| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Enable PCIe link L0s/L1 state and Clock Power Management | |
| * | |
| * Copyright (C) 2007 Intel | |
| * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) | |
| * Copyright (C) Shaohua Li (shaohua.li@intel.com) | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/bits.h> | |
| #include <linux/build_bug.h> | |
| #include <linux/kernel.h> | |
| #include <linux/limits.h> | |
| #include <linux/math.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/of.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci_regs.h> | |
| #include <linux/errno.h> | |
| #include <linux/pm.h> | |
| #include <linux/init.h> | |
| #include <linux/printk.h> | |
| #include <linux/slab.h> | |
| #include <linux/time.h> | |
| #include "../pci.h" | |
| void pci_save_ltr_state(struct pci_dev *dev) | |
| { | |
| int ltr; | |
| struct pci_cap_saved_state *save_state; | |
| u32 *cap; | |
| if (!pci_is_pcie(dev)) | |
| return; | |
| ltr = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_LTR); | |
| if (!ltr) | |
| return; | |
| save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_LTR); | |
| if (!save_state) { | |
| pci_err(dev, "no suspend buffer for LTR; ASPM issues possible after resume\n"); | |
| return; | |
| } | |
| /* Some broken devices only support dword access to LTR */ | |
| cap = &save_state->cap.data[0]; | |
| pci_read_config_dword(dev, ltr + PCI_LTR_MAX_SNOOP_LAT, cap); | |
| } | |
| void pci_restore_ltr_state(struct pci_dev *dev) | |
| { | |
| struct pci_cap_saved_state *save_state; | |
| int ltr; | |
| u32 *cap; | |
| save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_LTR); | |
| ltr = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_LTR); | |
| if (!save_state || !ltr) | |
| return; | |
| /* Some broken devices only support dword access to LTR */ | |
| cap = &save_state->cap.data[0]; | |
| pci_write_config_dword(dev, ltr + PCI_LTR_MAX_SNOOP_LAT, *cap); | |
| } | |
| void pci_configure_aspm_l1ss(struct pci_dev *pdev) | |
| { | |
| int rc; | |
| pdev->l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS); | |
| rc = pci_add_ext_cap_save_buffer(pdev, PCI_EXT_CAP_ID_L1SS, | |
| 2 * sizeof(u32)); | |
| if (rc) | |
| pci_err(pdev, "unable to allocate ASPM L1SS save buffer (%pe)\n", | |
| ERR_PTR(rc)); | |
| } | |
| void pci_save_aspm_l1ss_state(struct pci_dev *pdev) | |
| { | |
| struct pci_dev *parent = pdev->bus->self; | |
| struct pci_cap_saved_state *save_state; | |
| u32 *cap; | |
| /* | |
| * If this is a Downstream Port, we never restore the L1SS state | |
| * directly; we only restore it when we restore the state of the | |
| * Upstream Port below it. | |
| */ | |
| if (pcie_downstream_port(pdev) || !parent) | |
| return; | |
| if (!pdev->l1ss || !parent->l1ss) | |
| return; | |
| /* | |
| * Save L1 substate configuration. The ASPM L0s/L1 configuration | |
| * in PCI_EXP_LNKCTL_ASPMC is saved by pci_save_pcie_state(). | |
| */ | |
| save_state = pci_find_saved_ext_cap(pdev, PCI_EXT_CAP_ID_L1SS); | |
| if (!save_state) | |
| return; | |
| cap = &save_state->cap.data[0]; | |
| pci_read_config_dword(pdev, pdev->l1ss + PCI_L1SS_CTL2, cap++); | |
| pci_read_config_dword(pdev, pdev->l1ss + PCI_L1SS_CTL1, cap++); | |
| /* | |
| * Save parent's L1 substate configuration so we have it for | |
| * pci_restore_aspm_l1ss_state(pdev) to restore. | |
| */ | |
| save_state = pci_find_saved_ext_cap(parent, PCI_EXT_CAP_ID_L1SS); | |
| if (!save_state) | |
| return; | |
| cap = &save_state->cap.data[0]; | |
| pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, cap++); | |
| pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, cap++); | |
| } | |
| void pci_restore_aspm_l1ss_state(struct pci_dev *pdev) | |
| { | |
| struct pci_cap_saved_state *pl_save_state, *cl_save_state; | |
| struct pci_dev *parent = pdev->bus->self; | |
| u32 *cap, pl_ctl1, pl_ctl2, pl_l1_2_enable; | |
| u32 cl_ctl1, cl_ctl2, cl_l1_2_enable; | |
| u16 clnkctl, plnkctl; | |
| /* | |
| * In case BIOS enabled L1.2 when resuming, we need to disable it first | |
| * on the downstream component before the upstream. So, don't attempt to | |
| * restore either until we are at the downstream component. | |
| */ | |
| if (pcie_downstream_port(pdev) || !parent) | |
| return; | |
| if (!pdev->l1ss || !parent->l1ss) | |
| return; | |
| cl_save_state = pci_find_saved_ext_cap(pdev, PCI_EXT_CAP_ID_L1SS); | |
| pl_save_state = pci_find_saved_ext_cap(parent, PCI_EXT_CAP_ID_L1SS); | |
| if (!cl_save_state || !pl_save_state) | |
| return; | |
| cap = &cl_save_state->cap.data[0]; | |
| cl_ctl2 = *cap++; | |
| cl_ctl1 = *cap; | |
| cap = &pl_save_state->cap.data[0]; | |
| pl_ctl2 = *cap++; | |
| pl_ctl1 = *cap; | |
| /* Make sure L0s/L1 are disabled before updating L1SS config */ | |
| pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &clnkctl); | |
| pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &plnkctl); | |
| if (FIELD_GET(PCI_EXP_LNKCTL_ASPMC, clnkctl) || | |
| FIELD_GET(PCI_EXP_LNKCTL_ASPMC, plnkctl)) { | |
| pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, | |
| clnkctl & ~PCI_EXP_LNKCTL_ASPMC); | |
| pcie_capability_write_word(parent, PCI_EXP_LNKCTL, | |
| plnkctl & ~PCI_EXP_LNKCTL_ASPMC); | |
| } | |
| /* | |
| * Disable L1.2 on this downstream endpoint device first, followed | |
| * by the upstream | |
| */ | |
| pci_clear_and_set_config_dword(pdev, pdev->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_L1_2_MASK, 0); | |
| pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_L1_2_MASK, 0); | |
| /* | |
| * In addition, Common_Mode_Restore_Time and LTR_L1.2_THRESHOLD | |
| * in PCI_L1SS_CTL1 must be programmed *before* setting the L1.2 | |
| * enable bits, even though they're all in PCI_L1SS_CTL1. | |
| */ | |
| pl_l1_2_enable = pl_ctl1 & PCI_L1SS_CTL1_L1_2_MASK; | |
| pl_ctl1 &= ~PCI_L1SS_CTL1_L1_2_MASK; | |
| cl_l1_2_enable = cl_ctl1 & PCI_L1SS_CTL1_L1_2_MASK; | |
| cl_ctl1 &= ~PCI_L1SS_CTL1_L1_2_MASK; | |
| /* Write back without enables first (above we cleared them in ctl1) */ | |
| pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, pl_ctl2); | |
| pci_write_config_dword(pdev, pdev->l1ss + PCI_L1SS_CTL2, cl_ctl2); | |
| pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, pl_ctl1); | |
| pci_write_config_dword(pdev, pdev->l1ss + PCI_L1SS_CTL1, cl_ctl1); | |
| /* Then write back the enables */ | |
| if (pl_l1_2_enable || cl_l1_2_enable) { | |
| pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, | |
| pl_ctl1 | pl_l1_2_enable); | |
| pci_write_config_dword(pdev, pdev->l1ss + PCI_L1SS_CTL1, | |
| cl_ctl1 | cl_l1_2_enable); | |
| } | |
| /* Restore L0s/L1 if they were enabled */ | |
| if (FIELD_GET(PCI_EXP_LNKCTL_ASPMC, clnkctl) || | |
| FIELD_GET(PCI_EXP_LNKCTL_ASPMC, plnkctl)) { | |
| pcie_capability_write_word(parent, PCI_EXP_LNKCTL, plnkctl); | |
| pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, clnkctl); | |
| } | |
| } | |
| #ifdef CONFIG_PCIEASPM | |
| #ifdef MODULE_PARAM_PREFIX | |
| #undef MODULE_PARAM_PREFIX | |
| #endif | |
| #define MODULE_PARAM_PREFIX "pcie_aspm." | |
| /* Note: these are not register definitions */ | |
| #define PCIE_LINK_STATE_L0S_UP BIT(0) /* Upstream direction L0s state */ | |
| #define PCIE_LINK_STATE_L0S_DW BIT(1) /* Downstream direction L0s state */ | |
| static_assert(PCIE_LINK_STATE_L0S == (PCIE_LINK_STATE_L0S_UP | PCIE_LINK_STATE_L0S_DW)); | |
| #define PCIE_LINK_STATE_L1_SS_PCIPM (PCIE_LINK_STATE_L1_1_PCIPM |\ | |
