diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index cd02433..d7b1f01 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -63,10 +63,18 @@
         + User Manual
           http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
 
+      - Allwinner H2+ (sun8i)
+        + No document available now, but is known to be working properly with
+          H3 drivers and memory map.
+
       - Allwinner H3 (sun8i)
         + Datasheet
           http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
 
+      - Allwinner V3s (sun8i)
+        + Datasheet
+          http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80
         + Datasheet
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index a1bcfee..3c2fd72 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -202,6 +202,7 @@
 			    "marvell,armada-380-smp"
 			    "marvell,armada-390-smp"
 			    "marvell,armada-xp-smp"
+			    "marvell,98dx3236-smp"
 			    "mediatek,mt6589-smp"
 			    "mediatek,mt81xx-tz-smp"
 			    "qcom,gcc-msm8660"
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
new file mode 100644
index 0000000..26eb9d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
@@ -0,0 +1,16 @@
+Resume Control
+--------------
+Available on Marvell SOCs: 98DX3336 and 98DX4251
+
+Required properties:
+
+- compatible: must be "marvell,98dx3336-resume-ctrl"
+
+- reg: Should contain resume control registers location and length
+
+Example:
+
+resume@20980 {
+	compatible = "marvell,98dx3336-resume-ctrl";
+	reg = <0x20980 0x10>;
+};
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index 4d6467c..d2c4644 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -12,6 +12,7 @@
   allwinner,sun8i-a23
   allwinner,sun8i-a33
   allwinner,sun8i-a83t
+  allwinner,sun8i-h2-plus
   allwinner,sun8i-h3
   allwinner,sun9i-a80
   allwinner,sun50i-a64
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
index 027d6c2..9e2e7f6 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
@@ -33,7 +33,7 @@
 - i80-if-timings: timing configuration for lcd i80 interface support.
 
 Optional Properties:
-- samsung,power-domain: a phandle to DECON power domain node.
+- power-domains: a phandle to DECON power domain node.
 - display-timings: timing settings for DECON, as described in document [1].
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.
diff --git a/MAINTAINERS b/MAINTAINERS
index 76dfb51..c4caa9b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1234,13 +1234,9 @@
 N:	efm32
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
-M:	Daniel Ribeiro <drwyrm@gmail.com>
-M:	Stefan Schmidt <stefan@openezx.org>
-M:	Harald Welte <laforge@openezx.org>
-L:	openezx-devel@lists.openezx.org (moderated for non-subscribers)
-W:	http://www.openezx.org/
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
@@ -2641,7 +2637,7 @@
 M:	Eric Anholt <eric@anholt.net>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
+T:	git git://github.com/anholt/linux
 S:	Maintained
 N:	bcm2835
 F:	drivers/staging/vc04_services
@@ -9023,7 +9019,20 @@
 S:	Supported
 F:	tools/objtool/
 
-OMAP SUPPORT
+OMAP1 SUPPORT
+M:	Aaro Koskinen <aaro.koskinen@iki.fi>
+M:	Tony Lindgren <tony@atomide.com>
+L:	linux-omap@vger.kernel.org
+Q:	http://patchwork.kernel.org/project/linux-omap/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
+S:	Maintained
+F:	arch/arm/mach-omap1/
+F:	arch/arm/plat-omap/
+F:	arch/arm/configs/omap1_defconfig
+F:	drivers/i2c/busses/i2c-omap.c
+F:	include/linux/i2c-omap.h
+
+OMAP2+ SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 W:	http://www.muru.com/linux/omap/
@@ -9031,8 +9040,8 @@
 Q:	http://patchwork.kernel.org/project/linux-omap/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 S:	Maintained
-F:	arch/arm/*omap*/
-F:	arch/arm/configs/omap1_defconfig
+F:	arch/arm/mach-omap2/
+F:	arch/arm/plat-omap/
 F:	arch/arm/configs/omap2plus_defconfig
 F:	drivers/i2c/busses/i2c-omap.c
 F:	drivers/irqchip/irq-omap-intc.c
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 5225fbc..f3f8c5c 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -5,6 +5,8 @@
 	select WATCHDOG
 	select ASPEED_WATCHDOG
 	select MOXART_TIMER
+	select MFD_SYSCON
+	select PINCTRL
 	help
 	  Say Y here if you want to run your kernel on an ASpeed BMC SoC.
 
@@ -14,6 +16,7 @@
 	bool "Aspeed SoC 4th Generation"
 	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
+	select PINCTRL_ASPEED_G4
 	help
 	 Say yes if you intend to run on an Aspeed ast2400 or similar
 	 fourth generation BMCs, such as those used by OpenPower Power8
@@ -23,6 +26,7 @@
 	bool "Aspeed SoC 5th Generation"
 	depends on ARCH_MULTI_V6
 	select CPU_V6
+	select PINCTRL_ASPEED_G5
 	help
 	 Say yes if you intend to run on an Aspeed ast2500 or similar
 	 fifth generation Aspeed BMCs.
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index b4332b7..3d89b79 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -55,7 +55,7 @@
 	int memctrl;
 } at91_pm_data;
 
-void __iomem *at91_ramc_base[2];
+static void __iomem *at91_ramc_base[2];
 
 static int at91_pm_valid_state(suspend_state_t state)
 {
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 3fcf881..bf980c6 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -18,8 +18,6 @@
 #include <soc/at91/at91sam9_sdramc.h>
 
 #ifndef __ASSEMBLY__
-extern void __iomem *at91_ramc_base[];
-
 #define at91_ramc_read(id, field) \
 	__raw_readl(at91_ramc_base[id] + field)
 
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0a2e6da..df96ca9 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -21,7 +21,7 @@
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 
 # Board specific
-obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o
+obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o pdata-quirks.o
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
 obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 7475f02..ccad2f9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -563,7 +563,7 @@
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK("vpif",		NULL,		&vpif_clk),
-	CLK("ahci_da850",	NULL,		&sata_clk),
+	CLK("ahci_da850",	"fck",		&sata_clk),
 	CLK("davinci-rproc.0",	NULL,		&dsp_clk),
 	CLK(NULL,		NULL,		&ehrpwm_clk),
 	CLK("ehrpwm.0",		"fck",		&ehrpwm0_clk),
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 06205fe..e3cef50 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -52,6 +52,7 @@
 	OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci-da8xx", NULL),
 	OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
 	OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL),
+	OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL),
 	{}
 };
 
@@ -59,6 +60,9 @@
 
 static void __init da850_init_machine(void)
 {
+	/* All existing boards use 100MHz SATA refclkpn */
+	static const unsigned long sata_refclkpn = 100 * 1000 * 1000;
+
 	int ret;
 
 	ret = da8xx_register_usb20_phy_clk(false);
@@ -70,8 +74,14 @@
 		pr_warn("%s: registering USB 1.1 PHY clock failed: %d",
 			__func__, ret);
 
+	ret = da850_register_sata_refclk(sata_refclkpn);
+	if (ret)
+		pr_warn("%s: registering SATA REFCLK failed: %d",
+			__func__, ret);
+
 	of_platform_default_populate(NULL, da850_auxdata_lookup, NULL);
 	davinci_pm_init();
+	pdata_quirks_init();
 }
 
 static const char *const da850_boards_compat[] __initconst = {
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index c2457b3..7cf529f 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -24,6 +24,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <mach/clock.h>
 #include "cpuidle.h"
 #include "sram.h"
 
@@ -1023,6 +1024,28 @@
 }
 
 #ifdef CONFIG_ARCH_DAVINCI_DA850
+static struct clk sata_refclk = {
+	.name		= "sata_refclk",
+	.set_rate	= davinci_simple_set_rate,
+};
+
+static struct clk_lookup sata_refclk_lookup =
+		CLK("ahci_da850", "refclk", &sata_refclk);
+
+int __init da850_register_sata_refclk(int rate)
+{
+	int ret;
+
+	sata_refclk.rate = rate;
+	ret = clk_register(&sata_refclk);
+	if (ret)
+		return ret;
+
+	clkdev_add(&sata_refclk_lookup);
+
+	return 0;
+}
+
 static struct resource da850_sata_resources[] = {
 	{
 		.start	= DA850_SATA_BASE,
@@ -1055,8 +1078,11 @@
 
 int __init da850_register_sata(unsigned long refclkpn)
 {
-	/* please see comment in drivers/ata/ahci_da850.c */
-	BUG_ON(refclkpn != 100 * 1000 * 1000);
+	int ret;
+
+	ret = da850_register_sata_refclk(refclkpn);
+	if (ret)
+		return ret;
 
 	return platform_device_register(&da850_sata_device);
 }
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 0b3c169..037aa66 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -102,6 +102,8 @@
 static inline int davinci_pm_init(void) { return 0; }
 #endif
 
+void __init pdata_quirks_init(void);
+
 #define SRAM_SIZE	SZ_128K
 
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 85ff218..7e46422 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -95,6 +95,7 @@
 int da8xx_register_usb_refclkin(int rate);
 int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
 int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
+int da850_register_sata_refclk(int rate);
 int da8xx_register_emac(void);
 int da8xx_register_uio_pruss(void);
 int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
new file mode 100644
index 0000000..5b57da4
--- /dev/null
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -0,0 +1,39 @@
+/*
+ * Legacy platform_data quirks
+ *
+ * Copyright (C) 2016 BayLibre, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <mach/common.h>
+
+struct pdata_init {
+	const char *compatible;
+	void (*fn)(void);
+};
+
+static void pdata_quirks_check(struct pdata_init *quirks)
+{
+	while (quirks->compatible) {
+		if (of_machine_is_compatible(quirks->compatible)) {
+			if (quirks->fn)
+				quirks->fn();
+			break;
+		}
+		quirks++;
+	}
+}
+
+static struct pdata_init pdata_quirks[] __initdata = {
+	{ /* sentinel */ },
+};
+
+void __init pdata_quirks_init(void)
+{
+	pdata_quirks_check(pdata_quirks);
+}
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index 03c42e5..b0cf2de 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -10,6 +10,7 @@
  */
 
