Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Filipe is nailing down some problems with our skinny extent variation, and Dave's patch fixes endian problems in the new super block checks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix race that makes btrfs_lookup_extent_info miss skinny extent items Btrfs: properly clean up btrfs_end_io_wq_cache Btrfs: fix invalid leaf slot access in btrfs_lookup_extent() btrfs: use macro accessors in superblock validation checks
diff --git a/Documentation/.gitignore b/Documentation/.gitignore deleted file mode 100644 index bcd907b..0000000 --- a/Documentation/.gitignore +++ /dev/null
@@ -1,7 +0,0 @@ -filesystems/dnotify_test -laptops/dslm -timers/hpet_example -vm/hugepage-mmap -vm/hugepage-shm -vm/map_hugetlb -
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 27e67a9..1750fce 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX
@@ -287,6 +287,8 @@ - semantics and behavior of local atomic operations. lockdep-design.txt - documentation on the runtime locking correctness validator. +locking/ + - directory with info about kernel locking primitives lockstat.txt - info on collecting statistics on locks (and contention). lockup-watchdogs.txt
diff --git a/Documentation/ABI/removed/net_dma b/Documentation/ABI/removed/net_dma new file mode 100644 index 0000000..a173aec --- /dev/null +++ b/Documentation/ABI/removed/net_dma
@@ -0,0 +1,8 @@ +What: tcp_dma_copybreak sysctl +Date: Removed in kernel v3.13 +Contact: Dan Williams <dan.j.williams@intel.com> +Description: + Formerly the lower limit, in bytes, of the size of socket reads + that will be offloaded to a DMA copy engine. Removed due to + coherency issues of the cpu potentially touching the buffers + while dma is in flight.
diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node index ce259c1..5b2d0f0 100644 --- a/Documentation/ABI/stable/sysfs-devices-node +++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -85,14 +85,6 @@ will be compacted. When it completes, memory will be freed into blocks which have as many contiguous pages as possible -What: /sys/devices/system/node/nodeX/scan_unevictable_pages -Date: October 2008 -Contact: Lee Schermerhorn <lee.schermerhorn@hp.com> -Description: - When set, it triggers scanning the node's unevictable lists - and move any pages that have become evictable onto the respective - zone's inactive list. See mm/vmscan.c - What: /sys/devices/system/node/nodeX/hugepages/hugepages-<size>/ Date: December 2009 Contact: Lee Schermerhorn <lee.schermerhorn@hp.com>
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac1 b/Documentation/ABI/testing/configfs-usb-gadget-uac1 new file mode 100644 index 0000000..8ba9a12 --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-uac1
@@ -0,0 +1,12 @@ +What: /config/usb-gadget/gadget/functions/uac1.name +Date: Sep 2014 +KernelVersion: 3.18 +Description: + The attributes: + + audio_buf_size - audio buffer size + fn_cap - capture pcm device file name + fn_cntl - control device file name + fn_play - playback pcm device file name + req_buf_size - ISO OUT endpoint request buffer size + req_count - ISO OUT endpoint request count
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/Documentation/ABI/testing/configfs-usb-gadget-uac2 new file mode 100644 index 0000000..2bfdd4e --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-uac2
@@ -0,0 +1,12 @@ +What: /config/usb-gadget/gadget/functions/uac2.name +Date: Sep 2014 +KernelVersion: 3.18 +Description: + The attributes: + + c_chmask - capture channel mask + c_srate - capture sampling rate + c_ssize - capture sample size (bytes) + p_chmask - playback channel mask + p_srate - playback sampling rate + p_ssize - playback sample size (bytes)
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index 279da08..8df0039 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block
@@ -53,6 +53,14 @@ 512 bytes of data. +What: /sys/block/<disk>/integrity/device_is_integrity_capable +Date: July 2014 +Contact: Martin K. Petersen <martin.petersen@oracle.com> +Description: + Indicates whether a storage device is capable of storing + integrity metadata. Set if the device is T10 PI-capable. + + What: /sys/block/<disk>/integrity/write_generate Date: June 2008 Contact: Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index 70ec992..a6148ea 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram
@@ -77,11 +77,14 @@ Date: August 2010 Contact: Nitin Gupta <ngupta@vflare.org> Description: - The notify_free file is read-only and specifies the number of - swap slot free notifications received by this device. These - notifications are sent to a swap block device when a swap slot - is freed. This statistic is applicable only when this disk is - being used as a swap disk. + The notify_free file is read-only. Depending on device usage + scenario it may account a) the number of pages freed because + of swap slot free notifications or b) the number of pages freed + because of REQ_DISCARD requests sent by bio. The former ones + are sent to a swap block device when a swap slot is freed, which + implies that this disk is being used as a swap disk. The latter + ones are sent by filesystem mounted with discard option, + whenever some data blocks are getting discarded. What: /sys/block/zram<id>/zero_pages Date: August 2010 @@ -119,3 +122,22 @@ efficiency can be calculated using compr_data_size and this statistic. Unit: bytes + +What: /sys/block/zram<id>/mem_used_max +Date: August 2014 +Contact: Minchan Kim <minchan@kernel.org> +Description: + The mem_used_max file is read/write and specifies the amount + of maximum memory zram have consumed to store compressed data. + For resetting the value, you should write "0". Otherwise, + you could see -EINVAL. + Unit: bytes + +What: /sys/block/zram<id>/mem_limit +Date: August 2014 +Contact: Minchan Kim <minchan@kernel.org> +Description: + The mem_limit file is read/write and specifies the maximum + amount of memory ZRAM can use to store the compressed data. The + limit could be changed in run time and "0" means disable the + limit. No limit is the initial state. Unit: bytes
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events index 7b40a3c..20979f8 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
@@ -27,575 +27,62 @@ "basename". -What: /sys/devices/cpu/events/PM_1PLUS_PPC_CMPL - /sys/devices/cpu/events/PM_BRU_FIN - /sys/devices/cpu/events/PM_BR_MPRED - /sys/devices/cpu/events/PM_CMPLU_STALL - /sys/devices/cpu/events/PM_CMPLU_STALL_BRU - /sys/devices/cpu/events/PM_CMPLU_STALL_DCACHE_MISS - /sys/devices/cpu/events/PM_CMPLU_STALL_DFU - /sys/devices/cpu/events/PM_CMPLU_STALL_DIV - /sys/devices/cpu/events/PM_CMPLU_STALL_ERAT_MISS - /sys/devices/cpu/events/PM_CMPLU_STALL_FXU - /sys/devices/cpu/events/PM_CMPLU_STALL_IFU - /sys/devices/cpu/events/PM_CMPLU_STALL_LSU - /sys/devices/cpu/events/PM_CMPLU_STALL_REJECT - /sys/devices/cpu/events/PM_CMPLU_STALL_SCALAR - /sys/devices/cpu/events/PM_CMPLU_STALL_SCALAR_LONG - /sys/devices/cpu/events/PM_CMPLU_STALL_STORE - /sys/devices/cpu/events/PM_CMPLU_STALL_THRD - /sys/devices/cpu/events/PM_CMPLU_STALL_VECTOR - /sys/devices/cpu/events/PM_CMPLU_STALL_VECTOR_LONG - /sys/devices/cpu/events/PM_CYC - /sys/devices/cpu/events/PM_GCT_NOSLOT_BR_MPRED - /sys/devices/cpu/events/PM_GCT_NOSLOT_BR_MPRED_IC_MISS - /sys/devices/cpu/events/PM_GCT_NOSLOT_CYC - /sys/devices/cpu/events/PM_GCT_NOSLOT_IC_MISS - /sys/devices/cpu/events/PM_GRP_CMPL - /sys/devices/cpu/events/PM_INST_CMPL - /sys/devices/cpu/events/PM_LD_MISS_L1 - /sys/devices/cpu/events/PM_LD_REF_L1 - /sys/devices/cpu/events/PM_RUN_CYC - /sys/devices/cpu/events/PM_RUN_INST_CMPL - /sys/devices/cpu/events/PM_IC_DEMAND_L2_BR_ALL - /sys/devices/cpu/events/PM_GCT_UTIL_7_TO_10_SLOTS - /sys/devices/cpu/events/PM_PMC2_SAVED - /sys/devices/cpu/events/PM_VSU0_16FLOP - /sys/devices/cpu/events/PM_MRK_LSU_DERAT_MISS - /sys/devices/cpu/events/PM_MRK_ST_CMPL - /sys/devices/cpu/events/PM_NEST_PAIR3_ADD - /sys/devices/cpu/events/PM_L2_ST_DISP - /sys/devices/cpu/events/PM_L2_CASTOUT_MOD - /sys/devices/cpu/events/PM_ISEG - /sys/devices/cpu/events/PM_MRK_INST_TIMEO - /sys/devices/cpu/events/PM_L2_RCST_DISP_FAIL_ADDR - /sys/devices/cpu/events/PM_LSU1_DC_PREF_STREAM_CONFIRM - /sys/devices/cpu/events/PM_IERAT_WR_64K - /sys/devices/cpu/events/PM_MRK_DTLB_MISS_16M - /sys/devices/cpu/events/PM_IERAT_MISS - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_LMEM - /sys/devices/cpu/events/PM_FLOP - /sys/devices/cpu/events/PM_THRD_PRIO_4_5_CYC - /sys/devices/cpu/events/PM_BR_PRED_TA - /sys/devices/cpu/events/PM_EXT_INT - /sys/devices/cpu/events/PM_VSU_FSQRT_FDIV - /sys/devices/cpu/events/PM_MRK_LD_MISS_EXPOSED_CYC - /sys/devices/cpu/events/PM_LSU1_LDF - /sys/devices/cpu/events/PM_IC_WRITE_ALL - /sys/devices/cpu/events/PM_LSU0_SRQ_STFWD - /sys/devices/cpu/events/PM_PTEG_FROM_RL2L3_MOD - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L31_SHR - /sys/devices/cpu/events/PM_DATA_FROM_L21_MOD - /sys/devices/cpu/events/PM_VSU1_SCAL_DOUBLE_ISSUED - /sys/devices/cpu/events/PM_VSU0_8FLOP - /sys/devices/cpu/events/PM_POWER_EVENT1 - /sys/devices/cpu/events/PM_DISP_CLB_HELD_BAL - /sys/devices/cpu/events/PM_VSU1_2FLOP - /sys/devices/cpu/events/PM_LWSYNC_HELD - /sys/devices/cpu/events/PM_PTEG_FROM_DL2L3_SHR - /sys/devices/cpu/events/PM_INST_FROM_L21_MOD - /sys/devices/cpu/events/PM_IERAT_XLATE_WR_16MPLUS - /sys/devices/cpu/events/PM_IC_REQ_ALL - /sys/devices/cpu/events/PM_DSLB_MISS - /sys/devices/cpu/events/PM_L3_MISS - /sys/devices/cpu/events/PM_LSU0_L1_PREF - /sys/devices/cpu/events/PM_VSU_SCALAR_SINGLE_ISSUED - /sys/devices/cpu/events/PM_LSU1_DC_PREF_STREAM_CONFIRM_STRIDE - /sys/devices/cpu/events/PM_L2_INST - /sys/devices/cpu/events/PM_VSU0_FRSP - /sys/devices/cpu/events/PM_FLUSH_DISP - /sys/devices/cpu/events/PM_PTEG_FROM_L2MISS - /sys/devices/cpu/events/PM_VSU1_DQ_ISSUED - /sys/devices/cpu/events/PM_MRK_DATA_FROM_DMEM - /sys/devices/cpu/events/PM_LSU_FLUSH_ULD - /sys/devices/cpu/events/PM_PTEG_FROM_LMEM - /sys/devices/cpu/events/PM_MRK_DERAT_MISS_16M - /sys/devices/cpu/events/PM_THRD_ALL_RUN_CYC - /sys/devices/cpu/events/PM_MEM0_PREFETCH_DISP - /sys/devices/cpu/events/PM_MRK_STALL_CMPLU_CYC_COUNT - /sys/devices/cpu/events/PM_DATA_FROM_DL2L3_MOD - /sys/devices/cpu/events/PM_VSU_FRSP - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L21_MOD - /sys/devices/cpu/events/PM_PMC1_OVERFLOW - /sys/devices/cpu/events/PM_VSU0_SINGLE - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_L3MISS - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_L31_SHR - /sys/devices/cpu/events/PM_VSU0_VECTOR_SP_ISSUED - /sys/devices/cpu/events/PM_VSU1_FEST - /sys/devices/cpu/events/PM_MRK_INST_DISP - /sys/devices/cpu/events/PM_VSU0_COMPLEX_ISSUED - /sys/devices/cpu/events/PM_LSU1_FLUSH_UST - /sys/devices/cpu/events/PM_FXU_IDLE - /sys/devices/cpu/events/PM_LSU0_FLUSH_ULD - /sys/devices/cpu/events/PM_MRK_DATA_FROM_DL2L3_MOD - /sys/devices/cpu/events/PM_LSU_LMQ_SRQ_EMPTY_ALL_CYC - /sys/devices/cpu/events/PM_LSU1_REJECT_LMQ_FULL - /sys/devices/cpu/events/PM_INST_PTEG_FROM_L21_MOD - /sys/devices/cpu/events/PM_INST_FROM_RL2L3_MOD - /sys/devices/cpu/events/PM_SHL_CREATED - /sys/devices/cpu/events/PM_L2_ST_HIT - /sys/devices/cpu/events/PM_DATA_FROM_DMEM - /sys/devices/cpu/events/PM_L3_LD_MISS - /sys/devices/cpu/events/PM_FXU1_BUSY_FXU0_IDLE - /sys/devices/cpu/events/PM_DISP_CLB_HELD_RES - /sys/devices/cpu/events/PM_L2_SN_SX_I_DONE - /sys/devices/cpu/events/PM_STCX_CMPL - /sys/devices/cpu/events/PM_VSU0_2FLOP - /sys/devices/cpu/events/PM_L3_PREF_MISS - /sys/devices/cpu/events/PM_LSU_SRQ_SYNC_CYC - /sys/devices/cpu/events/PM_LSU_REJECT_ERAT_MISS - /sys/devices/cpu/events/PM_L1_ICACHE_MISS - /sys/devices/cpu/events/PM_LSU1_FLUSH_SRQ - /sys/devices/cpu/events/PM_LD_REF_L1_LSU0 - /sys/devices/cpu/events/PM_VSU0_FEST - /sys/devices/cpu/events/PM_VSU_VECTOR_SINGLE_ISSUED - /sys/devices/cpu/events/PM_FREQ_UP - /sys/devices/cpu/events/PM_DATA_FROM_LMEM - /sys/devices/cpu/events/PM_LSU1_LDX - /sys/devices/cpu/events/PM_PMC3_OVERFLOW - /sys/devices/cpu/events/PM_MRK_BR_MPRED - /sys/devices/cpu/events/PM_SHL_MATCH - /sys/devices/cpu/events/PM_MRK_BR_TAKEN - /sys/devices/cpu/events/PM_ISLB_MISS - /sys/devices/cpu/events/PM_DISP_HELD_THERMAL - /sys/devices/cpu/events/PM_INST_PTEG_FROM_RL2L3_SHR - /sys/devices/cpu/events/PM_LSU1_SRQ_STFWD - /sys/devices/cpu/events/PM_PTEG_FROM_DMEM - /sys/devices/cpu/events/PM_VSU_2FLOP - /sys/devices/cpu/events/PM_GCT_FULL_CYC - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L3_CYC - /sys/devices/cpu/events/PM_LSU_SRQ_S0_ALLOC - /sys/devices/cpu/events/PM_MRK_DERAT_MISS_4K - /sys/devices/cpu/events/PM_BR_MPRED_TA - /sys/devices/cpu/events/PM_INST_PTEG_FROM_L2MISS - /sys/devices/cpu/events/PM_DPU_HELD_POWER - /sys/devices/cpu/events/PM_MRK_VSU_FIN - /sys/devices/cpu/events/PM_LSU_SRQ_S0_VALID - /sys/devices/cpu/events/PM_GCT_EMPTY_CYC - /sys/devices/cpu/events/PM_IOPS_DISP - /sys/devices/cpu/events/PM_RUN_SPURR - /sys/devices/cpu/events/PM_PTEG_FROM_L21_MOD - /sys/devices/cpu/events/PM_VSU0_1FLOP - /sys/devices/cpu/events/PM_SNOOP_TLBIE - /sys/devices/cpu/events/PM_DATA_FROM_L3MISS - /sys/devices/cpu/events/PM_VSU_SINGLE - /sys/devices/cpu/events/PM_DTLB_MISS_16G - /sys/devices/cpu/events/PM_FLUSH - /sys/devices/cpu/events/PM_L2_LD_HIT - /sys/devices/cpu/events/PM_NEST_PAIR2_AND - /sys/devices/cpu/events/PM_VSU1_1FLOP - /sys/devices/cpu/events/PM_IC_PREF_REQ - /sys/devices/cpu/events/PM_L3_LD_HIT - /sys/devices/cpu/events/PM_DISP_HELD - /sys/devices/cpu/events/PM_L2_LD - /sys/devices/cpu/events/PM_LSU_FLUSH_SRQ - /sys/devices/cpu/events/PM_BC_PLUS_8_CONV - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L31_MOD_CYC - /sys/devices/cpu/events/PM_L2_RCST_BUSY_RC_FULL - /sys/devices/cpu/events/PM_TB_BIT_TRANS - /sys/devices/cpu/events/PM_THERMAL_MAX - /sys/devices/cpu/events/PM_LSU1_FLUSH_ULD - /sys/devices/cpu/events/PM_LSU1_REJECT_LHS - /sys/devices/cpu/events/PM_LSU_LRQ_S0_ALLOC - /sys/devices/cpu/events/PM_L3_CO_L31 - /sys/devices/cpu/events/PM_POWER_EVENT4 - /sys/devices/cpu/events/PM_DATA_FROM_L31_SHR - /sys/devices/cpu/events/PM_BR_UNCOND - /sys/devices/cpu/events/PM_LSU1_DC_PREF_STREAM_ALLOC - /sys/devices/cpu/events/PM_PMC4_REWIND - /sys/devices/cpu/events/PM_L2_RCLD_DISP - /sys/devices/cpu/events/PM_THRD_PRIO_2_3_CYC - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_L2MISS - /sys/devices/cpu/events/PM_IC_DEMAND_L2_BHT_REDIRECT - /sys/devices/cpu/events/PM_DATA_FROM_L31_SHR - /sys/devices/cpu/events/PM_IC_PREF_CANCEL_L2 - /sys/devices/cpu/events/PM_MRK_FIN_STALL_CYC_COUNT - /sys/devices/cpu/events/PM_BR_PRED_CCACHE - /sys/devices/cpu/events/PM_GCT_UTIL_1_TO_2_SLOTS - /sys/devices/cpu/events/PM_MRK_ST_CMPL_INT - /sys/devices/cpu/events/PM_LSU_TWO_TABLEWALK_CYC - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L3MISS - /sys/devices/cpu/events/PM_LSU_SET_MPRED - /sys/devices/cpu/events/PM_FLUSH_DISP_TLBIE - /sys/devices/cpu/events/PM_VSU1_FCONV - /sys/devices/cpu/events/PM_DERAT_MISS_16G - /sys/devices/cpu/events/PM_INST_FROM_LMEM - /sys/devices/cpu/events/PM_IC_DEMAND_L2_BR_REDIRECT - /sys/devices/cpu/events/PM_INST_PTEG_FROM_L2 - /sys/devices/cpu/events/PM_PTEG_FROM_L2 - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L21_SHR_CYC - /sys/devices/cpu/events/PM_MRK_DTLB_MISS_4K - /sys/devices/cpu/events/PM_VSU0_FPSCR - /sys/devices/cpu/events/PM_VSU1_VECT_DOUBLE_ISSUED - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_RL2L3_MOD - /sys/devices/cpu/events/PM_MEM0_RQ_DISP - /sys/devices/cpu/events/PM_L2_LD_MISS - /sys/devices/cpu/events/PM_VMX_RESULT_SAT_1 - /sys/devices/cpu/events/PM_L1_PREF - /sys/devices/cpu/events/PM_MRK_DATA_FROM_LMEM_CYC - /sys/devices/cpu/events/PM_GRP_IC_MISS_NONSPEC - /sys/devices/cpu/events/PM_PB_NODE_PUMP - /sys/devices/cpu/events/PM_SHL_MERGED - /sys/devices/cpu/events/PM_NEST_PAIR1_ADD - /sys/devices/cpu/events/PM_DATA_FROM_L3 - /sys/devices/cpu/events/PM_LSU_FLUSH - /sys/devices/cpu/events/PM_LSU_SRQ_SYNC_COUNT - /sys/devices/cpu/events/PM_PMC2_OVERFLOW - /sys/devices/cpu/events/PM_LSU_LDF - /sys/devices/cpu/events/PM_POWER_EVENT3 - /sys/devices/cpu/events/PM_DISP_WT - /sys/devices/cpu/events/PM_IC_BANK_CONFLICT - /sys/devices/cpu/events/PM_BR_MPRED_CR_TA - /sys/devices/cpu/events/PM_L2_INST_MISS - /sys/devices/cpu/events/PM_NEST_PAIR2_ADD - /sys/devices/cpu/events/PM_MRK_LSU_FLUSH - /sys/devices/cpu/events/PM_L2_LDST - /sys/devices/cpu/events/PM_INST_FROM_L31_SHR - /sys/devices/cpu/events/PM_VSU0_FIN - /sys/devices/cpu/events/PM_VSU1_FCONV - /sys/devices/cpu/events/PM_INST_FROM_RMEM - /sys/devices/cpu/events/PM_DISP_CLB_HELD_TLBIE - /sys/devices/cpu/events/PM_MRK_DATA_FROM_DMEM_CYC - /sys/devices/cpu/events/PM_BR_PRED_CR - /sys/devices/cpu/events/PM_LSU_REJECT - /sys/devices/cpu/events/PM_GCT_UTIL_3_TO_6_SLOTS - /sys/devices/cpu/events/PM_CMPLU_STALL_END_GCT_NOSLOT - /sys/devices/cpu/events/PM_LSU0_REJECT_LMQ_FULL - /sys/devices/cpu/events/PM_VSU_FEST - /sys/devices/cpu/events/PM_NEST_PAIR0_AND - /sys/devices/cpu/events/PM_PTEG_FROM_L3 - /sys/devices/cpu/events/PM_POWER_EVENT2 - /sys/devices/cpu/events/PM_IC_PREF_CANCEL_PAGE - /sys/devices/cpu/events/PM_VSU0_FSQRT_FDIV - /sys/devices/cpu/events/PM_MRK_GRP_CMPL - /sys/devices/cpu/events/PM_VSU0_SCAL_DOUBLE_ISSUED - /sys/devices/cpu/events/PM_GRP_DISP - /sys/devices/cpu/events/PM_LSU0_LDX - /sys/devices/cpu/events/PM_DATA_FROM_L2 - /sys/devices/cpu/events/PM_MRK_DATA_FROM_RL2L3_MOD - /sys/devices/cpu/events/PM_VSU0_VECT_DOUBLE_ISSUED - /sys/devices/cpu/events/PM_VSU1_2FLOP_DOUBLE - /sys/devices/cpu/events/PM_THRD_PRIO_6_7_CYC - /sys/devices/cpu/events/PM_BC_PLUS_8_RSLV_TAKEN - /sys/devices/cpu/events/PM_BR_MPRED_CR - /sys/devices/cpu/events/PM_L3_CO_MEM - /sys/devices/cpu/events/PM_DATA_FROM_RL2L3_MOD - /sys/devices/cpu/events/PM_LSU_SRQ_FULL_CYC - /sys/devices/cpu/events/PM_TABLEWALK_CYC - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_RMEM - /sys/devices/cpu/events/PM_LSU_SRQ_STFWD - /sys/devices/cpu/events/PM_INST_PTEG_FROM_RMEM - /sys/devices/cpu/events/PM_FXU0_FIN - /sys/devices/cpu/events/PM_LSU1_L1_SW_PREF - /sys/devices/cpu/events/PM_PTEG_FROM_L31_MOD - /sys/devices/cpu/events/PM_PMC5_OVERFLOW - /sys/devices/cpu/events/PM_LD_REF_L1_LSU1 - /sys/devices/cpu/events/PM_INST_PTEG_FROM_L21_SHR - /sys/devices/cpu/events/PM_DATA_FROM_RMEM - /sys/devices/cpu/events/PM_VSU0_SCAL_SINGLE_ISSUED - /sys/devices/cpu/events/PM_BR_MPRED_LSTACK - /sys/devices/cpu/events/PM_MRK_DATA_FROM_RL2L3_MOD_CYC - /sys/devices/cpu/events/PM_LSU0_FLUSH_UST - /sys/devices/cpu/events/PM_LSU_NCST - /sys/devices/cpu/events/PM_BR_TAKEN - /sys/devices/cpu/events/PM_INST_PTEG_FROM_LMEM - /sys/devices/cpu/events/PM_DTLB_MISS_4K - /sys/devices/cpu/events/PM_PMC4_SAVED - /sys/devices/cpu/events/PM_VSU1_PERMUTE_ISSUED - /sys/devices/cpu/events/PM_SLB_MISS - /sys/devices/cpu/events/PM_LSU1_FLUSH_LRQ - /sys/devices/cpu/events/PM_DTLB_MISS - /sys/devices/cpu/events/PM_VSU1_FRSP - /sys/devices/cpu/events/PM_VSU_VECTOR_DOUBLE_ISSUED - /sys/devices/cpu/events/PM_L2_CASTOUT_SHR - /sys/devices/cpu/events/PM_DATA_FROM_DL2L3_SHR - /sys/devices/cpu/events/PM_VSU1_STF - /sys/devices/cpu/events/PM_ST_FIN - /sys/devices/cpu/events/PM_PTEG_FROM_L21_SHR - /sys/devices/cpu/events/PM_L2_LOC_GUESS_WRONG - /sys/devices/cpu/events/PM_MRK_STCX_FAIL - /sys/devices/cpu/events/PM_LSU0_REJECT_LHS - /sys/devices/cpu/events/PM_IC_PREF_CANCEL_HIT - /sys/devices/cpu/events/PM_L3_PREF_BUSY - /sys/devices/cpu/events/PM_MRK_BRU_FIN - /sys/devices/cpu/events/PM_LSU1_NCLD - /sys/devices/cpu/events/PM_INST_PTEG_FROM_L31_MOD - /sys/devices/cpu/events/PM_LSU_NCLD - /sys/devices/cpu/events/PM_LSU_LDX - /sys/devices/cpu/events/PM_L2_LOC_GUESS_CORRECT - /sys/devices/cpu/events/PM_THRESH_TIMEO - /sys/devices/cpu/events/PM_L3_PREF_ST - /sys/devices/cpu/events/PM_DISP_CLB_HELD_SYNC - /sys/devices/cpu/events/PM_VSU_SIMPLE_ISSUED - /sys/devices/cpu/events/PM_VSU1_SINGLE - /sys/devices/cpu/events/PM_DATA_TABLEWALK_CYC - /sys/devices/cpu/events/PM_L2_RC_ST_DONE - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_L21_MOD - /sys/devices/cpu/events/PM_LARX_LSU1 - /sys/devices/cpu/events/PM_MRK_DATA_FROM_RMEM - /sys/devices/cpu/events/PM_DISP_CLB_HELD - /sys/devices/cpu/events/PM_DERAT_MISS_4K - /sys/devices/cpu/events/PM_L2_RCLD_DISP_FAIL_ADDR - /sys/devices/cpu/events/PM_SEG_EXCEPTION - /sys/devices/cpu/events/PM_FLUSH_DISP_SB - /sys/devices/cpu/events/PM_L2_DC_INV - /sys/devices/cpu/events/PM_PTEG_FROM_DL2L3_MOD - /sys/devices/cpu/events/PM_DSEG - /sys/devices/cpu/events/PM_BR_PRED_LSTACK - /sys/devices/cpu/events/PM_VSU0_STF - /sys/devices/cpu/events/PM_LSU_FX_FIN - /sys/devices/cpu/events/PM_DERAT_MISS_16M - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_DL2L3_MOD - /sys/devices/cpu/events/PM_GCT_UTIL_11_PLUS_SLOTS - /sys/devices/cpu/events/PM_INST_FROM_L3 - /sys/devices/cpu/events/PM_MRK_IFU_FIN - /sys/devices/cpu/events/PM_ITLB_MISS - /sys/devices/cpu/events/PM_VSU_STF - /sys/devices/cpu/events/PM_LSU_FLUSH_UST - /sys/devices/cpu/events/PM_L2_LDST_MISS - /sys/devices/cpu/events/PM_FXU1_FIN - /sys/devices/cpu/events/PM_SHL_DEALLOCATED - /sys/devices/cpu/events/PM_L2_SN_M_WR_DONE - /sys/devices/cpu/events/PM_LSU_REJECT_SET_MPRED - /sys/devices/cpu/events/PM_L3_PREF_LD - /sys/devices/cpu/events/PM_L2_SN_M_RD_DONE - /sys/devices/cpu/events/PM_MRK_DERAT_MISS_16G - /sys/devices/cpu/events/PM_VSU_FCONV - /sys/devices/cpu/events/PM_ANY_THRD_RUN_CYC - /sys/devices/cpu/events/PM_LSU_LMQ_FULL_CYC - /sys/devices/cpu/events/PM_MRK_LSU_REJECT_LHS - /sys/devices/cpu/events/PM_MRK_LD_MISS_L1_CYC - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L2_CYC - /sys/devices/cpu/events/PM_INST_IMC_MATCH_DISP - /sys/devices/cpu/events/PM_MRK_DATA_FROM_RMEM_CYC - /sys/devices/cpu/events/PM_VSU0_SIMPLE_ISSUED - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_RL2L3_SHR - /sys/devices/cpu/events/PM_VSU_FMA_DOUBLE - /sys/devices/cpu/events/PM_VSU_4FLOP - /sys/devices/cpu/events/PM_VSU1_FIN - /sys/devices/cpu/events/PM_NEST_PAIR1_AND - /sys/devices/cpu/events/PM_INST_PTEG_FROM_RL2L3_MOD - /sys/devices/cpu/events/PM_PTEG_FROM_RMEM - /sys/devices/cpu/events/PM_LSU_LRQ_S0_VALID - /sys/devices/cpu/events/PM_LSU0_LDF - /sys/devices/cpu/events/PM_FLUSH_COMPLETION - /sys/devices/cpu/events/PM_ST_MISS_L1 - /sys/devices/cpu/events/PM_L2_NODE_PUMP - /sys/devices/cpu/events/PM_INST_FROM_DL2L3_SHR - /sys/devices/cpu/events/PM_MRK_STALL_CMPLU_CYC - /sys/devices/cpu/events/PM_VSU1_DENORM - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L31_SHR_CYC - /sys/devices/cpu/events/PM_NEST_PAIR0_ADD - /sys/devices/cpu/events/PM_INST_FROM_L3MISS - /sys/devices/cpu/events/PM_EE_OFF_EXT_INT - /sys/devices/cpu/events/PM_INST_PTEG_FROM_DMEM - /sys/devices/cpu/events/PM_INST_FROM_DL2L3_MOD - /sys/devices/cpu/events/PM_PMC6_OVERFLOW - /sys/devices/cpu/events/PM_VSU_2FLOP_DOUBLE - /sys/devices/cpu/events/PM_TLB_MISS - /sys/devices/cpu/events/PM_FXU_BUSY - /sys/devices/cpu/events/PM_L2_RCLD_DISP_FAIL_OTHER - /sys/devices/cpu/events/PM_LSU_REJECT_LMQ_FULL - /sys/devices/cpu/events/PM_IC_RELOAD_SHR - /sys/devices/cpu/events/PM_GRP_MRK - /sys/devices/cpu/events/PM_MRK_ST_NEST - /sys/devices/cpu/events/PM_VSU1_FSQRT_FDIV - /sys/devices/cpu/events/PM_LSU0_FLUSH_LRQ - /sys/devices/cpu/events/PM_LARX_LSU0 - /sys/devices/cpu/events/PM_IBUF_FULL_CYC - /sys/devices/cpu/events/PM_MRK_DATA_FROM_DL2L3_SHR_CYC - /sys/devices/cpu/events/PM_LSU_DC_PREF_STREAM_ALLOC - /sys/devices/cpu/events/PM_GRP_MRK_CYC - /sys/devices/cpu/events/PM_MRK_DATA_FROM_RL2L3_SHR_CYC - /sys/devices/cpu/events/PM_L2_GLOB_GUESS_CORRECT - /sys/devices/cpu/events/PM_LSU_REJECT_LHS - /sys/devices/cpu/events/PM_MRK_DATA_FROM_LMEM - /sys/devices/cpu/events/PM_INST_PTEG_FROM_L3 - /sys/devices/cpu/events/PM_FREQ_DOWN - /sys/devices/cpu/events/PM_PB_RETRY_NODE_PUMP - /sys/devices/cpu/events/PM_INST_FROM_RL2L3_SHR - /sys/devices/cpu/events/PM_MRK_INST_ISSUED - /sys/devices/cpu/events/PM_PTEG_FROM_L3MISS - /sys/devices/cpu/events/PM_RUN_PURR - /sys/devices/cpu/events/PM_MRK_GRP_IC_MISS - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L3 - /sys/devices/cpu/events/PM_PTEG_FROM_RL2L3_SHR - /sys/devices/cpu/events/PM_LSU_FLUSH_LRQ - /sys/devices/cpu/events/PM_MRK_DERAT_MISS_64K - /sys/devices/cpu/events/PM_INST_PTEG_FROM_DL2L3_MOD - /sys/devices/cpu/events/PM_L2_ST_MISS - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_L21_SHR - /sys/devices/cpu/events/PM_LWSYNC - /sys/devices/cpu/events/PM_LSU0_DC_PREF_STREAM_CONFIRM_STRIDE - /sys/devices/cpu/events/PM_MRK_LSU_FLUSH_LRQ - /sys/devices/cpu/events/PM_INST_IMC_MATCH_CMPL - /sys/devices/cpu/events/PM_NEST_PAIR3_AND - /sys/devices/cpu/events/PM_PB_RETRY_SYS_PUMP - /sys/devices/cpu/events/PM_MRK_INST_FIN - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_DL2L3_SHR - /sys/devices/cpu/events/PM_INST_FROM_L31_MOD - /sys/devices/cpu/events/PM_MRK_DTLB_MISS_64K - /sys/devices/cpu/events/PM_LSU_FIN - /sys/devices/cpu/events/PM_MRK_LSU_REJECT - /sys/devices/cpu/events/PM_L2_CO_FAIL_BUSY - /sys/devices/cpu/events/PM_MEM0_WQ_DISP - /sys/devices/cpu/events/PM_DATA_FROM_L31_MOD - /sys/devices/cpu/events/PM_THERMAL_WARN - /sys/devices/cpu/events/PM_VSU0_4FLOP - /sys/devices/cpu/events/PM_BR_MPRED_CCACHE - /sys/devices/cpu/events/PM_L1_DEMAND_WRITE - /sys/devices/cpu/events/PM_FLUSH_BR_MPRED - /sys/devices/cpu/events/PM_MRK_DTLB_MISS_16G - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_DMEM - /sys/devices/cpu/events/PM_L2_RCST_DISP - /sys/devices/cpu/events/PM_LSU_PARTIAL_CDF - /sys/devices/cpu/events/PM_DISP_CLB_HELD_SB - /sys/devices/cpu/events/PM_VSU0_FMA_DOUBLE - /sys/devices/cpu/events/PM_FXU0_BUSY_FXU1_IDLE - /sys/devices/cpu/events/PM_IC_DEMAND_CYC - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L21_SHR - /sys/devices/cpu/events/PM_MRK_LSU_FLUSH_UST - /sys/devices/cpu/events/PM_INST_PTEG_FROM_L3MISS - /sys/devices/cpu/events/PM_VSU_DENORM - /sys/devices/cpu/events/PM_MRK_LSU_PARTIAL_CDF - /sys/devices/cpu/events/PM_INST_FROM_L21_SHR - /sys/devices/cpu/events/PM_IC_PREF_WRITE - /sys/devices/cpu/events/PM_BR_PRED - /sys/devices/cpu/events/PM_INST_FROM_DMEM - /sys/devices/cpu/events/PM_IC_PREF_CANCEL_ALL - /sys/devices/cpu/events/PM_LSU_DC_PREF_STREAM_CONFIRM - /sys/devices/cpu/events/PM_MRK_LSU_FLUSH_SRQ - /sys/devices/cpu/events/PM_MRK_FIN_STALL_CYC - /sys/devices/cpu/events/PM_L2_RCST_DISP_FAIL_OTHER - /sys/devices/cpu/events/PM_VSU1_DD_ISSUED - /sys/devices/cpu/events/PM_PTEG_FROM_L31_SHR - /sys/devices/cpu/events/PM_DATA_FROM_L21_SHR - /sys/devices/cpu/events/PM_LSU0_NCLD - /sys/devices/cpu/events/PM_VSU1_4FLOP - /sys/devices/cpu/events/PM_VSU1_8FLOP - /sys/devices/cpu/events/PM_VSU_8FLOP - /sys/devices/cpu/events/PM_LSU_LMQ_SRQ_EMPTY_CYC - /sys/devices/cpu/events/PM_DTLB_MISS_64K - /sys/devices/cpu/events/PM_THRD_CONC_RUN_INST - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_L2 - /sys/devices/cpu/events/PM_PB_SYS_PUMP - /sys/devices/cpu/events/PM_VSU_FIN - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L31_MOD - /sys/devices/cpu/events/PM_THRD_PRIO_0_1_CYC - /sys/devices/cpu/events/PM_DERAT_MISS_64K - /sys/devices/cpu/events/PM_PMC2_REWIND - /sys/devices/cpu/events/PM_INST_FROM_L2 - /sys/devices/cpu/events/PM_GRP_BR_MPRED_NONSPEC - /sys/devices/cpu/events/PM_INST_DISP - /sys/devices/cpu/events/PM_MEM0_RD_CANCEL_TOTAL - /sys/devices/cpu/events/PM_LSU0_DC_PREF_STREAM_CONFIRM - /sys/devices/cpu/events/PM_L1_DCACHE_RELOAD_VALID - /sys/devices/cpu/events/PM_VSU_SCALAR_DOUBLE_ISSUED - /sys/devices/cpu/events/PM_L3_PREF_HIT - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_L31_MOD - /sys/devices/cpu/events/PM_MRK_FXU_FIN - /sys/devices/cpu/events/PM_PMC4_OVERFLOW - /sys/devices/cpu/events/PM_MRK_PTEG_FROM_L3 - /sys/devices/cpu/events/PM_LSU0_LMQ_LHR_MERGE - /sys/devices/cpu/events/PM_BTAC_HIT - /sys/devices/cpu/events/PM_L3_RD_BUSY - /sys/devices/cpu/events/PM_LSU0_L1_SW_PREF - /sys/devices/cpu/events/PM_INST_FROM_L2MISS - /sys/devices/cpu/events/PM_LSU0_DC_PREF_STREAM_ALLOC - /sys/devices/cpu/events/PM_L2_ST - /sys/devices/cpu/events/PM_VSU0_DENORM - /sys/devices/cpu/events/PM_MRK_DATA_FROM_DL2L3_SHR - /sys/devices/cpu/events/PM_BR_PRED_CR_TA - /sys/devices/cpu/events/PM_VSU0_FCONV - /sys/devices/cpu/events/PM_MRK_LSU_FLUSH_ULD - /sys/devices/cpu/events/PM_BTAC_MISS - /sys/devices/cpu/events/PM_MRK_LD_MISS_EXPOSED_CYC_COUNT - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L2 - /sys/devices/cpu/events/PM_LSU_DCACHE_RELOAD_VALID - /sys/devices/cpu/events/PM_VSU_FMA - /sys/devices/cpu/events/PM_LSU0_FLUSH_SRQ - /sys/devices/cpu/events/PM_LSU1_L1_PREF - /sys/devices/cpu/events/PM_IOPS_CMPL - /sys/devices/cpu/events/PM_L2_SYS_PUMP - /sys/devices/cpu/events/PM_L2_RCLD_BUSY_RC_FULL - /sys/devices/cpu/events/PM_LSU_LMQ_S0_ALLOC - /sys/devices/cpu/events/PM_FLUSH_DISP_SYNC - /sys/devices/cpu/events/PM_MRK_DATA_FROM_DL2L3_MOD_CYC - /sys/devices/cpu/events/PM_L2_IC_INV - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L21_MOD_CYC - /sys/devices/cpu/events/PM_L3_PREF_LDST - /sys/devices/cpu/events/PM_LSU_SRQ_EMPTY_CYC - /sys/devices/cpu/events/PM_LSU_LMQ_S0_VALID - /sys/devices/cpu/events/PM_FLUSH_PARTIAL - /sys/devices/cpu/events/PM_VSU1_FMA_DOUBLE - /sys/devices/cpu/events/PM_1PLUS_PPC_DISP - /sys/devices/cpu/events/PM_DATA_FROM_L2MISS - /sys/devices/cpu/events/PM_SUSPENDED - /sys/devices/cpu/events/PM_VSU0_FMA - /sys/devices/cpu/events/PM_STCX_FAIL - /sys/devices/cpu/events/PM_VSU0_FSQRT_FDIV_DOUBLE - /sys/devices/cpu/events/PM_DC_PREF_DST - /sys/devices/cpu/events/PM_VSU1_SCAL_SINGLE_ISSUED - /sys/devices/cpu/events/PM_L3_HIT - /sys/devices/cpu/events/PM_L2_GLOB_GUESS_WRONG - /sys/devices/cpu/events/PM_MRK_DFU_FIN - /sys/devices/cpu/events/PM_INST_FROM_L1 - /sys/devices/cpu/events/PM_IC_DEMAND_REQ - /sys/devices/cpu/events/PM_VSU1_FSQRT_FDIV_DOUBLE - /sys/devices/cpu/events/PM_VSU1_FMA - /sys/devices/cpu/events/PM_MRK_LD_MISS_L1 - /sys/devices/cpu/events/PM_VSU0_2FLOP_DOUBLE - /sys/devices/cpu/events/PM_LSU_DC_PREF_STRIDED_STREAM_CONFIRM - /sys/devices/cpu/events/PM_INST_PTEG_FROM_L31_SHR - /sys/devices/cpu/events/PM_MRK_LSU_REJECT_ERAT_MISS - /sys/devices/cpu/events/PM_MRK_DATA_FROM_L2MISS - /sys/devices/cpu/events/PM_DATA_FROM_RL2L3_SHR - /sys/devices/cpu/events/PM_INST_FROM_PREF - /sys/devices/cpu/events/PM_VSU1_SQ - /sys/devices/cpu/events/PM_L2_LD_DISP - /sys/devices/cpu/events/PM_L2_DISP_ALL - /sys/devices/cpu/events/PM_THRD_GRP_CMPL_BOTH_CYC - /sys/devices/cpu/events/PM_VSU_FSQRT_FDIV_DOUBLE - /sys/devices/cpu/events/PM_INST_PTEG_FROM_DL2L3_SHR - /sys/devices/cpu/events/PM_VSU_1FLOP - /sys/devices/cpu/events/PM_HV_CYC - /sys/devices/cpu/events/PM_MRK_LSU_FIN - /sys/devices/cpu/events/PM_MRK_DATA_FROM_RL2L3_SHR - /sys/devices/cpu/events/PM_DTLB_MISS_16M - /sys/devices/cpu/events/PM_LSU1_LMQ_LHR_MERGE - /sys/devices/cpu/events/PM_IFU_FIN - /sys/devices/cpu/events/PM_1THRD_CON_RUN_INSTR - /sys/devices/cpu/events/PM_CMPLU_STALL_COUNT - /sys/devices/cpu/events/PM_MEM0_PB_RD_CL - /sys/devices/cpu/events/PM_THRD_1_RUN_CYC - /sys/devices/cpu/events/PM_THRD_2_CONC_RUN_INSTR - /sys/devices/cpu/events/PM_THRD_2_RUN_CYC - /sys/devices/cpu/events/PM_THRD_3_CONC_RUN_INST - /sys/devices/cpu/events/PM_THRD_3_RUN_CYC - /sys/devices/cpu/events/PM_THRD_4_CONC_RUN_INST - /sys/devices/cpu/events/PM_THRD_4_RUN_CYC - -Date: 2013/01/08 - +What: /sys/bus/event_source/devices/<pmu>/events/<event> +Date: 2014/02/24 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> - Linux Powerpc mailing list <linuxppc-dev@ozlabs.org> +Description: Per-pmu performance monitoring events specific to the running system -Description: POWER-systems specific performance monitoring events + Each file (except for some of those with a '.' in them, '.unit' + and '.scale') in the 'events' directory describes a single + performance monitoring event supported by the <pmu>. The name + of the file is the name of the event. - A collection of performance monitoring events that may be - supported by the POWER CPU. These events can be monitored - using the 'perf(1)' tool. + File contents: - These events may not be supported by other CPUs. + <term>[=<value>][,<term>[=<value>]]... - The contents of each file would look like: + Where <term> is one of the terms listed under + /sys/bus/event_source/devices/<pmu>/format/ and <value> is + a number is base-16 format with a '0x' prefix (lowercase only). + If a <term> is specified alone (without an assigned value), it + is implied that 0x1 is assigned to that <term>. - event=0xNNNN + Examples (each of these lines would be in a seperate file): - where 'N' is a hex digit and the number '0xNNNN' shows the - "raw code" for the perf event identified by the file's - "basename". + event=0x2abc + event=0x423,inv,cmask=0x3 + domain=0x1,offset=0x8,starting_index=0xffff - Further, multiple terms like 'event=0xNNNN' can be specified - and separated with comma. All available terms are defined in - the /sys/bus/event_source/devices/<dev>/format file. + Each of the assignments indicates a value to be assigned to a + particular set of bits (as defined by the format file + corresponding to the <term>) in the perf_event structure passed + to the perf_open syscall. + +What: /sys/bus/event_source/devices/<pmu>/events/<event>.unit +Date: 2014/02/24 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> +Description: Perf event units + + A string specifying the English plural numerical unit that <event> + (once multiplied by <event>.scale) represents. + + Example: + + Joules + +What: /sys/bus/event_source/devices/<pmu>/events/<event>.scale +Date: 2014/02/24 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> +Description: Perf event scaling factors + + A string representing a floating point value expressed in + scientific notation to be multiplied by the event count + recieved from the kernel to match the unit specified in the + <event>.unit file. + + Example: + + 2.3283064365386962890625e-10 + + This is provided to avoid performing floating point arithmetic + in the kernel.
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index e78ee79..32f3f5f 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7
@@ -1,6 +1,6 @@ What: /sys/bus/event_source/devices/hv_24x7/interface/catalog Date: February 2014 -Contact: Cody P Schafer <cody@linux.vnet.ibm.com> +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: Provides access to the binary "24x7 catalog" provided by the hypervisor on POWER7 and 8 systems. This catalog lists events @@ -10,14 +10,14 @@ What: /sys/bus/event_source/devices/hv_24x7/interface/catalog_length Date: February 2014 -Contact: Cody P Schafer <cody@linux.vnet.ibm.com> +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: A number equal to the length in bytes of the catalog. This is also extractable from the provided binary "catalog" sysfs entry. What: /sys/bus/event_source/devices/hv_24x7/interface/catalog_version Date: February 2014 -Contact: Cody P Schafer <cody@linux.vnet.ibm.com> +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: Exposes the "version" field of the 24x7 catalog. This is also extractable from the provided binary "catalog" sysfs entry.
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci index 3fa58c2..3ca4e55 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci
@@ -1,6 +1,6 @@ What: /sys/bus/event_source/devices/hv_gpci/interface/collect_privileged Date: February 2014 -Contact: Cody P Schafer <cody@linux.vnet.ibm.com> +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: '0' if the hypervisor is configured to forbid access to event counters being accumulated by other guests and to physical @@ -9,35 +9,35 @@ What: /sys/bus/event_source/devices/hv_gpci/interface/ga Date: February 2014 -Contact: Cody P Schafer <cody@linux.vnet.ibm.com> +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: 0 or 1. Indicates whether we have access to "GA" events (listed in arch/powerpc/perf/hv-gpci.h). What: /sys/bus/event_source/devices/hv_gpci/interface/expanded Date: February 2014 -Contact: Cody P Schafer <cody@linux.vnet.ibm.com> +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: 0 or 1. Indicates whether we have access to "EXPANDED" events (listed in arch/powerpc/perf/hv-gpci.h). What: /sys/bus/event_source/devices/hv_gpci/interface/lab Date: February 2014 -Contact: Cody P Schafer <cody@linux.vnet.ibm.com> +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: 0 or 1. Indicates whether we have access to "LAB" events (listed in arch/powerpc/perf/hv-gpci.h). What: /sys/bus/event_source/devices/hv_gpci/interface/version Date: February 2014 -Contact: Cody P Schafer <cody@linux.vnet.ibm.com> +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: A number indicating the version of the gpci interface that the hypervisor reports supporting. What: /sys/bus/event_source/devices/hv_gpci/interface/kernel_version Date: February 2014 -Contact: Cody P Schafer <cody@linux.vnet.ibm.com> +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: A number indicating the latest version of the gpci interface that the kernel is aware of.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150 b/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150 new file mode 100644 index 0000000..99847a9 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150
@@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/triggerX/name = "bmc150_accel-any-motion-devX" +KernelVersion: 3.17 +Contact: linux-iio@vger.kernel.org +Description: + The BMC150 accelerometer kernel module provides an additional trigger, + which sets driver in a mode, where data is pushed to the buffer + only when there is any motion.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-gyro-bmg160 b/Documentation/ABI/testing/sysfs-bus-iio-gyro-bmg160 new file mode 100644 index 0000000..e98209c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-gyro-bmg160
@@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/triggerX/name = "bmg160-any-motion-devX" +KernelVersion: 3.17 +Contact: linux-iio@vger.kernel.org +Description: + The BMG160 gyro kernel module provides an additional trigger, + which sets driver in a mode, where data is pushed to the buffer + only when there is any motion.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 6615fda..ee6c040 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -65,6 +65,16 @@ force a rescan of all PCI buses in the system, and re-discover previously removed devices. +What: /sys/bus/pci/devices/.../msi_bus +Date: September 2014 +Contact: Linux PCI developers <linux-pci@vger.kernel.org> +Description: + Writing a zero value to this attribute disallows MSI and + MSI-X for any future drivers of the device. If the device + is a bridge, MSI and MSI-X will be disallowed for future + drivers of all child devices under the bridge. Drivers + must be reloaded for the new setting to take effect. + What: /sys/bus/pci/devices/.../msi_irqs/ Date: September, 2011 Contact: Neil Horman <nhorman@tuxdriver.com>
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl new file mode 100644 index 0000000..554405e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -0,0 +1,129 @@ +Slave contexts (eg. /sys/class/cxl/afu0.0s): + +What: /sys/class/cxl/<afu>/irqs_max +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + Decimal value of maximum number of interrupts that can be + requested by userspace. The default on probe is the maximum + that hardware can support (eg. 2037). Write values will limit + userspace applications to that many userspace interrupts. Must + be >= irqs_min. + +What: /sys/class/cxl/<afu>/irqs_min +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the minimum number of interrupts that + userspace must request on a CXL_START_WORK ioctl. Userspace may + omit the num_interrupts field in the START_WORK IOCTL to get + this minimum automatically. + +What: /sys/class/cxl/<afu>/mmio_size +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the size of the MMIO space that may be mmaped + by userspace. + +What: /sys/class/cxl/<afu>/modes_supported +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + List of the modes this AFU supports. One per line. + Valid entries are: "dedicated_process" and "afu_directed" + +What: /sys/class/cxl/<afu>/mode +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + The current mode the AFU is using. Will be one of the modes + given in modes_supported. Writing will change the mode + provided that no user contexts are attached. + + +What: /sys/class/cxl/<afu>/prefault_mode +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + Set the mode for prefaulting in segments into the segment table + when performing the START_WORK ioctl. Possible values: + none: No prefaulting (default) + work_element_descriptor: Treat the work element + descriptor as an effective address and + prefault what it points to. + all: all segments process calling START_WORK maps. + +What: /sys/class/cxl/<afu>/reset +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: write only + Writing 1 here will reset the AFU provided there are not + contexts active on the AFU. + +What: /sys/class/cxl/<afu>/api_version +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the current version of the kernel/user API. + +What: /sys/class/cxl/<afu>/api_version_com +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the the lowest version of the userspace API + this this kernel supports. + + + +Master contexts (eg. /sys/class/cxl/afu0.0m) + +What: /sys/class/cxl/<afu>m/mmio_size +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the size of the MMIO space that may be mmaped + by userspace. This includes all slave contexts space also. + +What: /sys/class/cxl/<afu>m/pp_mmio_len +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the Per Process MMIO space length. + +What: /sys/class/cxl/<afu>m/pp_mmio_off +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the Per Process MMIO space offset. + + +Card info (eg. /sys/class/cxl/card0) + +What: /sys/class/cxl/<card>/caia_version +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Identifies the CAIA Version the card implements. + +What: /sys/class/cxl/<card>/psl_version +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Identifies the revision level of the PSL. + +What: /sys/class/cxl/<card>/base_image +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Identifies the revision level of the base image for devices + that support loadable PSLs. For FPGAs this field identifies + the image contained in the on-adapter flash which is loaded + during the initial program load. + +What: /sys/class/cxl/<card>/image_loaded +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Will return "user" or "factory" depending on the image loaded + onto the card.
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net index d322b05..e1b2e78 100644 --- a/Documentation/ABI/testing/sysfs-class-net +++ b/Documentation/ABI/testing/sysfs-class-net
@@ -159,7 +159,7 @@ lower-level interface protocol used. Ethernet devices will show a 'mtu' attribute value of 1500 unless changed. -What: /sys/calss/net/<iface>/netdev_group +What: /sys/class/net/<iface>/netdev_group Date: January 2011 KernelVersion: 2.6.39 Contact: netdev@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index 78c7bac..909e760 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power
@@ -18,3 +18,17 @@ This file is writeable and can be used to set the assumed battery 'full level'. As batteries age, this value has to be amended over time. + +What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer +Date: October 2014 +KernelVersion: 3.18.0 +Contact: Krzysztof Kozlowski <k.kozlowski@samsung.com> +Description: + This entry shows and sets the maximum time the max14577 + charger operates in fast-charge mode. When the timer expires + the device will terminate fast-charge mode (charging current + will drop to 0 A) and will trigger interrupt. + + Valid values: + - 5, 6 or 7 (hours), + - 0: disabled.
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc index 6a5fd07..85f4875 100644 --- a/Documentation/ABI/testing/sysfs-class-uwb_rc +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc
@@ -43,6 +43,19 @@ Reading returns the currently active channel, or -1 if the radio controller is not beaconing. +What: /sys/class/uwb_rc/uwbN/ASIE +Date: August 2014 +KernelVersion: 3.18 +Contact: linux-usb@vger.kernel.org +Description: + + The application-specific information element (ASIE) + included in this device's beacon, in space separated + hex octets. + + Reading returns the current ASIE. Writing replaces + the current ASIE with the one written. + What: /sys/class/uwb_rc/uwbN/scan Date: July 2008 KernelVersion: 2.6.27
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index 7405de2..deef3b5 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -61,6 +61,14 @@ http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils +What: /sys/devices/system/memory/memoryX/valid_zones +Date: July 2014 +Contact: Zhang Zhen <zhenzhang.zhang@huawei.com> +Description: + The file /sys/devices/system/memory/memoryX/valid_zones is + read-only and is designed to show which zone this memory + block can be onlined to. + What: /sys/devices/system/memoryX/nodeY Date: October 2009 Contact: Linux Memory Management list <linux-mm@kvack.org>
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 62dd725..6f9157f 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -44,6 +44,13 @@ Controls the FS utilization condition for the in-place-update policies. +What: /sys/fs/f2fs/<disk>/min_fsync_blocks +Date: September 2014 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: + Controls the dirty page count condition for the in-place-update + policies. + What: /sys/fs/f2fs/<disk>/max_small_discards Date: November 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com>
diff --git a/Documentation/ABI/testing/sysfs-ibft b/Documentation/ABI/testing/sysfs-ibft index c2b7d11..cac3930 100644 --- a/Documentation/ABI/testing/sysfs-ibft +++ b/Documentation/ABI/testing/sysfs-ibft
@@ -20,4 +20,4 @@ Contact: Konrad Rzeszutek <ketuzsezr@darnok.org> Description: The /sys/firmware/ibft/ethernetX directory will contain files that expose the iSCSI Boot Firmware Table NIC data. - This can this can the IP address, MAC, and gateway of the NIC. + Usually this contains the IP address, MAC, and gateway of the NIC.
diff --git a/Documentation/Changes b/Documentation/Changes index 227bec8..1de131b 100644 --- a/Documentation/Changes +++ b/Documentation/Changes
@@ -167,18 +167,11 @@ PCMCIAutils ----------- -PCMCIAutils replaces pcmcia-cs (see below). It properly sets up +PCMCIAutils replaces pcmcia-cs. It properly sets up PCMCIA sockets at system startup and loads the appropriate modules for 16-bit PCMCIA devices if the kernel is modularized and the hotplug subsystem is used. -Pcmcia-cs ---------- - -PCMCIA (PC Card) support is now partially implemented in the main -kernel source. The "pcmciautils" package (see above) replaces pcmcia-cs -for newest kernels. - Quota-tools ----------- @@ -341,17 +334,13 @@ ----------- o <ftp://ftp.kernel.org/pub/linux/utils/kernel/pcmcia/> -Pcmcia-cs ---------- -o <http://pcmcia-cs.sourceforge.net/> - Quota-tools ---------- o <http://sourceforge.net/projects/linuxquota/> DocBook Stylesheets ------------------- -o <http://nwalsh.com/docbook/dsssl/> +o <http://sourceforge.net/projects/docbook/files/docbook-dsssl/> XMLTO XSLT Frontend ------------------- @@ -359,11 +348,11 @@ Intel P6 microcode ------------------ -o <http://www.urbanmyth.org/microcode/> +o <https://downloadcenter.intel.com/> udev ---- -o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html> +o <http://www.freedesktop.org/software/systemd/man/udev.html> FUSE ---- @@ -371,7 +360,7 @@ mcelog ------ -o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/> +o <http://www.mcelog.org/> Networking **********
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 6b6bef3..3171822 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle
@@ -675,7 +675,7 @@ Many subsystems have Kconfig debug options to turn on -DDEBUG in the corresponding Makefile; in other cases specific files #define DEBUG. And when a debug message should be unconditionally printed, such as if it is -already inside a debug-related #ifdef secton, printk(KERN_DEBUG ...) can be +already inside a debug-related #ifdef section, printk(KERN_DEBUG ...) can be used.
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt index dcbbe36..0f7afb2 100644 --- a/Documentation/DMA-API-HOWTO.txt +++ b/Documentation/DMA-API-HOWTO.txt
@@ -531,7 +531,7 @@ size_t size = buffer->len; dma_handle = dma_map_single(dev, addr, size, direction); - if (dma_mapping_error(dma_handle)) { + if (dma_mapping_error(dev, dma_handle)) { /* * reduce current DMA mapping usage, * delay and try again later or @@ -588,7 +588,7 @@ size_t size = buffer->len; dma_handle = dma_map_page(dev, page, offset, size, direction); - if (dma_mapping_error(dma_handle)) { + if (dma_mapping_error(dev, dma_handle)) { /* * reduce current DMA mapping usage, * delay and try again later or @@ -689,7 +689,7 @@ dma_addr_t mapping; mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE); - if (dma_mapping_error(dma_handle)) { + if (dma_mapping_error(cp->dev, dma_handle)) { /* * reduce current DMA mapping usage, * delay and try again later or
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index bacefc5..be35bc3 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl
@@ -291,10 +291,9 @@ <title>Device Registration</title> <para> A number of functions are provided to help with device registration. - The functions deal with PCI, USB and platform devices, respectively. + The functions deal with PCI and platform devices, respectively. </para> !Edrivers/gpu/drm/drm_pci.c -!Edrivers/gpu/drm/drm_usb.c !Edrivers/gpu/drm/drm_platform.c <para> New drivers that no longer rely on the services provided by the @@ -3386,6 +3385,13 @@ by scheduling a timer. The delay is accessible through the vblankoffdelay module parameter or the <varname>drm_vblank_offdelay</varname> global variable and expressed in milliseconds. Its default value is 5000 ms. + Zero means never disable, and a negative value means disable immediately. + Drivers may override the behaviour by setting the + <structname>drm_device</structname> + <structfield>vblank_disable_immediate</structfield> flag, which when set + causes vblank interrupts to be disabled immediately regardless of the + drm_vblank_offdelay value. The flag should only be set if there's a + properly working hardware vblank counter present. </para> <para> When a vertical blanking interrupt occurs drivers only need to call the @@ -3400,6 +3406,7 @@ <sect2> <title>Vertical Blanking and Interrupt Handling Functions Reference</title> !Edrivers/gpu/drm/drm_irq.c +!Finclude/drm/drmP.h drm_crtc_vblank_waitqueue </sect2> </sect1> @@ -3918,6 +3925,11 @@ !Pdrivers/gpu/drm/i915/i915_cmd_parser.c batch buffer command parser !Idrivers/gpu/drm/i915/i915_cmd_parser.c </sect2> + <sect2> + <title>Logical Rings, Logical Ring Contexts and Execlists</title> +!Pdrivers/gpu/drm/i915/intel_lrc.c Logical Rings, Logical Ring Contexts and Execlists +!Idrivers/gpu/drm/i915/intel_lrc.c + </sect2> </sect1> </chapter> </part>
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index e584ee1..7c9cc48 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1972,7 +1972,7 @@ <itemizedlist> <listitem> <para> - <filename>Documentation/spinlocks.txt</filename>: + <filename>Documentation/locking/spinlocks.txt</filename>: Linus Torvalds' spinlocking tutorial in the kernel sources. </para> </listitem>
diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index df2962d..8bf7c61 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile
@@ -25,7 +25,7 @@ PHONY += cleanmediadocs cleanmediadocs: - -@rm `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null + -@rm -f `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null $(obj)/media_api.xml: $(GENFILES) FORCE
diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index 71f6bf9..8b5e014 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml
@@ -110,7 +110,7 @@ complex devices use the Media Controller (see <xref linkend="media_controller" />) which can be used for this purpose. But most drivers do not use it, and while some code exists that uses sysfs to discover related devices -(see libmedia_dev in the <ulink url="http://git.linuxtv.org/v4l-utils/">v4l-utils</ulink> +(see libmedia_dev in the <ulink url="http://git.linuxtv.org/cgit.cgi/v4l-utils.git/">v4l-utils</ulink> git repository), there is no library yet that can provide a single API towards both Media Controller-based devices and devices that do not use the Media Controller. If you want to work on this please write to the linux-media mailing list: &v4l-ml;.</para>
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index eee6f0f..0a2debf 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2545,6 +2545,40 @@ </orderedlist> </section> + <section> + <title>V4L2 in Linux 3.16</title> + <orderedlist> + <listitem> + <para>Added event V4L2_EVENT_SOURCE_CHANGE. + </para> + </listitem> + </orderedlist> + </section> + + <section> + <title>V4L2 in Linux 3.17</title> + <orderedlist> + <listitem> + <para>Extended &v4l2-pix-format;. Added format flags. + </para> + </listitem> + <listitem> + <para>Added compound control types and &VIDIOC-QUERY-EXT-CTRL;. + </para> + </listitem> + </orderedlist> + </section> + + <section> + <title>V4L2 in Linux 3.18</title> + <orderedlist> + <listitem> + <para>Added <constant>V4L2_CID_PAN_SPEED</constant> and + <constant>V4L2_CID_TILT_SPEED</constant> camera controls.</para> + </listitem> + </orderedlist> + </section> + <section id="other"> <title>Relation of V4L2 to other Linux multimedia APIs</title>
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 9f5ffd8..e013e4b 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3965,6 +3965,27 @@ </row> <row><entry></entry></row> + <row> + <entry spanname="id"><constant>V4L2_CID_PAN_SPEED</constant> </entry> + <entry>integer</entry> + </row><row><entry spanname="descr">This control turns the +camera horizontally at the specific speed. The unit is undefined. A +positive value moves the camera to the right (clockwise when viewed +from above), a negative value to the left. A value of zero stops the motion +if one is in progress and has no effect otherwise.</entry> + </row> + <row><entry></entry></row> + + <row> + <entry spanname="id"><constant>V4L2_CID_TILT_SPEED</constant> </entry> + <entry>integer</entry> + </row><row><entry spanname="descr">This control turns the +camera vertically at the specified speed. The unit is undefined. A +positive value moves the camera up, a negative value down. A value of zero +stops the motion if one is in progress and has no effect otherwise.</entry> + </row> + <row><entry></entry></row> + </tbody> </tgroup> </table> @@ -4790,6 +4811,40 @@ conversion. </entry> </row> + <row> + <entry spanname="id"><constant>V4L2_CID_TEST_PATTERN_RED</constant></entry> + <entry>integer</entry> + </row> + <row> + <entry spanname="descr">Test pattern red colour component. + </entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_TEST_PATTERN_GREENR</constant></entry> + <entry>integer</entry> + </row> + <row> + <entry spanname="descr">Test pattern green (next to red) + colour component. + </entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_TEST_PATTERN_BLUE</constant></entry> + <entry>integer</entry> + </row> + <row> + <entry spanname="descr">Test pattern blue colour component. + </entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_TEST_PATTERN_GREENB</constant></entry> + <entry>integer</entry> + </row> + <row> + <entry spanname="descr">Test pattern green (next to blue) + colour component. + </entry> + </row> <row><entry></entry></row> </tbody> </tgroup>
diff --git a/Documentation/DocBook/media/v4l/func-poll.xml b/Documentation/DocBook/media/v4l/func-poll.xml index 85cad8b..4c73f11 100644 --- a/Documentation/DocBook/media/v4l/func-poll.xml +++ b/Documentation/DocBook/media/v4l/func-poll.xml
@@ -29,9 +29,12 @@ to accept data for output.</para> <para>When streaming I/O has been negotiated this function waits -until a buffer has been filled or displayed and can be dequeued with -the &VIDIOC-DQBUF; ioctl. When buffers are already in the outgoing -queue of the driver the function returns immediately.</para> +until a buffer has been filled by the capture device and can be dequeued +with the &VIDIOC-DQBUF; ioctl. For output devices this function waits +until the device is ready to accept a new buffer to be queued up with +the &VIDIOC-QBUF; ioctl for display. When buffers are already in the outgoing +queue of the driver (capture) or the incoming queue isn't full (display) +the function returns immediately.</para> <para>On success <function>poll()</function> returns the number of file descriptors that have been selected (that is, file descriptors @@ -44,10 +47,22 @@ flags. When the function timed out it returns a value of zero, on failure it returns <returnvalue>-1</returnvalue> and the <varname>errno</varname> variable is set appropriately. When the -application did not call &VIDIOC-QBUF; or &VIDIOC-STREAMON; yet the +application did not call &VIDIOC-STREAMON; the <function>poll()</function> function succeeds, but sets the <constant>POLLERR</constant> flag in the -<structfield>revents</structfield> field.</para> +<structfield>revents</structfield> field. When the +application has called &VIDIOC-STREAMON; for a capture device but hasn't +yet called &VIDIOC-QBUF;, the <function>poll()</function> function +succeeds and sets the <constant>POLLERR</constant> flag in the +<structfield>revents</structfield> field. For output devices this +same situation will cause <function>poll()</function> to succeed +as well, but it sets the <constant>POLLOUT</constant> and +<constant>POLLWRNORM</constant> flags in the <structfield>revents</structfield> +field.</para> + + <para>If an event occurred (see &VIDIOC-DQEVENT;) then +<constant>POLLPRI</constant> will be set in the <structfield>revents</structfield> +field and <function>poll()</function> will return.</para> <para>When use of the <function>read()</function> function has been negotiated and the driver does not capture yet, the @@ -58,10 +73,18 @@ may return immediately.</para> <para>When use of the <function>write()</function> function has -been negotiated the <function>poll</function> function just waits +been negotiated and the driver does not stream yet, the +<function>poll</function> function starts streaming. When that fails +it returns a <constant>POLLERR</constant> as above. Otherwise it waits until the driver is ready for a non-blocking <function>write()</function> call.</para> + <para>If the caller is only interested in events (just +<constant>POLLPRI</constant> is set in the <structfield>events</structfield> +field), then <function>poll()</function> will <emphasis>not</emphasis> +start streaming if the driver does not stream yet. This makes it +possible to just poll for events and not for buffers.</para> + <para>All drivers implementing the <function>read()</function> or <function>write()</function> function or streaming I/O must also support the <function>poll()</function> function.</para>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml index 2aae8e9..6ab4f0f 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml
@@ -237,9 +237,9 @@ <entry>g<subscript>4</subscript></entry> <entry>g<subscript>3</subscript></entry> </row> - <row id="V4L2-PIX-FMT-RGB555X"> - <entry><constant>V4L2_PIX_FMT_RGB555X</constant></entry> - <entry>'RGBQ'</entry> + <row id="V4L2-PIX-FMT-ARGB555X"> + <entry><constant>V4L2_PIX_FMT_ARGB555X</constant></entry> + <entry>'AR15' | (1 << 31)</entry> <entry></entry> <entry>a</entry> <entry>r<subscript>4</subscript></entry> @@ -259,6 +259,28 @@ <entry>b<subscript>1</subscript></entry> <entry>b<subscript>0</subscript></entry> </row> + <row id="V4L2-PIX-FMT-XRGB555X"> + <entry><constant>V4L2_PIX_FMT_XRGB555X</constant></entry> + <entry>'XR15' | (1 << 31)</entry> + <entry></entry> + <entry>-</entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> <row id="V4L2-PIX-FMT-RGB565X"> <entry><constant>V4L2_PIX_FMT_RGB565X</constant></entry> <entry>'RGBR'</entry> @@ -464,7 +486,7 @@ </row> <row id="V4L2-PIX-FMT-ARGB32"> <entry><constant>V4L2_PIX_FMT_ARGB32</constant></entry> - <entry>'AX24'</entry> + <entry>'BA24'</entry> <entry></entry> <entry>a<subscript>7</subscript></entry> <entry>a<subscript>6</subscript></entry> @@ -800,6 +822,28 @@ <entry>g<subscript>4</subscript></entry> <entry>g<subscript>3</subscript></entry> </row> + <row id="V4L2-PIX-FMT-RGB555X"> + <entry><constant>V4L2_PIX_FMT_RGB555X</constant></entry> + <entry>'RGBQ'</entry> + <entry></entry> + <entry>a</entry> + <entry>r<subscript>4</subscript></entry> + <entry>r<subscript>3</subscript></entry> + <entry>r<subscript>2</subscript></entry> + <entry>r<subscript>1</subscript></entry> + <entry>r<subscript>0</subscript></entry> + <entry>g<subscript>4</subscript></entry> + <entry>g<subscript>3</subscript></entry> + <entry></entry> + <entry>g<subscript>2</subscript></entry> + <entry>g<subscript>1</subscript></entry> + <entry>g<subscript>0</subscript></entry> + <entry>b<subscript>4</subscript></entry> + <entry>b<subscript>3</subscript></entry> + <entry>b<subscript>2</subscript></entry> + <entry>b<subscript>1</subscript></entry> + <entry>b<subscript>0</subscript></entry> + </row> <row id="V4L2-PIX-FMT-BGR32"> <entry><constant>V4L2_PIX_FMT_BGR32</constant></entry> <entry>'BGR4'</entry>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index f2f81f0..7cfe618 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -152,10 +152,11 @@ applications. --> <revision> - <revnumber>3.16</revnumber> - <date>2014-05-27</date> - <authorinitials>lp</authorinitials> - <revremark>Extended &v4l2-pix-format;. Added format flags. + <revnumber>3.17</revnumber> + <date>2014-08-04</date> + <authorinitials>lp, hv</authorinitials> + <revremark>Extended &v4l2-pix-format;. Added format flags. Added compound control types +and VIDIOC_QUERY_EXT_CTRL. </revremark> </revision> @@ -538,7 +539,7 @@ </partinfo> <title>Video for Linux Two API Specification</title> - <subtitle>Revision 3.14</subtitle> + <subtitle>Revision 3.17</subtitle> <chapter id="common"> &sub-common;
diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml index cb77325..b036f89 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
@@ -76,21 +76,22 @@ <entry></entry> <entry>&v4l2-event-vsync;</entry> <entry><structfield>vsync</structfield></entry> - <entry>Event data for event V4L2_EVENT_VSYNC. + <entry>Event data for event <constant>V4L2_EVENT_VSYNC</constant>. </entry> </row> <row> <entry></entry> <entry>&v4l2-event-ctrl;</entry> <entry><structfield>ctrl</structfield></entry> - <entry>Event data for event V4L2_EVENT_CTRL. + <entry>Event data for event <constant>V4L2_EVENT_CTRL</constant>. </entry> </row> <row> <entry></entry> <entry>&v4l2-event-frame-sync;</entry> <entry><structfield>frame_sync</structfield></entry> - <entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry> + <entry>Event data for event + <constant>V4L2_EVENT_FRAME_SYNC</constant>.</entry> </row> <row> <entry></entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-edid.xml b/Documentation/DocBook/media/v4l/vidioc-g-edid.xml index ce4563b..6df40db 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-edid.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-edid.xml
@@ -24,7 +24,7 @@ <funcdef>int <function>ioctl</function></funcdef> <paramdef>int <parameter>fd</parameter></paramdef> <paramdef>int <parameter>request</parameter></paramdef> - <paramdef>const struct v4l2_edid *<parameter>argp</parameter></paramdef> + <paramdef>struct v4l2_edid *<parameter>argp</parameter></paramdef> </funcprototype> </funcsynopsis> </refsynopsisdiv> @@ -125,17 +125,17 @@ <structfield>blocks</structfield> is 0, then the EDID is disabled or erased.</entry> </row> <row> - <entry>__u8 *</entry> - <entry><structfield>edid</structfield></entry> - <entry>Pointer to memory that contains the EDID. The minimum size is - <structfield>blocks</structfield> * 128.</entry> - </row> - <row> <entry>__u32</entry> <entry><structfield>reserved</structfield>[5]</entry> <entry>Reserved for future extensions. Applications and drivers must set the array to zero.</entry> </row> + <row> + <entry>__u8 *</entry> + <entry><structfield>edid</structfield></entry> + <entry>Pointer to memory that contains the EDID. The minimum size is + <structfield>blocks</structfield> * 128.</entry> + </row> </tbody> </tgroup> </table>
diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml index 1ba9e99..c62a736 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml
@@ -119,7 +119,7 @@ </row> <row> <entry>&v4l2-rect;</entry> - <entry><structfield>rect</structfield></entry> + <entry><structfield>r</structfield></entry> <entry>Selection rectangle, in pixels.</entry> </row> <row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml index 9f60956..d7c9365 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml
@@ -176,7 +176,7 @@ </row> <row> <entry><constant>V4L2_EVENT_MOTION_DET</constant></entry> - <entry>5</entry> + <entry>6</entry> <entry> <para>Triggered whenever the motion detection state for one or more of the regions changes. This event has a &v4l2-event-motion-det; associated with it.</para>
diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index 85fc0e2..4cd5b2c 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl
@@ -593,7 +593,7 @@ Each device has one control endpoint (endpoint zero) which supports a limited RPC style RPC access. Devices are configured - by khubd (in the kernel) setting a device-wide + by hub_wq (in the kernel) setting a device-wide <emphasis>configuration</emphasis> that affects things like power consumption and basic functionality. The endpoints are part of USB <emphasis>interfaces</emphasis>,
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl index 6f639d9..784793d 100644 --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -2742,7 +2742,9 @@ <para> Another note is that this callback is non-atomic - (schedulable). This is important, because the + (schedulable) as default, i.e. when no + <structfield>nonatomic</structfield> flag set. + This is important, because the <structfield>trigger</structfield> callback is atomic (non-schedulable). That is, mutexes or any schedule-related functions are not available in @@ -2900,8 +2902,9 @@ </para> <para> - As mentioned, this callback is atomic. You cannot call - functions which may sleep. + As mentioned, this callback is atomic as default unless + <structfield>nonatomic</structfield> flag set, and + you cannot call functions which may sleep. The trigger callback should be as minimal as possible, just really triggering the DMA. The other stuff should be initialized hw_params and prepare callbacks properly @@ -2936,7 +2939,7 @@ </para> <para> - This callback is also atomic. + This callback is also atomic as default. </para> </section> @@ -2972,7 +2975,7 @@ is useful only for such a purpose. </para> <para> - This callback is atomic. + This callback is atomic as default. </para> </section> @@ -3175,6 +3178,21 @@ called with local interrupts disabled. </para> + <para> + The recent changes in PCM core code, however, allow all PCM + operations to be non-atomic. This assumes that the all caller + sides are in non-atomic contexts. For example, the function + <function>snd_pcm_period_elapsed()</function> is called + typically from the interrupt handler. But, if you set up the + driver to use a threaded interrupt handler, this call can be in + non-atomic context, too. In such a case, you can set + <structfield>nonatomic</structfield> filed of + <structname>snd_pcm</structname> object after creating it. + When this flag is set, mutex and rwsem are used internally in + the PCM core instead of spin and rwlocks, so that you can call + all PCM functions safely in a non-atomic context. + </para> + </section> <section id="pcm-interface-constraints"> <title>Constraints</title>
diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 57cf5ef..93aa860 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO
@@ -324,7 +324,6 @@ testing repository exists into which virtually all subsystem trees are pulled on an almost daily basis: http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git - http://linux.f-seidel.de/linux-next/pmwiki/ This way, the -next kernel gives a summary outlook onto what will be expected to go into the mainline kernel at the next merge period.
diff --git a/Documentation/Makefile b/Documentation/Makefile index 31d302b..6883a1b 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile
@@ -1,3 +1,4 @@ -obj-m := DocBook/ accounting/ auxdisplay/ connector/ \ - filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \ - pcmcia/ spi/ timers/ watchdog/src/ misc-devices/mei/ +subdir-y := accounting arm auxdisplay blackfin connector \ + filesystems filesystems ia64 laptops mic misc-devices \ + networking pcmcia prctl ptp spi timers vDSO video4linux \ + watchdog
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 68fe3ad..ef5a2fd 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt
@@ -56,8 +56,20 @@ two jiffies. (This is a cpp macro, not a kernel configuration parameter.) -When a CPU detects that it is stalling, it will print a message similar -to the following: +rcupdate.rcu_task_stall_timeout + + This boot/sysfs parameter controls the RCU-tasks stall warning + interval. A value of zero or less suppresses RCU-tasks stall + warnings. A positive value sets the stall-warning interval + in jiffies. An RCU-tasks stall warning starts wtih the line: + + INFO: rcu_tasks detected stalls on tasks: + + And continues with the output of sched_show_task() for each + task stalling the current RCU-tasks grace period. + +For non-RCU-tasks flavors of RCU, when a CPU detects that it is stalling, +it will print a message similar to the following: INFO: rcu_sched_state detected stall on CPU 5 (t=2500 jiffies) @@ -174,8 +186,12 @@ o A CPU looping with bottom halves disabled. This condition can result in RCU-sched and RCU-bh stalls. -o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel - without invoking schedule(). +o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the + kernel without invoking schedule(). Note that cond_resched() + does not necessarily prevent RCU CPU stall warnings. Therefore, + if the looping in the kernel is really expected and desirable + behavior, you might need to replace some of the cond_resched() + calls with calls to cond_resched_rcu_qs(). o A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might happen to preempt a low-priority task in the middle of an RCU @@ -208,11 +224,10 @@ This resulted in a series of RCU CPU stall warnings, eventually leading the realization that the CPU had failed. -The RCU, RCU-sched, and RCU-bh implementations have CPU stall warning. -SRCU does not have its own CPU stall warnings, but its calls to -synchronize_sched() will result in RCU-sched detecting RCU-sched-related -CPU stalls. Please note that RCU only detects CPU stalls when there is -a grace period in progress. No grace period, no CPU stall warnings. +The RCU, RCU-sched, RCU-bh, and RCU-tasks implementations have CPU stall +warning. Note that SRCU does -not- have CPU stall warnings. Please note +that RCU only detects CPU stalls when there is a grace period in progress. +No grace period, no CPU stall warnings. To diagnose the cause of the stall, inspect the stack traces. The offending function will usually be near the top of the stack.
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 482c749..1fa1caa 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches
@@ -483,12 +483,10 @@ 14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes: -If this patch fixes a problem reported by somebody else, consider adding a -Reported-by: tag to credit the reporter for their contribution. Please -note that this tag should not be added without the reporter's permission, -especially if the problem was not reported in a public forum. That said, -if we diligently credit our bug reporters, they will, hopefully, be -inspired to help us again in the future. +The Reported-by tag gives credit to people who find bugs and report them and it +hopefully inspires them to help us again in the future. Please note that if +the bug was reported in private, then ask for permission first before using the +Reported-by tag. A Tested-by: tag indicates that the patch has been successfully tested (in some environment) by the person named. This tag informs maintainers that
diff --git a/Documentation/accounting/Makefile b/Documentation/accounting/Makefile index 31929eb..7e232cb 100644 --- a/Documentation/accounting/Makefile +++ b/Documentation/accounting/Makefile
@@ -1,6 +1,3 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - # List of programs to build hostprogs-y := getdelays
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index e182be5..b60d2ab 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt
@@ -312,3 +312,30 @@ There are also devm_* versions of these functions which release the descriptors once the device is released. + +MFD devices +~~~~~~~~~~~ +The MFD devices register their children as platform devices. For the child +devices there needs to be an ACPI handle that they can use to reference +parts of the ACPI namespace that relate to them. In the Linux MFD subsystem +we provide two ways: + + o The children share the parent ACPI handle. + o The MFD cell can specify the ACPI id of the device. + +For the first case, the MFD drivers do not need to do anything. The +resulting child platform device will have its ACPI_COMPANION() set to point +to the parent device. + +If the ACPI namespace has a device that we can match using an ACPI id, +the id should be set like: + + static struct mfd_cell my_subdevice_cell = { + .name = "my_subdevice", + /* set the resources relative to the parent */ + .acpi_pnpid = "XYZ0001", + }; + +The ACPI id "XYZ0001" is then used to lookup an ACPI device directly under +the MFD device and if found, that ACPI companion device is bound to the +resulting child platform device.
diff --git a/Documentation/applying-patches.txt b/Documentation/applying-patches.txt index a083ba3..77df55b 100644 --- a/Documentation/applying-patches.txt +++ b/Documentation/applying-patches.txt
@@ -94,7 +94,7 @@ --- When patch applies a patch file it attempts to verify the sanity of the file in different ways. -Checking that the file looks like a valid patch file & checking the code +Checking that the file looks like a valid patch file and checking the code around the bits being modified matches the context provided in the patch are just two of the basic sanity checks patch does.
diff --git a/Documentation/arm/Makefile b/Documentation/arm/Makefile new file mode 100644 index 0000000..732c770 --- /dev/null +++ b/Documentation/arm/Makefile
@@ -0,0 +1 @@ +subdir-y := SH-Mobile
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README index 4dc66c1..1745379 100644 --- a/Documentation/arm/Marvell/README +++ b/Documentation/arm/Marvell/README
@@ -103,6 +103,10 @@ NOTE: not to be confused with the non-SMP 78xx0 SoCs Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf Functional Spec: http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf + Hardware Specs: + http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF + http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF + http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF Core: Sheeva ARMv7 compatible
diff --git a/Documentation/arm/SH-Mobile/.gitignore b/Documentation/arm/SH-Mobile/.gitignore new file mode 100644 index 0000000..c928dbf --- /dev/null +++ b/Documentation/arm/SH-Mobile/.gitignore
@@ -0,0 +1 @@ +vrl4
diff --git a/Documentation/arm/SH-Mobile/Makefile b/Documentation/arm/SH-Mobile/Makefile index 8771d83..bca8a7e 100644 --- a/Documentation/arm/SH-Mobile/Makefile +++ b/Documentation/arm/SH-Mobile/Makefile
@@ -1,8 +1,7 @@ -BIN := vrl4 +# List of programs to build +hostprogs-y := vrl4 -.PHONY: all -all: $(BIN) +# Tell kbuild to always build the programs +always := $(hostprogs-y) -.PHONY: clean -clean: - rm -f *.o $(BIN) +HOSTCFLAGS_vrl4.o += -I$(objtree)/usr/include -I$(srctree)/tools/include
diff --git a/Documentation/arm/SH-Mobile/vrl4.c b/Documentation/arm/SH-Mobile/vrl4.c index e8a1913..f4cd8ad 100644 --- a/Documentation/arm/SH-Mobile/vrl4.c +++ b/Documentation/arm/SH-Mobile/vrl4.c
@@ -34,6 +34,7 @@ #include <stdint.h> #include <stdio.h> #include <errno.h> +#include <tools/endian.h> struct hdr { uint32_t magic1; @@ -77,7 +78,7 @@ #define ROUND_UP(x) ((x + ALIGN - 1) & ~(ALIGN - 1)) -ssize_t do_read(int fd, void *buf, size_t count) +static ssize_t do_read(int fd, void *buf, size_t count) { size_t offset = 0; ssize_t l; @@ -98,7 +99,7 @@ return offset; } -ssize_t do_write(int fd, const void *buf, size_t count) +static ssize_t do_write(int fd, const void *buf, size_t count) { size_t offset = 0; ssize_t l; @@ -117,7 +118,7 @@ return offset; } -ssize_t write_zero(int fd, size_t len) +static ssize_t write_zero(int fd, size_t len) { size_t i = len;
diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt index 344e85c..d7273a5 100644 --- a/Documentation/arm64/memory.txt +++ b/Documentation/arm64/memory.txt
@@ -17,7 +17,7 @@ the same bits set to 1. TTBRx selection is given by bit 63 of the virtual address. The swapper_pg_dir contains only kernel (global) mappings while the user pgd contains only user (non-global) mappings. -The swapper_pgd_dir address is written to TTBR1 and never written to +The swapper_pg_dir address is written to TTBR1 and never written to TTBR0.
diff --git a/Documentation/auxdisplay/Makefile b/Documentation/auxdisplay/Makefile index 51fe233..ada4dac 100644 --- a/Documentation/auxdisplay/Makefile +++ b/Documentation/auxdisplay/Makefile
@@ -1,6 +1,3 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - # List of programs to build hostprogs-y := cfag12864b-example
diff --git a/Documentation/binfmt_misc.txt b/Documentation/binfmt_misc.txt index c1ed694..6b1de70 100644 --- a/Documentation/binfmt_misc.txt +++ b/Documentation/binfmt_misc.txt
@@ -15,39 +15,50 @@ mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc To actually register a new binary type, you have to set up a string looking like -:name:type:offset:magic:mask:interpreter:flags (where you can choose the ':' upon -your needs) and echo it to /proc/sys/fs/binfmt_misc/register. +:name:type:offset:magic:mask:interpreter:flags (where you can choose the ':' +upon your needs) and echo it to /proc/sys/fs/binfmt_misc/register. + Here is what the fields mean: - 'name' is an identifier string. A new /proc file will be created with this - name below /proc/sys/fs/binfmt_misc + name below /proc/sys/fs/binfmt_misc; cannot contain slashes '/' for obvious + reasons. - 'type' is the type of recognition. Give 'M' for magic and 'E' for extension. - 'offset' is the offset of the magic/mask in the file, counted in bytes. This - defaults to 0 if you omit it (i.e. you write ':name:type::magic...') + defaults to 0 if you omit it (i.e. you write ':name:type::magic...'). Ignored + when using filename extension matching. - 'magic' is the byte sequence binfmt_misc is matching for. The magic string - may contain hex-encoded characters like \x0a or \xA4. In a shell environment - you will have to write \\x0a to prevent the shell from eating your \. + may contain hex-encoded characters like \x0a or \xA4. Note that you must + escape any NUL bytes; parsing halts at the first one. In a shell environment + you might have to write \\x0a to prevent the shell from eating your \. If you chose filename extension matching, this is the extension to be recognised (without the '.', the \x0a specials are not allowed). Extension - matching is case sensitive! + matching is case sensitive, and slashes '/' are not allowed! - 'mask' is an (optional, defaults to all 0xff) mask. You can mask out some bits from matching by supplying a string like magic and as long as magic. - The mask is anded with the byte sequence of the file. + The mask is anded with the byte sequence of the file. Note that you must + escape any NUL bytes; parsing halts at the first one. Ignored when using + filename extension matching. - 'interpreter' is the program that should be invoked with the binary as first argument (specify the full path) - 'flags' is an optional field that controls several aspects of the invocation - of the interpreter. It is a string of capital letters, each controls a certain - aspect. The following flags are supported - - 'P' - preserve-argv[0]. Legacy behavior of binfmt_misc is to overwrite the - original argv[0] with the full path to the binary. When this flag is - included, binfmt_misc will add an argument to the argument vector for - this purpose, thus preserving the original argv[0]. + of the interpreter. It is a string of capital letters, each controls a + certain aspect. The following flags are supported - + 'P' - preserve-argv[0]. Legacy behavior of binfmt_misc is to overwrite + the original argv[0] with the full path to the binary. When this + flag is included, binfmt_misc will add an argument to the argument + vector for this purpose, thus preserving the original argv[0]. + e.g. If your interp is set to /bin/foo and you run `blah` (which is + in /usr/local/bin), then the kernel will execute /bin/foo with + argv[] set to ["/bin/foo", "/usr/local/bin/blah", "blah"]. The + interp has to be aware of this so it can execute /usr/local/bin/blah + with argv[] set to ["blah"]. 'O' - open-binary. Legacy behavior of binfmt_misc is to pass the full path of the binary to the interpreter as an argument. When this flag is included, binfmt_misc will open the file for reading and pass its descriptor as an argument, instead of the full path, thus allowing - the interpreter to execute non-readable binaries. This feature should - be used with care - the interpreter has to be trusted not to emit - the contents of the non-readable binary. + the interpreter to execute non-readable binaries. This feature + should be used with care - the interpreter has to be trusted not to + emit the contents of the non-readable binary. 'C' - credentials. Currently, the behavior of binfmt_misc is to calculate the credentials and security token of the new process according to the interpreter. When this flag is included, these attributes are @@ -58,7 +69,7 @@ There are some restrictions: - - the whole register string may not exceed 255 characters + - the whole register string may not exceed 1920 characters - the magic must reside in the first 128 bytes of the file, i.e. offset+size(magic) has to be less than 128 - the interpreter string may not exceed 127 characters @@ -110,7 +121,4 @@ cause unexpected behaviour and can be a security hazard. -There is a web page about binfmt_misc at -http://www.tat.physik.uni-tuebingen.de - Richard Günther <rguenth@tat.physik.uni-tuebingen.de>
diff --git a/Documentation/blackfin/Makefile b/Documentation/blackfin/Makefile index 773dbb1..c7e6c99 100644 --- a/Documentation/blackfin/Makefile +++ b/Documentation/blackfin/Makefile
@@ -1,6 +1,3 @@ +ifneq ($(CONFIG_BLACKFIN),) obj-m := gptimers-example.o - -all: modules - -modules clean: - $(MAKE) -C ../.. SUBDIRS=$(PWD) $@ +endif
diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt index 2d735b0a..f56ec97 100644 --- a/Documentation/block/data-integrity.txt +++ b/Documentation/block/data-integrity.txt
@@ -129,11 +129,11 @@ 4.1 BIO The data integrity patches add a new field to struct bio when -CONFIG_BLK_DEV_INTEGRITY is enabled. bio->bi_integrity is a pointer -to a struct bip which contains the bio integrity payload. Essentially -a bip is a trimmed down struct bio which holds a bio_vec containing -the integrity metadata and the required housekeeping information (bvec -pool, vector count, etc.) +CONFIG_BLK_DEV_INTEGRITY is enabled. bio_integrity(bio) returns a +pointer to a struct bip which contains the bio integrity payload. +Essentially a bip is a trimmed down struct bio which holds a bio_vec +containing the integrity metadata and the required housekeeping +information (bvec pool, vector count, etc.) A kernel subsystem can enable data integrity protection on a bio by calling bio_integrity_alloc(bio). This will allocate and attach the @@ -192,16 +192,6 @@ supported by the block device. - int bdev_integrity_enabled(block_device, int rw); - - bdev_integrity_enabled() will return 1 if the block device - supports integrity metadata transfer for the data direction - specified in 'rw'. - - bdev_integrity_enabled() honors the write_generate and - read_verify flags in sysfs and will respond accordingly. - - int bio_integrity_prep(bio); To generate IMD for WRITE and to set up buffers for READ, the @@ -216,36 +206,6 @@ bio_integrity_enabled() returned 1. - int bio_integrity_tag_size(bio); - - If the filesystem wants to use the application tag space it will - first have to find out how much storage space is available. - Because tag space is generally limited (usually 2 bytes per - sector regardless of sector size), the integrity framework - supports interleaving the information between the sectors in an - I/O. - - Filesystems can call bio_integrity_tag_size(bio) to find out how - many bytes of storage are available for that particular bio. - - Another option is bdev_get_tag_size(block_device) which will - return the number of available bytes per hardware sector. - - - int bio_integrity_set_tag(bio, void *tag_buf, len); - - After a successful return from bio_integrity_prep(), - bio_integrity_set_tag() can be used to attach an opaque tag - buffer to a bio. Obviously this only makes sense if the I/O is - a WRITE. - - - int bio_integrity_get_tag(bio, void *tag_buf, len); - - Similarly, at READ I/O completion time the filesystem can - retrieve the tag buffer using bio_integrity_get_tag(). - - 5.3 PASSING EXISTING INTEGRITY METADATA Filesystems that either generate their own integrity metadata or @@ -298,8 +258,6 @@ .name = "STANDARDSBODY-TYPE-VARIANT-CSUM", .generate_fn = my_generate_fn, .verify_fn = my_verify_fn, - .get_tag_fn = my_get_tag_fn, - .set_tag_fn = my_set_tag_fn, .tuple_size = sizeof(struct my_tuple_size), .tag_size = <tag bytes per hw sector>, }; @@ -321,7 +279,5 @@ are available per hardware sector. For DIF this is either 2 or 0 depending on the value of the Control Mode Page ATO bit. - See 6.2 for a description of get_tag_fn and set_tag_fn. - ---------------------------------------------------------------------- 2007-12-24 Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.txt index b2830b4..2f6c6ff 100644 --- a/Documentation/block/null_blk.txt +++ b/Documentation/block/null_blk.txt
@@ -42,7 +42,7 @@ Number of block devices instantiated. They are instantiated as /dev/nullb0, etc. -irq_mode=[0-2]: Default: 1-Soft-irq +irqmode=[0-2]: Default: 1-Soft-irq The completion mode used for completing IOs to the block-layer. 0: None. @@ -53,7 +53,7 @@ completion. completion_nsec=[ns]: Default: 10.000ns - Combined with irq_mode=2 (timer). The time each completion event must wait. + Combined with irqmode=2 (timer). The time each completion event must wait. submit_queues=[0..nr_cpus]: The number of submission queues attached to the device driver. If unset, it
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 7d2d046..3a29f89 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt
@@ -11,7 +11,7 @@ add_random (RW) ---------------- -This file allows to trun off the disk entropy contribution. Default +This file allows to turn off the disk entropy contribution. Default value of this file is '1'(on). discard_granularity (RO) @@ -72,7 +72,7 @@ minimum_io_size (RO) -------------------- -This is the smallest preferred io size reported by the device. +This is the smallest preferred IO size reported by the device. nomerges (RW) ------------- @@ -98,7 +98,7 @@ optimal_io_size (RO) -------------------- -This is the optimal io size reported by the device. +This is the optimal IO size reported by the device. physical_block_size (RO) ------------------------
diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt index 0595c3f..7fcf9c6 100644 --- a/Documentation/blockdev/zram.txt +++ b/Documentation/blockdev/zram.txt
@@ -74,14 +74,30 @@ since we expect a 2:1 compression ratio. Note that zram uses about 0.1% of the size of the disk when not in use so a huge zram is wasteful. -5) Activate: +5) Set memory limit: Optional + Set memory limit by writing the value to sysfs node 'mem_limit'. + The value can be either in bytes or you can use mem suffixes. + In addition, you could change the value in runtime. + Examples: + # limit /dev/zram0 with 50MB memory + echo $((50*1024*1024)) > /sys/block/zram0/mem_limit + + # Using mem suffixes + echo 256K > /sys/block/zram0/mem_limit + echo 512M > /sys/block/zram0/mem_limit + echo 1G > /sys/block/zram0/mem_limit + + # To disable memory limit + echo 0 > /sys/block/zram0/mem_limit + +6) Activate: mkswap /dev/zram0 swapon /dev/zram0 mkfs.ext4 /dev/zram1 mount /dev/zram1 /tmp -6) Stats: +7) Stats: Per-device statistics are exported as various nodes under /sys/block/zram<id>/ disksize @@ -95,12 +111,13 @@ orig_data_size compr_data_size mem_used_total + mem_used_max -7) Deactivate: +8) Deactivate: swapoff /dev/zram0 umount /dev/zram1 -8) Reset: +9) Reset: Write any positive value to 'reset' sysfs node echo 1 > /sys/block/zram0/reset echo 1 > /sys/block/zram1/reset
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 7740038..3c94ff3 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt
@@ -345,14 +345,14 @@ The implementation is simple. Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag -PF_SPREAD_PAGE for each task that is in that cpuset or subsequently +PFA_SPREAD_PAGE for each task that is in that cpuset or subsequently joins that cpuset. The page allocation calls for the page cache -is modified to perform an inline check for this PF_SPREAD_PAGE task +is modified to perform an inline check for this PFA_SPREAD_PAGE task flag, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. Similarly, setting 'cpuset.memory_spread_slab' turns on the flag -PF_SPREAD_SLAB, and appropriately marked slab caches will allocate +PFA_SPREAD_SLAB, and appropriately marked slab caches will allocate pages from the node returned by cpuset_mem_spread_node(). The cpuset_mem_spread_node() routine is also simple. It uses the
diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process index 2e06179..c24e156 100644 --- a/Documentation/development-process/2.Process +++ b/Documentation/development-process/2.Process
@@ -289,10 +289,6 @@ http://www.kernel.org/pub/linux/kernel/next/ -Some information about linux-next has been gathered at: - - http://linux.f-seidel.de/linux-next/pmwiki/ - Linux-next has become an integral part of the kernel development process; all patches merged during a given merge window should really have found their way into linux-next some time before the merge window opens.
diff --git a/Documentation/development-process/8.Conclusion b/Documentation/development-process/8.Conclusion index 1990ab4..caef690 100644 --- a/Documentation/development-process/8.Conclusion +++ b/Documentation/development-process/8.Conclusion
@@ -22,10 +22,6 @@ http://kernelnewbies.org/ -Information about the linux-next tree gathers at: - - http://linux.f-seidel.de/linux-next/pmwiki/ - And, of course, one should not forget http://kernel.org/, the definitive location for kernel release information.
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt new file mode 100644 index 0000000..d0ce01d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
@@ -0,0 +1,15 @@ +Altera SOCFPGA SDRAM Error Detection & Correction [EDAC] +The EDAC accesses a range of registers in the SDRAM controller. + +Required properties: +- compatible : should contain "altr,sdram-edac"; +- altr,sdr-syscon : phandle of the sdr module +- interrupts : Should contain the SDRAM ECC IRQ in the + appropriate format for the IRQ controller. + +Example: + sdramedac { + compatible = "altr,sdram-edac"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 39 4>; + };
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt new file mode 100644 index 0000000..7eece72 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -0,0 +1,8 @@ +Amlogic MesonX device tree bindings +------------------------------------------- + +Boards with the Amlogic Meson6 SoC shall have the following properties: + +Required root node property: + +compatible = "amlogic,meson6";
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 16f60b4..562cda9 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -1,6 +1,43 @@ Atmel AT91 device tree bindings. ================================ +Boards with a SoC of the Atmel AT91 or SMART family shall have the following +properties: + +Required root node properties: +compatible: must be one of: + * "atmel,at91rm9200" + + * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with + the specific SoC family or compatible: + o "atmel,at91sam9260" + o "atmel,at91sam9261" + o "atmel,at91sam9263" + o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific + SoC compatible: + - "atmel,at91sam9g15" + - "atmel,at91sam9g25" + - "atmel,at91sam9g35" + - "atmel,at91sam9x25" + - "atmel,at91sam9x35" + o "atmel,at91sam9g20" + o "atmel,at91sam9g45" + o "atmel,at91sam9n12" + o "atmel,at91sam9rl" + * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific + SoC family: + o "atmel,sama5d3" shall be extended with the specific SoC compatible: + - "atmel,sama5d31" + - "atmel,sama5d33" + - "atmel,sama5d34" + - "atmel,sama5d35" + - "atmel,sama5d36" + o "atmel,sama5d4" shall be extended with the specific SoC compatible: + - "atmel,sama5d41" + - "atmel,sama5d42" + - "atmel,sama5d43" + - "atmel,sama5d44" + PIT Timer required properties: - compatible: Should be "atmel,at91sam9260-pit" - reg: Should contain registers location and length @@ -61,8 +98,8 @@ - compatible: Should be "atmel,at91rm9200-sdramc", "atmel,at91sam9260-sdramc", "atmel,at91sam9g45-ddramc", + "atmel,sama5d3-ddramc", - reg: Should contain registers location and length - For at91sam9263 and at91sam9g45 you must specify 2 entries. Examples: @@ -71,12 +108,6 @@ reg = <0xffffe800 0x200>; }; - ramc0: ramc@ffffe400 { - compatible = "atmel,at91sam9g45-ddramc"; - reg = <0xffffe400 0x200 - 0xffffe600 0x200>; - }; - SHDWC Shutdown Controller required properties:
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/bcm63138.txt new file mode 100644 index 0000000..bd49987 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/bcm63138.txt
@@ -0,0 +1,9 @@ +Broadcom BCM63138 DSL System-on-a-Chip device tree bindings +----------------------------------------------------------- + +Boards compatible with the BCM63138 DSL System-on-a-Chip should have the +following properties: + +Required root node property: + +compatible: should be "brcm,bcm63138"
diff --git a/Documentation/devicetree/bindings/arm/cavium-thunder.txt b/Documentation/devicetree/bindings/arm/cavium-thunder.txt new file mode 100644 index 0000000..6f63a58 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cavium-thunder.txt
@@ -0,0 +1,10 @@ +Cavium Thunder platform device tree bindings +-------------------------------------------- + +Boards with Cavium's Thunder SoC shall have following properties. + +Root Node +--------- +Required root node properties: + + - compatible = "cavium,thunder-88xx";
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 298e2f6..fc44634 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -166,6 +166,7 @@ "arm,cortex-r5" "arm,cortex-r7" "brcm,brahma-b15" + "cavium,thunder" "faraday,fa526" "intel,sa110" "intel,sa1100" @@ -219,6 +220,12 @@ Value type: <phandle> Definition: Specifies the ACC[2] node associated with this CPU. + - cpu-idle-states + Usage: Optional + Value type: <prop-encoded-array> + Definition: + # List of phandles to idle state nodes supported + by this cpu [3]. Example 1 (dual-cluster big.LITTLE system 32-bit): @@ -415,3 +422,5 @@ -- [1] arm/msm/qcom,saw2.txt [2] arm/msm/qcom,kpss-acc.txt +[3] ARM Linux kernel documentation - idle states bindings + Documentation/devicetree/bindings/arm/idle-states.txt
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index 8b4f7b7f..abde1ea 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -8,6 +8,8 @@ * samsung,exynos4210-pd - for exynos4210 type power domain. - reg: physical base address of the controller and length of memory mapped region. +- #power-domain-cells: number of cells in power domain specifier; + must be 0. Optional Properties: - clocks: List of clock handles. The parent clocks of the input clocks to the @@ -29,6 +31,7 @@ lcd0: power-domain-lcd0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x10>; + #power-domain-cells = <0>; }; mfc_pd: power-domain@10044060 { @@ -37,12 +40,8 @@ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, <&clock CLK_MOUT_USER_ACLK333>; clock-names = "oscclk", "pclk0", "clk0"; + #power-domain-cells = <0>; }; -Example of the node using power domain: - - node { - /* ... */ - samsung,power-domain = <&lcd0>; - /* ... */ - }; +See Documentation/devicetree/bindings/power/power_domain.txt for description +of consumer-side bindings.
diff --git a/Documentation/devicetree/bindings/arm/geniatech.txt b/Documentation/devicetree/bindings/arm/geniatech.txt new file mode 100644 index 0000000..74ccba4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/geniatech.txt
@@ -0,0 +1,5 @@ +Geniatech platforms device tree bindings +------------------------------------------- + +Geniatech ATV1200 + - compatible = "geniatech,atv1200"
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 934f000..f717c7b 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -5,6 +5,11 @@ Required root node properties: - compatible = "hisilicon,hi3620-hi4511"; +HiP04 D01 Board +Required root node properties: + - compatible = "hisilicon,hip04-d01"; + + Hisilicon system controller Required properties: @@ -55,3 +60,21 @@ compatible = "hisilicon,pctrl"; reg = <0xfca09000 0x1000>; }; + +----------------------------------------------------------------------- +Fabric: + +Required Properties: +- compatible: "hisilicon,hip04-fabric"; +- reg: Address and size of Fabric + +----------------------------------------------------------------------- +Bootwrapper boot method (software protocol on SMP): + +Required Properties: +- compatible: "hisilicon,hip04-bootwrapper"; +- boot-method: Address and size of boot method. + [0]: bootwrapper physical address + [1]: bootwrapper size + [2]: relocation physical address + [3]: relocation size
diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt new file mode 100644 index 0000000..37375c7 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@@ -0,0 +1,679 @@ +========================================== +ARM idle states binding description +========================================== + +========================================== +1 - Introduction +========================================== + +ARM systems contain HW capable of managing power consumption dynamically, +where cores can be put in different low-power states (ranging from simple +wfi to power gating) according to OS PM policies. The CPU states representing +the range of dynamic idle states that a processor can enter at run-time, can be +specified through device tree bindings representing the parameters required +to enter/exit specific idle states on a given processor. + +According to the Server Base System Architecture document (SBSA, [3]), the +power states an ARM CPU can be put into are identified by the following list: + +- Running +- Idle_standby +- Idle_retention +- Sleep +- Off + +The power states described in the SBSA document define the basic CPU states on +top of which ARM platforms implement power management schemes that allow an OS +PM implementation to put the processor in different idle states (which include +states listed above; "off" state is not an idle state since it does not have +wake-up capabilities, hence it is not considered in this document). + +Idle state parameters (eg entry latency) are platform specific and need to be +characterized with bindings that provide the required information to OS PM +code so that it can build the required tables and use them at runtime. + +The device tree binding definition for ARM idle states is the subject of this +document. + +=========================================== +2 - idle-states definitions +=========================================== + +Idle states are characterized for a specific system through a set of +timing and energy related properties, that underline the HW behaviour +triggered upon idle states entry and exit. + +The following diagram depicts the CPU execution phases and related timing +properties required to enter and exit an idle state: + +..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__.. + | | | | | + + |<------ entry ------->| + | latency | + |<- exit ->| + | latency | + |<-------- min-residency -------->| + |<------- wakeup-latency ------->| + + Diagram 1: CPU idle state execution phases + +EXEC: Normal CPU execution. + +PREP: Preparation phase before committing the hardware to idle mode + like cache flushing. This is abortable on pending wake-up + event conditions. The abort latency is assumed to be negligible + (i.e. less than the ENTRY + EXIT duration). If aborted, CPU + goes back to EXEC. This phase is optional. If not abortable, + this should be included in the ENTRY phase instead. + +ENTRY: The hardware is committed to idle mode. This period must run + to completion up to IDLE before anything else can happen. + +IDLE: This is the actual energy-saving idle period. This may last + between 0 and infinite time, until a wake-up event occurs. + +EXIT: Period during which the CPU is brought back to operational + mode (EXEC). + +entry-latency: Worst case latency required to enter the idle state. The +exit-latency may be guaranteed only after entry-latency has passed. + +min-residency: Minimum period, including preparation and entry, for a given +idle state to be worthwhile energywise. + +wakeup-latency: Maximum delay between the signaling of a wake-up event and the +CPU being able to execute normal code again. If not specified, this is assumed +to be entry-latency + exit-latency. + +These timing parameters can be used by an OS in different circumstances. + +An idle CPU requires the expected min-residency time to select the most +appropriate idle state based on the expected expiry time of the next IRQ +(ie wake-up) that causes the CPU to return to the EXEC phase. + +An operating system scheduler may need to compute the shortest wake-up delay +for CPUs in the system by detecting how long will it take to get a CPU out +of an idle state, eg: + +wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0) + +In other words, the scheduler can make its scheduling decision by selecting +(eg waking-up) the CPU with the shortest wake-up latency. +The wake-up latency must take into account the entry latency if that period +has not expired. The abortable nature of the PREP period can be ignored +if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than +the worst case since it depends on the CPU operating conditions, ie caches +state). + +An OS has to reliably probe the wakeup-latency since some devices can enforce +latency constraints guarantees to work properly, so the OS has to detect the +worst case wake-up latency it can incur if a CPU is allowed to enter an +idle state, and possibly to prevent that to guarantee reliable device +functioning. + +The min-residency time parameter deserves further explanation since it is +expressed in time units but must factor in energy consumption coefficients. + +The energy consumption of a cpu when it enters a power state can be roughly +characterised by the following graph: + + | + | + | + e | + n | /--- + e | /------ + r | /------ + g | /----- + y | /------ + | ---- + | /| + | / | + | / | + | / | + | / | + | / | + |/ | + -----|-------+---------------------------------- + 0| 1 time(ms) + + Graph 1: Energy vs time example + +The graph is split in two parts delimited by time 1ms on the X-axis. +The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope +and denotes the energy costs incurred whilst entering and leaving the idle +state. +The graph curve in the area delimited by X-axis values = {x | x > 1ms } has +shallower slope and essentially represents the energy consumption of the idle +state. + +min-residency is defined for a given idle state as the minimum expected +residency time for a state (inclusive of preparation and entry) after +which choosing that state become the most energy efficient option. A good +way to visualise this, is by taking the same graph above and comparing some +states energy consumptions plots. + +For sake of simplicity, let's consider a system with two idle states IDLE1, +and IDLE2: + + | + | + | + | /-- IDLE1 + e | /--- + n | /---- + e | /--- + r | /-----/--------- IDLE2 + g | /-------/--------- + y | ------------ /---| + | / /---- | + | / /--- | + | / /---- | + | / /--- | + | --- | + | / | + | / | + |/ | time + ---/----------------------------+------------------------ + |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy + | + IDLE2-min-residency + + Graph 2: idle states min-residency example + +In graph 2 above, that takes into account idle states entry/exit energy +costs, it is clear that if the idle state residency time (ie time till next +wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state +choice energywise. + +This is mainly down to the fact that IDLE1 entry/exit energy costs are lower +than IDLE2. + +However, the lower power consumption (ie shallower energy curve slope) of idle +state IDLE2 implies that after a suitable time, IDLE2 becomes more energy +efficient. + +The time at which IDLE2 becomes more energy efficient than IDLE1 (and other +shallower states in a system with multiple idle states) is defined +IDLE2-min-residency and corresponds to the time when energy consumption of +IDLE1 and IDLE2 states breaks even. + +The definitions provided in this section underpin the idle states +properties specification that is the subject of the following sections. + +=========================================== +3 - idle-states node +=========================================== + +ARM processor idle states are defined within the idle-states node, which is +a direct child of the cpus node [1] and provides a container where the +processor idle states, defined as device tree nodes, are listed. + +- idle-states node + + Usage: Optional - On ARM systems, it is a container of processor idle + states nodes. If the system does not provide CPU + power management capabilities or the processor just + supports idle_standby an idle-states node is not + required. + + Description: idle-states node is a container node, where its + subnodes describe the CPU idle states. + + Node name must be "idle-states". + + The idle-states node's parent node must be the cpus node. + + The idle-states node's child nodes can be: + + - one or more state nodes + + Any other configuration is considered invalid. + + An idle-states node defines the following properties: + + - entry-method + Value type: <stringlist> + Usage and definition depend on ARM architecture version. + # On ARM v8 64-bit this property is required and must + be one of: + - "psci" (see bindings in [2]) + # On ARM 32-bit systems this property is optional + +The nodes describing the idle states (state) can only be defined within the +idle-states node, any other configuration is considered invalid and therefore +must be ignored. + +=========================================== +4 - state node +=========================================== + +A state node represents an idle state description and must be defined as +follows: + +- state node + + Description: must be child of the idle-states node + + The state node name shall follow standard device tree naming + rules ([5], 2.2.1 "Node names"), in particular state nodes which + are siblings within a single common parent must be given a unique name. + + The idle state entered by executing the wfi instruction (idle_standby + SBSA,[3][4]) is considered standard on all ARM platforms and therefore + must not be listed. + + With the definitions provided above, the following list represents + the valid properties for a state node: + + - compatible + Usage: Required + Value type: <stringlist> + Definition: Must be "arm,idle-state". + + - local-timer-stop + Usage: See definition + Value type: <none> + Definition: if present the CPU local timer control logic is + lost on state entry, otherwise it is retained. + + - entry-latency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency in + microseconds required to enter the idle state. + The exit-latency-us duration may be guaranteed + only after entry-latency-us has passed. + + - exit-latency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency + in microseconds required to exit the idle state. + + - min-residency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing minimum residency duration + in microseconds, inclusive of preparation and + entry, for this idle state to be considered + worthwhile energy wise (refer to section 2 of + this document for a complete description). + + - wakeup-latency-us: + Usage: Optional + Value type: <prop-encoded-array> + Definition: u32 value representing maximum delay between the + signaling of a wake-up event and the CPU being + able to execute normal code again. If omitted, + this is assumed to be equal to: + + entry-latency-us + exit-latency-us + + It is important to supply this value on systems + where the duration of PREP phase (see diagram 1, + section 2) is non-neglibigle. + In such systems entry-latency-us + exit-latency-us + will exceed wakeup-latency-us by this duration. + + In addition to the properties listed above, a state node may require + additional properties specifics to the entry-method defined in the + idle-states node, please refer to the entry-method bindings + documentation for properties definitions. + +=========================================== +4 - Examples +=========================================== + +Example 1 (ARM 64-bit, 16-cpu system, PSCI enable-method): + +cpus { + #size-cells = <0>; + #address-cells = <2>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + CPU2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + CPU3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + CPU4: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + CPU5: cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + CPU6: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + CPU7: cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0 + &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>; + }; + + CPU8: cpu@100000000 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + CPU9: cpu@100000001 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + CPU10: cpu@100000100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + CPU11: cpu@100000101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + CPU12: cpu@100010000 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + CPU13: cpu@100010001 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + CPU14: cpu@100010100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + CPU15: cpu@100010101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1 0x10101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0 + &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>; + }; + + idle-states { + entry-method = "arm,psci"; + + CPU_RETENTION_0_0: cpu-retention-0-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <80>; + }; + + CLUSTER_RETENTION_0: cluster-retention-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <250>; + wakeup-latency-us = <130>; + }; + + CPU_SLEEP_0_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <250>; + exit-latency-us = <500>; + min-residency-us = <950>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <600>; + exit-latency-us = <1100>; + min-residency-us = <2700>; + wakeup-latency-us = <1500>; + }; + + CPU_RETENTION_1_0: cpu-retention-1-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <90>; + }; + + CLUSTER_RETENTION_1: cluster-retention-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <50>; + exit-latency-us = <100>; + min-residency-us = <270>; + wakeup-latency-us = <100>; + }; + + CPU_SLEEP_1_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <70>; + exit-latency-us = <100>; + min-residency-us = <300>; + wakeup-latency-us = <150>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <500>; + exit-latency-us = <1200>; + min-residency-us = <3500>; + wakeup-latency-us = <1300>; + }; + }; + +}; + +Example 2 (ARM 32-bit, 8-cpu system, two clusters): + +cpus { + #size-cells = <0>; + #address-cells = <1>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>; + }; + + idle-states { + CPU_SLEEP_0_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <200>; + exit-latency-us = <100>; + min-residency-us = <400>; + wakeup-latency-us = <250>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <500>; + exit-latency-us = <1500>; + min-residency-us = <2500>; + wakeup-latency-us = <1700>; + }; + + CPU_SLEEP_1_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <500>; + min-residency-us = <900>; + wakeup-latency-us = <600>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <800>; + exit-latency-us = <2000>; + min-residency-us = <6500>; + wakeup-latency-us = <2300>; + }; + }; + +}; + +=========================================== +5 - References +=========================================== + +[1] ARM Linux Kernel documentation - CPUs bindings + Documentation/devicetree/bindings/arm/cpus.txt + +[2] ARM Linux Kernel documentation - PSCI bindings + Documentation/devicetree/bindings/arm/psci.txt + +[3] ARM Server Base System Architecture (SBSA) + http://infocenter.arm.com/help/index.jsp + +[4] ARM Architecture Reference Manuals + http://infocenter.arm.com/help/index.jsp + +[5] ePAPR standard + https://www.power.org/documentation/epapr-version-1-1/
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index af527ee..292ef7c 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -2,6 +2,10 @@ ARM cores often have a separate level 2 cache controller. There are various implementations of the L2 cache controller with compatible programming models. +Some of the properties that are just prefixed "cache-*" are taken from section +3.7.3 of the ePAPR v1.1 specification which can be found at: +https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf + The ARM L2 cache representation in the device tree should be done as follows: Required properties: @@ -44,6 +48,12 @@ I/O coherent mode. Valid only when the arm,pl310-cache compatible string is used. - interrupts : 1 combined interrupt. +- cache-size : specifies the size in bytes of the cache +- cache-sets : specifies the number of associativity sets of the cache +- cache-block-size : specifies the size in bytes of a cache block +- cache-line-size : specifies the size in bytes of a line in the cache, + if this is not specified, the line size is assumed to be equal to the + cache block size - cache-id-part: cache id part number to be used if it is not present on hardware - wt-override: If present then L2 is forced to Write through mode
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index d6ac71f..fa25226 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -6,3 +6,9 @@ compatible: must contain "mediatek,mt6589" + +Supported boards: + +- bq Aquaris5 smart phone: + Required root node properties: + - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt index 83f405b..763695d 100644 --- a/Documentation/devicetree/bindings/arm/omap/mpu.txt +++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -10,6 +10,9 @@ Should be "ti,omap5-mpu" for OMAP5 - ti,hwmods: "mpu" +Optional properties: +- sram: Phandle to the ocmcram node + Examples: - For an OMAP5 SMP system:
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 0edc903..ddd9bcd 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -85,6 +85,18 @@ - DRA722 compatible = "ti,dra722", "ti,dra72", "ti,dra7" +- AM5728 + compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" + +- AM5726 + compatible = "ti,am5726", "ti,dra742", "ti,dra74", "ti,dra7" + +- AM5718 + compatible = "ti,am5718", "ti,dra722", "ti,dra72", "ti,dra7" + +- AM5716 + compatible = "ti,am5716", "ti,dra722", "ti,dra72", "ti,dra7" + - AM4372 compatible = "ti,am4372", "ti,am43"
diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt index b4a58f3..5aa40ed 100644 --- a/Documentation/devicetree/bindings/arm/psci.txt +++ b/Documentation/devicetree/bindings/arm/psci.txt
@@ -50,6 +50,16 @@ - migrate : Function ID for MIGRATE operation +Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie idle +state nodes, as per bindings in [1]) must specify the following properties: + +- arm,psci-suspend-param + Usage: Required for state nodes[1] if the corresponding + idle-states node entry-method property is set + to "psci". + Value type: <u32> + Definition: power_state parameter to pass to the PSCI + suspend call. Example: @@ -64,7 +74,6 @@ migrate = <0x95c10003>; }; - Case 2: PSCI v0.2 only psci { @@ -88,3 +97,6 @@ ... }; + +[1] Kernel documentation - ARM idle states bindings + Documentation/devicetree/bindings/arm/idle-states.txt
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index adc61b0..709efaa 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -11,13 +11,25 @@ Required properties: - compatible: Must be "samsung,exynos-adc-v1" - for exynos4412/5250 controllers. + for exynos4412/5250 and s5pv210 controllers. Must be "samsung,exynos-adc-v2" for future controllers. Must be "samsung,exynos3250-adc" for controllers compatible with ADC of Exynos3250. -- reg: Contains ADC register address range (base address and - length) and the address of the phy enable register. + Must be "samsung,s3c2410-adc" for + the ADC in s3c2410 and compatibles + Must be "samsung,s3c2416-adc" for + the ADC in s3c2416 and compatibles + Must be "samsung,s3c2440-adc" for + the ADC in s3c2440 and compatibles + Must be "samsung,s3c2443-adc" for + the ADC in s3c2443 and compatibles + Must be "samsung,s3c6410-adc" for + the ADC in s3c6410 and compatibles +- reg: List of ADC register address range + - The base address and range of ADC register + - The base address and range of ADC_PHY register (every + SoC except for s3c24xx/s3c64xx ADC) - interrupts: Contains the interrupt information for the timer. The format is being dependent on which interrupt controller the Samsung device uses.
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt new file mode 100644 index 0000000..51147cb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -0,0 +1,71 @@ +Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings +-------------------------------------------------------------------- + +SoCs: + + - Emma Mobile EV2 + compatible = "renesas,emev2" + - RZ/A1H (R7S72100) + compatible = "renesas,r7s72100" + - SH-Mobile AP4 (R8A73720/SH7372) + compatible = "renesas,sh7372" + - SH-Mobile AG5 (R8A73A00/SH73A0) + compatible = "renesas,sh73a0" + - R-Mobile APE6 (R8A73A40) + compatible = "renesas,r8a73a4" + - R-Mobile A1 (R8A77400) + compatible = "renesas,r8a7740" + - R-Car M1A (R8A77781) + compatible = "renesas,r8a7778" + - R-Car H1 (R8A77790) + compatible = "renesas,r8a7779" + - R-Car H2 (R8A77900) + compatible = "renesas,r8a7790" + - R-Car M2-W (R8A77910) + compatible = "renesas,r8a7791" + - R-Car V2H (R8A77920) + compatible = "renesas,r8a7792" + - R-Car M2-N (R8A77930) + compatible = "renesas,r8a7793" + - R-Car E2 (R8A77940) + compatible = "renesas,r8a7794" + + +Boards: + + - Alt + compatible = "renesas,alt", "renesas,r8a7794" + - APE6-EVM + compatible = "renesas,ape6evm", "renesas,r8a73a4" + - APE6-EVM - Reference Device Tree Implementation + compatible = "renesas,ape6evm-reference", "renesas,r8a73a4" + - Atmark Techno Armadillo-800 EVA + compatible = "renesas,armadillo800eva" + - BOCK-W + compatible = "renesas,bockw", "renesas,r8a7778" + - BOCK-W - Reference Device Tree Implementation + compatible = "renesas,bockw-reference", "renesas,r8a7778" + - Genmai (RTK772100BC00000BR) + compatible = "renesas,genmai", "renesas,r7s72100" + - Gose + compatible = "renesas,gose", "renesas,r8a7793" + - Henninger + compatible = "renesas,henninger", "renesas,r8a7791" + - Koelsch (RTP0RC7791SEB00010S) + compatible = "renesas,koelsch", "renesas,r8a7791" + - Kyoto Microcomputer Co. KZM-A9-Dual + compatible = "renesas,kzm9d", "renesas,emev2" + - Kyoto Microcomputer Co. KZM-A9-GT + compatible = "renesas,kzm9g", "renesas,sh73a0" + - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation + compatible = "renesas,kzm9g-reference", "renesas,sh73a0" + - Lager (RTP0RC7790SEB00010S) + compatible = "renesas,lager", "renesas,r8a7790" + - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd) + compatible = "renesas,mackerel" + - Marzen + compatible = "renesas,marzen", "renesas,r8a7779" + +Note: Reference Device Tree Implementations are temporary implementations + to ease the migration from platform devices to Device Tree, and are + intended to be removed in the future.
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt new file mode 100644 index 0000000..ccf0addd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
@@ -0,0 +1,12 @@ +NVIDIA Tegra Flow Controller + +Required properties: +- compatible: Should be "nvidia,tegra<chip>-flowctrl" +- reg: Should contain one register range (address and length) + +Example: + + flow-controller@60007000 { + compatible = "nvidia,tegra20-flowctrl"; + reg = <0x60007000 0x1000>; + };
diff --git a/Documentation/devicetree/bindings/ata/qcom-sata.txt b/Documentation/devicetree/bindings/ata/qcom-sata.txt new file mode 100644 index 0000000..094de91 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/qcom-sata.txt
@@ -0,0 +1,48 @@ +* Qualcomm AHCI SATA Controller + +SATA nodes are defined to describe on-chip Serial ATA controllers. +Each SATA controller should have its own node. + +Required properties: +- compatible : compatible list, must contain "generic-ahci" +- interrupts : <interrupt mapping for SATA IRQ> +- reg : <registers mapping> +- phys : Must contain exactly one entry as specified + in phy-bindings.txt +- phy-names : Must be "sata-phy" + +Required properties for "qcom,ipq806x-ahci" compatible: +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Shall be: + "slave_iface" - Fabric port AHB clock for SATA + "iface" - AHB clock + "core" - core clock + "rxoob" - RX out-of-band clock + "pmalive" - Power Module Alive clock +- assigned-clocks : Shall be: + SATA_RXOOB_CLK + SATA_PMALIVE_CLK +- assigned-clock-rates : Shall be: + 100Mhz (100000000) for SATA_RXOOB_CLK + 100Mhz (100000000) for SATA_PMALIVE_CLK + +Example: + sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + interrupts = <0 209 0x0>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_iface", "iface", "core", + "rxoob", "pmalive"; + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + };
diff --git a/Documentation/devicetree/bindings/bus/bcma.txt b/Documentation/devicetree/bindings/bus/bcma.txt new file mode 100644 index 0000000..62a4834 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/bcma.txt
@@ -0,0 +1,32 @@ +Driver for ARM AXI Bus with Broadcom Plugins (bcma) + +Required properties: + +- compatible : brcm,bus-axi + +- reg : iomem address range of chipcommon core + +The cores on the AXI bus are automatically detected by bcma with the +memory ranges they are using and they get registered afterwards. + +The top-level axi bus may contain children representing attached cores +(devices). This is needed since some hardware details can't be auto +detected (e.g. IRQ numbers). Also some of the cores may be responsible +for extra things, e.g. ChipCommon providing access to the GPIO chip. + +Example: + + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; + ranges = <0x00000000 0x18000000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + chipcommon { + reg = <0x00000000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + }; + };
diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt index ecc6952..11f5f95 100644 --- a/Documentation/devicetree/bindings/clock/arm-integrator.txt +++ b/Documentation/devicetree/bindings/clock/arm-integrator.txt
@@ -1,6 +1,6 @@ Clock bindings for ARM Integrator and Versatile Core Module clocks -Auxilary Oscillator Clock +Auxiliary Oscillator Clock This is a configurable clock fed from a 24 MHz chrystal, used for generating e.g. video clocks. It is located on the
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index b3d544c..7a4d492 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -74,6 +74,9 @@ "atmel,at91sam9x5-clk-utmi": at91 utmi clock + "atmel,sama5d4-clk-h32mx": + at91 h32mx clock + Required properties for SCKC node: - reg : defines the IO memory reserved for the SCKC. - #size-cells : shall be 0 (reg is used to encode clk id). @@ -447,3 +450,14 @@ #clock-cells = <0>; clocks = <&main>; }; + +Required properties for 32 bits bus Matrix clock (h32mx clock): +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the master clock source phandle. + +For example: + h32ck: h32mxck { + #clock-cells = <0>; + compatible = "atmel,sama5d4-clk-h32mx"; + clocks = <&mck>; + };
diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt index aadc9c5..f57d9dd 100644 --- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
@@ -7,6 +7,8 @@ - compatible: should be one of the following. - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC. + - "samsung,exynos3250-cmu-dmc" - controller compatible with + Exynos3250 SoC for Dynamic Memory Controller domain. - reg: physical base address of the controller and length of memory mapped region. @@ -20,7 +22,7 @@ dt-bindings/clock/exynos3250.h header and can be used in device tree sources. -Example 1: An example of a clock controller node is listed below. +Example 1: Examples of clock controller nodes are listed below. cmu: clock-controller@10030000 { compatible = "samsung,exynos3250-cmu"; @@ -28,6 +30,12 @@ #clock-cells = <1>; }; + cmu_dmc: clock-controller@105C0000 { + compatible = "samsung,exynos3250-cmu-dmc"; + reg = <0x105C0000 0x2000>; + #clock-cells = <1>; + }; + Example 2: UART controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property.
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt new file mode 100644 index 0000000..d3379ff --- /dev/null +++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
@@ -0,0 +1,21 @@ +Binding for simple gpio gated clock. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "gpio-gate-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- enable-gpios : GPIO reference for enabling and disabling the clock. + +Optional properties: +- clocks: Maximum of one parent clock is supported. + +Example: + clock { + compatible = "gpio-gate-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + };
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 96ce71b..9c40739 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -9,13 +9,21 @@ Following properties should be presend in main device node of the MFD chip. Required properties: -- #clock-cells: simple one-cell clock specifier format is used, where the - only cell is used as an index of the clock inside the provider. Following - indices are allowed: + +- #clock-cells: from common clock binding; shall be set to 1. + +Optional properties: +- clock-output-names: From common clock binding. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Following indices are allowed: - 0: 32khz_ap clock, - 1: 32khz_cp clock, - 2: 32khz_pmic clock. +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h +header and can be used in device tree sources. + Example: Node of the MFD chip max77686: max77686@09 { @@ -34,5 +42,5 @@ compatible = "bar,foo"; /* ... */ clock-names = "my-clock"; - clocks = <&max77686 2>; + clocks = <&max77686 MAX77686_CLK_PMIC>; };
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt new file mode 100644 index 0000000..c6dc783 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
@@ -0,0 +1,44 @@ +Binding for Maxim MAX77802 32k clock generator block + +This is a part of device tree bindings of MAX77802 multi-function device. +More information can be found in bindings/mfd/max77802.txt file. + +The MAX77802 contains two 32.768khz clock outputs that can be controlled +(gated/ungated) over I2C. + +Following properties should be present in main device node of the MFD chip. + +Required properties: +- #clock-cells: From common clock binding; shall be set to 1. + +Optional properties: +- clock-output-names: From common clock binding. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Following indices are allowed: + - 0: 32khz_ap clock, + - 1: 32khz_cp clock. + +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77802.h +header and can be used in device tree sources. + +Example: Node of the MFD chip + + max77802: max77802@09 { + compatible = "maxim,max77802"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 0>; + reg = <0x09>; + #clock-cells = <1>; + + /* ... */ + }; + +Example: Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "my-clock"; + clocks = <&max77802 MAX77802_CLK_32K_AP>; + };
diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt new file mode 100644 index 0000000..4b4a902 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt
@@ -0,0 +1,16 @@ +* Clock bindings for Marvell PXA chips + +Required properties: +- compatible: Should be "marvell,pxa-clocks" +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell (see include/.../pxa-clock.h). + +Examples: + +pxa2xx_clks: pxa2xx_clks@41300004 { + compatible = "marvell,pxa-clocks"; + #clock-cells = <1>; + status = "okay"; +};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt index 8a92b5f..a5f5223 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -11,9 +11,12 @@ - compatible: Must be one of the following - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks + - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks + - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks + - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks - "renesas,cpg-mstp-clock" for generic MSTP gate clocks - reg: Base address and length of the I/O mapped registers used by the MSTP clocks. The first register is the clock control register and is mandatory.
