Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream

There are few important bug fixes for LogFS

* tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream:
  Logfs: Allow NULL block_isbad() methods
  logfs: Grow inode in delete path
  logfs: Free areas before calling generic_shutdown_super()
  logfs: remove useless BUG_ON
  MAINTAINERS: Add Prasad Joshi in LogFS maintiners
  logfs: Propagate page parameter to __logfs_write_inode
  logfs: set superblock shutdown flag after generic sb shutdown
  logfs: take write mutex lock during fsync and sync
  logfs: Prevent memory corruption
  logfs: update page reference count for pined pages

Fix up conflict in fs/logfs/dev_mtd.c due to semantic change in what
"mtd->block_isbad" means in commit f2933e86ad93: "Logfs: Allow NULL
block_isbad() methods" clashing with the abstraction changes in the
commits 7086c19d0742: "mtd: introduce mtd_block_isbad interface" and
d58b27ed58a3: "logfs: do not use 'mtd->block_isbad' directly".

This resolution takes the semantics from commit f2933e86ad93, and just
makes mtd_block_isbad() return zero (false) if the 'block_isbad'
function is NULL.  But that also means that now "mtd_can_have_bb()"
always returns 0.

Now, "mtd_block_markbad()" will obviously return an error if the
low-level driver doesn't support bad blocks, so this is somewhat
non-symmetric, but it actually makes sense if a NULL "block_isbad"
function is considered to mean "I assume that all my blocks are always
good".
diff --git a/CREDITS b/CREDITS
index 44fce98..370b4c7 100644
--- a/CREDITS
+++ b/CREDITS
@@ -514,6 +514,11 @@
 S: Amsterdam
 S: The Netherlands
 
+N: NeilBrown
+E: neil@brown.name
+P: 4096R/566281B9 1BC6 29EB D390 D870 7B5F  497A 39EC 9EDD 5662 81B9
+D: NFSD Maintainer 2000-2007
+
 N: Zach Brown
 E: zab@zabbo.net
 D: maestro pci sound
diff --git a/Documentation/ABI/stable/sysfs-bus-xen-backend b/Documentation/ABI/stable/sysfs-bus-xen-backend
new file mode 100644
index 0000000..3d5951c
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-xen-backend
@@ -0,0 +1,75 @@
+What:		/sys/bus/xen-backend/devices/*/devtype
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The type of the device.  e.g., one of: 'vbd' (block),
+                'vif' (network), or 'vfb' (framebuffer).
+
+What:		/sys/bus/xen-backend/devices/*/nodename
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                XenStore node (under /local/domain/NNN/) for this
+                backend device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/physical_device
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The major:minor number (in hexidecimal) of the
+                physical device providing the storage for this backend
+                block device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/mode
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Whether the block device is read-only ('r') or
+                read-write ('w').
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/f_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of flush requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/oo_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of requests delayed because the backend was too
+                busy processing previous requests.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of read requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors read by the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of write requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors written by the frontend.
diff --git a/Documentation/ABI/stable/sysfs-devices-system-xen_memory b/Documentation/ABI/stable/sysfs-devices-system-xen_memory
new file mode 100644
index 0000000..caa311d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-system-xen_memory
@@ -0,0 +1,77 @@
+What:		/sys/devices/system/xen_memory/xen_memory0/max_retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The maximum number of times the balloon driver will
+		attempt to increase the balloon before giving up.  See
+		also 'retry_count' below.
+		A value of zero means retry forever and is the default one.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/max_schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The limit that 'schedule_delay' (see below) will be
+		increased to. The default value is 32 seconds.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The current number of times that the balloon driver
+		has attempted to increase the size of the balloon.
+		The default value is one. With max_retry_count being
+		zero (unlimited), this means that the driver will attempt
+		to retry with a 'schedule_delay' delay.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The time (in seconds) to wait between attempts to
+		increase the balloon.  Each time the balloon cannot be
+		increased, 'schedule_delay' is increased (until
+		'max_schedule_delay' is reached at which point it
+		will use the max value).
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The target number of pages to adjust this domain's
+		memory reservation to.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		As target above, except the value is in KiB.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/current_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Current size (in KiB) of this domain's memory
+		reservation.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/high_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of high memory in the balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/low_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of low (or normal) memory in the
+		balloon.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 349ecf2..34f5110 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -66,6 +66,24 @@
 		re-discover previously removed devices.
 		Depends on CONFIG_HOTPLUG.
 
+What:		/sys/bus/pci/devices/.../msi_irqs/
+Date:		September, 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		The /sys/devices/.../msi_irqs directory contains a variable set
+		of sub-directories, with each sub-directory being named after a
+		corresponding msi irq vector allocated to that device.  Each
+		numbered sub-directory N contains attributes of that irq.
+		Note that this directory is not created for device drivers which
+		do not support msi irqs
+
+What:		/sys/bus/pci/devices/.../msi_irqs/<N>/mode
+Date:		September 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		This attribute indicates the mode that the irq vector named by
+		the parent directory is in (msi vs. msix)
+
 What:		/sys/bus/pci/devices/.../remove
 Date:		January 2009
 Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index e647378..b4f5487 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -119,6 +119,31 @@
 		Write a 1 to force the device to disconnect
 		(equivalent to unplugging a wired USB device).
 
+What:		/sys/bus/usb/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a USB device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time. The format for the device ID is:
+		idVendor idProduct bInterfaceClass.
+		The vendor ID and device ID fields are required, the
+		interface class is optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
+
+What:		/sys/bus/usb-serial/drivers/.../new_id
+Date:		October 2011
+Contact:	linux-usb@vger.kernel.org
+Description:
+		For serial USB drivers, this attribute appears under the
+		extra bus folder "usb-serial" in sysfs; apart from that
+		difference, all descriptions from the entry
+		"/sys/bus/usb/drivers/.../new_id" apply.
+
 What:		/sys/bus/usb/drivers/.../remove_id
 Date:		November 2009
 Contact:	CHENG Renquan <rqcheng@smu.edu.sg>
diff --git a/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
new file mode 100644
index 0000000..4cf1e72
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration
@@ -0,0 +1,12 @@
+What:           Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
+Date:           Oct 2011
+KernelVersion:  3.0
+Contact:        Mark Godfrey <mark.godfrey@stericsson.com>
+Description:    The rtc_calibration attribute allows the userspace to
+                calibrate the AB8500.s 32KHz Real Time Clock.
+                Every 60 seconds the AB8500 will correct the RTC's value
+                by adding to it the value of this attribute.
+                The range of the attribute is -127 to +127 in units of
+                30.5 micro-seconds (half-parts-per-million of the 32KHz clock)
+Users:          The /vendor/st-ericsson/base_utilities/core/rtc_calibration
+                daemon uses this interface.
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-docg3 b/Documentation/ABI/testing/sysfs-devices-platform-docg3
new file mode 100644
index 0000000..8aa3671
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-docg3
@@ -0,0 +1,34 @@
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_is_keylocked
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Show whether the floor (0 to 4), protection area (0 or 1) is
+		keylocked. Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The result is:
+		0 -> the DPS is not keylocked
+		1 -> the DPS is keylocked
+Users:		None identified so far.
+
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_protection_key
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Enter the protection key for the floor (0 to 4), protection area
+		(0 or 1). Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The protection key is a string of 8 bytes (value 0-255).
+		Entering the correct value toggle the lock, and can be observed
+		through f[0-3]_dps[01]_is_keylocked.
+		Possible values are:
+			- 8 bytes
+		Typical values are:
+			- "00000000"
+			- "12345678"
+Users:		None identified so far.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff b/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
index 9aec8ef..167d903 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
+++ b/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
@@ -1,7 +1,7 @@
 What:		/sys/module/hid_logitech/drivers/hid:logitech/<dev>/range.
 Date:		July 2011
 KernelVersion:	3.2
-Contact:	Michal Malý <madcatxster@gmail.com>
+Contact:	Michal Malý <madcatxster@gmail.com>
 Description:	Display minimum, maximum and current range of the steering
 		wheel. Writing a value within min and max boundaries sets the
 		range of the wheel.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-multitouch b/Documentation/ABI/testing/sysfs-driver-hid-multitouch
new file mode 100644
index 0000000..f79839d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-multitouch
@@ -0,0 +1,9 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/quirks
+Date:		November 2011
+Contact:	Benjamin Tissoires <benjamin.tissoires@gmail.com>
+Description:	The integer value of this attribute corresponds to the
+		quirks actually in place to handle the device's protocol.
+		When read, this attribute returns the current settings (see
+		MT_QUIRKS_* in hid-multitouch.c).
+		When written this attribute change on the fly the quirks, then
+		the protocol to handle the device.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
new file mode 100644
index 0000000..189dc43
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
@@ -0,0 +1,135 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/actual_profile
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+		When read, this attribute returns the number of the actual
+		profile. This value is persistent, so its equivalent to the
+		profile that's active when the device is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the device activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/info
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		The data is 6 bytes long.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/key_mask
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one deactivate certain keys like
+		windows and application keys, to prevent accidental presses.
+		Profile number for which this settings occur is included in
+		written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_capslock
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		capslock key for a specific profile. Profile number is included
+		in written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_easyzone
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		easyzone keys for a specific profile. Profile number is included
+		in written data. The data has to be 65 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_function
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		function keys for a specific profile. Profile number is included
+		in written data. The data has to be 41 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the macro
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 35 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_media
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the media
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 29 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_thumbster
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		thumbster keys for a specific profile. Profile number is included
+		in written data. The data has to be 23 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/last_set
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the time in secs since
+		epoch in which the last configuration took place.
+		The data has to be 20 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/light
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the backlight intensity for
+		a specific profile. Profile number is included in written data.
+		The data has to be 10 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 500
+		keystrokes for a specific button for a specific profile.
+		Button and profile numbers are included in written data.
+		The data has to be 2083 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talk
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger easyshift functionality
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
index 5d5a16e..3d98009 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-wiimote
+++ b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
@@ -8,3 +8,15 @@
 Description:	Make it possible to set/get current led state. Reading from it
 		returns 0 if led is off and 1 if it is on. Writing 0 to it
 		disables the led, writing 1 enables it.
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/extension
+Date:		August 2011
+KernelVersion:	3.2
+Contact:	David Herrmann <dh.herrmann@googlemail.com>
+Description:	This file contains the currently connected and initialized
+		extensions. It can be one of: none, motionp, nunchuck, classic,
+		motionp+nunchuck, motionp+classic
+		motionp is the official Nintendo Motion+ extension, nunchuck is
+		the official Nintendo Nunchuck extension and classic is the
+		Nintendo Classic Controller extension. The motionp extension can
+		be combined with the other two.
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
index 82d4df1..0130d66 100644
--- a/Documentation/ABI/testing/sysfs-driver-wacom
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -15,9 +15,9 @@
 Description:
 		Attribute group for control of the status LEDs and the OLEDs.
 		This attribute group is only available for Intuos 4 M, L,
-		and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only).
-		Therefore its presence implicitly signifies the presence of
-		said LEDs and OLEDs on the tablet device.
+		and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD
+		(LEDs only). Therefore its presence implicitly signifies the
+		presence of said LEDs and OLEDs on the tablet device.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
 Date:		August 2011
@@ -41,16 +41,17 @@
 Contact:	linux-input@vger.kernel.org
 Description:
 		Writing to this file sets which one of the four (for Intuos 4)
-		or of the right four (for Cintiq 21UX2) status LEDs is active (0..3).
-		The other three LEDs on the same side are always inactive.
+		or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status
+		LEDs is active (0..3). The other three LEDs on the same side are
+		always inactive.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
 Date:		September 2011
 Contact:	linux-input@vger.kernel.org
 Description:
-		Writing to this file sets which one of the left four (for Cintiq 21UX2)
-		status LEDs is active (0..3). The other three LEDs on the left are always
-		inactive.
+		Writing to this file sets which one of the left four (for Cintiq 21UX2
+		and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
+		the left are always inactive.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
 Date:		August 2011
diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
index 8b093f8..91bd6ca 100644
--- a/Documentation/ABI/testing/sysfs-kernel-slab
+++ b/Documentation/ABI/testing/sysfs-kernel-slab
@@ -346,6 +346,10 @@
 		number of objects per slab.  If a slab cannot be allocated
 		because of fragmentation, SLUB will retry with the minimum order
 		possible depending on its characteristics.
+		When debug_guardpage_minorder=N (N > 0) parameter is specified
+		(see Documentation/kernel-parameters.txt), the minimum possible
+		order is used and this sysfs entry can not be used to change
+		the order at run time.
 
 What:		/sys/kernel/slab/cache/order_fallback
 Date:		April 2008
diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
index 9489ea8..47064c2 100644
--- a/Documentation/ABI/testing/sysfs-module
+++ b/Documentation/ABI/testing/sysfs-module
@@ -33,3 +33,19 @@
 		Beware, non-standard modes are usually not thoroughly tested by
 		hardware designers, and the hardware can malfunction when this
 		setting differ from default 100.
+
+What:		/sys/module/*/{coresize,initsize}
+Date:		Jan 2012
+KernelVersion:»·3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module size in bytes.
+
+What:		/sys/module/*/taint
+Date:		Jan 2012
+KernelVersion:»·3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module taint flags:
+			P - proprietary module
+			O - out-of-tree module
+			F - force-loaded module
+			C - staging driver module
diff --git a/Documentation/DocBook/debugobjects.tmpl b/Documentation/DocBook/debugobjects.tmpl
index 08ff908..24979f6 100644
--- a/Documentation/DocBook/debugobjects.tmpl
+++ b/Documentation/DocBook/debugobjects.tmpl
@@ -96,6 +96,7 @@
 	<listitem><para>debug_object_deactivate</para></listitem>
 	<listitem><para>debug_object_destroy</para></listitem>
 	<listitem><para>debug_object_free</para></listitem>
+	<listitem><para>debug_object_assert_init</para></listitem>
       </itemizedlist>
       Each of these functions takes the address of the real object and
       a pointer to the object type specific debug description
@@ -273,6 +274,26 @@
 	debug checks.
       </para>
     </sect1>
+
+    <sect1 id="debug_object_assert_init">
+      <title>debug_object_assert_init</title>
+      <para>
+	This function is called to assert that an object has been
+	initialized.
+      </para>
+      <para>
+	When the real object is not tracked by debugobjects, it calls
+	fixup_assert_init of the object type description structure
+	provided by the caller, with the hardcoded object state
+	ODEBUG_NOT_AVAILABLE. The fixup function can correct the problem
+	by calling debug_object_init and other specific initializing
+	functions.
+      </para>
+      <para>
+	When the real object is already tracked by debugobjects it is
+	ignored.
+      </para>
+    </sect1>
   </chapter>
   <chapter id="fixupfunctions">
     <title>Fixup functions</title>
@@ -381,6 +402,35 @@
 	statistics.
       </para>
     </sect1>
+    <sect1 id="fixup_assert_init">
+      <title>fixup_assert_init</title>
+      <para>
+	This function is called from the debug code whenever a problem
+	in debug_object_assert_init is detected.
+      </para>
+      <para>
+	Called from debug_object_assert_init() with a hardcoded state
+	ODEBUG_STATE_NOTAVAILABLE when the object is not found in the
+	debug bucket.
+      </para>
+      <para>
+	The function returns 1 when the fixup was successful,
+	otherwise 0. The return value is used to update the
+	statistics.
+      </para>
+      <para>
+	Note, this function should make sure debug_object_init() is
+	called before returning.
+      </para>
+      <para>
+	The handling of statically initialized objects is a special
+	case. The fixup function should check if this is a legitimate
+	case of a statically initialized object or not. In this case only
+	debug_object_init() should be called to make the object known to
+	the tracker. Then the function should return 0 because this is not
+	a real fixup.
+      </para>
+    </sect1>
   </chapter>
   <chapter id="bugs">
     <title>Known Bugs And Assumptions</title>
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index b638e50..2f7fd43 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -50,7 +50,9 @@
 
      <sect1><title>Delaying, scheduling, and timer routines</title>
 !Iinclude/linux/sched.h
-!Ekernel/sched.c
+!Ekernel/sched/core.c
+!Ikernel/sched/cpupri.c
+!Ikernel/sched/fair.c
 !Iinclude/linux/completion.h
 !Ekernel/timer.c
      </sect1>
@@ -216,7 +218,6 @@
 
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
-!Iinclude/linux/serial_core.h
 !Edrivers/tty/serial/serial_core.c
 !Edrivers/tty/serial/8250.c
   </chapter>
diff --git a/Documentation/DocBook/deviceiobook.tmpl b/Documentation/DocBook/deviceiobook.tmpl
index c1ed6a4..54199a0 100644
--- a/Documentation/DocBook/deviceiobook.tmpl
+++ b/Documentation/DocBook/deviceiobook.tmpl
@@ -317,7 +317,7 @@
   <chapter id="pubfunctions">
      <title>Public Functions Provided</title>
 !Iarch/x86/include/asm/io.h
-!Elib/iomap.c
+!Elib/pci_iomap.c
   </chapter>
 
 </book>
diff --git a/Documentation/DocBook/media/constraints.png.b64 b/Documentation/DocBook/media/constraints.png.b64
new file mode 100644
index 0000000..125b4a9
--- /dev/null
+++ b/Documentation/DocBook/media/constraints.png.b64
@@ -0,0 +1,59 @@
+iVBORw0KGgoAAAANSUhEUgAAAlQAAAFYCAYAAACVsmLPAAAAAXNSR0IArs4c6QAAAAZiS0dEAP8A
+/wD/oL2nkwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAAd0SU1FB9sLCBIAKVtZsMAAAAxxSURBVHja
+7d3ZbqvIAkDRLsv//8v0QytXvpYZap7Wko56OAnE2AXbBSbhOI7jHwAAkr1sAgAAQQUAIKgAAAQV
+AICgAgBAUAEACCoAAEEFACCoAAAQVAAAzb2jvyMEWw0AmFvh37xnhgoAQFABAPT1zvruwtNlAADV
+VLxsyQwVAICgAgAQVAAAggoAQFABACCoYEohuFkugKACsmLq178DIKiAyJgSVQCCCigQU6IKQFAB
+BWJKVAEIKqBgKIkqAEEFFAgkUQUgqIACYSSqAAQViKkwxjIAEFSwbUyJKgBBBWJq8GUCIKhgm5gS
+VQCCCsSUqAIQVMBYoSOqAAQVLOk41lwXAIIKhoqqJyFUYhkACCpYMqpiQqjEMgAQVLBUVKWEUIll
+ACCoYImoygmhEssAQFDBElHVexkACCoAAEEFACCoAAAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQA
+AIIKAABBBQAgqAAABBUAgKACAOA/b5sAGjsO2wBgMWaoAAAEFQCAoAIAEFQAADtzUXohIQQbAYDi
+Dh9kmYIZKgAAQQUAIKgAAAQVAICgAgAgmU/5VeSTGQDE8InxeZmhAgAQVAAAggoAQFABAAgqAAAE
+FQCAoAIAEFQAAHtyY0/o4O7efe4JCzAXM1QAAIIKAEBQAQAIKgAAQQUAgKACABBUAACCCgBAUAEA
+IKgAAAQVAICgAgAQVAAACCoAAEEFACCoAAAEFVBICGMsAwBBBVPHVE4QlVgGAIIKpo6ps/9utQwA
+BBUsEVMpQVRiGQAIKlgqpmKCqMQyABBUsGRMzbouAAQVNHMca64LAEEFy0WVmAIQVCCqxBSAoAL6
+hI+YAhBUIKrEFICgAvqEkJgCEFQgqo4+3wuAoILto0pMAQgqICOQxBSAoAIyQklMAQgqICOYxBSA
+oAIyokpMAQgqICOqxBTAvN42AYwTVQDMyQwVAICgAgAQVAAAggoAQFABAJDMp/y4FIJtwJx8ehJo
+yQwVAICgAgDoyyk/HnMKhdE5RQ30YoYKAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQV
+AICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIKAEBQAQAIKgAA
+BBUAgKACABBUAACCCgAAQQUAIKgAAAQVAICgAgBAUAEACCoAAEEFACCoAAAQVAAAggoAQFABAAgq
+AACGCKoQPAs2JQAIquwCUAI2JQAIqowCOPtvbEoAEFQRBaAEbEoAEFQFCkAJ2JQAIKgKFIASsClh
+szEKrDGoXkNuiOPwwim4iezYoc9+39iDfQbVq+mGEFOiCjZ7E23swR6D6tV8Q4gpUQWb7PeNPdhn
+UL26bAgxJapgk/2+sQd7DKr3EDE1y96mUPT1fqgh6Ffosbsz9mDdQfXquiEY/rUKlBtLYgoqDJZB
+Dmjlg8qRWlSBMSSmYLOoKhtUjtCiCowdMQUbRtXLswUgpkBU5XkXf9CmPJZ9nQJrft6Gife9XmC/
+t0mHg9tr3FcJYgrmjilgn8Fa55SfI7WYAvtnYKNBW+8+VLGn/zY6wtd4qDY1iCngx+BtdNCre1G6
+W3gPt7MXUwAwW1CJKjEFCzB2wODtH1SiSkyB/TKw+KB9DfnARJWYAvtnYKLB+m7+AJ+UgL2WTQmT
+jz1jEJVf0ASD7jXck2/vY1PCQscwE+6wfkz1CaqrB6wAbEoQVcBkMdUvqH49cAVgU4KoAiaMqb5B
+9bkBFIBNCaIKmDSm+geVArApYaOxZ4zCuoPq5VkDqL//F1Ow9qASVACV9/9iCtYfVIIKoOL+X0zB
+HoNKUAFU2v+LKdhnUAkqgAZvqoG1B5WgAgAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQAAIIKAABB
+BQAgqAAABBUAgKACAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQVAICgAgAY3NsmIEYI
+//3zONK/7u/v/nx+zdPl/1rO0++LWd6vZZ59Xe7jSfnZSq3z6jnJ2ValX09PHj9AD2aoiPJ34Lo6
+wJWKiJQD7N2BN/WAzbNtZTsCuzJDRZeD8XHkH3zPZo5CSJudeTKbdrX+lkE7QkzFbq8VHj/AGTNU
+dDkY1ziw1jjY7nAA/wzKqxnIu5gSPICggoTIuDroXh1YRz3ohuCUlcgESOOUH81iZdR1fJ9+zL1Q
+use1Y6nrvLsearR46rHNAQQVw6l14HtyOurJz5USVqs9LynXt8V+ShBAUMHHQfdzFuMsQGqHSW5M
+PQmrVtdsjRCkOwY5gKBiGne3Okg5WJaMqbuw2uX5+P6aX4H8/f922F4AgorlgyD3hp47z3ycPfZf
+p/FSb00BIKjg4kD8/cm4mFNjKfd/OpsJyb2GJ+V+UzEXSK9wAfuvqGr9s7ooHRiV2yYgDCe8xUOp
+gHny2GNjVdwAOzJDRbUYSfnep8srfdCOWV6tr225ztzt3PpxiTRgdGaoAAAEFQBAX075sbS7C6dH
+OJU0w8/ocQEIKjY2w0F71bAQTMBOnPIDABBUAAB9OeXHY36tCAD8ZoYKAEBQAQD05ZQfl3xSCwDu
+maECABBUAACCCgBAUAEACCqgiRDczwtAUAFZMfXr3wEQVEBkTIkqAEEFFIgpUQUgqIACMSWqAAQV
+UDCURBWAoAIKBJKoAhBUQIEwElUAggrEVBhjGQAIKtg2pkQVgKACMTX4MgEQVLBNTIkqAEEFYkpU
+AQgqYKzQEVUAggqWdBxrrgsAQQVDRdWTECqxDAAEFSwZVTEhVGIZAAgqWCqqUkKoxDIAEFSwRFTl
+hFCJZQAgqGCJqOq9DAAEFQCAoAIAEFQAAAgqAABBBQAwibdNAECqcPKLJo8fH1cNN7+U8up7jpOP
+v6as//PvPr+/xPpTlsEazFABUDSmnsRTie/pvX74ZIYKgKz4+J55+fu7EMLPWZmU2auY9YsjejBD
+BUDRmDk7pdZq/Vf/P2bZT7/2OI7/rU/ICSoAiHIVLS2uFyq5Dtc3kcspPwCairmQvHUghhBOT1U+
+eQx/fyfQBBUALBNrtcPmc/l/QYagAoDqYi9ib/2zPZ2l+hVw7Ms1VAAkKXXbgpIXkH9eIF7r8T15
+bEJLUAHA4wD6FQ5PPoVXc/0ll3/3db/+sCen/ABIio7PU3U5YfIdY0++78n6RzPqxfiUYYYKqh94
+rv/AzFGV8nelouLue3JC5e5XzTx57E777SUcsa+4zxeIo8HlOw/vOgBwLBlqA1drGDNUAACCCgBA
+UAEATM2n/CpyQSIA7MEMFQCAoAIAEFQAAIIKAGBnLkovxI3XAGBfZqgAAAQVAEBfTvlBbXf3I3O6
+GGB6ZqgAAAQVAICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIK
+AEBQAQAIKiBFCGMsAwBBBVPHVE4QlVgGAM29bQIoGFOf/30c7ZcBrV/zd6/Rq6/7fs1/fs3T5Z+9
+AckZO2dvaL6XeffGJ/XxpPxspdZ59ZzkbKve278BM1RQOqaeDvbSy4CW/g5WV6/RUhHRcuwYc2W2
+VY3tP/hzY4YKar5bfLIDeLIMM1WsOnaOI/9AeTZzETt2YmbTrtbfMmhH2PfFbq/Syxxk/2iGCmrF
+1Kzrgplez78OpjUOsDu8qfkMyqsZyLvwSdleNZYpqGASLQe3GSpGHgNXB92r1+6or+sQvInptV+a
+eF/nlB/kDv7aO14xxUpahErqOr7Hc+yF9y3Hbul13l27NPJ+aJBTgYIKRo4qMcXK46b2wTVlHb9m
+3VpcXD/i85Kyb4v9lGCvZQoq2CiqxBQzvfY/ZzHOAqR2mOTG1JOwanXN1ghBunucR3INFYw4qMUU
+K/sLsO9rlXKuXSoZU99jcfXxmPpp5LP7f5W+B9Ukz4GggtGiSkxBn5ja/UL0v3D5/nO1jyq1zWos
+szGn/KDGTinnoliY9TV/FzZnr++U+z+dfcIw93qblPtNxVwUvcIF7N/7uZJRlbLMQS5KN0MFtQ4w
+YgrWGberjs+Y21vExmqN/eDAz0M4jsifrtZ5alh5ZyWmAMbaJxfe75qhgl7veMUUwDIEFfSMKjEF
+sAQXpUOrqJrk5nSwpLvT7yOMxxl+Ro9LUMFQUSWmoP348zN6XIIK7FgAWDWo/DZuAAAXpQMACCoA
+gM7iT/m5BgQA4P+YoQIAEFQAAIIKAEBQAQAIKgAABBUAgKACABBUAAB7+hfHbDX87cMFJQAAAABJ
+RU5ErkJggg==
diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml
index 3bc8a61..c7a4ca5 100644
--- a/Documentation/DocBook/media/dvb/dvbproperty.xml
+++ b/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -163,14 +163,16 @@
 	<section id="DTV-FREQUENCY">
 		<title><constant>DTV_FREQUENCY</constant></title>
 
-		<para>Central frequency of the channel, in HZ.</para>
+		<para>Central frequency of the channel.</para>
 
 		<para>Notes:</para>
-		<para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
+		<para>1)For satellital delivery systems, it is measured in kHz.
+			For the other ones, it is measured in Hz.</para>
+		<para>2)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
 			E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
 			the channel which is 6MHz.</para>
 
-		<para>2)As in ISDB-Tsb the channel consists of only one or three segments the
+		<para>3)As in ISDB-Tsb the channel consists of only one or three segments the
 			frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
 			central frequency of the channel is expected.</para>
 	</section>
@@ -334,9 +336,10 @@
 		<title>fe_delivery_system type</title>
 		<para>Possible values: </para>
 <programlisting>
+
 typedef enum fe_delivery_system {
 	SYS_UNDEFINED,
-	SYS_DVBC_ANNEX_AC,
+	SYS_DVBC_ANNEX_A,
 	SYS_DVBC_ANNEX_B,
 	SYS_DVBT,
 	SYS_DSS,
@@ -353,6 +356,7 @@
 	SYS_DAB,
 	SYS_DVBT2,
 	SYS_TURBO,
+	SYS_DVBC_ANNEX_C,
 } fe_delivery_system_t;
 </programlisting>
 		</section>
@@ -647,6 +651,18 @@
 			many data types via a single multiplex. The API will soon support this
 			at which point this section will be expanded.</para>
 	</section>
+	<section id="DTV_ENUM_DELSYS">
+		<title><constant>DTV_ENUM_DELSYS</constant></title>
+		<para>A Multi standard frontend needs to advertise the delivery systems provided.
+			Applications need to enumerate the provided delivery systems, before using
+			any other operation with the frontend. Prior to it's introduction,
+			FE_GET_INFO was used to determine a frontend type. A frontend which
+			provides more than a single delivery system, FE_GET_INFO doesn't help much.
+			Applications which intends to use a multistandard frontend must enumerate
+			the delivery systems associated with it, rather than trying to use
+			FE_GET_INFO. In the case of a legacy frontend, the result is just the same
+			as with FE_GET_INFO, but in a more structured format </para>
+	</section>
 </section>
 	<section id="frontend-property-terrestrial-systems">
 	<title>Properties used on terrestrial delivery systems</title>
@@ -721,14 +737,10 @@
 			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem>
@@ -767,7 +779,8 @@
 	<title>Properties used on cable delivery systems</title>
 	<section id="dvbc-params">
 		<title>DVB-C delivery system</title>
-		<para>The DVB-C Annex-A/C is the widely used cable standard. Transmission uses QAM modulation.</para>
+		<para>The DVB-C Annex-A is the widely used cable standard. Transmission uses QAM modulation.</para>
+		<para>The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It supports a subset of the Annex A modulation types, and a roll-off of 0.13, instead of 0.15</para>
 		<para>The following parameters are valid for DVB-C Annex A/C:</para>
 		<itemizedlist mark='opencircle'>
 			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml
index 61407ea..aeaed59 100644
--- a/Documentation/DocBook/media/dvb/frontend.xml
+++ b/Documentation/DocBook/media/dvb/frontend.xml
@@ -45,8 +45,8 @@
   </row>
   <row>
      <entry id="FE_QAM"><constant>FE_QAM</constant></entry>
-     <entry>For DVB-C annex A/C standard</entry>
-     <entry><constant>SYS_DVBC_ANNEX_AC</constant></entry>
+     <entry>For DVB-C annex A standard</entry>
+     <entry><constant>SYS_DVBC_ANNEX_A</constant></entry>
   </row>
   <row>
      <entry id="FE_OFDM"><constant>FE_OFDM</constant></entry>
@@ -63,6 +63,10 @@
 <para>Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described at the above, as they're
 supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET_SET_PROPERTY</link> ioctl's, using the <link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> parameter.
 </para>
+
+<para>The usage of this field is deprecated, as it doesn't report all supported standards, and
+will provide an incomplete information for frontends that support multiple delivery systems.
+Please use <link linkend="DTV_ENUM_DELSYS">DTV_ENUM_DELSYS</link> instead.</para>
 </section>
 
 <section id="fe-caps-t">
diff --git a/Documentation/DocBook/media/selection.png.b64 b/Documentation/DocBook/media/selection.png.b64
new file mode 100644
index 0000000..4161865
--- /dev/null
+++ b/Documentation/DocBook/media/selection.png.b64
@@ -0,0 +1,206 @@
+iVBORw0KGgoAAAANSUhEUgAABIsAAAHpCAYAAAACi7yYAAAAAXNSR0IArs4c6QAAAAZiS0dEAP8A
+/wD/oL2nkwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAAd0SU1FB9sLCBAiCLMGMtAAACAASURBVHja
+7d3rkds4FgZQaMohTBY7ObRCV+fgyWJy4P6wJavVIgmSAIjHOVWu3bElPkBSAj5dgpdpmqYAAAAA
+ACGEvzQBAAAAAHfCIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMDDD00A
+21wul9XXTNN0aHnP749Z39o2rK0jRzssLX/pvVve9+61S69Jdey2bn/sMTx6TAAA/cIW+oVb+2tb
+3p+izwioLIJsHYe9X+a979vae89ut6Pb1+txBwD0C3vZN0ERrFNZBAct/ZJxuVx2Vdg8v+/oLyEx
+69j7xbq2/1u2e0u75Th2Mevf8ytVzDkDAOgXjtYv3LquVP0nQRHEUVkEBTsJve/r0hfu2hdz7e0W
+27HQ4QAA9Avr7BcJiiCesAhO+GKK/YIt8SV+RscoNmippUPl1jIAQL/w3PUc7Y8JimAbYRGc9KVY
+Yu6b3OsYNUTRuQAA9AvL9AtT9LsERbCdOYsAX74ZOiVbO1M6LQCAfmH7/TzohcoiqOhLK+eXV4p1
+xP4y1krF0X1bn7dXBwIA0C+ss19oagAoR1gEJ4j9osv5iPq965imKUk59eidwNc/AIB+oX7h/HpK
+tzeMzm1oQJIv7Ra/eO/7sOWxtgAAtN0v1N+DdcIiyPQFlPP1JbZpTyehl19q1joQOhgAgH7hOf3C
+Pct9tz36c7DMbWhQwPMXUYkOQ6517P3Sj/216axJEdfWoyMBAOgXpukX5uqv7Xm/W9JgnsoiSGxr
+4FHiiyvlOu7v21pu/PqLzuuvOTHtlmIZW/bz+f1r6177ewBAv1C/8FwqjCCesAgSdwK2dAh63e+5
+fX8XuBxtt1SdkZhy6djt37vNOioAoF84Sr8wV39tzzIERvCd29Agg7knQ8T+unTk15mc64j5El17
+KsbRW75inrqR6glj79rELWsAgH5hmn7hmcckpt8HI7tMRjYAAAAA/KayCAAAAIAHYREAAAAAD8Ii
+AAAAAB6ERQAAAAA8CIsAAAAAeBAWAQAAAPAgLAIAAADgQVgEAAAAwIOwCAAAAIAHYREAAAAADz80
+AQAAqVwuF40AABWbpmn1NbvDIh0BAKDGzg3n0T8EgD7sCot0BAAAmDNNUwj6iwBQlS3fzIduQ7vd
+blobAMjuer1qhKZ6o4IiAGiZOYsAAMji0w+LAHC6jx0/unkaGgAAAAAPwiIAAAAAHoRFAAAAADwI
+iwAAAAB4EBYBAAAA8OBpaAAAFDf3ZJa5J6htef3za5eeyDb3urWnxsQuM/V7jmxX7Dr3HIMUbfj6
++qXjurZ977Zja1vuaVOAnqgsAgCgqKWB+rt/2/r6s7Z/z3aesf0x+1fjdgFQjsoiALpyfRng3J5+
+Fb7/2+3NL8Xv/m1pWa/veX7t/XXXN4OtuWXs+fe59c/t45H2erd/Mdu/9XX0b63q5zWkWHr9/d8+
+rtfFapOY9byz9L7X5e7ZzqVKmT2VP3ts2cc966+1MmfuGKkkAvhFZREA3XgON94FNnMhzlJQNLes
+1/ffX/f62ue/fw1d3r3m9d/nlhu7/rX22rv8LW20d/voT8ztYbEBzNJrS4YMubbzzNCidLs+BzX3
+datsAjiXsAiALrwLfPYGE1uXtaVK5l2YNLes2OXurdI5svwtbaSKiFdbg5Cl18f821y1UupAZu92
+1njblwobgLG5DQ0AZqSofjkSnOSuvsmxf2fsB5SUMtT5vN2+LC82xNoziXaJNthyO11MBdHS7YUA
+5CUsAmAo91u97rdGLc1jdKQi5t08QiH8uSVrTcwcSkekWv7avuTeD1hzD2TuwcOWqqIS8wa9C01G
+nD/neV9fQzQAyhMWAUAma5NVA23KEeLMhUZHJ5g+e/9jXyscAqiLOYsA6MK7+XLW5gWK/fdnsYHP
+2uvWJtveu969ti5/bxsJzNgTDOx5JP2z1yAmNsC4T7j8+ifXdj6vs7VjlGsdQiSAc6gsAqAbz7eY
+Pf9dqmVtWd7cbWivE0LPbe/rv80tL1Vb7Vl+TBvl3g/a8nx70dIj7e9/v/b6mKer1bBfc9tZ65w8
+pdt1bh1zQdFaGwNw3GWapmnzmy6XQx1wAIAt7gHTjm4LJTuWv/uI084QYC482Pv6LfMSvXtc/Nag
+pNR+xb7+yLYeXX9MG669ZunYpN7mEeeJAsZx/4y7/P7vmP6U29AAAChq6yPm9z6S3n7t34/c648J
+Z97N49TKuQDQOpVFAED1VBY10rGMrCwCAMpRWQQAAADAIcIiAAAAAB48DQ0AADqSciJsAMYkLAIA
+gI4IgwA4SlgEAADAZh9/X9/+/ed/t8Ovf37t3PKWXje3rq3LTP2eI9sVs961969t59r2LbX16zJi
+t+Xzv1vyduE4YVHpD9SZsuDnX4COlA7HLD/Ferase2lZW7Zh6/a+vn6pDda27912rK0vVbsCAEB1
+45qFwf3H39dNIcm715fY/rWQKsV7Wj5me93Dn6VlxgZKnEdYVPLiXAgTPq7X6BBh7rWpln/kPWv7
+LigBAIDGxzUrVT+vocTS6+//thYs7A1plt73utw927kUeixt3xnhWEybzO13qe0VHtVDWFTq4nwK
+cmKDni2B0NLy7/82F/4srWdPYLRneVvWUWvgNNfuAjIAALoZ10TcHhYbwNz/LiYwStpvf3PbU47t
+zL0v727/WqvqijlmEEIIf2mCAh+oK0HR0UBhbflbbuVKsT1ry4vdhhRt/nm7PdZdYr0AADCCreHC
+0utj/m0u3EkdcuzdzntQ09MxS7Gud23iFrQ2qCwqeXFmrjBZWv7n7XZ6WFLDNgAAAGNLGeq8Vilt
+ndz53fKO7sMZc0DlPjaCpfKERTVfKBsmqy617hr2de21qeduAgAAzvM6YfKWypQS8wa9q6IpVT3z
+vPyYp4pBLGERu55i1sSXytO2q2oCAAAe44MMIc5caDQ3B1KSsVzF4dC7p6KthWgqiOohLKr5A2zj
+RNW511/LurY8NQ4AAEhv661OMY9RXxwDPAUP9/+OGjtsDB+ObufzOnMFOTHLnZvoWhhDLBNcl/xA
+PRherIUka7dfLS333Z/a9j/VOoRIAACwc0wy86SzL/3tmadvLU12/Pra2vZryz6V3OZ3f44eMwhB
+ZVGZi/jpFqi5qqAj1UJry495Gltupbdhbh1zQdFauwEAAL/72i+PkU/x+hoeRb93O/fMi1R6Iuet
+xyz1emNDQRNc10NYVOoieQl0jnoNN2KWXyoo2jMH0lnbfKTdzm5nAAA4bXyzMJnyXHVLC0FA7fsV
+cxveu7mCWjoG1EFYVPKDZ2GS5diAYW0ZtQYYJZ/gtrSuexs9h201txsAAFQ7vtkYMGx5/dHXHgk/
+atmvI+9PNYF0ioqvGqrG2O4yTdO0+U2XSwghhJuBNABQwPV3qL+j20LJjuXvPuL9KPnRBWCbtVvE
+hCrsOq9+96Muv/87pj+lsggAAKDFAeBLsCBIaJ9jSC2ERQAAAB0QHgGpCIuI++JZmZRbmTkAAFTW
+h98QHn1cPzQYFPR5+6x6+4RFRJ7IN40AAAA19dGfwp+Yx6HHPr4cQFgEAADQuNfwZy08inkEOzAu
+YREAAECjYiqKdvl50bg04Ujg+Xr7Ze5bw1q63VNYlPzgXzUCAP13zNyeDJB/bJErCAKKB0WtERYB
+AACcNWA9IRBy6xnDX3eColXCoowUbgLQk0kTAMQPRguFQItPOHuzDXuCoss/jieV9Ul+Hrg2TwqK
+WnvioLAIAABgy6CvgiBoz/apKGL4a1dQFE1YBAAA8DywK3hrWOoAJ1U1EXR3XQuKNhEWAQAAYwwW
+Gw6B9u6foAgERXsIiwAAgLYHgoUnia4tgBESwcL1UUlQ9Hn7bCo8EhYBAAB1DvJOenR860GLoAh+
+f4ZUFBS1RlgEAACUH8R5ZLx9hJyfMYKiQ4RFAABAuoGSEMj+w9mfQ4Kiw4RFAADA+iBICAS08Fkl
+KEpCWAQAACMPrMwLBPTyeSYoSkZYBAAAPQ6ahEDASJ95gqKkhEUAANDaoMgtYQB/PhMFRckJiwAA
+oJYBjxAIYNvnpqAoC2ERAADkHlQIgQDyf+4JipIRFgEAwN4Bg3mBAKogKEpLWAQAAK+DASEQQDME
+RekJiwAAGIpbwgD6ISjKQ1gEAEAXhEAAZPl+GSwoCkFYBABA7Z10IRAAZ30HDRgUhSAsAgDgrA64
+eYEAqPl7atCgKARhEQAAR/17CSGEMP186WSHa9HNEAIB70zTNMy+Xi4XBzyRkYOiEIRFAAAs+ff8
+gYcQCICSRg+KQhAWAQCMSQgE0J25KioVR/EERb8IiwAAenJGCPS/6ctgZHp0sG+OB0AFXkMk4dF7
+gqI/hEUAAC04qxLof5O2B6B7gqKvhEUAAGcSAgFQ2HOlkSojQdE7wiIAgFxOvCUMAFgnKHpPWAQA
+sJUQCIBOjFxlJCiaJywCALgTAgHAEARFy4RFAED/zAsEAKvuVUa9VxgJitYJi6DmD+uf7//+8s/6
+a969ds/yU6xn636uLWttu9e2dakdX5cRuy2Xf/K2ETBDCAQAbHBWUPS63toJi6BSS8HD9DM+eJh7
+barlH3nPme2y5h7+LC0zNlACdnaq/r5+v/Zzh0NCIADotsJIUBRPWAQ1fjg/BSKxQc+WQGhp+fd/
+mwtJltaTOzCKbZe5fSoV6giPYKXD9BQCFSMEAoCx+x+Cok2ERVCZtUBk6e9TLP/5dqrY8CfmFqy1
+7Xm+/evdenO3C5CgMyQEAoC+xibT1EV1kaBoO2ERVCp38LG0/CPhT+vt8q4dlsIrARVDdBTffB58
+hGv29X7+d3v8/+v1+ui0AgDEqiUo+rx9NhUeCYug48FcCOfPI7T3faXmQOrtWECJa/eo5xAIAKi8
+v9Dw/EU1BUWtERYByQaXe8OQ5/fVXNUEvVyruQiBAIBaCIqOERZBJ7ZOVJ17/bUParfs1+utaGu3
+oKkgIqczrpfHuf+l43NzMABgpD5IQ/MXCYqOExZBxQPCI6HDWoVOzCPhlwaNJQa8c3MFCWPo9Zov
+zbUEAPRGUJSGsAgqE/M0siOBydryY546VmKw+jpwzt0ukMtZlXOuBQAgeb+m8uoiQVE6wiKo0Gsw
+kmKwOjcvUEuTMadul63rjQ3STHA9SGdJCAQAUA1BUVrCIqjU0m1ksYPFtWWcFWrEPHZ+7rH1Z243
+43BLGADATD+pwuoiQVF6wiKoWMzgce01a4HMGQPZLWFXim3J3Y4G+w11boRAAABdERTlISwCoHlC
+IACAgn2v6dczUmurMBIUpSMsAqDejoh5gQAAiCAoSktYBBQf4BuIIwQCACAVQVF6wiLAgJyk3BIG
+AEApgqI8hEUARBECAQDwpX9Y4ZPRchgtKApBWATgS14IBAAAb40YFIUgLALolnmBAADI3ufsuLpo
+1KAoBGERQHtfyEIgAADIauSgKARhEUBV3BIGAEBzfdjOqotGD4pCEBYBlPkCFQIBAED1BEW/CIsA
+DhACAQCMpbYKmmmaqtmO1quLBEV/CIsA3n3ZmRcIAACGISj6SlgEDEUIBABAT16reWqpNGqJoOg7
+YRHQDbeEAQAAWwiK3hMWAdUTAgEAQGQ/9qnSqHSVUWvzFgmK5gmLgNMIgQAAgDMIipYJi4DkzAsE
+AADnu1f5mMfoK0HROmEREE0IBAAAtOysoOh1vbUTFgEhBLeEAQBAr0pWGNU8b5GgKJ6wCDonBAIA
+AEYnKNpGWASNEgIBAACb+vODzmEkKNpOWASVMS8QAABAGrUERZ+3z6bCI2ERFCIEAgAAanC5XLJW
+F9Uyb1FNQVFrhEWQ+oOxUCgkBAIAAHaPJzIHRmcTFB0jLILaPrSFQAAAALsJio4TFkEhQiAAAKCq
+MUqH1UWCojSERZD6A1coBAAAUJygKJ2/nE4AAABASqUrlgRFaaksghQfhD+1Af1QHQcAQEsERemp
+LAIAAIBB1fCI+yMERXkIiwAAAIDmCYrScRsaJOYWHlrkVkoAgIHHMB08FU1QlJbKIgAAAKBZgqL0
+hEUAAABAkwRFeQiLAAAAAGaMFhSFICwCAAAAeGvEoCgEYREAAADAN6MGRSEIiwAAAGB4l8sl+TJb
+fsLayEFRCCH8cEkAQJkOTo5OGAAAaY0eFIUgLAJgcCV/8VpalyAJAOB8gqJfhEUADKPmUuh32yZA
+AgAoR1D0h7CIrgduBlp9DqqdM4xyHj9vv3MTACAfQdFXwiKAmcH5K4P19o9hT/vlfAQASENQ9J2w
+iO4HjQZUGKyPeXxG2V/nIQCQyuVyGa5PJSh6T1iEgR0kOIcN2H2OOA8BANoiKJonLAIwYG+6vfne
+Ls5BAIBlgqJlf2kCeh/oGVRyxvntvNO22gkAoE6ConUqiwAyDthDUOWRsi1xDgIAHHFWUPS63tqp
+LAIoMGAXdhxrP5yDAABHCYriCYsYYuBnkIQBu/ZCmwIA4xIUbSMsAjhhwI42Ort9tTEAMApB0XbC
+IoYZABoY4Vpoo120jfMQACCVWoKi1ibRFhYBGKhrD+0OANAdQdF+wiKAkwfqBusCCwAA0hIUHSMs
+YqjBoAEp1Pe54LoEACAlQdFxP5xGAOebpilcLpfh9rkVKY6NUAwAID9BURrCIoBKjBQY1Rqc5Gz/
+uWULkQAA0hAUpSMsYriB4YgVHLR1rfR+ftb0eVBDW79ug/AIAGA7QVFawiJgqIH5O7UNznsOjGpo
+69rb9nn7BEcAAOsERekJixhuIN77YJxjg3OD9D4/C1q93gVHAADLBEV5CIsAKhyk9xZonhV09NSG
+giMAgGWConSERQCRg3QD9PaOmXMSAGAMgqJkHc0Qpin85ZQip5oHMgZZ7BmglwwhejlHS+/HSLeY
+lj4nAQBqJChK2nkPIQRhEW0NisAAvbXvmslxse8AgDFcNoKiPIRFGMhCxV9+LZ+jpYMitAMAQA6j
+BUUhCItoZKB4HwAZCGFwPt71v9b+joE2AQDa6sO1ZMSgKARhEUCSwTnaXfsAAPRl1KAoBGERmbSU
+SEvPcY62t72CkPh20lYAANuNHBSFICyikcGOQSKtnaejEhQ5PwEAWjd6UBSCsAjAgFwbD9N22g8A
+YJmg6BdhEcnlmNi6pW0G134egg7tCACQk6DoD2ERBjuAa157AgAMTVD0lbCIpFqu0FFdRM2D8NrP
+z5zbJ9jQrgBAe/25lvoagqLvhEU0O5Ax0IE+OxbU8zkLANA7QdF7wiIAqiXM0MYAALkIiuYJi0im
+xYmtc+4DBt+ue+0IAECdBEXLhEUYlAMAAAxstB/NBUXrhEUAVNepEAQDAJDDWUHR63prJyyiukHj
+1kFi6kGlW9HgXIIiAAD9uRwERfGERQAAAEDXBEXbCIs4rMdKHNVFcM41oqoIAMDYJzVB0XbCIqqy
+d6BogAkAAMCrWoKi1ibRFhYBsImqIgAA/boW+nSCov2ERVTz4VLbQNGtaAAAAG0SFB0jLKIbqhLA
+9QsAQJyefxwXFB0nLIJBP0BpSy1himsCAICaCYrSEBZRxaAx1UBYdQK9XRsAANBKf/Xs8ZigKB1h
+EQCnEvICAHCUoCgtYRG79Dyxdc59Bdc9AABn9ud67NMJitITFtEdVQoAAABjEBTl8cOpBZBOjl9q
+eg5AhbsAAG32UWvs1wmK0lFZxKkfNLk+UFIv1+03AAAA9RIUpaWyCCCRnkNFgSkAgD7cnLOrigRF
+6akswoDRvlMxt2kBAMA8QVEeKovodhB8uVwEPBTjXKvvMwAAQL9Uny6F0YKiEFQWAVT7hSxMAQCA
+c40YFIWgsoiTBsSlBsGpq4umaTKAJ9t1AQAALfVHex8bjRoUhaCyCKDKL+aavngFYgAAjGbkoCgE
+lUUAmwlPjlOhBwDoC+rP1Wr0oCgElUWc8IFY+kMl9fp8OYx9HZQ4/oIUAAA4h6DoF5VFACtKBoSC
+IgAAatdrn1VQ9IewiKID5V4+VEx07bz3pQsAAP0QFH0lLGIIqZ+KRl9qODcERQAAtDK26o2g6Dth
+EVCMwG6cL1wAAGiBoOg9E1xTbHB/9oDYRNfUSFAEAEAr/dbe+q6ConnCIoATv3BrJxQFAKBHgqJl
+bkMDKGz0aiLVVAAA+m5nEhStU1nErB6fguZWNM4+/wQlAABwnrOCotf11k5lEUBmAiIAAPRjzyco
+iqeyiLd6rCrKtT2qi5g7z1QSAQBAHQRF26gsAjhIIAQAgL5tvQRF26ksAjhomqYvfwAAgDrUEhS1
+Nom2yiLeDnxTqTWVvlwuBvUUuYZUHQEAUKve+6qCov2ERQAZCY4AAGihr9pbf1VQdIzb0Fj8sDjC
+wBi+X18q2gAAIC9B0XHCIoYlzOIsQiMAAGrup7bcVxUUpSEsAjjxyxgAAEhDUJSOsIgsA9dWqnZU
+F1HDdSc0AgBAP/UYQVFawiKASr6MAQCA7QRF6QmLACohMAIAoMY+as39VEFRHj+c+qQepLZ2a9fl
+ckm6/9M0ub2t4XPj7C9C5w8AAOwjKEpHWATw5F1QUzpAEhgBAFCbe5+41n6qoCgtt6ExdFVRru12
+O1FfLpfL40+L1yUAAPRMUJSesAhgg5LBkcAIAIDa1NZHFRTlISwC2KlEaCQwAgCAc40WFIUgLBqe
+W9Dybb9B/jgERgAAjDaOHKWPOmJQFIKwCCCJ0nMaAQAAeY0aFIUgLCLhQBnIdy2oLgIAoDY991FH
+DopCEBa5sMk60NfGzqPWz6cc++K6AACgZqMHRSEIiwCyUG0HAMAIevshUFD0i7DIBW1QnHl/VFHg
+fAIAgPoJiv744XQAyONyuQh3AIDmTdOkavqlj1fzsXKO7CMo+kplEUBjnQkBFAAApCMo+k5YNCC3
+oJXfL4N7AACgxDjm+U+r48ySBEXvCYsACnxp+zIGAIC6CIrmCYsGo6rovP0zuAfXAwD47qb0mKZk
+lVFL54mgaJkJrvGFAax2MlzvAAD0QlC0TmURQAGeIAIAwNn90RJVRrX/yHhWUPS63toJiwaiMsAx
+wPkEAACjEhTFExYBcAphFwDAOXJXGNXYzxMUbSMsAgAAALolKNpOWDQIv+A7Fpyv5XmLzLkEAOjH
+6p+2eL7UEhS1Nom2sAgAAADojqBoP2HRAPwC4JjgXLL9AAC8U+IJaWcQFB0jLAIAAAC6ISg6TlgE
+QBTzFgEA6OttcUYVuaAoDWFR59zi4diAawEAgBEIitIRFgEAABDFjzx9a7m6SFCUlrAIgFM7EAAA
+cISgKD1hUcek/o4RuBYAANiitR8HBUV5CIsAAACA5gmK0hEWdcqv9I4V5JLr1ybXAgDov+Kc2UtQ
+lJawCAAAAGiWoCi9H04rYpjU9iu/puAz4ZLlOpimyecNAECnfb0cBEV5qCzqkCDDMcNxBgAA0hgt
+KApBWEQEv/IDJQnVAACMA2sxYlAUgrDIIItqPjgdO1wHrgcAMO6AeowaFIUgLAJoml98AAAgvZGD
+ohCERRiIahuK6PXXN9VFAAD01rcbPSgKQVjk4sMxBNeENgYAIIQgKLoTFjFL5Qzgs6JvgiIAfI/A
+H4KiP4RFYJCMjpT2064AAEMTFH0lLNLpx7GkUTWFlbm3xXWhPQEAchEUfScsovpBKBiU+9wYrS21
+IwBAGYKi94RFOv5UOEB2TF2baNMcbaf9AICzxzo1ERTNExYB+OJuarsEHtoMAOAoQdEyYRHNDELB
+4NxniPbVVgD4nsH5cpSgaJ2wyMWGY4tjp507bR9tBADw1VlB0et6aycsAkg8QM+theq/UtsoENEm
+AACxBEXxhEU0NwgFA3SfJ+/aH+0AADBHULSNsMigAMeYho5Ta4Fu6cBo1GtGWAkAME9QtJ2wiGYH
+oWCA7rNl7rg4BwEACKGeoKi1SbSFRQ0PEHCsOW9wfsZxEehuP072DwD0Vxm3Dyoo2u+HUx+g/g5Q
+60HR5XI5pR3v6+whaNMRBwCIJyg6RlhENwMpMCCv/3PmrPZ9Xm9rn3fOSQCAbQRFxwmLDGZpYEA8
+TZPKiMHPKddHnvOwxrZ1nQAA7CcoSkNYBFCxHqv+agiM7l6344z2Fg4B0INeftyk7XNFUJSOsAgf
+6uDaPGXfagxJ5rYpxbEQCgEA5CMoSktY1BiDjXEHwn6tGe8ccp347AUAYJ2gKL2/nFYGpIDr8sx9
+9TkEAMBegqI8hEUN8cu2Ab9zwHljv9H2AADvCYrSERYBGLTbf20OANA0QVFa5iwySABci1W1hQo6
+5xwAwBaCovRUFjXC4MmAzLngHBmpTbSLcw4AIIagKA+VRQAG7FW3kYDUOQcAcKbRgqIQVBY1IcdA
+yaDBOcF5A3bXn88r5xwAQBtGDIpCUFkERQZqwh0M1tO0n2vJOQcAUMqoQVEIwiIAA/YG21No5JwD
+AMhp5KAoBLehVc8taAZvJc8N0h1vt/6UaWO0CQB9j13gDKMHRSGoLAJINlDn3HYfsYPqvAMASEtQ
+9IuwyMACcB11dVxGCI2cgwAA6QmK/hAWVUwZZ3+Du9THdJomg0aDcRaOXS+fo85HAIC8BEVfCYsM
+DnBMnX8Mc821FB65BgFokR8zaZGg6DthEaT+gvypDaBW7zqvNQRIOtUAAOcQFL0nLAJgaEtBTcog
+SSAEAFAXQdE8YREAzBDwAAD0SVC0TFgEKQaU//z637lb0O7/DgAAwLkEReuERVBAzDxGAiUAAIC8
+zgqKXtdbO2ERVGItUBImAQDQRL/WE9G6O569EBTFExZBQnOBToonpKlOAgAA2EdQtI2wCAqICXEE
+SgAAAOkJirYTFkEl1kKcFGFS7HIESgAAHOpzuhWNStQSFH3ePpsKj4RF0IhS1UkxyxEmAQAAtasp
+KGqNsAg64nY3AACg6jFLoYozQdExwiIY7cPZ7W4AAEDHBEXHCYuAL2q63S12ewAAgPSmaWpumwVF
+aQiLgM3MnwQAANRGUJSOsAjIwvxJAABj80Q0ShIUpSUsAk5j/iQA8i3Z/QAADThJREFUAOAoQVF6
+wiKgWm53AwAAlgiK8hAWAU1zuxsAABCCoCglYRHQPYESAAD0TVCUlrAIIJg/CQAAWiUoSk9YBBDB
+/EkAADv6NZ6IxnM/NsO5ICjKQ1gEkOrLz+1uAADQndGCohCERQBFCZQAAGjBNE0aIYwZFIUgLAKo
+jvmTAADgfKMGRSEIiwCaY/4kAKAl5i1q85iNbuSgKARhEUCX3O4GAAD7jB4UhSAsAhiW290AACjW
+92ykukxQ9IuwCID3X+gV3e4Wuz0AALCXoOgPYREAu5k/CQCgL6POVyQo+kpYBEBW5k8CAKBmgqLv
+hEUAnM78SQDQN09Ea+c4jUZQ9J6wCIDqmT8JAIDUBEXzhEUAdMH8SQAAB/o3g1UVCYqWCYsAGIb5
+kwAAEBStExYBwBPzJwEAI1FR9HnKemsnLAKADdzuBgDQJkFRPGERACTmdjcAePO95YloVR6TIn2j
+Co67oGgbYREAnECgBABQhqBoO2ERAFTK/EkAQA4jzVNUS1D0eftsKjwSFgFAo86cP+kjXL92gP67
+OSAAQFVqCopaIywCgI6VCpQ+/r6uvkagBIB5i85t+1P6Iicdb0HRMcIiABhcqdvdBEoAQAmCouOE
+RQDAonuYNH3p/Ny+do4igqCoTtbMch6B1b+XEP43OSgAEOHsuYnOqCoSFKUhLAIADoupCEoVKIV/
+VzqewiQAGJKgKB1hEQBQRLFA6d+IXzEFSgB0aKSnnH3rQwiKkhIWAQDVmAuUrtfrr05wovmTBEoA
+0A9BUXrCIgCgHTEBzr+J5kcQKAGEEH7NO5OyYqX1J6KNXL2z9bwpQVCUh7AIAOhLTYGSMAkAihEU
+pSMsAgDGUypQUp0EwIDOqBwTFKUlLAIAeGctxHG7GwBUQVCUnrAIAGAPt7sBwDelq4oERXkIiwAA
+cnG7G9BRAGCSa2LOkx6NFhSFICwCADiXQAkAqjViUBSCsAgAoH7mTwKgcj1WFY0aFIUgLAIAaF8l
+8ydNP0O4/ONwANC+kYOiEIRFAABjKBQoTT+fOtrhGvWez/9ujg80wLxFLJ0bPRk9KApBWAQAwF2p
+291eO+V/X1dfI1ACoARB0S/CIgAA4qyESZfL5UtlUdLOu0AJoEo9VRUJiv4QFgEAkG7Q8E8I06OT
+fYvrnEcEQSmWI0wCYPY7RFD0hbAIAIBTxYQ4KQIl1UkA6ago6puwCACA6q2FOKWqk2K2BYB2CIre
+ExYBANC8UtVJscsRKNErT0Tjfh70QFA0T1gEAMAQagqUhEkA5xIULRMWAQDAfbBg/iSAWSqKxiEs
+AgCADcyfBNCus4Ki1/XWTlgEAAAJud0NtjFvUf1UFKVdbwuERQAAUJjb3QDKEhRtIywCAIAKCZSo
+VeonolH3se6BoGg7YREAADTK/EkAK59flQRFn7fPpsIjYREAAHTK/EnAXj1UFdUUFLVGWAQAAANz
+uxvQI0HRMcIiAABgkUCJV6nnLfJEtHqOaw8ERccJiwAAgMPMnwTUQFCUhrAIAADIzvxJUKeeKroE
+RekIiwAAgCq43S3xAPZpPwVk9E5QlJawCAAAaEYNt7u1GLx8/H0VGNHtvFCCovSERQAAQDdKVCe1
+WpkkMKJHgqI8hEUAAMBQSlQn1TBv0ud/t2/bkTIw8kS0Oo3choKidIRFAAAAzwO/CsKkmO2I3Zec
+gRFUc90KipISFgEAAGwZlJ44b9KekCdnYNRCFYtqpQGuSUFRcsIiAACAlAPXjPMm7b29TYUR3V5v
+gqIshEUAAAClB7iZAqWt74kJjKafjhdjGy0oCkFYBAAAUKV3IU6qW9y+L3PS4PDu+hgwKApBWAQA
+ANCMUvMlAeMGRSEIiwAAALqR6va2PXMZnTWwtl7r7Wm9tRAWAQAADCBn1ZEgwXqtty/Coozc9QsA
+AJwt5glqHwb01mu9p663NsIiAACAzsQERAb01mu9day3RsIiAACATpQKiUYc0Fuv9Y5EWJTY5+2m
+EQAAgHrGKAkDolEH9NZrvaMRFgEAAHQoR0g04oDeeq13RMIiAACATuQKiEYd0Fuv9Y7qL00AAACA
+Ab31Wi93wiIAAAAM6K3XenkQFgEAAGBAb73WW3C9tRMWAQAAYEBvvdZbaL0tEBYBAABgQG+91ltg
+va0QFgEAAGBAb73Wm3m9LREWAQAAMEuQYL3W2856UxEWAQAA8JYBvfVabzvrTekyTdO0+U2XSwgh
+hNvt5tMTAMjuer2GEELY0W2hZMfydx9xenSO9RWhFS3fLgMtKhkgffzuR11+/3dMf0plEQAAAAAP
+wiIAAAAAHn5oAgAAgLG1OKcKkI/KIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwYIJrAAAAivq4
+frz9+7mJtre8/vm1SxN3z71ubl1bl5n6PUe2K3adW4/DWvsfPb5737PlmJrc/T2VRQAAABSzNHB/
+929bX3/W9u/ZzjO2/+gxOrrcrcve856alt8qlUUAAAAUsVb18zpoX3r9/d8+rh+L1Sdbq19itu91
+uXu28/73qapz9tiyjyWWneo9Z+xvb1QWAQAAkF3M7WGxAczSa3Pac9vbnu08M7RYu+3r8/b5eM3W
+dj/aFjmO8xnnUQuERQAAABSzNQhZen3Mv81VK6UOZPZu52i3Qe1p99zhmYqi79yGBgAAABFShjqf
+t88vy4sNsfZMon10H9fmYzozbMndHqMSFgEAANCleyBzDzS2VBWVmDfoXfVTrsqnFPv4/HevYRd9
+ERYBAABApBwhzlxodHRC59T7WGM4pIIoD2ERAAAAxWy9bWntaWdrnquL7v8dY2sIcXQ7n9d55oTd
+e7Z9yzHds2+520OF1HcmuAYAACC7mKdOzT1ZbG0enVqeHrZlO1sLKO5PQXv9s8WeY5b7ONdyHtVG
+ZREAAABFPM9zs6UqaOn1MQP8Ek/T2rOde+ZFamVC55T7lqo9SsxD1QuVRQAAABSz9RHzex9Jb7+O
+i7l1b8utc3uqkfa8p6blt+oyTdO0+U2XSwghhNvtpgUBgOyu12sIIYQd3RZKdix/9xGnRwdcXxEA
+zvbxux91+f3fMf0plUUAAAAAPJizCACA09yrxl7NVbBvef3za5cq4udeN7eurctM/Z4j2xW7ztT7
+eH/t2nGda//YZS7tz1q77DlmAL1SWQQAwCmWBvbv/m3r68/a/j3becb2x+5jDccixTLn9qXm9oc9
+Pq4fi38gRrHKopikvvQvG3vWs+fLxS8yfpEBAOb7DDH9taXX3//ter0u9pP29AvXtu91uXu2c6mP
+d6RftsWWdR89FiXsOWZ7zw+ojcmaSaFIZVGqXx5S/nqzd3v37r9fZAAA1sOGd3+/9votPz6msue2
+tz3bWWvgcsaxOLq81tof4EzZK4u2/mq05XVry1/7ZWPLLw4pvlBTbXcNHQS/yAAAOfoae19/u90W
+K5zvP3jN9V9S9lf2budaFXlpe6uacrRnquW11P4AZ8paWbT1V6PUy6/h1wO/yPjCBQD6kzNcWqrk
+fve61z9792duOTX05e7bkONHyL3tD9CzIreh5f6CWftlo9aORMntzn1Puy9XAKBmr2HDliqSEkHK
+7XYTWpx8fmh/gD9+1LhRZ06SfOQLodQEhEe+BN+VYKdc9mtbqCoCAHqVo5/zroJmy5QKqfclV9+x
+tr7snvYH6NmPkXe+9nCn1Q6T0AgAiO2LbekjrD3tLKav8lwtErvuPU/KPbKdc/2qVo5diW0+crtd
+D+0PkNtfNW7UvQz0tRz0zKdb7Nnu5+2v5YumxPbMlfECALz2tbY+DGTtCbO1PBxky3a21E86eiy2
+PiE4VT+9l/YHKKVIZdHR0s21JyDs/WWjhvmM/CIDAIzouX+3pSpo6fUxfbsSc2nu2c49fdaUUzds
+DWy27mOq45dif1K1P0DPslYWbf3VKPXya3uKQ6rt9osMANCDrQ/7qPmhJr3u17uK8b3bnGo/j94F
+0Op5BVDSZZqmafObLpdNH55rQcJrBcrWx83HLv/19ak+/Pc+Qn7rdqfc19flbA1+UuwLAGz9rt3R
+baFkx/J3H/F+lD59/wPA6T5+96Muv/87pj9VZM6iFGn93mXU8uQGv8gAAAAALShSWQQAcITKokY6
+liqLAKA6eyqLfmg2AADoj2kCANhLWAQAAB0SBgGwl7BohV9kAAAAgJEIi1YIgwAAAICRCIsAAMji
+Y6VCGwCo01+aAAAAAIA7lUUAACR10QQA0PZ3+TRN0+Y3XXQBAIDydnRbKNmx1EcEgC76UyqLAAAo
+1vkEAOq3KyzSEQAAAADokwmuAQAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA
+AA/CIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA
+AA/CIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA
+AA/CIgAAAAAe/g/10lQlA3JSSwAAAABJRU5ErkJggg==
diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml
index afc8a0d..cea6fd3 100644
--- a/Documentation/DocBook/media/v4l/biblio.xml
+++ b/Documentation/DocBook/media/v4l/biblio.xml
@@ -178,11 +178,3 @@
     </biblioentry>
 
