From foo@baz Wed Jan  3 18:58:12 CET 2018
From: Hugh Dickins <hughd@google.com>
Date: Tue, 3 Oct 2017 20:49:04 -0700
Subject: kaiser: use ALTERNATIVE instead of x86_cr3_pcid_noflush

From: Hugh Dickins <hughd@google.com>


Now that we're playing the ALTERNATIVE game, use that more efficient
method: instead of user-mapping an extra page, and reading an extra
cacheline each time for x86_cr3_pcid_noflush.

Neel has found that __stringify(bts $X86_CR3_PCID_NOFLUSH_BIT, %rax)
is a working substitute for the "bts $63, %rax" in these ALTERNATIVEs;
but the one line with $63 in looks clearer, so let's stick with that.

Worried about what happens with an ALTERNATIVE between the jump and
jump label in another ALTERNATIVE?  I was, but have checked the
combinations in SWITCH_KERNEL_CR3_NO_STACK at entry_SYSCALL_64,
and it does a good job.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/entry/entry_64.S     |    7 ++++---
 arch/x86/include/asm/kaiser.h |    6 +++---
 arch/x86/mm/kaiser.c          |   11 +----------
 3 files changed, 8 insertions(+), 16 deletions(-)

--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1056,7 +1056,8 @@ ENTRY(paranoid_entry)
 	jz	2f
 	orl	$2, %ebx
 	andq	$(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax
-	orq	x86_cr3_pcid_noflush, %rax
+	/* If PCID enabled, set X86_CR3_PCID_NOFLUSH_BIT */
+	ALTERNATIVE "", "bts $63, %rax", X86_FEATURE_PCID
 	movq	%rax, %cr3
 2:
 #endif
@@ -1318,7 +1319,7 @@ ENTRY(nmi)
 	/* %rax is saved above, so OK to clobber here */
 	ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER
 	/* If PCID enabled, NOFLUSH now and NOFLUSH on return */
-	orq	x86_cr3_pcid_noflush, %rax
+	ALTERNATIVE "", "bts $63, %rax", X86_FEATURE_PCID
 	pushq	%rax
 	/* mask off "user" bit of pgd address and 12 PCID bits: */
 	andq	$(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax
@@ -1562,7 +1563,7 @@ end_repeat_nmi:
 	/* %rax is saved above, so OK to clobber here */
 	ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER
 	/* If PCID enabled, NOFLUSH now and NOFLUSH on return */
-	orq	x86_cr3_pcid_noflush, %rax
+	ALTERNATIVE "", "bts $63, %rax", X86_FEATURE_PCID
 	pushq	%rax
 	/* mask off "user" bit of pgd address and 12 PCID bits: */
 	andq	$(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax
--- a/arch/x86/include/asm/kaiser.h
+++ b/arch/x86/include/asm/kaiser.h
@@ -25,7 +25,8 @@
 .macro _SWITCH_TO_KERNEL_CR3 reg
 movq %cr3, \reg
 andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), \reg
-orq  x86_cr3_pcid_noflush, \reg
+/* If PCID enabled, set X86_CR3_PCID_NOFLUSH_BIT */
+ALTERNATIVE "", "bts $63, \reg", X86_FEATURE_PCID
 movq \reg, %cr3
 .endm
 
@@ -39,7 +40,7 @@ movq \reg, %cr3
 movq %cr3, \reg
 orq  PER_CPU_VAR(x86_cr3_pcid_user), \reg
 js   9f
-/* FLUSH this time, reset to NOFLUSH for next time (if PCID enabled) */
+/* If PCID enabled, FLUSH this time, reset to NOFLUSH for next time */
 movb \regb, PER_CPU_VAR(x86_cr3_pcid_user+7)
 9:
 movq \reg, %cr3
@@ -90,7 +91,6 @@ movq PER_CPU_VAR(unsafe_stack_register_b
 */
 DECLARE_PER_CPU_USER_MAPPED(unsigned long, unsafe_stack_register_backup);
 
-extern unsigned long x86_cr3_pcid_noflush;
 DECLARE_PER_CPU(unsigned long, x86_cr3_pcid_user);
 
 extern char __per_cpu_user_mapped_start[], __per_cpu_user_mapped_end[];
--- a/arch/x86/mm/kaiser.c
+++ b/arch/x86/mm/kaiser.c
@@ -32,7 +32,6 @@ DEFINE_PER_CPU_USER_MAPPED(unsigned long
  * This is also handy because systems that do not support PCIDs
  * just end up or'ing a 0 into their CR3, which does no harm.
  */
-unsigned long x86_cr3_pcid_noflush __read_mostly;
 DEFINE_PER_CPU(unsigned long, x86_cr3_pcid_user);
 
 /*
@@ -357,10 +356,6 @@ void __init kaiser_init(void)
 	kaiser_add_user_map_early(&debug_idt_table,
 				  sizeof(gate_desc) * NR_VECTORS,
 				  __PAGE_KERNEL);
-
-	kaiser_add_user_map_early(&x86_cr3_pcid_noflush,
-				  sizeof(x86_cr3_pcid_noflush),
-				  __PAGE_KERNEL);
 }
 
 /* Add a mapping to the shadow mapping, and synchronize the mappings */
@@ -434,18 +429,14 @@ pgd_t kaiser_set_shadow_pgd(pgd_t *pgdp,
 
 void kaiser_setup_pcid(void)
 {
-	unsigned long kern_cr3 = 0;
 	unsigned long user_cr3 = KAISER_SHADOW_PGD_OFFSET;
 
-	if (this_cpu_has(X86_FEATURE_PCID)) {
-		kern_cr3 |= X86_CR3_PCID_KERN_NOFLUSH;
+	if (this_cpu_has(X86_FEATURE_PCID))
 		user_cr3 |= X86_CR3_PCID_USER_NOFLUSH;
-	}
 	/*
 	 * These variables are used by the entry/exit
 	 * code to change PCID and pgd and TLB flushing.
 	 */
-	x86_cr3_pcid_noflush = kern_cr3;
 	this_cpu_write(x86_cr3_pcid_user, user_cr3);
 }