| PCIE_LINK_STATE_L1_2_PCIPM) | |
| #define PCIE_LINK_STATE_L1_2_MASK (PCIE_LINK_STATE_L1_2 |\ | |
| PCIE_LINK_STATE_L1_2_PCIPM) | |
| #define PCIE_LINK_STATE_L1SS (PCIE_LINK_STATE_L1_1 |\ | |
| PCIE_LINK_STATE_L1_1_PCIPM |\ | |
| PCIE_LINK_STATE_L1_2_MASK) | |
| struct pcie_link_state { | |
| struct pci_dev *pdev; /* Upstream component of the Link */ | |
| struct pci_dev *downstream; /* Downstream component, function 0 */ | |
| struct pcie_link_state *root; /* pointer to the root port link */ | |
| struct pcie_link_state *parent; /* pointer to the parent Link state */ | |
| struct list_head sibling; /* node in link_list */ | |
| /* ASPM state */ | |
| u32 aspm_support:7; /* Supported ASPM state */ | |
| u32 aspm_enabled:7; /* Enabled ASPM state */ | |
| u32 aspm_capable:7; /* Capable ASPM state with latency */ | |
| u32 aspm_default:7; /* Default ASPM state by BIOS or | |
| override */ | |
| u32 aspm_disable:7; /* Disabled ASPM state */ | |
| /* Clock PM state */ | |
| u32 clkpm_capable:1; /* Clock PM capable? */ | |
| u32 clkpm_enabled:1; /* Current Clock PM state */ | |
| u32 clkpm_default:1; /* Default Clock PM state by BIOS */ | |
| u32 clkpm_disable:1; /* Clock PM disabled */ | |
| }; | |
| static bool aspm_disabled, aspm_force; | |
| static bool aspm_support_enabled = true; | |
| static DEFINE_MUTEX(aspm_lock); | |
| static LIST_HEAD(link_list); | |
| #define POLICY_DEFAULT 0 /* BIOS default setting */ | |
| #define POLICY_PERFORMANCE 1 /* high performance */ | |
| #define POLICY_POWERSAVE 2 /* high power saving */ | |
| #define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */ | |
| #ifdef CONFIG_PCIEASPM_PERFORMANCE | |
| static int aspm_policy = POLICY_PERFORMANCE; | |
| #elif defined CONFIG_PCIEASPM_POWERSAVE | |
| static int aspm_policy = POLICY_POWERSAVE; | |
| #elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE | |
| static int aspm_policy = POLICY_POWER_SUPERSAVE; | |
| #else | |
| static int aspm_policy; | |
| #endif | |
| static const char *policy_str[] = { | |
| [POLICY_DEFAULT] = "default", | |
| [POLICY_PERFORMANCE] = "performance", | |
| [POLICY_POWERSAVE] = "powersave", | |
| [POLICY_POWER_SUPERSAVE] = "powersupersave" | |
| }; | |
| /* | |
| * The L1 PM substate capability is only implemented in function 0 in a | |
| * multi function device. | |
| */ | |
| static struct pci_dev *pci_function_0(struct pci_bus *linkbus) | |
| { | |
| struct pci_dev *child; | |
| list_for_each_entry(child, &linkbus->devices, bus_list) | |
| if (PCI_FUNC(child->devfn) == 0) | |
| return child; | |
| return NULL; | |
| } | |
| static int policy_to_aspm_state(struct pcie_link_state *link) | |
| { | |
| switch (aspm_policy) { | |
| case POLICY_PERFORMANCE: | |
| /* Disable ASPM and Clock PM */ | |
| return 0; | |
| case POLICY_POWERSAVE: | |
| /* Enable ASPM L0s/L1 */ | |
| return PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1; | |
| case POLICY_POWER_SUPERSAVE: | |
| /* Enable Everything */ | |
| return PCIE_LINK_STATE_ASPM_ALL; | |
| case POLICY_DEFAULT: | |
| return link->aspm_default; | |
| } | |
| return 0; | |
| } | |
| static int policy_to_clkpm_state(struct pcie_link_state *link) | |
| { | |
| switch (aspm_policy) { | |
| case POLICY_PERFORMANCE: | |
| /* Disable ASPM and Clock PM */ | |
| return 0; | |
| case POLICY_POWERSAVE: | |
| case POLICY_POWER_SUPERSAVE: | |
| /* Enable Clock PM */ | |
| return 1; | |
| case POLICY_DEFAULT: | |
| return link->clkpm_default; | |
| } | |
| return 0; | |
| } | |
| static void pci_update_aspm_saved_state(struct pci_dev *dev) | |
| { | |
| struct pci_cap_saved_state *save_state; | |
| u16 *cap, lnkctl, aspm_ctl; | |
| save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP); | |
| if (!save_state) | |
| return; | |
| pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &lnkctl); | |
| /* | |
| * Update ASPM and CLKREQ bits of LNKCTL in save_state. We only | |
| * write PCI_EXP_LNKCTL_CCC during enumeration, so it shouldn't | |
| * change after being captured in save_state. | |
| */ | |
| aspm_ctl = lnkctl & (PCI_EXP_LNKCTL_ASPMC | PCI_EXP_LNKCTL_CLKREQ_EN); | |
| lnkctl &= ~(PCI_EXP_LNKCTL_ASPMC | PCI_EXP_LNKCTL_CLKREQ_EN); | |
| /* Depends on pci_save_pcie_state(): cap[1] is LNKCTL */ | |
| cap = (u16 *)&save_state->cap.data[0]; | |
| cap[1] = lnkctl | aspm_ctl; | |
| } | |
| static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable) | |
| { | |
| struct pci_dev *child; | |
| struct pci_bus *linkbus = link->pdev->subordinate; | |
| u32 val = enable ? PCI_EXP_LNKCTL_CLKREQ_EN : 0; | |
| list_for_each_entry(child, &linkbus->devices, bus_list) { | |
| pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL, | |
| PCI_EXP_LNKCTL_CLKREQ_EN, | |
| val); | |
| pci_update_aspm_saved_state(child); | |
| } | |
| link->clkpm_enabled = !!enable; | |
| } | |
| static void pcie_set_clkpm(struct pcie_link_state *link, int enable) | |
| { | |
| /* | |
| * Don't enable Clock PM if the link is not Clock PM capable | |
| * or Clock PM is disabled | |
| */ | |
| if (!link->clkpm_capable || link->clkpm_disable) | |
| enable = 0; | |
| /* Need nothing if the specified equals to current state */ | |
| if (link->clkpm_enabled == enable) | |
| return; | |
| pcie_set_clkpm_nocheck(link, enable); | |
| } | |
| static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist) | |
| { | |
| int capable = 1, enabled = 1; | |
| u32 reg32; | |
| u16 reg16; | |
| struct pci_dev *child; | |
| struct pci_bus *linkbus = link->pdev->subordinate; | |
| /* All functions should have the same cap and state, take the worst */ | |
| list_for_each_entry(child, &linkbus->devices, bus_list) { | |
| pcie_capability_read_dword(child, PCI_EXP_LNKCAP, ®32); | |
| if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) { | |
| capable = 0; | |
| enabled = 0; | |
| break; | |
| } | |
| pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16); | |
| if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN)) | |
| enabled = 0; | |
| } | |
| link->clkpm_enabled = enabled; | |
| link->clkpm_default = enabled; | |
| link->clkpm_capable = capable; | |
| link->clkpm_disable = blacklist ? 1 : 0; | |
| } | |
| /* | |
| * pcie_aspm_configure_common_clock: check if the 2 ends of a link | |
| * could use common clock. If they are, configure them to use the | |
| * common clock. That will reduce the ASPM state exit latency. | |
| */ | |
| static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) | |
| { | |
| int same_clock = 1; | |
| u16 reg16, ccc, parent_old_ccc, child_old_ccc[8]; | |
| struct pci_dev *child, *parent = link->pdev; | |
| struct pci_bus *linkbus = parent->subordinate; | |
| /* | |
| * All functions of a slot should have the same Slot Clock | |
| * Configuration, so just check one function | |
| */ | |
| child = list_entry(linkbus->devices.next, struct pci_dev, bus_list); | |
| BUG_ON(!pci_is_pcie(child)); | |
| /* Check downstream component if bit Slot Clock Configuration is 1 */ | |
| pcie_capability_read_word(child, PCI_EXP_LNKSTA, ®16); | |
| if (!(reg16 & PCI_EXP_LNKSTA_SLC)) | |
| same_clock = 0; | |
| /* Check upstream component if bit Slot Clock Configuration is 1 */ | |
| pcie_capability_read_word(parent, PCI_EXP_LNKSTA, ®16); | |
| if (!(reg16 & PCI_EXP_LNKSTA_SLC)) | |
| same_clock = 0; | |
| /* Port might be already in common clock mode */ | |
| pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16); | |
