blob: 0dfa8a81436e80ebd325d1722caa791d5193936e [file] [log] [blame]
/*
* Intel MIC Platform Software Stack (MPSS)
*
* Copyright(c) 2013 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Intel MIC Host driver.
*
*/
#include <linux/fs.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/firmware.h>
#include <linux/delay.h>
#include "../common/mic_dev.h"
#include "mic_device.h"
#include "mic_x100.h"
#include "mic_smpt.h"
/**
* mic_x100_write_spad - write to the scratchpad register
* @mdev: pointer to mic_device instance
* @idx: index to the scratchpad register, 0 based
* @val: the data value to put into the register
*
* This function allows writing of a 32bit value to the indexed scratchpad
* register.
*
* RETURNS: none.
*/
static void
mic_x100_write_spad(struct mic_device *mdev, unsigned int idx, u32 val)
{
dev_dbg(mdev->sdev->parent, "Writing 0x%x to scratch pad index %d\n",
val, idx);
mic_mmio_write(&mdev->mmio, val,
MIC_X100_SBOX_BASE_ADDRESS +
MIC_X100_SBOX_SPAD0 + idx * 4);
}
/**
* mic_x100_read_spad - read from the scratchpad register
* @mdev: pointer to mic_device instance
* @idx: index to scratchpad register, 0 based
*
* This function allows reading of the 32bit scratchpad register.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
static u32
mic_x100_read_spad(struct mic_device *mdev, unsigned int idx)
{
u32 val = mic_mmio_read(&mdev->mmio,
MIC_X100_SBOX_BASE_ADDRESS +
MIC_X100_SBOX_SPAD0 + idx * 4);
dev_dbg(mdev->sdev->parent,
"Reading 0x%x from scratch pad index %d\n", val, idx);
return val;
}
/**
* mic_x100_enable_interrupts - Enable interrupts.
* @mdev: pointer to mic_device instance
*/
static void mic_x100_enable_interrupts(struct mic_device *mdev)
{
u32 reg;
struct mic_mw *mw = &mdev->mmio;
u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
reg = mic_mmio_read(mw, sice0);
reg |= MIC_X100_SBOX_DBR_BITS(0xf) | MIC_X100_SBOX_DMA_BITS(0xff);
mic_mmio_write(mw, reg, sice0);
/*
* Enable auto-clear when enabling interrupts. Applicable only for
* MSI-x. Legacy and MSI mode cannot have auto-clear enabled.
*/
if (mdev->irq_info.num_vectors > 1) {
reg = mic_mmio_read(mw, siac0);
reg |= MIC_X100_SBOX_DBR_BITS(0xf) |
MIC_X100_SBOX_DMA_BITS(0xff);
mic_mmio_write(mw, reg, siac0);
}
}
/**
* mic_x100_disable_interrupts - Disable interrupts.
* @mdev: pointer to mic_device instance
*/
static void mic_x100_disable_interrupts(struct mic_device *mdev)
{
u32 reg;
struct mic_mw *mw = &mdev->mmio;
u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0;
u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0;
u32 sicc0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICC0;
reg = mic_mmio_read(mw, sice0);
mic_mmio_write(mw, reg, sicc0);
if (mdev->irq_info.num_vectors > 1) {
reg = mic_mmio_read(mw, siac0);
reg &= ~(MIC_X100_SBOX_DBR_BITS(0xf) |
MIC_X100_SBOX_DMA_BITS(0xff));
mic_mmio_write(mw, reg, siac0);
}
}
/**
* mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC.
* @mdev: pointer to mic_device instance
*/
static void mic_x100_send_sbox_intr(struct mic_device *mdev,
int doorbell)
{
struct mic_mw *mw = &mdev->mmio;
u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8;
u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS +
apic_icr_offset);
/* for MIC we need to make sure we "hit" the send_icr bit (13) */
apicicr_low = (apicicr_low | (1 << 13));
/* Ensure that the interrupt is ordered w.r.t. previous stores. */
wmb();
mic_mmio_write(mw, apicicr_low,
MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
}
/**
* mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC.
* @mdev: pointer to mic_device instance
*/
static void mic_x100_send_rdmasr_intr(struct mic_device *mdev,
int doorbell)
{
int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2);
/* Ensure that the interrupt is ordered w.r.t. previous stores. */
wmb();
mic_mmio_write(&mdev->mmio, 0,
MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset);
}
/**
* __mic_x100_send_intr - Send interrupt to MIC.
