Merge tag 'arc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

 - fix recent DSP code regression on ARC700 platforms

 - fix thinkos in ICCM/DCCM size checks

 - USB regression fix

 - other small fixes here and there

* tag 'arc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: show_regs: avoid extra line of output
  ARC: guard dsp early init against non ARCv2
  ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT
  ARC: entry: comment
  arc: remove #ifndef CONFIG_AS_CFI_SIGNAL_FRAME
  arc: ptrace: hard-code "arc" instead of UTS_MACHINE
  ARC: [plat-hsdk]: fix USB regression
  ARC: Fix ICCM & DCCM runtime size checks
diff --git a/.clang-format b/.clang-format
index 6ec5558..e92e6dd 100644
--- a/.clang-format
+++ b/.clang-format
@@ -142,10 +142,13 @@
   - 'for_each_card_auxs'
   - 'for_each_card_auxs_safe'
   - 'for_each_card_components'
+  - 'for_each_card_dapms'
   - 'for_each_card_pre_auxs'
   - 'for_each_card_prelinks'
   - 'for_each_card_rtds'
   - 'for_each_card_rtds_safe'
+  - 'for_each_card_widgets'
+  - 'for_each_card_widgets_safe'
   - 'for_each_cgroup_storage_type'
   - 'for_each_child_of_node'
   - 'for_each_clear_bit'
@@ -160,6 +163,7 @@
   - 'for_each_cpu_and'
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
+  - 'for_each_dapm_widgets'
   - 'for_each_dev_addr'
   - 'for_each_dev_scope'
   - 'for_each_displayid_db'
@@ -170,7 +174,6 @@
   - 'for_each_dpcm_fe'
   - 'for_each_drhd_unit'
   - 'for_each_dss_dev'
-  - 'for_each_efi_handle'
   - 'for_each_efi_memory_desc'
   - 'for_each_efi_memory_desc_in_map'
   - 'for_each_element'
@@ -191,6 +194,7 @@
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
   - 'for_each_link_codecs'
+  - 'for_each_link_cpus'
   - 'for_each_link_platforms'
   - 'for_each_lru'
   - 'for_each_matching_node'
@@ -250,6 +254,7 @@
   - 'for_each_pci_bridge'
   - 'for_each_pci_dev'
   - 'for_each_pci_msi_entry'
+  - 'for_each_pcm_streams'
   - 'for_each_populated_zone'
   - 'for_each_possible_cpu'
   - 'for_each_present_cpu'
@@ -260,9 +265,12 @@
   - 'for_each_property_of_node'
   - 'for_each_registered_fb'
   - 'for_each_reserved_mem_region'
-  - 'for_each_rtd_codec_dai'
-  - 'for_each_rtd_codec_dai_rollback'
+  - 'for_each_rtd_codec_dais'
+  - 'for_each_rtd_codec_dais_rollback'
   - 'for_each_rtd_components'
+  - 'for_each_rtd_cpu_dais'
+  - 'for_each_rtd_cpu_dais_rollback'
+  - 'for_each_rtd_dais'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
   - 'for_each_set_clump8'
@@ -334,6 +342,7 @@
   - 'klp_for_each_object'
   - 'klp_for_each_object_safe'
   - 'klp_for_each_object_static'
+  - 'kunit_suite_for_each_test_case'
   - 'kvm_for_each_memslot'
   - 'kvm_for_each_vcpu'
   - 'list_for_each'
@@ -387,6 +396,7 @@
   - 'of_property_for_each_string'
   - 'of_property_for_each_u32'
   - 'pci_bus_for_each_resource'
+  - 'pcm_for_each_format'
   - 'ping_portaddr_for_each_entry'
   - 'plist_for_each'
   - 'plist_for_each_continue'
@@ -482,7 +492,7 @@
 MacroBlockBegin: ''
 MacroBlockEnd: ''
 MaxEmptyLinesToKeep: 1
-NamespaceIndentation: Inner
+NamespaceIndentation: None
 #ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
 ObjCBlockIndentWidth: 8
 ObjCSpaceAfterProperty: true
diff --git a/.mailmap b/.mailmap
index db3754a..4f906b4 100644
--- a/.mailmap
+++ b/.mailmap
@@ -288,6 +288,8 @@
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Will Deacon <will@kernel.org> <will.deacon@arm.com>
+Wolfram Sang <wsa@kernel.org> <wsa@the-dreams.de>
+Wolfram Sang <wsa@kernel.org> <w.sang@pengutronix.de>
 Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst
index c00f9f1..8439d2ae 100644
--- a/Documentation/admin-guide/device-mapper/dm-integrity.rst
+++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst
@@ -182,12 +182,15 @@
 	space-efficient. If this option is not present, large padding is
 	used - that is for compatibility with older kernels.
 
+allow_discards
+	Allow block discard requests (a.k.a. TRIM) for the integrity device.
+	Discards are only allowed to devices using internal hash.
 
-The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can
-be changed when reloading the target (load an inactive table and swap the
-tables with suspend and resume). The other arguments should not be changed
-when reloading the target because the layout of disk data depend on them
-and the reloaded target would be non-functional.
+The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and
+allow_discards can be changed when reloading the target (load an inactive
+table and swap the tables with suspend and resume). The other arguments
+should not be changed when reloading the target because the layout of disk
+data depend on them and the reloaded target would be non-functional.
 
 
 The layout of the formatted block device:
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index f2a93c8..7bc83f3 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5187,8 +5187,7 @@
 
 	usbcore.old_scheme_first=
 			[USB] Start with the old device initialization
-			scheme,  applies only to low and full-speed devices
-			 (default 0 = off).
+			scheme (default 0 = off).
 
 	usbcore.usbfs_memory_mb=
 			[USB] Memory limit (in MB) for buffers allocated by
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index 39c95c0..0d427fd 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -390,9 +390,17 @@
 modprobe
 ========
 
-This gives the full path of the modprobe command which the kernel will
-use to load modules. This can be used to debug module loading
-requests::
+The full path to the usermode helper for autoloading kernel modules,
+by default "/sbin/modprobe".  This binary is executed when the kernel
+requests a module.  For example, if userspace passes an unknown
+filesystem type to mount(), then the kernel will automatically request
+the corresponding filesystem module by executing this usermode helper.
+This usermode helper should insert the needed module into the kernel.
+
+This sysctl only affects module autoloading.  It has no effect on the
+ability to explicitly insert modules.
+
+This sysctl can be used to debug module loading requests::
 
     echo '#! /bin/sh' > /tmp/modprobe
     echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe
@@ -400,10 +408,15 @@
     chmod a+x /tmp/modprobe
     echo /tmp/modprobe > /proc/sys/kernel/modprobe
 
-This only applies when the *kernel* is requesting that the module be
-loaded; it won't have any effect if the module is being loaded
-explicitly using ``modprobe`` from userspace.
+Alternatively, if this sysctl is set to the empty string, then module
+autoloading is completely disabled.  The kernel will not try to
+execute a usermode helper at all, nor will it call the
+kernel_module_request LSM hook.
 
+If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
+then the configured static usermode helper overrides this sysctl,
+except that the empty string is still accepted to completely disable
+module autoloading as described above.
 
 modules_disabled
 ================
@@ -446,28 +459,6 @@
      successful IPC object allocation. If an IPC object allocation syscall
      fails, it is undefined if the value remains unmodified or is reset to -1.
 
-modprobe:
-=========
-
-The path to the usermode helper for autoloading kernel modules, by
-default "/sbin/modprobe".  This binary is executed when the kernel
-requests a module.  For example, if userspace passes an unknown
-filesystem type to mount(), then the kernel will automatically request
-the corresponding filesystem module by executing this usermode helper.
-This usermode helper should insert the needed module into the kernel.
-
-This sysctl only affects module autoloading.  It has no effect on the
-ability to explicitly insert modules.
-
-If this sysctl is set to the empty string, then module autoloading is
-completely disabled.  The kernel will not try to execute a usermode
-helper at all, nor will it call the kernel_module_request LSM hook.
-
-If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
-then the configured static usermode helper overrides this sysctl,
-except that the empty string is still accepted to completely disable
-module autoloading as described above.
-
 nmi_watchdog
 ============
 
diff --git a/Documentation/arm64/amu.rst b/Documentation/arm64/amu.rst
index 5057b11..036783e 100644
--- a/Documentation/arm64/amu.rst
+++ b/Documentation/arm64/amu.rst
@@ -23,13 +23,14 @@
 
 Version 1 of the Activity Monitors architecture implements a counter group
 of four fixed and architecturally defined 64-bit event counters.
-  - CPU cycle counter: increments at the frequency of the CPU.
-  - Constant counter: increments at the fixed frequency of the system
-    clock.
-  - Instructions retired: increments with every architecturally executed
-    instruction.
-  - Memory stall cycles: counts instruction dispatch stall cycles caused by
-    misses in the last level cache within the clock domain.
+
+- CPU cycle counter: increments at the frequency of the CPU.
+- Constant counter: increments at the fixed frequency of the system
+  clock.
+- Instructions retired: increments with every architecturally executed
+  instruction.
+- Memory stall cycles: counts instruction dispatch stall cycles caused by
+  misses in the last level cache within the clock domain.
 
 When in WFI or WFE these counters do not increment.
 
@@ -57,11 +58,12 @@
 
 Firmware (code running at higher exception levels, e.g. arm-tf) support is
 needed to:
- - Enable access for lower exception levels (EL2 and EL1) to the AMU
-   registers.
- - Enable the counters. If not enabled these will read as 0.
- - Save/restore the counters before/after the CPU is being put/brought up
-   from the 'off' power state.
+
+- Enable access for lower exception levels (EL2 and EL1) to the AMU
+  registers.
+- Enable the counters. If not enabled these will read as 0.
+- Save/restore the counters before/after the CPU is being put/brought up
+  from the 'off' power state.
 
 When using kernels that have this feature enabled but boot with broken
 firmware the user may experience panics or lockups when accessing the
@@ -78,10 +80,11 @@
 
 The fixed counters of AMUv1 are accessible though the following system
 register definitions:
- - SYS_AMEVCNTR0_CORE_EL0
- - SYS_AMEVCNTR0_CONST_EL0
- - SYS_AMEVCNTR0_INST_RET_EL0
- - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+- SYS_AMEVCNTR0_CORE_EL0
+- SYS_AMEVCNTR0_CONST_EL0
+- SYS_AMEVCNTR0_INST_RET_EL0
+- SYS_AMEVCNTR0_MEM_STALL_EL0
 
 Auxiliary platform specific counters can be accessed using
 SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
@@ -93,9 +96,10 @@
 ----------------
 
 Currently, access from userspace to the AMU registers is disabled due to:
- - Security reasons: they might expose information about code executed in
-   secure mode.
- - Purpose: AMU counters are intended for system management use.
+
+- Security reasons: they might expose information about code executed in
+  secure mode.
+- Purpose: AMU counters are intended for system management use.
 
 Also, the presence of the feature is not visible to userspace.
 
@@ -105,8 +109,9 @@
 
 Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
 guest side is disabled due to:
- - Security reasons: they might expose information about code executed
-   by other guests or the host.
+
+- Security reasons: they might expose information about code executed
+  by other guests or the host.
 
 Any attempt to access the AMU registers will result in an UNDEFINED
 exception being injected into the guest.
diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst
index 8ebe46b1..5dfcc45 100644
--- a/Documentation/core-api/printk-formats.rst
+++ b/Documentation/core-api/printk-formats.rst
@@ -112,6 +112,20 @@
 consideration the effect of compiler optimisations which may occur
 when tail-calls are used and marked with the noreturn GCC attribute.
 
+Probed Pointers from BPF / tracing
+----------------------------------
+
+::
+
+	%pks	kernel string
+	%pus	user string
+
+The ``k`` and ``u`` specifiers are used for printing prior probed memory from
+either kernel memory (k) or user memory (u). The subsequent ``s`` specifier
+results in printing a string. For direct use in regular vsnprintf() the (k)
+and (u) annotation is ignored, however, when used out of BPF's bpf_trace_printk(),
+for example, it reads the memory it is pointing to without faulting.
+
 Kernel Pointers
 ---------------
 
diff --git a/Documentation/core-api/timekeeping.rst b/Documentation/core-api/timekeeping.rst
index c0ffa30..729e248 100644
--- a/Documentation/core-api/timekeeping.rst
+++ b/Documentation/core-api/timekeeping.rst
@@ -154,9 +154,9 @@
 
 	Use ktime_get() or ktime_get_ts64() instead.
 
-.. c:function:: struct timeval do_gettimeofday( void )
-		struct timespec getnstimeofday( void )
-		struct timespec64 getnstimeofday64( void )
+.. c:function:: void do_gettimeofday( struct timeval * )
+		void getnstimeofday( struct timespec * )
+		void getnstimeofday64( struct timespec64 * )
 		void ktime_get_real_ts( struct timespec * )
 
 	ktime_get_real_ts64() is a direct replacement, but consider using
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 1df680d..7782d99 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -2,6 +2,7 @@
 DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
+DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
 
 quiet_cmd_chk_binding = CHKDT   $(patsubst $(srctree)/%,%,$<)
       cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
@@ -13,16 +14,18 @@
 # Use full schemas when checking %.example.dts
 DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml
 
-quiet_cmd_mk_schema = SCHEMA  $@
-      cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
-
-DT_DOCS = $(addprefix $(src)/, \
-	$(shell \
-	cd $(srctree)/$(src) && \
-	find * \( -name '*.yaml' ! \
+find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
 		-name 'processed-schema*' ! \
-		-name '*.example.dt.yaml' \) \
-	))
+		-name '*.example.dt.yaml' \)
+
+quiet_cmd_mk_schema = SCHEMA  $@
+      cmd_mk_schema = rm -f $@ ; \
+                      $(if $(DT_MK_SCHEMA_FLAGS), \
+                           echo $(real-prereqs), \
+                           $(find_cmd)) | \
+                      xargs $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) >> $@
+
+DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
 
 DT_SCHEMA_FILES ?= $(DT_DOCS)
 
@@ -37,7 +40,7 @@
 $(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE
 	$(call if_changed,mk_schema)
 
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
 $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE
 	$(call if_changed,mk_schema)
 
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
index aa0738b4..e713a6f 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -42,6 +42,10 @@
     description:
       See section 2.3.9 of the DeviceTree Specification.
 
+  '#address-cells': true
+
+  '#size-cells': true
+
 required:
   - "#interconnect-cells"
   - compatible
@@ -59,6 +63,8 @@
         compatible = "allwinner,sun5i-a13-mbus";
         reg = <0x01c01000 0x1000>;
         clocks = <&ccu CLK_MBUS>;
+        #address-cells = <1>;
+        #size-cells = <1>;
         dma-ranges = <0x00000000 0x40000000 0x20000000>;
         #interconnect-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
index de9a465..444aeea 100644
--- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -91,7 +91,7 @@
 
 examples:
   - |
-    vco1: clock@00 {
+    vco1: clock {
       compatible = "arm,impd1-vco1";
       #clock-cells = <0>;
       lock-offset = <0x08>;
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt
index a6b2b2b..d3c2a49 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt
@@ -1,5 +1,5 @@
-Analog Device ADV7123 Video DAC
--------------------------------
+Analog Devices ADV7123 Video DAC
+--------------------------------
 
 The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
 parallel video input.
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index e8ddec5..659523f 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -1,5 +1,5 @@
-Analog Device ADV7511(W)/13/33/35 HDMI Encoders
------------------------------------------
+Analog Devices ADV7511(W)/13/33/35 HDMI Encoders
+------------------------------------------------
 
 The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
 transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
index fd931b2..b900973 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -37,7 +37,6 @@
     dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "leadtek,ltk500hd1829";
diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml
index d008330..946dd35 100644
--- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml
@@ -96,12 +96,20 @@
       If set, reverse the bit order described in the data mappings below on all
       data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
 
+  port: true
+  ports: true
+
 required:
   - compatible
   - data-mapping
   - width-mm
   - height-mm
   - panel-timing
-  - port
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
 
 ...
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index d9fdb58..6913923 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -37,7 +37,6 @@
     dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "xinpeng,xpp055c272";
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
index b38ee73..cd17684 100644
--- a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
@@ -1,4 +1,4 @@
-Analog Device AXI-DMAC DMA controller
+Analog Devices AXI-DMAC DMA controller
 
 Required properties:
  - compatible: Must be "adi,axi-dmac-1.00.a".
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
index e77b08e..ee17547 100644
--- a/Documentation/devicetree/bindings/dma/fsl-edma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt
@@ -10,7 +10,8 @@
 - compatible :
 	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
 	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
-	- "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC
+	- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
+	  LS1028A SoC.
 - reg : Specifies base physical address(s) and size of the eDMA registers.
 	The 1st region is eDMA control register's address and size.
 	The 2nd and the 3rd regions are programmable channel multiplexing
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
index 86cfb59..371f187 100644
--- a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
@@ -22,9 +22,7 @@
     const: socionext,uniphier-xdmac
 
   reg:
-    items:
-      - description: XDMAC base register region (offset and length)
-      - description: XDMAC extension register region (offset and length)
+    maxItems: 1
 
   interrupts:
     maxItems: 1
@@ -49,12 +47,13 @@
   - reg
   - interrupts
   - "#dma-cells"
+  - dma-channels
 
 examples:
   - |
     xdmac: dma-controller@5fc10000 {
         compatible = "socionext,uniphier-xdmac";
-        reg = <0x5fc10000 0x1000>, <0x5fc20000 0x800>;
+        reg = <0x5fc10000 0x5300>;
         interrupts = <0 188 4>;
         #dma-cells = <2>;
         dma-channels = <16>;
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
index 57a240d..7db7876 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
+$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AXI FAN Control Device Tree Bindings
@@ -47,7 +47,7 @@
 
 examples:
   - |
-    fpga_axi: fpga-axi@0 {
+    fpga_axi: fpga-axi {
             #address-cells = <0x2>;
             #size-cells = <0x1>;
 
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 7698503..46c4415 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/adt7475.yaml#
+$id: http://devicetree.org/schemas/hwmon/adt7475.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ADT7475 hwmon sensor
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index 933ba37..dd8eb15 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#"
+$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: STMicroelectronics STM32 ADC bindings
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
index f0bbd7e..502e1e5 100644
--- a/Documentation/devicetree/bindings/iio/dac/ad5755.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
@@ -1,4 +1,4 @@
-* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
+* Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver
 
 Required properties:
  - compatible: Has to contain one of the following:
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index d9c25cf..58d81ca 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -2,7 +2,7 @@
 # Copyright 2020 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml#
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AD5770R DAC device driver
@@ -49,93 +49,86 @@
       asserted during driver probe.
     maxItems: 1
 
-  channel0:
+  channel@0:
     description: Represents an external channel which are
       connected to the DAC. Channel 0 can act both as a current
       source and sink.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          const: 0
+        const: 0
 
       adi,range-microamp:
           description: Output range of the channel.
           oneOf:
-            - $ref: /schemas/types.yaml#/definitions/int32-array
             - items:
-                - enum: [0 300000]
-                - enum: [-60000 0]
-                - enum: [-60000 300000]
+                - const: 0
+                - const: 300000
+            - items:
+                - const: -60000
+                - const: 0
+            - items:
+                - const: -60000
+                - const: 300000
 
-  channel1:
+  channel@1:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          const: 1
+        const: 1
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
-            - items:
-                - enum: [0 140000]
-                - enum: [0 250000]
+          items:
+            - const: 0
+            - enum: [ 140000, 250000 ]
 
-  channel2:
+  channel@2:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          const: 2
+        const: 2
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
-            - items:
-                - enum: [0 140000]
-                - enum: [0 250000]
+          items:
+            - const: 0
+            - enum: [ 55000, 150000 ]
 
 patternProperties:
   "^channel@([3-5])$":
     type: object
     description: Represents the external channels which are connected to the DAC.
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          minimum: 3
-          maximum: 5
+        minimum: 3
+        maximum: 5
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
-            - items:
-                - enum: [0 45000]
-                - enum: [0 100000]
+          items:
+            - const: 0
+            - enum: [ 45000, 100000 ]
 
 required:
 - reg
-- diff-channels
-- channel0
-- channel1
-- channel2
-- channel3
-- channel4
-- channel5
+- channel@0
+- channel@1
+- channel@2
+- channel@3
+- channel@4
+- channel@5
 
 examples:
   - |
@@ -144,40 +137,42 @@
                 #size-cells = <0>;
 
                 ad5770r@0 {
-                        compatible = "ad5770r";
+                        compatible = "adi,ad5770r";
                         reg = <0>;
                         spi-max-frequency = <1000000>;
                         vref-supply = <&vref>;
                         adi,external-resistor;
                         reset-gpios = <&gpio 22 0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
 
                         channel@0 {
-                                num = <0>;
-                                adi,range-microamp = <(-60000) 300000>;
+                                reg = <0>;
+                                adi,range-microamp = <0 300000>;
                         };
 
                         channel@1 {
-                                num = <1>;
+                                reg = <1>;
                                 adi,range-microamp = <0 140000>;
                         };
 
                         channel@2 {
-                                num = <2>;
+                                reg = <2>;
                                 adi,range-microamp = <0 55000>;
                         };
 
                         channel@3 {
-                                num = <3>;
+                                reg = <3>;
                                 adi,range-microamp = <0 45000>;
                         };
 
                         channel@4 {
-                                num = <4>;
+                                reg = <4>;
                                 adi,range-microamp = <0 45000>;
                         };
 
                         channel@5 {
-                                num = <5>;
+                                reg = <5>;
                                 adi,range-microamp = <0 45000>;
                         };
                 };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 8d58709..383d64a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -109,7 +109,7 @@
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c@00000000 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       edt-ft5x06@38 {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 9c6b91f..26f1fcf 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -56,9 +56,8 @@
       cell with zero.
     allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minItems: 4
-          maxItems: 4
+      - minItems: 4
+        maxItems: 4
 
 
 required:
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
index 12516bd..611bda3 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -97,30 +97,35 @@
     #include <dt-bindings/clock/tegra186-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    memory-controller@2c00000 {
-        compatible = "nvidia,tegra186-mc";
-        reg = <0x0 0x02c00000 0x0 0xb0000>;
-        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-
+    bus {
         #address-cells = <2>;
         #size-cells = <2>;
 
-        ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>;
+        memory-controller@2c00000 {
+            compatible = "nvidia,tegra186-mc";
+            reg = <0x0 0x02c00000 0x0 0xb0000>;
+            interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 
-        /*
-         * Memory clients have access to all 40 bits that the memory
-         * controller can address.
-         */
-        dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+            #address-cells = <2>;
+            #size-cells = <2>;
 
-        external-memory-controller@2c60000 {
-            compatible = "nvidia,tegra186-emc";
-            reg = <0x0 0x02c60000 0x0 0x50000>;
-            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&bpmp TEGRA186_CLK_EMC>;
-            clock-names = "emc";
+            ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
 
-            nvidia,bpmp = <&bpmp>;
+            /*
+             * Memory clients have access to all 40 bits that the memory
+             * controller can address.
+             */
+            dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+            external-memory-controller@2c60000 {
+                compatible = "nvidia,tegra186-emc";
+                reg = <0x0 0x02c60000 0x0 0x50000>;
+                interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&bpmp TEGRA186_CLK_EMC>;
+                clock-names = "emc";
+
+                nvidia,bpmp = <&bpmp>;
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
index aa922c5..65018a0 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
@@ -123,7 +123,9 @@
     #include <dt-bindings/leds/common.h>
 
     i2c {
-      pmic: pmic@4b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
             compatible = "rohm,bd71837";
             reg = <0x4b>;
             interrupt-parent = <&gpio1>;
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
index 402e40d..77bcca2 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
@@ -128,7 +128,9 @@
     #include <dt-bindings/leds/common.h>
 
     i2c {
-      pmic: pmic@4b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
             compatible = "rohm,bd71847";
             reg = <0x4b>;
             interrupt-parent = <&gpio1>;
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
index d9ad926..be7faa6 100644
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -259,8 +259,6 @@
 
     additionalProperties: false
 
-  additionalProperties: false
-
 additionalProperties: false
 
 required:
@@ -274,7 +272,7 @@
   - |
     #include <dt-bindings/mfd/st,stpmic1.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c@0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       pmic@33 {
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 8927941..5aa141c 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -45,6 +45,9 @@
           bits of a vendor specific ID.
       - items:
           - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+          - const: ethernet-phy-ieee802.3-c22
+      - items:
+          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
           - const: ethernet-phy-ieee802.3-c45
 
   reg:
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 5b88fae0..ff8b0f2 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -22,6 +22,8 @@
 - fsl,err006687-workaround-present: If present indicates that the system has
   the hardware workaround for ERR006687 applied and does not need a software
   workaround.
+- gpr: phandle of SoC general purpose register mode. Required for wake on LAN
+  on some SoCs
  -interrupt-names:  names of the interrupts listed in interrupts property in
   the same order. The defaults if not specified are
   __Number of interrupts__   __Default__
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
index b9f9008..67df3fe 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
@@ -48,6 +48,7 @@
 
         switch@10 {
             compatible = "qca,qca8337";
+            reg = <0x10>;
             /* ... */
         };
     };
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
index beca646..d220279 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
@@ -29,7 +29,7 @@
 
 Optional properties for compatible string qcom,wcn399x-bt:
 
- - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+ - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
  - firmware-name: specify the name of nvm firmware to load
  - clocks: clock provided to the controller
 
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 144ae29..f8bd28f 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -97,7 +97,7 @@
         - $ref: /schemas/types.yaml#/definitions/uint32
         - minimum: 0
           maximum: 63
-          default: 0
+          default: 32
 
     qcom,charge-ctrl-value:
      description:
@@ -130,7 +130,7 @@
         - $ref: /schemas/types.yaml#/definitions/uint32
         - minimum: 0
           maximum: 3
-          default: 2
+          default: 0
 
     qcom,preemphasis-width:
       description:
@@ -152,7 +152,7 @@
         - $ref: /schemas/types.yaml#/definitions/uint32
         - minimum: 0
           maximum: 3
-          default: 0
+          default: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index fd1982c..3f913d6 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -146,7 +146,7 @@
       bindings specified in
       Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
       Torrent SERDES should follow the bindings specified in
-      Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+      Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
index 24c217b..41ece1d 100644
--- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
@@ -31,10 +31,17 @@
 
 examples:
   - |
-    cros-ec@0 {
-        compatible = "google,cros-ec-spi";
-        cros_ec_pwm: ec-pwm {
-            compatible = "google,cros-ec-pwm";
-            #pwm-cells = <1>;
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+
+            cros_ec_pwm: ec-pwm {
+                compatible = "google,cros-ec-pwm";
+                #pwm-cells = <1>;
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index f0acce2..3b019fa 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -37,7 +37,6 @@
         type: object
 
     additionalProperties: false
-  additionalProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index a682af0..ae6e7ab 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -75,7 +75,8 @@
             description: |
               disables over voltage protection of this buck
 
-      additionalProperties: false
+        unevaluatedProperties: false
+
     additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
index 71ce032..1e52daf 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -35,6 +35,8 @@
         description:
           should be "ldo1", ..., "ldo7"
 
+    unevaluatedProperties: false
+
   "^BUCK[1-7]$":
     type: object
     allOf:
@@ -103,5 +105,7 @@
 
     required:
       - regulator-name
-  additionalProperties: false
+
+    unevaluatedProperties: false
+
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
index a323b16..543d4b5 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
@@ -41,6 +41,8 @@
         description:
           should be "ldo1", ..., "ldo7"
 
+    unevaluatedProperties: false
+
   "^BUCK[1-8]$":
     type: object
     allOf:
@@ -99,5 +101,7 @@
 
     required:
       - regulator-name
-  additionalProperties: false
+
+    unevaluatedProperties: false
+
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
index 526fd00..d797cc2 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
@@ -40,6 +40,8 @@
         description:
           should be "ldo1", ..., "ldo6"
 
+    unevaluatedProperties: false
+
   "^BUCK[1-6]$":
     type: object
     allOf:
@@ -93,5 +95,7 @@
 
     required:
       - regulator-name
-  additionalProperties: false
+
+    unevaluatedProperties: false
+
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
index 89ab67f..c147900 100644
--- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
@@ -39,7 +39,7 @@
 
 examples:
   - |
-    rng {
+    rng@7e104000 {
         compatible = "brcm,bcm2835-rng";
         reg = <0x7e104000 0x10>;
         interrupts = <2 29>;
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
index 7cd0e27..a3ba218 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -56,6 +56,9 @@
       - const: tx
       - const: rx
 
+  power-domains:
+    maxItems: 1
+
   rockchip,capture-channels:
     allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt
deleted file mode 100644
index ec20c12..0000000
--- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Rockchip SPDIF transceiver
-
-The S/PDIF audio block is a stereo transceiver that allows the
-processor to receive and transmit digital audio via an coaxial cable or
-a fibre cable.
-
-Required properties:
-
-- compatible: should be one of the following:
-   - "rockchip,rk3066-spdif"
-   - "rockchip,rk3188-spdif"
-   - "rockchip,rk3228-spdif"
-   - "rockchip,rk3288-spdif"
-   - "rockchip,rk3328-spdif"
-   - "rockchip,rk3366-spdif"
-   - "rockchip,rk3368-spdif"
-   - "rockchip,rk3399-spdif"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: should contain the SPDIF interrupt.
-- dmas: DMA specifiers for tx dma. See the DMA client binding,
-  Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should be "tx"
-- clocks: a list of phandle + clock-specifier pairs, one for each entry
-  in clock-names.
-- clock-names: should contain following:
-   - "hclk": clock for SPDIF controller
-   - "mclk" : clock for SPDIF bus
-
-Required properties on RK3288:
-  - rockchip,grf: the phandle of the syscon node for the general register
-                   file (GRF)
-
-Example for the rk3188 SPDIF controller:
-
-spdif: spdif@1011e000 {
-	compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
-	reg = <0x1011e000 0x2000>;
-	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-	dmas = <&dmac1_s 8>;
-	dma-names = "tx";
-	clock-names = "hclk", "mclk";
-	clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
-	#sound-dai-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
new file mode 100644
index 0000000..c467152
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPDIF transceiver
+
+description:
+  The S/PDIF audio block is a stereo transceiver that allows the
+  processor to receive and transmit digital audio via a coaxial or
+  fibre cable.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-spdif
+      - const: rockchip,rk3228-spdif
+      - const: rockchip,rk3328-spdif
+      - const: rockchip,rk3366-spdif
+      - const: rockchip,rk3368-spdif
+      - const: rockchip,rk3399-spdif
+      - items:
+          - enum:
+            - rockchip,rk3188-spdif
+            - rockchip,rk3288-spdif
+          - const: rockchip,rk3066-spdif
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for SPDIF bus
+      - description: clock for SPDIF controller
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: hclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property on RK3288.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: rockchip,rk3288-spdif
+
+then:
+  required:
+    - rockchip,grf
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spdif: spdif@1011e000 {
+      compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+      reg = <0x1011e000 0x2000>;
+      interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+      clock-names = "mclk", "hclk";
+      dmas = <&dmac1_s 8>;
+      dma-names = "tx";
+      #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index 0cf470e..5c16cf5 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -61,7 +61,7 @@
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    soc: soc@0 {
+    soc: soc {
         #address-cells = <2>;
         #size-cells = <2>;
 
diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
index 1d68778..c2d2ee4 100644
--- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
+++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
@@ -56,7 +56,7 @@
 examples:
   - |
     #include <dt-bindings/clock/jz4740-cgu.h>
-    usb_phy: usb-phy@0 {
+    usb_phy: usb-phy {
       compatible = "usb-nop-xceiv";
       #phy-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index cb695aa..fbdd017 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -52,8 +52,8 @@
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt   - USB3 QMP PHY
-Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
+Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt    - USB3 QMP PHY
+Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
 
 Example device nodes:
 
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
index 92d8631..031452a 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
@@ -18,6 +18,7 @@
           - renesas,r8a774c0-usb3-peri # RZ/G2E
           - renesas,r8a7795-usb3-peri  # R-Car H3
           - renesas,r8a7796-usb3-peri  # R-Car M3-W
+          - renesas,r8a77961-usb3-peri # R-Car M3-W+
           - renesas,r8a77965-usb3-peri # R-Car M3-N
           - renesas,r8a77990-usb3-peri # R-Car E3
       - const: renesas,rcar-gen3-usb3-peri
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index 469affa..a7ae955 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -40,6 +40,7 @@
               - renesas,usbhs-r8a774c0 # RZ/G2E
               - renesas,usbhs-r8a7795  # R-Car H3
               - renesas,usbhs-r8a7796  # R-Car M3-W
+              - renesas,usbhs-r8a77961 # R-Car M3-W+
               - renesas,usbhs-r8a77965 # R-Car M3-N
               - renesas,usbhs-r8a77990 # R-Car E3
               - renesas,usbhs-r8a77995 # R-Car D3
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index c8c4b00..9452049 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -16,7 +16,7 @@
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY
+Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY
 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt     - Type-C PHY
 
 Example device nodes:
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 3f37895..dc025f1 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -16,7 +16,8 @@
     - "renesas,xhci-r8a7791" for r8a7791 SoC
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
-    - "renesas,xhci-r8a7796" for r8a7796 SoC
+    - "renesas,xhci-r8a7796" for r8a77960 SoC
+    - "renesas,xhci-r8a77961" for r8a77961 SoC
     - "renesas,xhci-r8a77965" for r8a77965 SoC
     - "renesas,xhci-r8a77990" for r8a77990 SoC
     - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
diff --git a/Documentation/filesystems/debugfs.rst b/Documentation/filesystems/debugfs.rst
index db9ea08..6c032db 100644
--- a/Documentation/filesystems/debugfs.rst
+++ b/Documentation/filesystems/debugfs.rst
@@ -79,8 +79,8 @@
 			   struct dentry *parent, u8 *value);
     void debugfs_create_u16(const char *name, umode_t mode,
 			    struct dentry *parent, u16 *value);
-    struct dentry *debugfs_create_u32(const char *name, umode_t mode,
-				      struct dentry *parent, u32 *value);
+    void debugfs_create_u32(const char *name, umode_t mode,
+			    struct dentry *parent, u32 *value);
     void debugfs_create_u64(const char *name, umode_t mode,
 			    struct dentry *parent, u64 *value);
 
diff --git a/Documentation/hwmon/isl68137.rst b/Documentation/hwmon/isl68137.rst
index cc4b614..0e71b22 100644
--- a/Documentation/hwmon/isl68137.rst
+++ b/Documentation/hwmon/isl68137.rst
@@ -16,7 +16,7 @@
 
   * Renesas ISL68220
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68220'
 
     Addresses scanned: -
 
@@ -26,7 +26,7 @@
 
   * Renesas ISL68221
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68221'
 
     Addresses scanned: -
 
@@ -36,7 +36,7 @@
 
   * Renesas ISL68222
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68222'
 
     Addresses scanned: -
 
@@ -46,7 +46,7 @@
 
   * Renesas ISL68223
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68223'
 
     Addresses scanned: -
 
@@ -56,7 +56,7 @@
 
   * Renesas ISL68224
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68224'
 
     Addresses scanned: -
 
@@ -66,7 +66,7 @@
 
   * Renesas ISL68225
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68225'
 
     Addresses scanned: -
 
@@ -76,7 +76,7 @@
 
   * Renesas ISL68226
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68226'
 
     Addresses scanned: -
 
@@ -86,7 +86,7 @@
 
   * Renesas ISL68227
 
-    Prefix: 'raa_dmpvr2_1rail'
+    Prefix: 'isl68227'
 
     Addresses scanned: -
 
@@ -96,7 +96,7 @@
 
   * Renesas ISL68229
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68229'
 
     Addresses scanned: -
 
@@ -106,7 +106,7 @@
 
   * Renesas ISL68233
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68233'
 
     Addresses scanned: -
 
@@ -116,7 +116,7 @@
 
   * Renesas ISL68239
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68239'
 
     Addresses scanned: -
 
@@ -126,7 +126,7 @@
 
   * Renesas ISL69222
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69222'
 
     Addresses scanned: -
 
@@ -136,7 +136,7 @@
 
   * Renesas ISL69223
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69223'
 
     Addresses scanned: -
 
@@ -146,7 +146,7 @@
 
   * Renesas ISL69224
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69224'
 
     Addresses scanned: -
 
@@ -156,7 +156,7 @@
 
   * Renesas ISL69225
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69225'
 
     Addresses scanned: -
 
@@ -166,7 +166,7 @@
 
   * Renesas ISL69227
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69227'
 
     Addresses scanned: -
 
@@ -176,7 +176,7 @@
 
   * Renesas ISL69228
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69228'
 
     Addresses scanned: -
 
@@ -186,7 +186,7 @@
 
   * Renesas ISL69234
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69234'
 
     Addresses scanned: -
 
@@ -196,7 +196,7 @@
 
   * Renesas ISL69236
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69236'
 
     Addresses scanned: -
 
@@ -206,7 +206,7 @@
 
   * Renesas ISL69239
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69239'
 
     Addresses scanned: -
 
@@ -216,7 +216,7 @@
 
   * Renesas ISL69242
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69242'
 
     Addresses scanned: -
 
@@ -226,7 +226,7 @@
 
   * Renesas ISL69243
 
-    Prefix: 'raa_dmpvr2_1rail'
+    Prefix: 'isl69243'
 
     Addresses scanned: -
 
@@ -236,7 +236,7 @@
 
   * Renesas ISL69247
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69247'
 
     Addresses scanned: -
 
@@ -246,7 +246,7 @@
 
   * Renesas ISL69248
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69248'
 
     Addresses scanned: -
 
@@ -256,7 +256,7 @@
 
   * Renesas ISL69254
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69254'
 
     Addresses scanned: -
 
@@ -266,7 +266,7 @@
 
   * Renesas ISL69255
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69255'
 
     Addresses scanned: -
 
@@ -276,7 +276,7 @@
 
   * Renesas ISL69256
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69256'
 
     Addresses scanned: -
 
@@ -286,7 +286,7 @@
 
   * Renesas ISL69259
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69259'
 
     Addresses scanned: -
 
@@ -296,7 +296,7 @@
 
   * Renesas ISL69260
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69260'
 
     Addresses scanned: -
 
@@ -306,7 +306,7 @@
 
   * Renesas ISL69268
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69268'
 
     Addresses scanned: -
 
@@ -316,7 +316,7 @@
 
   * Renesas ISL69269
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69269'
 
     Addresses scanned: -
 
@@ -326,7 +326,7 @@
 
   * Renesas ISL69298
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69298'
 
     Addresses scanned: -
 
@@ -336,7 +336,7 @@
 
   * Renesas RAA228000
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228000'
 
     Addresses scanned: -
 
@@ -346,7 +346,7 @@
 
   * Renesas RAA228004
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228004'
 
     Addresses scanned: -
 
@@ -356,7 +356,7 @@
 
   * Renesas RAA228006
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228006'
 
     Addresses scanned: -
 
@@ -366,7 +366,7 @@
 
   * Renesas RAA228228
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa228228'
 
     Addresses scanned: -
 
@@ -376,7 +376,7 @@
 
   * Renesas RAA229001
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa229001'
 
     Addresses scanned: -
 
@@ -386,7 +386,7 @@
 
   * Renesas RAA229004
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa229004'
 
     Addresses scanned: -
 
diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index 04d5c01..b80257a 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -1241,7 +1241,8 @@
 	will be displayed with "make KBUILD_VERBOSE=0".
 
 
---- 6.9 Preprocessing linker scripts
+6.9 Preprocessing linker scripts
+--------------------------------
 
 	When the vmlinux image is built, the linker script
 	arch/$(ARCH)/kernel/vmlinux.lds is used.
diff --git a/Documentation/networking/devlink/devlink-trap.rst b/Documentation/networking/devlink/devlink-trap.rst
index a09971c..fe089ac 100644
--- a/Documentation/networking/devlink/devlink-trap.rst
+++ b/Documentation/networking/devlink/devlink-trap.rst
@@ -257,6 +257,8 @@
   * :doc:`netdevsim`
   * :doc:`mlxsw`
 
+.. _Generic-Packet-Trap-Groups:
+
 Generic Packet Trap Groups
 ==========================
 
diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst
index 5b58fc4..4574352 100644
--- a/Documentation/networking/devlink/ice.rst
+++ b/Documentation/networking/devlink/ice.rst
@@ -61,8 +61,8 @@
       - running
       - ICE OS Default Package
       - The name of the DDP package that is active in the device. The DDP
-        package is loaded by the driver during initialization. Each varation
-        of DDP package shall have a unique name.
+        package is loaded by the driver during initialization. Each
+        variation of the DDP package has a unique name.
     * - ``fw.app``
       - running
       - 1.3.1.0
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index 50133d9..6538ede 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -22,6 +22,7 @@
    z8530book
    msg_zerocopy
    failover
+   net_dim
    net_failover
    phy
    sfp-phylink
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ee961d3..9375324 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -812,7 +812,7 @@
 tcp_challenge_ack_limit - INTEGER
 	Limits number of Challenge ACK sent per second, as recommended
 	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
-	Default: 100
+	Default: 1000
 
 tcp_rx_skb_cache - BOOLEAN
 	Controls a per TCP socket cache of one skb, that might help
@@ -983,6 +983,13 @@
 	reduces overall throughput, in such case you should disable it.
 	Default: 1
 
+ping_group_range - 2 INTEGERS
+	Restrict ICMP_PROTO datagram sockets to users in the group range.
+	The default is "1 0", meaning, that nobody (not even root) may
+	create ping sockets.  Setting it to "100 100" would grant permissions
+	to the single group. "0 4294967295" would enable it for the world, "100
+	4294967295" would enable it for the users, but not daemons.
+
 tcp_early_demux - BOOLEAN
 	Enable early demux for established TCP sockets.
 	Default: 1
diff --git a/Documentation/networking/net_dim.txt b/Documentation/networking/net_dim.rst
similarity index 78%
rename from Documentation/networking/net_dim.txt
rename to Documentation/networking/net_dim.rst
index 9bdb7d5..3bed9fd 100644
--- a/Documentation/networking/net_dim.txt
+++ b/Documentation/networking/net_dim.rst
@@ -1,28 +1,20 @@
+======================================================
 Net DIM - Generic Network Dynamic Interrupt Moderation
 ======================================================
 
-Author:
-	Tal Gilboa <talgi@mellanox.com>
+:Author: Tal Gilboa <talgi@mellanox.com>
 
+.. contents:: :depth: 2
 
-Contents
-=========
-
-- Assumptions
-- Introduction
-- The Net DIM Algorithm
-- Registering a Network Device to DIM
-- Example
-
-Part 0: Assumptions
-======================
+Assumptions
+===========
 
 This document assumes the reader has basic knowledge in network drivers
 and in general interrupt moderation.
 
 
-Part I: Introduction
-======================
+Introduction
+============
 
 Dynamic Interrupt Moderation (DIM) (in networking) refers to changing the
 interrupt moderation configuration of a channel in order to optimize packet
@@ -41,14 +33,15 @@
 increase bandwidth over reducing interrupt rate.
 
 
-Part II: The Net DIM Algorithm
-===============================
+Net DIM Algorithm
+=================
 
 Each iteration of the Net DIM algorithm follows these steps:
-1. Calculates new data sample.
-2. Compares it to previous sample.
-3. Makes a decision - suggests interrupt moderation configuration fields.
-4. Applies a schedule work function, which applies suggested configuration.
+
+#. Calculates new data sample.
+#. Compares it to previous sample.
+#. Makes a decision - suggests interrupt moderation configuration fields.
+#. Applies a schedule work function, which applies suggested configuration.
 
 The first two steps are straightforward, both the new and the previous data are
 supplied by the driver registered to Net DIM. The previous data is the new data
@@ -89,19 +82,21 @@
 under some conditions.
 
 
-Part III: Registering a Network Device to DIM
-==============================================
+Registering a Network Device to DIM
+===================================
 
-Net DIM API exposes the main function net_dim(struct dim *dim,
-struct dim_sample end_sample). This function is the entry point to the Net
+Net DIM API exposes the main function net_dim().
+This function is the entry point to the Net
 DIM algorithm and has to be called every time the driver would like to check if
 it should change interrupt moderation parameters. The driver should provide two
-data structures: struct dim and struct dim_sample. Struct dim
+data structures: :c:type:`struct dim <dim>` and
+:c:type:`struct dim_sample <dim_sample>`. :c:type:`struct dim <dim>`
 describes the state of DIM for a specific object (RX queue, TX queue,
 other queues, etc.). This includes the current selected profile, previous data
 samples, the callback function provided by the driver and more.
-Struct dim_sample describes a data sample, which will be compared to the
-data sample stored in struct dim in order to decide on the algorithm's next
+:c:type:`struct dim_sample <dim_sample>` describes a data sample,
+which will be compared to the data sample stored in :c:type:`struct dim <dim>`
+in order to decide on the algorithm's next
 step. The sample should include bytes, packets and interrupts, measured by
 the driver.
 
@@ -110,9 +105,10 @@
 interrupt. Since Net DIM has a built-in moderation and it might decide to skip
 iterations under certain conditions, there is no need to moderate the net_dim()
 calls as well. As mentioned above, the driver needs to provide an object of type
-struct dim to the net_dim() function call. It is advised for each entity
-using Net DIM to hold a struct dim as part of its data structure and use it
-as the main Net DIM API object. The struct dim_sample should hold the latest
+:c:type:`struct dim <dim>` to the net_dim() function call. It is advised for
+each entity using Net DIM to hold a :c:type:`struct dim <dim>` as part of its
+data structure and use it as the main Net DIM API object.
+The :c:type:`struct dim_sample <dim_sample>` should hold the latest
 bytes, packets and interrupts count. No need to perform any calculations, just
 include the raw data.
 
@@ -124,19 +120,19 @@
 the proper state in order to move to the next iteration.
 
 
-Part IV: Example
-=================
+Example
+=======
 
 The following code demonstrates how to register a driver to Net DIM. The actual
 usage is not complete but it should make the outline of the usage clear.
 
-my_driver.c:
+.. code-block:: c
 
-#include <linux/dim.h>
+  #include <linux/dim.h>
 
-/* Callback for net DIM to schedule on a decision to change moderation */
-void my_driver_do_dim_work(struct work_struct *work)
-{
+  /* Callback for net DIM to schedule on a decision to change moderation */
+  void my_driver_do_dim_work(struct work_struct *work)
+  {
 	/* Get struct dim from struct work_struct */
 	struct dim *dim = container_of(work, struct dim,
 				       work);
@@ -145,11 +141,11 @@
 
 	/* Signal net DIM work is done and it should move to next iteration */
 	dim->state = DIM_START_MEASURE;
-}
+  }
 
-/* My driver's interrupt handler */
-int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
-{
+  /* My driver's interrupt handler */
+  int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
+  {
 	...
 	/* A struct to hold current measured data */
 	struct dim_sample dim_sample;
@@ -162,13 +158,19 @@
 	/* Call net DIM */
 	net_dim(&my_entity->dim, dim_sample);
 	...
-}
+  }
 
-/* My entity's initialization function (my_entity was already allocated) */
-int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...)
-{
+  /* My entity's initialization function (my_entity was already allocated) */
+  int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...)
+  {
 	...
 	/* Initiate struct work_struct with my driver's callback function */
 	INIT_WORK(&my_entity->dim.work, my_driver_do_dim_work);
 	...
-}
+  }
+
+Dynamic Interrupt Moderation (DIM) library API
+==============================================
+
+.. kernel-doc:: include/linux/dim.h
+    :internal:
diff --git a/Documentation/usb/raw-gadget.rst b/Documentation/usb/raw-gadget.rst
index 9e78cb8..68d879a 100644
--- a/Documentation/usb/raw-gadget.rst
+++ b/Documentation/usb/raw-gadget.rst
@@ -27,9 +27,8 @@
 3. Raw Gadget provides a way to select a UDC device/driver to bind to,
    while GadgetFS currently binds to the first available UDC.
 
-4. Raw Gadget uses predictable endpoint names (handles) across different
-   UDCs (as long as UDCs have enough endpoints of each required transfer
-   type).
+4. Raw Gadget explicitly exposes information about endpoints addresses and
+   capabilities allowing a user to write UDC-agnostic gadgets.
 
 5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
 
@@ -50,12 +49,36 @@
    Raw Gadget and react to those depending on what kind of USB device
    needs to be emulated.
 
+Note, that some UDC drivers have fixed addresses assigned to endpoints, and
+therefore arbitrary endpoint addresses can't be used in the descriptors.
+Nevertheles, Raw Gadget provides a UDC-agnostic way to write USB gadgets.
+Once a USB_RAW_EVENT_CONNECT event is received via USB_RAW_IOCTL_EVENT_FETCH,
+the USB_RAW_IOCTL_EPS_INFO ioctl can be used to find out information about
+endpoints that the UDC driver has. Based on that information, the user must
+chose UDC endpoints that will be used for the gadget being emulated, and
+properly assign addresses in endpoint descriptors.
+
+You can find usage examples (along with a test suite) here:
+
+https://github.com/xairy/raw-gadget
+
+Internal details
+~~~~~~~~~~~~~~~~
+
+Currently every endpoint read/write ioctl submits a USB request and waits until
+its completion. This is the desired mode for coverage-guided fuzzing (as we'd
+like all USB request processing happen during the lifetime of a syscall),
+and must be kept in the implementation. (This might be slow for real world
+applications, thus the O_NONBLOCK improvement suggestion below.)
+
 Potential future improvements
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-- Implement ioctl's for setting/clearing halt status on endpoints.
-
-- Reporting more events (suspend, resume, etc.) through
-  USB_RAW_IOCTL_EVENT_FETCH.
+- Report more events (suspend, resume, etc.) through USB_RAW_IOCTL_EVENT_FETCH.
 
