Merge tag 'gpio-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- don't clear FLAG_IS_OUT when emulating open drain/source in gpiolib
- fix up the usage of nonexclusive GPIO descriptors from device trees
- fix the incorrect IEC offset when toggling trigger edge in the
Spreadtrum driver
- use the correct unit for debounce settings in the MAX77620 driver
* tag 'gpio-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: max77620: Use correct unit for debounce times
gpio: eic: sprd: Fix the incorrect EIC offset when toggling
gpio: fix getting nonexclusive gpiods from DT
gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source
diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
index fe7a73f..bb287f3 100644
--- a/drivers/gpio/gpio-eic-sprd.c
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -530,11 +530,12 @@
}
for_each_set_bit(n, ®, SPRD_EIC_PER_BANK_NR) {
- girq = irq_find_mapping(chip->irq.domain,
- bank * SPRD_EIC_PER_BANK_NR + n);
+ u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
+
+ girq = irq_find_mapping(chip->irq.domain, offset);
generic_handle_irq(girq);
- sprd_eic_toggle_trigger(chip, girq, n);
+ sprd_eic_toggle_trigger(chip, girq, offset);
}
}
}
diff --git a/drivers/gpio/gpio-max77620.c b/drivers/gpio/gpio-max77620.c
index 47d05e3..faf86ea 100644
--- a/drivers/gpio/gpio-max77620.c
+++ b/drivers/gpio/gpio-max77620.c
@@ -192,13 +192,13 @@
case 0:
val = MAX77620_CNFG_GPIO_DBNC_None;
break;
- case 1 ... 8:
+ case 1000 ... 8000:
val = MAX77620_CNFG_GPIO_DBNC_8ms;
break;
- case 9 ... 16:
+ case 9000 ... 16000:
val = MAX77620_CNFG_GPIO_DBNC_16ms;
break;
- case 17 ... 32:
+ case 17000 ... 32000:
val = MAX77620_CNFG_GPIO_DBNC_32ms;
break;
default:
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 1eea2c6..80ea49f 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -317,7 +317,7 @@
transitory = flags & OF_GPIO_TRANSITORY;
ret = gpiod_request(desc, label);
- if (ret == -EBUSY && (flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE))
+ if (ret == -EBUSY && (dflags & GPIOD_FLAGS_BIT_NONEXCLUSIVE))
return desc;
if (ret)
return ERR_PTR(ret);
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index bdbc164..5833e4f 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3070,8 +3070,10 @@
if (!ret)
goto set_output_value;
/* Emulate open drain by not actively driving the line high */
- if (value)
- return gpiod_direction_input(desc);
+ if (value) {
+ ret = gpiod_direction_input(desc);
+ goto set_output_flag;
+ }
}
else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
@@ -3079,8 +3081,10 @@
if (!ret)
goto set_output_value;
/* Emulate open source by not actively driving the line low */
- if (!value)
- return gpiod_direction_input(desc);
+ if (!value) {
+ ret = gpiod_direction_input(desc);
+ goto set_output_flag;
+ }
} else {
gpio_set_config(gc, gpio_chip_hwgpio(desc),
PIN_CONFIG_DRIVE_PUSH_PULL);
@@ -3088,6 +3092,17 @@
set_output_value:
return gpiod_direction_output_raw_commit(desc, value);
+
+set_output_flag:
+ /*
+ * When emulating open-source or open-drain functionalities by not
+ * actively driving the line (setting mode to input) we still need to
+ * set the IS_OUT flag or otherwise we won't be able to set the line
+ * value anymore.
+ */
+ if (ret == 0)
+ set_bit(FLAG_IS_OUT, &desc->flags);
+ return ret;
}
EXPORT_SYMBOL_GPL(gpiod_direction_output);
@@ -3448,8 +3463,6 @@
if (value) {
ret = chip->direction_input(chip, offset);
- if (!ret)
- clear_bit(FLAG_IS_OUT, &desc->flags);
} else {
ret = chip->direction_output(chip, offset, 0);
if (!ret)
@@ -3479,8 +3492,6 @@
set_bit(FLAG_IS_OUT, &desc->flags);
} else {
ret = chip->direction_input(chip, offset);
- if (!ret)
- clear_bit(FLAG_IS_OUT, &desc->flags);
}
trace_gpio_direction(desc_to_gpio(desc), !value, ret);
if (ret < 0)