 #include <mach/ep93xx-regs.h>
+#include <asm/mach-types.h>
 
 static unsigned char __raw_readb(unsigned int ptr)
 {
@@ -75,8 +76,19 @@
 		;
 }
 
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+#define TS72XX_WDT_FEED_VAL		0x05
+
+static void __maybe_unused ts72xx_watchdog_disable(void)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
+	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
+}
 
 static void arch_decomp_setup(void)
 {
+	if (machine_is_ts72xx())
+		ts72xx_watchdog_disable();
 	ethernet_reset();
 }
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 0bb63b8..0a99140 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -95,11 +95,6 @@
 	default y
 	depends on ARCH_EXYNOS4
 
-config SOC_EXYNOS4415
-	bool "SAMSUNG EXYNOS4415"
-	default y
-	depends on ARCH_EXYNOS4
-
 config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 757fc11..c404c15 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -45,8 +45,8 @@
 	.id                = -1,
 };
 
-void __iomem *sysram_base_addr;
-void __iomem *sysram_ns_base_addr;
+void __iomem *sysram_base_addr __ro_after_init;
+void __iomem *sysram_ns_base_addr __ro_after_init;
 
 void __init exynos_sysram_init(void)
 {
@@ -210,7 +210,6 @@
 	"samsung,exynos4210",
 	"samsung,exynos4212",
 	"samsung,exynos4412",
-	"samsung,exynos4415",
 	"samsung,exynos5",
 	"samsung,exynos5250",
 	"samsung,exynos5260",
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index f086bf6..038fd8c 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -32,7 +32,7 @@
 #define EXYNOS5420_USE_ARM_CORE_DOWN_STATE	BIT(29)
 #define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
 
-static void __iomem *ns_sram_base_addr;
+static void __iomem *ns_sram_base_addr __ro_after_init;
 
 /*
  * The common v7_exit_coherency_flush API could not be used because of the
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 10bc753..312d3a8 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -65,7 +65,7 @@
 	int (*cpu_suspend)(unsigned long);
 };
 
-static const struct exynos_pm_data *pm_data;
+static const struct exynos_pm_data *pm_data __ro_after_init;
 
 static int exynos5420_cpu_state;
 static unsigned int exynos_pmu_spare3;
@@ -228,7 +228,6 @@
 EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
 EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
 EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
-EXYNOS_PMU_IRQ(exynos4415_pmu_irq, "samsung,exynos4415-pmu");
 EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
 EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
 
diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h
index e883583..c58b68a 100644
--- a/arch/arm/mach-hisi/core.h
+++ b/arch/arm/mach-hisi/core.h
@@ -15,5 +15,4 @@
 extern void hix5hd2_cpu_die(unsigned int cpu);
 
 extern void hip01_set_cpu(int cpu, bool enable);
-extern void hip01_cpu_die(unsigned int cpu);
 #endif
diff --git a/arch/arm/mach-imx/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c
index 55d61ea..8a1a2fc 100644
--- a/arch/arm/mach-imx/devices/platform-flexcan.c
+++ b/arch/arm/mach-imx/devices/platform-flexcan.c
@@ -19,15 +19,6 @@
 #define imx_flexcan_data_entry(soc, _id, _hwid, _size)			\
 	[_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_flexcan_data imx25_flexcan_data[] __initconst = {
-#define imx25_flexcan_data_entry(_id, _hwid)				\
-	imx_flexcan_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_flexcan_data_entry(0, 1),
-	imx25_flexcan_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX35
 const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
 #define imx35_flexcan_data_entry(_id, _hwid)				\
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index 3d039ef..466c9cc 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -22,16 +22,6 @@
 #define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid)	\
 	[id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
 
-#ifdef CONFIG_SOC_IMX25
-const struct imx_sdhci_esdhc_imx_data
-imx25_sdhci_esdhc_imx_data[] __initconst = {
-#define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
-	imx_sdhci_esdhc_imx_data_entry(MX25, "sdhci-esdhc-imx25", _id, _hwid)
-	imx25_sdhci_esdhc_imx_data_entry(0, 1),
-	imx25_sdhci_esdhc_imx_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
 #ifdef CONFIG_SOC_IMX35
 const struct imx_sdhci_esdhc_imx_data
 imx35_sdhci_esdhc_imx_data[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 7ba651a..45e16bd 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -31,7 +31,6 @@
 #include <linux/regulator/machine.h>
 #include <linux/spi/l4f00242t03.h>
 
-#include <media/soc_camera.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -53,8 +52,6 @@
 #define SD1_CD			IMX_GPIO_NR(2, 26)
 #define LCD_RESET		IMX_GPIO_NR(1, 3)
 #define LCD_ENABLE		IMX_GPIO_NR(1, 31)
-#define CSI_PWRDWN		IMX_GPIO_NR(4, 19)
-#define CSI_RESET		IMX_GPIO_NR(3, 6)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -144,21 +141,6 @@
 	PA30_PF_CONTRAST,
 	LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
 	LCD_RESET | GPIO_GPIO | GPIO_OUT,
-	/* CSI */
-	PB10_PF_CSI_D0,
-	PB11_PF_CSI_D1,
-	PB12_PF_CSI_D2,
-	PB13_PF_CSI_D3,
-	PB14_PF_CSI_D4,
-	PB15_PF_CSI_MCLK,
-	PB16_PF_CSI_PIXCLK,
-	PB17_PF_CSI_D5,
-	PB18_PF_CSI_D6,
-	PB19_PF_CSI_D7,
-	PB20_PF_CSI_VSYNC,
-	PB21_PF_CSI_HSYNC,
-	CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
-	CSI_RESET | GPIO_GPIO | GPIO_OUT,
 	/* SSI4 */
 	PC16_PF_SSI4_FS,
 	PC17_PF_SSI4_RXD,
@@ -166,11 +148,6 @@
 	PC19_PF_SSI4_CLK,
 };
 
-static struct gpio mx27_3ds_camera_gpios[] = {
-	{ CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" },
-	{ CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" },
-};
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -270,7 +247,6 @@
 
 static struct regulator_consumer_supply vmmc1_consumers[] = {
 	REGULATOR_SUPPLY("vcore", "spi0.0"),
-	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
 };
 
 static struct regulator_init_data vmmc1_init = {
@@ -299,22 +275,6 @@
 	.consumer_supplies = vgen_consumers,
 };
 
-static struct regulator_consumer_supply vvib_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vvib_init = {
-	.constraints = {
-		.min_uV = 1300000,
-		.max_uV = 1300000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
-	.consumer_supplies = vvib_consumers,
-};
-
 static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
 	{
 		.id = MC13783_REG_VMMC1,
@@ -328,9 +288,6 @@
 	}, {
 		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
 		.init_data = &gpo_init,
-	}, {
-		.id = MC13783_REG_VVIB,  /* Power OV2640 */
-		.init_data = &vvib_init,
 	},
 };
 
@@ -370,51 +327,6 @@
 	.num_chipselect	= ARRAY_SIZE(spi2_chipselect),
 };
 
-static int mx27_3ds_camera_power(struct device *dev, int on)
-{
-	/* enable or disable the camera */
-	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
-	gpio_set_value(CSI_PWRDWN, on ? 0 : 1);
-
-	if (!on)
-		goto out;
-
-	/* If enabled, give a reset impulse */
-	gpio_set_value(CSI_RESET, 0);
-	msleep(20);
-	gpio_set_value(CSI_RESET, 1);
-	msleep(100);
-
-out:
-	return 0;
-}
-
-static struct i2c_board_info mx27_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct regulator_bulk_data mx27_3ds_camera_regs[] = {
-	{ .supply = "cmos_vcore" },
-	{ .supply = "cmos_2v8" },
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx27_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= mx27_3ds_camera_power,
-	.regulators	= mx27_3ds_camera_regs,
-	.num_regulators	= ARRAY_SIZE(mx27_3ds_camera_regs),
-};
-
-static struct platform_device mx27_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
 static struct imx_fb_videomode mx27_3ds_modes[] = {
 	{	/* 480x640 @ 60 Hz */
 		.mode = {
@@ -471,14 +383,6 @@
 	},
 };
 
-static struct platform_device *devices[] __initdata = {
-	&mx27_3ds_ov2640,
-};
-
-static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = {
-	.clk = 26000000,
-};
-
 static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
@@ -498,7 +402,6 @@
 	imx27_add_spi_imx0(&spi1_pdata);
 
 	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
 	imx27_add_imx_fb(&mx27_3ds_fb_data);
 
 	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
@@ -506,8 +409,6 @@
 
 static void __init mx27pdk_late_init(void)
 {
-	int ret;
-
 	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 
@@ -531,14 +432,6 @@
 	if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
 		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
 
-	ret = gpio_request_array(mx27_3ds_camera_gpios,
-				 ARRAY_SIZE(mx27_3ds_camera_gpios));
-	if (ret) {
-		pr_err("Failed to request camera gpios");
-		iclink_ov2640.power = NULL;
-	}
-
-	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
 
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 12b8a52..558e5f8 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -26,16 +26,12 @@
 #include <linux/regulator/machine.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/memblock.h>
-
-#include <media/soc_camera.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
-#include <asm/memblock.h>
 
 #include "3ds_debugboard.h"
 #include "common.h"
@@ -137,23 +133,6 @@
 	MX31_PIN_HSYNC__HSYNC,
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_CONTRAST__CONTRAST,
-	/* CSI */
-	MX31_PIN_CSI_D6__CSI_D6,
-	MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8,
-	MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10,
-	MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12,
-	MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14,
-	MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
-	MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
-	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
-	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
 	/* SSI */
 	MX31_PIN_STXD4__STXD4,
 	MX31_PIN_SRXD4__SRXD4,
@@ -162,98 +141,6 @@
 };
 
