /* lpt has only one transcoder */
 #define  TRANS_DISABLE          (0<<31)
 #define  TRANS_ENABLE           (1<<31)
 #define  TRANS_STATE_MASK       (1<<30)
--- a/drivers/gpu/drm/i915/i915_ums.c
+++ b/drivers/gpu/drm/i915/i915_ums.c
@@ -148,7 +148,7 @@ void i915_save_display_reg(struct drm_de
 		dev_priv->regfile.savePFA_WIN_SZ = I915_READ(_PFA_WIN_SZ);
 		dev_priv->regfile.savePFA_WIN_POS = I915_READ(_PFA_WIN_POS);
 
-		dev_priv->regfile.saveTRANSACONF = I915_READ(_TRANSACONF);
+		dev_priv->regfile.saveTRANSACONF = I915_READ(_PCH_TRANSACONF);
 		dev_priv->regfile.saveTRANS_HTOTAL_A = I915_READ(_TRANS_HTOTAL_A);
 		dev_priv->regfile.saveTRANS_HBLANK_A = I915_READ(_TRANS_HBLANK_A);
 		dev_priv->regfile.saveTRANS_HSYNC_A = I915_READ(_TRANS_HSYNC_A);
@@ -205,7 +205,7 @@ void i915_save_display_reg(struct drm_de
 		dev_priv->regfile.savePFB_WIN_SZ = I915_READ(_PFB_WIN_SZ);
 		dev_priv->regfile.savePFB_WIN_POS = I915_READ(_PFB_WIN_POS);
 
-		dev_priv->regfile.saveTRANSBCONF = I915_READ(_TRANSBCONF);
+		dev_priv->regfile.saveTRANSBCONF = I915_READ(_PCH_TRANSBCONF);
 		dev_priv->regfile.saveTRANS_HTOTAL_B = I915_READ(_TRANS_HTOTAL_B);
 		dev_priv->regfile.saveTRANS_HBLANK_B = I915_READ(_TRANS_HBLANK_B);
 		dev_priv->regfile.saveTRANS_HSYNC_B = I915_READ(_TRANS_HSYNC_B);
@@ -379,7 +379,7 @@ void i915_restore_display_reg(struct drm
 		I915_WRITE(_PFA_WIN_SZ, dev_priv->regfile.savePFA_WIN_SZ);
 		I915_WRITE(_PFA_WIN_POS, dev_priv->regfile.savePFA_WIN_POS);
 
-		I915_WRITE(_TRANSACONF, dev_priv->regfile.saveTRANSACONF);
+		I915_WRITE(_PCH_TRANSACONF, dev_priv->regfile.saveTRANSACONF);
 		I915_WRITE(_TRANS_HTOTAL_A, dev_priv->regfile.saveTRANS_HTOTAL_A);
 		I915_WRITE(_TRANS_HBLANK_A, dev_priv->regfile.saveTRANS_HBLANK_A);
 		I915_WRITE(_TRANS_HSYNC_A, dev_priv->regfile.saveTRANS_HSYNC_A);
@@ -448,7 +448,7 @@ void i915_restore_display_reg(struct drm
 		I915_WRITE(_PFB_WIN_SZ, dev_priv->regfile.savePFB_WIN_SZ);
 		I915_WRITE(_PFB_WIN_POS, dev_priv->regfile.savePFB_WIN_POS);
 
-		I915_WRITE(_TRANSBCONF, dev_priv->regfile.saveTRANSBCONF);
+		I915_WRITE(_PCH_TRANSBCONF, dev_priv->regfile.saveTRANSBCONF);
 		I915_WRITE(_TRANS_HTOTAL_B, dev_priv->regfile.saveTRANS_HTOTAL_B);
 		I915_WRITE(_TRANS_HBLANK_B, dev_priv->regfile.saveTRANS_HBLANK_B);
 		I915_WRITE(_TRANS_HSYNC_B, dev_priv->regfile.saveTRANS_HSYNC_B);
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1206,14 +1206,14 @@ static void assert_pch_refclk_enabled(st
 	WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
 }
 
