| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Device Tree file for Buffalo Linkstation LS-WVL |
| * |
| * Copyright (C) 2015, 2016 |
| * Roger Shimizu <rogershimizu@gmail.com> |
| */ |
| |
| /dts-v1/; |
| #include "kirkwood-linkstation-6282.dtsi" |
| |
| / { |
| model = "Buffalo Linkstation LS-WVL"; |
| compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood"; |
| |
| memory { /* 256 MB */ |
| device_type = "memory"; |
| reg = <0x00000000 0x10000000>; |
| }; |
| |
| ocp@f1000000 { |
| pinctrl: pin-controller@10000 { |
| pmx_power_hdd1: pmx-power-hdd1 { |
| marvell,pins = "mpp9"; |
| marvell,function = "gpio"; |
| }; |
| pmx_led_hdderr0: pmx-led-hdderr0 { |
| marvell,pins = "mpp34"; |
| marvell,function = "gpio"; |
| }; |
| pmx_led_hdderr1: pmx-led-hdderr1 { |
| marvell,pins = "mpp35"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| sata@80000 { |
| nr-ports = <2>; |
| }; |
| }; |
| |
| gpio_leds { |
| pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm |
| &pmx_led_info &pmx_led_power |
| &pmx_led_function_blue |
| &pmx_led_hdderr0 |
| &pmx_led_hdderr1>; |
| |
| red-hdderr0-led { |
| label = "linkstation:red:hdderr0"; |
| gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| red-hdderr1-led { |
| label = "linkstation:red:hdderr1"; |
| gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| regulators { |
| pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; |
| |
| hdd_power1: regulator@3 { |
| compatible = "regulator-fixed"; |
| reg = <3>; |
| regulator-name = "HDD1 Power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