 - Support O_NONBLOCK I/O.
+
+- Support USB 3 features (accept SS endpoint companion descriptor when
+  enabling endpoints; allow providing stream_id for bulk transfers).
+
+- Support ISO transfer features (expose frame_number for completed requests).
diff --git a/Documentation/virt/kvm/index.rst b/Documentation/virt/kvm/index.rst
index dcc2526..b6833c7 100644
--- a/Documentation/virt/kvm/index.rst
+++ b/Documentation/virt/kvm/index.rst
@@ -28,3 +28,5 @@
    arm/index
 
    devices/index
+
+   running-nested-guests
diff --git a/Documentation/virt/kvm/running-nested-guests.rst b/Documentation/virt/kvm/running-nested-guests.rst
new file mode 100644
index 0000000..d0a1fc7
--- /dev/null
+++ b/Documentation/virt/kvm/running-nested-guests.rst
@@ -0,0 +1,276 @@
+==============================
+Running nested guests with KVM
+==============================
+
+A nested guest is the ability to run a guest inside another guest (it
+can be KVM-based or a different hypervisor).  The straightforward
+example is a KVM guest that in turn runs on a KVM guest (the rest of
+this document is built on this example)::
+
+              .----------------.  .----------------.
+              |                |  |                |
+              |      L2        |  |      L2        |
+              | (Nested Guest) |  | (Nested Guest) |
+              |                |  |                |
+              |----------------'--'----------------|
+              |                                    |
+              |       L1 (Guest Hypervisor)        |
+              |          KVM (/dev/kvm)            |
+              |                                    |
+      .------------------------------------------------------.
+      |                 L0 (Host Hypervisor)                 |
+      |                    KVM (/dev/kvm)                    |
+      |------------------------------------------------------|
+      |        Hardware (with virtualization extensions)     |
+      '------------------------------------------------------'
+
+Terminology:
+
+- L0 – level-0; the bare metal host, running KVM
+
+- L1 – level-1 guest; a VM running on L0; also called the "guest
+  hypervisor", as it itself is capable of running KVM.
+
+- L2 – level-2 guest; a VM running on L1, this is the "nested guest"
+
+.. note:: The above diagram is modelled after the x86 architecture;
+          s390x, ppc64 and other architectures are likely to have
+          a different design for nesting.
+
+          For example, s390x always has an LPAR (LogicalPARtition)
+          hypervisor running on bare metal, adding another layer and
+          resulting in at least four levels in a nested setup — L0 (bare
+          metal, running the LPAR hypervisor), L1 (host hypervisor), L2
+          (guest hypervisor), L3 (nested guest).
+
+          This document will stick with the three-level terminology (L0,
+          L1, and L2) for all architectures; and will largely focus on
+          x86.
+
+
+Use Cases
+---------
+
+There are several scenarios where nested KVM can be useful, to name a
+few:
+
+- As a developer, you want to test your software on different operating
+  systems (OSes).  Instead of renting multiple VMs from a Cloud
+  Provider, using nested KVM lets you rent a large enough "guest
+  hypervisor" (level-1 guest).  This in turn allows you to create
+  multiple nested guests (level-2 guests), running different OSes, on
+  which you can develop and test your software.
+
+- Live migration of "guest hypervisors" and their nested guests, for
+  load balancing, disaster recovery, etc.
+
+- VM image creation tools (e.g. ``virt-install``,  etc) often run
+  their own VM, and users expect these to work inside a VM.
+
+- Some OSes use virtualization internally for security (e.g. to let
+  applications run safely in isolation).
+
+
+Enabling "nested" (x86)
+-----------------------
+
+From Linux kernel v4.19 onwards, the ``nested`` KVM parameter is enabled
+by default for Intel and AMD.  (Though your Linux distribution might
+override this default.)
+
+In case you are running a Linux kernel older than v4.19, to enable
+nesting, set the ``nested`` KVM module parameter to ``Y`` or ``1``.  To
+persist this setting across reboots, you can add it in a config file, as
+shown below:
+
+1. On the bare metal host (L0), list the kernel modules and ensure that
+   the KVM modules::
+
+    $ lsmod | grep -i kvm
+    kvm_intel             133627  0
+    kvm                   435079  1 kvm_intel
+
+2. Show information for ``kvm_intel`` module::
+
+    $ modinfo kvm_intel | grep -i nested
+    parm:           nested:bool
+
+3. For the nested KVM configuration to persist across reboots, place the
+   below in ``/etc/modprobed/kvm_intel.conf`` (create the file if it
+   doesn't exist)::
+
+    $ cat /etc/modprobe.d/kvm_intel.conf
+    options kvm-intel nested=y
+
+4. Unload and re-load the KVM Intel module::
+
+    $ sudo rmmod kvm-intel
+    $ sudo modprobe kvm-intel
+
+5. Verify if the ``nested`` parameter for KVM is enabled::
+
+    $ cat /sys/module/kvm_intel/parameters/nested
+    Y
+
+For AMD hosts, the process is the same as above, except that the module
+name is ``kvm-amd``.
+
+
+Additional nested-related kernel parameters (x86)
+-------------------------------------------------
+
+If your hardware is sufficiently advanced (Intel Haswell processor or
+higher, which has newer hardware virt extensions), the following
+additional features will also be enabled by default: "Shadow VMCS
+(Virtual Machine Control Structure)", APIC Virtualization on your bare
+metal host (L0).  Parameters for Intel hosts::
+
+    $ cat /sys/module/kvm_intel/parameters/enable_shadow_vmcs
+    Y
+
+    $ cat /sys/module/kvm_intel/parameters/enable_apicv
+    Y
+
+    $ cat /sys/module/kvm_intel/parameters/ept
+    Y
+
+.. note:: If you suspect your L2 (i.e. nested guest) is running slower,
+          ensure the above are enabled (particularly
+          ``enable_shadow_vmcs`` and ``ept``).
+
+
+Starting a nested guest (x86)
+-----------------------------
+
+Once your bare metal host (L0) is configured for nesting, you should be
+able to start an L1 guest with::
+
+    $ qemu-kvm -cpu host [...]
+
+The above will pass through the host CPU's capabilities as-is to the
+gues); or for better live migration compatibility, use a named CPU
+model supported by QEMU. e.g.::
+
+    $ qemu-kvm -cpu Haswell-noTSX-IBRS,vmx=on
+
+then the guest hypervisor will subsequently be capable of running a
+nested guest with accelerated KVM.
+
+
+Enabling "nested" (s390x)
+-------------------------
+
+1. On the host hypervisor (L0), enable the ``nested`` parameter on
+   s390x::
+
+    $ rmmod kvm
+    $ modprobe kvm nested=1
+
+.. note:: On s390x, the kernel parameter ``hpage`` is mutually exclusive
+          with the ``nested`` paramter — i.e. to be able to enable
+          ``nested``, the ``hpage`` parameter *must* be disabled.
+
+2. The guest hypervisor (L1) must be provided with the ``sie`` CPU
+   feature — with QEMU, this can be done by using "host passthrough"
+   (via the command-line ``-cpu host``).
+
+3. Now the KVM module can be loaded in the L1 (guest hypervisor)::
+
+    $ modprobe kvm
+
+
+Live migration with nested KVM
+------------------------------
+
+Migrating an L1 guest, with a  *live* nested guest in it, to another
+bare metal host, works as of Linux kernel 5.3 and QEMU 4.2.0 for
+Intel x86 systems, and even on older versions for s390x.
+
+On AMD systems, once an L1 guest has started an L2 guest, the L1 guest
+should no longer be migrated or saved (refer to QEMU documentation on
+"savevm"/"loadvm") until the L2 guest shuts down.  Attempting to migrate
+or save-and-load an L1 guest while an L2 guest is running will result in
+undefined behavior.  You might see a ``kernel BUG!`` entry in ``dmesg``, a
+kernel 'oops', or an outright kernel panic.  Such a migrated or loaded L1
+guest can no longer be considered stable or secure, and must be restarted.
+Migrating an L1 guest merely configured to support nesting, while not
+actually running L2 guests, is expected to function normally even on AMD
+systems but may fail once guests are started.
+
+Migrating an L2 guest is always expected to succeed, so all the following
+scenarios should work even on AMD systems:
+
+- Migrating a nested guest (L2) to another L1 guest on the *same* bare
+  metal host.
+
+- Migrating a nested guest (L2) to another L1 guest on a *different*
+  bare metal host.
+
+- Migrating a nested guest (L2) to a bare metal host.
+
+Reporting bugs from nested setups
+-----------------------------------
+
+Debugging "nested" problems can involve sifting through log files across
+L0, L1 and L2; this can result in tedious back-n-forth between the bug
+reporter and the bug fixer.
+
+- Mention that you are in a "nested" setup.  If you are running any kind
+  of "nesting" at all, say so.  Unfortunately, this needs to be called
+  out because when reporting bugs, people tend to forget to even
+  *mention* that they're using nested virtualization.
+
+- Ensure you are actually running KVM on KVM.  Sometimes people do not
+  have KVM enabled for their guest hypervisor (L1), which results in
+  them running with pure emulation or what QEMU calls it as "TCG", but
+  they think they're running nested KVM.  Thus confusing "nested Virt"
+  (which could also mean, QEMU on KVM) with "nested KVM" (KVM on KVM).
+
+Information to collect (generic)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following is not an exhaustive list, but a very good starting point:
+
+  - Kernel, libvirt, and QEMU version from L0
+
+  - Kernel, libvirt and QEMU version from L1
+
+  - QEMU command-line of L1 -- when using libvirt, you'll find it here:
+    ``/var/log/libvirt/qemu/instance.log``
+
+  - QEMU command-line of L2 -- as above, when using libvirt, get the
+    complete libvirt-generated QEMU command-line
+
+  - ``cat /sys/cpuinfo`` from L0
+
+  - ``cat /sys/cpuinfo`` from L1
+
+  - ``lscpu`` from L0
+
+  - ``lscpu`` from L1
+
+  - Full ``dmesg`` output from L0
+
+  - Full ``dmesg`` output from L1
+
+x86-specific info to collect
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Both the below commands, ``x86info`` and ``dmidecode``, should be
+available on most Linux distributions with the same name:
+
+  - Output of: ``x86info -a`` from L0
+
+  - Output of: ``x86info -a`` from L1
+
+  - Output of: ``dmidecode`` from L0
+
+  - Output of: ``dmidecode`` from L1
+
+s390x-specific info to collect
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Along with the earlier mentioned generic details, the below is
+also recommended:
+
+  - ``/proc/sysinfo`` from L1; this will also include the info from L0
diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst
index fa7ddc0..5325c71 100644
--- a/Documentation/x86/boot.rst
+++ b/Documentation/x86/boot.rst
@@ -1399,8 +1399,8 @@
 must be __BOOT_DS; interrupt must be disabled; %rsi must hold the base
 address of the struct boot_params.
 
-EFI Handover Protocol
-=====================
+EFI Handover Protocol (deprecated)
+==================================
 
 This protocol allows boot loaders to defer initialisation to the EFI
 boot stub. The boot loader is required to load the kernel/initrd(s)
@@ -1408,6 +1408,12 @@
 which is hdr->handover_offset bytes from the beginning of
 startup_{32,64}.
 
+The boot loader MUST respect the kernel's PE/COFF metadata when it comes
+to section alignment, the memory footprint of the executable image beyond
+the size of the file itself, and any other aspect of the PE/COFF header
+that may affect correct operation of the image as a PE/COFF binary in the
+execution context provided by the EFI firmware.
+
 The function prototype for the handover entry point looks like this::
 
     efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp)
@@ -1419,9 +1425,18 @@
 
 The boot loader *must* fill out the following fields in bp::
 
-  - hdr.code32_start
   - hdr.cmd_line_ptr
   - hdr.ramdisk_image (if applicable)
   - hdr.ramdisk_size  (if applicable)
 
 All other fields should be zero.
+
+NOTE: The EFI Handover Protocol is deprecated in favour of the ordinary PE/COFF
+      entry point, combined with the LINUX_EFI_INITRD_MEDIA_GUID based initrd
+      loading protocol (refer to [0] for an example of the bootloader side of
+      this), which removes the need for any knowledge on the part of the EFI
+      bootloader regarding the internal representation of boot_params or any
+      requirements/limitations regarding the placement of the command line
+      and ramdisk in memory, or the placement of the kernel image itself.
+
+[0] https://github.com/u-boot/u-boot/commit/ec80b4735a593961fe701cc3a5d717d4739b0fd0
diff --git a/MAINTAINERS b/MAINTAINERS
index e64e5db..7b58ca2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -189,7 +189,7 @@
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 F:	Documentation/driver-api/80211/cfg80211.rst
@@ -505,7 +505,7 @@
 ADM8211 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 F:	drivers/net/wireless/admtek/adm8211.*
 
 ADP1653 FLASH CONTROLLER DRIVER
@@ -570,7 +570,7 @@
 F:	drivers/input/misc/adxl34x.c
 
 ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <michael.hennerich@analog.com>
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -922,7 +922,7 @@
 F:	drivers/net/ethernet/amd/xgbe/
 
 ANALOG DEVICES INC AD5686 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -930,7 +930,7 @@
 F:	drivers/iio/dac/ad5696*
 
 ANALOG DEVICES INC AD5758 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -946,7 +946,7 @@
 F:	drivers/iio/adc/ad7091r5.c
 
 ANALOG DEVICES INC AD7124 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -970,7 +970,7 @@
 F:	drivers/iio/adc/ad7292.c
 
 ANALOG DEVICES INC AD7606 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 M:	Beniamin Bia <beniamin.bia@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
@@ -979,7 +979,7 @@
 F:	drivers/iio/adc/ad7606.c
 
 ANALOG DEVICES INC AD7768-1 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -1040,7 +1040,7 @@
 F:	drivers/hwmon/adm1177.c
 
 ANALOG DEVICES INC ADP5061 DRIVER
-M:	Stefan Popa <stefan.popa@analog.com>
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -1109,7 +1109,6 @@
 ANALOG DEVICES INC IIO DRIVERS
 M:	Lars-Peter Clausen <lars@metafoo.de>
 M:	Michael Hennerich <Michael.Hennerich@analog.com>
-M:	Stefan Popa <stefan.popa@analog.com>
 S:	Supported
 W:	http://wiki.analog.com/
 W:	http://ez.analog.com/community/linux-device-drivers
@@ -1323,7 +1322,10 @@
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/arm/arm-boards
+F:	Documentation/devicetree/bindings/arm/arm,integrator.yaml
+F:	Documentation/devicetree/bindings/arm/arm,realview.yaml
+F:	Documentation/devicetree/bindings/arm/arm,versatile.yaml
+F:	Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
 F:	Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
 F:	Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
 F:	Documentation/devicetree/bindings/i2c/i2c-versatile.txt
@@ -2847,14 +2849,14 @@
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/en/users/Drivers/ath5k
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath5k
 F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH6KL WIRELESS DRIVER
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/ath6kl
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath6kl
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	drivers/net/wireless/ath/ath6kl/
 
@@ -3017,7 +3019,7 @@
 L:	linux-wireless@vger.kernel.org
 L:	b43-dev@lists.infradead.org
 S:	Odd Fixes
-W:	http://wireless.kernel.org/en/users/Drivers/b43
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/b43
 F:	drivers/net/wireless/broadcom/b43/
 
 B43LEGACY WIRELESS DRIVER
@@ -3025,7 +3027,7 @@
 L:	linux-wireless@vger.kernel.org
 L:	b43-dev@lists.infradead.org
 S:	Maintained
-W:	http://wireless.kernel.org/en/users/Drivers/b43
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/b43
 F:	drivers/net/wireless/broadcom/b43legacy/
 
 BACKLIGHT CLASS/SUBSYSTEM
@@ -3655,7 +3657,7 @@
 S:	Maintained
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux.git
 F:	Documentation/filesystems/btrfs.rst
 F:	fs/btrfs/
 F:	include/linux/btrfs*
@@ -3840,7 +3842,7 @@
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/en/users/Drivers/carl9170
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/carl9170
 F:	drivers/net/wireless/ath/carl9170/
 
 CAVIUM I2C DRIVER
@@ -3934,11 +3936,9 @@
 CEPH COMMON CODE (LIBCEPH)
 M:	Ilya Dryomov <idryomov@gmail.com>
 M:	Jeff Layton <jlayton@kernel.org>
-M:	Sage Weil <sage@redhat.com>
 L:	ceph-devel@vger.kernel.org
 S:	Supported
 W:	http://ceph.com/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 T:	git git://github.com/ceph/ceph-client.git
 F:	include/linux/ceph/
 F:	include/linux/crush/
@@ -3946,12 +3946,10 @@
 
 CEPH DISTRIBUTED FILE SYSTEM CLIENT (CEPH)
 M:	Jeff Layton <jlayton@kernel.org>
-M:	Sage Weil <sage@redhat.com>
 M:	Ilya Dryomov <idryomov@gmail.com>
 L:	ceph-devel@vger.kernel.org
 S:	Supported
 W:	http://ceph.com/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 T:	git git://github.com/ceph/ceph-client.git
 F:	Documentation/filesystems/ceph.rst
 F:	fs/ceph/
@@ -5173,6 +5171,7 @@
 F:	drivers/soc/fsl/dpio
 
 DPAA2 ETHERNET DRIVER
+M:	Ioana Ciornei <ioana.ciornei@nxp.com>
 M:	Ioana Radulescu <ruxandra.radulescu@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -5552,7 +5551,7 @@
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 T:	git git://anongit.freedesktop.org/drm/drm-misc
-F:	Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+F:	Documentation/devicetree/bindings/display/allwinner*
 F:	drivers/gpu/drm/sun4i/
 
 DRM DRIVERS FOR AMLOGIC SOCS
@@ -5932,6 +5931,7 @@
 DYNAMIC INTERRUPT MODERATION
 M:	Tal Gilboa <talgi@mellanox.com>
 S:	Maintained
+F:	Documentation/networking/net_dim.rst
 F:	include/linux/dim.h
 F:	lib/dim/
 
@@ -7115,9 +7115,10 @@
 
 GENERIC PHY FRAMEWORK
 M:	Kishon Vijay Abraham I <kishon@ti.com>
+M:	Vinod Koul <vkoul@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git
 F:	Documentation/devicetree/bindings/phy/
 F:	drivers/phy/
 F:	include/linux/phy/
@@ -7742,11 +7743,6 @@
 S:	Orphan
 F:	drivers/platform/x86/tc1100-wmi.c
 
-HP100:	Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
-M:	Jaroslav Kysela <perex@perex.cz>
-S:	Obsolete
-F:	drivers/staging/hp/hp100.*
-
 HPET:	High Precision Event Timers driver
 M:	Clemens Ladisch <clemens@ladisch.de>
 S:	Maintained
@@ -7945,7 +7941,7 @@
 F:	drivers/i2c/busses/i2c-parport.c
 
 I2C SUBSYSTEM
-M:	Wolfram Sang <wsa@the-dreams.de>
+M:	Wolfram Sang <wsa@kernel.org>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 W:	https://i2c.wiki.kernel.org/
@@ -9325,6 +9321,7 @@
 M:	Janosch Frank <frankja@linux.ibm.com>
 R:	David Hildenbrand <david@redhat.com>
 R:	Cornelia Huck <cohuck@redhat.com>
+R:	Claudio Imbrenda <imbrenda@linux.ibm.com>
 L:	kvm@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -9412,6 +9409,13 @@
 F:	include/uapi/linux/keyctl.h
 F:	security/keys/
 
+KFIFO
+M:	Stefani Seibold <stefani@seibold.net>
+S:	Maintained
+F:	include/linux/kfifo.h
+F:	lib/kfifo.c
+F:	samples/kfifo/
+
 KGDB / KDB /debug_core
 M:	Jason Wessel <jason.wessel@windriver.com>
 M:	Daniel Thompson <daniel.thompson@linaro.org>
@@ -10063,7 +10067,7 @@
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 F:	Documentation/networking/mac80211-injection.txt
@@ -10658,6 +10662,13 @@
 S:	Maintained
 F:	drivers/net/ethernet/mediatek/
 
+MEDIATEK I2C CONTROLLER DRIVER
+M:	Qii Wang <qii.wang@mediatek.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+F:	drivers/i2c/busses/i2c-mt65xx.c
+
 MEDIATEK JPEG DRIVER
 M:	Rick Chang <rick.chang@mediatek.com>
 M:	Bin Liu <bin.liu@mediatek.com>
@@ -10693,7 +10704,6 @@
 M:	Felix Fietkau <nbd@nbd.name>
 M:	Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
 R:	Ryder Lee <ryder.lee@mediatek.com>
-R:	Roy Luo <royluo@google.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/mediatek/mt76/
@@ -11707,8 +11717,9 @@
 
 NETWORKING DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>
+M:	Jakub Kicinski <kuba@kernel.org>
 L:	netdev@vger.kernel.org
-S:	Odd Fixes
+S:	Maintained
 W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
@@ -12644,7 +12655,7 @@
 ORINOCO DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
-W:	http://wireless.kernel.org/en/users/Drivers/orinoco
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/orinoco
 W:	http://www.nongnu.org/orinoco/
 F:	drivers/net/wireless/intersil/orinoco/
 
@@ -12670,7 +12681,7 @@
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/en/users/Drivers/p54
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/p54
 F:	drivers/net/wireless/intersil/p54/
 
 PACKING
@@ -13038,7 +13049,7 @@
 
 PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-R:	Andrew Murray <amurray@thegoodpenguin.co.uk>
+R:	Rob Herring <robh@kernel.org>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 Q:	http://patchwork.ozlabs.org/project/linux-pci/list/
@@ -13591,7 +13602,7 @@
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Obsolete
-W:	http://wireless.kernel.org/en/users/Drivers/p54
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/p54
 F:	drivers/net/wireless/intersil/prism54/
 
 PROC FILESYSTEM
@@ -13853,7 +13864,8 @@
 F:	drivers/scsi/qla1280.[ch]
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-M:	hmadhani@marvell.com
+M:	Nilesh Javali <njavali@marvell.com>
+M:	GR-QLogic-Storage-Upstream@marvell.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla2xxx
@@ -13931,7 +13943,7 @@
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	ath10k@lists.infradead.org
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/ath10k
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	drivers/net/wireless/ath/ath10k/
 
@@ -13946,7 +13958,7 @@
 M:	QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/ath9k
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath9k
 F:	drivers/net/wireless/ath/ath9k/
 
 QUALCOMM CAMERA SUBSYSTEM DRIVER
@@ -14043,13 +14055,12 @@
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	wcn36xx@lists.infradead.org
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/wcn36xx
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/wcn36xx
 T:	git git://github.com/KrasnikovEugene/wcn36xx.git
 F:	drivers/net/wireless/ath/wcn36xx/
 
 QUANTENNA QTNFMAC WIRELESS DRIVER
 M:	Igor Mitsyanko <imitsyanko@quantenna.com>
-M:	Avinash Patil <avinashp@quantenna.com>
 M:	Sergey Matyukevich <smatyukevich@quantenna.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
@@ -14091,12 +14102,10 @@
 
 RADOS BLOCK DEVICE (RBD)
 M:	Ilya Dryomov <idryomov@gmail.com>
-M:	Sage Weil <sage@redhat.com>
 R:	Dongsheng Yang <dongsheng.yang@easystack.cn>
 L:	ceph-devel@vger.kernel.org
 S:	Supported
 W:	http://ceph.com/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 T:	git git://github.com/ceph/ceph-client.git
 F:	Documentation/ABI/testing/sysfs-bus-rbd
 F:	drivers/block/rbd.c
@@ -14271,7 +14280,7 @@
 M:	Ping-Ke Shih <pkshih@realtek.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 F:	drivers/net/wireless/realtek/rtlwifi/
 
@@ -14406,7 +14415,7 @@
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 F:	Documentation/ABI/stable/sysfs-class-rfkill
@@ -14555,7 +14564,7 @@
 RTL8180 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 F:	drivers/net/wireless/realtek/rtl818x/rtl8180/
 
@@ -14565,7 +14574,7 @@
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 F:	drivers/net/wireless/realtek/rtl818x/rtl8187/
 
@@ -14633,6 +14642,7 @@
 
 S390 IUCV NETWORK LAYER
 M:	Julian Wiedmann <jwi@linux.ibm.com>
+M:	Karsten Graul <kgraul@linux.ibm.com>
 M:	Ursula Braun <ubraun@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
@@ -14643,6 +14653,7 @@
 
 S390 NETWORK DRIVERS
 M:	Julian Wiedmann <jwi@linux.ibm.com>
+M:	Karsten Graul <kgraul@linux.ibm.com>
 M:	Ursula Braun <ubraun@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
@@ -16920,8 +16931,8 @@
 TI WILINK WIRELESS DRIVERS
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
-W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
-W:	http://wireless.kernel.org/en/users/Drivers/wl1251
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/wl12xx
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/wl1251
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
 F:	drivers/net/wireless/ti/
 F:	include/linux/wl12xx.h
@@ -18203,7 +18214,7 @@
 L:	linux-wireless@vger.kernel.org
 L:	wil6210@qti.qualcomm.com
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/wil6210
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/wil6210
 F:	drivers/net/wireless/ath/wil6210/
 
 WIMAX STACK
diff --git a/Makefile b/Makefile
index 70def49..04f5662 100644
--- a/Makefile
+++ b/Makefile
@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc6
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*
@@ -729,10 +729,6 @@
 KBUILD_CFLAGS += -Os
 endif
 
-ifdef CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED
-KBUILD_CFLAGS   += -Wno-maybe-uninitialized
-endif
-
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
 KBUILD_CFLAGS	+= $(call cc-option,-fno-allow-store-data-races)
@@ -881,6 +877,17 @@
 # disable stringop warnings in gcc 8+
 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
 
+# We'll want to enable this eventually, but it's not going away for 5.7 at least
+KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
+
+# Another good warning that we'll want to enable eventually
+KBUILD_CFLAGS += $(call cc-disable-warning, restrict)
+
+# Enabled with W=2, disabled by default as noisy
+KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
+
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
diff --git a/arch/arc/include/asm/module.h b/arch/arc/include/asm/module.h
index 48f13a4..f534a1f 100644
--- a/arch/arc/include/asm/module.h
+++ b/arch/arc/include/asm/module.h
@@ -3,7 +3,6 @@
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
  * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
-
  */
 
 #ifndef _ASM_ARC_MODULE_H
@@ -19,8 +18,4 @@
 	const char *secstr;
 };
 
-#define MODULE_PROC_FAMILY "ARC700"
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
 #endif /* _ASM_ARC_MODULE_H */
diff --git a/arch/arc/include/asm/vermagic.h b/arch/arc/include/asm/vermagic.h
new file mode 100644
index 0000000..a10257d
--- /dev/null
+++ b/arch/arc/include/asm/vermagic.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "ARC700"
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 66a04f6..c77c93c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
 	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_SETUP_DMA_OPS
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index cabdd8f..e8e1c86 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1450,7 +1450,8 @@
 		@ running beyond the PoU, and so calling cache_off below from
 		@ inside the PE/COFF loader allocated region is unsafe unless
 		@ we explicitly clean it to the PoC.
-		adr	r0, call_cache_fn		@ region of code we will
+ ARM(		adrl	r0, call_cache_fn	)
+ THUMB(		adr	r0, call_cache_fn	)	@ region of code we will
 		adr	r1, 0f				@ run with MMU off
 		bl	cache_clean_flush
 		bl	cache_off
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index fa00880..85c95cc 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -40,3 +40,7 @@
 	status = "okay";
 	dual_emac;
 };
+
+&m_can0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index fd2c766e..f7ae5a4 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -14,6 +14,9 @@
 	soc {
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
 			mboxes = <&mailbox>;
 			dma-ranges;
 		};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index e1abe8c..b83a864 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -372,6 +372,7 @@
 					     "dsi0_ddr2",
 					     "dsi0_ddr";
 
+			status = "disabled";
 		};
 
 		aux: aux@7e215000 {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 4740989..7191ee6 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -172,6 +172,7 @@
 			#address-cells = <1>;
 			ranges = <0x51000000 0x51000000 0x3000
 				  0x0	     0x20000000 0x10000000>;
+			dma-ranges;
 			/**
 			 * To enable PCI endpoint mode, disable the pcie1_rc
 			 * node and enable pcie1_ep mode.
@@ -185,7 +186,6 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
-				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -230,6 +230,7 @@
 			#address-cells = <1>;
 			ranges = <0x51800000 0x51800000 0x3000
 				  0x0	     0x30000000 0x10000000>;
+			dma-ranges;
 			status = "disabled";
 			pcie2_rc: pcie@51800000 {
 				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
@@ -240,7 +241,6 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
-				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 0cd75da..1886397 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -75,8 +75,8 @@
 	imx27-phycard-s-rdk {
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
index 0d594e4..a1173bf 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -38,7 +38,7 @@
 };
 
 &switch_ports {
-	/delete-node/ port@2;
+	/delete-node/ port@3;
 };
 
 &touchscreen {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 4798288..98da446 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1039,13 +1039,13 @@
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupt-names = "int0", "pps";
-				interrupts-extended =
-					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
-					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>;
 				clock-names = "ipg", "ahb", "ptp";
+				gpr = <&gpr>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 93b89dc..b310f13 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -77,7 +77,6 @@
 };
 
 &fec {
-	/delete-property/interrupts-extended;
 	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
 		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
index ede2e0c..e10f992 100644
--- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
@@ -72,8 +72,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index 9067e0e..06fbffa 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -367,6 +367,8 @@
 };
 
 &mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
 	/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
 	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
@@ -472,6 +474,37 @@
 		>;
 	};
 
+	/*
+	 * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
+	 * for gpio_100, but the internal pull makes wlan flakey on some
+	 * devices. Off mode value should be tested if we have off mode working
+	 * later on.
+	 */
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+		/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
+		OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
+
+		/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
+		OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
+		OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
+		OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
+
+		/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
+		OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
+		OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
+		OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
+		>;
+	};
+
 	/* gpmc_ncs0.gpio_50 */
 	poweroff_gpio: pinmux_poweroff_pins {
 		pinctrl-single,pins = <
@@ -690,14 +723,18 @@
 };
 
 /*
- * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
- * uart1 wakeirq.
+ * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
+ * for wake-up events for both the USB PHY and the UART. We can use gpio_149
+ * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
+ * have gpio_149 trigger before the UART transfer starts.
  */
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
 	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0xfc>;
+			       &omap4_pmx_core 0x110>;
+	uart-has-rtscts;
+	current-speed = <115200>;
 };
 
 &uart3 {
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index a075b63..11d41e8 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -341,6 +341,11 @@
 	status = "disabled";
 };
 
+/* RNG not directly accessible on N950/N9. */
+&rng_target {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
index 72b7977..cace438 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -304,7 +304,6 @@
 			reg = <0xe803b000 0x30>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 36>;
-			clock-names = "ostm0";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
@@ -314,7 +313,6 @@
 			reg = <0xe803c000 0x30>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 35>;
-			clock-names = "ostm1";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
@@ -324,7 +322,6 @@
 			reg = <0xe803d000 0x30>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD 34>;
-			clock-names = "ostm2";
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index a5cd312..a3ba722 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -131,7 +131,14 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index ebc1ff6..90feb2c 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -479,7 +479,7 @@
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7740-cpg-clocks";
 			reg = <0xe6150000 0x10000>;
-			clocks = <&extal1_clk>, <&extalr_clk>;
+			clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "system", "pllc0", "pllc1",
 					     "pllc2", "r",
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index 92aa26b..b1f679d 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -84,8 +84,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 69745de..bfe778c 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -364,8 +364,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index 4138efb..6a457bc 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -297,8 +297,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 687167b..fc74c6c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -387,8 +387,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index a8e0335..114bf1c 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -181,8 +181,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index 248eb71..9368ac2 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -289,8 +289,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index bd2a63b..ba2d2a5 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -249,14 +249,12 @@
 	 */
 	hdmi@3d {
 		compatible = "adi,adv7513";
-		reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
+		reg-names = "main", "edid", "cec", "packet";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
@@ -280,14 +278,12 @@
 
 	hdmi@39 {
 		compatible = "adi,adv7513";
-		reg = <0x39>, <0x29>, <0x49>, <0x59>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x39>, <0x49>, <0x29>, <0x59>;
+		reg-names = "main", "edid", "cec", "packet";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index cfe06a7..79baf06 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -366,8 +366,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 9aaa96e..b8b0941 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -255,8 +255,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 781ac75..d9a0c9a2 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -128,7 +128,7 @@
 		assigned-clocks = <&cru SCLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index 5670b33f..aed879d 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -46,7 +46,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			clocks = <&cru SCLK_MAC_PHY>;
diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts
index 679fc2b..933ef69 100644
--- a/arch/arm/boot/dts/rk3229-xms6.dts
+++ b/arch/arm/boot/dts/rk3229-xms6.dts
@@ -150,7 +150,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400",
 			             "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 06172eb..5485a99 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -555,7 +555,7 @@
 				  "pp1",
 				  "ppmmu1";
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU_A>;
 		status = "disabled";
 	};
@@ -1020,7 +1020,7 @@
 			};
 		};
 
-		spi-0 {
+		spi0 {
 			spi0_clk: spi0-clk {
 				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
 			};
@@ -1038,7 +1038,7 @@
 			};
 		};
 
-		spi-1 {
+		spi1 {
 			spi1_clk: spi1-clk {
 				rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
 			};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index f9fcb7e9..d929b60 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -84,7 +84,7 @@
 		compatible = "arm,mali-400";
 		reg = <0x10090000 0x10000>;
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		assigned-clocks = <&cru ACLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_GPU>;
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 11e2211..84a3b05 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -147,6 +147,7 @@
 CONFIG_SPI=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 3cc3ca5..8b83d4a 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -274,6 +274,7 @@
 CONFIG_HSI=m
 CONFIG_OMAP_SSI=m
 CONFIG_SSI_PROTOCOL=m
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c
index 6fdb0ac..59da6c0 100644
--- a/arch/arm/crypto/chacha-glue.c
+++ b/arch/arm/crypto/chacha-glue.c
@@ -91,9 +91,17 @@
 		return;
 	}
 
-	kernel_neon_begin();
-	chacha_doneon(state, dst, src, bytes, nrounds);
-	kernel_neon_end();
+	do {
+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
+
+		kernel_neon_begin();
+		chacha_doneon(state, dst, src, todo, nrounds);
+		kernel_neon_end();
+
+		bytes -= todo;
+		src += todo;
+		dst += todo;
+	} while (bytes);
 }
 EXPORT_SYMBOL(chacha_crypt_arch);
 
diff --git a/arch/arm/crypto/nhpoly1305-neon-glue.c b/arch/arm/crypto/nhpoly1305-neon-glue.c
index ae5aefc..ffa8d73 100644
--- a/arch/arm/crypto/nhpoly1305-neon-glue.c
+++ b/arch/arm/crypto/nhpoly1305-neon-glue.c
@@ -30,7 +30,7 @@
 		return crypto_nhpoly1305_update(desc, src, srclen);
 
 	do {
-		unsigned int n = min_t(unsigned int, srclen, PAGE_SIZE);
+		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
 
 		kernel_neon_begin();
 		crypto_nhpoly1305_update_helper(desc, src, n, _nh_neon);
diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c
index ceec04e..13cfef4 100644
--- a/arch/arm/crypto/poly1305-glue.c
+++ b/arch/arm/crypto/poly1305-glue.c
@@ -160,13 +160,20 @@
 		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
 
 		if (static_branch_likely(&have_neon) && do_neon) {
-			kernel_neon_begin();
-			poly1305_blocks_neon(&dctx->h, src, len, 1);
-			kernel_neon_end();
+			do {
+				unsigned int todo = min_t(unsigned int, len, SZ_4K);
+
+				kernel_neon_begin();
+				poly1305_blocks_neon(&dctx->h, src, todo, 1);
+				kernel_neon_end();
+
+				len -= todo;
+				src += todo;
+			} while (len);
 		} else {
 			poly1305_blocks_arm(&dctx->h, src, len, 1);
+			src += len;
 		}
-		src += len;
 		nbytes %= POLY1305_BLOCK_SIZE;
 	}
 
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index e133da3..a915188 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -165,8 +165,13 @@
 	preempt_enable();
 #endif
 
-	if (!ret)
-		*oval = oldval;
+	/*
+	 * Store unconditionally. If ret != 0 the extra store is the least
+	 * of the worries but GCC cannot figure out that __futex_atomic_op()
+	 * is either setting ret to -EFAULT or storing the old value in
+	 * oldval which results in a uninitialized warning at the call site.
+	 */
+	*oval = oldval;
 
 	return ret;
 }
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 182163b..4b0df09 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -37,30 +37,6 @@
 struct module;
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val);
 
-/*
- * Add the ARM architecture version to the version magic string
- */
-#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
-
-/* Add __virt_to_phys patching state as well */
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
-#else
-#define MODULE_ARCH_VERMAGIC_P2V ""
-#endif
-
-/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
-#ifdef CONFIG_THUMB2_KERNEL
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
-#else
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
-#endif
-
-#define MODULE_ARCH_VERMAGIC \
-	MODULE_ARCH_VERMAGIC_ARMVSN \
-	MODULE_ARCH_VERMAGIC_ARMTHUMB \
-	MODULE_ARCH_VERMAGIC_P2V
-
 #ifdef CONFIG_THUMB2_KERNEL
 #define HAVE_ARCH_KALLSYMS_SYMBOL_VALUE
 static inline unsigned long kallsyms_symbol_value(const Elf_Sym *sym)
diff --git a/arch/arm/include/asm/vermagic.h b/arch/arm/include/asm/vermagic.h
new file mode 100644
index 0000000..62ce94e
--- /dev/null
+++ b/arch/arm/include/asm/vermagic.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+
+/*
+ * Add the ARM architecture version to the version magic string
+ */
+#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+
+/* Add __virt_to_phys patching state as well */
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
+#else
+#define MODULE_ARCH_VERMAGIC_P2V ""
+#endif
+
+/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
+#ifdef CONFIG_THUMB2_KERNEL
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
+#else
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_ARCH_VERMAGIC_ARMVSN \
+	MODULE_ARCH_VERMAGIC_ARMTHUMB \
+	MODULE_ARCH_VERMAGIC_P2V
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 03506ce..e7364e6 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -91,8 +91,10 @@
 obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
 obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
+ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
 AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
+endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
 obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
diff --git a/arch/arm/mach-oxnas/platsmp.c b/arch/arm/mach-oxnas/platsmp.c
index ab35275..f0a50b9 100644
--- a/arch/arm/mach-oxnas/platsmp.c
+++ b/arch/arm/mach-oxnas/platsmp.c
@@ -27,7 +27,8 @@
 #define GIC_CPU_CTRL			0x00
 #define GIC_CPU_CTRL_ENABLE		1
 
-int __init ox820_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __init ox820_boot_secondary(unsigned int cpu,
+		struct task_struct *idle)
 {
 	/*
 	 * Write the address of secondary startup into the
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index cc29869..bf85d6d 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -929,7 +929,11 @@
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do LSR operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for LSR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_LSR, val), ctx);
@@ -955,7 +959,11 @@
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do ARSH operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for ASR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_ASR, val), ctx);
@@ -992,21 +1000,35 @@
 	arm_bpf_put_reg32(dst_hi, rd[0], ctx);
 }
 
+static bool is_ldst_imm(s16 off, const u8 size)
+{
+	s16 off_max = 0;
+
+	switch (size) {
+	case BPF_B:
+	case BPF_W:
+		off_max = 0xfff;
+		break;
+	case BPF_H:
+		off_max = 0xff;
+		break;
+	case BPF_DW:
+		/* Need to make sure off+4 does not overflow. */
+		off_max = 0xfff - 4;
+		break;
+	}
+	return -off_max <= off && off <= off_max;
+}
+
 /* *(size *)(dst + off) = src */
 static inline void emit_str_r(const s8 dst, const s8 src[],
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
-	s32 off_max;
 	s8 rd;
 
 	rd = arm_bpf_get_reg32(dst, tmp[1], ctx);
 
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
-
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], rd), ctx);
 		rd = tmp[0];
@@ -1035,18 +1057,12 @@
 
 /* dst = *(size*)(src + off) */
 static inline void emit_ldx_r(const s8 dst[], const s8 src,
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 	const s8 *rd = is_stacked(dst_lo) ? tmp : dst;
 	s8 rm = src;
-	s32 off_max;
 
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
-
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], src), ctx);
 		rm = tmp[0];
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index dd6804a..fd4e1ce1 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -36,7 +36,7 @@
 
 #include <linux/mm.h>
 
-struct start_info _xen_start_info;
+static struct start_info _xen_start_info;
 struct start_info *xen_start_info = &_xen_start_info;
 EXPORT_SYMBOL(xen_start_info);
 
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 40fb05d..5d513f4 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -20,6 +20,7 @@
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SETUP_DMA_OPS
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
index 316e8a4..dc4ab6b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -98,7 +98,7 @@
 };
 
 &codec_analog {
-	hpvcc-supply = <&reg_eldo1>;
+	cpvdd-supply = <&reg_eldo1>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 31143fe..c26cc1f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -154,24 +154,6 @@
 		};
 	};
 
-	sound_spdif {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "On-board SPDIF";
-
-		simple-audio-card,cpu {
-			sound-dai = <&spdif>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&spdif_out>;
-		};
-	};
-
-	spdif_out: spdif-out {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-	};
-
 	timer {
 		compatible = "arm,armv8-timer";
 		allwinner,erratum-unknown1;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 0882ea2..c0aef7d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2319,7 +2319,7 @@
 				reg = <0x0 0xff400000 0x0 0x40000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-				clock-names = "ddr";
+				clock-names = "otg";
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
 				dr_mode = "peripheral";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 783e5a3..55d3902 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -1,4 +1,3 @@
-
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2019 BayLibre, SAS
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index c33e85f..c6c8cae 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -154,6 +154,10 @@
 	clock-latency = <50000>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
 &frddr_b {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index 325e448..06c5430e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -545,7 +545,7 @@
 &usb {
 	status = "okay";
 	dr_mode = "host";
-	vbus-regulator = <&usb_pwr_en>;
+	vbus-supply = <&usb_pwr_en>;
 };
 
 &usb2_phy0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 2a7f70b..13d0570 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -447,7 +447,7 @@
 
 		edma0: dma-controller@22c0000 {
 			#dma-cells = <2>;
-			compatible = "fsl,ls1028a-edma";
+			compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
 			reg = <0x0 0x22c0000 0x0 0x10000>,
 			      <0x0 0x22d0000 0x0 0x10000>,
 			      <0x0 0x22e0000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index cc7152e..8829628 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -264,7 +264,7 @@
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -543,7 +543,7 @@
 
 		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x10000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -603,7 +603,7 @@
 
 		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x10000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -863,7 +863,7 @@
 
 		aips4: bus@32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x32df0000 0x10000>;
+			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index fa78f01..43971ab 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -241,7 +241,7 @@
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -448,7 +448,7 @@
 
 		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x10000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -508,7 +508,7 @@
 
 		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x10000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -718,7 +718,7 @@
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MN_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MN_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
@@ -754,7 +754,7 @@
 
 		aips4: bus@32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x32df0000 0x10000>;
+			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
index da78f89..319ab34 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -151,26 +151,26 @@
 #define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22                         0x070 0x2D0 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x074 0x2D4 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC              0x074 0x2D4 0x540 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03              0x074 0x2D4 0x4CC 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03              0x074 0x2D4 0x4CC 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24                         0x074 0x2D4 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2                       0x074 0x2D4 0x618 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23                      0x074 0x2D4 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x078 0x2D8 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER                        0x078 0x2D8 0x000 0x1 0x0
 #define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK                 0x078 0x2D8 0x53C 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02                 0x078 0x2D8 0x4C8 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02                 0x078 0x2D8 0x4C8 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25                            0x078 0x2D8 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3                          0x078 0x2D8 0x61C 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24                         0x078 0x2D8 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0                    0x07C 0x2DC 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00               0x07C 0x2DC 0x534 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01                 0x07C 0x2DC 0x4C4 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01                 0x07C 0x2DC 0x4C4 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26                            0x07C 0x2DC 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4                          0x07C 0x2DC 0x620 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25                         0x07C 0x2DC 0x000 0x7 0x0
 #define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1                    0x080 0x2E0 0x000 0x0 0x0
 #define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC                 0x080 0x2E0 0x538 0x2 0x0
-#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00                 0x080 0x2E0 0x4C0 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00                 0x080 0x2E0 0x4C0 0x3 0x1
 #define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27                            0x080 0x2E0 0x000 0x5 0x0
 #define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B                        0x080 0x2E0 0x000 0x6 0x0
 #define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26                         0x080 0x2E0 0x000 0x7 0x0
@@ -291,7 +291,7 @@
 #define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA                             0x0C8 0x328 0x5C0 0x2 0x1
 #define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX                         0x0C8 0x328 0x5F0 0x3 0x2
 #define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX                         0x0C8 0x328 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00                0x0C8 0x328 0x4C0 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00                0x0C8 0x328 0x4C0 0x4 0x2
 #define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15                           0x0C8 0x328 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                0x0C8 0x328 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02                    0x0C8 0x328 0x000 0x7 0x0
@@ -313,7 +313,7 @@
 #define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                         0x0D4 0x334 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO                          0x0D4 0x334 0x56C 0x2 0x0
 #define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN                    0x0D4 0x334 0x544 0x3 0x1
-#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03                0x0D4 0x334 0x4CC 0x4 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03                0x0D4 0x334 0x4CC 0x4 0x2
 #define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18                           0x0D4 0x334 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET             0x0D4 0x334 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B                     0x0D8 0x338 0x000 0x0 0x0
@@ -487,27 +487,27 @@
 #define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02              0x134 0x394 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT                             0x134 0x394 0x000 0x2 0x0
 #define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL                             0x134 0x394 0x5C4 0x3 0x1
-#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00                0x134 0x394 0x4C0 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00                0x134 0x394 0x4C0 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21                           0x134 0x394 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x138 0x398 0x4FC 0x0 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03              0x138 0x398 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC                0x138 0x398 0x4D8 0x2 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC                0x138 0x398 0x510 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01                0x138 0x398 0x4C4 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01                0x138 0x398 0x4C4 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22                           0x138 0x398 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX                              0x138 0x398 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x13C 0x39C 0x500 0x0 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04              0x13C 0x39C 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC                0x13C 0x39C 0x4D8 0x2 0x1
 #define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK                0x13C 0x39C 0x50C 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02                0x13C 0x39C 0x4C8 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02                0x13C 0x39C 0x4C8 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23                           0x13C 0x39C 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX                              0x13C 0x39C 0x54C 0x6 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x140 0x3A0 0x504 0x0 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05              0x140 0x3A0 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC                0x140 0x3A0 0x4D8 0x2 0x2
 #define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00              0x140 0x3A0 0x000 0x3 0x0
-#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03                0x140 0x3A0 0x4CC 0x4 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03                0x140 0x3A0 0x4CC 0x4 0x3
 #define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24                           0x140 0x3A0 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX                              0x140 0x3A0 0x000 0x6 0x0
 #define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK                   0x144 0x3A4 0x4F0 0x0 0x0
@@ -528,22 +528,22 @@
 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00              0x150 0x3B0 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x150 0x3B0 0x4F8 0x1 0x1
 #define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01              0x150 0x3B0 0x000 0x2 0x0
-#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00                0x150 0x3B0 0x4C0 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00                0x150 0x3B0 0x4C0 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN                 0x150 0x3B0 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02                           0x150 0x3B0 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01              0x154 0x3B4 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x154 0x3B4 0x4FC 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01                0x154 0x3B4 0x4C4 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01                0x154 0x3B4 0x4C4 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT                0x154 0x3B4 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03                           0x154 0x3B4 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02              0x158 0x3B8 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x158 0x3B8 0x500 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02                0x158 0x3B8 0x4C8 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02                0x158 0x3B8 0x4C8 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC                            0x158 0x3B8 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04                           0x158 0x3B8 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03              0x15C 0x3BC 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x15C 0x3BC 0x504 0x1 0x1
-#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03                0x15C 0x3BC 0x4CC 0x3 0x3
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03                0x15C 0x3BC 0x4CC 0x3 0x4
 #define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO                           0x15C 0x3BC 0x57C 0x4 0x1
 #define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05                           0x15C 0x3BC 0x000 0x5 0x0
 #define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04              0x160 0x3C0 0x000 0x0 0x0
@@ -624,7 +624,7 @@
 #define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX                         0x19C 0x3FC 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX                         0x19C 0x3FC 0x5E8 0x4 0x2
 #define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21                           0x19C 0x3FC 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02                0x19C 0x3FC 0x4C8 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02                0x19C 0x3FC 0x4C8 0x6 0x5
 #define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00                        0x19C 0x3FC 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK                 0x1A0 0x400 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK                 0x1A0 0x400 0x50C 0x1 0x2
@@ -632,7 +632,7 @@
 #define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX                          0x1A0 0x400 0x5E8 0x4 0x3
 #define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX                          0x1A0 0x400 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                            0x1A0 0x400 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01                 0x1A0 0x400 0x4C4 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01                 0x1A0 0x400 0x4C4 0x6 0x5
 #define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01                         0x1A0 0x400 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00              0x1A4 0x404 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00              0x1A4 0x404 0x000 0x1 0x0
@@ -641,7 +641,7 @@
 #define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS                        0x1A4 0x404 0x5E4 0x4 0x2
 #define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS                        0x1A4 0x404 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23                           0x1A4 0x404 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03                0x1A4 0x404 0x4CC 0x6 0x4
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03                0x1A4 0x404 0x4CC 0x6 0x5
 #define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02                        0x1A4 0x404 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC                0x1A8 0x408 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01              0x1A8 0x408 0x000 0x1 0x0
@@ -650,13 +650,13 @@
 #define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS                        0x1A8 0x408 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS                        0x1A8 0x408 0x5E4 0x4 0x3
 #define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24                           0x1A8 0x408 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02                0x1A8 0x408 0x4C8 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02                0x1A8 0x408 0x4C8 0x6 0x6
 #define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE                         0x1A8 0x408 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK                 0x1AC 0x40C 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02               0x1AC 0x40C 0x000 0x1 0x0
 #define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX                               0x1AC 0x40C 0x54C 0x3 0x1
 #define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25                            0x1AC 0x40C 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01                 0x1AC 0x40C 0x4C4 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01                 0x1AC 0x40C 0x4C4 0x6 0x6
 #define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT                       0x1AC 0x40C 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00              0x1B0 0x410 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03              0x1B0 0x410 0x000 0x1 0x0
@@ -680,7 +680,7 @@
 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01              0x1B8 0x418 0x000 0x3 0x0
 #define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN                    0x1B8 0x418 0x544 0x4 0x2
 #define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28                           0x1B8 0x418 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00                0x1B8 0x418 0x4C0 0x6 0x4
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00                0x1B8 0x418 0x4C0 0x6 0x5
 #define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00                       0x1B8 0x418 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK                 0x1BC 0x41C 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02               0x1BC 0x41C 0x000 0x1 0x0
@@ -697,7 +697,7 @@
 #define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS                         0x1C0 0x420 0x5EC 0x4 0x3
 #define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS                         0x1C0 0x420 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30                            0x1C0 0x420 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01                 0x1C0 0x420 0x4C4 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01                 0x1C0 0x420 0x4C4 0x6 0x7
 #define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00                         0x1C0 0x420 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC                0x1C4 0x424 0x4EC 0x0 0x1
 #define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1C4 0x424 0x000 0x1 0x0
@@ -706,7 +706,7 @@
 #define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX                         0x1C4 0x424 0x5F0 0x4 0x4
 #define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX                         0x1C4 0x424 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31                           0x1C4 0x424 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03                0x1C4 0x424 0x4CC 0x6 0x5
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03                0x1C4 0x424 0x4CC 0x6 0x6
 #define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01                        0x1C4 0x424 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK                 0x1C8 0x428 0x4E8 0x0 0x1
 #define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02               0x1C8 0x428 0x000 0x1 0x0
@@ -715,7 +715,7 @@
 #define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX                          0x1C8 0x428 0x000 0x4 0x0
 #define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX                          0x1C8 0x428 0x5F0 0x4 0x5
 #define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00                            0x1C8 0x428 0x000 0x5 0x0
-#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02                 0x1C8 0x428 0x4C8 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02                 0x1C8 0x428 0x4C8 0x6 0x7
 #define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02                         0x1C8 0x428 0x000 0x7 0x0
 #define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00               0x1CC 0x42C 0x000 0x0 0x0
 #define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03               0x1CC 0x42C 0x000 0x1 0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 9b1616e..9f6ba76 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -145,7 +145,7 @@
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -318,7 +318,7 @@
 
 		aips2: bus@30400000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x400000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -378,7 +378,7 @@
 
 		aips3: bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x400000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 75b3842..bab8836 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -291,7 +291,7 @@
 
 		bus@30000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x301f0000 0x10000>;
+			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -696,7 +696,7 @@
 
 		bus@30400000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x305f0000 0x10000>;
+			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -756,7 +756,7 @@
 
 		bus@30800000 { /* AIPS3 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x309f0000 0x10000>;
+			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -1029,7 +1029,7 @@
 
 		bus@32c00000 { /* AIPS4 */
 			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x32df0000 0x10000>;
+			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index af87350..c4abbcc 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -658,8 +658,8 @@
 	s11 {
 		qcom,saw-leader;
 		regulator-always-on;
-		regulator-min-microvolt = <1230000>;
-		regulator-max-microvolt = <1230000>;
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
 	};
 };
 
@@ -908,10 +908,27 @@
 	status = "okay";
 };
 
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "DB820c";
-	audio-routing =	"RX_BIAS", "MCLK";
+	audio-routing =	"RX_BIAS", "MCLK",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 14827ad..98634d5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2066,6 +2066,8 @@
 						reg = <APR_SVC_ASM>;
 						q6asmdai: dais {
 							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#sound-dai-cells = <1>;
 							iommus = <&lpass_q6_smmu 1>;
 						};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a2e0592..21fd6f8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -442,17 +442,14 @@
 &q6asmdai {
 	dai@0 {
 		reg = <0>;
-		direction = <2>;
 	};
 
 	dai@1 {
 		reg = <1>;
-		direction = <2>;
 	};
 
 	dai@2 {
 		reg = <2>;
-		direction = <1>;
 	};
 
 	dai@3 {
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 3b617a7..51a670a 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -359,12 +359,10 @@
 &q6asmdai {
 	dai@0 {
 		reg = <0>;
-		direction = <2>;
 	};
 
 	dai@1 {
 		reg = <1>;
-		direction = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 2afb91e..ac2156a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -137,8 +137,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index d7c7b91..01c4ba0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -150,8 +150,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 3dde028..ef8350a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -174,8 +174,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index adbfd8f..6dff046 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -141,8 +141,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index e01b050..d672b32 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1318,6 +1318,7 @@
 		ipmmu_vip0: mmu@e7b00000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7b00000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -1325,6 +1326,7 @@
 		ipmmu_vip1: mmu@e7960000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 11>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 4fd2b14..dc24cec4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -360,8 +360,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 67634cb..79c73a9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -272,8 +272,8 @@
 
 	hdmi-encoder@39 {
 		compatible = "adi,adv7511w";
-		reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
-		reg-names = "main", "edid", "packet", "cec";
+		reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
+		reg-names = "main", "edid", "cec", "packet";
 		interrupt-parent = <&gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 
@@ -284,8 +284,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index f809dd6..adc9b8b 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -143,7 +143,7 @@
 	};
 
 	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index ac43bc3..ac7f694 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -127,7 +127,7 @@
 	};
 
 	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 49c4b96..ac29c27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -82,17 +82,16 @@
 &gmac2phy {
 	phy-supply = <&vcc_phy>;
 	clock_in_out = "output";
-	assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
 	assigned-clock-rate = <50000000>;
 	assigned-clocks = <&cru SCLK_MAC2PHY>;
 	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
-
+	status = "okay";
 };
 
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index bf3e546..ebf3eb2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -170,7 +170,7 @@
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 7e88d88..a4d591d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -299,8 +299,6 @@
 	grf: syscon@ff100000 {
 		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff100000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		io_domains: io-domains {
 			compatible = "rockchip,rk3328-io-voltage-domain";
@@ -1794,10 +1792,6 @@
 		};
 
 		gmac2phy {
-			fephyled_speed100: fephyled-speed100 {
-				rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>;
-			};
-
 			fephyled_speed10: fephyled-speed10 {
 				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
 			};
@@ -1806,18 +1800,6 @@
 				rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
 			};
 
-			fephyled_rxm0: fephyled-rxm0 {
-				rockchip,pins = <0 RK_PD5 1 &pcfg_pull_none>;
-			};
-
-			fephyled_txm0: fephyled-txm0 {
-				rockchip,pins = <0 RK_PD5 2 &pcfg_pull_none>;
-			};
-
-			fephyled_linkm0: fephyled-linkm0 {
-				rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>;
-			};
-
 			fephyled_rxm1: fephyled-rxm1 {
 				rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
 			};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 5ea281b..c49982d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -147,7 +147,7 @@
 			"Speaker", "Speaker Amplifier OUTL",
 			"Speaker", "Speaker Amplifier OUTR";
 
-		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
 		simple-audio-card,aux-devs = <&speaker_amp>;
 		simple-audio-card,pin-switches = "Speaker";
 
@@ -690,7 +690,8 @@
 	fusb0: fusb30x@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
-		fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fusb0_int_gpio>;
 		vbus-supply = <&vbus_typec>;
@@ -788,13 +789,13 @@
 
 	dc-charger {
 		dc_det_gpio: dc-det-gpio {
-			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	es8316 {
 		hp_det_gpio: hp-det-gpio {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 74f2c3d..1448f35 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -403,7 +403,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_0: dwc3 {
+		usbdrd_dwc3_0: usb@fe800000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -439,7 +439,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_1: dwc3 {
+		usbdrd_dwc3_1: usb@fe900000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1124,8 +1124,6 @@
 	pmugrf: syscon@ff320000 {
 		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff320000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		pmu_io_domains: io-domains {
 			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
@@ -1883,10 +1881,10 @@
 	gpu: gpu@ff9a0000 {
 		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
 		reg = <0x0 0xff9a0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "gpu", "job", "mmu";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		#cooling-cells = <2>;
 		power-domains = <&power RK3399_PD_GPU>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 24e534d..03d0189 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -208,7 +208,7 @@
 CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCIE_KIRIN=y
 CONFIG_PCIE_HISI_STB=y
-CONFIG_PCIE_TEGRA194=m
+CONFIG_PCIE_TEGRA194_HOST=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER_USER_HELPER=y
@@ -567,6 +567,7 @@
 CONFIG_MEDIA_SDR_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 # CONFIG_DVB_NET is not set
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
@@ -610,8 +611,9 @@
 CONFIG_DRM_TEGRA=m
 CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_DRM_DUMB_VGA_DAC=m
+CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
+CONFIG_DRM_DISPLAY_CONNECTOR=m
 CONFIG_DRM_SII902X=m
 CONFIG_DRM_THINE_THC63LVD1024=m
 CONFIG_DRM_TI_SN65DSI86=m
@@ -848,7 +850,8 @@
 CONFIG_ARCH_R8A774A1=y
 CONFIG_ARCH_R8A774B1=y
 CONFIG_ARCH_R8A774C0=y
-CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A77950=y
+CONFIG_ARCH_R8A77951=y
 CONFIG_ARCH_R8A77960=y
 CONFIG_ARCH_R8A77961=y
 CONFIG_ARCH_R8A77965=y
diff --git a/arch/arm64/crypto/chacha-neon-glue.c b/arch/arm64/crypto/chacha-neon-glue.c
index 37ca3e8..af2bbca 100644
--- a/arch/arm64/crypto/chacha-neon-glue.c
+++ b/arch/arm64/crypto/chacha-neon-glue.c
@@ -87,9 +87,17 @@
 	    !crypto_simd_usable())
 		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
 
