Merge branch 'pm-fixes' of git://github.com/rjwysocki/linux-pm

* 'pm-fixes' of git://github.com/rjwysocki/linux-pm:
  PM / Clocks: Do not acquire a mutex under a spinlock
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index fa8776a..84d46c0 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -35,13 +35,6 @@
 All Sysfs entries are named with their core_id (represented here by 'X').
 tempX_input	 - Core temperature (in millidegrees Celsius).
 tempX_max	 - All cooling devices should be turned on (on Core2).
-		   Initialized with IA32_THERM_INTERRUPT. When the CPU
-		   temperature reaches this temperature, an interrupt is
-		   generated and tempX_max_alarm is set.
-tempX_max_hyst   - If the CPU temperature falls below than temperature,
-		   an interrupt is generated and tempX_max_alarm is reset.
-tempX_max_alarm  - Set if the temperature reaches or exceeds tempX_max.
-		   Reset if the temperature drops to or below tempX_max_hyst.
 tempX_crit	 - Maximum junction temperature (in millidegrees Celsius).
 tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
 		   Correct CPU operation is no longer guaranteed.
@@ -49,9 +42,10 @@
 		   number. For Package temp, this will be "Physical id Y",
 		   where Y is the package number.
 
-The TjMax temperature is set to 85 degrees C if undocumented model specific
-register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
-(sometimes) documented in processor datasheet.
+On CPU models which support it, TjMax is read from a model-specific register.
+On other models, it is set to an arbitrary value based on weak heuristics.
+If these heuristics don't work for you, you can pass the correct TjMax value
+as a module parameter (tjmax).
 
 Appendix A. Known TjMax lists (TBD):
 Some information comes from ark.intel.com
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3269576..3146ed3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1283,6 +1283,20 @@
 	  processor into full low interrupt latency mode. ARM11MPCore
 	  is not affected.
 
+config ARM_ERRATA_764369
+	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for erratum 764369
+	  affecting Cortex-A9 MPCore with two or more processors (all
+	  current revisions). Under certain timing circumstances, a data
+	  cache line maintenance operation by MVA targeting an Inner
+	  Shareable memory region may fail to proceed up to either the
+	  Point of Coherency or to the Point of Unification of the
+	  system. This workaround adds a DSB instruction before the
+	  relevant cache maintenance functions and sets a specific bit
+	  in the diagnostic control register of the SCU.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 8c73900..253cc86 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -25,17 +25,17 @@
 
 #ifdef CONFIG_SMP
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	smp_mb();						\
 	__asm__ __volatile__(					\
-	"1:	ldrex	%1, [%2]\n"				\
+	"1:	ldrex	%1, [%3]\n"				\
 	"	" insn "\n"					\
-	"2:	strex	%1, %0, [%2]\n"				\
-	"	teq	%1, #0\n"				\
+	"2:	strex	%2, %0, [%3]\n"				\
+	"	teq	%2, #0\n"				\
 	"	bne	1b\n"					\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -73,14 +73,14 @@
 #include <linux/preempt.h>
 #include <asm/domain.h>
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%2]\n"			\
+	"1:	" T(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%2]\n"			\
+	"2:	" T(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -117,7 +117,7 @@
 	int cmp = (encoded_op >> 24) & 15;
 	int oparg = (encoded_op << 8) >> 20;
 	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
+	int oldval = 0, ret, tmp;
 
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
 		oparg = 1 << oparg;
@@ -129,19 +129,19 @@
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("mov	%0, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("add	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
-		__futex_atomic_op("orr	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("orr	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3", ret, oldval, uaddr, ~oparg);
+		__futex_atomic_op("and	%0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
 		break;
 	case FUTEX_OP_XOR:
-		__futex_atomic_op("eor	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("eor	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 2c04ed5..c60a294 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -478,8 +478,8 @@
 /*
  * Unimplemented (or alternatively implemented) syscalls
  */
-#define __IGNORE_fadvise64_64		1
-#define __IGNORE_migrate_pages		1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 79ed5e7..7fcddb7 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -13,6 +13,7 @@
 
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 
 #define SCU_CTRL		0x00
 #define SCU_CONFIG		0x04
@@ -37,6 +38,15 @@
 {
 	u32 scu_ctrl;
 