| parent_old_ccc = reg16 & PCI_EXP_LNKCTL_CCC; | |
| if (same_clock && (reg16 & PCI_EXP_LNKCTL_CCC)) { | |
| bool consistent = true; | |
| list_for_each_entry(child, &linkbus->devices, bus_list) { | |
| pcie_capability_read_word(child, PCI_EXP_LNKCTL, | |
| ®16); | |
| if (!(reg16 & PCI_EXP_LNKCTL_CCC)) { | |
| consistent = false; | |
| break; | |
| } | |
| } | |
| if (consistent) | |
| return; | |
| pci_info(parent, "ASPM: current common clock configuration is inconsistent, reconfiguring\n"); | |
| } | |
| ccc = same_clock ? PCI_EXP_LNKCTL_CCC : 0; | |
| /* Configure downstream component, all functions */ | |
| list_for_each_entry(child, &linkbus->devices, bus_list) { | |
| pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16); | |
| child_old_ccc[PCI_FUNC(child->devfn)] = reg16 & PCI_EXP_LNKCTL_CCC; | |
| pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL, | |
| PCI_EXP_LNKCTL_CCC, ccc); | |
| } | |
| /* Configure upstream component */ | |
| pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL, | |
| PCI_EXP_LNKCTL_CCC, ccc); | |
| if (pcie_retrain_link(link->pdev, true)) { | |
| /* Training failed. Restore common clock configurations */ | |
| pci_err(parent, "ASPM: Could not configure common clock\n"); | |
| list_for_each_entry(child, &linkbus->devices, bus_list) | |
| pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL, | |
| PCI_EXP_LNKCTL_CCC, | |
| child_old_ccc[PCI_FUNC(child->devfn)]); | |
| pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL, | |
| PCI_EXP_LNKCTL_CCC, parent_old_ccc); | |
| } | |
| } | |
| /* Convert L0s latency encoding to ns */ | |
| static u32 calc_l0s_latency(u32 lnkcap) | |
| { | |
| u32 encoding = FIELD_GET(PCI_EXP_LNKCAP_L0SEL, lnkcap); | |
| if (encoding == 0x7) | |
| return 5 * NSEC_PER_USEC; /* > 4us */ | |
| return (64 << encoding); | |
| } | |
| /* Convert L0s acceptable latency encoding to ns */ | |
| static u32 calc_l0s_acceptable(u32 encoding) | |
| { | |
| if (encoding == 0x7) | |
| return U32_MAX; | |
| return (64 << encoding); | |
| } | |
| /* Convert L1 latency encoding to ns */ | |
| static u32 calc_l1_latency(u32 lnkcap) | |
| { | |
| u32 encoding = FIELD_GET(PCI_EXP_LNKCAP_L1EL, lnkcap); | |
| if (encoding == 0x7) | |
| return 65 * NSEC_PER_USEC; /* > 64us */ | |
| return NSEC_PER_USEC << encoding; | |
| } | |
| /* Convert L1 acceptable latency encoding to ns */ | |
| static u32 calc_l1_acceptable(u32 encoding) | |
| { | |
| if (encoding == 0x7) | |
| return U32_MAX; | |
| return NSEC_PER_USEC << encoding; | |
| } | |
| /* Convert L1SS T_pwr encoding to usec */ | |
| static u32 calc_l12_pwron(struct pci_dev *pdev, u32 scale, u32 val) | |
| { | |
| switch (scale) { | |
| case 0: | |
| return val * 2; | |
| case 1: | |
| return val * 10; | |
| case 2: | |
| return val * 100; | |
| } | |
| pci_err(pdev, "%s: Invalid T_PwrOn scale: %u\n", __func__, scale); | |
| return 0; | |
| } | |
| /* | |
| * Encode an LTR_L1.2_THRESHOLD value for the L1 PM Substates Control 1 | |
| * register. Ports enter L1.2 when the most recent LTR value is greater | |
| * than or equal to LTR_L1.2_THRESHOLD, so we round up to make sure we | |
| * don't enter L1.2 too aggressively. | |
| * | |
| * See PCIe r6.0, sec 5.5.1, 6.18, 7.8.3.3. | |
| */ | |
| static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value) | |
| { | |
| u64 threshold_ns = (u64)threshold_us * NSEC_PER_USEC; | |
| /* | |
| * LTR_L1.2_THRESHOLD_Value ("value") is a 10-bit field with max | |
| * value of 0x3ff. | |
| */ | |
| if (threshold_ns <= 1 * FIELD_MAX(PCI_L1SS_CTL1_LTR_L12_TH_VALUE)) { | |
| *scale = 0; /* Value times 1ns */ | |
| *value = threshold_ns; | |
| } else if (threshold_ns <= 32 * FIELD_MAX(PCI_L1SS_CTL1_LTR_L12_TH_VALUE)) { | |
| *scale = 1; /* Value times 32ns */ | |
| *value = roundup(threshold_ns, 32) / 32; | |
| } else if (threshold_ns <= 1024 * FIELD_MAX(PCI_L1SS_CTL1_LTR_L12_TH_VALUE)) { | |
| *scale = 2; /* Value times 1024ns */ | |
| *value = roundup(threshold_ns, 1024) / 1024; | |
| } else if (threshold_ns <= 32768 * FIELD_MAX(PCI_L1SS_CTL1_LTR_L12_TH_VALUE)) { | |
| *scale = 3; /* Value times 32768ns */ | |
| *value = roundup(threshold_ns, 32768) / 32768; | |
| } else if (threshold_ns <= 1048576 * FIELD_MAX(PCI_L1SS_CTL1_LTR_L12_TH_VALUE)) { | |
| *scale = 4; /* Value times 1048576ns */ | |
| *value = roundup(threshold_ns, 1048576) / 1048576; | |
| } else if (threshold_ns <= (u64)33554432 * FIELD_MAX(PCI_L1SS_CTL1_LTR_L12_TH_VALUE)) { | |
| *scale = 5; /* Value times 33554432ns */ | |
| *value = roundup(threshold_ns, 33554432) / 33554432; | |
| } else { | |
| *scale = 5; | |
| *value = FIELD_MAX(PCI_L1SS_CTL1_LTR_L12_TH_VALUE); | |
| } | |
| } | |
| static void pcie_aspm_check_latency(struct pci_dev *endpoint) | |
| { | |
| u32 latency, encoding, lnkcap_up, lnkcap_dw; | |
| u32 l1_switch_latency = 0, latency_up_l0s; | |
| u32 latency_up_l1, latency_dw_l0s, latency_dw_l1; | |
| u32 acceptable_l0s, acceptable_l1; | |
| struct pcie_link_state *link; | |
| /* Device not in D0 doesn't need latency check */ | |
| if ((endpoint->current_state != PCI_D0) && | |
| (endpoint->current_state != PCI_UNKNOWN)) | |
| return; | |
| link = endpoint->bus->self->link_state; | |
| /* Calculate endpoint L0s acceptable latency */ | |
| encoding = FIELD_GET(PCI_EXP_DEVCAP_L0S, endpoint->devcap); | |
| acceptable_l0s = calc_l0s_acceptable(encoding); | |
| /* Calculate endpoint L1 acceptable latency */ | |
| encoding = FIELD_GET(PCI_EXP_DEVCAP_L1, endpoint->devcap); | |
| acceptable_l1 = calc_l1_acceptable(encoding); | |
| while (link) { | |
| struct pci_dev *dev = pci_function_0(link->pdev->subordinate); | |
| /* Read direction exit latencies */ | |
| pcie_capability_read_dword(link->pdev, PCI_EXP_LNKCAP, | |
| &lnkcap_up); | |
| pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, | |
| &lnkcap_dw); | |
| latency_up_l0s = calc_l0s_latency(lnkcap_up); | |
| latency_up_l1 = calc_l1_latency(lnkcap_up); | |
| latency_dw_l0s = calc_l0s_latency(lnkcap_dw); | |
| latency_dw_l1 = calc_l1_latency(lnkcap_dw); | |
| /* Check upstream direction L0s latency */ | |
| if ((link->aspm_capable & PCIE_LINK_STATE_L0S_UP) && | |
| (latency_up_l0s > acceptable_l0s)) | |
| link->aspm_capable &= ~PCIE_LINK_STATE_L0S_UP; | |
| /* Check downstream direction L0s latency */ | |
| if ((link->aspm_capable & PCIE_LINK_STATE_L0S_DW) && | |
| (latency_dw_l0s > acceptable_l0s)) | |
| link->aspm_capable &= ~PCIE_LINK_STATE_L0S_DW; | |
| /* | |
| * Check L1 latency. | |
| * Every switch on the path to root complex need 1 | |
| * more microsecond for L1. Spec doesn't mention L0s. | |
| * | |
| * The exit latencies for L1 substates are not advertised | |
| * by a device. Since the spec also doesn't mention a way | |
| * to determine max latencies introduced by enabling L1 | |
| * substates on the components, it is not clear how to do | |
| * a L1 substate exit latency check. We assume that the | |
| * L1 exit latencies advertised by a device include L1 | |
| * substate latencies (and hence do not do any check). | |
| */ | |
| latency = max_t(u32, latency_up_l1, latency_dw_l1); | |
| if ((link->aspm_capable & PCIE_LINK_STATE_L1) && | |
| (latency + l1_switch_latency > acceptable_l1)) | |
| link->aspm_capable &= ~PCIE_LINK_STATE_L1; | |
| l1_switch_latency += NSEC_PER_USEC; | |
| link = link->parent; | |
| } | |
| } | |
| /* Calculate L1.2 PM substate timing parameters */ | |
| static void aspm_calc_l12_info(struct pcie_link_state *link, | |