-	kernel_neon_begin();
-	chacha_doneon(state, dst, src, bytes, nrounds);
-	kernel_neon_end();
+	do {
+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
+
+		kernel_neon_begin();
+		chacha_doneon(state, dst, src, todo, nrounds);
+		kernel_neon_end();
+
+		bytes -= todo;
+		src += todo;
+		dst += todo;
+	} while (bytes);
 }
 EXPORT_SYMBOL(chacha_crypt_arch);
 
diff --git a/arch/arm64/crypto/nhpoly1305-neon-glue.c b/arch/arm64/crypto/nhpoly1305-neon-glue.c
index 895d372..c5405e6 100644
--- a/arch/arm64/crypto/nhpoly1305-neon-glue.c
+++ b/arch/arm64/crypto/nhpoly1305-neon-glue.c
@@ -30,7 +30,7 @@
 		return crypto_nhpoly1305_update(desc, src, srclen);
 
 	do {
-		unsigned int n = min_t(unsigned int, srclen, PAGE_SIZE);
+		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
 
 		kernel_neon_begin();
 		crypto_nhpoly1305_update_helper(desc, src, n, _nh_neon);
diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
index e97b092..f33ada7 100644
--- a/arch/arm64/crypto/poly1305-glue.c
+++ b/arch/arm64/crypto/poly1305-glue.c
@@ -143,13 +143,20 @@
 		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
 
 		if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
-			kernel_neon_begin();
-			poly1305_blocks_neon(&dctx->h, src, len, 1);
-			kernel_neon_end();
+			do {
+				unsigned int todo = min_t(unsigned int, len, SZ_4K);
+
+				kernel_neon_begin();
+				poly1305_blocks_neon(&dctx->h, src, todo, 1);
+				kernel_neon_end();
+
+				len -= todo;
+				src += todo;
+			} while (len);
 		} else {
 			poly1305_blocks(&dctx->h, src, len, 1);
+			src += len;
 		}
-		src += len;
 		nbytes %= POLY1305_BLOCK_SIZE;
 	}
 
diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h
index 1e93de6..4e7fa26 100644
--- a/arch/arm64/include/asm/module.h
+++ b/arch/arm64/include/asm/module.h
@@ -7,8 +7,6 @@
 
 #include <asm-generic/module.h>
 
-#define MODULE_ARCH_VERMAGIC	"aarch64"
-
 #ifdef CONFIG_ARM64_MODULE_PLTS
 struct mod_plt_sec {
 	int			plt_shndx;
diff --git a/arch/arm64/include/asm/pointer_auth.h b/arch/arm64/include/asm/pointer_auth.h
index 70c4715..c6b4f06 100644
--- a/arch/arm64/include/asm/pointer_auth.h
+++ b/arch/arm64/include/asm/pointer_auth.h
@@ -47,7 +47,7 @@
 		get_random_bytes(&keys->apga, sizeof(keys->apga));
 }
 
-#define __ptrauth_key_install(k, v)				\
+#define __ptrauth_key_install_nosync(k, v)			\
 do {								\
 	struct ptrauth_key __pki_v = (v);			\
 	write_sysreg_s(__pki_v.lo, SYS_ ## k ## KEYLO_EL1);	\
@@ -62,8 +62,11 @@
 
 static __always_inline void ptrauth_keys_switch_kernel(struct ptrauth_keys_kernel *keys)
 {
-	if (system_supports_address_auth())
-		__ptrauth_key_install(APIA, keys->apia);
+	if (!system_supports_address_auth())
+		return;
+
+	__ptrauth_key_install_nosync(APIA, keys->apia);
+	isb();
 }
 
 extern int ptrauth_prctl_reset_keys(struct task_struct *tsk, unsigned long arg);
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index ebc6224..c4ac0ac 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -49,7 +49,9 @@
 #ifndef CONFIG_BROKEN_GAS_INST
 
 #ifdef __ASSEMBLY__
-#define __emit_inst(x)			.inst (x)
+// The space separator is omitted so that __emit_inst(x) can be parsed as
+// either an assembler directive or an assembler macro argument.
+#define __emit_inst(x)			.inst(x)
 #else
 #define __emit_inst(x)			".inst " __stringify((x)) "\n\t"
 #endif
diff --git a/arch/arm64/include/asm/vermagic.h b/arch/arm64/include/asm/vermagic.h
new file mode 100644
index 0000000..a1eec6a
--- /dev/null
+++ b/arch/arm64/include/asm/vermagic.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC	"aarch64"
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index 8e9c924..a0b144c 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -177,6 +177,7 @@
 	 * the offline CPUs. Therefore, we must use the __* variant here.
 	 */
 	__flush_icache_range((uintptr_t)reboot_code_buffer,
+			     (uintptr_t)reboot_code_buffer +
 			     arm64_relocate_new_kernel_size);
 
 	/* Flush the kimage list and its buffers. */
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 354b11e..033a48f 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -260,18 +260,7 @@
 	if (ret)
 		return ret;
 
-	ret = aarch32_alloc_kuser_vdso_page();
-	if (ret) {
-		unsigned long c_vvar =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VVAR]);
-		unsigned long c_vdso =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VDSO]);
-
-		free_page(c_vvar);
-		free_page(c_vdso);
-	}
-
-	return ret;
+	return aarch32_alloc_kuser_vdso_page();
 }
 #else
 static int __aarch32_alloc_vdso_pages(void)
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index dd2514b..3862cad 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -32,7 +32,7 @@
 OBJECT_FILES_NON_STANDARD	:= y
 KCOV_INSTRUMENT			:= n
 
-CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny
+CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny -fasynchronous-unwind-tables
 
 ifneq ($(c-gettimeofday-y),)
   CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y)
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index 23ebe51..50a279d 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -200,6 +200,13 @@
 	}
 
 	memcpy((u32 *)regs + off, valp, KVM_REG_SIZE(reg->id));
+
+	if (*vcpu_cpsr(vcpu) & PSR_MODE32_BIT) {
+		int i;
+
+		for (i = 0; i < 16; i++)
+			*vcpu_reg32(vcpu, i) = (u32)*vcpu_reg32(vcpu, i);
+	}
 out:
 	return err;
 }
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
index d22d053..90186cf 100644
--- a/arch/arm64/kvm/hyp/entry.S
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -18,6 +18,7 @@
 
 #define CPU_GP_REG_OFFSET(x)	(CPU_GP_REGS + x)
 #define CPU_XREG_OFFSET(x)	CPU_GP_REG_OFFSET(CPU_USER_PT_REGS + 8*x)
+#define CPU_SP_EL0_OFFSET	(CPU_XREG_OFFSET(30) + 8)
 
 	.text
 	.pushsection	.hyp.text, "ax"
@@ -47,6 +48,16 @@
 	ldp	x29, lr,  [\ctxt, #CPU_XREG_OFFSET(29)]
 .endm
 
+.macro save_sp_el0 ctxt, tmp
+	mrs	\tmp,	sp_el0
+	str	\tmp,	[\ctxt, #CPU_SP_EL0_OFFSET]
+.endm
+
+.macro restore_sp_el0 ctxt, tmp
+	ldr	\tmp,	  [\ctxt, #CPU_SP_EL0_OFFSET]
+	msr	sp_el0, \tmp
+.endm
+
 /*
  * u64 __guest_enter(struct kvm_vcpu *vcpu,
  *		     struct kvm_cpu_context *host_ctxt);
@@ -60,6 +71,9 @@
 	// Store the host regs
 	save_callee_saved_regs x1
 
+	// Save the host's sp_el0
+	save_sp_el0	x1, x2
+
 	// Now the host state is stored if we have a pending RAS SError it must
 	// affect the host. If any asynchronous exception is pending we defer
 	// the guest entry. The DSB isn't necessary before v8.2 as any SError
@@ -83,6 +97,9 @@
 	// when this feature is enabled for kernel code.
 	ptrauth_switch_to_guest x29, x0, x1, x2
 
+	// Restore the guest's sp_el0
+	restore_sp_el0 x29, x0
+
 	// Restore guest regs x0-x17
 	ldp	x0, x1,   [x29, #CPU_XREG_OFFSET(0)]
 	ldp	x2, x3,   [x29, #CPU_XREG_OFFSET(2)]
@@ -130,6 +147,9 @@
 	// Store the guest regs x18-x29, lr
 	save_callee_saved_regs x1
 
+	// Store the guest's sp_el0
+	save_sp_el0	x1, x2
+
 	get_host_ctxt	x2, x3
 
 	// Macro ptrauth_switch_to_guest format:
@@ -139,6 +159,9 @@
 	// when this feature is enabled for kernel code.
 	ptrauth_switch_to_host x1, x2, x3, x4, x5
 
+	// Restore the hosts's sp_el0
+	restore_sp_el0 x2, x3
+
 	// Now restore the host regs
 	restore_callee_saved_regs x2
 
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
index c2a13ab..9c5cfb0 100644
--- a/arch/arm64/kvm/hyp/hyp-entry.S
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -198,7 +198,6 @@
 .macro invalid_vector	label, target = __hyp_panic
 	.align	2
 SYM_CODE_START(\label)
-\label:
 	b \target
 SYM_CODE_END(\label)
 .endm
diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c
index 75b1925..6d2df9f 100644
--- a/arch/arm64/kvm/hyp/sysreg-sr.c
+++ b/arch/arm64/kvm/hyp/sysreg-sr.c
@@ -15,8 +15,9 @@
 /*
  * Non-VHE: Both host and guest must save everything.
  *
- * VHE: Host and guest must save mdscr_el1 and sp_el0 (and the PC and pstate,
- * which are handled as part of the el2 return state) on every switch.
+ * VHE: Host and guest must save mdscr_el1 and sp_el0 (and the PC and
+ * pstate, which are handled as part of the el2 return state) on every
+ * switch (sp_el0 is being dealt with in the assembly code).
  * tpidr_el0 and tpidrro_el0 only need to be switched when going
  * to host userspace or a different VCPU.  EL1 registers only need to be
  * switched when potentially going to run a different VCPU.  The latter two
@@ -26,12 +27,6 @@
 static void __hyp_text __sysreg_save_common_state(struct kvm_cpu_context *ctxt)
 {
 	ctxt->sys_regs[MDSCR_EL1]	= read_sysreg(mdscr_el1);
-
-	/*
-	 * The host arm64 Linux uses sp_el0 to point to 'current' and it must
-	 * therefore be saved/restored on every entry/exit to/from the guest.
-	 */
-	ctxt->gp_regs.regs.sp		= read_sysreg(sp_el0);
 }
 
 static void __hyp_text __sysreg_save_user_state(struct kvm_cpu_context *ctxt)
@@ -99,12 +94,6 @@
 static void __hyp_text __sysreg_restore_common_state(struct kvm_cpu_context *ctxt)
 {
 	write_sysreg(ctxt->sys_regs[MDSCR_EL1],	  mdscr_el1);
-
-	/*
-	 * The host arm64 Linux uses sp_el0 to point to 'current' and it must
-	 * therefore be saved/restored on every entry/exit to/from the guest.
-	 */
-	write_sysreg(ctxt->gp_regs.regs.sp,	  sp_el0);
 }
 
 static void __hyp_text __sysreg_restore_user_state(struct kvm_cpu_context *ctxt)
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index bbeb6a5..0be3355 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -230,6 +230,8 @@
 		ptep = (pte_t *)pudp;
 	} else if (sz == (CONT_PTE_SIZE)) {
 		pmdp = pmd_alloc(mm, pudp, addr);
+		if (!pmdp)
+			return NULL;
 
 		WARN_ON(addr & (sz - 1));
 		/*
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 94545d5..bd31ab1 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -8,6 +8,7 @@
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_QUEUED_RWLOCKS if NR_CPUS>2
+	select ARCH_WANT_FRAME_POINTERS if !CPU_CK610
 	select COMMON_CLK
 	select CLKSRC_MMIO
 	select CSKY_MPINTC if CPU_CK860
@@ -38,6 +39,7 @@
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_COPY_THREAD_TLS
+	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_FUNCTION_TRACER
diff --git a/arch/csky/Makefile b/arch/csky/Makefile
index fb1bbbd..37f593a 100644
--- a/arch/csky/Makefile
+++ b/arch/csky/Makefile
@@ -47,7 +47,7 @@
 KBUILD_CFLAGS += -mno-stack-size
 endif
 
-ifdef CONFIG_STACKTRACE
+ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS += -mbacktrace
 endif
 
diff --git a/arch/csky/abiv1/inc/abi/entry.h b/arch/csky/abiv1/inc/abi/entry.h
index 5056ebb..61d94ec 100644
--- a/arch/csky/abiv1/inc/abi/entry.h
+++ b/arch/csky/abiv1/inc/abi/entry.h
@@ -167,8 +167,8 @@
 	 *   BA     Reserved  C   D   V
 	 */
 	cprcr	r6, cpcr30
-	lsri	r6, 28
-	lsli	r6, 28
+	lsri	r6, 29
+	lsli	r6, 29
 	addi	r6, 0xe
 	cpwcr	r6, cpcr30
 
diff --git a/arch/csky/abiv2/inc/abi/entry.h b/arch/csky/abiv2/inc/abi/entry.h
index a99aff5..ab63c41 100644
--- a/arch/csky/abiv2/inc/abi/entry.h
+++ b/arch/csky/abiv2/inc/abi/entry.h
@@ -285,8 +285,8 @@
 	 */
 	mfcr	r6, cr<30, 15> /* Get MSA0 */
 2:
-	lsri	r6, 28
-	lsli	r6, 28
+	lsri	r6, 29
+	lsli	r6, 29
 	addi	r6, 0x1ce
 	mtcr	r6, cr<30, 15> /* Set MSA0 */
 
diff --git a/arch/csky/abiv2/mcount.S b/arch/csky/abiv2/mcount.S
index 9331c7e..911512b 100644
--- a/arch/csky/abiv2/mcount.S
+++ b/arch/csky/abiv2/mcount.S
@@ -103,6 +103,8 @@
 	mov	a0, lr
 	subi	a0, 4
 	ldw	a1, (sp, 24)
+	lrw	a2, function_trace_op
+	ldw	a2, (a2, 0)
 
 	jsr	r26
 
diff --git a/arch/csky/include/asm/processor.h b/arch/csky/include/asm/processor.h
index c6bcd7f..24442d8 100644
--- a/arch/csky/include/asm/processor.h
+++ b/arch/csky/include/asm/processor.h
@@ -41,8 +41,7 @@
 #define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)
 
 struct thread_struct {
-	unsigned long  ksp;       /* kernel stack pointer */
-	unsigned long  sr;        /* saved status register */
+	unsigned long  sp;        /* kernel stack pointer */
 	unsigned long  trap_no;   /* saved status register */
 
 	/* FPU regs */
@@ -50,8 +49,7 @@
 };
 
 #define INIT_THREAD  { \
-	.ksp = sizeof(init_stack) + (unsigned long) &init_stack, \
-	.sr = DEFAULT_PSR_VALUE, \
+	.sp = sizeof(init_stack) + (unsigned long) &init_stack, \
 }
 
 /*
diff --git a/arch/csky/include/asm/ptrace.h b/arch/csky/include/asm/ptrace.h
index aae5aa9..bcfb707 100644
--- a/arch/csky/include/asm/ptrace.h
+++ b/arch/csky/include/asm/ptrace.h
@@ -58,6 +58,16 @@
 	return regs->usp;
 }
 
+static inline unsigned long frame_pointer(struct pt_regs *regs)
+{
+	return regs->regs[4];
+}
+static inline void frame_pointer_set(struct pt_regs *regs,
+				     unsigned long val)
+{
+	regs->regs[4] = val;
+}
+
 extern int regs_query_register_offset(const char *name);
 extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
 						unsigned int n);
diff --git a/arch/csky/include/asm/thread_info.h b/arch/csky/include/asm/thread_info.h
index 442feda..5c61e84 100644
--- a/arch/csky/include/asm/thread_info.h
+++ b/arch/csky/include/asm/thread_info.h
@@ -38,7 +38,13 @@
 #define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
 
 #define thread_saved_fp(tsk) \
-	((unsigned long)(((struct switch_stack *)(tsk->thread.ksp))->r8))
+	((unsigned long)(((struct switch_stack *)(tsk->thread.sp))->r8))
+
+#define thread_saved_sp(tsk) \
+	((unsigned long)(tsk->thread.sp))
+
+#define thread_saved_lr(tsk) \
+	((unsigned long)(((struct switch_stack *)(tsk->thread.sp))->r15))
 
 static inline struct thread_info *current_thread_info(void)
 {
@@ -54,10 +60,10 @@
 #define TIF_SIGPENDING		0	/* signal pending */
 #define TIF_NOTIFY_RESUME	1       /* callback before returning to user */
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_SYSCALL_TRACE	3	/* syscall trace active */
-#define TIF_SYSCALL_TRACEPOINT	4       /* syscall tracepoint instrumentation */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing */
-#define TIF_UPROBE		6	/* uprobe breakpoint or singlestep */
+#define TIF_UPROBE		3	/* uprobe breakpoint or singlestep */
+#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
+#define TIF_SYSCALL_TRACEPOINT	5       /* syscall tracepoint instrumentation */
+#define TIF_SYSCALL_AUDIT	6	/* syscall auditing */
 #define TIF_POLLING_NRFLAG	16	/* poll_idle() is TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18      /* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
diff --git a/arch/csky/include/asm/uaccess.h b/arch/csky/include/asm/uaccess.h
index abefa12..1633ffe 100644
--- a/arch/csky/include/asm/uaccess.h
+++ b/arch/csky/include/asm/uaccess.h
@@ -253,7 +253,7 @@
 
 extern int __get_user_bad(void);
 
-#define __copy_user(to, from, n)			\
+#define ___copy_to_user(to, from, n)			\
 do {							\
 	int w0, w1, w2, w3;				\
 	asm volatile(					\
@@ -288,31 +288,34 @@
 	"       subi    %0, 4           \n"		\
 	"       br      3b              \n"		\
 	"5:     cmpnei  %0, 0           \n"  /* 1B */   \
-	"       bf      8f              \n"		\
+	"       bf      13f             \n"		\
 	"       ldb     %3, (%2, 0)     \n"		\
 	"6:     stb     %3, (%1, 0)     \n"		\
 	"       addi    %2,  1          \n"		\
 	"       addi    %1,  1          \n"		\
 	"       subi    %0,  1          \n"		\
 	"       br      5b              \n"		\
-	"7:     br      8f              \n"		\
+	"7:     subi	%0,  4          \n"		\
+	"8:     subi	%0,  4          \n"		\
+	"12:    subi	%0,  4          \n"		\
+	"       br      13f             \n"		\
 	".section __ex_table, \"a\"     \n"		\
 	".align   2                     \n"		\
-	".long    2b, 7b                \n"		\
-	".long    9b, 7b                \n"		\
-	".long   10b, 7b                \n"		\
+	".long    2b, 13f               \n"		\
+	".long    4b, 13f               \n"		\
+	".long    6b, 13f               \n"		\
+	".long    9b, 12b               \n"		\
+	".long   10b, 8b                \n"		\
 	".long   11b, 7b                \n"		\
-	".long    4b, 7b                \n"		\
-	".long    6b, 7b                \n"		\
 	".previous                      \n"		\
-	"8:                             \n"		\
+	"13:                            \n"		\
 	: "=r"(n), "=r"(to), "=r"(from), "=r"(w0),	\
 	  "=r"(w1), "=r"(w2), "=r"(w3)			\
 	: "0"(n), "1"(to), "2"(from)			\
 	: "memory");					\
 } while (0)
 
-#define __copy_user_zeroing(to, from, n)		\
+#define ___copy_from_user(to, from, n)			\
 do {							\
 	int tmp;					\
 	int nsave;					\
@@ -355,22 +358,22 @@
 	"       addi    %1,  1          \n"		\
 	"       subi    %0,  1          \n"		\
 	"       br      5b              \n"		\
-	"8:     mov     %3, %0          \n"		\
-	"       movi    %4, 0           \n"		\
-	"9:     stb     %4, (%1, 0)     \n"		\
-	"       addi    %1, 1           \n"		\
-	"       subi    %3, 1           \n"		\
-	"       cmpnei  %3, 0           \n"		\
-	"       bt      9b              \n"		\
-	"       br      7f              \n"		\
+	"8:     stw     %3, (%1, 0)     \n"		\
+	"       subi    %0, 4           \n"		\
+	"       bf      7f              \n"		\
+	"9:     subi    %0, 8           \n"		\
+	"       bf      7f              \n"		\
+	"13:    stw     %3, (%1, 8)     \n"		\
+	"       subi    %0, 12          \n"		\
+	"       bf      7f              \n"		\
 	".section __ex_table, \"a\"     \n"		\
 	".align   2                     \n"		\
-	".long    2b, 8b                \n"		\
+	".long    2b, 7f                \n"		\
+	".long    4b, 7f                \n"		\
+	".long    6b, 7f                \n"		\
 	".long   10b, 8b                \n"		\
-	".long   11b, 8b                \n"		\
-	".long   12b, 8b                \n"		\
-	".long    4b, 8b                \n"		\
-	".long    6b, 8b                \n"		\
+	".long   11b, 9b                \n"		\
+	".long   12b,13b                \n"		\
 	".previous                      \n"		\
 	"7:                             \n"		\
 	: "=r"(n), "=r"(to), "=r"(from), "=r"(nsave),	\
diff --git a/arch/csky/kernel/Makefile b/arch/csky/kernel/Makefile
index fd6d9dc..37f37c0 100644
--- a/arch/csky/kernel/Makefile
+++ b/arch/csky/kernel/Makefile
@@ -3,7 +3,7 @@
 
 obj-y += entry.o atomic.o signal.o traps.o irq.o time.o vdso.o
 obj-y += power.o syscall.o syscall_table.o setup.o
-obj-y += process.o cpu-probe.o ptrace.o dumpstack.o
+obj-y += process.o cpu-probe.o ptrace.o stacktrace.o
 obj-y += probes/
 
 obj-$(CONFIG_MODULES)			+= module.o
diff --git a/arch/csky/kernel/asm-offsets.c b/arch/csky/kernel/asm-offsets.c
index f8be348..1747986 100644
--- a/arch/csky/kernel/asm-offsets.c
+++ b/arch/csky/kernel/asm-offsets.c
@@ -18,8 +18,7 @@
 	DEFINE(TASK_ACTIVE_MM,    offsetof(struct task_struct, active_mm));
 
 	/* offsets into the thread struct */
-	DEFINE(THREAD_KSP,        offsetof(struct thread_struct, ksp));
-	DEFINE(THREAD_SR,         offsetof(struct thread_struct, sr));
+	DEFINE(THREAD_KSP,        offsetof(struct thread_struct, sp));
 	DEFINE(THREAD_FESR,       offsetof(struct thread_struct, user_fp.fesr));
 	DEFINE(THREAD_FCR,        offsetof(struct thread_struct, user_fp.fcr));
 	DEFINE(THREAD_FPREG,      offsetof(struct thread_struct, user_fp.vr));
diff --git a/arch/csky/kernel/dumpstack.c b/arch/csky/kernel/dumpstack.c
deleted file mode 100644
index d67f977..0000000
--- a/arch/csky/kernel/dumpstack.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
-
-#include <linux/ptrace.h>
-
-int kstack_depth_to_print = 48;
-
-void show_trace(unsigned long *stack)
-{
-	unsigned long *stack_end;
-	unsigned long *stack_start;
-	unsigned long *fp;
-	unsigned long addr;
-
-	addr = (unsigned long) stack & THREAD_MASK;
-	stack_start = (unsigned long *) addr;
-	stack_end = (unsigned long *) (addr + THREAD_SIZE);
-
-	fp = stack;
-	pr_info("\nCall Trace:");
-
-	while (fp > stack_start && fp < stack_end) {
-#ifdef CONFIG_STACKTRACE
-		addr	= fp[1];
-		fp	= (unsigned long *) fp[0];
-#else
-		addr	= *fp++;
-#endif
-		if (__kernel_text_address(addr))
-			pr_cont("\n[<%08lx>] %pS", addr, (void *)addr);
-	}
-	pr_cont("\n");
-}
-
-void show_stack(struct task_struct *task, unsigned long *stack)
-{
-	if (!stack) {
-		if (task)
-			stack = (unsigned long *)thread_saved_fp(task);
-		else
-#ifdef CONFIG_STACKTRACE
-			asm volatile("mov %0, r8\n":"=r"(stack)::"memory");
-#else
-			stack = (unsigned long *)&stack;
-#endif
-	}
-
-	show_trace(stack);
-}
diff --git a/arch/csky/kernel/entry.S b/arch/csky/kernel/entry.S
index 36481953..3760397 100644
--- a/arch/csky/kernel/entry.S
+++ b/arch/csky/kernel/entry.S
@@ -330,11 +330,6 @@
 	lrw	a3, TASK_THREAD
 	addu	a3, a0
 
-	mfcr	a2, psr			/* Save PSR value */
-	stw	a2, (a3, THREAD_SR)	/* Save PSR in task struct */
-	bclri	a2, 6			/* Disable interrupts */
-	mtcr	a2, psr
-
 	SAVE_SWITCH_STACK
 
 	stw	sp, (a3, THREAD_KSP)
@@ -345,12 +340,9 @@
 
 	ldw	sp, (a3, THREAD_KSP)	/* Set next kernel sp */
 
-	ldw	a2, (a3, THREAD_SR)	/* Set next PSR */
-	mtcr	a2, psr
-
 #if  defined(__CSKYABIV2__)
-	addi	r7, a1, TASK_THREAD_INFO
-	ldw	tls, (r7, TINFO_TP_VALUE)
+	addi	a3, a1, TASK_THREAD_INFO
+	ldw	tls, (a3, TINFO_TP_VALUE)
 #endif
 
 	RESTORE_SWITCH_STACK
diff --git a/arch/csky/kernel/ftrace.c b/arch/csky/kernel/ftrace.c
index 44628e3..3c425b8 100644
--- a/arch/csky/kernel/ftrace.c
+++ b/arch/csky/kernel/ftrace.c
@@ -202,6 +202,7 @@
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
+#ifdef CONFIG_DYNAMIC_FTRACE
 #ifndef CONFIG_CPU_HAS_ICACHE_INS
 struct ftrace_modify_param {
 	int command;
@@ -231,6 +232,7 @@
 	stop_machine(__ftrace_modify_code, &param, cpu_online_mask);
 }
 #endif
+#endif /* CONFIG_DYNAMIC_FTRACE */
 
 /* _mcount is defined in abi's mcount.S */
 EXPORT_SYMBOL(_mcount);
diff --git a/arch/csky/kernel/perf_callchain.c b/arch/csky/kernel/perf_callchain.c
index e68ff37..ab55e98 100644
--- a/arch/csky/kernel/perf_callchain.c
+++ b/arch/csky/kernel/perf_callchain.c
@@ -12,12 +12,17 @@
 
 static int unwind_frame_kernel(struct stackframe *frame)
 {
-	if (kstack_end((void *)frame->fp))
+	unsigned long low = (unsigned long)task_stack_page(current);
+	unsigned long high = low + THREAD_SIZE;
+
+	if (unlikely(frame->fp < low || frame->fp > high))
 		return -EPERM;
-	if (frame->fp & 0x3 || frame->fp < TASK_SIZE)
+
+	if (kstack_end((void *)frame->fp) || frame->fp & 0x3)
 		return -EPERM;
 
 	*frame = *(struct stackframe *)frame->fp;
+
 	if (__kernel_text_address(frame->lr)) {
 		int graph = 0;
 
diff --git a/arch/csky/kernel/probes/uprobes.c b/arch/csky/kernel/probes/uprobes.c
index b3a56c2..1a9e096 100644
--- a/arch/csky/kernel/probes/uprobes.c
+++ b/arch/csky/kernel/probes/uprobes.c
@@ -11,6 +11,11 @@
 
 #define UPROBE_TRAP_NR	UINT_MAX
 
+bool is_swbp_insn(uprobe_opcode_t *insn)
+{
+	return (*insn & 0xffff) == UPROBE_SWBP_INSN;
+}
+
 unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
 {
 	return instruction_pointer(regs);
diff --git a/arch/csky/kernel/process.c b/arch/csky/kernel/process.c
index f7b231c..8b3fad0 100644
--- a/arch/csky/kernel/process.c
+++ b/arch/csky/kernel/process.c
@@ -35,7 +35,7 @@
  */
 unsigned long thread_saved_pc(struct task_struct *tsk)
 {
-	struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
+	struct switch_stack *sw = (struct switch_stack *)tsk->thread.sp;
 
 	return sw->r15;
 }
@@ -56,8 +56,8 @@
 	childstack = ((struct switch_stack *) childregs) - 1;
 	memset(childstack, 0, sizeof(struct switch_stack));
 
-	/* setup ksp for switch_to !!! */
-	p->thread.ksp = (unsigned long)childstack;
+	/* setup thread.sp for switch_to !!! */
+	p->thread.sp = (unsigned long)childstack;
 
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		memset(childregs, 0, sizeof(struct pt_regs));
@@ -98,37 +98,6 @@
 	return 1;
 }
 
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long lr;
-	unsigned long *fp, *stack_start, *stack_end;
-	int count = 0;
-
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	stack_start = (unsigned long *)end_of_stack(p);
-	stack_end = (unsigned long *)(task_stack_page(p) + THREAD_SIZE);
-
-	fp = (unsigned long *) thread_saved_fp(p);
-	do {
-		if (fp < stack_start || fp > stack_end)
-			return 0;
-#ifdef CONFIG_STACKTRACE
-		lr = fp[1];
-		fp = (unsigned long *)fp[0];
-#else
-		lr = *fp++;
-#endif
-		if (!in_sched_functions(lr) &&
-		    __kernel_text_address(lr))
-			return lr;
-	} while (count++ < 16);
-
-	return 0;
-}
-EXPORT_SYMBOL(get_wchan);
-
 #ifndef CONFIG_CPU_PM_NONE
 void arch_cpu_idle(void)
 {
diff --git a/arch/csky/kernel/ptrace.c b/arch/csky/kernel/ptrace.c
index 21ac260..5a82230 100644
--- a/arch/csky/kernel/ptrace.c
+++ b/arch/csky/kernel/ptrace.c
@@ -41,6 +41,9 @@
 
 	regs = task_pt_regs(tsk);
 	regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_RUN;
+
+	/* Enable irq */
+	regs->sr |= BIT(6);
 }
 
 static void singlestep_enable(struct task_struct *tsk)
@@ -49,6 +52,9 @@
 
 	regs = task_pt_regs(tsk);
 	regs->sr = (regs->sr & TRACE_MODE_MASK) | TRACE_MODE_SI;
+
+	/* Disable irq */
+	regs->sr &= ~BIT(6);
 }
 
 /*
diff --git a/arch/csky/kernel/stacktrace.c b/arch/csky/kernel/stacktrace.c
index fec777a..92809e1 100644
--- a/arch/csky/kernel/stacktrace.c
+++ b/arch/csky/kernel/stacktrace.c
@@ -1,57 +1,159 @@
 // SPDX-License-Identifier: GPL-2.0
-/* Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. */
 
 #include <linux/sched/debug.h>
 #include <linux/sched/task_stack.h>
 #include <linux/stacktrace.h>
 #include <linux/ftrace.h>
+#include <linux/ptrace.h>
+
+#ifdef CONFIG_FRAME_POINTER
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long ra;
+};
+
+void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
+			     bool (*fn)(unsigned long, void *), void *arg)
+{
+	unsigned long fp, sp, pc;
+
+	if (regs) {
+		fp = frame_pointer(regs);
+		sp = user_stack_pointer(regs);
+		pc = instruction_pointer(regs);
+	} else if (task == NULL || task == current) {
+		const register unsigned long current_sp __asm__ ("sp");
+		const register unsigned long current_fp __asm__ ("r8");
+		fp = current_fp;
+		sp = current_sp;
+		pc = (unsigned long)walk_stackframe;
+	} else {
+		/* task blocked in __switch_to */
+		fp = thread_saved_fp(task);
+		sp = thread_saved_sp(task);
+		pc = thread_saved_lr(task);
+	}
+
+	for (;;) {
+		unsigned long low, high;
+		struct stackframe *frame;
+
+		if (unlikely(!__kernel_text_address(pc) || fn(pc, arg)))
+			break;
+
+		/* Validate frame pointer */
+		low = sp;
+		high = ALIGN(sp, THREAD_SIZE);
+		if (unlikely(fp < low || fp > high || fp & 0x3))
+			break;
+		/* Unwind stack frame */
+		frame = (struct stackframe *)fp;
+		sp = fp;
+		fp = frame->fp;
+		pc = ftrace_graph_ret_addr(current, NULL, frame->ra,
+					   (unsigned long *)(fp - 8));
+	}
+}
+
+#else /* !CONFIG_FRAME_POINTER */
+
+static void notrace walk_stackframe(struct task_struct *task,
+	struct pt_regs *regs, bool (*fn)(unsigned long, void *), void *arg)
+{
+	unsigned long sp, pc;
+	unsigned long *ksp;
+
+	if (regs) {
+		sp = user_stack_pointer(regs);
+		pc = instruction_pointer(regs);
+	} else if (task == NULL || task == current) {
+		const register unsigned long current_sp __asm__ ("sp");
+		sp = current_sp;
+		pc = (unsigned long)walk_stackframe;
+	} else {
+		/* task blocked in __switch_to */
+		sp = thread_saved_sp(task);
+		pc = thread_saved_lr(task);
+	}
+
+	if (unlikely(sp & 0x3))
+		return;
+
+	ksp = (unsigned long *)sp;
+	while (!kstack_end(ksp)) {
+		if (__kernel_text_address(pc) && unlikely(fn(pc, arg)))
+			break;
+		pc = (*ksp++) - 0x4;
+	}
+}
+#endif /* CONFIG_FRAME_POINTER */
+
+static bool print_trace_address(unsigned long pc, void *arg)
+{
+	print_ip_sym(pc);
+	return false;
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	pr_cont("Call Trace:\n");
+	walk_stackframe(task, NULL, print_trace_address, NULL);
+}
+
+static bool save_wchan(unsigned long pc, void *arg)
+{
+	if (!in_sched_functions(pc)) {
+		unsigned long *p = arg;
+		*p = pc;
+		return true;
+	}
+	return false;
+}
+
+unsigned long get_wchan(struct task_struct *task)
+{
+	unsigned long pc = 0;
+
+	if (likely(task && task != current && task->state != TASK_RUNNING))
+		walk_stackframe(task, NULL, save_wchan, &pc);
+	return pc;
+}
+
+#ifdef CONFIG_STACKTRACE
+static bool __save_trace(unsigned long pc, void *arg, bool nosched)
+{
+	struct stack_trace *trace = arg;
+
+	if (unlikely(nosched && in_sched_functions(pc)))
+		return false;
+	if (unlikely(trace->skip > 0)) {
+		trace->skip--;
+		return false;
+	}
+
+	trace->entries[trace->nr_entries++] = pc;
+	return (trace->nr_entries >= trace->max_entries);
+}
+
+static bool save_trace(unsigned long pc, void *arg)
+{
+	return __save_trace(pc, arg, false);
+}
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	walk_stackframe(tsk, NULL, save_trace, trace);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
 
 void save_stack_trace(struct stack_trace *trace)
 {
-	save_stack_trace_tsk(current, trace);
+	save_stack_trace_tsk(NULL, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
-	unsigned long *fp, *stack_start, *stack_end;
-	unsigned long addr;
-	int skip = trace->skip;
-	int savesched;
-	int graph_idx = 0;
-
-	if (tsk == current) {
-		asm volatile("mov %0, r8\n":"=r"(fp));
-		savesched = 1;
-	} else {
-		fp = (unsigned long *)thread_saved_fp(tsk);
-		savesched = 0;
-	}
-
-	addr = (unsigned long) fp & THREAD_MASK;
-	stack_start = (unsigned long *) addr;
-	stack_end = (unsigned long *) (addr + THREAD_SIZE);
-
-	while (fp > stack_start && fp < stack_end) {
-		unsigned long lpp, fpp;
-
-		fpp = fp[0];
-		lpp = fp[1];
-		if (!__kernel_text_address(lpp))
-			break;
-		else
-			lpp = ftrace_graph_ret_addr(tsk, &graph_idx, lpp, NULL);
-
-		if (savesched || !in_sched_functions(lpp)) {
-			if (skip) {
-				skip--;
-			} else {
-				trace->entries[trace->nr_entries++] = lpp;
-				if (trace->nr_entries >= trace->max_entries)
-					break;
-			}
-		}
-		fp = (unsigned long *)fpp;
-	}
-}
-EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
+#endif /* CONFIG_STACKTRACE */
diff --git a/arch/csky/lib/usercopy.c b/arch/csky/lib/usercopy.c
index 647a239..3c9bd64 100644
--- a/arch/csky/lib/usercopy.c
+++ b/arch/csky/lib/usercopy.c
@@ -7,10 +7,7 @@
 unsigned long raw_copy_from_user(void *to, const void *from,
 			unsigned long n)
 {
-	if (access_ok(from, n))
-		__copy_user_zeroing(to, from, n);
-	else
-		memset(to, 0, n);
+	___copy_from_user(to, from, n);
 	return n;
 }
 EXPORT_SYMBOL(raw_copy_from_user);
@@ -18,8 +15,7 @@
 unsigned long raw_copy_to_user(void *to, const void *from,
 			unsigned long n)
 {
-	if (access_ok(to, n))
-		__copy_user(to, from, n);
+	___copy_to_user(to, from, n);
 	return n;
 }
 EXPORT_SYMBOL(raw_copy_to_user);
diff --git a/arch/h8300/kernel/.gitignore b/arch/h8300/kernel/.gitignore
new file mode 100644
index 0000000..bbb90f9
--- /dev/null
+++ b/arch/h8300/kernel/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds
diff --git a/arch/hexagon/include/asm/module.h b/arch/hexagon/include/asm/vermagic.h
similarity index 64%
rename from arch/hexagon/include/asm/module.h
rename to arch/hexagon/include/asm/vermagic.h
index e8de4fe..0e8dedc 100644
--- a/arch/hexagon/include/asm/module.h
+++ b/arch/hexagon/include/asm/vermagic.h
@@ -3,11 +3,11 @@
  * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  */
 
-#ifndef _ASM_MODULE_H
-#define _ASM_MODULE_H
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
 
-#include <asm-generic/module.h>
+#include <linux/stringify.h>
 
 #define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
 
-#endif
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/ia64/include/asm/module.h b/arch/ia64/include/asm/module.h
index f319144..5a29652 100644
--- a/arch/ia64/include/asm/module.h
+++ b/arch/ia64/include/asm/module.h
@@ -26,10 +26,6 @@
 	unsigned int next_got_entry;	/* index of next available got entry */
 };
 
-#define MODULE_PROC_FAMILY	"ia64"
-#define MODULE_ARCH_VERMAGIC	MODULE_PROC_FAMILY \
-	"gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
-
 #define ARCH_SHF_SMALL	SHF_IA_64_SHORT
 
 #endif /* _ASM_IA64_MODULE_H */
diff --git a/arch/ia64/include/asm/vermagic.h b/arch/ia64/include/asm/vermagic.h
new file mode 100644
index 0000000..29c7424
--- /dev/null
+++ b/arch/ia64/include/asm/vermagic.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+
+#define MODULE_ARCH_VERMAGIC	"ia64" \
+	"gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index a0765aa..1bff55a 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 generated-y += syscall_table.h
 generic-y += extable.h
-generic-y += hardirq.h
 generic-y += kvm_para.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 9846047..724a088 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -83,65 +83,4 @@
 }
 #endif
 
-#ifdef CONFIG_CPU_BMIPS
-#define MODULE_PROC_FAMILY "BMIPS "
-#elif defined CONFIG_CPU_MIPS32_R1
-#define MODULE_PROC_FAMILY "MIPS32_R1 "
-#elif defined CONFIG_CPU_MIPS32_R2
-#define MODULE_PROC_FAMILY "MIPS32_R2 "
-#elif defined CONFIG_CPU_MIPS32_R6
-#define MODULE_PROC_FAMILY "MIPS32_R6 "
-#elif defined CONFIG_CPU_MIPS64_R1
-#define MODULE_PROC_FAMILY "MIPS64_R1 "
-#elif defined CONFIG_CPU_MIPS64_R2
-#define MODULE_PROC_FAMILY "MIPS64_R2 "
-#elif defined CONFIG_CPU_MIPS64_R6
-#define MODULE_PROC_FAMILY "MIPS64_R6 "
-#elif defined CONFIG_CPU_R3000
-#define MODULE_PROC_FAMILY "R3000 "
-#elif defined CONFIG_CPU_TX39XX
-#define MODULE_PROC_FAMILY "TX39XX "
-#elif defined CONFIG_CPU_VR41XX
-#define MODULE_PROC_FAMILY "VR41XX "
-#elif defined CONFIG_CPU_R4X00
-#define MODULE_PROC_FAMILY "R4X00 "
-#elif defined CONFIG_CPU_TX49XX
-#define MODULE_PROC_FAMILY "TX49XX "
-#elif defined CONFIG_CPU_R5000
-#define MODULE_PROC_FAMILY "R5000 "
-#elif defined CONFIG_CPU_R5500
-#define MODULE_PROC_FAMILY "R5500 "
-#elif defined CONFIG_CPU_NEVADA
-#define MODULE_PROC_FAMILY "NEVADA "
-#elif defined CONFIG_CPU_R10000
-#define MODULE_PROC_FAMILY "R10000 "
-#elif defined CONFIG_CPU_RM7000
-#define MODULE_PROC_FAMILY "RM7000 "
-#elif defined CONFIG_CPU_SB1
-#define MODULE_PROC_FAMILY "SB1 "
-#elif defined CONFIG_CPU_LOONGSON32
-#define MODULE_PROC_FAMILY "LOONGSON32 "
-#elif defined CONFIG_CPU_LOONGSON2EF
-#define MODULE_PROC_FAMILY "LOONGSON2EF "
-#elif defined CONFIG_CPU_LOONGSON64
-#define MODULE_PROC_FAMILY "LOONGSON64 "
-#elif defined CONFIG_CPU_CAVIUM_OCTEON
-#define MODULE_PROC_FAMILY "OCTEON "
-#elif defined CONFIG_CPU_XLR
-#define MODULE_PROC_FAMILY "XLR "
-#elif defined CONFIG_CPU_XLP
-#define MODULE_PROC_FAMILY "XLP "
-#else
-#error MODULE_PROC_FAMILY undefined for your processor configuration
-#endif
-
-#ifdef CONFIG_32BIT
-#define MODULE_KERNEL_TYPE "32BIT "
-#elif defined CONFIG_64BIT
-#define MODULE_KERNEL_TYPE "64BIT "
-#endif
-
-#define MODULE_ARCH_VERMAGIC \
-	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
-
 #endif /* _ASM_MODULE_H */
diff --git a/arch/mips/include/asm/vermagic.h b/arch/mips/include/asm/vermagic.h
new file mode 100644
index 0000000..24dc3d3
--- /dev/null
+++ b/arch/mips/include/asm/vermagic.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_CPU_BMIPS
+#define MODULE_PROC_FAMILY "BMIPS "
+#elif defined CONFIG_CPU_MIPS32_R1
+#define MODULE_PROC_FAMILY "MIPS32_R1 "
+#elif defined CONFIG_CPU_MIPS32_R2
+#define MODULE_PROC_FAMILY "MIPS32_R2 "
+#elif defined CONFIG_CPU_MIPS32_R6
+#define MODULE_PROC_FAMILY "MIPS32_R6 "
+#elif defined CONFIG_CPU_MIPS64_R1
+#define MODULE_PROC_FAMILY "MIPS64_R1 "
+#elif defined CONFIG_CPU_MIPS64_R2
+#define MODULE_PROC_FAMILY "MIPS64_R2 "
+#elif defined CONFIG_CPU_MIPS64_R6
+#define MODULE_PROC_FAMILY "MIPS64_R6 "
+#elif defined CONFIG_CPU_R3000
+#define MODULE_PROC_FAMILY "R3000 "
+#elif defined CONFIG_CPU_TX39XX
+#define MODULE_PROC_FAMILY "TX39XX "
+#elif defined CONFIG_CPU_VR41XX
+#define MODULE_PROC_FAMILY "VR41XX "
+#elif defined CONFIG_CPU_R4X00
+#define MODULE_PROC_FAMILY "R4X00 "
+#elif defined CONFIG_CPU_TX49XX
+#define MODULE_PROC_FAMILY "TX49XX "
+#elif defined CONFIG_CPU_R5000
+#define MODULE_PROC_FAMILY "R5000 "
+#elif defined CONFIG_CPU_R5500
+#define MODULE_PROC_FAMILY "R5500 "
+#elif defined CONFIG_CPU_NEVADA
+#define MODULE_PROC_FAMILY "NEVADA "
+#elif defined CONFIG_CPU_R10000
+#define MODULE_PROC_FAMILY "R10000 "
+#elif defined CONFIG_CPU_RM7000
+#define MODULE_PROC_FAMILY "RM7000 "
+#elif defined CONFIG_CPU_SB1
+#define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_LOONGSON32
+#define MODULE_PROC_FAMILY "LOONGSON32 "
+#elif defined CONFIG_CPU_LOONGSON2EF
+#define MODULE_PROC_FAMILY "LOONGSON2EF "
+#elif defined CONFIG_CPU_LOONGSON64
+#define MODULE_PROC_FAMILY "LOONGSON64 "
+#elif defined CONFIG_CPU_CAVIUM_OCTEON
+#define MODULE_PROC_FAMILY "OCTEON "
+#elif defined CONFIG_CPU_XLR
+#define MODULE_PROC_FAMILY "XLR "
+#elif defined CONFIG_CPU_XLP
+#define MODULE_PROC_FAMILY "XLP "
+#else
+#error MODULE_PROC_FAMILY undefined for your processor configuration
+#endif
+
+#ifdef CONFIG_32BIT
+#define MODULE_KERNEL_TYPE "32BIT "
+#elif defined CONFIG_64BIT
+#define MODULE_KERNEL_TYPE "64BIT "
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/nds32/include/asm/module.h b/arch/nds32/include/asm/module.h
deleted file mode 100644
index a3a08e9..0000000
--- a/arch/nds32/include/asm/module.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASM_NDS32_MODULE_H
-#define _ASM_NDS32_MODULE_H
-
-#include <asm-generic/module.h>
-
-#define MODULE_ARCH_VERMAGIC	"NDS32v3"
-
-#endif /* _ASM_NDS32_MODULE_H */
diff --git a/arch/nds32/include/asm/vermagic.h b/arch/nds32/include/asm/vermagic.h
new file mode 100644
index 0000000..f772e7b
--- /dev/null
+++ b/arch/nds32/include/asm/vermagic.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+// Copyright (C) 2005-2017 Andes Technology Corporation
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC	"NDS32v3"
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/powerpc/include/asm/book3s/32/kup.h b/arch/powerpc/include/asm/book3s/32/kup.h
index 3c0ba22..db0a1c2 100644
--- a/arch/powerpc/include/asm/book3s/32/kup.h
+++ b/arch/powerpc/include/asm/book3s/32/kup.h
@@ -75,7 +75,7 @@
 
 .macro kuap_check	current, gpr
 #ifdef CONFIG_PPC_KUAP_DEBUG
-	lwz	\gpr2, KUAP(thread)
+	lwz	\gpr, KUAP(thread)
 999:	twnei	\gpr, 0
 	EMIT_BUG_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE)
 #endif
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index e0e7177..3a0db7b 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -250,9 +250,27 @@
 	}								\
 } while(0)
 
+static inline bool __lazy_irq_pending(u8 irq_happened)
+{
+	return !!(irq_happened & ~PACA_IRQ_HARD_DIS);
+}
+
+/*
+ * Check if a lazy IRQ is pending. Should be called with IRQs hard disabled.
+ */
 static inline bool lazy_irq_pending(void)
 {
-	return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS);
+	return __lazy_irq_pending(get_paca()->irq_happened);
+}
+
+/*
+ * Check if a lazy IRQ is pending, with no debugging checks.
+ * Should be called with IRQs hard disabled.
+ * For use in RI disabled code or other constrained situations.
+ */
+static inline bool lazy_irq_pending_nocheck(void)
+{
+	return __lazy_irq_pending(local_paca->irq_happened);
 }
 
 /*
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index 3566587..5398bfc 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -3,28 +3,10 @@
 #define _ASM_POWERPC_MODULE_H
 #ifdef __KERNEL__
 
-/*
- */
-
 #include <linux/list.h>
 #include <asm/bug.h>
 #include <asm-generic/module.h>
 
-
-#ifdef CONFIG_MPROFILE_KERNEL
-#define MODULE_ARCH_VERMAGIC_FTRACE	"mprofile-kernel "
-#else
-#define MODULE_ARCH_VERMAGIC_FTRACE	""
-#endif
-
-#ifdef CONFIG_RELOCATABLE
-#define MODULE_ARCH_VERMAGIC_RELOCATABLE	"relocatable "
-#else
-#define MODULE_ARCH_VERMAGIC_RELOCATABLE	""
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_ARCH_VERMAGIC_FTRACE MODULE_ARCH_VERMAGIC_RELOCATABLE
-
 #ifndef __powerpc64__
 /*
  * Thanks to Paul M for explaining this.
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 2f500de..0969285 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -166,13 +166,17 @@
 ({								\
 	long __pu_err;						\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = (x);			\
+	__typeof__(size) __pu_size = (size);			\
+								\
 	if (!is_kernel_addr((unsigned long)__pu_addr))		\
 		might_fault();					\
-	__chk_user_ptr(ptr);					\
+	__chk_user_ptr(__pu_addr);				\
 	if (do_allow)								\
-		__put_user_size((x), __pu_addr, (size), __pu_err);		\
+		__put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err);	\
 	else									\
-		__put_user_size_allowed((x), __pu_addr, (size), __pu_err);	\
+		__put_user_size_allowed(__pu_val, __pu_addr, __pu_size, __pu_err); \
+								\
 	__pu_err;						\
 })
 
@@ -180,9 +184,13 @@
 ({									\
 	long __pu_err = -EFAULT;					\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	__typeof__(size) __pu_size = (size);				\
+									\
 	might_fault();							\
-	if (access_ok(__pu_addr, size))			\
-		__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	if (access_ok(__pu_addr, __pu_size))				\
+		__put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
+									\
 	__pu_err;							\
 })
 
@@ -190,8 +198,12 @@
 ({								\
 	long __pu_err;						\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	__chk_user_ptr(ptr);					\
-	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__typeof__(*(ptr)) __pu_val = (x);			\
+	__typeof__(size) __pu_size = (size);			\
+								\
+	__chk_user_ptr(__pu_addr);				\
+	__put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
+								\
 	__pu_err;						\
 })
 
@@ -283,15 +295,18 @@
 	long __gu_err;						\
 	__long_type(*(ptr)) __gu_val;				\
 	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
+	__typeof__(size) __gu_size = (size);			\
+								\
+	__chk_user_ptr(__gu_addr);				\
 	if (!is_kernel_addr((unsigned long)__gu_addr))		\
 		might_fault();					\
 	barrier_nospec();					\
 	if (do_allow)								\
-		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);		\
+		__get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err);	\
 	else									\
-		__get_user_size_allowed(__gu_val, __gu_addr, (size), __gu_err);	\
+		__get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
 	(x) = (__typeof__(*(ptr)))__gu_val;			\
+								\
 	__gu_err;						\
 })
 
@@ -300,12 +315,15 @@
 	long __gu_err = -EFAULT;					\
 	__long_type(*(ptr)) __gu_val = 0;				\
 	__typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	__typeof__(size) __gu_size = (size);				\
+									\
 	might_fault();							\
-	if (access_ok(__gu_addr, (size))) {		\
+	if (access_ok(__gu_addr, __gu_size)) {				\
 		barrier_nospec();					\
-		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+		__get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
 	}								\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;				\
+									\
 	__gu_err;							\
 })
 
@@ -314,10 +332,13 @@
 	long __gu_err;						\
 	__long_type(*(ptr)) __gu_val;				\
 	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
+	__typeof__(size) __gu_size = (size);			\
+								\
+	__chk_user_ptr(__gu_addr);				\
 	barrier_nospec();					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	__get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
+								\
 	__gu_err;						\
 })
 
diff --git a/arch/powerpc/include/asm/vermagic.h b/arch/powerpc/include/asm/vermagic.h
new file mode 100644
index 0000000..b054a85
--- /dev/null
+++ b/arch/powerpc/include/asm/vermagic.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_MPROFILE_KERNEL
+#define MODULE_ARCH_VERMAGIC_FTRACE	"mprofile-kernel "
+#else
+#define MODULE_ARCH_VERMAGIC_FTRACE	""
+#endif
+
+#ifdef CONFIG_RELOCATABLE
+#define MODULE_ARCH_VERMAGIC_RELOCATABLE	"relocatable "
+#else
+#define MODULE_ARCH_VERMAGIC_RELOCATABLE	""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+		MODULE_ARCH_VERMAGIC_FTRACE MODULE_ARCH_VERMAGIC_RELOCATABLE
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index a6371fb..8420abd 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -732,7 +732,7 @@
 	stw	r10,_CCR(r1)
 	stw	r1,KSP(r3)	/* Set old stack pointer */
 
-	kuap_check r2, r4
+	kuap_check r2, r0
 #ifdef CONFIG_SMP
 	/* We need a sync somewhere here to make sure that if the
 	 * previous task gets rescheduled on another CPU, it sees all
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 9a1e5d6..b3c9f15 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -472,15 +472,17 @@
 #ifdef CONFIG_PPC_BOOK3S
 	/*
 	 * If MSR EE/RI was never enabled, IRQs not reconciled, NVGPRs not
-	 * touched, AMR not set, no exit work created, then this can be used.
+	 * touched, no exit work created, then this can be used.
 	 */
 	.balign IFETCH_ALIGN_BYTES
 	.globl fast_interrupt_return
 fast_interrupt_return:
 _ASM_NOKPROBE_SYMBOL(fast_interrupt_return)
+	kuap_check_amr r3, r4
 	ld	r4,_MSR(r1)
 	andi.	r0,r4,MSR_PR
 	bne	.Lfast_user_interrupt_return
+	kuap_restore_amr r3
 	andi.	r0,r4,MSR_RI
 	li	r3,0 /* 0 return value, no EMULATE_STACK_STORE */
 	bne+	.Lfast_kernel_interrupt_return
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 728ccb0..b0ad930 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -971,6 +971,7 @@
 	ld	r10,SOFTE(r1)
 	stb	r10,PACAIRQSOFTMASK(r13)
 
+	kuap_restore_amr r10
 	EXCEPTION_RESTORE_REGS
 	RFI_TO_USER_OR_KERNEL
 
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 9bb6639..2cec543 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -344,8 +344,9 @@
 /* 0x0C00 - System Call Exception */
 	START_EXCEPTION(0x0C00,	SystemCall)
 	SYSCALL_ENTRY	0xc00
+/*	Trap_0D is commented out to get more space for system call exception */
 