* @mdev: pointer to mic_device instance
* @doorbell: doorbell number.
*/
static void mic_x100_send_intr(struct mic_device *mdev, int doorbell)
{
int rdmasr_db;
if (doorbell < MIC_X100_NUM_SBOX_IRQ) {
mic_x100_send_sbox_intr(mdev, doorbell);
} else {
rdmasr_db = doorbell - MIC_X100_NUM_SBOX_IRQ +
MIC_X100_RDMASR_IRQ_BASE;
mic_x100_send_rdmasr_intr(mdev, rdmasr_db);
}
}
/**
* mic_ack_interrupt - Device specific interrupt handling.
* @mdev: pointer to mic_device instance
*
* Returns: bitmask of doorbell events triggered.
*/
static u32 mic_x100_ack_interrupt(struct mic_device *mdev)
{
u32 reg = 0;
struct mic_mw *mw = &mdev->mmio;
u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0;
/* Clear pending bit array. */
if (MIC_A0_STEP == mdev->stepping)
mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS +
MIC_X100_SBOX_MSIXPBACR);
if (mdev->irq_info.num_vectors <= 1) {
reg = mic_mmio_read(mw, sicr0);
if (unlikely(!reg))
goto done;
mic_mmio_write(mw, reg, sicr0);
}
if (mdev->stepping >= MIC_B0_STEP)
mdev->intr_ops->enable_interrupts(mdev);
done:
return reg;
}
/**
* mic_x100_hw_intr_init - Initialize h/w specific interrupt
* information.
* @mdev: pointer to mic_device instance
*/
static void mic_x100_hw_intr_init(struct mic_device *mdev)
{
mdev->intr_info = (struct mic_intr_info *)mic_x100_intr_init;
}
/**
* mic_x100_read_msi_to_src_map - read from the MSI mapping registers
* @mdev: pointer to mic_device instance
* @idx: index to the mapping register, 0 based
*
* This function allows reading of the 32bit MSI mapping register.
*
* RETURNS: The value in the register.
*/
static u32
mic_x100_read_msi_to_src_map(struct mic_device *mdev, int idx)
{
return mic_mmio_read(&mdev->mmio,
MIC_X100_SBOX_BASE_ADDRESS +
MIC_X100_SBOX_MXAR0 + idx * 4);
}
/**
* mic_x100_program_msi_to_src_map - program the MSI mapping registers
* @mdev: pointer to mic_device instance
* @idx: index to the mapping register, 0 based
* @offset: The bit offset in the register that needs to be updated.
* @set: boolean specifying if the bit in the specified offset needs
* to be set or cleared.
*
* RETURNS: None.
*/
static void
mic_x100_program_msi_to_src_map(struct mic_device *mdev,
int idx, int offset, bool set)
{
unsigned long reg;
struct mic_mw *mw = &mdev->mmio;
u32 mxar = MIC_X100_SBOX_BASE_ADDRESS +
MIC_X100_SBOX_MXAR0 + idx * 4;
reg = mic_mmio_read(mw, mxar);
if (set)
__set_bit(offset, &reg);
else
__clear_bit(offset, &reg);
mic_mmio_write(mw, reg, mxar);
}
/*
* mic_x100_reset_fw_ready - Reset Firmware ready status field.
* @mdev: pointer to mic_device instance
*/
static void mic_x100_reset_fw_ready(struct mic_device *mdev)
{
mdev->ops->write_spad(mdev, MIC_X100_DOWNLOAD_INFO, 0);
}
/*
* mic_x100_is_fw_ready - Check if firmware is ready.
* @mdev: pointer to mic_device instance
*/
static bool mic_x100_is_fw_ready(struct mic_device *mdev)
{
u32 scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
return MIC_X100_SPAD2_DOWNLOAD_STATUS(scratch2) ? true : false;
}
/**
* mic_x100_get_apic_id - Get bootstrap APIC ID.
* @mdev: pointer to mic_device instance
*/
static u32 mic_x100_get_apic_id(struct mic_device *mdev)
{
u32 scratch2 = 0;
scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
return MIC_X100_SPAD2_APIC_ID(scratch2);
}
/**
* mic_x100_send_firmware_intr - Send an interrupt to the firmware on MIC.
