Merge tag 'mtd/fixes-for-5.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtf fixes from Miquel Raynal:

 - Fix the memory organization structure of a Macronix SPI-NAND chip.

 - Fix a build dependency wrongly described.

 - Fix the sunxi NAND driver for A23/A33 SoCs by (a) reverting the
   faulty commit introducing broken DMA support and (b) applying another
   commit bringing working DMA support.

* tag 'mtd/fixes-for-5.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configuration
  Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support"
  mtd: rawnand: ingenic: Fix ingenic_ecc dependency
  mtd: spinand: Fix max_bad_eraseblocks_per_lun info in memorg
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
index 19a96ce..66b7cff 100644
--- a/drivers/mtd/nand/raw/ingenic/Kconfig
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -16,7 +16,7 @@
 if MTD_NAND_JZ4780
 
 config MTD_NAND_INGENIC_ECC
-	tristate
+	bool
 
 config MTD_NAND_JZ4740_ECC
 	tristate "Hardware BCH support for JZ4740 SoC"
diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile
index 1ac4f45..b63d368 100644
--- a/drivers/mtd/nand/raw/ingenic/Makefile
+++ b/drivers/mtd/nand/raw/ingenic/Makefile
@@ -2,7 +2,9 @@
 obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
 obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o
 
-obj-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o
+ingenic_nand-y += ingenic_nand_drv.o
+ingenic_nand-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o
+
 obj-$(CONFIG_MTD_NAND_JZ4740_ECC) += jz4740_ecc.o
 obj-$(CONFIG_MTD_NAND_JZ4725B_BCH) += jz4725b_bch.o
 obj-$(CONFIG_MTD_NAND_JZ4780_BCH) += jz4780_bch.o
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
index d3e085c..c954189 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c
@@ -30,7 +30,6 @@
 {
 	return ecc->ops->calculate(ecc, params, buf, ecc_code);
 }
-EXPORT_SYMBOL(ingenic_ecc_calculate);
 
 /**
  * ingenic_ecc_correct() - detect and correct bit errors
@@ -51,7 +50,6 @@
 {
 	return ecc->ops->correct(ecc, params, buf, ecc_code);
 }
-EXPORT_SYMBOL(ingenic_ecc_correct);
 
 /**
  * ingenic_ecc_get() - get the ECC controller device
@@ -111,7 +109,6 @@
 	}
 	return ecc;
 }
-EXPORT_SYMBOL(of_ingenic_ecc_get);
 
 /**
  * ingenic_ecc_release() - release the ECC controller device
@@ -122,7 +119,6 @@
 	clk_disable_unprepare(ecc->clk);
 	put_device(ecc->dev);
 }
-EXPORT_SYMBOL(ingenic_ecc_release);
 
 int ingenic_ecc_probe(struct platform_device *pdev)
 {
@@ -159,8 +155,3 @@
 	return 0;
 }
 EXPORT_SYMBOL(ingenic_ecc_probe);
-
-MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
-MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
-MODULE_DESCRIPTION("Ingenic ECC common driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
similarity index 100%
rename from drivers/mtd/nand/raw/ingenic/ingenic_nand.c
rename to drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index b021a57..8977329 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -51,6 +51,7 @@
 #define NFC_REG_USER_DATA(x)	(0x0050 + ((x) * 4))
 #define NFC_REG_SPARE_AREA	0x00A0
 #define NFC_REG_PAT_ID		0x00A4
+#define NFC_REG_MDMA_CNT	0x00C4
 #define NFC_RAM0_BASE		0x0400
 #define NFC_RAM1_BASE		0x0800
 
@@ -69,6 +70,7 @@
 #define NFC_PAGE_SHIFT(x)	(((x) < 10 ? 0 : (x) - 10) << 8)
 #define NFC_SAM			BIT(12)
 #define NFC_RAM_METHOD		BIT(14)
+#define NFC_DMA_TYPE_NORMAL	BIT(15)
 #define NFC_DEBUG_CTL		BIT(31)
 
