blob: 0a634fb07452cbb19351665403eca292dd212201 [file] [log] [blame]
/*
* Copyright 2012 Stefan Roese <sr@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,spear600";
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
compatible = "arm,arm926ej-s";
device_type = "cpu";
};
};
memory {
device_type = "memory";
reg = <0 0x40000000>;
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
vic0: interrupt-controller@f1100000 {
compatible = "arm,pl190-vic";
interrupt-controller;
reg = <0xf1100000 0x1000>;
#interrupt-cells = <1>;
};
vic1: interrupt-controller@f1000000 {
compatible = "arm,pl190-vic";
interrupt-controller;
reg = <0xf1000000 0x1000>;
#interrupt-cells = <1>;
};
clcd: clcd@fc200000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xfc200000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
status = "disabled";
};
dmac: dma@fc400000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0xfc400000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <10>;
status = "disabled";
};
gmac: ethernet@e0800000 {
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
interrupt-parent = <&vic1>;
interrupts = <24 23>;
interrupt-names = "macirq", "eth_wake_irq";
phy-mode = "gmii";
status = "disabled";
};
fsmc: flash@d1800000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd1800000 0x1000 /* FSMC Register */
0xd2000000 0x0010 /* NAND Base DATA */
0xd2020000 0x0010 /* NAND Base ADDR */
0xd2010000 0x0010>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled";
};
smi: flash@fc000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xfc000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
status = "disabled";
};
ehci_usb0: ehci@e1800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe1800000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <27>;
status = "disabled";
};
ehci_usb1: ehci@e2000000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe2000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <29>;
status = "disabled";
};
ohci_usb0: ohci@e1900000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe1900000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <26>;
status = "disabled";
};
ohci_usb1: ohci@e2100000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <28>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
uart0: serial@d0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0000000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <24>;
status = "disabled";
};
uart1: serial@d0080000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0080000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <25>;
status = "disabled";
};
/* local/cpu GPIO */
gpio0: gpio@f0100000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xf0100000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <18>;
};
/* basic GPIO */
gpio1: gpio@fc980000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfc980000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <19>;
};
/* appl GPIO */
gpio2: gpio@d8100000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xd8100000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <4>;
};
i2c: i2c@d0200000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xd0200000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <28>;
status = "disabled";
};
rtc: rtc@fc900000 {
compatible = "st,spear600-rtc";
reg = <0xfc900000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <10>;
status = "disabled";
};
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
interrupt-parent = <&vic0>;
interrupts = <16>;
};
adc: adc@d820b000 {
compatible = "st,spear600-adc";
reg = <0xd820b000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <6>;
status = "disabled";
};
};
};
};