+#ifdef CONFIG_ARM_ERRATA_764369
+	/* Cortex-A9 only */
+	if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+		scu_ctrl = __raw_readl(scu_base + 0x30);
+		if (!(scu_ctrl & 1))
+			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+	}
+#endif
+
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index bf977f8..4e66f62 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -23,8 +23,10 @@
 
 #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
 #define ARM_EXIT_KEEP(x)	x
+#define ARM_EXIT_DISCARD(x)
 #else
 #define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
 #endif
 
 OUTPUT_ARCH(arm)
@@ -39,6 +41,11 @@
 SECTIONS
 {
 	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
 	 * unwind exit sections must be discarded before the rest of the
 	 * unwind sections get included.
 	 */
@@ -47,6 +54,9 @@
 		*(.ARM.extab.exit.text)
 		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
 		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
 #ifndef CONFIG_HOTPLUG
 		*(.ARM.exidx.devexit.text)
 		*(.ARM.extab.devexit.text)
@@ -58,6 +68,8 @@
 #ifndef CONFIG_SMP_ON_UP
 		*(.alt.smp.init)
 #endif
+		*(.discard)
+		*(.discard.*)
 	}
 
 #ifdef CONFIG_XIP_KERNEL
@@ -279,9 +291,6 @@
 
 	STABS_DEBUG
 	.comment 0 : { *(.comment) }
-
-	/* Default discards */
-	DISCARDS
 }
 
 /*
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 79d6cd0..86964d2 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -899,8 +899,7 @@
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 16),
 		},
@@ -909,8 +908,7 @@
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 20),
 		},
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index a1a7176..38058af 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -128,7 +128,7 @@
 		unsigned long clkcon0;
 
 		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
 		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
 		__raw_writel(clkcon0, S3C2443_CLKDIV0);
 	}
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 52a8e60..f5f8fa8 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -815,8 +815,7 @@
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 3),
 		},
@@ -825,8 +824,7 @@
 		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 4),
 		},
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 3b24bfa..07c4bc8 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -174,6 +174,10 @@
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
  USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
 	add	r12, r12, r2
@@ -223,6 +227,10 @@
 	add	r1, r0, r1
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
 	add	r0, r0, r2
@@ -247,6 +255,10 @@
 	sub	r3, r2, #1
 	tst	r0, r3
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 
 	tst	r1, r3
@@ -270,6 +282,10 @@
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D / U line
 	add	r0, r0, r2
@@ -288,6 +304,10 @@
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 	add	r0, r0, r2
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 0a0a1e7..c3ff82f 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -324,6 +324,8 @@
 
 	if (addr)
 		*handle = pfn_to_dma(dev, page_to_pfn(page));
+	else
+		__dma_free_buffer(page, size);
 
 	return addr;
 }
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f71078e..f88216d 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -114,17 +114,18 @@
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
-	struct s5p_gpioint_bank *bank = NULL;
+	struct s5p_gpioint_bank *b, *bank = NULL;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
 		return -ENOMEM;
 
-	list_for_each_entry(bank, &banks, list) {
-		if (group >= bank->start &&
-		    group < bank->start + bank->nr_groups)
+	list_for_each_entry(b, &banks, list) {
+		if (group >= b->start && group < b->start + b->nr_groups) {
+			bank = b;
 			break;
+		}
 	}
 	if (!bank)
 		return -EINVAL;
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 6f08bc9..8b4cc5f 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3603,7 +3603,7 @@
 		break;
 	case Src2CL:
 		ctxt->src2.bytes = 1;
-		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8;
+		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
 		break;
 	case Src2ImmByte:
 		rc = decode_imm(ctxt, &ctxt->src2, 1, true);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 1c5b693..8e8da79 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -400,7 +400,8 @@
 
 	/* xchg acts as a barrier before the setting of the high bits */
 	orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low);
-	orig.spte_high = ssptep->spte_high = sspte.spte_high;
+	orig.spte_high = ssptep->spte_high;
+	ssptep->spte_high = sspte.spte_high;
 	count_spte_clear(sptep, spte);
 
 	return orig.spte;
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 4112576..44b2391 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -36,17 +36,25 @@
 #include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
+#include <linux/moduleparam.h>
 #include <asm/msr.h>
 #include <asm/processor.h>
 