   </bibliography>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml
index a86f7a0..c79278a 100644
--- a/Documentation/DocBook/media/v4l/common.xml
+++ b/Documentation/DocBook/media/v4l/common.xml
@@ -1168,6 +1168,8 @@
     </section>
   </section>
 
+  &sub-selection-api;
+
   <section id="streaming-par">
     <title>Streaming Parameters</title>
 
@@ -1195,11 +1197,3 @@
     <para>These ioctls are optional, drivers need not implement
 them. If so, they return the &EINVAL;.</para>
   </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index b68698f..c736380 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -1082,7 +1082,7 @@
 follow SGI's lead, and adopt a multimedia timestamping system like
 their UST (Unadjusted System Time). See
 http://web.archive.org/web/*/http://reality.sgi.com
-/cpirazzi_engr/lg/time/intro.html. 
+/cpirazzi_engr/lg/time/intro.html.
 UST uses timestamps that are 64-bit signed integers
 (not struct timeval's) and given in nanosecond units. The UST clock
 starts at zero when the system is booted and runs continuously and
@@ -2376,6 +2376,23 @@
         <listitem>
 	  <para>V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to userspace.</para>
         </listitem>
+        <listitem>
+	  <para>Add selection API for extended control over cropping and
+composing. Does not affect the compatibility of current drivers and
+applications.  See <link linkend="selection-api"> selection API </link> for
+details.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+    <section>
+      <title>V4L2 in Linux 3.3</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added <constant>V4L2_CID_ALPHA_COMPONENT</constant> control
+	    to the <link linkend="control">User controls class</link>.
+	  </para>
+        </listitem>
       </orderedlist>
     </section>
 
@@ -2489,6 +2506,9 @@
         <listitem>
 	  <para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para>
         </listitem>
+        <listitem>
+	  <para>Selection API. <xref linkend="selection-api" /></para>
+        </listitem>
       </itemizedlist>
     </section>
 
@@ -2507,11 +2527,3 @@
       </itemizedlist>
     </section>
   </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 3bc5ee8..a1be378 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -324,12 +324,6 @@
 		(usually a microscope).</entry>
 	  </row>
 	  <row>
-	    <entry><constant>V4L2_CID_LASTP1</constant></entry>
-	    <entry></entry>
-	    <entry>End of the predefined control IDs (currently
-<constant>V4L2_CID_ILLUMINATORS_2</constant> + 1).</entry>
-	  </row>
-	  <row>
 	    <entry><constant>V4L2_CID_MIN_BUFFERS_FOR_CAPTURE</constant></entry>
 	    <entry>integer</entry>
 	    <entry>This is a read-only control that can be read by the application
@@ -345,6 +339,25 @@
 The value is the minimum number of OUTPUT buffers that is necessary for hardware
 to work.</entry>
 	  </row>
+	  <row id="v4l2-alpha-component">
+	    <entry><constant>V4L2_CID_ALPHA_COMPONENT</constant></entry>
+	    <entry>integer</entry>
+	    <entry> Sets the alpha color component on the capture device or on
+	    the capture buffer queue of a mem-to-mem device. When a mem-to-mem
+	    device produces frame format that includes an alpha component
+	    (e.g. <link linkend="rgb-formats">packed RGB image formats</link>)
+	    and the alpha value is not defined by the mem-to-mem input data
+	    this control lets you select the alpha component value of all
+	    pixels. It is applicable to any pixel format that contains an alpha
+	    component.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_LASTP1</constant></entry>
+	    <entry></entry>
+	    <entry>End of the predefined control IDs (currently
+	      <constant>V4L2_CID_ALPHA_COMPONENT</constant> + 1).</entry>
+	  </row>
 	  <row>
 	    <entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry>
 	    <entry></entry>
@@ -3329,6 +3342,16 @@
 		  <entry>The short circuit protection of the flash
 		  controller has been triggered.</entry>
 		</row>
+		<row>
+		  <entry><constant>V4L2_FLASH_FAULT_OVER_CURRENT</constant></entry>
+		  <entry>Current in the LED power supply has exceeded the limit
+		  specific to the flash controller.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_FLASH_FAULT_INDICATOR</constant></entry>
+		  <entry>The flash controller has detected a short or open
+		  circuit condition on the indicator LED.</entry>
+		</row>
 	      </tbody>
 	    </entrytbl>
 	  </row>
@@ -3357,11 +3380,3 @@
 
     </section>
 </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "common.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/dev-capture.xml b/Documentation/DocBook/media/v4l/dev-capture.xml
index 2237c66..e1c5f94 100644
--- a/Documentation/DocBook/media/v4l/dev-capture.xml
+++ b/Documentation/DocBook/media/v4l/dev-capture.xml
@@ -108,11 +108,3 @@
 linkend="userp">user pointer</link>) I/O. See <xref
 linkend="io" /> for details.</para>
   </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/dev-codec.xml b/Documentation/DocBook/media/v4l/dev-codec.xml
index 6e156dc..dca0ecd 100644
--- a/Documentation/DocBook/media/v4l/dev-codec.xml
+++ b/Documentation/DocBook/media/v4l/dev-codec.xml
@@ -16,11 +16,3 @@
 I/O.</para>
 
   <para>[to do]</para>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/dev-effect.xml b/Documentation/DocBook/media/v4l/dev-effect.xml
index 9c243be..2350a67 100644
--- a/Documentation/DocBook/media/v4l/dev-effect.xml
+++ b/Documentation/DocBook/media/v4l/dev-effect.xml
@@ -15,11 +15,3 @@
 functions, or through the streaming I/O mechanism.</para>
 
   <para>[to do]</para>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/dev-event.xml b/Documentation/DocBook/media/v4l/dev-event.xml
index f14ae3f..19f4bec 100644
--- a/Documentation/DocBook/media/v4l/dev-event.xml
+++ b/Documentation/DocBook/media/v4l/dev-event.xml
@@ -41,11 +41,3 @@
 event you want to subscribe to whether this is applicable for that event or not.</para>
 	</listitem>
       </orderedlist></para>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/dev-osd.xml b/Documentation/DocBook/media/v4l/dev-osd.xml
index c9a68a2..479d943 100644
--- a/Documentation/DocBook/media/v4l/dev-osd.xml
+++ b/Documentation/DocBook/media/v4l/dev-osd.xml
@@ -154,11 +154,3 @@
 however the framebuffer interface of the driver may support the
 <constant>FBIOBLANK</constant> ioctl.</para>
   </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/dev-output.xml b/Documentation/DocBook/media/v4l/dev-output.xml
index 919e22c..9130a3d 100644
--- a/Documentation/DocBook/media/v4l/dev-output.xml
+++ b/Documentation/DocBook/media/v4l/dev-output.xml
@@ -104,11 +104,3 @@
 linkend="userp">user pointer</link>) I/O. See <xref
 linkend="io" /> for details.</para>
   </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/dev-overlay.xml b/Documentation/DocBook/media/v4l/dev-overlay.xml
index 92513cf..40d1d76 100644
--- a/Documentation/DocBook/media/v4l/dev-overlay.xml
+++ b/Documentation/DocBook/media/v4l/dev-overlay.xml
@@ -369,11 +369,3 @@
     <para>To start or stop the frame buffer overlay applications call
 the &VIDIOC-OVERLAY; ioctl.</para>
   </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/dev-radio.xml b/Documentation/DocBook/media/v4l/dev-radio.xml
index 73aa90b..3e6ac73 100644
--- a/Documentation/DocBook/media/v4l/dev-radio.xml
+++ b/Documentation/DocBook/media/v4l/dev-radio.xml
@@ -47,11 +47,3 @@
 &VIDIOC-G-MODULATOR; ioctl
 reports the supported frequency range.</para>
   </section>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
index c5a70bd..b788c72 100644
--- a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
+++ b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
@@ -337,11 +337,3 @@
 unavailable, for example the device is already in use by another
 process.</para>
   </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/dev-rds.xml b/Documentation/DocBook/media/v4l/dev-rds.xml
index 2427f54..38883a4 100644
--- a/Documentation/DocBook/media/v4l/dev-rds.xml
+++ b/Documentation/DocBook/media/v4l/dev-rds.xml
@@ -29,10 +29,10 @@
 will set the <constant>V4L2_TUNER_CAP_RDS</constant> flag in
 the <structfield>capability</structfield> field of &v4l2-tuner;.  If
 the driver only passes RDS blocks without interpreting the data
-the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be
+the <constant>V4L2_TUNER_CAP_RDS_BLOCK_IO</constant> flag has to be
 set, see <link linkend="reading-rds-data">Reading RDS data</link>.
 For future use the
-flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> has also been
+flag <constant>V4L2_TUNER_CAP_RDS_CONTROLS</constant> has also been
 defined. However, a driver for a radio tuner with this capability does
 not yet exist, so if you are planning to write such a driver you
 should discuss this on the linux-media mailing list: &v4l-ml;.</para>
@@ -52,9 +52,9 @@
 In order to enable the RDS transmission one must set the <constant>V4L2_TUNER_SUB_RDS</constant>
 bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.
 If the driver only passes RDS blocks without interpreting the data
-the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the
+the <constant>V4L2_TUNER_CAP_RDS_BLOCK_IO</constant> flag has to be set. If the
 tuner is capable of handling RDS entities like program identification codes and radio
-text, the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set,
+text, the flag <constant>V4L2_TUNER_CAP_RDS_CONTROLS</constant> should be set,
 see <link linkend="writing-rds-data">Writing RDS data</link> and
 <link linkend="fm-tx-controls">FM Transmitter Control Reference</link>.</para>
   </section>
@@ -194,11 +194,3 @@
       </tgroup>
     </table>
   </section>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml
index 69e789f..548f8ea 100644
--- a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml
+++ b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml
@@ -697,12 +697,3 @@
 
   </section>
   </section>
-
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-teletext.xml b/Documentation/DocBook/media/v4l/dev-teletext.xml
index 414b1cf..bd21c64 100644
--- a/Documentation/DocBook/media/v4l/dev-teletext.xml
+++ b/Documentation/DocBook/media/v4l/dev-teletext.xml
@@ -27,11 +27,3 @@
 
   <para>Modern devices all use the <link linkend="raw-vbi">raw</link> or
 <link linkend="sliced">sliced</link> VBI API.</para>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/driver.xml b/Documentation/DocBook/media/v4l/driver.xml
index 1f7eea5..eacafe3 100644
--- a/Documentation/DocBook/media/v4l/driver.xml
+++ b/Documentation/DocBook/media/v4l/driver.xml
@@ -198,11 +198,3 @@
     <para>to do</para>
   </section>
 -->
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-close.xml b/Documentation/DocBook/media/v4l/func-close.xml
index dfb41cb..232920d 100644
--- a/Documentation/DocBook/media/v4l/func-close.xml
+++ b/Documentation/DocBook/media/v4l/func-close.xml
@@ -60,11 +60,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-ioctl.xml b/Documentation/DocBook/media/v4l/func-ioctl.xml
index 2de64be..4394184 100644
--- a/Documentation/DocBook/media/v4l/func-ioctl.xml
+++ b/Documentation/DocBook/media/v4l/func-ioctl.xml
@@ -69,11 +69,3 @@
     the parameter remains unmodified.</para>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-mmap.xml b/Documentation/DocBook/media/v4l/func-mmap.xml
index 786732b..f31ad71 100644
--- a/Documentation/DocBook/media/v4l/func-mmap.xml
+++ b/Documentation/DocBook/media/v4l/func-mmap.xml
@@ -181,11 +181,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-munmap.xml b/Documentation/DocBook/media/v4l/func-munmap.xml
index e2c4190..860d49c 100644
--- a/Documentation/DocBook/media/v4l/func-munmap.xml
+++ b/Documentation/DocBook/media/v4l/func-munmap.xml
@@ -74,11 +74,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-open.xml b/Documentation/DocBook/media/v4l/func-open.xml
index 7595d07..cf64e20 100644
--- a/Documentation/DocBook/media/v4l/func-open.xml
+++ b/Documentation/DocBook/media/v4l/func-open.xml
@@ -111,11 +111,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-poll.xml b/Documentation/DocBook/media/v4l/func-poll.xml
index ec3c718..85cad8b 100644
--- a/Documentation/DocBook/media/v4l/func-poll.xml
+++ b/Documentation/DocBook/media/v4l/func-poll.xml
@@ -117,11 +117,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-read.xml b/Documentation/DocBook/media/v4l/func-read.xml
index a5089bf..e218bbf 100644
--- a/Documentation/DocBook/media/v4l/func-read.xml
+++ b/Documentation/DocBook/media/v4l/func-read.xml
@@ -179,11 +179,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-select.xml b/Documentation/DocBook/media/v4l/func-select.xml
index b671362..e12a60d 100644
--- a/Documentation/DocBook/media/v4l/func-select.xml
+++ b/Documentation/DocBook/media/v4l/func-select.xml
@@ -128,11 +128,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-write.xml b/Documentation/DocBook/media/v4l/func-write.xml
index 2c09c09..5752078 100644
--- a/Documentation/DocBook/media/v4l/func-write.xml
+++ b/Documentation/DocBook/media/v4l/func-write.xml
@@ -126,11 +126,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml
index 3f47df1..b815929 100644
--- a/Documentation/DocBook/media/v4l/io.xml
+++ b/Documentation/DocBook/media/v4l/io.xml
@@ -1282,11 +1282,3 @@
 	</mediaobject>
     </figure>
   </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/libv4l.xml b/Documentation/DocBook/media/v4l/libv4l.xml
index 3cb10ec..d3b71e2 100644
--- a/Documentation/DocBook/media/v4l/libv4l.xml
+++ b/Documentation/DocBook/media/v4l/libv4l.xml
@@ -158,10 +158,3 @@
 	</section>
 
 </section>
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-grey.xml b/Documentation/DocBook/media/v4l/pixfmt-grey.xml
index 3b72bc6..bee970d 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-grey.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-grey.xml
@@ -60,11 +60,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-m420.xml b/Documentation/DocBook/media/v4l/pixfmt-m420.xml
index ce4bc019..aadae92 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-m420.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-m420.xml
@@ -137,11 +137,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml
index 873f670..84dd4fd 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv12.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml
@@ -141,11 +141,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
index c9e166d..3fd3ce5 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
@@ -144,11 +144,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml
index 7a2855a..2f82b1d 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml
@@ -64,11 +64,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv16.xml b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml
index 2609403..8ae1f8a8 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml
@@ -164,11 +164,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv24.xml b/Documentation/DocBook/media/v4l/pixfmt-nv24.xml
new file mode 100644
index 0000000..fb255f2
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv24.xml
@@ -0,0 +1,121 @@
+    <refentry>
+      <refmeta>
+	<refentrytitle>V4L2_PIX_FMT_NV24 ('NV24'), V4L2_PIX_FMT_NV42 ('NV42')</refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname id="V4L2-PIX-FMT-NV24"><constant>V4L2_PIX_FMT_NV24</constant></refname>
+	<refname id="V4L2-PIX-FMT-NV42"><constant>V4L2_PIX_FMT_NV42</constant></refname>
+	<refpurpose>Formats with full horizontal and vertical
+chroma resolutions, also known as YUV 4:4:4. One luminance and one
+chrominance plane with alternating chroma samples as opposed to
+<constant>V4L2_PIX_FMT_YVU420</constant></refpurpose>
+      </refnamediv>
+      <refsect1>
+	<title>Description</title>
+
+	<para>These are two-plane versions of the YUV 4:4:4 format. The three
+	components are separated into two sub-images or planes. The Y plane is
+	first, with each Y sample stored in one byte per pixel. For
+	<constant>V4L2_PIX_FMT_NV24</constant>, a combined CbCr plane
+	immediately follows the Y plane in memory. The CbCr plane has the same
+	width and height, in pixels, as the Y plane (and the image). Each line
+	contains one CbCr pair per pixel, with each Cb and Cr sample stored in
+	one byte. <constant>V4L2_PIX_FMT_NV42</constant> is the same except that
+	the Cb and Cr samples are swapped, the CrCb plane starts with a Cr
+	sample.</para>
+
+	<para>If the Y plane has pad bytes after each row, then the CbCr plane
+	has twice as many pad bytes after its rows.</para>
+
+	<example>
+	  <title><constant>V4L2_PIX_FMT_NV24</constant> 4 &times; 4
+pixel image</title>
+
+	  <formalpara>
+	    <title>Byte Order.</title>
+	    <para>Each cell is one byte.
+		<informaltable frame="none">
+		<tgroup cols="9" align="center">
+		  <colspec align="left" colwidth="2*" />
+		  <tbody valign="top">
+		    <row>
+		      <entry>start&nbsp;+&nbsp;0:</entry>
+		      <entry>Y'<subscript>00</subscript></entry>
+		      <entry>Y'<subscript>01</subscript></entry>
+		      <entry>Y'<subscript>02</subscript></entry>
+		      <entry>Y'<subscript>03</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;4:</entry>
+		      <entry>Y'<subscript>10</subscript></entry>
+		      <entry>Y'<subscript>11</subscript></entry>
+		      <entry>Y'<subscript>12</subscript></entry>
+		      <entry>Y'<subscript>13</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;8:</entry>
+		      <entry>Y'<subscript>20</subscript></entry>
+		      <entry>Y'<subscript>21</subscript></entry>
+		      <entry>Y'<subscript>22</subscript></entry>
+		      <entry>Y'<subscript>23</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;12:</entry>
+		      <entry>Y'<subscript>30</subscript></entry>
+		      <entry>Y'<subscript>31</subscript></entry>
+		      <entry>Y'<subscript>32</subscript></entry>
+		      <entry>Y'<subscript>33</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;16:</entry>
+		      <entry>Cb<subscript>00</subscript></entry>
+		      <entry>Cr<subscript>00</subscript></entry>
+		      <entry>Cb<subscript>01</subscript></entry>
+		      <entry>Cr<subscript>01</subscript></entry>
+		      <entry>Cb<subscript>02</subscript></entry>
+		      <entry>Cr<subscript>02</subscript></entry>
+		      <entry>Cb<subscript>03</subscript></entry>
+		      <entry>Cr<subscript>03</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;24:</entry>
+		      <entry>Cb<subscript>10</subscript></entry>
+		      <entry>Cr<subscript>10</subscript></entry>
+		      <entry>Cb<subscript>11</subscript></entry>
+		      <entry>Cr<subscript>11</subscript></entry>
+		      <entry>Cb<subscript>12</subscript></entry>
+		      <entry>Cr<subscript>12</subscript></entry>
+		      <entry>Cb<subscript>13</subscript></entry>
+		      <entry>Cr<subscript>13</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;32:</entry>
+		      <entry>Cb<subscript>20</subscript></entry>
+		      <entry>Cr<subscript>20</subscript></entry>
+		      <entry>Cb<subscript>21</subscript></entry>
+		      <entry>Cr<subscript>21</subscript></entry>
+		      <entry>Cb<subscript>22</subscript></entry>
+		      <entry>Cr<subscript>22</subscript></entry>
+		      <entry>Cb<subscript>23</subscript></entry>
+		      <entry>Cr<subscript>23</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;40:</entry>
+		      <entry>Cb<subscript>30</subscript></entry>
+		      <entry>Cr<subscript>30</subscript></entry>
+		      <entry>Cb<subscript>31</subscript></entry>
+		      <entry>Cr<subscript>31</subscript></entry>
+		      <entry>Cb<subscript>32</subscript></entry>
+		      <entry>Cr<subscript>32</subscript></entry>
+		      <entry>Cb<subscript>33</subscript></entry>
+		      <entry>Cr<subscript>33</subscript></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	  </formalpara>
+	</example>
+      </refsect1>
+    </refentry>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml
index 4db272b..166c8d6 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml
@@ -428,8 +428,11 @@
     <para>Bit 7 is the most significant bit. The value of a = alpha
 bits is undefined when reading from the driver, ignored when writing
 to the driver, except when alpha blending has been negotiated for a
-<link linkend="overlay">Video Overlay</link> or <link
-linkend="osd">Video Output Overlay</link>.</para>
+<link linkend="overlay">Video Overlay</link> or <link linkend="osd">
+Video Output Overlay</link> or when alpha component has been configured
+for a <link linkend="capture">Video Capture</link> by means of <link
+linkend="v4l2-alpha-component"> <constant>V4L2_CID_ALPHA_COMPONENT
+</constant> </link> control.</para>
 
     <example>
       <title><constant>V4L2_PIX_FMT_BGR24</constant> 4 &times; 4 pixel
@@ -930,11 +933,3 @@
 
   </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml
index 3cab5d0..33fa5a4 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml
@@ -234,11 +234,3 @@
 
   </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml
index 519a9ef..6494b05 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml
@@ -81,11 +81,3 @@
     </example>
   </refsect1>
 </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml
index 5fe84ec..5eaf2b4 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml
@@ -65,11 +65,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml
index d67a472..fee65dc 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml
@@ -65,11 +65,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml
index 0cdf13b..19727ab 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml
@@ -65,11 +65,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml
index 816c8d4..b1f6801 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml
@@ -118,11 +118,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml
index 61f12a5..8280340 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml
@@ -118,11 +118,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-y16.xml b/Documentation/DocBook/media/v4l/pixfmt-y16.xml
index d584040..ff4f727 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-y16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-y16.xml
@@ -79,11 +79,3 @@
     </example>
   </refsect1>
 </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-y41p.xml b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml
index 73c8536..98dcb91 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-y41p.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml
@@ -147,11 +147,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml
index 8eb4a19..0869dce 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml
@@ -131,11 +131,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml
index 00e0960..086dc73 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml
@@ -145,11 +145,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml
index 42d7de5..48649fa 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml
@@ -147,11 +147,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
index f5d8f57..9957863 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
@@ -152,11 +152,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml
index 4348bd9..4ce6463 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml
@@ -151,11 +151,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml
index bdb2ffa..5838409 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml
@@ -118,11 +118,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml
index 40d17ae..bfffdc7 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml
@@ -118,11 +118,3 @@
 	</example>
       </refsect1>
     </refentry>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index 2ff6b77..31eaae2 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -714,6 +714,7 @@
     &sub-nv12m;
     &sub-nv12mt;
     &sub-nv16;
+    &sub-nv24;
     &sub-m420;
   </section>
 
@@ -890,6 +891,11 @@
 	    <entry>'M310'</entry>
 	    <entry>Compressed BGGR Bayer format used by the gspca driver.</entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-JL2005BCD">
+	    <entry><constant>V4L2_PIX_FMT_JL2005BCD</constant></entry>
+	    <entry>'JL20'</entry>
+	    <entry>JPEG compressed RGGB Bayer format used by the gspca driver.</entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-OV511">
 	    <entry><constant>V4L2_PIX_FMT_OV511</constant></entry>
 	    <entry>'O511'</entry>
@@ -997,11 +1003,3 @@
       </tgroup>
     </table>
   </section>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml
new file mode 100644
index 0000000..2f0bdb4
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/selection-api.xml
@@ -0,0 +1,321 @@
+<section id="selection-api">
+
+  <title>Experimental API for cropping, composing and scaling</title>
+
+      <note>
+	<title>Experimental</title>
+
+	<para>This is an <link linkend="experimental">experimental</link>
+interface and may change in the future.</para>
+      </note>
+
+  <section>
+    <title>Introduction</title>
+
+<para>Some video capture devices can sample a subsection of a picture and
+shrink or enlarge it to an image of arbitrary size. Next, the devices can
+insert the image into larger one. Some video output devices can crop part of an
+input image, scale it up or down and insert it at an arbitrary scan line and
+horizontal offset into a video signal. We call these abilities cropping,
+scaling and composing.</para>
+
+<para>On a video <emphasis>capture</emphasis> device the source is a video
+signal, and the cropping target determine the area actually sampled. The sink
+is an image stored in a memory buffer.  The composing area specifies which part
+of the buffer is actually written to by the hardware. </para>
+
+<para>On a video <emphasis>output</emphasis> device the source is an image in a
+memory buffer, and the cropping target is a part of an image to be shown on a
+display. The sink is the display or the graphics screen. The application may
+select the part of display where the image should be displayed. The size and
+position of such a window is controlled by the compose target.</para>
+
+<para>Rectangles for all cropping and composing targets are defined even if the
+device does supports neither cropping nor composing. Their size and position
+will be fixed in such a case. If the device does not support scaling then the
+cropping and composing rectangles have the same size.</para>
+
+  </section>
+
+    <section>
+      <title>Selection targets</title>
+
+      <figure id="sel-targets-capture">
+	<title>Cropping and composing targets</title>
+	<mediaobject>
+	  <imageobject>
+	    <imagedata fileref="selection.png" format="PNG" />
+	  </imageobject>
+	  <textobject>
+	    <phrase>Targets used by a cropping, composing and scaling
+            process</phrase>
+	  </textobject>
+	</mediaobject>
+      </figure>
+    </section>
+
+  <section>
+
+  <title>Configuration</title>
+
+<para>Applications can use the <link linkend="vidioc-g-selection">selection
+API</link> to select an area in a video signal or a buffer, and to query for
+default settings and hardware limits.</para>
+
+<para>Video hardware can have various cropping, composing and scaling
+limitations. It may only scale up or down, support only discrete scaling
+factors, or have different scaling abilities in the horizontal and vertical
+directions. Also it may not support scaling at all. At the same time the
+cropping/composing rectangles may have to be aligned, and both the source and
+the sink may have arbitrary upper and lower size limits. Therefore, as usual,
+drivers are expected to adjust the requested parameters and return the actual
+values selected. An application can control the rounding behaviour using <link
+linkend="v4l2-sel-flags"> constraint flags </link>.</para>
+
+   <section>
+
+   <title>Configuration of video capture</title>
+
+<para>See figure <xref linkend="sel-targets-capture" /> for examples of the
+selection targets available for a video capture device.  It is recommended to
+configure the cropping targets before to the composing targets.</para>
+
+<para>The range of coordinates of the top left corner, width and height of
+areas that can be sampled is given by the <constant> V4L2_SEL_TGT_CROP_BOUNDS
+</constant> target. It is recommended for the driver developers to put the
+top/left corner at position <constant> (0,0) </constant>.  The rectangle's
+coordinates are expressed in pixels.</para>
+
+<para>The top left corner, width and height of the source rectangle, that is
+the area actually sampled, is given by the <constant> V4L2_SEL_TGT_CROP_ACTIVE
+</constant> target. It uses the same coordinate system as <constant>
+V4L2_SEL_TGT_CROP_BOUNDS </constant>. The active cropping area must lie
+completely inside the capture boundaries. The driver may further adjust the
+requested size and/or position according to hardware limitations.</para>
+
+<para>Each capture device has a default source rectangle, given by the
+<constant> V4L2_SEL_TGT_CROP_DEFAULT </constant> target. This rectangle shall
+over what the driver writer considers the complete picture.  Drivers shall set
+the active crop rectangle to the default when the driver is first loaded, but
+not later.</para>
+
+<para>The composing targets refer to a memory buffer. The limits of composing
+coordinates are obtained using <constant> V4L2_SEL_TGT_COMPOSE_BOUNDS
+</constant>.  All coordinates are expressed in pixels. The rectangle's top/left
+corner must be located at position <constant> (0,0) </constant>. The width and
+height are equal to the image size set by <constant> VIDIOC_S_FMT </constant>.
+</para>
+
+<para>The part of a buffer into which the image is inserted by the hardware is
+controlled by the <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.
+The rectangle's coordinates are also expressed in the same coordinate system as
+the bounds rectangle. The composing rectangle must lie completely inside bounds
+rectangle. The driver must adjust the composing rectangle to fit to the
+bounding limits. Moreover, the driver can perform other adjustments according
+to hardware limitations. The application can control rounding behaviour using
+<link linkend="v4l2-sel-flags"> constraint flags </link>.</para>
+
+<para>For capture devices the default composing rectangle is queried using
+<constant> V4L2_SEL_TGT_COMPOSE_DEFAULT </constant>. It is usually equal to the
+bounding rectangle.</para>
+
+<para>The part of a buffer that is modified by the hardware is given by
+<constant> V4L2_SEL_TGT_COMPOSE_PADDED </constant>. It contains all pixels
+defined using <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> plus all
+padding data modified by hardware during insertion process. All pixels outside
+this rectangle <emphasis>must not</emphasis> be changed by the hardware. The
+content of pixels that lie inside the padded area but outside active area is
+undefined. The application can use the padded and active rectangles to detect
+where the rubbish pixels are located and remove them if needed.</para>
+
+   </section>
+
+   <section>
+
+   <title>Configuration of video output</title>
+
+<para>For output devices targets and ioctls are used similarly to the video
+capture case. The <emphasis> composing </emphasis> rectangle refers to the
+insertion of an image into a video signal. The cropping rectangles refer to a
+memory buffer. It is recommended to configure the composing targets before to
+the cropping targets.</para>
+
+<para>The cropping targets refer to the memory buffer that contains an image to
+be inserted into a video signal or graphical screen. The limits of cropping
+coordinates are obtained using <constant> V4L2_SEL_TGT_CROP_BOUNDS </constant>.
+All coordinates are expressed in pixels. The top/left corner is always point
+<constant> (0,0) </constant>.  The width and height is equal to the image size
+specified using <constant> VIDIOC_S_FMT </constant> ioctl.</para>
+
+<para>The top left corner, width and height of the source rectangle, that is
+the area from which image date are processed by the hardware, is given by the
+<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant>. Its coordinates are expressed
+in in the same coordinate system as the bounds rectangle. The active cropping
+area must lie completely inside the crop boundaries and the driver may further
+adjust the requested size and/or position according to hardware
+limitations.</para>
+
+<para>For output devices the default cropping rectangle is queried using
+<constant> V4L2_SEL_TGT_CROP_DEFAULT </constant>. It is usually equal to the
+bounding rectangle.</para>
+
+<para>The part of a video signal or graphics display where the image is
+inserted by the hardware is controlled by <constant>
+V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.  The rectangle's coordinates
+are expressed in pixels. The composing rectangle must lie completely inside the
+bounds rectangle.  The driver must adjust the area to fit to the bounding
+limits.  Moreover, the driver can perform other adjustments according to
+hardware limitations. </para>
+
+<para>The device has a default composing rectangle, given by the <constant>
+V4L2_SEL_TGT_COMPOSE_DEFAULT </constant> target. This rectangle shall cover what
+the driver writer considers the complete picture. It is recommended for the
+driver developers to put the top/left corner at position <constant> (0,0)
+</constant>. Drivers shall set the active composing rectangle to the default
+one when the driver is first loaded.</para>
+
+<para>The devices may introduce additional content to video signal other than
+an image from memory buffers.  It includes borders around an image. However,
+such a padded area is driver-dependent feature not covered by this document.
+Driver developers are encouraged to keep padded rectangle equal to active one.
+The padded target is accessed by the <constant> V4L2_SEL_TGT_COMPOSE_PADDED
+</constant> identifier.  It must contain all pixels from the <constant>
+V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para>
+
+   </section>
+
+   <section>
+
+     <title>Scaling control.</title>
+
+<para>An application can detect if scaling is performed by comparing the width
+and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP_ACTIVE
+</constant> and <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> targets. If
+these are not equal then the scaling is applied. The application can compute
+the scaling ratios using these values.</para>
+
+   </section>
+
+  </section>
+
+  <section>
+
+    <title>Comparison with old cropping API.</title>
+
+<para>The selection API was introduced to cope with deficiencies of previous
+<link linkend="crop"> API </link>, that was designed to control simple capture
+devices. Later the cropping API was adopted by video output drivers. The ioctls
+are used to select a part of the display were the video signal is inserted. It
+should be considered as an API abuse because the described operation is
+actually the composing.  The selection API makes a clear distinction between
+composing and cropping operations by setting the appropriate targets.  The V4L2
+API lacks any support for composing to and cropping from an image inside a
+memory buffer.  The application could configure a capture device to fill only a
+part of an image by abusing V4L2 API.  Cropping a smaller image from a larger
+one is achieved by setting the field <structfield>
+&v4l2-pix-format;::bytesperline </structfield>.  Introducing an image offsets
+could be done by modifying field <structfield> &v4l2-buffer;::m:userptr
+</structfield> before calling <constant> VIDIOC_QBUF </constant>. Those
+operations should be avoided because they are not portable (endianness), and do
+not work for macroblock and Bayer formats and mmap buffers.  The selection API
+deals with configuration of buffer cropping/composing in a clear, intuitive and
+portable way.  Next, with the selection API the concepts of the padded target
+and constraints flags are introduced.  Finally, <structname> &v4l2-crop;
+</structname> and <structname> &v4l2-cropcap; </structname> have no reserved
+fields. Therefore there is no way to extend their functionality.  The new
+<structname> &v4l2-selection; </structname> provides a lot of place for future
+extensions.  Driver developers are encouraged to implement only selection API.
+The former cropping API would be simulated using the new one. </para>
+
+  </section>
+
+   <section>
+      <title>Examples</title>
+      <example>
+	<title>Resetting the cropping parameters</title>
+
+	<para>(A video capture device is assumed; change <constant>
+V4L2_BUF_TYPE_VIDEO_CAPTURE </constant> for other devices; change target to
+<constant> V4L2_SEL_TGT_COMPOSE_* </constant> family to configure composing
+area)</para>
+
+	<programlisting>
+
+	&v4l2-selection; sel = {
+		.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+		.target = V4L2_SEL_TGT_CROP_DEFAULT,
+	};
+	ret = ioctl(fd, &VIDIOC-G-SELECTION;, &amp;sel);
+	if (ret)
+		exit(-1);
+	sel.target = V4L2_SEL_TGT_CROP_ACTIVE;
+	ret = ioctl(fd, &VIDIOC-S-SELECTION;, &amp;sel);
+	if (ret)
+		exit(-1);
+
+        </programlisting>
+      </example>
+
+      <example>
+	<title>Simple downscaling</title>
+	<para>Setting a composing area on output of size of <emphasis> at most
+</emphasis> half of limit placed at a center of a display.</para>
+	<programlisting>
+
+	&v4l2-selection; sel = {
+		.type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
+		.target = V4L2_SEL_TGT_COMPOSE_BOUNDS,
+	};
+	struct v4l2_rect r;
+
+	ret = ioctl(fd, &VIDIOC-G-SELECTION;, &amp;sel);
+	if (ret)
+		exit(-1);
+	/* setting smaller compose rectangle */
+	r.width = sel.r.width / 2;
+	r.height = sel.r.height / 2;
+	r.left = sel.r.width / 4;
+	r.top = sel.r.height / 4;
+	sel.r = r;
+	sel.target = V4L2_SEL_TGT_COMPOSE_ACTIVE;
+	sel.flags = V4L2_SEL_FLAG_LE;
+	ret = ioctl(fd, &VIDIOC-S-SELECTION;, &amp;sel);
+	if (ret)
+		exit(-1);
+
+        </programlisting>
+      </example>
+
+      <example>
+	<title>Querying for scaling factors</title>
+	<para>A video output device is assumed; change <constant>
+V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> for other devices</para>
+	<programlisting>
+
+	&v4l2-selection; compose = {
+		.type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
+		.target = V4L2_SEL_TGT_COMPOSE_ACTIVE,
+	};
+	&v4l2-selection; crop = {
+		.type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
+		.target = V4L2_SEL_TGT_CROP_ACTIVE,
+	};
+	double hscale, vscale;
+
+	ret = ioctl(fd, &VIDIOC-G-SELECTION;, &amp;compose);
+	if (ret)
+		exit(-1);
+	ret = ioctl(fd, &VIDIOC-G-SELECTION;, &amp;crop);
+	if (ret)
+		exit(-1);
+
+	/* computing scaling factors */
+	hscale = (double)compose.r.width / crop.r.width;
+	vscale = (double)compose.r.height / crop.r.height;
+
+	</programlisting>
+      </example>
+
+   </section>
+
+</section>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index 2ab365c..e97c512 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -501,6 +501,7 @@
     &sub-g-output;
     &sub-g-parm;
     &sub-g-priority;
+    &sub-g-selection;
     &sub-g-sliced-vbi-cap;
     &sub-g-std;
     &sub-g-tuner;
diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml
index 1d31427..0be17c2 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml
@@ -228,11 +228,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml
index 71d373b..347d142 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml
@@ -156,11 +156,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml
index 476fe1d..9b8efcd 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml
@@ -311,11 +311,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml
index a281d26..a64d5ef 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml
@@ -196,11 +196,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml
index 95803fe..3a5fc54 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml
@@ -381,11 +381,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml
index 5146d00..12b1d05 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml
@@ -127,11 +127,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index 5122ce8..b17a7aa 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -183,7 +183,12 @@
 	    <entry>__u32</entry>
 	    <entry><structfield>ctrl_class</structfield></entry>
 	    <entry>The control class to which all controls belong, see
-<xref linkend="ctrl-class" />.</entry>
+<xref linkend="ctrl-class" />. Drivers that use a kernel framework for handling
+controls will also accept a value of 0 here, meaning that the controls can
+belong to any control class. Whether drivers support this can be tested by setting
+<structfield>ctrl_class</structfield> to 0 and calling <constant>VIDIOC_TRY_EXT_CTRLS</constant>
+with a <structfield>count</structfield> of 0. If that succeeds, then the driver
+supports this feature.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
@@ -194,10 +199,13 @@
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>error_idx</structfield></entry>
-	    <entry>Set by the driver in case of an error. It is the
-index of the control causing the error or equal to 'count' when the
-error is not associated with a particular control. Undefined when the
-ioctl returns 0 (success).</entry>
+	    <entry>Set by the driver in case of an error. If it is equal
+to <structfield>count</structfield>, then no actual changes were made to
+controls. In other words, the error was not associated with setting a particular
+control. If it is another value, then only the controls up to <structfield>error_idx-1</structfield>
+were modified and control <structfield>error_idx</structfield> is the one that
+caused the error. The <structfield>error_idx</structfield> value is undefined
+if the ioctl returned 0 (success).</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
@@ -312,10 +320,3 @@
   </refsect1>
 </refentry>
 
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
index 0557182..7c63815 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
@@ -295,7 +295,8 @@
 	    <entry>The device is capable of non-destructive overlays.
 When the driver clears this flag, only destructive overlays are
 supported. There are no drivers yet which support both destructive and
-non-destructive overlays.</entry>
+non-destructive overlays. Video Output Overlays are in practice always
+non-destructive.</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_FBUF_CAP_CHROMAKEY</constant></entry>
@@ -339,8 +340,8 @@
 	  <row>
 	    <entry><constant>V4L2_FBUF_CAP_SRC_CHROMAKEY</constant></entry>
 	    <entry>0x0080</entry>
-	    <entry>The device supports Source Chroma-keying. Framebuffer pixels
-with the chroma-key colors are replaced by video pixels, which is exactly opposite of
+	    <entry>The device supports Source Chroma-keying. Video pixels
+with the chroma-key colors are replaced by framebuffer pixels, which is exactly opposite of
 <constant>V4L2_FBUF_CAP_CHROMAKEY</constant></entry>
 	  </row>
 	</tbody>
@@ -356,21 +357,27 @@
 	    <entry><constant>V4L2_FBUF_FLAG_PRIMARY</constant></entry>
 	    <entry>0x0001</entry>
 	    <entry>The framebuffer is the primary graphics surface.
-In other words, the overlay is destructive. [?]</entry>
+In other words, the overlay is destructive. This flag is typically set by any
+driver that doesn't have the <constant>V4L2_FBUF_CAP_EXTERNOVERLAY</constant>
+capability and it is cleared otherwise.</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_FBUF_FLAG_OVERLAY</constant></entry>
 	    <entry>0x0002</entry>
-	    <entry>The frame buffer is an overlay surface the same
-size as the capture. [?]</entry>
-	  </row>
-	  <row>
-	    <entry spanname="hspan">The purpose of
-<constant>V4L2_FBUF_FLAG_PRIMARY</constant> and
-<constant>V4L2_FBUF_FLAG_OVERLAY</constant> was never quite clear.
-Most drivers seem to ignore these flags. For compatibility with the
-<wordasword>bttv</wordasword> driver applications should set the
-<constant>V4L2_FBUF_FLAG_OVERLAY</constant> flag.</entry>
+	    <entry>If this flag is set for a video capture device, then the
+driver will set the initial overlay size to cover the full framebuffer size,
+otherwise the existing overlay size (as set by &VIDIOC-S-FMT;) will be used.
+
+Only one video capture driver (bttv) supports this flag. The use of this flag
+for capture devices is deprecated. There is no way to detect which drivers
+support this flag, so the only reliable method of setting the overlay size is
+through &VIDIOC-S-FMT;.
+
+If this flag is set for a video output device, then the video output overlay
+window is relative to the top-left corner of the framebuffer and restricted
+to the size of the framebuffer. If it is cleared, then the video output
+overlay window is relative to the video output display.
+            </entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_FBUF_FLAG_CHROMAKEY</constant></entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
index 062d720..66e9a52 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
@@ -98,8 +98,11 @@
 	    <entry>&v4l2-tuner-type;</entry>
 	    <entry><structfield>type</structfield></entry>
 	    <entry>The tuner type. This is the same value as in the
-&v4l2-tuner; <structfield>type</structfield> field. The field is not
-applicable to modulators, &ie; ignored by drivers.</entry>
+&v4l2-tuner; <structfield>type</structfield> field. The type must be set
+to <constant>V4L2_TUNER_RADIO</constant> for <filename>/dev/radioX</filename>
+device nodes, and to <constant>V4L2_TUNER_ANALOG_TV</constant>
+for all others. The field is not applicable to modulators, &ie; ignored
+by drivers.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
@@ -135,11 +138,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-input.xml b/Documentation/DocBook/media/v4l/vidioc-g-input.xml
index 08ae82f..1d43065 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-input.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-input.xml
@@ -61,8 +61,8 @@
 <constant>VIDIOC_S_INPUT</constant> ioctl with a pointer to this
 integer. Side effects are possible. For example inputs may support
 different video standards, so the driver may implicitly switch the
-current standard. It is good practice to select an input before
-querying or negotiating any other parameters.</para>
+current standard. Because of these possible side effects applications
+must select an input before querying or negotiating any other parameters.</para>
 
     <para>Information about video inputs is available using the
 &VIDIOC-ENUMINPUT; ioctl.</para>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml
index 15ce660..7f4ac7e 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml
@@ -236,11 +236,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-output.xml b/Documentation/DocBook/media/v4l/vidioc-g-output.xml
index fd45f1c..4533068 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-output.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-output.xml
@@ -61,8 +61,9 @@
 <constant>VIDIOC_S_OUTPUT</constant> ioctl with a pointer to this integer.
 Side effects are possible. For example outputs may support different
 video standards, so the driver may implicitly switch the current
-standard. It is good practice to select an output before querying or
-negotiating any other parameters.</para>
+standard.
+standard. Because of these possible side effects applications
+must select an output before querying or negotiating any other parameters.</para>
 
     <para>Information about video outputs is available using the
 &VIDIOC-ENUMOUTPUT; ioctl.</para>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-priority.xml b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml
index 8f5e3da..6a81b4f 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-priority.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml
@@ -133,11 +133,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
new file mode 100644
index 0000000..a9d36e0
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
@@ -0,0 +1,304 @@
+<refentry id="vidioc-g-selection">
+
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_G_SELECTION, VIDIOC_S_SELECTION</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_G_SELECTION</refname>
+    <refname>VIDIOC_S_SELECTION</refname>
+    <refpurpose>Get or set one of the selection rectangles</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_selection *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_G_SELECTION, VIDIOC_S_SELECTION</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <note>
+      <title>Experimental</title>
+      <para>This is an <link linkend="experimental"> experimental </link>
+      interface and may change in the future.</para>
+    </note>
+
+    <para>The ioctls are used to query and configure selection rectangles.</para>
+
+<para> To query the cropping (composing) rectangle set <structfield>
+&v4l2-selection;::type </structfield> to the respective buffer type.  Do not
+use multiplanar buffers.  Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE
+</constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE
+</constant>.  Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of
+<constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>.  The next step is
+setting <structfield> &v4l2-selection;::target </structfield> to value
+<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant>
+V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>).  Please refer to table <xref
+linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional
+targets.  Fields <structfield> &v4l2-selection;::flags </structfield> and
+<structfield> &v4l2-selection;::reserved </structfield> are ignored and they
+must be filled with zeros.  The driver fills the rest of the structure or
+returns &EINVAL; if incorrect buffer type or target was used. If cropping
+(composing) is not supported then the active rectangle is not mutable and it is
+always equal to the bounds rectangle.  Finally, structure <structfield>
+&v4l2-selection;::r </structfield> is filled with the current cropping
+(composing) coordinates. The coordinates are expressed in driver-dependent
+units. The only exception are rectangles for images in raw formats, whose
+coordinates are always expressed in pixels.  </para>
+
+<para> To change the cropping (composing) rectangle set <structfield>
+&v4l2-selection;::type </structfield> to the respective buffer type.  Do not
+use multiplanar buffers.  Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE
+</constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE
+</constant>.  Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of
+<constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>.  The next step is
+setting <structfield> &v4l2-selection;::target </structfield> to value
+<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant>
+V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref
+linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional
+targets.  Set desired active area into the field <structfield>
+&v4l2-selection;::r </structfield>.  Field <structfield>
+&v4l2-selection;::reserved </structfield> is ignored and must be filled with
+zeros.  The driver may adjust the rectangle coordinates. An application may
+introduce constraints to control rounding behaviour. Set the field
+<structfield> &v4l2-selection;::flags </structfield> to one of values:
+
+<itemizedlist>
+  <listitem>
+<para><constant>0</constant> - The driver can adjust the rectangle size freely
+and shall choose a crop/compose rectangle as close as possible to the requested
+one.</para>
+  </listitem>
+  <listitem>
+<para><constant>V4L2_SEL_FLAG_GE</constant> - The driver is not allowed to
+shrink the rectangle.  The original rectangle must lay inside the adjusted
+one.</para>
+  </listitem>
+  <listitem>
+<para><constant>V4L2_SEL_FLAG_LE</constant> - The driver is not allowed to
+enlarge the rectangle.  The adjusted rectangle must lay inside the original
+one.</para>
+  </listitem>
+  <listitem>
+<para><constant>V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE</constant> - The driver
+must choose the size exactly the same as in the requested rectangle.</para>
+  </listitem>
+</itemizedlist>
+
+Please refer to <xref linkend="sel-const-adjust" />.
+
+</para>
+
+<para> The driver may have to adjusts the requested dimensions against hardware
+limits and other parts as the pipeline, i.e. the bounds given by the
+capture/output window or TV display. The closest possible values of horizontal
+and vertical offset and sizes are chosen according to following priority:
+
+<orderedlist>
+  <listitem>
+    <para>Satisfy constraints from <structfield>&v4l2-selection;::flags</structfield>.</para>
+  </listitem>
+  <listitem>
+    <para>Adjust width, height, left, and top to hardware limits and alignments.</para>
+  </listitem>
+  <listitem>
+    <para>Keep center of adjusted rectangle as close as possible to the original one.</para>
+  </listitem>
+  <listitem>
+    <para>Keep width and height as close as possible to original ones.</para>
+  </listitem>
+  <listitem>
+    <para>Keep horizontal and vertical offset as close as possible to original ones.</para>
+  </listitem>
+</orderedlist>
+
+On success the field <structfield> &v4l2-selection;::r </structfield> contains
+the adjusted rectangle. When the parameters are unsuitable the application may
+modify the cropping (composing) or image parameters and repeat the cycle until
+satisfactory parameters have been negotiated. If constraints flags have to be
+violated at then ERANGE is returned. The error indicates that <emphasis> there
+exist no rectangle </emphasis> that satisfies the constraints.</para>
+
+  </refsect1>
+
+  <refsect1>
+    <table frame="none" pgwide="1" id="v4l2-sel-target">
+      <title>Selection targets.</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+            <entry><constant>V4L2_SEL_TGT_CROP_ACTIVE</constant></entry>
+            <entry>0</entry>
+            <entry>area that is currently cropped by hardware</entry>
+	  </row>
+	  <row>
+            <entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry>
+            <entry>1</entry>
+            <entry>suggested cropping rectangle that covers the "whole picture"</entry>
+	  </row>
+	  <row>
+            <entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry>
+            <entry>2</entry>
+            <entry>limits for the cropping rectangle</entry>
+	  </row>
+	  <row>
+            <entry><constant>V4L2_SEL_TGT_COMPOSE_ACTIVE</constant></entry>
+            <entry>256</entry>
+            <entry>area to which data are composed by hardware</entry>
+	  </row>
+	  <row>
+            <entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry>
+            <entry>257</entry>
+            <entry>suggested composing rectangle that covers the "whole picture"</entry>
+	  </row>
+	  <row>
+            <entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry>
+            <entry>258</entry>
+            <entry>limits for the composing rectangle</entry>
+	  </row>
+	  <row>
+            <entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry>
+            <entry>259</entry>
+            <entry>the active area and all padding pixels that are inserted or modified by the hardware</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    <table frame="none" pgwide="1" id="v4l2-sel-flags">
+      <title>Selection constraint flags</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+            <entry><constant>V4L2_SEL_FLAG_GE</constant></entry>
+            <entry>0x00000001</entry>
+            <entry>indicate that adjusted rectangle must contain a rectangle from <structfield>&v4l2-selection;::r</structfield></entry>
+	  </row>
+	  <row>
+            <entry><constant>V4L2_SEL_FLAG_LE</constant></entry>
+            <entry>0x00000002</entry>
+            <entry>indicate that adjusted rectangle must be inside a rectangle from <structfield>&v4l2-selection;::r</structfield></entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+    <section>
+      <figure id="sel-const-adjust">
+	<title>Size adjustments with constraint flags.</title>
+	<mediaobject>
+	  <imageobject>
+	    <imagedata fileref="constraints.png" format="PNG" />
+	  </imageobject>
+	  <textobject>
+	    <phrase>Behaviour of rectangle adjustment for different constraint
+            flags.</phrase>
+	  </textobject>
+	</mediaobject>
+      </figure>
+    </section>
+
+  <refsect1>
+    <table pgwide="1" frame="none" id="v4l2-selection">
+      <title>struct <structname>v4l2_selection</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>type</structfield></entry>
+	    <entry>Type of the buffer (from &v4l2-buf-type;)</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>target</structfield></entry>
+            <entry>used to select between <link linkend="v4l2-sel-target"> cropping and composing rectangles </link></entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>flags</structfield></entry>
+            <entry>control over coordinates adjustments, refer to <link linkend="v4l2-sel-flags">selection flags</link></entry>
+	  </row>
+	  <row>
+	    <entry>&v4l2-rect;</entry>
+	    <entry><structfield>r</structfield></entry>
+	    <entry>selection rectangle</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved[9]</structfield></entry>
+	    <entry>Reserved fields for future use</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>The buffer <structfield> &v4l2-selection;::type </structfield>
+or <structfield> &v4l2-selection;::target </structfield> is not supported, or
+the <structfield> &v4l2-selection;::flags </structfield> are invalid.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>ERANGE</errorcode></term>
+	<listitem>
+	  <para>it is not possible to adjust a rectangle <structfield>
+&v4l2-selection;::r </structfield> that satisfies all contraints from
+<structfield> &v4l2-selection;::flags </structfield>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EBUSY</errorcode></term>
+	<listitem>
+	  <para>it is not possible to apply change of selection rectangle at the moment.
+Usually because streaming is in progress.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-std.xml b/Documentation/DocBook/media/v4l/vidioc-g-std.xml
index 37996f2..99ff1a0 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-std.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-std.xml
@@ -88,11 +88,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml
index bd98c73..91ec2fb 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml
@@ -318,6 +318,16 @@
 	<entry>RDS capture is supported. This capability is only valid for
 radio tuners.</entry>
 	  </row>
+	  <row>
+	<entry><constant>V4L2_TUNER_CAP_RDS_BLOCK_IO</constant></entry>
+	<entry>0x0100</entry>
+	<entry>The RDS data is passed as unparsed RDS blocks.</entry>
+	  </row>
+	  <row>
+	<entry><constant>V4L2_TUNER_CAP_RDS_CONTROLS</constant></entry>
+	<entry>0x0200</entry>
+	<entry>The RDS data is parsed by the hardware and set via controls.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>
@@ -525,11 +535,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml
index 5c104d4..6e414d7 100644
--- a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml
@@ -100,11 +100,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
index 0ac0057..36660d3 100644
--- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
@@ -443,11 +443,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml
index c30dcc4..e013da8 100644
--- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml
@@ -125,11 +125,3 @@
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index 5de23c0..cab4ec5 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -404,7 +404,7 @@
   /* SNDRV_CARDS: maximum number of cards supported by this module */
   static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
   static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
-  static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+  static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
 
   /* definition of the chip-specific record */
   struct mychip {
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 81bc1a9..f7ade3b 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -275,8 +275,8 @@
 If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
 kernel is the current stable kernel.
 
