blob: 85782446475100ec71fbeb9e1c6865017fab7192 [file] [log] [blame]
From c287947be1b0a603ce25bef17b88e23f98673334 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Thu, 27 Jun 2013 00:39:25 +0300
Subject: drm/i915: get mode clock when reading the pipe config v9
We need this for comparing modes between configuration changes.
The tricky part is to allow us to reuse the new get_clock stuff to
recover the lvds clock on gen2/3 when neither the vbt has an lvds mode
nor the panel a (useful) EDID.
v2: try harder to calulate non-simple pixel clocks (Daniel)
call get_clock after getting the encoder config, needed for pixel multiply
(Jesse)
v3: drop get_clock now that the pixel_multiply has been moved into
get_pipe_config
v4: re-add get_clock; we need to get the pixel multiplier in the
encoder, so need to calculate the clock value after the encoder's
get_config is called
v5: drop hsw clock_get, still needs to be written
v6: add fuzzy clock check (Daniel)
v7: wrap fuzzy clock check under !IS_HASWELL
use port_clock field rather than a new CPU eDP clock field in crtc_config
v8: remove stale pixel_multiplier sets (Daniel)
multiply by pixel_multiplier in 9xx clock get too (Daniel)
v9: make sure we set pixel_multiplier before calling clock_get from mode_get
for LVDS (Daniel)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Add some explanation to the commit message about why we have
to jump through a few hoops. Also remove the rebase-fail hunk from
intel_sdvo.c]
[danvet: Squash in the fixup from Jesse to also call ->get_clock in
the modeset state checker.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit f1f644dc66cbaf5a4c7dcde683361536b41885b9)
(cherry picked from drm-intel-next-queued)
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Conflicts:
drivers/gpu/drm/i915/intel_display.c
(context changes)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 1
drivers/gpu/drm/i915/intel_display.c | 126 +++++++++++++++++++++++++++++++----
drivers/gpu/drm/i915/intel_dp.c | 7 +
3 files changed, 123 insertions(+), 11 deletions(-)
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -367,6 +367,7 @@ struct drm_i915_display_funcs {
* fills out the pipe-config with the hw state. */
bool (*get_pipe_config)(struct intel_crtc *,
struct intel_crtc_config *);
+ void (*get_clock)(struct intel_crtc *, struct intel_crtc_config *);
int (*crtc_mode_set)(struct drm_crtc *crtc,
int x, int y,
struct drm_framebuffer *old_fb);
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -45,6 +45,11 @@ bool intel_pipe_has_type(struct drm_crtc
static void intel_increase_pllclock(struct drm_crtc *crtc);
static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
+static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config);
+static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config);
+
typedef struct {
int min, max;
} intel_range_t;
@@ -6854,11 +6859,12 @@ void intel_release_load_detect_pipe(stru
}
/* Returns the clock of the currently programmed mode of the given pipe. */
-static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
+static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
{
+ struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
+ int pipe = pipe_config->cpu_transcoder;
u32 dpll = I915_READ(DPLL(pipe));
u32 fp;
intel_clock_t clock;
@@ -6897,7 +6903,8 @@ static int intel_crtc_clock_get(struct d
default:
DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
"mode\n", (int)(dpll & DPLL_MODE_MASK));
- return 0;
+ pipe_config->adjusted_mode.clock = 0;
+ return;
}
if (IS_PINEVIEW(dev))
@@ -6934,12 +6941,55 @@ static int intel_crtc_clock_get(struct d
}
}
- /* XXX: It would be nice to validate the clocks, but we can't reuse
- * i830PllIsValid() because it relies on the xf86_config connector
- * configuration being accurate, which it isn't necessarily.
+ pipe_config->adjusted_mode.clock = clock.dot *
+ pipe_config->pixel_multiplier;
+}
+
+static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
+ int link_freq, repeat;
+ u64 clock;
+ u32 link_m, link_n;
+
+ repeat = pipe_config->pixel_multiplier;
+
+ /*
+ * The calculation for the data clock is:
+ * pixel_clock = ((m/n)*(link_clock * nr_lanes * repeat))/bpp
+ * But we want to avoid losing precison if possible, so:
+ * pixel_clock = ((m * link_clock * nr_lanes * repeat)/(n*bpp))
+ *
+ * and the link clock is simpler:
+ * link_clock = (m * link_clock * repeat) / n
+ */
+
+ /*
+ * We need to get the FDI or DP link clock here to derive
+ * the M/N dividers.
+ *
+ * For FDI, we read it from the BIOS or use a fixed 2.7GHz.
+ * For DP, it's either 1.62GHz or 2.7GHz.
+ * We do our calculations in 10*MHz since we don't need much precison.