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt index 7b41c2f..e6ad35b 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -8,6 +8,7 @@ - compatible: Must be one of - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG + - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG - reg: Base address and length of the memory resource used by the CPG
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index d3a5c3c..ed116df 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -46,7 +46,11 @@ "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31 "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 + "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 + "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10 + "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks + "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt deleted file mode 100644 index 366690c..0000000 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +++ /dev/null
@@ -1,64 +0,0 @@ -Generic CPU0 cpufreq driver - -It is a generic cpufreq driver for CPU0 frequency management. It -supports both uniprocessor (UP) and symmetric multiprocessor (SMP) -systems which share clock and voltage across all CPUs. - -Both required and optional properties listed below must be defined -under node /cpus/cpu@0. - -Required properties: -- None - -Optional properties: -- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for - details. OPPs *must* be supplied either via DT, i.e. this property, or - populated at runtime. -- clock-latency: Specify the possible maximum transition latency for clock, - in unit of nanoseconds. -- voltage-tolerance: Specify the CPU voltage tolerance in percentage. -- #cooling-cells: -- cooling-min-level: -- cooling-max-level: - Please refer to Documentation/devicetree/bindings/thermal/thermal.txt. - -Examples: - -cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a9"; - reg = <0>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 1100000 - 396000 950000 - 198000 850000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <2>; - }; - - cpu@1 { - compatible = "arm,cortex-a9"; - reg = <1>; - next-level-cache = <&L2>; - }; - - cpu@2 { - compatible = "arm,cortex-a9"; - reg = <2>; - next-level-cache = <&L2>; - }; - - cpu@3 { - compatible = "arm,cortex-a9"; - reg = <3>; - next-level-cache = <&L2>; - }; -};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt new file mode 100644 index 0000000..e41c98f --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
@@ -0,0 +1,64 @@ +Generic cpufreq driver + +It is a generic DT based cpufreq driver for frequency management. It supports +both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share +clock and voltage across all CPUs. + +Both required and optional properties listed below must be defined +under node /cpus/cpu@0. + +Required properties: +- None + +Optional properties: +- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for + details. OPPs *must* be supplied either via DT, i.e. this property, or + populated at runtime. +- clock-latency: Specify the possible maximum transition latency for clock, + in unit of nanoseconds. +- voltage-tolerance: Specify the CPU voltage tolerance in percentage. +- #cooling-cells: +- cooling-min-level: +- cooling-max-level: + Please refer to Documentation/devicetree/bindings/thermal/thermal.txt. + +Examples: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; +};
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt index c0a20cd..baf8a3c 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
@@ -1,5 +1,5 @@ SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM). -Currently Freescale powerpc chip C29X is embeded with SEC 6. +Currently Freescale powerpc chip C29X is embedded with SEC 6. SEC 6 device tree binding include: -SEC 6 Node -Job Ring Node
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt new file mode 100644 index 0000000..9bcab91 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
@@ -0,0 +1,62 @@ +QCOM ADM DMA Controller + +Required properties: +- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960 +- reg: Address range for DMA registers +- interrupts: Should contain one interrupt shared by all channels +- #dma-cells: must be <2>. First cell denotes the channel number. Second cell + denotes CRCI (client rate control interface) flow control assignment. +- clocks: Should contain the core clock and interface clock. +- clock-names: Must contain "core" for the core clock and "iface" for the + interface clock. +- resets: Must contain an entry for each entry in reset names. +- reset-names: Must include the following entries: + - clk + - c0 + - c1 + - c2 +- qcom,ee: indicates the security domain identifier used in the secure world. + +Example: + adm_dma: dma@18300000 { + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <0 170 0>; + #dma-cells = <2>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc ADM0_RESET>, + <&gcc ADM0_C0_RESET>, + <&gcc ADM0_C1_RESET>, + <&gcc ADM0_C2_RESET>; + reset-names = "clk", "c0", "c1", "c2"; + qcom,ee = <0>; + }; + +DMA clients must use the format descripted in the dma.txt file, using a three +cell specifier for each channel. + +Each dmas request consists of 3 cells: + 1. phandle pointing to the DMA controller + 2. channel number + 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0. + The CRCI is used for flow control. It identifies the peripheral device that + is the source/destination for the transferred data. + +Example: + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + dmas = <&adm_dma 6 9>, + <&adm_dma 5 10>; + dma-names = "rx", "tx"; + };
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt new file mode 100644 index 0000000..2291c40 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -0,0 +1,65 @@ +Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream +target devices. It can be configured to have one channel or two channels. +If configured as two channels, one is to transmit to the device and another +is to receive from the device. + +Required properties: +- compatible: Should be "xlnx,axi-dma-1.00.a" +- #dma-cells: Should be <1>, see "dmas" property below +- reg: Should contain DMA registers location and length. +- dma-channel child node: Should have atleast one channel and can have upto + two channels per device. This node specifies the properties of each + DMA channel (see child node properties below). + +Optional properties: +- xlnx,include-sg: Tells whether configured for Scatter-mode in + the hardware. + +Required child node properties: +- compatible: It should be either "xlnx,axi-dma-mm2s-channel" or + "xlnx,axi-dma-s2mm-channel". +- interrupts: Should contain per channel DMA interrupts. +- xlnx,datawidth: Should contain the stream data width, take values + {32,64...1024}. + +Option child node properties: +- xlnx,include-dre: Tells whether hardware is configured for Data + Realignment Engine. + +Example: +++++++++ + +axi_dma_0: axidma@40400000 { + compatible = "xlnx,axi-dma-1.00.a"; + #dma_cells = <1>; + reg = < 0x40400000 0x10000 >; + dma-channel@40400000 { + compatible = "xlnx,axi-dma-mm2s-channel"; + interrupts = < 0 59 4 >; + xlnx,datawidth = <0x40>; + } ; + dma-channel@40400030 { + compatible = "xlnx,axi-dma-s2mm-channel"; + interrupts = < 0 58 4 >; + xlnx,datawidth = <0x40>; + } ; +} ; + + +* DMA client + +Required properties: +- dmas: a list of <[DMA device phandle] [Channel ID]> pairs, + where Channel ID is '0' for write/tx and '1' for read/rx + channel. +- dma-names: a list of DMA channel names, one per "dmas" entry + +Example: +++++++++ + +dmatest_0: dmatest@0 { + compatible ="xlnx,axi-dma-test-1.00.a"; + dmas = <&axi_dma_0 0 + &axi_dma_0 1>; + dma-names = "dma0", "dma1"; +} ;
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/panel.txt b/Documentation/devicetree/bindings/drm/tilcdc/panel.txt index 9301c33..4ab9e23 100644 --- a/Documentation/devicetree/bindings/drm/tilcdc/panel.txt +++ b/Documentation/devicetree/bindings/drm/tilcdc/panel.txt
@@ -18,6 +18,10 @@ Documentation/devicetree/bindings/video/display-timing.txt for display timing binding details. +Optional properties: +- backlight: phandle of the backlight device attached to the panel +- enable-gpios: GPIO pin to enable or disable the panel + Recommended properties: - pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing properly for pins that connect to TFP410 device @@ -29,6 +33,9 @@ compatible = "ti,tilcdc,panel"; pinctrl-names = "default"; pinctrl-0 = <&bone_lcd3_cape_lcd_pins>; + backlight = <&backlight>; + enable-gpios = <&gpio3 19 0>; + panel-info { ac-bias = <255>; ac-bias-intrpt = <0>;
diff --git a/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt new file mode 100644 index 0000000..6dede7d --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
@@ -0,0 +1,25 @@ + +* Richtek RT8973A - Micro USB Switch device + +The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A +is a USB port accessory detector and switch that is optimized to protect low +voltage system from abnormal high input voltage (up to 28V) and supports high +speed USB operation. Also, RT8973A support 'auto-configuration' mode. +If auto-configuration mode is enabled, RT8973A would control internal h/w patch +for USB D-/D+ switching. + +Required properties: +- compatible: Should be "richtek,rt8973a-muic" +- reg: Specifies the I2C slave address of the MUIC block. It should be 0x14 +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from rt8973a are delivered to. +- interrupts: Interrupt specifiers for detection interrupt sources. + +Example: + + rt8973a@14 { + compatible = "richtek,rt8973a-muic"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + reg = <0x14>; + };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt new file mode 100644 index 0000000..6c7e6c7 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
@@ -0,0 +1,39 @@ +Keystone 2 DSP GPIO controller bindings + +HOST OS userland running on ARM can send interrupts to DSP cores using +the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core. +This is one of the component used by the IPC mechanism used on Keystone SOCs. + +For example TCI6638K2K SoC has 8 DSP GPIO controllers: + - 8 for C66x CorePacx CPUs 0-7 + +Keystone 2 DSP GPIO controller has specific features: +- each GPIO can be configured only as output pin; +- setting GPIO value to 1 causes IRQ generation on target DSP core; +- reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still + pending. + +Required Properties: +- compatible: should be "ti,keystone-dsp-gpio" +- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to + access device state control registers and the offset of device's specific + registers within device state control registers range. +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Should be 2. + +Please refer to gpio.txt in this directory for details of the common GPIO +bindings used by client devices. + +Example: + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + ti,syscon-dev = <&devctrl 0x240>; + gpio-controller; + #gpio-cells = <2>; + }; + + dsp0: dsp0 { + compatible = "linux,rproc-user"; + ... + kick-gpio = <&dspgpio0 27>; + };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt new file mode 100644 index 0000000..b9a42f2 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
@@ -0,0 +1,39 @@ +* NXP PCA953x I2C GPIO multiplexer + +Required properties: + - compatible: Has to contain one of the following: + nxp,pca9505 + nxp,pca9534 + nxp,pca9535 + nxp,pca9536 + nxp,pca9537 + nxp,pca9538 + nxp,pca9539 + nxp,pca9554 + nxp,pca9555 + nxp,pca9556 + nxp,pca9557 + nxp,pca9574 + nxp,pca9575 + nxp,pca9698 + maxim,max7310 + maxim,max7312 + maxim,max7313 + maxim,max7315 + ti,pca6107 + ti,tca6408 + ti,tca6416 + ti,tca6424 + exar,xra1202 + +Example: + + + gpio@20 { + compatible = "nxp,pca9505"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9505>; + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-restart.txt b/Documentation/devicetree/bindings/gpio/gpio-restart.txt new file mode 100644 index 0000000..af3701b --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-restart.txt
@@ -0,0 +1,54 @@ +Drive a GPIO line that can be used to restart the system from a restart +handler. + +This binding supports level and edge triggered reset. At driver load +time, the driver will request the given gpio line and install a restart +handler. If the optional properties 'open-source' is not found, the GPIO line +will be driven in the inactive state. Otherwise its not driven until +the restart is initiated. + +When the system is restarted, the restart handler will be invoked in +priority order. The gpio is configured as an output, and driven active, +triggering a level triggered reset condition. This will also cause an +inactive->active edge condition, triggering positive edge triggered +reset. After a delay specified by active-delay, the GPIO is set to +inactive, thus causing an active->inactive edge, triggering negative edge +triggered reset. After a delay specified by inactive-delay, the GPIO +is driven active again. After a delay specified by wait-delay, the +restart handler completes allowing other restart handlers to be attempted. + +Required properties: +- compatible : should be "gpio-restart". +- gpios : The GPIO to set high/low, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be + low to reset the board set it to "Active Low", otherwise set + gpio to "Active High". + +Optional properties: +- open-source : Treat the GPIO as being open source and defer driving + it to when the restart is initiated. If this optional property is not + specified, the GPIO is initialized as an output in its inactive state. +- priority : A priority ranging from 0 to 255 (default 128) according to + the following guidelines: + 0: Restart handler of last resort, with limited restart + capabilities + 128: Default restart handler; use if no other restart handler is + expected to be available, and/or if restart functionality is + sufficient to restart the entire system + 255: Highest priority restart handler, will preempt all other + restart handlers +- active-delay: Delay (default 100) to wait after driving gpio active [ms] +- inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms] +- wait-delay: Delay (default 3000) to wait after completing restart + sequence [ms] + +Examples: + +gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 4 0>; + priority = <128>; + active-delay = <100>; + inactive-delay = <100>; + wait-delay = <3000>; +};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt new file mode 100644 index 0000000..86dbb05 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt
@@ -0,0 +1,22 @@ +APM X-Gene SoC GPIO controller bindings + +This is a gpio controller that is part of the flash controller. +This gpio controller controls a total of 48 gpios. + +Required properties: +- compatible: "apm,xgene-gpio" for X-Gene GPIO controller +- reg: Physical base address and size of the controller's registers +- #gpio-cells: Should be two. + - first cell is the pin number + - second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low +- gpio-controller: Marks the device node as a GPIO controller. + +Example: + gpio0: gpio0@1701c000 { + compatible = "apm,xgene-gpio"; + reg = <0x0 0x1701c000 0x0 0x40>; + gpio-controller; + #gpio-cells = <2>; + };
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 6641626..b2afdb2 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -19,7 +19,7 @@ - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be one. It is the pin number. -Example: +Example for a MMP platform: gpio: gpio@d4019000 { compatible = "marvell,mmp-gpio"; @@ -32,6 +32,19 @@ #interrupt-cells = <1>; }; +Example for a PXA3xx platform: + + gpio: gpio@40e00000 { + compatible = "intel,pxa3xx-gpio"; + reg = <0x40e00000 0x10000>; + interrupt-names = "gpio0", "gpio1", "gpio_mux"; + interrupts = <8 9 10>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; + * Marvell Orion GPIO Controller Required properties:
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index 2391e5c..fcca8e7 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
@@ -25,6 +25,9 @@ - "io-channels" Channel node of ADC to be used for conversion. +Optional node properties: +- "#thermal-sensor-cells" Used to expose itself to thermal fw. + Read more about iio bindings at Documentation/devicetree/bindings/iio/iio-bindings.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt new file mode 100644 index 0000000..2296d78 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
@@ -0,0 +1,30 @@ +LSI Axxia I2C + +Required properties : +- compatible : Must be "lsi,api2c" +- reg : Offset and length of the register set for the device +- interrupts : the interrupt specifier +- #address-cells : Must be <1>; +- #size-cells : Must be <0>; +- clock-names : Must contain "i2c". +- clocks: Must contain an entry for each name in clock-names. See the common + clock bindings. + +Optional properties : +- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. As only Normal and Fast modes + are supported, possible values are 100000 and 400000. + +Example : + +i2c@02010084000 { + compatible = "lsi,api2c"; + device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20 0x10084000 0x00 0x1000>; + interrupts = <0 19 4>; + clocks = <&clk_per>; + clock-names = "i2c"; + clock-frequency = <400000>; +};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt index d4745e3..2dbc0b6 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
@@ -12,6 +12,8 @@ on Exynos5250 and Exynos5420 SoCs. -> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available on Exynos5260 SoCs. + -> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available + on Exynos7 SoCs. - reg: physical base address of the controller and length of memory mapped region.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt new file mode 100644 index 0000000..f98b374 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
@@ -0,0 +1,24 @@ +I2C for Hisilicon hix5hd2 chipset platform + +Required properties: +- compatible: Must be "hisilicon,hix5hd2-i2c" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- #address-cells = <1>; +- #size-cells = <0>; +- clocks: phandles to input clocks. + +Optional properties: +- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000 +- Child nodes conforming to i2c bus binding + +Examples: +I2C0@f8b10000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0xf8b10000 0x1000>; + interrupts = <0 38 4>; + clocks = <&clock HIX5HD2_I2C0_RST>; + #address-cells = <1>; + #size-cells = <0>; +}
diff --git a/Documentation/devicetree/bindings/i2c/ti,bq32k.txt b/Documentation/devicetree/bindings/i2c/ti,bq32k.txt new file mode 100644 index 0000000..e204906 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ti,bq32k.txt
@@ -0,0 +1,18 @@ +* TI BQ32000 I2C Serial Real-Time Clock + +Required properties: +- compatible: Should contain "ti,bq32000". +- reg: I2C address for chip + +Optional properties: +- trickle-resistor-ohms : Selected resistor for trickle charger + Values usable are 1120 and 20180 + Should be given if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled +Example: + bq32000: rtc@68 { + compatible = "ti,bq32000"; + trickle-resistor-ohms = <1120>; + reg = <0x68>; + };
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 6af570e..fbde415 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -35,7 +35,6 @@ cirrus,cs42l51 Cirrus Logic CS42L51 audio codec dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock dallas,ds1338 I2C RTC with 56-Byte NV RAM -dallas,ds1339 I2C Serial Real-Time Clock dallas,ds1340 I2C RTC with Trickle Charger dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output dallas,ds1631 High-Precision Digital Thermometer @@ -44,7 +43,7 @@ dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O dallas,ds75 Digital Thermometer and Thermostat -dialog,da9053 DA9053: flexible system level PMIC with multicore support +dlg,da9053 DA9053: flexible system level PMIC with multicore support epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt new file mode 100644 index 0000000..5d3ec1d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
@@ -0,0 +1,24 @@ +Rockchip Successive Approximation Register (SAR) A/D Converter bindings + +Required properties: +- compatible: Should be "rockchip,saradc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for + the peripheral clock. +- vref-supply: The regulator supply ADC reference voltage. +- #io-channel-cells: Should be 1, see ../iio-bindings.txt + +Example: + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + #io-channel-cells = <1>; + vref-supply = <&vcc18>; + };
diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt index dcebff1..1a4a43d 100644 --- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
@@ -9,7 +9,7 @@ - interrupts: Should contain the interrupt for the device - clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock. - clock-names: Must contain "adc", matching entry in the clocks property. -- vref-supply: The regulator supply ADC refrence voltage. +- vref-supply: The regulator supply ADC reference voltage. Example: adc0: adc@4003b000 {
diff --git a/Documentation/devicetree/bindings/iio/dac/max5821.txt b/Documentation/devicetree/bindings/iio/dac/max5821.txt new file mode 100644 index 0000000..54276ce --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/max5821.txt
@@ -0,0 +1,14 @@ +Maxim max5821 DAC device driver + +Required properties: + - compatible: Must be "maxim,max5821" + - reg: Should contain the DAC I2C address + - vref-supply: Phandle to the vref power supply + +Example: + + max5821@38 { + compatible = "maxim,max5821"; + reg = <0x38>; + vref-supply = <®_max5821>; + };
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt index 0ac23f2..1852906 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -11,10 +11,6 @@ Optional properties for main touchpad device: -- linux,gpio-keymap: An array of up to 4 entries indicating the Linux - keycode generated by each GPIO. Linux keycodes are defined in - <dt-bindings/input/input.h>. - - linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages on GPIO bit changes. An array of up to 8 entries can be provided indicating the Linux keycode mapped to each bit of the status byte,
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt new file mode 100644 index 0000000..ee09c8f --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt
@@ -0,0 +1,50 @@ +* Texas Instruments - drv260x Haptics driver family + +Required properties: + - compatible - One of: + "ti,drv2604" - DRV2604 + "ti,drv2605" - DRV2605 + "ti,drv2605l" - DRV2605L + - reg - I2C slave address + - vbat-supply - Required supply regulator + - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric) + DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration + sequence during init. And the device is configured for real + time playback mode (RTP mode). + DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator) + - library-sel - These are ROM based waveforms pre-programmed into the IC. + This should be set to set the library to use at power up. + (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LIB_EMPTY - Do not use a pre-programmed library + DRV260X_ERM_LIB_A - Pre-programmed Library + DRV260X_ERM_LIB_B - Pre-programmed Library + DRV260X_ERM_LIB_C - Pre-programmed Library + DRV260X_ERM_LIB_D - Pre-programmed Library + DRV260X_ERM_LIB_E - Pre-programmed Library + DRV260X_ERM_LIB_F - Pre-programmed Library + DRV260X_LIB_LRA - Pre-programmed LRA Library + +Optional properties: + - enable-gpio - gpio pin to enable/disable the device. + - vib-rated-mv - The rated voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. + - vib-overdrive-mv - The overdrive voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. +Example: + +haptics: haptics@5a { + compatible = "ti,drv2605l"; + reg = <0x5a>; + vbat-supply = <&vbat>; + enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mode = <DRV260X_LRA_MODE>; + library-sel = <DRV260X_LIB_LRA>; + vib-rated-mv = <3200>; + vib-overdriver-mv = <3200>; +} + +For more product information please see the link below: +http://www.ti.com/product/drv2605
diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt new file mode 100644 index 0000000..996382c --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt
@@ -0,0 +1,17 @@ +* Texas Instruments - drv2667 Haptics driver + +Required properties: + - compatible - "ti,drv2667" - DRV2667 + - reg - I2C slave address + - vbat-supply - Required supply regulator + +Example: + +haptics: haptics@59 { + compatible = "ti,drv2667"; + reg = <0x59>; + vbat-supply = <&vbat>; +}; + +For more product information please see the link below: +http://www.ti.com/product/drv2667
diff --git a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt new file mode 100644 index 0000000..a3dde8c --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
@@ -0,0 +1,36 @@ +Texas Instruments Palmas family power button module + +This module is part of the Palmas family of PMICs. For more details +about the whole chip see: +Documentation/devicetree/bindings/mfd/palmas.txt. + +This module provides a simple power button event via an Interrupt. + +Required properties: +- compatible: should be one of the following + - "ti,palmas-pwrbutton": For Palmas compatible power on button +- interrupt-parent: Parent interrupt device, must be handle of palmas node. +- interrupts: Interrupt number of power button submodule on device. + +Optional Properties: + +- ti,palmas-long-press-seconds: Duration in seconds which the power + button should be kept pressed for Palmas to power off automatically. + NOTE: This depends on OTP support and POWERHOLD signal configuration + on platform. Valid values are 6, 8, 10 and 12. +- ti,palmas-pwron-debounce-milli-seconds: Duration in milliseconds + which the power button should be kept pressed for Palmas to register + a press for debouncing purposes. NOTE: This depends on specific + Palmas variation capability. Valid values are 15, 100, 500 and 1000. + +Example: + +&palmas { + palmas_pwr_button: pwrbutton { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + ti,palmas-long-press-seconds = <12>; + ti,palmas-pwron-debounce-milli-seconds = <15>; + }; +};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt index 2742e9c..f292917 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
@@ -2,7 +2,7 @@ Required properties: - compatible: Should be "atmel,<chip>-aic" - <chip> can be "at91rm9200" or "sama5d3" + <chip> can be "at91rm9200", "sama5d3" or "sama5d4" - interrupt-controller: Identifies the node as an interrupt controller. - interrupt-parent: For single AIC system, it is an empty property. - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt new file mode 100644 index 0000000..ff812a8 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
@@ -0,0 +1,86 @@ +Broadcom BCM7120-style Level 2 interrupt controller + +This interrupt controller hardware is a second level interrupt controller that +is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based +platforms. It can be found on BCM7xxx products starting with BCM7120. + +Such an interrupt controller has the following hardware design: + +- outputs multiple interrupts signals towards its interrupt controller parent + +- controls how some of the interrupts will be flowing, whether they will + directly output an interrupt signal towards the interrupt controller parent, + or if they will output an interrupt signal at this 2nd level interrupt + controller, in particular for UARTs + +- not all 32-bits within the interrupt controller actually map to an interrupt + +The typical hardware layout for this controller is represented below: + +2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC) + +0 -----[ MUX ] ------------|==========> GIC interrupt 75 + \-----------\ + | +1 -----[ MUX ] --------)---|==========> GIC interrupt 76 + \------------| + | +2 -----[ MUX ] --------)---|==========> GIC interrupt 77 + \------------| + | +3 ---------------------| +4 ---------------------| +5 ---------------------| +7 ---------------------|---|===========> GIC interrupt 66 +9 ---------------------| +10 --------------------| +11 --------------------/ + +6 ------------------------\ + |===========> GIC interrupt 64 +8 ------------------------/ + +12 ........................ X +13 ........................ X (not connected) +.. +31 ........................ X + +Required properties: + +- compatible: should be "brcm,bcm7120-l2-intc" +- reg: specifies the base physical address and size of the registers +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupt-parent: specifies the phandle to the parent interrupt controller + this one is cascaded from +- interrupts: specifies the interrupt line(s) in the interrupt-parent controller + node, valid values depend on the type of parent interrupt controller +- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts + are wired to this 2nd level interrupt controller, and how they match their + respective interrupt parents. Should match exactly the number of interrupts + specified in the 'interrupts' property. + +Optional properties: + +- brcm,irq-can-wake: if present, this means the L2 controller can be used as a + wakeup source for system suspend/resume. + +- brcm,int-fwd-mask: if present, a 32-bits bit mask to configure for the + interrupts which have a mux gate, typically UARTs. Setting these bits will + make their respective interrupts outputs bypass this 2nd level interrupt + controller completely, it completely transparent for the interrupt controller + parent + +Example: + +irq0_intc: interrupt-controller@f0406800 { + compatible = "brcm,bcm7120-l2-intc"; + interrupt-parent = <&intc>; + #interrupt-cells = <1>; + reg = <0xf0406800 0x8>; + interrupt-controller; + interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>; + brcm,int-map-mask = <0xeb8>, <0x140>; + brcm,int-fwd-mask = <0x7>; +};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt index 1f8b0c5..c73acd0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
@@ -2,7 +2,13 @@ Required properties: -- compatible: has to be "renesas,intc-irqpin" +- compatible: has to be "renesas,intc-irqpin-<soctype>", "renesas,intc-irqpin" + as fallback. + Examples with soctypes are: + - "renesas,intc-irqpin-r8a7740" (R-Mobile A1) + - "renesas,intc-irqpin-r8a7778" (R-Car M1A) + - "renesas,intc-irqpin-r8a7779" (R-Car H1) + - "renesas,intc-irqpin-sh73a0" (SH-Mobile AG5) - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in interrupts.txt in this directory
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt new file mode 100644 index 0000000..1a88e62 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
@@ -0,0 +1,32 @@ +DT bindings for the R-Mobile/R-Car interrupt controller + +Required properties: + +- compatible: has to be "renesas,irqc-<soctype>", "renesas,irqc" as fallback. + Examples with soctypes are: + - "renesas,irqc-r8a73a4" (R-Mobile AP6) + - "renesas,irqc-r8a7790" (R-Car H2) + - "renesas,irqc-r8a7791" (R-Car M2-W) + - "renesas,irqc-r8a7792" (R-Car V2H) + - "renesas,irqc-r8a7793" (R-Car M2-N) + - "renesas,irqc-r8a7794" (R-Car E2) +- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in + interrupts.txt in this directory + +Optional properties: + +- any properties, listed in interrupts.txt, and any standard resource allocation + properties + +Example: + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7790", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>; + };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt new file mode 100644 index 0000000..d9bb106 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
@@ -0,0 +1,36 @@ +Keystone 2 IRQ controller IP + +On Keystone SOCs, DSP cores can send interrupts to ARM +host using the IRQ controller IP. It provides 28 IRQ signals to ARM. +The IRQ handler running on HOST OS can identify DSP signal source by +analyzing SRCCx bits in IPCARx registers. This is one of the component +used by the IPC mechanism used on Keystone SOCs. + +Required Properties: +- compatible: should be "ti,keystone-irq" +- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to + access device control registers and the offset inside + device control registers range. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source should be 1. +- interrupts: interrupt reference to primary interrupt controller + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + kirq0: keystone_irq0@026202a0 { + compatible = "ti,keystone-irq"; + ti,syscon-dev = <&devctrl 0x2a0>; + interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + dsp0: dsp0 { + compatible = "linux,rproc-user"; + ... + interrupt-parent = <&kirq0>; + interrupts = <10 2>; + };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt index 2d0f7cd..0676050 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
@@ -14,6 +14,7 @@ "arm,smmu-v1" "arm,smmu-v2" "arm,mmu-400" + "arm,mmu-401" "arm,mmu-500" depending on the particular implementation and/or the
diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt new file mode 100644 index 0000000..379cefdc --- /dev/null +++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt
@@ -0,0 +1,99 @@ +Device Tree Bindings for Register Bit LEDs + +Register bit leds are used with syscon multifunctional devices +where single bits in a certain register can turn on/off a +single LED. The register bit LEDs appear as children to the +syscon device, with the proper compatible string. For the +syscon bindings see: +Documentation/devicetree/bindings/mfd/syscon.txt + +Each LED is represented as a sub-node of the syscon device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: + +Required properties: +- compatible : must be "register-bit-led" +- offset : register offset to the register controlling this LED +- mask : bit mask for the bit controlling this LED in the register + typically 0x01, 0x02, 0x04 ... + +Optional properties: +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- default-state: (optional) The initial state of the LED. Valid + values are "on", "off", and "keep". If the LED is already on or off + and the default-state property is set the to same value, then no + glitch should be produced where the LED momentarily turns off (or + on). The "keep" setting will keep the LED at whatever its current + state is, without producing a glitch. The default is off if this + property is not present. + +Example: + +syscon: syscon@10000000 { + compatible = "arm,realview-pb1176-syscon", "syscon"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; +};
diff --git a/Documentation/devicetree/bindings/mailbox/mailbox.txt b/Documentation/devicetree/bindings/mailbox/mailbox.txt new file mode 100644 index 0000000..1a2cd3d --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mailbox.txt
@@ -0,0 +1,38 @@ +* Generic Mailbox Controller and client driver bindings + +Generic binding to provide a way for Mailbox controller drivers to +assign appropriate mailbox channel to client drivers. + +* Mailbox Controller + +Required property: +- #mbox-cells: Must be at least 1. Number of cells in a mailbox + specifier. + +Example: + mailbox: mailbox { + ... + #mbox-cells = <1>; + }; + + +* Mailbox Client + +Required property: +- mboxes: List of phandle and mailbox channel specifiers. + +Optional property: +- mbox-names: List of identifier strings for each mailbox channel + required by the client. The use of this property + is discouraged in favor of using index in list of + 'mboxes' while requesting a mailbox. Instead the + platforms may define channel indices, in DT headers, + to something legible. + +Example: + pwr_cntrl: power { + ... + mbox-names = "pwr-ctrl", "rpc"; + mboxes = <&mailbox 0 + &mailbox 1>; + };
diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt new file mode 100644 index 0000000..48edc4b --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
@@ -0,0 +1,108 @@ +OMAP2+ Mailbox Driver +===================== + +The OMAP mailbox hardware facilitates communication between different processors +using a queued mailbox interrupt mechanism. The IP block is external to the +various processor subsystems and is connected on an interconnect bus. The +communication is achieved through a set of registers for message storage and +interrupt configuration registers. + +Each mailbox IP block has a certain number of h/w fifo queues and output +interrupt lines. An output interrupt line is routed to an interrupt controller +within a processor subsystem, and there can be more than one line going to a +specific processor's interrupt controller. The interrupt line connections are +fixed for an instance and are dictated by the IP integration into the SoC +(excluding the SoCs that have a Interrupt Crossbar IP). Each interrupt line is +programmable through a set of interrupt configuration registers, and have a rx +and tx interrupt source per h/w fifo. Communication between different processors +is achieved through the appropriate programming of the rx and tx interrupt +sources on the appropriate interrupt lines. + +The number of h/w fifo queues and interrupt lines dictate the usable registers. +All the current OMAP SoCs except for the newest DRA7xx SoC has a single IP +instance. DRA7xx has multiple instances with different number of h/w fifo queues +and interrupt lines between different instances. The interrupt lines can also be +routed to different processor sub-systems on DRA7xx as they are routed through +the Crossbar, a kind of interrupt router/multiplexer. + +Mailbox Device Node: +==================== +A Mailbox device node is used to represent a Mailbox IP instance within a SoC. +The sub-mailboxes are represented as child nodes of this parent node. + +Required properties: +-------------------- +- compatible: Should be one of the following, + "ti,omap2-mailbox" for OMAP2420, OMAP2430 SoCs + "ti,omap3-mailbox" for OMAP3430, OMAP3630 SoCs + "ti,omap4-mailbox" for OMAP44xx, OMAP54xx, AM33xx, + AM43xx and DRA7xx SoCs +- reg: Contains the mailbox register address range (base + address and length) +- interrupts: Contains the interrupt information for the mailbox + device. The format is dependent on which interrupt + controller the OMAP device uses +- ti,hwmods: Name of the hwmod associated with the mailbox +- ti,mbox-num-users: Number of targets (processor devices) that the mailbox + device can interrupt +- ti,mbox-num-fifos: Number of h/w fifo queues within the mailbox IP block + +Child Nodes: +============ +A child node is used for representing the actual sub-mailbox device that is +used for the communication between the host processor and a remote processor. +Each child node should have a unique node name across all the different +mailbox device nodes. + +Required properties: +-------------------- +- ti,mbox-tx: sub-mailbox descriptor property defining a Tx fifo +- ti,mbox-rx: sub-mailbox descriptor property defining a Rx fifo + +Sub-mailbox Descriptor Data +--------------------------- +Each of the above ti,mbox-tx and ti,mbox-rx properties should have 3 cells of +data that represent the following: + Cell #1 (fifo_id) - mailbox fifo id used either for transmitting + (ti,mbox-tx) or for receiving (ti,mbox-rx) + Cell #2 (irq_id) - irq identifier index number to use from the parent's + interrupts data. Should be 0 for most of the cases, a + positive index value is seen only on mailboxes that have + multiple interrupt lines connected to the MPU processor. + Cell #3 (usr_id) - mailbox user id for identifying the interrupt line + associated with generating a tx/rx fifo interrupt. + +Example: +-------- + +/* OMAP4 */ +mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; +}; + +/* AM33xx */ +mailbox: mailbox@480C8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <77>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; +};
diff --git a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt new file mode 100644 index 0000000..fb5e760 --- /dev/null +++ b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
@@ -0,0 +1,25 @@ +Device-Tree bindings for hix5hd2 ir IP + +Required properties: + - compatible: Should contain "hisilicon,hix5hd2-ir". + - reg: Base physical address of the controller and length of memory + mapped region. + - interrupts: interrupt-specifier for the sole interrupt generated by + the device. The interrupt specifier format depends on the interrupt + controller parent. + - clocks: clock phandle and specifier pair. + - hisilicon,power-syscon: phandle of syscon used to control power. + +Optional properties: + - linux,rc-map-name : Remote control map name. + +Example node: + + ir: ir@f8001000 { + compatible = "hisilicon,hix5hd2-ir"; + reg = <0xf8001000 0x1000>; + interrupts = <0 47 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + hisilicon,power-syscon = <&sysctrl>; + linux,rc-map-name = "rc-tivo"; + };
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt new file mode 100644 index 0000000..f9c6454 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
@@ -0,0 +1,11 @@ +Binding for Synopsys IntelliDDR Multi Protocol Memory Controller + +Required properties: + - compatible: Should be 'xlnx,zynq-ddrc-a05' + - reg: Base address and size of the controllers memory area + +Example: + memory-controller@f8006000 { + compatible = "xlnx,zynq-ddrc-a05"; + reg = <0xf8006000 0x1000>; + };
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 5c7e723..7bd1273 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -42,6 +42,13 @@ the chip default will be used. If present exactly five values must be specified. + - wlf,inmode : A list of INn_MODE register values, where n is the number + of input signals. Valid values are 0 (Differential), 1 (Single-ended) and + 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. + If present, values must be specified less than or equal to the number of + input singals. If values less than the number of input signals, elements + that has not been specifed are set to 0 by default. + - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt
diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt new file mode 100644 index 0000000..a285695 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
@@ -0,0 +1,15 @@ +* Device tree bindings for Atmel GPBR (General Purpose Backup Registers) + +The GPBR are a set of battery-backed registers. + +Required properties: +- compatible: "atmel,at91sam9260-gpbr", "syscon" +- reg: contains offset/length value of the GPBR memory + region. + +Example: + +gpbr: gpbr@fffffd50 { + compatible = "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffd50 0x10>; +};
diff --git a/Documentation/devicetree/bindings/mfd/hi6421.txt b/Documentation/devicetree/bindings/mfd/hi6421.txt new file mode 100644 index 0000000..0d5a446 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/hi6421.txt
@@ -0,0 +1,38 @@ +* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd. + +Required parent device properties: +- compatible : contains "hisilicon,hi6421-pmic"; +- reg : register range space of hi6421; + +Supported Hi6421 sub-devices include: + +Device IRQ Names Supply Names Description +------ --------- ------------ ----------- +regulators : None : None : Regulators + +Required child device properties: +None. + +Example: + hi6421 { + compatible = "hisilicon,hi6421-pmic"; + reg = <0xfcc00000 0x0180>; /* 0x60 << 2 */ + + regulators { + // supply for MLC NAND/ eMMC + hi6421_vout0_reg: hi6421_vout0 { + regulator-name = "VOUT0"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + // supply for 26M Oscillator + hi6421_vout1_reg: hi6421_vout1 { + regulator-name = "VOUT1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt new file mode 100644 index 0000000..236264c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max14577.txt
@@ -0,0 +1,146 @@ +Maxim MAX14577/77836 Multi-Function Device + +MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+ +Battery Charger and SFOUT LDO output for powering USB devices. It is +interfaced to host controller using I2C. + +MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge. + + +Required properties: +- compatible : Must be "maxim,max14577" or "maxim,max77836". +- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836) +- interrupts : IRQ line for the chip. +- interrupt-parent : The parent interrupt controller. + + +Required nodes: + - charger : + Node for configuring the charger driver. + Required properties: + - compatible : "maxim,max14577-charger" + or "maxim,max77836-charger" + - maxim,fast-charge-uamp : Current in uA for Fast Charge; + Valid values: + - for max14577: 90000 - 950000; + - for max77836: 45000 - 475000; + - maxim,eoc-uamp : Current in uA for End-Of-Charge mode; + Valid values: + - for max14577: 50000 - 200000; + - for max77836: 5000 - 100000; + - maxim,ovp-uvolt : OverVoltage Protection Threshold in uV; + In an overvoltage condition, INT asserts and charging + stops. Valid values: + - 6000000, 6500000, 7000000, 7500000; + - maxim,constant-uvolt : Battery Constant Voltage in uV; + Valid values: + - 4000000 - 4280000 (step by 20000); + - 4350000; + + +Optional nodes: +- max14577-muic/max77836-muic : + Node used only by extcon consumers. + Required properties: + - compatible : "maxim,max14577-muic" or "maxim,max77836-muic" + +- regulators : + Required properties: + - compatible : "maxim,max14577-regulator" + or "maxim,max77836-regulator" + + May contain a sub-node per regulator from the list below. Each + sub-node should contain the constraints and initialization information + for that regulator. See regulator.txt for a description of standard + properties for these sub-nodes. + + List of valid regulator names: + - for max14577: CHARGER, SAFEOUT. + - for max77836: CHARGER, SAFEOUT, LDO1, LDO2. + + The SAFEOUT is a fixed voltage regulator so there is no need to specify + voltages for it. + + +Example: + +#include <dt-bindings/interrupt-controller/irq.h> + +max14577@25 { + compatible = "maxim,max14577"; + reg = <0x25>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_NONE>; + + muic: max14577-muic { + compatible = "maxim,max14577-muic"; + }; + + regulators { + compatible = "maxim,max14577-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <950000>; + regulator-boot-on; + }; + }; + + charger { + compatible = "maxim,max14577-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <450000>; + maxim,eoc-uamp = <50000>; + maxim,ovp-uvolt = <6500000>; + }; +}; + + +max77836@25 { + compatible = "maxim,max77836"; + reg = <0x25>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_NONE>; + + muic: max77836-muic { + compatible = "maxim,max77836-muic"; + }; + + regulators { + compatible = "maxim,max77836-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <950000>; + regulator-boot-on; + }; + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + }; + + charger { + compatible = "maxim,max77836-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <225000>; + maxim,eoc-uamp = <7500>; + maxim,ovp-uvolt = <6500000>; + }; +};
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom,pm8xxx.txt deleted file mode 100644 index 03518dc..0000000 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8xxx.txt +++ /dev/null
@@ -1,96 +0,0 @@ -Qualcomm PM8xxx PMIC multi-function devices - -The PM8xxx family of Power Management ICs are used to provide regulated -voltages and other various functionality to Qualcomm SoCs. - -= PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058" - "qcom,pm8921" - -- #address-cells: - Usage: required - Value type: <u32> - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: <u32> - Definition: must be 0 - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: specifies the interrupt that indicates a subdevice - has generated an interrupt (summary interrupt). The - format of the specifier is defined by the binding document - describing the node's interrupt parent. - -- #interrupt-cells: - Usage: required - Value type : <u32> - Definition: must be 2. Specifies the number of cells needed to encode - an interrupt source. The 1st cell contains the interrupt - number. The 2nd cell is the trigger type and level flags - encoded as follows: - - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - -- interrupt-controller: - Usage: required - Value type: <empty> - Definition: identifies this node as an interrupt controller - -= SUBCOMPONENTS - -The PMIC contains multiple independent functions, each described in a subnode. -The below bindings specify the set of valid subnodes. - -== Real-Time Clock - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058-rtc" - "qcom,pm8921-rtc" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the base address of the RTC registers - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the RTC's alarm interrupt - -- allow-set-time: - Usage: optional - Value type: <empty> - Definition: indicates that the setting of RTC time is allowed by - the host CPU - -= EXAMPLE - - pmicintc: pmic@0 { - compatible = "qcom,pm8921"; - interrupts = <104 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - reg = <0x11d>; - interrupts = <0x27 0>; - }; - };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt new file mode 100644 index 0000000..7182b88 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
@@ -0,0 +1,64 @@ + Qualcomm SPMI PMICs multi-function device bindings + +The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084 +PMICs. These PMICs use a QPNP scheme through SPMI interface. +QPNP is effectively a partitioning scheme for dividing the SPMI extended +register space up into logical pieces, and set of fixed register +locations/definitions within these regions, with some of these regions +specifically used for interrupt handling. + +The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are +interfaced to the chip via the SPMI (System Power Management Interface) bus. +Support for multiple independent functions are implemented by splitting the +16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes +each. A function can consume one or more of these fixed-size register regions. + +Required properties: +- compatible: Should contain one of: + "qcom,pm8941" + "qcom,pm8841" + "qcom,pma8084" + or generalized "qcom,spmi-pmic". +- reg: Specifies the SPMI USID slave address for this device. + For more information see: + Documentation/devicetree/bindings/spmi/spmi.txt + +Required properties for peripheral child nodes: +- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name. + +Optional properties for peripheral child nodes: +- interrupts: Interrupts are specified as a 4-tuple. For more information + see: + Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt +- interrupt-names: Corresponding interrupt name to the interrupts property + +Each child node of SPMI slave id represents a function of the PMIC. In the +example below the rtc device node represents a peripheral of pm8941 +SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1. + +Example: + + spmi { + compatible = "qcom,spmi-pmic-arb"; + + pm8941@0 { + compatible = "qcom,pm8941", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + + rtc { + compatible = "qcom,rtc"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm"; + }; + }; + + pm8941@1 { + compatible = "qcom,pm8941", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + + regulator { + compatible = "qcom,regulator"; + regulator-name = "8941_boost"; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt new file mode 100644 index 0000000..f24f334 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
@@ -0,0 +1,97 @@ +Qualcomm PM8xxx PMIC multi-function devices + +The PM8xxx family of Power Management ICs are used to provide regulated +voltages and other various functionality to Qualcomm SoCs. + += PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,pm8058" + "qcom,pm8921" + +- #address-cells: + Usage: required + Value type: <u32> + Definition: must be 1 + +- #size-cells: + Usage: required + Value type: <u32> + Definition: must be 0 + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: specifies the interrupt that indicates a subdevice + has generated an interrupt (summary interrupt). The + format of the specifier is defined by the binding document + describing the node's interrupt parent. + +- #interrupt-cells: + Usage: required + Value type : <u32> + Definition: must be 2. Specifies the number of cells needed to encode + an interrupt source. The 1st cell contains the interrupt + number. The 2nd cell is the trigger type and level flags + encoded as follows: + + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + +- interrupt-controller: + Usage: required + Value type: <empty> + Definition: identifies this node as an interrupt controller + += SUBCOMPONENTS + +The PMIC contains multiple independent functions, each described in a subnode. +The below bindings specify the set of valid subnodes. + +== Real-Time Clock + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,pm8058-rtc" + "qcom,pm8921-rtc" + "qcom,pm8941-rtc" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: single entry specifying the base address of the RTC registers + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: single entry specifying the RTC's alarm interrupt + +- allow-set-time: + Usage: optional + Value type: <empty> + Definition: indicates that the setting of RTC time is allowed by + the host CPU + += EXAMPLE + + pmicintc: pmic@0 { + compatible = "qcom,pm8921"; + interrupts = <104 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts = <0x27 0>; + }; + };
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt new file mode 100644 index 0000000..9e6e259 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -0,0 +1,177 @@ +RK808 Power Management Integrated Circuit + +Required properties: +- compatible: "rockchip,rk808" +- reg: I2C slave address +- interrupt-parent: The parent interrupt controller. +- interrupts: the interrupt outputs of the controller. +- #clock-cells: from common clock binding; shall be set to 1 (multiple clock + outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + +Optional properties: +- clock-output-names: From common clock binding to override the + default output clock name +- rockchip,system-power-controller: Telling whether or not this pmic is controlling + the system power. +- vcc1-supply: The input supply for DCDC_REG1 +- vcc2-supply: The input supply for DCDC_REG2 +- vcc3-supply: The input supply for DCDC_REG3 +- vcc4-supply: The input supply for DCDC_REG4 +- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 +- vcc7-supply: The input supply for LDO_REG3 and LDO_REG7 +- vcc8-supply: The input supply for SWITCH_REG1 +- vcc9-supply: The input supply for LDO_REG4 and LDO_REG5 +- vcc10-supply: The input supply for LDO_REG6 +- vcc11-supply: The input supply for LDO_REG8 +- vcc12-supply: The input supply for SWITCH_REG2 + +Regulators: All the regulators of RK808 to be instantiated shall be +listed in a child node named 'regulators'. Each regulator is represented +by a child node of the 'regulators' node. + + regulator-name { + /* standard regulator bindings here */ + }; + +Following regulators of the RK808 PMIC block are supported. Note that +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO +number as described in RK808 datasheet. + + - DCDC_REGn + - valid values for n are 1 to 4. + - LDO_REGn + - valid values for n are 1 to 8. + - SWITCH_REGn + - valid values for n are 1 to 2 + +Standard regulator bindings are used inside regulator subnodes. Check + Documentation/devicetree/bindings/regulator/regulator.txt +for more details + +Example: + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + reg = <0x1b>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt new file mode 100644 index 0000000..937785a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -0,0 +1,36 @@ +* Ricoh RN5T618 PMIC + +Ricoh RN5T618 is a power management IC which integrates 3 step-down +DCDC converters, 7 low-dropout regulators, a Li-ion battery charger, +fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled +through a I2C interface. + +Required properties: + - compatible: should be "ricoh,rn5t618" + - reg: the I2C slave address of the device + +Sub-nodes: + - regulators: the node is required if the regulator functionality is + needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1, + LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2. + The common bindings for each individual regulator can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + +Example: + + pmic@32 { + compatible = "ricoh,rn5t618"; + reg = <0x32>; + + regulators { + DCDC1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + DCDC2 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index ba2d7f0..0e4026a 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -47,7 +47,7 @@ regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us - BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly + BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly regulator-ramp-delay = <0> can be used for them to disable ramp delay. In the absence of the regulator-ramp-delay property, the default ramp delay will be used.
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt index 56edb55..3fb68bf 100644 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -13,6 +13,7 @@ - interrupt-parent : Specifies which IRQ controller we're connected to - wakeup-source : Marks the input device as wakable - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 + - irq-gpio : If present, which GPIO to use for event IRQ Example:
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt index b9ee7b9..3d19963 100644 --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -23,8 +23,13 @@ depending on how the external oscillator is wired. Optional properties: -- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or - SLEEP-to-OFF transition when the system poweroffs. + +- ti,system-power-controller: This indicates that TWL4030 is the + power supply master of the system. With this flag, the chip will + initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the + system poweroffs. + +- ti,use_poweroff: Deprecated name for ti,system-power-controller Example: &i2c1 {
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 431716e..b52628b 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -40,6 +40,8 @@ - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported +- dsr: Value the card's (optional) Driver Stage Register (DSR) should be + programmed with. Valid range: [0 .. 0xffff]. *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted"
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index c559f3f..c327c2d 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -10,12 +10,14 @@ Required Properties: * compatible: should be - - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following + - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following, + before RK3288 + - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 Example: rkdwmmc0@12200000 { - compatible = "rockchip,rk2928-dw-mshc"; + compatible = "rockchip,rk3288-dw-mshc"; reg = <0x12200000 0x1000>; interrupts = <0 75 0>; #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index fa0f327..400b640 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -19,6 +19,9 @@ "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC "renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC + "renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC + "renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC + "renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index c472883..6edc3b6 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -36,6 +36,7 @@ - reg : should specify the address and size used for NFC command registers, NFC registers and NFC Sram. NFC Sram address and size can be absent if don't want to use it. + - clocks: phandle to the peripheral clock - Optional properties: - atmel,write-by-sram: boolean to enable NFC write by sram. @@ -98,6 +99,7 @@ compatible = "atmel,sama5d3-nfc"; #address-cells = <1>; #size-cells = <1>; + clocks = <&hsmc_clk> reg = < 0x70000000 0x10000000 /* NFC Command Registers */ 0xffffc000 0x00000070 /* NFC HSMC regs */
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index ee654e9..fb733c4 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -110,8 +110,8 @@ Other factor which governs the selection of ecc-scheme is oob-size. Higher ECC schemes require more OOB/Spare area to store ECC syndrome, so the device should have enough free bytes available its OOB/Spare - area to accomodate ECC for entire page. In general following expression - helps in determining if given device can accomodate ECC syndrome: + area to accommodate ECC for entire page. In general following expression + helps in determining if given device can accommodate ECC syndrome: "2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE" where OOBSIZE number of bytes in OOB/spare area @@ -133,5 +133,5 @@ Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and trying to use BCH16 (ECC_BYTES=26) ecc-scheme. Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which can be accomodate in the OOB/Spare area of this device + which can be accommodated in the OOB/Spare area of this device (OOBSIZE=128). So this device can use BCH16 ecc-scheme.
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt index 61c5ec8..6b9f680 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
@@ -4,8 +4,8 @@ file systems on embedded devices. - compatible : should contain the specific model of mtd chip(s) - used, if known, followed by either "cfi-flash", "jedec-flash" - or "mtd-ram". + used, if known, followed by either "cfi-flash", "jedec-flash", + "mtd-ram" or "mtd-rom". - reg : Address range(s) of the mtd chip(s) It's possible to (optionally) define multiple "reg" tuples so that non-identical chips can be described in one node.
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index ebcad25..cfcc527 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -3,7 +3,7 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in APM X-Gene SoC. -Required properties: +Required properties for all the ethernet interfaces: - compatible: Should be "apm,xgene-enet" - reg: Address and length of the register set for the device. It contains the information of registers in the same order as described by reg-names @@ -15,6 +15,8 @@ - clocks: Reference to the clock entry. - local-mac-address: MAC address assigned to this device - phy-connection-type: Interface type between ethernet device and PHY device + +Required properties for ethernet interfaces that have external PHY: - phy-handle: Reference to a PHY node connected to this device - mdio: Device tree subnode with the following required properties:
diff --git a/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt b/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt new file mode 100644 index 0000000..ab0bb42 --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt
@@ -0,0 +1,39 @@ +* Broadcom UniMAC MDIO bus controller + +Required properties: +- compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2", + "brcm,genet-mdio-v3", "brcm,genet-mdio-v4" or "brcm,unimac-mdio" +- reg: address and length of the regsiter set for the device, first one is the + base register, and the second one is optional and for indirect accesses to + larger than 16-bits MDIO transactions +- reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw" +- #size-cells: must be 1 +- #address-cells: must be 0 + +Optional properties: +- interrupts: must be one if the interrupt is shared with the Ethernet MAC or + Ethernet switch this MDIO block is integrated from, or must be two, if there + are two separate interrupts, first one must be "mdio done" and second must be + for "mdio error" +- interrupt-names: must be "mdio_done_error" when there is a share interrupt fed + to this hardware block, or must be "mdio_done" for the first interrupt and + "mdio_error" for the second when there are separate interrupts + +Child nodes of this MDIO bus controller node are standard Ethernet PHY device +nodes as described in Documentation/devicetree/bindings/net/phy.txt + +Example: + +mdio@403c0 { + compatible = "brcm,unimac-mdio"; + reg = <0x403c0 0x8 0x40300 0x18>; + reg-names = "mdio", "mdio_indir_rw"; + #size-cells = <1>; + #address-cells = <0>; + + ... + phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +};
diff --git a/Documentation/devicetree/bindings/net/broadcom-sf2.txt b/Documentation/devicetree/bindings/net/broadcom-sf2.txt new file mode 100644 index 0000000..30d4875 --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-sf2.txt
@@ -0,0 +1,78 @@ +* Broadcom Starfighter 2 integrated swich + +Required properties: + +- compatible: should be "brcm,bcm7445-switch-v4.0" +- reg: addresses and length of the register sets for the device, must be 6 + pairs of register addresses and lengths +- interrupts: interrupts for the devices, must be two interrupts +- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt +- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt +- #size-cells: must be 0 +- #address-cells: must be 2, see dsa/dsa.txt + +Subnodes: + +The integrated switch subnode should be specified according to the binding +described in dsa/dsa.txt. + +Optional properties: + +- reg-names: litteral names for the device base register addresses, when present + must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" + +- interrupt-names: litternal names for the device interrupt lines, when present + must be: "switch_0" and "switch_1" + +- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the + switch + +- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported + by the switch + +- brcm,fcb-pause-override: boolean property, if present indicates that the switch + supports Failover Control Block pause override capability + +- brcm,acb-packets-inflight: boolean property, if present indicates that the switch + Admission Control Block supports reporting the number of packets in-flight in a + switch queue + +Example: + +switch_top@f0b00000 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0 0xf0b00000 0x40804>; + + ethernet_switch@0 { + compatible = "brcm,bcm7445-switch-v4.0"; + #size-cells = <0>; + #address-cells = <2>; + reg = <0x0 0x40000 + 0x40000 0x110 + 0x40340 0x30 + 0x40380 0x30 + 0x40400 0x34 + 0x40600 0x208>; + interrupts = <0 0x18 0 + 0 0x19 0>; + brcm,num-gphy = <1>; + brcm,num-rgmii-ports = <2>; + brcm,fcb-pause-override; + brcm,acb-packets-inflight; + + ... + switch@0 { + reg = <0 0>; + #size-cells = <0>; + #address-cells <1>; + + port@0 { + label = "gphy"; + reg = <0>; + }; + ... + }; + }; +};
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt new file mode 100644 index 0000000..9e33177 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -0,0 +1,67 @@ +Bosch MCAN controller Device Tree Bindings +------------------------------------------------- + +Required properties: +- compatible : Should be "bosch,m_can" for M_CAN controllers +- reg : physical base address and size of the M_CAN + registers map and Message RAM +- reg-names : Should be "m_can" and "message_ram" +- interrupts : Should be the interrupt number of M_CAN interrupt + line 0 and line 1, could be same if sharing + the same interrupt. +- interrupt-names : Should contain "int0" and "int1" +- clocks : Clocks used by controller, should be host clock + and CAN clock. +- clock-names : Should contain "hclk" and "cclk" +- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt +- pinctrl-names : Names corresponding to the numbered pinctrl states +- bosch,mram-cfg : Message RAM configuration data. + Multiple M_CAN instances can share the same Message + RAM and each element(e.g Rx FIFO or Tx Buffer and etc) + number in Message RAM is also configurable, + so this property is telling driver how the shared or + private Message RAM are used by this M_CAN controller. + + The format should be as follows: + <offset sidf_elems xidf_elems rxf0_elems rxf1_elems + rxb_elems txe_elems txb_elems> + The 'offset' is an address offset of the Message RAM + where the following elements start from. This is + usually set to 0x0 if you're using a private Message + RAM. The remain cells are used to specify how many + elements are used for each FIFO/Buffer. + + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words + + Please refer to 2.4.1 Message RAM Configuration in + Bosch M_CAN user manual for details. + +Example: +SoC dtsi: +m_can1: can@020e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <0 114 0x04>, + <0 114 0x04>; + interrupt-names = "int0", "int1"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + status = "disabled"; +}; + +Board dts: +&m_can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_m_can1>; + status = "enabled"; +};
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt new file mode 100644 index 0000000..002d844 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -0,0 +1,43 @@ +Renesas R-Car CAN controller Device Tree Bindings +------------------------------------------------- + +Required properties: +- compatible: "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. + "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. + "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. + "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC. +- reg: physical base address and size of the R-Car CAN register map. +- interrupts: interrupt specifier for the sole interrupt. +- clocks: phandles and clock specifiers for 3 CAN clock inputs. +- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". +- pinctrl-0: pin control group to be used for this controller. +- pinctrl-names: must be "default". + +Optional properties: +- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: + <0x0> (default) : Peripheral clock (clkp1) + <0x1> : Peripheral clock (clkp2) + <0x3> : Externally input clock + +Example +------- + +SoC common .dtsi file: + + can0: can@e6e80000 { + compatible = "renesas,can-r8a7791"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, + <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + status = "disabled"; + }; + +Board specific .dts file: + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +};
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index ae2b8b7..33fe846 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -24,15 +24,17 @@ - ti,hwmods : Must be "cpgmac0" - no_bd_ram : Must be 0 or 1 - dual_emac : Specifies Switch to act as Dual EMAC +- syscon : Phandle to the system control device node, which is + the control module device of the am33x Slave Properties: Required properties: - phy_id : Specifies slave phy id - phy-mode : See ethernet.txt file in the same directory -- mac-address : See ethernet.txt file in the same directory Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports +- mac-address : See ethernet.txt file in the same directory Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. @@ -57,6 +59,7 @@ active_slave = <0>; cpts_clock_mult = <0x80000000>; cpts_clock_shift = <29>; + syscon = <&cm>; cpsw_emac0: slave@0 { phy_id = <&davinci_mdio>, <0>; phy-mode = "rgmii-txid"; @@ -85,6 +88,7 @@ active_slave = <0>; cpts_clock_mult = <0x80000000>; cpts_clock_shift = <29>; + syscon = <&cm>; cpsw_emac0: slave@0 { phy_id = <&davinci_mdio>, <0>; phy-mode = "rgmii-txid";
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 49f4f7a..a62c889 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -39,6 +39,22 @@ This property is only used when switches are being chained/cascaded together. +- phy-handle : Phandle to a PHY on an external MDIO bus, not the + switch internal one. See + Documentation/devicetree/bindings/net/ethernet.txt + for details. + +- phy-mode : String representing the connection to the designated + PHY node specified by the 'phy-handle' property. See + Documentation/devicetree/bindings/net/ethernet.txt + for details. + +Optional subnodes: +- fixed-link : Fixed-link subnode describing a link to a non-MDIO + managed entity. See + Documentation/devicetree/bindings/net/fixed-link.txt + for details. + Example: dsa@0 { @@ -58,6 +74,7 @@ port@0 { reg = <0>; label = "lan1"; + phy-handle = <&phy0>; }; port@1 {
diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt new file mode 100644 index 0000000..8dc1c79 --- /dev/null +++ b/Documentation/devicetree/bindings/net/emac_rockchip.txt
@@ -0,0 +1,50 @@ +* ARC EMAC 10/100 Ethernet platform driver for Rockchip Rk3066/RK3188 SoCs + +Required properties: +- compatible: Should be "rockchip,rk3066-emac" or "rockchip,rk3188-emac" + according to the target SoC. +- reg: Address and length of the register set for the device +- interrupts: Should contain the EMAC interrupts +- rockchip,grf: phandle to the syscon grf used to control speed and mode + for emac. +- phy: see ethernet.txt file in the same directory. +- phy-mode: see ethernet.txt file in the same directory. + +Optional properties: +- phy-supply: phandle to a regulator if the PHY needs one + +Clock handling: +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Shall be "hclk" for the host clock needed to calculate and set + polling period of EMAC and "macref" for the reference clock needed to transfer + data to and from the phy. + +Child nodes of the driver are the individual PHY devices connected to the +MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus. + +Examples: + +ethernet@10204000 { + compatible = "rockchip,rk3188-emac"; + reg = <0xc0fc2000 0x3c>; + interrupts = <6>; + mac-address = [ 00 11 22 33 44 55 ]; + + clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref"; + + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; + + rockchip,grf = <&grf>; + + phy = <&phy0>; + phy-mode = "rmii"; + phy-supply = <&vcc_rmii>; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <1>; + }; +};
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 8a2c7b5..0c8775c 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -16,6 +16,12 @@ - phy-handle : phandle to the PHY device connected to this device. - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. Use instead of phy-handle. +- fsl,num-tx-queues : The property is valid for enet-avb IP, which supports + hw multi queues. Should specify the tx queue number, otherwise set tx queue + number to 1. +- fsl,num-rx-queues : The property is valid for enet-avb IP, which supports + hw multi queues. Should specify the rx queue number, otherwise set rx queue + number to 1. Optional subnodes: - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
diff --git a/Documentation/devicetree/bindings/net/marvell-pxa168.txt b/Documentation/devicetree/bindings/net/marvell-pxa168.txt new file mode 100644 index 0000000..845a148 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-pxa168.txt
@@ -0,0 +1,36 @@ +* Marvell PXA168 Ethernet Controller + +Required properties: +- compatible: should be "marvell,pxa168-eth". +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device. +- clocks: pointer to the clock for the device. + +Optional properties: +- port-id: Ethernet port number. Should be '0','1' or '2'. +- #address-cells: must be 1 when using sub-nodes. +- #size-cells: must be 0 when using sub-nodes. +- phy-handle: see ethernet.txt file in the same directory. +- local-mac-address: see ethernet.txt file in the same directory. + +Sub-nodes: +Each PHY can be represented as a sub-node. This is not mandatory. + +Sub-nodes required properties: +- reg: the MDIO address of the PHY. + +Example: + + eth0: ethernet@f7b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xf7b90000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + phy-handle = <ðphy0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + };
diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt new file mode 100644 index 0000000..ec633d7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt
@@ -0,0 +1,25 @@ +* Amlogic Meson DWMAC Ethernet controller + +The device inherits all the properties of the dwmac/stmmac devices +described in the file net/stmmac.txt with the following changes. + +Required properties: + +- compatible: should be "amlogic,meson6-dwmac" along with "snps,dwmac" + and any applicable more detailed version number + described in net/stmmac.txt + +- reg: should contain a register range for the dwmac controller and + another one for the Amlogic specific configuration + +Example: + + ethmac: ethernet@c9410000 { + compatible = "amlogic,meson6-dwmac", "snps,dwmac"; + reg = <0xc9410000 0x10000 + 0xc1108108 0x4>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + clocks = <&clk81>; + clock-names = "stmmaceth"; + }
diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt index 98a3e61..e1d99b9 100644 --- a/Documentation/devicetree/bindings/net/micrel.txt +++ b/Documentation/devicetree/bindings/net/micrel.txt
@@ -16,3 +16,9 @@ KSZ8051: register 0x1f, bits 5..4 See the respective PHY datasheet for the mode values. + + - clocks, clock-names: contains clocks according to the common clock bindings. + + supported clocks: + - KSZ8021, KSZ8031: "rmii-ref": The RMII refence input clock. Used + to determine the XI input clock.
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt index 3b58ae4..9005608 100644 --- a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt +++ b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
@@ -26,7 +26,7 @@ clock-frequency = <400000>; interrupt-parent = <&gpio5>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; };
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 1e43613..7c89ca2 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -13,6 +13,11 @@ - pinctrl-names: Contains only one value - "default". - pintctrl-0: Specifies the pin control groups used for this controller. - autosuspend-delay: Specify autosuspend delay in milliseconds. +- vin-voltage-override: Specify voltage of VIN pin in microvolts. +- irq-status-read-quirk: Specify that the trf7970a being used has the + "IRQ Status Read" erratum. +- en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF" + erratum. Example (for ARM-based BeagleBone with TRF7970A on SPI1): @@ -30,7 +35,10 @@ ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, <&gpio2 5 GPIO_ACTIVE_LOW>; vin-supply = <&ldo3_reg>; + vin-voltage-override = <5000000>; autosuspend-delay = <30000>; + irq-status-read-quirk; + en2-rf-quirk; status = "okay"; }; };
diff --git a/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt b/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt new file mode 100644 index 0000000..c74989c --- /dev/null +++ b/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt
@@ -0,0 +1,47 @@ +* Qualcomm QCA7000 (Ethernet over SPI protocol) + +Note: The QCA7000 is useable as a SPI device. In this case it must be defined +as a child of a SPI master in the device tree. + +Required properties: +- compatible : Should be "qca,qca7000" +- reg : Should specify the SPI chip select +- interrupts : The first cell should specify the index of the source interrupt + and the second cell should specify the trigger type as rising edge +- spi-cpha : Must be set +- spi-cpol: Must be set + +Optional properties: +- interrupt-parent : Specify the pHandle of the source interrupt +- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at. + Numbers smaller than 1000000 or greater than 16000000 are invalid. Missing + the property will set the SPI frequency to 8000000 Hertz. +- local-mac-address: 6 bytes, MAC address +- qca,legacy-mode : Set the SPI data transfer of the QCA7000 to legacy mode. + In this mode the SPI master must toggle the chip select between each data + word. In burst mode these gaps aren't necessary, which is faster. + This setting depends on how the QCA7000 is setup via GPIO pin strapping. + If the property is missing the driver defaults to burst mode. + +Example: + +/* Freescale i.MX28 SPI master*/ +ssp2: spi@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + qca7000: ethernet@0 { + compatible = "qca,qca7000"; + reg = <0x0>; + interrupt-parent = <&gpio3>; /* GPIO Bank 3 */ + interrupts = <25 0x1>; /* Index: 25, rising edge */ + spi-cpha; /* SPI mode: CPHA=1 */ + spi-cpol; /* SPI mode: CPOL=1 */ + spi-max-frequency = <8000000>; /* freq: 8 MHz */ + local-mac-address = [ A0 B0 C0 D0 E0 F0 ]; + }; +};
diff --git a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt index 989f6c9..888c250 100644 --- a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt +++ b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
@@ -17,7 +17,7 @@ - samsung,pbl: Integer, Programmable Burst Length. Supported values are 1, 2, 4, 8, 16, or 32. - samsung,burst-map: Integer, Program the possible bursts supported by sxgbe - This is an interger and represents allowable DMA bursts when fixed burst. + This is an integer and represents allowable DMA bursts when fixed burst. Allowable range is 0x01-0x3F. When this field is set fixed burst is enabled. When fixed length is needed for burst mode, it can be set within allowable range.
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt index 0f8487b8..e77e167 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
@@ -11,3 +11,5 @@ are supported on the device. Valid value for SMSC LAN91c111 are 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning 16-bit access only. +- power-gpios: GPIO to control the PWRDWN pin +- reset-gpios: GPIO to control the RESET pin
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index 2a60cd3..3a9d679 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -12,6 +12,10 @@ - altr,sysmgr-syscon : Should be the phandle to the system manager node that encompasses the glue register, the register offset, and the register shift. +Optional properties: +altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if + DWMAC controller is connected emac splitter. + Example: gmac0: ethernet@ff700000 {
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index 3dd3d0b..6762a6b 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -1,58 +1,65 @@ STMicroelectronics SoC DWMAC glue layer controller +This file documents differences between the core properties in +Documentation/devicetree/bindings/net/stmmac.txt +and what is needed on STi platforms to program the stmmac glue logic. + The device node has following properties. Required properties: - - compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac" or - "st,stid127-dwmac". - - reg : Offset of the glue configuration register map in system + - compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac", + "st,stih407-dwmac", "st,stid127-dwmac". + - reg : Offset of the glue configuration register map in system configuration regmap pointed by st,syscon property and size. - - - reg-names : Should be "sti-ethconf". - - - st,syscon : Should be phandle to system configuration node which + - st,syscon : Should be phandle to system configuration node which encompases this glue registers. + - st,gmac_en: this is to enable the gmac into a dedicated sysctl control + register available on STiH407 SoC. + - sti-ethconf: this is the gmac glue logic register to enable the GMAC, + select among the different modes and program the clk retiming. + - pinctrl-0: pin-control for all the MII mode supported. - - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be - wired up in from different sources. One via TXCLK pin and other via CLK_125 - pin. This wiring is totally board dependent. However the retiming glue - logic should be configured accordingly. Possible values for this property - - "txclk" - if 125Mhz clock is wired up via txclk line. - "clk_125" - if 125Mhz clock is wired up via clk_125 line. - - This property is only valid for Giga bit setup( GMII, RGMII), and it is - un-used for non-giga bit (MII and RMII) setups. Also note that internal - clockgen can not generate stable 125Mhz clock. - - - st,ext-phyclk: This boolean property indicates who is generating the clock - for tx and rx. This property is only valid for RMII case where the clock can - be generated from the MAC or PHY. - - - clock-names: should be "sti-ethclk". - - clocks: Should point to ethernet clockgen which can generate phyclk. - +Optional properties: + - resets : phandle pointing to the system reset controller with correct + reset line index for ethernet reset. + - st,ext-phyclk: valid only for RMII where PHY can generate 50MHz clock or + MAC can generate it. + - st,tx-retime-src: This specifies which clk is wired up to the mac for + retimeing tx lines. This is totally board dependent and can take one of the + posssible values from "txclk", "clk_125" or "clkgen". + If not passed, the internal clock will be used by default. + - sti-ethclk: this is the phy clock. + - sti-clkconf: this is an extra sysconfig register, available in new SoCs, + to program the clk retiming. + - st,gmac_en: to enable the GMAC, this only is present in some SoCs; e.g. + STiH407. Example: -ethernet0: dwmac@fe810000 { - device_type = "network"; - compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; - reg = <0xfe810000 0x8000>, <0x8bc 0x4>; - reg-names = "stmmaceth", "sti-ethconf"; - interrupts = <0 133 0>, <0 134 0>, <0 135 0>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - phy-mode = "mii"; +ethernet0: dwmac@9630000 { + device_type = "network"; + status = "disabled"; + compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710"; + reg = <0x9630000 0x8000>, <0x80 0x4>; + reg-names = "stmmaceth", "sti-ethconf"; - st,syscon = <&syscfg_rear>; + st,syscon = <&syscfg_sbc_reg>; + st,gmac_en; + resets = <&softreset STIH407_ETH1_SOFTRESET>; + reset-names = "stmmaceth"; - snps,pbl = <32>; + interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>, + <GIC_SPI 99 IRQ_TYPE_NONE>, + <GIC_SPI 100 IRQ_TYPE_NONE>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + + snps,pbl = <32>; snps,mixed-burst; - resets = <&softreset STIH416_ETH0_SOFTRESET>; - reset-names = "stmmaceth"; - pinctrl-0 = <&pinctrl_mii0>; - pinctrl-names = "default"; - clocks = <&CLK_S_GMAC0_PHY>; - clock-names = "stmmaceth"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1>; + + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&CLK_S_C0_FLEXGEN CLK_EXT2F_A9>, + <&CLK_S_C0_FLEXGEN CLK_ETH_PHY>; };
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index e45ac3f..c41afd9 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -58,5 +58,5 @@ snps,multicast-filter-bins = <256>; snps,perfect-filter-entries = <128>; clocks = <&clock>; - clock-names = "stmmaceth">; + clock-names = "stmmaceth"; };
diff --git a/Documentation/devicetree/bindings/panel/auo,b101xtn01.txt b/Documentation/devicetree/bindings/panel/auo,b101xtn01.txt new file mode 100644 index 0000000..889d511 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/auo,b101xtn01.txt
@@ -0,0 +1,7 @@ +AU Optronics Corporation 10.1" WXGA TFT LCD panel + +Required properties: +- compatible: should be "auo,b101xtn01" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index ed0d9b9..9f4faa8 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -23,3 +23,6 @@ Optional properties: - reset-gpio: gpio pin number of power good signal +- bus-range: PCI bus numbers covered (it is recommended for new devicetrees to + specify this property, to keep backwards compatibility a range of 0x00-0xff + is assumed if not present)
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 9455fd0..6fbba53 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -17,7 +17,9 @@ pcie@0x01000000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; - reg = <0x01ffc000 0x4000>; + reg = <0x01ffc000 0x04000>, + <0x01f00000 0x80000>; + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci";
diff --git a/Documentation/devicetree/bindings/pci/fsl,pci.txt b/Documentation/devicetree/bindings/pci/fsl,pci.txt new file mode 100644 index 0000000..d8ac4a7 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,pci.txt
@@ -0,0 +1,27 @@ +* Bus Enumeration by Freescale PCI-X Agent + +Typically any Freescale PCI-X bridge hardware strapped into Agent mode +is prevented from enumerating the bus. The PrPMC form-factor requires +all mezzanines to be PCI-X Agents, but one per system may still +enumerate the bus. + +The property defined below will allow a PCI-X bridge to be used for bus +enumeration despite being strapped into Agent mode. + +Required properties: +- fsl,pci-agent-force-enum : There is no value associated with this + property. The property itself is treated as a boolean. + +Example: + + /* PCI-X bridge known to be PrPMC Monarch */ + pci0: pci@ef008000 { + fsl,pci-agent-force-enum; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + ... + ... + };
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt index f0b0436..cf3e205 100644 --- a/Documentation/devicetree/bindings/pci/host-generic-pci.txt +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.txt
@@ -55,7 +55,7 @@ cfg_offset(bus, device, function, register) = bus << 16 | device << 11 | function << 8 | register -Whilst ECAM extends this by 4 bits to accomodate 4k of function space: +Whilst ECAM extends this by 4 bits to accommodate 4k of function space: cfg_offset(bus, device, function, register) = bus << 20 | device << 15 | function << 12 | register
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 0823362..d763e04 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -1,7 +1,10 @@ NVIDIA Tegra PCIe controller Required properties: -- compatible: "nvidia,tegra20-pcie" or "nvidia,tegra30-pcie" +- compatible: Must be one of: + - "nvidia,tegra20-pcie" + - "nvidia,tegra30-pcie" + - "nvidia,tegra124-pcie" - device_type: Must be "pci" - reg: A list of physical base address and length for each set of controller registers. Must contain an entry for each entry in the reg-names property. @@ -57,6 +60,11 @@ - afi - pcie_x +Required properties on Tegra124 and later: +- phys: Must contain an entry for each entry in phy-names. +- phy-names: Must include the following entries: + - pcie + Power supplies for Tegra20: - avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V. - vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. @@ -84,6 +92,21 @@ - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V. - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. +Power supplies for Tegra124: +- Required: + - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V. + - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must + supply 1.05 V. + - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. + Must supply 3.3 V. + - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3). + Must supply 3.3 V. + - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must + supply 2.8-3.3 V. + - avdd-pll-erefe-supply: Power supply for PLLE (shared with USB3). Must + supply 1.05 V. + Root ports are defined as subnodes of the PCIe controller node. Required properties:
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt new file mode 100644 index 0000000..54eae29 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -0,0 +1,63 @@ +TI Keystone PCIe interface + +Keystone PCI host Controller is based on Designware PCI h/w version 3.65. +It shares common functions with PCIe Designware core driver and inherit +common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt + +Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt +for the details of Designware DT bindings. Additional properties are +described here as well as properties that are not applicable. + +Required Properties:- + +compatibility: "ti,keystone-pcie" +reg: index 1 is the base address and length of DW application registers. + index 2 is the base address and length of PCI device ID register. + +pcie_msi_intc : Interrupt controller device node for MSI IRQ chip + interrupt-cells: should be set to 1 + interrupt-parent: Parent interrupt controller phandle + interrupts: GIC interrupt lines connected to PCI MSI interrupt lines + + Example: + pcie_msi_intc: msi-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>; + }; + +pcie_intc: Interrupt controller device node for Legacy IRQ chip + interrupt-cells: should be set to 1 + interrupt-parent: Parent interrupt controller phandle + interrupts: GIC interrupt lines connected to PCI Legacy interrupt lines + + Example: + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; + }; + +Optional properties:- + phys: phandle to Generic Keystone SerDes phy for PCI + phy-names: name of the Generic Keystine SerDes phy for PCI + - If boot loader already does PCI link establishment, then phys and + phy-names shouldn't be present. + +Designware DT Properties not applicable for Keystone PCI + +1. pcie_bus clock-names not used. Instead, a phandle to phys is used. +
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt new file mode 100644 index 0000000..1070b06 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -0,0 +1,57 @@ +* AppliedMicro X-Gene PCIe interface + +Required properties: +- device_type: set to "pci" +- compatible: should contain "apm,xgene-pcie" to identify the core. +- reg: A list of physical base address and length for each set of controller + registers. Must contain an entry for each entry in the reg-names + property. +- reg-names: Must include the following entries: + "csr": controller configuration registers. + "cfg": pcie configuration space registers. +- #address-cells: set to <3> +- #size-cells: set to <2> +- ranges: ranges for the outbound memory, I/O regions. +- dma-ranges: ranges for the inbound memory regions. +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt + numbers. +- clocks: from common clock binding: handle to pci clock. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if dma operations are coherent + +Example: + +SoC specific DT Entry: + + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + }; + + +Board specific DT Entry: + &pcie0 { + status = "ok"; + };
diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt new file mode 100644 index 0000000..3e2c88d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -0,0 +1,62 @@ +* Xilinx AXI PCIe Root Port Bridge DT description + +Required properties: +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a" +- reg: Should contain AXI PCIe registers location and length +- device_type: must be "pci" +- interrupts: Should contain AXI PCIe interrupt +- interrupt-map-mask, + interrupt-map: standard PCI properties to define the mapping of the + PCI interface to interrupt numbers. +- ranges: ranges for the PCI memory regions (I/O space region is not + supported by hardware) + Please refer to the standard PCI bus binding document for a more + detailed explanation + +Optional properties: +- bus-range: PCI bus numbers covered + +Interrupt controller child node ++++++++++++++++++++++++++++++++ +Required properties: +- interrupt-controller: identifies the node as an interrupt controller +- #address-cells: specifies the number of cells needed to encode an + address. The value must be 0. +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. + +NOTE: +The core provides a single interrupt for both INTx/MSI messages. So, +created a interrupt controller node to support 'interrupt-map' DT +functionality. The driver will create an IRQ domain for this map, decode +the four INTx interrupts in ISR and route them to this domain. + + +Example: +++++++++ + + pci_express: axi-pcie@50000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "xlnx,axi-pcie-host-1.00.a"; + reg = < 0x50000000 0x10000000 >; + device_type = "pci"; + interrupts = < 0 52 4 >; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 1>, + <0 0 0 2 &pcie_intc 2>, + <0 0 0 3 &pcie_intc 3>, + <0 0 0 4 &pcie_intc 4>; + ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; + + pcie_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + } + };
diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt index 2aa1840..1293c32 100644 --- a/Documentation/devicetree/bindings/phy/phy-bindings.txt +++ b/Documentation/devicetree/bindings/phy/phy-bindings.txt
@@ -27,7 +27,7 @@ }; That node describes an IP block (PHY provider) that implements 2 different PHYs. -In order to differentiate between these 2 PHYs, an additonal specifier should be +In order to differentiate between these 2 PHYs, an additional specifier should be given while trying to get a reference to it. PHY user node
diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt new file mode 100644 index 0000000..1ef8228 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
@@ -0,0 +1,30 @@ +ST STiH407 USB PHY controller + +This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3 +host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics. + +Required properties: +- compatible : should be "st,stih407-usb2-phy" +- reg : contain the offset and length of the system configuration registers + used as glue logic to control & parameter phy +- reg-names : the names of the system configuration registers in "reg", should be "param" and "reg" +- st,syscfg : sysconfig register to manage phy parameter at driver level +- resets : list of phandle and reset specifier pairs. There should be two entries, one + for the whole phy and one for the port +- reset-names : list of reset signal names. Should be "global" and "port" +See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/reset.txt + +Example: + +usb2_picophy0: usbpicophy@f8 { + compatible = "st,stih407-usb2-phy"; + reg = <0xf8 0x04>, /* syscfg 5062 */ + <0xf4 0x04>; /* syscfg 5061 */ + reg-names = "param", "ctrl"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; +};
diff --git a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt new file mode 100644 index 0000000..00944a0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt
@@ -0,0 +1,24 @@ +STMicroelectronics STiH41x USB PHY binding +------------------------------------------ + +This file contains documentation for the usb phy found in STiH415/6 SoCs from +STMicroelectronics. + +Required properties: +- compatible : should be "st,stih416-usb-phy" or "st,stih415-usb-phy" +- st,syscfg : should be a phandle of the syscfg node +- clock-names : must contain "osc_phy" +- clocks : must contain an entry for each name in clock-names. +See: Documentation/devicetree/bindings/clock/clock-bindings.txt +- #phy-cells : must be 0 for this phy +See: Documentation/devicetree/bindings/phy/phy-bindings.txt + +Example: + +usb2_phy: usb2phy@0 { + compatible = "st,stih416-usb-phy"; + #phy-cell = <0>; + st,syscfg = <&syscfg_rear>; + clocks = <&clk_sysin>; + clock-names = "osc_phy"; +};
diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt new file mode 100644 index 0000000..86f2dbe --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
@@ -0,0 +1,39 @@ +Qualcomm DWC3 HS AND SS PHY CONTROLLER +-------------------------------------- + +DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer +controllers. Each DWC3 PHY controller should have its own node. + +Required properties: +- compatible: should contain one of the following: + - "qcom,dwc3-hs-usb-phy" for High Speed Synopsis PHY controller + - "qcom,dwc3-ss-usb-phy" for Super Speed Synopsis PHY controller +- reg: offset and length of the DWC3 PHY controller register set +- #phy-cells: must be zero +- clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. +- clock-names: Should contain "ref" for the PHY reference clock + +Optional clocks: + "xo" External reference clock + +Example: + phy@100f8800 { + compatible = "qcom,dwc3-hs-usb-phy"; + reg = <0x100f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "ok"; + }; + + phy@100f8830 { + compatible = "qcom,dwc3-ss-usb-phy"; + reg = <0x100f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "ok"; + };
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt new file mode 100644 index 0000000..00fc52a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -0,0 +1,51 @@ +* Renesas R-Car generation 2 USB PHY + +This file provides information on what the device node for the R-Car generation +2 USB PHY contains. + +Required properties: +- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. + "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. +- reg: offset and length of the register block. +- #address-cells: number of address cells for the USB channel subnodes, must + be <1>. +- #size-cells: number of size cells for the USB channel subnodes, must be <0>. +- clocks: clock phandle and specifier pair. +- clock-names: string, clock input name, must be "usbhs". + +The USB PHY device tree node should have the subnodes corresponding to the USB +channels. These subnodes must contain the following properties: +- reg: the USB controller selector; see the table below for the values. +- #phy-cells: see phy-bindings.txt in the same directory, must be <1>. + +The phandle's argument in the PHY specifier is the USB controller selector for +the USB channel; see the selector meanings below: + ++-----------+---------------+---------------+ +|\ Selector | | | ++ --------- + 0 | 1 | +| Channel \| | | ++-----------+---------------+---------------+ +| 0 | PCI EHCI/OHCI | HS-USB | +| 2 | PCI EHCI/OHCI | xHCI | ++-----------+---------------+---------------+ + +Example (Lager board): + + usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7790"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + clock-names = "usbhs"; + + usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + };
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 7a6feea..15e0f2c 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -17,8 +17,11 @@ ------------------------------------------------- Required properties: -- compatible : should be "samsung,exynos5250-dp-video-phy"; -- reg : offset and length of the Display Port PHY register set; +- compatible : should be one of the following supported values: + - "samsung,exynos5250-dp-video-phy" + - "samsung,exynos5420-dp-video-phy" +- samsung,pmu-syscon: phandle for PMU system controller interface, used to + control pmu registers for power isolation. - #phy-cells : from the generic PHY bindings, must be 0; Samsung S5P/EXYNOS SoC series USB PHY
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 02ab5ab..b7a93e8 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -19,6 +19,7 @@ Required properties for iomux controller: - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl" + or "atmel,sama5d3-pinctrl" - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be configured in this periph mode. All the periph and bank need to be describe. @@ -85,13 +86,20 @@ PIN_BANK 0 is pioA, PIN_BANK 1 is pioB... Bits used for CONFIG: -PULL_UP (1 << 0): indicate this pin need a pull up. -MULTIDRIVE (1 << 1): indicate this pin need to be configured as multidrive. -DEGLITCH (1 << 2): indicate this pin need deglitch. -PULL_DOWN (1 << 3): indicate this pin need a pull down. -DIS_SCHMIT (1 << 4): indicate this pin need to disable schmit trigger. -DEBOUNCE (1 << 16): indicate this pin need debounce. -DEBOUNCE_VAL (0x3fff << 17): debounce val. +PULL_UP (1 << 0): indicate this pin needs a pull up. +MULTIDRIVE (1 << 1): indicate this pin needs to be configured as multi-drive. + Multi-drive is equivalent to open-drain type output. +DEGLITCH (1 << 2): indicate this pin needs deglitch. +PULL_DOWN (1 << 3): indicate this pin needs a pull down. +DIS_SCHMIT (1 << 4): indicate this pin needs to the disable schmitt trigger. +DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the + following values: + 00 - No change (reset state value kept) + 01 - Low + 10 - Medium + 11 - High +DEBOUNCE (1 << 16): indicate this pin needs debounce. +DEBOUNCE_VAL (0x3fff << 17): debounce value. NOTE: Some requirements for using atmel,at91rm9200-pinctrl binding:
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt index 6464bf7..189814e 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt
@@ -10,6 +10,7 @@ - reg: Should contain a list of base address and size pairs for: -- first entry - the drive strength and pad control registers. -- second entry - the pinmux registers + -- third entry - the MIPI_PAD_CTRL register Tegra124 adds the following optional properties for pin configuration subnodes. The macros for options are defined in the @@ -91,6 +92,12 @@ dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4. + MIPI pad control groups: + + These support only the nvidia,function property. + + dsi_b + Valid values for nvidia,functions are: blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, @@ -101,14 +108,15 @@ sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1, - dp, rtck, sys, clk tmds. + dp, rtck, sys, clk tmds, csi, dsi_b Example: pinmux: pinmux { compatible = "nvidia,tegra124-pinmux"; - reg = <0x70000868 0x164 /* Pad control registers */ - 0x70003000 0x434>; /* PinMux registers */ + reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ + <0x0 0x70003000 0x0 0x434>, /* Mux registers */ + <0x0 0x70000820 0x0 0x8>; /* MIPI pad control */ }; Example pinmux entries:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index fa40a17..98eb94d 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -127,6 +127,24 @@ nodes, is again defined entirely by the binding for the individual pin controller device. +== Generic pin multiplexing node content == + +pin multiplexing nodes: + +function - the mux function to select +groups - the list of groups to select with this function + +Example: + +state_0_node_a { + function = "uart0"; + groups = "u0rxtx", "u0rtscts"; +}; +state_1_node_a { + function = "spi0"; + groups = "spi0pins"; +}; + == Generic pin configuration node content == Many data items that are represented in a pin configuration node are common @@ -139,8 +157,12 @@ Supported generic properties are: pins - the list of pins that properties in the node - apply to -function - the mux function to select + apply to (either this or "group" has to be + specified) +group - the group to apply the properties to, if the driver + supports configuration of whole groups rather than + individual pins (either this or "pins" has to be + specified) bias-disable - disable any pin bias bias-high-impedance - high impedance mode ("third-state", "floating") bias-bus-hold - latch weakly @@ -163,6 +185,21 @@ output-high - set the pin to output mode with high level slew-rate - set the slew rate +For example: + +state_0_node_a { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + bias-pull-up; +}; +state_1_node_a { + pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + output-high; +}; +state_2_node_a { + group = "foo-group"; + bias-pull-up; +}; + Some of the generic properties take arguments. For those that do, the arguments are described below. @@ -170,15 +207,6 @@ binding for the hardware defines: - Whether the entries are integers or strings, and their meaning. -- function takes a list of function names/IDs as a required argument. The - specific binding for the hardware defines: - - Whether the entries are integers or strings, and their meaning. - - Whether only a single entry is allowed (which is applied to all entries - in the pins property), or whether there may alternatively be one entry per - entry in the pins property, in which case the list lengths must match, and - for each list index i, the function at list index i is applied to the pin - at list index i. - - bias-pull-up, -down and -pin-default take as optional argument on hardware supporting it the pull strength in Ohm. bias-disable will disable the pull.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt index 92fae82..2fb90b3 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -50,7 +50,7 @@ gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1, gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm, - riva_wlan, sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic, + riva_wlan, sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic, ps_hold Example:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt new file mode 100644 index 0000000..ffafa19 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
@@ -0,0 +1,179 @@ +Qualcomm APQ8084 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +MSM8960 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,apq8084-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio146, + sdc1_clk, + sdc1_cmd, + sdc1_data + sdc2_clk, + sdc2_cmd, + sdc2_data + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, + blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, + blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, + blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, + blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10, + blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, + blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8, + blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, + blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, + blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, + blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2, + cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt, gcc_vtt,i + gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, + hdmi_cec, hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, + ldo_en, ldo_update, mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst, + pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s, + qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, + sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, + spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, tsif1, + tsif2, uim, uim_batt_alarm + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@fd510000 { + compatible = "qcom,apq8084-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + + uart2: uart2-default { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + }; + + tx { + pins = "gpio4"; + drive-strength = <4>; + bias-disable; + }; + + rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index 4658b69..388b213 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -2,8 +2,8 @@ The Rockchip Pinmux Controller, enables the IC to share one PAD to several functional blocks. The sharing is done by -multiplexing the PAD input/output signals. For each PAD there are up to -4 muxing options with option 0 being the use as a GPIO. +multiplexing the PAD input/output signals. For each PAD there are several +muxing options with option 0 being the use as a GPIO. Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the @@ -58,7 +58,7 @@ Required properties for pin configuration node: - rockchip,pins: 3 integers array, represents a group of pins mux and config setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>. - The MUX 0 means gpio and MUX 1 to 3 mean the specific device function. + The MUX 0 means gpio and MUX 1 to N mean the specific device function. The phandle of a node containing the generic pinconfig options to use, as described in pinctrl-bindings.txt in this directory.
diff --git a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt new file mode 100644 index 0000000..88c8027 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt
@@ -0,0 +1,13 @@ +OMAP Pinctrl definitions + +Required properties: +- compatible : Should be one of: + "ti,omap2420-padconf" - OMAP2420 compatible pinctrl + "ti,omap2430-padconf" - OMAP2430 compatible pinctrl + "ti,omap3-padconf" - OMAP3 compatible pinctrl + "ti,omap4-padconf" - OMAP4 compatible pinctrl + "ti,omap5-padconf" - OMAP5 compatible pinctrl + "ti,dra7-padconf" - DRA7 compatible pinctrl + "ti,am437-padconf" - AM437x compatible pinctrl + +See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details.
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt new file mode 100644 index 0000000..98c1667 --- /dev/null +++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -0,0 +1,49 @@ +* Generic PM domains + +System on chip designs are often divided into multiple PM domains that can be +used for power gating of selected IP blocks for power saving by reduced leakage +current. + +This device tree binding can be used to bind PM domain consumer devices with +their PM domains provided by PM domain providers. A PM domain provider can be +represented by any node in the device tree and can provide one or more PM +domains. A consumer node can refer to the provider by a phandle and a set of +phandle arguments (so called PM domain specifiers) of length specified by the +#power-domain-cells property in the PM domain provider node. + +==PM domain providers== + +Required properties: + - #power-domain-cells : Number of cells in a PM domain specifier; + Typically 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains (e.g. power controllers), but can be any value + as specified by device tree binding documentation of particular provider. + +Example: + + power: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <1>; + }; + +The node above defines a power controller that is a PM domain provider and +expects one cell as its phandle argument. + +==PM domain consumers== + +Required properties: + - power-domains : A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. + +Example: + + leaky-device@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&power 0>; + }; + +The node above defines a typical PM domain consumer device, which is located +inside a PM domain with index 0 of a power controller represented by a node +with the label "power".
diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt new file mode 100644 index 0000000..0c94c63 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
@@ -0,0 +1,26 @@ +Binding for the LTC2952 PowerPath controller + +This chip is used to externally trigger a system shut down. Once the trigger has +been sent, the chips' watchdog has to be reset to gracefully shut down. +If the Linux systems decides to shut down it powers off the platform via the +kill signal. + +Required properties: + +- compatible: Must contain: "lltc,ltc2952" +- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's trigger line +- watchdog-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's watchdog line +- kill-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's kill line + +Example: + +ltc2952 { + compatible = "lltc,ltc2952"; + + trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; +};
diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt new file mode 100644 index 0000000..809af54 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt
@@ -0,0 +1,11 @@ +*Device-Tree bindings for ST SW reset functionality + +Required properties: +- compatible: should be "st,<chip>-restart". +- st,syscfg: should be a phandle of the syscfg node. + +Example node: + restart { + compatible = "st,stih416-restart"; + st,syscfg = <&syscfg_sbc>; + };
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt b/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt new file mode 100644 index 0000000..1190631 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
@@ -0,0 +1,23 @@ +Generic SYSCON mapped register reset driver + +This is a generic reset driver using syscon to map the reset register. +The reset is generally performed with a write to the reset register +defined by the register map pointed by syscon reference plus the offset +with the mask defined in the reboot node. + +Required properties: +- compatible: should contain "syscon-reboot" +- regmap: this is phandle to the register map node +- offset: offset in the register map for the reboot register (in bytes) +- mask: the reset value written to the reboot register (32 bit access) + +Default will be little endian mode, 32 bit access only. + +Examples: + + reboot { + compatible = "syscon-reboot"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x1>; + };
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt new file mode 100644 index 0000000..6fbf6e7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -0,0 +1,83 @@ +Rockchip SRAM for IO Voltage Domains: +------------------------------------- + +IO domain voltages on some Rockchip SoCs are variable but need to be +kept in sync between the regulators and the SoC using a special +register. + +A specific example using rk3288: +- If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then + bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to + that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1. + +Said another way, this driver simply handles keeping bits in the SoC's +general register file (GRF) in sync with the actual value of a voltage +hooked up to the pins. + +Note that this driver specifically doesn't include: +- any logic for deciding what voltage we should set regulators to +- any logic for deciding whether regulators (or internal SoC blocks) + should have power or not have power + +If there were some other software that had the smarts of making +decisions about regulators, it would work in conjunction with this +driver. When that other software adjusted a regulator's voltage then +this driver would handle telling the SoC about it. A good example is +vqmmc for SD. In that case the dw_mmc driver simply is told about a +regulator. It changes the regulator between 3.3V and 1.8V at the +right time. This driver notices the change and makes sure that the +SoC is on the same page. + + +Required properties: +- compatible: should be one of: + - "rockchip,rk3188-io-voltage-domain" for rk3188 + - "rockchip,rk3288-io-voltage-domain" for rk3288 +- rockchip,grf: phandle to the syscon managing the "general register files" + + +You specify supplies using the standard regulator bindings by including +a phandle the the relevant regulator. All specified supplies must be able +to report their voltage. The IO Voltage Domain for any non-specified +supplies will be not be touched. + +Possible supplies for rk3188: +- ap0-supply: The supply connected to AP0_VCC. +- ap1-supply: The supply connected to AP1_VCC. +- cif-supply: The supply connected to CIF_VCC. +- flash-supply: The supply connected to FLASH_VCC. +- lcdc0-supply: The supply connected to LCD0_VCC. +- lcdc1-supply: The supply connected to LCD1_VCC. +- vccio0-supply: The supply connected to VCCIO0. +- vccio1-supply: The supply connected to VCCIO1. + Sometimes also labeled VCCIO1 and VCCIO2. + +Possible supplies for rk3288: +- audio-supply: The supply connected to APIO4_VDD. +- bb-supply: The supply connected to APIO5_VDD. +- dvp-supply: The supply connected to DVPIO_VDD. +- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC +- flash1-supply: The supply connected to FLASH1_VDD. Also known as SDIO1. +- gpio30-supply: The supply connected to APIO1_VDD. +- gpio1830 The supply connected to APIO2_VDD. +- lcdc-supply: The supply connected to LCDC_VDD. +- sdcard-supply: The supply connected to SDMMC0_VDD. +- wifi-supply: The supply connected to APIO3_VDD. Also known as SDIO0. + + +Example: + + io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcc18_codec>; + bb-supply = <&vcc33_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc18_flashio>; + gpio1830-supply = <&vcc33_io>; + gpio30-supply = <&vcc33_pmuio>; + lcdc-supply = <&vcc33_lcd>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc18_wl>; + };
diff --git a/Documentation/devicetree/bindings/power_supply/charger-manager.txt b/Documentation/devicetree/bindings/power_supply/charger-manager.txt index 2b33750..ec4fe9d 100644 --- a/Documentation/devicetree/bindings/power_supply/charger-manager.txt +++ b/Documentation/devicetree/bindings/power_supply/charger-manager.txt
@@ -24,7 +24,7 @@ - cm-thermal-zone : name of external thermometer's thermal zone - cm-battery-* : threshold battery temperature for charging -cold : critical cold temperature of battery for charging - -cold-in-minus : flag that cold temerature is in minus degree + -cold-in-minus : flag that cold temperature is in minus degrees -hot : critical hot temperature of battery for charging -temp-diff : temperature difference to allow recharging - cm-dis/charging-max = limits of charging duration
diff --git a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt index 0bda229..3899d6a 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
@@ -1,5 +1,20 @@ Freescale FlexTimer Module (FTM) PWM controller +The same FTM PWM device can have a different endianness on different SoCs. The +device tree provides a property to describing this so that an operating system +device driver can handle all variants of the device. Refer to the table below +for the endianness of the FTM PWM block as integrated into the existing SoCs: + + SoC | FTM-PWM endianness + --------+------------------- + Vybrid | LE + LS1 | BE + LS2 | LE + +Please see ../regmap/regmap.txt for more detail about how to specify endian +modes in device tree. + + Required properties: - compatible: Should be "fsl,vf610-ftm-pwm". - reg: Physical base address and length of the controller's registers @@ -16,7 +31,8 @@ - pinctrl-names: Must contain a "default" entry. - pinctrl-NNN: One property must exist for each entry in pinctrl-names. See pinctrl/pinctrl-bindings.txt for details of the property values. - +- big-endian: Boolean property, required if the FTM PWM registers use a big- + endian rather than little-endian layout. Example: @@ -32,4 +48,5 @@ <&clks VF610_CLK_FTM0_EXT_FIX_EN>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_1>; + big-endian; };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt index d47d15a..b8be3d0 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
@@ -7,8 +7,8 @@ "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC - reg: physical base address and length of the controller's registers - clocks: phandle and clock specifier of the PWM reference clock - - #pwm-cells: should be 2. See pwm.txt in this directory for a - description of the cell format. + - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory + for a description of the cell format. Example:
diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt new file mode 100644 index 0000000..b494f8b --- /dev/null +++ b/Documentation/devicetree/bindings/regmap/regmap.txt
@@ -0,0 +1,47 @@ +Device-Tree binding for regmap + +The endianness mode of CPU & Device scenarios: +Index Device Endianness properties +--------------------------------------------------- +1 BE 'big-endian' +2 LE 'little-endian' + +For one device driver, which will run in different scenarios above +on different SoCs using the devicetree, we need one way to simplify +this. + +Required properties: +- {big,little}-endian: these are boolean properties, if absent + meaning that the CPU and the Device are in the same endianness mode, + these properties are for register values and all the buffers only. + +Examples: +Scenario 1 : CPU in LE mode & device in LE mode. +dev: dev@40031000 { + compatible = "name"; + reg = <0x40031000 0x1000>; + ... +}; + +Scenario 2 : CPU in LE mode & device in BE mode. +dev: dev@40031000 { + compatible = "name"; + reg = <0x40031000 0x1000>; + ... + big-endian; +}; + +Scenario 3 : CPU in BE mode & device in BE mode. +dev: dev@40031000 { + compatible = "name"; + reg = <0x40031000 0x1000>; + ... +}; + +Scenario 4 : CPU in BE mode & device in LE mode. +dev: dev@40031000 { + compatible = "name"; + reg = <0x40031000 0x1000>; + ... + little-endian; +};
diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt index f120f22..3297c53 100644 --- a/Documentation/devicetree/bindings/regulator/da9210.txt +++ b/Documentation/devicetree/bindings/regulator/da9210.txt
@@ -2,7 +2,7 @@ Required properties: -- compatible: must be "diasemi,da9210" +- compatible: must be "dlg,da9210" - reg: the i2c slave address of the regulator. It should be 0x68. Any standard regulator properties can be used to configure the single da9210 @@ -11,7 +11,7 @@ Example: da9210@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <900000>;
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt new file mode 100644 index 0000000..240019a --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -0,0 +1,63 @@ +* Dialog Semiconductor DA9211/DA9213 Voltage Regulator + +Required properties: +- compatible: "dlg,da9211" or "dlg,da9213". +- reg: I2C slave address, usually 0x68. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCKA and BUCKB. + +Optional properties: +- Any optional property defined in regulator.txt + +Example 1) DA9211 + + pmic: da9211@68 { + compatible = "dlg,da9211"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + }; + }; + }; + +Example 2) DA92113 + pmic: da9213@68 { + compatible = "dlg,da9213"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt new file mode 100644 index 0000000..54a3f2c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/fan53555.txt
@@ -0,0 +1,23 @@ +Binding for Fairchild FAN53555 regulators + +Required properties: + - compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828" + - reg: I2C address + +Optional properties: + - fcs,suspend-voltage-selector: declare which of the two available + voltage selector registers should be used for the suspend + voltage. The other one is used for the runtime voltage setting + Possible values are either <0> or <1> + - vin-supply: regulator supplying the vin pin + +Example: + + regulator@40 { + compatible = "fcs,fan53555"; + regulator-name = "fan53555"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&parent_reg>; + fcs,suspend-voltage-selector = <1>; + };
diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt new file mode 100644 index 0000000..a626fc1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/isl9305.txt
@@ -0,0 +1,36 @@ +Intersil ISL9305/ISL9305H voltage regulator + +Required properties: + +- compatible: "isl,isl9305" or "isl,isl9305h" +- reg: I2C slave address, usually 0x68. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node + is defined by the standard binding for regulators; see regulator.txt. +- VINDCD1-supply: A phandle to a regulator node supplying VINDCD1. + VINDCD2-supply: A phandle to a regulator node supplying VINDCD2. + VINLDO1-supply: A phandle to a regulator node supplying VINLDO1. + VINLDO2-supply: A phandle to a regulator node supplying VINLDO2. + +Optional properties: +- Per-regulator optional properties are defined in regulator.txt + +Example + + pmic: isl9305@68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + VINDCD1-supply = <&system_power>; + VINDCD2-supply = <&system_power>; + VINLDO1-supply = <&system_power>; + VINLDO2-supply = <&system_power>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/regulator/max1586-regulator.txt b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt new file mode 100644 index 0000000..c050c17 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt
@@ -0,0 +1,28 @@ +Maxim MAX1586 voltage regulator + +Required properties: +- compatible: must be "maxim,max1586" +- reg: I2C slave address, usually 0x14 +- v3-gain: integer specifying the V3 gain as per datasheet + (1 + R24/R25 + R24/185.5kOhm) +- any required generic properties defined in regulator.txt + +Example: + + i2c_master { + max1586@14 { + compatible = "maxim,max1586"; + reg = <0x14>; + v3-gain = <1000000>; + + regulators { + vcc_core: v3 { + regulator-name = "vcc_core"; + regulator-compatible = "Output_V3"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1705000>; + regulator-always-on; + }; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt new file mode 100644 index 0000000..5aeaffc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max77802.txt
@@ -0,0 +1,53 @@ +Binding for Maxim MAX77802 regulators + +This is a part of device tree bindings of MAX77802 multi-function device. +More information can be found in bindings/mfd/max77802.txt file. + +The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO) +regulators that can be controlled over I2C. + +Following properties should be present in main device node of the MFD chip. + +Optional node: +- regulators : The regulators of max77802 have to be instantiated + under subnode named "regulators" using the following format. + + regulator-name { + standard regulator constraints.... + }; + refer Documentation/devicetree/bindings/regulator/regulator.txt + +The regulator node name should be initialized with a string to get matched +with their hardware counterparts as follow. The valid names are: + + -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30 + and 32-35. + example: LDO1, LDO2, LDO35. + -BUCKn : for BUCKs, where n can lie in range 1 to 10. + example: BUCK1, BUCK5, BUCK10. +Example: + + max77802@09 { + compatible = "maxim,max77802"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 0>; + reg = <0x09>; + #address-cells = <1>; + #size-cells = <0>; + + regulators { + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + };
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt new file mode 100644 index 0000000..ce91f61 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -0,0 +1,27 @@ +pwm regulator bindings + +Required properties: +- compatible: Should be "pwm-regulator" +- pwms: OF device-tree PWM specification (see PWM binding pwm.txt) +- voltage-table: voltage and duty table, include 2 members in each set of + brackets, first one is voltage(unit: uv), the next is duty(unit: percent) + +Any property defined as part of the core regulator binding defined in +regulator.txt can also be used. + +Example: + pwm_regulator { + compatible = "pwm-regulator; + pwms = <&pwm1 0 8448 0>; + + voltage-table = <1114000 0>, + <1095000 10>, + <1076000 20>, + <1056000 30>, + <1036000 40>, + <1016000 50>; + + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + };
diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt new file mode 100644 index 0000000..882455e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
@@ -0,0 +1,16 @@ +SKY81452 voltage regulator + +Required properties: +- any required generic properties defined in regulator.txt + +Optional properties: +- any available generic properties defined in regulator.txt + +Example: + + regulator { + /* generic regulator properties */ + regulator-name = "touch_en"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <8000000>; + };
diff --git a/Documentation/devicetree/bindings/rng/apm,rng.txt b/Documentation/devicetree/bindings/rng/apm,rng.txt new file mode 100644 index 0000000..4dde4b0 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/apm,rng.txt
@@ -0,0 +1,17 @@ +APM X-Gene SoC random number generator. + +Required properties: + +- compatible : should be "apm,xgene-rng" +- reg : specifies base physical address and size of the registers map +- clocks : phandle to clock-controller plus clock-specifier pair +- interrupts : specify the fault interrupt for the RNG device + +Example: + + rng: rng@10520000 { + compatible = "apm,xgene-rng"; + reg = <0x0 0x10520000 0x0 0x100>; + interrupts = <0x0 0x41 0x4>; + clocks = <&rngpkaclk 0>; + };
diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt new file mode 100644 index 0000000..916f576 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
@@ -0,0 +1,18 @@ +* Dallas DS1339 I2C Serial Real-Time Clock + +Required properties: +- compatible: Should contain "dallas,ds1339". +- reg: I2C address for chip + +Optional properties: +- trickle-resistor-ohms : Selected resistor for trickle charger + Values usable for ds1339 are 250, 2000, 4000 + Should be given if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled +Example: + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + trickle-resistor-ohms = <250>; + reg = <0x68>; + };
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt index 7ac7259..ab757b84 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -3,7 +3,10 @@ Required properties: - compatible: should be one of the following. * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc. + * "samsung,s3c2416-rtc" - for controllers compatible with s3c2416 rtc. + * "samsung,s3c2443-rtc" - for controllers compatible with s3c2443 rtc. * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc. + * "samsung,exynos3250-rtc" - for controllers compatible with exynos3250 rtc. - reg: physical base address of the controller and length of memory mapped region. - interrupts: Two interrupt numbers to the cpu should be specified. First
diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt new file mode 100644 index 0000000..f007e42 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
@@ -0,0 +1,17 @@ +* sun6i Real Time Clock + +RTC controller for the Allwinner A31 + +Required properties: +- compatible : Should be "allwinner,sun6i-a31-rtc" +- reg : physical base address of the controller and length of + memory mapped region. +- interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order. + +Example: + +rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <0 40 4>, <0 41 4>; +};
diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt index 12f3cf8..caaeb25 100644 --- a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt +++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
@@ -8,7 +8,8 @@ - syscon: Phandle to SYSCON node, which contain UART control bits. Optional properties: -- uart-use-ms: Indicate the UART has modem signal (DCD, DSR, CTS). +- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD + line respectively. Note: Each UART port should have an alias correctly numbered in "aliases" node. @@ -24,5 +25,7 @@ interrupts = <12 13>; clocks = <&clks 11>; syscon = <&syscon1>; - uart-use-ms; + cts-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>; + dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>; + dcd-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>; };
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt new file mode 100644 index 0000000..48358a3 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -0,0 +1,22 @@ +* Mediatek Universal Asynchronous Receiver/Transmitter (UART) + +Required properties: +- compatible should contain: + * "mediatek,mt6589-uart" for MT6589 compatible UARTS + * "mediatek,mt6582-uart" for MT6582 compatible UARTS + * "mediatek,mt6577-uart" for all compatible UARTS (MT6589, MT6582, MT6577) + +- reg: The base address of the UART register bank. + +- interrupts: A single interrupt specifier. + +- clocks: Clock driving the hardware. + +Example: + + uart0: serial@11006000 { + compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart"; + reg = <0x11006000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + };
diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt index 7705477..8c4fd03 100644 --- a/Documentation/devicetree/bindings/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/serial/of-serial.txt
@@ -14,6 +14,7 @@ - "altr,16550-FIFO32" - "altr,16550-FIFO64" - "altr,16550-FIFO128" + - "fsl,16550-FIFO64" - "serial" if the port type is unknown. - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. @@ -37,7 +38,6 @@ - auto-flow-control: one way to enable automatic flow control support. The driver is allowed to detect support for the capability even without this property. -- has-hw-flow-control: the hardware has flow control capability. Example:
diff --git a/Documentation/devicetree/bindings/serial/via,vt8500-uart.txt b/Documentation/devicetree/bindings/serial/via,vt8500-uart.txt deleted file mode 100644 index 5feef1e..0000000 --- a/Documentation/devicetree/bindings/serial/via,vt8500-uart.txt +++ /dev/null
@@ -1,17 +0,0 @@ -VIA/Wondermedia VT8500 UART Controller ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-uart" -- reg : Should contain 1 register ranges(address and length) -- interrupts : UART interrupt -- clocks : phandle to the uart source clock (usually a 24Mhz fixed clock) - -Example: - - uart@d8210000 { - compatible = "via,vt8500-uart"; - reg = <0xd8210000 0x1040>; - interrupts = <47>; - clocks = <&ref24>; - };
diff --git a/Documentation/devicetree/bindings/serial/vt8500-uart.txt b/Documentation/devicetree/bindings/serial/vt8500-uart.txt index 795c393..2b64e61 100644 --- a/Documentation/devicetree/bindings/serial/vt8500-uart.txt +++ b/Documentation/devicetree/bindings/serial/vt8500-uart.txt
@@ -1,7 +1,8 @@ * VIA VT8500 and WonderMedia WM8xxx UART Controller Required properties: -- compatible: should be "via,vt8500-uart" +- compatible: should be "via,vt8500-uart" (for VIA/WonderMedia chips up to and + including WM8850/WM8950), or "wm,wm8880-uart" (for WM8880 and later) - reg: base physical address of the controller and length of memory mapped region.
diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt new file mode 100644 index 0000000..337c4ea --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt
@@ -0,0 +1,111 @@ +Keystone Navigator DMA Controller + +This document explains the device tree bindings for the packet dma +on keystone devices. The Keystone Navigator DMA driver sets up the dma +channels and flows for the QMSS(Queue Manager SubSystem) who triggers +the actual data movements across clients using destination queues. Every +client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO), +CRYPTO Engines etc has its own instance of dma hardware. QMSS has also +an internal packet DMA module which is used as an infrastructure DMA +with zero copy. + +Navigator DMA cloud layout: + ------------------ + | Navigator DMAs | + ------------------ + | + |-> DMA instance #0 + | + |-> DMA instance #1 + . + . + | + |-> DMA instance #n + +Navigator DMA properties: +Required properties: + - compatible: Should be "ti,keystone-navigator-dma" + - clocks: phandle to dma instances clocks. The clock handles can be as + many as the dma instances. The order should be maintained as per + the dma instances. + - ti,navigator-cloud-address: Should contain base address for the multi-core + navigator cloud and number of addresses depends on SOC integration + configuration.. Navigator cloud global address needs to be programmed + into DMA and the DMA uses it as the physical addresses to reach queue + managers. Note that these addresses though points to queue managers, + they are relevant only from DMA perspective. The QMSS may not choose to + use them since it has a different address space view to reach all + its components. + +DMA instance properties: +Required properties: + - reg: Should contain register location and length of the following dma + register regions. Register regions should be specified in the following + order. + - Global control register region (global). + - Tx DMA channel configuration register region (txchan). + - Rx DMA channel configuration register region (rxchan). + - Tx DMA channel Scheduler configuration register region (txsched). + - Rx DMA flow configuration register region (rxflow). + +Optional properties: + - reg-names: Names for the register regions. + - ti,enable-all: Enable all DMA channels vs clients opening specific channels + what they need. This property is useful for the userspace fast path + case where the linux drivers enables the channels used by userland + stack. + - ti,loop-back: To loopback Tx streaming I/F to Rx streaming I/F. Used for + infrastructure transfers. + - ti,rx-retry-timeout: Number of dma cycles to wait before retry on buffer + starvation. + +Example: + + knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + clocks = <&papllclk>, <&clkxge>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,navigator-cloud-address = <0x23a80000 0x23a90000 + 0x23aa0000 0x23ab0000>; + + dma_gbe: dma_gbe@0 { + reg = <0x2004000 0x100>, + <0x2004400 0x120>, + <0x2004800 0x300>, + <0x2004c00 0x120>, + <0x2005000 0x400>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; + + dma_xgbe: dma_xgbe@0 { + reg = <0x2fa1000 0x100>, + <0x2fa1400 0x200>, + <0x2fa1800 0x200>, + <0x2fa1c00 0x200>, + <0x2fa2000 0x400>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; + }; + +Navigator DMA client: +Required properties: + - ti,navigator-dmas: List of one or more DMA specifiers, each consisting of + - A phandle pointing to DMA instance node + - A DMA channel number as a phandle arg. + - ti,navigator-dma-names: Contains dma channel name for each DMA specifier in + the 'ti,navigator-dmas' property. + +Example: + + netcp: netcp@2090000 { + .. + ti,navigator-dmas = <&dma_gbe 22>, + <&dma_gbe 23>, + <&dma_gbe 8>; + ti,navigator-dma-names = "netrx0", "netrx1", "nettx"; + .. + };
diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt new file mode 100644 index 0000000..d8e8cdb --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
@@ -0,0 +1,232 @@ +* Texas Instruments Keystone Navigator Queue Management SubSystem driver + +The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of +the main hardware sub system which forms the backbone of the Keystone +multi-core Navigator. QMSS consist of queue managers, packed-data structure +processors(PDSP), linking RAM, descriptor pools and infrastructure +Packet DMA. +The Queue Manager is a hardware module that is responsible for accelerating +management of the packet queues. Packets are queued/de-queued by writing or +reading descriptor address to a particular memory mapped location. The PDSPs +perform QMSS related functions like accumulation, QoS, or event management. +Linking RAM registers are used to link the descriptors which are stored in +descriptor RAM. Descriptor RAM is configurable as internal or external memory. +The QMSS driver manages the PDSP setups, linking RAM regions, +queue pool management (allocation, push, pop and notify) and descriptor +pool management. + + +Required properties: +- compatible : Must be "ti,keystone-navigator-qmss"; +- clocks : phandle to the reference clock for this device. +- queue-range : <start number> total range of queue numbers for the device. +- linkram0 : <address size> for internal link ram, where size is the total + link ram entries. +- linkram1 : <address size> for external link ram, where size is the total + external link ram entries. If the address is specified as "0" + driver will allocate memory. +- qmgrs : child node describing the individual queue managers on the + SoC. On keystone 1 devices there should be only one node. + On keystone 2 devices there can be more than 1 node. + -- managed-queues : the actual queues managed by each queue manager + instance, specified as <"base queue #" "# of queues">. + -- reg : Address and size of the register set for the device. + Register regions should be specified in the following + order + - Queue Peek region. + - Queue status RAM. + - Queue configuration region. + - Descriptor memory setup region. + - Queue Management/Queue Proxy region for queue Push. + - Queue Management/Queue Proxy region for queue Pop. +- queue-pools : child node classifying the queue ranges into pools. + Queue ranges are grouped into 3 type of pools: + - qpend : pool of qpend(interruptible) queues + - general-purpose : pool of general queues, primarly used + as free descriptor queues or the + transmit DMA queues. + - accumulator : pool of queues on PDSP accumulator channel + Each range can have the following properties: + -- qrange : number of queues to use per queue range, specified as + <"base queue #" "# of queues">. + -- interrupts : Optional property to specify the interrupt mapping + for interruptible queues. The driver additionaly sets + the interrupt affinity hint based on the cpu mask. + -- qalloc-by-id : Optional property to specify that the queues in this + range can only be allocated by queue id. + -- accumulator : Accumulator channel specification. Any of the PDSPs in + QMSS can be loaded with the accumulator firmware. The + accumulator firmware’s job is to poll a select number of + queues looking for descriptors that have been pushed + into them. Descriptors are popped from the queue and + placed in a buffer provided by the host. When the list + becomes full or a programmed time period expires, the + accumulator triggers an interrupt to the host to read + the buffer for descriptor information. This firmware + comes in 16, 32, and 48 channel builds. Each of these + channels can be configured to monitor 32 contiguous + queues. Accumulator channel property is specified as: + <pdsp-id, channel, entries, pacing mode, latency> + pdsp-id : QMSS PDSP running accumulator firmware + on which the channel has to be + configured + channel : Accumulator channel number + entries : Size of the accumulator descriptor list + pacing mode : Interrupt pacing mode + 0 : None, i.e interrupt on list full only + 1 : Time delay since last interrupt + 2 : Time delay since first new packet + 3 : Time delay since last new packet + latency : time to delay the interrupt, specified + in microseconds. + -- multi-queue : Optional property to specify that the channel has to + monitor upto 32 queues starting at the base queue #. +- descriptor-regions : child node describing the memory regions for keystone + navigator packet DMA descriptors. The memory for + descriptors will be allocated by the driver. + -- id : region number in QMSS. + -- region-spec : specifies the number of descriptors in the + region, specified as + <"# of descriptors" "descriptor size">. + -- link-index : start index, i.e. index of the first + descriptor in the region. + +Optional properties: +- dma-coherent : Present if DMA operations are coherent. +- pdsps : child node describing the PDSP configuration. + -- firmware : firmware to be loaded on the PDSP. + -- id : the qmss pdsp that will run the firmware. + -- reg : Address and size of the register set for the PDSP. + Register regions should be specified in the following + order + - PDSP internal RAM region. + - PDSP control/status region registers. + - QMSS interrupt distributor registers. + - PDSP command interface region. + +Example: + +qmss: qmss@2a40000 { + compatible = "ti,keystone-qmss"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&chipclk13>; + ranges; + queue-range = <0 0x4000>; + linkram0 = <0x100000 0x8000>; + linkram1 = <0x0 0x10000>; + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x2000>; + reg = <0x2a40000 0x20000>, + <0x2a06000 0x400>, + <0x2a02000 0x1000>, + <0x2a03000 0x1000>, + <0x23a80000 0x20000>, + <0x2a80000 0x20000>; + }; + + qmgr1 { + managed-queues = <0x2000 0x2000>; + reg = <0x2a60000 0x20000>, + <0x2a06400 0x400>, + <0x2a04000 0x1000>, + <0x2a05000 0x1000>, + <0x23aa0000 0x20000>, + <0x2aa0000 0x20000>; + }; + }; + queue-pools { + qpend { + qpend-0 { + qrange = <658 8>; + interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; + }; + qpend-1 { + qrange = <8704 16>; + interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04 + 0 51 0xf04 0 52 0xf04 0 53 0xf04 + 0 54 0xf04 0 55 0xf04 0 56 0xf04 + 0 57 0xf04 0 58 0xf04 0 59 0xf04 + 0 60 0xf04 0 61 0xf04 0 62 0xf04 + 0 63 0xf04>; + qalloc-by-id; + }; + qpend-2 { + qrange = <8720 16>; + interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04 + 0 59 0xf04 0 68 0xf04 0 69 0xf04 + 0 70 0xf04 0 71 0xf04 0 72 0xf04 + 0 73 0xf04 0 74 0xf04 0 75 0xf04 + 0 76 0xf04 0 77 0xf04 0 78 0xf04 + 0 79 0xf04>; + }; + }; + general-purpose { + gp-0 { + qrange = <4000 64>; + }; + netcp-tx { + qrange = <640 9>; + qalloc-by-id; + }; + }; + accumulator { + acc-0 { + qrange = <128 32>; + accumulator = <0 36 16 2 50>; + interrupts = <0 215 0xf01>; + multi-queue; + qalloc-by-id; + }; + acc-1 { + qrange = <160 32>; + accumulator = <0 37 16 2 50>; + interrupts = <0 216 0xf01>; + multi-queue; + }; + acc-2 { + qrange = <192 32>; + accumulator = <0 38 16 2 50>; + interrupts = <0 217 0xf01>; + multi-queue; + }; + acc-3 { + qrange = <224 32>; + accumulator = <0 39 16 2 50>; + interrupts = <0 218 0xf01>; + multi-queue; + }; + }; + }; + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <8192 128>; /* num_desc desc_size */ + link-index = <0x4000>; + }; + }; + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + firmware = "keystone/qmss_pdsp_acc48_k2_le_1_0_0_8.fw"; + reg = <0x2a10000 0x1000>, + <0x2a0f000 0x100>, + <0x2a0c000 0x3c8>, + <0x2a20000 0x4000>; + id = <0>; + }; + }; +}; /* qmss */
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt b/Documentation/devicetree/bindings/sound/adi,ssm2602.txt new file mode 100644 index 0000000..3b3302f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,ssm2602.txt
@@ -0,0 +1,19 @@ +Analog Devices SSM2602, SSM2603 and SSM2604 I2S audio CODEC devices + +SSM2602 support both I2C and SPI as the configuration interface, +the selection is made by the MODE strap-in pin. +SSM2603 and SSM2604 only support I2C as the configuration interface. + +Required properties: + + - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604" + + - reg : the I2C address of the device for I2C, the chip select + number for SPI. + + Example: + + ssm2602: ssm2602@1a { + compatible = "adi,ssm2602"; + reg = <0x1a>; + };
diff --git a/Documentation/devicetree/bindings/sound/cs35l32.txt b/Documentation/devicetree/bindings/sound/cs35l32.txt new file mode 100644 index 0000000..1417d3f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs35l32.txt
@@ -0,0 +1,62 @@ +CS35L32 audio CODEC + +Required properties: + + - compatible : "cirrus,cs35l32" + + - reg : the I2C address of the device for I2C. Address is determined by the level + of the AD0 pin. Level 0 is 0x40 while Level 1 is 0x41. + + - VA-supply, VP-supply : power supplies for the device, + as covered in Documentation/devicetree/bindings/regulator/regulator.txt. + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + + - cirrus,boost-manager : Boost voltage control. + 0 = Automatically managed. Boost-converter output voltage is the higher + of the two: Class G or adaptive LED voltage. + 1 = Automatically managed irrespective of audio, adapting for low-power + dissipation when LEDs are ON, and operating in Fixed-Boost Bypass Mode + if LEDs are OFF (VBST = VP). + 2 = (Default) Boost voltage fixed in Bypass Mode (VBST = VP). + 3 = Boost voltage fixed at 5 V. + + - cirrus,sdout-datacfg : Data configuration for dual CS35L32 applications only. + Determines the data packed in a two-CS35L32 configuration. + 0 = Left/right channels VMON[11:0], IMON[11:0], VPMON[7:0]. + 1 = Left/right channels VMON[11:0], IMON[11:0], STATUS. + 2 = (Default) left/right channels VMON[15:0], IMON [15:0]. + 3 = Left/right channels VPMON[7:0], STATUS. + + - cirrus,sdout-share : SDOUT sharing. Determines whether one or two CS35L32 + devices are on board sharing SDOUT. + 0 = (Default) One IC. + 1 = Two IC's. + + - cirrus,battery-recovery : Low battery nominal recovery threshold, rising VP. + 0 = 3.1V + 1 = 3.2V + 2 = 3.3V (Default) + 3 = 3.4V + + - cirrus,battery-threshold : Low battery nominal threshold, falling VP. + 0 = 3.1V + 1 = 3.2V + 2 = 3.3V + 3 = 3.4V (Default) + 4 = 3.5V + 5 = 3.6V + +Example: + +codec: codec@40 { + compatible = "cirrus,cs35l32"; + reg = <0x40>; + reset-gpios = <&gpio 10 0>; + cirrus,boost-manager = <0x03>; + cirrus,sdout-datacfg = <0x02>; + VA-supply = <®_audio>; +};
diff --git a/Documentation/devicetree/bindings/sound/es8328.txt b/Documentation/devicetree/bindings/sound/es8328.txt new file mode 100644 index 0000000..30ea8a3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/es8328.txt
@@ -0,0 +1,38 @@ +Everest ES8328 audio CODEC + +This device supports both I2C and SPI. + +Required properties: + + - compatible : "everest,es8328" + - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V + - AVDD-supply : Regulator providing analog supply voltage 3.3V + - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V + - IPVDD-supply : Regulator providing analog output voltage 3.3V + - clocks : A 22.5792 or 11.2896 MHz clock + - reg : the I2C address of the device for I2C, the chip select number for SPI + +Pins on the device (for linking into audio routes): + + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * LINPUT1 + * RINPUT1 + * LINPUT2 + * RINPUT2 + * Mic Bias + + +Example: + +codec: es8328@11 { + compatible = "everest,es8328"; + DVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + PVDD-supply = <®_3p3v>; + HPVDD-supply = <®_3p3v>; + clocks = <&clks 169>; + reg = <0x11>; +};
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index aeb8c4a..52f5b6b 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -7,7 +7,8 @@ Required properties: - - compatible : Compatible list, must contain "fsl,imx35-esai". + - compatible : Compatible list, must contain "fsl,imx35-esai" or + "fsl,vf610-esai" - reg : Offset and length of the register set for the device.
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt index 3aa4a8f..5b76be4 100644 --- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt +++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -58,13 +58,7 @@ Documentation/devicetree/bindings/dma/dma.txt. - dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq is not defined. -- fsl,mode: The operating mode for the SSI interface. - "i2s-slave" - I2S mode, SSI is clock slave - "i2s-master" - I2S mode, SSI is clock master - "lj-slave" - left-justified mode, SSI is clock slave - "lj-master" - l.j. mode, SSI is clock master - "rj-slave" - right-justified mode, SSI is clock slave - "rj-master" - r.j., SSI is clock master +- fsl,mode: The operating mode for the AC97 interface only. "ac97-slave" - AC97 mode, SSI is clock slave "ac97-master" - AC97 mode, SSI is clock master
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt new file mode 100644 index 0000000..a96774c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -0,0 +1,82 @@ +Freescale Generic ASoC Sound Card with ASRC support + +The Freescale Generic ASoC Sound Card can be used, ideally, for all Freescale +SoCs connecting with external CODECs. + +The idea of this generic sound card is a bit like ASoC Simple Card. However, +for Freescale SoCs (especially those released in recent years), most of them +have ASRC (Documentation/devicetree/bindings/sound/fsl,asrc.txt) inside. And +this is a specific feature that might be painstakingly controlled and merged +into the Simple Card. + +So having this generic sound card allows all Freescale SoC users to benefit +from the simplification of a new card support and the capability of the wide +sample rates support through ASRC. + +Note: The card is initially designed for those sound cards who use I2S and + PCM DAI formats. However, it'll be also possible to support those non + I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as long + as the driver has been properly upgraded. + + +The compatible list for this generic sound card currently: + "fsl,imx-audio-cs42888" + + "fsl,imx-audio-wm8962" + (compatible with Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt) + + "fsl,imx-audio-sgtl5000" + (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt) + +Required properties: + + - compatible : Contains one of entries in the compatible list. + + - model : The user-visible name of this sound complex + + - audio-cpu : The phandle of an CPU DAI controller + + - audio-codec : The phandle of an audio codec + + - audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. There're a few pre-designed board connectors: + * Line Out Jack + * Line In Jack + * Headphone Jack + * Mic Jack + * Ext Spk + * AMIC (stands for Analog Microphone Jack) + * DMIC (stands for Digital Microphone Jack) + + Note: The "Mic Jack" and "AMIC" are redundant while + coexsiting in order to support the old bindings + of wm8962 and sgtl5000. + +Optional properties: + + - audio-asrc : The phandle of ASRC. It can be absent if there's no + need to add ASRC support via DPCM. + +Example: +sound-cs42888 { + compatible = "fsl,imx-audio-cs42888"; + model = "cs42888-audio"; + audio-cpu = <&esai>; + audio-asrc = <&asrc>; + audio-codec = <&cs42888>; + audio-routing = + "Line Out Jack", "AOUT1L", + "Line Out Jack", "AOUT1R", + "Line Out Jack", "AOUT2L", + "Line Out Jack", "AOUT2R", + "Line Out Jack", "AOUT3L", + "Line Out Jack", "AOUT3R", + "Line Out Jack", "AOUT4L", + "Line Out Jack", "AOUT4R", + "AIN1L", "Line In Jack", + "AIN1R", "Line In Jack", + "AIN2L", "Line In Jack", + "AIN2R", "Line In Jack"; +};
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 0f4e238..4956b14 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
@@ -18,12 +18,26 @@ - pinctrl-names: Must contain a "default" entry. - pinctrl-NNN: One property must exist for each entry in pinctrl-names. See ../pinctrl/pinctrl-bindings.txt for details of the property values. -- big-endian-regs: If this property is absent, the little endian mode will - be in use as default, or the big endian mode will be in use for all the - device registers. -- big-endian-data: If this property is absent, the little endian mode will - be in use as default, or the big endian mode will be in use for all the - fifo data. +- big-endian: Boolean property, required if all the FTM_PWM registers + are big-endian rather than little-endian. +- lsb-first: Configures whether the LSB or the MSB is transmitted first for + the fifo data. If this property is absent, the MSB is transmitted first as + default, or the LSB is transmitted first. +- fsl,sai-synchronous-rx: This is a boolean property. If present, indicating + that SAI will work in the synchronous mode (sync Tx with Rx) which means + both the transimitter and receiver will send and receive data by following + receiver's bit clocks and frame sync clocks. +- fsl,sai-asynchronous: This is a boolean property. If present, indicating + that SAI will work in the asynchronous mode, which means both transimitter + and receiver will send and receive data by following their own bit clocks + and frame sync clocks separately. + +Note: +- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the + default synchronous mode (sync Rx with Tx) will be used, which means both + transimitter and receiver will send and receive data by following clocks + of transimitter. +- fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive. Example: sai2: sai@40031000 { @@ -38,6 +52,6 @@ dma-names = "tx", "rx"; dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>; - big-endian-regs; - big-endian-data; + big-endian; + lsb-first; };
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt b/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt new file mode 100644 index 0000000..07b68ab --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
@@ -0,0 +1,60 @@ +Freescale i.MX audio complex with ES8328 codec + +Required properties: +- compatible : "fsl,imx-audio-es8328" +- model : The user-visible name of this sound complex +- ssi-controller : The phandle of the i.MX SSI controller +- jack-gpio : Optional GPIO for headphone jack +- audio-amp-supply : Power regulator for speaker amps +- audio-codec : The phandle of the ES8328 audio codec +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names could be power supplies, ES8328 + pins, and the jacks on the board: + + Power supplies: + * audio-amp + + ES8328 pins: + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * LINPUT1 + * LINPUT2 + * RINPUT1 + * RINPUT2 + * Mic PGA + + Board connectors: + * Headphone + * Speaker + * Mic Jack +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) +- mux-ext-port : The external port of the i.MX audio muxer (AUDMIX) + +Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual. + +Example: + +sound { + compatible = "fsl,imx-audio-es8328"; + model = "imx-audio-es8328"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + jack-gpio = <&gpio5 15 0>; + audio-amp-supply = <®_audio_amp>; + audio-routing = + "Speaker", "LOUT2", + "Speaker", "ROUT2", + "Speaker", "audio-amp", + "Headphone", "ROUT1", + "Headphone", "LOUT1", + "LINPUT1", "Mic Jack", + "RINPUT1", "Mic Jack", + "Mic Jack", "Mic Bias"; + mux-int-port = <1>; + mux-ext-port = <3>; +};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt index 9c7c55c..c949abc 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt
@@ -25,6 +25,7 @@ Optional properties: - nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in +- nvidia,mic-det-gpios : The GPIO that detect microphones are plugged in Example:
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 6c55fcf..9b82c20 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -31,7 +31,7 @@ #address-cells = <1>; #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; };
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt new file mode 100644 index 0000000..0701b83 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -0,0 +1,59 @@ +RT5677 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt5677". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +- gpio-controller : Indicates this device is a GPIO controller. + +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). + +Optional properties: + +- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin. + +- realtek,in1-differential +- realtek,in2-differential +- realtek,lout1-differential +- realtek,lout2-differential +- realtek,lout3-differential + Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential, + rather than single-ended. + +Pins on the device (for linking into audio routes): + + * IN1P + * IN1N + * IN2P + * IN2N + * MICBIAS1 + * DMIC1 + * DMIC2 + * DMIC3 + * DMIC4 + * LOUT1 + * LOUT2 + * LOUT3 + +Example: + +rt5677 { + compatible = "realtek,rt5677"; + reg = <0x2c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + realtek,pow-ldo2-gpio = + <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + realtek,in1-differential = "true"; +};
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 955df60..d556dcb 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt
@@ -7,10 +7,20 @@ - clocks : the clock provider of SYS_MCLK +- VDDA-supply : the regulator provider of VDDA + +- VDDIO-supply: the regulator provider of VDDIO + +Optional properties: + +- VDDD-supply : the regulator provider of VDDD + Example: codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 150>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; };
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index c2e9841..c3cba60 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -17,6 +17,10 @@ source. - simple-audio-card,mclk-fs : Multiplication factor between stream rate and codec mclk. +- simple-audio-card,hp-det-gpio : Reference to GPIO that signals when + headphones are attached. +- simple-audio-card,mic-det-gpio : Reference to GPIO that signals when + a microphone is attached. Optional subnodes:
diff --git a/Documentation/devicetree/bindings/sound/ssm4567.txt b/Documentation/devicetree/bindings/sound/ssm4567.txt new file mode 100644 index 0000000..ec3d9e7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ssm4567.txt
@@ -0,0 +1,15 @@ +Analog Devices SSM4567 audio amplifier + +This device supports I2C only. + +Required properties: + - compatible : Must be "adi,ssm4567" + - reg : the I2C address of the device. This will either be 0x34 (LR_SEL/ADDR connected to AGND), + 0x35 (LR_SEL/ADDR connected to IOVDD) or 0x36 (LR_SEL/ADDR open). + +Example: + + ssm4567: ssm4567@34 { + compatible = "adi,ssm4567"; + reg = <0x34>; + };
diff --git a/Documentation/devicetree/bindings/sound/st,sta350.txt b/Documentation/devicetree/bindings/sound/st,sta350.txt index b7e71bf..307398e 100644 --- a/Documentation/devicetree/bindings/sound/st,sta350.txt +++ b/Documentation/devicetree/bindings/sound/st,sta350.txt
@@ -33,7 +33,7 @@ 0: Channel 1 1: Channel 2 2: Channel 3 - If parameter is missing, channel 1 is choosen. + If parameter is missing, channel 1 is chosen. This properties have to be specified as '/bits/ 8' values. - st,thermal-warning-recover:
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 4256a6d..aad527b 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -7,6 +7,9 @@ - interrupts : Should contain CSPI/eCSPI interrupt - fsl,spi-num-chipselects : Contains the number of the chipselect - cs-gpios : Specifies the gpio pins to be used for chipselects. +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names should include "tx" and "rx" if present. Example: @@ -19,4 +22,6 @@ fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */ <&gpio3 25 0>; /* GPIO3_25 */ + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; };
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index f24baf3..d11c372 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -6,8 +6,17 @@ "renesas,sh-mobile-msiof" for SH Mobile series. Examples with soctypes are: "renesas,msiof-r8a7790" (R-Car H2) - "renesas,msiof-r8a7791" (R-Car M2) -- reg : Offset and length of the register set for the device + "renesas,msiof-r8a7791" (R-Car M2-W) + "renesas,msiof-r8a7792" (R-Car V2H) + "renesas,msiof-r8a7793" (R-Car M2-N) + "renesas,msiof-r8a7794" (R-Car E2) +- reg : A list of offsets and lengths of the register sets for + the device. + If only one register set is present, it is to be used + by both the CPU and the DMA engine. + If two register sets are present, the first is to be + used by the CPU, and the second is to be used by the + DMA engine. - interrupt-parent : The phandle for the interrupt controller that services interrupts for this device - interrupts : Interrupt specifier @@ -17,12 +26,16 @@ Optional properties: - clocks : Must contain a reference to the functional clock. - num-cs : Total number of chip-selects (default is 1) +- dmas : Must contain a list of two references to DMA + specifiers, one for transmission, and one for + reception. +- dma-names : Must contain a list of two DMA names, "tx" and "rx". Optional properties, deprecated for soctype-specific bindings: - renesas,tx-fifo-size : Overrides the default tx fifo size given in words (default is 64) - renesas,rx-fifo-size : Overrides the default rx fifo size given in words - (default is 64, or 256 on R-Car H2 and M2) + (default is 64, or 256 on R-Car Gen2) Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. @@ -31,9 +44,11 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled";
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index f80887b..12ecfe9 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -1,5 +1,10 @@ Davinci SPI controller device bindings +Links on DM: +Keystone 2 - http://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf +dm644x - http://www.ti.com/lit/ug/sprue32a/sprue32a.pdf +OMAP-L138/da830 - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf + Required properties: - #address-cells: number of cells required to define a chip select address on the SPI bus. Should be set to 1. @@ -24,6 +29,30 @@ cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>; where first three are internal CS and last two are GPIO CS. +Optional properties for slave devices: +SPI slave nodes can contain the following properties. +Not all SPI Peripherals from Texas Instruments support this. +Please check SPI peripheral documentation for a device before using these. + +- ti,spi-wdelay : delay between transmission of words + (SPIFMTn.WDELAY, SPIDAT1.WDEL) must be specified in number of SPI module + clock periods. + + delay = WDELAY * SPI_module_clock_period + 2 * SPI_module_clock_period + +Below is timing diagram which shows functional meaning of +"ti,spi-wdelay" parameter. + + +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +SPI_CLK | | | | | | | | | | | | | | | | + +----------+ +-+ +-+ +-+ +-+ +---------------------------+ +-+ +-+ +- + +SPI_SOMI/SIMO+-----------------+ +----------- + +----------+ word1 +---------------------------+word2 + +-----------------+ +----------- + WDELAY + <--------------------------> + Example of a NOR flash slave device (n25q032) connected to DaVinci SPI controller device over the SPI bus. @@ -43,6 +72,7 @@ compatible = "st,m25p32"; spi-max-frequency = <25000000>; reg = <0>; + ti,spi-wdelay = <8>; partition@0 { label = "u-boot-spl";
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 5376de4..cbbe16e 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -10,7 +10,12 @@ - pinctrl-names: must contain a "default" entry. - spi-num-chipselects : the number of the chipselect signals. - bus-num : the slave chip chipselect signal number. -- big-endian : if DSPI modudle is big endian, the bool will be set in node. + +Optional property: +- big-endian: If present the dspi device's registers are implemented + in big endian mode, otherwise in native mode(same with CPU), for more + detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. + Example: dspi0@4002c000 {
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt index a3ff50f..50c3a3d 100644 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -1,7 +1,7 @@ Marvell Orion SPI device Required properties: -- compatible : should be "marvell,orion-spi". +- compatible : should be "marvell,orion-spi" or "marvell,armada-370-spi". - reg : offset and length of the register set for the device - cell-index : Which of multiple SPI controllers is this. Optional properties:
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt index 7bab355..467dec4 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -16,11 +16,15 @@ - clocks: Must contain an entry for each entry in clock-names. - clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for the peripheral clock. +- #address-cells: should be 1. +- #size-cells: should be 0. + +Optional Properties: + - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. -- #address-cells: should be 1. -- #size-cells: should be 0. + Example:
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt index d57d82a..8f4169f 100644 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -11,7 +11,10 @@ - "renesas,rspi-sh7757" (SH) - "renesas,rspi-r7s72100" (RZ/A1H) - "renesas,qspi-r8a7790" (R-Car H2) - - "renesas,qspi-r8a7791" (R-Car M2) + - "renesas,qspi-r8a7791" (R-Car M2-W) + - "renesas,qspi-r8a7792" (R-Car V2H) + - "renesas,qspi-r8a7793" (R-Car M2-N) + - "renesas,qspi-r8a7794" (R-Car E2) - reg : Address start and address range size of the device - interrupts : A list of interrupt-specifiers, one for each entry in interrupt-names. @@ -30,6 +33,9 @@ Optional properties: - clocks : Must contain a reference to the functional clock. +- dmas : Must contain a list of two references to DMA specifiers, + one for transmission, and one for reception. +- dma-names : Must contain a list of two DMA names, "tx" and "rx". Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. @@ -58,4 +64,6 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; };
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt index 578a1fc..443bcb6 100644 --- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt +++ b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
@@ -56,6 +56,9 @@ - fsl,data-width : should be <18> or <24> - port: A port node with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + On i.MX5, the internal two-input-multiplexer is used. + Due to hardware limitations, only one port (port@[0,1]) + can be used for each channel (lvds-channel@[0,1], respectively) On i.MX6, there should be four ports (port@[0-3]) that correspond to the four LVDS multiplexer inputs. @@ -78,6 +81,8 @@ "di0", "di1"; lvds-channel@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; fsl,data-mapping = "spwg"; fsl,data-width = <24>; @@ -86,7 +91,9 @@ /* ... */ }; - port { + port@0 { + reg = <0>; + lvds0_in: endpoint { remote-endpoint = <&ipu_di0_lvds0>; }; @@ -94,6 +101,8 @@ }; lvds-channel@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; fsl,data-mapping = "spwg"; fsl,data-width = <24>; @@ -102,7 +111,9 @@ /* ... */ }; - port { + port@1 { + reg = <1>; + lvds1_in: endpoint { remote-endpoint = <&ipu_di1_lvds1>; };
diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt index 042a027..b7ba01a 100644 --- a/Documentation/devicetree/bindings/submitting-patches.txt +++ b/Documentation/devicetree/bindings/submitting-patches.txt
@@ -12,6 +12,9 @@ devicetree@vger.kernel.org + 3) The Documentation/ portion of the patch should come in the series before + the code implementing the binding. + II. For kernel maintainers 1) If you aren't comfortable reviewing a given binding, reply to it and ask
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 1f0f672..3c67bd5 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
@@ -1,7 +1,10 @@ * Temperature Monitor (TEMPMON) on Freescale i.MX SoCs Required properties: -- compatible : "fsl,imx6q-thermal" +- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX. + i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC, + when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature + is higher than panic threshold, system will auto reboot by SRC module. - fsl,tempmon : phandle pointer to system controller that contains TEMPMON control registers, e.g. ANATOP on imx6q. - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt new file mode 100644 index 0000000..a092053 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
@@ -0,0 +1,15 @@ +Amlogic Meson6 SoCs Timer Controller + +Required properties: + +- compatible : should be "amlogic,meson6-timer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupt of the first timer + +Example: + +timer@c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x14>; + interrupts = <0 10 1>; +};
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt index a17418b..1a05c1b 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -11,15 +11,47 @@ Required Properties: - - compatible: must contain one of the following. - - "renesas,cmt-32" for the 32-bit CMT + - compatible: must contain one or more of the following: + - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT + (CMT0) + - "renesas,cmt-32-sh7372" for the sh7372 32-bit CMT + (CMT0) + - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT + (CMT0) + - "renesas,cmt-32" for all 32-bit CMT without fast clock support (CMT0 on sh7372, sh73a0 and r8a7740) - - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support + This is a fallback for the above renesas,cmt-32-* entries. + + - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast + clock support (CMT[234]) + - "renesas,cmt-32-fast-sh7372" for the sh7372 32-bit CMT with fast + clock support (CMT[234]) + - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast + clock support (CMT[234]) + - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support (CMT[234] on sh7372, sh73a0 and r8a7740) - - "renesas,cmt-48" for the 48-bit CMT + This is a fallback for the above renesas,cmt-32-fast-* entries. + + - "renesas,cmt-48-sh7372" for the sh7372 48-bit CMT + (CMT1) + - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT + (CMT1) + - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT + (CMT1) + - "renesas,cmt-48" for all non-second generation 48-bit CMT (CMT1 on sh7372, sh73a0 and r8a7740) - - "renesas,cmt-48-gen2" for the second generation 48-bit CMT + This is a fallback for the above renesas,cmt-48-* entries. + + - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT + (CMT[01]) + - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT + (CMT[01]) + - "renesas,cmt-48-r8a7791" for the r8a7791 48-bit CMT + (CMT[01]) + - "renesas,cmt-48-gen2" for all second generation 48-bit CMT (CMT[01] on r8a73a4, r8a7790 and r8a7791) + This is a fallback for the renesas,cmt-48-r8a73a4, + renesas,cmt-48-r8a7790 and renesas,cmt-48-r8a7791 entries. - reg: base address and length of the registers block for the timer module. - interrupts: interrupt-specifier for the timer, one per channel. @@ -36,7 +68,7 @@ them channels 0 and 1 in the documentation. cmt0: timer@ffca0000 { - compatible = "renesas,cmt-48-gen2"; + compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, <0 142 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt index 917453f..d9a8d5a 100644 --- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt +++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
@@ -8,7 +8,10 @@ Required Properties: - - compatible: must contain "renesas,mtu2" + - compatible: must be one or more of the following: + - "renesas,mtu2-r7s72100" for the r7s72100 MTU2 + - "renesas,mtu2" for any MTU2 + This is a fallback for the above renesas,mtu2-* entries - reg: base address and length of the registers block for the timer module. @@ -26,7 +29,7 @@ Example: R7S72100 (RZ/A1H) MTU2 node mtu2: timer@fcff0000 { - compatible = "renesas,mtu2"; + compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; reg = <0xfcff0000 0x400>; interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>, <0 146 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt index 425d0c5..7db89fb 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@@ -8,7 +8,10 @@ Required Properties: - - compatible: must contain "renesas,tmu" + - compatible: must contain one or more of the following: + - "renesas,tmu-r8a7779" for the r8a7779 TMU + - "renesas,tmu" for any TMU. + This is a fallback for the above renesas,tmu-* entries - reg: base address and length of the registers block for the timer module. @@ -27,7 +30,7 @@ Example: R8A7779 (R-Car H1) TMU0 node tmu0: timer@ffd80000 { - compatible = "renesas,tmu"; + compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd80000 0x30>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, <0 33 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 20468b2..5357919 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -8,9 +8,50 @@ - interrupts : <interrupt mapping for UFS host controller IRQ> - reg : <registers mapping> +Optional properties: +- vdd-hba-supply : phandle to UFS host controller supply regulator node +- vcc-supply : phandle to VCC supply regulator node +- vccq-supply : phandle to VCCQ supply regulator node +- vccq2-supply : phandle to VCCQ2 supply regulator node +- vcc-supply-1p8 : For embedded UFS devices, valid VCC range is 1.7-1.95V + or 2.7-3.6V. This boolean property when set, specifies + to use low voltage range of 1.7-1.95V. Note for external + UFS cards this property is invalid and valid VCC range is + always 2.7-3.6V. +- vcc-max-microamp : specifies max. load that can be drawn from vcc supply +- vccq-max-microamp : specifies max. load that can be drawn from vccq supply +- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply +- <name>-fixed-regulator : boolean property specifying that <name>-supply is a fixed regulator + +- clocks : List of phandle and clock specifier pairs +- clock-names : List of clock input name strings sorted in the same + order as the clocks property. +- freq-table-hz : Array of <min max> operating frequencies stored in the same + order as the clocks property. If this property is not + defined or a value in the array is "0" then it is assumed + that the frequency is set by the parent clock or a + fixed rate clock source. + +Note: If above properties are not defined it can be assumed that the supply +regulators or clocks are always on. + Example: ufshc@0xfc598000 { compatible = "jedec,ufs-1.1"; reg = <0xfc598000 0x800>; interrupts = <0 28 0>; + + vdd-hba-supply = <&xxx_reg0>; + vdd-hba-fixed-regulator; + vcc-supply = <&xxx_reg1>; + vcc-supply-1p8; + vccq-supply = <&xxx_reg2>; + vccq2-supply = <&xxx_reg3>; + vcc-max-microamp = 500000; + vccq-max-microamp = 200000; + vccq2-max-microamp = 200000; + + clocks = <&core 0>, <&ref 0>, <&iface 0>; + clock-names = "core_clk", "ref_clk", "iface_clk"; + freq-table-hz = <100000000 200000000>, <0 0>, <0 0>; };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt index 1bae71e..38a5480 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
@@ -19,6 +19,7 @@ - disable-over-current: disable over current detect - external-vbus-divider: enables off-chip resistor divider for Vbus - maximum-speed: limit the maximum connection speed to "full-speed". +- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts Examples: usb@02184000 { /* USB OTG */ @@ -30,4 +31,5 @@ disable-over-current; external-vbus-divider; maximum-speed = "full-speed"; + tpl-support; };
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 467ddd1..482f815 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -4,6 +4,9 @@ Required properties: - compatible : One of: - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. + - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; + - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; + - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - snps,dwc2: A generic DWC2 USB controller with default parameters. - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt @@ -15,6 +18,8 @@ - phys: phy provider specifier - phy-names: shall be "usb2-phy" Refer to phy/phy-bindings.txt for generic phy consumer properties +- dr_mode: shall be one of "host", "peripheral" and "otg" + Refer to usb/generic.txt Example:
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt new file mode 100644 index 0000000..f9d7025 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -0,0 +1,68 @@ +ST DWC3 glue logic + +This file documents the parameters for the dwc3-st driver. +This driver controls the glue logic used to configure the dwc3 core on +STiH407 based platforms. + +Required properties: + - compatible : must be "st,stih407-dwc3" + - reg : glue logic base address and USB syscfg ctrl register offset + - reg-names : should be "reg-glue" and "syscfg-reg" + - st,syscon : should be phandle to system configuration node which + encompasses the glue registers + - resets : list of phandle and reset specifier pairs. There should be two entries, one + for the powerdown and softreset lines of the usb3 IP + - reset-names : list of reset signal names. Names should be "powerdown" and "softreset" +See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/reset.txt + + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property + + - pinctl-names : A pinctrl state named "default" must be defined +See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + + - pinctrl-0 : Pin control group +See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + + - ranges : allows valid 1:1 translation between child's address space and + parent's address space + +Sub-nodes: +The dwc3 core should be added as subnode to ST DWC3 glue as shown in the +example below. The DT binding details of dwc3 can be found in: +Documentation/devicetree/bindings/usb/dwc3.txt + +NB: The dr_mode property described in [1] is NOT optional for this driver, as the default value +is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host" +or "device". + +[1] Documentation/devicetree/bindings/usb/generic.txt + +Example: + +st_dwc3: dwc3@8f94000 { + status = "disabled"; + compatible = "st,stih407-dwc3"; + reg = <0x08f94000 0x1000>, <0x110 0x4>; + reg-names = "reg-glue", "syscfg-reg"; + st,syscfg = <&syscfg_core>; + resets = <&powerdown STIH407_USB3_POWERDOWN>, + <&softreset STIH407_MIPHY2_SOFTRESET>; + reset-names = "powerdown", + "softreset"; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + ranges; + + dwc3: dwc3@9900000 { + compatible = "snps,dwc3"; + reg = <0x09900000 0x100000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; + dr_mode = "host"; + phys-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>; + }; +};
diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt new file mode 100644 index 0000000..fb45fa5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt
@@ -0,0 +1,39 @@ +ST USB EHCI controller + +Required properties: + - compatible : must be "st,st-ehci-300x" + - reg : physical base addresses of the controller and length of memory mapped + region + - interrupts : one EHCI interrupt should be described here + - pinctrl-names : a pinctrl state named "default" must be defined + - pinctrl-0 : phandle referencing pin configuration of the USB controller +See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + - clocks : phandle list of usb clocks + - clock-names : should be "ic" for interconnect clock and "clk48" +See: Documentation/devicetree/bindings/clock/clock-bindings.txt + + - phys : phandle for the PHY device + - phy-names : should be "usb" + - resets : phandle + reset specifier pairs to the powerdown and softreset lines + of the USB IP + - reset-names : should be "power" and "softreset" +See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/reset.txt + +Example: + + ehci1: usb@0xfe203e00 { + compatible = "st,st-ehci-300x"; + reg = <0xfe203e00 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&clk_s_a1_ls 0>; + phys = <&usb2_phy>; + phy-names = "usb"; + status = "okay"; + + resets = <&powerdown STIH416_USB1_POWERDOWN>, + <&softreset STIH416_USB1_SOFTRESET>; + reset-names = "power", "softreset"; + };
diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt index 96681c9..379b84a 100644 --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -5,6 +5,7 @@ * "fsl,imx23-usbphy" for imx23 and imx28 * "fsl,imx6q-usbphy" for imx6dq and imx6dl * "fsl,imx6sl-usbphy" for imx6sl + * "fsl,vf610-usbphy" for Vybrid vf610 * "fsl,imx6sx-usbphy" for imx6sx "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length
diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt new file mode 100644 index 0000000..6d83937 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt
@@ -0,0 +1,37 @@ +ST USB OHCI controller + +Required properties: + + - compatible : must be "st,st-ohci-300x" + - reg : physical base addresses of the controller and length of memory mapped + region + - interrupts : one OHCI controller interrupt should be described here + - clocks : phandle list of usb clocks + - clock-names : should be "ic" for interconnect clock and "clk48" +See: Documentation/devicetree/bindings/clock/clock-bindings.txt + + - phys : phandle for the PHY device + - phy-names : should be "usb" + + - resets : phandle to the powerdown and reset controller for the USB IP + - reset-names : should be "power" and "softreset". +See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/reset.txt + +Example: + + ohci0: usb@0xfe1ffc00 { + compatible = "st,st-ohci-300x"; + reg = <0xfe1ffc00 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>; + clocks = <&clk_s_a1_ls 0>, + <&clockgen_b0 0>; + clock-names = "ic", "clk48"; + phys = <&usb2_phy>; + phy-names = "usb"; + status = "okay"; + + resets = <&powerdown STIH416_USB0_POWERDOWN>, + <&softreset STIH416_USB0_SOFTRESET>; + reset-names = "power", "softreset"; + };
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt new file mode 100644 index 0000000..ca164e7 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -0,0 +1,66 @@ +Qualcomm SuperSpeed DWC3 USB SoC controller + +Required properties: +- compatible: should contain "qcom,dwc3" +- clocks: A list of phandle + clock-specifier pairs for the + clocks listed in clock-names +- clock-names: Should contain the following: + "core" Master/Core clock, have to be >= 125 MHz for SS + operation and >= 60MHz for HS operation + +Optional clocks: + "iface" System bus AXI clock. Not present on all platforms + "sleep" Sleep clock, used when USB3 core goes into low + power mode (U3). + +Required child node: +A child node must exist to represent the core DWC3 IP block. The name of +the node is not important. The content of the node is defined in dwc3.txt. + +Phy documentation is provided in the following places: +Documentation/devicetree/bindings/phy/qcom,dwc3-usb-phy.txt + +Example device nodes: + + hs_phy: phy@100f8800 { + compatible = "qcom,dwc3-hs-usb-phy"; + reg = <0x100f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "ok"; + }; + + ss_phy: phy@100f8830 { + compatible = "qcom,dwc3-ss-usb-phy"; + reg = <0x100f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "ok"; + }; + + usb3_0: usb30@0 { + compatible = "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "core"; + + ranges; + + status = "ok"; + + dwc3@10000000 { + compatible = "snps,dwc3"; + reg = <0x10000000 0xcd00>; + interrupts = <0 205 0x4>; + phys = <&hs_phy>, <&ss_phy>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + dr_mode = "host"; + }; + }; +
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt new file mode 100644 index 0000000..b08c903 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -0,0 +1,24 @@ +Renesas Electronics USBHS driver + +Required properties: + - compatible: Must contain one of the following: + - "renesas,usbhs-r8a7790" + - "renesas,usbhs-r8a7791" + - reg: Base address and length of the register for the USBHS + - interrupts: Interrupt specifier for the USBHS + - clocks: A list of phandle + clock specifier pairs + +Optional properties: + - renesas,buswait: Integer to use BUSWAIT register + - renesas,enable-gpio: A gpio specifier to check GPIO determining if USB + function should be enabled + - phys: phandle + phy specifier pair + - phy-names: must be "usb" + +Example: + usbhs: usb@e6590000 { + compatible = "renesas,usbhs-r8a7790"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + };
diff --git a/Documentation/devicetree/bindings/usb/udc-xilinx.txt b/Documentation/devicetree/bindings/usb/udc-xilinx.txt new file mode 100644 index 0000000..47b4e39 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/udc-xilinx.txt
@@ -0,0 +1,18 @@ +Xilinx USB2 device controller + +Required properties: +- compatible : Should be "xlnx,usb2-device-4.00.a" +- reg : Physical base address and size of the USB2 + device registers map. +- interrupts : Should contain single irq line of USB2 device + controller +- xlnx,has-builtin-dma : if DMA is included + +Example: + axi-usb2-device@42e00000 { + compatible = "xlnx,usb2-device-4.00.a"; + interrupts = <0x0 0x39 0x1>; + reg = <0x42e00000 0x10000>; + xlnx,has-builtin-dma; + }; +
diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index 221ac0d..52493b1 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt
@@ -8,8 +8,8 @@ if I2C is used. - connect-gpios: Should specify GPIO for connect. - disabled-ports: Should specify the ports unused. - '1' or '2' or '3' are availe for this property to describe the port - number. 1~3 property values are possible to be desribed. + '1' or '2' or '3' are available for this property to describe the port + number. 1~3 property values are possible to be described. Do not describe this property if all ports have to be enabled. - intn-gpios: Should specify GPIO for interrupt. - reset-gpios: Should specify GPIO for reset.
diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index 97ce94e..c101a4b 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
@@ -4,6 +4,7 @@ - #index-cells: Cells used to descibe usb controller index. Should be <1> - compatible: Should be one of below: "fsl,imx6q-usbmisc" for imx6q + "fsl,vf610-usbmisc" for Vybrid vf610 - reg: Should contain registers location and length Examples:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ac7269f..723999d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -14,6 +14,7 @@ altr Altera Corp. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. +amlogic Amlogic, Inc. ams AMS AG amstaos AMS-Taos Inc. apm Applied Micro Circuits Corporation (APM) @@ -29,6 +30,7 @@ capella Capella Microsystems, Inc cavium Cavium, Inc. cdns Cadence Design Systems Inc. +chipidea Chipidea, Inc chrp Common Hardware Reference Platform chunghwa Chunghwa Picture Tubes Ltd. cirrus Cirrus Logic, Inc. @@ -38,24 +40,30 @@ davicom DAVICOM Semiconductor, Inc. denx Denx Software Engineering digi Digi International Inc. +dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG ebv EBV Elektronik edt Emerging Display Technologies emmicro EM Microelectronic +energymicro Silicon Laboratories (formerly Energy Micro AS) epcos EPCOS AG epfl Ecole Polytechnique Fédérale de Lausanne epson Seiko Epson Corp. est ESTeem Wireless Modems eukrea Eukréa Electromatique +everest Everest Semiconductor Co. Ltd. excito Excito +fcs Fairchild Semiconductor fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. +geniatech Geniatech, Inc. globalscale Globalscale Technologies, Inc. gmt Global Mixed-mode Technology, Inc. google Google, Inc. gumstix Gumstix, Inc. +gw Gateworks Corporation haoyu Haoyu Microelectronic Co. Ltd. hisilicon Hisilicon Limited. honeywell Honeywell @@ -65,6 +73,7 @@ idt Integrated Device Technologies, Inc. iom Iomega Corporation img Imagination Technologies Ltd. +innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group isee ISEE 2007 S.L. @@ -83,6 +92,7 @@ mediatek MediaTek Inc. micrel Micrel Inc. microchip Microchip Technology Inc. +mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa mpl MPL AG @@ -124,21 +134,25 @@ silabs Silicon Laboratories simtek sii Seiko Instruments, Inc. +silergy Silergy Corp. sirf SiRF Technology, Inc. +sitronix Sitronix Technology Corporation smsc Standard Microsystems Corporation snps Synopsys, Inc. solidrun SolidRun +sony Sony Corporation spansion Spansion Inc. st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson synology Synology, Inc. +thine THine Electronics, Inc. ti Texas Instruments tlm Trusted Logic Mobility toradex Toradex AG toshiba Toshiba Corporation toumaz Toumaz -usi Universal Scientifc Industrial Co., Ltd. +usi Universal Scientific Industrial Co., Ltd. v3 V3 Semiconductor variscite Variscite Ltd. via VIA Technologies, Inc. @@ -147,6 +161,7 @@ wlf Wolfson Microelectronics wm Wondermedia Technologies, Inc. xes Extreme Engineering Solutions (X-ES) +xillybus Xillybus Ltd. xlnx Xilinx zyxel ZyXEL Communications Corp. zarlink Zarlink Semiconductor
diff --git a/Documentation/devicetree/bindings/video/adi,adv7123.txt b/Documentation/devicetree/bindings/video/adi,adv7123.txt new file mode 100644 index 0000000..a6b2b2b --- /dev/null +++ b/Documentation/devicetree/bindings/video/adi,adv7123.txt
@@ -0,0 +1,50 @@ +Analog Device ADV7123 Video DAC +------------------------------- + +The ADV7123 is a digital-to-analog converter that outputs VGA signals from a +parallel video input. + +Required properties: + +- compatible: Should be "adi,adv7123" + +Optional properties: + +- psave-gpios: Power save control GPIO + +Required nodes: + +The ADV7123 has two video ports. Their connections are modeled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for DPI input +- Video port 1 for VGA output + + +Example +------- + + adv7123: encoder@0 { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7123_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7123_out: endpoint@0 { + remote-endpoint = <&vga_connector_in>; + }; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt index b75af94..f059dd0 100644 --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
@@ -20,6 +20,9 @@ - default-mode: a videomode within the display with timing parameters as specified below. +Optional properties: +- lcd-supply: Regulator for LCD supply voltage. + Example: fb0: fb@0x00500000 { @@ -39,8 +42,8 @@ ----------------------------------------------------- Required properties (as per of_videomode_helper): - - atmel,dmacon: dma controler configuration - - atmel,lcdcon2: lcd controler configuration + - atmel,dmacon: dma controller configuration + - atmel,lcdcon2: lcd controller configuration - atmel,guard-time: lcd guard time (Delay in frame periods) - bits-per-pixel: lcd panel bit-depth.
diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt index 31036c6..e74243b 100644 --- a/Documentation/devicetree/bindings/video/exynos_dsim.txt +++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
@@ -2,6 +2,7 @@ Required properties: - compatible: value should be one of the following + "samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */ "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ - reg: physical base address and length of the registers set for the device
diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt index 0329f60..8c8c2f4 100644 --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
@@ -20,7 +20,7 @@ register is not modified as recommended by the datasheet. - fsl,lpccr: Contrast Control Register value. This property provides the default value for the contrast control register. - If that property is ommited, the register is zeroed. + If that property is omitted, the register is zeroed. - fsl,lscr1: LCDC Sharp Configuration Register value. Example:
diff --git a/Documentation/devicetree/bindings/video/renesas,du.txt b/Documentation/devicetree/bindings/video/renesas,du.txt new file mode 100644 index 0000000..5102830 --- /dev/null +++ b/Documentation/devicetree/bindings/video/renesas,du.txt
@@ -0,0 +1,84 @@ +* Renesas R-Car Display Unit (DU) + +Required Properties: + + - compatible: must be one of the following. + - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU + - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU + - "renesas,du-r8a7791" for R8A7791 (R-Car M2) compatible DU + + - reg: A list of base address and length of each memory resource, one for + each entry in the reg-names property. + - reg-names: Name of the memory resources. The DU requires one memory + resource for the DU core (named "du") and one memory resource for each + LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical + index). + + - interrupt-parent: phandle of the parent interrupt controller. + - interrupts: Interrupt specifiers for the DU interrupts. + + - clocks: A list of phandles + clock-specifier pairs, one for each entry in + the clock-names property. + - clock-names: Name of the clocks. This property is model-dependent. + - R8A7779 uses a single functional clock. The clock doesn't need to be + named. + - R8A7790 and R8A7791 use one functional clock per channel and one clock + per LVDS encoder. The functional clocks must be named "du.x" with "x" + being the channel numerical index. The LVDS clocks must be named + "lvds.x" with "x" being the LVDS encoder numerical index. + +Required nodes: + +The connections to the DU output video ports are modeled using the OF graph +bindings specified in Documentation/devicetree/bindings/graph.txt. + +The following table lists for each supported model the port number +corresponding to each DU output. + + Port 0 Port1 Port2 +----------------------------------------------------------------------------- + R8A7779 (H1) DPAD 0 DPAD 1 - + R8A7790 (H2) DPAD LVDS 0 LVDS 1 + R8A7791 (M2) DPAD LVDS 0 - + + +Example: R8A7790 (R-Car H2) DU + + du: du@feb00000 { + compatible = "renesas,du-r8a7790"; + reg = <0 0xfeb00000 0 0x70000>, + <0 0xfeb90000 0 0x1c>, + <0 0xfeb94000 0 0x1c>; + reg-names = "du", "lvds.0", "lvds.1"; + interrupt-parent = <&gic>; + interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, + <0 268 IRQ_TYPE_LEVEL_HIGH>, + <0 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_DU0>, + <&mstp7_clks R8A7790_CLK_DU1>, + <&mstp7_clks R8A7790_CLK_DU2>, + <&mstp7_clks R8A7790_CLK_LVDS0>, + <&mstp7_clks R8A7790_CLK_LVDS1>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + }; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt index ecc899b..4e6c77c 100644 --- a/Documentation/devicetree/bindings/video/samsung-fimd.txt +++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt
@@ -9,6 +9,7 @@ "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ + "samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */ "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
diff --git a/Documentation/devicetree/bindings/video/thine,thc63lvdm83d b/Documentation/devicetree/bindings/video/thine,thc63lvdm83d new file mode 100644 index 0000000..527e236 --- /dev/null +++ b/Documentation/devicetree/bindings/video/thine,thc63lvdm83d
@@ -0,0 +1,50 @@ +THine Electronics THC63LVDM83D LVDS serializer +---------------------------------------------- + +The THC63LVDM83D is an LVDS serializer designed to support pixel data +transmission between a host and a flat panel. + +Required properties: + +- compatible: Should be "thine,thc63lvdm83d" + +Optional properties: + +- pwdn-gpios: Power down control GPIO + +Required nodes: + +The THC63LVDM83D has two video ports. Their connections are modeled using the +OFgraph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for CMOS/TTL input +- Video port 1 for LVDS output + + +Example +------- + + lvds_enc: encoder@0 { + compatible = "thine,thc63lvdm83d"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint@0 { + remote-endpoint = <&rgb_out>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint@0 { + remote-endpoint = <&panel_in>; + }; + }; + }; + };
diff --git a/Documentation/devicetree/bindings/video/vga-connector.txt b/Documentation/devicetree/bindings/video/vga-connector.txt new file mode 100644 index 0000000..c727f29 --- /dev/null +++ b/Documentation/devicetree/bindings/video/vga-connector.txt
@@ -0,0 +1,36 @@ +VGA Connector +============= + +Required properties: + +- compatible: "vga-connector" + +Optional properties: + +- label: a symbolic name for the connector corresponding to a hardware label +- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC + +Required nodes: + +The VGA connector internal connections are modeled using the OF graph bindings +specified in Documentation/devicetree/bindings/graph.txt. + +The VGA connector has a single port that must be connected to a video source +port. + + +Example +------- + +vga0: connector@0 { + compatible = "vga-connector"; + label = "vga"; + + ddc-i2c-bus = <&i2c3>; + + port { + vga_connector_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; +};
diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt new file mode 100644 index 0000000..c3a36ee --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
@@ -0,0 +1,24 @@ +Zynq Watchdog Device Tree Bindings +------------------------------------------- + +Required properties: +- compatible : Should be "cdns,wdt-r1p2". +- clocks : This is pclk (APB clock). +- interrupts : This is wd_irq - watchdog timeout interrupt. +- interrupt-parent : Must be core interrupt controller. + +Optional properties +- reset-on-timeout : If this property exists, then a reset is done + when watchdog times out. +- timeout-sec : Watchdog timeout value (in seconds). + +Example: + watchdog@f8005000 { + compatible = "cdns,wdt-r1p2"; + clocks = <&clkc 45>; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + reset-on-timeout; + timeout-sec = <10>; + };
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt index e52ba2d..8dab6fd 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
@@ -7,7 +7,8 @@ Optional property: - big-endian: If present the watchdog device's registers are implemented - in big endian mode, otherwise in little mode. + in big endian mode, otherwise in native mode(same with CPU), for more + detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. Examples:
diff --git a/Documentation/devicetree/bindings/watchdog/meson6-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson6-wdt.txt new file mode 100644 index 0000000..9200fc2 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/meson6-wdt.txt
@@ -0,0 +1,13 @@ +Meson SoCs Watchdog timer + +Required properties: + +- compatible : should be "amlogic,meson6-wdt" +- reg : Specifies base physical address and size of the registers. + +Example: + +wdt: watchdog@c1109900 { + compatible = "amlogic,meson6-wdt"; + reg = <0xc1109900 0x8>; +};
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt new file mode 100644 index 0000000..4726924 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt
@@ -0,0 +1,24 @@ +Qualcomm Krait Processor Sub-system (KPSS) Watchdog +--------------------------------------------------- + +Required properties : +- compatible : shall contain only one of the following: + + "qcom,kpss-wdt-msm8960" + "qcom,kpss-wdt-apq8064" + "qcom,kpss-wdt-ipq8064" + +- reg : shall contain base register location and length +- clocks : shall contain the input clock + +Optional properties : +- timeout-sec : shall contain the default watchdog timeout in seconds, + if unset, the default timeout is 30 seconds + +Example: + watchdog@208a038 { + compatible = "qcom,kpss-wdt-ipq8064"; + reg = <0x0208a038 0x40>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + };
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt index cfff375..8f3d96a 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -9,6 +9,7 @@ (a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs (b) "samsung,exynos5250-wdt" for Exynos5250 (c) "samsung,exynos5420-wdt" for Exynos5420 + (c) "samsung,exynos7-wdt" for Exynos7 - reg : base physical address of the controller and length of memory mapped region.
diff --git a/Documentation/devicetree/bindings/staging/xillybus.txt b/Documentation/devicetree/bindings/xillybus/xillybus.txt similarity index 100% rename from Documentation/devicetree/bindings/staging/xillybus.txt rename to Documentation/devicetree/bindings/xillybus/xillybus.txt
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 1f013bd..7768518 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt
@@ -51,6 +51,8 @@ VIII - Specifying device power management information (sleep property) + IX - Specifying dma bus information + Appendix A - Sample SOC node for MPC8540 @@ -1332,6 +1334,57 @@ (similar to an interrupt nexus, except that defining a standardized sleep-map should wait until its necessity is demonstrated). +IX - Specifying dma bus information + +Some devices may have DMA memory range shifted relatively to the beginning of +RAM, or even placed outside of kernel RAM. For example, the Keystone 2 SoC +worked in LPAE mode with 4G memory has: +- RAM range: [0x8 0000 0000, 0x8 FFFF FFFF] +- DMA range: [ 0x8000 0000, 0xFFFF FFFF] +and DMA range is aliased into first 2G of RAM in HW. + +In such cases, DMA addresses translation should be performed between CPU phys +and DMA addresses. The "dma-ranges" property is intended to be used +for describing the configuration of such system in DT. + +In addition, each DMA master device on the DMA bus may or may not support +coherent DMA operations. The "dma-coherent" property is intended to be used +for identifying devices supported coherent DMA operations in DT. + +* DMA Bus master +Optional property: +- dma-ranges: <prop-encoded-array> encoded as arbitrary number of triplets of + (child-bus-address, parent-bus-address, length). Each triplet specified + describes a contiguous DMA address range. + The dma-ranges property is used to describe the direct memory access (DMA) + structure of a memory-mapped bus whose device tree parent can be accessed + from DMA operations originating from the bus. It provides a means of + defining a mapping or translation between the physical address space of + the bus and the physical address space of the parent of the bus. + (for more information see ePAPR specification) + +* DMA Bus child +Optional property: +- dma-ranges: <empty> value. if present - It means that DMA addresses + translation has to be enabled for this device. +- dma-coherent: Present if dma operations are coherent + +Example: +soc { + compatible = "ti,keystone","simple-bus"; + ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + + [...] + + usb: usb@2680000 { + compatible = "ti,keystone-dwc3"; + + [...] + dma-coherent; + }; +}; + Appendix A - Sample SOC node for MPC8540 ========================================
diff --git a/Documentation/devicetree/dynamic-resolution-notes.txt b/Documentation/devicetree/dynamic-resolution-notes.txt new file mode 100644 index 0000000..083d232 --- /dev/null +++ b/Documentation/devicetree/dynamic-resolution-notes.txt
@@ -0,0 +1,25 @@ +Device Tree Dynamic Resolver Notes +---------------------------------- + +This document describes the implementation of the in-kernel +Device Tree resolver, residing in drivers/of/resolver.c and is a +companion document to Documentation/devicetree/dt-object-internal.txt[1] + +How the resolver works +---------------------- + +The resolver is given as an input an arbitrary tree compiled with the +proper dtc option and having a /plugin/ tag. This generates the +appropriate __fixups__ & __local_fixups__ nodes as described in [1]. + +In sequence the resolver works by the following steps: + +1. Get the maximum device tree phandle value from the live tree + 1. +2. Adjust all the local phandles of the tree to resolve by that amount. +3. Using the __local__fixups__ node information adjust all local references + by the same amount. +4. For each property in the __fixups__ node locate the node it references + in the live tree. This is the label used to tag the node. +5. Retrieve the phandle of the target of the fixup. +6. For each fixup in the property locate the node:property:offset location + and replace it with the phandle value.
diff --git a/Documentation/devicetree/of_selftest.txt b/Documentation/devicetree/of_selftest.txt new file mode 100644 index 0000000..1e3d5c9 --- /dev/null +++ b/Documentation/devicetree/of_selftest.txt
@@ -0,0 +1,211 @@ +Open Firmware Device Tree Selftest +---------------------------------- + +Author: Gaurav Minocha <gaurav.minocha.os@gmail.com> + +1. Introduction + +This document explains how the test data required for executing OF selftest +is attached to the live tree dynamically, independent of the machine's +architecture. + +It is recommended to read the following documents before moving ahead. + +[1] Documentation/devicetree/usage-model.txt +[2] http://www.devicetree.org/Device_Tree_Usage + +OF Selftest has been designed to test the interface (include/linux/of.h) +provided to device driver developers to fetch the device information..etc. +from the unflattened device tree data structure. This interface is used by +most of the device drivers in various use cases. + + +2. Test-data + +The Device Tree Source file (drivers/of/testcase-data/testcases.dts) contains +the test data required for executing the unit tests automated in +drivers/of/selftests.c. Currently, following Device Tree Source Include files +(.dtsi) are included in testcase.dts: + +drivers/of/testcase-data/tests-interrupts.dtsi +drivers/of/testcase-data/tests-platform.dtsi +drivers/of/testcase-data/tests-phandle.dtsi +drivers/of/testcase-data/tests-match.dtsi + +When the kernel is build with OF_SELFTEST enabled, then the following make rule + +$(obj)/%.dtb: $(src)/%.dts FORCE + $(call if_changed_dep, dtc) + +is used to compile the DT source file (testcase.dts) into a binary blob +(testcase.dtb), also referred as flattened DT. + +After that, using the following rule the binary blob above is wrapped as an +assembly file (testcase.dtb.S). + +$(obj)/%.dtb.S: $(obj)/%.dtb + $(call cmd, dt_S_dtb) + +The assembly file is compiled into an object file (testcase.dtb.o), and is +linked into the kernel image. + + +2.1. Adding the test data + +Un-flattened device tree structure: + +Un-flattened device tree consists of connected device_node(s) in form of a tree +structure described below. + +// following struct members are used to construct the tree +struct device_node { + ... + struct device_node *parent; + struct device_node *child; + struct device_node *sibling; + struct device_node *allnext; /* next in list of all nodes */ + ... + }; + +Figure 1, describes a generic structure of machine's un-flattened device tree +considering only child and sibling pointers. There exists another pointer, +*parent, that is used to traverse the tree in the reverse direction. So, at +a particular level the child node and all the sibling nodes will have a parent +pointer pointing to a common node (e.g. child1, sibling2, sibling3, sibling4's +parent points to root node) + +root ('/') + | +child1 -> sibling2 -> sibling3 -> sibling4 -> null + | | | | + | | | null + | | | + | | child31 -> sibling32 -> null + | | | | + | | null null + | | + | child21 -> sibling22 -> sibling23 -> null + | | | | + | null null null + | +child11 -> sibling12 -> sibling13 -> sibling14 -> null + | | | | + | | | null + | | | + null null child131 -> null + | + null + +Figure 1: Generic structure of un-flattened device tree + + +*allnext: it is used to link all the nodes of DT into a list. So, for the + above tree the list would be as follows: + +root->child1->child11->sibling12->sibling13->child131->sibling14->sibling2-> +child21->sibling22->sibling23->sibling3->child31->sibling32->sibling4->null + +Before executing OF selftest, it is required to attach the test data to +machine's device tree (if present). So, when selftest_data_add() is called, +at first it reads the flattened device tree data linked into the kernel image +via the following kernel symbols: + +__dtb_testcases_begin - address marking the start of test data blob +__dtb_testcases_end - address marking the end of test data blob + +Secondly, it calls of_fdt_unflatten_tree() to unflatten the flattened +blob. And finally, if the machine's device tree (i.e live tree) is present, +then it attaches the unflattened test data tree to the live tree, else it +attaches itself as a live device tree. + +attach_node_and_children() uses of_attach_node() to attach the nodes into the +live tree as explained below. To explain the same, the test data tree described + in Figure 2 is attached to the live tree described in Figure 1. + +root ('/') + | + testcase-data + | + test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null + | | | | + test-child01 null null null + + +allnext list: + +root->testcase-data->test-child0->test-child01->test-sibling1->test-sibling2 +->test-sibling3->null + +Figure 2: Example test data tree to be attached to live tree. + +According to the scenario above, the live tree is already present so it isn't +required to attach the root('/') node. All other nodes are attached by calling +of_attach_node() on each node. + +In the function of_attach_node(), the new node is attached as the child of the +given parent in live tree. But, if parent already has a child then the new node +replaces the current child and turns it into its sibling. So, when the testcase +data node is attached to the live tree above (Figure 1), the final structure is + as shown in Figure 3. + +root ('/') + | +testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null + | | | | | + (...) | | | null + | | child31 -> sibling32 -> null + | | | | + | | null null + | | + | child21 -> sibling22 -> sibling23 -> null + | | | | + | null null null + | + child11 -> sibling12 -> sibling13 -> sibling14 -> null + | | | | + null null | null + | + child131 -> null + | + null +----------------------------------------------------------------------- + +root ('/') + | +testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null + | | | | | + | (...) (...) (...) null + | +test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null + | | | | + null null null test-child01 + + +Figure 3: Live device tree structure after attaching the testcase-data. + + +Astute readers would have noticed that test-child0 node becomes the last +sibling compared to the earlier structure (Figure 2). After attaching first +test-child0 the test-sibling1 is attached that pushes the child node +(i.e. test-child0) to become a sibling and makes itself a child node, + as mentioned above. + +If a duplicate node is found (i.e. if a node with same full_name property is +already present in the live tree), then the node isn't attached rather its +properties are updated to the live tree's node by calling the function +update_node_properties(). + + +2.2. Removing the test data + +Once the test case execution is complete, selftest_data_remove is called in +order to remove the device nodes attached initially (first the leaf nodes are +detached and then moving up the parent nodes are removed, and eventually the +whole tree). selftest_data_remove() calls detach_node_and_children() that uses +of_detach_node() to detach the nodes from the live device tree. + +To detach a node, of_detach_node() first updates all_next linked list, by +attaching the previous node's allnext to current node's allnext pointer. And +then, it either updates the child pointer of given node's parent to its +sibling or attaches the previous sibling to the given node's sibling, as +appropriate. That is it :)
diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt index 573e28c..11fb87f 100644 --- a/Documentation/dmaengine.txt +++ b/Documentation/dmaengine.txt
@@ -98,7 +98,7 @@ unsigned long flags); The peripheral driver is expected to have mapped the scatterlist for - the DMA operation prior to calling device_prep_slave_sg, and must + the DMA operation prior to calling dmaengine_prep_slave_sg(), and must keep the scatterlist mapped until the DMA operation has completed. The scatterlist must be mapped using the DMA struct device. If a mapping needs to be synchronized later, dma_sync_*_for_*() must be @@ -195,5 +195,5 @@ Note: Not all DMA engine drivers can return reliable information for a running DMA channel. It is recommended that DMA engine users - pause or stop (via dmaengine_terminate_all) the channel before + pause or stop (via dmaengine_terminate_all()) the channel before using this API.
