diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
index 6c1175c..978198f 100644
--- a/Documentation/driver-api/thermal/sysfs-api.rst
+++ b/Documentation/driver-api/thermal/sysfs-api.rst
@@ -4,8 +4,6 @@
 
 Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
 
-Updated: 2 January 2008
-
 Copyright (c)  2008 Intel Corporation
 
 
@@ -38,23 +36,23 @@
 
     ::
 
-	struct thermal_zone_device
-	*thermal_zone_device_register(char *type,
-				      int trips, int mask, void *devdata,
-				      struct thermal_zone_device_ops *ops,
-				      const struct thermal_zone_params *tzp,
-				      int passive_delay, int polling_delay))
+	struct thermal_zone_device *
+	thermal_zone_device_register_with_trips(const char *type,
+					const struct thermal_trip *trips,
+					int num_trips, void *devdata,
+					const struct thermal_zone_device_ops *ops,
+					const struct thermal_zone_params *tzp,
+					unsigned int passive_delay,
+					unsigned int polling_delay)
 
-    This interface function adds a new thermal zone device (sensor) to
+    This interface function adds a new thermal zone device (sensor) to the
     /sys/class/thermal folder as `thermal_zone[0-*]`. It tries to bind all the
-    thermal cooling devices registered at the same time.
+    thermal cooling devices registered to it at the same time.
 
     type:
 	the thermal zone type.
     trips:
-	the total number of trip points this thermal zone supports.
-    mask:
-	Bit string: If 'n'th bit is set, then trip point 'n' is writable.
+	the table of trip points for this thermal zone.
     devdata:
 	device private data
     ops:
@@ -67,32 +65,29 @@
 	.get_temp:
 		get the current temperature of the thermal zone.
 	.set_trips:
-		    set the trip points window. Whenever the current temperature
-		    is updated, the trip points immediately below and above the
-		    current temperature are found.
-	.get_mode:
-		   get the current mode (enabled/disabled) of the thermal zone.
-
-			- "enabled" means the kernel thermal management is
-			  enabled.
-			- "disabled" will prevent kernel thermal driver action
-			  upon trip points so that user applications can take
-			  charge of thermal management.
-	.set_mode:
-		set the mode (enabled/disabled) of the thermal zone.
-	.get_trip_type:
-		get the type of certain trip point.
-	.get_trip_temp:
-			get the temperature above which the certain trip point
-			will be fired.
+		set the trip points window. Whenever the current temperature
+		is updated, the trip points immediately below and above the
+		current temperature are found.
+	.change_mode:
+		change the mode (enabled/disabled) of the thermal zone.
+	.set_trip_temp:
+		set the temperature of a given trip point.
+	.get_crit_temp:
+		get the critical temperature for this thermal zone.
 	.set_emul_temp:
-			set the emulation temperature which helps in debugging
-			different threshold temperature points.
+		set the emulation temperature which helps in debugging
+		different threshold temperature points.
+	.get_trend:
+		get the trend of most recent zone temperature changes.
+	.hot:
+		hot trip point crossing handler.
+	.critical:
+		critical trip point crossing handler.
     tzp:
 	thermal zone platform parameters.
     passive_delay:
-	number of milliseconds to wait between polls when
-	performing passive cooling.
+	number of milliseconds to wait between polls when performing passive
+	cooling.
     polling_delay:
 	number of milliseconds to wait between polls when checking
 	whether trip points have been crossed (0 for interrupt driven systems).
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
index 1141368..0066149 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
@@ -278,20 +278,32 @@ static struct thermal_zone_params tzone_params = {
 
 static bool msi_irq;
 
+static void proc_thermal_free_msi(struct pci_dev *pdev, struct proc_thermal_pci *pci_info)
+{
+	int i;
+
+	for (i = 0; i < MSI_THERMAL_MAX; i++) {
+		if (proc_thermal_msi_map[i])
+			devm_free_irq(&pdev->dev, proc_thermal_msi_map[i], pci_info);
+	}
+
+	pci_free_irq_vectors(pdev);
+}
+
 static int proc_thermal_setup_msi(struct pci_dev *pdev, struct proc_thermal_pci *pci_info)
 {
-	int ret, i, irq;
+	int ret, i, irq, count;
 
-	ret = pci_alloc_irq_vectors(pdev, 1, MSI_THERMAL_MAX, PCI_IRQ_MSI | PCI_IRQ_MSIX);
-	if (ret < 0) {
+	count = pci_alloc_irq_vectors(pdev, 1, MSI_THERMAL_MAX, PCI_IRQ_MSI | PCI_IRQ_MSIX);
+	if (count < 0) {
 		dev_err(&pdev->dev, "Failed to allocate vectors!\n");
-		return ret;
+		return count;
 	}
 
 	dev_info(&pdev->dev, "msi enabled:%d msix enabled:%d\n", pdev->msi_enabled,
 		 pdev->msix_enabled);
 
-	for (i = 0; i < MSI_THERMAL_MAX; i++) {
+	for (i = 0; i < count; i++) {
 		irq =  pci_irq_vector(pdev, i);
 
 		ret = devm_request_threaded_irq(&pdev->dev, irq, proc_thermal_irq_handler,
@@ -310,7 +322,7 @@ static int proc_thermal_setup_msi(struct pci_dev *pdev, struct proc_thermal_pci
 	return 0;
 
 err_free_msi_vectors:
-	pci_free_irq_vectors(pdev);
+	proc_thermal_free_msi(pdev, pci_info);
 
 	return ret;
 }
@@ -397,7 +409,7 @@ static int proc_thermal_pci_probe(struct pci_dev *pdev, const struct pci_device_
 
 err_free_vectors:
 	if (msi_irq)
-		pci_free_irq_vectors(pdev);
+		proc_thermal_free_msi(pdev, pci_info);
 err_ret_tzone:
 	thermal_zone_device_unregister(pci_info->tzone);
 err_del_legacy:
@@ -419,6 +431,9 @@ static void proc_thermal_pci_remove(struct pci_dev *pdev)
 	proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, 0);
 	proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0);
 
+	if (msi_irq)
+		proc_thermal_free_msi(pdev, pci_info);
+
 	thermal_zone_device_unregister(pci_info->tzone);
 	proc_thermal_mmio_remove(pdev, pci_info->proc_priv);
 	if (!pci_info->no_legacy)
diff --git a/drivers/thermal/thermal_trip.c b/drivers/thermal/thermal_trip.c
index c0b679b..06a0554 100644
--- a/drivers/thermal/thermal_trip.c
+++ b/drivers/thermal/thermal_trip.c
@@ -88,10 +88,10 @@ void thermal_zone_set_trips(struct thermal_zone_device *tz)
 		return;
 
 	for_each_trip_desc(tz, td) {
-		if (td->threshold < tz->temperature && td->threshold > low)
+		if (td->threshold <= tz->temperature && td->threshold > low)
 			low = td->threshold;
 
-		if (td->threshold > tz->temperature && td->threshold < high)
+		if (td->threshold >= tz->temperature && td->threshold < high)
 			high = td->threshold;
 	}