 /*
- * Camera support
- */
-static phys_addr_t mx3_camera_base __initdata;
-#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M
-
-#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
-#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1)
-
-static struct gpio mx31_3ds_camera_gpios[] = {
-	{ MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" },
-	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
-};
-
-static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
-	.flags = MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz = 2600,
-};
-
-static int __init mx31_3ds_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev =
-		imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	if (!mx3_camera_base)
-		goto err;
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX31_3DS_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
-static int mx31_3ds_camera_power(struct device *dev, int on)
-{
-	/* enable or disable the camera */
-	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1);
-
-	if (!on)
-		goto out;
-
-	/* If enabled, give a reset impulse */
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0);
-	msleep(20);
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1);
-	msleep(100);
-
-out:
-	return 0;
-}
-
-static struct i2c_board_info mx31_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct regulator_bulk_data mx31_3ds_camera_regs[] = {
-	{ .supply = "cmos_vcore" },
-	{ .supply = "cmos_2v8" },
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx31_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= mx31_3ds_camera_power,
-	.regulators	= mx31_3ds_camera_regs,
-	.num_regulators	= ARRAY_SIZE(mx31_3ds_camera_regs),
-};
-
-static struct platform_device mx31_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
-/*
  * FB support
  */
 static const struct fb_videomode fb_modedb[] = {
@@ -410,7 +297,6 @@
 
 static struct regulator_consumer_supply vmmc1_consumers[] = {
 	REGULATOR_SUPPLY("vcore", "spi0.0"),
-	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
 };
 
 static struct regulator_init_data vmmc1_init = {
@@ -441,22 +327,6 @@
 	.consumer_supplies = vgen_consumers,
 };
 
-static struct regulator_consumer_supply vvib_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vvib_init = {
-	.constraints = {
-		.min_uV = 1300000,
-		.max_uV = 1300000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
-	.consumer_supplies = vvib_consumers,
-};
-
 static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
 	{
 		.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
@@ -480,9 +350,6 @@
 	}, {
 		.id = MC13783_REG_VGEN,  /* Power LCD */
 		.init_data = &vgen_init,
-	}, {
-		.id = MC13783_REG_VVIB,  /* Power CMOS */
-		.init_data = &vvib_init,
 	},
 };
 
@@ -688,10 +555,6 @@
 	.bitrate = 100000,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&mx31_3ds_ov2640,
-};
-
 static void __init mx31_3ds_init(void)
 {
 	imx31_soc_init();
@@ -723,14 +586,10 @@
 
 static void __init mx31_3ds_late(void)
 {
-	int ret;
-
 	mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	spi_register_board_info(mx31_3ds_spi_devs,
 				ARRAY_SIZE(mx31_3ds_spi_devs));
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
 	mx31_3ds_usbotg_init();
 	if (otg_mode_host) {
 		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
@@ -751,17 +610,6 @@
 		       "devices on the debug board are unusable.\n");
 
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
-
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request_array(mx31_3ds_camera_gpios,
-				 ARRAY_SIZE(mx31_3ds_camera_gpios));
-	if (ret) {
-		pr_err("Failed to request camera gpios");
-		iclink_ov2640.power = NULL;
-	}
-
-	mx31_3ds_init_camera();
 }
 
 static void __init mx31_3ds_timer_init(void)
@@ -769,13 +617,6 @@
 	mx31_clocks_init(26000000);
 }
 
-static void __init mx31_3ds_reserve(void)
-{
-	/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX31_3DS_CAMERA_BUF_SIZE,
-					 MX31_3DS_CAMERA_BUF_SIZE);
-}
-
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
@@ -785,6 +626,5 @@
 	.init_time	= mx31_3ds_timer_init,
 	.init_machine = mx31_3ds_init,
 	.init_late	= mx31_3ds_late,
-	.reserve = mx31_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index c8c2e09..1c33a6c 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -41,12 +41,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/memblock.h>
 
 #include <video/platform_lcd.h>
 
-#include <media/soc_camera.h>
-
 #include "3ds_debugboard.h"
 #include "common.h"
 #include "devices-imx35.h"
@@ -233,83 +230,10 @@
 	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
 	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
 	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	/* CSI */
-	MX35_PAD_TX1__IPU_CSI_D_6,
-	MX35_PAD_TX0__IPU_CSI_D_7,
-	MX35_PAD_CSI_D8__IPU_CSI_D_8,
-	MX35_PAD_CSI_D9__IPU_CSI_D_9,
-	MX35_PAD_CSI_D10__IPU_CSI_D_10,
-	MX35_PAD_CSI_D11__IPU_CSI_D_11,
-	MX35_PAD_CSI_D12__IPU_CSI_D_12,
-	MX35_PAD_CSI_D13__IPU_CSI_D_13,
-	MX35_PAD_CSI_D14__IPU_CSI_D_14,
-	MX35_PAD_CSI_D15__IPU_CSI_D_15,
-	MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC,
-	MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
-	MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
-	MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
 	/*PMIC IRQ*/
 	MX35_PAD_GPIO2_0__GPIO2_0,
 };
 
-/*
- * Camera support
-*/
-static phys_addr_t mx3_camera_base __initdata;
-#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M
-
-static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = {
-	.flags = MX3_CAMERA_DATAWIDTH_8,
-	.mclk_10khz = 2000,
-};
-
-static int __init imx35_3ds_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev =
-		imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	if (!mx3_camera_base)
-		goto err;
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX35_3DS_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
-static struct i2c_board_info mx35_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx35_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= NULL,
-};
-
-static struct platform_device mx35_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
 static struct regulator_consumer_supply sw1_consumers[] = {
 	{
 		.supply = "cpu_vcc",
@@ -321,10 +245,6 @@
 	REGULATOR_SUPPLY("VDDA", "0-000a"),
 };
 
-static struct regulator_consumer_supply vaudio_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"),
-};
-
 static struct regulator_init_data sw1_init = {
 	.constraints = {
 		.name = "SW1",
@@ -405,18 +325,6 @@
 	}
 };
 
-static struct regulator_init_data vaudio_init = {
-	.constraints = {
-		.name = "VAUDIO",
-		.min_uV = 2300000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vaudio_consumers),
-	.consumer_supplies = vaudio_consumers,
-};
-
 static struct regulator_init_data vcam_init = {
 	.constraints = {
 		.name = "VCAM",
@@ -460,7 +368,6 @@
 	{ .id = MC13892_VDIG, .init_data = &vdig_init },
 	{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
 	{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
-	{ .id = MC13892_VAUDIO, .init_data = &vaudio_init },
 	{ .id = MC13892_VCAM, .init_data = &vcam_init },
 	{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
 	{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
@@ -583,8 +490,6 @@
 		0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
 
 	imx35_add_ipu_core();
-	platform_device_register(&mx35_3ds_ov2640);
-	imx35_3ds_init_camera();
 }
 
 static void __init mx35_3ds_late_init(void)
@@ -607,13 +512,6 @@
 	mx35_clocks_init();
 }
 
-static void __init mx35_3ds_reserve(void)
-{
-	/* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE,
-					 MX35_3DS_CAMERA_BUF_SIZE);
-}
-
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
 	.atag_offset = 0x100,
@@ -623,6 +521,5 @@
 	.init_time	= mx35pdk_timer_init,
 	.init_machine = mx35_3ds_init,
 	.init_late	= mx35_3ds_late_init,
-	.reserve = mx35_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 9f0f55b..b787ba6 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -31,17 +31,13 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/gfp.h>
-#include <linux/memblock.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
-#include <media/soc_camera.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/memblock.h>
 
 #include "common.h"
 #include "devices-imx31.h"
@@ -150,22 +146,6 @@
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
 	MX31_PIN_LCS0__GPIO3_23,
-	/* CSI */
-	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
-	MX31_PIN_CSI_D6__CSI_D6,
-	MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8,
-	MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10,
-	MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12,
-	MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14,
-	MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
-	MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
-	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	/* GPIO */
 	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
 	/* OTG */
@@ -289,34 +269,6 @@
 	.flags = AT24_FLAG_ADDR16,
 };
 
-static int pcm037_camera_power(struct device *dev, int on)
-{
-	/* disable or enable the camera in X7 or X8 PCM970 connector */
-	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
-	return 0;
-}
-
-static struct i2c_board_info pcm037_i2c_camera[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	}, {
-		I2C_BOARD_INFO("mt9v022", 0x48),
-	},
-};
-
-static struct soc_camera_link iclink_mt9v022 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.board_info	= &pcm037_i2c_camera[1],
-	.i2c_adapter_id	= 2,
-};
-
-static struct soc_camera_link iclink_mt9t031 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_camera[0],
-	.i2c_adapter_id	= 2,
-};
-
 static struct i2c_board_info pcm037_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
@@ -326,22 +278,6 @@
 	}
 };
 
-static struct platform_device pcm037_mt9t031 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_mt9t031,
-	},
-};
-
-static struct platform_device pcm037_mt9v022 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &iclink_mt9v022,
-	},
-};
-
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
 static int pcm970_sdhc1_get_ro(struct device *dev)
@@ -403,42 +339,9 @@
 	.exit = pcm970_sdhc1_exit,
 };
 
-struct mx3_camera_pdata camera_pdata __initdata = {
-	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 2000,
-};
-
-static phys_addr_t mx3_camera_base __initdata;
-#define MX3_CAMERA_BUF_SIZE SZ_4M
-
-static int __init pcm037_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX3_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&pcm037_mt9t031,
-	&pcm037_mt9v022,
 };
 
 static const struct fb_videomode fb_modedb[] = {
@@ -651,13 +554,6 @@
 	mx31_clocks_init(26000000);
 }
 
-static void __init pcm037_reserve(void)
-{
-	/* reserve 4 MiB for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
-			MX3_CAMERA_BUF_SIZE);
-}
-
 static void __init pcm037_init_late(void)
 {
 	int ret;
@@ -677,16 +573,6 @@
 
 	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
-	if (!ret)
-		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
-	else
-		iclink_mt9t031.power = NULL;
-
-	pcm037_init_camera();
-
 	pcm970_sja1000_resources[1].start =
 			gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
 	pcm970_sja1000_resources[1].end =
@@ -699,7 +585,6 @@
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
 	.atag_offset = 0x100,
-	.reserve = pcm037_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
index 2e895a8..922d491 100644
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -24,8 +24,6 @@
 