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index d14710b..b5ab416 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt
@@ -264,8 +264,10 @@ IO region devm_release_mem_region() devm_release_region() + devm_release_resource() devm_request_mem_region() devm_request_region() + devm_request_resource() IOMAP devm_ioport_map() @@ -281,7 +283,9 @@ IRQ devm_free_irq() + devm_request_any_context_irq() devm_request_irq() + devm_request_threaded_irq() MDIO devm_mdiobus_alloc() @@ -291,11 +295,14 @@ MEM devm_free_pages() devm_get_free_pages() + devm_kasprintf() devm_kcalloc() devm_kfree() devm_kmalloc() devm_kmalloc_array() devm_kmemdup() + devm_kstrdup() + devm_kvasprintf() devm_kzalloc() PCI
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 26c623d..91b43d2 100755 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware
@@ -708,23 +708,25 @@ } sub it9135 { - my $sourcefile = "dvb-usb-it9135.zip"; - my $url = "http://www.ite.com.tw/uploads/firmware/v3.6.0.0/$sourcefile"; - my $hash = "1e55f6c8833f1d0ae067c2bb2953e6a9"; - my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0); - my $outfile = "dvb-usb-it9135.fw"; + my $url = "http://www.ite.com.tw/uploads/firmware/v3.25.0.0/"; + my $file1 = "dvb-usb-it9135-01.zip"; my $fwfile1 = "dvb-usb-it9135-01.fw"; + my $hash1 = "02fcf11174eda84745dae7e61c5ff9ba"; + my $file2 = "dvb-usb-it9135-02.zip"; my $fwfile2 = "dvb-usb-it9135-02.fw"; + my $hash2 = "d5e1437dc24358578e07999475d4cac9"; checkstandard(); - wgetfile($sourcefile, $url); - unzip($sourcefile, $tmpdir); - verify("$tmpdir/$outfile", $hash); - extract("$tmpdir/$outfile", 64, 8128, "$fwfile1"); - extract("$tmpdir/$outfile", 12866, 5817, "$fwfile2"); + wgetfile($file1, $url . $file1); + unzip($file1, ""); + verify("$fwfile1", $hash1); - "$fwfile1 $fwfile2" + wgetfile($file2, $url . $file2); + unzip($file2, ""); + verify("$fwfile2", $hash2); + + "$file1 $file2" } sub tda10071 {
diff --git a/Documentation/filesystems/.gitignore b/Documentation/filesystems/.gitignore new file mode 100644 index 0000000..31d6e42 --- /dev/null +++ b/Documentation/filesystems/.gitignore
@@ -0,0 +1 @@ +dnotify_test
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index f1997e9..b30753c 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking
@@ -67,6 +67,7 @@ struct file *, unsigned open_flag, umode_t create_mode, int *opened); int (*tmpfile) (struct inode *, struct dentry *, umode_t); + int (*dentry_open)(struct dentry *, struct file *, const struct cred *); locking rules: all may block @@ -96,6 +97,7 @@ update_time: no atomic_open: yes tmpfile: no +dentry_open: no Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on victim. @@ -464,15 +466,12 @@ size_t, unsigned int); ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int); - int (*setlease)(struct file *, long, struct file_lock **); + int (*setlease)(struct file *, long, struct file_lock **, void **); long (*fallocate)(struct file *, int, loff_t, loff_t); }; locking rules: - All may block except for ->setlease. - No VFS locks held on entry except for ->setlease. - -->setlease has the file_list_lock held and must not sleep. + All may block. ->llseek() locking has moved from llseek to the individual llseek implementations. If your fs is not using generic_file_llseek, you @@ -496,6 +495,10 @@ ->read on directories probably must go away - we should just enforce -EISDIR in sys_read() and friends. +->setlease operations should call generic_setlease() before or after setting +the lease within the individual filesystem to record the result of the +operation + --------------------------- dquot_operations ------------------------------- prototypes: int (*write_dquot) (struct dquot *);
diff --git a/Documentation/filesystems/Makefile b/Documentation/filesystems/Makefile index a5dd114..13483d1 100644 --- a/Documentation/filesystems/Makefile +++ b/Documentation/filesystems/Makefile
@@ -1,5 +1,4 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o +subdir-y := configfs # List of programs to build hostprogs-y := dnotify_test
diff --git a/Documentation/filesystems/autofs4.txt b/Documentation/filesystems/autofs4.txt new file mode 100644 index 0000000..39d02e1 --- /dev/null +++ b/Documentation/filesystems/autofs4.txt
@@ -0,0 +1,520 @@ +<head> +<style> p { max-width:50em} ol, ul {max-width: 40em}</style> +</head> + +autofs - how it works +===================== + +Purpose +------- + +The goal of autofs is to provide on-demand mounting and race free +automatic unmounting of various other filesystems. This provides two +key advantages: + +1. There is no need to delay boot until all filesystems that + might be needed are mounted. Processes that try to access those + slow filesystems might be delayed but other processes can + continue freely. This is particularly important for + network filesystems (e.g. NFS) or filesystems stored on + media with a media-changing robot. + +2. The names and locations of filesystems can be stored in + a remote database and can change at any time. The content + in that data base at the time of access will be used to provide + a target for the access. The interpretation of names in the + filesystem can even be programmatic rather than database-backed, + allowing wildcards for example, and can vary based on the user who + first accessed a name. + +Context +------- + +The "autofs4" filesystem module is only one part of an autofs system. +There also needs to be a user-space program which looks up names +and mounts filesystems. This will often be the "automount" program, +though other tools including "systemd" can make use of "autofs4". +This document describes only the kernel module and the interactions +required with any user-space program. Subsequent text refers to this +as the "automount daemon" or simply "the daemon". + +"autofs4" is a Linux kernel module with provides the "autofs" +filesystem type. Several "autofs" filesystems can be mounted and they +can each be managed separately, or all managed by the same daemon. + +Content +------- + +An autofs filesystem can contain 3 sorts of objects: directories, +symbolic links and mount traps. Mount traps are directories with +extra properties as described in the next section. + +Objects can only be created by the automount daemon: symlinks are +created with a regular `symlink` system call, while directories and +mount traps are created with `mkdir`. The determination of whether a +directory should be a mount trap or not is quite _ad hoc_, largely for +historical reasons, and is determined in part by the +*direct*/*indirect*/*offset* mount options, and the *maxproto* mount option. + +If neither the *direct* or *offset* mount options are given (so the +mount is considered to be *indirect*), then the root directory is +always a regular directory, otherwise it is a mount trap when it is +empty and a regular directory when not empty. Note that *direct* and +*offset* are treated identically so a concise summary is that the root +directory is a mount trap only if the filesystem is mounted *direct* +and the root is empty. + +Directories created in the root directory are mount traps only if the +filesystem is mounted *indirect* and they are empty. + +Directories further down the tree depend on the *maxproto* mount +option and particularly whether it is less than five or not. +When *maxproto* is five, no directories further down the +tree are ever mount traps, they are always regular directories. When +the *maxproto* is four (or three), these directories are mount traps +precisely when they are empty. + +So: non-empty (i.e. non-leaf) directories are never mount traps. Empty +directories are sometimes mount traps, and sometimes not depending on +where in the tree they are (root, top level, or lower), the *maxproto*, +and whether the mount was *indirect* or not. + +Mount Traps +--------------- + +A core element of the implementation of autofs is the Mount Traps +which are provided by the Linux VFS. Any directory provided by a +filesystem can be designated as a trap. This involves two separate +features that work together to allow autofs to do its job. + +**DCACHE_NEED_AUTOMOUNT** + +If a dentry has the DCACHE_NEED_AUTOMOUNT flag set (which gets set if +the inode has S_AUTOMOUNT set, or can be set directly) then it is +(potentially) a mount trap. Any access to this directory beyond a +"`stat`" will (normally) cause the `d_op->d_automount()` dentry operation +to be called. The task of this method is to find the filesystem that +should be mounted on the directory and to return it. The VFS is +responsible for actually mounting the root of this filesystem on the +directory. + +autofs doesn't find the filesystem itself but sends a message to the +automount daemon asking it to find and mount the filesystem. The +autofs `d_automount` method then waits for the daemon to report that +everything is ready. It will then return "`NULL`" indicating that the +mount has already happened. The VFS doesn't try to mount anything but +follows down the mount that is already there. + +This functionality is sufficient for some users of mount traps such +as NFS which creates traps so that mountpoints on the server can be +reflected on the client. However it is not sufficient for autofs. As +mounting onto a directory is considered to be "beyond a `stat`", the +automount daemon would not be able to mount a filesystem on the 'trap' +directory without some way to avoid getting caught in the trap. For +that purpose there is another flag. + +**DCACHE_MANAGE_TRANSIT** + +If a dentry has DCACHE_MANAGE_TRANSIT set then two very different but +related behaviors are invoked, both using the `d_op->d_manage()` +dentry operation. + +Firstly, before checking to see if any filesystem is mounted on the +directory, d_manage() will be called with the `rcu_walk` parameter set +to `false`. It may return one of three things: + +- A return value of zero indicates that there is nothing special + about this dentry and normal checks for mounts and automounts + should proceed. + + autofs normally returns zero, but first waits for any + expiry (automatic unmounting of the mounted filesystem) to + complete. This avoids races. + +- A return value of `-EISDIR` tells the VFS to ignore any mounts + on the directory and to not consider calling `->d_automount()`. + This effectively disables the **DCACHE_NEED_AUTOMOUNT** flag + causing the directory not be a mount trap after all. + + autofs returns this if it detects that the process performing the + lookup is the automount daemon and that the mount has been + requested but has not yet completed. How it determines this is + discussed later. This allows the automount daemon not to get + caught in the mount trap. + + There is a subtlety here. It is possible that a second autofs + filesystem can be mounted below the first and for both of them to + be managed by the same daemon. For the daemon to be able to mount + something on the second it must be able to "walk" down past the + first. This means that d_manage cannot *always* return -EISDIR for + the automount daemon. It must only return it when a mount has + been requested, but has not yet completed. + + `d_manage` also returns `-EISDIR` if the dentry shouldn't be a + mount trap, either because it is a symbolic link or because it is + not empty. + +- Any other negative value is treated as an error and returned + to the caller. + + autofs can return + + - -ENOENT if the automount daemon failed to mount anything, + - -ENOMEM if it ran out of memory, + - -EINTR if a signal arrived while waiting for expiry to + complete + - or any other error sent down by the automount daemon. + + +The second use case only occurs during an "RCU-walk" and so `rcu_walk` +will be set. + +An RCU-walk is a fast and lightweight process for walking down a +filename path (i.e. it is like running on tip-toes). RCU-walk cannot +cope with all situations so when it finds a difficulty it falls back +to "REF-walk", which is slower but more robust. + +RCU-walk will never call `->d_automount`; the filesystems must already +be mounted or RCU-walk cannot handle the path. +To determine if a mount-trap is safe for RCU-walk mode it calls +`->d_manage()` with `rcu_walk` set to `true`. + +In this case `d_manage()` must avoid blocking and should avoid taking +spinlocks if at all possible. Its sole purpose is to determine if it +would be safe to follow down into any mounted directory and the only +reason that it might not be is if an expiry of the mount is +underway. + +In the `rcu_walk` case, `d_manage()` cannot return -EISDIR to tell the +VFS that this is a directory that doesn't require d_automount. If +`rcu_walk` sees a dentry with DCACHE_NEED_AUTOMOUNT set but nothing +mounted, it *will* fall back to REF-walk. `d_manage()` cannot make the +VFS remain in RCU-walk mode, but can only tell it to get out of +RCU-walk mode by returning `-ECHILD`. + +So `d_manage()`, when called with `rcu_walk` set, should either return +-ECHILD if there is any reason to believe it is unsafe to end the +mounted filesystem, and otherwise should return 0. + +autofs will return `-ECHILD` if an expiry of the filesystem has been +initiated or is being considered, otherwise it returns 0. + + +Mountpoint expiry +----------------- + +The VFS has a mechansim for automatically expiring unused mounts, +much as it can expire any unused dentry information from the dcache. +This is guided by the MNT_SHRINKABLE flag. This only applies to +mounts that were created by `d_automount()` returning a filesystem to be +mounted. As autofs doesn't return such a filesystem but leaves the +mounting to the automount daemon, it must involve the automount daemon +in unmounting as well. This also means that autofs has more control +of expiry. + +The VFS also supports "expiry" of mounts using the MNT_EXPIRE flag to +the `umount` system call. Unmounting with MNT_EXPIRE will fail unless +a previous attempt had been made, and the filesystem has been inactive +and untouched since that previous attempt. autofs4 does not depend on +this but has its own internal tracking of whether filesystems were +recently used. This allows individual names in the autofs directory +to expire separately. + +With version 4 of the protocol, the automount daemon can try to +unmount any filesystems mounted on the autofs filesystem or remove any +symbolic links or empty directories any time it likes. If the unmount +or removal is successful the filesystem will be returned to the state +it was before the mount or creation, so that any access of the name +will trigger normal auto-mount processing. In particlar, `rmdir` and +`unlink` do not leave negative entries in the dcache as a normal +filesystem would, so an attempt to access a recently-removed object is +passed to autofs for handling. + +With version 5, this is not safe except for unmounting from top-level +directories. As lower-level directories are never mount traps, other +processes will see an empty directory as soon as the filesystem is +unmounted. So it is generally safest to use the autofs expiry +protocol described below. + +Normally the daemon only wants to remove entries which haven't been +used for a while. For this purpose autofs maintains a "`last_used`" +time stamp on each directory or symlink. For symlinks it genuinely +does record the last time the symlink was "used" or followed to find +out where it points to. For directories the field is a slight +misnomer. It actually records the last time that autofs checked if +the directory or one of its descendents was busy and found that it +was. This is just as useful and doesn't require updating the field so +often. + +The daemon is able to ask autofs if anything is due to be expired, +using an `ioctl` as discussed later. For a *direct* mount, autofs +considers if the entire mount-tree can be unmounted or not. For an +*indirect* mount, autofs considers each of the names in the top level +directory to determine if any of those can be unmounted and cleaned +up. + +There is an option with indirect mounts to consider each of the leaves +that has been mounted on instead of considering the top-level names. +This is intended for compatability with version 4 of autofs and should +be considered as deprecated. + +When autofs considers a directory it checks the `last_used` time and +compares it with the "timeout" value set when the filesystem was +mounted, though this check is ignored in some cases. It also checks if +the directory or anything below it is in use. For symbolic links, +only the `last_used` time is ever considered. + +If both appear to support expiring the directory or symlink, an action +is taken. + +There are two ways to ask autofs to consider expiry. The first is to +use the **AUTOFS_IOC_EXPIRE** ioctl. This only works for indirect +mounts. If it finds something in the root directory to expire it will +return the name of that thing. Once a name has been returned the +automount daemon needs to unmount any filesystems mounted below the +name normally. As described above, this is unsafe for non-toplevel +mounts in a version-5 autofs. For this reason the current `automountd` +does not use this ioctl. + +The second mechanism uses either the **AUTOFS_DEV_IOCTL_EXPIRE_CMD** or +the **AUTOFS_IOC_EXPIRE_MULTI** ioctl. This will work for both direct and +indirect mounts. If it selects an object to expire, it will notify +the daemon using the notification mechanism described below. This +will block until the daemon acknowledges the expiry notification. +This implies that the "`EXPIRE`" ioctl must be sent from a different +thread than the one which handles notification. + +While the ioctl is blocking, the entry is marked as "expiring" and +`d_manage` will block until the daemon affirms that the unmount has +completed (together with removing any directories that might have been +necessary), or has been aborted. + +Communicating with autofs: detecting the daemon +----------------------------------------------- + +There are several forms of communication between the automount daemon +and the filesystem. As we have already seen, the daemon can create and +remove directories and symlinks using normal filesystem operations. +autofs knows whether a process requesting some operation is the daemon +or not based on its process-group id number (see getpgid(1)). + +When an autofs filesystem it mounted the pgid of the mounting +processes is recorded unless the "pgrp=" option is given, in which +case that number is recorded instead. Any request arriving from a +process in that process group is considered to come from the daemon. +If the daemon ever has to be stopped and restarted a new pgid can be +provided through an ioctl as will be described below. + +Communicating with autofs: the event pipe +----------------------------------------- + +When an autofs filesystem is mounted, the 'write' end of a pipe must +be passed using the 'fd=' mount option. autofs will write +notification messages to this pipe for the daemon to respond to. +For version 5, the format of the message is: + + struct autofs_v5_packet { + int proto_version; /* Protocol version */ + int type; /* Type of packet */ + autofs_wqt_t wait_queue_token; + __u32 dev; + __u64 ino; + __u32 uid; + __u32 gid; + __u32 pid; + __u32 tgid; + __u32 len; + char name[NAME_MAX+1]; + }; + +where the type is one of + + autofs_ptype_missing_indirect + autofs_ptype_expire_indirect + autofs_ptype_missing_direct + autofs_ptype_expire_direct + +so messages can indicate that a name is missing (something tried to +access it but it isn't there) or that it has been selected for expiry. + +The pipe will be set to "packet mode" (equivalent to passing +`O_DIRECT`) to _pipe2(2)_ so that a read from the pipe will return at +most one packet, and any unread portion of a packet will be discarded. + +The `wait_queue_token` is a unique number which can identify a +particular request to be acknowledged. When a message is sent over +the pipe the affected dentry is marked as either "active" or +"expiring" and other accesses to it block until the message is +acknowledged using one of the ioctls below and the relevant +`wait_queue_token`. + +Communicating with autofs: root directory ioctls +------------------------------------------------ + +The root directory of an autofs filesystem will respond to a number of +ioctls. The process issuing the ioctl must have the CAP_SYS_ADMIN +capability, or must be the automount daemon. + +The available ioctl commands are: + +- **AUTOFS_IOC_READY**: a notification has been handled. The argument + to the ioctl command is the "wait_queue_token" number + corresponding to the notification being acknowledged. +- **AUTOFS_IOC_FAIL**: similar to above, but indicates failure with + the error code `ENOENT`. +- **AUTOFS_IOC_CATATONIC**: Causes the autofs to enter "catatonic" + mode meaning that it stops sending notifications to the daemon. + This mode is also entered if a write to the pipe fails. +- **AUTOFS_IOC_PROTOVER**: This returns the protocol version in use. +- **AUTOFS_IOC_PROTOSUBVER**: Returns the protocol sub-version which + is really a version number for the implementation. It is + currently 2. +- **AUTOFS_IOC_SETTIMEOUT**: This passes a pointer to an unsigned + long. The value is used to set the timeout for expiry, and + the current timeout value is stored back through the pointer. +- **AUTOFS_IOC_ASKUMOUNT**: Returns, in the pointed-to `int`, 1 if + the filesystem could be unmounted. This is only a hint as + the situation could change at any instant. This call can be + use to avoid a more expensive full unmount attempt. +- **AUTOFS_IOC_EXPIRE**: as described above, this asks if there is + anything suitable to expire. A pointer to a packet: + + struct autofs_packet_expire_multi { + int proto_version; /* Protocol version */ + int type; /* Type of packet */ + autofs_wqt_t wait_queue_token; + int len; + char name[NAME_MAX+1]; + }; + + is required. This is filled in with the name of something + that can be unmounted or removed. If nothing can be expired, + `errno` is set to `EAGAIN`. Even though a `wait_queue_token` + is present in the structure, no "wait queue" is established + and no acknowledgment is needed. +- **AUTOFS_IOC_EXPIRE_MULTI**: This is similar to + **AUTOFS_IOC_EXPIRE** except that it causes notification to be + sent to the daemon, and it blocks until the daemon acknowledges. + The argument is an integer which can contain two different flags. + + **AUTOFS_EXP_IMMEDIATE** causes `last_used` time to be ignored + and objects are expired if the are not in use. + + **AUTOFS_EXP_LEAVES** will select a leaf rather than a top-level + name to expire. This is only safe when *maxproto* is 4. + +Communicating with autofs: char-device ioctls +--------------------------------------------- + +It is not always possible to open the root of an autofs filesystem, +particularly a *direct* mounted filesystem. If the automount daemon +is restarted there is no way for it to regain control of existing +mounts using any of the above communication channels. To address this +need there is a "miscellaneous" character device (major 10, minor 235) +which can be used to communicate directly with the autofs filesystem. +It requires CAP_SYS_ADMIN for access. + +The `ioctl`s that can be used on this device are described in a separate +document `autofs4-mount-control.txt`, and are summarized briefly here. +Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure: + + struct autofs_dev_ioctl { + __u32 ver_major; + __u32 ver_minor; + __u32 size; /* total size of data passed in + * including this struct */ + __s32 ioctlfd; /* automount command fd */ + + __u32 arg1; /* Command parameters */ + __u32 arg2; + + char path[0]; + }; + +For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target +filesystem is identified by the `path`. All other commands identify +the filesystem by the `ioctlfd` which is a file descriptor open on the +root, and which can be returned by **OPEN_MOUNT**. + +The `ver_major` and `ver_minor` are in/out parameters which check that +the requested version is supported, and report the maximum version +that the kernel module can support. + +Commands are: + +- **AUTOFS_DEV_IOCTL_VERSION_CMD**: does nothing, except validate and + set version numbers. +- **AUTOFS_DEV_IOCTL_OPENMOUNT_CMD**: return an open file descriptor + on the root of an autofs filesystem. The filesystem is identified + by name and device number, which is stored in `arg1`. Device + numbers for existing filesystems can be found in + `/proc/self/mountinfo`. +- **AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD**: same as `close(ioctlfd)`. +- **AUTOFS_DEV_IOCTL_SETPIPEFD_CMD**: if the filesystem is in + catatonic mode, this can provide the write end of a new pipe + in `arg1` to re-establish communication with a daemon. The + process group of the calling process is used to identify the + daemon. +- **AUTOFS_DEV_IOCTL_REQUESTER_CMD**: `path` should be a + name within the filesystem that has been auto-mounted on. + arg1 is the dev number of the underlying autofs. On successful + return, `arg1` and `arg2` will be the UID and GID of the process + which triggered that mount. + +- **AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD**: Check if path is a + mountpoint of a particular type - see separate documentation for + details. + +- **AUTOFS_DEV_IOCTL_PROTOVER_CMD**: +- **AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD**: +- **AUTOFS_DEV_IOCTL_READY_CMD**: +- **AUTOFS_DEV_IOCTL_FAIL_CMD**: +- **AUTOFS_DEV_IOCTL_CATATONIC_CMD**: +- **AUTOFS_DEV_IOCTL_TIMEOUT_CMD**: +- **AUTOFS_DEV_IOCTL_EXPIRE_CMD**: +- **AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD**: These all have the same + function as the similarly named **AUTOFS_IOC** ioctls, except + that **FAIL** can be given an explicit error number in `arg1` + instead of assuming `ENOENT`, and this **EXPIRE** command + corresponds to **AUTOFS_IOC_EXPIRE_MULTI**. + +Catatonic mode +-------------- + +As mentioned, an autofs mount can enter "catatonic" mode. This +happens if a write to the notification pipe fails, or if it is +explicitly requested by an `ioctl`. + +When entering catatonic mode, the pipe is closed and any pending +notifications are acknowledged with the error `ENOENT`. + +Once in catatonic mode attempts to access non-existing names will +result in `ENOENT` while attempts to access existing directories will +be treated in the same way as if they came from the daemon, so mount +traps will not fire. + +When the filesystem is mounted a _uid_ and _gid_ can be given which +set the ownership of directories and symbolic links. When the +filesystem is in catatonic mode, any process with a matching UID can +create directories or symlinks in the root directory, but not in other +directories. + +Catatonic mode can only be left via the +**AUTOFS_DEV_IOCTL_OPENMOUNT_CMD** ioctl on the `/dev/autofs`. + +autofs, name spaces, and shared mounts +-------------------------------------- + +With bind mounts and name spaces it is possible for an autofs +filesystem to appear at multiple places in one or more filesystem +name spaces. For this to work sensibly, the autofs filesystem should +always be mounted "shared". e.g. + +> `mount --make-shared /autofs/mount/point` + +The automount daemon is only able to mange a single mount location for +an autofs filesystem and if mounts on that are not 'shared', other +locations will not behave as expected. In particular access to those +other locations will likely result in the `ELOOP` error + +> Too many levels of symbolic links
diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index a2046a7..2cca5a2 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt
@@ -192,15 +192,22 @@ ipu_policy This parameter controls the policy of in-place updates in f2fs. There are five policies: - 0: F2FS_IPU_FORCE, 1: F2FS_IPU_SSR, - 2: F2FS_IPU_UTIL, 3: F2FS_IPU_SSR_UTIL, - 4: F2FS_IPU_DISABLE. + 0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR, + 0x04: F2FS_IPU_UTIL, 0x08: F2FS_IPU_SSR_UTIL, + 0x10: F2FS_IPU_FSYNC. min_ipu_util This parameter controls the threshold to trigger in-place-updates. The number indicates percentage of the filesystem utilization, and used by F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies. + min_fsync_blocks This parameter controls the threshold to trigger + in-place-updates when F2FS_IPU_FSYNC mode is set. + The number indicates the number of dirty pages + when fsync needs to flush on its call path. If + the number is less than this value, it triggers + in-place-updates. + max_victim_search This parameter controls the number of trials to find a victim segment when conducting SSR and cleaning operations. The default value is 4096
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index 61947fa..553f10d 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt
@@ -14,7 +14,6 @@ - The Device-Mapper driver - The Software RAID / MD driver - Limitations when using the MD driver -- ChangeLog Overview @@ -450,270 +449,3 @@ Even better is to simply use the Device-Mapper for linear raid and then you do not have this problem with odd numbers of sectors. - - -ChangeLog -========= - -2.1.30: - - Fix writev() (it kept writing the first segment over and over again - instead of moving onto subsequent segments). - - Fix crash in ntfs_mft_record_alloc() when mapping the new extent mft - record failed. -2.1.29: - - Fix a deadlock when mounting read-write. -2.1.28: - - Fix a deadlock. -2.1.27: - - Implement page migration support so the kernel can move memory used - by NTFS files and directories around for management purposes. - - Add support for writing to sparse files created with Windows XP SP2. - - Many minor improvements and bug fixes. -2.1.26: - - Implement support for sector sizes above 512 bytes (up to the maximum - supported by NTFS which is 4096 bytes). - - Enhance support for NTFS volumes which were supported by Windows but - not by Linux due to invalid attribute list attribute flags. - - A few minor updates and bug fixes. -2.1.25: - - Write support is now extended with write(2) being able to both - overwrite existing file data and to extend files. Also, if a write - to a sparse region occurs, write(2) will fill in the hole. Note, - mmap(2) based writes still do not support writing into holes or - writing beyond the initialized size. - - Write support has a new feature and that is that truncate(2) and - open(2) with O_TRUNC are now implemented thus files can be both made - smaller and larger. - - Note: Both write(2) and truncate(2)/open(2) with O_TRUNC still have - limitations in that they - - only provide limited support for highly fragmented files. - - only work on regular, i.e. uncompressed and unencrypted files. - - never create sparse files although this will change once directory - operations are implemented. - - Lots of bug fixes and enhancements across the board. -2.1.24: - - Support journals ($LogFile) which have been modified by chkdsk. This - means users can boot into Windows after we marked the volume dirty. - The Windows boot will run chkdsk and then reboot. The user can then - immediately boot into Linux rather than having to do a full Windows - boot first before rebooting into Linux and we will recognize such a - journal and empty it as it is clean by definition. - - Support journals ($LogFile) with only one restart page as well as - journals with two different restart pages. We sanity check both and - either use the only sane one or the more recent one of the two in the - case that both are valid. - - Lots of bug fixes and enhancements across the board. -2.1.23: - - Stamp the user space journal, aka transaction log, aka $UsnJrnl, if - it is present and active thus telling Windows and applications using - the transaction log that changes can have happened on the volume - which are not recorded in $UsnJrnl. - - Detect the case when Windows has been hibernated (suspended to disk) - and if this is the case do not allow (re)mounting read-write to - prevent data corruption when you boot back into the suspended - Windows session. - - Implement extension of resident files using the normal file write - code paths, i.e. most very small files can be extended to be a little - bit bigger but not by much. - - Add new mount option "disable_sparse". (See list of mount options - above for details.) - - Improve handling of ntfs volumes with errors and strange boot sectors - in particular. - - Fix various bugs including a nasty deadlock that appeared in recent - kernels (around 2.6.11-2.6.12 timeframe). -2.1.22: - - Improve handling of ntfs volumes with errors. - - Fix various bugs and race conditions. -2.1.21: - - Fix several race conditions and various other bugs. - - Many internal cleanups, code reorganization, optimizations, and mft - and index record writing code rewritten to fit in with the changes. - - Update Documentation/filesystems/ntfs.txt with instructions on how to - use the Device-Mapper driver with NTFS ftdisk/LDM raid. -2.1.20: - - Fix two stupid bugs introduced in 2.1.18 release. -2.1.19: - - Minor bugfix in handling of the default upcase table. - - Many internal cleanups and improvements. Many thanks to Linus - Torvalds and Al Viro for the help and advice with the sparse - annotations and cleanups. -2.1.18: - - Fix scheduling latencies at mount time. (Ingo Molnar) - - Fix endianness bug in a little traversed portion of the attribute - lookup code. -2.1.17: - - Fix bugs in mount time error code paths. -2.1.16: - - Implement access time updates (including mtime and ctime). - - Implement fsync(2), fdatasync(2), and msync(2) system calls. - - Enable the readv(2) and writev(2) system calls. - - Enable access via the asynchronous io (aio) API by adding support for - the aio_read(3) and aio_write(3) functions. -2.1.15: - - Invalidate quotas when (re)mounting read-write. - NOTE: This now only leave user space journalling on the side. (See - note for version 2.1.13, below.) -2.1.14: - - Fix an NFSd caused deadlock reported by several users. -2.1.13: - - Implement writing of inodes (access time updates are not implemented - yet so mounting with -o noatime,nodiratime is enforced). - - Enable writing out of resident files so you can now overwrite any - uncompressed, unencrypted, nonsparse file as long as you do not - change the file size. - - Add housekeeping of ntfs system files so that ntfsfix no longer needs - to be run after writing to an NTFS volume. - NOTE: This still leaves quota tracking and user space journalling on - the side but they should not cause data corruption. In the worst - case the charged quotas will be out of date ($Quota) and some - userspace applications might get confused due to the out of date - userspace journal ($UsnJrnl). -2.1.12: - - Fix the second fix to the decompression engine from the 2.1.9 release - and some further internals cleanups. -2.1.11: - - Driver internal cleanups. -2.1.10: - - Force read-only (re)mounting of volumes with unsupported volume - flags and various cleanups. -2.1.9: - - Fix two bugs in handling of corner cases in the decompression engine. -2.1.8: - - Read the $MFT mirror and compare it to the $MFT and if the two do not - match, force a read-only mount and do not allow read-write remounts. - - Read and parse the $LogFile journal and if it indicates that the - volume was not shutdown cleanly, force a read-only mount and do not - allow read-write remounts. If the $LogFile indicates a clean - shutdown and a read-write (re)mount is requested, empty $LogFile to - ensure that Windows cannot cause data corruption by replaying a stale - journal after Linux has written to the volume. - - Improve time handling so that the NTFS time is fully preserved when - converted to kernel time and only up to 99 nano-seconds are lost when - kernel time is converted to NTFS time. -2.1.7: - - Enable NFS exporting of mounted NTFS volumes. -2.1.6: - - Fix minor bug in handling of compressed directories that fixes the - erroneous "du" and "stat" output people reported. -2.1.5: - - Minor bug fix in attribute list attribute handling that fixes the - I/O errors on "ls" of certain fragmented files found by at least two - people running Windows XP. -2.1.4: - - Minor update allowing compilation with all gcc versions (well, the - ones the kernel can be compiled with anyway). -2.1.3: - - Major bug fixes for reading files and volumes in corner cases which - were being hit by Windows 2k/XP users. -2.1.2: - - Major bug fixes alleviating the hangs in statfs experienced by some - users. -2.1.1: - - Update handling of compressed files so people no longer get the - frequently reported warning messages about initialized_size != - data_size. -2.1.0: - - Add configuration option for developmental write support. - - Initial implementation of file overwriting. (Writes to resident files - are not written out to disk yet, so avoid writing to files smaller - than about 1kiB.) - - Intercept/abort changes in file size as they are not implemented yet. -2.0.25: - - Minor bugfixes in error code paths and small cleanups. -2.0.24: - - Small internal cleanups. - - Support for sendfile system call. (Christoph Hellwig) -2.0.23: - - Massive internal locking changes to mft record locking. Fixes - various race conditions and deadlocks. - - Fix ntfs over loopback for compressed files by adding an - optimization barrier. (gcc was screwing up otherwise ?) - Thanks go to Christoph Hellwig for pointing these two out: - - Remove now unused function fs/ntfs/malloc.h::vmalloc_nofs(). - - Fix ntfs_free() for ia64 and parisc. -2.0.22: - - Small internal cleanups. -2.0.21: - These only affect 32-bit architectures: - - Check for, and refuse to mount too large volumes (maximum is 2TiB). - - Check for, and refuse to open too large files and directories - (maximum is 16TiB). -2.0.20: - - Support non-resident directory index bitmaps. This means we now cope - with huge directories without problems. - - Fix a page leak that manifested itself in some cases when reading - directory contents. - - Internal cleanups. -2.0.19: - - Fix race condition and improvements in block i/o interface. - - Optimization when reading compressed files. -2.0.18: - - Fix race condition in reading of compressed files. -2.0.17: - - Cleanups and optimizations. -2.0.16: - - Fix stupid bug introduced in 2.0.15 in new attribute inode API. - - Big internal cleanup replacing the mftbmp access hacks by using the - new attribute inode API instead. -2.0.15: - - Bug fix in parsing of remount options. - - Internal changes implementing attribute (fake) inodes allowing all - attribute i/o to go via the page cache and to use all the normal - vfs/mm functionality. -2.0.14: - - Internal changes improving run list merging code and minor locking - change to not rely on BKL in ntfs_statfs(). -2.0.13: - - Internal changes towards using iget5_locked() in preparation for - fake inodes and small cleanups to ntfs_volume structure. -2.0.12: - - Internal cleanups in address space operations made possible by the - changes introduced in the previous release. -2.0.11: - - Internal updates and cleanups introducing the first step towards - fake inode based attribute i/o. -2.0.10: - - Microsoft says that the maximum number of inodes is 2^32 - 1. Update - the driver accordingly to only use 32-bits to store inode numbers on - 32-bit architectures. This improves the speed of the driver a little. -2.0.9: - - Change decompression engine to use a single buffer. This should not - affect performance except perhaps on the most heavy i/o on SMP - systems when accessing multiple compressed files from multiple - devices simultaneously. - - Minor updates and cleanups. -2.0.8: - - Remove now obsolete show_inodes and posix mount option(s). - - Restore show_sys_files mount option. - - Add new mount option case_sensitive, to determine if the driver - treats file names as case sensitive or not. - - Mostly drop support for short file names (for backwards compatibility - we only support accessing files via their short file name if one - exists). - - Fix dcache aliasing issues wrt short/long file names. - - Cleanups and minor fixes. -2.0.7: - - Just cleanups. -2.0.6: - - Major bugfix to make compatible with other kernel changes. This fixes - the hangs/oopses on umount. - - Locking cleanup in directory operations (remove BKL usage). -2.0.5: - - Major buffer overflow bug fix. - - Minor cleanups and updates for kernel 2.5.12. -2.0.4: - - Cleanups and updates for kernel 2.5.11. -2.0.3: - - Small bug fixes, cleanups, and performance improvements. -2.0.2: - - Use default fmask of 0177 so that files are no executable by default. - If you want owner executable files, just use fmask=0077. - - Update for kernel 2.5.9 but preserve backwards compatibility with - kernel 2.5.7. - - Minor bug fixes, cleanups, and updates. -2.0.1: - - Minor updates, primarily set the executable bit by default on files - so they can be executed. -2.0.0: - - Started ChangeLog. -
diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt new file mode 100644 index 0000000..530850a --- /dev/null +++ b/Documentation/filesystems/overlayfs.txt
@@ -0,0 +1,198 @@ +Written by: Neil Brown <neilb@suse.de> + +Overlay Filesystem +================== + +This document describes a prototype for a new approach to providing +overlay-filesystem functionality in Linux (sometimes referred to as +union-filesystems). An overlay-filesystem tries to present a +filesystem which is the result over overlaying one filesystem on top +of the other. + +The result will inevitably fail to look exactly like a normal +filesystem for various technical reasons. The expectation is that +many use cases will be able to ignore these differences. + +This approach is 'hybrid' because the objects that appear in the +filesystem do not all appear to belong to that filesystem. In many +cases an object accessed in the union will be indistinguishable +from accessing the corresponding object from the original filesystem. +This is most obvious from the 'st_dev' field returned by stat(2). + +While directories will report an st_dev from the overlay-filesystem, +all non-directory objects will report an st_dev from the lower or +upper filesystem that is providing the object. Similarly st_ino will +only be unique when combined with st_dev, and both of these can change +over the lifetime of a non-directory object. Many applications and +tools ignore these values and will not be affected. + +Upper and Lower +--------------- + +An overlay filesystem combines two filesystems - an 'upper' filesystem +and a 'lower' filesystem. When a name exists in both filesystems, the +object in the 'upper' filesystem is visible while the object in the +'lower' filesystem is either hidden or, in the case of directories, +merged with the 'upper' object. + +It would be more correct to refer to an upper and lower 'directory +tree' rather than 'filesystem' as it is quite possible for both +directory trees to be in the same filesystem and there is no +requirement that the root of a filesystem be given for either upper or +lower. + +The lower filesystem can be any filesystem supported by Linux and does +not need to be writable. The lower filesystem can even be another +overlayfs. The upper filesystem will normally be writable and if it +is it must support the creation of trusted.* extended attributes, and +must provide valid d_type in readdir responses, so NFS is not suitable. + +A read-only overlay of two read-only filesystems may use any +filesystem type. + +Directories +----------- + +Overlaying mainly involves directories. If a given name appears in both +upper and lower filesystems and refers to a non-directory in either, +then the lower object is hidden - the name refers only to the upper +object. + +Where both upper and lower objects are directories, a merged directory +is formed. + +At mount time, the two directories given as mount options "lowerdir" and +"upperdir" are combined into a merged directory: + + mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper,\ +workdir=/work /merged + +The "workdir" needs to be an empty directory on the same filesystem +as upperdir. + +Then whenever a lookup is requested in such a merged directory, the +lookup is performed in each actual directory and the combined result +is cached in the dentry belonging to the overlay filesystem. If both +actual lookups find directories, both are stored and a merged +directory is created, otherwise only one is stored: the upper if it +exists, else the lower. + +Only the lists of names from directories are merged. Other content +such as metadata and extended attributes are reported for the upper +directory only. These attributes of the lower directory are hidden. + +whiteouts and opaque directories +-------------------------------- + +In order to support rm and rmdir without changing the lower +filesystem, an overlay filesystem needs to record in the upper filesystem +that files have been removed. This is done using whiteouts and opaque +directories (non-directories are always opaque). + +A whiteout is created as a character device with 0/0 device number. +When a whiteout is found in the upper level of a merged directory, any +matching name in the lower level is ignored, and the whiteout itself +is also hidden. + +A directory is made opaque by setting the xattr "trusted.overlay.opaque" +to "y". Where the upper filesystem contains an opaque directory, any +directory in the lower filesystem with the same name is ignored. + +readdir +------- + +When a 'readdir' request is made on a merged directory, the upper and +lower directories are each read and the name lists merged in the +obvious way (upper is read first, then lower - entries that already +exist are not re-added). This merged name list is cached in the +'struct file' and so remains as long as the file is kept open. If the +directory is opened and read by two processes at the same time, they +will each have separate caches. A seekdir to the start of the +directory (offset 0) followed by a readdir will cause the cache to be +discarded and rebuilt. + +This means that changes to the merged directory do not appear while a +directory is being read. This is unlikely to be noticed by many +programs. + +seek offsets are assigned sequentially when the directories are read. +Thus if + - read part of a directory + - remember an offset, and close the directory + - re-open the directory some time later + - seek to the remembered offset + +there may be little correlation between the old and new locations in +the list of filenames, particularly if anything has changed in the +directory. + +Readdir on directories that are not merged is simply handled by the +underlying directory (upper or lower). + + +Non-directories +--------------- + +Objects that are not directories (files, symlinks, device-special +files etc.) are presented either from the upper or lower filesystem as +appropriate. When a file in the lower filesystem is accessed in a way +the requires write-access, such as opening for write access, changing +some metadata etc., the file is first copied from the lower filesystem +to the upper filesystem (copy_up). Note that creating a hard-link +also requires copy_up, though of course creation of a symlink does +not. + +The copy_up may turn out to be unnecessary, for example if the file is +opened for read-write but the data is not modified. + +The copy_up process first makes sure that the containing directory +exists in the upper filesystem - creating it and any parents as +necessary. It then creates the object with the same metadata (owner, +mode, mtime, symlink-target etc.) and then if the object is a file, the +data is copied from the lower to the upper filesystem. Finally any +extended attributes are copied up. + +Once the copy_up is complete, the overlay filesystem simply +provides direct access to the newly created file in the upper +filesystem - future operations on the file are barely noticed by the +overlay filesystem (though an operation on the name of the file such as +rename or unlink will of course be noticed and handled). + + +Non-standard behavior +--------------------- + +The copy_up operation essentially creates a new, identical file and +moves it over to the old name. The new file may be on a different +filesystem, so both st_dev and st_ino of the file may change. + +Any open files referring to this inode will access the old data and +metadata. Similarly any file locks obtained before copy_up will not +apply to the copied up file. + +On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and +fsetxattr(2) will fail with EROFS. + +If a file with multiple hard links is copied up, then this will +"break" the link. Changes will not be propagated to other names +referring to the same inode. + +Symlinks in /proc/PID/ and /proc/PID/fd which point to a non-directory +object in overlayfs will not contain valid absolute paths, only +relative paths leading up to the filesystem's root. This will be +fixed in the future. + +Some operations are not atomic, for example a crash during copy_up or +rename will leave the filesystem in an inconsistent state. This will +be addressed in the future. + +Changes to underlying filesystems +--------------------------------- + +Offline changes, when the overlay is not mounted, are allowed to either +the upper or the lower trees. + +Changes to the underlying filesystems while part of a mounted overlay +filesystem are not allowed. If the underlying filesystem is changed, +the behavior of the overlay is undefined, though it will not result in +a crash or deadlock.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 61d65cc..20bf204 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt
@@ -237,7 +237,7 @@ only called from a process context (i.e. not from an interrupt handler or bottom half). - alloc_inode: this method is called by inode_alloc() to allocate memory + alloc_inode: this method is called by alloc_inode() to allocate memory for struct inode and initialize it. If this function is not defined, a simple 'struct inode' is allocated. Normally alloc_inode will be used to allocate a larger structure which @@ -364,6 +364,7 @@ int (*atomic_open)(struct inode *, struct dentry *, struct file *, unsigned open_flag, umode_t create_mode, int *opened); int (*tmpfile) (struct inode *, struct dentry *, umode_t); + int (*dentry_open)(struct dentry *, struct file *, const struct cred *); }; Again, all methods are called without any locks being held, unless @@ -696,6 +697,12 @@ but instead uses bmap to find out where the blocks in the file are and uses those addresses directly. + dentry_open: *WARNING: probably going away soon, do not use!* This is an + alternative to f_op->open(), the difference is that this method may open + a file not necessarily originating from the same filesystem as the one + i_op->open() was called on. It may be useful for stacking filesystems + which want to allow native I/O directly on underlying files. + invalidatepage: If a page has PagePrivate set, then invalidatepage will be called when part or all of the page is to be removed @@ -826,7 +833,7 @@ int (*flock) (struct file *, int, struct file_lock *); ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, size_t, unsigned int); ssize_t (*splice_read)(struct file *, struct pipe_inode_info *, size_t, unsigned int); - int (*setlease)(struct file *, long arg, struct file_lock **); + int (*setlease)(struct file *, long arg, struct file_lock **, void **); long (*fallocate)(struct file *, int mode, loff_t offset, loff_t len); int (*show_fdinfo)(struct seq_file *m, struct file *f); }; @@ -895,8 +902,9 @@ splice_read: called by the VFS to splice data from file to a pipe. This method is used by the splice(2) system call - setlease: called by the VFS to set or release a file lock lease. - setlease has the file_lock_lock held and must not sleep. + setlease: called by the VFS to set or release a file lock lease. setlease + implementations should call generic_setlease to record or remove + the lease in the inode after setting it. fallocate: called by the VFS to preallocate blocks or punch a hole.
diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt index 18790c2..31e0b5d 100644 --- a/Documentation/gpio/driver.txt +++ b/Documentation/gpio/driver.txt
@@ -124,7 +124,8 @@ * gpiochip_set_chained_irqchip(): sets up a chained irq handler for a gpio_chip from a parent IRQ and passes the struct gpio_chip* as handler data. (Notice handler data, since the irqchip data is likely used by the - parent irqchip!) This is for the chained type of chip. + parent irqchip!) This is for the chained type of chip. This is also used + to set up a nested irqchip if NULL is passed as handler. To use the helpers please keep the following in mind: @@ -178,7 +179,8 @@ try_module_get()). A GPIO driver can use the following functions instead to request and free descriptors without being pinned to the kernel forever. - int gpiochip_request_own_desc(struct gpio_desc *desc, const char *label) + struct gpio_desc *gpiochip_request_own_desc(struct gpio_desc *desc, + const char *label) void gpiochip_free_own_desc(struct gpio_desc *desc)
diff --git a/Documentation/hid/uhid.txt b/Documentation/hid/uhid.txt index 54c8f97..c8656dd 100644 --- a/Documentation/hid/uhid.txt +++ b/Documentation/hid/uhid.txt
@@ -1,28 +1,13 @@ UHID - User-space I/O driver support for HID subsystem ======================================================== -The HID subsystem needs two kinds of drivers. In this document we call them: +UHID allows user-space to implement HID transport drivers. Please see +hid-transport.txt for an introduction into HID transport drivers. This document +relies heavily on the definitions declared there. - 1. The "HID I/O Driver" is the driver that performs raw data I/O to the - low-level device. Internally, they register an hid_ll_driver structure with - the HID core. They perform device setup, read raw data from the device and - push it into the HID subsystem and they provide a callback so the HID - subsystem can send data to the device. - - 2. The "HID Device Driver" is the driver that parses HID reports and reacts on - them. There are generic drivers like "generic-usb" and "generic-bluetooth" - which adhere to the HID specification and provide the standardizes features. - But there may be special drivers and quirks for each non-standard device out - there. Internally, they use the hid_driver structure. - -Historically, the USB stack was the first subsystem to provide an HID I/O -Driver. However, other standards like Bluetooth have adopted the HID specs and -may provide HID I/O Drivers, too. The UHID driver allows to implement HID I/O -Drivers in user-space and feed the data into the kernel HID-subsystem. - -This allows user-space to operate on the same level as USB-HID, Bluetooth-HID -and similar. It does not provide a way to write HID Device Drivers, though. Use -hidraw for this purpose. +With UHID, a user-space transport driver can create kernel hid-devices for each +device connected to the user-space controlled bus. The UHID API defines the I/O +events provided from the kernel to user-space and vice versa. There is an example user-space application in ./samples/uhid/uhid-example.c @@ -42,8 +27,9 @@ struct uhid_event { __u32 type; union { - struct uhid_create_req create; - struct uhid_data_req data; + struct uhid_create2_req create2; + struct uhid_output_req output; + struct uhid_input2_req input2; ... } u; }; @@ -54,8 +40,11 @@ only a single event can be sent per read() or write(). Pending data is ignored. If you want to handle multiple events in a single syscall, then use vectored I/O with readv()/writev(). +The "type" field defines the payload. For each type, there is a +payload-structure available in the union "u" (except for empty payloads). This +payload contains management and/or device data. -The first thing you should do is sending an UHID_CREATE event. This will +The first thing you should do is sending an UHID_CREATE2 event. This will register the device. UHID will respond with an UHID_START event. You can now start sending data to and reading data from UHID. However, unless UHID sends the UHID_OPEN event, the internally attached HID Device Driver has no user attached. @@ -69,12 +58,20 @@ You may decide to ignore UHID_OPEN/UHID_CLOSE, though. I/O is allowed even though the device may have no users. -If you want to send data to the HID subsystem, you send an HID_INPUT event with -your raw data payload. If the kernel wants to send data to the device, you will -read an UHID_OUTPUT or UHID_OUTPUT_EV event. +If you want to send data on the interrupt channel to the HID subsystem, you send +an HID_INPUT2 event with your raw data payload. If the kernel wants to send data +on the interrupt channel to the device, you will read an UHID_OUTPUT event. +Data requests on the control channel are currently limited to GET_REPORT and +SET_REPORT (no other data reports on the control channel are defined so far). +Those requests are always synchronous. That means, the kernel sends +UHID_GET_REPORT and UHID_SET_REPORT events and requires you to forward them to +the device on the control channel. Once the device responds, you must forward +the response via UHID_GET_REPORT_REPLY and UHID_SET_REPORT_REPLY to the kernel. +The kernel blocks internal driver-execution during such round-trips (times out +after a hard-coded period). If your device disconnects, you should send an UHID_DESTROY event. This will -unregister the device. You can now send UHID_CREATE again to register a new +unregister the device. You can now send UHID_CREATE2 again to register a new device. If you close() the fd, the device is automatically unregistered and destroyed internally. @@ -82,73 +79,79 @@ write() ------- write() allows you to modify the state of the device and feed input data into -the kernel. The following types are supported: UHID_CREATE, UHID_DESTROY and -UHID_INPUT. The kernel will parse the event immediately and if the event ID is +the kernel. The kernel will parse the event immediately and if the event ID is not supported, it will return -EOPNOTSUPP. If the payload is invalid, then -EINVAL is returned, otherwise, the amount of data that was read is returned and -the request was handled successfully. - - UHID_CREATE: - This creates the internal HID device. No I/O is possible until you send this - event to the kernel. The payload is of type struct uhid_create_req and - contains information about your device. You can start I/O now. +the request was handled successfully. O_NONBLOCK does not affect write() as +writes are always handled immediately in a non-blocking fashion. Future requests +might make use of O_NONBLOCK, though. UHID_CREATE2: - Same as UHID_CREATE, but the HID report descriptor data (rd_data) is an array - inside struct uhid_create2_req, instead of a pointer to a separate array. - Enables use from languages that don't support pointers, e.g. Python. + This creates the internal HID device. No I/O is possible until you send this + event to the kernel. The payload is of type struct uhid_create2_req and + contains information about your device. You can start I/O now. UHID_DESTROY: This destroys the internal HID device. No further I/O will be accepted. There may still be pending messages that you can receive with read() but no further UHID_INPUT events can be sent to the kernel. - You can create a new device by sending UHID_CREATE again. There is no need to + You can create a new device by sending UHID_CREATE2 again. There is no need to reopen the character device. - UHID_INPUT: - You must send UHID_CREATE before sending input to the kernel! This event - contains a data-payload. This is the raw data that you read from your device. - The kernel will parse the HID reports and react on it. - UHID_INPUT2: - Same as UHID_INPUT, but the data array is the last field of uhid_input2_req. - Enables userspace to write only the required bytes to kernel (ev.type + - ev.u.input2.size + the part of the data array that matters), instead of - the entire struct uhid_input2_req. + You must send UHID_CREATE2 before sending input to the kernel! This event + contains a data-payload. This is the raw data that you read from your device + on the interrupt channel. The kernel will parse the HID reports. - UHID_FEATURE_ANSWER: - If you receive a UHID_FEATURE request you must answer with this request. You - must copy the "id" field from the request into the answer. Set the "err" field - to 0 if no error occurred or to EIO if an I/O error occurred. + UHID_GET_REPORT_REPLY: + If you receive a UHID_GET_REPORT request you must answer with this request. + You must copy the "id" field from the request into the answer. Set the "err" + field to 0 if no error occurred or to EIO if an I/O error occurred. If "err" is 0 then you should fill the buffer of the answer with the results - of the feature request and set "size" correspondingly. + of the GET_REPORT request and set "size" correspondingly. + + UHID_SET_REPORT_REPLY: + This is the SET_REPORT equivalent of UHID_GET_REPORT_REPLY. Unlike GET_REPORT, + SET_REPORT never returns a data buffer, therefore, it's sufficient to set the + "id" and "err" fields correctly. read() ------ -read() will return a queued output report. These output reports can be of type -UHID_START, UHID_STOP, UHID_OPEN, UHID_CLOSE, UHID_OUTPUT or UHID_OUTPUT_EV. No -reaction is required to any of them but you should handle them according to your -needs. Only UHID_OUTPUT and UHID_OUTPUT_EV have payloads. +read() will return a queued output report. No reaction is required to any of +them but you should handle them according to your needs. UHID_START: This is sent when the HID device is started. Consider this as an answer to - UHID_CREATE. This is always the first event that is sent. + UHID_CREATE2. This is always the first event that is sent. Note that this + event might not be available immediately after write(UHID_CREATE2) returns. + Device drivers might required delayed setups. + This event contains a payload of type uhid_start_req. The "dev_flags" field + describes special behaviors of a device. The following flags are defined: + UHID_DEV_NUMBERED_FEATURE_REPORTS: + UHID_DEV_NUMBERED_OUTPUT_REPORTS: + UHID_DEV_NUMBERED_INPUT_REPORTS: + Each of these flags defines whether a given report-type uses numbered + reports. If numbered reports are used for a type, all messages from + the kernel already have the report-number as prefix. Otherwise, no + prefix is added by the kernel. + For messages sent by user-space to the kernel, you must adjust the + prefixes according to these flags. UHID_STOP: This is sent when the HID device is stopped. Consider this as an answer to UHID_DESTROY. - If the kernel HID device driver closes the device manually (that is, you - didn't send UHID_DESTROY) then you should consider this device closed and send - an UHID_DESTROY event. You may want to reregister your device, though. This is - always the last message that is sent to you unless you reopen the device with - UHID_CREATE. + If you didn't destroy your device via UHID_DESTROY, but the kernel sends an + UHID_STOP event, this should usually be ignored. It means that the kernel + reloaded/changed the device driver loaded on your HID device (or some other + maintenance actions happened). + You can usually ignored any UHID_STOP events safely. UHID_OPEN: This is sent when the HID device is opened. That is, the data that the HID device provides is read by some other process. You may ignore this event but it is useful for power-management. As long as you haven't received this event there is actually no other process that reads your data so there is no need to - send UHID_INPUT events to the kernel. + send UHID_INPUT2 events to the kernel. UHID_CLOSE: This is sent when there are no more processes which read the HID data. It is @@ -156,27 +159,29 @@ UHID_OUTPUT: This is sent if the HID device driver wants to send raw data to the I/O - device. You should read the payload and forward it to the device. The payload - is of type "struct uhid_data_req". + device on the interrupt channel. You should read the payload and forward it to + the device. The payload is of type "struct uhid_data_req". This may be received even though you haven't received UHID_OPEN, yet. - UHID_OUTPUT_EV (obsolete): - Same as UHID_OUTPUT but this contains a "struct input_event" as payload. This - is called for force-feedback, LED or similar events which are received through - an input device by the HID subsystem. You should convert this into raw reports - and send them to your device similar to events of type UHID_OUTPUT. - This is no longer sent by newer kernels. Instead, HID core converts it into a - raw output report and sends it via UHID_OUTPUT. + UHID_GET_REPORT: + This event is sent if the kernel driver wants to perform a GET_REPORT request + on the control channeld as described in the HID specs. The report-type and + report-number are available in the payload. + The kernel serializes GET_REPORT requests so there will never be two in + parallel. However, if you fail to respond with a UHID_GET_REPORT_REPLY, the + request might silently time out. + Once you read a GET_REPORT request, you shall forward it to the hid device and + remember the "id" field in the payload. Once your hid device responds to the + GET_REPORT (or if it fails), you must send a UHID_GET_REPORT_REPLY to the + kernel with the exact same "id" as in the request. If the request already + timed out, the kernel will ignore the response silently. The "id" field is + never re-used, so conflicts cannot happen. - UHID_FEATURE: - This event is sent if the kernel driver wants to perform a feature request as - described in the HID specs. The report-type and report-number are available in - the payload. - The kernel serializes feature requests so there will never be two in parallel. - However, if you fail to respond with a UHID_FEATURE_ANSWER in a time-span of 5 - seconds, then the requests will be dropped and a new one might be sent. - Therefore, the payload also contains an "id" field that identifies every - request. + UHID_SET_REPORT: + This is the SET_REPORT equivalent of UHID_GET_REPORT. On receipt, you shall + send a SET_REPORT request to your hid device. Once it replies, you must tell + the kernel about it via UHID_SET_REPORT_REPLY. + The same restrictions as for UHID_GET_REPORT apply. -Document by: - David Herrmann <dh.herrmann@googlemail.com> +---------------------------------------------------- +Written 2012, David Herrmann <dh.herrmann@gmail.com>
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp index ee6d30e..254d2f5 100644 --- a/Documentation/hwmon/k10temp +++ b/Documentation/hwmon/k10temp
@@ -11,7 +11,7 @@ Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series) * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series) -* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri" +* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo" * AMD Family 16h processors: "Kabini", "Mullins" Prefix: 'k10temp'
diff --git a/Documentation/hwmon/menf21bmc b/Documentation/hwmon/menf21bmc new file mode 100644 index 0000000..2a273a0 --- /dev/null +++ b/Documentation/hwmon/menf21bmc
@@ -0,0 +1,50 @@ +Kernel driver menf21bmc_hwmon +============================= + +Supported chips: + * MEN 14F021P00 + Prefix: 'menf21bmc_hwmon' + Adresses scanned: - + +Author: Andreas Werner <andreas.werner@men.de> + +Description +----------- + +The menf21bmc is a Board Management Controller (BMC) which provides an I2C +interface to the host to access the features implemented in the BMC. + +This driver gives access to the voltage monitoring feature of the main +voltages of the board. +The voltage sensors are connected to the ADC inputs of the BMC which is +a PIC16F917 Mikrocontroller. + +Usage Notes +----------- + +This driver is part of the MFD driver named "menf21bmc" and does +not auto-detect devices. +You will have to instantiate the MFD driver explicitly. +Please see Documentation/i2c/instantiating-devices for +details. + +Sysfs entries +------------- + +The following attributes are supported. All attributes are read only +The Limits are read once by the driver. + +in0_input +3.3V input voltage +in1_input +5.0V input voltage +in2_input +12.0V input voltage +in3_input +5V Standby input voltage +in4_input VBAT (on board battery) + +in[0-4]_min Minimum voltage limit +in[0-4]_max Maximum voltage limit + +in0_label "MON_3_3V" +in1_label "MON_5V" +in2_label "MON_12V" +in3_label "5V_STANDBY" +in4_label "VBAT"
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index e9c803e..793c83d 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801
@@ -28,6 +28,7 @@ * Intel Wildcat Point (PCH) * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) + * Intel Sunrise Point-H (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/ia64/Makefile b/Documentation/ia64/Makefile index b75db69..d493163 100644 --- a/Documentation/ia64/Makefile +++ b/Documentation/ia64/Makefile
@@ -1,6 +1,3 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - # List of programs to build hostprogs-y := aliasing-test
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 7e240a7..8136e1f 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt
@@ -313,6 +313,7 @@ 0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca> 0xB3 00 linux/mmc/ioctl.h 0xC0 00-0F linux/usb/iowarrior.h +0xCA 00-0F uapi/misc/cxl.h 0xCB 00-1F CBM serial IEC bus in development: <mailto:michael.klein@puffin.lb.shuttle.de> 0xCD 01 linux/reiserfs_fs.h
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 764f599..a311db8 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt
@@ -174,7 +174,7 @@ --- 3.3 Loadable module goals - obj-m - $(obj-m) specify object files which are built as loadable + $(obj-m) specifies object files which are built as loadable kernel modules. A module may be built from one source file or several source @@ -277,7 +277,7 @@ down in the ext2 directory. Kbuild only uses this information to decide that it needs to visit the directory, it is the Makefile in the subdirectory that - specifies what is modules and what is built-in. + specifies what is modular and what is built-in. It is good practice to use a CONFIG_ variable when assigning directory names. This allows kbuild to totally skip the directory if the @@ -403,7 +403,7 @@ echoing information to user in a rule is often a good practice but when execution "make -s" one does not expect to see any output except for warnings/errors. - To support this kbuild define $(kecho) which will echo out the + To support this kbuild defines $(kecho) which will echo out the text following $(kecho) to stdout except if "make -s" is used. Example: @@ -417,7 +417,7 @@ The kernel may be built with several different versions of $(CC), each supporting a unique set of features and options. - kbuild provide basic support to check for valid options for $(CC). + kbuild provides basic support to check for valid options for $(CC). $(CC) is usually the gcc compiler, but other alternatives are available. @@ -456,8 +456,8 @@ Note: as-instr-option uses KBUILD_AFLAGS for $(AS) options cc-option - cc-option is used to check if $(CC) supports a given option, and not - supported to use an optional second option. + cc-option is used to check if $(CC) supports a given option, and if + not supported to use an optional second option. Example: #arch/x86/Makefile @@ -557,8 +557,8 @@ false ; \ fi - In this example for a specific GCC version the build will error out explaining - to the user why it stops. + In this example for a specific GCC version the build will error out + explaining to the user why it stops. cc-cross-prefix cc-cross-prefix is used to check if there exists a $(CC) in path with @@ -656,7 +656,7 @@ In the example above the executable is composed of the C++ file qconf.cc - identified by $(qconf-cxxobjs). - If qconf is composed by a mixture of .c and .cc files, then an + If qconf is composed of a mixture of .c and .cc files, then an additional line can be used to identify this. Example: @@ -733,7 +733,7 @@ hostprogs-$(CONFIG_KALLSYMS) += kallsyms Kbuild knows about both 'y' for built-in and 'm' for module. - So if a config symbol evaluate to 'm', kbuild will still build + So if a config symbol evaluates to 'm', kbuild will still build the binary. In other words, Kbuild handles hostprogs-m exactly like hostprogs-y. But only hostprogs-y is recommended to be used when no CONFIG symbols are involved. @@ -754,8 +754,8 @@ #drivers/pci/Makefile clean-files := devlist.h classlist.h -When executing "make clean", the two files "devlist.h classlist.h" will -be deleted. Kbuild will assume files to be in same relative directory as the +When executing "make clean", the two files "devlist.h classlist.h" will be +deleted. Kbuild will assume files to be in the same relative directory as the Makefile except if an absolute path is specified (path starting with '/'). To delete a directory hierarchy use: @@ -786,7 +786,7 @@ The above assignment instructs kbuild to descend down in the directory compressed/ when "make clean" is executed. -To support the clean infrastructure in the Makefiles that builds the +To support the clean infrastructure in the Makefiles that build the final bootimage there is an optional target named archclean: Example: @@ -818,17 +818,16 @@ When kbuild executes, the following steps are followed (roughly): 1) Configuration of the kernel => produce .config 2) Store kernel version in include/linux/version.h -3) Symlink include/asm to include/asm-$(ARCH) -4) Updating all other prerequisites to the target prepare: +3) Updating all other prerequisites to the target prepare: - Additional prerequisites are specified in arch/$(ARCH)/Makefile -5) Recursively descend down in all directories listed in +4) Recursively descend down in all directories listed in init-* core* drivers-* net-* libs-* and build all targets. - The values of the above variables are expanded in arch/$(ARCH)/Makefile. -6) All object files are then linked and the resulting file vmlinux is +5) All object files are then linked and the resulting file vmlinux is located at the root of the obj tree. The very first objects linked are listed in head-y, assigned by arch/$(ARCH)/Makefile. -7) Finally, the architecture-specific part does any required post processing +6) Finally, the architecture-specific part does any required post processing and builds the final bootimage. - This includes building boot records - Preparing initrd images and the like @@ -927,7 +926,7 @@ KBUILD_AFLAGS_MODULE Options for $(AS) when building modules - $(KBUILD_AFLAGS_MODULE) is used to add arch specific options that + $(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that are used for $(AS). From commandline AFLAGS_MODULE shall be used (see kbuild.txt). @@ -938,13 +937,13 @@ KBUILD_CFLAGS_MODULE Options for $(CC) when building modules - $(KBUILD_CFLAGS_MODULE) is used to add arch specific options that + $(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that are used for $(CC). From commandline CFLAGS_MODULE shall be used (see kbuild.txt). KBUILD_LDFLAGS_MODULE Options for $(LD) when linking modules - $(KBUILD_LDFLAGS_MODULE) is used to add arch specific options + $(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options used when linking modules. This is often a linker script. From commandline LDFLAGS_MODULE shall be used (see kbuild.txt). @@ -1066,7 +1065,7 @@ extra-y - extra-y specify additional targets created in the current + extra-y specifies additional targets created in the current directory, in addition to any targets specified by obj-*. Listing all targets in extra-y is required for two purposes: @@ -1093,7 +1092,7 @@ Usage: target: source(s) FORCE - $(call if_changed,ld/objcopy/gzip) + $(call if_changed,ld/objcopy/gzip/...) When the rule is evaluated, it is checked to see if any files need an update, or the command line has changed since the last @@ -1111,7 +1110,7 @@ significant; for instance, the below will fail (note the extra space after the comma): target: source(s) FORCE - #WRONG!# $(call if_changed, ld/objcopy/gzip) + #WRONG!# $(call if_changed, ld/objcopy/gzip/...) ld Link target. Often, LDFLAGS_$@ is used to set specific options to ld. @@ -1142,8 +1141,8 @@ 2) delete target during make clean The ": %: %.o" part of the prerequisite is a shorthand that - free us from listing the setup.o and bootsect.o files. - Note: It is a common mistake to forget the "target :=" assignment, + frees us from listing the setup.o and bootsect.o files. + Note: It is a common mistake to forget the "targets :=" assignment, resulting in the target file being recompiled for no obvious reason. @@ -1164,29 +1163,6 @@ clean-files += *.dtb DTC_FLAGS ?= -p 1024 - dtc_cpp - This is just like dtc as describe above, except that the C pre- - processor is invoked upon the .dtsp file before compiling the result - with dtc. - - In order for build dependencies to work, all files compiled using - dtc_cpp must use the C pre-processor's #include functionality and not - dtc's /include/ functionality. - - Using the C pre-processor allows use of #define to create named - constants. In turn, the #defines will typically appear in a header - file, which may be shared with regular C code. Since the dtc language - represents a data structure rather than code in C syntax, similar - restrictions are placed on a header file included by a device tree - file as for a header file included by an assembly language file. - In particular, the C pre-processor is passed -x assembler-with-cpp, - which sets macro __ASSEMBLY__. __DTS__ is also set. These allow header - files to restrict their content to that compatible with device tree - source. - - A central rule exists to create $(obj)/%.dtb from $(src)/%.dtsp; - architecture Makefiles do no need to explicitly write out that rule. - --- 6.8 Custom kbuild commands When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand @@ -1237,11 +1213,11 @@ When building the *.lds target, kbuild uses the variables: KBUILD_CPPFLAGS : Set in top-level Makefile cppflags-y : May be set in the kbuild makefile - CPPFLAGS_$(@F) : Target specific flags. + CPPFLAGS_$(@F) : Target-specific flags. Note that the full filename is used in this assignment. - The kbuild infrastructure for *lds file are used in several + The kbuild infrastructure for *lds files is used in several architecture-specific files. --- 6.10 Generic header files @@ -1254,11 +1230,11 @@ === 7 Kbuild syntax for exported headers -The kernel include a set of headers that is exported to userspace. +The kernel includes a set of headers that is exported to userspace. Many headers can be exported as-is but other headers require a minimal pre-processing before they are ready for user-space. The pre-processing does: -- drop kernel specific annotations +- drop kernel-specific annotations - drop include of compiler.h - drop all sections that are kernel internal (guarded by ifdef __KERNEL__) @@ -1268,7 +1244,7 @@ --- 7.1 header-y - header-y specify header files to be exported. + header-y specifies header files to be exported. Example: #include/linux/Kbuild @@ -1278,7 +1254,7 @@ The convention is to list one file per line and preferably in alphabetic order. - header-y also specify which subdirectories to visit. + header-y also specifies which subdirectories to visit. A subdirectory is identified by a trailing '/' which can be seen in the example above for the usb subdirectory. @@ -1296,9 +1272,9 @@ --- 7.3 destination-y - When an architecture have a set of exported headers that needs to be + When an architecture has a set of exported headers that needs to be exported to a different directory destination-y is used. - destination-y specify the destination directory for all exported + destination-y specifies the destination directory for all exported headers in the file where it is present. Example: @@ -1391,9 +1367,9 @@ INSTALL_MOD_STRIP - If this variable is specified, will cause modules to be stripped + If this variable is specified, it will cause modules to be stripped after they are installed. If INSTALL_MOD_STRIP is '1', then the - default option --strip-debug will be used. Otherwise, + default option --strip-debug will be used. Otherwise, the INSTALL_MOD_STRIP value will be used as the option(s) to the strip command.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 10d51c2..4c81a86 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt
@@ -605,11 +605,15 @@ See Documentation/s390/CommonIO for details. clk_ignore_unused [CLK] - Keep all clocks already enabled by bootloader on, - even if no driver has claimed them. This is useful - for debug and development, but should not be - needed on a platform with proper driver support. - For more information, see Documentation/clk.txt. + Prevents the clock framework from automatically gating + clocks that have not been explicitly enabled by a Linux + device driver but are enabled in hardware at reset or + by the bootloader/firmware. Note that this does not + force such clocks to be always-on nor does it reserve + those clocks in any way. This parameter is useful for + debug and development, but should not be needed on a + platform with proper driver support. For more + information, see Documentation/clk.txt. clock= [BUGS=X86-32, HW] gettimeofday clocksource override. [Deprecated] @@ -656,7 +660,8 @@ Sets the size of kernel global memory area for contiguous memory allocations and optionally the placement constraint by the physical address range of - memory allocations. For more information, see + memory allocations. A value of 0 disables CMA + altogether. For more information, see include/linux/dma-contiguous.h cmo_free_hint= [PPC] Format: { yes | no } @@ -921,6 +926,12 @@ earlycon= [KNL] Output early console device and options. + cdns,<addr> + Start an early, polled-mode console on a cadence serial + port at the specified address. The cadence serial port + must already be setup and configured. Options are not + yet supported. + uart[8250],io,<addr>[,options] uart[8250],mmio,<addr>[,options] uart[8250],mmio32,<addr>[,options] @@ -936,6 +947,18 @@ must already be setup and configured. Options are not yet supported. + msm_serial,<addr> + Start an early, polled-mode console on an msm serial + port at the specified address. The serial port + must already be setup and configured. Options are not + yet supported. + + msm_serial_dm,<addr> + Start an early, polled-mode console on an msm serial + dm port at the specified address. The serial port + must already be setup and configured. Options are not + yet supported. + smh Use ARM semihosting calls for early console. earlyprintk= [X86,SH,BLACKFIN,ARM,M68k] @@ -992,10 +1015,14 @@ Format: {"off" | "on" | "skip[mbr]"} efi= [EFI] - Format: { "old_map" } + Format: { "old_map", "nochunk", "noruntime" } old_map [X86-64]: switch to the old ioremap-based EFI runtime services mapping. 32-bit still uses this one by default. + nochunk: disable reading files in "chunks" in the EFI + boot stub, as chunking can cause problems with some + firmware implementations. + noruntime : disable EFI runtime services support efi_no_storage_paranoia [EFI; X86] Using this parameter you can use more than 50% of @@ -1280,6 +1307,18 @@ .cdrom .chs .ignore_cable are additional options See Documentation/ide/ide.txt. + ide-generic.probe-mask= [HW] (E)IDE subsystem + Format: <int> + Probe mask for legacy ISA IDE ports. Depending on + platform up to 6 ports are supported, enabled by + setting corresponding bits in the mask to 1. The + default value is 0x0, which has a special meaning. + On systems that have PCI, it triggers scanning the + PCI bus for the first and the second port, which + are then probed. On systems without PCI the value + of 0x0 enables probing the two first ports as if it + was 0x3. + ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem Claim all unknown PCI IDE storage controllers. @@ -1304,7 +1343,7 @@ Set number of hash buckets for inode cache. ima_appraise= [IMA] appraise integrity measurements - Format: { "off" | "enforce" | "fix" } + Format: { "off" | "enforce" | "fix" | "log" } default: "enforce" ima_appraise_tcb [IMA] @@ -1560,6 +1599,8 @@ kmemleak= [KNL] Boot-time kmemleak enable/disable Valid arguments: on, off Default: on + Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y, + the default is off. kmemcheck= [X86] Boot-time kmemcheck enable/disable/one-shot mode Valid arguments: 0, 1, 2 @@ -1704,6 +1745,49 @@ lockd.nlm_udpport=M [NFS] Assign UDP port. Format: <integer> + locktorture.nreaders_stress= [KNL] + Set the number of locking read-acquisition kthreads. + Defaults to being automatically set based on the + number of online CPUs. + + locktorture.nwriters_stress= [KNL] + Set the number of locking write-acquisition kthreads. + + locktorture.onoff_holdoff= [KNL] + Set time (s) after boot for CPU-hotplug testing. + + locktorture.onoff_interval= [KNL] + Set time (s) between CPU-hotplug operations, or + zero to disable CPU-hotplug testing. + + locktorture.shuffle_interval= [KNL] + Set task-shuffle interval (jiffies). Shuffling + tasks allows some CPUs to go into dyntick-idle + mode during the locktorture test. + + locktorture.shutdown_secs= [KNL] + Set time (s) after boot system shutdown. This + is useful for hands-off automated testing. + + locktorture.stat_interval= [KNL] + Time (s) between statistics printk()s. + + locktorture.stutter= [KNL] + Time (s) to stutter testing, for example, + specifying five seconds causes the test to run for + five seconds, wait for five seconds, and so on. + This tests the locking primitive's ability to + transition abruptly to and from idle. + + locktorture.torture_runnable= [BOOT] + Start locktorture running at boot time. + + locktorture.torture_type= [KNL] + Specify the locking implementation to test. + + locktorture.verbose= [KNL] + Enable additional printk() statements. + logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver Format: <irq> @@ -2166,7 +2250,7 @@ nodsp [SH] Disable hardware DSP at boot time. - noefi [X86] Disable EFI runtime services support. + noefi Disable EFI runtime services support. noexec [IA-64] @@ -2881,6 +2965,24 @@ Lazy RCU callbacks are those which RCU can prove do nothing more than free memory. + rcutorture.cbflood_inter_holdoff= [KNL] + Set holdoff time (jiffies) between successive + callback-flood tests. + + rcutorture.cbflood_intra_holdoff= [KNL] + Set holdoff time (jiffies) between successive + bursts of callbacks within a given callback-flood + test. + + rcutorture.cbflood_n_burst= [KNL] + Set the number of bursts making up a given + callback-flood test. Set this to zero to + disable callback-flood testing. + + rcutorture.cbflood_n_per_burst= [KNL] + Set the number of callbacks to be registered + in a given burst of a callback-flood test. + rcutorture.fqs_duration= [KNL] Set duration of force_quiescent_state bursts. @@ -2920,7 +3022,7 @@ Set time (s) between CPU-hotplug operations, or zero to disable CPU-hotplug testing. - rcutorture.rcutorture_runnable= [BOOT] + rcutorture.torture_runnable= [BOOT] Start rcutorture running at boot time. rcutorture.shuffle_interval= [KNL] @@ -2982,6 +3084,11 @@ rcupdate.rcu_cpu_stall_timeout= [KNL] Set timeout for RCU CPU stall warning messages. + rcupdate.rcu_task_stall_timeout= [KNL] + Set timeout in jiffies for RCU task stall warning + messages. Disable with a value less than or equal + to zero. + rdinit= [KNL] Format: <full_path> Run specified binary instead of /init from the ramdisk, @@ -3140,6 +3247,13 @@ slram= [HW,MTD] + slab_nomerge [MM] + Disable merging of slabs with similar size. May be + necessary if there is some reason to distinguish + allocs to different slabs. Debug options disable + merging on their own. + For more information see Documentation/vm/slub.txt. + slab_max_order= [MM, SLAB] Determines the maximum allowed order for slabs. A high setting may cause OOMs due to memory @@ -3175,11 +3289,8 @@ For more information see Documentation/vm/slub.txt. slub_nomerge [MM, SLUB] - Disable merging of slabs with similar size. May be - necessary if there is some reason to distinguish - allocs to different slabs. Debug options disable - merging on their own. - For more information see Documentation/vm/slub.txt. + Same with slab_nomerge. This is supported for legacy. + See slab_nomerge for more information. smart2= [HW] Format: <io1>[,<io2>[,...,<io8>]] @@ -3303,11 +3414,13 @@ tdfx= [HW,DRM] - test_suspend= [SUSPEND] + test_suspend= [SUSPEND][,N] Specify "mem" (for Suspend-to-RAM) or "standby" (for - standby suspend) as the system sleep state to briefly - enter during system startup. The system is woken from - this state using a wakeup-capable RTC alarm. + standby suspend) or "freeze" (for suspend type freeze) + as the system sleep state during system startup with + the optional capability to repeat N number of times. + The system is woken from this state using a + wakeup-capable RTC alarm. thash_entries= [KNL,NET] Set number of hash buckets for TCP connection @@ -3370,6 +3483,12 @@ e.g. base its process migration decisions on it. Default is on. + topology_updates= [KNL, PPC, NUMA] + Format: {off} + Specify if the kernel should ignore (off) + topology updates sent by the hypervisor to this + LPAR. + tp720= [HW,PS2] tpm_suspend_pcr=[HW,TPM] @@ -3522,6 +3641,8 @@ READ_DISC_INFO command); e = NO_READ_CAPACITY_16 (don't use READ_CAPACITY_16 command); + f = NO_REPORT_OPCODES (don't use report opcodes + command, uas only); h = CAPACITY_HEURISTICS (decrease the reported device capacity by one sector if the number is odd); @@ -3541,6 +3662,8 @@ bogus residue values); s = SINGLE_LUN (the device has only one Logical Unit); + t = NO_ATA_1X (don't allow ATA(12) and ATA(16) + commands, uas only); u = IGNORE_UAS (don't bind to the uas driver); w = NO_WP_DETECT (don't test whether the medium is write-protected).
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt index b772418..45e777f 100644 --- a/Documentation/kmemleak.txt +++ b/Documentation/kmemleak.txt
@@ -62,6 +62,10 @@ these actions are stored in an early log buffer. The size of this buffer is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option. +If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is +disabled by default. Passing "kmemleak=on" on the kernel command +line enables the function. + Basic Algorithm --------------- @@ -122,7 +126,7 @@ Freeing kmemleak internal objects --------------------------------- -To allow access to previosuly found memory leaks after kmemleak has been +To allow access to previously found memory leaks after kmemleak has been disabled by the user or due to an fatal error, internal kmemleak objects won't be freed when kmemleak is disabled, and those objects may occupy a large part of physical memory.
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 4bbeca8..4227ec2 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt
@@ -300,6 +300,7 @@ - arm - ppc - mips +- s390 3. Configuring Kprobes
diff --git a/Documentation/laptops/.gitignore b/Documentation/laptops/.gitignore new file mode 100644 index 0000000..da2bd06 --- /dev/null +++ b/Documentation/laptops/.gitignore
@@ -0,0 +1,2 @@ +dslm +freefall
diff --git a/Documentation/laptops/Makefile b/Documentation/laptops/Makefile index 5cb144a..2b0fa5e 100644 --- a/Documentation/laptops/Makefile +++ b/Documentation/laptops/Makefile
@@ -1,8 +1,5 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - # List of programs to build -hostprogs-y := dslm +hostprogs-y := dslm freefall # Tell kbuild to always build the programs always := $(hostprogs-y)
diff --git a/Documentation/lockdep-design.txt b/Documentation/locking/lockdep-design.txt similarity index 100% rename from Documentation/lockdep-design.txt rename to Documentation/locking/lockdep-design.txt
diff --git a/Documentation/locking/lockstat.txt b/Documentation/locking/lockstat.txt new file mode 100644 index 0000000..7428773 --- /dev/null +++ b/Documentation/locking/lockstat.txt
@@ -0,0 +1,178 @@ + +LOCK STATISTICS + +- WHAT + +As the name suggests, it provides statistics on locks. + +- WHY + +Because things like lock contention can severely impact performance. + +- HOW + +Lockdep already has hooks in the lock functions and maps lock instances to +lock classes. We build on that (see Documentation/lokcing/lockdep-design.txt). +The graph below shows the relation between the lock functions and the various +hooks therein. + + __acquire + | + lock _____ + | \ + | __contended + | | + | <wait> + | _______/ + |/ + | + __acquired + | + . + <hold> + . + | + __release + | + unlock + +lock, unlock - the regular lock functions +__* - the hooks +<> - states + +With these hooks we provide the following statistics: + + con-bounces - number of lock contention that involved x-cpu data + contentions - number of lock acquisitions that had to wait + wait time min - shortest (non-0) time we ever had to wait for a lock + max - longest time we ever had to wait for a lock + total - total time we spend waiting on this lock + avg - average time spent waiting on this lock + acq-bounces - number of lock acquisitions that involved x-cpu data + acquisitions - number of times we took the lock + hold time min - shortest (non-0) time we ever held the lock + max - longest time we ever held the lock + total - total time this lock was held + avg - average time this lock was held + +These numbers are gathered per lock class, per read/write state (when +applicable). + +It also tracks 4 contention points per class. A contention point is a call site +that had to wait on lock acquisition. + + - CONFIGURATION + +Lock statistics are enabled via CONFIG_LOCK_STAT. + + - USAGE + +Enable collection of statistics: + +# echo 1 >/proc/sys/kernel/lock_stat + +Disable collection of statistics: + +# echo 0 >/proc/sys/kernel/lock_stat + +Look at the current lock statistics: + +( line numbers not part of actual output, done for clarity in the explanation + below ) + +# less /proc/lock_stat + +01 lock_stat version 0.4 +02----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- +03 class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg +04----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- +05 +06 &mm->mmap_sem-W: 46 84 0.26 939.10 16371.53 194.90 47291 2922365 0.16 2220301.69 17464026916.32 5975.99 +07 &mm->mmap_sem-R: 37 100 1.31 299502.61 325629.52 3256.30 212344 34316685 0.10 7744.91 95016910.20 2.77 +08 --------------- +09 &mm->mmap_sem 1 [<ffffffff811502a7>] khugepaged_scan_mm_slot+0x57/0x280 +19 &mm->mmap_sem 96 [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510 +11 &mm->mmap_sem 34 [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0 +12 &mm->mmap_sem 17 [<ffffffff81127e71>] vm_munmap+0x41/0x80 +13 --------------- +14 &mm->mmap_sem 1 [<ffffffff81046fda>] dup_mmap+0x2a/0x3f0 +15 &mm->mmap_sem 60 [<ffffffff81129e29>] SyS_mprotect+0xe9/0x250 +16 &mm->mmap_sem 41 [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510 +17 &mm->mmap_sem 68 [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0 +18 +19............................................................................................................................................................................................................................. +20 +21 unix_table_lock: 110 112 0.21 49.24 163.91 1.46 21094 66312 0.12 624.42 31589.81 0.48 +22 --------------- +23 unix_table_lock 45 [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0 +24 unix_table_lock 47 [<ffffffff8150b111>] unix_release_sock+0x31/0x250 +25 unix_table_lock 15 [<ffffffff8150ca37>] unix_find_other+0x117/0x230 +26 unix_table_lock 5 [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0 +27 --------------- +28 unix_table_lock 39 [<ffffffff8150b111>] unix_release_sock+0x31/0x250 +29 unix_table_lock 49 [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0 +30 unix_table_lock 20 [<ffffffff8150ca37>] unix_find_other+0x117/0x230 +31 unix_table_lock 4 [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0 + + +This excerpt shows the first two lock class statistics. Line 01 shows the +output version - each time the format changes this will be updated. Line 02-04 +show the header with column descriptions. Lines 05-18 and 20-31 show the actual +statistics. These statistics come in two parts; the actual stats separated by a +short separator (line 08, 13) from the contention points. + +The first lock (05-18) is a read/write lock, and shows two lines above the +short separator. The contention points don't match the column descriptors, +they have two: contentions and [<IP>] symbol. The second set of contention +points are the points we're contending with. + +The integer part of the time values is in us. + +Dealing with nested locks, subclasses may appear: + +32........................................................................................................................................................................................................................... +33 +34 &rq->lock: 13128 13128 0.43 190.53 103881.26 7.91 97454 3453404 0.00 401.11 13224683.11 3.82 +35 --------- +36 &rq->lock 645 [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75 +37 &rq->lock 297 [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a +38 &rq->lock 360 [<ffffffff8103c4c5>] select_task_rq_fair+0x1f0/0x74a +39 &rq->lock 428 [<ffffffff81045f98>] scheduler_tick+0x46/0x1fb +40 --------- +41 &rq->lock 77 [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75 +42 &rq->lock 174 [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a +43 &rq->lock 4715 [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54 +44 &rq->lock 893 [<ffffffff81340524>] schedule+0x157/0x7b8 +45 +46........................................................................................................................................................................................................................... +47 +48 &rq->lock/1: 1526 11488 0.33 388.73 136294.31 11.86 21461 38404 0.00 37.93 109388.53 2.84 +49 ----------- +50 &rq->lock/1 11526 [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54 +51 ----------- +52 &rq->lock/1 5645 [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54 +53 &rq->lock/1 1224 [<ffffffff81340524>] schedule+0x157/0x7b8 +54 &rq->lock/1 4336 [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54 +55 &rq->lock/1 181 [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a + +Line 48 shows statistics for the second subclass (/1) of &rq->lock class +(subclass starts from 0), since in this case, as line 50 suggests, +double_rq_lock actually acquires a nested lock of two spinlocks. + +View the top contending locks: + +# grep : /proc/lock_stat | head + clockevents_lock: 2926159 2947636 0.15 46882.81 1784540466.34 605.41 3381345 3879161 0.00 2260.97 53178395.68 13.71 + tick_broadcast_lock: 346460 346717 0.18 2257.43 39364622.71 113.54 3642919 4242696 0.00 2263.79 49173646.60 11.59 + &mapping->i_mmap_mutex: 203896 203899 3.36 645530.05 31767507988.39 155800.21 3361776 8893984 0.17 2254.15 14110121.02 1.59 + &rq->lock: 135014 136909 0.18 606.09 842160.68 6.15 1540728 10436146 0.00 728.72 17606683.41 1.69 + &(&zone->lru_lock)->rlock: 93000 94934 0.16 59.18 188253.78 1.98 1199912 3809894 0.15 391.40 3559518.81 0.93 + tasklist_lock-W: 40667 41130 0.23 1189.42 428980.51 10.43 270278 510106 0.16 653.51 3939674.91 7.72 + tasklist_lock-R: 21298 21305 0.20 1310.05 215511.12 10.12 186204 241258 0.14 1162.33 1179779.23 4.89 + rcu_node_1: 47656 49022 0.16 635.41 193616.41 3.95 844888 1865423 0.00 764.26 1656226.96 0.89 + &(&dentry->d_lockref.lock)->rlock: 39791 40179 0.15 1302.08 88851.96 2.21 2790851 12527025 0.10 1910.75 3379714.27 0.27 + rcu_node_0: 29203 30064 0.16 786.55 1555573.00 51.74 88963 244254 0.00 398.87 428872.51 1.76 + +Clear the statistics: + +# echo 0 > /proc/lock_stat
diff --git a/Documentation/locking/locktorture.txt b/Documentation/locking/locktorture.txt new file mode 100644 index 0000000..619f2bb --- /dev/null +++ b/Documentation/locking/locktorture.txt
@@ -0,0 +1,147 @@ +Kernel Lock Torture Test Operation + +CONFIG_LOCK_TORTURE_TEST + +The CONFIG LOCK_TORTURE_TEST config option provides a kernel module +that runs torture tests on core kernel locking primitives. The kernel +module, 'locktorture', may be built after the fact on the running +kernel to be tested, if desired. The tests periodically output status +messages via printk(), which can be examined via the dmesg (perhaps +grepping for "torture"). The test is started when the module is loaded, +and stops when the module is unloaded. This program is based on how RCU +is tortured, via rcutorture. + +This torture test consists of creating a number of kernel threads which +acquire the lock and hold it for specific amount of time, thus simulating +different critical region behaviors. The amount of contention on the lock +can be simulated by either enlarging this critical region hold time and/or +creating more kthreads. + + +MODULE PARAMETERS + +This module has the following parameters: + + + ** Locktorture-specific ** + +nwriters_stress Number of kernel threads that will stress exclusive lock + ownership (writers). The default value is twice the number + of online CPUs. + +nreaders_stress Number of kernel threads that will stress shared lock + ownership (readers). The default is the same amount of writer + locks. If the user did not specify nwriters_stress, then + both readers and writers be the amount of online CPUs. + +torture_type Type of lock to torture. By default, only spinlocks will + be tortured. This module can torture the following locks, + with string values as follows: + + o "lock_busted": Simulates a buggy lock implementation. + + o "spin_lock": spin_lock() and spin_unlock() pairs. + + o "spin_lock_irq": spin_lock_irq() and spin_unlock_irq() + pairs. + + o "rw_lock": read/write lock() and unlock() rwlock pairs. + + o "rw_lock_irq": read/write lock_irq() and unlock_irq() + rwlock pairs. + + o "mutex_lock": mutex_lock() and mutex_unlock() pairs. + + o "rwsem_lock": read/write down() and up() semaphore pairs. + +torture_runnable Start locktorture at boot time in the case where the + module is built into the kernel, otherwise wait for + torture_runnable to be set via sysfs before starting. + By default it will begin once the module is loaded. + + + ** Torture-framework (RCU + locking) ** + +shutdown_secs The number of seconds to run the test before terminating + the test and powering off the system. The default is + zero, which disables test termination and system shutdown. + This capability is useful for automated testing. + +onoff_interval The number of seconds between each attempt to execute a + randomly selected CPU-hotplug operation. Defaults + to zero, which disables CPU hotplugging. In + CONFIG_HOTPLUG_CPU=n kernels, locktorture will silently + refuse to do any CPU-hotplug operations regardless of + what value is specified for onoff_interval. + +onoff_holdoff The number of seconds to wait until starting CPU-hotplug + operations. This would normally only be used when + locktorture was built into the kernel and started + automatically at boot time, in which case it is useful + in order to avoid confusing boot-time code with CPUs + coming and going. This parameter is only useful if + CONFIG_HOTPLUG_CPU is enabled. + +stat_interval Number of seconds between statistics-related printk()s. + By default, locktorture will report stats every 60 seconds. + Setting the interval to zero causes the statistics to + be printed -only- when the module is unloaded, and this + is the default. + +stutter The length of time to run the test before pausing for this + same period of time. Defaults to "stutter=5", so as + to run and pause for (roughly) five-second intervals. + Specifying "stutter=0" causes the test to run continuously + without pausing, which is the old default behavior. + +shuffle_interval The number of seconds to keep the test threads affinitied + to a particular subset of the CPUs, defaults to 3 seconds. + Used in conjunction with test_no_idle_hz. + +verbose Enable verbose debugging printing, via printk(). Enabled + by default. This extra information is mostly related to + high-level errors and reports from the main 'torture' + framework. + + +STATISTICS + +Statistics are printed in the following format: + +spin_lock-torture: Writes: Total: 93746064 Max/Min: 0/0 Fail: 0 + (A) (B) (C) (D) (E) + +(A): Lock type that is being tortured -- torture_type parameter. + +(B): Number of writer lock acquisitions. If dealing with a read/write primitive + a second "Reads" statistics line is printed. + +(C): Number of times the lock was acquired. + +(D): Min and max number of times threads failed to acquire the lock. + +(E): true/false values if there were errors acquiring the lock. This should + -only- be positive if there is a bug in the locking primitive's + implementation. Otherwise a lock should never fail (i.e., spin_lock()). + Of course, the same applies for (C), above. A dummy example of this is + the "lock_busted" type. + +USAGE + +The following script may be used to torture locks: + + #!/bin/sh + + modprobe locktorture + sleep 3600 + rmmod locktorture + dmesg | grep torture: + +The output can be manually inspected for the error flag of "!!!". +One could of course create a more elaborate script that automatically +checked for such errors. The "rmmod" command forces a "SUCCESS", +"FAILURE", or "RCU_HOTPLUG" indication to be printk()ed. The first +two are self-explanatory, while the last indicates that while there +were no locking failures, CPU-hotplug problems were detected. + +Also see: Documentation/RCU/torture.txt
diff --git a/Documentation/locking/mutex-design.txt b/Documentation/locking/mutex-design.txt new file mode 100644 index 0000000..60c482d --- /dev/null +++ b/Documentation/locking/mutex-design.txt
@@ -0,0 +1,157 @@ +Generic Mutex Subsystem + +started by Ingo Molnar <mingo@redhat.com> +updated by Davidlohr Bueso <davidlohr@hp.com> + +What are mutexes? +----------------- + +In the Linux kernel, mutexes refer to a particular locking primitive +that enforces serialization on shared memory systems, and not only to +the generic term referring to 'mutual exclusion' found in academia +or similar theoretical text books. Mutexes are sleeping locks which +behave similarly to binary semaphores, and were introduced in 2006[1] +as an alternative to these. This new data structure provided a number +of advantages, including simpler interfaces, and at that time smaller +code (see Disadvantages). + +[1] http://lwn.net/Articles/164802/ + +Implementation +-------------- + +Mutexes are represented by 'struct mutex', defined in include/linux/mutex.h +and implemented in kernel/locking/mutex.c. These locks use a three +state atomic counter (->count) to represent the different possible +transitions that can occur during the lifetime of a lock: + + 1: unlocked + 0: locked, no waiters + negative: locked, with potential waiters + +In its most basic form it also includes a wait-queue and a spinlock +that serializes access to it. CONFIG_SMP systems can also include +a pointer to the lock task owner (->owner) as well as a spinner MCS +lock (->osq), both described below in (ii). + +When acquiring a mutex, there are three possible paths that can be +taken, depending on the state of the lock: + +(i) fastpath: tries to atomically acquire the lock by decrementing the + counter. If it was already taken by another task it goes to the next + possible path. This logic is architecture specific. On x86-64, the + locking fastpath is 2 instructions: + + 0000000000000e10 <mutex_lock>: + e21: f0 ff 0b lock decl (%rbx) + e24: 79 08 jns e2e <mutex_lock+0x1e> + + the unlocking fastpath is equally tight: + + 0000000000000bc0 <mutex_unlock>: + bc8: f0 ff 07 lock incl (%rdi) + bcb: 7f 0a jg bd7 <mutex_unlock+0x17> + + +(ii) midpath: aka optimistic spinning, tries to spin for acquisition + while the lock owner is running and there are no other tasks ready + to run that have higher priority (need_resched). The rationale is + that if the lock owner is running, it is likely to release the lock + soon. The mutex spinners are queued up using MCS lock so that only + one spinner can compete for the mutex. + + The MCS lock (proposed by Mellor-Crummey and Scott) is a simple spinlock + with the desirable properties of being fair and with each cpu trying + to acquire the lock spinning on a local variable. It avoids expensive + cacheline bouncing that common test-and-set spinlock implementations + incur. An MCS-like lock is specially tailored for optimistic spinning + for sleeping lock implementation. An important feature of the customized + MCS lock is that it has the extra property that spinners are able to exit + the MCS spinlock queue when they need to reschedule. This further helps + avoid situations where MCS spinners that need to reschedule would continue + waiting to spin on mutex owner, only to go directly to slowpath upon + obtaining the MCS lock. + + +(iii) slowpath: last resort, if the lock is still unable to be acquired, + the task is added to the wait-queue and sleeps until woken up by the + unlock path. Under normal circumstances it blocks as TASK_UNINTERRUPTIBLE. + +While formally kernel mutexes are sleepable locks, it is path (ii) that +makes them more practically a hybrid type. By simply not interrupting a +task and busy-waiting for a few cycles instead of immediately sleeping, +the performance of this lock has been seen to significantly improve a +number of workloads. Note that this technique is also used for rw-semaphores. + +Semantics +--------- + +The mutex subsystem checks and enforces the following rules: + + - Only one task can hold the mutex at a time. + - Only the owner can unlock the mutex. + - Multiple unlocks are not permitted. + - Recursive locking/unlocking is not permitted. + - A mutex must only be initialized via the API (see below). + - A task may not exit with a mutex held. + - Memory areas where held locks reside must not be freed. + - Held mutexes must not be reinitialized. + - Mutexes may not be used in hardware or software interrupt + contexts such as tasklets and timers. + +These semantics are fully enforced when CONFIG DEBUG_MUTEXES is enabled. +In addition, the mutex debugging code also implements a number of other +features that make lock debugging easier and faster: + + - Uses symbolic names of mutexes, whenever they are printed + in debug output. + - Point-of-acquire tracking, symbolic lookup of function names, + list of all locks held in the system, printout of them. + - Owner tracking. + - Detects self-recursing locks and prints out all relevant info. + - Detects multi-task circular deadlocks and prints out all affected + locks and tasks (and only those tasks). + + +Interfaces +---------- +Statically define the mutex: + DEFINE_MUTEX(name); + +Dynamically initialize the mutex: + mutex_init(mutex); + +Acquire the mutex, uninterruptible: + void mutex_lock(struct mutex *lock); + void mutex_lock_nested(struct mutex *lock, unsigned int subclass); + int mutex_trylock(struct mutex *lock); + +Acquire the mutex, interruptible: + int mutex_lock_interruptible_nested(struct mutex *lock, + unsigned int subclass); + int mutex_lock_interruptible(struct mutex *lock); + +Acquire the mutex, interruptible, if dec to 0: + int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock); + +Unlock the mutex: + void mutex_unlock(struct mutex *lock); + +Test if the mutex is taken: + int mutex_is_locked(struct mutex *lock); + +Disadvantages +------------- + +Unlike its original design and purpose, 'struct mutex' is larger than +most locks in the kernel. E.g: on x86-64 it is 40 bytes, almost twice +as large as 'struct semaphore' (24 bytes) and tied, along with rwsems, +for the largest lock in the kernel. Larger structure sizes mean more +CPU cache and memory footprint. + +When to use mutexes +------------------- + +Unless the strict semantics of mutexes are unsuitable and/or the critical +region prevents the lock from being shared, always prefer them to any other +locking primitive.
diff --git a/Documentation/rt-mutex-design.txt b/Documentation/locking/rt-mutex-design.txt similarity index 100% rename from Documentation/rt-mutex-design.txt rename to Documentation/locking/rt-mutex-design.txt
diff --git a/Documentation/rt-mutex.txt b/Documentation/locking/rt-mutex.txt similarity index 100% rename from Documentation/rt-mutex.txt rename to Documentation/locking/rt-mutex.txt
diff --git a/Documentation/locking/spinlocks.txt b/Documentation/locking/spinlocks.txt new file mode 100644 index 0000000..ff35e40 --- /dev/null +++ b/Documentation/locking/spinlocks.txt
@@ -0,0 +1,167 @@ +Lesson 1: Spin locks + +The most basic primitive for locking is spinlock. + +static DEFINE_SPINLOCK(xxx_lock); + + unsigned long flags; + + spin_lock_irqsave(&xxx_lock, flags); + ... critical section here .. + spin_unlock_irqrestore(&xxx_lock, flags); + +The above is always safe. It will disable interrupts _locally_, but the +spinlock itself will guarantee the global lock, so it will guarantee that +there is only one thread-of-control within the region(s) protected by that +lock. This works well even under UP also, so the code does _not_ need to +worry about UP vs SMP issues: the spinlocks work correctly under both. + + NOTE! Implications of spin_locks for memory are further described in: + + Documentation/memory-barriers.txt + (5) LOCK operations. + (6) UNLOCK operations. + +The above is usually pretty simple (you usually need and want only one +spinlock for most things - using more than one spinlock can make things a +lot more complex and even slower and is usually worth it only for +sequences that you _know_ need to be split up: avoid it at all cost if you +aren't sure). + +This is really the only really hard part about spinlocks: once you start +using spinlocks they tend to expand to areas you might not have noticed +before, because you have to make sure the spinlocks correctly protect the +shared data structures _everywhere_ they are used. The spinlocks are most +easily added to places that are completely independent of other code (for +example, internal driver data structures that nobody else ever touches). + + NOTE! The spin-lock is safe only when you _also_ use the lock itself + to do locking across CPU's, which implies that EVERYTHING that + touches a shared variable has to agree about the spinlock they want + to use. + +---- + +Lesson 2: reader-writer spinlocks. + +If your data accesses have a very natural pattern where you usually tend +to mostly read from the shared variables, the reader-writer locks +(rw_lock) versions of the spinlocks are sometimes useful. They allow multiple +readers to be in the same critical region at once, but if somebody wants +to change the variables it has to get an exclusive write lock. + + NOTE! reader-writer locks require more atomic memory operations than + simple spinlocks. Unless the reader critical section is long, you + are better off just using spinlocks. + +The routines look the same as above: + + rwlock_t xxx_lock = __RW_LOCK_UNLOCKED(xxx_lock); + + unsigned long flags; + + read_lock_irqsave(&xxx_lock, flags); + .. critical section that only reads the info ... + read_unlock_irqrestore(&xxx_lock, flags); + + write_lock_irqsave(&xxx_lock, flags); + .. read and write exclusive access to the info ... + write_unlock_irqrestore(&xxx_lock, flags); + +The above kind of lock may be useful for complex data structures like +linked lists, especially searching for entries without changing the list +itself. The read lock allows many concurrent readers. Anything that +_changes_ the list will have to get the write lock. + + NOTE! RCU is better for list traversal, but requires careful + attention to design detail (see Documentation/RCU/listRCU.txt). + +Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_ +time need to do any changes (even if you don't do it every time), you have +to get the write-lock at the very beginning. + + NOTE! We are working hard to remove reader-writer spinlocks in most + cases, so please don't add a new one without consensus. (Instead, see + Documentation/RCU/rcu.txt for complete information.) + +---- + +Lesson 3: spinlocks revisited. + +The single spin-lock primitives above are by no means the only ones. They +are the most safe ones, and the ones that work under all circumstances, +but partly _because_ they are safe they are also fairly slow. They are slower +than they'd need to be, because they do have to disable interrupts +(which is just a single instruction on a x86, but it's an expensive one - +and on other architectures it can be worse). + +If you have a case where you have to protect a data structure across +several CPU's and you want to use spinlocks you can potentially use +cheaper versions of the spinlocks. IFF you know that the spinlocks are +never used in interrupt handlers, you can use the non-irq versions: + + spin_lock(&lock); + ... + spin_unlock(&lock); + +(and the equivalent read-write versions too, of course). The spinlock will +guarantee the same kind of exclusive access, and it will be much faster. +This is useful if you know that the data in question is only ever +manipulated from a "process context", ie no interrupts involved. + +The reasons you mustn't use these versions if you have interrupts that +play with the spinlock is that you can get deadlocks: + + spin_lock(&lock); + ... + <- interrupt comes in: + spin_lock(&lock); + +where an interrupt tries to lock an already locked variable. This is ok if +the other interrupt happens on another CPU, but it is _not_ ok if the +interrupt happens on the same CPU that already holds the lock, because the +lock will obviously never be released (because the interrupt is waiting +for the lock, and the lock-holder is interrupted by the interrupt and will +not continue until the interrupt has been processed). + +(This is also the reason why the irq-versions of the spinlocks only need +to disable the _local_ interrupts - it's ok to use spinlocks in interrupts +on other CPU's, because an interrupt on another CPU doesn't interrupt the +CPU that holds the lock, so the lock-holder can continue and eventually +releases the lock). + +Note that you can be clever with read-write locks and interrupts. For +example, if you know that the interrupt only ever gets a read-lock, then +you can use a non-irq version of read locks everywhere - because they +don't block on each other (and thus there is no dead-lock wrt interrupts. +But when you do the write-lock, you have to use the irq-safe version. + +For an example of being clever with rw-locks, see the "waitqueue_lock" +handling in kernel/sched/core.c - nothing ever _changes_ a wait-queue from +within an interrupt, they only read the queue in order to know whom to +wake up. So read-locks are safe (which is good: they are very common +indeed), while write-locks need to protect themselves against interrupts. + + Linus + +---- + +Reference information: + +For dynamic initialization, use spin_lock_init() or rwlock_init() as +appropriate: + + spinlock_t xxx_lock; + rwlock_t xxx_rw_lock; + + static int __init xxx_init(void) + { + spin_lock_init(&xxx_lock); + rwlock_init(&xxx_rw_lock); + ... + } + + module_init(xxx_init); + +For static initialization, use DEFINE_SPINLOCK() / DEFINE_RWLOCK() or +__SPIN_LOCK_UNLOCKED() / __RW_LOCK_UNLOCKED() as appropriate.
diff --git a/Documentation/ww-mutex-design.txt b/Documentation/locking/ww-mutex-design.txt similarity index 100% rename from Documentation/ww-mutex-design.txt rename to Documentation/locking/ww-mutex-design.txt
diff --git a/Documentation/lockstat.txt b/Documentation/lockstat.txt deleted file mode 100644 index 72d0106..0000000 --- a/Documentation/lockstat.txt +++ /dev/null
@@ -1,178 +0,0 @@ - -LOCK STATISTICS - -- WHAT - -As the name suggests, it provides statistics on locks. - -- WHY - -Because things like lock contention can severely impact performance. - -- HOW - -Lockdep already has hooks in the lock functions and maps lock instances to -lock classes. We build on that (see Documentation/lockdep-design.txt). -The graph below shows the relation between the lock functions and the various -hooks therein. - - __acquire - | - lock _____ - | \ - | __contended - | | - | <wait> - | _______/ - |/ - | - __acquired - | - . - <hold> - . - | - __release - | - unlock - -lock, unlock - the regular lock functions -__* - the hooks -<> - states - -With these hooks we provide the following statistics: - - con-bounces - number of lock contention that involved x-cpu data - contentions - number of lock acquisitions that had to wait - wait time min - shortest (non-0) time we ever had to wait for a lock - max - longest time we ever had to wait for a lock - total - total time we spend waiting on this lock - avg - average time spent waiting on this lock - acq-bounces - number of lock acquisitions that involved x-cpu data - acquisitions - number of times we took the lock - hold time min - shortest (non-0) time we ever held the lock - max - longest time we ever held the lock - total - total time this lock was held - avg - average time this lock was held - -These numbers are gathered per lock class, per read/write state (when -applicable). - -It also tracks 4 contention points per class. A contention point is a call site -that had to wait on lock acquisition. - - - CONFIGURATION - -Lock statistics are enabled via CONFIG_LOCK_STAT. - - - USAGE - -Enable collection of statistics: - -# echo 1 >/proc/sys/kernel/lock_stat - -Disable collection of statistics: - -# echo 0 >/proc/sys/kernel/lock_stat - -Look at the current lock statistics: - -( line numbers not part of actual output, done for clarity in the explanation - below ) - -# less /proc/lock_stat - -01 lock_stat version 0.4 -02----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -03 class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg -04----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -05 -06 &mm->mmap_sem-W: 46 84 0.26 939.10 16371.53 194.90 47291 2922365 0.16 2220301.69 17464026916.32 5975.99 -07 &mm->mmap_sem-R: 37 100 1.31 299502.61 325629.52 3256.30 212344 34316685 0.10 7744.91 95016910.20 2.77 -08 --------------- -09 &mm->mmap_sem 1 [<ffffffff811502a7>] khugepaged_scan_mm_slot+0x57/0x280 -19 &mm->mmap_sem 96 [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510 -11 &mm->mmap_sem 34 [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0 -12 &mm->mmap_sem 17 [<ffffffff81127e71>] vm_munmap+0x41/0x80 -13 --------------- -14 &mm->mmap_sem 1 [<ffffffff81046fda>] dup_mmap+0x2a/0x3f0 -15 &mm->mmap_sem 60 [<ffffffff81129e29>] SyS_mprotect+0xe9/0x250 -16 &mm->mmap_sem 41 [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510 -17 &mm->mmap_sem 68 [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0 -18 -19............................................................................................................................................................................................................................. -20 -21 unix_table_lock: 110 112 0.21 49.24 163.91 1.46 21094 66312 0.12 624.42 31589.81 0.48 -22 --------------- -23 unix_table_lock 45 [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0 -24 unix_table_lock 47 [<ffffffff8150b111>] unix_release_sock+0x31/0x250 -25 unix_table_lock 15 [<ffffffff8150ca37>] unix_find_other+0x117/0x230 -26 unix_table_lock 5 [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0 -27 --------------- -28 unix_table_lock 39 [<ffffffff8150b111>] unix_release_sock+0x31/0x250 -29 unix_table_lock 49 [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0 -30 unix_table_lock 20 [<ffffffff8150ca37>] unix_find_other+0x117/0x230 -31 unix_table_lock 4 [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0 - - -This excerpt shows the first two lock class statistics. Line 01 shows the -output version - each time the format changes this will be updated. Line 02-04 -show the header with column descriptions. Lines 05-18 and 20-31 show the actual -statistics. These statistics come in two parts; the actual stats separated by a -short separator (line 08, 13) from the contention points. - -The first lock (05-18) is a read/write lock, and shows two lines above the -short separator. The contention points don't match the column descriptors, -they have two: contentions and [<IP>] symbol. The second set of contention -points are the points we're contending with. - -The integer part of the time values is in us. - -Dealing with nested locks, subclasses may appear: - -32........................................................................................................................................................................................................................... -33 -34 &rq->lock: 13128 13128 0.43 190.53 103881.26 7.91 97454 3453404 0.00 401.11 13224683.11 3.82 -35 --------- -36 &rq->lock 645 [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75 -37 &rq->lock 297 [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a -38 &rq->lock 360 [<ffffffff8103c4c5>] select_task_rq_fair+0x1f0/0x74a -39 &rq->lock 428 [<ffffffff81045f98>] scheduler_tick+0x46/0x1fb -40 --------- -41 &rq->lock 77 [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75 -42 &rq->lock 174 [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a -43 &rq->lock 4715 [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54 -44 &rq->lock 893 [<ffffffff81340524>] schedule+0x157/0x7b8 -45 -46........................................................................................................................................................................................................................... -47 -48 &rq->lock/1: 1526 11488 0.33 388.73 136294.31 11.86 21461 38404 0.00 37.93 109388.53 2.84 -49 ----------- -50 &rq->lock/1 11526 [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54 -51 ----------- -52 &rq->lock/1 5645 [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54 -53 &rq->lock/1 1224 [<ffffffff81340524>] schedule+0x157/0x7b8 -54 &rq->lock/1 4336 [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54 -55 &rq->lock/1 181 [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a - -Line 48 shows statistics for the second subclass (/1) of &rq->lock class -(subclass starts from 0), since in this case, as line 50 suggests, -double_rq_lock actually acquires a nested lock of two spinlocks. - -View the top contending locks: - -# grep : /proc/lock_stat | head - clockevents_lock: 2926159 2947636 0.15 46882.81 1784540466.34 605.41 3381345 3879161 0.00 2260.97 53178395.68 13.71 - tick_broadcast_lock: 346460 346717 0.18 2257.43 39364622.71 113.54 3642919 4242696 0.00 2263.79 49173646.60 11.59 - &mapping->i_mmap_mutex: 203896 203899 3.36 645530.05 31767507988.39 155800.21 3361776 8893984 0.17 2254.15 14110121.02 1.59 - &rq->lock: 135014 136909 0.18 606.09 842160.68 6.15 1540728 10436146 0.00 728.72 17606683.41 1.69 - &(&zone->lru_lock)->rlock: 93000 94934 0.16 59.18 188253.78 1.98 1199912 3809894 0.15 391.40 3559518.81 0.93 - tasklist_lock-W: 40667 41130 0.23 1189.42 428980.51 10.43 270278 510106 0.16 653.51 3939674.91 7.72 - tasklist_lock-R: 21298 21305 0.20 1310.05 215511.12 10.12 186204 241258 0.14 1162.33 1179779.23 4.89 - rcu_node_1: 47656 49022 0.16 635.41 193616.41 3.95 844888 1865423 0.00 764.26 1656226.96 0.89 - &(&dentry->d_lockref.lock)->rlock: 39791 40179 0.15 1302.08 88851.96 2.21 2790851 12527025 0.10 1910.75 3379714.27 0.27 - rcu_node_0: 29203 30064 0.16 786.55 1555573.00 51.74 88963 244254 0.00 398.87 428872.51 1.76 - -Clear the statistics: - -# echo 0 > /proc/lock_stat
diff --git a/Documentation/lockup-watchdogs.txt b/Documentation/lockup-watchdogs.txt index d2a3660..ab0baa6 100644 --- a/Documentation/lockup-watchdogs.txt +++ b/Documentation/lockup-watchdogs.txt
@@ -12,7 +12,7 @@ will stay locked up. Alternatively, the kernel can be configured to panic; a sysctl, "kernel.softlockup_panic", a kernel parameter, "softlockup_panic" (see "Documentation/kernel-parameters.txt" for -details), and a compile option, "BOOTPARAM_HARDLOCKUP_PANIC", are +details), and a compile option, "BOOTPARAM_SOFTLOCKUP_PANIC", are provided for this. A 'hardlockup' is defined as a bug that causes the CPU to loop in
diff --git a/Documentation/lzo.txt b/Documentation/lzo.txt new file mode 100644 index 0000000..ea45dd3 --- /dev/null +++ b/Documentation/lzo.txt
@@ -0,0 +1,164 @@ + +LZO stream format as understood by Linux's LZO decompressor +=========================================================== + +Introduction + + This is not a specification. No specification seems to be publicly available + for the LZO stream format. This document describes what input format the LZO + decompressor as implemented in the Linux kernel understands. The file subject + of this analysis is lib/lzo/lzo1x_decompress_safe.c. No analysis was made on + the compressor nor on any other implementations though it seems likely that + the format matches the standard one. The purpose of this document is to + better understand what the code does in order to propose more efficient fixes + for future bug reports. + +Description + + The stream is composed of a series of instructions, operands, and data. The + instructions consist in a few bits representing an opcode, and bits forming + the operands for the instruction, whose size and position depend on the + opcode and on the number of literals copied by previous instruction. The + operands are used to indicate : + + - a distance when copying data from the dictionary (past output buffer) + - a length (number of bytes to copy from dictionary) + - the number of literals to copy, which is retained in variable "state" + as a piece of information for next instructions. + + Optionally depending on the opcode and operands, extra data may follow. These + extra data can be a complement for the operand (eg: a length or a distance + encoded on larger values), or a literal to be copied to the output buffer. + + The first byte of the block follows a different encoding from other bytes, it + seems to be optimized for literal use only, since there is no dictionary yet + prior to that byte. + + Lengths are always encoded on a variable size starting with a small number + of bits in the operand. If the number of bits isn't enough to represent the + length, up to 255 may be added in increments by consuming more bytes with a + rate of at most 255 per extra byte (thus the compression ratio cannot exceed + around 255:1). The variable length encoding using #bits is always the same : + + length = byte & ((1 << #bits) - 1) + if (!length) { + length = ((1 << #bits) - 1) + length += 255*(number of zero bytes) + length += first-non-zero-byte + } + length += constant (generally 2 or 3) + + For references to the dictionary, distances are relative to the output + pointer. Distances are encoded using very few bits belonging to certain + ranges, resulting in multiple copy instructions using different encodings. + Certain encodings involve one extra byte, others involve two extra bytes + forming a little-endian 16-bit quantity (marked LE16 below). + + After any instruction except the large literal copy, 0, 1, 2 or 3 literals + are copied before starting the next instruction. The number of literals that + were copied may change the meaning and behaviour of the next instruction. In + practice, only one instruction needs to know whether 0, less than 4, or more + literals were copied. This is the information stored in the <state> variable + in this implementation. This number of immediate literals to be copied is + generally encoded in the last two bits of the instruction but may also be + taken from the last two bits of an extra operand (eg: distance). + + End of stream is declared when a block copy of distance 0 is seen. Only one + instruction may encode this distance (0001HLLL), it takes one LE16 operand + for the distance, thus requiring 3 bytes. + + IMPORTANT NOTE : in the code some length checks are missing because certain + instructions are called under the assumption that a certain number of bytes + follow because it has already been garanteed before parsing the instructions. + They just have to "refill" this credit if they consume extra bytes. This is + an implementation design choice independant on the algorithm or encoding. + +Byte sequences + + First byte encoding : + + 0..17 : follow regular instruction encoding, see below. It is worth + noting that codes 16 and 17 will represent a block copy from + the dictionary which is empty, and that they will always be + invalid at this place. + + 18..21 : copy 0..3 literals + state = (byte - 17) = 0..3 [ copy <state> literals ] + skip byte + + 22..255 : copy literal string + length = (byte - 17) = 4..238 + state = 4 [ don't copy extra literals ] + skip byte + + Instruction encoding : + + 0 0 0 0 X X X X (0..15) + Depends on the number of literals copied by the last instruction. + If last instruction did not copy any literal (state == 0), this + encoding will be a copy of 4 or more literal, and must be interpreted + like this : + + 0 0 0 0 L L L L (0..15) : copy long literal string + length = 3 + (L ?: 15 + (zero_bytes * 255) + non_zero_byte) + state = 4 (no extra literals are copied) + + If last instruction used to copy between 1 to 3 literals (encoded in + the instruction's opcode or distance), the instruction is a copy of a + 2-byte block from the dictionary within a 1kB distance. It is worth + noting that this instruction provides little savings since it uses 2 + bytes to encode a copy of 2 other bytes but it encodes the number of + following literals for free. It must be interpreted like this : + + 0 0 0 0 D D S S (0..15) : copy 2 bytes from <= 1kB distance + length = 2 + state = S (copy S literals after this block) + Always followed by exactly one byte : H H H H H H H H + distance = (H << 2) + D + 1 + + If last instruction used to copy 4 or more literals (as detected by + state == 4), the instruction becomes a copy of a 3-byte block from the + dictionary from a 2..3kB distance, and must be interpreted like this : + + 0 0 0 0 D D S S (0..15) : copy 3 bytes from 2..3 kB distance + length = 3 + state = S (copy S literals after this block) + Always followed by exactly one byte : H H H H H H H H + distance = (H << 2) + D + 2049 + + 0 0 0 1 H L L L (16..31) + Copy of a block within 16..48kB distance (preferably less than 10B) + length = 2 + (L ?: 7 + (zero_bytes * 255) + non_zero_byte) + Always followed by exactly one LE16 : D D D D D D D D : D D D D D D S S + distance = 16384 + (H << 14) + D + state = S (copy S literals after this block) + End of stream is reached if distance == 16384 + + 0 0 1 L L L L L (32..63) + Copy of small block within 16kB distance (preferably less than 34B) + length = 2 + (L ?: 31 + (zero_bytes * 255) + non_zero_byte) + Always followed by exactly one LE16 : D D D D D D D D : D D D D D D S S + distance = D + 1 + state = S (copy S literals after this block) + + 0 1 L D D D S S (64..127) + Copy 3-4 bytes from block within 2kB distance + state = S (copy S literals after this block) + length = 3 + L + Always followed by exactly one byte : H H H H H H H H + distance = (H << 3) + D + 1 + + 1 L L D D D S S (128..255) + Copy 5-8 bytes from block within 2kB distance + state = S (copy S literals after this block) + length = 5 + L + Always followed by exactly one byte : H H H H H H H H + distance = (H << 3) + D + 1 + +Authors + + This document was written by Willy Tarreau <w@1wt.eu> on 2014/07/19 during an + analysis of the decompression code available in Linux 3.16-rc5. The code is + tricky, it is possible that this document contains mistakes or that a few + corner cases were overlooked. In any case, please report any doubt, fix, or + proposed updates to the author(s) so that the document can be updated.
