diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index a4a38fc..44b7057 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -10,12 +10,13 @@
 Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
+	- gpios: OF device-tree gpio specification.
+	- interrupts: the interrupt line for that input.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
 
-Required mutual exclusive subnode-properties:
-	- gpios: OF device-tree gpio specification.
-	- interrupts: the interrupt line for that input
+Note that either "interrupts" or "gpios" properties can be omitted, but not
+both at the same time. Specifying both properties is allowed.
 
 Optional subnode-properties:
 	- linux,input-type: Specify event type this button/key generates.
@@ -23,6 +24,9 @@
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- linux,can-disable: Boolean, indicates that button is connected
+	  to dedicated (not shared) interrupt which can be disabled to
+	  suppress events from the button.
 
 Example nodes:
 
diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
index 1b97222..12bb771 100644
--- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt
+++ b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
@@ -8,6 +8,8 @@
  - debounce-interval        : Debouncing interval time in milliseconds
  - st,scan-count            : Scanning cycles elapsed before key data is updated
  - st,no-autorepeat         : If specified device will not autorepeat
+ - keypad,num-rows          : See ./matrix-keymap.txt
+ - keypad,num-columns       : See ./matrix-keymap.txt
 
 Example:
 
diff --git a/Makefile b/Makefile
index ef748e1..eb4eca5 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Diseased Newt
 
 # *DOCUMENTATION*
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 1466580..70b1943 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -203,27 +203,3 @@
 		compatible = "linux,spdif-dir";
 	};
 };
-
-&pinctrl {
-	/*
-	 * These pins might be muxed as I2S by
-	 * the bootloader, but it conflicts
-	 * with the real I2S pins that are
-	 * muxed using i2s_pins. We must mux
-	 * those pins to a function other than
-	 * I2S.
-	 */
-	pinctrl-0 = <&hog_pins1 &hog_pins2>;
-	pinctrl-names = "default";
-
-	hog_pins1: hog-pins1 {
-		marvell,pins = "mpp6",  "mpp8", "mpp10",
-			       "mpp12", "mpp13";
-		marvell,function = "gpio";
-	};
-
-	hog_pins2: hog-pins2 {
-		marvell,pins = "mpp5", "mpp7", "mpp9";
-		marvell,function = "gpo";
-	};
-};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2328fe7..bc393b7 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -338,6 +338,7 @@
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index f9c8639..715ae19 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1046,6 +1046,15 @@
 		seq_printf(m, "model name\t: %s rev %d (%s)\n",
 			   cpu_name, cpuid & 15, elf_platform);
 
+#if defined(CONFIG_SMP)
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
+			   (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
+#else
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   loops_per_jiffy / (500000/HZ),
+			   (loops_per_jiffy / (5000/HZ)) % 100);
+#endif
 		/* dump out the processor features */
 		seq_puts(m, "Features\t: ");
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 5e6052e..86ef244 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -387,6 +387,18 @@
 
 void __init smp_cpus_done(unsigned int max_cpus)
 {
+	int cpu;
+	unsigned long bogosum = 0;
+
+	for_each_online_cpu(cpu)
+		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+
+	printk(KERN_INFO "SMP: Total of %d processors activated "
+	       "(%lu.%02lu BogoMIPS).\n",
+	       num_online_cpus(),
+	       bogosum / (500000/HZ),
+	       (bogosum / (5000/HZ)) % 100);
+
 	hyp_mode_check();
 }
 
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index f3b51b5..95c39b9 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			318 /* length of syscall table */
+#define NR_syscalls			319 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h
index 4c2240c..4610795 100644
--- a/arch/ia64/include/uapi/asm/unistd.h
+++ b/arch/ia64/include/uapi/asm/unistd.h
@@ -331,5 +331,6 @@
 #define __NR_getrandom			1339
 #define __NR_memfd_create		1340
 #define __NR_bpf			1341
+#define __NR_execveat			1342
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index f5e96df..fcf8b8c 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1779,6 +1779,7 @@
 	data8 sys_getrandom
 	data8 sys_memfd_create			// 1340
 	data8 sys_bpf
+	data8 sys_execveat
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/nios2/kernel/cpuinfo.c b/arch/nios2/kernel/cpuinfo.c
index 51d5bb9..a223691d 100644
--- a/arch/nios2/kernel/cpuinfo.c
+++ b/arch/nios2/kernel/cpuinfo.c
@@ -72,6 +72,7 @@
 	cpuinfo.has_div = fcpu_has(cpu, "altr,has-div");
 	cpuinfo.has_mul = fcpu_has(cpu, "altr,has-mul");
 	cpuinfo.has_mulx = fcpu_has(cpu, "altr,has-mulx");
+	cpuinfo.mmu = fcpu_has(cpu, "altr,has-mmu");
 
 	if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div)
 		err_cpu("DIV");
diff --git a/arch/nios2/kernel/entry.S b/arch/nios2/kernel/entry.S
index 83bca17..0bdfd13 100644
--- a/arch/nios2/kernel/entry.S
+++ b/arch/nios2/kernel/entry.S
@@ -365,30 +365,14 @@
 	GET_THREAD_INFO	r1
 	ldw	r4, TI_PREEMPT_COUNT(r1)
 	bne	r4, r0, restore_all
-
-need_resched:
 	ldw	r4, TI_FLAGS(r1)		/* ? Need resched set */
 	BTBZ	r10, r4, TIF_NEED_RESCHED, restore_all
 	ldw	r4, PT_ESTATUS(sp)	/* ? Interrupts off */
 	andi	r10, r4, ESTATUS_EPIE
 	beq	r10, r0, restore_all
-	movia	r4, PREEMPT_ACTIVE
-	stw	r4, TI_PREEMPT_COUNT(r1)
-	rdctl	r10, status		/* enable intrs again */
-	ori	r10, r10 ,STATUS_PIE
-	wrctl	status, r10
-	PUSH	r1
-	call	schedule
-	POP	r1
-	mov	r4, r0
-	stw	r4, TI_PREEMPT_COUNT(r1)
-	rdctl	r10, status		/* disable intrs */
-	andi	r10, r10, %lo(~STATUS_PIE)
-	wrctl	status, r10
-	br	need_resched
-#else
-	br	restore_all
+	call	preempt_schedule_irq
 #endif
+	br	restore_all
 
 /***********************************************************************
  * A few syscall wrappers
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 19c36cb..a46f5f4 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -86,6 +86,11 @@
 extern void reserve_crashkernel(void);
 extern void machine_kexec_mask_interrupts(void);
 
+static inline bool kdump_in_progress(void)
+{
+	return crashing_cpu >= 0;
+}
+
 #else /* !CONFIG_KEXEC */
 static inline void crash_kexec_secondary(struct pt_regs *regs) { }
 
@@ -106,6 +111,11 @@
 	return 0;
 }
 
+static inline bool kdump_in_progress(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_KEXEC */
 #endif /* ! __ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index ce9577d..91062ee 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -366,3 +366,4 @@
 SYSCALL_SPU(getrandom)
 SYSCALL_SPU(memfd_create)
 SYSCALL_SPU(bpf)
+COMPAT_SYS(execveat)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index e0da021..36b79c3 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		362
+#define __NR_syscalls		363
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls
diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h
index f55351f..ef5b5b1 100644
--- a/arch/powerpc/include/uapi/asm/unistd.h
+++ b/arch/powerpc/include/uapi/asm/unistd.h
@@ -384,5 +384,6 @@
 #define __NR_getrandom		359
 #define __NR_memfd_create	360
 #define __NR_bpf		361
+#define __NR_execveat		362
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 879b3aa..f96d1ec 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -330,7 +330,7 @@
         * using debugger IPI.
         */
 
-	if (crashing_cpu == -1)
+	if (!kdump_in_progress())
 		kexec_prepare_cpus();
 
 	pr_debug("kexec: Starting switchover sequence.\n");
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 8ec017c..8b2d2dc 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -700,6 +700,7 @@
 	smp_store_cpu_info(cpu);
 	set_dec(tb_ticks_per_jiffy);
 	preempt_disable();
+	cpu_callin_map[cpu] = 1;
 
 	if (smp_ops->setup_cpu)
 		smp_ops->setup_cpu(cpu);
@@ -738,14 +739,6 @@
 	notify_cpu_starting(cpu);
 	set_cpu_online(cpu, true);
 
-	/*
-	 * CPU must be marked active and online before we signal back to the
-	 * master, because the scheduler needs to see the cpu_online and
-	 * cpu_active bits set.
-	 */
-	smp_wmb();
-	cpu_callin_map[cpu] = 1;
-
 	local_irq_enable();
 
 	cpu_startup_entry(CPUHP_ONLINE);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 469751d..b5682fd 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -43,6 +43,7 @@
 #include <asm/trace.h>
 #include <asm/firmware.h>
 #include <asm/plpar_wrappers.h>
+#include <asm/kexec.h>
 #include <asm/fadump.h>
 
 #include "pseries.h"
@@ -267,8 +268,13 @@
 		 * out to the user, but at least this will stop us from
 		 * continuing on further and creating an even more
 		 * difficult to debug situation.
+		 *
+		 * There is a known problem when kdump'ing, if cpus are offline
+		 * the above call will fail. Rather than panicking again, keep
+		 * going and hope the kdump kernel is also little endian, which
+		 * it usually is.
 		 */
-		if (rc)
+		if (rc && !kdump_in_progress())
 			panic("Could not enable big endian exceptions");
 	}
 #endif
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 87bc868..d195a87 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -3,6 +3,7 @@
 	default y
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_UID16
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select GENERIC_IO
diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c
index 531d426..bd16d6c 100644
--- a/arch/x86/um/sys_call_table_32.c
+++ b/arch/x86/um/sys_call_table_32.c
@@ -34,7 +34,7 @@
 
 extern asmlinkage void sys_ni_syscall(void);
 
-const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
+const sys_call_ptr_t sys_call_table[] ____cacheline_aligned = {
 	/*
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
diff --git a/arch/x86/um/sys_call_table_64.c b/arch/x86/um/sys_call_table_64.c
index 20c3649..5cdfa9d 100644
--- a/arch/x86/um/sys_call_table_64.c
+++ b/arch/x86/um/sys_call_table_64.c
@@ -47,7 +47,7 @@
 
 extern void sys_ni_syscall(void);
 