-2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
-released as needs dictate.  The normal release period is approximately 
+2.6.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
 instantly.
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 0c134f8..bff2d8b 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -328,6 +328,12 @@
 	RCU rather than SRCU, because RCU is almost always faster and
 	easier to use than is SRCU.
 
+	If you need to enter your read-side critical section in a
+	hardirq or exception handler, and then exit that same read-side
+	critical section in the task that was interrupted, then you need
+	to srcu_read_lock_raw() and srcu_read_unlock_raw(), which avoid
+	the lockdep checking that would otherwise this practice illegal.
+
 	Also unlike other forms of RCU, explicit initialization
 	and cleanup is required via init_srcu_struct() and
 	cleanup_srcu_struct().	These are passed a "struct srcu_struct"
diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt
index 3185270..bf77833 100644
--- a/Documentation/RCU/rcu.txt
+++ b/Documentation/RCU/rcu.txt
@@ -38,11 +38,11 @@
 
 	Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the
 	same effect, but require that the readers manipulate CPU-local
-	counters.  These counters allow limited types of blocking
-	within RCU read-side critical sections.  SRCU also uses
-	CPU-local counters, and permits general blocking within
-	RCU read-side critical sections.  These two variants of
-	RCU detect grace periods by sampling these counters.
+	counters.  These counters allow limited types of blocking within
+	RCU read-side critical sections.  SRCU also uses CPU-local
+	counters, and permits general blocking within RCU read-side
+	critical sections.  These variants of RCU detect grace periods
+	by sampling these counters.
 
 o	If I am running on a uniprocessor kernel, which can only do one
 	thing at a time, why should I wait for a grace period?
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index 4e95920..083d88c 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -101,6 +101,11 @@
 	CONFIG_TREE_PREEMPT_RCU case, you might see stall-warning
 	messages.
 
+o	A hardware or software issue shuts off the scheduler-clock
+	interrupt on a CPU that is not in dyntick-idle mode.  This
+	problem really has happened, and seems to be most likely to
+	result in RCU CPU stall warnings for CONFIG_NO_HZ=n kernels.
+
 o	A bug in the RCU implementation.
 
 o	A hardware failure.  This is quite unlikely, but has occurred
@@ -109,12 +114,11 @@
 	This resulted in a series of RCU CPU stall warnings, eventually
 	leading the realization that the CPU had failed.
 
-The RCU, RCU-sched, and RCU-bh implementations have CPU stall
-warning.  SRCU does not have its own CPU stall warnings, but its
-calls to synchronize_sched() will result in RCU-sched detecting
-RCU-sched-related CPU stalls.  Please note that RCU only detects
-CPU stalls when there is a grace period in progress.  No grace period,
-no CPU stall warnings.
+The RCU, RCU-sched, and RCU-bh implementations have CPU stall warning.
+SRCU does not have its own CPU stall warnings, but its calls to
+synchronize_sched() will result in RCU-sched detecting RCU-sched-related
+CPU stalls.  Please note that RCU only detects CPU stalls when there is
+a grace period in progress.  No grace period, no CPU stall warnings.
 
 To diagnose the cause of the stall, inspect the stack traces.
 The offending function will usually be near the top of the stack.
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt
index 783d6c1..d67068d 100644
--- a/Documentation/RCU/torture.txt
+++ b/Documentation/RCU/torture.txt
@@ -61,11 +61,24 @@
 		To properly exercise RCU implementations with preemptible
 		read-side critical sections.
 
+onoff_interval
+		The number of seconds between each attempt to execute a
+		randomly selected CPU-hotplug operation.  Defaults to
+		zero, which disables CPU hotplugging.  In HOTPLUG_CPU=n
+		kernels, rcutorture will silently refuse to do any
+		CPU-hotplug operations regardless of what value is
+		specified for onoff_interval.
+
 shuffle_interval
 		The number of seconds to keep the test threads affinitied
 		to a particular subset of the CPUs, defaults to 3 seconds.
 		Used in conjunction with test_no_idle_hz.
 
+shutdown_secs	The number of seconds to run the test before terminating
+		the test and powering off the system.  The default is
+		zero, which disables test termination and system shutdown.
+		This capability is useful for automated testing.
+
 stat_interval	The number of seconds between output of torture
 		statistics (via printk()).  Regardless of the interval,
 		statistics are printed when the module is unloaded.
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index aaf65f6..49587ab 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -105,14 +105,10 @@
 	or one greater than the interrupt-nesting depth otherwise.
 	The number after the second "/" is the NMI nesting depth.
 
-	This field is displayed only for CONFIG_NO_HZ kernels.
-
 o	"df" is the number of times that some other CPU has forced a
 	quiescent state on behalf of this CPU due to this CPU being in
 	dynticks-idle state.
 
-	This field is displayed only for CONFIG_NO_HZ kernels.
-
 o	"of" is the number of times that some other CPU has forced a
 	quiescent state on behalf of this CPU due to this CPU being
 	offline.  In a perfect world, this might never happen, but it
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 6ef6926..6bbe8dc 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -4,6 +4,7 @@
 1.	What is RCU, Fundamentally?  http://lwn.net/Articles/262464/
 2.	What is RCU? Part 2: Usage   http://lwn.net/Articles/263130/
 3.	RCU part 3: the RCU API      http://lwn.net/Articles/264090/
+4.	The RCU API, 2010 Edition    http://lwn.net/Articles/418853/
 
 
 What is RCU?
@@ -834,6 +835,8 @@
 
 	srcu_read_lock		synchronize_srcu	N/A
 	srcu_read_unlock	synchronize_srcu_expedited
+	srcu_read_lock_raw
+	srcu_read_unlock_raw
 	srcu_dereference
 
 SRCU:	Initialization/cleanup
@@ -855,27 +858,33 @@
 
 a.	Will readers need to block?  If so, you need SRCU.
 
-b.	What about the -rt patchset?  If readers would need to block
+b.	Is it necessary to start a read-side critical section in a
+	hardirq handler or exception handler, and then to complete
+	this read-side critical section in the task that was
+	interrupted?  If so, you need SRCU's srcu_read_lock_raw() and
+	srcu_read_unlock_raw() primitives.
+
+c.	What about the -rt patchset?  If readers would need to block
 	in an non-rt kernel, you need SRCU.  If readers would block
 	in a -rt kernel, but not in a non-rt kernel, SRCU is not
 	necessary.
 
-c.	Do you need to treat NMI handlers, hardirq handlers,
+d.	Do you need to treat NMI handlers, hardirq handlers,
 	and code segments with preemption disabled (whether
 	via preempt_disable(), local_irq_save(), local_bh_disable(),
 	or some other mechanism) as if they were explicit RCU readers?
 	If so, you need RCU-sched.
 
-d.	Do you need RCU grace periods to complete even in the face
+e.	Do you need RCU grace periods to complete even in the face
 	of softirq monopolization of one or more of the CPUs?  For
 	example, is your code subject to network-based denial-of-service
 	attacks?  If so, you need RCU-bh.
 
-e.	Is your workload too update-intensive for normal use of
+f.	Is your workload too update-intensive for normal use of
 	RCU, but inappropriate for other synchronization mechanisms?
 	If so, consider SLAB_DESTROY_BY_RCU.  But please be careful!
 
-f.	Otherwise, use RCU.
+g.	Otherwise, use RCU.
 
 Of course, this all assumes that you have determined that RCU is in fact
 the right tool for your job.
diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt
index 5cc699b..e7cc363 100644
--- a/Documentation/acpi/apei/einj.txt
+++ b/Documentation/acpi/apei/einj.txt
@@ -47,20 +47,53 @@
 
 - param1
   This file is used to set the first error parameter value. Effect of
-  parameter depends on error_type specified. For memory error, this is
-  physical memory address.  Only available if param_extension module
-  parameter is specified.
+  parameter depends on error_type specified.
 
 - param2
   This file is used to set the second error parameter value. Effect of
-  parameter depends on error_type specified. For memory error, this is
-  physical memory address mask.  Only available if param_extension
-  module parameter is specified.
+  parameter depends on error_type specified.
 
-Injecting parameter support is a BIOS version specific extension, that
-is, it only works on some BIOS version.  If you want to use it, please
-make sure your BIOS version has the proper support and specify
-"param_extension=y" in module parameter.
+BIOS versions based in the ACPI 4.0 specification have limited options
+to control where the errors are injected.  Your BIOS may support an
+extension (enabled with the param_extension=1 module parameter, or
+boot command line einj.param_extension=1). This allows the address
+and mask for memory injections to be specified by the param1 and
+param2 files in apei/einj.
+
+BIOS versions using the ACPI 5.0 specification have more control over
+the target of the injection. For processor related errors (type 0x1,
+0x2 and 0x4) the APICID of the target should be provided using the
+param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20)
+the address is set using param1 with a mask in param2 (0x0 is equivalent
+to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the
+segment, bus, device and function are specified using param1:
+
+         31     24 23    16 15    11 10      8  7        0
+	+-------------------------------------------------+
+	| segment |   bus  | device | function | reserved |
+	+-------------------------------------------------+
+
+An ACPI 5.0 BIOS may also allow vendor specific errors to be injected.
+In this case a file named vendor will contain identifying information
+from the BIOS that hopefully will allow an application wishing to use
+the vendor specific extension to tell that they are running on a BIOS
+that supports it. All vendor extensions have the 0x80000000 bit set in
+error_type. A file vendor_flags controls the interpretation of param1
+and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor
+documentation for details (and expect changes to this API if vendors
+creativity in using this feature expands beyond our expectations).
+
+Example:
+# cd /sys/kernel/debug/apei/einj
+# cat available_error_type		# See which errors can be injected
+0x00000002	Processor Uncorrectable non-fatal
+0x00000008	Memory Correctable
+0x00000010	Memory Uncorrectable non-fatal
+# echo 0x12345000 > param1		# Set memory address for injection
+# echo 0xfffffffffffff000 > param2	# Mask - anywhere in this page
+# echo 0x8 > error_type			# Choose correctable memory error
+# echo 1 > error_inject			# Inject now
+
 
 For more information about EINJ, please refer to ACPI specification
-version 4.0, section 17.5.
+version 4.0, section 17.5 and ACPI 5.0, section 18.6.
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index 771d48d..208a2d4 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -51,15 +51,14 @@
 ff000000	ffbfffff	Reserved for future expansion of DMA
 				mapping region.
 
-VMALLOC_END	feffffff	Free for platform use, recommended.
-				VMALLOC_END must be aligned to a 2MB
-				boundary.
-
 VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.
 				Memory returned by vmalloc/ioremap will
 				be dynamically placed in this region.
-				VMALLOC_START may be based upon the value
-				of the high_memory variable.
+				Machine specific static mappings are also
+				located here through iotable_init().
+				VMALLOC_START is based upon the value
+				of the high_memory variable, and VMALLOC_END
+				is equal to 0xff000000.
 
 PAGE_OFFSET	high_memory-1	Kernel direct-mapped RAM region.
 				This maps the platforms RAM, and typically
diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt
index 3bd585b..27f2b21 100644
--- a/Documentation/atomic_ops.txt
+++ b/Documentation/atomic_ops.txt
@@ -84,6 +84,93 @@
 
 *** YOU HAVE BEEN WARNED! ***
 
+Properly aligned pointers, longs, ints, and chars (and unsigned
+equivalents) may be atomically loaded from and stored to in the same
+sense as described for atomic_read() and atomic_set().  The ACCESS_ONCE()
+macro should be used to prevent the compiler from using optimizations
+that might otherwise optimize accesses out of existence on the one hand,
+or that might create unsolicited accesses on the other.
+
+For example consider the following code:
+
+	while (a > 0)
+		do_something();
+
+If the compiler can prove that do_something() does not store to the
+variable a, then the compiler is within its rights transforming this to
+the following:
+
+	tmp = a;
+	if (a > 0)
+		for (;;)
+			do_something();
+
+If you don't want the compiler to do this (and you probably don't), then
+you should use something like the following:
+
+	while (ACCESS_ONCE(a) < 0)
+		do_something();
+
+Alternatively, you could place a barrier() call in the loop.
+
+For another example, consider the following code:
+
+	tmp_a = a;
+	do_something_with(tmp_a);
+	do_something_else_with(tmp_a);
+
+If the compiler can prove that do_something_with() does not store to the
+variable a, then the compiler is within its rights to manufacture an
+additional load as follows:
+
+	tmp_a = a;
+	do_something_with(tmp_a);
+	tmp_a = a;
+	do_something_else_with(tmp_a);
+
+This could fatally confuse your code if it expected the same value
+to be passed to do_something_with() and do_something_else_with().
+
+The compiler would be likely to manufacture this additional load if
+do_something_with() was an inline function that made very heavy use
+of registers: reloading from variable a could save a flush to the
+stack and later reload.  To prevent the compiler from attacking your
+code in this manner, write the following:
+
+	tmp_a = ACCESS_ONCE(a);
+	do_something_with(tmp_a);
+	do_something_else_with(tmp_a);
+
+For a final example, consider the following code, assuming that the
+variable a is set at boot time before the second CPU is brought online
+and never changed later, so that memory barriers are not needed:
+
+	if (a)
+		b = 9;
+	else
+		b = 42;
+
+The compiler is within its rights to manufacture an additional store
+by transforming the above code into the following:
+
+	b = 42;
+	if (a)
+		b = 9;
+
+This could come as a fatal surprise to other code running concurrently
+that expected b to never have the value 42 if a was zero.  To prevent
+the compiler from doing this, write something like:
+
+	if (a)
+		ACCESS_ONCE(b) = 9;
+	else
+		ACCESS_ONCE(b) = 42;
+
+Don't even -think- about doing this without proper use of memory barriers,
+locks, or atomic operations if variable a can change at runtime!
+
+*** WARNING: ACCESS_ONCE() DOES NOT IMPLY A BARRIER! ***
+
 Now, we move onto the atomic operation interfaces typically implemented with
 the help of assembly code.
 
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 9c452ef..a7c96ae 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -594,53 +594,44 @@
 called multiple times against a cgroup.
 
 int can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
-	       struct task_struct *task)
+	       struct cgroup_taskset *tset)
 (cgroup_mutex held by caller)
 
-Called prior to moving a task into a cgroup; if the subsystem
-returns an error, this will abort the attach operation.  If a NULL
-task is passed, then a successful result indicates that *any*
-unspecified task can be moved into the cgroup. Note that this isn't
-called on a fork. If this method returns 0 (success) then this should
-remain valid while the caller holds cgroup_mutex and it is ensured that either
+Called prior to moving one or more tasks into a cgroup; if the
+subsystem returns an error, this will abort the attach operation.
+@tset contains the tasks to be attached and is guaranteed to have at
+least one task in it.
+
+If there are multiple tasks in the taskset, then:
+  - it's guaranteed that all are from the same thread group
+  - @tset contains all tasks from the thread group whether or not
+    they're switching cgroups
+  - the first task is the leader
+
+Each @tset entry also contains the task's old cgroup and tasks which
+aren't switching cgroup can be skipped easily using the
+cgroup_taskset_for_each() iterator. Note that this isn't called on a
+fork. If this method returns 0 (success) then this should remain valid
+while the caller holds cgroup_mutex and it is ensured that either
 attach() or cancel_attach() will be called in future.
 
-int can_attach_task(struct cgroup *cgrp, struct task_struct *tsk);
-(cgroup_mutex held by caller)
-
-As can_attach, but for operations that must be run once per task to be
-attached (possibly many when using cgroup_attach_proc). Called after
-can_attach.
-
 void cancel_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
-	       struct task_struct *task, bool threadgroup)
+		   struct cgroup_taskset *tset)
 (cgroup_mutex held by caller)
 
 Called when a task attach operation has failed after can_attach() has succeeded.
 A subsystem whose can_attach() has some side-effects should provide this
 function, so that the subsystem can implement a rollback. If not, not necessary.
 This will be called only about subsystems whose can_attach() operation have
-succeeded.
-
-void pre_attach(struct cgroup *cgrp);
-(cgroup_mutex held by caller)
-
-For any non-per-thread attachment work that needs to happen before
-attach_task. Needed by cpuset.
+succeeded. The parameters are identical to can_attach().
 
 void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
-	    struct cgroup *old_cgrp, struct task_struct *task)
+	    struct cgroup_taskset *tset)
 (cgroup_mutex held by caller)
 
 Called after the task has been attached to the cgroup, to allow any
 post-attachment activity that requires memory allocations or blocking.
-
-void attach_task(struct cgroup *cgrp, struct task_struct *tsk);
-(cgroup_mutex held by caller)
-
-As attach, but for operations that must be run once per task to be attached,
-like can_attach_task. Called before attach. Currently does not support any
-subsystem that might need the old_cgrp for every thread in the group.
+The parameters are identical to can_attach().
 
 void fork(struct cgroup_subsy *ss, struct task_struct *task)
 
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index cc0ebc5..4c95c00 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -44,8 +44,8 @@
  - oom-killer disable knob and oom-notifier
  - Root cgroup has no limit controls.
 
- Kernel memory and Hugepages are not under control yet. We just manage
- pages on LRU. To add more controls, we have to take care of performance.
+ Kernel memory support is work in progress, and the current version provides
+ basically functionality. (See Section 2.7)
 
 Brief summary of control files.
 
@@ -61,7 +61,7 @@
  memory.failcnt			 # show the number of memory usage hits limits
  memory.memsw.failcnt		 # show the number of memory+Swap hits limits
  memory.max_usage_in_bytes	 # show max memory usage recorded
- memory.memsw.usage_in_bytes	 # show max memory+Swap usage recorded
+ memory.memsw.max_usage_in_bytes # show max memory+Swap usage recorded
  memory.soft_limit_in_bytes	 # set/show soft limit of memory usage
  memory.stat			 # show various statistics
  memory.use_hierarchy		 # set/show hierarchical account enabled
@@ -72,6 +72,9 @@
  memory.oom_control		 # set/show oom controls.
  memory.numa_stat		 # show the number of memory usage per numa node
 
+ memory.kmem.tcp.limit_in_bytes  # set/show hard limit for tcp buf memory
+ memory.kmem.tcp.usage_in_bytes  # show current tcp buf memory allocation
+
 1. History
 
 The memory controller has a long history. A request for comments for the memory
@@ -255,6 +258,27 @@
   per-zone-per-cgroup LRU (cgroup's private LRU) is just guarded by
   zone->lru_lock, it has no lock of its own.
 
+2.7 Kernel Memory Extension (CONFIG_CGROUP_MEM_RES_CTLR_KMEM)
+
+With the Kernel memory extension, the Memory Controller is able to limit
+the amount of kernel memory used by the system. Kernel memory is fundamentally
+different than user memory, since it can't be swapped out, which makes it
+possible to DoS the system by consuming too much of this precious resource.
+
+Kernel memory limits are not imposed for the root cgroup. Usage for the root
+cgroup may or may not be accounted.
+
+Currently no soft limit is implemented for kernel memory. It is future work
+to trigger slab reclaim when those limits are reached.
+
+2.7.1 Current Kernel Memory resources accounted
+
+* sockets memory pressure: some sockets protocols have memory pressure
+thresholds. The Memory Controller allows them to be controlled individually
+per cgroup, instead of globally.
+
+* tcp memory pressure: sockets memory pressure for the tcp protocol.
+
 3. User Interface
 
 0. Configuration
@@ -386,8 +410,11 @@
 cache		- # of bytes of page cache memory.
 rss		- # of bytes of anonymous and swap cache memory.
 mapped_file	- # of bytes of mapped file (includes tmpfs/shmem)
-pgpgin		- # of pages paged in (equivalent to # of charging events).
-pgpgout		- # of pages paged out (equivalent to # of uncharging events).
+pgpgin		- # of charging events to the memory cgroup. The charging
+		event happens each time a page is accounted as either mapped
+		anon page(RSS) or cache page(Page Cache) to the cgroup.
+pgpgout		- # of uncharging events to the memory cgroup. The uncharging
+		event happens each time a page is unaccounted from the cgroup.
 swap		- # of bytes of swap usage
 inactive_anon	- # of bytes of anonymous memory and swap cache memory on
 		LRU list.
diff --git a/Documentation/cgroups/net_prio.txt b/Documentation/cgroups/net_prio.txt
new file mode 100644
index 0000000..01b3226
--- /dev/null
+++ b/Documentation/cgroups/net_prio.txt
@@ -0,0 +1,53 @@
+Network priority cgroup
+-------------------------
+
+The Network priority cgroup provides an interface to allow an administrator to
+dynamically set the priority of network traffic generated by various
+applications
+
+Nominally, an application would set the priority of its traffic via the
+SO_PRIORITY socket option.  This however, is not always possible because:
+
+1) The application may not have been coded to set this value
+2) The priority of application traffic is often a site-specific administrative
+   decision rather than an application defined one.
+
+This cgroup allows an administrator to assign a process to a group which defines
+the priority of egress traffic on a given interface. Network priority groups can
+be created by first mounting the cgroup filesystem.
+
+# mount -t cgroup -onet_prio none /sys/fs/cgroup/net_prio
+
+With the above step, the initial group acting as the parent accounting group
+becomes visible at '/sys/fs/cgroup/net_prio'.  This group includes all tasks in
+the system. '/sys/fs/cgroup/net_prio/tasks' lists the tasks in this cgroup.
+
+Each net_prio cgroup contains two files that are subsystem specific
+
+net_prio.prioidx
+This file is read-only, and is simply informative.  It contains a unique integer
+value that the kernel uses as an internal representation of this cgroup.
+
+net_prio.ifpriomap
+This file contains a map of the priorities assigned to traffic originating from
+processes in this group and egressing the system on various interfaces. It
+contains a list of tuples in the form <ifname priority>.  Contents of this file
+can be modified by echoing a string into the file using the same tuple format.
+for example:
+
+echo "eth0 5" > /sys/fs/cgroups/net_prio/iscsi/net_prio.ifpriomap
+
+This command would force any traffic originating from processes belonging to the
+iscsi net_prio cgroup and egressing on interface eth0 to have the priority of
+said traffic set to the value 5. The parent accounting group also has a
+writeable 'net_prio.ifpriomap' file that can be used to set a system default
+priority.
+
+Priorities are set immediately prior to queueing a frame to the device
+queueing discipline (qdisc) so priorities will be assigned prior to the hardware
+queue selection being made.
+
+One usage for the net_prio cgroup is with mqprio qdisc allowing application
+traffic to be steered to hardware/driver based traffic classes. These mappings
+can then be managed by administrators or other networking protocols such as
+DCBX.
diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt
index 96b6903..cf44eb6 100644
--- a/Documentation/coccinelle.txt
+++ b/Documentation/coccinelle.txt
@@ -102,9 +102,15 @@
 	make coccicheck COCCI=<my_SP.cocci> MODE=report
 
 
- Using Coccinelle on (modified) files
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ Controlling Which Files are Processed by Coccinelle
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+By default the entire kernel source tree is checked.
 
+To apply Coccinelle to a specific directory, M= can be used.
+For example, to check drivers/net/wireless/ one may write:
+
+    make coccicheck M=drivers/net/wireless/
+    
 To apply Coccinelle on a file basis, instead of a directory basis, the
 following command may be used:
 
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index d221781..c7a2eb8 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -127,7 +127,7 @@
 echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) \
     >ondemand/sampling_rate
 
-show_sampling_rate_min:
+sampling_rate_min:
 The sampling rate is limited by the HW transition latency:
 transition_latency * 100
 Or by kernel restrictions:
@@ -140,8 +140,6 @@
 The highest value of kernel and HW latency restrictions is shown and
 used as the minimum sampling rate.
 
-show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT.
-
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
 whether it should increase the frequency.  For example when it is set
diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting
index 903a254..8a48c9b 100644
--- a/Documentation/development-process/5.Posting
+++ b/Documentation/development-process/5.Posting
@@ -271,10 +271,10 @@
    the linux-kernel list.
 
  - If you are fixing a bug, think about whether the fix should go into the
-   next stable update.  If so, stable@kernel.org should get a copy of the
-   patch.  Also add a "Cc: stable@kernel.org" to the tags within the patch
-   itself; that will cause the stable team to get a notification when your
-   fix goes into the mainline.
+   next stable update.  If so, stable@vger.kernel.org should get a copy of
+   the patch.  Also add a "Cc: stable@vger.kernel.org" to the tags within
+   the patch itself; that will cause the stable team to get a notification
+   when your fix goes into the mainline.
 
 When selecting recipients for a patch, it is good to have an idea of who
 you think will eventually accept the patch and get it merged.  While it
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index eccffe7..0038318 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -379,7 +379,7 @@
 		162 = /dev/smbus	System Management Bus
 		163 = /dev/lik		Logitech Internet Keyboard
 		164 = /dev/ipmo		Intel Intelligent Platform Management
-		165 = /dev/vmmon	VMWare virtual machine monitor
+		165 = /dev/vmmon	VMware virtual machine monitor
 		166 = /dev/i2o/ctl	I2O configuration manager
 		167 = /dev/specialix_sxctl Specialix serial control
 		168 = /dev/tcldrv	Technology Concepts serial control
@@ -447,6 +447,9 @@
 		234 = /dev/btrfs-control	Btrfs control device
 		235 = /dev/autofs	Autofs control device
 		236 = /dev/mapper/control	Device-Mapper control device
+		237 = /dev/loop-control Loopback control device
+		238 = /dev/vhost-net	Host kernel accelerator for virtio net
+
 		240-254			Reserved for local use
 		255			Reserved for MISC_DYNAMIC_MINOR
 
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index c9848ad..54bddda 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -21,6 +21,10 @@
 Required root node properties:
     - compatible = "fsl,imx53-smd", "fsl,imx53";
 
-i.MX6 Quad SABRE Automotive Board
+i.MX6 Quad Armadillo2 Board
 Required root node properties:
-    - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+    - compatible = "fsl,imx6q-arm2", "fsl,imx6q";
+
+i.MX6 Quad SABRE Lite Board
+Required root node properties:
+    - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index 52916b4..9b4b82a 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -42,6 +42,10 @@
 - interrupts	: Interrupt source of the parent interrupt controller. Only
   present on secondary GICs.
 
+- cpu-offset	: per-cpu offset within the distributor and cpu interface
+  regions, used when the GIC doesn't have banked registers. The offset is
+  cpu-offset * cpu-nr.
+
 Example:
 