| u32 parent_l1ss_cap, u32 child_l1ss_cap) | |
| { | |
| struct pci_dev *child = link->downstream, *parent = link->pdev; | |
| u32 val1, val2, scale1, scale2; | |
| u32 t_common_mode, t_power_on, l1_2_threshold, scale, value; | |
| u32 ctl1 = 0, ctl2 = 0; | |
| u32 pctl1, pctl2, cctl1, cctl2; | |
| u32 pl1_2_enables, cl1_2_enables; | |
| /* Choose the greater of the two Port Common_Mode_Restore_Times */ | |
| val1 = FIELD_GET(PCI_L1SS_CAP_CM_RESTORE_TIME, parent_l1ss_cap); | |
| val2 = FIELD_GET(PCI_L1SS_CAP_CM_RESTORE_TIME, child_l1ss_cap); | |
| t_common_mode = max(val1, val2); | |
| /* Choose the greater of the two Port T_POWER_ON times */ | |
| val1 = FIELD_GET(PCI_L1SS_CAP_P_PWR_ON_VALUE, parent_l1ss_cap); | |
| scale1 = FIELD_GET(PCI_L1SS_CAP_P_PWR_ON_SCALE, parent_l1ss_cap); | |
| val2 = FIELD_GET(PCI_L1SS_CAP_P_PWR_ON_VALUE, child_l1ss_cap); | |
| scale2 = FIELD_GET(PCI_L1SS_CAP_P_PWR_ON_SCALE, child_l1ss_cap); | |
| if (calc_l12_pwron(parent, scale1, val1) > | |
| calc_l12_pwron(child, scale2, val2)) { | |
| ctl2 |= FIELD_PREP(PCI_L1SS_CTL2_T_PWR_ON_SCALE, scale1) | | |
| FIELD_PREP(PCI_L1SS_CTL2_T_PWR_ON_VALUE, val1); | |
| t_power_on = calc_l12_pwron(parent, scale1, val1); | |
| } else { | |
| ctl2 |= FIELD_PREP(PCI_L1SS_CTL2_T_PWR_ON_SCALE, scale2) | | |
| FIELD_PREP(PCI_L1SS_CTL2_T_PWR_ON_VALUE, val2); | |
| t_power_on = calc_l12_pwron(child, scale2, val2); | |
| } | |
| /* | |
| * Set LTR_L1.2_THRESHOLD to the time required to transition the | |
| * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if | |
| * downstream devices report (via LTR) that they can tolerate at | |
| * least that much latency. | |
| * | |
| * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and | |
| * Table 5-11. T(POWER_OFF) is at most 2us and T(L1.2) is at | |
| * least 4us. | |
| */ | |
| l1_2_threshold = 2 + 4 + t_common_mode + t_power_on; | |
| encode_l12_threshold(l1_2_threshold, &scale, &value); | |
| ctl1 |= FIELD_PREP(PCI_L1SS_CTL1_CM_RESTORE_TIME, t_common_mode) | | |
| FIELD_PREP(PCI_L1SS_CTL1_LTR_L12_TH_VALUE, value) | | |
| FIELD_PREP(PCI_L1SS_CTL1_LTR_L12_TH_SCALE, scale); | |
| /* Some broken devices only support dword access to L1 SS */ | |
| pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1); | |
| pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, &pctl2); | |
| pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, &cctl1); | |
| pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL2, &cctl2); | |
| if (ctl1 == pctl1 && ctl1 == cctl1 && | |
| ctl2 == pctl2 && ctl2 == cctl2) | |
| return; | |
| /* Disable L1.2 while updating. See PCIe r5.0, sec 5.5.4, 7.8.3.3 */ | |
| pl1_2_enables = pctl1 & PCI_L1SS_CTL1_L1_2_MASK; | |
| cl1_2_enables = cctl1 & PCI_L1SS_CTL1_L1_2_MASK; | |
| if (pl1_2_enables || cl1_2_enables) { | |
| pci_clear_and_set_config_dword(child, | |
| child->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_L1_2_MASK, 0); | |
| pci_clear_and_set_config_dword(parent, | |
| parent->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_L1_2_MASK, 0); | |
| } | |
| /* Program T_POWER_ON times in both ports */ | |
| pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, ctl2); | |
| pci_write_config_dword(child, child->l1ss + PCI_L1SS_CTL2, ctl2); | |
| /* Program Common_Mode_Restore_Time in upstream device */ | |
| pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_CM_RESTORE_TIME, ctl1); | |
| /* Program LTR_L1.2_THRESHOLD time in both ports */ | |
| pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_LTR_L12_TH_VALUE | | |
| PCI_L1SS_CTL1_LTR_L12_TH_SCALE, | |
| ctl1); | |
| pci_clear_and_set_config_dword(child, child->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_LTR_L12_TH_VALUE | | |
| PCI_L1SS_CTL1_LTR_L12_TH_SCALE, | |
| ctl1); | |
| if (pl1_2_enables || cl1_2_enables) { | |
| pci_clear_and_set_config_dword(parent, | |
| parent->l1ss + PCI_L1SS_CTL1, 0, | |
| pl1_2_enables); | |
| pci_clear_and_set_config_dword(child, | |
| child->l1ss + PCI_L1SS_CTL1, 0, | |
| cl1_2_enables); | |
| } | |
| } | |
| static void aspm_l1ss_init(struct pcie_link_state *link) | |
| { | |
| struct pci_dev *child = link->downstream, *parent = link->pdev; | |
| u32 parent_l1ss_cap, child_l1ss_cap; | |
| u32 parent_l1ss_ctl1 = 0, child_l1ss_ctl1 = 0; | |
| if (!parent->l1ss || !child->l1ss) | |
| return; | |
| /* Setup L1 substate */ | |
| pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CAP, | |
| &parent_l1ss_cap); | |
| pci_read_config_dword(child, child->l1ss + PCI_L1SS_CAP, | |
| &child_l1ss_cap); | |
| if (!(parent_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS)) | |
| parent_l1ss_cap = 0; | |
| if (!(child_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS)) | |
| child_l1ss_cap = 0; | |
| /* | |
| * If we don't have LTR for the entire path from the Root Complex | |
| * to this device, we can't use ASPM L1.2 because it relies on the | |
| * LTR_L1.2_THRESHOLD. See PCIe r4.0, secs 5.5.4, 6.18. | |
| */ | |
| if (!child->ltr_path) | |
| child_l1ss_cap &= ~PCI_L1SS_CAP_ASPM_L1_2; | |
| if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1) | |
| link->aspm_support |= PCIE_LINK_STATE_L1_1; | |
| if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2) | |
| link->aspm_support |= PCIE_LINK_STATE_L1_2; | |
| if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1) | |
| link->aspm_support |= PCIE_LINK_STATE_L1_1_PCIPM; | |
| if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2) | |
| link->aspm_support |= PCIE_LINK_STATE_L1_2_PCIPM; | |
| if (parent_l1ss_cap) | |
| pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, | |
| &parent_l1ss_ctl1); | |
| if (child_l1ss_cap) | |
| pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, | |
| &child_l1ss_ctl1); | |
| if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1) | |
| link->aspm_enabled |= PCIE_LINK_STATE_L1_1; | |
| if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2) | |
| link->aspm_enabled |= PCIE_LINK_STATE_L1_2; | |
| if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1) | |
| link->aspm_enabled |= PCIE_LINK_STATE_L1_1_PCIPM; | |
| if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2) | |
| link->aspm_enabled |= PCIE_LINK_STATE_L1_2_PCIPM; | |
| if (link->aspm_support & PCIE_LINK_STATE_L1_2_MASK) | |
| aspm_calc_l12_info(link, parent_l1ss_cap, child_l1ss_cap); | |
| } | |
| #define FLAG(x, y, d) (((x) & (PCIE_LINK_STATE_##y)) ? d : "") | |
| static void pcie_aspm_override_default_link_state(struct pcie_link_state *link) | |
| { | |
| struct pci_dev *pdev = link->downstream; | |
| u32 override; | |
| /* For devicetree platforms, enable L0s and L1 by default */ | |
| if (of_have_populated_dt()) { | |
| if (link->aspm_support & PCIE_LINK_STATE_L0S) | |
| link->aspm_default |= PCIE_LINK_STATE_L0S; | |
| if (link->aspm_support & PCIE_LINK_STATE_L1) | |
| link->aspm_default |= PCIE_LINK_STATE_L1; | |
| override = link->aspm_default & ~link->aspm_enabled; | |
| if (override) | |
| pci_info(pdev, "ASPM: default states%s%s\n", | |
| FLAG(override, L0S, " L0s"), | |
| FLAG(override, L1, " L1")); | |
| } | |
| } | |
| static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) | |
| { | |
| struct pci_dev *child = link->downstream, *parent = link->pdev; | |
| u16 parent_lnkctl, child_lnkctl; | |
| struct pci_bus *linkbus = parent->subordinate; | |
| if (blacklist) { | |
| /* Set enabled/disable so that we will disable ASPM later */ | |