 /* define bit use in NFC_ST */
@@ -205,14 +207,13 @@
  * NAND Controller capabilities structure: stores NAND controller capabilities
  * for distinction between compatible strings.
  *
- * @sram_through_ahb:	On A23, we choose to access the internal RAM through AHB
- *                      instead of MBUS (less configuration). A10, A10s, A13 and
- *                      A20 use the MBUS but no extra configuration is needed.
+ * @extra_mbus_conf:	Contrary to A10, A10s and A13, accessing internal RAM
+ *			through MBUS on A23/A33 needs extra configuration.
  * @reg_io_data:	I/O data register
  * @dma_maxburst:	DMA maxburst
  */
 struct sunxi_nfc_caps {
-	bool sram_through_ahb;
+	bool extra_mbus_conf;
 	unsigned int reg_io_data;
 	unsigned int dma_maxburst;
 };
@@ -368,28 +369,12 @@
 		goto err_unmap_buf;
 	}
 
-	/*
-	 * On A23, we suppose the "internal RAM" (p.12 of the NFC user manual)
-	 * refers to the NAND controller's internal SRAM. This memory is mapped
-	 * and so is accessible from the AHB. It seems that it can also be
-	 * accessed by the MBUS. MBUS accesses are mandatory when using the
-	 * internal DMA instead of the external DMA engine.
-	 *
-	 * During DMA I/O operation, either we access this memory from the AHB
-	 * by clearing the NFC_RAM_METHOD bit, or we set the bit and use the
-	 * MBUS. In this case, we should also configure the MBUS DMA length
-	 * NFC_REG_MDMA_CNT(0xC4) to be chunksize * nchunks. NAND I/O over MBUS
-	 * are also limited to 32kiB pages.
-	 */
-	if (nfc->caps->sram_through_ahb)
-		writel(readl(nfc->regs + NFC_REG_CTL) & ~NFC_RAM_METHOD,
-		       nfc->regs + NFC_REG_CTL);
-	else
-		writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD,
-		       nfc->regs + NFC_REG_CTL);
-
+	writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD,
+	       nfc->regs + NFC_REG_CTL);
 	writel(nchunks, nfc->regs + NFC_REG_SECTOR_NUM);
 	writel(chunksize, nfc->regs + NFC_REG_CNT);
+	if (nfc->caps->extra_mbus_conf)
+		writel(chunksize * nchunks, nfc->regs + NFC_REG_MDMA_CNT);
 
 	dmat = dmaengine_submit(dmad);
 
@@ -2151,6 +2136,11 @@
 		dmac_cfg.src_maxburst = nfc->caps->dma_maxburst;
 		dmac_cfg.dst_maxburst = nfc->caps->dma_maxburst;
 		dmaengine_slave_config(nfc->dmac, &dmac_cfg);
+
+		if (nfc->caps->extra_mbus_conf)
+			writel(readl(nfc->regs + NFC_REG_CTL) |
+			       NFC_DMA_TYPE_NORMAL, nfc->regs + NFC_REG_CTL);
+
 	} else {
 		dev_warn(dev, "failed to request rxtx DMA channel\n");
 	}
@@ -2200,7 +2190,7 @@
 };
 
 static const struct sunxi_nfc_caps sunxi_nfc_a23_caps = {
-	.sram_through_ahb = true,
+	.extra_mbus_conf = true,
 	.reg_io_data = NFC_REG_A23_IO_DATA,
 	.dma_maxburst = 8,
 };
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index e558639..e6c6460 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -180,7 +180,7 @@
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
 	SPINAND_INFO("GD5F4GQ4xA", 0xF4,
-		     NAND_MEMORG(1, 2048, 64, 64, 4096, 40, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 64, 64, 4096, 80, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 6502727..21def3f 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -100,7 +100,7 @@
 
 static const struct spinand_info macronix_spinand_table[] = {
 	SPINAND_INFO("MX35LF1GE4AB", 0x12,
-		     NAND_MEMORG(1, 2048, 64, 64, 1024, 40, 1, 1, 1),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(4, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
@@ -109,7 +109,7 @@
 		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
 				     mx35lf1ge4ab_ecc_get_status)),
 	SPINAND_INFO("MX35LF2GE4AB", 0x22,
-		     NAND_MEMORG(1, 2048, 64, 64, 2048, 20, 2, 1, 1),
+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 2, 1, 1),
 		     NAND_ECCREQ(4, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,