blob: aebd01fc28e59a3b5c530c8a596a4fcccd3e15df [file] [log] [blame]
### General setup
CONFIG_EXPERIMENTAL=y
CONFIG_LOCALVERSION="-unicore32"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_HOTPLUG=y
# Initial RAM filesystem and RAM disk (initramfs/initrd) support
#CONFIG_BLK_DEV_INITRD=y
#CONFIG_INITRAMFS_SOURCE="arch/unicore/ramfs/ramfs_config"
### Enable loadable module support
CONFIG_MODULES=n
CONFIG_MODULE_UNLOAD=y
### System Type
CONFIG_ARCH_PUV3=y
# Board Selection
CONFIG_PUV3_NB0916=y
# Processor Features
CONFIG_CPU_DCACHE_LINE_DISABLE=y
CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE=n
### Bus support
CONFIG_PCI=y
CONFIG_PCI_LEGACY=n
### Boot options
# for debug, adding: earlyprintk=ocd,keep initcall_debug
# others support: test_suspend=mem root=/dev/sda
# hibernate support: resume=/dev/sda3
CONFIG_CMDLINE="earlyprintk=ocd,keep ignore_loglevel"
# TODO: mem=512M video=unifb:1024x600-16@75
# for nfs: root=/dev/nfs rw nfsroot=192.168.10.88:/home/udb/nfs/,rsize=1024,wsize=1024
# ip=192.168.10.83:192.168.10.88:192.168.10.1:255.255.255.0::eth0:off
CONFIG_CMDLINE_FORCE=y
### Power management options
CONFIG_PM=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda3"
CONFIG_CPU_FREQ=n
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
### Networking support
CONFIG_NET=y
# Networking options
CONFIG_PACKET=m
CONFIG_UNIX=m
# TCP/IP networking
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IPV6=n
# Wireless
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
### PKUnity SoC Features
CONFIG_USB_WLAN_HED_AQ3=n
CONFIG_USB_CMMB_INNOFIDEI=n
CONFIG_I2C_BATTERY_BQ27200=n
CONFIG_I2C_EEPROM_AT24=n
CONFIG_LCD_BACKLIGHT=n
CONFIG_PUV3_UMAL=y
CONFIG_PUV3_MUSB=n
CONFIG_PUV3_AC97=n
CONFIG_PUV3_NAND=n
CONFIG_PUV3_MMC=n
CONFIG_PUV3_UART=n
### Device Drivers
# Memory Technology Device (MTD) support
CONFIG_MTD=m
CONFIG_MTD_UBI=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
# RAM/ROM/Flash chip drivers
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_CFI_AMDSTD=m
# Mapping drivers for chip access
CONFIG_MTD_PHYSMAP=m
# Block devices
CONFIG_BLK_DEV_LOOP=m
# SCSI device support
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
# Serial ATA (prod) and Parallel ATA (experimental) drivers
CONFIG_ATA=y
CONFIG_SATA_VIA=y
# Network device support
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NETDEV_1000=y
# Wireless LAN
CONFIG_WLAN_80211=n
CONFIG_RT2X00=n
CONFIG_RT73USB=n
# Input device support
CONFIG_INPUT_EVDEV=m
# Keyboards
CONFIG_KEYBOARD_GPIO=m
# I2C support
CONFIG_I2C=y
CONFIG_I2C_PUV3=y
# Hardware Monitoring support
#CONFIG_SENSORS_LM75=m
# Generic Thermal sysfs driver
#CONFIG_THERMAL=m
#CONFIG_THERMAL_HWMON=y
# Multimedia support
CONFIG_MEDIA_SUPPORT=n
CONFIG_VIDEO_DEV=n
CONFIG_USB_VIDEO_CLASS=n
# Graphics support
CONFIG_FB=y
CONFIG_FB_PUV3_UNIGFX=y
# Console display driver support
CONFIG_VGA_CONSOLE=n
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# Bootup logo
CONFIG_LOGO=n
# Sound card support
CONFIG_SOUND=m
# Advanced Linux Sound Architecture
CONFIG_SND=m
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# USB support
CONFIG_USB_ARCH_HAS_HCD=n
CONFIG_USB=n
CONFIG_USB_PRINTER=n
CONFIG_USB_STORAGE=n
# Inventra Highspeed Dual Role Controller
CONFIG_USB_MUSB_HDRC=n
# LED Support
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
# LED Triggers
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# Real Time Clock
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PUV3=y
### File systems
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=m
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
# DOS/FAT/NT Filesystems
CONFIG_VFAT_FS=m
# Pseudo filesystems
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# Miscellaneous filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_JFFS2_FS=m
CONFIG_UBIFS_FS=m
# Network File Systems
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
# Partition Types
CONFIG_PARTITION_ADVANCED=y
CONFIG_MSDOS_PARTITION=y
# Native language support
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
### Kernel hacking
CONFIG_FRAME_WARN=8096
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_PROVE_LOCKING=n
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_LL=y