| link->aspm_enabled = PCIE_LINK_STATE_ASPM_ALL; | |
| link->aspm_disable = PCIE_LINK_STATE_ASPM_ALL; | |
| return; | |
| } | |
| /* | |
| * If ASPM not supported, don't mess with the clocks and link, | |
| * bail out now. | |
| */ | |
| if (!(parent->aspm_l0s_support && child->aspm_l0s_support) && | |
| !(parent->aspm_l1_support && child->aspm_l1_support)) | |
| return; | |
| /* Configure common clock before checking latencies */ | |
| pcie_aspm_configure_common_clock(link); | |
| /* | |
| * Re-read upstream/downstream components' register state after | |
| * clock configuration. L0s & L1 exit latencies in the otherwise | |
| * read-only Link Capabilities may change depending on common clock | |
| * configuration (PCIe r5.0, sec 7.5.3.6). | |
| */ | |
| pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &parent_lnkctl); | |
| pcie_capability_read_word(child, PCI_EXP_LNKCTL, &child_lnkctl); | |
| /* Disable L0s/L1 before updating L1SS config */ | |
| if (FIELD_GET(PCI_EXP_LNKCTL_ASPMC, child_lnkctl) || | |
| FIELD_GET(PCI_EXP_LNKCTL_ASPMC, parent_lnkctl)) { | |
| pcie_capability_write_word(child, PCI_EXP_LNKCTL, | |
| child_lnkctl & ~PCI_EXP_LNKCTL_ASPMC); | |
| pcie_capability_write_word(parent, PCI_EXP_LNKCTL, | |
| parent_lnkctl & ~PCI_EXP_LNKCTL_ASPMC); | |
| } | |
| /* | |
| * Setup L0s state | |
| * | |
| * Note that we must not enable L0s in either direction on a | |
| * given link unless components on both sides of the link each | |
| * support L0s. | |
| */ | |
| if (parent->aspm_l0s_support && child->aspm_l0s_support) | |
| link->aspm_support |= PCIE_LINK_STATE_L0S; | |
| if (child_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S) | |
| link->aspm_enabled |= PCIE_LINK_STATE_L0S_UP; | |
| if (parent_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S) | |
| link->aspm_enabled |= PCIE_LINK_STATE_L0S_DW; | |
| /* Setup L1 state */ | |
| if (parent->aspm_l1_support && child->aspm_l1_support) | |
| link->aspm_support |= PCIE_LINK_STATE_L1; | |
| if (parent_lnkctl & child_lnkctl & PCI_EXP_LNKCTL_ASPM_L1) | |
| link->aspm_enabled |= PCIE_LINK_STATE_L1; | |
| aspm_l1ss_init(link); | |
| /* Restore L0s/L1 if they were enabled */ | |
| if (FIELD_GET(PCI_EXP_LNKCTL_ASPMC, child_lnkctl) || | |
| FIELD_GET(PCI_EXP_LNKCTL_ASPMC, parent_lnkctl)) { | |
| pcie_capability_write_word(parent, PCI_EXP_LNKCTL, parent_lnkctl); | |
| pcie_capability_write_word(child, PCI_EXP_LNKCTL, child_lnkctl); | |
| } | |
| /* Save default state */ | |
| link->aspm_default = link->aspm_enabled; | |
| pcie_aspm_override_default_link_state(link); | |
| /* Setup initial capable state. Will be updated later */ | |
| link->aspm_capable = link->aspm_support; | |
| /* Get and check endpoint acceptable latencies */ | |
| list_for_each_entry(child, &linkbus->devices, bus_list) { | |
| if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT && | |
| pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END) | |
| continue; | |
| pcie_aspm_check_latency(child); | |
| } | |
| } | |
| /* Configure the ASPM L1 substates. Caller must disable L1 first. */ | |
| static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state) | |
| { | |
| u32 val = 0; | |
| struct pci_dev *child = link->downstream, *parent = link->pdev; | |
| if (state & PCIE_LINK_STATE_L1_1) | |
| val |= PCI_L1SS_CTL1_ASPM_L1_1; | |
| if (state & PCIE_LINK_STATE_L1_2) | |
| val |= PCI_L1SS_CTL1_ASPM_L1_2; | |
| if (state & PCIE_LINK_STATE_L1_1_PCIPM) | |
| val |= PCI_L1SS_CTL1_PCIPM_L1_1; | |
| if (state & PCIE_LINK_STATE_L1_2_PCIPM) | |
| val |= PCI_L1SS_CTL1_PCIPM_L1_2; | |
| /* | |
| * PCIe r6.2, sec 5.5.4, rules for enabling L1 PM Substates: | |
| * - Clear L1.x enable bits at child first, then at parent | |
| * - Set L1.x enable bits at parent first, then at child | |
| * - ASPM/PCIPM L1.2 must be disabled while programming timing | |
| * parameters | |
| */ | |
| /* Disable all L1 substates */ | |
| pci_clear_and_set_config_dword(child, child->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_L1SS_MASK, 0); | |
| pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_L1SS_MASK, 0); | |
| /* Enable what we need to enable */ | |
| pci_clear_and_set_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_L1SS_MASK, val); | |
| pci_clear_and_set_config_dword(child, child->l1ss + PCI_L1SS_CTL1, | |
| PCI_L1SS_CTL1_L1SS_MASK, val); | |
| } | |
| static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val) | |
| { | |
| pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL, | |
| PCI_EXP_LNKCTL_ASPMC, val); | |
| } | |
| static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state) | |
| { | |
| u32 upstream = 0, dwstream = 0; | |
| struct pci_dev *child = link->downstream, *parent = link->pdev; | |
| struct pci_bus *linkbus = parent->subordinate; | |
| /* Enable only the states that were not explicitly disabled */ | |
| state &= (link->aspm_capable & ~link->aspm_disable); | |
| /* Can't enable any substates if L1 is not enabled */ | |
| if (!(state & PCIE_LINK_STATE_L1)) | |
| state &= ~PCIE_LINK_STATE_L1SS; | |
| /* Spec says both ports must be in D0 before enabling PCI PM substates*/ | |
| if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) { | |
| state &= ~PCIE_LINK_STATE_L1_SS_PCIPM; | |
| state |= (link->aspm_enabled & PCIE_LINK_STATE_L1_SS_PCIPM); | |
| } | |
| /* Nothing to do if the link is already in the requested state */ | |
| if (link->aspm_enabled == state) | |
| return; | |
| /* Convert ASPM state to upstream/downstream ASPM register state */ | |
| if (state & PCIE_LINK_STATE_L0S_UP) | |
| dwstream |= PCI_EXP_LNKCTL_ASPM_L0S; | |
| if (state & PCIE_LINK_STATE_L0S_DW) | |
| upstream |= PCI_EXP_LNKCTL_ASPM_L0S; | |
| if (state & PCIE_LINK_STATE_L1) { | |
| upstream |= PCI_EXP_LNKCTL_ASPM_L1; | |
| dwstream |= PCI_EXP_LNKCTL_ASPM_L1; | |
| } | |
| /* | |
| * Per PCIe r6.2, sec 5.5.4, setting either or both of the enable | |
| * bits for ASPM L1 PM Substates must be done while ASPM L1 is | |
| * disabled. Disable L1 here and apply new configuration after L1SS | |
| * configuration has been completed. | |
| * | |
| * Per sec 7.5.3.7, when disabling ASPM L1, software must disable | |
| * it in the Downstream component prior to disabling it in the | |
| * Upstream component, and ASPM L1 must be enabled in the Upstream | |
| * component prior to enabling it in the Downstream component. | |
| * | |
| * Sec 7.5.3.7 also recommends programming the same ASPM Control | |
| * value for all functions of a multi-function device. | |
| */ | |
| list_for_each_entry(child, &linkbus->devices, bus_list) | |
| pcie_config_aspm_dev(child, 0); | |
| pcie_config_aspm_dev(parent, 0); | |
| if (link->aspm_capable & PCIE_LINK_STATE_L1SS) | |
| pcie_config_aspm_l1ss(link, state); | |
| pcie_config_aspm_dev(parent, upstream); | |
| list_for_each_entry(child, &linkbus->devices, bus_list) | |
| pcie_config_aspm_dev(child, dwstream); | |
| link->aspm_enabled = state; | |
| /* Update latest ASPM configuration in saved context */ | |
| pci_save_aspm_l1ss_state(link->downstream); | |
| pci_update_aspm_saved_state(link->downstream); | |
| pci_save_aspm_l1ss_state(parent); | |
| pci_update_aspm_saved_state(parent); | |
| } | |
| static void pcie_config_aspm_path(struct pcie_link_state *link) | |
| { | |
| while (link) { | |
| pcie_config_aspm_link(link, policy_to_aspm_state(link)); | |
| link = link->parent; | |
| } | |
| } | |
| static void free_link_state(struct pcie_link_state *link) | |
