blob: 55183d360032ceffdc88972db0b82506fd86a495 [file] [log] [blame]
BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
Required properties:
- compatible: should be "boe,hv070wsa-100"
- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
- enable-gpios: GPIO pin to enable and disable panel (active high)
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
The device node can contain one 'port' child node with one child
'endpoint' node, according to the bindings defined in [1]. This
node should describe panel's video bus.
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
panel: panel {
compatible = "boe,hv070wsa-100";
power-supply = <&vcc_3v3_reg>;
enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
port {
panel_ep: endpoint {
remote-endpoint = <&bridge_out_ep>;