 #include <linux/usb/otg.h>
 
-#include <media/soc_camera.h>
-
 #include "common.h"
 #include "devices-imx31.h"
 #include "ehci.h"
@@ -39,17 +37,6 @@
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* CSI */
-	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
-	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
-	MX31_PIN_TXD2__GPIO1_28,
 	/* dsPIC resets */
 	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
 	/*battery detection */
@@ -143,82 +130,6 @@
 	},
 };
 
-#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
-#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
-#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
-
-static int marxbot_basecam_power(struct device *dev, int on)
-{
-	gpio_set_value(BASECAM_POWER, !on);
-	return 0;
-}
-
-static int marxbot_basecam_reset(struct device *dev)
-{
-	gpio_set_value(BASECAM_RST_B, 0);
-	udelay(100);
-	gpio_set_value(BASECAM_RST_B, 1);
-	return 0;
-}
-
-static struct i2c_board_info marxbot_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	},
-};
-
-static struct soc_camera_link base_iclink = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= marxbot_basecam_power,
-	.reset		= marxbot_basecam_reset,
-	.board_info	= &marxbot_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device marxbot_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &base_iclink,
-		},
-	},
-};
-
-static struct platform_device *marxbot_cameras[] __initdata = {
-	&marxbot_camera[0],
-};
-
-static int __init marxbot_cam_init(void)
-{
-	int ret = gpio_request(CAM_CHOICE, "cam-choice");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_CHOICE, 0);
-
-	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(BASECAM_RST_B, 1);
-	ret = gpio_request(BASECAM_POWER, "basecam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(BASECAM_POWER, 0);
-
-	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(TURRETCAM_RST_B, 1);
-	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(TURRETCAM_POWER, 0);
-
-	return 0;
-}
-
 #define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
 #define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
 #define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
@@ -356,9 +267,6 @@
 	spi_register_board_info(marxbot_spi_board_info,
 		ARRAY_SIZE(marxbot_spi_board_info));
 
-	marxbot_cam_init();
-	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
-
 	/* battery present pin */
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
index 89fc35a..5cdd7ab 100644
--- a/arch/arm/mach-imx/mx31moboard-smartbot.c
+++ b/arch/arm/mach-imx/mx31moboard-smartbot.c
@@ -23,8 +23,6 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 
-#include <media/soc_camera.h>
-
 #include "board-mx31moboard.h"
 #include "common.h"
 #include "devices-imx31.h"
@@ -37,16 +35,6 @@
 	/* UART1 */
 	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
 	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
-	/* CSI */
-	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
-	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	/* ENABLES */
 	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
@@ -56,65 +44,6 @@
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#define CAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define CAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-
-static int smartbot_cam_power(struct device *dev, int on)
-{
-	gpio_set_value(CAM_POWER, !on);
-	return 0;
-}
-
-static int smartbot_cam_reset(struct device *dev)
-{
-	gpio_set_value(CAM_RST_B, 0);
-	udelay(100);
-	gpio_set_value(CAM_RST_B, 1);
-	return 0;
-}
-
-static struct i2c_board_info smartbot_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	},
-};
-
-static struct soc_camera_link base_iclink = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= smartbot_cam_power,
-	.reset		= smartbot_cam_reset,
-	.board_info	= &smartbot_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device smartbot_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &base_iclink,
-		},
-	},
-};
-
-static struct platform_device *smartbot_cameras[] __initdata = {
-	&smartbot_camera[0],
-};
-
-static int __init smartbot_cam_init(void)
-{
-	int ret = gpio_request(CAM_RST_B, "cam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_RST_B, 1);
-	ret = gpio_request(CAM_POWER, "cam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_POWER, 0);
-
-	return 0;
-}
-
 static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
@@ -201,7 +130,4 @@
 	}
 
 	smartbot_resets_init();
-
-	smartbot_cam_init();
-	platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
 }
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 13a7d72..81ff432 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -29,7 +29,7 @@
 	u8			root_bus_nr;
 	void __iomem		*base;
 	spinlock_t		conf_lock;
-	char			mem_space_name[16];
+	char			mem_space_name[20];
 	struct resource		res;
 };
 
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 46c742d..e62273a 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -184,3 +184,78 @@
 
 CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
 		      &armada_xp_smp_ops);
+
+#define MV98DX3236_CPU_RESUME_CTRL_REG 0x08
+#define MV98DX3236_CPU_RESUME_ADDR_REG 0x04
+
+static const struct of_device_id of_mv98dx3236_resume_table[] = {
+	{
+		.compatible = "marvell,98dx3336-resume-ctrl",
+	},
+	{ /* end of list */ },
+};
+
+static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
+{
+	struct device_node *np;
+	void __iomem *base;
+	WARN_ON(hw_cpu != 1);
+
+	np = of_find_matching_node(NULL, of_mv98dx3236_resume_table);
+	if (!np)
+		return -ENODEV;
+
+	base = of_io_request_and_map(np, 0, of_node_full_name(np));
+	of_node_put(np);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG);
+	writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
+
+	iounmap(base);
+
+	return 0;
+}
+
+static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int ret, hw_cpu;
+
+	hw_cpu = cpu_logical_map(cpu);
+	set_secondary_cpu_clock(hw_cpu);
+	mv98dx3236_resume_set_cpu_boot_addr(hw_cpu,
+					    armada_xp_secondary_startup);
+
+	/*
+	 * This is needed to wake up CPUs in the offline state after
+	 * using CPU hotplug.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	/*
+	 * This is needed to take secondary CPUs out of reset on the
+	 * initial boot.
+	 */
+	ret = mvebu_cpu_reset_deassert(hw_cpu);
+	if (ret) {
+		pr_warn("unable to boot CPU: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct smp_operations mv98dx3236_smp_ops __initconst = {
+	.smp_init_cpus		= armada_xp_smp_init_cpus,
+	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
+	.smp_boot_secondary	= mv98dx3236_boot_secondary,
+	.smp_secondary_init     = armada_xp_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_xp_cpu_die,
+	.cpu_kill               = armada_xp_cpu_kill,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp",
+		      &mv98dx3236_smp_ops);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4f5fd4a..43e3e18 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -720,26 +720,6 @@
  * OMAP specific clock functions shared between omap1 and omap2
  */
 
-int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-	get_option(&str, &mpurate);
-
-	if (!mpurate)
-		return 1;
-
-	if (mpurate < 1000)
-		mpurate *= 1000000;
-
-	return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
 /* Used for clocks that always have same value as the parent clock */
 unsigned long followparent_recalc(struct clk *clk)
 {
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 1e4918a..f2d1be2 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -173,8 +173,6 @@
 	void		(*clk_disable_unused)(struct clk *clk);
 };
 
-extern int mpurate;
-
 extern int clk_init(struct clk_functions *custom_clocks);
 extern void clk_preinit(struct clk *clk);
 extern int clk_register(struct clk *clk);
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index a7c5559..eb76628 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -10,8 +10,6 @@
 
 #include <linux/platform_data/usb-omap1.h>
 
-void omap_otg_init(struct omap_usb_config *config);
-
 #if IS_ENABLED(CONFIG_USB)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 2506e59..455e2cf 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -1,5 +1,5 @@
 /*
- * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
+ * Platform level USB initialization for FS USB OTG controller on omap1
  *
  * Copyright (C) 2004 Texas Instruments, Inc.
  *
@@ -58,11 +58,12 @@
 
 #ifdef	CONFIG_ARCH_OMAP_OTG
 
-void __init
+static void __init
 omap_otg_init(struct omap_usb_config *config)
 {
 	u32		syscon;
 	int		alt_pingroup = 0;
+	u16		w;
 
 	/* NOTE:  no bus or clock setup (yet?) */
 
@@ -87,39 +88,35 @@
 	if (config->otg)
 		syscon |= OTG_EN;
 #endif
-	if (cpu_class_is_omap1())
-		pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
-			 omap_readl(USB_TRANSCEIVER_CTRL));
+	pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+		 omap_readl(USB_TRANSCEIVER_CTRL));
 	pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
 	omap_writel(syscon, OTG_SYSCON_2);
 
 	printk("USB: hmc %d", config->hmc_mode);
 	if (!alt_pingroup)
-		printk(", usb2 alt %d wires", config->pins[2]);
+		pr_cont(", usb2 alt %d wires", config->pins[2]);
 	else if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
+		pr_cont(", usb0 %d wires%s", config->pins[0],
 			is_usb0_device(config) ? " (dev)" : "");
 	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
+		pr_cont(", usb1 %d wires", config->pins[1]);
 	if (!alt_pingroup && config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
+		pr_cont(", usb2 %d wires", config->pins[2]);
 	if (config->otg)
-		printk(", Mini-AB on usb%d", config->otg - 1);
-	printk("\n");
+		pr_cont(", Mini-AB on usb%d", config->otg - 1);
+	pr_cont("\n");
 
-	if (cpu_class_is_omap1()) {
-		u16 w;
+	/* leave USB clocks/controllers off until needed */
+	w = omap_readw(ULPD_SOFT_REQ);
+	w &= ~SOFT_USB_CLK_REQ;
+	omap_writew(w, ULPD_SOFT_REQ);
 
-		/* leave USB clocks/controllers off until needed */
-		w = omap_readw(ULPD_SOFT_REQ);
-		w &= ~SOFT_USB_CLK_REQ;
-		omap_writew(w, ULPD_SOFT_REQ);
+	w = omap_readw(ULPD_CLOCK_CTRL);
+	w &= ~USB_MCLK_EN;
+	w |= DIS_USB_PVCI_CLK;
+	omap_writew(w, ULPD_CLOCK_CTRL);
 
-		w = omap_readw(ULPD_CLOCK_CTRL);
-		w &= ~USB_MCLK_EN;
-		w |= DIS_USB_PVCI_CLK;
-		omap_writew(w, ULPD_CLOCK_CTRL);
-	}
 	syscon = omap_readl(OTG_SYSCON_1);
 	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
 