-	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD)
+/*	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD) */
 	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_STD)
 	EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_STD)
 
diff --git a/arch/powerpc/kernel/ima_arch.c b/arch/powerpc/kernel/ima_arch.c
index e341162..957abd5 100644
--- a/arch/powerpc/kernel/ima_arch.c
+++ b/arch/powerpc/kernel/ima_arch.c
@@ -19,12 +19,12 @@
  * to be stored as an xattr or as an appended signature.
  *
  * To avoid duplicate signature verification as much as possible, the IMA
- * policy rule for module appraisal is added only if CONFIG_MODULE_SIG_FORCE
+ * policy rule for module appraisal is added only if CONFIG_MODULE_SIG
  * is not enabled.
  */
 static const char *const secure_rules[] = {
 	"appraise func=KEXEC_KERNEL_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig",
-#ifndef CONFIG_MODULE_SIG_FORCE
+#ifndef CONFIG_MODULE_SIG
 	"appraise func=MODULE_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig",
 #endif
 	NULL
@@ -50,7 +50,7 @@
 	"measure func=KEXEC_KERNEL_CHECK template=ima-modsig",
 	"measure func=MODULE_CHECK template=ima-modsig",
 	"appraise func=KEXEC_KERNEL_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig",
-#ifndef CONFIG_MODULE_SIG_FORCE
+#ifndef CONFIG_MODULE_SIG
 	"appraise func=MODULE_CHECK appraise_flag=check_blacklist appraise_type=imasig|modsig",
 #endif
 	NULL
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 438a9be..8105010 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -534,6 +534,8 @@
 	lsizep = of_get_property(np, propnames[3], NULL);
 	if (bsizep == NULL)
 		bsizep = lsizep;
+	if (lsizep == NULL)
+		lsizep = bsizep;
 	if (lsizep != NULL)
 		lsize = be32_to_cpu(*lsizep);
 	if (bsizep != NULL)
diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
index c74295a..7b7c89c 100644
--- a/arch/powerpc/kernel/syscall_64.c
+++ b/arch/powerpc/kernel/syscall_64.c
@@ -35,6 +35,8 @@
 	BUG_ON(!FULL_REGS(regs));
 	BUG_ON(regs->softe != IRQS_ENABLED);
 
+	kuap_check_amr();
+
 	account_cpu_user_entry();
 
 #ifdef CONFIG_PPC_SPLPAR
@@ -47,8 +49,6 @@
 	}
 #endif
 
-	kuap_check_amr();
-
 	/*
 	 * This is not required for the syscall exit path, but makes the
 	 * stack frame look nicer. If this was initialised in the first stack
@@ -117,6 +117,8 @@
 	unsigned long ti_flags;
 	unsigned long ret = 0;
 
+	kuap_check_amr();
+
 	regs->result = r3;
 
 	/* Check whether the syscall is issued inside a restartable sequence */
@@ -189,7 +191,7 @@
 
 	/* This pattern matches prep_irq_for_idle */
 	__hard_EE_RI_disable();
-	if (unlikely(lazy_irq_pending())) {
+	if (unlikely(lazy_irq_pending_nocheck())) {
 		__hard_RI_enable();
 		trace_hardirqs_off();
 		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
@@ -204,8 +206,6 @@
 	local_paca->tm_scratch = regs->msr;
 #endif
 
-	kuap_check_amr();
-
 	account_cpu_user_exit();
 
 	return ret;
@@ -228,6 +228,8 @@
 	BUG_ON(!FULL_REGS(regs));
 	BUG_ON(regs->softe != IRQS_ENABLED);
 
+	kuap_check_amr();
+
 	local_irq_save(flags);
 
 again:
@@ -264,7 +266,7 @@
 
 	trace_hardirqs_on();
 	__hard_EE_RI_disable();
-	if (unlikely(lazy_irq_pending())) {
+	if (unlikely(lazy_irq_pending_nocheck())) {
 		__hard_RI_enable();
 		trace_hardirqs_off();
 		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
@@ -292,8 +294,6 @@
 	local_paca->tm_scratch = regs->msr;
 #endif
 
-	kuap_check_amr();
-
 	account_cpu_user_exit();
 
 	return ret;
@@ -313,6 +313,8 @@
 	BUG_ON(regs->msr & MSR_PR);
 	BUG_ON(!FULL_REGS(regs));
 
+	kuap_check_amr();
+
 	if (unlikely(*ti_flagsp & _TIF_EMULATE_STACK_STORE)) {
 		clear_bits(_TIF_EMULATE_STACK_STORE, ti_flagsp);
 		ret = 1;
@@ -334,7 +336,7 @@
 
 		trace_hardirqs_on();
 		__hard_EE_RI_disable();
-		if (unlikely(lazy_irq_pending())) {
+		if (unlikely(lazy_irq_pending_nocheck())) {
 			__hard_RI_enable();
 			irq_soft_mask_set(IRQS_ALL_DISABLED);
 			trace_hardirqs_off();
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index a395156..e7f8f9f1 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -218,11 +218,11 @@
 	blr
 
 	/*
-	 * invalid clock
+	 * syscall fallback
 	 */
 99:
-	li	r3, EINVAL
-	crset	so
+	li	r0,__NR_clock_getres
+	sc
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_clock_getres)
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 6404df6..2b35f9b 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -604,18 +604,19 @@
 	 */
 	local_irq_disable();
 	ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
+	pte = __pte(0);
+	if (ptep)
+		pte = *ptep;
+	local_irq_enable();
 	/*
 	 * If the PTE disappeared temporarily due to a THP
 	 * collapse, just return and let the guest try again.
 	 */
-	if (!ptep) {
-		local_irq_enable();
+	if (!pte_present(pte)) {
 		if (page)
 			put_page(page);
 		return RESUME_GUEST;
 	}
-	pte = *ptep;
-	local_irq_enable();
 	hpa = pte_pfn(pte) << PAGE_SHIFT;
 	pte_size = PAGE_SIZE;
 	if (shift)
diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c
index 9f05006..aa12cd4 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c
@@ -815,18 +815,19 @@
 	 */
 	local_irq_disable();
 	ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
+	pte = __pte(0);
+	if (ptep)
+		pte = *ptep;
+	local_irq_enable();
 	/*
 	 * If the PTE disappeared temporarily due to a THP
 	 * collapse, just return and let the guest try again.
 	 */
-	if (!ptep) {
-		local_irq_enable();
+	if (!pte_present(pte)) {
 		if (page)
 			put_page(page);
 		return RESUME_GUEST;
 	}
-	pte = *ptep;
-	local_irq_enable();
 
 	/* If we're logging dirty pages, always map single pages */
 	large_enable = !(memslot->flags & KVM_MEM_LOG_DIRTY_PAGES);
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index e15166b..ad2f172 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -521,6 +521,7 @@
 	case KVM_CAP_IOEVENTFD:
 	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_IMMEDIATE_EXIT:
+	case KVM_CAP_SET_GUEST_DEBUG:
 		r = 1;
 		break;
 	case KVM_CAP_PPC_GUEST_DEBUG_SSTEP:
diff --git a/arch/powerpc/mm/nohash/8xx.c b/arch/powerpc/mm/nohash/8xx.c
index 3189308..d83a12c 100644
--- a/arch/powerpc/mm/nohash/8xx.c
+++ b/arch/powerpc/mm/nohash/8xx.c
@@ -185,6 +185,7 @@
 			mmu_mapin_ram_chunk(etext8, einittext8, PAGE_KERNEL);
 		}
 	}
+	_tlbil_all();
 }
 
 #ifdef CONFIG_STRICT_KERNEL_RWX
@@ -199,6 +200,8 @@
 				      ~(LARGE_PAGE_SIZE_8M - 1)));
 	mmu_patch_addis(&patch__dtlbmiss_romem_top, -__pa(_sinittext));
 
+	_tlbil_all();
+
 	/* Update page tables for PTDUMP and BDI */
 	mmu_mapin_ram_chunk(0, sinittext, __pgprot(0));
 	mmu_mapin_ram_chunk(0, etext, PAGE_KERNEL_ROX);
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 0c3c190..27a81c2 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -397,7 +397,7 @@
 
 config PPC_KUAP_DEBUG
 	bool "Extra debugging for Kernel Userspace Access Protection"
-	depends on PPC_KUAP && (PPC_RADIX_MMU || PPC_32)
+	depends on PPC_KUAP && (PPC_RADIX_MMU || PPC32)
 	help
 	  Add extra debugging for Kernel Userspace Access Protection (KUAP)
 	  If you're unsure, say N.
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index a197258..a31e1a4 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -54,13 +54,13 @@
 	select GENERIC_ARCH_TOPOLOGY if SMP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_MMIOWB
-	select ARCH_HAS_DEBUG_VIRTUAL
-	select HAVE_EBPF_JIT
+	select ARCH_HAS_DEBUG_VIRTUAL if MMU
+	select HAVE_EBPF_JIT if MMU
 	select EDAC_SUPPORT
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
-	select ARCH_HAS_STRICT_KERNEL_RWX
+	select ARCH_HAS_STRICT_KERNEL_RWX if MMU
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
 	select SPARSEMEM_STATIC if 32BIT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
@@ -136,6 +136,7 @@
 	def_bool y
 
 config SYS_SUPPORTS_HUGETLBFS
+	depends on MMU
 	def_bool y
 
 config STACKTRACE_SUPPORT
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 216286d..d646332 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -11,14 +11,15 @@
 	  This enables support for SiFive SoC platform hardware.
 
 config SOC_VIRT
-       bool "QEMU Virt Machine"
-       select POWER_RESET_SYSCON
-       select POWER_RESET_SYSCON_POWEROFF
-       select GOLDFISH
-       select RTC_DRV_GOLDFISH
-       select SIFIVE_PLIC
-       help
-         This enables support for QEMU Virt Machine.
+	bool "QEMU Virt Machine"
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	select POWER_RESET_SYSCON_POWEROFF
+	select GOLDFISH
+	select RTC_DRV_GOLDFISH if RTC_CLASS
+	select SIFIVE_PLIC
+	help
+	  This enables support for QEMU Virt Machine.
 
 config SOC_KENDRYTE
 	bool "Kendryte K210 SoC"
diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index 8e18d2c..cec462e 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -51,13 +51,10 @@
 #define CAUSE_IRQ_FLAG		(_AC(1, UL) << (__riscv_xlen - 1))
 
 /* Interrupt causes (minus the high bit) */
-#define IRQ_U_SOFT		0
 #define IRQ_S_SOFT		1
 #define IRQ_M_SOFT		3
-#define IRQ_U_TIMER		4
 #define IRQ_S_TIMER		5
 #define IRQ_M_TIMER		7
-#define IRQ_U_EXT		8
 #define IRQ_S_EXT		9
 #define IRQ_M_EXT		11
 
diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
index 1bb0cd0..5ce5046 100644
--- a/arch/riscv/include/asm/hwcap.h
+++ b/arch/riscv/include/asm/hwcap.h
@@ -8,6 +8,7 @@
 #ifndef _ASM_RISCV_HWCAP_H
 #define _ASM_RISCV_HWCAP_H
 
+#include <linux/bits.h>
 #include <uapi/asm/hwcap.h>
 
 #ifndef __ASSEMBLY__
@@ -22,6 +23,27 @@
 };
 
 extern unsigned long elf_hwcap;
+
+#define RISCV_ISA_EXT_a		('a' - 'a')
+#define RISCV_ISA_EXT_c		('c' - 'a')
+#define RISCV_ISA_EXT_d		('d' - 'a')
+#define RISCV_ISA_EXT_f		('f' - 'a')
+#define RISCV_ISA_EXT_h		('h' - 'a')
+#define RISCV_ISA_EXT_i		('i' - 'a')
+#define RISCV_ISA_EXT_m		('m' - 'a')
+#define RISCV_ISA_EXT_s		('s' - 'a')
+#define RISCV_ISA_EXT_u		('u' - 'a')
+
+#define RISCV_ISA_EXT_MAX	64
+
+unsigned long riscv_isa_extension_base(const unsigned long *isa_bitmap);
+
+#define riscv_isa_extension_mask(ext) BIT_MASK(RISCV_ISA_EXT_##ext)
+
+bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit);
+#define riscv_isa_extension_available(isa_bitmap, ext)	\
+	__riscv_isa_extension_available(isa_bitmap, RISCV_ISA_EXT_##ext)
+
 #endif
 
 #endif /* _ASM_RISCV_HWCAP_H */
diff --git a/arch/riscv/include/asm/mmio.h b/arch/riscv/include/asm/mmio.h
index a2c809d..56053c9 100644
--- a/arch/riscv/include/asm/mmio.h
+++ b/arch/riscv/include/asm/mmio.h
@@ -16,6 +16,8 @@
 
 #ifndef CONFIG_MMU
 #define pgprot_noncached(x)	(x)
+#define pgprot_writecombine(x)	(x)
+#define pgprot_device(x)	(x)
 #endif /* CONFIG_MMU */
 
 /* Generic IO read/write.  These perform native-endian accesses. */
diff --git a/arch/riscv/include/asm/mmiowb.h b/arch/riscv/include/asm/mmiowb.h
index bb4091f..0b2333e7 100644
--- a/arch/riscv/include/asm/mmiowb.h
+++ b/arch/riscv/include/asm/mmiowb.h
@@ -9,6 +9,7 @@
  */
 #define mmiowb()	__asm__ __volatile__ ("fence o,w" : : : "memory");
 
+#include <linux/smp.h>
 #include <asm-generic/mmiowb.h>
 
 #endif	/* _ASM_RISCV_MMIOWB_H */
diff --git a/arch/riscv/include/asm/module.h b/arch/riscv/include/asm/module.h
index 46202da..76aa96a 100644
--- a/arch/riscv/include/asm/module.h
+++ b/arch/riscv/include/asm/module.h
@@ -6,8 +6,6 @@
 
 #include <asm-generic/module.h>
 
-#define MODULE_ARCH_VERMAGIC    "riscv"
-
 struct module;
 unsigned long module_emit_got_entry(struct module *mod, unsigned long val);
 unsigned long module_emit_plt_entry(struct module *mod, unsigned long val);
diff --git a/arch/riscv/include/asm/perf_event.h b/arch/riscv/include/asm/perf_event.h
index 0234048..062efd3 100644
--- a/arch/riscv/include/asm/perf_event.h
+++ b/arch/riscv/include/asm/perf_event.h
@@ -12,19 +12,14 @@
 #include <linux/ptrace.h>
 #include <linux/interrupt.h>
 
+#ifdef CONFIG_RISCV_BASE_PMU
 #define RISCV_BASE_COUNTERS	2
 
 /*
  * The RISCV_MAX_COUNTERS parameter should be specified.
  */
 
-#ifdef CONFIG_RISCV_BASE_PMU
 #define RISCV_MAX_COUNTERS	2
-#endif
-
-#ifndef RISCV_MAX_COUNTERS
-#error "Please provide a valid RISCV_MAX_COUNTERS for the PMU."
-#endif
 
 /*
  * These are the indexes of bits in counteren register *minus* 1,
@@ -82,6 +77,7 @@
 	int		irq;
 };
 
+#endif
 #ifdef CONFIG_PERF_EVENTS
 #define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs
 #endif
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 9c188ad..35b6003 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -470,12 +470,15 @@
 
 #else /* CONFIG_MMU */
 
+#define PAGE_SHARED		__pgprot(0)
 #define PAGE_KERNEL		__pgprot(0)
 #define swapper_pg_dir		NULL
 #define VMALLOC_START		0
 
 #define TASK_SIZE 0xffffffffUL
 
+static inline void __kernel_map_pages(struct page *page, int numpages, int enable) {}
+
 #endif /* !CONFIG_MMU */
 
 #define kern_addr_valid(addr)   (1) /* FIXME */
diff --git a/arch/riscv/include/asm/set_memory.h b/arch/riscv/include/asm/set_memory.h
index c38df47..4c5bae7 100644
--- a/arch/riscv/include/asm/set_memory.h
+++ b/arch/riscv/include/asm/set_memory.h
@@ -22,14 +22,6 @@
 static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
 #endif
 
-#ifdef CONFIG_STRICT_KERNEL_RWX
-void set_kernel_text_ro(void);
-void set_kernel_text_rw(void);
-#else
-static inline void set_kernel_text_ro(void) { }
-static inline void set_kernel_text_rw(void) { }
-#endif
-
 int set_direct_map_invalid_noflush(struct page *page);
 int set_direct_map_default_noflush(struct page *page);
 
diff --git a/arch/riscv/include/asm/vermagic.h b/arch/riscv/include/asm/vermagic.h
new file mode 100644
index 0000000..7b9441a
--- /dev/null
+++ b/arch/riscv/include/asm/vermagic.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2017 Andes Technology Corporation */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC    "riscv"
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 86c83081..d8bbd32 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -43,7 +43,7 @@
 obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= mcount-dyn.o
 
-obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
+obj-$(CONFIG_RISCV_BASE_PMU)	+= perf_event.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
 obj-$(CONFIG_RISCV_SBI)		+= sbi.o
diff --git a/arch/riscv/kernel/cpu_ops.c b/arch/riscv/kernel/cpu_ops.c
index c4c33bf..0ec2235 100644
--- a/arch/riscv/kernel/cpu_ops.c
+++ b/arch/riscv/kernel/cpu_ops.c
@@ -15,8 +15,8 @@
 
 const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init;
 
-void *__cpu_up_stack_pointer[NR_CPUS];
-void *__cpu_up_task_pointer[NR_CPUS];
+void *__cpu_up_stack_pointer[NR_CPUS] __section(.data);
+void *__cpu_up_task_pointer[NR_CPUS] __section(.data);
 
 extern const struct cpu_operations cpu_ops_sbi;
 extern const struct cpu_operations cpu_ops_spinwait;
diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
index a5ad000..ac202f4 100644
--- a/arch/riscv/kernel/cpufeature.c
+++ b/arch/riscv/kernel/cpufeature.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2017 SiFive
  */
 
+#include <linux/bitmap.h>
 #include <linux/of.h>
 #include <asm/processor.h>
 #include <asm/hwcap.h>
@@ -13,15 +14,57 @@
 #include <asm/switch_to.h>
 
 unsigned long elf_hwcap __read_mostly;
+
+/* Host ISA bitmap */
+static DECLARE_BITMAP(riscv_isa, RISCV_ISA_EXT_MAX) __read_mostly;
+
 #ifdef CONFIG_FPU
 bool has_fpu __read_mostly;
 #endif
 
+/**
+ * riscv_isa_extension_base() - Get base extension word
+ *
+ * @isa_bitmap: ISA bitmap to use
+ * Return: base extension word as unsigned long value
+ *
+ * NOTE: If isa_bitmap is NULL then Host ISA bitmap will be used.
+ */
+unsigned long riscv_isa_extension_base(const unsigned long *isa_bitmap)
+{
+	if (!isa_bitmap)
+		return riscv_isa[0];
+	return isa_bitmap[0];
+}
+EXPORT_SYMBOL_GPL(riscv_isa_extension_base);
+
+/**
+ * __riscv_isa_extension_available() - Check whether given extension
+ * is available or not
+ *
+ * @isa_bitmap: ISA bitmap to use
+ * @bit: bit position of the desired extension
+ * Return: true or false
+ *
+ * NOTE: If isa_bitmap is NULL then Host ISA bitmap will be used.
+ */
+bool __riscv_isa_extension_available(const unsigned long *isa_bitmap, int bit)
+{
+	const unsigned long *bmap = (isa_bitmap) ? isa_bitmap : riscv_isa;
+
+	if (bit >= RISCV_ISA_EXT_MAX)
+		return false;
+
+	return test_bit(bit, bmap) ? true : false;
+}
+EXPORT_SYMBOL_GPL(__riscv_isa_extension_available);
+
 void riscv_fill_hwcap(void)
 {
 	struct device_node *node;
 	const char *isa;
-	size_t i;
+	char print_str[BITS_PER_LONG + 1];
+	size_t i, j, isa_len;
 	static unsigned long isa2hwcap[256] = {0};
 
 	isa2hwcap['i'] = isa2hwcap['I'] = COMPAT_HWCAP_ISA_I;
@@ -33,8 +76,11 @@
 
 	elf_hwcap = 0;
 
+	bitmap_zero(riscv_isa, RISCV_ISA_EXT_MAX);
+
 	for_each_of_cpu_node(node) {
 		unsigned long this_hwcap = 0;
+		unsigned long this_isa = 0;
 
 		if (riscv_of_processor_hartid(node) < 0)
 			continue;
@@ -44,8 +90,24 @@
 			continue;
 		}
 
-		for (i = 0; i < strlen(isa); ++i)
+		i = 0;
+		isa_len = strlen(isa);
+#if IS_ENABLED(CONFIG_32BIT)
+		if (!strncmp(isa, "rv32", 4))
+			i += 4;
+#elif IS_ENABLED(CONFIG_64BIT)
+		if (!strncmp(isa, "rv64", 4))
+			i += 4;
+#endif
+		for (; i < isa_len; ++i) {
 			this_hwcap |= isa2hwcap[(unsigned char)(isa[i])];
+			/*
+			 * TODO: X, Y and Z extension parsing for Host ISA
+			 * bitmap will be added in-future.
+			 */
+			if ('a' <= isa[i] && isa[i] < 'x')
+				this_isa |= (1UL << (isa[i] - 'a'));
+		}
 
 		/*
 		 * All "okay" hart should have same isa. Set HWCAP based on
@@ -56,6 +118,11 @@
 			elf_hwcap &= this_hwcap;
 		else
 			elf_hwcap = this_hwcap;
+
+		if (riscv_isa[0])
+			riscv_isa[0] &= this_isa;
+		else
+			riscv_isa[0] = this_isa;
 	}
 
 	/* We don't support systems with F but without D, so mask those out
@@ -65,7 +132,17 @@
 		elf_hwcap &= ~COMPAT_HWCAP_ISA_F;
 	}
 
-	pr_info("elf_hwcap is 0x%lx\n", elf_hwcap);
+	memset(print_str, 0, sizeof(print_str));
+	for (i = 0, j = 0; i < BITS_PER_LONG; i++)
+		if (riscv_isa[0] & BIT_MASK(i))
+			print_str[j++] = (char)('a' + i);
+	pr_info("riscv: ISA extensions %s\n", print_str);
+
+	memset(print_str, 0, sizeof(print_str));
+	for (i = 0, j = 0; i < BITS_PER_LONG; i++)
+		if (elf_hwcap & BIT_MASK(i))
+			print_str[j++] = (char)('a' + i);
+	pr_info("riscv: ELF capabilities %s\n", print_str);
 
 #ifdef CONFIG_FPU
 	if (elf_hwcap & (COMPAT_HWCAP_ISA_F | COMPAT_HWCAP_ISA_D))
diff --git a/arch/riscv/kernel/perf_event.c b/arch/riscv/kernel/perf_event.c
index 91626d9..c835f03 100644
--- a/arch/riscv/kernel/perf_event.c
+++ b/arch/riscv/kernel/perf_event.c
@@ -147,7 +147,7 @@
 	return riscv_pmu->hw_events[config];
 }
 
-int riscv_map_cache_decode(u64 config, unsigned int *type,
+static int riscv_map_cache_decode(u64 config, unsigned int *type,
 			   unsigned int *op, unsigned int *result)
 {
 	return -ENOENT;
@@ -342,7 +342,7 @@
 
 static DEFINE_MUTEX(pmc_reserve_mutex);
 
-irqreturn_t riscv_base_pmu_handle_irq(int irq_num, void *dev)
+static irqreturn_t riscv_base_pmu_handle_irq(int irq_num, void *dev)
 {
 	return IRQ_NONE;
 }
@@ -361,7 +361,7 @@
 	return err;
 }
 
-void release_pmc_hardware(void)
+static void release_pmc_hardware(void)
 {
 	mutex_lock(&pmc_reserve_mutex);
 	if (riscv_pmu->irq >= 0)
@@ -464,7 +464,7 @@
 	{ /* sentinel value */ }
 };
 
-int __init init_hw_perf_events(void)
+static int __init init_hw_perf_events(void)
 {
 	struct device_node *node = of_find_node_by_type(NULL, "pmu");
 	const struct of_device_id *of_id;
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 7c24da59..f383ef56 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -102,7 +102,7 @@
 {
 	sbi_ecall(SBI_EXT_0_1_SHUTDOWN, 0, 0, 0, 0, 0, 0, 0);
 }
-EXPORT_SYMBOL(sbi_set_timer);
+EXPORT_SYMBOL(sbi_shutdown);
 
 /**
  * sbi_clear_ipi() - Clear any pending IPIs for the calling hart.
@@ -113,7 +113,7 @@
 {
 	sbi_ecall(SBI_EXT_0_1_CLEAR_IPI, 0, 0, 0, 0, 0, 0, 0);
 }
-EXPORT_SYMBOL(sbi_shutdown);
+EXPORT_SYMBOL(sbi_clear_ipi);
 
 /**
  * sbi_set_timer_v01() - Program the timer for next timer event.
@@ -167,6 +167,11 @@
 
 	return result;
 }
+
+static void sbi_set_power_off(void)
+{
+	pm_power_off = sbi_shutdown;
+}
 #else
 static void __sbi_set_timer_v01(uint64_t stime_value)
 {
@@ -191,6 +196,8 @@
 
 	return 0;
 }
+
+static void sbi_set_power_off(void) {}
 #endif /* CONFIG_RISCV_SBI_V01 */
 
 static void __sbi_set_timer_v02(uint64_t stime_value)
@@ -540,16 +547,12 @@
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_VERSION);
 }
 
-static void sbi_power_off(void)
-{
-	sbi_shutdown();
-}
 
 int __init sbi_init(void)
 {
 	int ret;
 
-	pm_power_off = sbi_power_off;
+	sbi_set_power_off();
 	ret = sbi_get_spec_version();
 	if (ret > 0)
 		sbi_spec_version = ret;
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index e0a6293..a65a8fa 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -10,6 +10,7 @@
 
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/profile.h>
 #include <linux/smp.h>
 #include <linux/sched.h>
@@ -63,6 +64,7 @@
 	for_each_cpu(cpu, in)
 		cpumask_set_cpu(cpuid_to_hartid_map(cpu), out);
 }
+EXPORT_SYMBOL_GPL(riscv_cpuid_to_hartid_mask);
 
 bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
 {
diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c
index 02087fe..837b9b3 100644
--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@@ -12,6 +12,8 @@
 #include <linux/stacktrace.h>
 #include <linux/ftrace.h>
 
+register unsigned long sp_in_global __asm__("sp");
+
 #ifdef CONFIG_FRAME_POINTER
 
 struct stackframe {
@@ -19,8 +21,6 @@
 	unsigned long ra;
 };
 
-register unsigned long sp_in_global __asm__("sp");
-
 void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 			     bool (*fn)(unsigned long, void *), void *arg)
 {
@@ -65,7 +65,7 @@
 
 #else /* !CONFIG_FRAME_POINTER */
 
-static void notrace walk_stackframe(struct task_struct *task,
+void notrace walk_stackframe(struct task_struct *task,
 	struct pt_regs *regs, bool (*fn)(unsigned long, void *), void *arg)
 {
 	unsigned long sp, pc;
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 33b16f4..4c8b2a4 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -12,7 +12,7 @@
 vdso-syms += flush_icache
 
 # Files to link into the vdso
-obj-vdso = $(patsubst %, %.o, $(vdso-syms))
+obj-vdso = $(patsubst %, %.o, $(vdso-syms)) note.o
 
 # Build rules
 targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds vdso-dummy.o
@@ -33,15 +33,15 @@
 	$(call if_changed,vdsold)
 
 # We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO.  With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
+# table and layout of the linked DSO. With ld --just-symbols we can then
+# refer to these symbols in the kernel code rather than hand-coded addresses.
 
 SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
 	-Wl,--build-id -Wl,--hash-style=both
 $(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE
 	$(call if_changed,vdsold)
 
-LDFLAGS_vdso-syms.o := -r -R
+LDFLAGS_vdso-syms.o := -r --just-symbols
 $(obj)/vdso-syms.o: $(obj)/vdso-dummy.o FORCE
 	$(call if_changed,ld)
 
diff --git a/arch/riscv/kernel/vdso/note.S b/arch/riscv/kernel/vdso/note.S
new file mode 100644
index 0000000..2a956c9
--- /dev/null
+++ b/arch/riscv/kernel/vdso/note.S
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/elfnote.h>
+#include <linux/version.h>
+
+ELFNOTE_START(Linux, 0, "a")
+	.long LINUX_VERSION_CODE
+ELFNOTE_END
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index b55be44..27a3341 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -150,7 +150,8 @@
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
 
 	set_max_mapnr(PFN_DOWN(mem_size));
-	max_low_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	max_low_pfn = max_pfn;
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	setup_initrd();
@@ -501,22 +502,6 @@
 #endif /* CONFIG_MMU */
 
 #ifdef CONFIG_STRICT_KERNEL_RWX
-void set_kernel_text_rw(void)
-{
-	unsigned long text_start = (unsigned long)_text;
-	unsigned long text_end = (unsigned long)_etext;
-
-	set_memory_rw(text_start, (text_end - text_start) >> PAGE_SHIFT);
-}
-
-void set_kernel_text_ro(void)
-{
-	unsigned long text_start = (unsigned long)_text;
-	unsigned long text_end = (unsigned long)_etext;
-
-	set_memory_ro(text_start, (text_end - text_start) >> PAGE_SHIFT);
-}
-
 void mark_rodata_ro(void)
 {
 	unsigned long text_start = (unsigned long)_text;
diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c
index cc1985d..d208a9f 100644
--- a/arch/riscv/net/bpf_jit_comp64.c
+++ b/arch/riscv/net/bpf_jit_comp64.c
@@ -110,6 +110,16 @@
 	return -(1L << 31) <= val && val < (1L << 31);
 }
 
+static bool in_auipc_jalr_range(s64 val)
+{
+	/*
+	 * auipc+jalr can reach any signed PC-relative offset in the range
+	 * [-2^31 - 2^11, 2^31 - 2^11).
+	 */
+	return (-(1L << 31) - (1L << 11)) <= val &&
+		val < ((1L << 31) - (1L << 11));
+}
+
 static void emit_imm(u8 rd, s64 val, struct rv_jit_context *ctx)
 {
 	/* Note that the immediate from the add is sign-extended,
@@ -380,20 +390,24 @@
 	*rd = RV_REG_T2;
 }
 
-static void emit_jump_and_link(u8 rd, s64 rvoff, bool force_jalr,
-			       struct rv_jit_context *ctx)
+static int emit_jump_and_link(u8 rd, s64 rvoff, bool force_jalr,
+			      struct rv_jit_context *ctx)
 {
 	s64 upper, lower;
 
 	if (rvoff && is_21b_int(rvoff) && !force_jalr) {
 		emit(rv_jal(rd, rvoff >> 1), ctx);
-		return;
+		return 0;
+	} else if (in_auipc_jalr_range(rvoff)) {
+		upper = (rvoff + (1 << 11)) >> 12;
+		lower = rvoff & 0xfff;
+		emit(rv_auipc(RV_REG_T1, upper), ctx);
+		emit(rv_jalr(rd, RV_REG_T1, lower), ctx);
+		return 0;
 	}
 
-	upper = (rvoff + (1 << 11)) >> 12;
-	lower = rvoff & 0xfff;
-	emit(rv_auipc(RV_REG_T1, upper), ctx);
-	emit(rv_jalr(rd, RV_REG_T1, lower), ctx);
+	pr_err("bpf-jit: target offset 0x%llx is out of range\n", rvoff);
+	return -ERANGE;
 }
 
 static bool is_signed_bpf_cond(u8 cond)
@@ -407,18 +421,16 @@
 	s64 off = 0;
 	u64 ip;
 	u8 rd;
+	int ret;
 
 	if (addr && ctx->insns) {
 		ip = (u64)(long)(ctx->insns + ctx->ninsns);
 		off = addr - ip;
-		if (!is_32b_int(off)) {
-			pr_err("bpf-jit: target call addr %pK is out of range\n",
-			       (void *)addr);
-			return -ERANGE;
-		}
 	}
 
-	emit_jump_and_link(RV_REG_RA, off, !fixed, ctx);
+	ret = emit_jump_and_link(RV_REG_RA, off, !fixed, ctx);
+	if (ret)
+		return ret;
 	rd = bpf_to_rv_reg(BPF_REG_0, ctx);
 	emit(rv_addi(rd, RV_REG_A0, 0), ctx);
 	return 0;
@@ -429,7 +441,7 @@
 {
 	bool is64 = BPF_CLASS(insn->code) == BPF_ALU64 ||
 		    BPF_CLASS(insn->code) == BPF_JMP;
-	int s, e, rvoff, i = insn - ctx->prog->insnsi;
+	int s, e, rvoff, ret, i = insn - ctx->prog->insnsi;
 	struct bpf_prog_aux *aux = ctx->prog->aux;
 	u8 rd = -1, rs = -1, code = insn->code;
 	s16 off = insn->off;
@@ -699,7 +711,9 @@
 	/* JUMP off */
 	case BPF_JMP | BPF_JA:
 		rvoff = rv_offset(i, off, ctx);
-		emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		ret = emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		if (ret)
+			return ret;
 		break;
 
 	/* IF (dst COND src) JUMP off */
@@ -801,7 +815,6 @@
 	case BPF_JMP | BPF_CALL:
 	{
 		bool fixed;
-		int ret;
 		u64 addr;
 
 		mark_call(ctx);
@@ -826,7 +839,9 @@
 			break;
 
 		rvoff = epilogue_offset(ctx);
-		emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		ret = emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		if (ret)
+			return ret;
 		break;
 
 	/* dst = imm64 */
diff --git a/arch/s390/boot/uv.c b/arch/s390/boot/uv.c
index 8fde561..f887a47 100644
--- a/arch/s390/boot/uv.c
+++ b/arch/s390/boot/uv.c
@@ -7,9 +7,7 @@
 #ifdef CONFIG_PROTECTED_VIRTUALIZATION_GUEST
 int __bootdata_preserved(prot_virt_guest);
 #endif
-#if IS_ENABLED(CONFIG_KVM)
 struct uv_info __bootdata_preserved(uv_info);
-#endif
 
 void uv_query_info(void)
 {
diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c
index 61f2b04..ccba63a 100644
--- a/arch/s390/kernel/diag.c
+++ b/arch/s390/kernel/diag.c
@@ -133,7 +133,7 @@
 }
 EXPORT_SYMBOL(diag_stat_inc);
 
-void diag_stat_inc_norecursion(enum diag_stat_enum nr)
+void notrace diag_stat_inc_norecursion(enum diag_stat_enum nr)
 {
 	this_cpu_inc(diag_stat.counter[nr]);
 	trace_s390_diagnose_norecursion(diag_map[nr].code);
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 7eaabba..10dbb12 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -403,7 +403,7 @@
 	return -1;
 }
 
-bool arch_vcpu_is_preempted(int cpu)
+bool notrace arch_vcpu_is_preempted(int cpu)
 {
 	if (test_cpu_flag_of(CIF_ENABLED_WAIT, cpu))
 		return false;
@@ -413,7 +413,7 @@
 }
 EXPORT_SYMBOL(arch_vcpu_is_preempted);
 
-void smp_yield_cpu(int cpu)
+void notrace smp_yield_cpu(int cpu)
 {
 	if (!MACHINE_HAS_DIAG9C)
 		return;
diff --git a/arch/s390/kernel/trace.c b/arch/s390/kernel/trace.c
index 490b52e..11a669f3 100644
--- a/arch/s390/kernel/trace.c
+++ b/arch/s390/kernel/trace.c
@@ -14,7 +14,7 @@
 
 static DEFINE_PER_CPU(unsigned int, diagnose_trace_depth);
 
-void trace_s390_diagnose_norecursion(int diag_nr)
+void notrace trace_s390_diagnose_norecursion(int diag_nr)
 {
 	unsigned long flags;
 	unsigned int *depth;
diff --git a/arch/s390/kernel/uv.c b/arch/s390/kernel/uv.c
index c86d654..4c0677f 100644
--- a/arch/s390/kernel/uv.c
+++ b/arch/s390/kernel/uv.c
@@ -23,10 +23,11 @@
 int __bootdata_preserved(prot_virt_guest);
 #endif
 
+struct uv_info __bootdata_preserved(uv_info);
+
 #if IS_ENABLED(CONFIG_KVM)
 int prot_virt_host;
 EXPORT_SYMBOL(prot_virt_host);
-struct uv_info __bootdata_preserved(uv_info);
 EXPORT_SYMBOL(uv_info);
 
 static int __init prot_virt_setup(char *val)
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 8191106..bfb4811 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -393,7 +393,7 @@
 	if (psw_mchk_disabled(vcpu))
 		active_mask &= ~IRQ_PEND_MCHK_MASK;
 	/* PV guest cpus can have a single interruption injected at a time. */
-	if (kvm_s390_pv_cpu_is_protected(vcpu) &&
+	if (kvm_s390_pv_cpu_get_handle(vcpu) &&
 	    vcpu->arch.sie_block->iictl != IICTL_CODE_NONE)
 		active_mask &= ~(IRQ_PEND_EXT_II_MASK |
 				 IRQ_PEND_IO_MASK |
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 19a8102..d05bb04 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -545,6 +545,7 @@
 	case KVM_CAP_S390_AIS:
 	case KVM_CAP_S390_AIS_MIGRATION:
 	case KVM_CAP_S390_VCPU_RESETS:
+	case KVM_CAP_SET_GUEST_DEBUG:
 		r = 1;
 		break;
 	case KVM_CAP_S390_HPAGE_1M:
@@ -1939,6 +1940,9 @@
 			start = slot + 1;
 	}
 
+	if (start >= slots->used_slots)
+		return slots->used_slots - 1;
+
 	if (gfn >= memslots[start].base_gfn &&
 	    gfn < memslots[start].base_gfn + memslots[start].npages) {
 		atomic_set(&slots->lru_slot, start);
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 69a824f..8938936 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -626,10 +626,12 @@
 	 * available for the guest are AQIC and TAPQ with the t bit set
 	 * since we do not set IC.3 (FIII) we currently will only intercept
 	 * the AQIC function code.
+	 * Note: running nested under z/VM can result in intercepts for other
+	 * function codes, e.g. PQAP(QCI). We do not support this and bail out.
 	 */
 	reg0 = vcpu->run->s.regs.gprs[0];
 	fc = (reg0 >> 24) & 0xff;
-	if (WARN_ON_ONCE(fc != 0x03))
+	if (fc != 0x03)
 		return -EOPNOTSUPP;
 
 	/* PQAP instruction is allowed for guest kernel only */
diff --git a/arch/s390/lib/uaccess.c b/arch/s390/lib/uaccess.c
index c4f8039..0267405 100644
--- a/arch/s390/lib/uaccess.c
+++ b/arch/s390/lib/uaccess.c
@@ -64,10 +64,13 @@
 {
 	mm_segment_t old_fs;
 	unsigned long asce, cr;
+	unsigned long flags;
 
 	old_fs = current->thread.mm_segment;
 	if (old_fs & 1)
 		return old_fs;
+	/* protect against a concurrent page table upgrade */
+	local_irq_save(flags);
 	current->thread.mm_segment |= 1;
 	asce = S390_lowcore.kernel_asce;
 	if (likely(old_fs == USER_DS)) {
@@ -83,6 +86,7 @@
 		__ctl_load(asce, 7, 7);
 		set_cpu_flag(CIF_ASCE_SECONDARY);
 	}
+	local_irq_restore(flags);
 	return old_fs;
 }
 EXPORT_SYMBOL(enable_sacf_uaccess);
diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c
index 498c98a..fff169d 100644
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -70,8 +70,20 @@
 {
 	struct mm_struct *mm = arg;
 
-	if (current->active_mm == mm)
-		set_user_asce(mm);
+	/* we must change all active ASCEs to avoid the creation of new TLBs */
+	if (current->active_mm == mm) {
+		S390_lowcore.user_asce = mm->context.asce;
+		if (current->thread.mm_segment == USER_DS) {
+			__ctl_load(S390_lowcore.user_asce, 1, 1);
+			/* Mark user-ASCE present in CR1 */
+			clear_cpu_flag(CIF_ASCE_PRIMARY);
+		}
+		if (current->thread.mm_segment == USER_DS_SACF) {
+			__ctl_load(S390_lowcore.user_asce, 7, 7);
+			/* enable_sacf_uaccess does all or nothing */
+			WARN_ON(!test_cpu_flag(CIF_ASCE_SECONDARY));
+		}
+	}
 	__tlb_flush_local();
 }
 
diff --git a/arch/s390/pci/pci_irq.c b/arch/s390/pci/pci_irq.c
index fbe97ab..743f257 100644
--- a/arch/s390/pci/pci_irq.c
+++ b/arch/s390/pci/pci_irq.c
@@ -115,7 +115,6 @@
 	.name = "PCI-MSI",
 	.irq_unmask = pci_msi_unmask_irq,
 	.irq_mask = pci_msi_mask_irq,
-	.irq_set_affinity = zpci_set_irq_affinity,
 };
 
 static void zpci_handle_cpu_local_irq(bool rescan)
@@ -276,7 +275,9 @@
 		rc = -EIO;
 		if (hwirq - bit >= msi_vecs)
 			break;
-		irq = __irq_alloc_descs(-1, 0, 1, 0, THIS_MODULE, msi->affinity);
+		irq = __irq_alloc_descs(-1, 0, 1, 0, THIS_MODULE,
+				(irq_delivery == DIRECTED) ?
+				msi->affinity : NULL);
 		if (irq < 0)
 			return -ENOMEM;
 		rc = irq_set_msi_desc(irq, msi);
diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h
index 9f38fb3..337663a 100644
--- a/arch/sh/include/asm/module.h
+++ b/arch/sh/include/asm/module.h
@@ -11,32 +11,4 @@
 };
 #endif
 
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-# ifdef CONFIG_CPU_SH2
-#  define MODULE_PROC_FAMILY "SH2LE "
-# elif defined  CONFIG_CPU_SH3
-#  define MODULE_PROC_FAMILY "SH3LE "
-# elif defined  CONFIG_CPU_SH4
-#  define MODULE_PROC_FAMILY "SH4LE "
-# elif defined  CONFIG_CPU_SH5
-#  define MODULE_PROC_FAMILY "SH5LE "
-# else
-#  error unknown processor family
-# endif
-#else
-# ifdef CONFIG_CPU_SH2
-#  define MODULE_PROC_FAMILY "SH2BE "
-# elif defined  CONFIG_CPU_SH3
-#  define MODULE_PROC_FAMILY "SH3BE "
-# elif defined  CONFIG_CPU_SH4
-#  define MODULE_PROC_FAMILY "SH4BE "
-# elif defined  CONFIG_CPU_SH5
-#  define MODULE_PROC_FAMILY "SH5BE "
-# else
-#  error unknown processor family
-# endif
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
 #endif /* _ASM_SH_MODULE_H */
diff --git a/arch/sh/include/asm/vermagic.h b/arch/sh/include/asm/vermagic.h
new file mode 100644
index 0000000..13d8eaa9
--- /dev/null
+++ b/arch/sh/include/asm/vermagic.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2LE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3LE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4LE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5LE "
+# else
+#  error unknown processor family
+# endif
+#else
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2BE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3BE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4BE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5BE "
+# else
+#  error unknown processor family
+# endif
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index b9de2d4..8d2a68a 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -412,7 +412,7 @@
 	unsigned long nr_pages = size >> PAGE_SHIFT;
 	int ret;
 
-	if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot)
+	if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
 		return -EINVAL;
 
 	/* We only have ZONE_NORMAL, so this is easy.. */
diff --git a/arch/um/Makefile b/arch/um/Makefile
index d2daa20..275f5ff 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -140,6 +140,7 @@
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
 CLEAN_FILES += linux x.i gmon.out
+MRPROPER_DIRS += arch/$(SUBARCH)/include/generated
 
 archclean:
 	@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1d6104e..2d3f963 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -68,6 +68,7 @@
 	select ARCH_HAS_KCOV			if X86_64
 	select ARCH_HAS_MEM_ENCRYPT
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PMEM_API		if X86_64
 	select ARCH_HAS_PTE_DEVMAP		if X86_64
 	select ARCH_HAS_PTE_SPECIAL
@@ -149,7 +150,7 @@
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD if X86_64
-	select HAVE_ARCH_USERFAULTFD_WP		if USERFAULTFD
+	select HAVE_ARCH_USERFAULTFD_WP         if X86_64 && USERFAULTFD
 	select HAVE_ARCH_VMAP_STACK		if X86_64
 	select HAVE_ARCH_WITHIN_STACK_FRAMES
 	select HAVE_ASM_MODVERSIONS
diff --git a/arch/x86/crypto/blake2s-glue.c b/arch/x86/crypto/blake2s-glue.c
index 06ef2d4..6737bce 100644
--- a/arch/x86/crypto/blake2s-glue.c
+++ b/arch/x86/crypto/blake2s-glue.c
@@ -32,16 +32,16 @@
 			   const u32 inc)
 {
 	/* SIMD disables preemption, so relax after processing each page. */
-	BUILD_BUG_ON(PAGE_SIZE / BLAKE2S_BLOCK_SIZE < 8);
+	BUILD_BUG_ON(SZ_4K / BLAKE2S_BLOCK_SIZE < 8);
 
 	if (!static_branch_likely(&blake2s_use_ssse3) || !crypto_simd_usable()) {
 		blake2s_compress_generic(state, block, nblocks, inc);
 		return;
 	}
 
-	for (;;) {
+	do {
 		const size_t blocks = min_t(size_t, nblocks,
-					    PAGE_SIZE / BLAKE2S_BLOCK_SIZE);
+					    SZ_4K / BLAKE2S_BLOCK_SIZE);
 
 		kernel_fpu_begin();
 		if (IS_ENABLED(CONFIG_AS_AVX512) &&
@@ -52,10 +52,8 @@
 		kernel_fpu_end();
 
 		nblocks -= blocks;
-		if (!nblocks)
-			break;
 		block += blocks * BLAKE2S_BLOCK_SIZE;
-	}
+	} while (nblocks);
 }
 EXPORT_SYMBOL(blake2s_compress_arch);
 
diff --git a/arch/x86/crypto/chacha_glue.c b/arch/x86/crypto/chacha_glue.c
index b412c21..2225009 100644
--- a/arch/x86/crypto/chacha_glue.c
+++ b/arch/x86/crypto/chacha_glue.c
@@ -153,9 +153,17 @@
 	    bytes <= CHACHA_BLOCK_SIZE)
 		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
 
-	kernel_fpu_begin();
-	chacha_dosimd(state, dst, src, bytes, nrounds);
-	kernel_fpu_end();
+	do {
+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
+
+		kernel_fpu_begin();
+		chacha_dosimd(state, dst, src, todo, nrounds);
+		kernel_fpu_end();
+
+		bytes -= todo;
+		src += todo;
+		dst += todo;
+	} while (bytes);
 }
 EXPORT_SYMBOL(chacha_crypt_arch);
 
diff --git a/arch/x86/crypto/nhpoly1305-avx2-glue.c b/arch/x86/crypto/nhpoly1305-avx2-glue.c
index f7567cb..80fcb85 100644
--- a/arch/x86/crypto/nhpoly1305-avx2-glue.c
+++ b/arch/x86/crypto/nhpoly1305-avx2-glue.c
@@ -29,7 +29,7 @@
 		return crypto_nhpoly1305_update(desc, src, srclen);
 
 	do {
-		unsigned int n = min_t(unsigned int, srclen, PAGE_SIZE);
+		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
 
 		kernel_fpu_begin();
 		crypto_nhpoly1305_update_helper(desc, src, n, _nh_avx2);
diff --git a/arch/x86/crypto/nhpoly1305-sse2-glue.c b/arch/x86/crypto/nhpoly1305-sse2-glue.c
index a661ede..cc6b7c1 100644
--- a/arch/x86/crypto/nhpoly1305-sse2-glue.c
+++ b/arch/x86/crypto/nhpoly1305-sse2-glue.c
@@ -29,7 +29,7 @@
 		return crypto_nhpoly1305_update(desc, src, srclen);
 
 	do {
-		unsigned int n = min_t(unsigned int, srclen, PAGE_SIZE);
+		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
 
 		kernel_fpu_begin();
 		crypto_nhpoly1305_update_helper(desc, src, n, _nh_sse2);
diff --git a/arch/x86/crypto/poly1305_glue.c b/arch/x86/crypto/poly1305_glue.c
index 6dfec19..dfe921e 100644
--- a/arch/x86/crypto/poly1305_glue.c
+++ b/arch/x86/crypto/poly1305_glue.c
@@ -91,8 +91,8 @@
 	struct poly1305_arch_internal *state = ctx;
 
 	/* SIMD disables preemption, so relax after processing each page. */
-	BUILD_BUG_ON(PAGE_SIZE < POLY1305_BLOCK_SIZE ||
-		     PAGE_SIZE % POLY1305_BLOCK_SIZE);
+	BUILD_BUG_ON(SZ_4K < POLY1305_BLOCK_SIZE ||
+		     SZ_4K % POLY1305_BLOCK_SIZE);
 
 	if (!static_branch_likely(&poly1305_use_avx) ||
 	    (len < (POLY1305_BLOCK_SIZE * 18) && !state->is_base2_26) ||
@@ -102,8 +102,8 @@
 		return;
 	}
 
-	for (;;) {
-		const size_t bytes = min_t(size_t, len, PAGE_SIZE);
+	do {
+		const size_t bytes = min_t(size_t, len, SZ_4K);
 
 		kernel_fpu_begin();
 		if (IS_ENABLED(CONFIG_AS_AVX512) && static_branch_likely(&poly1305_use_avx512))
@@ -113,11 +113,10 @@
 		else
 			poly1305_blocks_avx(ctx, inp, bytes, padbit);
 		kernel_fpu_end();
+
 		len -= bytes;
-		if (!len)
-			break;
 		inp += bytes;
-	}
+	} while (len);
 }
 
 static void poly1305_simd_emit(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 0789e13e..1c7f13b 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -98,13 +98,6 @@
 #define SIZEOF_PTREGS	21*8
 
 .macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax save_ret=0
-	/*
-	 * Push registers and sanitize registers of values that a
-	 * speculation attack might otherwise want to exploit. The
-	 * lower registers are likely clobbered well before they
-	 * could be put to use in a speculative execution gadget.
-	 * Interleave XOR with PUSH for better uop scheduling:
-	 */
 	.if \save_ret
 	pushq	%rsi		/* pt_regs->si */
 	movq	8(%rsp), %rsi	/* temporarily store the return address in %rsi */
@@ -114,34 +107,43 @@
 	pushq   %rsi		/* pt_regs->si */
 	.endif
 	pushq	\rdx		/* pt_regs->dx */
-	xorl	%edx, %edx	/* nospec   dx */
 	pushq   %rcx		/* pt_regs->cx */
-	xorl	%ecx, %ecx	/* nospec   cx */
 	pushq   \rax		/* pt_regs->ax */
 	pushq   %r8		/* pt_regs->r8 */
-	xorl	%r8d, %r8d	/* nospec   r8 */
 	pushq   %r9		/* pt_regs->r9 */
-	xorl	%r9d, %r9d	/* nospec   r9 */
 	pushq   %r10		/* pt_regs->r10 */
-	xorl	%r10d, %r10d	/* nospec   r10 */
 	pushq   %r11		/* pt_regs->r11 */
-	xorl	%r11d, %r11d	/* nospec   r11*/
 	pushq	%rbx		/* pt_regs->rbx */
-	xorl    %ebx, %ebx	/* nospec   rbx*/
 	pushq	%rbp		/* pt_regs->rbp */
-	xorl    %ebp, %ebp	/* nospec   rbp*/
 	pushq	%r12		/* pt_regs->r12 */
-	xorl	%r12d, %r12d	/* nospec   r12*/
 	pushq	%r13		/* pt_regs->r13 */
-	xorl	%r13d, %r13d	/* nospec   r13*/
 	pushq	%r14		/* pt_regs->r14 */
-	xorl	%r14d, %r14d	/* nospec   r14*/
 	pushq	%r15		/* pt_regs->r15 */
-	xorl	%r15d, %r15d	/* nospec   r15*/
 	UNWIND_HINT_REGS
+
 	.if \save_ret
 	pushq	%rsi		/* return address on top of stack */
 	.endif
+
+	/*
+	 * Sanitize registers of values that a speculation attack might
+	 * otherwise want to exploit. The lower registers are likely clobbered
+	 * well before they could be put to use in a speculative execution
+	 * gadget.
+	 */
+	xorl	%edx,  %edx	/* nospec dx  */
+	xorl	%ecx,  %ecx	/* nospec cx  */
+	xorl	%r8d,  %r8d	/* nospec r8  */
+	xorl	%r9d,  %r9d	/* nospec r9  */
+	xorl	%r10d, %r10d	/* nospec r10 */
+	xorl	%r11d, %r11d	/* nospec r11 */
+	xorl	%ebx,  %ebx	/* nospec rbx */
+	xorl	%ebp,  %ebp	/* nospec rbp */
+	xorl	%r12d, %r12d	/* nospec r12 */
+	xorl	%r13d, %r13d	/* nospec r13 */
+	xorl	%r14d, %r14d	/* nospec r14 */
+	xorl	%r15d, %r15d	/* nospec r15 */
+
 .endm
 
 .macro POP_REGS pop_rdi=1 skip_r11rcx=0
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 0e9504f..3063aa9 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -249,7 +249,6 @@
 	 */
 syscall_return_via_sysret:
 	/* rcx and r11 are already restored (see code above) */
-	UNWIND_HINT_EMPTY
 	POP_REGS pop_rdi=0 skip_r11rcx=1
 
 	/*
@@ -258,6 +257,7 @@
 	 */
 	movq	%rsp, %rdi
 	movq	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
+	UNWIND_HINT_EMPTY
 
 	pushq	RSP-RDI(%rdi)	/* RSP */
 	pushq	(%rdi)		/* RDI */
@@ -279,8 +279,7 @@
  * %rdi: prev task
  * %rsi: next task
  */
-SYM_CODE_START(__switch_to_asm)
-	UNWIND_HINT_FUNC
+SYM_FUNC_START(__switch_to_asm)
 	/*
 	 * Save callee-saved registers
 	 * This must match the order in inactive_task_frame
@@ -321,7 +320,7 @@
 	popq	%rbp
 
 	jmp	__switch_to
-SYM_CODE_END(__switch_to_asm)
+SYM_FUNC_END(__switch_to_asm)
 
 /*
  * A newly forked process directly context switches into this address.
@@ -512,7 +511,7 @@
  * +----------------------------------------------------+
  */
 SYM_CODE_START(interrupt_entry)
-	UNWIND_HINT_FUNC
+	UNWIND_HINT_IRET_REGS offset=16
 	ASM_CLAC
 	cld
 