-const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
+const sys_call_ptr_t sys_call_table[] ____cacheline_aligned = {
 	/*
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
diff --git a/crypto/af_alg.c b/crypto/af_alg.c
index 1fa7bc3..4665b79 100644
--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -455,6 +455,9 @@
 {
 	struct af_alg_completion *completion = req->data;
 
+	if (err == -EINPROGRESS)
+		return;
+
 	completion->err = err;
 	complete(&completion->completion);
 }
diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index fd5a5e8..982b963 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -969,7 +969,8 @@
 
 		do_gettimeofday(&t);
 		pr_info("**Enqueue %02x %02x: %ld.%6.6ld\n",
-		       msg->data[0], msg->data[1], t.tv_sec, t.tv_usec);
+		       msg->data[0], msg->data[1],
+		       (long) t.tv_sec, (long) t.tv_usec);
 	}
 }
 
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 6a79fc4..095c177 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -462,7 +462,7 @@
 
 	/* Register the CP15 based counter if we have one */
 	if (type & ARCH_CP15_TIMER) {
-		if (arch_timer_use_virtual)
+		if (IS_ENABLED(CONFIG_ARM64) || arch_timer_use_virtual)
 			arch_timer_read_counter = arch_counter_get_cntvct;
 		else
 			arch_timer_read_counter = arch_counter_get_cntpct;
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 8afa28e..18d4b2c 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -28,6 +28,13 @@
 #include <linux/cdev.h>
 #include "input-compat.h"
 
+enum evdev_clock_type {
+	EV_CLK_REAL = 0,
+	EV_CLK_MONO,
+	EV_CLK_BOOT,
+	EV_CLK_MAX
+};
+
 struct evdev {
 	int open;
 	struct input_handle handle;
@@ -49,12 +56,32 @@
 	struct fasync_struct *fasync;
 	struct evdev *evdev;
 	struct list_head node;
-	int clkid;
+	int clk_type;
 	bool revoked;
 	unsigned int bufsize;
 	struct input_event buffer[];
 };
 
+static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
+{
+	switch (clkid) {
+
+	case CLOCK_REALTIME:
+		client->clk_type = EV_CLK_REAL;
+		break;
+	case CLOCK_MONOTONIC:
+		client->clk_type = EV_CLK_MONO;
+		break;
+	case CLOCK_BOOTTIME:
+		client->clk_type = EV_CLK_BOOT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* flush queued events of type @type, caller must hold client->buffer_lock */
 static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
 {
@@ -108,8 +135,11 @@
 	struct input_event ev;
 	ktime_t time;
 
-	time = (client->clkid == CLOCK_MONOTONIC) ?
-		ktime_get() : ktime_get_real();
+	time = client->clk_type == EV_CLK_REAL ?
+			ktime_get_real() :
+			client->clk_type == EV_CLK_MONO ?
+				ktime_get() :
+				ktime_get_boottime();
 
 	ev.time = ktime_to_timeval(time);
 	ev.type = EV_SYN;
@@ -159,7 +189,7 @@
 
 static void evdev_pass_values(struct evdev_client *client,
 			const struct input_value *vals, unsigned int count,
-			ktime_t mono, ktime_t real)
+			ktime_t *ev_time)
 {
 	struct evdev *evdev = client->evdev;
 	const struct input_value *v;
@@ -169,8 +199,7 @@
 	if (client->revoked)
 		return;
 
-	event.time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ?
-				      mono : real);
+	event.time = ktime_to_timeval(ev_time[client->clk_type]);
 
 	/* Interrupts are disabled, just acquire the lock. */
 	spin_lock(&client->buffer_lock);
@@ -198,21 +227,22 @@
 {
 	struct evdev *evdev = handle->private;
 	struct evdev_client *client;
-	ktime_t time_mono, time_real;
+	ktime_t ev_time[EV_CLK_MAX];
 
-	time_mono = ktime_get();
-	time_real = ktime_mono_to_real(time_mono);
+	ev_time[EV_CLK_MONO] = ktime_get();
+	ev_time[EV_CLK_REAL] = ktime_mono_to_real(ev_time[EV_CLK_MONO]);
+	ev_time[EV_CLK_BOOT] = ktime_mono_to_any(ev_time[EV_CLK_MONO],
+						 TK_OFFS_BOOT);
 
 	rcu_read_lock();
 
 	client = rcu_dereference(evdev->grab);
 
 	if (client)
-		evdev_pass_values(client, vals, count, time_mono, time_real);
+		evdev_pass_values(client, vals, count, ev_time);
 	else
 		list_for_each_entry_rcu(client, &evdev->client_list, node)
-			evdev_pass_values(client, vals, count,
-					  time_mono, time_real);
+			evdev_pass_values(client, vals, count, ev_time);
 
 	rcu_read_unlock();
 }
@@ -877,10 +907,8 @@
 	case EVIOCSCLOCKID:
 		if (copy_from_user(&i, p, sizeof(unsigned int)))
 			return -EFAULT;
-		if (i != CLOCK_MONOTONIC && i != CLOCK_REALTIME)
-			return -EINVAL;
-		client->clkid = i;
-		return 0;
+
+		return evdev_set_clk_type(client, i);
 
 	case EVIOCGKEYCODE:
 		return evdev_handle_get_keycode(dev, p);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 04217c2..213e3a1 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1974,18 +1974,22 @@
 
 	events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */
 
-	for (i = 0; i < ABS_CNT; i++) {
-		if (test_bit(i, dev->absbit)) {
-			if (input_is_mt_axis(i))
-				events += mt_slots;
-			else
-				events++;
+	if (test_bit(EV_ABS, dev->evbit)) {
+		for (i = 0; i < ABS_CNT; i++) {
+			if (test_bit(i, dev->absbit)) {
+				if (input_is_mt_axis(i))
+					events += mt_slots;
+				else
+					events++;
+			}
 		}
 	}
 
-	for (i = 0; i < REL_CNT; i++)
-		if (test_bit(i, dev->relbit))
-			events++;
+	if (test_bit(EV_REL, dev->evbit)) {
+		for (i = 0; i < REL_CNT; i++)
+			if (test_bit(i, dev->relbit))
+				events++;
+	}
 
 	/* Make room for KEY and MSC events */
 	events += 7;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 96ee26c..a5d9b3f 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -559,6 +559,7 @@
 config KEYBOARD_STMPE
 	tristate "STMPE keypad support"
 	depends on MFD_STMPE
+	depends on OF
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad controller on STMPE I/O
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index d4dd78a..883d6ae 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -35,9 +35,13 @@
 struct gpio_button_data {
 	const struct gpio_keys_button *button;
 	struct input_dev *input;
-	struct timer_list timer;
-	struct work_struct work;
-	unsigned int timer_debounce;	/* in msecs */
+
+	struct timer_list release_timer;
+	unsigned int release_delay;	/* in msecs, for IRQ-only buttons */
+
+	struct delayed_work work;
+	unsigned int software_debounce;	/* in msecs, for GPIO-driven buttons */
+
 	unsigned int irq;
 	spinlock_t lock;
 	bool disabled;
@@ -116,11 +120,14 @@
 {
 	if (!bdata->disabled) {
 		/*
-		 * Disable IRQ and possible debouncing timer.
+		 * Disable IRQ and associated timer/work structure.
 		 */
 		disable_irq(bdata->irq);
-		if (bdata->timer_debounce)
-			del_timer_sync(&bdata->timer);
+
+		if (gpio_is_valid(bdata->button->gpio))
+			cancel_delayed_work_sync(&bdata->work);
+		else
+			del_timer_sync(&bdata->release_timer);
 
 		bdata->disabled = true;
 	}
@@ -343,7 +350,7 @@
 static void gpio_keys_gpio_work_func(struct work_struct *work)
 {
 	struct gpio_button_data *bdata =
-		container_of(work, struct gpio_button_data, work);
+		container_of(work, struct gpio_button_data, work.work);
 
 	gpio_keys_gpio_report_event(bdata);
 
@@ -351,13 +358,6 @@
 		pm_relax(bdata->input->dev.parent);
 }
 
-static void gpio_keys_gpio_timer(unsigned long _data)
-{
-	struct gpio_button_data *bdata = (struct gpio_button_data *)_data;
-
-	schedule_work(&bdata->work);
-}
-
 static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
 {
 	struct gpio_button_data *bdata = dev_id;
@@ -366,11 +366,10 @@
 
 	if (bdata->button->wakeup)
 		pm_stay_awake(bdata->input->dev.parent);
-	if (bdata->timer_debounce)
-		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(bdata->timer_debounce));
-	else
-		schedule_work(&bdata->work);
+
+	mod_delayed_work(system_wq,
+			 &bdata->work,
+			 msecs_to_jiffies(bdata->software_debounce));
 
 	return IRQ_HANDLED;
 }
@@ -408,7 +407,7 @@
 		input_event(input, EV_KEY, button->code, 1);
 		input_sync(input);
 
-		if (!bdata->timer_debounce) {
+		if (!bdata->release_delay) {
 			input_event(input, EV_KEY, button->code, 0);
 			input_sync(input);
 			goto out;
@@ -417,9 +416,9 @@
 		bdata->key_pressed = true;
 	}
 
-	if (bdata->timer_debounce)
-		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(bdata->timer_debounce));
+	if (bdata->release_delay)
+		mod_timer(&bdata->release_timer,
+			jiffies + msecs_to_jiffies(bdata->release_delay));
 out:
 	spin_unlock_irqrestore(&bdata->lock, flags);
 	return IRQ_HANDLED;
@@ -429,10 +428,10 @@
 {
 	struct gpio_button_data *bdata = data;
 
-	if (bdata->timer_debounce)
-		del_timer_sync(&bdata->timer);
-
-	cancel_work_sync(&bdata->work);
+	if (gpio_is_valid(bdata->button->gpio))
+		cancel_delayed_work_sync(&bdata->work);
+	else
+		del_timer_sync(&bdata->release_timer);
 }
 
 static int gpio_keys_setup_key(struct platform_device *pdev,
@@ -466,23 +465,25 @@
 					button->debounce_interval * 1000);
 			/* use timer if gpiolib doesn't provide debounce */
 			if (error < 0)
-				bdata->timer_debounce =
+				bdata->software_debounce =
 						button->debounce_interval;
 		}
 