 #define DRVNAME	"coretemp"
 
+/*
+ * force_tjmax only matters when TjMax can't be read from the CPU itself.
+ * When set, it replaces the driver's suboptimal heuristic.
+ */
+static int force_tjmax;
+module_param_named(tjmax, force_tjmax, int, 0444);
+MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
+
 #define BASE_SYSFS_ATTR_NO	2	/* Sysfs Base attr no for coretemp */
 #define NUM_REAL_CORES		16	/* Number of Real cores per cpu */
 #define CORETEMP_NAME_LENGTH	17	/* String Length of attrs */
 #define MAX_CORE_ATTRS		4	/* Maximum no of basic attrs */
-#define MAX_THRESH_ATTRS	3	/* Maximum no of Threshold attrs */
-#define TOTAL_ATTRS		(MAX_CORE_ATTRS + MAX_THRESH_ATTRS)
+#define TOTAL_ATTRS		(MAX_CORE_ATTRS + 1)
 #define MAX_CORE_DATA		(NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
 
 #ifdef CONFIG_SMP
@@ -69,8 +77,6 @@
  *		This value is passed as "id" field to rdmsr/wrmsr functions.
  * @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS,
  *		from where the temperature values should be read.
- * @intrpt_reg: One of IA32_THERM_INTERRUPT or IA32_PACKAGE_THERM_INTERRUPT,
- *		from where the thresholds are read.
  * @attr_size:  Total number of pre-core attrs displayed in the sysfs.
  * @is_pkg_data: If this is 1, the temp_data holds pkgtemp data.
  *		Otherwise, temp_data holds coretemp data.
@@ -79,13 +85,11 @@
 struct temp_data {
 	int temp;
 	int ttarget;
-	int tmin;
 	int tjmax;
 	unsigned long last_updated;
 	unsigned int cpu;
 	u32 cpu_core_id;
 	u32 status_reg;
-	u32 intrpt_reg;
 	int attr_size;
 	bool is_pkg_data;
 	bool valid;
@@ -143,19 +147,6 @@
 	return sprintf(buf, "%d\n", (eax >> 5) & 1);
 }
 
-static ssize_t show_max_alarm(struct device *dev,
-				struct device_attribute *devattr, char *buf)
-{
-	u32 eax, edx;
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct platform_data *pdata = dev_get_drvdata(dev);
-	struct temp_data *tdata = pdata->core_data[attr->index];
-
-	rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx);
-
-	return sprintf(buf, "%d\n", !!(eax & THERM_STATUS_THRESHOLD1));
-}
-
 static ssize_t show_tjmax(struct device *dev,
 			struct device_attribute *devattr, char *buf)
 {
@@ -174,83 +165,6 @@
 	return sprintf(buf, "%d\n", pdata->core_data[attr->index]->ttarget);
 }
 
-static ssize_t store_ttarget(struct device *dev,
-				struct device_attribute *devattr,
-				const char *buf, size_t count)
-{
-	struct platform_data *pdata = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct temp_data *tdata = pdata->core_data[attr->index];
-	u32 eax, edx;
-	unsigned long val;
-	int diff;
-
-	if (strict_strtoul(buf, 10, &val))
-		return -EINVAL;
-
-	/*
-	 * THERM_MASK_THRESHOLD1 is 7 bits wide. Values are entered in terms
-	 * of milli degree celsius. Hence don't accept val > (127 * 1000)
-	 */
-	if (val > tdata->tjmax || val > 127000)
-		return -EINVAL;
-
-	diff = (tdata->tjmax - val) / 1000;
-
-	mutex_lock(&tdata->update_lock);
-	rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
-	eax = (eax & ~THERM_MASK_THRESHOLD1) |
-				(diff << THERM_SHIFT_THRESHOLD1);
-	wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
-	tdata->ttarget = val;
-	mutex_unlock(&tdata->update_lock);
-
-	return count;
-}
-
-static ssize_t show_tmin(struct device *dev,
-			struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct platform_data *pdata = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%d\n", pdata->core_data[attr->index]->tmin);
-}
-
-static ssize_t store_tmin(struct device *dev,
-				struct device_attribute *devattr,
-				const char *buf, size_t count)
-{
-	struct platform_data *pdata = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct temp_data *tdata = pdata->core_data[attr->index];
-	u32 eax, edx;
-	unsigned long val;
-	int diff;
-
-	if (strict_strtoul(buf, 10, &val))
-		return -EINVAL;
-
-	/*
-	 * THERM_MASK_THRESHOLD0 is 7 bits wide. Values are entered in terms
-	 * of milli degree celsius. Hence don't accept val > (127 * 1000)
-	 */
-	if (val > tdata->tjmax || val > 127000)
-		return -EINVAL;
-
-	diff = (tdata->tjmax - val) / 1000;
-
-	mutex_lock(&tdata->update_lock);
-	rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
-	eax = (eax & ~THERM_MASK_THRESHOLD0) |
-				(diff << THERM_SHIFT_THRESHOLD0);
-	wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
-	tdata->tmin = val;
-	mutex_unlock(&tdata->update_lock);
-
-	return count;
-}
-
 static ssize_t show_temp(struct device *dev,
 			struct device_attribute *devattr, char *buf)
 {
@@ -374,7 +288,6 @@
 