| { | |
| link->pdev->link_state = NULL; | |
| kfree(link); | |
| } | |
| static int pcie_aspm_sanity_check(struct pci_dev *pdev) | |
| { | |
| struct pci_dev *child; | |
| u32 reg32; | |
| /* | |
| * Some functions in a slot might not all be PCIe functions, | |
| * very strange. Disable ASPM for the whole slot | |
| */ | |
| list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { | |
| if (!pci_is_pcie(child)) | |
| return -EINVAL; | |
| /* | |
| * If ASPM is disabled then we're not going to change | |
| * the BIOS state. It's safe to continue even if it's a | |
| * pre-1.1 device | |
| */ | |
| if (aspm_disabled) | |
| continue; | |
| /* | |
| * Disable ASPM for pre-1.1 PCIe device, we follow MS to use | |
| * RBER bit to determine if a function is 1.1 version device | |
| */ | |
| pcie_capability_read_dword(child, PCI_EXP_DEVCAP, ®32); | |
| if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) { | |
| pci_info(child, "disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev) | |
| { | |
| struct pcie_link_state *link; | |
| link = kzalloc(sizeof(*link), GFP_KERNEL); | |
| if (!link) | |
| return NULL; | |
| INIT_LIST_HEAD(&link->sibling); | |
| link->pdev = pdev; | |
| link->downstream = pci_function_0(pdev->subordinate); | |
| /* | |
| * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe | |
| * hierarchies. Note that some PCIe host implementations omit | |
| * the root ports entirely, in which case a downstream port on | |
| * a switch may become the root of the link state chain for all | |
| * its subordinate endpoints. | |
| */ | |
| if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT || | |
| pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE || | |
| !pdev->bus->parent->self) { | |
| link->root = link; | |
| } else { | |
| struct pcie_link_state *parent; | |
| parent = pdev->bus->parent->self->link_state; | |
| if (!parent) { | |
| kfree(link); | |
| return NULL; | |
| } | |
| link->parent = parent; | |
| link->root = link->parent->root; | |
| } | |
| list_add(&link->sibling, &link_list); | |
| pdev->link_state = link; | |
| return link; | |
| } | |
| static void pcie_aspm_update_sysfs_visibility(struct pci_dev *pdev) | |
| { | |
| struct pci_dev *child; | |
| list_for_each_entry(child, &pdev->subordinate->devices, bus_list) | |
| sysfs_update_group(&child->dev.kobj, &aspm_ctrl_attr_group); | |
| } | |
| /* | |
| * pcie_aspm_init_link_state: Initiate PCI express link state. | |
| * It is called after the pcie and its children devices are scanned. | |
| * @pdev: the root port or switch downstream port | |
| */ | |
| void pcie_aspm_init_link_state(struct pci_dev *pdev) | |
| { | |
| struct pcie_link_state *link; | |
| int blacklist = !!pcie_aspm_sanity_check(pdev); | |
| if (!aspm_support_enabled) | |
| return; | |
| if (pdev->link_state) | |
| return; | |
| /* | |
| * We allocate pcie_link_state for the component on the upstream | |
| * end of a Link, so there's nothing to do unless this device is | |
| * downstream port. | |
| */ | |
| if (!pcie_downstream_port(pdev)) | |
| return; | |
| /* VIA has a strange chipset, root port is under a bridge */ | |
| if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT && | |
| pdev->bus->self) | |
| return; | |
| down_read(&pci_bus_sem); | |
| if (list_empty(&pdev->subordinate->devices)) | |
| goto out; | |
| mutex_lock(&aspm_lock); | |
| link = alloc_pcie_link_state(pdev); | |
| if (!link) | |
| goto unlock; | |
| /* | |
| * Setup initial ASPM state. Note that we need to configure | |
| * upstream links also because capable state of them can be | |
| * update through pcie_aspm_cap_init(). | |
| */ | |
| pcie_aspm_cap_init(link, blacklist); | |
| /* Setup initial Clock PM state */ | |
| pcie_clkpm_cap_init(link, blacklist); | |
| /* | |
| * At this stage drivers haven't had an opportunity to change the | |
| * link policy setting. Enabling ASPM on broken hardware can cripple | |
| * it even before the driver has had a chance to disable ASPM, so | |
| * default to a safe level right now. If we're enabling ASPM beyond | |
| * the BIOS's expectation, we'll do so once pci_enable_device() is | |
| * called. | |
| */ | |
| if (aspm_policy != POLICY_POWERSAVE && | |
| aspm_policy != POLICY_POWER_SUPERSAVE) { | |
| pcie_config_aspm_path(link); | |
| pcie_set_clkpm(link, policy_to_clkpm_state(link)); | |
| } | |
| pcie_aspm_update_sysfs_visibility(pdev); | |
| unlock: | |
| mutex_unlock(&aspm_lock); | |
| out: | |
| up_read(&pci_bus_sem); | |
| } | |
| void pci_bridge_reconfigure_ltr(struct pci_dev *pdev) | |
| { | |
| struct pci_dev *bridge; | |
| u32 ctl; | |
| bridge = pci_upstream_bridge(pdev); | |
| if (bridge && bridge->ltr_path) { | |
| pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2, &ctl); | |
| if (!(ctl & PCI_EXP_DEVCTL2_LTR_EN)) { | |
| pci_dbg(bridge, "re-enabling LTR\n"); | |
| pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2, | |
| PCI_EXP_DEVCTL2_LTR_EN); | |
| } | |
| } | |
| } | |
| void pci_configure_ltr(struct pci_dev *pdev) | |
| { | |
| struct pci_host_bridge *host = pci_find_host_bridge(pdev->bus); | |
| struct pci_dev *bridge; | |
| u32 cap, ctl; | |
| if (!pci_is_pcie(pdev)) | |
| return; | |
| pcie_capability_read_dword(pdev, PCI_EXP_DEVCAP2, &cap); | |
| if (!(cap & PCI_EXP_DEVCAP2_LTR)) | |
| return; | |
| pcie_capability_read_dword(pdev, PCI_EXP_DEVCTL2, &ctl); | |
| if (ctl & PCI_EXP_DEVCTL2_LTR_EN) { | |
| if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) { | |
| pdev->ltr_path = 1; | |
| return; | |
| } | |
| bridge = pci_upstream_bridge(pdev); | |
| if (bridge && bridge->ltr_path) | |
| pdev->ltr_path = 1; | |
| return; | |
| } | |
| if (!host->native_ltr) | |
| return; | |
| /* | |
| * Software must not enable LTR in an Endpoint unless the Root | |
| * Complex and all intermediate Switches indicate support for LTR. | |
| * PCIe r4.0, sec 6.18. | |
| */ | |
| if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) { | |
| pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2, | |
| PCI_EXP_DEVCTL2_LTR_EN); | |
| pdev->ltr_path = 1; | |
| return; | |
| } | |
| /* | |
| * If we're configuring a hot-added device, LTR was likely | |
| * disabled in the upstream bridge, so re-enable it before enabling | |
| * it in the new device. | |
| */ | |
| bridge = pci_upstream_bridge(pdev); | |
| if (bridge && bridge->ltr_path) { | |
| pci_bridge_reconfigure_ltr(pdev); | |
| pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2, | |
| PCI_EXP_DEVCTL2_LTR_EN); | |
| pdev->ltr_path = 1; | |
| } | |
| } | |
| /* Recheck latencies and update aspm_capable for links under the root */ | |
| static void pcie_update_aspm_capable(struct pcie_link_state *root) | |
| { | |
| struct pcie_link_state *link; | |
| BUG_ON(root->parent); | |
| list_for_each_entry(link, &link_list, sibling) { | |
| if (link->root != root) | |
| continue; | |
| link->aspm_capable = link->aspm_support; | |
| } | |
| list_for_each_entry(link, &link_list, sibling) { | |
| struct pci_dev *child; | |
| struct pci_bus *linkbus = link->pdev->subordinate; | |
| if (link->root != root) | |
| continue; | |
| list_for_each_entry(child, &linkbus->devices, bus_list) { | |
| if ((pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT) && | |
| (pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)) | |
| continue; | |
| pcie_aspm_check_latency(child); | |
| } | |
| } | |
| } | |
| /* @pdev: the endpoint device */ | |