-		irq = gpio_to_irq(button->gpio);
-		if (irq < 0) {
-			error = irq;
-			dev_err(dev,
-				"Unable to get irq number for GPIO %d, error %d\n",
-				button->gpio, error);
-			return error;
+		if (button->irq) {
+			bdata->irq = button->irq;
+		} else {
+			irq = gpio_to_irq(button->gpio);
+			if (irq < 0) {
+				error = irq;
+				dev_err(dev,
+					"Unable to get irq number for GPIO %d, error %d\n",
+					button->gpio, error);
+				return error;
+			}
+			bdata->irq = irq;
 		}
-		bdata->irq = irq;
 
-		INIT_WORK(&bdata->work, gpio_keys_gpio_work_func);
-		setup_timer(&bdata->timer,
-			    gpio_keys_gpio_timer, (unsigned long)bdata);
+		INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
 
 		isr = gpio_keys_gpio_isr;
 		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
@@ -499,8 +500,8 @@
 			return -EINVAL;
 		}
 
-		bdata->timer_debounce = button->debounce_interval;
-		setup_timer(&bdata->timer,
+		bdata->release_delay = button->debounce_interval;
+		setup_timer(&bdata->release_timer,
 			    gpio_keys_irq_timer, (unsigned long)bdata);
 
 		isr = gpio_keys_irq_isr;
@@ -510,7 +511,7 @@
 	input_set_capability(input, button->type ?: EV_KEY, button->code);
 
 	/*
-	 * Install custom action to cancel debounce timer and
+	 * Install custom action to cancel release timer and
 	 * workqueue item.
 	 */
 	error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata);
@@ -618,33 +619,30 @@
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
-		int gpio = -1;
 		enum of_gpio_flags flags;
 
 		button = &pdata->buttons[i++];
 
-		if (!of_find_property(pp, "gpios", NULL)) {
-			button->irq = irq_of_parse_and_map(pp, 0);
-			if (button->irq == 0) {
-				i--;
-				pdata->nbuttons--;
-				dev_warn(dev, "Found button without gpios or irqs\n");
-				continue;
-			}
-		} else {
-			gpio = of_get_gpio_flags(pp, 0, &flags);
-			if (gpio < 0) {
-				error = gpio;
+		button->gpio = of_get_gpio_flags(pp, 0, &flags);
+		if (button->gpio < 0) {
+			error = button->gpio;
+			if (error != -ENOENT) {
 				if (error != -EPROBE_DEFER)
 					dev_err(dev,
 						"Failed to get gpio flags, error: %d\n",
 						error);
 				return ERR_PTR(error);
 			}
+		} else {
+			button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 		}
 
-		button->gpio = gpio;
-		button->active_low = flags & OF_GPIO_ACTIVE_LOW;
+		button->irq = irq_of_parse_and_map(pp, 0);
+
+		if (!gpio_is_valid(button->gpio) && !button->irq) {
+			dev_err(dev, "Found button without gpios or irqs\n");
+			return ERR_PTR(-EINVAL);
+		}
 
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
 			dev_err(dev, "Button without keycode: 0x%x\n",
@@ -659,6 +657,8 @@
 
 		button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
 
+		button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);
+
 		if (of_property_read_u32(pp, "debounce-interval",
 					 &button->debounce_interval))
 			button->debounce_interval = 5;
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index 610a8af..5b152f2 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -473,7 +473,7 @@
 	if (error)
 		goto bail1;
 
-	init_completion(&dev->cmd_done);
+	reinit_completion(&dev->cmd_done);
 	serio_write(serio, 0);
 	serio_write(serio, 0);
 	serio_write(serio, HIL_PKT_CMD >> 8);
@@ -482,7 +482,7 @@
 	if (error)
 		goto bail1;
 
-	init_completion(&dev->cmd_done);
+	reinit_completion(&dev->cmd_done);
 	serio_write(serio, 0);
 	serio_write(serio, 0);
 	serio_write(serio, HIL_PKT_CMD >> 8);
@@ -491,7 +491,7 @@
 	if (error)
 		goto bail1;
 
-	init_completion(&dev->cmd_done);
+	reinit_completion(&dev->cmd_done);
 	serio_write(serio, 0);
 	serio_write(serio, 0);
 	serio_write(serio, HIL_PKT_CMD >> 8);
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index ef5e67f..fe6e3f2 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -45,13 +45,14 @@
 #define STMPE_KEYPAD_MAX_ROWS		8
 #define STMPE_KEYPAD_MAX_COLS		8
 #define STMPE_KEYPAD_ROW_SHIFT		3
-#define STMPE_KEYPAD_KEYMAP_SIZE	\
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
 	(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
 
 /**
  * struct stmpe_keypad_variant - model-specific attributes
  * @auto_increment: whether the KPC_DATA_BYTE register address
  *		    auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
  * @num_data: number of data bytes
  * @num_normal_data: number of normal keys' data bytes
  * @max_cols: maximum number of columns supported
@@ -61,6 +62,7 @@
  */
 struct stmpe_keypad_variant {
 	bool		auto_increment;
+	bool		set_pullup;
 	int		num_data;
 	int		num_normal_data;
 	int		max_cols;
@@ -81,6 +83,7 @@
 	},
 	[STMPE2401] = {
 		.auto_increment		= false,
+		.set_pullup		= true,
 		.num_data		= 3,
 		.num_normal_data	= 2,
 		.max_cols		= 8,
@@ -90,6 +93,7 @@
 	},
 	[STMPE2403] = {
 		.auto_increment		= true,
+		.set_pullup		= true,
 		.num_data		= 5,
 		.num_normal_data	= 3,
 		.max_cols		= 8,
@@ -99,16 +103,30 @@
 	},
 };
 
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms.  Maximum is
+ *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
 struct stmpe_keypad {
 	struct stmpe *stmpe;
 	struct input_dev *input;
 	const struct stmpe_keypad_variant *variant;
-	const struct stmpe_keypad_platform_data *plat;
-
+	unsigned int debounce_ms;
+	unsigned int scan_count;
+	bool no_autorepeat;
 	unsigned int rows;
 	unsigned int cols;
-
-	unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+	unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
 };
 
 static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
@@ -171,7 +189,10 @@
 	unsigned int col_gpios = variant->col_gpios;
 	unsigned int row_gpios = variant->row_gpios;
 	struct stmpe *stmpe = keypad->stmpe;
+	u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
 	unsigned int pins = 0;
+	unsigned int pu_pins = 0;
+	int ret;
 	int i;
 
 	/*
@@ -188,8 +209,10 @@
 	for (i = 0; i < variant->max_cols; i++) {
 		int num = __ffs(col_gpios);
 
-		if (keypad->cols & (1 << i))
+		if (keypad->cols & (1 << i)) {
 			pins |= 1 << num;
+			pu_pins |= 1 << num;
+		}
 
 		col_gpios &= ~(1 << num);
 	}
@@ -203,20 +226,43 @@
 		row_gpios &= ~(1 << num);
 	}
 
-	return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	if (ret)
+		return ret;
+
+	/*
+	 * On STMPE24xx, set pin bias to pull-up on all keypad input
+	 * pins (columns), this incidentally happen to be maximum 8 pins
+	 * and placed at GPIO0-7 so only the LSB of the pull up register
+	 * ever needs to be written.
+	 */
+	if (variant->set_pullup) {
+		u8 val;
+
+		ret = stmpe_reg_read(stmpe, pureg);
+		if (ret)
+			return ret;
+
+		/* Do not touch unused pins, may be used for GPIO */
+		val = ret & ~pu_pins;
+		val |= pu_pins;
+
+		ret = stmpe_reg_write(stmpe, pureg, val);
+	}
+
+	return 0;
 }
 
 static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
 {
-	const struct stmpe_keypad_platform_data *plat = keypad->plat;
 	const struct stmpe_keypad_variant *variant = keypad->variant;
 	struct stmpe *stmpe = keypad->stmpe;
 	int ret;
 
-	if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+	if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
 		return -EINVAL;
 
-	if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+	if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
 		return -EINVAL;
 
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
@@ -245,7 +291,7 @@
 
 	ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
 			     STMPE_KPC_CTRL_MSB_SCAN_COUNT,
-			     plat->scan_count << 4);
+			     keypad->scan_count << 4);
 	if (ret < 0)
 		return ret;
 
@@ -253,17 +299,18 @@
 			      STMPE_KPC_CTRL_LSB_SCAN |
 			      STMPE_KPC_CTRL_LSB_DEBOUNCE,
 			      STMPE_KPC_CTRL_LSB_SCAN |
-			      (plat->debounce_ms << 1));
+			      (keypad->debounce_ms << 1));
 }
 
-static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+					u32 used_rows, u32 used_cols)
 {
 	int row, col;
 
-	for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) {
-		for (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) {
+	for (row = 0; row < used_rows; row++) {
+		for (col = 0; col < used_cols; col++) {
 			int code = MATRIX_SCAN_CODE(row, col,
-						STMPE_KEYPAD_ROW_SHIFT);
+						    STMPE_KEYPAD_ROW_SHIFT);
 			if (keypad->keymap[code] != KEY_RESERVED) {
 				keypad->rows |= 1 << row;
 				keypad->cols |= 1 << col;
@@ -272,51 +319,17 @@
 	}
 }
 
-#ifdef CONFIG_OF
-static const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
-	struct device_node *np = dev->of_node;
-	struct stmpe_keypad_platform_data *plat;
-
-	if (!np)
-		return ERR_PTR(-ENODEV);
-
-	plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
-	if (!plat)
-		return ERR_PTR(-ENOMEM);
-
-	of_property_read_u32(np, "debounce-interval", &plat->debounce_ms);
-	of_property_read_u32(np, "st,scan-count", &plat->scan_count);
-
-	plat->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
-
-	return plat;
-}
-#else
-static inline const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
-	return ERR_PTR(-EINVAL);
-}
-#endif
-
 static int stmpe_keypad_probe(struct platform_device *pdev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
-	const struct stmpe_keypad_platform_data *plat;
+	struct device_node *np = pdev->dev.of_node;
 	struct stmpe_keypad *keypad;
 	struct input_dev *input;
+	u32 rows;
+	u32 cols;
 	int error;
 	int irq;
 
-	plat = stmpe->pdata->keypad;
-	if (!plat) {
-		plat = stmpe_keypad_of_probe(&pdev->dev);
-		if (IS_ERR(plat))
-			return PTR_ERR(plat);
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
@@ -326,6 +339,13 @@
 	if (!keypad)
 		return -ENOMEM;
 
