)]}' { "log": [ { "commit": "fef24f4f38eb685a6da29097930e6e49b378f8fb", "tree": "83f8547dd0b34938cd903dafcb3e64d82668ea6f", "parents": [ "1bbba03d0e01ac466d063732afff3a5faadde2d3" ], "author": { "name": "Łukasz Majewski", "email": "l.majewski@samsung.com", "time": "Wed Dec 11 07:15:42 2013 +0100" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 20 10:48:06 2013 -0500" }, "message": "ARM: Samsung: Change GONI and Universal_C210 maintainers.\n\nUpdate boards.cfg entries for Samsung\u0027s GONI and Universal_C210 maintainers\nentry.\n\nSigned-off-by: Lukasz Majewski \u003cl.majewski@samsung.com\u003e\nAcked-by: Minkyu Kang \u003cmk7.kang@samsung.com\u003e\n" }, { "commit": "1bbba03d0e01ac466d063732afff3a5faadde2d3", "tree": "c03ba850505b4e01835c796616c6c67879a7fc61", "parents": [ "ef184040b74ebba48edbc3ae7bf84b2753b8774c", "ac5cce38de8f97a120b8c98f34be0d5eec50a6fb" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Thu Dec 19 14:22:12 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Thu Dec 19 14:22:12 2013 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.denx.de/u-boot-spi\n" }, { "commit": "ac5cce38de8f97a120b8c98f34be0d5eec50a6fb", "tree": "74d5d9b3302c59998ced38d04347a3ae6458439c", "parents": [ "2c57b03bab960b77303043cb9736050173d36fb9" ], "author": { "name": "Poddar, Sourav", "email": "sourav.poddar@ti.com", "time": "Thu Nov 14 21:01:15 2013 +0530" }, "committer": { "name": "Jagannadha Sutradharudu Teki", "email": "jaganna@xilinx.com", "time": "Thu Dec 19 12:23:22 2013 +0530" }, "message": "driver: mtd: sf_ops: claim bus while doing memcpy\n\nclaim spi bus while doing memory copy, this will set up\nthe spi controller device control register before doing\na memory read.\n\nSigned-off-by: Sourav Poddar \u003csourav.poddar@ti.com\u003e\nTested-by: Yebio Mesfin \u003cymesfin@ti.com\u003e\nReviewed-by: Jagannadha Sutradharudu Teki \u003cjaganna@xilinx.com\u003e\n" }, { "commit": "2c57b03bab960b77303043cb9736050173d36fb9", "tree": "03b4669ae88f4b9c599e27b915cf2ed16ea8cf3f", "parents": [ "60acde43d71cf0701b1124998bf4ab457c6640b6" ], "author": { "name": "Poddar, Sourav", "email": "sourav.poddar@ti.com", "time": "Thu Nov 14 21:01:14 2013 +0530" }, "committer": { "name": "Jagannadha Sutradharudu Teki", "email": "jaganna@xilinx.com", "time": "Thu Dec 19 12:23:21 2013 +0530" }, "message": "config: dra7_evm: Add Bank Address Register(BAR) config\n\nAdd config to support bank address register.\n\nSigned-off-by: Sourav Poddar \u003csourav.poddar@ti.com\u003e\nTested-by: Yebio Mesfin \u003cymesfin@ti.com\u003e\nReviewed-by: Jagannadha Sutradharudu Teki \u003cjaganna@xilinx.com\u003e\n" }, { "commit": "ef184040b74ebba48edbc3ae7bf84b2753b8774c", "tree": "144167a9dd446ef1c88eed8a9b47e3f34d2c6f79", "parents": [ "2d65256bb0ea105eb11e30c1beb6da121b719f06", "fcd052457434d1f86c4e6d5f90d838210ab87d8b" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Wed Dec 18 18:45:39 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Wed Dec 18 18:45:39 2013 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.denx.de/u-boot-nand-flash\n" }, { "commit": "2d65256bb0ea105eb11e30c1beb6da121b719f06", "tree": "d3c16ff19eb900017d4c7df201df11f8e31f2372", "parents": [ "57270260adc6076facd284107be463f9beebb153", "eb63218b9b95a59baa8b241f3a88e4415dabf833" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Wed Dec 18 15:06:43 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Wed Dec 18 15:06:43 2013 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.denx.de/u-boot-usb\n" }, { "commit": "eb63218b9b95a59baa8b241f3a88e4415dabf833", "tree": "169b7ce3505a8778cc6616d19e64ee4f3c9e71b4", "parents": [ "1e1be6d478c7c2cddf97e2623dd5c4c10bc23020" ], "author": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Sat Dec 14 02:04:52 2013 +0100" }, "committer": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Wed Dec 18 19:53:19 2013 +0100" }, "message": "usb: ehci: Fix register access\n\nFix the register access in EHCI HCD. We need to use address of the register\nas an ehci_writel() argument.\n\nSigned-off-by: Marek Vasut \u003cmarex@denx.de\u003e\nCc: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "1e1be6d478c7c2cddf97e2623dd5c4c10bc23020", "tree": "6781728fbd8a026d88f0e614cdcba625a36bd7e3", "parents": [ "8fb83547b93cd30a803eca1fec005b3d2b86a21f" ], "author": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Sat Dec 14 02:03:11 2013 +0100" }, "committer": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Wed Dec 18 19:53:19 2013 +0100" }, "message": "usb: ehci: Do not de-init uninited controllers\n\nIn case the controller is not initialized, we shall not de-initialize it.\nAs the control structure will not be filled, we will produce a null ptr\ndereference if the controller is not inited.\n\nSigned-off-by: Marek Vasut \u003cmarex@denx.de\u003e\nCc: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "8fb83547b93cd30a803eca1fec005b3d2b86a21f", "tree": "bd913ca6382af133acc6ef55e456a22766d95dc4", "parents": [ "3990994c43e3abb05c0127d19ef67d7abde3c1b7" ], "author": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Fri Dec 13 23:36:33 2013 +0100" }, "committer": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Wed Dec 18 19:53:19 2013 +0100" }, "message": "usb: ehci-pci: Clarify and cleanup the EHCI controller detection\n\nThe detection function of the EHCI PCI controller was really cryptic,\nadd a beefy comment and clean the portion of the code up a bit. No\nchange in the logic of the code.\n\nSigned-off-by: Marek Vasut \u003cmarex@denx.de\u003e\nCc: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "3990994c43e3abb05c0127d19ef67d7abde3c1b7", "tree": "71f11700f45ae944f35df9305a58d7a78940b976", "parents": [ "77b95042889c958c0da5a96a093aeb5a605ea3b4" ], "author": { "name": "Lukasz Majewski", "email": "l.majewski@samsung.com", "time": "Mon Dec 09 16:20:16 2013 +0100" }, "committer": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Wed Dec 18 19:53:19 2013 +0100" }, "message": "ARM: trats: dfu: Enable default Poll Timeout for Trats board\n\nProvide default Poll Timeout value for Trats board.\n\nSigned-off-by: Lukasz Majewski \u003cl.majewski@samsung.com\u003e\n" }, { "commit": "77b95042889c958c0da5a96a093aeb5a605ea3b4", "tree": "2e54d9706746f27367de8194732d98a2d256aa71", "parents": [ "33fac4a6a23b595a2a3cdfa76eddde98d48947b4" ], "author": { "name": "Lukasz Majewski", "email": "l.majewski@samsung.com", "time": "Mon Dec 09 16:20:15 2013 +0100" }, "committer": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Wed Dec 18 19:53:19 2013 +0100" }, "message": "usb: f_dfu: cosmetic: Code cleanup\n\nCode cleanup for dfu_bind_config function\n\nSigned-off-by: Lukasz Majewski \u003cl.majewski@samsung.com\u003e\n" }, { "commit": "33fac4a6a23b595a2a3cdfa76eddde98d48947b4", "tree": "89606102f29ed22220f2aca2f548188f0a6a5b3a", "parents": [ "4fb127898e46f0adf9fcca3cfae0987975ef34ec" ], "author": { "name": "Lukasz Majewski", "email": "l.majewski@samsung.com", "time": "Mon Dec 09 16:20:14 2013 +0100" }, "committer": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Wed Dec 18 19:53:19 2013 +0100" }, "message": "usb: dfu: f_dfu: Provide infrastructure to adjust DFU\u0027s Poll Timeout value\n\nIt is necessary to deter the host from sending subsequent DFU_GETSTATUS\nrequest in the case of e.g. writing the buffer to medium.\n\nHere the timeout is increased when we fill up the whole buffer. This delay\nallows eMMC memory to perform its internal operations.\nOtherwise we end up with HOST\u0027s error regarding GET_STATUS receive timeout.\n\nSigned-off-by: Lukasz Majewski \u003cl.majewski@samsung.com\u003e\n" }, { "commit": "4fb127898e46f0adf9fcca3cfae0987975ef34ec", "tree": "ab7edd49af2d99a0ef1322cb938315f31d72de7d", "parents": [ "f3bf212abc4139f12b472e97c1992ab32671b609" ], "author": { "name": "Lukasz Majewski", "email": "l.majewski@samsung.com", "time": "Mon Dec 09 16:20:13 2013 +0100" }, "committer": { "name": "Marek Vasut", "email": "marex@denx.de", "time": "Wed Dec 18 19:53:19 2013 +0100" }, "message": "dfu: Export allocated dfu buffer size\n\nThe method for exporting size of allocated buffer is provided.\nIt is afterwards used by USB\u0027s dfu function code.\n\nSigned-off-by: Lukasz Majewski \u003cl.majewski@samsung.com\u003e\n" }, { "commit": "60acde43d71cf0701b1124998bf4ab457c6640b6", "tree": "d78d680d6ee6100717a4a78472a82b796a83c4b5", "parents": [ "16f47c9c510a61ee91d6b9d02dd723522beff80f" ], "author": { "name": "Yen Lin", "email": "yelin@nvidia.com", "time": "Wed Dec 18 11:18:46 2013 -0700" }, "committer": { "name": "Jagannadha Sutradharudu Teki", "email": "jaganna@xilinx.com", "time": "Thu Dec 19 00:00:51 2013 +0530" }, "message": "spi: tegra: clear RDY bit prior to every transfer\n\nThe RDY bit indicates that a transfer is complete. This needs to be\ncleared by SW before every single HW transaction, rather than only\nat the start of each SW transaction (those being made up of n HW\ntransactions).\n\nIt seems that earlier HW may have cleared this bit autonomously when\nstarting a new transfer, and hence this code was not needed in practice.