diff --git a/Documentation/mailbox.txt b/Documentation/mailbox.txt new file mode 100644 index 0000000..60f43ff --- /dev/null +++ b/Documentation/mailbox.txt
@@ -0,0 +1,122 @@ + The Common Mailbox Framework + Jassi Brar <jaswinder.singh@linaro.org> + + This document aims to help developers write client and controller +drivers for the API. But before we start, let us note that the +client (especially) and controller drivers are likely going to be +very platform specific because the remote firmware is likely to be +proprietary and implement non-standard protocol. So even if two +platforms employ, say, PL320 controller, the client drivers can't +be shared across them. Even the PL320 driver might need to accommodate +some platform specific quirks. So the API is meant mainly to avoid +similar copies of code written for each platform. Having said that, +nothing prevents the remote f/w to also be Linux based and use the +same api there. However none of that helps us locally because we only +ever deal at client's protocol level. + Some of the choices made during implementation are the result of this +peculiarity of this "common" framework. + + + + Part 1 - Controller Driver (See include/linux/mailbox_controller.h) + + Allocate mbox_controller and the array of mbox_chan. +Populate mbox_chan_ops, except peek_data() all are mandatory. +The controller driver might know a message has been consumed +by the remote by getting an IRQ or polling some hardware flag +or it can never know (the client knows by way of the protocol). +The method in order of preference is IRQ -> Poll -> None, which +the controller driver should set via 'txdone_irq' or 'txdone_poll' +or neither. + + + Part 2 - Client Driver (See include/linux/mailbox_client.h) + + The client might want to operate in blocking mode (synchronously +send a message through before returning) or non-blocking/async mode (submit +a message and a callback function to the API and return immediately). + + +struct demo_client { + struct mbox_client cl; + struct mbox_chan *mbox; + struct completion c; + bool async; + /* ... */ +}; + +/* + * This is the handler for data received from remote. The behaviour is purely + * dependent upon the protocol. This is just an example. + */ +static void message_from_remote(struct mbox_client *cl, void *mssg) +{ + struct demo_client *dc = container_of(mbox_client, + struct demo_client, cl); + if (dc->aysnc) { + if (is_an_ack(mssg)) { + /* An ACK to our last sample sent */ + return; /* Or do something else here */ + } else { /* A new message from remote */ + queue_req(mssg); + } + } else { + /* Remote f/w sends only ACK packets on this channel */ + return; + } +} + +static void sample_sent(struct mbox_client *cl, void *mssg, int r) +{ + struct demo_client *dc = container_of(mbox_client, + struct demo_client, cl); + complete(&dc->c); +} + +static void client_demo(struct platform_device *pdev) +{ + struct demo_client *dc_sync, *dc_async; + /* The controller already knows async_pkt and sync_pkt */ + struct async_pkt ap; + struct sync_pkt sp; + + dc_sync = kzalloc(sizeof(*dc_sync), GFP_KERNEL); + dc_async = kzalloc(sizeof(*dc_async), GFP_KERNEL); + + /* Populate non-blocking mode client */ + dc_async->cl.dev = &pdev->dev; + dc_async->cl.rx_callback = message_from_remote; + dc_async->cl.tx_done = sample_sent; + dc_async->cl.tx_block = false; + dc_async->cl.tx_tout = 0; /* doesn't matter here */ + dc_async->cl.knows_txdone = false; /* depending upon protocol */ + dc_async->async = true; + init_completion(&dc_async->c); + + /* Populate blocking mode client */ + dc_sync->cl.dev = &pdev->dev; + dc_sync->cl.rx_callback = message_from_remote; + dc_sync->cl.tx_done = NULL; /* operate in blocking mode */ + dc_sync->cl.tx_block = true; + dc_sync->cl.tx_tout = 500; /* by half a second */ + dc_sync->cl.knows_txdone = false; /* depending upon protocol */ + dc_sync->async = false; + + /* ASync mailbox is listed second in 'mboxes' property */ + dc_async->mbox = mbox_request_channel(&dc_async->cl, 1); + /* Populate data packet */ + /* ap.xxx = 123; etc */ + /* Send async message to remote */ + mbox_send_message(dc_async->mbox, &ap); + + /* Sync mailbox is listed first in 'mboxes' property */ + dc_sync->mbox = mbox_request_channel(&dc_sync->cl, 0); + /* Populate data packet */ + /* sp.abc = 123; etc */ + /* Send message to remote in blocking mode */ + mbox_send_message(dc_sync->mbox, &sp); + /* At this point 'sp' has been sent */ + + /* Now wait for async chan to be done */ + wait_for_completion(&dc_async->c); +}
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index a4de88f..22a969c 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt
@@ -574,30 +574,14 @@ in the following example: q = ACCESS_ONCE(a); - if (ACCESS_ONCE(q)) { + if (q) { ACCESS_ONCE(b) = p; } -Please note that ACCESS_ONCE() is not optional! Without the ACCESS_ONCE(), -the compiler is within its rights to transform this example: - - q = a; - if (q) { - b = p; /* BUG: Compiler can reorder!!! */ - do_something(); - } else { - b = p; /* BUG: Compiler can reorder!!! */ - do_something_else(); - } - -into this, which of course defeats the ordering: - - b = p; - q = a; - if (q) - do_something(); - else - do_something_else(); +Please note that ACCESS_ONCE() is not optional! Without the +ACCESS_ONCE(), might combine the load from 'a' with other loads from +'a', and the store to 'b' with other stores to 'b', with possible highly +counterintuitive effects on ordering. Worse yet, if the compiler is able to prove (say) that the value of variable 'a' is always non-zero, it would be well within its rights @@ -605,11 +589,12 @@ as follows: q = a; - b = p; /* BUG: Compiler can reorder!!! */ - do_something(); + b = p; /* BUG: Compiler and CPU can both reorder!!! */ -The solution is again ACCESS_ONCE() and barrier(), which preserves the -ordering between the load from variable 'a' and the store to variable 'b': +So don't leave out the ACCESS_ONCE(). + +It is tempting to try to enforce ordering on identical stores on both +branches of the "if" statement as follows: q = ACCESS_ONCE(a); if (q) { @@ -622,18 +607,11 @@ do_something_else(); } -The initial ACCESS_ONCE() is required to prevent the compiler from -proving the value of 'a', and the pair of barrier() invocations are -required to prevent the compiler from pulling the two identical stores -to 'b' out from the legs of the "if" statement. - -It is important to note that control dependencies absolutely require a -a conditional. For example, the following "optimized" version of -the above example breaks ordering, which is why the barrier() invocations -are absolutely required if you have identical stores in both legs of -the "if" statement: +Unfortunately, current compilers will transform this as follows at high +optimization levels: q = ACCESS_ONCE(a); + barrier(); ACCESS_ONCE(b) = p; /* BUG: No ordering vs. load from a!!! */ if (q) { /* ACCESS_ONCE(b) = p; -- moved up, BUG!!! */ @@ -643,21 +621,36 @@ do_something_else(); } -It is of course legal for the prior load to be part of the conditional, -for example, as follows: +Now there is no conditional between the load from 'a' and the store to +'b', which means that the CPU is within its rights to reorder them: +The conditional is absolutely required, and must be present in the +assembly code even after all compiler optimizations have been applied. +Therefore, if you need ordering in this example, you need explicit +memory barriers, for example, smp_store_release(): - if (ACCESS_ONCE(a) > 0) { - barrier(); - ACCESS_ONCE(b) = q / 2; + q = ACCESS_ONCE(a); + if (q) { + smp_store_release(&b, p); do_something(); } else { - barrier(); - ACCESS_ONCE(b) = q / 3; + smp_store_release(&b, p); do_something_else(); } -This will again ensure that the load from variable 'a' is ordered before the -stores to variable 'b'. +In contrast, without explicit memory barriers, two-legged-if control +ordering is guaranteed only when the stores differ, for example: + + q = ACCESS_ONCE(a); + if (q) { + ACCESS_ONCE(b) = p; + do_something(); + } else { + ACCESS_ONCE(b) = r; + do_something_else(); + } + +The initial ACCESS_ONCE() is still required to prevent the compiler from +proving the value of 'a'. In addition, you need to be careful what you do with the local variable 'q', otherwise the compiler might be able to guess the value and again remove @@ -665,12 +658,10 @@ q = ACCESS_ONCE(a); if (q % MAX) { - barrier(); ACCESS_ONCE(b) = p; do_something(); } else { - barrier(); - ACCESS_ONCE(b) = p; + ACCESS_ONCE(b) = r; do_something_else(); } @@ -682,9 +673,12 @@ ACCESS_ONCE(b) = p; do_something_else(); -This transformation loses the ordering between the load from variable 'a' -and the store to variable 'b'. If you are relying on this ordering, you -should do something like the following: +Given this transformation, the CPU is not required to respect the ordering +between the load from variable 'a' and the store to variable 'b'. It is +tempting to add a barrier(), but this does not help. The conditional +is gone, and the barrier won't bring it back. Therefore, if you are +relying on this ordering, you should make sure that MAX is greater than +one, perhaps as follows: q = ACCESS_ONCE(a); BUILD_BUG_ON(MAX <= 1); /* Order load from a with store to b. */ @@ -692,35 +686,45 @@ ACCESS_ONCE(b) = p; do_something(); } else { - ACCESS_ONCE(b) = p; + ACCESS_ONCE(b) = r; do_something_else(); } +Please note once again that the stores to 'b' differ. If they were +identical, as noted earlier, the compiler could pull this store outside +of the 'if' statement. + Finally, control dependencies do -not- provide transitivity. This is -demonstrated by two related examples: +demonstrated by two related examples, with the initial values of +x and y both being zero: CPU 0 CPU 1 ===================== ===================== r1 = ACCESS_ONCE(x); r2 = ACCESS_ONCE(y); - if (r1 >= 0) if (r2 >= 0) + if (r1 > 0) if (r2 > 0) ACCESS_ONCE(y) = 1; ACCESS_ONCE(x) = 1; assert(!(r1 == 1 && r2 == 1)); The above two-CPU example will never trigger the assert(). However, if control dependencies guaranteed transitivity (which they do not), -then adding the following two CPUs would guarantee a related assertion: +then adding the following CPU would guarantee a related assertion: - CPU 2 CPU 3 - ===================== ===================== - ACCESS_ONCE(x) = 2; ACCESS_ONCE(y) = 2; + CPU 2 + ===================== + ACCESS_ONCE(x) = 2; - assert(!(r1 == 2 && r2 == 2 && x == 1 && y == 1)); /* FAILS!!! */ + assert(!(r1 == 2 && r2 == 1 && x == 2)); /* FAILS!!! */ -But because control dependencies do -not- provide transitivity, the -above assertion can fail after the combined four-CPU example completes. -If you need the four-CPU example to provide ordering, you will need -smp_mb() between the loads and stores in the CPU 0 and CPU 1 code fragments. +But because control dependencies do -not- provide transitivity, the above +assertion can fail after the combined three-CPU example completes. If you +need the three-CPU example to provide ordering, you will need smp_mb() +between the loads and stores in the CPU 0 and CPU 1 code fragments, +that is, just before or just after the "if" statements. + +These two examples are the LB and WWC litmus tests from this paper: +http://www.cl.cam.ac.uk/users/pes20/ppc-supplemental/test6.pdf and this +site: https://www.cl.cam.ac.uk/~pes20/ppcmem/index.html. In summary:
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt index 45134dc..ea03abf 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/memory-hotplug.txt
@@ -155,6 +155,7 @@ /sys/devices/system/memory/memoryXXX/phys_device /sys/devices/system/memory/memoryXXX/state /sys/devices/system/memory/memoryXXX/removable +/sys/devices/system/memory/memoryXXX/valid_zones 'phys_index' : read-only and contains memory block id, same as XXX. 'state' : read-write @@ -170,6 +171,15 @@ block is removable and a value of 0 indicates that it is not removable. A memory block is removable only if every section in the block is removable. +'valid_zones' : read-only: designed to show which zones this memory block + can be onlined to. + The first column shows it's default zone. + "memory6/valid_zones: Normal Movable" shows this memoryblock + can be onlined to ZONE_NORMAL by default and to ZONE_MOVABLE + by online_movable. + "memory7/valid_zones: Movable Normal" shows this memoryblock + can be onlined to ZONE_MOVABLE by default and to ZONE_NORMAL + by online_kernel. NOTE: These directories/files appear after physical memory hotplug phase. @@ -408,7 +418,6 @@ - allowing memory hot-add to ZONE_MOVABLE. maybe we need some switch like sysctl or new control file. - showing memory block and physical device relationship. - - showing memory block is under ZONE_MOVABLE or not - test and make it better memory offlining. - support HugeTLB page migration and offlining. - memmap removing at memory offline.
diff --git a/Documentation/mic/Makefile b/Documentation/mic/Makefile new file mode 100644 index 0000000..a191d45 --- /dev/null +++ b/Documentation/mic/Makefile
@@ -0,0 +1 @@ +subdir-y := mpssd
diff --git a/Documentation/mic/mpssd/Makefile b/Documentation/mic/mpssd/Makefile index eb860a7..0f31568 100644 --- a/Documentation/mic/mpssd/Makefile +++ b/Documentation/mic/mpssd/Makefile
@@ -1,19 +1,19 @@ -# -# Makefile - Intel MIC User Space Tools. -# Copyright(c) 2013, Intel Corporation. -# +# List of programs to build +hostprogs-y := mpssd + +mpssd-objs := mpssd.o sysfs.o + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS += -I$(objtree)/usr/include -I$(srctree)/tools/include + ifdef DEBUG -CFLAGS += $(USERWARNFLAGS) -I. -g -Wall -DDEBUG=$(DEBUG) -else -CFLAGS += $(USERWARNFLAGS) -I. -g -Wall +HOSTCFLAGS += -DDEBUG=$(DEBUG) endif -mpssd: mpssd.o sysfs.o - $(CC) $(CFLAGS) -o $@ $^ -lpthread +HOSTLOADLIBES_mpssd := -lpthread install: install mpssd /usr/sbin/mpssd install micctrl /usr/sbin/micctrl - -clean: - rm -f mpssd *.o
diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 4d17487..3c5c379 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c
@@ -41,6 +41,7 @@ #include "mpssd.h" #include <linux/mic_ioctl.h> #include <linux/mic_common.h> +#include <tools/endian.h> static void init_mic(struct mic_info *mic); @@ -1476,9 +1477,9 @@ len = snprintf(buffer, PATH_MAX, "clocksource=tsc highres=off nohz=off "); - len += snprintf(buffer + len, PATH_MAX, + len += snprintf(buffer + len, PATH_MAX - len, "cpufreq_on;corec6_off;pc3_off;pc6_off "); - len += snprintf(buffer + len, PATH_MAX, + len += snprintf(buffer + len, PATH_MAX - len, "ifcfg=static;address,172.31.%d.1;netmask,255.255.255.0", mic->id);
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README index cc887ec..52844a5 100644 --- a/Documentation/mips/AU1xxx_IDE.README +++ b/Documentation/mips/AU1xxx_IDE.README
@@ -2,7 +2,7 @@ ABOUT ----- -This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the +This file describes the 'drivers/ide/au1xxx-ide.c', related files and the services they provide. If you are short in patience and just want to know how to add your hard disc to
diff --git a/Documentation/misc-devices/Makefile b/Documentation/misc-devices/Makefile new file mode 100644 index 0000000..e2b7aa4 --- /dev/null +++ b/Documentation/misc-devices/Makefile
@@ -0,0 +1 @@ +subdir-y := mei
diff --git a/Documentation/misc-devices/mei/Makefile b/Documentation/misc-devices/mei/Makefile index 00e8c3e..d758047 100644 --- a/Documentation/misc-devices/mei/Makefile +++ b/Documentation/misc-devices/mei/Makefile
@@ -1,6 +1,3 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - # List of programs to build hostprogs-y := mei-amt-version HOSTCFLAGS_mei-amt-version.o += -I$(objtree)/usr/include
diff --git a/Documentation/mutex-design.txt b/Documentation/mutex-design.txt deleted file mode 100644 index ee231ed..0000000 --- a/Documentation/mutex-design.txt +++ /dev/null
@@ -1,157 +0,0 @@ -Generic Mutex Subsystem - -started by Ingo Molnar <mingo@redhat.com> -updated by Davidlohr Bueso <davidlohr@hp.com> - -What are mutexes? ------------------ - -In the Linux kernel, mutexes refer to a particular locking primitive -that enforces serialization on shared memory systems, and not only to -the generic term referring to 'mutual exclusion' found in academia -or similar theoretical text books. Mutexes are sleeping locks which -behave similarly to binary semaphores, and were introduced in 2006[1] -as an alternative to these. This new data structure provided a number -of advantages, including simpler interfaces, and at that time smaller -code (see Disadvantages). - -[1] http://lwn.net/Articles/164802/ - -Implementation --------------- - -Mutexes are represented by 'struct mutex', defined in include/linux/mutex.h -and implemented in kernel/locking/mutex.c. These locks use a three -state atomic counter (->count) to represent the different possible -transitions that can occur during the lifetime of a lock: - - 1: unlocked - 0: locked, no waiters - negative: locked, with potential waiters - -In its most basic form it also includes a wait-queue and a spinlock -that serializes access to it. CONFIG_SMP systems can also include -a pointer to the lock task owner (->owner) as well as a spinner MCS -lock (->osq), both described below in (ii). - -When acquiring a mutex, there are three possible paths that can be -taken, depending on the state of the lock: - -(i) fastpath: tries to atomically acquire the lock by decrementing the - counter. If it was already taken by another task it goes to the next - possible path. This logic is architecture specific. On x86-64, the - locking fastpath is 2 instructions: - - 0000000000000e10 <mutex_lock>: - e21: f0 ff 0b lock decl (%rbx) - e24: 79 08 jns e2e <mutex_lock+0x1e> - - the unlocking fastpath is equally tight: - - 0000000000000bc0 <mutex_unlock>: - bc8: f0 ff 07 lock incl (%rdi) - bcb: 7f 0a jg bd7 <mutex_unlock+0x17> - - -(ii) midpath: aka optimistic spinning, tries to spin for acquisition - while the lock owner is running and there are no other tasks ready - to run that have higher priority (need_resched). The rationale is - that if the lock owner is running, it is likely to release the lock - soon. The mutex spinners are queued up using MCS lock so that only - one spinner can compete for the mutex. - - The MCS lock (proposed by Mellor-Crummey and Scott) is a simple spinlock - with the desirable properties of being fair and with each cpu trying - to acquire the lock spinning on a local variable. It avoids expensive - cacheline bouncing that common test-and-set spinlock implementations - incur. An MCS-like lock is specially tailored for optimistic spinning - for sleeping lock implementation. An important feature of the customized - MCS lock is that it has the extra property that spinners are able to exit - the MCS spinlock queue when they need to reschedule. This further helps - avoid situations where MCS spinners that need to reschedule would continue - waiting to spin on mutex owner, only to go directly to slowpath upon - obtaining the MCS lock. - - -(iii) slowpath: last resort, if the lock is still unable to be acquired, - the task is added to the wait-queue and sleeps until woken up by the - unlock path. Under normal circumstances it blocks as TASK_UNINTERRUPTIBLE. - -While formally kernel mutexes are sleepable locks, it is path (ii) that -makes them more practically a hybrid type. By simply not interrupting a -task and busy-waiting for a few cycles instead of immediately sleeping, -the performance of this lock has been seen to significantly improve a -number of workloads. Note that this technique is also used for rw-semaphores. - -Semantics ---------- - -The mutex subsystem checks and enforces the following rules: - - - Only one task can hold the mutex at a time. - - Only the owner can unlock the mutex. - - Multiple unlocks are not permitted. - - Recursive locking/unlocking is not permitted. - - A mutex must only be initialized via the API (see below). - - A task may not exit with a mutex held. - - Memory areas where held locks reside must not be freed. - - Held mutexes must not be reinitialized. - - Mutexes may not be used in hardware or software interrupt - contexts such as tasklets and timers. - -These semantics are fully enforced when CONFIG DEBUG_MUTEXES is enabled. -In addition, the mutex debugging code also implements a number of other -features that make lock debugging easier and faster: - - - Uses symbolic names of mutexes, whenever they are printed - in debug output. - - Point-of-acquire tracking, symbolic lookup of function names, - list of all locks held in the system, printout of them. - - Owner tracking. - - Detects self-recursing locks and prints out all relevant info. - - Detects multi-task circular deadlocks and prints out all affected - locks and tasks (and only those tasks). - - -Interfaces ----------- -Statically define the mutex: - DEFINE_MUTEX(name); - -Dynamically initialize the mutex: - mutex_init(mutex); - -Acquire the mutex, uninterruptible: - void mutex_lock(struct mutex *lock); - void mutex_lock_nested(struct mutex *lock, unsigned int subclass); - int mutex_trylock(struct mutex *lock); - -Acquire the mutex, interruptible: - int mutex_lock_interruptible_nested(struct mutex *lock, - unsigned int subclass); - int mutex_lock_interruptible(struct mutex *lock); - -Acquire the mutex, interruptible, if dec to 0: - int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock); - -Unlock the mutex: - void mutex_unlock(struct mutex *lock); - -Test if the mutex is taken: - int mutex_is_locked(struct mutex *lock); - -Disadvantages -------------- - -Unlike its original design and purpose, 'struct mutex' is larger than -most locks in the kernel. E.g: on x86-64 it is 40 bytes, almost twice -as large as 'struct semaphore' (24 bytes) and 8 bytes shy of the -'struct rw_semaphore' variant. Larger structure sizes mean more CPU -cache and memory footprint. - -When to use mutexes -------------------- - -Unless the strict semantics of mutexes are unsuitable and/or the critical -region prevents the lock from being shared, always prefer them to any other -locking primitive.
diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile index 0aa1ac9..4c5d7c4 100644 --- a/Documentation/networking/Makefile +++ b/Documentation/networking/Makefile
@@ -1,7 +1 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - -# Tell kbuild to always build the programs -always := $(hostprogs-y) - -obj-m := timestamping/ +subdir-y := timestamping
diff --git a/Documentation/networking/dctcp.txt b/Documentation/networking/dctcp.txt new file mode 100644 index 0000000..0d5dfbc --- /dev/null +++ b/Documentation/networking/dctcp.txt
@@ -0,0 +1,43 @@ +DCTCP (DataCenter TCP) +---------------------- + +DCTCP is an enhancement to the TCP congestion control algorithm for data +center networks and leverages Explicit Congestion Notification (ECN) in +the data center network to provide multi-bit feedback to the end hosts. + +To enable it on end hosts: + + sysctl -w net.ipv4.tcp_congestion_control=dctcp + +All switches in the data center network running DCTCP must support ECN +marking and be configured for marking when reaching defined switch buffer +thresholds. The default ECN marking threshold heuristic for DCTCP on +switches is 20 packets (30KB) at 1Gbps, and 65 packets (~100KB) at 10Gbps, +but might need further careful tweaking. + +For more details, see below documents: + +Paper: + +The algorithm is further described in detail in the following two +SIGCOMM/SIGMETRICS papers: + + i) Mohammad Alizadeh, Albert Greenberg, David A. Maltz, Jitendra Padhye, + Parveen Patel, Balaji Prabhakar, Sudipta Sengupta, and Murari Sridharan: + "Data Center TCP (DCTCP)", Data Center Networks session + Proc. ACM SIGCOMM, New Delhi, 2010. + http://simula.stanford.edu/~alizade/Site/DCTCP_files/dctcp-final.pdf + http://www.sigcomm.org/ccr/papers/2010/October/1851275.1851192 + +ii) Mohammad Alizadeh, Adel Javanmard, and Balaji Prabhakar: + "Analysis of DCTCP: Stability, Convergence, and Fairness" + Proc. ACM SIGMETRICS, San Jose, 2011. + http://simula.stanford.edu/~alizade/Site/DCTCP_files/dctcp_analysis-full.pdf + +IETF informational draft: + + http://tools.ietf.org/html/draft-bensley-tcpm-dctcp-00 + +DCTCP site: + + http://simula.stanford.edu/~alizade/Site/DCTCP.html
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index c48a970..58d08f8 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt
@@ -462,9 +462,9 @@ ------------ The Linux kernel has a built-in BPF JIT compiler for x86_64, SPARC, PowerPC, -ARM and s390 and can be enabled through CONFIG_BPF_JIT. The JIT compiler is -transparently invoked for each attached filter from user space or for internal -kernel users if it has been previously enabled by root: +ARM, ARM64, MIPS and s390 and can be enabled through CONFIG_BPF_JIT. The JIT +compiler is transparently invoked for each attached filter from user space +or for internal kernel users if it has been previously enabled by root: echo 1 > /proc/sys/net/core/bpf_jit_enable @@ -700,11 +700,11 @@ bpf_exit If f2 is JITed and the pointer stored to '_f2'. The calls f1 -> f2 -> f3 and - returns will be seamless. Without JIT, __sk_run_filter() interpreter needs to + returns will be seamless. Without JIT, __bpf_prog_run() interpreter needs to be used to call into f2. For practical reasons all eBPF programs have only one argument 'ctx' which is - already placed into R1 (e.g. on __sk_run_filter() startup) and the programs + already placed into R1 (e.g. on __bpf_prog_run() startup) and the programs can call kernel functions with up to 5 arguments. Calls with 6 or more arguments are currently not supported, but these restrictions can be lifted if necessary in the future. @@ -951,7 +951,7 @@ Mode modifier is one of: - BPF_IMM 0x00 /* classic BPF only, reserved in eBPF */ + BPF_IMM 0x00 /* used for 32-bit mov in classic BPF and 64-bit in eBPF */ BPF_ABS 0x20 BPF_IND 0x40 BPF_MEM 0x60 @@ -995,6 +995,275 @@ Where size is one of: BPF_B or BPF_H or BPF_W or BPF_DW. Note that 1 and 2 byte atomic increments are not supported. +eBPF has one 16-byte instruction: BPF_LD | BPF_DW | BPF_IMM which consists +of two consecutive 'struct bpf_insn' 8-byte blocks and interpreted as single +instruction that loads 64-bit immediate value into a dst_reg. +Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads +32-bit immediate value into a register. + +eBPF verifier +------------- +The safety of the eBPF program is determined in two steps. + +First step does DAG check to disallow loops and other CFG validation. +In particular it will detect programs that have unreachable instructions. +(though classic BPF checker allows them) + +Second step starts from the first insn and descends all possible paths. +It simulates execution of every insn and observes the state change of +registers and stack. + +At the start of the program the register R1 contains a pointer to context +and has type PTR_TO_CTX. +If verifier sees an insn that does R2=R1, then R2 has now type +PTR_TO_CTX as well and can be used on the right hand side of expression. +If R1=PTR_TO_CTX and insn is R2=R1+R1, then R2=UNKNOWN_VALUE, +since addition of two valid pointers makes invalid pointer. +(In 'secure' mode verifier will reject any type of pointer arithmetic to make +sure that kernel addresses don't leak to unprivileged users) + +If register was never written to, it's not readable: + bpf_mov R0 = R2 + bpf_exit +will be rejected, since R2 is unreadable at the start of the program. + +After kernel function call, R1-R5 are reset to unreadable and +R0 has a return type of the function. + +Since R6-R9 are callee saved, their state is preserved across the call. + bpf_mov R6 = 1 + bpf_call foo + bpf_mov R0 = R6 + bpf_exit +is a correct program. If there was R1 instead of R6, it would have +been rejected. + +load/store instructions are allowed only with registers of valid types, which +are PTR_TO_CTX, PTR_TO_MAP, FRAME_PTR. They are bounds and alignment checked. +For example: + bpf_mov R1 = 1 + bpf_mov R2 = 2 + bpf_xadd *(u32 *)(R1 + 3) += R2 + bpf_exit +will be rejected, since R1 doesn't have a valid pointer type at the time of +execution of instruction bpf_xadd. + +At the start R1 type is PTR_TO_CTX (a pointer to generic 'struct bpf_context') +A callback is used to customize verifier to restrict eBPF program access to only +certain fields within ctx structure with specified size and alignment. + +For example, the following insn: + bpf_ld R0 = *(u32 *)(R6 + 8) +intends to load a word from address R6 + 8 and store it into R0 +If R6=PTR_TO_CTX, via is_valid_access() callback the verifier will know +that offset 8 of size 4 bytes can be accessed for reading, otherwise +the verifier will reject the program. +If R6=FRAME_PTR, then access should be aligned and be within +stack bounds, which are [-MAX_BPF_STACK, 0). In this example offset is 8, +so it will fail verification, since it's out of bounds. + +The verifier will allow eBPF program to read data from stack only after +it wrote into it. +Classic BPF verifier does similar check with M[0-15] memory slots. +For example: + bpf_ld R0 = *(u32 *)(R10 - 4) + bpf_exit +is invalid program. +Though R10 is correct read-only register and has type FRAME_PTR +and R10 - 4 is within stack bounds, there were no stores into that location. + +Pointer register spill/fill is tracked as well, since four (R6-R9) +callee saved registers may not be enough for some programs. + +Allowed function calls are customized with bpf_verifier_ops->get_func_proto() +The eBPF verifier will check that registers match argument constraints. +After the call register R0 will be set to return type of the function. + +Function calls is a main mechanism to extend functionality of eBPF programs. +Socket filters may let programs to call one set of functions, whereas tracing +filters may allow completely different set. + +If a function made accessible to eBPF program, it needs to be thought through +from safety point of view. The verifier will guarantee that the function is +called with valid arguments. + +seccomp vs socket filters have different security restrictions for classic BPF. +Seccomp solves this by two stage verifier: classic BPF verifier is followed +by seccomp verifier. In case of eBPF one configurable verifier is shared for +all use cases. + +See details of eBPF verifier in kernel/bpf/verifier.c + +eBPF maps +--------- +'maps' is a generic storage of different types for sharing data between kernel +and userspace. + +The maps are accessed from user space via BPF syscall, which has commands: +- create a map with given type and attributes + map_fd = bpf(BPF_MAP_CREATE, union bpf_attr *attr, u32 size) + using attr->map_type, attr->key_size, attr->value_size, attr->max_entries + returns process-local file descriptor or negative error + +- lookup key in a given map + err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size) + using attr->map_fd, attr->key, attr->value + returns zero and stores found elem into value or negative error + +- create or update key/value pair in a given map + err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size) + using attr->map_fd, attr->key, attr->value + returns zero or negative error + +- find and delete element by key in a given map + err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size) + using attr->map_fd, attr->key + +- to delete map: close(fd) + Exiting process will delete maps automatically + +userspace programs use this syscall to create/access maps that eBPF programs +are concurrently updating. + +maps can have different types: hash, array, bloom filter, radix-tree, etc. + +The map is defined by: + . type + . max number of elements + . key size in bytes + . value size in bytes + +Understanding eBPF verifier messages +------------------------------------ + +The following are few examples of invalid eBPF programs and verifier error +messages as seen in the log: + +Program with unreachable instructions: +static struct bpf_insn prog[] = { + BPF_EXIT_INSN(), + BPF_EXIT_INSN(), +}; +Error: + unreachable insn 1 + +Program that reads uninitialized register: + BPF_MOV64_REG(BPF_REG_0, BPF_REG_2), + BPF_EXIT_INSN(), +Error: + 0: (bf) r0 = r2 + R2 !read_ok + +Program that doesn't initialize R0 before exiting: + BPF_MOV64_REG(BPF_REG_2, BPF_REG_1), + BPF_EXIT_INSN(), +Error: + 0: (bf) r2 = r1 + 1: (95) exit + R0 !read_ok + +Program that accesses stack out of bounds: + BPF_ST_MEM(BPF_DW, BPF_REG_10, 8, 0), + BPF_EXIT_INSN(), +Error: + 0: (7a) *(u64 *)(r10 +8) = 0 + invalid stack off=8 size=8 + +Program that doesn't initialize stack before passing its address into function: + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_EXIT_INSN(), +Error: + 0: (bf) r2 = r10 + 1: (07) r2 += -8 + 2: (b7) r1 = 0x0 + 3: (85) call 1 + invalid indirect read from stack off -8+0 size 8 + +Program that uses invalid map_fd=0 while calling to map_lookup_elem() function: + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_EXIT_INSN(), +Error: + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 0x0 + 4: (85) call 1 + fd 0 is not pointing to valid bpf_map + +Program that doesn't check return value of map_lookup_elem() before accessing +map element: + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0), + BPF_EXIT_INSN(), +Error: + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 0x0 + 4: (85) call 1 + 5: (7a) *(u64 *)(r0 +0) = 0 + R0 invalid mem access 'map_value_or_null' + +Program that correctly checks map_lookup_elem() returned value for NULL, but +accesses the memory with incorrect alignment: + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 4, 0), + BPF_EXIT_INSN(), +Error: + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 1 + 4: (85) call 1 + 5: (15) if r0 == 0x0 goto pc+1 + R0=map_ptr R10=fp + 6: (7a) *(u64 *)(r0 +4) = 0 + misaligned access off 4 size 8 + +Program that correctly checks map_lookup_elem() returned value for NULL and +accesses memory with correct alignment in one side of 'if' branch, but fails +to do so in the other side of 'if' branch: + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0), + BPF_EXIT_INSN(), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 1), + BPF_EXIT_INSN(), +Error: + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 1 + 4: (85) call 1 + 5: (15) if r0 == 0x0 goto pc+2 + R0=map_ptr R10=fp + 6: (7a) *(u64 *)(r0 +0) = 0 + 7: (95) exit + + from 5 to 8: R0=imm0 R10=fp + 8: (7a) *(u64 *)(r0 +0) = 1 + R0 invalid mem access 'imm' + Testing -------
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 29a9351..0307e28 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt
@@ -65,6 +65,12 @@ purge entries if there are fewer than this number. Default: 128 +neigh/default/gc_thresh2 - INTEGER + Threshold when garbage collector becomes more aggressive about + purging entries. Entries older than 5 seconds will be cleared + when over this number. + Default: 512 + neigh/default/gc_thresh3 - INTEGER Maximum number of neighbor entries allowed. Increase this when using large numbers of interfaces and when communicating @@ -580,12 +586,6 @@ not receive a window scaling option from them. Default: 0 -tcp_dma_copybreak - INTEGER - Lower limit, in bytes, of the size of socket reads that will be - offloaded to a DMA copy engine, if one is present in the system - and CONFIG_NET_DMA is enabled. - Default: 4096 - tcp_thin_linear_timeouts - BOOLEAN Enable dynamic triggering of linear timeouts for thin streams. If set, a check is performed upon retransmission by timeout to @@ -763,8 +763,21 @@ icmp_ratemask (see below) to specific targets. 0 to disable any limiting, otherwise the minimal space between responses in milliseconds. + Note that another sysctl, icmp_msgs_per_sec limits the number + of ICMP packets sent on all targets. Default: 1000 +icmp_msgs_per_sec - INTEGER + Limit maximal number of ICMP packets sent per second from this host. + Only messages whose type matches icmp_ratemask (see below) are + controlled by this limit. + Default: 1000 + +icmp_msgs_burst - INTEGER + icmp_msgs_per_sec controls number of ICMP packets sent per second, + while icmp_msgs_burst controls the burst size of these packets. + Default: 50 + icmp_ratemask - INTEGER Mask made of ICMP types for which rates are being limited. Significant bits: IHGFEDCBA9876543210 @@ -838,6 +851,11 @@ conf/all/* is special, changes the settings for all interfaces +igmp_qrv - INTEGER + Controls the IGMP query robustness variable (see RFC2236 8.1). + Default: 2 (as specified by RFC2236 8.1) + Minimum: 1 (as specified by RFC6636 4.5) + log_martians - BOOLEAN Log packets with impossible addresses to kernel log. log_martians for the interface will be enabled if at least one of @@ -941,14 +959,9 @@ FALSE (host) accept_local - BOOLEAN - Accept packets with local source addresses. In combination - with suitable routing, this can be used to direct packets - between two local interfaces over the wire and have them - accepted properly. - - rp_filter must be set to a non-zero value in order for - accept_local to have an effect. - + Accept packets with local source addresses. In combination with + suitable routing, this can be used to direct packets between two + local interfaces over the wire and have them accepted properly. default FALSE route_localnet - BOOLEAN @@ -1146,6 +1159,11 @@ FALSE: disabled Default: FALSE +mld_qrv - INTEGER + Controls the MLD query robustness variable (see RFC3810 9.1). + Default: 2 (as specified by RFC3810 9.1) + Minimum: 1 (as specified by RFC6636 4.5) + IPv6 Fragmentation: ip6frag_high_thresh - INTEGER
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index 0dffc6e..6915c6b 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt
@@ -99,6 +99,9 @@ pgset "clone_skb 1" sets the number of copies of the same packet pgset "clone_skb 0" use single SKB for all transmits + pgset "burst 8" uses xmit_more API to queue 8 copies of the same + packet and update HW tx queue tail pointer once. + "burst 1" is the default pgset "pkt_size 9014" sets packet size to 9014 pgset "frags 5" packet will consist of 5 fragments pgset "count 200000" sets number of packets to send, set to zero
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt index 897f942..412f45c 100644 --- a/Documentation/networking/timestamping.txt +++ b/Documentation/networking/timestamping.txt
@@ -1,102 +1,307 @@ -The existing interfaces for getting network packages time stamped are: + +1. Control Interfaces + +The interfaces for receiving network packages timestamps are: * SO_TIMESTAMP - Generate time stamp for each incoming packet using the (not necessarily - monotonous!) system time. Result is returned via recv_msg() in a - control message as timeval (usec resolution). + Generates a timestamp for each incoming packet in (not necessarily + monotonic) system time. Reports the timestamp via recvmsg() in a + control message as struct timeval (usec resolution). * SO_TIMESTAMPNS - Same time stamping mechanism as SO_TIMESTAMP, but returns result as - timespec (nsec resolution). + Same timestamping mechanism as SO_TIMESTAMP, but reports the + timestamp as struct timespec (nsec resolution). * IP_MULTICAST_LOOP + SO_TIMESTAMP[NS] - Only for multicasts: approximate send time stamp by receiving the looped - packet and using its receive time stamp. + Only for multicast:approximate transmit timestamp obtained by + reading the looped packet receive timestamp. -The following interface complements the existing ones: receive time -stamps can be generated and returned for arbitrary packets and much -closer to the point where the packet is really sent. Time stamps can -be generated in software (as before) or in hardware (if the hardware -has such a feature). +* SO_TIMESTAMPING + Generates timestamps on reception, transmission or both. Supports + multiple timestamp sources, including hardware. Supports generating + timestamps for stream sockets. -SO_TIMESTAMPING: -Instructs the socket layer which kind of information should be collected -and/or reported. The parameter is an integer with some of the following -bits set. Setting other bits is an error and doesn't change the current -state. +1.1 SO_TIMESTAMP: -Four of the bits are requests to the stack to try to generate -timestamps. Any combination of them is valid. +This socket option enables timestamping of datagrams on the reception +path. Because the destination socket, if any, is not known early in +the network stack, the feature has to be enabled for all packets. The +same is true for all early receive timestamp options. -SOF_TIMESTAMPING_TX_HARDWARE: try to obtain send time stamps in hardware -SOF_TIMESTAMPING_TX_SOFTWARE: try to obtain send time stamps in software -SOF_TIMESTAMPING_RX_HARDWARE: try to obtain receive time stamps in hardware -SOF_TIMESTAMPING_RX_SOFTWARE: try to obtain receive time stamps in software +For interface details, see `man 7 socket`. + + +1.2 SO_TIMESTAMPNS: + +This option is identical to SO_TIMESTAMP except for the returned data type. +Its struct timespec allows for higher resolution (ns) timestamps than the +timeval of SO_TIMESTAMP (ms). + + +1.3 SO_TIMESTAMPING: + +Supports multiple types of timestamp requests. As a result, this +socket option takes a bitmap of flags, not a boolean. In + + err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, (void *) val, &val); + +val is an integer with any of the following bits set. Setting other +bit returns EINVAL and does not change the current state. + + +1.3.1 Timestamp Generation + +Some bits are requests to the stack to try to generate timestamps. Any +combination of them is valid. Changes to these bits apply to newly +created packets, not to packets already in the stack. As a result, it +is possible to selectively request timestamps for a subset of packets +(e.g., for sampling) by embedding an send() call within two setsockopt +calls, one to enable timestamp generation and one to disable it. +Timestamps may also be generated for reasons other than being +requested by a particular socket, such as when receive timestamping is +enabled system wide, as explained earlier. + +SOF_TIMESTAMPING_RX_HARDWARE: + Request rx timestamps generated by the network adapter. + +SOF_TIMESTAMPING_RX_SOFTWARE: + Request rx timestamps when data enters the kernel. These timestamps + are generated just after a device driver hands a packet to the + kernel receive stack. + +SOF_TIMESTAMPING_TX_HARDWARE: + Request tx timestamps generated by the network adapter. + +SOF_TIMESTAMPING_TX_SOFTWARE: + Request tx timestamps when data leaves the kernel. These timestamps + are generated in the device driver as close as possible, but always + prior to, passing the packet to the network interface. Hence, they + require driver support and may not be available for all devices. + +SOF_TIMESTAMPING_TX_SCHED: + Request tx timestamps prior to entering the packet scheduler. Kernel + transmit latency is, if long, often dominated by queuing delay. The + difference between this timestamp and one taken at + SOF_TIMESTAMPING_TX_SOFTWARE will expose this latency independent + of protocol processing. The latency incurred in protocol + processing, if any, can be computed by subtracting a userspace + timestamp taken immediately before send() from this timestamp. On + machines with virtual devices where a transmitted packet travels + through multiple devices and, hence, multiple packet schedulers, + a timestamp is generated at each layer. This allows for fine + grained measurement of queuing delay. + +SOF_TIMESTAMPING_TX_ACK: + Request tx timestamps when all data in the send buffer has been + acknowledged. This only makes sense for reliable protocols. It is + currently only implemented for TCP. For that protocol, it may + over-report measurement, because the timestamp is generated when all + data up to and including the buffer at send() was acknowledged: the + cumulative acknowledgment. The mechanism ignores SACK and FACK. + + +1.3.2 Timestamp Reporting The other three bits control which timestamps will be reported in a -generated control message. If none of these bits are set or if none of -the set bits correspond to data that is available, then the control -message will not be generated: +generated control message. Changes to the bits take immediate +effect at the timestamp reporting locations in the stack. Timestamps +are only reported for packets that also have the relevant timestamp +generation request set. -SOF_TIMESTAMPING_SOFTWARE: report systime if available -SOF_TIMESTAMPING_SYS_HARDWARE: report hwtimetrans if available (deprecated) -SOF_TIMESTAMPING_RAW_HARDWARE: report hwtimeraw if available +SOF_TIMESTAMPING_SOFTWARE: + Report any software timestamps when available. -It is worth noting that timestamps may be collected for reasons other -than being requested by a particular socket with -SOF_TIMESTAMPING_[TR]X_(HARD|SOFT)WARE. For example, most drivers that -can generate hardware receive timestamps ignore -SOF_TIMESTAMPING_RX_HARDWARE. It is still a good idea to set that flag -in case future drivers pay attention. +SOF_TIMESTAMPING_SYS_HARDWARE: + This option is deprecated and ignored. -If timestamps are reported, they will appear in a control message with -cmsg_level==SOL_SOCKET, cmsg_type==SO_TIMESTAMPING, and a payload like -this: +SOF_TIMESTAMPING_RAW_HARDWARE: + Report hardware timestamps as generated by + SOF_TIMESTAMPING_TX_HARDWARE when available. + + +1.3.3 Timestamp Options + +The interface supports one option + +SOF_TIMESTAMPING_OPT_ID: + + Generate a unique identifier along with each packet. A process can + have multiple concurrent timestamping requests outstanding. Packets + can be reordered in the transmit path, for instance in the packet + scheduler. In that case timestamps will be queued onto the error + queue out of order from the original send() calls. This option + embeds a counter that is incremented at send() time, to order + timestamps within a flow. + + This option is implemented only for transmit timestamps. There, the + timestamp is always looped along with a struct sock_extended_err. + The option modifies field ee_info to pass an id that is unique + among all possibly concurrently outstanding timestamp requests for + that socket. In practice, it is a monotonically increasing u32 + (that wraps). + + In datagram sockets, the counter increments on each send call. In + stream sockets, it increments with every byte. + + +1.4 Bytestream Timestamps + +The SO_TIMESTAMPING interface supports timestamping of bytes in a +bytestream. Each request is interpreted as a request for when the +entire contents of the buffer has passed a timestamping point. That +is, for streams option SOF_TIMESTAMPING_TX_SOFTWARE will record +when all bytes have reached the device driver, regardless of how +many packets the data has been converted into. + +In general, bytestreams have no natural delimiters and therefore +correlating a timestamp with data is non-trivial. A range of bytes +may be split across segments, any segments may be merged (possibly +coalescing sections of previously segmented buffers associated with +independent send() calls). Segments can be reordered and the same +byte range can coexist in multiple segments for protocols that +implement retransmissions. + +It is essential that all timestamps implement the same semantics, +regardless of these possible transformations, as otherwise they are +incomparable. Handling "rare" corner cases differently from the +simple case (a 1:1 mapping from buffer to skb) is insufficient +because performance debugging often needs to focus on such outliers. + +In practice, timestamps can be correlated with segments of a +bytestream consistently, if both semantics of the timestamp and the +timing of measurement are chosen correctly. This challenge is no +different from deciding on a strategy for IP fragmentation. There, the +definition is that only the first fragment is timestamped. For +bytestreams, we chose that a timestamp is generated only when all +bytes have passed a point. SOF_TIMESTAMPING_TX_ACK as defined is easy to +implement and reason about. An implementation that has to take into +account SACK would be more complex due to possible transmission holes +and out of order arrival. + +On the host, TCP can also break the simple 1:1 mapping from buffer to +skbuff as a result of Nagle, cork, autocork, segmentation and GSO. The +implementation ensures correctness in all cases by tracking the +individual last byte passed to send(), even if it is no longer the +last byte after an skbuff extend or merge operation. It stores the +relevant sequence number in skb_shinfo(skb)->tskey. Because an skbuff +has only one such field, only one timestamp can be generated. + +In rare cases, a timestamp request can be missed if two requests are +collapsed onto the same skb. A process can detect this situation by +enabling SOF_TIMESTAMPING_OPT_ID and comparing the byte offset at +send time with the value returned for each timestamp. It can prevent +the situation by always flushing the TCP stack in between requests, +for instance by enabling TCP_NODELAY and disabling TCP_CORK and +autocork. + +These precautions ensure that the timestamp is generated only when all +bytes have passed a timestamp point, assuming that the network stack +itself does not reorder the segments. The stack indeed tries to avoid +reordering. The one exception is under administrator control: it is +possible to construct a packet scheduler configuration that delays +segments from the same stream differently. Such a setup would be +unusual. + + +2 Data Interfaces + +Timestamps are read using the ancillary data feature of recvmsg(). +See `man 3 cmsg` for details of this interface. The socket manual +page (`man 7 socket`) describes how timestamps generated with +SO_TIMESTAMP and SO_TIMESTAMPNS records can be retrieved. + + +2.1 SCM_TIMESTAMPING records + +These timestamps are returned in a control message with cmsg_level +SOL_SOCKET, cmsg_type SCM_TIMESTAMPING, and payload of type struct scm_timestamping { - struct timespec systime; - struct timespec hwtimetrans; - struct timespec hwtimeraw; + struct timespec ts[3]; }; -recvmsg() can be used to get this control message for regular incoming -packets. For send time stamps the outgoing packet is looped back to -the socket's error queue with the send time stamp(s) attached. It can -be received with recvmsg(flags=MSG_ERRQUEUE). The call returns the -original outgoing packet data including all headers preprended down to -and including the link layer, the scm_timestamping control message and -a sock_extended_err control message with ee_errno==ENOMSG and -ee_origin==SO_EE_ORIGIN_TIMESTAMPING. A socket with such a pending -bounced packet is ready for reading as far as select() is concerned. -If the outgoing packet has to be fragmented, then only the first -fragment is time stamped and returned to the sending socket. +The structure can return up to three timestamps. This is a legacy +feature. Only one field is non-zero at any time. Most timestamps +are passed in ts[0]. Hardware timestamps are passed in ts[2]. -All three values correspond to the same event in time, but were -generated in different ways. Each of these values may be empty (= all -zero), in which case no such value was available. If the application -is not interested in some of these values, they can be left blank to -avoid the potential overhead of calculating them. +ts[1] used to hold hardware timestamps converted to system time. +Instead, expose the hardware clock device on the NIC directly as +a HW PTP clock source, to allow time conversion in userspace and +optionally synchronize system time with a userspace PTP stack such +as linuxptp. For the PTP clock API, see Documentation/ptp/ptp.txt. -systime is the value of the system time at that moment. This -corresponds to the value also returned via SO_TIMESTAMP[NS]. If the -time stamp was generated by hardware, then this field is -empty. Otherwise it is filled in if SOF_TIMESTAMPING_SOFTWARE is -set. +2.1.1 Transmit timestamps with MSG_ERRQUEUE -hwtimeraw is the original hardware time stamp. Filled in if -SOF_TIMESTAMPING_RAW_HARDWARE is set. No assumptions about its -relation to system time should be made. +For transmit timestamps the outgoing packet is looped back to the +socket's error queue with the send timestamp(s) attached. A process +receives the timestamps by calling recvmsg() with flag MSG_ERRQUEUE +set and with a msg_control buffer sufficiently large to receive the +relevant metadata structures. The recvmsg call returns the original +outgoing data packet with two ancillary messages attached. -hwtimetrans is always zero. This field is deprecated. It used to hold -hw timestamps converted to system time. Instead, expose the hardware -clock device on the NIC directly as a HW PTP clock source, to allow -time conversion in userspace and optionally synchronize system time -with a userspace PTP stack such as linuxptp. For the PTP clock API, -see Documentation/ptp/ptp.txt. +A message of cm_level SOL_IP(V6) and cm_type IP(V6)_RECVERR +embeds a struct sock_extended_err. This defines the error type. For +timestamps, the ee_errno field is ENOMSG. The other ancillary message +will have cm_level SOL_SOCKET and cm_type SCM_TIMESTAMPING. This +embeds the struct scm_timestamping. -SIOCSHWTSTAMP, SIOCGHWTSTAMP: +2.1.1.2 Timestamp types + +The semantics of the three struct timespec are defined by field +ee_info in the extended error structure. It contains a value of +type SCM_TSTAMP_* to define the actual timestamp passed in +scm_timestamping. + +The SCM_TSTAMP_* types are 1:1 matches to the SOF_TIMESTAMPING_* +control fields discussed previously, with one exception. For legacy +reasons, SCM_TSTAMP_SND is equal to zero and can be set for both +SOF_TIMESTAMPING_TX_HARDWARE and SOF_TIMESTAMPING_TX_SOFTWARE. It +is the first if ts[2] is non-zero, the second otherwise, in which +case the timestamp is stored in ts[0]. + + +2.1.1.3 Fragmentation + +Fragmentation of outgoing datagrams is rare, but is possible, e.g., by +explicitly disabling PMTU discovery. If an outgoing packet is fragmented, +then only the first fragment is timestamped and returned to the sending +socket. + + +2.1.1.4 Packet Payload + +The calling application is often not interested in receiving the whole +packet payload that it passed to the stack originally: the socket +error queue mechanism is just a method to piggyback the timestamp on. +In this case, the application can choose to read datagrams with a +smaller buffer, possibly even of length 0. The payload is truncated +accordingly. Until the process calls recvmsg() on the error queue, +however, the full packet is queued, taking up budget from SO_RCVBUF. + + +2.1.1.5 Blocking Read + +Reading from the error queue is always a non-blocking operation. To +block waiting on a timestamp, use poll or select. poll() will return +POLLERR in pollfd.revents if any data is ready on the error queue. +There is no need to pass this flag in pollfd.events. This flag is +ignored on request. See also `man 2 poll`. + + +2.1.2 Receive timestamps + +On reception, there is no reason to read from the socket error queue. +The SCM_TIMESTAMPING ancillary data is sent along with the packet data +on a normal recvmsg(). Since this is not a socket error, it is not +accompanied by a message SOL_IP(V6)/IP(V6)_RECVERROR. In this case, +the meaning of the three fields in struct scm_timestamping is +implicitly defined. ts[0] holds a software timestamp if set, ts[1] +is again deprecated and ts[2] holds a hardware timestamp if set. + + +3. Hardware Timestamping configuration: SIOCSHWTSTAMP and SIOCGHWTSTAMP Hardware time stamping must also be initialized for each device driver that is expected to do hardware time stamping. The parameter is defined in @@ -167,8 +372,7 @@ */ }; - -DEVICE IMPLEMENTATION +3.1 Hardware Timestamping Implementation: Device Drivers A driver which supports hardware time stamping must support the SIOCSHWTSTAMP ioctl and update the supplied struct hwtstamp_config with
diff --git a/Documentation/networking/timestamping/.gitignore b/Documentation/networking/timestamping/.gitignore index a380159..9e69e98 100644 --- a/Documentation/networking/timestamping/.gitignore +++ b/Documentation/networking/timestamping/.gitignore
@@ -1,2 +1,3 @@ timestamping +txtimestamp hwtstamp_config
diff --git a/Documentation/networking/timestamping/Makefile b/Documentation/networking/timestamping/Makefile index d934afc..8c20dfa 100644 --- a/Documentation/networking/timestamping/Makefile +++ b/Documentation/networking/timestamping/Makefile
@@ -1,14 +1,14 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o +# To compile, from the source root +# +# make headers_install +# make M=documentation # List of programs to build -hostprogs-y := timestamping hwtstamp_config +hostprogs-y := hwtstamp_config timestamping txtimestamp # Tell kbuild to always build the programs always := $(hostprogs-y) HOSTCFLAGS_timestamping.o += -I$(objtree)/usr/include +HOSTCFLAGS_txtimestamp.o += -I$(objtree)/usr/include HOSTCFLAGS_hwtstamp_config.o += -I$(objtree)/usr/include - -clean: - rm -f timestamping hwtstamp_config
diff --git a/Documentation/networking/timestamping/txtimestamp.c b/Documentation/networking/timestamping/txtimestamp.c new file mode 100644 index 0000000..b32fc2a --- /dev/null +++ b/Documentation/networking/timestamping/txtimestamp.c
@@ -0,0 +1,469 @@ +/* + * Copyright 2014 Google Inc. + * Author: willemb@google.com (Willem de Bruijn) + * + * Test software tx timestamping, including + * + * - SCHED, SND and ACK timestamps + * - RAW, UDP and TCP + * - IPv4 and IPv6 + * - various packet sizes (to test GSO and TSO) + * + * Consult the command line arguments for help on running + * the various testcases. + * + * This test requires a dummy TCP server. + * A simple `nc6 [-u] -l -p $DESTPORT` will do + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <arpa/inet.h> +#include <asm/types.h> +#include <error.h> +#include <errno.h> +#include <linux/errqueue.h> +#include <linux/if_ether.h> +#include <linux/net_tstamp.h> +#include <netdb.h> +#include <net/if.h> +#include <netinet/in.h> +#include <netinet/ip.h> +#include <netinet/udp.h> +#include <netinet/tcp.h> +#include <netpacket/packet.h> +#include <poll.h> +#include <stdarg.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/ioctl.h> +#include <sys/select.h> +#include <sys/socket.h> +#include <sys/time.h> +#include <sys/types.h> +#include <time.h> +#include <unistd.h> + +/* command line parameters */ +static int cfg_proto = SOCK_STREAM; +static int cfg_ipproto = IPPROTO_TCP; +static int cfg_num_pkts = 4; +static int do_ipv4 = 1; +static int do_ipv6 = 1; +static int cfg_payload_len = 10; +static uint16_t dest_port = 9000; + +static struct sockaddr_in daddr; +static struct sockaddr_in6 daddr6; +static struct timespec ts_prev; + +static void __print_timestamp(const char *name, struct timespec *cur, + uint32_t key, int payload_len) +{ + if (!(cur->tv_sec | cur->tv_nsec)) + return; + + fprintf(stderr, " %s: %lu s %lu us (seq=%u, len=%u)", + name, cur->tv_sec, cur->tv_nsec / 1000, + key, payload_len); + + if ((ts_prev.tv_sec | ts_prev.tv_nsec)) { + int64_t cur_ms, prev_ms; + + cur_ms = (long) cur->tv_sec * 1000 * 1000; + cur_ms += cur->tv_nsec / 1000; + + prev_ms = (long) ts_prev.tv_sec * 1000 * 1000; + prev_ms += ts_prev.tv_nsec / 1000; + + fprintf(stderr, " (%+ld us)", cur_ms - prev_ms); + } + + ts_prev = *cur; + fprintf(stderr, "\n"); +} + +static void print_timestamp_usr(void) +{ + struct timespec ts; + struct timeval tv; /* avoid dependency on -lrt */ + + gettimeofday(&tv, NULL); + ts.tv_sec = tv.tv_sec; + ts.tv_nsec = tv.tv_usec * 1000; + + __print_timestamp(" USR", &ts, 0, 0); +} + +static void print_timestamp(struct scm_timestamping *tss, int tstype, + int tskey, int payload_len) +{ + const char *tsname; + + switch (tstype) { + case SCM_TSTAMP_SCHED: + tsname = " ENQ"; + break; + case SCM_TSTAMP_SND: + tsname = " SND"; + break; + case SCM_TSTAMP_ACK: + tsname = " ACK"; + break; + default: + error(1, 0, "unknown timestamp type: %u", + tstype); + } + __print_timestamp(tsname, &tss->ts[0], tskey, payload_len); +} + +static void __poll(int fd) +{ + struct pollfd pollfd; + int ret; + + memset(&pollfd, 0, sizeof(pollfd)); + pollfd.fd = fd; + ret = poll(&pollfd, 1, 100); + if (ret != 1) + error(1, errno, "poll"); +} + +static void __recv_errmsg_cmsg(struct msghdr *msg, int payload_len) +{ + struct sock_extended_err *serr = NULL; + struct scm_timestamping *tss = NULL; + struct cmsghdr *cm; + + for (cm = CMSG_FIRSTHDR(msg); + cm && cm->cmsg_len; + cm = CMSG_NXTHDR(msg, cm)) { + if (cm->cmsg_level == SOL_SOCKET && + cm->cmsg_type == SCM_TIMESTAMPING) { + tss = (void *) CMSG_DATA(cm); + } else if ((cm->cmsg_level == SOL_IP && + cm->cmsg_type == IP_RECVERR) || + (cm->cmsg_level == SOL_IPV6 && + cm->cmsg_type == IPV6_RECVERR)) { + + serr = (void *) CMSG_DATA(cm); + if (serr->ee_errno != ENOMSG || + serr->ee_origin != SO_EE_ORIGIN_TIMESTAMPING) { + fprintf(stderr, "unknown ip error %d %d\n", + serr->ee_errno, + serr->ee_origin); + serr = NULL; + } + } else + fprintf(stderr, "unknown cmsg %d,%d\n", + cm->cmsg_level, cm->cmsg_type); + } + + if (serr && tss) + print_timestamp(tss, serr->ee_info, serr->ee_data, payload_len); +} + +static int recv_errmsg(int fd) +{ + static char ctrl[1024 /* overprovision*/]; + static struct msghdr msg; + struct iovec entry; + static char *data; + int ret = 0; + + data = malloc(cfg_payload_len); + if (!data) + error(1, 0, "malloc"); + + memset(&msg, 0, sizeof(msg)); + memset(&entry, 0, sizeof(entry)); + memset(ctrl, 0, sizeof(ctrl)); + + entry.iov_base = data; + entry.iov_len = cfg_payload_len; + msg.msg_iov = &entry; + msg.msg_iovlen = 1; + msg.msg_name = NULL; + msg.msg_namelen = 0; + msg.msg_control = ctrl; + msg.msg_controllen = sizeof(ctrl); + + ret = recvmsg(fd, &msg, MSG_ERRQUEUE); + if (ret == -1 && errno != EAGAIN) + error(1, errno, "recvmsg"); + + __recv_errmsg_cmsg(&msg, ret); + + free(data); + return ret == -1; +} + +static void do_test(int family, unsigned int opt) +{ + char *buf; + int fd, i, val, total_len; + + if (family == IPPROTO_IPV6 && cfg_proto != SOCK_STREAM) { + /* due to lack of checksum generation code */ + fprintf(stderr, "test: skipping datagram over IPv6\n"); + return; + } + + total_len = cfg_payload_len; + if (cfg_proto == SOCK_RAW) { + total_len += sizeof(struct udphdr); + if (cfg_ipproto == IPPROTO_RAW) + total_len += sizeof(struct iphdr); + } + + buf = malloc(total_len); + if (!buf) + error(1, 0, "malloc"); + + fd = socket(family, cfg_proto, cfg_ipproto); + if (fd < 0) + error(1, errno, "socket"); + + if (cfg_proto == SOCK_STREAM) { + val = 1; + if (setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, + (char*) &val, sizeof(val))) + error(1, 0, "setsockopt no nagle"); + + if (family == PF_INET) { + if (connect(fd, (void *) &daddr, sizeof(daddr))) + error(1, errno, "connect ipv4"); + } else { + if (connect(fd, (void *) &daddr6, sizeof(daddr6))) + error(1, errno, "connect ipv6"); + } + } + + opt |= SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_OPT_ID; + if (setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, + (char *) &opt, sizeof(opt))) + error(1, 0, "setsockopt timestamping"); + + for (i = 0; i < cfg_num_pkts; i++) { + memset(&ts_prev, 0, sizeof(ts_prev)); + memset(buf, 'a' + i, total_len); + buf[total_len - 2] = '\n'; + buf[total_len - 1] = '\0'; + + if (cfg_proto == SOCK_RAW) { + struct udphdr *udph; + int off = 0; + + if (cfg_ipproto == IPPROTO_RAW) { + struct iphdr *iph = (void *) buf; + + memset(iph, 0, sizeof(*iph)); + iph->ihl = 5; + iph->version = 4; + iph->ttl = 2; + iph->daddr = daddr.sin_addr.s_addr; + iph->protocol = IPPROTO_UDP; + /* kernel writes saddr, csum, len */ + + off = sizeof(*iph); + } + + udph = (void *) buf + off; + udph->source = ntohs(9000); /* random spoof */ + udph->dest = ntohs(dest_port); + udph->len = ntohs(sizeof(*udph) + cfg_payload_len); + udph->check = 0; /* not allowed for IPv6 */ + } + + print_timestamp_usr(); + if (cfg_proto != SOCK_STREAM) { + if (family == PF_INET) + val = sendto(fd, buf, total_len, 0, (void *) &daddr, sizeof(daddr)); + else + val = sendto(fd, buf, total_len, 0, (void *) &daddr6, sizeof(daddr6)); + } else { + val = send(fd, buf, cfg_payload_len, 0); + } + if (val != total_len) + error(1, errno, "send"); + + /* wait for all errors to be queued, else ACKs arrive OOO */ + usleep(50 * 1000); + + __poll(fd); + + while (!recv_errmsg(fd)) {} + } + + if (close(fd)) + error(1, errno, "close"); + + free(buf); + usleep(400 * 1000); +} + +static void __attribute__((noreturn)) usage(const char *filepath) +{ + fprintf(stderr, "\nUsage: %s [options] hostname\n" + "\nwhere options are:\n" + " -4: only IPv4\n" + " -6: only IPv6\n" + " -h: show this message\n" + " -l N: send N bytes at a time\n" + " -r: use raw\n" + " -R: use raw (IP_HDRINCL)\n" + " -p N: connect to port N\n" + " -u: use udp\n", + filepath); + exit(1); +} + +static void parse_opt(int argc, char **argv) +{ + int proto_count = 0; + char c; + + while ((c = getopt(argc, argv, "46hl:p:rRu")) != -1) { + switch (c) { + case '4': + do_ipv6 = 0; + break; + case '6': + do_ipv4 = 0; + break; + case 'r': + proto_count++; + cfg_proto = SOCK_RAW; + cfg_ipproto = IPPROTO_UDP; + break; + case 'R': + proto_count++; + cfg_proto = SOCK_RAW; + cfg_ipproto = IPPROTO_RAW; + break; + case 'u': + proto_count++; + cfg_proto = SOCK_DGRAM; + cfg_ipproto = IPPROTO_UDP; + break; + case 'l': + cfg_payload_len = strtoul(optarg, NULL, 10); + break; + case 'p': + dest_port = strtoul(optarg, NULL, 10); + break; + case 'h': + default: + usage(argv[0]); + } + } + + if (!cfg_payload_len) + error(1, 0, "payload may not be nonzero"); + if (cfg_proto != SOCK_STREAM && cfg_payload_len > 1472) + error(1, 0, "udp packet might exceed expected MTU"); + if (!do_ipv4 && !do_ipv6) + error(1, 0, "pass -4 or -6, not both"); + if (proto_count > 1) + error(1, 0, "pass -r, -R or -u, not multiple"); + + if (optind != argc - 1) + error(1, 0, "missing required hostname argument"); +} + +static void resolve_hostname(const char *hostname) +{ + struct addrinfo *addrs, *cur; + int have_ipv4 = 0, have_ipv6 = 0; + + if (getaddrinfo(hostname, NULL, NULL, &addrs)) + error(1, errno, "getaddrinfo"); + + cur = addrs; + while (cur && !have_ipv4 && !have_ipv6) { + if (!have_ipv4 && cur->ai_family == AF_INET) { + memcpy(&daddr, cur->ai_addr, sizeof(daddr)); + daddr.sin_port = htons(dest_port); + have_ipv4 = 1; + } + else if (!have_ipv6 && cur->ai_family == AF_INET6) { + memcpy(&daddr6, cur->ai_addr, sizeof(daddr6)); + daddr6.sin6_port = htons(dest_port); + have_ipv6 = 1; + } + cur = cur->ai_next; + } + if (addrs) + freeaddrinfo(addrs); + + do_ipv4 &= have_ipv4; + do_ipv6 &= have_ipv6; +} + +static void do_main(int family) +{ + fprintf(stderr, "family: %s\n", + family == PF_INET ? "INET" : "INET6"); + + fprintf(stderr, "test SND\n"); + do_test(family, SOF_TIMESTAMPING_TX_SOFTWARE); + + fprintf(stderr, "test ENQ\n"); + do_test(family, SOF_TIMESTAMPING_TX_SCHED); + + fprintf(stderr, "test ENQ + SND\n"); + do_test(family, SOF_TIMESTAMPING_TX_SCHED | + SOF_TIMESTAMPING_TX_SOFTWARE); + + if (cfg_proto == SOCK_STREAM) { + fprintf(stderr, "\ntest ACK\n"); + do_test(family, SOF_TIMESTAMPING_TX_ACK); + + fprintf(stderr, "\ntest SND + ACK\n"); + do_test(family, SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_TX_ACK); + + fprintf(stderr, "\ntest ENQ + SND + ACK\n"); + do_test(family, SOF_TIMESTAMPING_TX_SCHED | + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_TX_ACK); + } +} + +const char *sock_names[] = { NULL, "TCP", "UDP", "RAW" }; + +int main(int argc, char **argv) +{ + if (argc == 1) + usage(argv[0]); + + parse_opt(argc, argv); + resolve_hostname(argv[argc - 1]); + + fprintf(stderr, "protocol: %s\n", sock_names[cfg_proto]); + fprintf(stderr, "payload: %u\n", cfg_payload_len); + fprintf(stderr, "server port: %u\n", dest_port); + fprintf(stderr, "\n"); + + if (do_ipv4) + do_main(PF_INET); + if (do_ipv6) + do_main(PF_INET6); + + return 0; +}
diff --git a/Documentation/pcmcia/Makefile b/Documentation/pcmcia/Makefile index accde87..47a8fa1 100644 --- a/Documentation/pcmcia/Makefile +++ b/Documentation/pcmcia/Makefile
@@ -1,6 +1,3 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - # List of programs to build hostprogs-y := crc32hash
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 23f1590..b8f2147 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt
@@ -702,7 +702,7 @@ return 0; } -int foo_enable(struct pinctrl_dev *pctldev, unsigned selector, +int foo_set_mux(struct pinctrl_dev *pctldev, unsigned selector, unsigned group) { u8 regbit = (1 << selector + group); @@ -711,21 +711,11 @@ return 0; } -void foo_disable(struct pinctrl_dev *pctldev, unsigned selector, - unsigned group) -{ - u8 regbit = (1 << selector + group); - - writeb((readb(MUX) & ~(regbit)), MUX) - return 0; -} - struct pinmux_ops foo_pmxops = { .get_functions_count = foo_get_functions_count, .get_function_name = foo_get_fname, .get_function_groups = foo_get_groups, - .enable = foo_enable, - .disable = foo_disable, + .set_mux = foo_set_mux, }; /* Pinmux operations are handled by some pin controller */
diff --git a/Documentation/power/charger-manager.txt b/Documentation/power/charger-manager.txt index b4f7f4b..9ff1105 100644 --- a/Documentation/power/charger-manager.txt +++ b/Documentation/power/charger-manager.txt
@@ -29,7 +29,7 @@ While the battery is being charged and the system is in suspend-to-RAM, we may need to monitor the battery health by looking at the ambient or battery temperature. We can accomplish this by waking up the system - periodically. However, such a method wakes up devices unncessary for + periodically. However, such a method wakes up devices unnecessarily for monitoring the battery health and tasks, and user processes that are supposed to be kept suspended. That, in turn, incurs unnecessary power consumption and slow down charging process. Or even, such peak power
diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt index a5da5c7..129f7c0 100644 --- a/Documentation/power/pm_qos_interface.txt +++ b/Documentation/power/pm_qos_interface.txt
@@ -5,7 +5,8 @@ one of the parameters. Two different PM QoS frameworks are available: -1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput. +1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput, +memory_bandwidth. 2. the per-device PM QoS framework provides the API to manage the per-device latency constraints and PM QoS flags. @@ -13,6 +14,7 @@ * latency: usec * timeout: usec * throughput: kbs (kilo bit / sec) + * memory bandwidth: mbs (mega bit / sec) 1. PM QoS framework
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 48cff88..82dacc0 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt
@@ -101,6 +101,10 @@ these ones should be used if hardware could only guess (measure and retain) the thresholds of a given power supply. +VOLTAGE_BOOT - Reports the voltage measured during boot + +CURRENT_BOOT - Reports the current measured during boot + CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN - design charge values, when battery considered full/empty. @@ -123,6 +127,8 @@ CHARGE_TERM_CURRENT - Charge termination current used to detect the end of charge condition. +CALIBRATE - battery or coulomb counter calibration status + CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger. CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the power supply object.
diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.txt new file mode 100644 index 0000000..6966364 --- /dev/null +++ b/Documentation/power/suspend-and-interrupts.txt
@@ -0,0 +1,123 @@ +System Suspend and Device Interrupts + +Copyright (C) 2014 Intel Corp. +Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> + + +Suspending and Resuming Device IRQs +----------------------------------- + +Device interrupt request lines (IRQs) are generally disabled during system +suspend after the "late" phase of suspending devices (that is, after all of the +->prepare, ->suspend and ->suspend_late callbacks have been executed for all +devices). That is done by suspend_device_irqs(). + +The rationale for doing so is that after the "late" phase of device suspend +there is no legitimate reason why any interrupts from suspended devices should +trigger and if any devices have not been suspended properly yet, it is better to +block interrupts from them anyway. Also, in the past we had problems with +interrupt handlers for shared IRQs that device drivers implementing them were +not prepared for interrupts triggering after their devices had been suspended. +In some cases they would attempt to access, for example, memory address spaces +of suspended devices and cause unpredictable behavior to ensue as a result. +Unfortunately, such problems are very difficult to debug and the introduction +of suspend_device_irqs(), along with the "noirq" phase of device suspend and +resume, was the only practical way to mitigate them. + +Device IRQs are re-enabled during system resume, right before the "early" phase +of resuming devices (that is, before starting to execute ->resume_early +callbacks for devices). The function doing that is resume_device_irqs(). + + +The IRQF_NO_SUSPEND Flag +------------------------ + +There are interrupts that can legitimately trigger during the entire system +suspend-resume cycle, including the "noirq" phases of suspending and resuming +devices as well as during the time when nonboot CPUs are taken offline and +brought back online. That applies to timer interrupts in the first place, +but also to IPIs and to some other special-purpose interrupts. + +The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when +requesting a special-purpose interrupt. It causes suspend_device_irqs() to +leave the corresponding IRQ enabled so as to allow the interrupt to work all +the time as expected. + +Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one +user of it. Thus, if the IRQ is shared, all of the interrupt handlers installed +for it will be executed as usual after suspend_device_irqs(), even if the +IRQF_NO_SUSPEND flag was not passed to request_irq() (or equivalent) by some of +the IRQ's users. For this reason, using IRQF_NO_SUSPEND and IRQF_SHARED at the +same time should be avoided. + + +System Wakeup Interrupts, enable_irq_wake() and disable_irq_wake() +------------------------------------------------------------------ + +System wakeup interrupts generally need to be configured to wake up the system +from sleep states, especially if they are used for different purposes (e.g. as +I/O interrupts) in the working state. + +That may involve turning on a special signal handling logic within the platform +(such as an SoC) so that signals from a given line are routed in a different way +during system sleep so as to trigger a system wakeup when needed. For example, +the platform may include a dedicated interrupt controller used specifically for +handling system wakeup events. Then, if a given interrupt line is supposed to +wake up the system from sleep sates, the corresponding input of that interrupt +controller needs to be enabled to receive signals from the line in question. +After wakeup, it generally is better to disable that input to prevent the +dedicated controller from triggering interrupts unnecessarily. + +The IRQ subsystem provides two helper functions to be used by device drivers for +those purposes. Namely, enable_irq_wake() turns on the platform's logic for +handling the given IRQ as a system wakeup interrupt line and disable_irq_wake() +turns that logic off. + +Calling enable_irq_wake() causes suspend_device_irqs() to treat the given IRQ +in a special way. Namely, the IRQ remains enabled, by on the first interrupt +it will be disabled, marked as pending and "suspended" so that it will be +re-enabled by resume_device_irqs() during the subsequent system resume. Also +the PM core is notified about the event which casues the system suspend in +progress to be aborted (that doesn't have to happen immediately, but at one +of the points where the suspend thread looks for pending wakeup events). + +This way every interrupt from a wakeup interrupt source will either cause the +system suspend currently in progress to be aborted or wake up the system if +already suspended. However, after suspend_device_irqs() interrupt handlers are +not executed for system wakeup IRQs. They are only executed for IRQF_NO_SUSPEND +IRQs at that time, but those IRQs should not be configured for system wakeup +using enable_irq_wake(). + + +Interrupts and Suspend-to-Idle +------------------------------ + +Suspend-to-idle (also known as the "freeze" sleep state) is a relatively new +system sleep state that works by idling all of the processors and waiting for +interrupts right after the "noirq" phase of suspending devices. + +Of course, this means that all of the interrupts with the IRQF_NO_SUSPEND flag +set will bring CPUs out of idle while in that state, but they will not cause the +IRQ subsystem to trigger a system wakeup. + +System wakeup interrupts, in turn, will trigger wakeup from suspend-to-idle in +analogy with what they do in the full system suspend case. The only difference +is that the wakeup from suspend-to-idle is signaled using the usual working +state interrupt delivery mechanisms and doesn't require the platform to use +any special interrupt handling logic for it to work. + + +IRQF_NO_SUSPEND and enable_irq_wake() +------------------------------------- + +There are no valid reasons to use both enable_irq_wake() and the IRQF_NO_SUSPEND +flag on the same IRQ. + +First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND +interrupts (interrupt handlers are invoked after suspend_device_irqs()) are +directly at odds with the rules for handling system wakeup interrupts (interrupt +handlers are not invoked after suspend_device_irqs()). + +Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not +to individual interrupt handlers, so sharing an IRQ between a system wakeup +interrupt source and an IRQF_NO_SUSPEND interrupt source does not make sense.
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index a68784d..6fd0e8b 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX
@@ -11,6 +11,8 @@ cpu_features.txt - info on how we support a variety of CPUs with minimal compile-time options. +cxl.txt + - Overview of the CXL driver. eeh-pci-error-recovery.txt - info on PCI Bus EEH Error Recovery firmware-assisted-dump.txt
diff --git a/Documentation/powerpc/cxl.txt b/Documentation/powerpc/cxl.txt new file mode 100644 index 0000000..2c71ecc --- /dev/null +++ b/Documentation/powerpc/cxl.txt
@@ -0,0 +1,379 @@ +Coherent Accelerator Interface (CXL) +==================================== + +Introduction +============ + + The coherent accelerator interface is designed to allow the + coherent connection of accelerators (FPGAs and other devices) to a + POWER system. These devices need to adhere to the Coherent + Accelerator Interface Architecture (CAIA). + + IBM refers to this as the Coherent Accelerator Processor Interface + or CAPI. In the kernel it's referred to by the name CXL to avoid + confusion with the ISDN CAPI subsystem. + + Coherent in this context means that the accelerator and CPUs can + both access system memory directly and with the same effective + addresses. + + +Hardware overview +================= + + POWER8 FPGA + +----------+ +---------+ + | | | | + | CPU | | AFU | + | | | | + | | | | + | | | | + +----------+ +---------+ + | PHB | | | + | +------+ | PSL | + | | CAPP |<------>| | + +---+------+ PCIE +---------+ + + The POWER8 chip has a Coherently Attached Processor Proxy (CAPP) + unit which is part of the PCIe Host Bridge (PHB). This is managed + by Linux by calls into OPAL. Linux doesn't directly program the + CAPP. + + The FPGA (or coherently attached device) consists of two parts. + The POWER Service Layer (PSL) and the Accelerator Function Unit + (AFU). The AFU is used to implement specific functionality behind + the PSL. The PSL, among other things, provides memory address + translation services to allow each AFU direct access to userspace + memory. + + The AFU is the core part of the accelerator (eg. the compression, + crypto etc function). The kernel has no knowledge of the function + of the AFU. Only userspace interacts directly with the AFU. + + The PSL provides the translation and interrupt services that the + AFU needs. This is what the kernel interacts with. For example, if + the AFU needs to read a particular effective address, it sends + that address to the PSL, the PSL then translates it, fetches the + data from memory and returns it to the AFU. If the PSL has a + translation miss, it interrupts the kernel and the kernel services + the fault. The context to which this fault is serviced is based on + who owns that acceleration function. + + +AFU Modes +========= + + There are two programming modes supported by the AFU. Dedicated + and AFU directed. AFU may support one or both modes. + + When using dedicated mode only one MMU context is supported. In + this mode, only one userspace process can use the accelerator at + time. + + When using AFU directed mode, up to 16K simultaneous contexts can + be supported. This means up to 16K simultaneous userspace + applications may use the accelerator (although specific AFUs may + support fewer). In this mode, the AFU sends a 16 bit context ID + with each of its requests. This tells the PSL which context is + associated with each operation. If the PSL can't translate an + operation, the ID can also be accessed by the kernel so it can + determine the userspace context associated with an operation. + + +MMIO space +========== + + A portion of the accelerator MMIO space can be directly mapped + from the AFU to userspace. Either the whole space can be mapped or + just a per context portion. The hardware is self describing, hence + the kernel can determine the offset and size of the per context + portion. + + +Interrupts +========== + + AFUs may generate interrupts that are destined for userspace. These + are received by the kernel as hardware interrupts and passed onto + userspace by a read syscall documented below. + + Data storage faults and error interrupts are handled by the kernel + driver. + + +Work Element Descriptor (WED) +============================= + + The WED is a 64-bit parameter passed to the AFU when a context is + started. Its format is up to the AFU hence the kernel has no + knowledge of what it represents. Typically it will be the + effective address of a work queue or status block where the AFU + and userspace can share control and status information. + + + + +User API +======== + + For AFUs operating in AFU directed mode, two character device + files will be created. /dev/cxl/afu0.0m will correspond to a + master context and /dev/cxl/afu0.0s will correspond to a slave + context. Master contexts have access to the full MMIO space an + AFU provides. Slave contexts have access to only the per process + MMIO space an AFU provides. + + For AFUs operating in dedicated process mode, the driver will + only create a single character device per AFU called + /dev/cxl/afu0.0d. This will have access to the entire MMIO space + that the AFU provides (like master contexts in AFU directed). + + The types described below are defined in include/uapi/misc/cxl.h + + The following file operations are supported on both slave and + master devices. + + +open +---- + + Opens the device and allocates a file descriptor to be used with + the rest of the API. + + A dedicated mode AFU only has one context and only allows the + device to be opened once. + + An AFU directed mode AFU can have many contexts, the device can be + opened once for each context that is available. + + When all available contexts are allocated the open call will fail + and return -ENOSPC. + + Note: IRQs need to be allocated for each context, which may limit + the number of contexts that can be created, and therefore + how many times the device can be opened. The POWER8 CAPP + supports 2040 IRQs and 3 are used by the kernel, so 2037 are + left. If 1 IRQ is needed per context, then only 2037 + contexts can be allocated. If 4 IRQs are needed per context, + then only 2037/4 = 509 contexts can be allocated. + + +ioctl +----- + + CXL_IOCTL_START_WORK: + Starts the AFU context and associates it with the current + process. Once this ioctl is successfully executed, all memory + mapped into this process is accessible to this AFU context + using the same effective addresses. No additional calls are + required to map/unmap memory. The AFU memory context will be + updated as userspace allocates and frees memory. This ioctl + returns once the AFU context is started. + + Takes a pointer to a struct cxl_ioctl_start_work: + + struct cxl_ioctl_start_work { + __u64 flags; + __u64 work_element_descriptor; + __u64 amr; + __s16 num_interrupts; + __s16 reserved1; + __s32 reserved2; + __u64 reserved3; + __u64 reserved4; + __u64 reserved5; + __u64 reserved6; + }; + + flags: + Indicates which optional fields in the structure are + valid. + + work_element_descriptor: + The Work Element Descriptor (WED) is a 64-bit argument + defined by the AFU. Typically this is an effective + address pointing to an AFU specific structure + describing what work to perform. + + amr: + Authority Mask Register (AMR), same as the powerpc + AMR. This field is only used by the kernel when the + corresponding CXL_START_WORK_AMR value is specified in + flags. If not specified the kernel will use a default + value of 0. + + num_interrupts: + Number of userspace interrupts to request. This field + is only used by the kernel when the corresponding + CXL_START_WORK_NUM_IRQS value is specified in flags. + If not specified the minimum number required by the + AFU will be allocated. The min and max number can be + obtained from sysfs. + + reserved fields: + For ABI padding and future extensions + + CXL_IOCTL_GET_PROCESS_ELEMENT: + Get the current context id, also known as the process element. + The value is returned from the kernel as a __u32. + + +mmap +---- + + An AFU may have an MMIO space to facilitate communication with the + AFU. If it does, the MMIO space can be accessed via mmap. The size + and contents of this area are specific to the particular AFU. The + size can be discovered via sysfs. + + In AFU directed mode, master contexts are allowed to map all of + the MMIO space and slave contexts are allowed to only map the per + process MMIO space associated with the context. In dedicated + process mode the entire MMIO space can always be mapped. + + This mmap call must be done after the START_WORK ioctl. + + Care should be taken when accessing MMIO space. Only 32 and 64-bit + accesses are supported by POWER8. Also, the AFU will be designed + with a specific endianness, so all MMIO accesses should consider + endianness (recommend endian(3) variants like: le64toh(), + be64toh() etc). These endian issues equally apply to shared memory + queues the WED may describe. + + +read +---- + + Reads events from the AFU. Blocks if no events are pending + (unless O_NONBLOCK is supplied). Returns -EIO in the case of an + unrecoverable error or if the card is removed. + + read() will always return an integral number of events. + + The buffer passed to read() must be at least 4K bytes. + + The result of the read will be a buffer of one or more events, + each event is of type struct cxl_event, of varying size. + + struct cxl_event { + struct cxl_event_header header; + union { + struct cxl_event_afu_interrupt irq; + struct cxl_event_data_storage fault; + struct cxl_event_afu_error afu_error; + }; + }; + + The struct cxl_event_header is defined as: + + struct cxl_event_header { + __u16 type; + __u16 size; + __u16 process_element; + __u16 reserved1; + }; + + type: + This defines the type of event. The type determines how + the rest of the event is structured. These types are + described below and defined by enum cxl_event_type. + + size: + This is the size of the event in bytes including the + struct cxl_event_header. The start of the next event can + be found at this offset from the start of the current + event. + + process_element: + Context ID of the event. + + reserved field: + For future extensions and padding. + + If the event type is CXL_EVENT_AFU_INTERRUPT then the event + structure is defined as: + + struct cxl_event_afu_interrupt { + __u16 flags; + __u16 irq; /* Raised AFU interrupt number */ + __u32 reserved1; + }; + + flags: + These flags indicate which optional fields are present + in this struct. Currently all fields are mandatory. + + irq: + The IRQ number sent by the AFU. + + reserved field: + For future extensions and padding. + + If the event type is CXL_EVENT_DATA_STORAGE then the event + structure is defined as: + + struct cxl_event_data_storage { + __u16 flags; + __u16 reserved1; + __u32 reserved2; + __u64 addr; + __u64 dsisr; + __u64 reserved3; + }; + + flags: + These flags indicate which optional fields are present in + this struct. Currently all fields are mandatory. + + address: + The address that the AFU unsuccessfully attempted to + access. Valid accesses will be handled transparently by the + kernel but invalid accesses will generate this event. + + dsisr: + This field gives information on the type of fault. It is a + copy of the DSISR from the PSL hardware when the address + fault occurred. The form of the DSISR is as defined in the + CAIA. + + reserved fields: + For future extensions + + If the event type is CXL_EVENT_AFU_ERROR then the event structure + is defined as: + + struct cxl_event_afu_error { + __u16 flags; + __u16 reserved1; + __u32 reserved2; + __u64 error; + }; + + flags: + These flags indicate which optional fields are present in + this struct. Currently all fields are Mandatory. + + error: + Error status from the AFU. Defined by the AFU. + + reserved fields: + For future extensions and padding + +Sysfs Class +=========== + + A cxl sysfs class is added under /sys/class/cxl to facilitate + enumeration and tuning of the accelerators. Its layout is + described in Documentation/ABI/testing/sysfs-class-cxl + +Udev rules +========== + + The following udev rules could be used to create a symlink to the + most logical chardev to use in any programming mode (afuX.Yd for + dedicated, afuX.Ys for afu directed), since the API is virtually + identical for each: + + SUBSYSTEM=="cxl", ATTRS{mode}=="dedicated_process", SYMLINK="cxl/%b" + SUBSYSTEM=="cxl", ATTRS{mode}=="afu_directed", \ + KERNEL=="afu[0-9]*.[0-9]*s", SYMLINK="cxl/%b"
diff --git a/Documentation/prctl/.gitignore b/Documentation/prctl/.gitignore new file mode 100644 index 0000000..0b5c274 --- /dev/null +++ b/Documentation/prctl/.gitignore
@@ -0,0 +1,3 @@ +disable-tsc-ctxt-sw-stress-test +disable-tsc-on-off-stress-test +disable-tsc-test
diff --git a/Documentation/prctl/Makefile b/Documentation/prctl/Makefile new file mode 100644 index 0000000..2948b7b --- /dev/null +++ b/Documentation/prctl/Makefile
@@ -0,0 +1,8 @@ +# List of programs to build +hostprogs-$(CONFIG_X86) := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_disable-tsc-ctxt-sw-stress-test.o += -I$(objtree)/usr/include +HOSTCFLAGS_disable-tsc-on-off-stress-test.o += -I$(objtree)/usr/include +HOSTCFLAGS_disable-tsc-test.o += -I$(objtree)/usr/include
diff --git a/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c b/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c index f8e8e95..81fdd42 100644 --- a/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c +++ b/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c
@@ -27,19 +27,20 @@ # define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */ #endif -uint64_t rdtsc() { +static uint64_t rdtsc(void) +{ uint32_t lo, hi; /* We cannot use "=A", since this would use %rax on x86_64 */ __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi)); return (uint64_t)hi << 32 | lo; } -void sigsegv_expect(int sig) +static void sigsegv_expect(int sig) { /* */ } -void segvtask(void) +static void segvtask(void) { if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0) { @@ -54,13 +55,13 @@ } -void sigsegv_fail(int sig) +static void sigsegv_fail(int sig) { fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n"); exit(0); } -void rdtsctask(void) +static void rdtsctask(void) { if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0) {
diff --git a/Documentation/prctl/disable-tsc-on-off-stress-test.c b/Documentation/prctl/disable-tsc-on-off-stress-test.c index 1fcd9144..4d83a27 100644 --- a/Documentation/prctl/disable-tsc-on-off-stress-test.c +++ b/Documentation/prctl/disable-tsc-on-off-stress-test.c
@@ -29,7 +29,8 @@ /* snippet from wikipedia :-) */ -uint64_t rdtsc() { +static uint64_t rdtsc(void) +{ uint32_t lo, hi; /* We cannot use "=A", since this would use %rax on x86_64 */ __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi)); @@ -38,7 +39,7 @@ int should_segv = 0; -void sigsegv_cb(int sig) +static void sigsegv_cb(int sig) { if (!should_segv) { @@ -55,7 +56,7 @@ rdtsc(); } -void task(void) +static void task(void) { signal(SIGSEGV, sigsegv_cb); alarm(10);
diff --git a/Documentation/prctl/disable-tsc-test.c b/Documentation/prctl/disable-tsc-test.c index 843c81e..2541e65 100644 --- a/Documentation/prctl/disable-tsc-test.c +++ b/Documentation/prctl/disable-tsc-test.c
@@ -29,14 +29,15 @@ [PR_TSC_SIGSEGV] = "PR_TSC_SIGSEGV", }; -uint64_t rdtsc() { +static uint64_t rdtsc(void) +{ uint32_t lo, hi; /* We cannot use "=A", since this would use %rax on x86_64 */ __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi)); return (uint64_t)hi << 32 | lo; } -void sigsegv_cb(int sig) +static void sigsegv_cb(int sig) { int tsc_val = 0;
diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index b449821..5a615c1 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt
@@ -70,6 +70,38 @@ For printing a dma_addr_t type which can vary based on build options, regardless of the width of the CPU data path. Passed by reference. +Raw buffer as an escaped string: + + %*pE[achnops] + + For printing raw buffer as an escaped string. For the following buffer + + 1b 62 20 5c 43 07 22 90 0d 5d + + few examples show how the conversion would be done (the result string + without surrounding quotes): + + %*pE "\eb \C\a"\220\r]" + %*pEhp "\x1bb \C\x07"\x90\x0d]" + %*pEa "\e\142\040\\\103\a\042\220\r\135" + + The conversion rules are applied according to an optional combination + of flags (see string_escape_mem() kernel documentation for the + details): + a - ESCAPE_ANY + c - ESCAPE_SPECIAL + h - ESCAPE_HEX + n - ESCAPE_NULL + o - ESCAPE_OCTAL + p - ESCAPE_NP + s - ESCAPE_SPACE + By default ESCAPE_ANY_NP is used. + + ESCAPE_ANY_NP is the sane choice for many cases, in particularly for + printing SSIDs. + + If field width is omitted the 1 byte only will be escaped. + Raw buffer as a hex string: %*ph 00 01 02 ... 3f %*phC 00:01:02: ... :3f
diff --git a/Documentation/ptp/.gitignore b/Documentation/ptp/.gitignore new file mode 100644 index 0000000..f562e49 --- /dev/null +++ b/Documentation/ptp/.gitignore
@@ -0,0 +1 @@ +testptp
diff --git a/Documentation/ptp/Makefile b/Documentation/ptp/Makefile new file mode 100644 index 0000000..293d6c0 --- /dev/null +++ b/Documentation/ptp/Makefile
@@ -0,0 +1,8 @@ +# List of programs to build +hostprogs-y := testptp + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_testptp.o += -I$(objtree)/usr/include +HOSTLOADLIBES_testptp := -lrt
diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c index ba1d502..2bc8abc 100644 --- a/Documentation/ptp/testptp.c +++ b/Documentation/ptp/testptp.c
@@ -500,11 +500,11 @@ interval = t2 - t1; offset = (t2 + t1) / 2 - tp; - printf("system time: %" PRId64 ".%u\n", + printf("system time: %lld.%u\n", (pct+2*i)->sec, (pct+2*i)->nsec); - printf("phc time: %" PRId64 ".%u\n", + printf("phc time: %lld.%u\n", (pct+2*i+1)->sec, (pct+2*i+1)->nsec); - printf("system time: %" PRId64 ".%u\n", + printf("system time: %lld.%u\n", (pct+2*i+2)->sec, (pct+2*i+2)->nsec); printf("system/phc clock time offset is %" PRId64 " ns\n" "system clock time delay is %" PRId64 " ns\n",
diff --git a/Documentation/scheduler/sched-deadline.txt b/Documentation/scheduler/sched-deadline.txt index 18adc92..21461a0 100644 --- a/Documentation/scheduler/sched-deadline.txt +++ b/Documentation/scheduler/sched-deadline.txt
@@ -15,6 +15,8 @@ 5. Tasks CPU affinity 5.1 SCHED_DEADLINE and cpusets HOWTO 6. Future plans + A. Test suite + B. Minimal main() 0. WARNING @@ -38,24 +40,25 @@ ================== SCHED_DEADLINE uses three parameters, named "runtime", "period", and - "deadline" to schedule tasks. A SCHED_DEADLINE task is guaranteed to receive + "deadline", to schedule tasks. A SCHED_DEADLINE task should receive "runtime" microseconds of execution time every "period" microseconds, and these "runtime" microseconds are available within "deadline" microseconds from the beginning of the period. In order to implement this behaviour, every time the task wakes up, the scheduler computes a "scheduling deadline" consistent with the guarantee (using the CBS[2,3] algorithm). Tasks are then scheduled using EDF[1] on these scheduling deadlines (the task with the - smallest scheduling deadline is selected for execution). Notice that this - guaranteed is respected if a proper "admission control" strategy (see Section - "4. Bandwidth management") is used. + earliest scheduling deadline is selected for execution). Notice that the + task actually receives "runtime" time units within "deadline" if a proper + "admission control" strategy (see Section "4. Bandwidth management") is used + (clearly, if the system is overloaded this guarantee cannot be respected). Summing up, the CBS[2,3] algorithms assigns scheduling deadlines to tasks so that each task runs for at most its runtime every period, avoiding any interference between different tasks (bandwidth isolation), while the EDF[1] - algorithm selects the task with the smallest scheduling deadline as the one - to be executed first. Thanks to this feature, also tasks that do not - strictly comply with the "traditional" real-time task model (see Section 3) - can effectively use the new policy. + algorithm selects the task with the earliest scheduling deadline as the one + to be executed next. Thanks to this feature, tasks that do not strictly comply + with the "traditional" real-time task model (see Section 3) can effectively + use the new policy. In more details, the CBS algorithm assigns scheduling deadlines to tasks in the following way: @@ -64,45 +67,45 @@ "deadline", and "period" parameters; - The state of the task is described by a "scheduling deadline", and - a "current runtime". These two parameters are initially set to 0; + a "remaining runtime". These two parameters are initially set to 0; - When a SCHED_DEADLINE task wakes up (becomes ready for execution), the scheduler checks if - current runtime runtime - ---------------------------------- > ---------------- - scheduling deadline - current time period + remaining runtime runtime + ---------------------------------- > --------- + scheduling deadline - current time period then, if the scheduling deadline is smaller than the current time, or this condition is verified, the scheduling deadline and the - current budget are re-initialised as + remaining runtime are re-initialised as scheduling deadline = current time + deadline - current runtime = runtime + remaining runtime = runtime - otherwise, the scheduling deadline and the current runtime are + otherwise, the scheduling deadline and the remaining runtime are left unchanged; - When a SCHED_DEADLINE task executes for an amount of time t, its - current runtime is decreased as + remaining runtime is decreased as - current runtime = current runtime - t + remaining runtime = remaining runtime - t (technically, the runtime is decreased at every tick, or when the task is descheduled / preempted); - - When the current runtime becomes less or equal than 0, the task is + - When the remaining runtime becomes less or equal than 0, the task is said to be "throttled" (also known as "depleted" in real-time literature) and cannot be scheduled until its scheduling deadline. The "replenishment time" for this task (see next item) is set to be equal to the current value of the scheduling deadline; - When the current time is equal to the replenishment time of a - throttled task, the scheduling deadline and the current runtime are + throttled task, the scheduling deadline and the remaining runtime are updated as scheduling deadline = scheduling deadline + period - current runtime = current runtime + runtime + remaining runtime = remaining runtime + runtime 3. Scheduling Real-Time Tasks @@ -134,6 +137,50 @@ A real-time task can be periodic with period P if r_{j+1} = r_j + P, or sporadic with minimum inter-arrival time P is r_{j+1} >= r_j + P. Finally, d_j = r_j + D, where D is the task's relative deadline. + The utilisation of a real-time task is defined as the ratio between its + WCET and its period (or minimum inter-arrival time), and represents + the fraction of CPU time needed to execute the task. + + If the total utilisation sum_i(WCET_i/P_i) is larger than M (with M equal + to the number of CPUs), then the scheduler is unable to respect all the + deadlines. + Note that total utilisation is defined as the sum of the utilisations + WCET_i/P_i over all the real-time tasks in the system. When considering + multiple real-time tasks, the parameters of the i-th task are indicated + with the "_i" suffix. + Moreover, if the total utilisation is larger than M, then we risk starving + non- real-time tasks by real-time tasks. + If, instead, the total utilisation is smaller than M, then non real-time + tasks will not be starved and the system might be able to respect all the + deadlines. + As a matter of fact, in this case it is possible to provide an upper bound + for tardiness (defined as the maximum between 0 and the difference + between the finishing time of a job and its absolute deadline). + More precisely, it can be proven that using a global EDF scheduler the + maximum tardiness of each task is smaller or equal than + ((M − 1) · WCET_max − WCET_min)/(M − (M − 2) · U_max) + WCET_max + where WCET_max = max_i{WCET_i} is the maximum WCET, WCET_min=min_i{WCET_i} + is the minimum WCET, and U_max = max_i{WCET_i/P_i} is the maximum utilisation. + + If M=1 (uniprocessor system), or in case of partitioned scheduling (each + real-time task is statically assigned to one and only one CPU), it is + possible to formally check if all the deadlines are respected. + If D_i = P_i for all tasks, then EDF is able to respect all the deadlines + of all the tasks executing on a CPU if and only if the total utilisation + of the tasks running on such a CPU is smaller or equal than 1. + If D_i != P_i for some task, then it is possible to define the density of + a task as C_i/min{D_i,T_i}, and EDF is able to respect all the deadlines + of all the tasks running on a CPU if the sum sum_i C_i/min{D_i,T_i} of the + densities of the tasks running on such a CPU is smaller or equal than 1 + (notice that this condition is only sufficient, and not necessary). + + On multiprocessor systems with global EDF scheduling (non partitioned + systems), a sufficient test for schedulability can not be based on the + utilisations (it can be shown that task sets with utilisations slightly + larger than 1 can miss deadlines regardless of the number of CPUs M). + However, as previously stated, enforcing that the total utilisation is smaller + than M is enough to guarantee that non real-time tasks are not starved and + that the tardiness of real-time tasks has an upper bound. SCHED_DEADLINE can be used to schedule real-time tasks guaranteeing that the jobs' deadlines of a task are respected. In order to do this, a task @@ -147,6 +194,8 @@ and the absolute deadlines (d_j) coincide, so a proper admission control allows to respect the jobs' absolute deadlines for this task (this is what is called "hard schedulability property" and is an extension of Lemma 1 of [2]). + Notice that if runtime > deadline the admission control will surely reject + this task, as it is not possible to respect its temporal constraints. References: 1 - C. L. Liu and J. W. Layland. Scheduling algorithms for multiprogram- @@ -156,46 +205,57 @@ Real-Time Systems. Proceedings of the 19th IEEE Real-time Systems Symposium, 1998. http://retis.sssup.it/~giorgio/paps/1998/rtss98-cbs.pdf 3 - L. Abeni. Server Mechanisms for Multimedia Applications. ReTiS Lab - Technical Report. http://xoomer.virgilio.it/lucabe72/pubs/tr-98-01.ps + Technical Report. http://disi.unitn.it/~abeni/tr-98-01.pdf 4. Bandwidth management ======================= - In order for the -deadline scheduling to be effective and useful, it is - important to have some method to keep the allocation of the available CPU - bandwidth to the tasks under control. - This is usually called "admission control" and if it is not performed at all, + As previously mentioned, in order for -deadline scheduling to be + effective and useful (that is, to be able to provide "runtime" time units + within "deadline"), it is important to have some method to keep the allocation + of the available fractions of CPU time to the various tasks under control. + This is usually called "admission control" and if it is not performed, then no guarantee can be given on the actual scheduling of the -deadline tasks. - Since when RT-throttling has been introduced each task group has a bandwidth - associated, calculated as a certain amount of runtime over a period. - Moreover, to make it possible to manipulate such bandwidth, readable/writable - controls have been added to both procfs (for system wide settings) and cgroupfs - (for per-group settings). - Therefore, the same interface is being used for controlling the bandwidth - distrubution to -deadline tasks. + As already stated in Section 3, a necessary condition to be respected to + correctly schedule a set of real-time tasks is that the total utilisation + is smaller than M. When talking about -deadline tasks, this requires that + the sum of the ratio between runtime and period for all tasks is smaller + than M. Notice that the ratio runtime/period is equivalent to the utilisation + of a "traditional" real-time task, and is also often referred to as + "bandwidth". + The interface used to control the CPU bandwidth that can be allocated + to -deadline tasks is similar to the one already used for -rt + tasks with real-time group scheduling (a.k.a. RT-throttling - see + Documentation/scheduler/sched-rt-group.txt), and is based on readable/ + writable control files located in procfs (for system wide settings). + Notice that per-group settings (controlled through cgroupfs) are still not + defined for -deadline tasks, because more discussion is needed in order to + figure out how we want to manage SCHED_DEADLINE bandwidth at the task group + level. - However, more discussion is needed in order to figure out how we want to manage - SCHED_DEADLINE bandwidth at the task group level. Therefore, SCHED_DEADLINE - uses (for now) a less sophisticated, but actually very sensible, mechanism to - ensure that a certain utilization cap is not overcome per each root_domain. - - Another main difference between deadline bandwidth management and RT-throttling + A main difference between deadline bandwidth management and RT-throttling is that -deadline tasks have bandwidth on their own (while -rt ones don't!), - and thus we don't need an higher level throttling mechanism to enforce the - desired bandwidth. + and thus we don't need a higher level throttling mechanism to enforce the + desired bandwidth. In other words, this means that interface parameters are + only used at admission control time (i.e., when the user calls + sched_setattr()). Scheduling is then performed considering actual tasks' + parameters, so that CPU bandwidth is allocated to SCHED_DEADLINE tasks + respecting their needs in terms of granularity. Therefore, using this simple + interface we can put a cap on total utilization of -deadline tasks (i.e., + \Sum (runtime_i / period_i) < global_dl_utilization_cap). 4.1 System wide settings ------------------------ The system wide settings are configured under the /proc virtual file system. - For now the -rt knobs are used for dl admission control and the -deadline - runtime is accounted against the -rt runtime. We realise that this isn't - entirely desirable; however, it is better to have a small interface for now, - and be able to change it easily later. The ideal situation (see 5.) is to run - -rt tasks from a -deadline server; in which case the -rt bandwidth is a direct - subset of dl_bw. + For now the -rt knobs are used for -deadline admission control and the + -deadline runtime is accounted against the -rt runtime. We realise that this + isn't entirely desirable; however, it is better to have a small interface for + now, and be able to change it easily later. The ideal situation (see 5.) is to + run -rt tasks from a -deadline server; in which case the -rt bandwidth is a + direct subset of dl_bw. This means that, for a root_domain comprising M CPUs, -deadline tasks can be created while the sum of their bandwidths stays below: @@ -231,8 +291,16 @@ 950000. With rt_period equal to 1000000, by default, it means that -deadline tasks can use at most 95%, multiplied by the number of CPUs that compose the root_domain, for each root_domain. + This means that non -deadline tasks will receive at least 5% of the CPU time, + and that -deadline tasks will receive their runtime with a guaranteed + worst-case delay respect to the "deadline" parameter. If "deadline" = "period" + and the cpuset mechanism is used to implement partitioned scheduling (see + Section 5), then this simple setting of the bandwidth management is able to + deterministically guarantee that -deadline tasks will receive their runtime + in a period. - A -deadline task cannot fork. + Finally, notice that in order not to jeopardize the admission control a + -deadline task cannot fork. 5. Tasks CPU affinity ===================== @@ -279,3 +347,179 @@ throttling patches [https://lkml.org/lkml/2010/2/23/239] but we still are in the preliminary phases of the merge and we really seek feedback that would help us decide on the direction it should take. + +Appendix A. Test suite +====================== + + The SCHED_DEADLINE policy can be easily tested using two applications that + are part of a wider Linux Scheduler validation suite. The suite is + available as a GitHub repository: https://github.com/scheduler-tools. + + The first testing application is called rt-app and can be used to + start multiple threads with specific parameters. rt-app supports + SCHED_{OTHER,FIFO,RR,DEADLINE} scheduling policies and their related + parameters (e.g., niceness, priority, runtime/deadline/period). rt-app + is a valuable tool, as it can be used to synthetically recreate certain + workloads (maybe mimicking real use-cases) and evaluate how the scheduler + behaves under such workloads. In this way, results are easily reproducible. + rt-app is available at: https://github.com/scheduler-tools/rt-app. + + Thread parameters can be specified from the command line, with something like + this: + + # rt-app -t 100000:10000:d -t 150000:20000:f:10 -D5 + + The above creates 2 threads. The first one, scheduled by SCHED_DEADLINE, + executes for 10ms every 100ms. The second one, scheduled at SCHED_FIFO + priority 10, executes for 20ms every 150ms. The test will run for a total + of 5 seconds. + + More interestingly, configurations can be described with a json file that + can be passed as input to rt-app with something like this: + + # rt-app my_config.json + + The parameters that can be specified with the second method are a superset + of the command line options. Please refer to rt-app documentation for more + details (<rt-app-sources>/doc/*.json). + + The second testing application is a modification of schedtool, called + schedtool-dl, which can be used to setup SCHED_DEADLINE parameters for a + certain pid/application. schedtool-dl is available at: + https://github.com/scheduler-tools/schedtool-dl.git. + + The usage is straightforward: + + # schedtool -E -t 10000000:100000000 -e ./my_cpuhog_app + + With this, my_cpuhog_app is put to run inside a SCHED_DEADLINE reservation + of 10ms every 100ms (note that parameters are expressed in microseconds). + You can also use schedtool to create a reservation for an already running + application, given that you know its pid: + + # schedtool -E -t 10000000:100000000 my_app_pid + +Appendix B. Minimal main() +========================== + + We provide in what follows a simple (ugly) self-contained code snippet + showing how SCHED_DEADLINE reservations can be created by a real-time + application developer. + + #define _GNU_SOURCE + #include <unistd.h> + #include <stdio.h> + #include <stdlib.h> + #include <string.h> + #include <time.h> + #include <linux/unistd.h> + #include <linux/kernel.h> + #include <linux/types.h> + #include <sys/syscall.h> + #include <pthread.h> + + #define gettid() syscall(__NR_gettid) + + #define SCHED_DEADLINE 6 + + /* XXX use the proper syscall numbers */ + #ifdef __x86_64__ + #define __NR_sched_setattr 314 + #define __NR_sched_getattr 315 + #endif + + #ifdef __i386__ + #define __NR_sched_setattr 351 + #define __NR_sched_getattr 352 + #endif + + #ifdef __arm__ + #define __NR_sched_setattr 380 + #define __NR_sched_getattr 381 + #endif + + static volatile int done; + + struct sched_attr { + __u32 size; + + __u32 sched_policy; + __u64 sched_flags; + + /* SCHED_NORMAL, SCHED_BATCH */ + __s32 sched_nice; + + /* SCHED_FIFO, SCHED_RR */ + __u32 sched_priority; + + /* SCHED_DEADLINE (nsec) */ + __u64 sched_runtime; + __u64 sched_deadline; + __u64 sched_period; + }; + + int sched_setattr(pid_t pid, + const struct sched_attr *attr, + unsigned int flags) + { + return syscall(__NR_sched_setattr, pid, attr, flags); + } + + int sched_getattr(pid_t pid, + struct sched_attr *attr, + unsigned int size, + unsigned int flags) + { + return syscall(__NR_sched_getattr, pid, attr, size, flags); + } + + void *run_deadline(void *data) + { + struct sched_attr attr; + int x = 0; + int ret; + unsigned int flags = 0; + + printf("deadline thread started [%ld]\n", gettid()); + + attr.size = sizeof(attr); + attr.sched_flags = 0; + attr.sched_nice = 0; + attr.sched_priority = 0; + + /* This creates a 10ms/30ms reservation */ + attr.sched_policy = SCHED_DEADLINE; + attr.sched_runtime = 10 * 1000 * 1000; + attr.sched_period = attr.sched_deadline = 30 * 1000 * 1000; + + ret = sched_setattr(0, &attr, flags); + if (ret < 0) { + done = 0; + perror("sched_setattr"); + exit(-1); + } + + while (!done) { + x++; + } + + printf("deadline thread dies [%ld]\n", gettid()); + return NULL; + } + + int main (int argc, char **argv) + { + pthread_t thread; + + printf("main thread [%ld]\n", gettid()); + + pthread_create(&thread, NULL, run_deadline, NULL); + + sleep(10); + + done = 1; + pthread_join(thread, NULL); + + printf("main dies [%ld]\n", gettid()); + return 0; + }
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 91ba58e..18b5709 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,17 @@ +Release Date : Thu. Jun 19, 2014 17:00:00 PST 2014 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford + Kashyap Desai + Sumit Saxena + Uday Lingala +Current Version : 06.803.02.00-rc1 +Old Version : 06.803.01.00-rc1 + 1. Fix reset_mutex leak in megasas_reset_fusion(). + 2. Remove unused variables in megasas_instance. + 3. Fix LD/VF affiliation parsing. + 4. Add missing initial call to megasas_get_ld_vf_affiliation(). + 5. Version and Changelog update. +------------------------------------------------------------------------------- Release Date : Mon. Mar 10, 2014 17:00:00 PST 2014 - (emaild-id:megaraidlinux@lsi.com) Adam Radford
diff --git a/Documentation/scsi/osd.txt b/Documentation/scsi/osd.txt index da162f7..5a9879b 100644 --- a/Documentation/scsi/osd.txt +++ b/Documentation/scsi/osd.txt
@@ -184,8 +184,7 @@ More up-to-date information can be found on: http://open-osd.org -Boaz Harrosh <bharrosh@panasas.com> -Benny Halevy <bhalevy@panasas.com> +Boaz Harrosh <ooo@electrozaur.com> References ==========
diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 8727c19..821c936 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt
@@ -888,11 +888,11 @@ const char *callout_info); This is used to request a key or keyring with a description that matches - the description specified according to the key type's match function. This - permits approximate matching to occur. If callout_string is not NULL, then - /sbin/request-key will be invoked in an attempt to obtain the key from - userspace. In that case, callout_string will be passed as an argument to - the program. + the description specified according to the key type's match_preparse() + method. This permits approximate matching to occur. If callout_string is + not NULL, then /sbin/request-key will be invoked in an attempt to obtain + the key from userspace. In that case, callout_string will be passed as an + argument to the program. Should the function fail error ENOKEY, EKEYEXPIRED or EKEYREVOKED will be returned. @@ -1170,7 +1170,7 @@ The method should return 0 if successful or a negative error code otherwise. - + (*) void (*free_preparse)(struct key_preparsed_payload *prep); This method is only required if the preparse() method is provided, @@ -1225,16 +1225,55 @@ It is safe to sleep in this method. - (*) int (*match)(const struct key *key, const void *desc); + (*) int (*match_preparse)(struct key_match_data *match_data); - This method is called to match a key against a description. It should - return non-zero if the two match, zero if they don't. + This method is optional. It is called when a key search is about to be + performed. It is given the following structure: - This method should not need to lock the key in any way. The type and - description can be considered invariant, and the payload should not be - accessed (the key may not yet be instantiated). + struct key_match_data { + bool (*cmp)(const struct key *key, + const struct key_match_data *match_data); + const void *raw_data; + void *preparsed; + unsigned lookup_type; + }; - It is not safe to sleep in this method; the caller may hold spinlocks. + On entry, raw_data will be pointing to the criteria to be used in matching + a key by the caller and should not be modified. (*cmp)() will be pointing + to the default matcher function (which does an exact description match + against raw_data) and lookup_type will be set to indicate a direct lookup. + + The following lookup_type values are available: + + [*] KEYRING_SEARCH_LOOKUP_DIRECT - A direct lookup hashes the type and + description to narrow down the search to a small number of keys. + + [*] KEYRING_SEARCH_LOOKUP_ITERATE - An iterative lookup walks all the + keys in the keyring until one is matched. This must be used for any + search that's not doing a simple direct match on the key description. + + The method may set cmp to point to a function of its choice that does some + other form of match, may set lookup_type to KEYRING_SEARCH_LOOKUP_ITERATE + and may attach something to the preparsed pointer for use by (*cmp)(). + (*cmp)() should return true if a key matches and false otherwise. + + If preparsed is set, it may be necessary to use the match_free() method to + clean it up. + + The method should return 0 if successful or a negative error code + otherwise. + + It is permitted to sleep in this method, but (*cmp)() may not sleep as + locks will be held over it. + + If match_preparse() is not provided, keys of this type will be matched + exactly by their description. + + + (*) void (*match_free)(struct key_match_data *match_data); + + This method is optional. If given, it called to clean up + match_data->preparsed after a successful call to match_preparse(). (*) void (*revoke)(struct key *key);
diff --git a/Documentation/serial/driver b/Documentation/serial/driver index 3bba1ae..ba64e4b 100644 --- a/Documentation/serial/driver +++ b/Documentation/serial/driver
@@ -140,6 +140,8 @@ will append the character to the circular buffer and then call start_tx() / stop_tx() to flush the data out. + Do not transmit if ch == '\0' (__DISABLED_CHAR). + Locking: none. Interrupts: caller dependent.
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt index 41c8378..39dac95 100644 --- a/Documentation/serial/serial-rs485.txt +++ b/Documentation/serial/serial-rs485.txt
@@ -132,5 +132,5 @@ 5. REFERENCES - [1] include/linux/serial.h + [1] include/uapi/linux/serial.h [2] Documentation/devicetree/bindings/serial/rs485.txt
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt index 540db41..1e52d67 100644 --- a/Documentation/serial/tty.txt +++ b/Documentation/serial/tty.txt
@@ -146,7 +146,7 @@ driver function is responsible for modifying any bits in the request it cannot fulfill to indicate the actual modes being used. A device with no - hardware capability for change (eg a USB dongle or + hardware capability for change (e.g. a USB dongle or virtual port) can provide NULL for this method. throttle() Notify the tty driver that input buffers for the @@ -258,7 +258,7 @@ flush_chars() - Ask the kernel to write put_char queue -write_room() - Return the number of characters tht can be stuffed +write_room() - Return the number of characters that can be stuffed into the port buffers without overflow (or less). The ldisc is responsible for being intelligent about multi-threading of write_room/write calls
diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile index a5b03c8..efa2558 100644 --- a/Documentation/spi/Makefile +++ b/Documentation/spi/Makefile
@@ -1,6 +1,3 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - # List of programs to build hostprogs-y := spidev_test spidev_fdx
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 7982bcc..d29734b 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary
@@ -601,13 +601,13 @@ Contributors to Linux-SPI discussions include (in alphabetical order, by last name): +Mark Brown David Brownell Russell King +Grant Likely Dmitry Pervushin Stephen Street Mark Underwood Andrew Victor -Vitaly Wool -Grant Likely -Mark Brown Linus Walleij +Vitaly Wool
diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt deleted file mode 100644 index 97eaf57..0000000 --- a/Documentation/spinlocks.txt +++ /dev/null
@@ -1,167 +0,0 @@ -Lesson 1: Spin locks - -The most basic primitive for locking is spinlock. - -static DEFINE_SPINLOCK(xxx_lock); - - unsigned long flags; - - spin_lock_irqsave(&xxx_lock, flags); - ... critical section here .. - spin_unlock_irqrestore(&xxx_lock, flags); - -The above is always safe. It will disable interrupts _locally_, but the -spinlock itself will guarantee the global lock, so it will guarantee that -there is only one thread-of-control within the region(s) protected by that -lock. This works well even under UP also, so the code does _not_ need to -worry about UP vs SMP issues: the spinlocks work correctly under both. - - NOTE! Implications of spin_locks for memory are further described in: - - Documentation/memory-barriers.txt - (5) LOCK operations. - (6) UNLOCK operations. - -The above is usually pretty simple (you usually need and want only one -spinlock for most things - using more than one spinlock can make things a -lot more complex and even slower and is usually worth it only for -sequences that you _know_ need to be split up: avoid it at all cost if you -aren't sure). - -This is really the only really hard part about spinlocks: once you start -using spinlocks they tend to expand to areas you might not have noticed -before, because you have to make sure the spinlocks correctly protect the -shared data structures _everywhere_ they are used. The spinlocks are most -easily added to places that are completely independent of other code (for -example, internal driver data structures that nobody else ever touches). - - NOTE! The spin-lock is safe only when you _also_ use the lock itself - to do locking across CPU's, which implies that EVERYTHING that - touches a shared variable has to agree about the spinlock they want - to use. - ----- - -Lesson 2: reader-writer spinlocks. - -If your data accesses have a very natural pattern where you usually tend -to mostly read from the shared variables, the reader-writer locks -(rw_lock) versions of the spinlocks are sometimes useful. They allow multiple -readers to be in the same critical region at once, but if somebody wants -to change the variables it has to get an exclusive write lock. - - NOTE! reader-writer locks require more atomic memory operations than - simple spinlocks. Unless the reader critical section is long, you - are better off just using spinlocks. - -The routines look the same as above: - - rwlock_t xxx_lock = __RW_LOCK_UNLOCKED(xxx_lock); - - unsigned long flags; - - read_lock_irqsave(&xxx_lock, flags); - .. critical section that only reads the info ... - read_unlock_irqrestore(&xxx_lock, flags); - - write_lock_irqsave(&xxx_lock, flags); - .. read and write exclusive access to the info ... - write_unlock_irqrestore(&xxx_lock, flags); - -The above kind of lock may be useful for complex data structures like -linked lists, especially searching for entries without changing the list -itself. The read lock allows many concurrent readers. Anything that -_changes_ the list will have to get the write lock. - - NOTE! RCU is better for list traversal, but requires careful - attention to design detail (see Documentation/RCU/listRCU.txt). - -Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_ -time need to do any changes (even if you don't do it every time), you have -to get the write-lock at the very beginning. - - NOTE! We are working hard to remove reader-writer spinlocks in most - cases, so please don't add a new one without consensus. (Instead, see - Documentation/RCU/rcu.txt for complete information.) - ----- - -Lesson 3: spinlocks revisited. - -The single spin-lock primitives above are by no means the only ones. They -are the most safe ones, and the ones that work under all circumstances, -but partly _because_ they are safe they are also fairly slow. They are slower -than they'd need to be, because they do have to disable interrupts -(which is just a single instruction on a x86, but it's an expensive one - -and on other architectures it can be worse). - -If you have a case where you have to protect a data structure across -several CPU's and you want to use spinlocks you can potentially use -cheaper versions of the spinlocks. IFF you know that the spinlocks are -never used in interrupt handlers, you can use the non-irq versions: - - spin_lock(&lock); - ... - spin_unlock(&lock); - -(and the equivalent read-write versions too, of course). The spinlock will -guarantee the same kind of exclusive access, and it will be much faster. -This is useful if you know that the data in question is only ever -manipulated from a "process context", ie no interrupts involved. - -The reasons you mustn't use these versions if you have interrupts that -play with the spinlock is that you can get deadlocks: - - spin_lock(&lock); - ... - <- interrupt comes in: - spin_lock(&lock); - -where an interrupt tries to lock an already locked variable. This is ok if -the other interrupt happens on another CPU, but it is _not_ ok if the -interrupt happens on the same CPU that already holds the lock, because the -lock will obviously never be released (because the interrupt is waiting -for the lock, and the lock-holder is interrupted by the interrupt and will -not continue until the interrupt has been processed). - -(This is also the reason why the irq-versions of the spinlocks only need -to disable the _local_ interrupts - it's ok to use spinlocks in interrupts -on other CPU's, because an interrupt on another CPU doesn't interrupt the -CPU that holds the lock, so the lock-holder can continue and eventually -releases the lock). - -Note that you can be clever with read-write locks and interrupts. For -example, if you know that the interrupt only ever gets a read-lock, then -you can use a non-irq version of read locks everywhere - because they -don't block on each other (and thus there is no dead-lock wrt interrupts. -But when you do the write-lock, you have to use the irq-safe version. - -For an example of being clever with rw-locks, see the "waitqueue_lock" -handling in kernel/sched/core.c - nothing ever _changes_ a wait-queue from -within an interrupt, they only read the queue in order to know whom to -wake up. So read-locks are safe (which is good: they are very common -indeed), while write-locks need to protect themselves against interrupts. - - Linus - ----- - -Reference information: - -For dynamic initialization, use spin_lock_init() or rwlock_init() as -appropriate: - - spinlock_t xxx_lock; - rwlock_t xxx_rw_lock; - - static int __init xxx_init(void) - { - spin_lock_init(&xxx_lock); - rwlock_init(&xxx_rw_lock); - ... - } - - module_init(xxx_init); - -For static initialization, use DEFINE_SPINLOCK() / DEFINE_RWLOCK() or -__SPIN_LOCK_UNLOCKED() / __RW_LOCK_UNLOCKED() as appropriate.
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index f79eb96..57baff5 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt
@@ -190,6 +190,8 @@ %% output one '%' %p pid %P global pid (init PID namespace) + %i tid + %I global tid (init PID namespace) %u uid %g gid %d dump mode, matches PR_SET_DUMPABLE and
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 9a0319a..04892b8 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt
@@ -241,6 +241,9 @@ 6. TIPC ------------------------------------------------------- +tipc_rmem +---------- + The TIPC protocol now has a tunable for the receive memory, similar to the tcp_rmem - i.e. a vector of 3 INTEGERs: (min, default, max) @@ -252,3 +255,16 @@ are scaled (shifted) versions of that same value. Note that the min value is not at this point in time used in any meaningful way, but the triplet is preserved in order to be consistent with things like tcp_rmem. + +named_timeout +-------------- + +TIPC name table updates are distributed asynchronously in a cluster, without +any form of transaction handling. This means that different race scenarios are +possible. One such is that a name withdrawal sent out by one node and received +by another node may arrive after a second, overlapping name publication already +has been accepted from a third node, although the conflicting updates +originally may have been issued in the correct sequential order. +If named_timeout is nonzero, failed topology updates will be placed on a defer +queue until another event arrives that clears the error, or until the timeout +expires. Value is in milliseconds.
diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index a5f985e..ce60ffa 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt
@@ -161,3 +161,24 @@ the device that matches the expected subsystem. Depending on a specific position of a parent device or exposing relative paths using "../" to access the chain of parents is a bug in the application. + +- When reading and writing sysfs device attribute files, avoid dependency + on specific error codes wherever possible. This minimizes coupling to + the error handling implementation within the kernel. + + In general, failures to read or write sysfs device attributes shall + propagate errors wherever possible. Common errors include, but are not + limited to: + + -EIO: The read or store operation is not supported, typically returned by + the sysfs system itself if the read or store pointer is NULL. + + -ENXIO: The read or store operation failed + + Error codes will not be changed without good reason, and should a change + to error codes result in user-space breakage, it will be fixed, or the + the offending change will be reverted. + + Userspace applications can, however, expect the format and contents of + the attribute files to remain consistent in the absence of a version + attribute change in the context of a given attribute.
diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt new file mode 100644 index 0000000..5518465 --- /dev/null +++ b/Documentation/target/tcmu-design.txt
@@ -0,0 +1,378 @@ +Contents: + +1) TCM Userspace Design + a) Background + b) Benefits + c) Design constraints + d) Implementation overview + i. Mailbox + ii. Command ring + iii. Data Area + e) Device discovery + f) Device events + g) Other contingencies +2) Writing a user pass-through handler + a) Discovering and configuring TCMU uio devices + b) Waiting for events on the device(s) + c) Managing the command ring +3) Command filtering and pass_level +4) A final note + + +TCM Userspace Design +-------------------- + +TCM is another name for LIO, an in-kernel iSCSI target (server). +Existing TCM targets run in the kernel. TCMU (TCM in Userspace) +allows userspace programs to be written which act as iSCSI targets. +This document describes the design. + +The existing kernel provides modules for different SCSI transport +protocols. TCM also modularizes the data storage. There are existing +modules for file, block device, RAM or using another SCSI device as +storage. These are called "backstores" or "storage engines". These +built-in modules are implemented entirely as kernel code. + +Background: + +In addition to modularizing the transport protocol used for carrying +SCSI commands ("fabrics"), the Linux kernel target, LIO, also modularizes +the actual data storage as well. These are referred to as "backstores" +or "storage engines". The target comes with backstores that allow a +file, a block device, RAM, or another SCSI device to be used for the +local storage needed for the exported SCSI LUN. Like the rest of LIO, +these are implemented entirely as kernel code. + +These backstores cover the most common use cases, but not all. One new +use case that other non-kernel target solutions, such as tgt, are able +to support is using Gluster's GLFS or Ceph's RBD as a backstore. The +target then serves as a translator, allowing initiators to store data +in these non-traditional networked storage systems, while still only +using standard protocols themselves. + +If the target is a userspace process, supporting these is easy. tgt, +for example, needs only a small adapter module for each, because the +modules just use the available userspace libraries for RBD and GLFS. + +Adding support for these backstores in LIO is considerably more +difficult, because LIO is entirely kernel code. Instead of undertaking +the significant work to port the GLFS or RBD APIs and protocols to the +kernel, another approach is to create a userspace pass-through +backstore for LIO, "TCMU". + + +Benefits: + +In addition to allowing relatively easy support for RBD and GLFS, TCMU +will also allow easier development of new backstores. TCMU combines +with the LIO loopback fabric to become something similar to FUSE +(Filesystem in Userspace), but at the SCSI layer instead of the +filesystem layer. A SUSE, if you will. + +The disadvantage is there are more distinct components to configure, and +potentially to malfunction. This is unavoidable, but hopefully not +fatal if we're careful to keep things as simple as possible. + +Design constraints: + +- Good performance: high throughput, low latency +- Cleanly handle if userspace: + 1) never attaches + 2) hangs + 3) dies + 4) misbehaves +- Allow future flexibility in user & kernel implementations +- Be reasonably memory-efficient +- Simple to configure & run +- Simple to write a userspace backend + + +Implementation overview: + +The core of the TCMU interface is a memory region that is shared +between kernel and userspace. Within this region is: a control area +(mailbox); a lockless producer/consumer circular buffer for commands +to be passed up, and status returned; and an in/out data buffer area. + +TCMU uses the pre-existing UIO subsystem. UIO allows device driver +development in userspace, and this is conceptually very close to the +TCMU use case, except instead of a physical device, TCMU implements a +memory-mapped layout designed for SCSI commands. Using UIO also +benefits TCMU by handling device introspection (e.g. a way for +userspace to determine how large the shared region is) and signaling +mechanisms in both directions. + +There are no embedded pointers in the memory region. Everything is +expressed as an offset from the region's starting address. This allows +the ring to still work if the user process dies and is restarted with +the region mapped at a different virtual address. + +See target_core_user.h for the struct definitions. + +The Mailbox: + +The mailbox is always at the start of the shared memory region, and +contains a version, details about the starting offset and size of the +command ring, and head and tail pointers to be used by the kernel and +userspace (respectively) to put commands on the ring, and indicate +when the commands are completed. + +version - 1 (userspace should abort if otherwise) +flags - none yet defined. +cmdr_off - The offset of the start of the command ring from the start +of the memory region, to account for the mailbox size. +cmdr_size - The size of the command ring. This does *not* need to be a +power of two. +cmd_head - Modified by the kernel to indicate when a command has been +placed on the ring. +cmd_tail - Modified by userspace to indicate when it has completed +processing of a command. + +The Command Ring: + +Commands are placed on the ring by the kernel incrementing +mailbox.cmd_head by the size of the command, modulo cmdr_size, and +then signaling userspace via uio_event_notify(). Once the command is +completed, userspace updates mailbox.cmd_tail in the same way and +signals the kernel via a 4-byte write(). When cmd_head equals +cmd_tail, the ring is empty -- no commands are currently waiting to be +processed by userspace. + +TCMU commands start with a common header containing "len_op", a 32-bit +value that stores the length, as well as the opcode in the lowest +unused bits. Currently only two opcodes are defined, TCMU_OP_PAD and +TCMU_OP_CMD. When userspace encounters a command with PAD opcode, it +should skip ahead by the bytes in "length". (The kernel inserts PAD +entries to ensure each CMD entry fits contigously into the circular +buffer.) + +When userspace handles a CMD, it finds the SCSI CDB (Command Data +Block) via tcmu_cmd_entry.req.cdb_off. This is an offset from the +start of the overall shared memory region, not the entry. The data +in/out buffers are accessible via tht req.iov[] array. Note that +each iov.iov_base is also an offset from the start of the region. + +TCMU currently does not support BIDI operations. + +When completing a command, userspace sets rsp.scsi_status, and +rsp.sense_buffer if necessary. Userspace then increments +mailbox.cmd_tail by entry.hdr.length (mod cmdr_size) and signals the +kernel via the UIO method, a 4-byte write to the file descriptor. + +The Data Area: + +This is shared-memory space after the command ring. The organization +of this area is not defined in the TCMU interface, and userspace +should access only the parts referenced by pending iovs. + + +Device Discovery: + +Other devices may be using UIO besides TCMU. Unrelated user processes +may also be handling different sets of TCMU devices. TCMU userspace +processes must find their devices by scanning sysfs +class/uio/uio*/name. For TCMU devices, these names will be of the +format: + +tcm-user/<hba_num>/<device_name>/<subtype>/<path> + +where "tcm-user" is common for all TCMU-backed UIO devices. <hba_num> +and <device_name> allow userspace to find the device's path in the +kernel target's configfs tree. Assuming the usual mount point, it is +found at: + +/sys/kernel/config/target/core/user_<hba_num>/<device_name> + +This location contains attributes such as "hw_block_size", that +userspace needs to know for correct operation. + +<subtype> will be a userspace-process-unique string to identify the +TCMU device as expecting to be backed by a certain handler, and <path> +will be an additional handler-specific string for the user process to +configure the device, if needed. The name cannot contain ':', due to +LIO limitations. + +For all devices so discovered, the user handler opens /dev/uioX and +calls mmap(): + +mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0) + +where size must be equal to the value read from +/sys/class/uio/uioX/maps/map0/size. + + +Device Events: + +If a new device is added or removed, a notification will be broadcast +over netlink, using a generic netlink family name of "TCM-USER" and a +multicast group named "config". This will include the UIO name as +described in the previous section, as well as the UIO minor +number. This should allow userspace to identify both the UIO device and +the LIO device, so that after determining the device is supported +(based on subtype) it can take the appropriate action. + + +Other contingencies: + +Userspace handler process never attaches: + +- TCMU will post commands, and then abort them after a timeout period + (30 seconds.) + +Userspace handler process is killed: + +- It is still possible to restart and re-connect to TCMU + devices. Command ring is preserved. However, after the timeout period, + the kernel will abort pending tasks. + +Userspace handler process hangs: + +- The kernel will abort pending tasks after a timeout period. + +Userspace handler process is malicious: + +- The process can trivially break the handling of devices it controls, + but should not be able to access kernel memory outside its shared + memory areas. + + +Writing a user pass-through handler (with example code) +------------------------------------------------------- + +A user process handing a TCMU device must support the following: + +a) Discovering and configuring TCMU uio devices +b) Waiting for events on the device(s) +c) Managing the command ring: Parsing operations and commands, + performing work as needed, setting response fields (scsi_status and + possibly sense_buffer), updating cmd_tail, and notifying the kernel + that work has been finished + +First, consider instead writing a plugin for tcmu-runner. tcmu-runner +implements all of this, and provides a higher-level API for plugin +authors. + +TCMU is designed so that multiple unrelated processes can manage TCMU +devices separately. All handlers should make sure to only open their +devices, based opon a known subtype string. + +a) Discovering and configuring TCMU UIO devices: + +(error checking omitted for brevity) + +int fd, dev_fd; +char buf[256]; +unsigned long long map_len; +void *map; + +fd = open("/sys/class/uio/uio0/name", O_RDONLY); +ret = read(fd, buf, sizeof(buf)); +close(fd); +buf[ret-1] = '\0'; /* null-terminate and chop off the \n */ + +/* we only want uio devices whose name is a format we expect */ +if (strncmp(buf, "tcm-user", 8)) + exit(-1); + +/* Further checking for subtype also needed here */ + +fd = open(/sys/class/uio/%s/maps/map0/size, O_RDONLY); +ret = read(fd, buf, sizeof(buf)); +close(fd); +str_buf[ret-1] = '\0'; /* null-terminate and chop off the \n */ + +map_len = strtoull(buf, NULL, 0); + +dev_fd = open("/dev/uio0", O_RDWR); +map = mmap(NULL, map_len, PROT_READ|PROT_WRITE, MAP_SHARED, dev_fd, 0); + + +b) Waiting for events on the device(s) + +while (1) { + char buf[4]; + + int ret = read(dev_fd, buf, 4); /* will block */ + + handle_device_events(dev_fd, map); +} + + +c) Managing the command ring + +#include <linux/target_core_user.h> + +int handle_device_events(int fd, void *map) +{ + struct tcmu_mailbox *mb = map; + struct tcmu_cmd_entry *ent = (void *) mb + mb->cmdr_off + mb->cmd_tail; + int did_some_work = 0; + + /* Process events from cmd ring until we catch up with cmd_head */ + while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) { + + if (tcmu_hdr_get_op(&ent->hdr) == TCMU_OP_CMD) { + uint8_t *cdb = (void *)mb + ent->req.cdb_off; + bool success = true; + + /* Handle command here. */ + printf("SCSI opcode: 0x%x\n", cdb[0]); + + /* Set response fields */ + if (success) + ent->rsp.scsi_status = SCSI_NO_SENSE; + else { + /* Also fill in rsp->sense_buffer here */ + ent->rsp.scsi_status = SCSI_CHECK_CONDITION; + } + } + else { + /* Do nothing for PAD entries */ + } + + /* update cmd_tail */ + mb->cmd_tail = (mb->cmd_tail + tcmu_hdr_get_len(&ent->hdr)) % mb->cmdr_size; + ent = (void *) mb + mb->cmdr_off + mb->cmd_tail; + did_some_work = 1; + } + + /* Notify the kernel that work has been finished */ + if (did_some_work) { + uint32_t buf = 0; + + write(fd, &buf, 4); + } + + return 0; +} + + +Command filtering and pass_level +-------------------------------- + +TCMU supports a "pass_level" option with valid values of 0 or 1. When +the value is 0 (the default), nearly all SCSI commands received for +the device are passed through to the handler. This allows maximum +flexibility but increases the amount of code required by the handler, +to support all mandatory SCSI commands. If pass_level is set to 1, +then only IO-related commands are presented, and the rest are handled +by LIO's in-kernel command emulation. The commands presented at level +1 include all versions of: + +READ +WRITE +WRITE_VERIFY +XDWRITEREAD +WRITE_SAME +COMPARE_AND_WRITE +SYNCHRONIZE_CACHE +UNMAP + + +A final note +------------ + +Please be careful to return codes as defined by the SCSI +specifications. These are different than some values defined in the +scsi/scsi.h include file. For example, CHECK CONDITION's status code +is 2, not 1.