 	intc: interrupt-controller@fff11000 {
diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt
new file mode 100644
index 0000000..524c3dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/insignal-boards.txt
@@ -0,0 +1,8 @@
+* Insignal's Exynos4210 based Origen evaluation board
+
+Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC.
+
+Required root node properties:
+    - compatible = should be one or more of the following.
+        (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
+        (b) "samsung,exynos4210"  - for boards based on Exynos4210 SoC.
diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt
new file mode 100644
index 0000000..0bf68be
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt
@@ -0,0 +1,8 @@
+* Samsung's Exynos4210 based SMDKV310 evaluation board
+
+SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC.
+
+Required root node properties:
+    - compatible = should be one or more of the following.
+        (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
+        (b) "samsung,exynos4210"  - for boards based on Exynos4210 SoC.
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
new file mode 100644
index 0000000..6e69d2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -0,0 +1,14 @@
+NVIDIA Tegra device tree bindings
+-------------------------------------------
+
+Boards with the tegra20 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "nvidia,tegra20";
+
+Boards with the tegra30 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "nvidia,tegra30";
diff --git a/Documentation/devicetree/bindings/arm/vic.txt b/Documentation/devicetree/bindings/arm/vic.txt
new file mode 100644
index 0000000..266716b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vic.txt
@@ -0,0 +1,29 @@
+* ARM Vectored Interrupt Controller
+
+One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM
+system for interrupt routing.  For multiple controllers they can either be
+nested or have the outputs wire-OR'd together.
+
+Required properties:
+
+- compatible : should be one of
+	"arm,pl190-vic"
+	"arm,pl192-vic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : The number of cells to define the interrupts.  Must be 1 as
+  the VIC has no configuration options for interrupt sources.  The cell is a u32
+  and defines the interrupt number.
+- reg : The register bank for the VIC.
+
+Optional properties:
+
+- interrupts : Interrupt source for parent controllers if the VIC is nested.
+
+Example:
+
+	vic0: interrupt-controller@60000 {
+		compatible = "arm,pl192-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x60000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/c6x/clocks.txt b/Documentation/devicetree/bindings/c6x/clocks.txt
new file mode 100644
index 0000000..a04f5fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/c6x/clocks.txt
@@ -0,0 +1,40 @@
+C6X PLL Clock Controllers
+-------------------------
+
+This is a first-cut support for the SoC clock controllers. This is still
+under development and will probably change as the common device tree
+clock support is added to the kernel.
+
+Required properties:
+
+- compatible: "ti,c64x+pll"
+    May also have SoC-specific value to support SoC-specific initialization
+    in the driver. One of:
+        "ti,c6455-pll"
+        "ti,c6457-pll"
+        "ti,c6472-pll"
+        "ti,c6474-pll"
+
+- reg: base address and size of register area
+- clock-frequency: input clock frequency in hz
+
+
+Optional properties:
+
+- ti,c64x+pll-bypass-delay: CPU cycles to delay when entering bypass mode
+
+- ti,c64x+pll-reset-delay:  CPU cycles to delay after PLL reset
+
+- ti,c64x+pll-lock-delay:   CPU cycles to delay after PLL frequency change
+
+Example:
+
+	clock-controller@29a0000 {
+		compatible = "ti,c6472-pll", "ti,c64x+pll";
+		reg = <0x029a0000 0x200>;
+		clock-frequency = <25000000>;
+
+		ti,c64x+pll-bypass-delay = <200>;
+		ti,c64x+pll-reset-delay = <12000>;
+		ti,c64x+pll-lock-delay = <80000>;
+	};
diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt
new file mode 100644
index 0000000..d847758
--- /dev/null
+++ b/Documentation/devicetree/bindings/c6x/dscr.txt
@@ -0,0 +1,127 @@
+Device State Configuration Registers
+------------------------------------
+
+TI C6X SoCs contain a region of miscellaneous registers which provide various
+function for SoC control or status. Details vary considerably among from SoC
+to SoC with no two being alike.
+
+In general, the Device State Configuraion Registers (DSCR) will provide one or
+more configuration registers often protected by a lock register where one or
+more key values must be written to a lock register in order to unlock the
+configuration register for writes. These configuration register may be used to
+enable (and disable in some cases) SoC pin drivers, select peripheral clock
+sources (internal or pin), etc. In some cases, a configuration register is
+write once or the individual bits are write once. In addition to device config,
+the DSCR block may provide registers which which are used to reset peripherals,
+provide device ID information, provide ethernet MAC addresses, as well as other
+miscellaneous functions.
+
+For device state control (enable/disable), each device control is assigned an
+id which is used by individual device drivers to control the state as needed.
+
+Required properties:
+
+- compatible: must be "ti,c64x+dscr"
+- reg: register area base and size
+
+Optional properties:
+
+  NOTE: These are optional in that not all SoCs will have all properties. For
+        SoCs which do support a given property, leaving the property out of the
+        device tree will result in reduced functionality or possibly driver
+        failure.
+
+- ti,dscr-devstat
+    offset of the devstat register
+
+- ti,dscr-silicon-rev
+    offset, start bit, and bitsize of silicon revision field
+
+- ti,dscr-rmii-resets
+    offset and bitmask of RMII reset field. May have multiple tuples if more
+    than one ethernet port is available.
+
+- ti,dscr-locked-regs
+    possibly multiple tuples describing registers which are write protected by
+    a lock register. Each tuple consists of the register offset, lock register
+    offsset, and the key value used to unlock the register.
+
+- ti,dscr-kick-regs
+    offset and key values of two "kick" registers used to write protect other
+    registers in DSCR. On SoCs using kick registers, the first key must be
+    written to the first kick register and the second key must be written to
+    the second register before other registers in the area are write-enabled.
+
+- ti,dscr-mac-fuse-regs
+    MAC addresses are contained in two registers. Each element of a MAC address
+    is contained in a single byte. This property has two tuples. Each tuple has
+    a register offset and four cells representing bytes in the register from
+    most significant to least. The value of these four cells is the MAC byte
+    index (1-6) of the byte within the register. A value of 0 means the byte
+    is unused in the MAC address.
+
+- ti,dscr-devstate-ctl-regs
+    This property describes the bitfields used to control the state of devices.
+    Each tuple describes a range of identical bitfields used to control one or
+    more devices (one bitfield per device). The layout of each tuple is:
+
+        start_id num_ids reg enable disable start_bit nbits
+
+    Where:
+        start_id is device id for the first device control in the range
+        num_ids is the number of device controls in the range
+        reg is the offset of the register holding the control bits
+        enable is the value to enable a device
+        disable is the value to disable a device (0xffffffff if cannot disable)
+        start_bit is the bit number of the first bit in the range
+        nbits is the number of bits per device control
+
+- ti,dscr-devstate-stat-regs
+    This property describes the bitfields used to provide device state status
+    for device states controlled by the DSCR. Each tuple describes a range of
+    identical bitfields used to provide status for one or more devices (one
+    bitfield per device). The layout of each tuple is:
+
+        start_id num_ids reg enable disable start_bit nbits
+
+    Where:
+        start_id is device id for the first device status in the range
+        num_ids is the number of devices covered by the range
+        reg is the offset of the register holding the status bits
+        enable is the value indicating device is enabled
+        disable is the value indicating device is disabled
+        start_bit is the bit number of the first bit in the range
+        nbits is the number of bits per device status
+
+- ti,dscr-privperm
+    Offset and default value for register used to set access privilege for
+    some SoC devices.
+
+
+Example:
+
+	device-state-config-regs@2a80000 {
+		compatible = "ti,c64x+dscr";
+		reg = <0x02a80000 0x41000>;
+
+		ti,dscr-devstat = <0>;
+		ti,dscr-silicon-rev = <8 28 0xf>;
+		ti,dscr-rmii-resets = <0x40020 0x00040000>;
+
+		ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>;
+		ti,dscr-devstate-ctl-regs =
+			 <0 12 0x40008 1 0  0  2
+			  12 1 0x40008 3 0 30  2
+			  13 2 0x4002c 1 0xffffffff 0 1>;
+		ti,dscr-devstate-stat-regs =
+			<0 10 0x40014 1 0  0  3
+			 10 2 0x40018 1 0  0  3>;
+
+		ti,dscr-mac-fuse-regs = <0x700 1 2 3 4
+					 0x704 5 6 0 0>;
+
+		ti,dscr-privperm = <0x41c 0xaaaaaaaa>;
+
+		ti,dscr-kick-regs = <0x38 0x83E70B13
+				     0x3c 0x95A4F1E0>;
+	};
diff --git a/Documentation/devicetree/bindings/c6x/emifa.txt b/Documentation/devicetree/bindings/c6x/emifa.txt
new file mode 100644
index 0000000..0ff6e9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/c6x/emifa.txt
@@ -0,0 +1,62 @@
+External Memory Interface
+-------------------------
+
+The emifa node describes a simple external bus controller found on some C6X
+SoCs. This interface provides external busses with a number of chip selects.
+
+Required properties:
+
+- compatible: must be "ti,c64x+emifa", "simple-bus"
+- reg: register area base and size
+- #address-cells: must be 2 (chip-select + offset)
+- #size-cells: must be 1
+- ranges: mapping from EMIFA space to parent space
+
+
+Optional properties:
+
+- ti,dscr-dev-enable: Device ID if EMIF is enabled/disabled from DSCR
+
+- ti,emifa-burst-priority:
+      Number of memory transfers after which the EMIF will elevate the priority
+      of the oldest command in the command FIFO. Setting this field to 255
+      disables this feature, thereby allowing old commands to stay in the FIFO
+      indefinitely.
+
+- ti,emifa-ce-config:
+      Configuration values for each of the supported chip selects.
+
+Example:
+
+	emifa@70000000 {
+		compatible = "ti,c64x+emifa", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x70000000 0x100>;
+		ranges = <0x2 0x0 0xa0000000 0x00000008
+		          0x3 0x0 0xb0000000 0x00400000
+			  0x4 0x0 0xc0000000 0x10000000
+			  0x5 0x0 0xD0000000 0x10000000>;
+
+		ti,dscr-dev-enable = <13>;
+		ti,emifa-burst-priority = <255>;
+		ti,emifa-ce-config = <0x00240120
+				      0x00240120
+				      0x00240122
+				      0x00240122>;
+
+		flash@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x3 0x0 0x400000>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0 {
+				reg = <0x0 0x400000>;
+				label = "NOR";
+			};
+		};
+	};
+
+This shows a flash chip attached to chip select 3.
diff --git a/Documentation/devicetree/bindings/c6x/interrupt.txt b/Documentation/devicetree/bindings/c6x/interrupt.txt
new file mode 100644
index 0000000..42bb796
--- /dev/null
+++ b/Documentation/devicetree/bindings/c6x/interrupt.txt
@@ -0,0 +1,104 @@
+C6X Interrupt Chips
+-------------------
+
+* C64X+ Core Interrupt Controller
+
+  The core interrupt controller provides 16 prioritized interrupts to the
+  C64X+ core. Priority 0 and 1 are used for reset and NMI respectively.
+  Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt
+  sources coming from outside the core.
+
+  Required properties:
+  --------------------
+  - compatible: Should be "ti,c64x+core-pic";
+  - #interrupt-cells: <1>
+
+  Interrupt Specifier Definition
+  ------------------------------
+  Single cell specifying the core interrupt priority level (4-15) where
+  4 is highest priority and 15 is lowest priority.
+
+  Example
+  -------
+  core_pic: interrupt-controller@0 {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+	compatible = "ti,c64x+core-pic";
+  };
+
+
+
+* C64x+ Megamodule Interrupt Controller
+
+  The megamodule PIC consists of four interrupt mupliplexers each of which
+  combine up to 32 interrupt inputs into a single interrupt output which
+  may be cascaded into the core interrupt controller. The megamodule PIC
+  has a total of 12 outputs cascading into the core interrupt controller.
+  One for each core interrupt priority level. In addition to the combined
+  interrupt sources, individual megamodule interrupts may be cascaded to
+  the core interrupt controller. When an individual interrupt is cascaded,
+  it is no longer handled through a megamodule interrupt combiner and is
+  considered to have the core interrupt controller as the parent.
+
+  Required properties:
+  --------------------
+  - compatible: "ti,c64x+megamod-pic"
+  - interrupt-controller
+  - #interrupt-cells: <1>
+  - reg: base address and size of register area
+  - interrupt-parent: must be core interrupt controller
+  - interrupts: This should have four cells; one for each interrupt combiner.
+                The cells contain the core priority interrupt to which the
+                corresponding combiner output is wired.
+
+  Optional properties:
+  --------------------
+  - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core
+                             priority interrupts. The first cell corresponds to
+                             core priority 4 and the last cell corresponds to
+                             core priority 15. The value of each cell is the
+                             megamodule interrupt source which is MUXed to
+                             the core interrupt corresponding to the cell
+                             position. Allowed values are 4 - 127. Mapping for
+                             interrupts 0 - 3 (combined interrupt sources) are
+                             ignored.
+
+  Interrupt Specifier Definition
+  ------------------------------
+  Single cell specifying the megamodule interrupt source (4-127). Note that
+  interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will
+  use the core interrupt controller as their parent and the specifier will
+  be the core priority level, not the megamodule interrupt number.
+
+  Examples
+  --------
+  megamod_pic: interrupt-controller@1800000 {
+	compatible = "ti,c64x+megamod-pic";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+	reg = <0x1800000 0x1000>;
+	interrupt-parent = <&core_pic>;
+	interrupts = < 12 13 14 15 >;
+  };
+
+  This is a minimal example where all individual interrupts go through a
+  combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped
+  to interrupt 13, etc.
+
+
+  megamod_pic: interrupt-controller@1800000 {
+	compatible = "ti,c64x+megamod-pic";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+	reg = <0x1800000 0x1000>;
+	interrupt-parent = <&core_pic>;
+	interrupts = < 12 13 14 15 >;
+	ti,c64x+megamod-pic-mux = <  0  0  0  0
+                                    32  0  0  0
+                                     0  0  0  0 >;
+  };
+
+  This the same as the first example except that megamodule interrupt 32 is
+  mapped directly to core priority interrupt 8. The node using this interrupt
+  must set the core controller as its interrupt parent and use 8 in the
+  interrupt specifier value.
diff --git a/Documentation/devicetree/bindings/c6x/soc.txt b/Documentation/devicetree/bindings/c6x/soc.txt
new file mode 100644
index 0000000..b1e4973
--- /dev/null
+++ b/Documentation/devicetree/bindings/c6x/soc.txt
@@ -0,0 +1,28 @@
+C6X System-on-Chip
+------------------
+
+Required properties:
+
+- compatible: "simple-bus"
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges
+
+Optional properties:
+
+- model: specific SoC model
+
+- nodes for IP blocks within SoC
+
+
+Example:
+
+	soc {
+		compatible = "simple-bus";
+		model = "tms320c6455";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		...
+	};
diff --git a/Documentation/devicetree/bindings/c6x/timer64.txt b/Documentation/devicetree/bindings/c6x/timer64.txt
new file mode 100644
index 0000000..95911fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/c6x/timer64.txt
@@ -0,0 +1,26 @@
+Timer64
+-------
+
+The timer64 node describes C6X event timers.
+
+Required properties:
+
+- compatible: must be "ti,c64x+timer64"
+- reg: base address and size of register region
+- interrupt-parent: interrupt controller
+- interrupts: interrupt id
+
+Optional properties:
+
+- ti,dscr-dev-enable: Device ID used to enable timer IP through DSCR interface.
+
+- ti,core-mask: on multi-core SoCs, bitmask of cores allowed to use this timer.
+
+Example:
+	timer0: timer@25e0000 {
+		compatible = "ti,c64x+timer64";
+		ti,core-mask = < 0x01 >;
+		reg = <0x25e0000 0x40>;
+		interrupt-parent = <&megamod_pic>;
+		interrupts = < 16 >;
+	};
diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
new file mode 100644
index 0000000..a4cd273
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt
@@ -0,0 +1,30 @@
+* ARM PrimeCell PL330 DMA Controller
+
+The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+between memory and peripherals or memory to memory.
+
+Required properties:
+  - compatible: should include both "arm,pl330" and "arm,primecell".
+  - reg: physical base address of the controller and length of memory mapped
+    region.
+  - interrupts: interrupt number to the cpu.
+
+Example:
+
+	pdma0: pdma@12680000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x12680000 0x1000>;
+		interrupts = <99>;
+	};
+
+Client drivers (device nodes requiring dma transfers from dev-to-mem or
+mem-to-dev) should specify the DMA channel numbers using a two-value pair
+as shown below.
+
+  [property name]  = <[phandle of the dma controller] [dma request id]>;
+
+      where 'dma request id' is the dma request number which is connected
+      to the client controller. The 'property name' is recommended to be
+      of the form <name>-dma-channel.
+
+  Example:  tx-dma-channel = <&pdma0 12>;
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
new file mode 100644
index 0000000..3c046ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -0,0 +1,14 @@
+* Atmel Direct Memory Access Controller (DMA)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-dma"
+- reg: Should contain DMA registers location and length
+- interrupts: Should contain DMA interrupt
+
+Examples:
+
+dma@ffffec00 {
+	compatible = "atmel,at91sam9g45-dma";
+	reg = <0xffffec00 0x200>;
+	interrupts = <21>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
new file mode 100644
index 0000000..8f50fe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -0,0 +1,40 @@
+Samsung Exynos4 GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "samsung,exynos4-gpio>".
+
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+
+- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
+  should be the following with values derived from the SoC user manual.
+     <[phandle of the gpio controller node]
+      [pin number within the gpio controller]
+      [mux function]
+      [pull up/down]
+      [drive strength]>
+
+  Values for gpio specifier:
+  - Pin number: is a value between 0 to 7.
+  - Pull Up/Down: 0 - Pull Up/Down Disabled.
+                  1 - Pull Down Enabled.
+                  3 - Pull Up Enabled.
+  - Drive Strength: 0 - 1x,
+                    1 - 3x,
+                    2 - 2x,
+                    3 - 4x
+
+- gpio-controller: Specifies that the node is a gpio controller.
+- #address-cells: should be 1.
+- #size-cells: should be 1.
+
+Example:
+
+	gpa0: gpio-controller@11400000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "samsung,exynos4-gpio";
+		reg = <0x11400000 0x20>;
+		#gpio-cells = <4>;
+		gpio-controller;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
new file mode 100644
index 0000000..e42a2ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -0,0 +1,22 @@
+* Synopsys DesignWare I2C
+
+Required properties :
+
+ - compatible : should be "snps,designware-i2c"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number.
+
+Recommended properties :
+
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Example :
+
+	i2c@f0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,designware-i2c";
+		reg = <0xf0000 0x1000>;
+		interrupts = <11>;
+		clock-frequency = <400000>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/omap-i2c.txt b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
new file mode 100644
index 0000000..56564aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
@@ -0,0 +1,30 @@
+I2C for OMAP platforms
+
+Required properties :
+- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Recommended properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
+  the default 100 kHz frequency will be used.
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Note: Current implementation will fetch base address, irq and dma
+from omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Examples :
+
+i2c1: i2c@0 {
+    compatible = "ti,omap3-i2c";
+    #address-cells = <1>;
+    #size-cells = <0>;
+    ti,hwmods = "i2c1";
+    clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
new file mode 100644
index 0000000..1a85f98
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -0,0 +1,58 @@
+This is a list of trivial i2c devices that have simple device tree
+bindings, consisting only of a compatible field, an address and
+possibly an interrupt line.
+
+If a device needs more specific bindings, such as properties to
+describe some aspect of it, there needs to be a specific binding
+document for it just like any other devices.
+
+
+Compatible		Vendor / Chip
+==========		=============
+ad,ad7414		SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
+ad,adm9240		ADM9240:  Complete System Hardware Monitor for uProcessor-Based Systems
+adi,adt7461		+/-1C TDM Extended Temp Range I.C
+adt7461			+/-1C TDM Extended Temp Range I.C
+at,24c08		i2c serial eeprom  (24cxx)
+atmel,24c02		i2c serial eeprom  (24cxx)
+catalyst,24c32		i2c serial eeprom
+dallas,ds1307		64 x 8, Serial, I2C Real-Time Clock
+dallas,ds1338		I2C RTC with 56-Byte NV RAM
+dallas,ds1339		I2C Serial Real-Time Clock
+dallas,ds1340		I2C RTC with Trickle Charger
+dallas,ds1374		I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
+dallas,ds1631		High-Precision Digital Thermometer
+dallas,ds1682		Total-Elapsed-Time Recorder with Alarm
+dallas,ds1775		Tiny Digital Thermometer and Thermostat
+dallas,ds3232		Extremely Accurate I²C RTC with Integrated Crystal and SRAM
+dallas,ds4510		CPU Supervisor with Nonvolatile Memory and Programmable I/O
+dallas,ds75		Digital Thermometer and Thermostat
+dialog,da9053		DA9053: flexible system level PMIC with multicore support
+epson,rx8025		High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
+epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
+fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
+fsl,mma8450		MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
+fsl,mpr121		MPR121: Proximity Capacitive Touch Sensor Controller
+fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
+maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
+maxim,max1237		Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
+maxim,max6625		9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
+mc,rv3029c2		Real Time Clock Module with I2C-Bus
+national,lm75		I2C TEMP SENSOR
+national,lm80		Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
+national,lm92		±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
+nxp,pca9556		Octal SMBus and I2C registered interface
+nxp,pca9557		8-bit I2C-bus and SMBus I/O port with reset
+nxp,pcf8563		Real-time clock/calendar
+ovti,ov5642		OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
+pericom,pt7c4338	Real-time Clock Module
+plx,pex8648		48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
+ramtron,24c64		i2c serial eeprom  (24cxx)
+ricoh,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+samsung,24ad0xd1	S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
+st-micro,24c256		i2c serial eeprom  (24cxx)
+stm,m41t00		Serial Access TIMEKEEPER
+stm,m41t62		Serial real-time clock (RTC) with alarm
+stm,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
+ti,tsc2003		I2C Touch-Screen Controller
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
new file mode 100644
index 0000000..ce3e394
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -0,0 +1,88 @@
+* Samsung's Keypad Controller device tree bindings
+
+Samsung's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+  - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad
+    controller.
+  - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad
+    controller.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- interrupts: The interrupt number to the cpu.
+
+Required Board Specific Properties:
+- samsung,keypad-num-rows: Number of row lines connected to the keypad
+  controller.
+
+- samsung,keypad-num-columns: Number of column lines connected to the
+  keypad controller.
+
+- row-gpios: List of gpios used as row lines. The gpio specifier for
+  this property depends on the gpio controller to which these row lines
+  are connected.
+
+- col-gpios: List of gpios used as column lines. The gpio specifier for
+  this property depends on the gpio controller to which these column
+  lines are connected.
+
+- Keys represented as child nodes: Each key connected to the keypad
+  controller is represented as a child node to the keypad controller
+  device node and should include the following properties.
+  - keypad,row: the row number to which the key is connected.
+  - keypad,column: the column number to which the key is connected.
+  - linux,code: the key-code to be reported when the key is pressed
+    and released.
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+- linux,keypad-wakeup: use any event on keypad as wakeup event.
+
+
+Example:
+	keypad@100A0000 {
+		compatible = "samsung,s5pv210-keypad";
+		reg = <0x100A0000 0x100>;
+		interrupts = <173>;
+		samsung,keypad-num-rows = <2>;
+		samsung,keypad-num-columns = <8>;
+		linux,input-no-autorepeat;
+		linux,input-wakeup;
+
+		row-gpios = <&gpx2 0 3 3 0
+			     &gpx2 1 3 3 0>;
+
+		col-gpios = <&gpx1 0 3 0 0
+			     &gpx1 1 3 0 0
+			     &gpx1 2 3 0 0
+			     &gpx1 3 3 0 0
+			     &gpx1 4 3 0 0
+			     &gpx1 5 3 0 0
+			     &gpx1 6 3 0 0
+			     &gpx1 7 3 0 0>;
+
+		key_1 {
+			keypad,row = <0>;
+			keypad,column = <3>;
+			linux,code = <2>;
+		};
+
+		key_2 {
+			keypad,row = <0>;
+			keypad,column = <4>;
+			linux,code = <3>;
+		};
+
+		key_3 {
+			keypad,row = <0>;
+			keypad,column = <5>;
+			linux,code = <4>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/input/tegra-kbc.txt b/Documentation/devicetree/bindings/input/tegra-kbc.txt
new file mode 100644
index 0000000..5ecfa99
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/tegra-kbc.txt
@@ -0,0 +1,18 @@
+* Tegra keyboard controller
+
+Required properties:
+- compatible: "nvidia,tegra20-kbc"
+
+Optional properties:
+- debounce-delay: delay in milliseconds per row scan for debouncing
+- repeat-delay: delay in milliseconds before repeat starts
+- ghost-filter: enable ghost filtering for this device
+- wakeup-source: configure keyboard as a wakeup source for suspend/resume
+
+Example:
+
+keyboard: keyboard {
+	compatible = "nvidia,tegra20-kbc";
+	reg = <0x7000e200 0x100>;
+	ghost-filter;
+};
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
new file mode 100644
index 0000000..19f6af4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -0,0 +1,78 @@
+* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
+
+Optional properties:
+- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
+- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
+- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
+- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
+
+Sub-nodes:
+- regulators : Contain the regulator nodes.  The MC13892 regulators are
+  bound using their names as listed below with their registers and bits
+  for enabling.
+
+    vcoincell : regulator VCOINCELL (register 13, bit 23)
+    sw1       : regulator SW1	    (register 24, bit 0)
+    sw2       : regulator SW2	    (register 25, bit 0)
+    sw3       : regulator SW3	    (register 26, bit 0)
+    sw4       : regulator SW4	    (register 27, bit 0)
+    swbst     : regulator SWBST	    (register 29, bit 20)
+    vgen1     : regulator VGEN1	    (register 32, bit 0)
+    viohi     : regulator VIOHI	    (register 32, bit 3)
+    vdig      : regulator VDIG	    (register 32, bit 9)
+    vgen2     : regulator VGEN2	    (register 32, bit 12)
+    vpll      : regulator VPLL	    (register 32, bit 15)
+    vusb2     : regulator VUSB2	    (register 32, bit 18)
+    vgen3     : regulator VGEN3	    (register 33, bit 0)
+    vcam      : regulator VCAM	    (register 33, bit 6)
+    vvideo    : regulator VVIDEO    (register 33, bit 12)
+    vaudio    : regulator VAUDIO    (register 33, bit 15)
+    vsd       : regulator VSD	    (register 33, bit 18)
+    gpo1      : regulator GPO1	    (register 34, bit 6)
+    gpo2      : regulator GPO2	    (register 34, bit 8)
+    gpo3      : regulator GPO3	    (register 34, bit 10)
+    gpo4      : regulator GPO4	    (register 34, bit 12)
+    pwgt1spi  : regulator PWGT1SPI  (register 34, bit 15)
+    pwgt2spi  : regulator PWGT2SPI  (register 34, bit 16)
+    vusb      : regulator VUSB	    (register 50, bit 3)
+
+  The bindings details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+Examples:
+
+ecspi@70010000 { /* ECSPI1 */
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
+		   <&gpio3 25 0>; /* GPIO4_25 */
+	status = "okay";
+
+	pmic: mc13892@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8>;
+
+		regulators {
+			sw1_reg: mc13892__sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: mc13892__sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt
new file mode 100644
index 0000000..a66fcf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt
@@ -0,0 +1,47 @@
+Texas Instruments TWL family
+
+The TWLs are Integrated Power Management Chips.
+Some version might contain much more analog function like
+USB transceiver or Audio amplifier.
+These chips are connected to an i2c bus.
+
+
+Required properties:
+- compatible : Must be "ti,twl4030";
+  For Integrated power-management/audio CODEC device used in OMAP3
+  based boards
+- compatible : Must be "ti,twl6030";
+  For Integrated power-management used in OMAP4 based boards
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the twl support several interrupts internally,
+  it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells = <1>;
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- Child nodes contain in the twl. The twl family is made of several variants
+  that support a different number of features.
+  The children nodes will thus depend of the capability of the variant.
+
+
+Example:
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+twl@48 {
+    compatible = "ti,twl6030";
+    reg = <0x48>;
+    interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+    interrupt-controller;
+    #interrupt-cells = <1>;
+    interrupt-parent = <&gic>;
+    #address-cells = <1>;
+    #size-cells = <0>;
+
+    twl_rtc {
+        compatible = "ti,twl_rtc";
+        interrupts = <11>;
+        reg = <0>;
+    };
+};
diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
new file mode 100644
index 0000000..719f4dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
@@ -0,0 +1,44 @@
+GPIO assisted NAND flash
+
+The GPIO assisted NAND flash uses a memory mapped interface to
+read/write the NAND commands and data and GPIO pins for the control
+signals.
+
+Required properties:
+- compatible : "gpio-control-nand"
+- reg : should specify localbus chip select and size used for the chip.  The
+  resource describes the data bus connected to the NAND flash and all accesses
+  are made in native endianness.
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+- gpios : specifies the gpio pins to control the NAND device.  nwp is an
+  optional gpio and may be set to 0 if not present.
+
+Optional properties:
+- bank-width : Width (in bytes) of the device.  If not present, the width
+  defaults to 1 byte.
+- chip-delay : chip dependent delay for transferring data from array to
+  read registers (tR).  If not present then a default of 20us is used.
+- gpio-control-nand,io-sync-reg : A 64-bit physical address for a read
+  location used to guard against bus reordering with regards to accesses to
+  the GPIO's and the NAND flash data bus.  If present, then after changing
+  GPIO state and before and after command byte writes, this register will be
+  read to ensure that the GPIO accesses have completed.
+
+Examples:
+
+gpio-nand@1,0 {
+	compatible = "gpio-control-nand";
+	reg = <1 0x0000 0x2>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	gpios = <&banka 1 0	/* rdy */
+		 &banka 2 0 	/* nce */
+		 &banka 3 0 	/* ale */
+		 &banka 4 0 	/* cle */
+		 0		/* nwp */>;
+
+	partition@0 {
+	...
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
new file mode 100644
index 0000000..411727a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt
@@ -0,0 +1,15 @@
+* Calxeda Highbank 10Gb XGMAC Ethernet
+
+Required properties:
+- compatible : Should be "calxeda,hb-xgmac"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt.
+  The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt.
+
+Example:
+
+ethernet@fff50000 {
+        compatible = "calxeda,hb-xgmac";
+        reg = <0xfff50000 0x1000>;
+        interrupts = <0 77 4  0 78 4  0 79 4>;
+};
diff --git a/Documentation/devicetree/bindings/net/can/cc770.txt b/Documentation/devicetree/bindings/net/can/cc770.txt
new file mode 100644
index 0000000..77027bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/cc770.txt
@@ -0,0 +1,53 @@
+Memory mapped Bosch CC770 and Intel AN82527 CAN controller
+
+Note: The CC770 is a CAN controller from Bosch, which is 100%
+compatible with the old AN82527 from Intel, but with "bugs" being fixed.
+
+Required properties:
+
+- compatible : should be "bosch,cc770" for the CC770 and "intc,82527"
+	for the AN82527.
+
+- reg : should specify the chip select, address offset and size required
+	to map the registers of the controller. The size is usually 0x80.
+
+- interrupts : property with a value describing the interrupt source
+	(number and sensitivity) required for the controller.
+
+Optional properties:
+
+- bosch,external-clock-frequency : frequency of the external oscillator
+	clock in Hz. Note that the internal clock frequency used by the
+	controller is half of that value. If not specified, a default
+	value of 16000000 (16 MHz) is used.
+
+- bosch,clock-out-frequency : slock frequency in Hz on the CLKOUT pin.
+	If not specified or if the specified value is 0, the CLKOUT pin
+	will be disabled.
+
+- bosch,slew-rate : slew rate of the CLKOUT signal. If not specified,
+	a resonable value will be calculated.
+
+- bosch,disconnect-rx0-input : see data sheet.
+
+- bosch,disconnect-rx1-input : see data sheet.
+
+- bosch,disconnect-tx1-output : see data sheet.
+
+- bosch,polarity-dominant : see data sheet.
+
+- bosch,divide-memory-clock : see data sheet.
+
+- bosch,iso-low-speed-mux : see data sheet.
+
+For further information, please have a look to the CC770 or AN82527.
+
+Examples:
+
+can@3,100 {
+	compatible = "bosch,cc770";
+	reg = <3 0x100 0x80>;
+	interrupts = <2 0>;
+	interrupt-parent = <&mpic>;
+	bosch,external-clock-frequency = <16000000>;
+};
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
new file mode 100644
index 0000000..44afa0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -0,0 +1,25 @@
+* Cadence MACB/GEM Ethernet controller
+
+Required properties:
+- compatible: Should be "cdns,[<chip>-]{macb|gem}"
+  Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
+  Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
+  Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on
+  the Cadence GEM, or the generic form: "cdns,gem".
+- reg: Address and length of the register set for the device
+- interrupts: Should contain macb interrupt
+- phy-mode: String, operation mode of the PHY interface.
+  Supported values are: "mii", "rmii", "gmii", "rgmii".
+
+Optional properties:
+- local-mac-address: 6 bytes, mac address
+
+Examples:
+
+	macb0: ethernet@fffc4000 {
+		compatible = "cdns,at32ap7000-macb";
+		reg = <0xfffc4000 0x4000>;
+		interrupts = <21>;
+		phy-mode = "rmii";
+		local-mac-address = [3a 0e 03 04 05 06];
+	};
diff --git a/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt b/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt
new file mode 100644
index 0000000..5aeee53
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt
@@ -0,0 +1,9 @@
+NVIDIA compliant embedded controller
+
+Required properties:
+- compatible : should be "nvidia,nvec".
+- reg : the iomem of the i2c slave controller
+- interrupts : the interrupt line of the i2c slave controller
+- clock-frequency : the frequency of the i2c bus
+- gpios : the gpio used for ec request
+- slave-addr: the i2c address of the slave controller
diff --git a/Documentation/devicetree/bindings/power_supply/olpc_battery.txt b/Documentation/devicetree/bindings/power_supply/olpc_battery.txt
new file mode 100644
index 0000000..c8901b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/olpc_battery.txt
@@ -0,0 +1,5 @@
+OLPC battery
+~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "olpc,xo1-battery"
diff --git a/Documentation/devicetree/bindings/power_supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power_supply/sbs_sbs-battery.txt
new file mode 100644
index 0000000..c40e892
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/sbs_sbs-battery.txt
@@ -0,0 +1,23 @@
+SBS sbs-battery
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "sbs,sbs-battery"
+
+Optional properties :
+ - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
+   IO failure.
+ - sbs,poll-retry-count : The number of times to try looking for new status
+   after an external change notification.
+ - sbs,battery-detect-gpios : The gpio which signals battery detection and
+   a flag specifying its polarity.
+
+Example:
+
+	bq20z75@b {
+		compatible = "sbs,sbs-battery";
+		reg = < 0xb >;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <10>;
+		sbs,battery-detect-gpios = <&gpio-controller 122 1>;
+	}
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
new file mode 100644
index 0000000..b9a8a2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
@@ -0,0 +1,163 @@
+Message unit node:
+
+For SRIO controllers that implement the message unit as part of the controller
+this node is required.  For devices with RMAN this node should NOT exist.  The
+node is composed of three types of sub-nodes ("fsl-srio-msg-unit",
+"fsl-srio-dbell-unit" and "fsl-srio-port-write-unit").
+
+See srio.txt for more details about generic SRIO controller details.
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,srio-rmu-vX.Y", "fsl,srio-rmu".
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - fsl,liodn
+	Usage: optional-but-recommended (for devices with PAMU)
+	Value type: <prop-encoded-array>
+	Definition: The logical I/O device number for the PAMU (IOMMU) to be
+		correctly configured for SRIO accesses.  The property should
+		not exist on devices that do not support PAMU.
+
+		The LIODN value is associated with all RMU transactions
+		(msg-unit, doorbell, port-write).
+
+Sub-Nodes for RMU:  The RMU node is composed of multiple sub-nodes that
+correspond to the actual sub-controllers in the RMU.  The manual for a given
+SoC will detail which and how many of these sub-controllers are implemented.
+
+Message Unit:
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,srio-msg-unit-vX.Y", "fsl,srio-msg-unit".
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A pair of IRQs are specified in this property.  The first
+		element is associated with the transmit (TX) interrupt and the
+		second element is associated with the receive (RX) interrupt.
+
+Doorbell Unit:
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include:
+		"fsl,srio-dbell-unit-vX.Y", "fsl,srio-dbell-unit"
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A pair of IRQs are specified in this property.  The first
+		element is associated with the transmit (TX) interrupt and the
+		second element is associated with the receive (RX) interrupt.
+
+Port-Write Unit:
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include:
+		 "fsl,srio-port-write-unit-vX.Y", "fsl,srio-port-write-unit"
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A single IRQ that handles port-write conditions is
+		specified by this property.  (Typically shared with error).
+
+   Note: All other standard properties (see the ePAPR) are allowed
+   but are optional.
+
+Example:
+	rmu: rmu@d3000 {
+		compatible = "fsl,srio-rmu";
+		reg = <0xd3000 0x400>;
+		ranges = <0x0 0xd3000 0x400>;
+		fsl,liodn = <0xc8>;
+
+		message-unit@0 {
+			compatible = "fsl,srio-msg-unit";
+			reg = <0x0 0x100>;
+			interrupts = <
+				60 2 0 0  /* msg1_tx_irq */
+				61 2 0 0>;/* msg1_rx_irq */
+		};
+		message-unit@100 {
+			compatible = "fsl,srio-msg-unit";
+			reg = <0x100 0x100>;
+			interrupts = <
+				62 2 0 0  /* msg2_tx_irq */
+				63 2 0 0>;/* msg2_rx_irq */
+		};
+		doorbell-unit@400 {
+			compatible = "fsl,srio-dbell-unit";
+			reg = <0x400 0x80>;
+			interrupts = <
+				56 2 0 0  /* bell_outb_irq */
+				57 2 0 0>;/* bell_inb_irq */
+		};
+		port-write-unit@4e0 {
+			compatible = "fsl,srio-port-write-unit";
+			reg = <0x4e0 0x20>;
+			interrupts = <16 2 1 11>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
new file mode 100644
index 0000000..b039bcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
@@ -0,0 +1,103 @@
+* Freescale Serial RapidIO (SRIO) Controller
+
+RapidIO port node:
+Properties:
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,srio" for IP blocks with IP Block
+	Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
+
+	Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major
+	version in IP Block Revision Register and Y is Minor version.  If this
+	compatiable is provided it should be ordered before "fsl,srio".
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers.  The size should
+		be set to 0x11000.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A single IRQ that handles error conditions is specified by this
+		property.  (Typically shared with port-write).
+
+   - fsl,srio-rmu-handle:
+	Usage: required if rmu node is defined
+	Value type: <phandle>
+	Definition: A single <phandle> value that points to the RMU.
+	(See srio-rmu.txt for more details on RMU node binding)
+
+Port Child Nodes:  There should a port child node for each port that exists in
+the controller.  The ports are numbered starting at one (1) and should have
+the following properties:
+
+   - cell-index
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Matches the port id.
+
+   - ranges
+	Usage: required if local access windows preset
+	Value type: <prop-encoded-array>
+	Definition: A standard property. Utilized to describe the memory mapped
+		IO space utilized by the controller.  This corresponds to the
+		setting of the local access windows that are targeted to this
+		SRIO port.
+
+   - fsl,liodn
+	Usage: optional-but-recommended (for devices with PAMU)
+	Value type: <prop-encoded-array>
+	Definition: The logical I/O device number for the PAMU (IOMMU) to be
+		correctly configured for SRIO accesses.  The property should
+		not exist on devices that do not support PAMU.
+
+		For HW (ie, the P4080) that only supports a LIODN for both
+		memory and maintenance transactions then a single LIODN is
+		represented in the property for both transactions.
+
+		For HW (ie, the P304x/P5020, etc) that supports an LIODN for
+		memory transactions and a unique LIODN for maintenance
+		transactions then a pair of LIODNs are represented in the
+		property.  Within the pair, the first element represents the
+		LIODN associated with memory transactions and the second element
+		represents the LIODN associated with maintenance transactions
+		for the port.
+
+Note: All other standard properties (see ePAPR) are allowed but are optional.
+
+Example:
+
+	rapidio: rapidio@ffe0c0000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+		compatible = "fsl,srio";
+		interrupts = <16 2 1 11>; /* err_irq */
+		fsl,srio-rmu-handle = <&rmu>;
+		ranges;
+
+		port1 {
+			cell-index = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			fsl,liodn = <34>;
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+
+		port2 {
+			cell-index = <2>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			fsl,liodn = <48>;
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
new file mode 100644
index 0000000..9cf57fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -0,0 +1,29 @@
+Fixed Voltage regulators
+
+Required properties:
+- compatible: Must be "regulator-fixed";
+
+Optional properties:
+- gpio: gpio to use for enable control
+- startup-delay-us: startup time in microseconds
+- enable-active-high: Polarity of GPIO is Active high
+If this property is missing, the default assumed is Active low.
+
+Any property defined as part of the core regulator
+binding, defined in regulator.txt, can also be used.
+However a fixed voltage regulator is expected to have the
+regulator-min-microvolt and regulator-max-microvolt
+to be the same.
+
+Example:
+
+	abc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 16 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on
+	};
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
new file mode 100644
index 0000000..5b7a408
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -0,0 +1,54 @@
+Voltage/Current Regulators
+
+Optional properties:
+- regulator-name: A string used as a descriptive name for regulator outputs
+- regulator-min-microvolt: smallest voltage consumers may set
+- regulator-max-microvolt: largest voltage consumers may set
+- regulator-microvolt-offset: Offset applied to voltages to compensate for voltage drops
+- regulator-min-microamp: smallest current consumers may set
+- regulator-max-microamp: largest current consumers may set
+- regulator-always-on: boolean, regulator should never be disabled
+- regulator-boot-on: bootloader/firmware enabled regulator
+- <name>-supply: phandle to the parent supply/regulator node
+
+Example:
+
+	xyzreg: regulator@0 {
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+
+Regulator Consumers:
+Consumer nodes can reference one or more of its supplies/
+regulators using the below bindings.
+
+- <name>-supply: phandle to the regulator node
+
+These are the same bindings that a regulator in the above
+example used to reference its own supply, in which case
+its just seen as a special case of a regulator being a
+consumer itself.
+
+Example of a consumer device node (mmc) referencing two
+regulators (twl_reg1 and twl_reg2),
+
+	twl_reg1: regulator@0 {
+		...
+		...
+		...
+	};
+
+	twl_reg2: regulator@1 {
+		...
+		...
+		...
+	};
+
+	mmc: mmc@0x0 {
+		...
+		...
+		vmmc-supply = <&twl_reg1>;
+		vmmcaux-supply = <&twl_reg2>;
+	};
diff --git a/Documentation/devicetree/bindings/resource-names.txt b/Documentation/devicetree/bindings/resource-names.txt
new file mode 100644
index 0000000..e280fef
--- /dev/null
+++ b/Documentation/devicetree/bindings/resource-names.txt
@@ -0,0 +1,54 @@
+Some properties contain an ordered list of 1 or more datum which are
+normally accessed by index.  However, some devices will have multiple
+values which are more naturally accessed by name.  Device nodes can
+include a supplemental property for assigning names to each of the list
+items.  The names property consists of a list of strings in the same
+order as the data in the resource property.
+
+The following supplemental names properties are defined.
+
+Resource Property	Supplemental Names Property
+-----------------	---------------------------
+reg			reg-names
+clocks			clock-names
+interrupts		interrupt-names
+
+Usage:
+
+The -names property must be used in conjunction with the normal resource
+property. If not it will be ignored.
+
+Examples:
+
+l4-abe {
+	compatible = "simple-bus";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x48000000 0x00001000>, /* MPU path */
+		 <1 0 0x49000000 0x00001000>; /* L3 path */
+	mcasp {
+		compatible = "ti,mcasp";
+		reg = <0 0x10 0x10>, <0 0x20 0x10>,
+		      <1 0x10 0x10>, <1 0x20 0x10>;
+		reg-names = "mpu", "dat",
+			    "dma", "dma_dat";
+		interrupts = <11>, <12>;
+		interrupt-names = "rx", "tx";
+	};
+
+	timer {
+		compatible = "ti,timer";
+		reg = <0 0x40 0x10>, <1 0x40 0x10>;
+		reg-names = "mpu", "dma";
+	};
+};
+
+
+usb {
+	compatible = "ti,usb-host";
+	reg = <0x4a064000 0x800>, <0x4a064800 0x200>,
+	      <0x4a064c00 0x200>;
+	reg-names = "config", "ohci", "ehci";
+	interrupts = <14>, <15>;
+	interrupt-names = "ohci", "ehci";
+};
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
new file mode 100644
index 0000000..90ec45f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -0,0 +1,20 @@
+* Samsung's S3C Real Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+    * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc.
+    * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: Two interrupt numbers to the cpu should be specified. First
+  interrupt number is the rtc alarm interupt and second interrupt number
+  is the rtc tick interrupt. The number of cells representing a interrupt
+  depends on the parent interrupt controller.
+
+Example:
+
+	rtc@10070000 {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x10070000 0x100>;
+		interrupts = <44 0 45 0>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/twl-rtc.txt b/Documentation/devicetree/bindings/rtc/twl-rtc.txt
new file mode 100644
index 0000000..596e0c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/twl-rtc.txt
@@ -0,0 +1,12 @@
+* TI twl RTC
+
+The TWL family (twl4030/6030) contains a RTC.
+
+Required properties:
+- compatible : Should be twl4030-rtc
+
+Examples:
+
+rtc@0 {
+    compatible = "ti,twl4030-rtc";
+};
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
new file mode 100644
index 0000000..342eedd
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -0,0 +1,10 @@
+OMAP UART controller
+
+Required properties:
+- compatible : should be "ti,omap2-uart" for OMAP2 controllers
+- compatible : should be "ti,omap3-uart" for OMAP3 controllers
+- compatible : should be "ti,omap4-uart" for OMAP4 controllers
+- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
+
+Optional properties:
+- clock-frequency : frequency of the clock input to the UART
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
new file mode 100644
index 0000000..2c8a17c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.txt
@@ -0,0 +1,14 @@
+* Samsung's UART Controller
+
+The Samsung's UART controller is used for interfacing SoC with serial communicaion
+devices.
+
+Required properties:
+- compatible: should be
+  - "samsung,exynos4210-uart", for UART's compatible with Exynos4210 uart ports.
+
+- reg: base physical address of the controller and length of memory mapped
+  region.
+
+- interrupts: interrupt number to the cpu. The interrupt specifier format depends
+  on the interrupt controller parent.
diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt
new file mode 100644
index 0000000..d5b0da8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt
@@ -0,0 +1,71 @@
+NVIDIA Tegra audio complex
+
+Required properties:
+- compatible : "nvidia,tegra-audio-wm8903"
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the WM8903's pins, and the jacks on the board:
+
+  WM8903 pins:
+
+  * IN1L
+  * IN1R
+  * IN2L
+  * IN2R
+  * IN3L
+  * IN3R
+  * DMICDAT
+  * HPOUTL
+  * HPOUTR
+  * LINEOUTL
+  * LINEOUTR
+  * LOP
+  * LON
+  * ROP
+  * RON
+  * MICBIAS
+
+  Board connectors:
+
+  * Headphone Jack
+  * Int Spk
+  * Mic Jack
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
+- nvidia,audio-codec : The phandle of the WM8903 audio codec
+
+Optional properties:
+- nvidia,spkr-en-gpios : The GPIO that enables the speakers
+- nvidia,hp-mute-gpios : The GPIO that mutes the headphones
+- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
+- nvidia,int-mic-en-gpios : The GPIO that enables the internal microphone
+- nvidia,ext-mic-en-gpios : The GPIO that enables the external microphone
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-wm8903-harmony",
+		     "nvidia,tegra-audio-wm8903"
+	nvidia,model = "tegra-wm8903-harmony";
+
+	nvidia,audio-routing =
+		"Headphone Jack", "HPOUTR",
+		"Headphone Jack", "HPOUTL",
+		"Int Spk", "ROP",
+		"Int Spk", "RON",
+		"Int Spk", "LOP",
+		"Int Spk", "LON",
+		"Mic Jack", "MICBIAS",
+		"IN1L", "Mic Jack";
+
+	nvidia,i2s-controller = <&i2s1>;
+	nvidia,audio-codec = <&wm8903>;
+
+	nvidia,spkr-en-gpios = <&codec 2 0>;
+	nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+	nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+};
+
diff --git a/Documentation/devicetree/bindings/sound/tegra20-das.txt b/Documentation/devicetree/bindings/sound/tegra20-das.txt
new file mode 100644
index 0000000..6de3a7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tegra20-das.txt
@@ -0,0 +1,12 @@
+NVIDIA Tegra 20 DAS (Digital Audio Switch) controller
+
+Required properties:
+- compatible : "nvidia,tegra20-das"
+- reg : Should contain DAS registers location and length
+
+Example:
+
+das@70000c00 {
+	compatible = "nvidia,tegra20-das";
+	reg = <0x70000c00 0x80>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/tegra20-i2s.txt
new file mode 100644
index 0000000..0df2b5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tegra20-i2s.txt
@@ -0,0 +1,17 @@
+NVIDIA Tegra 20 I2S controller
+
+Required properties:
+- compatible : "nvidia,tegra20-i2s"
+- reg : Should contain I2S registers location and length
+- interrupts : Should contain I2S interrupt
+- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
+  request selector for this I2S controller
+
+Example:
+
+i2s@70002800 {
+	compatible = "nvidia,tegra20-i2s";
+	reg = <0x70002800 0x200>;
+	interrupts = < 45 >;
+	nvidia,dma-request-selector = < &apbdma 2 >;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt
new file mode 100644
index 0000000..f102cbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8903.txt
@@ -0,0 +1,50 @@
+WM8903 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "wlf,wm8903"
+
+  - reg : the I2C address of the device.
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+
+  - #gpio-cells : Should be two. The first cell is the pin number and the
+    second cell is used to specify optional parameters (currently unused).
+
+Optional properties:
+
+  - interrupts : The interrupt line the codec is connected to.
+
+  - micdet-cfg : Default register value for R6 (Mic Bias). If absent, the
+    default is 0.
+
+  - micdet-delay : The debounce delay for microphone detection in mS. If
+    absent, the default is 100.
+
+  - gpio-cfg : A list of GPIO configuration register values. The list must
+    be 5 entries long. If absent, no configuration of these registers is
+    performed. If any entry has the value 0xffffffff, that GPIO's
+    configuration will not be modified.
+
+Example:
+
+codec: wm8903@1a {
+	compatible = "wlf,wm8903";
+	reg = <0x1a>;
+	interrupts = < 347 >;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	micdet-cfg = <0>;
+	micdet-delay = <100>;
+	gpio-cfg = <
+		0x0600 /* DMIC_LR, output */
+		0x0680 /* DMIC_DAT, input */
+		0x0000 /* GPIO, output, low */
+		0x0200 /* Interrupt, output */
+		0x01a0 /* BCLK, input, active high */
+	>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
new file mode 100644
index 0000000..7a7eb1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -0,0 +1,18 @@
+WM1811/WM8994/WM8958 audio CODEC
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8994@1a {
+	compatible = "wlf,wm8994";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/tegra-usb.txt
new file mode 100644
index 0000000..035d63d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/tegra-usb.txt
@@ -0,0 +1,13 @@
+Tegra SOC USB controllers
+
+The device node for a USB controller that is part of a Tegra
+SOC is as described in the document "Open Firmware Recommended
+Practice : Universal Serial Bus" with the following modifications
+and additions :
+
+Required properties :
+ - compatible : Should be "nvidia,tegra20-ehci" for USB controllers
+   used in host mode.
+ - phy_type : Should be one of "ulpi" or "utmi".
+ - nvidia,vbus-gpio : If present, specifies a gpio that needs to be
+   activated for the bus to be powered.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 874921e..ecc6a6c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -8,7 +8,9 @@
 apm	Applied Micro Circuits Corporation (APM)
 arm	ARM Ltd.
 atmel	Atmel Corporation
+cavium	Cavium, Inc.
 chrp	Common Hardware Reference Platform
+cortina	Cortina Systems, Inc.
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
 denx	Denx Software Engineering
 epson	Seiko Epson Corp.
@@ -32,10 +34,13 @@
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International
 samsung	Samsung Semiconductor
+sbs	Smart Battery System
 schindler	Schindler
 sil	Silicon Image
 simtek
 sirf	SiRF Technology, Inc.
+st	STMicroelectronics
 stericsson	ST-Ericsson
 ti	Texas Instruments
+wlf	Wolfson Microelectronics
 xlnx	Xilinx
diff --git a/Documentation/digsig.txt b/Documentation/digsig.txt
new file mode 100644
index 0000000..3f68288
--- /dev/null
+++ b/Documentation/digsig.txt
@@ -0,0 +1,96 @@
+Digital Signature Verification API
+
+CONTENTS
+
+1. Introduction
+2. API
+3. User-space utilities
+
+
+1. Introduction
+
+Digital signature verification API provides a method to verify digital signature.
+Currently digital signatures are used by the IMA/EVM integrity protection subsystem.
+
+Digital signature verification is implemented using cut-down kernel port of
+GnuPG multi-precision integers (MPI) library. The kernel port provides
+memory allocation errors handling, has been refactored according to kernel
+coding style, and checkpatch.pl reported errors and warnings have been fixed.
+
+Public key and signature consist of header and MPIs.
+
+struct pubkey_hdr {
+	uint8_t		version;	/* key format version */
+	time_t		timestamp;	/* key made, always 0 for now */
+	uint8_t		algo;
+	uint8_t		nmpi;
+	char		mpi[0];
+} __packed;
+
+struct signature_hdr {
+	uint8_t		version;	/* signature format version */
+	time_t		timestamp;	/* signature made */
+	uint8_t		algo;
+	uint8_t		hash;
+	uint8_t		keyid[8];
+	uint8_t		nmpi;
+	char		mpi[0];
+} __packed;
+
+keyid equals to SHA1[12-19] over the total key content.
+Signature header is used as an input to generate a signature.
+Such approach insures that key or signature header could not be changed.
+It protects timestamp from been changed and can be used for rollback
+protection.
+
+2. API
+
+API currently includes only 1 function:
+
+	digsig_verify() - digital signature verification with public key
+
+
+/**
+ * digsig_verify() - digital signature verification with public key
+ * @keyring:	keyring to search key in
+ * @sig:	digital signature
+ * @sigen:	length of the signature
+ * @data:	data
+ * @datalen:	length of the data
+ * @return:	0 on success, -EINVAL otherwise
+ *
+ * Verifies data integrity against digital signature.
+ * Currently only RSA is supported.
+ * Normally hash of the content is used as a data for this function.
+ *
+ */
+int digsig_verify(struct key *keyring, const char *sig, int siglen,
+						const char *data, int datalen);
+
+3. User-space utilities
+
+The signing and key management utilities evm-utils provide functionality
+to generate signatures, to load keys into the kernel keyring.
+Keys can be in PEM or converted to the kernel format.
+When the key is added to the kernel keyring, the keyid defines the name
+of the key: 5D2B05FC633EE3E8 in the example bellow.
+
+Here is example output of the keyctl utility.
+
+$ keyctl show
+Session Keyring
+       -3 --alswrv      0     0  keyring: _ses
+603976250 --alswrv      0    -1   \_ keyring: _uid.0
+817777377 --alswrv      0     0       \_ user: kmk
+891974900 --alswrv      0     0       \_ encrypted: evm-key
+170323636 --alswrv      0     0       \_ keyring: _module
+548221616 --alswrv      0     0       \_ keyring: _ima
+128198054 --alswrv      0     0       \_ keyring: _evm
+
+$ keyctl list 128198054
+1 key in keyring:
+620789745: --alswrv     0     0 user: 5D2B05FC633EE3E8
+
+
+Dmitry Kasatkin
+06.10.2011
diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt
new file mode 100644
index 0000000..225f96d
--- /dev/null
+++ b/Documentation/dma-buf-sharing.txt
@@ -0,0 +1,228 @@
+                    DMA Buffer Sharing API Guide
+                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+                            Sumit Semwal
+                <sumit dot semwal at linaro dot org>
+                 <sumit dot semwal at ti dot com>
+
+This document serves as a guide to device-driver writers on what is the dma-buf
+buffer sharing API, how to use it for exporting and using shared buffers.
+
+Any device driver which wishes to be a part of DMA buffer sharing, can do so as
+either the 'exporter' of buffers, or the 'user' of buffers.
+
+Say a driver A wants to use buffers created by driver B, then we call B as the
+exporter, and A as buffer-user.
+
+The exporter
+- implements and manages operations[1] for the buffer
+- allows other users to share the buffer by using dma_buf sharing APIs,
+- manages the details of buffer allocation,
+- decides about the actual backing storage where this allocation happens,
+- takes care of any migration of scatterlist - for all (shared) users of this
+   buffer,
+
+The buffer-user
+- is one of (many) sharing users of the buffer.
+- doesn't need to worry about how the buffer is allocated, or where.
+- needs a mechanism to get access to the scatterlist that makes up this buffer
+   in memory, mapped into its own address space, so it can access the same area
+   of memory.
+
+*IMPORTANT*: [see https://lkml.org/lkml/2011/12/20/211 for more details]
+For this first version, A buffer shared using the dma_buf sharing API:
+- *may* be exported to user space using "mmap" *ONLY* by exporter, outside of
+   this framework.
+- may be used *ONLY* by importers that do not need CPU access to the buffer.
+
+The dma_buf buffer sharing API usage contains the following steps:
+
+1. Exporter announces that it wishes to export a buffer
+2. Userspace gets the file descriptor associated with the exported buffer, and
+   passes it around to potential buffer-users based on use case
+3. Each buffer-user 'connects' itself to the buffer
+4. When needed, buffer-user requests access to the buffer from exporter
+5. When finished with its use, the buffer-user notifies end-of-DMA to exporter
+6. when buffer-user is done using this buffer completely, it 'disconnects'
+   itself from the buffer.
+
+
+1. Exporter's announcement of buffer export
+
+   The buffer exporter announces its wish to export a buffer. In this, it
+   connects its own private buffer data, provides implementation for operations
+   that can be performed on the exported dma_buf, and flags for the file
+   associated with this buffer.
+
+   Interface:
+      struct dma_buf *dma_buf_export(void *priv, struct dma_buf_ops *ops,
+				     size_t size, int flags)
+
+   If this succeeds, dma_buf_export allocates a dma_buf structure, and returns a
+   pointer to the same. It also associates an anonymous file with this buffer,
+   so it can be exported. On failure to allocate the dma_buf object, it returns
+   NULL.
+
+2. Userspace gets a handle to pass around to potential buffer-users
+
+   Userspace entity requests for a file-descriptor (fd) which is a handle to the
+   anonymous file associated with the buffer. It can then share the fd with other
+   drivers and/or processes.
+
+   Interface:
+      int dma_buf_fd(struct dma_buf *dmabuf)
+
+   This API installs an fd for the anonymous file associated with this buffer;
+   returns either 'fd', or error.
+
+3. Each buffer-user 'connects' itself to the buffer
+
+   Each buffer-user now gets a reference to the buffer, using the fd passed to
+   it.
+
+   Interface:
+      struct dma_buf *dma_buf_get(int fd)
+
+   This API will return a reference to the dma_buf, and increment refcount for
+   it.
+
+   After this, the buffer-user needs to attach its device with the buffer, which
+   helps the exporter to know of device buffer constraints.
+
+   Interface:
+      struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf,
+                                                struct device *dev)
+
+   This API returns reference to an attachment structure, which is then used
+   for scatterlist operations. It will optionally call the 'attach' dma_buf
+   operation, if provided by the exporter.
+
+   The dma-buf sharing framework does the bookkeeping bits related to managing
+   the list of all attachments to a buffer.
+
+Until this stage, the buffer-exporter has the option to choose not to actually
+allocate the backing storage for this buffer, but wait for the first buffer-user
+to request use of buffer for allocation.
+
+
+4. When needed, buffer-user requests access to the buffer
+
+   Whenever a buffer-user wants to use the buffer for any DMA, it asks for
+   access to the buffer using dma_buf_map_attachment API. At least one attach to
+   the buffer must have happened before map_dma_buf can be called.
+
+   Interface:
+      struct sg_table * dma_buf_map_attachment(struct dma_buf_attachment *,
+                                         enum dma_data_direction);
+
+   This is a wrapper to dma_buf->ops->map_dma_buf operation, which hides the
+   "dma_buf->ops->" indirection from the users of this interface.
+
+   In struct dma_buf_ops, map_dma_buf is defined as
+      struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *,
+                                                enum dma_data_direction);
+
+   It is one of the buffer operations that must be implemented by the exporter.
+   It should return the sg_table containing scatterlist for this buffer, mapped
+   into caller's address space.
+
+   If this is being called for the first time, the exporter can now choose to
+   scan through the list of attachments for this buffer, collate the requirements
+   of the attached devices, and choose an appropriate backing storage for the
+   buffer.
+
+   Based on enum dma_data_direction, it might be possible to have multiple users
+   accessing at the same time (for reading, maybe), or any other kind of sharing
+   that the exporter might wish to make available to buffer-users.
+
+   map_dma_buf() operation can return -EINTR if it is interrupted by a signal.
+
+
+5. When finished, the buffer-user notifies end-of-DMA to exporter
+
+   Once the DMA for the current buffer-user is over, it signals 'end-of-DMA' to
+   the exporter using the dma_buf_unmap_attachment API.
+
+   Interface:
+      void dma_buf_unmap_attachment(struct dma_buf_attachment *,
+                                    struct sg_table *);
+
+   This is a wrapper to dma_buf->ops->unmap_dma_buf() operation, which hides the
+   "dma_buf->ops->" indirection from the users of this interface.
+
+   In struct dma_buf_ops, unmap_dma_buf is defined as
+      void (*unmap_dma_buf)(struct dma_buf_attachment *, struct sg_table *);
+
+   unmap_dma_buf signifies the end-of-DMA for the attachment provided. Like
+   map_dma_buf, this API also must be implemented by the exporter.
+
+
+6. when buffer-user is done using this buffer, it 'disconnects' itself from the
+   buffer.
+
+   After the buffer-user has no more interest in using this buffer, it should
+   disconnect itself from the buffer:
+
+   - it first detaches itself from the buffer.
+
+   Interface:
+      void dma_buf_detach(struct dma_buf *dmabuf,
+                          struct dma_buf_attachment *dmabuf_attach);
+
+   This API removes the attachment from the list in dmabuf, and optionally calls
+   dma_buf->ops->detach(), if provided by exporter, for any housekeeping bits.
+
+   - Then, the buffer-user returns the buffer reference to exporter.
+
+   Interface:
+     void dma_buf_put(struct dma_buf *dmabuf);
+
+   This API then reduces the refcount for this buffer.
+
+   If, as a result of this call, the refcount becomes 0, the 'release' file
+   operation related to this fd is called. It calls the dmabuf->ops->release()
+   operation in turn, and frees the memory allocated for dmabuf when exported.
+
+NOTES:
+- Importance of attach-detach and {map,unmap}_dma_buf operation pairs
+   The attach-detach calls allow the exporter to figure out backing-storage
+   constraints for the currently-interested devices. This allows preferential
+   allocation, and/or migration of pages across different types of storage
+   available, if possible.
+
+   Bracketing of DMA access with {map,unmap}_dma_buf operations is essential
+   to allow just-in-time backing of storage, and migration mid-way through a
+   use-case.
+
+- Migration of backing storage if needed
+   If after
+   - at least one map_dma_buf has happened,
+   - and the backing storage has been allocated for this buffer,
+   another new buffer-user intends to attach itself to this buffer, it might
+   be allowed, if possible for the exporter.
+
+   In case it is allowed by the exporter:
+    if the new buffer-user has stricter 'backing-storage constraints', and the
+    exporter can handle these constraints, the exporter can just stall on the
+    map_dma_buf until all outstanding access is completed (as signalled by
+    unmap_dma_buf).
+    Once all users have finished accessing and have unmapped this buffer, the
+    exporter could potentially move the buffer to the stricter backing-storage,
+    and then allow further {map,unmap}_dma_buf operations from any buffer-user
+    from the migrated backing-storage.
+
+   If the exporter cannot fulfil the backing-storage constraints of the new
+   buffer-user device as requested, dma_buf_attach() would return an error to
+   denote non-compatibility of the new buffer-sharing request with the current
+   buffer.
+
+   If the exporter chooses not to allow an attach() operation once a
+   map_dma_buf() API has been called, it simply returns an error.
+
+Miscellaneous notes:
+- Any exporters or users of the dma-buf buffer sharing framework must have
+  a 'select DMA_SHARED_BUFFER' in their respective Kconfigs.
+
+References:
+[1] struct dma_buf_ops in include/linux/dma-buf.h
+[2] All interfaces mentioned above defined in include/linux/dma-buf.h
diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
index 94b7e0f..bbe6cb3 100644
--- a/Documentation/dmaengine.txt
+++ b/Documentation/dmaengine.txt
@@ -75,6 +75,10 @@
    slave_sg	- DMA a list of scatter gather buffers from/to a peripheral
    dma_cyclic	- Perform a cyclic DMA operation from/to a peripheral till the
 		  operation is explicitly stopped.
+   interleaved_dma - This is common to Slave as well as M2M clients. For slave
+		 address of devices' fifo could be already known to the driver.
+		 Various types of operations could be expressed by setting
+		 appropriate values to the 'dma_interleaved_template' members.
 
    A non-NULL return of this transfer API represents a "descriptor" for
    the given transaction.
@@ -89,6 +93,10 @@
 		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		size_t period_len, enum dma_data_direction direction);
 
+	struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
+		struct dma_chan *chan, struct dma_interleaved_template *xt,
+		unsigned long flags);
+
    The peripheral driver is expected to have mapped the scatterlist for
    the DMA operation prior to calling device_prep_slave_sg, and must
    keep the scatterlist mapped until the DMA operation has completed.
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index dfa6fc6..0c083c5 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -66,7 +66,6 @@
 GSYMS
 GTAGS
 Image
-Kerntypes
 Module.markers
 Module.symvers
 PENDING
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index d79aead..41c0c5d 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -233,6 +233,10 @@
   6. List of managed interfaces
   -----------------------------
 
+MEM
+  devm_kzalloc()
+  devm_kfree()
+
 IO region
   devm_request_region()
   devm_request_mem_region()
@@ -262,6 +266,7 @@
   devm_ioremap()
   devm_ioremap_nocache()
   devm_iounmap()
+  devm_request_and_ioremap() : checks resource, requests region, ioremaps
   pcim_iomap()
   pcim_iounmap()
   pcim_iomap_table()	: array of mapped addresses indexed by BAR
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index e67be7a..d1d4a17 100755
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -27,8 +27,8 @@
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
 		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
 		"af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395",
-		"lme2510c_s7395_old", "drxk", "drxk_terratec_h5", "tda10071",
-		"it9135" );
+		"lme2510c_s7395_old", "drxk", "drxk_terratec_h5",
+		"drxk_hauppauge_hvr930c", "tda10071", "it9135", "it9137");
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -644,6 +644,24 @@
     "$fwfile"
 }
 
+sub drxk_hauppauge_hvr930c {
+    my $url = "http://www.wintvcd.co.uk/drivers/";
+    my $zipfile = "HVR-9x0_5_10_325_28153_SIGNED.zip";
+    my $hash = "83ab82e7e9480ec8bf1ae0155ca63c88";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+    my $drvfile = "HVR-900/emOEM.sys";
+    my $fwfile = "dvb-usb-hauppauge-hvr930c-drxk.fw";
+
+    checkstandard();
+
+    wgetfile($zipfile, $url . $zipfile);
+    verify($zipfile, $hash);
+    unzip($zipfile, $tmpdir);
+    extract("$tmpdir/$drvfile", 0x117b0, 42692, "$fwfile");
+
+    "$fwfile"
+}
+
 sub drxk_terratec_h5 {
     my $url = "http://www.linuxtv.org/downloads/firmware/";
     my $hash = "19000dada8e2741162ccc50cc91fa7f1";
@@ -658,6 +676,26 @@
 }
 
 sub it9135 {
+	my $sourcefile = "dvb-usb-it9135.zip";
+	my $url = "http://www.ite.com.tw/uploads/firmware/v3.6.0.0/$sourcefile";
+	my $hash = "1e55f6c8833f1d0ae067c2bb2953e6a9";
+	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);
+	my $outfile = "dvb-usb-it9135.fw";
+	my $fwfile1 = "dvb-usb-it9135-01.fw";
+	my $fwfile2 = "dvb-usb-it9135-02.fw";
+
+	checkstandard();
+
+	wgetfile($sourcefile, $url);
+	unzip($sourcefile, $tmpdir);
+	verify("$tmpdir/$outfile", $hash);
+	extract("$tmpdir/$outfile", 64, 8128, "$fwfile1");
+	extract("$tmpdir/$outfile", 12866, 5817, "$fwfile2");
+
+	"$fwfile1 $fwfile2"
+}
+
+sub it9137 {
     my $url = "http://kworld.server261.com/kworld/CD/ITE_TiVme/V1.00/";
     my $zipfile = "Driver_V10.323.1.0412.100412.zip";
     my $hash = "79b597dc648698ed6820845c0c9d0d37";
diff --git a/Documentation/fb/api.txt b/Documentation/fb/api.txt
new file mode 100644
index 0000000..d4ff7de
--- /dev/null
+++ b/Documentation/fb/api.txt
@@ -0,0 +1,306 @@
+			The Frame Buffer Device API
+			---------------------------
+
+Last revised: June 21, 2011
+
+
+0. Introduction
+---------------
+
+This document describes the frame buffer API used by applications to interact
+with frame buffer devices. In-kernel APIs between device drivers and the frame
+buffer core are not described.
+
+Due to a lack of documentation in the original frame buffer API, drivers
+behaviours differ in subtle (and not so subtle) ways. This document describes
+the recommended API implementation, but applications should be prepared to
+deal with different behaviours.
+
+
+1. Capabilities
+---------------
+
+Device and driver capabilities are reported in the fixed screen information
+capabilities field.
+
+struct fb_fix_screeninfo {
+	...
+	__u16 capabilities;		/* see FB_CAP_*			*/
+	...
+};
+
+Application should use those capabilities to find out what features they can
+expect from the device and driver.
+
+- FB_CAP_FOURCC
+
+The driver supports the four character code (FOURCC) based format setting API.
+When supported, formats are configured using a FOURCC instead of manually
+specifying color components layout.
+
+
+2. Types and visuals
+--------------------
+
+Pixels are stored in memory in hardware-dependent formats. Applications need
+to be aware of the pixel storage format in order to write image data to the
+frame buffer memory in the format expected by the hardware.
+
+Formats are described by frame buffer types and visuals. Some visuals require
+additional information, which are stored in the variable screen information
+bits_per_pixel, grayscale, red, green, blue and transp fields.
+
+Visuals describe how color information is encoded and assembled to create
+macropixels. Types describe how macropixels are stored in memory. The following
+types and visuals are supported.
+
+- FB_TYPE_PACKED_PIXELS
+
+Macropixels are stored contiguously in a single plane. If the number of bits
+per macropixel is not a multiple of 8, whether macropixels are padded to the
+next multiple of 8 bits or packed together into bytes depends on the visual.
+
+Padding at end of lines may be present and is then reported through the fixed
+screen information line_length field.
+
+- FB_TYPE_PLANES
+
+Macropixels are split across multiple planes. The number of planes is equal to
+the number of bits per macropixel, with plane i'th storing i'th bit from all
+macropixels.
+
+Planes are located contiguously in memory.
+
+- FB_TYPE_INTERLEAVED_PLANES
+
+Macropixels are split across multiple planes. The number of planes is equal to
+the number of bits per macropixel, with plane i'th storing i'th bit from all
+macropixels.
+
+Planes are interleaved in memory. The interleave factor, defined as the
+distance in bytes between the beginning of two consecutive interleaved blocks
+belonging to different planes, is stored in the fixed screen information
+type_aux field.
+
+- FB_TYPE_FOURCC
+
+Macropixels are stored in memory as described by the format FOURCC identifier
+stored in the variable screen information grayscale field.
+
+- FB_VISUAL_MONO01
+
+Pixels are black or white and stored on a number of bits (typically one)
+specified by the variable screen information bpp field.
+
+Black pixels are represented by all bits set to 1 and white pixels by all bits
+set to 0. When the number of bits per pixel is smaller than 8, several pixels
+are packed together in a byte.
+
+FB_VISUAL_MONO01 is currently used with FB_TYPE_PACKED_PIXELS only.
+
+- FB_VISUAL_MONO10
+
+Pixels are black or white and stored on a number of bits (typically one)
+specified by the variable screen information bpp field.
+
+Black pixels are represented by all bits set to 0 and white pixels by all bits
+set to 1. When the number of bits per pixel is smaller than 8, several pixels
+are packed together in a byte.
+
+FB_VISUAL_MONO01 is currently used with FB_TYPE_PACKED_PIXELS only.
+
+- FB_VISUAL_TRUECOLOR
+
+Pixels are broken into red, green and blue components, and each component
+indexes a read-only lookup table for the corresponding value. Lookup tables
+are device-dependent, and provide linear or non-linear ramps.
+
+Each component is stored in a macropixel according to the variable screen
+information red, green, blue and transp fields.
+
+- FB_VISUAL_PSEUDOCOLOR and FB_VISUAL_STATIC_PSEUDOCOLOR
+
+Pixel values are encoded as indices into a colormap that stores red, green and
+blue components. The colormap is read-only for FB_VISUAL_STATIC_PSEUDOCOLOR
+and read-write for FB_VISUAL_PSEUDOCOLOR.
+
+Each pixel value is stored in the number of bits reported by the variable
+screen information bits_per_pixel field.
+
+- FB_VISUAL_DIRECTCOLOR
+
+Pixels are broken into red, green and blue components, and each component
+indexes a programmable lookup table for the corresponding value.
+
+Each component is stored in a macropixel according to the variable screen
+information red, green, blue and transp fields.
+
+- FB_VISUAL_FOURCC
+
+Pixels are encoded and  interpreted as described by the format FOURCC
+identifier stored in the variable screen information grayscale field.
+
+
+3. Screen information
+---------------------
+
+Screen information are queried by applications using the FBIOGET_FSCREENINFO
+and FBIOGET_VSCREENINFO ioctls. Those ioctls take a pointer to a
+fb_fix_screeninfo and fb_var_screeninfo structure respectively.
+
+struct fb_fix_screeninfo stores device independent unchangeable information
+about the frame buffer device and the current format. Those information can't
+be directly modified by applications, but can be changed by the driver when an
+application modifies the format.
+
+struct fb_fix_screeninfo {
+	char id[16];			/* identification string eg "TT Builtin" */
+	unsigned long smem_start;	/* Start of frame buffer mem */
+					/* (physical address) */
+	__u32 smem_len;			/* Length of frame buffer mem */
+	__u32 type;			/* see FB_TYPE_*		*/
+	__u32 type_aux;			/* Interleave for interleaved Planes */
+	__u32 visual;			/* see FB_VISUAL_*		*/
+	__u16 xpanstep;			/* zero if no hardware panning  */
+	__u16 ypanstep;			/* zero if no hardware panning  */
+	__u16 ywrapstep;		/* zero if no hardware ywrap    */
+	__u32 line_length;		/* length of a line in bytes    */
+	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
+					/* (physical address) */
+	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
+	__u32 accel;			/* Indicate to driver which	*/
+					/*  specific chip/card we have	*/
+	__u16 capabilities;		/* see FB_CAP_*			*/
+	__u16 reserved[2];		/* Reserved for future compatibility */
+};
+
+struct fb_var_screeninfo stores device independent changeable information
+about a frame buffer device, its current format and video mode, as well as
+other miscellaneous parameters.
+
+struct fb_var_screeninfo {
+	__u32 xres;			/* visible resolution		*/
+	__u32 yres;
+	__u32 xres_virtual;		/* virtual resolution		*/
+	__u32 yres_virtual;
+	__u32 xoffset;			/* offset from virtual to visible */
+	__u32 yoffset;			/* resolution			*/
+
+	__u32 bits_per_pixel;		/* guess what			*/
+	__u32 grayscale;		/* 0 = color, 1 = grayscale,	*/
+					/* >1 = FOURCC			*/
+	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
+	struct fb_bitfield green;	/* else only length is significant */
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;	/* transparency			*/
+
+	__u32 nonstd;			/* != 0 Non standard pixel format */
+
+	__u32 activate;			/* see FB_ACTIVATE_*		*/
+
+	__u32 height;			/* height of picture in mm    */
+	__u32 width;			/* width of picture in mm     */
+
+	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
+
+	/* Timing: All values in pixclocks, except pixclock (of course) */
+	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
+	__u32 left_margin;		/* time from sync to picture	*/
+	__u32 right_margin;		/* time from picture to sync	*/
+	__u32 upper_margin;		/* time from sync to picture	*/
+	__u32 lower_margin;
+	__u32 hsync_len;		/* length of horizontal sync	*/
+	__u32 vsync_len;		/* length of vertical sync	*/
+	__u32 sync;			/* see FB_SYNC_*		*/
+	__u32 vmode;			/* see FB_VMODE_*		*/
+	__u32 rotate;			/* angle we rotate counter clockwise */
+	__u32 colorspace;		/* colorspace for FOURCC-based modes */
+	__u32 reserved[4];		/* Reserved for future compatibility */
+};
+
+To modify variable information, applications call the FBIOPUT_VSCREENINFO
+ioctl with a pointer to a fb_var_screeninfo structure. If the call is
+successful, the driver will update the fixed screen information accordingly.
+
+Instead of filling the complete fb_var_screeninfo structure manually,
+applications should call the FBIOGET_VSCREENINFO ioctl and modify only the
+fields they care about.
+
+
+4. Format configuration
+-----------------------
+
+Frame buffer devices offer two ways to configure the frame buffer format: the
+legacy API and the FOURCC-based API.
+
+
+The legacy API has been the only frame buffer format configuration API for a
+long time and is thus widely used by application. It is the recommended API
+for applications when using RGB and grayscale formats, as well as legacy
+non-standard formats.
+
+To select a format, applications set the fb_var_screeninfo bits_per_pixel field
+to the desired frame buffer depth. Values up to 8 will usually map to
+monochrome, grayscale or pseudocolor visuals, although this is not required.
+
+- For grayscale formats, applications set the grayscale field to one. The red,
+  blue, green and transp fields must be set to 0 by applications and ignored by
+  drivers. Drivers must fill the red, blue and green offsets to 0 and lengths
+  to the bits_per_pixel value.
+
+- For pseudocolor formats, applications set the grayscale field to zero. The
+  red, blue, green and transp fields must be set to 0 by applications and
+  ignored by drivers. Drivers must fill the red, blue and green offsets to 0
+  and lengths to the bits_per_pixel value.
+
+- For truecolor and directcolor formats, applications set the grayscale field
+  to zero, and the red, blue, green and transp fields to describe the layout of
+  color components in memory.
+
+struct fb_bitfield {
+	__u32 offset;			/* beginning of bitfield	*/
+	__u32 length;			/* length of bitfield		*/
+	__u32 msb_right;		/* != 0 : Most significant bit is */
+					/* right */
+};
+
+  Pixel values are bits_per_pixel wide and are split in non-overlapping red,
+  green, blue and alpha (transparency) components. Location and size of each
+  component in the pixel value are described by the fb_bitfield offset and
+  length fields. Offset are computed from the right.
+
+  Pixels are always stored in an integer number of bytes. If the number of
+  bits per pixel is not a multiple of 8, pixel values are padded to the next
+  multiple of 8 bits.
+
+Upon successful format configuration, drivers update the fb_fix_screeninfo
+type, visual and line_length fields depending on the selected format.
+
+
+The FOURCC-based API replaces format descriptions by four character codes
+(FOURCC). FOURCCs are abstract identifiers that uniquely define a format
+without explicitly describing it. This is the only API that supports YUV
+formats. Drivers are also encouraged to implement the FOURCC-based API for RGB
+and grayscale formats.
+
+Drivers that support the FOURCC-based API report this capability by setting
+the FB_CAP_FOURCC bit in the fb_fix_screeninfo capabilities field.
+
+FOURCC definitions are located in the linux/videodev2.h header. However, and
+despite starting with the V4L2_PIX_FMT_prefix, they are not restricted to V4L2
+and don't require usage of the V4L2 subsystem. FOURCC documentation is
+available in Documentation/DocBook/v4l/pixfmt.xml.
+
+To select a format, applications set the grayscale field to the desired FOURCC.
+For YUV formats, they should also select the appropriate colorspace by setting
+the colorspace field to one of the colorspaces listed in linux/videodev2.h and
+documented in Documentation/DocBook/v4l/colorspaces.xml.
+
+The red, green, blue and transp fields are not used with the FOURCC-based API.
+For forward compatibility reasons applications must zero those fields, and
+drivers must ignore them. Values other than 0 may get a meaning in future
+extensions.
+
+Upon successful format configuration, drivers update the fb_fix_screeninfo
+type, visual and line_length fields depending on the selected format. The type
+and visual fields are set to FB_TYPE_FOURCC and FB_VISUAL_FOURCC respectively.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 3d84912..a0ffac0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -85,17 +85,6 @@
 
 ---------------------------
 
-What:	Deprecated snapshot ioctls
-When:	2.6.36
-
-Why:	The ioctls in kernel/power/user.c were marked as deprecated long time
-	ago. Now they notify users about that so that they need to replace
-	their userspace. After some more time, remove them completely.
-
-Who:	Jiri Slaby <jirislaby@gmail.com>
-
----------------------------
-
 What:	The ieee80211_regdom module parameter
 When:	March 2010 / desktop catchup
 
@@ -263,8 +252,7 @@
 
 What:	Code that is now under CONFIG_WIRELESS_EXT_SYSFS
 	(in net/core/net-sysfs.c)
-When:	After the only user (hal) has seen a release with the patches
-	for enough time, probably some time in 2010.
+When:	3.5
 Why:	Over 1K .text/.data size reduction, data is available in other
 	ways (ioctls)
 Who:	Johannes Berg <johannes@sipsolutions.net>
@@ -362,15 +350,6 @@
 
 ----------------------------
 
-What:	KVM paravirt mmu host support
-When:	January 2011
-Why:	The paravirt mmu host support is slower than non-paravirt mmu, both
-	on newer and older hardware.  It is already not exposed to the guest,
-	and kept only for live migration purposes.
-Who:	Avi Kivity <avi@redhat.com>
-
-----------------------------
-
 What:	iwlwifi 50XX module parameters
 When:	3.0
 Why:	The "..50" modules parameters were used to configure 5000 series and
@@ -460,52 +439,6 @@
 
 ----------------------------
 
-What:	Support for driver specific ioctls in the pwc driver (everything
-	defined in media/pwc-ioctl.h)
-When:	3.3
-Why:	This stems from the v4l1 era, with v4l2 everything can be done with
-	standardized v4l2 API calls
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	Driver specific sysfs API in the pwc driver
-When:	3.3
-Why:	Setting pan/tilt should be done with v4l2 controls, like with other
-	cams. The button is available as a standard input device
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	Driver specific use of pixfmt.priv in the pwc driver
-When:	3.3
-Why:	The .priv field never was intended for this, setting a framerate is
-	support using the standardized S_PARM ioctl
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	Software emulation of arbritary resolutions in the pwc driver
-When:	3.3
-Why:	The pwc driver claims to support any resolution between 160x120
-	and 640x480, but emulates this by simply drawing a black border
-	around the image. Userspace can draw its own black border if it
-	really wants one.
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	For VIDIOC_S_FREQUENCY the type field must match the device node's type.
-	If not, return -EINVAL.
-When:	3.2
-Why:	It makes no sense to switch the tuner to radio mode by calling
-	VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by
-	calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a
-	move to more consistent handling of tv and radio tuners.
-Who:	Hans Verkuil <hans.verkuil@cisco.com>
-
-----------------------------
-
 What:	Opening a radio device node will no longer automatically switch the
 	tuner mode from tv to radio.
 When:	3.3
@@ -535,6 +468,20 @@
 	information log when acer-wmi initial.
 Who:    Lee, Chun-Yi <jlee@novell.com>
 
+---------------------------
+
+What:	/sys/devices/platform/_UDC_/udc/_UDC_/is_dualspeed file and
+	is_dualspeed line in /sys/devices/platform/ci13xxx_*/udc/device file.
+When:	3.8
+Why:	The is_dualspeed file is superseded by maximum_speed in the same
+	directory and is_dualspeed line in device file is superseded by
+	max_speed line in the same file.
+
+	The maximum_speed/max_speed specifies maximum speed supported by UDC.
+	To check if dualspeeed is supported, check if the value is >= 3.
+	Various possible speeds are defined in <linux/usb/ch9.h>.
+Who:	Michal Nazarewicz <mina86@mina86.com>
+
 ----------------------------
 
 What:	The XFS nodelaylog mount option
@@ -551,3 +498,29 @@
 Why:	The iwlagn module has been renamed iwlwifi.  The alias will be around
 	for backward compatibility for several cycles and then dropped.
 Who:	Don Fry <donald.h.fry@intel.com>
+
+----------------------------
+
+What:	pci_scan_bus_parented()
+When:	3.5
+Why:	The pci_scan_bus_parented() interface creates a new root bus.  The
+	bus is created with default resources (ioport_resource and
+	iomem_resource) that are always wrong, so we rely on arch code to
+	correct them later.  Callers of pci_scan_bus_parented() should
+	convert to using pci_scan_root_bus() so they can supply a list of
+	bus resources when the bus is created.
+Who:	Bjorn Helgaas <bhelgaas@google.com>
+
+----------------------------
+
+What:	The CAP9 SoC family will be removed
+When:	3.4
+Files:	arch/arm/mach-at91/at91cap9.c
+	arch/arm/mach-at91/at91cap9_devices.c
+	arch/arm/mach-at91/include/mach/at91cap9.h
+	arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+	arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+	arch/arm/mach-at91/board-cap9adk.c
+Why:	The code is not actively maintained and platforms are now hard to find.
+Who:	Nicolas Ferre <nicolas.ferre@atmel.com>
+	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index d819ba1..4fca82e 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -37,15 +37,15 @@
 
 --------------------------- inode_operations --------------------------- 
 prototypes:
-	int (*create) (struct inode *,struct dentry *,int, struct nameidata *);
+	int (*create) (struct inode *,struct dentry *,umode_t, struct nameidata *);
 	struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameid
 ata *);
 	int (*link) (struct dentry *,struct inode *,struct dentry *);
 	int (*unlink) (struct inode *,struct dentry *);
 	int (*symlink) (struct inode *,struct dentry *,const char *);
-	int (*mkdir) (struct inode *,struct dentry *,int);
+	int (*mkdir) (struct inode *,struct dentry *,umode_t);
 	int (*rmdir) (struct inode *,struct dentry *);
-	int (*mknod) (struct inode *,struct dentry *,int,dev_t);
+	int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
 	int (*rename) (struct inode *, struct dentry *,
 			struct inode *, struct dentry *);
 	int (*readlink) (struct dentry *, char __user *,int);
@@ -117,7 +117,7 @@
 	int (*statfs) (struct dentry *, struct kstatfs *);
 	int (*remount_fs) (struct super_block *, int *, char *);
 	void (*umount_begin) (struct super_block *);
-	int (*show_options)(struct seq_file *, struct vfsmount *);
+	int (*show_options)(struct seq_file *, struct dentry *);
 	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
 	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
 	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt
index 763d8eb..d6030aa 100644
--- a/Documentation/filesystems/ceph.txt
+++ b/Documentation/filesystems/ceph.txt
@@ -119,12 +119,20 @@
 	must rely on TCP's error correction to detect data corruption
 	in the data payload.
 
-  noasyncreaddir
-	Disable client's use its local cache to satisfy	readdir
-	requests.  (This does not change correctness; the client uses
-	cached metadata only when a lease or capability ensures it is
-	valid.)
+  dcache
+        Use the dcache contents to perform negative lookups and
+        readdir when the client has the entire directory contents in
+        its cache.  (This does not change correctness; the client uses
+        cached metadata only when a lease or capability ensures it is
+        valid.)
 
+  nodcache
+        Do not use the dcache as above.  This avoids a significant amount of
+        complex code, sacrificing performance without affecting correctness,
+        and is useful for tracking down bugs.
+
+  noasyncreaddir
+	Do not use the dcache as above for readdir.
 