\nHowever, this is generally a good idea in all cases. In Tegra124, the\nHW behaviour appears to have changed, and SW must explicitly clear this\nbit. Otherwise, SW will believe that transfers have completed when they\nhave not, and may e.g. read stale data from the RX FIFO.\n\nSigned-off-by: Yen Lin \u003cyelin@nvidia.com\u003e\n[swarren, rewrote commit description, unified duplicate RDY clearing code\nand moved it right before the start of the HW transaction, unconditionally\nexit loop after reading RX data, rather than checking if TX FIFO is empty,\nsince it is guaranteed to be]\nSigned-off-by: Stephen Warren \u003cswarren@nvidia.com\u003e\nReviewed-by: Jagannadha Sutradharudu Teki \u003cjaganna@xilinx.com\u003e\n" }, { "commit": "16f47c9c510a61ee91d6b9d02dd723522beff80f", "tree": "390c3a78b921a185d08ef91582fb76ef53a7f6d8", "parents": [ "57af475389c1355f630cdafc1f3acc42347df669" ], "author": { "name": "Nobuhiro Iwamatsu", "email": "nobuhiro.iwamatsu.yj@renesas.com", "time": "Wed Dec 18 15:31:55 2013 +0900" }, "committer": { "name": "Jagannadha Sutradharudu Teki", "email": "jaganna@xilinx.com", "time": "Wed Dec 18 23:23:41 2013 +0530" }, "message": "spi: Add support SH Quad SPI driver\n\nThis patch adds a driver for Renesas SoC\u0027s Quad SPI bus.\nThis supports with 8 bits per transfer to use with SPI flash.\n\nSigned-off-by: Kouei Abe \u003ckouei.abe.cp@renesas.com\u003e\nSigned-off-by: Nobuhiro Iwamatsu \u003cnobuhiro.iwamatsu.yj@renesas.com\u003e\nSigned-off-by: Jagannadha Sutradharudu Teki \u003cjaganna@xilinx.com\u003e\n" }, { "commit": "57af475389c1355f630cdafc1f3acc42347df669", "tree": "d36aaf39875b99c7dd7d308f2b73c2663c993a5e", "parents": [ "28303f617a01d6663a54062852f67f8150b4c87a" ], "author": { "name": "Luka Perkov", "email": "luka@openwrt.org", "time": "Mon Oct 28 10:27:17 2013 +0100" }, "committer": { "name": "Jagannadha Sutradharudu Teki", "email": "jaganna@xilinx.com", "time": "Wed Dec 18 23:23:41 2013 +0530" }, "message": "sf: probe: add support for MX25L2006E\n\nAdd support for Macronix MX25L2006E SPI flash.\n\nSigned-off-by: Luka Perkov \u003cluka@openwrt.org\u003e\nReviewed-by: Jagannadha Sutradharudu Teki \u003cjagannadh.teki@gmail.com\u003e\n" }, { "commit": "28303f617a01d6663a54062852f67f8150b4c87a", "tree": "10425277c0ecdec51194387b0adf9c6910a1e06c", "parents": [ "f3bf212abc4139f12b472e97c1992ab32671b609" ], "author": { "name": "Luka Perkov", "email": "luka@openwrt.org", "time": "Mon Oct 28 10:26:41 2013 +0100" }, "committer": { "name": "Jagannadha Sutradharudu Teki", "email": "jaganna@xilinx.com", "time": "Wed Dec 18 23:23:41 2013 +0530" }, "message": "sf: probe: Hex values are in lower case\n\nAll other hex values in sf_probe.c are in lower case so we should\nfix this one too.\n\nSigned-off-by: Luka Perkov \u003cluka@openwrt.org\u003e\nReviewed-by: Jagannadha Sutradharudu Teki \u003cjagannadh.teki@gmail.com\u003e\n" }, { "commit": "57270260adc6076facd284107be463f9beebb153", "tree": "280514e031d822df024ff6c32f69ad89f677f144", "parents": [ "ace8f506423458c172e2baeb9f858928872cc744" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Wed Dec 18 19:00:51 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Wed Dec 18 10:23:37 2013 -0500" }, "message": "Makefile: fix broken pipe error for lcd4_lwmon5 board\n\nBefore this commit, a broken pipe error sometimes happened\nwhen building lcd4_lwmon5 board with Buildman.\n\nThis commit re-writes build rules of\nu-boot.spr and u-boot-img-spl-at-end.bin\nmore simply without using a pipe.\n\nBesides fixing a broken pipe error,\nthis commit gives us other advantages:\n\n - Do not generate intermidiate files, spl/u-boot-spl.img\n and spl/u-boot-spl-pad.img for creating u-boot.spr\n\n - Do not generate an intermidiate file, u-boot-pad.img\n for creating u-boot-img-spl-at-end.bin\n\nSuch intermidiate files were not deleted by \"make clean\" or \"make mrpropr\".\nNor u-boot-pad.img was ignored by git.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\nAcked-by: Stefan Roese \u003csr@denx.de\u003e\n" }, { "commit": "ace8f506423458c172e2baeb9f858928872cc744", "tree": "9946039479c37daf3f40b4c0cb67ab0d03882674", "parents": [ "f3bf212abc4139f12b472e97c1992ab32671b609" ], "author": { "name": "Bo Shen", "email": "voice.shen@atmel.com", "time": "Mon Dec 16 15:27:23 2013 +0800" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Wed Dec 18 10:23:36 2013 -0500" }, "message": "Makefile: fix the typo error for mrproper\n\nFix the typo error for mrproper from mkproper.\n\nSigned-off-by: Bo Shen \u003cvoice.shen@atmel.com\u003e\nAcked-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "f3bf212abc4139f12b472e97c1992ab32671b609", "tree": "b9bfb62c707862cea23cad4312d03d74f8dd204a", "parents": [ "3067f81f165550cbc3199ba6764eb7558699e2b0" ], "author": { "name": "Yoshihiro Shimoda", "email": "yoshihiro.shimoda.uh@renesas.com", "time": "Wed Dec 18 16:04:20 2013 +0900" }, "committer": { "name": "Nobuhiro Iwamatsu", "email": "iwamatsu@nigauri.org", "time": "Wed Dec 18 16:50:00 2013 +0900" }, "message": "serial_sh: add support for SH7753\n\nSigned-off-by: Yoshihiro Shimoda \u003cyoshihiro.shimoda.uh@renesas.com\u003e\nSigned-off-by: Nobuhiro Iwamatsu \u003ciwamatsu@nigauri.org\u003e\n" }, { "commit": "3067f81f165550cbc3199ba6764eb7558699e2b0", "tree": "87455328a8db5c3437cfd442f6a679070812f109", "parents": [ "320cf350801f30875fe5749eee74aed242573031" ], "author": { "name": "Yoshihiro Shimoda", "email": "yoshihiro.shimoda.uh@renesas.com", "time": "Wed Dec 18 16:04:04 2013 +0900" }, "committer": { "name": "Nobuhiro Iwamatsu", "email": "iwamatsu@nigauri.org", "time": "Wed Dec 18 16:49:45 2013 +0900" }, "message": "net: sh-eth: add support for SH7753\n\nSH7753 has two fast ethernet controllers and two gigabit ethernet\ncontrollers. It is similar to SH7757.\n\nSigned-off-by: Yoshihiro Shimoda \u003cyoshihiro.shimoda.uh@renesas.com\u003e\nSigned-off-by: Nobuhiro Iwamatsu \u003ciwamatsu@nigauri.org\u003e\n" }, { "commit": "320cf350801f30875fe5749eee74aed242573031", "tree": "9d1c6cc30fa023b6e225fb23dee087eafee1652d", "parents": [ "fd44194945714a478fab6407c04453caaef0bac9" ], "author": { "name": "Yoshihiro Shimoda", "email": "yoshihiro.shimoda.uh@renesas.com", "time": "Wed Dec 18 16:03:44 2013 +0900" }, "committer": { "name": "Nobuhiro Iwamatsu", "email": "iwamatsu@nigauri.org", "time": "Wed Dec 18 16:49:08 2013 +0900" }, "message": "sh: add support for sh7753evb board\n\nThe SH7753 EVB board has SH7753, 512MB DDR3-SDRAM, SPI ROM,\nGigabit Ethernet, and eMMC.\n\nThis patch support the following functions:\n - 512MB DDR3-SDRAM, SCIF4, SPI ROM, Gigabit Ethernet, eMMC\n\nSigned-off-by: Yoshihiro Shimoda \u003cyoshihiro.shimoda.uh@renesas.com\u003e\nSigned-off-by: Nobuhiro Iwamatsu \u003ciwamatsu@nigauri.org\u003e\n" }, { "commit": "fcd052457434d1f86c4e6d5f90d838210ab87d8b", "tree": "814074420a575be419fa57e787a97490bf0f3c74", "parents": [ "eb237a15bd793a785feb0c77c459c9f97c6fbe4c" ], "author": { "name": "Nikita Kiryanov", "email": "nikita@compulab.co.il", "time": "Tue Dec 17 15:18:01 2013 +0200" }, "committer": { "name": "Scott Wood", "email": "scottwood@freescale.com", "time": "Tue Dec 17 17:47:47 2013 -0600" }, "message": "mtd: nand: omap: fix ecc ops assignment when changing ecc\n\nIf we change to software ecc and then back to hardware ecc, the nand ecc ops\npointers are populated with incorrect function pointers. This is related to the\nway nand_scan_tail() handles assigning functions to ecc ops:\n\nIf we are switching to software ecc/no ecc, it assigns default functions to the\necc ops pointers unconditionally, but if we are switching to hardware ecc,\nthe default hardware ecc functions are assigned to ops pointers only if these\npointers are NULL (so that drivers could set their own functions). In the case\nof omap_gpmc.c driver, when we switch to sw ecc, sw ecc functions are\nassigned to ecc ops by nand_scan_tail(), and when we later switch to hw ecc,\nthe ecc ops pointers are not NULL, so nand_scan_tail() does not overwrite\nthem with hw ecc functions.\nThe result: sw ecc functions used to write hw ecc data.\n\nClear the ecc ops pointers in omap_gpmc.c when switching ecc types, so that\nops which were not assigned by the driver will get the correct default values\nfrom nand_scan_tail().\n\nCc: Scott Wood \u003cscottwood@freescale.com\u003e\nCc: Pekon Gupta \u003cpekon@ti.com\u003e\nSigned-off-by: Nikita Kiryanov \u003cnikita@compulab.co.il\u003e\n" }, { "commit": "eb237a15bd793a785feb0c77c459c9f97c6fbe4c", "tree": "ba4253248338d3e2a14350db4df34ae9fec7c44d", "parents": [ "3ef1eadb4466a68a32cb56e6be98a98061c07673" ], "author": { "name": "Nikita Kiryanov", "email": "nikita@compulab.co.il", "time": "Mon Dec 16 19:19:01 2013 +0200" }, "committer": { "name": "Scott Wood", "email": "scottwood@freescale.com", "time": "Tue Dec 17 17:46:53 2013 -0600" }, "message": "mtd: nand: omap: fix sw-\u003ehw-\u003esw ecc switch\n\nWhen switching ecc mode, omap_select_ecc_scheme() assigns the appropriate values\ninto the current nand chip\u0027s ecc.layout struct. This is done under the\nassumption that the struct exists only to store values, so it is OK to overwrite\nit, but there is at least one situation where this assumption is incorrect:\n\nWhen switching to 1 bit hamming code sw ecc, the job of assigning layout data\nis outsourced to nand_scan_tail(), which simply assigns into ecc.layout a\npointer to an existing struct prefilled with the appropriate values. This struct\ndoubles as both data and layout definition, and therefore shouldn\u0027t be\noverwritten, but on the next switch to hardware ecc, this is exactly what\u0027s\ngoing to happen. The next time the user switches to software ecc, they\u0027re\ngoing to get a messed up ecc layout.