Merge tag 'v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Conflicts:
	fs/gfs2/Kconfig
diff --git a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
index 2a7f9a0..e960cd0 100644
--- a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
+++ b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
@@ -1,5 +1,5 @@
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -12,8 +12,8 @@
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -27,7 +27,7 @@
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -40,7 +40,7 @@
 		sent to the device or not.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -51,7 +51,7 @@
 		published by the USB-IF.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd
new file mode 100644
index 0000000..d535757
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-block-rssd
@@ -0,0 +1,18 @@
+What:           /sys/block/rssd*/registers
+Date:           March 2012
+KernelVersion:  3.3
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:    This is a read-only file. Dumps below driver information and
+                hardware registers.
+                    - S ACTive
+                    - Command Issue
+                    - Allocated
+                    - Completed
+                    - PORT IRQ STAT
+                    - HOST IRQ STAT
+
+What:           /sys/block/rssd*/status
+Date:           April 2012
+KernelVersion:  3.4
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:   This is a read-only file. Indicates the status of the device.
diff --git a/Documentation/ABI/testing/sysfs-bus-hsi b/Documentation/ABI/testing/sysfs-bus-hsi
new file mode 100644
index 0000000..1b1b282
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-hsi
@@ -0,0 +1,19 @@
+What:		/sys/bus/hsi
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:
+		High Speed Synchronous Serial Interface (HSI) is a
+		serial interface mainly used for connecting application
+		engines (APE) with cellular modem engines (CMT) in cellular
+		handsets.
+		The bus will be populated with devices (hsi_clients) representing
+		the protocols available in the system. Bus drivers implement
+		those protocols.
+
+What:		/sys/bus/hsi/devices/.../modalias
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: hsi:<hsi_client device name>
diff --git a/Documentation/ABI/testing/sysfs-cfq-target-latency b/Documentation/ABI/testing/sysfs-cfq-target-latency
new file mode 100644
index 0000000..df0f782
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-cfq-target-latency
@@ -0,0 +1,8 @@
+What:		/sys/block/<device>/iosched/target_latency
+Date:		March 2012
+contact:	Tao Ma <boyu.mt@taobao.com>
+Description:
+		The /sys/block/<device>/iosched/target_latency only exists
+		when the user sets cfq to /sys/block/<device>/scheduler.
+		It contains an estimated latency time for the cfq. cfq will
+		use it to calculate the time slice used for every task.
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
index 3fd3ce5..5274c24 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-NV12M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
index 9957863..60308f1 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-YUV420M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 4c95c00..9b1067a 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -34,8 +34,7 @@
 
 Features:
  - accounting anonymous pages, file caches, swap caches usage and limiting them.
- - private LRU and reclaim routine. (system's global LRU and private LRU
-   work independently from each other)
+ - pages are linked to per-memcg LRU exclusively, and there is no global LRU.
  - optionally, memory+swap usage can be accounted and limited.
  - hierarchical accounting
  - soft limit
@@ -154,7 +153,7 @@
 2.2.1 Accounting details
 
 All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
-Some pages which are never reclaimable and will not be on the global LRU
+Some pages which are never reclaimable and will not be on the LRU
 are not accounted. We just account pages under usual VM management.
 
 RSS pages are accounted at page_fault unless they've already been accounted
diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
similarity index 90%
rename from Documentation/devicetree/bindings/ata/calxeda-sata.txt
rename to Documentation/devicetree/bindings/ata/ahci-platform.txt
index 79caa56..8bb8a76 100644
--- a/Documentation/devicetree/bindings/ata/calxeda-sata.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -1,10 +1,10 @@
-* Calxeda SATA Controller
+* AHCI SATA Controller
 
 SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
+- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
@@ -14,4 +14,3 @@
                 reg = <0xffe08000 0x1000>;
                 interrupts = <115>;
         };
-
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt
index 2c3cd41..9cc4444 100644
--- a/Documentation/devicetree/bindings/sound/sgtl5000.txt
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt
@@ -3,6 +3,8 @@
 Required properties:
 - compatible : "fsl,sgtl5000".
 
+- reg : the I2C address of the device
+
 Example:
 
 codec: sgtl5000@0a {
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 709e08e..e4b5775 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -531,3 +531,21 @@
 	of ASLR. It was only ever intended for debugging, so it should be
 	removed.
 Who:	Kees Cook <keescook@chromium.org>
+
+----------------------------
+
+What:	setitimer accepts user NULL pointer (value)
+When:	3.6
+Why:	setitimer is not returning -EFAULT if user pointer is NULL. This
+	violates the spec.
+Who:	Sasikantha Babu <sasikanth.v19@gmail.com>
+
+----------------------------
+
+What:	V4L2_CID_HCENTER, V4L2_CID_VCENTER V4L2 controls
+When:	3.7
+Why:	The V4L2_CID_VCENTER, V4L2_CID_HCENTER controls have been deprecated
+	for about 4 years and they are not used by any mainline driver.
+	There are newer controls (V4L2_CID_PAN*, V4L2_CID_TILT*) that provide
+	similar	functionality.
+Who:	Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index e916e3d..0d04920 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -114,7 +114,7 @@
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        struct dentry (*mount) (struct file_system_type *, int,
+        struct dentry *(*mount) (struct file_system_type *, int,
                        const char *, void *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index bd80ba5..1619a8c 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -147,7 +147,7 @@
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
 	Possible values are [-31, 31], inclusive.
-	Default: 2
+	Default: 1
 
 tcp_allowed_congestion_control - STRING
 	Show/set the congestion control choices available to non-privileged
@@ -410,7 +410,7 @@
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 4MB, depending on RAM size.
+	Default: between 87380B and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt
index ec715cd..6ec291e 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@@ -9,7 +9,7 @@
 
 II. How does it work?
 
-There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE
+There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
 and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
 PF_NOFREEZE unset (all user space processes and some kernel threads) are
 regarded as 'freezable' and treated in a special way before the system enters a
@@ -17,30 +17,31 @@
 we only consider hibernation, but the description also applies to suspend).
 
 Namely, as the first step of the hibernation procedure the function
-freeze_processes() (defined in kernel/power/process.c) is called.  It executes
-try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and
-either wakes them up, if they are kernel threads, or sends fake signals to them,
-if they are user space processes.  A task that has TIF_FREEZE set, should react
-to it by calling the function called __refrigerator() (defined in
-kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
-to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
-Then, we say that the task is 'frozen' and therefore the set of functions
-handling this mechanism is referred to as 'the freezer' (these functions are
-defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
-User space processes are generally frozen before kernel threads.
+freeze_processes() (defined in kernel/power/process.c) is called.  A system-wide
+variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate
+whether the system is to undergo a freezing operation. And freeze_processes()
+sets this variable.  After this, it executes try_to_freeze_tasks() that sends a
+fake signal to all user space processes, and wakes up all the kernel threads.
+All freezable tasks must react to that by calling try_to_freeze(), which
+results in a call to __refrigerator() (defined in kernel/freezer.c), which sets
+the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes
+it loop until PF_FROZEN is cleared for it. Then, we say that the task is
+'frozen' and therefore the set of functions handling this mechanism is referred
+to as 'the freezer' (these functions are defined in kernel/power/process.c,
+kernel/freezer.c & include/linux/freezer.h). User space processes are generally
+frozen before kernel threads.
 
 __refrigerator() must not be called directly.  Instead, use the
 try_to_freeze() function (defined in include/linux/freezer.h), that checks
-the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the
-flag is set.
+if the task is to be frozen and makes the task enter __refrigerator().
 
 For user space processes try_to_freeze() is called automatically from the
 signal-handling code, but the freezable kernel threads need to call it
 explicitly in suitable places or use the wait_event_freezable() or
 wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
-that combine interruptible sleep with checking if TIF_FREEZE is set and calling
-try_to_freeze().  The main loop of a freezable kernel thread may look like the
-following one:
+that combine interruptible sleep with checking if the task is to be frozen and
+calling try_to_freeze().  The main loop of a freezable kernel thread may look
+like the following one:
 
 	set_freezable();
 	do {
@@ -53,7 +54,7 @@
 (from drivers/usb/core/hub.c::hub_thread()).
 
 If a freezable kernel thread fails to call try_to_freeze() after the freezer has
-set TIF_FREEZE for it, the freezing of tasks will fail and the entire
+initiated a freezing operation, the freezing of tasks will fail and the entire
 hibernation operation will be cancelled.  For this reason, freezable kernel
 threads must call try_to_freeze() somewhere or use one of the
 wait_event_freezable() and wait_event_freezable_timeout() macros.
diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt
index 7877170..d389acd 100644
--- a/Documentation/security/keys.txt
+++ b/Documentation/security/keys.txt
@@ -123,7 +123,7 @@
 
 The key service provides a number of features besides keys:
 
- (*) The key service defines two special key types:
+ (*) The key service defines three special key types:
 
      (+) "keyring"
 
@@ -137,6 +137,18 @@
 	 blobs of data. These can be created, updated and read by userspace,
 	 and aren't intended for use by kernel services.
 
+     (+) "logon"
+
+	 Like a "user" key, a "logon" key has a payload that is an arbitrary
+	 blob of data. It is intended as a place to store secrets which are
+	 accessible to the kernel but not to userspace programs.
+
+	 The description can be arbitrary, but must be prefixed with a non-zero
+	 length string that describes the key "subclass". The subclass is
+	 separated from the rest of the description by a ':'. "logon" keys can
+	 be created and updated from userspace, but the payload is only
+	 readable from kernel space.
+
  (*) Each process subscribes to three keyrings: a thread-specific keyring, a
      process-specific keyring, and a session-specific keyring.
 
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index d97d992..03f7897 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -43,7 +43,9 @@
 
 ALC882/883/885/888/889
 ======================
-  N/A
+  acer-aspire-4930g	Acer Aspire 4930G/5930G/6530G/6930G/7730G
+  acer-aspire-8930g	Acer Aspire 8330G/6935G
+  acer-aspire		Acer Aspire others
 
 ALC861/660
 ==========
diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt
index 8ffce74..00d2c64 100644
--- a/Documentation/usb/URB.txt
+++ b/Documentation/usb/URB.txt
@@ -168,6 +168,28 @@
 they will get a -EPERM error.  Thus you can be sure that when
 usb_kill_urb() returns, the URB is totally idle.
 
+There is a lifetime issue to consider.  An URB may complete at any
+time, and the completion handler may free the URB.  If this happens
+while usb_unlink_urb or usb_kill_urb is running, it will cause a
+memory-access violation.  The driver is responsible for avoiding this,
+which often means some sort of lock will be needed to prevent the URB
+from being deallocated while it is still in use.
+
+On the other hand, since usb_unlink_urb may end up calling the
+completion handler, the handler must not take any lock that is held
+when usb_unlink_urb is invoked.  The general solution to this problem
+is to increment the URB's reference count while holding the lock, then
+drop the lock and call usb_unlink_urb or usb_kill_urb, and then
+decrement the URB's reference count.  You increment the reference
+count by calling
+
+	struct urb *usb_get_urb(struct urb *urb)
+
+(ignore the return value; it is the same as the argument) and
+decrement the reference count by calling usb_free_urb.  Of course,
+none of this is necessary if there's no danger of the URB being freed
+by the completion handler.
+
 
 1.7. What about the completion handler?
 
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 5335fa8..c42bb9c 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -183,10 +183,10 @@
 d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
 d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
 
-An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
-to a storage device at address 5:
+An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
+Bulk wrapper to a storage device at address 5:
 
-dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000
+dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
 dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
 
 * Raw binary format and API
diff --git a/MAINTAINERS b/MAINTAINERS
index b084020..bb835c7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1521,8 +1521,8 @@
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
 S:	Maintained
 F:	drivers/bluetooth/
 
@@ -1532,8 +1532,8 @@
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
 S:	Maintained
 F:	net/bluetooth/
 F:	include/net/bluetooth/
@@ -1968,10 +1968,9 @@
 F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
-M:	Dave Jones <davej@redhat.com>
+M:	Rafael J. Wysocki <rjw@sisk.pl>
 L:	cpufreq@vger.kernel.org
-W:	http://www.codemonkey.org.uk/projects/cpufreq/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
+L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
@@ -2321,9 +2320,9 @@
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-M:	Randy Dunlap <rdunlap@xenotime.net>
+M:	Rob Landley <rob@landley.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt http://xenotime.net/kernel-doc-patches/current/
+T:	TBD
 S:	Maintained
 F:	Documentation/
 
@@ -3601,6 +3600,7 @@
 F:	drivers/net/wireless/iwlegacy/
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
+M:	Johannes Berg <johannes.berg@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
@@ -4045,6 +4045,7 @@
 F:	drivers/scsi/53c700*
 
 LED SUBSYSTEM
+M:	Bryan Wu <bryan.wu@canonical.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/leds/
@@ -4542,8 +4543,7 @@
 F:	drivers/net/ethernet/myricom/myri10ge/
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-M:	Tim Hockin <thockin@hockin.org>
-S:	Maintained
+S:	Orphan
 F:	drivers/net/ethernet/natsemi/natsemi.c
 
 NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
@@ -4812,6 +4812,7 @@
 F:	arch/arm/mach-omap2/clockdomain44xx.c
 
 OMAP AUDIO SUPPORT
+M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
 M:	Jarkko Nikula <jarkko.nikula@bitmer.com>
 L:	alsa-devel@alsa-project.org (subscribers-only)
 L:	linux-omap@vger.kernel.org
@@ -5126,6 +5127,11 @@
 F:	include/linux/i2c-algo-pca.h
 F:	include/linux/i2c-pca-platform.h
 
+PCDP - PRIMARY CONSOLE AND DEBUG PORT
+M:	Khalid Aziz <khalid.aziz@hp.com>
+S:	Maintained
+F:	drivers/firmware/pcdp.*
+
 PCI ERROR RECOVERY
 M:     Linas Vepstas <linasvepstas@gmail.com>
 L:	linux-pci@vger.kernel.org
@@ -5895,11 +5901,11 @@
 F:	drivers/scsi/st*
 
 SCTP PROTOCOL
-M:	Vlad Yasevich <vladislav.yasevich@hp.com>
+M:	Vlad Yasevich <vyasevich@gmail.com>
 M:	Sridhar Samudrala <sri@us.ibm.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	Documentation/networking/sctp.txt
 F:	include/linux/sctp.h
 F:	include/net/sctp/
@@ -6475,6 +6481,7 @@
 F:	drivers/staging/olpc_dcon/
 
 STAGING - OZMO DEVICES USB OVER WIFI DRIVER
+M:	Rupesh Gujare <rgujare@ozmodevices.com>
 M:	Chris Kelly <ckelly@ozmodevices.com>
 S:	Maintained
 F:	drivers/staging/ozwpan/
@@ -7480,8 +7487,7 @@
 
 WOLFSON MICROELECTRONICS DRIVERS
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
-M:	Ian Lartey <ian@opensource.wolfsonmicro.com>
-M:	Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+L:	patches@opensource.wolfsonmicro.com
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
 W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
@@ -7592,8 +7598,8 @@
 F:	fs/xfs/
 
 XILINX AXI ETHERNET DRIVER
-M:	Ariane Keller <ariane.keller@tik.ee.ethz.ch>
-M:	Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
+M:	Anirudha Sarangi <anirudh@xilinx.com>
+M:	John Linn <John.Linn@xilinx.com>
 S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 
diff --git a/Makefile b/Makefile
index 0df3d00..a687963 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
@@ -442,7 +442,7 @@
 
 no-dot-config-targets := clean mrproper distclean \
 			 cscope gtags TAGS tags help %docs check% coccicheck \
-			 include/linux/version.h headers_% archheaders \
+			 include/linux/version.h headers_% archheaders archscripts \
 			 kernelversion %src-pkg
 
 config-targets := 0
@@ -979,7 +979,7 @@
                    include/config/auto.conf
 	$(cmd_crmodverdir)
 
-archprepare: archheaders prepare1 scripts_basic
+archprepare: archheaders archscripts prepare1 scripts_basic
 
 prepare0: archprepare FORCE
 	$(Q)$(MAKE) $(build)=.
@@ -1049,8 +1049,11 @@
 PHONY += archheaders
 archheaders:
 
+PHONY += archscripts
+archscripts:
+
 PHONY += __headers
-__headers: include/linux/version.h scripts_basic asm-generic archheaders FORCE
+__headers: include/linux/version.h scripts_basic asm-generic archheaders archscripts FORCE
 	$(Q)$(MAKE) $(build)=scripts build_unifdef
 
 PHONY += headers_install_all
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 56a4df9..22e58a9 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -477,7 +477,7 @@
 
 config VGA_HOSE
 	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI
+	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
 	default y
 	help
 	  Support VGA on an arbitrary hose; needed for several platforms
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index f62251e..3bb7ffe 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -3,6 +3,7 @@
 
 #include <linux/types.h>
 #include <asm/barrier.h>
+#include <asm/cmpxchg.h>
 
 /*
  * Atomic operations that C can't guarantee us.  Useful for
@@ -168,73 +169,6 @@
 	return result;
 }
 
-/*
- * Atomic exchange routines.
- */
-
-#define __ASM__MB
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
-#include <asm/xchg.h>
-
-#define xchg_local(ptr,x)						\
-  ({									\
-     __typeof__(*(ptr)) _x_ = (x);					\
-     (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
-  })
-
-#define cmpxchg_local(ptr, o, n)					\
-  ({									\
-     __typeof__(*(ptr)) _o_ = (o);					\
-     __typeof__(*(ptr)) _n_ = (n);					\
-     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
-					  (unsigned long)_n_,		\
-					  sizeof(*(ptr)));		\
-  })
-
-#define cmpxchg64_local(ptr, o, n)					\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-  })
-
-#ifdef CONFIG_SMP
-#undef __ASM__MB
-#define __ASM__MB	"\tmb\n"
-#endif
-#undef ____xchg
-#undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
-#include <asm/xchg.h>
-
-#define xchg(ptr,x)							\
-  ({									\
-     __typeof__(*(ptr)) _x_ = (x);					\
-     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
-				 sizeof(*(ptr)));			\
-  })
-
-#define cmpxchg(ptr, o, n)						\
-  ({									\
-     __typeof__(*(ptr)) _o_ = (o);					\
-     __typeof__(*(ptr)) _n_ = (n);					\
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		\
-				    (unsigned long)_n_,	sizeof(*(ptr)));\
-  })
-
-#define cmpxchg64(ptr, o, n)						\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
-  })
-
-#undef __ASM__MB
-#undef ____cmpxchg
-
-#define __HAVE_ARCH_CMPXCHG 1
-
 #define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
 #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
 
diff --git a/arch/alpha/include/asm/cmpxchg.h b/arch/alpha/include/asm/cmpxchg.h
new file mode 100644
index 0000000..429e8cd
--- /dev/null
+++ b/arch/alpha/include/asm/cmpxchg.h
@@ -0,0 +1,71 @@
+#ifndef _ALPHA_CMPXCHG_H
+#define _ALPHA_CMPXCHG_H
+
+/*
+ * Atomic exchange routines.
+ */
+
+#define __ASM__MB
+#define ____xchg(type, args...)		__xchg ## type ## _local(args)
+#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
+#include <asm/xchg.h>
+
+#define xchg_local(ptr, x)						\
+({									\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
+				       sizeof(*(ptr)));			\
+})
+
+#define cmpxchg_local(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
+					  (unsigned long)_n_,		\
+					  sizeof(*(ptr)));		\
+})
+
+#define cmpxchg64_local(ptr, o, n)					\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+})
+
+#ifdef CONFIG_SMP
+#undef __ASM__MB
+#define __ASM__MB	"\tmb\n"
+#endif
+#undef ____xchg
+#undef ____cmpxchg
+#define ____xchg(type, args...)		__xchg ##type(args)
+#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
+#include <asm/xchg.h>
+
+#define xchg(ptr, x)							\
+({									\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
+				 sizeof(*(ptr)));			\
+})
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
+				    (unsigned long)_n_,	sizeof(*(ptr)));\
+})
+
+#define cmpxchg64(ptr, o, n)						\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+})
+
+#undef __ASM__MB
+#undef ____cmpxchg
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#endif /* _ALPHA_CMPXCHG_H */
diff --git a/arch/alpha/include/asm/rtc.h b/arch/alpha/include/asm/rtc.h
index 1f7fba6..d70408d 100644
--- a/arch/alpha/include/asm/rtc.h
+++ b/arch/alpha/include/asm/rtc.h
@@ -1,14 +1,10 @@
 #ifndef _ALPHA_RTC_H
 #define _ALPHA_RTC_H
 
-#if defined(CONFIG_ALPHA_GENERIC)
+#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
+ || defined(CONFIG_ALPHA_GENERIC)
 # define get_rtc_time		alpha_mv.rtc_get_time
 # define set_rtc_time		alpha_mv.rtc_set_time
-#else
-# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
-#  define get_rtc_time		marvel_get_rtc_time
-#  define set_rtc_time		marvel_set_rtc_time
-# endif
 #endif
 
 #include <asm-generic/rtc.h>
diff --git a/arch/alpha/include/asm/xchg.h b/arch/alpha/include/asm/xchg.h
index 1d1b436..0ca9724 100644
--- a/arch/alpha/include/asm/xchg.h
+++ b/arch/alpha/include/asm/xchg.h
@@ -1,10 +1,10 @@
-#ifndef _ALPHA_ATOMIC_H
+#ifndef _ALPHA_CMPXCHG_H
 #error Do not include xchg.h directly!
 #else
 /*
  * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
  * except that local version do not have the expensive memory barrier.
- * So this file is included twice from asm/system.h.
+ * So this file is included twice from asm/cmpxchg.h.
  */
 
 /*
diff --git a/arch/alpha/kernel/core_tsunami.c b/arch/alpha/kernel/core_tsunami.c
index 5e7c28f..61893d7 100644
--- a/arch/alpha/kernel/core_tsunami.c
+++ b/arch/alpha/kernel/core_tsunami.c
@@ -11,6 +11,7 @@
 #include <asm/core_tsunami.h>
 #undef __EXTERN_INLINE
 
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index 14a4b6a..407accc 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -317,7 +317,7 @@
 }
 
 static int 
-marvel_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pci_controller *hose = dev->sysdata;
 	struct io7_port *io7_port = hose->sysdata;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cf006d4..36586dba 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1186,6 +1186,15 @@
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_326103
+	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+	depends on CPU_V6
+	help
+	  Executing a SWP instruction to read-only memory does not set bit 11
+	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+	  treat the access as a read, preventing a COW from occurring and
+	  causing the faulting task to livelock.
+
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 	depends on CPU_V6 || CPU_V6K
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 6ce11c4..797f04b 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -77,6 +77,8 @@
 		} else if (atag->hdr.tag == ATAG_MEM) {
 			if (memcount >= sizeof(mem_reg_property)/4)
 				continue;
+			if (!atag->u.mem.size)
+				continue;
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
 		} else if (atag->hdr.tag == ATAG_INITRD2) {
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 5f6045f..dc7e8ce 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -273,7 +273,7 @@
 		add	r0, r0, #0x100
 		mov	r1, r6
 		sub	r2, sp, r6
-		blne	atags_to_fdt
+		bleq	atags_to_fdt
 
 		ldmfd	sp!, {r0-r3, ip, lr}
 		sub	sp, sp, #0x10000
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 799ad18..773ef48 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -55,7 +55,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 9e6eb6e..c804214 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -56,7 +56,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 70ab3a4..dd4ed74 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -54,7 +54,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index d73dce6..14bc307 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -24,7 +24,6 @@
 			#interrupt-cells = <3>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xa0411000 0x1000>,
 			      <0xa0410100 0x100>;
 		};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 37c0ff9..83e7229 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -89,7 +89,6 @@
 			#size-cells = <0>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
 		};
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 15ded0d..45bc4bb 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -10,7 +10,7 @@
 	intc: interrupt-controller@02080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x02080000 0x1000 >,
 		      < 0x02081000 0x1000 >;
 	};
@@ -19,6 +19,6 @@
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
-		interrupts = <195>;
+		interrupts = <0 195 0x0>;
 	};
 };
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 0b32925..e2fe319 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -173,7 +173,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22>;
+				interrupts = <22 34>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 1664610..7e81752 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23>;
+				interrupts = <23 34>;
 			};
 		};
 	};
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 7a66311..7e288f9 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -427,19 +427,18 @@
 
 /*
  * Handle each interrupt in a single VIC.  Returns non-zero if we've
- * handled at least one interrupt.  This does a single read of the
- * status register and handles all interrupts in order from LSB first.
+ * handled at least one interrupt.  This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
  */
 static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
 {
 	u32 stat, irq;
 	int handled = 0;
 
-	stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
-	while (stat) {
+	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
 		irq = ffs(stat) - 1;
 		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
-		stat &= ~(1 << irq);
 		handled = 1;
 	}
 
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index b5ac644..6b31cb6 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -112,6 +112,7 @@
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_FB=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 42da918..082175c 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -14,6 +14,8 @@
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_S3C24XX=y
+# CONFIG_CPU_S3C2410 is not set
+CONFIG_CPU_S3C2440=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 889d73a..7e84f45 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -8,8 +8,6 @@
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_U8500=y
-CONFIG_UX500_SOC_DB5500=y
-CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
@@ -39,7 +37,6 @@
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
@@ -65,16 +62,18 @@
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_NOMADIK=y
-CONFIG_I2C=y
-CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_AB8500_BM=y
+CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
+CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
index 5c5ca2e..bfc198c 100644
--- a/arch/arm/include/asm/jump_label.h
+++ b/arch/arm/include/asm/jump_label.h
@@ -14,7 +14,7 @@
 #define JUMP_LABEL_NOP	"nop"
 #endif
 
-static __always_inline bool arch_static_branch(struct jump_label_key *key)
+static __always_inline bool arch_static_branch(struct static_key *key)
 {
 	asm goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index d4c24d4..0f04d84 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -118,6 +118,13 @@
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
+struct user_vfp;
+struct user_vfp_exc;
+
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
+					   struct user_vfp_exc __user *);
+extern int vfp_restore_user_hwstate(struct user_vfp __user *,
+				    struct user_vfp_exc __user *);
 #endif
 
 /*
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index 60843eb..73409e6 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -7,6 +7,8 @@
 
 	.macro set_tls_v6k, tp, tmp1, tmp2
 	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	mov	\tmp1, #0
+	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	.endm
 
 	.macro set_tls_v6, tp, tmp1, tmp2
@@ -15,6 +17,8 @@
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	movne	\tmp1, #0
+	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 71ccdbf..8349d4e 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -155,10 +155,10 @@
 	}
 
 	c = irq_data_get_irq_chip(d);
-	if (c->irq_set_affinity)
-		c->irq_set_affinity(d, affinity, true);
-	else
+	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
 
 	return ret;
 }
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 80abafb..9650c14 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -906,27 +906,14 @@
 	return ret;
 }
 
-#ifdef __ARMEB__
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
-#else
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
-#endif
-
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
 
-	/*
-	 * Save IP.  IP is used to denote syscall entry/exit:
-	 *  IP = 0 -> entry, = 1 -> exit
-	 */
-	ip = regs->ARM_ip;
-	regs->ARM_ip = why;
-
-	if (!ip)
+	if (why)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
@@ -936,6 +923,13 @@
 
 	current_thread_info()->syscall = scno;
 
+	/*
+	 * IP is used to denote syscall entry/exit:
+	 * IP = 0 -> entry, =1 -> exit
+	 */
+	ip = regs->ARM_ip;
+	regs->ARM_ip = why;
+
 	/* the 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b914113..ebfac78 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -523,7 +523,21 @@
 	 */
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
-	bank->size  = size & PAGE_MASK;
+
+#ifndef CONFIG_LPAE
+	if (bank->start + size < bank->start) {
+		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
+			"32-bit physical address space\n", (long long)start);
+		/*
+		 * To ensure bank->start + bank->size is representable in
+		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
+		 * This means we lose a page after masking.
+		 */
+		size = ULONG_MAX - bank->start;
+	}
+#endif
+
+	bank->size = size & PAGE_MASK;
 
 	/*
 	 * Check whether this memory region has non-zero size or
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 7cb532f..d68d1b6 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -180,44 +180,23 @@
 
 static int preserve_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	const unsigned long magic = VFP_MAGIC;
 	const unsigned long size = VFP_STORAGE_SIZE;
 	int err = 0;
 
-	vfp_sync_hwstate(thread);
 	__put_user_error(magic, &frame->magic, err);
 	__put_user_error(size, &frame->size, err);
 
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
-			      sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
+	if (err)
+		return -EFAULT;
 
-	/*
-	 * Copy the exception registers.
-	 */
-	__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
-	__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 static int restore_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	unsigned long magic;
 	unsigned long size;
-	unsigned long fpexc;
 	int err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
@@ -228,33 +207,7 @@
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
-				sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Sanitise and restore the exception registers.
-	 */
-	__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
-	/* Ensure the VFP is enabled. */
-	fpexc |= FPEXC_EN;
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-	h->fpexc = fpexc;
-
-	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 #endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index addbbe8..8f46446 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -251,8 +251,6 @@
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu = smp_processor_id();
 
-	printk("CPU%u: Booted secondary processor\n", cpu);
-
 	/*
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
@@ -264,6 +262,8 @@
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
 
+	printk("CPU%u: Booted secondary processor\n", cpu);
+
 	cpu_init();
 	preempt_disable();
 	trace_hardirqs_off();
@@ -510,10 +510,6 @@
 	local_fiq_disable();
 	local_irq_disable();
 
-#ifdef CONFIG_HOTPLUG_CPU
-	platform_cpu_kill(cpu);
-#endif
-
 	while (1)
 		cpu_relax();
 }
@@ -576,17 +572,25 @@
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static void smp_kill_cpus(cpumask_t *mask)
+{
+	unsigned int cpu;
+	for_each_cpu(cpu, mask)
+		platform_cpu_kill(cpu);
+}
+#else
+static void smp_kill_cpus(cpumask_t *mask) { }
+#endif
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
+	struct cpumask mask;
 
-	if (num_online_cpus() > 1) {
-		struct cpumask mask;
-		cpumask_copy(&mask, cpu_online_mask);
-		cpumask_clear_cpu(smp_processor_id(), &mask);
-
-		smp_cross_call(&mask, IPI_CPU_STOP);
-	}
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	smp_cross_call(&mask, IPI_CPU_STOP);
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
@@ -595,6 +599,8 @@
 
 	if (num_online_cpus() > 1)
 		pr_warning("SMP: failed to stop secondary CPUs\n");
+
+	smp_kill_cpus(&mask);
 }
 
 /*
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index d2b1779..76cbb05 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -115,7 +115,7 @@
 		  "Ir" (THREAD_START_SP - sizeof(regs)),
 		  "r" (&regs),
 		  "Ir" (sizeof(regs))
-		: "r0", "r1", "r2", "r3", "ip", "lr", "memory");
+		: "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
 
  out:
 	return ret;
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 99ce5c9..05774e5 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1173,7 +1173,6 @@
 		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index dd7f782..104ca40 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clockchips.h>
+#include <linux/export.h>
 
 #include <asm/mach/time.h>
 
@@ -176,6 +177,7 @@
 };
 
 void __iomem *at91_st_base;
+EXPORT_SYMBOL_GPL(at91_st_base);
 
 void __init at91rm9200_ioremap_st(u32 addr)
 {
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 11cbaa8..b2e4fe2 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -117,7 +117,7 @@
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	SZ_2M
+#define EK_FLASH_SIZE	SZ_8M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index c3f9944..065fed3 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -85,8 +85,6 @@
 		.flags	= IORESOURCE_MEM
 	},
 	[2] = {
-		.start	= AT91_PIN_PC11,
-		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
 			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
@@ -130,6 +128,8 @@
 
 static void __init ek_add_device_dm9000(void)
 {
+	struct resource *r = &dm9000_resource[2];
+
 	/* Configure chip-select 2 (DM9000) */
 	sam9_smc_configure(0, 2, &dm9000_smc_config);
 
@@ -139,6 +139,7 @@
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(AT91_PIN_PC11, 0);
 
+	r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
 	platform_device_register(&dm9000_device);
 }
 #else
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a0f4d74..6b69282 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -35,6 +35,7 @@
 #include "generic.h"
 
 void __iomem *at91_pmc_base;
+EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 /*
  * There's a lot more which can be done with clocks, including cpufreq
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 3660478..ea2c57a 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -25,7 +25,7 @@
 #define at91_pmc_write(field, value) \
 	__raw_writel(value, at91_pmc_base + field)
 #else
-.extern at91_aic_base
+.extern at91_pmc_base
 #endif
 
 #define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 97cc04d..f44a2e7 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -54,6 +54,7 @@
 }
 
 void __iomem *at91_ramc_base[2];
+EXPORT_SYMBOL_GPL(at91_ramc_base);
 
 void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
 {
@@ -292,6 +293,7 @@
 }
 
 void __iomem *at91_matrix_base;
+EXPORT_SYMBOL_GPL(at91_matrix_base);
 
 void __init at91_ioremap_matrix(u32 base_addr)
 {
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 22e4e0a..adbfb19 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,8 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
-static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
+static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
+static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
 
 static struct clk pll1_clk = {
 	.name = "PLL1",
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 0491cee..b8df521 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -232,6 +232,9 @@
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CPU_EXYNOS4210
+	select S5P_HRT
+	select CLKSRC_MMIO
+	select HAVE_SCHED_CLOCK
 	select S5P_GPIO_INT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -368,6 +371,7 @@
 
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
+	depends on ARCH_EXYNOS4
 	select CPU_EXYNOS4210
 	select USE_OF
 	select ARM_AMBA
@@ -380,6 +384,7 @@
 
 config MACH_EXYNOS5_DT
 	bool "SAMSUNG EXYNOS5 Machine using device tree"
+	depends on ARCH_EXYNOS5
 	select SOC_EXYNOS5250
 	select USE_OF
 	select ARM_AMBA
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index df54c2a..6efd1e5 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -497,25 +497,25 @@
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1202,7 +1202,7 @@
 static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_dout_mmc0.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1213,7 +1213,7 @@
 static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_dout_mmc1.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1224,7 +1224,7 @@
 static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_dout_mmc2.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1235,7 +1235,7 @@
 static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_dout_mmc3.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1340,10 +1340,10 @@
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index d013982..7ac6ff4 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -455,25 +455,25 @@
 		.ctrlbit	= (1 << 20),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -678,7 +678,7 @@
 	.name		= "dma",
 	.devname	= "dma-pl330.1",
 	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
+	.ctrlbit	= (1 << 2),
 };
 
 static struct clk exynos5_clk_mdma1 = {
@@ -813,7 +813,7 @@
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -824,7 +824,7 @@
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -835,7 +835,7 @@
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -846,7 +846,7 @@
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -990,10 +990,10 @@
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 8614aab..5ccd6e8 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -326,6 +326,11 @@
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -344,6 +349,11 @@
 	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
 	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -537,7 +547,9 @@
 {
 	int irq;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+#ifdef CONFIG_OF
+	of_irq_init(exynos4_dt_irq_match);
+#endif
 
 	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c
index b025db4..7903501 100644
--- a/arch/arm/mach-exynos/dev-dwmci.c
+++ b/arch/arm/mach-exynos/dev-dwmci.c
@@ -16,6 +16,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/mmc/dw_mmc.h>
 
 #include <plat/devs.h>
@@ -33,16 +34,8 @@
 }
 
 static struct resource exynos4_dwmci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_DWMCI,
-		.end	= EXYNOS4_PA_DWMCI + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DWMCI,
-		.end	= IRQ_DWMCI,
-		.flags	= IORESOURCE_IRQ,
-	}
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K),
+	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI),
 };
 
 static struct dw_mci_board exynos4_dwci_pdata = {
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 9bee853..591e785 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -212,6 +212,8 @@
 #define IRQ_MFC				EXYNOS4_IRQ_MFC
 #define IRQ_SDO				EXYNOS4_IRQ_SDO
 
+#define IRQ_I2S0			EXYNOS4_IRQ_I2S0
+
 #define IRQ_ADC				EXYNOS4_IRQ_ADC0
 #define IRQ_TC				EXYNOS4_IRQ_PEN0
 
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 024d38f..6e6d11f 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -89,6 +89,10 @@
 #define EXYNOS4_PA_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
+#define EXYNOS5_PA_MDMA0		0x10800000
+#define EXYNOS5_PA_MDMA1		0x11C10000
+#define EXYNOS5_PA_PDMA0		0x121A0000
+#define EXYNOS5_PA_PDMA1		0x121B0000
 
 #define EXYNOS4_PA_SYSMMU_MDMA		0x10A40000
 #define EXYNOS4_PA_SYSMMU_SSS		0x10A50000
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index e141c1f..d9578a5 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -255,9 +255,15 @@
 
 /* For EXYNOS5250 */
 
+#define EXYNOS5_APLL_LOCK			EXYNOS_CLKREG(0x00000)
 #define EXYNOS5_APLL_CON0			EXYNOS_CLKREG(0x00100)
 #define EXYNOS5_CLKSRC_CPU			EXYNOS_CLKREG(0x00200)
+#define EXYNOS5_CLKMUX_STATCPU			EXYNOS_CLKREG(0x00400)
 #define EXYNOS5_CLKDIV_CPU0			EXYNOS_CLKREG(0x00500)
+#define EXYNOS5_CLKDIV_CPU1			EXYNOS_CLKREG(0x00504)
+#define EXYNOS5_CLKDIV_STATCPU0			EXYNOS_CLKREG(0x00600)
+#define EXYNOS5_CLKDIV_STATCPU1			EXYNOS_CLKREG(0x00604)
+
 #define EXYNOS5_MPLL_CON0			EXYNOS_CLKREG(0x04100)
 #define EXYNOS5_CLKSRC_CORE1			EXYNOS_CLKREG(0x04204)
 
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 0d26f50..4711c89 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -45,7 +45,7 @@
 				"exynos4210-uart.3", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL),
+	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
 	{},
 };
 
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index b3982c8..ed90aef 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -112,6 +112,7 @@
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 				MMC_CAP_ERASE),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
@@ -307,49 +308,7 @@
 };
 
 /* TSP */
-static u8 mxt_init_vals[] = {
-	/* MXT_GEN_COMMAND(6) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_GEN_POWER(7) */
-	0x20, 0xff, 0x32,
-	/* MXT_GEN_ACQUIRE(8) */
-	0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
-	/* MXT_TOUCH_MULTI(9) */
-	0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00,
-	/* MXT_TOUCH_KEYARRAY(15) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00,
-	/* MXT_SPT_GPIOPWM(19) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_GRIPFACE(20) */
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
-	0x0f, 0x0a,
-	/* MXT_PROCG_NOISE(22) */
-	0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
-	0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
-	/* MXT_TOUCH_PROXIMITY(23) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_ONETOUCH(24) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_SPT_SELFTEST(25) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_TWOTOUCH(27) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_SPT_CTECONFIG(28) */
-	0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
-};
-
 static struct mxt_platform_data mxt_platform_data = {
-	.config			= mxt_init_vals,
-	.config_length		= ARRAY_SIZE(mxt_init_vals),
-
 	.x_line			= 18,
 	.y_line			= 11,
 	.x_size			= 1024,
@@ -571,7 +530,7 @@
 
 static struct regulator_init_data __initdata max8997_ldo8_data = {
 	.constraints	= {
-		.name		= "VUSB/VDAC_3.3V_C210",
+		.name		= "VUSB+VDAC_3.3V_C210",
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
@@ -1347,6 +1306,7 @@
 
 static void __init nuri_map_io(void)
 {
+	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
@@ -1379,7 +1339,6 @@
 	nuri_camera_init();
 
 	nuri_ehci_init();
-	clk_xusbxti.rate = 24000000;
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 6bb9dbd..a34036e 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -29,6 +29,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/iic.h>
@@ -39,6 +40,7 @@
 #include <plat/pd.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fimc-core.h>
+#include <plat/s5p-time.h>
 #include <plat/camport.h>
 #include <plat/mipi_csis.h>
 
@@ -746,6 +748,7 @@
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
@@ -1057,9 +1060,11 @@
 
 static void __init universal_map_io(void)
 {
+	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
+	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
 
 static void s5p_tv_setup(void)
@@ -1110,7 +1115,7 @@
 	.map_io		= universal_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
-	.timer		= &exynos4_timer,
+	.timer		= &s5p_timer,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 861ceb8..ed38d03 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -35,7 +35,7 @@
 static int __init imx27_avic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	irq_domain_add_simple(np, 0);
+	irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
 	return 0;
 }
 
@@ -44,7 +44,9 @@
 {
 	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
-	irq_domain_add_simple(np, gpio_irq_base);
+	gpio_irq_base -= 32;
+	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
+				NULL);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 05250ae..e10f391 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -35,7 +35,7 @@
 	}
 	clk_enable(gpc_dvfs_clk);
 	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-	if (tzic_enable_wake() != 0)
+	if (!tzic_enable_wake())
 		cpu_do_idle();
 	clk_disable(gpc_dvfs_clk);
 }
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 1c672d9..f7fe1b9 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/kexec.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/bridge-regs.h>
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 3698a37..26aac36 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -86,9 +86,6 @@
 static void __init halibut_fixup(struct tag *tags, char **cmdline,
 				 struct meminfo *mi)
 {
-	mi->nr_banks=1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = (101*1024*1024);
 }
 
 static void __init halibut_map_io(void)
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 962e711..fb3496a 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -17,6 +17,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
 
@@ -49,10 +50,22 @@
 	msm_map_msm8x60_io();
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+#endif
+
 static void __init msm8x60_init_irq(void)
 {
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
+	if (!of_have_populated_dt())
+		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+			 (void *)MSM_QGIC_CPU_BASE);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(msm_dt_gic_match);
+#endif
 
 	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
 	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
@@ -73,16 +86,8 @@
 	{}
 };
 
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", },
-	{}
-};
-
 static void __init msm8x60_dt_init(void)
 {
-	irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
-				GIC_SPI_START);
-
 	if (of_machine_is_compatible("qcom,msm8660-surf")) {
 		printk(KERN_INFO "Init surf UART registers\n");
 		msm8x60_init_uart12dm();
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index 25105c1..89bf6b4 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -12,6 +12,7 @@
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
+#include <asm/system_info.h>
 
 #include <mach/msm_fb.h>
 #include <mach/vreg.h>
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 5414f76..d4060a3 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/clkdev.h>
 
+#include <asm/system_info.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
index 67e701c..9980dc7 100644
--- a/arch/arm/mach-msm/proc_comm.c
+++ b/arch/arm/mach-msm/proc_comm.c
@@ -121,7 +121,7 @@
  * and unknown state. This function should be called early to
  * wait on the ARM9.
  */
-void __init proc_comm_boot_wait(void)
+void __devinit proc_comm_boot_wait(void)
 {
 	void __iomem *base = MSM_SHARED_RAM_BASE;
  
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index fcce7ff..cfd98b1 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -48,7 +48,7 @@
 	struct irq_chip *irq_chip = NULL;
 	int gpio, irq_num, fiq_count;
 
-	irq_desc = irq_to_desc(IH_GPIO_BASE);
+	irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
 	if (irq_desc)
 		irq_chip = irq_desc->irq_data.chip;
 
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 087dba0..e9cc52d 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
+#include <mach/hardware.h>
 
 #include <plat/mux.h>
 
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 6e90665..fb202af 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -47,9 +47,9 @@
 	int n = (pdev->id - 1) << 1;
 	u32 l;
 
-	l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
 	l |= source << n;
-	__raw_writel(l, MOD_CONF_CTRL_1);
+	omap_writel(l, MOD_CONF_CTRL_1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index a39fc4b..130ab00 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -20,6 +20,7 @@
 #include <linux/usb/otg.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/gpio_keys.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -560,7 +561,7 @@
 	},
 };
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
@@ -568,7 +569,7 @@
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_vibra_data twl6040_vibra = {
+static struct twl6040_vibra_data twl6040_vibra = {
 	.vibldrv_res = 8,
 	.vibrdrv_res = 3,
 	.viblmotor_res = 10,
@@ -577,16 +578,14 @@
 	.vddvibr_uV = 0,	/* fixed volt supply - VBAT */
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {
-	.audio		= &twl6040_audio,
 	/* Regulators */
 	.vusim		= &sdp4430_vusim,
 	.vaux1		= &sdp4430_vaux1,
@@ -617,7 +616,8 @@
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
 			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
+	omap4_pmic_init("twl6030", &sdp4430_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 74e1687..098d183 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -137,7 +137,7 @@
 
 static void __init omap4_i2c_init(void)
 {
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
+	omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
 }
 
 static void __init omap4_init(void)
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 930c0d3..740cee9 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -641,7 +641,7 @@
 
 static void __init igep_init(void)
 {
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	/* Get IGEP2 hardware revision */
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index d8c0e89..1b782ba 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
@@ -284,7 +285,7 @@
 	return 0;
 }
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
@@ -292,17 +293,14 @@
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata = {
-	.audio		= &twl6040_audio,
-};
+static struct twl4030_platform_data omap4_panda_twldata;
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -326,7 +324,8 @@
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
 			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &omap4_panda_twldata);
+	omap4_pmic_init("twl6030", &omap4_panda_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 7072e0d..3d9d746 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -165,83 +165,3 @@
 
 	return 0;
 }
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
- */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	const struct prcm_config *prcm;
-	int i = 0;
-	int tbl_sz = 0;
-
-	if (!cpu_is_omap24xx())
-		return;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sclk->rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		tbl_sz++;
-	}
-
-	/*
-	 * XXX Ensure that we're doing what CPUFreq expects for this error
-	 * case and the following one
-	 */
-	if (tbl_sz == 0) {
-		pr_warning("%s: no matching entries in rate_table\n",
-			   __func__);
-		return;
-	}
-
-	/* Include the CPUFREQ_TABLE_END terminator entry */
-	tbl_sz++;
-
-	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
-			     GFP_ATOMIC);
-	if (!freq_table) {
-		pr_err("%s: could not kzalloc frequency table\n", __func__);
-		return;
-	}
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sclk->rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
-	}
-
-	freq_table[i].index = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-}
-
-void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	if (!cpu_is_omap24xx())
-		return;
-
-	kfree(freq_table);
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index f57ed5b..d9f4931 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -536,10 +536,5 @@
 	.clk_set_rate		= omap2_clk_set_rate,
 	.clk_set_parent		= omap2_clk_set_parent,
 	.clk_disable_unused	= omap2_clk_disable_unused,
-#ifdef CONFIG_CPU_FREQ
-	/* These will be removed when the OPP code is integrated */
-	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
-	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
-#endif
 };
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b8c2a68..a1bb23a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -146,14 +146,6 @@
 extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
 
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
-extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#else
-#define omap2_clk_init_cpufreq_table	0
-#define omap2_clk_exit_cpufreq_table	0
-#endif
-
 extern const struct clkops clkops_omap2_iclk_dflt_wait;
 extern const struct clkops clkops_omap2_iclk_dflt;
 extern const struct clkops clkops_omap2_iclk_idle_only;
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
index 1e2d332..c88420d 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
@@ -941,10 +941,10 @@
 #define OMAP4_DSI2_LANEENABLE_MASK				(0x7 << 29)
 #define OMAP4_DSI1_LANEENABLE_SHIFT				24
 #define OMAP4_DSI1_LANEENABLE_MASK				(0x1f << 24)
-#define OMAP4_DSI2_PIPD_SHIFT					19
-#define OMAP4_DSI2_PIPD_MASK					(0x1f << 19)
-#define OMAP4_DSI1_PIPD_SHIFT					14
-#define OMAP4_DSI1_PIPD_MASK					(0x1f << 14)
+#define OMAP4_DSI1_PIPD_SHIFT					19
+#define OMAP4_DSI1_PIPD_MASK					(0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT					14
+#define OMAP4_DSI2_PIPD_MASK					(0x1f << 14)
 
 /* CONTROL_MCBSPLP */
 #define OMAP4_ALBCTRLRX_FSX_SHIFT				31
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 2c27fdb..7144ae6 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1422,6 +1422,9 @@
 		goto dis_opt_clks;
 	_write_sysconfig(v, oh);
 
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
 	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
 		omap_test_timeout((omap_hwmod_read(oh,
 						    oh->class->sysc->syss_offs)
@@ -1903,10 +1906,20 @@
  */
 int omap_hwmod_softreset(struct omap_hwmod *oh)
 {
-	if (!oh)
+	u32 v;
+	int ret;
+
+	if (!oh || !(oh->_sysc_cache))
 		return -EINVAL;
 
-	return _ocp_softreset(oh);
+	v = oh->_sysc_cache;
+	ret = _set_softreset(oh, &v);
+	if (ret)
+		goto error;
+	_write_sysconfig(v, oh);
+
+error:
+	return ret;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a5409ce..a6bde34 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1000,7 +1000,6 @@
 			.flags	= OMAP_FIREWALL_L4,
 		}
 	},
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c4f56cb..04a3885 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1049,7 +1049,6 @@
 	.slave		= &omap2430_dss_venc_hwmod,
 	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 34b9766d..db86ce9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1676,7 +1676,6 @@
 			.flags	= OMAP_FIREWALL_L4,
 		}
 	},
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index cc9bd10..6abc757 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2594,6 +2594,15 @@
 static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
+	/*
+	 * ISS needs 100 OCP clk cycles delay after a softreset before
+	 * accessing sysconfig again.
+	 * The lowest frequency at the moment for L3 bus is 100 MHz, so
+	 * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
+	 *
+	 * TODO: Indicate errata when available.
+	 */
+	.srst_udelay	= 2,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0cdd359..9fc2f44 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -108,8 +108,14 @@
 static void omap_uart_set_smartidle(struct platform_device *pdev)
 {
 	struct omap_device *od = to_omap_device(pdev);
+	u8 idlemode;
 