 More Information
 ================
diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index dd57bb6..b40fec9 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -192,7 +192,7 @@
 	struct configfs_attribute {
 		char                    *ca_name;
 		struct module           *ca_owner;
-		mode_t                  ca_mode;
+		umode_t                  ca_mode;
 	};
 
 When a config_item wants an attribute to appear as a file in the item's
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt
index 742cc06..6872c91 100644
--- a/Documentation/filesystems/debugfs.txt
+++ b/Documentation/filesystems/debugfs.txt
@@ -35,7 +35,7 @@
 
 The most general way to create a file within a debugfs directory is with:
 
-    struct dentry *debugfs_create_file(const char *name, mode_t mode,
+    struct dentry *debugfs_create_file(const char *name, umode_t mode,
 				       struct dentry *parent, void *data,
 				       const struct file_operations *fops);
 
@@ -53,13 +53,13 @@
 for simple situations.  Files containing a single integer value can be
 created with any of:
 
-    struct dentry *debugfs_create_u8(const char *name, mode_t mode,
+    struct dentry *debugfs_create_u8(const char *name, umode_t mode,
 				     struct dentry *parent, u8 *value);
-    struct dentry *debugfs_create_u16(const char *name, mode_t mode,
+    struct dentry *debugfs_create_u16(const char *name, umode_t mode,
 				      struct dentry *parent, u16 *value);
-    struct dentry *debugfs_create_u32(const char *name, mode_t mode,
+    struct dentry *debugfs_create_u32(const char *name, umode_t mode,
 				      struct dentry *parent, u32 *value);
-    struct dentry *debugfs_create_u64(const char *name, mode_t mode,
+    struct dentry *debugfs_create_u64(const char *name, umode_t mode,
 				      struct dentry *parent, u64 *value);
 
 These files support both reading and writing the given value; if a specific
@@ -67,13 +67,13 @@
 values in these files are in decimal; if hexadecimal is more appropriate,
 the following functions can be used instead:
 
-    struct dentry *debugfs_create_x8(const char *name, mode_t mode,
+    struct dentry *debugfs_create_x8(const char *name, umode_t mode,
 				     struct dentry *parent, u8 *value);
-    struct dentry *debugfs_create_x16(const char *name, mode_t mode,
+    struct dentry *debugfs_create_x16(const char *name, umode_t mode,
 				      struct dentry *parent, u16 *value);
-    struct dentry *debugfs_create_x32(const char *name, mode_t mode,
+    struct dentry *debugfs_create_x32(const char *name, umode_t mode,
 				      struct dentry *parent, u32 *value);
-    struct dentry *debugfs_create_x64(const char *name, mode_t mode,
+    struct dentry *debugfs_create_x64(const char *name, umode_t mode,
 				      struct dentry *parent, u64 *value);
 
 These functions are useful as long as the developer knows the size of the
@@ -81,7 +81,7 @@
 architectures, though, complicating the situation somewhat.  There is a
 function meant to help out in one special case:
 
-    struct dentry *debugfs_create_size_t(const char *name, mode_t mode,
+    struct dentry *debugfs_create_size_t(const char *name, umode_t mode,
 				         struct dentry *parent, 
 					 size_t *value);
 
@@ -90,21 +90,22 @@
 
 Boolean values can be placed in debugfs with:
 
-    struct dentry *debugfs_create_bool(const char *name, mode_t mode,
+    struct dentry *debugfs_create_bool(const char *name, umode_t mode,
 				       struct dentry *parent, u32 *value);
 
 A read on the resulting file will yield either Y (for non-zero values) or
 N, followed by a newline.  If written to, it will accept either upper- or
 lower-case values, or 1 or 0.  Any other input will be silently ignored.
 
-Finally, a block of arbitrary binary data can be exported with:
+Another option is exporting a block of arbitrary binary data, with
+this structure and function:
 
     struct debugfs_blob_wrapper {
 	void *data;
 	unsigned long size;
     };
 
-    struct dentry *debugfs_create_blob(const char *name, mode_t mode,
+    struct dentry *debugfs_create_blob(const char *name, umode_t mode,
 				       struct dentry *parent,
 				       struct debugfs_blob_wrapper *blob);
 
@@ -115,6 +116,35 @@
 any code which does so in the mainline.  Note that all files created with
 debugfs_create_blob() are read-only.
 
+If you want to dump a block of registers (something that happens quite
+often during development, even if little such code reaches mainline.
+Debugfs offers two functions: one to make a registers-only file, and
+another to insert a register block in the middle of another sequential
+file.
+
+    struct debugfs_reg32 {
+	char *name;
+	unsigned long offset;
+    };
+
+    struct debugfs_regset32 {
+	struct debugfs_reg32 *regs;
+	int nregs;
+	void __iomem *base;
+    };
+
+    struct dentry *debugfs_create_regset32(const char *name, mode_t mode,
+				     struct dentry *parent,
+				     struct debugfs_regset32 *regset);
+
+    int debugfs_print_regs32(struct seq_file *s, struct debugfs_reg32 *regs,
+			 int nregs, void __iomem *base, char *prefix);
+
+The "base" argument may be 0, but you may want to build the reg32 array
+using __stringify, and a number of register names (macros) are actually
+byte offsets over a base for the register block.
+
+
 There are a couple of other directory-oriented helper functions:
 
     struct dentry *debugfs_rename(struct dentry *old_dir, 
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 4917cf2..10ec463 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -581,6 +581,13 @@
 			      behaviour may change in the future as it is
 			      not necessary and has been done this way only
 			      for sake of simplicity.
+
+ EXT4_IOC_RESIZE_FS	      Resize the filesystem to a new size.  The number
+			      of blocks of resized filesystem is passed in via
+			      64 bit integer argument.  The kernel allocates
+			      bitmaps and inode table, the userspace tool thus
+			      just passes the new number of blocks.
+
 ..............................................................................
 
 References
diff --git a/Documentation/filesystems/nfs/00-INDEX b/Documentation/filesystems/nfs/00-INDEX
index a57e124..1716874a 100644
--- a/Documentation/filesystems/nfs/00-INDEX
+++ b/Documentation/filesystems/nfs/00-INDEX
@@ -2,6 +2,8 @@
 	- this file (nfs-related documentation).
 Exporting
 	- explanation of how to make filesystems exportable.
+fault_injection.txt
+	- information for using fault injection on the server
 knfsd-stats.txt
 	- statistics which the NFS server makes available to user space.
 nfs.txt
diff --git a/Documentation/filesystems/nfs/fault_injection.txt b/Documentation/filesystems/nfs/fault_injection.txt
new file mode 100644
index 0000000..426d166
--- /dev/null
+++ b/Documentation/filesystems/nfs/fault_injection.txt
@@ -0,0 +1,69 @@
+
+Fault Injection
+===============
+Fault injection is a method for forcing errors that may not normally occur, or
+may be difficult to reproduce.  Forcing these errors in a controlled environment
+can help the developer find and fix bugs before their code is shipped in a
+production system.  Injecting an error on the Linux NFS server will allow us to
+observe how the client reacts and if it manages to recover its state correctly.
+
+NFSD_FAULT_INJECTION must be selected when configuring the kernel to use this
+feature.
+
+
+Using Fault Injection
+=====================
+On the client, mount the fault injection server through NFS v4.0+ and do some
+work over NFS (open files, take locks, ...).
+
+On the server, mount the debugfs filesystem to <debug_dir> and ls
+<debug_dir>/nfsd.  This will show a list of files that will be used for
+injecting faults on the NFS server.  As root, write a number n to the file
+corresponding to the action you want the server to take.  The server will then
+process the first n items it finds.  So if you want to forget 5 locks, echo '5'
+to <debug_dir>/nfsd/forget_locks.  A value of 0 will tell the server to forget
+all corresponding items.  A log message will be created containing the number
+of items forgotten (check dmesg).
+
+Go back to work on the client and check if the client recovered from the error
+correctly.
+
+
+Available Faults
+================
+forget_clients:
+     The NFS server keeps a list of clients that have placed a mount call.  If
+     this list is cleared, the server will have no knowledge of who the client
+     is, forcing the client to reauthenticate with the server.
+
+forget_openowners:
+     The NFS server keeps a list of what files are currently opened and who
+     they were opened by.  Clearing this list will force the client to reopen
+     its files.
+
+forget_locks:
+     The NFS server keeps a list of what files are currently locked in the VFS.
+     Clearing this list will force the client to reclaim its locks (files are
+     unlocked through the VFS as they are cleared from this list).
+
+forget_delegations:
+     A delegation is used to assure the client that a file, or part of a file,
+     has not changed since the delegation was awarded.  Clearing this list will
+     force the client to reaquire its delegation before accessing the file
+     again.
+
+recall_delegations:
+     Delegations can be recalled by the server when another client attempts to
+     access a file.  This test will notify the client that its delegation has
+     been revoked, forcing the client to reaquire the delegation before using
+     the file again.
+
+
+tools/nfs/inject_faults.sh script
+=================================
+This script has been created to ease the fault injection process.  This script
+will detect the mounted debugfs directory and write to the files located there
+based on the arguments passed by the user.  For example, running
+`inject_faults.sh forget_locks 1` as root will instruct the server to forget
+one lock.  Running `inject_faults forget_locks` will instruct the server to
+forgetall locks.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 0ec91f0..a76a26a 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -41,6 +41,8 @@
   3.5	/proc/<pid>/mountinfo - Information about mounts
   3.6	/proc/<pid>/comm  & /proc/<pid>/task/<tid>/comm
 
+  4	Configuring procfs
+  4.1	Mount options
 
 ------------------------------------------------------------------------------
 Preface
@@ -305,6 +307,9 @@
   blkio_ticks   time spent waiting for block IO
   gtime         guest time of the task in jiffies
   cgtime        guest time of the task children in jiffies
+  start_data    address above which program data+bss is placed
+  end_data      address below which program data+bss is placed
+  start_brk     address above which program heap can be expanded with brk()
 ..............................................................................
 
 The /proc/PID/maps file containing the currently mapped memory regions and
@@ -1542,3 +1547,40 @@
 is limited in size compared to the cmdline value, so writing anything longer
 then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
 comm value.
+
+
+------------------------------------------------------------------------------
+Configuring procfs
+------------------------------------------------------------------------------
+
+4.1	Mount options
+---------------------
+
+The following mount options are supported:
+
+	hidepid=	Set /proc/<pid>/ access mode.
+	gid=		Set the group authorized to learn processes information.
+
+hidepid=0 means classic mode - everybody may access all /proc/<pid>/ directories
+(default).
+
+hidepid=1 means users may not access any /proc/<pid>/ directories but their
+own.  Sensitive files like cmdline, sched*, status are now protected against
+other users.  This makes it impossible to learn whether any user runs
+specific program (given the program doesn't reveal itself by its behaviour).
+As an additional bonus, as /proc/<pid>/cmdline is unaccessible for other users,
+poorly written programs passing sensitive information via program arguments are
+now protected against local eavesdroppers.
+
+hidepid=2 means hidepid=1 plus all /proc/<pid>/ will be fully invisible to other
+users.  It doesn't mean that it hides a fact whether a process with a specific
+pid value exists (it can be learned by other means, e.g. by "kill -0 $PID"),
+but it hides process' uid and gid, which may be learned by stat()'ing
+/proc/<pid>/ otherwise.  It greatly complicates an intruder's task of gathering
+information about running processes, whether some daemon runs with elevated
+privileges, whether other user runs some sensitive program, whether other users
+run any program at all, etc.
+
+gid= defines a group authorized to learn processes information otherwise
+prohibited by hidepid=.  If you use some daemon like identd which needs to learn
+information about processes information, just add identd to this group.
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index 7db3ebd..403c090 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -93,8 +93,8 @@
 
 Compressed data blocks are written to the filesystem as files are read from
 the source directory, and checked for duplicates.  Once all file data has been
-written the completed inode, directory, fragment, export and uid/gid lookup
-tables are written.
+written the completed inode, directory, fragment, export, uid/gid lookup and
+xattr tables are written.
 
 3.1 Compression options
 -----------------------
@@ -151,7 +151,7 @@
 and at lookup the index is scanned linearly looking for the first filename
 alphabetically larger than the filename being looked up.  At this point the
 location of the metadata block the filename is in has been found.
-The general idea of the index is ensure only one metadata block needs to be
+The general idea of the index is to ensure only one metadata block needs to be
 decompressed to do a lookup irrespective of the length of the directory.
 This scheme has the advantage that it doesn't require extra memory overhead
 and doesn't require much extra storage on disk.
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 07235ca..a6619b7 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -70,7 +70,7 @@
 struct attribute {
         char                    * name;
         struct module		*owner;
-        mode_t                  mode;
+        umode_t                 mode;
 };
 
 
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 43cbd08..3d9393b 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -225,7 +225,7 @@
         void (*clear_inode) (struct inode *);
         void (*umount_begin) (struct super_block *);
 
-        int (*show_options)(struct seq_file *, struct vfsmount *);
+        int (*show_options)(struct seq_file *, struct dentry *);
 
         ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
         ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
@@ -341,14 +341,14 @@
 filesystem. As of kernel 2.6.22, the following members are defined:
 
 struct inode_operations {
-	int (*create) (struct inode *,struct dentry *,int, struct nameidata *);
+	int (*create) (struct inode *,struct dentry *, umode_t, struct nameidata *);
 	struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *);
 	int (*link) (struct dentry *,struct inode *,struct dentry *);
 	int (*unlink) (struct inode *,struct dentry *);
 	int (*symlink) (struct inode *,struct dentry *,const char *);
-	int (*mkdir) (struct inode *,struct dentry *,int);
+	int (*mkdir) (struct inode *,struct dentry *,umode_t);
 	int (*rmdir) (struct inode *,struct dentry *);
-	int (*mknod) (struct inode *,struct dentry *,int,dev_t);
+	int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
 	int (*rename) (struct inode *, struct dentry *,
 			struct inode *, struct dentry *);
 	int (*readlink) (struct dentry *, char __user *,int);
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 6f496a5..23b7def 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -26,6 +26,10 @@
     Prefix: 'it8721'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8728F
+    Prefix: 'it8728'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * SiS950   [clone of IT8705F]
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -71,7 +75,7 @@
 -----------
 
 This driver implements support for the IT8705F, IT8712F, IT8716F,
-IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips.
+IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -105,6 +109,9 @@
 for AMD power sequencing. Therefore the chip will appear as IT8716F
 to userspace applications.
 
+The IT8728F is considered compatible with the IT8721F, until a datasheet
+becomes available (hopefully.)
+
 Temperatures are measured in degrees Celsius. An alarm is triggered once
 when the Overtemperature Shutdown limit is crossed.
 
@@ -121,8 +128,8 @@
 maximum limit. Note that minimum in this case always means 'closest to
 zero'; this is important for negative voltage measurements. All voltage
 inputs can measure voltages between 0 and 4.08 volts, with a resolution of
-0.016 volt (except IT8721F/IT8758E: 0.012 volt.) The battery voltage in8 does
-not have limit registers.
+0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery
+voltage in8 does not have limit registers.
 
 On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside
 the chip (in7, in8 and optionally in3). The driver handles this transparently
diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63
index b9843ea..4d30d20 100644
--- a/Documentation/hwmon/lm63
+++ b/Documentation/hwmon/lm63
@@ -12,6 +12,11 @@
     Addresses scanned: I2C 0x18 and 0x4e
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/pf/LM/LM64.html
+  * National Semiconductor LM96163
+    Prefix: 'lm96163'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LM/LM96163.html
 
 Author: Jean Delvare <khali@linux-fr.org>
 
@@ -49,16 +54,24 @@
 Note that the pin used for fan monitoring is shared with an alert out
 function. Depending on how the board designer wanted to use the chip, fan
 speed monitoring will or will not be possible. The proper chip configuration
-is left to the BIOS, and the driver will blindly trust it.
+is left to the BIOS, and the driver will blindly trust it. Only the original
+LM63 suffers from this limitation, the LM64 and LM96163 have separate pins
+for fan monitoring and alert out. On the LM64, monitoring is always enabled;
+on the LM96163 it can be disabled.
 
 A PWM output can be used to control the speed of the fan. The LM63 has two
 PWM modes: manual and automatic. Automatic mode is not fully implemented yet
 (you cannot define your custom PWM/temperature curve), and mode change isn't
 supported either.
 
-The lm63 driver will not update its values more frequently than every
-second; reading them more often will do no harm, but will return 'old'
-values.
+The lm63 driver will not update its values more frequently than configured with
+the update_interval sysfs attribute; reading them more often will do no harm,
+but will return 'old' values. Values in the automatic fan control lookup table
+(attributes pwm1_auto_*) have their own independent lifetime of 5 seconds.
 
 The LM64 is effectively an LM63 with GPIO lines. The driver does not
 support these GPIO lines at present.
+
+The LM96163 is an enhanced version of LM63 with improved temperature accuracy
+and better PWM resolution. For LM96163, the external temperature sensor type is
+configurable as CPU embedded diode(1) or 3904 transistor(2).
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index 15ac911..d28b591 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -2,9 +2,8 @@
 ====================
 
 Supported chips:
-  * Ericsson BMR45X series
-    DC/DC Converter
-    Prefixes: 'bmr450', 'bmr451', 'bmr453', 'bmr454'
+  * Ericsson BMR453, BMR454
+    Prefixes: 'bmr453', 'bmr454'
     Addresses scanned: -
     Datasheet:
  http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index a4aa8f6..1f4dd85 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -304,7 +304,7 @@
 temp[1-*]_type	Sensor type selection.
 		Integers 1 to 6
 		RW
-		1: PII/Celeron Diode
+		1: CPU embedded diode
 		2: 3904 transistor
 		3: thermal diode
 		4: thermistor
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 7617798..51f76a1 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -6,6 +6,10 @@
     Prefix: 'zl2004'
     Addresses scanned: -
     Datasheet: http://www.intersil.com/data/fn/fn6847.pdf
+  * Intersil / Zilker Labs ZL2005
+    Prefix: 'zl2005'
+    Addresses scanned: -
+    Datasheet: http://www.intersil.com/data/fn/fn6848.pdf
   * Intersil / Zilker Labs ZL2006
     Prefix: 'zl2006'
     Addresses scanned: -
@@ -30,6 +34,17 @@
     Prefix: 'zl6105'
     Addresses scanned: -
     Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
+  * Ericsson BMR450, BMR451
+    Prefix: 'bmr450', 'bmr451'
+    Addresses scanned: -
+    Datasheet:
+http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401
+  * Ericsson BMR462, BMR463, BMR464
+    Prefixes: 'bmr462', 'bmr463', 'bmr464'
+    Addresses scanned: -
+    Datasheet:
+http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256
+
 
 Author: Guenter Roeck <guenter.roeck@ericsson.com>
 
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
new file mode 100644
index 0000000..f274c28
--- /dev/null
+++ b/Documentation/input/alps.txt
@@ -0,0 +1,188 @@
+ALPS Touchpad Protocol
+----------------------
+
+Introduction
+------------
+
+Currently the ALPS touchpad driver supports four protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
+protocol versions is contained in the following sections.
+
+Detection
+---------
+
+All ALPS touchpads should respond to the "E6 report" command sequence:
+E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
+00-00-64.
+
+If the E6 report is successful, the touchpad model is identified using the "E7
+report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
+matched against known models in the alps_model_data_array.
+
+With protocol versions 3 and 4, the E7 report model signature is always
+73-02-64. To differentiate between these versions, the response from the
+"Enter Command Mode" sequence must be inspected as described below.
+
+Command Mode
+------------
+
+Protocol versions 3 and 4 have a command mode that is used to read and write
+one-byte device registers in a 16-bit address space. The command sequence
+EC-EC-EC-E9 places the device in command mode, and the device will respond
+with 88-07 followed by a third byte. This third byte can be used to determine
+whether the devices uses the version 3 or 4 protocol.
+
+To exit command mode, PSMOUSE_CMD_SETSTREAM (EA) is sent to the touchpad.
+
+While in command mode, register addresses can be set by first sending a
+specific command, either EC for v3 devices or F5 for v4 devices. Then the
+address is sent one nibble at a time, where each nibble is encoded as a
+command with optional data. This enoding differs slightly between the v3 and
+v4 protocols.
+
+Once an address has been set, the addressed register can be read by sending
+PSMOUSE_CMD_GETINFO (E9). The first two bytes of the response contains the
+address of the register being read, and the third contains the value of the
+register. Registers are written by writing the value one nibble at a time
+using the same encoding used for addresses.
+
+Packet Format
+-------------
+
+In the following tables, the following notation is used.
+
+ CAPITALS = stick, miniscules = touchpad
+
+?'s can have different meanings on different models, such as wheel rotation,
+extra buttons, stick buttons on a dualpoint, etc.
+
+PS/2 packet format
+------------------
+
+ byte 0:  0    0 YSGN XSGN    1    M    R    L
+ byte 1: X7   X6   X5   X4   X3   X2   X1   X0
+ byte 2: Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+
+Note that the device never signals overflow condition.
+
+ALPS Absolute Mode - Protocol Verion 1
+--------------------------------------
+
+ byte 0:  1    0    0    0    1   x9   x8   x7
+ byte 1:  0   x6   x5   x4   x3   x2   x1   x0
+ byte 2:  0    ?    ?    l    r    ?  fin  ges
+ byte 3:  0    ?    ?    ?    ?   y9   y8   y7
+ byte 4:  0   y6   y5   y4   y3   y2   y1   y0
+ byte 5:  0   z6   z5   z4   z3   z2   z1   z0
+
+ALPS Absolute Mode - Protocol Version 2
+---------------------------------------
+
+ byte 0:  1    ?    ?    ?    1    ?    ?    ?
+ byte 1:  0   x6   x5   x4   x3   x2   x1   x0
+ byte 2:  0  x10   x9   x8   x7    ?  fin  ges
+ byte 3:  0   y9   y8   y7    1    M    R    L
+ byte 4:  0   y6   y5   y4   y3   y2   y1   y0
+ byte 5:  0   z6   z5   z4   z3   z2   z1   z0
+
+Dualpoint device -- interleaved packet format
+---------------------------------------------
+
+ byte 0:    1    1    0    0    1    1    1    1
+ byte 1:    0   x6   x5   x4   x3   x2   x1   x0
+ byte 2:    0  x10   x9   x8   x7    0  fin  ges
+ byte 3:    0    0 YSGN XSGN    1    1    1    1
+ byte 4:   X7   X6   X5   X4   X3   X2   X1   X0
+ byte 5:   Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+ byte 6:    0   y9   y8   y7    1    m    r    l
+ byte 7:    0   y6   y5   y4   y3   y2   y1   y0
+ byte 8:    0   z6   z5   z4   z3   z2   z1   z0
+
+ALPS Absolute Mode - Protocol Version 3
+---------------------------------------
+
+ALPS protocol version 3 has three different packet formats. The first two are
+associated with touchpad events, and the third is associatd with trackstick
+events.
+
+The first type is the touchpad position packet.
+
+ byte 0:    1    ?   x1   x0    1    1    1    1
+ byte 1:    0  x10   x9   x8   x7   x6   x5   x4
+ byte 2:    0  y10   y9   y8   y7   y6   y5   y4
+ byte 3:    0    M    R    L    1    m    r    l
+ byte 4:    0   mt   x3   x2   y3   y2   y1   y0
+ byte 5:    0   z6   z5   z4   z3   z2   z1   z0
+
+Note that for some devices the trackstick buttons are reported in this packet,
+and on others it is reported in the trackstick packets.
+
+The second packet type contains bitmaps representing the x and y axes. In the
+bitmaps a given bit is set if there is a finger covering that position on the
+given axis. Thus the bitmap packet can be used for low-resolution multi-touch
+data, although finger tracking is not possible.  This packet also encodes the
+number of contacts (f1 and f0 in the table below).
+
+ byte 0:    1    1   x1   x0    1    1    1    1
+ byte 1:    0   x8   x7   x6   x5   x4   x3   x2
+ byte 2:    0   y7   y6   y5   y4   y3   y2   y1
+ byte 3:    0  y10   y9   y8    1    1    1    1
+ byte 4:    0  x14  x13  x12  x11  x10   x9   y0
+ byte 5:    0    1    ?    ?    ?    ?   f1   f0
+
+This packet only appears after a position packet with the mt bit set, and
+ususally only appears when there are two or more contacts (although
+ocassionally it's seen with only a single contact).
+
+The final v3 packet type is the trackstick packet.
+
+ byte 0:    1    1   x7   y7    1    1    1    1
+ byte 1:    0   x6   x5   x4   x3   x2   x1   x0
+ byte 2:    0   y6   y5   y4   y3   y2   y1   y0
+ byte 3:    0    1    0    0    1    0    0    0
+ byte 4:    0   z4   z3   z2   z1   z0    ?    ?
+ byte 5:    0    0    1    1    1    1    1    1
+
+ALPS Absolute Mode - Protocol Version 4
+---------------------------------------
+
+Protocol version 4 has an 8-byte packet format.
+
+ byte 0:    1    ?   x1   x0    1    1    1    1
+ byte 1:    0  x10   x9   x8   x7   x6   x5   x4
+ byte 2:    0  y10   y9   y8   y7   y6   y5   y4
+ byte 3:    0    1   x3   x2   y3   y2   y1   y0
+ byte 4:    0    ?    ?    ?    1    ?    r    l
+ byte 5:    0   z6   z5   z4   z3   z2   z1   z0
+ byte 6:    bitmap data (described below)
+ byte 7:    bitmap data (described below)
+
+The last two bytes represent a partial bitmap packet, with 3 full packets
+required to construct a complete bitmap packet.  Once assembled, the 6-byte
+bitmap packet has the following format:
+
+ byte 0:    0    1   x7   x6   x5   x4   x3   x2
+ byte 1:    0   x1   x0   y4   y3   y2   y1   y0
+ byte 2:    0    0    ?  x14  x13  x12  x11  x10
+ byte 3:    0   x9   x8   y9   y8   y7   y6   y5
+ byte 4:    0    0    0    0    0    0    0    0
+ byte 5:    0    0    0    0    0    0    0  y10
+
+There are several things worth noting here.
+
+ 1) In the bitmap data, bit 6 of byte 0 serves as a sync byte to
+    identify the first fragment of a bitmap packet.
+
+ 2) The bitmaps represent the same data as in the v3 bitmap packets, although
+    the packet layout is different.
+
+ 3) There doesn't seem to be a count of the contact points anywhere in the v4
+    protocol packets. Deriving a count of contact points must be done by
+    analyzing the bitmaps.
+
+ 4) There is a 3 to 1 ratio of position packets to bitmap packets. Therefore
+    MT position can only be updated for every third ST position update, and
+    the count of contact points can only be updated every third packet as
+    well.
+
+So far no v4 devices with tracksticks have been encountered.
diff --git a/Documentation/input/gpio-tilt.txt b/Documentation/input/gpio-tilt.txt
new file mode 100644
index 0000000..06d60c3
--- /dev/null
+++ b/Documentation/input/gpio-tilt.txt
@@ -0,0 +1,103 @@
+Driver for tilt-switches connected via GPIOs
+============================================
+
+Generic driver to read data from tilt switches connected via gpios.
+Orientation can be provided by one or more than one tilt switches,
+i.e. each tilt switch providing one axis, and the number of axes
+is also not limited.
+
+
+Data structures:
+----------------
+
+The array of struct gpio in the gpios field is used to list the gpios
+that represent the current tilt state.
+
+The array of struct gpio_tilt_axis describes the axes that are reported
+to the input system. The values set therein are used for the
+input_set_abs_params calls needed to init the axes.
+
+The array of struct gpio_tilt_state maps gpio states to the corresponding
+values to report. The gpio state is represented as a bitfield where the
+bit-index corresponds to the index of the gpio in the struct gpio array.
+In the same manner the values stored in the axes array correspond to
+the elements of the gpio_tilt_axis-array.
+
+
+Example:
+--------
+
+Example configuration for a single TS1003 tilt switch that rotates around
+one axis in 4 steps and emitts the current tilt via two GPIOs.
+
+static int sg060_tilt_enable(struct device *dev) {
+	/* code to enable the sensors */
+};
+
+static void sg060_tilt_disable(struct device *dev) {
+	/* code to disable the sensors */
+};
+
+static struct gpio sg060_tilt_gpios[] = {
+	{ SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" },
+	{ SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" },
+};
+
+static struct gpio_tilt_state sg060_tilt_states[] = {
+	{
+		.gpios = (0 << 1) | (0 << 0),
+		.axes = (int[]) {
+			0,
+		},
+	}, {
+		.gpios = (0 << 1) | (1 << 0),
+		.axes = (int[]) {
+			1, /* 90 degrees */
+		},
+	}, {
+		.gpios = (1 << 1) | (1 << 0),
+		.axes = (int[]) {
+			2, /* 180 degrees */
+		},
+	}, {
+		.gpios = (1 << 1) | (0 << 0),
+		.axes = (int[]) {
+			3, /* 270 degrees */
+		},
+	},
+};
+
+static struct gpio_tilt_axis sg060_tilt_axes[] = {
+	{
+		.axis = ABS_RY,
+		.min = 0,
+		.max = 3,
+		.fuzz = 0,
+		.flat = 0,
+	},
+};
+
+static struct gpio_tilt_platform_data sg060_tilt_pdata= {
+	.gpios = sg060_tilt_gpios,
+	.nr_gpios = ARRAY_SIZE(sg060_tilt_gpios),
+
+	.axes = sg060_tilt_axes,
+	.nr_axes = ARRAY_SIZE(sg060_tilt_axes),
+
+	.states = sg060_tilt_states,
+	.nr_states = ARRAY_SIZE(sg060_tilt_states),
+
+	.debounce_interval = 100,
+
+	.poll_interval = 1000,
+	.enable = sg060_tilt_enable,
+	.disable = sg060_tilt_disable,
+};
+
+static struct platform_device sg060_device_tilt = {
+	.name = "gpio-tilt-polled",
+	.id = -1,
+	.dev = {
+		.platform_data = &sg060_tilt_pdata,
+	},
+};
diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt
index b2ef125..89251e2 100644
--- a/Documentation/input/sentelic.txt
+++ b/Documentation/input/sentelic.txt
@@ -1,5 +1,5 @@
-Copyright (C) 2002-2010 Sentelic Corporation.
-Last update: Jan-13-2010
+Copyright (C) 2002-2011 Sentelic Corporation.
+Last update: Dec-07-2011
 
 ==============================================================================
 * Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
@@ -140,6 +140,7 @@
 Byte 1: Bit7~Bit6 => 00, Normal data packet
                   => 01, Absolute coordination packet
                   => 10, Notify packet
+                  => 11, Normal data packet with on-pad click
         Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
                 When both fingers are up, the last two reports have zero valid
                 bit.
@@ -164,6 +165,7 @@
 Byte 1: Bit7~Bit6 => 00, Normal data packet
                   => 01, Absolute coordinates packet
                   => 10, Notify packet
+                  => 11, Normal data packet with on-pad click
         Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
                 When both fingers are up, the last two reports have zero valid
                 bit.
@@ -188,6 +190,7 @@
 Byte 1: Bit7~Bit6 => 00, Normal data packet
                   => 01, Absolute coordinates packet
                   => 10, Notify packet
+                  => 11, Normal data packet with on-pad click
         Bit5 => 1
         Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
                 0: left button is generated by the on-pad command
@@ -205,7 +208,7 @@
         Bit6 => scroll left button
         Bit5 => scroll down button
         Bit4 => scroll up button
-            * Note that if gesture and additional buttoni (Bit4~Bit7)
+            * Note that if gesture and additional button (Bit4~Bit7)
               happen at the same time, the button information will not
               be sent.
         Bit3~Bit0 => Reserved
@@ -227,6 +230,7 @@
 Byte 1: Bit7~Bit6 => 00, Normal data packet
                   => 01, Absolute coordinates packet
                   => 10, Notify packet
+                  => 11, Normal data packet with on-pad click
         Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
                 When both fingers are up, the last two reports have zero valid
                 bit.
@@ -253,6 +257,7 @@
 Byte 1: Bit7~Bit6 => 00, Normal data packet
                   => 01, Absolute coordination packet
                   => 10, Notify packet
+                  => 11, Normal data packet with on-pad click
         Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
                 When both fingers are up, the last two reports have zero valid
                 bit.
@@ -279,8 +284,9 @@
 Byte 1: Bit7~Bit6 => 00, Normal data packet
                   => 01, Absolute coordination packet
                   => 10, Notify packet
+                  => 11, Normal data packet with on-pad click
         Bit5 => 1
-        Bit4 => when in absolute coordinate mode (valid when EN_PKT_GO is 1):
+        Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
                 0: left button is generated by the on-pad command
                 1: left button is generated by the external button
         Bit3 => 1
@@ -307,6 +313,110 @@
 	abs pkt 2, ..., notify packet (valid bit == 0)
 
 ==============================================================================
+* Absolute position for STL3888-Cx and STL3888-Dx.
+==============================================================================
+Single Finger, Absolute Coordinate Mode (SFAC)
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |0|1|0|P|1|M|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 |r|l|B|F|X|X|Y|Y|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordinates packet
+                  => 10, Notify packet
+	Bit5 => Coordinate mode(always 0 in SFAC mode):
+		0: single-finger absolute coordinates (SFAC) mode
+		1: multi-finger, multiple coordinates (MFMC) mode
+	Bit4 => 0: The LEFT button is generated by on-pad command (OPC)
+		1: The LEFT button is generated by external button
+		Default is 1 even if the LEFT button is not pressed.
+	Bit3 => Always 1, as specified by PS/2 protocol.
+	Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+	Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+	Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+	Bit3~Bit2 => X coordinate (ypos[1:0])
+	Bit4 => 4th mouse button(forward one page)
+	Bit5 => 5th mouse button(backward one page)
+	Bit6 => scroll left button
+	Bit7 => scroll right button
+
+Multi Finger, Multiple Coordinates Mode (MFMC):
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |0|1|1|P|1|F|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 |r|l|B|F|X|X|Y|Y|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordination packet
+                  => 10, Notify packet
+	Bit5 => Coordinate mode (always 1 in MFMC mode):
+		0: single-finger absolute coordinates (SFAC) mode
+		1: multi-finger, multiple coordinates (MFMC) mode
+	Bit4 => 0: The LEFT button is generated by on-pad command (OPC)
+		1: The LEFT button is generated by external button
+		Default is 1 even if the LEFT button is not pressed.
+	Bit3 => Always 1, as specified by PS/2 protocol.
+	Bit2 => Finger index, 0 is the first finger, 1 is the second finger.
+		If bit 1 and 0 are all 1 and bit 4 is 0, the middle external
+		button is pressed.
+	Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+	Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+	Bit3~Bit2 => X coordinate (ypos[1:0])
+	Bit4 => 4th mouse button(forward one page)
+	Bit5 => 5th mouse button(backward one page)
+	Bit6 => scroll left button
+	Bit7 => scroll right button
+
+  When one of the two fingers is up, the device will output four consecutive
+MFMC#0 report packets with zero X and Y to represent 1st finger is up or
+four consecutive MFMC#1 report packets with zero X and Y to represent that
+the 2nd finger is up.  On the other hand, if both fingers are up, the device
+will output four consecutive single-finger, absolute coordinate(SFAC) packets
+with zero X and Y.
+
+Notify Packet for STL3888-Cx/Dx
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |1|0|0|P|1|M|R|L|  2  |C|C|C|C|C|C|C|C|  3 |0|0|F|F|0|0|0|i|  4 |r|l|u|d|0|0|0|0|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordinates packet
+                  => 10, Notify packet
+	Bit5 => Always 0
+	Bit4 => 0: The LEFT button is generated by on-pad command(OPC)
+		1: The LEFT button is generated by external button
+		Default is 1 even if the LEFT button is not pressed.
+	Bit3 => 1
+	Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+	Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+	Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: Message type:
+	0xba => gesture information
+	0xc0 => one finger hold-rotating gesture
+Byte 3: The first parameter for the received message:
+	0xba => gesture ID (refer to the 'Gesture ID' section)
+	0xc0 => region ID
+Byte 4: The second parameter for the received message:
+	0xba => N/A
+	0xc0 => finger up/down information
+
+Sample sequence of Multi-finger, Multi-coordinates mode:
+
+	notify packet (valid bit == 1), MFMC packet 1 (byte 1, bit 2 == 0),
+	MFMC packet 2 (byte 1, bit 2 == 1), MFMC packet 1, MFMC packet 2,
+	..., notify packet (valid bit == 0)
+
+	That is, when the device is in MFMC mode, the host will receive
+	interleaved absolute coordinate packets for each finger.
+
+==============================================================================
 * FSP Enable/Disable packet
 ==============================================================================
    Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
@@ -348,9 +458,10 @@
 ==============================================================================
 1. Identify FSP by reading device ID(0x00) and version(0x01) register
 
-2. Determine number of buttons by reading status2 (0x0b) register
+2a. For FSP version < STL3888 Cx, determine number of buttons by reading
+    the 'test mode status' (0x20) register:
 
-	buttons = reg[0x0b] & 0x30
+	buttons = reg[0x20] & 0x30
 
 	if buttons == 0x30 or buttons == 0x20:
 		# two/four buttons
@@ -365,6 +476,10 @@
 		Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
 		section A for packet parsing detail
 
+2b. For FSP version >= STL3888 Cx:
+	Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
+	section A for packet parsing detail (ignore byte 4, bit ~ 7)
+
 ==============================================================================
 * Programming Sequence for Register Reading/Writing
 ==============================================================================
@@ -374,7 +489,7 @@
   Following values needed to be inverted(the '~' operator in C) before being
 sent to FSP:
 
-	0xe9, 0xee, 0xf2 and 0xff.
+	0xe8, 0xe9, 0xee, 0xf2, 0xf3 and 0xff.
 
 Register swapping requirement:
 
@@ -415,7 +530,18 @@
 
 	8. send 0xe9(status request) PS/2 command to FSP;
 
-	9. the response read from FSP should be the requested register value.
+	9. the 4th byte of the response read from FSP should be the
+	requested register value(?? indicates don't care byte):
+
+		host: 0xe9
+		3888: 0xfa (??) (??) (val)
+
+	* Note that since the Cx release, the hardware will return 1's
+	complement of the register value at the 3rd byte of status request
+	result:
+
+		host: 0xe9
+		3888: 0xfa (??) (~val) (val)
 
 Register writing sequence:
 
@@ -465,71 +591,194 @@
 
 	9. the register writing sequence is completed.
 
+	* Note that since the Cx release, the hardware will return 1's
+	complement of the register value at the 3rd byte of status request
+	result. Host can optionally send another 0xe9 (status request) PS/2
+	command to FSP at the end of register writing to verify that the
+	register writing operation is successful (?? indicates don't care
+	byte):
+
+		host: 0xe9
+		3888: 0xfa (??) (~val) (val)
+
+==============================================================================
+* Programming Sequence for Page Register Reading/Writing
+==============================================================================
+
+  In order to overcome the limitation of maximum number of registers
+supported, the hardware separates register into different groups called
+'pages.' Each page is able to include up to 255 registers.
+
+  The default page after power up is 0x82; therefore, if one has to get
+access to register 0x8301, one has to use following sequence to switch
+to page 0x83, then start reading/writing from/to offset 0x01 by using
+the register read/write sequence described in previous section.
+
+Page register reading sequence:
+
+	1. send 0xf3 PS/2 command to FSP;
+
+	2. send 0x66 PS/2 command to FSP;
+
+	3. send 0x88 PS/2 command to FSP;
+
+	4. send 0xf3 PS/2 command to FSP;
+
+	5. send 0x83 PS/2 command to FSP;
+
+	6. send 0x88 PS/2 command to FSP;
+
+	7. send 0xe9(status request) PS/2 command to FSP;
+
+	8. the response read from FSP should be the requested page value.
+
+Page register writing sequence:
+
+	1. send 0xf3 PS/2 command to FSP;
+
+	2. send 0x38 PS/2 command to FSP;
+
+	3. send 0x88 PS/2 command to FSP;
+
+	4. send 0xf3 PS/2 command to FSP;
+
+	5. if the page address being written is not required to be
+	inverted(refer to the 'Register inversion requirement' section),
+	goto step 6
+
+	5a. send 0x47 PS/2 command to FSP;
+
+	5b. send the inverted page address to FSP and goto step 9;
+
+	6. if the page address being written is not required to be
+	swapped(refer to the 'Register swapping requirement' section),
+	goto step 7
+
+	6a. send 0x44 PS/2 command to FSP;
+
+	6b. send the swapped page address to FSP and goto step 9;
+
+	7. send 0x33 PS/2 command to FSP;
+
+	8. send the page address to FSP;
+
+	9. the page register writing sequence is completed.
+
+==============================================================================
+* Gesture ID
+==============================================================================
+
+  Unlike other devices which sends multiple fingers' coordinates to host,
+FSP processes multiple fingers' coordinates internally and convert them
+into a 8 bits integer, namely 'Gesture ID.'  Following is a list of
+supported gesture IDs:
+
+	ID	Description
+	0x86	2 finger straight up
+	0x82	2 finger straight down
+	0x80	2 finger straight right
+	0x84	2 finger straight left
+	0x8f	2 finger zoom in
+	0x8b	2 finger zoom out
+	0xc0	2 finger curve, counter clockwise
+	0xc4	2 finger curve, clockwise
+	0x2e	3 finger straight up
+	0x2a	3 finger straight down
+	0x28	3 finger straight right
+	0x2c	3 finger straight left
+	0x38	palm
+
 ==============================================================================
 * Register Listing
 ==============================================================================
 
+  Registers are represented in 16 bits values. The higher 8 bits represent
+the page address and the lower 8 bits represent the relative offset within
+that particular page.  Refer to the 'Programming Sequence for Page Register
+Reading/Writing' section for instructions on how to change current page
+address.
+
 offset	width		default	r/w	name
-0x00	bit7~bit0	0x01	RO	device ID
+0x8200	bit7~bit0	0x01	RO	device ID
 
-0x01	bit7~bit0	0xc0	RW	version ID
+0x8201	bit7~bit0		RW	version ID
+					0xc1: STL3888 Ax
+					0xd0 ~ 0xd2: STL3888 Bx
+					0xe0 ~ 0xe1: STL3888 Cx
+					0xe2 ~ 0xe3: STL3888 Dx
 
-0x02	bit7~bit0	0x01	RO	vendor ID
+0x8202	bit7~bit0	0x01	RO	vendor ID
 
-0x03	bit7~bit0	0x01	RO	product ID
+0x8203	bit7~bit0	0x01	RO	product ID
 
-0x04	bit3~bit0	0x01	RW	revision ID
+0x8204	bit3~bit0	0x01	RW	revision ID
 
-0x0b				RO	test mode status 1
-	bit3		1	RO	0: rotate 180 degree, 1: no rotation
+0x820b					test mode status 1
+	bit3		1	RO	0: rotate 180 degree
+					1: no rotation
+					*only supported by H/W prior to Cx
 
-	bit5~bit4		RO	number of buttons
-			11 => 2, lbtn/rbtn
-			10 => 4, lbtn/rbtn/scru/scrd
-			01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr
-			00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn
+0x820f					register file page control
+	bit2		0	RW	1: rotate 180 degree
+					0: no rotation
+					*supported since Cx
 
-0x0f				RW	register file page control
 	bit0		0	RW	1 to enable page 1 register files
+					*only supported by H/W prior to Cx
 
-0x10				RW	system control 1
+0x8210				RW	system control 1
 	bit0		1	RW	Reserved, must be 1
 	bit1		0	RW	Reserved, must be 0
-	bit4		1	RW	Reserved, must be 0
-	bit5		0	RW	register clock gating enable
+	bit4		0	RW	Reserved, must be 0
+	bit5		1	RW	register clock gating enable
 					0: read only, 1: read/write enable
 	(Note that following registers does not require clock gating being
 	enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e
 	40 41 42 43.  In addition to that, this bit must be 1 when gesture
 	mode is enabled)
 
-0x31				RW	on-pad command detection
+0x8220					test mode status
+	bit5~bit4		RO	number of buttons
+					11 => 2, lbtn/rbtn
+					10 => 4, lbtn/rbtn/scru/scrd
+					01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr
+					00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn
+					*only supported by H/W prior to Cx
+
+0x8231				RW	on-pad command detection
 	bit7		0	RW	on-pad command left button down tag
 					enable
 					0: disable, 1: enable
+					*only supported by H/W prior to Cx
 
-0x34				RW	on-pad command control 5
+0x8234				RW	on-pad command control 5
 	bit4~bit0	0x05	RW	XLO in 0s/4/1, so 03h = 0010.1b = 2.5
 	(Note that position unit is in 0.5 scanline)
+					*only supported by H/W prior to Cx
 
 	bit7		0	RW	on-pad tap zone enable
 					0: disable, 1: enable
+					*only supported by H/W prior to Cx
 
-0x35				RW	on-pad command control 6
+0x8235				RW	on-pad command control 6
 	bit4~bit0	0x1d	RW	XHI in 0s/4/1, so 19h = 1100.1b = 12.5
 	(Note that position unit is in 0.5 scanline)
+					*only supported by H/W prior to Cx
 
-0x36				RW	on-pad command control 7
+0x8236				RW	on-pad command control 7
 	bit4~bit0	0x04	RW	YLO in 0s/4/1, so 03h = 0010.1b = 2.5
 	(Note that position unit is in 0.5 scanline)
+					*only supported by H/W prior to Cx
 
-0x37				RW	on-pad command control 8
+0x8237				RW	on-pad command control 8
 	bit4~bit0	0x13	RW	YHI in 0s/4/1, so 11h = 1000.1b = 8.5
 	(Note that position unit is in 0.5 scanline)
+					*only supported by H/W prior to Cx
 
-0x40				RW	system control 5
+0x8240				RW	system control 5
 	bit1		0	RW	FSP Intellimouse mode enable
 					0: disable, 1: enable
+					*only supported by H/W prior to Cx
 
 	bit2		0	RW	movement + abs. coordinate mode enable
 					0: disable, 1: enable
@@ -537,6 +786,7 @@
 	bit 1 is not set. However, the format is different from that of bit 1.
 	In addition, when bit 1 and bit 2 are set at the same time, bit 2 will
 	override bit 1.)
+					*only supported by H/W prior to Cx
 
 	bit3		0	RW	abs. coordinate only mode enable
 					0: disable, 1: enable
@@ -544,9 +794,11 @@
 	bit 1 is not set. However, the format is different from that of bit 1.
 	In addition, when bit 1, bit 2 and bit 3 are set at the same time,
 	bit 3 will override bit 1 and 2.)
+					*only supported by H/W prior to Cx
 
 	bit5		0	RW	auto switch enable
 					0: disable, 1: enable
+					*only supported by H/W prior to Cx
 
 	bit6		0	RW	G0 abs. + notify packet format enable
 					0: disable, 1: enable
@@ -554,18 +806,68 @@
 	bit 2 and 3.  That is, if any of those bit is 1, host will receive
 	absolute coordinates; otherwise, host only receives packets with
 	relative coordinate.)
+					*only supported by H/W prior to Cx
 
 	bit7		0	RW	EN_PS2_F2: PS/2 gesture mode 2nd
 					finger packet enable
 					0: disable, 1: enable
+					*only supported by H/W prior to Cx
 
-0x43				RW	on-pad control
+0x8243				RW	on-pad control
 	bit0		0	RW	on-pad control enable
 					0: disable, 1: enable
 	(Note that if this bit is cleared, bit 3/5 will be ineffective)
+					*only supported by H/W prior to Cx
 
 	bit3		0	RW	on-pad fix vertical scrolling enable
 					0: disable, 1: enable
+					*only supported by H/W prior to Cx
 
 	bit5		0	RW	on-pad fix horizontal scrolling enable
 					0: disable, 1: enable
+					*only supported by H/W prior to Cx
+
+0x8290				RW	software control register 1
+	bit0		0	RW	absolute coordination mode
+					0: disable, 1: enable
+					*supported since Cx
+
+	bit1		0	RW	gesture ID output
+					0: disable, 1: enable
+					*supported since Cx
+
+	bit2		0	RW	two fingers' coordinates output
+					0: disable, 1: enable
+					*supported since Cx
+
+	bit3		0	RW	finger up one packet output
+					0: disable, 1: enable
+					*supported since Cx
+
+	bit4		0	RW	absolute coordination continuous mode
+					0: disable, 1: enable
+					*supported since Cx
+
+	bit6~bit5	00	RW	gesture group selection
+					00: basic
+					01: suite
+					10: suite pro
+					11: advanced
+					*supported since Cx
+
+	bit7		0	RW	Bx packet output compatible mode
+					0: disable, 1: enable					*supported since Cx
+					*supported since Cx
+
+
+0x833d				RW	on-pad command control 1
+	bit7		1	RW	on-pad command detection enable
+					0: disable, 1: enable
+					*supported since Cx
+
+0x833e				RW	on-pad command detection
+	bit7		0	RW	on-pad command left button down tag
+					enable. Works only in H/W based PS/2
+					data packet mode.
+					0: disable, 1: enable
+					*supported since Cx
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 54078ed..4840334 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -149,6 +149,7 @@
 'M'	01-03	drivers/scsi/megaraid/megaraid_sas.h
 'M'	00-0F	drivers/video/fsl-diu-fb.h	conflict!
 'N'	00-1F	drivers/usb/scanner.h
+'N'	40-7F	drivers/block/nvme.c
 'O'     00-06   mtd/ubi-user.h		UBI
 'P'	all	linux/soundcard.h	conflict!
 'P'	60-6F	sound/sscape_ioctl.h	conflict!
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index f47cdef..ab0a984 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -33,14 +33,15 @@
 
 	=== 6 Architecture Makefiles
 	   --- 6.1 Set variables to tweak the build to the architecture
-	   --- 6.2 Add prerequisites to archprepare:
-	   --- 6.3 List directories to visit when descending
-	   --- 6.4 Architecture-specific boot images
-	   --- 6.5 Building non-kbuild targets
-	   --- 6.6 Commands useful for building a boot image
-	   --- 6.7 Custom kbuild commands
-	   --- 6.8 Preprocessing linker scripts
-	   --- 6.9 Generic header files
+	   --- 6.2 Add prerequisites to archheaders:
+	   --- 6.3 Add prerequisites to archprepare:
+	   --- 6.4 List directories to visit when descending
+	   --- 6.5 Architecture-specific boot images
+	   --- 6.6 Building non-kbuild targets
+	   --- 6.7 Commands useful for building a boot image
+	   --- 6.8 Custom kbuild commands
+	   --- 6.9 Preprocessing linker scripts
+	   --- 6.10 Generic header files
 
 	=== 7 Kbuild syntax for exported headers
 		--- 7.1 header-y
@@ -252,7 +253,7 @@
 	This will create a library lib.a based on delay.o. For kbuild to
 	actually recognize that there is a lib.a being built, the directory
 	shall be listed in libs-y.
-	See also "6.3 List directories to visit when descending".
+	See also "6.4 List directories to visit when descending".
 
 	Use of lib-y is normally restricted to lib/ and arch/*/lib.
 
@@ -974,7 +975,20 @@
 	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
 	mode) if this option is supported by $(AR).
 
---- 6.2 Add prerequisites to archprepare:
+--- 6.2 Add prerequisites to archheaders:
+
+	The archheaders: rule is used to generate header files that
+	may be installed into user space by "make header_install" or
+	"make headers_install_all".  In order to support
+	"make headers_install_all", this target has to be able to run
+	on an unconfigured tree, or a tree configured for another
+	architecture.
+
+	It is run before "make archprepare" when run on the
+	architecture itself.
+
+
+--- 6.3 Add prerequisites to archprepare:
 
 	The archprepare: rule is used to list prerequisites that need to be
 	built before starting to descend down in the subdirectories.
@@ -990,7 +1004,7 @@
 	generating offset header files.
 
 
---- 6.3 List directories to visit when descending
+--- 6.4 List directories to visit when descending
 
 	An arch Makefile cooperates with the top Makefile to define variables
 	which specify how to build the vmlinux file.  Note that there is no
@@ -1019,7 +1033,7 @@
 		drivers-$(CONFIG_OPROFILE)  += arch/sparc64/oprofile/
 
 
---- 6.4 Architecture-specific boot images
+--- 6.5 Architecture-specific boot images
 
 	An arch Makefile specifies goals that take the vmlinux file, compress
 	it, wrap it in bootstrapping code, and copy the resulting files
@@ -1070,7 +1084,7 @@
 
 	When "make" is executed without arguments, bzImage will be built.
 
---- 6.5 Building non-kbuild targets
+--- 6.6 Building non-kbuild targets
 
     extra-y
 
@@ -1090,7 +1104,7 @@
 	shall be built, but shall not be linked as part of built-in.o.
 
 
---- 6.6 Commands useful for building a boot image
+--- 6.7 Commands useful for building a boot image
 
 	Kbuild provides a few macros that are useful when building a
 	boot image.
@@ -1112,7 +1126,7 @@
 	always be built.
 	Assignments to $(targets) are without $(obj)/ prefix.
 	if_changed may be used in conjunction with custom commands as
-	defined in 6.7 "Custom kbuild commands".
+	defined in 6.8 "Custom kbuild commands".
 
 	Note: It is a typical mistake to forget the FORCE prerequisite.
 	Another common pitfall is that whitespace is sometimes
@@ -1171,7 +1185,7 @@
 		$(obj)/%.dtb: $(src)/%.dts
 			$(call cmd,dtc)
 
---- 6.7 Custom kbuild commands
+--- 6.8 Custom kbuild commands
 
 	When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand
 	of a command is normally displayed.
@@ -1198,7 +1212,7 @@
 	will be displayed with "make KBUILD_VERBOSE=0".
 
 
---- 6.8 Preprocessing linker scripts
+--- 6.9 Preprocessing linker scripts
 
 	When the vmlinux image is built, the linker script
 	arch/$(ARCH)/kernel/vmlinux.lds is used.
@@ -1228,7 +1242,7 @@
 	The kbuild infrastructure for *lds file are used in several
 	architecture-specific files.
 
---- 6.9 Generic header files
+--- 6.10 Generic header files
 
 	The directory include/asm-generic contains the header files
 	that may be shared between individual architectures.
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 7a9e0b4..506c739 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -17,8 +17,8 @@
 memory image to a dump file on the local disk, or across the network to
 a remote system.
 
-Kdump and kexec are currently supported on the x86, x86_64, ppc64 and ia64
-architectures.
+Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
+and s390x architectures.
 
 When the system kernel boots, it reserves a small section of memory for
 the dump-capture kernel. This ensures that ongoing Direct Memory Access
@@ -34,11 +34,18 @@
 booting regardless of where the kernel is loaded and to support 64K page
 size kexec backs up the first 64KB memory.
 
+For s390x, when kdump is triggered, the crashkernel region is exchanged
+with the region [0, crashkernel region size] and then the kdump kernel
+runs in [0, crashkernel region size]. Therefore no relocatable kernel is
+needed for s390x.
+
 All of the necessary information about the system kernel's core image is
 encoded in the ELF format, and stored in a reserved area of memory
 before a crash. The physical address of the start of the ELF header is
 passed to the dump-capture kernel through the elfcorehdr= boot
-parameter.
+parameter. Optionally the size of the ELF header can also be passed
+when using the elfcorehdr=[size[KMG]@]offset[KMG] syntax.
+
 
 With the dump-capture kernel, you can access the memory image, or "old
 memory," in two ways:
@@ -291,6 +298,10 @@
    The region may be automatically placed on ia64, see the
    dump-capture kernel config option notes above.
 
+   On s390x, typically use "crashkernel=xxM". The value of xx is dependent
+   on the memory consumption of the kdump system. In general this is not
+   dependent on the memory size of the production system.
+
 Load the Dump-capture Kernel
 ============================
 
@@ -308,6 +319,8 @@
 	- Use vmlinux
 For ia64:
 	- Use vmlinux or vmlinuz.gz
+For s390x:
+	- Use image or bzImage
 
 
 If you are using a uncompressed vmlinux image then use following command
@@ -337,6 +350,8 @@
 For ppc64:
 	"1 maxcpus=1 noirqdistrib reset_devices"
 
+For s390x:
+	"1 maxcpus=1 cgroup_disable=memory"
 
 Notes on loading the dump-capture kernel:
 
@@ -362,6 +377,20 @@
   dump. Hence generally it is useful either to build a UP dump-capture
   kernel or specify maxcpus=1 option while loading dump-capture kernel.
 
+* For s390x there are two kdump modes: If a ELF header is specified with
+  the elfcorehdr= kernel parameter, it is used by the kdump kernel as it
+  is done on all other architectures. If no elfcorehdr= kernel parameter is
+  specified, the s390x kdump kernel dynamically creates the header. The
+  second mode has the advantage that for CPU and memory hotplug, kdump has
+  not to be reloaded with kexec_load().
+
+* For s390x systems with many attached devices the "cio_ignore" kernel
+  parameter should be used for the kdump kernel in order to prevent allocation
+  of kernel memory for devices that are not relevant for kdump. The same
+  applies to systems that use SCSI/FCP devices. In that case the
+  "allow_lun_scan" zfcp module parameter should be set to zero before
+  setting FCP devices online.
+
 Kernel Panic
 ============
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 81c287f..033d4e6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -329,6 +329,11 @@
 				    is a lot of faster
 			off	  - do not initialize any AMD IOMMU found in
 				    the system
+			force_isolation - Force device isolation for all
+					  devices. The IOMMU driver is not
+					  allowed anymore to lift isolation
+					  requirements as needed. This option
+					  does not override iommu=pt
 
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
@@ -623,6 +628,25 @@
 	no_debug_objects
 			[KNL] Disable object debugging
 
+	debug_guardpage_minorder=
+			[KNL] When CONFIG_DEBUG_PAGEALLOC is set, this
+			parameter allows control of the order of pages that will
+			be intentionally kept free (and hence protected) by the
+			buddy allocator. Bigger value increase the probability
+			of catching random memory corruption, but reduce the
+			amount of memory for normal system use. The maximum
+			possible value is MAX_ORDER/2.  Setting this parameter
+			to 1 or 2 should be enough to identify most random
+			memory corruption problems caused by bugs in kernel or
+			driver code when a CPU writes to (or reads from) a
+			random memory location. Note that there exists a class
+			of memory corruptions problems caused by buggy H/W or
+			F/W or by drivers badly programing DMA (basically when
+			memory is written at bus level and the CPU MMU is
+			bypassed) which are not detectable by
+			CONFIG_DEBUG_PAGEALLOC, hence this option will not help
+			tracking down these problems.
+
 	debugpat	[X86] Enable PAT debugging
 
 	decnet.addr=	[HW,NET]
@@ -1035,6 +1059,11 @@
 			By default, super page will be supported if Intel IOMMU
 			has the capability. With this option, super page will
 			not be supported.
+
+	intel_idle.max_cstate=	[KNL,HW,ACPI,X86]
+			0	disables intel_idle and fall back on acpi_idle.
+			1 to 6	specify maximum depth of C-state.
+
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)
 			off	disable Interrupt Remapping
@@ -1059,7 +1088,9 @@
 		nomerge
 		forcesac
 		soft
-		pt	[x86, IA-64]
+		pt		[x86, IA-64]
+		group_mf	[x86, IA-64]
+
 
 	io7=		[HW] IO7 for Marvel based alpha systems
 			See comment before marvel_specify_io7 in
@@ -1178,9 +1209,6 @@
 	kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
 			Default is 0 (don't ignore, but inject #GP)
 
-	kvm.oos_shadow=	[KVM] Disable out-of-sync shadow paging.
-			Default is 1 (enabled)
-
 	kvm.mmu_audit=	[KVM] This is a R/W parameter which allows audit
 			KVM MMU at runtime.
 			Default is 0 (off)
@@ -1630,12 +1658,17 @@
 			The default is to return 64-bit inode numbers.
 
 	nfs.nfs4_disable_idmapping=
-			[NFSv4] When set, this option disables the NFSv4
-			idmapper on the client, but only if the mount
-			is using the 'sec=sys' security flavour. This may
-			make migration from legacy NFSv2/v3 systems easier
-			provided that the server has the appropriate support.
-			The default is to always enable NFSv4 idmapping.
+			[NFSv4] When set to the default of '1', this option
+			ensures that both the RPC level authentication
+			scheme and the NFS level operations agree to use
+			numeric uids/gids if the mount is using the
+			'sec=sys' security flavour. In effect it is
+			disabling idmapping, which can make migration from
+			legacy NFSv2/v3 systems to NFSv4 easier.
+			Servers that do not support this mode of operation
+			will be autodetected by the client, and it will fall
+			back to using the idmapper.
+			To turn off this behaviour, set the value to '0'.
 
 	nmi_debug=	[KNL,AVR32,SH] Specify one or more actions to take
 			when a NMI is triggered.
@@ -1796,6 +1829,10 @@
 	nomfgpt		[X86-32] Disable Multi-Function General Purpose
 			Timer usage (for AMD Geode machines).
 