* @mdev: pointer to mic_device instance
*/
static void mic_x100_send_firmware_intr(struct mic_device *mdev)
{
u32 apicicr_low;
u64 apic_icr_offset = MIC_X100_SBOX_APICICR7;
int vector = MIC_X100_BSP_INTERRUPT_VECTOR;
struct mic_mw *mw = &mdev->mmio;
/*
* For MIC we need to make sure we "hit"
* the send_icr bit (13).
*/
apicicr_low = (vector | (1 << 13));
mic_mmio_write(mw, mic_x100_get_apic_id(mdev),
MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset + 4);
/* Ensure that the interrupt is ordered w.r.t. previous stores. */
wmb();
mic_mmio_write(mw, apicicr_low,
MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset);
}
/**
* mic_x100_hw_reset - Reset the MIC device.
* @mdev: pointer to mic_device instance
*/
static void mic_x100_hw_reset(struct mic_device *mdev)
{
u32 reset_reg;
u32 rgcr = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_RGCR;
struct mic_mw *mw = &mdev->mmio;
/* Ensure that the reset is ordered w.r.t. previous loads and stores */
mb();
/* Trigger reset */
reset_reg = mic_mmio_read(mw, rgcr);
reset_reg |= 0x1;
mic_mmio_write(mw, reset_reg, rgcr);
/*
* It seems we really want to delay at least 1 second
* after touching reset to prevent a lot of problems.
*/
msleep(1000);
}
/**
* mic_x100_load_command_line - Load command line to MIC.
* @mdev: pointer to mic_device instance
* @fw: the firmware image
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
static int
mic_x100_load_command_line(struct mic_device *mdev, const struct firmware *fw)
{
u32 len = 0;
u32 boot_mem;
char *buf;
void __iomem *cmd_line_va = mdev->aper.va + mdev->bootaddr + fw->size;
#define CMDLINE_SIZE 2048
boot_mem = mdev->aper.len >> 20;
buf = kzalloc(CMDLINE_SIZE, GFP_KERNEL);
if (!buf) {
dev_err(mdev->sdev->parent,
"%s %d allocation failed\n", __func__, __LINE__);
return -ENOMEM;
}
len += snprintf(buf, CMDLINE_SIZE - len,
" mem=%dM", boot_mem);
if (mdev->cmdline)
snprintf(buf + len, CMDLINE_SIZE - len, " %s", mdev->cmdline);
memcpy_toio(cmd_line_va, buf, strlen(buf) + 1);
kfree(buf);
return 0;
}
/**
* mic_x100_load_ramdisk - Load ramdisk to MIC.
* @mdev: pointer to mic_device instance
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
static int
mic_x100_load_ramdisk(struct mic_device *mdev)
{
const struct firmware *fw;
int rc;
struct boot_params __iomem *bp = mdev->aper.va + mdev->bootaddr;
rc = request_firmware(&fw,
mdev->ramdisk, mdev->sdev->parent);
if (rc < 0) {
dev_err(mdev->sdev->parent,
"ramdisk request_firmware failed: %d %s\n",
rc, mdev->ramdisk);
goto error;
}
/*
* Typically the bootaddr for card OS is 64M
* so copy over the ramdisk @ 128M.
*/
memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size);
iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image);
iowrite32(fw->size, &bp->hdr.ramdisk_size);
release_firmware(fw);
error:
return rc;
}
/**
* mic_x100_get_boot_addr - Get MIC boot address.
* @mdev: pointer to mic_device instance
*
* This function is called during firmware load to determine
* the address at which the OS should be downloaded in card
* memory i.e. GDDR.
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
static int
mic_x100_get_boot_addr(struct mic_device *mdev)
{
u32 scratch2, boot_addr;
int rc = 0;
scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO);
boot_addr = MIC_X100_SPAD2_DOWNLOAD_ADDR(scratch2);
dev_dbg(mdev->sdev->parent, "%s %d boot_addr 0x%x\n",
__func__, __LINE__, boot_addr);
if (boot_addr > (1 << 31)) {
dev_err(mdev->sdev->parent,
"incorrect bootaddr 0x%x\n",
boot_addr);
rc = -EINVAL;
goto error;
}
mdev->bootaddr = boot_addr;
error:
return rc;
}
/**
* mic_x100_load_firmware - Load firmware to MIC.