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
+	if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+		idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+	else
+		idlemode = HWMOD_IDLEMODE_SMART;
+
+	omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
 }
 
 #else
@@ -120,124 +126,8 @@
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
-static struct omap_device_pad default_uart1_pads[] __initdata = {
-	{
-		.name	= "uart1_cts.uart1_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rts.uart1_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_tx.uart1_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rx.uart1_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart2_pads[] __initdata = {
-	{
-		.name	= "uart2_cts.uart2_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rts.uart2_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_tx.uart2_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rx.uart2_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart3_pads[] __initdata = {
-	{
-		.name	= "uart3_cts_rctx.uart3_cts_rctx",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rts_sd.uart3_rts_sd",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_tx_irtx.uart3_tx_irtx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rx_irrx.uart3_rx_irrx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
-	{
-		.name   = "gpmc_wait2.uart4_tx",
-		.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "gpmc_wait3.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-	},
-};
-
-static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
-	{
-		.name	= "uart4_tx.uart4_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart4_rx.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
 {
-	switch (bdata->id) {
-	case 0:
-		bdata->pads = default_uart1_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
-		break;
-	case 1:
-		bdata->pads = default_uart2_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
-		break;
-	case 2:
-		bdata->pads = default_uart3_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
-		break;
-	case 3:
-		if (cpu_is_omap44xx()) {
-			bdata->pads = default_omap4_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap4_uart4_pads);
-		} else if (cpu_is_omap3630()) {
-			bdata->pads = default_omap36xx_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap36xx_uart4_pads);
-		}
-		break;
-	default:
-		break;
-	}
 }
 #else
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 4b57757..7a7b893 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -37,6 +37,16 @@
 	.flags		= I2C_CLIENT_WAKE,
 };
 
+static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
+	{
+		.addr		= 0x48,
+		.flags		= I2C_CLIENT_WAKE,
+	},
+	{
+		I2C_BOARD_INFO("twl6040", 0x4b),
+	},
+};
+
 void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
@@ -49,14 +59,31 @@
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+void __init omap4_pmic_init(const char *pmic_type,
+		    struct twl4030_platform_data *pmic_data,
+		    struct twl6040_platform_data *twl6040_data, int twl6040_irq)
+{
+	/* PMIC part*/
+	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
+		sizeof(omap4_i2c1_board_info[0].type));
+	omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
+	omap4_i2c1_board_info[0].platform_data = pmic_data;
+
+	/* TWL6040 audio IC part */
+	omap4_i2c1_board_info[1].irq = twl6040_irq;
+	omap4_i2c1_board_info[1].platform_data = twl6040_data;
+
+	omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
+
+}
+
 void __init omap_pmic_late_init(void)
 {
 	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
-	if (!pmic_i2c_board_info.irq)
-		return;
-
-	omap3_twl_init();
-	omap4_twl_init();
+	if (pmic_i2c_board_info.irq)
+		omap3_twl_init();
+	if (omap4_i2c1_board_info[0].irq)
+		omap4_twl_init();
 }
 
 #if defined(CONFIG_ARCH_OMAP3)
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 275dde8..0962748 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -29,6 +29,7 @@
 
 
 struct twl4030_platform_data;
+struct twl6040_platform_data;
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
@@ -46,12 +47,9 @@
 	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
 }
 
-static inline void omap4_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
-	omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
-}
+void omap4_pmic_init(const char *pmic_type,
+		    struct twl4030_platform_data *pmic_data,
+		    struct twl6040_platform_data *audio_data, int twl6040_irq);
 
 void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 			   u32 pdata_flags, u32 regulators_flags);
diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h
index eac6897..db70e79 100644
--- a/arch/arm/mach-orion5x/mpp.h
+++ b/arch/arm/mach-orion5x/mpp.h
@@ -65,8 +65,8 @@
 #define MPP8_GIGE               MPP(8,  0x1, 0, 0, 1,   1,   1)
 
 #define MPP9_UNUSED		MPP(9,  0x0, 0, 0, 1,   1,   1)
-#define MPP9_GPIO		MPP(9,  0x0, 0, 0, 1,   1,   1)
-#define MPP9_GIGE               MPP(9,  0x1, 1, 1, 1,   1,   1)
+#define MPP9_GPIO		MPP(9,  0x0, 1, 1, 1,   1,   1)
+#define MPP9_GIGE               MPP(9,  0x1, 0, 0, 1,   1,   1)
 
 #define MPP10_UNUSED		MPP(10, 0x0, 0, 0, 1,   1,   1)
 #define MPP10_GPIO		MPP(10, 0x0, 1, 1, 1,   1,   1)
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index 37c2de9..a7b9415 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -42,7 +42,8 @@
 static __init void sirfsoc_irq_init(void)
 {
 	sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32);
-	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, SIRFSOC_INTENAL_IRQ_END - 32);
+	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32,
+			SIRFSOC_INTENAL_IRQ_END + 1 - 32);
 
 	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
 	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
@@ -68,7 +69,8 @@
 	if (!sirfsoc_intc_base)
 		panic("unable to map intc cpu registers\n");
 
-	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
+	irq_domain_add_legacy(np, SIRFSOC_INTENAL_IRQ_END + 1, 0, 0,
+		&irq_domain_simple_ops, NULL);
 
 	of_node_put(np);
 
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index c54cef2..cbf51ae 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -17,6 +17,7 @@
  *
  * bit     23 - Input/Output (PXA2xx specific)
  * bit     24 - Wakeup Enable(PXA2xx specific)
+ * bit     25 - Keep Output  (PXA2xx specific)
  */
 
 #define MFP_DIR_IN		(0x0 << 23)
@@ -25,6 +26,12 @@
 #define MFP_DIR(x)		(((x) >> 23) & 0x1)
 
 #define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+
+/*
+ * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
+ * retain their last output level (low or high).
+ * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
+ */
 #define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
 
 #define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index b0a8428..ef0426a 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -33,6 +33,8 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
 #define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
 
 #define PWER_WE35	(1 << 24)
 
@@ -348,6 +350,7 @@
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_gplr[4];
 static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(void)
@@ -366,14 +369,26 @@
 	}
 
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_gplr[i] = GPLR(i * 32);
 		saved_pgsr[i] = PGSR(i);
 
-		GPDR(i * 32) = gpdr_lpm[i];
+		GPSR(i * 32) = PGSR(i);
+		GPCR(i * 32) = ~PGSR(i);
 	}
+
+	/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
+	for (i = 0; i < pxa_last_gpio; i++) {
+		if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
+		    ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+		     (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
+			GPDR(i) |= GPIO_bit(i);
+		else
+			GPDR(i) &= ~GPIO_bit(i);
+	}
+
 	return 0;
 }
 
@@ -384,6 +399,8 @@
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
+		GPSR(i * 32) = saved_gplr[i];
+		GPCR(i * 32) = ~saved_gplr[i];
 		GPDR(i * 32) = saved_gpdr[i];
 		PGSR(i) = saved_pgsr[i];
 	}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 6bce78e..4726c24 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -421,8 +421,11 @@
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
+static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
+	.gpio_set_wake = gpio_set_wake,
+};
+
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -458,6 +461,7 @@
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
+		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 0f3a327..b34287a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -111,10 +111,6 @@
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
-# cpu-specific sections
-
-if CPU_S3C2410
-
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -127,6 +123,10 @@
 	help
 	  Power Management code common to S3C2410 and better
 
+# cpu-specific sections
+
+if CPU_S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 86ce62f..b8337e2 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -33,8 +33,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
 static u8 pdma0_peri[] = {
 	DMACH_UART0_RX,
 	DMACH_UART0_TX,
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index a9ea64e..48d018f 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -484,8 +484,8 @@
 	.gpio_defaults[8] = 0x0100,
 	.gpio_defaults[9] = 0x0100,
 	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, &wm8994_ldo2_data },
 };
 
 /* GPIO I2C PMIC */
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 2cf5ed7..3239566 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -25,6 +25,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 #include <linux/interrupt.h>
 
 #include <asm/hardware/vic.h>
@@ -674,8 +675,8 @@
 	.gpio_defaults[8] = 0x0100,
 	.gpio_defaults[9] = 0x0100,
 	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, &wm8994_ldo2_data },
 };
 
 /* GPIO I2C PMIC */
@@ -765,6 +766,7 @@
 /* MoviNAND */
 static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
 	.max_width		= 4,
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 7c524b4..16be4c5 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -306,7 +306,7 @@
 }
 
 static struct resource sa1100_rtc_resources[] = {
-	DEFINE_RES_MEM(0x90010000, 0x9001003f),
+	DEFINE_RES_MEM(0x90010000, 0x40),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
 };
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index cb224a3..0891ec6 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -365,23 +365,13 @@
 };
 
 /* SDHI0 */
-static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg)
-{
-	struct device *dev = arg;
-	struct sh_mobile_sdhi_info *info = dev->platform_data;
-	struct tmio_mmc_data *pdata = info->pdata;
-
-	tmio_mmc_cd_wakeup(pdata);
-
-	return IRQ_HANDLED;
-}
-
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
+	.cd_gpio	= GPIO_PORT251,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -557,7 +547,6 @@
 	lcd_backlight_reset();
 
 	/* enable SDHI0 on CN15 [SD I/F] */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
 	gpio_request(GPIO_FN_SDHICMD0, NULL);
 	gpio_request(GPIO_FN_SDHICLK0, NULL);
@@ -566,13 +555,6 @@
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-	if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd,
-			 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			 "sdhi0 cd", &sdhi0_device.dev))
-		sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
-	else
-		pr_warn("Unable to setup SDHI0 GPIO IRQ\n");
-
 	/* enable SDHI1 on CN4 [WLAN I/F] */
 	gpio_request(GPIO_FN_SDHICLK1, NULL);
 	gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index f49e28a..8c6202b 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1011,21 +1011,12 @@
 }
 
 /* SDHI0 */
-static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg)
-{
-	struct device *dev = arg;
-	struct sh_mobile_sdhi_info *info = dev->platform_data;
-	struct tmio_mmc_data *pdata = info->pdata;
-
-	tmio_mmc_cd_wakeup(pdata);
-
-	return IRQ_HANDLED;
-}
-
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_flags	= TMIO_MMC_USE_GPIO_CD,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.cd_gpio	= GPIO_PORT172,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -1384,7 +1375,6 @@
 {
 	u32 srcr4;
 	struct clk *clk;
-	int ret;
 
 	/* External clock source */
 	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
@@ -1481,7 +1471,6 @@
 	irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
 
 	/* enable SDHI0 */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
 	gpio_request(GPIO_FN_SDHICMD0, NULL);
 	gpio_request(GPIO_FN_SDHICLK0, NULL);
@@ -1490,13 +1479,6 @@
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-	ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd,
-			  IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev);
-	if (!ret)
-		sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
-	else
-		pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret);
-
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 	/* enable SDHI1 */
 	gpio_request(GPIO_FN_SDHICMD1, NULL);
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 6ac015c..b202c12 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -16,6 +16,59 @@
 
 	__CPUINIT
 
+/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks!
+ *
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	ldr	r1, =0x7fff
+	and	r2, r1, r0, lsr #13
+
+	ldr	r1, =0x3ff
+
+	and	r3, r1, r0, lsr #3	@ NumWays - 1
+	add	r2, r2, #1		@ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4	@ SetShift
+
+	clz	r1, r3		@ WayShift
+	add	r4, r3, #1	@ NumWays
+1:	sub	r2, r2, #1	@ NumSets--
+	mov	r3, r4		@ Temp = NumWays
+2:	subs	r3, r3, #1	@ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb
+	isb
+	mov	pc, lr
+ENDPROC(v7_invalidate_l1)
+
+ENTRY(shmobile_invalidate_start)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(shmobile_invalidate_start)
+
 /*
  * Reset vector for secondary CPUs.
  * This will be mapped at address 0 by SBAR register.
@@ -24,4 +77,5 @@
 	.align  12
 ENTRY(shmobile_secondary_vector)
 	ldr     pc, 1f
-1:	.long   secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
+1:	.long   shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(shmobile_secondary_vector)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 83ad3fe..c85e6ec 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -4,7 +4,6 @@
 extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
 struct twd_local_timer;
-void shmobile_twd_init(struct twd_local_timer *twd_local_timer);
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
 extern int shmobile_platform_cpu_kill(unsigned int cpu);
@@ -82,5 +81,6 @@
 extern void r8a7779_secondary_init(unsigned int cpu);
 extern int r8a7779_boot_secondary(unsigned int cpu);
 extern void r8a7779_smp_prepare_cpus(void);
+extern void r8a7779_register_twd(void);
 
 #endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 12c6f52..e98e46f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -262,10 +262,14 @@
 			    ARRAY_SIZE(r8a7779_late_devices));
 }
 
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak r8a7779_register_twd(void) { }
+
 static void __init r8a7779_earlytimer_init(void)
 {
 	r8a7779_clock_init();
 	shmobile_earlytimer_init();
+	r8a7779_register_twd();
 }
 
 void __init r8a7779_add_early_devices(void)
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 5bebffc..04a0dfe 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -688,10 +688,14 @@
 			    ARRAY_SIZE(sh73a0_late_devices));
 }
 
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak sh73a0_register_twd(void) { }
+
 static void __init sh73a0_earlytimer_init(void)
 {
 	sh73a0_clock_init();
 	shmobile_earlytimer_init();
+	sh73a0_register_twd();
 }
 
 void __init sh73a0_add_early_devices(void)
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index b62e19d..6d1d023 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -64,8 +64,15 @@
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 
+void __init r8a7779_register_twd(void)
+{
+	twd_local_timer_register(&twd_local_timer);
+}
+#endif
+
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -84,7 +91,6 @@
 {
 	void __iomem *scu_base = scu_base_addr();
 
-	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 14ad8b05..e36c41c 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -42,7 +42,13 @@
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
+void __init sh73a0_register_twd(void)
+{
+	twd_local_timer_register(&twd_local_timer);
+}
+#endif
 
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
@@ -62,7 +68,6 @@
 {
 	void __iomem *scu_base = scu_base_addr();
 
-	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 2fba5f3..8b79e79 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -46,15 +46,6 @@
 {
 }
 
-void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer)
-{
-#ifdef CONFIG_HAVE_ARM_TWD
-	int err = twd_local_timer_register(twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-#endif
-}
-
 struct sys_timer shmobile_timer = {
 	.init		= shmobile_timer_init,
 };
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index fef66a7..f07488e 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -53,10 +53,10 @@
 
 void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value)
 {
-	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
+	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
 }
 
 void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value)
 {
-	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
+	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
 }
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 1621ad0..3333974 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1667,8 +1667,10 @@
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
+		 mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
+		 mask[1], mask[1]);
 }
 
 
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index a38f802..cb04bd6 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -146,9 +146,6 @@
 				.min_uV = 1800000,
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -160,9 +157,6 @@
 				.min_uV = 2500000,
 				.max_uV = 2500000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -230,8 +224,7 @@
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
+				REGULATOR_CHANGE_VOLTAGE,
 				.always_on = 1,
 				.boot_on = 1,
 			},
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index ee78a26..ec09c1e 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -12,101 +12,101 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		0
-#define IRQ_U300_INTCON1_START		32
+#define IRQ_U300_INTCON0_START		1
+#define IRQ_U300_INTCON1_START		33
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		0
-#define IRQ_U300_IRQ1_EXT		1
-#define IRQ_U300_DMA			2
-#define IRQ_U300_VIDEO_ENC_0		3
-#define IRQ_U300_VIDEO_ENC_1		4
-#define IRQ_U300_AAIF_RX		5
-#define IRQ_U300_AAIF_TX		6
-#define IRQ_U300_AAIF_VGPIO		7
-#define IRQ_U300_AAIF_WAKEUP		8
-#define IRQ_U300_PCM_I2S0_FRAME		9
-#define IRQ_U300_PCM_I2S0_FIFO		10
-#define IRQ_U300_PCM_I2S1_FRAME		11
-#define IRQ_U300_PCM_I2S1_FIFO		12
-#define IRQ_U300_XGAM_GAMCON		13
-#define IRQ_U300_XGAM_CDI		14
-#define IRQ_U300_XGAM_CDICON		15
+#define IRQ_U300_IRQ0_EXT		1
+#define IRQ_U300_IRQ1_EXT		2
+#define IRQ_U300_DMA			3
+#define IRQ_U300_VIDEO_ENC_0		4
+#define IRQ_U300_VIDEO_ENC_1		5
+#define IRQ_U300_AAIF_RX		6
+#define IRQ_U300_AAIF_TX		7
+#define IRQ_U300_AAIF_VGPIO		8
+#define IRQ_U300_AAIF_WAKEUP		9
+#define IRQ_U300_PCM_I2S0_FRAME		10
+#define IRQ_U300_PCM_I2S0_FIFO		11
+#define IRQ_U300_PCM_I2S1_FRAME		12
+#define IRQ_U300_PCM_I2S1_FIFO		13
+#define IRQ_U300_XGAM_GAMCON		14
+#define IRQ_U300_XGAM_CDI		15
+#define IRQ_U300_XGAM_CDICON		16
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
 /* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		16
+#define IRQ_U300_XGAM_MMIACC		17
 #endif
-#define IRQ_U300_XGAM_PDI		17
-#define IRQ_U300_XGAM_PDICON		18
-#define IRQ_U300_XGAM_GAMEACC		19
-#define IRQ_U300_XGAM_MCIDCT		20
-#define IRQ_U300_APEX			21
-#define IRQ_U300_UART0			22
-#define IRQ_U300_SPI			23
-#define IRQ_U300_TIMER_APP_OS		24
-#define IRQ_U300_TIMER_APP_DD		25
-#define IRQ_U300_TIMER_APP_GP1		26
-#define IRQ_U300_TIMER_APP_GP2		27
-#define IRQ_U300_TIMER_OS		28
-#define IRQ_U300_TIMER_MS		29
-#define IRQ_U300_KEYPAD_KEYBF		30
-#define IRQ_U300_KEYPAD_KEYBR		31
+#define IRQ_U300_XGAM_PDI		18
+#define IRQ_U300_XGAM_PDICON		19
+#define IRQ_U300_XGAM_GAMEACC		20
+#define IRQ_U300_XGAM_MCIDCT		21
+#define IRQ_U300_APEX			22
+#define IRQ_U300_UART0			23
+#define IRQ_U300_SPI			24
+#define IRQ_U300_TIMER_APP_OS		25
+#define IRQ_U300_TIMER_APP_DD		26
+#define IRQ_U300_TIMER_APP_GP1		27
+#define IRQ_U300_TIMER_APP_GP2		28
+#define IRQ_U300_TIMER_OS		29
+#define IRQ_U300_TIMER_MS		30
+#define IRQ_U300_KEYPAD_KEYBF		31
+#define IRQ_U300_KEYPAD_KEYBR		32
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		32
-#define IRQ_U300_GPIO_PORT1		33
-#define IRQ_U300_GPIO_PORT2		34
+#define IRQ_U300_GPIO_PORT0		33
+#define IRQ_U300_GPIO_PORT1		34
+#define IRQ_U300_GPIO_PORT2		35
 
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
     defined(CONFIG_MACH_U300_BS335)
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			35
-#define IRQ_U300_EVHIST			36
-#define IRQ_U300_MSPRO			37
-#define IRQ_U300_MMCSD_MCIINTR0		38
-#define IRQ_U300_MMCSD_MCIINTR1		39
-#define IRQ_U300_I2C0			40
-#define IRQ_U300_I2C1			41
-#define IRQ_U300_RTC			42
-#define IRQ_U300_NFIF			43
-#define IRQ_U300_NFIF2			44
+#define IRQ_U300_WDOG			36
+#define IRQ_U300_EVHIST			37
+#define IRQ_U300_MSPRO			38
+#define IRQ_U300_MMCSD_MCIINTR0		39
+#define IRQ_U300_MMCSD_MCIINTR1		40
+#define IRQ_U300_I2C0			41
+#define IRQ_U300_I2C1			42
+#define IRQ_U300_RTC			43
+#define IRQ_U300_NFIF			44
+#define IRQ_U300_NFIF2			45
 #endif
 
 /* DB3150 and DB3200 have only 45 IRQs */
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		45
+#define U300_VIC_IRQS_END		46
 #endif
 
 /* The DB3350-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0			45
-#define IRQ_U300_ISP_F1			46
-#define IRQ_U300_ISP_F2			47
-#define IRQ_U300_ISP_F3			48
-#define IRQ_U300_ISP_F4			49
-#define IRQ_U300_GPIO_PORT3		50
-#define IRQ_U300_SYSCON_PLL_LOCK	51
-#define IRQ_U300_UART1			52
-#define IRQ_U300_GPIO_PORT4		53
-#define IRQ_U300_GPIO_PORT5		54
-#define IRQ_U300_GPIO_PORT6		55
-#define U300_VIC_IRQS_END		56
+#define IRQ_U300_ISP_F0			46
+#define IRQ_U300_ISP_F1			47
+#define IRQ_U300_ISP_F2			48
+#define IRQ_U300_ISP_F3			49
+#define IRQ_U300_ISP_F4			50
+#define IRQ_U300_GPIO_PORT3		51
+#define IRQ_U300_SYSCON_PLL_LOCK	52
+#define IRQ_U300_UART1			53
+#define IRQ_U300_GPIO_PORT4		54
+#define IRQ_U300_GPIO_PORT5		55
+#define IRQ_U300_GPIO_PORT6		56
+#define U300_VIC_IRQS_END		57
 #endif
 
 /* The DB3210-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		35
-#define IRQ_U300_GPIO_PORT4		36
-#define IRQ_U300_WDOG			37
-#define IRQ_U300_EVHIST			38
-#define IRQ_U300_MSPRO			39
-#define IRQ_U300_MMCSD_MCIINTR0		40
-#define IRQ_U300_MMCSD_MCIINTR1		41
-#define IRQ_U300_I2C0			42
-#define IRQ_U300_I2C1			43
-#define IRQ_U300_RTC			44
-#define IRQ_U300_NFIF			45
-#define IRQ_U300_NFIF2			46
-#define IRQ_U300_SYSCON_PLL_LOCK	47
-#define U300_VIC_IRQS_END		48
+#define IRQ_U300_GPIO_PORT3		36
+#define IRQ_U300_GPIO_PORT4		37
+#define IRQ_U300_WDOG			38
+#define IRQ_U300_EVHIST			39
+#define IRQ_U300_MSPRO			40
+#define IRQ_U300_MMCSD_MCIINTR0		41
+#define IRQ_U300_MMCSD_MCIINTR1		42
+#define IRQ_U300_I2C0			43
+#define IRQ_U300_I2C1			44
+#define IRQ_U300_RTC			45
+#define IRQ_U300_NFIF			46
+#define IRQ_U300_NFIF2			47
+#define IRQ_U300_SYSCON_PLL_LOCK	48
+#define U300_VIC_IRQS_END		49
 #endif
 
 /* Maximum 8*7 GPIO lines */
@@ -117,6 +117,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-#define NR_IRQS				(IRQ_U300_GPIO_END)
+#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
 
 #endif
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 880d02e..ef7099e 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -17,6 +17,7 @@
 config UX500_SOC_DB8500
 	bool
 	select MFD_DB8500_PRCMU
+	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 	select CPU_FREQ_TABLE if CPU_FREQ
 
diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c
index 2b2d51c..0127490 100644
--- a/arch/arm/mach-ux500/mbox-db5500.c
+++ b/arch/arm/mach-ux500/mbox-db5500.c
@@ -168,7 +168,7 @@
 	return sprintf(buf, "0x%X\n", mbox_value);
 }
 
-static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
 
 static int mbox_show(struct seq_file *s, void *data)
 {
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index d2058ef..eff5842 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -99,7 +99,7 @@
 	 */
 	write_pen_release(cpu_logical_map(cpu));
 
-	gic_raise_softirq(cpumask_of(cpu), 1);
+	smp_send_reschedule(cpu);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7edef91..7c8a7d8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -723,7 +723,7 @@
 	bool "Select the High exception vector"
 	help
 	  Say Y here to select high exception vector(0xFFFF0000~).
-	  The exception vector can be vary depending on the platform
+	  The exception vector can vary depending on the platform
 	  design in nommu mode. If your platform needs to select
 	  high exception vector, say Y.
 	  Otherwise or if you are unsure, say N, and the low exception
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index ff1f7cc..8074199 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -26,18 +26,23 @@
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*
- * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103).
- * The test below covers all the write situations, including Java bytecodes
+ * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
  */
-	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
-	tst	r5, #PSR_J_BIT			@ Java?
+#ifdef CONFIG_ARM_ERRATA_326103
+	ldr	ip, =0x4107b36
+	mrc	p15, 0, r3, c0, c0, 0		@ get processor id
+	teq	ip, r3, lsr #4			@ r0 ARM1136?
 	bne	do_DataAbort
-	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
-	ldreq	r3, [r4]			@ read aborted ARM instruction
+	tst	r5, #PSR_J_BIT			@ Java?
+	tsteq	r5, #PSR_T_BIT			@ Thumb?
+	bne	do_DataAbort
+	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
+	ldr	r3, [r4]			@ read aborted ARM instruction
 #ifdef CONFIG_CPU_ENDIAN_BE8
-	reveq	r3, r3
+	rev	r3, r3
 #endif
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
+#endif
 	b	do_DataAbort
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index a53fd2a..2a8e380 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -32,6 +32,7 @@
 static DEFINE_RAW_SPINLOCK(l2x0_lock);
 static u32 l2x0_way_mask;	/* Bitmask of active ways */
 static u32 l2x0_size;
+static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
 
 struct l2x0_regs l2x0_saved_regs;
 
@@ -61,12 +62,7 @@
 {
 	void __iomem *base = l2x0_base;
 
-#ifdef CONFIG_PL310_ERRATA_753970
-	/* write to an unmmapped register */
-	writel_relaxed(0, base + L2X0_DUMMY_REG);
-#else
-	writel_relaxed(0, base + L2X0_CACHE_SYNC);
-#endif
+	writel_relaxed(0, base + sync_reg_offset);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -85,10 +81,13 @@
 }
 
 #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
+static inline void debug_writel(unsigned long val)
+{
+	if (outer_cache.set_debug)
+		outer_cache.set_debug(val);
+}
 
-#define debug_writel(val)	outer_cache.set_debug(val)
-
-static void l2x0_set_debug(unsigned long val)
+static void pl310_set_debug(unsigned long val)
 {
 	writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
 }
@@ -98,7 +97,7 @@
 {
 }
 
-#define l2x0_set_debug	NULL
+#define pl310_set_debug	NULL
 #endif
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -331,6 +330,11 @@
 		else
 			ways = 8;
 		type = "L310";
+#ifdef CONFIG_PL310_ERRATA_753970
+		/* Unmapped register. */
+		sync_reg_offset = L2X0_DUMMY_REG;
+#endif
+		outer_cache.set_debug = pl310_set_debug;
 		break;
 	case L2X0_CACHE_ID_PART_L210:
 		ways = (aux >> 13) & 0xf;
@@ -379,7 +383,6 @@
 	outer_cache.flush_all = l2x0_flush_all;
 	outer_cache.inv_all = l2x0_inv_all;
 	outer_cache.disable = l2x0_disable;
-	outer_cache.set_debug = l2x0_set_debug;
 
 	printk(KERN_INFO "%s cache controller enabled\n", type);
 	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 9055b5a..5bb4835 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -247,7 +247,9 @@
 	return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
 
 check_stack:
-	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
+	/* Don't allow expansion below FIRST_USER_ADDRESS */
+	if (vma->vm_flags & VM_GROWSDOWN &&
+	    addr >= FIRST_USER_ADDRESS && !expand_stack(vma, addr))
 		goto good_area;
 out:
 	return fault;
@@ -320,7 +322,7 @@
 	 */
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
-	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+	if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) {
 		if (fault & VM_FAULT_MAJOR) {
 			tsk->maj_flt++;
 			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 595079f..8f5813b 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -293,11 +293,11 @@
 #endif
 
 #ifndef CONFIG_SPARSEMEM
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 }
 #else
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 	struct memblock_region *reg;
 
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index b86f893..aa78de8 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -489,7 +489,8 @@
 	 */
 	for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 		mem_types[i].prot_pte |= PTE_EXT_AF;
-		mem_types[i].prot_sect |= PMD_SECT_AF;
+		if (mem_types[i].prot_sect)
+			mem_types[i].prot_sect |= PMD_SECT_AF;
 	}
 	kern_pgprot |= PTE_EXT_AF;
 	vecs_pgprot |= PTE_EXT_AF;
@@ -618,8 +619,8 @@
 	}
 }
 
-static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
-	unsigned long phys, const struct mem_type *type)
+static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
+	unsigned long end, unsigned long phys, const struct mem_type *type)
 {
 	pud_t *pud = pud_offset(pgd, addr);
 	unsigned long next;
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 6486d2f..d51225f 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -13,6 +13,7 @@
 #include <asm/sections.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+#include <asm/traps.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
@@ -39,6 +40,7 @@
  */
 void __init paging_init(struct machine_desc *mdesc)
 {
+	early_trap_init((void *)CONFIG_VECTORS_BASE);
 	bootmem_init();
 }
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index f1c8486..c2e2b66 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -255,6 +255,18 @@
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 #endif
+#ifndef CONFIG_ARM_THUMBEE
+	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
+	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field
+	teq	r0, #(1 << 12)			@ check if ThumbEE is present
+	bne	1f
+	mov	r5, #0
+	mcr	p14, 6, r5, c1, c0, 0		@ Initialize TEEHBR to 0
+	mrc	p14, 6, r0, c0, c0, 0		@ load TEECR
+	orr	r0, r0, #1			@ set the 1st bit in order to
+	mcr	p14, 6, r0, c0, c0, 0		@ stop userspace TEEHBR access
+1:
+#endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
 #ifdef CONFIG_CPU_ENDIAN_BE8
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 8506cbb..62ec5c4 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -398,32 +398,6 @@
 	.ops	= &clkops_null,
 };
 
-#ifdef CONFIG_CPU_FREQ
-void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	arch_clock->clk_init_cpufreq_table(table);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-
-void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	arch_clock->clk_exit_cpufreq_table(table);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-#endif
-
 /*
  *
  */
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index ecdb3da..c58d896 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -916,6 +916,13 @@
 			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
 	l |= OMAP_DMA_CCR_EN;
 
+	/*
+	 * As dma_write() uses IO accessors which are weakly ordered, there
+	 * is no guarantee that data in coherent DMA memory will be visible
+	 * to the DMA device.  Add a memory barrier here to ensure that any
+	 * such data is visible prior to enabling DMA.
+	 */
+	mb();
 	p->dma_write(l, CCR, lch);
 
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
@@ -965,6 +972,13 @@
 		p->dma_write(l, CCR, lch);
 	}
 
+	/*
+	 * Ensure that data transferred by DMA is visible to any access
+	 * after DMA has been disabled.  This is important for coherent
+	 * DMA regions.
+	 */
+	mb();
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[dma_lch_count];
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 240a7b9..d0ef57c 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -272,8 +272,6 @@
 #endif
 };
 
-struct cpufreq_frequency_table;
-
 struct clk_functions {
 	int		(*clk_enable)(struct clk *clk);
 	void		(*clk_disable)(struct clk *clk);
@@ -283,10 +281,6 @@
 	void		(*clk_allow_idle)(struct clk *clk);
 	void		(*clk_deny_idle)(struct clk *clk);
 	void		(*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
-	void		(*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
-#endif
 };
 
 extern int mpurate;
@@ -301,10 +295,6 @@
 extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#endif
 extern struct clk *omap_clk_get_by_name(const char *name);
 extern int omap_clk_enable_autoidle_all(void);
 extern int omap_clk_disable_autoidle_all(void);
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 8070145..3f26db4 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -305,6 +305,7 @@
  * @rev_offs: IP block revision register offset (from module base addr)
  * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
  * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @srst_udelay: Delay needed after doing a softreset in usecs
  * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
  * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
  * @clockact: the default value of the module CLOCKACTIVITY bits
@@ -330,9 +331,10 @@
 	u16 sysc_offs;
 	u16 syss_offs;
 	u16 sysc_flags;
+	struct omap_hwmod_sysc_fields *sysc_fields;
+	u8 srst_udelay;
 	u8 idlemodes;
 	u8 clockact;
-	struct omap_hwmod_sysc_fields *sysc_fields;
 };
 
 /**
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index eec98af..f9a8c53 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -348,7 +348,6 @@
 			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
-#ifdef CONFIG_PM
 void omap3_sram_restore_context(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
@@ -358,17 +357,18 @@
 			       omap3_sram_configure_core_dpll_sz);
 	omap_push_sram_idle();
 }
-#endif /* CONFIG_PM */
-
-#endif /* CONFIG_ARCH_OMAP3 */
 
 static inline int omap34xx_sram_init(void)
 {
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	omap3_sram_restore_context();
-#endif
 	return 0;
 }
+#else
+static inline int omap34xx_sram_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
 
 static inline int am33xx_sram_init(void)
 {
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 71553f4..a0ffc77d 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -302,6 +302,7 @@
 config SAMSUNG_PM_DEBUG
 	bool "S3C2410 PM Suspend debug"
 	depends on PM
+	select DEBUG_LL
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 317e246..e834c5e 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -18,6 +18,8 @@
 #ifndef __PLAT_S3C_SDHCI_H
 #define __PLAT_S3C_SDHCI_H __FILE__
 
+#include <plat/devs.h>
+
 struct platform_device;
 struct mmc_host;
 struct mmc_card;
@@ -356,4 +358,30 @@
 
 #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
 
+static inline void s3c_sdhci_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S3C_DEV_HSMMC
+	case 0:
+		s3c_device_hsmmc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	case 1:
+		s3c_device_hsmmc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	case 2:
+		s3c_device_hsmmc2.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	case 3:
+		s3c_device_hsmmc3.name = name;
+		break;
+#endif
+	}
+}
+
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 858748e..b0197b2 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -11,12 +11,15 @@
 #include <linux/types.h>
 #include <linux/cpu.h>
 #include <linux/cpu_pm.h>
+#include <linux/hardirq.h>
 #include <linux/kernel.h>
 #include <linux/notifier.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/uaccess.h>
+#include <linux/user.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -430,7 +433,10 @@
 
 static void vfp_enable(void *unused)
 {
-	u32 access = get_copro_access();
+	u32 access;
+
+	BUG_ON(preemptible());
+	access = get_copro_access();
 
 	/*
 	 * Enable full access to VFP (cp10 and cp11)
@@ -529,6 +535,93 @@
 }
 
 /*
+ * Save the current VFP state into the provided structures and prepare
+ * for entry into a new function (signal handler).
+ */
+int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
+				    struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	int err = 0;
+
+	/* Ensure that the saved hwstate is up-to-date. */
+	vfp_sync_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
+			      sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__put_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Copy the exception registers.
+	 */
+	__put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
+	__put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	if (err)
+		return -EFAULT;
+
+	/* Ensure that VFP is disabled. */
+	vfp_flush_hwstate(thread);
+
+	/*
+	 * As per the PCS, clear the length and stride bits for function
+	 * entry.
+	 */
+	hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
+	return 0;
+}
+
+/* Sanitise and restore the current VFP state from the provided structures. */
+int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
+			     struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	unsigned long fpexc;
+	int err = 0;
+
+	/* Disable VFP to avoid corrupting the new thread state. */
+	vfp_flush_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs,
+				sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__get_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Sanitise and restore the exception registers.
+	 */
+	__get_user_error(fpexc, &ufp_exc->fpexc, err);
+
+	/* Ensure the VFP is enabled. */
+	fpexc |= FPEXC_EN;
+
+	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
+	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+	hwstate->fpexc = fpexc;
+
+	__get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	return err ? -EFAULT : 0;
+}
+
+/*
  * VFP hardware can lose all context when a CPU goes offline.
  * As we will be running in SMP mode with CPU hotplug, we will save the
  * hardware state at every thread switch.  We clear our held state when
@@ -558,7 +651,7 @@
 	unsigned int cpu_arch = cpu_architecture();
 
 	if (cpu_arch >= CPU_ARCH_ARMv6)
-		vfp_enable(NULL);
+		on_each_cpu(vfp_enable, NULL, 1);
 
 	/*
 	 * First check that there is a VFP that we can use.
@@ -579,8 +672,6 @@
 	} else {
 		hotcpu_notifier(vfp_hotplug, 0);
 
-		smp_call_function(vfp_enable, NULL, 1);
-
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
 		printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
 			(vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 1633a6f..85038f5 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -38,7 +38,7 @@
 	.name = "rtc-bfin",
 	.id   = -1,
 };
-#endif
+#endif	/* CONFIG_RTC_DRV_BFIN */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -100,7 +100,7 @@
 		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_UART0 */
 #ifdef CONFIG_SERIAL_BFIN_UART1
 static struct resource bfin_uart1_resources[] = {
 	{
@@ -148,7 +148,7 @@
 		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_UART1 */
 #ifdef CONFIG_SERIAL_BFIN_UART2
 static struct resource bfin_uart2_resources[] = {
 	{
@@ -196,8 +196,8 @@
 		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 	},
 };
-#endif
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_UART2 */
+#endif	/* CONFIG_SERIAL_BFIN */
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -224,7 +224,7 @@
 	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
 	.resource = bfin_sir0_resources,
 };
-#endif
+#endif	/* CONFIG_BFIN_SIR0 */
 #ifdef CONFIG_BFIN_SIR1
 static struct resource bfin_sir1_resources[] = {
 	{
@@ -249,7 +249,7 @@
 	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
 	.resource = bfin_sir1_resources,
 };
-#endif
+#endif	/* CONFIG_BFIN_SIR1 */
 #ifdef CONFIG_BFIN_SIR2
 static struct resource bfin_sir2_resources[] = {
 	{
@@ -274,8 +274,8 @@
 	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
 	.resource = bfin_sir2_resources,
 };
-#endif
-#endif
+#endif	/* CONFIG_BFIN_SIR2 */
+#endif	/* CONFIG_BFIN_SIR */
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
@@ -311,7 +311,7 @@
 		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT0_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 static struct resource bfin_sport1_uart_resources[] = {
 	{
@@ -345,7 +345,7 @@
 		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT1_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 static struct resource bfin_sport2_uart_resources[] = {
 	{
@@ -379,7 +379,7 @@
 		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT2_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 static struct resource bfin_sport3_uart_resources[] = {
 	{
@@ -413,8 +413,8 @@
 		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
 	},
 };
-#endif
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT3_UART */
+#endif	/* CONFIG_SERIAL_BFIN_SPORT */
 
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 static unsigned short bfin_can_peripherals[] = {
@@ -452,7 +452,7 @@
 		.platform_data = &bfin_can_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_CAN_BFIN */
 
 /*
  *  USB-LAN EzExtender board
@@ -488,7 +488,7 @@
 		.platform_data	= &smc91x_info,
 	},
 };
-#endif
+#endif	/* CONFIG_SMC91X */
 
 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
@@ -518,7 +518,8 @@
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 };
-#endif
+#endif	/* CONFIG_MTD_M25P80 */
+#endif	/* CONFIG_SPI_BFIN5XX */
 
 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 #include <linux/spi/ad7879.h>
@@ -535,7 +536,7 @@
 	.gpio_export		= 1,	/* Export GPIO to gpiolib */
 	.gpio_base		= -1,	/* Dynamic allocation */
 };
-#endif
+#endif	/* CONFIG_TOUCHSCREEN_AD7879 */
 
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 #include <asm/bfin-lq035q1.h>
@@ -564,7 +565,7 @@
 		.platform_data = &bfin_lq035q1_data,
 	},
 };
-#endif
+#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
 
 static struct spi_board_info bf538_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
@@ -579,7 +580,7 @@
 		.controller_data = &spi_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
-#endif
+#endif	/* CONFIG_MTD_M25P80 */
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 	{
 		.modalias = "ad7879",
@@ -590,7 +591,7 @@
 		.chip_select = 1,
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
-#endif
+#endif	/* CONFIG_TOUCHSCREEN_AD7879_SPI */
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 	{
 		.modalias = "bfin-lq035q1-spi",
@@ -599,7 +600,7 @@
 		.chip_select = 2,
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
-#endif
+#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
@@ -607,7 +608,7 @@
 		.bus_num = 0,
 		.chip_select = 1,
 	},
-#endif
+#endif	/* CONFIG_SPI_SPIDEV */
 };
 
 /* SPI (0) */
@@ -716,8 +717,6 @@
 		},
 };
 
-#endif  /* spi master and devices */
-
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
 	[0] = {
@@ -759,8 +758,8 @@
 	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
 	.resource = bfin_twi1_resource,
 };
-#endif
-#endif
+#endif	/* CONFIG_BF542 */
+#endif	/* CONFIG_I2C_BLACKFIN_TWI */
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>
diff --git a/arch/c6x/include/asm/irq.h b/arch/c6x/include/asm/irq.h
index f13b78d..ab4577f 100644
--- a/arch/c6x/include/asm/irq.h
+++ b/arch/c6x/include/asm/irq.h
@@ -42,10 +42,6 @@
 /* This number is used when no interrupt has been assigned */
 #define NO_IRQ		0
 
-struct irq_data;
-extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
-extern irq_hw_number_t virq_to_hw(unsigned int virq);
-
 extern void __init init_pic_c64xplus(void);
 
 extern void init_IRQ(void);
diff --git a/arch/c6x/kernel/irq.c b/arch/c6x/kernel/irq.c
index 65b8ddf..c90fb5e 100644
--- a/arch/c6x/kernel/irq.c
+++ b/arch/c6x/kernel/irq.c
@@ -130,16 +130,3 @@
 	seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
 	return 0;
 }
-
-irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
-{
-	return d->hwirq;
-}
-EXPORT_SYMBOL_GPL(irqd_to_hwirq);
-
-irq_hw_number_t virq_to_hw(unsigned int virq)
-{
-	struct irq_data *irq_data = irq_get_irq_data(virq);
-	return WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
-}
-EXPORT_SYMBOL_GPL(virq_to_hw);
diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h
index 81c2e27..9b1a92b 100644
--- a/arch/frv/include/asm/processor.h
+++ b/arch/frv/include/asm/processor.h
@@ -135,10 +135,6 @@
 #define	KSTK_EIP(tsk)	((tsk)->thread.frame0->pc)
 #define	KSTK_ESP(tsk)	((tsk)->thread.frame0->sp)
 
-/* Allocation and freeing of basic task resources. */
-extern struct task_struct *alloc_task_struct_node(int node);
-extern void free_task_struct(struct task_struct *p);
-
 #define cpu_relax()    barrier()
 
 /* data cache prefetch */
diff --git a/arch/hexagon/kernel/dma.c b/arch/hexagon/kernel/dma.c
index 3730221..0f2367c 100644
--- a/arch/hexagon/kernel/dma.c
+++ b/arch/hexagon/kernel/dma.c
@@ -22,6 +22,7 @@
 #include <linux/bootmem.h>
 #include <linux/genalloc.h>
 #include <asm/dma-mapping.h>
+#include <linux/module.h>
 
 struct dma_map_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c
index 18c4f0b..ff02821 100644
--- a/arch/hexagon/kernel/process.c
+++ b/arch/hexagon/kernel/process.c
@@ -1,7 +1,7 @@
 /*
  * Process creation support for Hexagon
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -88,7 +88,7 @@
 void cpu_idle(void)
 {
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
 		local_irq_disable();
 		while (!need_resched()) {
 			idle_sleep();
@@ -97,7 +97,7 @@
 			local_irq_disable();
 		}
 		local_irq_enable();
-		tick_nohz_restart_sched_tick();
+		tick_nohz_idle_exit();
 		schedule();
 	}
 }
diff --git a/arch/hexagon/kernel/ptrace.c b/arch/hexagon/kernel/ptrace.c
index 32342de..96c3b2c 100644
--- a/arch/hexagon/kernel/ptrace.c
+++ b/arch/hexagon/kernel/ptrace.c
@@ -28,6 +28,7 @@
 #include <linux/ptrace.h>
 #include <linux/regset.h>
 #include <linux/user.h>
+#include <linux/elf.h>
 
 #include <asm/user.h>
 
diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c
index 9b44a9e..1298141 100644
--- a/arch/hexagon/kernel/smp.c
+++ b/arch/hexagon/kernel/smp.c
@@ -1,7 +1,7 @@
 /*
  * SMP support for Hexagon
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -28,6 +28,7 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
+#include <linux/cpu.h>
 
 #include <asm/time.h>    /*  timer_interrupt  */
 #include <asm/hexagon_vm.h>
@@ -177,7 +178,12 @@
 
 	printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu);
 
+	notify_cpu_starting(cpu);
+
+	ipi_call_lock();
 	set_cpu_online(cpu, true);
+	ipi_call_unlock();
+
 	local_irq_enable();
 
 	cpu_idle();
diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c
index 6bee15c..5d9b33b 100644
--- a/arch/hexagon/kernel/time.c
+++ b/arch/hexagon/kernel/time.c
@@ -28,6 +28,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/module.h>
 
 #include <asm/timer-regs.h>
 #include <asm/hexagon_vm.h>
diff --git a/arch/hexagon/kernel/vdso.c b/arch/hexagon/kernel/vdso.c
index f212a45..5d39f42 100644
--- a/arch/hexagon/kernel/vdso.c
+++ b/arch/hexagon/kernel/vdso.c
@@ -21,6 +21,7 @@
 #include <linux/err.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
+#include <linux/binfmts.h>
 
 #include <asm/vdso.h>
 
diff --git a/arch/ia64/include/asm/cmpxchg.h b/arch/ia64/include/asm/cmpxchg.h
index 4c96187..4f37dbb 100644
--- a/arch/ia64/include/asm/cmpxchg.h
+++ b/arch/ia64/include/asm/cmpxchg.h
@@ -1 +1,147 @@
-#include <asm/intrinsics.h>
+#ifndef _ASM_IA64_CMPXCHG_H
+#define _ASM_IA64_CMPXCHG_H
+
+/*
+ * Compare/Exchange, forked from asm/intrinsics.h
+ * which was:
+ *
+ *	Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+/* include compiler specific intrinsics */
+#include <asm/ia64regs.h>
+#ifdef __INTEL_COMPILER
+# include <asm/intel_intrin.h>
+#else
+# include <asm/gcc_intrin.h>
+#endif
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalid xchg().
+ */
+extern void ia64_xchg_called_with_bad_pointer(void);
+
+#define __xchg(x, ptr, size)						\
+({									\
+	unsigned long __xchg_result;					\
+									\
+	switch (size) {							\
+	case 1:								\
+		__xchg_result = ia64_xchg1((__u8 *)ptr, x);		\
+		break;							\
+									\
+	case 2:								\
+		__xchg_result = ia64_xchg2((__u16 *)ptr, x);		\
+		break;							\
+									\
+	case 4:								\
+		__xchg_result = ia64_xchg4((__u32 *)ptr, x);		\
+		break;							\
+									\
+	case 8:								\
+		__xchg_result = ia64_xchg8((__u64 *)ptr, x);		\
+		break;							\
+	default:							\
+		ia64_xchg_called_with_bad_pointer();			\
+	}								\
+	__xchg_result;							\
+})
+
+#define xchg(ptr, x)							\
+((__typeof__(*(ptr))) __xchg((unsigned long) (x), (ptr), sizeof(*(ptr))))
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern long ia64_cmpxchg_called_with_bad_pointer(void);
+
+#define ia64_cmpxchg(sem, ptr, old, new, size)				\
+({									\
+	__u64 _o_, _r_;							\
+									\
+	switch (size) {							\
+	case 1:								\
+		_o_ = (__u8) (long) (old);				\
+		break;							\
+	case 2:								\
+		_o_ = (__u16) (long) (old);				\
+		break;							\
+	case 4:								\
+		_o_ = (__u32) (long) (old);				\
+		break;							\
+	case 8:								\
+		_o_ = (__u64) (long) (old);				\
+		break;							\
+	default:							\
+		break;							\
+	}								\
+	switch (size) {							\
+	case 1:								\
+		_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_);	\
+		break;							\
+									\
+	case 2:								\
+		_r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_);	\
+		break;							\
+									\
+	case 4:								\
+		_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_);	\
+		break;							\
+									\
+	case 8:								\
+		_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_);	\
+		break;							\
+									\
+	default:							\
+		_r_ = ia64_cmpxchg_called_with_bad_pointer();		\
+		break;							\
+	}								\
+	(__typeof__(old)) _r_;						\
+})
+
+#define cmpxchg_acq(ptr, o, n)	\
+	ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
+#define cmpxchg_rel(ptr, o, n)	\
+	ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
+
+/* for compatibility with other platforms: */
+#define cmpxchg(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
+#define cmpxchg64(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
+
+#define cmpxchg_local		cmpxchg
+#define cmpxchg64_local		cmpxchg64
+
+#ifdef CONFIG_IA64_DEBUG_CMPXCHG
+# define CMPXCHG_BUGCHECK_DECL	int _cmpxchg_bugcheck_count = 128;
+# define CMPXCHG_BUGCHECK(v)						\
+do {									\
+	if (_cmpxchg_bugcheck_count-- <= 0) {				\
+		void *ip;						\
+		extern int printk(const char *fmt, ...);		\
+		ip = (void *) ia64_getreg(_IA64_REG_IP);		\
+		printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));\
+		break;							\
+	}								\
+} while (0)
+#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
+# define CMPXCHG_BUGCHECK_DECL
+# define CMPXCHG_BUGCHECK(v)
+#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_CMPXCHG_H */
diff --git a/arch/ia64/include/asm/futex.h b/arch/ia64/include/asm/futex.h
index 0ab82cc..d2bf1fd 100644
--- a/arch/ia64/include/asm/futex.h
+++ b/arch/ia64/include/asm/futex.h
@@ -106,15 +106,16 @@
 		return -EFAULT;
 