+	keypad->stmpe = stmpe;
+	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+	of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+	of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+	keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
 	input = devm_input_allocate_device(&pdev->dev);
 	if (!input)
 		return -ENOMEM;
@@ -334,23 +354,22 @@
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &pdev->dev;
 
-	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
-					   STMPE_KEYPAD_MAX_ROWS,
-					   STMPE_KEYPAD_MAX_COLS,
+	error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
 					   keypad->keymap, input);
 	if (error)
 		return error;
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
-	if (!plat->no_autorepeat)
+	if (!keypad->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	stmpe_keypad_fill_used_pins(keypad);
+	stmpe_keypad_fill_used_pins(keypad, rows, cols);
 
-	keypad->stmpe = stmpe;
-	keypad->plat = plat;
 	keypad->input = input;
-	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
 
 	error = stmpe_keypad_chip_init(keypad);
 	if (error < 0)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index d125a01..d88d73d 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -881,6 +881,34 @@
 					  unsigned char *pkt,
 					  unsigned char pkt_id)
 {
+	/*
+	 *       packet-fmt    b7   b6    b5   b4   b3   b2   b1   b0
+	 * Byte0 TWO & MULTI    L    1     R    M    1 Y0-2 Y0-1 Y0-0
+	 * Byte0 NEW            L    1  X1-5    1    1 Y0-2 Y0-1 Y0-0
+	 * Byte1            Y0-10 Y0-9  Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
+	 * Byte2            X0-11    1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
+	 * Byte3            X1-11    1  X0-4 X0-3    1 X0-2 X0-1 X0-0
+	 * Byte4 TWO        X1-10  TWO  X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
+	 * Byte4 MULTI      X1-10  TWO  X1-9 X1-8 X1-7 X1-6 Y1-5    1
+	 * Byte4 NEW        X1-10  TWO  X1-9 X1-8 X1-7 X1-6    0    0
+	 * Byte5 TWO & NEW  Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
+	 * Byte5 MULTI      Y1-10    0  Y1-9 Y1-8 Y1-7 Y1-6  F-1  F-0
+	 * L:         Left button
+	 * R / M:     Non-clickpads: Right / Middle button
+	 *            Clickpads: When > 2 fingers are down, and some fingers
+	 *            are in the button area, then the 2 coordinates reported
+	 *            are for fingers outside the button area and these report
+	 *            extra fingers being present in the right / left button
+	 *            area. Note these fingers are not added to the F field!
+	 *            so if a TWO packet is received and R = 1 then there are
+	 *            3 fingers down, etc.
+	 * TWO:       1: Two touches present, byte 0/4/5 are in TWO fmt
+	 *            0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+	 *               otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+	 *               in NEW fmt
+	 * F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
+	 */
+
 	mt[0].x = ((pkt[2] & 0x80) << 4);
 	mt[0].x |= ((pkt[2] & 0x3F) << 5);
 	mt[0].x |= ((pkt[3] & 0x30) >> 1);
@@ -919,18 +947,21 @@
 
 static int alps_get_mt_count(struct input_mt_pos *mt)
 {
-	int i;
+	int i, fingers = 0;
 
-	for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++)
-		/* empty */;
+	for (i = 0; i < MAX_TOUCHES; i++) {
+		if (mt[i].x != 0 || mt[i].y != 0)
+			fingers++;
+	}
 
-	return i;
+	return fingers;
 }
 
 static int alps_decode_packet_v7(struct alps_fields *f,
 				  unsigned char *p,
 				  struct psmouse *psmouse)
 {
+	struct alps_data *priv = psmouse->private;
 	unsigned char pkt_id;
 
 	pkt_id = alps_get_packet_id_v7(p);
@@ -938,19 +969,52 @@
 		return 0;
 	if (pkt_id == V7_PACKET_ID_UNKNOWN)
 		return -1;
+	/*
+	 * NEW packets are send to indicate a discontinuity in the finger
+	 * coordinate reporting. Specifically a finger may have moved from
+	 * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for
+	 * us.
+	 *
+	 * NEW packets have 3 problems:
+	 * 1) They do not contain middle / right button info (on non clickpads)
+	 *    this can be worked around by preserving the old button state
+	 * 2) They do not contain an accurate fingercount, and they are
+	 *    typically send when the number of fingers changes. We cannot use
+	 *    the old finger count as that may mismatch with the amount of
+	 *    touch coordinates we've available in the NEW packet
+	 * 3) Their x data for the second touch is inaccurate leading to
+	 *    a possible jump of the x coordinate by 16 units when the first
+	 *    non NEW packet comes in
+	 * Since problems 2 & 3 cannot be worked around, just ignore them.
+	 */
+	if (pkt_id == V7_PACKET_ID_NEW)
+		return 1;
 
 	alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
 
-	if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) {
-		f->left = (p[0] & 0x80) >> 7;
+	if (pkt_id == V7_PACKET_ID_TWO)
+		f->fingers = alps_get_mt_count(f->mt);
+	else /* pkt_id == V7_PACKET_ID_MULTI */
+		f->fingers = 3 + (p[5] & 0x03);
+
+	f->left = (p[0] & 0x80) >> 7;
+	if (priv->flags & ALPS_BUTTONPAD) {
+		if (p[0] & 0x20)
+			f->fingers++;
+		if (p[0] & 0x10)
+			f->fingers++;
+	} else {
 		f->right = (p[0] & 0x20) >> 5;
 		f->middle = (p[0] & 0x10) >> 4;
 	}
 
-	if (pkt_id == V7_PACKET_ID_TWO)
-		f->fingers = alps_get_mt_count(f->mt);
-	else if (pkt_id == V7_PACKET_ID_MULTI)
-		f->fingers = 3 + (p[5] & 0x03);
+	/* Sometimes a single touch is reported in mt[1] rather then mt[0] */
+	if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) {
+		f->mt[0].x = f->mt[1].x;
+		f->mt[0].y = f->mt[1].y;
+		f->mt[1].x = 0;
+		f->mt[1].y = 0;
+	}
 
 	return 0;
 }
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 30c8b69..354d47e 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -227,6 +227,7 @@
 TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH, TP_DEF_UP_THRESH);
 TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME, TP_DEF_Z_TIME);
 TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV, TP_DEF_JENKS_CURV);
+TRACKPOINT_INT_ATTR(drift_time, TP_DRIFT_TIME, TP_DEF_DRIFT_TIME);
 
 TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0,
 		    TP_DEF_PTSON);
@@ -246,6 +247,7 @@
 	&psmouse_attr_upthresh.dattr.attr,
 	&psmouse_attr_ztime.dattr.attr,
 	&psmouse_attr_jenks.dattr.attr,
+	&psmouse_attr_drift_time.dattr.attr,
 	&psmouse_attr_press_to_select.dattr.attr,
 	&psmouse_attr_skipback.dattr.attr,
 	&psmouse_attr_ext_dev.dattr.attr,
@@ -312,6 +314,7 @@
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, upthresh);
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ztime);
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, jenks);
+	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, drift_time);
 
 	/* toggles */
 	TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, press_to_select);
@@ -332,6 +335,7 @@
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, upthresh);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ztime);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, jenks);
+	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, drift_time);
 	TRACKPOINT_SET_POWER_ON_DEFAULT(tp, inertia);
 
 	/* toggles */
diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h
index ecd0547..5617ed3 100644
--- a/drivers/input/mouse/trackpoint.h
+++ b/drivers/input/mouse/trackpoint.h
@@ -70,6 +70,9 @@
 #define TP_UP_THRESH		0x5A	/* Used to generate a 'click' on Z-axis */
 #define TP_Z_TIME		0x5E	/* How sharp of a press */
 #define TP_JENKS_CURV		0x5D	/* Minimum curvature for double click */
+#define TP_DRIFT_TIME		0x5F	/* How long a 'hands off' condition */
+					/* must last (x*107ms) for drift */
+					/* correction to occur */
 
 /*
  * Toggling Flag bits
@@ -120,6 +123,7 @@
 #define TP_DEF_UP_THRESH	0xFF
 #define TP_DEF_Z_TIME		0x26
 #define TP_DEF_JENKS_CURV	0x87
+#define TP_DEF_DRIFT_TIME	0x05
 
 /* Toggles */
 #define TP_DEF_MB		0x00
@@ -137,6 +141,7 @@
 	unsigned char draghys, mindrag;
 	unsigned char thresh, upthresh;
 	unsigned char ztime, jenks;
+	unsigned char drift_time;
 
 	/* toggles */
 	unsigned char press_to_select;
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index bb07020..95ee92a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -99,13 +99,9 @@
 #define MXT_T6_STATUS_COMSERR	(1 << 2)
 
 /* MXT_GEN_POWER_T7 field */
-struct t7_config {
-	u8 idle;
-	u8 active;
-} __packed;
-
-#define MXT_POWER_CFG_RUN		0
-#define MXT_POWER_CFG_DEEPSLEEP		1
+#define MXT_POWER_IDLEACQINT	0
+#define MXT_POWER_ACTVACQINT	1
+#define MXT_POWER_ACTV2IDLETO	2
 
 /* MXT_GEN_ACQUIRE_T8 field */
 #define MXT_ACQUIRE_CHRGTIME	0
@@ -117,6 +113,7 @@
 #define MXT_ACQUIRE_ATCHCALSTHR	7
 
 /* MXT_TOUCH_MULTI_T9 field */
+#define MXT_TOUCH_CTRL		0
 #define MXT_T9_ORIENT		9
 #define MXT_T9_RANGE		18
 
@@ -256,7 +253,6 @@
 	bool update_input;
 	u8 last_message_count;
 	u8 num_touchids;
-	struct t7_config t7_cfg;
 
 	/* Cached parameters from object table */
 	u16 T5_address;
@@ -672,6 +668,20 @@
 	data->t6_status = status;
 }
 
+static int mxt_write_object(struct mxt_data *data,
+				 u8 type, u8 offset, u8 val)
+{
+	struct mxt_object *object;
+	u16 reg;
+
+	object = mxt_get_object(data, type);
+	if (!object || offset >= mxt_obj_size(object))
+		return -EINVAL;
+
+	reg = object->start_address;
+	return mxt_write_reg(data->client, reg + offset, val);
+}
+
 static void mxt_input_button(struct mxt_data *data, u8 *message)
 {
 	struct input_dev *input = data->input_dev;
@@ -1742,60 +1752,6 @@
 	return error;
 }
 