diff --git a/Documentation/this_cpu_ops.txt b/Documentation/this_cpu_ops.txt index 0ec9957..2cbf719 100644 --- a/Documentation/this_cpu_ops.txt +++ b/Documentation/this_cpu_ops.txt
@@ -41,7 +41,6 @@ are defined. These operations can be used without worrying about preemption and interrupts. - this_cpu_add() this_cpu_read(pcp) this_cpu_write(pcp, val) this_cpu_add(pcp, val) @@ -225,7 +224,6 @@ modifies the variable, then RMW actions can not be guaranteed to be safe. - __this_cpu_add() __this_cpu_read(pcp) __this_cpu_write(pcp, val) __this_cpu_add(pcp, val)
diff --git a/Documentation/timers/.gitignore b/Documentation/timers/.gitignore new file mode 100644 index 0000000..c5c45d7 --- /dev/null +++ b/Documentation/timers/.gitignore
@@ -0,0 +1 @@ +hpet_example
diff --git a/Documentation/timers/Makefile b/Documentation/timers/Makefile index 73f75f8..6c09ee6 100644 --- a/Documentation/timers/Makefile +++ b/Documentation/timers/Makefile
@@ -1,6 +1,3 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - # List of programs to build hostprogs-$(CONFIG_X86) := hpet_example
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt index 1cd07c0..fdb47637 100644 --- a/Documentation/usb/WUSB-Design-overview.txt +++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -161,19 +161,10 @@ The main building block here is the UWB device (struct uwb_dev). For each device that pops up in radio presence (ie: the UWB host receives a beacon from it) you get a struct uwb_dev that will show up in -/sys/class/uwb and in /sys/bus/uwb/devices. +/sys/bus/uwb/devices. -For each RC that is detected, a new struct uwb_rc is created. In turn, a -RC is also a device, so they also show in /sys/class/uwb and -/sys/bus/uwb/devices, but at the same time, only radio controllers show -up in /sys/class/uwb_rc. - - * - - [*] The reason for RCs being also devices is that not only we can - see them while enumerating the system device tree, but also on the - radio (their beacons and stuff), so the handling has to be - likewise to that of a device. +For each RC that is detected, a new struct uwb_rc and struct uwb_dev are +created. An entry is also created in /sys/class/uwb_rc for each RC. Each RC driver is implemented by a separate driver that plugs into the interface that the UWB stack provides through a struct uwb_rc_ops. The @@ -246,7 +237,7 @@ Device lists -All UWB devices are kept in the list of the struct bus_type uwb_bus. +All UWB devices are kept in the list of the struct bus_type uwb_bus_type. Bandwidth allocation @@ -317,7 +308,7 @@ into /devconnect/). This process starts the authentication process for the device. First we allocate a /fake port/ and assign an unauthenticated address (128 to 255--what we really do is -0x80 | fake_port_idx). We fiddle with the fake port status and /khubd/ +0x80 | fake_port_idx). We fiddle with the fake port status and /hub_wq/ sees a new connection, so he moves on to enable the fake port with a reset. So now we are in the reset path -- we know we have a non-yet enumerated @@ -326,7 +317,7 @@ exchange (FIXME: not yet done) and issue a /set address 0/ to bring the device to the default state. Device is authenticated. -From here, the USB stack takes control through the usb_hcd ops. khubd +From here, the USB stack takes control through the usb_hcd ops. hub_wq has seen the port status changes, as we have been toggling them. It will start enumerating and doing transfers through usb_hcd->urb_enqueue() to read descriptors and move our data. @@ -340,7 +331,7 @@ arrives to us as a notification through devconnect.c:wusb_handle_dn_alive(). If a device times out, we disconnect it from the system (cleaning up internal information and -toggling the bits in the fake hub port, which kicks khubd into removing +toggling the bits in the fake hub port, which kicks hub_wq into removing the rest of the stuff). This is done through devconnect:__wusb_check_devs(), which will scan the
diff --git a/Documentation/usb/hotplug.txt b/Documentation/usb/hotplug.txt index a80b0e9..5b243f3 100644 --- a/Documentation/usb/hotplug.txt +++ b/Documentation/usb/hotplug.txt
@@ -58,7 +58,7 @@ The USB subsystem currently invokes /sbin/hotplug when USB devices are added or removed from system. The invocation is done by the kernel -hub daemon thread [khubd], or else as part of root hub initialization +hub workqueue [hub_wq], or else as part of root hub initialization (done by init, modprobe, kapmd, etc). Its single command line parameter is the string "usb", and it passes these environment variables:
diff --git a/Documentation/vDSO/.gitignore b/Documentation/vDSO/.gitignore new file mode 100644 index 0000000..133bf9e --- /dev/null +++ b/Documentation/vDSO/.gitignore
@@ -0,0 +1,2 @@ +vdso_test +vdso_standalone_test_x86
diff --git a/Documentation/vDSO/Makefile b/Documentation/vDSO/Makefile new file mode 100644 index 0000000..ee075c3 --- /dev/null +++ b/Documentation/vDSO/Makefile
@@ -0,0 +1,15 @@ +# vdso_test won't build for glibc < 2.16, so disable it +# hostprogs-y := vdso_test +hostprogs-$(CONFIG_X86) := vdso_standalone_test_x86 +vdso_standalone_test_x86-objs := vdso_standalone_test_x86.o parse_vdso.o +vdso_test-objs := parse_vdso.o vdso_test.o + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS := -I$(objtree)/usr/include -std=gnu99 +HOSTCFLAGS_vdso_standalone_test_x86.o := -fno-asynchronous-unwind-tables -fno-stack-protector +HOSTLOADLIBES_vdso_standalone_test_x86 := -nostdlib +ifeq ($(CONFIG_X86_32),y) +HOSTLOADLIBES_vdso_standalone_test_x86 += -lgcc_s +endif
diff --git a/Documentation/vDSO/vdso_standalone_test_x86.c b/Documentation/vDSO/vdso_standalone_test_x86.c index d462402..93b0ebf 100644 --- a/Documentation/vDSO/vdso_standalone_test_x86.c +++ b/Documentation/vDSO/vdso_standalone_test_x86.c
@@ -63,7 +63,7 @@ x86_syscall3(__NR_exit, code, 0, 0); } -void to_base10(char *lastdig, uint64_t n) +void to_base10(char *lastdig, time_t n) { while (n) { *lastdig = (n % 10) + '0';
diff --git a/Documentation/video4linux/.gitignore b/Documentation/video4linux/.gitignore deleted file mode 100644 index 9527039..0000000 --- a/Documentation/video4linux/.gitignore +++ /dev/null
@@ -1 +0,0 @@ -v4lgrab
diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile new file mode 100644 index 0000000..65a351d --- /dev/null +++ b/Documentation/video4linux/Makefile
@@ -0,0 +1 @@ +obj-$(CONFIG_VIDEO_PCI_SKELETON) := v4l2-pci-skeleton.o
diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt new file mode 100644 index 0000000..eeb11a2 --- /dev/null +++ b/Documentation/video4linux/vivid.txt
@@ -0,0 +1,1111 @@ +vivid: Virtual Video Test Driver +================================ + +This driver emulates video4linux hardware of various types: video capture, video +output, vbi capture and output, radio receivers and transmitters and a software +defined radio receiver. In addition a simple framebuffer device is available for +testing capture and output overlays. + +Up to 64 vivid instances can be created, each with up to 16 inputs and 16 outputs. + +Each input can be a webcam, TV capture device, S-Video capture device or an HDMI +capture device. Each output can be an S-Video output device or an HDMI output +device. + +These inputs and outputs act exactly as a real hardware device would behave. This +allows you to use this driver as a test input for application development, since +you can test the various features without requiring special hardware. + +This document describes the features implemented by this driver: + +- Support for read()/write(), MMAP, USERPTR and DMABUF streaming I/O. +- A large list of test patterns and variations thereof +- Working brightness, contrast, saturation and hue controls +- Support for the alpha color component +- Full colorspace support, including limited/full RGB range +- All possible control types are present +- Support for various pixel aspect ratios and video aspect ratios +- Error injection to test what happens if errors occur +- Supports crop/compose/scale in any combination for both input and output +- Can emulate up to 4K resolutions +- All Field settings are supported for testing interlaced capturing +- Supports all standard YUV and RGB formats, including two multiplanar YUV formats +- Raw and Sliced VBI capture and output support +- Radio receiver and transmitter support, including RDS support +- Software defined radio (SDR) support +- Capture and output overlay support + +These features will be described in more detail below. + + +Table of Contents +----------------- + +Section 1: Configuring the driver +Section 2: Video Capture +Section 2.1: Webcam Input +Section 2.2: TV and S-Video Inputs +Section 2.3: HDMI Input +Section 3: Video Output +Section 3.1: S-Video Output +Section 3.2: HDMI Output +Section 4: VBI Capture +Section 5: VBI Output +Section 6: Radio Receiver +Section 7: Radio Transmitter +Section 8: Software Defined Radio Receiver +Section 9: Controls +Section 9.1: User Controls - Test Controls +Section 9.2: User Controls - Video Capture +Section 9.3: User Controls - Audio +Section 9.4: Vivid Controls +Section 9.4.1: Test Pattern Controls +Section 9.4.2: Capture Feature Selection Controls +Section 9.4.3: Output Feature Selection Controls +Section 9.4.4: Error Injection Controls +Section 9.4.5: VBI Raw Capture Controls +Section 9.5: Digital Video Controls +Section 9.6: FM Radio Receiver Controls +Section 9.7: FM Radio Modulator +Section 10: Video, VBI and RDS Looping +Section 10.1: Video and Sliced VBI looping +Section 10.2: Radio & RDS Looping +Section 11: Cropping, Composing, Scaling +Section 12: Formats +Section 13: Capture Overlay +Section 14: Output Overlay +Section 15: Some Future Improvements + + +Section 1: Configuring the driver +--------------------------------- + +By default the driver will create a single instance that has a video capture +device with webcam, TV, S-Video and HDMI inputs, a video output device with +S-Video and HDMI outputs, one vbi capture device, one vbi output device, one +radio receiver device, one radio transmitter device and one SDR device. + +The number of instances, devices, video inputs and outputs and their types are +all configurable using the following module options: + +n_devs: number of driver instances to create. By default set to 1. Up to 64 + instances can be created. + +node_types: which devices should each driver instance create. An array of + hexadecimal values, one for each instance. The default is 0x1d3d. + Each value is a bitmask with the following meaning: + bit 0: Video Capture node + bit 2-3: VBI Capture node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both + bit 4: Radio Receiver node + bit 5: Software Defined Radio Receiver node + bit 8: Video Output node + bit 10-11: VBI Output node: 0 = none, 1 = raw vbi, 2 = sliced vbi, 3 = both + bit 12: Radio Transmitter node + bit 16: Framebuffer for testing overlays + + So to create four instances, the first two with just one video capture + device, the second two with just one video output device you would pass + these module options to vivid: + + n_devs=4 node_types=0x1,0x1,0x100,0x100 + +num_inputs: the number of inputs, one for each instance. By default 4 inputs + are created for each video capture device. At most 16 inputs can be created, + and there must be at least one. + +input_types: the input types for each instance, the default is 0xe4. This defines + what the type of each input is when the inputs are created for each driver + instance. This is a hexadecimal value with up to 16 pairs of bits, each + pair gives the type and bits 0-1 map to input 0, bits 2-3 map to input 1, + 30-31 map to input 15. Each pair of bits has the following meaning: + + 00: this is a webcam input + 01: this is a TV tuner input + 10: this is an S-Video input + 11: this is an HDMI input + + So to create a video capture device with 8 inputs where input 0 is a TV + tuner, inputs 1-3 are S-Video inputs and inputs 4-7 are HDMI inputs you + would use the following module options: + + num_inputs=8 input_types=0xffa9 + +num_outputs: the number of outputs, one for each instance. By default 2 outputs + are created for each video output device. At most 16 outputs can be + created, and there must be at least one. + +output_types: the output types for each instance, the default is 0x02. This defines + what the type of each output is when the outputs are created for each + driver instance. This is a hexadecimal value with up to 16 bits, each bit + gives the type and bit 0 maps to output 0, bit 1 maps to output 1, bit + 15 maps to output 15. The meaning of each bit is as follows: + + 0: this is an S-Video output + 1: this is an HDMI output + + So to create a video output device with 8 outputs where outputs 0-3 are + S-Video outputs and outputs 4-7 are HDMI outputs you would use the + following module options: + + num_outputs=8 output_types=0xf0 + +vid_cap_nr: give the desired videoX start number for each video capture device. + The default is -1 which will just take the first free number. This allows + you to map capture video nodes to specific videoX device nodes. Example: + + n_devs=4 vid_cap_nr=2,4,6,8 + + This will attempt to assign /dev/video2 for the video capture device of + the first vivid instance, video4 for the next up to video8 for the last + instance. If it can't succeed, then it will just take the next free + number. + +vid_out_nr: give the desired videoX start number for each video output device. + The default is -1 which will just take the first free number. + +vbi_cap_nr: give the desired vbiX start number for each vbi capture device. + The default is -1 which will just take the first free number. + +vbi_out_nr: give the desired vbiX start number for each vbi output device. + The default is -1 which will just take the first free number. + +radio_rx_nr: give the desired radioX start number for each radio receiver device. + The default is -1 which will just take the first free number. + +radio_tx_nr: give the desired radioX start number for each radio transmitter + device. The default is -1 which will just take the first free number. + +sdr_cap_nr: give the desired swradioX start number for each SDR capture device. + The default is -1 which will just take the first free number. + +ccs_cap_mode: specify the allowed video capture crop/compose/scaling combination + for each driver instance. Video capture devices can have any combination + of cropping, composing and scaling capabilities and this will tell the + vivid driver which of those is should emulate. By default the user can + select this through controls. + + The value is either -1 (controlled by the user) or a set of three bits, + each enabling (1) or disabling (0) one of the features: + + bit 0: Enable crop support. Cropping will take only part of the + incoming picture. + bit 1: Enable compose support. Composing will copy the incoming + picture into a larger buffer. + bit 2: Enable scaling support. Scaling can scale the incoming + picture. The scaler of the vivid driver can enlarge up + or down to four times the original size. The scaler is + very simple and low-quality. Simplicity and speed were + key, not quality. + + Note that this value is ignored by webcam inputs: those enumerate + discrete framesizes and that is incompatible with cropping, composing + or scaling. + +ccs_out_mode: specify the allowed video output crop/compose/scaling combination + for each driver instance. Video output devices can have any combination + of cropping, composing and scaling capabilities and this will tell the + vivid driver which of those is should emulate. By default the user can + select this through controls. + + The value is either -1 (controlled by the user) or a set of three bits, + each enabling (1) or disabling (0) one of the features: + + bit 0: Enable crop support. Cropping will take only part of the + outgoing buffer. + bit 1: Enable compose support. Composing will copy the incoming + buffer into a larger picture frame. + bit 2: Enable scaling support. Scaling can scale the incoming + buffer. The scaler of the vivid driver can enlarge up + or down to four times the original size. The scaler is + very simple and low-quality. Simplicity and speed were + key, not quality. + +multiplanar: select whether each device instance supports multi-planar formats, + and thus the V4L2 multi-planar API. By default the first device instance + is single-planar, the second multi-planar, and it keeps alternating. + + This module option can override that for each instance. Values are: + + 0: use alternating single and multi-planar devices. + 1: this is a single-planar instance. + 2: this is a multi-planar instance. + +vivid_debug: enable driver debugging info + +no_error_inj: if set disable the error injecting controls. This option is + needed in order to run a tool like v4l2-compliance. Tools like that + exercise all controls including a control like 'Disconnect' which + emulates a USB disconnect, making the device inaccessible and so + all tests that v4l2-compliance is doing will fail afterwards. + + There may be other situations as well where you want to disable the + error injection support of vivid. When this option is set, then the + controls that select crop, compose and scale behavior are also + removed. Unless overridden by ccs_cap_mode and/or ccs_out_mode the + will default to enabling crop, compose and scaling. + +Taken together, all these module options allow you to precisely customize +the driver behavior and test your application with all sorts of permutations. +It is also very suitable to emulate hardware that is not yet available, e.g. +when developing software for a new upcoming device. + + +Section 2: Video Capture +------------------------ + +This is probably the most frequently used feature. The video capture device +can be configured by using the module options num_inputs, input_types and +ccs_cap_mode (see section 1 for more detailed information), but by default +four inputs are configured: a webcam, a TV tuner, an S-Video and an HDMI +input, one input for each input type. Those are described in more detail +below. + +Special attention has been given to the rate at which new frames become +available. The jitter will be around 1 jiffie (that depends on the HZ +configuration of your kernel, so usually 1/100, 1/250 or 1/1000 of a second), +but the long-term behavior is exactly following the framerate. So a +framerate of 59.94 Hz is really different from 60 Hz. If the framerate +exceeds your kernel's HZ value, then you will get dropped frames, but the +frame/field sequence counting will keep track of that so the sequence +count will skip whenever frames are dropped. + + +Section 2.1: Webcam Input +------------------------- + +The webcam input supports three framesizes: 320x180, 640x360 and 1280x720. It +supports frames per second settings of 10, 15, 25, 30, 50 and 60 fps. Which ones +are available depends on the chosen framesize: the larger the framesize, the +lower the maximum frames per second. + +The initially selected colorspace when you switch to the webcam input will be +sRGB. + + +Section 2.2: TV and S-Video Inputs +---------------------------------- + +The only difference between the TV and S-Video input is that the TV has a +tuner. Otherwise they behave identically. + +These inputs support audio inputs as well: one TV and one Line-In. They +both support all TV standards. If the standard is queried, then the Vivid +controls 'Standard Signal Mode' and 'Standard' determine what +the result will be. + +These inputs support all combinations of the field setting. Special care has +been taken to faithfully reproduce how fields are handled for the different +TV standards. This is particularly noticable when generating a horizontally +moving image so the temporal effect of using interlaced formats becomes clearly +visible. For 50 Hz standards the top field is the oldest and the bottom field +is the newest in time. For 60 Hz standards that is reversed: the bottom field +is the oldest and the top field is the newest in time. + +When you start capturing in V4L2_FIELD_ALTERNATE mode the first buffer will +contain the top field for 50 Hz standards and the bottom field for 60 Hz +standards. This is what capture hardware does as well. + +Finally, for PAL/SECAM standards the first half of the top line contains noise. +This simulates the Wide Screen Signal that is commonly placed there. + +The initially selected colorspace when you switch to the TV or S-Video input +will be SMPTE-170M. + +The pixel aspect ratio will depend on the TV standard. The video aspect ratio +can be selected through the 'Standard Aspect Ratio' Vivid control. +Choices are '4x3', '16x9' which will give letterboxed widescreen video and +'16x9 Anomorphic' which will give full screen squashed anamorphic widescreen +video that will need to be scaled accordingly. + +The TV 'tuner' supports a frequency range of 44-958 MHz. Channels are available +every 6 MHz, starting from 49.25 MHz. For each channel the generated image +will be in color for the +/- 0.25 MHz around it, and in grayscale for ++/- 1 MHz around the channel. Beyond that it is just noise. The VIDIOC_G_TUNER +ioctl will return 100% signal strength for +/- 0.25 MHz and 50% for +/- 1 MHz. +It will also return correct afc values to show whether the frequency is too +low or too high. + +The audio subchannels that are returned are MONO for the +/- 1 MHz range around +a valid channel frequency. When the frequency is within +/- 0.25 MHz of the +channel it will return either MONO, STEREO, either MONO | SAP (for NTSC) or +LANG1 | LANG2 (for others), or STEREO | SAP. + +Which one is returned depends on the chosen channel, each next valid channel +will cycle through the possible audio subchannel combinations. This allows +you to test the various combinations by just switching channels.. + +Finally, for these inputs the v4l2_timecode struct is filled in in the +dequeued v4l2_buffer struct. + + +Section 2.3: HDMI Input +----------------------- + +The HDMI inputs supports all CEA-861 and DMT timings, both progressive and +interlaced, for pixelclock frequencies between 25 and 600 MHz. The field +mode for interlaced formats is always V4L2_FIELD_ALTERNATE. For HDMI the +field order is always top field first, and when you start capturing an +interlaced format you will receive the top field first. + +The initially selected colorspace when you switch to the HDMI input or +select an HDMI timing is based on the format resolution: for resolutions +less than or equal to 720x576 the colorspace is set to SMPTE-170M, for +others it is set to REC-709 (CEA-861 timings) or sRGB (VESA DMT timings). + +The pixel aspect ratio will depend on the HDMI timing: for 720x480 is it +set as for the NTSC TV standard, for 720x576 it is set as for the PAL TV +standard, and for all others a 1:1 pixel aspect ratio is returned. + +The video aspect ratio can be selected through the 'DV Timings Aspect Ratio' +Vivid control. Choices are 'Source Width x Height' (just use the +same ratio as the chosen format), '4x3' or '16x9', either of which can +result in pillarboxed or letterboxed video. + +For HDMI inputs it is possible to set the EDID. By default a simple EDID +is provided. You can only set the EDID for HDMI inputs. Internally, however, +the EDID is shared between all HDMI inputs. + +No interpretation is done of the EDID data. + + +Section 3: Video Output +----------------------- + +The video output device can be configured by using the module options +num_outputs, output_types and ccs_out_mode (see section 1 for more detailed +information), but by default two outputs are configured: an S-Video and an +HDMI input, one output for each output type. Those are described in more detail +below. + +Like with video capture the framerate is also exact in the long term. + + +Section 3.1: S-Video Output +--------------------------- + +This output supports audio outputs as well: "Line-Out 1" and "Line-Out 2". +The S-Video output supports all TV standards. + +This output supports all combinations of the field setting. + +The initially selected colorspace when you switch to the TV or S-Video input +will be SMPTE-170M. + + +Section 3.2: HDMI Output +------------------------ + +The HDMI output supports all CEA-861 and DMT timings, both progressive and +interlaced, for pixelclock frequencies between 25 and 600 MHz. The field +mode for interlaced formats is always V4L2_FIELD_ALTERNATE. + +The initially selected colorspace when you switch to the HDMI output or +select an HDMI timing is based on the format resolution: for resolutions +less than or equal to 720x576 the colorspace is set to SMPTE-170M, for +others it is set to REC-709 (CEA-861 timings) or sRGB (VESA DMT timings). + +The pixel aspect ratio will depend on the HDMI timing: for 720x480 is it +set as for the NTSC TV standard, for 720x576 it is set as for the PAL TV +standard, and for all others a 1:1 pixel aspect ratio is returned. + +An HDMI output has a valid EDID which can be obtained through VIDIOC_G_EDID. + + +Section 4: VBI Capture +---------------------- + +There are three types of VBI capture devices: those that only support raw +(undecoded) VBI, those that only support sliced (decoded) VBI and those that +support both. This is determined by the node_types module option. In all +cases the driver will generate valid VBI data: for 60 Hz standards it will +generate Closed Caption and XDS data. The closed caption stream will +alternate between "Hello world!" and "Closed captions test" every second. +The XDS stream will give the current time once a minute. For 50 Hz standards +it will generate the Wide Screen Signal which is based on the actual Video +Aspect Ratio control setting and teletext pages 100-159, one page per frame. + +The VBI device will only work for the S-Video and TV inputs, it will give +back an error if the current input is a webcam or HDMI. + + +Section 5: VBI Output +--------------------- + +There are three types of VBI output devices: those that only support raw +(undecoded) VBI, those that only support sliced (decoded) VBI and those that +support both. This is determined by the node_types module option. + +The sliced VBI output supports the Wide Screen Signal and the teletext signal +for 50 Hz standards and Closed Captioning + XDS for 60 Hz standards. + +The VBI device will only work for the S-Video output, it will give +back an error if the current output is HDMI. + + +Section 6: Radio Receiver +------------------------- + +The radio receiver emulates an FM/AM/SW receiver. The FM band also supports RDS. +The frequency ranges are: + + FM: 64 MHz - 108 MHz + AM: 520 kHz - 1710 kHz + SW: 2300 kHz - 26.1 MHz + +Valid channels are emulated every 1 MHz for FM and every 100 kHz for AM and SW. +The signal strength decreases the further the frequency is from the valid +frequency until it becomes 0% at +/- 50 kHz (FM) or 5 kHz (AM/SW) from the +ideal frequency. The initial frequency when the driver is loaded is set to +95 MHz. + +The FM receiver supports RDS as well, both using 'Block I/O' and 'Controls' +modes. In the 'Controls' mode the RDS information is stored in read-only +controls. These controls are updated every time the frequency is changed, +or when the tuner status is requested. The Block I/O method uses the read() +interface to pass the RDS blocks on to the application for decoding. + +The RDS signal is 'detected' for +/- 12.5 kHz around the channel frequency, +and the further the frequency is away from the valid frequency the more RDS +errors are randomly introduced into the block I/O stream, up to 50% of all +blocks if you are +/- 12.5 kHz from the channel frequency. All four errors +can occur in equal proportions: blocks marked 'CORRECTED', blocks marked +'ERROR', blocks marked 'INVALID' and dropped blocks. + +The generated RDS stream contains all the standard fields contained in a +0B group, and also radio text and the current time. + +The receiver supports HW frequency seek, either in Bounded mode, Wrap Around +mode or both, which is configurable with the "Radio HW Seek Mode" control. + + +Section 7: Radio Transmitter +---------------------------- + +The radio transmitter emulates an FM/AM/SW transmitter. The FM band also supports RDS. +The frequency ranges are: + + FM: 64 MHz - 108 MHz + AM: 520 kHz - 1710 kHz + SW: 2300 kHz - 26.1 MHz + +The initial frequency when the driver is loaded is 95.5 MHz. + +The FM transmitter supports RDS as well, both using 'Block I/O' and 'Controls' +modes. In the 'Controls' mode the transmitted RDS information is configured +using controls, and in 'Block I/O' mode the blocks are passed to the driver +using write(). + + +Section 8: Software Defined Radio Receiver +------------------------------------------ + +The SDR receiver has three frequency bands for the ADC tuner: + + - 300 kHz + - 900 kHz - 2800 kHz + - 3200 kHz + +The RF tuner supports 50 MHz - 2000 MHz. + +The generated data contains the In-phase and Quadrature components of a +1 kHz tone that has an amplitude of sqrt(2). + + +Section 9: Controls +------------------- + +Different devices support different controls. The sections below will describe +each control and which devices support them. + + +Section 9.1: User Controls - Test Controls +------------------------------------------ + +The Button, Boolean, Integer 32 Bits, Integer 64 Bits, Menu, String, Bitmask and +Integer Menu are controls that represent all possible control types. The Menu +control and the Integer Menu control both have 'holes' in their menu list, +meaning that one or more menu items return EINVAL when VIDIOC_QUERYMENU is called. +Both menu controls also have a non-zero minimum control value. These features +allow you to check if your application can handle such things correctly. +These controls are supported for every device type. + + +Section 9.2: User Controls - Video Capture +------------------------------------------ + +The following controls are specific to video capture. + +The Brightness, Contrast, Saturation and Hue controls actually work and are +standard. There is one special feature with the Brightness control: each +video input has its own brightness value, so changing input will restore +the brightness for that input. In addition, each video input uses a different +brightness range (minimum and maximum control values). Switching inputs will +cause a control event to be sent with the V4L2_EVENT_CTRL_CH_RANGE flag set. +This allows you to test controls that can change their range. + +The 'Gain, Automatic' and Gain controls can be used to test volatile controls: +if 'Gain, Automatic' is set, then the Gain control is volatile and changes +constantly. If 'Gain, Automatic' is cleared, then the Gain control is a normal +control. + +The 'Horizontal Flip' and 'Vertical Flip' controls can be used to flip the +image. These combine with the 'Sensor Flipped Horizontally/Vertically' Vivid +controls. + +The 'Alpha Component' control can be used to set the alpha component for +formats containing an alpha channel. + + +Section 9.3: User Controls - Audio +---------------------------------- + +The following controls are specific to video capture and output and radio +receivers and transmitters. + +The 'Volume' and 'Mute' audio controls are typical for such devices to +control the volume and mute the audio. They don't actually do anything in +the vivid driver. + + +Section 9.4: Vivid Controls +--------------------------- + +These vivid custom controls control the image generation, error injection, etc. + + +Section 9.4.1: Test Pattern Controls +------------------------------------ + +The Test Pattern Controls are all specific to video capture. + +Test Pattern: selects which test pattern to use. Use the CSC Colorbar for + testing colorspace conversions: the colors used in that test pattern + map to valid colors in all colorspaces. The colorspace conversion + is disabled for the other test patterns. + +OSD Text Mode: selects whether the text superimposed on the + test pattern should be shown, and if so, whether only counters should + be displayed or the full text. + +Horizontal Movement: selects whether the test pattern should + move to the left or right and at what speed. + +Vertical Movement: does the same for the vertical direction. + +Show Border: show a two-pixel wide border at the edge of the actual image, + excluding letter or pillarboxing. + +Show Square: show a square in the middle of the image. If the image is + displayed with the correct pixel and image aspect ratio corrections, + then the width and height of the square on the monitor should be + the same. + +Insert SAV Code in Image: adds a SAV (Start of Active Video) code to the image. + This can be used to check if such codes in the image are inadvertently + interpreted instead of being ignored. + +Insert EAV Code in Image: does the same for the EAV (End of Active Video) code. + + +Section 9.4.2: Capture Feature Selection Controls +------------------------------------------------- + +These controls are all specific to video capture. + +Sensor Flipped Horizontally: the image is flipped horizontally and the + V4L2_IN_ST_HFLIP input status flag is set. This emulates the case where + a sensor is for example mounted upside down. + +Sensor Flipped Vertically: the image is flipped vertically and the + V4L2_IN_ST_VFLIP input status flag is set. This emulates the case where + a sensor is for example mounted upside down. + +Standard Aspect Ratio: selects if the image aspect ratio as used for the TV or + S-Video input should be 4x3, 16x9 or anamorphic widescreen. This may + introduce letterboxing. + +DV Timings Aspect Ratio: selects if the image aspect ratio as used for the HDMI + input should be the same as the source width and height ratio, or if + it should be 4x3 or 16x9. This may introduce letter or pillarboxing. + +Timestamp Source: selects when the timestamp for each buffer is taken. + +Colorspace: selects which colorspace should be used when generating the image. + This only applies if the CSC Colorbar test pattern is selected, + otherwise the test pattern will go through unconverted (except for + the so-called 'Transfer Function' corrections and the R'G'B' to Y'CbCr + conversion). This behavior is also what you want, since a 75% Colorbar + should really have 75% signal intensity and should not be affected + by colorspace conversions. + + Changing the colorspace will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a detected colorspace change. + +Limited RGB Range (16-235): selects if the RGB range of the HDMI source should + be limited or full range. This combines with the Digital Video 'Rx RGB + Quantization Range' control and can be used to test what happens if + a source provides you with the wrong quantization range information. + See the description of that control for more details. + +Apply Alpha To Red Only: apply the alpha channel as set by the 'Alpha Component' + user control to the red color of the test pattern only. + +Enable Capture Cropping: enables crop support. This control is only present if + the ccs_cap_mode module option is set to the default value of -1 and if + the no_error_inj module option is set to 0 (the default). + +Enable Capture Composing: enables composing support. This control is only + present if the ccs_cap_mode module option is set to the default value of + -1 and if the no_error_inj module option is set to 0 (the default). + +Enable Capture Scaler: enables support for a scaler (maximum 4 times upscaling + and downscaling). This control is only present if the ccs_cap_mode + module option is set to the default value of -1 and if the no_error_inj + module option is set to 0 (the default). + +Maximum EDID Blocks: determines how many EDID blocks the driver supports. + Note that the vivid driver does not actually interpret new EDID + data, it just stores it. It allows for up to 256 EDID blocks + which is the maximum supported by the standard. + +Fill Percentage of Frame: can be used to draw only the top X percent + of the image. Since each frame has to be drawn by the driver, this + demands a lot of the CPU. For large resolutions this becomes + problematic. By drawing only part of the image this CPU load can + be reduced. + + +Section 9.4.3: Output Feature Selection Controls +------------------------------------------------ + +These controls are all specific to video output. + +Enable Output Cropping: enables crop support. This control is only present if + the ccs_out_mode module option is set to the default value of -1 and if + the no_error_inj module option is set to 0 (the default). + +Enable Output Composing: enables composing support. This control is only + present if the ccs_out_mode module option is set to the default value of + -1 and if the no_error_inj module option is set to 0 (the default). + +Enable Output Scaler: enables support for a scaler (maximum 4 times upscaling + and downscaling). This control is only present if the ccs_out_mode + module option is set to the default value of -1 and if the no_error_inj + module option is set to 0 (the default). + + +Section 9.4.4: Error Injection Controls +--------------------------------------- + +The following two controls are only valid for video and vbi capture. + +Standard Signal Mode: selects the behavior of VIDIOC_QUERYSTD: what should + it return? + + Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a changed input condition (e.g. a cable + was plugged in or out). + +Standard: selects the standard that VIDIOC_QUERYSTD should return if the + previous control is set to "Selected Standard". + + Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a changed input standard. + + +The following two controls are only valid for video capture. + +DV Timings Signal Mode: selects the behavior of VIDIOC_QUERY_DV_TIMINGS: what + should it return? + + Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates a changed input condition (e.g. a cable + was plugged in or out). + +DV Timings: selects the timings the VIDIOC_QUERY_DV_TIMINGS should return + if the previous control is set to "Selected DV Timings". + + Changing this control will result in the V4L2_EVENT_SOURCE_CHANGE + to be sent since it emulates changed input timings. + + +The following controls are only present if the no_error_inj module option +is set to 0 (the default). These controls are valid for video and vbi +capture and output streams and for the SDR capture device except for the +Disconnect control which is valid for all devices. + +Wrap Sequence Number: test what happens when you wrap the sequence number in + struct v4l2_buffer around. + +Wrap Timestamp: test what happens when you wrap the timestamp in struct + v4l2_buffer around. + +Percentage of Dropped Buffers: sets the percentage of buffers that + are never returned by the driver (i.e., they are dropped). + +Disconnect: emulates a USB disconnect. The device will act as if it has + been disconnected. Only after all open filehandles to the device + node have been closed will the device become 'connected' again. + +Inject V4L2_BUF_FLAG_ERROR: when pressed, the next frame returned by + the driver will have the error flag set (i.e. the frame is marked + corrupt). + +Inject VIDIOC_REQBUFS Error: when pressed, the next REQBUFS or CREATE_BUFS + ioctl call will fail with an error. To be precise: the videobuf2 + queue_setup() op will return -EINVAL. + +Inject VIDIOC_QBUF Error: when pressed, the next VIDIOC_QBUF or + VIDIOC_PREPARE_BUFFER ioctl call will fail with an error. To be + precise: the videobuf2 buf_prepare() op will return -EINVAL. + +Inject VIDIOC_STREAMON Error: when pressed, the next VIDIOC_STREAMON ioctl + call will fail with an error. To be precise: the videobuf2 + start_streaming() op will return -EINVAL. + +Inject Fatal Streaming Error: when pressed, the streaming core will be + marked as having suffered a fatal error, the only way to recover + from that is to stop streaming. To be precise: the videobuf2 + vb2_queue_error() function is called. + + +Section 9.4.5: VBI Raw Capture Controls +--------------------------------------- + +Interlaced VBI Format: if set, then the raw VBI data will be interlaced instead + of providing it grouped by field. + + +Section 9.5: Digital Video Controls +----------------------------------- + +Rx RGB Quantization Range: sets the RGB quantization detection of the HDMI + input. This combines with the Vivid 'Limited RGB Range (16-235)' + control and can be used to test what happens if a source provides + you with the wrong quantization range information. This can be tested + by selecting an HDMI input, setting this control to Full or Limited + range and selecting the opposite in the 'Limited RGB Range (16-235)' + control. The effect is easy to see if the 'Gray Ramp' test pattern + is selected. + +Tx RGB Quantization Range: sets the RGB quantization detection of the HDMI + output. It is currently not used for anything in vivid, but most HDMI + transmitters would typically have this control. + +Transmit Mode: sets the transmit mode of the HDMI output to HDMI or DVI-D. This + affects the reported colorspace since DVI_D outputs will always use + sRGB. + + +Section 9.6: FM Radio Receiver Controls +--------------------------------------- + +RDS Reception: set if the RDS receiver should be enabled. + +RDS Program Type: +RDS PS Name: +RDS Radio Text: +RDS Traffic Announcement: +RDS Traffic Program: +RDS Music: these are all read-only controls. If RDS Rx I/O Mode is set to + "Block I/O", then they are inactive as well. If RDS Rx I/O Mode is set + to "Controls", then these controls report the received RDS data. Note + that the vivid implementation of this is pretty basic: they are only + updated when you set a new frequency or when you get the tuner status + (VIDIOC_G_TUNER). + +Radio HW Seek Mode: can be one of "Bounded", "Wrap Around" or "Both". This + determines if VIDIOC_S_HW_FREQ_SEEK will be bounded by the frequency + range or wrap-around or if it is selectable by the user. + +Radio Programmable HW Seek: if set, then the user can provide the lower and + upper bound of the HW Seek. Otherwise the frequency range boundaries + will be used. + +Generate RBDS Instead of RDS: if set, then generate RBDS (the US variant of + RDS) data instead of RDS (European-style RDS). This affects only the + PICODE and PTY codes. + +RDS Rx I/O Mode: this can be "Block I/O" where the RDS blocks have to be read() + by the application, or "Controls" where the RDS data is provided by + the RDS controls mentioned above. + + +Section 9.7: FM Radio Modulator Controls +---------------------------------------- + +RDS Program ID: +RDS Program Type: +RDS PS Name: +RDS Radio Text: +RDS Stereo: +RDS Artificial Head: +RDS Compressed: +RDS Dymanic PTY: +RDS Traffic Announcement: +RDS Traffic Program: +RDS Music: these are all controls that set the RDS data that is transmitted by + the FM modulator. + +RDS Tx I/O Mode: this can be "Block I/O" where the application has to use write() + to pass the RDS blocks to the driver, or "Controls" where the RDS data is + provided by the RDS controls mentioned above. + + +Section 10: Video, VBI and RDS Looping +-------------------------------------- + +The vivid driver supports looping of video output to video input, VBI output +to VBI input and RDS output to RDS input. For video/VBI looping this emulates +as if a cable was hooked up between the output and input connector. So video +and VBI looping is only supported between S-Video and HDMI inputs and outputs. +VBI is only valid for S-Video as it makes no sense for HDMI. + +Since radio is wireless this looping always happens if the radio receiver +frequency is close to the radio transmitter frequency. In that case the radio +transmitter will 'override' the emulated radio stations. + +Looping is currently supported only between devices created by the same +vivid driver instance. + + +Section 10.1: Video and Sliced VBI looping +------------------------------------------ + +The way to enable video/VBI looping is currently fairly crude. A 'Loop Video' +control is available in the "Vivid" control class of the video +output and VBI output devices. When checked the video looping will be enabled. +Once enabled any video S-Video or HDMI input will show a static test pattern +until the video output has started. At that time the video output will be +looped to the video input provided that: + +- the input type matches the output type. So the HDMI input cannot receive + video from the S-Video output. + +- the video resolution of the video input must match that of the video output. + So it is not possible to loop a 50 Hz (720x576) S-Video output to a 60 Hz + (720x480) S-Video input, or a 720p60 HDMI output to a 1080p30 input. + +- the pixel formats must be identical on both sides. Otherwise the driver would + have to do pixel format conversion as well, and that's taking things too far. + +- the field settings must be identical on both sides. Same reason as above: + requiring the driver to convert from one field format to another complicated + matters too much. This also prohibits capturing with 'Field Top' or 'Field + Bottom' when the output video is set to 'Field Alternate'. This combination, + while legal, became too complicated to support. Both sides have to be 'Field + Alternate' for this to work. Also note that for this specific case the + sequence and field counting in struct v4l2_buffer on the capture side may not + be 100% accurate. + +- on the input side the "Standard Signal Mode" for the S-Video input or the + "DV Timings Signal Mode" for the HDMI input should be configured so that a + valid signal is passed to the video input. + +The framerates do not have to match, although this might change in the future. + +By default you will see the OSD text superimposed on top of the looped video. +This can be turned off by changing the "OSD Text Mode" control of the video +capture device. + +For VBI looping to work all of the above must be valid and in addition the vbi +output must be configured for sliced VBI. The VBI capture side can be configured +for either raw or sliced VBI. Note that at the moment only CC/XDS (60 Hz formats) +and WSS (50 Hz formats) VBI data is looped. Teletext VBI data is not looped. + + +Section 10.2: Radio & RDS Looping +--------------------------------- + +As mentioned in section 6 the radio receiver emulates stations are regular +frequency intervals. Depending on the frequency of the radio receiver a +signal strength value is calculated (this is returned by VIDIOC_G_TUNER). +However, it will also look at the frequency set by the radio transmitter and +if that results in a higher signal strength than the settings of the radio +transmitter will be used as if it was a valid station. This also includes +the RDS data (if any) that the transmitter 'transmits'. This is received +faithfully on the receiver side. Note that when the driver is loaded the +frequencies of the radio receiver and transmitter are not identical, so +initially no looping takes place. + + +Section 11: Cropping, Composing, Scaling +---------------------------------------- + +This driver supports cropping, composing and scaling in any combination. Normally +which features are supported can be selected through the Vivid controls, +but it is also possible to hardcode it when the module is loaded through the +ccs_cap_mode and ccs_out_mode module options. See section 1 on the details of +these module options. + +This allows you to test your application for all these variations. + +Note that the webcam input never supports cropping, composing or scaling. That +only applies to the TV/S-Video/HDMI inputs and outputs. The reason is that +webcams, including this virtual implementation, normally use +VIDIOC_ENUM_FRAMESIZES to list a set of discrete framesizes that it supports. +And that does not combine with cropping, composing or scaling. This is +primarily a limitation of the V4L2 API which is carefully reproduced here. + +The minimum and maximum resolutions that the scaler can achieve are 16x16 and +(4096 * 4) x (2160 x 4), but it can only scale up or down by a factor of 4 or +less. So for a source resolution of 1280x720 the minimum the scaler can do is +320x180 and the maximum is 5120x2880. You can play around with this using the +qv4l2 test tool and you will see these dependencies. + +This driver also supports larger 'bytesperline' settings, something that +VIDIOC_S_FMT allows but that few drivers implement. + +The scaler is a simple scaler that uses the Coarse Bresenham algorithm. It's +designed for speed and simplicity, not quality. + +If the combination of crop, compose and scaling allows it, then it is possible +to change crop and compose rectangles on the fly. + + +Section 12: Formats +------------------- + +The driver supports all the regular packed YUYV formats, 16, 24 and 32 RGB +packed formats and two multiplanar formats (one luma and one chroma plane). + +The alpha component can be set through the 'Alpha Component' User control +for those formats that support it. If the 'Apply Alpha To Red Only' control +is set, then the alpha component is only used for the color red and set to +0 otherwise. + +The driver has to be configured to support the multiplanar formats. By default +the first driver instance is single-planar, the second is multi-planar, and it +keeps alternating. This can be changed by setting the multiplanar module option, +see section 1 for more details on that option. + +If the driver instance is using the multiplanar formats/API, then the first +single planar format (YUYV) and the multiplanar NV16M and NV61M formats the +will have a plane that has a non-zero data_offset of 128 bytes. It is rare for +data_offset to be non-zero, so this is a useful feature for testing applications. + +Video output will also honor any data_offset that the application set. + + +Section 13: Capture Overlay +--------------------------- + +Note: capture overlay support is implemented primarily to test the existing +V4L2 capture overlay API. In practice few if any GPUs support such overlays +anymore, and neither are they generally needed anymore since modern hardware +is so much more capable. By setting flag 0x10000 in the node_types module +option the vivid driver will create a simple framebuffer device that can be +used for testing this API. Whether this API should be used for new drivers is +questionable. + +This driver has support for a destructive capture overlay with bitmap clipping +and list clipping (up to 16 rectangles) capabilities. Overlays are not +supported for multiplanar formats. It also honors the struct v4l2_window field +setting: if it is set to FIELD_TOP or FIELD_BOTTOM and the capture setting is +FIELD_ALTERNATE, then only the top or bottom fields will be copied to the overlay. + +The overlay only works if you are also capturing at that same time. This is a +vivid limitation since it copies from a buffer to the overlay instead of +filling the overlay directly. And if you are not capturing, then no buffers +are available to fill. + +In addition, the pixelformat of the capture format and that of the framebuffer +must be the same for the overlay to work. Otherwise VIDIOC_OVERLAY will return +an error. + +In order to really see what it going on you will need to create two vivid +instances: the first with a framebuffer enabled. You configure the capture +overlay of the second instance to use the framebuffer of the first, then +you start capturing in the second instance. For the first instance you setup +the output overlay for the video output, turn on video looping and capture +to see the blended framebuffer overlay that's being written to by the second +instance. This setup would require the following commands: + + $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1 + $ v4l2-ctl -d1 --find-fb + /dev/fb1 is the framebuffer associated with base address 0x12800000 + $ sudo v4l2-ctl -d2 --set-fbuf fb=1 + $ v4l2-ctl -d1 --set-fbuf fb=1 + $ v4l2-ctl -d0 --set-fmt-video=pixelformat='AR15' + $ v4l2-ctl -d1 --set-fmt-video-out=pixelformat='AR15' + $ v4l2-ctl -d2 --set-fmt-video=pixelformat='AR15' + $ v4l2-ctl -d0 -i2 + $ v4l2-ctl -d2 -i2 + $ v4l2-ctl -d2 -c horizontal_movement=4 + $ v4l2-ctl -d1 --overlay=1 + $ v4l2-ctl -d1 -c loop_video=1 + $ v4l2-ctl -d2 --stream-mmap --overlay=1 + +And from another console: + + $ v4l2-ctl -d1 --stream-out-mmap + +And yet another console: + + $ qv4l2 + +and start streaming. + +As you can see, this is not for the faint of heart... + + +Section 14: Output Overlay +-------------------------- + +Note: output overlays are primarily implemented in order to test the existing +V4L2 output overlay API. Whether this API should be used for new drivers is +questionable. + +This driver has support for an output overlay and is capable of: + + - bitmap clipping, + - list clipping (up to 16 rectangles) + - chromakey + - source chromakey + - global alpha + - local alpha + - local inverse alpha + +Output overlays are not supported for multiplanar formats. In addition, the +pixelformat of the capture format and that of the framebuffer must be the +same for the overlay to work. Otherwise VIDIOC_OVERLAY will return an error. + +Output overlays only work if the driver has been configured to create a +framebuffer by setting flag 0x10000 in the node_types module option. The +created framebuffer has a size of 720x576 and supports ARGB 1:5:5:5 and +RGB 5:6:5. + +In order to see the effects of the various clipping, chromakeying or alpha +processing capabilities you need to turn on video looping and see the results +on the capture side. The use of the clipping, chromakeying or alpha processing +capabilities will slow down the video loop considerably as a lot of checks have +to be done per pixel. + + +Section 15: Some Future Improvements +------------------------------------ + +Just as a reminder and in no particular order: + +- Add a virtual alsa driver to test audio +- Add virtual sub-devices and media controller support +- Some support for testing compressed video +- Add support to loop raw VBI output to raw VBI input +- Add support to loop teletext sliced VBI output to VBI input +- Fix sequence/field numbering when looping of video with alternate fields +- Add support for V4L2_CID_BG_COLOR for video outputs +- Add ARGB888 overlay support: better testing of the alpha channel +- Add custom DV timings support +- Add support for V4L2_DV_FL_REDUCED_FPS +- Improve pixel aspect support in the tpg code by passing a real v4l2_fract +- Use per-queue locks and/or per-device locks to improve throughput +- Add support to loop from a specific output to a specific input across + vivid instances +- Add support for VIDIOC_EXPBUF once support for that has been added to vb2 +- The SDR radio should use the same 'frequencies' for stations as the normal + radio receiver, and give back noise if the frequency doesn't match up with + a station frequency +- Improve the sine generation of the SDR radio. +- Make a thread for the RDS generation, that would help in particular for the + "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated + in real-time.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index beae3fd..7610eaa 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt
@@ -1901,6 +1901,8 @@ PPC | KVM_REG_PPC_ARCH_COMPAT | 32 PPC | KVM_REG_PPC_DABRX | 32 PPC | KVM_REG_PPC_WORT | 64 + PPC | KVM_REG_PPC_SPRG9 | 64 + PPC | KVM_REG_PPC_DBSR | 32 PPC | KVM_REG_PPC_TM_GPR0 | 64 ... PPC | KVM_REG_PPC_TM_GPR31 | 64 @@ -2565,6 +2567,120 @@ calls by the guest for that service will be passed to userspace to be handled. +4.87 KVM_SET_GUEST_DEBUG + +Capability: KVM_CAP_SET_GUEST_DEBUG +Architectures: x86, s390, ppc +Type: vcpu ioctl +Parameters: struct kvm_guest_debug (in) +Returns: 0 on success; -1 on error + +struct kvm_guest_debug { + __u32 control; + __u32 pad; + struct kvm_guest_debug_arch arch; +}; + +Set up the processor specific debug registers and configure vcpu for +handling guest debug events. There are two parts to the structure, the +first a control bitfield indicates the type of debug events to handle +when running. Common control bits are: + + - KVM_GUESTDBG_ENABLE: guest debugging is enabled + - KVM_GUESTDBG_SINGLESTEP: the next run should single-step + +The top 16 bits of the control field are architecture specific control +flags which can include the following: + + - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86] + - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390] + - KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86] + - KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86] + - KVM_GUESTDBG_EXIT_PENDING: trigger an immediate guest exit [s390] + +For example KVM_GUESTDBG_USE_SW_BP indicates that software breakpoints +are enabled in memory so we need to ensure breakpoint exceptions are +correctly trapped and the KVM run loop exits at the breakpoint and not +running off into the normal guest vector. For KVM_GUESTDBG_USE_HW_BP +we need to ensure the guest vCPUs architecture specific registers are +updated to the correct (supplied) values. + +The second part of the structure is architecture specific and +typically contains a set of debug registers. + +When debug events exit the main run loop with the reason +KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run +structure containing architecture specific debug information. + +4.88 KVM_GET_EMULATED_CPUID + +Capability: KVM_CAP_EXT_EMUL_CPUID +Architectures: x86 +Type: system ioctl +Parameters: struct kvm_cpuid2 (in/out) +Returns: 0 on success, -1 on error + +struct kvm_cpuid2 { + __u32 nent; + __u32 flags; + struct kvm_cpuid_entry2 entries[0]; +}; + +The member 'flags' is used for passing flags from userspace. + +#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0) +#define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1) +#define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2) + +struct kvm_cpuid_entry2 { + __u32 function; + __u32 index; + __u32 flags; + __u32 eax; + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 padding[3]; +}; + +This ioctl returns x86 cpuid features which are emulated by +kvm.Userspace can use the information returned by this ioctl to query +which features are emulated by kvm instead of being present natively. + +Userspace invokes KVM_GET_EMULATED_CPUID by passing a kvm_cpuid2 +structure with the 'nent' field indicating the number of entries in +the variable-size array 'entries'. If the number of entries is too low +to describe the cpu capabilities, an error (E2BIG) is returned. If the +number is too high, the 'nent' field is adjusted and an error (ENOMEM) +is returned. If the number is just right, the 'nent' field is adjusted +to the number of valid entries in the 'entries' array, which is then +filled. + +The entries returned are the set CPUID bits of the respective features +which kvm emulates, as returned by the CPUID instruction, with unknown +or unsupported feature bits cleared. + +Features like x2apic, for example, may not be present in the host cpu +but are exposed by kvm in KVM_GET_SUPPORTED_CPUID because they can be +emulated efficiently and thus not included here. + +The fields in each entry are defined as follows: + + function: the eax value used to obtain the entry + index: the ecx value used to obtain the entry (for entries that are + affected by ecx) + flags: an OR of zero or more of the following: + KVM_CPUID_FLAG_SIGNIFCANT_INDEX: + if the index field is valid + KVM_CPUID_FLAG_STATEFUL_FUNC: + if cpuid for this function returns different values for successive + invocations; there will be several entries with the same function, + all with this flag set + KVM_CPUID_FLAG_STATE_READ_NEXT: + for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is + the first entry to be read by a cpu + eax, ebx, ecx, edx: the values returned by the cpuid instruction for + this function/index combination 5. The kvm_run structure ------------------------ @@ -2861,79 +2977,13 @@ and usually define the validity of a groups of registers. (e.g. one bit for general purpose registers) +Please note that the kernel is allowed to use the kvm_run structure as the +primary storage for certain register types. Therefore, the kernel may use the +values in kvm_run even if the corresponding bit in kvm_dirty_regs is not set. + }; -4.81 KVM_GET_EMULATED_CPUID - -Capability: KVM_CAP_EXT_EMUL_CPUID -Architectures: x86 -Type: system ioctl -Parameters: struct kvm_cpuid2 (in/out) -Returns: 0 on success, -1 on error - -struct kvm_cpuid2 { - __u32 nent; - __u32 flags; - struct kvm_cpuid_entry2 entries[0]; -}; - -The member 'flags' is used for passing flags from userspace. - -#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0) -#define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1) -#define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2) - -struct kvm_cpuid_entry2 { - __u32 function; - __u32 index; - __u32 flags; - __u32 eax; - __u32 ebx; - __u32 ecx; - __u32 edx; - __u32 padding[3]; -}; - -This ioctl returns x86 cpuid features which are emulated by -kvm.Userspace can use the information returned by this ioctl to query -which features are emulated by kvm instead of being present natively. - -Userspace invokes KVM_GET_EMULATED_CPUID by passing a kvm_cpuid2 -structure with the 'nent' field indicating the number of entries in -the variable-size array 'entries'. If the number of entries is too low -to describe the cpu capabilities, an error (E2BIG) is returned. If the -number is too high, the 'nent' field is adjusted and an error (ENOMEM) -is returned. If the number is just right, the 'nent' field is adjusted -to the number of valid entries in the 'entries' array, which is then -filled. - -The entries returned are the set CPUID bits of the respective features -which kvm emulates, as returned by the CPUID instruction, with unknown -or unsupported feature bits cleared. - -Features like x2apic, for example, may not be present in the host cpu -but are exposed by kvm in KVM_GET_SUPPORTED_CPUID because they can be -emulated efficiently and thus not included here. - -The fields in each entry are defined as follows: - - function: the eax value used to obtain the entry - index: the ecx value used to obtain the entry (for entries that are - affected by ecx) - flags: an OR of zero or more of the following: - KVM_CPUID_FLAG_SIGNIFCANT_INDEX: - if the index field is valid - KVM_CPUID_FLAG_STATEFUL_FUNC: - if cpuid for this function returns different values for successive - invocations; there will be several entries with the same function, - all with this flag set - KVM_CPUID_FLAG_STATE_READ_NEXT: - for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is - the first entry to be read by a cpu - eax, ebx, ecx, edx: the values returned by the cpuid instruction for - this function/index combination - 6. Capabilities that can be enabled on vCPUs --------------------------------------------
diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt index 7f4e91b..df8b0c7 100644 --- a/Documentation/virtual/kvm/devices/arm-vgic.txt +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt
@@ -71,3 +71,13 @@ Errors: -ENODEV: Getting or setting this register is not yet supported -EBUSY: One or more VCPUs are running + + KVM_DEV_ARM_VGIC_GRP_NR_IRQS + Attributes: + A value describing the number of interrupts (SGI, PPI and SPI) for + this GIC instance, ranging from 64 to 1024, in increments of 32. + + Errors: + -EINVAL: Value set is out of the expected range + -EBUSY: Value has already be set, or GIC has already been initialized + with default values.
diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt index 2908941..53838d9 100644 --- a/Documentation/virtual/kvm/mmu.txt +++ b/Documentation/virtual/kvm/mmu.txt
@@ -425,6 +425,20 @@ Since only 19 bits are used to store generation-number on mmio spte, all pages are zapped when there is an overflow. +Unfortunately, a single memory access might access kvm_memslots(kvm) multiple +times, the last one happening when the generation number is retrieved and +stored into the MMIO spte. Thus, the MMIO spte might be created based on +out-of-date information, but with an up-to-date generation number. + +To avoid this, the generation number is incremented again after synchronize_srcu +returns; thus, the low bit of kvm_memslots(kvm)->generation is only 1 during a +memslot update, while some SRCU readers might be using the old copy. We do not +want to use an MMIO sptes created with an odd generation number, and we can do +this without losing a bit in the MMIO spte. The low bit of the generation +is not stored in MMIO spte, and presumed zero when it is extracted out of the +spte. If KVM is unlucky and creates an MMIO spte while the low bit is 1, +the next access to the spte will always be a cache miss. + Further reading ===============
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index bdd4bb9..b64e0af 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt
@@ -274,7 +274,7 @@ /mnt/huge. Any files created on /mnt/huge uses huge pages. The uid and gid options sets the owner and group of the root of the file system. By default the uid and gid of the current process are taken. The mode option sets the -mode of root of file system to value & 0777. This value is given in octal. +mode of root of file system to value & 01777. This value is given in octal. By default the value 0755 is picked. The size option sets the maximum value of memory (huge pages) allowed for that filesystem (/mnt/huge). The size is rounded down to HPAGE_SIZE. The option nr_inodes sets the maximum number of
diff --git a/Documentation/watchdog/Makefile b/Documentation/watchdog/Makefile new file mode 100644 index 0000000..6018f45 --- /dev/null +++ b/Documentation/watchdog/Makefile
@@ -0,0 +1 @@ +subdir-y := src
diff --git a/Documentation/watchdog/src/Makefile b/Documentation/watchdog/src/Makefile index 40e5f46..4a892c3 100644 --- a/Documentation/watchdog/src/Makefile +++ b/Documentation/watchdog/src/Makefile
@@ -1,6 +1,3 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - # List of programs to build hostprogs-y := watchdog-simple watchdog-test
diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt index afe68dd..052ee64 100644 --- a/Documentation/x86/x86_64/mm.txt +++ b/Documentation/x86/x86_64/mm.txt
@@ -5,7 +5,7 @@ 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm hole caused by [48:63] sign extension -ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole +ffff800000000000 - ffff87ffffffffff (=43 bits) guard hole, reserved for hypervisor ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
diff --git a/drivers/staging/xillybus/README b/Documentation/xillybus.txt similarity index 100% rename from drivers/staging/xillybus/README rename to Documentation/xillybus.txt
diff --git a/MAINTAINERS b/MAINTAINERS index 809ecd6..1cfabdd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS
@@ -152,8 +152,9 @@ 6LOWPAN GENERIC (BTLE/IEEE 802.15.4) M: Alexander Aring <alex.aring@gmail.com> -L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) +M: Jukka Rissanen <jukka.rissanen@linux.intel.com> L: linux-bluetooth@vger.kernel.org +L: linux-wpan@vger.kernel.org S: Maintained F: net/6lowpan/ F: include/net/6lowpan.h @@ -563,7 +564,7 @@ F: arch/alpha/ ALTERA TRIPLE SPEED ETHERNET DRIVER -M: Vince Bridgers <vbridgers2013@gmail.com> +M: Vince Bridgers <vbridger@opensource.altera.com> L: netdev@vger.kernel.org L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers) S: Maintained @@ -685,6 +686,17 @@ W: http://blackfin.uclinux.org/ S: Supported F: sound/soc/blackfin/* + +ANALOG DEVICES INC IIO DRIVERS +M: Lars-Peter Clausen <lars@metafoo.de> +M: Michael Hennerich <Michael.Hennerich@analog.com> +W: http://wiki.analog.com/ +W: http://ez.analog.com/community/linux-device-drivers +S: Supported +F: drivers/iio/*/ad* +X: drivers/iio/*/adjd* +F: drivers/staging/iio/*/ad* +F: staging/iio/trigger/iio-trig-bfin-timer.c AOA (Apple Onboard Audio) ALSA DRIVER M: Johannes Berg <johannes@sipsolutions.net> @@ -722,7 +734,6 @@ APPLIED MICRO (APM) X-GENE SOC ETHERNET DRIVER M: Iyappan Subramanian <isubramanian@apm.com> M: Keyur Chudgar <kchudgar@apm.com> -M: Ravi Patel <rapatel@apm.com> S: Supported F: drivers/net/ethernet/apm/xgene/ F: Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -835,6 +846,12 @@ S: Maintained F: drivers/clk/sunxi/ +ARM/Amlogic MesonX SoC support +M: Carlo Caione <carlo@caione.org> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +N: meson[x68] + ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES M: Andrew Victor <linux@maxim.org.za> M: Nicolas Ferre <nicolas.ferre@atmel.com> @@ -861,10 +878,9 @@ F: arch/arm/mach-highbank/ ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT -M: Anton Vorontsov <anton@enomsg.org> +M: Krzysztof Halasa <khalasa@piap.pl> S: Maintained F: arch/arm/mach-cns3xxx/ -T: git git://git.infradead.org/users/cbou/linux-cns3xxx.git ARM/CIRRUS LOGIC CLPS711X ARM ARCHITECTURE M: Alexander Shiyan <shc_work@mail.ru> @@ -964,7 +980,7 @@ F: arch/arm/mach-footbridge/ ARM/FREESCALE IMX / MXC ARM ARCHITECTURE -M: Shawn Guo <shawn.guo@freescale.com> +M: Shawn Guo <shawn.guo@linaro.org> M: Sascha Hauer <kernel@pengutronix.de> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -1025,24 +1041,20 @@ ARM/INTEL IOP32X ARM ARCHITECTURE M: Lennert Buytenhek <kernel@wantstofly.org> -M: Dan Williams <dan.j.williams@intel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/INTEL IOP33X ARM ARCHITECTURE -M: Dan Williams <dan.j.williams@intel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained +S: Orphan ARM/INTEL IOP13XX ARM ARCHITECTURE M: Lennert Buytenhek <kernel@wantstofly.org> -M: Dan Williams <dan.j.williams@intel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/INTEL IQ81342EX MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> -M: Dan Williams <dan.j.williams@intel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -1053,7 +1065,7 @@ ARM/INTEL IXP4XX ARM ARCHITECTURE M: Imre Kaloz <kaloz@openwrt.org> -M: Krzysztof Halasa <khc@pm.waw.pl> +M: Krzysztof Halasa <khalasa@piap.pl> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-ixp4xx/ @@ -1067,7 +1079,6 @@ ARM/INTEL XSC3 (MANZANO) ARM CORE M: Lennert Buytenhek <kernel@wantstofly.org> -M: Dan Williams <dan.j.williams@intel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -1077,33 +1088,33 @@ S: Maintained ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-keystone/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-kernel@vger.kernel.org S: Maintained F: drivers/clk/keystone/ ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-kernel@vger.kernel.org S: Maintained F: drivers/clocksource/timer-keystone.c ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-kernel@vger.kernel.org S: Maintained F: drivers/power/reset/keystone-reset.c ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> L: linux-kernel@vger.kernel.org S: Maintained F: drivers/memory/*emif* @@ -1150,6 +1161,16 @@ S: Maintained F: arch/arm/mach-orion5x/ts78xx-* +ARM/Mediatek SoC support +M: Matthias Brugger <matthias.bgg@gmail.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/boot/dts/mt6* +F: arch/arm/boot/dts/mt8* +F: arch/arm/mach-mediatek/ +N: mtk +K: mediatek + ARM/MICREL KS8695 ARCHITECTURE M: Greg Ungerer <gerg@uclinux.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1317,8 +1338,7 @@ M: Kyungmin Park <kyungmin.park@samsung.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -F: arch/arm/mach-s5pv210/mach-aquila.c -F: arch/arm/mach-s5pv210/mach-goni.c +F: arch/arm/mach-s5pv210/ ARM/SAMSUNG S5P SERIES 2D GRAPHICS ACCELERATION (G2D) SUPPORT M: Kyungmin Park <kyungmin.park@samsung.com> @@ -1361,7 +1381,6 @@ F: arch/arm/configs/ape6evm_defconfig F: arch/arm/configs/armadillo800eva_defconfig F: arch/arm/configs/bockw_defconfig -F: arch/arm/configs/genmai_defconfig F: arch/arm/configs/koelsch_defconfig F: arch/arm/configs/kzm9g_defconfig F: arch/arm/configs/lager_defconfig @@ -1372,15 +1391,23 @@ F: drivers/sh/ ARM/SOCFPGA ARCHITECTURE -M: Dinh Nguyen <dinguyen@altera.com> +M: Dinh Nguyen <dinguyen@opensource.altera.com> S: Maintained F: arch/arm/mach-socfpga/ +W: http://www.rocketboards.org +T: git://git.rocketboards.org/linux-socfpga.git +T: git://git.rocketboards.org/linux-socfpga-next.git ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT -M: Dinh Nguyen <dinguyen@altera.com> +M: Dinh Nguyen <dinguyen@opensource.altera.com> S: Maintained F: drivers/clk/socfpga/ +ARM/SOCFPGA EDAC SUPPORT +M: Thor Thayer <tthayer@opensource.altera.com> +S: Maintained +F: drivers/edac/altera_edac. + ARM/STI ARCHITECTURE M: Srinivas Kandagatla <srinivas.kandagatla@gmail.com> M: Maxime Coquelin <maxime.coquelin@st.com> @@ -1392,12 +1419,17 @@ F: arch/arm/mach-sti/ F: arch/arm/boot/dts/sti* F: drivers/clocksource/arm_global_timer.c -F: drivers/reset/sti/ -F: drivers/pinctrl/pinctrl-st.c -F: drivers/media/rc/st_rc.c F: drivers/i2c/busses/i2c-st.c -F: drivers/tty/serial/st-asc.c +F: drivers/media/rc/st_rc.c F: drivers/mmc/host/sdhci-st.c +F: drivers/phy/phy-stih407-usb.c +F: drivers/phy/phy-stih41x-usb.c +F: drivers/pinctrl/pinctrl-st.c +F: drivers/reset/sti/ +F: drivers/tty/serial/st-asc.c +F: drivers/usb/dwc3/dwc3-st.c +F: drivers/usb/host/ehci-st.c +F: drivers/usb/host/ohci-st.c ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> @@ -1517,6 +1549,7 @@ S: Supported F: arch/arm/mach-zynq/ F: drivers/cpuidle/cpuidle-zynq.c +F: drivers/block/xsysace.c N: zynq N: xilinx F: drivers/clocksource/cadence_ttc_timer.c @@ -1562,9 +1595,9 @@ F: drivers/platform/x86/eeepc*.c ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API -M: Dan Williams <dan.j.williams@intel.com> +R: Dan Williams <dan.j.williams@intel.com> W: http://sourceforge.net/projects/xscaleiop -S: Maintained +S: Odd fixes F: Documentation/crypto/async-tx-api.txt F: crypto/async_tx/ F: drivers/dma/ @@ -1616,6 +1649,7 @@ S: Supported W: http://wireless.kernel.org/en/users/Drivers/wil6210 F: drivers/net/wireless/ath/wil6210/ +F: include/uapi/linux/wil6210_uapi.h CARL9170 LINUX COMMUNITY WIRELESS DRIVER M: Christian Lamparter <chunkeey@googlemail.com> @@ -1665,6 +1699,12 @@ S: Supported F: drivers/tty/serial/atmel_serial.c +ATMEL Audio ALSA driver +M: Bo Shen <voice.shen@atmel.com> +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Supported +F: sound/soc/atmel + ATMEL DMA DRIVER M: Nicolas Ferre <nicolas.ferre@atmel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1698,11 +1738,24 @@ S: Supported F: drivers/net/ethernet/cadence/ +ATMEL NAND DRIVER +M: Josh Wu <josh.wu@atmel.com> +L: linux-mtd@lists.infradead.org +S: Supported +F: drivers/mtd/nand/atmel_nand* + ATMEL SPI DRIVER M: Nicolas Ferre <nicolas.ferre@atmel.com> S: Supported F: drivers/spi/spi-atmel.* +ATMEL SSC DRIVER +M: Bo Shen <voice.shen@atmel.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Supported +F: drivers/misc/atmel-ssc.c +F: include/linux/atmel-ssc.h + ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS M: Nicolas Ferre <nicolas.ferre@atmel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2004,6 +2057,7 @@ BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE M: Christian Daudt <bcm@fixthebug.org> M: Matt Porter <mporter@linaro.org> +M: Florian Fainelli <f.fainelli@gmail.com> L: bcm-kernel-feedback-list@broadcom.com T: git git://github.com/broadcom/mach-bcm S: Maintained @@ -2015,17 +2069,14 @@ F: drivers/mmc/host/sdhci-bcm-kona.c F: drivers/clocksource/bcm_kona_timer.c -BROADCOM BCM2835 ARM ARCHICTURE +BROADCOM BCM2835 ARM ARCHITECTURE M: Stephen Warren <swarren@wwwdotorg.org> L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git S: Maintained -F: arch/arm/mach-bcm/board_bcm2835.c -F: arch/arm/boot/dts/bcm2835* -F: arch/arm/configs/bcm2835_defconfig -F: drivers/*/*bcm2835* +N: bcm2835 -BROADCOM BCM5301X ARM ARCHICTURE +BROADCOM BCM5301X ARM ARCHITECTURE M: Hauke Mehrtens <hauke@hauke-m.de> L: linux-arm-kernel@lists.infradead.org S: Maintained @@ -2033,6 +2084,14 @@ F: arch/arm/boot/dts/bcm5301x.dtsi F: arch/arm/boot/dts/bcm470* +BROADCOM BCM63XX ARM ARCHITECTURE +M: Florian Fainelli <f.fainelli@gmail.com> +L: linux-arm-kernel@lists.infradead.org +T: git git://git.github.com/brcm/linux.git +S: Maintained +F: arch/arm/mach-bcm/bcm63xx.c +F: arch/arm/include/debug/bcm63xx.S + BROADCOM BCM7XXX ARM ARCHITECTURE M: Marc Carino <marc.ceeeee@gmail.com> M: Brian Norris <computersforpeace@gmail.com> @@ -2098,7 +2157,7 @@ F: drivers/scsi/bfa/ BROCADE BNA 10 GIGABIT ETHERNET DRIVER -M: Rasesh Mody <rmody@brocade.com> +M: Rasesh Mody <rasesh.mody@qlogic.com> L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/brocade/bna/ @@ -2711,6 +2770,18 @@ S: Supported F: drivers/net/ethernet/chelsio/cxgb4vf/ +CXL (IBM Coherent Accelerator Processor Interface CAPI) DRIVER +M: Ian Munsie <imunsie@au1.ibm.com> +M: Michael Neuling <mikey@neuling.org> +L: linuxppc-dev@lists.ozlabs.org +S: Supported +F: drivers/misc/cxl/ +F: include/misc/cxl.h +F: include/uapi/misc/cxl.h +F: Documentation/powerpc/cxl.txt +F: Documentation/powerpc/cxl.txt +F: Documentation/ABI/testing/sysfs-class-cxl + STMMAC ETHERNET DRIVER M: Giuseppe Cavallaro <peppe.cavallaro@st.com> L: netdev@vger.kernel.org @@ -2848,6 +2919,7 @@ DESIGNWARE USB2 DRD IP DRIVER M: Paul Zimmerman <paulz@synopsys.com> L: linux-usb@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git S: Maintained F: drivers/usb/dwc2/ @@ -2859,6 +2931,13 @@ S: Maintained F: drivers/usb/dwc3/ +DEVICE COREDUMP (DEV_COREDUMP) +M: Johannes Berg <johannes@sipsolutions.net> +L: linux-kernel@vger.kernel.org +S: Maintained +F: drivers/base/devcoredump.c +F: include/linux/devcoredump.h + DEVICE FREQUENCY (DEVFREQ) M: MyungJoo Ham <myungjoo.ham@samsung.com> M: Kyungmin Park <kyungmin.park@samsung.com> @@ -2979,7 +3058,7 @@ S: Maintained L: linux-media@vger.kernel.org L: dri-devel@lists.freedesktop.org -L: linaro-mm-sig@lists.linaro.org +L: linaro-mm-sig@lists.linaro.org (moderated for non-subscribers) F: drivers/dma-buf/ F: include/linux/dma-buf* F: include/linux/reservation.h @@ -2989,13 +3068,11 @@ DMA GENERIC OFFLOAD ENGINE SUBSYSTEM M: Vinod Koul <vinod.koul@intel.com> -M: Dan Williams <dan.j.williams@intel.com> L: dmaengine@vger.kernel.org Q: https://patchwork.kernel.org/project/linux-dmaengine/list/ -S: Supported +S: Maintained F: drivers/dma/ F: include/linux/dma* -T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx.git T: git git://git.infradead.org/users/vkoul/slave-dma.git (slave-dma) DME1737 HARDWARE MONITOR DRIVER @@ -3012,9 +3089,8 @@ F: drivers/acpi/dock.c DOCUMENTATION -M: Randy Dunlap <rdunlap@infradead.org> +M: Jonathan Corbet <corbet@lwn.net> L: linux-doc@vger.kernel.org -T: quilt http://www.infradead.org/~rdunlap/Doc/patches/ S: Maintained F: Documentation/ X: Documentation/ABI/ @@ -3091,7 +3167,7 @@ F: Documentation/devicetree/bindings/panel/ INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets) -M: Daniel Vetter <daniel.vetter@ffwll.ch> +M: Daniel Vetter <daniel.vetter@intel.com> M: Jani Nikula <jani.nikula@linux.intel.com> L: intel-gfx@lists.freedesktop.org L: dri-devel@lists.freedesktop.org @@ -3551,6 +3627,11 @@ F: drivers/video/fbdev/s1d13xxxfb.c F: include/video/s1d13xxxfb.h +ET131X NETWORK DRIVER +M: Mark Einon <mark.einon@gmail.com> +S: Odd Fixes +F: drivers/net/ethernet/agere/ + ETHERNET BRIDGE M: Stephen Hemminger <stephen@networkplumber.org> L: bridge@lists.linux-foundation.org @@ -4172,6 +4253,16 @@ S: Odd Fixes F: drivers/tty/hvc/ +HACKRF MEDIA DRIVER +M: Antti Palosaari <crope@iki.fi> +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/hackrf/ + HARDWARE MONITORING M: Jean Delvare <jdelvare@suse.de> M: Guenter Roeck <linux@roeck-us.net> @@ -4215,9 +4306,8 @@ F: drivers/media/dvb-frontends/hd29l2* HEWLETT-PACKARD SMART2 RAID DRIVER -M: Chirag Kantharia <chirag.kantharia@hp.com> L: iss_storagedev@hp.com -S: Maintained +S: Orphan F: Documentation/blockdev/cpqarray.txt F: drivers/block/cpqarray.* @@ -4477,7 +4567,6 @@ L: linux-i2c@vger.kernel.org L: linux-acpi@vger.kernel.org S: Maintained -F: drivers/i2c/i2c-acpi.c I2C-TAOS-EVM DRIVER M: Jean Delvare <jdelvare@suse.de> @@ -4519,7 +4608,7 @@ F: drivers/crypto/nx/ IBM Power 842 compression accelerator -M: Nathan Fontenot <nfont@linux.vnet.ibm.com> +M: Dan Streetman <ddstreet@us.ibm.com> S: Supported F: drivers/crypto/nx/nx-842.c F: include/linux/nx842.h @@ -4597,13 +4686,14 @@ IEEE 802.15.4 SUBSYSTEM M: Alexander Aring <alex.aring@gmail.com> -L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) -W: http://apps.sourceforge.net/trac/linux-zigbee -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git +L: linux-wpan@vger.kernel.org +W: https://github.com/linux-wpan +T: git git://github.com/linux-wpan/linux-wpan-next.git S: Maintained F: net/ieee802154/ F: net/mac802154/ F: drivers/net/ieee802154/ +F: Documentation/networking/ieee802154.txt IGUANAWORKS USB IR TRANSCEIVER M: Sean Young <sean@mess.org> @@ -4613,6 +4703,9 @@ IIO SUBSYSTEM AND DRIVERS M: Jonathan Cameron <jic23@kernel.org> +R: Hartmut Knaack <knaack.h@gmx.de> +R: Lars-Peter Clausen <lars@metafoo.de> +R: Peter Meerwald <pmeerw@pmeerw.net> L: linux-iio@vger.kernel.org S: Maintained F: drivers/iio/ @@ -4750,8 +4843,8 @@ F: arch/x86/kernel/cpu/microcode/intel* INTEL I/OAT DMA DRIVER -M: Dan Williams <dan.j.williams@intel.com> M: Dave Jiang <dave.jiang@intel.com> +R: Dan Williams <dan.j.williams@intel.com> L: dmaengine@vger.kernel.org Q: https://patchwork.kernel.org/project/linux-dmaengine/list/ S: Supported @@ -4766,12 +4859,12 @@ F: include/linux/intel-iommu.h INTEL IOP-ADMA DMA DRIVER -M: Dan Williams <dan.j.williams@intel.com> +R: Dan Williams <dan.j.williams@intel.com> S: Odd fixes F: drivers/dma/iop-adma.c INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT -M: Krzysztof Halasa <khc@pm.waw.pl> +M: Krzysztof Halasa <khalasa@piap.pl> S: Maintained F: arch/arm/mach-ixp4xx/include/mach/qmgr.h F: arch/arm/mach-ixp4xx/include/mach/npe.h @@ -4785,14 +4878,14 @@ S: Maintained F: drivers/char/hw_random/ixp4xx-rng.c -INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf/i40e/i40evf) +INTEL ETHERNET DRIVERS (e100/e1000/e1000e/fm10k/igb/igbvf/ixgb/ixgbe/ixgbevf/i40e/i40evf) M: Jeff Kirsher <jeffrey.t.kirsher@intel.com> M: Jesse Brandeburg <jesse.brandeburg@intel.com> M: Bruce Allan <bruce.w.allan@intel.com> M: Carolyn Wyborny <carolyn.wyborny@intel.com> M: Don Skidmore <donald.c.skidmore@intel.com> M: Greg Rose <gregory.v.rose@intel.com> -M: Alex Duyck <alexander.h.duyck@intel.com> +M: Matthew Vick <matthew.vick@intel.com> M: John Ronciak <john.ronciak@intel.com> M: Mitch Williams <mitch.a.williams@intel.com> M: Linux NICS <linux.nics@intel.com> @@ -4981,6 +5074,7 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core T: git git://git.infradead.org/users/jcooper/linux.git irqchip/core +F: Documentation/devicetree/bindings/interrupt-controller/ F: drivers/irqchip/ IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY) @@ -5022,6 +5116,7 @@ ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR M: Or Gerlitz <ogerlitz@mellanox.com> +M: Sagi Grimberg <sagig@mellanox.com> M: Roi Dayan <roid@mellanox.com> L: linux-rdma@vger.kernel.org S: Supported @@ -5066,7 +5161,7 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/ T: git git://linuxtv.org/anttip/media_tree.git S: Maintained -F: drivers/media/tuners/tuner_it913x* +F: drivers/media/tuners/it913x* IVTV VIDEO4LINUX DRIVER M: Andy Walls <awalls@md.metrocast.net> @@ -5214,6 +5309,13 @@ F: include/linux/sunrpc/ F: include/uapi/linux/sunrpc/ +KERNEL SELFTEST FRAMEWORK +M: Shuah Khan <shuahkh@osg.samsung.com> +L: linux-api@vger.kernel.org +T: git git://git.kernel.org/pub/scm/shuah/linux-kselftest +S: Maintained +F: tools/testing/selftests + KERNEL VIRTUAL MACHINE (KVM) M: Gleb Natapov <gleb@kernel.org> M: Paolo Bonzini <pbonzini@redhat.com> @@ -5480,7 +5582,7 @@ LINUX FOR POWERPC EMBEDDED MPC5XXX M: Anatolij Gustschin <agust@denx.de> L: linuxppc-dev@lists.ozlabs.org -T: git git://git.denx.de/linux-2.6-agust.git +T: git git://git.denx.de/linux-denx-agust.git S: Maintained F: arch/powerpc/platforms/512x/ F: arch/powerpc/platforms/52xx/ @@ -5594,8 +5696,8 @@ L: linux-kernel@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking S: Maintained -F: Documentation/lockdep*.txt -F: Documentation/lockstat.txt +F: Documentation/locking/lockdep*.txt +F: Documentation/locking/lockstat.txt F: include/linux/lockdep.h F: kernel/locking/ @@ -5660,11 +5762,8 @@ S: Maintained M32R ARCHITECTURE -M: Hirokazu Takata <takata@linux-m32r.org> -L: linux-m32r@ml.linux-m32r.org (moderated for non-subscribers) -L: linux-m32r-ja@ml.linux-m32r.org (in Japanese) W: http://www.linux-m32r.org/ -S: Maintained +S: Orphan F: arch/m32r/ M68K ARCHITECTURE @@ -5742,6 +5841,14 @@ F: drivers/net/macvlan.c F: include/linux/if_macvlan.h +MAILBOX API +M: Jassi Brar <jassisinghbrar@gmail.com> +L: linux-kernel@vger.kernel.org +S: Maintained +F: drivers/mailbox/ +F: include/linux/mailbox_client.h +F: include/linux/mailbox_controller.h + MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7 M: Michael Kerrisk <mtk.manpages@gmail.com> W: http://www.kernel.org/doc/man-pages @@ -5898,6 +6005,7 @@ W: http://www.linux-mtd.infradead.org/ Q: http://patchwork.ozlabs.org/project/linux-mtd/list/ T: git git://git.infradead.org/linux-mtd.git +T: git git://git.infradead.org/l2-mtd.git S: Maintained F: drivers/mtd/ F: include/linux/mtd/ @@ -5915,6 +6023,15 @@ F: drivers/mcb/ F: include/linux/mcb.h +MEN F21BMC (Board Management Controller) +M: Andreas Werner <andreas.werner@men.de> +S: Supported +F: drivers/mfd/menf21bmc.c +F: drivers/watchdog/menf21bmc_wdt.c +F: drivers/leds/leds-menf21bmc.c +F: drivers/hwmon/menf21bmc_hwmon.c +F: Documentation/hwmon/menf21bmc + METAG ARCHITECTURE M: James Hogan <james.hogan@imgtec.com> L: linux-metag@vger.kernel.org @@ -6373,7 +6490,7 @@ M: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> M: Samuel Ortiz <sameo@linux.intel.com> L: linux-wireless@vger.kernel.org -L: linux-nfc@lists.01.org (moderated for non-subscribers) +L: linux-nfc@lists.01.org (subscribers-only) S: Supported F: net/nfc/ F: include/net/nfc/ @@ -6541,10 +6658,9 @@ F: drivers/mmc/host/omap.c OMAP HS MMC SUPPORT -M: Balaji T K <balajitk@ti.com> L: linux-mmc@vger.kernel.org L: linux-omap@vger.kernel.org -S: Maintained +S: Orphan F: drivers/mmc/host/omap_hsmmc.c OMAP RANDOM NUMBER GENERATOR SUPPORT @@ -6583,7 +6699,7 @@ OMAP GPIO DRIVER M: Javier Martinez Canillas <javier@dowhile0.org> -M: Santosh Shilimkar <santosh.shilimkar@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> M: Kevin Hilman <khilman@deeprootsystems.com> L: linux-omap@vger.kernel.org S: Maintained @@ -6721,7 +6837,7 @@ F: drivers/net/wireless/orinoco/ OSD LIBRARY and FILESYSTEM -M: Boaz Harrosh <bharrosh@panasas.com> +M: Boaz Harrosh <ooo@electrozaur.com> M: Benny Halevy <bhalevy@primarydata.com> L: osd-dev@open-osd.org W: http://open-osd.org @@ -6731,6 +6847,13 @@ F: include/scsi/osd_* F: fs/exofs/ +OVERLAYFS FILESYSTEM +M: Miklos Szeredi <miklos@szeredi.hu> +L: linux-fsdevel@vger.kernel.org +S: Supported +F: fs/overlayfs/* +F: Documentation/filesystems/overlayfs.txt + P54 WIRELESS DRIVER M: Christian Lamparter <chunkeey@googlemail.com> L: linux-wireless@vger.kernel.org @@ -6874,14 +6997,29 @@ F: arch/x86/pci/ F: arch/x86/kernel/quirks.c +PCI DRIVER FOR APPLIEDMICRO XGENE +M: Tanmay Inamdar <tinamdar@apm.com> +L: linux-pci@vger.kernel.org +L: linux-arm-kernel@lists.infradead.org +S: Maintained +F: Documentation/devicetree/bindings/pci/xgene-pci.txt +F: drivers/pci/host/pci-xgene.c + PCI DRIVER FOR IMX6 M: Richard Zhu <r65037@freescale.com> -M: Shawn Guo <shawn.guo@freescale.com> +M: Lucas Stach <l.stach@pengutronix.de> L: linux-pci@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: drivers/pci/host/*imx6* +PCI DRIVER FOR TI KEYSTONE +M: Murali Karicheri <m-karicheri2@ti.com> +L: linux-pci@vger.kernel.org +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: drivers/pci/host/*keystone* + PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support) M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> M: Jason Cooper <jason@lakedaemon.net> @@ -7284,6 +7422,14 @@ S: Maintained F: drivers/media/usb/pwc/* +PWM FAN DRIVER +M: Kamil Debski <k.debski@samsung.com> +L: lm-sensors@lm-sensors.org +S: Supported +F: Documentation/devicetree/bindings/hwmon/pwm-fan.txt +F: Documentation/hwmon/pwm-fan +F: drivers/hwmon/pwm-fan.c + PWM SUBSYSTEM M: Thierry Reding <thierry.reding@gmail.com> L: linux-pwm@vger.kernel.org @@ -7297,12 +7443,12 @@ F: include/linux/pwm_backlight.h PXA2xx/PXA3xx SUPPORT -M: Eric Miao <eric.y.miao@gmail.com> -M: Russell King <linux@arm.linux.org.uk> +M: Daniel Mack <daniel@zonque.org> M: Haojian Zhuang <haojian.zhuang@gmail.com> +M: Robert Jarzmik <robert.jarzmik@free.fr> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://github.com/hzhuang1/linux.git -T: git git://git.linaro.org/people/ycmiao/pxa-linux.git +T: git git://github.com/rjarzmik/linux.git S: Maintained F: arch/arm/mach-pxa/ F: drivers/pcmcia/pxa2xx* @@ -7379,15 +7525,15 @@ QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER M: Shahed Shaikh <shahed.shaikh@qlogic.com> -M: Dept-HSGLinuxNICDev@qlogic.com +M: Dept-GELinuxNICDev@qlogic.com L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/qlogic/qlcnic/ QLOGIC QLGE 10Gb ETHERNET DRIVER -M: Shahed Shaikh <shahed.shaikh@qlogic.com> -M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> -M: Ron Mercer <ron.mercer@qlogic.com> +M: Harish Patil <harish.patil@qlogic.com> +M: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> +M: Dept-GELinuxNICDev@qlogic.com M: linux-driver@qlogic.com L: netdev@vger.kernel.org S: Supported @@ -7490,13 +7636,12 @@ RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project -M: Ivo van Doorn <IvDoorn@gmail.com> +M: Stanislaw Gruszka <sgruszka@redhat.com> M: Helmut Schaa <helmut.schaa@googlemail.com> L: linux-wireless@vger.kernel.org L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git F: drivers/net/wireless/rt2x00/ RAMDISK RAM BLOCK DEVICE DRIVER @@ -7598,6 +7743,7 @@ REGISTER MAP ABSTRACTION M: Mark Brown <broonie@kernel.org> +L: linux-kernel@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git S: Supported F: drivers/base/regmap/ @@ -7866,7 +8012,6 @@ F: drivers/mfd/sec*.c F: drivers/regulator/s2m*.c F: drivers/regulator/s5m*.c -F: drivers/rtc/rtc-sec.c F: include/linux/mfd/samsung/ SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS @@ -7937,7 +8082,7 @@ M: Viresh Kumar <viresh.linux@gmail.com> M: Andy Shevchenko <andriy.shevchenko@linux.intel.com> S: Maintained -F: include/linux/dw_dmac.h +F: include/linux/platform_data/dma-dw.h F: drivers/dma/dw/ SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER @@ -8090,6 +8235,8 @@ SECURE COMPUTING M: Kees Cook <keescook@chromium.org> +R: Andy Lutomirski <luto@amacapital.net> +R: Will Drewry <wad@chromium.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git seccomp S: Supported F: kernel/seccomp.c @@ -8410,11 +8557,11 @@ F: Documentation/security/Smack.txt F: security/smack/ -SMARTREFLEX DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS) +DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS) M: Kevin Hilman <khilman@kernel.org> M: Nishanth Menon <nm@ti.com> S: Maintained -F: drivers/power/avs/smartreflex.c +F: drivers/power/avs/ F: include/linux/power/smartreflex.h L: linux-pm@vger.kernel.org @@ -8584,6 +8731,14 @@ F: sound/core/pcm_dmaengine.c F: sound/soc/soc-generic-dmaengine-pcm.c +SP2 MEDIA DRIVER +M: Olli Salonen <olli.salonen@iki.fi> +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +S: Maintained +F: drivers/media/dvb-frontends/sp2* + SPARC + UltraSPARC (sparc/sparc64) M: "David S. Miller" <davem@davemloft.net> L: sparclinux@vger.kernel.org @@ -8695,11 +8850,6 @@ S: Odd Fixes F: drivers/staging/comedi/ -STAGING - ET131X NETWORK DRIVER -M: Mark Einon <mark.einon@gmail.com> -S: Odd Fixes -F: drivers/staging/et131x/ - STAGING - FLARION FT1000 DRIVERS M: Marek Belisko <marek.belisko@gmail.com> S: Odd Fixes @@ -8717,6 +8867,14 @@ S: Odd Fixes F: drivers/staging/media/lirc/ +STAGING - LUSTRE PARALLEL FILESYSTEM +M: Oleg Drokin <oleg.drokin@intel.com> +M: Andreas Dilger <andreas.dilger@intel.com> +L: HPDD-discuss@lists.01.org (moderated for non-subscribers) +W: http://lustre.opensfs.org/ +S: Maintained +F: drivers/staging/lustre + STAGING - NVIDIA COMPLIANT EMBEDDED CONTROLLER INTERFACE (nvec) M: Julian Andres Klode <jak@jak-linux.org> M: Marc Dietrich <marvin24@gmx.de> @@ -9010,17 +9168,13 @@ TEGRA ARCHITECTURE SUPPORT M: Stephen Warren <swarren@wwwdotorg.org> M: Thierry Reding <thierry.reding@gmail.com> +M: Alexandre Courbot <gnurou@gmail.com> L: linux-tegra@vger.kernel.org Q: http://patchwork.ozlabs.org/project/linux-tegra/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git S: Supported N: [^a-z]tegra -TEGRA ASOC DRIVER -M: Stephen Warren <swarren@wwwdotorg.org> -S: Supported -F: sound/soc/tegra/ - TEGRA CLOCK DRIVER M: Peter De Schrijver <pdeschrijver@nvidia.com> M: Prashant Gaikwad <pgaikwad@nvidia.com> @@ -9032,11 +9186,6 @@ S: Supported F: drivers/dma/tegra20-apb-dma.c -TEGRA GPIO DRIVER -M: Stephen Warren <swarren@wwwdotorg.org> -S: Supported -F: drivers/gpio/gpio-tegra.c - TEGRA I2C DRIVER M: Laxman Dewangan <ldewangan@nvidia.com> S: Supported @@ -9053,11 +9202,6 @@ S: Supported F: drivers/input/keyboard/tegra-kbc.c -TEGRA PINCTRL DRIVER -M: Stephen Warren <swarren@wwwdotorg.org> -S: Supported -F: drivers/pinctrl/pinctrl-tegra* - TEGRA PWM DRIVER M: Thierry Reding <thierry.reding@gmail.com> S: Supported @@ -9148,6 +9292,15 @@ F: drivers/mmc/host/tifm_sd.c F: include/linux/tifm.h +TI KEYSTONE MULTICORE NAVIGATOR DRIVERS +M: Santosh Shilimkar <ssantosh@kernel.org> +L: linux-kernel@vger.kernel.org +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: drivers/soc/ti/* +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git + + TI LM49xxx FAMILY ASoC CODEC DRIVERS M: M R Swami Reddy <mr.swami.reddy@ti.com> M: Vishwas A Deshpande <vishwas.a.deshpande@ti.com> @@ -9289,6 +9442,14 @@ S: Odd fixes F: drivers/media/usb/tm6000/ +TW68 VIDEO4LINUX DRIVER +M: Hans Verkuil <hverkuil@xs4all.nl> +L: linux-media@vger.kernel.org +T: git git://linuxtv.org/media_tree.git +W: http://linuxtv.org +S: Odd Fixes +F: drivers/media/pci/tw68/ + TPM DEVICE DRIVER M: Peter Huewe <peterhuewe@gmx.de> M: Ashley Lai <ashley@ashleylai.com> @@ -9310,6 +9471,7 @@ F: include/linux/trace*.h F: include/trace/ F: kernel/trace/ +F: tools/testing/selftests/ftrace/ TRIVIAL PATCHES M: Jiri Kosina <trivial@kernel.org> @@ -9683,7 +9845,7 @@ M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> L: linux-usb@vger.kernel.org S: Maintained -F: drivers/usb/gadget/function/*uvc*.c +F: drivers/usb/gadget/function/*uvc* F: drivers/usb/gadget/legacy/webcam.c USB WIRELESS RNDIS DRIVER (rndis_wlan) @@ -9897,6 +10059,7 @@ VOLTAGE AND CURRENT REGULATOR FRAMEWORK M: Liam Girdwood <lgirdwood@gmail.com> M: Mark Brown <broonie@kernel.org> +L: linux-kernel@vger.kernel.org W: http://opensource.wolfsonmicro.com/node/15 W: http://www.slimlogic.co.uk/?p=48 T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git @@ -10156,6 +10319,15 @@ F: drivers/block/xen-blkback/* F: drivers/block/xen* +XEN PVSCSI DRIVERS +M: Juergen Gross <jgross@suse.com> +L: xen-devel@lists.xenproject.org (moderated for non-subscribers) +L: linux-scsi@vger.kernel.org +S: Supported +F: drivers/scsi/xen-scsifront.c +F: drivers/xen/xen-scsiback.c +F: include/xen/interface/io/vscsiif.h + XEN SWIOTLB SUBSYSTEM M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> L: xen-devel@lists.xenproject.org (moderated for non-subscribers) @@ -10180,16 +10352,18 @@ S: Maintained F: drivers/net/ethernet/xilinx/xilinx_axienet* -XILINX SYSTEMACE DRIVER -S: Orphan -F: drivers/block/xsysace.c - XILINX UARTLITE SERIAL DRIVER M: Peter Korsgaard <jacmet@sunsite.dk> L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial/uartlite.c +XILLYBUS DRIVER +M: Eli Billauer <eli.billauer@gmail.com> +L: linux-kernel@vger.kernel.org +S: Supported +F: drivers/char/xillybus/ + XTENSA XTFPGA PLATFORM SUPPORT M: Max Filippov <jcmvbkbc@gmail.com> L: linux-xtensa@linux-xtensa.org
diff --git a/Makefile b/Makefile index 036b733..52c1297 100644 --- a/Makefile +++ b/Makefile
@@ -1,7 +1,7 @@ VERSION = 3 -PATCHLEVEL = 17 +PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc2 NAME = Shuffling Zombie Juror # *DOCUMENTATION* @@ -10,11 +10,9 @@ # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not: -# o use make's built-in rules and variables -# (this increases performance and avoids hard-to-debug behaviour); -# o print "Entering directory ..."; -MAKEFLAGS += -rR --no-print-directory +# Do not use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +MAKEFLAGS += -rR # Avoid funny character set dependencies unexport LC_ALL @@ -97,34 +95,6 @@ export quiet Q KBUILD_VERBOSE -# Call a source code checker (by default, "sparse") as part of the -# C compilation. -# -# Use 'make C=1' to enable checking of only re-compiled files. -# Use 'make C=2' to enable checking of *all* source files, regardless -# of whether they are re-compiled or not. -# -# See the file "Documentation/sparse.txt" for more details, including -# where to get the "sparse" utility. - -ifeq ("$(origin C)", "command line") - KBUILD_CHECKSRC = $(C) -endif -ifndef KBUILD_CHECKSRC - KBUILD_CHECKSRC = 0 -endif - -# Use make M=dir to specify directory of external module to build -# Old syntax make ... SUBDIRS=$PWD is still supported -# Setting the environment variable KBUILD_EXTMOD take precedence -ifdef SUBDIRS - KBUILD_EXTMOD ?= $(SUBDIRS) -endif - -ifeq ("$(origin M)", "command line") - KBUILD_EXTMOD := $(M) -endif - # kbuild supports saving output files in a separate directory. # To locate output files in a separate directory two syntaxes are supported. # In both cases the working directory must be the root of the kernel src. @@ -140,7 +110,6 @@ # The O= assignment takes precedence over the KBUILD_OUTPUT environment # variable. - # KBUILD_SRC is set on invocation of make in OBJ directory # KBUILD_SRC is not intended to be used by the regular user (for now) ifeq ($(KBUILD_SRC),) @@ -172,17 +141,9 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make @: -# Fake the "Entering directory" message once, so that IDEs/editors are -# able to understand relative filenames. - echodir := @echo - quiet_echodir := @echo -silent_echodir := @: sub-make: FORCE - $($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'" - $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ - KBUILD_SRC=$(CURDIR) \ - KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ - $(filter-out _all sub-make,$(MAKECMDGOALS)) + $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ + -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) # Leave processing to above invocation of make skip-makefile := 1 @@ -192,6 +153,39 @@ # We process the rest of the Makefile if this is the final invocation of make ifeq ($(skip-makefile),) +# Do not print "Entering directory ...", +# but we want to display it when entering to the output directory +# so that IDEs/editors are able to understand relative filenames. +MAKEFLAGS += --no-print-directory + +# Call a source code checker (by default, "sparse") as part of the +# C compilation. +# +# Use 'make C=1' to enable checking of only re-compiled files. +# Use 'make C=2' to enable checking of *all* source files, regardless +# of whether they are re-compiled or not. +# +# See the file "Documentation/sparse.txt" for more details, including +# where to get the "sparse" utility. + +ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) +endif +ifndef KBUILD_CHECKSRC + KBUILD_CHECKSRC = 0 +endif + +# Use make M=dir to specify directory of external module to build +# Old syntax make ... SUBDIRS=$PWD is still supported +# Setting the environment variable KBUILD_EXTMOD take precedence +ifdef SUBDIRS + KBUILD_EXTMOD ?= $(SUBDIRS) +endif + +ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) +endif + # If building an external module we do not care about the all: rule # but instead _all depend on modules PHONY += all @@ -842,6 +836,21 @@ endif # INSTALL_MOD_STRIP export mod_strip_cmd +# CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP +# or CONFIG_MODULE_COMPRESS_XZ. + +mod_compress_cmd = true +ifdef CONFIG_MODULE_COMPRESS + ifdef CONFIG_MODULE_COMPRESS_GZIP + mod_compress_cmd = gzip -n + endif # CONFIG_MODULE_COMPRESS_GZIP + ifdef CONFIG_MODULE_COMPRESS_XZ + mod_compress_cmd = xz + endif # CONFIG_MODULE_COMPRESS_XZ +endif # CONFIG_MODULE_COMPRESS +export mod_compress_cmd + # Select initial ramdisk compression format, default is gzip(1). # This shall be used by the dracut(8) tool while creating an initramfs image. # @@ -874,9 +883,7 @@ $(net-y) $(net-m) $(libs-y) $(libs-m))) vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ - $(init-n) $(init-) \ - $(core-n) $(core-) $(drivers-n) $(drivers-) \ - $(net-n) $(net-) $(libs-n) $(libs-)))) + $(init-) $(core-) $(drivers-) $(net-) $(libs-)))) init-y := $(patsubst %/, %/built-in.o, $(init-y)) core-y := $(patsubst %/, %/built-in.o, $(core-y)) @@ -1532,6 +1539,8 @@ $(cmd_crmodverdir) $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ $(build)=$(build-dir) +# Make sure the latest headers are built for Documentation +Documentation/: headers_install %/: prepare scripts FORCE $(cmd_crmodverdir) $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ @@ -1574,7 +1583,7 @@ # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir # Usage: # $(Q)$(MAKE) $(clean)=dir -clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj +clean := -f $(srctree)/scripts/Makefile.clean obj endif # skip-makefile
diff --git a/arch/Kconfig b/arch/Kconfig index 0eae9df..05d7a8a 100644 --- a/arch/Kconfig +++ b/arch/Kconfig
@@ -323,6 +323,17 @@ results in the system call being skipped immediately. - seccomp syscall wired up + For best performance, an arch should use seccomp_phase1 and + seccomp_phase2 directly. It should call seccomp_phase1 for all + syscalls if TIF_SECCOMP is set, but seccomp_phase1 does not + need to be called from a ptrace-safe context. It must then + call seccomp_phase2 if seccomp_phase1 returns anything other + than SECCOMP_PHASE1_OK or SECCOMP_PHASE1_SKIP. + + As an additional optimization, an arch may provide seccomp_data + directly to seccomp_phase1; this avoids multiple calls + to the syscall_xyz helpers for every syscall. + config SECCOMP_FILTER def_bool y depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild index e858aa0..25b4972 100644 --- a/arch/alpha/include/asm/Kbuild +++ b/arch/alpha/include/asm/Kbuild
@@ -4,7 +4,9 @@ generic-y += cputime.h generic-y += exec.h generic-y += hash.h +generic-y += irq_work.h generic-y += mcs_spinlock.h generic-y += preempt.h generic-y += scatterlist.h +generic-y += sections.h generic-y += trace_clock.h
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index ed60a1e..8f8eafb 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h
@@ -17,8 +17,8 @@ #define ATOMIC_INIT(i) { (i) } #define ATOMIC64_INIT(i) { (i) } -#define atomic_read(v) (*(volatile int *)&(v)->counter) -#define atomic64_read(v) (*(volatile long *)&(v)->counter) +#define atomic_read(v) ACCESS_ONCE((v)->counter) +#define atomic64_read(v) ACCESS_ONCE((v)->counter) #define atomic_set(v,i) ((v)->counter = (i)) #define atomic64_set(v,i) ((v)->counter = (i)) @@ -29,145 +29,92 @@ * branch back to restart the operation. */ -static __inline__ void atomic_add(int i, atomic_t * v) -{ - unsigned long temp; - __asm__ __volatile__( - "1: ldl_l %0,%1\n" - " addl %0,%2,%0\n" - " stl_c %0,%1\n" - " beq %0,2f\n" - ".subsection 2\n" - "2: br 1b\n" - ".previous" - :"=&r" (temp), "=m" (v->counter) - :"Ir" (i), "m" (v->counter)); +#define ATOMIC_OP(op) \ +static __inline__ void atomic_##op(int i, atomic_t * v) \ +{ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "1: ldl_l %0,%1\n" \ + " " #op "l %0,%2,%0\n" \ + " stl_c %0,%1\n" \ + " beq %0,2f\n" \ + ".subsection 2\n" \ + "2: br 1b\n" \ + ".previous" \ + :"=&r" (temp), "=m" (v->counter) \ + :"Ir" (i), "m" (v->counter)); \ +} \ + +#define ATOMIC_OP_RETURN(op) \ +static inline int atomic_##op##_return(int i, atomic_t *v) \ +{ \ + long temp, result; \ + smp_mb(); \ + __asm__ __volatile__( \ + "1: ldl_l %0,%1\n" \ + " " #op "l %0,%3,%2\n" \ + " " #op "l %0,%3,%0\n" \ + " stl_c %0,%1\n" \ + " beq %0,2f\n" \ + ".subsection 2\n" \ + "2: br 1b\n" \ + ".previous" \ + :"=&r" (temp), "=m" (v->counter), "=&r" (result) \ + :"Ir" (i), "m" (v->counter) : "memory"); \ + smp_mb(); \ + return result; \ } -static __inline__ void atomic64_add(long i, atomic64_t * v) -{ - unsigned long temp; - __asm__ __volatile__( - "1: ldq_l %0,%1\n" - " addq %0,%2,%0\n" - " stq_c %0,%1\n" - " beq %0,2f\n" - ".subsection 2\n" - "2: br 1b\n" - ".previous" - :"=&r" (temp), "=m" (v->counter) - :"Ir" (i), "m" (v->counter)); +#define ATOMIC64_OP(op) \ +static __inline__ void atomic64_##op(long i, atomic64_t * v) \ +{ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "1: ldq_l %0,%1\n" \ + " " #op "q %0,%2,%0\n" \ + " stq_c %0,%1\n" \ + " beq %0,2f\n" \ + ".subsection 2\n" \ + "2: br 1b\n" \ + ".previous" \ + :"=&r" (temp), "=m" (v->counter) \ + :"Ir" (i), "m" (v->counter)); \ +} \ + +#define ATOMIC64_OP_RETURN(op) \ +static __inline__ long atomic64_##op##_return(long i, atomic64_t * v) \ +{ \ + long temp, result; \ + smp_mb(); \ + __asm__ __volatile__( \ + "1: ldq_l %0,%1\n" \ + " " #op "q %0,%3,%2\n" \ + " " #op "q %0,%3,%0\n" \ + " stq_c %0,%1\n" \ + " beq %0,2f\n" \ + ".subsection 2\n" \ + "2: br 1b\n" \ + ".previous" \ + :"=&r" (temp), "=m" (v->counter), "=&r" (result) \ + :"Ir" (i), "m" (v->counter) : "memory"); \ + smp_mb(); \ + return result; \ } -static __inline__ void atomic_sub(int i, atomic_t * v) -{ - unsigned long temp; - __asm__ __volatile__( - "1: ldl_l %0,%1\n" - " subl %0,%2,%0\n" - " stl_c %0,%1\n" - " beq %0,2f\n" - ".subsection 2\n" - "2: br 1b\n" - ".previous" - :"=&r" (temp), "=m" (v->counter) - :"Ir" (i), "m" (v->counter)); -} +#define ATOMIC_OPS(opg) \ + ATOMIC_OP(opg) \ + ATOMIC_OP_RETURN(opg) \ + ATOMIC64_OP(opg) \ + ATOMIC64_OP_RETURN(opg) -static __inline__ void atomic64_sub(long i, atomic64_t * v) -{ - unsigned long temp; - __asm__ __volatile__( - "1: ldq_l %0,%1\n" - " subq %0,%2,%0\n" - " stq_c %0,%1\n" - " beq %0,2f\n" - ".subsection 2\n" - "2: br 1b\n" - ".previous" - :"=&r" (temp), "=m" (v->counter) - :"Ir" (i), "m" (v->counter)); -} +ATOMIC_OPS(add) +ATOMIC_OPS(sub) - -/* - * Same as above, but return the result value - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - long temp, result; - smp_mb(); - __asm__ __volatile__( - "1: ldl_l %0,%1\n" - " addl %0,%3,%2\n" - " addl %0,%3,%0\n" - " stl_c %0,%1\n" - " beq %0,2f\n" - ".subsection 2\n" - "2: br 1b\n" - ".previous" - :"=&r" (temp), "=m" (v->counter), "=&r" (result) - :"Ir" (i), "m" (v->counter) : "memory"); - smp_mb(); - return result; -} - -static __inline__ long atomic64_add_return(long i, atomic64_t * v) -{ - long temp, result; - smp_mb(); - __asm__ __volatile__( - "1: ldq_l %0,%1\n" - " addq %0,%3,%2\n" - " addq %0,%3,%0\n" - " stq_c %0,%1\n" - " beq %0,2f\n" - ".subsection 2\n" - "2: br 1b\n" - ".previous" - :"=&r" (temp), "=m" (v->counter), "=&r" (result) - :"Ir" (i), "m" (v->counter) : "memory"); - smp_mb(); - return result; -} - -static __inline__ long atomic_sub_return(int i, atomic_t * v) -{ - long temp, result; - smp_mb(); - __asm__ __volatile__( - "1: ldl_l %0,%1\n" - " subl %0,%3,%2\n" - " subl %0,%3,%0\n" - " stl_c %0,%1\n" - " beq %0,2f\n" - ".subsection 2\n" - "2: br 1b\n" - ".previous" - :"=&r" (temp), "=m" (v->counter), "=&r" (result) - :"Ir" (i), "m" (v->counter) : "memory"); - smp_mb(); - return result; -} - -static __inline__ long atomic64_sub_return(long i, atomic64_t * v) -{ - long temp, result; - smp_mb(); - __asm__ __volatile__( - "1: ldq_l %0,%1\n" - " subq %0,%3,%2\n" - " subq %0,%3,%0\n" - " stq_c %0,%1\n" - " beq %0,2f\n" - ".subsection 2\n" - "2: br 1b\n" - ".previous" - :"=&r" (temp), "=m" (v->counter), "=&r" (result) - :"Ir" (i), "m" (v->counter) : "memory"); - smp_mb(); - return result; -} +#undef ATOMIC_OPS +#undef ATOMIC64_OP_RETURN +#undef ATOMIC64_OP +#undef ATOMIC_OP_RETURN +#undef ATOMIC_OP #define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
diff --git a/arch/alpha/include/asm/sections.h b/arch/alpha/include/asm/sections.h deleted file mode 100644 index 43b40ed..0000000 --- a/arch/alpha/include/asm/sections.h +++ /dev/null
@@ -1,7 +0,0 @@ -#ifndef _ALPHA_SECTIONS_H -#define _ALPHA_SECTIONS_H - -/* nothing to see, move along */ -#include <asm-generic/sections.h> - -#endif
diff --git a/arch/alpha/include/asm/syscall.h b/arch/alpha/include/asm/syscall.h new file mode 100644 index 0000000..88d28eb --- /dev/null +++ b/arch/alpha/include/asm/syscall.h
@@ -0,0 +1,11 @@ +#ifndef _ASM_ALPHA_SYSCALL_H +#define _ASM_ALPHA_SYSCALL_H + +#include <uapi/linux/audit.h> + +static inline int syscall_get_arch(void) +{ + return AUDIT_ARCH_ALPHA; +} + +#endif /* _ASM_ALPHA_SYSCALL_H */
diff --git a/arch/alpha/include/uapi/asm/ioctls.h b/arch/alpha/include/uapi/asm/ioctls.h index 92c557b..f30c94a 100644 --- a/arch/alpha/include/uapi/asm/ioctls.h +++ b/arch/alpha/include/uapi/asm/ioctls.h
@@ -90,6 +90,8 @@ #define TIOCSBRK 0x5427 /* BSD compatibility */ #define TIOCCBRK 0x5428 /* BSD compatibility */ #define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TIOCGRS485 _IOR('T', 0x2E, struct serial_rs485) +#define TIOCSRS485 _IOWR('T', 0x2F, struct serial_rs485) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 1402fcc..f9c732e 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c
@@ -446,7 +446,8 @@ * unhappy with OSF UFS. [CHECKME] */ static int -osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags) +osf_ufs_mount(const char __user *dirname, + struct ufs_args __user *args, int flags) { int retval; struct cdfs_args tmp; @@ -466,7 +467,8 @@ } static int -osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags) +osf_cdfs_mount(const char __user *dirname, + struct cdfs_args __user *args, int flags) { int retval; struct cdfs_args tmp; @@ -486,7 +488,8 @@ } static int -osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags) +osf_procfs_mount(const char __user *dirname, + struct procfs_args __user *args, int flags) { struct procfs_args tmp; @@ -500,28 +503,22 @@ int, flag, void __user *, data) { int retval; - struct filename *name; - name = getname(path); - retval = PTR_ERR(name); - if (IS_ERR(name)) - goto out; switch (typenr) { case 1: - retval = osf_ufs_mount(name->name, data, flag); + retval = osf_ufs_mount(path, data, flag); break; case 6: - retval = osf_cdfs_mount(name->name, data, flag); + retval = osf_cdfs_mount(path, data, flag); break; case 9: - retval = osf_procfs_mount(name->name, data, flag); + retval = osf_procfs_mount(path, data, flag); break; default: retval = -EINVAL; printk("osf_mount(%ld, %x)\n", typenr, flag); } - putname(name); - out: + return retval; }
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c index c52e7f0..5c218aa 100644 --- a/arch/alpha/kernel/perf_event.c +++ b/arch/alpha/kernel/perf_event.c
@@ -431,7 +431,7 @@ */ static int alpha_pmu_add(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); struct hw_perf_event *hwc = &event->hw; int n0; int ret; @@ -483,7 +483,7 @@ */ static void alpha_pmu_del(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); struct hw_perf_event *hwc = &event->hw; unsigned long irq_flags; int j; @@ -531,7 +531,7 @@ static void alpha_pmu_stop(struct perf_event *event, int flags) { struct hw_perf_event *hwc = &event->hw; - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); if (!(hwc->state & PERF_HES_STOPPED)) { cpuc->idx_mask &= ~(1UL<<hwc->idx); @@ -551,7 +551,7 @@ static void alpha_pmu_start(struct perf_event *event, int flags) { struct hw_perf_event *hwc = &event->hw; - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED))) return; @@ -724,7 +724,7 @@ */ static void alpha_pmu_enable(struct pmu *pmu) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); if (cpuc->enabled) return; @@ -750,7 +750,7 @@ static void alpha_pmu_disable(struct pmu *pmu) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); if (!cpuc->enabled) return; @@ -814,8 +814,8 @@ struct hw_perf_event *hwc; int idx, j; - __get_cpu_var(irq_pmi_count)++; - cpuc = &__get_cpu_var(cpu_hw_events); + __this_cpu_inc(irq_pmi_count); + cpuc = this_cpu_ptr(&cpu_hw_events); /* Completely counting through the PMC's period to trigger a new PMC * overflow interrupt while in this interrupt routine is utterly
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c index 86d8351..d9ee817 100644 --- a/arch/alpha/kernel/ptrace.c +++ b/arch/alpha/kernel/ptrace.c
@@ -321,7 +321,7 @@ if (test_thread_flag(TIF_SYSCALL_TRACE) && tracehook_report_syscall_entry(current_pt_regs())) ret = -1UL; - audit_syscall_entry(AUDIT_ARCH_ALPHA, regs->r0, regs->r16, regs->r17, regs->r18, regs->r19); + audit_syscall_entry(regs->r0, regs->r16, regs->r17, regs->r18, regs->r19); return ret ?: current_pt_regs()->r0; }
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index ee39cee..643a9dc 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c
@@ -56,9 +56,9 @@ DEFINE_PER_CPU(u8, irq_work_pending); -#define set_irq_work_pending_flag() __get_cpu_var(irq_work_pending) = 1 -#define test_irq_work_pending() __get_cpu_var(irq_work_pending) -#define clear_irq_work_pending() __get_cpu_var(irq_work_pending) = 0 +#define set_irq_work_pending_flag() __this_cpu_write(irq_work_pending, 1) +#define test_irq_work_pending() __this_cpu_read(irq_work_pending) +#define clear_irq_work_pending() __this_cpu_write(irq_work_pending, 0) void arch_irq_work_raise(void) {
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 9596b0a..fe44b24 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig
@@ -9,6 +9,7 @@ config ARC def_bool y select BUILDTIME_EXTABLE_SORT + select COMMON_CLK select CLONE_BACKWARDS # ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev select DEVTMPFS if !INITRAMFS_SOURCE="" @@ -73,9 +74,6 @@ config HAVE_LATENCYTOP_SUPPORT def_bool y -config NO_DMA - def_bool n - source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -354,7 +352,7 @@ kernel mode. This saves memory access for each such access -config ARC_MISALIGN_ACCESS +config ARC_EMUL_UNALIGNED bool "Emulate unaligned memory access (userspace only)" select SYSCTL_ARCH_UNALIGN_NO_WARN select SYSCTL_ARCH_UNALIGN_ALLOW
diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 8c0b1aa..10bc3d4 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile
@@ -25,7 +25,6 @@ LINUXINCLUDE += -include ${src}/arch/arc/include/asm/current.h endif -upto_gcc42 := $(call cc-ifversion, -le, 0402, y) upto_gcc44 := $(call cc-ifversion, -le, 0404, y) atleast_gcc44 := $(call cc-ifversion, -ge, 0404, y) atleast_gcc48 := $(call cc-ifversion, -ge, 0408, y) @@ -60,25 +59,11 @@ # --build-id w/o "-marclinux". Default arc-elf32-ld is OK ldflags-$(upto_gcc44) += -marclinux -ARC_LIBGCC := -mA7 -cflags-$(CONFIG_ARC_HAS_HW_MPY) += -multcost=16 - ifndef CONFIG_ARC_HAS_HW_MPY cflags-y += -mno-mpy - -# newlib for ARC700 assumes MPY to be always present, which is generally true -# However, if someone really doesn't want MPY, we need to use the 600 ver -# which coupled with -mno-mpy will use mpy emulation -# With gcc 4.4.7, -mno-mpy is enough to make any other related adjustments, -# e.g. increased cost of MPY. With gcc 4.2.1 this had to be explicitly hinted - - ifeq ($(upto_gcc42),y) - ARC_LIBGCC := -marc600 - cflags-y += -multcost=30 - endif endif -LIBGCC := $(shell $(CC) $(ARC_LIBGCC) $(cflags-y) --print-libgcc-file-name) +LIBGCC := $(shell $(CC) $(cflags-y) --print-libgcc-file-name) # Modules with short calls might break for calls into builtin-kernel KBUILD_CFLAGS_MODULE += -mlong-calls
diff --git a/arch/arc/boot/dts/angel4.dts b/arch/arc/boot/dts/angel4.dts index 6b57475..757e0c6 100644 --- a/arch/arc/boot/dts/angel4.dts +++ b/arch/arc/boot/dts/angel4.dts
@@ -24,11 +24,6 @@ serial0 = &arcuart0; }; - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256M */ - }; - fpga { compatible = "simple-bus"; #address-cells = <1>;
diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts index 4f31b2e..cfaedd9 100644 --- a/arch/arc/boot/dts/nsimosci.dts +++ b/arch/arc/boot/dts/nsimosci.dts
@@ -20,18 +20,13 @@ /* this is for console on PGU */ /* bootargs = "console=tty0 consoleblank=0"; */ /* this is for console on serial */ - bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug"; + bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug"; }; aliases { serial0 = &uart0; }; - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256M */ - }; - fpga { compatible = "simple-bus"; #address-cells = <1>;
diff --git a/arch/arc/configs/fpga_defconfig b/arch/arc/configs/fpga_defconfig index e283aa5..ef4d3bc 100644 --- a/arch/arc/configs/fpga_defconfig +++ b/arch/arc/configs/fpga_defconfig
@@ -23,7 +23,6 @@ # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARC_PLAT_FPGA_LEGACY=y -CONFIG_ARC_BOARD_ML509=y # CONFIG_ARC_HAS_RTSC is not set CONFIG_ARC_BUILTIN_DTB_NAME="angel4" CONFIG_PREEMPT=y
diff --git a/arch/arc/configs/fpga_noramfs_defconfig b/arch/arc/configs/fpga_noramfs_defconfig index 5276a52..49c9301 100644 --- a/arch/arc/configs/fpga_noramfs_defconfig +++ b/arch/arc/configs/fpga_noramfs_defconfig
@@ -20,7 +20,6 @@ # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARC_PLAT_FPGA_LEGACY=y -CONFIG_ARC_BOARD_ML509=y # CONFIG_ARC_HAS_RTSC is not set CONFIG_ARC_BUILTIN_DTB_NAME="angel4" CONFIG_PREEMPT=y
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig index c01ba35..278dacf 100644 --- a/arch/arc/configs/nsimosci_defconfig +++ b/arch/arc/configs/nsimosci_defconfig
@@ -21,7 +21,6 @@ # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARC_PLAT_FPGA_LEGACY=y -CONFIG_ARC_BOARD_ML509=y # CONFIG_ARC_IDE is not set # CONFIG_ARCTANGENT_EMAC is not set # CONFIG_ARC_HAS_RTSC is not set
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild index e76fd79..b8fffc1 100644 --- a/arch/arc/include/asm/Kbuild +++ b/arch/arc/include/asm/Kbuild
@@ -18,6 +18,7 @@ generic-y += ioctls.h generic-y += ipcbuf.h generic-y += irq_regs.h +generic-y += irq_work.h generic-y += kmap_types.h generic-y += kvm_para.h generic-y += local.h
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index 372466b..be33db8 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h
@@ -9,19 +9,16 @@ #ifndef _ASM_ARC_ARCREGS_H #define _ASM_ARC_ARCREGS_H -#ifdef __KERNEL__ - /* Build Configuration Registers */ #define ARC_REG_DCCMBASE_BCR 0x61 /* DCCM Base Addr */ #define ARC_REG_CRC_BCR 0x62 -#define ARC_REG_DVFB_BCR 0x64 -#define ARC_REG_EXTARITH_BCR 0x65 #define ARC_REG_VECBASE_BCR 0x68 #define ARC_REG_PERIBASE_BCR 0x69 -#define ARC_REG_FP_BCR 0x6B /* Single-Precision FPU */ -#define ARC_REG_DPFP_BCR 0x6C /* Dbl Precision FPU */ +#define ARC_REG_FP_BCR 0x6B /* ARCompact: Single-Precision FPU */ +#define ARC_REG_DPFP_BCR 0x6C /* ARCompact: Dbl Precision FPU */ #define ARC_REG_DCCM_BCR 0x74 /* DCCM Present + SZ */ #define ARC_REG_TIMERS_BCR 0x75 +#define ARC_REG_AP_BCR 0x76 #define ARC_REG_ICCM_BCR 0x78 #define ARC_REG_XY_MEM_BCR 0x79 #define ARC_REG_MAC_BCR 0x7a @@ -31,6 +28,9 @@ #define ARC_REG_MIXMAX_BCR 0x7e #define ARC_REG_BARREL_BCR 0x7f #define ARC_REG_D_UNCACH_BCR 0x6A +#define ARC_REG_BPU_BCR 0xc0 +#define ARC_REG_ISA_CFG_BCR 0xc1 +#define ARC_REG_SMART_BCR 0xFF /* status32 Bits Positions */ #define STATUS_AE_BIT 5 /* Exception active */ @@ -191,14 +191,6 @@ #define PAGES_TO_KB(n_pages) ((n_pages) << (PAGE_SHIFT - 10)) #define PAGES_TO_MB(n_pages) (PAGES_TO_KB(n_pages) >> 10) -#ifdef CONFIG_ARC_FPU_SAVE_RESTORE -/* These DPFP regs need to be saved/restored across ctx-sw */ -struct arc_fpu { - struct { - unsigned int l, h; - } aux_dpfp[2]; -}; -#endif /* *************************************************************** @@ -212,27 +204,19 @@ #endif }; -#define EXTN_SWAP_VALID 0x1 -#define EXTN_NORM_VALID 0x2 -#define EXTN_MINMAX_VALID 0x2 -#define EXTN_BARREL_VALID 0x2 - -struct bcr_extn { +struct bcr_isa { #ifdef CONFIG_CPU_BIG_ENDIAN - unsigned int pad:20, crc:1, ext_arith:2, mul:2, barrel:2, minmax:2, - norm:2, swap:1; + unsigned int pad1:23, atomic1:1, ver:8; #else - unsigned int swap:1, norm:2, minmax:2, barrel:2, mul:2, ext_arith:2, - crc:1, pad:20; + unsigned int ver:8, atomic1:1, pad1:23; #endif }; -/* DSP Options Ref Manual */ -struct bcr_extn_mac_mul { +struct bcr_mpy { #ifdef CONFIG_CPU_BIG_ENDIAN - unsigned int pad:16, type:8, ver:8; + unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8; #else - unsigned int ver:8, type:8, pad:16; + unsigned int ver:8, type:2, cycles:2, dsp:4, x1616:8, pad:8; #endif }; @@ -251,6 +235,7 @@ unsigned int pad:8, sz:8, pad2:8, start:8; #endif }; + struct bcr_iccm { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int base:16, pad:5, sz:3, ver:8; @@ -277,8 +262,8 @@ #endif }; -/* Both SP and DP FPU BCRs have same format */ -struct bcr_fp { +/* ARCompact: Both SP and DP FPU BCRs have same format */ +struct bcr_fp_arcompact { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int fast:1, ver:8; #else @@ -286,6 +271,30 @@ #endif }; +struct bcr_timer { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad2:15, rtsc:1, pad1:6, t1:1, t0:1, ver:8; +#else + unsigned int ver:8, t0:1, t1:1, pad1:6, rtsc:1, pad2:15; +#endif +}; + +struct bcr_bpu_arcompact { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad2:19, fam:1, pad:2, ent:2, ver:8; +#else + unsigned int ver:8, ent:2, pad:2, fam:1, pad2:19; +#endif +}; + +struct bcr_generic { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:24, ver:8; +#else + unsigned int ver:8, pad:24; +#endif +}; + /* ******************************************************************* * Generic structures to hold build configuration used at runtime @@ -299,6 +308,10 @@ unsigned int sz_k:8, line_len:8, assoc:4, ver:4, alias:1, vipt:1, pad:6; }; +struct cpuinfo_arc_bpu { + unsigned int ver, full, num_cache, num_pred; +}; + struct cpuinfo_arc_ccm { unsigned int base_addr, sz; }; @@ -306,21 +319,25 @@ struct cpuinfo_arc { struct cpuinfo_arc_cache icache, dcache; struct cpuinfo_arc_mmu mmu; + struct cpuinfo_arc_bpu bpu; struct bcr_identity core; - unsigned int timers; + struct bcr_isa isa; + struct bcr_timer timers; unsigned int vec_base; unsigned int uncached_base; struct cpuinfo_arc_ccm iccm, dccm; - struct bcr_extn extn; + struct { + unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3, + fpu_sp:1, fpu_dp:1, pad2:6, + debug:1, ap:1, smart:1, rtt:1, pad3:4, + pad4:8; + } extn; + struct bcr_mpy extn_mpy; struct bcr_extn_xymem extn_xymem; - struct bcr_extn_mac_mul extn_mac_mul; - struct bcr_fp fp, dpfp; }; extern struct cpuinfo_arc cpuinfo_arc700[]; #endif /* __ASEMBLY__ */ -#endif /* __KERNEL__ */ - #endif /* _ASM_ARC_ARCREGS_H */
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h index 83f03ca..067551b 100644 --- a/arch/arc/include/asm/atomic.h +++ b/arch/arc/include/asm/atomic.h
@@ -9,8 +9,6 @@ #ifndef _ASM_ARC_ATOMIC_H #define _ASM_ARC_ATOMIC_H -#ifdef __KERNEL__ - #ifndef __ASSEMBLY__ #include <linux/types.h> @@ -25,79 +23,36 @@ #define atomic_set(v, i) (((v)->counter) = (i)) -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned int temp; +#define ATOMIC_OP(op, c_op, asm_op) \ +static inline void atomic_##op(int i, atomic_t *v) \ +{ \ + unsigned int temp; \ + \ + __asm__ __volatile__( \ + "1: llock %0, [%1] \n" \ + " " #asm_op " %0, %0, %2 \n" \ + " scond %0, [%1] \n" \ + " bnz 1b \n" \ + : "=&r"(temp) /* Early clobber, to prevent reg reuse */ \ + : "r"(&v->counter), "ir"(i) \ + : "cc"); \ +} \ - __asm__ __volatile__( - "1: llock %0, [%1] \n" - " add %0, %0, %2 \n" - " scond %0, [%1] \n" - " bnz 1b \n" - : "=&r"(temp) /* Early clobber, to prevent reg reuse */ - : "r"(&v->counter), "ir"(i) - : "cc"); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned int temp; - - __asm__ __volatile__( - "1: llock %0, [%1] \n" - " sub %0, %0, %2 \n" - " scond %0, [%1] \n" - " bnz 1b \n" - : "=&r"(temp) - : "r"(&v->counter), "ir"(i) - : "cc"); -} - -/* add and also return the new value */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned int temp; - - __asm__ __volatile__( - "1: llock %0, [%1] \n" - " add %0, %0, %2 \n" - " scond %0, [%1] \n" - " bnz 1b \n" - : "=&r"(temp) - : "r"(&v->counter), "ir"(i) - : "cc"); - - return temp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned int temp; - - __asm__ __volatile__( - "1: llock %0, [%1] \n" - " sub %0, %0, %2 \n" - " scond %0, [%1] \n" - " bnz 1b \n" - : "=&r"(temp) - : "r"(&v->counter), "ir"(i) - : "cc"); - - return temp; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned int temp; - - __asm__ __volatile__( - "1: llock %0, [%1] \n" - " bic %0, %0, %2 \n" - " scond %0, [%1] \n" - " bnz 1b \n" - : "=&r"(temp) - : "r"(addr), "ir"(mask) - : "cc"); +#define ATOMIC_OP_RETURN(op, c_op, asm_op) \ +static inline int atomic_##op##_return(int i, atomic_t *v) \ +{ \ + unsigned int temp; \ + \ + __asm__ __volatile__( \ + "1: llock %0, [%1] \n" \ + " " #asm_op " %0, %0, %2 \n" \ + " scond %0, [%1] \n" \ + " bnz 1b \n" \ + : "=&r"(temp) \ + : "r"(&v->counter), "ir"(i) \ + : "cc"); \ + \ + return temp; \ } #else /* !CONFIG_ARC_HAS_LLSC */ @@ -126,6 +81,7 @@ v->counter = i; atomic_ops_unlock(flags); } + #endif /* @@ -133,63 +89,47 @@ * Locking would change to irq-disabling only (UP) and spinlocks (SMP) */ -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned long flags; - - atomic_ops_lock(flags); - v->counter += i; - atomic_ops_unlock(flags); +#define ATOMIC_OP(op, c_op, asm_op) \ +static inline void atomic_##op(int i, atomic_t *v) \ +{ \ + unsigned long flags; \ + \ + atomic_ops_lock(flags); \ + v->counter c_op i; \ + atomic_ops_unlock(flags); \ } -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned long flags; - - atomic_ops_lock(flags); - v->counter -= i; - atomic_ops_unlock(flags); -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - unsigned long temp; - - atomic_ops_lock(flags); - temp = v->counter; - temp += i; - v->counter = temp; - atomic_ops_unlock(flags); - - return temp; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long flags; - unsigned long temp; - - atomic_ops_lock(flags); - temp = v->counter; - temp -= i; - v->counter = temp; - atomic_ops_unlock(flags); - - return temp; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - atomic_ops_lock(flags); - *addr &= ~mask; - atomic_ops_unlock(flags); +#define ATOMIC_OP_RETURN(op, c_op) \ +static inline int atomic_##op##_return(int i, atomic_t *v) \ +{ \ + unsigned long flags; \ + unsigned long temp; \ + \ + atomic_ops_lock(flags); \ + temp = v->counter; \ + temp c_op i; \ + v->counter = temp; \ + atomic_ops_unlock(flags); \ + \ + return temp; \ } #endif /* !CONFIG_ARC_HAS_LLSC */ +#define ATOMIC_OPS(op, c_op, asm_op) \ + ATOMIC_OP(op, c_op, asm_op) \ + ATOMIC_OP_RETURN(op, c_op, asm_op) + +ATOMIC_OPS(add, +=, add) +ATOMIC_OPS(sub, -=, sub) +ATOMIC_OP(and, &=, and) + +#define atomic_clear_mask(mask, v) atomic_and(~(mask), (v)) + +#undef ATOMIC_OPS +#undef ATOMIC_OP_RETURN +#undef ATOMIC_OP + /** * __atomic_add_unless - add unless the number is a given value * @v: pointer of type atomic_t @@ -228,5 +168,3 @@ #endif #endif - -#endif
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h index ebc0cf3..1a5bf07 100644 --- a/arch/arc/include/asm/bitops.h +++ b/arch/arc/include/asm/bitops.h
@@ -13,8 +13,6 @@ #error only <linux/bitops.h> can be included directly #endif -#ifdef __KERNEL__ - #ifndef __ASSEMBLY__ #include <linux/types.h> @@ -508,6 +506,4 @@ #endif /* !__ASSEMBLY__ */ -#endif /* __KERNEL__ */ - #endif
diff --git a/arch/arc/include/asm/bug.h b/arch/arc/include/asm/bug.h index 5b18e94..ea022d4 100644 --- a/arch/arc/include/asm/bug.h +++ b/arch/arc/include/asm/bug.h
@@ -21,10 +21,9 @@ unsigned long address); void die(const char *str, struct pt_regs *regs, unsigned long address); -#define BUG() do { \ - dump_stack(); \ - pr_warn("Kernel BUG in %s: %s: %d!\n", \ - __FILE__, __func__, __LINE__); \ +#define BUG() do { \ + pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ + dump_stack(); \ } while (0) #define HAVE_ARCH_BUG
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index b3c7509..7861255 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h
@@ -20,7 +20,7 @@ #define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1)) /* - * ARC700 doesn't cache any access in top 256M. + * ARC700 doesn't cache any access in top 1G (0xc000_0000 to 0xFFFF_FFFF) * Ideal for wiring memory mapped peripherals as we don't need to do * explicit uncached accesses (LD.di/ST.di) hence more portable drivers */
diff --git a/arch/arc/include/asm/current.h b/arch/arc/include/asm/current.h index 87b9185..c2453ee 100644 --- a/arch/arc/include/asm/current.h +++ b/arch/arc/include/asm/current.h
@@ -12,8 +12,6 @@ #ifndef _ASM_ARC_CURRENT_H #define _ASM_ARC_CURRENT_H -#ifdef __KERNEL__ - #ifndef __ASSEMBLY__ #ifdef CONFIG_ARC_CURR_IN_REG @@ -27,6 +25,4 @@ #endif /* ! __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - #endif /* _ASM_ARC_CURRENT_H */
diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h index 587df82..742816f 100644 --- a/arch/arc/include/asm/irqflags.h +++ b/arch/arc/include/asm/irqflags.h
@@ -15,8 +15,6 @@ * -Conditionally disable interrupts (if they are not enabled, don't disable) */ -#ifdef __KERNEL__ - #include <asm/arcregs.h> /* status32 Reg bits related to Interrupt Handling */ @@ -169,6 +167,4 @@ #endif /* __ASSEMBLY__ */ -#endif /* KERNEL */ - #endif
diff --git a/arch/arc/include/asm/kgdb.h b/arch/arc/include/asm/kgdb.h index b65fca7..fea9316 100644 --- a/arch/arc/include/asm/kgdb.h +++ b/arch/arc/include/asm/kgdb.h
@@ -19,7 +19,7 @@ * register API yet */ #undef DBG_MAX_REG_NUM -#define GDB_MAX_REGS 39 +#define GDB_MAX_REGS 87 #define BREAK_INSTR_SIZE 2 #define CACHE_FLUSH_IS_SAFE 1 @@ -33,23 +33,27 @@ extern void kgdb_trap(struct pt_regs *regs); -enum arc700_linux_regnums { +/* This is the numbering of registers according to the GDB. See GDB's + * arc-tdep.h for details. + * + * Registers are ordered for GDB 7.5. It is incompatible with GDB 6.8. */ +enum arc_linux_regnums { _R0 = 0, _R1, _R2, _R3, _R4, _R5, _R6, _R7, _R8, _R9, _R10, _R11, _R12, _R13, _R14, _R15, _R16, _R17, _R18, _R19, _R20, _R21, _R22, _R23, _R24, _R25, _R26, - _BTA = 27, - _LP_START = 28, - _LP_END = 29, - _LP_COUNT = 30, - _STATUS32 = 31, - _BLINK = 32, - _FP = 33, - __SP = 34, - _EFA = 35, - _RET = 36, - _ORIG_R8 = 37, - _STOP_PC = 38 + _FP = 27, + __SP = 28, + _R30 = 30, + _BLINK = 31, + _LP_COUNT = 60, + _STOP_PC = 64, + _RET = 64, + _LP_START = 65, + _LP_END = 66, + _STATUS32 = 67, + _ECR = 76, + _BTA = 82, }; #else
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h index 82588f3..210fe97 100644 --- a/arch/arc/include/asm/processor.h +++ b/arch/arc/include/asm/processor.h
@@ -14,12 +14,19 @@ #ifndef __ASM_ARC_PROCESSOR_H #define __ASM_ARC_PROCESSOR_H -#ifdef __KERNEL__ - #ifndef __ASSEMBLY__ #include <asm/ptrace.h> +#ifdef CONFIG_ARC_FPU_SAVE_RESTORE +/* These DPFP regs need to be saved/restored across ctx-sw */ +struct arc_fpu { + struct { + unsigned int l, h; + } aux_dpfp[2]; +}; +#endif + /* Arch specific stuff which needs to be saved per task. * However these items are not so important so as to earn a place in * struct thread_info @@ -128,6 +135,4 @@ */ #define TASK_UNMAPPED_BASE (TASK_SIZE / 3) -#endif /* __KERNEL__ */ - #endif /* __ASM_ARC_PROCESSOR_H */
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h index e10f8ce..6e3ef5b 100644 --- a/arch/arc/include/asm/setup.h +++ b/arch/arc/include/asm/setup.h
@@ -29,7 +29,6 @@ }; extern int root_mountflags, end_mem; -extern int running_on_hw; void setup_processor(void); void __init setup_arch_memory(void);
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 5d06eee..3845b9e 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h
@@ -59,7 +59,15 @@ /* TBD: stop exporting it for direct population by platform */ extern struct plat_smp_ops plat_smp_ops; -#endif /* CONFIG_SMP */ +#else /* CONFIG_SMP */ + +static inline void smp_init_cpus(void) {} +static inline const char *arc_platform_smp_cpuinfo(void) +{ + return ""; +} + +#endif /* !CONFIG_SMP */ /* * ARC700 doesn't support atomic Read-Modify-Write ops.