+	nonmi_ipi	[X86] Disable using NMI IPIs during panic/reboot to
+			shutdown the other cpus.  Instead use the REBOOT_VECTOR
+			irq.
+
 	nopat		[X86] Disable PAT (page attribute table extension of
 			pagetables) support.
 
@@ -1885,6 +1922,11 @@
 			arch_perfmon: [X86] Force use of architectural
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
+			timer: [X86] Force use of architectural NMI
+				timer mode (see also oprofile.timer
+				for generic hr timer mode)
+				[s390] Force legacy basic mode sampling
+                                (report cpu_type "timer")
 
 	oops=panic	Always panic on oopses. Default is to just kill the
 			process, but there is a small probability of
@@ -2362,6 +2404,12 @@
 
 	slram=		[HW,MTD]
 
+	slab_max_order=	[MM, SLAB]
+			Determines the maximum allowed order for slabs.
+			A high setting may cause OOMs due to memory
+			fragmentation.  Defaults to 1 for systems with
+			more than 32MB of RAM, 0 otherwise.
+
 	slub_debug[=options[,slabs]]	[MM, SLUB]
 			Enabling slub_debug allows one to determine the
 			culprit if slab objects become corrupted. Enabling
@@ -2432,6 +2480,14 @@
 	stacktrace	[FTRACE]
 			Enabled the stack tracer on boot up.
 
+	stacktrace_filter=[function-list]
+			[FTRACE] Limit the functions that the stack tracer
+			will trace at boot up. function-list is a comma separated
+			list of functions. This list can be changed at run
+			time by the stack_trace_filter file in the debugfs
+			tracing directory. Note, this enables stack tracing
+			and the stacktrace above is not needed.
+
 	sti=		[PARISC,HW]
 			Format: <num>
 			Set the STI (builtin display/keyboard on the HP-PARISC
@@ -2632,6 +2688,10 @@
 			[USB] Start with the old device initialization
 			scheme (default 0 = off).
 
+	usbcore.usbfs_memory_mb=
+			[USB] Memory limit (in MB) for buffers allocated by
+			usbfs (default = 16, 0 = max = 2047).
+
 	usbcore.use_both_schemes=
 			[USB] Try the other device initialization scheme
 			if the first one fails (default 1 = enabled).
@@ -2750,11 +2810,10 @@
 			functions are at fixed addresses, they make nice
 			targets for exploits that can control RIP.
 
-			emulate     Vsyscalls turn into traps and are emulated
-			            reasonably safely.
+			emulate     [default] Vsyscalls turn into traps and are
+			            emulated reasonably safely.
 
-			native      [default] Vsyscalls are native syscall
-			            instructions.
+			native      Vsyscalls are native syscall instructions.
 			            This is a little bit faster than trapping
 			            and makes a few dynamic recompilers work
 			            better than they would in emulation mode.
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 51063e6..b6e3973 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -127,7 +127,10 @@
 
 kmemleak_init		 - initialize kmemleak
 kmemleak_alloc		 - notify of a memory block allocation
+kmemleak_alloc_percpu	 - notify of a percpu memory block allocation
 kmemleak_free		 - notify of a memory block freeing
+kmemleak_free_part	 - notify of a partial memory block freeing
+kmemleak_free_percpu	 - notify of a percpu memory block freeing
 kmemleak_not_leak	 - mark an object as not a leak
 kmemleak_ignore		 - do not scan or report an object as leak
 kmemleak_scan_area	 - add scan areas inside a memory block
diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt
index abf768c..5dbc99c 100644
--- a/Documentation/lockdep-design.txt
+++ b/Documentation/lockdep-design.txt
@@ -221,3 +221,66 @@
 table, which hash-table can be checked in a lockfree manner. If the
 locking chain occurs again later on, the hash table tells us that we
 dont have to validate the chain again.
+
+Troubleshooting:
+----------------
+
+The validator tracks a maximum of MAX_LOCKDEP_KEYS number of lock classes.
+Exceeding this number will trigger the following lockdep warning:
+
+	(DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS))
+
+By default, MAX_LOCKDEP_KEYS is currently set to 8191, and typical
+desktop systems have less than 1,000 lock classes, so this warning
+normally results from lock-class leakage or failure to properly
+initialize locks.  These two problems are illustrated below:
+
+1.	Repeated module loading and unloading while running the validator
+	will result in lock-class leakage.  The issue here is that each
+	load of the module will create a new set of lock classes for
+	that module's locks, but module unloading does not remove old
+	classes (see below discussion of reuse of lock classes for why).
+	Therefore, if that module is loaded and unloaded repeatedly,
+	the number of lock classes will eventually reach the maximum.
+
+2.	Using structures such as arrays that have large numbers of
+	locks that are not explicitly initialized.  For example,
+	a hash table with 8192 buckets where each bucket has its own
+	spinlock_t will consume 8192 lock classes -unless- each spinlock
+	is explicitly initialized at runtime, for example, using the
+	run-time spin_lock_init() as opposed to compile-time initializers
+	such as __SPIN_LOCK_UNLOCKED().  Failure to properly initialize
+	the per-bucket spinlocks would guarantee lock-class overflow.
+	In contrast, a loop that called spin_lock_init() on each lock
+	would place all 8192 locks into a single lock class.
+
+	The moral of this story is that you should always explicitly
+	initialize your locks.
+
+One might argue that the validator should be modified to allow
+lock classes to be reused.  However, if you are tempted to make this
+argument, first review the code and think through the changes that would
+be required, keeping in mind that the lock classes to be removed are
+likely to be linked into the lock-dependency graph.  This turns out to
+be harder to do than to say.
+
+Of course, if you do run out of lock classes, the next thing to do is
+to find the offending lock classes.  First, the following command gives
+you the number of lock classes currently in use along with the maximum:
+
+	grep "lock-classes" /proc/lockdep_stats
+
+This command produces the following output on a modest system:
+
+	 lock-classes:                          748 [max: 8191]
+
+If the number allocated (748 above) increases continually over time,
+then there is likely a leak.  The following command can be used to
+identify the leaking lock classes:
+
+	grep "BD" /proc/lockdep
+
+Run the command and save the output, then compare against the output from
+a later run of this command to identify the leakers.  This same output
+can also help you find situations where runtime lock initialization has
+been omitted.
diff --git a/Documentation/md.txt b/Documentation/md.txt
index fc94770..993fba3 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -357,14 +357,14 @@
         written to, that device.
 
       state
-        A file recording the current state of the device in the array
+	A file recording the current state of the device in the array
 	which can be a comma separated list of
 	      faulty   - device has been kicked from active use due to
-                         a detected fault or it has unacknowledged bad
-                         blocks
+			 a detected fault, or it has unacknowledged bad
+			 blocks
 	      in_sync  - device is a fully in-sync member of the array
 	      writemostly - device will only be subject to read
-		         requests if there are no other options.
+			 requests if there are no other options.
 			 This applies only to raid1 arrays.
 	      blocked  - device has failed, and the failure hasn't been
 			 acknowledged yet by the metadata handler.
@@ -374,6 +374,13 @@
 			 This includes spares that are in the process
 			 of being recovered to
 	      write_error - device has ever seen a write error.
+	      want_replacement - device is (mostly) working but probably
+			 should be replaced, either due to errors or
+			 due to user request.
+	      replacement - device is a replacement for another active
+			 device with same raid_disk.
+
+
 	This list may grow in future.
 	This can be written to.
 	Writing "faulty"  simulates a failure on the device.
@@ -386,6 +393,13 @@
 	Writing "in_sync" sets the in_sync flag.
 	Writing "write_error" sets writeerrorseen flag.
 	Writing "-write_error" clears writeerrorseen flag.
+	Writing "want_replacement" is allowed at any time except to a
+		replacement device or a spare.  It sets the flag.
+	Writing "-want_replacement" is allowed at any time.  It clears
+		the flag.
+	Writing "replacement" or "-replacement" is only allowed before
+		starting the array.  It sets or clears the flag.
+
 
 	This file responds to select/poll. Any change to 'faulty'
 	or 'blocked' causes an event.
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
index 8898a95..22ae844 100644
--- a/Documentation/mmc/mmc-dev-attrs.txt
+++ b/Documentation/mmc/mmc-dev-attrs.txt
@@ -64,3 +64,13 @@
 	size specified by the card.
 
 	"preferred_erase_size" is in bytes.
+
+SD/MMC/SDIO Clock Gating Attribute
+==================================
+
+Read and write access is provided to following attribute.
+This attribute appears only if CONFIG_MMC_CLKGATE is enabled.
+
+	clkgate_delay	Tune the clock gating delay with desired value in milliseconds.
+
+echo <desired delay> > /sys/class/mmc_host/mmcX/clkgate_delay
diff --git a/Documentation/mmc/mmc-dev-parts.txt b/Documentation/mmc/mmc-dev-parts.txt
index 2db28b8..f08d078 100644
--- a/Documentation/mmc/mmc-dev-parts.txt
+++ b/Documentation/mmc/mmc-dev-parts.txt
@@ -25,3 +25,16 @@
 To re-enable read-only access:
 
 echo 1 > /sys/block/mmcblkXbootY/force_ro
+
+The boot partitions can also be locked read only until the next power on,
+with:
+
+echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
+
+This is a feature of the card and not of the kernel. If the card does
+not support boot partition locking, the file will not exist. If the
+feature has been disabled on the card, the file will be read-only.
+
+The boot partitions can also be locked permanently, but this feature is
+not accessible through sysfs in order to avoid accidental or malicious
+bricking.
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index bbce121..9ad9dde 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -144,6 +144,8 @@
 	- The Linux Near Field Communication (NFS) subsystem.
 olympic.txt
 	- IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info.
+openvswitch.txt
+	- Open vSwitch developer documentation.
 operstates.txt
 	- Overview of network interface operational states.
 packet_mmap.txt
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index c86d03f..221ad0c 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -200,15 +200,16 @@
 
 0 - All  debug  output  disabled
 1 - Enable messages related to routing / flooding / broadcasting
-2 - Enable route or tt entry added / changed / deleted
-3 - Enable all messages
+2 - Enable messages related to route added / changed / deleted
+4 - Enable messages related to translation table operations
+7 - Enable all messages
 
 The debug output can be changed at runtime  using  the  file
 /sys/class/net/bat0/mesh/log_level. e.g.
 
 # echo 2 > /sys/class/net/bat0/mesh/log_level
 
-will enable debug messages for when routes or TTs change.
+will enable debug messages for when routes change.
 
 
 BATCTL
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 91df678..080ad26 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -196,6 +196,23 @@
 
 	The parameters are as follows:
 
+active_slave
+
+	Specifies the new active slave for modes that support it
+	(active-backup, balance-alb and balance-tlb).  Possible values
+	are the name of any currently enslaved interface, or an empty
+	string.  If a name is given, the slave and its link must be up in order
+	to be selected as the new active slave.  If an empty string is
+	specified, the current active slave is cleared, and a new active
+	slave is selected automatically.
+
+	Note that this is only available through the sysfs interface. No module
+	parameter by this name exists.
+
+	The normal value of this option is the name of the currently
+	active slave, or the empty string if there is no active slave or
+	the current mode does not use an active slave.
+
 ad_select
 
 	Specifies the 802.3ad aggregation selection logic to use.  The
diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
index f41ea24..1dc1c24 100644
--- a/Documentation/networking/ieee802154.txt
+++ b/Documentation/networking/ieee802154.txt
@@ -78,3 +78,30 @@
 
 See header include/net/mac802154.h and several drivers in drivers/ieee802154/.
 
+6LoWPAN Linux implementation
+============================
+
+The IEEE 802.15.4 standard specifies an MTU of 128 bytes, yielding about 80
+octets of actual MAC payload once security is turned on, on a wireless link
+with a link throughput of 250 kbps or less.  The 6LoWPAN adaptation format
+[RFC4944] was specified to carry IPv6 datagrams over such constrained links,
+taking into account limited bandwidth, memory, or energy resources that are
+expected in applications such as wireless Sensor Networks.  [RFC4944] defines
+a Mesh Addressing header to support sub-IP forwarding, a Fragmentation header
+to support the IPv6 minimum MTU requirement [RFC2460], and stateless header
+compression for IPv6 datagrams (LOWPAN_HC1 and LOWPAN_HC2) to reduce the
+relatively large IPv6 and UDP headers down to (in the best case) several bytes.
+
+In Semptember 2011 the standard update was published - [RFC6282].
+It deprecates HC1 and HC2 compression and defines IPHC encoding format which is
+used in this Linux implementation.
+
+All the code related to 6lowpan you may find in files: net/ieee802154/6lowpan.*
+
+To setup 6lowpan interface you need (busybox release > 1.17.0):
+1. Add IEEE802.15.4 interface and initialize PANid;
+2. Add 6lowpan interface by command like:
+   # ip link add link wpan0 name lowpan0 type lowpan
+3. Set MAC (if needs):
+   # ip link set lowpan0 address de:ad:be:ef:ca:fe:ba:be
+4. Bring up 'lowpan0' interface
diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c
index 65968fb..ac5debb 100644
--- a/Documentation/networking/ifenslave.c
+++ b/Documentation/networking/ifenslave.c
@@ -539,12 +539,14 @@
 		metric = 0;
 	} else
 		metric = ifr.ifr_metric;
+	printf("The result of SIOCGIFMETRIC is %d\n", metric);
 
 	strcpy(ifr.ifr_name, ifname);
 	if (ioctl(skfd, SIOCGIFMTU, &ifr) < 0)
 		mtu = 0;
 	else
 		mtu = ifr.ifr_mtu;
+	printf("The result of SIOCGIFMTU is %d\n", mtu);
 
 	strcpy(ifr.ifr_name, ifname);
 	if (ioctl(skfd, SIOCGIFDSTADDR, &ifr) < 0) {
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 589f2da..ad3e80e 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -31,6 +31,16 @@
 	when using large numbers of interfaces and when communicating
 	with large numbers of directly-connected peers.
 
+neigh/default/unres_qlen_bytes - INTEGER
+	The maximum number of bytes which may be used by packets
+	queued for each	unresolved address by other network layers.
+	(added in linux 3.3)
+
+neigh/default/unres_qlen - INTEGER
+	The maximum number of packets which may be queued for each
+	unresolved address by other network layers.
+	(deprecated in linux 3.3) : use unres_qlen_bytes instead.
+
 mtu_expires - INTEGER
 	Time, in seconds, that cached PMTU information is kept.
 
@@ -165,6 +175,9 @@
 	connections. The algorithm "reno" is always available, but
 	additional choices may be available based on kernel configuration.
 	Default is set as part of kernel configuration.
+	For passive connections, the listener congestion control choice
+	is inherited.
+	[see setsockopt(listenfd, SOL_TCP, TCP_CONGESTION, "name" ...) ]
 
 tcp_cookie_size - INTEGER
 	Default size of TCP Cookie Transactions (TCPCT) option, that may be
diff --git a/Documentation/networking/openvswitch.txt b/Documentation/networking/openvswitch.txt
new file mode 100644
index 0000000..b8a048b
--- /dev/null
+++ b/Documentation/networking/openvswitch.txt
@@ -0,0 +1,195 @@
+Open vSwitch datapath developer documentation
+=============================================
+
+The Open vSwitch kernel module allows flexible userspace control over
+flow-level packet processing on selected network devices.  It can be
+used to implement a plain Ethernet switch, network device bonding,
+VLAN processing, network access control, flow-based network control,
+and so on.
+
+The kernel module implements multiple "datapaths" (analogous to
+bridges), each of which can have multiple "vports" (analogous to ports
+within a bridge).  Each datapath also has associated with it a "flow
+table" that userspace populates with "flows" that map from keys based
+on packet headers and metadata to sets of actions.  The most common
+action forwards the packet to another vport; other actions are also
+implemented.
+
+When a packet arrives on a vport, the kernel module processes it by
+extracting its flow key and looking it up in the flow table.  If there
+is a matching flow, it executes the associated actions.  If there is
+no match, it queues the packet to userspace for processing (as part of
+its processing, userspace will likely set up a flow to handle further
+packets of the same type entirely in-kernel).
+
+
+Flow key compatibility
+----------------------
+
+Network protocols evolve over time.  New protocols become important
+and existing protocols lose their prominence.  For the Open vSwitch
+kernel module to remain relevant, it must be possible for newer
+versions to parse additional protocols as part of the flow key.  It
+might even be desirable, someday, to drop support for parsing
+protocols that have become obsolete.  Therefore, the Netlink interface
+to Open vSwitch is designed to allow carefully written userspace
+applications to work with any version of the flow key, past or future.
+
+To support this forward and backward compatibility, whenever the
+kernel module passes a packet to userspace, it also passes along the
+flow key that it parsed from the packet.  Userspace then extracts its
+own notion of a flow key from the packet and compares it against the
+kernel-provided version:
+
+    - If userspace's notion of the flow key for the packet matches the
+      kernel's, then nothing special is necessary.
+
+    - If the kernel's flow key includes more fields than the userspace
+      version of the flow key, for example if the kernel decoded IPv6
+      headers but userspace stopped at the Ethernet type (because it
+      does not understand IPv6), then again nothing special is
+      necessary.  Userspace can still set up a flow in the usual way,
+      as long as it uses the kernel-provided flow key to do it.
+
+    - If the userspace flow key includes more fields than the
+      kernel's, for example if userspace decoded an IPv6 header but
+      the kernel stopped at the Ethernet type, then userspace can
+      forward the packet manually, without setting up a flow in the
+      kernel.  This case is bad for performance because every packet
+      that the kernel considers part of the flow must go to userspace,
+      but the forwarding behavior is correct.  (If userspace can
+      determine that the values of the extra fields would not affect
+      forwarding behavior, then it could set up a flow anyway.)
+
+How flow keys evolve over time is important to making this work, so
+the following sections go into detail.
+
+
+Flow key format
+---------------
+
+A flow key is passed over a Netlink socket as a sequence of Netlink
+attributes.  Some attributes represent packet metadata, defined as any
+information about a packet that cannot be extracted from the packet
+itself, e.g. the vport on which the packet was received.  Most
+attributes, however, are extracted from headers within the packet,
+e.g. source and destination addresses from Ethernet, IP, or TCP
+headers.
+
+The <linux/openvswitch.h> header file defines the exact format of the
+flow key attributes.  For informal explanatory purposes here, we write
+them as comma-separated strings, with parentheses indicating arguments
+and nesting.  For example, the following could represent a flow key
+corresponding to a TCP packet that arrived on vport 1:
+
+    in_port(1), eth(src=e0:91:f5:21:d0:b2, dst=00:02:e3:0f:80:a4),
+    eth_type(0x0800), ipv4(src=172.16.0.20, dst=172.18.0.52, proto=17, tos=0,
+    frag=no), tcp(src=49163, dst=80)
+
+Often we ellipsize arguments not important to the discussion, e.g.:
+
+    in_port(1), eth(...), eth_type(0x0800), ipv4(...), tcp(...)
+
+
+Basic rule for evolving flow keys
+---------------------------------
+
+Some care is needed to really maintain forward and backward
+compatibility for applications that follow the rules listed under
+"Flow key compatibility" above.
+
+The basic rule is obvious:
+
+    ------------------------------------------------------------------
+    New network protocol support must only supplement existing flow
+    key attributes.  It must not change the meaning of already defined
+    flow key attributes.
+    ------------------------------------------------------------------
+
+This rule does have less-obvious consequences so it is worth working
+through a few examples.  Suppose, for example, that the kernel module
+did not already implement VLAN parsing.  Instead, it just interpreted
+the 802.1Q TPID (0x8100) as the Ethertype then stopped parsing the
+packet.  The flow key for any packet with an 802.1Q header would look
+essentially like this, ignoring metadata:
+
+    eth(...), eth_type(0x8100)
+
+Naively, to add VLAN support, it makes sense to add a new "vlan" flow
+key attribute to contain the VLAN tag, then continue to decode the
+encapsulated headers beyond the VLAN tag using the existing field
+definitions.  With this change, an TCP packet in VLAN 10 would have a
+flow key much like this:
+
+    eth(...), vlan(vid=10, pcp=0), eth_type(0x0800), ip(proto=6, ...), tcp(...)
+
+But this change would negatively affect a userspace application that
+has not been updated to understand the new "vlan" flow key attribute.
+The application could, following the flow compatibility rules above,
+ignore the "vlan" attribute that it does not understand and therefore
+assume that the flow contained IP packets.  This is a bad assumption
+(the flow only contains IP packets if one parses and skips over the
+802.1Q header) and it could cause the application's behavior to change
+across kernel versions even though it follows the compatibility rules.
+
+The solution is to use a set of nested attributes.  This is, for
+example, why 802.1Q support uses nested attributes.  A TCP packet in
+VLAN 10 is actually expressed as:
+
+    eth(...), eth_type(0x8100), vlan(vid=10, pcp=0), encap(eth_type(0x0800),
+    ip(proto=6, ...), tcp(...)))
+
+Notice how the "eth_type", "ip", and "tcp" flow key attributes are
+nested inside the "encap" attribute.  Thus, an application that does
+not understand the "vlan" key will not see either of those attributes
+and therefore will not misinterpret them.  (Also, the outer eth_type
+is still 0x8100, not changed to 0x0800.)
+
+Handling malformed packets
+--------------------------
+
+Don't drop packets in the kernel for malformed protocol headers, bad
+checksums, etc.  This would prevent userspace from implementing a
+simple Ethernet switch that forwards every packet.
+
+Instead, in such a case, include an attribute with "empty" content.
+It doesn't matter if the empty content could be valid protocol values,
+as long as those values are rarely seen in practice, because userspace
+can always forward all packets with those values to userspace and
+handle them individually.
+
+For example, consider a packet that contains an IP header that
+indicates protocol 6 for TCP, but which is truncated just after the IP
+header, so that the TCP header is missing.  The flow key for this
+packet would include a tcp attribute with all-zero src and dst, like
+this:
+
+    eth(...), eth_type(0x0800), ip(proto=6, ...), tcp(src=0, dst=0)
+
+As another example, consider a packet with an Ethernet type of 0x8100,
+indicating that a VLAN TCI should follow, but which is truncated just
+after the Ethernet type.  The flow key for this packet would include
+an all-zero-bits vlan and an empty encap attribute, like this:
+
+    eth(...), eth_type(0x8100), vlan(0), encap()
+
+Unlike a TCP packet with source and destination ports 0, an
+all-zero-bits VLAN TCI is not that rare, so the CFI bit (aka
+VLAN_TAG_PRESENT inside the kernel) is ordinarily set in a vlan
+attribute expressly to allow this situation to be distinguished.
+Thus, the flow key in this second example unambiguously indicates a
+missing or malformed VLAN TCI.
+
+Other rules
+-----------
+
+The other rules for flow keys are much less subtle:
+
+    - Duplicate attributes are not allowed at a given nesting level.
+
+    - Ordering of attributes is not significant.
+
+    - When the kernel sends a given flow key to userspace, it always
+      composes it the same way.  This allows userspace to hash and
+      compare entire flow keys that it may not be able to fully
+      interpret.
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 4acea66..1c08a4b 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -155,7 +155,7 @@
 
  /* fill sockaddr_ll struct to prepare binding */
  my_addr.sll_family = AF_PACKET;
- my_addr.sll_protocol = ETH_P_ALL;
+ my_addr.sll_protocol = htons(ETH_P_ALL);
  my_addr.sll_ifindex =  s_ifr.ifr_ifindex;
 
  /* bind socket to eth0 */
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index a177de2..579994a 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -208,7 +208,7 @@
 CPU's backlog when a packet in this flow was last enqueued. Each backlog
 queue has a head counter that is incremented on dequeue. A tail counter
 is computed as head counter + queue length. In other words, the counter
-in rps_dev_flow_table[i] records the last element in flow i that has
+in rps_dev_flow[i] records the last element in flow i that has
 been enqueued onto the currently designated CPU for flow i (of course,
 entry i is actually selected by hash and multiple flows may hash to the
 same entry i).
@@ -224,7 +224,7 @@
 
 - The current CPU's queue head counter >= the recorded tail counter
   value in rps_dev_flow[i]
-- The current CPU is unset (equal to NR_CPUS)
+- The current CPU is unset (equal to RPS_NO_CPU)
 - The current CPU is offline
 
 After this check, the packet is sent to the (possibly updated) current
@@ -235,7 +235,7 @@
 
 ==== RFS Configuration
 
-RFS is only available if the kconfig symbol CONFIG_RFS is enabled (on
+RFS is only available if the kconfig symbol CONFIG_RPS is enabled (on
 by default for SMP). The functionality remains disabled until explicitly
 configured. The number of entries in the global flow table is set through:
 
@@ -258,7 +258,7 @@
 would normally be configured to the same value as rps_sock_flow_entries.
 For a multi-queue device, the rps_flow_cnt for each queue might be
 configured as rps_sock_flow_entries / N, where N is the number of
-queues. So for instance, if rps_flow_entries is set to 32768 and there
+queues. So for instance, if rps_sock_flow_entries is set to 32768 and there
 are 16 configured receive queues, rps_flow_cnt for each queue might be
 configured as 2048.
 
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index 8d67980..d0aeead 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -4,14 +4,16 @@
 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 
 This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
-(Synopsys IP blocks); it has been fully tested on STLinux platforms.
+(Synopsys IP blocks).
 
 Currently this network device driver is for all STM embedded MAC/GMAC
-(i.e. 7xxx/5xxx SoCs) and it's known working on other platforms i.e. ARM SPEAr.
+(i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
+FF1152AMT0221 D1215994A VIRTEX FPGA board.
 
-DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
-Universal version 4.0 have been used for developing the first code
-implementation.
+DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether MAC 10/100
+Universal version 4.0 have been used for developing this driver.
+
+This driver supports both the platform bus and PCI.
 
 Please, for more information also visit: www.stlinux.com
 
@@ -277,5 +279,5 @@
 
 6) TODO:
  o XGMAC is not supported.
- o Review the timer optimisation code to use an embedded device that will be
-  available in new chip generations.
+ o Add the EEE - Energy Efficient Ethernet
+ o Add the PTP - precision time protocol
diff --git a/Documentation/networking/team.txt b/Documentation/networking/team.txt
new file mode 100644
index 0000000..5a01368
--- /dev/null
+++ b/Documentation/networking/team.txt
@@ -0,0 +1,2 @@
+Team devices are driven from userspace via libteam library which is here:
+	https://github.com/jpirko/libteam
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index b04cb7d..150fd38 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -7,12 +7,9 @@
 
 - Multiplexing of pins, pads, fingers (etc) see below for details
 
-The intention is to also deal with:
-
-- Software-controlled biasing and driving mode specific pins, such as
-  pull-up/down, open drain etc, load capacitance configuration when controlled
-  by software, etc.
-
+- Configuration of pins, pads, fingers (etc), such as software-controlled
+  biasing and driving mode specific pins, such as pull-up/down, open drain,
+  load capacitance etc.
 
 Top-level interface
 ===================
@@ -32,7 +29,7 @@
   be sparse - i.e. there may be gaps in the space with numbers where no
   pin exists.
 
-When a PIN CONTROLLER is instatiated, it will register a descriptor to the
+When a PIN CONTROLLER is instantiated, it will register a descriptor to the
 pin control framework, and this descriptor contains an array of pin descriptors
 describing the pins handled by this specific pin controller.
 
@@ -61,14 +58,14 @@
 
 #include <linux/pinctrl/pinctrl.h>
 
-const struct pinctrl_pin_desc __refdata foo_pins[] = {
-      PINCTRL_PIN(0, "A1"),
-      PINCTRL_PIN(1, "A2"),
-      PINCTRL_PIN(2, "A3"),
+const struct pinctrl_pin_desc foo_pins[] = {
+      PINCTRL_PIN(0, "A8"),
+      PINCTRL_PIN(1, "B8"),
+      PINCTRL_PIN(2, "C8"),
       ...
-      PINCTRL_PIN(61, "H6"),
-      PINCTRL_PIN(62, "H7"),
-      PINCTRL_PIN(63, "H8"),
+      PINCTRL_PIN(61, "F1"),
+      PINCTRL_PIN(62, "G1"),
+      PINCTRL_PIN(63, "H1"),
 };
 
 static struct pinctrl_desc foo_desc = {
@@ -88,11 +85,16 @@
 		pr_err("could not register foo pin driver\n");
 }
 
+To enable the pinctrl subsystem and the subgroups for PINMUX and PINCONF and
+selected drivers, you need to select them from your machine's Kconfig entry,
+since these are so tightly integrated with the machines they are used on.
+See for example arch/arm/mach-u300/Kconfig for an example.
+
 Pins usually have fancier names than this. You can find these in the dataheet
 for your chip. Notice that the core pinctrl.h file provides a fancy macro
 called PINCTRL_PIN() to create the struct entries. As you can see I enumerated
-the pins from 0 in the upper left corner to 63 in the lower right corner,
-this enumeration was arbitrarily chosen, in practice you need to think
+the pins from 0 in the upper left corner to 63 in the lower right corner.
+This enumeration was arbitrarily chosen, in practice you need to think
 through your numbering system so that it matches the layout of registers
 and such things in your driver, or the code may become complicated. You must
 also consider matching of offsets to the GPIO ranges that may be handled by
@@ -133,8 +135,8 @@
 	const unsigned num_pins;
 };
 
-static unsigned int spi0_pins[] = { 0, 8, 16, 24 };
-static unsigned int i2c0_pins[] = { 24, 25 };
+static const unsigned int spi0_pins[] = { 0, 8, 16, 24 };
+static const unsigned int i2c0_pins[] = { 24, 25 };
 
 static const struct foo_group foo_groups[] = {
 	{
@@ -193,6 +195,88 @@
 and so on.
 
 
+Pin configuration
+=================
+
+Pins can sometimes be software-configured in an various ways, mostly related
+to their electronic properties when used as inputs or outputs. For example you
+may be able to make an output pin high impedance, or "tristate" meaning it is
+effectively disconnected. You may be able to connect an input pin to VDD or GND
+using a certain resistor value - pull up and pull down - so that the pin has a
+stable value when nothing is driving the rail it is connected to, or when it's
+unconnected.
+
+For example, a platform may do this:
+
+ret = pin_config_set("foo-dev", "FOO_GPIO_PIN", PLATFORM_X_PULL_UP);
+
+To pull up a pin to VDD. The pin configuration driver implements callbacks for
+changing pin configuration in the pin controller ops like this:
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include "platform_x_pindefs.h"
+
+static int foo_pin_config_get(struct pinctrl_dev *pctldev,
+		    unsigned offset,
+		    unsigned long *config)
+{
+	struct my_conftype conf;
+
+	... Find setting for pin @ offset ...
+
+	*config = (unsigned long) conf;
+}
+
+static int foo_pin_config_set(struct pinctrl_dev *pctldev,
+		    unsigned offset,
+		    unsigned long config)
+{
+	struct my_conftype *conf = (struct my_conftype *) config;
+
+	switch (conf) {
+		case PLATFORM_X_PULL_UP:
+		...
+		}
+	}
+}
+
+static int foo_pin_config_group_get (struct pinctrl_dev *pctldev,
+		    unsigned selector,
+		    unsigned long *config)
+{
+	...
+}
+
+static int foo_pin_config_group_set (struct pinctrl_dev *pctldev,
+		    unsigned selector,
+		    unsigned long config)
+{
+	...
+}
+
+static struct pinconf_ops foo_pconf_ops = {
+	.pin_config_get = foo_pin_config_get,
+	.pin_config_set = foo_pin_config_set,
+	.pin_config_group_get = foo_pin_config_group_get,
+	.pin_config_group_set = foo_pin_config_group_set,
+};
+
+/* Pin config operations are handled by some pin controller */
+static struct pinctrl_desc foo_desc = {
+	...
+	.confops = &foo_pconf_ops,
+};
+
+Since some controllers have special logic for handling entire groups of pins
+they can exploit the special whole-group pin control function. The
+pin_config_group_set() callback is allowed to return the error code -EAGAIN,
+for groups it does not want to handle, or if it just wants to do some
+group-level handling and then fall through to iterate over all pins, in which
+case each individual pin will be treated by separate pin_config_set() calls as
+well.
+
+
 Interaction with the GPIO subsystem
 ===================================
 
@@ -214,19 +298,20 @@
 	.name = "chip a",
 	.id = 0,
 	.base = 32,
+	.pin_base = 32,
 	.npins = 16,
 	.gc = &chip_a;
 };
 
-static struct pinctrl_gpio_range gpio_range_a = {
+static struct pinctrl_gpio_range gpio_range_b = {
 	.name = "chip b",
 	.id = 0,
 	.base = 48,
+	.pin_base = 64,
 	.npins = 8,
 	.gc = &chip_b;
 };
 
-
 {
 	struct pinctrl_dev *pctl;
 	...
@@ -235,42 +320,39 @@
 }
 
 So this complex system has one pin controller handling two different
-GPIO chips. Chip a has 16 pins and chip b has 8 pins. They are mapped in
-the global GPIO pin space at:
+GPIO chips. "chip a" has 16 pins and "chip b" has 8 pins. The "chip a" and
+"chip b" have different .pin_base, which means a start pin number of the
+GPIO range.
 
-chip a: [32 .. 47]
-chip b: [48 .. 55]
+The GPIO range of "chip a" starts from the GPIO base of 32 and actual
+pin range also starts from 32. However "chip b" has different starting
+offset for the GPIO range and pin range. The GPIO range of "chip b" starts
+from GPIO number 48, while the pin range of "chip b" starts from 64.
+
+We can convert a gpio number to actual pin number using this "pin_base".
+They are mapped in the global GPIO pin space at:
+
+chip a:
+ - GPIO range : [32 .. 47]
+ - pin range  : [32 .. 47]
+chip b:
+ - GPIO range : [48 .. 55]
+ - pin range  : [64 .. 71]
 
 When GPIO-specific functions in the pin control subsystem are called, these
-ranges will be used to look up the apropriate pin controller by inspecting
+ranges will be used to look up the appropriate pin controller by inspecting
 and matching the pin to the pin ranges across all controllers. When a
 pin controller handling the matching range is found, GPIO-specific functions
 will be called on that specific pin controller.
 
 For all functionalities dealing with pin biasing, pin muxing etc, the pin
 controller subsystem will subtract the range's .base offset from the passed
-in gpio pin number, and pass that on to the pin control driver, so the driver
-will get an offset into its handled number range. Further it is also passed
+in gpio number, and add the ranges's .pin_base offset to retrive a pin number.
+After that, the subsystem passes it on to the pin control driver, so the driver
+will get an pin number into its handled number range. Further it is also passed
 the range ID value, so that the pin controller knows which range it should
 deal with.
 
-For example: if a user issues pinctrl_gpio_set_foo(50), the pin control
-subsystem will find that the second range on this pin controller matches,
-subtract the base 48 and call the
-pinctrl_driver_gpio_set_foo(pinctrl, range, 2) where the latter function has
-this signature:
-
-int pinctrl_driver_gpio_set_foo(struct pinctrl_dev *pctldev,
-    struct pinctrl_gpio_range *rangeid,
-    unsigned offset);
-
-Now the driver knows that we want to do some GPIO-specific operation on the
-second GPIO range handled by "chip b", at offset 2 in that specific range.
-
-(If the GPIO subsystem is ever refactored to use a local per-GPIO controller
-pin space, this mapping will need to be augmented accordingly.)
-
-
 PINMUX interfaces
 =================
 
@@ -438,7 +520,7 @@
 
 Assumptions:
 
-We assume that the number possible function maps to pin groups is limited by
+We assume that the number of possible function maps to pin groups is limited by
 the hardware. I.e. we assume that there is no system where any function can be
 mapped to any pin, like in a phone exchange. So the available pins groups for
 a certain function will be limited to a few choices (say up to eight or so),
@@ -585,7 +667,7 @@
 
 const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector)
 {
-	return myfuncs[selector].name;
+	return foo_functions[selector].name;
 }
 
 static int foo_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
@@ -600,16 +682,16 @@
 int foo_enable(struct pinctrl_dev *pctldev, unsigned selector,
 		unsigned group)
 {
-	u8 regbit = (1 << group);
+	u8 regbit = (1 << selector + group);
 
 	writeb((readb(MUX)|regbit), MUX)
 	return 0;
 }
 
-int foo_disable(struct pinctrl_dev *pctldev, unsigned selector,
+void foo_disable(struct pinctrl_dev *pctldev, unsigned selector,
 		unsigned group)
 {
-	u8 regbit = (1 << group);
+	u8 regbit = (1 << selector + group);
 
 	writeb((readb(MUX) & ~(regbit)), MUX)
 	return 0;
@@ -647,6 +729,17 @@
 Pinmux interaction with the GPIO subsystem
 ==========================================
 
+The public pinmux API contains two functions named pinmux_request_gpio()
+and pinmux_free_gpio(). These two functions shall *ONLY* be called from
+gpiolib-based drivers as part of their gpio_request() and
+gpio_free() semantics. Likewise the pinmux_gpio_direction_[input|output]
+shall only be called from within respective gpio_direction_[input|output]
+gpiolib implementation.
+
+NOTE that platforms and individual drivers shall *NOT* request GPIO pins to be
+muxed in. Instead, implement a proper gpiolib driver and have that driver
+request proper muxing for its pins.
+
 The function list could become long, especially if you can convert every
 individual pin into a GPIO pin independent of any other pins, and then try
 the approach to define every pin as a function.
@@ -654,19 +747,24 @@
 In this case, the function array would become 64 entries for each GPIO
 setting and then the device functions.
 
-For this reason there is an additional function a pinmux driver can implement
-to enable only GPIO on an individual pin: .gpio_request_enable(). The same
-.free() function as for other functions is assumed to be usable also for
-GPIO pins.
+For this reason there are two functions a pinmux driver can implement
+to enable only GPIO on an individual pin: .gpio_request_enable() and
+.gpio_disable_free().
 
 This function will pass in the affected GPIO range identified by the pin
 controller core, so you know which GPIO pins are being affected by the request
 operation.
 
-Alternatively it is fully allowed to use named functions for each GPIO
-pin, the pinmux_request_gpio() will attempt to obtain the function "gpioN"
-where "N" is the global GPIO pin number if no special GPIO-handler is
-registered.
+If your driver needs to have an indication from the framework of whether the
+GPIO pin shall be used for input or output you can implement the
+.gpio_set_direction() function. As described this shall be called from the
+gpiolib driver and the affected GPIO range, pin offset and desired direction
+will be passed along to this function.
+
+Alternatively to using these special functions, it is fully allowed to use
+named functions for each GPIO pin, the pinmux_request_gpio() will attempt to
+obtain the function "gpioN" where "N" is the global GPIO pin number if no
+special GPIO-handler is registered.
 
 
 Pinmux board/machine configuration
@@ -683,19 +781,19 @@
 
 #include <linux/pinctrl/machine.h>
 
-static struct pinmux_map pmx_mapping[] = {
+static const struct pinmux_map __initdata pmx_mapping[] = {
 	{
-		.ctrl_dev_name = "pinctrl.0",
+		.ctrl_dev_name = "pinctrl-foo",
 		.function = "spi0",
 		.dev_name = "foo-spi.0",
 	},
 	{
-		.ctrl_dev_name = "pinctrl.0",
+		.ctrl_dev_name = "pinctrl-foo",
 		.function = "i2c0",
 		.dev_name = "foo-i2c.0",
 	},
 	{
-		.ctrl_dev_name = "pinctrl.0",
+		.ctrl_dev_name = "pinctrl-foo",
 		.function = "mmc0",
 		.dev_name = "foo-mmc.0",
 	},
@@ -714,14 +812,14 @@
 
 You register this pinmux mapping to the pinmux subsystem by simply:
 
-       ret = pinmux_register_mappings(&pmx_mapping, ARRAY_SIZE(pmx_mapping));
+       ret = pinmux_register_mappings(pmx_mapping, ARRAY_SIZE(pmx_mapping));
 
 Since the above construct is pretty common there is a helper macro to make
-it even more compact which assumes you want to use pinctrl.0 and position
+it even more compact which assumes you want to use pinctrl-foo and position
 0 for mapping, for example:
 
-static struct pinmux_map pmx_mapping[] = {
-       PINMUX_MAP_PRIMARY("I2CMAP", "i2c0", "foo-i2c.0"),
+static struct pinmux_map __initdata pmx_mapping[] = {
+       PINMUX_MAP("I2CMAP", "pinctrl-foo", "i2c0", "foo-i2c.0"),
 };
 
 
@@ -734,14 +832,14 @@
 ...
 {
 	.name = "spi0-pos-A",
-	.ctrl_dev_name = "pinctrl.0",
+	.ctrl_dev_name = "pinctrl-foo",
 	.function = "spi0",
 	.group = "spi0_0_grp",
 	.dev_name = "foo-spi.0",
 },
 {
 	.name = "spi0-pos-B",
-	.ctrl_dev_name = "pinctrl.0",
+	.ctrl_dev_name = "pinctrl-foo",
 	.function = "spi0",
 	.group = "spi0_1_grp",
 	.dev_name = "foo-spi.0",
@@ -759,47 +857,46 @@
 
 ...
 {
-	.name "2bit"
-	.ctrl_dev_name = "pinctrl.0",
-	.function = "mmc0",
-	.group = "mmc0_0_grp",
-	.dev_name = "foo-mmc.0",
-},
-{
-	.name "4bit"
-	.ctrl_dev_name = "pinctrl.0",
-	.function = "mmc0",
-	.group = "mmc0_0_grp",
-	.dev_name = "foo-mmc.0",
-},
-{
-	.name "4bit"
-	.ctrl_dev_name = "pinctrl.0",
+	.name = "2bit"
+	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
-	.ctrl_dev_name = "pinctrl.0",
-	.function = "mmc0",
-	.group = "mmc0_0_grp",
-	.dev_name = "foo-mmc.0",
-},
-{
-	.name "8bit"
-	.ctrl_dev_name = "pinctrl.0",
+	.name = "4bit"
+	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
-	.ctrl_dev_name = "pinctrl.0",
+	.name = "4bit"
+	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_2_grp",
 	.dev_name = "foo-mmc.0",
 },
+{
+	.name = "8bit"
+	.ctrl_dev_name = "pinctrl-foo",
+	.group = "mmc0_1_grp",
+	.dev_name = "foo-mmc.0",
+},
+{
+	.name = "8bit"
+	.ctrl_dev_name = "pinctrl-foo",
+	.function = "mmc0",
+	.group = "mmc0_2_grp",
+	.dev_name = "foo-mmc.0",
+},
+{
+	.name = "8bit"
+	.ctrl_dev_name = "pinctrl-foo",
+	.function = "mmc0",
+	.group = "mmc0_3_grp",
+	.dev_name = "foo-mmc.0",
+},
 ...
 
 The result of grabbing this mapping from the device with something like
@@ -897,8 +994,8 @@
 like this:
 
 {
-	.name "POWERMAP"
-	.ctrl_dev_name = "pinctrl.0",
+	.name = "POWERMAP"
+	.ctrl_dev_name = "pinctrl-foo",
 	.function = "power_func",
 	.hog_on_boot = true,
 },
@@ -927,7 +1024,7 @@
 
 foo_switch()
 {
-	struct pinmux pmx;
+	struct pinmux *pmx;
 
 	/* Enable on position A */
 	pmx = pinmux_get(&device, "spi0-pos-A");
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index 40a4c65..262acf5 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -15,7 +15,7 @@
 because some problems only show up on a second attempt at suspending and
 resuming the system.]  Moreover, hibernating in the "reboot" and "shutdown"
 modes causes the PM core to skip some platform-related callbacks which on ACPI
-systems might be necessary to make hibernation work.  Thus, if you machine fails
+systems might be necessary to make hibernation work.  Thus, if your machine fails
 to hibernate or resume in the "reboot" mode, you should try the "platform" mode:
 
 # echo platform > /sys/power/disk
diff --git a/Documentation/power/charger-manager.txt b/Documentation/power/charger-manager.txt
new file mode 100644
index 0000000..fdcca99
--- /dev/null
+++ b/Documentation/power/charger-manager.txt
@@ -0,0 +1,163 @@
+Charger Manager
+	(C) 2011 MyungJoo Ham <myungjoo.ham@samsung.com>, GPL
+
+Charger Manager provides in-kernel battery charger management that
+requires temperature monitoring during suspend-to-RAM state
+and where each battery may have multiple chargers attached and the userland
+wants to look at the aggregated information of the multiple chargers.
+
+Charger Manager is a platform_driver with power-supply-class entries.
+An instance of Charger Manager (a platform-device created with Charger-Manager)
+represents an independent battery with chargers. If there are multiple
+batteries with their own chargers acting independently in a system,
+the system may need multiple instances of Charger Manager.
+
+1. Introduction
+===============
+
+Charger Manager supports the following:
+
+* Support for multiple chargers (e.g., a device with USB, AC, and solar panels)
+	A system may have multiple chargers (or power sources) and some of
+	they may be activated at the same time. Each charger may have its
+	own power-supply-class and each power-supply-class can provide
+	different information about the battery status. This framework
+	aggregates charger-related information from multiple sources and
+	shows combined information as a single power-supply-class.
+
+* Support for in suspend-to-RAM polling (with suspend_again callback)
+	While the battery is being charged and the system is in suspend-to-RAM,
+	we may need to monitor the battery health by looking at the ambient or
+	battery temperature. We can accomplish this by waking up the system
+	periodically. However, such a method wakes up devices unncessary for
+	monitoring the battery health and tasks, and user processes that are
+	supposed to be kept suspended. That, in turn, incurs unnecessary power
+	consumption and slow down charging process. Or even, such peak power
+	consumption can stop chargers in the middle of charging
+	(external power input < device power consumption), which not
+	only affects the charging time, but the lifespan of the battery.
+
+	Charger Manager provides a function "cm_suspend_again" that can be
+	used as suspend_again callback of platform_suspend_ops. If the platform
+	requires tasks other than cm_suspend_again, it may implement its own
+	suspend_again callback that calls cm_suspend_again in the middle.
+	Normally, the platform will need to resume and suspend some devices
+	that are used by Charger Manager.
+
+2. Global Charger-Manager Data related with suspend_again
+========================================================
+In order to setup Charger Manager with suspend-again feature
+(in-suspend monitoring), the user should provide charger_global_desc
+with setup_charger_manager(struct charger_global_desc *).
+This charger_global_desc data for in-suspend monitoring is global
+as the name suggests. Thus, the user needs to provide only once even
+if there are multiple batteries. If there are multiple batteries, the
+multiple instances of Charger Manager share the same charger_global_desc
+and it will manage in-suspend monitoring for all instances of Charger Manager.
+
+The user needs to provide all the two entries properly in order to activate
+in-suspend monitoring:
+
+struct charger_global_desc {
+
+char *rtc_name;
+	: The name of rtc (e.g., "rtc0") used to wakeup the system from
+	suspend for Charger Manager. The alarm interrupt (AIE) of the rtc
+	should be able to wake up the system from suspend. Charger Manager
+	saves and restores the alarm value and use the previously-defined
+	alarm if it is going to go off earlier than Charger Manager so that
+	Charger Manager does not interfere with previously-defined alarms.
+
+bool (*rtc_only_wakeup)(void);
+	: This callback should let CM know whether
+	the wakeup-from-suspend is caused only by the alarm of "rtc" in the
+	same struct. If there is any other wakeup source triggered the
+	wakeup, it should return false. If the "rtc" is the only wakeup
+	reason, it should return true.
+};
+
+3. How to setup suspend_again
+=============================
+Charger Manager provides a function "extern bool cm_suspend_again(void)".
+When cm_suspend_again is called, it monitors every battery. The suspend_ops
+callback of the system's platform_suspend_ops can call cm_suspend_again
+function to know whether Charger Manager wants to suspend again or not.
+If there are no other devices or tasks that want to use suspend_again
+feature, the platform_suspend_ops may directly refer to cm_suspend_again
+for its suspend_again callback.
+
+The cm_suspend_again() returns true (meaning "I want to suspend again")
+if the system was woken up by Charger Manager and the polling
+(in-suspend monitoring) results in "normal".
+
+4. Charger-Manager Data (struct charger_desc)
+=============================================
+For each battery charged independently from other batteries (if a series of
+batteries are charged by a single charger, they are counted as one independent
+battery), an instance of Charger Manager is attached to it.
+
+struct charger_desc {
+
+char *psy_name;
+	: The power-supply-class name of the battery. Default is
+	"battery" if psy_name is NULL. Users can access the psy entries
+	at "/sys/class/power_supply/[psy_name]/".
+
+enum polling_modes polling_mode;
+	: CM_POLL_DISABLE: do not poll this battery.
+	  CM_POLL_ALWAYS: always poll this battery.
+	  CM_POLL_EXTERNAL_POWER_ONLY: poll this battery if and only if
+				       an external power source is attached.
+	  CM_POLL_CHARGING_ONLY: poll this battery if and only if the
+				 battery is being charged.
+
+unsigned int fullbatt_uV;
+	: If specified with a non-zero value, Charger Manager assumes
+	that the battery is full (capacity = 100) if the battery is not being
+	charged and the battery voltage is equal to or greater than
+	fullbatt_uV.
+
+unsigned int polling_interval_ms;
+	: Required polling interval in ms. Charger Manager will poll
+	this battery every polling_interval_ms or more frequently.
+
+enum data_source battery_present;
+	CM_FUEL_GAUGE: get battery presence information from fuel gauge.
+	CM_CHARGER_STAT: get battery presence from chargers.
+
+char **psy_charger_stat;
+	: An array ending with NULL that has power-supply-class names of
+	chargers. Each power-supply-class should provide "PRESENT" (if
+	battery_present is "CM_CHARGER_STAT"), "ONLINE" (shows whether an
+	external power source is attached or not), and "STATUS" (shows whether
+	the battery is {"FULL" or not FULL} or {"FULL", "Charging",
+	"Discharging", "NotCharging"}).
+
+int num_charger_regulators;
+struct regulator_bulk_data *charger_regulators;
+	: Regulators representing the chargers in the form for
+	regulator framework's bulk functions.
+
+char *psy_fuel_gauge;
+	: Power-supply-class name of the fuel gauge.
+
+int (*temperature_out_of_range)(int *mC);
+bool measure_battery_temp;
+	: This callback returns 0 if the temperature is safe for charging,
+	a positive number if it is too hot to charge, and a negative number
+	if it is too cold to charge. With the variable mC, the callback returns
+	the temperature in 1/1000 of centigrade.
+	The source of temperature can be battery or ambient one according to
+	the value of measure_battery_temp.
+};
+
+5. Other Considerations
+=======================
+
+At the charger/battery-related events such as battery-pulled-out,
+charger-pulled-out, charger-inserted, DCIN-over/under-voltage, charger-stopped,
+and others critical to chargers, the system should be configured to wake up.
+At least the following should wake up the system from a suspend:
+a) charger-on/off b) external-power-in/out c) battery-in/out (while charging)
+
+It is usually accomplished by configuring the PMIC as a wakeup source.
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 3139fb5..20af7de 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -126,7 +126,9 @@
 pointed to by the ops member of struct dev_pm_domain, or by the pm member of
 struct bus_type, struct device_type and struct class.  They are mostly of
 interest to the people writing infrastructure for platforms and buses, like PCI
-or USB, or device type and device class drivers.
+or USB, or device type and device class drivers.  They also are relevant to the
+writers of device drivers whose subsystems (PM domains, device types, device
+classes and bus types) don't provide all power management methods.
 
 Bus drivers implement these methods as appropriate for the hardware and the
 drivers using it; PCI works differently from USB, and so on.  Not many people
@@ -268,32 +270,35 @@
 unfrozen.  Furthermore, the *_noirq phases run at a time when IRQ handlers have
 been disabled (except for those marked with the IRQF_NO_SUSPEND flag).
 
-All phases use PM domain, bus, type, or class callbacks (that is, methods
-defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm).
-These callbacks are regarded by the PM core as mutually exclusive.  Moreover,
-PM domain callbacks always take precedence over bus, type and class callbacks,
-while type callbacks take precedence over bus and class callbacks, and class
-callbacks take precedence over bus callbacks.  To be precise, the following
-rules are used to determine which callback to execute in the given phase:
+All phases use PM domain, bus, type, class or driver callbacks (that is, methods
+defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, dev->class->pm or
+dev->driver->pm).  These callbacks are regarded by the PM core as mutually
+exclusive.  Moreover, PM domain callbacks always take precedence over all of the
+other callbacks and, for example, type callbacks take precedence over bus, class
+and driver callbacks.  To be precise, the following rules are used to determine
+which callback to execute in the given phase:
 
-    1.	If dev->pm_domain is present, the PM core will attempt to execute the
-	callback included in dev->pm_domain->ops.  If that callback is not
-	present, no action will be carried out for the given device.
+    1.	If dev->pm_domain is present, the PM core will choose the callback
+	included in dev->pm_domain->ops for execution
 
     2.	Otherwise, if both dev->type and dev->type->pm are present, the callback
-	included in dev->type->pm will be executed.
+	included in dev->type->pm will be chosen for execution.
 
     3.	Otherwise, if both dev->class and dev->class->pm are present, the
-	callback included in dev->class->pm will be executed.
+	callback included in dev->class->pm will be chosen for execution.
 
     4.	Otherwise, if both dev->bus and dev->bus->pm are present, the callback
-	included in dev->bus->pm will be executed.
+	included in dev->bus->pm will be chosen for execution.
 
 This allows PM domains and device types to override callbacks provided by bus
 types or device classes if necessary.
 
-These callbacks may in turn invoke device- or driver-specific methods stored in
-dev->driver->pm, but they don't have to.
+The PM domain, type, class and bus callbacks may in turn invoke device- or
+driver-specific methods stored in dev->driver->pm, but they don't have to do
+that.
+
+If the subsystem callback chosen for execution is not present, the PM core will
+execute the corresponding method from dev->driver->pm instead if there is one.
 
 
 Entering System Suspend
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt
index 316c2ba..ebd7490 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@@ -21,7 +21,7 @@
 try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and
 either wakes them up, if they are kernel threads, or sends fake signals to them,
 if they are user space processes.  A task that has TIF_FREEZE set, should react
-to it by calling the function called refrigerator() (defined in
+to it by calling the function called __refrigerator() (defined in
 kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
 to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
 Then, we say that the task is 'frozen' and therefore the set of functions
@@ -29,10 +29,10 @@
 defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
 User space processes are generally frozen before kernel threads.
 
-It is not recommended to call refrigerator() directly.  Instead, it is
-recommended to use the try_to_freeze() function (defined in
-include/linux/freezer.h), that checks the task's TIF_FREEZE flag and makes the
-task enter refrigerator() if the flag is set.
+__refrigerator() must not be called directly.  Instead, use the
+try_to_freeze() function (defined in include/linux/freezer.h), that checks
+the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the
+flag is set.
 
 For user space processes try_to_freeze() is called automatically from the
 signal-handling code, but the freezable kernel threads need to call it
@@ -61,13 +61,13 @@
 After the system memory state has been restored from a hibernation image and
 devices have been reinitialized, the function thaw_processes() is called in
 order to clear the PF_FROZEN flag for each frozen task.  Then, the tasks that
-have been frozen leave refrigerator() and continue running.
+have been frozen leave __refrigerator() and continue running.
 
 III. Which kernel threads are freezable?
 
 Kernel threads are not freezable by default.  However, a kernel thread may clear
 PF_NOFREEZE for itself by calling set_freezable() (the resetting of PF_NOFREEZE
-directly is strongly discouraged).  From this point it is regarded as freezable
+directly is not allowed).  From this point it is regarded as freezable
 and must call try_to_freeze() in a suitable place.
 
 IV. Why do we do that?
@@ -120,10 +120,10 @@
 freezing user threads I don't find really objectionable."
 
 Still, there are kernel threads that may want to be freezable.  For example, if
-a kernel that belongs to a device driver accesses the device directly, it in
-principle needs to know when the device is suspended, so that it doesn't try to
-access it at that time.  However, if the kernel thread is freezable, it will be
-frozen before the driver's .suspend() callback is executed and it will be
+a kernel thread that belongs to a device driver accesses the device directly, it
+in principle needs to know when the device is suspended, so that it doesn't try
+to access it at that time.  However, if the kernel thread is freezable, it will
+be frozen before the driver's .suspend() callback is executed and it will be
 thawed after the driver's .resume() callback has run, so it won't be accessing
 the device while it's suspended.
 
@@ -176,3 +176,28 @@
 A driver must have all firmwares it may need in RAM before suspend() is called.
 If keeping them is not practical, for example due to their size, they must be
 requested early enough using the suspend notifier API described in notifiers.txt.
+
+VI. Are there any precautions to be taken to prevent freezing failures?
+
+Yes, there are.
+
+First of all, grabbing the 'pm_mutex' lock to mutually exclude a piece of code
+from system-wide sleep such as suspend/hibernation is not encouraged.
+If possible, that piece of code must instead hook onto the suspend/hibernation
+notifiers to achieve mutual exclusion. Look at the CPU-Hotplug code
+(kernel/cpu.c) for an example.
+
+However, if that is not feasible, and grabbing 'pm_mutex' is deemed necessary,
+it is strongly discouraged to directly call mutex_[un]lock(&pm_mutex) since
+that could lead to freezing failures, because if the suspend/hibernate code
+successfully acquired the 'pm_mutex' lock, and hence that other entity failed
+to acquire the lock, then that task would get blocked in TASK_UNINTERRUPTIBLE
+state. As a consequence, the freezer would not be able to freeze that task,
+leading to freezing failure.
+
+However, the [un]lock_system_sleep() APIs are safe to use in this scenario,
+since they ask the freezer to skip freezing this task, since it is anyway
+"frozen enough" as it is blocked on 'pm_mutex', which will be released
+only after the entire suspend/hibernation sequence is complete.
+So, to summarize, use [un]lock_system_sleep() instead of directly using
+mutex_[un]lock(&pm_mutex). That would prevent freezing failures.
diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt
index 3f8b528..e272d99 100644
--- a/Documentation/power/regulator/regulator.txt
+++ b/Documentation/power/regulator/regulator.txt
@@ -12,7 +12,7 @@
 
 struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	struct device *dev, struct regulator_init_data *init_data,
-	void *driver_data);
+	void *driver_data, struct device_node *of_node);
 
 This will register the regulators capabilities and operations to the regulator
 core.
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index c2ae8bf..4abe83e 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -57,6 +57,10 @@
 
   4. Bus type of the device, if both dev->bus and dev->bus->pm are present.
 
+If the subsystem chosen by applying the above rules doesn't provide the relevant
+callback, the PM core will invoke the corresponding driver callback stored in
+dev->driver->pm directly (if present).
+
 The PM core always checks which callback to use in the order given above, so the
 priority order of callbacks from high to low is: PM domain, device type, class
 and bus type.  Moreover, the high-priority one will always take precedence over
@@ -64,86 +68,88 @@
 are referred to as subsystem-level callbacks in what follows.
 