\n\nPrevent this and possible similar bugs by explicitly using the\nprivate-to-omap_gpmc.c omap_ecclayout struct when switching ecc mode.\n\nCc: Scott Wood \u003cscottwood@freescale.com\u003e\nCc: Pekon Gupta \u003cpekon@ti.com\u003e\nSigned-off-by: Nikita Kiryanov \u003cnikita@compulab.co.il\u003e\n" }, { "commit": "3ef1eadb4466a68a32cb56e6be98a98061c07673", "tree": "43c3c94fa27511f14f4176b675591f30dd9bf9cb", "parents": [ "2528460c38dfaffe7ae430244d1fa119087c1b01" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 09:59:34 2013 -0500" }, "committer": { "name": "Scott Wood", "email": "scottwood@freescale.com", "time": "Tue Dec 17 17:44:36 2013 -0600" }, "message": "nand_util.c: Use \u0027%zd\u0027 for length in nand_unlock debug print\n\nlength is size_t so needs to be \u0027%zd\u0027 not \u0027%d\u0027 to avoid warnings.\n\nCc: Scott Wood \u003cscottwood@freescale.com\u003e\nSigned-off-by: Tom Rini \u003ctrini@ti.com\u003e\n" }, { "commit": "2528460c38dfaffe7ae430244d1fa119087c1b01", "tree": "96b4ebc087077dc0eb8309cbfb688960d0b7a507", "parents": [ "5d7a49b930156514ce9d418e26b5bf21673fd399" ], "author": { "name": "Nikita Kiryanov", "email": "nikita@compulab.co.il", "time": "Thu Dec 12 15:19:31 2013 +0200" }, "committer": { "name": "Scott Wood", "email": "scottwood@freescale.com", "time": "Tue Dec 17 17:41:25 2013 -0600" }, "message": "mtd: nand: omap: fix HAM1_SW ecc using default value for ecc.size\n\nCommit \"mtd: nand: omap: enable BCH ECC scheme using ELM for generic\nplatform\" (d016dc42cedbf6102e100fa9ecb58462edfb14f8) changed the way\nsoftware ECC is configured, both during boot, and during ecc switch, in a way\nthat is not backwards compatible with older systems:\n\nOlder version of omap_gpmc.c always assigned ecc.size \u003d 0 when configuring\nfor software ecc, relying on nand_scan_tail() to select a default for ecc.size\n(256), while the new version of omap_gpmc.c assigns ecc.size \u003d pagesize,\nwhich is likely to not be 256.\n\nSince 1 bit hamming sw ecc is only meant to be used by legacy devices, revert\nto the original behavior.\n\nCc: Igor Grinberg \u003cgrinberg@compulab.co.il\u003e\nCc: Tom Rini \u003ctrini@ti.com\u003e\nCc: Scott Wood \u003cscottwood@freescale.com\u003e\nCc: Pekon Gupta \u003cpekon@ti.com\u003e\nSigned-off-by: Nikita Kiryanov \u003cnikita@compulab.co.il\u003e\nAcked-by: Pekon Gupta \u003cpekon@ti.com\u003e\n" }, { "commit": "5d7a49b930156514ce9d418e26b5bf21673fd399", "tree": "c2cde1435374fb2c8d0c00e15e6e0abd8faddbe9", "parents": [ "69cc97f8dbf898d732fbd04852cf1068aeb991ba" ], "author": { "name": "Stefan Roese", "email": "sr@denx.de", "time": "Thu Dec 05 07:58:06 2013 +0100" }, "committer": { "name": "Scott Wood", "email": "scottwood@freescale.com", "time": "Tue Dec 17 17:31:14 2013 -0600" }, "message": "mtd: nand: omap_gpmc: cosmetic: Fix indentation\n\nSigned-off-by: Stefan Roese \u003csr@denx.de\u003e\nCc: Pekon Gupta \u003cpekon@ti.com\u003e\nCc: Scott Wood \u003cscottwood@freescale.com\u003e\n[scottwood@freescale.com: wrap some long lines]\nSigned-off-by: Scott Wood \u003cscottwood@freescale.com\u003e\n" }, { "commit": "69cc97f8dbf898d732fbd04852cf1068aeb991ba", "tree": "2168a666eb41138ab37901b55437713917efdd87", "parents": [ "fd44194945714a478fab6407c04453caaef0bac9" ], "author": { "name": "pekon gupta", "email": "pekon@ti.com", "time": "Thu Dec 05 17:54:21 2013 +0530" }, "committer": { "name": "Scott Wood", "email": "scottwood@freescale.com", "time": "Tue Dec 17 17:28:41 2013 -0600" }, "message": "mtd: nand: omap: fix ecc-layout for HAM1 ecc-scheme\n\nAs per OMAP3530 TRM referenced below [1]\n\nFor large-page NAND, ROM code expects following ecc-layout for HAM1 ecc-scheme\n - OOB[1] (offset of 1 *byte* from start of OOB) for x8 NAND device\n - OOB[2] (offset of 1 *word* from start of OOB) for x16 NAND device\n\nThus ecc-layout expected by ROM code for HAM1 ecc-scheme is:\n *for x8 NAND Device*\n +--------+---------+---------+---------+---------+---------+---------+\n | xxxx | ECC[A0] | ECC[A1] | ECC[A2] | ECC[B0] | ECC[B1] | ECC[B2] | ...\n +--------+---------+---------+---------+---------+---------+---------+\n\n *for x16 NAND Device*\n +--------+--------+---------+---------+---------+---------+---------+---------+\n | xxxxx | xxxxx | ECC[A0] | ECC[A1] | ECC[A2] | ECC[B0] | ECC[B1] | ECC[B2] |\n +--------+--------+---------+---------+---------+---------+---------+---------+\n\nThis patch fixes ecc-layout *only* for HAM1, as required by ROM-code\nFor other ecc-schemes like (BCH8) ecc-layout is same for x8 or x16 devices.\n\n[1] OMAP3530: http://www.ti.com/product/omap3530\n TRM: http://www.ti.com/litv/pdf/spruf98x\n\t\tChapter-25: Initialization Sub-topic: Memory Booting\n\t\tSection: 25.4.7.4 NAND\n\t\tFigure 25-19. ECC Locations in NAND Spare Areas\n\nReported-by: Stefan Roese \u003csr@denx.de\u003e\nSigned-off-by: Pekon Gupta \u003cpekon@ti.com\u003e\nTested-by: Stefan Roese \u003csr@denx.de\u003e\n" }, { "commit": "fd44194945714a478fab6407c04453caaef0bac9", "tree": "3307e90f2996d78c966ee24497d4e9602e969ebc", "parents": [ "215ab45a67672a7c1ceb347f7b74c94323415222" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 13:07:05 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 13:07:05 2013 -0500" }, "message": "Prepare v2014.01-rc2\n\nSigned-off-by: Tom Rini \u003ctrini@ti.com\u003e\n" }, { "commit": "215ab45a67672a7c1ceb347f7b74c94323415222", "tree": "0713ab65aca3b29aad196edfb3db481236bea5c7", "parents": [ "93b7b7fdadbbdcfacffab30a972774fa9ef8afb5", "d1486e3352c8e6b91da8e610993ea591466cb223" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 09:30:52 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 09:56:24 2013 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.denx.de/u-boot-video\n" }, { "commit": "93b7b7fdadbbdcfacffab30a972774fa9ef8afb5", "tree": "76a5f6ea724aa5b05c8d45b101262bf5d89ee06e", "parents": [ "475c506d08b20314f68c5280095a26802490c981", "ecf9ce2149bdb884ac294e9b39c673046bb9b572" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 09:13:25 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 09:13:25 2013 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.denx.de/u-boot-blackfin\n" }, { "commit": "475c506d08b20314f68c5280095a26802490c981", "tree": "05810fdbde031b84f27a79cf0d64944888081b55", "parents": [ "aaed2eb5c741b4d2184d0a270edf30e4209fa07d" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Fri Dec 06 16:34:10 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 08:59:43 2013 -0500" }, "message": "Makefile, .gitignore: Cleanup non-existing binaries\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "aaed2eb5c741b4d2184d0a270edf30e4209fa07d", "tree": "595ecedda62c008d135d5517578ff907e26e47d3", "parents": [ "e8a8b8246a5e7dee9db19b14b31039389ccf99af" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Fri Dec 06 16:34:09 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 08:59:42 2013 -0500" }, "message": "examples: x86: delete 82559_eeprom\n\nCommit fea25720 renamed arch/i386 to arch/x86.\nBut it missed to modify examples/standalone/Makefile.\n\nSince then, examples/standalone/82559_eeprom has\nnever compiled and nobody has noticed that.\n\nAfter some discussion on ML, we agreed to delete this example.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "e8a8b8246a5e7dee9db19b14b31039389ccf99af", "tree": "37cc7a667f5daf371a6df2a8636da4b9c27b2e81", "parents": [ "6bb6049bf2ecde91b62a4b3d55fa6ee8ed61520e" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Thu Nov 28 12:09:59 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 08:59:42 2013 -0500" }, "message": "Makefile: Select objects by CONFIG_ rather than $(ARCH) or $(CPU)\n\nConvert like follows:\n\n CPU mpc83xx -\u003e CONFIG_MPC83xx\n CPU mpc85xx -\u003e CONFIG_MPC85xx\n CPU mpc86xx -\u003e CONFIG_MPC86xx\n CPU mpc5xxx -\u003e CONFIG_MPC5xxx\n CPU mpc8xx -\u003e CONFIG_8xx\n CPU mpc8260 -\u003e CONFIG_8260\n CPU ppc4xx -\u003e CONFIG_4xx\n CPU x86 -\u003e CONFIG_X86\n ARCH x86 -\u003e CONFIG_X86\n ARCH powerpc -\u003e CONFIG_PPC\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "6bb6049bf2ecde91b62a4b3d55fa6ee8ed61520e", "tree": "316b3048bdae3de5cc6236f7e521bc8375b5348c", "parents": [ "82450b9a62f381ed3ef40ef3753dd4bda61db90e" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Fri Nov 29 09:43:57 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 08:59:42 2013 -0500" }, "message": "Makefile: delete unnecessary lines\n\nREMOTE_BUILD is not used any more.