 static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 {
-	/* The 100C is default for both mobile and non mobile CPUs */
 	int err;
 	u32 eax, edx;
 	u32 val;
@@ -385,7 +298,8 @@
 	 */
 	err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
 	if (err) {
-		dev_warn(dev, "Unable to read TjMax from CPU.\n");
+		if (c->x86_model > 0xe && c->x86_model != 0x1c)
+			dev_warn(dev, "Unable to read TjMax from CPU %u\n", id);
 	} else {
 		val = (eax >> 16) & 0xff;
 		/*
@@ -393,11 +307,17 @@
 		 * will be used
 		 */
 		if (val) {
-			dev_info(dev, "TjMax is %d C.\n", val);
+			dev_dbg(dev, "TjMax is %d degrees C\n", val);
 			return val * 1000;
 		}
 	}
 
+	if (force_tjmax) {
+		dev_notice(dev, "TjMax forced to %d degrees C by user\n",
+			   force_tjmax);
+		return force_tjmax * 1000;
+	}
+
 	/*
 	 * An assumption is made for early CPUs and unreadable MSR.
 	 * NOTE: the calculated value may not be correct.
@@ -414,21 +334,6 @@
 	rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx);
 }
 
-static int get_pkg_tjmax(unsigned int cpu, struct device *dev)
-{
-	int err;
-	u32 eax, edx, val;
-
-	err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
-	if (!err) {
-		val = (eax >> 16) & 0xff;
-		if (val)
-			return val * 1000;
-	}
-	dev_warn(dev, "Unable to read Pkg-TjMax from CPU:%u\n", cpu);
-	return 100000; /* Default TjMax: 100 degree celsius */
-}
-
 static int create_name_attr(struct platform_data *pdata, struct device *dev)
 {
 	sysfs_attr_init(&pdata->name_attr.attr);
@@ -442,19 +347,14 @@
 				int attr_no)
 {
 	int err, i;
-	static ssize_t (*rd_ptr[TOTAL_ATTRS]) (struct device *dev,
+	static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev,
 			struct device_attribute *devattr, char *buf) = {
 			show_label, show_crit_alarm, show_temp, show_tjmax,
-			show_max_alarm, show_ttarget, show_tmin };
-	static ssize_t (*rw_ptr[TOTAL_ATTRS]) (struct device *dev,
-			struct device_attribute *devattr, const char *buf,
-			size_t count) = { NULL, NULL, NULL, NULL, NULL,
-					store_ttarget, store_tmin };
-	static const char *names[TOTAL_ATTRS] = {
+			show_ttarget };
+	static const char *const names[TOTAL_ATTRS] = {
 					"temp%d_label", "temp%d_crit_alarm",
 					"temp%d_input", "temp%d_crit",
-					"temp%d_max_alarm", "temp%d_max",
-					"temp%d_max_hyst" };
+					"temp%d_max" };
 