 	{
-		register unsigned long r8 __asm ("r8") = 0;
+		register unsigned long r8 __asm ("r8");
 		unsigned long prev;
 		__asm__ __volatile__(
 			"	mf;;					\n"
-			"	mov ar.ccv=%3;;				\n"
-			"[1:]	cmpxchg4.acq %0=[%1],%2,ar.ccv		\n"
+			"	mov %0=r0				\n"
+			"	mov ar.ccv=%4;;				\n"
+			"[1:]	cmpxchg4.acq %1=[%2],%3,ar.ccv		\n"
 			"	.xdata4 \"__ex_table\", 1b-., 2f-.	\n"
 			"[2:]"
-			: "=r" (prev)
+			: "=r" (r8), "=r" (prev)
 			: "r" (uaddr), "r" (newval),
 			  "rO" ((long) (unsigned) oldval)
 			: "memory");
diff --git a/arch/ia64/include/asm/intrinsics.h b/arch/ia64/include/asm/intrinsics.h
index e4076b5..d129e36 100644
--- a/arch/ia64/include/asm/intrinsics.h
+++ b/arch/ia64/include/asm/intrinsics.h
@@ -18,6 +18,7 @@
 #else
 # include <asm/gcc_intrin.h>
 #endif
+#include <asm/cmpxchg.h>
 
 #define ia64_native_get_psr_i()	(ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I)
 
@@ -81,119 +82,6 @@
 
 #define ia64_fetch_and_add(i,v)	(ia64_fetchadd(i, v, rel) + (i)) /* return new value */
 
-/*
- * This function doesn't exist, so you'll get a linker error if
- * something tries to do an invalid xchg().
- */
-extern void ia64_xchg_called_with_bad_pointer (void);
-
-#define __xchg(x,ptr,size)						\
-({									\
-	unsigned long __xchg_result;					\
-									\
-	switch (size) {							\
-	      case 1:							\
-		__xchg_result = ia64_xchg1((__u8 *)ptr, x);		\
-		break;							\
-									\
-	      case 2:							\
-		__xchg_result = ia64_xchg2((__u16 *)ptr, x);		\
-		break;							\
-									\
-	      case 4:							\
-		__xchg_result = ia64_xchg4((__u32 *)ptr, x);		\
-		break;							\
-									\
-	      case 8:							\
-		__xchg_result = ia64_xchg8((__u64 *)ptr, x);		\
-		break;							\
-	      default:							\
-		ia64_xchg_called_with_bad_pointer();			\
-	}								\
-	__xchg_result;							\
-})
-
-#define xchg(ptr,x)							     \
-  ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg().
- */
-extern long ia64_cmpxchg_called_with_bad_pointer (void);
-
-#define ia64_cmpxchg(sem,ptr,old,new,size)						\
-({											\
-	__u64 _o_, _r_;									\
-											\
-	switch (size) {									\
-	      case 1: _o_ = (__u8 ) (long) (old); break;				\
-	      case 2: _o_ = (__u16) (long) (old); break;				\
-	      case 4: _o_ = (__u32) (long) (old); break;				\
-	      case 8: _o_ = (__u64) (long) (old); break;				\
-	      default: break;								\
-	}										\
-	switch (size) {									\
-	      case 1:									\
-	      	_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      case 2:									\
-	       _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      case 4:									\
-	      	_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      case 8:									\
-		_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      default:									\
-		_r_ = ia64_cmpxchg_called_with_bad_pointer();				\
-		break;									\
-	}										\
-	(__typeof__(old)) _r_;								\
-})
-
-#define cmpxchg_acq(ptr, o, n)	\
-	ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
-#define cmpxchg_rel(ptr, o, n)	\
-	ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
-
-/* for compatibility with other platforms: */
-#define cmpxchg(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
-#define cmpxchg64(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
-
-#define cmpxchg_local		cmpxchg
-#define cmpxchg64_local		cmpxchg64
-
-#ifdef CONFIG_IA64_DEBUG_CMPXCHG
-# define CMPXCHG_BUGCHECK_DECL	int _cmpxchg_bugcheck_count = 128;
-# define CMPXCHG_BUGCHECK(v)							\
-  do {										\
-	if (_cmpxchg_bugcheck_count-- <= 0) {					\
-		void *ip;							\
-		extern int printk(const char *fmt, ...);			\
-		ip = (void *) ia64_getreg(_IA64_REG_IP);			\
-		printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));	\
-		break;								\
-	}									\
-  } while (0)
-#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
-# define CMPXCHG_BUGCHECK_DECL
-# define CMPXCHG_BUGCHECK(v)
-#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
-
 #endif
 
 #ifdef __KERNEL__
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 9d0fd7d..f00ba02 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -604,12 +604,6 @@
 	spin_unlock(&(x)->ctx_lock);
 }
 
-static inline unsigned int
-pfm_do_munmap(struct mm_struct *mm, unsigned long addr, size_t len, int acct)
-{
-	return do_munmap(mm, addr, len);
-}
-
 static inline unsigned long 
 pfm_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags, unsigned long exec)
 {
@@ -1458,8 +1452,9 @@
  * a PROTECT_CTX() section.
  */
 static int
-pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long size)
+pfm_remove_smpl_mapping(void *vaddr, unsigned long size)
 {
+	struct task_struct *task = current;
 	int r;
 
 	/* sanity checks */
@@ -1473,13 +1468,8 @@
 	/*
 	 * does the actual unmapping
 	 */
-	down_write(&task->mm->mmap_sem);
+	r = vm_munmap((unsigned long)vaddr, size);
 
-	DPRINT(("down_write done smpl_vaddr=%p size=%lu\n", vaddr, size));
-
-	r = pfm_do_munmap(task->mm, (unsigned long)vaddr, size, 0);
-
-	up_write(&task->mm->mmap_sem);
 	if (r !=0) {
 		printk(KERN_ERR "perfmon: [%d] unable to unmap sampling buffer @%p size=%lu\n", task_pid_nr(task), vaddr, size);
 	}
@@ -1945,7 +1935,7 @@
 	 * because some VM function reenables interrupts.
 	 *
 	 */
-	if (smpl_buf_vaddr) pfm_remove_smpl_mapping(current, smpl_buf_vaddr, smpl_buf_size);
+	if (smpl_buf_vaddr) pfm_remove_smpl_mapping(smpl_buf_vaddr, smpl_buf_size);
 
 	return 0;
 }
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index f5104b7..463fb3b 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1174,7 +1174,7 @@
 
 bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu)
 {
-	return irqchip_in_kernel(vcpu->kcm) == (vcpu->arch.apic != NULL);
+	return irqchip_in_kernel(vcpu->kvm) == (vcpu->arch.apic != NULL);
 }
 
 int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
diff --git a/arch/m68k/configs/m5275evb_defconfig b/arch/m68k/configs/m5275evb_defconfig
index 33c32ae..a1230e8 100644
--- a/arch/m68k/configs/m5275evb_defconfig
+++ b/arch/m68k/configs/m5275evb_defconfig
@@ -49,7 +49,6 @@
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
-CONFIG_FEC2=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y
diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c
index 2359478..09df4b8 100644
--- a/arch/m68k/platform/520x/config.c
+++ b/arch/m68k/platform/520x/config.c
@@ -22,7 +22,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m520x_qspi_init(void)
 {
@@ -35,7 +35,7 @@
 	writew(par, MCF_GPIO_PAR_UART);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -79,7 +79,7 @@
 	mach_sched_init = hw_timer_init;
 	m520x_uarts_init();
 	m520x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m520x_qspi_init();
 #endif
 }
diff --git a/arch/m68k/platform/523x/config.c b/arch/m68k/platform/523x/config.c
index c8b405d..d47dfd8 100644
--- a/arch/m68k/platform/523x/config.c
+++ b/arch/m68k/platform/523x/config.c
@@ -22,7 +22,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m523x_qspi_init(void)
 {
@@ -36,7 +36,7 @@
 	writew(par, MCFGPIO_PAR_TIMER);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -58,7 +58,7 @@
 {
 	mach_sched_init = hw_timer_init;
 	m523x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m523x_qspi_init();
 #endif
 }
diff --git a/arch/m68k/platform/5249/config.c b/arch/m68k/platform/5249/config.c
index bbf0513..300e729 100644
--- a/arch/m68k/platform/5249/config.c
+++ b/arch/m68k/platform/5249/config.c
@@ -51,7 +51,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m5249_qspi_init(void)
 {
@@ -61,7 +61,7 @@
 	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -90,7 +90,7 @@
 #ifdef CONFIG_M5249C3
 	m5249_smc91x_init();
 #endif
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m5249_qspi_init();
 #endif
 }
diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c
index 7ed848c..b3cb378 100644
--- a/arch/m68k/platform/527x/config.c
+++ b/arch/m68k/platform/527x/config.c
@@ -23,7 +23,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m527x_qspi_init(void)
 {
@@ -42,7 +42,7 @@
 #endif
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -74,9 +74,7 @@
 	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
 	v = readb(MCF_IPSBAR + 0x100078);
 	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
-#endif
 
-#ifdef CONFIG_FEC2
 	/* Set multi-function pins to ethernet mode for fec1 */
 	par = readw(MCF_IPSBAR + 0x100082);
 	writew(par | 0xa0, MCF_IPSBAR + 0x100082);
@@ -92,7 +90,7 @@
 	mach_sched_init = hw_timer_init;
 	m527x_uarts_init();
 	m527x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m527x_qspi_init();
 #endif
 }
diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c
index d449292..c5f11ba 100644
--- a/arch/m68k/platform/528x/config.c
+++ b/arch/m68k/platform/528x/config.c
@@ -24,7 +24,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m528x_qspi_init(void)
 {
@@ -32,7 +32,7 @@
 	__raw_writeb(0x07, MCFGPIO_PQSPAR);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -98,7 +98,7 @@
 	mach_sched_init = hw_timer_init;
 	m528x_uarts_init();
 	m528x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m528x_qspi_init();
 #endif
 }
diff --git a/arch/m68k/platform/532x/config.c b/arch/m68k/platform/532x/config.c
index 2bec347..37082d0 100644
--- a/arch/m68k/platform/532x/config.c
+++ b/arch/m68k/platform/532x/config.c
@@ -30,7 +30,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m532x_qspi_init(void)
 {
@@ -38,7 +38,7 @@
 	writew(0x01f0, MCF_GPIO_PAR_QSPI);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -77,7 +77,7 @@
 	mach_sched_init = hw_timer_init;
 	m532x_uarts_init();
 	m532x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m532x_qspi_init();
 #endif
 
diff --git a/arch/m68k/platform/68EZ328/Makefile b/arch/m68k/platform/68EZ328/Makefile
index ee97735..b44d799 100644
--- a/arch/m68k/platform/68EZ328/Makefile
+++ b/arch/m68k/platform/68EZ328/Makefile
@@ -3,9 +3,3 @@
 #
 
 obj-y := config.o
-
-extra-y := bootlogo.rh
-
-$(obj)/bootlogo.rh: $(src)/bootlogo.h
-	perl $(src)/../68328/bootlogo.pl < $(src)/bootlogo.h \
-		> $(obj)/bootlogo.rh
diff --git a/arch/m68k/platform/68VZ328/Makefile b/arch/m68k/platform/68VZ328/Makefile
index 447ffa0..a49d75e 100644
--- a/arch/m68k/platform/68VZ328/Makefile
+++ b/arch/m68k/platform/68VZ328/Makefile
@@ -3,14 +3,9 @@
 #
 
 obj-y		:= config.o
-logo-$(UCDIMM)	:= bootlogo.rh
-logo-$(DRAGEN2)	:= screen.h
-extra-y		:= $(logo-y)
-
-$(obj)/bootlogo.rh: $(src)/../68EZ328/bootlogo.h
-	perl $(src)/bootlogo.pl < $(src)/../68328/bootlogo.h > $(obj)/bootlogo.rh
+extra-$(DRAGEN2):= screen.h
 
 $(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl
 	perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h
 
-clean-files := $(obj)/screen.h $(obj)/bootlogo.rh
+clean-files := $(obj)/screen.h
diff --git a/arch/m68k/platform/68EZ328/bootlogo.h b/arch/m68k/platform/68VZ328/bootlogo.h
similarity index 99%
rename from arch/m68k/platform/68EZ328/bootlogo.h
rename to arch/m68k/platform/68VZ328/bootlogo.h
index e842bda..b38e2b2 100644
--- a/arch/m68k/platform/68EZ328/bootlogo.h
+++ b/arch/m68k/platform/68VZ328/bootlogo.h
@@ -1,6 +1,6 @@
 #define splash_width 640
 #define splash_height 480
-static unsigned char splash_bits[] = {
+unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = {
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c
index fa50c48..3aa77dd 100644
--- a/arch/m68k/platform/coldfire/device.c
+++ b/arch/m68k/platform/coldfire/device.c
@@ -114,14 +114,14 @@
 
 static struct platform_device mcf_fec1 = {
 	.name			= "fec",
-	.id			= 0,
+	.id			= 1,
 	.num_resources		= ARRAY_SIZE(mcf_fec1_resources),
 	.resource		= mcf_fec1_resources,
 };
 #endif /* MCFFEC_BASE1 */
 #endif /* CONFIG_FEC */
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 /*
  *	The ColdFire QSPI module is an SPI protocol hardware block used
  *	on a number of different ColdFire CPUs.
@@ -274,7 +274,7 @@
 	.resource		= mcf_qspi_resources,
 	.dev.platform_data	= &mcf_qspi_data,
 };
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_uart,
@@ -284,7 +284,7 @@
 	&mcf_fec1,
 #endif
 #endif
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	&mcf_qspi,
 #endif
 };
diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c
index e215070..9c717bf 100644
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -58,8 +58,8 @@
 
 static int ar933x_wmac_reset(void)
 {
-	ath79_device_reset_clear(AR933X_RESET_WMAC);
 	ath79_device_reset_set(AR933X_RESET_WMAC);
+	ath79_device_reset_clear(AR933X_RESET_WMAC);
 
 	return 0;
 }
diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h
index a865c98..5ad1a9c 100644
--- a/arch/mips/include/asm/mach-jz4740/irq.h
+++ b/arch/mips/include/asm/mach-jz4740/irq.h
@@ -45,7 +45,7 @@
 #define JZ4740_IRQ_LCD		JZ4740_IRQ(30)
 
 /* 2nd-level interrupts */
-#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(32) + (X))
+#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(32) + (x))
 
 #define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x))
 #define JZ4740_IRQ_GPIO(x)	(JZ4740_IRQ(48) + (x))
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index 73c0d45..9b02cfb 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -37,12 +37,6 @@
 		write_c0_xcontext((unsigned long) smp_processor_id() << 51); \
 	} while (0)
 
-
-static inline unsigned long get_current_pgd(void)
-{
-	return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL);
-}
-
 #else /* CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
 
 /*
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 185ca00..d5a338a 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -257,11 +257,8 @@
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -286,11 +283,8 @@
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -362,10 +356,7 @@
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -401,10 +392,7 @@
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
@@ -580,12 +568,7 @@
 	if (ret)
 		return ret;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return ret;
 }
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 06b5da3..ac3b8d8 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -290,11 +290,8 @@
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -318,11 +315,8 @@
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -488,10 +482,7 @@
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext32(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -529,10 +520,7 @@
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext32(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index ae29e89..86eb4b0 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -93,11 +93,8 @@
 	sigset_from_compat(&newset, &uset);
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -121,10 +118,7 @@
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c
index 910dddf..9cd69ad 100644
--- a/arch/mn10300/kernel/smp.c
+++ b/arch/mn10300/kernel/smp.c
@@ -24,6 +24,7 @@
 #include <linux/sched.h>
 #include <linux/profile.h>
 #include <linux/smp.h>
+#include <linux/cpu.h>
 #include <asm/tlbflush.h>
 #include <asm/bitops.h>
 #include <asm/processor.h>
@@ -38,7 +39,6 @@
 #include "internal.h"
 
 #ifdef CONFIG_HOTPLUG_CPU
-#include <linux/cpu.h>
 #include <asm/cacheflush.h>
 
 static unsigned long sleep_mode[NR_CPUS];
@@ -874,10 +874,13 @@
 
 	cpu = smp_processor_id();
 
-	local_irq_enable();
+	notify_cpu_starting(cpu);
 
+	ipi_call_lock();
 	set_cpu_online(cpu, true);
-	smp_wmb();
+	ipi_call_unlock();
+
+	local_irq_enable();
 }
 
 /**
diff --git a/arch/parisc/include/asm/hardware.h b/arch/parisc/include/asm/hardware.h
index 4e96268..d1d864b 100644
--- a/arch/parisc/include/asm/hardware.h
+++ b/arch/parisc/include/asm/hardware.h
@@ -2,7 +2,6 @@
 #define _PARISC_HARDWARE_H
 
 #include <linux/mod_devicetable.h>
-#include <asm/pdc.h>
 
 #define HWTYPE_ANY_ID		PA_HWTYPE_ANY_ID
 #define HVERSION_ANY_ID		PA_HVERSION_ANY_ID
@@ -95,12 +94,14 @@
 #define HPHW_MC	       15
 #define HPHW_FAULTY    31
 
+struct parisc_device_id;
 
 /* hardware.c: */
 extern const char *parisc_hardware_description(struct parisc_device_id *id);
 extern enum cpu_type parisc_get_cpu_type(unsigned long hversion);
 
 struct pci_dev;
+struct hardware_path;
 
 /* drivers.c: */
 extern struct parisc_device *alloc_pa_dev(unsigned long hpa,
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index a84cc1f..4e0e7db 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -160,5 +160,11 @@
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
+#include <asm/pdc.h>
+
+#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
+
+/* DEFINITION OF THE ZERO-PAGE (PAG0) */
+/* based on work by Jason Eckhardt (jason@equator.com) */
 
 #endif /* _PARISC_PAGE_H */
diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h
index 4ca510b..7f0f2d2 100644
--- a/arch/parisc/include/asm/pdc.h
+++ b/arch/parisc/include/asm/pdc.h
@@ -343,8 +343,6 @@
 
 #ifdef __KERNEL__
 
-#include <asm/page.h> /* for __PAGE_OFFSET */
-
 extern int pdc_type;
 
 /* Values for pdc_type */
@@ -677,11 +675,6 @@
 
 #endif /* __KERNEL__ */
 
-#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
-
-/* DEFINITION OF THE ZERO-PAGE (PAG0) */
-/* based on work by Jason Eckhardt (jason@equator.com) */
-
 /* flags of the device_path */
 #define	PF_AUTOBOOT	0x80
 #define	PF_AUTOSEARCH	0x40
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index 22dadeb..ee99f23 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -44,6 +44,8 @@
 
 #endif /* !__ASSEMBLY__ */
 
+#include <asm/page.h>
+
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
 #define pmd_ERROR(e) \
diff --git a/arch/parisc/include/asm/prefetch.h b/arch/parisc/include/asm/prefetch.h
index c5edc60..1ee7c82 100644
--- a/arch/parisc/include/asm/prefetch.h
+++ b/arch/parisc/include/asm/prefetch.h
@@ -21,7 +21,12 @@
 #define ARCH_HAS_PREFETCH
 static inline void prefetch(const void *addr)
 {
-	__asm__("ldw 0(%0), %%r0" : : "r" (addr));
+	__asm__(
+#ifndef CONFIG_PA20
+		/* Need to avoid prefetch of NULL on PA7300LC */
+		"	extrw,u,= %0,31,32,%%r0\n"
+#endif
+		"	ldw 0(%0), %%r0" : : "r" (addr));
 }
 
 /* LDD is a PA2.0 addition. */
diff --git a/arch/parisc/include/asm/spinlock.h b/arch/parisc/include/asm/spinlock.h
index 804aa28..3516e0b 100644
--- a/arch/parisc/include/asm/spinlock.h
+++ b/arch/parisc/include/asm/spinlock.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_SPINLOCK_H
 #define __ASM_SPINLOCK_H
 
+#include <asm/barrier.h>
+#include <asm/ldcw.h>
 #include <asm/processor.h>
 #include <asm/spinlock_types.h>
 
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 6f05944..5350342 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -581,7 +581,11 @@
 	 */
 	cmpiclr,=	0x01,\tmp,%r0
 	ldi		(_PAGE_DIRTY|_PAGE_READ|_PAGE_WRITE),\prot
+#ifdef CONFIG_64BIT
 	depd,z		\prot,8,7,\prot
+#else
+	depw,z		\prot,8,7,\prot
+#endif
 	/*
 	 * OK, it is in the temp alias region, check whether "from" or "to".
 	 * Check "subtle" note in pacache.S re: r23/r26.
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 93ff3d9..5d7218a 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -692,7 +692,7 @@
 
 	/* Purge any old translation */
 
-	pitlb		(%sr0,%r28)
+	pitlb		(%sr4,%r28)
 
 	ldil		L%icache_stride, %r1
 	ldw		R%icache_stride(%r1), %r1
@@ -706,27 +706,29 @@
 	sub		%r25, %r1, %r25
 
 
-1:      fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
+	/* fic only has the type 26 form on PA1.1, requiring an
+	 * explicit space specification, so use %sr4 */
+1:      fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
 	cmpb,COND(<<)		%r28, %r25,1b
-	fic,m		%r1(%r28)
+	fic,m		%r1(%sr4,%r28)
 
 	sync
 	bv		%r0(%r2)
-	pitlb		(%sr0,%r25)
+	pitlb		(%sr4,%r25)
 	.exit
 
 	.procend
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 4f00459..47341aa 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -50,6 +50,7 @@
 #include <linux/init.h>
 #include <linux/major.h>
 #include <linux/tty.h>
+#include <asm/page.h>		/* for PAGE0 */
 #include <asm/pdc.h>		/* for iodc_call() proto and friends */
 
 static DEFINE_SPINLOCK(pdc_console_lock);
@@ -104,7 +105,7 @@
 
 static void pdc_console_tty_close(struct tty_struct *tty, struct file *filp)
 {
-	if (!tty->count) {
+	if (tty->count == 1) {
 		del_timer_sync(&pdc_console_timer);
 		tty_port_tty_set(&tty_port, NULL);
 	}
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 0bb1d63..4dc7b79 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -31,6 +31,7 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/ftrace.h>
+#include <linux/cpu.h>
 
 #include <linux/atomic.h>
 #include <asm/current.h>
@@ -295,8 +296,13 @@
 
 		printk(KERN_CRIT "CPU#%d already initialized!\n", cpunum);
 		machine_halt();
-	}  
+	}
+
+	notify_cpu_starting(cpunum);
+
+	ipi_call_lock();
 	set_cpu_online(cpunum, true);
+	ipi_call_unlock();
 
 	/* Initialise the idle task for this CPU */
 	atomic_inc(&init_mm.mm_count);
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 7c07743..70e105d 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -29,6 +29,7 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/page.h>
 #include <asm/param.h>
 #include <asm/pdc.h>
 #include <asm/led.h>
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi
new file mode 100644
index 0000000..1cf0b77
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+message@42400 {
+	compatible = "fsl,mpic-v3.1-msgr";
+	reg = <0x42400 0x200>;
+	interrupts = <
+		0xb4 2 0 0
+		0xb5 2 0 0
+		0xb6 2 0 0
+		0xb7 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
index fdedf7b..71c30eb 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -53,6 +53,16 @@
 		      3 0 3 0>;
 };
 
+message@41400 {
+	compatible = "fsl,mpic-v3.1-msgr";
+	reg = <0x41400 0x200>;
+	interrupts = <
+		0xb0 2 0 0
+		0xb1 2 0 0
+		0xb2 2 0 0
+		0xb3 2 0 0>;
+};
+
 msi@41600 {
 	compatible = "fsl,mpic-msi";
 	reg = <0x41600 0x80>;
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 548da3a..d58fc4e 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -288,13 +288,6 @@
 /* Exception addition: Hard disable interrupts */
 #define DISABLE_INTS	SOFT_DISABLE_INTS(r10,r11)
 
-/* Exception addition: Keep interrupt state */
-#define ENABLE_INTS				\
-	ld	r11,PACAKMSR(r13);		\
-	ld	r12,_MSR(r1);			\
-	rlwimi	r11,r12,0,MSR_EE;		\
-	mtmsrd	r11,1
-
 #define ADD_NVGPRS				\
 	bl	.save_nvgprs
 
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index cf417e51..0e40843 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -18,10 +18,6 @@
 #include <linux/atomic.h>
 
 
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
-	for ((i) = 0; (i) < NR_IRQS; ++(i))
-
 extern atomic_t ppc_n_lost_interrupts;
 
 /* This number is used when no interrupt has been assigned */
@@ -33,8 +29,6 @@
 /* Same thing, used by the generic IRQ code */
 #define NR_IRQS_LEGACY		NUM_ISA_INTERRUPTS
 
-struct irq_data;
-extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
 extern irq_hw_number_t virq_to_hw(unsigned int virq);
 
 /**
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index aa795cc..fd07f43 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -81,12 +81,13 @@
 	u64 sdr1;
 	u64 hior;
 	u64 msr_mask;
-	u64 vsid_next;
 #ifdef CONFIG_PPC_BOOK3S_32
 	u32 vsid_pool[VSID_POOL_SIZE];
+	u32 vsid_next;
 #else
-	u64 vsid_first;
-	u64 vsid_max;
+	u64 proto_vsid_first;
+	u64 proto_vsid_max;
+	u64 proto_vsid_next;
 #endif
 	int context_id[SID_CONTEXTS];
 
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index c65b929..c9f698a 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -275,9 +275,6 @@
 	unsigned int		isu_mask;
 	/* Number of sources */
 	unsigned int		num_sources;
-	/* default senses array */
-	unsigned char		*senses;
-	unsigned int		senses_count;
 
 	/* vector numbers used for internal sources (ipi/timers) */
 	unsigned int		ipi_vecs[4];
@@ -415,21 +412,6 @@
 extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 			    phys_addr_t phys_addr);
 
-/* Set default sense codes
- *
- * @mpic:	controller
- * @senses:	array of sense codes
- * @count:	size of above array
- *
- * Optionally provide an array (indexed on hardware interrupt numbers
- * for this MPIC) of default sense codes for the chip. Those are linux
- * sense codes IRQ_TYPE_*
- *
- * The driver gets ownership of the pointer, don't dispose of it or
- * anything like that. __init only.
- */
-extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
-
 
 /* Initialize the controller. After this has been called, none of the above
  * should be called again for this mpic
diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h
index 3ec37dc..326d33c 100644
--- a/arch/powerpc/include/asm/mpic_msgr.h
+++ b/arch/powerpc/include/asm/mpic_msgr.h
@@ -13,6 +13,7 @@
 
 #include <linux/types.h>
 #include <linux/spinlock.h>
+#include <asm/smp.h>
 
 struct mpic_msgr {
 	u32 __iomem *base;
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index b86faa9..8a97aa7 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -15,11 +15,6 @@
 #ifndef __ASM_POWERPC_REG_BOOKE_H__
 #define __ASM_POWERPC_REG_BOOKE_H__
 
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-#endif /* CONFIG_BOOKE_WDT */
-
 /* Machine State Register (MSR) Fields */
 #define MSR_GS		(1<<28) /* Guest state */
 #define MSR_UCLE	(1<<26)	/* User-mode cache lock enable */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 3e57a00..ba3aeb4 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -206,40 +206,43 @@
 	andi.	r10,r10,MSR_EE		/* Did EE change? */
 	beq	1f
 
-	/* Save handler and return address into the 2 unused words
-	 * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
-	 * else can be recovered from the pt_regs except r3 which for
-	 * normal interrupts has been set to pt_regs and for syscalls
-	 * is an argument, so we temporarily use ORIG_GPR3 to save it
-	 */
-	stw	r9,8(r1)
-	stw	r11,12(r1)
-	stw	r3,ORIG_GPR3(r1)
 	/*
 	 * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
 	 * If from user mode there is only one stack frame on the stack, and
 	 * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
 	 * stack frame to make trace_hardirqs_off happy.
+	 *
+	 * This is handy because we also need to save a bunch of GPRs,
+	 * r3 can be different from GPR3(r1) at this point, r9 and r11
+	 * contains the old MSR and handler address respectively,
+	 * r4 & r5 can contain page fault arguments that need to be passed
+	 * along as well. r12, CCR, CTR, XER etc... are left clobbered as
+	 * they aren't useful past this point (aren't syscall arguments),
+	 * the rest is restored from the exception frame.
 	 */
+	stwu	r1,-32(r1)
+	stw	r9,8(r1)
+	stw	r11,12(r1)
+	stw	r3,16(r1)
+	stw	r4,20(r1)
+	stw	r5,24(r1)
 	andi.	r12,r12,MSR_PR
-	beq	11f
-	stwu	r1,-16(r1)
+	b	11f
 	bl	trace_hardirqs_off
-	addi	r1,r1,16
 	b	12f
-
 11:
 	bl	trace_hardirqs_off
 12:
+	lwz	r5,24(r1)
+	lwz	r4,20(r1)
+	lwz	r3,16(r1)
+	lwz	r11,12(r1)
+	lwz	r9,8(r1)
+	addi	r1,r1,32
 	lwz	r0,GPR0(r1)
-	lwz	r3,ORIG_GPR3(r1)
-	lwz	r4,GPR4(r1)
-	lwz	r5,GPR5(r1)
 	lwz	r6,GPR6(r1)
 	lwz	r7,GPR7(r1)
 	lwz	r8,GPR8(r1)
-	lwz	r9,8(r1)
-	lwz	r11,12(r1)
 1:	mtctr	r11
 	mtlr	r9
 	bctr				/* jump to handler */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index f8a7a1a..ef2074c 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -588,23 +588,19 @@
 fast_exc_return_irq:
 restore:
 	/*
-	 * This is the main kernel exit path, we first check if we
-	 * have to change our interrupt state.
+	 * This is the main kernel exit path. First we check if we
+	 * are about to re-enable interrupts
 	 */
 	ld	r5,SOFTE(r1)
 	lbz	r6,PACASOFTIRQEN(r13)
-	cmpwi	cr1,r5,0
-	cmpw	cr0,r5,r6
-	beq	cr0,4f
+	cmpwi	cr0,r5,0
+	beq	restore_irq_off
 
-	/* We do, handle disable first, which is easy */
-	bne	cr1,3f;
- 	li	r0,0
-	stb	r0,PACASOFTIRQEN(r13);
-	TRACE_DISABLE_INTS
-	b	4f
+	/* We are enabling, were we already enabled ? Yes, just return */
+	cmpwi	cr0,r6,1
+	beq	cr0,do_restore
 
-3:	/*
+	/*
 	 * We are about to soft-enable interrupts (we are hard disabled
 	 * at this point). We check if there's anything that needs to
 	 * be replayed first.
@@ -626,7 +622,7 @@
 	/*
 	 * Final return path. BookE is handled in a different file
 	 */
-4:
+do_restore:
 #ifdef CONFIG_PPC_BOOK3E
 	b	.exception_return_book3e
 #else
@@ -700,6 +696,25 @@
 #endif /* CONFIG_PPC_BOOK3E */
 
 	/*
+	 * We are returning to a context with interrupts soft disabled.
+	 *
+	 * However, we may also about to hard enable, so we need to
+	 * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
+	 * or that bit can get out of sync and bad things will happen
+	 */
+restore_irq_off:
+	ld	r3,_MSR(r1)
+	lbz	r7,PACAIRQHAPPENED(r13)
+	andi.	r0,r3,MSR_EE
+	beq	1f
+	rlwinm	r7,r7,0,~PACA_IRQ_HARD_DIS
+	stb	r7,PACAIRQHAPPENED(r13)
+1:	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13);
+	TRACE_DISABLE_INTS
+	b	do_restore
+
+	/*
 	 * Something did happen, check if a re-emit is needed
 	 * (this also clears paca->irq_happened)
 	 */
@@ -748,6 +763,9 @@
 #endif /* CONFIG_PPC_BOOK3E */
 1:	b	.ret_from_except /* What else to do here ? */
  
+
+
+3:
 do_work:
 #ifdef CONFIG_PREEMPT
 	andi.	r0,r3,MSR_PR	/* Returning to user mode? */
@@ -767,16 +785,6 @@
 	SOFT_DISABLE_INTS(r3,r4)
 1:	bl	.preempt_schedule_irq
 
-	/* Hard-disable interrupts again (and update PACA) */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	0
-#else
-	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
-	mtmsrd	r10,1
-#endif /* CONFIG_PPC_BOOK3E */
-	li	r0,PACA_IRQ_HARD_DIS
-	stb	r0,PACAIRQHAPPENED(r13)
-
 	/* Re-test flags and eventually loop */
 	clrrdi	r9,r1,THREAD_SHIFT
 	ld	r4,TI_FLAGS(r9)
@@ -787,14 +795,6 @@
 user_work:
 #endif /* CONFIG_PREEMPT */
 
-	/* Enable interrupts */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	1
-#else
-	ori	r10,r10,MSR_EE
-	mtmsrd	r10,1
-#endif /* CONFIG_PPC_BOOK3E */
-
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	1f
 	bl	.restore_interrupts
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index cb705fd..8f880bc 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -768,8 +768,8 @@
 	std	r3,_DAR(r1)
 	std	r4,_DSISR(r1)
 	bl	.save_nvgprs
+	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
 	bl	.alignment_exception
 	b	.ret_from_except
 
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 243dbab..641da9e 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -229,6 +229,19 @@
 	 */
 	if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
 		__hard_irq_disable();
+#ifdef CONFIG_TRACE_IRQFLAG
+	else {
+		/*
+		 * We should already be hard disabled here. We had bugs
+		 * where that wasn't the case so let's dbl check it and
+		 * warn if we are wrong. Only do that when IRQ tracing
+		 * is enabled as mfmsr() can be costly.
+		 */
+		if (WARN_ON(mfmsr() & MSR_EE))
+			__hard_irq_disable();
+	}
+#endif /* CONFIG_TRACE_IRQFLAG */
+
 	set_soft_enabled(0);
 
 	/*
@@ -260,11 +273,17 @@
  * if they are currently disabled. This is typically called before
  * schedule() or do_signal() when returning to userspace. We do it
  * in C to avoid the burden of dealing with lockdep etc...
+ *
+ * NOTE: This is called with interrupts hard disabled but not marked
+ * as such in paca->irq_happened, so we need to resync this.
  */
 void restore_interrupts(void)
 {
-	if (irqs_disabled())
+	if (irqs_disabled()) {
+		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
 		local_irq_enable();
+	} else
+		__hard_irq_enable();
 }
 
 #endif /* CONFIG_PPC64 */
@@ -330,14 +349,10 @@
 
 	alloc_cpumask_var(&mask, GFP_KERNEL);
 
-	for_each_irq(irq) {
+	for_each_irq_desc(irq, desc) {
 		struct irq_data *data;
 		struct irq_chip *chip;
 
-		desc = irq_to_desc(irq);
-		if (!desc)
-			continue;
-
 		data = irq_desc_get_irq_data(desc);
 		if (irqd_is_per_cpu(data))
 			continue;
@@ -560,12 +575,6 @@
 	local_irq_restore(flags);
 }
 
-irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
-{
-	return d->hwirq;
-}
-EXPORT_SYMBOL_GPL(irqd_to_hwirq);
-
 irq_hw_number_t virq_to_hw(unsigned int virq)
 {
 	struct irq_data *irq_data = irq_get_irq_data(virq);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index c957b12..5df7777 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -23,14 +23,11 @@
 
 void machine_kexec_mask_interrupts(void) {
 	unsigned int i;
+	struct irq_desc *desc;
 
-	for_each_irq(i) {
-		struct irq_desc *desc = irq_to_desc(i);
+	for_each_irq_desc(i, desc) {
 		struct irq_chip *chip;
 
-		if (!desc)
-			continue;
-
 		chip = irq_desc_get_chip(desc);
 		if (!chip)
 			continue;
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index f88698c..4937c96 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1235,7 +1235,7 @@
 	ctrl |= CTRL_RUNLATCH;
 	mtspr(SPRN_CTRLT, ctrl);
 
-	ti->local_flags |= TLF_RUNLATCH;
+	ti->local_flags |= _TLF_RUNLATCH;
 }
 
 /* Called with hard IRQs off */
@@ -1244,7 +1244,7 @@
 	struct thread_info *ti = current_thread_info();
 	unsigned long ctrl;
 
-	ti->local_flags &= ~TLF_RUNLATCH;
+	ti->local_flags &= ~_TLF_RUNLATCH;
 
 	ctrl = mfspr(SPRN_CTRLF);
 	ctrl &= ~CTRL_RUNLATCH;
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 9825f29..ec8a53f 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -150,6 +150,9 @@
 }
 
 #ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+
 /* Checks wdt=x and wdt_period=xx command-line option */
 notrace int __init early_parse_wdt(char *p)
 {
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 6aa0c66..1589723 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -248,7 +248,7 @@
 				   addr, regs->nip, regs->link, code);
 	}
 
-	if (!arch_irq_disabled_regs(regs))
+	if (arch_irqs_disabled() && !arch_irq_disabled_regs(regs))
 		local_irq_enable();
 
 	memset(&info, 0, sizeof(info));
@@ -1019,7 +1019,9 @@
 		return;
 	}
 
-	local_irq_enable();
+	/* We restore the interrupt state now */
+	if (!arch_irq_disabled_regs(regs))
+		local_irq_enable();
 
 #ifdef CONFIG_MATH_EMULATION
 	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
@@ -1069,6 +1071,10 @@
 {
 	int sig, code, fixed = 0;
 
+	/* We restore the interrupt state now */
+	if (!arch_irq_disabled_regs(regs))
+		local_irq_enable();
+
 	/* we don't implement logging of alignment exceptions */
 	if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS))
 		fixed = fix_alignment(regs);
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index 6f87f39..10fc8ec 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -194,14 +194,14 @@
 	backwards_map = !backwards_map;
 
 	/* Uh-oh ... out of mappings. Let's flush! */
-	if (vcpu_book3s->vsid_next == vcpu_book3s->vsid_max) {
-		vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+	if (vcpu_book3s->proto_vsid_next == vcpu_book3s->proto_vsid_max) {
+		vcpu_book3s->proto_vsid_next = vcpu_book3s->proto_vsid_first;
 		memset(vcpu_book3s->sid_map, 0,
 		       sizeof(struct kvmppc_sid_map) * SID_MAP_NUM);
 		kvmppc_mmu_pte_flush(vcpu, 0, 0);
 		kvmppc_mmu_flush_segments(vcpu);
 	}
-	map->host_vsid = vcpu_book3s->vsid_next++;
+	map->host_vsid = vsid_scramble(vcpu_book3s->proto_vsid_next++, 256M);
 
 	map->guest_vsid = gvsid;
 	map->valid = true;
@@ -319,9 +319,10 @@
 		return -1;
 	vcpu3s->context_id[0] = err;
 
-	vcpu3s->vsid_max = ((vcpu3s->context_id[0] + 1) << USER_ESID_BITS) - 1;
-	vcpu3s->vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
-	vcpu3s->vsid_next = vcpu3s->vsid_first;
+	vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
+				  << USER_ESID_BITS) - 1;
+	vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+	vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;
 
 	kvmppc_mmu_hpte_init(vcpu);
 
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index ddc485a..c3beaee 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -258,6 +258,8 @@
 			    !(memslot->userspace_addr & (s - 1))) {
 				start &= ~(s - 1);
 				pgsize = s;
+				get_page(hpage);
+				put_page(page);
 				page = hpage;
 			}
 		}
@@ -281,11 +283,8 @@
 	err = 0;
 
  out:
-	if (got) {
-		if (PageHuge(page))
-			page = compound_head(page);
+	if (got)
 		put_page(page);
-	}
 	return err;
 
  up_err:
@@ -678,8 +677,15 @@
 		SetPageDirty(page);
 
  out_put:
-	if (page)
-		put_page(page);
+	if (page) {
+		/*
+		 * We drop pages[0] here, not page because page might
+		 * have been set to the head page of a compound, but
+		 * we have to drop the reference on the correct tail
+		 * page to match the get inside gup()
+		 */
+		put_page(pages[0]);
+	}
 	return ret;
 
  out_unlock:
@@ -979,6 +985,7 @@
 			pa = *physp;
 		}
 		page = pfn_to_page(pa >> PAGE_SHIFT);
+		get_page(page);
 	} else {
 		hva = gfn_to_hva_memslot(memslot, gfn);
 		npages = get_user_pages_fast(hva, 1, 1, pages);
@@ -991,8 +998,6 @@
 		page = compound_head(page);
 		psize <<= compound_order(page);
 	}
-	if (!kvm->arch.using_mmu_notifiers)
-		get_page(page);
 	offset = gpa & (psize - 1);
 	if (nb_ret)
 		*nb_ret = psize - offset;
@@ -1003,7 +1008,6 @@
 {
 	struct page *page = virt_to_page(va);
 
-	page = compound_head(page);
 	put_page(page);
 }
 
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 01294a5..108d1f5 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1192,8 +1192,6 @@
 				continue;
 			pfn = physp[j] >> PAGE_SHIFT;
 			page = pfn_to_page(pfn);
-			if (PageHuge(page))
-				page = compound_head(page);
 			SetPageDirty(page);
 			put_page(page);
 		}
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index def880a..cec4dad 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -463,6 +463,7 @@
 				/* insert R and C bits from PTE */
 				rcbits = rev->guest_rpte & (HPTE_R_R|HPTE_R_C);
 				args[j] |= rcbits << (56 - 5);
+				hp[0] = 0;
 				continue;
 			}
 
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S
index 0676ae2..6e6e9ce 100644
--- a/arch/powerpc/kvm/book3s_segment.S
+++ b/arch/powerpc/kvm/book3s_segment.S
@@ -197,7 +197,8 @@
 	/* Save guest PC and MSR */
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
-	andi.	r0,r12,0x2
+	andi.	r0, r12, 0x2
+	cmpwi	cr1, r0, 0
 	beq	1f
 	mfspr	r3,SPRN_HSRR0
 	mfspr	r4,SPRN_HSRR1
@@ -250,6 +251,12 @@
 	beq	ld_last_prev_inst
 	cmpwi	r12, BOOK3S_INTERRUPT_ALIGNMENT
 	beq-	ld_last_inst
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	cmpwi	r12, BOOK3S_INTERRUPT_H_EMUL_ASSIST
+	beq-	ld_last_inst
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
+#endif
 
 	b	no_ld_last_inst
 
@@ -316,23 +323,17 @@
 	 * Having set up SRR0/1 with the address where we want
 	 * to continue with relocation on (potentially in module
 	 * space), we either just go straight there with rfi[d],
-	 * or we jump to an interrupt handler with bctr if there
-	 * is an interrupt to be handled first.  In the latter
-	 * case, the rfi[d] at the end of the interrupt handler
-	 * will get us back to where we want to continue.
+	 * or we jump to an interrupt handler if there is an
+	 * interrupt to be handled first.  In the latter case,
+	 * the rfi[d] at the end of the interrupt handler will
+	 * get us back to where we want to continue.
 	 */
 
-	cmpwi	r12, BOOK3S_INTERRUPT_EXTERNAL
-	beq	1f
-	cmpwi	r12, BOOK3S_INTERRUPT_DECREMENTER
-	beq	1f
-	cmpwi	r12, BOOK3S_INTERRUPT_PERFMON
-1:	mtctr	r12
-
 	/* Register usage at this point:
 	 *
 	 * R1       = host R1
 	 * R2       = host R2
+	 * R10      = raw exit handler id
 	 * R12      = exit handler id
 	 * R13      = shadow vcpu (32-bit) or PACA (64-bit)
 	 * SVCPU.*  = guest *
@@ -342,12 +343,25 @@
 	PPC_LL	r6, HSTATE_HOST_MSR(r13)
 	PPC_LL	r8, HSTATE_VMHANDLER(r13)
 
-	/* Restore host msr -> SRR1 */
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	beq	cr1, 1f
+	mtspr	SPRN_HSRR1, r6
+	mtspr	SPRN_HSRR0, r8
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
+#endif
+1:	/* Restore host msr -> SRR1 */
 	mtsrr1	r6
 	/* Load highmem handler address */
 	mtsrr0	r8
 
 	/* RFI into the highmem handler, or jump to interrupt handler */
-	beqctr
+	cmpwi	r12, BOOK3S_INTERRUPT_EXTERNAL
+	beqa	BOOK3S_INTERRUPT_EXTERNAL
+	cmpwi	r12, BOOK3S_INTERRUPT_DECREMENTER
+	beqa	BOOK3S_INTERRUPT_DECREMENTER
+	cmpwi	r12, BOOK3S_INTERRUPT_PERFMON
+	beqa	BOOK3S_INTERRUPT_PERFMON
+
 	RFI
 kvmppc_handler_trampoline_exit_end:
diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
index af1ab5e..5c3cf2d 100644
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -48,7 +48,13 @@
 /*
  * Assembly helpers from arch/powerpc/net/bpf_jit.S:
  */
-extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+#define DECLARE_LOAD_FUNC(func)	\
+	extern u8 func[], func##_negative_offset[], func##_positive_offset[]
+
+DECLARE_LOAD_FUNC(sk_load_word);
+DECLARE_LOAD_FUNC(sk_load_half);
+DECLARE_LOAD_FUNC(sk_load_byte);
+DECLARE_LOAD_FUNC(sk_load_byte_msh);
 
 #define FUNCTION_DESCR_SIZE	24
 
diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S
index ff4506e..55ba385 100644
--- a/arch/powerpc/net/bpf_jit_64.S
+++ b/arch/powerpc/net/bpf_jit_64.S
@@ -31,14 +31,13 @@
  * then branch directly to slow_path_XXX if required.  (In fact, could
  * load a spare GPR with the address of slow_path_generic and pass size
  * as an argument, making the call site a mtlr, li and bllr.)
- *
- * Technically, the "is addr < 0" check is unnecessary & slowing down
- * the ABS path, as it's statically checked on generation.
  */
 	.globl	sk_load_word
 sk_load_word:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_word_neg
+	.globl	sk_load_word_positive_offset
+sk_load_word_positive_offset:
 	/* Are we accessing past headlen? */
 	subi	r_scratch1, r_HL, 4
 	cmpd	r_scratch1, r_addr
@@ -51,7 +50,9 @@
 	.globl	sk_load_half
 sk_load_half:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_half_neg
+	.globl	sk_load_half_positive_offset
+sk_load_half_positive_offset:
 	subi	r_scratch1, r_HL, 2
 	cmpd	r_scratch1, r_addr
 	blt	bpf_slow_path_half
@@ -61,7 +62,9 @@
 	.globl	sk_load_byte
 sk_load_byte:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_byte_neg
+	.globl	sk_load_byte_positive_offset
+sk_load_byte_positive_offset:
 	cmpd	r_HL, r_addr
 	ble	bpf_slow_path_byte
 	lbzx	r_A, r_D, r_addr
@@ -69,22 +72,20 @@
 
 /*
  * BPF_S_LDX_B_MSH: ldxb  4*([offset]&0xf)
- * r_addr is the offset value, already known positive
+ * r_addr is the offset value
  */
 	.globl sk_load_byte_msh
 sk_load_byte_msh:
+	cmpdi	r_addr, 0
+	blt	bpf_slow_path_byte_msh_neg
+	.globl sk_load_byte_msh_positive_offset
+sk_load_byte_msh_positive_offset:
 	cmpd	r_HL, r_addr
 	ble	bpf_slow_path_byte_msh
 	lbzx	r_X, r_D, r_addr
 	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
 	blr
 
