blob: b11c3535f3509cac28e2baf7fd5e999001ab0709 [file] [log] [blame]
/*
* MPC86xx HPCN board specific routines
*
* Recode: ZHANG WEI <wei.zhang@freescale.com>
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
*
* Copyright 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>
#include <linux/memblock.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
#include <asm/swiotlb.h>
#include <asm/mpic.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
#include "mpc86xx.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0)
#else
#define DBG(fmt...) do { } while(0)
#endif
#ifdef CONFIG_PCI
extern int uli_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn);
static int mpc86xx_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
{
struct device_node* node;
struct resource rsrc;
node = hose->dn;
of_address_to_resource(node, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x8000) {
return uli_exclude_device(hose, bus, devfn);
}
return PCIBIOS_SUCCESSFUL;
}
#endif /* CONFIG_PCI */
static void __init
mpc86xx_hpcn_setup_arch(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
struct pci_controller *hose;
#endif
dma_addr_t max = 0xffffffff;
if (ppc_md.progress)
ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x8000)
fsl_add_bridge(np, 1);
else
fsl_add_bridge(np, 0);
hose = pci_find_hose_for_OF_device(np);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
}
ppc_md.pci_exclude_device = mpc86xx_exclude_device;
#endif
printk("MPC86xx HPCN board from Freescale Semiconductor\n");
#ifdef CONFIG_SMP
mpc86xx_smp_init();
#endif
#ifdef CONFIG_SWIOTLB
if (memblock_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
}
static void
mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
{
uint svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init mpc86xx_hpcn_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (of_flat_dt_is_compatible(root, "fsl,mpc8641hpcn"))
return 1; /* Looks good */
/* Be nice and don't give silent boot death. Delete this in 2.6.27 */
if (of_flat_dt_is_compatible(root, "mpc86xx")) {
pr_warning("WARNING: your dts/dtb is old. You must update before the next kernel release\n");
return 1;
}
return 0;
}
static long __init
mpc86xx_time_init(void)
{
unsigned int temp;
/* Set the time base to zero */
mtspr(SPRN_TBWL, 0);
mtspr(SPRN_TBWU, 0);
temp = mfspr(SPRN_HID0);
temp |= HID0_TBEN;
mtspr(SPRN_HID0, temp);
asm volatile("isync");
return 0;
}
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
{ .compatible = "fsl,rapidio-delta", },
{ .compatible = "gianfar", },
{},
};
static int __init declare_of_platform_devices(void)
{
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices);
machine_arch_initcall(mpc86xx_hpcn, swiotlb_setup_bus_notifier);
define_machine(mpc86xx_hpcn) {
.name = "MPC86xx HPCN",
.probe = mpc86xx_hpcn_probe,
.setup_arch = mpc86xx_hpcn_setup_arch,
.init_IRQ = mpc86xx_init_irq,
.show_cpuinfo = mpc86xx_hpcn_show_cpuinfo,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.time_init = mpc86xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};