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "82450b9a62f381ed3ef40ef3753dd4bda61db90e", "tree": "ff76c2c08ea1ccfc0b76bd0fc30f8b74492ace77", "parents": [ "35940de1a6648c5adbb89d8f64ba9513bae5e063" ], "author": { "name": "Miao Yan", "email": "miao.yan@windriver.com", "time": "Thu Nov 28 17:51:40 2013 +0800" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 08:59:42 2013 -0500" }, "message": "README.vxworks: add a document describing the new VxWorks boot interface\n\nSigned-off-by: Miao Yan \u003cmiao.yan@windriver.com\u003e\n" }, { "commit": "35940de1a6648c5adbb89d8f64ba9513bae5e063", "tree": "442c63ca9a4e98a235d146cc558383b98e6434c6", "parents": [ "871a57bb817a7f4129d924d72f308228180c49ef" ], "author": { "name": "Miao Yan", "email": "miao.yan@windriver.com", "time": "Thu Nov 28 17:51:39 2013 +0800" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 08:59:42 2013 -0500" }, "message": "common/fdt_support.c: avoid unintended return from fdt_fixup_memory_banks()\n\nfdt_fixup_memory_banks() will add and update /memory node in\ndevice tree blob. In the case that /memory node doesn\u0027t exist,\nafter adding a new one, this function returns error.\n\nThe correct behavior should be continuing to update its properties.\n\nSigned-off-by: Miao Yan \u003cmiao.yan@windriver.com\u003e\n" }, { "commit": "871a57bb817a7f4129d924d72f308228180c49ef", "tree": "bcf61b2f18d2228f8babff21c1ae3a12a00be95b", "parents": [ "de37cdc2233c9a09bd938e78d3e81a01dbac2e0f" ], "author": { "name": "Miao Yan", "email": "miao.yan@windriver.com", "time": "Thu Nov 28 17:51:38 2013 +0800" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Mon Dec 16 08:59:05 2013 -0500" }, "message": "common/cmd_bootm: extend do_bootm_vxworks to support the new VxWorks boot interface.\n\nThe next version VxWorks adopts device tree (for PowerPC and ARM) as its hardware\ndescription mechanism. For PowerPC, the boot interface conforms to\nthe ePAPR standard, which is:\n\n void (*kernel_entry)(ulong fdt_addr,\n ulong r4 /* 0 */,\n ulong r5 /* 0 */,\n ulong r6 /* EPAPR_MAGIC */, ulong r7 /* IMA size */,\n ulong r8 /* 0 */, ulong r9 /* 0 */)\n\nFor ARM, the boot interface is:\n\n void (*kernel_entry)(void *fdt_addr)\n\nSigned-off-by: Miao Yan \u003cmiao.yan@windriver.com\u003e\n[trini: Fix build error when !CONFIG_OF_FDT is set, typo on PowerPC,\nmissing extern ft_fixup_num_cores]\nSigned-off-by: Tom Rini \u003ctrini@ti.com\u003e\n" }, { "commit": "ecf9ce2149bdb884ac294e9b39c673046bb9b572", "tree": "e8b927dd75553c52ba0cf5f65ed54126abd25b12", "parents": [ "31d5d4e056622ae655b8f37f09d643d2a4affbcb" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 09 14:55:21 2013 +0800" }, "committer": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 16 11:38:33 2013 +0800" }, "message": "blackfin: remove build warning\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\n" }, { "commit": "31d5d4e056622ae655b8f37f09d643d2a4affbcb", "tree": "a9df75ccfc75da1665b141411585dcc203f7e4b1", "parents": [ "6e6b221c4375399625a956ecb8814d176871ef19" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 09 12:56:27 2013 +0800" }, "committer": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 16 11:38:33 2013 +0800" }, "message": "blackfin: fixing warning by including proper headers\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\n" }, { "commit": "6e6b221c4375399625a956ecb8814d176871ef19", "tree": "20366c08697f10b99a1b26a4d68f38cbe26024d2", "parents": [ "a2d169087ed5c0e82356445f5f29cdd9b6c3420e" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 09 12:45:29 2013 +0800" }, "committer": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 16 11:38:32 2013 +0800" }, "message": "blackfin: fix building error by enlarging the memory size\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\n" }, { "commit": "a2d169087ed5c0e82356445f5f29cdd9b6c3420e", "tree": "0e7e0b6b94ba9791f31fc66e402f7025b27978aa", "parents": [ "fa88d88f82cb8e986c07e870c80eba4873ec0cf8" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 09 12:38:56 2013 +0800" }, "committer": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 16 11:38:32 2013 +0800" }, "message": "blackfin: Disable commands to reduce l1 ram requirement\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\n" }, { "commit": "fa88d88f82cb8e986c07e870c80eba4873ec0cf8", "tree": "c398fb16e79a28e1056a6bae18b6d92c61ce2bd5", "parents": [ "7b27a685bfc9abb58d6df843263decfe1be2ac35" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 09 12:21:07 2013 +0800" }, "committer": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 16 11:38:32 2013 +0800" }, "message": "blackfin: fix building error by adding macro CONFIG_SYS_I2C\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\n" }, { "commit": "7b27a685bfc9abb58d6df843263decfe1be2ac35", "tree": "dcb3f61eb6a1f62a23a4623ba89d6290eddc7e60", "parents": [ "e03c76c30342797a25ef9350e51c8daa0b56f1df" ], "author": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 09 12:19:38 2013 +0800" }, "committer": { "name": "Sonic Zhang", "email": "sonic.zhang@analog.com", "time": "Mon Dec 16 11:38:32 2013 +0800" }, "message": "blackfin: fix build error by adding CONFIG_BFIN_SERIAL\n\nSigned-off-by: Sonic Zhang \u003csonic.zhang@analog.com\u003e\n" }, { "commit": "de37cdc2233c9a09bd938e78d3e81a01dbac2e0f", "tree": "fac15bd2ae4a7fe6df96ee7ac1ecdc549f4a16f0", "parents": [ "17ab52fef1c5221839f294d251224e4a8f19ad35" ], "author": { "name": "Miao Yan", "email": "miao.yan@windriver.com", "time": "Thu Nov 28 17:51:37 2013 +0800" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:18:45 2013 -0500" }, "message": "common/config_defaults.h: make CONFIG_BOOTM_VXWORKS default configuration\n\nSigned-off-by: Miao Yan \u003cmiao.yan@windriver.com\u003e\n" }, { "commit": "17ab52fef1c5221839f294d251224e4a8f19ad35", "tree": "586ea53bf3eedfd6eb7e2a54743e621a284065e8", "parents": [ "878a095e441284e64e84edc77ad93c616f9ec174" ], "author": { "name": "Miao Yan", "email": "miao.yan@windriver.com", "time": "Thu Nov 28 17:51:36 2013 +0800" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:18:45 2013 -0500" }, "message": "common/cmd_bootm.c: seperate do_bootm_vxworks related code from CONFIG_CMD_ELF.\n\ndo_bootm_vxworks now is available under the configuration option\nCONFIG_BOOTM_VXWORKS, thus aligned with other operating systems\nthat supported by bootm command. The bootvx command still depneds\non CONFIG_CMD_ELF.\n\nSigned-off-by: Miao Yan \u003cmiao.yan@windriver.com\u003e\n" }, { "commit": "878a095e441284e64e84edc77ad93c616f9ec174", "tree": "ce942fe846c2020e1c59f4de976baa2bca25e878", "parents": [ "dd88ab325cfcc7f803afd40600571b3f9c79319c" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Thu Nov 28 18:31:59 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:18:45 2013 -0500" }, "message": "Makefile: delete unnecessary CPPFLAGS settings\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "dd88ab325cfcc7f803afd40600571b3f9c79319c", "tree": "a5c326330eec571614f1104badcfc41dcbd83661", "parents": [ "392ba5256ab9bf017a9b7320ef0cee98862c908d" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Thu Nov 28 16:29:23 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:18:45 2013 -0500" }, "message": "Makefile: Move some scripts imported from Linux\n\nWe have some scripts imported from Linux Kernel:\nsetlocalversion, checkstack.pl, checkpatch.pl, cleanpatch\n\nThey are located under tools/ directory in U-Boot now.\nBut they were originally located under scripts/ directory\nin Linux Kernel.\n\nThis commit moves them to the original location.\n\nIt is true that binutils-version.sh and dtc-version.sh\ndo not originate in Linux Kernel, but they should\nbe moved by analogy to gcc-version.sh.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "392ba5256ab9bf017a9b7320ef0cee98862c908d", "tree": "5579c658986bfd7096778e18b646317b051d3fb7", "parents": [ "4f57a90cfa1872c0142483e426061dca4e3c90c4" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Thu Nov 28 12:22:17 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:18:44 2013 -0500" }, "message": "drivers/mtd: descend into sub directories only when it is necessary\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "4f57a90cfa1872c0142483e426061dca4e3c90c4", "tree": "fdf0e35017b73b07077654ba256602201777123b", "parents": [ "755e08f0e56c014c106b88b8618de2c1987f393b" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Thu Nov 28 12:20:14 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:18:44 2013 -0500" }, "message": "drivers/usb/gadget: select objects by obj-$(CONFIG-...)\n\nBefore switching to the real Kbuild, drivers/usb/gadget/Makefile\nmust be fixed.\nIf none of CONFIG_USB_GADGET, CONFIG_USB_ETHER, CONFIG_USB_DEVICE\nis defined, both obj- and obj-y get empty.\n\nWe need non-empty obj- or obj-y on each Makefile\nto generate built-in.o on the real Kbuild.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "755e08f0e56c014c106b88b8618de2c1987f393b", "tree": "a10a4b5a7ae3a6be8c8fa91a4d3ebbffee7a6494", "parents": [ "8e9a6cb169ff21132ef4b56b6399419e1034da4c" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Thu Nov 28 12:09:58 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:17:33 2013 -0500" }, "message": "post: descend only when CONFIG_HAS_POST is defined\n\nAll objects under post/ directory are enabled by CONFIG_HAS_POST.\n(post/tests.o is enabled by CONFIG_POST_STD_LIST.