-bpf_error:
-	/* Entered with cr0 = lt */
-	li	r3, 0
-	/* Generated code will 'blt epilogue', returning 0. */
-	blr
-
 /* Call out to skb_copy_bits:
  * We'll need to back up our volatile regs first; we have
  * local variable space at r1+(BPF_PPC_STACK_BASIC).
@@ -136,3 +137,84 @@
 	lbz	r_X, BPF_PPC_STACK_BASIC+(2*8)(r1)
 	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
 	blr
+
+/* Call out to bpf_internal_load_pointer_neg_helper:
+ * We'll need to back up our volatile regs first; we have
+ * local variable space at r1+(BPF_PPC_STACK_BASIC).
+ * Allocate a new stack frame here to remain ABI-compliant in
+ * stashing LR.
+ */
+#define sk_negative_common(SIZE)				\
+	mflr	r0;						\
+	std	r0, 16(r1);					\
+	/* R3 goes in parameter space of caller's frame */	\
+	std	r_skb, (BPF_PPC_STACKFRAME+48)(r1);		\
+	std	r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1);		\
+	std	r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1);		\
+	stdu	r1, -BPF_PPC_SLOWPATH_FRAME(r1);		\
+	/* R3 = r_skb, as passed */				\
+	mr	r4, r_addr;					\
+	li	r5, SIZE;					\
+	bl	bpf_internal_load_pointer_neg_helper;		\
+	/* R3 != 0 on success */				\
+	addi	r1, r1, BPF_PPC_SLOWPATH_FRAME;			\
+	ld	r0, 16(r1);					\
+	ld	r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1);		\
+	ld	r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1);		\
+	mtlr	r0;						\
+	cmpldi	r3, 0;						\
+	beq	bpf_error_slow;	/* cr0 = EQ */			\
+	mr	r_addr, r3;					\
+	ld	r_skb, (BPF_PPC_STACKFRAME+48)(r1);		\
+	/* Great success! */
+
+bpf_slow_path_word_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_word_negative_offset
+sk_load_word_negative_offset:
+	sk_negative_common(4)
+	lwz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_half_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_half_negative_offset
+sk_load_half_negative_offset:
+	sk_negative_common(2)
+	lhz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_byte_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_byte_negative_offset
+sk_load_byte_negative_offset:
+	sk_negative_common(1)
+	lbz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_byte_msh_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_byte_msh_negative_offset
+sk_load_byte_msh_negative_offset:
+	sk_negative_common(1)
+	lbz	r_X, 0(r_addr)
+	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
+	blr
+
+bpf_error_slow:
+	/* fabricate a cr0 = lt */
+	li	r_scratch1, -1
+	cmpdi	r_scratch1, 0
+bpf_error:
+	/* Entered with cr0 = lt */
+	li	r3, 0
+	/* Generated code will 'blt epilogue', returning 0. */
+	blr
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index 73619d3..2dc8b14 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -127,6 +127,9 @@
 	PPC_BLR();
 }
 
+#define CHOOSE_LOAD_FUNC(K, func) \
+	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
+
 /* Assemble the body code between the prologue & epilogue. */
 static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 			      struct codegen_context *ctx,
@@ -391,21 +394,16 @@
 
 			/*** Absolute loads from packet header/data ***/
 		case BPF_S_LD_W_ABS:
-			func = sk_load_word;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_word);
 			goto common_load;
 		case BPF_S_LD_H_ABS:
-			func = sk_load_half;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_half);
 			goto common_load;
 		case BPF_S_LD_B_ABS:
-			func = sk_load_byte;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_byte);
 		common_load:
-			/*
-			 * Load from [K].  Reference with the (negative)
-			 * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported.
-			 */
+			/* Load from [K]. */
 			ctx->seen |= SEEN_DATAREF;
-			if ((int)K < 0)
-				return -ENOTSUPP;
 			PPC_LI64(r_scratch1, func);
 			PPC_MTLR(r_scratch1);
 			PPC_LI32(r_addr, K);
@@ -429,7 +427,7 @@
 		common_load_ind:
 			/*
 			 * Load from [X + K].  Negative offsets are tested for
-			 * in the helper functions, and result in a 'ret 0'.
+			 * in the helper functions.
 			 */
 			ctx->seen |= SEEN_DATAREF | SEEN_XREG;
 			PPC_LI64(r_scratch1, func);
@@ -443,13 +441,7 @@
 			break;
 
 		case BPF_S_LDX_B_MSH:
-			/*
-			 * x86 version drops packet (RET 0) when K<0, whereas
-			 * interpreter does allow K<0 (__load_pointer, special
-			 * ancillary data).  common_load returns ENOTSUPP if K<0,
-			 * so we fall back to interpreter & filter works.
-			 */
-			func = sk_load_byte_msh;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh);
 			goto common_load;
 			break;
 
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index 9fef530..67dac22 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -21,6 +21,12 @@
 	{ .compatible = "fsl,qe", },
 	{ .compatible = "fsl,cpm2", },
 	{ .compatible = "fsl,srio", },
+	/* So that the DMA channel nodes can be probed individually: */
+	{ .compatible = "fsl,eloplus-dma", },
+	/* For the PMC driver */
+	{ .compatible = "fsl,mpc8548-guts", },
+	/* Probably unnecessary? */
+	{ .compatible = "gpio-leds", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 9a6f044..d208ebc 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -399,12 +399,6 @@
 machine_arch_initcall(mpc8568_mds, board_fixups);
 machine_arch_initcall(mpc8569_mds, board_fixups);
 
-static struct of_device_id mpc85xx_ids[] = {
-	{ .compatible = "fsl,mpc8548-guts", },
-	{ .compatible = "gpio-leds", },
-	{},
-};
-
 static int __init mpc85xx_publish_devices(void)
 {
 	if (machine_is(mpc8568_mds))
@@ -412,10 +406,7 @@
 	if (machine_is(mpc8569_mds))
 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 
-	mpc85xx_common_publish_devices();
-	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
-
-	return 0;
+	return mpc85xx_common_publish_devices();
 }
 
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index e74b7cd..f700c81 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -460,18 +460,7 @@
 	pr_info("Freescale P1022 DS reference board\n");
 }
 
-static struct of_device_id __initdata p1022_ds_ids[] = {
-	/* So that the DMA channel nodes can be probed individually: */
-	{ .compatible = "fsl,eloplus-dma", },
-	{},
-};
-
-static int __init p1022_ds_publish_devices(void)
-{
-	mpc85xx_common_publish_devices();
-	return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
-}
-machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
+machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
 
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index db360fc..85825b5 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -114,7 +114,7 @@
 		pr_devel("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
-		if (msi < NR_IRQS && irq_get_chip_data(msi) == msic) {
+		if (msi < nr_irqs && irq_get_chip_data(msi) == msic) {
 			generic_handle_irq(msi);
 			msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
 		} else {
@@ -276,9 +276,6 @@
 	if (rc)
 		return rc;
 
-	/* We rely on being able to stash a virq in a u16 */
-	BUILD_BUG_ON(NR_IRQS > 65536);
-
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		virq = irq_create_direct_mapping(msic->irq_domain);
 		if (virq == NO_IRQ) {
@@ -392,7 +389,8 @@
 	}
 	memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
 
-	msic->irq_domain = irq_domain_add_nomap(dn, &msic_host_ops, msic);
+	/* We rely on being able to stash a virq in a u16, so limit irqs to < 65536 */
+	msic->irq_domain = irq_domain_add_nomap(dn, 65536, &msic_host_ops, msic);
 	if (!msic->irq_domain) {
 		printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n",
 		       dn->full_name);
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
index e5c3a2c..8c6dc42 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ b/arch/powerpc/platforms/cell/beat_interrupt.c
@@ -239,7 +239,7 @@
 	ppc_md.get_irq = beatic_get_irq;
 
 	/* Allocate an irq host */
-	beatic_host = irq_domain_add_nomap(NULL, &beatic_pic_host_ops, NULL);
+	beatic_host = irq_domain_add_nomap(NULL, 0, &beatic_pic_host_ops, NULL);
 	BUG_ON(beatic_host == NULL);
 	irq_set_default_host(beatic_host);
 }
@@ -248,6 +248,6 @@
 {
 	int	i;
 
-	for (i = 1; i < NR_IRQS; i++)
+	for (i = 1; i < nr_irqs; i++)
 		beat_destruct_irq_plug(i);
 }
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 996c5ff..03685a3 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -366,11 +366,20 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&host->lock, flags);
+
+	/*
+	 * If the timer is pending, that means we raced with the
+	 * irq, in which case we just return
+	 */
+	if (timer_pending(&host->timeout_timer))
+		goto skip;
+
 	kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
 	if (host->state != state_idle) {
 		host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
 		add_timer(&host->timeout_timer);
 	}
+ skip:
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 66ad93d..c4e6305 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -57,9 +57,9 @@
 
 static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
 
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+/* The max irq number this driver deals with is 128; see max_irqs */
+static DECLARE_BITMAP(ppc_lost_interrupts, 128);
+static DECLARE_BITMAP(ppc_cached_irq_mask, 128);
 static int pmac_irq_cascade = -1;
 static struct irq_domain *pmac_pic_host;
 
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index a81e5a8..b4ddaa3 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -192,7 +192,7 @@
 {
 	int rc = -ENOMEM;
 
-	psurge_host = irq_domain_add_nomap(NULL, &psurge_host_ops, NULL);
+	psurge_host = irq_domain_add_nomap(NULL, 0, &psurge_host_ops, NULL);
 
 	if (psurge_host)
 		psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 2a4ff86..5f3b232 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -753,9 +753,8 @@
 	unsigned cpu;
 	struct irq_domain *host;
 
-	host = irq_domain_add_nomap(NULL, &ps3_host_ops, NULL);
+	host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL);
 	irq_set_default_host(host);
-	irq_set_virq_count(PS3_PLUG_MAX + 1);
 
 	for_each_possible_cpu(cpu) {
 		struct ps3_private *pd = &per_cpu(ps3_private, cpu);
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index aadbe4f..178a5f3 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -30,9 +30,9 @@
 	  two or more partitions.
 
 config EEH
-	bool "PCI Extended Error Handling (EEH)" if EXPERT
+	bool
 	depends on PPC_PSERIES && PCI
-	default y if !EXPERT
+	default y
 
 config PSERIES_MSI
        bool
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 309d38e..a75e37d 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -1076,7 +1076,7 @@
 	pr_debug("EEH: Adding device %s\n", pci_name(dev));
 
 	dn = pci_device_to_OF_node(dev);
-	edev = pci_dev_to_eeh_dev(dev);
+	edev = of_node_to_eeh_dev(dn);
 	if (edev->pdev == dev) {
 		pr_debug("EEH: Already referenced !\n");
 		return;
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index d3be961..10386b6 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -51,8 +51,7 @@
 static intctl_cpm2_t __iomem *cpm2_intctl;
 
 static struct irq_domain *cpm2_pic_host;
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static unsigned long ppc_cached_irq_mask[2]; /* 2 32-bit registers */
 
 static const u_char irq_to_siureg[] = {
 	1, 1, 1, 1, 1, 1, 1, 1,
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index d5f5416..b724622 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -18,69 +18,45 @@
 extern int cpm_get_irq(struct pt_regs *regs);
 
 static struct irq_domain *mpc8xx_pic_host;
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static unsigned long mpc8xx_cached_irq_mask;
 static sysconf8xx_t __iomem *siu_reg;
 
-int cpm_get_irq(struct pt_regs *regs);
+static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d)
+{
+	return 0x80000000 >> irqd_to_hwirq(d);
+}
 
 static void mpc8xx_unmask_irq(struct irq_data *d)
 {
-	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static void mpc8xx_mask_irq(struct irq_data *d)
 {
-	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static void mpc8xx_ack(struct irq_data *d)
 {
-	int	bit;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	out_be32(&siu_reg->sc_sipend, 1 << (31-bit));
+	out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d));
 }
 
 static void mpc8xx_end_irq(struct irq_data *d)
 {
-	int bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
-	if (flow_type & IRQ_TYPE_EDGE_FALLING) {
-		irq_hw_number_t hw = (unsigned int)irqd_to_hwirq(d);
+	/* only external IRQ senses are programmable */
+	if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) {
 		unsigned int siel = in_be32(&siu_reg->sc_siel);
-
-		/* only external IRQ senses are programmable */
-		if ((hw & 1) == 0) {
-			siel |= (0x80000000 >> hw);
-			out_be32(&siu_reg->sc_siel, siel);
-			__irq_set_handler_locked(d->irq, handle_edge_irq);
-		}
+		siel |= mpc8xx_irqd_to_bit(d);
+		out_be32(&siu_reg->sc_siel, siel);
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
 	}
 	return 0;
 }
@@ -132,6 +108,9 @@
 		IRQ_TYPE_EDGE_FALLING,
 	};
 
+	if (intspec[0] > 0x1f)
+		return 0;
+
 	*out_hwirq = intspec[0];
 	if (intsize > 1 && intspec[1] < 4)
 		*out_flags = map_pic_senses[intspec[1]];
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9ac71eb..395af13 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -604,18 +604,14 @@
 }
 
 /* Determine if the linux irq is an IPI */
-static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq)
+static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int src)
 {
-	unsigned int src = virq_to_hw(irq);
-
 	return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
 }
 
 /* Determine if the linux irq is a timer */
-static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq)
+static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int src)
 {
-	unsigned int src = virq_to_hw(irq);
-
 	return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]);
 }
 
@@ -876,21 +872,45 @@
 	if (src >= mpic->num_sources)
 		return -EINVAL;
 
-	if (flow_type == IRQ_TYPE_NONE)
-		if (mpic->senses && src < mpic->senses_count)
-			flow_type = mpic->senses[src];
-	if (flow_type == IRQ_TYPE_NONE)
-		flow_type = IRQ_TYPE_LEVEL_LOW;
+	vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
 
+	/* We don't support "none" type */
+	if (flow_type == IRQ_TYPE_NONE)
+		flow_type = IRQ_TYPE_DEFAULT;
+
+	/* Default: read HW settings */
+	if (flow_type == IRQ_TYPE_DEFAULT) {
+		switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
+			       MPIC_INFO(VECPRI_SENSE_MASK))) {
+			case MPIC_INFO(VECPRI_SENSE_EDGE) |
+			     MPIC_INFO(VECPRI_POLARITY_POSITIVE):
+				flow_type = IRQ_TYPE_EDGE_RISING;
+				break;
+			case MPIC_INFO(VECPRI_SENSE_EDGE) |
+			     MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
+				flow_type = IRQ_TYPE_EDGE_FALLING;
+				break;
+			case MPIC_INFO(VECPRI_SENSE_LEVEL) |
+			     MPIC_INFO(VECPRI_POLARITY_POSITIVE):
+				flow_type = IRQ_TYPE_LEVEL_HIGH;
+				break;
+			case MPIC_INFO(VECPRI_SENSE_LEVEL) |
+			     MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
+				flow_type = IRQ_TYPE_LEVEL_LOW;
+				break;
+		}
+	}
+
+	/* Apply to irq desc */
 	irqd_set_trigger_type(d, flow_type);
 
+	/* Apply to HW */
 	if (mpic_is_ht_interrupt(mpic, src))
 		vecpri = MPIC_VECPRI_POLARITY_POSITIVE |
 			MPIC_VECPRI_SENSE_EDGE;
 	else
 		vecpri = mpic_type_to_vecpri(mpic, flow_type);
 
-	vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
 	vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) |
 			MPIC_INFO(VECPRI_SENSE_MASK));
 	vnew |= vecpri;
@@ -1026,7 +1046,7 @@
 	irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq);
 
 	/* Set default irq type */
-	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+	irq_set_irq_type(virq, IRQ_TYPE_DEFAULT);
 
 	/* If the MPIC was reset, then all vectors have already been
 	 * initialized.  Otherwise, a per source lazy initialization
@@ -1417,12 +1437,6 @@
 		mpic->num_sources = isu_first + mpic->isu_size;
 }
 
-void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
-{
-	mpic->senses = senses;
-	mpic->senses_count = count;
-}
-
 void __init mpic_init(struct mpic *mpic)
 {
 	int i, cpu;
@@ -1555,12 +1569,12 @@
 		return;
 
 	raw_spin_lock_irqsave(&mpic_lock, flags);
-	if (mpic_is_ipi(mpic, irq)) {
+	if (mpic_is_ipi(mpic, src)) {
 		reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
 			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_ipi_write(src - mpic->ipi_vecs[0],
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
-	} else if (mpic_is_tm(mpic, irq)) {
+	} else if (mpic_is_tm(mpic, src)) {
 		reg = mpic_tm_read(src - mpic->timer_vecs[0]) &
 			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_tm_write(src - mpic->timer_vecs[0],
diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index 6e7fa38..483d8fa 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -27,6 +27,7 @@
 
 static struct mpic_msgr **mpic_msgrs;
 static unsigned int mpic_msgr_count;
+static DEFINE_RAW_SPINLOCK(msgrs_lock);
 
 static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value)
 {
@@ -56,12 +57,11 @@
 	if (reg_num >= mpic_msgr_count)
 		return ERR_PTR(-ENODEV);
 
-	raw_spin_lock_irqsave(&msgr->lock, flags);
-	if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) {
-		msgr = mpic_msgrs[reg_num];
+	raw_spin_lock_irqsave(&msgrs_lock, flags);
+	msgr = mpic_msgrs[reg_num];
+	if (msgr->in_use == MSGR_FREE)
 		msgr->in_use = MSGR_INUSE;
-	}
-	raw_spin_unlock_irqrestore(&msgr->lock, flags);
+	raw_spin_unlock_irqrestore(&msgrs_lock, flags);
 
 	return msgr;
 }
@@ -228,7 +228,7 @@
 
 		reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i;
 		msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE;
-		msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET;
+		msgr->mer = (u32 *)((u8 *)msgr->base + MPIC_MSGR_MER_OFFSET);
 		msgr->in_use = MSGR_FREE;
 		msgr->num = i;
 		raw_spin_lock_init(&msgr->lock);
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index 49a3ece..702256a 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -22,6 +22,7 @@
 #include <linux/debugfs.h>
 #include <linux/slab.h>
 #include <linux/export.h>
+#include <asm/debug.h>
 #include <asm/prom.h>
 #include <asm/scom.h>
 
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index ea5e204..cd1d18d 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -188,6 +188,7 @@
 {
 	int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
 	unsigned int irq, virq;
+	struct irq_desc *desc;
 
 	/* If we used to be the default server, move to the new "boot_cpuid" */
 	if (hw_cpu == xics_default_server)
@@ -202,8 +203,7 @@
 	/* Allow IPIs again... */
 	icp_ops->set_priority(DEFAULT_PRIORITY);
 
-	for_each_irq(virq) {
-		struct irq_desc *desc;
+	for_each_irq_desc(virq, desc) {
 		struct irq_chip *chip;
 		long server;
 		unsigned long flags;
@@ -212,9 +212,8 @@
 		/* We can't set affinity on ISA interrupts */
 		if (virq < NUM_ISA_INTERRUPTS)
 			continue;
-		desc = irq_to_desc(virq);
 		/* We only need to migrate enabled IRQS */
-		if (!desc || !desc->action)
+		if (!desc->action)
 			continue;
 		if (desc->irq_data.domain != xics_host)
 			continue;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2b7c0fb..9015060 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -90,7 +90,6 @@
 	select HAVE_KERNEL_XZ
 	select HAVE_ARCH_MUTEX_CPU_RELAX
 	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
-	select HAVE_RCU_TABLE_FREE if SMP
 	select ARCH_SAVE_PAGE_KEYS if HIBERNATION
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 6cf8e26..1957a9d 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,8 +1,12 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
-CONFIG_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
@@ -14,16 +18,22 @@
 CONFIG_CGROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
 CONFIG_DEFAULT_DEADLINE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -34,18 +44,15 @@
 CONFIG_BINFMT_MISC=m
 CONFIG_CMM=m
 CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_PM=y
+CONFIG_CRASH_DUMP=y
 CONFIG_HIBERNATION=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_NET_KEY=y
-CONFIG_AFIUCV=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
-CONFIG_NET_SCTPPROBE=m
 CONFIG_L2TP=m
 CONFIG_L2TP_DEBUGFS=m
 CONFIG_VLAN_8021Q=y
@@ -84,15 +91,14 @@
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ZFCP=y
-CONFIG_ZFCP_DIF=y
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
 CONFIG_BONDING=m
+CONFIG_DUMMY=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
 CONFIG_VIRTIO_NET=y
 CONFIG_RAW_DRIVER=m
+CONFIG_VIRTIO_BALLOON=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
@@ -103,27 +109,21 @@
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_IBM_PARTITION=y
-CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_PROVE_RCU=y
 CONFIG_LOCK_STAT=y
 CONFIG_DEBUG_LOCKDEP=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_NOTIFIERS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_RCU_TRACE=y
 CONFIG_KPROBES_SANITY_TEST=y
 CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
 CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
 CONFIG_LATENCYTOP=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_PAGEALLOC=y
-# CONFIG_FTRACE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -173,4 +173,3 @@
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRC7=m
-CONFIG_VIRTIO_BALLOON=y
diff --git a/arch/s390/include/asm/facility.h b/arch/s390/include/asm/facility.h
index 1e5b27e..2ee66a6 100644
--- a/arch/s390/include/asm/facility.h
+++ b/arch/s390/include/asm/facility.h
@@ -38,12 +38,11 @@
 	unsigned long nr;
 
 	preempt_disable();
-	S390_lowcore.stfl_fac_list = 0;
 	asm volatile(
 		"	.insn s,0xb2b10000,0(0)\n" /* stfl */
 		"0:\n"
 		EX_TABLE(0b, 0b)
-		: "=m" (S390_lowcore.stfl_fac_list));
+		: "+m" (S390_lowcore.stfl_fac_list));
 	nr = 4; /* bytes stored by stfl */
 	memcpy(stfle_fac_list, &S390_lowcore.stfl_fac_list, 4);
 	if (S390_lowcore.stfl_fac_list & 0x01000000) {
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index 8eef9b5..78e3041 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -22,10 +22,7 @@
 
 unsigned long *page_table_alloc(struct mm_struct *, unsigned long);
 void page_table_free(struct mm_struct *, unsigned long *);
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
 void page_table_free_rcu(struct mmu_gather *, unsigned long *);
-void __tlb_remove_table(void *_table);
-#endif
 
 static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
 {
diff --git a/arch/s390/include/asm/swab.h b/arch/s390/include/asm/swab.h
index 6bdee21..a3e4ebb 100644
--- a/arch/s390/include/asm/swab.h
+++ b/arch/s390/include/asm/swab.h
@@ -77,7 +77,7 @@
 	
 	asm volatile(
 #ifndef __s390x__
-		"	icm	%0,2,%O+1(%R1)\n"
+		"	icm	%0,2,%O1+1(%R1)\n"
 		"	ic	%0,%1\n"
 		: "=&d" (result) : "Q" (*x) : "cc");
 #else /* __s390x__ */
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index c687a2c..775a5ee 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -30,14 +30,10 @@
 
 struct mmu_gather {
 	struct mm_struct *mm;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
 	struct mmu_table_batch *batch;
-#endif
 	unsigned int fullmm;
-	unsigned int need_flush;
 };
 
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
 struct mmu_table_batch {
 	struct rcu_head		rcu;
 	unsigned int		nr;
@@ -49,7 +45,6 @@
 
 extern void tlb_table_flush(struct mmu_gather *tlb);
 extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
-#endif
 
 static inline void tlb_gather_mmu(struct mmu_gather *tlb,
 				  struct mm_struct *mm,
@@ -57,29 +52,20 @@
 {
 	tlb->mm = mm;
 	tlb->fullmm = full_mm_flush;
-	tlb->need_flush = 0;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
 	tlb->batch = NULL;
-#endif
 	if (tlb->fullmm)
 		__tlb_flush_mm(mm);
 }
 
 static inline void tlb_flush_mmu(struct mmu_gather *tlb)
 {
-	if (!tlb->need_flush)
-		return;
-	tlb->need_flush = 0;
-	__tlb_flush_mm(tlb->mm);
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
 	tlb_table_flush(tlb);
-#endif
 }
 
 static inline void tlb_finish_mmu(struct mmu_gather *tlb,
 				  unsigned long start, unsigned long end)
 {
-	tlb_flush_mmu(tlb);
+	tlb_table_flush(tlb);
 }
 
 /*
@@ -105,10 +91,8 @@
 static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 				unsigned long address)
 {
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
 	if (!tlb->fullmm)
 		return page_table_free_rcu(tlb, (unsigned long *) pte);
-#endif
 	page_table_free(tlb->mm, (unsigned long *) pte);
 }
 
@@ -125,10 +109,8 @@
 #ifdef __s390x__
 	if (tlb->mm->context.asce_limit <= (1UL << 31))
 		return;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
 	if (!tlb->fullmm)
 		return tlb_remove_table(tlb, pmd);
-#endif
 	crst_table_free(tlb->mm, (unsigned long *) pmd);
 #endif
 }
@@ -146,10 +128,8 @@
 #ifdef __s390x__
 	if (tlb->mm->context.asce_limit <= (1UL << 42))
 		return;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
 	if (!tlb->fullmm)
 		return tlb_remove_table(tlb, pud);
-#endif
 	crst_table_free(tlb->mm, (unsigned long *) pud);
 #endif
 }
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index c27a072..adccd90 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -474,9 +474,9 @@
 	stck	__LC_LAST_UPDATE_CLOCK
 	spt	5f-.LPG0(%r13)
 	mvc	__LC_LAST_UPDATE_TIMER(8),5f-.LPG0(%r13)
+	xc	__LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
 #ifndef CONFIG_MARCH_G5
 	# check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
-	xc	__LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
 	.insn	s,0xb2b10000,__LC_STFL_FAC_LIST	# store facility list
 	tm	__LC_STFL_FAC_LIST,0x01	# stfle available ?
 	jz	0f
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index 1c2cdd5..8a22c27 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -118,9 +118,10 @@
 				         "a" (__do_softirq)
 				     : "0", "1", "2", "3", "4", "5", "14",
 				       "cc", "memory" );
-		} else
+		} else {
 			/* We are already on the async stack. */
 			__do_softirq();
+		}
 	}
 
 	local_irq_restore(flags);
@@ -192,11 +193,12 @@
 	int index = ext_hash(code);
 
 	spin_lock_irqsave(&ext_int_hash_lock, flags);
-	list_for_each_entry_rcu(p, &ext_int_hash[index], entry)
+	list_for_each_entry_rcu(p, &ext_int_hash[index], entry) {
 		if (p->code == code && p->handler == handler) {
 			list_del_rcu(&p->entry);
 			kfree_rcu(p, rcu);
 		}
+	}
 	spin_unlock_irqrestore(&ext_int_hash_lock, flags);
 	return 0;
 }
@@ -211,9 +213,10 @@
 
 	old_regs = set_irq_regs(regs);
 	irq_enter();
-	if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
+	if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) {
 		/* Serve timer interrupts first. */
 		clock_comparator_work();
+	}
 	kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++;
 	if (ext_code.code != 0x1004)
 		__get_cpu_var(s390_idle).nohz_delay = 1;
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 4640508..cb019f4 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -178,7 +178,7 @@
 	err = lcctl(cpuhw->state);
 	if (err) {
 		pr_err("Enabling the performance measuring unit "
-		       "failed with rc=%lx\n", err);
+		       "failed with rc=%x\n", err);
 		return;
 	}
 
@@ -203,7 +203,7 @@
 	err = lcctl(inactive);
 	if (err) {
 		pr_err("Disabling the performance measuring unit "
-		       "failed with rc=%lx\n", err);
+		       "failed with rc=%x\n", err);
 		return;
 	}
 
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
index 7bb15fc..e1335dc 100644
--- a/arch/s390/mm/maccess.c
+++ b/arch/s390/mm/maccess.c
@@ -61,21 +61,14 @@
 	return copied < 0 ? -EFAULT : 0;
 }
 
-/*
- * Copy memory in real mode (kernel to kernel)
- */
-int memcpy_real(void *dest, void *src, size_t count)
+static int __memcpy_real(void *dest, void *src, size_t count)
 {
 	register unsigned long _dest asm("2") = (unsigned long) dest;
 	register unsigned long _len1 asm("3") = (unsigned long) count;
 	register unsigned long _src  asm("4") = (unsigned long) src;
 	register unsigned long _len2 asm("5") = (unsigned long) count;
-	unsigned long flags;
 	int rc = -EFAULT;
 
-	if (!count)
-		return 0;
-	flags = __arch_local_irq_stnsm(0xf8UL);
 	asm volatile (
 		"0:	mvcle	%1,%2,0x0\n"
 		"1:	jo	0b\n"
@@ -86,7 +79,23 @@
 		  "+d" (_len2), "=m" (*((long *) dest))
 		: "m" (*((long *) src))
 		: "cc", "memory");
-	arch_local_irq_restore(flags);
+	return rc;
+}
+
+/*
+ * Copy memory in real mode (kernel to kernel)
+ */
+int memcpy_real(void *dest, void *src, size_t count)
+{
+	unsigned long flags;
+	int rc;
+
+	if (!count)
+		return 0;
+	local_irq_save(flags);
+	__arch_local_irq_stnsm(0xfbUL);
+	rc = __memcpy_real(dest, src, count);
+	local_irq_restore(flags);
 	return rc;
 }
 
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 373adf6..6e765bf 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -678,8 +678,6 @@
 	}
 }
 
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
-
 static void __page_table_free_rcu(void *table, unsigned bit)
 {
 	struct page *page;
@@ -733,7 +731,66 @@
 		free_pages((unsigned long) table, ALLOC_ORDER);
 }
 
-#endif
+static void tlb_remove_table_smp_sync(void *arg)
+{
+	/* Simply deliver the interrupt */
+}
+
+static void tlb_remove_table_one(void *table)
+{
+	/*
+	 * This isn't an RCU grace period and hence the page-tables cannot be
+	 * assumed to be actually RCU-freed.
+	 *
+	 * It is however sufficient for software page-table walkers that rely
+	 * on IRQ disabling. See the comment near struct mmu_table_batch.
+	 */
+	smp_call_function(tlb_remove_table_smp_sync, NULL, 1);
+	__tlb_remove_table(table);
+}
+
+static void tlb_remove_table_rcu(struct rcu_head *head)
+{
+	struct mmu_table_batch *batch;
+	int i;
+
+	batch = container_of(head, struct mmu_table_batch, rcu);
+
+	for (i = 0; i < batch->nr; i++)
+		__tlb_remove_table(batch->tables[i]);
+
+	free_page((unsigned long)batch);
+}
+
+void tlb_table_flush(struct mmu_gather *tlb)
+{
+	struct mmu_table_batch **batch = &tlb->batch;
+
+	if (*batch) {
+		__tlb_flush_mm(tlb->mm);
+		call_rcu_sched(&(*batch)->rcu, tlb_remove_table_rcu);
+		*batch = NULL;
+	}
+}
+
+void tlb_remove_table(struct mmu_gather *tlb, void *table)
+{
+	struct mmu_table_batch **batch = &tlb->batch;
+
+	if (*batch == NULL) {
+		*batch = (struct mmu_table_batch *)
+			__get_free_page(GFP_NOWAIT | __GFP_NOWARN);
+		if (*batch == NULL) {
+			__tlb_flush_mm(tlb->mm);
+			tlb_remove_table_one(table);
+			return;
+		}
+		(*batch)->nr = 0;
+	}
+	(*batch)->tables[(*batch)->nr++] = table;
+	if ((*batch)->nr == MAX_TABLE_BATCH)
+		tlb_table_flush(tlb);
+}
 
 /*
  * switch on pgstes for its userspace process (for kvm)
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index 37f2f4a..f4c1c20 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -11,7 +11,7 @@
 #include <linux/types.h>
 #include <asm/cmpxchg.h>
 
-#define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
+#define ATOMIC_INIT(i)	{ (i) }
 
 #define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v,i)		((v)->counter = (i))
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 324eef9..e99b104 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -86,7 +86,7 @@
 	pte_t *pte_k;
 
 	/* Make sure we are in vmalloc/module/P3 area: */
-	if (!(address >= VMALLOC_START && address < P3_ADDR_MAX))
+	if (!(address >= P3SEG && address < P3_ADDR_MAX))
 		return -1;
 
 	/*
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 38d48a5..9708851 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -269,4 +269,4 @@
 	return 0;
 }
 
-subsys_initcall(sunfire_init);
+fs_initcall(sunfire_init);
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index fea13c7..b93c2c9 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1264,4 +1264,4 @@
 	return vio_register_driver(&ds_driver);
 }
 
-subsys_initcall(ds_init);
+fs_initcall(ds_init);
diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
index aba6b95..19f5605 100644
--- a/arch/sparc/kernel/leon_pci.c
+++ b/arch/sparc/kernel/leon_pci.c
@@ -45,7 +45,6 @@
 
 void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
 {
-	struct leon_pci_info *info = pbus->sysdata;
 	struct pci_dev *dev;
 	int i, has_io, has_mem;
 	u16 cmd;
@@ -111,18 +110,6 @@
 	return pci_enable_resources(dev, mask);
 }
 
-struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
-{
-	/*
-	 * Currently the OpenBoot nodes are not connected with the PCI device,
-	 * this is because the LEON PROM does not create PCI nodes. Eventually
-	 * this will change and the same approach as pcic.c can be used to
-	 * match PROM nodes with pci devices.
-	 */
-	return NULL;
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
 void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
 {
 #ifdef CONFIG_PCI_DEBUG
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
index 1210fde..160cac9 100644
--- a/arch/sparc/kernel/leon_smp.c
+++ b/arch/sparc/kernel/leon_smp.c
@@ -23,6 +23,7 @@
 #include <linux/pm.h>
 #include <linux/delay.h>
 #include <linux/gfp.h>
+#include <linux/cpu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
@@ -78,6 +79,8 @@
 	local_flush_tlb_all();
 	leon_configure_cache_smp();
 
+	notify_cpu_starting(cpuid);
+
 	/* Get our local ticker going. */
 	smp_setup_percpu_timer();
 
diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S
index 77f1b95..9171fc2 100644
--- a/arch/sparc/kernel/rtrap_64.S
+++ b/arch/sparc/kernel/rtrap_64.S
@@ -20,11 +20,6 @@
 
 		.text
 		.align			32
-__handle_softirq:
-		call			do_softirq
-		 nop
-		ba,a,pt			%xcc, __handle_softirq_continue
-		 nop
 __handle_preemption:
 		call			schedule
 		 wrpr			%g0, RTRAP_PSTATE, %pstate
@@ -89,9 +84,7 @@
 		cmp			%l1, 0
 
 		/* mm/ultra.S:xcall_report_regs KNOWS about this load. */
-		bne,pn			%icc, __handle_softirq
 		 ldx			[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
-__handle_softirq_continue:
 rtrap_xcall:
 		sethi			%hi(0xf << 20), %l4
 		and			%l1, %l4, %l4
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 232df99..3ee51f1 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -566,15 +566,10 @@
 
 SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len)
 {
-	long ret;
-
 	if (invalid_64bit_range(addr, len))
 		return -EINVAL;
 
-	down_write(&current->mm->mmap_sem);
-	ret = do_munmap(current->mm, addr, len);
-	up_write(&current->mm->mmap_sem);
-	return ret;
+	return vm_munmap(addr, len);
 }
 
 extern unsigned long do_mremap(unsigned long addr,
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index 7705c67..df3155a 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -225,6 +225,8 @@
 	unsigned long g2;
 	int from_user = !(regs->psr & PSR_PS);
 	int fault, code;
+	unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+			      (write ? FAULT_FLAG_WRITE : 0));
 
 	if(text_fault)
 		address = regs->pc;
@@ -251,6 +253,7 @@
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
+retry:
 	down_read(&mm->mmap_sem);
 
 	/*
@@ -289,7 +292,11 @@
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -297,13 +304,29 @@
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
-		current->maj_flt++;
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
-	} else {
-		current->min_flt++;
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
+
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			current->maj_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ,
+				      1, regs, address);
+		} else {
+			current->min_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN,
+				      1, regs, address);
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/* No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
+
 	up_read(&mm->mmap_sem);
 	return;
 
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index 504c062..1fe0429 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -279,6 +279,7 @@
 	unsigned int insn = 0;
 	int si_code, fault_code, fault;
 	unsigned long address, mm_rss;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	fault_code = get_thread_fault_code();
 
@@ -333,6 +334,8 @@
 			insn = get_fault_insn(regs, insn);
 			goto handle_kernel_fault;
 		}
+
+retry:
 		down_read(&mm->mmap_sem);
 	}
 
@@ -423,7 +426,12 @@
 			goto bad_area;
 	}
 
-	fault = handle_mm_fault(mm, vma, address, (fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0);
+	flags |= ((fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -431,12 +439,27 @@
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
-		current->maj_flt++;
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
-	} else {
-		current->min_flt++;
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
+
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			current->maj_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ,
+				      1, regs, address);
+		} else {
+			current->min_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN,
+				      1, regs, address);
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/* No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
 	up_read(&mm->mmap_sem);
 
diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S
index b57a594..874162a 100644
--- a/arch/sparc/mm/ultra.S
+++ b/arch/sparc/mm/ultra.S
@@ -495,11 +495,11 @@
 	stx		%o7, [%g1 + GR_SNAP_O7]
 	stx		%i7, [%g1 + GR_SNAP_I7]
 	/* Don't try this at home kids... */
-	rdpr		%cwp, %g2
-	sub		%g2, 1, %g7
+	rdpr		%cwp, %g3
+	sub		%g3, 1, %g7
 	wrpr		%g7, %cwp
 	mov		%i7, %g7
-	wrpr		%g2, %cwp
+	wrpr		%g3, %cwp
 	stx		%g7, [%g1 + GR_SNAP_RPC]
 	sethi		%hi(trap_block), %g7
 	or		%g7, %lo(trap_block), %g7
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 96033e2..74239dd 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -11,6 +11,7 @@
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_IRQ_SHOW
+	select HAVE_SYSCALL_WRAPPERS if TILEGX
 	select SYS_HYPERVISOR
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index 5d5a635..32e6cbe 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -47,8 +47,8 @@
  */
 #define PCI_DMA_BUS_IS_PHYS     1
 
-int __devinit tile_pci_init(void);
-int __devinit pcibios_init(void);
+int __init tile_pci_init(void);
+int __init pcibios_init(void);
 
 static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
 
diff --git a/arch/tile/include/asm/thread_info.h b/arch/tile/include/asm/thread_info.h
index bc4f562..7594764 100644
--- a/arch/tile/include/asm/thread_info.h
+++ b/arch/tile/include/asm/thread_info.h
@@ -100,9 +100,14 @@
 
 #else /* __ASSEMBLY__ */
 
-/* how to get the thread information struct from ASM */
+/*
+ * How to get the thread information struct from assembly.
+ * Note that we use different macros since different architectures
+ * have different semantics in their "mm" instruction and we would
+ * like to guarantee that the macro expands to exactly one instruction.
+ */
 #ifdef __tilegx__
-#define GET_THREAD_INFO(reg) move reg, sp; mm reg, zero, LOG2_THREAD_SIZE, 63
+#define EXTRACT_THREAD_INFO(reg) mm reg, zero, LOG2_THREAD_SIZE, 63
 #else
 #define GET_THREAD_INFO(reg) mm reg, sp, zero, LOG2_THREAD_SIZE, 31
 #endif
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index 77763cc..cdef6e5 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -403,19 +403,17 @@
 	 * Set up registers for signal handler.
 	 * Registers that we don't modify keep the value they had from
 	 * user-space at the time we took the signal.
+	 * We always pass siginfo and mcontext, regardless of SA_SIGINFO,
+	 * since some things rely on this (e.g. glibc's debug/segfault.c).
 	 */
 	regs->pc = ptr_to_compat_reg(ka->sa.sa_handler);
 	regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
 	regs->sp = ptr_to_compat_reg(frame);
 	regs->lr = restorer;
 	regs->regs[0] = (unsigned long) usig;
-
-	if (ka->sa.sa_flags & SA_SIGINFO) {
-		/* Need extra arguments, so mark to restore caller-saves. */
-		regs->regs[1] = ptr_to_compat_reg(&frame->info);
-		regs->regs[2] = ptr_to_compat_reg(&frame->uc);
-		regs->flags |= PT_FLAGS_CALLER_SAVES;
-	}
+	regs->regs[1] = ptr_to_compat_reg(&frame->info);
+	regs->regs[2] = ptr_to_compat_reg(&frame->uc);
+	regs->flags |= PT_FLAGS_CALLER_SAVES;
 
 	/*
 	 * Notify any tracer that was single-stepping it.
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index 5d56a1e..6943515 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -839,6 +839,18 @@
 	FEEDBACK_REENTER(interrupt_return)
 
 	/*
+	 * Use r33 to hold whether we have already loaded the callee-saves
+	 * into ptregs.  We don't want to do it twice in this loop, since
+	 * then we'd clobber whatever changes are made by ptrace, etc.
+	 * Get base of stack in r32.
+	 */
+	{
+	 GET_THREAD_INFO(r32)
+	 movei  r33, 0
+	}
+
+.Lretry_work_pending:
+	/*
 	 * Disable interrupts so as to make sure we don't
 	 * miss an interrupt that sets any of the thread flags (like
 	 * need_resched or sigpending) between sampling and the iret.
@@ -848,9 +860,6 @@
 	IRQ_DISABLE(r20, r21)
 	TRACE_IRQS_OFF  /* Note: clobbers registers r0-r29 */
 
-	/* Get base of stack in r32; note r30/31 are used as arguments here. */
-	GET_THREAD_INFO(r32)
-
 
 	/* Check to see if there is any work to do before returning to user. */
 	{
@@ -866,16 +875,18 @@
 
 	/*
 	 * Make sure we have all the registers saved for signal
-	 * handling or single-step.  Call out to C code to figure out
-	 * exactly what we need to do for each flag bit, then if
-	 * necessary, reload the flags and recheck.
+	 * handling, notify-resume, or single-step.  Call out to C
+	 * code to figure out exactly what we need to do for each flag bit,
+	 * then if necessary, reload the flags and recheck.
 	 */
-	push_extra_callee_saves r0
 	{
 	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
-	 jal    do_work_pending
+	 bnz    r33, 1f
 	}
-	bnz     r0, .Lresume_userspace
+	push_extra_callee_saves r0
+	movei   r33, 1
+1:	jal     do_work_pending
+	bnz     r0, .Lretry_work_pending
 
 	/*
 	 * In the NMI case we
@@ -1180,10 +1191,12 @@
 	add     r20, r20, tp
 	lw      r21, r20
 	addi    r21, r21, 1
-	sw      r20, r21
+	{
+	 sw     r20, r21
+	 GET_THREAD_INFO(r31)
+	}
 
 	/* Trace syscalls, if requested. */
-	GET_THREAD_INFO(r31)
 	addi	r31, r31, THREAD_INFO_FLAGS_OFFSET
 	lw	r30, r31
 	andi    r30, r30, _TIF_SYSCALL_TRACE
@@ -1362,7 +1375,10 @@
 3:
 	/* set PC and continue */
 	lw      r26, r24
-	sw      r28, r26
+	{
+	 sw     r28, r26
+	 GET_THREAD_INFO(r0)
+	}
 
 	/*
 	 * Clear TIF_SINGLESTEP to prevent recursion if we execute an ill.
@@ -1370,7 +1386,6 @@
 	 * need to clear it here and can't really impose on all other arches.
 	 * So what's another write between friends?
 	 */
-	GET_THREAD_INFO(r0)
 
 	addi    r1, r0, THREAD_INFO_FLAGS_OFFSET
 	{
diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S
index 49d9d66..30ae76e 100644
--- a/arch/tile/kernel/intvec_64.S
+++ b/arch/tile/kernel/intvec_64.S
@@ -647,6 +647,20 @@
 	FEEDBACK_REENTER(interrupt_return)
 
 	/*
+	 * Use r33 to hold whether we have already loaded the callee-saves
+	 * into ptregs.  We don't want to do it twice in this loop, since
+	 * then we'd clobber whatever changes are made by ptrace, etc.
+	 */
+	{
+	 movei  r33, 0
+	 move   r32, sp
+	}
+
+	/* Get base of stack in r32. */
+	EXTRACT_THREAD_INFO(r32)
+
+.Lretry_work_pending:
+	/*
 	 * Disable interrupts so as to make sure we don't
 	 * miss an interrupt that sets any of the thread flags (like
 	 * need_resched or sigpending) between sampling and the iret.
@@ -656,9 +670,6 @@
 	IRQ_DISABLE(r20, r21)
 	TRACE_IRQS_OFF  /* Note: clobbers registers r0-r29 */
 
-	/* Get base of stack in r32; note r30/31 are used as arguments here. */
-	GET_THREAD_INFO(r32)
-
 
 	/* Check to see if there is any work to do before returning to user. */
 	{
@@ -674,16 +685,18 @@
 
 	/*
 	 * Make sure we have all the registers saved for signal
-	 * handling or single-step.  Call out to C code to figure out
+	 * handling or notify-resume.  Call out to C code to figure out
 	 * exactly what we need to do for each flag bit, then if
 	 * necessary, reload the flags and recheck.
 	 */
-	push_extra_callee_saves r0
 	{
 	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
-	 jal    do_work_pending
+	 bnez   r33, 1f
 	}
-	bnez    r0, .Lresume_userspace
+	push_extra_callee_saves r0
+	movei   r33, 1
+1:	jal     do_work_pending
+	bnez    r0, .Lretry_work_pending
 
 	/*
 	 * In the NMI case we
@@ -968,11 +981,16 @@
 	shl16insli r20, r20, hw0(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET)
 	add     r20, r20, tp
 	ld4s    r21, r20
-	addi    r21, r21, 1
-	st4     r20, r21
+	{
+	 addi   r21, r21, 1
+	 move   r31, sp
+	}
+	{
+	 st4    r20, r21
+	 EXTRACT_THREAD_INFO(r31)
+	}
 
 	/* Trace syscalls, if requested. */
-	GET_THREAD_INFO(r31)
 	addi	r31, r31, THREAD_INFO_FLAGS_OFFSET
 	ld	r30, r31
 	andi    r30, r30, _TIF_SYSCALL_TRACE
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index a1bb59e..b56d12b 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -141,7 +141,7 @@
  *
  * Returns the number of controllers discovered.
  */
-int __devinit tile_pci_init(void)
+int __init tile_pci_init(void)
 {
 	int i;
 
@@ -287,7 +287,7 @@
  * The controllers have been set up by the time we get here, by a call to
  * tile_pci_init.
  */
-int __devinit pcibios_init(void)
+int __init pcibios_init(void)
 {
 	int i;
 
diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c
index 7a93270..446a7f5 100644
--- a/arch/tile/kernel/proc.c
+++ b/arch/tile/kernel/proc.c
@@ -146,7 +146,6 @@
 	},
 	{}
 };
-#endif
 
 static struct ctl_path tile_path[] = {
 	{ .procname = "tile" },
@@ -155,10 +154,9 @@
 
 static int __init proc_sys_tile_init(void)
 {
-#ifndef __tilegx__  /* FIXME: GX: no support for unaligned access yet */
 	register_sysctl_paths(tile_path, unaligned_table);
-#endif
 	return 0;
 }
 
 arch_initcall(proc_sys_tile_init);
+#endif
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 2d5ef61..54e6c64 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -567,6 +567,10 @@
  */
 int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
 {
+	/* If we enter in kernel mode, do nothing and exit the caller loop. */
+	if (!user_mode(regs))
+		return 0;
+
 	if (thread_info_flags & _TIF_NEED_RESCHED) {
 		schedule();
 		return 1;
@@ -589,8 +593,7 @@
 		return 1;
 	}
 	if (thread_info_flags & _TIF_SINGLESTEP) {
-		if ((regs->ex1 & SPR_EX_CONTEXT_1_1__PL_MASK) == 0)
-			single_step_once(regs);
+		single_step_once(regs);
 		return 0;
 	}
 	panic("work_pending: bad flags %#x\n", thread_info_flags);
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 9efbc13..89529c9 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -346,12 +346,10 @@
 		}
 
 		/* allocate a cache line of writable, executable memory */
-		down_write(&current->mm->mmap_sem);
-		buffer = (void __user *) do_mmap(NULL, 0, 64,
+		buffer = (void __user *) vm_mmap(NULL, 0, 64,
 					  PROT_EXEC | PROT_READ | PROT_WRITE,
 					  MAP_PRIVATE | MAP_ANONYMOUS,
 					  0);
-		up_write(&current->mm->mmap_sem);
 
 		if (IS_ERR((void __force *)buffer)) {
 			kfree(state);
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
index b949edc..172aef7 100644
--- a/arch/tile/kernel/smpboot.c
+++ b/arch/tile/kernel/smpboot.c
@@ -196,6 +196,8 @@
 	/* This must be done before setting cpu_online_mask */
 	wmb();
 
+	notify_cpu_starting(smp_processor_id());
+
 	/*
 	 * We need to hold call_lock, so there is no inconsistency
 	 * between the time smp_call_function() determines number of
diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h
index dc36b22..6673508 100644
--- a/arch/um/drivers/cow.h
+++ b/arch/um/drivers/cow.h
@@ -3,41 +3,6 @@
 