@@ -544,9 +543,9 @@
 	pushq	5*8(%rdi)		/* regs->eflags */
 	pushq	4*8(%rdi)		/* regs->cs */
 	pushq	3*8(%rdi)		/* regs->ip */
+	UNWIND_HINT_IRET_REGS
 	pushq	2*8(%rdi)		/* regs->orig_ax */
 	pushq	8(%rdi)			/* return address */
-	UNWIND_HINT_FUNC
 
 	movq	(%rdi), %rdi
 	jmp	2f
@@ -637,6 +636,7 @@
 	 */
 	movq	%rsp, %rdi
 	movq	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
+	UNWIND_HINT_EMPTY
 
 	/* Copy the IRET frame to the trampoline stack. */
 	pushq	6*8(%rdi)	/* SS */
@@ -1739,7 +1739,7 @@
 
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rax
 	leaq	-PTREGS_SIZE(%rax), %rsp
-	UNWIND_HINT_FUNC sp_offset=PTREGS_SIZE
+	UNWIND_HINT_REGS
 
 	call	do_exit
 SYM_CODE_END(rewind_stack_do_exit)
diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c
index e4aa20c..442e1ed 100644
--- a/arch/x86/events/intel/cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -643,6 +643,7 @@
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS,	&glm_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	&glm_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	&glm_cstates),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&glm_cstates),
 
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		&icl_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE,		&icl_cstates),
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index b0da532..acf76b4 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -20,6 +20,7 @@
 #include <linux/mm.h>
 #include <linux/hyperv.h>
 #include <linux/slab.h>
+#include <linux/kernel.h>
 #include <linux/cpuhotplug.h>
 #include <linux/syscore_ops.h>
 #include <clocksource/hyperv_timer.h>
@@ -72,7 +73,8 @@
 	struct page *pg;
 
 	input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
-	pg = alloc_page(GFP_KERNEL);
+	/* hv_cpu_init() can be called with IRQs disabled from hv_resume() */
+	pg = alloc_page(irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
 	if (unlikely(!pg))
 		return -ENOMEM;
 	*input_arg = page_address(pg);
@@ -224,10 +226,18 @@
 
 	rdmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
 	if (re_ctrl.target_vp == hv_vp_index[cpu]) {
-		/* Reassign to some other online CPU */
+		/*
+		 * Reassign reenlightenment notifications to some other online
+		 * CPU or just disable the feature if there are no online CPUs
+		 * left (happens on hibernation).
+		 */
 		new_cpu = cpumask_any_but(cpu_online_mask, cpu);
 
-		re_ctrl.target_vp = hv_vp_index[new_cpu];
+		if (new_cpu < nr_cpu_ids)
+			re_ctrl.target_vp = hv_vp_index[new_cpu];
+		else
+			re_ctrl.enabled = 0;
+
 		wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
 	}
 
@@ -253,6 +263,7 @@
 static int hv_suspend(void)
 {
 	union hv_x64_msr_hypercall_contents hypercall_msr;
+	int ret;
 
 	/*
 	 * Reset the hypercall page as it is going to be invalidated
@@ -269,12 +280,17 @@
 	hypercall_msr.enable = 0;
 	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
 
-	return 0;
+	ret = hv_cpu_die(0);
+	return ret;
 }
 
 static void hv_resume(void)
 {
 	union hv_x64_msr_hypercall_contents hypercall_msr;
+	int ret;
+
+	ret = hv_cpu_init(0);
+	WARN_ON(ret);
 
 	/* Re-enable the hypercall page */
 	rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
@@ -285,8 +301,16 @@
 
 	hv_hypercall_pg = hv_hypercall_pg_saved;
 	hv_hypercall_pg_saved = NULL;
+
+	/*
+	 * Reenlightenment notifications are disabled by hv_cpu_die(0),
+	 * reenable them here if hv_reenlightenment_cb was previously set.
+	 */
+	if (hv_reenlightenment_cb)
+		set_hv_tscchange_cb(hv_reenlightenment_cb);
 }
 
+/* Note: when the ops are called, only CPU0 is online and IRQs are disabled. */
 static struct syscore_ops hv_syscore_ops = {
 	.suspend	= hv_suspend,
 	.resume		= hv_resume,
@@ -419,11 +443,14 @@
 }
 EXPORT_SYMBOL_GPL(hyperv_cleanup);
 
-void hyperv_report_panic(struct pt_regs *regs, long err)
+void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die)
 {
 	static bool panic_reported;
 	u64 guest_id;
 
+	if (in_die && !panic_on_oops)
+		return;
+
 	/*
 	 * We prefer to report panic on 'die' chain as we have proper
 	 * registers to report, but if we miss it (e.g. on BUG()) we need
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index cdcf48d..8391c11 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -178,8 +178,10 @@
 extern pgd_t * __init efi_uv1_memmap_phys_prolog(void);
 extern void __init efi_uv1_memmap_phys_epilog(pgd_t *save_pgd);
 
+/* kexec external ABI */
 struct efi_setup_data {
 	u64 fw_vendor;
+	u64 __unused;
 	u64 tables;
 	u64 smbios;
 	u64 reserved[8];
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index 85be2f5..84b9449 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -56,16 +56,23 @@
 
 #ifndef __ASSEMBLY__
 
+#if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_DYNAMIC_FTRACE)
+extern void set_ftrace_ops_ro(void);
+#else
+static inline void set_ftrace_ops_ro(void) { }
+#endif
+
 #define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
 static inline bool arch_syscall_match_sym_name(const char *sym, const char *name)
 {
 	/*
 	 * Compare the symbol name with the system call name. Skip the
-	 * "__x64_sys", "__ia32_sys" or simple "sys" prefix.
+	 * "__x64_sys", "__ia32_sys", "__do_sys" or simple "sys" prefix.
 	 */
 	return !strcmp(sym + 3, name + 3) ||
 		(!strncmp(sym, "__x64_", 6) && !strcmp(sym + 9, name + 3)) ||
-		(!strncmp(sym, "__ia32_", 7) && !strcmp(sym + 10, name + 3));
+		(!strncmp(sym, "__ia32_", 7) && !strcmp(sym + 10, name + 3)) ||
+		(!strncmp(sym, "__do_sys", 8) && !strcmp(sym + 8, name + 3));
 }
 
 #ifndef COMPILE_OFFSETS
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 42a2d0d..0a6b353 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -578,6 +578,7 @@
 	unsigned long cr4;
 	unsigned long cr4_guest_owned_bits;
 	unsigned long cr8;
+	u32 host_pkru;
 	u32 pkru;
 	u32 hflags;
 	u64 efer;
@@ -1093,8 +1094,6 @@
 	void (*set_idt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
 	void (*get_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
 	void (*set_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
-	u64 (*get_dr6)(struct kvm_vcpu *vcpu);
-	void (*set_dr6)(struct kvm_vcpu *vcpu, unsigned long value);
 	void (*sync_dirty_debug_regs)(struct kvm_vcpu *vcpu);
 	void (*set_dr7)(struct kvm_vcpu *vcpu, unsigned long value);
 	void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg);
@@ -1449,6 +1448,7 @@
 
 void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
+void kvm_queue_exception_p(struct kvm_vcpu *vcpu, unsigned nr, unsigned long payload);
 void kvm_requeue_exception(struct kvm_vcpu *vcpu, unsigned nr);
 void kvm_requeue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, struct x86_exception *fault);
@@ -1663,8 +1663,8 @@
 static inline bool kvm_irq_is_postable(struct kvm_lapic_irq *irq)
 {
 	/* We can only post Fixed and LowPrio IRQs */
-	return (irq->delivery_mode == dest_Fixed ||
-		irq->delivery_mode == dest_LowestPrio);
+	return (irq->delivery_mode == APIC_DM_FIXED ||
+		irq->delivery_mode == APIC_DM_LOWEST);
 }
 
 static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/include/asm/microcode_amd.h b/arch/x86/include/asm/microcode_amd.h
index 6685e12..7063b5a 100644
--- a/arch/x86/include/asm/microcode_amd.h
+++ b/arch/x86/include/asm/microcode_amd.h
@@ -41,7 +41,7 @@
 	unsigned int			mpb[0];
 };
 
-#define PATCH_MAX_SIZE PAGE_SIZE
+#define PATCH_MAX_SIZE (3 * PAGE_SIZE)
 
 #ifdef CONFIG_MICROCODE_AMD
 extern void __init load_ucode_amd_bsp(unsigned int family);
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index c215d27..e988bac 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -13,64 +13,4 @@
 #endif
 };
 
-#ifdef CONFIG_X86_64
-/* X86_64 does not define MODULE_PROC_FAMILY */
-#elif defined CONFIG_M486SX
-#define MODULE_PROC_FAMILY "486SX "
-#elif defined CONFIG_M486
-#define MODULE_PROC_FAMILY "486 "
-#elif defined CONFIG_M586
-#define MODULE_PROC_FAMILY "586 "
-#elif defined CONFIG_M586TSC
-#define MODULE_PROC_FAMILY "586TSC "
-#elif defined CONFIG_M586MMX
-#define MODULE_PROC_FAMILY "586MMX "
-#elif defined CONFIG_MCORE2
-#define MODULE_PROC_FAMILY "CORE2 "
-#elif defined CONFIG_MATOM
-#define MODULE_PROC_FAMILY "ATOM "
-#elif defined CONFIG_M686
-#define MODULE_PROC_FAMILY "686 "
-#elif defined CONFIG_MPENTIUMII
-#define MODULE_PROC_FAMILY "PENTIUMII "
-#elif defined CONFIG_MPENTIUMIII
-#define MODULE_PROC_FAMILY "PENTIUMIII "
-#elif defined CONFIG_MPENTIUMM
-#define MODULE_PROC_FAMILY "PENTIUMM "
-#elif defined CONFIG_MPENTIUM4
-#define MODULE_PROC_FAMILY "PENTIUM4 "
-#elif defined CONFIG_MK6
-#define MODULE_PROC_FAMILY "K6 "
-#elif defined CONFIG_MK7
-#define MODULE_PROC_FAMILY "K7 "
-#elif defined CONFIG_MK8
-#define MODULE_PROC_FAMILY "K8 "
-#elif defined CONFIG_MELAN
-#define MODULE_PROC_FAMILY "ELAN "
-#elif defined CONFIG_MCRUSOE
-#define MODULE_PROC_FAMILY "CRUSOE "
-#elif defined CONFIG_MEFFICEON
-#define MODULE_PROC_FAMILY "EFFICEON "
-#elif defined CONFIG_MWINCHIPC6
-#define MODULE_PROC_FAMILY "WINCHIPC6 "
-#elif defined CONFIG_MWINCHIP3D
-#define MODULE_PROC_FAMILY "WINCHIP3D "
-#elif defined CONFIG_MCYRIXIII
-#define MODULE_PROC_FAMILY "CYRIXIII "
-#elif defined CONFIG_MVIAC3_2
-#define MODULE_PROC_FAMILY "VIAC3-2 "
-#elif defined CONFIG_MVIAC7
-#define MODULE_PROC_FAMILY "VIAC7 "
-#elif defined CONFIG_MGEODEGX1
-#define MODULE_PROC_FAMILY "GEODEGX1 "
-#elif defined CONFIG_MGEODE_LX
-#define MODULE_PROC_FAMILY "GEODE "
-#else
-#error unknown processor family
-#endif
-
-#ifdef CONFIG_X86_32
-# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-#endif
-
 #endif /* _ASM_X86_MODULE_H */
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 1c42ecb..d30805e 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -35,6 +35,8 @@
 	rdmsrl(HV_X64_MSR_SINT0 + int_num, val)
 #define hv_set_synint_state(int_num, val) \
 	wrmsrl(HV_X64_MSR_SINT0 + int_num, val)
+#define hv_recommend_using_aeoi() \
+	(!(ms_hyperv.hints & HV_DEPRECATING_AEOI_RECOMMENDED))
 
 #define hv_get_crash_ctl(val) \
 	rdmsrl(HV_X64_MSR_CRASH_CTL, val)
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index 07e95dc..7e9a281 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -237,27 +237,6 @@
 extern char __indirect_thunk_start[];
 extern char __indirect_thunk_end[];
 
-/*
- * On VMEXIT we must ensure that no RSB predictions learned in the guest
- * can be followed in the host, by overwriting the RSB completely. Both
- * retpoline and IBRS mitigations for Spectre v2 need this; only on future
- * CPUs with IBRS_ALL *might* it be avoided.
- */
-static inline void vmexit_fill_RSB(void)
-{
-#ifdef CONFIG_RETPOLINE
-	unsigned long loops;
-
-	asm volatile (ANNOTATE_NOSPEC_ALTERNATIVE
-		      ALTERNATIVE("jmp 910f",
-				  __stringify(__FILL_RETURN_BUFFER(%0, RSB_CLEAR_LOOPS, %1)),
-				  X86_FEATURE_RETPOLINE)
-		      "910:"
-		      : "=r" (loops), ASM_CALL_CONSTRAINT
-		      : : "memory" );
-#endif
-}
-
 static __always_inline
 void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
 {
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index 91e29b6..9804a79 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -55,8 +55,13 @@
 /*
  * Initialize the stackprotector canary value.
  *
- * NOTE: this must only be called from functions that never return,
+ * NOTE: this must only be called from functions that never return
  * and it must always be inlined.
+ *
+ * In addition, it should be called from a compilation unit for which
+ * stack protector is disabled. Alternatively, the caller should not end
+ * with a function call which gets tail-call optimized as that would
+ * lead to checking a modified canary value.
  */
 static __always_inline void boot_init_stack_canary(void)
 {
diff --git a/arch/x86/include/asm/unwind.h b/arch/x86/include/asm/unwind.h
index 499578f..70fc159 100644
--- a/arch/x86/include/asm/unwind.h
+++ b/arch/x86/include/asm/unwind.h
@@ -19,7 +19,7 @@
 #if defined(CONFIG_UNWINDER_ORC)
 	bool signal, full_regs;
 	unsigned long sp, bp, ip;
-	struct pt_regs *regs;
+	struct pt_regs *regs, *prev_regs;
 #elif defined(CONFIG_UNWINDER_FRAME_POINTER)
 	bool got_irq;
 	unsigned long *bp, *orig_sp, ip;
diff --git a/arch/x86/include/asm/vermagic.h b/arch/x86/include/asm/vermagic.h
new file mode 100644
index 0000000..75884d2
--- /dev/null
+++ b/arch/x86/include/asm/vermagic.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_X86_64
+/* X86_64 does not define MODULE_PROC_FAMILY */
+#elif defined CONFIG_M486SX
+#define MODULE_PROC_FAMILY "486SX "
+#elif defined CONFIG_M486
+#define MODULE_PROC_FAMILY "486 "
+#elif defined CONFIG_M586
+#define MODULE_PROC_FAMILY "586 "
+#elif defined CONFIG_M586TSC
+#define MODULE_PROC_FAMILY "586TSC "
+#elif defined CONFIG_M586MMX
+#define MODULE_PROC_FAMILY "586MMX "
+#elif defined CONFIG_MCORE2
+#define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_MATOM
+#define MODULE_PROC_FAMILY "ATOM "
+#elif defined CONFIG_M686
+#define MODULE_PROC_FAMILY "686 "
+#elif defined CONFIG_MPENTIUMII
+#define MODULE_PROC_FAMILY "PENTIUMII "
+#elif defined CONFIG_MPENTIUMIII
+#define MODULE_PROC_FAMILY "PENTIUMIII "
+#elif defined CONFIG_MPENTIUMM
+#define MODULE_PROC_FAMILY "PENTIUMM "
+#elif defined CONFIG_MPENTIUM4
+#define MODULE_PROC_FAMILY "PENTIUM4 "
+#elif defined CONFIG_MK6
+#define MODULE_PROC_FAMILY "K6 "
+#elif defined CONFIG_MK7
+#define MODULE_PROC_FAMILY "K7 "
+#elif defined CONFIG_MK8
+#define MODULE_PROC_FAMILY "K8 "
+#elif defined CONFIG_MELAN
+#define MODULE_PROC_FAMILY "ELAN "
+#elif defined CONFIG_MCRUSOE
+#define MODULE_PROC_FAMILY "CRUSOE "
+#elif defined CONFIG_MEFFICEON
+#define MODULE_PROC_FAMILY "EFFICEON "
+#elif defined CONFIG_MWINCHIPC6
+#define MODULE_PROC_FAMILY "WINCHIPC6 "
+#elif defined CONFIG_MWINCHIP3D
+#define MODULE_PROC_FAMILY "WINCHIP3D "
+#elif defined CONFIG_MCYRIXIII
+#define MODULE_PROC_FAMILY "CYRIXIII "
+#elif defined CONFIG_MVIAC3_2
+#define MODULE_PROC_FAMILY "VIAC3-2 "
+#elif defined CONFIG_MVIAC7
+#define MODULE_PROC_FAMILY "VIAC7 "
+#elif defined CONFIG_MGEODEGX1
+#define MODULE_PROC_FAMILY "GEODEGX1 "
+#elif defined CONFIG_MGEODE_LX
+#define MODULE_PROC_FAMILY "GEODE "
+#else
+#error unknown processor family
+#endif
+
+#ifdef CONFIG_X86_32
+# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+#else
+# define MODULE_ARCH_VERMAGIC ""
+#endif
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 81b9c63..e53dda2 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -352,8 +352,6 @@
 		 * According to Intel, MFENCE can do the serialization here.
 		 */
 		asm volatile("mfence" : : : "memory");
-
-		printk_once(KERN_DEBUG "TSC deadline timer enabled\n");
 		return;
 	}
 
@@ -546,7 +544,7 @@
 };
 static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
 
-static u32 hsx_deadline_rev(void)
+static __init u32 hsx_deadline_rev(void)
 {
 	switch (boot_cpu_data.x86_stepping) {
 	case 0x02: return 0x3a; /* EP */
@@ -556,7 +554,7 @@
 	return ~0U;
 }
 
-static u32 bdx_deadline_rev(void)
+static __init u32 bdx_deadline_rev(void)
 {
 	switch (boot_cpu_data.x86_stepping) {
 	case 0x02: return 0x00000011;
@@ -568,7 +566,7 @@
 	return ~0U;
 }
 
-static u32 skx_deadline_rev(void)
+static __init u32 skx_deadline_rev(void)
 {
 	switch (boot_cpu_data.x86_stepping) {
 	case 0x03: return 0x01000136;
@@ -581,7 +579,7 @@
 	return ~0U;
 }
 
-static const struct x86_cpu_id deadline_match[] = {
+static const struct x86_cpu_id deadline_match[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL( HASWELL_X,		&hsx_deadline_rev),
 	X86_MATCH_INTEL_FAM6_MODEL( BROADWELL_X,	0x0b000020),
 	X86_MATCH_INTEL_FAM6_MODEL( BROADWELL_D,	&bdx_deadline_rev),
@@ -603,18 +601,19 @@
 	{},
 };
 
-static void apic_check_deadline_errata(void)
+static __init bool apic_validate_deadline_timer(void)
 {
 	const struct x86_cpu_id *m;
 	u32 rev;
 
-	if (!boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER) ||
-	    boot_cpu_has(X86_FEATURE_HYPERVISOR))
-		return;
+	if (!boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER))
+		return false;
+	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
+		return true;
 
 	m = x86_match_cpu(deadline_match);
 	if (!m)
-		return;
+		return true;
 
 	/*
 	 * Function pointers will have the MSB set due to address layout,
@@ -626,11 +625,12 @@
 		rev = (u32)m->driver_data;
 
 	if (boot_cpu_data.microcode >= rev)
-		return;
+		return true;
 
 	setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
 	pr_err(FW_BUG "TSC_DEADLINE disabled due to Errata; "
 	       "please update microcode to version: 0x%x (or later)\n", rev);
+	return false;
 }
 
 /*
@@ -2092,7 +2092,8 @@
 {
 	unsigned int new_apicid;
 
-	apic_check_deadline_errata();
+	if (apic_validate_deadline_timer())
+		pr_debug("TSC deadline timer available\n");
 
 	if (x2apic_mode) {
 		boot_cpu_physical_apicid = read_apic_id();
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index bf08d45..a19a680 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -1119,35 +1119,53 @@
 	sld_update_msr(!(tifn & _TIF_SLD));
 }
 
-#define SPLIT_LOCK_CPU(model) {X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY}
-
 /*
- * The following processors have the split lock detection feature. But
- * since they don't have the IA32_CORE_CAPABILITIES MSR, the feature cannot
- * be enumerated. Enable it by family and model matching on these
- * processors.
+ * Bits in the IA32_CORE_CAPABILITIES are not architectural, so they should
+ * only be trusted if it is confirmed that a CPU model implements a
+ * specific feature at a particular bit position.
+ *
+ * The possible driver data field values:
+ *
+ * - 0: CPU models that are known to have the per-core split-lock detection
+ *	feature even though they do not enumerate IA32_CORE_CAPABILITIES.
+ *
+ * - 1: CPU models which may enumerate IA32_CORE_CAPABILITIES and if so use
+ *      bit 5 to enumerate the per-core split-lock detection feature.
  */
 static const struct x86_cpu_id split_lock_cpu_ids[] __initconst = {
-	SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_X),
-	SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_L),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		0),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		0),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	1),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	1),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	1),
 	{}
 };
 
 void __init cpu_set_core_cap_bits(struct cpuinfo_x86 *c)
 {
-	u64 ia32_core_caps = 0;
+	const struct x86_cpu_id *m;
+	u64 ia32_core_caps;
 
-	if (c->x86_vendor != X86_VENDOR_INTEL)
+	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 		return;
-	if (cpu_has(c, X86_FEATURE_CORE_CAPABILITIES)) {
-		/* Enumerate features reported in IA32_CORE_CAPABILITIES MSR. */
+
+	m = x86_match_cpu(split_lock_cpu_ids);
+	if (!m)
+		return;
+
+	switch (m->driver_data) {
+	case 0:
+		break;
+	case 1:
+		if (!cpu_has(c, X86_FEATURE_CORE_CAPABILITIES))
+			return;
 		rdmsrl(MSR_IA32_CORE_CAPS, ia32_core_caps);
-	} else if (!boot_cpu_has(X86_FEATURE_HYPERVISOR)) {
-		/* Enumerate split lock detection by family and model. */
-		if (x86_match_cpu(split_lock_cpu_ids))
-			ia32_core_caps |= MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT;
+		if (!(ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT))
+			return;
+		break;
+	default:
+		return;
 	}
 
-	if (ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT)
-		split_lock_setup();
+	split_lock_setup();
 }
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index caa032c..ebf34c7 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -227,8 +227,8 @@
 	ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES);
 	ms_hyperv.hints    = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);
 
-	pr_info("Hyper-V: features 0x%x, hints 0x%x\n",
-		ms_hyperv.features, ms_hyperv.hints);
+	pr_info("Hyper-V: features 0x%x, hints 0x%x, misc 0x%x\n",
+		ms_hyperv.features, ms_hyperv.hints, ms_hyperv.misc_features);
 
 	ms_hyperv.max_vp_index = cpuid_eax(HYPERV_CPUID_IMPLEMENT_LIMITS);
 	ms_hyperv.max_lp_index = cpuid_ebx(HYPERV_CPUID_IMPLEMENT_LIMITS);
@@ -263,6 +263,16 @@
 			cpuid_eax(HYPERV_CPUID_NESTED_FEATURES);
 	}
 
+	/*
+	 * Hyper-V expects to get crash register data or kmsg when
+	 * crash enlightment is available and system crashes. Set
+	 * crash_kexec_post_notifiers to be true to make sure that
+	 * calling crash enlightment interface before running kdump
+	 * kernel.
+	 */
+	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE)
+		crash_kexec_post_notifiers = true;
+
 #ifdef CONFIG_X86_LOCAL_APIC
 	if (ms_hyperv.features & HV_X64_ACCESS_FREQUENCY_MSRS &&
 	    ms_hyperv.misc_features & HV_FEATURE_FREQUENCY_MSRS_AVAILABLE) {
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 89049b3..d8cc522 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -578,6 +578,8 @@
 	d->id = id;
 	cpumask_set_cpu(cpu, &d->cpu_mask);
 
+	rdt_domain_reconfigure_cdp(r);
+
 	if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
 		kfree(d);
 		return;
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 181c992..3dd13f3 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -601,5 +601,6 @@
 void __check_limbo(struct rdt_domain *d, bool force_free);
 bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r);
 bool cbm_validate_amd(char *buf, u32 *data, struct rdt_resource *r);
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
 
 #endif /* _ASM_X86_RESCTRL_INTERNAL_H */
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 064e9ef..5a359d9 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1859,6 +1859,19 @@
 	return 0;
 }
 
+/* Restore the qos cfg state when a domain comes online */
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r)
+{
+	if (!r->alloc_capable)
+		return;
+
+	if (r == &rdt_resources_all[RDT_RESOURCE_L2DATA])
+		l2_qos_cfg_update(&r->alloc_enabled);
+
+	if (r == &rdt_resources_all[RDT_RESOURCE_L3DATA])
+		l3_qos_cfg_update(&r->alloc_enabled);
+}
+
 /*
  * Enable or disable the MBA software controller
  * which helps user specify bandwidth in MBps.
@@ -3072,7 +3085,8 @@
 	 * If the rdtgroup is a mon group and parent directory
 	 * is a valid "mon_groups" directory, remove the mon group.
 	 */
-	if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn) {
+	if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn &&
+	    rdtgrp != &rdtgroup_default) {
 		if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP ||
 		    rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED) {
 			ret = rdtgroup_ctrl_remove(kn, rdtgrp);
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 87b9789..460ae7f6 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -183,7 +183,8 @@
 	 */
 	if (visit_mask) {
 		if (*visit_mask & (1UL << info->type)) {
-			printk_deferred_once(KERN_WARNING "WARNING: stack recursion on stack type %d\n", info->type);
+			if (task == current)
+				printk_deferred_once(KERN_WARNING "WARNING: stack recursion on stack type %d\n", info->type);
 			goto unknown;
 		}
 		*visit_mask |= 1UL << info->type;
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 37a0aea..b0e6417 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -407,7 +407,8 @@
 
 	set_vm_flush_reset_perms(trampoline);
 
-	set_memory_ro((unsigned long)trampoline, npages);
+	if (likely(system_state != SYSTEM_BOOTING))
+		set_memory_ro((unsigned long)trampoline, npages);
 	set_memory_x((unsigned long)trampoline, npages);
 	return (unsigned long)trampoline;
 fail:
@@ -415,6 +416,32 @@
 	return 0;
 }
 
+void set_ftrace_ops_ro(void)
+{
+	struct ftrace_ops *ops;
+	unsigned long start_offset;
+	unsigned long end_offset;
+	unsigned long npages;
+	unsigned long size;
+
+	do_for_each_ftrace_op(ops, ftrace_ops_list) {
+		if (!(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
+			continue;
+
+		if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
+			start_offset = (unsigned long)ftrace_regs_caller;
+			end_offset = (unsigned long)ftrace_regs_caller_end;
+		} else {
+			start_offset = (unsigned long)ftrace_caller;
+			end_offset = (unsigned long)ftrace_epilogue;
+		}
+		size = end_offset - start_offset;
+		size = size + RET_SIZE + sizeof(void *);
+		npages = DIV_ROUND_UP(size, PAGE_SIZE);
+		set_memory_ro((unsigned long)ops->trampoline, npages);
+	} while_for_each_ftrace_op(ops);
+}
+
 static unsigned long calc_trampoline_call_offset(bool save_regs)
 {
 	unsigned long start_offset;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index fe3ab96..2f24c33 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -147,7 +147,7 @@
 	*((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
 }
 
-static void init_freq_invariance(void);
+static void init_freq_invariance(bool secondary);
 
 /*
  * Report back to the Boot Processor during boot time or to the caller processor
@@ -185,7 +185,7 @@
 	 */
 	set_cpu_sibling_map(raw_smp_processor_id());
 
-	init_freq_invariance();
+	init_freq_invariance(true);
 
 	/*
 	 * Get our bogomips.
@@ -266,6 +266,14 @@
 
 	wmb();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+
+	/*
+	 * Prevent tail call to cpu_startup_entry() because the stack protector
+	 * guard has been changed a couple of function calls up, in
+	 * boot_init_stack_canary() and must not be checked before tail calling
+	 * another function.
+	 */
+	prevent_tail_call_optimization();
 }
 
 /**
@@ -1341,7 +1349,7 @@
 	set_sched_topology(x86_topology);
 
 	set_cpu_sibling_map(0);
-	init_freq_invariance();
+	init_freq_invariance(false);
 	smp_sanity_check();
 
 	switch (apic_intr_mode) {
@@ -1877,9 +1885,6 @@
 	int err, i;
 	u64 msr;
 
-	if (!x86_match_cpu(has_knl_turbo_ratio_limits))
-		return false;
-
 	err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq);
 	if (err)
 		return false;
@@ -1945,18 +1950,23 @@
 
 static bool core_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq)
 {
+	u64 msr;
 	int err;
 
 	err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq);
 	if (err)
 		return false;
 
-	err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, turbo_freq);
+	err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, &msr);
 	if (err)
 		return false;
 
-	*base_freq = (*base_freq >> 8) & 0xFF;      /* max P state */
-	*turbo_freq = (*turbo_freq >> 24) & 0xFF;   /* 4C turbo    */
+	*base_freq = (*base_freq >> 8) & 0xFF;    /* max P state */
+	*turbo_freq = (msr >> 24) & 0xFF;         /* 4C turbo    */
+
+	/* The CPU may have less than 4 cores */
+	if (!*turbo_freq)
+		*turbo_freq = msr & 0xFF;         /* 1C turbo    */
 
 	return true;
 }
@@ -1972,7 +1982,8 @@
 	    skx_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
 		goto out;
 
-	if (knl_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
+	if (x86_match_cpu(has_knl_turbo_ratio_limits) &&
+	    knl_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
 		goto out;
 
 	if (x86_match_cpu(has_skx_turbo_ratio_limits) &&
@@ -1985,13 +1996,22 @@
 	return false;
 
 out:
+	/*
+	 * Some hypervisors advertise X86_FEATURE_APERFMPERF
+	 * but then fill all MSR's with zeroes.
+	 */
+	if (!base_freq) {
+		pr_debug("Couldn't determine cpu base frequency, necessary for scale-invariant accounting.\n");
+		return false;
+	}
+
 	arch_turbo_freq_ratio = div_u64(turbo_freq * SCHED_CAPACITY_SCALE,
 					base_freq);
 	arch_set_max_freq_ratio(turbo_disabled());
 	return true;
 }
 
-static void init_counter_refs(void *arg)
+static void init_counter_refs(void)
 {
 	u64 aperf, mperf;
 
@@ -2002,18 +2022,25 @@
 	this_cpu_write(arch_prev_mperf, mperf);
 }
 
-static void init_freq_invariance(void)
+static void init_freq_invariance(bool secondary)
 {
 	bool ret = false;
 
-	if (smp_processor_id() != 0 || !boot_cpu_has(X86_FEATURE_APERFMPERF))
+	if (!boot_cpu_has(X86_FEATURE_APERFMPERF))
 		return;
 
+	if (secondary) {
+		if (static_branch_likely(&arch_scale_freq_key)) {
+			init_counter_refs();
+		}
+		return;
+	}
+
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
 		ret = intel_set_max_freq_ratio();
 
 	if (ret) {
-		on_each_cpu(init_counter_refs, NULL, 1);
+		init_counter_refs();
 		static_branch_enable(&arch_scale_freq_key);
 	} else {
 		pr_debug("Couldn't determine max cpu frequency, necessary for scale-invariant accounting.\n");
diff --git a/arch/x86/kernel/umip.c b/arch/x86/kernel/umip.c
index 4d732a4..8d5cbe1 100644
--- a/arch/x86/kernel/umip.c
+++ b/arch/x86/kernel/umip.c
@@ -81,7 +81,7 @@
 #define	UMIP_INST_SLDT  3       /* 0F 00 /0 */
 #define	UMIP_INST_STR   4       /* 0F 00 /1 */
 
-const char * const umip_insns[5] = {
+static const char * const umip_insns[5] = {
 	[UMIP_INST_SGDT] = "SGDT",
 	[UMIP_INST_SIDT] = "SIDT",
 	[UMIP_INST_SMSW] = "SMSW",
diff --git a/arch/x86/kernel/unwind_frame.c b/arch/x86/kernel/unwind_frame.c
index a224b5a..54226110 100644
--- a/arch/x86/kernel/unwind_frame.c
+++ b/arch/x86/kernel/unwind_frame.c
@@ -344,6 +344,9 @@
 	if (IS_ENABLED(CONFIG_X86_32))
 		goto the_end;
 
+	if (state->task != current)
+		goto the_end;
+
 	if (state->regs) {
 		printk_deferred_once(KERN_WARNING
 			"WARNING: kernel stack regs at %p in %s:%d has bad 'bp' value %p\n",
diff --git a/arch/x86/kernel/unwind_orc.c b/arch/x86/kernel/unwind_orc.c
index e9cc182..fa79e42 100644
--- a/arch/x86/kernel/unwind_orc.c
+++ b/arch/x86/kernel/unwind_orc.c
@@ -8,19 +8,21 @@
 #include <asm/orc_lookup.h>
 
 #define orc_warn(fmt, ...) \
-	printk_deferred_once(KERN_WARNING pr_fmt("WARNING: " fmt), ##__VA_ARGS__)
+	printk_deferred_once(KERN_WARNING "WARNING: " fmt, ##__VA_ARGS__)
+
+#define orc_warn_current(args...)					\
+({									\
+	if (state->task == current)					\
+		orc_warn(args);						\
+})
 
 extern int __start_orc_unwind_ip[];
 extern int __stop_orc_unwind_ip[];
 extern struct orc_entry __start_orc_unwind[];
 extern struct orc_entry __stop_orc_unwind[];
 
-static DEFINE_MUTEX(sort_mutex);
-int *cur_orc_ip_table = __start_orc_unwind_ip;
-struct orc_entry *cur_orc_table = __start_orc_unwind;
-
-unsigned int lookup_num_blocks;
-bool orc_init;
+static bool orc_init __ro_after_init;
+static unsigned int lookup_num_blocks __ro_after_init;
 
 static inline unsigned long orc_ip(const int *ip)
 {
@@ -142,9 +144,6 @@
 {
 	static struct orc_entry *orc;
 
-	if (!orc_init)
-		return NULL;
-
 	if (ip == 0)
 		return &null_orc_entry;
 
@@ -189,6 +188,10 @@
 
 #ifdef CONFIG_MODULES
 
+static DEFINE_MUTEX(sort_mutex);
+static int *cur_orc_ip_table = __start_orc_unwind_ip;
+static struct orc_entry *cur_orc_table = __start_orc_unwind;
+
 static void orc_sort_swap(void *_a, void *_b, int size)
 {
 	struct orc_entry *orc_a, *orc_b;
@@ -381,9 +384,38 @@
 	return true;
 }
 
+/*
+ * If state->regs is non-NULL, and points to a full pt_regs, just get the reg
+ * value from state->regs.
+ *
+ * Otherwise, if state->regs just points to IRET regs, and the previous frame
+ * had full regs, it's safe to get the value from the previous regs.  This can
+ * happen when early/late IRQ entry code gets interrupted by an NMI.
+ */
+static bool get_reg(struct unwind_state *state, unsigned int reg_off,
+		    unsigned long *val)
+{
+	unsigned int reg = reg_off/8;
+
+	if (!state->regs)
+		return false;
+
+	if (state->full_regs) {
+		*val = ((unsigned long *)state->regs)[reg];
+		return true;
+	}
+
+	if (state->prev_regs) {
+		*val = ((unsigned long *)state->prev_regs)[reg];
+		return true;
+	}
+
+	return false;
+}
+
 bool unwind_next_frame(struct unwind_state *state)
 {
-	unsigned long ip_p, sp, orig_ip = state->ip, prev_sp = state->sp;
+	unsigned long ip_p, sp, tmp, orig_ip = state->ip, prev_sp = state->sp;
 	enum stack_type prev_type = state->stack_info.type;
 	struct orc_entry *orc;
 	bool indirect = false;
@@ -445,43 +477,39 @@
 		break;
 
 	case ORC_REG_R10:
-		if (!state->regs || !state->full_regs) {
-			orc_warn("missing regs for base reg R10 at ip %pB\n",
-				 (void *)state->ip);
+		if (!get_reg(state, offsetof(struct pt_regs, r10), &sp)) {
+			orc_warn_current("missing R10 value at %pB\n",
+					 (void *)state->ip);
 			goto err;
 		}
-		sp = state->regs->r10;
 		break;
 
 	case ORC_REG_R13:
-		if (!state->regs || !state->full_regs) {
-			orc_warn("missing regs for base reg R13 at ip %pB\n",
-				 (void *)state->ip);
+		if (!get_reg(state, offsetof(struct pt_regs, r13), &sp)) {
+			orc_warn_current("missing R13 value at %pB\n",
+					 (void *)state->ip);
 			goto err;
 		}
-		sp = state->regs->r13;
 		break;
 
 	case ORC_REG_DI:
-		if (!state->regs || !state->full_regs) {
-			orc_warn("missing regs for base reg DI at ip %pB\n",
-				 (void *)state->ip);
+		if (!get_reg(state, offsetof(struct pt_regs, di), &sp)) {
+			orc_warn_current("missing RDI value at %pB\n",
+					 (void *)state->ip);
 			goto err;
 		}
-		sp = state->regs->di;
 		break;
 
 	case ORC_REG_DX:
-		if (!state->regs || !state->full_regs) {
-			orc_warn("missing regs for base reg DX at ip %pB\n",
-				 (void *)state->ip);
+		if (!get_reg(state, offsetof(struct pt_regs, dx), &sp)) {
+			orc_warn_current("missing DX value at %pB\n",
+					 (void *)state->ip);
 			goto err;
 		}
-		sp = state->regs->dx;
 		break;
 
 	default:
-		orc_warn("unknown SP base reg %d for ip %pB\n",
+		orc_warn("unknown SP base reg %d at %pB\n",
 			 orc->sp_reg, (void *)state->ip);
 		goto err;
 	}
@@ -504,44 +532,48 @@
 
 		state->sp = sp;
 		state->regs = NULL;
+		state->prev_regs = NULL;
 		state->signal = false;
 		break;
 
 	case ORC_TYPE_REGS:
 		if (!deref_stack_regs(state, sp, &state->ip, &state->sp)) {
-			orc_warn("can't dereference registers at %p for ip %pB\n",
-				 (void *)sp, (void *)orig_ip);
+			orc_warn_current("can't access registers at %pB\n",
+					 (void *)orig_ip);
 			goto err;
 		}
 
 		state->regs = (struct pt_regs *)sp;
+		state->prev_regs = NULL;
 		state->full_regs = true;
 		state->signal = true;
 		break;
 
 	case ORC_TYPE_REGS_IRET:
 		if (!deref_stack_iret_regs(state, sp, &state->ip, &state->sp)) {
-			orc_warn("can't dereference iret registers at %p for ip %pB\n",
-				 (void *)sp, (void *)orig_ip);
+			orc_warn_current("can't access iret registers at %pB\n",
+					 (void *)orig_ip);
 			goto err;
 		}
 
+		if (state->full_regs)
+			state->prev_regs = state->regs;
 		state->regs = (void *)sp - IRET_FRAME_OFFSET;
 		state->full_regs = false;
 		state->signal = true;
 		break;
 
 	default:
-		orc_warn("unknown .orc_unwind entry type %d for ip %pB\n",
+		orc_warn("unknown .orc_unwind entry type %d at %pB\n",
 			 orc->type, (void *)orig_ip);
-		break;
+		goto err;
 	}
 
 	/* Find BP: */
 	switch (orc->bp_reg) {
 	case ORC_REG_UNDEFINED:
-		if (state->regs && state->full_regs)
-			state->bp = state->regs->bp;
+		if (get_reg(state, offsetof(struct pt_regs, bp), &tmp))
+			state->bp = tmp;
 		break;
 
 	case ORC_REG_PREV_SP:
@@ -564,8 +596,8 @@
 	if (state->stack_info.type == prev_type &&
 	    on_stack(&state->stack_info, (void *)state->sp, sizeof(long)) &&
 	    state->sp <= prev_sp) {
-		orc_warn("stack going in the wrong direction? ip=%pB\n",
-			 (void *)orig_ip);
+		orc_warn_current("stack going in the wrong direction? at %pB\n",
+				 (void *)orig_ip);
 		goto err;
 	}
 
@@ -588,17 +620,20 @@
 	memset(state, 0, sizeof(*state));
 	state->task = task;
 
+	if (!orc_init)
+		goto err;
+
 	/*
 	 * Refuse to unwind the stack of a task while it's executing on another
 	 * CPU.  This check is racy, but that's ok: the unwinder has other
 	 * checks to prevent it from going off the rails.
 	 */
 	if (task_on_another_cpu(task))
-		goto done;
+		goto err;
 
 	if (regs) {
 		if (user_mode(regs))
-			goto done;
+			goto the_end;
 
 		state->ip = regs->ip;
 		state->sp = regs->sp;
@@ -631,6 +666,7 @@
 		 * generate some kind of backtrace if this happens.
 		 */
 		void *next_page = (void *)PAGE_ALIGN((unsigned long)state->sp);
+		state->error = true;
 		if (get_stack_info(next_page, state->task, &state->stack_info,
 				   &state->stack_mask))
 			return;
@@ -651,13 +687,14 @@
 	/* Otherwise, skip ahead to the user-specified starting frame: */
 	while (!unwind_done(state) &&
 	       (!on_stack(&state->stack_info, first_frame, sizeof(long)) ||
-			state->sp <= (unsigned long)first_frame))
+			state->sp < (unsigned long)first_frame))
 		unwind_next_frame(state);
 
 	return;
 
-done:
+err:
+	state->error = true;
+the_end:
 	state->stack_info.type = STACK_TYPE_UNKNOWN;
-	return;
 }
 EXPORT_SYMBOL_GPL(__unwind_start);
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index a789759..4a3081e 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -3,6 +3,10 @@
 ccflags-y += -Iarch/x86/kvm
 ccflags-$(CONFIG_KVM_WERROR) += -Werror
 
+ifeq ($(CONFIG_FRAME_POINTER),y)
+OBJECT_FILES_NON_STANDARD_vmenter.o := y
+endif
+
 KVM := ../../../virt/kvm
 
 kvm-y			+= $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index bcefa9d..54d4b98 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -1427,7 +1427,7 @@
 	 */
 	kvm_make_vcpus_request_mask(kvm,
 				    KVM_REQ_TLB_FLUSH | KVM_REQUEST_NO_WAKEUP,
-				    vcpu_mask, &hv_vcpu->tlb_flush);
+				    NULL, vcpu_mask, &hv_vcpu->tlb_flush);
 
 ret_success:
 	/* We always do full TLB flush, set rep_done = rep_cnt. */
diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index 750ff0b..d057376 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -225,12 +225,12 @@
 	}
 
 	/*
-	 * AMD SVM AVIC accelerate EOI write and do not trap,
-	 * in-kernel IOAPIC will not be able to receive the EOI.
-	 * In this case, we do lazy update of the pending EOI when
-	 * trying to set IOAPIC irq.
+	 * AMD SVM AVIC accelerate EOI write iff the interrupt is edge
+	 * triggered, in which case the in-kernel IOAPIC will not be able
+	 * to receive the EOI.  In this case, we do a lazy update of the
+	 * pending EOI when trying to set IOAPIC irq.
 	 */
-	if (kvm_apicv_activated(ioapic->kvm))
+	if (edge && kvm_apicv_activated(ioapic->kvm))
 		ioapic_lazy_update_eoi(ioapic, irq);
 
 	/*
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 90a1ca9..9a2a62e5 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 
 #include <asm/msr-index.h>
+#include <asm/debugreg.h>
 
 #include "kvm_emulate.h"
 #include "trace.h"
@@ -267,7 +268,7 @@
 	svm->vmcb->save.rsp = nested_vmcb->save.rsp;
 	svm->vmcb->save.rip = nested_vmcb->save.rip;
 	svm->vmcb->save.dr7 = nested_vmcb->save.dr7;
-	svm->vmcb->save.dr6 = nested_vmcb->save.dr6;
+	svm->vcpu.arch.dr6  = nested_vmcb->save.dr6;
 	svm->vmcb->save.cpl = nested_vmcb->save.cpl;
 
 	svm->nested.vmcb_msrpm = nested_vmcb->control.msrpm_base_pa & ~0x0fffULL;
@@ -482,7 +483,7 @@
 	nested_vmcb->save.rsp    = vmcb->save.rsp;
 	nested_vmcb->save.rax    = vmcb->save.rax;
 	nested_vmcb->save.dr7    = vmcb->save.dr7;
-	nested_vmcb->save.dr6    = vmcb->save.dr6;
+	nested_vmcb->save.dr6    = svm->vcpu.arch.dr6;
 	nested_vmcb->save.cpl    = vmcb->save.cpl;
 
 	nested_vmcb->control.int_ctl           = vmcb->control.int_ctl;
@@ -606,26 +607,45 @@
 /* DB exceptions for our internal use must not cause vmexit */
 static int nested_svm_intercept_db(struct vcpu_svm *svm)
 {
-	unsigned long dr6;
+	unsigned long dr6 = svm->vmcb->save.dr6;
+
+	/* Always catch it and pass it to userspace if debugging.  */
+	if (svm->vcpu.guest_debug &
+	    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
+		return NESTED_EXIT_HOST;
 
 	/* if we're not singlestepping, it's not ours */
 	if (!svm->nmi_singlestep)
-		return NESTED_EXIT_DONE;
+		goto reflected_db;
 
 	/* if it's not a singlestep exception, it's not ours */
-	if (kvm_get_dr(&svm->vcpu, 6, &dr6))
-		return NESTED_EXIT_DONE;
 	if (!(dr6 & DR6_BS))
-		return NESTED_EXIT_DONE;
+		goto reflected_db;
 
 	/* if the guest is singlestepping, it should get the vmexit */
 	if (svm->nmi_singlestep_guest_rflags & X86_EFLAGS_TF) {
 		disable_nmi_singlestep(svm);
-		return NESTED_EXIT_DONE;
+		goto reflected_db;
 	}
 
 	/* it's ours, the nested hypervisor must not see this one */
 	return NESTED_EXIT_HOST;
+
+reflected_db:
+	/*
+	 * Synchronize guest DR6 here just like in kvm_deliver_exception_payload;
+	 * it will be moved into the nested VMCB by nested_svm_vmexit.  Once
+	 * exceptions will be moved to svm_check_nested_events, all this stuff
+	 * will just go away and we could just return NESTED_EXIT_HOST
+	 * unconditionally.  db_interception will queue the exception, which
+	 * will be processed by svm_check_nested_events if a nested vmexit is
+	 * required, and we will just use kvm_deliver_exception_payload to copy
+	 * the payload to DR6 before vmexit.
+	 */
+	WARN_ON(svm->vcpu.arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT);
+	svm->vcpu.arch.dr6 &= ~(DR_TRAP_BITS | DR6_RTM);
+	svm->vcpu.arch.dr6 |= dr6 & ~DR6_FIXED_1;
+	return NESTED_EXIT_DONE;
 }
 
 static int nested_svm_intercept_ioio(struct vcpu_svm *svm)
@@ -682,6 +702,9 @@
 		if (svm->nested.intercept_exceptions & excp_bits) {
 			if (exit_code == SVM_EXIT_EXCP_BASE + DB_VECTOR)
 				vmexit = nested_svm_intercept_db(svm);
+			else if (exit_code == SVM_EXIT_EXCP_BASE + BP_VECTOR &&
+				 svm->vcpu.guest_debug & KVM_GUESTDBG_USE_SW_BP)
+				vmexit = NESTED_EXIT_HOST;
 			else
 				vmexit = NESTED_EXIT_DONE;
 		}
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 0e3fc31..89f7f3a 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/highmem.h>
 #include <linux/psp-sev.h>
+#include <linux/pagemap.h>
 #include <linux/swap.h>
 
 #include "x86.h"
@@ -344,7 +345,7 @@
 		return NULL;
 
 	/* Pin the user virtual address. */
-	npinned = get_user_pages_fast(uaddr, npages, FOLL_WRITE, pages);
+	npinned = get_user_pages_fast(uaddr, npages, write ? FOLL_WRITE : 0, pages);
 	if (npinned != npages) {
 		pr_err("SEV: Failure locking %lu pages.\n", npages);
 		goto err;
@@ -1117,7 +1118,7 @@
 	/* Maximum number of encrypted guests supported simultaneously */
 	max_sev_asid = cpuid_ecx(0x8000001F);
 
-	if (!max_sev_asid)
+	if (!svm_sev_enabled())
 		return 1;
 
 	/* Minimum ASID value that should be used for SEV guest */
@@ -1156,6 +1157,9 @@
 
 void sev_hardware_teardown(void)
 {
+	if (!svm_sev_enabled())
+		return;
+
 	bitmap_free(sev_asid_bitmap);
 	bitmap_free(sev_reclaim_asid_bitmap);
 
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 2be5bba..a862c76 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -1672,17 +1672,14 @@
 	mark_dirty(svm->vmcb, VMCB_ASID);
 }
 
-static u64 svm_get_dr6(struct kvm_vcpu *vcpu)
+static void svm_set_dr6(struct vcpu_svm *svm, unsigned long value)
 {
-	return to_svm(vcpu)->vmcb->save.dr6;
-}
+	struct vmcb *vmcb = svm->vmcb;
 
-static void svm_set_dr6(struct kvm_vcpu *vcpu, unsigned long value)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-
-	svm->vmcb->save.dr6 = value;
-	mark_dirty(svm->vmcb, VMCB_DR);
+	if (unlikely(value != vmcb->save.dr6)) {
+		vmcb->save.dr6 = value;
+		mark_dirty(vmcb, VMCB_DR);
+	}
 }
 
 static void svm_sync_dirty_debug_regs(struct kvm_vcpu *vcpu)
@@ -1693,9 +1690,12 @@
 	get_debugreg(vcpu->arch.db[1], 1);
 	get_debugreg(vcpu->arch.db[2], 2);
 	get_debugreg(vcpu->arch.db[3], 3);
-	vcpu->arch.dr6 = svm_get_dr6(vcpu);
+	/*
+	 * We cannot reset svm->vmcb->save.dr6 to DR6_FIXED_1|DR6_RTM here,
+	 * because db_interception might need it.  We can do it before vmentry.
+	 */
+	vcpu->arch.dr6 = svm->vmcb->save.dr6;
 	vcpu->arch.dr7 = svm->vmcb->save.dr7;
-
 	vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_WONT_EXIT;
 	set_dr_intercepts(svm);
 }
@@ -1739,7 +1739,8 @@
 	if (!(svm->vcpu.guest_debug &
 	      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) &&
 		!svm->nmi_singlestep) {
-		kvm_queue_exception(&svm->vcpu, DB_VECTOR);
+		u32 payload = (svm->vmcb->save.dr6 ^ DR6_RTM) & ~DR6_FIXED_1;
+		kvm_queue_exception_p(&svm->vcpu, DB_VECTOR, payload);
 		return 1;
 	}
 
@@ -1752,6 +1753,8 @@
 	if (svm->vcpu.guest_debug &
 	    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) {
 		kvm_run->exit_reason = KVM_EXIT_DEBUG;
+		kvm_run->debug.arch.dr6 = svm->vmcb->save.dr6;
+		kvm_run->debug.arch.dr7 = svm->vmcb->save.dr7;
 		kvm_run->debug.arch.pc =
 			svm->vmcb->save.cs.base + svm->vmcb->save.rip;
 		kvm_run->debug.arch.exception = DB_VECTOR;
@@ -3276,7 +3279,7 @@
 	svm_complete_interrupts(svm);
 }
 
-bool __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
+void __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
 
 static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 {
@@ -3315,6 +3318,15 @@
 
 	svm->vmcb->save.cr2 = vcpu->arch.cr2;
 
+	/*
+	 * Run with all-zero DR6 unless needed, so that we can get the exact cause
+	 * of a #DB.
+	 */
+	if (unlikely(svm->vcpu.arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT))
+		svm_set_dr6(svm, vcpu->arch.dr6);
+	else
+		svm_set_dr6(svm, DR6_FIXED_1 | DR6_RTM);
+
 	clgi();
 	kvm_load_guest_xsave_state(vcpu);
 
@@ -3330,13 +3342,8 @@
 	 */
 	x86_spec_ctrl_set_guest(svm->spec_ctrl, svm->virt_spec_ctrl);
 
-	local_irq_enable();
-
 	__svm_vcpu_run(svm->vmcb_pa, (unsigned long *)&svm->vcpu.arch.regs);
 
-	/* Eliminate branch target predictions from guest mode */
-	vmexit_fill_RSB();
-
 #ifdef CONFIG_X86_64
 	wrmsrl(MSR_GS_BASE, svm->host.gs_base);
 #else
@@ -3366,8 +3373,6 @@
 
 	reload_tss(vcpu);
 
-	local_irq_disable();
-
 	x86_spec_ctrl_restore_host(svm->spec_ctrl, svm->virt_spec_ctrl);
 
 	vcpu->arch.cr2 = svm->vmcb->save.cr2;
@@ -3411,7 +3416,6 @@
 
 	mark_all_clean(svm->vmcb);
 }
-STACK_FRAME_NON_STANDARD(svm_vcpu_run);
 
 static void svm_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long root)
 {
@@ -3937,8 +3941,6 @@
 	.set_idt = svm_set_idt,
 	.get_gdt = svm_get_gdt,
 	.set_gdt = svm_set_gdt,
-	.get_dr6 = svm_get_dr6,
-	.set_dr6 = svm_set_dr6,
 	.set_dr7 = svm_set_dr7,
 	.sync_dirty_debug_regs = svm_sync_dirty_debug_regs,
 	.cache_reg = svm_cache_reg,
diff --git a/arch/x86/kvm/svm/vmenter.S b/arch/x86/kvm/svm/vmenter.S
index fa1af90..bf94433 100644
--- a/arch/x86/kvm/svm/vmenter.S
+++ b/arch/x86/kvm/svm/vmenter.S
@@ -3,6 +3,7 @@
 #include <asm/asm.h>
 #include <asm/bitsperlong.h>
 #include <asm/kvm_vcpu_regs.h>
+#include <asm/nospec-branch.h>
 
 #define WORD_SIZE (BITS_PER_LONG / 8)
 
@@ -35,7 +36,6 @@
  */
 SYM_FUNC_START(__svm_vcpu_run)
 	push %_ASM_BP
-	mov  %_ASM_SP, %_ASM_BP
 #ifdef CONFIG_X86_64
 	push %r15
 	push %r14
@@ -78,6 +78,7 @@
 	pop %_ASM_AX
 
