| # |
| # For a description of the syntax of this configuration file, |
| # see the Configure script. |
| # |
| * |
| * General setup |
| * |
| bool 'Kernel math emulation' CONFIG_MATH_EMULATION y |
| bool 'Normal harddisk support' CONFIG_BLK_DEV_HD y |
| bool 'XT harddisk support' CONFIG_BLK_DEV_XD n |
| bool 'TCP/IP networking' CONFIG_INET y |
| bool 'Limit memory to low 16MB' CONFIG_MAX_16M n |
| bool 'System V IPC' CONFIG_SYSVIPC y |
| bool 'Use -m486 flag for 486-specific optimizations' CONFIG_M486 y |
| * |
| * Program binary formats |
| * |
| bool 'Elf executables' CONFIG_BINFMT_ELF y |
| bool 'COFF executables' CONFIG_BINFMT_COFF y |
| * |
| * SCSI support |
| * |
| bool 'SCSI support?' CONFIG_SCSI n |
| if [ "$CONFIG_SCSI" = "n" ] |
| : |
| : Skipping SCSI configuration options... |
| : |
| else |
| * |
| * SCSI support type (disk, tape, CDrom) |
| * |
| bool 'Scsi disk support' CONFIG_BLK_DEV_SD y |
| bool 'Scsi tape support' CONFIG_CHR_DEV_ST y |
| bool 'Scsi CDROM support' CONFIG_BLK_DEV_SR y |
| bool 'Scsi generic support' CONFIG_CHR_DEV_SG y |
| * |
| * SCSI low-level drivers |
| * |
| bool 'Adaptec AHA152X support' CONFIG_SCSI_AHA152X y |
| bool 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 y |
| bool 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 y |
| bool 'Future Domain 16xx SCSI support' CONFIG_SCSI_FUTURE_DOMAIN y |
| bool 'Generic NCR5380 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 y |
| bool 'PAS16 SCSI support' CONFIG_SCSI_PAS16 y |
| bool 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE y |
| bool 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 y |
| bool 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR y |
| bool '7000FASST SCSI support' CONFIG_SCSI_7000FASST y |
| fi |
| * |
| * Network device support |
| * |
| bool 'Network device support?' CONFIG_ETHERCARDS y |
| if [ "$CONFIG_ETHERCARDS" = "n" ] |
| : |
| : Skipping ethercard configuration options... |
| : |
| else |
| bool 'SLIP (serial line) support' CONFIG_SLIP n |
| if [ "$CONFIG_SLIP" = "y" ] |
| bool ' CSLIP compressed headers' SL_COMPRESSED y |
| # bool ' SLIP debugging on' SL_DUMP y |
| fi |
| #bool 'PPP (point-to-point) support' CONFIG_PPP n |
| bool 'PLIP (parallel port) support' CONFIG_PLIP n |
| bool 'NE2000/NE1000 support' CONFIG_NE2000 n |
| bool 'WD80*3 support' CONFIG_WD80x3 y |
| bool 'SMC Ultra support' CONFIG_ULTRA n |
| bool '3c501 support' CONFIG_EL1 n |
| bool '3c503 support' CONFIG_EL2 n |
| #bool '3c505 support' CONFIG_ELPLUS n |
| #bool '3c507 support' CONFIG_EL16 n |
| bool '3c509/3c579 support' CONFIG_EL3 n |
| bool 'HP PCLAN support' CONFIG_HPLAN n |
| bool 'AT1500 and NE2100 (LANCE and PCnet-ISA) support' CONFIG_LANCE n |
| bool 'AT1700 support' CONFIG_AT1700 n |
| #bool 'Zenith Z-Note support' CONFIG_ZNET n |
| #bool 'EtherExpress support' CONFIG_EEXPRESS n |
| #bool 'DEPCA support' CONFIG_DEPCA n |
| #bool 'NI52** support' CONFIG_NI52 n |
| #bool 'NI65** support' CONFIG_NI65 n |
| #bool 'Ansel Communications EISA 3200 support' CONFIG_AC3200 n |
| #bool 'Cabletron E21xx support (not recommended)' CONFIG_E21 n |
| bool 'D-Link DE600 pocket adaptor support' CONFIG_DE600 n |
| bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP n |
| fi |
| * |
| bool 'Sony CDU31A CDROM driver support' CONFIG_CDU31A n |
| bool 'Mitsumi CDROM driver support' CONFIG_MCD n |
| bool 'Matsushita/Panasonic CDROM driver support' CONFIG_SBPCD n |
| * |
| * Filesystems |
| * |
| bool 'Standard (minix) fs support' CONFIG_MINIX_FS y |
| bool 'Extended fs support' CONFIG_EXT_FS n |
| bool 'Second extended fs support' CONFIG_EXT2_FS y |
| bool 'xiafs filesystem support' CONFIG_XIA_FS n |
| bool 'msdos fs support' CONFIG_MSDOS_FS y |
| bool '/proc filesystem support' CONFIG_PROC_FS y |
| bool 'NFS filesystem support' CONFIG_NFS_FS y |
| bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS n |
| bool 'OS/2 HPFS filesystem support (read only)' CONFIG_HPFS_FS n |
| bool 'System V and Coherent filesystem support' CONFIG_SYSV_FS n |
| * |
| * character devices |
| * |
| #bool 'Keyboard meta-key sends ESC-prefix' CONFIG_KBD_META y |
| #bool 'Keyboard Num Lock on by default' CONFIG_KBD_NUML y |
| bool 'Parallel printer support' CONFIG_PRINTER y |
| bool 'Logitech busmouse support' CONFIG_BUSMOUSE n |
| bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE y |
| if [ "$CONFIG_PSMOUSE" = "y" ] |
| bool 'C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE y |
| fi |
| bool 'Microsoft busmouse support' CONFIG_MS_BUSMOUSE n |
| bool 'ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE n |
| bool 'Selection (cut and paste for virtual consoles)' CONFIG_SELECTION y |
| bool 'QIC-02 tape support' CONFIG_TAPE_QIC02 n |
| bool 'QIC-117 tape support' CONFIG_FTAPE n |
| if [ "$CONFIG_FTAPE" = "y" ] |
| int ' number of ftape buffers' NR_FTAPE_BUFFERS 3 |
| fi |
| * |
| * Sound |
| * |
| bool 'Sound card support' CONFIG_SOUND n |
| * |
| * Kernel hacking |
| * |
| #bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC n |
| bool 'Kernel profiling support' CONFIG_PROFILE n |
| if [ "$CONFIG_SCSI" = "y" ] |
| bool 'Verbose scsi error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS y |
| fi |
| if [ "$CONFIG_SOUND" = "y" ] |
| exec touch .makesound |
| else |
| exec rm -f .makesound |
| fi |