| void pcie_aspm_exit_link_state(struct pci_dev *pdev) | |
| { | |
| struct pci_dev *parent = pdev->bus->self; | |
| struct pcie_link_state *link, *root, *parent_link; | |
| if (!parent || !parent->link_state) | |
| return; | |
| down_read(&pci_bus_sem); | |
| mutex_lock(&aspm_lock); | |
| link = parent->link_state; | |
| root = link->root; | |
| parent_link = link->parent; | |
| /* | |
| * Free the parent link state, no later than function 0 (i.e. | |
| * link->downstream) being removed. | |
| * | |
| * Do not free the link state any earlier. If function 0 is a | |
| * switch upstream port, this link state is parent_link to all | |
| * subordinate ones. | |
| */ | |
| if (pdev != link->downstream) | |
| goto out; | |
| pcie_config_aspm_link(link, 0); | |
| list_del(&link->sibling); | |
| free_link_state(link); | |
| /* Recheck latencies and configure upstream links */ | |
| if (parent_link) { | |
| pcie_update_aspm_capable(root); | |
| pcie_config_aspm_path(parent_link); | |
| } | |
| out: | |
| mutex_unlock(&aspm_lock); | |
| up_read(&pci_bus_sem); | |
| } | |
| /* | |
| * @pdev: the root port or switch downstream port | |
| * @locked: whether pci_bus_sem is held | |
| */ | |
| void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) | |
| { | |
| struct pcie_link_state *link = pdev->link_state; | |
| if (aspm_disabled || !link) | |
| return; | |
| /* | |
| * Devices changed PM state, we should recheck if latency | |
| * meets all functions' requirement | |
| */ | |
| if (!locked) | |
| down_read(&pci_bus_sem); | |
| mutex_lock(&aspm_lock); | |
| pcie_update_aspm_capable(link->root); | |
| pcie_config_aspm_path(link); | |
| mutex_unlock(&aspm_lock); | |
| if (!locked) | |
| up_read(&pci_bus_sem); | |
| } | |
| void pcie_aspm_powersave_config_link(struct pci_dev *pdev) | |
| { | |
| struct pcie_link_state *link = pdev->link_state; | |
| if (aspm_disabled || !link) | |
| return; | |
| if (aspm_policy != POLICY_POWERSAVE && | |
| aspm_policy != POLICY_POWER_SUPERSAVE) | |
| return; | |
| down_read(&pci_bus_sem); | |
| mutex_lock(&aspm_lock); | |
| pcie_config_aspm_path(link); | |
| pcie_set_clkpm(link, policy_to_clkpm_state(link)); | |
| mutex_unlock(&aspm_lock); | |
| up_read(&pci_bus_sem); | |
| } | |
| static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev) | |
| { | |
| struct pci_dev *bridge; | |
| if (!pci_is_pcie(pdev)) | |
| return NULL; | |
| bridge = pci_upstream_bridge(pdev); | |
| if (!bridge || !pci_is_pcie(bridge)) | |
| return NULL; | |
| return bridge->link_state; | |
| } | |
| static u8 pci_calc_aspm_disable_mask(int state) | |
| { | |
| state &= ~PCIE_LINK_STATE_CLKPM; | |
| /* L1 PM substates require L1 */ | |
| if (state & PCIE_LINK_STATE_L1) | |
| state |= PCIE_LINK_STATE_L1SS; | |
| return state; | |
| } | |
| static u8 pci_calc_aspm_enable_mask(int state) | |
| { | |
| state &= ~PCIE_LINK_STATE_CLKPM; | |
| /* L1 PM substates require L1 */ | |
| if (state & PCIE_LINK_STATE_L1SS) | |
| state |= PCIE_LINK_STATE_L1; | |
| return state; | |
| } | |
| static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool locked) | |
| { | |
| struct pcie_link_state *link = pcie_aspm_get_link(pdev); | |
| if (!link) | |
| return -EINVAL; | |
| /* | |
| * A driver requested that ASPM be disabled on this device, but | |
| * if we don't have permission to manage ASPM (e.g., on ACPI | |
| * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and | |
| * the _OSC method), we can't honor that request. Windows has | |
| * a similar mechanism using "PciASPMOptOut", which is also | |
| * ignored in this situation. | |
| */ | |
| if (aspm_disabled) { | |
| pci_warn(pdev, "can't disable ASPM; OS doesn't have ASPM control\n"); | |
| return -EPERM; | |
| } | |
| if (!locked) | |
| down_read(&pci_bus_sem); | |
| mutex_lock(&aspm_lock); | |
| link->aspm_disable |= pci_calc_aspm_disable_mask(state); | |
| pcie_config_aspm_link(link, policy_to_aspm_state(link)); | |
| if (state & PCIE_LINK_STATE_CLKPM) | |
| link->clkpm_disable = 1; | |
| pcie_set_clkpm(link, policy_to_clkpm_state(link)); | |
| mutex_unlock(&aspm_lock); | |
| if (!locked) | |
| up_read(&pci_bus_sem); | |
| return 0; | |
| } | |
| int pci_disable_link_state_locked(struct pci_dev *pdev, int state) | |
| { | |
| lockdep_assert_held_read(&pci_bus_sem); | |
| return __pci_disable_link_state(pdev, state, true); | |
| } | |
| EXPORT_SYMBOL(pci_disable_link_state_locked); | |
| /** | |
| * pci_disable_link_state - Disable device's link state, so the link will | |
| * never enter specific states. Note that if the BIOS didn't grant ASPM | |
| * control to the OS, this does nothing because we can't touch the LNKCTL | |
| * register. Returns 0 or a negative errno. | |
| * | |
| * @pdev: PCI device | |
| * @state: ASPM link state to disable | |
| */ | |
| int pci_disable_link_state(struct pci_dev *pdev, int state) | |
| { | |
| return __pci_disable_link_state(pdev, state, false); | |
| } | |
| EXPORT_SYMBOL(pci_disable_link_state); | |
| static int __pci_enable_link_state(struct pci_dev *pdev, int state, bool locked) | |
| { | |
| struct pcie_link_state *link = pcie_aspm_get_link(pdev); | |
| if (!link) | |
| return -EINVAL; | |
| /* | |
| * A driver requested that ASPM be enabled on this device, but | |
| * if we don't have permission to manage ASPM (e.g., on ACPI | |
| * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and | |
| * the _OSC method), we can't honor that request. | |
| */ | |
| if (aspm_disabled) { | |
| pci_warn(pdev, "can't override BIOS ASPM; OS doesn't have ASPM control\n"); | |
| return -EPERM; | |
| } | |
| if (!locked) | |
| down_read(&pci_bus_sem); | |
| mutex_lock(&aspm_lock); | |
| link->aspm_default = pci_calc_aspm_enable_mask(state); | |
| pcie_config_aspm_link(link, policy_to_aspm_state(link)); | |
| link->clkpm_default = (state & PCIE_LINK_STATE_CLKPM) ? 1 : 0; | |
| pcie_set_clkpm(link, policy_to_clkpm_state(link)); | |
| mutex_unlock(&aspm_lock); | |
| if (!locked) | |
| up_read(&pci_bus_sem); | |
| return 0; | |
| } | |
| /** | |
| * pci_enable_link_state - Clear and set the default device link state so that | |
| * the link may be allowed to enter the specified states. Note that if the | |
| * BIOS didn't grant ASPM control to the OS, this does nothing because we can't | |
| * touch the LNKCTL register. Also note that this does not enable states | |
| * disabled by pci_disable_link_state(). Return 0 or a negative errno. | |
| * | |
| * Note: Ensure devices are in D0 before enabling PCI-PM L1 PM Substates, per | |
| * PCIe r6.0, sec 5.5.4. | |
| * | |
| * @pdev: PCI device | |
| * @state: Mask of ASPM link states to enable | |
| */ | |
| int pci_enable_link_state(struct pci_dev *pdev, int state) | |
| { | |
| return __pci_enable_link_state(pdev, state, false); | |
| } | |
| EXPORT_SYMBOL(pci_enable_link_state); | |
| /** | |
| * pci_enable_link_state_locked - Clear and set the default device link state | |
| * so that the link may be allowed to enter the specified states. Note that if | |
| * the BIOS didn't grant ASPM control to the OS, this does nothing because we | |
| * can't touch the LNKCTL register. Also note that this does not enable states | |
| * disabled by pci_disable_link_state(). Return 0 or a negative errno. | |
| * | |
| * Note: Ensure devices are in D0 before enabling PCI-PM L1 PM Substates, per | |
| * PCIe r6.0, sec 5.5.4. | |
| * | |
| * @pdev: PCI device | |
| * @state: Mask of ASPM link states to enable | |