 	/* Enter guest mode */
+	sti
 1:	vmload %_ASM_AX
 	jmp 3f
 2:	cmpb $0, kvm_rebooting
@@ -99,6 +100,13 @@
 	ud2
 	_ASM_EXTABLE(5b, 6b)
 7:
+	cli
+
+#ifdef CONFIG_RETPOLINE
+	/* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */
+	FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
+#endif
+
 	/* "POP" @regs to RAX. */
 	pop %_ASM_AX
 
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index cbc9ea2..e44f33c 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -5165,7 +5165,7 @@
 	 */
 		break;
 	default:
-		BUG_ON(1);
+		BUG();
 		break;
 	}
 
@@ -5533,8 +5533,25 @@
 	return 1 & (b >> (field & 7));
 }
 
+static bool nested_vmx_exit_handled_mtf(struct vmcs12 *vmcs12)
+{
+	u32 entry_intr_info = vmcs12->vm_entry_intr_info_field;
+
+	if (nested_cpu_has_mtf(vmcs12))
+		return true;
+
+	/*
+	 * An MTF VM-exit may be injected into the guest by setting the
+	 * interruption-type to 7 (other event) and the vector field to 0. Such
+	 * is the case regardless of the 'monitor trap flag' VM-execution
+	 * control.
+	 */
+	return entry_intr_info == (INTR_INFO_VALID_MASK
+				   | INTR_TYPE_OTHER_EVENT);
+}
+
 /*
- * Return 1 if we should exit from L2 to L1 to handle an exit, or 0 if we
+ * Return true if we should exit from L2 to L1 to handle an exit, or false if we
  * should handle it ourselves in L0 (and then continue L2). Only call this
  * when in is_guest_mode (L2).
  */
@@ -5633,7 +5650,7 @@
 	case EXIT_REASON_MWAIT_INSTRUCTION:
 		return nested_cpu_has(vmcs12, CPU_BASED_MWAIT_EXITING);
 	case EXIT_REASON_MONITOR_TRAP_FLAG:
-		return nested_cpu_has_mtf(vmcs12);
+		return nested_vmx_exit_handled_mtf(vmcs12);
 	case EXIT_REASON_MONITOR_INSTRUCTION:
 		return nested_cpu_has(vmcs12, CPU_BASED_MONITOR_EXITING);
 	case EXIT_REASON_PAUSE_INSTRUCTION:
diff --git a/arch/x86/kvm/vmx/vmenter.S b/arch/x86/kvm/vmx/vmenter.S
index 87f3f24..51d1a82 100644
--- a/arch/x86/kvm/vmx/vmenter.S
+++ b/arch/x86/kvm/vmx/vmenter.S
@@ -82,6 +82,9 @@
 	/* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */
 	FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
 
+	/* Clear RFLAGS.CF and RFLAGS.ZF to preserve VM-Exit, i.e. !VM-Fail. */
+	or $1, %_ASM_AX
+
 	pop %_ASM_AX
 .Lvmexit_skip_rsb:
 #endif
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 8305097..89c766f 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -1372,7 +1372,6 @@
 
 	vmx_vcpu_pi_load(vcpu, cpu);
 
-	vmx->host_pkru = read_pkru();
 	vmx->host_debugctlmsr = get_debugctlmsr();
 }
 
@@ -4572,7 +4571,7 @@
  */
 static void kvm_machine_check(void)
 {
-#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_MCE)
 	struct pt_regs regs = {
 		.cs = 3, /* Fake ring 3 no matter what the guest ran on */
 		.flags = X86_EFLAGS_IF,
@@ -4677,15 +4676,13 @@
 		dr6 = vmcs_readl(EXIT_QUALIFICATION);
 		if (!(vcpu->guest_debug &
 		      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
-			vcpu->arch.dr6 &= ~DR_TRAP_BITS;
-			vcpu->arch.dr6 |= dr6 | DR6_RTM;
 			if (is_icebp(intr_info))
 				WARN_ON(!skip_emulated_instruction(vcpu));
 
-			kvm_queue_exception(vcpu, DB_VECTOR);
+			kvm_queue_exception_p(vcpu, DB_VECTOR, dr6);
 			return 1;
 		}
-		kvm_run->debug.arch.dr6 = dr6 | DR6_FIXED_1;
+		kvm_run->debug.arch.dr6 = dr6 | DR6_FIXED_1 | DR6_RTM;
 		kvm_run->debug.arch.dr7 = vmcs_readl(GUEST_DR7);
 		/* fall through */
 	case BP_VECTOR:
@@ -4929,16 +4926,14 @@
 		 * guest debugging itself.
 		 */
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
-			vcpu->run->debug.arch.dr6 = vcpu->arch.dr6;
+			vcpu->run->debug.arch.dr6 = DR6_BD | DR6_RTM | DR6_FIXED_1;
 			vcpu->run->debug.arch.dr7 = dr7;
 			vcpu->run->debug.arch.pc = kvm_get_linear_rip(vcpu);
 			vcpu->run->debug.arch.exception = DB_VECTOR;
 			vcpu->run->exit_reason = KVM_EXIT_DEBUG;
 			return 0;
 		} else {
-			vcpu->arch.dr6 &= ~DR_TRAP_BITS;
-			vcpu->arch.dr6 |= DR6_BD | DR6_RTM;
-			kvm_queue_exception(vcpu, DB_VECTOR);
+			kvm_queue_exception_p(vcpu, DB_VECTOR, DR6_BD);
 			return 1;
 		}
 	}
@@ -4969,15 +4964,6 @@
 	return kvm_skip_emulated_instruction(vcpu);
 }
 
-static u64 vmx_get_dr6(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.dr6;
-}
-
-static void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val)
-{
-}
-
 static void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu)
 {
 	get_debugreg(vcpu->arch.db[0], 0);
@@ -6577,11 +6563,6 @@
 
 	kvm_load_guest_xsave_state(vcpu);
 
-	if (static_cpu_has(X86_FEATURE_PKU) &&
-	    kvm_read_cr4_bits(vcpu, X86_CR4_PKE) &&
-	    vcpu->arch.pkru != vmx->host_pkru)
-		__write_pkru(vcpu->arch.pkru);
-
 	pt_guest_enter(vmx);
 
 	if (vcpu_to_pmu(vcpu)->version)
@@ -6671,18 +6652,6 @@
 
 	pt_guest_exit(vmx);
 
-	/*
-	 * eager fpu is enabled if PKEY is supported and CR4 is switched
-	 * back on host, so it is safe to read guest PKRU from current
-	 * XSAVE.
-	 */
-	if (static_cpu_has(X86_FEATURE_PKU) &&
-	    kvm_read_cr4_bits(vcpu, X86_CR4_PKE)) {
-		vcpu->arch.pkru = rdpkru();
-		if (vcpu->arch.pkru != vmx->host_pkru)
-			__write_pkru(vmx->host_pkru);
-	}
-
 	kvm_load_host_xsave_state(vcpu);
 
 	vmx->nested.nested_run_pending = 0;
@@ -7740,8 +7709,6 @@
 	.set_idt = vmx_set_idt,
 	.get_gdt = vmx_get_gdt,
 	.set_gdt = vmx_set_gdt,
-	.get_dr6 = vmx_get_dr6,
-	.set_dr6 = vmx_set_dr6,
 	.set_dr7 = vmx_set_dr7,
 	.sync_dirty_debug_regs = vmx_sync_dirty_debug_regs,
 	.cache_reg = vmx_cache_reg,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3bf2eca..c17e6eb 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -572,11 +572,12 @@
 }
 EXPORT_SYMBOL_GPL(kvm_requeue_exception);
 
-static void kvm_queue_exception_p(struct kvm_vcpu *vcpu, unsigned nr,
-				  unsigned long payload)
+void kvm_queue_exception_p(struct kvm_vcpu *vcpu, unsigned nr,
+			   unsigned long payload)
 {
 	kvm_multiple_exception(vcpu, nr, false, 0, true, payload, false);
 }
+EXPORT_SYMBOL_GPL(kvm_queue_exception_p);
 
 static void kvm_queue_exception_e_p(struct kvm_vcpu *vcpu, unsigned nr,
 				    u32 error_code, unsigned long payload)
@@ -836,11 +837,25 @@
 		    vcpu->arch.ia32_xss != host_xss)
 			wrmsrl(MSR_IA32_XSS, vcpu->arch.ia32_xss);
 	}
+
+	if (static_cpu_has(X86_FEATURE_PKU) &&
+	    (kvm_read_cr4_bits(vcpu, X86_CR4_PKE) ||
+	     (vcpu->arch.xcr0 & XFEATURE_MASK_PKRU)) &&
+	    vcpu->arch.pkru != vcpu->arch.host_pkru)
+		__write_pkru(vcpu->arch.pkru);
 }
 EXPORT_SYMBOL_GPL(kvm_load_guest_xsave_state);
 
 void kvm_load_host_xsave_state(struct kvm_vcpu *vcpu)
 {
+	if (static_cpu_has(X86_FEATURE_PKU) &&
+	    (kvm_read_cr4_bits(vcpu, X86_CR4_PKE) ||
+	     (vcpu->arch.xcr0 & XFEATURE_MASK_PKRU))) {
+		vcpu->arch.pkru = rdpkru();
+		if (vcpu->arch.pkru != vcpu->arch.host_pkru)
+			__write_pkru(vcpu->arch.host_pkru);
+	}
+
 	if (kvm_read_cr4_bits(vcpu, X86_CR4_OSXSAVE)) {
 
 		if (vcpu->arch.xcr0 != host_xcr0)
@@ -926,19 +941,6 @@
 	__reserved_bits;				\
 })
 
-static u64 kvm_host_cr4_reserved_bits(struct cpuinfo_x86 *c)
-{
-	u64 reserved_bits = __cr4_reserved_bits(cpu_has, c);
-
-	if (kvm_cpu_cap_has(X86_FEATURE_LA57))
-		reserved_bits &= ~X86_CR4_LA57;
-
-	if (kvm_cpu_cap_has(X86_FEATURE_UMIP))
-		reserved_bits &= ~X86_CR4_UMIP;
-
-	return reserved_bits;
-}
-
 static int kvm_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	if (cr4 & cr4_reserved_bits)
@@ -1058,12 +1060,6 @@
 	}
 }
 
-static void kvm_update_dr6(struct kvm_vcpu *vcpu)
-{
-	if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP))
-		kvm_x86_ops.set_dr6(vcpu, vcpu->arch.dr6);
-}
-
 static void kvm_update_dr7(struct kvm_vcpu *vcpu)
 {
 	unsigned long dr7;
@@ -1103,7 +1099,6 @@
 		if (val & 0xffffffff00000000ULL)
 			return -1; /* #GP */
 		vcpu->arch.dr6 = (val & DR6_VOLATILE) | kvm_dr6_fixed(vcpu);
-		kvm_update_dr6(vcpu);
 		break;
 	case 5:
 		/* fall through */
@@ -1139,10 +1134,7 @@
 	case 4:
 		/* fall through */
 	case 6:
-		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
-			*val = vcpu->arch.dr6;
-		else
-			*val = kvm_x86_ops.get_dr6(vcpu);
+		*val = vcpu->arch.dr6;
 		break;
 	case 5:
 		/* fall through */
@@ -3060,6 +3052,17 @@
 	case MSR_IA32_PERF_CTL:
 	case MSR_AMD64_DC_CFG:
 	case MSR_F15H_EX_CFG:
+	/*
+	 * Intel Sandy Bridge CPUs must support the RAPL (running average power
+	 * limit) MSRs. Just return 0, as we do not want to expose the host
+	 * data here. Do not conditionalize this on CPUID, as KVM does not do
+	 * so for existing CPU-specific MSRs.
+	 */
+	case MSR_RAPL_POWER_UNIT:
+	case MSR_PP0_ENERGY_STATUS:	/* Power plane 0 (core) */
+	case MSR_PP1_ENERGY_STATUS:	/* Power plane 1 (graphics uncore) */
+	case MSR_PKG_ENERGY_STATUS:	/* Total package */
+	case MSR_DRAM_ENERGY_STATUS:	/* DRAM controller */
 		msr_info->data = 0;
 		break;
 	case MSR_F15H_PERF_CTL0 ... MSR_F15H_PERF_CTR5:
@@ -3374,6 +3377,7 @@
 	case KVM_CAP_GET_MSR_FEATURES:
 	case KVM_CAP_MSR_PLATFORM_INFO:
 	case KVM_CAP_EXCEPTION_PAYLOAD:
+	case KVM_CAP_SET_GUEST_DEBUG:
 		r = 1;
 		break;
 	case KVM_CAP_SYNC_REGS:
@@ -3559,6 +3563,9 @@
 
 	kvm_x86_ops.vcpu_load(vcpu, cpu);
 
+	/* Save host pkru register if supported */
+	vcpu->arch.host_pkru = read_pkru();
+
 	/* Apply any externally detected TSC adjustments (due to suspend) */
 	if (unlikely(vcpu->arch.tsc_offset_adjustment)) {
 		adjust_tsc_offset_host(vcpu, vcpu->arch.tsc_offset_adjustment);
@@ -3752,7 +3759,7 @@
 	unsigned bank_num = mcg_cap & 0xff, bank;
 
 	r = -EINVAL;
-	if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS)
+	if (!bank_num || bank_num > KVM_MAX_MCE_BANKS)
 		goto out;
 	if (mcg_cap & ~(kvm_mce_cap_supported | 0xff | 0xff0000))
 		goto out;
@@ -4010,7 +4017,6 @@
 	memcpy(vcpu->arch.db, dbgregs->db, sizeof(vcpu->arch.db));
 	kvm_update_dr0123(vcpu);
 	vcpu->arch.dr6 = dbgregs->dr6;
-	kvm_update_dr6(vcpu);
 	vcpu->arch.dr7 = dbgregs->dr7;
 	kvm_update_dr7(vcpu);
 
@@ -5049,10 +5055,13 @@
 		r = -EFAULT;
 		if (copy_from_user(&u.ps, argp, sizeof(u.ps)))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit_out;
 		r = kvm_vm_ioctl_set_pit(kvm, &u.ps);
+set_pit_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_GET_PIT2: {
@@ -5072,10 +5081,13 @@
 		r = -EFAULT;
 		if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit2_out;
 		r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+set_pit2_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_REINJECT_CONTROL: {
@@ -6654,7 +6666,7 @@
 
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
 		kvm_run->debug.arch.dr6 = DR6_BS | DR6_FIXED_1 | DR6_RTM;
-		kvm_run->debug.arch.pc = vcpu->arch.singlestep_rip;
+		kvm_run->debug.arch.pc = kvm_get_linear_rip(vcpu);
 		kvm_run->debug.arch.exception = DB_VECTOR;
 		kvm_run->exit_reason = KVM_EXIT_DEBUG;
 		return 0;
@@ -6714,9 +6726,7 @@
 					   vcpu->arch.db);
 
 		if (dr6 != 0) {
-			vcpu->arch.dr6 &= ~DR_TRAP_BITS;
-			vcpu->arch.dr6 |= dr6 | DR6_RTM;
-			kvm_queue_exception(vcpu, DB_VECTOR);
+			kvm_queue_exception_p(vcpu, DB_VECTOR, dr6);
 			*r = 1;
 			return true;
 		}
@@ -8037,7 +8047,7 @@
 	zalloc_cpumask_var(&cpus, GFP_ATOMIC);
 
 	kvm_make_vcpus_request_mask(kvm, KVM_REQ_SCAN_IOAPIC,
-				    vcpu_bitmap, cpus);
+				    NULL, vcpu_bitmap, cpus);
 
 	free_cpumask_var(cpus);
 }
@@ -8067,6 +8077,7 @@
  */
 void kvm_request_apicv_update(struct kvm *kvm, bool activate, ulong bit)
 {
+	struct kvm_vcpu *except;
 	unsigned long old, new, expected;
 
 	if (!kvm_x86_ops.check_apicv_inhibit_reasons ||
@@ -8091,7 +8102,17 @@
 	trace_kvm_apicv_update_request(activate, bit);
 	if (kvm_x86_ops.pre_update_apicv_exec_ctrl)
 		kvm_x86_ops.pre_update_apicv_exec_ctrl(kvm, activate);
-	kvm_make_all_cpus_request(kvm, KVM_REQ_APICV_UPDATE);
+
+	/*
+	 * Sending request to update APICV for all other vcpus,
+	 * while update the calling vcpu immediately instead of
+	 * waiting for another #VMEXIT to handle the request.
+	 */
+	except = kvm_get_running_vcpu();
+	kvm_make_all_cpus_request_except(kvm, KVM_REQ_APICV_UPDATE,
+					 except);
+	if (except)
+		kvm_vcpu_update_apicv(except);
 }
 EXPORT_SYMBOL_GPL(kvm_request_apicv_update);
 
@@ -8415,7 +8436,6 @@
 		WARN_ON(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP);
 		kvm_x86_ops.sync_dirty_debug_regs(vcpu);
 		kvm_update_dr0123(vcpu);
-		kvm_update_dr6(vcpu);
 		kvm_update_dr7(vcpu);
 		vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD;
 	}
@@ -9476,7 +9496,6 @@
 	memset(vcpu->arch.db, 0, sizeof(vcpu->arch.db));
 	kvm_update_dr0123(vcpu);
 	vcpu->arch.dr6 = DR6_INIT;
-	kvm_update_dr6(vcpu);
 	vcpu->arch.dr7 = DR7_FIXED_1;
 	kvm_update_dr7(vcpu);
 
@@ -9658,7 +9677,9 @@
 	if (!kvm_cpu_cap_has(X86_FEATURE_XSAVES))
 		supported_xss = 0;
 
-	cr4_reserved_bits = kvm_host_cr4_reserved_bits(&boot_cpu_data);
+#define __kvm_cpu_cap_has(UNUSED_, f) kvm_cpu_cap_has(f)
+	cr4_reserved_bits = __cr4_reserved_bits(__kvm_cpu_cap_has, UNUSED_);
+#undef __kvm_cpu_cap_has
 
 	if (kvm_has_tsc_control) {
 		/*
@@ -9690,7 +9711,8 @@
 
 	WARN_ON(!irqs_disabled());
 
-	if (kvm_host_cr4_reserved_bits(c) != cr4_reserved_bits)
+	if (__cr4_reserved_bits(cpu_has, c) !=
+	    __cr4_reserved_bits(cpu_has, &boot_cpu_data))
 		return -EIO;
 
 	return ops->check_processor_compatibility();
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 3b289c2..8b5f73f 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -54,6 +54,7 @@
 #include <asm/init.h>
 #include <asm/uv/uv.h>
 #include <asm/setup.h>
+#include <asm/ftrace.h>
 
 #include "mm_internal.h"
 
@@ -1291,6 +1292,8 @@
 	all_end = roundup((unsigned long)_brk_end, PMD_SIZE);
 	set_memory_nx(text_end, (all_end - text_end) >> PAGE_SHIFT);
 
+	set_ftrace_ops_ro();
+
 #ifdef CONFIG_CPA_DEBUG
 	printk(KERN_INFO "Testing CPA: undo %lx-%lx\n", start, end);
 	set_memory_rw(start, (end-start) >> PAGE_SHIFT);
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index 59eca6a..b8c55a2 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -43,7 +43,8 @@
 	unsigned long	pfn;
 	unsigned int	flags;
 	unsigned int	force_split		: 1,
-			force_static_prot	: 1;
+			force_static_prot	: 1,
+			force_flush_all		: 1;
 	struct page	**pages;
 };
 
@@ -355,10 +356,10 @@
 		return;
 	}
 
-	if (cpa->numpages <= tlb_single_page_flush_ceiling)
-		on_each_cpu(__cpa_flush_tlb, cpa, 1);
-	else
+	if (cpa->force_flush_all || cpa->numpages > tlb_single_page_flush_ceiling)
 		flush_tlb_all();
+	else
+		on_each_cpu(__cpa_flush_tlb, cpa, 1);
 
 	if (!cache)
 		return;
@@ -1598,6 +1599,8 @@
 		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 		alias_cpa.curpage = 0;
 
+		cpa->force_flush_all = 1;
+
 		ret = __change_page_attr_set_clr(&alias_cpa, 0);
 		if (ret)
 			return ret;
@@ -1618,6 +1621,7 @@
 		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 		alias_cpa.curpage = 0;
 
+		cpa->force_flush_all = 1;
 		/*
 		 * The high mapping range is imprecise, so ignore the
 		 * return value.
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 5ea7c2c..42b6709e 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -158,6 +158,19 @@
 			     BIT(BPF_REG_AX));
 }
 
+/*
+ * is_ereg_8l() == true if BPF register 'reg' is mapped to access x86-64
+ * lower 8-bit registers dil,sil,bpl,spl,r8b..r15b, which need extra byte
+ * of encoding. al,cl,dl,bl have simpler encoding.
+ */
+static bool is_ereg_8l(u32 reg)
+{
+	return is_ereg(reg) ||
+	    (1 << reg) & (BIT(BPF_REG_1) |
+			  BIT(BPF_REG_2) |
+			  BIT(BPF_REG_FP));
+}
+
 static bool is_axreg(u32 reg)
 {
 	return reg == BPF_REG_0;
@@ -598,9 +611,8 @@
 	switch (size) {
 	case BPF_B:
 		/* Emit 'mov byte ptr [rax + off], al' */
-		if (is_ereg(dst_reg) || is_ereg(src_reg) ||
-		    /* We have to add extra byte for x86 SIL, DIL regs */
-		    src_reg == BPF_REG_1 || src_reg == BPF_REG_2)
+		if (is_ereg(dst_reg) || is_ereg_8l(src_reg))
+			/* Add extra byte for eregs or SIL,DIL,BPL in src_reg */
 			EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x88);
 		else
 			EMIT1(0x88);
diff --git a/arch/x86/net/bpf_jit_comp32.c b/arch/x86/net/bpf_jit_comp32.c
index 4d2a7a7..66cd150 100644
--- a/arch/x86/net/bpf_jit_comp32.c
+++ b/arch/x86/net/bpf_jit_comp32.c
@@ -1847,14 +1847,16 @@
 			case BPF_B:
 			case BPF_H:
 			case BPF_W:
-				if (!bpf_prog->aux->verifier_zext)
+				if (bpf_prog->aux->verifier_zext)
 					break;
 				if (dstk) {
 					EMIT3(0xC7, add_1reg(0x40, IA32_EBP),
 					      STACK_VAR(dst_hi));
 					EMIT(0x0, 4);
 				} else {
-					EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);
+					/* xor dst_hi,dst_hi */
+					EMIT2(0x33,
+					      add_2reg(0xC0, dst_hi, dst_hi));
 				}
 				break;
 			case BPF_DW:
@@ -2013,8 +2015,8 @@
 		case BPF_JMP | BPF_JSET | BPF_X:
 		case BPF_JMP32 | BPF_JSET | BPF_X: {
 			bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
-			u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
-			u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+			u8 dreg_lo = IA32_EAX;
+			u8 dreg_hi = IA32_EDX;
 			u8 sreg_lo = sstk ? IA32_ECX : src_lo;
 			u8 sreg_hi = sstk ? IA32_EBX : src_hi;
 
@@ -2026,6 +2028,13 @@
 					      add_2reg(0x40, IA32_EBP,
 						       IA32_EDX),
 					      STACK_VAR(dst_hi));
+			} else {
+				/* mov dreg_lo,dst_lo */
+				EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+				if (is_jmp64)
+					/* mov dreg_hi,dst_hi */
+					EMIT2(0x89,
+					      add_2reg(0xC0, dreg_hi, dst_hi));
 			}
 
 			if (sstk) {
@@ -2050,8 +2059,8 @@
 		case BPF_JMP | BPF_JSET | BPF_K:
 		case BPF_JMP32 | BPF_JSET | BPF_K: {
 			bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
-			u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
-			u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+			u8 dreg_lo = IA32_EAX;
+			u8 dreg_hi = IA32_EDX;
 			u8 sreg_lo = IA32_ECX;
 			u8 sreg_hi = IA32_EBX;
 			u32 hi;
@@ -2064,6 +2073,13 @@
 					      add_2reg(0x40, IA32_EBP,
 						       IA32_EDX),
 					      STACK_VAR(dst_hi));
+			} else {
+				/* mov dreg_lo,dst_lo */
+				EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+				if (is_jmp64)
+					/* mov dreg_hi,dst_hi */
+					EMIT2(0x89,
+					      add_2reg(0xC0, dreg_hi, dst_hi));
 			}
 
 			/* mov ecx,imm32 */
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 211bb93..c5e393f 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -202,7 +202,7 @@
 
 int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 {
-	unsigned long pfn, text, pf;
+	unsigned long pfn, text, pf, rodata;
 	struct page *page;
 	unsigned npages;
 	pgd_t *pgd = efi_mm.pgd;
@@ -256,7 +256,7 @@
 
 	efi_scratch.phys_stack = page_to_phys(page + 1); /* stack grows down */
 
-	npages = (__end_rodata_aligned - _text) >> PAGE_SHIFT;
+	npages = (_etext - _text) >> PAGE_SHIFT;
 	text = __pa(_text);
 	pfn = text >> PAGE_SHIFT;
 
@@ -266,6 +266,14 @@
 		return 1;
 	}
 
+	npages = (__end_rodata - __start_rodata) >> PAGE_SHIFT;
+	rodata = __pa(__start_rodata);
+	pfn = rodata >> PAGE_SHIFT;
+	if (kernel_map_pages_in_pgd(pgd, pfn, rodata, npages, pf)) {
+		pr_err("Failed to map kernel rodata 1:1\n");
+		return 1;
+	}
+
 	return 0;
 }
 
@@ -638,7 +646,7 @@
 	phys_vendor = virt_to_phys_or_null(vnd);
 	phys_data = virt_to_phys_or_null_size(data, data_size);
 
-	if (!phys_name || !phys_data)
+	if (!phys_name || (data && !phys_data))
 		status = EFI_INVALID_PARAMETER;
 	else
 		status = efi_thunk(set_variable, phys_name, phys_vendor,
@@ -669,7 +677,7 @@
 	phys_vendor = virt_to_phys_or_null(vnd);
 	phys_data = virt_to_phys_or_null_size(data, data_size);
 
-	if (!phys_name || !phys_data)
+	if (!phys_name || (data && !phys_data))
 		status = EFI_INVALID_PARAMETER;
 	else
 		status = efi_thunk(set_variable, phys_name, phys_vendor,
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 8fb8a50..f2adb63 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -93,6 +93,7 @@
 	cpu_bringup();
 	boot_init_stack_canary();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+	prevent_tail_call_optimization();
 }
 
 void xen_smp_intr_free_pv(unsigned int cpu)
diff --git a/arch/xtensa/include/asm/module.h b/arch/xtensa/include/asm/module.h
deleted file mode 100644
index 488b40c..0000000
--- a/arch/xtensa/include/asm/module.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-xtensa/module.h
- *
- * This file contains the module code specific to the Xtensa architecture.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_MODULE_H
-#define _XTENSA_MODULE_H
-
-#define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " "
-
-#include <asm-generic/module.h>
-
-#endif	/* _XTENSA_MODULE_H */
diff --git a/arch/xtensa/include/asm/vermagic.h b/arch/xtensa/include/asm/vermagic.h
new file mode 100644
index 0000000..6d9c670
--- /dev/null
+++ b/arch/xtensa/include/asm/vermagic.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+#include <variant/core.h>
+
+#define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " "
+
+#endif	/* _ASM_VERMAGIC_H */
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 78ba57e..3d411716 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -123,6 +123,7 @@
 #include <linux/ioprio.h>
 #include <linux/sbitmap.h>
 #include <linux/delay.h>
+#include <linux/backing-dev.h>
 
 #include "blk.h"
 #include "blk-mq.h"
@@ -4976,8 +4977,9 @@
 	ioprio_class = IOPRIO_PRIO_CLASS(bic->ioprio);
 	switch (ioprio_class) {
 	default:
-		dev_err(bfqq->bfqd->queue->backing_dev_info->dev,
-			"bfq: bad prio class %d\n", ioprio_class);
+		pr_err("bdi %s: bfq: bad prio class %d\n",
+				bdi_dev_name(bfqq->bfqd->queue->backing_dev_info),
+				ioprio_class);
 		/* fall through */
 	case IOPRIO_CLASS_NONE:
 		/*
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index c5dc833..930212c 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -496,7 +496,7 @@
 {
 	/* some drivers (floppy) instantiate a queue w/o disk registered */
 	if (blkg->q->backing_dev_info->dev)
-		return dev_name(blkg->q->backing_dev_info->dev);
+		return bdi_dev_name(blkg->q->backing_dev_info);
 	return NULL;
 }
 
diff --git a/block/blk-iocost.c b/block/blk-iocost.c
index db35ee6..7c1fe60 100644
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -466,7 +466,7 @@
 	 */
 	atomic64_t			vtime;
 	atomic64_t			done_vtime;
-	atomic64_t			abs_vdebt;
+	u64				abs_vdebt;
 	u64				last_vtime;
 
 	/*
@@ -1142,7 +1142,7 @@
 	struct iocg_wake_ctx ctx = { .iocg = iocg };
 	u64 margin_ns = (u64)(ioc->period_us *
 			      WAITQ_TIMER_MARGIN_PCT / 100) * NSEC_PER_USEC;
-	u64 abs_vdebt, vdebt, vshortage, expires, oexpires;
+	u64 vdebt, vshortage, expires, oexpires;
 	s64 vbudget;
 	u32 hw_inuse;
 
@@ -1152,18 +1152,15 @@
 	vbudget = now->vnow - atomic64_read(&iocg->vtime);
 
 	/* pay off debt */
-	abs_vdebt = atomic64_read(&iocg->abs_vdebt);
-	vdebt = abs_cost_to_cost(abs_vdebt, hw_inuse);
+	vdebt = abs_cost_to_cost(iocg->abs_vdebt, hw_inuse);
 	if (vdebt && vbudget > 0) {
 		u64 delta = min_t(u64, vbudget, vdebt);
 		u64 abs_delta = min(cost_to_abs_cost(delta, hw_inuse),
-				    abs_vdebt);
+				    iocg->abs_vdebt);
 
 		atomic64_add(delta, &iocg->vtime);
 		atomic64_add(delta, &iocg->done_vtime);
-		atomic64_sub(abs_delta, &iocg->abs_vdebt);
-		if (WARN_ON_ONCE(atomic64_read(&iocg->abs_vdebt) < 0))
-			atomic64_set(&iocg->abs_vdebt, 0);
+		iocg->abs_vdebt -= abs_delta;
 	}
 
 	/*
@@ -1219,12 +1216,18 @@
 	u64 expires, oexpires;
 	u32 hw_inuse;
 
+	lockdep_assert_held(&iocg->waitq.lock);
+
 	/* debt-adjust vtime */
 	current_hweight(iocg, NULL, &hw_inuse);
-	vtime += abs_cost_to_cost(atomic64_read(&iocg->abs_vdebt), hw_inuse);
+	vtime += abs_cost_to_cost(iocg->abs_vdebt, hw_inuse);
 
-	/* clear or maintain depending on the overage */
-	if (time_before_eq64(vtime, now->vnow)) {
+	/*
+	 * Clear or maintain depending on the overage. Non-zero vdebt is what
+	 * guarantees that @iocg is online and future iocg_kick_delay() will
+	 * clear use_delay. Don't leave it on when there's no vdebt.
+	 */
+	if (!iocg->abs_vdebt || time_before_eq64(vtime, now->vnow)) {
 		blkcg_clear_delay(blkg);
 		return false;
 	}
@@ -1258,9 +1261,12 @@
 {
 	struct ioc_gq *iocg = container_of(timer, struct ioc_gq, delay_timer);
 	struct ioc_now now;
+	unsigned long flags;
 
+	spin_lock_irqsave(&iocg->waitq.lock, flags);
 	ioc_now(iocg->ioc, &now);
 	iocg_kick_delay(iocg, &now, 0);
+	spin_unlock_irqrestore(&iocg->waitq.lock, flags);
 
 	return HRTIMER_NORESTART;
 }
@@ -1368,14 +1374,13 @@
 	 * should have woken up in the last period and expire idle iocgs.
 	 */
 	list_for_each_entry_safe(iocg, tiocg, &ioc->active_iocgs, active_list) {
-		if (!waitqueue_active(&iocg->waitq) &&
-		    !atomic64_read(&iocg->abs_vdebt) && !iocg_is_idle(iocg))
+		if (!waitqueue_active(&iocg->waitq) && iocg->abs_vdebt &&
+		    !iocg_is_idle(iocg))
 			continue;
 
 		spin_lock(&iocg->waitq.lock);
 
-		if (waitqueue_active(&iocg->waitq) ||
-		    atomic64_read(&iocg->abs_vdebt)) {
+		if (waitqueue_active(&iocg->waitq) || iocg->abs_vdebt) {
 			/* might be oversleeping vtime / hweight changes, kick */
 			iocg_kick_waitq(iocg, &now);
 			iocg_kick_delay(iocg, &now, 0);
@@ -1591,7 +1596,7 @@
 				      vrate_min, vrate_max);
 		}
 
-		trace_iocost_ioc_vrate_adj(ioc, vrate, &missed_ppm, rq_wait_pct,
+		trace_iocost_ioc_vrate_adj(ioc, vrate, missed_ppm, rq_wait_pct,
 					   nr_lagging, nr_shortages,
 					   nr_surpluses);
 
@@ -1600,7 +1605,7 @@
 			ioc->period_us * vrate * INUSE_MARGIN_PCT, 100);
 	} else if (ioc->busy_level != prev_busy_level || nr_lagging) {
 		trace_iocost_ioc_vrate_adj(ioc, atomic64_read(&ioc->vtime_rate),
-					   &missed_ppm, rq_wait_pct, nr_lagging,
+					   missed_ppm, rq_wait_pct, nr_lagging,
 					   nr_shortages, nr_surpluses);
 	}
 
@@ -1718,28 +1723,49 @@
 	 * tests are racy but the races aren't systemic - we only miss once
 	 * in a while which is fine.
 	 */
-	if (!waitqueue_active(&iocg->waitq) &&
-	    !atomic64_read(&iocg->abs_vdebt) &&
+	if (!waitqueue_active(&iocg->waitq) && !iocg->abs_vdebt &&
 	    time_before_eq64(vtime + cost, now.vnow)) {
 		iocg_commit_bio(iocg, bio, cost);
 		return;
 	}
 
 	/*
-	 * We're over budget.  If @bio has to be issued regardless,
-	 * remember the abs_cost instead of advancing vtime.
-	 * iocg_kick_waitq() will pay off the debt before waking more IOs.
+	 * We activated above but w/o any synchronization. Deactivation is
+	 * synchronized with waitq.lock and we won't get deactivated as long
+	 * as we're waiting or has debt, so we're good if we're activated
+	 * here. In the unlikely case that we aren't, just issue the IO.
+	 */
+	spin_lock_irq(&iocg->waitq.lock);
+
+	if (unlikely(list_empty(&iocg->active_list))) {
+		spin_unlock_irq(&iocg->waitq.lock);
+		iocg_commit_bio(iocg, bio, cost);
+		return;
+	}
+
+	/*
+	 * We're over budget. If @bio has to be issued regardless, remember
+	 * the abs_cost instead of advancing vtime. iocg_kick_waitq() will pay
+	 * off the debt before waking more IOs.
+	 *
 	 * This way, the debt is continuously paid off each period with the
-	 * actual budget available to the cgroup.  If we just wound vtime,
-	 * we would incorrectly use the current hw_inuse for the entire
-	 * amount which, for example, can lead to the cgroup staying
-	 * blocked for a long time even with substantially raised hw_inuse.
+	 * actual budget available to the cgroup. If we just wound vtime, we
+	 * would incorrectly use the current hw_inuse for the entire amount
+	 * which, for example, can lead to the cgroup staying blocked for a
+	 * long time even with substantially raised hw_inuse.
+	 *
+	 * An iocg with vdebt should stay online so that the timer can keep
+	 * deducting its vdebt and [de]activate use_delay mechanism
+	 * accordingly. We don't want to race against the timer trying to
+	 * clear them and leave @iocg inactive w/ dangling use_delay heavily
+	 * penalizing the cgroup and its descendants.
 	 */
 	if (bio_issue_as_root_blkg(bio) || fatal_signal_pending(current)) {
-		atomic64_add(abs_cost, &iocg->abs_vdebt);
+		iocg->abs_vdebt += abs_cost;
 		if (iocg_kick_delay(iocg, &now, cost))
 			blkcg_schedule_throttle(rqos->q,
 					(bio->bi_opf & REQ_SWAP) == REQ_SWAP);
+		spin_unlock_irq(&iocg->waitq.lock);
 		return;
 	}
 
@@ -1756,20 +1782,6 @@
 	 * All waiters are on iocg->waitq and the wait states are
 	 * synchronized using waitq.lock.
 	 */
-	spin_lock_irq(&iocg->waitq.lock);
-
-	/*
-	 * We activated above but w/o any synchronization.  Deactivation is
-	 * synchronized with waitq.lock and we won't get deactivated as
-	 * long as we're waiting, so we're good if we're activated here.
-	 * In the unlikely case that we are deactivated, just issue the IO.
-	 */
-	if (unlikely(list_empty(&iocg->active_list))) {
-		spin_unlock_irq(&iocg->waitq.lock);
-		iocg_commit_bio(iocg, bio, cost);
-		return;
-	}
-
 	init_waitqueue_func_entry(&wait.wait, iocg_wake_fn);
 	wait.wait.private = current;
 	wait.bio = bio;
@@ -1801,6 +1813,7 @@
 	struct ioc_now now;
 	u32 hw_inuse;
 	u64 abs_cost, cost;
+	unsigned long flags;
 
 	/* bypass if disabled or for root cgroup */
 	if (!ioc->enabled || !iocg->level)
@@ -1820,15 +1833,28 @@
 		iocg->cursor = bio_end;
 
 	/*
-	 * Charge if there's enough vtime budget and the existing request
-	 * has cost assigned.  Otherwise, account it as debt.  See debt
-	 * handling in ioc_rqos_throttle() for details.
+	 * Charge if there's enough vtime budget and the existing request has
+	 * cost assigned.
 	 */
 	if (rq->bio && rq->bio->bi_iocost_cost &&
-	    time_before_eq64(atomic64_read(&iocg->vtime) + cost, now.vnow))
+	    time_before_eq64(atomic64_read(&iocg->vtime) + cost, now.vnow)) {
 		iocg_commit_bio(iocg, bio, cost);
-	else
-		atomic64_add(abs_cost, &iocg->abs_vdebt);
+		return;
+	}
+
+	/*
+	 * Otherwise, account it as debt if @iocg is online, which it should
+	 * be for the vast majority of cases. See debt handling in
+	 * ioc_rqos_throttle() for details.
+	 */
+	spin_lock_irqsave(&iocg->waitq.lock, flags);
+	if (likely(!list_empty(&iocg->active_list))) {
+		iocg->abs_vdebt += abs_cost;
+		iocg_kick_delay(iocg, &now, cost);
+	} else {
+		iocg_commit_bio(iocg, bio, cost);
+	}
+	spin_unlock_irqrestore(&iocg->waitq.lock, flags);
 }
 
 static void ioc_rqos_done_bio(struct rq_qos *rqos, struct bio *bio)
@@ -1998,7 +2024,6 @@
 	iocg->ioc = ioc;
 	atomic64_set(&iocg->vtime, now.vnow);
 	atomic64_set(&iocg->done_vtime, now.vnow);
-	atomic64_set(&iocg->abs_vdebt, 0);
 	atomic64_set(&iocg->active_period, atomic64_read(&ioc->cur_period));
 	INIT_LIST_HEAD(&iocg->active_list);
 	iocg->hweight_active = HWEIGHT_WHOLE;
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 8e56884..a7785df 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1222,8 +1222,10 @@
 		rq = list_first_entry(list, struct request, queuelist);
 
 		hctx = rq->mq_hctx;
-		if (!got_budget && !blk_mq_get_dispatch_budget(hctx))
+		if (!got_budget && !blk_mq_get_dispatch_budget(hctx)) {
+			blk_mq_put_driver_tag(rq);
 			break;
+		}
 
 		if (!blk_mq_get_driver_tag(rq)) {
 			/*
diff --git a/block/blk-wbt.c b/block/blk-wbt.c
index 8641ba9..9cb082f 100644
--- a/block/blk-wbt.c
+++ b/block/blk-wbt.c
@@ -313,7 +313,7 @@
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
 	rwb_wake_all(rwb);
-	rwb_trace_step(rwb, "scale up");
+	rwb_trace_step(rwb, tracepoint_string("scale up"));
 }
 
 static void scale_down(struct rq_wb *rwb, bool hard_throttle)
@@ -322,7 +322,7 @@
 		return;
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
-	rwb_trace_step(rwb, "scale down");
+	rwb_trace_step(rwb, tracepoint_string("scale down"));
 }
 
 static void rwb_arm_timer(struct rq_wb *rwb)
diff --git a/block/partitions/core.c b/block/partitions/core.c
index bc1ded1..9ef48a8 100644
--- a/block/partitions/core.c
+++ b/block/partitions/core.c
@@ -496,7 +496,7 @@
 
 	if (!disk_part_scan_enabled(disk))
 		return 0;
-	if (bdev->bd_part_count || bdev->bd_openers > 1)
+	if (bdev->bd_part_count)
 		return -EBUSY;
 	res = invalidate_partition(disk, 0);
 	if (res)
diff --git a/crypto/lrw.c b/crypto/lrw.c
index 376d7ed..3c734b8 100644
--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -287,7 +287,7 @@
 	crypto_free_skcipher(ctx->child);
 }
 
-static void free(struct skcipher_instance *inst)
+static void free_inst(struct skcipher_instance *inst)
 {
 	crypto_drop_skcipher(skcipher_instance_ctx(inst));
 	kfree(inst);
@@ -400,12 +400,12 @@
 	inst->alg.encrypt = encrypt;
 	inst->alg.decrypt = decrypt;
 
-	inst->free = free;
+	inst->free = free_inst;
 
 	err = skcipher_register_instance(tmpl, inst);
 	if (err) {
 err_free_inst:
-		free(inst);
+		free_inst(inst);
 	}
 	return err;
 }
diff --git a/crypto/xts.c b/crypto/xts.c
index dbdd8af..6d8cea9 100644
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -322,7 +322,7 @@
 	crypto_free_cipher(ctx->tweak);
 }
 
-static void free(struct skcipher_instance *inst)
+static void free_inst(struct skcipher_instance *inst)
 {
 	crypto_drop_skcipher(skcipher_instance_ctx(inst));
 	kfree(inst);
@@ -434,12 +434,12 @@
 	inst->alg.encrypt = encrypt;
 	inst->alg.decrypt = decrypt;
 
-	inst->free = free;
+	inst->free = free_inst;
 
 	err = skcipher_register_instance(tmpl, inst);
 	if (err) {
 err_free_inst:
-		free(inst);
+		free_inst(inst);
 	}
 	return err;
 }
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 00112cf..78cfc70 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -88,18 +88,6 @@
 		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED,
 	},
 	{
-		/*
-		 * Asus T200TA, _LID keeps reporting closed after every second
-		 * openening of the lid. Causing immediate re-suspend after
-		 * opening every other open. Using LID_INIT_OPEN fixes this.
-		 */
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
-		},
-		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
-	},
-	{
 		/* GP-electronic T701, _LID method points to a floating GPIO */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index b2263ec..5832bc1 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -273,13 +273,13 @@
  end:
 	if (result) {
 		dev_warn(&device->dev, "Failed to change power state to %s\n",
-			 acpi_power_state_string(state));
+			 acpi_power_state_string(target_state));
 	} else {
 		device->power.state = target_state;
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Device [%s] transitioned to %s\n",
 				  device->pnp.bus_id,
-				  acpi_power_state_string(state)));
+				  acpi_power_state_string(target_state)));
 	}
 
 	return result;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index b4c0152e..145ec0b 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1994,23 +1994,31 @@
 		acpi_set_gpe_wake_mask(NULL, first_ec->gpe, action);
 }
 
-bool acpi_ec_other_gpes_active(void)
-{
-	return acpi_any_gpe_status_set(first_ec ? first_ec->gpe : U32_MAX);
-}
-
 bool acpi_ec_dispatch_gpe(void)
 {
 	u32 ret;
 
 	if (!first_ec)
+		return acpi_any_gpe_status_set(U32_MAX);
+
+	/*
+	 * Report wakeup if the status bit is set for any enabled GPE other
+	 * than the EC one.
+	 */
+	if (acpi_any_gpe_status_set(first_ec->gpe))
+		return true;
+
+	if (ec_no_wakeup)
 		return false;
 
+	/*
+	 * Dispatch the EC GPE in-band, but do not report wakeup in any case
+	 * to allow the caller to process events properly after that.
+	 */
 	ret = acpi_dispatch_gpe(NULL, first_ec->gpe);
-	if (ret == ACPI_INTERRUPT_HANDLED) {
+	if (ret == ACPI_INTERRUPT_HANDLED)
 		pm_pr_dbg("EC GPE dispatched\n");
-		return true;
-	}
+
 	return false;
 }
 #endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index e387517..43411a7 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -202,7 +202,6 @@
 
 #ifdef CONFIG_PM_SLEEP
 void acpi_ec_flush_work(void);
-bool acpi_ec_other_gpes_active(void);
 bool acpi_ec_dispatch_gpe(void);
 #endif
 
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 00a6da2..ed3d218 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -322,10 +322,10 @@
 		resource->res.data.extended_irq.polarity =
 		    link->irq.polarity;
 		if (link->irq.triggering == ACPI_EDGE_SENSITIVE)
-			resource->res.data.irq.shareable =
+			resource->res.data.extended_irq.shareable =
 			    ACPI_EXCLUSIVE;
 		else
-			resource->res.data.irq.shareable = ACPI_SHARED;
+			resource->res.data.extended_irq.shareable = ACPI_SHARED;
 		resource->res.data.extended_irq.interrupt_count = 1;
 		resource->res.data.extended_irq.interrupts[0] = irq;
 		/* ignore resource_source, it's optional */
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 4edc8a3..3850704 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -1013,21 +1013,11 @@
 		if (acpi_check_wakeup_handlers())
 			return true;
 
-		/*
-		 * If the status bit is set for any enabled GPE other than the
-		 * EC one, the wakeup is regarded as a genuine one.
-		 */
-		if (acpi_ec_other_gpes_active())
+		/* Check non-EC GPE wakeups and dispatch the EC GPE. */
+		if (acpi_ec_dispatch_gpe())
 			return true;
 
 		/*
-		 * If the EC GPE status bit has not been set, the wakeup is
-		 * regarded as a spurious one.
-		 */
-		if (!acpi_ec_dispatch_gpe())
-			return false;
-
-		/*
 		 * Cancel the wakeup and process all pending events in case
 		 * there are any wakeup ones in there.
 		 *
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index fe15236..8558b62 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -645,6 +645,7 @@
 	dev->dev.release = amba_device_release;
 	dev->dev.bus = &amba_bustype;
 	dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+	dev->dev.dma_parms = &dev->dma_parms;
 	dev->res.name = dev_name(&dev->dev);
 }
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 0101b65..0c0a736 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -410,6 +410,7 @@
 	{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */
 	{ PCI_VDEVICE(INTEL, 0x5ae3), board_ahci_mobile }, /* ApolloLake AHCI */
 	{ PCI_VDEVICE(INTEL, 0x34d3), board_ahci_mobile }, /* Ice Lake LP AHCI */
+	{ PCI_VDEVICE(INTEL, 0x02d3), board_ahci_mobile }, /* Comet Lake PCH-U AHCI */
 	{ PCI_VDEVICE(INTEL, 0x02d7), board_ahci_mobile }, /* Comet Lake PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index a6b76cc..e517bd8 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -145,7 +145,7 @@
 
 	/* PORT_IDMA_CTL bits */
 	IDMA_CTL_RST_ATA	= (1 << 2),  /* hardreset ATA bus */
-	IDMA_CTL_RST_IDMA	= (1 << 5),  /* reset IDMA machinary */
+	IDMA_CTL_RST_IDMA	= (1 << 5),  /* reset IDMA machinery */
 	IDMA_CTL_GO		= (1 << 7),  /* IDMA mode go */
 	IDMA_CTL_ATA_NIEN	= (1 << 8),  /* ATA IRQ disable */
 
diff --git a/drivers/base/component.c b/drivers/base/component.c
index e977041..dcfbe72 100644
--- a/drivers/base/component.c
+++ b/drivers/base/component.c
@@ -256,7 +256,8 @@
 	ret = master->ops->bind(master->dev);
 	if (ret < 0) {
 		devres_release_group(master->dev, NULL);
-		dev_info(master->dev, "master bind failed: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_info(master->dev, "master bind failed: %d\n", ret);
 		return ret;
 	}
 
@@ -611,8 +612,9 @@
 		devres_release_group(component->dev, NULL);
 		devres_release_group(master->dev, NULL);
 
-		dev_err(master->dev, "failed to bind %s (ops %ps): %d\n",
-			dev_name(component->dev), component->ops, ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(master->dev, "failed to bind %s (ops %ps): %d\n",
+				dev_name(component->dev), component->ops, ret);
 	}
 
 	return ret;
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 139cdf7..073045c 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -2370,6 +2370,11 @@
 	return fw_devlink_flags;
 }
 
+static bool fw_devlink_is_permissive(void)
+{
+	return fw_devlink_flags == DL_FLAG_SYNC_STATE_ONLY;
+}
+
 /**
  * device_add - add device to device hierarchy.
  * @dev: device.
@@ -2524,7 +2529,7 @@
 	if (fw_devlink_flags && is_fwnode_dev &&
 	    fwnode_has_op(dev->fwnode, add_links)) {
 		fw_ret = fwnode_call_int_op(dev->fwnode, add_links, dev);
-		if (fw_ret == -ENODEV)
+		if (fw_ret == -ENODEV && !fw_devlink_is_permissive())
 			device_link_wait_for_mandatory_supplier(dev);
 		else if (fw_ret)
 			device_link_wait_for_optional_supplier(dev);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 06ec0e8..94037be 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -224,17 +224,9 @@
 }
 DEFINE_SHOW_ATTRIBUTE(deferred_devs);
 
-#ifdef CONFIG_MODULES
-/*
- * In the case of modules, set the default probe timeout to
- * 30 seconds to give userland some time to load needed modules
- */
-int driver_deferred_probe_timeout = 30;
-#else
-/* In the case of !modules, no probe timeout needed */
-int driver_deferred_probe_timeout = -1;
-#endif
+int driver_deferred_probe_timeout;
 EXPORT_SYMBOL_GPL(driver_deferred_probe_timeout);
+static DECLARE_WAIT_QUEUE_HEAD(probe_timeout_waitqueue);
 
 static int __init deferred_probe_timeout_setup(char *str)
 {
@@ -266,8 +258,8 @@
 		return -ENODEV;
 	}
 
-	if (!driver_deferred_probe_timeout) {
-		dev_WARN(dev, "deferred probe timeout, ignoring dependency");
+	if (!driver_deferred_probe_timeout && initcalls_done) {
+		dev_warn(dev, "deferred probe timeout, ignoring dependency");
 		return -ETIMEDOUT;
 	}
 
@@ -284,6 +276,7 @@
 
 	list_for_each_entry_safe(private, p, &deferred_probe_pending_list, deferred_probe)
 		dev_info(private->device, "deferred probe pending");
+	wake_up(&probe_timeout_waitqueue);
 }
 static DECLARE_DELAYED_WORK(deferred_probe_timeout_work, deferred_probe_timeout_work_func);
 
@@ -658,6 +651,9 @@
  */
 void wait_for_device_probe(void)
 {
+	/* wait for probe timeout */
+	wait_event(probe_timeout_waitqueue, !driver_deferred_probe_timeout);
+
 	/* wait for the deferred probe workqueue to finish */
 	flush_work(&deferred_probe_work);
 
diff --git a/drivers/base/firmware_loader/fallback_table.c b/drivers/base/firmware_loader/fallback_table.c
index ba9d30b..a182e31 100644
--- a/drivers/base/firmware_loader/fallback_table.c
+++ b/drivers/base/firmware_loader/fallback_table.c
@@ -45,5 +45,4 @@
 	},
 	{ }
 };
-EXPORT_SYMBOL_GPL(firmware_config_table);
 #endif
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 5255550..b27d0f6 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -380,6 +380,8 @@
  */
 static void setup_pdev_dma_masks(struct platform_device *pdev)
 {
+	pdev->dev.dma_parms = &pdev->dma_parms;
+
 	if (!pdev->dev.coherent_dma_mask)
 		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 	if (!pdev->dev.dma_mask) {
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index fdd508a7..0e07e17 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -730,7 +730,7 @@
 
 	if (is_async(dev)) {
 		get_device(dev);
-		async_schedule(func, dev);
+		async_schedule_dev(func, dev);
 		return true;
 	}
 
diff --git a/drivers/block/null_blk.h b/drivers/block/null_blk.h
index 62b6608..81b311c 100644
--- a/drivers/block/null_blk.h
+++ b/drivers/block/null_blk.h
@@ -85,26 +85,35 @@
 	char disk_name[DISK_NAME_LEN];
 };
 
+blk_status_t null_process_cmd(struct nullb_cmd *cmd,
+			      enum req_opf op, sector_t sector,
+			      unsigned int nr_sectors);
+
 #ifdef CONFIG_BLK_DEV_ZONED
-int null_zone_init(struct nullb_device *dev);
-void null_zone_exit(struct nullb_device *dev);
+int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q);
+int null_register_zoned_dev(struct nullb *nullb);
+void null_free_zoned_dev(struct nullb_device *dev);
 int null_report_zones(struct gendisk *disk, sector_t sector,
 		      unsigned int nr_zones, report_zones_cb cb, void *data);
-blk_status_t null_handle_zoned(struct nullb_cmd *cmd,
-				enum req_opf op, sector_t sector,
-				sector_t nr_sectors);
+blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd,
+				    enum req_opf op, sector_t sector,
+				    sector_t nr_sectors);
 size_t null_zone_valid_read_len(struct nullb *nullb,
 				sector_t sector, unsigned int len);
 #else
-static inline int null_zone_init(struct nullb_device *dev)
+static inline int null_init_zoned_dev(struct nullb_device *dev,
+				      struct request_queue *q)
 {
 	pr_err("CONFIG_BLK_DEV_ZONED not enabled\n");
 	return -EINVAL;
 }
-static inline void null_zone_exit(struct nullb_device *dev) {}
-static inline blk_status_t null_handle_zoned(struct nullb_cmd *cmd,
-					     enum req_opf op, sector_t sector,
-					     sector_t nr_sectors)
+static inline int null_register_zoned_dev(struct nullb *nullb)
+{
+	return -ENODEV;
+}
+static inline void null_free_zoned_dev(struct nullb_device *dev) {}
+static inline blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd,
+			enum req_opf op, sector_t sector, sector_t nr_sectors)
 {
 	return BLK_STS_NOTSUPP;
 }
diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 4e1c071..8efd877 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -580,7 +580,7 @@
 	if (!dev)
 		return;
 