diff --git a/arch/arc/include/asm/string.h b/arch/arc/include/asm/string.h index 87676c8..95822b5 100644 --- a/arch/arc/include/asm/string.h +++ b/arch/arc/include/asm/string.h
@@ -17,8 +17,6 @@ #include <linux/types.h> -#ifdef __KERNEL__ - #define __HAVE_ARCH_MEMSET #define __HAVE_ARCH_MEMCPY #define __HAVE_ARCH_MEMCMP @@ -36,5 +34,4 @@ extern int strcmp(const char *cs, const char *ct); extern __kernel_size_t strlen(const char *); -#endif /* __KERNEL__ */ #endif /* _ASM_ARC_STRING_H */
diff --git a/arch/arc/include/asm/syscalls.h b/arch/arc/include/asm/syscalls.h index dd785be..e56f9fc 100644 --- a/arch/arc/include/asm/syscalls.h +++ b/arch/arc/include/asm/syscalls.h
@@ -9,8 +9,6 @@ #ifndef _ASM_ARC_SYSCALLS_H #define _ASM_ARC_SYSCALLS_H 1 -#ifdef __KERNEL__ - #include <linux/compiler.h> #include <linux/linkage.h> #include <linux/types.h> @@ -22,6 +20,4 @@ #include <asm-generic/syscalls.h> -#endif /* __KERNEL__ */ - #endif
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h index 45be216..02bc5ec 100644 --- a/arch/arc/include/asm/thread_info.h +++ b/arch/arc/include/asm/thread_info.h
@@ -16,8 +16,6 @@ #ifndef _ASM_THREAD_INFO_H #define _ASM_THREAD_INFO_H -#ifdef __KERNEL__ - #include <asm/page.h> #ifdef CONFIG_16KSTACKS @@ -114,6 +112,4 @@ * syscall, so all that reamins to be tested is _TIF_WORK_MASK */ -#endif /* __KERNEL__ */ - #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h index 3e5f071..6da6b4e 100644 --- a/arch/arc/include/asm/unaligned.h +++ b/arch/arc/include/asm/unaligned.h
@@ -14,7 +14,7 @@ #include <asm-generic/unaligned.h> #include <asm/ptrace.h> -#ifdef CONFIG_ARC_MISALIGN_ACCESS +#ifdef CONFIG_ARC_EMUL_UNALIGNED int misaligned_fixup(unsigned long address, struct pt_regs *regs, struct callee_regs *cregs); #else
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile index 8004b4f..113f203 100644 --- a/arch/arc/kernel/Makefile +++ b/arch/arc/kernel/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_ARC_DW2_UNWIND) += unwind.o obj-$(CONFIG_KPROBES) += kprobes.o -obj-$(CONFIG_ARC_MISALIGN_ACCESS) += unaligned.o +obj-$(CONFIG_ARC_EMUL_UNALIGNED) += unaligned.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARC_METAWARE_HLINK) += arc_hostlink.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o
diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c index b8a549c..3b7cd48 100644 --- a/arch/arc/kernel/disasm.c +++ b/arch/arc/kernel/disasm.c
@@ -15,7 +15,7 @@ #include <linux/uaccess.h> #include <asm/disasm.h> -#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \ +#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_EMUL_UNALIGNED) || \ defined(CONFIG_KPROBES) /* disasm_instr: Analyses instruction at addr, stores @@ -535,4 +535,4 @@ return instr.is_branch; } -#endif /* CONFIG_KGDB || CONFIG_ARC_MISALIGN_ACCESS || CONFIG_KPROBES */ +#endif /* CONFIG_KGDB || CONFIG_ARC_EMUL_UNALIGNED || CONFIG_KPROBES */
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 4d2481b..b0e8666 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S
@@ -91,16 +91,6 @@ st r0, [@uboot_tag] st r2, [@uboot_arg] - ; Identify if running on ISS vs Silicon - ; IDENTITY Reg [ 3 2 1 0 ] - ; (chip-id) ^^^^^ ==> 0xffff for ISS - lr r0, [identity] - lsr r3, r0, 16 - cmp r3, 0xffff - mov.z r4, 0 - mov.nz r4, 1 - st r4, [@running_on_hw] - ; setup "current" tsk and optionally cache it in dedicated r25 mov r9, @init_task SET_CURR_TASK_ON_CPU r9, r0 ; r9 = tsk, r0 = scratch
diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c index a2ff5c5..ecf6a78 100644 --- a/arch/arc/kernel/kgdb.c +++ b/arch/arc/kernel/kgdb.c
@@ -158,11 +158,6 @@ return -1; } -unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs) -{ - return instruction_pointer(regs); -} - int kgdb_arch_init(void) { single_step_data.armed = 0;
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index b9a5685..ae1c485 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c
@@ -244,25 +244,23 @@ pr_err("This core does not have performance counters!\n"); return -ENODEV; } + BUG_ON(pct_bcr.c > ARC_PMU_MAX_HWEVENTS); - arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), - GFP_KERNEL); + READ_BCR(ARC_REG_CC_BUILD, cc_bcr); + if (!cc_bcr.v) { + pr_err("Performance counters exist, but no countable conditions?\n"); + return -ENODEV; + } + + arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), GFP_KERNEL); if (!arc_pmu) return -ENOMEM; arc_pmu->n_counters = pct_bcr.c; - BUG_ON(arc_pmu->n_counters > ARC_PMU_MAX_HWEVENTS); - arc_pmu->counter_size = 32 + (pct_bcr.s << 4); - pr_info("ARC PMU found with %d counters of size %d bits\n", - arc_pmu->n_counters, arc_pmu->counter_size); - READ_BCR(ARC_REG_CC_BUILD, cc_bcr); - - if (!cc_bcr.v) - pr_err("Strange! Performance counters exist, but no countable conditions?\n"); - - pr_info("ARC PMU has %d countable conditions\n", cc_bcr.c); + pr_info("ARC perf\t: %d counters (%d bits), %d countable conditions\n", + arc_pmu->n_counters, arc_pmu->counter_size, cc_bcr.c); cc_name.str[8] = 0; for (i = 0; i < PERF_COUNT_HW_MAX; i++)
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 119dddb..252bf60 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c
@@ -13,7 +13,9 @@ #include <linux/console.h> #include <linux/module.h> #include <linux/cpu.h> +#include <linux/clk-provider.h> #include <linux/of_fdt.h> +#include <linux/of_platform.h> #include <linux/cache.h> #include <asm/sections.h> #include <asm/arcregs.h> @@ -24,11 +26,10 @@ #include <asm/unwind.h> #include <asm/clk.h> #include <asm/mach_desc.h> +#include <asm/smp.h> #define FIX_PTR(x) __asm__ __volatile__(";" : "+r"(x)) -int running_on_hw = 1; /* vs. on ISS */ - /* Part of U-boot ABI: see head.S */ int __initdata uboot_tag; char __initdata *uboot_arg; @@ -42,26 +43,26 @@ static void read_arc_build_cfg_regs(void) { struct bcr_perip uncached_space; + struct bcr_generic bcr; struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; FIX_PTR(cpu); READ_BCR(AUX_IDENTITY, cpu->core); + READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa); - cpu->timers = read_aux_reg(ARC_REG_TIMERS_BCR); + READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers); cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE); READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space); cpu->uncached_base = uncached_space.start << 24; - cpu->extn.mul = read_aux_reg(ARC_REG_MUL_BCR); - cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR); - cpu->extn.norm = read_aux_reg(ARC_REG_NORM_BCR); - cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR); - cpu->extn.barrel = read_aux_reg(ARC_REG_BARREL_BCR); - READ_BCR(ARC_REG_MAC_BCR, cpu->extn_mac_mul); + READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy); - cpu->extn.ext_arith = read_aux_reg(ARC_REG_EXTARITH_BCR); - cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR); + cpu->extn.norm = read_aux_reg(ARC_REG_NORM_BCR) > 1 ? 1 : 0; /* 2,3 */ + cpu->extn.barrel = read_aux_reg(ARC_REG_BARREL_BCR) > 1 ? 1 : 0; /* 2,3 */ + cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0; /* 1,3 */ + cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0; + cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */ /* Note that we read the CCM BCRs independent of kernel config * This is to catch the cases where user doesn't know that @@ -95,43 +96,76 @@ read_decode_mmu_bcr(); read_decode_cache_bcr(); - READ_BCR(ARC_REG_FP_BCR, cpu->fp); - READ_BCR(ARC_REG_DPFP_BCR, cpu->dpfp); + { + struct bcr_fp_arcompact sp, dp; + struct bcr_bpu_arcompact bpu; + + READ_BCR(ARC_REG_FP_BCR, sp); + READ_BCR(ARC_REG_DPFP_BCR, dp); + cpu->extn.fpu_sp = sp.ver ? 1 : 0; + cpu->extn.fpu_dp = dp.ver ? 1 : 0; + + READ_BCR(ARC_REG_BPU_BCR, bpu); + cpu->bpu.ver = bpu.ver; + cpu->bpu.full = bpu.fam ? 1 : 0; + if (bpu.ent) { + cpu->bpu.num_cache = 256 << (bpu.ent - 1); + cpu->bpu.num_pred = 256 << (bpu.ent - 1); + } + } + + READ_BCR(ARC_REG_AP_BCR, bcr); + cpu->extn.ap = bcr.ver ? 1 : 0; + + READ_BCR(ARC_REG_SMART_BCR, bcr); + cpu->extn.smart = bcr.ver ? 1 : 0; + + cpu->extn.debug = cpu->extn.ap | cpu->extn.smart; } static const struct cpuinfo_data arc_cpu_tbl[] = { - { {0x10, "ARCTangent A5"}, 0x1F}, { {0x20, "ARC 600" }, 0x2F}, { {0x30, "ARC 700" }, 0x33}, { {0x34, "ARC 700 R4.10"}, 0x34}, + { {0x35, "ARC 700 R4.11"}, 0x35}, { {0x00, NULL } } }; +#define IS_AVAIL1(v, str) ((v) ? str : "") +#define IS_USED(cfg) (IS_ENABLED(cfg) ? "" : "(not used) ") +#define IS_AVAIL2(v, str, cfg) IS_AVAIL1(v, str), IS_AVAIL1(v, IS_USED(cfg)) + static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) { - int n = 0; struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id]; struct bcr_identity *core = &cpu->core; const struct cpuinfo_data *tbl; - int be = 0; -#ifdef CONFIG_CPU_BIG_ENDIAN - be = 1; -#endif + char *isa_nm; + int i, be, atomic; + int n = 0; + FIX_PTR(cpu); + { + isa_nm = "ARCompact"; + be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN); + + atomic = cpu->isa.atomic1; + if (!cpu->isa.ver) /* ISA BCR absent, use Kconfig info */ + atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC); + } + n += scnprintf(buf + n, len - n, - "\nARC IDENTITY\t: Family [%#02x]" - " Cpu-id [%#02x] Chip-id [%#4x]\n", - core->family, core->cpu_id, - core->chip_id); + "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n", + core->family, core->cpu_id, core->chip_id); for (tbl = &arc_cpu_tbl[0]; tbl->info.id != 0; tbl++) { if ((core->family >= tbl->info.id) && (core->family <= tbl->up_range)) { n += scnprintf(buf + n, len - n, - "processor\t: %s %s\n", - tbl->info.str, - be ? "[Big Endian]" : ""); + "processor [%d]\t: %s (%s ISA) %s\n", + cpu_id, tbl->info.str, isa_nm, + IS_AVAIL1(be, "[Big-Endian]")); break; } } @@ -143,102 +177,82 @@ (unsigned int)(arc_get_core_freq() / 1000000), (unsigned int)(arc_get_core_freq() / 10000) % 100); - n += scnprintf(buf + n, len - n, "Timers\t\t: %s %s\n", - (cpu->timers & 0x200) ? "TIMER1" : "", - (cpu->timers & 0x100) ? "TIMER0" : ""); + n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ", + IS_AVAIL1(cpu->timers.t0, "Timer0 "), + IS_AVAIL1(cpu->timers.t1, "Timer1 "), + IS_AVAIL2(cpu->timers.rtsc, "64-bit RTSC ", CONFIG_ARC_HAS_RTSC)); - n += scnprintf(buf + n, len - n, "Vect Tbl Base\t: %#x\n", - cpu->vec_base); + n += i = scnprintf(buf + n, len - n, "%s%s", + IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC)); - n += scnprintf(buf + n, len - n, "UNCACHED Base\t: %#x\n", - cpu->uncached_base); + if (i) + n += scnprintf(buf + n, len - n, "\n\t\t: "); + + n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n", + IS_AVAIL1(cpu->extn_mpy.ver, "mpy "), + IS_AVAIL1(cpu->extn.norm, "norm "), + IS_AVAIL1(cpu->extn.barrel, "barrel-shift "), + IS_AVAIL1(cpu->extn.swap, "swap "), + IS_AVAIL1(cpu->extn.minmax, "minmax "), + IS_AVAIL1(cpu->extn.crc, "crc "), + IS_AVAIL2(1, "swape", CONFIG_ARC_HAS_SWAPE)); + + if (cpu->bpu.ver) + n += scnprintf(buf + n, len - n, + "BPU\t\t: %s%s match, cache:%d, Predict Table:%d\n", + IS_AVAIL1(cpu->bpu.full, "full"), + IS_AVAIL1(!cpu->bpu.full, "partial"), + cpu->bpu.num_cache, cpu->bpu.num_pred); return buf; } -static const struct id_to_str mul_type_nm[] = { - { 0x0, "N/A"}, - { 0x1, "32x32 (spl Result Reg)" }, - { 0x2, "32x32 (ANY Result Reg)" } -}; - -static const struct id_to_str mac_mul_nm[] = { - {0x0, "N/A"}, - {0x1, "N/A"}, - {0x2, "Dual 16 x 16"}, - {0x3, "N/A"}, - {0x4, "32x16"}, - {0x5, "N/A"}, - {0x6, "Dual 16x16 and 32x16"} -}; - static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id]; FIX_PTR(cpu); -#define IS_AVAIL1(var, str) ((var) ? str : "") -#define IS_AVAIL2(var, str) ((var == 0x2) ? str : "") -#define IS_USED(cfg) (IS_ENABLED(cfg) ? "(in-use)" : "(not used)") n += scnprintf(buf + n, len - n, - "Extn [700-Base]\t: %s %s %s %s %s %s\n", - IS_AVAIL2(cpu->extn.norm, "norm,"), - IS_AVAIL2(cpu->extn.barrel, "barrel-shift,"), - IS_AVAIL1(cpu->extn.swap, "swap,"), - IS_AVAIL2(cpu->extn.minmax, "minmax,"), - IS_AVAIL1(cpu->extn.crc, "crc,"), - IS_AVAIL2(cpu->extn.ext_arith, "ext-arith")); + "Vector Table\t: %#x\nUncached Base\t: %#x\n", + cpu->vec_base, cpu->uncached_base); - n += scnprintf(buf + n, len - n, "Extn [700-MPY]\t: %s", - mul_type_nm[cpu->extn.mul].str); + if (cpu->extn.fpu_sp || cpu->extn.fpu_dp) + n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n", + IS_AVAIL1(cpu->extn.fpu_sp, "SP "), + IS_AVAIL1(cpu->extn.fpu_dp, "DP ")); - n += scnprintf(buf + n, len - n, " MAC MPY: %s\n", - mac_mul_nm[cpu->extn_mac_mul.type].str); + if (cpu->extn.debug) + n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s%s\n", + IS_AVAIL1(cpu->extn.ap, "ActionPoint "), + IS_AVAIL1(cpu->extn.smart, "smaRT "), + IS_AVAIL1(cpu->extn.rtt, "RTT ")); - if (cpu->core.family == 0x34) { - n += scnprintf(buf + n, len - n, - "Extn [700-4.10]\t: LLOCK/SCOND %s, SWAPE %s, RTSC %s\n", - IS_USED(CONFIG_ARC_HAS_LLSC), - IS_USED(CONFIG_ARC_HAS_SWAPE), - IS_USED(CONFIG_ARC_HAS_RTSC)); - } - - n += scnprintf(buf + n, len - n, "Extn [CCM]\t: %s", - !(cpu->dccm.sz || cpu->iccm.sz) ? "N/A" : ""); - - if (cpu->dccm.sz) - n += scnprintf(buf + n, len - n, "DCCM: @ %x, %d KB ", - cpu->dccm.base_addr, TO_KB(cpu->dccm.sz)); - - if (cpu->iccm.sz) - n += scnprintf(buf + n, len - n, "ICCM: @ %x, %d KB", + if (cpu->dccm.sz || cpu->iccm.sz) + n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n", + cpu->dccm.base_addr, TO_KB(cpu->dccm.sz), cpu->iccm.base_addr, TO_KB(cpu->iccm.sz)); - n += scnprintf(buf + n, len - n, "\nExtn [FPU]\t: %s", - !(cpu->fp.ver || cpu->dpfp.ver) ? "N/A" : ""); - - if (cpu->fp.ver) - n += scnprintf(buf + n, len - n, "SP [v%d] %s", - cpu->fp.ver, cpu->fp.fast ? "(fast)" : ""); - - if (cpu->dpfp.ver) - n += scnprintf(buf + n, len - n, "DP [v%d] %s", - cpu->dpfp.ver, cpu->dpfp.fast ? "(fast)" : ""); - - n += scnprintf(buf + n, len - n, "\n"); - n += scnprintf(buf + n, len - n, "OS ABI [v3]\t: no-legacy-syscalls\n"); return buf; } -static void arc_chk_ccms(void) +static void arc_chk_core_config(void) { -#if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM) struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; + int fpu_enabled; + + if (!cpu->timers.t0) + panic("Timer0 is not present!\n"); + + if (!cpu->timers.t1) + panic("Timer1 is not present!\n"); + + if (IS_ENABLED(CONFIG_ARC_HAS_RTSC) && !cpu->timers.rtsc) + panic("RTSC is not present\n"); #ifdef CONFIG_ARC_HAS_DCCM /* @@ -256,33 +270,20 @@ if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz) panic("Linux built with incorrect ICCM Size\n"); #endif -#endif -} -/* - * Ensure that FP hardware and kernel config match - * -If hardware contains DPFP, kernel needs to save/restore FPU state - * across context switches - * -If hardware lacks DPFP, but kernel configured to save FPU state then - * kernel trying to access non-existant DPFP regs will crash - * - * We only check for Dbl precision Floating Point, because only DPFP - * hardware has dedicated regs which need to be saved/restored on ctx-sw - * (Single Precision uses core regs), thus kernel is kind of oblivious to it - */ -static void arc_chk_fpu(void) -{ - struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; + /* + * FP hardware/software config sanity + * -If hardware contains DPFP, kernel needs to save/restore FPU state + * -If not, it will crash trying to save/restore the non-existant regs + * + * (only DPDP checked since SP has no arch visible regs) + */ + fpu_enabled = IS_ENABLED(CONFIG_ARC_FPU_SAVE_RESTORE); - if (cpu->dpfp.ver) { -#ifndef CONFIG_ARC_FPU_SAVE_RESTORE - pr_warn("DPFP support broken in this kernel...\n"); -#endif - } else { -#ifdef CONFIG_ARC_FPU_SAVE_RESTORE - panic("H/w lacks DPFP support, apps won't work\n"); -#endif - } + if (cpu->extn.fpu_dp && !fpu_enabled) + pr_warn("CONFIG_ARC_FPU_SAVE_RESTORE needed for working apps\n"); + else if (!cpu->extn.fpu_dp && fpu_enabled) + panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n"); } /* @@ -303,15 +304,11 @@ arc_mmu_init(); arc_cache_init(); - arc_chk_ccms(); printk(arc_extn_mumbojumbo(cpu_id, str, sizeof(str))); - -#ifdef CONFIG_SMP printk(arc_platform_smp_cpuinfo()); -#endif - arc_chk_fpu(); + arc_chk_core_config(); } static inline int is_kernel(unsigned long addr) @@ -360,11 +357,7 @@ machine_desc->init_early(); setup_processor(); - -#ifdef CONFIG_SMP smp_init_cpus(); -#endif - setup_arch_memory(); /* copy flat DT out of .init and then unflatten it */ @@ -385,7 +378,13 @@ static int __init customize_machine(void) { - /* Add platform devices */ + of_clk_init(NULL); + /* + * Traverses flattened DeviceTree - registering platform devices + * (if any) complete with their resources + */ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + if (machine_desc->init_machine) machine_desc->init_machine(); @@ -419,19 +418,14 @@ seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE)); - seq_printf(m, "Bogo MIPS : \t%lu.%02lu\n", + seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n", loops_per_jiffy / (500000 / HZ), (loops_per_jiffy / (5000 / HZ)) % 100); seq_printf(m, arc_mmu_mumbojumbo(cpu_id, str, PAGE_SIZE)); - seq_printf(m, arc_cache_mumbojumbo(cpu_id, str, PAGE_SIZE)); - seq_printf(m, arc_extn_mumbojumbo(cpu_id, str, PAGE_SIZE)); - -#ifdef CONFIG_SMP seq_printf(m, arc_platform_smp_cpuinfo()); -#endif free_page((unsigned long)str); done:
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index dcd317c..d01df0c 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c
@@ -101,7 +101,7 @@ const char *arc_platform_smp_cpuinfo(void) { - return plat_smp_ops.info; + return plat_smp_ops.info ? : ""; } /*
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 9e11427..8c3a3e0 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c
@@ -530,16 +530,9 @@ */ void flush_icache_range(unsigned long kstart, unsigned long kend) { - unsigned int tot_sz, off, sz; - unsigned long phy, pfn; + unsigned int tot_sz; - /* printk("Kernel Cache Cohenercy: %lx to %lx\n",kstart, kend); */ - - /* This is not the right API for user virtual address */ - if (kstart < TASK_SIZE) { - BUG_ON("Flush icache range for user virtual addr space"); - return; - } + WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__); /* Shortcut for bigger flush ranges. * Here we don't care if this was kernel virtual or phy addr @@ -572,6 +565,9 @@ * straddles across 2 virtual pages and hence need for loop */ while (tot_sz > 0) { + unsigned int off, sz; + unsigned long phy, pfn; + off = kstart % PAGE_SIZE; pfn = vmalloc_to_pfn((void *)kstart); phy = (pfn << PAGE_SHIFT) + off;
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index e1acf0c..7f47d2a 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c
@@ -609,14 +609,12 @@ int n = 0; struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu; - n += scnprintf(buf + n, len - n, "ARC700 MMU [v%x]\t: %dk PAGE, ", - p_mmu->ver, TO_KB(p_mmu->pg_sz)); - n += scnprintf(buf + n, len - n, - "J-TLB %d (%dx%d), uDTLB %d, uITLB %d, %s\n", + "MMU [v%x]\t: %dk PAGE, JTLB %d (%dx%d), uDTLB %d, uITLB %d %s\n", + p_mmu->ver, TO_KB(p_mmu->pg_sz), p_mmu->num_tlb, p_mmu->sets, p_mmu->ways, p_mmu->u_dtlb, p_mmu->u_itlb, - IS_ENABLED(CONFIG_ARC_MMU_SASID) ? "SASID" : ""); + IS_ENABLED(CONFIG_ARC_MMU_SASID) ? ",SASID" : ""); return buf; }
diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig index b9f34cf..217593a 100644 --- a/arch/arc/plat-arcfpga/Kconfig +++ b/arch/arc/plat-arcfpga/Kconfig
@@ -8,7 +8,7 @@ menuconfig ARC_PLAT_FPGA_LEGACY bool "\"Legacy\" ARC FPGA dev Boards" - select ISS_SMP_EXTN if SMP + select ARC_HAS_COH_CACHES if SMP help Support for ARC development boards, provided by Synopsys. These are based on FPGA or ISS. e.g. @@ -18,17 +18,6 @@ if ARC_PLAT_FPGA_LEGACY -config ARC_BOARD_ANGEL4 - bool "ARC Angel4" - default y - help - ARC Angel4 FPGA Ref Platform (Xilinx Virtex Based) - -config ARC_BOARD_ML509 - bool "ML509" - help - ARC ML509 FPGA Ref Platform (Xilinx Virtex-5 Based) - config ISS_SMP_EXTN bool "ARC SMP Extensions (ISS Models only)" default n
diff --git a/arch/arc/plat-arcfpga/include/plat/irq.h b/arch/arc/plat-arcfpga/include/plat/irq.h deleted file mode 100644 index 2c9dea6..0000000 --- a/arch/arc/plat-arcfpga/include/plat/irq.h +++ /dev/null
@@ -1,27 +0,0 @@ -/* - * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * vineetg: Feb 2009 - * -For AA4 board, IRQ assignments to peripherals - */ - -#ifndef __PLAT_IRQ_H -#define __PLAT_IRQ_H - -#define UART0_IRQ 5 -#define UART1_IRQ 10 -#define UART2_IRQ 11 - -#define IDE_IRQ 13 -#define PCI_IRQ 14 -#define PS2_IRQ 15 - -#ifdef CONFIG_SMP -#define IDU_INTERRUPT_0 16 -#endif - -#endif
diff --git a/arch/arc/plat-arcfpga/include/plat/memmap.h b/arch/arc/plat-arcfpga/include/plat/memmap.h deleted file mode 100644 index 5c78e61..0000000 --- a/arch/arc/plat-arcfpga/include/plat/memmap.h +++ /dev/null
@@ -1,29 +0,0 @@ -/* - * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * vineetg: Feb 2009 - * -For AA4 board, System Memory Map for Peripherals etc - */ - -#ifndef __PLAT_MEMMAP_H -#define __PLAT_MEMMAP_H - -#define UART0_BASE 0xC0FC1000 -#define UART1_BASE 0xC0FC1100 - -#define IDE_CONTROLLER_BASE 0xC0FC9000 - -#define AHB_PCI_HOST_BRG_BASE 0xC0FD0000 - -#define PGU_BASEADDR 0xC0FC8000 -#define VLCK_ADDR 0xC0FCF028 - -#define BVCI_LAT_UNIT_BASE 0xC0FED000 - -#define PS2_BASE_ADDR 0xC0FCC000 - -#endif
diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c index 1038949..afc8825 100644 --- a/arch/arc/plat-arcfpga/platform.c +++ b/arch/arc/plat-arcfpga/platform.c
@@ -8,37 +8,9 @@ * published by the Free Software Foundation. */ -#include <linux/types.h> #include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/console.h> -#include <linux/of_platform.h> -#include <asm/setup.h> -#include <asm/clk.h> #include <asm/mach_desc.h> -#include <plat/memmap.h> #include <plat/smp.h> -#include <plat/irq.h> - -static void __init plat_fpga_early_init(void) -{ - pr_info("[plat-arcfpga]: registering early dev resources\n"); - -#ifdef CONFIG_ISS_SMP_EXTN - iss_model_init_early_smp(); -#endif -} - -static void __init plat_fpga_populate_dev(void) -{ - /* - * Traverses flattened DeviceTree - registering platform devices - * (if any) complete with their resources - */ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} /*----------------------- Machine Descriptions ------------------------------ * @@ -48,41 +20,26 @@ * callback set, by matching the DT compatible name. */ -static const char *aa4_compat[] __initconst = { +static const char *legacy_fpga_compat[] __initconst = { "snps,arc-angel4", - NULL, -}; - -MACHINE_START(ANGEL4, "angel4") - .dt_compat = aa4_compat, - .init_early = plat_fpga_early_init, - .init_machine = plat_fpga_populate_dev, -#ifdef CONFIG_ISS_SMP_EXTN - .init_smp = iss_model_init_smp, -#endif -MACHINE_END - -static const char *ml509_compat[] __initconst = { "snps,arc-ml509", NULL, }; -MACHINE_START(ML509, "ml509") - .dt_compat = ml509_compat, - .init_early = plat_fpga_early_init, - .init_machine = plat_fpga_populate_dev, -#ifdef CONFIG_SMP +MACHINE_START(LEGACY_FPGA, "legacy_fpga") + .dt_compat = legacy_fpga_compat, +#ifdef CONFIG_ISS_SMP_EXTN + .init_early = iss_model_init_early_smp, .init_smp = iss_model_init_smp, #endif MACHINE_END -static const char *nsimosci_compat[] __initconst = { +static const char *simulation_compat[] __initconst = { + "snps,nsim", "snps,nsimosci", NULL, }; -MACHINE_START(NSIMOSCI, "nsimosci") - .dt_compat = nsimosci_compat, - .init_early = NULL, - .init_machine = plat_fpga_populate_dev, +MACHINE_START(SIMULATION, "simulation") + .dt_compat = simulation_compat, MACHINE_END
diff --git a/arch/arc/plat-arcfpga/smp.c b/arch/arc/plat-arcfpga/smp.c index 92bad91..64797ba 100644 --- a/arch/arc/plat-arcfpga/smp.c +++ b/arch/arc/plat-arcfpga/smp.c
@@ -13,9 +13,10 @@ #include <linux/smp.h> #include <linux/irq.h> -#include <plat/irq.h> #include <plat/smp.h> +#define IDU_INTERRUPT_0 16 + static char smp_cpuinfo_buf[128]; /*
diff --git a/arch/arc/plat-tb10x/Kconfig b/arch/arc/plat-tb10x/Kconfig index 6994c18..d14b3d3 100644 --- a/arch/arc/plat-tb10x/Kconfig +++ b/arch/arc/plat-tb10x/Kconfig
@@ -18,7 +18,6 @@ menuconfig ARC_PLAT_TB10X bool "Abilis TB10x" - select COMMON_CLK select PINCTRL select PINCTRL_TB10X select PINMUX
diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c index 06cb309..da0ac09 100644 --- a/arch/arc/plat-tb10x/tb10x.c +++ b/arch/arc/plat-tb10x/tb10x.c
@@ -19,21 +19,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - #include <linux/init.h> -#include <linux/of_platform.h> -#include <linux/clk-provider.h> -#include <linux/pinctrl/consumer.h> - #include <asm/mach_desc.h> - -static void __init tb10x_platform_init(void) -{ - of_clk_init(NULL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *tb10x_compat[] __initdata = { "abilis,arc-tb10x", NULL, @@ -41,5 +29,4 @@ MACHINE_START(TB10x, "tb10x") .dt_compat = tb10x_compat, - .init_machine = tb10x_platform_init, MACHINE_END
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 32cbbd5..89c4b5c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig
@@ -14,6 +14,7 @@ select CLONE_BACKWARDS select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS + select GENERIC_ALLOCATOR select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IDLE_POLL_SETUP @@ -24,6 +25,7 @@ select GENERIC_SMP_IDLE_THREAD select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER + select HANDLE_DOMAIN_IRQ select HARDIRQS_SW_RESEND select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL @@ -60,6 +62,7 @@ select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP + select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE) select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 @@ -387,6 +390,7 @@ select CPU_ARM720T select GENERIC_CLOCKEVENTS select MFD_SYSCON + select SOC_BUS help Support for Cirrus Logic 711x/721x/731x based boards. @@ -650,6 +654,7 @@ select ARCH_SHMOBILE select ARM_PATCH_PHYS_VIRT if MMU select CLKDEV_LOOKUP + select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -660,6 +665,7 @@ select NO_IOPORT_MAP select PINCTRL select PM_GENERIC_DOMAINS if PM + select SH_CLK_CPG select SPARSE_IRQ help Support for Renesas ARM SoC platforms using a non-multiplatform @@ -888,6 +894,8 @@ source "arch/arm/mach-ks8695/Kconfig" +source "arch/arm/mach-meson/Kconfig" + source "arch/arm/mach-msm/Kconfig" source "arch/arm/mach-moxart/Kconfig" @@ -1405,6 +1413,15 @@ for (multi-)cluster based systems, such as big.LITTLE based systems. +config MCPM_QUAD_CLUSTER + bool + depends on MCPM + help + To avoid wasting resources unnecessarily, MCPM only supports up + to 2 clusters by default. + Platforms with 3 or 4 clusters that use MCPM must select this + option to allow the additional clusters to be managed. + config BIG_LITTLE bool "big.LITTLE support (Experimental)" depends on CPU_V7 && SMP @@ -1644,6 +1661,10 @@ config HAVE_ARCH_PFN_VALID def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM +config HAVE_GENERIC_RCU_GUP + def_bool y + depends on ARM_LPAE + config HIGHMEM bool "High Memory Support" depends on MMU @@ -1758,7 +1779,7 @@ depends on XEN config XEN - bool "Xen guest support on ARM (EXPERIMENTAL)" + bool "Xen guest support on ARM" depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b11ad54..03dc4c1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug
@@ -101,6 +101,10 @@ bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 + config AT91_DEBUG_LL_DBGU2 + bool "Kernel low-level debugging on sama5d4" + depends on HAVE_AT91_DBGU2 + config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 @@ -122,6 +126,11 @@ mobile SoCs in the Kona family of chips (e.g. bcm28155, bcm11351, etc...) + config DEBUG_BCM63XX + bool "Kernel low-level debugging on BCM63XX UART" + depends on ARCH_BCM_63XX + select DEBUG_UART_BCM63XX + config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART" depends on ARCH_BERLIN @@ -147,7 +156,7 @@ config DEBUG_CNS3XXX bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" depends on ARCH_CNS3XXX - select DEBUG_UART_PL01X + select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to the CNS3xxx UART0. @@ -223,14 +232,6 @@ Say Y here if you want kernel low-level debugging support on HI3716 UART. - config DEBUG_HIX5HD2_UART - bool "Hisilicon Hix5hd2 Debug UART" - depends on ARCH_HIX5HD2 - select DEBUG_UART_PL01X - help - Say Y here if you want kernel low-level debugging support - on Hix5hd2 UART. - config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -239,6 +240,22 @@ Say Y here if you want the debug print routines to direct their output to the UART on Highbank based devices. + config DEBUG_HIP04_UART + bool "Hisilicon HiP04 Debug UART" + depends on ARCH_HIP04 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on HIP04 UART. + + config DEBUG_HIX5HD2_UART + bool "Hisilicon Hix5hd2 Debug UART" + depends on ARCH_HIX5HD2 + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on Hix5hd2 UART. + config DEBUG_IMX1_UART bool "i.MX1 Debug UART" depends on SOC_IMX1 @@ -348,6 +365,13 @@ Say Y here if you want the debug print routines to direct their output to UART1 serial port on KEYSTONE2 devices. + config DEBUG_MESON_UARTAO + bool "Kernel low-level debugging via Meson6 UARTAO" + depends on ARCH_MESON + help + Say Y here if you want kernel low-lever debugging support + on Amlogic Meson6 based platforms on the UARTAO. + config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" depends on ARCH_MMP @@ -834,6 +858,14 @@ Say Y here if you want kernel low-level debugging support on Ux500 based platforms. + config DEBUG_MT6589_UART0 + bool "Mediatek mt6589 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt6589 based platforms on UART0. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -1011,6 +1043,7 @@ string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 + default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/efm32.S" if DEBUG_LL_UART_EFM32 @@ -1038,6 +1071,7 @@ default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 + default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX default "mach/debug-macro.S" # Compatibility options for PL01x @@ -1057,6 +1091,10 @@ ARCH_IOP33X || ARCH_IXP4XX || \ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC +# Compatibility options for BCM63xx +config DEBUG_UART_BCM63XX + def_bool ARCH_BCM_63XX + config DEBUG_UART_PHYS hex "Physical base address of debug UART" default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 @@ -1068,13 +1106,14 @@ default 0x02530c00 if DEBUG_KEYSTONE_UART0 default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC - default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \ + default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT default 0x10124000 if DEBUG_RK3X_UART0 default 0x10126000 if DEBUG_RK3X_UART1 default 0x101f1000 if ARCH_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x11006000 if DEBUG_MT6589_UART0 default 0x16000000 if ARCH_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1093,7 +1132,9 @@ DEBUG_S3C2410_UART1) default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ DEBUG_S3C2410_UART2) + default 0x78000000 if DEBUG_CNS3XXX default 0x7c0003f8 if FOOTBRIDGE + default 0x78000000 if DEBUG_CNS3XXX default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART default 0x80230000 if DEBUG_PICOXCELL_UART @@ -1106,9 +1147,11 @@ default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xd0012000 if DEBUG_MVEBU_UART + default 0xc81004c0 if DEBUG_MESON_UARTAO default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 default 0xe0000000 if ARCH_SPEAR13XX + default 0xe4007000 if DEBUG_HIP04_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ @@ -1122,21 +1165,23 @@ default 0xffc02000 if DEBUG_SOCFPGA_UART default 0xffd82340 if ARCH_IOP13XX default 0xfff36000 if DEBUG_HIGHBANK_UART + default 0xfffe8600 if DEBUG_UART_BCM63XX default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X || \ - DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_UART_BCM63XX config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0010fe0 if ARCH_RPC default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 - default 0xf0009000 if DEBUG_CNS3XXX default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 default 0xf1000300 if DEBUG_BCM_5301X + default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf11f1000 if ARCH_VERSATILE default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 @@ -1152,16 +1197,20 @@ default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ DEBUG_S3C2410_UART2) default 0xf7fc9000 if DEBUG_BERLIN_UART + default 0xf8007000 if DEBUG_HIP04_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 default 0xfa71e000 if DEBUG_QCOM_UARTDM + default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT + default 0xfcfe8600 if DEBUG_UART_BCM63XX default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX default 0xfd012000 if ARCH_MV78XX0 default 0xfde12000 if ARCH_DOVE default 0xfe012000 if ARCH_ORION5X + default 0xf31004c0 if DEBUG_MESON_UARTAO default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART @@ -1193,8 +1242,9 @@ default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X || \ - DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_UART_BCM63XX config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0ce9d0f..034a949 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile
@@ -50,8 +50,6 @@ LD += -EL endif -comma = , - # This selects which instruction set is used. # Note that GCC does not numerically define an architecture version # macro, but instead defines a whole series of macros which makes @@ -157,6 +155,7 @@ machine-$(CONFIG_ARCH_EFM32) += efm32 machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos +machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge machine-$(CONFIG_ARCH_GEMINI) += gemini machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_HISI) += hisi @@ -168,6 +167,7 @@ machine-$(CONFIG_ARCH_KEYSTONE) += keystone machine-$(CONFIG_ARCH_KS8695) += ks8695 machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx +machine-$(CONFIG_ARCH_MESON) += meson machine-$(CONFIG_ARCH_MMP) += mmp machine-$(CONFIG_ARCH_MOXART) += moxart machine-$(CONFIG_ARCH_MSM) += msm @@ -205,7 +205,6 @@ machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 machine-$(CONFIG_ARCH_ZYNQ) += zynq -machine-$(CONFIG_FOOTBRIDGE) += footbridge machine-$(CONFIG_PLAT_SPEAR) += spear # Platform directory name. This list is sorted alphanumerically
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile index c394e30..5761f00 100644 --- a/arch/arm/boot/bootp/Makefile +++ b/arch/arm/boot/bootp/Makefile
@@ -5,6 +5,8 @@ # architecture-specific flags and dependencies. # +GCOV_PROFILE := n + LDFLAGS_bootp :=-p --no-undefined -X \ --defsym initrd_phys=$(INITRD_PHYS) \ --defsym params_phys=$(PARAMS_PHYS) -T
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 76a50ec..3ea230a 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile
@@ -37,6 +37,8 @@ OBJS += hyp-stub.o endif +GCOV_PROFILE := n + # # Architecture dependencies #
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b8c5cd3..38c89ca 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile
@@ -48,11 +48,14 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb +# sama5d4 +dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb +dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ @@ -90,6 +93,7 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb +dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \ @@ -144,8 +148,8 @@ kirkwood-openrd-client.dtb \ kirkwood-openrd-ultimate.dtb \ kirkwood-rd88f6192.dtb \ - kirkwood-rd88f6281-a0.dtb \ - kirkwood-rd88f6281-a1.dtb \ + kirkwood-rd88f6281-z0.dtb \ + kirkwood-rd88f6281-a.dtb \ kirkwood-rs212.dtb \ kirkwood-rs409.dtb \ kirkwood-rs411.dtb \ @@ -159,8 +163,11 @@ kirkwood-ts419-6282.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ + imx1-ads.dtb \ + imx1-apf9328.dtb \ imx25-eukrea-mbimxsd25-baseboard.dtb \ imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \ imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \ @@ -199,6 +206,7 @@ imx6dl-gw52xx.dtb \ imx6dl-gw53xx.dtb \ imx6dl-gw54xx.dtb \ + imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ @@ -223,6 +231,8 @@ imx6q-gw53xx.dtb \ imx6q-gw5400-a.dtb \ imx6q-gw54xx.dtb \ + imx6q-gw552x.dtb \ + imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ @@ -240,7 +250,7 @@ imx6q-tx6q-1110.dtb \ imx6sl-evk.dtb \ imx6sx-sdb.dtb \ - vf610-colibri.dtb \ + vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ @@ -286,7 +296,11 @@ omap3-devkit8000.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ - omap3-gta04.dtb \ + omap3-gta04a3.dtb \ + omap3-gta04a4.dtb \ + omap3-gta04a5.dtb \ + omap3-ha.dtb \ + omap3-ha-lcd.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ omap3-ldp.dtb \ @@ -309,6 +323,7 @@ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ + omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ am335x-bone.dtb \ @@ -339,11 +354,15 @@ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ + qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ + qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3188-radxarock.dtb \ @@ -361,7 +380,6 @@ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ - r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ @@ -372,10 +390,12 @@ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ + r8a7740-armadillo800eva.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ - r8a7779-marzen.dtb + r8a7779-marzen.dtb \ + r8a7794-alt.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ @@ -406,6 +426,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a13-hsg-h702.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb dtb-$(CONFIG_MACH_SUN6I) += \ @@ -416,7 +437,9 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ + sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ @@ -440,6 +463,7 @@ tegra114-roth.dtb \ tegra114-tn7.dtb \ tegra124-jetson-tk1.dtb \ + tegra124-nyan-big.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ @@ -491,6 +515,7 @@ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb targets += dtbs dtbs_install targets += $(dtb-y)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index bde1777..6cc25ed 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -7,9 +7,6 @@ */ / { - model = "TI AM335x BeagleBone"; - compatible = "ti,am335x-bone", "ti,am33xx"; - cpus { cpu@0 { cpu0-supply = <&dcdc2_reg>; @@ -227,6 +224,7 @@ &tps { regulators { dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; regulator-always-on; }; @@ -249,18 +247,22 @@ }; ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; regulator-always-on; }; ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; regulator-always-on; }; };
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 94ee427..83d40f7 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -10,6 +10,11 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; +}; + &ldo3_reg { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 305975d..901739f 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -10,6 +10,11 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + &ldo3_reg { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 3a0a161..8318105 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -132,11 +132,15 @@ }; }; + cm: syscon@44e10000 { + compatible = "ti,am33xx-controlmodule", "syscon"; + reg = <0x44e10000 0x800>; + }; + intc: interrupt-controller@48200000 { - compatible = "ti,omap2-intc"; + compatible = "ti,am33xx-intc"; interrupt-controller; #interrupt-cells = <1>; - ti,intc-size = <128>; reg = <0x48200000 0x1000>; }; @@ -354,6 +358,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; }; timer1: timer@44e31000 { @@ -696,6 +704,7 @@ */ interrupts = <40 41 42 43>; ranges; + syscon = <&cm>; status = "disabled"; davinci_mdio: mdio@4a101000 { @@ -726,9 +735,8 @@ }; ocmcram: ocmcram@40300000 { - compatible = "ti,am3352-ocmcram"; - reg = <0x40300000 0x10000>; - ti,hwmods = "ocmcram"; + compatible = "mmio-sram"; + reg = <0x40300000 0x10000>; /* 64k */ }; wkup_m3: wkup_m3@44d00000 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 8689949..46660ff 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi
@@ -58,10 +58,12 @@ }; am43xx_pinmux: pinmux@44e10800 { - compatible = "pinctrl-single"; + compatible = "ti,am437-padconf", "pinctrl-single"; reg = <0x44e10800 0x31c>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; @@ -168,6 +170,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; }; timer1: timer@44e31000 { @@ -885,6 +891,11 @@ clock-names = "fck"; }; }; + + ocmcram: ocmcram@40300000 { + compatible = "mmio-sram"; + reg = <0x40300000 0x40000>; /* 256k */ + }; }; };
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 416f4e5..a495e58 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -43,6 +43,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -53,11 +55,15 @@ }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id";
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 097df7d8..2b6d24e 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -91,6 +91,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -100,11 +102,15 @@ }; }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index d6d572e..3aebd93 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -101,12 +101,16 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; @@ -122,7 +126,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; @@ -143,6 +147,10 @@ marvell,nand-enable-arbiter; nand-on-flash-bbt; + /* Use Hardware BCH ECC */ + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + partition@0 { label = "u-boot"; reg = <0x0000000 0x180000>; /* 1.5MB */
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index c5fe8b5..c2f414b 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -86,6 +86,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; @@ -96,12 +98,16 @@ }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -117,7 +123,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; @@ -145,6 +151,10 @@ marvell,nand-enable-arbiter; nand-on-flash-bbt; + /* Use Hardware BCH ECC */ + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + partition@0 { label = "u-boot"; reg = <0x0000000 0x180000>; /* 1.5MB */
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 4169f40..f57a8f84 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -9,6 +9,15 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. */ /dts-v1/; @@ -30,7 +39,7 @@ }; soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; pcie-controller { @@ -50,6 +59,18 @@ }; internal-regs { + pinctrl { + fan_pins: fan-pins { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + led_pins: led-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + }; + serial@12000 { status = "okay"; }; @@ -59,6 +80,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -74,6 +97,8 @@ phy-mode = "sgmii"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -106,6 +131,26 @@ }; }; + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 3000 1>; + pinctrl-0 = <&fan_pins>; + pinctrl-names = "default"; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + sw_led { + label = "370rd:green:sw"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + nand@d0000 { status = "okay"; num-cs = <1>;
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 23227e0..83286ec 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -110,7 +110,7 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10600 0x28>; #address-cells = <1>; #size-cells = <0>; @@ -121,7 +121,7 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10680 0x28>; #address-cells = <1>; #size-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 21b588b..6b3c23b 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -151,6 +151,25 @@ "mpp62", "mpp60", "mpp58"; marvell,function = "audio"; }; + + mdio_pins: mdio-pins { + marvell,pins = "mpp17", "mpp18"; + marvell,function = "ge"; + }; + + ge0_rgmii_pins: ge0-rgmii-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "ge0"; + }; + + ge1_rgmii_pins: ge1-rgmii-pins { + marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27", "mpp28", "mpp29", "mpp30"; + marvell,function = "ge1"; + }; }; gpio0: gpio@18100 { @@ -206,6 +225,10 @@ status = "okay"; }; + sscg@18330 { + reg = <0x18330 0x4>; + }; + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; };
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index c1e49e7..de65714 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -185,6 +185,12 @@ }; }; + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + }; + spi0: spi@10600 { compatible = "marvell,orion-spi"; reg = <0x10600 0x50>;
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 0cf999a..7d8f328 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -174,7 +174,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; @@ -223,6 +223,10 @@ marvell,nand-enable-arbiter; nand-on-flash-bbt; + /* Use Hardware BCH ECC */ + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + partition@0 { label = "u-boot"; reg = <0x0000000 0x180000>; /* 1.5MB */
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts new file mode 100644 index 0000000..b5b8400 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -0,0 +1,260 @@ +/* + * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d4.dtsi" + +/ { + model = "Atmel SAMA5D4-EK"; + compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5"; + + chosen { + bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + lcd_bus@f0000000 { + status = "okay"; + + lcd@f0000000 { + status = "okay"; + }; + + lcdovl1@f0000140 { + status = "okay"; + }; + + lcdovl2@f0000240 { + status = "okay"; + }; + + lcdheo1@f0000340 { + status = "okay"; + }; + }; + + adc0: adc@fc034000 { + /* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */ + atmel,adc-vref = <3300>; + /*atmel,adc-ts-wires = <4>;*/ /* Set up ADC touch screen */ + status = "okay"; /* Enable ADC IIO support */ + }; + + mmc0: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioE 5 0>; + }; + }; + + spi0: spi@f8010000 { + cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; + status = "okay"; + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + i2c0: i2c@f8014000 { + status = "okay"; + }; + + macb0: ethernet@f8020000 { + phy-mode = "rmii"; + status = "okay"; + }; + + mmc1: mmc@fc000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 6 0>; + }; + }; + + usart2: serial@fc008000 { + status = "okay"; + }; + + usart3: serial@fc00c000 { + status = "okay"; + }; + + usart4: serial@fc010000 { + status = "okay"; + }; + + watchdog@fc068640 { + status = "okay"; + }; + + pinctrl@fc06a000 { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + <AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */ + }; + }; + }; + }; + + usb0: gadget@00400000 { + atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00500000 { + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ + &pioE 11 GPIO_ACTIVE_LOW + &pioE 12 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@00600000 { + status = "okay"; + }; + + nand0: nand@80000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + atmel,has-pmecc; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + }; +};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index bb23c2d..51416c7d 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -122,9 +122,10 @@ interrupts-extended = <&pmc AT91_PMC_LOCKB>; clocks = <&main>; reg = <1>; - atmel,clk-input-range = <1000000 5000000>; + atmel,clk-input-range = <1000000 32000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, + <190000000 240000000 2 1>; }; mck: masterck { @@ -345,10 +346,14 @@ }; }; - ramc: ramc@ffffe200 { + ramc0: ramc@ffffe200 { compatible = "atmel,at91sam9260-sdramc"; - reg = <0xffffe200 0x200 - 0xffffe800 0x200>; + reg = <0xffffe200 0x200>; + }; + + ramc1: ramc@ffffe800 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffe800 0x200>; }; pit: timer@fffffd30 { @@ -834,6 +839,7 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; clocks = <&mci0_clk>; @@ -845,6 +851,7 @@ compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; clocks = <&mci1_clk>;
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 4e0abbd..a50ee58 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -22,6 +22,10 @@ compatible = "atmel,at91sam9g20-i2c"; }; + ssc0: ssc@fffbc000 { + compatible = "atmel,at91sam9rl-ssc"; + }; + adc0: adc@fffe0000 { atmel,adc-startup-time = <40>; };
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 932a669..d3f6513 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -96,8 +96,14 @@ ramc0: ramc@ffffe400 { compatible = "atmel,at91sam9g45-ddramc"; - reg = <0xffffe400 0x200 - 0xffffe600 0x200>; + reg = <0xffffe400 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; + }; + + ramc1: ramc@ffffe600 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe600 0x200>; clocks = <&ddrck>; clock-names = "ddrck"; }; @@ -159,7 +165,7 @@ compatible = "atmel,at91rm9200-clk-master"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; atmel,clk-output-range = <0 133333333>; atmel,clk-divisors = <1 2 4 3>; }; @@ -175,7 +181,7 @@ #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; prog0: prog0 { #clock-cells = <0>; @@ -1159,6 +1165,39 @@ atmel,can-isoc; }; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + + rtc@fffffdb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffdb0 0x30>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; }; fb0: fb@0x00500000 {
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 96ccc7d..d8dd226 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -160,6 +160,10 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm_leds>; }; + + rtc@fffffdb0 { + status = "okay"; + }; }; fb0: fb@0x00500000 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 2bfac31..68eb9ad 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -87,6 +87,8 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 83d7237..13bb24e 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -136,6 +136,8 @@ }; usb0: ohci@00500000 { + num-ports = <1>; + atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; }; };
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index ab56c8b..f0b4352 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -204,7 +204,7 @@ }; ssc0: ssc@fffc0000 { - compatible = "atmel,at91rm9200-ssc"; + compatible = "atmel,at91sam9rl-ssc"; reg = <0xfffc0000 0x4000>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; @@ -213,7 +213,7 @@ }; ssc1: ssc@fffc4000 { - compatible = "atmel,at91rm9200-ssc"; + compatible = "atmel,at91sam9rl-ssc"; reg = <0xfffc4000 0x4000>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index e1a5c70..726274f 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -95,6 +95,8 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { @@ -966,7 +968,7 @@ adc0: adc@f804c000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9260-adc"; + compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&adc_clk>,
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 2a3b1c1..58a0d60 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -23,7 +23,7 @@ &gpio { pinctrl-names = "default"; - pinctrl-0 = <&gpioout &alt0 &alt3>; + pinctrl-0 = <&gpioout &alt0 &alt2 &alt3>; gpioout: gpioout { brcm,pins = <6>; @@ -39,6 +39,12 @@ brcm,pins = <48 49 50 51 52 53>; brcm,function = <7>; /* alt3 */ }; + + /* I2S interface */ + alt2: alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <6>; /* alt2 */ + }; }; &i2c0 {
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index b8473c4..3342cb1 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -99,6 +99,7 @@ dmas = <&dma 2>, <&dma 3>; dma-names = "tx", "rx"; + status = "disabled"; }; spi: spi@7e204000 {
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi new file mode 100644 index 0000000..f3bb2dd --- /dev/null +++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -0,0 +1,134 @@ +/* + * Broadcom BCM63138 DSL SoCs Device Tree + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "skeleton.dtsi" + +/ { + compatible = "brcm,bcm63138"; + model = "Broadcom BCM63138 DSL SoC"; + interrupt-parent = <&gic>; + + aliases { + uart0 = &serial0; + uart1 = &serial1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <1>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <500000000>; + }; + + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "periph"; + }; + }; + + /* ARM bus */ + axi@80000000 { + compatible = "simple-bus"; + ranges = <0 0x80000000 0x784000>; + #address-cells = <1>; + #size-cells = <1>; + + L2: cache-controller@1d000 { + compatible = "arm,pl310-cache"; + reg = <0x1d000 0x1000>; + cache-unified; + cache-level = <2>; + cache-sets = <16>; + cache-size = <0x80000>; + interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + scu: scu@1e000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1e000 0x100>; + }; + + gic: interrupt-controller@1e100 { + compatible = "arm,cortex-a9-gic"; + reg = <0x1f000 0x1000 + 0x1e100 0x100>; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + }; + + global_timer: timer@1e200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x1e200 0x20>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&arm_timer_clk>; + }; + + local_timer: local-timer@1e600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1e600 0x20>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&arm_timer_clk>; + }; + + twd_watchdog: watchdog@1e620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x1e620 0x20>; + interupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + /* Legacy UBUS base */ + ubus@fffe8000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffe8000 0x8100>; + + serial0: serial@600 { + compatible = "brcm,bcm6345-uart"; + reg = <0x600 0x1b>; + interrupts = <GIC_SPI 32 0>; + clocks = <&periph_clk>; + clock-names = "periph"; + status = "disabled"; + }; + + serial1: serial@620 { + compatible = "brcm,bcm6345-uart"; + reg = <0x620 0x1b>; + interrupts = <GIC_SPI 33 0>; + clocks = <&periph_clk>; + clock-names = "periph"; + status = "disabled"; + }; + }; +};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts new file mode 100644 index 0000000..69c9339 --- /dev/null +++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -0,0 +1,30 @@ +/* + * Broadcom BCM63138 Reference Board DTS + */ + +/dts-v1/; + +#include "bcm63138.dtsi" + +/ { + compatible = "brcm,BCM963138DVT", "brcm,bcm63138"; + model = "Broadcom BCM963138DVT"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serial0; + }; + + memory { + reg = <0x0 0x08000000>; + }; + +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +};
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index a357ce0..ea1f99b 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -45,3 +45,7 @@ &uart0 { status = "okay"; }; + +ð0 { + status = "okay"; +};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 400c40f..891d56b 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -114,6 +114,23 @@ #interrupt-cells = <3>; }; + eth0: ethernet@b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xb90000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + /* set by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + #address-cells = <1>; + #size-cells = <0>; + phy-handle = <ðphy0>; + status = "disabled"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; + cpu-ctrl@dd0000 { compatible = "marvell,berlin-cpu-ctrl"; reg = <0xdd0000 0x10000>;
diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi new file mode 100644 index 0000000..acd4fe1 --- /dev/null +++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
@@ -0,0 +1,44 @@ +/* + * Thermistor dts fragment for devices that use Thermistors as + * children of the IIO based ADC. + * + * Currently, used by Exynos5420 based Peach PIT and + * Exynos5800 based Peach PI. + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&adc { + ncp15wb473@3 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 3>; + }; + ncp15wb473@4 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + ncp15wb473@5 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 5>; + }; + ncp15wb473@6 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 6>; + }; +};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1e11e5a..4f935ad 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts
@@ -17,6 +17,18 @@ soc { pmx_core: pinmux@1c14120 { status = "okay"; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,bits = < + /* + * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR, + * AFSR, AMUTE + */ + 0x00 0x11111111 0xffffffff + /* AXR11, AXR12 */ + 0x04 0x00011000 0x000ff000 + >; + }; }; serial0: serial@1c42000 { status = "okay"; @@ -39,6 +51,20 @@ tps: tps@48 { reg = <0x48>; }; + tlv320aic3106: tlv320aic3106@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x18>; + status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vdcdc2_reg>; + /* Derived from VBAT: Baseboard 3.3V / 1.8V */ + AVDD-supply = <&vbat>; + DRVDD-supply = <&vbat>; + DVDD-supply = <&vbat>; + }; + }; wdt: wdt@1c21000 { status = "okay"; @@ -117,6 +143,33 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "DA850/OMAP-L138 EVM"; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out"; + simple-audio-card,routing = + "LINE1L", "Line In", + "LINE1R", "Line In", + "Line Out", "LLOUT", + "Line Out", "RLOUT"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + system-clock-frequency = <24576000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <24576000>; + }; + }; }; /include/ "tps6507x.dtsi" @@ -170,3 +223,22 @@ }; }; }; + +&mcasp0 { + #sound-dai-cells = <0>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index b695548..0bd98cd 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi
@@ -150,6 +150,12 @@ }; }; + edma0: edma@01c00000 { + compatible = "ti,edma3"; + reg = <0x0 0x10000>; + interrupts = <11 13 12>; + #dma-cells = <1>; + }; serial0: serial@1c42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; @@ -270,6 +276,19 @@ ti,davinci-gpio-unbanked = <0>; status = "disabled"; }; + + mcasp0: mcasp@01d00000 { + compatible = "ti,da830-mcasp-audio"; + reg = <0x100000 0x2000>, + <0x102000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <54>; + interrupt-names = "common"; + status = "disabled"; + dmas = <&edma0 1>, + <&edma0 0>; + dma-names = "tx", "rx"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand";
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index e03fbf3..c6ce625 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -323,6 +323,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; }; &uart2 { @@ -447,22 +449,19 @@ gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <40>; - gpmc,cs-wr-off-ns = <40>; + gpmc,cs-rd-off-ns = <80>; + gpmc,cs-wr-off-ns = <80>; gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <30>; - gpmc,adv-wr-off-ns = <30>; - gpmc,we-on-ns = <5>; - gpmc,we-off-ns = <25>; - gpmc,oe-on-ns = <2>; - gpmc,oe-off-ns = <20>; - gpmc,access-ns = <20>; - gpmc,wr-access-ns = <40>; - gpmc,rd-cycle-ns = <40>; - gpmc,wr-cycle-ns = <40>; - gpmc,wait-pin = <0>; - gpmc,wait-on-read; - gpmc,wait-on-write; + gpmc,adv-rd-off-ns = <60>; + gpmc,adv-wr-off-ns = <60>; + gpmc,we-on-ns = <10>; + gpmc,we-off-ns = <50>; + gpmc,oe-on-ns = <4>; + gpmc,oe-off-ns = <40>; + gpmc,access-ns = <40>; + gpmc,wr-access-ns = <80>; + gpmc,rd-cycle-ns = <80>; + gpmc,wr-cycle-ns = <80>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d678152..9cc9843 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi
@@ -89,6 +89,7 @@ prm: prm@4ae06000 { compatible = "ti,dra7-prm"; reg = <0x4ae06000 0x3000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; prm_clocks: clocks { #address-cells = <1>; @@ -217,10 +218,12 @@ }; dra7_pmx_core: pinmux@4a003400 { - compatible = "pinctrl-single"; + compatible = "ti,dra7-padconf", "pinctrl-single"; reg = <0x4a003400 0x0464>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x3fffffff>; }; @@ -328,7 +331,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -337,7 +340,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -346,7 +349,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -355,7 +358,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -364,7 +367,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -373,7 +376,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -382,7 +385,7 @@ uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -391,7 +394,7 @@ uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; - interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -400,7 +403,7 @@ uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -409,7 +412,7 @@ uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled";
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 5147023..4107428 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -19,6 +19,126 @@ }; }; +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> TP1017 (UNUSED) */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + }; +}; + &uart1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index f1ec22f..e5a3d23 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -22,4 +22,9 @@ reg = <0>; }; }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>; + }; };
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index a4e8bb9..3be544c 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -38,4 +38,10 @@ reg = <1>; }; }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>; + }; };
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 1d52de6..693a327 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -132,6 +132,12 @@ reg = <0x10020000 0x4000>; }; + mipi_phy: video-phy@10020710 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10020710 8>; + #phy-cells = <1>; + }; + pd_cam: cam-power-domain@10023C00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; @@ -163,8 +169,14 @@ #clock-cells = <1>; }; + cmu_dmc: clock-controller@105C0000 { + compatible = "samsung,exynos3250-cmu-dmc"; + reg = <0x105C0000 0x2000>; + #clock-cells = <1>; + }; + rtc: rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; + compatible = "samsung,exynos3250-rtc"; reg = <0x10070000 0x100>; interrupts = <0 73 0>, <0 74 0>; status = "disabled"; @@ -216,6 +228,33 @@ interrupts = <0 240 0>; }; + fimd: fimd@11c00000 { + compatible = "samsung,exynos3250-fimd"; + reg = <0x11c00000 0x30000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <0 84 0>, <0 85 0>, <0 86 0>; + clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; + clock-names = "sclk_fimd", "fimd"; + samsung,power-domain = <&pd_lcd0>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; + + dsi_0: dsi@11C80000 { + compatible = "samsung,exynos3250-mipi-dsi"; + reg = <0x11C80000 0x10000>; + interrupts = <0 83 0>; + samsung,phy-type = <0>; + samsung,power-domain = <&pd_lcd0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>; + clock-names = "bus_clk", "pll_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mshc_0: mshc@12510000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12510000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index adadaf9..c697ff0 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -54,17 +54,13 @@ status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; watchdog@10060000 {
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index e925c9f..de15114 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -137,17 +137,13 @@ status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; codec@13400000 {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 11967f4..5e066cd 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -520,7 +520,6 @@ mmc@12550000 { num-slots = <1>; - supports-highspeed; broken-cd; non-removable; card-detect-delay = <200>; @@ -532,11 +531,8 @@ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; serial@13800000 {
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 99b26df..0865a2e 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -675,7 +675,7 @@ sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; - samsung,pin-pud = <4>; + samsung,pin-pud = <3>; samsung,pin-drv = <3>; };
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index d0de1f5..3acd97e 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -401,7 +401,6 @@ mmc_0: mmc@12200000 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -410,17 +409,13 @@ vmmc-supply = <&mmc_reg>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc_2: mmc@12220000 { status = "okay"; num-slots = <1>; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -428,12 +423,9 @@ vmmc-supply = <&mmc_reg>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; }; i2s0: i2s@03830000 { @@ -570,8 +562,4 @@ connect-gpios = <&gpd1 7 1>; }; }; - - usb@12110000 { - usb-phy = <&usb2_phy>; - }; };
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi deleted file mode 100644 index e603e9c..0000000 --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi +++ /dev/null
@@ -1,164 +0,0 @@ -/* - * Common device tree include for all Exynos 5250 boards based off of Daisy. - * - * Copyright (c) 2012 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/ { - aliases { - }; - - memory { - reg = <0x40000000 0x80000000>; - }; - - chosen { - }; - - pinctrl@11400000 { - /* - * Disabled pullups since external part has its own pullups and - * double-pulling gets us out of spec in some cases. - */ - i2c2_bus: i2c2-bus { - samsung,pin-pud = <0>; - }; - }; - - i2c@12C60000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - }; - - i2c@12C70000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - }; - - i2c@12C80000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; - - i2c@12C90000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CA0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CB0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CD0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CE0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; - }; - - mmc@12200000 { - num-slots = <1>; - supports-highspeed; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; - }; - - mmc@12220000 { - num-slots = <1>; - supports-highspeed; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - wp-gpios = <&gpc2 1 0>; - }; - }; - - mmc@12230000 { - num-slots = <1>; - supports-highspeed; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - /* See board-specific dts files for pin setup */ - - slot@0 { - reg = <0>; - bus-width = <4>; - }; - }; - - spi_1: spi@12d30000 { - status = "okay"; - samsung,spi-src-clk = <0>; - num-cs = <1>; - }; - - hdmi { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; - ddc = <&i2c_2>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power { - label = "Power"; - gpios = <&gpx1 3 1>; - linux,code = <116>; /* KEY_POWER */ - gpio-key,wakeup; - }; - }; -};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index b4b35ad..6a0f4c0 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -284,7 +284,6 @@ mmc@12200000 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -292,29 +291,22 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc@12220000 { status = "okay"; num-slots = <1>; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; }; spi_1: spi@12d30000 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index f2b8c41..e51fcef 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -9,8 +9,8 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "exynos5250.dtsi" -#include "exynos5250-cros-common.dtsi" / { model = "Google Snow"; @@ -20,6 +20,13 @@ i2c104 = &i2c_104; }; + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + }; + rtc@101E0000 { status = "okay"; }; @@ -93,6 +100,13 @@ gpio-keys { compatible = "gpio-keys"; + power { + label = "Power"; + gpios = <&gpx1 3 1>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + lid-switch { label = "Lid"; gpios = <&gpx3 5 1>; @@ -181,7 +195,7 @@ dcdc3 { ti,enable-ext-control; }; - fet1 { + fet1: fet1 { regulator-name = "vcd_led"; ti,overcurrent-wait = <3>; }; @@ -204,7 +218,7 @@ regulator-always-on; ti,overcurrent-wait = <3>; }; - fet6 { + fet6: fet6 { regulator-name = "lcd_vdd"; ti,overcurrent-wait = <3>; }; @@ -226,26 +240,6 @@ }; }; - mmc@12200000 { - status = "okay"; - }; - - mmc@12220000 { - status = "okay"; - }; - - /* - * On Snow we've got SIP WiFi and so can keep drive strengths low to - * reduce EMI. - */ - mmc@12230000 { - status = "okay"; - slot@0 { - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; - }; - }; - i2c@12CD0000 { max98095: codec@11 { compatible = "maxim,max98095"; @@ -253,6 +247,15 @@ pinctrl-0 = <&max98095_en>; pinctrl-names = "default"; }; + + ptn3460: lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; + edid-emulation = <5>; + panel = <&panel>; + }; }; i2s0: i2s@03830000 { @@ -294,17 +297,24 @@ }; hdmi { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; hdmi-en-supply = <&tps65090_fet7>; vdd-supply = <&ldo8_reg>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -314,6 +324,12 @@ samsung,invert-vclk; }; + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&fet6>; + backlight = <&backlight>; + }; + dp-controller@145B0000 { status = "okay"; pinctrl-names = "default"; @@ -325,26 +341,15 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx0 7 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; + bridge = <&ptn3460>; }; }; &i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; @@ -491,6 +496,10 @@ }; &i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + trackpad { reg = <0x67>; compatible = "cypress,cyapa"; @@ -500,6 +509,106 @@ }; }; +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + wp-gpios = <&gpc2 1 0>; + cap-sd-highspeed; +}; + +/* + * On Snow we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_3 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + &pinctrl_0 { max77686_irq: max77686-irq { samsung,pins = "gpx3-2"; @@ -509,4 +618,10 @@ }; }; +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; +}; + #include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 492e1ef..f21b9aa 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -603,21 +603,6 @@ }; }; - usb2_phy: usbphy@12130000 { - compatible = "samsung,exynos5250-usb2phy"; - reg = <0x12130000 0x100>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>; - clock-names = "ext_xtal", "usbhost"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbphy-sys { - reg = <0x10040704 0x8>, - <0x10050230 0x4>; - }; - }; - usb2_phy_gen: phy@12130000 { compatible = "samsung,exynos5250-usb2-phy"; reg = <0x12130000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 8c84ab2..a803b60 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -69,7 +69,7 @@ num-slots = <1>; broken-cd; bypass-smu; - supports-highspeed; + cap-mmc-highspeed; supports-hs200-mode; /* 200 Mhz */ card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -77,27 +77,19 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; };
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 7275bbd..be3e025 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -40,33 +40,25 @@ &mmc_0 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &uart0 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 434fd9d..aa7a7d7 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -50,7 +50,6 @@ mmc@12200000 { status = "okay"; broken-cd; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -58,28 +57,22 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; vmmc-supply = <&ldo10_reg>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc@12220000 { status = "okay"; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - vmmc-supply = <&ldo10_reg>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; + bus-width = <4>; + cap-sd-highspeed; }; hsi2c_4: i2c@12CA0000 { @@ -375,3 +368,7 @@ }; }; }; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 228a6b1..82cdb74 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -11,6 +11,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos5420.dtsi" / { @@ -30,11 +31,12 @@ i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + power-supply = <&tps65090_fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -100,6 +102,17 @@ regulator-boot-on; regulator-always-on; }; + + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&tps65090_fet6>; + backlight = <&backlight>; + }; +}; + +&adc { + status = "okay"; + vdd-supply = <&ldo9_reg>; }; &dp { @@ -113,22 +126,7 @@ samsung,link-rate = <0x06>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; + bridge = <&ps8625>; }; &fimd { @@ -142,10 +140,348 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; + + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&hsi2c_4 { + status = "okay"; + clock-frequency = <400000>; + + max77802-pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2v"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "vdd_1v2_2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_1v8_3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vqmmc_sdcard: ldo4_reg: LDO4 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_1v8_5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_1v8_6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_1v8_7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + ldo18_reg: LDO18 { + regulator-name = "ldo_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "ldo_19"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "ldo_20"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "ldo_21"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "ldo_23"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo24_reg: LDO24 { + regulator-name = "ldo_24"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "ldo_25"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "ldo_26"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "ldo_27"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "ldo_28"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "ldo_29"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo32_reg: LDO32 { + regulator-name = "ldo_32"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "ldo_33"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo34_reg: LDO34 { + regulator-name = "ldo_34"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; }; &hsi2c_7 { status = "okay"; + clock-frequency = <400000>; max98090: codec@10 { compatible = "maxim,max98090"; @@ -155,6 +491,44 @@ pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; }; + + light-sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + vcc-supply = <&tps65090_fet5>; + }; + + ps8625: lvds-bridge@48 { + compatible = "parade,ps8625"; + reg = <0x48>; + sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>; + lane-count = <2>; + panel = <&panel>; + use-external-pwm; + }; +}; + +&hsi2c_8 { + status = "okay"; + clock-frequency = <333000>; + + /* Atmel mXT336S */ + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED /* GPIO0 */ + KEY_RESERVED /* GPIO1 */ + KEY_RESERVED /* GPIO2 */ + BTN_LEFT>; /* GPIO3 */ + }; }; &hsi2c_9 { @@ -187,7 +561,7 @@ num-slots = <1>; broken-cd; caps2-mmc-hs200-1_8v; - supports-highspeed; + cap-mmc-highspeed; non-removable; card-detect-delay = <200>; clock-frequency = <400000000>; @@ -196,17 +570,13 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <3>; @@ -214,11 +584,7 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; }; @@ -249,6 +615,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-2"; samsung,pin-function = <0>; @@ -277,12 +650,42 @@ samsung,pin-drv = <0>; }; + max77802_irq: max77802-irq { + samsung,pins = "gpx3-1"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpy7-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpj4-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpj4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &pinctrl_3 { @@ -312,6 +715,14 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + pmic_selb: pmic-selb { + samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5", + "gph0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &rtc { @@ -365,12 +776,12 @@ vsys2-supply = <&vbat>; vsys3-supply = <&vbat>; infet1-supply = <&vbat>; - infet2-supply = <&vbat>; - infet3-supply = <&vbat>; - infet4-supply = <&vbat>; - infet5-supply = <&vbat>; - infet6-supply = <&vbat>; - infet7-supply = <&vbat>; + infet2-supply = <&tps65090_dcdc1>; + infet3-supply = <&tps65090_dcdc2>; + infet4-supply = <&tps65090_dcdc2>; + infet5-supply = <&tps65090_dcdc2>; + infet6-supply = <&tps65090_dcdc2>; + infet7-supply = <&tps65090_dcdc1>; vsys-l1-supply = <&vbat>; vsys-l2-supply = <&vbat>; @@ -427,6 +838,14 @@ status = "okay"; }; +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + &usbdrd_phy0 { vbus-supply = <&usb300_vbus_reg>; }; @@ -445,3 +864,4 @@ }; #include "cros-ec-keyboard.dtsi" +#include "cros-adc-thermistors.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 6052aa9..8be3d7b 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -76,34 +76,26 @@ mmc@12200000 { status = "okay"; broken-cd; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc@12220000 { status = "okay"; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; dp-controller@145B0000 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index bfe056d..8617a03 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -815,7 +815,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3_0: dwc3 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; @@ -841,7 +841,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3_1: dwc3 { compatible = "snps,dwc3"; reg = <0x12400000 0x10000>; interrupts = <0 73 0>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index f3ee48b..7bb1c8d 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -11,6 +11,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos5800.dtsi" / { @@ -28,11 +29,13 @@ i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + power-supply = <&tps65090_fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -98,6 +101,17 @@ regulator-boot-on; regulator-always-on; }; + + panel: panel { + compatible = "auo,b133htn01"; + power-supply = <&tps65090_fet6>; + backlight = <&backlight>; + }; +}; + +&adc { + status = "okay"; + vdd-supply = <&ldo9_reg>; }; &dp { @@ -111,22 +125,7 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <150660000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <60>; - hback-porch = <172>; - hsync-len = <80>; - vback-porch = <25>; - vfront-porch = <10>; - vsync-len = <10>; - }; - }; + panel = <&panel>; }; &fimd { @@ -140,10 +139,348 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; + + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&hsi2c_4 { + status = "okay"; + clock-frequency = <400000>; + + max77802-pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2v"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "vdd_1v2_2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_1v8_3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vqmmc_sdcard: ldo4_reg: LDO4 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_1v8_5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_1v8_6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_1v8_7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + ldo18_reg: LDO18 { + regulator-name = "ldo_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "ldo_19"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "ldo_20"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "ldo_21"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "ldo_23"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo24_reg: LDO24 { + regulator-name = "ldo_24"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "ldo_25"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "ldo_26"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "ldo_27"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "ldo_28"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "ldo_29"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo32_reg: LDO32 { + regulator-name = "ldo_32"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "ldo_33"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo34_reg: LDO34 { + regulator-name = "ldo_34"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; }; &hsi2c_7 { status = "okay"; + clock-frequency = <400000>; max98091: codec@10 { compatible = "maxim,max98091"; @@ -153,6 +490,33 @@ pinctrl-names = "default"; pinctrl-0 = <&max98091_irq>; }; + + light-sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + vcc-supply = <&tps65090_fet5>; + }; +}; + +&hsi2c_8 { + status = "okay"; + clock-frequency = <333000>; + /* Atmel mXT540S */ + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED /* GPIO 0 */ + KEY_RESERVED /* GPIO 1 */ + BTN_LEFT /* GPIO 2 */ + KEY_RESERVED>; /* GPIO 3 */ + }; }; &hsi2c_9 { @@ -185,7 +549,7 @@ num-slots = <1>; broken-cd; caps2-mmc-hs200-1_8v; - supports-highspeed; + cap-mmc-highspeed; non-removable; card-detect-delay = <200>; clock-frequency = <400000000>; @@ -194,17 +558,13 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <3>; @@ -212,11 +572,7 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; }; @@ -247,6 +603,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-2"; samsung,pin-function = <0>; @@ -275,12 +638,42 @@ samsung,pin-drv = <0>; }; + max77802_irq: max77802-irq { + samsung,pins = "gpx3-1"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpy7-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpj4-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpj4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &pinctrl_3 { @@ -310,6 +703,14 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + pmic_selb: pmic-selb { + samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5", + "gph0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &rtc { @@ -363,12 +764,12 @@ vsys2-supply = <&vbat>; vsys3-supply = <&vbat>; infet1-supply = <&vbat>; - infet2-supply = <&vbat>; - infet3-supply = <&vbat>; - infet4-supply = <&vbat>; - infet5-supply = <&vbat>; - infet6-supply = <&vbat>; - infet7-supply = <&vbat>; + infet2-supply = <&tps65090_dcdc1>; + infet3-supply = <&tps65090_dcdc2>; + infet4-supply = <&tps65090_dcdc2>; + infet5-supply = <&tps65090_dcdc2>; + infet6-supply = <&tps65090_dcdc2>; + infet7-supply = <&tps65090_dcdc1>; vsys-l1-supply = <&vbat>; vsys-l2-supply = <&vbat>; @@ -425,6 +826,14 @@ status = "okay"; }; +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + &usbdrd_phy0 { vbus-supply = <&usb300_vbus_reg>; }; @@ -443,3 +852,4 @@ }; #include "cros-ec-keyboard.dtsi" +#include "cros-adc-thermistors.dtsi"
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts new file mode 100644 index 0000000..40a9e33 --- /dev/null +++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -0,0 +1,32 @@ +/* + * Copyright (C) 2013-2014 Linaro Ltd. + * Author: Haojian Zhuang <haojian.zhuang@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; + +#include "hip04.dtsi" + +/ { + /* memory bus is 64-bit */ + #address-cells = <2>; + #size-cells = <2>; + model = "Hisilicon D01 Development Board"; + compatible = "hisilicon,hip04-d01"; + + memory@00000000,10000000 { + device_type = "memory"; + reg = <0x00000000 0x10000000 0x00000000 0xc0000000>, + <0x00000004 0xc0000000 0x00000003 0x40000000>; + }; + + soc { + uart0: uart@4007000 { + status = "ok"; + }; + }; +};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi new file mode 100644 index 0000000..93b6c90 --- /dev/null +++ b/arch/arm/boot/dts/hip04.dtsi
@@ -0,0 +1,267 @@ +/* + * Hisilicon Ltd. HiP04 SoC + * + * Copyright (C) 2013-2014 Hisilicon Ltd. + * Copyright (C) 2013-2014 Linaro Ltd. + * + * Author: Haojian Zhuang <haojian.zhuang@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + /* memory bus is 64-bit */ + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + }; + + bootwrapper { + compatible = "hisilicon,hip04-bootwrapper"; + boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + cluster2 { + core0 { + cpu = <&CPU8>; + }; + core1 { + cpu = <&CPU9>; + }; + core2 { + cpu = <&CPU10>; + }; + core3 { + cpu = <&CPU11>; + }; + }; + cluster3 { + core0 { + cpu = <&CPU12>; + }; + core1 { + cpu = <&CPU13>; + }; + core2 { + cpu = <&CPU14>; + }; + core3 { + cpu = <&CPU15>; + }; + }; + }; + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + }; + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + }; + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x100>; + }; + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x101>; + }; + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x102>; + }; + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x103>; + }; + CPU8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x200>; + }; + CPU9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x201>; + }; + CPU10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x202>; + }; + CPU11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x203>; + }; + CPU12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x300>; + }; + CPU13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x301>; + }; + CPU14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x302>; + }; + CPU15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x303>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + clk_50m: clk_50m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + clk_168m: clk_168m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <168000000>; + }; + + soc { + /* It's a 32-bit SoC. */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0 0 0xe0000000 0x10000000>; + + gic: interrupt-controller@c01000 { + compatible = "hisilicon,hip04-intc"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + interrupts = <1 9 0xf04>; + + reg = <0xc01000 0x1000>, <0xc02000 0x1000>, + <0xc04000 0x2000>, <0xc06000 0x2000>; + }; + + sysctrl: sysctrl { + compatible = "hisilicon,sysctrl"; + reg = <0x3e00000 0x00100000>; + }; + + fabric: fabric { + compatible = "hisilicon,hip04-fabric"; + reg = <0x302a000 0x1000>; + }; + + dual_timer0: dual_timer@3000000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x3000000 0x1000>; + interrupts = <0 224 4>; + clocks = <&clk_50m>, <&clk_50m>; + clock-names = "apb_pclk"; + }; + + arm-pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <0 64 4>, + <0 65 4>, + <0 66 4>, + <0 67 4>, + <0 68 4>, + <0 69 4>, + <0 70 4>, + <0 71 4>, + <0 72 4>, + <0 73 4>, + <0 74 4>, + <0 75 4>, + <0 76 4>, + <0 77 4>, + <0 78 4>, + <0 79 4>; + }; + + uart0: uart@4007000 { + compatible = "snps,dw-apb-uart"; + reg = <0x4007000 0x1000>; + interrupts = <0 381 4>; + clocks = <&clk_168m>; + clock-names = "uartclk"; + reg-shift = <2>; + status = "disabled"; + }; + + sata0: sata@a000000 { + compatible = "hisilicon,hisi-ahci"; + reg = <0xa000000 0x1000000>; + interrupts = <0 372 4>; + }; + + }; +};
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts new file mode 100644 index 0000000..af4eee5 --- /dev/null +++ b/arch/arm/boot/dts/imx1-ads.dts
@@ -0,0 +1,152 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx1.dtsi" + +/ { + model = "Freescale MX1 ADS"; + compatible = "fsl,imx1ads", "fsl,imx1"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x08000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + clk32 { + compatible = "fsl,imx-clk32", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; +}; + +&cspi1 { + pinctrl-0 = <&pinctrl_cspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c>; + status = "okay"; + + extgpio0: pcf8575@22 { + compatible = "nxp,pcf8575"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + extgpio1: pcf8575@24 { + compatible = "nxp,pcf8575"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + nor: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <4>; + fsl,weim-cs-timing = <0x00003e00 0x00000801>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&iomuxc { + imx1-ads { + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX1_PAD_SPI1_MISO__SPI1_MISO 0x0 + MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x0 + MX1_PAD_SPI1_RDY__SPI1_RDY 0x0 + MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x0 + MX1_PAD_SPI1_SS__GPIO3_15 0x0 + >; + }; + + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; + }; + }; +};
diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts new file mode 100644 index 0000000..07d92fb --- /dev/null +++ b/arch/arm/boot/dts/imx1-apf9328.dts
@@ -0,0 +1,129 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx1.dtsi" + +/ { + model = "Armadeus APF9328"; + compatible = "armadeus,imx1-apf9328", "fsl,imx1"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x08000000 0x00800000>; + }; +}; + +&i2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + nor: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00330e04 0x00000d01>; + #address-cells = <1>; + #size-cells = <1>; + }; + + eth: eth@4,c00000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth>; + compatible = "davicom,dm9000"; + reg = < + 4 0x00c00000 0x2 + 4 0x00c00002 0x2 + >; + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + fsl,weim-cs-timing = <0x0000c700 0x19190d01>; + }; +}; + +&iomuxc { + imx1-apf9328 { + pinctrl_eth: ethgrp { + fsl,pins = < + MX1_PAD_SIM_SVEN__GPIO2_14 0x0 + >; + }; + + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; + }; + }; +};
diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h new file mode 100644 index 0000000..22bec8b --- /dev/null +++ b/arch/arm/boot/dts/imx1-pinfunc.h
@@ -0,0 +1,302 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DTS_IMX1_PINFUNC_H +#define __DTS_IMX1_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <pin mux_id> + * mux_id consists of + * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10) + * + * function: 0 - Primary function + * 1 - Alternate function + * 2 - GPIO + * direction: 0 - Input + * 1 - Output + * gpio_oconf: 0 - A_IN + * 1 - B_IN + * 2 - A_OUT + * 3 - Data Register + * gpio_iconfa/b: 0 - GPIO_IN + * 1 - Interrupt Status Register + * 2 - 0 + * 3 - 1 + * + * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable + * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin + * number on the specific port (between 0 and 31). + */ + +#define MX1_PAD_A24__A24 0x00 0x004 +#define MX1_PAD_A24__GPIO1_0 0x00 0x032 +#define MX1_PAD_A24__SPI2_CLK 0x00 0x006 +#define MX1_PAD_TIN__TIN 0x01 0x000 +#define MX1_PAD_TIN__GPIO1_1 0x01 0x032 +#define MX1_PAD_TIN__SPI2_RXD 0x01 0x022 +#define MX1_PAD_PWMO__PWMO 0x02 0x004 +#define MX1_PAD_PWMO__GPIO1_2 0x02 0x032 +#define MX1_PAD_CSI_MCLK__CSI_MCLK 0x03 0x004 +#define MX1_PAD_CSI_MCLK__GPIO1_3 0x03 0x032 +#define MX1_PAD_CSI_D0__CSI_D0 0x04 0x000 +#define MX1_PAD_CSI_D0__GPIO1_4 0x04 0x032 +#define MX1_PAD_CSI_D1__CSI_D1 0x05 0x000 +#define MX1_PAD_CSI_D1__GPIO1_5 0x05 0x032 +#define MX1_PAD_CSI_D2__CSI_D2 0x06 0x000 +#define MX1_PAD_CSI_D2__GPIO1_6 0x06 0x032 +#define MX1_PAD_CSI_D3__CSI_D3 0x07 0x000 +#define MX1_PAD_CSI_D3__GPIO1_7 0x07 0x032 +#define MX1_PAD_CSI_D4__CSI_D4 0x08 0x000 +#define MX1_PAD_CSI_D4__GPIO1_8 0x08 0x032 +#define MX1_PAD_CSI_D5__CSI_D5 0x09 0x000 +#define MX1_PAD_CSI_D5__GPIO1_9 0x09 0x032 +#define MX1_PAD_CSI_D6__CSI_D6 0x0a 0x000 +#define MX1_PAD_CSI_D6__GPIO1_10 0x0a 0x032 +#define MX1_PAD_CSI_D7__CSI_D7 0x0b 0x000 +#define MX1_PAD_CSI_D7__GPIO1_11 0x0b 0x032 +#define MX1_PAD_CSI_VSYNC__CSI_VSYNC 0x0c 0x000 +#define MX1_PAD_CSI_VSYNC__GPIO1_12 0x0c 0x032 +#define MX1_PAD_CSI_HSYNC__CSI_HSYNC 0x0d 0x000 +#define MX1_PAD_CSI_HSYNC__GPIO1_13 0x0d 0x032 +#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK 0x0e 0x000 +#define MX1_PAD_CSI_PIXCLK__GPIO1_14 0x0e 0x032 +#define MX1_PAD_I2C_SDA__I2C_SDA 0x0f 0x000 +#define MX1_PAD_I2C_SDA__GPIO1_15 0x0f 0x032 +#define MX1_PAD_I2C_SCL__I2C_SCL 0x10 0x004 +#define MX1_PAD_I2C_SCL__GPIO1_16 0x10 0x032 +#define MX1_PAD_DTACK__DTACK 0x11 0x000 +#define MX1_PAD_DTACK__GPIO1_17 0x11 0x032 +#define MX1_PAD_DTACK__SPI2_SS 0x11 0x002 +#define MX1_PAD_DTACK__A25 0x11 0x016 +#define MX1_PAD_BCLK__BCLK 0x12 0x004 +#define MX1_PAD_BCLK__GPIO1_18 0x12 0x032 +#define MX1_PAD_LBA__LBA 0x13 0x004 +#define MX1_PAD_LBA__GPIO1_19 0x13 0x032 +#define MX1_PAD_ECB__ECB 0x14 0x000 +#define MX1_PAD_ECB__GPIO1_20 0x14 0x032 +#define MX1_PAD_A0__A0 0x15 0x004 +#define MX1_PAD_A0__GPIO1_21 0x15 0x032 +#define MX1_PAD_CS4__CS4 0x16 0x004 +#define MX1_PAD_CS4__GPIO1_22 0x16 0x032 +#define MX1_PAD_CS5__CS5 0x17 0x004 +#define MX1_PAD_CS5__GPIO1_23 0x17 0x032 +#define MX1_PAD_A16__A16 0x18 0x004 +#define MX1_PAD_A16__GPIO1_24 0x18 0x032 +#define MX1_PAD_A17__A17 0x19 0x004 +#define MX1_PAD_A17__GPIO1_25 0x19 0x032 +#define MX1_PAD_A18__A18 0x1a 0x004 +#define MX1_PAD_A18__GPIO1_26 0x1a 0x032 +#define MX1_PAD_A19__A19 0x1b 0x004 +#define MX1_PAD_A19__GPIO1_27 0x1b 0x032 +#define MX1_PAD_A20__A20 0x1c 0x004 +#define MX1_PAD_A20__GPIO1_28 0x1c 0x032 +#define MX1_PAD_A21__A21 0x1d 0x004 +#define MX1_PAD_A21__GPIO1_29 0x1d 0x032 +#define MX1_PAD_A22__A22 0x1e 0x004 +#define MX1_PAD_A22__GPIO1_30 0x1e 0x032 +#define MX1_PAD_A23__A23 0x1f 0x004 +#define MX1_PAD_A23__GPIO1_31 0x1f 0x032 +#define MX1_PAD_SD_DAT0__SD_DAT0 0x28 0x000 +#define MX1_PAD_SD_DAT0__MS_PI0 0x28 0x001 +#define MX1_PAD_SD_DAT0__GPIO2_8 0x28 0x032 +#define MX1_PAD_SD_DAT1__SD_DAT1 0x29 0x000 +#define MX1_PAD_SD_DAT1__MS_PI1 0x29 0x001 +#define MX1_PAD_SD_DAT1__GPIO2_9 0x29 0x032 +#define MX1_PAD_SD_DAT2__SD_DAT2 0x2a 0x000 +#define MX1_PAD_SD_DAT2__MS_SCLKI 0x2a 0x001 +#define MX1_PAD_SD_DAT2__GPIO2_10 0x2a 0x032 +#define MX1_PAD_SD_DAT3__SD_DAT3 0x2b 0x000 +#define MX1_PAD_SD_DAT3__MS_SDIO 0x2b 0x001 +#define MX1_PAD_SD_DAT3__GPIO2_11 0x2b 0x032 +#define MX1_PAD_SD_SCLK__SD_SCLK 0x2c 0x004 +#define MX1_PAD_SD_SCLK__MS_SCLKO 0x2c 0x005 +#define MX1_PAD_SD_SCLK__GPIO2_12 0x2c 0x032 +#define MX1_PAD_SD_CMD__SD_CMD 0x2d 0x000 +#define MX1_PAD_SD_CMD__MS_BS 0x2d 0x005 +#define MX1_PAD_SD_CMD__GPIO2_13 0x2d 0x032 +#define MX1_PAD_SIM_SVEN__SIM_SVEN 0x2e 0x004 +#define MX1_PAD_SIM_SVEN__SSI_RXFS 0x2e 0x001 +#define MX1_PAD_SIM_SVEN__GPIO2_14 0x2e 0x032 +#define MX1_PAD_SIM_PD__SIM_PD 0x2f 0x000 +#define MX1_PAD_SIM_PD__SSI_RXCLK 0x2f 0x001 +#define MX1_PAD_SIM_PD__GPIO2_15 0x2f 0x032 +#define MX1_PAD_SIM_TX__SIM_TX 0x30 0x000 +#define MX1_PAD_SIM_TX__SSI_RXDAT 0x30 0x001 +#define MX1_PAD_SIM_TX__GPIO2_16 0x30 0x032 +#define MX1_PAD_SIM_RX__SIM_RX 0x31 0x000 +#define MX1_PAD_SIM_RX__SSI_TXDAT 0x31 0x005 +#define MX1_PAD_SIM_RX__GPIO2_17 0x31 0x032 +#define MX1_PAD_SIM_RST__SIM_RST 0x32 0x004 +#define MX1_PAD_SIM_RST__SSI_TXFS 0x32 0x001 +#define MX1_PAD_SIM_RST__GPIO2_18 0x32 0x032 +#define MX1_PAD_SIM_CLK__SIM_CLK 0x33 0x004 +#define MX1_PAD_SIM_CLK__SSI_TXCLK 0x33 0x001 +#define MX1_PAD_SIM_CLK__GPIO2_19 0x33 0x032 +#define MX1_PAD_USBD_AFE__USBD_AFE 0x34 0x004 +#define MX1_PAD_USBD_AFE__GPIO2_20 0x34 0x032 +#define MX1_PAD_USBD_OE__USBD_OE 0x35 0x004 +#define MX1_PAD_USBD_OE__GPIO2_21 0x35 0x032 +#define MX1_PAD_USBD_RCV__USBD_RCV 0x36 0x000 +#define MX1_PAD_USBD_RCV__GPIO2_22 0x36 0x032 +#define MX1_PAD_USBD_SUSPND__USBD_SUSPND 0x37 0x004 +#define MX1_PAD_USBD_SUSPND__GPIO2_23 0x37 0x032 +#define MX1_PAD_USBD_VP__USBD_VP 0x38 0x000 +#define MX1_PAD_USBD_VP__GPIO2_24 0x38 0x032 +#define MX1_PAD_USBD_VM__USBD_VM 0x39 0x000 +#define MX1_PAD_USBD_VM__GPIO2_25 0x39 0x032 +#define MX1_PAD_USBD_VPO__USBD_VPO 0x3a 0x004 +#define MX1_PAD_USBD_VPO__GPIO2_26 0x3a 0x032 +#define MX1_PAD_USBD_VMO__USBD_VMO 0x3b 0x004 +#define MX1_PAD_USBD_VMO__GPIO2_27 0x3b 0x032 +#define MX1_PAD_UART2_CTS__UART2_CTS 0x3c 0x004 +#define MX1_PAD_UART2_CTS__GPIO2_28 0x3c 0x032 +#define MX1_PAD_UART2_RTS__UART2_RTS 0x3d 0x000 +#define MX1_PAD_UART2_RTS__GPIO2_29 0x3d 0x032 +#define MX1_PAD_UART2_TXD__UART2_TXD 0x3e 0x004 +#define MX1_PAD_UART2_TXD__GPIO2_30 0x3e 0x032 +#define MX1_PAD_UART2_RXD__UART2_RXD 0x3f 0x000 +#define MX1_PAD_UART2_RXD__GPIO2_31 0x3f 0x032 +#define MX1_PAD_SSI_RXFS__SSI_RXFS 0x43 0x000 +#define MX1_PAD_SSI_RXFS__GPIO3_3 0x43 0x032 +#define MX1_PAD_SSI_RXCLK__SSI_RXCLK 0x44 0x000 +#define MX1_PAD_SSI_RXCLK__GPIO3_4 0x44 0x032 +#define MX1_PAD_SSI_RXDAT__SSI_RXDAT 0x45 0x000 +#define MX1_PAD_SSI_RXDAT__GPIO3_5 0x45 0x032 +#define MX1_PAD_SSI_TXDAT__SSI_TXDAT 0x46 0x004 +#define MX1_PAD_SSI_TXDAT__GPIO3_6 0x46 0x032 +#define MX1_PAD_SSI_TXFS__SSI_TXFS 0x47 0x000 +#define MX1_PAD_SSI_TXFS__GPIO3_7 0x47 0x032 +#define MX1_PAD_SSI_TXCLK__SSI_TXCLK 0x48 0x000 +#define MX1_PAD_SSI_TXCLK__GPIO3_8 0x48 0x032 +#define MX1_PAD_UART1_CTS__UART1_CTS 0x49 0x004 +#define MX1_PAD_UART1_CTS__GPIO3_9 0x49 0x032 +#define MX1_PAD_UART1_RTS__UART1_RTS 0x4a 0x000 +#define MX1_PAD_UART1_RTS__GPIO3_10 0x4a 0x032 +#define MX1_PAD_UART1_TXD__UART1_TXD 0x4b 0x004 +#define MX1_PAD_UART1_TXD__GPIO3_11 0x4b 0x032 +#define MX1_PAD_UART1_RXD__UART1_RXD 0x4c 0x000 +#define MX1_PAD_UART1_RXD__GPIO3_12 0x4c 0x032 +#define MX1_PAD_SPI1_RDY__SPI1_RDY 0x4d 0x000 +#define MX1_PAD_SPI1_RDY__GPIO3_13 0x4d 0x032 +#define MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x4e 0x004 +#define MX1_PAD_SPI1_SCLK__GPIO3_14 0x4e 0x032 +#define MX1_PAD_SPI1_SS__SPI1_SS 0x4f 0x000 +#define MX1_PAD_SPI1_SS__GPIO3_15 0x4f 0x032 +#define MX1_PAD_SPI1_MISO__SPI1_MISO 0x50 0x000 +#define MX1_PAD_SPI1_MISO__GPIO3_16 0x50 0x032 +#define MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x51 0x004 +#define MX1_PAD_SPI1_MOSI__GPIO3_17 0x51 0x032 +#define MX1_PAD_BT13__BT13 0x53 0x004 +#define MX1_PAD_BT13__SSI2_RXCLK 0x53 0x001 +#define MX1_PAD_BT13__GPIO3_19 0x53 0x032 +#define MX1_PAD_BT12__BT12 0x54 0x004 +#define MX1_PAD_BT12__SSI2_TXFS 0x54 0x001 +#define MX1_PAD_BT12__GPIO3_20 0x54 0x032 +#define MX1_PAD_BT11__BT11 0x55 0x004 +#define MX1_PAD_BT11__SSI2_TXCLK 0x55 0x001 +#define MX1_PAD_BT11__GPIO3_21 0x55 0x032 +#define MX1_PAD_BT10__BT10 0x56 0x004 +#define MX1_PAD_BT10__SSI2_TX 0x56 0x001 +#define MX1_PAD_BT10__GPIO3_22 0x56 0x032 +#define MX1_PAD_BT9__BT9 0x57 0x004 +#define MX1_PAD_BT9__SSI2_RX 0x57 0x001 +#define MX1_PAD_BT9__GPIO3_23 0x57 0x032 +#define MX1_PAD_BT8__BT8 0x58 0x004 +#define MX1_PAD_BT8__SSI2_RXFS 0x58 0x001 +#define MX1_PAD_BT8__GPIO3_24 0x58 0x032 +#define MX1_PAD_BT8__UART3_RI 0x58 0x016 +#define MX1_PAD_BT7__BT7 0x59 0x004 +#define MX1_PAD_BT7__GPIO3_25 0x59 0x032 +#define MX1_PAD_BT7__UART3_DSR 0x59 0x016 +#define MX1_PAD_BT6__BT6 0x5a 0x004 +#define MX1_PAD_BT6__GPIO3_26 0x5a 0x032 +#define MX1_PAD_BT6__SPI2_SS3 0x5a 0x016 +#define MX1_PAD_BT6__UART3_DTR 0x5a 0x022 +#define MX1_PAD_BT5__BT5 0x5b 0x000 +#define MX1_PAD_BT5__GPIO3_27 0x5b 0x032 +#define MX1_PAD_BT5__UART3_DCD 0x5b 0x016 +#define MX1_PAD_BT4__BT4 0x5c 0x000 +#define MX1_PAD_BT4__GPIO3_28 0x5c 0x032 +#define MX1_PAD_BT4__UART3_CTS 0x5c 0x016 +#define MX1_PAD_BT3__BT3 0x5d 0x000 +#define MX1_PAD_BT3__GPIO3_29 0x5d 0x032 +#define MX1_PAD_BT3__UART3_RTS 0x5d 0x022 +#define MX1_PAD_BT2__BT2 0x5e 0x004 +#define MX1_PAD_BT2__GPIO3_30 0x5e 0x032 +#define MX1_PAD_BT2__UART3_TX 0x5e 0x016 +#define MX1_PAD_BT1__BT1 0x5f 0x000 +#define MX1_PAD_BT1__GPIO3_31 0x5f 0x032 +#define MX1_PAD_BT1__UART3_RX 0x5f 0x022 +#define MX1_PAD_LSCLK__LSCLK 0x66 0x004 +#define MX1_PAD_LSCLK__GPIO4_6 0x66 0x032 +#define MX1_PAD_REV__REV 0x67 0x004 +#define MX1_PAD_REV__UART2_DTR 0x67 0x001 +#define MX1_PAD_REV__GPIO4_7 0x67 0x032 +#define MX1_PAD_REV__SPI2_CLK 0x67 0x006 +#define MX1_PAD_CLS__CLS 0x68 0x004 +#define MX1_PAD_CLS__UART2_DCD 0x68 0x005 +#define MX1_PAD_CLS__GPIO4_8 0x68 0x032 +#define MX1_PAD_CLS__SPI2_SS 0x68 0x002 +#define MX1_PAD_PS__PS 0x69 0x004 +#define MX1_PAD_PS__UART2_RI 0x69 0x005 +#define MX1_PAD_PS__GPIO4_9 0x69 0x032 +#define MX1_PAD_PS__SPI2_RXD 0x69 0x022 +#define MX1_PAD_SPL_SPR__SPL_SPR 0x6a 0x004 +#define MX1_PAD_SPL_SPR__UART2_DSR 0x6a 0x005 +#define MX1_PAD_SPL_SPR__GPIO4_10 0x6a 0x032 +#define MX1_PAD_SPL_SPR__SPI2_TXD 0x6a 0x006 +#define MX1_PAD_CONTRAST__CONTRAST 0x6b 0x004 +#define MX1_PAD_CONTRAST__GPIO4_11 0x6b 0x032 +#define MX1_PAD_CONTRAST__SPI2_SS2 0x6b 0x012 +#define MX1_PAD_ACD_OE__ACD_OE 0x6c 0x004 +#define MX1_PAD_ACD_OE__GPIO4_12 0x6c 0x032 +#define MX1_PAD_LP_HSYNC__LP_HSYNC 0x6d 0x004 +#define MX1_PAD_LP_HSYNC__GPIO4_13 0x6d 0x032 +#define MX1_PAD_FLM_VSYNC__FLM_VSYNC 0x6e 0x004 +#define MX1_PAD_FLM_VSYNC__GPIO4_14 0x6e 0x032 +#define MX1_PAD_LD0__LD0 0x6f 0x004 +#define MX1_PAD_LD0__GPIO4_15 0x6f 0x032 +#define MX1_PAD_LD1__LD1 0x70 0x004 +#define MX1_PAD_LD1__GPIO4_16 0x70 0x032 +#define MX1_PAD_LD2__LD2 0x71 0x004 +#define MX1_PAD_LD2__GPIO4_17 0x71 0x032 +#define MX1_PAD_LD3__LD3 0x72 0x004 +#define MX1_PAD_LD3__GPIO4_18 0x72 0x032 +#define MX1_PAD_LD4__LD4 0x73 0x004 +#define MX1_PAD_LD4__GPIO4_19 0x73 0x032 +#define MX1_PAD_LD5__LD5 0x74 0x004 +#define MX1_PAD_LD5__GPIO4_20 0x74 0x032 +#define MX1_PAD_LD6__LD6 0x75 0x004 +#define MX1_PAD_LD6__GPIO4_21 0x75 0x032 +#define MX1_PAD_LD7__LD7 0x76 0x004 +#define MX1_PAD_LD7__GPIO4_22 0x76 0x032 +#define MX1_PAD_LD8__LD8 0x77 0x004 +#define MX1_PAD_LD8__GPIO4_23 0x77 0x032 +#define MX1_PAD_LD9__LD9 0x78 0x004 +#define MX1_PAD_LD9__GPIO4_24 0x78 0x032 +#define MX1_PAD_LD10__LD10 0x79 0x004 +#define MX1_PAD_LD10__GPIO4_25 0x79 0x032 +#define MX1_PAD_LD11__LD11 0x7a 0x004 +#define MX1_PAD_LD11__GPIO4_26 0x7a 0x032 +#define MX1_PAD_LD12__LD12 0x7b 0x004 +#define MX1_PAD_LD12__GPIO4_27 0x7b 0x032 +#define MX1_PAD_LD13__LD13 0x7c 0x004 +#define MX1_PAD_LD13__GPIO4_28 0x7c 0x032 +#define MX1_PAD_LD14__LD14 0x7d 0x004 +#define MX1_PAD_LD14__GPIO4_29 0x7d 0x032 +#define MX1_PAD_LD15__LD15 0x7e 0x004 +#define MX1_PAD_LD15__GPIO4_30 0x7e 0x032 +#define MX1_PAD_TMR2OUT__TMR2OUT 0x7f 0x000 +#define MX1_PAD_TMR2OUT__GPIO4_31 0x7f 0x032 +#define MX1_PAD_TMR2OUT__SPI2_TXD 0x7f 0x006 + +#endif
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi new file mode 100644 index 0000000..22f5d1d --- /dev/null +++ b/arch/arm/boot/dts/imx1.dtsi
@@ -0,0 +1,266 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "skeleton.dtsi" +#include "imx1-pinfunc.h" + +#include <dt-bindings/clock/imx1-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + i2c0 = &i2c; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + spi0 = &cspi1; + spi1 = &cspi2; + }; + + aitc: aitc-interrupt-controller@00223000 { + compatible = "fsl,imx1-aitc", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x00223000 0x1000>; + }; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu: cpu@0 { + device_type = "cpu"; + compatible = "arm,arm920t"; + operating-points = <200000 1900000>; + clock-latency = <62500>; + clocks = <&clks IMX1_CLK_MCU>; + voltage-tolerance = <5>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&aitc>; + ranges; + + aipi@00200000 { + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00200000 0x10000>; + ranges; + + gpt1: timer@00202000 { + compatible = "fsl,imx1-gpt"; + reg = <0x00202000 0x1000>; + interrupts = <59>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@00203000 { + compatible = "fsl,imx1-gpt"; + reg = <0x00203000 0x1000>; + interrupts = <58>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + fb: fb@00205000 { + compatible = "fsl,imx1-fb"; + reg = <0x00205000 0x1000>; + interrupts = <14>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER2>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + uart1: serial@00206000 { + compatible = "fsl,imx1-uart"; + reg = <0x00206000 0x1000>; + interrupts = <30 29 26>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@00207000 { + compatible = "fsl,imx1-uart"; + reg = <0x00207000 0x1000>; + interrupts = <24 23 20>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + pwm: pwm@00208000 { + #pwm-cells = <2>; + compatible = "fsl,imx1-pwm"; + reg = <0x00208000 0x1000>; + interrupts = <34>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + dma: dma@00209000 { + compatible = "fsl,imx1-dma"; + reg = <0x00209000 0x1000>; + interrupts = <61 60>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_DMA_GATE>; + clock-names = "ipg", "ahb"; + #dma-cells = <1>; + }; + + uart3: serial@0020a000 { + compatible = "fsl,imx1-uart"; + reg = <0x0020a000 0x1000>; + interrupts = <54 4 1>; + clocks = <&clks IMX1_CLK_UART3_GATE>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + aipi@00210000 { + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00210000 0x10000>; + ranges; + + cspi1: cspi@00213000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-cspi"; + reg = <0x00213000 0x1000>; + interrupts = <41>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c: i2c@00217000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-i2c"; + reg = <0x00217000 0x1000>; + interrupts = <39>; + clocks = <&clks IMX1_CLK_HCLK>; + status = "disabled"; + }; + + cspi2: cspi@00219000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-cspi"; + reg = <0x00219000 0x1000>; + interrupts = <40>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + clks: ccm@0021b000 { + compatible = "fsl,imx1-ccm"; + reg = <0x0021b000 0x1000>; + #clock-cells = <1>; + }; + + iomuxc: iomuxc@0021c000 { + compatible = "fsl,imx1-iomuxc"; + reg = <0x0021c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@0021c000 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c000 0x100>; + interrupts = <11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@0021c100 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c100 0x100>; + interrupts = <12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@0021c200 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c200 0x100>; + interrupts = <13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@0021c300 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c300 0x100>; + interrupts = <62>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + + weim: weim@00220000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx1-weim"; + reg = <0x00220000 0x1000>; + clocks = <&clks IMX1_CLK_DUMMY>; + ranges = < + 0 0 0x10000000 0x02000000 + 1 0 0x12000000 0x01000000 + 2 0 0x13000000 0x01000000 + 3 0 0x14000000 0x01000000 + 4 0 0x15000000 0x01000000 + 5 0 0x16000000 0x01000000 + >; + status = "disabled"; + }; + + esram: esram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x20000>; + }; + }; +};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index a33f66c..57e2997 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -60,10 +60,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; lcd-supply = <®_lcd_3v3>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 9238a95..88eebb1 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -247,6 +247,7 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 #define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 +#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000 #define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000 #define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001 @@ -260,6 +261,7 @@ #define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000 #define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 #define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 @@ -269,31 +271,46 @@ #define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 +#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x001 #define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 #define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 +#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x12 0x001 #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 +#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x001 #define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 +#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000 #define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 +#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x001 #define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 +#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000 #define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 +#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x001 +#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001 #define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 +#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x001 +#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001 #define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 +#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x001 +#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001 #define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 +#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x001 +#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 #define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000 @@ -303,18 +320,24 @@ #define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x000 0x12 0x000 #define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x12 0x000 #define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x11 0x001 +#define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000 #define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000 @@ -328,6 +351,7 @@ #define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000 #define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001 +#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x12 0x000 #define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000 #define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000 @@ -342,6 +366,7 @@ #define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000 #define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002 +#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 #define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002 @@ -349,14 +374,17 @@ #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 +#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x11 0x001 #define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002 #define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000 #define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000 +#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x11 0x001 #define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002 #define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000 +#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x11 0x001 #define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000 @@ -457,14 +485,15 @@ #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 #define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 -#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 #define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 -#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 +#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002 +#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000 #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 #define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 +#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000 #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 #define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index c174039..58d3c3c 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi
@@ -239,6 +239,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <11>; @@ -274,6 +275,7 @@ }; ssi1: ssi@50034000 { + #sound-dai-cells = <0>; compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50034000 0x4000>; interrupts = <12>; @@ -453,7 +455,7 @@ }; sdma: sdma@53fd4000 { - compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; + compatible = "fsl,imx25-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>; clock-names = "ipg", "ahb";
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 2b6d489..da306c5 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -67,6 +67,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; status = "okay"; + + adc@0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max1027>; + spi-max-frequency = <10000000>; + }; }; &cspi2 { @@ -189,6 +199,13 @@ >; }; + pinctrl_max1027: max1027 { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */ + MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */ + >; + }; + pinctrl_pwm: pwmgrp { fsl,pins = < MX27_PAD_PWMO__PWMO 0x0
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 221cac4..1f38a05 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -83,10 +83,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_16bit_pins_a &lcdif_pins_apf28dev>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <16>;
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index e1ce917..1092b76 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -94,10 +94,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_apx4>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 7d51459..ef944b6 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -177,10 +177,10 @@ pinctrl-0 = <&lcdif_18bit_pins_cfa10049 &lcdif_pins_cfa10049 &lcdif_pins_cfa10049_pullup>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>;
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index c3900e7..6a34114 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -92,10 +92,10 @@ pinctrl-0 = <&lcdif_18bit_pins_cfa10055 &lcdif_pins_cfa10055 &lcdif_pins_cfa10055_pullup>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>;
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index cef959a..ba6495c 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -64,10 +64,10 @@ pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_cfa10056 &lcdif_pins_cfa10056_pullup >; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>;
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index c4e00ce..5df0b24 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -78,10 +78,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10057 &lcdif_pins_cfa10057>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>;
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 7c9cc78..f5c6dce 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -51,10 +51,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_cfa10058>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index e4cc44c..0e13b4b 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -124,10 +124,10 @@ pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; lcd-supply = <®_lcd_3v3>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; @@ -193,7 +193,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a {
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 9348ce5..2df63be 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -115,10 +115,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display0 { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>;
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index b3c09ae..e35cc6b 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -81,10 +81,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index e14bd86..a5b27c8 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -21,12 +21,15 @@ aliases { can0 = &can0; can1 = &can1; - display = &display; + display = &display0; ds1339 = &ds1339; gpio5 = &gpio5; lcdif = &lcdif; lcdif_23bit_pins = &tx28_lcdif_23bit_pins; lcdif_24bit_pins = &lcdif_24bit_pins_a; + reg_can_xcvr = ®_can_xcvr; + spi_gpio = &spi_gpio; + spi_mxs = &ssp3; stk5led = &user_led; usbotg = &usb0; }; @@ -37,7 +40,7 @@ onewire { compatible = "w1-gpio"; - gpios = <&gpio2 7 0>; + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -52,7 +55,7 @@ regulator-name = "usb0_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio0 18 0>; + gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -62,7 +65,7 @@ regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 27 0>; + gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -90,7 +93,7 @@ regulator-name = "CAN XCVR"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 0 0>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&tx28_flexcan_xcvr_pins>; }; @@ -101,7 +104,7 @@ regulator-name = "LCD POWER"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 31 0>; + gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -111,7 +114,7 @@ regulator-name = "LCD RESET"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 30 0>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; startup-delay-us = <300000>; enable-active-high; regulator-always-on; @@ -143,7 +146,7 @@ user_led: user { label = "Heartbeat"; - gpios = <&gpio4 10 0>; + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -172,16 +175,16 @@ matrix_keypad: matrix-keypad@0 { compatible = "gpio-matrix-keypad"; col-gpios = < - &gpio5 0 0 - &gpio5 1 0 - &gpio5 2 0 - &gpio5 3 0 + &gpio5 0 GPIO_ACTIVE_HIGH + &gpio5 1 GPIO_ACTIVE_HIGH + &gpio5 2 GPIO_ACTIVE_HIGH + &gpio5 3 GPIO_ACTIVE_HIGH >; row-gpios = < - &gpio5 4 0 - &gpio5 5 0 - &gpio5 6 0 - &gpio5 7 0 + &gpio5 4 GPIO_ACTIVE_HIGH + &gpio5 5 GPIO_ACTIVE_HIGH + &gpio5 6 GPIO_ACTIVE_HIGH + &gpio5 7 GPIO_ACTIVE_HIGH >; /* sample keymap */ linux,keymap = < @@ -203,6 +206,44 @@ col-scan-delay-us = <5000>; linux,no-autorepeat; }; + + spi_gpio: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_spi_gpio_pins>; + + gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>; + num-chipselects = <3>; + cs-gpios = < + &gpio2 27 GPIO_ACTIVE_LOW + &gpio3 8 GPIO_ACTIVE_LOW + &gpio3 9 GPIO_ACTIVE_LOW + >; + /* enable this and disable ssp3 below, if you need full duplex SPI transfer */ + status = "disabled"; + + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <57600000>; + }; + + spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <57600000>; + }; + + spi@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <57600000>; + }; + }; }; /* 2nd TX-Std UART - (A)UART1 */ @@ -284,8 +325,8 @@ pinctrl-0 = <&tx28_edt_ft5x06_pins>; interrupt-parent = <&gpio2>; interrupts = <5 0>; - reset-gpios = <&gpio2 6 1>; - wake-gpios = <&gpio4 9 0>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; }; touchscreen: tsc2007@48 { @@ -295,7 +336,7 @@ pinctrl-0 = <&tx28_tsc2007_pins>; interrupt-parent = <&gpio3>; interrupts = <20 0>; - pendown-gpio = <&gpio3 20 1>; + pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = /bits/ 16 <660>; }; @@ -309,10 +350,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>; lcd-supply = <®_lcd>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display@0 { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; display-timings { @@ -558,6 +599,20 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + tx28_spi_gpio_pins: spi-gpiogrp { + fsl,pinmux-ids = < + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 + MX28_PAD_SSP3_SCK__GPIO_2_24 + MX28_PAD_SSP3_MOSI__GPIO_2_25 + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SS0__GPIO_2_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + tx28_tsc2007_pins: tx28-tsc2007-pins { fsl,pinmux-ids = < MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */ @@ -619,17 +674,23 @@ clock-frequency = <57600000>; status = "okay"; - spidev0: spi@0 { + spi@0 { compatible = "spidev"; reg = <0>; spi-max-frequency = <57600000>; }; - spidev1: spi@1 { + spi@1 { compatible = "spidev"; reg = <1>; spi-max-frequency = <57600000>; }; + + spi@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <57600000>; + }; }; &usb0 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a95cc53..47f68ac 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi
@@ -489,6 +489,38 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc1_4bit_pins_a: mmc1-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__SSP1_D0 + MX28_PAD_GPMI_D01__SSP1_D1 + MX28_PAD_GPMI_D02__SSP1_D2 + MX28_PAD_GPMI_D03__SSP1_D3 + MX28_PAD_GPMI_RDY1__SSP1_CMD + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT + MX28_PAD_GPMI_WRN__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc1_cd_cfg: mmc1-cd-cfg { + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc1_sck_cfg: mmc1-sck-cfg { + fsl,pinmux-ids = < + MX28_PAD_GPMI_WRN__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -553,6 +585,17 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; + i2c1_pins_b: i2c1@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_AUART2_CTS__I2C1_SCL + MX28_PAD_AUART2_RTS__I2C1_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 442e216..6932928 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi
@@ -114,6 +114,7 @@ }; ssi1: ssi@43fa0000 { + #sound-dai-cells = <0>; compatible = "fsl,imx35-ssi", "fsl,imx21-ssi"; reg = <0x43fa0000 0x4000>; interrupts = <11>;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index c0e0f60..620b0f0 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi
@@ -145,6 +145,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx50-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; @@ -454,6 +455,7 @@ }; ssi1: ssi@63fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx50-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 17c05a6..92660e1 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi
@@ -210,6 +210,7 @@ }; ssi2: ssi@70014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x70014000 0x4000>; interrupts = <30>; @@ -499,6 +500,7 @@ }; ssi1: ssi@83fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fcc000 0x4000>; interrupts = <29>; @@ -554,6 +556,7 @@ }; ssi3: ssi@83fe8000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; interrupts = <96>;
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 5ec1590..1d32557 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -265,7 +265,7 @@ }; pmic: dialog@48 { - compatible = "dialog,da9053", "dialog,da9052"; + compatible = "dlg,da9053", "dlg,da9052"; reg = <0x48>; }; };
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index c6c58c1..f91725b 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi
@@ -221,6 +221,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; @@ -423,10 +424,14 @@ status = "disabled"; lvds-channel@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; status = "disabled"; - port { + port@0 { + reg = <0>; + lvds0_in: endpoint { remote-endpoint = <&ipu_di0_lvds0>; }; @@ -434,10 +439,14 @@ }; lvds-channel@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; status = "disabled"; - port { + port@1 { + reg = <1>; + lvds1_in: endpoint { remote-endpoint = <&ipu_di1_lvds1>; }; @@ -661,6 +670,7 @@ }; ssi1: ssi@63fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; @@ -688,6 +698,7 @@ }; ssi3: ssi@63fe8000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; @@ -744,5 +755,10 @@ reg = <0xf8000000 0x20000>; clocks = <&clks IMX5_CLK_OCRAM>; }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <77>; + }; }; };
diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/imx6dl-gw552x.dts new file mode 100644 index 0000000..a4b700c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw552x.dts
@@ -0,0 +1,20 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-gw552x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X"; + compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl"; +};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 7159854..44a0e67 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -1,206 +1,13 @@ /* - * Copyright (C) 2013,2014 Russell King + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King */ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" +#include "imx6qdl-hummingboard.dtsi" / { - model = "SolidRun HummingBoard DL/Solo"; - compatible = "solidrun,hummingboard", "fsl,imx6dl"; - - chosen { - stdout-path = &uart1; - }; - - ir_recv: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio1 2 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>; - }; - - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - }; - - sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "On-board SPDIF"; - /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; - status = "okay"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_hdmi>; - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - - /* - * Not fitted on Carrier-1 board... yet - status = "okay"; - - rtc: pcf8523@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - }; - */ -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c2>; - status = "okay"; -}; - -&iomuxc { - hummingboard { - pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 - >; - }; - - pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 - >; - }; - - pinctrl_hummingboard_hdmi: hummingboard-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_hummingboard_i2c1: hummingboard-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_i2c2: hummingboard-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; - - pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; - }; - - pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; - - pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; - }; - - pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - >; - }; - - pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; - }; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - vbus-supply = <®_usbh1_vbus>; - status = "okay"; -}; - -&usbotg { - disable-over-current; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; - vbus-supply = <®_usbotg_vbus>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = < - &pinctrl_hummingboard_usdhc2_aux - &pinctrl_hummingboard_usdhc2 - >; - vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; - status = "okay"; + model = "SolidRun HummingBoard Solo/DualLite"; + compatible = "solidrun,hummingboard/dl", "fsl,imx6dl"; };
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 22e6f8e..822ffb2 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -18,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet0 = &fec; ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; @@ -26,12 +26,10 @@ led0 = &led0; led1 = &led1; led2 = &led2; - sky2 = ð1; ssi0 = &ssi1; spi0 = &ecspi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -40,23 +38,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */ + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */ default-state = "off"; }; }; @@ -67,7 +67,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -109,7 +111,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -137,7 +139,7 @@ &ecspi1 { fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -153,7 +155,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -199,11 +201,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -314,16 +311,6 @@ }; }; }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; }; &i2c3 { @@ -345,148 +332,12 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - imx6q-gw5400-a { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; }; @@ -495,7 +346,7 @@ }; &pcie { - reset-gpio = <&gpio1 29 0>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; eth1: sky2@8 { /* MAC/PHY on bus 8 */ @@ -541,7 +392,133 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; + +&iomuxc { + imx6q-gw5400-a { + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; +};
diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/imx6q-gw552x.dts new file mode 100644 index 0000000..f87a8fa --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw552x.dts
@@ -0,0 +1,24 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-gw552x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW552X"; + compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts new file mode 100644 index 0000000..c2bf847 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts
@@ -0,0 +1,21 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Dual/Quad"; + compatible = "solidrun,hummingboard/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <9>; + fsl,receive-eq-mdB = <3000>; +};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 0db15af..f2867c4 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -9,11 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; led0 = &led0; led1 = &led1; nand = &gpmi; @@ -27,17 +27,19 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; }; @@ -48,7 +50,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -81,7 +85,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -91,7 +95,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -143,11 +147,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -159,53 +158,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -213,31 +165,53 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; +}; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - imx6qdl-gw51xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - >; - }; - pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -256,6 +230,14 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 >; }; @@ -301,6 +283,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -332,48 +326,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; }; }; - -&pcie { - reset-gpio = <&gpio1 0 0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 234e7b7..d3c0bf5 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -9,10 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet0 = &fec; led0 = &led0; led1 = &led1; led2 = &led2; @@ -20,7 +21,6 @@ ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -36,23 +36,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -63,7 +65,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -115,7 +119,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -141,11 +145,17 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -197,11 +207,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -213,65 +218,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -280,11 +226,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x13>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -297,49 +238,101 @@ compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; }; -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; +&ldb { + status = "okay"; - imx6qdl-gw52xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ - >; + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; }; + }; +}; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw52xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -361,6 +354,23 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -406,6 +416,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -436,6 +458,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; @@ -447,85 +470,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 143f84f..cade1bd 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -9,21 +9,19 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; nand = &gpmi; - sky2 = ð1; ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -39,23 +37,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -66,7 +66,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -118,7 +120,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -154,7 +156,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -206,11 +208,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -222,77 +219,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pciclkgen: si53156@6b { - compatible = "sil,si53156"; - reg = <0x6b>; - }; - - pciswitch: pex8606@3f { - compatible = "plx,pex8606"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - /* VDD_SOC */ - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_1P8 */ - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_ARM */ - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_DDR */ - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_2P5 */ - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_1P8 */ - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_HIGH */ - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -301,11 +227,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -314,65 +235,110 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; - interrupts = <11 2>; /* gpio1_11 active low */ - wakeup-gpios = <&gpio1 11 0>; - }; - - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + interrupts = <11 2>; + wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; +&ldb { + status = "okay"; - imx6qdl-gw53xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */ - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */ - >; + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; }; + }; +}; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw53xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -399,8 +365,17 @@ pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -446,6 +421,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -476,6 +464,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ >; }; @@ -487,90 +477,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 16e7ad3..cf13239 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -9,21 +9,19 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; nand = &gpmi; - sky2 = ð1; ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -39,23 +37,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -66,7 +66,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -108,7 +110,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -144,7 +146,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -196,11 +198,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -311,16 +308,6 @@ }; }; }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; }; &i2c3 { @@ -329,11 +316,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -342,59 +324,115 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; }; -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; +&ldb { + status = "okay"; - imx6qdl-gw54xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; }; + }; +}; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw54xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -421,8 +459,17 @@ pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -468,6 +515,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -498,6 +558,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ >; }; @@ -513,90 +574,3 @@ }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&ssi2 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi new file mode 100644 index 0000000..5c6587f --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -0,0 +1,267 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + nand = &gpmi; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + bootargs = "console=ttymxc1,115200"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p0v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; }; + +&usbh1 { + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw552x { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + }; +};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi new file mode 100644 index 0000000..62841e8 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -0,0 +1,200 @@ +/* + * Copyright (C) 2013,2014 Russell King + */ +#include "imx6qdl-microsom.dtsi" +#include "imx6qdl-microsom-ar8035.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 5 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "On-board SPDIF"; + /* IMX6 doesn't implement this yet */ + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c1>; + + /* + * Not fitted on Carrier-1 board... yet + status = "okay"; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + */ +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c2>; + status = "okay"; +}; + +&iomuxc { + hummingboard { + pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 + >; + }; + + pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 { + fsl,pins = < + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 + >; + }; + + pinctrl_hummingboard_hdmi: hummingboard-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_i2c2: hummingboard-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_spdif: hummingboard-spdif { + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; + }; + + pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; + + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; + + pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + >; + }; + + pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + }; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_hummingboard_usdhc2_aux + &pinctrl_hummingboard_usdhc2 + >; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 4 0>; + status = "okay"; +};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 42ff525..0821812 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -174,6 +174,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -187,6 +192,25 @@ VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; + + rtc: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; }; &iomuxc { @@ -266,6 +290,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 2694aa8..0e50bb0 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -83,7 +83,7 @@ }; pmic@58 { - compatible = "dialog,da9063"; + compatible = "dlg,da9063"; reg = <0x58>; interrupt-parent = <&gpio4>; interrupts = <17 0x8>; /* active-low GPIO4_17 */
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index ec43dde..baf2f00 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -54,6 +54,19 @@ gpio = <&gpio4 10 0>; enable-active-high; }; + + reg_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 0>; + regulator-always-on; + enable-active-high; + }; }; gpio-keys { @@ -314,15 +327,15 @@ imx6qdl-sabresd { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 >; }; @@ -367,9 +380,9 @@ pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 >; }; @@ -396,7 +409,13 @@ pinctrl_pcie: pciegrp { fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 >; }; @@ -468,7 +487,7 @@ gpio_leds { pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 >; }; };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index c701af9..9596ed5 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -137,7 +137,9 @@ pcie: pcie@0x01000000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; - reg = <0x01ffc000 0x4000>; /* DBI */ + reg = <0x01ffc000 0x04000>, + <0x01f00000 0x80000>; + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -273,11 +275,14 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI1_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI1_IPG>, + <&clks IMX6QDL_CLK_SSI1>; + clock-names = "ipg", "baud"; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; @@ -286,11 +291,14 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI2_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI2_IPG>, + <&clks IMX6QDL_CLK_SSI2>; + clock-names = "ipg", "baud"; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; @@ -299,11 +307,14 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI3_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI3_IPG>, + <&clks IMX6QDL_CLK_SSI3>; + clock-names = "ipg", "baud"; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; @@ -396,8 +407,9 @@ reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_GPT_IPG>, - <&clks IMX6QDL_CLK_GPT_IPG_PER>; - clock-names = "ipg", "per"; + <&clks IMX6QDL_CLK_GPT_IPG_PER>, + <&clks IMX6QDL_CLK_GPT_3M>; + clock-names = "ipg", "per", "osc_per"; }; gpio1: gpio@0209c000 {
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 3f9e041..898d14f 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -20,6 +20,13 @@ reg = <0x80000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -74,6 +81,14 @@ regulator-max-microvolt = <4325000>; regulator-boot-on; }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 0>; + enable-active-high; + }; }; sound { @@ -329,12 +344,6 @@ >; }; - pinctrl_led: ledgrp { - fsl,pins = < - MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 - >; - }; - pinctrl_kpp: kppgrp { fsl,pins = < MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 @@ -346,6 +355,51 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; + + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 @@ -488,6 +542,44 @@ status = "okay"; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &ssi2 { status = "okay"; };
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c75800c..dfd83e6 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -226,11 +226,14 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI1>; + clocks = <&clks IMX6SL_CLK_SSI1_IPG>, + <&clks IMX6SL_CLK_SSI1>; + clock-names = "ipg", "baud"; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; @@ -239,11 +242,14 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI2>; + clocks = <&clks IMX6SL_CLK_SSI2_IPG>, + <&clks IMX6SL_CLK_SSI2>; + clock-names = "ipg", "baud"; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; @@ -252,11 +258,14 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI3>; + clocks = <&clks IMX6SL_CLK_SSI3_IPG>, + <&clks IMX6SL_CLK_SSI3>; + clock-names = "ipg", "baud"; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; @@ -529,6 +538,14 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; + usbphy1: usbphy@020c9000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; @@ -627,8 +644,14 @@ }; lcdif: lcdif@020f8000 { + compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif"; reg = <0x020f8000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_LCDIF_PIX>, + <&clks IMX6SL_CLK_LCDIF_AXI>, + <&clks IMX6SL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; }; dcp: dcp@020fc000 { @@ -784,7 +807,7 @@ }; ocotp: ocotp@021bc000 { - compatible = "fsl,imx6sl-ocotp"; + compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; };
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index a3980d9..82d6b34 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -24,6 +24,13 @@ reg = <0x80000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -90,6 +97,14 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; }; sound { @@ -251,6 +266,44 @@ }; }; +&lcdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + &ssi2 { status = "okay"; }; @@ -365,6 +418,46 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp-1 { + fsl,pins = < + MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 + >; + }; + pinctrl_vcc_sd3: vccsd3grp { fsl,pins = < MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index f4b9da6..f3e88c0 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -298,6 +298,7 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -311,6 +312,7 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -324,6 +326,7 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -418,7 +421,7 @@ reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_GPT_BUS>, - <&clks IMX6SX_CLK_GPT_SERIAL>; + <&clks IMX6SX_CLK_GPT_3M>; clock-names = "ipg", "per"; }; @@ -776,6 +779,8 @@ <&clks IMX6SX_CLK_ENET_PTP>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; status = "disabled"; }; @@ -1062,6 +1067,7 @@ }; lcdif1: lcdif@02220000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02220000 0x4000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, @@ -1072,6 +1078,7 @@ }; lcdif2: lcdif@02224000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02224000 0x4000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi index 598afe9..4773d6a 100644 --- a/arch/arm/boot/dts/k2e-clocks.dtsi +++ b/arch/arm/boot/dts/k2e-clocks.dtsi
@@ -40,7 +40,7 @@ #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>; - clock-output-names = "usb"; + clock-output-names = "usb1"; reg = <0x02350004 0xb00>, <0x02350000 0x400>; reg-names = "control", "domain"; domain-id = <0>; @@ -60,8 +60,8 @@ #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; - clock-output-names = "pcie"; - reg = <0x0235006c 0xb00>, <0x02350000 0x400>; + clock-output-names = "pcie1"; + reg = <0x0235006c 0xb00>, <0x02350048 0x400>; reg-names = "control", "domain"; domain-id = <18>; };
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 03d0190..c358b4b 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi
@@ -67,6 +67,8 @@ clock-names = "usb"; interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>; ranges; + dma-coherent; + dma-ranges; status = "disabled"; dwc3@25010000 { @@ -76,5 +78,16 @@ usb-phy = <&usb1_phy>, <&usb1_phy>; }; }; + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; }; }; + +&mdio { + reg = <0x24200f00 0x100>; +};
diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi index c73899c..d721f4b 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/k2hk.dtsi
@@ -42,5 +42,61 @@ soc { /include/ "k2hk-clocks.dtsi" + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; + + dspgpio1: keystone_dsp_gpio@2620244 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x244>; + }; + + dspgpio2: keystone_dsp_gpio@2620248 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x248>; + }; + + dspgpio3: keystone_dsp_gpio@262024c { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x24c>; + }; + + dspgpio4: keystone_dsp_gpio@2620250 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x250>; + }; + + dspgpio5: keystone_dsp_gpio@2620254 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x254>; + }; + + dspgpio6: keystone_dsp_gpio@2620258 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x258>; + }; + + dspgpio7: keystone_dsp_gpio@262025c { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x25c>; + }; }; };
diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index 1f7f479..e32c3ba 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi
@@ -51,5 +51,51 @@ clocks = <&clkuart3>; interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; }; + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; + + dspgpio1: keystone_dsp_gpio@2620244 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x244>; + }; + + dspgpio2: keystone_dsp_gpio@2620248 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x248>; + }; + + dspgpio3: keystone_dsp_gpio@262024c { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x24c>; + }; }; }; + +&spi0 { + ti,davinci-spi-num-cs = <5>; +}; + +&spi1 { + ti,davinci-spi-num-cs = <3>; +}; + +&spi2 { + ti,davinci-spi-num-cs = <5>; + /* Pin muxed. Enabled and configured by Bootloader */ + status = "disabled"; +}; + +&mdio { + reg = <0x26200f00 0x100>; +};
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 9e31fe7..5d3e83f 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi
@@ -172,7 +172,7 @@ compatible = "ti,keystone-usbphy"; #address-cells = <1>; #size-cells = <1>; - reg = <0x2620738 32>; + reg = <0x2620738 24>; status = "disabled"; }; @@ -277,5 +277,13 @@ clock-names = "fck"; bus_freq = <2500000>; }; + + kirq0: keystone_irq@26202a0 { + compatible = "ti,keystone-irq"; + interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <1>; + ti,syscon-dev = <&devctrl 0x2a0>; + }; }; };
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 8f76d28..f82827d 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -123,11 +123,11 @@ dsa@0 { compatible = "marvell,dsa"; - #address-cells = <2>; + #address-cells = <1>; #size-cells = <0>; - dsa,ethernet = <ð0>; - dsa,mii-bus = <ðphy0>; + dsa,ethernet = <ð0port>; + dsa,mii-bus = <&mdio>; switch@0 { #address-cells = <1>; @@ -169,17 +169,13 @@ &mdio { status = "okay"; - - ethphy0: ethernet-phy@ff { - reg = <0xff>; /* No phy attached */ - speed = <1000>; - duplex = <1>; - }; }; ð0 { status = "okay"; + ethernet0-port@0 { - phy-handle = <ðphy0>; + speed = <1000>; + duplex = <1>; }; };
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts new file mode 100644 index 0000000..f2e08b3 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
@@ -0,0 +1,43 @@ +/* + * Marvell RD88F6181 A Board descrition + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions for the board with the A0 or + * higher stepping of the SoC. The ethernet switch does not have a + * "wan" port. + */ + +/dts-v1/; +#include "kirkwood-rd88f6281.dtsi" + +/ { + model = "Marvell RD88f6281 Reference design, with A0 or higher SoC"; + compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; + + dsa@0 { + switch@0 { + reg = <10 0>; /* MDIO address 10, switch 0 in tree */ + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@11 { + reg = <11>; + }; +}; + +ð1 { + status = "okay"; + + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts deleted file mode 100644 index a803bbb..0000000 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts +++ /dev/null
@@ -1,26 +0,0 @@ -/* - * Marvell RD88F6181 A0 Board descrition - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * This file contains the definitions for the board with the A0 variant of - * the SoC. The ethernet switch does not have a "wan" port. - */ - -/dts-v1/; -#include "kirkwood-rd88f6281.dtsi" - -/ { - model = "Marvell RD88f6281 Reference design, with A0 SoC"; - compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - - dsa@0 { - switch@0 { - reg = <10 0>; /* MDIO address 10, switch 0 in tree */ - }; - }; -}; \ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts deleted file mode 100644 index baeebbf..0000000 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts +++ /dev/null
@@ -1,31 +0,0 @@ -/* - * Marvell RD88F6181 A1 Board descrition - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * This file contains the definitions for the board with the A1 variant of - * the SoC. The ethernet switch has a "wan" port. - */ - -/dts-v1/; - -#include "kirkwood-rd88f6281.dtsi" - -/ { - model = "Marvell RD88f6281 Reference design, with A1 SoC"; - compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - - dsa@0 { - switch@0 { - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - port@4 { - reg = <4>; - label = "wan"; - }; - }; - }; -}; \ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts new file mode 100644 index 0000000..f4272b6 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -0,0 +1,35 @@ +/* + * Marvell RD88F6181 Z0 stepping descrition + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions for the board using the Z0 + * stepping of the SoC. The ethernet switch has a "wan" port. +*/ + +/dts-v1/; + +#include "kirkwood-rd88f6281.dtsi" + +/ { + model = "Marvell RD88f6281 Reference design, with Z0 SoC"; + compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; + + dsa@0 { + switch@0 { + reg = <0 0>; /* MDIO address 0, switch 0 in tree */ + port@4 { + reg = <4>; + label = "wan"; + }; + }; + }; +}; + +ð1 { + status = "disabled"; +};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index 26cf0e0..d195e88 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -37,7 +37,6 @@ ocp@f1000000 { pinctrl: pin-controller@10000 { - pinctrl-0 = <&pmx_sdio_cd>; pinctrl-names = "default"; pmx_sdio_cd: pmx-sdio-cd { @@ -69,8 +68,8 @@ #address-cells = <2>; #size-cells = <0>; - dsa,ethernet = <ð0>; - dsa,mii-bus = <ðphy1>; + dsa,ethernet = <ð0port>; + dsa,mii-bus = <&mdio>; switch@0 { #address-cells = <1>; @@ -119,35 +118,19 @@ }; partition@300000 { - label = "data"; + label = "rootfs"; reg = <0x0300000 0x500000>; }; }; &mdio { status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1: ethernet-phy@ff { - reg = <0xff>; /* No PHY attached */ - speed = <1000>; - duple = <1>; - }; }; ð0 { status = "okay"; ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; + speed = <1000>; + duplex = <1>; }; };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index afc640c..464f09a 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -309,7 +309,7 @@ marvell,tx-checksum-limit = <1600>; status = "disabled"; - ethernet0-port@0 { + eth0port: ethernet0-port@0 { compatible = "marvell,kirkwood-eth-port"; reg = <0>; interrupts = <11>; @@ -342,7 +342,7 @@ pinctrl-names = "default"; status = "disabled"; - ethernet1-port@0 { + eth1port: ethernet1-port@0 { compatible = "marvell,kirkwood-eth-port"; reg = <0>; interrupts = <15>;
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi new file mode 100644 index 0000000..e6539ea --- /dev/null +++ b/arch/arm/boot/dts/meson.dtsi
@@ -0,0 +1,110 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + gic: interrupt-controller@c4301000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xc4301000 0x1000>, + <0xc4300100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer@c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x14>; + interrupts = <0 10 1>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + wdt: watchdog@c1109900 { + compatible = "amlogic,meson6-wdt"; + reg = <0xc1109900 0x8>; + }; + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_A: serial@c81084c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81084c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_B: serial@c81084dc { + compatible = "amlogic,meson-uart"; + reg = <0xc81084dc 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_C: serial@c8108700 { + compatible = "amlogic,meson-uart"; + reg = <0xc8108700 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + }; +}; /* end of / */
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts new file mode 100644 index 0000000..dc2541f --- /dev/null +++ b/arch/arm/boot/dts/meson6-atv1200.dts
@@ -0,0 +1,66 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "meson6.dtsi" + +/ { + model = "Geniatech ATV1200"; + compatible = "geniatech,atv1200"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; +}; + +&uart_AO { + status = "okay"; +};
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi new file mode 100644 index 0000000..4ba4912 --- /dev/null +++ b/arch/arm/boot/dts/meson6.dtsi
@@ -0,0 +1,78 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "meson.dtsi" + +/ { + model = "Amlogic Meson6 SoC"; + compatible = "amlogic,meson6"; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x201>; + }; + }; + + clk81: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; +}; /* end of / */
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts index 443b446..0da0470 100644 --- a/arch/arm/boot/dts/mt6589-aquaris5.dts +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts
@@ -18,6 +18,11 @@ / { model = "bq Aquaris5"; + compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; + + chosen { + bootargs = "earlyprintk"; + }; memory { reg = <0x80000000 0x40000000>;
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index d0297a0..e3c7600 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -81,8 +81,8 @@ clock-names = "system-clk", "rtc-clk"; }; - gic: interrupt-controller@10212000 { - compatible = "arm,cortex-a15-gic"; + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; reg = <0x10211000 0x1000>,
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 8f8c07d..59d1c29 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi
@@ -75,7 +75,6 @@ compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; - ti,intc-size = <96>; reg = <0x480FE000 0x1000>; };
diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts index 21baec1..b604d26 100644 --- a/arch/arm/boot/dts/omap2420-n810.dts +++ b/arch/arm/boot/dts/omap2420-n810.dts
@@ -6,3 +6,10 @@ model = "Nokia N810"; compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2"; }; + +&i2c2 { + aic3x@18 { + compatible = "tlv320aic3x"; + reg = <0x18>; + }; +};
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index 89608b2..24c50db 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -27,6 +27,12 @@ &i2c1 { clock-frequency = <400000>; + + pmic@72 { + compatible = "menelaus"; + reg = <0x72>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + }; }; &i2c2 {
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 9be3c12..ae89aad 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -159,6 +159,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_iva: iva { + ti,mbox-tx = <2 1 3>; + ti,mbox-rx = <3 1 3>; + }; }; timer1: timer@48028000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 1a00f15..b56d7161 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -249,6 +249,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; }; timer1: timer@49018000 {
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1becefc..06a8aec 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -174,8 +174,8 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ >; };
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts deleted file mode 100644 index 021311f..0000000 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ /dev/null
@@ -1,311 +0,0 @@ -/* - * Copyright (C) 2013 Marek Belisko <marek@goldelico.com> - * - * Based on omap3-beagle-xm.dts - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/dts-v1/; - -#include "omap36xx.dtsi" - -/ { - model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3"; - - cpus { - cpu@0 { - cpu0-supply = <&vcc>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 MB */ - }; - - gpio-keys { - compatible = "gpio-keys"; - - aux-button { - label = "aux"; - linux,code = <169>; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - gpio-key,wakeup; - }; - }; - - sound { - compatible = "ti,omap-twl4030"; - ti,model = "gta04"; - - ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; - }; - - spi_lcd { - compatible = "spi-gpio"; - #address-cells = <0x1>; - #size-cells = <0x0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi_gpio_pins>; - - gpio-sck = <&gpio1 12 0>; - gpio-miso = <&gpio1 18 0>; - gpio-mosi = <&gpio1 20 0>; - cs-gpios = <&gpio1 19 0>; - num-chipselects = <1>; - - /* lcd panel */ - lcd: td028ttec1@0 { - compatible = "toppoly,td028ttec1"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - }; - }; -}; - -&omap3_pmx_core { - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ - 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ - >; - }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ - >; - }; - - mmc1_pins: pinmux_mmc1_pins { - pinctrl-single,pins = < - 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - >; - }; - - dss_dpi_pins: pinmux_dss_dpi_pins { - pinctrl-single,pins = < - 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ - 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ - 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ - 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ - 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ - 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ - >; - }; - - spi_gpio_pins: spi_gpio_pinmux { - pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */ - 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */ - 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */ - 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */ - >; - }; -}; - -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - }; - - twl_audio: audio { - compatible = "ti,twl4030-audio"; - codec { - }; - }; -}; - -#include "twl4030.dtsi" -#include "twl4030_omap3.dtsi" - -&i2c2 { - clock-frequency = <400000>; - - /* pressure sensor */ - bmp085@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - interrupt-parent = <&gpio4>; - interrupts = <17 IRQ_TYPE_EDGE_RISING>; - }; - - /* accelerometer */ - bma180@41 { - compatible = "bosch,bma180"; - reg = <0x41>; - interrupt-parent = <&gpio3>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; - }; - - /* leds */ - tca6507@45 { - compatible = "ti,tca6507"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x45>; - - gta04_led0: red_aux@0 { - label = "gta04:red:aux"; - reg = <0x0>; - }; - - gta04_led1: green_aux@1 { - label = "gta04:green:aux"; - reg = <0x1>; - }; - - gta04_led3: red_power@3 { - label = "gta04:red:power"; - reg = <0x3>; - linux,default-trigger = "default-on"; - }; - - gta04_led4: green_power@4 { - label = "gta04:green:power"; - reg = <0x4>; - }; - }; - - /* compass aka magnetometer */ - hmc5843@1e { - compatible = "honeywell,hmc5843"; - reg = <0x1e>; - }; - - /* touchscreen */ - tsc2007@48 { - compatible = "ti,tsc2007"; - reg = <0x48>; - interrupt-parent = <&gpio6>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; - ti,x-plate-ohms = <600>; - }; -}; - -&i2c3 { - clock-frequency = <100000>; -}; - -&usb_otg_hs { - interface-type = <0>; - usb-phy = <&usb2_phy>; - phys = <&usb2_phy>; - phy-names = "usb2-phy"; - mode = <3>; - power = <50>; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <&vmmc1>; - bus-width = <4>; - ti,non-removable; -}; - -&mmc2 { - vmmc-supply = <&vaux4>; - bus-width = <4>; - ti,non-removable; -}; - -&mmc3 { - status = "disabled"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; -}; - -&charger { - bb_uvolt = <3200000>; - bb_uamp = <150>; -}; - -&vaux4 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3150000>; -}; - -/* Needed to power the DPI pins */ -&vpll2 { - regulator-always-on; -}; - -&dss { - pinctrl-names = "default"; - pinctrl-0 = < &dss_dpi_pins >; - - status = "okay"; - - port { - dpi_out: endpoint { - remote-endpoint = <&lcd_in>; - data-lines = <24>; - }; - }; -};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi new file mode 100644 index 0000000..fd34f91 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -0,0 +1,451 @@ +/* + * Copyright (C) 2013 Marek Belisko <marek@goldelico.com> + * + * Based on omap3-beagle-xm.dts + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" + +/ { + model = "OMAP3 GTA04"; + compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + aliases { + display0 = &lcd; + }; + + gpio-keys { + compatible = "gpio-keys"; + + aux-button { + label = "aux"; + linux,code = <169>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + gpio-key,wakeup; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "gta04"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + + spi_lcd { + compatible = "spi-gpio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_pins>; + + gpio-sck = <&gpio1 12 0>; + gpio-miso = <&gpio1 18 0>; + gpio-mosi = <&gpio1 20 0>; + cs-gpios = <&gpio1 19 0>; + num-chipselects = <1>; + + /* lcd panel */ + lcd: td028ttec1@0 { + compatible = "toppoly,td028ttec1"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_pins + >; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + + spi_gpio_pins: spi_gpio_pinmux { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + clock-frequency = <400000>; + + /* pressure sensor */ + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + interrupt-parent = <&gpio4>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + }; + + /* accelerometer */ + bma180@41 { + compatible = "bosch,bma180"; + reg = <0x41>; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* leds */ + tca6507@45 { + compatible = "ti,tca6507"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x45>; + + gpio-controller; + #gpio-cells = <2>; + + gta04_led0: red_aux@0 { + label = "gta04:red:aux"; + reg = <0x0>; + }; + + gta04_led1: green_aux@1 { + label = "gta04:green:aux"; + reg = <0x1>; + }; + + gta04_led3: red_power@3 { + label = "gta04:red:power"; + reg = <0x3>; + linux,default-trigger = "default-on"; + }; + + gta04_led4: green_power@4 { + label = "gta04:green:power"; + reg = <0x4>; + }; + + wifi_reset: wifi_reset@6 { + reg = <0x6>; + compatible = "gpio"; + }; + }; + + /* compass aka magnetometer */ + hmc5843@1e { + compatible = "honeywell,hmc5883l"; + reg = <0x1e>; + }; + + /* touchscreen */ + tsc2007@48 { + compatible = "ti,tsc2007"; + reg = <0x48>; + interrupt-parent = <&gpio6>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; + ti,x-plate-ohms = <600>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + bus-width = <4>; + ti,non-removable; +}; + +&mmc2 { + vmmc-supply = <&vaux4>; + bus-width = <4>; + ti,non-removable; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&charger { + bb_uvolt = <3200000>; + bb_uamp = <150>; +}; + +/* spare */ +&vaux1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; +}; + +/* sensors */ +&vaux2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +/* camera */ +&vaux3 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; +}; + +/* WLAN/BT */ +&vaux4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; +}; + +/* GPS LNA */ +&vsim { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = < &dss_dpi_pins >; + + status = "okay"; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +};
diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts new file mode 100644 index 0000000..3099a89 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a3.dts
@@ -0,0 +1,48 @@ +/* + * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A3"; +}; + +&i2c2 { + + /* alternate accelerometer that might be installed on some GTA04A3 boards */ + lis302@1d { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x1d>; + interrupt-parent = <&gpio3>; + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + Vdd-supply = <&vaux2>; + Vdd_IO-supply = <&vaux2>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <8>; + st,click-thresh-y = <8>; + st,click-thresh-z = <10>; + st,click-click-time-limit = <9>; + st,click-latency = <50>; + st,irq1-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <32>; + st,min-limit-y = <3>; + st,min-limit-z = <3>; + st,max-limit-x = <3>; + st,max-limit-y = <32>; + st,max-limit-z = <32>; + }; +};
diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts new file mode 100644 index 0000000..c918bb1 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a4.dts
@@ -0,0 +1,13 @@ +/* + * Copyright (C) 2014 Marek Belisko <marek@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A4"; +};
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts new file mode 100644 index 0000000..52b386f --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -0,0 +1,17 @@ +/* + * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A5"; + + sound { + ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */ + }; +};
diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi new file mode 100644 index 0000000..bd66545 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha-common.dtsi
@@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-tao3530.dtsi" + +/ { + gpio_poweroff { + pinctrl-names = "default"; + pinctrl-0 = <&poweroff_pins>; + + compatible = "gpio-poweroff"; + gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; /* GPIO 168 */ + }; +}; + +&omap3_pmx_core { + sound2_pins: pinmux_sound2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */ + >; + }; + + led_blue_pins: pinmux_led_blue_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */ + >; + }; + + led_green_pins: pinmux_led_green_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */ + >; + }; + + led_red_pins: pinmux_led_red_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */ + >; + }; + + poweroff_pins: pinmux_poweroff_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */ + >; + }; + + powerdown_input_pins: pinmux_powerdown_input_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */ + >; + }; + + fpga_boot0_pins: fpga_boot0_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4) /* cam_d4 gpio_103 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */ + >; + }; + + fpga_boot1_pins: fpga_boot1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4) /* gpmc_d12 gpio_48 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */ + >; + }; +}; + +/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +};
diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts new file mode 100644 index 0000000..11aa28d --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts
@@ -0,0 +1,165 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-ha-common.dtsi" + +/ { + model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM"; + compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + &powerdown_input_pins + &fpga_boot0_pins + &fpga_boot1_pins + &led_blue_pins + &led_green_pins + &led_red_pins + &touchscreen_wake_pins + >; + + touchscreen_irq_pins: pinmux_touchscreen_irq_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio_136, Touchscreen IRQ */ + >; + }; + + touchscreen_wake_pins: pinmux_touchscreen_wake_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4) /* gpio_110, Touchscreen Wake */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; +}; + +/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <31250000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <86>; + hsync-len = <1>; + vback-porch = <30>; + vfront-porch = <13>; + vsync-len = <3>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */ + + default-on; + }; +};
diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts new file mode 100644 index 0000000..fde3256 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha.dts
@@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-ha-common.dtsi" + +/ { + model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM"; + compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + &powerdown_input_pins + &fpga_boot0_pins + &fpga_boot1_pins + &led_blue_pins + &led_green_pins + &led_red_pins + >; +};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index af272c1..72dca0b 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -159,6 +159,11 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_power: power { + compatible = "ti,twl4030-power-idle"; + ti,use_poweroff; + }; }; };
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4361777..bc82a12 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -134,24 +134,32 @@ >; }; + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */ + OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */ + >; + }; + i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x18a (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x18e (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - 0x190 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x192 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - 0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ >; }; @@ -578,6 +586,8 @@ &gpmc { ranges = <0 0 0x04000000 0x10000000>; /* 256MB */ + ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ + <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ /* gpio-irq for dma: 65 */ @@ -646,6 +656,43 @@ reg = <0x004c0000 0x0fb40000>; }; }; + + ethernet@gpmc { + compatible = "smsc,lan91c94"; + + status = "disabled"; + + interrupt-parent = <&gpio2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ + reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + bank-width = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */ + reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */ + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <48>; + gpmc,cs-wr-off-ns = <24>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <0>; + gpmc,adv-wr-off-ns = <0>; + gpmc,we-on-ns = <12>; + gpmc,we-off-ns = <18>; + gpmc,oe-on-ns = <12>; + gpmc,oe-off-ns = <48>; + gpmc,page-burst-access-ns = <0>; + gpmc,access-ns = <42>; + gpmc,rd-cycle-ns = <180>; + gpmc,wr-cycle-ns = <180>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <0>; + gpmc,wr-data-mux-bus-ns = <12>; + }; }; &mcspi1 {
diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi index 5831bcc..520453d 100644 --- a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
@@ -36,8 +36,8 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; }; @@ -88,6 +88,7 @@ }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; };
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi new file mode 100644 index 0000000..b30f387 --- /dev/null +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -0,0 +1,337 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap34xx-hs.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ + vcc-supply = <&hsusb2_power>; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + /* McBSP2 is used for onboard sound, same as on beagle */ + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + + /* Regulator to enable/switch the vcc of the Wifi module */ + mmc2_sdio_poweron: regulator-mmc2-sdio-poweron { + compatible = "regulator-fixed"; + regulator-name = "regulator-mmc2-sdio-poweron"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */ + enable-active-low; + startup-delay-us = <10000>; + }; +}; + +&omap3_pmx_core { + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + + /* wlan GPIO output for WLAN_EN */ + wlan_gpio: pinmux_wlan_gpio { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1) /* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1) /* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */ + OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */ + OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clk.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_fsx.uart2_rx */ + >; + }; +}; + +/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */ +&mcbsp1 { + status = "disabled"; +}; + +&mcbsp2 { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpha; + }; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpha; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + cd-gpios = <&twl_gpio 0 0>; + bus-width = <8>; +}; + +// WiFi (Marvell 88W8686) on MMC2/SDIO +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&mmc2_sdio_poweron>; + non-removable; + bus-width = <4>; + cap-power-off-card; +}; + +&mmc3 { + status = "disabled"; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&mcbsp3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x01000000>; + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ + ti,nand-ecc-opt = "sw"; + + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +};
diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts new file mode 100644 index 0000000..d659515 --- /dev/null +++ b/arch/arm/boot/dts/omap3-thunder.dts