 #include <asm/types.h>
 
-#if defined(__KERNEL__)
-
-# include <asm/byteorder.h>
-
-# if defined(__BIG_ENDIAN)
-#	define ntohll(x) (x)
-#	define htonll(x) (x)
-# elif defined(__LITTLE_ENDIAN)
-#	define ntohll(x)  be64_to_cpu(x)
-#	define htonll(x)  cpu_to_be64(x)
-# else
-#	error "Could not determine byte order"
-# endif
-
-#else
-/* For the definition of ntohl, htonl and __BYTE_ORDER */
-#include <endian.h>
-#include <netinet/in.h>
-#if defined(__BYTE_ORDER)
-
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#	define ntohll(x) (x)
-#	define htonll(x) (x)
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#	define ntohll(x)  bswap_64(x)
-#	define htonll(x)  bswap_64(x)
-#  else
-#	error "Could not determine byte order: __BYTE_ORDER uncorrectly defined"
-#  endif
-
-#else  /* ! defined(__BYTE_ORDER) */
-#	error "Could not determine byte order: __BYTE_ORDER not defined"
-#endif
-#endif /* ! defined(__KERNEL__) */
-
 extern int init_cow_file(int fd, char *cow_file, char *backing_file,
 			 int sectorsize, int alignment, int *bitmap_offset_out,
 			 unsigned long *bitmap_len_out, int *data_offset_out);
diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c
index 9cbb426..0ee9cc6 100644
--- a/arch/um/drivers/cow_user.c
+++ b/arch/um/drivers/cow_user.c
@@ -8,11 +8,10 @@
  * that.
  */
 #include <unistd.h>
-#include <byteswap.h>
 #include <errno.h>
 #include <string.h>
 #include <arpa/inet.h>
-#include <asm/types.h>
+#include <endian.h>
 #include "cow.h"
 #include "cow_sys.h"
 
@@ -214,8 +213,8 @@
 			   "header\n");
 		goto out;
 	}
-	header->magic = htonl(COW_MAGIC);
-	header->version = htonl(COW_VERSION);
+	header->magic = htobe32(COW_MAGIC);
+	header->version = htobe32(COW_VERSION);
 
 	err = -EINVAL;
 	if (strlen(backing_file) > sizeof(header->backing_file) - 1) {
@@ -246,10 +245,10 @@
 		goto out_free;
 	}
 
-	header->mtime = htonl(modtime);
-	header->size = htonll(*size);
-	header->sectorsize = htonl(sectorsize);
-	header->alignment = htonl(alignment);
+	header->mtime = htobe32(modtime);
+	header->size = htobe64(*size);
+	header->sectorsize = htobe32(sectorsize);
+	header->alignment = htobe32(alignment);
 	header->cow_format = COW_BITMAP;
 
 	err = cow_write_file(fd, header, sizeof(*header));
@@ -301,8 +300,8 @@
 	magic = header->v1.magic;
 	if (magic == COW_MAGIC)
 		version = header->v1.version;
-	else if (magic == ntohl(COW_MAGIC))
-		version = ntohl(header->v1.version);
+	else if (magic == be32toh(COW_MAGIC))
+		version = be32toh(header->v1.version);
 	/* No error printed because the non-COW case comes through here */
 	else goto out;
 
@@ -327,9 +326,9 @@
 				   "header\n");
 			goto out;
 		}
-		*mtime_out = ntohl(header->v2.mtime);
-		*size_out = ntohll(header->v2.size);
-		*sectorsize_out = ntohl(header->v2.sectorsize);
+		*mtime_out = be32toh(header->v2.mtime);
+		*size_out = be64toh(header->v2.size);
+		*sectorsize_out = be32toh(header->v2.sectorsize);
 		*bitmap_offset_out = sizeof(header->v2);
 		*align_out = *sectorsize_out;
 		file = header->v2.backing_file;
@@ -341,10 +340,10 @@
 				   "header\n");
 			goto out;
 		}
-		*mtime_out = ntohl(header->v3.mtime);
-		*size_out = ntohll(header->v3.size);
-		*sectorsize_out = ntohl(header->v3.sectorsize);
-		*align_out = ntohl(header->v3.alignment);
+		*mtime_out = be32toh(header->v3.mtime);
+		*size_out = be64toh(header->v3.size);
+		*sectorsize_out = be32toh(header->v3.sectorsize);
+		*align_out = be32toh(header->v3.alignment);
 		if (*align_out == 0) {
 			cow_printf("read_cow_header - invalid COW header, "
 				   "align == 0\n");
@@ -366,16 +365,16 @@
 		 * this was used until Dec2005 - 64bits are needed to represent
 		 * 2038+. I.e. we can safely do this truncating cast.
 		 *
-		 * Additionally, we must use ntohl() instead of ntohll(), since
+		 * Additionally, we must use be32toh() instead of be64toh(), since
 		 * the program used to use the former (tested - I got mtime
 		 * mismatch "0 vs whatever").
 		 *
 		 * Ever heard about bug-to-bug-compatibility ? ;-) */
-		*mtime_out = (time32_t) ntohl(header->v3_b.mtime);
+		*mtime_out = (time32_t) be32toh(header->v3_b.mtime);
 
-		*size_out = ntohll(header->v3_b.size);
-		*sectorsize_out = ntohl(header->v3_b.sectorsize);
-		*align_out = ntohl(header->v3_b.alignment);
+		*size_out = be64toh(header->v3_b.size);
+		*sectorsize_out = be32toh(header->v3_b.sectorsize);
+		*align_out = be32toh(header->v3_b.alignment);
 		if (*align_out == 0) {
 			cow_printf("read_cow_header - invalid COW header, "
 				   "align == 0\n");
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index e672bd6..43b39d6 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -22,6 +22,7 @@
 #include <linux/workqueue.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
+#include <asm/switch_to.h>
 
 #include "init.h"
 #include "irq_kern.h"
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
index 8419f5c..fff2435 100644
--- a/arch/um/include/asm/Kbuild
+++ b/arch/um/include/asm/Kbuild
@@ -1,3 +1,4 @@
 generic-y += bug.h cputime.h device.h emergency-restart.h futex.h hardirq.h
 generic-y += hw_irq.h irq_regs.h kdebug.h percpu.h sections.h topology.h xor.h
-generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h
+generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h exec.h
+generic-y += switch_to.h
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index 492bc4c..65a1c3d 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -3,9 +3,10 @@
 # Licensed under the GPL
 #
 
-CPPFLAGS_vmlinux.lds := -DSTART=$(LDS_START) \
-                        -DELF_ARCH=$(LDS_ELF_ARCH)        \
-                        -DELF_FORMAT=$(LDS_ELF_FORMAT)
+CPPFLAGS_vmlinux.lds := -DSTART=$(LDS_START)		\
+                        -DELF_ARCH=$(LDS_ELF_ARCH)	\
+                        -DELF_FORMAT=$(LDS_ELF_FORMAT)	\
+			$(LDS_EXTRA)
 extra-y := vmlinux.lds
 clean-files :=
 
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index f386d04..2b73ded 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -88,11 +88,8 @@
 
 extern void arch_switch_to(struct task_struct *to);
 
-void *_switch_to(void *prev, void *next, void *last)
+void *__switch_to(struct task_struct *from, struct task_struct *to)
 {
-	struct task_struct *from = prev;
-	struct task_struct *to = next;
-
 	to->thread.prev_sched = from;
 	set_current(to);
 
@@ -111,7 +108,6 @@
 	} while (current->thread.saved_task);
 
 	return current->thread.prev_sched;
-
 }
 
 void interrupt_end(void)
diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index 4947b31..0a49ef0 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -103,7 +103,6 @@
 
 void uml_setup_stubs(struct mm_struct *mm)
 {
-	struct page **pages;
 	int err, ret;
 
 	if (!skas_needs_stub)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1d14cc6..c9866b0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -81,7 +81,7 @@
 	select CLKEVT_I8253
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_IOMAP
-	select DCACHE_WORD_ACCESS if !DEBUG_PAGEALLOC
+	select DCACHE_WORD_ACCESS
 
 config INSTRUCTION_DECODER
 	def_bool (KPROBES || PERF_EVENTS)
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 41a7237..94e91e4 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -134,6 +134,9 @@
 KBUILD_CFLAGS += $(mflags-y)
 KBUILD_AFLAGS += $(mflags-y)
 
+archscripts:
+	$(Q)$(MAKE) $(build)=arch/x86/tools relocs
+
 ###
 # Syscall table generation
 
diff --git a/arch/x86/Makefile.um b/arch/x86/Makefile.um
index 4be406a..36b62bc 100644
--- a/arch/x86/Makefile.um
+++ b/arch/x86/Makefile.um
@@ -14,6 +14,9 @@
 
 export LDFLAGS
 
+LDS_EXTRA		:= -Ui386
+export LDS_EXTRA
+
 # First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
 include $(srctree)/arch/x86/Makefile_32.cpu
 
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index fd55a2f..e398bb5 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -40,13 +40,12 @@
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
+targets += vmlinux.bin.all vmlinux.relocs
 
-targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs
-
+CMD_RELOCS = arch/x86/tools/relocs
 quiet_cmd_relocs = RELOCS  $@
-      cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
-$(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
+      cmd_relocs = $(CMD_RELOCS) $< > $@;$(CMD_RELOCS) --abs-relocs $<
+$(obj)/vmlinux.relocs: vmlinux FORCE
 	$(call if_changed,relocs)
 
 vmlinux.bin.all-y := $(obj)/vmlinux.bin
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index a055993..c85e3ac 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -33,6 +33,9 @@
 	__HEAD
 ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB
+	jmp	preferred_addr
+
+	.balign	0x10
 	/*
 	 * We don't need the return address, so set up the stack so
 	 * efi_main() can find its arugments.
@@ -41,12 +44,17 @@
 
 	call	efi_main
 	cmpl	$0, %eax
-	je	preferred_addr
 	movl	%eax, %esi
-	call	1f
+	jne	2f
 1:
+	/* EFI init failed, so hang. */
+	hlt
+	jmp	1b
+2:
+	call	3f
+3:
 	popl	%eax
-	subl	$1b, %eax
+	subl	$3b, %eax
 	subl	BP_pref_address(%esi), %eax
 	add	BP_code32_start(%esi), %eax
 	leal	preferred_addr(%eax), %eax
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 558d76c..87e03a1 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -200,18 +200,28 @@
 	 * entire text+data+bss and hopefully all of memory.
 	 */
 #ifdef CONFIG_EFI_STUB
-	pushq	%rsi
+	/*
+	 * The entry point for the PE/COFF executable is 0x210, so only
+	 * legacy boot loaders will execute this jmp.
+	 */
+	jmp	preferred_addr
+
+	.org 0x210
 	mov	%rcx, %rdi
 	mov	%rdx, %rsi
 	call	efi_main
-	popq	%rsi
-	cmpq	$0,%rax
-	je	preferred_addr
 	movq	%rax,%rsi
-	call	1f
+	cmpq	$0,%rax
+	jne	2f
 1:
+	/* EFI init failed, so hang. */
+	hlt
+	jmp	1b
+2:
+	call	3f
+3:
 	popq	%rax
-	subq	$1b, %rax
+	subq	$3b, %rax
 	subq	BP_pref_address(%rsi), %rax
 	add	BP_code32_start(%esi), %eax
 	leaq	preferred_addr(%rax), %rax
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index ed54976..24443a3 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -205,8 +205,13 @@
 	put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
 
 #ifdef CONFIG_X86_32
-	/* Address of entry point */
-	put_unaligned_le32(i, &buf[pe_header + 0x28]);
+	/*
+	 * Address of entry point.
+	 *
+	 * The EFI stub entry point is +16 bytes from the start of
+	 * the .text section.
+	 */
+	put_unaligned_le32(i + 16, &buf[pe_header + 0x28]);
 
 	/* .text size */
 	put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]);
@@ -217,9 +222,11 @@
 	/*
 	 * Address of entry point. startup_32 is at the beginning and
 	 * the 64-bit entry point (startup_64) is always 512 bytes
-	 * after.
+	 * after. The EFI stub entry point is 16 bytes after that, as
+	 * the first instruction allows legacy loaders to jump over
+	 * the EFI stub initialisation
 	 */
-	put_unaligned_le32(i + 512, &buf[pe_header + 0x28]);
+	put_unaligned_le32(i + 528, &buf[pe_header + 0x28]);
 
 	/* .text size */
 	put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]);
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index d511d95..07b3a68 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -119,9 +119,7 @@
 	end = PAGE_ALIGN(end);
 	if (end <= start)
 		return;
-	down_write(&current->mm->mmap_sem);
-	do_brk(start, end - start);
-	up_write(&current->mm->mmap_sem);
+	vm_brk(start, end - start);
 }
 
 #ifdef CORE_DUMP
@@ -296,8 +294,7 @@
 
 	/* OK, This is the point of no return */
 	set_personality(PER_LINUX);
-	set_thread_flag(TIF_IA32);
-	current->mm->context.ia32_compat = 1;
+	set_personality_ia32(false);
 
 	setup_new_exec(bprm);
 
@@ -332,9 +329,7 @@
 		pos = 32;
 		map_size = ex.a_text+ex.a_data;
 
-		down_write(&current->mm->mmap_sem);
-		error = do_brk(text_addr & PAGE_MASK, map_size);
-		up_write(&current->mm->mmap_sem);
+		error = vm_brk(text_addr & PAGE_MASK, map_size);
 
 		if (error != (text_addr & PAGE_MASK)) {
 			send_sig(SIGKILL, current, 0);
@@ -373,9 +368,7 @@
 		if (!bprm->file->f_op->mmap || (fd_offset & ~PAGE_MASK) != 0) {
 			loff_t pos = fd_offset;
 
-			down_write(&current->mm->mmap_sem);
-			do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
-			up_write(&current->mm->mmap_sem);
+			vm_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
 			bprm->file->f_op->read(bprm->file,
 					(char __user *)N_TXTADDR(ex),
 					ex.a_text+ex.a_data, &pos);
@@ -385,26 +378,22 @@
 			goto beyond_if;
 		}
 
-		down_write(&current->mm->mmap_sem);
-		error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
+		error = vm_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
 				PROT_READ | PROT_EXEC,
 				MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE |
 				MAP_EXECUTABLE | MAP_32BIT,
 				fd_offset);
-		up_write(&current->mm->mmap_sem);
 
 		if (error != N_TXTADDR(ex)) {
 			send_sig(SIGKILL, current, 0);
 			return error;
 		}
 
-		down_write(&current->mm->mmap_sem);
-		error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
+		error = vm_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
 				PROT_READ | PROT_WRITE | PROT_EXEC,
 				MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE |
 				MAP_EXECUTABLE | MAP_32BIT,
 				fd_offset + ex.a_text);
-		up_write(&current->mm->mmap_sem);
 		if (error != N_DATADDR(ex)) {
 			send_sig(SIGKILL, current, 0);
 			return error;
@@ -476,9 +465,7 @@
 			error_time = jiffies;
 		}
 #endif
-		down_write(&current->mm->mmap_sem);
-		do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss);
-		up_write(&current->mm->mmap_sem);
+		vm_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss);
 
 		file->f_op->read(file, (char __user *)start_addr,
 			ex.a_text + ex.a_data, &pos);
@@ -490,12 +477,10 @@
 		goto out;
 	}
 	/* Now use mmap to map the library into memory. */
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap(file, start_addr, ex.a_text + ex.a_data,
+	error = vm_mmap(file, start_addr, ex.a_text + ex.a_data,
 			PROT_READ | PROT_WRITE | PROT_EXEC,
 			MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_32BIT,
 			N_TXTOFF(ex));
-	up_write(&current->mm->mmap_sem);
 	retval = error;
 	if (error != start_addr)
 		goto out;
@@ -503,9 +488,7 @@
 	len = PAGE_ALIGN(ex.a_text + ex.a_data);
 	bss = ex.a_text + ex.a_data + ex.a_bss;
 	if (bss > len) {
-		down_write(&current->mm->mmap_sem);
-		error = do_brk(start_addr + len, bss - len);
-		up_write(&current->mm->mmap_sem);
+		error = vm_brk(start_addr + len, bss - len);
 		retval = error;
 		if (error != start_addr + len)
 			goto out;
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index b3b7332..99480e5 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -43,7 +43,7 @@
 		switch (sizeof(*(ptr))) {				\
 		case __X86_CASE_B:					\
 			asm volatile (lock #op "b %b0, %1\n"		\
-				      : "+r" (__ret), "+m" (*(ptr))	\
+				      : "+q" (__ret), "+m" (*(ptr))	\
 				      : : "memory", "cc");		\
 			break;						\
 		case __X86_CASE_W:					\
@@ -173,7 +173,7 @@
 		switch (sizeof(*(ptr))) {				\
 		case __X86_CASE_B:					\
 			asm volatile (lock "addb %b1, %0\n"		\
-				      : "+m" (*(ptr)) : "ri" (inc)	\
+				      : "+m" (*(ptr)) : "qi" (inc)	\
 				      : "memory", "cc");		\
 			break;						\
 		case __X86_CASE_W:					\
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index 734c376..183922e 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -170,6 +170,9 @@
 	unsigned int eax, ebx, ecx, edx;
 	char signature[13];
 
+	if (boot_cpu_data.cpuid_level < 0)
+		return 0;	/* So we don't blow up on old processors */
+
 	cpuid(KVM_CPUID_SIGNATURE, &eax, &ebx, &ecx, &edx);
 	memcpy(signature + 0, &ebx, 4);
 	memcpy(signature + 4, &ecx, 4);
diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h
index 3427b77..7ef7c30 100644
--- a/arch/x86/include/asm/posix_types.h
+++ b/arch/x86/include/asm/posix_types.h
@@ -7,9 +7,9 @@
 #else
 # ifdef __i386__
 #  include "posix_types_32.h"
-# elif defined(__LP64__)
-#  include "posix_types_64.h"
-# else
+# elif defined(__ILP32__)
 #  include "posix_types_x32.h"
+# else
+#  include "posix_types_64.h"
 # endif
 #endif
diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h
index 4a08538..5ca71c0 100644
--- a/arch/x86/include/asm/sigcontext.h
+++ b/arch/x86/include/asm/sigcontext.h
@@ -257,7 +257,7 @@
 	__u64 oldmask;
 	__u64 cr2;
 	struct _fpstate __user *fpstate;	/* zero when no FPU context */
-#ifndef __LP64__
+#ifdef __ILP32__
 	__u32 __fpstate_pad;
 #endif
 	__u64 reserved1[8];
diff --git a/arch/x86/include/asm/siginfo.h b/arch/x86/include/asm/siginfo.h
index fc1aa55..34c47b3 100644
--- a/arch/x86/include/asm/siginfo.h
+++ b/arch/x86/include/asm/siginfo.h
@@ -2,7 +2,13 @@
 #define _ASM_X86_SIGINFO_H
 
 #ifdef __x86_64__
-# define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+# ifdef __ILP32__ /* x32 */
+typedef long long __kernel_si_clock_t __attribute__((aligned(4)));
+#  define __ARCH_SI_CLOCK_T		__kernel_si_clock_t
+#  define __ARCH_SI_ATTRIBUTES		__attribute__((aligned(8)))
+# else /* x86-64 */
+#  define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+# endif
 #endif
 
 #include <asm-generic/siginfo.h>
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 8be5f54..e054459 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -557,6 +557,8 @@
 
 extern unsigned long
 copy_from_user_nmi(void *to, const void __user *from, unsigned long n);
+extern __must_check long
+strncpy_from_user(char *dst, const char __user *src, long count);
 
 /*
  * movsl can be slow when source and dest are not both 8-byte aligned
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 566e803..8084bc7 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -213,11 +213,6 @@
 	return n;
 }
 
-long __must_check strncpy_from_user(char *dst, const char __user *src,
-				    long count);
-long __must_check __strncpy_from_user(char *dst,
-				      const char __user *src, long count);
-
 /**
  * strlen_user: - Get the size of a string in user space.
  * @str: The string to measure.
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 1c66d30..fcd4b6f 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -208,10 +208,6 @@
 	}
 }
 
-__must_check long
-strncpy_from_user(char *dst, const char __user *src, long count);
-__must_check long
-__strncpy_from_user(char *dst, const char __user *src, long count);
 __must_check long strnlen_user(const char __user *str, long n);
 __must_check long __strnlen_user(const char __user *str, long n);
 __must_check long strlen_user(const char __user *str);
diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h
index 37cdc9d..4437001 100644
--- a/arch/x86/include/asm/unistd.h
+++ b/arch/x86/include/asm/unistd.h
@@ -63,10 +63,10 @@
 #else
 # ifdef __i386__
 #  include <asm/unistd_32.h>
-# elif defined(__LP64__)
-#  include <asm/unistd_64.h>
-# else
+# elif defined(__ILP32__)
 #  include <asm/unistd_x32.h>
+# else
+#  include <asm/unistd_64.h>
 # endif
 #endif
 
diff --git a/arch/x86/include/asm/word-at-a-time.h b/arch/x86/include/asm/word-at-a-time.h
index 6fe6767..e58f03b 100644
--- a/arch/x86/include/asm/word-at-a-time.h
+++ b/arch/x86/include/asm/word-at-a-time.h
@@ -43,4 +43,37 @@
 	return ((a - REPEAT_BYTE(0x01)) & ~a) & REPEAT_BYTE(0x80);
 }
 
+/*
+ * Load an unaligned word from kernel space.
+ *
+ * In the (very unlikely) case of the word being a page-crosser
+ * and the next page not being mapped, take the exception and
+ * return zeroes in the non-existing part.
+ */
+static inline unsigned long load_unaligned_zeropad(const void *addr)
+{
+	unsigned long ret, dummy;
+
+	asm(
+		"1:\tmov %2,%0\n"
+		"2:\n"
+		".section .fixup,\"ax\"\n"
+		"3:\t"
+		"lea %2,%1\n\t"
+		"and %3,%1\n\t"
+		"mov (%1),%0\n\t"
+		"leal %2,%%ecx\n\t"
+		"andl %4,%%ecx\n\t"
+		"shll $3,%%ecx\n\t"
+		"shr %%cl,%0\n\t"
+		"jmp 2b\n"
+		".previous\n"
+		_ASM_EXTABLE(1b, 3b)
+		:"=&r" (ret),"=&c" (dummy)
+		:"m" (*(unsigned long *)addr),
+		 "i" (-sizeof(unsigned long)),
+		 "i" (sizeof(unsigned long)-1));
+	return ret;
+}
+
 #endif /* _ASM_WORD_AT_A_TIME_H */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index baaca8d..764b66a 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -195,6 +195,5 @@
 
 extern void x86_init_noop(void);
 extern void x86_init_uint_noop(unsigned int unused);
-extern void x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node);
 
 #endif
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index a415b1f..7c439fe 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -593,7 +593,7 @@
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 #include <acpi/processor.h>
 
-static void __cpuinitdata acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+static void __cpuinit acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	int nid;
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 103b6ab..146a49c 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -24,6 +24,10 @@
 static char temp_stack[4096];
 #endif
 
+asmlinkage void acpi_enter_s3(void)
+{
+	acpi_enter_sleep_state(3, wake_sleep_flags);
+}
 /**
  * acpi_suspend_lowlevel - save kernel state
  *
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
index 416d4be..d68677a 100644
--- a/arch/x86/kernel/acpi/sleep.h
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -3,12 +3,16 @@
  */
 
 #include <asm/trampoline.h>
+#include <linux/linkage.h>
 
 extern unsigned long saved_video_mode;
 extern long saved_magic;
 
 extern int wakeup_pmode_return;
 
+extern u8 wake_sleep_flags;
+extern asmlinkage void acpi_enter_s3(void);
+
 extern unsigned long acpi_copy_wakeup_routine(unsigned long);
 extern void wakeup_long64(void);
 
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index 13ab720..7261083 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -74,9 +74,7 @@
 ENTRY(do_suspend_lowlevel)
 	call	save_processor_state
 	call	save_registers
-	pushl	$3
-	call	acpi_enter_sleep_state
-	addl	$4, %esp
+	call	acpi_enter_s3
 
 #	In case of S3 failure, we'll emerge here.  Jump
 # 	to ret_point to recover
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 8ea5164..014d1d2 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -71,9 +71,7 @@
 	movq	%rsi, saved_rsi
 
 	addq	$8, %rsp
-	movl	$3, %edi
-	xorl	%eax, %eax
-	call	acpi_enter_sleep_state
+	call	acpi_enter_s3
 	/* in case something went wrong, restore the machine status and go on */
 	jmp	resume_point
 
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 11544d8..edc2448 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1637,9 +1637,11 @@
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 
 	/* The BIOS may have set up the APIC at some other address */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (l & MSR_IA32_APICBASE_ENABLE)
-		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (l & MSR_IA32_APICBASE_ENABLE)
+			mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	}
 
 	pr_info("Found and enabled local APIC!\n");
 	return 0;
@@ -1657,13 +1659,15 @@
 	 * MSR. This can only be done in software for Intel P6 or later
 	 * and AMD K7 (Model > 1) or later.
 	 */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (!(l & MSR_IA32_APICBASE_ENABLE)) {
-		pr_info("Local APIC disabled by BIOS -- reenabling.\n");
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
-		enabled_via_apicbase = 1;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+			pr_info("Local APIC disabled by BIOS -- reenabling.\n");
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+			enabled_via_apicbase = 1;
+		}
 	}
 	return apic_verify();
 }
@@ -2209,10 +2213,12 @@
 		 * FIXME! This will be wrong if we ever support suspend on
 		 * SMP! We'll need to do this as part of the CPU restore!
 		 */
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
+		if (boot_cpu_data.x86 >= 6) {
+			rdmsr(MSR_IA32_APICBASE, l, h);
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+		}
 	}
 
 	maxlvt = lapic_get_maxlvt();
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
index 899803e..23e7542 100644
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -207,8 +207,11 @@
 
 static void fixup_cpu_id(struct cpuinfo_x86 *c, int node)
 {
-	c->phys_proc_id = node;
-	per_cpu(cpu_llc_id, smp_processor_id()) = node;
+
+	if (c->phys_proc_id != node) {
+		c->phys_proc_id = node;
+		per_cpu(cpu_llc_id, smp_processor_id()) = node;
+	}
 }
 
 static int __init numachip_system_init(void)
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 8a778db..991e315 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -24,6 +24,12 @@
 {
 	if (x2apic_phys)
 		return x2apic_enabled();
+	else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
+		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) &&
+		x2apic_enabled()) {
+		printk(KERN_DEBUG "System requires x2apic physical mode\n");
+		return 1;
+	}
 	else
 		return 0;
 }
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 0a44b90..146bb62 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -26,7 +26,8 @@
  *	contact AMD for precise details and a CPU swap.
  *
  *	See	http://www.multimania.com/poulot/k6bug.html
- *		http://www.amd.com/K6/k6docs/revgd.html
+ *	and	section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
+ *		(Publication # 21266  Issue Date: August 1998)
  *
  *	The following test is erm.. interesting. AMD neglected to up
  *	the chip setting when fixing the bug but they also tweaked some
@@ -94,7 +95,6 @@
 				"system stability may be impaired when more than 32 MB are used.\n");
 		else
 			printk(KERN_CONT "probably OK (after B9730xxxx).\n");
-		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
 	}
 
 	/* K6 with old style WHCR */
@@ -353,10 +353,11 @@
 		node = per_cpu(cpu_llc_id, cpu);
 
 	/*
-	 * If core numbers are inconsistent, it's likely a multi-fabric platform,
-	 * so invoke platform-specific handler
+	 * On multi-fabric platform (e.g. Numascale NumaChip) a
+	 * platform-specific handler needs to be called to fixup some
+	 * IDs of the CPU.
 	 */
-	if (c->phys_proc_id != node)
+	if (x86_cpuinit.fixup_cpu_id)
 		x86_cpuinit.fixup_cpu_id(c, node);
 
 	if (!node_online(node)) {
@@ -579,6 +580,24 @@
 		}
 	}
 
+	/* re-enable TopologyExtensions if switched off by BIOS */
+	if ((c->x86 == 0x15) &&
+	    (c->x86_model >= 0x10) && (c->x86_model <= 0x1f) &&
+	    !cpu_has(c, X86_FEATURE_TOPOEXT)) {
+		u64 val;
+
+		if (!rdmsrl_amd_safe(0xc0011005, &val)) {
+			val |= 1ULL << 54;
+			wrmsrl_amd_safe(0xc0011005, val);
+			rdmsrl(0xc0011005, val);
+			if (val & (1ULL << 54)) {
+				set_cpu_cap(c, X86_FEATURE_TOPOEXT);
+				printk(KERN_INFO FW_INFO "CPU: Re-enabling "
+				  "disabled Topology Extensions Support\n");
+			}
+		}
+	}
+
 	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 67e2583..cf79302 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1163,15 +1163,6 @@
 #endif /* ! CONFIG_KGDB */
 
 /*
- * Prints an error where the NUMA and configured core-number mismatch and the
- * platform didn't override this to fix it up
- */
-void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node)
-{
-	pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id);
-}
-
-/*
  * cpu_init() initializes state that is per-CPU. Some data is already
  * initialized (naturally) in the bootstrap process, such as the GDT
  * and IDT. We reload them nevertheless, this function acts as a
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 73d08ed..b8f3653 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -433,14 +433,14 @@
 	/*  check if @slot is already used or the index is already disabled */
 	ret = amd_get_l3_disable_slot(nb, slot);
 	if (ret >= 0)
-		return -EINVAL;
+		return -EEXIST;
 
 	if (index > nb->l3_cache.indices)
 		return -EINVAL;
 
 	/* check whether the other slot has disabled the same index already */
 	if (index == amd_get_l3_disable_slot(nb, !slot))
-		return -EINVAL;
+		return -EEXIST;
 
 	amd_l3_disable_index(nb, cpu, slot, index);
 
@@ -468,8 +468,8 @@
 	err = amd_set_l3_disable_slot(this_leaf->base.nb, cpu, slot, val);
 	if (err) {
 		if (err == -EEXIST)
-			printk(KERN_WARNING "L3 disable slot %d in use!\n",
-					    slot);
+			pr_warning("L3 slot %d in use/index already disabled!\n",
+				   slot);
 		return err;
 	}
 	return count;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index d086a09..11c9166 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -945,9 +945,10 @@
 	atomic_t		inuse;
 	struct task_struct	*t;
 	__u64			paddr;
+	int			restartable;
 } mce_info[MCE_INFO_MAX];
 
-static void mce_save_info(__u64 addr)
+static void mce_save_info(__u64 addr, int c)
 {
 	struct mce_info *mi;
 
@@ -955,6 +956,7 @@
 		if (atomic_cmpxchg(&mi->inuse, 0, 1) == 0) {
 			mi->t = current;
 			mi->paddr = addr;
+			mi->restartable = c;
 			return;
 		}
 	}
@@ -1130,7 +1132,7 @@
 			mce_panic("Fatal machine check on current CPU", &m, msg);
 		if (worst == MCE_AR_SEVERITY) {
 			/* schedule action before return to userland */
-			mce_save_info(m.addr);
+			mce_save_info(m.addr, m.mcgstatus & MCG_STATUS_RIPV);
 			set_thread_flag(TIF_MCE_NOTIFY);
 		} else if (kill_it) {
 			force_sig(SIGBUS, current);
@@ -1179,7 +1181,13 @@
 
 	pr_err("Uncorrected hardware memory error in user-access at %llx",
 		 mi->paddr);
-	if (memory_failure(pfn, MCE_VECTOR, MF_ACTION_REQUIRED) < 0) {
+	/*
+	 * We must call memory_failure() here even if the current process is
+	 * doomed. We still need to mark the page as poisoned and alert any
+	 * other users of the page.
+	 */
+	if (memory_failure(pfn, MCE_VECTOR, MF_ACTION_REQUIRED) < 0 ||
+			   mi->restartable == 0) {
 		pr_err("Memory error not recovered");
 		force_sig(SIGBUS, current);
 	}
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 7734bcb..2d6e649 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -235,6 +235,7 @@
 	if (tsk_used_math(tsk)) {
 		if (HAVE_HWFP && tsk == current)
 			unlazy_fpu(tsk);
+		tsk->thread.fpu.last_cpu = ~0;
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index b8ba6e4..e554e5a 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -79,7 +79,6 @@
 	u32 token;
 	int cpu;
 	bool halted;
-	struct mm_struct *mm;
 };
 
 static struct kvm_task_sleep_head {
@@ -126,9 +125,7 @@
 
 	n.token = token;
 	n.cpu = smp_processor_id();
-	n.mm = current->active_mm;
 	n.halted = idle || preempt_count() > 1;
-	atomic_inc(&n.mm->mm_count);
 	init_waitqueue_head(&n.wq);
 	hlist_add_head(&n.link, &b->list);
 	spin_unlock(&b->lock);
@@ -161,9 +158,6 @@
 static void apf_task_wake_one(struct kvm_task_sleep_node *n)
 {
 	hlist_del_init(&n->link);
-	if (!n->mm)
-		return;
-	mmdrop(n->mm);
 	if (n->halted)
 		smp_send_reschedule(n->cpu);
 	else if (waitqueue_active(&n->wq))
@@ -207,7 +201,7 @@
 		 * async PF was not yet handled.
 		 * Add dummy entry for the token.
 		 */
-		n = kmalloc(sizeof(*n), GFP_ATOMIC);
+		n = kzalloc(sizeof(*n), GFP_ATOMIC);
 		if (!n) {
 			/*
 			 * Allocation failed! Busy wait while other cpu
@@ -219,7 +213,6 @@
 		}
 		n->token = token;
 		n->cpu = smp_processor_id();
-		n->mm = NULL;
 		init_waitqueue_head(&n->wq);
 		hlist_add_head(&n->link, &b->list);
 	} else
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 73465aa..8a2ce8f 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -82,11 +82,6 @@
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
-		pr_warning("CPU%d: family %d not supported\n", cpu, c->x86);
-		return -1;
-	}
-
 	csig->rev = c->microcode;
 	pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev);
 
@@ -380,6 +375,13 @@
 
 struct microcode_ops * __init init_amd_microcode(void)
 {
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+		pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
+		return NULL;
+	}
+
 	patch = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!patch)
 		return NULL;
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 87a0f86..c9bda6d 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -419,10 +419,8 @@
 	if (err)
 		return err;
 
-	if (microcode_init_cpu(cpu) == UCODE_ERROR) {
-		sysfs_remove_group(&dev->kobj, &mc_attr_group);
+	if (microcode_init_cpu(cpu) == UCODE_ERROR)
 		return -EINVAL;
-	}
 
 	return err;
 }
@@ -528,11 +526,11 @@
 		microcode_ops = init_intel_microcode();
 	else if (c->x86_vendor == X86_VENDOR_AMD)
 		microcode_ops = init_amd_microcode();
-
-	if (!microcode_ops) {
+	else
 		pr_err("no support for this CPU vendor\n");
+
+	if (!microcode_ops)
 		return -ENODEV;
-	}
 
 	microcode_pdev = platform_device_register_simple("microcode", -1,
 							 NULL, 0);
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 3ca42d0..0327e2b 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -147,12 +147,6 @@
 
 	memset(csig, 0, sizeof(*csig));
 
-	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
-	    cpu_has(c, X86_FEATURE_IA64)) {
-		pr_err("CPU%d not a capable Intel processor\n", cpu_num);
-		return -1;
-	}
-
 	csig->sig = cpuid_eax(0x00000001);
 
 	if ((c->x86_model >= 5) || (c->x86 > 6)) {
@@ -463,6 +457,14 @@
 
 struct microcode_ops * __init init_intel_microcode(void)
 {
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+	    cpu_has(c, X86_FEATURE_IA64)) {
+		pr_err("Intel CPU family 0x%x not supported\n", c->x86);
+		return NULL;
+	}
+
 	return &microcode_intel_ops;
 }
 
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 733ca39..43d8b48 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -423,6 +423,7 @@
 		current_thread_info()->status |= TS_COMPAT;
 	}
 }
+EXPORT_SYMBOL_GPL(set_personality_ia32);
 
 unsigned long get_wchan(struct task_struct *p)
 {
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 71f4727..5a98aa2 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -185,10 +185,22 @@
 #endif
 	rc = -EINVAL;
 	if (pcpu_chosen_fc != PCPU_FC_PAGE) {
-		const size_t atom_size = cpu_has_pse ? PMD_SIZE : PAGE_SIZE;
 		const size_t dyn_size = PERCPU_MODULE_RESERVE +
 			PERCPU_DYNAMIC_RESERVE - PERCPU_FIRST_CHUNK_RESERVE;
+		size_t atom_size;
 
+		/*
+		 * On 64bit, use PMD_SIZE for atom_size so that embedded
+		 * percpu areas are aligned to PMD.  This, in the future,
+		 * can also allow using PMD mappings in vmalloc area.  Use
+		 * PAGE_SIZE on 32bit as vmalloc space is highly contended
+		 * and large vmalloc area allocs can easily fail.
+		 */
+#ifdef CONFIG_X86_64
+		atom_size = PMD_SIZE;
+#else
+		atom_size = PAGE_SIZE;
+#endif
 		rc = pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
 					    dyn_size, atom_size,
 					    pcpu_cpu_distance,
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index f386dc4..7515cf0 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -216,9 +216,9 @@
 	current_thread_info()->sig_on_uaccess_error = 1;
 
 	/*
-	 * 0 is a valid user pointer (in the access_ok sense) on 32-bit and
+	 * NULL is a valid user pointer (in the access_ok sense) on 32-bit and
 	 * 64-bit, so we don't need to special-case it here.  For all the
-	 * vsyscalls, 0 means "don't write anything" not "write it at
+	 * vsyscalls, NULL means "don't write anything" not "write it at
 	 * address 0".
 	 */
 	ret = -EFAULT;
@@ -247,7 +247,7 @@
 
 		ret = sys_getcpu((unsigned __user *)regs->di,
 				 (unsigned __user *)regs->si,
-				 0);
+				 NULL);
 		break;
 	}
 
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e9f265f..9cf71d0 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -93,7 +93,6 @@
 struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 	.early_percpu_clock_init	= x86_init_noop,
 	.setup_percpu_clockev		= setup_secondary_APIC_clock,
-	.fixup_cpu_id			= x86_default_fixup_cpu_id,
 };
 
 static void default_nmi_init(void) { };
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 173df38..2e88438 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -459,17 +459,17 @@
 	pmu->available_event_types = ~entry->ebx & ((1ull << bitmap_len) - 1);
 
 	if (pmu->version == 1) {
-		pmu->global_ctrl = (1 << pmu->nr_arch_gp_counters) - 1;
-		return;
+		pmu->nr_arch_fixed_counters = 0;
+	} else {
+		pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f),
+				X86_PMC_MAX_FIXED);
+		pmu->counter_bitmask[KVM_PMC_FIXED] =
+			((u64)1 << ((entry->edx >> 5) & 0xff)) - 1;
 	}
 
-	pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f),
-			X86_PMC_MAX_FIXED);
-	pmu->counter_bitmask[KVM_PMC_FIXED] =
-		((u64)1 << ((entry->edx >> 5) & 0xff)) - 1;
-	pmu->global_ctrl_mask = ~(((1 << pmu->nr_arch_gp_counters) - 1)
-			| (((1ull << pmu->nr_arch_fixed_counters) - 1)
-				<< X86_PMC_IDX_FIXED));
+	pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) |
+		(((1ull << pmu->nr_arch_fixed_counters) - 1) << X86_PMC_IDX_FIXED);
+	pmu->global_ctrl_mask = ~pmu->global_ctrl;
 }
 
 void kvm_pmu_init(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ad85adf..4ff0ab9 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2210,9 +2210,12 @@
 		msr = find_msr_entry(vmx, msr_index);
 		if (msr) {
 			msr->data = data;
-			if (msr - vmx->guest_msrs < vmx->save_nmsrs)
+			if (msr - vmx->guest_msrs < vmx->save_nmsrs) {
+				preempt_disable();
 				kvm_set_shared_msr(msr->index, msr->data,
 						   msr->mask);
+				preempt_enable();
+			}
 			break;
 		}
 		ret = kvm_set_msr_common(vcpu, msr_index, data);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 4044ce0..185a2b8 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6336,13 +6336,11 @@
 		if (npages && !old.rmap) {
 			unsigned long userspace_addr;
 
-			down_write(&current->mm->mmap_sem);
-			userspace_addr = do_mmap(NULL, 0,
+			userspace_addr = vm_mmap(NULL, 0,
 						 npages * PAGE_SIZE,
 						 PROT_READ | PROT_WRITE,
 						 map_flags,
 						 0);
-			up_write(&current->mm->mmap_sem);
 
 			if (IS_ERR((void *)userspace_addr))
 				return PTR_ERR((void *)userspace_addr);
@@ -6366,10 +6364,8 @@
 	if (!user_alloc && !old.user_alloc && old.rmap && !npages) {
 		int ret;
 
-		down_write(&current->mm->mmap_sem);
-		ret = do_munmap(current->mm, old.userspace_addr,
+		ret = vm_munmap(old.userspace_addr,
 				old.npages * PAGE_SIZE);
-		up_write(&current->mm->mmap_sem);
 		if (ret < 0)
 			printk(KERN_WARNING
 			       "kvm_vm_ioctl_set_memory_region: "
@@ -6585,6 +6581,7 @@
 		kvm_inject_page_fault(vcpu, &fault);
 	}
 	vcpu->arch.apf.halted = false;
+	vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 }
 
 bool kvm_arch_can_inject_async_page_present(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
index 25feb1a..b1e6c4b 100644
--- a/arch/x86/lib/insn.c
+++ b/arch/x86/lib/insn.c
@@ -379,8 +379,8 @@
 	return;
 }
 
-/* Decode moffset16/32/64 */
-static void __get_moffset(struct insn *insn)
+/* Decode moffset16/32/64. Return 0 if failed */
+static int __get_moffset(struct insn *insn)
 {
 	switch (insn->addr_bytes) {
 	case 2:
@@ -397,15 +397,19 @@
 		insn->moffset2.value = get_next(int, insn);
 		insn->moffset2.nbytes = 4;
 		break;
+	default:	/* opnd_bytes must be modified manually */
+		goto err_out;
 	}
 	insn->moffset1.got = insn->moffset2.got = 1;
 
+	return 1;
+
 err_out:
-	return;
+	return 0;
 }
 
-/* Decode imm v32(Iz) */
-static void __get_immv32(struct insn *insn)
+/* Decode imm v32(Iz). Return 0 if failed */
+static int __get_immv32(struct insn *insn)
 {
 	switch (insn->opnd_bytes) {
 	case 2:
@@ -417,14 +421,18 @@
 		insn->immediate.value = get_next(int, insn);
 		insn->immediate.nbytes = 4;
 		break;
+	default:	/* opnd_bytes must be modified manually */
+		goto err_out;
 	}
 
+	return 1;
+
 err_out:
-	return;
+	return 0;
 }
 
-/* Decode imm v64(Iv/Ov) */
-static void __get_immv(struct insn *insn)
+/* Decode imm v64(Iv/Ov), Return 0 if failed */
+static int __get_immv(struct insn *insn)
 {
 	switch (insn->opnd_bytes) {
 	case 2:
@@ -441,15 +449,18 @@
 		insn->immediate2.value = get_next(int, insn);
 		insn->immediate2.nbytes = 4;
 		break;
+	default:	/* opnd_bytes must be modified manually */
+		goto err_out;
 	}
 	insn->immediate1.got = insn->immediate2.got = 1;
 
+	return 1;
 err_out:
-	return;
+	return 0;
 }
 
 /* Decode ptr16:16/32(Ap) */
-static void __get_immptr(struct insn *insn)
+static int __get_immptr(struct insn *insn)
 {
 	switch (insn->opnd_bytes) {
 	case 2:
@@ -462,14 +473,17 @@
 		break;
 	case 8:
 		/* ptr16:64 is not exist (no segment) */
-		return;
+		return 0;
+	default:	/* opnd_bytes must be modified manually */
+		goto err_out;
 	}
 	insn->immediate2.value = get_next(unsigned short, insn);
 	insn->immediate2.nbytes = 2;
 	insn->immediate1.got = insn->immediate2.got = 1;
 
+	return 1;
 err_out:
-	return;
+	return 0;
 }
 
 /**
@@ -489,7 +503,8 @@
 		insn_get_displacement(insn);
 
 	if (inat_has_moffset(insn->attr)) {
-		__get_moffset(insn);
+		if (!__get_moffset(insn))
+			goto err_out;
 		goto done;
 	}
 
@@ -517,16 +532,20 @@
 		insn->immediate2.nbytes = 4;
 		break;
 	case INAT_IMM_PTR:
-		__get_immptr(insn);
+		if (!__get_immptr(insn))
+			goto err_out;
 		break;
 	case INAT_IMM_VWORD32:
-		__get_immv32(insn);
+		if (!__get_immv32(insn))
+			goto err_out;
 		break;
 	case INAT_IMM_VWORD:
-		__get_immv(insn);
+		if (!__get_immv(insn))
+			goto err_out;
 		break;
 	default:
-		break;
+		/* Here, insn must have an immediate, but failed */
+		goto err_out;
 	}
 	if (inat_has_second_immediate(insn->attr)) {
 		insn->immediate2.value = get_next(char, insn);
diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index 97be9cb..d6ae30b 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -7,6 +7,8 @@
 #include <linux/highmem.h>
 #include <linux/module.h>
 
+#include <asm/word-at-a-time.h>
+
 /*
  * best effort, GUP based copy_from_user() that is NMI-safe
  */
@@ -41,3 +43,104 @@
 	return len;
 }
 EXPORT_SYMBOL_GPL(copy_from_user_nmi);
+
+static inline unsigned long count_bytes(unsigned long mask)
+{
+	mask = (mask - 1) & ~mask;
+	mask >>= 7;
+	return count_masked_bytes(mask);
+}
+
+/*
+ * Do a strncpy, return length of string without final '\0'.
+ * 'count' is the user-supplied count (return 'count' if we
+ * hit it), 'max' is the address space maximum (and we return
+ * -EFAULT if we hit it).
+ */
+static inline long do_strncpy_from_user(char *dst, const char __user *src, long count, unsigned long max)
+{
+	long res = 0;
+
+	/*
+	 * Truncate 'max' to the user-specified limit, so that
+	 * we only have one limit we need to check in the loop
+	 */
+	if (max > count)
+		max = count;
+
+	while (max >= sizeof(unsigned long)) {
+		unsigned long c;
+
+		/* Fall back to byte-at-a-time if we get a page fault */
+		if (unlikely(__get_user(c,(unsigned long __user *)(src+res))))
+			break;
+		/* This can write a few bytes past the NUL character, but that's ok */
+		*(unsigned long *)(dst+res) = c;
+		c = has_zero(c);
+		if (c)
+			return res + count_bytes(c);
+		res += sizeof(unsigned long);
+		max -= sizeof(unsigned long);
+	}
+
+	while (max) {
+		char c;
+
+		if (unlikely(__get_user(c,src+res)))
+			return -EFAULT;
+		dst[res] = c;
+		if (!c)
+			return res;
+		res++;
+		max--;
+	}
+
+	/*
+	 * Uhhuh. We hit 'max'. But was that the user-specified maximum
+	 * too? If so, that's ok - we got as much as the user asked for.
+	 */
+	if (res >= count)
+		return res;
+
+	/*
+	 * Nope: we hit the address space limit, and we still had more
+	 * characters the caller would have wanted. That's an EFAULT.
+	 */
+	return -EFAULT;
+}
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	unsigned long max_addr, src_addr;
+
+	if (unlikely(count <= 0))
+		return 0;
+
+	max_addr = current_thread_info()->addr_limit.seg;
+	src_addr = (unsigned long)src;
+	if (likely(src_addr < max_addr)) {
+		unsigned long max = max_addr - src_addr;
+		return do_strncpy_from_user(dst, src, count, max);
+	}
+	return -EFAULT;
+}
+EXPORT_SYMBOL(strncpy_from_user);
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index d9b094c..ef2a6a5 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -33,93 +33,6 @@
 	__movsl_is_ok((unsigned long)(a1), (unsigned long)(a2), (n))
 
 /*
- * Copy a null terminated string from userspace.
- */
-
-#define __do_strncpy_from_user(dst, src, count, res)			   \
-do {									   \
-	int __d0, __d1, __d2;						   \
-	might_fault();							   \
-	__asm__ __volatile__(						   \
-		"	testl %1,%1\n"					   \
-		"	jz 2f\n"					   \
-		"0:	lodsb\n"					   \
-		"	stosb\n"					   \
-		"	testb %%al,%%al\n"				   \
-		"	jz 1f\n"					   \
-		"	decl %1\n"					   \
-		"	jnz 0b\n"					   \
-		"1:	subl %1,%0\n"					   \
-		"2:\n"							   \
-		".section .fixup,\"ax\"\n"				   \
-		"3:	movl %5,%0\n"					   \
-		"	jmp 2b\n"					   \
-		".previous\n"						   \
-		_ASM_EXTABLE(0b,3b)					   \
-		: "=&d"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),	   \
-		  "=&D" (__d2)						   \
-		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
-		: "memory");						   \
-} while (0)
-
-/**
- * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- * Caller must check the specified block with access_ok() before calling
- * this function.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-long
-__strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-EXPORT_SYMBOL(__strncpy_from_user);
-
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-long
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
  * Zero Userspace
  */
 
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index b7c2849..0d0326f 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -9,55 +9,6 @@
 #include <asm/uaccess.h>
 