 	for (i = 0; i < tdata->attr_size; i++) {
 		snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i],
@@ -462,10 +362,6 @@
 		sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr);
 		tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i];
 		tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO;
-		if (rw_ptr[i]) {
-			tdata->sd_attrs[i].dev_attr.attr.mode |= S_IWUSR;
-			tdata->sd_attrs[i].dev_attr.store = rw_ptr[i];
-		}
 		tdata->sd_attrs[i].dev_attr.show = rd_ptr[i];
 		tdata->sd_attrs[i].index = attr_no;
 		err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr);
@@ -538,8 +434,6 @@
 
 	tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS :
 							MSR_IA32_THERM_STATUS;
-	tdata->intrpt_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_INTERRUPT :
-						MSR_IA32_THERM_INTERRUPT;
 	tdata->is_pkg_data = pkg_flag;
 	tdata->cpu = cpu;
 	tdata->cpu_core_id = TO_CORE_ID(cpu);
@@ -548,11 +442,11 @@
 	return tdata;
 }
 
-static int create_core_data(struct platform_data *pdata,
-				struct platform_device *pdev,
+static int create_core_data(struct platform_device *pdev,
 				unsigned int cpu, int pkg_flag)
 {
 	struct temp_data *tdata;
+	struct platform_data *pdata = platform_get_drvdata(pdev);
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	u32 eax, edx;
 	int err, attr_no;
@@ -588,25 +482,21 @@
 		goto exit_free;
 
 	/* We can access status register. Get Critical Temperature */
-	if (pkg_flag)
-		tdata->tjmax = get_pkg_tjmax(pdev->id, &pdev->dev);
-	else
-		tdata->tjmax = get_tjmax(c, cpu, &pdev->dev);
+	tdata->tjmax = get_tjmax(c, cpu, &pdev->dev);
 
 	/*
-	 * Test if we can access the intrpt register. If so, increase the
-	 * 'size' enough to have ttarget/tmin/max_alarm interfaces.
-	 * Initialize ttarget with bits 16:22 of MSR_IA32_THERM_INTERRUPT
+	 * Read the still undocumented bits 8:15 of IA32_TEMPERATURE_TARGET.
+	 * The target temperature is available on older CPUs but not in this
+	 * register. Atoms don't have the register at all.
 	 */
-	err = rdmsr_safe_on_cpu(cpu, tdata->intrpt_reg, &eax, &edx);
-	if (!err) {
-		tdata->attr_size += MAX_THRESH_ATTRS;
-		tdata->tmin = tdata->tjmax -
-			      ((eax & THERM_MASK_THRESHOLD0) >>
-			       THERM_SHIFT_THRESHOLD0) * 1000;
-		tdata->ttarget = tdata->tjmax -
-				 ((eax & THERM_MASK_THRESHOLD1) >>
-				  THERM_SHIFT_THRESHOLD1) * 1000;
+	if (c->x86_model > 0xe && c->x86_model != 0x1c) {
+		err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET,
+					&eax, &edx);
+		if (!err) {
+			tdata->ttarget
+			  = tdata->tjmax - ((eax >> 8) & 0xff) * 1000;
+			tdata->attr_size++;
+		}
 	}
 
 	pdata->core_data[attr_no] = tdata;
@@ -624,16 +514,13 @@
 
 static void coretemp_add_core(unsigned int cpu, int pkg_flag)
 {
-	struct platform_data *pdata;
 	struct platform_device *pdev = coretemp_get_pdev(cpu);
 	int err;
 
 	if (!pdev)
 		return;
 
-	pdata = platform_get_drvdata(pdev);
-
-	err = create_core_data(pdata, pdev, cpu, pkg_flag);
+	err = create_core_data(pdev, cpu, pkg_flag);
 	if (err)
 		dev_err(&pdev->dev, "Adding Core %u failed\n", cpu);
 }
@@ -671,7 +558,7 @@
 	if (err)
 		goto exit_free;
 
-	pdata->phys_proc_id = TO_PHYS_ID(pdev->id);
+	pdata->phys_proc_id = pdev->id;
 	platform_set_drvdata(pdev, pdata);
 
 	pdata->hwmon_dev = hwmon_device_register(&pdev->dev);
@@ -723,7 +610,7 @@
 
 	mutex_lock(&pdev_list_mutex);
 