@@ -166,7 +163,7 @@
 }
 
 #else
-void omap_otg_init(struct omap_usb_config *config) {}
+static void omap_otg_init(struct omap_usb_config *config) {}
 #endif
 
 #if IS_ENABLED(CONFIG_USB_OMAP)
@@ -573,13 +570,13 @@
 
 	printk("USB: hmc %d", config->hmc_mode);
 	if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
+		pr_cont(", usb0 %d wires%s", config->pins[0],
 			is_usb0_device(config) ? " (dev)" : "");
 	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
+		pr_cont(", usb1 %d wires", config->pins[1]);
 	if (config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
-	printk("\n");
+		pr_cont(", usb2 %d wires", config->pins[2]);
+	pr_cont("\n");
 
 	/* use DPLL for 48 MHz function clock */
 	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d058125..1270afd 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -78,8 +78,6 @@
  * OMAP2+ specific clock functions
  */
 
-/* Private functions */
-
 /* Public functions */
 
 /**
@@ -112,65 +110,6 @@
 	}
 }
 
-static int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-	get_option(&str, &mpurate);
-
-	if (!mpurate)
-		return 1;
-
-	if (mpurate < 1000)
-		mpurate *= 1000000;
-
-	return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
-/**
- * omap2_clk_print_new_rates - print summary of current clock tree rates
- * @hfclkin_ck_name: clk name for the off-chip HF oscillator
- * @core_ck_name: clk name for the on-chip CORE_CLK
- * @mpu_ck_name: clk name for the ARM MPU clock
- *
- * Prints a short message to the console with the HFCLKIN oscillator
- * rate, the rate of the CORE clock, and the rate of the ARM MPU clock.
- * Called by the boot-time MPU rate switching code.   XXX This is intended
- * to be handled by the OPP layer code in the near future and should be
- * removed from the clock code.  No return value.
- */
-void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
-				      const char *core_ck_name,
-				      const char *mpu_ck_name)
-{
-	struct clk *hfclkin_ck, *core_ck, *mpu_ck;
-	unsigned long hfclkin_rate;
-
-	mpu_ck = clk_get(NULL, mpu_ck_name);
-	if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name))
-		return;
-
-	core_ck = clk_get(NULL, core_ck_name);
-	if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name))
-		return;
-
-	hfclkin_ck = clk_get(NULL, hfclkin_ck_name);
-	if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name))
-		return;
-
-	hfclkin_rate = clk_get_rate(hfclkin_ck);
-
-	pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
-		(hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10),
-		(clk_get_rate(core_ck) / 1000000),
-		(clk_get_rate(mpu_ck) / 1000000));
-}
-
 /**
  * ti_clk_init_features - init clock features struct for the SoC
  *
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 67da640..4e66295 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -64,10 +64,6 @@
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
-			       const char *core_ck_name,
-			       const char *mpu_ck_name);
-
 extern u16 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index e71cca0..8fa01c0 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -46,8 +46,6 @@
 #define DISPC_CONTROL3		0x0848
 #define DISPC_IRQSTATUS		0x0018
 
-#define DSS_SYSCONFIG		0x10
-#define DSS_SYSSTATUS		0x14
 #define DSS_CONTROL		0x40
 #define DSS_SDI_CONTROL		0x44
 #define DSS_PLL_CONTROL		0x48
@@ -76,36 +74,6 @@
 	},
 };
 
-struct omap_dss_hwmod_data {
-	const char *oh_name;
-	const char *dev_name;
-	const int id;
-};
-
-static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initconst = {
-	{ "dss_core", "omapdss_dss", -1 },
-	{ "dss_dispc", "omapdss_dispc", -1 },
-	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_venc", "omapdss_venc", -1 },
-};
-
-static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initconst = {
-	{ "dss_core", "omapdss_dss", -1 },
-	{ "dss_dispc", "omapdss_dispc", -1 },
-	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_venc", "omapdss_venc", -1 },
-	{ "dss_dsi1", "omapdss_dsi", 0 },
-};
-
-static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
-	{ "dss_core", "omapdss_dss", -1 },
-	{ "dss_dispc", "omapdss_dispc", -1 },
-	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_dsi1", "omapdss_dsi", 0 },
-	{ "dss_dsi2", "omapdss_dsi", 1 },
-	{ "dss_hdmi", "omapdss_hdmi", -1 },
-};
-
 #define OMAP4_DSIPHY_SYSCON_OFFSET		0x78
 
 static struct regmap *omap4_dsi_mux_syscon;
@@ -162,104 +130,6 @@
 	return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput);
 }
 
-static struct platform_device *create_dss_pdev(const char *pdev_name,
-		int pdev_id, const char *oh_name, void *pdata, int pdata_len,
-		struct platform_device *parent)
-{
-	struct platform_device *pdev;
-	struct omap_device *od;
-	struct omap_hwmod *ohs[1];
-	struct omap_hwmod *oh;
-	int r;
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		r = -ENODEV;
-		goto err;
-	}
-
-	pdev = platform_device_alloc(pdev_name, pdev_id);
-	if (!pdev) {
-		pr_err("Could not create pdev for %s\n", pdev_name);
-		r = -ENOMEM;
-		goto err;
-	}
-
-	if (parent != NULL)
-		pdev->dev.parent = &parent->dev;
-
-	if (pdev->id != -1)
-		dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
-	else
-		dev_set_name(&pdev->dev, "%s", pdev->name);
-
-	ohs[0] = oh;
-	od = omap_device_alloc(pdev, ohs, 1);
-	if (IS_ERR(od)) {
-		pr_err("Could not alloc omap_device for %s\n", pdev_name);
-		r = -ENOMEM;
-		goto err;
-	}
-
-	r = platform_device_add_data(pdev, pdata, pdata_len);
-	if (r) {
-		pr_err("Could not set pdata for %s\n", pdev_name);
-		goto err;
-	}
-
-	r = omap_device_register(pdev);
-	if (r) {
-		pr_err("Could not register omap_device for %s\n", pdev_name);
-		goto err;
-	}
-
-	return pdev;
-
-err:
-	return ERR_PTR(r);
-}
-
-static struct platform_device *create_simple_dss_pdev(const char *pdev_name,
-		int pdev_id, void *pdata, int pdata_len,
-		struct platform_device *parent)
-{
-	struct platform_device *pdev;
-	int r;
-
-	pdev = platform_device_alloc(pdev_name, pdev_id);
-	if (!pdev) {
-		pr_err("Could not create pdev for %s\n", pdev_name);
-		r = -ENOMEM;
-		goto err;
-	}
-
-	if (parent != NULL)
-		pdev->dev.parent = &parent->dev;
-
-	if (pdev->id != -1)
-		dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
-	else
-		dev_set_name(&pdev->dev, "%s", pdev->name);
-
-	r = platform_device_add_data(pdev, pdata, pdata_len);
-	if (r) {
-		pr_err("Could not set pdata for %s\n", pdev_name);
-		goto err;
-	}
-
-	r = platform_device_add(pdev);
-	if (r) {
-		pr_err("Could not register platform_device for %s\n", pdev_name);
-		goto err;
-	}
-
-	return pdev;
-
-err:
-	return ERR_PTR(r);
-}
-
 static enum omapdss_version __init omap_display_get_version(void)
 {
 	if (cpu_is_omap24xx())
@@ -293,132 +163,6 @@
 		return OMAPDSS_VER_UNKNOWN;
 }
 
-int __init omap_display_init(struct omap_dss_board_info *board_data)
-{
-	int r = 0;
-	struct platform_device *pdev;
-	int i, oh_count;
-	const struct omap_dss_hwmod_data *curr_dss_hwmod;
-	struct platform_device *dss_pdev;
-	enum omapdss_version ver;
-
-	/* create omapdss device */
-
-	ver = omap_display_get_version();
-
-	if (ver == OMAPDSS_VER_UNKNOWN) {
-		pr_err("DSS not supported on this SoC\n");
-		return -ENODEV;
-	}
-
-	board_data->version = ver;
-	board_data->dsi_enable_pads = omap_dsi_enable_pads;
-	board_data->dsi_disable_pads = omap_dsi_disable_pads;
-	board_data->set_min_bus_tput = omap_dss_set_min_bus_tput;
-
-	omap_display_device.dev.platform_data = board_data;
-
-	r = platform_device_register(&omap_display_device);
-	if (r < 0) {
-		pr_err("Unable to register omapdss device\n");
-		return r;
-	}
-
-	/* create devices for dss hwmods */
-
-	if (cpu_is_omap24xx()) {
-		curr_dss_hwmod = omap2_dss_hwmod_data;
-		oh_count = ARRAY_SIZE(omap2_dss_hwmod_data);
-	} else if (cpu_is_omap34xx()) {
-		curr_dss_hwmod = omap3_dss_hwmod_data;
-		oh_count = ARRAY_SIZE(omap3_dss_hwmod_data);
-	} else {
-		curr_dss_hwmod = omap4_dss_hwmod_data;
-		oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
-	}
-
-	/*
-	 * First create the pdev for dss_core, which is used as a parent device
-	 * by the other dss pdevs. Note: dss_core has to be the first item in
-	 * the hwmod list.
-	 */
-	dss_pdev = create_dss_pdev(curr_dss_hwmod[0].dev_name,
-			curr_dss_hwmod[0].id,
-			curr_dss_hwmod[0].oh_name,
-			board_data, sizeof(*board_data),
-			NULL);
-
-	if (IS_ERR(dss_pdev)) {
-		pr_err("Could not build omap_device for %s\n",
-				curr_dss_hwmod[0].oh_name);
-
-		return PTR_ERR(dss_pdev);
-	}
-
-	for (i = 1; i < oh_count; i++) {
-		pdev = create_dss_pdev(curr_dss_hwmod[i].dev_name,
-				curr_dss_hwmod[i].id,
-				curr_dss_hwmod[i].oh_name,
-				board_data, sizeof(*board_data),
-				dss_pdev);
-
-		if (IS_ERR(pdev)) {
-			pr_err("Could not build omap_device for %s\n",
-					curr_dss_hwmod[i].oh_name);
-
-			return PTR_ERR(pdev);
-		}
-	}
-
-	/* Create devices for DPI and SDI */
-
-	pdev = create_simple_dss_pdev("omapdss_dpi", 0,
-			board_data, sizeof(*board_data), dss_pdev);
-	if (IS_ERR(pdev)) {
-		pr_err("Could not build platform_device for omapdss_dpi\n");
-		return PTR_ERR(pdev);
-	}
-
-	if (cpu_is_omap34xx()) {
-		pdev = create_simple_dss_pdev("omapdss_sdi", 0,
-				board_data, sizeof(*board_data), dss_pdev);
-		if (IS_ERR(pdev)) {
-			pr_err("Could not build platform_device for omapdss_sdi\n");
-			return PTR_ERR(pdev);
-		}
-	}
-
-	/* create DRM device */
-	r = omap_init_drm();
-	if (r < 0) {
-		pr_err("Unable to register omapdrm device\n");
-		return r;
-	}
-
-	/* create vrfb device */
-	r = omap_init_vrfb();
-	if (r < 0) {
-		pr_err("Unable to register omapvrfb device\n");
-		return r;
-	}
-
-	/* create FB device */
-	r = omap_init_fb();
-	if (r < 0) {
-		pr_err("Unable to register omapfb device\n");
-		return r;
-	}
-
-	/* create V4L2 display device */
-	r = omap_init_vout();
-	if (r < 0) {
-		pr_err("Unable to register omap_vout device\n");
-		return r;
-	}
-
-	return 0;
-}
-
 static void dispc_disable_outputs(void)
 {
 	u32 v, irq_mask = 0;
@@ -573,7 +317,7 @@
 	"ti,dra7-dss",
 };
 