*/
+ if (pipe_config->has_pch_encoder)
+ link_freq = intel_fdi_link_freq(dev) * 10000;
+ else
+ link_freq = pipe_config->port_clock;
+
+ link_m = I915_READ(PIPE_LINK_M1(cpu_transcoder));
+ link_n = I915_READ(PIPE_LINK_N1(cpu_transcoder));
+
+ if (!link_m || !link_n)
+ return;
+
+ clock = ((u64)link_m * (u64)link_freq * (u64)repeat);
+ do_div(clock, link_n);
- return clock.dot;
+ pipe_config->adjusted_mode.clock = clock;
}
/** Returns the currently programmed mode of the given pipe. */
@@ -6950,6 +7000,7 @@ struct drm_display_mode *intel_crtc_mode
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
struct drm_display_mode *mode;
+ struct intel_crtc_config pipe_config;
int htot = I915_READ(HTOTAL(cpu_transcoder));
int hsync = I915_READ(HSYNC(cpu_transcoder));
int vtot = I915_READ(VTOTAL(cpu_transcoder));
@@ -6959,7 +7010,18 @@ struct drm_display_mode *intel_crtc_mode
if (!mode)
return NULL;
- mode->clock = intel_crtc_clock_get(dev, crtc);
+ /*
+ * Construct a pipe_config sufficient for getting the clock info
+ * back out of crtc_clock_get.
+ *
+ * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
+ * to use a real value here instead.
+ */
+ pipe_config.cpu_transcoder = intel_crtc->pipe;
+ pipe_config.pixel_multiplier = 1;
+ i9xx_crtc_clock_get(intel_crtc, &pipe_config);
+
+ mode->clock = pipe_config.adjusted_mode.clock;
mode->hdisplay = (htot & 0xffff) + 1;
mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
mode->hsync_start = (hsync & 0xffff) + 1;
@@ -8020,6 +8082,28 @@ intel_modeset_update_state(struct drm_de
}
+static bool intel_fuzzy_clock_check(struct intel_crtc_config *cur,
+ struct intel_crtc_config *new)
+{
+ int clock1, clock2, diff;
+
+ clock1 = cur->adjusted_mode.clock;
+ clock2 = new->adjusted_mode.clock;
+
+ if (clock1 == clock2)
+ return true;
+
+ if (!clock1 || !clock2)
+ return false;
+
+ diff = abs(clock1 - clock2);
+
+ if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
+ return true;
+
+ return false;
+}
+
#define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
list_for_each_entry((intel_crtc), \
&(dev)->mode_config.crtc_list, \
@@ -8125,6 +8209,15 @@ intel_pipe_config_compare(struct drm_dev
#undef PIPE_CONF_CHECK_FLAGS
#undef PIPE_CONF_QUIRK
+ if (!IS_HASWELL(dev)) {
+ if (!intel_fuzzy_clock_check(current_config, pipe_config)) {
+ DRM_ERROR("mismatch in clock (expected %d, found %d\n",
+ current_config->adjusted_mode.clock,
+ pipe_config->adjusted_mode.clock);
+ return false;
+ }
+ }
+
return true;
}
@@ -8252,8 +8345,12 @@ check_crtc_state(struct drm_device *dev)
if (encoder->base.crtc != &crtc->base)
continue;
if (encoder->get_config &&
- encoder->get_hw_state(encoder, &pipe))
+ encoder->get_hw_state(encoder, &pipe) &&
+ dev_priv->display.get_clock) {
encoder->get_config(encoder, &pipe_config);
+ dev_priv->display.get_clock(crtc,
+ &pipe_config);
+ }
}
WARN(crtc->active != active,
@@ -9261,6 +9358,7 @@ static void intel_init_display(struct dr
dev_priv->display.update_plane = ironlake_update_plane;
} else if (HAS_PCH_SPLIT(dev)) {
dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
+ dev_priv->display.get_clock = ironlake_crtc_clock_get;
dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
dev_priv->display.crtc_enable = ironlake_crtc_enable;
dev_priv->display.crtc_disable = ironlake_crtc_disable;
@@ -9268,6 +9366,7 @@ static void intel_init_display(struct dr
dev_priv->display.update_plane = ironlake_update_plane;
} else if (IS_VALLEYVIEW(dev)) {
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
+ dev_priv->display.get_clock = i9xx_crtc_clock_get;
dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
dev_priv->display.crtc_enable = valleyview_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
@@ -9275,6 +9374,7 @@ static void intel_init_display(struct dr
dev_priv->display.update_plane = i9xx_update_plane;
} else {
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
+ dev_priv->display.get_clock = i9xx_crtc_clock_get;
dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
@@ -9839,8 +9939,12 @@ static void intel_modeset_readout_hw_sta
if (encoder->get_hw_state(encoder, &pipe)) {
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
encoder->base.crtc = &crtc->base;
- if (encoder->get_config)
+ if (encoder->get_config &&
+ dev_priv->display.get_clock) {
encoder->get_config(encoder, &crtc->config);
+ dev_priv->display.get_clock(crtc,
+ &crtc->config);
+ }
} else {
encoder->base.crtc = NULL;
}
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1371,6 +1371,13 @@ static void intel_dp_get_config(struct i
}
pipe_config->adjusted_mode.flags |= flags;
+
+ if (dp_to_dig_port(intel_dp)->port == PORT_A) {
+ if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ)
+ pipe_config->port_clock = 162000;
+ else
+ pipe_config->port_clock = 270000;
+ }
}
static void intel_disable_dp(struct intel_encoder *encoder)