\nBut CONFIG_POST_STD_LIST depends on CONFIG_HAS_POST.)\n\nWe can move CONFIG_HAS_POST switch to the top Makefile.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "8e9a6cb169ff21132ef4b56b6399419e1034da4c", "tree": "6b174ecb5e5f4f1090b9f90b768573aa11a3ba36", "parents": [ "9aed5a277738d7427b1949d75afbf95505c09499" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Thu Nov 28 11:06:03 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:17:33 2013 -0500" }, "message": "Makefile: delete a make rule of $(LDSCRIPT)\n\n$(LDSCRIPT) is a source file, not a generated file.\nWe do not need a make rule of $(LDSCRIPT).\n\nAnd one more trivial fix:\n$(obj)/u-boot should not dierectly depend on $(LDSCRIPTS).\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "9aed5a277738d7427b1949d75afbf95505c09499", "tree": "03452bd830f0834655d8cf1d25e5878ba67ccbd1", "parents": [ "07a1a0c93161733ff4473ebb7d642eb8b68d974e" ], "author": { "name": "Alexey Brodkin", "email": "Alexey.Brodkin@synopsys.com", "time": "Wed Nov 27 22:32:40 2013 +0400" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:17:32 2013 -0500" }, "message": "board_f: explicitly disable console on early boot\n\nIf U-Boot build with DEBUG enabled/defined the first call of \"debug\"\nfunction (that dumps data to any available console) will happen before\nzeroing of initial \"gd\" in init call \"zero_global_data\" in\n\"init_sequence_f\".\n\nAnd if stack was not filled with zeros chances are high that\n\"gd-\u003ehave_console\" won\u0027t be 0. In its turn it will cause attempt to\noutput things to non-initialized yet serial console.\n\nSo for safety and predictability we set \"gd-\u003ehave_console \u003d 0\".\n\nSigned-off-by: Alexey Brodkin \u003cabrodkin@synopsys.com\u003e\n\nCc: Mischa Jonker \u003cmjonker@synopsys.com\u003e\nCc: Wolfgang Denk \u003cwd@denx.de\u003e\nCc: Simon Glass \u003csjg@chromium.org\u003e\nAcked-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "07a1a0c93161733ff4473ebb7d642eb8b68d974e", "tree": "ab7b62daef37e181fce83d773fb9623e7b1a2f18", "parents": [ "93f70dfd58ff0c291c88af57785f131d534d5559" ], "author": { "name": "Stany MARCEL", "email": "stanypub@gmail.com", "time": "Wed Nov 27 14:48:43 2013 +0100" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:17:32 2013 -0500" }, "message": "Correct vxWorks elf boot to load at correct address\n\nargv[0] contains bootvx (command name) not the load address, if called with\nargv \u003c 2 use load_addr, else use address argument given to the command.\n\nSigned-off-by: Stany MARCEL \u003csmarcel@novasys-ingenierie.com\u003e\n" }, { "commit": "93f70dfd58ff0c291c88af57785f131d534d5559", "tree": "8035c20ba65ed40236e9ef50920f1c11102d47e8", "parents": [ "de04d64eda42490f94d638e8ee2e12e494e80417" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Tue Nov 26 18:05:45 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:17:32 2013 -0500" }, "message": ".gitignore: ignore spl/ and tpl/ directories except spl/Makefile\n\nBefore this commit, output files under tpl/ directry\nwere not ignored.\nThis commit fixes this problem.\n\nAnd we have only one source file under spl/ directory:\n spl/Makefile\n\nSo, we can describe .gitignore more simply.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "de04d64eda42490f94d638e8ee2e12e494e80417", "tree": "bab0cab33084a61d19e2e115187878601ed3c684", "parents": [ "e2ce81696a6aeea65e86d7677d270e589a7d4d81" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Tue Nov 26 10:53:58 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:17:32 2013 -0500" }, "message": "PowerPC: merge commonly-defined flags\n\nPLATFORM_RELFLAGS +\u003d -meabi\nPLATFORM_CPPFLAGS +\u003d -ffixed-r2\nwere defined in all arch/powerpc/${CPU}/config.mk.\n\nThis commit moves them to arch/powerpc/config.mk.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "e2ce81696a6aeea65e86d7677d270e589a7d4d81", "tree": "133507d8e558da26c9d93a6614e02893dbd1f8b8", "parents": [ "ba931259b10477f5cd2dd43b290d986335d506ba" ], "author": { "name": "Kees Jongenburger", "email": "kees.jongenburger@gmail.com", "time": "Thu Dec 12 16:18:35 2013 +0100" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:17:32 2013 -0500" }, "message": "netbsd:fix documentation typo.\n\nThe documentation suggested the arguments where passed over r3-r6\nwhile the code below simply does that over r0-r3.\n\nCc: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\n" }, { "commit": "ba931259b10477f5cd2dd43b290d986335d506ba", "tree": "888a800ada6ed512d65f27b3f90625b52e53ebcf", "parents": [ "6b44adc22e6f4cc4fe8e1bb6c69b6bf8ec8da533" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Wed Dec 11 10:00:08 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:17:18 2013 -0500" }, "message": "spl/Makefile: merge LIBS-y +\u003d arch/$(ARCH)/imx-common\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "6b44adc22e6f4cc4fe8e1bb6c69b6bf8ec8da533", "tree": "13a49070f11ef52c23b4ff96b2fda98564aec025", "parents": [ "18e8672449d812ba7791f166245bc45eab30dbf9" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Thu Dec 05 14:48:39 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:16:20 2013 -0500" }, "message": "yaffs2: Use lldiv for 64bit division\n\nSigned-off-by: Tom Rini \u003ctrini@ti.com\u003e\n" }, { "commit": "18e8672449d812ba7791f166245bc45eab30dbf9", "tree": "5acd9078fc238350fcd937a42c058231508bfbd5", "parents": [ "49a90e29754bf4dc231e882375378996ca570cbf" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Thu Dec 05 14:48:38 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:16:20 2013 -0500" }, "message": "JFFS2: Correct jffs2_1pass_build_lists to use lldiv\n\nSince part_info size became 64bit we need to use lldiv here.\n\nSigned-off-by: Tom Rini \u003ctrini@ti.com\u003e\n" }, { "commit": "49a90e29754bf4dc231e882375378996ca570cbf", "tree": "1fba3c4c540202a9f73c8029dfa47867f55213cb", "parents": [ "e83bab8403bf5c1cb81b5c0a749c50b917bc9fc3" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Thu Dec 05 14:48:37 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:16:20 2013 -0500" }, "message": "ARM:PXA: Correct tick_to_time / us_to_tick to use lldiv\n\nCc: Marek Vasut \u003cmarek.vasut@gmail.com\u003e\nSigned-off-by: Tom Rini \u003ctrini@ti.com\u003e\nAcked-by: Marek Vasut \u003cmarex@denx.de\u003e\n" }, { "commit": "e83bab8403bf5c1cb81b5c0a749c50b917bc9fc3", "tree": "4389ede103f5b5b0fa8d3d0ff06fe8b1665616d5", "parents": [ "2cd1b57220697ac47e4a63fb6a0a79eda2217f9d" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Thu Dec 05 14:48:36 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:16:20 2013 -0500" }, "message": "ARM:zynq: Correct __udelay to use lldiv\n\nCc: Michal Simek \u003cmonstr@monstr.eu\u003e\nSigned-off-by: Tom Rini \u003ctrini@ti.com\u003e\n" }, { "commit": "2cd1b57220697ac47e4a63fb6a0a79eda2217f9d", "tree": "2991c29b493004fde9cc67c9ab5fc05d42675dea", "parents": [ "74c43bb3d3fa322af17322384324c63c947bb124" ], "author": { "name": "Stephen Warren", "email": "swarren@nvidia.com", "time": "Thu Dec 05 12:08:09 2013 -0700" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:15:33 2013 -0500" }, "message": "time: fix usec_to_tick()\n\nCommit 8dfafdde88eb (\"Introduce common timer functions\") created a\ncommon definition of usec_to_tick() which had a couple problems:\n\nstatic unsigned long long usec_to_tick(unsigned long usec)\n{\n uint64_t tick \u003d usec * get_tbclk();\n\nThat likely overflows.\n\n usec *\u003d get_tbclk();\n\nThat was an attempt to fix it by performing the multiply after the\npromotion of usec to 64-bit, but was applied to the wrong variable,\nwhich was never used.\n\nThis patch fixes these issues. A user-visible symptom of the problem was\nthe e.g. \"dhcp zImage\" using an ASIX USB Ethernet dongle would print:\n\nWaiting for Ethernet connection... unable to connect.\n\n... with no delay before \"unable to connect\". There are likely other\nsymptoms.\n\nSigned-off-by: Stephen Warren \u003cswarren@nvidia.com\u003e\nAcked-by: Rob Herring \u003crob.herring@calxeda.com\u003e\n" }, { "commit": "74c43bb3d3fa322af17322384324c63c947bb124", "tree": "a249695cd1d8da307fd05dcc8d0ff68a739c55fe", "parents": [ "a8c075414a48663b0604c22b90883e651c1a053d" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Thu Dec 05 15:30:18 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:15:33 2013 -0500" }, "message": "Makefile: correct dependencies of asm-offsets.[hs]\n\nThese four generated files depends on neither {spl,tpl}-autoconf.mk\nnor autoconf.mk.dep.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "a8c075414a48663b0604c22b90883e651c1a053d", "tree": "37d456735780f92e5fa05a07b380ce7ac06f77eb", "parents": [ "65947ab4c98b882e2ce68c1970e7e7cf208b40e7" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Thu Dec 05 15:08:31 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:15:33 2013 -0500" }, "message": "Makefile: use two double-quotations as a pair\n\nSome editors such as Emacs can highlight source files.\nBut their parser algorithm is not perfect.\n\nIf you use one double-quotation alone, some editor cannot\nhandle it nicely and mark source lines as a string by mistake.\n\nIt is preferable to use two double-quotations as a pair.