-struct device_node * __init omapdss_find_dss_of_node(void)
+static struct device_node * __init omapdss_find_dss_of_node(void)
 {
 	struct device_node *node;
 	int i;
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
index 78f2530..9a39646 100644
--- a/arch/arm/mach-omap2/display.h
+++ b/arch/arm/mach-omap2/display.h
@@ -31,11 +31,4 @@
 int omap_init_fb(void);
 int omap_init_vout(void);
 
-struct device_node * __init omapdss_find_dss_of_node(void);
-
-struct omap_dss_board_info;
-
-/* Init with the board info */
-int omap_display_init(struct omap_dss_board_info *board_data);
-
 #endif
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e8b9887..0da4f2e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3249,6 +3249,36 @@
 }
 
 /**
+ * omap_hwmod_setup_earlycon_flags - set up flags for early console
+ *
+ * Enable DEBUG_OMAPUART_FLAGS for uart hwmod that is being used as
+ * early concole so that hwmod core doesn't reset and keep it in idle
+ * that specific uart.
+ */
+#ifdef CONFIG_SERIAL_EARLYCON
+static void __init omap_hwmod_setup_earlycon_flags(void)
+{
+	struct device_node *np;
+	struct omap_hwmod *oh;
+	const char *uart;
+
+	np = of_find_node_by_path("/chosen");
+	if (np) {
+		uart = of_get_property(np, "stdout-path", NULL);
+		if (uart) {
+			np = of_find_node_by_path(uart);
+			if (np) {
+				uart = of_get_property(np, "ti,hwmods", NULL);
+				oh = omap_hwmod_lookup(uart);
+				if (oh)
+					oh->flags |= DEBUG_OMAPUART_FLAGS;
+			}
+		}
+	}
+}
+#endif
+
+/**
  * omap_hwmod_setup_all - set up all registered IP blocks
  *
  * Initialize and set up all IP blocks registered with the hwmod code.
@@ -3261,6 +3291,9 @@
 	_ensure_mpu_hwmod_is_setup(NULL);
 
 	omap_hwmod_for_each(_init, NULL);
+#ifdef CONFIG_SERIAL_EARLYCON
+	omap_hwmod_setup_earlycon_flags();
+#endif
 	omap_hwmod_for_each(_setup, NULL);
 
 	return 0;
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 0b8300e..a057cf9 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -696,32 +696,7 @@
 };
 #endif /* CONFIG_MACH_EZX_E2 */
 
-#ifdef CONFIG_MACH_EZX_A780
-/* gpio_keys */
-static struct gpio_keys_button a780_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO12_A780_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A780 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
-	.buttons  = a780_buttons,
-	.nbuttons = ARRAY_SIZE(a780_buttons),
-};
-
-static struct platform_device a780_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a780_gpio_keys_platform_data,
-	},
-};
-
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
 /* camera */
 static struct regulator_consumer_supply camera_dummy_supplies[] = {
 	REGULATOR_SUPPLY("vdd", "0-005d"),
@@ -750,6 +725,35 @@
 		.platform_data = &camera_dummy_config,
 	},
 };
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO12_A780_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A780 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+	.buttons  = a780_buttons,
+	.nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a780_gpio_keys_platform_data,
+	},
+};
+
+/* camera */
 static int a780_camera_reset(struct device *dev)
 {
 	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index d1db32b..88e0068 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
 
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c
index 2bb0896..ad8f4cd 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c24xx/bast-irq.c
@@ -44,7 +44,7 @@
 /* table of ISA irq nos to the relevant mask... zero means
  * the irq is not implemented
 */
-static unsigned char bast_pc104_irqmasks[] = {
+static const unsigned char bast_pc104_irqmasks[] = {
 	0,   /* 0 */
 	0,   /* 1 */
 	0,   /* 2 */
@@ -63,7 +63,7 @@
 	0,   /* 15 */
 };
 
-static unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
+static const unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
 
 static void
 bast_pc104_mask(struct irq_data *data)
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
index 65e5f9c..b7970f1 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
@@ -249,7 +249,7 @@
 	return 0;
 }
 
-static unsigned int tacc_tab[] = {
+static const unsigned int tacc_tab[] = {
 	[0]	= 1,
 	[1]	= 2,
 	[2]	= 3,
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index d75f95e..0ae4d47 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -53,7 +53,7 @@
 }
 
 /* mapping of interrupts to parts of the wakeup mask */
-static struct samsung_wakeup_mask wake_irqs[] = {
+static const struct samsung_wakeup_mask wake_irqs[] = {
 	{ .irq = IRQ_RTC,	.bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
 };
 
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 7c66ce1a..9843eb4 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -56,7 +56,8 @@
 #include "watchdog-reset.h"
 
 /* External clock frequency */
-static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+static unsigned long xtal_f __ro_after_init = 12000000;
+static unsigned long xusbxti_f __ro_after_init = 48000000;
 
 void __init s3c64xx_set_xtal_freq(unsigned long freq)
 {
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 247dcc0..cb953e2 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -58,9 +58,6 @@
 
 static struct s3c_audio_pdata i2s0_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_playback = DMACH_I2S0_OUT,
-	.dma_capture = DMACH_I2S0_IN,
 };
 
 struct platform_device s3c64xx_device_iis0 = {
@@ -80,9 +77,6 @@
 
 static struct s3c_audio_pdata i2s1_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_playback = DMACH_I2S1_OUT,
-	.dma_capture = DMACH_I2S1_IN,
 };
 
 struct platform_device s3c64xx_device_iis1 = {
@@ -102,9 +96,6 @@
 
 static struct s3c_audio_pdata i2sv4_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_playback = DMACH_HSI_I2SV40_TX,
-	.dma_capture = DMACH_HSI_I2SV40_RX,
 	.type = {
 		.quirks = QUIRK_PRI_6CHAN,
 	},
@@ -151,9 +142,6 @@
 
 static struct s3c_audio_pdata s3c_pcm0_pdata = {
 	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_capture = DMACH_PCM0_RX,
-	.dma_playback = DMACH_PCM0_TX,
 };
 
 struct platform_device s3c64xx_device_pcm0 = {
@@ -173,9 +161,6 @@
 
 static struct s3c_audio_pdata s3c_pcm1_pdata = {
 	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-	.dma_filter = pl08x_filter_id,
-	.dma_playback = DMACH_PCM1_TX,
-	.dma_capture = DMACH_PCM1_RX,
 };
 
 struct platform_device s3c64xx_device_pcm1 = {
@@ -207,10 +192,6 @@
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata = {
-	.dma_playback = DMACH_AC97_PCMOUT,
-	.dma_filter = pl08x_filter_id,
-	.dma_capture = DMACH_AC97_PCMIN,
-	.dma_capture_mic = DMACH_AC97_MICIN,
 };
 
 static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 59d91b8..b0be382 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -285,7 +285,7 @@
 }
 
 /* mapping of interrupts to parts of the wakeup mask */
-static struct samsung_wakeup_mask wake_irqs[] = {
+static const struct samsung_wakeup_mask wake_irqs[] = {
 	{ .irq = IRQ_RTC_ALARM,	.bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
 	{ .irq = IRQ_RTC_TIC,	.bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
 	{ .irq = IRQ_PENDN,	.bit = S3C64XX_PWRCFG_TS_DISABLE, },
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 0c6bb45..e192668 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -31,9 +31,21 @@
 	int bit;
 } apmu_cpus[NR_CPUS];
 