-static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
-				       enum pipe pipe)
+static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
+					   enum pipe pipe)
 {
 	int reg;
 	u32 val;
 	bool enabled;
 
-	reg = TRANSCONF(pipe);
+	reg = PCH_TRANSCONF(pipe);
 	val = I915_READ(reg);
 	enabled = !!(val & TRANS_ENABLE);
 	WARN(enabled,
@@ -1565,7 +1565,7 @@ static void intel_disable_pch_pll(struct
 	DRM_DEBUG_KMS("disabling PCH PLL %x\n", pll->pll_reg);
 
 	/* Make sure transcoder isn't still depending on us */
-	assert_transcoder_disabled(dev_priv, intel_crtc->pipe);
+	assert_pch_transcoder_disabled(dev_priv, intel_crtc->pipe);
 
 	reg = pll->pll_reg;
 	val = I915_READ(reg);
@@ -1605,7 +1605,7 @@ static void ironlake_enable_pch_transcod
 		I915_WRITE(reg, val);
 	}
 
-	reg = TRANSCONF(pipe);
+	reg = PCH_TRANSCONF(pipe);
 	val = I915_READ(reg);
 	pipeconf_val = I915_READ(PIPECONF(pipe));
 
@@ -1659,8 +1659,8 @@ static void lpt_enable_pch_transcoder(st
 	else
 		val |= TRANS_PROGRESSIVE;
 
-	I915_WRITE(TRANSCONF(TRANSCODER_A), val);
-	if (wait_for(I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE, 100))
+	I915_WRITE(LPT_TRANSCONF, val);
+	if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
 		DRM_ERROR("Failed to enable PCH transcoder\n");
 }
 
@@ -1677,7 +1677,7 @@ static void ironlake_disable_pch_transco
 	/* Ports must be off as well */
 	assert_pch_ports_disabled(dev_priv, pipe);
 
-	reg = TRANSCONF(pipe);
+	reg = PCH_TRANSCONF(pipe);
 	val = I915_READ(reg);
 	val &= ~TRANS_ENABLE;
 	I915_WRITE(reg, val);
@@ -1698,11 +1698,11 @@ static void lpt_disable_pch_transcoder(s
 {
 	u32 val;
 
-	val = I915_READ(_TRANSACONF);
+	val = I915_READ(LPT_TRANSCONF);
 	val &= ~TRANS_ENABLE;
-	I915_WRITE(_TRANSACONF, val);
+	I915_WRITE(LPT_TRANSCONF, val);
 	/* wait for PCH transcoder off, transcoder state */
-	if (wait_for((I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE) == 0, 50))
+	if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
 		DRM_ERROR("Failed to disable PCH transcoder\n");
 
 	/* Workaround: clear timing override bit. */
@@ -3011,7 +3011,7 @@ static void ironlake_pch_enable(struct d
 	int pipe = intel_crtc->pipe;
 	u32 reg, temp;
 
-	assert_transcoder_disabled(dev_priv, pipe);
+	assert_pch_transcoder_disabled(dev_priv, pipe);
 
 	/* Write the TU size bits before fdi link training, so that error
 	 * detection works. */
@@ -3115,7 +3115,7 @@ static void lpt_pch_enable(struct drm_cr
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
 
-	assert_transcoder_disabled(dev_priv, TRANSCODER_A);
+	assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
 
 	lpt_program_iclkip(crtc);
 
@@ -5906,7 +5906,7 @@ static bool ironlake_get_pipe_config(str
 	if (!(tmp & PIPECONF_ENABLE))
 		return false;
 
-	if (I915_READ(TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
+	if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
 		pipe_config->has_pch_encoder = true;
 
 		tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
@@ -6054,7 +6054,7 @@ static bool haswell_get_pipe_config(stru
 	 */
 	tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
 	if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
-	    I915_READ(TRANSCONF(PIPE_A)) & TRANS_ENABLE) {
+	    I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
 		pipe_config->has_pch_encoder = true;
 
 		tmp = I915_READ(FDI_RX_CTL(PIPE_A));