-static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
-{
-	struct device *dev = &data->client->dev;
-	int error;
-	struct t7_config *new_config;
-	struct t7_config deepsleep = { .active = 0, .idle = 0 };
-
-	if (sleep == MXT_POWER_CFG_DEEPSLEEP)
-		new_config = &deepsleep;
-	else
-		new_config = &data->t7_cfg;
-
-	error = __mxt_write_reg(data->client, data->T7_address,
-				sizeof(data->t7_cfg), new_config);
-	if (error)
-		return error;
-
-	dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n",
-		new_config->active, new_config->idle);
-
-	return 0;
-}
-
-static int mxt_init_t7_power_cfg(struct mxt_data *data)
-{
-	struct device *dev = &data->client->dev;
-	int error;
-	bool retry = false;
-
-recheck:
-	error = __mxt_read_reg(data->client, data->T7_address,
-				sizeof(data->t7_cfg), &data->t7_cfg);
-	if (error)
-		return error;
-
-	if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) {
-		if (!retry) {
-			dev_dbg(dev, "T7 cfg zero, resetting\n");
-			mxt_soft_reset(data);
-			retry = true;
-			goto recheck;
-		} else {
-			dev_dbg(dev, "T7 cfg zero after reset, overriding\n");
-			data->t7_cfg.active = 20;
-			data->t7_cfg.idle = 100;
-			return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
-		}
-	}
-
-	dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n",
-		data->t7_cfg.active, data->t7_cfg.idle);
-	return 0;
-}
-
 static int mxt_configure_objects(struct mxt_data *data,
 				 const struct firmware *cfg)
 {
@@ -1809,12 +1765,6 @@
 			dev_warn(dev, "Error %d updating config\n", error);
 	}
 
-	error = mxt_init_t7_power_cfg(data);
-	if (error) {
-		dev_err(dev, "Failed to initialize power cfg\n");
-		return error;
-	}
-
 	error = mxt_initialize_t9_input_device(data);
 	if (error)
 		return error;
@@ -2093,15 +2043,16 @@
 
 static void mxt_start(struct mxt_data *data)
 {
-	mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
-
-	/* Recalibrate since chip has been in deep sleep */
-	mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+	/* Touch enable */
+	mxt_write_object(data,
+			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
 }
 
 static void mxt_stop(struct mxt_data *data)
 {
-	mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+	/* Touch disable */
+	mxt_write_object(data,
+			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
 }
 
 static int mxt_input_open(struct input_dev *dev)
@@ -2266,6 +2217,8 @@
 	struct mxt_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
+	mxt_soft_reset(data);
+
 	mutex_lock(&input_dev->mutex);
 
 	if (input_dev->users)
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 3793fcc..d4c24fb 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -850,9 +850,11 @@
 }
 
 #define EDT_ATTR_CHECKSET(name, reg) \
+do {								\
 	if (pdata->name >= edt_ft5x06_attr_##name.limit_low &&		\
 	    pdata->name <= edt_ft5x06_attr_##name.limit_high)		\
-		edt_ft5x06_register_write(tsdata, reg, pdata->name)
+		edt_ft5x06_register_write(tsdata, reg, pdata->name);	\
+} while (0)
 
 #define EDT_GET_PROP(name, reg) {				\
 	u32 val;						\
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index e2f9df1..2d7fae9 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -519,6 +519,7 @@
 	[STMPE_IDX_GPDR_LSB]	= STMPE1601_REG_GPIO_SET_DIR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1601_REG_GPIO_RE_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1601_REG_GPIO_FE_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1601_REG_GPIO_PU_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE1601_REG_GPIO_AF_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE1601_REG_INT_STA_GPIO_MSB,
@@ -667,6 +668,7 @@
 	[STMPE_IDX_GPDR_LSB]	= STMPE1801_REG_GPIO_SET_DIR_LOW,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1801_REG_GPIO_RE_LOW,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1801_REG_GPIO_FE_LOW,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1801_REG_GPIO_PULL_UP_LOW,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
 	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1801_REG_INT_STA_GPIO_LOW,
 };
@@ -750,6 +752,8 @@
 	[STMPE_IDX_GPDR_LSB]	= STMPE24XX_REG_GPDR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE24XX_REG_GPRER_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE24XX_REG_GPFER_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE24XX_REG_GPPUR_LSB,
+	[STMPE_IDX_GPPDR_LSB]	= STMPE24XX_REG_GPPDR_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE24XX_REG_GPAFR_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE24XX_REG_IEGPIOR_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE24XX_REG_ISGPIOR_MSB,
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index bee0abf..84adb46 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -188,6 +188,7 @@
 #define STMPE1601_REG_GPIO_ED_MSB		0x8A
 #define STMPE1601_REG_GPIO_RE_LSB		0x8D
 #define STMPE1601_REG_GPIO_FE_LSB		0x8F
+#define STMPE1601_REG_GPIO_PU_LSB		0x91
 #define STMPE1601_REG_GPIO_AF_U_MSB		0x92
 
 #define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
@@ -276,6 +277,8 @@
 #define STMPE24XX_REG_GPEDR_MSB		0x8C
 #define STMPE24XX_REG_GPRER_LSB		0x91
 #define STMPE24XX_REG_GPFER_LSB		0x94
+#define STMPE24XX_REG_GPPUR_LSB		0x97
+#define STMPE24XX_REG_GPPDR_LSB		0x9a
 #define STMPE24XX_REG_GPAFR_U_MSB	0x9B
 
 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO		(1 << 3)
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index 3b73b96..26270c3 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -39,7 +39,7 @@
 
 #define DRV_NAME		"fnic"
 #define DRV_DESCRIPTION		"Cisco FCoE HBA Driver"
-#define DRV_VERSION		"1.6.0.16"
+#define DRV_VERSION		"1.6.0.17"
 #define PFX			DRV_NAME ": "
 #define DFX                     DRV_NAME "%d: "
 
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 2097de4..155b286 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -1892,6 +1892,21 @@
 		goto fnic_abort_cmd_end;
 	}
 
+	/* IO out of order */
+
+	if (!(CMD_FLAGS(sc) & (FNIC_IO_ABORTED | FNIC_IO_DONE))) {
+		spin_unlock_irqrestore(io_lock, flags);
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			"Issuing Host reset due to out of order IO\n");
+
+		if (fnic_host_reset(sc) == FAILED) {
+			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+				"fnic_host_reset failed.\n");
+		}
+		ret = FAILED;
+		goto fnic_abort_cmd_end;
+	}
+
 	CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
 
 	/*
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index e42fff6..8afb016 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1041,7 +1041,7 @@
 		}
 		/* signal not to enter either branch of the if () below */
 		timeleft = 0;
-		rtn = NEEDS_RETRY;
+		rtn = FAILED;
 	} else {
 		timeleft = wait_for_completion_timeout(&done, timeout);
 		rtn = SUCCESS;
@@ -1081,7 +1081,7 @@
 			rtn = FAILED;
 			break;
 		}
-	} else if (!rtn) {
+	} else if (rtn != FAILED) {
 		scsi_abort_eh_cmnd(scmd);
 		rtn = FAILED;
 	}
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index fedab3c..3995169 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2623,8 +2623,9 @@
 				sd_config_discard(sdkp, SD_LBP_WS16);
 
 		} else {	/* LBP VPD page tells us what to use */
-
-			if (sdkp->lbpws)
+			if (sdkp->lbpu && sdkp->max_unmap_blocks && !sdkp->lbprz)
+				sd_config_discard(sdkp, SD_LBP_UNMAP);
+			else if (sdkp->lbpws)
 				sd_config_discard(sdkp, SD_LBP_WS16);
 			else if (sdkp->lbpws10)
 				sd_config_discard(sdkp, SD_LBP_WS10);
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index ed71b53..cb807d0 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -713,9 +713,13 @@
 			r = -EFAULT;
 			break;
 		}
-		if ((a.avail_user_addr & (sizeof *vq->avail->ring - 1)) ||
-		    (a.used_user_addr & (sizeof *vq->used->ring - 1)) ||
-		    (a.log_guest_addr & (sizeof *vq->used->ring - 1))) {
+
+		/* Make sure it's safe to cast pointers to vring types. */
+		BUILD_BUG_ON(__alignof__ *vq->avail > VRING_AVAIL_ALIGN_SIZE);
+		BUILD_BUG_ON(__alignof__ *vq->used > VRING_USED_ALIGN_SIZE);
+		if ((a.avail_user_addr & (VRING_AVAIL_ALIGN_SIZE - 1)) ||
+		    (a.used_user_addr & (VRING_USED_ALIGN_SIZE - 1)) ||
+		    (a.log_guest_addr & (sizeof(u64) - 1))) {
 			r = -EINVAL;
 			break;
 		}
diff --git a/drivers/video/fbdev/core/fb_defio.c b/drivers/video/fbdev/core/fb_defio.c
index 900aa4e..d6cab1f 100644
--- a/drivers/video/fbdev/core/fb_defio.c
+++ b/drivers/video/fbdev/core/fb_defio.c
@@ -83,9 +83,10 @@
 	cancel_delayed_work_sync(&info->deferred_work);
 
 	/* Run it immediately */
-	err = schedule_delayed_work(&info->deferred_work, 0);
+	schedule_delayed_work(&info->deferred_work, 0);
 	mutex_unlock(&inode->i_mutex);
-	return err;
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(fb_deferred_io_fsync);
 
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
index 87accdb..ac83ef5 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_pll.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
@@ -132,7 +132,6 @@
 	.mX_max = 127,
 	.fint_min = 500000,
 	.fint_max = 2500000,
-	.clkdco_max = 1800000000,
 
 	.clkdco_min = 500000000,
 	.clkdco_low = 1000000000,
@@ -156,7 +155,6 @@
 	.mX_max = 127,
 	.fint_min = 620000,
 	.fint_max = 2500000,
-	.clkdco_max = 1800000000,
 