-#define WUPCR_OFFS 0x10
-#define PSTR_OFFS 0x40
-#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n)))
+#define WUPCR_OFFS	 0x10		/* Wake Up Control Register */
+#define PSTR_OFFS	 0x40		/* Power Status Register */
+#define CPUNCR_OFFS(n)	(0x100 + (0x10 * (n)))
+					/* CPUn Power Status Control Register */
+#define DBGRCR_OFFS	0x180		/* Debug Resource Reset Control Reg. */
+
+/* Power Status Register */
+#define CPUNST(r, n)	(((r) >> (n * 4)) & 3)	/* CPUn Status Bit */
+#define CPUST_RUN	0		/* Run Mode */
+#define CPUST_STANDBY	3		/* CoreStandby Mode */
+
+/* Debug Resource Reset Control Register */
+#define DBGCPUREN	BIT(24)		/* CPU Other Reset Request Enable */
+#define DBGCPUNREN(n)	BIT((n) + 20)	/* CPUn Reset Request Enable */
+#define DBGCPUPREN	BIT(19)		/* CPU Peripheral Reset Req. Enable */
 
 static int __maybe_unused apmu_power_on(void __iomem *p, int bit)
 {
@@ -59,7 +71,7 @@
 	int k;
 
 	for (k = 0; k < 1000; k++) {
-		if (((readl_relaxed(p + PSTR_OFFS) >> (bit * 4)) & 0x03) == 3)
+		if (CPUNST(readl_relaxed(p + PSTR_OFFS), bit) == CPUST_STANDBY)
 			return 1;
 
 		mdelay(1);
@@ -78,6 +90,8 @@
 #ifdef CONFIG_SMP
 static void apmu_init_cpu(struct resource *res, int cpu, int bit)
 {
+	u32 x;
+
 	if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem)
 		return;
 
@@ -85,6 +99,11 @@
 	apmu_cpus[cpu].bit = bit;
 
 	pr_debug("apmu ioremap %d %d %pr\n", cpu, bit, res);
+
+	/* Setup for debug mode */
+	x = readl(apmu_cpus[cpu].iomem + DBGRCR_OFFS);
+	x |= DBGCPUREN | DBGCPUNREN(bit) | DBGCPUPREN;
+	writel(x, apmu_cpus[cpu].iomem + DBGRCR_OFFS);
 }
 
 static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
@@ -197,21 +216,9 @@
 	rcar_gen2_pm_init();
 }
 
-static int shmobile_smp_apmu_boot_secondary_md21(unsigned int cpu,
-						 struct task_struct *idle)
-{
-	/* Error out when hardware debug mode is enabled */
-	if (rcar_gen2_read_mode_pins() & BIT(21)) {
-		pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
-		return -ENOTSUPP;
-	}
-
-	return shmobile_smp_apmu_boot_secondary(cpu, idle);
-}
-
 static struct smp_operations apmu_smp_ops __initdata = {
 	.smp_prepare_cpus	= shmobile_smp_apmu_prepare_cpus_dt,
-	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary_md21,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_can_disable	= shmobile_smp_cpu_can_disable,
 	.cpu_die		= shmobile_smp_apmu_cpu_die,
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index dd9ac36..0178da7 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -20,14 +20,30 @@
 
 /* RST */
 #define RST		0xe6160000
-#define CA15BAR		0x0020
-#define CA7BAR		0x0030
-#define CA15RESCNT	0x0040
-#define CA7RESCNT	0x0044
+
+#define CA15BAR		0x0020		/* CA15 Boot Address Register */
+#define CA7BAR		0x0030		/* CA7 Boot Address Register */
+#define CA15RESCNT	0x0040		/* CA15 Reset Control Register */
+#define CA7RESCNT	0x0044		/* CA7 Reset Control Register */
+
+/* SYS Boot Address Register */
+#define SBAR_BAREN	BIT(4)		/* SBAR is valid */
+
+/* Reset Control Registers */
+#define CA15RESCNT_CODE	0xa5a50000
+#define CA15RESCNT_CPUS	0xf		/* CPU0-3 */
+#define CA7RESCNT_CODE	0x5a5a0000
+#define CA7RESCNT_CPUS	0xf		/* CPU0-3 */
+
 
 /* On-chip RAM */
 #define ICRAM1		0xe63c0000	/* Inter Connect RAM1 (4 KiB) */
 
+static inline u32 phys_to_sbar(phys_addr_t addr)
+{
+	return (addr >> 8) & 0xfffffc00;
+}
+
 /* SYSC */
 #define SYSCIER 0x0c
 #define SYSCIMR 0x10
@@ -82,22 +98,24 @@
 
 	/* setup reset vectors */
 	p = ioremap_nocache(RST, 0x63);
-	bar = (boot_vector_addr >> 8) & 0xfffffc00;
+	bar = phys_to_sbar(boot_vector_addr);
 	if (has_a15) {
 		writel_relaxed(bar, p + CA15BAR);
-		writel_relaxed(bar | 0x10, p + CA15BAR);
+		writel_relaxed(bar | SBAR_BAREN, p + CA15BAR);
 
 		/* de-assert reset for CA15 CPUs */
-		writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) |
-				0xa5a50000, p + CA15RESCNT);
+		writel_relaxed((readl_relaxed(p + CA15RESCNT) &
+				~CA15RESCNT_CPUS) | CA15RESCNT_CODE,
+			       p + CA15RESCNT);
 	}
 	if (has_a7) {
 		writel_relaxed(bar, p + CA7BAR);
-		writel_relaxed(bar | 0x10, p + CA7BAR);
+		writel_relaxed(bar | SBAR_BAREN, p + CA7BAR);
 
 		/* de-assert reset for CA7 CPUs */
-		writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) |
-				0x5a5a0000, p + CA7RESCNT);
+		writel_relaxed((readl_relaxed(p + CA7RESCNT) &
+				~CA7RESCNT_CPUS) | CA7RESCNT_CODE,
+			       p + CA7RESCNT);
 	}
 	iounmap(p);
 
diff --git a/arch/arm/mach-shmobile/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h
index 8a66b4a..6792e24 100644
--- a/arch/arm/mach-shmobile/rcar-gen2.h
+++ b/arch/arm/mach-shmobile/rcar-gen2.h
@@ -2,8 +2,6 @@
 #define __ASM_RCAR_GEN2_H__
 
 void rcar_gen2_timer_init(void);
-#define MD(nr) BIT(nr)
-u32 rcar_gen2_read_mode_pins(void);
 void rcar_gen2_reserve(void);
 void rcar_gen2_pm_init(void);
 
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index ac63fa4..52d466b 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -29,24 +29,6 @@
 #include "common.h"
 #include "rcar-gen2.h"
 
-#define MODEMR 0xe6160060
-
-u32 rcar_gen2_read_mode_pins(void)
-{
-	static u32 mode;
-	static bool mode_valid;
-
-	if (!mode_valid) {
-		void __iomem *modemr = ioremap_nocache(MODEMR, 4);
-		BUG_ON(!modemr);
-		mode = ioread32(modemr);
-		iounmap(modemr);
-		mode_valid = true;
-	}
-
-	return mode;
-}
-
 static unsigned int __init get_extal_freq(void)
 {
 	struct device_node *cpg, *extal;
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index 2d6417a..2948c22 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -42,21 +42,9 @@
 	rcar_gen2_pm_init();
 }
 
-static int r8a7791_smp_boot_secondary(unsigned int cpu,
-				      struct task_struct *idle)
-{
-	/* Error out when hardware debug mode is enabled */
-	if (rcar_gen2_read_mode_pins() & BIT(21)) {
-		pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
-		return -ENOTSUPP;
-	}
-
-	return shmobile_smp_apmu_boot_secondary(cpu, idle);
-}
-
 const struct smp_operations r8a7791_smp_ops __initconst = {
 	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
-	.smp_boot_secondary	= r8a7791_smp_boot_secondary,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_can_disable	= shmobile_smp_cpu_can_disable,
 	.cpu_die		= shmobile_smp_apmu_cpu_die,
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 2e2bde2..f44e3ac 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -63,7 +63,9 @@
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
 	"allwinner,sun8i-a83t",
+	"allwinner,sun8i-h2-plus",
 	"allwinner,sun8i-h3",
+	"allwinner,sun8i-v3s",
 	NULL,
 };
 
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 7478f6f..ea6bff4 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -23,7 +23,7 @@
 
 #include "board.h"
 
-static struct property_entry __initdata wifi_rfkill_prop[] = {
+static struct property_entry wifi_rfkill_prop[] __initdata = {
 	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
 	PROPERTY_ENTRY_STRING("type", "wlan"),
 	{ },
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 56d0eb6..c2499bf 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -4,7 +4,6 @@
 
 obj-y				:= pm.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
deleted file mode 100644
index b2a0899..0000000
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <linux/platform_data/asoc-ux500-msp.h>
-
-#include "ste-dma40-db8500.h"
-#include "board-mop500.h"
-
-static struct stedma40_chan_cfg msp0_dma_rx = {
-	.high_priority = true,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
-};
-
-static struct stedma40_chan_cfg msp0_dma_tx = {
-	.high_priority = true,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
-};
-
-struct msp_i2s_platform_data msp0_platform_data = {
-	.id = 0,
-	.msp_i2s_dma_rx = &msp0_dma_rx,
-	.msp_i2s_dma_tx = &msp0_dma_tx,
-};
-
-static struct stedma40_chan_cfg msp1_dma_rx = {
-	.high_priority = true,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV30_MSP3,
-};
-
-static struct stedma40_chan_cfg msp1_dma_tx = {
-	.high_priority = true,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV30_MSP1,
-};
-
-struct msp_i2s_platform_data msp1_platform_data = {
-	.id = 1,
-	.msp_i2s_dma_rx = NULL,
-	.msp_i2s_dma_tx = &msp1_dma_tx,
-};
-
-static struct stedma40_chan_cfg msp2_dma_rx = {
-	.high_priority = true,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV14_MSP2,
-};
-
-static struct stedma40_chan_cfg msp2_dma_tx = {
-	.high_priority = true,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV14_MSP2,
-	.use_fixed_channel = true,
-	.phy_channel = 1,
-};
-
-struct msp_i2s_platform_data msp2_platform_data = {
-	.id = 2,
-	.msp_i2s_dma_rx = &msp2_dma_rx,
-	.msp_i2s_dma_tx = &msp2_dma_tx,
-};
-
-struct msp_i2s_platform_data msp3_platform_data = {
-	.id		= 3,
-	.msp_i2s_dma_rx	= &msp1_dma_rx,
-	.msp_i2s_dma_tx	= NULL,
-};
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
deleted file mode 100644
index 7c7b0ad..0000000
--- a/arch/arm/mach-ux500/board-mop500.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __BOARD_MOP500_H
-#define __BOARD_MOP500_H
-
-#include <linux/platform_data/asoc-ux500-msp.h>
-
-extern struct msp_i2s_platform_data msp0_platform_data;
-extern struct msp_i2s_platform_data msp1_platform_data;
-extern struct msp_i2s_platform_data msp2_platform_data;
-extern struct msp_i2s_platform_data msp3_platform_data;
-
-#endif
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 46b1da1..24529cf 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
@@ -34,7 +33,6 @@
 