@@ -0,0 +1,129 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-tao3530.dtsi" + +/ { + model = "TI OMAP3 Thunder baseboard with TAO3530 SOM"; + compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "samsung,lte430wq-f0c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <2>; + vfront-porch = <3>; + vsync-len = <11>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */ + + default-on; + }; +};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 575a49b..d0e884d 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi
@@ -97,6 +97,7 @@ prm: prm@48306000 { compatible = "ti,omap3-prm"; reg = <0x48306000 0x4000>; + interrupts = <11>; prm_clocks: clocks { #address-cells = <1>; @@ -140,10 +141,9 @@ }; intc: interrupt-controller@48200000 { - compatible = "ti,omap2-intc"; + compatible = "ti,omap3-intc"; interrupt-controller; #interrupt-cells = <1>; - ti,intc-size = <96>; reg = <0x48200000 0x1000>; }; @@ -334,6 +334,10 @@ interrupts = <26>; ti,mbox-num-users = <2>; ti,mbox-num-fifos = <2>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; }; mcspi1: spi@48098000 {
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 8cfa3c8..1505135 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -8,9 +8,6 @@ #include "elpida_ecb240abacn.dtsi" / { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; - memory { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 816d1c9..2f1dabc 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -10,6 +10,11 @@ #include "omap4460.dtsi" #include "omap4-panda-common.dtsi" +/ { + model = "TI OMAP4 PandaBoard-ES"; + compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { ti,model = "PandaBoardES";
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 6189a8b..a0e28b2 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -9,3 +9,8 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; +};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 69408b5..878c979 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi
@@ -81,6 +81,7 @@ mpu { compatible = "ti,omap4-mpu"; ti,hwmods = "mpu"; + sram = <&ocmcram>; }; dsp { @@ -129,6 +130,7 @@ prm: prm@4a306000 { compatible = "ti,omap4-prm"; reg = <0x4a306000 0x3000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; prm_clocks: clocks { #address-cells = <1>; @@ -208,6 +210,11 @@ }; }; + ocmcram: ocmcram@40304000 { + compatible = "mmio-sram"; + reg = <0x40304000 0xa000>; /* 40k */ + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -656,6 +663,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; }; timer1: timer@4a318000 {
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index b8698ca..b54b271 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -16,6 +16,12 @@ reg = <0x80000000 0x7F000000>; /* 2048 MB */ }; + aliases { + display0 = &hdmi0; + display1 = &dvi0; + display2 = &lcd0; + }; + vmmcsd_fixed: fixed-regulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -45,6 +51,13 @@ enable-active-high; }; + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; @@ -66,6 +79,105 @@ default-state = "off"; }; }; + + lcd0: display { + compatible = "startek,startek-kd050c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <43>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + }; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_conn_pins>; + + hpd-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_dvi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@1 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c2>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; +}; + +&omap5_pmx_wkup { + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + 0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */ + >; + }; }; &omap5_pmx_core { @@ -88,6 +200,13 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */ @@ -127,8 +246,8 @@ wlan_gpios_pins: pinmux_wlan_gpios_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */ - OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */ + OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */ + OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */ >; }; @@ -144,6 +263,104 @@ OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x013c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec */ + OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */ + OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */ + >; + }; + + lcd_pins: pinmux_lcd_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */ + >; + }; + + hdmi_conn_pins: pinmux_hdmi_conn_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */ + OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */ + OMAP5_IOPAD(0x0108, PIN_OUTPUT | MUX_MODE3) /* rfbi_data13.dispc_data13 */ + OMAP5_IOPAD(0x010a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data12.dispc_data12 */ + OMAP5_IOPAD(0x010c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data11.dispc_data11 */ + OMAP5_IOPAD(0x010e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data10.dispc_data10 */ + OMAP5_IOPAD(0x0110, PIN_OUTPUT | MUX_MODE3) /* rfbi_data9.dispc_data9 */ + OMAP5_IOPAD(0x0112, PIN_OUTPUT | MUX_MODE3) /* rfbi_data8.dispc_data8 */ + OMAP5_IOPAD(0x0114, PIN_OUTPUT | MUX_MODE3) /* rfbi_data7.dispc_data7 */ + OMAP5_IOPAD(0x0116, PIN_OUTPUT | MUX_MODE3) /* rfbi_data6.dispc_data6 */ + OMAP5_IOPAD(0x0118, PIN_OUTPUT | MUX_MODE3) /* rfbi_data5.dispc_data5 */ + OMAP5_IOPAD(0x011a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data4.dispc_data4 */ + OMAP5_IOPAD(0x011c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data3.dispc_data3 */ + OMAP5_IOPAD(0x011e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data2.dispc_data2 */ + OMAP5_IOPAD(0x0120, PIN_OUTPUT | MUX_MODE3) /* rfbi_data1.dispc_data1 */ + OMAP5_IOPAD(0x0122, PIN_OUTPUT | MUX_MODE3) /* rfbi_data0.dispc_data0 */ + OMAP5_IOPAD(0x0124, PIN_OUTPUT | MUX_MODE3) /* rfbi_we.dispc_vsync */ + OMAP5_IOPAD(0x0126, PIN_OUTPUT | MUX_MODE3) /* rfbi_cs0.dispc_hsync */ + OMAP5_IOPAD(0x0128, PIN_OUTPUT | MUX_MODE3) /* rfbi_a0.dispc_de */ + OMAP5_IOPAD(0x012a, PIN_OUTPUT | MUX_MODE3) /* rfbi_re.dispc_pclk */ + OMAP5_IOPAD(0x012c, PIN_OUTPUT | MUX_MODE3) /* rfbi_hsync0.dispc_data17 */ + OMAP5_IOPAD(0x012e, PIN_OUTPUT | MUX_MODE3) /* rfbi_te_vsync0.dispc_data16 */ + OMAP5_IOPAD(0x0130, PIN_OUTPUT | MUX_MODE3) /* gpio6_182.dispc_data18 */ + OMAP5_IOPAD(0x0132, PIN_OUTPUT | MUX_MODE3) /* gpio6_183.dispc_data19 */ + OMAP5_IOPAD(0x0134, PIN_OUTPUT | MUX_MODE3) /* gpio6_184.dispc_data20 */ + OMAP5_IOPAD(0x0136, PIN_OUTPUT | MUX_MODE3) /* gpio6_185.dispc_data21 */ + OMAP5_IOPAD(0x0138, PIN_OUTPUT | MUX_MODE3) /* gpio6_186.dispc_data22 */ + OMAP5_IOPAD(0x013a, PIN_OUTPUT | MUX_MODE3) /* gpio6_187.dispc_data23 */ + >; + }; + + mcspi2_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + OMAP5_IOPAD(0x0100, PIN_INPUT | MUX_MODE0) /* mcspi2_somi */ + OMAP5_IOPAD(0x0102, PIN_INPUT | MUX_MODE0) /* mcspi2_cs0 */ + >; + }; +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio1>; + interrupts = <15 0>; /* gpio1_wk15 */ + pendown-gpio = <&gpio1 15 0>; + + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + ti,debounce-max = /bits/ 16 <30>; + ti,debounce-tol = /bits/ 16 <10>; + ti,debounce-rep = /bits/ 16 <1>; + + linux,wakeup; + }; }; &mmc1 { @@ -353,13 +570,12 @@ }; ldo8_reg: ldo8 { - /* VDD_3v0: Does not go anywhere */ + /* VDD_3V_GP: act led/serial console */ regulator-name = "ldo8"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + regulator-always-on; regulator-boot-on; - /* Unused */ - status = "disabled"; }; ldo9_reg: ldo9 { @@ -399,6 +615,13 @@ }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; +}; + &usbhshost { port2-mode = "ehci-hsic"; port3-mode = "ehci-hsic"; @@ -408,6 +631,50 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_dvi_out: endpoint@0 { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + + dpi_lcd_out: endpoint@1 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&dsi2 { + status = "ok"; + vdd-supply = <&ldo4_reg>; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo4_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +};
diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts index aa98fea..337bbbc 100644 --- a/arch/arm/boot/dts/omap5-sbc-t54.dts +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts
@@ -1,11 +1,11 @@ /* - * Suppport for CompuLab SBC-T54 with CM-T54 + * Suppport for CompuLab CM-T54 on SB-T54 baseboard */ #include "omap5-cm-t54.dts" / { - model = "CompuLab SBC-T54 with CM-T54"; + model = "CompuLab CM-T54 on SB-T54"; compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; }; @@ -19,8 +19,8 @@ mmc1_aux_pins: pinmux_mmc1_aux_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */ - OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */ + OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */ + OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */ >; }; };
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index fc8df17..256b7f6 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi
@@ -104,8 +104,9 @@ soc { compatible = "ti,omap-infra"; mpu { - compatible = "ti,omap5-mpu"; + compatible = "ti,omap4-mpu"; ti,hwmods = "mpu"; + sram = <&ocmcram>; }; }; @@ -131,6 +132,7 @@ prm: prm@4ae06000 { compatible = "ti,omap5-prm"; reg = <0x4ae06000 0x3000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; prm_clocks: clocks { #address-cells = <1>; @@ -187,18 +189,22 @@ }; omap5_pmx_core: pinmux@4a002840 { - compatible = "ti,omap4-padconf", "pinctrl-single"; + compatible = "ti,omap5-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; omap5_pmx_wkup: pinmux@4ae0c840 { - compatible = "ti,omap4-padconf", "pinctrl-single"; + compatible = "ti,omap5-padconf", "pinctrl-single"; reg = <0x4ae0c840 0x0038>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; @@ -219,6 +225,11 @@ }; }; + ocmcram: ocmcram@40300000 { + compatible = "mmio-sram"; + reg = <0x40300000 0x20000>; /* 128k */ + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -447,7 +458,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -455,7 +466,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -463,7 +474,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -471,7 +482,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -479,7 +490,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; @@ -487,7 +498,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; @@ -642,6 +653,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; }; timer1: timer@4ae18000 { @@ -945,6 +964,15 @@ clock-names = "fck"; }; + rfbi: encoder@58002000 { + compatible = "ti,omap5-rfbi"; + reg = <0x58002000 0x100>; + status = "disabled"; + ti,hwmods = "dss_rfbi"; + clocks = <&dss_dss_clk>, <&l3_iclk_div>; + clock-names = "fck", "ick"; + }; + dsi1: encoder@58004000 { compatible = "ti,omap5-dsi"; reg = <0x58004000 0x200>,
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index a705469..80fc5d7 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -1,5 +1,6 @@ /* The pxa3xx skeleton simply augments the 2xx version */ -/include/ "pxa2xx.dtsi" +#include "pxa2xx.dtsi" +#include "dt-bindings/clock/pxa2xx-clock.h" / { model = "Marvell PXA27x familiy SoC"; @@ -35,4 +36,21 @@ #pwm-cells = <1>; }; }; + + clocks { + /* + * The muxing of external clocks/internal dividers for osc* clock + * sources has been hidden under the carpet by now. + */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pxa2xx_clks: pxa2xx_clks@41300004 { + compatible = "marvell,pxa-clocks"; + #clock-cells = <1>; + status = "okay"; + }; + }; + };
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index a5e90f0..c08f846 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -113,14 +113,14 @@ }; usb0: ohci@4c000000 { - compatible = "mrvl,pxa-ohci"; + compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; status = "disabled"; }; mmc0: mmc@41100000 { - compatible = "mrvl,pxa-mmc"; + compatible = "marvell,pxa-mmc"; reg = <0x41100000 0x1000>; interrupts = <23>; status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts new file mode 100644 index 0000000..5d75666 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,59 @@ +#include "qcom-apq8064-v2.0.dtsi" + +/ { + model = "CompuLab CM-QS600"; + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; + + soc { + pinctrl@800000 { + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@50 { + compatible = "24c02"; + reg = <0x50>; + pagesize = <32>; + }; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + /* WLAN */ + sdcc4: sdcc@121c0000 { + status = "okay"; + }; + }; + }; +};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 7c2441d..b396c83 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -5,6 +5,33 @@ compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; soc { + pinctrl@800000 { + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = <GSBI_PROT_I2C_UART>; @@ -12,5 +39,21 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + /* WLAN */ + sdcc4: sdcc@121c0000 { + status = "okay"; + }; + }; }; };
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 92bf793..b3154c0 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -2,7 +2,9 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm APQ8064"; @@ -70,6 +72,34 @@ ranges; compatible = "simple-bus"; + tlmm_pinmux: pinctrl@800000 { + compatible = "qcom,apq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&ps_hold>; + + sdc4_gpios: sdc4-gpios { + pios { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; + }; + }; + + ps_hold: ps_hold { + mux { + pins = "gpio78"; + function = "ps_hold"; + }; + }; + }; + intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -133,6 +163,48 @@ regulator; }; + gsbi1: gsbi@12440000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c1: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = <0 194 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi2: gsbi@12480000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c2: i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -166,5 +238,116 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + mmcc: clock-controller@4000000 { + compatible = "qcom,mmcc-apq8064"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <0 98 0>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <0 96 0>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc4bam:dma@121c2000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x121c2000 0x8000>; + interrupts = <0 95 0>; + clocks = <&gcc SDC4_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc4: sdcc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x2000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + vmmc-supply = <&vsdcc_fixed>; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc4_gpios>; + }; + }; }; };
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index b4dfb01..4737049 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -22,6 +22,13 @@ pinctrl@fd510000 { + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + }; + }; + spi8_default: spi8_default { mosi { pins = "gpio45"; @@ -41,5 +48,19 @@ }; }; }; + + i2c@f9967000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c11_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; + }; }; };
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts new file mode 100644 index 0000000..c9ff108 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -0,0 +1,23 @@ +#include "qcom-apq8084.dtsi" + +/ { + model = "Qualcomm APQ8084/IFC6540"; + compatible = "qcom,apq8084-ifc6540", "qcom,apq8084"; + + soc { + serial@f995e000 { + status = "okay"; + }; + + sdhci@f9824900 { + bus-width = <8>; + non-removable; + status = "okay"; + }; + + sdhci@f98a4900 { + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; + bus-width = <4>; + }; + }; +};
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index 9dae387..8ecec58 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -3,4 +3,10 @@ / { model = "Qualcomm APQ 8084-MTP"; compatible = "qcom,apq8084-mtp", "qcom,apq8084"; + + soc { + serial@f995e000 { + status = "okay"; + }; + }; };
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index e3e009a..1f130bc 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -2,6 +2,9 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-apq8084.h> +#include <dt-bindings/gpio/gpio.h> + / { model = "Qualcomm APQ 8084"; compatible = "qcom,apq8084"; @@ -175,5 +178,53 @@ compatible = "qcom,pshold"; reg = <0xfc4ab000 0x4>; }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-apq8084"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,apq8084-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + }; + + serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = <0 114 0x0>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; }; };
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts new file mode 100644 index 0000000..55b2910 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -0,0 +1,93 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm IPQ8064/AP148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + + i2c4: i2c@16380000 { + status = "ok"; + + clock-frequency = <200000>; + + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "rootfs"; + reg = <0x0 0x1000000>; + }; + + partition@1 { + label = "scratch"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; + }; +};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi new file mode 100644 index 0000000..7093b07 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1 @@ +#include "qcom-ipq8064.dtsi"
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi new file mode 100644 index 0000000..63b2146 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -0,0 +1,283 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-ipq806x.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + model = "Qualcomm IPQ8064"; + compatible = "qcom,ipq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nss@40000000 { + reg = <0x40000000 0x1000000>; + no-map; + }; + + smem@41000000 { + reg = <0x41000000 0x200000>; + no-map; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + qcom_pinmux: pinmux@800000 { + compatible = "qcom,ipq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 32 0x4>; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <25000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 0>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <0 152 0x0>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + status = "disabled"; + }; + + sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + interrupts = <0 209 0x0>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_face", "iface", "core", + "rxoob", "pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +};
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 45180ad..e0883c3 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -1,3 +1,5 @@ +#include <dt-bindings/input/input.h> + #include "qcom-msm8660.dtsi" / { @@ -12,5 +14,45 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; + }; +}; + +&pmicintc { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_FN_F1) + MATRIX_KEY(0, 1, KEY_UP) + MATRIX_KEY(0, 2, KEY_LEFT) + MATRIX_KEY(0, 3, KEY_VOLUMEUP) + MATRIX_KEY(1, 0, KEY_FN_F2) + MATRIX_KEY(1, 1, KEY_RIGHT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) + MATRIX_KEY(2, 3, KEY_ENTER) + MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) + MATRIX_KEY(4, 1, KEY_UP) + MATRIX_KEY(4, 2, KEY_LEFT) + MATRIX_KEY(4, 3, KEY_HOME) + MATRIX_KEY(4, 4, KEY_FN_F3) + MATRIX_KEY(5, 0, KEY_CAMERA) + MATRIX_KEY(5, 1, KEY_RIGHT) + MATRIX_KEY(5, 2, KEY_DOWN) + MATRIX_KEY(5, 3, KEY_BACK) + MATRIX_KEY(5, 4, KEY_MENU) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; }; };
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 53837aaa2f..0affd61 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -103,6 +104,98 @@ compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8058"; + interrupt-parent = <&msmgpio>; + interrupts = <88 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8058-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; + + keypad@148 { + compatible = "qcom,pm8058-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + rtc@11d { + compatible = "qcom,pm8058-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + }; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; }; }; + };
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 8f75cc4..7f70fae 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -1,3 +1,5 @@ +#include <dt-bindings/input/input.h> + #include "qcom-msm8960.dtsi" / { @@ -12,5 +14,30 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; + }; +}; + +&pmicintc { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; }; };
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 5303e53..e1b0d5c 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -143,6 +144,43 @@ compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8921"; + interrupt-parent = <&msmgpio>; + interrupts = <104 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + }; }; rng@1a500000 { @@ -151,5 +189,54 @@ clocks = <&gcc PRNG_CLK>; clock-names = "core"; }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; + }; }; };
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts new file mode 100644 index 0000000..cccc21b --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -0,0 +1,17 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; + + memory@0 { + reg = <0 0x40000000>, <0x40000000 0x40000000>; + device_type = "memory"; + }; +}; + +&soc { + serial@f991e000 { + status = "ok"; + }; +};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 69dca2a..e265ec1 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,8 +1,8 @@ /dts-v1/; -#include "skeleton.dtsi" - +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include "skeleton.dtsi" / { model = "Qualcomm MSM8974"; @@ -236,5 +236,16 @@ #interrupt-cells = <2>; interrupts = <0 208 0>; }; + + blsp_i2c11: i2c@f9967000 { + status = "disable"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <0 105 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; }; };
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 2070546..a3ed23c 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -43,6 +43,10 @@ clock-frequency = <48000000>; }; +&mtu2 { + status = "ok"; +}; + &i2c2 { status = "okay"; clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index bdee225..801a556 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -229,6 +229,16 @@ status = "disabled"; }; + mtu2: timer@fcff0000 { + compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; + reg = <0xfcff0000 0x400>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tgi0a"; + clocks = <&mstp3_clks R7S72100_CLK_MTU2>; + clock-names = "fck"; + status = "disabled"; + }; + scif0: serial@e8007000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8007000 64>;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index d8ec505..ef152e3 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -51,7 +51,7 @@ }; irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a73a4", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; @@ -90,7 +90,7 @@ }; irqc1: interrupt-controller@e61c0200 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a73a4", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; @@ -165,7 +165,7 @@ }; thermal@e61f0000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts deleted file mode 100644 index ee9e7d5..0000000 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ /dev/null
@@ -1,283 +0,0 @@ -/* - * Reference Device Tree Source for the armadillo 800 eva board - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7740.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "armadillo 800 eva reference"; - compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740"; - - aliases { - serial1 = &scifa1; - }; - - chosen { - bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x20000000>; - }; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_sdhi0: regulator@1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pfc 75 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator@2 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sdhi0>; - - enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>; - gpios = <&pfc 17 GPIO_ACTIVE_HIGH>; - states = <3300000 0 - 1800000 1>; - - enable-active-high; - }; - - reg_5p0v: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "fixed-5.0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power-key { - gpios = <&pfc 99 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "SW3"; - gpio-key,wakeup; - }; - - back-key { - gpios = <&pfc 100 GPIO_ACTIVE_LOW>; - linux,code = <KEY_BACK>; - label = "SW4"; - }; - - menu-key { - gpios = <&pfc 97 GPIO_ACTIVE_LOW>; - linux,code = <KEY_MENU>; - label = "SW5"; - }; - - home-key { - gpios = <&pfc 98 GPIO_ACTIVE_LOW>; - linux,code = <KEY_HOME>; - label = "SW6"; - }; - }; - - leds { - compatible = "gpio-leds"; - led3 { - gpios = <&pfc 102 GPIO_ACTIVE_HIGH>; - label = "LED3"; - }; - led4 { - gpios = <&pfc 111 GPIO_ACTIVE_HIGH>; - label = "LED4"; - }; - led5 { - gpios = <&pfc 110 GPIO_ACTIVE_HIGH>; - label = "LED5"; - }; - led6 { - gpios = <&pfc 177 GPIO_ACTIVE_HIGH>; - label = "LED6"; - }; - }; - - i2c2: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "i2c-gpio"; - gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */ - &pfc 91 GPIO_ACTIVE_HIGH /* scl */ - >; - i2c-gpio,delay-us = <5>; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; - brightness-levels = <0 1 2 4 8 16 32 64 128 255>; - default-brightness-level = <9>; - pinctrl-0 = <&backlight_pins>; - pinctrl-names = "default"; - power-supply = <®_5p0v>; - enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>; - }; - - sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "i2s"; - - simple-audio-card,cpu { - sound-dai = <&sh_fsi2 0>; - bitclock-inversion; - }; - - simple-audio-card,codec { - sound-dai = <&wm8978>; - bitclock-master; - frame-master; - system-clock-frequency = <12288000>; - }; - }; -}; - -ðer { - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy0>; - status = "ok"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -&i2c0 { - status = "okay"; - touchscreen@55 { - compatible = "sitronix,st1232"; - reg = <0x55>; - interrupt-parent = <&irqpin1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&st1232_pins>; - pinctrl-names = "default"; - gpios = <&pfc 166 GPIO_ACTIVE_LOW>; - }; - - wm8978: wm8978@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8978"; - reg = <0x1a>; - }; -}; - -&i2c2 { - status = "okay"; - rtc@30 { - compatible = "sii,s35390a"; - reg = <0x30>; - }; -}; - -&pfc { - ether_pins: ether { - renesas,groups = "gether_mii", "gether_int"; - renesas,function = "gether"; - }; - - scifa1_pins: serial1 { - renesas,groups = "scifa1_data"; - renesas,function = "scifa1"; - }; - - st1232_pins: touchscreen { - renesas,groups = "intc_irq10"; - renesas,function = "intc"; - }; - - backlight_pins: backlight { - renesas,groups = "tpu0_to2_1"; - renesas,function = "tpu0"; - }; - - mmc0_pins: mmc0 { - renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1"; - renesas,function = "mmc0"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; - renesas,function = "sdhi0"; - }; - - fsia_pins: sounda { - renesas,groups = "fsia_sclk_in", "fsia_mclk_out", - "fsia_data_in_1", "fsia_data_out_0"; - renesas,function = "fsia"; - }; -}; - -&tpu { - status = "okay"; -}; - -&mmcif0 { - pinctrl-0 = <&mmc0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <®_3p3v>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&scifa1 { - pinctrl-0 = <&scifa1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - bus-width = <4>; - cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&sh_fsi2 { - pinctrl-0 = <&fsia_pins>; - pinctrl-names = "default"; - - status = "okay"; -};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index a06a11e..effb7b4 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -10,10 +10,18 @@ /dts-v1/; #include "r8a7740.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> / { model = "armadillo 800 eva"; - compatible = "renesas,armadillo800eva"; + compatible = "renesas,armadillo800eva", "renesas,r8a7740"; + + aliases { + serial1 = &scifa1; + }; chosen { bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; @@ -23,4 +31,270 @@ device_type = "memory"; reg = <0x40000000 0x20000000>; }; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sdhi0: regulator@1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pfc 75 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator@2 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sdhi0>; + + enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>; + gpios = <&pfc 17 GPIO_ACTIVE_HIGH>; + states = <3300000 0 + 1800000 1>; + + enable-active-high; + }; + + reg_5p0v: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-5.0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&pfc 99 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "SW3"; + gpio-key,wakeup; + }; + + back-key { + gpios = <&pfc 100 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + label = "SW4"; + }; + + menu-key { + gpios = <&pfc 97 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + label = "SW5"; + }; + + home-key { + gpios = <&pfc 98 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + label = "SW6"; + }; + }; + + leds { + compatible = "gpio-leds"; + led3 { + gpios = <&pfc 102 GPIO_ACTIVE_HIGH>; + label = "LED3"; + }; + led4 { + gpios = <&pfc 111 GPIO_ACTIVE_HIGH>; + label = "LED4"; + }; + led5 { + gpios = <&pfc 110 GPIO_ACTIVE_HIGH>; + label = "LED5"; + }; + led6 { + gpios = <&pfc 177 GPIO_ACTIVE_HIGH>; + label = "LED6"; + }; + }; + + i2c2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */ + &pfc 91 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; + brightness-levels = <0 1 2 4 8 16 32 64 128 255>; + default-brightness-level = <9>; + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + power-supply = <®_5p0v>; + enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + bitclock-inversion; + }; + + simple-audio-card,codec { + sound-dai = <&wm8978>; + bitclock-master; + frame-master; + system-clock-frequency = <12288000>; + }; + }; +}; + +ðer { + pinctrl-0 = <ðer_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy0>; + status = "ok"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&extal1_clk { + clock-frequency = <25000000>; +}; +&extal2_clk { + clock-frequency = <48000000>; +}; +&fsibck_clk { + clock-frequency = <12288000>; +}; +&cpg_clocks { + renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */ +}; + +&cmt1 { + status = "ok"; +}; + +&i2c0 { + status = "okay"; + touchscreen@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupt-parent = <&irqpin1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&st1232_pins>; + pinctrl-names = "default"; + gpios = <&pfc 166 GPIO_ACTIVE_LOW>; + }; + + wm8978: wm8978@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; +}; + +&i2c2 { + status = "okay"; + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; +}; + +&pfc { + ether_pins: ether { + renesas,groups = "gether_mii", "gether_int"; + renesas,function = "gether"; + }; + + scifa1_pins: serial1 { + renesas,groups = "scifa1_data"; + renesas,function = "scifa1"; + }; + + st1232_pins: touchscreen { + renesas,groups = "intc_irq10"; + renesas,function = "intc"; + }; + + backlight_pins: backlight { + renesas,groups = "tpu0_to2_1"; + renesas,function = "tpu0"; + }; + + mmc0_pins: mmc0 { + renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1"; + renesas,function = "mmc0"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; + + fsia_pins: sounda { + renesas,groups = "fsia_sclk_in", "fsia_mclk_out", + "fsia_data_in_1", "fsia_data_out_0"; + renesas,function = "fsia"; + }; +}; + +&tpu { + status = "okay"; +}; + +&mmcif0 { + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&scifa1 { + pinctrl-0 = <&scifa1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sh_fsi2 { + pinctrl-0 = <&fsia_pins>; + pinctrl-names = "default"; + + status = "okay"; };
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index bda18fb..d46c213 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -10,6 +10,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/clock/r8a7740-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -40,6 +41,18 @@ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; }; + cmt1: timer@e6138000 { + compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48"; + reg = <0xe6138000 0x170>; + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7740_CLK_CMT1>; + clock-names = "fck"; + + renesas,channels-mask = <0x3f>; + + status = "disabled"; + }; + /* irqpin0: IRQ0 - IRQ7 */ irqpin0: irqpin@e6900000 { compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; @@ -125,7 +138,7 @@ reg = <0xe9a00000 0x800>, <0xe9a01800 0x800>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; - /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */ + clocks = <&mstp3_clks R8A7740_CLK_GETHER>; phy-mode = "mii"; #address-cells = <1>; #size-cells = <0>; @@ -141,6 +154,7 @@ 0 202 IRQ_TYPE_LEVEL_HIGH 0 203 IRQ_TYPE_LEVEL_HIGH 0 204 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_IIC0>; status = "disabled"; }; @@ -153,6 +167,7 @@ 0 71 IRQ_TYPE_LEVEL_HIGH 0 72 IRQ_TYPE_LEVEL_HIGH 0 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7740_CLK_IIC1>; status = "disabled"; }; @@ -160,6 +175,8 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c40000 0x100>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -167,6 +184,8 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c50000 0x100>; interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -174,6 +193,8 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c60000 0x100>; interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -181,6 +202,8 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c70000 0x100>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -188,6 +211,8 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c80000 0x100>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -195,6 +220,8 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cb0000 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -202,6 +229,8 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cc0000 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -209,6 +238,8 @@ compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cd0000 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -216,6 +247,8 @@ compatible = "renesas,scifb-r8a7740", "renesas,scifb"; reg = <0xe6c30000 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -239,6 +272,7 @@ tpu: pwm@e6600000 { compatible = "renesas,tpu-r8a7740", "renesas,tpu"; reg = <0xe6600000 0x100>; + clocks = <&mstp3_clks R8A7740_CLK_TPU0>; status = "disabled"; #pwm-cells = <3>; }; @@ -248,6 +282,7 @@ reg = <0xe6bd0000 0x100>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH 0 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7740_CLK_MMC>; status = "disabled"; }; @@ -257,6 +292,7 @@ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH 0 118 IRQ_TYPE_LEVEL_HIGH 0 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7740_CLK_SDHI0>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -268,6 +304,7 @@ interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH 0 122 IRQ_TYPE_LEVEL_HIGH 0 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7740_CLK_SDHI1>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -279,6 +316,7 @@ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH 0 126 IRQ_TYPE_LEVEL_HIGH 0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7740_CLK_SDHI2>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -289,6 +327,186 @@ compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; reg = <0xfe1f0000 0x400>; interrupts = <0 9 0x4>; + clocks = <&mstp3_clks R8A7740_CLK_FSI>; status = "disabled"; }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* External root clock */ + extalr_clk: extalr_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "extalr"; + }; + extal1_clk: extal1_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "extal1"; + }; + extal2_clk: extal2_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "extal2"; + }; + dv_clk: dv_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "dv"; + }; + fsiack_clk: fsiack_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "fsiack"; + }; + fsibck_clk: fsibck_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "fsibck"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7740-cpg-clocks"; + reg = <0xe6150000 0x10000>; + clocks = <&extal1_clk>, <&extalr_clk>; + #clock-cells = <1>; + clock-output-names = "system", "pllc0", "pllc1", + "pllc2", "r", + "usb24s", + "i", "zg", "b", "m1", "hp", + "hpp", "usbp", "s", "zb", "m3", + "cp"; + }; + + /* Variable factor clocks (DIV6) */ + sub_clk: sub_clk@e6150080 { + compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150080 4>; + clocks = <&pllc1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sub"; + }; + + /* Fixed factor clocks */ + pllc1_div2_clk: pllc1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7740_CLK_PLLC1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pllc1_div2"; + }; + extal1_div2_clk: extal1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal1_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "extal1_div2"; + }; + + /* Gate clocks */ + subck_clks: subck_clks@e6150080 { + compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150080 4>; + clocks = <&sub_clk>, <&sub_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2 + >; + clock-output-names = + "subck", "subck2"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150134 4>, <0xe6150038 4>; + clocks = <&cpg_clocks R8A7740_CLK_S>, + <&cpg_clocks R8A7740_CLK_S>, <&sub_clk>, + <&cpg_clocks R8A7740_CLK_B>, + <&sub_clk>, <&sub_clk>, + <&cpg_clocks R8A7740_CLK_B>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0 + R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1 + R8A7740_CLK_LCDC0 + >; + clock-output-names = + "ceu21", "ceu20", "tmu0", "lcdc1", "iic0", + "tmu1", "lcdc0"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150138 4>, <0xe6150040 4>; + clocks = <&sub_clk>, <&sub_clk>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>, + <&sub_clk>, <&sub_clk>, <&sub_clk>, + <&sub_clk>, <&sub_clk>, <&sub_clk>, + <&sub_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7740_CLK_SCIFA6 R8A7740_CLK_SCIFA7 + R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2 + R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC + R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB + R8A7740_CLK_SCIFA0 R8A7740_CLK_SCIFA1 + R8A7740_CLK_SCIFA2 R8A7740_CLK_SCIFA3 + R8A7740_CLK_SCIFA4 + >; + clock-output-names = + "scifa6", "scifa7", "dmac1", "dmac2", "dmac3", + "usbdmac", "scifa5", "scifb", "scifa0", "scifa1", + "scifa2", "scifa3", "scifa4"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe615013c 4>, <0xe6150048 4>; + clocks = <&cpg_clocks R8A7740_CLK_R>, + <&cpg_clocks R8A7740_CLK_HP>, + <&sub_clk>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1 + R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1 + R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0 + >; + clock-output-names = + "cmt1", "fsi", "iic1", "usbf", "sdhi0", "sdhi1", + "mmc", "gether", "tpu0"; + }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150140 4>, <0xe615004c 4>; + clocks = <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>, + <&cpg_clocks R8A7740_CLK_HP>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7740_CLK_USBH R8A7740_CLK_SDHI2 + R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY + >; + clock-output-names = + "usbhost", "sdhi2", "usbfunc", "usphy"; + }; + }; };
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index ecfdf4b..315ec62 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -23,8 +23,14 @@ interrupt-parent = <&gic>; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a9"; + reg = <0>; + clock-frequency = <800000000>; }; };
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 5745555..c160404 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -78,6 +78,10 @@ clock-frequency = <31250000>; }; +&tmu0 { + status = "okay"; +}; + &pfc { lan0_pins: lan0 { intc {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 58d0d95..7cfba9a 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -199,7 +199,6 @@ scif0: serial@ffe40000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe40000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -209,7 +208,6 @@ scif1: serial@ffe41000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe41000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -219,7 +217,6 @@ scif2: serial@ffe42000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe42000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -229,7 +226,6 @@ scif3: serial@ffe43000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe43000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -239,7 +235,6 @@ scif4: serial@ffe44000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe44000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -249,7 +244,6 @@ scif5: serial@ffe45000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe45000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -262,10 +256,52 @@ }; thermal@ffc48000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; reg = <0xffc48000 0x38>; }; + tmu0: timer@ffd80000 { + compatible = "renesas,tmu-r8a7779", "renesas,tmu"; + reg = <0xffd80000 0x30>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_TMU0>; + clock-names = "fck"; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu1: timer@ffd81000 { + compatible = "renesas,tmu-r8a7779", "renesas,tmu"; + reg = <0xffd81000 0x30>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_TMU1>; + clock-names = "fck"; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu2: timer@ffd82000 { + compatible = "renesas,tmu-r8a7779", "renesas,tmu"; + reg = <0xffd82000 0x30>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, + <0 41 IRQ_TYPE_LEVEL_HIGH>, + <0 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_TMU2>; + clock-names = "fck"; + + #renesas,channels = <3>; + + status = "disabled"; + }; + sata: sata@fc600000 { compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; @@ -404,10 +440,10 @@ /* Gate clocks */ mstp0_clks: clocks@ffc80030 { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc80030 4>; clocks = <&cpg_clocks R8A7779_CLK_S>, - <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_S>, @@ -441,7 +477,7 @@ }; mstp1_clks: clocks@ffc80034 { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc80034 4>, <0xffc80044 4>; clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, @@ -470,7 +506,7 @@ }; mstp3_clks: clocks@ffc8003c { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc8003c 4>; clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 856b423..69098b9 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -32,7 +32,7 @@ reg = <0 0x40000000 0 0x40000000>; }; - memory@180000000 { + memory@140000000 { device_type = "memory"; reg = <1 0x40000000 0 0xc0000000>; }; @@ -234,6 +234,11 @@ renesas,groups = "usb2"; renesas,function = "usb2"; }; + + vin1_pins: vin { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -252,6 +257,10 @@ }; }; +&cmt0 { + status = "ok"; +}; + &mmcif1 { pinctrl-0 = <&mmc1_pins>; pinctrl-names = "default"; @@ -366,6 +375,19 @@ status = "ok"; pinctrl-0 = <&iic2_pins>; pinctrl-names = "default"; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; }; &iic3 { @@ -374,7 +396,7 @@ status = "okay"; vdd_dvfs: regulator@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <1000000>; @@ -401,3 +423,21 @@ pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; }; + +/* composite video input */ +&vin1 { + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + status = "ok"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep0: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index d9ddecb..d0e1773 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -33,6 +33,10 @@ spi2 = &msiof1; spi3 = &msiof2; spi4 = &msiof3; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; + vin3 = &vin3; }; cpus { @@ -206,6 +210,38 @@ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_CMT0>; + clock-names = "fck"; + + renesas,channels-mask = <0x60>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_CMT1>; + clock-names = "fck"; + + renesas,channels-mask = <0xff>; + + status = "disabled"; + }; + irqc0: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a7790", "renesas,irqc"; #interrupt-cells = <2>; @@ -217,6 +253,65 @@ <0 3 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -473,6 +568,38 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -741,33 +868,36 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 + R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = - "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>; + <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, + <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 + R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0 >; clock-output-names = "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "msiof3", "scifb2"; + "scifb1", "msiof1", "msiof3", "scifb2", + "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -884,6 +1014,8 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -892,9 +1024,11 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -902,9 +1036,11 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -912,9 +1048,11 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -922,9 +1060,11 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6c90000 0 0x0064>; + reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>; interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; + dmas = <&dmac0 0x45>, <&dmac0 0x46>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1018,7 +1158,6 @@ rcar_sound: rcar_sound@0xec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; - interrupt-parent = <&gic>; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 3a2ef0a..f1b56de 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -135,6 +135,11 @@ renesas,groups = "usb1"; renesas,function = "usb1"; }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; }; &scif0 { @@ -191,6 +196,19 @@ status = "okay"; clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; }; &qspi { @@ -260,3 +278,20 @@ &pciec { status = "okay"; }; + +/* composite video input */ +&vin0 { + status = "ok"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index be59014..07550e7 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -284,6 +284,11 @@ renesas,groups = "usb1"; renesas,function = "usb1"; }; + + vin1_pins: vin1 { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -302,6 +307,10 @@ }; }; +&cmt0 { + status = "ok"; +}; + &sata0 { status = "okay"; }; @@ -407,6 +416,19 @@ status = "okay"; clock-frequency = <400000>; + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>; @@ -419,7 +441,7 @@ clock-frequency = <100000>; vdd_dvfs: regulator@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <1000000>; @@ -452,3 +474,20 @@ &cpu0 { cpu0-supply = <&vdd_dvfs>; }; + +/* composite video input */ +&vin1 { + status = "ok"; + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 0d82a4b..e06c11f 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -34,6 +34,9 @@ spi1 = &msiof0; spi2 = &msiof1; spi3 = &msiof2; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; }; cpus { @@ -189,6 +192,38 @@ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7791_CLK_CMT0>; + clock-names = "fck"; + + renesas,channels-mask = <0x60>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_CMT1>; + clock-names = "fck"; + + renesas,channels-mask = <0xff>; + + status = "disabled"; + }; + irqc0: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a7791", "renesas,irqc"; #interrupt-cells = <2>; @@ -206,6 +241,66 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -518,6 +613,30 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -770,16 +889,16 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 + R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = - "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { @@ -925,6 +1044,8 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -933,9 +1054,11 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -943,9 +1066,11 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -953,9 +1078,11 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1029,7 +1156,6 @@ rcar_sound: rcar_sound@0xec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; - interrupt-parent = <&gic>; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts new file mode 100644 index 0000000..79d06ef --- /dev/null +++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -0,0 +1,47 @@ +/* + * Device Tree Source for the Alt board + * + * Copyright (C) 2014 Renesas Electronics Corporation + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7794.dtsi" + +/ { + model = "Alt"; + compatible = "renesas,alt", "renesas,r8a7794"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&cmt0 { + status = "ok"; +}; + +&scif2 { + status = "ok"; +};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi new file mode 100644 index 0000000..d4e8bce --- /dev/null +++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -0,0 +1,531 @@ +/* + * Device Tree Source for the r8a7794 SoC + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2014 Ulrich Hecht + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7794-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "renesas,r8a7794"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7794_CLK_CMT0>; + clock-names = "fck"; + + renesas,channels-mask = <0x60>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_CMT1>; + clock-names = "fck"; + + renesas,channels-mask = <0xff>; + + status = "disabled"; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7794", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c40000 0 64>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c50000 0 64>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c60000 0 64>; + interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c70000 0 64>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c78000 0 64>; + interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c80000 0 64>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6c20000 0 64>; + interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6c30000 0 64>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6ce0000 0 64>; + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ee0000 0 64>; + interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ee8000 0 64>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62d0000 0 96>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7794-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "z"; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + zg_clk: zg_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zg"; + }; + zx_clk: zx_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zx"; + }; + zs_clk: zs_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zs"; + }; + hp_clk: hp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "hp"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + b_clk: b_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "b"; + }; + p_clk: p_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "p"; + }; + cl_clk: cl_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cl"; + }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; + imp_clk: imp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "imp"; + }; + rclk_clk: rclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(48 * 1024)>; + clock-mult = <1>; + clock-output-names = "rclk"; + }; + oscclk_clk: oscclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(12 * 1024)>; + clock-mult = <1>; + clock-output-names = "oscclk"; + }; + zb3_clk: zb3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "zb3"; + }; + zb3d2_clk: zb3d2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "zb3d2"; + }; + ddr_clk: ddr_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "ddr"; + }; + mp_clk: mp_clk { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + clock-output-names = "mp"; + }; + cp_clk: cp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cp"; + }; + + acp_clk: acp_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "acp"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7794_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, + <&zs_clk>, <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_TMU1 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 + R8A7794_CLK_CMT0 R8A7794_CLK_TMU0 + >; + clock-output-names = + "tmu1", "tmu3", "tmu2", "cmt0", "tmu0"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0 + R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1 + R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2 + >; + clock-output-names = + "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", + "scifb1", "msiof1", "scifb2"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&rclk_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_CMT1 + >; + clock-output-names = + "cmt1"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 + R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 + R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 + R8A7794_CLK_SCIF0 + >; + clock-output-names = + "hscif2", "scif5", "scif4", "hscif1", "hscif0", + "scif3", "scif2", "scif1", "scif0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_ETHER + >; + clock-output-names = + "ether"; + }; + mstp11_clks: mstp11_clks@e615099c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5 + >; + clock-output-names = "scifa3", "scifa4", "scifa5"; + }; + }; +};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index c9d912d..d534451 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -152,12 +152,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &mmc1 { /* wifi */ @@ -168,11 +164,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &uart0 {
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 879a818..ad9c2db 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -179,6 +179,27 @@ bias-disable; }; + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>; + }; + + emmc_rst: emmc-rst { + rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>; + }; + + /* + * The data pins are shared between nandc and emmc and + * not accessible through pinctrl. Also they should've + * been already set correctly by firmware, as + * flash/emmc is the boot-device. + */ + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>, @@ -238,6 +259,42 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, @@ -406,6 +463,16 @@ pinctrl-0 = <&pwm3_out>; }; +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 5e4e3c23..15910c9 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -65,6 +65,19 @@ pinctrl-0 = <&ir_recv_pin>; }; + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + vcc_sd0: sdmmc-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -74,12 +87,52 @@ startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&emac { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; + + phy = <&phy0>; + phy-supply = <&vcc_rmii>; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; }; &i2c1 { status = "okay"; clock-frequency = <400000>; + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + #clock-cells = <0>; + clock-output-names = "xin32k"; + }; + act8846: act8846@5a { compatible = "active-semi,act8846"; reg = <0x5a>; @@ -149,7 +202,6 @@ regulator-name = "VCC_RMII"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; }; vccio_wl: REG10 { @@ -183,11 +235,8 @@ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &pinctrl { @@ -201,11 +250,32 @@ }; }; + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lan8720a { + phy_int: phy-int { + rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + ir-receiver { ir_recv_pin: ir-recv-pin { rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &uart0 { @@ -224,6 +294,14 @@ status = "okay"; }; +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + &wdt { status = "okay"; };
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ee801a9..ddaada7 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -147,6 +147,45 @@ bias-disable; }; + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_rst: emmc-rst { + rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>; + }; + + /* + * The data pins are shared between nandc and emmc and + * not accessible through pinctrl. Also they should've + * been already set correctly by firmware, as + * flash/emmc is the boot-device. + */ + }; + + emac { + emac_xfer: emac-xfer { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */ + <RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */ + <RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */ + <RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, /* rxd0 */ + <RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */ + <RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */ + <RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */ + <RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; /* crs_dvalid */ + }; + + emac_mdio: emac-mdio { + rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>, + <RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>, @@ -206,6 +245,42 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, @@ -323,6 +398,10 @@ }; }; +&emac { + compatible = "rockchip,rk3188-emac"; +}; + &global_timer { interrupts = <GIC_PPI 11 0xf04>; }; @@ -381,6 +460,18 @@ pinctrl-0 = <&pwm3_out>; }; +&spi0 { + compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; +}; + +&spi1 { + compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>;
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 7d59ff4..a76dd44 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -26,7 +26,7 @@ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; + pinctrl-0 = <&pmic_int>; #clock-cells = <0>; clock-output-names = "xin32k"; @@ -124,11 +124,3 @@ }; }; }; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 9a88b6c..ff522f8 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -16,3 +16,135 @@ / { compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; +};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4f57209..cb83cea 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -10,6 +10,7 @@ * GNU General Public License for more details. */ +#include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" / { @@ -17,6 +18,48 @@ reg = <0x0 0x80000000>; }; + backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -49,6 +92,30 @@ }; }; +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + &i2c0 { status = "okay"; }; @@ -57,6 +124,10 @@ status = "okay"; }; +&pwm0 { + status = "okay"; +}; + &uart0 { status = "okay"; }; @@ -78,12 +149,24 @@ }; &pinctrl { + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + buttons { pwrbtn: pwrbtn { rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; @@ -94,3 +177,7 @@ &usb_host0_ehci { status = "okay"; }; + +&usb_host1 { + status = "okay"; +};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 5950b0a..874e66d 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -29,11 +29,18 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + mshc0 = &emmc; + mshc1 = &sdmmc; + mshc2 = &sdio0; + mshc3 = &sdio1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; }; cpus { @@ -62,6 +69,44 @@ }; }; + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff250000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + + dmac_bus_ns: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff600000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dmac_bus_s: dma-controller@ffb20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffb20000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + }; + }; + xin24m: oscillator { compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -78,6 +123,95 @@ clock-frequency = <24000000>; }; + sdmmc: dwmmc@ff0c0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0c0000 0x4000>; + status = "disabled"; + }; + + sdio0: dwmmc@ff0d0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0d0000 0x4000>; + status = "disabled"; + }; + + sdio1: dwmmc@ff0e0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0e0000 0x4000>; + status = "disabled"; + }; + + emmc: dwmmc@ff0f0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0f0000 0x4000>; + status = "disabled"; + }; + + saradc: saradc@ff100000 { + compatible = "rockchip,saradc"; + reg = <0xff100000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@ff110000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; + reg = <0xff110000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff120000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; + reg = <0xff120000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@ff130000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; + reg = <0xff130000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c1: i2c@ff140000 { compatible = "rockchip,rk3288-i2c"; reg = <0xff140000 0x1000>; @@ -206,6 +340,26 @@ /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + usb_host1: usb@ff540000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0xff540000 0x40000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USBHOST1>; + clock-names = "otg"; + status = "disabled"; + }; + + usb_otg: usb@ff580000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0xff580000 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + status = "disabled"; + }; + usb_hsic: usb@ff5c0000 { compatible = "generic-ehci"; reg = <0xff5c0000 0x100>; @@ -241,6 +395,50 @@ status = "disabled"; }; + pwm0: pwm@ff680000 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680000 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm1: pwm@ff680010 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680010 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm2: pwm@ff680020 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680020 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm3: pwm@ff680030 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680030 0x10>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + pmu: power-management@ff730000 { compatible = "rockchip,rk3288-pmu", "syscon"; reg = <0xff730000 0x100>; @@ -271,6 +469,21 @@ status = "disabled"; }; + i2s: i2s@ff890000 { + compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; + reg = <0xff890000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; @@ -463,6 +676,17 @@ }; }; + i2s0 { + i2s0_bus: i2s0-bus { + rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>, + <6 1 RK_FUNC_1 &pcfg_pull_none>, + <6 2 RK_FUNC_1 &pcfg_pull_none>, + <6 3 RK_FUNC_1 &pcfg_pull_none>, + <6 4 RK_FUNC_1 &pcfg_pull_none>, + <6 8 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_clk: sdmmc-clk { rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>; @@ -488,6 +712,88 @@ }; }; + sdio0 { + sdio0_bus1: sdio0-bus1 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bus4: sdio0-bus4 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>, + <4 21 RK_FUNC_1 &pcfg_pull_up>, + <4 22 RK_FUNC_1 &pcfg_pull_up>, + <4 23 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdio0_cd: sdio0-cd { + rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_wp: sdio0-wp { + rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_pwr: sdio0-pwr { + rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bkpwr: sdio0-bkpwr { + rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_int: sdio0-int { + rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + sdio1 { + sdio1_bus1: sdio1-bus1 { + rockchip,pins = <3 24 4 &pcfg_pull_up>; + }; + + sdio1_bus4: sdio1-bus4 { + rockchip,pins = <3 24 4 &pcfg_pull_up>, + <3 25 4 &pcfg_pull_up>, + <3 26 4 &pcfg_pull_up>, + <3 27 4 &pcfg_pull_up>; + }; + + sdio1_cd: sdio1-cd { + rockchip,pins = <3 28 4 &pcfg_pull_up>; + }; + + sdio1_wp: sdio1-wp { + rockchip,pins = <3 29 4 &pcfg_pull_up>; + }; + + sdio1_bkpwr: sdio1-bkpwr { + rockchip,pins = <3 30 4 &pcfg_pull_up>; + }; + + sdio1_int: sdio1-int { + rockchip,pins = <3 31 4 &pcfg_pull_up>; + }; + + sdio1_cmd: sdio1-cmd { + rockchip,pins = <4 6 4 &pcfg_pull_up>; + }; + + sdio1_clk: sdio1-clk { + rockchip,pins = <4 7 4 &pcfg_pull_none>; + }; + + sdio1_pwr: sdio1-pwr { + rockchip,pins = <4 9 4 &pcfg_pull_up>; + }; + }; + emmc { emmc_clk: emmc-clk { rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>; @@ -524,6 +830,56 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spi2 { + spi2_cs1: spi2-cs1 { + rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_clk: spi2-clk { + rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_cs0: spi2-cs0 { + rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_rx: spi2-rx { + rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_tx: spi2-tx { + rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>, @@ -591,5 +947,29 @@ rockchip,pins = <5 15 3 &pcfg_pull_none>; }; }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <7 22 3 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <7 23 3 &pcfg_pull_none>; + }; + }; }; };
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 8caf85d..499468d 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -26,6 +26,49 @@ i2c2 = &i2c2; i2c3 = &i2c3; i2c4 = &i2c4; + mshc0 = &emmc; + mshc1 = &mmc0; + mshc2 = &mmc1; + spi0 = &spi0; + spi1 = &spi1; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac1_s: dma-controller@20018000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20018000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + }; + + dmac1_ns: dma-controller@2001c000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x2001c000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dmac2: dma-controller@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA2>; + clock-names = "apb_pclk"; + }; }; xin24m: oscillator { @@ -91,12 +134,45 @@ status = "disabled"; }; + usb_otg: usb@10180000 { + compatible = "rockchip,rk3066-usb", "snps,dwc2"; + reg = <0x10180000 0x40000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + status = "disabled"; + }; + + usb_host: usb@101c0000 { + compatible = "snps,dwc2"; + reg = <0x101c0000 0x40000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG1>; + clock-names = "otg"; + status = "disabled"; + }; + + emac: ethernet@10204000 { + compatible = "snps,arc-emac"; + reg = <0x10204000 0x3c>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref"; + max-speed = <100>; + phy-mode = "rmii"; + + status = "disabled"; + }; + mmc0: dwmmc@10214000 { compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10214000 0x1000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; @@ -108,8 +184,6 @@ compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10218000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; clock-names = "biu", "ciu"; @@ -117,6 +191,17 @@ status = "disabled"; }; + emmc: dwmmc@1021c000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x1021c000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + pmu: pmu@20004000 { compatible = "rockchip,rk3066-pmu", "syscon"; reg = <0x20004000 0x100>; @@ -135,7 +220,6 @@ #size-cells = <0>; rockchip,grf = <&grf>; - rockchip,bus-index = <0>; clock-names = "i2c"; clocks = <&cru PCLK_I2C0>; @@ -264,4 +348,36 @@ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; status = "disabled"; }; + + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@20070000 { + compatible = "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x20070000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@20074000 { + compatible = "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x20074000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; };
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 45013b8..5f4144d 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -177,6 +177,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; clocks = <&usart0_clk>; @@ -188,6 +191,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; clocks = <&usart1_clk>; @@ -333,6 +339,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; clocks = <&usart2_clk>; @@ -344,6 +353,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; clocks = <&usart3_clk>; @@ -402,14 +414,19 @@ }; ramc0: ramc@ffffea00 { - compatible = "atmel,at91sam9g45-ddramc"; + compatible = "atmel,sama5d3-ddramc"; reg = <0xffffea00 0x200>; + clocks = <&ddrck>, <&mpddr_clk>; + clock-names = "ddrck", "mpddr"; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; @@ -428,7 +445,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < /* A B C */ @@ -1003,6 +1020,11 @@ reg = <2>; }; + hsmc_clk: hsmc_clk { + #clock-cells = <0>; + reg = <5>; + }; + pioA_clk: pioA_clk { #clock-cells = <0>; reg = <6>; @@ -1170,6 +1192,11 @@ #clock-cells = <0>; reg = <48>; }; + + mpddr_clk: mpddr_clk { + #clock-cells = <0>; + reg = <49>; + }; }; }; @@ -1178,6 +1205,11 @@ reg = <0xfffffe00 0x10>; }; + shutdown-controller@fffffe10 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfffffe10 0x10>; + }; + pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; @@ -1393,6 +1425,7 @@ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; + clocks = <&hsmc_clk>; }; }; };
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index a077585..eaf4145 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -40,7 +40,7 @@ atmel,clk-output-range = <0 66000000>; }; - can1_clk: can0_clk { + can1_clk: can1_clk { #clock-cells = <0>; reg = <41>; atmel,clk-output-range = <0 66000000>;
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f7d8583..962dc28 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -36,6 +36,36 @@ macb0: ethernet@f0028000 { phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; }; pmc: pmc@fffffc00 {
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index b8c6f20..49c10d3 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -25,6 +25,8 @@ }; spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + m25p80@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; @@ -51,6 +53,7 @@ }; usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; status = "okay"; @@ -132,6 +135,7 @@ }; dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ status = "okay"; };
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi new file mode 100644 index 0000000..e0157b0 --- /dev/null +++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -0,0 +1,1240 @@ +/* + * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/at91.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Atmel SAMA5D4 family SoC"; + compatible = "atmel,sama5d4"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &usart3; + serial1 = &usart4; + serial2 = &usart2; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio4 = &pioE; + tcb0 = &tcb0; + tcb1 = &tcb1; + i2c2 = &i2c2; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb0: gadget@00400000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00400000 0x100000 + 0xfc02c000 0x4000>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep7 { + reg = <7>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep8 { + reg = <8>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep9 { + reg = <9>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep10 { + reg = <10>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep11 { + reg = <11>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep12 { + reg = <12>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep13 { + reg = <13>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep14 { + reg = <14>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep15 { + reg = <15>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + }; + + usb1: ohci@00500000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00500000 0x100000>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, + <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb2: ehci@00600000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00600000 0x100000>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ehci_clk", "uhpck"; + status = "disabled"; + }; + + L2: cache-controller@00a00000 { + compatible = "arm,pl310-cache"; + reg = <0x00a00000 0x1000>; + interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>; + cache-unified; + cache-level = <2>; + }; + + nand0: nand@80000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = < 0x80000000 0x08000000 /* EBI CS3 */ + 0xfc05c070 0x00000490 /* SMC PMECC regs */ + 0xfc05c500 0x00000100 /* SMC PMECC Error Location regs */ + >; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + status = "disabled"; + + nfc@90000000 { + compatible = "atmel,sama5d3-nfc"; + #address-cells = <1>; + #size-cells = <1>; + reg = < + 0x90000000 0x10000000 /* NFC Command Registers */ + 0xfc05c000 0x00000070 /* NFC HSMC regs */ + 0x00100000 0x00100000 /* NFC SRAM banks */ + >; + clocks = <&hsmc_clk>; + atmel,write-by-sram; + }; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramc0: ramc@f0010000 { + compatible = "atmel,sama5d3-ddramc"; + reg = <0xf0010000 0x200>; + clocks = <&ddrck>, <&mpddr_clk>; + clock-names = "ddrck", "mpddr"; + }; + + pmc: pmc@f0018000 { + compatible = "atmel,sama5d3-pmc"; + reg = <0xf0018000 0x120>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <100000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; + }; + + plla: pllack { + compatible = "atmel,sama5d3-clk-pll"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <12000000 12000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <125000000 177000000>; + atmel,clk-divisors = <1 2 4 3>; + }; + + h32ck: h32mxck { + #clock-cells = <0>; + compatible = "atmel,sama5d4-clk-h32mx"; + clocks = <&mck>; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + lcdck: lcdck { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + smdck: smdck { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + }; + + periph32ck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&h32ck>; + + pioD_clk: pioD_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + icm_clk: icm_clk { + #clock-cells = <0>; + reg = <9>; + }; + + aes_clk: aes_clk { + #clock-cells = <0>; + reg = <12>; + }; + + tdes_clk: tdes_clk { + #clock-cells = <0>; + reg = <14>; + }; + + sha_clk: sha_clk { + #clock-cells = <0>; + reg = <15>; + }; + + matrix1_clk: matrix1_clk { + #clock-cells = <0>; + reg = <17>; + }; + + hsmc_clk: hsmc_clk { + #clock-cells = <0>; + reg = <22>; + }; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <23>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <24>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <25>; + }; + + pioE_clk: pioE_clk { + #clock-cells = <0>; + reg = <26>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <27>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <28>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <29>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <30>; + }; + + usart4_clk: usart4_clk { + #clock-cells = <0>; + reg = <31>; + }; + + twi0_clk: twi0_clk { + reg = <32>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <33>; + }; + + twi2_clk: twi2_clk { + #clock-cells = <0>; + reg = <34>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <35>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <36>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <37>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <38>; + }; + + spi2_clk: spi2_clk { + #clock-cells = <0>; + reg = <39>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <40>; + }; + + tcb1_clk: tcb1_clk { + #clock-cells = <0>; + reg = <41>; + }; + + tcb2_clk: tcb2_clk { + #clock-cells = <0>; + reg = <42>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <43>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <44>; + }; + + dbgu_clk: dbgu_clk { + #clock-cells = <0>; + reg = <45>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <46>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <47>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <48>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <49>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <53>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <54>; + }; + + macb1_clk: macb1_clk { + #clock-cells = <0>; + reg = <55>; + }; + + fuse_clk: fuse_clk { + #clock-cells = <0>; + reg = <57>; + }; + + securam_clk: securam_clk { + #clock-cells = <0>; + reg = <59>; + }; + + smd_clk: smd_clk { + #clock-cells = <0>; + reg = <61>; + }; + + twi3_clk: twi3_clk { + #clock-cells = <0>; + reg = <62>; + }; + + catb_clk: catb_clk { + #clock-cells = <0>; + reg = <63>; + }; + }; + + periph64ck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <8>; + }; + + cpkcc_clk: cpkcc_clk { + #clock-cells = <0>; + reg = <10>; + }; + + aesb_clk: aesb_clk { + #clock-cells = <0>; + reg = <13>; + }; + + mpddr_clk: mpddr_clk { + #clock-cells = <0>; + reg = <16>; + }; + + matrix0_clk: matrix0_clk { + #clock-cells = <0>; + reg = <18>; + }; + + vdec_clk: vdec_clk { + #clock-cells = <0>; + reg = <19>; + }; + + dma1_clk: dma1_clk { + #clock-cells = <0>; + reg = <50>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <51>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <52>; + }; + }; + }; + + mmc0: mmc@f8000000 { + compatible = "atmel,hsmci"; + reg = <0xf8000000 0x600>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + }; + + spi0: spi@f8010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf8010000 0x100>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + i2c0: i2c@f8014000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8014000 0x4000>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + tcb0: timer@f801c000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf801c000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; + }; + + macb0: ethernet@f8020000 { + compatible = "atmel,sama5d4-gem"; + reg = <0xf8020000 0x100>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + i2c2: i2c@f8024000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8024000 0x4000>; + interrupts = <34 4 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi2_clk>; + status = "disabled"; + }; + + mmc1: mmc@fc000000 { + compatible = "atmel,hsmci"; + reg = <0xfc000000 0x600>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; + }; + + usart2: serial@fc008000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc008000 0x100>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>; + clocks = <&usart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart3: serial@fc00c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc00c000 0x100>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart4: serial@fc010000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc010000 0x100>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart4>; + clocks = <&usart4_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + tcb1: timer@fc020000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xfc020000 0x100>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb1_clk>; + clock-names = "t0_clk"; + }; + + adc0: adc@fc034000 { + compatible = "atmel,at91sam9x5-adc"; + reg = <0xfc034000 0x100>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = < + /* external trigger is conflict with USBA_VBUS */ + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-channels-used = <0x01f>; + atmel,adc-startup-time = <40>; + atmel,adc-use-external; + atmel,adc-vref = <3000>; + atmel,adc-res = <8 10>; + atmel,adc-sample-hold-time = <11>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-ts-pressure-threshold = <10000>; + status = "disabled"; + + trigger@0 { + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + trigger@1 { + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + trigger@2 { + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + trigger@3 { + trigger-name = "continuous"; + trigger-value = <0x6>; + }; + }; + + rstc@fc068600 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfc068600 0x10>; + }; + + shdwc@fc068610 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfc068610 0x10>; + }; + + pit: timer@fc068630 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfc068630 0xf>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&h32ck>; + }; + + watchdog@fc068640 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfc068640 0x10>; + status = "disabled"; + }; + + sckc@fc068650 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfc068650 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <250000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + + rtc@fc0686b0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfc0686b0 0x30>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + }; + + dbgu: serial@fc069000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc069000 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&dbgu_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + + pinctrl@fc06a000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfc06a000 0xfc06a000 0x4000>; + /* WARNING: revisit as pin spec has changed */ + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */ + 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */ + 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */ + 0x00000000 0x00000000 0x00000000 /* pioD */ + 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */ + >; + + pioA: gpio@fc06a000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc06a000 0x100>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + }; + + pioB: gpio@fc06b000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc06b000 0x100>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + }; + + pioC: gpio@fc06c000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc06c000 0x100>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + }; + + pioE: gpio@fc06d000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc06d000 0x100>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioE_clk>; + }; + + /* pinctrl pin settings */ + adc0 { + pinctrl_adc0_adtrg: adc0_adtrg { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with USBA_VBUS */ + }; + pinctrl_adc0_ad0: adc0_ad0 { + atmel,pins = + <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad1: adc0_ad1 { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad2: adc0_ad2 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad3: adc0_ad3 { + atmel,pins = + <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad4: adc0_ad4 { + atmel,pins = + <AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>, /* conflicts with D14 and TDI */ + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with D15 and TDO */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */ + AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX0 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX1 */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX0 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXDV */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXER */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXEN */ + AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXCK */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDIO */ + >; + }; + }; + + mmc0 { + pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { + atmel,pins = + <AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* MCI0_CK, conflict with PCK1(ISI_MCK) */ + AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_CDB, conflict with NAND_D0 */ + AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB0, conflict with NAND_D1 */ + >; + }; + pinctrl_mmc0_dat1_3: mmc0_dat1_3 { + atmel,pins = + <AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB1, conflict with NAND_D2 */ + AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB2, conflict with NAND_D3 */ + AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB3, conflict with NAND_D4 */ + >; + }; + }; + + mmc1 { + pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { + atmel,pins = + <AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* MCI1_CK */ + AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_CDA */ + AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA0 */ + >; + }; + pinctrl_mmc1_dat1_3: mmc1_dat1_3 { + atmel,pins = + <AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA1 */ + AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA2 */ + AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA3 */ + >; + }; + }; + + nand0 { + pinctrl_nand: nand-0 { + atmel,pins = + <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A Read Enable */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A Write Enable */ + + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC17 ALE */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC18 CLE */ + + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC15 NCS3/Chip Enable */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC16 NANDRDY */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 Data bit 0 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 Data bit 1 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 Data bit 2 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 Data bit 3 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 Data bit 4 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 Data bit 5 */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A Data bit 6 */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC12 periph A Data bit 7 */ + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MISO */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MOSI */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_SPCK */ + >; + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD - conflicts with G0_CRS, ISI_HSYNC */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD - conflicts with G0_COL, PCK2 */ + >; + }; + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_RX3, PWMH1 */ + }; + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_TXER, ISI_VSYNC */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ + AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + }; + + usart4 { + pinctrl_usart4: usart4-0 { + atmel,pins = + <AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ + AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + pinctrl_usart4_rts: usart4_rts-0 { + atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with NWAIT, A19 */ + }; + pinctrl_usart4_cts: usart4_cts-0 { + atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with A0/NBS0, MCI0_CDB */ + }; + }; + }; + + aic: interrupt-controller@fc06e000 { + #interrupt-cells = <3>; + compatible = "atmel,sama5d4-aic"; + interrupt-controller; + reg = <0xfc06e000 0x200>; + atmel,external-irqs = <56>; + }; + }; + }; +};
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi index 249f65be2..f863a10 100644 --- a/arch/arm/boot/dts/sh7372.dtsi +++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -21,6 +21,7 @@ compatible = "arm,cortex-a8"; device_type = "cpu"; reg = <0x0>; + clock-frequency = <800000000>; }; };
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 18662ae..30ef97e 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -66,7 +66,7 @@ }; vmmc_sdhi0: regulator@2 { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -75,7 +75,7 @@ }; vmmc_sdhi2: regulator@3 { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -173,6 +173,10 @@ }; }; +&cmt1 { + status = "ok"; +}; + &i2c0 { status = "okay"; as3711@40 {
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 910b790..030a592 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -14,6 +14,7 @@ / { compatible = "renesas,sh73a0"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -23,11 +24,13 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <1196000000>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clock-frequency = <1196000000>; }; }; @@ -45,6 +48,16 @@ <0 56 IRQ_TYPE_LEVEL_HIGH>; }; + cmt1: timer@e6138000 { + compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48"; + reg = <0xe6138000 0x200>; + interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; + + renesas,channels-mask = <0x3f>; + + status = "disabled"; + }; + irqpin0: irqpin@e6900000 { compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; @@ -54,7 +67,6 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupt-parent = <&gic>; interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH 0 2 IRQ_TYPE_LEVEL_HIGH 0 3 IRQ_TYPE_LEVEL_HIGH @@ -74,7 +86,6 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupt-parent = <&gic>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH 0 10 IRQ_TYPE_LEVEL_HIGH 0 11 IRQ_TYPE_LEVEL_HIGH @@ -95,7 +106,6 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupt-parent = <&gic>; interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH @@ -115,7 +125,6 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupt-parent = <&gic>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH 0 26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH @@ -131,7 +140,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH 0 168 IRQ_TYPE_LEVEL_HIGH 0 169 IRQ_TYPE_LEVEL_HIGH @@ -144,7 +152,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH 0 52 IRQ_TYPE_LEVEL_HIGH 0 53 IRQ_TYPE_LEVEL_HIGH @@ -157,7 +164,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH 0 172 IRQ_TYPE_LEVEL_HIGH 0 173 IRQ_TYPE_LEVEL_HIGH @@ -170,7 +176,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH 0 184 IRQ_TYPE_LEVEL_HIGH 0 185 IRQ_TYPE_LEVEL_HIGH @@ -183,7 +188,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH 0 188 IRQ_TYPE_LEVEL_HIGH 0 189 IRQ_TYPE_LEVEL_HIGH @@ -194,7 +198,6 @@ mmcif: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH 0 141 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; @@ -204,7 +207,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH 0 84 IRQ_TYPE_LEVEL_HIGH 0 85 IRQ_TYPE_LEVEL_HIGH>; @@ -216,7 +218,6 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH 0 89 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; @@ -227,7 +228,6 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH 0 105 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; @@ -238,7 +238,6 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -246,7 +245,6 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -254,7 +252,6 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -262,7 +259,6 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -270,7 +266,6 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -278,7 +273,6 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -286,7 +280,6 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -294,7 +287,6 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -302,7 +294,6 @@ scifb8: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -328,7 +319,6 @@ #sound-dai-cells = <1>; compatible = "renesas,sh_fsi2"; reg = <0xec230000 0x400>; - interrupt-parent = <&gic>; interrupts = <0 146 0x4>; status = "disabled"; };
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 4d77ad6..4472fd9 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -547,7 +547,7 @@ status = "disabled"; }; - gpio@ff708000 { + gpio0: gpio@ff708000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -555,7 +555,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio0: gpio-controller@0 { + porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -567,7 +567,7 @@ }; }; - gpio@ff709000 { + gpio1: gpio@ff709000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -575,7 +575,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio1: gpio-controller@0 { + portb: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -587,7 +587,7 @@ }; }; - gpio@ff70a000 { + gpio2: gpio@ff70a000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -595,7 +595,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio2: gpio-controller@0 { + portc: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -607,6 +607,17 @@ }; }; + sdr: sdr@ffc25000 { + compatible = "syscon"; + reg = <0xffc25000 0x1000>; + }; + + sdramedac { + compatible = "altr,sdram-edac"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 39 4>; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>;
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 12d1c2c..1907cc6 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -15,6 +15,8 @@ */ /dts-v1/; +/* First 4KB has trampoline code for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; #include "socfpga.dtsi" / { @@ -27,15 +29,12 @@ }; }; - dwmmc0@ff704000 { + mmc0: dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index d532d17..ccaf417 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -38,11 +38,11 @@ ethernet0 = &gmac1; }; - aliases { - /* this allow the ethaddr uboot environmnet variable contents - * to be added to the gmac1 device tree blob. - */ - ethernet0 = &gmac1; + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; }; @@ -75,6 +75,11 @@ }; }; +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + &usb1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index bf51182..28c05e7 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -16,6 +16,8 @@ */ /dts-v1/; +/* First 4KB has trampoline code for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; #include "socfpga.dtsi" / { @@ -28,15 +30,12 @@ }; }; - dwmmc0@ff704000 { + mmc0: dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet@ff702000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 45de151..258865d 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -53,6 +60,10 @@ rxc-skew-ps = <2000>; }; +&gpio1 { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -68,6 +79,12 @@ }; }; +&mmc0 { + cd-gpios = <&portb 18 0>; + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + &usb1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index d26f155..16ea6f5 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: vcc3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -53,6 +60,11 @@ rxc-skew-ps = <2000>; }; +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + &usb1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 09792b4..f9345e0 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -43,13 +43,10 @@ dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet@ff700000 {
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index fa5f2bb..9d34292 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -85,7 +85,8 @@ pcie0: pcie@b1000000 { compatible = "st,spear1340-pcie", "snps,dw-pcie"; - reg = <0xb1000000 0x4000>; + reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; + reg-names = "dbi", "config"; interrupts = <0 68 0x4>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 0 68 0x4>; @@ -95,15 +96,15 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */ - 0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ + ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ status = "disabled"; }; pcie1: pcie@b1800000 { compatible = "st,spear1340-pcie", "snps,dw-pcie"; - reg = <0xb1800000 0x4000>; + reg = <0xb1800000 0x4000>, <0x90000000 0x20000>; + reg-names = "dbi", "config"; interrupts = <0 69 0x4>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 0 69 0x4>; @@ -113,15 +114,15 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x00000800 0 0x90000000 0x90000000 0 0x00020000 /* configuration space */ - 0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */ + ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */ status = "disabled"; }; pcie2: pcie@b4000000 { compatible = "st,spear1340-pcie", "snps,dw-pcie"; - reg = <0xb4000000 0x4000>; + reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>; + reg-names = "dbi", "config"; interrupts = <0 70 0x4>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 0 70 0x4>; @@ -131,8 +132,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x00000800 0 0xc0000000 0xc0000000 0 0x00020000 /* configuration space */ - 0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */ + ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ status = "disabled"; };
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index e71df0f..13e1aa3 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -50,7 +50,8 @@ pcie0: pcie@b1000000 { compatible = "st,spear1340-pcie", "snps,dw-pcie"; - reg = <0xb1000000 0x4000>; + reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; + reg-names = "dbi", "config"; interrupts = <0 68 0x4>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 0 68 0x4>; @@ -60,8 +61,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */ - 0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ + ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ status = "disabled"; };
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 459cb63..380f914 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -339,12 +339,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -356,6 +366,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -451,6 +463,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -490,6 +504,8 @@ interrupts = <50>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 31>, <&dma 1 30>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -749,7 +765,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -760,7 +775,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -771,7 +785,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 24b0ad3..531272c 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -287,7 +287,7 @@ mbus_clk: clk@01c2015c { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + compatible = "allwinner,sun5i-a13-mbus-clk"; reg = <0x01c2015c 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; clock-output-names = "mbus"; @@ -300,12 +300,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -317,6 +327,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -403,6 +415,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -564,7 +578,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; }; @@ -575,7 +588,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; }; @@ -586,7 +598,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; };
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts new file mode 100644 index 0000000..8b3cd090 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -0,0 +1,130 @@ +/* + * Copyright 2014 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun5i-a13.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "HSG H702"; + compatible = "hsg,h702", "allwinner,sun5i-a13"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + /* + * There doesn't seem to be a GPIO for controlling + * usb1 vbus, despite the fex file saying otherwise. + */ + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_h702: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + uart1: serial@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + }; +};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index bf86e65..b131068 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -285,7 +285,7 @@ mbus_clk: clk@01c2015c { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + compatible = "allwinner,sun5i-a13-mbus-clk"; reg = <0x01c2015c 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; clock-output-names = "mbus"; @@ -298,12 +298,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -315,6 +325,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -376,6 +388,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -490,7 +504,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -501,7 +514,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -512,7 +524,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index e06fbfc..543f895 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -3,12 +3,48 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -657,7 +693,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <0 6 4>; clocks = <&apb2_gates 0>; - clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; #address-cells = <1>; @@ -669,7 +704,6 @@ reg = <0x01c2b000 0x400>; interrupts = <0 7 4>; clocks = <&apb2_gates 1>; - clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; #address-cells = <1>; @@ -681,7 +715,6 @@ reg = <0x01c2b400 0x400>; interrupts = <0 8 4>; clocks = <&apb2_gates 2>; - clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; #address-cells = <1>; @@ -693,7 +726,6 @@ reg = <0x01c2b800 0x400>; interrupts = <0 9 4>; clocks = <&apb2_gates 3>; - clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; #address-cells = <1>; @@ -787,6 +819,12 @@ interrupts = <1 9 0xf04>; }; + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <0 40 4>, <0 41 4>; + }; + nmi_intc: interrupt-controller@01f00c0c { compatible = "allwinner,sun6i-a31-sc-nmi"; interrupt-controller;
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts new file mode 100644 index 0000000..0e4bfa3 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -0,0 +1,236 @@ +/* + * Copyright 2013 Wills Wang + * + * Wills Wang <wills.wang.open@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Merrii A20 Hummingbird"; + compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_mmc3_vdd>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pio: pinctrl@01c20800 { + ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { + allwinner,pins = "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + pwm: pwm@01c20e00 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + uart2: serial@01c28800 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; + }; + + uart3: serial@01c28c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; + }; + + uart4: serial@01c29000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; + }; + + uart5: serial@01c29400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + + i2c3: i2c@01c2b800 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; + }; + + spi2: spi@01c17000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_vdd>; + /* phy reset config */ + snps,reset-gpio = <&pio 0 17 0>; /* PA17 */ + snps,reset-active-low; + /* wait 1s after reset, otherwise fail to read phy id */ + snps,reset-delays-us = <0 10000 1000000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; + gpio = <&pio 7 15 0>; /* PH15 */ + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; + gpio = <&pio 7 2 0>; /* PH2 */ + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_mmc3_vdd: mmc3_vdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>; + regulator-name = "mmc3_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 7 9 0>; /* PH9 */ + }; + + reg_gmac_vdd: gmac_vdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>; + regulator-name = "gmac_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 7 16 0>; /* PH16 */ + }; +};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts new file mode 100644 index 0000000..1eb8175 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -0,0 +1,137 @@ +/* + * This is based on sun4i-a10-olinuxino-lime.dts + * + * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> + * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Olimex A20-OLinuXino-LIME"; + compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; + + green { + label = "a20-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 0>; + default-state = "on"; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 0>; + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; +};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 4011628..82097c9 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -3,12 +3,48 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -346,7 +382,7 @@ mbus_clk: clk@01c2015c { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + compatible = "allwinner,sun5i-a13-mbus-clk"; reg = <0x01c2015c 0x4>; clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; clock-output-names = "mbus"; @@ -423,12 +459,22 @@ interrupts = <0 0 4>; }; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 27 4>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <0 10 4>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -440,6 +486,8 @@ interrupts = <0 11 4>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -535,6 +583,8 @@ interrupts = <0 12 4>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -574,6 +624,8 @@ interrupts = <0 50 4>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 31>, <&dma 1 30>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -618,6 +670,27 @@ allwinner,pull = <0>; }; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart4_pins_a: uart4@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "uart4"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart5_pins_a: uart5@0 { + allwinner,pins = "PI10", "PI11"; + allwinner,function = "uart5"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart6_pins_a: uart6@0 { allwinner,pins = "PI12", "PI13"; allwinner,function = "uart6"; @@ -653,6 +726,13 @@ allwinner,pull = <0>; }; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PI0", "PI1"; + allwinner,function = "i2c3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -718,6 +798,13 @@ allwinner,pull = <0>; }; + spi2_pins_b: spi2@1 { + allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; @@ -899,7 +986,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <0 7 4>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -910,7 +996,6 @@ reg = <0x01c2b000 0x400>; interrupts = <0 8 4>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -921,7 +1006,6 @@ reg = <0x01c2b400 0x400>; interrupts = <0 9 4>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -932,7 +1016,6 @@ reg = <0x01c2b800 0x400>; interrupts = <0 88 4>; clocks = <&apb1_gates 3>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -943,7 +1026,6 @@ reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 34002e3..e9b8cca 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun8i-a23.dtsi" +/include/ "sunxi-common-regulators.dtsi" / { model = "Ippo Q8H Dual Core Tablet (v5)"; @@ -23,7 +24,47 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 0>; /* PB4 */ + cd-inverted; + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + /* pull-ups and devices require PMIC regulator */ + status = "failed"; + }; + r_uart: serial@01f02800 { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; };
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 54ac0787..6146ef1 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -3,12 +3,48 @@ * * Chen-Yu Tsai <wens@csie.org> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -179,6 +215,30 @@ "apb2_uart1", "apb2_uart2", "apb2_uart3", "apb2_uart4"; }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc2"; + }; }; soc@01c00000 { @@ -187,6 +247,104 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-a23-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = <0 60 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = <0 61 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = <0 62 4>; + status = "disabled"; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a23-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <0 11 4>, + <0 15 4>, + <0 17 4>; + clocks = <&apb1_gates 5>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PE12", "PE13"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + ahb1_rst: reset@01c202c0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-clock-reset"; @@ -227,6 +385,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 16>; resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -238,6 +398,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 17>; resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -249,6 +411,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 18>; resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -260,6 +424,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 19>; resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -271,9 +437,44 @@ reg-io-width = <4>; clocks = <&apb2_gates 20>; resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <0 6 4>; + clocks = <&apb2_gates 0>; + resets = <&apb2_rst 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <0 7 4>; + clocks = <&apb2_gates 1>; + resets = <&apb2_rst 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <0 8 4>; + clocks = <&apb2_gates 2>; + resets = <&apb2_rst 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, @@ -285,6 +486,12 @@ interrupts = <1 9 0xf04>; }; + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <0 40 4>, <0 41 4>; + }; + prcm@01f01400 { compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; @@ -339,5 +546,25 @@ resets = <&apb0_rst 4>; status = "disabled"; }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-a23-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <0 45 4>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + r_uart_pins_a: r_uart@0 { + allwinner,pins = "PL2", "PL3"; + allwinner,function = "s_uart"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; }; };
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 3d021ef..c9c5b10 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -86,4 +86,11 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; };
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 80b8edd..2ca9c18 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -157,6 +157,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra114-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra114-apbdma"; reg = <0x6000a000 0x1400>;
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 624b0fb..029c9a02 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -16,6 +16,26 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + pcie-controller@0,01003000 { + status = "okay"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-supply = <&vdd_3v3_lp0>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + vddio-pex-ctl-supply = <&vdd_3v3_lp0>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + }; + host1x@0,50000000 { hdmi@0,54280000 { status = "okay"; @@ -31,10 +51,10 @@ }; pinmux: pinmux@0,70000868 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; - state_default: pinmux { + state_boot: pinmux { clk_32k_out_pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; @@ -1231,6 +1251,41 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "pe"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; clk3_out_pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; @@ -1515,7 +1570,7 @@ regulator-always-on; }; - ldo0 { + avdd_1v05_run: ldo0 { regulator-name = "+1.05V_RUN_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -1619,6 +1674,18 @@ nvidia,sys-clock-req-active-high; }; + /* Serial ATA */ + sata@0,70020000 { + status = "okay"; + + hvdd-supply = <&vdd_3v3_lp0>; + vddio-supply = <&vdd_1v05_run>; + avdd-supply = <&vdd_1v05_run>; + + target-5v-supply = <&vdd_5v0_sata>; + target-12v-supply = <&vdd_12v0_sata>; + }; + padctl@0,7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; @@ -1828,6 +1895,29 @@ enable-active-high; vin-supply = <&vdd_5v0_sys>; }; + + /* Molex power connector */ + vdd_5v0_sata: regulator@13 { + compatible = "regulator-fixed"; + reg = <13>; + regulator-name = "+5V_SATA"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_12v0_sata: regulator@14 { + compatible = "regulator-fixed"; + reg = <14>; + regulator-name = "+12V_SATA"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; }; sound {
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts new file mode 100644 index 0000000..7d0784c --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -0,0 +1,1136 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124.dtsi" + +/ { + model = "Acer Chromebook 13 CB5-311"; + compatible = "google,nyan-big", "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@0,7000d000/pmic@40"; + rtc1 = "/rtc@0,7000e000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + sor@0,54540000 { + status = "okay"; + + nvidia,dpaux = <&dpaux>; + nvidia,panel = <&panel>; + }; + + dpaux@0,545c0000 { + vdd-supply = <&vdd_3v3_panel>; + status = "okay"; + }; + }; + + pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_default>; + + pinmux_default: common { + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4", + "pg5", + "pg6", + "pi3"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0", + "kb_row15_ps7", + "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5", + "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5", + "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + codec_irq_l { + nvidia,pins = "ph4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_bl_en { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + touch_irq_l { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + tpm_davint_l { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_irq_l { + nvidia,pins = "pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_reset_l { + nvidia,pins = "pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ts_shdn_l { + nvidia,pins = "pk1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_ap { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lid_open { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + en_vdd_sd { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ac_ok { + nvidia,pins = "pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sensor_irq_l { + nvidia,pins = "pi6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + wifi_en { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + en_vdd_bl { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + en_vdd_hdmi { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + soc_warm_reset_l { + nvidia,pins = "pi5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hp_det_l { + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + mic_det_l { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + serial@0,70006000 { + /* Debug connector on the bottom of the board near SD card. */ + status = "okay"; + }; + + pwm@0,7000a000 { + status = "okay"; + }; + + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + + acodec: audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + + #thermal-sensor-cells = <1>; + }; + }; + + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + }; + + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1 { + pins = "gpio1"; + function = "gpio"; + bias-pull-up; + }; + + gpio2_4_7 { + pins = "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_6 { + pins = "gpio3", "gpio6"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + bias-pull-down; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_run>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "+1.05V_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,ext-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+1.00V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + vdd_run_cam: ldo4 { + regulator-name = "+3.3V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+2.8V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + spi@0,7000d400 { + status = "okay"; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <3000000>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + + google,cros-ec-spi-msg-delay = <2000>; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + charger: bq24735@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + ti,ac-detect-gpios = <&gpio + TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + }; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; + power-supplies = <&charger>; + }; + }; + }; + }; + + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + flash@0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + hda@0,70030000 { + status = "okay"; + }; + + sdhci@0,700b0000 { /* WiFi/BT on this bus */ + status = "okay"; + power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-1-8-v; + non-removable; + }; + + sdhci@0,700b0400 { /* SD Card on this bus */ + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-1-8-v; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + sdhci@0,700b0600 { /* eMMC on this bus */ + status = "okay"; + bus-width = <8>; + no-1-8-v; + non-removable; + }; + + ahub@0,70300000 { + i2s@0,70301100 { + status = "okay"; + }; + }; + + usb@0,7d000000 { /* Rear external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d000000 { + status = "okay"; + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb@0,7d004000 { /* Internal webcam. */ + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + vbus-supply = <&vdd_run_cam>; + }; + + usb@0,7d008000 { /* Left external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_led>; + pwms = <&pwm 1 1000000>; + + default-brightness-level = <224>; + brightness-levels = + < 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255 + 256>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid { + label = "Lid"; + gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <5>; + linux,code = <KEY_RESERVED>; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + gpio-key,wakeup; + }; + }; + + panel: panel { + compatible = "auo,b133xtn01"; + + backlight = <&backlight>; + ddc-i2c-bus = <&dpaux>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "+VDD_LED"; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; + + vdd_5v0_ts: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "+5V_VDD_TS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_panel: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-max98090-nyan-big", + "nvidia,tegra-audio-max98090"; + nvidia,model = "Acer Chromebook 13"; + + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "DMICL", "Int Mic", + "DMICR", "Int Mic", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; + }; +}; + +#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 70ad91d..1300885 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -36,17 +36,17 @@ nvidia,panel = <&panel>; }; - dpaux: dpaux@0,545c0000 { + dpaux@0,545c0000 { vdd-supply = <&vdd_3v3_panel>; status = "okay"; }; }; pinmux: pinmux@0,70000868 { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_default>; + pinctrl-names = "boot"; + pinctrl-0 = <&pinmux_boot>; - pinmux_default: common { + pinmux_boot: common { dap_mclk1_pw4 { nvidia,pins = "dap_mclk1_pw4"; nvidia,function = "extperiph1"; @@ -587,7 +587,7 @@ status = "okay"; }; - pwm: pwm@0,7000a000 { + pwm@0,7000a000 { status = "okay"; }; @@ -606,6 +606,14 @@ i2c@0,7000c400 { status = "okay"; clock-frequency = <100000>; + + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>; + linux,gpio-keymap = <0 0 0 BTN_LEFT>; + }; }; i2c@0,7000c500 {
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 03916ef..478c555 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -12,6 +12,72 @@ #address-cells = <2>; #size-cells = <2>; + pcie-controller@0,01003000 { + compatible = "nvidia,tegra124-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA124_CLK_PCIE>, + <&tegra_car TEGRA124_CLK_AFI>, + <&tegra_car TEGRA124_CLK_PLL_E>, + <&tegra_car TEGRA124_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>; + phy-names = "pcie"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + host1x@0,50000000 { compatible = "nvidia,tegra124-host1x", "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; @@ -78,7 +144,7 @@ status = "disabled"; }; - dpaux@0,545c0000 { + dpaux: dpaux@0,545c0000 { compatible = "nvidia,tegra124-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -137,6 +203,11 @@ #reset-cells = <1>; }; + flow-controller@0,60007000 { + compatible = "nvidia,tegra124-flowctrl"; + reg = <0x0 0x60007000 0x0 0x1000>; + }; + gpio: gpio@0,6000d000 { compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; @@ -267,7 +338,7 @@ status = "disabled"; }; - pwm@0,7000a000 { + pwm: pwm@0,7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; #pwm-cells = <2>; @@ -480,6 +551,31 @@ reset-names = "fuse"; }; + sata@0,70020000 { + compatible = "nvidia,tegra124-ahci"; + + reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ + <0x0 0x70020000 0x0 0x7000>; /* SATA */ + + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_SATA>, + <&tegra_car TEGRA124_CLK_SATA_OOB>, + <&tegra_car TEGRA124_CLK_CML1>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "sata", "sata-oob", "cml1", "pll_e"; + + resets = <&tegra_car 124>, + <&tegra_car 123>, + <&tegra_car 129>; + reset-names = "sata", "sata-oob", "sata-cold"; + + phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; + phy-names = "sata-phy"; + + status = "disabled"; + }; + hda@0,70030000 { compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 1908f69..3b374c4 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -190,6 +190,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra20-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 6b35c29..aa6ccea 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -272,6 +272,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra30-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>;
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 756c986..2efb205 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -41,7 +41,7 @@ bank-width = <4>; }; - vram@2,00000000 { + v2m_video_ram: vram@2,00000000 { compatible = "arm,vexpress-vram"; reg = <2 0x00000000 0x00800000>; }; @@ -246,9 +246,41 @@ clcd@1f0000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + + port { + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; }; }; @@ -350,7 +382,7 @@ /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; + freq-range = <23750000 65000000>; #clock-cells = <0>; clock-output-names = "v2m:oscclk1"; };
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index ba856d6..cb3090f 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -40,7 +40,7 @@ bank-width = <4>; }; - vram@3,00000000 { + v2m_video_ram: vram@3,00000000 { compatible = "arm,vexpress-vram"; reg = <3 0x00000000 0x00800000>; }; @@ -245,9 +245,41 @@ clcd@1f000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; + interrupt-names = "combined"; interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + + port { + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; }; }; @@ -349,7 +381,7 @@ /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; + freq-range = <23750000 65000000>; #clock-cells = <0>; clock-output-names = "v2m:oscclk1"; };
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index a25c262..322fd15 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -38,6 +38,7 @@ compatible = "arm,cortex-a15"; reg = <0>; cci-control-port = <&cci_control1>; + cpu-idle-states = <&CLUSTER_SLEEP_BIG>; }; cpu1: cpu@1 { @@ -45,6 +46,7 @@ compatible = "arm,cortex-a15"; reg = <1>; cci-control-port = <&cci_control1>; + cpu-idle-states = <&CLUSTER_SLEEP_BIG>; }; cpu2: cpu@2 { @@ -52,6 +54,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; cci-control-port = <&cci_control2>; + cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; }; cpu3: cpu@3 { @@ -59,6 +62,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; cci-control-port = <&cci_control2>; + cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; }; cpu4: cpu@4 { @@ -66,6 +70,25 @@ compatible = "arm,cortex-a7"; reg = <0x102>; cci-control-port = <&cci_control2>; + cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; + }; + + idle-states { + CLUSTER_SLEEP_BIG: cluster-sleep-big { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2000>; + }; + + CLUSTER_SLEEP_LITTLE: cluster-sleep-little { + compatible = "arm,idle-state"; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <500>; + min-residency-us = <2500>; + }; }; };
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 62d9b22..23662b5 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -70,9 +70,40 @@ clcd@10020000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x10020000 0x1000>; + interrupt-names = "combined"; interrupts = <0 44 4>; clocks = <&oscclk1>, <&oscclk2>; clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; + }; }; memory-controller@100e0000 {
diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts new file mode 100644 index 0000000..7fb3066 --- /dev/null +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
@@ -0,0 +1,46 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610-colibri.dtsi" + +/ { + model = "Toradex Colibri VF61 on Colibri Evaluation Board"; + compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200"; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +};
diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts deleted file mode 100644 index aecc7db..0000000 --- a/arch/arm/boot/dts/vf610-colibri.dts +++ /dev/null
@@ -1,123 +0,0 @@ -/* - * Copyright 2014 Toradex AG - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/dts-v1/; -#include "vf610.dtsi" - -/ { - model = "Toradex Colibri VF61 COM"; - compatible = "toradex,vf610-colibri", "fsl,vf610"; - - chosen { - bootargs = "console=ttyLP0,115200"; - }; - - memory { - reg = <0x80000000 0x10000000>; - }; - - clocks { - enet_ext { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; - }; - -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <4>; - status = "okay"; -}; - -&fec1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; -}; - -&L2 { - arm,data-latency = <2 1 2>; - arm,tag-latency = <3 2 3>; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&iomuxc { - vf610-colibri { - pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTB20__GPIO_42 0x219d - >; - }; - - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; - - pinctrl_uart0: uart0grp { - fsl,pins = < - VF610_PAD_PTB10__UART0_TX 0x21a2 - VF610_PAD_PTB11__UART0_RX 0x21a1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB4__UART1_TX 0x21a2 - VF610_PAD_PTB5__UART1_RX 0x21a1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - VF610_PAD_PTD2__UART2_RTS 0x21a2 - VF610_PAD_PTD3__UART2_CTS 0x21a1 - >; - }; - }; -};
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi new file mode 100644 index 0000000..0cd8343 --- /dev/null +++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -0,0 +1,123 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "vf610.dtsi" + +/ { + model = "Toradex Colibri VF61 COM"; + compatible = "toradex,vf610-colibri_vf61", "fsl,vf610"; + + memory { + reg = <0x80000000 0x10000000>; + }; + + clocks { + enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; +}; + +&L2 { + arm,data-latency = <2 1 2>; + arm,tag-latency = <3 2 3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&iomuxc { + vf610-colibri { + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + }; +};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index b8a5e8c..189b697 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -76,7 +76,6 @@ simple-audio-card,cpu { sound-dai = <&sai2>; - master-clkdir-out; frame-master; bitclock-master; }; @@ -221,8 +220,6 @@ VF610_PAD_PTB1__FTM0_CH1 0x1582 VF610_PAD_PTB2__FTM0_CH2 0x1582 VF610_PAD_PTB3__FTM0_CH3 0x1582 - VF610_PAD_PTB6__FTM0_CH6 0x1582 - VF610_PAD_PTB7__FTM0_CH7 0x1582 >; }; @@ -244,6 +241,13 @@ VF610_PAD_PTB5__UART1_RX 0x21a1 >; }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTB6__UART2_TX 0x21a2 + VF610_PAD_PTB7__UART2_RX 0x21a1 + >; + }; }; }; @@ -265,3 +269,19 @@ pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 583dd36..4d2ec32 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi
@@ -27,6 +27,8 @@ gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + usbphy0 = &usbphy0; + usbphy1 = &usbphy1; }; cpus { @@ -297,9 +299,25 @@ gpio-ranges = <&iomuxc 0 128 7>; }; - anatop@40050000 { - compatible = "fsl,vf610-anatop"; - reg = <0x40050000 0x1000>; + anatop: anatop@40050000 { + compatible = "fsl,vf610-anatop", "syscon"; + reg = <0x40050000 0x400>; + }; + + usbphy0: usbphy@40050800 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050800 0x400>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBPHY0>; + fsl,anatop = <&anatop>; + }; + + usbphy1: usbphy@40050c00 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050c00 0x400>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBPHY1>; + fsl,anatop = <&anatop>; }; i2c0: i2c@40066000 { @@ -321,6 +339,24 @@ reg = <0x4006b000 0x1000>; #clock-cells = <1>; }; + + usbdev0: usb@40034000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x40034000 0x800>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBC0>; + fsl,usbphy = <&usbphy0>; + fsl,usbmisc = <&usbmisc0 0>; + dr_mode = "peripheral"; + status = "disabled"; + }; + + usbmisc0: usb@40034800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x40034800 0x200>; + clocks = <&clks VF610_CLK_USBC0>; + }; }; aips1: aips-bus@40080000 { @@ -383,6 +419,24 @@ status = "disabled"; }; + usbh1: usb@400b4000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x400b4000 0x800>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBC1>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + dr_mode = "host"; + status = "disabled"; + }; + + usbmisc1: usb@400b4800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x400b4800 0x200>; + clocks = <&clks VF610_CLK_USBC1>; + }; + ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 6cc83d4..ce2ef5b 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -30,7 +30,6 @@ /* kHz uV */ 666667 1000000 333334 1000000 - 222223 1000000 >; }; @@ -65,7 +64,7 @@ interrupt-parent = <&intc>; ranges; - adc@f8007100 { + adc: adc@f8007100 { compatible = "xlnx,zynq-xadc-1.00.a"; reg = <0xf8007100 0x20>; interrupts = <0 7 4>; @@ -137,7 +136,7 @@ <0xF8F00100 0x100>; }; - L2: cache-controller { + L2: cache-controller@f8f02000 { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; arm,data-latency = <3 2 2>; @@ -146,6 +145,11 @@ cache-level = <2>; }; + mc: memory-controller@f8006000 { + compatible = "xlnx,zynq-ddrc-a05"; + reg = <0xf8006000 0x1000>; + }; + uart0: serial@e0000000 { compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; @@ -190,20 +194,24 @@ gem0: ethernet@e000b000 { compatible = "cdns,gem"; - reg = <0xe000b000 0x4000>; + reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; gem1: ethernet@e000c000 { compatible = "cdns,gem"; - reg = <0xe000c000 0x4000>; + reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; sdhci0: sdhci@e0100000 { @@ -214,7 +222,7 @@ interrupt-parent = <&intc>; interrupts = <0 24 4>; reg = <0xe0100000 0x1000>; - } ; + }; sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; @@ -224,7 +232,7 @@ interrupt-parent = <&intc>; interrupts = <0 47 4>; reg = <0xe0101000 0x1000>; - } ; + }; slcr: slcr@f8000000 { #address-cells = <1>; @@ -256,6 +264,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0xf8003000 0x1000>; interrupt-parent = <&intc>; + interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7"; interrupts = <0 13 4>, <0 14 4>, <0 15 4>, <0 16 4>, <0 17 4>, @@ -271,7 +281,7 @@ devcfg: devcfg@f8007000 { compatible = "xlnx,zynq-devcfg-1.0"; reg = <0xf8007000 0x100>; - } ; + }; global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; @@ -303,6 +313,17 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; - } ; + }; + + watchdog0: watchdog@f8005000 { + clocks = <&clkc 45>; + compatible = "xlnx,zynq-wdt-r1p2"; + device_type = "watchdog"; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + reset = <0>; + timeout-sec = <10>; + }; }; };
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 41afd9d..e1f51ca 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -25,7 +25,7 @@ memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -38,8 +38,6 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; - #address-cells = <1>; - #size-cells = <0>; ethernet_phy: ethernet-phy@0 { /* Marvell 88E1318 */ @@ -53,6 +51,29 @@ &i2c0 { status = "okay"; + + isl9305: isl9305@68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + dcd2 { + regulator-name = "1P35V"; + regulator-always-on; + }; + ldo1 { + regulator-name = "VDD_ADJ"; + }; + ldo2 { + regulator-name = "VDD_GPIO"; + regulator-always-on; + }; + }; + }; }; &sdhci1 {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 835c308..94e2cda 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. * * This software is licensed under the terms of the GNU General Public @@ -27,6 +27,15 @@ bootargs = "console=ttyPS0,115200 earlyprintk"; }; + leds { + compatible = "gpio-leds"; + + ds23 { + label = "ds23"; + gpios = <&gpio0 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; }; &can0 { @@ -35,7 +44,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; }; &i2c0 {
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 4cc9913..a8bbdfb 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -1,7 +1,6 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * Copyright (C) 2013 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -21,7 +20,7 @@ memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -32,7 +31,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; }; &i2c0 {
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 82d7ef1..697779a 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -1,7 +1,6 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * Copyright (C) 2013 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -17,11 +16,11 @@ / { model = "Zynq Zed Development Board"; - compatible = "xlnx,zynq-7000"; + compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; memory { device_type = "memory"; - reg = <0 0x20000000>; + reg = <0x0 0x20000000>; }; chosen { @@ -32,7 +31,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; }; &sdhci0 {
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index a20fa80..45f4c21 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c
@@ -243,18 +243,12 @@ static int scoop_remove(struct platform_device *pdev) { struct scoop_dev *sdev = platform_get_drvdata(pdev); - int ret; if (!sdev) return -EINVAL; - if (sdev->gpio.base != -1) { - ret = gpiochip_remove(&sdev->gpio); - if (ret) { - dev_err(&pdev->dev, "Can't remove gpio chip: %d\n", ret); - return ret; - } - } + if (sdev->gpio.base != -1) + gpiochip_remove(&sdev->gpio); platform_set_drvdata(pdev, NULL); iounmap(sdev->base);
diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig index bb396c0..b54b28f 100644 --- a/arch/arm/configs/ape6evm_defconfig +++ b/arch/arm/configs/ape6evm_defconfig
@@ -12,7 +12,6 @@ CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y CONFIG_SLAB=y -# CONFIG_BLOCK is not set CONFIG_ARCH_SHMOBILE_LEGACY=y CONFIG_ARCH_R8A73A4=y CONFIG_MACH_APE6EVM=y @@ -64,6 +63,8 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=12 CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_SH_MOBILE=y CONFIG_GPIO_SH_PFC=y CONFIG_GPIOLIB=y # CONFIG_HWMON is not set @@ -72,11 +73,17 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8973=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y # CONFIG_IOMMU_SUPPORT is not set # CONFIG_DNOTIFY is not set CONFIG_TMPFS=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 300ded9..3b515c1 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig
@@ -18,15 +18,14 @@ CONFIG_SOC_AT91SAM9260=y CONFIG_SOC_AT91SAM9261=y CONFIG_SOC_AT91SAM9263=y +CONFIG_SOC_AT91SAM9RL=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y CONFIG_SOC_AT91SAM9N12=y -CONFIG_SOC_AT91SAM9RL=y CONFIG_MACH_AT91RM9200_DT=y CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -63,23 +62,20 @@ # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_MACB=y @@ -105,9 +101,8 @@ CONFIG_RT2800USB_RT53XX=y CONFIG_RT2800USB_RT55XX=y CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RTLWIFI=m -# CONFIG_RTLWIFI_DEBUG is not set CONFIG_RTL8192CU=m +# CONFIG_RTLWIFI_DEBUG is not set CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_MWIFIEX_USB=m @@ -128,9 +123,12 @@ CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C=y +CONFIG_I2C_AT91=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y @@ -144,11 +142,14 @@ # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_ACORN_8x8=y -CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_ATMEL_SOC=y +CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y +CONFIG_SND_ATMEL_SOC_WM8904=y +CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=y @@ -169,6 +170,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -178,7 +180,12 @@ CONFIG_RTC_DRV_AT91RM9200=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y +CONFIG_AT_HDMAC=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_AT91_ADC=y +CONFIG_PWM=y +CONFIG_PWM_ATMEL=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y @@ -209,3 +216,7 @@ CONFIG_CRC_ITU_T=y CONFIG_CRC7=m CONFIG_AVERAGE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_ACORN_8x8=y +CONFIG_FONT_MINI_4x6=y
diff --git a/arch/arm/configs/at91sam9260_9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig index c4c160f..3ada05d 100644 --- a/arch/arm/configs/at91sam9260_9g20_defconfig +++ b/arch/arm/configs/at91sam9260_9g20_defconfig
@@ -54,7 +54,6 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y @@ -66,13 +65,10 @@ CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_MII=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set @@ -86,7 +82,6 @@ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -97,6 +92,8 @@ CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -127,6 +124,8 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y @@ -139,10 +138,8 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_LL=y -CONFIG_AT91_DEBUG_LL_DBGU0=y CONFIG_EARLY_PRINTK=y
diff --git a/arch/arm/configs/at91sam9261_9g10_defconfig b/arch/arm/configs/at91sam9261_9g10_defconfig index f80e993..0c505d8 100644 --- a/arch/arm/configs/at91sam9261_9g10_defconfig +++ b/arch/arm/configs/at91sam9261_9g10_defconfig
@@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set @@ -20,7 +19,6 @@ CONFIG_MACH_AT91SAM9G10EK=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" @@ -55,7 +53,6 @@ CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_DM9000=y CONFIG_USB_ZD1201=m @@ -87,6 +84,8 @@ CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index e4002636..8b671c9 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig
@@ -18,7 +18,6 @@ CONFIG_MTD_AT91_DATAFLASH_CARD=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" @@ -51,7 +50,6 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_NFTL=y CONFIG_NFTL_RW=y @@ -64,13 +62,10 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_MII=y CONFIG_MACB=y CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set @@ -92,6 +87,8 @@ CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -103,7 +100,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FONTS=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -129,12 +125,14 @@ CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y -CONFIG_LEDS_ATMEL_PWM=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_PWM=y +CONFIG_PWM_ATMEL=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y @@ -150,3 +148,4 @@ CONFIG_NLS_UTF8=y CONFIG_DEBUG_USER=y CONFIG_XZ_DEC=y +CONFIG_FONTS=y
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index c6661a6..f66d1a1 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -20,7 +20,6 @@ CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -51,7 +50,6 @@ # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y @@ -62,15 +60,12 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_MII=y CONFIG_MACB=y CONFIG_DAVICOM_PHY=y # CONFIG_INPUT_MOUSEDEV is not set @@ -93,18 +88,22 @@ CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_ATMEL_LCDC=y -CONFIG_BACKLIGHT_ATMEL_PWM=y # CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FONTS=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -135,6 +134,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -147,6 +147,8 @@ # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y +CONFIG_PWM=y +CONFIG_PWM_ATMEL=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y @@ -159,8 +161,8 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_STRIP_ASM_SYMS=y -# CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y @@ -170,3 +172,4 @@ CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set +CONFIG_FONTS=y
diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 5d7797d..4c26d34 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -2,8 +2,8 @@ # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -37,7 +37,6 @@ CONFIG_BLK_DEV_RAM_SIZE=24576 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 @@ -54,20 +53,31 @@ CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y +CONFIG_USB_GADGET=y +CONFIG_USB_ATMEL_USBA=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_IIO=y CONFIG_AT91_ADC=y -CONFIG_EXT2_FS=y -CONFIG_MSDOS_FS=y +CONFIG_PWM=y +CONFIG_PWM_ATMEL=y +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_UBIFS_FS=y @@ -77,7 +87,6 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 0302d29..31cb073 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig
@@ -98,6 +98,7 @@ CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_STAGING=y CONFIG_USB_DWC2=y +CONFIG_USB_DWC2_HOST=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index fbebcbc..bc614f4 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig
@@ -83,7 +83,6 @@ CONFIG_MFD_BCM590XX=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y CONFIG_REGULATOR_BCM590XX=y
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index e816140..1dde5da 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig
@@ -29,7 +29,6 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_SUSPEND is not set CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y @@ -55,6 +54,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y @@ -82,6 +82,7 @@ # CONFIG_HWMON is not set CONFIG_I2C=y CONFIG_I2C_RCAR=y +CONFIG_GPIO_RCAR=y CONFIG_REGULATOR=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig index 0facf9d..fc105c9 100644 --- a/arch/arm/configs/clps711x_defconfig +++ b/arch/arm/configs/clps711x_defconfig
@@ -68,8 +68,8 @@ # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_CLPS711X=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_PWM=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -77,6 +77,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_PWM=y +CONFIG_PWM_CLPS711X=y CONFIG_EXT2_FS=y CONFIG_CRAMFS=y CONFIG_MINIX_FS=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 1b650c8..72233b9 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig
@@ -107,5 +107,6 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_PL01X=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index fc7d168..72058b8 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig
@@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y @@ -54,12 +55,14 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_GADGET=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_CROS_EC=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y @@ -68,15 +71,18 @@ CONFIG_TCG_TPM=y CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_I2C_EXYNOS5=y +CONFIG_I2C_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y CONFIG_SPI_S3C64XX=y CONFIG_I2C_S3C2410=y CONFIG_DEBUG_GPIO=y CONFIG_POWER_SUPPLY=y +CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y # CONFIG_HWMON is not set CONFIG_THERMAL=y @@ -88,6 +94,7 @@ CONFIG_MFD_CROS_EC_I2C=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8997=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y @@ -96,6 +103,8 @@ CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8997=y CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_MAX77802=y +CONFIG_REGULATOR_MAX77693=y CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y @@ -115,6 +124,7 @@ CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_SNOW=y CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_EXYNOS=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index d95763d..eb440aa 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig
@@ -230,7 +230,6 @@ CONFIG_EZX_PCAP=y CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y -CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y CONFIG_REGULATOR_PCAP=y CONFIG_MEDIA_SUPPORT=y
diff --git a/arch/arm/configs/hi3xxx_defconfig b/arch/arm/configs/hi3xxx_defconfig deleted file mode 100644 index 9630687..0000000 --- a/arch/arm/configs/hi3xxx_defconfig +++ /dev/null
@@ -1,58 +0,0 @@ -CONFIG_IRQ_DOMAIN_DEBUG=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_RD_LZMA=y -CONFIG_ARCH_HISI=y -CONFIG_ARCH_HI3xxx=y -CONFIG_ARCH_HIX5HD2=y -CONFIG_SMP=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_I2C_DESIGNWARE_PLATFORM=y -CONFIG_SPI=y -CONFIG_SPI_PL022=y -CONFIG_PINCTRL_SINGLE=y -CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_REGULATOR_GPIO=y -CONFIG_DRM=y -CONFIG_FB_SIMPLE=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MXC=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_STORAGE=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_PL031=y -CONFIG_DMADEVICES=y -CONFIG_DW_DMAC=y -CONFIG_PL330_DMA=y -CONFIG_PWM=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_LOCKUP_DETECTOR=y
diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig new file mode 100644 index 0000000..1772505 --- /dev/null +++ b/arch/arm/configs/hisi_defconfig
@@ -0,0 +1,71 @@ +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_RD_LZMA=y +CONFIG_ARCH_HISI=y +CONFIG_ARCH_HI3xxx=y +CONFIG_ARCH_HIX5HD2=y +CONFIG_ARCH_HIP04=y +CONFIG_SMP=y +CONFIG_NR_CPUS=16 +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_REGULATOR_GPIO=y +CONFIG_DRM=y +CONFIG_FB_SIMPLE=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_MMC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_PL330_DMA=y +CONFIG_PWM=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_VFP=y +CONFIG_VFPv3=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index fd996bb..182e546 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig
@@ -208,7 +208,6 @@ CONFIG_PMIC_DA903X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y -CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y CONFIG_REGULATOR_DA903X=y CONFIG_MEDIA_SUPPORT=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 63bde0e..e688741 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -21,8 +21,6 @@ CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MXC=y -CONFIG_MXC_IRQ_PRIOR=y -CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y @@ -30,10 +28,6 @@ CONFIG_MACH_EUKREA_CPUIMX25SD=y CONFIG_MACH_IMX25_DT=y CONFIG_MACH_MX27ADS=y -CONFIG_MACH_PCM038=y -CONFIG_MACH_CPUIMX27=y -CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y -CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y @@ -43,8 +37,6 @@ CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y CONFIG_PM_DEBUG=y CONFIG_NET=y CONFIG_PACKET=y @@ -63,6 +55,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_IMX_WEIM=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -78,8 +71,8 @@ CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y -CONFIG_ATA=y CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y CONFIG_CS89x0=y @@ -102,10 +95,8 @@ CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y -CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y @@ -132,10 +123,7 @@ CONFIG_SOC_CAMERA_OV2640=y CONFIG_FB=y CONFIG_FB_IMX=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 16cfec4..8fca6e2 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,8 +32,8 @@ CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y -CONFIG_SOC_IMX51=y CONFIG_SOC_IMX50=y +CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y @@ -105,7 +105,6 @@ CONFIG_EEPROM_AT25=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y @@ -153,14 +152,12 @@ CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MXC_RNGA=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y # CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m CONFIG_I2C_IMX=y -CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y @@ -198,7 +195,6 @@ CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y CONFIG_LCD_PLATFORM=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_GPIO=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -206,6 +202,7 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_FSL_SAI=y CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y @@ -213,6 +210,7 @@ CONFIG_SND_SOC_IMX_SGTL5000=y CONFIG_SND_SOC_IMX_SPDIF=y CONFIG_SND_SOC_IMX_MC13783=y +CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y @@ -240,6 +238,7 @@ CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_ISL1208=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y @@ -254,7 +253,6 @@ CONFIG_DRM_IMX_PARALLEL_DISPLAY=y CONFIG_DRM_IMX_TVE=y CONFIG_DRM_IMX_LDB=y -CONFIG_DRM_IMX_IPUV3_CORE=y CONFIG_DRM_IMX_IPUV3=y CONFIG_DRM_IMX_HDMI=y # CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig index 86faab5..b33d19b 100644 --- a/arch/arm/configs/koelsch_defconfig +++ b/arch/arm/configs/koelsch_defconfig
@@ -15,6 +15,9 @@ CONFIG_CPU_BPREDICT_DISABLE=y CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_754322=y +CONFIG_PCI=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_SMP=y CONFIG_SCHED_MC=y CONFIG_NR_CPUS=8 @@ -42,6 +45,8 @@ CONFIG_SATA_RCAR=y CONFIG_MTD=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y +CONFIG_EEPROM_AT24=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_CADENCE is not set @@ -66,9 +71,12 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=20 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_RCAR=y CONFIG_SPI=y CONFIG_SPI_RSPI=y +CONFIG_SPI_SH_MSIOF=y CONFIG_GPIOLIB=y CONFIG_GPIO_RCAR=y # CONFIG_HWMON is not set @@ -76,7 +84,16 @@ CONFIG_RCAR_THERMAL=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_PLATFORM=y +CONFIG_VIDEO_RCAR_VIN=y +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_ADV7180=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index bd097d4..8cb115d 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig
@@ -119,6 +119,7 @@ CONFIG_MMC_SH_MMCIF=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RS5C372=y CONFIG_DMADEVICES=y
diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig index 5870244..929c571 100644 --- a/arch/arm/configs/lager_defconfig +++ b/arch/arm/configs/lager_defconfig
@@ -22,6 +22,9 @@ CONFIG_ARM_ERRATA_460075=y CONFIG_ARM_ERRATA_743622=y CONFIG_ARM_ERRATA_754322=y +CONFIG_PCI=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set @@ -53,6 +56,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_RCAR=y @@ -85,11 +89,12 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=10 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_I2C=y CONFIG_I2C_GPIO=y +CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_RCAR=y CONFIG_SPI=y CONFIG_SPI_RSPI=y +CONFIG_SPI_SH_MSIOF=y CONFIG_GPIO_SH_PFC=y CONFIG_GPIOLIB=y CONFIG_GPIO_RCAR=y @@ -98,6 +103,7 @@ CONFIG_RCAR_THERMAL=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 398a367..9f56ca3 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig
@@ -59,6 +59,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_SLC_LPC32XX=y CONFIG_MTD_NAND_MLC_LPC32XX=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y @@ -189,6 +190,7 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_UBIFS_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 92994f7..ff91630 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig
@@ -84,6 +84,7 @@ CONFIG_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_SSB=y +CONFIG_REGULATOR=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 5fb95fb..f1dc7fc 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig
@@ -28,7 +28,9 @@ CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y CONFIG_ARCH_HIX5HD2=y +CONFIG_ARCH_HIP04=y CONFIG_ARCH_KEYSTONE=y +CONFIG_ARCH_MESON=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y @@ -42,6 +44,7 @@ CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARCH_QCOM=y +CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y @@ -74,6 +77,7 @@ CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y +CONFIG_PCIEPORTBUS=y CONFIG_SMP=y CONFIG_NR_CPUS=8 CONFIG_HIGHPTE=y @@ -86,6 +90,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_NEON=y +CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -106,6 +111,7 @@ CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_DEV=y +CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y CONFIG_CFG80211=m CONFIG_MAC80211=m @@ -119,7 +125,10 @@ CONFIG_OMAP_OCP2SCP=y CONFIG_MTD=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y +CONFIG_AD525X_DPOT=y +CONFIG_AD525X_DPOT_I2C=y CONFIG_ICS932S401=y CONFIG_APDS9802ALS=y CONFIG_ISL29003=y @@ -129,9 +138,11 @@ CONFIG_BLK_DEV_SR=y CONFIG_SCSI_MULTI_LUN=y CONFIG_ATA=y +CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y CONFIG_AHCI_ST=y CONFIG_AHCI_SUNXI=y +CONFIG_AHCI_TEGRA=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y @@ -146,6 +157,7 @@ CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_TI_CPSW=y +CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=y CONFIG_ICPLUS_PHY=y @@ -156,6 +168,7 @@ CONFIG_BRCMFMAC=m CONFIG_RT2X00=m CONFIG_RT2800USB=m +CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y @@ -164,6 +177,7 @@ CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_STMPE=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y @@ -173,6 +187,8 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_SIRFSOC=y @@ -205,6 +221,8 @@ CONFIG_I2C_TEGRA=y CONFIG_I2C_ST=y CONFIG_SPI=y +CONFIG_I2C_XILINX=y +CONFIG_SPI_CADENCE=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y @@ -214,11 +232,14 @@ CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y +CONFIG_SPI_XILINX=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_XILINX=y +CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_TWL4030=y @@ -237,8 +258,10 @@ CONFIG_ST_THERMAL_SYSCFG=y CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y +CONFIG_XILINX_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y +CONFIG_MESON_WATCHDOG=y CONFIG_MFD_AS3722=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_CROS_EC=y @@ -250,7 +273,6 @@ CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y -CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_BCM590XX=y @@ -281,6 +303,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y @@ -331,9 +354,21 @@ CONFIG_MMC_SUNXI=y CONFIG_MMC_DW=y CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_ROCKCHIP=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=y +CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y @@ -349,6 +384,7 @@ CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y +CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_TEGRA=y @@ -364,6 +400,7 @@ CONFIG_IMX_DMA=y CONFIG_MXS_DMA=y CONFIG_DMA_OMAP=y +CONFIG_XILINX_VDMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y @@ -371,6 +408,7 @@ CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y +CONFIG_NVEC_PAZ00=y CONFIG_QCOM_GSBI=y CONFIG_COMMON_CLK_QCOM=y CONFIG_MSM_GCC_8660=y @@ -380,6 +418,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_MEMORY=y CONFIG_IIO=y +CONFIG_XILINX_XADC=y CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_TEGRA=y @@ -403,3 +442,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_LOCKUP_DETECTOR=y CONFIG_CRYPTO_DEV_TEGRA_AES=y +CONFIG_GENERIC_CPUFREQ_CPU0=y
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index fdfda1f..ed0a0d1 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_FHANDLE=y CONFIG_IRQ_DOMAIN_DEBUG=y @@ -15,9 +14,6 @@ CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y -CONFIG_NEON=y -# CONFIG_CACHE_L2X0 is not set -# CONFIG_SWP_EMULATE is not set CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y @@ -29,12 +25,14 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CPU_FREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_MVEBU_V7_CPUIDLE=y -CONFIG_CPU_FREQ=y -CONFIG_CPUFREQ_GENERIC=y CONFIG_VFP=y +CONFIG_NEON=y CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y @@ -44,11 +42,24 @@ CONFIG_BT_MRVL_SDIO=y CONFIG_CFG80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_PXA3xx=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_AHCI_MVEBU=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y +CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_MVPP2=y CONFIG_MARVELL_PHY=y @@ -58,47 +69,36 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y +CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y -CONFIG_I2C_MV64XXX=y -CONFIG_MTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_PXA3xx=y -CONFIG_SERIAL_8250_DW=y -CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +CONFIG_SENSORS_GPIO_FAN=y CONFIG_THERMAL=y CONFIG_ARMADA_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_ORION_WATCHDOG=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=y -CONFIG_WATCHDOG=y -CONFIG_ORION_WATCHDOG=y -CONFIG_USB_SUPPORT=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_MVEBU=y CONFIG_MMC=y -CONFIG_MMC_SDHCI_PXAV3=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_MVSDIO=y -CONFIG_NEW_LEDS=y CONFIG_LEDS_GPIO=y -CONFIG_LEDS_CLASS=m +CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -107,12 +107,9 @@ CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y CONFIG_MV_XOR=y -CONFIG_MEMORY=y -CONFIG_MVEBU_DEVBUS=y # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set +CONFIG_MEMORY=y +CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -126,10 +123,11 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index f650f00..16e719c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig
@@ -1,11 +1,28 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CGROUPS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_KMEM=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_SCHED=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_BLK_CGROUP=y +CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_SLAB=y @@ -32,19 +49,27 @@ CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y -CONFIG_CACHE_L2X0=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y +CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_CMA=y +CONFIG_SECCOMP=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_GENERIC_CPUFREQ_CPU0=y +# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set CONFIG_CPU_IDLE=y CONFIG_BINFMT_MISC=y CONFIG_PM_DEBUG=y @@ -61,7 +86,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y CONFIG_NETFILTER=y CONFIG_CAN=m CONFIG_CAN_C_CAN=m @@ -75,9 +100,6 @@ CONFIG_BT_HCIBPA10X=m CONFIG_CFG80211=m CONFIG_MAC80211=m -CONFIG_MAC80211_RC_PID=y -CONFIG_MAC80211_RC_DEFAULT_PID=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y @@ -101,9 +123,9 @@ CONFIG_SENSORS_TSL2550=m CONFIG_BMP085_I2C=m CONFIG_SENSORS_LIS3_I2C=m +CONFIG_SRAM=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_MD=y CONFIG_NETDEVICES=y @@ -138,7 +160,9 @@ CONFIG_KEYBOARD_MATRIX=m CONFIG_KEYBOARD_TWL4030=y CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_TSC2005=m +CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y # CONFIG_LEGACY_PTYS is not set @@ -162,7 +186,13 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=y -CONFIG_POWER_SUPPLY=y +CONFIG_BATTERY_BQ27x00=m +CONFIG_CHARGER_ISP1704=m +CONFIG_CHARGER_TWL4030=m +CONFIG_CHARGER_BQ2415X=m +CONFIG_CHARGER_BQ24190=m +CONFIG_CHARGER_BQ24735=m +CONFIG_POWER_RESET=y CONFIG_POWER_AVS=y CONFIG_SENSORS_LM75=m CONFIG_THERMAL=y @@ -183,8 +213,8 @@ CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TI_ABB=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -192,12 +222,12 @@ CONFIG_REGULATOR_TPS65218=y CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y -CONFIG_REGULATOR_PBIAS=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_OMAP2_DSS=m +CONFIG_OMAP5_DSS_HDMI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m @@ -205,11 +235,25 @@ CONFIG_DISPLAY_ENCODER_TPD12S015=m CONFIG_DISPLAY_CONNECTOR_DVI=m CONFIG_DISPLAY_CONNECTOR_HDMI=m +CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m CONFIG_DISPLAY_PANEL_DPI=m +CONFIG_DISPLAY_PANEL_DSI_CM=m +CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m +CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m +CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m +CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m +CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m +CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_PWM=m +CONFIG_BACKLIGHT_PANDORA=m +CONFIG_BACKLIGHT_GPIO=m CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y CONFIG_SOUND=m @@ -221,8 +265,6 @@ CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_OMAP_SOC=m -CONFIG_SND_AM33XX_SOC_EVM=m -CONFIG_SND_DAVINCI_SOC=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m @@ -233,9 +275,6 @@ CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=m CONFIG_USB_TEST=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_OMAP_USB2=y -CONFIG_TI_PIPE3=y CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y @@ -243,7 +282,6 @@ CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_ZERO=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y @@ -267,15 +305,23 @@ CONFIG_DMA_OMAP=y CONFIG_EXTCON=y CONFIG_EXTCON_PALMAS=y +CONFIG_PWM=y +CONFIG_PWM_TWL=y +CONFIG_PWM_TWL_LED=y +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=y +CONFIG_FANOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y +CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 60e3138..5f337d7 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig
@@ -77,7 +77,6 @@ CONFIG_PMIC_DA903X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y -CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_DA903X=y CONFIG_FB=y CONFIG_FB_PXA=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 42ebd72..8c7da33 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig
@@ -29,6 +29,7 @@ CONFIG_CLEANCACHE=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -53,14 +54,13 @@ CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y -CONFIG_SCSI_TGT=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y @@ -86,7 +86,6 @@ CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MSM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_QUP=y @@ -94,7 +93,9 @@ CONFIG_SPI_QUP=y CONFIG_SPMI=y CONFIG_PINCTRL_APQ8064=y +CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y +CONFIG_PINCTRL_MSM8960=y CONFIG_PINCTRL_MSM8X74=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y @@ -103,6 +104,7 @@ CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_MEDIA_SUPPORT=y CONFIG_FB=y CONFIG_SOUND=y @@ -124,6 +126,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=500 CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_MSM=y @@ -133,11 +136,14 @@ CONFIG_STAGING=y CONFIG_QCOM_GSBI=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_APQ_MMCC_8084=y +CONFIG_IPQ_GCC_806X=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_MSM_IOMMU=y -CONFIG_GENERIC_PHY=y +CONFIG_PHY_QCOM_APQ8064_SATA=y +CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 4414990..c9089c9 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig
@@ -19,9 +19,9 @@ CONFIG_ARCH_AT91=y CONFIG_SOC_SAM_V7=y CONFIG_SOC_SAMA5D3=y +CONFIG_SOC_SAMA5D4=y CONFIG_MACH_SAMA5_DT=y CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -65,15 +65,14 @@ # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -83,10 +82,8 @@ CONFIG_EEPROM_AT24=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_MII=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set @@ -135,6 +132,8 @@ CONFIG_SPI_ATMEL=y CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_SSB=m CONFIG_REGULATOR=y @@ -145,6 +144,11 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_ATMEL_SOC=y +CONFIG_SND_ATMEL_SOC_WM8904=y # CONFIG_HID_GENERIC is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -165,6 +169,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y @@ -174,6 +179,8 @@ # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y +CONFIG_PWM=y +CONFIG_PWM_ATMEL=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y @@ -188,8 +195,8 @@ CONFIG_NLS_UTF8=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y -# CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 3b13614..d7346ad 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig
@@ -3,6 +3,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y @@ -11,9 +12,11 @@ CONFIG_ARCH_SHMOBILE_MULTI=y CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R8A7740=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7794=y CONFIG_MACH_KOELSCH=y CONFIG_MACH_LAGER=y CONFIG_MACH_MARZEN=y @@ -49,6 +52,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y @@ -73,6 +77,8 @@ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ST1232=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -82,6 +88,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=20 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_I2C_GPIO=y +CONFIG_I2C_RIIC=y CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_RCAR=y CONFIG_SPI=y @@ -110,10 +117,16 @@ CONFIG_VIDEO_ADV7180=y CONFIG_DRM=y CONFIG_DRM_RCAR_DU=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_SH4_FSI=y CONFIG_SND_SOC_RCAR=y +CONFIG_SND_SOC_WM8978=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y @@ -130,9 +143,12 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_S35390A=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_PWM=y +CONFIG_PWM_RENESAS_TPU=y # CONFIG_DNOTIFY is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 7209bfd..f7ac037 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig
@@ -75,7 +75,8 @@ CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AXP20X=y -CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y @@ -93,6 +94,7 @@ CONFIG_RTC_CLASS=y # CONFIG_RTC_INTF_SYSFS is not set # CONFIG_RTC_INTF_PROC is not set +CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_PHY_SUN4I_USB=y @@ -103,5 +105,7 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 285c433..888fc15 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig
@@ -102,6 +102,9 @@ CONFIG_BLK_DEV_SR=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_AHCI_TEGRA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_IGB=y @@ -120,6 +123,7 @@ CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_STMPE=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y @@ -165,7 +169,6 @@ CONFIG_MFD_TPS65910=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index d52b4ff..ea49d37 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig
@@ -82,5 +82,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_PL01X=y CONFIG_FONTS=y CONFIG_FONT_ACORN_8x8=y
diff --git a/arch/arm/crypto/sha1-armv7-neon.S b/arch/arm/crypto/sha1-armv7-neon.S index 50013c0..dcd01f3 100644 --- a/arch/arm/crypto/sha1-armv7-neon.S +++ b/arch/arm/crypto/sha1-armv7-neon.S
@@ -9,7 +9,7 @@ */ #include <linux/linkage.h> - +#include <asm/assembler.h> .syntax unified .code 32 @@ -61,13 +61,13 @@ #define RT3 r12 #define W0 q0 -#define W1 q1 +#define W1 q7 #define W2 q2 #define W3 q3 #define W4 q4 -#define W5 q5 -#define W6 q6 -#define W7 q7 +#define W5 q6 +#define W6 q5 +#define W7 q1 #define tmp0 q8 #define tmp1 q9 @@ -79,6 +79,11 @@ #define qK3 q14 #define qK4 q15 +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ARM_LE(code...) +#else +#define ARM_LE(code...) code +#endif /* Round function macros. */ @@ -150,45 +155,45 @@ #define W_PRECALC_00_15() \ add RWK, sp, #(WK_offs(0)); \ \ - vld1.32 {tmp0, tmp1}, [RDATA]!; \ - vrev32.8 W0, tmp0; /* big => little */ \ - vld1.32 {tmp2, tmp3}, [RDATA]!; \ + vld1.32 {W0, W7}, [RDATA]!; \ + ARM_LE(vrev32.8 W0, W0; ) /* big => little */ \ + vld1.32 {W6, W5}, [RDATA]!; \ vadd.u32 tmp0, W0, curK; \ - vrev32.8 W7, tmp1; /* big => little */ \ - vrev32.8 W6, tmp2; /* big => little */ \ + ARM_LE(vrev32.8 W7, W7; ) /* big => little */ \ + ARM_LE(vrev32.8 W6, W6; ) /* big => little */ \ vadd.u32 tmp1, W7, curK; \ - vrev32.8 W5, tmp3; /* big => little */ \ + ARM_LE(vrev32.8 W5, W5; ) /* big => little */ \ vadd.u32 tmp2, W6, curK; \ vst1.32 {tmp0, tmp1}, [RWK]!; \ vadd.u32 tmp3, W5, curK; \ vst1.32 {tmp2, tmp3}, [RWK]; \ #define WPRECALC_00_15_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ - vld1.32 {tmp0, tmp1}, [RDATA]!; \ + vld1.32 {W0, W7}, [RDATA]!; \ #define WPRECALC_00_15_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ add RWK, sp, #(WK_offs(0)); \ #define WPRECALC_00_15_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ - vrev32.8 W0, tmp0; /* big => little */ \ + ARM_LE(vrev32.8 W0, W0; ) /* big => little */ \ #define WPRECALC_00_15_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ - vld1.32 {tmp2, tmp3}, [RDATA]!; \ + vld1.32 {W6, W5}, [RDATA]!; \ #define WPRECALC_00_15_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ vadd.u32 tmp0, W0, curK; \ #define WPRECALC_00_15_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ - vrev32.8 W7, tmp1; /* big => little */ \ + ARM_LE(vrev32.8 W7, W7; ) /* big => little */ \ #define WPRECALC_00_15_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ - vrev32.8 W6, tmp2; /* big => little */ \ + ARM_LE(vrev32.8 W6, W6; ) /* big => little */ \ #define WPRECALC_00_15_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ vadd.u32 tmp1, W7, curK; \ #define WPRECALC_00_15_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ - vrev32.8 W5, tmp3; /* big => little */ \ + ARM_LE(vrev32.8 W5, W5; ) /* big => little */ \ #define WPRECALC_00_15_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ vadd.u32 tmp2, W6, curK; \
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 0704e0c..92793ba 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h
@@ -99,31 +99,6 @@ asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl)); } -static inline void arch_counter_set_user_access(void) -{ - u32 cntkctl = arch_timer_get_cntkctl(); - - /* Disable user access to both physical/virtual counters/timers */ - /* Also disable virtual event stream */ - cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN - | ARCH_TIMER_USR_VT_ACCESS_EN - | ARCH_TIMER_VIRT_EVT_EN - | ARCH_TIMER_USR_VCT_ACCESS_EN - | ARCH_TIMER_USR_PCT_ACCESS_EN); - arch_timer_set_cntkctl(cntkctl); -} - -static inline void arch_timer_evtstrm_enable(int divider) -{ - u32 cntkctl = arch_timer_get_cntkctl(); - cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK; - /* Set the divider and enable virtual event stream */ - cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT) - | ARCH_TIMER_VIRT_EVT_EN; - arch_timer_set_cntkctl(cntkctl); - elf_hwcap |= HWCAP_EVTSTRM; -} - #endif #endif
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 3040359..e22c119 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h