-	null_zone_exit(dev);
+	null_free_zoned_dev(dev);
 	badblocks_exit(&dev->badblocks);
 	kfree(dev);
 }
@@ -1276,6 +1276,25 @@
 	}
 }
 
+blk_status_t null_process_cmd(struct nullb_cmd *cmd,
+			      enum req_opf op, sector_t sector,
+			      unsigned int nr_sectors)
+{
+	struct nullb_device *dev = cmd->nq->dev;
+	blk_status_t ret;
+
+	if (dev->badblocks.shift != -1) {
+		ret = null_handle_badblocks(cmd, sector, nr_sectors);
+		if (ret != BLK_STS_OK)
+			return ret;
+	}
+
+	if (dev->memory_backed)
+		return null_handle_memory_backed(cmd, op);
+
+	return BLK_STS_OK;
+}
+
 static blk_status_t null_handle_cmd(struct nullb_cmd *cmd, sector_t sector,
 				    sector_t nr_sectors, enum req_opf op)
 {
@@ -1294,17 +1313,11 @@
 		goto out;
 	}
 
-	if (nullb->dev->badblocks.shift != -1) {
-		cmd->error = null_handle_badblocks(cmd, sector, nr_sectors);
-		if (cmd->error != BLK_STS_OK)
-			goto out;
-	}
-
-	if (dev->memory_backed)
-		cmd->error = null_handle_memory_backed(cmd, op);
-
-	if (!cmd->error && dev->zoned)
-		cmd->error = null_handle_zoned(cmd, op, sector, nr_sectors);
+	if (dev->zoned)
+		cmd->error = null_process_zoned_cmd(cmd, op,
+						    sector, nr_sectors);
+	else
+		cmd->error = null_process_cmd(cmd, op, sector, nr_sectors);
 
 out:
 	nullb_complete_cmd(cmd);
@@ -1605,19 +1618,12 @@
 	disk->queue		= nullb->q;
 	strncpy(disk->disk_name, nullb->disk_name, DISK_NAME_LEN);
 
-#ifdef CONFIG_BLK_DEV_ZONED
 	if (nullb->dev->zoned) {
-		if (queue_is_mq(nullb->q)) {
-			int ret = blk_revalidate_disk_zones(disk);
-			if (ret)
-				return ret;
-		} else {
-			blk_queue_chunk_sectors(nullb->q,
-					nullb->dev->zone_size_sects);
-			nullb->q->nr_zones = blkdev_nr_zones(disk);
-		}
+		int ret = null_register_zoned_dev(nullb);
+
+		if (ret)
+			return ret;
 	}
-#endif
 
 	add_disk(disk);
 	return 0;
@@ -1773,14 +1779,9 @@
 	}
 
 	if (dev->zoned) {
-		rv = null_zone_init(dev);
+		rv = null_init_zoned_dev(dev, nullb->q);
 		if (rv)
 			goto out_cleanup_blk_queue;
-
-		nullb->q->limits.zoned = BLK_ZONED_HM;
-		blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, nullb->q);
-		blk_queue_required_elevator_features(nullb->q,
-						ELEVATOR_F_ZBD_SEQ_WRITE);
 	}
 
 	nullb->q->queuedata = nullb;
@@ -1809,8 +1810,7 @@
 
 	return 0;
 out_cleanup_zone:
-	if (dev->zoned)
-		null_zone_exit(dev);
+	null_free_zoned_dev(dev);
 out_cleanup_blk_queue:
 	blk_cleanup_queue(nullb->q);
 out_cleanup_tags:
diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c
index 673618d..9e4bcda 100644
--- a/drivers/block/null_blk_zoned.c
+++ b/drivers/block/null_blk_zoned.c
@@ -13,7 +13,7 @@
 	return sect >> ilog2(dev->zone_size_sects);
 }
 
-int null_zone_init(struct nullb_device *dev)
+int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 {
 	sector_t dev_size = (sector_t)dev->size * 1024 * 1024;
 	sector_t sector = 0;
@@ -61,10 +61,27 @@
 		sector += dev->zone_size_sects;
 	}
 
+	q->limits.zoned = BLK_ZONED_HM;
+	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
+	blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
+
 	return 0;
 }
 
-void null_zone_exit(struct nullb_device *dev)
+int null_register_zoned_dev(struct nullb *nullb)
+{
+	struct request_queue *q = nullb->q;
+
+	if (queue_is_mq(q))
+		return blk_revalidate_disk_zones(nullb->disk);
+
+	blk_queue_chunk_sectors(q, nullb->dev->zone_size_sects);
+	q->nr_zones = blkdev_nr_zones(nullb->disk);
+
+	return 0;
+}
+
+void null_free_zoned_dev(struct nullb_device *dev)
 {
 	kvfree(dev->zones);
 }
@@ -126,11 +143,16 @@
 	struct nullb_device *dev = cmd->nq->dev;
 	unsigned int zno = null_zone_no(dev, sector);
 	struct blk_zone *zone = &dev->zones[zno];
+	blk_status_t ret;
+
+	trace_nullb_zone_op(cmd, zno, zone->cond);
+
+	if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
+		return null_process_cmd(cmd, REQ_OP_WRITE, sector, nr_sectors);
 
 	switch (zone->cond) {
 	case BLK_ZONE_COND_FULL:
 		/* Cannot write to a full zone */
-		cmd->error = BLK_STS_IOERR;
 		return BLK_STS_IOERR;
 	case BLK_ZONE_COND_EMPTY:
 	case BLK_ZONE_COND_IMP_OPEN:
@@ -143,19 +165,18 @@
 		if (zone->cond != BLK_ZONE_COND_EXP_OPEN)
 			zone->cond = BLK_ZONE_COND_IMP_OPEN;
 
+		ret = null_process_cmd(cmd, REQ_OP_WRITE, sector, nr_sectors);
+		if (ret != BLK_STS_OK)
+			return ret;
+
 		zone->wp += nr_sectors;
 		if (zone->wp == zone->start + zone->len)
 			zone->cond = BLK_ZONE_COND_FULL;
-		break;
-	case BLK_ZONE_COND_NOT_WP:
-		break;
+		return BLK_STS_OK;
 	default:
 		/* Invalid zone condition */
 		return BLK_STS_IOERR;
 	}
-
-	trace_nullb_zone_op(cmd, zno, zone->cond);
-	return BLK_STS_OK;
 }
 
 static blk_status_t null_zone_mgmt(struct nullb_cmd *cmd, enum req_opf op,
@@ -216,8 +237,8 @@
 	return BLK_STS_OK;
 }
 
-blk_status_t null_handle_zoned(struct nullb_cmd *cmd, enum req_opf op,
-			       sector_t sector, sector_t nr_sectors)
+blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd, enum req_opf op,
+				    sector_t sector, sector_t nr_sectors)
 {
 	switch (op) {
 	case REQ_OP_WRITE:
@@ -229,6 +250,6 @@
 	case REQ_OP_ZONE_FINISH:
 		return null_zone_mgmt(cmd, op, sector);
 	default:
-		return BLK_STS_OK;
+		return null_process_cmd(cmd, op, sector, nr_sectors);
 	}
 }
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 1e0a6b1..67d65ac 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -3754,11 +3754,7 @@
 static void rbd_notify_op_lock(struct rbd_device *rbd_dev,
 			       enum rbd_notify_op notify_op)
 {
-	struct page **reply_pages;
-	size_t reply_len;
-
-	__rbd_notify_op_lock(rbd_dev, notify_op, &reply_pages, &reply_len);
-	ceph_release_page_vector(reply_pages, calc_pages_for(0, reply_len));
+	__rbd_notify_op_lock(rbd_dev, notify_op, NULL, NULL);
 }
 
 static void rbd_notify_acquired_lock(struct work_struct *work)
@@ -4527,6 +4523,10 @@
 	cancel_work_sync(&rbd_dev->unlock_work);
 }
 
+/*
+ * header_rwsem must not be held to avoid a deadlock with
+ * rbd_dev_refresh() when flushing notifies.
+ */
 static void rbd_unregister_watch(struct rbd_device *rbd_dev)
 {
 	cancel_tasks_sync(rbd_dev);
@@ -6894,9 +6894,10 @@
 
 static void rbd_dev_image_release(struct rbd_device *rbd_dev)
 {
-	rbd_dev_unprobe(rbd_dev);
-	if (rbd_dev->opts)
+	if (!rbd_is_ro(rbd_dev))
 		rbd_unregister_watch(rbd_dev);
+
+	rbd_dev_unprobe(rbd_dev);
 	rbd_dev->image_format = 0;
 	kfree(rbd_dev->spec->image_id);
 	rbd_dev->spec->image_id = NULL;
@@ -6907,6 +6908,9 @@
  * device.  If this image is the one being mapped (i.e., not a
  * parent), initiate a watch on its header object before using that
  * object to get detailed information about the rbd image.
+ *
+ * On success, returns with header_rwsem held for write if called
+ * with @depth == 0.
  */
 static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 {
@@ -6936,11 +6940,14 @@
 		}
 	}
 
+	if (!depth)
+		down_write(&rbd_dev->header_rwsem);
+
 	ret = rbd_dev_header_info(rbd_dev);
 	if (ret) {
 		if (ret == -ENOENT && !need_watch)
 			rbd_print_dne(rbd_dev, false);
-		goto err_out_watch;
+		goto err_out_probe;
 	}
 
 	/*
@@ -6985,10 +6992,11 @@
 	return 0;
 
 err_out_probe:
-	rbd_dev_unprobe(rbd_dev);
-err_out_watch:
+	if (!depth)
+		up_write(&rbd_dev->header_rwsem);
 	if (need_watch)
 		rbd_unregister_watch(rbd_dev);
+	rbd_dev_unprobe(rbd_dev);
 err_out_format:
 	rbd_dev->image_format = 0;
 	kfree(rbd_dev->spec->image_id);
@@ -7050,12 +7058,9 @@
 		goto err_out_rbd_dev;
 	}
 
-	down_write(&rbd_dev->header_rwsem);
 	rc = rbd_dev_image_probe(rbd_dev, 0);
-	if (rc < 0) {
-		up_write(&rbd_dev->header_rwsem);
+	if (rc < 0)
 		goto err_out_rbd_dev;
-	}
 
 	if (rbd_dev->opts->alloc_size > rbd_dev->layout.object_size) {
 		rbd_warn(rbd_dev, "alloc_size adjusted to %u",
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index f9b1e70..9d21bf0 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -15,6 +15,7 @@
 #include <linux/blk-mq.h>
 #include <linux/blk-mq-virtio.h>
 #include <linux/numa.h>
+#include <uapi/linux/virtio_ring.h>
 
 #define PART_BITS 4
 #define VQ_NAME_LEN 16
@@ -32,6 +33,15 @@
 } ____cacheline_aligned_in_smp;
 
 struct virtio_blk {
+	/*
+	 * This mutex must be held by anything that may run after
+	 * virtblk_remove() sets vblk->vdev to NULL.
+	 *
+	 * blk-mq, virtqueue processing, and sysfs attribute code paths are
+	 * shut down before vblk->vdev is set to NULL and therefore do not need
+	 * to hold this mutex.
+	 */
+	struct mutex vdev_mutex;
 	struct virtio_device *vdev;
 
 	/* The disk structure for the kernel. */
@@ -43,6 +53,13 @@
 	/* Process context for config space updates */
 	struct work_struct config_work;
 
+	/*
+	 * Tracks references from block_device_operations open/release and
+	 * virtio_driver probe/remove so this object can be freed once no
+	 * longer in use.
+	 */
+	refcount_t refs;
+
 	/* What host tells us, plus 2 for header & tailer. */
 	unsigned int sg_elems;
 
@@ -294,10 +311,55 @@
 	return err;
 }
 
+static void virtblk_get(struct virtio_blk *vblk)
+{
+	refcount_inc(&vblk->refs);
+}
+
+static void virtblk_put(struct virtio_blk *vblk)
+{
+	if (refcount_dec_and_test(&vblk->refs)) {
+		ida_simple_remove(&vd_index_ida, vblk->index);
+		mutex_destroy(&vblk->vdev_mutex);
+		kfree(vblk);
+	}
+}
+
+static int virtblk_open(struct block_device *bd, fmode_t mode)
+{
+	struct virtio_blk *vblk = bd->bd_disk->private_data;
+	int ret = 0;
+
+	mutex_lock(&vblk->vdev_mutex);
+
+	if (vblk->vdev)
+		virtblk_get(vblk);
+	else
+		ret = -ENXIO;
+
+	mutex_unlock(&vblk->vdev_mutex);
+	return ret;
+}
+
+static void virtblk_release(struct gendisk *disk, fmode_t mode)
+{
+	struct virtio_blk *vblk = disk->private_data;
+
+	virtblk_put(vblk);
+}
+
 /* We provide getgeo only to please some old bootloader/partitioning tools */
 static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
 {
 	struct virtio_blk *vblk = bd->bd_disk->private_data;
+	int ret = 0;
+
+	mutex_lock(&vblk->vdev_mutex);
+
+	if (!vblk->vdev) {
+		ret = -ENXIO;
+		goto out;
+	}
 
 	/* see if the host passed in geometry config */
 	if (virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_GEOMETRY)) {
@@ -313,11 +375,15 @@
 		geo->sectors = 1 << 5;
 		geo->cylinders = get_capacity(bd->bd_disk) >> 11;
 	}
-	return 0;
+out:
+	mutex_unlock(&vblk->vdev_mutex);
+	return ret;
 }
 
 static const struct block_device_operations virtblk_fops = {
 	.owner  = THIS_MODULE,
+	.open = virtblk_open,
+	.release = virtblk_release,
 	.getgeo = virtblk_getgeo,
 };
 
@@ -654,6 +720,10 @@
 		goto out_free_index;
 	}
 
+	/* This reference is dropped in virtblk_remove(). */
+	refcount_set(&vblk->refs, 1);
+	mutex_init(&vblk->vdev_mutex);
+
 	vblk->vdev = vdev;
 	vblk->sg_elems = sg_elems;
 
@@ -819,8 +889,6 @@
 static void virtblk_remove(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk = vdev->priv;
-	int index = vblk->index;
-	int refc;
 
 	/* Make sure no work handler is accessing the device. */
 	flush_work(&vblk->config_work);
@@ -830,18 +898,21 @@
 
 	blk_mq_free_tag_set(&vblk->tag_set);
 
+	mutex_lock(&vblk->vdev_mutex);
+
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 
-	refc = kref_read(&disk_to_dev(vblk->disk)->kobj.kref);
+	/* Virtqueues are stopped, nothing can use vblk->vdev anymore. */
+	vblk->vdev = NULL;
+
 	put_disk(vblk->disk);
 	vdev->config->del_vqs(vdev);
 	kfree(vblk->vqs);
-	kfree(vblk);
 
-	/* Only free device id if we don't have any users */
-	if (refc == 1)
-		ida_simple_remove(&vd_index_ida, index);
+	mutex_unlock(&vblk->vdev_mutex);
+
+	virtblk_put(vblk);
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index b38359c..eb2ab05 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -812,10 +812,9 @@
 	if (!mhi_cntrl)
 		return -EINVAL;
 
-	if (!mhi_cntrl->runtime_get || !mhi_cntrl->runtime_put)
-		return -EINVAL;
-
-	if (!mhi_cntrl->status_cb || !mhi_cntrl->link_status)
+	if (!mhi_cntrl->runtime_get || !mhi_cntrl->runtime_put ||
+	    !mhi_cntrl->status_cb || !mhi_cntrl->read_reg ||
+	    !mhi_cntrl->write_reg)
 		return -EINVAL;
 
 	ret = parse_config(mhi_cntrl, config);
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 5deadfa..095d95b 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -11,9 +11,6 @@
 
 extern struct bus_type mhi_bus_type;
 
-/* MHI MMIO register mapping */
-#define PCI_INVALID_READ(val) (val == U32_MAX)
-
 #define MHIREGLEN (0x0)
 #define MHIREGLEN_MHIREGLEN_MASK (0xFFFFFFFF)
 #define MHIREGLEN_MHIREGLEN_SHIFT (0)
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index eb4256b..97e06cc5 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -18,16 +18,7 @@
 int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl,
 			      void __iomem *base, u32 offset, u32 *out)
 {
-	u32 tmp = readl(base + offset);
-
-	/* If there is any unexpected value, query the link status */
-	if (PCI_INVALID_READ(tmp) &&
-	    mhi_cntrl->link_status(mhi_cntrl))
-		return -EIO;
-
-	*out = tmp;
-
-	return 0;
+	return mhi_cntrl->read_reg(mhi_cntrl, base + offset, out);
 }
 
 int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,
@@ -49,7 +40,7 @@
 void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
 		   u32 offset, u32 val)
 {
-	writel(val, base + offset);
+	mhi_cntrl->write_reg(mhi_cntrl, base + offset, val);
 }
 
 void mhi_write_reg_field(struct mhi_controller *mhi_cntrl, void __iomem *base,
@@ -294,7 +285,7 @@
 		    !(mhi_chan->ee_mask & BIT(mhi_cntrl->ee)))
 			continue;
 		mhi_dev = mhi_alloc_device(mhi_cntrl);
-		if (!mhi_dev)
+		if (IS_ERR(mhi_dev))
 			return;
 
 		mhi_dev->dev_type = MHI_DEVICE_XFER;
@@ -336,7 +327,8 @@
 
 		/* Channel name is same for both UL and DL */
 		mhi_dev->chan_name = mhi_chan->name;
-		dev_set_name(&mhi_dev->dev, "%04x_%s", mhi_chan->chan,
+		dev_set_name(&mhi_dev->dev, "%s_%s",
+			     dev_name(mhi_cntrl->cntrl_dev),
 			     mhi_dev->chan_name);
 
 		/* Init wakeup source if available */
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 52690cb..dc83d65 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -902,7 +902,11 @@
 			   MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
 			   msecs_to_jiffies(mhi_cntrl->timeout_ms));
 
-	return (MHI_IN_MISSION_MODE(mhi_cntrl->ee)) ? 0 : -EIO;
+	ret = (MHI_IN_MISSION_MODE(mhi_cntrl->ee)) ? 0 : -ETIMEDOUT;
+	if (ret)
+		mhi_power_down(mhi_cntrl, false);
+
+	return ret;
 }
 EXPORT_SYMBOL(mhi_sync_power_up);
 
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 718d8c0..79a6e47 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -11,6 +11,7 @@
 #include <linux/virtio.h>
 #include <linux/virtio_rng.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 
 static DEFINE_IDA(rng_index_ida);
 
diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index b7145f3..2704470 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -1947,8 +1947,8 @@
 	if (adev->type != &i2c_adapter_type)
 		return 0;
 
-	addr_info->added_client = i2c_new_device(to_i2c_adapter(adev),
-						 &addr_info->binfo);
+	addr_info->added_client = i2c_new_client_device(to_i2c_adapter(adev),
+							&addr_info->binfo);
 
 	if (!addr_info->adapter_name)
 		return 1; /* Only try the first I2C adapter by default. */
diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index a438b12..1621ce8 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -323,7 +323,7 @@
 
 	for (i = 0; i < chip->nr_allocated_banks; i++) {
 		if (digests[i].alg_id != chip->allocated_banks[i].alg_id) {
-			rc = EINVAL;
+			rc = -EINVAL;
 			goto out;
 		}
 	}
diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
index 76f67b1..eff1f12 100644
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -681,6 +681,7 @@
 		rc = -ENODEV;
 	return rc;
 }
+EXPORT_SYMBOL_GPL(tpm2_get_cc_attrs_tbl);
 
 /**
  * tpm2_startup - turn on the TPM
diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
index 1a49db9..09fe452 100644
--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 IBM Corporation
+ * Copyright (C) 2012-2020 IBM Corporation
  *
  * Author: Ashley Lai <ashleydlai@gmail.com>
  *
@@ -135,6 +135,64 @@
 }
 
 /**
+ * ibmvtpm_crq_send_init - Send a CRQ initialize message
+ * @ibmvtpm:	vtpm device struct
+ *
+ * Return:
+ *	0 on success.
+ *	Non-zero on failure.
+ */
+static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
+{
+	int rc;
+
+	rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
+	if (rc != H_SUCCESS)
+		dev_err(ibmvtpm->dev,
+			"%s failed rc=%d\n", __func__, rc);
+
+	return rc;
+}
+
+/**
+ * tpm_ibmvtpm_resume - Resume from suspend
+ *
+ * @dev:	device struct
+ *
+ * Return: Always 0.
+ */
+static int tpm_ibmvtpm_resume(struct device *dev)
+{
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+	int rc = 0;
+
+	do {
+		if (rc)
+			msleep(100);
+		rc = plpar_hcall_norets(H_ENABLE_CRQ,
+					ibmvtpm->vdev->unit_address);
+	} while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
+
+	if (rc) {
+		dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = vio_enable_interrupts(ibmvtpm->vdev);
+	if (rc) {
+		dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = ibmvtpm_crq_send_init(ibmvtpm);
+	if (rc)
+		dev_err(dev, "Error send_init rc=%d\n", rc);
+
+	return rc;
+}
+
+/**
  * tpm_ibmvtpm_send() - Send a TPM command
  * @chip:	tpm chip struct
  * @buf:	buffer contains data to send
@@ -147,6 +205,7 @@
 static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
 {
 	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+	bool retry = true;
 	int rc, sig;
 
 	if (!ibmvtpm->rtce_buf) {
@@ -180,18 +239,27 @@
 	 */
 	ibmvtpm->tpm_processing_cmd = true;
 
+again:
 	rc = ibmvtpm_send_crq(ibmvtpm->vdev,
 			IBMVTPM_VALID_CMD, VTPM_TPM_COMMAND,
 			count, ibmvtpm->rtce_dma_handle);
 	if (rc != H_SUCCESS) {
+		/*
+		 * H_CLOSED can be returned after LPM resume.  Call
+		 * tpm_ibmvtpm_resume() to re-enable the CRQ then retry
+		 * ibmvtpm_send_crq() once before failing.
+		 */
+		if (rc == H_CLOSED && retry) {
+			tpm_ibmvtpm_resume(ibmvtpm->dev);
+			retry = false;
+			goto again;
+		}
 		dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
-		rc = 0;
 		ibmvtpm->tpm_processing_cmd = false;
-	} else
-		rc = 0;
+	}
 
 	spin_unlock(&ibmvtpm->rtce_lock);
-	return rc;
+	return 0;
 }
 
 static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
@@ -270,26 +338,6 @@
 }
 
 /**
- * ibmvtpm_crq_send_init - Send a CRQ initialize message
- * @ibmvtpm:	vtpm device struct
- *
- * Return:
- *	0 on success.
- *	Non-zero on failure.
- */
-static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
-{
-	int rc;
-
-	rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
-	if (rc != H_SUCCESS)
-		dev_err(ibmvtpm->dev,
-			"ibmvtpm_crq_send_init failed rc=%d\n", rc);
-
-	return rc;
-}
-
-/**
  * tpm_ibmvtpm_remove - ibm vtpm remove entry point
  * @vdev:	vio device struct
  *
@@ -401,44 +449,6 @@
 				  ibmvtpm->crq_dma_handle, CRQ_RES_BUF_SIZE);
 }
 
-/**
- * tpm_ibmvtpm_resume - Resume from suspend
- *
- * @dev:	device struct
- *
- * Return: Always 0.
- */
-static int tpm_ibmvtpm_resume(struct device *dev)
-{
-	struct tpm_chip *chip = dev_get_drvdata(dev);
-	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
-	int rc = 0;
-
-	do {
-		if (rc)
-			msleep(100);
-		rc = plpar_hcall_norets(H_ENABLE_CRQ,
-					ibmvtpm->vdev->unit_address);
-	} while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
-
-	if (rc) {
-		dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
-		return rc;
-	}
-
-	rc = vio_enable_interrupts(ibmvtpm->vdev);
-	if (rc) {
-		dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
-		return rc;
-	}
-
-	rc = ibmvtpm_crq_send_init(ibmvtpm);
-	if (rc)
-		dev_err(dev, "Error send_init rc=%d\n", rc);
-
-	return rc;
-}
-
 static bool tpm_ibmvtpm_req_canceled(struct tpm_chip *chip, u8 status)
 {
 	return (status == 0);
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 27c6ca0..2435216 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -433,6 +433,9 @@
 	u32 intmask;
 	int rc;
 
+	if (priv->irq == 0)
+		return;
+
 	rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
 	if (rc < 0)
 		intmask = 0;
@@ -1062,9 +1065,12 @@
 		if (irq) {
 			tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
 						 irq);
-			if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
+			if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
 				dev_err(&chip->dev, FW_BUG
 					"TPM interrupt not working, polling instead\n");
+
+				disable_interrupts(chip);
+			}
 		} else {
 			tpm_tis_probe_irq(chip, intmask);
 		}
diff --git a/drivers/clk/clk-asm9260.c b/drivers/clk/clk-asm9260.c
index 536b59a..bacebd4 100644
--- a/drivers/clk/clk-asm9260.c
+++ b/drivers/clk/clk-asm9260.c
@@ -276,7 +276,7 @@
 
 	/* TODO: Convert to DT parent scheme */
 	ref_clk = of_clk_get_parent_name(np, 0);
-	hw = __clk_hw_register_fixed_rate_with_accuracy(NULL, NULL, pll_clk,
+	hw = __clk_hw_register_fixed_rate(NULL, NULL, pll_clk,
 			ref_clk, NULL, NULL, 0, rate, 0,
 			CLK_FIXED_RATE_PARENT_ACCURACY);
 
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 39c59f0..2dfb30b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3519,6 +3519,9 @@
 out:
 	clk_pm_runtime_put(core);
 unlock:
+	if (ret)
+		hlist_del_init(&core->child_node);
+
 	clk_prepare_unlock();
 
 	if (!ret)
diff --git a/drivers/clk/mmp/clk-pll.c b/drivers/clk/mmp/clk-pll.c
index 7077be2..962014c 100644
--- a/drivers/clk/mmp/clk-pll.c
+++ b/drivers/clk/mmp/clk-pll.c
@@ -97,7 +97,7 @@
 	.recalc_rate = mmp_clk_pll_recalc_rate,
 };
 
-struct clk *mmp_clk_register_pll(char *name,
+static struct clk *mmp_clk_register_pll(char *name,
 			unsigned long default_rate,
 			void __iomem *enable_reg, u32 enable,
 			void __iomem *reg, u8 shift,
@@ -137,3 +137,34 @@
 
 	return clk;
 }
+
+void mmp_register_pll_clks(struct mmp_clk_unit *unit,
+			struct mmp_param_pll_clk *clks,
+			void __iomem *base, int size)
+{
+	struct clk *clk;
+	int i;
+
+	for (i = 0; i < size; i++) {
+		void __iomem *reg = NULL;
+
+		if (clks[i].offset)
+			reg = base + clks[i].offset;
+
+		clk = mmp_clk_register_pll(clks[i].name,
+					clks[i].default_rate,
+					base + clks[i].enable_offset,
+					clks[i].enable,
+					reg, clks[i].shift,
+					clks[i].input_rate,
+					base + clks[i].postdiv_offset,
+					clks[i].postdiv_shift);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, clks[i].name);
+			continue;
+		}
+		if (clks[i].id)
+			unit->clk_table[clks[i].id] = clk;
+	}
+}
diff --git a/drivers/clk/mmp/clk.c b/drivers/clk/mmp/clk.c
index 3171236..ca7d37e 100644
--- a/drivers/clk/mmp/clk.c
+++ b/drivers/clk/mmp/clk.c
@@ -176,37 +176,6 @@
 	}
 }
 
-void mmp_register_pll_clks(struct mmp_clk_unit *unit,
-			struct mmp_param_pll_clk *clks,
-			void __iomem *base, int size)
-{
-	struct clk *clk;
-	int i;
-
-	for (i = 0; i < size; i++) {
-		void __iomem *reg = NULL;
-
-		if (clks[i].offset)
-			reg = base + clks[i].offset;
-
-		clk = mmp_clk_register_pll(clks[i].name,
-					clks[i].default_rate,
-					base + clks[i].enable_offset,
-					clks[i].enable,
-					reg, clks[i].shift,
-					clks[i].input_rate,
-					base + clks[i].postdiv_offset,
-					clks[i].postdiv_shift);
-		if (IS_ERR(clk)) {
-			pr_err("%s: failed to register clock %s\n",
-			       __func__, clks[i].name);
-			continue;
-		}
-		if (clks[i].id)
-			unit->clk_table[clks[i].id] = clk;
-	}
-}
-
 void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id,
 			struct clk *clk)
 {
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 971b4d6..20dc1e5 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -238,13 +238,6 @@
 			struct mmp_param_pll_clk *clks,
 			void __iomem *base, int size);
 
-extern struct clk *mmp_clk_register_pll(char *name,
-			unsigned long default_rate,
-			void __iomem *enable_reg, u32 enable,
-			void __iomem *reg, u8 shift,
-			unsigned long input_rate,
-			void __iomem *postdiv_reg, u8 postdiv_shift);
-
 #define DEFINE_MIX_REG_INFO(w_d, s_d, w_m, s_m, fc)	\
 {							\
 	.width_div = (w_d),				\
diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index d17cfb7..d7243c0 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -156,8 +156,6 @@
 PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "xin12m" };
 PNAME(mux_sclk_spdif_p)		= { "sclk_spdif_src", "spdif_frac", "xin12m" };
 
-PNAME(mux_aclk_gpu_pre_p)	= { "cpll_gpu", "gpll_gpu", "hdmiphy_gpu", "usb480m_gpu" };
-
 PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
@@ -468,16 +466,9 @@
 			RK2928_CLKSEL_CON(24), 6, 10, DFLAGS,
 			RK2928_CLKGATE_CON(2), 8, GFLAGS),
 
-	GATE(0, "cpll_gpu", "cpll", 0,
+	COMPOSITE(0, "aclk_gpu_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS,
 			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "gpll_gpu", "gpll", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "hdmiphy_gpu", "hdmiphy", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "usb480m_gpu", "usb480m", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	COMPOSITE_NOGATE(0, "aclk_gpu_pre", mux_aclk_gpu_pre_p, 0,
-			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS),
 
 	COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_2plls_p, 0,
 			RK2928_CLKSEL_CON(25), 8, 1, MFLAGS, 0, 7, DFLAGS,
@@ -582,8 +573,8 @@
 	GATE(0, "pclk_peri_noc", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 2, GFLAGS),
 
 	/* PD_GPU */
-	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS),
-	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS),
+	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 14, GFLAGS),
+	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
 
 	/* PD_BUS */
 	GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
diff --git a/drivers/clk/sprd/sc9863a-clk.c b/drivers/clk/sprd/sc9863a-clk.c
index a0631f7..2e2dfb2 100644
--- a/drivers/clk/sprd/sc9863a-clk.c
+++ b/drivers/clk/sprd/sc9863a-clk.c
@@ -1641,8 +1641,9 @@
 				0x1000, BIT(12), 0, 0);
 static SPRD_SC_GATE_CLK_FW_NAME(uart0_eb,	"uart0-eb",	"ext-26m", 0x0,
 				0x1000, BIT(13), 0, 0);
+/* uart1_eb is for console, don't gate even if unused */
 static SPRD_SC_GATE_CLK_FW_NAME(uart1_eb,	"uart1-eb",	"ext-26m", 0x0,
-				0x1000, BIT(14), 0, 0);
+				0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
 static SPRD_SC_GATE_CLK_FW_NAME(uart2_eb,	"uart2-eb",	"ext-26m", 0x0,
 				0x1000, BIT(15), 0, 0);
 static SPRD_SC_GATE_CLK_FW_NAME(uart3_eb,	"uart3-eb",	"ext-26m", 0x0,
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 64e229d..e931319 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -1292,7 +1292,7 @@
 	{ TEGRA124_CLK_UARTB, TEGRA124_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA124_CLK_UARTC, TEGRA124_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA124_CLK_UARTD, TEGRA124_CLK_PLL_P, 408000000, 0 },
-	{ TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 0 },
+	{ TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 282240000, 0 },
 	{ TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA124_CLK_I2S0, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA124_CLK_I2S1, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index e001b9b..7dc30dd 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -212,7 +212,7 @@
 };
 
 static const struct omap_clkctrl_reg_data am3_l4_rtc_clkctrl_regs[] __initconst = {
-	{ AM3_L4_RTC_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk_32768_ck" },
+	{ AM3_L4_RTC_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk-24mhz-clkctrl:0000:0" },
 	{ 0 },
 };
 
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 0622660..864c484 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -255,24 +255,53 @@
 	return entry->clk;
 }
 
+/* Get clkctrl clock base name based on clkctrl_name or dts node */
+static const char * __init clkctrl_get_clock_name(struct device_node *np,
+						  const char *clkctrl_name,
+						  int offset, int index,
+						  bool legacy_naming)
+{
+	char *clock_name;
+
+	/* l4per-clkctrl:1234:0 style naming based on clkctrl_name */
+	if (clkctrl_name && !legacy_naming) {
+		clock_name = kasprintf(GFP_KERNEL, "%s-clkctrl:%04x:%d",
+				       clkctrl_name, offset, index);
+		strreplace(clock_name, '_', '-');
+
+		return clock_name;
+	}
+
+	/* l4per:1234:0 old style naming based on clkctrl_name */
+	if (clkctrl_name)
+		return kasprintf(GFP_KERNEL, "%s_cm:clk:%04x:%d",
+				 clkctrl_name, offset, index);
+
+	/* l4per_cm:1234:0 old style naming based on parent node name */
+	if (legacy_naming)
+		return kasprintf(GFP_KERNEL, "%pOFn:clk:%04x:%d",
+				 np->parent, offset, index);
+
+	/* l4per-clkctrl:1234:0 style naming based on node name */
+	return kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", np, offset, index);
+}
+
 static int __init
 _ti_clkctrl_clk_register(struct omap_clkctrl_provider *provider,
 			 struct device_node *node, struct clk_hw *clk_hw,
 			 u16 offset, u8 bit, const char * const *parents,
-			 int num_parents, const struct clk_ops *ops)
+			 int num_parents, const struct clk_ops *ops,
+			 const char *clkctrl_name)
 {
 	struct clk_init_data init = { NULL };
 	struct clk *clk;
 	struct omap_clkctrl_clk *clkctrl_clk;
 	int ret = 0;
 
-	if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
-		init.name = kasprintf(GFP_KERNEL, "%pOFn:%pOFn:%04x:%d",
-				      node->parent, node, offset,
-				      bit);
-	else
-		init.name = kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", node,
-				      offset, bit);
+	init.name = clkctrl_get_clock_name(node, clkctrl_name, offset, bit,
+					   ti_clk_get_features()->flags &
+					   TI_CLK_CLKCTRL_COMPAT);
+
 	clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL);
 	if (!init.name || !clkctrl_clk) {
 		ret = -ENOMEM;
@@ -309,7 +338,7 @@
 _ti_clkctrl_setup_gate(struct omap_clkctrl_provider *provider,
 		       struct device_node *node, u16 offset,
 		       const struct omap_clkctrl_bit_data *data,
-		       void __iomem *reg)
+		       void __iomem *reg, const char *clkctrl_name)
 {
 	struct clk_hw_omap *clk_hw;
 
@@ -322,7 +351,7 @@
 
 	if (_ti_clkctrl_clk_register(provider, node, &clk_hw->hw, offset,
 				     data->bit, data->parents, 1,
-				     &omap_gate_clk_ops))
+				     &omap_gate_clk_ops, clkctrl_name))
 		kfree(clk_hw);
 }
 
@@ -330,7 +359,7 @@
 _ti_clkctrl_setup_mux(struct omap_clkctrl_provider *provider,
 		      struct device_node *node, u16 offset,
 		      const struct omap_clkctrl_bit_data *data,
-		      void __iomem *reg)
+		      void __iomem *reg, const char *clkctrl_name)
 {
 	struct clk_omap_mux *mux;
 	int num_parents = 0;
@@ -357,7 +386,7 @@
 
 	if (_ti_clkctrl_clk_register(provider, node, &mux->hw, offset,
 				     data->bit, data->parents, num_parents,
-				     &ti_clk_mux_ops))
+				     &ti_clk_mux_ops, clkctrl_name))
 		kfree(mux);
 }
 
@@ -365,7 +394,7 @@
 _ti_clkctrl_setup_div(struct omap_clkctrl_provider *provider,
 		      struct device_node *node, u16 offset,
 		      const struct omap_clkctrl_bit_data *data,
-		      void __iomem *reg)
+		      void __iomem *reg, const char *clkctrl_name)
 {
 	struct clk_omap_divider *div;
 	const struct omap_clkctrl_div_data *div_data = data->data;
@@ -393,7 +422,7 @@
 
 	if (_ti_clkctrl_clk_register(provider, node, &div->hw, offset,
 				     data->bit, data->parents, 1,
-				     &ti_clk_divider_ops))
+				     &ti_clk_divider_ops, clkctrl_name))
 		kfree(div);
 }
 
@@ -401,7 +430,7 @@
 _ti_clkctrl_setup_subclks(struct omap_clkctrl_provider *provider,
 			  struct device_node *node,
 			  const struct omap_clkctrl_reg_data *data,
-			  void __iomem *reg)
+			  void __iomem *reg, const char *clkctrl_name)
 {
 	const struct omap_clkctrl_bit_data *bits = data->bit_data;
 
@@ -412,17 +441,17 @@
 		switch (bits->type) {
 		case TI_CLK_GATE:
 			_ti_clkctrl_setup_gate(provider, node, data->offset,
-					       bits, reg);
+					       bits, reg, clkctrl_name);
 			break;
 
 		case TI_CLK_DIVIDER:
 			_ti_clkctrl_setup_div(provider, node, data->offset,
-					      bits, reg);
+					      bits, reg, clkctrl_name);
 			break;
 
 		case TI_CLK_MUX:
 			_ti_clkctrl_setup_mux(provider, node, data->offset,
-					      bits, reg);
+					      bits, reg, clkctrl_name);
 			break;
 
 		default:
@@ -461,42 +490,10 @@
 			return name;
 		}
 	}
-	of_node_put(np);
 
 	return NULL;
 }
 
-/* Get clkctrl clock base name based on clkctrl_name or dts node */
-static const char * __init clkctrl_get_clock_name(struct device_node *np,
-						  const char *clkctrl_name,
-						  int offset, int index,
-						  bool legacy_naming)
-{
-	char *clock_name;
-
-	/* l4per-clkctrl:1234:0 style naming based on clkctrl_name */
-	if (clkctrl_name && !legacy_naming) {
-		clock_name = kasprintf(GFP_KERNEL, "%s-clkctrl:%04x:%d",
-				       clkctrl_name, offset, index);
-		strreplace(clock_name, '_', '-');
-
-		return clock_name;
-	}
-
-	/* l4per:1234:0 old style naming based on clkctrl_name */
-	if (clkctrl_name)
-		return kasprintf(GFP_KERNEL, "%s_cm:clk:%04x:%d",
-				 clkctrl_name, offset, index);
-
-	/* l4per_cm:1234:0 old style naming based on parent node name */
-	if (legacy_naming)
-		return kasprintf(GFP_KERNEL, "%pOFn:clk:%04x:%d",
-				 np->parent, offset, index);
-
-	/* l4per-clkctrl:1234:0 style naming based on node name */
-	return kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", np, offset, index);
-}
-
 static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 {
 	struct omap_clkctrl_provider *provider;
@@ -664,7 +661,7 @@
 		hw->enable_reg.ptr = provider->base + reg_data->offset;
 
 		_ti_clkctrl_setup_subclks(provider, node, reg_data,
-					  hw->enable_reg.ptr);
+					  hw->enable_reg.ptr, clkctrl_name);
 
 		if (reg_data->flags & CLKF_SW_SUP)
 			hw->enable_bit = MODULEMODE_SWCTRL;
diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
index b05da85..f9f4bab 100644
--- a/drivers/clk/versatile/clk-impd1.c
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -206,6 +206,7 @@
 		return -ENODEV;
 	}
 
+	of_property_read_string(np, "clock-output-names", &name);
 	parent_name = of_clk_get_parent_name(np, 0);
 	clk = icst_clk_setup(NULL, desc, name, parent_name, map,
 			     ICST_INTEGRATOR_IM_PD1);
diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 9dab190..aa13708 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -44,6 +44,7 @@
  * @base:		base port address of the IIO device
  */
 struct quad8_iio {
+	struct mutex lock;
 	struct counter_device counter;
 	unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
 	unsigned int preset[QUAD8_NUM_COUNTERS];
@@ -123,6 +124,8 @@
 		/* Borrow XOR Carry effectively doubles count range */
 		*val = (borrow ^ carry) << 24;
 
+		mutex_lock(&priv->lock);
+
 		/* Reset Byte Pointer; transfer Counter to Output Latch */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
 		     base_offset + 1);
@@ -130,6 +133,8 @@
 		for (i = 0; i < 3; i++)
 			*val |= (unsigned int)inb(base_offset) << (8 * i);
 
+		mutex_unlock(&priv->lock);
+
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_ENABLE:
 		*val = priv->ab_enable[chan->channel];
@@ -160,6 +165,8 @@
 		if ((unsigned int)val > 0xFFFFFF)
 			return -EINVAL;
 
+		mutex_lock(&priv->lock);
+
 		/* Reset Byte Pointer */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
@@ -183,12 +190,16 @@
 		/* Reset Error flag */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 
+		mutex_unlock(&priv->lock);
+
 		return 0;
 	case IIO_CHAN_INFO_ENABLE:
 		/* only boolean values accepted */
 		if (val < 0 || val > 1)
 			return -EINVAL;
 
+		mutex_lock(&priv->lock);
+
 		priv->ab_enable[chan->channel] = val;
 
 		ior_cfg = val | priv->preset_enable[chan->channel] << 1;
@@ -196,11 +207,18 @@
 		/* Load I/O control configuration */
 		outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
 
+		mutex_unlock(&priv->lock);
+
 		return 0;
 	case IIO_CHAN_INFO_SCALE:
+		mutex_lock(&priv->lock);
+
 		/* Quadrature scaling only available in quadrature mode */
-		if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1))
+		if (!priv->quadrature_mode[chan->channel] &&
+				(val2 || val != 1)) {
+			mutex_unlock(&priv->lock);
 			return -EINVAL;
+		}
 
 		/* Only three gain states (1, 0.5, 0.25) */
 		if (val == 1 && !val2)
@@ -214,11 +232,15 @@
 				priv->quadrature_scale[chan->channel] = 2;
 				break;
 			default:
+				mutex_unlock(&priv->lock);
 				return -EINVAL;
 			}
-		else
+		else {
+			mutex_unlock(&priv->lock);
 			return -EINVAL;
+		}
 
+		mutex_unlock(&priv->lock);
 		return 0;
 	}
 
@@ -255,6 +277,8 @@
 	if (preset > 0xFFFFFF)
 		return -EINVAL;
 
+	mutex_lock(&priv->lock);
+
 	priv->preset[chan->channel] = preset;
 
 	/* Reset Byte Pointer */
@@ -264,6 +288,8 @@
 	for (i = 0; i < 3; i++)
 		outb(preset >> (8 * i), base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -293,6 +319,8 @@
 	/* Preset enable is active low in Input/Output Control register */
 	preset_enable = !preset_enable;
 
+	mutex_lock(&priv->lock);
+
 	priv->preset_enable[chan->channel] = preset_enable;
 
 	ior_cfg = priv->ab_enable[chan->channel] |
@@ -301,6 +329,8 @@
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -358,6 +388,8 @@
 	unsigned int mode_cfg = cnt_mode << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
 
+	mutex_lock(&priv->lock);
+
 	priv->count_mode[chan->channel] = cnt_mode;
 
 	/* Add quadrature mode configuration */
@@ -367,6 +399,8 @@
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -394,19 +428,26 @@
 	const struct iio_chan_spec *chan, unsigned int synchronous_mode)
 {
 	struct quad8_iio *const priv = iio_priv(indio_dev);
-	const unsigned int idr_cfg = synchronous_mode |
-		priv->index_polarity[chan->channel] << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
+	unsigned int idr_cfg = synchronous_mode;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->index_polarity[chan->channel] << 1;
 
 	/* Index function must be non-synchronous in non-quadrature mode */
-	if (synchronous_mode && !priv->quadrature_mode[chan->channel])
+	if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
+		mutex_unlock(&priv->lock);
 		return -EINVAL;
+	}
 
 	priv->synchronous_mode[chan->channel] = synchronous_mode;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -434,8 +475,12 @@
 	const struct iio_chan_spec *chan, unsigned int quadrature_mode)
 {
 	struct quad8_iio *const priv = iio_priv(indio_dev);
-	unsigned int mode_cfg = priv->count_mode[chan->channel] << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
+	unsigned int mode_cfg;
+
+	mutex_lock(&priv->lock);
+
+	mode_cfg = priv->count_mode[chan->channel] << 1;
 
 	if (quadrature_mode)
 		mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
@@ -453,6 +498,8 @@
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -480,15 +527,20 @@
 	const struct iio_chan_spec *chan, unsigned int index_polarity)
 {
 	struct quad8_iio *const priv = iio_priv(indio_dev);
-	const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] |
-		index_polarity << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
+	unsigned int idr_cfg = index_polarity << 1;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->synchronous_mode[chan->channel];
 
 	priv->index_polarity[chan->channel] = index_polarity;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -589,7 +641,7 @@
 static int quad8_count_read(struct counter_device *counter,
 	struct counter_count *count, unsigned long *val)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
 	unsigned int flags;
 	unsigned int borrow;
@@ -603,6 +655,8 @@
 	/* Borrow XOR Carry effectively doubles count range */
 	*val = (unsigned long)(borrow ^ carry) << 24;
 
+	mutex_lock(&priv->lock);
+
 	/* Reset Byte Pointer; transfer Counter to Output Latch */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
 	     base_offset + 1);
@@ -610,13 +664,15 @@
 	for (i = 0; i < 3; i++)
 		*val |= (unsigned long)inb(base_offset) << (8 * i);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
 static int quad8_count_write(struct counter_device *counter,
 	struct counter_count *count, unsigned long val)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
 	int i;
 
@@ -624,6 +680,8 @@
 	if (val > 0xFFFFFF)
 		return -EINVAL;
 
+	mutex_lock(&priv->lock);
+
 	/* Reset Byte Pointer */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
@@ -647,6 +705,8 @@
 	/* Reset Error flag */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -667,13 +727,13 @@
 static int quad8_function_get(struct counter_device *counter,
 	struct counter_count *count, size_t *function)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const int id = count->id;
-	const unsigned int quadrature_mode = priv->quadrature_mode[id];
-	const unsigned int scale = priv->quadrature_scale[id];
 
-	if (quadrature_mode)
-		switch (scale) {
+	mutex_lock(&priv->lock);
+
+	if (priv->quadrature_mode[id])
+		switch (priv->quadrature_scale[id]) {
 		case 0:
 			*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
 			break;
@@ -687,6 +747,8 @@
 	else
 		*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -697,10 +759,15 @@
 	const int id = count->id;
 	unsigned int *const quadrature_mode = priv->quadrature_mode + id;
 	unsigned int *const scale = priv->quadrature_scale + id;
-	unsigned int mode_cfg = priv->count_mode[id] << 1;
 	unsigned int *const synchronous_mode = priv->synchronous_mode + id;
-	const unsigned int idr_cfg = priv->index_polarity[id] << 1;
 	const int base_offset = priv->base + 2 * id + 1;
+	unsigned int mode_cfg;
+	unsigned int idr_cfg;
+
+	mutex_lock(&priv->lock);
+
+	mode_cfg = priv->count_mode[id] << 1;
+	idr_cfg = priv->index_polarity[id] << 1;
 
 	if (function == QUAD8_COUNT_FUNCTION_PULSE_DIRECTION) {
 		*quadrature_mode = 0;
@@ -736,6 +803,8 @@
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -852,15 +921,20 @@
 {
 	struct quad8_iio *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
-	const unsigned int idr_cfg = priv->synchronous_mode[channel_id] |
-		index_polarity << 1;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned int idr_cfg = index_polarity << 1;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->synchronous_mode[channel_id];
 
 	priv->index_polarity[channel_id] = index_polarity;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -887,19 +961,26 @@
 {
 	struct quad8_iio *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
-	const unsigned int idr_cfg = synchronous_mode |
-		priv->index_polarity[channel_id] << 1;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned int idr_cfg = synchronous_mode;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->index_polarity[channel_id] << 1;
 
 	/* Index function must be non-synchronous in non-quadrature mode */
-	if (synchronous_mode && !priv->quadrature_mode[channel_id])
+	if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
+		mutex_unlock(&priv->lock);
 		return -EINVAL;
+	}
 
 	priv->synchronous_mode[channel_id] = synchronous_mode;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -964,6 +1045,8 @@
 		break;
 	}
 
+	mutex_lock(&priv->lock);
+
 	priv->count_mode[count->id] = cnt_mode;
 
 	/* Set count mode configuration value */
@@ -976,6 +1059,8 @@
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -1017,6 +1102,8 @@
 	if (err)
 		return err;
 
+	mutex_lock(&priv->lock);
+
 	priv->ab_enable[count->id] = ab_enable;
 
 	ior_cfg = ab_enable | priv->preset_enable[count->id] << 1;
@@ -1024,6 +1111,8 @@
 	/* Load I/O control configuration */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1052,14 +1141,28 @@
 	return sprintf(buf, "%u\n", priv->preset[count->id]);
 }
 
+static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
+		unsigned int preset)
+{
+	const unsigned int base_offset = quad8iio->base + 2 * id;
+	int i;
+
+	quad8iio->preset[id] = preset;
+
+	/* Reset Byte Pointer */
+	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+
+	/* Set Preset Register */
+	for (i = 0; i < 3; i++)
+		outb(preset >> (8 * i), base_offset);
+}
+
 static ssize_t quad8_count_preset_write(struct counter_device *counter,
 	struct counter_count *count, void *private, const char *buf, size_t len)
 {
 	struct quad8_iio *const priv = counter->priv;
-	const int base_offset = priv->base + 2 * count->id;
 	unsigned int preset;
 	int ret;
-	int i;
 
 	ret = kstrtouint(buf, 0, &preset);
 	if (ret)
@@ -1069,14 +1172,11 @@
 	if (preset > 0xFFFFFF)
 		return -EINVAL;
 
-	priv->preset[count->id] = preset;
+	mutex_lock(&priv->lock);
 
-	/* Reset Byte Pointer */
-	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+	quad8_preset_register_set(priv, count->id, preset);
 
-	/* Set Preset Register */
-	for (i = 0; i < 3; i++)
-		outb(preset >> (8 * i), base_offset);
+	mutex_unlock(&priv->lock);
 
 	return len;
 }
@@ -1084,15 +1184,20 @@
 static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
 	struct counter_count *count, void *private, char *buf)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
+
+	mutex_lock(&priv->lock);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
-		return quad8_count_preset_read(counter, count, private, buf);
+		mutex_unlock(&priv->lock);
+		return sprintf(buf, "%u\n", priv->preset[count->id]);
 	}
 
+	mutex_unlock(&priv->lock);
+
 	/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
 	return sprintf(buf, "33554431\n");
 }
@@ -1101,15 +1206,29 @@
 	struct counter_count *count, void *private, const char *buf, size_t len)
 {
 	struct quad8_iio *const priv = counter->priv;
+	unsigned int ceiling;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &ceiling);
+	if (ret)
+		return ret;
+
+	/* Only 24-bit values are supported */
+	if (ceiling > 0xFFFFFF)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
-		return quad8_count_preset_write(counter, count, private, buf,
-						len);
+		quad8_preset_register_set(priv, count->id, ceiling);
+		break;
 	}
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1137,6 +1256,8 @@
 	/* Preset enable is active low in Input/Output Control register */
 	preset_enable = !preset_enable;
 
+	mutex_lock(&priv->lock);
+
 	priv->preset_enable[count->id] = preset_enable;
 
 	ior_cfg = priv->ab_enable[count->id] | (unsigned int)preset_enable << 1;
@@ -1144,6 +1265,8 @@
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1429,6 +1552,9 @@
 	quad8iio->counter.priv = quad8iio;
 	quad8iio->base = base[id];
 
+	/* Initialize mutex */
+	mutex_init(&quad8iio->lock);
+
 	/* Reset all counters and disable interrupt function */
 	outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
 	/* Set initial configuration for all counters */
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 4d1e25d..4d3429b 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -1059,7 +1059,7 @@
 
 	update_turbo_state();
 	if (global.turbo_disabled) {
-		pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
+		pr_notice_once("Turbo disabled by BIOS or unavailable on processor\n");
 		mutex_unlock(&intel_pstate_limits_lock);
 		mutex_unlock(&intel_pstate_driver_lock);
 		return -EPERM;
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index b7bb7c3..b2f9882 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -963,10 +963,12 @@
 	struct caam_drv_private_jr *jrp = dev_get_drvdata(jrdev);
 	struct aead_edesc *edesc;
 	int ecode = 0;
+	bool has_bklog;
 
 	dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
 
 	edesc = rctx->edesc;
+	has_bklog = edesc->bklog;
 
 	if (err)
 		ecode = caam_jr_strstatus(jrdev, err);
@@ -979,7 +981,7 @@
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		aead_request_complete(req, ecode);
 	else
 		crypto_finalize_aead_request(jrp->engine, req, ecode);
@@ -995,10 +997,12 @@
 	struct caam_drv_private_jr *jrp = dev_get_drvdata(jrdev);
 	int ivsize = crypto_skcipher_ivsize(skcipher);
 	int ecode = 0;
+	bool has_bklog;
 
 	dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
 
 	edesc = rctx->edesc;
+	has_bklog = edesc->bklog;
 	if (err)
 		ecode = caam_jr_strstatus(jrdev, err);
 
@@ -1028,7 +1032,7 @@
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		skcipher_request_complete(req, ecode);
 	else
 		crypto_finalize_skcipher_request(jrp->engine, req, ecode);
@@ -1711,7 +1715,7 @@
 
 	if (ivsize || mapped_dst_nents > 1)
 		sg_to_sec4_set_last(edesc->sec4_sg + dst_sg_idx +
-				    mapped_dst_nents);
+				    mapped_dst_nents - 1 + !!ivsize);
 
 	if (sec4_sg_bytes) {
 		edesc->sec4_sg_dma = dma_map_single(jrdev, edesc->sec4_sg,
diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c
index 943bc02..27ff4a3 100644
--- a/drivers/crypto/caam/caamhash.c
+++ b/drivers/crypto/caam/caamhash.c
@@ -583,10 +583,12 @@
 	struct caam_hash_state *state = ahash_request_ctx(req);
 	struct caam_hash_ctx *ctx = crypto_ahash_ctx(ahash);
 	int ecode = 0;
+	bool has_bklog;
 
 	dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
 
 	edesc = state->edesc;
+	has_bklog = edesc->bklog;
 
 	if (err)
 		ecode = caam_jr_strstatus(jrdev, err);
@@ -603,7 +605,7 @@
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		req->base.complete(&req->base, ecode);
 	else
 		crypto_finalize_hash_request(jrp->engine, req, ecode);
@@ -632,10 +634,12 @@
 	struct caam_hash_state *state = ahash_request_ctx(req);
 	int digestsize = crypto_ahash_digestsize(ahash);
 	int ecode = 0;
+	bool has_bklog;
 
 	dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
 
 	edesc = state->edesc;
+	has_bklog = edesc->bklog;
 	if (err)
 		ecode = caam_jr_strstatus(jrdev, err);
 