* @mdev: pointer to mic_device instance
* @buf: buffer containing boot string including firmware/ramdisk path.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
static int
mic_x100_load_firmware(struct mic_device *mdev, const char *buf)
{
int rc;
const struct firmware *fw;
rc = mic_x100_get_boot_addr(mdev);
if (rc)
goto error;
/* load OS */
rc = request_firmware(&fw, mdev->firmware, mdev->sdev->parent);
if (rc < 0) {
dev_err(mdev->sdev->parent,
"ramdisk request_firmware failed: %d %s\n",
rc, mdev->firmware);
goto error;
}
if (mdev->bootaddr > mdev->aper.len - fw->size) {
rc = -EINVAL;
dev_err(mdev->sdev->parent, "%s %d rc %d bootaddr 0x%x\n",
__func__, __LINE__, rc, mdev->bootaddr);
release_firmware(fw);
goto error;
}
memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size);
mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size);
if (!strcmp(mdev->bootmode, "elf"))
goto done;
/* load command line */
rc = mic_x100_load_command_line(mdev, fw);
if (rc) {
dev_err(mdev->sdev->parent, "%s %d rc %d\n",
__func__, __LINE__, rc);
goto error;
}
release_firmware(fw);
/* load ramdisk */
if (mdev->ramdisk)
rc = mic_x100_load_ramdisk(mdev);
error:
dev_dbg(mdev->sdev->parent, "%s %d rc %d\n", __func__, __LINE__, rc);
done:
return rc;
}
/**
* mic_x100_get_postcode - Get postcode status from firmware.
* @mdev: pointer to mic_device instance
*
* RETURNS: postcode.
*/
static u32 mic_x100_get_postcode(struct mic_device *mdev)
{
return mic_mmio_read(&mdev->mmio, MIC_X100_POSTCODE);
}
/**
* mic_x100_smpt_set - Update an SMPT entry with a DMA address.
* @mdev: pointer to mic_device instance
*
* RETURNS: none.
*/
static void
mic_x100_smpt_set(struct mic_device *mdev, dma_addr_t dma_addr, u8 index)
{
#define SNOOP_ON (0 << 0)
#define SNOOP_OFF (1 << 0)
/*
* Sbox Smpt Reg Bits:
* Bits 31:2 Host address
* Bits 1 RSVD
* Bits 0 No snoop
*/
#define BUILD_SMPT(NO_SNOOP, HOST_ADDR) \
(u32)(((HOST_ADDR) << 2) | ((NO_SNOOP) & 0x01))
uint32_t smpt_reg_val = BUILD_SMPT(SNOOP_ON,
dma_addr >> mdev->smpt->info.page_shift);
mic_mmio_write(&mdev->mmio, smpt_reg_val,
MIC_X100_SBOX_BASE_ADDRESS +
MIC_X100_SBOX_SMPT00 + (4 * index));
}
/**
* mic_x100_smpt_hw_init - Initialize SMPT X100 specific fields.
* @mdev: pointer to mic_device instance
*
* RETURNS: none.
*/
static void mic_x100_smpt_hw_init(struct mic_device *mdev)
{
struct mic_smpt_hw_info *info = &mdev->smpt->info;
info->num_reg = 32;
info->page_shift = 34;
info->page_size = (1ULL << info->page_shift);
info->base = 0x8000000000ULL;
}
struct mic_smpt_ops mic_x100_smpt_ops = {
.init = mic_x100_smpt_hw_init,
.set = mic_x100_smpt_set,
};
struct mic_hw_ops mic_x100_ops = {
.aper_bar = MIC_X100_APER_BAR,
.mmio_bar = MIC_X100_MMIO_BAR,
.read_spad = mic_x100_read_spad,
.write_spad = mic_x100_write_spad,
.send_intr = mic_x100_send_intr,
.ack_interrupt = mic_x100_ack_interrupt,
.reset = mic_x100_hw_reset,
.reset_fw_ready = mic_x100_reset_fw_ready,
.is_fw_ready = mic_x100_is_fw_ready,
.send_firmware_intr = mic_x100_send_firmware_intr,
.load_mic_fw = mic_x100_load_firmware,
.get_postcode = mic_x100_get_postcode,
};
struct mic_hw_intr_ops mic_x100_intr_ops = {
.intr_init = mic_x100_hw_intr_init,
.enable_interrupts = mic_x100_enable_interrupts,
.disable_interrupts = mic_x100_disable_interrupts,
.program_msi_to_src_map = mic_x100_program_msi_to_src_map,
.read_msi_to_src_map = mic_x100_read_msi_to_src_map,
};