 /*
- * Copy a null terminated string from userspace.
- */
-
-#define __do_strncpy_from_user(dst,src,count,res)			   \
-do {									   \
-	long __d0, __d1, __d2;						   \
-	might_fault();							   \
-	__asm__ __volatile__(						   \
-		"	testq %1,%1\n"					   \
-		"	jz 2f\n"					   \
-		"0:	lodsb\n"					   \
-		"	stosb\n"					   \
-		"	testb %%al,%%al\n"				   \
-		"	jz 1f\n"					   \
-		"	decq %1\n"					   \
-		"	jnz 0b\n"					   \
-		"1:	subq %1,%0\n"					   \
-		"2:\n"							   \
-		".section .fixup,\"ax\"\n"				   \
-		"3:	movq %5,%0\n"					   \
-		"	jmp 2b\n"					   \
-		".previous\n"						   \
-		_ASM_EXTABLE(0b,3b)					   \
-		: "=&r"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),	   \
-		  "=&D" (__d2)						   \
-		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
-		: "memory");						   \
-} while (0)
-
-long
-__strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-EXPORT_SYMBOL(__strncpy_from_user);
-
-long
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		return __strncpy_from_user(dst, src, count);
-	return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
  * Zero Userspace
  */
 
diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c
index 66d377e..646e3b5 100644
--- a/arch/x86/platform/geode/net5501.c
+++ b/arch/x86/platform/geode/net5501.c
@@ -63,7 +63,7 @@
 		.name = "net5501:1",
 		.gpio = 6,
 		.default_trigger = "default-on",
-		.active_low = 1,
+		.active_low = 0,
 	},
 };
 
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index e0a3723..e31bcd8 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -805,7 +805,7 @@
 		} else
 			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
 	}
-	intel_scu_notifier_post(SCU_AVAILABLE, 0L);
+	intel_scu_notifier_post(SCU_AVAILABLE, NULL);
 }
 EXPORT_SYMBOL_GPL(intel_scu_devices_create);
 
@@ -814,7 +814,7 @@
 {
 	int i;
 
-	intel_scu_notifier_post(SCU_DOWN, 0L);
+	intel_scu_notifier_post(SCU_DOWN, NULL);
 
 	for (i = 0; i < ipc_next_dev; i++)
 		platform_device_del(ipc_devs[i]);
diff --git a/arch/x86/tools/.gitignore b/arch/x86/tools/.gitignore
new file mode 100644
index 0000000..be0ed06
--- /dev/null
+++ b/arch/x86/tools/.gitignore
@@ -0,0 +1 @@
+relocs
diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile
index d511aa9..733057b 100644
--- a/arch/x86/tools/Makefile
+++ b/arch/x86/tools/Makefile
@@ -36,3 +36,7 @@
 $(obj)/test_get_len.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
 
 $(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
+
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include
+hostprogs-y	+= relocs
+relocs: $(obj)/relocs
diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/tools/relocs.c
similarity index 76%
rename from arch/x86/boot/compressed/relocs.c
rename to arch/x86/tools/relocs.c
index d3c0b02..b43cfcd 100644
--- a/arch/x86/boot/compressed/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -18,6 +18,8 @@
 static Elf32_Ehdr ehdr;
 static unsigned long reloc_count, reloc_idx;
 static unsigned long *relocs;
+static unsigned long reloc16_count, reloc16_idx;
+static unsigned long *relocs16;
 
 struct section {
 	Elf32_Shdr     shdr;
@@ -28,52 +30,86 @@
 };
 static struct section *secs;
 
+enum symtype {
+	S_ABS,
+	S_REL,
+	S_SEG,
+	S_LIN,
+	S_NSYMTYPES
+};
+
+static const char * const sym_regex_kernel[S_NSYMTYPES] = {
 /*
  * Following symbols have been audited. There values are constant and do
  * not change if bzImage is loaded at a different physical address than
  * the address for which it has been compiled. Don't warn user about
  * absolute relocations present w.r.t these symbols.
  */
-static const char abs_sym_regex[] =
+	[S_ABS] =
 	"^(xen_irq_disable_direct_reloc$|"
 	"xen_save_fl_direct_reloc$|"
 	"VDSO|"
-	"__crc_)";
-static regex_t abs_sym_regex_c;
-static int is_abs_reloc(const char *sym_name)
-{
-	return !regexec(&abs_sym_regex_c, sym_name, 0, NULL, 0);
-}
+	"__crc_)",
 
 /*
  * These symbols are known to be relative, even if the linker marks them
  * as absolute (typically defined outside any section in the linker script.)
  */
-static const char rel_sym_regex[] =
-	"^_end$";
-static regex_t rel_sym_regex_c;
-static int is_rel_reloc(const char *sym_name)
+	[S_REL] =
+	"^(__init_(begin|end)|"
+	"__x86_cpu_dev_(start|end)|"
+	"(__parainstructions|__alt_instructions)(|_end)|"
+	"(__iommu_table|__apicdrivers|__smp_locks)(|_end)|"
+	"_end)$"
+};
+
+
+static const char * const sym_regex_realmode[S_NSYMTYPES] = {
+/*
+ * These are 16-bit segment symbols when compiling 16-bit code.
+ */
+	[S_SEG] =
+	"^real_mode_seg$",
+
+/*
+ * These are offsets belonging to segments, as opposed to linear addresses,
+ * when compiling 16-bit code.
+ */
+	[S_LIN] =
+	"^pa_",
+};
+
+static const char * const *sym_regex;
+
+static regex_t sym_regex_c[S_NSYMTYPES];
+static int is_reloc(enum symtype type, const char *sym_name)
 {
-	return !regexec(&rel_sym_regex_c, sym_name, 0, NULL, 0);
+	return sym_regex[type] &&
+		!regexec(&sym_regex_c[type], sym_name, 0, NULL, 0);
 }
 
-static void regex_init(void)
+static void regex_init(int use_real_mode)
 {
         char errbuf[128];
         int err;
-	
-        err = regcomp(&abs_sym_regex_c, abs_sym_regex,
-                      REG_EXTENDED|REG_NOSUB);
-        if (err) {
-                regerror(err, &abs_sym_regex_c, errbuf, sizeof errbuf);
-                die("%s", errbuf);
-        }
+	int i;
 
-        err = regcomp(&rel_sym_regex_c, rel_sym_regex,
-                      REG_EXTENDED|REG_NOSUB);
-        if (err) {
-                regerror(err, &rel_sym_regex_c, errbuf, sizeof errbuf);
-                die("%s", errbuf);
+	if (use_real_mode)
+		sym_regex = sym_regex_realmode;
+	else
+		sym_regex = sym_regex_kernel;
+
+	for (i = 0; i < S_NSYMTYPES; i++) {
+		if (!sym_regex[i])
+			continue;
+
+		err = regcomp(&sym_regex_c[i], sym_regex[i],
+			      REG_EXTENDED|REG_NOSUB);
+
+		if (err) {
+			regerror(err, &sym_regex_c[i], errbuf, sizeof errbuf);
+			die("%s", errbuf);
+		}
         }
 }
 
@@ -154,6 +190,10 @@
 		REL_TYPE(R_386_RELATIVE),
 		REL_TYPE(R_386_GOTOFF),
 		REL_TYPE(R_386_GOTPC),
+		REL_TYPE(R_386_8),
+		REL_TYPE(R_386_PC8),
+		REL_TYPE(R_386_16),
+		REL_TYPE(R_386_PC16),
 #undef REL_TYPE
 	};
 	const char *name = "unknown type rel type name";
@@ -189,7 +229,7 @@
 		name = sym_strtab + sym->st_name;
 	}
 	else {
-		name = sec_name(secs[sym->st_shndx].shdr.sh_name);
+		name = sec_name(sym->st_shndx);
 	}
 	return name;
 }
@@ -403,13 +443,11 @@
 	for (i = 0; i < ehdr.e_shnum; i++) {
 		struct section *sec = &secs[i];
 		char *sym_strtab;
-		Elf32_Sym *sh_symtab;
 		int j;
 
 		if (sec->shdr.sh_type != SHT_SYMTAB) {
 			continue;
 		}
-		sh_symtab = sec->symtab;
 		sym_strtab = sec->link->strtab;
 		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) {
 			Elf32_Sym *sym;
@@ -474,7 +512,7 @@
 			 * Before warning check if this absolute symbol
 			 * relocation is harmless.
 			 */
-			if (is_abs_reloc(name) || is_rel_reloc(name))
+			if (is_reloc(S_ABS, name) || is_reloc(S_REL, name))
 				continue;
 
 			if (!printed) {
@@ -498,7 +536,8 @@
 		printf("\n");
 }
 
-static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
+static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym),
+			int use_real_mode)
 {
 	int i;
 	/* Walk through the relocations */
@@ -523,30 +562,67 @@
 			Elf32_Rel *rel;
 			Elf32_Sym *sym;
 			unsigned r_type;
+			const char *symname;
+			int shn_abs;
+
 			rel = &sec->reltab[j];
 			sym = &sh_symtab[ELF32_R_SYM(rel->r_info)];
 			r_type = ELF32_R_TYPE(rel->r_info);
-			/* Don't visit relocations to absolute symbols */
-			if (sym->st_shndx == SHN_ABS &&
-			    !is_rel_reloc(sym_name(sym_strtab, sym))) {
-				continue;
-			}
+
+			shn_abs = sym->st_shndx == SHN_ABS;
+
 			switch (r_type) {
 			case R_386_NONE:
 			case R_386_PC32:
+			case R_386_PC16:
+			case R_386_PC8:
 				/*
 				 * NONE can be ignored and and PC relative
 				 * relocations don't need to be adjusted.
 				 */
 				break;
+
+			case R_386_16:
+				symname = sym_name(sym_strtab, sym);
+				if (!use_real_mode)
+					goto bad;
+				if (shn_abs) {
+					if (is_reloc(S_ABS, symname))
+						break;
+					else if (!is_reloc(S_SEG, symname))
+						goto bad;
+				} else {
+					if (is_reloc(S_LIN, symname))
+						goto bad;
+					else
+						break;
+				}
+				visit(rel, sym);
+				break;
+
 			case R_386_32:
-				/* Visit relocations that need to be adjusted */
+				symname = sym_name(sym_strtab, sym);
+				if (shn_abs) {
+					if (is_reloc(S_ABS, symname))
+						break;
+					else if (!is_reloc(S_REL, symname))
+						goto bad;
+				} else {
+					if (use_real_mode &&
+					    !is_reloc(S_LIN, symname))
+						break;
+				}
 				visit(rel, sym);
 				break;
 			default:
 				die("Unsupported relocation type: %s (%d)\n",
 				    rel_type(r_type), r_type);
 				break;
+			bad:
+				symname = sym_name(sym_strtab, sym);
+				die("Invalid %s %s relocation: %s\n",
+				    shn_abs ? "absolute" : "relative",
+				    rel_type(r_type), symname);
 			}
 		}
 	}
@@ -554,13 +630,19 @@
 
 static void count_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
 {
-	reloc_count += 1;
+	if (ELF32_R_TYPE(rel->r_info) == R_386_16)
+		reloc16_count++;
+	else
+		reloc_count++;
 }
 
 static void collect_reloc(Elf32_Rel *rel, Elf32_Sym *sym)
 {
 	/* Remember the address that needs to be adjusted. */
-	relocs[reloc_idx++] = rel->r_offset;
+	if (ELF32_R_TYPE(rel->r_info) == R_386_16)
+		relocs16[reloc16_idx++] = rel->r_offset;
+	else
+		relocs[reloc_idx++] = rel->r_offset;
 }
 
 static int cmp_relocs(const void *va, const void *vb)
@@ -570,23 +652,41 @@
 	return (*a == *b)? 0 : (*a > *b)? 1 : -1;
 }
 
-static void emit_relocs(int as_text)
+static int write32(unsigned int v, FILE *f)
+{
+	unsigned char buf[4];
+
+	put_unaligned_le32(v, buf);
+	return fwrite(buf, 1, 4, f) == 4 ? 0 : -1;
+}
+
+static void emit_relocs(int as_text, int use_real_mode)
 {
 	int i;
 	/* Count how many relocations I have and allocate space for them. */
 	reloc_count = 0;
-	walk_relocs(count_reloc);
+	walk_relocs(count_reloc, use_real_mode);
 	relocs = malloc(reloc_count * sizeof(relocs[0]));
 	if (!relocs) {
 		die("malloc of %d entries for relocs failed\n",
 			reloc_count);
 	}
+
+	relocs16 = malloc(reloc16_count * sizeof(relocs[0]));
+	if (!relocs16) {
+		die("malloc of %d entries for relocs16 failed\n",
+			reloc16_count);
+	}
 	/* Collect up the relocations */
 	reloc_idx = 0;
-	walk_relocs(collect_reloc);
+	walk_relocs(collect_reloc, use_real_mode);
+
+	if (reloc16_count && !use_real_mode)
+		die("Segment relocations found but --realmode not specified\n");
 
 	/* Order the relocations for more efficient processing */
 	qsort(relocs, reloc_count, sizeof(relocs[0]), cmp_relocs);
+	qsort(relocs16, reloc16_count, sizeof(relocs16[0]), cmp_relocs);
 
 	/* Print the relocations */
 	if (as_text) {
@@ -595,58 +695,83 @@
 		 */
 		printf(".section \".data.reloc\",\"a\"\n");
 		printf(".balign 4\n");
-		for (i = 0; i < reloc_count; i++) {
-			printf("\t .long 0x%08lx\n", relocs[i]);
+		if (use_real_mode) {
+			printf("\t.long %lu\n", reloc16_count);
+			for (i = 0; i < reloc16_count; i++)
+				printf("\t.long 0x%08lx\n", relocs16[i]);
+			printf("\t.long %lu\n", reloc_count);
+			for (i = 0; i < reloc_count; i++) {
+				printf("\t.long 0x%08lx\n", relocs[i]);
+			}
+		} else {
+			/* Print a stop */
+			printf("\t.long 0x%08lx\n", (unsigned long)0);
+			for (i = 0; i < reloc_count; i++) {
+				printf("\t.long 0x%08lx\n", relocs[i]);
+			}
 		}
+
 		printf("\n");
 	}
 	else {
-		unsigned char buf[4];
-		/* Print a stop */
-		fwrite("\0\0\0\0", 4, 1, stdout);
-		/* Now print each relocation */
-		for (i = 0; i < reloc_count; i++) {
-			put_unaligned_le32(relocs[i], buf);
-			fwrite(buf, 4, 1, stdout);
+		if (use_real_mode) {
+			write32(reloc16_count, stdout);
+			for (i = 0; i < reloc16_count; i++)
+				write32(relocs16[i], stdout);
+			write32(reloc_count, stdout);
+
+			/* Now print each relocation */
+			for (i = 0; i < reloc_count; i++)
+				write32(relocs[i], stdout);
+		} else {
+			/* Print a stop */
+			write32(0, stdout);
+
+			/* Now print each relocation */
+			for (i = 0; i < reloc_count; i++) {
+				write32(relocs[i], stdout);
+			}
 		}
 	}
 }
 
 static void usage(void)
 {
-	die("relocs [--abs-syms |--abs-relocs | --text] vmlinux\n");
+	die("relocs [--abs-syms|--abs-relocs|--text|--realmode] vmlinux\n");
 }
 
 int main(int argc, char **argv)
 {
 	int show_absolute_syms, show_absolute_relocs;
-	int as_text;
+	int as_text, use_real_mode;
 	const char *fname;
 	FILE *fp;
 	int i;
 
-	regex_init();
-
 	show_absolute_syms = 0;
 	show_absolute_relocs = 0;
 	as_text = 0;
+	use_real_mode = 0;
 	fname = NULL;
 	for (i = 1; i < argc; i++) {
 		char *arg = argv[i];
 		if (*arg == '-') {
-			if (strcmp(argv[1], "--abs-syms") == 0) {
+			if (strcmp(arg, "--abs-syms") == 0) {
 				show_absolute_syms = 1;
 				continue;
 			}
-
-			if (strcmp(argv[1], "--abs-relocs") == 0) {
+			if (strcmp(arg, "--abs-relocs") == 0) {
 				show_absolute_relocs = 1;
 				continue;
 			}
-			else if (strcmp(argv[1], "--text") == 0) {
+			if (strcmp(arg, "--text") == 0) {
 				as_text = 1;
 				continue;
 			}
+			if (strcmp(arg, "--realmode") == 0) {
+				use_real_mode = 1;
+				continue;
+			}
 		}
 		else if (!fname) {
 			fname = arg;
@@ -657,6 +782,7 @@
 	if (!fname) {
 		usage();
 	}
+	regex_init(use_real_mode);
 	fp = fopen(fname, "r");
 	if (!fp) {
 		die("Cannot open %s: %s\n",
@@ -675,6 +801,6 @@
 		print_absolute_relocs();
 		return 0;
 	}
-	emit_relocs(as_text);
+	emit_relocs(as_text, use_real_mode);
 	return 0;
 }
diff --git a/arch/x86/um/asm/barrier.h b/arch/x86/um/asm/barrier.h
new file mode 100644
index 0000000..7d01b8c
--- /dev/null
+++ b/arch/x86/um/asm/barrier.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_UM_BARRIER_H_
+#define _ASM_UM_BARRIER_H_
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+
+#define mb()	alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb()	alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb()	alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+
+#else /* CONFIG_X86_32 */
+
+#define mb()	asm volatile("mfence" : : : "memory")
+#define rmb()	asm volatile("lfence" : : : "memory")
+#define wmb()	asm volatile("sfence" : : : "memory")
+
+#endif /* CONFIG_X86_32 */
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+#define smp_rmb()	rmb()
+#else /* CONFIG_X86_PPRO_FENCE */
+#define smp_rmb()	barrier()
+#endif /* CONFIG_X86_PPRO_FENCE */
+
+#ifdef CONFIG_X86_OOSTORE
+#define smp_wmb()	wmb()
+#else /* CONFIG_X86_OOSTORE */
+#define smp_wmb()	barrier()
+#endif /* CONFIG_X86_OOSTORE */
+
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+
+#else /* CONFIG_SMP */
+
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+
+#endif /* CONFIG_SMP */
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif
diff --git a/arch/x86/um/asm/system.h b/arch/x86/um/asm/system.h
deleted file mode 100644
index a459fd9..0000000
--- a/arch/x86/um/asm/system.h
+++ /dev/null
@@ -1,135 +0,0 @@
-#ifndef _ASM_X86_SYSTEM_H_
-#define _ASM_X86_SYSTEM_H_
-
-#include <asm/asm.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
-#include <asm/cmpxchg.h>
-#include <asm/nops.h>
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-/* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
-# define AT_VECTOR_SIZE_ARCH 2
-#else
-# define AT_VECTOR_SIZE_ARCH 1
-#endif
-
-extern unsigned long arch_align_stack(unsigned long sp);
-
-void default_idle(void);
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- */
-#ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define mb() 	asm volatile("mfence":::"memory")
-#define rmb()	asm volatile("lfence":::"memory")
-#define wmb()	asm volatile("sfence" ::: "memory")
-#endif
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends()	do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb()	rmb()
-#else
-# define smp_rmb()	barrier()
-#endif
-#ifdef CONFIG_X86_OOSTORE
-# define smp_wmb() 	wmb()
-#else
-# define smp_wmb()	barrier()
-#endif
-#define smp_read_barrier_depends()	read_barrier_depends()
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-/*
- * Stop RDTSC speculation. This is needed when you need to use RDTSC
- * (or get_cycles or vread that possibly accesses the TSC) in a defined
- * code region.
- *
- * (Could use an alternative three way for this if there was one.)
- */
-static inline void rdtsc_barrier(void)
-{
-	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
-	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-}
-
-extern void *_switch_to(void *prev, void *next, void *last);
-#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
-
-#endif
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 4f51beb..95dccce 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -63,6 +63,7 @@
 #include <asm/stackprotector.h>
 #include <asm/hypervisor.h>
 #include <asm/mwait.h>
+#include <asm/pci_x86.h>
 
 #ifdef CONFIG_ACPI
 #include <linux/acpi.h>
@@ -261,7 +262,8 @@
 
 static bool __init xen_check_mwait(void)
 {
-#ifdef CONFIG_ACPI
+#if defined(CONFIG_ACPI) && !defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) && \
+	!defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE)
 	struct xen_platform_op op = {
 		.cmd			= XENPF_set_processor_pminfo,
 		.u.set_pminfo.id	= -1,
@@ -349,7 +351,6 @@
 	/* Xen will set CR4.OSXSAVE if supported and not disabled by force */
 	if ((cx & xsave_mask) != xsave_mask)
 		cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */
-
 	if (xen_check_mwait())
 		cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32));
 }
@@ -809,9 +810,40 @@
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
+static unsigned long xen_set_apic_id(unsigned int x)
+{
+	WARN_ON(1);
+	return x;
+}
+static unsigned int xen_get_apic_id(unsigned long x)
+{
+	return ((x)>>24) & 0xFFu;
+}
 static u32 xen_apic_read(u32 reg)
 {
-	return 0;
+	struct xen_platform_op op = {
+		.cmd = XENPF_get_cpuinfo,
+		.interface_version = XENPF_INTERFACE_VERSION,
+		.u.pcpu_info.xen_cpuid = 0,
+	};
+	int ret = 0;
+
+	/* Shouldn't need this as APIC is turned off for PV, and we only
+	 * get called on the bootup processor. But just in case. */
+	if (!xen_initial_domain() || smp_processor_id())
+		return 0;
+
+	if (reg == APIC_LVR)
+		return 0x10;
+
+	if (reg != APIC_ID)
+		return 0;
+
+	ret = HYPERVISOR_dom0_op(&op);
+	if (ret)
+		return 0;
+
+	return op.u.pcpu_info.apic_id << 24;
 }
 
 static void xen_apic_write(u32 reg, u32 val)
@@ -849,6 +881,8 @@
 	apic->icr_write = xen_apic_icr_write;
 	apic->wait_icr_idle = xen_apic_wait_icr_idle;
 	apic->safe_wait_icr_idle = xen_safe_apic_wait_icr_idle;
+	apic->set_apic_id = xen_set_apic_id;
+	apic->get_apic_id = xen_get_apic_id;
 }
 
 #endif
@@ -1365,8 +1399,10 @@
 		/* Make sure ACS will be enabled */
 		pci_request_acs();
 	}
-		
-
+#ifdef CONFIG_PCI
+	/* PCI BIOS service won't work from a PV guest. */
+	pci_probe &= ~PCI_PROBE_BIOS;
+#endif
 	xen_raw_console_write("about to get started...\n");
 
 	xen_setup_runstate_info(0);
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index b8e2794..69f5857 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -353,8 +353,13 @@
 {
 	if (val & _PAGE_PRESENT) {
 		unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+		unsigned long pfn = mfn_to_pfn(mfn);
+
 		pteval_t flags = val & PTE_FLAGS_MASK;
-		val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
+		if (unlikely(pfn == ~0))
+			val = flags & ~_PAGE_PRESENT;
+		else
+			val = ((pteval_t)pfn << PAGE_SHIFT) | flags;
 	}
 
 	return val;
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 5fac691..0503c0c 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -178,6 +178,7 @@
 static void __init xen_filter_cpu_maps(void)
 {
 	int i, rc;
+	unsigned int subtract = 0;
 
 	if (!xen_initial_domain())
 		return;
@@ -192,8 +193,22 @@
 		} else {
 			set_cpu_possible(i, false);
 			set_cpu_present(i, false);
+			subtract++;
 		}
 	}
+#ifdef CONFIG_HOTPLUG_CPU
+	/* This is akin to using 'nr_cpus' on the Linux command line.
+	 * Which is OK as when we use 'dom0_max_vcpus=X' we can only
+	 * have up to X, while nr_cpu_ids is greater than X. This
+	 * normally is not a problem, except when CPU hotplugging
+	 * is involved and then there might be more than X CPUs
+	 * in the guest - which will not work as there is no
+	 * hypercall to expand the max number of VCPUs an already
+	 * running guest has. So cap it up to X. */
+	if (subtract)
+		nr_cpu_ids = nr_cpu_ids - subtract;
+#endif
+
 }
 
 static void __init xen_smp_prepare_boot_cpu(void)
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 79d7362..3e45aa0 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -96,7 +96,7 @@
 
 	/* check for unmasked and pending */
 	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
-	jz 1f
+	jnz 1f
 2:	call check_events
 1:
 ENDPATCH(xen_restore_fl_direct)
diff --git a/arch/xtensa/include/asm/hardirq.h b/arch/xtensa/include/asm/hardirq.h
index 26664ce..91695a1 100644
--- a/arch/xtensa/include/asm/hardirq.h
+++ b/arch/xtensa/include/asm/hardirq.h
@@ -11,9 +11,6 @@
 #ifndef _XTENSA_HARDIRQ_H
 #define _XTENSA_HARDIRQ_H
 
-void ack_bad_irq(unsigned int irq);
-#define ack_bad_irq ack_bad_irq
-
 #include <asm-generic/hardirq.h>
 
 #endif	/* _XTENSA_HARDIRQ_H */
diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h
index d04cd3a..4beb43c 100644
--- a/arch/xtensa/include/asm/io.h
+++ b/arch/xtensa/include/asm/io.h
@@ -14,6 +14,7 @@
 #ifdef __KERNEL__
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <linux/types.h>
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index b69b000..d78869a 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -496,6 +496,7 @@
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 
 	if (signr > 0) {
+		int ret;
 
 		/* Are we from a system call? */
 
diff --git a/block/blk-core.c b/block/blk-core.c
index 3a78b00..1f61b74 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -483,7 +483,7 @@
 	if (!q)
 		return NULL;
 
-	q->id = ida_simple_get(&blk_queue_ida, 0, 0, GFP_KERNEL);
+	q->id = ida_simple_get(&blk_queue_ida, 0, 0, gfp_mask);
 	if (q->id < 0)
 		goto fail_q;
 
@@ -1277,7 +1277,8 @@
 	list_for_each_entry_reverse(rq, &plug->list, queuelist) {
 		int el_ret;
 
-		(*request_count)++;
+		if (rq->q == q)
+			(*request_count)++;
 
 		if (rq->q != q || !blk_rq_merge_ok(rq, bio))
 			continue;
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 5eed6a7..f2ddb94 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -1218,7 +1218,7 @@
 	struct bio_list bl;
 	struct bio *bio;
 
-	WARN_ON_ONCE(!queue_is_locked(q));
+	queue_lockdep_assert_held(q);
 
 	bio_list_init(&bl);
 
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 4572952..3c38536 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -295,6 +295,7 @@
 	unsigned int cfq_slice_idle;
 	unsigned int cfq_group_idle;
 	unsigned int cfq_latency;
+	unsigned int cfq_target_latency;
 
 	/*
 	 * Fallback dummy cfqq for extreme OOM conditions
@@ -604,7 +605,7 @@
 {
 	struct cfq_rb_root *st = &cfqd->grp_service_tree;
 
-	return cfq_target_latency * cfqg->weight / st->total_weight;
+	return cfqd->cfq_target_latency * cfqg->weight / st->total_weight;
 }
 
 static inline unsigned
@@ -2271,7 +2272,8 @@
 		 * to have higher weight. A more accurate thing would be to
 		 * calculate system wide asnc/sync ratio.
 		 */
-		tmp = cfq_target_latency * cfqg_busy_async_queues(cfqd, cfqg);
+		tmp = cfqd->cfq_target_latency *
+			cfqg_busy_async_queues(cfqd, cfqg);
 		tmp = tmp/cfqd->busy_queues;
 		slice = min_t(unsigned, slice, tmp);
 
@@ -3737,6 +3739,7 @@
 	cfqd->cfq_back_penalty = cfq_back_penalty;
 	cfqd->cfq_slice[0] = cfq_slice_async;
 	cfqd->cfq_slice[1] = cfq_slice_sync;
+	cfqd->cfq_target_latency = cfq_target_latency;
 	cfqd->cfq_slice_async_rq = cfq_slice_async_rq;
 	cfqd->cfq_slice_idle = cfq_slice_idle;
 	cfqd->cfq_group_idle = cfq_group_idle;
@@ -3788,6 +3791,7 @@
 SHOW_FUNCTION(cfq_slice_async_show, cfqd->cfq_slice[0], 1);
 SHOW_FUNCTION(cfq_slice_async_rq_show, cfqd->cfq_slice_async_rq, 0);
 SHOW_FUNCTION(cfq_low_latency_show, cfqd->cfq_latency, 0);
+SHOW_FUNCTION(cfq_target_latency_show, cfqd->cfq_target_latency, 1);
 #undef SHOW_FUNCTION
 
 #define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, __CONV)			\
@@ -3821,6 +3825,7 @@
 STORE_FUNCTION(cfq_slice_async_rq_store, &cfqd->cfq_slice_async_rq, 1,
 		UINT_MAX, 0);
 STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0);
+STORE_FUNCTION(cfq_target_latency_store, &cfqd->cfq_target_latency, 1, UINT_MAX, 1);
 #undef STORE_FUNCTION
 
 #define CFQ_ATTR(name) \
@@ -3838,6 +3843,7 @@
 	CFQ_ATTR(slice_idle),
 	CFQ_ATTR(group_idle),
 	CFQ_ATTR(low_latency),
+	CFQ_ATTR(target_latency),
 	__ATTR_NULL
 };
 
diff --git a/block/genhd.c b/block/genhd.c
index df9816e..9cf5583 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -743,7 +743,7 @@
 		struct hd_struct *part;
 		char name_buf[BDEVNAME_SIZE];
 		char devt_buf[BDEVT_SIZE];
-		u8 uuid[PARTITION_META_INFO_UUIDLTH * 2 + 1];
+		char uuid_buf[PARTITION_META_INFO_UUIDLTH * 2 + 5];
 
 		/*
 		 * Don't show empty devices or things that have been
@@ -762,14 +762,16 @@
 		while ((part = disk_part_iter_next(&piter))) {
 			bool is_part0 = part == &disk->part0;
 
-			uuid[0] = 0;
+			uuid_buf[0] = '\0';
 			if (part->info)
-				part_unpack_uuid(part->info->uuid, uuid);
+				snprintf(uuid_buf, sizeof(uuid_buf), "%pU",
+					 part->info->uuid);
 
 			printk("%s%s %10llu %s %s", is_part0 ? "" : "  ",
 			       bdevt_str(part_devt(part), devt_buf),
 			       (unsigned long long)part->nr_sects >> 1,
-			       disk_name(disk, part->partno, name_buf), uuid);
+			       disk_name(disk, part->partno, name_buf),
+			       uuid_buf);
 			if (is_part0) {
 				if (disk->driverfs_dev != NULL &&
 				    disk->driverfs_dev->driver != NULL)
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 21ff9d0..8e84225 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -627,7 +627,7 @@
 
 config CRYPTO_BLOWFISH_X86_64
 	tristate "Blowfish cipher algorithm (x86_64)"
-	depends on (X86 || UML_X86) && 64BIT
+	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_BLOWFISH_COMMON
 	help
@@ -657,7 +657,7 @@
 
 config CRYPTO_CAMELLIA_X86_64
 	tristate "Camellia cipher algorithm (x86_64)"
-	depends on (X86 || UML_X86) && 64BIT
+	depends on X86 && 64BIT
 	depends on CRYPTO
 	select CRYPTO_ALGAPI
 	select CRYPTO_LRW
@@ -893,7 +893,7 @@
 
 config CRYPTO_TWOFISH_X86_64_3WAY
 	tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
-	depends on (X86 || UML_X86) && 64BIT
+	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_TWOFISH_COMMON
 	select CRYPTO_TWOFISH_X86_64
diff --git a/crypto/sha512_generic.c b/crypto/sha512_generic.c
index 107f6f7..dd30f40 100644
--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -174,7 +174,7 @@
 	index = sctx->count[0] & 0x7f;
 
 	/* Update number of bytes */
-	if (!(sctx->count[0] += len))
+	if ((sctx->count[0] += len) < len)
 		sctx->count[1]++;
 
         part_len = 128 - index;
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index ab513a9..a716fed 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -74,7 +74,8 @@
 
 	/* Check if the reset register is supported */
 
-	if (!reset_reg->address) {
+	if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+	    !reset_reg->address) {
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
 
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 3263b68..3188da3 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -250,6 +250,10 @@
 		return -ENODEV;
 	}
 
+	/* For D3cold we should execute _PS3, not _PS4. */
+	if (state == ACPI_STATE_D3_COLD)
+		object_name[3] = '3';
+
 	/*
 	 * Transition Power
 	 * ----------------
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index ba14fb9..c3881b2 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -607,8 +607,7 @@
 
 	acpi_irq_handler = handler;
 	acpi_irq_context = context;
-	if (request_threaded_irq(irq, NULL, acpi_irq, IRQF_SHARED, "acpi",
-				 acpi_irq)) {
+	if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) {
 		printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
 		acpi_irq_handler = NULL;
 		return AE_NOT_ACQUIRED;
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 7049a7d..0500f71 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -631,7 +631,7 @@
 	 * We know a device's inferred power state when all the resources
 	 * required for a given D-state are 'on'.
 	 */
-	for (i = ACPI_STATE_D0; i < ACPI_STATE_D3; i++) {
+	for (i = ACPI_STATE_D0; i < ACPI_STATE_D3_HOT; i++) {
 		list = &device->power.states[i].resources;
 		if (list->count < 1)
 			continue;
@@ -660,7 +660,7 @@
 
 int acpi_power_transition(struct acpi_device *device, int state)
 {
-	int result;
+	int result = 0;
 
 	if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
 		return -EINVAL;
@@ -679,8 +679,11 @@
 	 * (e.g. so the device doesn't lose power while transitioning).  Then,
 	 * we dereference all power resources used in the current list.
 	 */
-	result = acpi_power_on_list(&device->power.states[state].resources);
-	if (!result)
+	if (state < ACPI_STATE_D3_COLD)
+		result = acpi_power_on_list(
+			&device->power.states[state].resources);
+
+	if (!result && device->power.state < ACPI_STATE_D3_COLD)
 		acpi_power_off_list(
 			&device->power.states[device->power.state].resources);
 
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index c1d6124..a6c77e8b 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -23,7 +23,8 @@
 	/* Is the reset register supported? The spec says we should be
 	 * checking the bit width and bit offset, but Windows ignores
 	 * these fields */
-	/* Ignore also acpi_gbl_FADT.flags.ACPI_FADT_RESET_REGISTER */
+	if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER))
+		return;
 
 	reset_value = acpi_gbl_FADT.reset_value;
 
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 767e2dc..85cbfdc 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -869,7 +869,7 @@
 	/*
 	 * Enumerate supported power management states
 	 */
-	for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3; i++) {
+	for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
 		struct acpi_device_power_state *ps = &device->power.states[i];
 		char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' };
 
@@ -884,21 +884,18 @@
 				acpi_bus_add_power_resource(ps->resources.handles[j]);
 		}
 
-		/* The exist of _PR3 indicates D3Cold support */
-		if (i == ACPI_STATE_D3) {
-			status = acpi_get_handle(device->handle, object_name, &handle);
-			if (ACPI_SUCCESS(status))
-				device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
-		}
-
 		/* Evaluate "_PSx" to see if we can do explicit sets */
 		object_name[2] = 'S';
 		status = acpi_get_handle(device->handle, object_name, &handle);
 		if (ACPI_SUCCESS(status))
 			ps->flags.explicit_set = 1;
 
-		/* State is valid if we have some power control */
-		if (ps->resources.count || ps->flags.explicit_set)
+		/*
+		 * State is valid if there are means to put the device into it.
+		 * D3hot is only valid if _PR3 present.
+		 */
+		if (ps->resources.count ||
+		    (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
 			ps->flags.valid = 1;
 
 		ps->power = -1;	/* Unknown - driver assigned */
@@ -911,6 +908,10 @@
 	device->power.states[ACPI_STATE_D3].flags.valid = 1;
 	device->power.states[ACPI_STATE_D3].power = 0;
 
+	/* Set D3cold's explicit_set flag if _PS3 exists. */
+	if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set)
+		device->power.states[ACPI_STATE_D3_COLD].flags.explicit_set = 1;
+
 	acpi_bus_init_power(device);
 
 	return 0;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 1d661b5..eb6fd23 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -28,24 +28,34 @@
 #include "internal.h"
 #include "sleep.h"
 
+u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS;
 static unsigned int gts, bfs;
-module_param(gts, uint, 0644);
-module_param(bfs, uint, 0644);
+static int set_param_wake_flag(const char *val, struct kernel_param *kp)
+{
+	int ret = param_set_int(val, kp);
+
+	if (ret)
+		return ret;
+
+	if (kp->arg == (const char *)&gts) {
+		if (gts)
+			wake_sleep_flags |= ACPI_EXECUTE_GTS;
+		else
+			wake_sleep_flags &= ~ACPI_EXECUTE_GTS;
+	}
+	if (kp->arg == (const char *)&bfs) {
+		if (bfs)
+			wake_sleep_flags |= ACPI_EXECUTE_BFS;
+		else
+			wake_sleep_flags &= ~ACPI_EXECUTE_BFS;
+	}
+	return ret;
+}
+module_param_call(gts, set_param_wake_flag, param_get_int, &gts, 0644);
+module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644);
 MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
 MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
 
-static u8 wake_sleep_flags(void)
-{
-	u8 flags = ACPI_NO_OPTIONAL_METHODS;
-
-	if (gts)
-		flags |= ACPI_EXECUTE_GTS;
-	if (bfs)
-		flags |= ACPI_EXECUTE_BFS;
-
-	return flags;
-}
-
 static u8 sleep_states[ACPI_S_STATE_COUNT];
 
 static void acpi_sleep_tts_switch(u32 acpi_state)
@@ -263,7 +273,6 @@
 {
 	acpi_status status = AE_OK;
 	u32 acpi_state = acpi_target_sleep_state;
-	u8 flags = wake_sleep_flags();
 	int error;
 
 	ACPI_FLUSH_CPU_CACHE();
@@ -271,7 +280,7 @@
 	switch (acpi_state) {
 	case ACPI_STATE_S1:
 		barrier();
-		status = acpi_enter_sleep_state(acpi_state, flags);
+		status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags);
 		break;
 
 	case ACPI_STATE_S3:
@@ -286,7 +295,7 @@
 	acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
 
 	/* Reprogram control registers and execute _BFS */
-	acpi_leave_sleep_state_prep(acpi_state, flags);
+	acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags);
 
 	/* ACPI 3.0 specs (P62) says that it's the responsibility
 	 * of the OSPM to clear the status bit [ implying that the
@@ -550,30 +559,27 @@
 
 static int acpi_hibernation_enter(void)
 {
-	u8 flags = wake_sleep_flags();
 	acpi_status status = AE_OK;
 
 	ACPI_FLUSH_CPU_CACHE();
 
 	/* This shouldn't return.  If it returns, we have a problem */
-	status = acpi_enter_sleep_state(ACPI_STATE_S4, flags);
+	status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags);
 	/* Reprogram control registers and execute _BFS */
-	acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags);
+	acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
 
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
 
 static void acpi_hibernation_leave(void)
 {
-	u8 flags = wake_sleep_flags();
-
 	/*
 	 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 	 * enable it here.
 	 */
 	acpi_enable();
 	/* Reprogram control registers and execute _BFS */
-	acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags);
+	acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
 	/* Check the hardware signature */
 	if (facs && s4_hardware_signature != facs->hardware_signature) {
 		printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
@@ -828,12 +834,10 @@
 
 static void acpi_power_off(void)
 {
-	u8 flags = wake_sleep_flags();
-
 	/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 	printk(KERN_DEBUG "%s called\n", __func__);
 	local_irq_disable();
-	acpi_enter_sleep_state(ACPI_STATE_S5, flags);
+	acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags);
 }
 
 /*
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 01c2cf4..cc27322 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -247,8 +247,7 @@
 /*
  * Hooks to provide runtime PM of the pclk (bus clock).  It is safe to
  * enable/disable the bus clock at runtime PM suspend/resume as this
- * does not result in loss of context.  However, disabling vcore power
- * would do, so we leave that to the driver.
+ * does not result in loss of context.
  */
 static int amba_pm_runtime_suspend(struct device *dev)
 {
@@ -354,39 +353,6 @@
 	clk_put(pclk);
 }
 
-static int amba_get_enable_vcore(struct amba_device *pcdev)
-{
-	struct regulator *vcore = regulator_get(&pcdev->dev, "vcore");
-	int ret;
-
-	pcdev->vcore = vcore;
-
-	if (IS_ERR(vcore)) {
-		/* It is OK not to supply a vcore regulator */
-		if (PTR_ERR(vcore) == -ENODEV)
-			return 0;
-		return PTR_ERR(vcore);
-	}
-
-	ret = regulator_enable(vcore);
-	if (ret) {
-		regulator_put(vcore);
-		pcdev->vcore = ERR_PTR(-ENODEV);
-	}
-
-	return ret;
-}
-
-static void amba_put_disable_vcore(struct amba_device *pcdev)
-{
-	struct regulator *vcore = pcdev->vcore;
-
-	if (!IS_ERR(vcore)) {
-		regulator_disable(vcore);
-		regulator_put(vcore);
-	}
-}
-
 /*
  * These are the device model conversion veneers; they convert the
  * device model structures to our more specific structures.
@@ -399,10 +365,6 @@
 	int ret;
 
 	do {
-		ret = amba_get_enable_vcore(pcdev);
-		if (ret)
-			break;
-
 		ret = amba_get_enable_pclk(pcdev);
 		if (ret)
 			break;
@@ -420,7 +382,6 @@
 		pm_runtime_put_noidle(dev);
 
 		amba_put_disable_pclk(pcdev);
-		amba_put_disable_vcore(pcdev);
 	} while (0);
 
 	return ret;
@@ -442,7 +403,6 @@
 	pm_runtime_put_noidle(dev);
 
 	amba_put_disable_pclk(pcdev);
-	amba_put_disable_vcore(pcdev);
 
 	return ret;
 }
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 79a1e9d..ebaf67e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -394,6 +394,8 @@
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9128 */
 	{ PCI_DEVICE(0x1b4b, 0x9125),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9125 */
+	{ PCI_DEVICE(0x1b4b, 0x917a),
+	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 */
 	{ PCI_DEVICE(0x1b4b, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 0c86c77..9e419e1 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -280,6 +280,7 @@
 
 static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "calxeda,hb-ahci", },
+	{ .compatible = "snps,spear-ahci", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 68013f9..7857e8f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -329,6 +329,8 @@
 	{ 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (Lynx Point) */
 	{ 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (DH89xxCC) */
+	{ 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	{ }	/* terminate list */
 };
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e0bda9f..23763a1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -95,7 +95,7 @@
 static void ata_dev_xfermask(struct ata_device *dev);
 static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
 
-unsigned int ata_print_id = 1;
+atomic_t ata_print_id = ATOMIC_INIT(0);
 
 struct ata_force_param {
 	const char	*name;
@@ -6029,7 +6029,7 @@
 
 	/* give ports names and add SCSI hosts */
 	for (i = 0; i < host->n_ports; i++)
-		host->ports[i]->print_id = ata_print_id++;
+		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
 
 
 	/* Create associated sysfs transport objects  */
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index c61316e..d1fbd59 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3501,7 +3501,8 @@
 	u64 now = get_jiffies_64();
 	int *trials = void_arg;
 
-	if (ent->timestamp < now - min(now, interval))
+	if ((ent->eflags & ATA_EFLAG_OLD_ER) ||
+	    (ent->timestamp < now - min(now, interval)))
 		return -1;
 
 	(*trials)++;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1ee00c8..2222635 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3399,7 +3399,8 @@
 		 */
 		shost->max_host_blocked = 1;
 
-		rc = scsi_add_host(ap->scsi_host, &ap->tdev);
+		rc = scsi_add_host_with_dma(ap->scsi_host,
+						&ap->tdev, ap->host->dev);
 		if (rc)
 			goto err_add;
 	}
@@ -3838,18 +3839,25 @@
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_stop);
 
-int ata_sas_async_port_init(struct ata_port *ap)
+/**
+ * ata_sas_async_probe - simply schedule probing and return
+ * @ap: Port to probe
+ *
+ * For batch scheduling of probe for sas attached ata devices, assumes
+ * the port has already been through ata_sas_port_init()
+ */
+void ata_sas_async_probe(struct ata_port *ap)
 {
-	int rc = ap->ops->port_start(ap);
-
-	if (!rc) {
-		ap->print_id = ata_print_id++;
-		__ata_port_probe(ap);
-	}
-
-	return rc;
+	__ata_port_probe(ap);
 }
-EXPORT_SYMBOL_GPL(ata_sas_async_port_init);
+EXPORT_SYMBOL_GPL(ata_sas_async_probe);
+
+int ata_sas_sync_probe(struct ata_port *ap)
+{
+	return ata_port_probe(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_sync_probe);
+
 
 /**
  *	ata_sas_port_init - Initialize a SATA device
@@ -3866,12 +3874,10 @@
 {
 	int rc = ap->ops->port_start(ap);
 
-	if (!rc) {
-		ap->print_id = ata_print_id++;
-		rc = ata_port_probe(ap);
-	}
-
-	return rc;
+	if (rc)
+		return rc;
+	ap->print_id = atomic_inc_return(&ata_print_id);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_init);
 
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index 74aaee3..c341904 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -294,6 +294,7 @@
 	device_enable_async_suspend(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
+	pm_runtime_forbid(dev);
 
 	transport_add_device(dev);
 	transport_configure_device(dev);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 2e26fca..9d0fd0b 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -53,7 +53,7 @@
 	ATA_DNXFER_QUIET	= (1 << 31),
 };
 
-extern unsigned int ata_print_id;
+extern atomic_t ata_print_id;
 extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index fc2db2a..3239517 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -943,9 +943,9 @@
 
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(arasan_cf_pm_ops, arasan_cf_suspend, arasan_cf_resume);
-#endif
 
 static struct platform_driver arasan_cf_driver = {
 	.probe		= arasan_cf_probe,
@@ -953,9 +953,7 @@
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &arasan_cf_pm_ops,
-#endif
 	},
 };
 
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 38950ea..7336d4a 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4025,7 +4025,8 @@
 	struct ata_host *host;
 	struct mv_host_priv *hpriv;
 	struct resource *res;
-	int n_ports, rc;
+	int n_ports = 0;
+	int rc;
 
 	ata_print_version_once(&pdev->dev, DRV_VERSION);
 
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 7a3f535..bb80853 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -775,9 +775,11 @@
 			map->format.parse_val(val + i);
 	} else {
 		for (i = 0; i < val_count; i++) {
-			ret = regmap_read(map, reg + i, val + (i * val_bytes));
+			unsigned int ival;
+			ret = regmap_read(map, reg + i, &ival);
 			if (ret != 0)
 				return ret;
+			memcpy(val + (i * val_bytes), &ival, val_bytes);
 		}
 	}
 
diff --git a/drivers/base/soc.c b/drivers/base/soc.c
index 05f1503..ba29b2e 100644
--- a/drivers/base/soc.c
+++ b/drivers/base/soc.c
@@ -15,7 +15,7 @@
 #include <linux/sys_soc.h>
 #include <linux/err.h>
 
-static DEFINE_IDR(soc_ida);
+static DEFINE_IDA(soc_ida);
 static DEFINE_SPINLOCK(soc_lock);
 
 static ssize_t soc_info_get(struct device *dev,
@@ -168,8 +168,6 @@
 
 static int __init soc_bus_register(void)
 {
-	spin_lock_init(&soc_lock);
-
 	return bus_register(&soc_bus_type);
 }
 core_initcall(soc_bus_register);
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index c1172da..fb7c80f 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -29,7 +29,7 @@
 
 config BCMA_DRIVER_PCI_HOSTMODE
 	bool "Driver for PCI core working in hostmode"
-	depends on BCMA && MIPS
+	depends on BCMA && MIPS && BCMA_HOST_PCI
 	help
 	  PCI core hostmode operation (external PCI bus).
 
diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c
index 4e20bcf..d2097a1 100644
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
@@ -10,6 +10,7 @@
  */
 
 #include "bcma_private.h"
+#include <linux/pci.h>
 #include <linux/export.h>
 #include <linux/bcma/bcma.h>
 #include <asm/paccess.h>
diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
index cdcf75c..3e2a600 100644
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -404,16 +404,19 @@
 		return -EOPNOTSUPP;
 
 	if (!bcma_sprom_ext_available(bus)) {
+		bool sprom_onchip;
+
 		/*
 		 * External SPROM takes precedence so check
 		 * on-chip OTP only when no external SPROM
 		 * is present.
 		 */
-		if (bcma_sprom_onchip_available(bus)) {
+		sprom_onchip = bcma_sprom_onchip_available(bus);
+		if (sprom_onchip) {
 			/* determine offset */
 			offset = bcma_sprom_onchip_offset(bus);
 		}
-		if (!offset) {
+		if (!offset || !sprom_onchip) {
 			/*
 			 * Maybe there is no SPROM on the device?
 			 * Now we ask the arch code if there is some sprom
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 8db9089..9a13e88 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -6580,24 +6580,21 @@
 
 static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
 {
-	struct proc_dir_entry *StatusProcEntry;
 	struct proc_dir_entry *ControllerProcEntry;
-	struct proc_dir_entry *UserCommandProcEntry;
 
 	if (DAC960_ProcDirectoryEntry == NULL) {
-  		DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
-  		StatusProcEntry = proc_create("status", 0,
-					   DAC960_ProcDirectoryEntry,
-					   &dac960_proc_fops);
+		DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
+		proc_create("status", 0, DAC960_ProcDirectoryEntry,
+			    &dac960_proc_fops);
 	}
 