 	.clkdco_min = 750000000,
 	.clkdco_low = 1500000000,
diff --git a/drivers/video/fbdev/omap2/dss/pll.c b/drivers/video/fbdev/omap2/dss/pll.c
index 50bc62c5..335ffac 100644
--- a/drivers/video/fbdev/omap2/dss/pll.c
+++ b/drivers/video/fbdev/omap2/dss/pll.c
@@ -97,7 +97,8 @@
 	return 0;
 
 err_enable:
-	regulator_disable(pll->regulator);
+	if (pll->regulator)
+		regulator_disable(pll->regulator);
 err_reg:
 	clk_disable_unprepare(pll->clkin);
 	return r;
diff --git a/drivers/video/fbdev/omap2/dss/sdi.c b/drivers/video/fbdev/omap2/dss/sdi.c
index d51a9830..5c2ccab 100644
--- a/drivers/video/fbdev/omap2/dss/sdi.c
+++ b/drivers/video/fbdev/omap2/dss/sdi.c
@@ -342,6 +342,8 @@
 	out->output_type = OMAP_DISPLAY_TYPE_SDI;
 	out->name = "sdi.0";
 	out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
+	/* We have SDI only on OMAP3, where it's on port 1 */
+	out->port_num = 1;
 	out->ops.sdi = &sdi_ops;
 	out->owner = THIS_MODULE;
 
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index 940cd19..10fbfd8 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -21,6 +21,21 @@
 module_param(nologo, bool, 0);
 MODULE_PARM_DESC(nologo, "Disables startup logo");
 
+/*
+ * Logos are located in the initdata, and will be freed in kernel_init.
+ * Use late_init to mark the logos as freed to prevent any further use.
+ */
+
+static bool logos_freed;
+
+static int __init fb_logo_late_init(void)
+{
+	logos_freed = true;
+	return 0;
+}
+
+late_initcall(fb_logo_late_init);
+
 /* logo's are marked __initdata. Use __init_refok to tell
  * modpost that it is intended that this function uses data
  * marked __initdata.
@@ -29,7 +44,7 @@
 {
 	const struct linux_logo *logo = NULL;
 
-	if (nologo)
+	if (nologo || logos_freed)
 		return NULL;
 
 	if (depth >= 1) {
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e5d3ead..bed4308 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -5166,8 +5166,8 @@
 
 	/* fallback to generic here if not in extents fmt */
 	if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
-		return __generic_block_fiemap(inode, fieinfo, start, len,
-					      ext4_get_block);
+		return generic_block_fiemap(inode, fieinfo, start, len,
+			ext4_get_block);
 
 	if (fiemap_check_flags(fieinfo, EXT4_FIEMAP_FLAGS))
 		return -EBADR;
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 513c12c..8131be8 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -273,19 +273,24 @@
  * we determine this extent as a data or a hole according to whether the
  * page cache has data or not.
  */
-static int ext4_find_unwritten_pgoff(struct inode *inode, int whence,
-				     loff_t endoff, loff_t *offset)
+static int ext4_find_unwritten_pgoff(struct inode *inode,
+				     int whence,
+				     struct ext4_map_blocks *map,
+				     loff_t *offset)
 {
 	struct pagevec pvec;
+	unsigned int blkbits;
 	pgoff_t index;
 	pgoff_t end;
+	loff_t endoff;
 	loff_t startoff;
 	loff_t lastoff;
 	int found = 0;
 
+	blkbits = inode->i_sb->s_blocksize_bits;
 	startoff = *offset;
 	lastoff = startoff;
-
+	endoff = (loff_t)(map->m_lblk + map->m_len) << blkbits;
 
 	index = startoff >> PAGE_CACHE_SHIFT;
 	end = endoff >> PAGE_CACHE_SHIFT;
@@ -403,144 +408,147 @@
 static loff_t ext4_seek_data(struct file *file, loff_t offset, loff_t maxsize)
 {
 	struct inode *inode = file->f_mapping->host;
-	struct fiemap_extent_info fie;
-	struct fiemap_extent ext[2];
-	loff_t next;
-	int i, ret = 0;
+	struct ext4_map_blocks map;
+	struct extent_status es;
+	ext4_lblk_t start, last, end;
+	loff_t dataoff, isize;
+	int blkbits;
+	int ret = 0;
 
 	mutex_lock(&inode->i_mutex);
-	if (offset >= inode->i_size) {
+
+	isize = i_size_read(inode);
+	if (offset >= isize) {
 		mutex_unlock(&inode->i_mutex);
 		return -ENXIO;
 	}
-	fie.fi_flags = 0;
-	fie.fi_extents_max = 2;
-	fie.fi_extents_start = (struct fiemap_extent __user *) &ext;
-	while (1) {
-		mm_segment_t old_fs = get_fs();
 
-		fie.fi_extents_mapped = 0;
-		memset(ext, 0, sizeof(*ext) * fie.fi_extents_max);
+	blkbits = inode->i_sb->s_blocksize_bits;
+	start = offset >> blkbits;
+	last = start;
+	end = isize >> blkbits;
+	dataoff = offset;
 
-		set_fs(get_ds());
-		ret = ext4_fiemap(inode, &fie, offset, maxsize - offset);
-		set_fs(old_fs);
-		if (ret)
-			break;
-
-		/* No extents found, EOF */
-		if (!fie.fi_extents_mapped) {
-			ret = -ENXIO;
+	do {
+		map.m_lblk = last;
+		map.m_len = end - last + 1;
+		ret = ext4_map_blocks(NULL, inode, &map, 0);
+		if (ret > 0 && !(map.m_flags & EXT4_MAP_UNWRITTEN)) {
+			if (last != start)
+				dataoff = (loff_t)last << blkbits;
 			break;
 		}
-		for (i = 0; i < fie.fi_extents_mapped; i++) {
-			next = (loff_t)(ext[i].fe_length + ext[i].fe_logical);
 
-			if (offset < (loff_t)ext[i].fe_logical)
-				offset = (loff_t)ext[i].fe_logical;
-			/*
-			 * If extent is not unwritten, then it contains valid
-			 * data, mapped or delayed.
-			 */
-			if (!(ext[i].fe_flags & FIEMAP_EXTENT_UNWRITTEN))
-				goto out;
-
-			/*
-			 * If there is a unwritten extent at this offset,
-			 * it will be as a data or a hole according to page
-			 * cache that has data or not.
-			 */
-			if (ext4_find_unwritten_pgoff(inode, SEEK_DATA,
-						      next, &offset))
-				goto out;
-
-			if (ext[i].fe_flags & FIEMAP_EXTENT_LAST) {
-				ret = -ENXIO;
-				goto out;
-			}
-			offset = next;
+		/*
+		 * If there is a delay extent at this offset,
+		 * it will be as a data.
+		 */
+		ext4_es_find_delayed_extent_range(inode, last, last, &es);
+		if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) {
+			if (last != start)
+				dataoff = (loff_t)last << blkbits;
+			break;
 		}
-	}
-	if (offset > inode->i_size)
-		offset = inode->i_size;
-out:
+
+		/*
+		 * If there is a unwritten extent at this offset,
+		 * it will be as a data or a hole according to page
+		 * cache that has data or not.
+		 */
+		if (map.m_flags & EXT4_MAP_UNWRITTEN) {
+			int unwritten;
+			unwritten = ext4_find_unwritten_pgoff(inode, SEEK_DATA,
+							      &map, &dataoff);
+			if (unwritten)
+				break;
+		}
+
+		last++;
+		dataoff = (loff_t)last << blkbits;
+	} while (last <= end);
+
 	mutex_unlock(&inode->i_mutex);
-	if (ret)
-		return ret;
 
-	return vfs_setpos(file, offset, maxsize);
+	if (dataoff > isize)
+		return -ENXIO;
+
+	return vfs_setpos(file, dataoff, maxsize);
 }
 
 /*
- * ext4_seek_hole() retrieves the offset for SEEK_HOLE
+ * ext4_seek_hole() retrieves the offset for SEEK_HOLE.
  */
 static loff_t ext4_seek_hole(struct file *file, loff_t offset, loff_t maxsize)
 {
 	struct inode *inode = file->f_mapping->host;
-	struct fiemap_extent_info fie;
-	struct fiemap_extent ext[2];
-	loff_t next;
-	int i, ret = 0;
+	struct ext4_map_blocks map;
+	struct extent_status es;
+	ext4_lblk_t start, last, end;
+	loff_t holeoff, isize;
+	int blkbits;
+	int ret = 0;
 
 	mutex_lock(&inode->i_mutex);
-	if (offset >= inode->i_size) {
+
+	isize = i_size_read(inode);
+	if (offset >= isize) {
 		mutex_unlock(&inode->i_mutex);
 		return -ENXIO;
 	}
 
-	fie.fi_flags = 0;
-	fie.fi_extents_max = 2;
-	fie.fi_extents_start = (struct fiemap_extent __user *)&ext;
-	while (1) {
-		mm_segment_t old_fs = get_fs();
+	blkbits = inode->i_sb->s_blocksize_bits;
+	start = offset >> blkbits;
+	last = start;
+	end = isize >> blkbits;
+	holeoff = offset;
 
-		fie.fi_extents_mapped = 0;
-		memset(ext, 0, sizeof(*ext));
+	do {
+		map.m_lblk = last;
+		map.m_len = end - last + 1;
+		ret = ext4_map_blocks(NULL, inode, &map, 0);
+		if (ret > 0 && !(map.m_flags & EXT4_MAP_UNWRITTEN)) {
+			last += ret;
+			holeoff = (loff_t)last << blkbits;
+			continue;
+		}
 
-		set_fs(get_ds());
-		ret = ext4_fiemap(inode, &fie, offset, maxsize - offset);
-		set_fs(old_fs);
-		if (ret)
-			break;
+		/*
+		 * If there is a delay extent at this offset,
+		 * we will skip this extent.
+		 */
+		ext4_es_find_delayed_extent_range(inode, last, last, &es);
+		if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) {
+			last = es.es_lblk + es.es_len;
+			holeoff = (loff_t)last << blkbits;
+			continue;
+		}
 