| * | |
| * Context: Caller holds pci_bus_sem read lock. | |
| */ | |
| int pci_enable_link_state_locked(struct pci_dev *pdev, int state) | |
| { | |
| lockdep_assert_held_read(&pci_bus_sem); | |
| return __pci_enable_link_state(pdev, state, true); | |
| } | |
| EXPORT_SYMBOL(pci_enable_link_state_locked); | |
| void pcie_aspm_remove_cap(struct pci_dev *pdev, u32 lnkcap) | |
| { | |
| if (lnkcap & PCI_EXP_LNKCAP_ASPM_L0S) | |
| pdev->aspm_l0s_support = 0; | |
| if (lnkcap & PCI_EXP_LNKCAP_ASPM_L1) | |
| pdev->aspm_l1_support = 0; | |
| pci_info(pdev, "ASPM: Link Capabilities%s%s treated as unsupported to avoid device defect\n", | |
| lnkcap & PCI_EXP_LNKCAP_ASPM_L0S ? " L0s" : "", | |
| lnkcap & PCI_EXP_LNKCAP_ASPM_L1 ? " L1" : ""); | |
| } | |
| static int pcie_aspm_set_policy(const char *val, | |
| const struct kernel_param *kp) | |
| { | |
| int i; | |
| struct pcie_link_state *link; | |
| if (aspm_disabled) | |
| return -EPERM; | |
| i = sysfs_match_string(policy_str, val); | |
| if (i < 0) | |
| return i; | |
| if (i == aspm_policy) | |
| return 0; | |
| down_read(&pci_bus_sem); | |
| mutex_lock(&aspm_lock); | |
| aspm_policy = i; | |
| list_for_each_entry(link, &link_list, sibling) { | |
| pcie_config_aspm_link(link, policy_to_aspm_state(link)); | |
| pcie_set_clkpm(link, policy_to_clkpm_state(link)); | |
| } | |
| mutex_unlock(&aspm_lock); | |
| up_read(&pci_bus_sem); | |
| return 0; | |
| } | |
| static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp) | |
| { | |
| int i, cnt = 0; | |
| for (i = 0; i < ARRAY_SIZE(policy_str); i++) | |
| if (i == aspm_policy) | |
| cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]); | |
| else | |
| cnt += sprintf(buffer + cnt, "%s ", policy_str[i]); | |
| cnt += sprintf(buffer + cnt, "\n"); | |
| return cnt; | |
| } | |
| module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy, | |
| NULL, 0644); | |
| /** | |
| * pcie_aspm_enabled - Check if PCIe ASPM has been enabled for a device. | |
| * @pdev: Target device. | |
| * | |
| * Relies on the upstream bridge's link_state being valid. The link_state | |
| * is deallocated only when the last child of the bridge (i.e., @pdev or a | |
| * sibling) is removed, and the caller should be holding a reference to | |
| * @pdev, so this should be safe. | |
| */ | |
| bool pcie_aspm_enabled(struct pci_dev *pdev) | |
| { | |
| struct pcie_link_state *link = pcie_aspm_get_link(pdev); | |
| if (!link) | |
| return false; | |
| return link->aspm_enabled; | |
| } | |
| EXPORT_SYMBOL_GPL(pcie_aspm_enabled); | |
| static ssize_t aspm_attr_show_common(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf, u8 state) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| struct pcie_link_state *link = pcie_aspm_get_link(pdev); | |
| return sysfs_emit(buf, "%d\n", (link->aspm_enabled & state) ? 1 : 0); | |
| } | |
| static ssize_t aspm_attr_store_common(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len, u8 state) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| struct pcie_link_state *link = pcie_aspm_get_link(pdev); | |
| bool state_enable; | |
| if (kstrtobool(buf, &state_enable) < 0) | |
| return -EINVAL; | |
| down_read(&pci_bus_sem); | |
| mutex_lock(&aspm_lock); | |
| if (state_enable) { | |
| link->aspm_disable &= ~state; | |
| /* need to enable L1 for substates */ | |
| if (state & PCIE_LINK_STATE_L1SS) | |
| link->aspm_disable &= ~PCIE_LINK_STATE_L1; | |
| } else { | |
| link->aspm_disable |= state; | |
| if (state & PCIE_LINK_STATE_L1) | |
| link->aspm_disable |= PCIE_LINK_STATE_L1SS; | |
| } | |
| pcie_config_aspm_link(link, policy_to_aspm_state(link)); | |
| mutex_unlock(&aspm_lock); | |
| up_read(&pci_bus_sem); | |
| return len; | |
| } | |
| #define ASPM_ATTR(_f, _s) \ | |
| static ssize_t _f##_show(struct device *dev, \ | |
| struct device_attribute *attr, char *buf) \ | |
| { return aspm_attr_show_common(dev, attr, buf, PCIE_LINK_STATE_##_s); } \ | |
| \ | |
| static ssize_t _f##_store(struct device *dev, \ | |
| struct device_attribute *attr, \ | |
| const char *buf, size_t len) \ | |
| { return aspm_attr_store_common(dev, attr, buf, len, PCIE_LINK_STATE_##_s); } | |
| ASPM_ATTR(l0s_aspm, L0S) | |
| ASPM_ATTR(l1_aspm, L1) | |
| ASPM_ATTR(l1_1_aspm, L1_1) | |
| ASPM_ATTR(l1_2_aspm, L1_2) | |
| ASPM_ATTR(l1_1_pcipm, L1_1_PCIPM) | |
| ASPM_ATTR(l1_2_pcipm, L1_2_PCIPM) | |
| static ssize_t clkpm_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| struct pcie_link_state *link = pcie_aspm_get_link(pdev); | |
| return sysfs_emit(buf, "%d\n", link->clkpm_enabled); | |
| } | |
| static ssize_t clkpm_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| struct pcie_link_state *link = pcie_aspm_get_link(pdev); | |
| bool state_enable; | |
| if (kstrtobool(buf, &state_enable) < 0) | |
| return -EINVAL; | |
| down_read(&pci_bus_sem); | |
| mutex_lock(&aspm_lock); | |
| link->clkpm_disable = !state_enable; | |
| pcie_set_clkpm(link, policy_to_clkpm_state(link)); | |
| mutex_unlock(&aspm_lock); | |
| up_read(&pci_bus_sem); | |
| return len; | |
| } | |
| static DEVICE_ATTR_RW(clkpm); | |
| static DEVICE_ATTR_RW(l0s_aspm); | |
| static DEVICE_ATTR_RW(l1_aspm); | |
| static DEVICE_ATTR_RW(l1_1_aspm); | |
| static DEVICE_ATTR_RW(l1_2_aspm); | |
| static DEVICE_ATTR_RW(l1_1_pcipm); | |
| static DEVICE_ATTR_RW(l1_2_pcipm); | |
| static struct attribute *aspm_ctrl_attrs[] = { | |
| &dev_attr_clkpm.attr, | |
| &dev_attr_l0s_aspm.attr, | |
| &dev_attr_l1_aspm.attr, | |
| &dev_attr_l1_1_aspm.attr, | |
| &dev_attr_l1_2_aspm.attr, | |
| &dev_attr_l1_1_pcipm.attr, | |
| &dev_attr_l1_2_pcipm.attr, | |
| NULL | |
| }; | |
| static umode_t aspm_ctrl_attrs_are_visible(struct kobject *kobj, | |
| struct attribute *a, int n) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| struct pcie_link_state *link = pcie_aspm_get_link(pdev); | |
| static const u8 aspm_state_map[] = { | |
| PCIE_LINK_STATE_L0S, | |
| PCIE_LINK_STATE_L1, | |
| PCIE_LINK_STATE_L1_1, | |
| PCIE_LINK_STATE_L1_2, | |
| PCIE_LINK_STATE_L1_1_PCIPM, | |
| PCIE_LINK_STATE_L1_2_PCIPM, | |
| }; | |
| if (aspm_disabled || !link) | |
| return 0; | |
| if (n == 0) | |
| return link->clkpm_capable ? a->mode : 0; | |
| return link->aspm_capable & aspm_state_map[n - 1] ? a->mode : 0; | |
| } | |
| const struct attribute_group aspm_ctrl_attr_group = { | |
| .name = "link", | |
| .attrs = aspm_ctrl_attrs, | |
| .is_visible = aspm_ctrl_attrs_are_visible, | |
| }; | |
| static int __init pcie_aspm_disable(char *str) | |
| { | |
| if (!strcmp(str, "off")) { | |
| aspm_policy = POLICY_DEFAULT; | |
| aspm_disabled = true; | |
| aspm_support_enabled = false; | |
| pr_info("PCIe ASPM is disabled\n"); | |
| } else if (!strcmp(str, "force")) { | |
| aspm_force = true; | |
| pr_info("PCIe ASPM is forcibly enabled\n"); | |
| } | |
| return 1; | |
| } | |
| __setup("pcie_aspm=", pcie_aspm_disable); | |
| void pcie_no_aspm(void) | |
| { | |
| /* | |
| * Disabling ASPM is intended to prevent the kernel from modifying | |
| * existing hardware state, not to clear existing state. To that end: | |
| * (a) set policy to POLICY_DEFAULT in order to avoid changing state | |
| * (b) prevent userspace from changing policy | |
| */ | |
| if (!aspm_force) { | |
| aspm_policy = POLICY_DEFAULT; | |
| aspm_disabled = true; | |
| } | |
| } | |
| bool pcie_aspm_support_enabled(void) | |
| { | |
| return aspm_support_enabled; | |
| } | |
| #endif /* CONFIG_PCIEASPM */ |