-      sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
-      ControllerProcEntry = proc_mkdir(Controller->ControllerName,
-				       DAC960_ProcDirectoryEntry);
-      proc_create_data("initial_status", 0, ControllerProcEntry, &dac960_initial_status_proc_fops, Controller);
-      proc_create_data("current_status", 0, ControllerProcEntry, &dac960_current_status_proc_fops, Controller);
-      UserCommandProcEntry = proc_create_data("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
-      Controller->ControllerProcEntry = ControllerProcEntry;
+	sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
+	ControllerProcEntry = proc_mkdir(Controller->ControllerName,
+					 DAC960_ProcDirectoryEntry);
+	proc_create_data("initial_status", 0, ControllerProcEntry, &dac960_initial_status_proc_fops, Controller);
+	proc_create_data("current_status", 0, ControllerProcEntry, &dac960_current_status_proc_fops, Controller);
+	proc_create_data("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
+	Controller->ControllerProcEntry = ControllerProcEntry;
 }
 
 
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e820b68..acda773 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -866,6 +866,7 @@
 	sh->can_queue = cciss_tape_cmds;
 	sh->sg_tablesize = h->maxsgentries;
 	sh->max_cmd_len = MAX_COMMAND_SIZE;
+	sh->max_sectors = h->cciss_max_sectors;
 
 	((struct cciss_scsi_adapter_data_t *) 
 		h->scsi_ctlr)->scsi_host = sh;
@@ -1410,7 +1411,7 @@
 	/* track how many SG entries we are using */
 	if (request_nsgs > h->maxSG)
 		h->maxSG = request_nsgs;
-	c->Header.SGTotal = (__u8) request_nsgs + chained;
+	c->Header.SGTotal = (u16) request_nsgs + chained;
 	if (request_nsgs > h->max_cmd_sgentries)
 		c->Header.SGList = h->max_cmd_sgentries;
 	else
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index abfaaca..946166e 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -2297,7 +2297,7 @@
 		return;
 	}
 
-	if (!cap_raised(current_cap(), CAP_SYS_ADMIN)) {
+	if (!capable(CAP_SYS_ADMIN)) {
 		retcode = ERR_PERM;
 		goto fail;
 	}
diff --git a/drivers/block/mtip32xx/Kconfig b/drivers/block/mtip32xx/Kconfig
index b5dd14e..0ba837f 100644
--- a/drivers/block/mtip32xx/Kconfig
+++ b/drivers/block/mtip32xx/Kconfig
@@ -4,6 +4,6 @@
 
 config BLK_DEV_PCIESSD_MTIP32XX
 	tristate "Block Device Driver for Micron PCIe SSDs"
-	depends on HOTPLUG_PCI_PCIE
+	depends on PCI
 	help
           This enables the block driver for Micron PCIe SSDs.
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 8eb81c9..304000c 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -36,6 +36,7 @@
 #include <linux/idr.h>
 #include <linux/kthread.h>
 #include <../drivers/ata/ahci.h>
+#include <linux/export.h>
 #include "mtip32xx.h"
 
 #define HW_CMD_SLOT_SZ		(MTIP_MAX_COMMAND_SLOTS * 32)
@@ -44,6 +45,7 @@
 #define HW_PORT_PRIV_DMA_SZ \
 		(HW_CMD_SLOT_SZ + HW_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ)
 
+#define HOST_CAP_NZDMA		(1 << 19)
 #define HOST_HSORG		0xFC
 #define HSORG_DISABLE_SLOTGRP_INTR (1<<24)
 #define HSORG_DISABLE_SLOTGRP_PXIS (1<<16)
@@ -139,6 +141,12 @@
 	int group = 0, commandslot = 0, commandindex = 0;
 	struct mtip_cmd *command;
 	struct mtip_port *port = dd->port;
+	static int in_progress;
+
+	if (in_progress)
+		return;
+
+	in_progress = 1;
 
 	for (group = 0; group < 4; group++) {
 		for (commandslot = 0; commandslot < 32; commandslot++) {
@@ -165,7 +173,8 @@
 
 	up(&port->cmd_slot);
 
-	atomic_set(&dd->drv_cleanup_done, true);
+	set_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag);
+	in_progress = 0;
 }
 
 /*
@@ -262,6 +271,9 @@
 		 && time_before(jiffies, timeout))
 		mdelay(1);
 
+	if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))
+		return -1;
+
 	if (readl(dd->mmio + HOST_CTL) & HOST_RESET)
 		return -1;
 
@@ -294,6 +306,10 @@
 			port->cmd_issue[MTIP_TAG_INDEX(tag)]);
 
 	spin_unlock_irqrestore(&port->cmd_issue_lock, flags);
+
+	/* Set the command's timeout value.*/
+	port->commands[tag].comp_time = jiffies + msecs_to_jiffies(
+					MTIP_NCQ_COMMAND_TIMEOUT_MS);
 }
 
 /*
@@ -420,7 +436,12 @@
 		writel(0xFFFFFFFF, port->completed[i]);
 
 	/* Clear any pending interrupts for this port */
-	writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT);
+	writel(readl(port->dd->mmio + PORT_IRQ_STAT),
+					port->dd->mmio + PORT_IRQ_STAT);
+
+	/* Clear any pending interrupts on the HBA. */
+	writel(readl(port->dd->mmio + HOST_IRQ_STAT),
+					port->dd->mmio + HOST_IRQ_STAT);
 
 	/* Enable port interrupts */
 	writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK);
@@ -447,6 +468,9 @@
 		 && time_before(jiffies, timeout))
 		;
 
+	if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+		return;
+
 	/*
 	 * Chip quirk: escalate to hba reset if
 	 * PxCMD.CR not clear after 500 ms
@@ -475,6 +499,9 @@
 	while (time_before(jiffies, timeout))
 		;
 
+	if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+		return;
+
 	/* Clear PxSCTL.DET */
 	writel(readl(port->mmio + PORT_SCR_CTL) & ~1,
 			 port->mmio + PORT_SCR_CTL);
@@ -486,15 +513,35 @@
 			 && time_before(jiffies, timeout))
 		;
 
+	if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+		return;
+
 	if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0)
 		dev_warn(&port->dd->pdev->dev,
 			"COM reset failed\n");
 
-	/* Clear SError, the PxSERR.DIAG.x should be set so clear it */
-	writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR);
+	mtip_init_port(port);
+	mtip_start_port(port);
 
-	/* Enable the DMA engine */
-	mtip_enable_engine(port, 1);
+}
+
+/*
+ * Helper function for tag logging
+ */
+static void print_tags(struct driver_data *dd,
+			char *msg,
+			unsigned long *tagbits,
+			int cnt)
+{
+	unsigned char tagmap[128];
+	int group, tagmap_len = 0;
+
+	memset(tagmap, 0, sizeof(tagmap));
+	for (group = SLOTBITS_IN_LONGS; group > 0; group--)
+		tagmap_len = sprintf(tagmap + tagmap_len, "%016lX ",
+						tagbits[group-1]);
+	dev_warn(&dd->pdev->dev,
+			"%d command(s) %s: tagmap [%s]", cnt, msg, tagmap);
 }
 
 /*
@@ -514,15 +561,18 @@
 	int tag, cmdto_cnt = 0;
 	unsigned int bit, group;
 	unsigned int num_command_slots = port->dd->slot_groups * 32;
+	unsigned long to, tagaccum[SLOTBITS_IN_LONGS];
 
 	if (unlikely(!port))
 		return;
 
-	if (atomic_read(&port->dd->resumeflag) == true) {
+	if (test_bit(MTIP_DDF_RESUME_BIT, &port->dd->dd_flag)) {
 		mod_timer(&port->cmd_timer,
 			jiffies + msecs_to_jiffies(30000));
 		return;
 	}
+	/* clear the tag accumulator */
+	memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
 
 	for (tag = 0; tag < num_command_slots; tag++) {
 		/*
@@ -540,12 +590,10 @@
 			command = &port->commands[tag];
 			fis = (struct host_to_dev_fis *) command->command;
 
-			dev_warn(&port->dd->pdev->dev,
-				"Timeout for command tag %d\n", tag);
-
+			set_bit(tag, tagaccum);
 			cmdto_cnt++;
 			if (cmdto_cnt == 1)
-				set_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags);
+				set_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
 
 			/*
 			 * Clear the completed bit. This should prevent
@@ -578,15 +626,29 @@
 		}
 	}
 
-	if (cmdto_cnt) {
-		dev_warn(&port->dd->pdev->dev,
-			"%d commands timed out: restarting port",
-			cmdto_cnt);
+	if (cmdto_cnt && !test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
+		print_tags(port->dd, "timed out", tagaccum, cmdto_cnt);
+
 		mtip_restart_port(port);
-		clear_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags);
+		clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
 		wake_up_interruptible(&port->svc_wait);
 	}
 
+	if (port->ic_pause_timer) {
+		to  = port->ic_pause_timer + msecs_to_jiffies(1000);
+		if (time_after(jiffies, to)) {
+			if (!test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
+				port->ic_pause_timer = 0;
+				clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+				clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
+				clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
+				wake_up_interruptible(&port->svc_wait);
+			}
+
+
+		}
+	}
+
 	/* Restart the timer */
 	mod_timer(&port->cmd_timer,
 		jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
@@ -681,23 +743,18 @@
 	complete(waiting);
 }
 
-/*
- * Helper function for tag logging
- */
-static void print_tags(struct driver_data *dd,
-			char *msg,
-			unsigned long *tagbits)
+static void mtip_null_completion(struct mtip_port *port,
+			    int tag,
+			    void *data,
+			    int status)
 {
-	unsigned int tag, count = 0;
-
-	for (tag = 0; tag < (dd->slot_groups) * 32; tag++) {
-		if (test_bit(tag, tagbits))
-			count++;
-	}
-	if (count)
-		dev_info(&dd->pdev->dev, "%s [%i tags]\n", msg, count);
+	return;
 }
 
+static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
+				dma_addr_t buffer_dma, unsigned int sectors);
+static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
+						struct smart_attr *attrib);
 /*
  * Handle an error.
  *
@@ -708,12 +765,16 @@
  */
 static void mtip_handle_tfe(struct driver_data *dd)
 {
-	int group, tag, bit, reissue;
+	int group, tag, bit, reissue, rv;
 	struct mtip_port *port;
-	struct mtip_cmd  *command;
+	struct mtip_cmd  *cmd;
 	u32 completed;
 	struct host_to_dev_fis *fis;
 	unsigned long tagaccum[SLOTBITS_IN_LONGS];
+	unsigned int cmd_cnt = 0;
+	unsigned char *buf;
+	char *fail_reason = NULL;
+	int fail_all_ncq_write = 0, fail_all_ncq_cmds = 0;
 
 	dev_warn(&dd->pdev->dev, "Taskfile error\n");
 
@@ -722,8 +783,11 @@
 	/* Stop the timer to prevent command timeouts. */
 	del_timer(&port->cmd_timer);
 
+	/* clear the tag accumulator */
+	memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
+
 	/* Set eh_active */
-	set_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags);
+	set_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
 
 	/* Loop through all the groups */
 	for (group = 0; group < dd->slot_groups; group++) {
@@ -732,9 +796,6 @@
 		/* clear completed status register in the hardware.*/
 		writel(completed, port->completed[group]);
 
-		/* clear the tag accumulator */
-		memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
-
 		/* Process successfully completed commands */
 		for (bit = 0; bit < 32 && completed; bit++) {
 			if (!(completed & (1<<bit)))
@@ -745,13 +806,14 @@
 			if (tag == MTIP_TAG_INTERNAL)
 				continue;
 
-			command = &port->commands[tag];
-			if (likely(command->comp_func)) {
+			cmd = &port->commands[tag];
+			if (likely(cmd->comp_func)) {
 				set_bit(tag, tagaccum);
-				atomic_set(&port->commands[tag].active, 0);
-				command->comp_func(port,
+				cmd_cnt++;
+				atomic_set(&cmd->active, 0);
+				cmd->comp_func(port,
 					 tag,
-					 command->comp_data,
+					 cmd->comp_data,
 					 0);
 			} else {
 				dev_err(&port->dd->pdev->dev,
@@ -765,12 +827,45 @@
 			}
 		}
 	}
-	print_tags(dd, "TFE tags completed:", tagaccum);
+
+	print_tags(dd, "completed (TFE)", tagaccum, cmd_cnt);
 
 	/* Restart the port */
 	mdelay(20);
 	mtip_restart_port(port);
 
+	/* Trying to determine the cause of the error */
+	rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ,
+				dd->port->log_buf,
+				dd->port->log_buf_dma, 1);
+	if (rv) {
+		dev_warn(&dd->pdev->dev,
+			"Error in READ LOG EXT (10h) command\n");
+		/* non-critical error, don't fail the load */
+	} else {
+		buf = (unsigned char *)dd->port->log_buf;
+		if (buf[259] & 0x1) {
+			dev_info(&dd->pdev->dev,
+				"Write protect bit is set.\n");
+			set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag);
+			fail_all_ncq_write = 1;
+			fail_reason = "write protect";
+		}
+		if (buf[288] == 0xF7) {
+			dev_info(&dd->pdev->dev,
+				"Exceeded Tmax, drive in thermal shutdown.\n");
+			set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag);
+			fail_all_ncq_cmds = 1;
+			fail_reason = "thermal shutdown";
+		}
+		if (buf[288] == 0xBF) {
+			dev_info(&dd->pdev->dev,
+				"Drive indicates rebuild has failed.\n");
+			fail_all_ncq_cmds = 1;
+			fail_reason = "rebuild failed";
+		}
+	}
+
 	/* clear the tag accumulator */
 	memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
 
@@ -779,32 +874,47 @@
 		for (bit = 0; bit < 32; bit++) {
 			reissue = 1;
 			tag = (group << 5) + bit;
+			cmd = &port->commands[tag];
 
 			/* If the active bit is set re-issue the command */
-			if (atomic_read(&port->commands[tag].active) == 0)
+			if (atomic_read(&cmd->active) == 0)
 				continue;
 
-			fis = (struct host_to_dev_fis *)
-				port->commands[tag].command;
+			fis = (struct host_to_dev_fis *)cmd->command;
 
 			/* Should re-issue? */
 			if (tag == MTIP_TAG_INTERNAL ||
 			    fis->command == ATA_CMD_SET_FEATURES)
 				reissue = 0;
+			else {
+				if (fail_all_ncq_cmds ||
+					(fail_all_ncq_write &&
+					fis->command == ATA_CMD_FPDMA_WRITE)) {
+					dev_warn(&dd->pdev->dev,
+					"  Fail: %s w/tag %d [%s].\n",
+					fis->command == ATA_CMD_FPDMA_WRITE ?
+						"write" : "read",
+					tag,
+					fail_reason != NULL ?
+						fail_reason : "unknown");
+					atomic_set(&cmd->active, 0);
+					if (cmd->comp_func) {
+						cmd->comp_func(port, tag,
+							cmd->comp_data,
+							-ENODATA);
+					}
+					continue;
+				}
+			}
 
 			/*
 			 * First check if this command has
 			 *  exceeded its retries.
 			 */
-			if (reissue &&
-			    (port->commands[tag].retries-- > 0)) {
+			if (reissue && (cmd->retries-- > 0)) {
 
 				set_bit(tag, tagaccum);
 
-				/* Update the timeout value. */
-				port->commands[tag].comp_time =
-					jiffies + msecs_to_jiffies(
-					MTIP_NCQ_COMMAND_TIMEOUT_MS);
 				/* Re-issue the command. */
 				mtip_issue_ncq_command(port, tag);
 
@@ -814,13 +924,13 @@
 			/* Retire a command that will not be reissued */
 			dev_warn(&port->dd->pdev->dev,
 				"retiring tag %d\n", tag);
-			atomic_set(&port->commands[tag].active, 0);
+			atomic_set(&cmd->active, 0);
 
-			if (port->commands[tag].comp_func)
-				port->commands[tag].comp_func(
+			if (cmd->comp_func)
+				cmd->comp_func(
 					port,
 					tag,
-					port->commands[tag].comp_data,
+					cmd->comp_data,
 					PORT_IRQ_TF_ERR);
 			else
 				dev_warn(&port->dd->pdev->dev,
@@ -828,10 +938,10 @@
 					tag);
 		}
 	}
-	print_tags(dd, "TFE tags reissued:", tagaccum);
+	print_tags(dd, "reissued (TFE)", tagaccum, cmd_cnt);
 
 	/* clear eh_active */
-	clear_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags);
+	clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
 	wake_up_interruptible(&port->svc_wait);
 
 	mod_timer(&port->cmd_timer,
@@ -899,7 +1009,7 @@
 	struct mtip_port *port = dd->port;
 	struct mtip_cmd *cmd = &port->commands[MTIP_TAG_INTERNAL];
 
-	if (test_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags) &&
+	if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) &&
 	    (cmd != NULL) && !(readl(port->cmd_issue[MTIP_TAG_INTERNAL])
 		& (1 << MTIP_TAG_INTERNAL))) {
 		if (cmd->comp_func) {
@@ -911,8 +1021,6 @@
 		}
 	}
 
-	dev_warn(&dd->pdev->dev, "IRQ status 0x%x ignored.\n", port_stat);
-
 	return;
 }
 
@@ -968,6 +1076,9 @@
 				/* don't proceed further */
 				return IRQ_HANDLED;
 			}
+			if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+							&dd->dd_flag))
+				return rv;
 
 			mtip_process_errors(dd, port_stat & PORT_IRQ_ERR);
 		}
@@ -1015,6 +1126,39 @@
 		port->cmd_issue[MTIP_TAG_INDEX(tag)]);
 }
 
+static bool mtip_pause_ncq(struct mtip_port *port,
+				struct host_to_dev_fis *fis)
+{
+	struct host_to_dev_fis *reply;
+	unsigned long task_file_data;
+
+	reply = port->rxfis + RX_FIS_D2H_REG;
+	task_file_data = readl(port->mmio+PORT_TFDATA);
+
+	if ((task_file_data & 1) || (fis->command == ATA_CMD_SEC_ERASE_UNIT))
+		return false;
+
+	if (fis->command == ATA_CMD_SEC_ERASE_PREP) {
+		set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+		port->ic_pause_timer = jiffies;
+		return true;
+	} else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) &&
+					(fis->features == 0x03)) {
+		set_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
+		port->ic_pause_timer = jiffies;
+		return true;
+	} else if ((fis->command == ATA_CMD_SEC_ERASE_UNIT) ||
+		((fis->command == 0xFC) &&
+			(fis->features == 0x27 || fis->features == 0x72 ||
+			 fis->features == 0x62 || fis->features == 0x26))) {
+		/* Com reset after secure erase or lowlevel format */
+		mtip_restart_port(port);
+		return false;
+	}
+
+	return false;
+}
+
 /*
  * Wait for port to quiesce
  *
@@ -1033,11 +1177,13 @@
 
 	to = jiffies + msecs_to_jiffies(timeout);
 	do {
-		if (test_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags) &&
-			test_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags)) {
+		if (test_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags) &&
+			test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) {
 			msleep(20);
 			continue; /* svc thd is actively issuing commands */
 		}
+		if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+			return -EFAULT;
 		/*
 		 * Ignore s_active bit 0 of array element 0.
 		 * This bit will always be set
@@ -1074,7 +1220,7 @@
  *	-EAGAIN  Time out waiting for command to complete.
  */
 static int mtip_exec_internal_command(struct mtip_port *port,
-					void *fis,
+					struct host_to_dev_fis *fis,
 					int fis_len,
 					dma_addr_t buffer,
 					int buf_len,
@@ -1084,8 +1230,9 @@
 {
 	struct mtip_cmd_sg *command_sg;
 	DECLARE_COMPLETION_ONSTACK(wait);
-	int rv = 0;
+	int rv = 0, ready2go = 1;
 	struct mtip_cmd *int_cmd = &port->commands[MTIP_TAG_INTERNAL];
+	unsigned long to;
 
 	/* Make sure the buffer is 8 byte aligned. This is asic specific. */
 	if (buffer & 0x00000007) {
@@ -1094,23 +1241,38 @@
 		return -EFAULT;
 	}
 
-	/* Only one internal command should be running at a time */
-	if (test_and_set_bit(MTIP_TAG_INTERNAL, port->allocated)) {
+	to = jiffies + msecs_to_jiffies(timeout);
+	do {
+		ready2go = !test_and_set_bit(MTIP_TAG_INTERNAL,
+						port->allocated);
+		if (ready2go)
+			break;
+		mdelay(100);
+	} while (time_before(jiffies, to));
+	if (!ready2go) {
 		dev_warn(&port->dd->pdev->dev,
-			"Internal command already active\n");
+			"Internal cmd active. new cmd [%02X]\n", fis->command);
 		return -EBUSY;
 	}
-	set_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags);
+	set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
+	port->ic_pause_timer = 0;
+
+	if (fis->command == ATA_CMD_SEC_ERASE_UNIT)
+		clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+	else if (fis->command == ATA_CMD_DOWNLOAD_MICRO)
+		clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
 
 	if (atomic == GFP_KERNEL) {
-		/* wait for io to complete if non atomic */
-		if (mtip_quiesce_io(port, 5000) < 0) {
-			dev_warn(&port->dd->pdev->dev,
-				"Failed to quiesce IO\n");
-			release_slot(port, MTIP_TAG_INTERNAL);
-			clear_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags);
-			wake_up_interruptible(&port->svc_wait);
-			return -EBUSY;
+		if (fis->command != ATA_CMD_STANDBYNOW1) {
+			/* wait for io to complete if non atomic */
+			if (mtip_quiesce_io(port, 5000) < 0) {
+				dev_warn(&port->dd->pdev->dev,
+					"Failed to quiesce IO\n");
+				release_slot(port, MTIP_TAG_INTERNAL);
+				clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
+				wake_up_interruptible(&port->svc_wait);
+				return -EBUSY;
+			}
 		}
 
 		/* Set the completion function and data for the command. */
@@ -1120,7 +1282,7 @@
 	} else {
 		/* Clear completion - we're going to poll */
 		int_cmd->comp_data = NULL;
-		int_cmd->comp_func = NULL;
+		int_cmd->comp_func = mtip_null_completion;
 	}
 
 	/* Copy the command to the command table */
@@ -1159,6 +1321,12 @@
 				"Internal command did not complete [%d] "
 				"within timeout of  %lu ms\n",
 				atomic, timeout);
+			if (mtip_check_surprise_removal(port->dd->pdev) ||
+				test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+						&port->dd->dd_flag)) {
+				rv = -ENXIO;
+				goto exec_ic_exit;
+			}
 			rv = -EAGAIN;
 		}
 
@@ -1166,31 +1334,59 @@
 			& (1 << MTIP_TAG_INTERNAL)) {
 			dev_warn(&port->dd->pdev->dev,
 				"Retiring internal command but CI is 1.\n");
+			if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+						&port->dd->dd_flag)) {
+				hba_reset_nosleep(port->dd);
+				rv = -ENXIO;
+			} else {
+				mtip_restart_port(port);
+				rv = -EAGAIN;
+			}
+			goto exec_ic_exit;
 		}
 
 	} else {
 		/* Spin for <timeout> checking if command still outstanding */
 		timeout = jiffies + msecs_to_jiffies(timeout);
-
-		while ((readl(
-			port->cmd_issue[MTIP_TAG_INTERNAL])
-			& (1 << MTIP_TAG_INTERNAL))
-			&& time_before(jiffies, timeout))
-			;
+		while ((readl(port->cmd_issue[MTIP_TAG_INTERNAL])
+				& (1 << MTIP_TAG_INTERNAL))
+				&& time_before(jiffies, timeout)) {
+			if (mtip_check_surprise_removal(port->dd->pdev)) {
+				rv = -ENXIO;
+				goto exec_ic_exit;
+			}
+			if ((fis->command != ATA_CMD_STANDBYNOW1) &&
+				test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+						&port->dd->dd_flag)) {
+				rv = -ENXIO;
+				goto exec_ic_exit;
+			}
+		}
 
 		if (readl(port->cmd_issue[MTIP_TAG_INTERNAL])
 			& (1 << MTIP_TAG_INTERNAL)) {
 			dev_err(&port->dd->pdev->dev,
-				"Internal command did not complete [%d]\n",
-				atomic);
+				"Internal command did not complete [atomic]\n");
 			rv = -EAGAIN;
+			if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+						&port->dd->dd_flag)) {
+				hba_reset_nosleep(port->dd);
+				rv = -ENXIO;
+			} else {
+				mtip_restart_port(port);
+				rv = -EAGAIN;
+			}
 		}
 	}
-
+exec_ic_exit:
 	/* Clear the allocated and active bits for the internal command. */
 	atomic_set(&int_cmd->active, 0);
 	release_slot(port, MTIP_TAG_INTERNAL);
-	clear_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags);
+	if (rv >= 0 && mtip_pause_ncq(port, fis)) {
+		/* NCQ paused */
+		return rv;
+	}
+	clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
 	wake_up_interruptible(&port->svc_wait);
 
 	return rv;
@@ -1240,6 +1436,9 @@
 	int rv = 0;
 	struct host_to_dev_fis fis;
 
+	if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+		return -EFAULT;
+
 	/* Build the FIS. */
 	memset(&fis, 0, sizeof(struct host_to_dev_fis));
 	fis.type	= 0x27;
@@ -1313,6 +1512,7 @@
 {
 	int rv;
 	struct host_to_dev_fis	fis;
+	unsigned long start;
 
 	/* Build the FIS. */
 	memset(&fis, 0, sizeof(struct host_to_dev_fis));
@@ -1320,15 +1520,150 @@
 	fis.opts	= 1 << 7;
 	fis.command	= ATA_CMD_STANDBYNOW1;
 
-	/* Execute the command.  Use a 15-second timeout for large drives. */
+	start = jiffies;
 	rv = mtip_exec_internal_command(port,
 					&fis,
 					5,
 					0,
 					0,
 					0,
-					GFP_KERNEL,
+					GFP_ATOMIC,
 					15000);
+	dbg_printk(MTIP_DRV_NAME "Time taken to complete standby cmd: %d ms\n",
+			jiffies_to_msecs(jiffies - start));
+	if (rv)
+		dev_warn(&port->dd->pdev->dev,
+			"STANDBY IMMEDIATE command failed.\n");
+
+	return rv;
+}
+
+/*
+ * Issue a READ LOG EXT command to the device.
+ *
+ * @port	pointer to the port structure.
+ * @page	page number to fetch
+ * @buffer	pointer to buffer
+ * @buffer_dma	dma address corresponding to @buffer
+ * @sectors	page length to fetch, in sectors
+ *
+ * return value
+ *	@rv	return value from mtip_exec_internal_command()
+ */
+static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
+				dma_addr_t buffer_dma, unsigned int sectors)
+{
+	struct host_to_dev_fis fis;
+
+	memset(&fis, 0, sizeof(struct host_to_dev_fis));
+	fis.type	= 0x27;
+	fis.opts	= 1 << 7;
+	fis.command	= ATA_CMD_READ_LOG_EXT;
+	fis.sect_count	= sectors & 0xFF;
+	fis.sect_cnt_ex	= (sectors >> 8) & 0xFF;
+	fis.lba_low	= page;
+	fis.lba_mid	= 0;
+	fis.device	= ATA_DEVICE_OBS;
+
+	memset(buffer, 0, sectors * ATA_SECT_SIZE);
+
+	return mtip_exec_internal_command(port,
+					&fis,
+					5,
+					buffer_dma,
+					sectors * ATA_SECT_SIZE,
+					0,
+					GFP_ATOMIC,
+					MTIP_INTERNAL_COMMAND_TIMEOUT_MS);
+}
+
+/*
+ * Issue a SMART READ DATA command to the device.
+ *
+ * @port	pointer to the port structure.
+ * @buffer	pointer to buffer
+ * @buffer_dma	dma address corresponding to @buffer
+ *
+ * return value
+ *	@rv	return value from mtip_exec_internal_command()
+ */
+static int mtip_get_smart_data(struct mtip_port *port, u8 *buffer,
+					dma_addr_t buffer_dma)
+{
+	struct host_to_dev_fis fis;
+
+	memset(&fis, 0, sizeof(struct host_to_dev_fis));
+	fis.type	= 0x27;
+	fis.opts	= 1 << 7;
+	fis.command	= ATA_CMD_SMART;
+	fis.features	= 0xD0;
+	fis.sect_count	= 1;
+	fis.lba_mid	= 0x4F;
+	fis.lba_hi	= 0xC2;
+	fis.device	= ATA_DEVICE_OBS;
+
+	return mtip_exec_internal_command(port,
+					&fis,
+					5,
+					buffer_dma,
+					ATA_SECT_SIZE,
+					0,
+					GFP_ATOMIC,
+					15000);
+}
+
+/*
+ * Get the value of a smart attribute
+ *
+ * @port	pointer to the port structure
+ * @id		attribute number
+ * @attrib	pointer to return attrib information corresponding to @id
+ *
+ * return value
+ *	-EINVAL	NULL buffer passed or unsupported attribute @id.
+ *	-EPERM	Identify data not valid, SMART not supported or not enabled
+ */
+static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
+						struct smart_attr *attrib)
+{
+	int rv, i;
+	struct smart_attr *pattr;
+
+	if (!attrib)
+		return -EINVAL;
+
+	if (!port->identify_valid) {
+		dev_warn(&port->dd->pdev->dev, "IDENTIFY DATA not valid\n");
+		return -EPERM;
+	}
+	if (!(port->identify[82] & 0x1)) {
+		dev_warn(&port->dd->pdev->dev, "SMART not supported\n");
+		return -EPERM;
+	}
+	if (!(port->identify[85] & 0x1)) {
+		dev_warn(&port->dd->pdev->dev, "SMART not enabled\n");
+		return -EPERM;
+	}
+
+	memset(port->smart_buf, 0, ATA_SECT_SIZE);
+	rv = mtip_get_smart_data(port, port->smart_buf, port->smart_buf_dma);
+	if (rv) {
+		dev_warn(&port->dd->pdev->dev, "Failed to ge SMART data\n");
+		return rv;
+	}
+
+	pattr = (struct smart_attr *)(port->smart_buf + 2);
+	for (i = 0; i < 29; i++, pattr++)
+		if (pattr->attr_id == id) {
+			memcpy(attrib, pattr, sizeof(struct smart_attr));
+			break;
+		}
+
+	if (i == 29) {
+		dev_warn(&port->dd->pdev->dev,
+			"Query for invalid SMART attribute ID\n");
+		rv = -EINVAL;
+	}
 
 	return rv;
 }
@@ -1504,10 +1839,7 @@
 	fis.cyl_hi	= command[5];
 	fis.device	= command[6] & ~0x10; /* Clear the dev bit*/
 
-
-	dbg_printk(MTIP_DRV_NAME "%s: User Command: cmd %x, feat %x, "
-		"nsect %x, sect %x, lcyl %x, "
-		"hcyl %x, sel %x\n",
+	dbg_printk(MTIP_DRV_NAME " %s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n",
 		__func__,
 		command[0],
 		command[1],
@@ -1534,8 +1866,7 @@
 	command[4] = reply->cyl_low;
 	command[5] = reply->cyl_hi;
 
-	dbg_printk(MTIP_DRV_NAME "%s: Completion Status: stat %x, "
-		"err %x , cyl_lo %x cyl_hi %x\n",
+	dbg_printk(MTIP_DRV_NAME " %s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n",
 		__func__,
 		command[0],
 		command[1],
@@ -1578,7 +1909,7 @@
 	}
 
 	dbg_printk(MTIP_DRV_NAME
-		"%s: User Command: cmd %x, sect %x, "
+		" %s: User Command: cmd %x, sect %x, "
 		"feat %x, sectcnt %x\n",
 		__func__,
 		command[0],
@@ -1607,7 +1938,7 @@
 	command[2] = command[3];
 
 	dbg_printk(MTIP_DRV_NAME
-		"%s: Completion Status: stat %x, "
+		" %s: Completion Status: stat %x, "
 		"err %x, cmd %x\n",
 		__func__,
 		command[0],
@@ -1810,9 +2141,10 @@
 	}
 
 	dbg_printk(MTIP_DRV_NAME
-		"taskfile: cmd %x, feat %x, nsect %x,"
+		" %s: cmd %x, feat %x, nsect %x,"
 		" sect/lbal %x, lcyl/lbam %x, hcyl/lbah %x,"
 		" head/dev %x\n",
+		__func__,
 		fis.command,
 		fis.features,
 		fis.sect_count,
@@ -1823,8 +2155,8 @@
 
 	switch (fis.command) {
 	case ATA_CMD_DOWNLOAD_MICRO:
-		/* Change timeout for Download Microcode to 60 seconds.*/
-		timeout = 60000;
+		/* Change timeout for Download Microcode to 2 minutes */
+		timeout = 120000;
 		break;
 	case ATA_CMD_SEC_ERASE_UNIT:
 		/* Change timeout for Security Erase Unit to 4 minutes.*/
@@ -1840,8 +2172,8 @@
 		timeout = 10000;
 		break;
 	case ATA_CMD_SMART:
-		/* Change timeout for vendor unique command to 10 secs */
-		timeout = 10000;
+		/* Change timeout for vendor unique command to 15 secs */
+		timeout = 15000;
 		break;
 	default:
 		timeout = MTIP_IOCTL_COMMAND_TIMEOUT_MS;
@@ -1903,18 +2235,8 @@
 		req_task->hob_ports[1] = reply->features_ex;
 		req_task->hob_ports[2] = reply->sect_cnt_ex;
 	}
-
-	/* Com rest after secure erase or lowlevel format */
-	if (((fis.command == ATA_CMD_SEC_ERASE_UNIT) ||
-		((fis.command == 0xFC) &&
-			(fis.features == 0x27 || fis.features == 0x72 ||
-			 fis.features == 0x62 || fis.features == 0x26))) &&
-			 !(reply->command & 1)) {
-		mtip_restart_port(dd->port);
-	}
-
 	dbg_printk(MTIP_DRV_NAME
-		"%s: Completion: stat %x,"
+		" %s: Completion: stat %x,"
 		"err %x, sect_cnt %x, lbalo %x,"
 		"lbamid %x, lbahi %x, dev %x\n",
 		__func__,
@@ -2080,14 +2402,10 @@
 	struct host_to_dev_fis	*fis;
 	struct mtip_port *port = dd->port;
 	struct mtip_cmd *command = &port->commands[tag];
+	int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 
 	/* Map the scatter list for DMA access */
-	if (dir == READ)
-		nents = dma_map_sg(&dd->pdev->dev, command->sg,
-					nents, DMA_FROM_DEVICE);
-	else
-		nents = dma_map_sg(&dd->pdev->dev, command->sg,
-					nents, DMA_TO_DEVICE);
+	nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir);
 
 	command->scatter_ents = nents;
 
@@ -2127,7 +2445,7 @@
 	 */
 	command->comp_data = dd;
 	command->comp_func = mtip_async_complete;
-	command->direction = (dir == READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+	command->direction = dma_dir;
 
 	/*
 	 * Set the completion function and data for the command passed
@@ -2140,19 +2458,16 @@
 	 * To prevent this command from being issued
 	 * if an internal command is in progress or error handling is active.
 	 */
-	if (unlikely(test_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags) ||
-			test_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags))) {
+	if (port->flags & MTIP_PF_PAUSE_IO) {
 		set_bit(tag, port->cmds_to_issue);
-		set_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags);
+		set_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags);
 		return;
 	}
 
 	/* Issue the command to the hardware */
 	mtip_issue_ncq_command(port, tag);
 
-	/* Set the command's timeout value.*/
-	port->commands[tag].comp_time = jiffies + msecs_to_jiffies(
-					MTIP_NCQ_COMMAND_TIMEOUT_MS);
+	return;
 }
 
 /*
@@ -2191,8 +2506,14 @@
 	down(&dd->port->cmd_slot);
 	*tag = get_slot(dd->port);
 
-	if (unlikely(*tag < 0))
+	if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) {
+		up(&dd->port->cmd_slot);
 		return NULL;
+	}
+	if (unlikely(*tag < 0)) {
+		up(&dd->port->cmd_slot);
+		return NULL;
+	}
 
 	return dd->port->commands[*tag].sg;
 }
@@ -2207,7 +2528,7 @@
  * return value
  *	The size, in bytes, of the data copied into buf.
  */
-static ssize_t hw_show_registers(struct device *dev,
+static ssize_t mtip_hw_show_registers(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
@@ -2216,7 +2537,7 @@
 	int size = 0;
 	int n;
 
-	size += sprintf(&buf[size], "%s:\ns_active:\n", __func__);
+	size += sprintf(&buf[size], "S ACTive:\n");
 
 	for (n = 0; n < dd->slot_groups; n++)
 		size += sprintf(&buf[size], "0x%08x\n",
@@ -2240,20 +2561,39 @@
 				 group_allocated);
 	}
 
-	size += sprintf(&buf[size], "completed:\n");
+	size += sprintf(&buf[size], "Completed:\n");
 
 	for (n = 0; n < dd->slot_groups; n++)
 		size += sprintf(&buf[size], "0x%08x\n",
 				readl(dd->port->completed[n]));
 
-	size += sprintf(&buf[size], "PORT_IRQ_STAT 0x%08x\n",
+	size += sprintf(&buf[size], "PORT IRQ STAT : 0x%08x\n",
 				readl(dd->port->mmio + PORT_IRQ_STAT));
-	size += sprintf(&buf[size], "HOST_IRQ_STAT 0x%08x\n",
+	size += sprintf(&buf[size], "HOST IRQ STAT : 0x%08x\n",
 				readl(dd->mmio + HOST_IRQ_STAT));
 
 	return size;
 }
-static DEVICE_ATTR(registers, S_IRUGO, hw_show_registers, NULL);
+
+static ssize_t mtip_hw_show_status(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct driver_data *dd = dev_to_disk(dev)->private_data;
+	int size = 0;
+
+	if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))
+		size += sprintf(buf, "%s", "thermal_shutdown\n");
+	else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag))
+		size += sprintf(buf, "%s", "write_protect\n");
+	else
+		size += sprintf(buf, "%s", "online\n");
+
+	return size;
+}
+
+static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL);
+static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
 
 /*
  * Create the sysfs related attributes.
@@ -2272,7 +2612,10 @@
 
 	if (sysfs_create_file(kobj, &dev_attr_registers.attr))
 		dev_warn(&dd->pdev->dev,
-			"Error creating registers sysfs entry\n");
+			"Error creating 'registers' sysfs entry\n");
+	if (sysfs_create_file(kobj, &dev_attr_status.attr))
+		dev_warn(&dd->pdev->dev,
+			"Error creating 'status' sysfs entry\n");
 	return 0;
 }
 
@@ -2292,6 +2635,7 @@
 		return -EINVAL;
 
 	sysfs_remove_file(kobj, &dev_attr_registers.attr);
+	sysfs_remove_file(kobj, &dev_attr_status.attr);
 
 	return 0;
 }
@@ -2384,10 +2728,12 @@
 		"FTL rebuild in progress. Polling for completion.\n");
 
 	start = jiffies;
-	dd->ftlrebuildflag = 1;
 	timeout = jiffies + msecs_to_jiffies(MTIP_FTL_REBUILD_TIMEOUT_MS);
 
 	do {
+		if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+				&dd->dd_flag)))
+			return -EFAULT;
 		if (mtip_check_surprise_removal(dd->pdev))
 			return -EFAULT;
 
@@ -2408,22 +2754,17 @@
 			dev_warn(&dd->pdev->dev,
 				"FTL rebuild complete (%d secs).\n",
 			jiffies_to_msecs(jiffies - start) / 1000);
-			dd->ftlrebuildflag = 0;
 			mtip_block_initialize(dd);
-			break;
+			return 0;
 		}
 		ssleep(10);
 	} while (time_before(jiffies, timeout));
 
 	/* Check for timeout */
-	if (dd->ftlrebuildflag) {
-		dev_err(&dd->pdev->dev,
+	dev_err(&dd->pdev->dev,
 		"Timed out waiting for FTL rebuild to complete (%d secs).\n",
 		jiffies_to_msecs(jiffies - start) / 1000);
-		return -EFAULT;
-	}
-
-	return 0;
+	return -EFAULT;
 }
 
 /*
@@ -2448,14 +2789,17 @@
 		 * is in progress nor error handling is active
 		 */
 		wait_event_interruptible(port->svc_wait, (port->flags) &&
-			!test_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags) &&
-			!test_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags));
+			!(port->flags & MTIP_PF_PAUSE_IO));
 
 		if (kthread_should_stop())
 			break;
 
-		set_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags);
-		if (test_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags)) {
+		if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+				&dd->dd_flag)))
+			break;
+
+		set_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags);
+		if (test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) {
 			slot = 1;
 			/* used to restrict the loop to one iteration */
 			slot_start = num_cmd_slots;
@@ -2480,21 +2824,19 @@
 				/* Issue the command to the hardware */
 				mtip_issue_ncq_command(port, slot);
 
-				/* Set the command's timeout value.*/
-				port->commands[slot].comp_time = jiffies +
-				msecs_to_jiffies(MTIP_NCQ_COMMAND_TIMEOUT_MS);
-
 				clear_bit(slot, port->cmds_to_issue);
 			}
 
-			clear_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags);
-		} else if (test_bit(MTIP_FLAG_REBUILD_BIT, &port->flags)) {
-			mtip_ftl_rebuild_poll(dd);
-			clear_bit(MTIP_FLAG_REBUILD_BIT, &port->flags);
+			clear_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags);
+		} else if (test_bit(MTIP_PF_REBUILD_BIT, &port->flags)) {
+			if (!mtip_ftl_rebuild_poll(dd))
+				set_bit(MTIP_DDF_REBUILD_FAILED_BIT,
+							&dd->dd_flag);
+			clear_bit(MTIP_PF_REBUILD_BIT, &port->flags);
 		}
-		clear_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags);
+		clear_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags);
 
-		if (test_bit(MTIP_FLAG_SVC_THD_SHOULD_STOP_BIT, &port->flags))
+		if (test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags))
 			break;
 	}
 	return 0;
@@ -2513,6 +2855,9 @@
 	int i;
 	int rv;
 	unsigned int num_command_slots;
+	unsigned long timeout, timetaken;
+	unsigned char *buf;
+	struct smart_attr attr242;
 
 	dd->mmio = pcim_iomap_table(dd->pdev)[MTIP_ABAR];
 
@@ -2547,7 +2892,7 @@
 	/* Allocate memory for the command list. */
 	dd->port->command_list =
 		dmam_alloc_coherent(&dd->pdev->dev,
-			HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2),
+			HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
 			&dd->port->command_list_dma,
 			GFP_KERNEL);
 	if (!dd->port->command_list) {
@@ -2560,7 +2905,7 @@
 	/* Clear the memory we have allocated. */
 	memset(dd->port->command_list,
 		0,
-		HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2));
+		HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4));
 
 	/* Setup the addresse of the RX FIS. */
 	dd->port->rxfis	    = dd->port->command_list + HW_CMD_SLOT_SZ;
@@ -2576,10 +2921,19 @@
 	dd->port->identify_dma = dd->port->command_tbl_dma +
 					HW_CMD_TBL_AR_SZ;
 
-	/* Setup the address of the sector buffer. */
+	/* Setup the address of the sector buffer - for some non-ncq cmds */
 	dd->port->sector_buffer	= (void *) dd->port->identify + ATA_SECT_SIZE;
 	dd->port->sector_buffer_dma = dd->port->identify_dma + ATA_SECT_SIZE;
 
+	/* Setup the address of the log buf - for read log command */
+	dd->port->log_buf = (void *)dd->port->sector_buffer  + ATA_SECT_SIZE;
+	dd->port->log_buf_dma = dd->port->sector_buffer_dma + ATA_SECT_SIZE;
+
+	/* Setup the address of the smart buf - for smart read data command */
+	dd->port->smart_buf = (void *)dd->port->log_buf  + ATA_SECT_SIZE;
+	dd->port->smart_buf_dma = dd->port->log_buf_dma + ATA_SECT_SIZE;
+
+
 	/* Point the command headers at the command tables. */
 	for (i = 0; i < num_command_slots; i++) {
 		dd->port->commands[i].command_header =
@@ -2623,14 +2977,43 @@
 			dd->port->mmio + i*0x80 + PORT_SDBV;
 	}
 
-	/* Reset the HBA. */
-	if (mtip_hba_reset(dd) < 0) {
-		dev_err(&dd->pdev->dev,
-			"Card did not reset within timeout\n");
-		rv = -EIO;
+	timetaken = jiffies;
+	timeout = jiffies + msecs_to_jiffies(30000);
+	while (((readl(dd->port->mmio + PORT_SCR_STAT) & 0x0F) != 0x03) &&
+		 time_before(jiffies, timeout)) {
+		mdelay(100);
+	}
+	if (unlikely(mtip_check_surprise_removal(dd->pdev))) {
+		timetaken = jiffies - timetaken;
+		dev_warn(&dd->pdev->dev,
+			"Surprise removal detected at %u ms\n",
+			jiffies_to_msecs(timetaken));
+		rv = -ENODEV;
+		goto out2 ;
+	}
+	if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) {
+		timetaken = jiffies - timetaken;
+		dev_warn(&dd->pdev->dev,
+			"Removal detected at %u ms\n",
+			jiffies_to_msecs(timetaken));
+		rv = -EFAULT;
 		goto out2;
 	}
 
+	/* Conditionally reset the HBA. */
+	if (!(readl(dd->mmio + HOST_CAP) & HOST_CAP_NZDMA)) {
+		if (mtip_hba_reset(dd) < 0) {
+			dev_err(&dd->pdev->dev,
+				"Card did not reset within timeout\n");
+			rv = -EIO;
+			goto out2;
+		}
+	} else {
+		/* Clear any pending interrupts on the HBA */
+		writel(readl(dd->mmio + HOST_IRQ_STAT),
+			dd->mmio + HOST_IRQ_STAT);
+	}
+
 	mtip_init_port(dd->port);
 	mtip_start_port(dd->port);
 
@@ -2660,6 +3043,12 @@
 	mod_timer(&dd->port->cmd_timer,
 		jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
 
+
+	if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) {
+		rv = -EFAULT;
+		goto out3;
+	}
+
 	if (mtip_get_identify(dd->port, NULL) < 0) {
 		rv = -EFAULT;
 		goto out3;
@@ -2667,10 +3056,47 @@
 
 	if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) ==
 		MTIP_FTL_REBUILD_MAGIC) {
-		set_bit(MTIP_FLAG_REBUILD_BIT, &dd->port->flags);
+		set_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags);
 		return MTIP_FTL_REBUILD_MAGIC;
 	}
 	mtip_dump_identify(dd->port);
+
+	/* check write protect, over temp and rebuild statuses */
+	rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ,
+				dd->port->log_buf,
+				dd->port->log_buf_dma, 1);
+	if (rv) {
+		dev_warn(&dd->pdev->dev,
+			"Error in READ LOG EXT (10h) command\n");
+		/* non-critical error, don't fail the load */
+	} else {
+		buf = (unsigned char *)dd->port->log_buf;
+		if (buf[259] & 0x1) {
+			dev_info(&dd->pdev->dev,
+				"Write protect bit is set.\n");
+			set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag);
+		}
+		if (buf[288] == 0xF7) {
+			dev_info(&dd->pdev->dev,
+				"Exceeded Tmax, drive in thermal shutdown.\n");
+			set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag);
+		}
+		if (buf[288] == 0xBF) {
+			dev_info(&dd->pdev->dev,
+				"Drive indicates rebuild has failed.\n");
+			/* TODO */
+		}
+	}
+
+	/* get write protect progess */
+	memset(&attr242, 0, sizeof(struct smart_attr));
+	if (mtip_get_smart_attr(dd->port, 242, &attr242))
+		dev_warn(&dd->pdev->dev,
+				"Unable to check write protect progress\n");
+	else
+		dev_info(&dd->pdev->dev,
+				"Write protect progress: %d%% (%d blocks)\n",
+				attr242.cur, attr242.data);
 	return rv;
 
 out3:
@@ -2688,7 +3114,7 @@
 
 	/* Free the command/command header memory. */
 	dmam_free_coherent(&dd->pdev->dev,
-				HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2),
+				HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
 				dd->port->command_list,
 				dd->port->command_list_dma);
 out1:
@@ -2712,9 +3138,12 @@
 	 * Send standby immediate (E0h) to the drive so that it
 	 * saves its state.
 	 */
-	if (atomic_read(&dd->drv_cleanup_done) != true) {
+	if (!test_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag)) {
 