-		/* No extents found */
-		if (!fie.fi_extents_mapped)
-			break;
-
-		for (i = 0; i < fie.fi_extents_mapped; i++) {
-			next = (loff_t)(ext[i].fe_logical + ext[i].fe_length);
-			/*
-			 * If extent is not unwritten, then it contains valid
-			 * data, mapped or delayed.
-			 */
-			if (!(ext[i].fe_flags & FIEMAP_EXTENT_UNWRITTEN)) {
-				if (offset < (loff_t)ext[i].fe_logical)
-					goto out;
-				offset = next;
+		/*
+		 * If there is a unwritten extent at this offset,
+		 * it will be as a data or a hole according to page
+		 * cache that has data or not.
+		 */
+		if (map.m_flags & EXT4_MAP_UNWRITTEN) {
+			int unwritten;
+			unwritten = ext4_find_unwritten_pgoff(inode, SEEK_HOLE,
+							      &map, &holeoff);
+			if (!unwritten) {
+				last += ret;
+				holeoff = (loff_t)last << blkbits;
 				continue;
 			}
-			/*
-			 * If there is a unwritten extent at this offset,
-			 * it will be as a data or a hole according to page
-			 * cache that has data or not.
-			 */
-			if (ext4_find_unwritten_pgoff(inode, SEEK_HOLE,
-						      next, &offset))
-				goto out;
-
-			offset = next;
-			if (ext[i].fe_flags & FIEMAP_EXTENT_LAST)
-				goto out;
 		}
-	}
-	if (offset > inode->i_size)
-		offset = inode->i_size;
-out:
-	mutex_unlock(&inode->i_mutex);
-	if (ret)
-		return ret;
 
-	return vfs_setpos(file, offset, maxsize);
+		/* find a hole */
+		break;
+	} while (last <= end);
+
+	mutex_unlock(&inode->i_mutex);
+
+	if (holeoff > isize)
+		holeoff = isize;
+
+	return vfs_setpos(file, holeoff, maxsize);
 }
 
 /*
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index bf76f40..8a8ec62 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -24,6 +24,18 @@
 		return -EPERM;
 
 	/*
+	 * If we are not using the primary superblock/GDT copy don't resize,
+         * because the user tools have no way of handling this.  Probably a
+         * bad time to do it anyways.
+         */
+	if (EXT4_SB(sb)->s_sbh->b_blocknr !=
+	    le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) {
+		ext4_warning(sb, "won't resize using backup superblock at %llu",
+			(unsigned long long)EXT4_SB(sb)->s_sbh->b_blocknr);
+		return -EPERM;
+	}
+
+	/*
 	 * We are not allowed to do online-resizing on a filesystem mounted
 	 * with error, because it can destroy the filesystem easily.
 	 */
@@ -758,18 +770,6 @@
 		       "EXT4-fs: ext4_add_new_gdb: adding group block %lu\n",
 		       gdb_num);
 
-	/*
-	 * If we are not using the primary superblock/GDT copy don't resize,
-         * because the user tools have no way of handling this.  Probably a
-         * bad time to do it anyways.
-         */
-	if (EXT4_SB(sb)->s_sbh->b_blocknr !=
-	    le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) {
-		ext4_warning(sb, "won't resize using backup superblock at %llu",
-			(unsigned long long)EXT4_SB(sb)->s_sbh->b_blocknr);
-		return -EPERM;
-	}
-
 	gdb_bh = sb_bread(sb, gdblock);
 	if (!gdb_bh)
 		return -EIO;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 43c92b1..74c5f53 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3482,7 +3482,7 @@
 	if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
 				       EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) &&
 	    EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_GDT_CSUM))
-		ext4_warning(sb, KERN_INFO "metadata_csum and uninit_bg are "
+		ext4_warning(sb, "metadata_csum and uninit_bg are "
 			     "redundant flags; please run fsck.");
 
 	/* Check for a known checksum algorithm */
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 575a86c..f742b67 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -50,6 +50,8 @@
 	STMPE_IDX_GPEDR_MSB,
 	STMPE_IDX_GPRER_LSB,
 	STMPE_IDX_GPFER_LSB,
+	STMPE_IDX_GPPUR_LSB,
+	STMPE_IDX_GPPDR_LSB,
 	STMPE_IDX_GPAFR_U_MSB,
 	STMPE_IDX_IEGPIOR_LSB,
 	STMPE_IDX_ISGPIOR_LSB,
@@ -113,24 +115,6 @@
 extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
 extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
 
-struct matrix_keymap_data;
-
-/**
- * struct stmpe_keypad_platform_data - STMPE keypad platform data
- * @keymap_data: key map table and size
- * @debounce_ms: debounce interval, in ms.  Maximum is
- *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
- * @scan_count: number of key scanning cycles to confirm key data.
- *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
- * @no_autorepeat: disable key autorepeat
- */
-struct stmpe_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-	unsigned int debounce_ms;
-	unsigned int scan_count;
-	bool no_autorepeat;
-};
-
 #define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
 
 /**
@@ -199,7 +183,6 @@
  * @irq_gpio: gpio number over which irq will be requested (significant only if
  *	      irq_over_gpio is true)
  * @gpio: GPIO-specific platform data
- * @keypad: keypad-specific platform data
  * @ts: touchscreen-specific platform data
  */
 struct stmpe_platform_data {
@@ -212,7 +195,6 @@
 	int autosleep_timeout;
 
 	struct stmpe_gpio_platform_data *gpio;
-	struct stmpe_keypad_platform_data *keypad;
 	struct stmpe_ts_platform_data *ts;
 };
 
diff --git a/include/linux/mm.h b/include/linux/mm.h
index f80d019..80fc92a 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1952,7 +1952,7 @@
 #if VM_GROWSUP
 extern int expand_upwards(struct vm_area_struct *vma, unsigned long address);
 #else
-  #define expand_upwards(vma, address) do { } while (0)
+  #define expand_upwards(vma, address) (0)
 #endif
 
 /* Look up the first VMA which satisfies  addr < vm_end,  NULL if none. */
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 1e7f74a..b429b73 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -857,7 +857,7 @@
 }
 
 /**
- * params_channels - Get the sample rate from the hw params
+ * params_rate - Get the sample rate from the hw params
  * @p: hw params
  */
 static inline unsigned int params_rate(const struct snd_pcm_hw_params *p)
@@ -866,7 +866,7 @@
 }
 
 /**
- * params_channels - Get the period size (in frames) from the hw params
+ * params_period_size - Get the period size (in frames) from the hw params
  * @p: hw params
  */
 static inline unsigned int params_period_size(const struct snd_pcm_hw_params *p)
@@ -875,7 +875,7 @@
 }
 
 /**
- * params_channels - Get the number of periods from the hw params
+ * params_periods - Get the number of periods from the hw params
  * @p: hw params
  */
 static inline unsigned int params_periods(const struct snd_pcm_hw_params *p)
@@ -884,7 +884,7 @@
 }
 
 /**
- * params_channels - Get the buffer size (in frames) from the hw params
+ * params_buffer_size - Get the buffer size (in frames) from the hw params
  * @p: hw params
  */
 static inline unsigned int params_buffer_size(const struct snd_pcm_hw_params *p)
@@ -893,7 +893,7 @@
 }
 
 /**
- * params_channels - Get the buffer size (in bytes) from the hw params
+ * params_buffer_bytes - Get the buffer size (in bytes) from the hw params
  * @p: hw params
  */
 static inline unsigned int params_buffer_bytes(const struct snd_pcm_hw_params *p)
diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h
index 61c818a..a3318f3 100644
--- a/include/uapi/linux/virtio_ring.h
+++ b/include/uapi/linux/virtio_ring.h
@@ -101,6 +101,13 @@
 	struct vring_used *used;
 };
 
+/* Alignment requirements for vring elements.
+ * When using pre-virtio 1.0 layout, these fall out naturally.
+ */
+#define VRING_AVAIL_ALIGN_SIZE 2
+#define VRING_USED_ALIGN_SIZE 4
+#define VRING_DESC_ALIGN_SIZE 16
+
 /* The standard layout for the ring is a continuous chunk of memory which looks
  * like this.  We assume num is a power of 2.
  *
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 37c69ab..072566d 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -72,6 +72,8 @@
 #include <linux/fs_struct.h>
 #include <linux/compat.h>
 #include <linux/ctype.h>
+#include <linux/string.h>
+#include <uapi/linux/limits.h>
 
 #include "audit.h"
 
@@ -1861,8 +1863,7 @@
 	}
 
 	list_for_each_entry_reverse(n, &context->names_list, list) {
-		/* does the name pointer match? */
-		if (!n->name || n->name->name != name->name)
+		if (!n->name || strcmp(n->name->name, name->name))
 			continue;
 
 		/* match the correct record type */
@@ -1881,14 +1882,44 @@
 	n = audit_alloc_name(context, AUDIT_TYPE_UNKNOWN);
 	if (!n)
 		return;
-	if (name)
-		/* since name is not NULL we know there is already a matching
-		 * name record, see audit_getname(), so there must be a type
-		 * mismatch; reuse the string path since the original name
-		 * record will keep the string valid until we free it in
-		 * audit_free_names() */
-		n->name = name;
+	/* unfortunately, while we may have a path name to record with the
+	 * inode, we can't always rely on the string lasting until the end of
+	 * the syscall so we need to create our own copy, it may fail due to
+	 * memory allocation issues, but we do our best */
+	if (name) {
+		/* we can't use getname_kernel() due to size limits */
+		size_t len = strlen(name->name) + 1;
+		struct filename *new = __getname();
 
+		if (unlikely(!new))
+			goto out;
+
+		if (len <= (PATH_MAX - sizeof(*new))) {
+			new->name = (char *)(new) + sizeof(*new);
+			new->separate = false;
+		} else if (len <= PATH_MAX) {
+			/* this looks odd, but is due to final_putname() */
+			struct filename *new2;
+
+			new2 = kmalloc(sizeof(*new2), GFP_KERNEL);
+			if (unlikely(!new2)) {
+				__putname(new);
+				goto out;
+			}
+			new2->name = (char *)new;
+			new2->separate = true;
+			new = new2;
+		} else {
+			/* we should never get here, but let's be safe */
+			__putname(new);
+			goto out;
+		}
+		strlcpy((char *)new->name, name->name, len);
+		new->uptr = NULL;
+		new->aname = n;
+		n->name = new;
+		n->name_put = true;
+	}
 out:
 	if (parent) {
 		n->name_len = n->name ? parent_len(n->name->name) : AUDIT_NAME_FULL;
diff --git a/mm/memory.c b/mm/memory.c
index ca920d1..d7e497e 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2593,7 +2593,7 @@
 		if (prev && prev->vm_end == address)
 			return prev->vm_flags & VM_GROWSDOWN ? 0 : -ENOMEM;
 