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "65947ab4c98b882e2ce68c1970e7e7cf208b40e7", "tree": "c9eb1f8fe3f9d5d998a879b341ee5f6c59ed3912", "parents": [ "6496d00fb80465b4b6c35a7af8631ce09a0ff5bd" ], "author": { "name": "Masahiro Yamada", "email": "yamada.m@jp.panasonic.com", "time": "Mon Dec 02 14:57:29 2013 +0900" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:15:32 2013 -0500" }, "message": "Makefile: Do not create empty autoconf.mk on error\n\nThe build rules of\n - include/autoconf.mk.dep\n - include/autoconf.mk\n - include/spl-autoconf.mk\n - include/tpl-autoconf.mk\nwere not nice.\n\nThey created empty files (which are never updated)\nif an error occurs during preprocessing.\n\nSigned-off-by: Masahiro Yamada \u003cyamada.m@jp.panasonic.com\u003e\n" }, { "commit": "6496d00fb80465b4b6c35a7af8631ce09a0ff5bd", "tree": "7c75c89f6341d35392c93cdce9e9acf4f24dec96", "parents": [ "a804b5ce2d84dca6f9e145003e588876adf2c71f" ], "author": { "name": "Guilherme Maciel Ferreira", "email": "guilherme.maciel.ferreira@gmail.com", "time": "Sun Dec 01 12:43:12 2013 -0700" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:15:32 2013 -0500" }, "message": "sandbox: dumpimage: Test dumpimage\n\nAdd a test for dumpimage.\n\nSigned-off-by: Guilherme Maciel Ferreira \u003cguilherme.maciel.ferreira@gmail.com\u003e\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "a804b5ce2d84dca6f9e145003e588876adf2c71f", "tree": "60342a722b9322a3672e7edd8d4ee260cbf44cf6", "parents": [ "f86ed6a8d52c99bb2d17d3cac1647edca0c4399c" ], "author": { "name": "Guilherme Maciel Ferreira", "email": "guilherme.maciel.ferreira@gmail.com", "time": "Sun Dec 01 12:43:11 2013 -0700" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:15:32 2013 -0500" }, "message": "Add dumpimage, a tool to extract data from U-Boot images\n\nGiven a multi-file image created through the mkimage\u0027s -d option:\n\n $ mkimage -A x86 -O linux -T multi -n x86 -d vmlinuz:initrd.img:System.map \\\n multi.img\n\n Image Name: x86\n Created: Thu Jul 25 10:29:13 2013\n Image Type: Intel x86 Linux Multi-File Image (gzip compressed)\n Data Size: 13722956 Bytes \u003d 13401.32 kB \u003d 13.09 MB\n Load Address: 00000000\n Entry Point: 00000000\n Contents:\n Image 0: 4040128 Bytes \u003d 3945.44 kB \u003d 3.85 MB\n Image 1: 7991719 Bytes \u003d 7804.41 kB \u003d 7.62 MB\n Image 2: 1691092 Bytes \u003d 1651.46 kB \u003d 1.61 MB\n\nIt is possible to perform the innverse operation -- extracting any file from\nthe image -- by using the dumpimage\u0027s -i option:\n\n $ dumpimage -i multi.img -p 2 System.map\n\nAlthough it\u0027s feasible to retrieve \"data files\" from image through scripting,\nthe requirement to embed tools such \u0027dd\u0027, \u0027awk\u0027 and \u0027sed\u0027 for this sole purpose\nis cumbersome and unreliable -- once you must keep track of file sizes inside\nthe image. Furthermore, extracting data files using \"dumpimage\" tool is faster\nthan through scripting.\n\nSigned-off-by: Guilherme Maciel Ferreira \u003cguilherme.maciel.ferreira@gmail.com\u003e\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "f86ed6a8d52c99bb2d17d3cac1647edca0c4399c", "tree": "60918bb807d062bf1ee3771b2ac4ff1057ec5e7a", "parents": [ "f1cc458cf3b1c972082b14c7901b43300634a78a" ], "author": { "name": "Guilherme Maciel Ferreira", "email": "guilherme.maciel.ferreira@gmail.com", "time": "Sun Dec 01 12:43:10 2013 -0700" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:15:32 2013 -0500" }, "message": "tools: moved code common to all image tools to a separated module.\n\nIn order to avoid duplicating code and keep only one point of modification,\nthe functions, structs and defines useful for \"dumpimage\" were moved from\n\"mkimage\" to a common module called \"imagetool\".\n\nThis modification also weakens the coupling between image types (FIT, IMX, MXS,\nand so on) and image tools (mkimage and dumpimage). Any tool may initialize the\n\"imagetool\" through register_image_tool() function, while the image types\nregister themselves within an image tool using the register_image_type()\nfunction:\n\n +---------------+\n +------| fit_image |\n +--------------+ +-----------+ | +---------------+\n | mkimage |--------\u003e | | \u003c-----+\n +--------------+ | | +---------------+\n | imagetool | \u003c------------| imximage |\n +--------------+ | | +---------------+\n | dumpimage |--------\u003e | | \u003c-----+\n +--------------+ +-----------+ | +---------------+\n +------| default_image |\n +---------------+\n\n register_image_tool() register_image_type()\n\nAlso, the struct \"mkimage_params\" was renamed to \"image_tool_params\" to make\nclear its general purpose.\n\nSigned-off-by: Guilherme Maciel Ferreira \u003cguilherme.maciel.ferreira@gmail.com\u003e\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "f1cc458cf3b1c972082b14c7901b43300634a78a", "tree": "c2242dd54e847a14fb00a8e40a3b1d6505a89681", "parents": [ "2c808a12ea7e00d5078e57a9640adcb0504c739c" ], "author": { "name": "Guilherme Maciel Ferreira", "email": "guilherme.maciel.ferreira@gmail.com", "time": "Sun Dec 01 12:43:09 2013 -0700" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:15:32 2013 -0500" }, "message": "mkimage: added \u0027static\u0027 specifier to match function\u0027s prototype.\n\nThis function should be declared static.\n\nSigned-off-by: Guilherme Maciel Ferreira \u003cguilherme.maciel.ferreira@gmail.com\u003e\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "2c808a12ea7e00d5078e57a9640adcb0504c739c", "tree": "4a8aab2291edcf045aab53c2cba70021e72f15fd", "parents": [ "5deccafa1870c4c4eb588ebcc6b4e95c4d7a59f6" ], "author": { "name": "Vladimir Zapolskiy", "email": "vz@mleia.com", "time": "Sun Dec 01 20:07:28 2013 +0200" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:15:32 2013 -0500" }, "message": "kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX\n\nThe last users of CONFIG_KGDB_SER_INDEX were removed more than 3 years\nago in commits 550650ddd0 and bf16500f79, either kgdb subsystem should\ncare about this parameter or it should be gone completely.\n\nSigned-off-by: Vladimir Zapolskiy \u003cvz@mleia.com\u003e\n" }, { "commit": "5deccafa1870c4c4eb588ebcc6b4e95c4d7a59f6", "tree": "f61e20e74cbe1e919b058d0bfe809220d2993231", "parents": [ "e03c76c30342797a25ef9350e51c8daa0b56f1df" ], "author": { "name": "Vladimir Zapolskiy", "email": "vz@mleia.com", "time": "Sat Nov 30 16:47:01 2013 +0200" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Fri Dec 13 09:14:34 2013 -0500" }, "message": "serial: lpc32xx: send CR before LF\n\nFor LPC32XX high-speed UART it is required to send a carriage return\nsymbol along with line feed. The problem was introduced in e503f90a\ncommit.\n\nSigned-off-by: Vladimir Zapolskiy \u003cvz@mleia.com\u003e\nCc: Marek Vasut \u003cmarex@denx.de\u003e\nAcked-by: Marek Vasut \u003cmarex@denx.de\u003e\n" }, { "commit": "e03c76c30342797a25ef9350e51c8daa0b56f1df", "tree": "8e1c895676a107de39e30ee330c7b6a3af6fbd8c", "parents": [ "5037947a02f884219795e2c989d3a0a840fcd292" ], "author": { "name": "Prabhakar Kushwaha", "email": "prabhakar@freescale.com", "time": "Wed Dec 11 12:49:13 2013 +0530" }, "committer": { "name": "York Sun", "email": "yorksun@freescale.com", "time": "Wed Dec 11 11:12:54 2013 -0800" }, "message": "powerpc/mpc85xx: Update CONFIG_SYS_FSL_TBCLK_DIV for T1040\n\nThe default value of CONFIG_SYS_FSL_TBCLK_DIV is 16.\n\nSo, update its value as default.\n\nSigned-off-by: Prabhakar Kushwaha \u003cprabhakar@freescale.com\u003e\nAcked-by: York Sun \u003cyorksun@freescale.com\u003e\n" }, { "commit": "5037947a02f884219795e2c989d3a0a840fcd292", "tree": "52df8743cbb932a2263f80841e747c63924afbf7", "parents": [ "732dfe090d50af53bb682d0c8971784f8de1f90f" ], "author": { "name": "Claudiu Manoil", "email": "claudiu.manoil@freescale.com", "time": "Tue Dec 10 11:22:22 2013 +0200" }, "committer": { "name": "York Sun", "email": "yorksun@freescale.com", "time": "Wed Dec 11 11:12:29 2013 -0800" }, "message": "powerpc/p1_p2_rdb_pc: Fix warnings for __iomem pointers\n\nAdd the __iomem address space marker for the tsec pointers\nto struct tsec_mii_mng memory mapped register regions.\nThis solves the sparse warnings for mixig normal pointers with\n__iomem pointers for tsec.\n\np1_p2_rdb_pc.c:373:24: warning: incorrect type in assignment (different\naddress spaces)\np1_p2_rdb_pc.c:373:24: expected struct tsec_mii_mng [noderef]\n\u003casn:2\u003e*regs\np1_p2_rdb_pc.c:373:24: got struct tsec_mii_mng *\u003cnoident\u003e\n\nUse TSEC_GET_MDIO_REGS_BASE() for the remaining mdio \u0027regs\u0027\ninitializations to remove the __iomem warnings and for consistency.\n\nSigned-off-by: Claudiu Manoil \u003cclaudiu.manoil@freescale.com\u003e\nAcked-by: York Sun \u003cyorksun@freescale.com\u003e\n" }, { "commit": "732dfe090d50af53bb682d0c8971784f8de1f90f", "tree": "604c964811efd4bc0357e16e08bc7dceabb9aaaf", "parents": [ "c1015c67f4cb01bdd59642c912263cf62e70e8d1" ], "author": { "name": "Shengzhou Liu", "email": "Shengzhou.Liu@freescale.com", "time": "Mon Dec 02 10:23:11 2013 +0800" }, "committer": { "name": "York Sun", "email": "yorksun@freescale.com", "time": "Wed Dec 11 11:12:20 2013 -0800" }, "message": "net/fman: add ft_fixup_xgec to support 3rd and 4th 10GEC\n\nAs mEMAC1 and mEMAC2 are dual-role MACs, which are used as 1G or 10G MAC.