-	pdev = platform_device_alloc(DRVNAME, cpu);
+	pdev = platform_device_alloc(DRVNAME, TO_PHYS_ID(cpu));
 	if (!pdev) {
 		err = -ENOMEM;
 		pr_err("Device allocation failed\n");
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
index 257957c..4f7c3fc 100644
--- a/drivers/hwmon/ds620.c
+++ b/drivers/hwmon/ds620.c
@@ -72,7 +72,7 @@
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
-	u16 temp[3];		/* Register values, word */
+	s16 temp[3];		/* Register values, word */
 };
 
 /*
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 17cf1ab..8c2844e 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -329,8 +329,8 @@
 			  struct i2c_board_info *info);
 static int w83791d_remove(struct i2c_client *client);
 
-static int w83791d_read(struct i2c_client *client, u8 register);
-static int w83791d_write(struct i2c_client *client, u8 register, u8 value);
+static int w83791d_read(struct i2c_client *client, u8 reg);
+static int w83791d_write(struct i2c_client *client, u8 reg, u8 value);
 static struct w83791d_data *w83791d_update_device(struct device *dev);
 
 #ifdef DEBUG
diff --git a/fs/namei.c b/fs/namei.c
index f478836..0b3138d 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -721,12 +721,6 @@
 	if (!path->dentry->d_op || !path->dentry->d_op->d_automount)
 		return -EREMOTE;
 
-	/* We don't want to mount if someone supplied AT_NO_AUTOMOUNT
-	 * and this is the terminal part of the path.
-	 */
-	if ((flags & LOOKUP_NO_AUTOMOUNT) && !(flags & LOOKUP_PARENT))
-		return -EISDIR; /* we actually want to stop here */
-
 	/* We don't want to mount if someone's just doing a stat -
 	 * unless they're stat'ing a directory and appended a '/' to
 	 * the name.
@@ -739,7 +733,7 @@
 	 * of the daemon to instantiate them before they can be used.
 	 */
 	if (!(flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY |
-		     LOOKUP_OPEN | LOOKUP_CREATE)) &&
+		     LOOKUP_OPEN | LOOKUP_CREATE | LOOKUP_AUTOMOUNT)) &&
 	    path->dentry->d_inode)
 		return -EISDIR;
 
diff --git a/fs/namespace.c b/fs/namespace.c
index 22bfe82..b4febb2 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1757,7 +1757,7 @@
 		return err;
 	if (!old_name || !*old_name)
 		return -EINVAL;
-	err = kern_path(old_name, LOOKUP_FOLLOW, &old_path);
+	err = kern_path(old_name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &old_path);
 	if (err)
 		return err;
 
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 9b7dd70..5b19b6a 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2798,7 +2798,7 @@
 		goto out_put_mnt_ns;
 
 	ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt,
-			export_path, LOOKUP_FOLLOW, &path);
+			export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
 
 	nfs_referral_loop_unprotect();
 	put_mnt_ns(ns_private);
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index b34bdb2..10b6be3 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -355,7 +355,7 @@
 	 * resolution (think about autofs) and thus deadlocks could arise.
 	 */
 	if (cmds == Q_QUOTAON) {
-		ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW, &path);
+		ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
 		if (ret)
 			pathp = ERR_PTR(ret);
 		else
diff --git a/fs/stat.c b/fs/stat.c
index ba5316f..78a3aa8 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -81,8 +81,6 @@
 
 	if (!(flag & AT_SYMLINK_NOFOLLOW))
 		lookup_flags |= LOOKUP_FOLLOW;
-	if (flag & AT_NO_AUTOMOUNT)
-		lookup_flags |= LOOKUP_NO_AUTOMOUNT;
 	if (flag & AT_EMPTY_PATH)
 		lookup_flags |= LOOKUP_EMPTY;
 
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 76fe2c6..409328d 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -48,11 +48,12 @@
  */
 #define LOOKUP_FOLLOW		0x0001
 #define LOOKUP_DIRECTORY	0x0002
+#define LOOKUP_AUTOMOUNT	0x0004
 
 #define LOOKUP_PARENT		0x0010
 #define LOOKUP_REVAL		0x0020
 #define LOOKUP_RCU		0x0040
-#define LOOKUP_NO_AUTOMOUNT	0x0080
+
 /*
  * Intent data
  */