Merge tag 'omap-for-v4.9/fixes-for-rc-cycle' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.9-rc cycle. Except for the omap3 fix for the SoC
features printed, all these are quite trivial and tiny. The omap5 jack
detection and gpadc patches are not strictly fixes, but I wanted to get
binding document typo fixed before it pops up on other boards. The
gpadc one liner was in the same series and I applied and pushed it out
already before noticing it could have waited. The list of changes is:
- Fix omap3 SoC features printed
- Make sure OMAP_INTERCONNECT is selected for am43xx only configurations
- Add missing memory node for torpedo
- Initialize uart4_mask properly to avoid writing garbage to PRM registers
- Fix NULL pointer dereference for omap4 volt_data
- Add alias for omap5 gpadc needed by iio drivers
- Enable omap5 jack headset jack detection and fix it's binding typo
- Add missing memory node for logicpd-som-lv
- Fix wrong SMPS6 voltage for VDD-DDR3 for omap5
* tag 'omap-for-v4.9/fixes-for-rc-cycle' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
ARM: omap3: Add missing memory node in SOM-LV
ASoC: omap-abe-twl6040: fix typo in bindings documentation
dts: omap5: board-common: enable twl6040 headset jack detection
dts: omap5: board-common: add phandle to reference Palmas gpadc
ARM: OMAP2+: avoid NULL pointer dereference
ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
ARM: dts: omap3: Fix memory node in Torpedo board
ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
ARM: OMAP3: Fix formatting of features printed
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
index fd40c85..462b04e8 100644
--- a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
+++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
@@ -12,7 +12,7 @@
Optional properties:
- ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be present if the board capable to detect jack
+- ti,jack-detection: Need to be present if the board capable to detect jack
insertion, removal.
Available audio endpoints for the audio-routing table:
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 0ff1c2d..26cce4d 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -13,6 +13,11 @@
};
};
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0>;
+ };
+
wl12xx_vmmc: wl12xx_vmmc {
compatible = "regulator-fixed";
regulator-name = "vwl1271";
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 731ec37..8f9a69c 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -13,9 +13,9 @@
};
};
- memory@0 {
+ memory@80000000 {
device_type = "memory";
- reg = <0 0>;
+ reg = <0x80000000 0>;
};
leds {
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 6365635..4caadb2 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -124,6 +124,7 @@
compatible = "ti,abe-twl6040";
ti,model = "omap5-uevm";
+ ti,jack-detection;
ti,mclk-freq = <19200000>;
ti,mcpdm = <&mcpdm>;
@@ -415,7 +416,7 @@
ti,backup-battery-charge-high-current;
};
- gpadc {
+ gpadc: gpadc {
compatible = "ti,palmas-gpadc";
interrupts = <18 0
16 0
@@ -475,8 +476,8 @@
smps6_reg: smps6 {
/* VDD_DDR3 - over VDD_SMPS6 */
regulator-name = "smps6";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a9afeeb..0465338 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -71,6 +71,7 @@
select HAVE_ARM_TWD
select ARM_ERRATA_754322
select ARM_ERRATA_775420
+ select OMAP_INTERCONNECT
config SOC_DRA7XX
bool "TI DRA7XX"
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2abd53a..cc6d9fa 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -205,11 +205,15 @@
#define OMAP3_SHOW_FEATURE(feat) \
if (omap3_has_ ##feat()) \
- printk(#feat" ");
+ n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
static void __init omap3_cpuinfo(void)
{
const char *cpu_name;
+ char buf[64];
+ int n = 0;
+
+ memset(buf, 0, sizeof(buf));
/*
* OMAP3430 and OMAP3530 are assumed to be same.
@@ -241,10 +245,10 @@
cpu_name = "OMAP3503";
}
- sprintf(soc_name, "%s", cpu_name);
+ scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name);
/* Print verbose information */
- pr_info("%s %s (", soc_name, soc_rev);
+ n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev);
OMAP3_SHOW_FEATURE(l2cache);
OMAP3_SHOW_FEATURE(iva);
@@ -252,8 +256,10 @@
OMAP3_SHOW_FEATURE(neon);
OMAP3_SHOW_FEATURE(isp);
OMAP3_SHOW_FEATURE(192mhz_clk);
-
- printk(")\n");
+ if (*(buf + n - 1) == ' ')
+ n--;
+ n += scnprintf(buf + n, sizeof(buf) - n, ")\n");
+ pr_info("%s", buf);
}
#define OMAP3_CHECK_FEATURE(status,feat) \
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 62680aa..718981b 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -319,6 +319,9 @@
if (has_uart4) {
en_uart4_mask = OMAP3630_EN_UART4_MASK;
grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
+ } else {
+ en_uart4_mask = 0;
+ grpsel_uart4_mask = 0;
}
/* Enable wakeups in PER */
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index cba8cad..cd15dbd 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -87,6 +87,12 @@
return -ENODATA;
}
+ if (!voltdm->volt_data) {
+ pr_err("%s: No voltage data defined for vdd_%s\n",
+ __func__, voltdm->name);
+ return -ENODATA;
+ }
+
/* Adjust voltage to the exact voltage from the OPP table */
for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
if (voltdm->volt_data[i].volt_nominal >= target_volt) {
