blob: 9bdb33789964fc80a570f5163308b86261659fbc [file] [log] [blame]
From koba@kmckk.co.jp Wed Oct 3 04:26:47 2012
From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Date: Wed, 3 Oct 2012 20:22:55 +0900
Subject: [PATCH 03/26] serial/8250_pci: fix suspend/resume vs init/exit quirks
To: greg@kroah.com
Cc: ltsi-dev@lists.linuxfoundation.org, horms@verge.net.au, damm@opensource.se, Dan Williams <dan.j.williams@intel.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Message-ID: <1349263398-13152-4-git-send-email-koba@kmckk.co.jp>
From: Dan Williams <dan.j.williams@intel.com>
Commit e86ff4a6 "serial/8250_pci: init-quirk msi support for kt serial
controller" introduced a regression in suspend/resume by causing msi's
to be enabled twice without an intervening disable.
00:16.3 Serial controller: Intel Corporation Patsburg KT Controller (rev 05) (prog-if 02 [16550])
Subsystem: Intel Corporation Device 7270
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 72
I/O ports at 4080 [size=8]
Memory at d1c30000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: serial
[ 365.250523] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:16.3/msi_irqs'
[ 365.250525] Modules linked in: nls_utf8 ipv6 uinput sg iTCO_wdt
iTCO_vendor_support ioatdma dca i2c_i801 i2c_core wmi sd_mod ahci libahci isci
libsas libata scsi_transport_sas [last unloaded: scsi_wait_scan]
[ 365.250540] Pid: 9030, comm: kworker/u:1 Tainted: G W 3.3.0-isci-3.0.213+ #1
[ 365.250542] Call Trace:
[ 365.250545] [<ffffffff8115e955>] ? sysfs_add_one+0x99/0xad
[ 365.250548] [<ffffffff8102db8b>] warn_slowpath_common+0x85/0x9e
[ 365.250551] [<ffffffff8102dc96>] warn_slowpath_fmt+0x6e/0x70
[ 365.250555] [<ffffffff8115e8fa>] ? sysfs_add_one+0x3e/0xad
[ 365.250558] [<ffffffff8115e8b4>] ? sysfs_pathname+0x3c/0x44
[ 365.250561] [<ffffffff8115e8b4>] ? sysfs_pathname+0x3c/0x44
[ 365.250564] [<ffffffff8115e8b4>] ? sysfs_pathname+0x3c/0x44
[ 365.250567] [<ffffffff8115e8b4>] ? sysfs_pathname+0x3c/0x44
[ 365.250570] [<ffffffff8115e955>] sysfs_add_one+0x99/0xad
[ 365.250573] [<ffffffff8115f031>] create_dir+0x72/0xa5
[ 365.250577] [<ffffffff8115f194>] sysfs_create_dir+0xa2/0xbe
[ 365.250581] [<ffffffff81262463>] kobject_add_internal+0x126/0x1f8
[ 365.250585] [<ffffffff8126255b>] kset_register+0x26/0x3f
[ 365.250588] [<ffffffff8126275a>] kset_create_and_add+0x62/0x7c
[ 365.250592] [<ffffffff81293619>] populate_msi_sysfs+0x34/0x103
[ 365.250595] [<ffffffff81293e1c>] pci_enable_msi_block+0x1b3/0x216
[ 365.250599] [<ffffffff81303f7c>] try_enable_msi+0x13/0x17
[ 365.250603] [<ffffffff81303fb3>] pciserial_resume_ports+0x21/0x42
[ 365.250607] [<ffffffff81304041>] pciserial_resume_one+0x50/0x57
[ 365.250610] [<ffffffff81283e1a>] pci_legacy_resume+0x38/0x47
[ 365.250613] [<ffffffff81283e7d>] pci_pm_restore+0x54/0x87
[ 365.250616] [<ffffffff81283e29>] ? pci_legacy_resume+0x47/0x47
[ 365.250619] [<ffffffff8131e9e8>] dpm_run_callback+0x48/0x7b
[ 365.250623] [<ffffffff8131f39a>] device_resume+0x342/0x394
[ 365.250626] [<ffffffff8131f5b7>] async_resume+0x21/0x49
That patch has since been reverted, but by inspection it seems that
pciserial_suspend_ports() should be invoking .exit() quirks to release
resources acquired during .init().
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 5f1a38952b7e932a1c169c28917b9a831f641bcc)
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
---
drivers/tty/serial/8250/8250_pci.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2873,6 +2873,12 @@ void pciserial_suspend_ports(struct seri
for (i = 0; i < priv->nr; i++)
if (priv->line[i] >= 0)
serial8250_suspend_port(priv->line[i]);
+
+ /*
+ * Ensure that every init quirk is properly torn down
+ */
+ if (priv->quirk->exit)
+ priv->quirk->exit(priv->dev);
}
EXPORT_SYMBOL_GPL(pciserial_suspend_ports);