\nSo we update dynamically \u0027cell-index\u0027 to \u00272\u0027 and \u00273\u0027 for 10GEC3 and 10GEC4.\nAlso change \u0027fsl,fman-port-1g-rx\u0027 to \u0027fsl,fman-port-10g-rx\u0027, ditto for Tx.\n\nSigned-off-by: Shengzhou Liu \u003cShengzhou.Liu@freescale.com\u003e\nAcked-by: York Sun \u003cyorksun@freescale.com\u003e\n" }, { "commit": "c1015c67f4cb01bdd59642c912263cf62e70e8d1", "tree": "2e1c628a36aa35fa21ad35ad5f9bfe99bf7e0f0f", "parents": [ "4b210ad34282bfd9fc982a8e3c9a9126f4094cdb" ], "author": { "name": "Shaohui Xie", "email": "Shaohui.Xie@freescale.com", "time": "Thu Nov 28 13:52:51 2013 +0800" }, "committer": { "name": "York Sun", "email": "yorksun@freescale.com", "time": "Wed Dec 11 11:12:04 2013 -0800" }, "message": "powerpc/t4240: Add a frequency setting case for fman1\n\nA new valid setting case added for fman1, it uses platform frequency.\n\nSigned-off-by: Shaohui Xie \u003cShaohui.Xie@freescale.com\u003e\nAcked-by: York Sun \u003cyorksun@freescale.com\u003e\n" }, { "commit": "4b210ad34282bfd9fc982a8e3c9a9126f4094cdb", "tree": "f91ebdc46ede952728602d5ecc18e64ad0e52682", "parents": [ "65b7fe28a12bbaccc7a0c076f5f9f213150030e7", "f15ea6e1d67782a1626d4a4922b6c20e380085e5" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Tue Dec 10 17:15:18 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Tue Dec 10 17:15:18 2013 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.denx.de/u-boot-arm\n\nConflicts:\n\tboard/samsung/trats2/trats2.c\n\tinclude/configs/exynos5250-dt.h\n\nSigned-off-by: Tom Rini \u003ctrini@ti.com\u003e\n" }, { "commit": "f15ea6e1d67782a1626d4a4922b6c20e380085e5", "tree": "57d78f1ee94a2060eaa591533278d2934d4f1da3", "parents": [ "cb7ee1b98cac6baf244daefb1192adf5a47bc983", "f44483b57c49282299da0e5c10073b909cdad979" ], "author": { "name": "Albert ARIBAUD", "email": "albert.u.boot@aribaud.net", "time": "Tue Dec 10 14:31:56 2013 +0100" }, "committer": { "name": "Albert ARIBAUD", "email": "albert.u.boot@aribaud.net", "time": "Tue Dec 10 22:23:59 2013 +0100" }, "message": "Merge branch \u0027u-boot/master\u0027 into \u0027u-boot-arm/master\u0027\n\nConflicts:\n\tarch/arm/cpu/armv7/rmobile/Makefile\n\tdoc/README.scrapyard\n\nNeeded manual fix:\n\tarch/arm/cpu/armv7/omap-common/Makefile\n\tboard/compulab/cm_t335/u-boot.lds\n" }, { "commit": "65b7fe28a12bbaccc7a0c076f5f9f213150030e7", "tree": "96be894262501d04c9bb637a837180b7708e49e8", "parents": [ "e1e3de79515b95712a41f52c86a0181530f2fc03", "ca9a501953ce945da8e76d86a0ddf070a7f729b8" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Tue Dec 10 09:36:23 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Tue Dec 10 09:36:23 2013 -0500" }, "message": "Merge branch \u0027spi\u0027 of git://git.denx.de/u-boot-x86\n" }, { "commit": "e1e3de79515b95712a41f52c86a0181530f2fc03", "tree": "e41ab8c6797adcfde2f468d8ced1768c61f66bda", "parents": [ "76a8265b4f54d1b9cd2b70efb46dcdeaa5d20bfb", "adebb98ba12008021e75a2881deb424db0184770" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Tue Dec 10 09:33:13 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Tue Dec 10 09:33:13 2013 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.denx.de/u-boot-mmc\n" }, { "commit": "76a8265b4f54d1b9cd2b70efb46dcdeaa5d20bfb", "tree": "47ede3d54193de3883adc8ae6bdbf16c1fcab271", "parents": [ "3f56795635ab419d3378451a9291490cfa47f472", "e717fc6d1a2b459ae8352f7af5945cc0c216ab1e" ], "author": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Tue Dec 10 09:29:45 2013 -0500" }, "committer": { "name": "Tom Rini", "email": "trini@ti.com", "time": "Tue Dec 10 09:29:45 2013 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.denx.de/u-boot-i2c\n" }, { "commit": "cb7ee1b98cac6baf244daefb1192adf5a47bc983", "tree": "1f8b3305fcc9d2fa6bdfbcb7ff1a8eabd739cec4", "parents": [ "3b100f6ce211611cca3bd8ec3d40b2e5e128f9f4" ], "author": { "name": "Ian Campbell", "email": "ijc@hellion.org.uk", "time": "Sun Nov 17 15:17:42 2013 +0000" }, "committer": { "name": "Albert ARIBAUD", "email": "albert.u.boot@aribaud.net", "time": "Tue Dec 10 14:18:44 2013 +0100" }, "message": "vexpress: use correct timer address on extended memory map systems\n\nSigned-off-by: Ian Campbell \u003cijc@hellion.org.uk\u003e\nCc: albert.u.boot@aribaud.net\n" }, { "commit": "3b100f6ce211611cca3bd8ec3d40b2e5e128f9f4", "tree": "c2f69c9b01f4e63ec61ded22341eca9f51e51829", "parents": [ "1dcdd86205708d3ab9f0dc3a2d6b5fa12b16fde4" ], "author": { "name": "Soren Brinkmann", "email": "soren.brinkmann@xilinx.com", "time": "Wed Oct 30 15:49:32 2013 +0100" }, "committer": { "name": "Albert ARIBAUD", "email": "albert.u.boot@aribaud.net", "time": "Tue Dec 10 13:05:39 2013 +0100" }, "message": "serial: zynq: Remove unused #defines\n\nSigned-off-by: Soren Brinkmann \u003csoren.brinkmann@xilinx.com\u003e\nSigned-off-by: Michal Simek \u003cmichal.simek@xilinx.com\u003e\n" }, { "commit": "ca9a501953ce945da8e76d86a0ddf070a7f729b8", "tree": "593134d6c0570f8abf4c41d0cd7de6f327b32695", "parents": [ "ffdb20bea16e00a326cc3d106f275e58bf302a0c" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Dec 03 16:43:28 2013 -0700" }, "committer": { "name": "Simon Glass", "email": "sjg@chromium.org", "time": "Mon Dec 09 12:22:42 2013 -0700" }, "message": "sandbox: spi: Enable new spi/sf layers\n\nWe want to test SPI flash code in the sandbox, so enable the new drivers and\nthe \u0027sf test\u0027 command.\n\nThis command is used to validate the sandbox SPI / SPI flash implementation,\nso enable it.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "ffdb20bea16e00a326cc3d106f275e58bf302a0c", "tree": "468e8f02d9b56089d8e12b4ab873e0d2fb455342", "parents": [ "6122813fa2cb9eef4a211bd47292322096db9fa8" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Dec 03 16:43:27 2013 -0700" }, "committer": { "name": "Simon Glass", "email": "sjg@chromium.org", "time": "Mon Dec 09 12:22:39 2013 -0700" }, "message": "sandbox: spi: Add new SPI flash driver\n\nThis adds a SPI flash driver which simulates SPI flash clients.\nCurrently supports the bare min that U-Boot requires: you can\nprobe, read, erase, and write. Should be easy to extend to make\nit behave more exactly like a real SPI flash, but this is good\nenough to merge now.\n\nsjg@chromium.org added a README and tidied up code a little.\nAdded a required map_sysmem() for sandbox.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "6122813fa2cb9eef4a211bd47292322096db9fa8", "tree": "e795422d0412c6093736dd1c31b72155e254a5b6", "parents": [ "afb6134f30db2f97bae81ff56c7c9e4eee07b396" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Tue Dec 03 16:43:26 2013 -0700" }, "committer": { "name": "Simon Glass", "email": "sjg@chromium.org", "time": "Mon Dec 09 12:22:18 2013 -0700" }, "message": "sandbox: spi: Add SPI emulation bus\n\nThis adds a SPI framework for people to hook up simulated SPI clients.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "afb6134f30db2f97bae81ff56c7c9e4eee07b396", "tree": "b10873a9d05a5e889e4ac0c997537e8e51e2d90d", "parents": [ "0efc02499f9131bd7e1689ebb8d626ef12387de4" ], "author": { "name": "Simon Glass", "email": "sjg@chromium.org", "time": "Tue Dec 03 16:43:25 2013 -0700" }, "committer": { "name": "Simon Glass", "email": "sjg@chromium.org", "time": "Mon Dec 09 12:22:14 2013 -0700" }, "message": "spi: Add device tree binding for SPI bus\n\nThis was obtained from Linux 3.12 commit 5e01dc7b26.\n\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "0efc02499f9131bd7e1689ebb8d626ef12387de4", "tree": "d6b4296f983ebe381432d7db3b12e4368ec0efe9", "parents": [ "7b3efc66996b6686ad393b706c323990afa31930" ], "author": { "name": "Simon Glass", "email": "sjg@chromium.org", "time": "Tue Dec 03 16:43:24 2013 -0700" }, "committer": { "name": "Simon Glass", "email": "sjg@chromium.org", "time": "Mon Dec 09 12:22:12 2013 -0700" }, "message": "spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node\n\nThis allows us to put the SPI flash chip inside the SPI interface node,\nwith U-Boot finding the correct bus and chip select automatically.\n\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\n" }, { "commit": "7b3efc66996b6686ad393b706c323990afa31930", "tree": "1be7f83536e5f91b48f460feb0999bf1f23aeedb", "parents": [ "f44483b57c49282299da0e5c10073b909cdad979" ], "author": { "name": "Simon Glass", "email": "sjg@chromium.org", "time": "Tue Dec 03 16:43:23 2013 -0700" }, "committer": { "name": "Simon Glass", "email": "sjg@chromium.org", "time": "Mon Dec 09 12:22:02 2013 -0700" }, "message": "sandbox: Rename sb_cmdline_option to sandbox_cmdline_option\n\nThe new name is longer but more clearly related to sandbox.\n\nThis is in a separate patch within the same series since some comments on the\nSPI series rely on it.