| * Powerventure Semiconductor PV88080 Voltage Regulator |
| |
| Required properties: |
| - compatible: "pvs,pv88080". |
| - reg: I2C slave address, usually 0x49. |
| - interrupts: the interrupt outputs of the controller |
| - regulators: A node that houses a sub-node for each regulator within the |
| device. Each sub-node is identified using the node's name, with valid |
| values listed below. The content of each sub-node is defined by the |
| standard binding for regulators; see regulator.txt. |
| BUCK1, BUCK2, and BUCK3. |
| |
| Optional properties: |
| - Any optional property defined in regulator.txt |
| |
| Example |
| |
| pmic: pv88080@49 { |
| compatible = "pvs,pv88080"; |
| reg = <0x49>; |
| interrupt-parent = <&gpio>; |
| interrupts = <24 24>; |
| |
| regulators { |
| BUCK1 { |
| regulator-name = "buck1"; |
| regulator-min-microvolt = < 600000>; |
| regulator-max-microvolt = <1393750>; |
| regulator-min-microamp = < 220000>; |
| regulator-max-microamp = <7040000>; |
| }; |
| |
| BUCK2 { |
| regulator-name = "buck2"; |
| regulator-min-microvolt = < 600000>; |
| regulator-max-microvolt = <1393750>; |
| regulator-min-microamp = <1496000>; |
| regulator-max-microamp = <4189000>; |
| }; |
| |
| BUCK3 { |
| regulator-name = "buck3"; |
| regulator-min-microvolt = <1400000>; |
| regulator-max-microvolt = <2193750>; |
| regulator-min-microamp = <1496000>; |
| regulator-max-microamp = <4189000>; |
| }; |
| }; |
| }; |