 #include "setup.h"
 
-#include "board-mop500.h"
 #include "db8500-regs.h"
 
 static int __init ux500_l2x0_unlock(void)
@@ -142,21 +140,6 @@
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
-	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
-		       "ux500-msp-i2s.0", &msp0_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
-		       "ux500-msp-i2s.1", &msp1_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
-		       "ux500-msp-i2s.2", &msp2_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
-		       "ux500-msp-i2s.3", &msp3_platform_data),
-	/* Requires non-DT:able platform data. */
-	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
-	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
-	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
-	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
-			NULL),
 	{},
 };
 
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 8f2f615..e0ee139 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -31,10 +31,14 @@
 #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
 #define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
 
-static void wakeup_secondary(void)
+static void __iomem *backupram;
+
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
 {
 	struct device_node *np;
-	static void __iomem *backupram;
+	static void __iomem *scu_base;
+	unsigned int ncores;
+	int i;
 
 	np = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram");
 	if (!np) {
@@ -48,29 +52,6 @@
 		return;
 	}
 
-	/*
-	 * write the address of secondary startup into the backup ram register
-	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
-	 * backup ram register at offset 0x1FF0, which is what boot rom code
-	 * is waiting for. This will wake up the secondary core from WFE.
-	 */
-	writel(virt_to_phys(secondary_startup),
-	       backupram + UX500_CPU1_JUMPADDR_OFFSET);
-	writel(0xA1FEED01,
-	       backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
-
-	/* make sure write buffer is drained */
-	mb();
-	iounmap(backupram);
-}
-
-static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
-{
-	struct device_node *np;
-	static void __iomem *scu_base;
-	unsigned int ncores;
-	int i;
-
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
 	if (!np) {
 		pr_err("No SCU base address\n");
@@ -92,7 +73,19 @@
 
 static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	wakeup_secondary();
+	/*
+	 * write the address of secondary startup into the backup ram register
+	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+	 * backup ram register at offset 0x1FF0, which is what boot rom code
+	 * is waiting for. This will wake up the secondary core from WFE.
+	 */
+	writel(virt_to_phys(secondary_startup),
+	       backupram + UX500_CPU1_JUMPADDR_OFFSET);
+	writel(0xA1FEED01,
+	       backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
+
+	/* make sure write buffer is drained */
+	mb();
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 	return 0;
 }
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
deleted file mode 100644
index 0296ae5..0000000
--- a/arch/arm/mach-ux500/ste-dma40-db8500.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * arch/arm/mach-ux500/ste_dma40_db8500.h
- * DB8500-SoC-specific configuration for DMA40
- *
- * Copyright (C) ST-Ericsson 2007-2010
- * License terms: GNU General Public License (GPL) version 2
- * Author: Per Friden <per.friden@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-#ifndef STE_DMA40_DB8500_H
-#define STE_DMA40_DB8500_H
-
-#define DB8500_DMA_NR_DEV 64
-
-/*
- * Unless otherwise specified, all channels numbers are used for
- * TX & RX, and can be used for either source or destination
- * channels.
- */
-enum dma_dev_type {
-	DB8500_DMA_DEV0_SPI0 = 0,
-	DB8500_DMA_DEV1_SD_MMC0 = 1,
-	DB8500_DMA_DEV2_SD_MMC1 = 2,
-	DB8500_DMA_DEV3_SD_MMC2 = 3,
-	DB8500_DMA_DEV4_I2C1 = 4,
-	DB8500_DMA_DEV5_I2C3 = 5,
-	DB8500_DMA_DEV6_I2C2 = 6,
-	DB8500_DMA_DEV7_I2C4 = 7,			/* Only on V1 and later */
-	DB8500_DMA_DEV8_SSP0 = 8,
-	DB8500_DMA_DEV9_SSP1 = 9,
-	DB8500_DMA_DEV10_MCDE_RX = 10,			/* RX only */
-	DB8500_DMA_DEV11_UART2 = 11,
-	DB8500_DMA_DEV12_UART1 = 12,
-	DB8500_DMA_DEV13_UART0 = 13,
-	DB8500_DMA_DEV14_MSP2 = 14,
-	DB8500_DMA_DEV15_I2C0 = 15,
-	DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16,
-	DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17,
-	DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18,
-	DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19,
-	DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20,
-	DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21,
-	DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22,
-	DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23,
-	DB8500_DMA_DEV24_SXA0 = 24,
-	DB8500_DMA_DEV25_SXA1 = 25,
-	DB8500_DMA_DEV26_SXA2 = 26,
-	DB8500_DMA_DEV27_SXA3 = 27,
-	DB8500_DMA_DEV28_SD_MM2 = 28,
-	DB8500_DMA_DEV29_SD_MM0 = 29,
-	DB8500_DMA_DEV30_MSP1 = 30,
-	/* On DB8500v2, MSP3 RX replaces MSP1 RX */
-	DB8500_DMA_DEV30_MSP3 = 30,
-	DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31,
-	DB8500_DMA_DEV32_SD_MM1 = 32,
-	DB8500_DMA_DEV33_SPI2 = 33,
-	DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34,
-	DB8500_DMA_DEV35_SPI1 = 35,
-	DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36,
-	DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37,
-	DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38,
-	DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39,
-	DB8500_DMA_DEV40_SPI3 = 40,
-	DB8500_DMA_DEV41_SD_MM3 = 41,
-	DB8500_DMA_DEV42_SD_MM4 = 42,
-	DB8500_DMA_DEV43_SD_MM5 = 43,
-	DB8500_DMA_DEV44_SXA4 = 44,
-	DB8500_DMA_DEV45_SXA5 = 45,
-	DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46,
-	DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47,
-	DB8500_DMA_DEV48_CAC1 = 48,
-	DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,		/* TX only */
-	DB8500_DMA_DEV50_HAC1_TX = 50,			/* TX only */
-	DB8500_DMA_MEMCPY_TX_0 = 51,			/* TX only */
-	DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52,
-	DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53,
-	DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54,
-	DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55,
-	/* 56 -> 60 are channels reserved for memcpy only */
-	DB8500_DMA_DEV61_CAC0 = 61,
-	DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,		/* TX only */
-	DB8500_DMA_DEV63_HAC0_TX = 63,			/* TX only */
-};
-
-#endif
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index cf7b95f..03fac12 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -77,15 +77,6 @@
 	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
 };
 
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-#ifdef CONFIG_S3C24XX_DMAC
-	.dma_filter = s3c24xx_dma_filter,
-#endif
-	.dma_playback = (void *)DMACH_PCM_OUT,
-	.dma_capture = (void *)DMACH_PCM_IN,
-	.dma_capture_mic = (void *)DMACH_MIC_IN,
-};
-
 struct platform_device s3c_device_ac97 = {
 	.name		= "samsung-ac97",
 	.id		= -1,
@@ -94,7 +85,6 @@
 	.dev		= {
 		.dma_mask		= &samsung_device_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_ac97_pdata,
 	}
 };
 #endif /* CONFIG_CPU_S3C2440 */
@@ -574,14 +564,6 @@
 	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
 };
 
-static struct s3c_audio_pdata s3c_iis_platdata = {
-#ifdef CONFIG_S3C24XX_DMAC
-	.dma_filter = s3c24xx_dma_filter,
-#endif
-	.dma_playback = (void *)DMACH_I2S_OUT,
-	.dma_capture = (void *)DMACH_I2S_IN,
-};
-
 struct platform_device s3c_device_iis = {
 	.name		= "s3c24xx-iis",
 	.id		= -1,
@@ -590,7 +572,6 @@
 	.dev		= {
 		.dma_mask		= &samsung_device_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_iis_platdata,
 	}
 };
 #endif /* CONFIG_PLAT_S3C24XX */
diff --git a/arch/arm/plat-samsung/include/plat/wakeup-mask.h b/arch/arm/plat-samsung/include/plat/wakeup-mask.h
index 43e4acd..bbfa84b 100644
--- a/arch/arm/plat-samsung/include/plat/wakeup-mask.h
+++ b/arch/arm/plat-samsung/include/plat/wakeup-mask.h
@@ -38,7 +38,7 @@
  * required to be correct before we enter sleep.
  */
 extern void samsung_sync_wakemask(void __iomem *reg,
-				  struct samsung_wakeup_mask *masks,
+				  const struct samsung_wakeup_mask *masks,
 				  int nr_masks);
 
 #endif /* __PLAT_WAKEUP_MASK_H */
diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c
index 20c3d91..b9de6b5 100644
--- a/arch/arm/plat-samsung/wakeup-mask.c
+++ b/arch/arm/plat-samsung/wakeup-mask.c
@@ -20,7 +20,7 @@
 #include <plat/pm.h>
 
 void samsung_sync_wakemask(void __iomem *reg,
-			   struct samsung_wakeup_mask *mask, int nr_mask)
+			   const struct samsung_wakeup_mask *mask, int nr_mask)
 {
 	struct irq_data *data;
 	u32 val;
diff --git a/drivers/soc/dove/pmu.c b/drivers/soc/dove/pmu.c
index 039374e..95d77ec 100644
--- a/drivers/soc/dove/pmu.c
+++ b/drivers/soc/dove/pmu.c
@@ -87,7 +87,7 @@
 	return 0;
 }
 
-static struct reset_control_ops pmu_reset_ops = {
+static const struct reset_control_ops pmu_reset_ops = {
 	.reset = pmu_reset_reset,
 	.assert = pmu_reset_assert,
 	.deassert = pmu_reset_deassert,