@@ -663,7 +667,7 @@
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		req->base.complete(&req->base, ecode);
 	else
 		crypto_finalize_hash_request(jrp->engine, req, ecode);
diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
index 4fcae37..2e44d68 100644
--- a/drivers/crypto/caam/caampkc.c
+++ b/drivers/crypto/caam/caampkc.c
@@ -121,11 +121,13 @@
 	struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
 	struct rsa_edesc *edesc;
 	int ecode = 0;
+	bool has_bklog;
 
 	if (err)
 		ecode = caam_jr_strstatus(dev, err);
 
 	edesc = req_ctx->edesc;
+	has_bklog = edesc->bklog;
 
 	rsa_pub_unmap(dev, edesc, req);
 	rsa_io_unmap(dev, edesc, req);
@@ -135,7 +137,7 @@
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		akcipher_request_complete(req, ecode);
 	else
 		crypto_finalize_akcipher_request(jrp->engine, req, ecode);
@@ -152,11 +154,13 @@
 	struct caam_rsa_req_ctx *req_ctx = akcipher_request_ctx(req);
 	struct rsa_edesc *edesc;
 	int ecode = 0;
+	bool has_bklog;
 
 	if (err)
 		ecode = caam_jr_strstatus(dev, err);
 
 	edesc = req_ctx->edesc;
+	has_bklog = edesc->bklog;
 
 	switch (key->priv_form) {
 	case FORM1:
@@ -176,7 +180,7 @@
 	 * If no backlog flag, the completion of the request is done
 	 * by CAAM, not crypto engine.
 	 */
-	if (!edesc->bklog)
+	if (!has_bklog)
 		akcipher_request_complete(req, ecode);
 	else
 		crypto_finalize_akcipher_request(jrp->engine, req, ecode);
diff --git a/drivers/crypto/chelsio/chcr_ktls.c b/drivers/crypto/chelsio/chcr_ktls.c
index cd1769e..43d9e24 100644
--- a/drivers/crypto/chelsio/chcr_ktls.c
+++ b/drivers/crypto/chelsio/chcr_ktls.c
@@ -120,12 +120,10 @@
 static int chcr_ktls_update_connection_state(struct chcr_ktls_info *tx_info,
 					     int new_state)
 {
-	unsigned long flags;
-
 	/* This function can be called from both rx (interrupt context) and tx
 	 * queue contexts.
 	 */
-	spin_lock_irqsave(&tx_info->lock, flags);
+	spin_lock_bh(&tx_info->lock);
 	switch (tx_info->connection_state) {
 	case KTLS_CONN_CLOSED:
 		tx_info->connection_state = new_state;
@@ -169,7 +167,7 @@
 		pr_err("unknown KTLS connection state\n");
 		break;
 	}
-	spin_unlock_irqrestore(&tx_info->lock, flags);
+	spin_unlock_bh(&tx_info->lock);
 
 	return tx_info->connection_state;
 }
@@ -675,41 +673,14 @@
 	return 0;
 }
 
-/*
- * chcr_write_cpl_set_tcb_ulp: update tcb values.
- * TCB is responsible to create tcp headers, so all the related values
- * should be correctly updated.
- * @tx_info - driver specific tls info.
- * @q - tx queue on which packet is going out.
- * @tid - TCB identifier.
- * @pos - current index where should we start writing.
- * @word - TCB word.
- * @mask - TCB word related mask.
- * @val - TCB word related value.
- * @reply - set 1 if looking for TP response.
- * return - next position to write.
- */
-static void *chcr_write_cpl_set_tcb_ulp(struct chcr_ktls_info *tx_info,
-					struct sge_eth_txq *q, u32 tid,
-					void *pos, u16 word, u64 mask,
+static void *__chcr_write_cpl_set_tcb_ulp(struct chcr_ktls_info *tx_info,
+					u32 tid, void *pos, u16 word, u64 mask,
 					u64 val, u32 reply)
 {
 	struct cpl_set_tcb_field_core *cpl;
 	struct ulptx_idata *idata;
 	struct ulp_txpkt *txpkt;
-	void *save_pos = NULL;
-	u8 buf[48] = {0};
-	int left;
 
-	left = (void *)q->q.stat - pos;
-	if (unlikely(left < CHCR_SET_TCB_FIELD_LEN)) {
-		if (!left) {
-			pos = q->q.desc;
-		} else {
-			save_pos = pos;
-			pos = buf;
-		}
-	}
 	/* ULP_TXPKT */
 	txpkt = pos;
 	txpkt->cmd_dest = htonl(ULPTX_CMD_V(ULP_TX_PKT) | ULP_TXPKT_DEST_V(0));
@@ -734,18 +705,54 @@
 	idata = (struct ulptx_idata *)(cpl + 1);
 	idata->cmd_more = htonl(ULPTX_CMD_V(ULP_TX_SC_NOOP));
 	idata->len = htonl(0);
+	pos = idata + 1;
 
-	if (save_pos) {
-		pos = chcr_copy_to_txd(buf, &q->q, save_pos,
-				       CHCR_SET_TCB_FIELD_LEN);
-	} else {
-		/* check again if we are at the end of the queue */
-		if (left == CHCR_SET_TCB_FIELD_LEN)
+	return pos;
+}
+
+
+/*
+ * chcr_write_cpl_set_tcb_ulp: update tcb values.
+ * TCB is responsible to create tcp headers, so all the related values
+ * should be correctly updated.
+ * @tx_info - driver specific tls info.
+ * @q - tx queue on which packet is going out.
+ * @tid - TCB identifier.
+ * @pos - current index where should we start writing.
+ * @word - TCB word.
+ * @mask - TCB word related mask.
+ * @val - TCB word related value.
+ * @reply - set 1 if looking for TP response.
+ * return - next position to write.
+ */
+static void *chcr_write_cpl_set_tcb_ulp(struct chcr_ktls_info *tx_info,
+					struct sge_eth_txq *q, u32 tid,
+					void *pos, u16 word, u64 mask,
+					u64 val, u32 reply)
+{
+	int left = (void *)q->q.stat - pos;
+
+	if (unlikely(left < CHCR_SET_TCB_FIELD_LEN)) {
+		if (!left) {
 			pos = q->q.desc;
-		else
-			pos = idata + 1;
+		} else {
+			u8 buf[48] = {0};
+
+			__chcr_write_cpl_set_tcb_ulp(tx_info, tid, buf, word,
+						     mask, val, reply);
+
+			return chcr_copy_to_txd(buf, &q->q, pos,
+						CHCR_SET_TCB_FIELD_LEN);
+		}
 	}
 
+	pos = __chcr_write_cpl_set_tcb_ulp(tx_info, tid, pos, word,
+					   mask, val, reply);
+
+	/* check again if we are at the end of the queue */
+	if (left == CHCR_SET_TCB_FIELD_LEN)
+		pos = q->q.desc;
+
 	return pos;
 }
 
diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index ccc9eda..07df88f 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -388,7 +388,8 @@
 
 		return ret;
 
-	case DMA_BUF_SET_NAME:
+	case DMA_BUF_SET_NAME_A:
+	case DMA_BUF_SET_NAME_B:
 		return dma_buf_set_name(dmabuf, (const char __user *)arg);
 
 	default:
@@ -655,8 +656,8 @@
  * calls attach() of dma_buf_ops to allow device-specific attach functionality
  * @dmabuf:		[in]	buffer to attach device to.
  * @dev:		[in]	device to be attached.
- * @importer_ops	[in]	importer operations for the attachment
- * @importer_priv	[in]	importer private pointer for the attachment
+ * @importer_ops:	[in]	importer operations for the attachment
+ * @importer_priv:	[in]	importer private pointer for the attachment
  *
  * Returns struct dma_buf_attachment pointer for this attachment. Attachments
  * must be cleaned up by calling dma_buf_detach().
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 0924836..023db68 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -241,7 +241,8 @@
 
 config HISI_DMA
 	tristate "HiSilicon DMA Engine support"
-	depends on ARM64 || (COMPILE_TEST && PCI_MSI)
+	depends on ARM64 || COMPILE_TEST
+	depends on PCI_MSI
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 4830ba6..d31076d 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -232,10 +232,6 @@
 	struct dma_chan_dev *chan_dev;
 
 	chan_dev = container_of(dev, typeof(*chan_dev), device);
-	if (atomic_dec_and_test(chan_dev->idr_ref)) {
-		ida_free(&dma_ida, chan_dev->dev_id);
-		kfree(chan_dev->idr_ref);
-	}
 	kfree(chan_dev);
 }
 
@@ -1043,27 +1039,9 @@
 }
 
 static int __dma_async_device_channel_register(struct dma_device *device,
-					       struct dma_chan *chan,
-					       int chan_id)
+					       struct dma_chan *chan)
 {
 	int rc = 0;
-	int chancnt = device->chancnt;
-	atomic_t *idr_ref;
-	struct dma_chan *tchan;
-
-	tchan = list_first_entry_or_null(&device->channels,
-					 struct dma_chan, device_node);
-	if (!tchan)
-		return -ENODEV;
-
-	if (tchan->dev) {
-		idr_ref = tchan->dev->idr_ref;
-	} else {
-		idr_ref = kmalloc(sizeof(*idr_ref), GFP_KERNEL);
-		if (!idr_ref)
-			return -ENOMEM;
-		atomic_set(idr_ref, 0);
-	}
 
 	chan->local = alloc_percpu(typeof(*chan->local));
 	if (!chan->local)
@@ -1079,29 +1057,36 @@
 	 * When the chan_id is a negative value, we are dynamically adding
 	 * the channel. Otherwise we are static enumerating.
 	 */
-	chan->chan_id = chan_id < 0 ? chancnt : chan_id;
+	mutex_lock(&device->chan_mutex);
+	chan->chan_id = ida_alloc(&device->chan_ida, GFP_KERNEL);
+	mutex_unlock(&device->chan_mutex);
+	if (chan->chan_id < 0) {
+		pr_err("%s: unable to alloc ida for chan: %d\n",
+		       __func__, chan->chan_id);
+		goto err_out;
+	}
+
 	chan->dev->device.class = &dma_devclass;
 	chan->dev->device.parent = device->dev;
 	chan->dev->chan = chan;
-	chan->dev->idr_ref = idr_ref;
 	chan->dev->dev_id = device->dev_id;
-	atomic_inc(idr_ref);
 	dev_set_name(&chan->dev->device, "dma%dchan%d",
 		     device->dev_id, chan->chan_id);
-
 	rc = device_register(&chan->dev->device);
 	if (rc)
-		goto err_out;
+		goto err_out_ida;
 	chan->client_count = 0;
-	device->chancnt = chan->chan_id + 1;
+	device->chancnt++;
 
 	return 0;
 
+ err_out_ida:
+	mutex_lock(&device->chan_mutex);
+	ida_free(&device->chan_ida, chan->chan_id);
+	mutex_unlock(&device->chan_mutex);
  err_out:
 	free_percpu(chan->local);
 	kfree(chan->dev);
-	if (atomic_dec_return(idr_ref) == 0)
-		kfree(idr_ref);
 	return rc;
 }
 
@@ -1110,7 +1095,7 @@
 {
 	int rc;
 
-	rc = __dma_async_device_channel_register(device, chan, -1);
+	rc = __dma_async_device_channel_register(device, chan);
 	if (rc < 0)
 		return rc;
 
@@ -1130,6 +1115,9 @@
 	device->chancnt--;
 	chan->dev->chan = NULL;
 	mutex_unlock(&dma_list_mutex);
+	mutex_lock(&device->chan_mutex);
+	ida_free(&device->chan_ida, chan->chan_id);
+	mutex_unlock(&device->chan_mutex);
 	device_unregister(&chan->dev->device);
 	free_percpu(chan->local);
 }
@@ -1152,7 +1140,7 @@
  */
 int dma_async_device_register(struct dma_device *device)
 {
-	int rc, i = 0;
+	int rc;
 	struct dma_chan* chan;
 
 	if (!device)
@@ -1257,9 +1245,12 @@
 	if (rc != 0)
 		return rc;
 
+	mutex_init(&device->chan_mutex);
+	ida_init(&device->chan_ida);
+
 	/* represent channels in sysfs. Probably want devs too */
 	list_for_each_entry(chan, &device->channels, device_node) {
-		rc = __dma_async_device_channel_register(device, chan, i++);
+		rc = __dma_async_device_channel_register(device, chan);
 		if (rc < 0)
 			goto err_out;
 	}
@@ -1334,6 +1325,7 @@
 	 */
 	dma_cap_set(DMA_PRIVATE, device->cap_mask);
 	dma_channel_rebalance();
+	ida_free(&dma_ida, device->dev_id);
 	dma_device_put(device);
 	mutex_unlock(&dma_list_mutex);
 }
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index a2cadfa..364dd34 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -240,7 +240,7 @@
 		struct dmatest_thread *thread;
 
 		list_for_each_entry(thread, &dtc->threads, node) {
-			if (!thread->done)
+			if (!thread->done && !thread->pending)
 				return true;
 		}
 	}
@@ -662,8 +662,8 @@
 		flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
 
 	ktime = ktime_get();
-	while (!kthread_should_stop()
-	       && !(params->iterations && total_tests >= params->iterations)) {
+	while (!(kthread_should_stop() ||
+	       (params->iterations && total_tests >= params->iterations))) {
 		struct dma_async_tx_descriptor *tx = NULL;
 		struct dmaengine_unmap_data *um;
 		dma_addr_t *dsts;
diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c
index 10117f2..d683232 100644
--- a/drivers/dma/mmp_tdma.c
+++ b/drivers/dma/mmp_tdma.c
@@ -363,6 +363,8 @@
 		gen_pool_free(gpool, (unsigned long)tdmac->desc_arr,
 				size);
 	tdmac->desc_arr = NULL;
+	if (tdmac->status == DMA_ERROR)
+		tdmac->status = DMA_COMPLETE;
 
 	return;
 }
@@ -443,7 +445,8 @@
 	if (!desc)
 		goto err_out;
 
-	mmp_tdma_config_write(chan, direction, &tdmac->slave_config);
+	if (mmp_tdma_config_write(chan, direction, &tdmac->slave_config))
+		goto err_out;
 
 	while (buf < buf_len) {
 		desc = &tdmac->desc_arr[i];
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 581e7a2..a3b0b4c 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -865,6 +865,7 @@
 	}
 
 	pci_set_master(pdev);
+	pd->dma.dev = &pdev->dev;
 
 	err = request_irq(pdev->irq, pd_irq, IRQF_SHARED, DRV_NAME, pd);
 	if (err) {
@@ -880,7 +881,6 @@
 		goto err_free_irq;
 	}
 
-	pd->dma.dev = &pdev->dev;
 
 	INIT_LIST_HEAD(&pd->dma.channels);
 
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index f6a2f42..b9f0d96 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -816,6 +816,13 @@
 static void tegra_dma_synchronize(struct dma_chan *dc)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
+	int err;
+
+	err = pm_runtime_get_sync(tdc->tdma->dev);
+	if (err < 0) {
+		dev_err(tdc2dev(tdc), "Failed to synchronize DMA: %d\n", err);
+		return;
+	}
 
 	/*
 	 * CPU, which handles interrupt, could be busy in
@@ -825,6 +832,8 @@
 	wait_event(tdc->wq, tegra_dma_eoc_interrupt_deasserted(tdc));
 
 	tasklet_kill(&tdc->tasklet);
+
+	pm_runtime_put(tdc->tdma->dev);
 }
 
 static unsigned int tegra_dma_sg_bytes_xferred(struct tegra_dma_channel *tdc,
diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c
index d7b9650..fb7c815 100644
--- a/drivers/dma/ti/k3-psil.c
+++ b/drivers/dma/ti/k3-psil.c
@@ -27,6 +27,7 @@
 			soc_ep_map = &j721e_ep_map;
 		} else {
 			pr_err("PSIL: No compatible machine found for map\n");
+			mutex_unlock(&ep_map_mutex);
 			return ERR_PTR(-ENOTSUPP);
 		}
 		pr_debug("%s: Using map for %s\n", __func__, soc_ep_map->name);
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index aecd5a3..5429497 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1230,16 +1230,16 @@
 		return ret;
 
 	spin_lock_irqsave(&chan->lock, flags);
-
-	desc = list_last_entry(&chan->active_list,
-			       struct xilinx_dma_tx_descriptor, node);
-	/*
-	 * VDMA and simple mode do not support residue reporting, so the
-	 * residue field will always be 0.
-	 */
-	if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
-		residue = xilinx_dma_get_residue(chan, desc);
-
+	if (!list_empty(&chan->active_list)) {
+		desc = list_last_entry(&chan->active_list,
+				       struct xilinx_dma_tx_descriptor, node);
+		/*
+		 * VDMA and simple mode do not support residue reporting, so the
+		 * residue field will always be 0.
+		 */
+		if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
+			residue = xilinx_dma_get_residue(chan, desc);
+	}
 	spin_unlock_irqrestore(&chan->lock, flags);
 
 	dma_set_residue(txstate, residue);
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index b1af0de..9d25129 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -101,7 +101,7 @@
 		if (!len)
 			len = snprintf(buf, sizeof(buf), "%s%s", pfx, str);
 		else
-			len += snprintf(buf+len, sizeof(buf)-len, ", %s", str);
+			len += scnprintf(buf+len, sizeof(buf)-len, ", %s", str);
 	}
 	if (len)
 		printk("%s\n", buf);
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index cc90a74..67d2694 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -25,7 +25,7 @@
 #define EFI_ALLOC_ALIGN		EFI_PAGE_SIZE
 #endif
 
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_X86)
 #define __efistub_global	__section(.data)
 #else
 #define __efistub_global
diff --git a/drivers/firmware/efi/libstub/file.c b/drivers/firmware/efi/libstub/file.c
index d4c7e5f..ea66b1f1 100644
--- a/drivers/firmware/efi/libstub/file.c
+++ b/drivers/firmware/efi/libstub/file.c
@@ -29,30 +29,31 @@
  */
 #define EFI_READ_CHUNK_SIZE	SZ_1M
 
+struct finfo {
+	efi_file_info_t info;
+	efi_char16_t	filename[MAX_FILENAME_SIZE];
+};
+
 static efi_status_t efi_open_file(efi_file_protocol_t *volume,
-				  efi_char16_t *filename_16,
+				  struct finfo *fi,
 				  efi_file_protocol_t **handle,
 				  unsigned long *file_size)
 {
-	struct {
-		efi_file_info_t info;
-		efi_char16_t	filename[MAX_FILENAME_SIZE];
-	} finfo;
 	efi_guid_t info_guid = EFI_FILE_INFO_ID;
 	efi_file_protocol_t *fh;
 	unsigned long info_sz;
 	efi_status_t status;
 
-	status = volume->open(volume, &fh, filename_16, EFI_FILE_MODE_READ, 0);
+	status = volume->open(volume, &fh, fi->filename, EFI_FILE_MODE_READ, 0);
 	if (status != EFI_SUCCESS) {
 		pr_efi_err("Failed to open file: ");
-		efi_char16_printk(filename_16);
+		efi_char16_printk(fi->filename);
 		efi_printk("\n");
 		return status;
 	}
 
-	info_sz = sizeof(finfo);
-	status = fh->get_info(fh, &info_guid, &info_sz, &finfo);
+	info_sz = sizeof(struct finfo);
+	status = fh->get_info(fh, &info_guid, &info_sz, fi);
 	if (status != EFI_SUCCESS) {
 		pr_efi_err("Failed to get file info\n");
 		fh->close(fh);
@@ -60,7 +61,7 @@
 	}
 
 	*handle = fh;
-	*file_size = finfo.info.file_size;
+	*file_size = fi->info.file_size;
 	return EFI_SUCCESS;
 }
 
@@ -146,13 +147,13 @@
 
 	alloc_addr = alloc_size = 0;
 	do {
-		efi_char16_t filename[MAX_FILENAME_SIZE];
+		struct finfo fi;
 		unsigned long size;
 		void *addr;
 
 		offset = find_file_option(cmdline, cmdline_len,
 					  optstr, optstr_size,
-					  filename, ARRAY_SIZE(filename));
+					  fi.filename, ARRAY_SIZE(fi.filename));
 
 		if (!offset)
 			break;
@@ -166,7 +167,7 @@
 				return status;
 		}
 
-		status = efi_open_file(volume, filename, &file, &size);
+		status = efi_open_file(volume, &fi, &file, &size);
 		if (status != EFI_SUCCESS)
 			goto err_close_volume;
 
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 8d3a707..05ccb22 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -20,7 +20,7 @@
 /* Maximum physical address for 64-bit kernel with 4-level paging */
 #define MAXMEM_X86_64_4LEVEL (1ull << 46)
 
-static efi_system_table_t *sys_table;
+static efi_system_table_t *sys_table __efistub_global;
 extern const bool efi_is64;
 extern u32 image_offset;
 
@@ -392,8 +392,6 @@
 	image_base = efi_table_attr(image, image_base);
 	image_offset = (void *)startup_32 - image_base;
 
-	hdr = &((struct boot_params *)image_base)->hdr;
-
 	status = efi_allocate_pages(0x4000, (unsigned long *)&boot_params, ULONG_MAX);
 	if (status != EFI_SUCCESS) {
 		efi_printk("Failed to allocate lowmem for boot params\n");
@@ -742,8 +740,15 @@
 	 * now use KERNEL_IMAGE_SIZE, which will be 512MiB, the same as what
 	 * KASLR uses.
 	 *
-	 * Also relocate it if image_offset is zero, i.e. we weren't loaded by
-	 * LoadImage, but we are not aligned correctly.
+	 * Also relocate it if image_offset is zero, i.e. the kernel wasn't
+	 * loaded by LoadImage, but rather by a bootloader that called the
+	 * handover entry. The reason we must always relocate in this case is
+	 * to handle the case of systemd-boot booting a unified kernel image,
+	 * which is a PE executable that contains the bzImage and an initrd as
+	 * COFF sections. The initrd section is placed after the bzImage
+	 * without ensuring that there are at least init_size bytes available
+	 * for the bzImage, and thus the compressed kernel's startup code may
+	 * overwrite the initrd unless it is moved out of the way.
 	 */
 
 	buffer_start = ALIGN(bzimage_addr - image_offset,
@@ -753,8 +758,7 @@
 	if ((buffer_start < LOAD_PHYSICAL_ADDR)				     ||
 	    (IS_ENABLED(CONFIG_X86_32) && buffer_end > KERNEL_IMAGE_SIZE)    ||
 	    (IS_ENABLED(CONFIG_X86_64) && buffer_end > MAXMEM_X86_64_4LEVEL) ||
-	    (image_offset == 0 && !IS_ALIGNED(bzimage_addr,
-					      hdr->kernel_alignment))) {
+	    (image_offset == 0)) {
 		status = efi_relocate_kernel(&bzimage_addr,
 					     hdr->init_size, hdr->init_size,
 					     hdr->pref_address,
diff --git a/drivers/firmware/efi/tpm.c b/drivers/firmware/efi/tpm.c
index 31f9f0e..55b031d 100644
--- a/drivers/firmware/efi/tpm.c
+++ b/drivers/firmware/efi/tpm.c
@@ -16,7 +16,7 @@
 int efi_tpm_final_log_size;
 EXPORT_SYMBOL(efi_tpm_final_log_size);
 
-static int tpm2_calc_event_log_size(void *data, int count, void *size_info)
+static int __init tpm2_calc_event_log_size(void *data, int count, void *size_info)
 {
 	struct tcg_pcr_event2_head *header;
 	int event_size, size = 0;
diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
index 116707a..1d2e5b8 100644
--- a/drivers/firmware/imx/Kconfig
+++ b/drivers/firmware/imx/Kconfig
@@ -12,7 +12,7 @@
 
 config IMX_SCU
 	bool "IMX SCU Protocol driver"
-	depends on IMX_MBOX || COMPILE_TEST
+	depends on IMX_MBOX
 	help
 	  The System Controller Firmware (SCFW) is a low-level system function
 	  which runs on a dedicated Cortex-M core to provide power, clock, and
@@ -24,6 +24,6 @@
 
 config IMX_SCU_PD
 	bool "IMX SCU Power Domain driver"
-	depends on IMX_SCU || COMPILE_TEST
+	depends on IMX_SCU
 	help
 	  The System Controller Firmware (SCFW) based power domain driver.
diff --git a/drivers/firmware/xilinx/zynqmp-debug.c b/drivers/firmware/xilinx/zynqmp-debug.c
index c6d0724..43bc6cf 100644
--- a/drivers/firmware/xilinx/zynqmp-debug.c
+++ b/drivers/firmware/xilinx/zynqmp-debug.c
@@ -35,7 +35,7 @@
 	PM_API(PM_QUERY_DATA),
 };
 
-struct dentry *firmware_debugfs_root;
+static struct dentry *firmware_debugfs_root;
 
 /**
  * zynqmp_pm_argument_value() - Extract argument value from a PM-API request
diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
index 89ca292..5387550 100644
--- a/drivers/fpga/dfl-pci.c
+++ b/drivers/fpga/dfl-pci.c
@@ -248,11 +248,13 @@
 			return ret;
 
 		ret = pci_enable_sriov(pcidev, num_vfs);
-		if (ret)
+		if (ret) {
 			dfl_fpga_cdev_config_ports_pf(cdev);
+			return ret;
+		}
 	}
 
-	return ret;
+	return num_vfs;
 }
 
 static void cci_pci_remove(struct pci_dev *pcidev)
diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c
index ee776504..07fa8d9 100644
--- a/drivers/fpga/zynq-fpga.c
+++ b/drivers/fpga/zynq-fpga.c
@@ -583,7 +583,8 @@
 
 	priv->clk = devm_clk_get(dev, "ref_clk");
 	if (IS_ERR(priv->clk)) {
-		dev_err(dev, "input clock not found\n");
+		if (PTR_ERR(priv->clk) != -EPROBE_DEFER)
+			dev_err(dev, "input clock not found\n");
 		return PTR_ERR(priv->clk);
 	}
 
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 5638b4e5..4269ea9 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -531,7 +531,7 @@
 {
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
 
-	switch (config) {
+	switch (pinconf_to_config_param(config)) {
 	case PIN_CONFIG_BIAS_PULL_UP:
 	case PIN_CONFIG_BIAS_PULL_DOWN:
 		return pca953x_gpio_set_pull_up_down(chip, offset, config);
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index acb99ef..8656815 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -368,6 +368,7 @@
 	struct tegra_gpio_info *tgi = bank->tgi;
 	unsigned int gpio = d->hwirq;
 
+	tegra_gpio_irq_mask(d);
 	gpiochip_unlock_as_irq(&tgi->gc, gpio);
 }
 
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 40f2d7f..182136d 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1158,8 +1158,19 @@
 				  struct gpioline_info *info)
 {
 	struct gpio_chip *gc = desc->gdev->chip;
+	bool ok_for_pinctrl;
 	unsigned long flags;
 
+	/*
+	 * This function takes a mutex so we must check this before taking
+	 * the spinlock.
+	 *
+	 * FIXME: find a non-racy way to retrieve this information. Maybe a
+	 * lock common to both frameworks?
+	 */
+	ok_for_pinctrl =
+		pinctrl_gpio_can_use_line(gc->base + info->line_offset);
+
 	spin_lock_irqsave(&gpio_lock, flags);
 
 	if (desc->name) {
@@ -1186,7 +1197,7 @@
 	    test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
 	    test_bit(FLAG_EXPORT, &desc->flags) ||
 	    test_bit(FLAG_SYSFS, &desc->flags) ||
-	    !pinctrl_gpio_can_use_line(gc->base + info->line_offset))
+	    !ok_for_pinctrl)
 		info->flags |= GPIOLINE_FLAG_KERNEL;
 	if (test_bit(FLAG_IS_OUT, &desc->flags))
 		info->flags |= GPIOLINE_FLAG_IS_OUT;
@@ -1227,6 +1238,7 @@
 	void __user *ip = (void __user *)arg;
 	struct gpio_desc *desc;
 	__u32 offset;
+	int hwgpio;
 
 	/* We fail any subsequent ioctl():s when the chip is gone */
 	if (!gc)
@@ -1259,13 +1271,19 @@
 		if (IS_ERR(desc))
 			return PTR_ERR(desc);
 
+		hwgpio = gpio_chip_hwgpio(desc);
+
+		if (cmd == GPIO_GET_LINEINFO_WATCH_IOCTL &&
+		    test_bit(hwgpio, priv->watched_lines))
+			return -EBUSY;
+
 		gpio_desc_to_lineinfo(desc, &lineinfo);
 
 		if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
 			return -EFAULT;
 
 		if (cmd == GPIO_GET_LINEINFO_WATCH_IOCTL)
-			set_bit(gpio_chip_hwgpio(desc), priv->watched_lines);
+			set_bit(hwgpio, priv->watched_lines);
 
 		return 0;
 	} else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) {
@@ -1280,7 +1298,12 @@
 		if (IS_ERR(desc))
 			return PTR_ERR(desc);
 
-		clear_bit(gpio_chip_hwgpio(desc), priv->watched_lines);
+		hwgpio = gpio_chip_hwgpio(desc);
+
+		if (!test_bit(hwgpio, priv->watched_lines))
+			return -EBUSY;
+
+		clear_bit(hwgpio, priv->watched_lines);
 		return 0;
 	}
 	return -EINVAL;
@@ -5289,8 +5312,9 @@
 	gpiolib_initialized = true;
 	gpiochip_setup_devs();
 
-	if (IS_ENABLED(CONFIG_OF_DYNAMIC))
-		WARN_ON(of_reconfig_notifier_register(&gpio_of_notifier));
+#if IS_ENABLED(CONFIG_OF_DYNAMIC) && IS_ENABLED(CONFIG_OF_GPIO)
+	WARN_ON(of_reconfig_notifier_register(&gpio_of_notifier));
+#endif /* CONFIG_OF_DYNAMIC && CONFIG_OF_GPIO */
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 2992a49..8ac1581 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -945,6 +945,7 @@
 
 	/* s3/s4 mask */
 	bool                            in_suspend;
+	bool				in_hibernate;
 
 	/* record last mm index being written through WREG32*/
 	unsigned long last_mm_index;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
index 9dff792..6a5b91d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
@@ -1343,7 +1343,7 @@
 	}
 
 	/* Free the BO*/
-	amdgpu_bo_unref(&mem->bo);
+	drm_gem_object_put_unlocked(&mem->bo->tbo.base);
 	mutex_destroy(&mem->lock);
 	kfree(mem);
 
@@ -1688,7 +1688,8 @@
 		| KFD_IOC_ALLOC_MEM_FLAGS_WRITABLE
 		| KFD_IOC_ALLOC_MEM_FLAGS_EXECUTABLE;
 
-	(*mem)->bo = amdgpu_bo_ref(bo);
+	drm_gem_object_get(&bo->tbo.base);
+	(*mem)->bo = bo;
 	(*mem)->va = va;
 	(*mem)->domain = (bo->preferred_domains & AMDGPU_GEM_DOMAIN_VRAM) ?
 		AMDGPU_GEM_DOMAIN_VRAM : AMDGPU_GEM_DOMAIN_GTT;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 559dc24..affde2d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2008,8 +2008,24 @@
  */
 static bool amdgpu_device_check_vram_lost(struct amdgpu_device *adev)
 {
-	return !!memcmp(adev->gart.ptr, adev->reset_magic,
-			AMDGPU_RESET_MAGIC_NUM);
+	if (memcmp(adev->gart.ptr, adev->reset_magic,
+			AMDGPU_RESET_MAGIC_NUM))
+		return true;
+
+	if (!adev->in_gpu_reset)
+		return false;
+
+	/*
+	 * For all ASICs with baco/mode1 reset, the VRAM is
+	 * always assumed to be lost.
+	 */
+	switch (amdgpu_asic_reset_method(adev)) {
+	case AMD_RESET_METHOD_BACO:
+	case AMD_RESET_METHOD_MODE1:
+		return true;
+	default:
+		return false;
+	}
 }
 
 /**
@@ -2340,6 +2356,8 @@
 {
 	int i, r;
 
+	amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE);
+	amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE);
 
 	for (i = adev->num_ip_blocks - 1; i >= 0; i--) {
 		if (!adev->ip_blocks[i].status.valid)
@@ -3354,15 +3372,12 @@
 		}
 	}
 
-	amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE);
-	amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE);
-
-	amdgpu_amdkfd_suspend(adev, !fbcon);
-
 	amdgpu_ras_suspend(adev);
 
 	r = amdgpu_device_ip_suspend_phase1(adev);
 
+	amdgpu_amdkfd_suspend(adev, !fbcon);
+
 	/* evict vram memory */
 	amdgpu_bo_evict_vram(adev);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 8ea86ff..a735d79 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -85,9 +85,10 @@
  * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
  * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
  * - 3.36.0 - Allow reading more status registers on si/cik
+ * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
  */
 #define KMS_DRIVER_MAJOR	3
-#define KMS_DRIVER_MINOR	36
+#define KMS_DRIVER_MINOR	37
 #define KMS_DRIVER_PATCHLEVEL	0
 
 int amdgpu_vram_limit = 0;
@@ -1180,7 +1181,9 @@
 	struct amdgpu_device *adev = drm_dev->dev_private;
 	int r;
 
+	adev->in_hibernate = true;
 	r = amdgpu_device_suspend(drm_dev, true);
+	adev->in_hibernate = false;
 	if (r)
 		return r;
 	return amdgpu_asic_reset(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
index 9ae7b61..25ddb48 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
@@ -133,8 +133,7 @@
 	u32 cpp;
 	u64 flags = AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED |
 			       AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS     |
-			       AMDGPU_GEM_CREATE_VRAM_CLEARED 	     |
-			       AMDGPU_GEM_CREATE_CPU_GTT_USWC;
+			       AMDGPU_GEM_CREATE_VRAM_CLEARED;
 
 	info = drm_get_format_info(adev->ddev, mode_cmd);
 	cpp = info->cpp[0];
diff --git a/drivers/gpu/drm/amd/amdgpu/cik.c b/drivers/gpu/drm/amd/amdgpu/cik.c
index 006f21e..62635e5 100644
--- a/drivers/gpu/drm/amd/amdgpu/cik.c
+++ b/drivers/gpu/drm/amd/amdgpu/cik.c
@@ -1358,8 +1358,6 @@
 	int r;
 
 	if (cik_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		r = amdgpu_dpm_baco_reset(adev);
 	} else {
 		r = cik_asic_pci_config_reset(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index d78059f..0e0daf0 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -279,7 +279,7 @@
 
 #define DEFAULT_SH_MEM_CONFIG \
 	((SH_MEM_ADDRESS_MODE_64 << SH_MEM_CONFIG__ADDRESS_MODE__SHIFT) | \
-	 (SH_MEM_ALIGNMENT_MODE_DWORD << SH_MEM_CONFIG__ALIGNMENT_MODE__SHIFT) | \
+	 (SH_MEM_ALIGNMENT_MODE_UNALIGNED << SH_MEM_CONFIG__ALIGNMENT_MODE__SHIFT) | \
 	 (SH_MEM_RETRY_MODE_ALL << SH_MEM_CONFIG__RETRY_MODE__SHIFT) | \
 	 (3 << SH_MEM_CONFIG__INITIAL_INST_PREFETCH__SHIFT))
 
@@ -4273,7 +4273,7 @@
 		/* ===  CGCG /CGLS for GFX 3D Only === */
 		gfx_v10_0_update_3d_clock_gating(adev, enable);
 		/* ===  MGCG + MGLS === */
-		/* gfx_v10_0_update_medium_grain_clock_gating(adev, enable); */
+		gfx_v10_0_update_medium_grain_clock_gating(adev, enable);
 	}
 
 	if (adev->cg_flags &
@@ -4353,11 +4353,7 @@
 	switch (adev->asic_type) {
 	case CHIP_NAVI10:
 	case CHIP_NAVI14:
-		if (!enable) {
-			amdgpu_gfx_off_ctrl(adev, false);
-			cancel_delayed_work_sync(&adev->gfx.gfx_off_delay_work);
-		} else
-			amdgpu_gfx_off_ctrl(adev, true);
+		amdgpu_gfx_off_ctrl(adev, enable);
 		break;
 	default:
 		break;
@@ -4918,6 +4914,19 @@
 							   ref, mask);
 }
 
+static void gfx_v10_0_ring_soft_recovery(struct amdgpu_ring *ring,
+					 unsigned vmid)
+{
+	struct amdgpu_device *adev = ring->adev;
+	uint32_t value = 0;
+
+	value = REG_SET_FIELD(value, SQ_CMD, CMD, 0x03);
+	value = REG_SET_FIELD(value, SQ_CMD, MODE, 0x01);
+	value = REG_SET_FIELD(value, SQ_CMD, CHECK_VMID, 1);
+	value = REG_SET_FIELD(value, SQ_CMD, VM_ID, vmid);
+	WREG32_SOC15(GC, 0, mmSQ_CMD, value);
+}
+
 static void
 gfx_v10_0_set_gfx_eop_interrupt_state(struct amdgpu_device *adev,
 				      uint32_t me, uint32_t pipe,
@@ -5309,6 +5318,7 @@
 	.emit_wreg = gfx_v10_0_ring_emit_wreg,
 	.emit_reg_wait = gfx_v10_0_ring_emit_reg_wait,
 	.emit_reg_write_reg_wait = gfx_v10_0_ring_emit_reg_write_reg_wait,
+	.soft_recovery = gfx_v10_0_ring_soft_recovery,
 };
 
 static const struct amdgpu_ring_funcs gfx_v10_0_ring_funcs_compute = {
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index e6b113e..d2d9dce 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1234,6 +1234,10 @@
 static const struct amdgpu_gfxoff_quirk amdgpu_gfxoff_quirk_list[] = {
 	/* https://bugzilla.kernel.org/show_bug.cgi?id=204689 */
 	{ 0x1002, 0x15dd, 0x1002, 0x15dd, 0xc8 },
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=207171 */
+	{ 0x1002, 0x15dd, 0x103c, 0x83e7, 0xd3 },
+	/* GFXOFF is unstable on C6 parts with a VBIOS 113-RAVEN-114 */
+	{ 0x1002, 0x15dd, 0x1002, 0x15dd, 0xc6 },
 	{ 0, 0, 0, 0, 0 },
 };
 
@@ -5023,10 +5027,9 @@
 	switch (adev->asic_type) {
 	case CHIP_RAVEN:
 	case CHIP_RENOIR:
-		if (!enable) {
+		if (!enable)
 			amdgpu_gfx_off_ctrl(adev, false);
-			cancel_delayed_work_sync(&adev->gfx.gfx_off_delay_work);
-		}
+
 		if (adev->pg_flags & AMD_PG_SUPPORT_RLC_SMU_HS) {
 			gfx_v9_0_enable_sck_slow_down_on_power_up(adev, true);
 			gfx_v9_0_enable_sck_slow_down_on_power_down(adev, true);
@@ -5050,12 +5053,7 @@
 			amdgpu_gfx_off_ctrl(adev, true);
 		break;
 	case CHIP_VEGA12:
-		if (!enable) {
-			amdgpu_gfx_off_ctrl(adev, false);
-			cancel_delayed_work_sync(&adev->gfx.gfx_off_delay_work);
-		} else {
-			amdgpu_gfx_off_ctrl(adev, true);
-		}
+		amdgpu_gfx_off_ctrl(adev, enable);
 		break;
 	default:
 		break;
diff --git a/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h b/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
index 074a9a0..a5b60c9 100644
--- a/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
+++ b/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
@@ -73,6 +73,22 @@
 #define SDMA_OP_AQL_COPY  0
 #define SDMA_OP_AQL_BARRIER_OR  0
 
+#define SDMA_GCR_RANGE_IS_PA		(1 << 18)
+#define SDMA_GCR_SEQ(x)			(((x) & 0x3) << 16)
+#define SDMA_GCR_GL2_WB			(1 << 15)
+#define SDMA_GCR_GL2_INV		(1 << 14)
+#define SDMA_GCR_GL2_DISCARD		(1 << 13)
+#define SDMA_GCR_GL2_RANGE(x)		(((x) & 0x3) << 11)
+#define SDMA_GCR_GL2_US			(1 << 10)
+#define SDMA_GCR_GL1_INV		(1 << 9)
+#define SDMA_GCR_GLV_INV		(1 << 8)
+#define SDMA_GCR_GLK_INV		(1 << 7)
+#define SDMA_GCR_GLK_WB			(1 << 6)
+#define SDMA_GCR_GLM_INV		(1 << 5)
+#define SDMA_GCR_GLM_WB			(1 << 4)
+#define SDMA_GCR_GL1_RANGE(x)		(((x) & 0x3) << 2)
+#define SDMA_GCR_GLI_INV(x)		(((x) & 0x3) << 0)
+
 /*define for op field*/
 #define SDMA_PKT_HEADER_op_offset 0
 #define SDMA_PKT_HEADER_op_mask   0x000000FF
diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c b/drivers/gpu/drm/amd/amdgpu/nv.c
index 033cbbc..52318b0 100644
--- a/drivers/gpu/drm/amd/amdgpu/nv.c
+++ b/drivers/gpu/drm/amd/amdgpu/nv.c
@@ -351,8 +351,6 @@
 	struct smu_context *smu = &adev->smu;
 
 	if (nv_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		ret = smu_baco_enter(smu);
 		if (ret)
 			return ret;
@@ -360,8 +358,6 @@
 		if (ret)
 			return ret;
 	} else {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		ret = nv_asic_mode1_reset(adev);
 	}
 
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
index ebfd2cd..d2840c2 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
@@ -382,6 +382,18 @@
 	unsigned vmid = AMDGPU_JOB_GET_VMID(job);
 	uint64_t csa_mc_addr = amdgpu_sdma_get_csa_mc_addr(ring, vmid);
 
+	/* Invalidate L2, because if we don't do it, we might get stale cache
+	 * lines from previous IBs.
+	 */
+	amdgpu_ring_write(ring, SDMA_PKT_HEADER_OP(SDMA_OP_GCR_REQ));
+	amdgpu_ring_write(ring, 0);
+	amdgpu_ring_write(ring, (SDMA_GCR_GL2_INV |
+				 SDMA_GCR_GL2_WB |
+				 SDMA_GCR_GLM_INV |
+				 SDMA_GCR_GLM_WB) << 16);
+	amdgpu_ring_write(ring, 0xffffff80);
+	amdgpu_ring_write(ring, 0xffff);
+
 	/* An IB packet must end on a 8 DW boundary--the next dword
 	 * must be on a 8-dword boundary. Our IB packet below is 6
 	 * dwords long, thus add x number of NOPs, such that, in
@@ -1595,7 +1607,7 @@
 		SOC15_FLUSH_GPU_TLB_NUM_WREG * 3 +
 		SOC15_FLUSH_GPU_TLB_NUM_REG_WAIT * 6 * 2 +
 		10 + 10 + 10, /* sdma_v5_0_ring_emit_fence x3 for user fence, vm fence */
-	.emit_ib_size = 7 + 6, /* sdma_v5_0_ring_emit_ib */
+	.emit_ib_size = 5 + 7 + 6, /* sdma_v5_0_ring_emit_ib */
 	.emit_ib = sdma_v5_0_ring_emit_ib,
 	.emit_fence = sdma_v5_0_ring_emit_fence,
 	.emit_pipeline_sync = sdma_v5_0_ring_emit_pipeline_sync,
diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c
index a40499d..d42a8d8 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -569,14 +569,10 @@
 
 	switch (soc15_asic_reset_method(adev)) {
 		case AMD_RESET_METHOD_BACO:
-			if (!adev->in_suspend)
-				amdgpu_inc_vram_lost(adev);
 			return soc15_asic_baco_reset(adev);
 		case AMD_RESET_METHOD_MODE2:
 			return amdgpu_dpm_mode2_reset(adev);
 		default:
-			if (!adev->in_suspend)
-				amdgpu_inc_vram_lost(adev);
 			return soc15_asic_mode1_reset(adev);
 	}
 }
diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c
index 78b3590..3ce10e0 100644
--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -765,8 +765,6 @@
 	int r;
 
 	if (vi_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		r = amdgpu_dpm_baco_reset(adev);
 	} else {
 		r = vi_asic_pci_config_reset(adev);
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index f7c5cdc..28e651b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -441,7 +441,7 @@
 
 /**
  * dm_crtc_high_irq() - Handles CRTC interrupt
- * @interrupt_params: ignored
+ * @interrupt_params: used for determining the CRTC instance
  *
  * Handles the CRTC/VSYNC interrupt by notfying DRM's VBLANK
  * event handler.
@@ -455,70 +455,6 @@
 	unsigned long flags;
 
 	acrtc = get_crtc_by_otg_inst(adev, irq_params->irq_src - IRQ_TYPE_VBLANK);
-
-	if (acrtc) {
-		acrtc_state = to_dm_crtc_state(acrtc->base.state);
-
-		DRM_DEBUG_VBL("crtc:%d, vupdate-vrr:%d\n",
-			      acrtc->crtc_id,
-			      amdgpu_dm_vrr_active(acrtc_state));
-
-		/* Core vblank handling at start of front-porch is only possible
-		 * in non-vrr mode, as only there vblank timestamping will give
-		 * valid results while done in front-porch. Otherwise defer it
-		 * to dm_vupdate_high_irq after end of front-porch.
-		 */
-		if (!amdgpu_dm_vrr_active(acrtc_state))
-			drm_crtc_handle_vblank(&acrtc->base);
-
-		/* Following stuff must happen at start of vblank, for crc
-		 * computation and below-the-range btr support in vrr mode.
-		 */
-		amdgpu_dm_crtc_handle_crc_irq(&acrtc->base);
-
-		if (acrtc_state->stream && adev->family >= AMDGPU_FAMILY_AI &&
-		    acrtc_state->vrr_params.supported &&
-		    acrtc_state->freesync_config.state == VRR_STATE_ACTIVE_VARIABLE) {
-			spin_lock_irqsave(&adev->ddev->event_lock, flags);
-			mod_freesync_handle_v_update(
-				adev->dm.freesync_module,
-				acrtc_state->stream,
-				&acrtc_state->vrr_params);
-
-			dc_stream_adjust_vmin_vmax(
-				adev->dm.dc,
-				acrtc_state->stream,
-				&acrtc_state->vrr_params.adjust);
-			spin_unlock_irqrestore(&adev->ddev->event_lock, flags);
-		}
-	}
-}
-
-#if defined(CONFIG_DRM_AMD_DC_DCN)
-/**
- * dm_dcn_crtc_high_irq() - Handles VStartup interrupt for DCN generation ASICs
- * @interrupt params - interrupt parameters
- *
- * Notify DRM's vblank event handler at VSTARTUP
- *
- * Unlike DCE hardware, we trigger the handler at VSTARTUP. at which:
- * * We are close enough to VUPDATE - the point of no return for hw
- * * We are in the fixed portion of variable front porch when vrr is enabled
- * * We are before VUPDATE, where double-buffered vrr registers are swapped
- *
- * It is therefore the correct place to signal vblank, send user flip events,
- * and update VRR.
- */
-static void dm_dcn_crtc_high_irq(void *interrupt_params)
-{
-	struct common_irq_params *irq_params = interrupt_params;
-	struct amdgpu_device *adev = irq_params->adev;
-	struct amdgpu_crtc *acrtc;
-	struct dm_crtc_state *acrtc_state;
-	unsigned long flags;
-
-	acrtc = get_crtc_by_otg_inst(adev, irq_params->irq_src - IRQ_TYPE_VBLANK);
-
 	if (!acrtc)
 		return;
 
@@ -528,22 +464,35 @@
 			 amdgpu_dm_vrr_active(acrtc_state),
 			 acrtc_state->active_planes);
 
+	/**
+	 * Core vblank handling at start of front-porch is only possible
+	 * in non-vrr mode, as only there vblank timestamping will give
+	 * valid results while done in front-porch. Otherwise defer it
+	 * to dm_vupdate_high_irq after end of front-porch.
+	 */
+	if (!amdgpu_dm_vrr_active(acrtc_state))
+		drm_crtc_handle_vblank(&acrtc->base);
+
+	/**
+	 * Following stuff must happen at start of vblank, for crc
+	 * computation and below-the-range btr support in vrr mode.
+	 */
 	amdgpu_dm_crtc_handle_crc_irq(&acrtc->base);
-	drm_crtc_handle_vblank(&acrtc->base);
+
+	/* BTR updates need to happen before VUPDATE on Vega and above. */
+	if (adev->family < AMDGPU_FAMILY_AI)
+		return;
 
 	spin_lock_irqsave(&adev->ddev->event_lock, flags);
 
-	if (acrtc_state->vrr_params.supported &&
+	if (acrtc_state->stream && acrtc_state->vrr_params.supported &&
 	    acrtc_state->freesync_config.state == VRR_STATE_ACTIVE_VARIABLE) {
-		mod_freesync_handle_v_update(
-		adev->dm.freesync_module,
-		acrtc_state->stream,
-		&acrtc_state->vrr_params);
+		mod_freesync_handle_v_update(adev->dm.freesync_module,
+					     acrtc_state->stream,
+					     &acrtc_state->vrr_params);
 
-		dc_stream_adjust_vmin_vmax(
-			adev->dm.dc,
-			acrtc_state->stream,
-			&acrtc_state->vrr_params.adjust);
+		dc_stream_adjust_vmin_vmax(adev->dm.dc, acrtc_state->stream,
+					   &acrtc_state->vrr_params.adjust);
 	}
 
 	/*
@@ -556,7 +505,8 @@
 	 * avoid race conditions between flip programming and completion,
 	 * which could cause too early flip completion events.
 	 */
-	if (acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED &&
+	if (adev->family >= AMDGPU_FAMILY_RV &&
+	    acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED &&
 	    acrtc_state->active_planes == 0) {
 		if (acrtc->event) {
 			drm_crtc_send_vblank_event(&acrtc->base, acrtc->event);
@@ -568,7 +518,6 @@
 
 	spin_unlock_irqrestore(&adev->ddev->event_lock, flags);
 }
-#endif
 
 static int dm_set_clockgating_state(void *handle,
 		  enum amd_clockgating_state state)
@@ -2008,17 +1957,22 @@
 		dc_sink_retain(aconnector->dc_sink);
 		if (sink->dc_edid.length == 0) {
 			aconnector->edid = NULL;
-			drm_dp_cec_unset_edid(&aconnector->dm_dp_aux.aux);
+			if (aconnector->dc_link->aux_mode) {
+				drm_dp_cec_unset_edid(
+					&aconnector->dm_dp_aux.aux);
+			}
 		} else {
 			aconnector->edid =
-				(struct edid *) sink->dc_edid.raw_edid;
-
+				(struct edid *)sink->dc_edid.raw_edid;
 
 			drm_connector_update_edid_property(connector,
-					aconnector->edid);
-			drm_dp_cec_set_edid(&aconnector->dm_dp_aux.aux,
-					    aconnector->edid);
+							   aconnector->edid);
+
+			if (aconnector->dc_link->aux_mode)
+				drm_dp_cec_set_edid(&aconnector->dm_dp_aux.aux,
+						    aconnector->edid);
 		}
+
 		amdgpu_dm_update_freesync_caps(connector, aconnector->edid);
 		update_connector_ext_caps(aconnector);
 	} else {
@@ -2440,8 +2394,36 @@
 		c_irq_params->adev = adev;
 		c_irq_params->irq_src = int_params.irq_source;
 
+		amdgpu_dm_irq_register_interrupt(
+			adev, &int_params, dm_crtc_high_irq, c_irq_params);
+	}
+
+	/* Use VUPDATE_NO_LOCK interrupt on DCN, which seems to correspond to
+	 * the regular VUPDATE interrupt on DCE. We want DC_IRQ_SOURCE_VUPDATEx
+	 * to trigger at end of each vblank, regardless of state of the lock,
+	 * matching DCE behaviour.
+	 */
+	for (i = DCN_1_0__SRCID__OTG0_IHC_V_UPDATE_NO_LOCK_INTERRUPT;
+	     i <= DCN_1_0__SRCID__OTG0_IHC_V_UPDATE_NO_LOCK_INTERRUPT + adev->mode_info.num_crtc - 1;
+	     i++) {
+		r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, i, &adev->vupdate_irq);
+
+		if (r) {
+			DRM_ERROR("Failed to add vupdate irq id!\n");
+			return r;
+		}
+
+		int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT;
+		int_params.irq_source =
+			dc_interrupt_to_irq_source(dc, i, 0);
+
+		c_irq_params = &adev->dm.vupdate_params[int_params.irq_source - DC_IRQ_SOURCE_VUPDATE1];
+
+		c_irq_params->adev = adev;
+		c_irq_params->irq_src = int_params.irq_source;
+
 		amdgpu_dm_irq_register_interrupt(adev, &int_params,
-				dm_dcn_crtc_high_irq, c_irq_params);
+				dm_vupdate_high_irq, c_irq_params);
 	}
 
 	/* Use GRPH_PFLIP interrupt */
@@ -3340,7 +3322,8 @@
 			  const union dc_tiling_info *tiling_info,
 			  const uint64_t info,
 			  struct dc_plane_dcc_param *dcc,
-			  struct dc_plane_address *address)
+			  struct dc_plane_address *address,
+			  bool force_disable_dcc)
 {
 	struct dc *dc = adev->dm.dc;
 	struct dc_dcc_surface_param input;
@@ -3352,6 +3335,9 @@
 	memset(&input, 0, sizeof(input));
 	memset(&output, 0, sizeof(output));
 
+	if (force_disable_dcc)
+		return 0;
+
 	if (!offset)
 		return 0;
 
@@ -3401,7 +3387,8 @@
 			     union dc_tiling_info *tiling_info,
 			     struct plane_size *plane_size,
 			     struct dc_plane_dcc_param *dcc,
-			     struct dc_plane_address *address)
+			     struct dc_plane_address *address,
+			     bool force_disable_dcc)
 {
 	const struct drm_framebuffer *fb = &afb->base;
 	int ret;
@@ -3507,7 +3494,8 @@
 
 		ret = fill_plane_dcc_attributes(adev, afb, format, rotation,
 						plane_size, tiling_info,
-						tiling_flags, dcc, address);
+						tiling_flags, dcc, address,
+						force_disable_dcc);