\n\nSigned-off-by: Simon Glass \u003csjg@chromium.org\u003e\nReviewed-by: Hung-ying Tyan \u003ctyanh@chromium.org\u003e\n" }, { "commit": "1dcdd86205708d3ab9f0dc3a2d6b5fa12b16fde4", "tree": "2fda7d36dc3571ff6d62d24b84b129644fb04bc0", "parents": [ "b89ac72a2491394849909ff59a25bfaea0f4303b" ], "author": { "name": "Mateusz Kulikowski", "email": "mateusz.kulikowski@gmail.com", "time": "Mon Dec 02 23:30:58 2013 +0100" }, "committer": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Mon Dec 09 13:21:54 2013 +0100" }, "message": "arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)\n\nAdd support for USB-A9263 board manufactured by Calao Systems\n(http://www.calao-systems.com/).\nCode is based on old U-Boot sources (2010.09) released by Calao.\n\nSigned-off-by: Mateusz Kulikowski \u003cmateusz.kulikowski@gmail.com\u003e\nSigned-off-by: Andreas Bießmann \u003candreas.devel@googlemail.com\u003e\n" }, { "commit": "b89ac72a2491394849909ff59a25bfaea0f4303b", "tree": "d2180115f4a925b15c058bef4c32f8d39378aa43", "parents": [ "0f8bc283a3253e6fc461a85daa4cd12f17f3f35c" ], "author": { "name": "Heiko Schocher", "email": "hs@denx.de", "time": "Mon Dec 02 07:47:23 2013 +0100" }, "committer": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Mon Dec 09 13:21:49 2013 +0100" }, "message": "arm, at91: add siemens corvus board\n\nenable support for the siemens AT91SAM9G20 based board corvus.\n\nSigned-off-by: Boris Schmidt \u003cboris.schmidt@siemens.com\u003e\nReviewed-by: Heiko Schocher \u003chs@denx.de\u003e\nCc: Andreas Bießmann \u003candreas.devel@googlemail.com\u003e\nCc: Bo Shen \u003cvoice.shen@atmel.com\u003e\nSigned-off-by: Andreas Bießmann \u003candreas.devel@googlemail.com\u003e\n" }, { "commit": "0f8bc283a3253e6fc461a85daa4cd12f17f3f35c", "tree": "b57b7137a6c0c647076f95ac6992d29cfd08e733", "parents": [ "bcf9fe37f5342aeebbf98a9e3800f578387b4fd7" ], "author": { "name": "Heiko Schocher", "email": "hs@denx.de", "time": "Mon Dec 02 07:47:22 2013 +0100" }, "committer": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Mon Dec 09 13:21:49 2013 +0100" }, "message": "arm, at91: add Siemens board taurus and axm\n\nenable support for the siemens AT91SAM9G20 based boards taurus\nand axm.\n\nSigned-off-by: Roger Meier \u003cr.meier@siemens.com\u003e\nReviewed-by: Heiko Schocher \u003chs@denx.de\u003e\nCc: Andreas Bießmann \u003candreas.devel@googlemail.com\u003e\nCc: Bo Shen \u003cvoice.shen@atmel.com\u003e\nSigned-off-by: Andreas Bießmann \u003candreas.devel@googlemail.com\u003e\n" }, { "commit": "bcf9fe37f5342aeebbf98a9e3800f578387b4fd7", "tree": "0d0ccb6727a87adee3e2ed15eb128a2bd4dbb9ab", "parents": [ "ac45bb1646e866b463405fade65bac4d877d4209" ], "author": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Fri Nov 29 12:13:46 2013 +0100" }, "committer": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Mon Dec 09 13:21:47 2013 +0100" }, "message": "at91: switch coloured LED to gpio API\n\nSigned-off-by: Andreas Bießmann \u003candreas.devel@googlemail.com\u003e\n" }, { "commit": "ac45bb1646e866b463405fade65bac4d877d4209", "tree": "0d990e984cf01e48a1e95cfc7f6cf3eaf6a661a2", "parents": [ "934e3b5240ab655782b0844989db928265e6f5df" ], "author": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Fri Nov 29 12:13:45 2013 +0100" }, "committer": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Mon Dec 09 13:21:45 2013 +0100" }, "message": "at91: nand: switch atmel_nand to generic GPIO API\n\nSigned-off-by: Andreas Bießmann \u003candreas.devel@googlemail.com\u003e\nAcked-by: Jens Scharsig (BuS Elektronik)\u003cesw@bus-elektronik.de\u003e\nTested-by: Jens Scharsig (BuS Elektronik)\u003cesw@bus-elektronik.de\u003e\nAcked-by: Scott Wood \u003cscottwood@freescale.com\u003e\n" }, { "commit": "934e3b5240ab655782b0844989db928265e6f5df", "tree": "8204df5572ede963eccbca0fa2d1645d34e6a71a", "parents": [ "9ecc922e7500036e5b7acecf2c8c98510c183560" ], "author": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Fri Nov 29 12:13:44 2013 +0100" }, "committer": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Mon Dec 09 13:21:39 2013 +0100" }, "message": "at91: redefine legacy GPIO PIN_BASE\n\nIn order to get the very same value for legacy pin definitions and new gpio\ndefinitions set the legacy PIN_BASE to 0.\n\nSigned-off-by: Andreas Bießmann \u003candreas.devel@googlemail.com\u003e\n" }, { "commit": "9ecc922e7500036e5b7acecf2c8c98510c183560", "tree": "c6e780e9ee9219fa83c057d56c9b6e270493e0da", "parents": [ "47ed5dd031d7d2c587e6afd386e79ccec1a1b7f7" ], "author": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Fri Nov 29 12:13:43 2013 +0100" }, "committer": { "name": "Andreas Bießmann", "email": "andreas.devel@googlemail.com", "time": "Mon Dec 09 13:21:26 2013 +0100" }, "message": "at91: add new gpio pin definitions\n\nThis patch define new names for GPIO pins on at91 devices. Follow up patches\nwill convert the whole infrastructure to use these new definitions.\n\nSigned-off-by: Andreas Bießmann \u003candreas.devel@googlemail.com\u003e\nTested-by: Bo Shen \u003cvoice.shen@atmel.com\u003e\n" }, { "commit": "adebb98ba12008021e75a2881deb424db0184770", "tree": "a70efe059a19e9c307739343aa64e1be14985465", "parents": [ "4520a2f28eade14b97618b37148ac615e78783df" ], "author": { "name": "Kuo-Jung Su", "email": "dantesu@faraday-tech.com", "time": "Mon Nov 25 10:51:41 2013 +0800" }, "committer": { "name": "Pantelis Antoniou", "email": "panto@antoniou-consulting.com", "time": "Sun Dec 08 14:23:05 2013 +0200" }, "message": "mmc: add Faraday FTSDC021 SDHCI controller support\n\nFaraday FTSDC021 is a controller which is compliant with\nSDHCI v3.0, SDIO v2.0 and MMC v4.3.\n\nHowever this driver is only verified with SD memory cards.\n\nSigned-off-by: Kuo-Jung Su \u003cdantesu@faraday-tech.com\u003e\nAcked-by: Pantelis Antoniou \u003cpanto@antoniou-consulting.com\u003e\nCC: Andy Fleming \u003cafleming@gmail.com\u003e\n" }, { "commit": "4520a2f28eade14b97618b37148ac615e78783df", "tree": "feb3b1f2b49a842dcc6a408ef8d705e6e8e9419a", "parents": [ "9108b315f228b464379211be26f594ea3dc82cc5" ], "author": { "name": "Priyanka Jain", "email": "Priyanka.Jain@freescale.com", "time": "Thu Nov 28 10:12:16 2013 +0530" }, "committer": { "name": "Pantelis Antoniou", "email": "panto@antoniou-consulting.com", "time": "Sun Dec 08 14:17:28 2013 +0200" }, "message": "powerpc: mmc: Add corenet devices support in esdhc spl\n\nExisting eSDHC SPL framework assumes booting from sd-image\nwith boot_format header which contains final u-boot Image\noffset and size. No such header is present in case of\ncorenet devices like T1040 as corenet deivces use PBI-RCW\nbased intialization.\n\nSo, for corenet deives, SPL bootloader use values provided\nat compilation time. These values can be defined in board\nspecific config file.\n\nSigned-off-by: Priyanka Jain \u003cPriyanka.Jain@freescale.com\u003e\nAcked-by: Pantelis Antoniou \u003cpanto@antoniou-consulting.com\u003e\n" }, { "commit": "9108b315f228b464379211be26f594ea3dc82cc5", "tree": "c7bebfc6eccdf271667a4dc65bda7809cd482007", "parents": [ "18ab67559736335d743503d92b49129e505e1baf" ], "author": { "name": "Alexey Brodkin", "email": "Alexey.Brodkin@synopsys.com", "time": "Wed Nov 27 17:00:52 2013 +0400" }, "committer": { "name": "Pantelis Antoniou", "email": "panto@antoniou-consulting.com", "time": "Sun Dec 08 14:08:47 2013 +0200" }, "message": "mmc/dwmmc: modify FIFO threshold only if value explicitly set\n\nIf platform provides \"host-\u003efifoth_val\" it will be used for\ninitialization of DWMCI_FIFOTH register. Otherwise default value will be\nused.\n\nThis implementation allows:\n * escape unclear and recursive calculations that are currently in use\n * use whatever custom value for DWMCI_FIFOTH initialization if any\nparticular SoC requires it\n\nSigned-off-by: Alexey Brodkin \u003cabrodkin@synopsys.com\u003e\n\nCc: Mischa Jonker \u003cmjonker@synopsys.com\u003e\nCc: Alim Akhtar \u003calim.akhtar@samsung.com\u003e\nCc: Rajeshwari Shinde \u003crajeshwari.s@samsung.com\u003e\nCc: Jaehoon Chung \u003cjh80.chung@samsung.com\u003e\nCc: Amar \u003camarendra.xt@samsung.com\u003e\nCc: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nCc: Minkyu Kang \u003cmk7.kang@samsung.com\u003e\nCc: Simon Glass \u003csjg@chromium.org\u003e\nCc: Pantelis Antoniou \u003cpanto@antoniou-consulting.com\u003e\nCc: Andy Fleming \u003cafleming@freescale.com\u003e\nAcked-by: Jaehoon Chung \u003cjh80.chung@samsung.com\u003e\nAcked-by: Pantelis Antoniou \u003cpanto@antoniou-consulting.com\u003e\n" }, { "commit": "18ab67559736335d743503d92b49129e505e1baf", "tree": "cbd6fa42757593994acfd12d4d7480ebf458a608", "parents": [ "f44483b57c49282299da0e5c10073b909cdad979" ], "author": { "name": "Jaehoon Chung", "email": "jh80.chung@samsung.com", "time": "Fri Nov 29 20:08:57 2013 +0900" }, "committer": { "name": "Pantelis Antoniou", "email": "panto@antoniou-consulting.com", "time": "Sun Dec 08 14:07:07 2013 +0200" }, "message": "mmc: dw_mmc: remove the exynos specific code in dw-mmc.c\n\ndw-mmc.c is the general driver file.\nSo, remove the exynos specific code at dw-mmc.c.\nInstead, exynos specific cod can be move into exynos-dw_mmc.c.\n\nSigned-off-by: Jaehoon Chung \u003cjh80.chung@samsung.com\u003e\nAcked-by: Alexey Brodkin \u003cabrodkin@synopsys.com\u003e\nAcked-by: Pantelis Antoniou \u003cpanto@antoniou-consulting.com\u003e\nAcked-by: Minkyu Kang \u003cmk7.kang@samsung.com\u003e\n" } ], "next": "47ed5dd031d7d2c587e6afd386e79ccec1a1b7f7" }