-		mtip_standby_immediate(dd->port);
+		if (!test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags))
+			if (mtip_standby_immediate(dd->port))
+				dev_warn(&dd->pdev->dev,
+					"STANDBY IMMEDIATE failed\n");
 
 		/* de-initialize the port. */
 		mtip_deinit_port(dd->port);
@@ -2734,7 +3163,7 @@
 
 	/* Free the command/command header memory. */
 	dmam_free_coherent(&dd->pdev->dev,
-			HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2),
+			HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
 			dd->port->command_list,
 			dd->port->command_list_dma);
 	/* Free the memory allocated for the for structure. */
@@ -2892,6 +3321,9 @@
 	if (!dd)
 		return -ENOTTY;
 
+	if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)))
+		return -ENOTTY;
+
 	switch (cmd) {
 	case BLKFLSBUF:
 		return -ENOTTY;
@@ -2927,6 +3359,9 @@
 	if (!dd)
 		return -ENOTTY;
 
+	if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)))
+		return -ENOTTY;
+
 	switch (cmd) {
 	case BLKFLSBUF:
 		return -ENOTTY;
@@ -3049,6 +3484,24 @@
 	int nents = 0;
 	int tag = 0;
 
+	if (unlikely(dd->dd_flag & MTIP_DDF_STOP_IO)) {
+		if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+							&dd->dd_flag))) {
+			bio_endio(bio, -ENXIO);
+			return;
+		}
+		if (unlikely(test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))) {
+			bio_endio(bio, -ENODATA);
+			return;
+		}
+		if (unlikely(test_bit(MTIP_DDF_WRITE_PROTECT_BIT,
+							&dd->dd_flag) &&
+				bio_data_dir(bio))) {
+			bio_endio(bio, -ENODATA);
+			return;
+		}
+	}
+
 	if (unlikely(!bio_has_data(bio))) {
 		blk_queue_flush(queue, 0);
 		bio_endio(bio, 0);
@@ -3061,7 +3514,7 @@
 
 		if (unlikely((bio)->bi_vcnt > MTIP_MAX_SG)) {
 			dev_warn(&dd->pdev->dev,
-				"Maximum number of SGL entries exceeded");
+				"Maximum number of SGL entries exceeded\n");
 			bio_io_error(bio);
 			mtip_hw_release_scatterlist(dd, tag);
 			return;
@@ -3210,8 +3663,10 @@
 		kobject_put(kobj);
 	}
 
-	if (dd->mtip_svc_handler)
+	if (dd->mtip_svc_handler) {
+		set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
 		return rv; /* service thread created for handling rebuild */
+	}
 
 start_service_thread:
 	sprintf(thd_name, "mtip_svc_thd_%02d", index);
@@ -3220,12 +3675,15 @@
 						dd, thd_name);
 
 	if (IS_ERR(dd->mtip_svc_handler)) {
-		printk(KERN_ERR "mtip32xx: service thread failed to start\n");
+		dev_err(&dd->pdev->dev, "service thread failed to start\n");
 		dd->mtip_svc_handler = NULL;
 		rv = -EFAULT;
 		goto kthread_run_error;
 	}
 
+	if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC)
+		rv = wait_for_rebuild;
+
 	return rv;
 
 kthread_run_error:
@@ -3266,16 +3724,18 @@
 	struct kobject *kobj;
 
 	if (dd->mtip_svc_handler) {
-		set_bit(MTIP_FLAG_SVC_THD_SHOULD_STOP_BIT, &dd->port->flags);
+		set_bit(MTIP_PF_SVC_THD_STOP_BIT, &dd->port->flags);
 		wake_up_interruptible(&dd->port->svc_wait);
 		kthread_stop(dd->mtip_svc_handler);
 	}
 
-	/* Clean up the sysfs attributes managed by the protocol layer. */
-	kobj = kobject_get(&disk_to_dev(dd->disk)->kobj);
-	if (kobj) {
-		mtip_hw_sysfs_exit(dd, kobj);
-		kobject_put(kobj);
+	/* Clean up the sysfs attributes, if created */
+	if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) {
+		kobj = kobject_get(&disk_to_dev(dd->disk)->kobj);
+		if (kobj) {
+			mtip_hw_sysfs_exit(dd, kobj);
+			kobject_put(kobj);
+		}
 	}
 
 	/*
@@ -3283,6 +3743,11 @@
 	 * from /dev
 	 */
 	del_gendisk(dd->disk);
+
+	spin_lock(&rssd_index_lock);
+	ida_remove(&rssd_index_ida, dd->index);
+	spin_unlock(&rssd_index_lock);
+
 	blk_cleanup_queue(dd->queue);
 	dd->disk  = NULL;
 	dd->queue = NULL;
@@ -3312,6 +3777,11 @@
 
 	/* Delete our gendisk structure, and cleanup the blk queue. */
 	del_gendisk(dd->disk);
+
+	spin_lock(&rssd_index_lock);
+	ida_remove(&rssd_index_ida, dd->index);
+	spin_unlock(&rssd_index_lock);
+
 	blk_cleanup_queue(dd->queue);
 	dd->disk  = NULL;
 	dd->queue = NULL;
@@ -3359,11 +3829,6 @@
 		return -ENOMEM;
 	}
 
-	/* Set the atomic variable as 1 in case of SRSI */
-	atomic_set(&dd->drv_cleanup_done, true);
-
-	atomic_set(&dd->resumeflag, false);
-
 	/* Attach the private data to this PCI device.  */
 	pci_set_drvdata(pdev, dd);
 
@@ -3420,7 +3885,8 @@
 	 * instance number.
 	 */
 	instance++;
-
+	if (rv != MTIP_FTL_REBUILD_MAGIC)
+		set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
 	goto done;
 
 block_initialize_err:
@@ -3434,9 +3900,6 @@
 	pci_set_drvdata(pdev, NULL);
 	return rv;
 done:
-	/* Set the atomic variable as 0 in case of SRSI */
-	atomic_set(&dd->drv_cleanup_done, true);
-
 	return rv;
 }
 
@@ -3452,8 +3915,10 @@
 	struct driver_data *dd = pci_get_drvdata(pdev);
 	int counter = 0;
 
+	set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag);
+
 	if (mtip_check_surprise_removal(pdev)) {
-		while (atomic_read(&dd->drv_cleanup_done) == false) {
+		while (!test_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag)) {
 			counter++;
 			msleep(20);
 			if (counter == 10) {
@@ -3463,8 +3928,6 @@
 			}
 		}
 	}
-	/* Set the atomic variable as 1 in case of SRSI */
-	atomic_set(&dd->drv_cleanup_done, true);
 
 	/* Clean up the block layer. */
 	mtip_block_remove(dd);
@@ -3493,7 +3956,7 @@
 		return -EFAULT;
 	}
 
-	atomic_set(&dd->resumeflag, true);
+	set_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag);
 
 	/* Disable ports & interrupts then send standby immediate */
 	rv = mtip_block_suspend(dd);
@@ -3559,7 +4022,7 @@
 		dev_err(&pdev->dev, "Unable to resume\n");
 
 err:
-	atomic_set(&dd->resumeflag, false);
+	clear_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag);
 
 	return rv;
 }
@@ -3608,18 +4071,25 @@
  */
 static int __init mtip_init(void)
 {
+	int error;
+
 	printk(KERN_INFO MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n");
 
 	/* Allocate a major block device number to use with this driver. */
-	mtip_major = register_blkdev(0, MTIP_DRV_NAME);
-	if (mtip_major < 0) {
+	error = register_blkdev(0, MTIP_DRV_NAME);
+	if (error <= 0) {
 		printk(KERN_ERR "Unable to register block device (%d)\n",
-		mtip_major);
+		error);
 		return -EBUSY;
 	}
+	mtip_major = error;
 
 	/* Register our PCI operations. */
-	return pci_register_driver(&mtip_pci_driver);
+	error = pci_register_driver(&mtip_pci_driver);
+	if (error)
+		unregister_blkdev(mtip_major, MTIP_DRV_NAME);
+
+	return error;
 }
 
 /*
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index e0554a8..4ef5833 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -34,8 +34,8 @@
 /* offset of Device Control register in PCIe extended capabilites space */
 #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET	0x48
 
-/* # of times to retry timed out IOs */
-#define MTIP_MAX_RETRIES	5
+/* # of times to retry timed out/failed IOs */
+#define MTIP_MAX_RETRIES	2
 
 /* Various timeout values in ms */
 #define MTIP_NCQ_COMMAND_TIMEOUT_MS       5000
@@ -114,12 +114,41 @@
 #define __force_bit2int (unsigned int __force)
 
 /* below are bit numbers in 'flags' defined in mtip_port */
-#define MTIP_FLAG_IC_ACTIVE_BIT			0
-#define MTIP_FLAG_EH_ACTIVE_BIT			1
-#define MTIP_FLAG_SVC_THD_ACTIVE_BIT		2
-#define MTIP_FLAG_ISSUE_CMDS_BIT		4
-#define MTIP_FLAG_REBUILD_BIT			5
-#define MTIP_FLAG_SVC_THD_SHOULD_STOP_BIT	8
+#define MTIP_PF_IC_ACTIVE_BIT		0 /* pio/ioctl */
+#define MTIP_PF_EH_ACTIVE_BIT		1 /* error handling */
+#define MTIP_PF_SE_ACTIVE_BIT		2 /* secure erase */
+#define MTIP_PF_DM_ACTIVE_BIT		3 /* download microcde */
+#define MTIP_PF_PAUSE_IO	((1 << MTIP_PF_IC_ACTIVE_BIT) | \
+				(1 << MTIP_PF_EH_ACTIVE_BIT) | \
+				(1 << MTIP_PF_SE_ACTIVE_BIT) | \
+				(1 << MTIP_PF_DM_ACTIVE_BIT))
+
+#define MTIP_PF_SVC_THD_ACTIVE_BIT	4
+#define MTIP_PF_ISSUE_CMDS_BIT		5
+#define MTIP_PF_REBUILD_BIT		6
+#define MTIP_PF_SVC_THD_STOP_BIT	8
+
+/* below are bit numbers in 'dd_flag' defined in driver_data */
+#define MTIP_DDF_REMOVE_PENDING_BIT	1
+#define MTIP_DDF_OVER_TEMP_BIT		2
+#define MTIP_DDF_WRITE_PROTECT_BIT	3
+#define MTIP_DDF_STOP_IO	((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \
+				(1 << MTIP_DDF_OVER_TEMP_BIT) | \
+				(1 << MTIP_DDF_WRITE_PROTECT_BIT))
+
+#define MTIP_DDF_CLEANUP_BIT		5
+#define MTIP_DDF_RESUME_BIT		6
+#define MTIP_DDF_INIT_DONE_BIT		7
+#define MTIP_DDF_REBUILD_FAILED_BIT	8
+
+__packed struct smart_attr{
+	u8 attr_id;
+	u16 flags;
+	u8 cur;
+	u8 worst;
+	u32 data;
+	u8 res[3];
+};
 
 /* Register Frame Information Structure (FIS), host to device. */
 struct host_to_dev_fis {
@@ -345,6 +374,12 @@
 	 * when the command slot and all associated data structures
 	 * are no longer needed.
 	 */
+	u16 *log_buf;
+	dma_addr_t log_buf_dma;
+
+	u8 *smart_buf;
+	dma_addr_t smart_buf_dma;
+
 	unsigned long allocated[SLOTBITS_IN_LONGS];
 	/*
 	 * used to queue commands when an internal command is in progress
@@ -368,6 +403,7 @@
 	 * Timer used to complete commands that have been active for too long.
 	 */
 	struct timer_list cmd_timer;
+	unsigned long ic_pause_timer;
 	/*
 	 * Semaphore used to block threads if there are no
 	 * command slots available.
@@ -404,13 +440,9 @@
 
 	unsigned slot_groups; /* number of slot groups the product supports */
 
-	atomic_t drv_cleanup_done; /* Atomic variable for SRSI */
-
 	unsigned long index; /* Index to determine the disk name */
 
-	unsigned int ftlrebuildflag; /* FTL rebuild flag */
-
-	atomic_t resumeflag; /* Atomic variable to track suspend/resume */
+	unsigned long dd_flag; /* NOTE: use atomic bit operations on this */
 
 	struct task_struct *mtip_svc_handler; /* task_struct of svc thd */
 };
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index c4a60ba..0d39f2f 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -351,6 +351,7 @@
 		  cap_str_10, cap_str_2);
 
 	set_capacity(vblk->disk, capacity);
+	revalidate_disk(vblk->disk);
 done:
 	mutex_unlock(&vblk->config_lock);
 }
@@ -374,6 +375,34 @@
 	return err;
 }
 
+/*
+ * Legacy naming scheme used for virtio devices.  We are stuck with it for
+ * virtio blk but don't ever use it for any new driver.
+ */
+static int virtblk_name_format(char *prefix, int index, char *buf, int buflen)
+{
+	const int base = 'z' - 'a' + 1;
+	char *begin = buf + strlen(prefix);
+	char *end = buf + buflen;
+	char *p;
+	int unit;
+
+	p = end - 1;
+	*p = '\0';
+	unit = base;
+	do {
+		if (p == begin)
+			return -EINVAL;
+		*--p = 'a' + (index % unit);
+		index = (index / unit) - 1;
+	} while (index >= 0);
+
+	memmove(begin, p, end - p);
+	memcpy(buf, prefix, strlen(prefix));
+
+	return 0;
+}
+
 static int __devinit virtblk_probe(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk;
@@ -442,18 +471,7 @@
 
 	q->queuedata = vblk;
 
-	if (index < 26) {
-		sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26);
-	} else if (index < (26 + 1) * 26) {
-		sprintf(vblk->disk->disk_name, "vd%c%c",
-			'a' + index / 26 - 1, 'a' + index % 26);
-	} else {
-		const unsigned int m1 = (index / 26 - 1) / 26 - 1;
-		const unsigned int m2 = (index / 26 - 1) % 26;
-		const unsigned int m3 =  index % 26;
-		sprintf(vblk->disk->disk_name, "vd%c%c%c",
-			'a' + m1, 'a' + m2, 'a' + m3);
-	}
+	virtblk_name_format("vd", index, vblk->disk->disk_name, DISK_NAME_LEN);
 
 	vblk->disk->major = major;
 	vblk->disk->first_minor = index_to_minor(index);
diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index 0088bf6..73f196c 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -321,6 +321,7 @@
 static void xen_blkbk_unmap(struct pending_req *req)
 {
 	struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+	struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 	unsigned int i, invcount = 0;
 	grant_handle_t handle;
 	int ret;
@@ -332,25 +333,12 @@
 		gnttab_set_unmap_op(&unmap[invcount], vaddr(req, i),
 				    GNTMAP_host_map, handle);
 		pending_handle(req, i) = BLKBACK_INVALID_HANDLE;
+		pages[invcount] = virt_to_page(vaddr(req, i));
 		invcount++;
 	}
 
-	ret = HYPERVISOR_grant_table_op(
-		GNTTABOP_unmap_grant_ref, unmap, invcount);
+	ret = gnttab_unmap_refs(unmap, pages, invcount, false);
 	BUG_ON(ret);
-	/*
-	 * Note, we use invcount, so nr->pages, so we can't index
-	 * using vaddr(req, i).
-	 */
-	for (i = 0; i < invcount; i++) {
-		ret = m2p_remove_override(
-			virt_to_page(unmap[i].host_addr), false);
-		if (ret) {
-			pr_alert(DRV_PFX "Failed to remove M2P override for %lx\n",
-				 (unsigned long)unmap[i].host_addr);
-			continue;
-		}
-	}
 }
 
 static int xen_blkbk_map(struct blkif_request *req,
@@ -378,7 +366,7 @@
 				  pending_req->blkif->domid);
 	}
 
-	ret = HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, map, nseg);
+	ret = gnttab_map_refs(map, NULL, &blkbk->pending_page(pending_req, 0), nseg);
 	BUG_ON(ret);
 
 	/*
@@ -398,15 +386,6 @@
 		if (ret)
 			continue;
 
-		ret = m2p_add_override(PFN_DOWN(map[i].dev_bus_addr),
-			blkbk->pending_page(pending_req, i), NULL);
-		if (ret) {
-			pr_alert(DRV_PFX "Failed to install M2P override for %lx (ret: %d)\n",
-				 (unsigned long)map[i].dev_bus_addr, ret);
-			/* We could switch over to GNTTABOP_copy */
-			continue;
-		}
-
 		seg[i].buf  = map[i].dev_bus_addr |
 			(req->u.rw.seg[i].first_sect << 9);
 	}
@@ -419,21 +398,18 @@
 	int err = 0;
 	int status = BLKIF_RSP_OKAY;
 	struct block_device *bdev = blkif->vbd.bdev;
+	unsigned long secure;
 
 	blkif->st_ds_req++;
 
 	xen_blkif_get(blkif);
-	if (blkif->blk_backend_type == BLKIF_BACKEND_PHY ||
-	    blkif->blk_backend_type == BLKIF_BACKEND_FILE) {
-		unsigned long secure = (blkif->vbd.discard_secure &&
-			(req->u.discard.flag & BLKIF_DISCARD_SECURE)) ?
-			BLKDEV_DISCARD_SECURE : 0;
-		err = blkdev_issue_discard(bdev,
-				req->u.discard.sector_number,
-				req->u.discard.nr_sectors,
-				GFP_KERNEL, secure);
-	} else
-		err = -EOPNOTSUPP;
+	secure = (blkif->vbd.discard_secure &&
+		 (req->u.discard.flag & BLKIF_DISCARD_SECURE)) ?
+		 BLKDEV_DISCARD_SECURE : 0;
+
+	err = blkdev_issue_discard(bdev, req->u.discard.sector_number,
+				   req->u.discard.nr_sectors,
+				   GFP_KERNEL, secure);
 
 	if (err == -EOPNOTSUPP) {
 		pr_debug(DRV_PFX "discard op failed, not supported\n");
@@ -830,7 +806,7 @@
 	int i, mmap_pages;
 	int rc = 0;
 
-	if (!xen_pv_domain())
+	if (!xen_domain())
 		return -ENODEV;
 
 	blkbk = kzalloc(sizeof(struct xen_blkbk), GFP_KERNEL);
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index d0ee7ed..773cf27 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -146,11 +146,6 @@
 	BLKIF_PROTOCOL_X86_64 = 3,
 };
 
-enum blkif_backend_type {
-	BLKIF_BACKEND_PHY  = 1,
-	BLKIF_BACKEND_FILE = 2,
-};
-
 struct xen_vbd {
 	/* What the domain refers to this vbd as. */
 	blkif_vdev_t		handle;
@@ -177,7 +172,6 @@
 	unsigned int		irq;
 	/* Comms information. */
 	enum blkif_protocol	blk_protocol;
-	enum blkif_backend_type blk_backend_type;
 	union blkif_back_rings	blk_rings;
 	void			*blk_ring;
 	/* The VBD attached to this interface. */
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index 24a2fb5..4f66171 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -381,72 +381,49 @@
 	err = xenbus_printf(xbt, dev->nodename, "feature-flush-cache",
 			    "%d", state);
 	if (err)
-		xenbus_dev_fatal(dev, err, "writing feature-flush-cache");
+		dev_warn(&dev->dev, "writing feature-flush-cache (%d)", err);
 
 	return err;
 }
 
-int xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info *be)
+static void xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info *be)
 {
 	struct xenbus_device *dev = be->dev;
 	struct xen_blkif *blkif = be->blkif;
-	char *type;
 	int err;
 	int state = 0;
+	struct block_device *bdev = be->blkif->vbd.bdev;
+	struct request_queue *q = bdev_get_queue(bdev);
 
-	type = xenbus_read(XBT_NIL, dev->nodename, "type", NULL);
-	if (!IS_ERR(type)) {
-		if (strncmp(type, "file", 4) == 0) {
-			state = 1;
-			blkif->blk_backend_type = BLKIF_BACKEND_FILE;
+	if (blk_queue_discard(q)) {
+		err = xenbus_printf(xbt, dev->nodename,
+			"discard-granularity", "%u",
+			q->limits.discard_granularity);
+		if (err) {
+			dev_warn(&dev->dev, "writing discard-granularity (%d)", err);
+			return;
 		}
-		if (strncmp(type, "phy", 3) == 0) {
-			struct block_device *bdev = be->blkif->vbd.bdev;
-			struct request_queue *q = bdev_get_queue(bdev);
-			if (blk_queue_discard(q)) {
-				err = xenbus_printf(xbt, dev->nodename,
-					"discard-granularity", "%u",
-					q->limits.discard_granularity);
-				if (err) {
-					xenbus_dev_fatal(dev, err,
-						"writing discard-granularity");
-					goto kfree;
-				}
-				err = xenbus_printf(xbt, dev->nodename,
-					"discard-alignment", "%u",
-					q->limits.discard_alignment);
-				if (err) {
-					xenbus_dev_fatal(dev, err,
-						"writing discard-alignment");
-					goto kfree;
-				}
-				state = 1;
-				blkif->blk_backend_type = BLKIF_BACKEND_PHY;
-			}
-			/* Optional. */
-			err = xenbus_printf(xbt, dev->nodename,
-				"discard-secure", "%d",
-				blkif->vbd.discard_secure);
-			if (err) {
-				xenbus_dev_fatal(dev, err,
-					"writting discard-secure");
-				goto kfree;
-			}
+		err = xenbus_printf(xbt, dev->nodename,
+			"discard-alignment", "%u",
+			q->limits.discard_alignment);
+		if (err) {
+			dev_warn(&dev->dev, "writing discard-alignment (%d)", err);
+			return;
 		}
-	} else {
-		err = PTR_ERR(type);
-		xenbus_dev_fatal(dev, err, "reading type");
-		goto out;
+		state = 1;
+		/* Optional. */
+		err = xenbus_printf(xbt, dev->nodename,
+				    "discard-secure", "%d",
+				    blkif->vbd.discard_secure);
+		if (err) {
+			dev_warn(&dev->dev, "writing discard-secure (%d)", err);
+			return;
+		}
 	}
-
 	err = xenbus_printf(xbt, dev->nodename, "feature-discard",
 			    "%d", state);
 	if (err)
-		xenbus_dev_fatal(dev, err, "writing feature-discard");
-kfree:
-	kfree(type);
-out:
-	return err;
+		dev_warn(&dev->dev, "writing feature-discard (%d)", err);
 }
 int xen_blkbk_barrier(struct xenbus_transaction xbt,
 		      struct backend_info *be, int state)
@@ -457,7 +434,7 @@
 	err = xenbus_printf(xbt, dev->nodename, "feature-barrier",
 			    "%d", state);
 	if (err)
-		xenbus_dev_fatal(dev, err, "writing feature-barrier");
+		dev_warn(&dev->dev, "writing feature-barrier (%d)", err);
 
 	return err;
 }
@@ -689,14 +666,12 @@
 		return;
 	}
 
-	err = xen_blkbk_flush_diskcache(xbt, be, be->blkif->vbd.flush_support);
-	if (err)
-		goto abort;
-
-	err = xen_blkbk_discard(xbt, be);
-
 	/* If we can't advertise it is OK. */
-	err = xen_blkbk_barrier(xbt, be, be->blkif->vbd.flush_support);
+	xen_blkbk_flush_diskcache(xbt, be, be->blkif->vbd.flush_support);
+
+	xen_blkbk_discard(xbt, be);
+
+	xen_blkbk_barrier(xbt, be, be->blkif->vbd.flush_support);
 
 	err = xenbus_printf(xbt, dev->nodename, "sectors", "%llu",
 			    (unsigned long long)vbd_sz(&be->blkif->vbd));
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 98cbeba..4e86393 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -43,6 +43,7 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/scatterlist.h>
+#include <linux/bitmap.h>
 
 #include <xen/xen.h>
 #include <xen/xenbus.h>
@@ -81,6 +82,7 @@
  */
 struct blkfront_info
 {
+	spinlock_t io_lock;
 	struct mutex mutex;
 	struct xenbus_device *xbdev;
 	struct gendisk *gd;
@@ -105,8 +107,6 @@
 	int is_ready;
 };
 
-static DEFINE_SPINLOCK(blkif_io_lock);
-
 static unsigned int nr_minors;
 static unsigned long *minors;
 static DEFINE_SPINLOCK(minor_lock);
@@ -177,8 +177,7 @@
 
 	spin_lock(&minor_lock);
 	if (find_next_bit(minors, end, minor) >= end) {
-		for (; minor < end; ++minor)
-			__set_bit(minor, minors);
+		bitmap_set(minors, minor, nr);
 		rc = 0;
 	} else
 		rc = -EBUSY;
@@ -193,8 +192,7 @@
 
 	BUG_ON(end > nr_minors);
 	spin_lock(&minor_lock);
-	for (; minor < end; ++minor)
-		__clear_bit(minor, minors);
+	bitmap_clear(minors,  minor, nr);
 	spin_unlock(&minor_lock);
 }
 
@@ -419,7 +417,7 @@
 	struct request_queue *rq;
 	struct blkfront_info *info = gd->private_data;
 
-	rq = blk_init_queue(do_blkif_request, &blkif_io_lock);
+	rq = blk_init_queue(do_blkif_request, &info->io_lock);
 	if (rq == NULL)
 		return -1;
 
@@ -636,14 +634,14 @@
 	if (info->rq == NULL)
 		return;
 
-	spin_lock_irqsave(&blkif_io_lock, flags);
+	spin_lock_irqsave(&info->io_lock, flags);
 
 	/* No more blkif_request(). */
 	blk_stop_queue(info->rq);
 
 	/* No more gnttab callback work. */
 	gnttab_cancel_free_callback(&info->callback);
-	spin_unlock_irqrestore(&blkif_io_lock, flags);
+	spin_unlock_irqrestore(&info->io_lock, flags);
 
 	/* Flush gnttab callback work. Must be done with no locks held. */
 	flush_work_sync(&info->work);
@@ -675,16 +673,16 @@
 {
 	struct blkfront_info *info = container_of(work, struct blkfront_info, work);
 
-	spin_lock_irq(&blkif_io_lock);
+	spin_lock_irq(&info->io_lock);
 	if (info->connected == BLKIF_STATE_CONNECTED)
 		kick_pending_request_queues(info);
-	spin_unlock_irq(&blkif_io_lock);
+	spin_unlock_irq(&info->io_lock);
 }
 
 static void blkif_free(struct blkfront_info *info, int suspend)
 {
 	/* Prevent new requests being issued until we fix things up. */
-	spin_lock_irq(&blkif_io_lock);
+	spin_lock_irq(&info->io_lock);
 	info->connected = suspend ?
 		BLKIF_STATE_SUSPENDED : BLKIF_STATE_DISCONNECTED;
 	/* No more blkif_request(). */
@@ -692,7 +690,7 @@
 		blk_stop_queue(info->rq);
 	/* No more gnttab callback work. */
 	gnttab_cancel_free_callback(&info->callback);
-	spin_unlock_irq(&blkif_io_lock);
+	spin_unlock_irq(&info->io_lock);
 
 	/* Flush gnttab callback work. Must be done with no locks held. */
 	flush_work_sync(&info->work);
@@ -728,10 +726,10 @@
 	struct blkfront_info *info = (struct blkfront_info *)dev_id;
 	int error;
 
-	spin_lock_irqsave(&blkif_io_lock, flags);
+	spin_lock_irqsave(&info->io_lock, flags);
 
 	if (unlikely(info->connected != BLKIF_STATE_CONNECTED)) {
-		spin_unlock_irqrestore(&blkif_io_lock, flags);
+		spin_unlock_irqrestore(&info->io_lock, flags);
 		return IRQ_HANDLED;
 	}
 
@@ -816,7 +814,7 @@
 
 	kick_pending_request_queues(info);
 
-	spin_unlock_irqrestore(&blkif_io_lock, flags);
+	spin_unlock_irqrestore(&info->io_lock, flags);
 
 	return IRQ_HANDLED;
 }
@@ -991,6 +989,7 @@
 	}
 
 	mutex_init(&info->mutex);
+	spin_lock_init(&info->io_lock);
 	info->xbdev = dev;
 	info->vdevice = vdevice;
 	info->connected = BLKIF_STATE_DISCONNECTED;
@@ -1068,7 +1067,7 @@
 
 	xenbus_switch_state(info->xbdev, XenbusStateConnected);
 
-	spin_lock_irq(&blkif_io_lock);
+	spin_lock_irq(&info->io_lock);
 
 	/* Now safe for us to use the shared ring */
 	info->connected = BLKIF_STATE_CONNECTED;
@@ -1079,7 +1078,7 @@
 	/* Kick any other new requests queued since we resumed */
 	kick_pending_request_queues(info);
 
-	spin_unlock_irq(&blkif_io_lock);
+	spin_unlock_irq(&info->io_lock);
 
 	return 0;
 }
@@ -1277,10 +1276,10 @@
 	xenbus_switch_state(info->xbdev, XenbusStateConnected);
 
 	/* Kick pending requests. */
-	spin_lock_irq(&blkif_io_lock);
+	spin_lock_irq(&info->io_lock);
 	info->connected = BLKIF_STATE_CONNECTED;
 	kick_pending_request_queues(info);
-	spin_unlock_irq(&blkif_io_lock);
+	spin_unlock_irq(&info->io_lock);
 
 	add_disk(info->gd);
 
@@ -1410,7 +1409,6 @@
 	mutex_lock(&blkfront_mutex);
 
 	bdev = bdget_disk(disk, 0);
-	bdput(bdev);
 
 	if (bdev->bd_openers)
 		goto out;
@@ -1441,6 +1439,7 @@
 	}
 
 out:
+	bdput(bdev);
 	mutex_unlock(&blkfront_mutex);
 	return 0;
 }
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 4844247..57fd867 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -72,7 +72,11 @@
 
 	/* Atheros AR3012 with sflash firmware*/
 	{ USB_DEVICE(0x0CF3, 0x3004) },
+	{ USB_DEVICE(0x0CF3, 0x311D) },
 	{ USB_DEVICE(0x13d3, 0x3375) },
+	{ USB_DEVICE(0x04CA, 0x3005) },
+	{ USB_DEVICE(0x13d3, 0x3362) },
+	{ USB_DEVICE(0x0CF3, 0xE004) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -89,7 +93,11 @@
 
 	/* Atheros AR3012 with sflash firmware*/
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 
 	{ }	/* Terminating entry */
 };
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 480cad9..9217121 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -61,7 +61,7 @@
 	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
 
 	/* Broadcom SoftSailing reporting vendor specific */
-	{ USB_DEVICE(0x05ac, 0x21e1) },
+	{ USB_DEVICE(0x0a5c, 0x21e1) },
 
 	/* Apple MacBookPro 7,1 */
 	{ USB_DEVICE(0x05ac, 0x8213) },
@@ -101,11 +101,16 @@
 	{ USB_DEVICE(0x0c10, 0x0000) },
 
 	/* Broadcom BCM20702A0 */
+	{ USB_DEVICE(0x0489, 0xe042) },
 	{ USB_DEVICE(0x0a5c, 0x21e3) },
 	{ USB_DEVICE(0x0a5c, 0x21e6) },
+	{ USB_DEVICE(0x0a5c, 0x21e8) },
 	{ USB_DEVICE(0x0a5c, 0x21f3) },
 	{ USB_DEVICE(0x413c, 0x8197) },
 
+	/* Foxconn - Hon Hai */
+	{ USB_DEVICE(0x0489, 0xe033) },
+
 	{ }	/* Terminating entry */
 };
 
@@ -129,7 +134,11 @@
 
 	/* Atheros 3012 with sflash firmware */
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index fd5adb4..98a8c05 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -299,11 +299,11 @@
 			hci_uart_close(hdev);
 
 		if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
-			hu->proto->close(hu);
 			if (hdev) {
 				hci_unregister_dev(hdev);
 				hci_free_dev(hdev);
 			}
+			hu->proto->close(hu);
 		}
 
 		kfree(hu);
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 3845ab4..dfd7876 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -906,8 +906,8 @@
 		hpetp->hp_which, hdp->hd_phys_address,
 		hpetp->hp_ntimer > 1 ? "s" : "");
 	for (i = 0; i < hpetp->hp_ntimer; i++)
-		printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
-	printk("\n");
+		printk(KERN_CONT "%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
+	printk(KERN_CONT "\n");
 
 	temp = hpetp->hp_tick_freq;
 	remainder = do_div(temp, 1000000);
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 54ca8b2..4ec04a7 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1260,10 +1260,15 @@
 	uuid = table->data;
 	if (!uuid) {
 		uuid = tmp_uuid;
-		uuid[8] = 0;
-	}
-	if (uuid[8] == 0)
 		generate_random_uuid(uuid);
+	} else {
+		static DEFINE_SPINLOCK(bootid_spinlock);
+
+		spin_lock(&bootid_spinlock);
+		if (!uuid[8])
+			generate_random_uuid(uuid);
+		spin_unlock(&bootid_spinlock);
+	}
 
 	sprintf(buf, "%pU", uuid);
 
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index ddf86b6..cdf2f54 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1895,6 +1895,13 @@
 
 		/* Get port open/close status on the host */
 		send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+
+		/*
+		 * If a port was open at the time of suspending, we
+		 * have to let the host know that it's still open.
+		 */
+		if (port->guest_connected)
+			send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1);
 	}
 	return 0;
 }
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 82e8820..6b5cf02 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -23,7 +23,6 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
-#include <linux/async.h>
 #include <asm/io.h>
 
 /*
@@ -180,15 +179,17 @@
 /* Number of reads we try to get two different values */
 #define ACPI_PM_READ_CHECKS 10000
 
-static void __init acpi_pm_clocksource_async(void *unused, async_cookie_t cookie)
+static int __init init_acpi_pm_clocksource(void)
 {
 	cycle_t value1, value2;
 	unsigned int i, j = 0;
 
+	if (!pmtmr_ioport)
+		return -ENODEV;
 
 	/* "verify" this timing source: */
 	for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
-		usleep_range(100 * j, 100 * j + 100);
+		udelay(100 * j);
 		value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
 		for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
 			value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
@@ -202,34 +203,25 @@
 			       " 0x%#llx, 0x%#llx - aborting.\n",
 			       value1, value2);
 			pmtmr_ioport = 0;
-			return;
+			return -EINVAL;
 		}
 		if (i == ACPI_PM_READ_CHECKS) {
 			printk(KERN_INFO "PM-Timer failed consistency check "
 			       " (0x%#llx) - aborting.\n", value1);
 			pmtmr_ioport = 0;
-			return;
+			return -ENODEV;
 		}
 	}
 
 	if (verify_pmtmr_rate() != 0){
 		pmtmr_ioport = 0;
-		return;
+		return -ENODEV;
 	}
 
-	clocksource_register_hz(&clocksource_acpi_pm,
+	return clocksource_register_hz(&clocksource_acpi_pm,
 						PMTMR_TICKS_PER_SEC);
 }
 
-static int __init init_acpi_pm_clocksource(void)
-{
-	if (!pmtmr_ioport)
-		return -ENODEV;
-
-	async_schedule(acpi_pm_clocksource_async, NULL);
-	return 0;
-}
-
 /* We use fs_initcall because we want the PCI fixups to have run
  * but we still need to load before device_initcall
  */
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index ffbb446..5961e64 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -4,6 +4,7 @@
 
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
+	depends on ARCH_OMAP2PLUS
 	default ARCH_OMAP2PLUS
 	select CPU_FREQ_TABLE
 
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index ab9abb4..dd414d9 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -164,6 +164,7 @@
 	select CRYPTO_ALGAPI
 	select CRYPTO_AES
 	select CRYPTO_BLKCIPHER2
+	select CRYPTO_HASH
 	help
 	  This driver allows you to utilize the Cryptographic Engines and
 	  Security Accelerator (CESA) which can be found on the Marvell Orion
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 0053d7e..8f3f74c 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -18,6 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/gfp.h>
+#include <linux/module.h>
 
 #include <crypto/ctr.h>
 #include <crypto/des.h>
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index dc641c7..921039e 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -124,6 +124,9 @@
 	void __iomem *reg;
 	int irq[2];
 
+	/* SEC global registers lock  */
+	spinlock_t reg_lock ____cacheline_aligned;
+
 	/* SEC version geometry (from device tree node) */
 	unsigned int num_channels;
 	unsigned int chfifo_len;
@@ -412,6 +415,7 @@
 {									\
 	struct device *dev = (struct device *)data;			\
 	struct talitos_private *priv = dev_get_drvdata(dev);		\
+	unsigned long flags;						\
 									\
 	if (ch_done_mask & 1)						\
 		flush_channel(dev, 0, 0, 0);				\
@@ -427,8 +431,10 @@
 out:									\
 	/* At this point, all completed channels have been processed */	\
 	/* Unmask done interrupts for channels completed later on. */	\
+	spin_lock_irqsave(&priv->reg_lock, flags);			\
 	setbits32(priv->reg + TALITOS_IMR, ch_done_mask);		\
 	setbits32(priv->reg + TALITOS_IMR_LO, TALITOS_IMR_LO_INIT);	\
+	spin_unlock_irqrestore(&priv->reg_lock, flags);			\
 }
 DEF_TALITOS_DONE(4ch, TALITOS_ISR_4CHDONE)
 DEF_TALITOS_DONE(ch0_2, TALITOS_ISR_CH_0_2_DONE)
@@ -619,22 +625,28 @@
 	struct device *dev = data;					       \
 	struct talitos_private *priv = dev_get_drvdata(dev);		       \
 	u32 isr, isr_lo;						       \
+	unsigned long flags;						       \
 									       \
+	spin_lock_irqsave(&priv->reg_lock, flags);			       \
 	isr = in_be32(priv->reg + TALITOS_ISR);				       \
 	isr_lo = in_be32(priv->reg + TALITOS_ISR_LO);			       \
 	/* Acknowledge interrupt */					       \
 	out_be32(priv->reg + TALITOS_ICR, isr & (ch_done_mask | ch_err_mask)); \
 	out_be32(priv->reg + TALITOS_ICR_LO, isr_lo);			       \
 									       \
-	if (unlikely((isr & ~TALITOS_ISR_4CHDONE) & ch_err_mask || isr_lo))    \
-		talitos_error(dev, isr, isr_lo);			       \
-	else								       \
+	if (unlikely(isr & ch_err_mask || isr_lo)) {			       \
+		spin_unlock_irqrestore(&priv->reg_lock, flags);		       \
+		talitos_error(dev, isr & ch_err_mask, isr_lo);		       \
+	}								       \
+	else {								       \
 		if (likely(isr & ch_done_mask)) {			       \
 			/* mask further done interrupts. */		       \
 			clrbits32(priv->reg + TALITOS_IMR, ch_done_mask);      \
 			/* done_task will unmask done interrupts at exit */    \
 			tasklet_schedule(&priv->done_task[tlet]);	       \
 		}							       \
+		spin_unlock_irqrestore(&priv->reg_lock, flags);		       \
+	}								       \
 									       \
 	return (isr & (ch_done_mask | ch_err_mask) || isr_lo) ? IRQ_HANDLED :  \
 								IRQ_NONE;      \
@@ -2719,6 +2731,8 @@
 
 	priv->ofdev = ofdev;
 
+	spin_lock_init(&priv->reg_lock);
+
 	err = talitos_probe_irq(ofdev);
 	if (err)
 		goto err_out;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index cf9da36..ef378b5 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -91,11 +91,10 @@
 
 config AT_HDMAC
 	tristate "Atmel AHB DMA support"
-	depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+	depends on ARCH_AT91
 	select DMA_ENGINE
 	help
-	  Support the Atmel AHB DMA controller.  This can be integrated in
-	  chips such as the Atmel AT91SAM9RL.
+	  Support the Atmel AHB DMA controller.
 
 config FSL_DMA
 	tristate "Freescale Elo and Elo Plus DMA support"
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index c301a8e..3d704ab 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -1429,6 +1429,7 @@
 			 * signal
 			 */
 			release_phy_channel(plchan);
+			plchan->phychan_hold = 0;
 		}
 		/* Dequeue jobs and free LLIs */
 		if (plchan->at) {
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 7aa58d2..bf0d7e4 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -221,10 +221,6 @@
 
 	vdbg_dump_regs(atchan);
 
-	/* clear any pending interrupt */
-	while (dma_readl(atdma, EBCISR))
-		cpu_relax();
-
 	channel_writel(atchan, SADDR, 0);
 	channel_writel(atchan, DADDR, 0);
 	channel_writel(atchan, CTRLA, 0);
@@ -249,7 +245,9 @@
 	dev_vdbg(chan2dev(&atchan->chan_common),
 		"descriptor %u complete\n", txd->cookie);
 
-	dma_cookie_complete(txd);
+	/* mark the descriptor as complete for non cyclic cases only */
+	if (!atc_chan_is_cyclic(atchan))
+		dma_cookie_complete(txd);
 
 	/* move children to free_list */
 	list_splice_init(&desc->tx_list, &atchan->free_list);
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 767bcc3..2397f6f 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -332,6 +332,20 @@
 }
 EXPORT_SYMBOL(dma_find_channel);
 
+/*
+ * net_dma_find_channel - find a channel for net_dma
+ * net_dma has alignment requirements
+ */
+struct dma_chan *net_dma_find_channel(void)
+{
+	struct dma_chan *chan = dma_find_channel(DMA_MEMCPY);
+	if (chan && !is_dma_copy_aligned(chan->device, 1, 1, 1))
+		return NULL;
+
+	return chan;
+}
+EXPORT_SYMBOL(net_dma_find_channel);
+
 /**
  * dma_issue_pending_all - flush all pending operations across all channels
  */
diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index e6f133b..f6e9b57 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -703,7 +703,9 @@
 	desc = ep93xx_dma_get_active(edmac);
 	if (desc) {
 		if (desc->complete) {
-			dma_cookie_complete(&desc->txd);
+			/* mark descriptor complete for non cyclic case only */
+			if (!test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags))
+				dma_cookie_complete(&desc->txd);
 			list_splice_init(&edmac->active, &list);
 		}
 		callback = desc->txd.callback;
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index a45b5d2..bb787d8 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -571,11 +571,14 @@
 	if (desc->desc.callback)
 		desc->desc.callback(desc->desc.callback_param);
 
-	dma_cookie_complete(&desc->desc);
-
-	/* If we are dealing with a cyclic descriptor keep it on ld_active */
+	/* If we are dealing with a cyclic descriptor keep it on ld_active
+	 * and dont mark the descripor as complete.
+	 * Only in non-cyclic cases it would be marked as complete
+	 */
 	if (imxdma_chan_is_doing_cyclic(imxdmac))
 		goto out;
+	else
+		dma_cookie_complete(&desc->desc);
 
 	/* Free 2D slot if it was an interleaved transfer */
 	if (imxdmac->enabled_2d) {
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index 31493d8..73b2b65 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -546,9 +546,9 @@
 			   PCI_DMA_TODEVICE, flags, 0);
 }
 
-unsigned long ioat_get_current_completion(struct ioat_chan_common *chan)
+dma_addr_t ioat_get_current_completion(struct ioat_chan_common *chan)
 {
-	unsigned long phys_complete;
+	dma_addr_t phys_complete;
 	u64 completion;
 
 	completion = *chan->completion;
@@ -569,7 +569,7 @@
 }
 
 bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
-			   unsigned long *phys_complete)
+			   dma_addr_t *phys_complete)
 {
 	*phys_complete = ioat_get_current_completion(chan);
 	if (*phys_complete == chan->last_completion)
@@ -580,14 +580,14 @@
 	return true;
 }
 
-static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete)
+static void __cleanup(struct ioat_dma_chan *ioat, dma_addr_t phys_complete)
 {
 	struct ioat_chan_common *chan = &ioat->base;
 	struct list_head *_desc, *n;
 	struct dma_async_tx_descriptor *tx;
 
-	dev_dbg(to_dev(chan), "%s: phys_complete: %lx\n",
-		 __func__, phys_complete);
+	dev_dbg(to_dev(chan), "%s: phys_complete: %llx\n",
+		 __func__, (unsigned long long) phys_complete);
 	list_for_each_safe(_desc, n, &ioat->used_desc) {
 		struct ioat_desc_sw *desc;
 
@@ -652,7 +652,7 @@
 static void ioat1_cleanup(struct ioat_dma_chan *ioat)
 {
 	struct ioat_chan_common *chan = &ioat->base;
-	unsigned long phys_complete;
+	dma_addr_t phys_complete;
 
 	prefetch(chan->completion);
 
@@ -698,7 +698,7 @@
 		mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
 		spin_unlock_bh(&ioat->desc_lock);
 	} else if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
-		unsigned long phys_complete;
+		dma_addr_t phys_complete;
 
 		spin_lock_bh(&ioat->desc_lock);
 		/* if we haven't made progress and we have already
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index c7888bc..5e8fe01 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -88,7 +88,7 @@
 struct ioat_chan_common {
 	struct dma_chan common;
 	void __iomem *reg_base;
-	unsigned long last_completion;
+	dma_addr_t last_completion;
 	spinlock_t cleanup_lock;
 	unsigned long state;
 	#define IOAT_COMPLETION_PENDING 0
@@ -310,7 +310,7 @@
 void __devexit ioat_dma_remove(struct ioatdma_device *device);
 struct dca_provider * __devinit ioat_dca_init(struct pci_dev *pdev,
 					      void __iomem *iobase);
-unsigned long ioat_get_current_completion(struct ioat_chan_common *chan);
+dma_addr_t ioat_get_current_completion(struct ioat_chan_common *chan);
 void ioat_init_channel(struct ioatdma_device *device,
 		       struct ioat_chan_common *chan, int idx);
 enum dma_status ioat_dma_tx_status(struct dma_chan *c, dma_cookie_t cookie,
@@ -318,7 +318,7 @@
 void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags,
 		    size_t len, struct ioat_dma_descriptor *hw);
 bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
-			   unsigned long *phys_complete);
+			   dma_addr_t *phys_complete);
 void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type);
 void ioat_kobject_del(struct ioatdma_device *device);
 extern const struct sysfs_ops ioat_sysfs_ops;
diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c
index e8e110f..8689576 100644
--- a/drivers/dma/ioat/dma_v2.c
+++ b/drivers/dma/ioat/dma_v2.c
@@ -128,7 +128,7 @@
 	spin_unlock_bh(&ioat->prep_lock);
 }
 
-static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete)
+static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete)
 {
 	struct ioat_chan_common *chan = &ioat->base;
 	struct dma_async_tx_descriptor *tx;
@@ -179,7 +179,7 @@
 static void ioat2_cleanup(struct ioat2_dma_chan *ioat)
 {
 	struct ioat_chan_common *chan = &ioat->base;
-	unsigned long phys_complete;
+	dma_addr_t phys_complete;
 
 	spin_lock_bh(&chan->cleanup_lock);
 	if (ioat_cleanup_preamble(chan, &phys_complete))
@@ -260,7 +260,7 @@
 static void ioat2_restart_channel(struct ioat2_dma_chan *ioat)
 {
 	struct ioat_chan_common *chan = &ioat->base;
-	unsigned long phys_complete;
+	dma_addr_t phys_complete;
 
 	ioat2_quiesce(chan, 0);
 	if (ioat_cleanup_preamble(chan, &phys_complete))
@@ -275,7 +275,7 @@
 	struct ioat_chan_common *chan = &ioat->base;
 
 	if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
-		unsigned long phys_complete;
+		dma_addr_t phys_complete;
 		u64 status;
 
 		status = ioat_chansts(chan);
@@ -572,9 +572,9 @@
 	 */
 	struct ioat_chan_common *chan = &ioat->base;
 	struct dma_chan *c = &chan->common;
-	const u16 curr_size = ioat2_ring_size(ioat);
+	const u32 curr_size = ioat2_ring_size(ioat);
 	const u16 active = ioat2_ring_active(ioat);
-	const u16 new_size = 1 << order;
+	const u32 new_size = 1 << order;
 	struct ioat_ring_ent **ring;
 	u16 i;
 
diff --git a/drivers/dma/ioat/dma_v2.h b/drivers/dma/ioat/dma_v2.h
index a2c413b..be2a55b 100644
--- a/drivers/dma/ioat/dma_v2.h
+++ b/drivers/dma/ioat/dma_v2.h
@@ -74,7 +74,7 @@
 	return container_of(chan, struct ioat2_dma_chan, base);
 }
 
-static inline u16 ioat2_ring_size(struct ioat2_dma_chan *ioat)
+static inline u32 ioat2_ring_size(struct ioat2_dma_chan *ioat)
 {
 	return 1 << ioat->alloc_order;
 }
@@ -91,7 +91,7 @@
 	return CIRC_CNT(ioat->head, ioat->issued, ioat2_ring_size(ioat));
 }
 
-static inline u16 ioat2_ring_space(struct ioat2_dma_chan *ioat)
+static inline u32 ioat2_ring_space(struct ioat2_dma_chan *ioat)
 {
 	return ioat2_ring_size(ioat) - ioat2_ring_active(ioat);
 }
diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c
index 2c4476c..f7f1dc6 100644
--- a/drivers/dma/ioat/dma_v3.c
+++ b/drivers/dma/ioat/dma_v3.c
@@ -257,7 +257,7 @@
  * The difference from the dma_v2.c __cleanup() is that this routine
  * handles extended descriptor