-		expand_downwards(vma, address - PAGE_SIZE);
+		return expand_downwards(vma, address - PAGE_SIZE);
 	}
 	if ((vma->vm_flags & VM_GROWSUP) && address + PAGE_SIZE == vma->vm_end) {
 		struct vm_area_struct *next = vma->vm_next;
@@ -2602,7 +2602,7 @@
 		if (next && next->vm_start == address + PAGE_SIZE)
 			return next->vm_flags & VM_GROWSUP ? 0 : -ENOMEM;
 
-		expand_upwards(vma, address + PAGE_SIZE);
+		return expand_upwards(vma, address + PAGE_SIZE);
 	}
 	return 0;
 }
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 22ba971..29c8675 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -175,7 +175,7 @@
 	  Most distributions have a CRDA package.  So if unsure, say N.
 
 config CFG80211_WEXT
-	bool
+	bool "cfg80211 wireless extensions compatibility"
 	depends on CFG80211
 	select WEXT_CORE
 	help
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 81fe146..c0fbe18 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -784,8 +784,8 @@
 static int rt5677_dsp_vad_get(struct snd_kcontrol *kcontrol,
 		struct snd_ctl_elem_value *ucontrol)
 {
-	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct rt5677_priv *rt5677 = snd_soc_component_get_drvdata(component);
 
 	ucontrol->value.integer.value[0] = rt5677->dsp_vad_en;
 
@@ -795,8 +795,9 @@
 static int rt5677_dsp_vad_put(struct snd_kcontrol *kcontrol,
 		struct snd_ctl_elem_value *ucontrol)
 {
-	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct rt5677_priv *rt5677 = snd_soc_component_get_drvdata(component);
+	struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
 
 	rt5677->dsp_vad_en = !!ucontrol->value.integer.value[0];
 
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index b93168d..8d18bbd 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -209,16 +209,9 @@
 
 	switch (config->chan_nr) {
 	case EIGHT_CHANNEL_SUPPORT:
-		ch_reg = 3;
-		break;
 	case SIX_CHANNEL_SUPPORT:
-		ch_reg = 2;
-		break;
 	case FOUR_CHANNEL_SUPPORT:
-		ch_reg = 1;
-		break;
 	case TWO_CHANNEL_SUPPORT:
-		ch_reg = 0;
 		break;
 	default:
 		dev_err(dev->dev, "channel not supported\n");
@@ -227,18 +220,22 @@
 
 	i2s_disable_channels(dev, substream->stream);
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		i2s_write_reg(dev->i2s_base, TCR(ch_reg), xfer_resolution);
-		i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
-		irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
-		i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
-		i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
-	} else {
-		i2s_write_reg(dev->i2s_base, RCR(ch_reg), xfer_resolution);
-		i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
-		irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
-		i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
-		i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
+	for (ch_reg = 0; ch_reg < (config->chan_nr / 2); ch_reg++) {
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			i2s_write_reg(dev->i2s_base, TCR(ch_reg),
+				      xfer_resolution);
+			i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
+			irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
+			i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
+			i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
+		} else {
+			i2s_write_reg(dev->i2s_base, RCR(ch_reg),
+				      xfer_resolution);
+			i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
+			irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
+			i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
+			i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
+		}
 	}
 
 	i2s_write_reg(dev->i2s_base, CCR, ccr);
@@ -263,6 +260,19 @@
 	snd_soc_dai_set_dma_data(dai, substream, NULL);
 }
 
+static int dw_i2s_prepare(struct snd_pcm_substream *substream,
+			  struct snd_soc_dai *dai)
+{
+	struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		i2s_write_reg(dev->i2s_base, TXFFR, 1);
+	else
+		i2s_write_reg(dev->i2s_base, RXFFR, 1);
+
+	return 0;
+}
+
 static int dw_i2s_trigger(struct snd_pcm_substream *substream,
 		int cmd, struct snd_soc_dai *dai)
 {
@@ -294,6 +304,7 @@
 	.startup	= dw_i2s_startup,
 	.shutdown	= dw_i2s_shutdown,
 	.hw_params	= dw_i2s_hw_params,
+	.prepare	= dw_i2s_prepare,
 	.trigger	= dw_i2s_trigger,
 };
 
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index e989ecf..f86de12 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -89,7 +89,7 @@
 
 config SND_SOC_INTEL_BYTCR_RT5640_MACH
 	tristate "ASoC Audio DSP Support for MID BYT Platform"
-	depends on X86
+	depends on X86 && I2C
 	select SND_SOC_RT5640
 	select SND_SST_MFLD_PLATFORM
 	select SND_SST_IPC_ACPI
@@ -101,7 +101,7 @@
 
 config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
         tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
-        depends on X86_INTEL_LPSS
+        depends on X86_INTEL_LPSS && I2C
         select SND_SOC_RT5670
         select SND_SST_MFLD_PLATFORM
         select SND_SST_IPC_ACPI
diff --git a/sound/soc/intel/bytcr_dpcm_rt5640.c b/sound/soc/intel/bytcr_dpcm_rt5640.c
index f5d0fc1..eef0c56 100644
--- a/sound/soc/intel/bytcr_dpcm_rt5640.c
+++ b/sound/soc/intel/bytcr_dpcm_rt5640.c
@@ -227,4 +227,4 @@
 MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver");
 MODULE_AUTHOR("Subhransu S. Prusty <subhransu.s.prusty@intel.com>");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:bytrt5640-audio");
+MODULE_ALIAS("platform:bytt100_rt5640");
diff --git a/sound/soc/intel/sst-firmware.c b/sound/soc/intel/sst-firmware.c
index 4a5bde9..ef2e8b5 100644
--- a/sound/soc/intel/sst-firmware.c
+++ b/sound/soc/intel/sst-firmware.c
@@ -763,8 +763,12 @@
 		/* does block span more than 1 section */
 		if (ba->offset >= block->offset && ba->offset < block_end) {
 
+			/* add block */
+			list_move(&block->list, &dsp->used_block_list);
+			list_add(&block->module_list, block_list);
 			/* align ba to block boundary */
-			ba->offset = block->offset;
+			ba->size -= block_end - ba->offset;
+			ba->offset = block_end;
 
 			err = block_alloc_contiguous(dsp, ba, block_list);
 			if (err < 0)
diff --git a/sound/soc/intel/sst/sst_acpi.c b/sound/soc/intel/sst/sst_acpi.c
index 3abc29e..2ac72eb 100644
--- a/sound/soc/intel/sst/sst_acpi.c
+++ b/sound/soc/intel/sst/sst_acpi.c
@@ -343,7 +343,7 @@
 }
 
 static struct sst_machines sst_acpi_bytcr[] = {
-	{"10EC5640", "T100", "bytt100_rt5640", NULL, "fw_sst_0f28.bin",
+	{"10EC5640", "T100", "bytt100_rt5640", NULL, "intel/fw_sst_0f28.bin",
 						&byt_rvp_platform_data },
 	{},
 };
diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index 26ec511..13d8507 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -454,11 +454,11 @@
 
 	i2s->playback_dma_data.addr = res->start + I2S_TXDR;
 	i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	i2s->playback_dma_data.maxburst = 16;
+	i2s->playback_dma_data.maxburst = 4;
 
 	i2s->capture_dma_data.addr = res->start + I2S_RXDR;
 	i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	i2s->capture_dma_data.maxburst = 16;
+	i2s->capture_dma_data.maxburst = 4;
 
 	i2s->dev = &pdev->dev;
 	dev_set_drvdata(&pdev->dev, i2s);
diff --git a/sound/soc/rockchip/rockchip_i2s.h b/sound/soc/rockchip/rockchip_i2s.h
index 89a5d8b..93f456f 100644
--- a/sound/soc/rockchip/rockchip_i2s.h
+++ b/sound/soc/rockchip/rockchip_i2s.h
@@ -127,7 +127,7 @@
 #define I2S_DMACR_TDE_DISABLE	(0 << I2S_DMACR_TDE_SHIFT)
 #define I2S_DMACR_TDE_ENABLE	(1 << I2S_DMACR_TDE_SHIFT)
 #define I2S_DMACR_TDL_SHIFT	0
-#define I2S_DMACR_TDL(x)	((x - 1) << I2S_DMACR_TDL_SHIFT)
+#define I2S_DMACR_TDL(x)	((x) << I2S_DMACR_TDL_SHIFT)
 #define I2S_DMACR_TDL_MASK	(0x1f << I2S_DMACR_TDL_SHIFT)
 
 /*
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 985052b..2c62620 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3230,7 +3230,7 @@
 				   const char *propname)
 {
 	struct device_node *np = card->dev->of_node;
-	int num_routes, old_routes;
+	int num_routes;
 	struct snd_soc_dapm_route *routes;
 	int i, ret;
 
@@ -3248,9 +3248,7 @@
 		return -EINVAL;
 	}
 
-	old_routes = card->num_dapm_routes;
-	routes = devm_kzalloc(card->dev,
-			      (old_routes + num_routes) * sizeof(*routes),
+	routes = devm_kzalloc(card->dev, num_routes * sizeof(*routes),
 			      GFP_KERNEL);
 	if (!routes) {
 		dev_err(card->dev,
@@ -3258,11 +3256,9 @@
 		return -EINVAL;
 	}
 
-	memcpy(routes, card->dapm_routes, old_routes * sizeof(*routes));
-
 	for (i = 0; i < num_routes; i++) {
 		ret = of_property_read_string_index(np, propname,
-			2 * i, &routes[old_routes + i].sink);
+			2 * i, &routes[i].sink);
 		if (ret) {
 			dev_err(card->dev,
 				"ASoC: Property '%s' index %d could not be read: %d\n",
@@ -3270,7 +3266,7 @@
 			return -EINVAL;
 		}
 		ret = of_property_read_string_index(np, propname,
-			(2 * i) + 1, &routes[old_routes + i].source);
+			(2 * i) + 1, &routes[i].source);
 		if (ret) {
 			dev_err(card->dev,
 				"ASoC: Property '%s' index %d could not be read: %d\n",
@@ -3279,7 +3275,7 @@
 		}
 	}
 
-	card->num_dapm_routes += num_routes;
+	card->num_dapm_routes = num_routes;
 	card->dapm_routes = routes;
 
 	return 0;