 By default, the callbacks are always invoked in process context with interrupts
-enabled.  However, subsystems can use the pm_runtime_irq_safe() helper function
-to tell the PM core that their ->runtime_suspend(), ->runtime_resume() and
-->runtime_idle() callbacks may be invoked in atomic context with interrupts
-disabled for a given device.  This implies that the callback routines in
-question must not block or sleep, but it also means that the synchronous helper
-functions listed at the end of Section 4 may be used for that device within an
-interrupt handler or generally in an atomic context.
+enabled.  However, the pm_runtime_irq_safe() helper function can be used to tell
+the PM core that it is safe to run the ->runtime_suspend(), ->runtime_resume()
+and ->runtime_idle() callbacks for the given device in atomic context with
+interrupts disabled.  This implies that the callback routines in question must
+not block or sleep, but it also means that the synchronous helper functions
+listed at the end of Section 4 may be used for that device within an interrupt
+handler or generally in an atomic context.
 
-The subsystem-level suspend callback is _entirely_ _responsible_ for handling
-the suspend of the device as appropriate, which may, but need not include
-executing the device driver's own ->runtime_suspend() callback (from the
+The subsystem-level suspend callback, if present, is _entirely_ _responsible_
+for handling the suspend of the device as appropriate, which may, but need not
+include executing the device driver's own ->runtime_suspend() callback (from the
 PM core's point of view it is not necessary to implement a ->runtime_suspend()
 callback in a device driver as long as the subsystem-level suspend callback
 knows what to do to handle the device).
 
-  * Once the subsystem-level suspend callback has completed successfully
-    for given device, the PM core regards the device as suspended, which need
-    not mean that the device has been put into a low power state.  It is
-    supposed to mean, however, that the device will not process data and will
-    not communicate with the CPU(s) and RAM until the subsystem-level resume
-    callback is executed for it.  The runtime PM status of a device after
-    successful execution of the subsystem-level suspend callback is 'suspended'.
+  * Once the subsystem-level suspend callback (or the driver suspend callback,
+    if invoked directly) has completed successfully for the given device, the PM
+    core regards the device as suspended, which need not mean that it has been
+    put into a low power state.  It is supposed to mean, however, that the
+    device will not process data and will not communicate with the CPU(s) and
+    RAM until the appropriate resume callback is executed for it.  The runtime
+    PM status of a device after successful execution of the suspend callback is
+    'suspended'.
 
-  * If the subsystem-level suspend callback returns -EBUSY or -EAGAIN,
-    the device's runtime PM status is 'active', which means that the device
-    _must_ be fully operational afterwards.
+  * If the suspend callback returns -EBUSY or -EAGAIN, the device's runtime PM
+    status remains 'active', which means that the device _must_ be fully
+    operational afterwards.
 
-  * If the subsystem-level suspend callback returns an error code different
-    from -EBUSY or -EAGAIN, the PM core regards this as a fatal error and will
-    refuse to run the helper functions described in Section 4 for the device,
-    until the status of it is directly set either to 'active', or to 'suspended'
-    (the PM core provides special helper functions for this purpose).
+  * If the suspend callback returns an error code different from -EBUSY and
+    -EAGAIN, the PM core regards this as a fatal error and will refuse to run
+    the helper functions described in Section 4 for the device until its status
+    is directly set to  either'active', or 'suspended' (the PM core provides
+    special helper functions for this purpose).
 
-In particular, if the driver requires remote wake-up capability (i.e. hardware
+In particular, if the driver requires remote wakeup capability (i.e. hardware
 mechanism allowing the device to request a change of its power state, such as
 PCI PME) for proper functioning and device_run_wake() returns 'false' for the
 device, then ->runtime_suspend() should return -EBUSY.  On the other hand, if
-device_run_wake() returns 'true' for the device and the device is put into a low
-power state during the execution of the subsystem-level suspend callback, it is
-expected that remote wake-up will be enabled for the device.  Generally, remote
-wake-up should be enabled for all input devices put into a low power state at
-run time.
+device_run_wake() returns 'true' for the device and the device is put into a
+low-power state during the execution of the suspend callback, it is expected
+that remote wakeup will be enabled for the device.  Generally, remote wakeup
+should be enabled for all input devices put into low-power states at run time.
 
-The subsystem-level resume callback is _entirely_ _responsible_ for handling the
-resume of the device as appropriate, which may, but need not include executing
-the device driver's own ->runtime_resume() callback (from the PM core's point of
-view it is not necessary to implement a ->runtime_resume() callback in a device
-driver as long as the subsystem-level resume callback knows what to do to handle
-the device).
+The subsystem-level resume callback, if present, is _entirely_ _responsible_ for
+handling the resume of the device as appropriate, which may, but need not
+include executing the device driver's own ->runtime_resume() callback (from the
+PM core's point of view it is not necessary to implement a ->runtime_resume()
+callback in a device driver as long as the subsystem-level resume callback knows
+what to do to handle the device).
 
-  * Once the subsystem-level resume callback has completed successfully, the PM
-    core regards the device as fully operational, which means that the device
-    _must_ be able to complete I/O operations as needed.  The runtime PM status
-    of the device is then 'active'.
+  * Once the subsystem-level resume callback (or the driver resume callback, if
+    invoked directly) has completed successfully, the PM core regards the device
+    as fully operational, which means that the device _must_ be able to complete
+    I/O operations as needed.  The runtime PM status of the device is then
+    'active'.
 
-  * If the subsystem-level resume callback returns an error code, the PM core
-    regards this as a fatal error and will refuse to run the helper functions
-    described in Section 4 for the device, until its status is directly set
-    either to 'active' or to 'suspended' (the PM core provides special helper
-    functions for this purpose).
+  * If the resume callback returns an error code, the PM core regards this as a
+    fatal error and will refuse to run the helper functions described in Section
+    4 for the device, until its status is directly set to either 'active', or
+    'suspended' (by means of special helper functions provided by the PM core
+    for this purpose).
 
-The subsystem-level idle callback is executed by the PM core whenever the device
-appears to be idle, which is indicated to the PM core by two counters, the
-device's usage counter and the counter of 'active' children of the device.
+The idle callback (a subsystem-level one, if present, or the driver one) is
+executed by the PM core whenever the device appears to be idle, which is
+indicated to the PM core by two counters, the device's usage counter and the
+counter of 'active' children of the device.
 
   * If any of these counters is decreased using a helper function provided by
     the PM core and it turns out to be equal to zero, the other counter is
     checked.  If that counter also is equal to zero, the PM core executes the
-    subsystem-level idle callback with the device as an argument.
+    idle callback with the device as its argument.
 
-The action performed by a subsystem-level idle callback is totally dependent on
-the subsystem in question, but the expected and recommended action is to check
+The action performed by the idle callback is totally dependent on the subsystem
+(or driver) in question, but the expected and recommended action is to check
 if the device can be suspended (i.e. if all of the conditions necessary for
 suspending the device are satisfied) and to queue up a suspend request for the
 device in that case.  The value returned by this callback is ignored by the PM
 core.
 
 The helper functions provided by the PM core, described in Section 4, guarantee
-that the following constraints are met with respect to the bus type's runtime
-PM callbacks:
+that the following constraints are met with respect to runtime PM callbacks for
+one device:
 
 (1) The callbacks are mutually exclusive (e.g. it is forbidden to execute
     ->runtime_suspend() in parallel with ->runtime_resume() or with another
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index efe998b..462321c 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -41,7 +41,6 @@
 Debugging modules
 The proc file system
 Starting points for debugging scripting languages etc.
-Dumptool & Lcrash
 SysRq
 References
 Special Thanks
@@ -2455,39 +2454,6 @@
 
 
 
-Dumptool & Lcrash ( lkcd )
-==========================
-Michael Holzheu & others here at IBM have a fairly mature port of 
-SGI's lcrash tool which allows one to look at kernel structures in a
-running kernel.
-
-It also complements a tool called dumptool which dumps all the kernel's
-memory pages & registers to either a tape or a disk.
-This can be used by tech support or an ambitious end user do
-post mortem debugging of a machine like gdb core dumps.
-
-Going into how to use this tool in detail will be explained
-in other documentation supplied by IBM with the patches & the 
-lcrash homepage http://oss.sgi.com/projects/lkcd/ & the lcrash manpage.
-
-How they work
--------------
-Lcrash is a perfectly normal program,however, it requires 2 
-additional files, Kerntypes which is built using a patch to the 
-linux kernel sources in the linux root directory & the System.map.
-
-Kerntypes is an objectfile whose sole purpose in life
-is to provide stabs debug info to lcrash, to do this
-Kerntypes is built from kerntypes.c which just includes the most commonly
-referenced header files used when debugging, lcrash can then read the
-.stabs section of this file.
-
-Debugging a live system it uses /dev/mem
-alternatively for post mortem debugging it uses the data 
-collected by dumptool.
-
-
-
 SysRq
 =====
 This is now supported by linux for s/390 & z/Architecture.
diff --git a/Documentation/scsi/53c700.txt b/Documentation/scsi/53c700.txt
index 0da681d..e31aceb 100644
--- a/Documentation/scsi/53c700.txt
+++ b/Documentation/scsi/53c700.txt
@@ -16,32 +16,13 @@
 Compile Time Flags
 ==================
 
-The driver may be either io mapped or memory mapped.  This is
-selectable by configuration flags:
-
-CONFIG_53C700_MEM_MAPPED
-
-define if the driver is memory mapped.
-
-CONFIG_53C700_IO_MAPPED
-
-define if the driver is to be io mapped.
-
-One or other of the above flags *must* be defined.
-
-Other flags are:
+A compile time flag is:
 
 CONFIG_53C700_LE_ON_BE
 
 define if the chipset must be supported in little endian mode on a big
 endian architecture (used for the 700 on parisc).
 
-CONFIG_53C700_USE_CONSISTENT
-
-allocate consistent memory (should only be used if your architecture
-has a mixture of consistent and inconsistent memory).  Fully
-consistent or fully inconsistent architectures should not define this.
-
 
 Using the Chip Core Driver
 ==========================
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 64adb98..57566ba 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,13 @@
+Release Date    : Fri. Jan 6, 2012 17:00:00 PST 2010 -
+			(emaild-id:megaraidlinux@lsi.com)
+			Adam Radford
+Current Version : 00.00.06.14-rc1
+Old Version     : 00.00.06.12-rc1
+    1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380.
+    2. Mask off flags in ioctl path to prevent memory scribble with older
+       MegaCLI versions.
+    3. Remove poll_mode_io module paramater, sysfs node, and associated code.
+-------------------------------------------------------------------------------
 Release Date    : Wed. Oct 5, 2011 17:00:00 PST 2010 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Adam Radford
diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx
index 494980e..ab89959 100644
--- a/Documentation/scsi/LICENSE.qla4xxx
+++ b/Documentation/scsi/LICENSE.qla4xxx
@@ -1,32 +1,11 @@
 Copyright (c) 2003-2011 QLogic Corporation
-QLogic Linux iSCSI HBA Driver
+QLogic Linux iSCSI Driver
 
 This program includes a device driver for Linux 3.x.
 You may modify and redistribute the device driver code under the
 GNU General Public License (a copy of which is attached hereto as
 Exhibit A) published by the Free Software Foundation (version 2).
 
-REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
-THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
-EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
-CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
-OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
-TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
-ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
-COMBINATION WITH THIS PROGRAM.
-
 
 EXHIBIT A
 
diff --git a/Documentation/security/00-INDEX b/Documentation/security/00-INDEX
index 19bc494..99b85d3 100644
--- a/Documentation/security/00-INDEX
+++ b/Documentation/security/00-INDEX
@@ -1,5 +1,7 @@
 00-INDEX
 	- this file.
+LSM.txt
+	- description of the Linux Security Module framework.
 SELinux.txt
 	- how to get started with the SELinux security enhancement.
 Smack.txt
diff --git a/Documentation/security/LSM.txt b/Documentation/security/LSM.txt
new file mode 100644
index 0000000..c335a76
--- /dev/null
+++ b/Documentation/security/LSM.txt
@@ -0,0 +1,34 @@
+Linux Security Module framework
+-------------------------------
+
+The Linux Security Module (LSM) framework provides a mechanism for
+various security checks to be hooked by new kernel extensions. The name
+"module" is a bit of a misnomer since these extensions are not actually
+loadable kernel modules. Instead, they are selectable at build-time via
+CONFIG_DEFAULT_SECURITY and can be overridden at boot-time via the
+"security=..." kernel command line argument, in the case where multiple
+LSMs were built into a given kernel.
+
+The primary users of the LSM interface are Mandatory Access Control
+(MAC) extensions which provide a comprehensive security policy. Examples
+include SELinux, Smack, Tomoyo, and AppArmor. In addition to the larger
+MAC extensions, other extensions can be built using the LSM to provide
+specific changes to system operation when these tweaks are not available
+in the core functionality of Linux itself.
+
+Without a specific LSM built into the kernel, the default LSM will be the
+Linux capabilities system. Most LSMs choose to extend the capabilities
+system, building their checks on top of the defined capability hooks.
+For more details on capabilities, see capabilities(7) in the Linux
+man-pages project.
+
+Based on http://kerneltrap.org/Linux/Documenting_Security_Module_Intent,
+a new LSM is accepted into the kernel when its intent (a description of
+what it tries to protect against and in what cases one would expect to
+use it) has been appropriately documented in Documentation/security/.
+This allows an LSM's code to be easily compared to its goals, and so
+that end users and distros can make a more informed decision about which
+LSMs suit their requirements.
+
+For extensive documentation on the available LSM hook interfaces, please
+see include/linux/security.h.
diff --git a/Documentation/security/credentials.txt b/Documentation/security/credentials.txt
index fc0366c..8625705 100644
--- a/Documentation/security/credentials.txt
+++ b/Documentation/security/credentials.txt
@@ -221,10 +221,10 @@
  (5) LSM
 
      The Linux Security Module allows extra controls to be placed over the
-     operations that a task may do.  Currently Linux supports two main
-     alternate LSM options: SELinux and Smack.
+     operations that a task may do.  Currently Linux supports several LSM
+     options.
 
-     Both work by labelling the objects in a system and then applying sets of
+     Some work by labelling the objects in a system and then applying sets of
      rules (policies) that say what operations a task with one label may do to
      an object with another label.
 
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index 77ba0af..0a25a91 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -101,7 +101,7 @@
 	Returns the current state of modem control inputs.  The state
 	of the outputs should not be returned, since the core keeps
 	track of their state.  The state information should include:
-		- TIOCM_DCD	state of DCD signal
+		- TIOCM_CAR	state of DCD signal
 		- TIOCM_CTS	state of CTS signal
 		- TIOCM_DSR	state of DSR signal
 		- TIOCM_RI	state of RI signal
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index edad99a..c8c5454 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -42,19 +42,7 @@
 
 ALC262
 ======
-  fujitsu	Fujitsu Laptop
-  benq		Benq ED8
-  benq-t31	Benq T31
-  hippo		Hippo (ATI) with jack detection, Sony UX-90s
-  hippo_1	Hippo (Benq) with jack detection
-  toshiba-s06	Toshiba S06
-  toshiba-rx1	Toshiba RX1
-  tyan		Tyan Thunder n6650W (S2915-E)
-  ultra		Samsung Q1 Ultra Vista model
-  lenovo-3000	Lenovo 3000 y410
-  nec		NEC Versa S9100
-  basic		fixed pin assignment w/o SPDIF
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC267/268
 ==========
@@ -350,7 +338,6 @@
   mic-ref	Reference board with power management for ports
   dell-s14	Dell laptop
   dell-vostro-3500	Dell Vostro 3500 laptop
-  hp		HP laptops with (inverted) mute-LED
   hp-dv7-4000	HP dv-7 4000
   auto		BIOS setup (default)
 
diff --git a/Documentation/sound/alsa/compress_offload.txt b/Documentation/sound/alsa/compress_offload.txt
new file mode 100644
index 0000000..c83a835
--- /dev/null
+++ b/Documentation/sound/alsa/compress_offload.txt
@@ -0,0 +1,188 @@
+		compress_offload.txt
+		=====================
+	Pierre-Louis.Bossart <pierre-louis.bossart@linux.intel.com>
+		Vinod Koul <vinod.koul@linux.intel.com>
+
+Overview
+
+Since its early days, the ALSA API was defined with PCM support or
+constant bitrates payloads such as IEC61937 in mind. Arguments and
+returned values in frames are the norm, making it a challenge to
+extend the existing API to compressed data streams.
+
+In recent years, audio digital signal processors (DSP) were integrated
+in system-on-chip designs, and DSPs are also integrated in audio
+codecs. Processing compressed data on such DSPs results in a dramatic
+reduction of power consumption compared to host-based
+processing. Support for such hardware has not been very good in Linux,
+mostly because of a lack of a generic API available in the mainline
+kernel.
+
+Rather than requiring a compability break with an API change of the
+ALSA PCM interface, a new 'Compressed Data' API is introduced to
+provide a control and data-streaming interface for audio DSPs.
+
+The design of this API was inspired by the 2-year experience with the
+Intel Moorestown SOC, with many corrections required to upstream the
+API in the mainline kernel instead of the staging tree and make it
+usable by others.
+
+Requirements
+
+The main requirements are:
+
+- separation between byte counts and time. Compressed formats may have
+  a header per file, per frame, or no header at all. The payload size
+  may vary from frame-to-frame. As a result, it is not possible to
+  estimate reliably the duration of audio buffers when handling
+  compressed data. Dedicated mechanisms are required to allow for
+  reliable audio-video synchronization, which requires precise
+  reporting of the number of samples rendered at any given time.
+
+- Handling of multiple formats. PCM data only requires a specification
+  of the sampling rate, number of channels and bits per sample. In
+  contrast, compressed data comes in a variety of formats. Audio DSPs
+  may also provide support for a limited number of audio encoders and
+  decoders embedded in firmware, or may support more choices through
+  dynamic download of libraries.
+
+- Focus on main formats. This API provides support for the most
+  popular formats used for audio and video capture and playback. It is
+  likely that as audio compression technology advances, new formats
+  will be added.
+
+- Handling of multiple configurations. Even for a given format like
+  AAC, some implementations may support AAC multichannel but HE-AAC
+  stereo. Likewise WMA10 level M3 may require too much memory and cpu
+  cycles. The new API needs to provide a generic way of listing these
+  formats.
+
+- Rendering/Grabbing only. This API does not provide any means of
+  hardware acceleration, where PCM samples are provided back to
+  user-space for additional processing. This API focuses instead on
+  streaming compressed data to a DSP, with the assumption that the
+  decoded samples are routed to a physical output or logical back-end.
+
+ - Complexity hiding. Existing user-space multimedia frameworks all
+  have existing enums/structures for each compressed format. This new
+  API assumes the existence of a platform-specific compatibility layer
+  to expose, translate and make use of the capabilities of the audio
+  DSP, eg. Android HAL or PulseAudio sinks. By construction, regular
+  applications are not supposed to make use of this API.
+
+
+Design
+
+The new API shares a number of concepts with with the PCM API for flow
+control. Start, pause, resume, drain and stop commands have the same
+semantics no matter what the content is.
+
+The concept of memory ring buffer divided in a set of fragments is
+borrowed from the ALSA PCM API. However, only sizes in bytes can be
+specified.
+
+Seeks/trick modes are assumed to be handled by the host.
+
+The notion of rewinds/forwards is not supported. Data committed to the
+ring buffer cannot be invalidated, except when dropping all buffers.
+
+The Compressed Data API does not make any assumptions on how the data
+is transmitted to the audio DSP. DMA transfers from main memory to an
+embedded audio cluster or to a SPI interface for external DSPs are
+possible. As in the ALSA PCM case, a core set of routines is exposed;
+each driver implementer will have to write support for a set of
+mandatory routines and possibly make use of optional ones.
+
+The main additions are
+
+- get_caps
+This routine returns the list of audio formats supported. Querying the
+codecs on a capture stream will return encoders, decoders will be
+listed for playback streams.
+
+- get_codec_caps For each codec, this routine returns a list of
+capabilities. The intent is to make sure all the capabilities
+correspond to valid settings, and to minimize the risks of
+configuration failures. For example, for a complex codec such as AAC,
+the number of channels supported may depend on a specific profile. If
+the capabilities were exposed with a single descriptor, it may happen
+that a specific combination of profiles/channels/formats may not be
+supported. Likewise, embedded DSPs have limited memory and cpu cycles,
+it is likely that some implementations make the list of capabilities
+dynamic and dependent on existing workloads. In addition to codec
+settings, this routine returns the minimum buffer size handled by the
+implementation. This information can be a function of the DMA buffer
+sizes, the number of bytes required to synchronize, etc, and can be
+used by userspace to define how much needs to be written in the ring
+buffer before playback can start.
+
+- set_params
+This routine sets the configuration chosen for a specific codec. The
+most important field in the parameters is the codec type; in most
+cases decoders will ignore other fields, while encoders will strictly
+comply to the settings
+
+- get_params
+This routines returns the actual settings used by the DSP. Changes to
+the settings should remain the exception.
+
+- get_timestamp
+The timestamp becomes a multiple field structure. It lists the number
+of bytes transferred, the number of samples processed and the number
+of samples rendered/grabbed. All these values can be used to determine
+the avarage bitrate, figure out if the ring buffer needs to be
+refilled or the delay due to decoding/encoding/io on the DSP.
+
+Note that the list of codecs/profiles/modes was derived from the
+OpenMAX AL specification instead of reinventing the wheel.
+Modifications include:
+- Addition of FLAC and IEC formats
+- Merge of encoder/decoder capabilities
+- Profiles/modes listed as bitmasks to make descriptors more compact
+- Addition of set_params for decoders (missing in OpenMAX AL)
+- Addition of AMR/AMR-WB encoding modes (missing in OpenMAX AL)
+- Addition of format information for WMA
+- Addition of encoding options when required (derived from OpenMAX IL)
+- Addition of rateControlSupported (missing in OpenMAX AL)
+
+Not supported:
+
+- Support for VoIP/circuit-switched calls is not the target of this
+  API. Support for dynamic bit-rate changes would require a tight
+  coupling between the DSP and the host stack, limiting power savings.
+
+- Packet-loss concealment is not supported. This would require an
+  additional interface to let the decoder synthesize data when frames
+  are lost during transmission. This may be added in the future.
+
+- Volume control/routing is not handled by this API. Devices exposing a
+  compressed data interface will be considered as regular ALSA devices;
+  volume changes and routing information will be provided with regular
+  ALSA kcontrols.
+
+- Embedded audio effects. Such effects should be enabled in the same
+  manner, no matter if the input was PCM or compressed.
+
+- multichannel IEC encoding. Unclear if this is required.
+
+- Encoding/decoding acceleration is not supported as mentioned
+  above. It is possible to route the output of a decoder to a capture
+  stream, or even implement transcoding capabilities. This routing
+  would be enabled with ALSA kcontrols.
+
+- Audio policy/resource management. This API does not provide any
+  hooks to query the utilization of the audio DSP, nor any premption
+  mechanisms.
+
+- No notion of underun/overrun. Since the bytes written are compressed
+  in nature and data written/read doesn't translate directly to
+  rendered output in time, this does not deal with underrun/overun and
+  maybe dealt in user-library
+
+Credits:
+- Mark Brown and Liam Girdwood for discussions on the need for this API
+- Harsha Priya for her work on intel_sst compressed API
+- Rakesh Ughreja for valuable feedback
+- Sing Nallasellan, Sikkandar Madar and Prasanna Samaga for
+  demonstrating and quantifying the benefits of audio offload on a
+  real platform.
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index 21fd05c..f0ab5cf 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -25,7 +25,8 @@
 
  - Send the patch, after verifying that it follows the above rules, to
    stable@vger.kernel.org.  You must note the upstream commit ID in the
-   changelog of your submission.
+   changelog of your submission, as well as the kernel version you wish
+   it to be applied to.
  - To have the patch automatically included in the stable tree, add the tag
      Cc: stable@vger.kernel.org
    in the sign-off area. Once the patch is merged it will be applied to
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 1f24636..8c20fbd 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -49,6 +49,7 @@
 - panic
 - panic_on_oops
 - panic_on_unrecovered_nmi
+- panic_on_stackoverflow
 - pid_max
 - powersave-nap               [ PPC only ]
 - printk
@@ -393,6 +394,19 @@
 
 ==============================================================
 
+panic_on_stackoverflow:
+
+Controls the kernel's behavior when detecting the overflows of
+kernel, IRQ and exception stacks except a user stack.
+This file shows up if CONFIG_DEBUG_STACKOVERFLOW is enabled.
+
+0: try to continue operation.
+
+1: panic immediately.
+
+==============================================================
+
+
 pid_max:
 
 PID allocation wrap value.  When the kernel's next PID value
@@ -401,6 +415,14 @@
 
 ==============================================================
 
+ns_last_pid:
+
+The last pid allocated in the current (the one task using this sysctl
+lives in) pid namespace. When selecting a pid for a next task on fork
+kernel tries to allocate a number starting from this one.
+
+==============================================================
+
 powersave-nap: (PPC only)
 
 If set, Linux-PPC will use the 'nap' mode of powersaving,
diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py
index 7ef9b84..6e21b8b 100755
--- a/Documentation/target/tcm_mod_builder.py
+++ b/Documentation/target/tcm_mod_builder.py
@@ -230,14 +230,9 @@
 	buf += "#include <linux/ctype.h>\n"
 	buf += "#include <asm/unaligned.h>\n\n"
 	buf += "#include <target/target_core_base.h>\n"
-	buf += "#include <target/target_core_transport.h>\n"
-	buf += "#include <target/target_core_fabric_ops.h>\n"
+	buf += "#include <target/target_core_fabric.h>\n"
 	buf += "#include <target/target_core_fabric_configfs.h>\n"
-	buf += "#include <target/target_core_fabric_lib.h>\n"
-	buf += "#include <target/target_core_device.h>\n"
-	buf += "#include <target/target_core_tpg.h>\n"
 	buf += "#include <target/target_core_configfs.h>\n"
-	buf += "#include <target/target_core_base.h>\n"
 	buf += "#include <target/configfs_macros.h>\n\n"
 	buf += "#include \"" + fabric_mod_name + "_base.h\"\n"
 	buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n"
@@ -260,7 +255,7 @@
 	buf += "	/* " + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n"
 	buf += "		return ERR_PTR(-EINVAL); */\n"
 	buf += "	se_nacl_new = " + fabric_mod_name + "_alloc_fabric_acl(se_tpg);\n"
-	buf += "	if (!(se_nacl_new))\n"
+	buf += "	if (!se_nacl_new)\n"
 	buf += "		return ERR_PTR(-ENOMEM);\n"
 	buf += "//#warning FIXME: Hardcoded nexus depth in " + fabric_mod_name + "_make_nodeacl()\n"
 	buf += "	nexus_depth = 1;\n"
@@ -308,7 +303,7 @@
 	buf += "	if (strict_strtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX)\n"
 	buf += "		return ERR_PTR(-EINVAL);\n\n"
 	buf += "	tpg = kzalloc(sizeof(struct " + fabric_mod_name + "_tpg), GFP_KERNEL);\n"
-	buf += "	if (!(tpg)) {\n"
+	buf += "	if (!tpg) {\n"
 	buf += "		printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_tpg\");\n"
 	buf += "		return ERR_PTR(-ENOMEM);\n"
 	buf += "	}\n"
@@ -344,7 +339,7 @@
 	buf += "	/* if (" + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n"
 	buf += "		return ERR_PTR(-EINVAL); */\n\n"
 	buf += "	" + fabric_mod_port + " = kzalloc(sizeof(struct " + fabric_mod_name + "_" + fabric_mod_port + "), GFP_KERNEL);\n"
-	buf += "	if (!(" + fabric_mod_port + ")) {\n"
+	buf += "	if (!" + fabric_mod_port + ") {\n"
 	buf += "		printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_" + fabric_mod_port + "\");\n"
 	buf += "		return ERR_PTR(-ENOMEM);\n"
 	buf += "	}\n"
@@ -352,7 +347,7 @@
 	if proto_ident == "FC" or proto_ident == "SAS":
 		buf += "	" + fabric_mod_port + "->" + fabric_mod_port + "_wwpn = wwpn;\n"
 
-	buf += "	/* " + fabric_mod_name + "_format_wwn(&" + fabric_mod_port + "->" + fabric_mod_port + "_name[0], " + fabric_mod_name.upper() + "__NAMELEN, wwpn); */\n\n"
+	buf += "	/* " + fabric_mod_name + "_format_wwn(&" + fabric_mod_port + "->" + fabric_mod_port + "_name[0], " + fabric_mod_name.upper() + "_NAMELEN, wwpn); */\n\n"
 	buf += "	return &" + fabric_mod_port + "->" + fabric_mod_port + "_wwn;\n"
 	buf += "}\n\n"
 	buf += "static void " + fabric_mod_name + "_drop_" + fabric_mod_port + "(struct se_wwn *wwn)\n"
@@ -391,8 +386,7 @@
 	buf += "	.tpg_alloc_fabric_acl		= " + fabric_mod_name + "_alloc_fabric_acl,\n"
 	buf += "	.tpg_release_fabric_acl		= " + fabric_mod_name + "_release_fabric_acl,\n"
 	buf += "	.tpg_get_inst_index		= " + fabric_mod_name + "_tpg_get_inst_index,\n"
-	buf += "	.release_cmd_to_pool		= " + fabric_mod_name + "_release_cmd,\n"
-	buf += "	.release_cmd_direct		= " + fabric_mod_name + "_release_cmd,\n"
+	buf += "	.release_cmd			= " + fabric_mod_name + "_release_cmd,\n"
 	buf += "	.shutdown_session		= " + fabric_mod_name + "_shutdown_session,\n"
 	buf += "	.close_session			= " + fabric_mod_name + "_close_session,\n"
 	buf += "	.stop_session			= " + fabric_mod_name + "_stop_session,\n"
@@ -405,14 +399,12 @@
 	buf += "	.set_default_node_attributes	= " + fabric_mod_name + "_set_default_node_attrs,\n"
 	buf += "	.get_task_tag			= " + fabric_mod_name + "_get_task_tag,\n"
 	buf += "	.get_cmd_state			= " + fabric_mod_name + "_get_cmd_state,\n"
-	buf += "	.new_cmd_failure		= " + fabric_mod_name + "_new_cmd_failure,\n"
 	buf += "	.queue_data_in			= " + fabric_mod_name + "_queue_data_in,\n"
 	buf += "	.queue_status			= " + fabric_mod_name + "_queue_status,\n"
 	buf += "	.queue_tm_rsp			= " + fabric_mod_name + "_queue_tm_rsp,\n"
 	buf += "	.get_fabric_sense_len		= " + fabric_mod_name + "_get_fabric_sense_len,\n"
 	buf += "	.set_fabric_sense_len		= " + fabric_mod_name + "_set_fabric_sense_len,\n"
 	buf += "	.is_state_remove		= " + fabric_mod_name + "_is_state_remove,\n"
-	buf += "	.pack_lun			= " + fabric_mod_name + "_pack_lun,\n"
 	buf += "	/*\n"
 	buf += "	 * Setup function pointers for generic logic in target_core_fabric_configfs.c\n"
 	buf += "	 */\n"
@@ -439,9 +431,9 @@
 	buf += "	 * Register the top level struct config_item_type with TCM core\n"
 	buf += "	 */\n"
 	buf += "	fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name[4:] + "\");\n"
-	buf += "	if (!(fabric)) {\n"
+	buf += "	if (IS_ERR(fabric)) {\n"
 	buf += "		printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n"
-	buf += "		return -ENOMEM;\n"
+	buf += "		return PTR_ERR(fabric);\n"
 	buf += "	}\n"
 	buf += "	/*\n"
 	buf += "	 * Setup fabric->tf_ops from our local " + fabric_mod_name + "_ops\n"
@@ -475,9 +467,9 @@
 	buf += "	printk(KERN_INFO \"" +  fabric_mod_name.upper() + "[0] - Set fabric -> " + fabric_mod_name + "_fabric_configfs\\n\");\n"
 	buf += "	return 0;\n"
 	buf += "};\n\n"
-	buf += "static void " + fabric_mod_name + "_deregister_configfs(void)\n"
+	buf += "static void __exit " + fabric_mod_name + "_deregister_configfs(void)\n"
 	buf += "{\n"
-	buf += "	if (!(" + fabric_mod_name + "_fabric_configfs))\n"
+	buf += "	if (!" + fabric_mod_name + "_fabric_configfs)\n"
 	buf += "		return;\n\n"
 	buf += "	target_fabric_configfs_deregister(" + fabric_mod_name + "_fabric_configfs);\n"
 	buf += "	" + fabric_mod_name + "_fabric_configfs = NULL;\n"
@@ -492,17 +484,15 @@
 	buf += "		return ret;\n\n"
 	buf += "	return 0;\n"
 	buf += "};\n\n"
-	buf += "static void " + fabric_mod_name + "_exit(void)\n"
+	buf += "static void __exit " + fabric_mod_name + "_exit(void)\n"
 	buf += "{\n"
 	buf += "	" + fabric_mod_name + "_deregister_configfs();\n"
 	buf += "};\n\n"
 
-	buf += "#ifdef MODULE\n"
 	buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n"
 	buf += "MODULE_LICENSE(\"GPL\");\n"
 	buf += "module_init(" + fabric_mod_name + "_init);\n"
 	buf += "module_exit(" + fabric_mod_name + "_exit);\n"
-	buf += "#endif\n"
 
 	ret = p.write(buf)
 	if ret:
@@ -514,7 +504,7 @@
 
 def tcm_mod_scan_fabric_ops(tcm_dir):
 
-	fabric_ops_api = tcm_dir + "include/target/target_core_fabric_ops.h"
+	fabric_ops_api = tcm_dir + "include/target/target_core_fabric.h"
 
 	print "Using tcm_mod_scan_fabric_ops: " + fabric_ops_api
 	process_fo = 0;
@@ -579,11 +569,7 @@
 	buf += "#include <scsi/scsi_cmnd.h>\n"
 	buf += "#include <scsi/libfc.h>\n\n"
 	buf += "#include <target/target_core_base.h>\n"
-	buf += "#include <target/target_core_transport.h>\n"
-	buf += "#include <target/target_core_fabric_ops.h>\n"
-	buf += "#include <target/target_core_fabric_lib.h>\n"
-	buf += "#include <target/target_core_device.h>\n"
-	buf += "#include <target/target_core_tpg.h>\n"
+	buf += "#include <target/target_core_fabric.h>\n"
 	buf += "#include <target/target_core_configfs.h>\n\n"
 	buf += "#include \"" + fabric_mod_name + "_base.h\"\n"
 	buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n"
@@ -788,7 +774,7 @@
 			buf += "{\n"
 			buf += "	struct " + fabric_mod_name + "_nacl *nacl;\n\n"
 			buf += "	nacl = kzalloc(sizeof(struct " + fabric_mod_name + "_nacl), GFP_KERNEL);\n"
-			buf += "	if (!(nacl)) {\n"
+			buf += "	if (!nacl) {\n"
 			buf += "		printk(KERN_ERR \"Unable to alocate struct " + fabric_mod_name + "_nacl\\n\");\n"
 			buf += "		return NULL;\n"
 			buf += "	}\n\n"
@@ -815,7 +801,7 @@
 			buf += "}\n\n"
 			bufi += "u32 " + fabric_mod_name + "_tpg_get_inst_index(struct se_portal_group *);\n"
 
-		if re.search('release_cmd_to_pool', fo):
+		if re.search('\*release_cmd\)\(', fo):
 			buf += "void " + fabric_mod_name + "_release_cmd(struct se_cmd *se_cmd)\n"
 			buf += "{\n"
 			buf += "	return;\n"
@@ -899,13 +885,6 @@
 			buf += "}\n\n"
 			bufi += "int " + fabric_mod_name + "_get_cmd_state(struct se_cmd *);\n"
 
-		if re.search('new_cmd_failure\)\(', fo):
-			buf += "void " + fabric_mod_name + "_new_cmd_failure(struct se_cmd *se_cmd)\n"
-			buf += "{\n"
-			buf += "	return;\n"
-			buf += "}\n\n"
-			bufi += "void " + fabric_mod_name + "_new_cmd_failure(struct se_cmd *);\n"
-
 		if re.search('queue_data_in\)\(', fo):
 			buf += "int " + fabric_mod_name + "_queue_data_in(struct se_cmd *se_cmd)\n"
 			buf += "{\n"
@@ -948,15 +927,6 @@
 			buf += "}\n\n"
 			bufi += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *);\n"
 
-		if re.search('pack_lun\)\(', fo):
-			buf += "u64 " + fabric_mod_name + "_pack_lun(unsigned int lun)\n"
-			buf += "{\n"
-			buf += "	WARN_ON(lun >= 256);\n"
-			buf += "	/* Caller wants this byte-swapped */\n"
-			buf += "	return cpu_to_le64((lun & 0xff) << 8);\n"
-			buf += "}\n\n"
-			bufi += "u64 " + fabric_mod_name + "_pack_lun(unsigned int);\n"
-
 
 	ret = p.write(buf)
 	if ret:
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index b61e46f..1733ab9 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -284,7 +284,7 @@
 The framework includes a simple notification mechanism, in the form of a
 netlink event. Netlink socket initialization is done during the _init_
 of the framework. Drivers which intend to use the notification mechanism
-just need to call generate_netlink_event() with two arguments viz
+just need to call thermal_generate_netlink_event() with two arguments viz
 (originator, event). Typically the originator will be an integer assigned
 to a thermal_zone_device when it registers itself with the framework. The
 event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL,
diff --git a/Documentation/trace/events-kmem.txt b/Documentation/trace/events-kmem.txt
index aa82ee4..1948004 100644
--- a/Documentation/trace/events-kmem.txt
+++ b/Documentation/trace/events-kmem.txt
@@ -40,8 +40,8 @@
 ==================
 mm_page_alloc		  page=%p pfn=%lu order=%d migratetype=%d gfp_flags=%s
 mm_page_alloc_zone_locked page=%p pfn=%lu order=%u migratetype=%d cpu=%d percpu_refill=%d
-mm_page_free_direct	  page=%p pfn=%lu order=%d
-mm_pagevec_free		  page=%p pfn=%lu order=%d cold=%d
+mm_page_free		  page=%p pfn=%lu order=%d
+mm_page_free_batched	  page=%p pfn=%lu order=%d cold=%d
 
 These four events deal with page allocation and freeing. mm_page_alloc is
 a simple indicator of page allocator activity. Pages may be allocated from
@@ -53,13 +53,13 @@
 impairs performance by disabling interrupts, dirtying cache lines between
 CPUs and serialising many CPUs.
 
-When a page is freed directly by the caller, the mm_page_free_direct event
+When a page is freed directly by the caller, the only mm_page_free event
 is triggered. Significant amounts of activity here could indicate that the
 callers should be batching their activities.
 
-When pages are freed using a pagevec, the mm_pagevec_free is
-triggered. Broadly speaking, pages are taken off the LRU lock in bulk and
-freed in batch with a pagevec. Significant amounts of activity here could
+When pages are freed in batch, the also mm_page_free_batched is triggered.
+Broadly speaking, pages are taken off the LRU lock in bulk and
+freed in batch with a page list. Significant amounts of activity here could
 indicate that the system is under memory pressure and can also indicate
 contention on the zone->lru_lock.
 
diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
index b510564..bb24c2a 100644
--- a/Documentation/trace/events.txt
+++ b/Documentation/trace/events.txt
@@ -191,8 +191,6 @@
 
 Currently, only exact string matches are supported.
 
-Currently, the maximum number of predicates in a filter is 16.
-
 5.2 Setting filters
 -------------------
 
diff --git a/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl b/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
index 7df50e8..0a120aa 100644
--- a/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
+++ b/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
@@ -17,8 +17,8 @@
 
 # Tracepoint events
 use constant MM_PAGE_ALLOC		=> 1;
-use constant MM_PAGE_FREE_DIRECT 	=> 2;
-use constant MM_PAGEVEC_FREE		=> 3;
+use constant MM_PAGE_FREE		=> 2;
+use constant MM_PAGE_FREE_BATCHED	=> 3;
 use constant MM_PAGE_PCPU_DRAIN		=> 4;
 use constant MM_PAGE_ALLOC_ZONE_LOCKED	=> 5;
 use constant MM_PAGE_ALLOC_EXTFRAG	=> 6;
@@ -223,10 +223,10 @@
 		# Perl Switch() sucks majorly
 		if ($tracepoint eq "mm_page_alloc") {
 			$perprocesspid{$process_pid}->{MM_PAGE_ALLOC}++;
-		} elsif ($tracepoint eq "mm_page_free_direct") {
-			$perprocesspid{$process_pid}->{MM_PAGE_FREE_DIRECT}++;
-		} elsif ($tracepoint eq "mm_pagevec_free") {
-			$perprocesspid{$process_pid}->{MM_PAGEVEC_FREE}++;
+		} elsif ($tracepoint eq "mm_page_free") {
+			$perprocesspid{$process_pid}->{MM_PAGE_FREE}++
+		} elsif ($tracepoint eq "mm_page_free_batched") {
+			$perprocesspid{$process_pid}->{MM_PAGE_FREE_BATCHED}++;
 		} elsif ($tracepoint eq "mm_page_pcpu_drain") {
 			$perprocesspid{$process_pid}->{MM_PAGE_PCPU_DRAIN}++;
 			$perprocesspid{$process_pid}->{STATE_PCPU_PAGES_DRAINED}++;
@@ -336,8 +336,8 @@
 			$process_pid,
 			$stats{$process_pid}->{MM_PAGE_ALLOC},
 			$stats{$process_pid}->{MM_PAGE_ALLOC_ZONE_LOCKED},
-			$stats{$process_pid}->{MM_PAGE_FREE_DIRECT},
-			$stats{$process_pid}->{MM_PAGEVEC_FREE},
+			$stats{$process_pid}->{MM_PAGE_FREE},
+			$stats{$process_pid}->{MM_PAGE_FREE_BATCHED},
 			$stats{$process_pid}->{MM_PAGE_PCPU_DRAIN},
 			$stats{$process_pid}->{HIGH_PCPU_DRAINS},
 			$stats{$process_pid}->{HIGH_PCPU_REFILLS},
@@ -364,8 +364,8 @@
 
 		$perprocess{$process}->{MM_PAGE_ALLOC} += $perprocesspid{$process_pid}->{MM_PAGE_ALLOC};
 		$perprocess{$process}->{MM_PAGE_ALLOC_ZONE_LOCKED} += $perprocesspid{$process_pid}->{MM_PAGE_ALLOC_ZONE_LOCKED};
-		$perprocess{$process}->{MM_PAGE_FREE_DIRECT} += $perprocesspid{$process_pid}->{MM_PAGE_FREE_DIRECT};
-		$perprocess{$process}->{MM_PAGEVEC_FREE} += $perprocesspid{$process_pid}->{MM_PAGEVEC_FREE};
+		$perprocess{$process}->{MM_PAGE_FREE} += $perprocesspid{$process_pid}->{MM_PAGE_FREE};
+		$perprocess{$process}->{MM_PAGE_FREE_BATCHED} += $perprocesspid{$process_pid}->{MM_PAGE_FREE_BATCHED};
 		$perprocess{$process}->{MM_PAGE_PCPU_DRAIN} += $perprocesspid{$process_pid}->{MM_PAGE_PCPU_DRAIN};
 		$perprocess{$process}->{HIGH_PCPU_DRAINS} += $perprocesspid{$process_pid}->{HIGH_PCPU_DRAINS};
 		$perprocess{$process}->{HIGH_PCPU_REFILLS} += $perprocesspid{$process_pid}->{HIGH_PCPU_REFILLS};
diff --git a/Documentation/trace/tracepoint-analysis.txt b/Documentation/trace/tracepoint-analysis.txt
index 87bee3c..058cc6c 100644
--- a/Documentation/trace/tracepoint-analysis.txt
+++ b/Documentation/trace/tracepoint-analysis.txt
@@ -93,14 +93,14 @@
 for a duration of time can be examined.
 
  $ perf stat -a \
-	-e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
-	-e kmem:mm_pagevec_free \
+	-e kmem:mm_page_alloc -e kmem:mm_page_free \
+	-e kmem:mm_page_free_batched \
 	sleep 10
  Performance counter stats for 'sleep 10':
 
            9630  kmem:mm_page_alloc
-           2143  kmem:mm_page_free_direct
-           7424  kmem:mm_pagevec_free
+           2143  kmem:mm_page_free
+           7424  kmem:mm_page_free_batched
 
    10.002577764  seconds time elapsed
 
@@ -119,15 +119,15 @@
 Events can be activated and tracked for the duration of a process on a local
 basis using PCL such as follows.
 
-  $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
-		 -e kmem:mm_pagevec_free ./hackbench 10
+  $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free \
+		 -e kmem:mm_page_free_batched ./hackbench 10
   Time: 0.909
 
     Performance counter stats for './hackbench 10':
 
           17803  kmem:mm_page_alloc
-          12398  kmem:mm_page_free_direct
-           4827  kmem:mm_pagevec_free
+          12398  kmem:mm_page_free
+           4827  kmem:mm_page_free_batched
 
     0.973913387  seconds time elapsed
 
@@ -146,8 +146,8 @@
 performance analyst to do it by hand. In the event that the discrete event
 occurrences are useful to the performance analyst, then perf can be used.
 
-  $ perf stat --repeat 5 -e kmem:mm_page_alloc -e kmem:mm_page_free_direct
-			-e kmem:mm_pagevec_free ./hackbench 10
+  $ perf stat --repeat 5 -e kmem:mm_page_alloc -e kmem:mm_page_free
+			-e kmem:mm_page_free_batched ./hackbench 10
   Time: 0.890
   Time: 0.895
   Time: 0.915
@@ -157,8 +157,8 @@
    Performance counter stats for './hackbench 10' (5 runs):
 
           16630  kmem:mm_page_alloc         ( +-   3.542% )
-          11486  kmem:mm_page_free_direct   ( +-   4.771% )
-           4730  kmem:mm_pagevec_free       ( +-   2.325% )
+          11486  kmem:mm_page_free	    ( +-   4.771% )
+           4730  kmem:mm_page_free_batched  ( +-   2.325% )
 
     0.982653002  seconds time elapsed   ( +-   1.448% )
 
@@ -168,15 +168,15 @@
 Using --repeat, it is also possible to view how events are fluctuating over
 time on a system-wide basis using -a and sleep.
 
-  $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
-		-e kmem:mm_pagevec_free \
+  $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free \
+		-e kmem:mm_page_free_batched \
 		-a --repeat 10 \
 		sleep 1
   Performance counter stats for 'sleep 1' (10 runs):
 
            1066  kmem:mm_page_alloc         ( +-  26.148% )
-            182  kmem:mm_page_free_direct   ( +-   5.464% )
-            890  kmem:mm_pagevec_free       ( +-  30.079% )
+            182  kmem:mm_page_free          ( +-   5.464% )
+            890  kmem:mm_page_free_batched  ( +-  30.079% )
 
     1.002251757  seconds time elapsed   ( +-   0.005% )
 
@@ -220,8 +220,8 @@
 data must be recorded. At the time of writing, this required root:
 
   $ perf record -c 1 \
-	-e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
-	-e kmem:mm_pagevec_free \
+	-e kmem:mm_page_alloc -e kmem:mm_page_free \
+	-e kmem:mm_page_free_batched \
 	./hackbench 10
   Time: 0.894
   [ perf record: Captured and wrote 0.733 MB perf.data (~32010 samples) ]
@@ -260,8 +260,8 @@
 at it:
 
   $ perf record -c 1 -f \
-		-e kmem:mm_page_alloc -e kmem:mm_page_free_direct \
-		-e kmem:mm_pagevec_free \
+		-e kmem:mm_page_alloc -e kmem:mm_page_free \
+		-e kmem:mm_page_free_batched \
 		-p `pidof X`
 
 This was interrupted after a few seconds and
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index a4efa04..5335fa8 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -47,10 +47,11 @@
 
 2. Find which bus connects to the desired device
 
-Run "cat /proc/bus/usb/devices", and find the T-line which corresponds to
-the device. Usually you do it by looking for the vendor string. If you have
-many similar devices, unplug one and compare two /proc/bus/usb/devices outputs.
-The T-line will have a bus number. Example:
+Run "cat /sys/kernel/debug/usb/devices", and find the T-line which corresponds
+to the device. Usually you do it by looking for the vendor string. If you have
+many similar devices, unplug one and compare the two
+/sys/kernel/debug/usb/devices outputs. The T-line will have a bus number.
+Example:
 
 T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
 D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
@@ -58,7 +59,10 @@
 S:  Manufacturer=ATEN
 S:  Product=UC100KM V2.00
 
-Bus=03 means it's bus 3.
+"Bus=03" means it's bus 3. Alternatively, you can look at the output from
+"lsusb" and get the bus number from the appropriate line. Example:
+
+Bus 003 Device 002: ID 0557:2004 ATEN UC100KM V2.00
 
 3. Start 'cat'
 
diff --git a/Documentation/vgaarbiter.txt b/Documentation/vgaarbiter.txt
index b7d401e..014423e 100644
--- a/Documentation/vgaarbiter.txt
+++ b/Documentation/vgaarbiter.txt
@@ -177,7 +177,7 @@
 
 Benjamin Herrenschmidt (IBM?) started this work when he discussed such design
 with the Xorg community in 2005 [1, 2]. In the end of 2007, Paulo Zanoni and
-Tiago Vignatti (both of C3SL/Federal University of Paraná) proceeded his work
+Tiago Vignatti (both of C3SL/Federal University of Paraná) proceeded his work
 enhancing the kernel code to adapt as a kernel module and also did the
 implementation of the user space side [3]. Now (2009) Tiago Vignatti and Dave
 Airlie finally put this work in shape and queued to Jesse Barnes' PCI tree.
diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index d5cb4ea..7b59e95 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -1,5 +1,5 @@
   0 -> Unknown board                            (au0828)
-  1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200,2040:7210,2040:7217,2040:721b,2040:721e,2040:721f,2040:7280,0fd9:0008]
+  1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200,2040:7210,2040:7217,2040:721b,2040:721e,2040:721f,2040:7280,0fd9:0008,2040:7260,2040:7213]
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
   4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]
diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv
index 4739d56..b753906 100644
--- a/Documentation/video4linux/CARDLIST.bttv
+++ b/Documentation/video4linux/CARDLIST.bttv
@@ -71,7 +71,7 @@
  70 -> Prolink Pixelview PV-BT878P+ (Rev.4C,8E)
  71 -> Lifeview FlyVideo 98EZ (capture only) LR51          [1851:1851]
  72 -> Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [1554:4011]
- 73 -> Sensoray 311                                        [6000:0311]
+ 73 -> Sensoray 311/611                                    [6000:0311,6000:0611]
  74 -> RemoteVision MX (RV605)
  75 -> Powercolor MTV878/ MTV878R/ MTV878F
  76 -> Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) [0e11:0079]
@@ -158,3 +158,4 @@
 157 -> Geovision GV-800(S) (master)                        [800a:763d]
 158 -> Geovision GV-800(S) (slave)                         [800b:763d,800c:763d,800d:763d]
 159 -> ProVideo PV183                                      [1830:1540,1831:1540,1832:1540,1833:1540,1834:1540,1835:1540,1836:1540,1837:1540]
+160 -> Tongwei Video Technology TD-3116                    [f200:3116]
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 8910449..23584d0 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -29,3 +29,6 @@
  28 -> LEADTEK WinFast PxTV1200                            [107d:6f22]
  29 -> GoTView X5 3D Hybrid                                [5654:2390]
  30 -> NetUP Dual DVB-T/C-CI RF                            [1b55:e2e4]
+ 31 -> Leadtek Winfast PxDVR3200 H XC4000                  [107d:6f39]
+ 32 -> MPX-885
+ 33 -> Mygica X8507                                        [14f1:8502]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index d9c0f11..eee18e6 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -85,3 +85,5 @@
  84 -> Samsung SMT 7020 DVB-S                              [18ac:dc00,18ac:dccd]
  85 -> Twinhan VP-1027 DVB-S                               [1822:0023]
  86 -> TeVii S464 DVB-S/S2                                 [d464:9022]
+ 87 -> Leadtek WinFast DTV2000 H PLUS                      [107d:6f42]
+ 88 -> Leadtek WinFast DTV1800 H (XC4000)                  [107d:6f38]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 4a7b3df..e7be3ac 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -11,7 +11,7 @@
  10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
  11 -> Terratec Hybrid XS                       (em2880)
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
- 13 -> Terratec Prodigy XS                      (em2880)        [0ccd:0047]
+ 13 -> Terratec Prodigy XS                      (em2880)
  14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
  15 -> V-Gear PocketTV                          (em2800)
  16 -> Hauppauge WinTV HVR 950                  (em2883)        [2040:6513,2040:6517,2040:651b]
@@ -40,7 +40,7 @@
  39 -> KWorld PVRTV 300U                        (em2861)        [eb1a:e300]
  40 -> Plextor ConvertX PX-TV100U               (em2861)        [093b:a005]
  41 -> Kworld 350 U DVB-T                       (em2870)        [eb1a:e350]
- 42 -> Kworld 355 U DVB-T                       (em2870)        [eb1a:e355,eb1a:e357]
+ 42 -> Kworld 355 U DVB-T                       (em2870)        [eb1a:e355,eb1a:e357,eb1a:e359]
  43 -> Terratec Cinergy T XS                    (em2870)        [0ccd:0043]
  44 -> Terratec Cinergy T XS (MT2060)           (em2870)
  45 -> Pinnacle PCTV DVB-T                      (em2870)
@@ -64,7 +64,7 @@
  64 -> Easy Cap Capture DC-60                   (em2860)
  65 -> IO-DATA GV-MVP/SZ                        (em2820/em2840) [04bb:0515]
  66 -> Empire dual TV                           (em2880)
- 67 -> Terratec Grabby                          (em2860)        [0ccd:0096]
+ 67 -> Terratec Grabby                          (em2860)        [0ccd:0096,0ccd:10AF]
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
@@ -76,3 +76,7 @@
  76 -> KWorld PlusTV 340U or UB435-Q (ATSC)     (em2870)        [1b80:a340]
  77 -> EM2874 Leadership ISDBT                  (em2874)
  78 -> PCTV nanoStick T2 290e                   (em28174)
+ 79 -> Terratec Cinergy H5                      (em2884)        [0ccd:10a2,0ccd:10ad]
+ 80 -> PCTV DVB-S2 Stick (460e)                 (em28174)
+ 81 -> Hauppauge WinTV HVR 930C                 (em2884)        [2040:1605]
+ 82 -> Terratec Cinergy HTC Stick               (em2884)        [0ccd:00b2]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 7efae9b..e7ef38a 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -186,3 +186,4 @@
 185 -> MagicPro ProHDTV Pro2 DMB-TH/Hybrid      [17de:d136]
 186 -> Beholder BeholdTV 501                    [5ace:5010]
 187 -> Beholder BeholdTV 503 FM                 [5ace:5030]
+188 -> Sensoray 811/911                         [6000:0811,6000:0911]
diff --git a/Documentation/video4linux/CARDLIST.saa7164 b/Documentation/video4linux/CARDLIST.saa7164
index 152bd7b..2205e8d 100644
--- a/Documentation/video4linux/CARDLIST.saa7164
+++ b/Documentation/video4linux/CARDLIST.saa7164
@@ -7,3 +7,5 @@
   6 -> Hauppauge WinTV-HVR2200                             [0070:8901]
   7 -> Hauppauge WinTV-HVR2250                             [0070:8891,0070:8851]
   8 -> Hauppauge WinTV-HVR2250                             [0070:88A1]
+  9 -> Hauppauge WinTV-HVR2200                             [0070:8940]
+ 10 -> Hauppauge WinTV-HVR2200                             [0070:8953]
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index b15e29f..f2060f0d 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -189,6 +189,7 @@
 ov519		05a9:0518	Creative WebCam
 ov519		05a9:0519	OV519 Microphone
 ov519		05a9:0530	OmniVision
+ov534_9		05a9:1550	OmniVision VEHO Filmscanner
 ov519		05a9:2800	OmniVision SuperCAM
 ov519		05a9:4519	Webcam Classic
 ov534_9		05a9:8065	OmniVision test kit ov538+ov9712
@@ -278,6 +279,7 @@
 pac7302		093a:2629	Genious iSlim 300
 pac7302		093a:262a	Webcam 300k
 pac7302		093a:262c	Philips SPC 230 NC
+jl2005bcd	0979:0227	Various brands, 19 known cameras supported
 jeilinj		0979:0280	Sakar 57379
 jeilinj		0979:0280	Sportscam DV15
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt
index 26aa057..e2492a9 100644
--- a/Documentation/video4linux/v4l2-controls.txt
+++ b/Documentation/video4linux/v4l2-controls.txt
@@ -666,27 +666,6 @@
 class is added.
 
 
-Differences from the Spec
-=========================
-
-There are a few places where the framework acts slightly differently from the
-V4L2 Specification. Those differences are described in this section. We will
-have to see whether we need to adjust the spec or not.
-
-1) It is no longer required to have all controls contained in a
-v4l2_ext_control array be from the same control class. The framework will be
-able to handle any type of control in the array. You need to set ctrl_class
-to 0 in order to enable this. If ctrl_class is non-zero, then it will still
-check that all controls belong to that control class.
-
-If you set ctrl_class to 0 and count to 0, then it will only return an error
-if there are no controls at all.
-
-2) Clarified the way error_idx works. For get and set it will be equal to
-count if nothing was done yet. If it is less than count then only the controls
-up to error_idx-1 were successfully applied.
-
-
 Proposals for Extensions
 ========================
 
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index f8dcabf..659b2ba 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -612,6 +612,12 @@
 will be either a top-level mutex or a mutex per device node. If you want
 finer-grained locking then you have to set it to NULL and do you own locking.
 
+It is up to the driver developer to decide which method to use. However, if
+your driver has high-latency operations (for example, changing the exposure
+of a USB webcam might take a long time), then you might be better off with
+doing your own locking if you want to allow the user to do other things with
+the device while waiting for the high-latency command to finish.
+
 If a lock is specified then all file operations will be serialized on that
 lock. If you use videobuf then you must pass the same lock to the videobuf
 queue initialize function: if videobuf has to wait for a frame to arrive, then
@@ -619,6 +625,11 @@
 also waits in the code, then you should do the same to allow other processes
 to access the device node while the first process is waiting for something.
 
+In the case of videobuf2 you will need to implement the wait_prepare and
+wait_finish callbacks to unlock/lock if applicable. In particular, if you use
+the lock in struct video_device then you must unlock/lock this mutex in
+wait_prepare and wait_finish.
+
 The implementation of a hotplug disconnect should also take the lock before
 calling v4l2_device_disconnect.
 
diff --git a/Documentation/virtual/00-INDEX b/Documentation/virtual/00-INDEX
index 8e60199..924bd46 100644
--- a/Documentation/virtual/00-INDEX
+++ b/Documentation/virtual/00-INDEX
@@ -4,8 +4,6 @@
 	- this file.
 kvm/
 	- Kernel Virtual Machine.  See also http://linux-kvm.org
-lguest/
-	- Extremely simple hypervisor for experimental/educational use.
 uml/
 	- User Mode Linux, builds/runs Linux kernel as a userspace program.
 virtio.txt
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index e2a4b52..e1d94bf 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1466,6 +1466,31 @@
 an RMA, or 1 if the processor can use an RMA but doesn't require it,
 because it supports the Virtual RMA (VRMA) facility.
 
+4.64 KVM_NMI
+
+Capability: KVM_CAP_USER_NMI
+Architectures: x86
+Type: vcpu ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+
+Queues an NMI on the thread's vcpu.  Note this is well defined only
+when KVM_CREATE_IRQCHIP has not been called, since this is an interface
+between the virtual cpu core and virtual local APIC.  After KVM_CREATE_IRQCHIP
+has been called, this interface is completely emulated within the kernel.
+
+To use this to emulate the LINT1 input with KVM_CREATE_IRQCHIP, use the
+following algorithm:
+
+  - pause the vpcu
+  - read the local APIC's state (KVM_GET_LAPIC)
+  - check whether changing LINT1 will queue an NMI (see the LVT entry for LINT1)
+  - if so, issue KVM_NMI
+  - resume the vcpu
+
+Some guests configure the LINT1 NMI input to cause a panic, aiding in
+debugging.
+
 5. The kvm_run structure
 
 Application code obtains a pointer to the kvm_run structure by
diff --git a/Documentation/virtual/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c
deleted file mode 100644
index c095d79..0000000
--- a/Documentation/virtual/lguest/lguest.c
+++ /dev/null
@@ -1,2065 +0,0 @@
-/*P:100
- * This is the Launcher code, a simple program which lays out the "physical"
- * memory for the new Guest by mapping the kernel image and the virtual
- * devices, then opens /dev/lguest to tell the kernel about the Guest and
- * control it.
-:*/
-#define _LARGEFILE64_SOURCE
-#define _GNU_SOURCE
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <err.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <elf.h>
-#include <sys/mman.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/wait.h>
-#include <sys/eventfd.h>
-#include <fcntl.h>
-#include <stdbool.h>
-#include <errno.h>
-#include <ctype.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <sys/time.h>
-#include <time.h>
-#include <netinet/in.h>
-#include <net/if.h>
-#include <linux/sockios.h>
-#include <linux/if_tun.h>
-#include <sys/uio.h>
-#include <termios.h>
-#include <getopt.h>
-#include <assert.h>
-#include <sched.h>
-#include <limits.h>
-#include <stddef.h>
-#include <signal.h>
-#include <pwd.h>
-#include <grp.h>
-
-#include <linux/virtio_config.h>
-#include <linux/virtio_net.h>
-#include <linux/virtio_blk.h>
-#include <linux/virtio_console.h>
-#include <linux/virtio_rng.h>
-#include <linux/virtio_ring.h>
-#include <asm/bootparam.h>
-#include "../../../include/linux/lguest_launcher.h"
-/*L:110
- * We can ignore the 43 include files we need for this program, but I do want
- * to draw attention to the use of kernel-style types.
- *
- * As Linus said, "C is a Spartan language, and so should your naming be."  I
- * like these abbreviations, so we define them here.  Note that u64 is always
- * unsigned long long, which works on all Linux systems: this means that we can
- * use %llu in printf for any u64.
- */
-typedef unsigned long long u64;
-typedef uint32_t u32;
-typedef uint16_t u16;
-typedef uint8_t u8;
-/*:*/
-
-#define BRIDGE_PFX "bridge:"
-#ifndef SIOCBRADDIF
-#define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
-#endif
-/* We can have up to 256 pages for devices. */
-#define DEVICE_PAGES 256
-/* This will occupy 3 pages: it must be a power of 2. */
-#define VIRTQUEUE_NUM 256
-
-/*L:120
- * verbose is both a global flag and a macro.  The C preprocessor allows
- * this, and although I wouldn't recommend it, it works quite nicely here.
- */
-static bool verbose;
-#define verbose(args...) \
-	do { if (verbose) printf(args); } while(0)
-/*:*/
-
-/* The pointer to the start of guest memory. */
-static void *guest_base;
-/* The maximum guest physical address allowed, and maximum possible. */
-static unsigned long guest_limit, guest_max;
-/* The /dev/lguest file descriptor. */
-static int lguest_fd;
-
-/* a per-cpu variable indicating whose vcpu is currently running */
-static unsigned int __thread cpu_id;
-
-/* This is our list of devices. */
-struct device_list {
-	/* Counter to assign interrupt numbers. */
-	unsigned int next_irq;
-
-	/* Counter to print out convenient device numbers. */
-	unsigned int device_num;
-
-	/* The descriptor page for the devices. */
-	u8 *descpage;
-
-	/* A single linked list of devices. */
-	struct device *dev;
-	/* And a pointer to the last device for easy append. */
-	struct device *lastdev;
-};
-
-/* The list of Guest devices, based on command line arguments. */
-static struct device_list devices;
-
-/* The device structure describes a single device. */
-struct device {
-	/* The linked-list pointer. */
-	struct device *next;
-
-	/* The device's descriptor, as mapped into the Guest. */
-	struct lguest_device_desc *desc;
-
-	/* We can't trust desc values once Guest has booted: we use these. */
-	unsigned int feature_len;
-	unsigned int num_vq;
-
-	/* The name of this device, for --verbose. */
-	const char *name;
-
-	/* Any queues attached to this device */
-	struct virtqueue *vq;
-
-	/* Is it operational */
-	bool running;
-
-	/* Device-specific data. */
-	void *priv;
-};
-
-/* The virtqueue structure describes a queue attached to a device. */
-struct virtqueue {
-	struct virtqueue *next;
-
-	/* Which device owns me. */
-	struct device *dev;
-
-	/* The configuration for this queue. */
-	struct lguest_vqconfig config;
-
-	/* The actual ring of buffers. */
-	struct vring vring;
-
-	/* Last available index we saw. */
-	u16 last_avail_idx;
-
-	/* How many are used since we sent last irq? */
-	unsigned int pending_used;
-
-	/* Eventfd where Guest notifications arrive. */
-	int eventfd;
-
-	/* Function for the thread which is servicing this virtqueue. */
-	void (*service)(struct virtqueue *vq);
-	pid_t thread;
-};
-
-/* Remember the arguments to the program so we can "reboot" */
-static char **main_args;
-
-/* The original tty settings to restore on exit. */
-static struct termios orig_term;
-
-/*
- * We have to be careful with barriers: our devices are all run in separate
- * threads and so we need to make sure that changes visible to the Guest happen
- * in precise order.
- */
-#define wmb() __asm__ __volatile__("" : : : "memory")
-#define mb() __asm__ __volatile__("" : : : "memory")
-
-/*
- * Convert an iovec element to the given type.
- *
- * This is a fairly ugly trick: we need to know the size of the type and
- * alignment requirement to check the pointer is kosher.  It's also nice to
- * have the name of the type in case we report failure.
- *
- * Typing those three things all the time is cumbersome and error prone, so we
- * have a macro which sets them all up and passes to the real function.
- */
-#define convert(iov, type) \
-	((type *)_convert((iov), sizeof(type), __alignof__(type), #type))
-
-static void *_convert(struct iovec *iov, size_t size, size_t align,
-		      const char *name)
-{
-	if (iov->iov_len != size)
-		errx(1, "Bad iovec size %zu for %s", iov->iov_len, name);
-	if ((unsigned long)iov->iov_base % align != 0)
-		errx(1, "Bad alignment %p for %s", iov->iov_base, name);
-	return iov->iov_base;
-}
-
-/* Wrapper for the last available index.  Makes it easier to change. */
-#define lg_last_avail(vq)	((vq)->last_avail_idx)
-
-/*
- * The virtio configuration space is defined to be little-endian.  x86 is
- * little-endian too, but it's nice to be explicit so we have these helpers.
- */
-#define cpu_to_le16(v16) (v16)
-#define cpu_to_le32(v32) (v32)
-#define cpu_to_le64(v64) (v64)
-#define le16_to_cpu(v16) (v16)
-#define le32_to_cpu(v32) (v32)
-#define le64_to_cpu(v64) (v64)
-
-/* Is this iovec empty? */
-static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
-{
-	unsigned int i;
-
-	for (i = 0; i < num_iov; i++)
-		if (iov[i].iov_len)
-			return false;
-	return true;
-}
-
-/* Take len bytes from the front of this iovec. */
-static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len)
-{
-	unsigned int i;
-
-	for (i = 0; i < num_iov; i++) {
-		unsigned int used;
-
-		used = iov[i].iov_len < len ? iov[i].iov_len : len;
-		iov[i].iov_base += used;
-		iov[i].iov_len -= used;
-		len -= used;
-	}
-	assert(len == 0);
-}
-
-/* The device virtqueue descriptors are followed by feature bitmasks. */
-static u8 *get_feature_bits(struct device *dev)
-{
-	return (u8 *)(dev->desc + 1)
-		+ dev->num_vq * sizeof(struct lguest_vqconfig);
-}
-
-/*L:100
- * The Launcher code itself takes us out into userspace, that scary place where
- * pointers run wild and free!  Unfortunately, like most userspace programs,
- * it's quite boring (which is why everyone likes to hack on the kernel!).
- * Perhaps if you make up an Lguest Drinking Game at this point, it will get
- * you through this section.  Or, maybe not.
- *
- * The Launcher sets up a big chunk of memory to be the Guest's "physical"
- * memory and stores it in "guest_base".  In other words, Guest physical ==
- * Launcher virtual with an offset.
- *
- * This can be tough to get your head around, but usually it just means that we
- * use these trivial conversion functions when the Guest gives us its
- * "physical" addresses:
- */
-static void *from_guest_phys(unsigned long addr)
-{
-	return guest_base + addr;
-}
-
-static unsigned long to_guest_phys(const void *addr)
-{
-	return (addr - guest_base);
-}
-
-/*L:130
- * Loading the Kernel.
- *
- * We start with couple of simple helper routines.  open_or_die() avoids
- * error-checking code cluttering the callers:
- */
-static int open_or_die(const char *name, int flags)
-{
-	int fd = open(name, flags);
-	if (fd < 0)
-		err(1, "Failed to open %s", name);
-	return fd;
-}
-
-/* map_zeroed_pages() takes a number of pages. */
-static void *map_zeroed_pages(unsigned int num)
-{
-	int fd = open_or_die("/dev/zero", O_RDONLY);
-	void *addr;
-
-	/*
-	 * We use a private mapping (ie. if we write to the page, it will be
-	 * copied). We allocate an extra two pages PROT_NONE to act as guard
-	 * pages against read/write attempts that exceed allocated space.
-	 */
-	addr = mmap(NULL, getpagesize() * (num+2),
-		    PROT_NONE, MAP_PRIVATE, fd, 0);
-
-	if (addr == MAP_FAILED)
-		err(1, "Mmapping %u pages of /dev/zero", num);
-
-	if (mprotect(addr + getpagesize(), getpagesize() * num,
-		     PROT_READ|PROT_WRITE) == -1)
-		err(1, "mprotect rw %u pages failed", num);
-
-	/*
-	 * One neat mmap feature is that you can close the fd, and it
-	 * stays mapped.
-	 */
-	close(fd);
-
-	/* Return address after PROT_NONE page */
-	return addr + getpagesize();
-}
-
-/* Get some more pages for a device. */
-static void *get_pages(unsigned int num)
-{
-	void *addr = from_guest_phys(guest_limit);
-
-	guest_limit += num * getpagesize();
-	if (guest_limit > guest_max)
-		errx(1, "Not enough memory for devices");
-	return addr;
-}
-
-/*
- * This routine is used to load the kernel or initrd.  It tries mmap, but if
- * that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
- * it falls back to reading the memory in.
- */
-static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
-{
-	ssize_t r;
-
-	/*
-	 * We map writable even though for some segments are marked read-only.
-	 * The kernel really wants to be writable: it patches its own
-	 * instructions.
-	 *
-	 * MAP_PRIVATE means that the page won't be copied until a write is
-	 * done to it.  This allows us to share untouched memory between
-	 * Guests.
-	 */
-	if (mmap(addr, len, PROT_READ|PROT_WRITE,
-		 MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
-		return;
-
-	/* pread does a seek and a read in one shot: saves a few lines. */
-	r = pread(fd, addr, len, offset);
-	if (r != len)
-		err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
-}
-
-/*
- * This routine takes an open vmlinux image, which is in ELF, and maps it into
- * the Guest memory.  ELF = Embedded Linking Format, which is the format used
- * by all modern binaries on Linux including the kernel.
- *
- * The ELF headers give *two* addresses: a physical address, and a virtual
- * address.  We use the physical address; the Guest will map itself to the
- * virtual address.
- *
- * We return the starting address.
- */
-static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
-{
-	Elf32_Phdr phdr[ehdr->e_phnum];
-	unsigned int i;
-
-	/*
-	 * Sanity checks on the main ELF header: an x86 executable with a
-	 * reasonable number of correctly-sized program headers.
-	 */
-	if (ehdr->e_type != ET_EXEC
-	    || ehdr->e_machine != EM_386
-	    || ehdr->e_phentsize != sizeof(Elf32_Phdr)
-	    || ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
-		errx(1, "Malformed elf header");
-
-	/*
-	 * An ELF executable contains an ELF header and a number of "program"
-	 * headers which indicate which parts ("segments") of the program to
-	 * load where.
-	 */
-
-	/* We read in all the program headers at once: */
-	if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
-		err(1, "Seeking to program headers");
-	if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
-		err(1, "Reading program headers");
-
-	/*
-	 * Try all the headers: there are usually only three.  A read-only one,
-	 * a read-write one, and a "note" section which we don't load.
-	 */
-	for (i = 0; i < ehdr->e_phnum; i++) {
-		/* If this isn't a loadable segment, we ignore it */
-		if (phdr[i].p_type != PT_LOAD)
-			continue;
-
-		verbose("Section %i: size %i addr %p\n",
-			i, phdr[i].p_memsz, (void *)phdr[i].p_paddr);
-
-		/* We map this section of the file at its physical address. */
-		map_at(elf_fd, from_guest_phys(phdr[i].p_paddr),
-		       phdr[i].p_offset, phdr[i].p_filesz);
-	}
-
-	/* The entry point is given in the ELF header. */
-	return ehdr->e_entry;
-}
-
-/*L:150
- * A bzImage, unlike an ELF file, is not meant to be loaded.  You're supposed
- * to jump into it and it will unpack itself.  We used to have to perform some
- * hairy magic because the unpacking code scared me.
- *
- * Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
- * a small patch to jump over the tricky bits in the Guest, so now we just read
- * the funky header so we know where in the file to load, and away we go!
- */
-static unsigned long load_bzimage(int fd)
-{
-	struct boot_params boot;
-	int r;
-	/* Modern bzImages get loaded at 1M. */
-	void *p = from_guest_phys(0x100000);
-
-	/*
-	 * Go back to the start of the file and read the header.  It should be
-	 * a Linux boot header (see Documentation/x86/boot.txt)
-	 */
-	lseek(fd, 0, SEEK_SET);
-	read(fd, &boot, sizeof(boot));
-
-	/* Inside the setup_hdr, we expect the magic "HdrS" */
-	if (memcmp(&boot.hdr.header, "HdrS", 4) != 0)
-		errx(1, "This doesn't look like a bzImage to me");
-
-	/* Skip over the extra sectors of the header. */
-	lseek(fd, (boot.hdr.setup_sects+1) * 512, SEEK_SET);
-
-	/* Now read everything into memory. in nice big chunks. */
-	while ((r = read(fd, p, 65536)) > 0)
-		p += r;
-
-	/* Finally, code32_start tells us where to enter the kernel. */
-	return boot.hdr.code32_start;
-}
-
-/*L:140
- * Loading the kernel is easy when it's a "vmlinux", but most kernels
- * come wrapped up in the self-decompressing "bzImage" format.  With a little
- * work, we can load those, too.
- */
-static unsigned long load_kernel(int fd)
-{
-	Elf32_Ehdr hdr;
-
-	/* Read in the first few bytes. */
-	if (read(fd, &hdr, sizeof(hdr)) != sizeof(hdr))
-		err(1, "Reading kernel");
-
-	/* If it's an ELF file, it starts with "\177ELF" */
-	if (memcmp(hdr.e_ident, ELFMAG, SELFMAG) == 0)
-		return map_elf(fd, &hdr);
-
-	/* Otherwise we assume it's a bzImage, and try to load it. */
-	return load_bzimage(fd);
-}
-
-/*
- * This is a trivial little helper to align pages.  Andi Kleen hated it because
- * it calls getpagesize() twice: "it's dumb code."
- *
- * Kernel guys get really het up about optimization, even when it's not
- * necessary.  I leave this code as a reaction against that.
- */
-static inline unsigned long page_align(unsigned long addr)
-{
-	/* Add upwards and truncate downwards. */
-	return ((addr + getpagesize()-1) & ~(getpagesize()-1));
-}
-
-/*L:180
- * An "initial ram disk" is a disk image loaded into memory along with the
- * kernel which the kernel can use to boot from without needing any drivers.
- * Most distributions now use this as standard: the initrd contains the code to
- * load the appropriate driver modules for the current machine.
- *
- * Importantly, James Morris works for RedHat, and Fedora uses initrds for its
- * kernels.  He sent me this (and tells me when I break it).
- */
-static unsigned long load_initrd(const char *name, unsigned long mem)
-{
-	int ifd;
-	struct stat st;
-	unsigned long len;
-
-	ifd = open_or_die(name, O_RDONLY);
-	/* fstat() is needed to get the file size. */
-	if (fstat(ifd, &st) < 0)
-		err(1, "fstat() on initrd '%s'", name);
-
-	/*
-	 * We map the initrd at the top of memory, but mmap wants it to be
-	 * page-aligned, so we round the size up for that.
-	 */
-	len = page_align(st.st_size);
-	map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
-	/*
-	 * Once a file is mapped, you can close the file descriptor.  It's a
-	 * little odd, but quite useful.
-	 */
-	close(ifd);
-	verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
-
-	/* We return the initrd size. */
-	return len;
-}
-/*:*/
-
-/*
- * Simple routine to roll all the commandline arguments together with spaces
- * between them.
- */
-static void concat(char *dst, char *args[])
-{
-	unsigned int i, len = 0;
-
-	for (i = 0; args[i]; i++) {
-		if (i) {
-			strcat(dst+len, " ");
-			len++;
-		}
-		strcpy(dst+len, args[i]);
-		len += strlen(args[i]);
-	}
-	/* In case it's empty. */
-	dst[len] = '\0';
-}
-
-/*L:185
- * This is where we actually tell the kernel to initialize the Guest.  We
- * saw the arguments it expects when we looked at initialize() in lguest_user.c:
- * the base of Guest "physical" memory, the top physical page to allow and the
- * entry point for the Guest.
- */
-static void tell_kernel(unsigned long start)
-{
-	unsigned long args[] = { LHREQ_INITIALIZE,
-				 (unsigned long)guest_base,
-				 guest_limit / getpagesize(), start };
-	verbose("Guest: %p - %p (%#lx)\n",
-		guest_base, guest_base + guest_limit, guest_limit);
-	lguest_fd = open_or_die("/dev/lguest", O_RDWR);
-	if (write(lguest_fd, args, sizeof(args)) < 0)
-		err(1, "Writing to /dev/lguest");
-}
-/*:*/
-
-/*L:200
- * Device Handling.
- *
- * When the Guest gives us a buffer, it sends an array of addresses and sizes.
- * We need to make sure it's not trying to reach into the Launcher itself, so
- * we have a convenient routine which checks it and exits with an error message
- * if something funny is going on:
- */
-static void *_check_pointer(unsigned long addr, unsigned int size,
-			    unsigned int line)
-{
-	/*
-	 * Check if the requested address and size exceeds the allocated memory,
-	 * or addr + size wraps around.
-	 */
-	if ((addr + size) > guest_limit || (addr + size) < addr)
-		errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
-	/*
-	 * We return a pointer for the caller's convenience, now we know it's
-	 * safe to use.
-	 */
-	return from_guest_phys(addr);
-}
-/* A macro which transparently hands the line number to the real function. */
-#define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
-
-/*
- * Each buffer in the virtqueues is actually a chain of descriptors.  This
- * function returns the next descriptor in the chain, or vq->vring.num if we're
- * at the end.
- */
-static unsigned next_desc(struct vring_desc *desc,
-			  unsigned int i, unsigned int max)
-{
-	unsigned int next;
-
-	/* If this descriptor says it doesn't chain, we're done. */
-	if (!(desc[i].flags & VRING_DESC_F_NEXT))
-		return max;
-
-	/* Check they're not leading us off end of descriptors. */
-	next = desc[i].next;
-	/* Make sure compiler knows to grab that: we don't want it changing! */
-	wmb();
-
-	if (next >= max)
-		errx(1, "Desc next is %u", next);
-
-	return next;
-}
-
-/*
- * This actually sends the interrupt for this virtqueue, if we've used a
- * buffer.
- */
-static void trigger_irq(struct virtqueue *vq)
-{
-	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
-
-	/* Don't inform them if nothing used. */
-	if (!vq->pending_used)
-		return;
-	vq->pending_used = 0;
-
-	/* If they don't want an interrupt, don't send one... */
-	if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) {
-		return;
-	}
-
-	/* Send the Guest an interrupt tell them we used something up. */
-	if (write(lguest_fd, buf, sizeof(buf)) != 0)
-		err(1, "Triggering irq %i", vq->config.irq);
-}
-
-/*
- * This looks in the virtqueue for the first available buffer, and converts
- * it to an iovec for convenient access.  Since descriptors consist of some
- * number of output then some number of input descriptors, it's actually two
- * iovecs, but we pack them into one and note how many of each there were.
- *
- * This function waits if necessary, and returns the descriptor number found.
- */
-static unsigned wait_for_vq_desc(struct virtqueue *vq,
-				 struct iovec iov[],
-				 unsigned int *out_num, unsigned int *in_num)
-{
-	unsigned int i, head, max;
-	struct vring_desc *desc;
-	u16 last_avail = lg_last_avail(vq);
-
-	/* There's nothing available? */
-	while (last_avail == vq->vring.avail->idx) {
-		u64 event;
-
-		/*
-		 * Since we're about to sleep, now is a good time to tell the
-		 * Guest about what we've used up to now.
-		 */
-		trigger_irq(vq);
-
-		/* OK, now we need to know about added descriptors. */
-		vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
-
-		/*
-		 * They could have slipped one in as we were doing that: make
-		 * sure it's written, then check again.
-		 */
-		mb();
-		if (last_avail != vq->vring.avail->idx) {
-			vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
-			break;
-		}
-
-		/* Nothing new?  Wait for eventfd to tell us they refilled. */
-		if (read(vq->eventfd, &event, sizeof(event)) != sizeof(event))
-			errx(1, "Event read failed?");
-
-		/* We don't need to be notified again. */
-		vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
-	}
-
-	/* Check it isn't doing very strange things with descriptor numbers. */
-	if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
-		errx(1, "Guest moved used index from %u to %u",
-		     last_avail, vq->vring.avail->idx);
-
-	/*
-	 * Grab the next descriptor number they're advertising, and increment
-	 * the index we've seen.
-	 */
-	head = vq->vring.avail->ring[last_avail % vq->vring.num];
-	lg_last_avail(vq)++;
-
-	/* If their number is silly, that's a fatal mistake. */
-	if (head >= vq->vring.num)
-		errx(1, "Guest says index %u is available", head);
-
-	/* When we start there are none of either input nor output. */
-	*out_num = *in_num = 0;
-
-	max = vq->vring.num;
-	desc = vq->vring.desc;
-	i = head;
-
-	/*
-	 * If this is an indirect entry, then this buffer contains a descriptor
-	 * table which we handle as if it's any normal descriptor chain.
-	 */
-	if (desc[i].flags & VRING_DESC_F_INDIRECT) {
-		if (desc[i].len % sizeof(struct vring_desc))
-			errx(1, "Invalid size for indirect buffer table");
-
-		max = desc[i].len / sizeof(struct vring_desc);
-		desc = check_pointer(desc[i].addr, desc[i].len);
-		i = 0;
-	}
-
-	do {
-		/* Grab the first descriptor, and check it's OK. */
-		iov[*out_num + *in_num].iov_len = desc[i].len;
-		iov[*out_num + *in_num].iov_base
-			= check_pointer(desc[i].addr, desc[i].len);
-		/* If this is an input descriptor, increment that count. */
-		if (desc[i].flags & VRING_DESC_F_WRITE)
-			(*in_num)++;
-		else {
-			/*
-			 * If it's an output descriptor, they're all supposed
-			 * to come before any input descriptors.
-			 */
-			if (*in_num)
-				errx(1, "Descriptor has out after in");
-			(*out_num)++;
-		}
-
-		/* If we've got too many, that implies a descriptor loop. */
-		if (*out_num + *in_num > max)
-			errx(1, "Looped descriptor");
-	} while ((i = next_desc(desc, i, max)) != max);
-
-	return head;
-}
-
-/*
- * After we've used one of their buffers, we tell the Guest about it.  Sometime
- * later we'll want to send them an interrupt using trigger_irq(); note that
- * wait_for_vq_desc() does that for us if it has to wait.
- */
-static void add_used(struct virtqueue *vq, unsigned int head, int len)
-{
-	struct vring_used_elem *used;
-
-	/*
-	 * The virtqueue contains a ring of used buffers.  Get a pointer to the
-	 * next entry in that used ring.
-	 */
-	used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
-	used->id = head;
-	used->len = len;
-	/* Make sure buffer is written before we update index. */
-	wmb();
-	vq->vring.used->idx++;
-	vq->pending_used++;
-}
-
-/* And here's the combo meal deal.  Supersize me! */
-static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
-{
-	add_used(vq, head, len);
-	trigger_irq(vq);
-}
-
-/*
- * The Console
- *
- * We associate some data with the console for our exit hack.
- */
-struct console_abort {
-	/* How many times have they hit ^C? */
-	int count;
-	/* When did they start? */
-	struct timeval start;
-};
-
-/* This is the routine which handles console input (ie. stdin). */
-static void console_input(struct virtqueue *vq)
-{
-	int len;
-	unsigned int head, in_num, out_num;
-	struct console_abort *abort = vq->dev->priv;
-	struct iovec iov[vq->vring.num];
-
-	/* Make sure there's a descriptor available. */
-	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
-	if (out_num)
-		errx(1, "Output buffers in console in queue?");
-
-	/* Read into it.  This is where we usually wait. */
-	len = readv(STDIN_FILENO, iov, in_num);
-	if (len <= 0) {
-		/* Ran out of input? */
-		warnx("Failed to get console input, ignoring console.");
-		/*
-		 * For simplicity, dying threads kill the whole Launcher.  So
-		 * just nap here.
-		 */
-		for (;;)
-			pause();
-	}
-
-	/* Tell the Guest we used a buffer. */
-	add_used_and_trigger(vq, head, len);
-
-	/*
-	 * Three ^C within one second?  Exit.
-	 *
-	 * This is such a hack, but works surprisingly well.  Each ^C has to
-	 * be in a buffer by itself, so they can't be too fast.  But we check
-	 * that we get three within about a second, so they can't be too
-	 * slow.
-	 */
-	if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
-		abort->count = 0;
-		return;
-	}
-
-	abort->count++;
-	if (abort->count == 1)
-		gettimeofday(&abort->start, NULL);
-	else if (abort->count == 3) {
-		struct timeval now;
-		gettimeofday(&now, NULL);
-		/* Kill all Launcher processes with SIGINT, like normal ^C */
-		if (now.tv_sec <= abort->start.tv_sec+1)
-			kill(0, SIGINT);
-		abort->count = 0;
-	}
-}
-
-/* This is the routine which handles console output (ie. stdout). */
-static void console_output(struct virtqueue *vq)
-{
-	unsigned int head, out, in;
-	struct iovec iov[vq->vring.num];
-
-	/* We usually wait in here, for the Guest to give us something. */
-	head = wait_for_vq_desc(vq, iov, &out, &in);
-	if (in)
-		errx(1, "Input buffers in console output queue?");
-
-	/* writev can return a partial write, so we loop here. */
-	while (!iov_empty(iov, out)) {
-		int len = writev(STDOUT_FILENO, iov, out);
-		if (len <= 0) {
-			warn("Write to stdout gave %i (%d)", len, errno);
-			break;
-		}
-		iov_consume(iov, out, len);
-	}
-
-	/*
-	 * We're finished with that buffer: if we're going to sleep,
-	 * wait_for_vq_desc() will prod the Guest with an interrupt.
-	 */
-	add_used(vq, head, 0);
-}
-
-/*
- * The Network
- *
- * Handling output for network is also simple: we get all the output buffers
- * and write them to /dev/net/tun.
- */
-struct net_info {
-	int tunfd;
-};
-
-static void net_output(struct virtqueue *vq)
-{
-	struct net_info *net_info = vq->dev->priv;
-	unsigned int head, out, in;
-	struct iovec iov[vq->vring.num];
-
-	/* We usually wait in here for the Guest to give us a packet. */
-	head = wait_for_vq_desc(vq, iov, &out, &in);
-	if (in)
-		errx(1, "Input buffers in net output queue?");
-	/*
-	 * Send the whole thing through to /dev/net/tun.  It expects the exact
-	 * same format: what a coincidence!
-	 */
-	if (writev(net_info->tunfd, iov, out) < 0)
-		warnx("Write to tun failed (%d)?", errno);
-
-	/*
-	 * Done with that one; wait_for_vq_desc() will send the interrupt if
-	 * all packets are processed.
-	 */
-	add_used(vq, head, 0);
-}
-
-/*
- * Handling network input is a bit trickier, because I've tried to optimize it.
- *
- * First we have a helper routine which tells is if from this file descriptor
- * (ie. the /dev/net/tun device) will block:
- */
-static bool will_block(int fd)
-{
-	fd_set fdset;
-	struct timeval zero = { 0, 0 };
-	FD_ZERO(&fdset);
-	FD_SET(fd, &fdset);
-	return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
-}
-
-/*
- * This handles packets coming in from the tun device to our Guest.  Like all
- * service routines, it gets called again as soon as it returns, so you don't
- * see a while(1) loop here.
- */
-static void net_input(struct virtqueue *vq)
-{
-	int len;
-	unsigned int head, out, in;
-	struct iovec iov[vq->vring.num];
-	struct net_info *net_info = vq->dev->priv;
-
-	/*
-	 * Get a descriptor to write an incoming packet into.  This will also
-	 * send an interrupt if they're out of descriptors.
-	 */
-	head = wait_for_vq_desc(vq, iov, &out, &in);
-	if (out)
-		errx(1, "Output buffers in net input queue?");
-
-	/*
-	 * If it looks like we'll block reading from the tun device, send them
-	 * an interrupt.
-	 */
-	if (vq->pending_used && will_block(net_info->tunfd))
-		trigger_irq(vq);
-
-	/*
-	 * Read in the packet.  This is where we normally wait (when there's no
-	 * incoming network traffic).
-	 */
-	len = readv(net_info->tunfd, iov, in);
-	if (len <= 0)
-		warn("Failed to read from tun (%d).", errno);
-
-	/*
-	 * Mark that packet buffer as used, but don't interrupt here.  We want
-	 * to wait until we've done as much work as we can.
-	 */
-	add_used(vq, head, len);
-}
-/*:*/
-
-/* This is the helper to create threads: run the service routine in a loop. */
-static int do_thread(void *_vq)
-{
-	struct virtqueue *vq = _vq;
-
-	for (;;)
-		vq->service(vq);
-	return 0;
-}
-
-/*
- * When a child dies, we kill our entire process group with SIGTERM.  This
- * also has the side effect that the shell restores the console for us!
- */
-static void kill_launcher(int signal)
-{
-	kill(0, SIGTERM);
-}
-
-static void reset_device(struct device *dev)
-{
-	struct virtqueue *vq;
-
-	verbose("Resetting device %s\n", dev->name);
-
-	/* Clear any features they've acked. */
-	memset(get_feature_bits(dev) + dev->feature_len, 0, dev->feature_len);
-
-	/* We're going to be explicitly killing threads, so ignore them. */
-	signal(SIGCHLD, SIG_IGN);
-
-	/* Zero out the virtqueues, get rid of their threads */
-	for (vq = dev->vq; vq; vq = vq->next) {
-		if (vq->thread != (pid_t)-1) {
-			kill(vq->thread, SIGTERM);
-			waitpid(vq->thread, NULL, 0);
-			vq->thread = (pid_t)-1;
-		}
-		memset(vq->vring.desc, 0,
-		       vring_size(vq->config.num, LGUEST_VRING_ALIGN));
-		lg_last_avail(vq) = 0;
-	}
-	dev->running = false;
-
-	/* Now we care if threads die. */
-	signal(SIGCHLD, (void *)kill_launcher);
-}
-
-/*L:216
- * This actually creates the thread which services the virtqueue for a device.
- */
-static void create_thread(struct virtqueue *vq)
-{
-	/*
-	 * Create stack for thread.  Since the stack grows upwards, we point
-	 * the stack pointer to the end of this region.
-	 */
-	char *stack = malloc(32768);
-	unsigned long args[] = { LHREQ_EVENTFD,
-				 vq->config.pfn*getpagesize(), 0 };
-
-	/* Create a zero-initialized eventfd. */
-	vq->eventfd = eventfd(0, 0);
-	if (vq->eventfd < 0)
-		err(1, "Creating eventfd");
-	args[2] = vq->eventfd;
-
-	/*
-	 * Attach an eventfd to this virtqueue: it will go off when the Guest
-	 * does an LHCALL_NOTIFY for this vq.
-	 */
-	if (write(lguest_fd, &args, sizeof(args)) != 0)
-		err(1, "Attaching eventfd");
-
-	/*
-	 * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
-	 * we get a signal if it dies.
-	 */
-	vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
-	if (vq->thread == (pid_t)-1)
-		err(1, "Creating clone");
-
-	/* We close our local copy now the child has it. */
-	close(vq->eventfd);
-}
-
-static void start_device(struct device *dev)
-{
-	unsigned int i;
-	struct virtqueue *vq;
-
-	verbose("Device %s OK: offered", dev->name);
-	for (i = 0; i < dev->feature_len; i++)
-		verbose(" %02x", get_feature_bits(dev)[i]);
-	verbose(", accepted");
-	for (i = 0; i < dev->feature_len; i++)
-		verbose(" %02x", get_feature_bits(dev)
-			[dev->feature_len+i]);
-
-	for (vq = dev->vq; vq; vq = vq->next) {
-		if (vq->service)
-			create_thread(vq);
-	}
-	dev->running = true;
-}
-
-static void cleanup_devices(void)
-{
-	struct device *dev;
-
-	for (dev = devices.dev; dev; dev = dev->next)
-		reset_device(dev);
-
-	/* If we saved off the original terminal settings, restore them now. */
-	if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
-		tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
-}
-
-/* When the Guest tells us they updated the status field, we handle it. */
-static void update_device_status(struct device *dev)
-{
-	/* A zero status is a reset, otherwise it's a set of flags. */
-	if (dev->desc->status == 0)
-		reset_device(dev);
-	else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
-		warnx("Device %s configuration FAILED", dev->name);
-		if (dev->running)
-			reset_device(dev);
-	} else {
-		if (dev->running)
-			err(1, "Device %s features finalized twice", dev->name);
-		start_device(dev);
-	}
-}
-
-/*L:215
- * This is the generic routine we call when the Guest uses LHCALL_NOTIFY.  In
- * particular, it's used to notify us of device status changes during boot.
- */
-static void handle_output(unsigned long addr)
-{
-	struct device *i;
-
-	/* Check each device. */
-	for (i = devices.dev; i; i = i->next) {
-		struct virtqueue *vq;
-
-		/*
-		 * Notifications to device descriptors mean they updated the
-		 * device status.
-		 */
-		if (from_guest_phys(addr) == i->desc) {
-			update_device_status(i);
-			return;
-		}
-
-		/* Devices should not be used before features are finalized. */
-		for (vq = i->vq; vq; vq = vq->next) {
-			if (addr != vq->config.pfn*getpagesize())
-				continue;
-			errx(1, "Notification on %s before setup!", i->name);
-		}
-	}
-
-	/*
-	 * Early console write is done using notify on a nul-terminated string
-	 * in Guest memory.  It's also great for hacking debugging messages
-	 * into a Guest.
-	 */
-	if (addr >= guest_limit)
-		errx(1, "Bad NOTIFY %#lx", addr);
-
-	write(STDOUT_FILENO, from_guest_phys(addr),
-	      strnlen(from_guest_phys(addr), guest_limit - addr));
-}
-
-/*L:190
- * Device Setup
- *
- * All devices need a descriptor so the Guest knows it exists, and a "struct
- * device" so the Launcher can keep track of it.  We have common helper
- * routines to allocate and manage them.
- */
-
-/*
- * The layout of the device page is a "struct lguest_device_desc" followed by a
- * number of virtqueue descriptors, then two sets of feature bits, then an
- * array of configuration bytes.  This routine returns the configuration
- * pointer.
- */
-static u8 *device_config(const struct device *dev)
-{
-	return (void *)(dev->desc + 1)
-		+ dev->num_vq * sizeof(struct lguest_vqconfig)
-		+ dev->feature_len * 2;
-}
-
-/*
- * This routine allocates a new "struct lguest_device_desc" from descriptor
- * table page just above the Guest's normal memory.  It returns a pointer to
- * that descriptor.
- */
-static struct lguest_device_desc *new_dev_desc(u16 type)
-{
-	struct lguest_device_desc d = { .type = type };
-	void *p;
-
-	/* Figure out where the next device config is, based on the last one. */
-	if (devices.lastdev)
-		p = device_config(devices.lastdev)
-			+ devices.lastdev->desc->config_len;
-	else
-		p = devices.descpage;
-
-	/* We only have one page for all the descriptors. */
-	if (p + sizeof(d) > (void *)devices.descpage + getpagesize())
-		errx(1, "Too many devices");
-
-	/* p might not be aligned, so we memcpy in. */
-	return memcpy(p, &d, sizeof(d));
-}
-
-/*
- * Each device descriptor is followed by the description of its virtqueues.  We
- * specify how many descriptors the virtqueue is to have.
- */
-static void add_virtqueue(struct device *dev, unsigned int num_descs,
-			  void (*service)(struct virtqueue *))
-{
-	unsigned int pages;
-	struct virtqueue **i, *vq = malloc(sizeof(*vq));
-	void *p;
-
-	/* First we need some memory for this virtqueue. */
-	pages = (vring_size(num_descs, LGUEST_VRING_ALIGN) + getpagesize() - 1)
-		/ getpagesize();
-	p = get_pages(pages);
-
-	/* Initialize the virtqueue */
-	vq->next = NULL;
-	vq->last_avail_idx = 0;
-	vq->dev = dev;
-
-	/*
-	 * This is the routine the service thread will run, and its Process ID
-	 * once it's running.
-	 */
-	vq->service = service;
-	vq->thread = (pid_t)-1;
-
-	/* Initialize the configuration. */
-	vq->config.num = num_descs;
-	vq->config.irq = devices.next_irq++;
-	vq->config.pfn = to_guest_phys(p) / getpagesize();
-
-	/* Initialize the vring. */
-	vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
-
-	/*
-	 * Append virtqueue to this device's descriptor.  We use
-	 * device_config() to get the end of the device's current virtqueues;
-	 * we check that we haven't added any config or feature information
-	 * yet, otherwise we'd be overwriting them.
-	 */
-	assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
-	memcpy(device_config(dev), &vq->config, sizeof(vq->config));
-	dev->num_vq++;
-	dev->desc->num_vq++;
-
-	verbose("Virtqueue page %#lx\n", to_guest_phys(p));
-
-	/*
-	 * Add to tail of list, so dev->vq is first vq, dev->vq->next is
-	 * second.
-	 */
-	for (i = &dev->vq; *i; i = &(*i)->next);
-	*i = vq;
-}
-
-/*
- * The first half of the feature bitmask is for us to advertise features.  The
- * second half is for the Guest to accept features.
- */
-static void add_feature(struct device *dev, unsigned bit)
-{
-	u8 *features = get_feature_bits(dev);
-
-	/* We can't extend the feature bits once we've added config bytes */
-	if (dev->desc->feature_len <= bit / CHAR_BIT) {
-		assert(dev->desc->config_len == 0);
-		dev->feature_len = dev->desc->feature_len = (bit/CHAR_BIT) + 1;
-	}
-
-	features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
-}
-
-/*
- * This routine sets the configuration fields for an existing device's
- * descriptor.  It only works for the last device, but that's OK because that's
- * how we use it.
- */
-static void set_config(struct device *dev, unsigned len, const void *conf)
-{
-	/* Check we haven't overflowed our single page. */
-	if (device_config(dev) + len > devices.descpage + getpagesize())
-		errx(1, "Too many devices");
-
-	/* Copy in the config information, and store the length. */
-	memcpy(device_config(dev), conf, len);
-	dev->desc->config_len = len;
-
-	/* Size must fit in config_len field (8 bits)! */
-	assert(dev->desc->config_len == len);
-}
-
-/*
- * This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory.  We
- * don't actually start the service threads until later.
- *
- * See what I mean about userspace being boring?
- */
-static struct device *new_device(const char *name, u16 type)
-{
-	struct device *dev = malloc(sizeof(*dev));
-
-	/* Now we populate the fields one at a time. */
-	dev->desc = new_dev_desc(type);
-	dev->name = name;
-	dev->vq = NULL;
-	dev->feature_len = 0;
-	dev->num_vq = 0;
-	dev->running = false;
-
-	/*
-	 * Append to device list.  Prepending to a single-linked list is
-	 * easier, but the user expects the devices to be arranged on the bus
-	 * in command-line order.  The first network device on the command line
-	 * is eth0, the first block device /dev/vda, etc.
-	 */
-	if (devices.lastdev)
-		devices.lastdev->next = dev;
-	else
-		devices.dev = dev;
-	devices.lastdev = dev;
-
-	return dev;
-}
-
-/*
- * Our first setup routine is the console.  It's a fairly simple device, but
- * UNIX tty handling makes it uglier than it could be.
- */
-static void setup_console(void)
-{
-	struct device *dev;
-
-	/* If we can save the initial standard input settings... */
-	if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
-		struct termios term = orig_term;
-		/*
-		 * Then we turn off echo, line buffering and ^C etc: We want a
-		 * raw input stream to the Guest.
-		 */
-		term.c_lflag &= ~(ISIG|ICANON|ECHO);
-		tcsetattr(STDIN_FILENO, TCSANOW, &term);
-	}
-
-	dev = new_device("console", VIRTIO_ID_CONSOLE);
-
-	/* We store the console state in dev->priv, and initialize it. */
-	dev->priv = malloc(sizeof(struct console_abort));
-	((struct console_abort *)dev->priv)->count = 0;
-
-	/*
-	 * The console needs two virtqueues: the input then the output.  When
-	 * they put something the input queue, we make sure we're listening to
-	 * stdin.  When they put something in the output queue, we write it to
-	 * stdout.
-	 */
-	add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
-	add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
-
-	verbose("device %u: console\n", ++devices.device_num);
-}
-/*:*/
-
-/*M:010
- * Inter-guest networking is an interesting area.  Simplest is to have a
- * --sharenet=<name> option which opens or creates a named pipe.  This can be
- * used to send packets to another guest in a 1:1 manner.
- *
- * More sophisticated is to use one of the tools developed for project like UML
- * to do networking.
- *
- * Faster is to do virtio bonding in kernel.  Doing this 1:1 would be
- * completely generic ("here's my vring, attach to your vring") and would work
- * for any traffic.  Of course, namespace and permissions issues need to be
- * dealt with.  A more sophisticated "multi-channel" virtio_net.c could hide
- * multiple inter-guest channels behind one interface, although it would
- * require some manner of hotplugging new virtio channels.
- *
- * Finally, we could use a virtio network switch in the kernel, ie. vhost.
-:*/
-
-static u32 str2ip(const char *ipaddr)
-{
-	unsigned int b[4];
-
-	if (sscanf(ipaddr, "%u.%u.%u.%u", &b[0], &b[1], &b[2], &b[3]) != 4)
-		errx(1, "Failed to parse IP address '%s'", ipaddr);
-	return (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
-}
-
-static void str2mac(const char *macaddr, unsigned char mac[6])
-{
-	unsigned int m[6];
-	if (sscanf(macaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
-		   &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]) != 6)
-		errx(1, "Failed to parse mac address '%s'", macaddr);
-	mac[0] = m[0];
-	mac[1] = m[1];
-	mac[2] = m[2];
-	mac[3] = m[3];
-	mac[4] = m[4];
-	mac[5] = m[5];
-}
-
-/*
- * This code is "adapted" from libbridge: it attaches the Host end of the
- * network device to the bridge device specified by the command line.
- *
- * This is yet another James Morris contribution (I'm an IP-level guy, so I
- * dislike bridging), and I just try not to break it.
- */
-static void add_to_bridge(int fd, const char *if_name, const char *br_name)
-{
-	int ifidx;
-	struct ifreq ifr;
-
-	if (!*br_name)
-		errx(1, "must specify bridge name");
-
-	ifidx = if_nametoindex(if_name);
-	if (!ifidx)
-		errx(1, "interface %s does not exist!", if_name);
-
-	strncpy(ifr.ifr_name, br_name, IFNAMSIZ);
-	ifr.ifr_name[IFNAMSIZ-1] = '\0';
-	ifr.ifr_ifindex = ifidx;
-	if (ioctl(fd, SIOCBRADDIF, &ifr) < 0)
-		err(1, "can't add %s to bridge %s", if_name, br_name);
-}
-
-/*
- * This sets up the Host end of the network device with an IP address, brings
- * it up so packets will flow, the copies the MAC address into the hwaddr
- * pointer.
- */
-static void configure_device(int fd, const char *tapif, u32 ipaddr)
-{
-	struct ifreq ifr;
-	struct sockaddr_in sin;
-
-	memset(&ifr, 0, sizeof(ifr));
-	strcpy(ifr.ifr_name, tapif);
-
-	/* Don't read these incantations.  Just cut & paste them like I did! */
-	sin.sin_family = AF_INET;
-	sin.sin_addr.s_addr = htonl(ipaddr);
-	memcpy(&ifr.ifr_addr, &sin, sizeof(sin));
-	if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
-		err(1, "Setting %s interface address", tapif);
-	ifr.ifr_flags = IFF_UP;
-	if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0)
-		err(1, "Bringing interface %s up", tapif);
-}
-
-static int get_tun_device(char tapif[IFNAMSIZ])
-{
-	struct ifreq ifr;
-	int netfd;
-
-	/* Start with this zeroed.  Messy but sure. */
-	memset(&ifr, 0, sizeof(ifr));
-
-	/*
-	 * We open the /dev/net/tun device and tell it we want a tap device.  A
-	 * tap device is like a tun device, only somehow different.  To tell
-	 * the truth, I completely blundered my way through this code, but it
-	 * works now!
-	 */
-	netfd = open_or_die("/dev/net/tun", O_RDWR);
-	ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
-	strcpy(ifr.ifr_name, "tap%d");
-	if (ioctl(netfd, TUNSETIFF, &ifr) != 0)
-		err(1, "configuring /dev/net/tun");
-
-	if (ioctl(netfd, TUNSETOFFLOAD,
-		  TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
-		err(1, "Could not set features for tun device");
-
-	/*
-	 * We don't need checksums calculated for packets coming in this
-	 * device: trust us!
-	 */
-	ioctl(netfd, TUNSETNOCSUM, 1);
-
-	memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
-	return netfd;
-}
-
-/*L:195
- * Our network is a Host<->Guest network.  This can either use bridging or
- * routing, but the principle is the same: it uses the "tun" device to inject
- * packets into the Host as if they came in from a normal network card.  We
- * just shunt packets between the Guest and the tun device.
- */
-static void setup_tun_net(char *arg)
-{
-	struct device *dev;
-	struct net_info *net_info = malloc(sizeof(*net_info));
-	int ipfd;
-	u32 ip = INADDR_ANY;
-	bool bridging = false;
-	char tapif[IFNAMSIZ], *p;
-	struct virtio_net_config conf;
-
-	net_info->tunfd = get_tun_device(tapif);
-
-	/* First we create a new network device. */
-	dev = new_device("net", VIRTIO_ID_NET);
-	dev->priv = net_info;
-
-	/* Network devices need a recv and a send queue, just like console. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
-	add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
-
-	/*
-	 * We need a socket to perform the magic network ioctls to bring up the
-	 * tap interface, connect to the bridge etc.  Any socket will do!
-	 */
-	ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
-	if (ipfd < 0)
-		err(1, "opening IP socket");
-
-	/* If the command line was --tunnet=bridge:<name> do bridging. */
-	if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) {
-		arg += strlen(BRIDGE_PFX);
-		bridging = true;
-	}
-
-	/* A mac address may follow the bridge name or IP address */
-	p = strchr(arg, ':');
-	if (p) {
-		str2mac(p+1, conf.mac);
-		add_feature(dev, VIRTIO_NET_F_MAC);
-		*p = '\0';
-	}
-
-	/* arg is now either an IP address or a bridge name */
-	if (bridging)
-		add_to_bridge(ipfd, tapif, arg);
-	else
-		ip = str2ip(arg);
-
-	/* Set up the tun device. */
-	configure_device(ipfd, tapif, ip);
-
-	/* Expect Guest to handle everything except UFO */
-	add_feature(dev, VIRTIO_NET_F_CSUM);
-	add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
-	add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
-	add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
-	add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
-	add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
-	add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
-	add_feature(dev, VIRTIO_NET_F_HOST_ECN);
-	/* We handle indirect ring entries */
-	add_feature(dev, VIRTIO_RING_F_INDIRECT_DESC);
-	set_config(dev, sizeof(conf), &conf);
-
-	/* We don't need the socket any more; setup is done. */
-	close(ipfd);
-
-	devices.device_num++;
-
-	if (bridging)
-		verbose("device %u: tun %s attached to bridge: %s\n",
-			devices.device_num, tapif, arg);
-	else
-		verbose("device %u: tun %s: %s\n",
-			devices.device_num, tapif, arg);
-}
-/*:*/
-
-/* This hangs off device->priv. */
-struct vblk_info {
-	/* The size of the file. */
-	off64_t len;
-
-	/* The file descriptor for the file. */
-	int fd;
-
-};
-
-/*L:210
- * The Disk
- *
- * The disk only has one virtqueue, so it only has one thread.  It is really
- * simple: the Guest asks for a block number and we read or write that position
- * in the file.
- *
- * Before we serviced each virtqueue in a separate thread, that was unacceptably
- * slow: the Guest waits until the read is finished before running anything
- * else, even if it could have been doing useful work.
- *
- * We could have used async I/O, except it's reputed to suck so hard that
- * characters actually go missing from your code when you try to use it.
- */
-static void blk_request(struct virtqueue *vq)
-{
-	struct vblk_info *vblk = vq->dev->priv;
-	unsigned int head, out_num, in_num, wlen;
-	int ret;
-	u8 *in;
-	struct virtio_blk_outhdr *out;
-	struct iovec iov[vq->vring.num];
-	off64_t off;
-
-	/*
-	 * Get the next request, where we normally wait.  It triggers the
-	 * interrupt to acknowledge previously serviced requests (if any).
-	 */
-	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
-
-	/*
-	 * Every block request should contain at least one output buffer
-	 * (detailing the location on disk and the type of request) and one
-	 * input buffer (to hold the result).
-	 */
-	if (out_num == 0 || in_num == 0)
-		errx(1, "Bad virtblk cmd %u out=%u in=%u",
-		     head, out_num, in_num);
-
-	out = convert(&iov[0], struct virtio_blk_outhdr);
-	in = convert(&iov[out_num+in_num-1], u8);
-	/*
-	 * For historical reasons, block operations are expressed in 512 byte
-	 * "sectors".
-	 */
-	off = out->sector * 512;
-
-	/*
-	 * In general the virtio block driver is allowed to try SCSI commands.
-	 * It'd be nice if we supported eject, for example, but we don't.
-	 */
-	if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
-		fprintf(stderr, "Scsi commands unsupported\n");
-		*in = VIRTIO_BLK_S_UNSUPP;
-		wlen = sizeof(*in);
-	} else if (out->type & VIRTIO_BLK_T_OUT) {
-		/*
-		 * Write
-		 *
-		 * Move to the right location in the block file.  This can fail
-		 * if they try to write past end.
-		 */
-		if (lseek64(vblk->fd, off, SEEK_SET) != off)
-			err(1, "Bad seek to sector %llu", out->sector);
-
-		ret = writev(vblk->fd, iov+1, out_num-1);
-		verbose("WRITE to sector %llu: %i\n", out->sector, ret);
-
-		/*
-		 * Grr... Now we know how long the descriptor they sent was, we
-		 * make sure they didn't try to write over the end of the block
-		 * file (possibly extending it).
-		 */
-		if (ret > 0 && off + ret > vblk->len) {
-			/* Trim it back to the correct length */
-			ftruncate64(vblk->fd, vblk->len);
-			/* Die, bad Guest, die. */
-			errx(1, "Write past end %llu+%u", off, ret);
-		}
-
-		wlen = sizeof(*in);
-		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
-	} else if (out->type & VIRTIO_BLK_T_FLUSH) {
-		/* Flush */
-		ret = fdatasync(vblk->fd);
-		verbose("FLUSH fdatasync: %i\n", ret);
-		wlen = sizeof(*in);
-		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
-	} else {
-		/*
-		 * Read
-		 *
-		 * Move to the right location in the block file.  This can fail
-		 * if they try to read past end.
-		 */
-		if (lseek64(vblk->fd, off, SEEK_SET) != off)
-			err(1, "Bad seek to sector %llu", out->sector);
-
-		ret = readv(vblk->fd, iov+1, in_num-1);
-		verbose("READ from sector %llu: %i\n", out->sector, ret);
-		if (ret >= 0) {
-			wlen = sizeof(*in) + ret;
-			*in = VIRTIO_BLK_S_OK;
-		} else {
-			wlen = sizeof(*in);
-			*in = VIRTIO_BLK_S_IOERR;
-		}
-	}
-
-	/* Finished that request. */
-	add_used(vq, head, wlen);
-}
-
-/*L:198 This actually sets up a virtual block device. */
-static void setup_block_file(const char *filename)
-{
-	struct device *dev;
-	struct vblk_info *vblk;
-	struct virtio_blk_config conf;
-
-	/* Creat the device. */
-	dev = new_device("block", VIRTIO_ID_BLOCK);
-
-	/* The device has one virtqueue, where the Guest places requests. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, blk_request);
-
-	/* Allocate the room for our own bookkeeping */
-	vblk = dev->priv = malloc(sizeof(*vblk));
-
-	/* First we open the file and store the length. */
-	vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE);
-	vblk->len = lseek64(vblk->fd, 0, SEEK_END);
-
-	/* We support FLUSH. */
-	add_feature(dev, VIRTIO_BLK_F_FLUSH);
-
-	/* Tell Guest how many sectors this device has. */
-	conf.capacity = cpu_to_le64(vblk->len / 512);
-
-	/*
-	 * Tell Guest not to put in too many descriptors at once: two are used
-	 * for the in and out elements.
-	 */
-	add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
-	conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
-
-	/* Don't try to put whole struct: we have 8 bit limit. */
-	set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
-
-	verbose("device %u: virtblock %llu sectors\n",
-		++devices.device_num, le64_to_cpu(conf.capacity));
-}
-
-/*L:211
- * Our random number generator device reads from /dev/random into the Guest's
- * input buffers.  The usual case is that the Guest doesn't want random numbers
- * and so has no buffers although /dev/random is still readable, whereas
- * console is the reverse.
- *
- * The same logic applies, however.
- */
-struct rng_info {
-	int rfd;
-};
-
-static void rng_input(struct virtqueue *vq)
-{
-	int len;
-	unsigned int head, in_num, out_num, totlen = 0;
-	struct rng_info *rng_info = vq->dev->priv;
-	struct iovec iov[vq->vring.num];
-
-	/* First we need a buffer from the Guests's virtqueue. */
-	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
-	if (out_num)
-		errx(1, "Output buffers in rng?");
-
-	/*
-	 * Just like the console write, we loop to cover the whole iovec.
-	 * In this case, short reads actually happen quite a bit.
-	 */
-	while (!iov_empty(iov, in_num)) {
-		len = readv(rng_info->rfd, iov, in_num);
-		if (len <= 0)
-			err(1, "Read from /dev/random gave %i", len);
-		iov_consume(iov, in_num, len);
-		totlen += len;
-	}
-
-	/* Tell the Guest about the new input. */
-	add_used(vq, head, totlen);
-}
-
-/*L:199
- * This creates a "hardware" random number device for the Guest.
- */
-static void setup_rng(void)
-{
-	struct device *dev;
-	struct rng_info *rng_info = malloc(sizeof(*rng_info));
-
-	/* Our device's privat info simply contains the /dev/random fd. */
-	rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
-
-	/* Create the new device. */
-	dev = new_device("rng", VIRTIO_ID_RNG);
-	dev->priv = rng_info;
-
-	/* The device has one virtqueue, where the Guest places inbufs. */
-	add_virtqueue(dev, VIRTQUEUE_NUM, rng_input);
-
-	verbose("device %u: rng\n", devices.device_num++);
-}
-/* That's the end of device setup. */
-
-/*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
-static void __attribute__((noreturn)) restart_guest(void)
-{
-	unsigned int i;
-
-	/*
-	 * Since we don't track all open fds, we simply close everything beyond
-	 * stderr.
-	 */
-	for (i = 3; i < FD_SETSIZE; i++)
-		close(i);
-
-	/* Reset all the devices (kills all threads). */
-	cleanup_devices();
-
-	execv(main_args[0], main_args);
-	err(1, "Could not exec %s", main_args[0]);
-}
-
-/*L:220
- * Finally we reach the core of the Launcher which runs the Guest, serves
- * its input and output, and finally, lays it to rest.
- */
-static void __attribute__((noreturn)) run_guest(void)
-{
-	for (;;) {
-		unsigned long notify_addr;
-		int readval;
-
-		/* We read from the /dev/lguest device to run the Guest. */
-		readval = pread(lguest_fd, &notify_addr,
-				sizeof(notify_addr), cpu_id);
-
-		/* One unsigned long means the Guest did HCALL_NOTIFY */
-		if (readval == sizeof(notify_addr)) {
-			verbose("Notify on address %#lx\n", notify_addr);
-			handle_output(notify_addr);
-		/* ENOENT means the Guest died.  Reading tells us why. */
-		} else if (errno == ENOENT) {
-			char reason[1024] = { 0 };
-			pread(lguest_fd, reason, sizeof(reason)-1, cpu_id);
-			errx(1, "%s", reason);
-		/* ERESTART means that we need to reboot the guest */
-		} else if (errno == ERESTART) {
-			restart_guest();
-		/* Anything else means a bug or incompatible change. */
-		} else
-			err(1, "Running guest failed");
-	}
-}
-/*L:240
- * This is the end of the Launcher.  The good news: we are over halfway
- * through!  The bad news: the most fiendish part of the code still lies ahead
- * of us.
- *
-