@@ -27,7 +27,7 @@ * strex/ldrex monitor on some implementations. The reason we can use it for * atomic_set() is the clrex or dummy strex done on every exception return. */ -#define atomic_read(v) (*(volatile int *)&(v)->counter) +#define atomic_read(v) ACCESS_ONCE((v)->counter) #define atomic_set(v,i) (((v)->counter) = (i)) #if __LINUX_ARM_ARCH__ >= 6 @@ -37,84 +37,47 @@ * store exclusive to ensure that these are atomic. We may loop * to ensure that the update happens. */ -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - prefetchw(&v->counter); - __asm__ __volatile__("@ atomic_add\n" -"1: ldrex %0, [%3]\n" -" add %0, %0, %4\n" -" strex %1, %0, [%3]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) - : "r" (&v->counter), "Ir" (i) - : "cc"); -} +#define ATOMIC_OP(op, c_op, asm_op) \ +static inline void atomic_##op(int i, atomic_t *v) \ +{ \ + unsigned long tmp; \ + int result; \ + \ + prefetchw(&v->counter); \ + __asm__ __volatile__("@ atomic_" #op "\n" \ +"1: ldrex %0, [%3]\n" \ +" " #asm_op " %0, %0, %4\n" \ +" strex %1, %0, [%3]\n" \ +" teq %1, #0\n" \ +" bne 1b" \ + : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) \ + : "r" (&v->counter), "Ir" (i) \ + : "cc"); \ +} \ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - - smp_mb(); - prefetchw(&v->counter); - - __asm__ __volatile__("@ atomic_add_return\n" -"1: ldrex %0, [%3]\n" -" add %0, %0, %4\n" -" strex %1, %0, [%3]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) - : "r" (&v->counter), "Ir" (i) - : "cc"); - - smp_mb(); - - return result; -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - - prefetchw(&v->counter); - __asm__ __volatile__("@ atomic_sub\n" -"1: ldrex %0, [%3]\n" -" sub %0, %0, %4\n" -" strex %1, %0, [%3]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) - : "r" (&v->counter), "Ir" (i) - : "cc"); -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - - smp_mb(); - prefetchw(&v->counter); - - __asm__ __volatile__("@ atomic_sub_return\n" -"1: ldrex %0, [%3]\n" -" sub %0, %0, %4\n" -" strex %1, %0, [%3]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) - : "r" (&v->counter), "Ir" (i) - : "cc"); - - smp_mb(); - - return result; +#define ATOMIC_OP_RETURN(op, c_op, asm_op) \ +static inline int atomic_##op##_return(int i, atomic_t *v) \ +{ \ + unsigned long tmp; \ + int result; \ + \ + smp_mb(); \ + prefetchw(&v->counter); \ + \ + __asm__ __volatile__("@ atomic_" #op "_return\n" \ +"1: ldrex %0, [%3]\n" \ +" " #asm_op " %0, %0, %4\n" \ +" strex %1, %0, [%3]\n" \ +" teq %1, #0\n" \ +" bne 1b" \ + : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) \ + : "r" (&v->counter), "Ir" (i) \ + : "cc"); \ + \ + smp_mb(); \ + \ + return result; \ } static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) @@ -174,33 +137,29 @@ #error SMP not supported on pre-ARMv6 CPUs #endif -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int val; +#define ATOMIC_OP(op, c_op, asm_op) \ +static inline void atomic_##op(int i, atomic_t *v) \ +{ \ + unsigned long flags; \ + \ + raw_local_irq_save(flags); \ + v->counter c_op i; \ + raw_local_irq_restore(flags); \ +} \ - raw_local_irq_save(flags); - val = v->counter; - v->counter = val += i; - raw_local_irq_restore(flags); - - return val; +#define ATOMIC_OP_RETURN(op, c_op, asm_op) \ +static inline int atomic_##op##_return(int i, atomic_t *v) \ +{ \ + unsigned long flags; \ + int val; \ + \ + raw_local_irq_save(flags); \ + v->counter c_op i; \ + val = v->counter; \ + raw_local_irq_restore(flags); \ + \ + return val; \ } -#define atomic_add(i, v) (void) atomic_add_return(i, v) - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long flags; - int val; - - raw_local_irq_save(flags); - val = v->counter; - v->counter = val -= i; - raw_local_irq_restore(flags); - - return val; -} -#define atomic_sub(i, v) (void) atomic_sub_return(i, v) static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { @@ -228,6 +187,17 @@ #endif /* __LINUX_ARM_ARCH__ */ +#define ATOMIC_OPS(op, c_op, asm_op) \ + ATOMIC_OP(op, c_op, asm_op) \ + ATOMIC_OP_RETURN(op, c_op, asm_op) + +ATOMIC_OPS(add, +=, add) +ATOMIC_OPS(sub, -=, sub) + +#undef ATOMIC_OPS +#undef ATOMIC_OP_RETURN +#undef ATOMIC_OP + #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) #define atomic_inc(v) atomic_add(1, v) @@ -300,89 +270,60 @@ } #endif -static inline void atomic64_add(long long i, atomic64_t *v) -{ - long long result; - unsigned long tmp; +#define ATOMIC64_OP(op, op1, op2) \ +static inline void atomic64_##op(long long i, atomic64_t *v) \ +{ \ + long long result; \ + unsigned long tmp; \ + \ + prefetchw(&v->counter); \ + __asm__ __volatile__("@ atomic64_" #op "\n" \ +"1: ldrexd %0, %H0, [%3]\n" \ +" " #op1 " %Q0, %Q0, %Q4\n" \ +" " #op2 " %R0, %R0, %R4\n" \ +" strexd %1, %0, %H0, [%3]\n" \ +" teq %1, #0\n" \ +" bne 1b" \ + : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) \ + : "r" (&v->counter), "r" (i) \ + : "cc"); \ +} \ - prefetchw(&v->counter); - __asm__ __volatile__("@ atomic64_add\n" -"1: ldrexd %0, %H0, [%3]\n" -" adds %Q0, %Q0, %Q4\n" -" adc %R0, %R0, %R4\n" -" strexd %1, %0, %H0, [%3]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) - : "r" (&v->counter), "r" (i) - : "cc"); +#define ATOMIC64_OP_RETURN(op, op1, op2) \ +static inline long long atomic64_##op##_return(long long i, atomic64_t *v) \ +{ \ + long long result; \ + unsigned long tmp; \ + \ + smp_mb(); \ + prefetchw(&v->counter); \ + \ + __asm__ __volatile__("@ atomic64_" #op "_return\n" \ +"1: ldrexd %0, %H0, [%3]\n" \ +" " #op1 " %Q0, %Q0, %Q4\n" \ +" " #op2 " %R0, %R0, %R4\n" \ +" strexd %1, %0, %H0, [%3]\n" \ +" teq %1, #0\n" \ +" bne 1b" \ + : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) \ + : "r" (&v->counter), "r" (i) \ + : "cc"); \ + \ + smp_mb(); \ + \ + return result; \ } -static inline long long atomic64_add_return(long long i, atomic64_t *v) -{ - long long result; - unsigned long tmp; +#define ATOMIC64_OPS(op, op1, op2) \ + ATOMIC64_OP(op, op1, op2) \ + ATOMIC64_OP_RETURN(op, op1, op2) - smp_mb(); - prefetchw(&v->counter); +ATOMIC64_OPS(add, adds, adc) +ATOMIC64_OPS(sub, subs, sbc) - __asm__ __volatile__("@ atomic64_add_return\n" -"1: ldrexd %0, %H0, [%3]\n" -" adds %Q0, %Q0, %Q4\n" -" adc %R0, %R0, %R4\n" -" strexd %1, %0, %H0, [%3]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) - : "r" (&v->counter), "r" (i) - : "cc"); - - smp_mb(); - - return result; -} - -static inline void atomic64_sub(long long i, atomic64_t *v) -{ - long long result; - unsigned long tmp; - - prefetchw(&v->counter); - __asm__ __volatile__("@ atomic64_sub\n" -"1: ldrexd %0, %H0, [%3]\n" -" subs %Q0, %Q0, %Q4\n" -" sbc %R0, %R0, %R4\n" -" strexd %1, %0, %H0, [%3]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) - : "r" (&v->counter), "r" (i) - : "cc"); -} - -static inline long long atomic64_sub_return(long long i, atomic64_t *v) -{ - long long result; - unsigned long tmp; - - smp_mb(); - prefetchw(&v->counter); - - __asm__ __volatile__("@ atomic64_sub_return\n" -"1: ldrexd %0, %H0, [%3]\n" -" subs %Q0, %Q0, %Q4\n" -" sbc %R0, %R0, %R4\n" -" strexd %1, %0, %H0, [%3]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter) - : "r" (&v->counter), "r" (i) - : "cc"); - - smp_mb(); - - return result; -} +#undef ATOMIC64_OPS +#undef ATOMIC64_OP_RETURN +#undef ATOMIC64_OP static inline long long atomic64_cmpxchg(atomic64_t *ptr, long long old, long long new)
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 79ecb4f..10e78d0 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h
@@ -466,6 +466,7 @@ */ #define v7_exit_coherency_flush(level) \ asm volatile( \ + ".arch armv7-a \n\t" \ "stmfd sp!, {fp, ip} \n\t" \ "mrc p15, 0, r0, c1, c0, 0 @ get SCTLR \n\t" \ "bic r0, r0, #"__stringify(CR_C)" \n\t" \
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index c45b61a..85738b2 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h
@@ -265,22 +265,6 @@ void *cpu_addr, dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs); -static inline void *dma_alloc_writecombine(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - DEFINE_DMA_ATTRS(attrs); - dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs); - return dma_alloc_attrs(dev, size, dma_handle, flag, &attrs); -} - -static inline void dma_free_writecombine(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t dma_handle) -{ - DEFINE_DMA_ATTRS(attrs); - dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs); - return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs); -} - /* * This can be called during early boot to increase the size of the atomic * coherent DMA pool above the default value of 256KiB. It must be called
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 39eb16b..bfe2a2f 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h
@@ -45,7 +45,7 @@ #else -extern inline void *return_address(unsigned int level) +static inline void *return_address(unsigned int level) { return NULL; }
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 3d23418..1805674 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h
@@ -178,6 +178,7 @@ /* PCI fixed i/o mapping */ #define PCI_IO_VIRT_BASE 0xfee00000 +#define PCI_IOBASE ((void __iomem *)PCI_IO_VIRT_BASE) #if defined(CONFIG_PCI) void pci_ioremap_set_mem_type(int mem_type);
diff --git a/arch/arm/include/asm/irq_work.h b/arch/arm/include/asm/irq_work.h new file mode 100644 index 0000000..712d03e --- /dev/null +++ b/arch/arm/include/asm/irq_work.h
@@ -0,0 +1,11 @@ +#ifndef __ASM_ARM_IRQ_WORK_H +#define __ASM_ARM_IRQ_WORK_H + +#include <asm/smp_plat.h> + +static inline bool arch_irq_work_has_interrupt(void) +{ + return is_smp(); +} + +#endif /* _ASM_ARM_IRQ_WORK_H */
diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 69b7469..b9db269 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h
@@ -149,6 +149,11 @@ static inline u8 kvm_vcpu_trap_get_fault(struct kvm_vcpu *vcpu) { + return kvm_vcpu_get_hsr(vcpu) & HSR_FSC; +} + +static inline u8 kvm_vcpu_trap_get_fault_type(struct kvm_vcpu *vcpu) +{ return kvm_vcpu_get_hsr(vcpu) & HSR_FSC_TYPE; }
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 6dfb404..53036e2 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h
@@ -19,6 +19,8 @@ #ifndef __ARM_KVM_HOST_H__ #define __ARM_KVM_HOST_H__ +#include <linux/types.h> +#include <linux/kvm_types.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> @@ -40,9 +42,8 @@ #include <kvm/arm_vgic.h> -struct kvm_vcpu; u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode); -int kvm_target_cpu(void); +int __attribute_const__ kvm_target_cpu(void); int kvm_reset_vcpu(struct kvm_vcpu *vcpu); void kvm_reset_coprocs(struct kvm_vcpu *vcpu); @@ -149,20 +150,17 @@ u32 halt_wakeup; }; -struct kvm_vcpu_init; int kvm_vcpu_set_target(struct kvm_vcpu *vcpu, const struct kvm_vcpu_init *init); int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init); unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); -struct kvm_one_reg; int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); u64 kvm_call_hyp(void *hypfn, ...); void force_vm_exit(const cpumask_t *mask); #define KVM_ARCH_WANT_MMU_NOTIFIER -struct kvm; int kvm_unmap_hva(struct kvm *kvm, unsigned long hva); int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end); @@ -172,7 +170,8 @@ int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); /* We do not have shadow page tables, hence the empty hooks */ -static inline int kvm_age_hva(struct kvm *kvm, unsigned long hva) +static inline int kvm_age_hva(struct kvm *kvm, unsigned long start, + unsigned long end) { return 0; } @@ -182,12 +181,16 @@ return 0; } +static inline void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm, + unsigned long address) +{ +} + struct kvm_vcpu *kvm_arm_get_running_vcpu(void); struct kvm_vcpu __percpu **kvm_get_running_vcpus(void); int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices); unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu); -struct kvm_one_reg; int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); @@ -233,4 +236,10 @@ int kvm_perf_init(void); int kvm_perf_teardown(void); +static inline void kvm_arch_hardware_disable(void) {} +static inline void kvm_arch_hardware_unsetup(void) {} +static inline void kvm_arch_sync_events(struct kvm *kvm) {} +static inline void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) {} +static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {} + #endif /* __ARM_KVM_HOST_H__ */
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 5cc0b0f..acb0d57 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h
@@ -37,6 +37,11 @@ */ #define TRAMPOLINE_VA UL(CONFIG_VECTORS_BASE) +/* + * KVM_MMU_CACHE_MIN_PAGES is the number of stage2 page table translation levels. + */ +#define KVM_MMU_CACHE_MIN_PAGES 2 + #ifndef __ASSEMBLY__ #include <asm/cacheflush.h> @@ -50,7 +55,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm); void kvm_free_stage2_pgd(struct kvm *kvm); int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, - phys_addr_t pa, unsigned long size); + phys_addr_t pa, unsigned long size, bool writable); int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run); @@ -78,22 +83,16 @@ flush_pmd_entry(pte); } -static inline bool kvm_is_write_fault(unsigned long hsr) -{ - unsigned long hsr_ec = hsr >> HSR_EC_SHIFT; - if (hsr_ec == HSR_EC_IABT) - return false; - else if ((hsr & HSR_ISV) && !(hsr & HSR_WNR)) - return false; - else - return true; -} - static inline void kvm_clean_pgd(pgd_t *pgd) { clean_dcache_area(pgd, PTRS_PER_S2_PGD * sizeof(pgd_t)); } +static inline void kvm_clean_pmd(pmd_t *pmd) +{ + clean_dcache_area(pmd, PTRS_PER_PMD * sizeof(pmd_t)); +} + static inline void kvm_clean_pmd_entry(pmd_t *pmd) { clean_pmd_entry(pmd); @@ -134,10 +133,23 @@ } -#define kvm_pte_table_empty(ptep) kvm_page_empty(ptep) -#define kvm_pmd_table_empty(pmdp) kvm_page_empty(pmdp) -#define kvm_pud_table_empty(pudp) (0) +#define kvm_pte_table_empty(kvm, ptep) kvm_page_empty(ptep) +#define kvm_pmd_table_empty(kvm, pmdp) kvm_page_empty(pmdp) +#define kvm_pud_table_empty(kvm, pudp) (0) +#define KVM_PREALLOC_LEVEL 0 + +static inline int kvm_prealloc_hwpgd(struct kvm *kvm, pgd_t *pgd) +{ + return 0; +} + +static inline void kvm_free_hwpgd(struct kvm *kvm) { } + +static inline void *kvm_get_hwpgd(struct kvm *kvm) +{ + return kvm->arch.pgd; +} struct kvm;
diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 57ff7f2..d428e38 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h
@@ -20,7 +20,12 @@ * to consider dynamic allocation. */ #define MAX_CPUS_PER_CLUSTER 4 + +#ifdef CONFIG_MCPM_QUAD_CLUSTER +#define MAX_NR_CLUSTERS 4 +#else #define MAX_NR_CLUSTERS 2 +#endif #ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 219ac88..f027941 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h
@@ -182,6 +182,8 @@ #define pmd_addr_end(addr,end) (end) #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) +#define pte_special(pte) (0) +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } /* * We don't have huge page support for short descriptors, for the moment
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 06e0bc0..a31ecdad 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h
@@ -213,10 +213,19 @@ #define pmd_isclear(pmd, val) (!(pmd_val(pmd) & (val))) #define pmd_young(pmd) (pmd_isset((pmd), PMD_SECT_AF)) +#define pte_special(pte) (pte_isset((pte), L_PTE_SPECIAL)) +static inline pte_t pte_mkspecial(pte_t pte) +{ + pte_val(pte) |= L_PTE_SPECIAL; + return pte; +} +#define __HAVE_ARCH_PTE_SPECIAL #define __HAVE_ARCH_PMD_WRITE #define pmd_write(pmd) (pmd_isclear((pmd), L_PMD_SECT_RDONLY)) #define pmd_dirty(pmd) (pmd_isset((pmd), L_PMD_SECT_DIRTY)) +#define pud_page(pud) pmd_page(__pmd(pud_val(pud))) +#define pud_write(pud) pmd_write(__pmd(pud_val(pud))) #define pmd_hugewillfault(pmd) (!pmd_young(pmd) || !pmd_write(pmd)) #define pmd_thp_or_huge(pmd) (pmd_huge(pmd) || pmd_trans_huge(pmd)) @@ -224,6 +233,12 @@ #ifdef CONFIG_TRANSPARENT_HUGEPAGE #define pmd_trans_huge(pmd) (pmd_val(pmd) && !pmd_table(pmd)) #define pmd_trans_splitting(pmd) (pmd_isset((pmd), L_PMD_SECT_SPLITTING)) + +#ifdef CONFIG_HAVE_RCU_TABLE_FREE +#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH +void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address, + pmd_t *pmdp); +#endif #endif #define PMD_BIT_FUNC(fn,op) \
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 01baef0..3b30062 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h
@@ -100,7 +100,7 @@ #define PAGE_HYP _MOD_PROT(pgprot_kernel, L_PTE_HYP) #define PAGE_HYP_DEVICE _MOD_PROT(pgprot_hyp_device, L_PTE_HYP) #define PAGE_S2 _MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY) -#define PAGE_S2_DEVICE _MOD_PROT(pgprot_s2_device, L_PTE_S2_RDWR) +#define PAGE_S2_DEVICE _MOD_PROT(pgprot_s2_device, L_PTE_S2_RDONLY) #define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE) #define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN) @@ -226,7 +226,6 @@ #define pte_dirty(pte) (pte_isset((pte), L_PTE_DIRTY)) #define pte_young(pte) (pte_isset((pte), L_PTE_YOUNG)) #define pte_exec(pte) (pte_isclear((pte), L_PTE_XN)) -#define pte_special(pte) (0) #define pte_valid_user(pte) \ (pte_valid(pte) && pte_isset((pte), L_PTE_USER) && pte_young(pte)) @@ -245,7 +244,8 @@ unsigned long ext = 0; if (addr < TASK_SIZE && pte_valid_user(pteval)) { - __sync_icache_dcache(pteval); + if (!pte_special(pteval)) + __sync_icache_dcache(pteval); ext |= PTE_EXT_NG; } @@ -264,8 +264,6 @@ PTE_BIT_FUNC(mkexec, &= ~L_PTE_XN); PTE_BIT_FUNC(mknexec, |= L_PTE_XN); -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER |
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 2ec765c..18f5a55 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h
@@ -49,12 +49,6 @@ extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int)); /* - * Boot a secondary CPU, and assign it the specified idle task. - * This also gives us the initial stack to use for this CPU. - */ -extern int boot_secondary(unsigned int cpu, struct task_struct *); - -/* * Called from platform specific assembly code, this is the * secondary CPU entry point. */
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index 4651f69..e86c985 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h
@@ -63,8 +63,8 @@ if (i + n > SYSCALL_MAX_ARGS) { unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i; unsigned int n_bad = n + i - SYSCALL_MAX_ARGS; - pr_warning("%s called with max args %d, handling only %d\n", - __func__, i + n, SYSCALL_MAX_ARGS); + pr_warn("%s called with max args %d, handling only %d\n", + __func__, i + n, SYSCALL_MAX_ARGS); memset(args_bad, 0, n_bad * sizeof(args[0])); n = SYSCALL_MAX_ARGS - i; } @@ -88,8 +88,8 @@ return; if (i + n > SYSCALL_MAX_ARGS) { - pr_warning("%s called with max args %d, handling only %d\n", - __func__, i + n, SYSCALL_MAX_ARGS); + pr_warn("%s called with max args %d, handling only %d\n", + __func__, i + n, SYSCALL_MAX_ARGS); n = SYSCALL_MAX_ARGS - i; }
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index f1a0dac..3cadb72 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h
@@ -35,12 +35,39 @@ #define MMU_GATHER_BUNDLE 8 +#ifdef CONFIG_HAVE_RCU_TABLE_FREE +static inline void __tlb_remove_table(void *_table) +{ + free_page_and_swap_cache((struct page *)_table); +} + +struct mmu_table_batch { + struct rcu_head rcu; + unsigned int nr; + void *tables[0]; +}; + +#define MAX_TABLE_BATCH \ + ((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *)) + +extern void tlb_table_flush(struct mmu_gather *tlb); +extern void tlb_remove_table(struct mmu_gather *tlb, void *table); + +#define tlb_remove_entry(tlb, entry) tlb_remove_table(tlb, entry) +#else +#define tlb_remove_entry(tlb, entry) tlb_remove_page(tlb, entry) +#endif /* CONFIG_HAVE_RCU_TABLE_FREE */ + /* * TLB handling. This allows us to remove pages from the page * tables, and efficiently handle the TLB issues. */ struct mmu_gather { struct mm_struct *mm; +#ifdef CONFIG_HAVE_RCU_TABLE_FREE + struct mmu_table_batch *batch; + unsigned int need_flush; +#endif unsigned int fullmm; struct vm_area_struct *vma; unsigned long start, end; @@ -101,6 +128,9 @@ static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) { tlb_flush(tlb); +#ifdef CONFIG_HAVE_RCU_TABLE_FREE + tlb_table_flush(tlb); +#endif } static inline void tlb_flush_mmu_free(struct mmu_gather *tlb) @@ -129,6 +159,10 @@ tlb->pages = tlb->local; tlb->nr = 0; __tlb_alloc_page(tlb); + +#ifdef CONFIG_HAVE_RCU_TABLE_FREE + tlb->batch = NULL; +#endif } static inline void @@ -205,7 +239,7 @@ tlb_add_flush(tlb, addr + SZ_1M); #endif - tlb_remove_page(tlb, pte); + tlb_remove_entry(tlb, pte); } static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, @@ -213,7 +247,7 @@ { #ifdef CONFIG_ARM_LPAE tlb_add_flush(tlb, addr); - tlb_remove_page(tlb, virt_to_page(pmdp)); + tlb_remove_entry(tlb, virt_to_page(pmdp)); #endif }
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h index 83259b8..5f833f7 100644 --- a/arch/arm/include/asm/tls.h +++ b/arch/arm/include/asm/tls.h
@@ -1,6 +1,9 @@ #ifndef __ASMARM_TLS_H #define __ASMARM_TLS_H +#include <linux/compiler.h> +#include <asm/thread_info.h> + #ifdef __ASSEMBLY__ #include <asm/asm-offsets.h> .macro switch_tls_none, base, tp, tpuser, tmp1, tmp2 @@ -50,6 +53,49 @@ #endif #ifndef __ASSEMBLY__ + +static inline void set_tls(unsigned long val) +{ + struct thread_info *thread; + + thread = current_thread_info(); + + thread->tp_value[0] = val; + + /* + * This code runs with preemption enabled and therefore must + * be reentrant with respect to switch_tls. + * + * We need to ensure ordering between the shadow state and the + * hardware state, so that we don't corrupt the hardware state + * with a stale shadow state during context switch. + * + * If we're preempted here, switch_tls will load TPIDRURO from + * thread_info upon resuming execution and the following mcr + * is merely redundant. + */ + barrier(); + + if (!tls_emu) { + if (has_tls_reg) { + asm("mcr p15, 0, %0, c13, c0, 3" + : : "r" (val)); + } else { +#ifdef CONFIG_KUSER_HELPERS + /* + * User space must never try to access this + * directly. Expect your app to break + * eventually if you do so. The user helper + * at 0xffff0fe0 must be used instead. (see + * entry-armv.S for details) + */ + *((unsigned int *)0xffff0ff0) = val; +#endif + } + + } +} + static inline unsigned long get_tpuser(void) { unsigned long reg = 0; @@ -59,5 +105,23 @@ return reg; } + +static inline void set_tpuser(unsigned long val) +{ + /* Since TPIDRURW is fully context-switched (unlike TPIDRURO), + * we need not update thread_info. + */ + if (has_tls_reg && !tls_emu) { + asm("mcr p15, 0, %0, c13, c0, 2" + : : "r" (val)); + } +} + +static inline void flush_tls(void) +{ + set_tls(0); + set_tpuser(0); +} + #endif #endif /* __ASMARM_TLS_H */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index a4cd7af..4767eb9 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h
@@ -107,8 +107,11 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -extern int __get_user_lo8(void *); +extern int __get_user_32t_8(void *); extern int __get_user_8(void *); +extern int __get_user_64t_1(void *); +extern int __get_user_64t_2(void *); +extern int __get_user_64t_4(void *); #define __GUP_CLOBBER_1 "lr", "cc" #ifdef CONFIG_CPU_USE_DOMAINS @@ -117,7 +120,7 @@ #define __GUP_CLOBBER_2 "lr", "cc" #endif #define __GUP_CLOBBER_4 "lr", "cc" -#define __GUP_CLOBBER_lo8 "lr", "cc" +#define __GUP_CLOBBER_32t_8 "lr", "cc" #define __GUP_CLOBBER_8 "lr", "cc" #define __get_user_x(__r2,__p,__e,__l,__s) \ @@ -131,12 +134,30 @@ /* narrowing a double-word get into a single 32bit word register: */ #ifdef __ARMEB__ -#define __get_user_xb(__r2, __p, __e, __l, __s) \ - __get_user_x(__r2, __p, __e, __l, lo8) +#define __get_user_x_32t(__r2, __p, __e, __l, __s) \ + __get_user_x(__r2, __p, __e, __l, 32t_8) #else -#define __get_user_xb __get_user_x +#define __get_user_x_32t __get_user_x #endif +/* + * storing result into proper least significant word of 64bit target var, + * different only for big endian case where 64 bit __r2 lsw is r3: + */ +#ifdef __ARMEB__ +#define __get_user_x_64t(__r2, __p, __e, __l, __s) \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ + "bl __get_user_64t_" #__s \ + : "=&r" (__e), "=r" (__r2) \ + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) +#else +#define __get_user_x_64t __get_user_x +#endif + + #define __get_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ @@ -146,17 +167,26 @@ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, __l, 1); \ + if (sizeof((x)) >= 8) \ + __get_user_x_64t(__r2, __p, __e, __l, 1); \ + else \ + __get_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __get_user_x(__r2, __p, __e, __l, 2); \ + if (sizeof((x)) >= 8) \ + __get_user_x_64t(__r2, __p, __e, __l, 2); \ + else \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, __l, 4); \ + if (sizeof((x)) >= 8) \ + __get_user_x_64t(__r2, __p, __e, __l, 4); \ + else \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ if (sizeof((x)) < 8) \ - __get_user_xb(__r2, __p, __e, __l, 4); \ + __get_user_x_32t(__r2, __p, __e, __l, 4); \ else \ __get_user_x(__r2, __p, __e, __l, 8); \ break; \
diff --git a/arch/arm/include/debug/bcm63xx.S b/arch/arm/include/debug/bcm63xx.S new file mode 100644 index 0000000..e7164d5 --- /dev/null +++ b/arch/arm/include/debug/bcm63xx.S
@@ -0,0 +1,33 @@ +/* + * Broadcom BCM63xx low-level UART debug + * + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/serial_bcm63xx.h> + + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm + + .macro senduart, rd, rx + /* word access do not work */ + strb \rd, [\rx, #UART_FIFO_REG] + .endm + + .macro waituart, rd, rx +1001: ldr \rd, [\rx, #UART_IR_REG] + tst \rd, #(1 << UART_IR_TXEMPTY) + beq 1001b + .endm + + .macro busyuart, rd, rx +1002: ldr \rd, [\rx, #UART_IR_REG] + tst \rd, #(1 << UART_IR_TXTRESH) + beq 1002b + .endm
diff --git a/arch/arm/include/debug/meson.S b/arch/arm/include/debug/meson.S new file mode 100644 index 0000000..1bae99b --- /dev/null +++ b/arch/arm/include/debug/meson.S
@@ -0,0 +1,35 @@ +/* + * Copyright (C) 2014 Carlo Caione + * Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define MESON_AO_UART_WFIFO 0x0 +#define MESON_AO_UART_STATUS 0xc + +#define MESON_AO_UART_TX_FIFO_EMPTY (1 << 22) +#define MESON_AO_UART_TX_FIFO_FULL (1 << 21) + + .macro addruart, rp, rv, tmp + ldr \rp, =(CONFIG_DEBUG_UART_PHYS) @ physical + ldr \rv, =(CONFIG_DEBUG_UART_VIRT) @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #MESON_AO_UART_WFIFO] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #MESON_AO_UART_STATUS] + tst \rd, #MESON_AO_UART_TX_FIFO_EMPTY + beq 1002b + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #MESON_AO_UART_STATUS] + tst \rd, #MESON_AO_UART_TX_FIFO_FULL + bne 1001b + .endm
diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index e6ebdd3..09ee408 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h
@@ -25,6 +25,7 @@ #define __KVM_HAVE_GUEST_DEBUG #define __KVM_HAVE_IRQ_LINE +#define __KVM_HAVE_READONLY_MEM #define KVM_REG_SIZE(id) \ (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) @@ -173,6 +174,7 @@ #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 /* KVM_IRQ_LINE irq field index values */ #define KVM_ARM_IRQ_TYPE_SHIFT 24
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index f7b450f..a88671c 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c
@@ -98,6 +98,14 @@ EXPORT_SYMBOL(__get_user_1); EXPORT_SYMBOL(__get_user_2); EXPORT_SYMBOL(__get_user_4); +EXPORT_SYMBOL(__get_user_8); + +#ifdef __ARMEB__ +EXPORT_SYMBOL(__get_user_64t_1); +EXPORT_SYMBOL(__get_user_64t_2); +EXPORT_SYMBOL(__get_user_64t_4); +EXPORT_SYMBOL(__get_user_32t_8); +#endif EXPORT_SYMBOL(__put_user_1); EXPORT_SYMBOL(__put_user_2);
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 713e807..2d2d608 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c
@@ -10,6 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/compiler.h> #include <linux/sched.h> #include <linux/mm.h> #include <linux/dma-mapping.h> @@ -39,10 +40,19 @@ * GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c * (http://gcc.gnu.org/PR8896) and incorrect structure * initialisation in fs/jffs2/erase.c + * GCC 4.8.0-4.8.2: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58854 + * miscompiles find_get_entry(), and can result in EXT3 and EXT4 + * filesystem corruption (possibly other FS too). */ +#ifdef __GNUC__ #if (__GNUC__ == 3 && __GNUC_MINOR__ < 3) #error Your compiler is too buggy; it is known to miscompile kernels. -#error Known good compilers: 3.3 +#error Known good compilers: 3.3, 4.x +#endif +#if GCC_VERSION >= 40800 && GCC_VERSION < 40803 +#error Your compiler is too buggy; it is known to miscompile kernels +#error and result in filesystem corruption and oopses. +#endif #endif int main(void)
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index 7807ef5..528f8af 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c
@@ -130,7 +130,7 @@ strlcat(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE); #elif defined(CONFIG_CMDLINE_FORCE) - pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); + pr_warn("Ignoring tag cmdline (using the default kernel command line)\n"); #else strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 36276cd..2f5555d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S
@@ -146,7 +146,7 @@ #define SPFIX(code...) #endif - .macro svc_entry, stack_hole=0 + .macro svc_entry, stack_hole=0, trace=1 UNWIND(.fnstart ) UNWIND(.save {r0 - pc} ) sub sp, sp, #(S_FRAME_SIZE + \stack_hole - 4) @@ -182,9 +182,11 @@ @ stmia r7, {r2 - r6} + .if \trace #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif + .endif .endm .align 5 @@ -295,6 +297,15 @@ ENDPROC(__pabt_svc) .align 5 +__fiq_svc: + svc_entry trace=0 + mov r0, sp @ struct pt_regs *regs + bl handle_fiq_as_nmi + svc_exit_via_fiq + UNWIND(.fnend ) +ENDPROC(__fiq_svc) + + .align 5 .LCcralign: .word cr_alignment #ifdef MULTI_DABORT @@ -305,6 +316,46 @@ .word fp_enter /* + * Abort mode handlers + */ + +@ +@ Taking a FIQ in abort mode is similar to taking a FIQ in SVC mode +@ and reuses the same macros. However in abort mode we must also +@ save/restore lr_abt and spsr_abt to make nested aborts safe. +@ + .align 5 +__fiq_abt: + svc_entry trace=0 + + ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT ) + THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT ) + THUMB( msr cpsr_c, r0 ) + mov r1, lr @ Save lr_abt + mrs r2, spsr @ Save spsr_abt, abort is now safe + ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT ) + THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT ) + THUMB( msr cpsr_c, r0 ) + stmfd sp!, {r1 - r2} + + add r0, sp, #8 @ struct pt_regs *regs + bl handle_fiq_as_nmi + + ldmfd sp!, {r1 - r2} + ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT ) + THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT ) + THUMB( msr cpsr_c, r0 ) + mov lr, r1 @ Restore lr_abt, abort is unsafe + msr spsr_cxsf, r2 @ Restore spsr_abt + ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT ) + THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT ) + THUMB( msr cpsr_c, r0 ) + + svc_exit_via_fiq + UNWIND(.fnend ) +ENDPROC(__fiq_abt) + +/* * User mode handlers * * EABI note: sp_svc is always 64-bit aligned here, so should S_FRAME_SIZE @@ -314,13 +365,16 @@ #error "sizeof(struct pt_regs) must be a multiple of 8" #endif - .macro usr_entry + .macro usr_entry, trace=1 UNWIND(.fnstart ) UNWIND(.cantunwind ) @ don't unwind the user space sub sp, sp, #S_FRAME_SIZE ARM( stmib sp, {r1 - r12} ) THUMB( stmia sp, {r0 - r12} ) + ATRAP( mrc p15, 0, r7, c1, c0, 0) + ATRAP( ldr r8, .LCcralign) + ldmia r0, {r3 - r5} add r0, sp, #S_PC @ here for interlock avoidance mov r6, #-1 @ "" "" "" "" @@ -328,6 +382,8 @@ str r3, [sp] @ save the "real" r0 copied @ from the exception stack + ATRAP( ldr r8, [r8, #0]) + @ @ We are now ready to fill in the remaining blanks on the stack: @ @@ -341,20 +397,21 @@ ARM( stmdb r0, {sp, lr}^ ) THUMB( store_user_sp_lr r0, r1, S_SP - S_PC ) - @ @ Enable the alignment trap while in kernel mode - @ - alignment_trap r0, .LCcralign + ATRAP( teq r8, r7) + ATRAP( mcrne p15, 0, r8, c1, c0, 0) @ @ Clear FP to mark the first stack frame @ zero_fp + .if \trace #ifdef CONFIG_IRQSOFF_TRACER bl trace_hardirqs_off #endif ct_user_exit save = 0 + .endif .endm .macro kuser_cmpxchg_check @@ -683,6 +740,17 @@ ENDPROC(__pabt_usr) ENDPROC(ret_from_exception) + .align 5 +__fiq_usr: + usr_entry trace=0 + kuser_cmpxchg_check + mov r0, sp @ struct pt_regs *regs + bl handle_fiq_as_nmi + get_thread_info tsk + restore_user_regs fast = 0, offset = 0 + UNWIND(.fnend ) +ENDPROC(__fiq_usr) + /* * Register switch for ARMv3 and ARMv4 processors * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info @@ -1118,17 +1186,29 @@ b vector_addrexcptn /*============================================================================= - * Undefined FIQs + * FIQ "NMI" handler *----------------------------------------------------------------------------- - * Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC - * MUST PRESERVE SVC SPSR, but need to switch to SVC mode to show our msg. - * Basically to switch modes, we *HAVE* to clobber one register... brain - * damage alert! I don't think that we can execute any code in here in any - * other mode than FIQ... Ok you can switch to another mode, but you can't - * get out of that mode without clobbering one register. + * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86 + * systems. */ -vector_fiq: - subs pc, lr, #4 + vector_stub fiq, FIQ_MODE, 4 + + .long __fiq_usr @ 0 (USR_26 / USR_32) + .long __fiq_svc @ 1 (FIQ_26 / FIQ_32) + .long __fiq_svc @ 2 (IRQ_26 / IRQ_32) + .long __fiq_svc @ 3 (SVC_26 / SVC_32) + .long __fiq_svc @ 4 + .long __fiq_svc @ 5 + .long __fiq_svc @ 6 + .long __fiq_abt @ 7 + .long __fiq_svc @ 8 + .long __fiq_svc @ 9 + .long __fiq_svc @ a + .long __fiq_svc @ b + .long __fiq_svc @ c + .long __fiq_svc @ d + .long __fiq_svc @ e + .long __fiq_svc @ f .globl vector_fiq_offset .equ vector_fiq_offset, vector_fiq
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index e52fe5a..6bb09d4 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S
@@ -366,7 +366,7 @@ str r0, [sp, #S_OLD_R0] @ Save OLD_R0 #endif zero_fp - alignment_trap ip, __cr_alignment + alignment_trap r10, ip, __cr_alignment enable_irq ct_user_exit get_thread_info tsk
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 2fdf867..4176df7 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S
@@ -37,11 +37,19 @@ #endif .endm - .macro alignment_trap, rtemp, label #ifdef CONFIG_ALIGNMENT_TRAP - ldr \rtemp, \label - ldr \rtemp, [\rtemp] - mcr p15, 0, \rtemp, c1, c0 +#define ATRAP(x...) x +#else +#define ATRAP(x...) +#endif + + .macro alignment_trap, rtmp1, rtmp2, label +#ifdef CONFIG_ALIGNMENT_TRAP + mrc p15, 0, \rtmp2, c1, c0, 0 + ldr \rtmp1, \label + ldr \rtmp1, [\rtmp1] + teq \rtmp1, \rtmp2 + mcrne p15, 0, \rtmp1, c1, c0, 0 #endif .endm @@ -216,6 +224,34 @@ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr .endm + @ + @ svc_exit_via_fiq - like svc_exit but switches to FIQ mode before exit + @ + @ This macro acts in a similar manner to svc_exit but switches to FIQ + @ mode to restore the final part of the register state. + @ + @ We cannot use the normal svc_exit procedure because that would + @ clobber spsr_svc (FIQ could be delivered during the first few + @ instructions of vector_swi meaning its contents have not been + @ saved anywhere). + @ + @ Note that, unlike svc_exit, this macro also does not allow a caller + @ supplied rpsr. This is because the FIQ exceptions are not re-entrant + @ and the handlers cannot call into the scheduler (meaning the value + @ on the stack remains correct). + @ + .macro svc_exit_via_fiq + mov r0, sp + ldmib r0, {r1 - r14} @ abort is deadly from here onward (it will + @ clobber state restored below) + msr cpsr_c, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT + add r8, r0, #S_PC + ldr r9, [r0, #S_PSR] + msr spsr_cxsf, r9 + ldr r0, [r0, #S_R0] + ldmia r8, {pc}^ + .endm + .macro restore_user_regs, fast = 0, offset = 0 ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr ldr lr, [sp, #\offset + S_PC]! @ get pc @@ -267,6 +303,25 @@ rfeia sp! .endm + @ + @ svc_exit_via_fiq - like svc_exit but switches to FIQ mode before exit + @ + @ For full details see non-Thumb implementation above. + @ + .macro svc_exit_via_fiq + add r0, sp, #S_R2 + ldr lr, [sp, #S_LR] + ldr sp, [sp, #S_SP] @ abort is deadly from here onward (it will + @ clobber state restored below) + ldmia r0, {r2 - r12} + mov r1, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT + msr cpsr_c, r1 + sub r0, #S_R2 + add r8, r0, #S_PC + ldmia r0, {r0 - r1} + rfeia r8 + .endm + #ifdef CONFIG_CPU_V7M /* * Note we don't need to do clrex here as clearing the local monitor is
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 918875d..b37752a 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c
@@ -52,7 +52,8 @@ (unsigned)&vector_fiq_offset; \ }) -static unsigned long no_fiq_insn; +static unsigned long dfl_fiq_insn; +static struct pt_regs dfl_fiq_regs; /* Default reacquire function * - we always relinquish FIQ control @@ -60,8 +61,15 @@ */ static int fiq_def_op(void *ref, int relinquish) { - if (!relinquish) - set_fiq_handler(&no_fiq_insn, sizeof(no_fiq_insn)); + if (!relinquish) { + /* Restore default handler and registers */ + local_fiq_disable(); + set_fiq_regs(&dfl_fiq_regs); + set_fiq_handler(&dfl_fiq_insn, sizeof(dfl_fiq_insn)); + local_fiq_enable(); + + /* FIXME: notify irq controller to standard enable FIQs */ + } return 0; } @@ -150,6 +158,7 @@ void __init init_FIQ(int start) { unsigned offset = FIQ_OFFSET; - no_fiq_insn = *(unsigned long *)(0xffff0000 + offset); + dfl_fiq_insn = *(unsigned long *)(0xffff0000 + offset); + get_fiq_regs(&dfl_fiq_regs); fiq_start = start; }
diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c index bb8b796..c4cc50e 100644 --- a/arch/arm/kernel/hibernate.c +++ b/arch/arm/kernel/hibernate.c
@@ -21,8 +21,7 @@ #include <asm/idmap.h> #include <asm/suspend.h> #include <asm/memory.h> - -extern const void __nosave_begin, __nosave_end; +#include <asm/sections.h> int pfn_is_nosave(unsigned long pfn) {
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 4d963fb..b5b452f 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c
@@ -113,8 +113,8 @@ GEN_READ_WB_REG_CASES(ARM_OP2_WVR, val); GEN_READ_WB_REG_CASES(ARM_OP2_WCR, val); default: - pr_warning("attempt to read from unknown breakpoint " - "register %d\n", n); + pr_warn("attempt to read from unknown breakpoint register %d\n", + n); } return val; @@ -128,8 +128,8 @@ GEN_WRITE_WB_REG_CASES(ARM_OP2_WVR, val); GEN_WRITE_WB_REG_CASES(ARM_OP2_WCR, val); default: - pr_warning("attempt to write to unknown breakpoint " - "register %d\n", n); + pr_warn("attempt to write to unknown breakpoint register %d\n", + n); } isb(); } @@ -292,7 +292,7 @@ case TYPE_DATA: return get_num_wrps(); default: - pr_warning("unknown slot type: %d\n", type); + pr_warn("unknown slot type: %d\n", type); return 0; } } @@ -365,7 +365,7 @@ } if (i == max_slots) { - pr_warning("Can't find any breakpoint slot\n"); + pr_warn("Can't find any breakpoint slot\n"); return -EBUSY; } @@ -417,7 +417,7 @@ } if (i == max_slots) { - pr_warning("Can't find any breakpoint slot\n"); + pr_warn("Can't find any breakpoint slot\n"); return; } @@ -894,8 +894,8 @@ { int cpu = smp_processor_id(); - pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n", - instr, cpu); + pr_warn("Debug register access (0x%x) caused undefined instruction on CPU %d\n", + instr, cpu); /* Set the error flag for this CPU and skip the faulting instruction. */ cpumask_set_cpu(cpu, &debug_err_mask);
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 2c42576..7c81ec4 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c
@@ -65,24 +65,7 @@ */ void handle_IRQ(unsigned int irq, struct pt_regs *regs) { - struct pt_regs *old_regs = set_irq_regs(regs); - - irq_enter(); - - /* - * Some hardware gives randomly wrong interrupts. Rather - * than crashing, do something sensible. - */ - if (unlikely(irq >= nr_irqs)) { - if (printk_ratelimit()) - printk(KERN_WARNING "Bad IRQ%u\n", irq); - ack_bad_irq(irq); - } else { - generic_handle_irq(irq); - } - - irq_exit(); - set_irq_regs(old_regs); + __handle_domain_irq(NULL, irq, false, regs); } /* @@ -175,7 +158,7 @@ c = irq_data_get_irq_chip(d); if (!c->irq_set_affinity) pr_debug("IRQ%u: unable to set affinity\n", d->irq); - else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret) + else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret) cpumask_copy(d->affinity, affinity); return ret; @@ -205,8 +188,8 @@ raw_spin_unlock(&desc->lock); if (affinity_broken && printk_ratelimit()) - pr_warning("IRQ%u no longer affine to CPU%u\n", i, - smp_processor_id()); + pr_warn("IRQ%u no longer affine to CPU%u\n", + i, smp_processor_id()); } local_irq_restore(flags);
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c index 08d7312..b206d77 100644 --- a/arch/arm/kernel/kprobes-test.c +++ b/arch/arm/kernel/kprobes-test.c
@@ -110,10 +110,13 @@ * * @ TESTCASE_START * bl __kprobes_test_case_start - * @ start of inline data... + * .pushsection .rodata + * "10: * .ascii "mov r0, r7" @ text title for test case * .byte 0 - * .align 2, 0 + * .popsection + * @ start of inline data... + * .word 10b @ pointer to title in .rodata section * * @ TEST_ARG_REG * .byte ARG_TYPE_REG @@ -971,7 +974,7 @@ __asm__ __volatile__ ( "stmdb sp!, {r4-r11} \n\t" "sub sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t" - "bic r0, lr, #1 @ r0 = inline title string \n\t" + "bic r0, lr, #1 @ r0 = inline data \n\t" "mov r1, sp \n\t" "bl kprobes_test_case_start \n\t" "bx r0 \n\t" @@ -1349,15 +1352,14 @@ return pc + 4; } -static uintptr_t __used kprobes_test_case_start(const char *title, void *stack) +static uintptr_t __used kprobes_test_case_start(const char **title, void *stack) { struct test_arg *args; struct test_arg_end *end_arg; unsigned long test_code; - args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4); - - current_title = title; + current_title = *title++; + args = (struct test_arg *)title; current_args = args; current_stack = stack;
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h index eecc90a..4430990 100644 --- a/arch/arm/kernel/kprobes-test.h +++ b/arch/arm/kernel/kprobes-test.h
@@ -111,11 +111,14 @@ #define TESTCASE_START(title) \ __asm__ __volatile__ ( \ "bl __kprobes_test_case_start \n\t" \ + ".pushsection .rodata \n\t" \ + "10: \n\t" \ /* don't use .asciz here as 'title' may be */ \ /* multiple strings to be concatenated. */ \ ".ascii "#title" \n\t" \ ".byte 0 \n\t" \ - ".align 2, 0 \n\t" + ".popsection \n\t" \ + ".word 10b \n\t" #define TEST_ARG_REG(reg, val) \ ".byte "__stringify(ARG_TYPE_REG)" \n\t" \
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index e6a6edb..eb2c4d5 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c
@@ -76,21 +76,15 @@ static void cpu_pmu_enable_percpu_irq(void *data) { - struct arm_pmu *cpu_pmu = data; - struct platform_device *pmu_device = cpu_pmu->plat_device; - int irq = platform_get_irq(pmu_device, 0); + int irq = *(int *)data; enable_percpu_irq(irq, IRQ_TYPE_NONE); - cpumask_set_cpu(smp_processor_id(), &cpu_pmu->active_irqs); } static void cpu_pmu_disable_percpu_irq(void *data) { - struct arm_pmu *cpu_pmu = data; - struct platform_device *pmu_device = cpu_pmu->plat_device; - int irq = platform_get_irq(pmu_device, 0); + int irq = *(int *)data; - cpumask_clear_cpu(smp_processor_id(), &cpu_pmu->active_irqs); disable_percpu_irq(irq); } @@ -103,7 +97,7 @@ irq = platform_get_irq(pmu_device, 0); if (irq >= 0 && irq_is_percpu(irq)) { - on_each_cpu(cpu_pmu_disable_percpu_irq, cpu_pmu, 1); + on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1); free_percpu_irq(irq, &percpu_pmu); } else { for (i = 0; i < irqs; ++i) { @@ -138,7 +132,7 @@ irq); return err; } - on_each_cpu(cpu_pmu_enable_percpu_irq, cpu_pmu, 1); + on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1); } else { for (i = 0; i < irqs; ++i) { err = 0; @@ -152,8 +146,8 @@ * continue. Otherwise, continue without this interrupt. */ if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { - pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, i); + pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n", + irq, i); continue; }
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 81ef686..fe972a2 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c
@@ -114,18 +114,13 @@ BUG(); } -static void null_restart(enum reboot_mode reboot_mode, const char *cmd) -{ -} - /* * Function pointers to optional machine specific functions */ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd) = null_restart; -EXPORT_SYMBOL_GPL(arm_pm_restart); +void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd); /* * This is our default idle handler. @@ -230,7 +225,10 @@ local_irq_disable(); smp_send_stop(); - arm_pm_restart(reboot_mode, cmd); + if (arm_pm_restart) + arm_pm_restart(reboot_mode, cmd); + else + do_kernel_restart(cmd); /* Give a grace period for failure to restart of 1s */ mdelay(1000); @@ -306,7 +304,6 @@ void show_regs(struct pt_regs * regs) { - printk("\n"); __show_regs(regs); dump_stack(); } @@ -334,6 +331,8 @@ memset(&tsk->thread.debug, 0, sizeof(struct debug_info)); memset(&thread->fpstate, 0, sizeof(union fp_state)); + flush_tls(); + thread_notify(THREAD_NOTIFY_FLUSH, thread); } @@ -472,19 +471,57 @@ const char *arch_vma_name(struct vm_area_struct *vma) { - return is_gate_vma(vma) ? "[vectors]" : - (vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ? - "[sigpage]" : NULL; + return is_gate_vma(vma) ? "[vectors]" : NULL; +} + +/* If possible, provide a placement hint at a random offset from the + * stack for the signal page. + */ +static unsigned long sigpage_addr(const struct mm_struct *mm, + unsigned int npages) +{ + unsigned long offset; + unsigned long first; + unsigned long last; + unsigned long addr; + unsigned int slots; + + first = PAGE_ALIGN(mm->start_stack); + + last = TASK_SIZE - (npages << PAGE_SHIFT); + + /* No room after stack? */ + if (first > last) + return 0; + + /* Just enough room? */ + if (first == last) + return first; + + slots = ((last - first) >> PAGE_SHIFT) + 1; + + offset = get_random_int() % slots; + + addr = first + (offset << PAGE_SHIFT); + + return addr; } static struct page *signal_page; extern struct page *get_signal_page(void); +static const struct vm_special_mapping sigpage_mapping = { + .name = "[sigpage]", + .pages = &signal_page, +}; + int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; unsigned long addr; - int ret; + unsigned long hint; + int ret = 0; if (!signal_page) signal_page = get_signal_page(); @@ -492,18 +529,23 @@ return -ENOMEM; down_write(&mm->mmap_sem); - addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0); + hint = sigpage_addr(mm, 1); + addr = get_unmapped_area(NULL, hint, PAGE_SIZE, 0, 0); if (IS_ERR_VALUE(addr)) { ret = addr; goto up_fail; } - ret = install_special_mapping(mm, addr, PAGE_SIZE, + vma = _install_special_mapping(mm, addr, PAGE_SIZE, VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, - &signal_page); + &sigpage_mapping); - if (ret == 0) - mm->context.sigpage = addr; + if (IS_ERR(vma)) { + ret = PTR_ERR(vma); + goto up_fail; + } + + mm->context.sigpage = addr; up_fail: up_write(&mm->mmap_sem);
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 0c27ed6..ef9119f 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c
@@ -933,8 +933,13 @@ current_thread_info()->syscall = scno; /* Do the secure computing check first; failures should be fast. */ - if (secure_computing(scno) == -1) +#ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER + if (secure_computing() == -1) return -1; +#else + /* XXX: remove this once OABI gets fixed */ + secure_computing_strict(scno); +#endif if (test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); @@ -944,8 +949,8 @@ if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, scno); - audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, - regs->ARM_r2, regs->ARM_r3); + audit_syscall_entry(scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, + regs->ARM_r3); return scno; }
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index fafedd8..98ea4b7 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c
@@ -59,15 +59,6 @@ #else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */ -#if defined(CONFIG_ARM_UNWIND) -#warning "TODO: return_address should use unwind tables" -#endif - -void *return_address(unsigned int level) -{ - return NULL; -} - #endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */ EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 84db893d..c031063 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c
@@ -133,6 +133,7 @@ u32 irq[3]; u32 abt[3]; u32 und[3]; + u32 fiq[3]; } ____cacheline_aligned; #ifndef CONFIG_CPU_V7M @@ -470,7 +471,10 @@ "msr cpsr_c, %5\n\t" "add r14, %0, %6\n\t" "mov sp, r14\n\t" - "msr cpsr_c, %7" + "msr cpsr_c, %7\n\t" + "add r14, %0, %8\n\t" + "mov sp, r14\n\t" + "msr cpsr_c, %9" : : "r" (stk), PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE), @@ -479,6 +483,8 @@ "I" (offsetof(struct stack, abt[0])), PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE), "I" (offsetof(struct stack, und[0])), + PLC (PSR_F_BIT | PSR_I_BIT | FIQ_MODE), + "I" (offsetof(struct stack, fiq[0])), PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE) : "r14"); #endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 9388a3d..13396d3 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c
@@ -95,6 +95,9 @@ { int ret; + if (!smp_ops.smp_boot_secondary) + return -ENOSYS; + /* * We need to tell the secondary core where to find * its stack and the page tables. @@ -113,7 +116,7 @@ /* * Now bring the CPU into our world. */ - ret = boot_secondary(cpu, idle); + ret = smp_ops.smp_boot_secondary(cpu, idle); if (ret == 0) { /* * CPU was successfully started, wait for it @@ -142,13 +145,6 @@ smp_ops.smp_init_cpus(); } -int boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - if (smp_ops.smp_boot_secondary) - return smp_ops.smp_boot_secondary(cpu, idle); - return -ENOSYS; -} - int platform_can_cpu_hotplug(void) { #ifdef CONFIG_HOTPLUG_CPU @@ -503,7 +499,7 @@ #ifdef CONFIG_IRQ_WORK void arch_irq_work_raise(void) { - if (is_smp()) + if (arch_irq_work_has_interrupt()) smp_cross_call(cpumask_of(smp_processor_id()), IPI_IRQ_WORK); } #endif @@ -650,7 +646,7 @@ udelay(1); if (num_online_cpus() > 1) - pr_warning("SMP: failed to stop secondary CPUs\n"); + pr_warn("SMP: failed to stop secondary CPUs\n"); } /*
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index dfc3213..9309021 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c
@@ -92,7 +92,7 @@ static void twd_timer_stop(void) { - struct clock_event_device *clk = __this_cpu_ptr(twd_evt); + struct clock_event_device *clk = raw_cpu_ptr(twd_evt); twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk); disable_percpu_irq(clk->irq); @@ -108,7 +108,7 @@ { twd_timer_rate = *((unsigned long *) new_rate); - clockevents_update_freq(__this_cpu_ptr(twd_evt), twd_timer_rate); + clockevents_update_freq(raw_cpu_ptr(twd_evt), twd_timer_rate); } static int twd_rate_change(struct notifier_block *nb, @@ -134,7 +134,7 @@ static int twd_clk_init(void) { - if (twd_evt && __this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) + if (twd_evt && raw_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return clk_notifier_register(twd_clk, &twd_clk_nb); return 0; @@ -153,7 +153,7 @@ { twd_timer_rate = clk_get_rate(twd_clk); - clockevents_update_freq(__this_cpu_ptr(twd_evt), twd_timer_rate); + clockevents_update_freq(raw_cpu_ptr(twd_evt), twd_timer_rate); } static int twd_cpufreq_transition(struct notifier_block *nb, @@ -179,7 +179,7 @@ static int twd_cpufreq_init(void) { - if (twd_evt && __this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) + if (twd_evt && raw_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); @@ -269,7 +269,7 @@ */ static void twd_timer_setup(void) { - struct clock_event_device *clk = __this_cpu_ptr(twd_evt); + struct clock_event_device *clk = raw_cpu_ptr(twd_evt); int cpu = smp_processor_id(); /*
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 67ca857..587fdfe 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c
@@ -142,14 +142,6 @@ while (1) { unsigned long temp; - /* - * Barrier required between accessing protected resource and - * releasing a lock for it. Legacy code might not have done - * this, and we cannot determine that this is not the case - * being emulated, so insert always. - */ - smp_mb(); - if (type == TYPE_SWPB) __user_swpb_asm(*data, address, res, temp); else @@ -162,13 +154,6 @@ } if (res == 0) { - /* - * Barrier also required between acquiring a lock for a - * protected resource and accessing the resource. Inserted for - * same reason as above. - */ - smp_mb(); - if (type == TYPE_SWPB) swpbcounter++; else
diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c index 7b8403b..80f0d69 100644 --- a/arch/arm/kernel/thumbee.c +++ b/arch/arm/kernel/thumbee.c
@@ -45,7 +45,7 @@ switch (cmd) { case THREAD_NOTIFY_FLUSH: - thread->thumbee_state = 0; + teehbr_write(0); break; case THREAD_NOTIFY_SWITCH: current_thread_info()->thumbee_state = teehbr_read();
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index e35d880..89cfdd6 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c
@@ -42,7 +42,7 @@ */ static DEFINE_PER_CPU(unsigned long, cpu_scale); -unsigned long arch_scale_freq_capacity(struct sched_domain *sd, int cpu) +unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu) { return per_cpu(cpu_scale, cpu); } @@ -166,7 +166,7 @@ set_capacity_scale(cpu, cpu_capacity(cpu) / middle_capacity); printk(KERN_INFO "CPU%u: update cpu_capacity %lu\n", - cpu, arch_scale_freq_capacity(NULL, cpu)); + cpu, arch_scale_cpu_capacity(NULL, cpu)); } #else
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index c8e4bb7..0c8b108 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c
@@ -25,6 +25,7 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/sched.h> +#include <linux/irq.h> #include <linux/atomic.h> #include <asm/cacheflush.h> @@ -460,10 +461,29 @@ arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6); } -asmlinkage void do_unexp_fiq (struct pt_regs *regs) +/* + * Handle FIQ similarly to NMI on x86 systems. + * + * The runtime environment for NMIs is extremely restrictive + * (NMIs can pre-empt critical sections meaning almost all locking is + * forbidden) meaning this default FIQ handling must only be used in + * circumstances where non-maskability improves robustness, such as + * watchdog or debug logic. + * + * This handler is not appropriate for general purpose use in drivers + * platform code and can be overrideen using set_fiq_handler. + */ +asmlinkage void __exception_irq_entry handle_fiq_as_nmi(struct pt_regs *regs) { - printk("Hmm. Unexpected FIQ received, but trying to continue\n"); - printk("You may have a hardware problem...\n"); + struct pt_regs *old_regs = set_irq_regs(regs); + + nmi_enter(); + + /* nop. FIQ handlers for special arch/arm features can be added here. */ + + nmi_exit(); + + set_irq_regs(old_regs); } /* @@ -581,7 +601,6 @@ #define NR(x) ((__ARM_NR_##x) - __ARM_NR_BASE) asmlinkage int arm_syscall(int no, struct pt_regs *regs) { - struct thread_info *thread = current_thread_info(); siginfo_t info; if ((no >> 16) != (__ARM_NR_BASE>> 16)) @@ -632,21 +651,7 @@ return regs->ARM_r0; case NR(set_tls): - thread->tp_value[0] = regs->ARM_r0; - if (tls_emu) - return 0; - if (has_tls_reg) { - asm ("mcr p15, 0, %0, c13, c0, 3" - : : "r" (regs->ARM_r0)); - } else { - /* - * User space must never try to access this directly. - * Expect your app to break eventually if you do so. - * The user helper at 0xffff0fe0 must be used instead. - * (see entry-armv.S for details) - */ - *((unsigned int *)0xffff0ff0) = regs->ARM_r0; - } + set_tls(regs->ARM_r0); return 0; #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index a61a1df..cbb85c5 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c
@@ -157,7 +157,7 @@ if (likely(start->addr_offset <= addr_prel31)) return start; else { - pr_warning("unwind: Unknown symbol address %08lx\n", addr); + pr_warn("unwind: Unknown symbol address %08lx\n", addr); return NULL; } } @@ -225,7 +225,7 @@ unsigned long ret; if (ctrl->entries <= 0) { - pr_warning("unwind: Corrupt unwind table\n"); + pr_warn("unwind: Corrupt unwind table\n"); return 0; } @@ -333,8 +333,8 @@ insn = (insn << 8) | unwind_get_byte(ctrl); mask = insn & 0x0fff; if (mask == 0) { - pr_warning("unwind: 'Refuse to unwind' instruction %04lx\n", - insn); + pr_warn("unwind: 'Refuse to unwind' instruction %04lx\n", + insn); return -URC_FAILURE; } @@ -357,8 +357,8 @@ unsigned long mask = unwind_get_byte(ctrl); if (mask == 0 || mask & 0xf0) { - pr_warning("unwind: Spare encoding %04lx\n", - (insn << 8) | mask); + pr_warn("unwind: Spare encoding %04lx\n", + (insn << 8) | mask); return -URC_FAILURE; } @@ -370,7 +370,7 @@ ctrl->vrs[SP] += 0x204 + (uleb128 << 2); } else { - pr_warning("unwind: Unhandled instruction %02lx\n", insn); + pr_warn("unwind: Unhandled instruction %02lx\n", insn); return -URC_FAILURE; } @@ -403,7 +403,7 @@ idx = unwind_find_idx(frame->pc); if (!idx) { - pr_warning("unwind: Index not found %08lx\n", frame->pc); + pr_warn("unwind: Index not found %08lx\n", frame->pc); return -URC_FAILURE; } @@ -422,8 +422,8 @@ /* only personality routine 0 supported in the index */ ctrl.insn = &idx->insn; else { - pr_warning("unwind: Unsupported personality routine %08lx in the index at %p\n", - idx->insn, idx); + pr_warn("unwind: Unsupported personality routine %08lx in the index at %p\n", + idx->insn, idx); return -URC_FAILURE; } @@ -435,8 +435,8 @@ ctrl.byte = 1; ctrl.entries = 1 + ((*ctrl.insn & 0x00ff0000) >> 16); } else { - pr_warning("unwind: Unsupported personality routine %08lx at %p\n", - *ctrl.insn, ctrl.insn); + pr_warn("unwind: Unsupported personality routine %08lx at %p\n", + *ctrl.insn, ctrl.insn); return -URC_FAILURE; }
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 6f57cb9..8e95aa4 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S
@@ -219,8 +219,8 @@ __data_loc = ALIGN(4); /* location in binary */ . = PAGE_OFFSET + TEXT_OFFSET; #else - __init_end = .; . = ALIGN(THREAD_SIZE); + __init_end = .; __data_loc = .; #endif
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index a99e0cd..9e193c8 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c
@@ -82,12 +82,12 @@ /** * kvm_arm_get_running_vcpus - get the per-CPU array of currently running vcpus. */ -struct kvm_vcpu __percpu **kvm_get_running_vcpus(void) +struct kvm_vcpu * __percpu *kvm_get_running_vcpus(void) { return &kvm_arm_running_vcpu; } -int kvm_arch_hardware_enable(void *garbage) +int kvm_arch_hardware_enable(void) { return 0; } @@ -97,27 +97,16 @@ return kvm_vcpu_exiting_guest_mode(vcpu) == IN_GUEST_MODE; } -void kvm_arch_hardware_disable(void *garbage) -{ -} - int kvm_arch_hardware_setup(void) { return 0; } -void kvm_arch_hardware_unsetup(void) -{ -} - void kvm_arch_check_processor_compat(void *rtn) { *(int *)rtn = 0; } -void kvm_arch_sync_events(struct kvm *kvm) -{ -} /** * kvm_arch_init_vm - initializes a VM data structure @@ -172,6 +161,8 @@ kvm->vcpus[i] = NULL; } } + + kvm_vgic_destroy(kvm); } int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) @@ -188,6 +179,7 @@ case KVM_CAP_ONE_REG: case KVM_CAP_ARM_PSCI: case KVM_CAP_ARM_PSCI_0_2: + case KVM_CAP_READONLY_MEM: r = 1; break; case KVM_CAP_COALESCED_MMIO: @@ -253,6 +245,7 @@ { kvm_mmu_free_memory_caches(vcpu); kvm_timer_vcpu_terminate(vcpu); + kvm_vgic_vcpu_destroy(vcpu); kmem_cache_free(kvm_vcpu_cache, vcpu); } @@ -268,26 +261,15 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) { - int ret; - /* Force users to call KVM_ARM_VCPU_INIT */ vcpu->arch.target = -1; - /* Set up VGIC */ - ret = kvm_vgic_vcpu_init(vcpu); - if (ret) - return ret; - /* Set up the timer */ kvm_timer_vcpu_init(vcpu); return 0; } -void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) -{ -} - void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) { vcpu->cpu = cpu; @@ -427,10 +409,10 @@ kvm_next_vmid++; /* update vttbr to be used with the new vmid */ - pgd_phys = virt_to_phys(kvm->arch.pgd); + pgd_phys = virt_to_phys(kvm_get_hwpgd(kvm)); + BUG_ON(pgd_phys & ~VTTBR_BADDR_MASK); vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK; - kvm->arch.vttbr = pgd_phys & VTTBR_BADDR_MASK; - kvm->arch.vttbr |= vmid; + kvm->arch.vttbr = pgd_phys | vmid; spin_unlock(&kvm_vmid_lock); } @@ -826,7 +808,8 @@ switch (action) { case CPU_STARTING: case CPU_STARTING_FROZEN: - cpu_init_hyp_mode(NULL); + if (__hyp_get_vectors() == hyp_default_vectors) + cpu_init_hyp_mode(NULL); break; }
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index 37a0fe1..7928dbd 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c
@@ -791,7 +791,7 @@ u32 level, ctype; if (val >= CSSELR_MAX) - return -ENOENT; + return false; /* Bottom bit is Instruction or Data bit. Next 3 bits are level. */ level = (val >> 1);
diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 813e492..cc0b787 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c
@@ -163,7 +163,7 @@ ret = copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id)); if (ret != 0) - return ret; + return -EFAULT; return kvm_arm_timer_set_reg(vcpu, reg->id, val); }
diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S index 98c8c5b..14d4883 100644 --- a/arch/arm/kvm/interrupts_head.S +++ b/arch/arm/kvm/interrupts_head.S
@@ -433,10 +433,17 @@ str r3, [r11, #VGIC_V2_CPU_HCR] str r4, [r11, #VGIC_V2_CPU_VMCR] str r5, [r11, #VGIC_V2_CPU_MISR] +#ifdef CONFIG_CPU_ENDIAN_BE8 + str r6, [r11, #(VGIC_V2_CPU_EISR + 4)] + str r7, [r11, #VGIC_V2_CPU_EISR] + str r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)] + str r9, [r11, #VGIC_V2_CPU_ELRSR] +#else str r6, [r11, #VGIC_V2_CPU_EISR] str r7, [r11, #(VGIC_V2_CPU_EISR + 4)] str r8, [r11, #VGIC_V2_CPU_ELRSR] str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)] +#endif str r10, [r11, #VGIC_V2_CPU_APR] /* Clear GICH_HCR */
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 16e7994..57a403a 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c
@@ -42,7 +42,7 @@ static unsigned long hyp_idmap_end; static phys_addr_t hyp_idmap_vector; -#define pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t)) +#define hyp_pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t)) #define kvm_pmd_huge(_x) (pmd_huge(_x) || pmd_trans_huge(_x)) @@ -134,7 +134,7 @@ } } while (pte++, addr += PAGE_SIZE, addr != end); - if (kvm_pte_table_empty(start_pte)) + if (kvm_pte_table_empty(kvm, start_pte)) clear_pmd_entry(kvm, pmd, start_addr); } @@ -158,7 +158,7 @@ } } while (pmd++, addr = next, addr != end); - if (kvm_pmd_table_empty(start_pmd)) + if (kvm_pmd_table_empty(kvm, start_pmd)) clear_pud_entry(kvm, pud, start_addr); } @@ -182,7 +182,7 @@ } } while (pud++, addr = next, addr != end); - if (kvm_pud_table_empty(start_pud)) + if (kvm_pud_table_empty(kvm, start_pud)) clear_pgd_entry(kvm, pgd, start_addr); } @@ -306,7 +306,7 @@ if (boot_hyp_pgd) { unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - free_pages((unsigned long)boot_hyp_pgd, pgd_order); + free_pages((unsigned long)boot_hyp_pgd, hyp_pgd_order); boot_hyp_pgd = NULL; } @@ -343,7 +343,7 @@ for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); - free_pages((unsigned long)hyp_pgd, pgd_order); + free_pages((unsigned long)hyp_pgd, hyp_pgd_order); hyp_pgd = NULL; } @@ -401,13 +401,46 @@ return 0; } +static int create_hyp_pud_mappings(pgd_t *pgd, unsigned long start, + unsigned long end, unsigned long pfn, + pgprot_t prot) +{ + pud_t *pud; + pmd_t *pmd; + unsigned long addr, next; + int ret; + + addr = start; + do { + pud = pud_offset(pgd, addr); + + if (pud_none_or_clear_bad(pud)) { + pmd = pmd_alloc_one(NULL, addr); + if (!pmd) { + kvm_err("Cannot allocate Hyp pmd\n"); + return -ENOMEM; + } + pud_populate(NULL, pud, pmd); + get_page(virt_to_page(pud)); + kvm_flush_dcache_to_poc(pud, sizeof(*pud)); + } + + next = pud_addr_end(addr, end); + ret = create_hyp_pmd_mappings(pud, addr, next, pfn, prot); + if (ret) + return ret; + pfn += (next - addr) >> PAGE_SHIFT; + } while (addr = next, addr != end); + + return 0; +} + static int __create_hyp_mappings(pgd_t *pgdp, unsigned long start, unsigned long end, unsigned long pfn, pgprot_t prot) { pgd_t *pgd; pud_t *pud; - pmd_t *pmd; unsigned long addr, next; int err = 0; @@ -416,22 +449,21 @@ end = PAGE_ALIGN(end); do { pgd = pgdp + pgd_index(addr); - pud = pud_offset(pgd, addr); - if (pud_none_or_clear_bad(pud)) { - pmd = pmd_alloc_one(NULL, addr); - if (!pmd) { - kvm_err("Cannot allocate Hyp pmd\n"); + if (pgd_none(*pgd)) { + pud = pud_alloc_one(NULL, addr); + if (!pud) { + kvm_err("Cannot allocate Hyp pud\n"); err = -ENOMEM; goto out; } - pud_populate(NULL, pud, pmd); - get_page(virt_to_page(pud)); - kvm_flush_dcache_to_poc(pud, sizeof(*pud)); + pgd_populate(NULL, pgd, pud); + get_page(virt_to_page(pgd)); + kvm_flush_dcache_to_poc(pgd, sizeof(*pgd)); } next = pgd_addr_end(addr, end); - err = create_hyp_pmd_mappings(pud, addr, next, pfn, prot); + err = create_hyp_pud_mappings(pgd, addr, next, pfn, prot); if (err) goto out; pfn += (next - addr) >> PAGE_SHIFT; @@ -521,6 +553,7 @@ */ int kvm_alloc_stage2_pgd(struct kvm *kvm) { + int ret; pgd_t *pgd; if (kvm->arch.pgd != NULL) { @@ -528,15 +561,38 @@ return -EINVAL; } - pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, S2_PGD_ORDER); + if (KVM_PREALLOC_LEVEL > 0) { + /* + * Allocate fake pgd for the page table manipulation macros to + * work. This is not used by the hardware and we have no + * alignment requirement for this allocation. + */ + pgd = (pgd_t *)kmalloc(PTRS_PER_S2_PGD * sizeof(pgd_t), + GFP_KERNEL | __GFP_ZERO); + } else { + /* + * Allocate actual first-level Stage-2 page table used by the + * hardware for Stage-2 page table walks. + */ + pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, S2_PGD_ORDER); + } + if (!pgd) return -ENOMEM; - memset(pgd, 0, PTRS_PER_S2_PGD * sizeof(pgd_t)); + ret = kvm_prealloc_hwpgd(kvm, pgd); + if (ret) + goto out_err; + kvm_clean_pgd(pgd); kvm->arch.pgd = pgd; - return 0; +out_err: + if (KVM_PREALLOC_LEVEL > 0) + kfree(pgd); + else + free_pages((unsigned long)pgd, S2_PGD_ORDER); + return ret; } /** @@ -572,19 +628,39 @@ return; unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE); - free_pages((unsigned long)kvm->arch.pgd, S2_PGD_ORDER); + kvm_free_hwpgd(kvm); + if (KVM_PREALLOC_LEVEL > 0) + kfree(kvm->arch.pgd); + else + free_pages((unsigned long)kvm->arch.pgd, S2_PGD_ORDER); kvm->arch.pgd = NULL; } +static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, + phys_addr_t addr) +{ + pgd_t *pgd; + pud_t *pud; + + pgd = kvm->arch.pgd + pgd_index(addr); + if (WARN_ON(pgd_none(*pgd))) { + if (!cache) + return NULL; + pud = mmu_memory_cache_alloc(cache); + pgd_populate(NULL, pgd, pud); + get_page(virt_to_page(pgd)); + } + + return pud_offset(pgd, addr); +} + static pmd_t *stage2_get_pmd(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, phys_addr_t addr) { - pgd_t *pgd; pud_t *pud; pmd_t *pmd; - pgd = kvm->arch.pgd + pgd_index(addr); - pud = pud_offset(pgd, addr); + pud = stage2_get_pud(kvm, cache, addr); if (pud_none(*pud)) { if (!cache) return NULL; @@ -630,7 +706,7 @@ pmd_t *pmd; pte_t *pte, old_pte; - /* Create stage-2 page table mapping - Level 1 */ + /* Create stage-2 page table mapping - Levels 0 and 1 */ pmd = stage2_get_pmd(kvm, cache, addr); if (!pmd) { /* @@ -675,7 +751,7 @@ * @size: The size of the mapping */ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, - phys_addr_t pa, unsigned long size) + phys_addr_t pa, unsigned long size, bool writable) { phys_addr_t addr, end; int ret = 0; @@ -688,7 +764,11 @@ for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) { pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE); - ret = mmu_topup_memory_cache(&cache, 2, 2); + if (writable) + kvm_set_s2pte_writable(&pte); + + ret = mmu_topup_memory_cache(&cache, KVM_MMU_CACHE_MIN_PAGES, + KVM_NR_MEM_OBJS); if (ret) goto out; spin_lock(&kvm->mmu_lock); @@ -746,22 +826,29 @@ return false; } +static bool kvm_is_write_fault(struct kvm_vcpu *vcpu) +{ + if (kvm_vcpu_trap_is_iabt(vcpu)) + return false; + + return kvm_vcpu_dabt_iswrite(vcpu); +} + static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, - struct kvm_memory_slot *memslot, + struct kvm_memory_slot *memslot, unsigned long hva, unsigned long fault_status) { int ret; bool write_fault, writable, hugetlb = false, force_pte = false; unsigned long mmu_seq; gfn_t gfn = fault_ipa >> PAGE_SHIFT; - unsigned long hva = gfn_to_hva(vcpu->kvm, gfn); struct kvm *kvm = vcpu->kvm; struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache; struct vm_area_struct *vma; pfn_t pfn; pgprot_t mem_type = PAGE_S2; - write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu)); + write_fault = kvm_is_write_fault(vcpu); if (fault_status == FSC_PERM && !write_fault) { kvm_err("Unexpected L2 read permission error\n"); return -EFAULT; @@ -770,6 +857,12 @@ /* Let's check if we will get back a huge page backed by hugetlbfs */ down_read(¤t->mm->mmap_sem); vma = find_vma_intersection(current->mm, hva, hva + 1); + if (unlikely(!vma)) { + kvm_err("Failed to find VMA for hva 0x%lx\n", hva); + up_read(¤t->mm->mmap_sem); + return -EFAULT; + } + if (is_vm_hugetlb_page(vma)) { hugetlb = true; gfn = (fault_ipa & PMD_MASK) >> PAGE_SHIFT; @@ -790,7 +883,8 @@ up_read(¤t->mm->mmap_sem); /* We need minimum second+third level pages */ - ret = mmu_topup_memory_cache(memcache, 2, KVM_NR_MEM_OBJS); + ret = mmu_topup_memory_cache(memcache, KVM_MMU_CACHE_MIN_PAGES, + KVM_NR_MEM_OBJS); if (ret) return ret; @@ -836,7 +930,7 @@ } coherent_cache_guest_page(vcpu, hva, PAGE_SIZE); ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, - mem_type == PAGE_S2_DEVICE); + pgprot_val(mem_type) == pgprot_val(PAGE_S2_DEVICE)); } @@ -863,7 +957,8 @@ unsigned long fault_status; phys_addr_t fault_ipa; struct kvm_memory_slot *memslot; - bool is_iabt; + unsigned long hva; + bool is_iabt, write_fault, writable; gfn_t gfn; int ret, idx; @@ -874,17 +969,22 @@ kvm_vcpu_get_hfar(vcpu), fault_ipa); /* Check the stage-2 fault is trans. fault or write fault */ - fault_status = kvm_vcpu_trap_get_fault(vcpu); + fault_status = kvm_vcpu_trap_get_fault_type(vcpu); if (fault_status != FSC_FAULT && fault_status != FSC_PERM) { - kvm_err("Unsupported fault status: EC=%#x DFCS=%#lx\n", - kvm_vcpu_trap_get_class(vcpu), fault_status); + kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n", + kvm_vcpu_trap_get_class(vcpu), + (unsigned long)kvm_vcpu_trap_get_fault(vcpu), + (unsigned long)kvm_vcpu_get_hsr(vcpu)); return -EFAULT; } idx = srcu_read_lock(&vcpu->kvm->srcu); gfn = fault_ipa >> PAGE_SHIFT; - if (!kvm_is_visible_gfn(vcpu->kvm, gfn)) { + memslot = gfn_to_memslot(vcpu->kvm, gfn); + hva = gfn_to_hva_memslot_prot(memslot, gfn, &writable); + write_fault = kvm_is_write_fault(vcpu); + if (kvm_is_error_hva(hva) || (write_fault && !writable)) { if (is_iabt) { /* Prefetch Abort on I/O address */ kvm_inject_pabt(vcpu, kvm_vcpu_get_hfar(vcpu)); @@ -892,13 +992,6 @@ goto out_unlock; } - if (fault_status != FSC_FAULT) { - kvm_err("Unsupported fault status on io memory: %#lx\n", - fault_status); - ret = -EFAULT; - goto out_unlock; - } - /* * The IPA is reported as [MAX:12], so we need to * complement it with the bottom 12 bits from the @@ -910,9 +1003,10 @@ goto out_unlock; } - memslot = gfn_to_memslot(vcpu->kvm, gfn); + /* Userspace should not be able to register out-of-bounds IPAs */ + VM_BUG_ON(fault_ipa >= KVM_PHYS_SIZE); - ret = user_mem_abort(vcpu, fault_ipa, memslot, fault_status); + ret = user_mem_abort(vcpu, fault_ipa, memslot, hva, fault_status); if (ret == 0) ret = 1; out_unlock: @@ -1068,8 +1162,8 @@ (unsigned long)phys_base); } - hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order); - boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order); + hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order); + boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order); if (!hyp_pgd || !boot_hyp_pgd) { kvm_err("Hyp mode PGD not allocated\n"); @@ -1122,13 +1216,6 @@ const struct kvm_memory_slot *old, enum kvm_mr_change change) { - gpa_t gpa = old->base_gfn << PAGE_SHIFT; - phys_addr_t size = old->npages << PAGE_SHIFT; - if (change == KVM_MR_DELETE || change == KVM_MR_MOVE) { - spin_lock(&kvm->mmu_lock); - unmap_stage2_range(kvm, gpa, size); - spin_unlock(&kvm->mmu_lock); - } } int kvm_arch_prepare_memory_region(struct kvm *kvm, @@ -1136,7 +1223,77 @@ struct kvm_userspace_memory_region *mem, enum kvm_mr_change change) { - return 0; + hva_t hva = mem->userspace_addr; + hva_t reg_end = hva + mem->memory_size; + bool writable = !(mem->flags & KVM_MEM_READONLY); + int ret = 0; + + if (change != KVM_MR_CREATE && change != KVM_MR_MOVE) + return 0; + + /* + * Prevent userspace from creating a memory region outside of the IPA + * space addressable by the KVM guest IPA space. + */ + if (memslot->base_gfn + memslot->npages >= + (KVM_PHYS_SIZE >> PAGE_SHIFT)) + return -EFAULT; + + /* + * A memory region could potentially cover multiple VMAs, and any holes + * between them, so iterate over all of them to find out if we can map + * any of them right now. + * + * +--------------------------------------------+ + * +---------------+----------------+ +----------------+ + * | : VMA 1 | VMA 2 | | VMA 3 : | + * +---------------+----------------+ +----------------+ + * | memory region | + * +--------------------------------------------+ + */ + do { + struct vm_area_struct *vma = find_vma(current->mm, hva); + hva_t vm_start, vm_end; + + if (!vma || vma->vm_start >= reg_end) + break; + + /* + * Mapping a read-only VMA is only allowed if the + * memory region is configured as read-only. + */ + if (writable && !(vma->vm_flags & VM_WRITE)) { + ret = -EPERM; + break; + } + + /* + * Take the intersection of this VMA with the memory region + */ + vm_start = max(hva, vma->vm_start); + vm_end = min(reg_end, vma->vm_end); + + if (vma->vm_flags & VM_PFNMAP) { + gpa_t gpa = mem->guest_phys_addr + + (vm_start - mem->userspace_addr); + phys_addr_t pa = (vma->vm_pgoff << PAGE_SHIFT) + + vm_start - vma->vm_start; + + ret = kvm_phys_addr_ioremap(kvm, gpa, pa, + vm_end - vm_start, + writable); + if (ret) + break; + } + hva = vm_end; + } while (hva < reg_end); + + if (ret) { + spin_lock(&kvm->mmu_lock); + unmap_stage2_range(kvm, mem->guest_phys_addr, mem->memory_size); + spin_unlock(&kvm->mmu_lock); + } + return ret; } void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free, @@ -1161,4 +1318,10 @@ void kvm_arch_flush_shadow_memslot(struct kvm *kvm, struct kvm_memory_slot *slot) { + gpa_t gpa = slot->base_gfn << PAGE_SHIFT; + phys_addr_t size = slot->npages << PAGE_SHIFT; + + spin_lock(&kvm->mmu_lock); + unmap_stage2_range(kvm, gpa, size); + spin_unlock(&kvm->mmu_lock); }
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 9386000..8ecfd15 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S
@@ -80,7 +80,7 @@ ENDPROC(__get_user_8) #ifdef __ARMEB__ -ENTRY(__get_user_lo8) +ENTRY(__get_user_32t_8) check_uaccess r0, 8, r1, r2, __get_user_bad #ifdef CONFIG_CPU_USE_DOMAINS add r0, r0, #4 @@ -90,7 +90,37 @@ #endif mov r0, #0 ret lr -ENDPROC(__get_user_lo8) +ENDPROC(__get_user_32t_8) + +ENTRY(__get_user_64t_1) + check_uaccess r0, 1, r1, r2, __get_user_bad8 +8: TUSER(ldrb) r3, [r0] + mov r0, #0 + ret lr +ENDPROC(__get_user_64t_1) + +ENTRY(__get_user_64t_2) + check_uaccess r0, 2, r1, r2, __get_user_bad8 +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +9: ldrbt r3, [r0], #1 +10: ldrbt rb, [r0], #0 +#else +rb .req r0 +9: ldrb r3, [r0] +10: ldrb rb, [r0, #1] +#endif + orr r3, rb, r3, lsl #8 + mov r0, #0 + ret lr +ENDPROC(__get_user_64t_2) + +ENTRY(__get_user_64t_4) + check_uaccess r0, 4, r1, r2, __get_user_bad8 +11: TUSER(ldr) r3, [r0] + mov r0, #0 + ret lr +ENDPROC(__get_user_64t_4) #endif __get_user_bad8: @@ -111,5 +141,9 @@ .long 6b, __get_user_bad8 #ifdef __ARMEB__ .long 7b, __get_user_bad + .long 8b, __get_user_bad8 + .long 9b, __get_user_bad8 + .long 10b, __get_user_bad8 + .long 11b, __get_user_bad8 #endif .popsection
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 6cc6f7a..0e6d548 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig
@@ -12,6 +12,9 @@ config HAVE_AT91_DBGU1 bool +config HAVE_AT91_DBGU2 + bool + config AT91_USE_OLD_CLK bool @@ -28,36 +31,33 @@ bool default AT91_PMC_UNIT && AT91_USE_OLD_CLK -config AT91_SAM9_ALT_RESET +config OLD_IRQ_AT91 bool - default !ARCH_AT91X40 - -config AT91_SAM9G45_RESET - bool - default !ARCH_AT91X40 - -config AT91_SAM9_TIME - bool + select MULTI_IRQ_HANDLER + select SPARSE_IRQ config HAVE_AT91_SMD bool +config HAVE_AT91_H32MX + bool + config SOC_AT91SAM9 bool - select AT91_SAM9_TIME + select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 select CPU_ARM926T select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ + select MEMORY if USE_OF + select ATMEL_SDRAMC if USE_OF config SOC_SAMA5 bool - select AT91_SAM9_TIME + select ATMEL_AIC5_IRQ select CPU_V7 select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select USE_OF + select MEMORY + select ATMEL_SDRAMC menu "Atmel AT91 System-on-Chip" @@ -70,8 +70,7 @@ depends on !MMU select CPU_ARM7TDMI select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ + select OLD_IRQ_AT91 help Select this if you are using one of Atmel's AT91X40 SoC. @@ -103,16 +102,30 @@ help Select this if you are using one of Atmel's SAMA5D3 family SoC. This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36. + +config SOC_SAMA5D4 + bool "SAMA5D4 family" + select SOC_SAMA5 + select HAVE_AT91_DBGU2 + select CLKSRC_MMIO + select CACHE_L2X0 + select CACHE_PL310 + select HAVE_FB_ATMEL + select HAVE_AT91_UTMI + select HAVE_AT91_SMD + select HAVE_AT91_USB_CLK + select HAVE_AT91_H32MX + help + Select this if you are using one of Atmel's SAMA5D4 family SoC. endif if SOC_SAM_V4_V5 config SOC_AT91RM9200 bool "AT91RM9200" + select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 select CPU_ARM920T select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select HAVE_AT91_USB_CLK config SOC_AT91SAM9260
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 44ace32..d8e8821 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -14,31 +14,37 @@ bool "AT91RM9200" select SOC_AT91RM9200 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9263 bool "AT91SAM9263" select SOC_AT91SAM9263 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 endchoice @@ -132,12 +138,6 @@ bool "eco920" help Select this if you are using the eco920 board - -config MACH_RSI_EWS - bool "RSI Embedded Webserver" - depends on ARCH_AT91RM9200 - help - Select this if you are using RSIs EWS board. endif # ---------------------------------------------------------- @@ -212,12 +212,6 @@ Select this if you are using a Eukrea Electromatique's CPU9G20 Board <http://www.eukrea.com/> -config MACH_ACMENETUSFOXG20 - bool "Acme Systems srl FOX Board G20" - help - Select this if you are using Acme Systems - FOX Board G20 <http://www.acmesystems.it> - config MACH_PORTUXG20 bool "taskit PortuxG20" help
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 78e9cec..1b9ae02 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile
@@ -2,15 +2,10 @@ # Makefile for the linux kernel. # -obj-y := irq.o gpio.o setup.o sysirq_mask.o -obj-m := -obj-n := -obj- := +obj-y := gpio.o setup.o sysirq_mask.o +obj-$(CONFIG_OLD_IRQ_AT91) += irq.o obj-$(CONFIG_OLD_CLK_AT91) += clock.o -obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o -obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o -obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support @@ -23,6 +18,7 @@ obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o +obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o @@ -46,7 +42,6 @@ obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o obj-$(CONFIG_MACH_ECO920) += board-eco920.o -obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o @@ -69,7 +64,6 @@ # AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o -obj-$(CONFIG_MACH_ACMENETUSFOXG20) += board-foxg20.o obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
diff --git a/arch/arm/mach-at91/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h deleted file mode 100644 index a600e69..0000000 --- a/arch/arm/mach-at91/at91_rstc.h +++ /dev/null
@@ -1,53 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_rstc.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Reset Controller (RSTC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RSTC_H -#define AT91_RSTC_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_rstc_base; - -#define at91_rstc_read(field) \ - __raw_readl(at91_rstc_base + field) - -#define at91_rstc_write(field, value) \ - __raw_writel(value, at91_rstc_base + field) -#else -.extern at91_rstc_base -#endif - -#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ -#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ -#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ -#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ -#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ -#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ -#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ -#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) -#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) -#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) -#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) -#define AT91_RSTC_RSTTYP_USER (4 << 8) -#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ -#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ - -#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ -#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ -#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ -#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ - -#endif
diff --git a/arch/arm/mach-at91/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h deleted file mode 100644 index 9e29f31..0000000 --- a/arch/arm/mach-at91/at91_shdwc.h +++ /dev/null
@@ -1,50 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_shdwc.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Shutdown Controller (SHDWC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SHDWC_H -#define AT91_SHDWC_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_shdwc_base; - -#define at91_shdwc_read(field) \ - __raw_readl(at91_shdwc_base + field) - -#define at91_shdwc_write(field, value) \ - __raw_writel(value, at91_shdwc_base + field) -#endif - -#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ -#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */ -#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */ -#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */ -#define AT91_SHDW_WKMODE0_NONE 0 -#define AT91_SHDW_WKMODE0_HIGH 1 -#define AT91_SHDW_WKMODE0_LOW 2 -#define AT91_SHDW_WKMODE0_ANYLEVEL 3 -#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */ -#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */ -#define AT91_SHDW_CPTWK0_(x) ((x) << 4) -#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ -#define AT91_SHDW_RTCWKEN (1 << 17) /* Real Time Clock Wake-up Enable */ - -#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */ -#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ -#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ -#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ - -#endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 3477ba9..aab1f96 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -24,7 +25,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -342,8 +342,6 @@ static void __init at91sam9260_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); @@ -354,7 +352,6 @@ static void __init at91sam9260_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT); @@ -362,6 +359,45 @@ at91_gpio_init(at91sam9260_gpio, 3); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_RSTC, + .end = AT91SAM9260_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_BASE_SDRAMC, + .end = AT91SAM9260_BASE_SDRAMC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_SHDWC, + .end = AT91SAM9260_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9260_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -404,6 +440,11 @@ 0, /* Advanced Interrupt Controller */ }; +static void __init at91sam9260_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, @@ -411,5 +452,7 @@ | (1 << AT91SAM9260_ID_IRQ2), .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, + .register_devices = at91sam9260_register_devices, .init = at91sam9260_initialize, + .init_time = at91sam9260_init_time, AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index fb164a5..a8bd359 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -23,7 +24,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -301,8 +301,6 @@ static void __init at91sam9261_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9261_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); @@ -313,7 +311,6 @@ static void __init at91sam9261_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT); @@ -321,6 +318,45 @@ at91_gpio_init(at91sam9261_gpio, 3); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_RSTC, + .end = AT91SAM9261_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_BASE_SDRAMC, + .end = AT91SAM9261_BASE_SDRAMC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SHDWC, + .end = AT91SAM9261_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9261_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -363,6 +399,11 @@ 0, /* Advanced Interrupt Controller */ }; +static void __init at91sam9261_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, @@ -370,5 +411,7 @@ | (1 << AT91SAM9261_ID_IRQ2), .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, + .register_devices = at91sam9261_register_devices, .init = at91sam9261_initialize, + .init_time = at91sam9261_init_time, AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 810fa5f..fbff228 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -22,7 +23,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -321,8 +321,6 @@ static void __init at91sam9263_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9263_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512); at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512); at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); @@ -335,7 +333,6 @@ static void __init at91sam9263_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0); at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1); @@ -344,6 +341,45 @@ at91_gpio_init(at91sam9263_gpio, 5); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_RSTC, + .end = AT91SAM9263_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_BASE_SDRAMC0, + .end = AT91SAM9263_BASE_SDRAMC0 + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SHDWC, + .end = AT91SAM9263_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9263_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -386,11 +422,18 @@ 0, /* Advanced Interrupt Controller (IRQ1) */ }; +static void __init at91sam9263_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1), .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, + .register_devices = at91sam9263_register_devices, .init = at91sam9263_initialize, + .init_time = at91sam9263_init_time, AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c deleted file mode 100644 index 0a9e2fc..0000000 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ /dev/null
@@ -1,294 +0,0 @@ -/* - * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x - * - * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France - * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France - * Converted to ClockSource/ClockEvents by David Brownell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> -#include <mach/hardware.h> - -#define AT91_PIT_MR 0x00 /* Mode Register */ -#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ -#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ -#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ - -#define AT91_PIT_SR 0x04 /* Status Register */ -#define AT91_PIT_PITS (1 << 0) /* Timer Status */ - -#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ -#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ -#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ -#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ - -#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) -#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) - -static u32 pit_cycle; /* write-once */ -static u32 pit_cnt; /* access only w/system irq blocked */ -static void __iomem *pit_base_addr __read_mostly; -static struct clk *mck; - -static inline unsigned int pit_read(unsigned int reg_offset) -{ - return __raw_readl(pit_base_addr + reg_offset); -} - -static inline void pit_write(unsigned int reg_offset, unsigned long value) -{ - __raw_writel(value, pit_base_addr + reg_offset); -} - -/* - * Clocksource: just a monotonic counter of MCK/16 cycles. - * We don't care whether or not PIT irqs are enabled. - */ -static cycle_t read_pit_clk(struct clocksource *cs) -{ - unsigned long flags; - u32 elapsed; - u32 t; - - raw_local_irq_save(flags); - elapsed = pit_cnt; - t = pit_read(AT91_PIT_PIIR); - raw_local_irq_restore(flags); - - elapsed += PIT_PICNT(t) * pit_cycle; - elapsed += PIT_CPIV(t); - return elapsed; -} - -static struct clocksource pit_clk = { - .name = "pit", - .rating = 175, - .read = read_pit_clk, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - - -/* - * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16) - */ -static void -pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* update clocksource counter */ - pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR)); - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN - | AT91_PIT_PITIEN); - break; - case CLOCK_EVT_MODE_ONESHOT: - BUG(); - /* FALLTHROUGH */ - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - /* disable irq, leaving the clocksource active */ - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static void at91sam926x_pit_suspend(struct clock_event_device *cedev) -{ - /* Disable timer */ - pit_write(AT91_PIT_MR, 0); -} - -static void at91sam926x_pit_reset(void) -{ - /* Disable timer and irqs */ - pit_write(AT91_PIT_MR, 0); - - /* Clear any pending interrupts, wait for PIT to stop counting */ - while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0) - cpu_relax(); - - /* Start PIT but don't enable IRQ */ - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); -} - -static void at91sam926x_pit_resume(struct clock_event_device *cedev) -{ - at91sam926x_pit_reset(); -} - -static struct clock_event_device pit_clkevt = { - .name = "pit", - .features = CLOCK_EVT_FEAT_PERIODIC, - .shift = 32, - .rating = 100, - .set_mode = pit_clkevt_mode, - .suspend = at91sam926x_pit_suspend, - .resume = at91sam926x_pit_resume, -}; - - -/* - * IRQ handler for the timer. - */ -static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) -{ - /* - * irqs should be disabled here, but as the irq is shared they are only - * guaranteed to be off if the timer irq is registered first. - */ - WARN_ON_ONCE(!irqs_disabled()); - - /* The PIT interrupt may be disabled, and is shared */ - if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC) - && (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) { - unsigned nr_ticks; - - /* Get number of ticks performed before irq, and ack it */ - nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR)); - do { - pit_cnt += pit_cycle; - pit_clkevt.event_handler(&pit_clkevt); - nr_ticks--; - } while (nr_ticks); - - return IRQ_HANDLED; - } - - return IRQ_NONE; -} - -static struct irqaction at91sam926x_pit_irq = { - .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91sam926x_pit_interrupt, - .irq = NR_IRQS_LEGACY + AT91_ID_SYS, -}; - -#ifdef CONFIG_OF -static struct of_device_id pit_timer_ids[] = { - { .compatible = "atmel,at91sam9260-pit" }, - { /* sentinel */ } -}; - -static int __init of_at91sam926x_pit_init(void) -{ - struct device_node *np; - int ret; - - np = of_find_matching_node(NULL, pit_timer_ids); - if (!np) - goto err; - - pit_base_addr = of_iomap(np, 0); - if (!pit_base_addr) - goto node_err; - - mck = of_clk_get(np, 0); - - /* Get the interrupts property */ - ret = irq_of_parse_and_map(np, 0); - if (!ret) { - pr_crit("AT91: PIT: Unable to get IRQ from DT\n"); - if (!IS_ERR(mck)) - clk_put(mck); - goto ioremap_err; - } - at91sam926x_pit_irq.irq = ret; - - of_node_put(np); - - return 0; - -ioremap_err: - iounmap(pit_base_addr); -node_err: - of_node_put(np); -err: - return -EINVAL; -} -#else -static int __init of_at91sam926x_pit_init(void) -{ - return -EINVAL; -} -#endif - -/* - * Set up both clocksource and clockevent support. - */ -void __init at91sam926x_pit_init(void) -{ - unsigned long pit_rate; - unsigned bits; - int ret; - - mck = ERR_PTR(-ENOENT); - - /* For device tree enabled device: initialize here */ - of_at91sam926x_pit_init(); - - /* - * Use our actual MCK to figure out how many MCK/16 ticks per - * 1/HZ period (instead of a compile-time constant LATCH). - */ - if (IS_ERR(mck)) - mck = clk_get(NULL, "mck"); - - if (IS_ERR(mck)) - panic("AT91: PIT: Unable to get mck clk\n"); - pit_rate = clk_get_rate(mck) / 16; - pit_cycle = (pit_rate + HZ/2) / HZ; - WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0); - - /* Initialize and enable the timer */ - at91sam926x_pit_reset(); - - /* - * Register clocksource. The high order bits of PIV are unused, - * so this isn't a 32-bit counter unless we get clockevent irqs. - */ - bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */; - pit_clk.mask = CLOCKSOURCE_MASK(bits); - clocksource_register_hz(&pit_clk, pit_rate); - - /* Set up irq handler */ - ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq); - if (ret) - pr_crit("AT91: PIT: Unable to setup IRQ\n"); - - /* Set up and register clockevents */ - pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift); - pit_clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&pit_clkevt); -} - -void __init at91sam926x_ioremap_pit(u32 addr) -{ -#if defined(CONFIG_OF) - struct device_node *np = - of_find_matching_node(NULL, pit_timer_ids); - - if (np) { - of_node_put(np); - return; - } -#endif - pit_base_addr = ioremap(addr, 16); - - if (!pit_base_addr) - panic("Impossible to ioremap PIT\n"); -}
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S deleted file mode 100644 index f039538..0000000 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ /dev/null
@@ -1,40 +0,0 @@ -/* - * reset AT91SAM9G20 as per errata - * - * (C) BitBox Ltd 2010 - * - * unless the SDRAM is cleanly shutdown before we hit the - * reset register it can be left driving the data bus and - * killing the chance of a subsequent boot from NAND - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/linkage.h> -#include <mach/hardware.h> -#include <mach/at91_ramc.h> -#include "at91_rstc.h" - - .arm - - .globl at91sam9_alt_restart - -at91sam9_alt_restart: ldr r0, =at91_ramc_base @ preload constants - ldr r0, [r0] - ldr r4, =at91_rstc_base - ldr r1, [r4] - - mov r2, #1 - mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN - ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST - - .balign 32 @ align to cache line - - str r2, [r0, #AT91_SDRAMC_TR] @ disable SDRAM access - str r3, [r0, #AT91_SDRAMC_LPR] @ power down SDRAM - str r4, [r1, #AT91_RSTC_CR] @ reset processor - - b .
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 9d45496..405427e 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/dma-mapping.h> #include <linux/clk/at91_pmc.h> +#include <linux/platform_device.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -371,8 +372,6 @@ static void __init at91sam9g45_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512); at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512); at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); @@ -384,7 +383,6 @@ static void __init at91sam9g45_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9g45_restart; at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC); at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT); @@ -393,6 +391,50 @@ at91_gpio_init(at91sam9g45_gpio, 5); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_RSTC, + .end = AT91SAM9G45_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_BASE_DDRSDRC1, + .end = AT91SAM9G45_BASE_DDRSDRC1 + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = AT91SAM9G45_BASE_DDRSDRC0, + .end = AT91SAM9G45_BASE_DDRSDRC0 + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9g45-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_SHDWC, + .end = AT91SAM9G45_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9g45_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -435,11 +477,18 @@ 0, /* Advanced Interrupt Controller (IRQ0) */ }; +static void __init at91sam9g45_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .extern_irq = (1 << AT91SAM9G45_ID_IRQ0), .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, + .register_devices = at91sam9g45_register_devices, .init = at91sam9g45_initialize, + .init_time = at91sam9g45_init_time, AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S deleted file mode 100644 index c40c1e2..0000000 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ /dev/null
@@ -1,45 +0,0 @@ -/* - * reset AT91SAM9G45 as per errata - * - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com> - * - * unless the SDRAM is cleanly shutdown before we hit the - * reset register it can be left driving the data bus and - * killing the chance of a subsequent boot from NAND - * - * GPLv2 Only - */ - -#include <linux/linkage.h> -#include <mach/hardware.h> -#include <mach/at91_ramc.h> -#include "at91_rstc.h" - .arm - -/* - * at91_ramc_base is an array void* - * init at NULL if only one DDR controler is present in or DT - */ - .globl at91sam9g45_restart - -at91sam9g45_restart: - ldr r5, =at91_ramc_base @ preload constants - ldr r0, [r5] - ldr r5, [r5, #4] @ ddr1 - cmp r5, #0 - ldr r4, =at91_rstc_base - ldr r1, [r4] - - mov r2, #1 - mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN - ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST - - .balign 32 @ align to cache line - - strne r2, [r5, #AT91_DDRSDRC_RTR] @ disable DDR1 access - strne r3, [r5, #AT91_DDRSDRC_LPR] @ power down DDR1 - str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access - str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 - str r4, [r1, #AT91_RSTC_CR] @ reset processor - - b .
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 878d501..f553e4e 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,6 +10,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -23,7 +24,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -311,8 +311,6 @@ static void __init at91sam9rl_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); @@ -323,7 +321,6 @@ static void __init at91sam9rl_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC); at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT); @@ -332,6 +329,45 @@ at91_gpio_init(at91sam9rl_gpio, 4); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_RSTC, + .end = AT91SAM9RL_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_BASE_SDRAMC, + .end = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_SHDWC, + .end = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9rl_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -374,6 +410,11 @@ 0, /* Advanced Interrupt Controller */ }; +static void __init at91sam9rl_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, @@ -382,5 +423,7 @@ #if defined(CONFIG_OLD_CLK_AT91) .register_clocks = at91sam9rl_register_clocks, #endif + .register_devices = at91sam9rl_register_devices, .init = at91sam9rl_initialize, + .init_time = at91sam9rl_init_time, AT91_SOC_END
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 597c649..e76e35c 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -167,6 +167,8 @@ static void __init afeb9260_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -211,7 +213,7 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = afeb9260_init_early,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index a30502c..ae827dd 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c
@@ -170,6 +170,8 @@ static void __init cam60_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -188,7 +190,7 @@ MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = cam60_init_early,
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 2037f78..731c831 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -322,6 +322,8 @@ static void __init cpu9krea_board_init(void) { + at91_register_devices(); + /* NOR */ cpu9krea_add_device_nor(); /* Serial */ @@ -375,7 +377,7 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = cpu9krea_init_early,
diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c index f4b6e91..226563f 100644 --- a/arch/arm/mach-at91/board-dt-rm9200.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c
@@ -25,17 +25,6 @@ #include "at91_aic.h" #include "generic.h" - -static const struct of_device_id irq_of_match[] __initconst = { - { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { /*sentinel*/ } -}; - -static void __init at91rm9200_dt_init_irq(void) -{ - of_irq_init(irq_of_match); -} - static void __init at91rm9200_dt_timer_init(void) { #if defined(CONFIG_COMMON_CLK) @@ -52,8 +41,6 @@ DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") .init_time = at91rm9200_dt_timer_init, .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, .init_early = at91rm9200_dt_initialize, - .init_irq = at91rm9200_dt_init_irq, .dt_compat = at91rm9200_dt_board_compat, MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c index 575b0be..d3048cc 100644 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -25,26 +25,6 @@ #include "board.h" #include "generic.h" - -static void __init sam9_dt_timer_init(void) -{ -#if defined(CONFIG_COMMON_CLK) - of_clk_init(NULL); -#endif - at91sam926x_pit_init(); -} - -static const struct of_device_id irq_of_match[] __initconst = { - - { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { /*sentinel*/ } -}; - -static void __init at91_dt_init_irq(void) -{ - of_irq_init(irq_of_match); -} - static const char *at91_dt_board_compat[] __initdata = { "atmel,at91sam9", NULL @@ -52,10 +32,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ - .init_time = sam9_dt_timer_init, .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, - .init_irq = at91_dt_init_irq, .dt_compat = at91_dt_board_compat, MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 075ec05..129e291 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -27,64 +27,34 @@ #include "at91_aic.h" #include "generic.h" -static void __init sama5_dt_timer_init(void) -{ -#if defined(CONFIG_COMMON_CLK) - of_clk_init(NULL); -#endif - at91sam926x_pit_init(); -} - -static const struct of_device_id irq_of_match[] __initconst = { - - { .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init }, - { /*sentinel*/ } -}; - -static void __init at91_dt_init_irq(void) -{ - of_irq_init(irq_of_match); -} - -static int ksz9021rn_phy_fixup(struct phy_device *phy) -{ - int value; - - /* Set delay values */ - value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0xF2F4; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0x2222; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - - return 0; -} - static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d3xcm") && - IS_ENABLED(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char *sama5_dt_board_compat[] __initdata = { +static const char *sama5_dt_board_compat[] __initconst = { "atmel,sama5", NULL }; DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)") /* Maintainer: Atmel */ - .init_time = sama5_dt_timer_init, .map_io = at91_map_io, - .handle_irq = at91_aic5_handle_irq, .init_early = at91_dt_initialize, - .init_irq = at91_dt_init_irq, .init_machine = sama5_dt_device_init, .dt_compat = sama5_dt_board_compat, MACHINE_END + +static const char *sama5_alt_dt_board_compat[] __initconst = { + "atmel,sama5d4", + NULL +}; + +DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)") + /* Maintainer: Atmel */ + .map_io = at91_alt_map_io, + .init_early = at91_dt_initialize, + .init_machine = sama5_dt_device_init, + .dt_compat = sama5_alt_dt_board_compat, + .l2c_aux_mask = ~0UL, +MACHINE_END
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 68f1ab6..a6aa4a2 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c
@@ -138,6 +138,8 @@ static void __init flexibity_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -160,7 +162,7 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = flexibity_init_early,
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c deleted file mode 100644 index 8b22c60..0000000 --- a/arch/arm/mach-at91/board-foxg20.c +++ /dev/null
@@ -1,272 +0,0 @@ -/* - * Copyright (C) 2005 SAN People - * Copyright (C) 2008 Atmel - * Copyright (C) 2010 Lee McLoughlin - lee@lmmrtech.com - * Copyright (C) 2010 Sergio Tanzilli - tanzilli@acmesystems.it - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/at73c213.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/clk.h> -#include <linux/w1-gpio.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - -/* - * The FOX Board G20 hardware comes as the "Netus G20" board with - * just the cpu, ram, dataflash and two header connectors. - * This is plugged into the FOX Board which provides the ethernet, - * usb, rtc, leds, switch, ... - * - * For more info visit: http://www.acmesystems.it/foxg20 - */ - - -static void __init foxg20_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata foxg20_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata foxg20_udc_data = { - .vbus_pin = AT91_PIN_PC6, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * SPI devices. - */ -static struct spi_board_info foxg20_spi_devices[] = { -#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) - { - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata foxg20_macb_data = { - .phy_irq_pin = AT91_PIN_PA7, - .is_rmii = 1, -}; - -/* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -static struct mci_platform_data __initdata foxg20_mci0_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = -EINVAL, - .wp_pin = -EINVAL, - }, -}; - - -/* - * LEDs - */ -static struct gpio_led foxg20_leds[] = { - { /* user led, red */ - .name = "user_led", - .gpio = AT91_PIN_PC7, - .active_low = 0, - .default_trigger = "heartbeat", - }, -}; - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button foxg20_buttons[] = { - { - .gpio = AT91_PIN_PC4, - .code = BTN_1, - .desc = "Button 1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data foxg20_button_data = { - .buttons = foxg20_buttons, - .nbuttons = ARRAY_SIZE(foxg20_buttons), -}; - -static struct platform_device foxg20_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &foxg20_button_data, - } -}; - -static void __init foxg20_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PC4, 1); /* btn1 */ - at91_set_deglitch(AT91_PIN_PC4, 1); - - platform_device_register(&foxg20_button_device); -} -#else -static void __init foxg20_add_device_buttons(void) {} -#endif - - -#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) -static struct w1_gpio_platform_data w1_gpio_pdata = { - /* If you choose to use a pin other than PB16 it needs to be 3.3V */ - .pin = AT91_PIN_PB16, - .is_open_drain = 1, - .ext_pullup_enable_pin = -EINVAL, -}; - -static struct platform_device w1_device = { - .name = "w1-gpio", - .id = -1, - .dev.platform_data = &w1_gpio_pdata, -}; - -static void __init at91_add_device_w1(void) -{ - at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); - at91_set_multi_drive(w1_gpio_pdata.pin, 1); - platform_device_register(&w1_device); -} - -#endif - - -static struct i2c_board_info __initdata foxg20_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50), - }, -}; - - -static void __init foxg20_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS - | ATMEL_UART_RTS - | ATMEL_UART_DTR - | ATMEL_UART_DSR - | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx & Tx only) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, 0); - - /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US3, 4, - ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART4 on ttyS5. (Rx & Tx only) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx & Tx only) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - - /* Set the internal pull-up resistor on DRXD */ - at91_set_A_periph(AT91_PIN_PB14, 1); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&foxg20_usbh_data); - /* USB Device */ - at91_add_device_udc(&foxg20_udc_data); - /* SPI */ - at91_add_device_spi(foxg20_spi_devices, ARRAY_SIZE(foxg20_spi_devices)); - /* Ethernet */ - at91_add_device_eth(&foxg20_macb_data); - /* MMC */ - at91_add_device_mci(0, &foxg20_mci0_data); - /* I2C */ - at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices)); - /* LEDs */ - at91_gpio_leds(foxg20_leds, ARRAY_SIZE(foxg20_leds)); - /* Push Buttons */ - foxg20_add_device_buttons(); -#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) - at91_add_device_w1(); -#endif -} - -MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") - /* Maintainer: Sergio Tanzilli */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = foxg20_init_early, - .init_irq = at91_init_irq_default, - .init_machine = foxg20_board_init, -MACHINE_END
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index b729dd1..bf5cc55 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -576,7 +576,7 @@ } MACHINE_START(GSIA18S, "GS_IA18_S") - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = gsia18s_init_early,
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index b48d95e..9c26b94 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -219,7 +219,7 @@ MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = pcontrol_g20_init_early,
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c deleted file mode 100644 index f28e8b7..0000000 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ /dev/null
@@ -1,232 +0,0 @@ -/* - * board-rsi-ews.c - * - * Copyright (C) - * 2005 SAN People, - * 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG - * - * Licensed under GPLv2 or later. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/mtd/physmap.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> - -#include <linux/gpio.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - -static void __init rsi_ews_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * Ethernet - */ -static struct macb_platform_data rsi_ews_eth_data __initdata = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -/* - * USB Host - */ -static struct at91_usbh_data rsi_ews_usbh_data __initdata = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * SD/MC - */ -static struct mci_platform_data __initdata rsi_ews_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PB27, - .wp_pin = AT91_PIN_PB29, - }, -}; - -/* - * I2C - */ -static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = { - { - I2C_BOARD_INFO("ds1337", 0x68), - }, - { - I2C_BOARD_INFO("24c01", 0x50), - } -}; - -/* - * LEDs - */ -static struct gpio_led rsi_ews_leds[] = { - { - .name = "led0", - .gpio = AT91_PIN_PB6, - .active_low = 0, - }, - { - .name = "led1", - .gpio = AT91_PIN_PB7, - .active_low = 0, - }, - { - .name = "led2", - .gpio = AT91_PIN_PB8, - .active_low = 0, - }, - { - .name = "led3", - .gpio = AT91_PIN_PB9, - .active_low = 0, - }, -}; - -/* - * DataFlash - */ -static struct spi_board_info rsi_ews_spi_devices[] = { - { /* DataFlash chip 1*/ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 5 * 1000 * 1000, - }, - { /* DataFlash chip 2*/ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 5 * 1000 * 1000, - }, -}; - -/* - * NOR flash - */ -static struct mtd_partition rsiews_nor_partitions[] = { - { - .name = "boot", - .offset = 0, - .size = 3 * SZ_128K, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_2M - (3 * SZ_128K) - }, - { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_8M - }, - { - .name = "kernelupd", - .offset = MTDPART_OFS_NXTBLK, - .size = 3 * SZ_512K, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "rootupd", - .offset = MTDPART_OFS_NXTBLK, - .size = 9 * SZ_512K, - .mask_flags = MTD_WRITEABLE - }, -}; - -static struct physmap_flash_data rsiews_nor_data = { - .width = 2, - .parts = rsiews_nor_partitions, - .nr_parts = ARRAY_SIZE(rsiews_nor_partitions), -}; - -#define NOR_BASE AT91_CHIPSELECT_0 -#define NOR_SIZE SZ_16M - -static struct resource nor_flash_resources[] = { - { - .start = NOR_BASE, - .end = NOR_BASE + NOR_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device rsiews_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &rsiews_nor_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -/* - * Init Func - */ -static void __init rsi_ews_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - /* This one is for debugging */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - /* Dialin/-out modem interface */ - at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART3 on ttyS4. (Rx, Tx, RTS) */ - /* RS485 communication */ - at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS); - at91_add_device_serial(); - at91_set_gpio_output(AT91_PIN_PA21, 0); - /* Ethernet */ - at91_add_device_eth(&rsi_ews_eth_data); - /* USB Host */ - at91_add_device_usbh(&rsi_ews_usbh_data); - /* I2C */ - at91_add_device_i2c(rsi_ews_i2c_devices, - ARRAY_SIZE(rsi_ews_i2c_devices)); - /* SPI */ - at91_add_device_spi(rsi_ews_spi_devices, - ARRAY_SIZE(rsi_ews_spi_devices)); - /* MMC */ - at91_add_device_mci(0, &rsi_ews_mci0_data); - /* NOR Flash */ - platform_device_register(&rsiews_nor_flash); - /* LEDs */ - at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds)); -} - -MACHINE_START(RSI_EWS, "RSI EWS") - /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = rsi_ews_init_early, - .init_irq = at91_init_irq_default, - .init_machine = rsi_ews_board_init, -MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index d24dda6..c2166e3 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -187,6 +187,8 @@ static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -219,7 +221,7 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 65dea12..bf8a946 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -45,7 +45,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -307,6 +306,8 @@ static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -344,7 +345,7 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 4637432..e85ada8 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -49,7 +49,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -561,6 +560,8 @@ static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -603,7 +604,7 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, @@ -613,7 +614,7 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index fc44609..d76680f 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -50,7 +50,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -439,6 +438,8 @@ static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -483,7 +484,7 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index e1be6e2..49f0752 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -410,7 +410,7 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, @@ -420,7 +420,7 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index b227732..a517c7f 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -48,7 +48,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -471,6 +470,8 @@ static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -517,7 +518,7 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index b64648b..8bca329 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -35,7 +35,6 @@ #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -292,6 +291,8 @@ static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -323,7 +324,7 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early,
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 1b870e6..b4aff84 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -154,6 +154,8 @@ static void __init snapper9260_board_init(void) { + at91_register_devices(); + at91_add_device_i2c(snapper9260_i2c_devices, ARRAY_SIZE(snapper9260_i2c_devices)); @@ -178,7 +180,7 @@ } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = snapper9260_init_early,
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 3b57503..e825641 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -275,7 +275,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, @@ -285,7 +285,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early,
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 034529d..d66f102 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c
@@ -962,6 +962,7 @@ } at91_pmc_write(AT91_PMC_SCDR, scdr); + at91_pmc_write(AT91_PMC_PCDR, pcdr); if (cpu_is_sama5d3()) at91_pmc_write(AT91_PMC_PCDR1, pcdr1);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 631fa3b..81959cf 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h
@@ -8,12 +8,16 @@ * published by the Free Software Foundation. */ +#ifndef _AT91_GENERIC_H +#define _AT91_GENERIC_H + #include <linux/clkdev.h> #include <linux/of.h> #include <linux/reboot.h> /* Map io */ extern void __init at91_map_io(void); +extern void __init at91_alt_map_io(void); extern void __init at91_init_sram(int bank, unsigned long base, unsigned int length); @@ -37,12 +41,15 @@ extern void __init at91_sysirq_mask_rtc(u32 rtc_base); extern void __init at91_sysirq_mask_rtt(u32 rtt_base); + /* Devices */ +extern void __init at91_register_devices(void); /* Timer */ +extern void __init at91_init_time(void); extern void at91rm9200_ioremap_st(u32 addr); extern void at91rm9200_timer_init(void); extern void at91sam926x_ioremap_pit(u32 addr); -extern void at91sam926x_pit_init(void); +extern void at91sam926x_pit_init(int irq); extern void at91x40_timer_init(void); /* Clocks */ @@ -62,14 +69,6 @@ /* idle */ extern void at91sam9_idle(void); -/* reset */ -extern void at91_ioremap_rstc(u32 base_addr); -extern void at91sam9_alt_restart(enum reboot_mode, const char *); -extern void at91sam9g45_restart(enum reboot_mode, const char *); - -/* shutdown */ -extern void at91_ioremap_shdwc(u32 base_addr); - /* Matrix */ extern void at91_ioremap_matrix(u32 base_addr); @@ -90,3 +89,5 @@ struct device_node *parent); extern u32 at91_get_extern_irq(void); + +#endif /* _AT91_GENERIC_H */
diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h index 732b11c..7b73662 100644 --- a/arch/arm/mach-at91/include/mach/at91_pio.h +++ b/arch/arm/mach-at91/include/mach/at91_pio.h
@@ -71,4 +71,10 @@ #define ABCDSR_PERIPH_C 0x2 #define ABCDSR_PERIPH_D 0x3 +#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/ +#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/ + +#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/ +#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/ + #endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 86c71de..b27e9ca 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -36,7 +36,7 @@ #define ARCH_ID_AT91M40807 0x14080745 #define ARCH_ID_AT91R40008 0x44000840 -#define ARCH_ID_SAMA5D3 0x8A5C07C0 +#define ARCH_ID_SAMA5 0x8A5C07C0 #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 @@ -49,12 +49,19 @@ #define ARCH_EXID_AT91SAM9G25 0x00000003 #define ARCH_EXID_AT91SAM9X25 0x00000004 +#define ARCH_EXID_SAMA5D3 0x00004300 #define ARCH_EXID_SAMA5D31 0x00444300 #define ARCH_EXID_SAMA5D33 0x00414300 #define ARCH_EXID_SAMA5D34 0x00414301 #define ARCH_EXID_SAMA5D35 0x00584300 #define ARCH_EXID_SAMA5D36 0x00004301 +#define ARCH_EXID_SAMA5D4 0x00000007 +#define ARCH_EXID_SAMA5D41 0x00000001 +#define ARCH_EXID_SAMA5D42 0x00000002 +#define ARCH_EXID_SAMA5D43 0x00000003 +#define ARCH_EXID_SAMA5D44 0x00000004 + #define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 @@ -86,6 +93,9 @@ /* SAMA5D3 */ AT91_SOC_SAMA5D3, + /* SAMA5D4 */ + AT91_SOC_SAMA5D4, + /* Unknown type */ AT91_SOC_UNKNOWN, }; @@ -108,6 +118,10 @@ AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34, AT91_SOC_SAMA5D35, AT91_SOC_SAMA5D36, + /* SAMA5D4 */ + AT91_SOC_SAMA5D41, AT91_SOC_SAMA5D42, AT91_SOC_SAMA5D43, + AT91_SOC_SAMA5D44, + /* No subtype for this SoC */ AT91_SOC_SUBTYPE_NONE, @@ -211,6 +225,12 @@ #define cpu_is_sama5d3() (0) #endif +#ifdef CONFIG_SOC_SAMA5D4 +#define cpu_is_sama5d4() (at91_soc_initdata.type == AT91_SOC_SAMA5D4) +#else +#define cpu_is_sama5d4() (0) +#endif + /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index c6bb9e2..2103a90 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -16,8 +16,11 @@ #if defined(CONFIG_AT91_DEBUG_LL_DBGU0) #define AT91_DBGU AT91_BASE_DBGU0 -#else +#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1) #define AT91_DBGU AT91_BASE_DBGU1 +#else +/* On sama5d4, use USART3 as low level serial console */ +#define AT91_DBGU SAMA5D4_BASE_USART3 #endif .macro addruart, rp, rv, tmp
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 5633824..c137973 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -19,8 +19,10 @@ /* DBGU base */ /* rm9200, 9260/9g20, 9261/9g10, 9rl */ #define AT91_BASE_DBGU0 0xfffff200 -/* 9263, 9g45 */ +/* 9263, 9g45, sama5d3 */ #define AT91_BASE_DBGU1 0xffffee00 +/* sama5d4 */ +#define AT91_BASE_DBGU2 0xfc069000 #if defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> @@ -34,6 +36,7 @@ #include <mach/at91sam9x5.h> #include <mach/at91sam9n12.h> #include <mach/sama5d3.h> +#include <mach/sama5d4.h> /* * On all at91 except rm9200 and x40 have the System Controller starts @@ -47,9 +50,15 @@ * and map the same memory space */ #define AT91_BASE_SYS 0xffffc000 + #endif /* + * On sama5d4 there is no system controller, we map some needed peripherals + */ +#define AT91_ALT_BASE_SYS 0xfc069000 + +/* * On all at91 have the Advanced Interrupt Controller starts at address * 0xfffff000 and the Power Management Controller starts at 0xfffffc00 */ @@ -69,23 +78,35 @@ */ #define AT91_IO_PHYS_BASE 0xFFF78000 #define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE) + +/* + * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000 + * to 0xFB069000 .. 0xFB06F000. (24Kb) + */ +#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS +#define AT91_ALT_IO_VIRT_BASE IOMEM(0xFB069000) #else /* * Identity mapping for the non MMU case. */ #define AT91_IO_PHYS_BASE AT91_BASE_SYS #define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE) + +#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS +#define AT91_ALT_IO_VIRT_BASE IOMEM(AT91_ALT_BASE_SYS) #endif #define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) /* Convert a physical IO address to virtual IO address */ #define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) +#define AT91_ALT_IO_P2V(x) ((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE) /* * Virtual to Physical Address mapping for IO devices. */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) +#define AT91_ALT_VA_BASE_SYS AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS) /* Internal SRAM is mapped below the IO devices */ #define AT91_SRAM_MAX SZ_1M
diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h new file mode 100644 index 0000000..f256a45 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/sama5d4.h
@@ -0,0 +1,33 @@ +/* + * Chip-specific header file for the SAMA5D4 family + * + * Copyright (C) 2013 Atmel Corporation, + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Common definitions. + * Based on SAMA5D4 datasheet. + * + * Licensed under GPLv2 or later. + */ + +#ifndef SAMA5D4_H +#define SAMA5D4_H + +/* + * User Peripheral physical base addresses. + */ +#define SAMA5D4_BASE_USART3 0xfc00c000 /* (USART3 non-secure) Base Address */ +#define SAMA5D4_BASE_PMC 0xf0018000 /* (PMC) Base Address */ +#define SAMA5D4_BASE_MPDDRC 0xf0010000 /* (MPDDRC) Base Address */ +#define SAMA5D4_BASE_PIOD 0xfc068000 /* (PIOD) Base Address */ + +/* Some other peripherals */ +#define SAMA5D4_BASE_SYS2 SAMA5D4_BASE_PIOD + +/* + * Internal Memory. + */ +#define SAMA5D4_NS_SRAM_BASE 0x00210000 /* Internal SRAM base address Non-Secure */ +#define SAMA5D4_NS_SRAM_SIZE (64 * SZ_1K) /* Internal SRAM size Non-Secure part (64Kb) */ + +#endif
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index 4bb644f..acb2d890 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -94,7 +94,7 @@ 0, }; -static const u32 uarts_sama5[] = { +static const u32 uarts_sama5d3[] = { AT91_BASE_DBGU1, SAMA5D3_BASE_USART0, SAMA5D3_BASE_USART1, @@ -103,6 +103,12 @@ 0, }; +static const u32 uarts_sama5d4[] = { + AT91_BASE_DBGU2, + SAMA5D4_BASE_USART3, + 0, +}; + static inline const u32* decomp_soc_detect(void __iomem *dbgu_base) { u32 cidr, socid; @@ -134,8 +140,14 @@ case ARCH_ID_AT91SAM9X5: return uarts_sam9x5; - case ARCH_ID_SAMA5D3: - return uarts_sama5; + case ARCH_ID_SAMA5: + cidr = __raw_readl(dbgu_base + AT91_DBGU_EXID); + if (cidr & ARCH_EXID_SAMA5D3) + return uarts_sama5d3; + else if (cidr & ARCH_EXID_SAMA5D4) + return uarts_sama5d4; + + break; } /* at91sam9g10 */ @@ -156,9 +168,10 @@ const u32* usarts; usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0); - if (!usarts) usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1); + if (!usarts) + usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU2); if (!usarts) { at91_uart = NULL; return;
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 3d192c5..cdb3ec9 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c
@@ -48,11 +48,6 @@ static struct irq_domain *at91_aic_domain; static struct device_node *at91_aic_np; static unsigned int n_irqs = NR_AIC_IRQS; -static unsigned long at91_aic_caps = 0; - -/* AIC5 introduces a Source Select Register */ -#define AT91_AIC_CAP_AIC5 (1 << 0) -#define has_aic5() (at91_aic_caps & AT91_AIC_CAP_AIC5) #ifdef CONFIG_PM @@ -92,50 +87,14 @@ void at91_irq_suspend(void) { - int bit = -1; - - if (has_aic5()) { - /* disable enabled irqs */ - while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - } - /* enable wakeup irqs */ - bit = -1; - while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IECR, 1); - } - } else { - at91_aic_write(AT91_AIC_IDCR, *backups); - at91_aic_write(AT91_AIC_IECR, *wakeups); - } + at91_aic_write(AT91_AIC_IDCR, *backups); + at91_aic_write(AT91_AIC_IECR, *wakeups); } void at91_irq_resume(void) { - int bit = -1; - - if (has_aic5()) { - /* disable wakeup irqs */ - while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - } - /* enable irqs disabled for suspend */ - bit = -1; - while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IECR, 1); - } - } else { - at91_aic_write(AT91_AIC_IDCR, *wakeups); - at91_aic_write(AT91_AIC_IECR, *backups); - } + at91_aic_write(AT91_AIC_IDCR, *wakeups); + at91_aic_write(AT91_AIC_IECR, *backups); } #else @@ -169,21 +128,6 @@ handle_IRQ(irqnr, regs); } -asmlinkage void __exception_irq_entry -at91_aic5_handle_irq(struct pt_regs *regs) -{ - u32 irqnr; - u32 irqstat; - - irqnr = at91_aic_read(AT91_AIC5_IVR); - irqstat = at91_aic_read(AT91_AIC5_ISR); - - if (!irqstat) - at91_aic_write(AT91_AIC5_EOICR, 0); - else - handle_IRQ(irqnr, regs); -} - static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ @@ -192,15 +136,6 @@ clear_backup(d->hwirq); } -static void __maybe_unused at91_aic5_mask_irq(struct irq_data *d) -{ - /* Disable interrupt on AIC5 */ - at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - /* Update ISR cache */ - clear_backup(d->hwirq); -} - static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ @@ -209,15 +144,6 @@ set_backup(d->hwirq); } -static void __maybe_unused at91_aic5_unmask_irq(struct irq_data *d) -{ - /* Enable interrupt on AIC5 */ - at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IECR, 1); - /* Update ISR cache */ - set_backup(d->hwirq); -} - static void at91_aic_eoi(struct irq_data *d) { /* @@ -227,11 +153,6 @@ at91_aic_write(AT91_AIC_EOICR, 0); } -static void __maybe_unused at91_aic5_eoi(struct irq_data *d) -{ - at91_aic_write(AT91_AIC5_EOICR, 0); -} - static unsigned long *at91_extern_irq; u32 at91_get_extern_irq(void) @@ -282,16 +203,8 @@ if (srctype < 0) return srctype; - if (has_aic5()) { - at91_aic_write(AT91_AIC5_SSR, - d->hwirq & AT91_AIC5_INTSEL_MSK); - smr = at91_aic_read(AT91_AIC5_SMR) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC5_SMR, smr | srctype); - } else { - smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) - & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); - } + smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); return 0; } @@ -331,177 +244,6 @@ at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); } -static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) -{ - int i; - - /* - * Perform 8 End Of Interrupt Command to make sure AIC - * will not Lock out nIRQ - */ - for (i = 0; i < 8; i++) - at91_aic_write(AT91_AIC5_EOICR, 0); - - /* - * Spurious Interrupt ID in Spurious Vector Register. - * When there is no current interrupt, the IRQ Vector Register - * reads the value stored in AIC_SPU - */ - at91_aic_write(AT91_AIC5_SPU, spu_vector); - - /* No debugging in AIC: Debug (Protect) Control Register */ - at91_aic_write(AT91_AIC5_DCR, 0); - - /* Disable and clear all interrupts initially */ - for (i = 0; i < n_irqs; i++) { - at91_aic_write(AT91_AIC5_SSR, i & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - at91_aic_write(AT91_AIC5_ICCR, 1); - } -} - -#if defined(CONFIG_OF) -static unsigned int *at91_aic_irq_priorities; - -static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - /* Put virq number in Source Vector Register */ - at91_aic_write(AT91_AIC_SVR(hw), virq); - - /* Active Low interrupt, with priority */ - at91_aic_write(AT91_AIC_SMR(hw), - AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static int at91_aic5_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - at91_aic_write(AT91_AIC5_SSR, hw & AT91_AIC5_INTSEL_MSK); - - /* Put virq number in Source Vector Register */ - at91_aic_write(AT91_AIC5_SVR, virq); - - /* Active Low interrupt, with priority */ - at91_aic_write(AT91_AIC5_SMR, - AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr, - const u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, unsigned int *out_type) -{ - if (WARN_ON(intsize < 3)) - return -EINVAL; - if (WARN_ON(intspec[0] >= n_irqs)) - return -EINVAL; - if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY) - || (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY))) - return -EINVAL; - - *out_hwirq = intspec[0]; - *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; - at91_aic_irq_priorities[*out_hwirq] = intspec[2]; - - return 0; -} - -static struct irq_domain_ops at91_aic_irq_ops = { - .map = at91_aic_irq_map, - .xlate = at91_aic_irq_domain_xlate, -}; - -int __init at91_aic_of_common_init(struct device_node *node, - struct device_node *parent) -{ - struct property *prop; - const __be32 *p; - u32 val; - - at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) - * sizeof(*at91_extern_irq), GFP_KERNEL); - if (!at91_extern_irq) - return -ENOMEM; - - if (at91_aic_pm_init()) { - kfree(at91_extern_irq); - return -ENOMEM; - } - - at91_aic_irq_priorities = kzalloc(n_irqs - * sizeof(*at91_aic_irq_priorities), - GFP_KERNEL); - if (!at91_aic_irq_priorities) - return -ENOMEM; - - at91_aic_base = of_iomap(node, 0); - at91_aic_np = node; - - at91_aic_domain = irq_domain_add_linear(at91_aic_np, n_irqs, - &at91_aic_irq_ops, NULL); - if (!at91_aic_domain) - panic("Unable to add AIC irq domain (DT)\n"); - - of_property_for_each_u32(node, "atmel,external-irqs", prop, p, val) { - if (val >= n_irqs) - pr_warn("AIC: external irq %d >= %d skip it\n", - val, n_irqs); - else - set_bit(val, at91_extern_irq); - } - - irq_set_default_host(at91_aic_domain); - - return 0; -} - -int __init at91_aic_of_init(struct device_node *node, - struct device_node *parent) -{ - int err; - - err = at91_aic_of_common_init(node, parent); - if (err) - return err; - - at91_aic_hw_init(n_irqs); - - return 0; -} - -int __init at91_aic5_of_init(struct device_node *node, - struct device_node *parent) -{ - int err; - - at91_aic_caps |= AT91_AIC_CAP_AIC5; - n_irqs = NR_AIC5_IRQS; - at91_aic_chip.irq_ack = at91_aic5_mask_irq; - at91_aic_chip.irq_mask = at91_aic5_mask_irq; - at91_aic_chip.irq_unmask = at91_aic5_unmask_irq; - at91_aic_chip.irq_eoi = at91_aic5_eoi; - at91_aic_irq_ops.map = at91_aic5_irq_map; - - err = at91_aic_of_common_init(node, parent); - if (err) - return err; - - at91_aic5_hw_init(n_irqs); - - return 0; -} -#endif - /* * Initialize the AIC interrupt controller. */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index e955545..4073ab7 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c
@@ -34,79 +34,8 @@ #include "pm.h" #include "gpio.h" -/* - * Show the reason for the previous system reset. - */ - -#include "at91_rstc.h" -#include "at91_shdwc.h" - static void (*at91_pm_standby)(void); -static void __init show_reset_status(void) -{ - static char reset[] __initdata = "reset"; - - static char general[] __initdata = "general"; - static char wakeup[] __initdata = "wakeup"; - static char watchdog[] __initdata = "watchdog"; - static char software[] __initdata = "software"; - static char user[] __initdata = "user"; - static char unknown[] __initdata = "unknown"; - - static char signal[] __initdata = "signal"; - static char rtc[] __initdata = "rtc"; - static char rtt[] __initdata = "rtt"; - static char restore[] __initdata = "power-restored"; - - char *reason, *r2 = reset; - u32 reset_type, wake_type; - - if (!at91_shdwc_base || !at91_rstc_base) - return; - - reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; - wake_type = at91_shdwc_read(AT91_SHDW_SR); - - switch (reset_type) { - case AT91_RSTC_RSTTYP_GENERAL: - reason = general; - break; - case AT91_RSTC_RSTTYP_WAKEUP: - /* board-specific code enabled the wakeup sources */ - reason = wakeup; - - /* "wakeup signal" */ - if (wake_type & AT91_SHDW_WAKEUP0) - r2 = signal; - else { - r2 = reason; - if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */ - reason = rtt; - else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */ - reason = rtc; - else if (wake_type == 0) /* power-restored wakeup */ - reason = restore; - else /* unknown wakeup */ - reason = unknown; - } - break; - case AT91_RSTC_RSTTYP_WATCHDOG: - reason = watchdog; - break; - case AT91_RSTC_RSTTYP_SOFTWARE: - reason = software; - break; - case AT91_RSTC_RSTTYP_USER: - reason = user; - break; - default: - reason = unknown; - break; - } - pr_info("AT91: Starting after %s %s\n", reason, r2); -} - static int at91_pm_valid_state(suspend_state_t state) { switch (state) { @@ -206,16 +135,19 @@ at91_pinctrl_gpio_suspend(); else at91_gpio_suspend(); - at91_irq_suspend(); - pr_debug("AT91: PM - wake mask %08x, pm state %d\n", - /* remember all the always-wake irqs */ - (at91_pmc_read(AT91_PMC_PCSR) - | (1 << AT91_ID_FIQ) - | (1 << AT91_ID_SYS) - | (at91_get_extern_irq())) - & at91_aic_read(AT91_AIC_IMR), - state); + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) { + at91_irq_suspend(); + + pr_debug("AT91: PM - wake mask %08x, pm state %d\n", + /* remember all the always-wake irqs */ + (at91_pmc_read(AT91_PMC_PCSR) + | (1 << AT91_ID_FIQ) + | (1 << AT91_ID_SYS) + | (at91_get_extern_irq())) + & at91_aic_read(AT91_AIC_IMR), + state); + } switch (state) { /* @@ -280,12 +212,17 @@ goto error; } - pr_debug("AT91: PM - wakeup %08x\n", - at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR)); + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) + pr_debug("AT91: PM - wakeup %08x\n", + at91_aic_read(AT91_AIC_IPR) & + at91_aic_read(AT91_AIC_IMR)); error: target_state = PM_SUSPEND_ON; - at91_irq_resume(); + + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) + at91_irq_resume(); + if (of_have_populated_dt()) at91_pinctrl_gpio_resume(); else @@ -338,7 +275,6 @@ suspend_set_ops(&at91_pm_ops); - show_reset_status(); return 0; } arch_initcall(at91_pm_init);
diff --git a/arch/arm/mach-at91/sama5d4.c b/arch/arm/mach-at91/sama5d4.c new file mode 100644 index 0000000..7638509 --- /dev/null +++ b/arch/arm/mach-at91/sama5d4.c
@@ -0,0 +1,64 @@ +/* + * Chip-specific setup code for the SAMA5D4 family + * + * Copyright (C) 2013 Atmel Corporation, + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/clk/at91_pmc.h> + +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/sama5d4.h> +#include <mach/cpu.h> +#include <mach/hardware.h> + +#include "soc.h" +#include "generic.h" +#include "sam9_smc.h" + +/* -------------------------------------------------------------------- + * Processor initialization + * -------------------------------------------------------------------- */ +static struct map_desc at91_io_desc[] __initdata = { + { + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC), + .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC), + .length = SZ_512, + .type = MT_DEVICE, + }, + { + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC), + .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC), + .length = SZ_512, + .type = MT_DEVICE, + }, + { /* On sama5d4, we use USART3 as serial console */ + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3), + .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3), + .length = SZ_256, + .type = MT_DEVICE, + }, + { /* A bunch of peripheral with fine grained IO space */ + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2), + .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2), + .length = SZ_2K, + .type = MT_DEVICE, + }, +}; + + +static void __init sama5d4_map_io(void) +{ + iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc)); + at91_init_sram(0, SAMA5D4_NS_SRAM_BASE, SAMA5D4_NS_SRAM_SIZE); +} + +AT91_SOC_START(sama5d4) + .map_io = sama5d4_map_io, +AT91_SOC_END
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index f7a07a5..9610792 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c
@@ -5,6 +5,8 @@ * Under GPLv2 */ +#define pr_fmt(fmt) "AT91: " fmt + #include <linux/module.h> #include <linux/io.h> #include <linux/mm.h> @@ -20,7 +22,6 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> -#include "at91_shdwc.h" #include "soc.h" #include "generic.h" #include "pm.h" @@ -37,7 +38,7 @@ else at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - pr_info("AT91: filled in soc subtype: %s\n", + pr_info("filled in soc subtype: %s\n", at91_get_soc_subtype(&at91_soc_initdata)); } @@ -49,7 +50,8 @@ void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority, at91_boot_soc.extern_irq); + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91)) + at91_aic_init(priority, at91_boot_soc.extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); @@ -66,7 +68,7 @@ } at91_ramc_base[id] = ioremap(addr, size); if (!at91_ramc_base[id]) - panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr); + panic(pr_fmt("Impossible to ioremap ramc.%d 0x%x\n"), id, addr); } static struct map_desc sram_desc[2] __initdata; @@ -83,7 +85,7 @@ desc->length = length; desc->type = MT_MEMORY_RWX_NONCACHED; - pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n", + pr_info("sram at 0x%lx of 0x%x mapped at 0x%lx\n", base, length, desc->virtual); iotable_init(desc, 1); @@ -96,6 +98,13 @@ .type = MT_DEVICE, }; +static struct map_desc at91_alt_io_desc __initdata __maybe_unused = { + .virtual = (unsigned long)AT91_ALT_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_ALT_BASE_SYS), + .length = 24 * SZ_1K, + .type = MT_DEVICE, +}; + static void __init soc_detect(u32 dbgu_base) { u32 cidr, socid; @@ -158,9 +167,12 @@ at91_boot_soc = at91sam9n12_soc; break; - case ARCH_ID_SAMA5D3: - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - at91_boot_soc = sama5d3_soc; + case ARCH_ID_SAMA5: + at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { + at91_soc_initdata.type = AT91_SOC_SAMA5D3; + at91_boot_soc = sama5d3_soc; + } break; } @@ -183,7 +195,8 @@ at91_soc_initdata.cidr = cidr; /* sub version of soc */ - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + if (!at91_soc_initdata.exid) + at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); if (at91_soc_initdata.type == AT91_SOC_SAM9G45) { switch (at91_soc_initdata.exid) { @@ -240,6 +253,54 @@ } } +static void __init alt_soc_detect(u32 dbgu_base) +{ + u32 cidr, socid; + + /* SoC ID */ + cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); + socid = cidr & ~AT91_CIDR_VERSION; + + switch (socid) { + case ARCH_ID_SAMA5: + at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { + at91_soc_initdata.type = AT91_SOC_SAMA5D3; + at91_boot_soc = sama5d3_soc; + } else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) { + at91_soc_initdata.type = AT91_SOC_SAMA5D4; + at91_boot_soc = sama5d4_soc; + } + break; + } + + if (!at91_soc_is_detected()) + return; + + at91_soc_initdata.cidr = cidr; + + /* sub version of soc */ + if (!at91_soc_initdata.exid) + at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + + if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_SAMA5D41: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D41; + break; + case ARCH_EXID_SAMA5D42: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D42; + break; + case ARCH_EXID_SAMA5D43: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D43; + break; + case ARCH_EXID_SAMA5D44: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D44; + break; + } + } +} + static const char *soc_name[] = { [AT91_SOC_RM9200] = "at91rm9200", [AT91_SOC_SAM9260] = "at91sam9260", @@ -252,6 +313,7 @@ [AT91_SOC_SAM9X5] = "at91sam9x5", [AT91_SOC_SAM9N12] = "at91sam9n12", [AT91_SOC_SAMA5D3] = "sama5d3", + [AT91_SOC_SAMA5D4] = "sama5d4", [AT91_SOC_UNKNOWN] = "Unknown", }; @@ -279,6 +341,10 @@ [AT91_SOC_SAMA5D34] = "sama5d34", [AT91_SOC_SAMA5D35] = "sama5d35", [AT91_SOC_SAMA5D36] = "sama5d36", + [AT91_SOC_SAMA5D41] = "sama5d41", + [AT91_SOC_SAMA5D42] = "sama5d42", + [AT91_SOC_SAMA5D43] = "sama5d43", + [AT91_SOC_SAMA5D44] = "sama5d44", [AT91_SOC_SUBTYPE_NONE] = "None", [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", }; @@ -302,6 +368,31 @@ soc_detect(AT91_BASE_DBGU1); if (!at91_soc_is_detected()) + panic(pr_fmt("Impossible to detect the SOC type")); + + pr_info("Detected soc type: %s\n", + at91_get_soc_type(&at91_soc_initdata)); + if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) + pr_info("Detected soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); + + if (!at91_soc_is_enabled()) + panic(pr_fmt("Soc not enabled")); + + if (at91_boot_soc.map_io) + at91_boot_soc.map_io(); +} + +void __init at91_alt_map_io(void) +{ + /* Map peripherals */ + iotable_init(&at91_alt_io_desc, 1); + + at91_soc_initdata.type = AT91_SOC_UNKNOWN; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; + + alt_soc_detect(AT91_BASE_DBGU2); + if (!at91_soc_is_detected()) panic("AT91: Impossible to detect the SOC type"); pr_info("AT91: Detected soc type: %s\n", @@ -317,30 +408,6 @@ at91_boot_soc.map_io(); } -void __iomem *at91_shdwc_base = NULL; - -static void at91sam9_poweroff(void) -{ - at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -} - -void __init at91_ioremap_shdwc(u32 base_addr) -{ - at91_shdwc_base = ioremap(base_addr, 16); - if (!at91_shdwc_base) - panic("Impossible to ioremap at91_shdwc_base\n"); - pm_power_off = at91sam9_poweroff; -} - -void __iomem *at91_rstc_base; - -void __init at91_ioremap_rstc(u32 base_addr) -{ - at91_rstc_base = ioremap(base_addr, 16); - if (!at91_rstc_base) - panic("Impossible to ioremap at91_rstc_base\n"); -} - void __iomem *at91_matrix_base; EXPORT_SYMBOL_GPL(at91_matrix_base); @@ -348,42 +415,15 @@ { at91_matrix_base = ioremap(base_addr, 512); if (!at91_matrix_base) - panic("Impossible to ioremap at91_matrix_base\n"); + panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); } #if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40) -static struct of_device_id rstc_ids[] = { - { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart }, - { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, - { /*sentinel*/ } -}; - -static void at91_dt_rstc(void) -{ - struct device_node *np; - const struct of_device_id *of_id; - - np = of_find_matching_node(NULL, rstc_ids); - if (!np) - panic("unable to find compatible rstc node in dtb\n"); - - at91_rstc_base = of_iomap(np, 0); - if (!at91_rstc_base) - panic("unable to map rstc cpu registers\n"); - - of_id = of_match_node(rstc_ids, np); - if (!of_id) - panic("AT91: rtsc no restart function available\n"); - - arm_pm_restart = of_id->data; - - of_node_put(np); -} - static struct of_device_id ramc_ids[] = { { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby }, + { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby }, { /*sentinel*/ } }; @@ -391,100 +431,29 @@ { struct device_node *np; const struct of_device_id *of_id; + int idx = 0; + const void *standby = NULL; - np = of_find_matching_node(NULL, ramc_ids); - if (!np) - panic("unable to find compatible ram controller node in dtb\n"); + for_each_matching_node_and_match(np, ramc_ids, &of_id) { + at91_ramc_base[idx] = of_iomap(np, 0); + if (!at91_ramc_base[idx]) + panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx); - at91_ramc_base[0] = of_iomap(np, 0); - if (!at91_ramc_base[0]) - panic("unable to map ramc[0] cpu registers\n"); - /* the controller may have 2 banks */ - at91_ramc_base[1] = of_iomap(np, 1); + if (!standby) + standby = of_id->data; - of_id = of_match_node(ramc_ids, np); - if (!of_id) - pr_warn("AT91: ramc no standby function available\n"); - else - at91_pm_set_standby(of_id->data); + idx++; + } - of_node_put(np); -} + if (!idx) + panic(pr_fmt("unable to find compatible ram controller node in dtb\n")); -static struct of_device_id shdwc_ids[] = { - { .compatible = "atmel,at91sam9260-shdwc", }, - { .compatible = "atmel,at91sam9rl-shdwc", }, - { .compatible = "atmel,at91sam9x5-shdwc", }, - { /*sentinel*/ } -}; - -static const char *shdwc_wakeup_modes[] = { - [AT91_SHDW_WKMODE0_NONE] = "none", - [AT91_SHDW_WKMODE0_HIGH] = "high", - [AT91_SHDW_WKMODE0_LOW] = "low", - [AT91_SHDW_WKMODE0_ANYLEVEL] = "any", -}; - -const int at91_dtget_shdwc_wakeup_mode(struct device_node *np) -{ - const char *pm; - int err, i; - - err = of_property_read_string(np, "atmel,wakeup-mode", &pm); - if (err < 0) - return AT91_SHDW_WKMODE0_ANYLEVEL; - - for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++) - if (!strcasecmp(pm, shdwc_wakeup_modes[i])) - return i; - - return -ENODEV; -} - -static void at91_dt_shdwc(void) -{ - struct device_node *np; - int wakeup_mode; - u32 reg; - u32 mode = 0; - - np = of_find_matching_node(NULL, shdwc_ids); - if (!np) { - pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n"); + if (!standby) { + pr_warn("ramc no standby function available\n"); return; } - at91_shdwc_base = of_iomap(np, 0); - if (!at91_shdwc_base) - panic("AT91: unable to map shdwc cpu registers\n"); - - wakeup_mode = at91_dtget_shdwc_wakeup_mode(np); - if (wakeup_mode < 0) { - pr_warn("AT91: shdwc unknown wakeup mode\n"); - goto end; - } - - if (!of_property_read_u32(np, "atmel,wakeup-counter", ®)) { - if (reg > AT91_SHDW_CPTWK0_MAX) { - pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n", - reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX); - reg = AT91_SHDW_CPTWK0_MAX; - } - mode |= AT91_SHDW_CPTWK0_(reg); - } - - if (of_property_read_bool(np, "atmel,wakeup-rtc-timer")) - mode |= AT91_SHDW_RTCWKEN; - - if (of_property_read_bool(np, "atmel,wakeup-rtt-timer")) - mode |= AT91_SHDW_RTTWKEN; - - at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode); - -end: - pm_power_off = at91sam9_poweroff; - - of_node_put(np); + at91_pm_set_standby(standby); } void __init at91rm9200_dt_initialize(void) @@ -503,9 +472,7 @@ void __init at91_dt_initialize(void) { - at91_dt_rstc(); at91_dt_ramc(); - at91_dt_shdwc(); /* Init clock subsystem */ at91_dt_clock_init(); @@ -533,3 +500,13 @@ pinctrl_provide_dummies(); } + +void __init at91_register_devices(void) +{ + at91_boot_soc.register_devices(); +} + +void __init at91_init_time(void) +{ + at91_boot_soc.init_time(); +}
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index a1e1482..9a8fd97 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h
@@ -11,7 +11,9 @@ void (*map_io)(void); void (*ioremap_registers)(void); void (*register_clocks)(void); + void (*register_devices)(void); void (*init)(void); + void (*init_time)(void); }; extern struct at91_init_soc at91_boot_soc; @@ -24,6 +26,7 @@ extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9n12_soc; extern struct at91_init_soc sama5d3_soc; +extern struct at91_init_soc sama5d4_soc; #define AT91_SOC_START(_name) \ struct at91_init_soc __initdata _name##_soc \ @@ -74,3 +77,7 @@ #if !defined(CONFIG_SOC_SAMA5D3) #define sama5d3_soc at91_boot_soc #endif + +#if !defined(CONFIG_SOC_SAMA5D4) +#define sama5d4_soc at91_boot_soc +#endif
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index fc93800..2abad74 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig
@@ -99,6 +99,23 @@ different SoC or with the older BCM47XX and BCM53XX based network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx +config ARCH_BCM_63XX + bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7 + depends on MMU + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_GIC + select ARM_GLOBAL_TIMER + select CACHE_L2X0 + select HAVE_ARM_ARCH_TIMER + select HAVE_ARM_TWD if SMP + select HAVE_ARM_SCU if SMP + select HAVE_SMP + help + This enables support for systems based on Broadcom DSL SoCs. + It currently supports the 'BCM63XX' ARM-based family, which includes + the BCM63138 variant. + config ARCH_BRCMSTB bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7 depends on MMU
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index b19a396..300ae4b 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile
@@ -34,6 +34,9 @@ # BCM5301X obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o +# BCM63XXx +obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o + ifeq ($(CONFIG_ARCH_BRCMSTB),y) obj-y += brcmstb.o endif
diff --git a/arch/arm/mach-bcm/bcm63xx.c b/arch/arm/mach-bcm/bcm63xx.c new file mode 100644 index 0000000..c4c66ae --- /dev/null +++ b/arch/arm/mach-bcm/bcm63xx.c
@@ -0,0 +1,27 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> + +static const char * const bcm63xx_dt_compat[] = { + "brcm,bcm63138", + NULL +}; + +DT_MACHINE_START(BCM63XXX_DT, "BCM63xx DSL SoC") + .dt_compat = bcm63xx_dt_compat, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, +MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c index fdf54d4..f339797 100644 --- a/arch/arm/mach-clps711x/board-edb7211.c +++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -14,8 +14,9 @@ #include <linux/types.h> #include <linux/i2c-gpio.h> #include <linux/interrupt.h> -#include <linux/backlight.h> #include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/pwm_backlight.h> #include <linux/memblock.h> #include <linux/mtd/physmap.h> @@ -108,23 +109,23 @@ .set_power = edb7211_lcd_power_set, }; -static void edb7211_lcd_backlight_set_intensity(int intensity) -{ - gpio_set_value(EDB7211_LCDBL, !!intensity); - clps_writel((clps_readl(PMPCON) & 0xf0ff) | (intensity << 8), PMPCON); -} - -static struct generic_bl_info edb7211_lcd_backlight_pdata = { - .name = "lcd-backlight.0", - .default_intensity = 0x01, - .max_intensity = 0x0f, - .set_bl_intensity = edb7211_lcd_backlight_set_intensity, +static struct pwm_lookup edb7211_pwm_lookup[] = { + PWM_LOOKUP("clps711x-pwm", 0, "pwm-backlight.0", NULL, + 0, PWM_POLARITY_NORMAL), }; +static struct platform_pwm_backlight_data pwm_bl_pdata = { + .dft_brightness = 0x01, + .max_brightness = 0x0f, + .enable_gpio = EDB7211_LCDBL, +}; + +static struct resource clps711x_pwm_res = + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + PMPCON, SZ_4); + static struct gpio edb7211_gpios[] __initconst = { { EDB7211_LCD_DC_DC_EN, GPIOF_OUT_INIT_LOW, "LCD DC-DC" }, { EDB7211_LCDEN, GPIOF_OUT_INIT_LOW, "LCD POWER" }, - { EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" }, }; /* Reserve screen memory region at the start of main system memory. */ @@ -153,12 +154,18 @@ gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios)); platform_device_register(&edb7211_flash_pdev); + platform_device_register_data(NULL, "platform-lcd", 0, &edb7211_lcd_power_pdata, sizeof(edb7211_lcd_power_pdata)); - platform_device_register_data(NULL, "generic-bl", 0, - &edb7211_lcd_backlight_pdata, - sizeof(edb7211_lcd_backlight_pdata)); + + platform_device_register_simple("clps711x-pwm", PLATFORM_DEVID_NONE, + &clps711x_pwm_res, 1); + pwm_add_table(edb7211_pwm_lookup, ARRAY_SIZE(edb7211_pwm_lookup)); + + platform_device_register_data(&platform_bus, "pwm-backlight", 0, + &pwm_bl_pdata, sizeof(pwm_bl_pdata)); + platform_device_register_simple("video-clps711x", 0, NULL, 0); platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, ARRAY_SIZE(edb7211_cs8900_resource));
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 2a6323b..671acc5a 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c
@@ -19,29 +19,17 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/io.h> + #include <linux/init.h> #include <linux/sizes.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/clockchips.h> -#include <linux/clocksource.h> -#include <linux/clk-provider.h> -#include <linux/sched_clock.h> #include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/system_misc.h> #include <mach/hardware.h> #include "common.h" -static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, - *clk_tint, *clk_spi; - /* * This maps the generic CLPS711x registers */ @@ -64,129 +52,11 @@ clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K); } -static u64 notrace clps711x_sched_clock_read(void) -{ - return ~readw_relaxed(CLPS711X_VIRT_BASE + TC1D); -} - -static void clps711x_clockevent_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - disable_irq(IRQ_TC2OI); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - enable_irq(IRQ_TC2OI); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* Not supported */ - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appear */ - break; - } -} - -static struct clock_event_device clockevent_clps711x = { - .name = "clps711x-clockevent", - .rating = 300, - .features = CLOCK_EVT_FEAT_PERIODIC, - .set_mode = clps711x_clockevent_set_mode, -}; - -static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) -{ - clockevent_clps711x.event_handler(&clockevent_clps711x); - - return IRQ_HANDLED; -} - -static struct irqaction clps711x_timer_irq = { - .name = "clps711x-timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = clps711x_timer_interrupt, -}; - -static void add_fixed_clk(struct clk *clk, const char *name, int rate) -{ - clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); - clk_register_clkdev(clk, name, NULL); -} - void __init clps711x_timer_init(void) { - int osc, ext, pll, cpu, bus, timl, timh, uart, spi; - u32 tmp; - - osc = 3686400; - ext = 13000000; - - tmp = clps_readl(PLLR) >> 24; - if (tmp) - pll = (osc * tmp) / 2; - else - pll = 73728000; /* Default value */ - - tmp = clps_readl(SYSFLG2); - if (tmp & SYSFLG2_CKMODE) { - cpu = ext; - bus = cpu; - spi = 135400; - pll = 0; - } else { - cpu = pll; - if (cpu >= 36864000) - bus = cpu / 2; - else - bus = 36864000 / 2; - spi = cpu / 576; - } - - uart = bus / 10; - - if (tmp & SYSFLG2_CKMODE) { - tmp = clps_readl(SYSCON2); - if (tmp & SYSCON2_OSTB) - timh = ext / 26; - else - timh = 541440; - } else - timh = DIV_ROUND_CLOSEST(cpu, 144); - - timl = DIV_ROUND_CLOSEST(timh, 256); - - /* All clocks are fixed */ - add_fixed_clk(clk_pll, "pll", pll); - add_fixed_clk(clk_bus, "bus", bus); - add_fixed_clk(clk_uart, "uart", uart); - add_fixed_clk(clk_timerl, "timer_lf", timl); - add_fixed_clk(clk_timerh, "timer_hf", timh); - add_fixed_clk(clk_tint, "tint", 64); - add_fixed_clk(clk_spi, "spi", spi); - - pr_info("CPU frequency set at %i Hz.\n", cpu); - - /* Start Timer1 in free running mode (Low frequency) */ - tmp = clps_readl(SYSCON1) & ~(SYSCON1_TC1S | SYSCON1_TC1M); - clps_writel(tmp, SYSCON1); - - sched_clock_register(clps711x_sched_clock_read, 16, timl); - - clocksource_mmio_init(CLPS711X_VIRT_BASE + TC1D, - "clps711x_clocksource", timl, 300, 16, - clocksource_mmio_readw_down); - - /* Set Timer2 prescaler */ - clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D); - - /* Start Timer2 in prescale mode (High frequency)*/ - tmp = clps_readl(SYSCON1) | SYSCON1_TC2M | SYSCON1_TC2S; - clps_writel(tmp, SYSCON1); - - clockevents_config_and_register(&clockevent_clps711x, timh, 0, 0); - - setup_irq(IRQ_TC2OI, &clps711x_timer_irq); + clps711x_clk_init(CLPS711X_VIRT_BASE); + clps711x_clksrc_init(CLPS711X_VIRT_BASE + TC1D, + CLPS711X_VIRT_BASE + TC2D, IRQ_TC2OI); } void clps711x_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index f881899..370200b 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h
@@ -16,3 +16,8 @@ /* drivers/irqchip/irq-clps711x.c */ void clps711x_intc_init(phys_addr_t, resource_size_t); +/* drivers/clk/clk-clps711x.c */ +void clps711x_clk_init(void __iomem *base); +/* drivers/clocksource/clps711x-timer.c */ +void clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base, + unsigned int irq);
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c index 0c689d3..77a9617 100644 --- a/arch/arm/mach-clps711x/devices.c +++ b/arch/arm/mach-clps711x/devices.c
@@ -1,7 +1,7 @@ /* * CLPS711X common devices definitions * - * Author: Alexander Shiyan <shc_work@mail.ru>, 2013 + * Author: Alexander Shiyan <shc_work@mail.ru>, 2013-2014 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -9,8 +9,15 @@ * (at your option) any later version. */ +#include <linux/io.h> +#include <linux/of_fdt.h> #include <linux/platform_device.h> +#include <linux/random.h> #include <linux/sizes.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> + +#include <asm/system_info.h> #include <mach/hardware.h> @@ -90,10 +97,53 @@ ARRAY_SIZE(clps711x_uart2_res)); }; +static void __init clps711x_soc_init(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + void __iomem *base; + u32 id[5]; + + base = ioremap(CLPS711X_PHYS_BASE, SZ_32K); + if (!base) + return; + + id[0] = readl(base + UNIQID); + id[1] = readl(base + RANDID0); + id[2] = readl(base + RANDID1); + id[3] = readl(base + RANDID2); + id[4] = readl(base + RANDID3); + system_rev = SYSFLG1_VERID(readl(base + SYSFLG1)); + + add_device_randomness(id, sizeof(id)); + + system_serial_low = id[0]; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + goto out_unmap; + + soc_dev_attr->machine = of_flat_dt_get_machine_name(); + soc_dev_attr->family = "Cirrus Logic CLPS711X"; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%u", system_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%08x", id[0]); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + } + +out_unmap: + iounmap(base); +} + void __init clps711x_devices_init(void) { clps711x_add_cpuidle(); clps711x_add_gpio(); clps711x_add_syscon(); clps711x_add_uart(); + clps711x_soc_init(); }
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index d863d87..6428bcc7 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -250,5 +250,6 @@ .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, .init_machine = cns3420_init, + .init_late = cns3xxx_pcie_init_late, .restart = cns3xxx_restart, MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index f85449a..4e9837d 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c
@@ -404,5 +404,6 @@ .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, .init_machine = cns3xxx_init, + .init_late = cns3xxx_pcie_init_late, .restart = cns3xxx_restart, MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h index 5218b61..dc5df7f 100644 --- a/arch/arm/mach-cns3xxx/core.h +++ b/arch/arm/mach-cns3xxx/core.h
@@ -21,6 +21,12 @@ static inline void cns3xxx_l2x0_init(void) {} #endif /* CONFIG_CACHE_L2X0 */ +#ifdef CONFIG_PCI +extern void __init cns3xxx_pcie_init_late(void); +#else +static inline void __init cns3xxx_pcie_init_late(void) {} +#endif + void __init cns3xxx_map_io(void); void __init cns3xxx_init_irq(void); void cns3xxx_power_off(void);
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 413134c..45d6bd0 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -60,11 +60,10 @@ struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus); int busno = bus->number; int slot = PCI_SLOT(devfn); - int offset; void __iomem *base; /* If there is no link, just show the CNS PCI bridge. */ - if (!cnspci->linked && (busno > 0 || slot > 0)) + if (!cnspci->linked && busno > 0) return NULL; /* @@ -72,22 +71,21 @@ * we still want to access it. For this to work, we must place * the first device on the same bus as the CNS PCI bridge. */ - if (busno == 0) { /* directly connected PCIe bus */ - switch (slot) { - case 0: /* host bridge device, function 0 only */ + if (busno == 0) { /* internal PCIe bus, host bridge device */ + if (devfn == 0) /* device# and function# are ignored by hw */ base = cnspci->host_regs; - break; - case 1: /* directly connected device */ - base = cnspci->cfg0_regs; - break; - default: + else return NULL; /* no such device */ - } - } else /* remote PCI bus */ - base = cnspci->cfg1_regs; - offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc); - return base + offset; + } else if (busno == 1) { /* directly connected PCIe device */ + if (slot == 0) /* device# is ignored by hw */ + base = cnspci->cfg0_regs; + else + return NULL; /* no such device */ + } else /* remote PCI bus */ + base = cnspci->cfg1_regs + ((busno & 0xf) << 20); + + return base + (where & 0xffc) + (devfn << 12); } static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn, @@ -167,7 +165,7 @@ static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev); - int irq = cnspci->irqs[slot]; + int irq = cnspci->irqs[!!dev->bus->number]; pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n", pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn), @@ -297,15 +295,19 @@ return; /* Set Device Max_Read_Request_Size to 128 byte */ - devfn = PCI_DEVFN(1, 0); + bus.number = 1; /* directly connected PCIe device */ + devfn = PCI_DEVFN(0, 0); pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP); pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); - dc &= ~(0x3 << 12); /* Clear Device Control Register [14:12] */ - pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc); - pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); - if (!(dc & (0x3 << 12))) - pr_info("PCIe: Set Device Max_Read_Request_Size to 128 byte\n"); - + if (dc & PCI_EXP_DEVCTL_READRQ) { + dc &= ~PCI_EXP_DEVCTL_READRQ; + pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc); + pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); + if (dc & PCI_EXP_DEVCTL_READRQ) + pr_warn("PCIe: Unable to set device Max_Read_Request_Size\n"); + else + pr_info("PCIe: Max_Read_Request_Size set to 128 bytes\n"); + } /* Disable PCIe0 Interrupt Mask INTA to INTD */ __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port)); } @@ -318,7 +320,7 @@ return 0; } -static int __init cns3xxx_pcie_init(void) +void __init cns3xxx_pcie_init_late(void) { int i; @@ -337,7 +339,4 @@ } pci_assign_unassigned_resources(); - - return 0; } -device_initcall(cns3xxx_pcie_init);
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 234c5bb..fa11415 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -35,6 +35,7 @@ #include <linux/platform_data/uio_pruss.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> +#include <linux/regulator/fixed.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/wl12xx.h> @@ -842,6 +843,16 @@ return 0; } +/* Fixed regulator support */ +static struct regulator_consumer_supply fixed_supplies[] = { + /* Baseboard 3.3V: 5V -> TPS73701DCQ -> 3.3V */ + REGULATOR_SUPPLY("AVDD", "1-0018"), + REGULATOR_SUPPLY("DRVDD", "1-0018"), + + /* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */ + REGULATOR_SUPPLY("DVDD", "1-0018"), +}; + /* TPS65070 voltage regulator support */ /* 3.3V */ @@ -865,6 +876,7 @@ { .supply = "dvdd3318_c", }, + REGULATOR_SUPPLY("IOVDD", "1-0018"), }; /* 1.2V */ @@ -936,6 +948,7 @@ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS), .boot_on = 1, + .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers), .consumer_supplies = tps65070_dcdc2_consumers, @@ -1446,6 +1459,8 @@ if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + regulator_register_fixed(0, fixed_supplies, ARRAY_SIZE(fixed_supplies)); + ret = pmic_tps65070_init(); if (ret) pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index ed19287..f703d82 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -46,6 +46,7 @@ OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL), OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1", NULL), + OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL), {} };
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile index 935e4af..a7d68c1 100644 --- a/arch/arm/mach-ebsa110/Makefile +++ b/arch/arm/mach-ebsa110/Makefile
@@ -5,6 +5,3 @@ # Object file lists. obj-y := core.o io.o leds.o -obj-m := -obj-n := -obj- :=
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 0dc51f9..78d427b 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile
@@ -2,9 +2,6 @@ # Makefile for the linux kernel. # obj-y := core.o clock.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_EP93XX_DMA) += dma.o
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 788f26d..27ae614 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile
@@ -7,11 +7,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include -obj-y := -obj-m := -obj-n := -obj- := - # Core obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 6a24e11..6b283eb 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c
@@ -161,7 +161,9 @@ static struct platform_device exynos_cpuidle = { .name = "exynos_cpuidle", +#ifdef CONFIG_ARM_EXYNOS_CPUIDLE .dev.platform_data = exynos_enter_aftr, +#endif .id = -1, }; @@ -193,7 +195,6 @@ /* to be supported later */ return; - pm_genpd_poweroff_unused(); exynos_pm_init(); }
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h deleted file mode 100644 index e19df1f..0000000 --- a/arch/arm/mach-exynos/include/mach/memory.h +++ /dev/null
@@ -1,26 +0,0 @@ -/* - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H __FILE__ - -#define PLAT_PHYS_OFFSET UL(0x40000000) - -#ifndef CONFIG_ARM_LPAE -/* Maximum of 256MiB in one bank */ -#define MAX_PHYSMEM_BITS 32 -#define SECTION_SIZE_BITS 28 -#else -#define MAX_PHYSMEM_BITS 36 -#define SECTION_SIZE_BITS 31 -#endif - -#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index a9f1cf7..41ae28d 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c
@@ -224,7 +224,7 @@ ret = PTR_ERR(boot_reg); goto fail; } - __raw_writel(boot_addr, cpu_boot_reg(core_id)); + __raw_writel(boot_addr, boot_reg); } call_firmware_op(cpu_boot, core_id); @@ -313,7 +313,7 @@ if (IS_ERR(boot_reg)) break; - __raw_writel(boot_addr, cpu_boot_reg(core_id)); + __raw_writel(boot_addr, boot_reg); } } }
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index fd76e1b..20f2671 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c
@@ -105,78 +105,6 @@ return exynos_pd_power(domain, false); } -static void exynos_add_device_to_domain(struct exynos_pm_domain *pd, - struct device *dev) -{ - int ret; - - dev_dbg(dev, "adding to power domain %s\n", pd->pd.name); - - while (1) { - ret = pm_genpd_add_device(&pd->pd, dev); - if (ret != -EAGAIN) - break; - cond_resched(); - } - - pm_genpd_dev_need_restore(dev, true); -} - -static void exynos_remove_device_from_domain(struct device *dev) -{ - struct generic_pm_domain *genpd = dev_to_genpd(dev); - int ret; - - dev_dbg(dev, "removing from power domain %s\n", genpd->name); - - while (1) { - ret = pm_genpd_remove_device(genpd, dev); - if (ret != -EAGAIN) - break; - cond_resched(); - } -} - -static void exynos_read_domain_from_dt(struct device *dev) -{ - struct platform_device *pd_pdev; - struct exynos_pm_domain *pd; - struct device_node *node; - - node = of_parse_phandle(dev->of_node, "samsung,power-domain", 0); - if (!node) - return; - pd_pdev = of_find_device_by_node(node); - if (!pd_pdev) - return; - pd = platform_get_drvdata(pd_pdev); - exynos_add_device_to_domain(pd, dev); -} - -static int exynos_pm_notifier_call(struct notifier_block *nb, - unsigned long event, void *data) -{ - struct device *dev = data; - - switch (event) { - case BUS_NOTIFY_BIND_DRIVER: - if (dev->of_node) - exynos_read_domain_from_dt(dev); - - break; - - case BUS_NOTIFY_UNBOUND_DRIVER: - exynos_remove_device_from_domain(dev); - - break; - } - return NOTIFY_DONE; -} - -static struct notifier_block platform_nb = { - .notifier_call = exynos_pm_notifier_call, -}; - static __init int exynos4_pm_init_power_domain(void) { struct platform_device *pdev; @@ -202,7 +130,6 @@ pd->base = of_iomap(np, 0); pd->pd.power_off = exynos_pd_power_off; pd->pd.power_on = exynos_pd_power_on; - pd->pd.of_node = np; pd->oscclk = clk_get(dev, "oscclk"); if (IS_ERR(pd->oscclk)) @@ -228,15 +155,12 @@ clk_put(pd->oscclk); no_clk: - platform_set_drvdata(pdev, pd); - on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN; pm_genpd_init(&pd->pd, NULL, !on); + of_genpd_add_provider_simple(np, &pd->pd); } - bus_register_notifier(&platform_bus_type, &platform_nb); - return 0; } arch_initcall(exynos4_pm_init_power_domain);
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index c3faa3b..e83d5c8 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile
@@ -5,9 +5,6 @@ # Object file lists. obj-y := common.o dma.o isa-irq.o -obj-m := -obj-n := -obj- := pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 8c35ae4..07a0957 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c
@@ -20,7 +20,7 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/irqchip.h> -#include <linux/mailbox.h> +#include <linux/pl320-ipc.h> #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_platform.h>
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 9848829..cd19433 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig
@@ -1,6 +1,6 @@ config ARCH_HISI bool "Hisilicon SoC Support" - depends on ARCH_MULTIPLATFORM + depends on ARCH_MULTI_V7 select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 @@ -22,6 +22,15 @@ help Support for Hisilicon Hi36xx SoC family +config ARCH_HIP04 + bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7 + select ARM_ERRATA_798181 if SMP + select HAVE_ARM_ARCH_TIMER + select MCPM if SMP + select MCPM_QUAD_CLUSTER if SMP + help + Support for Hisilicon HiP04 SoC family + config ARCH_HIX5HD2 bool "Hisilicon X5HD2 family" if ARCH_MULTI_V7 select CACHE_L2X0
diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile index ee2506b..6b7b303 100644 --- a/arch/arm/mach-hisi/Makefile +++ b/arch/arm/mach-hisi/Makefile
@@ -2,5 +2,8 @@ # Makefile for Hisilicon processors family # +CFLAGS_platmcpm.o := -march=armv7-a + obj-y += hisilicon.o +obj-$(CONFIG_MCPM) += platmcpm.o obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o
diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c index 7cda6dd..7744c35 100644 --- a/arch/arm/mach-hisi/hisilicon.c +++ b/arch/arm/mach-hisi/hisilicon.c
@@ -63,3 +63,12 @@ DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)") .dt_compat = hix5hd2_compat, MACHINE_END + +static const char *hip04_compat[] __initconst = { + "hisilicon,hip04-d01", + NULL, +}; + +DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)") + .dt_compat = hip04_compat, +MACHINE_END
diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c new file mode 100644 index 0000000..280f3f1 --- /dev/null +++ b/arch/arm/mach-hisi/platmcpm.c
@@ -0,0 +1,386 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/memblock.h> +#include <linux/of_address.h> + +#include <asm/cputype.h> +#include <asm/cp15.h> +#include <asm/mcpm.h> + +#include "core.h" + +/* bits definition in SC_CPU_RESET_REQ[x]/SC_CPU_RESET_DREQ[x] + * 1 -- unreset; 0 -- reset + */ +#define CORE_RESET_BIT(x) (1 << x) +#define NEON_RESET_BIT(x) (1 << (x + 4)) +#define CORE_DEBUG_RESET_BIT(x) (1 << (x + 9)) +#define CLUSTER_L2_RESET_BIT (1 << 8) +#define CLUSTER_DEBUG_RESET_BIT (1 << 13) + +/* + * bits definition in SC_CPU_RESET_STATUS[x] + * 1 -- reset status; 0 -- unreset status + */ +#define CORE_RESET_STATUS(x) (1 << x) +#define NEON_RESET_STATUS(x) (1 << (x + 4)) +#define CORE_DEBUG_RESET_STATUS(x) (1 << (x + 9)) +#define CLUSTER_L2_RESET_STATUS (1 << 8) +#define CLUSTER_DEBUG_RESET_STATUS (1 << 13) +#define CORE_WFI_STATUS(x) (1 << (x + 16)) +#define CORE_WFE_STATUS(x) (1 << (x + 20)) +#define CORE_DEBUG_ACK(x) (1 << (x + 24)) + +#define SC_CPU_RESET_REQ(x) (0x520 + (x << 3)) /* reset */ +#define SC_CPU_RESET_DREQ(x) (0x524 + (x << 3)) /* unreset */ +#define SC_CPU_RESET_STATUS(x) (0x1520 + (x << 3)) + +#define FAB_SF_MODE 0x0c +#define FAB_SF_INVLD 0x10 + +/* bits definition in FB_SF_INVLD */ +#define FB_SF_INVLD_START (1 << 8) + +#define HIP04_MAX_CLUSTERS 4 +#define HIP04_MAX_CPUS_PER_CLUSTER 4 + +#define POLL_MSEC 10 +#define TIMEOUT_MSEC 1000 + +static void __iomem *sysctrl, *fabric; +static int hip04_cpu_table[HIP04_MAX_CLUSTERS][HIP04_MAX_CPUS_PER_CLUSTER]; +static DEFINE_SPINLOCK(boot_lock); +static u32 fabric_phys_addr; +/* + * [0]: bootwrapper physical address + * [1]: bootwrapper size + * [2]: relocation address + * [3]: relocation size + */ +static u32 hip04_boot_method[4]; + +static bool hip04_cluster_is_down(unsigned int cluster) +{ + int i; + + for (i = 0; i < HIP04_MAX_CPUS_PER_CLUSTER; i++) + if (hip04_cpu_table[cluster][i]) + return false; + return true; +} + +static void hip04_set_snoop_filter(unsigned int cluster, unsigned int on) +{ + unsigned long data; + + if (!fabric) + BUG(); + data = readl_relaxed(fabric + FAB_SF_MODE); + if (on) + data |= 1 << cluster; + else + data &= ~(1 << cluster); + writel_relaxed(data, fabric + FAB_SF_MODE); + do { + cpu_relax(); + } while (data != readl_relaxed(fabric + FAB_SF_MODE)); +} + +static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned long data; + void __iomem *sys_dreq, *sys_status; + + if (!sysctrl) + return -ENODEV; + if (cluster >= HIP04_MAX_CLUSTERS || cpu >= HIP04_MAX_CPUS_PER_CLUSTER) + return -EINVAL; + + spin_lock_irq(&boot_lock); + + if (hip04_cpu_table[cluster][cpu]) + goto out; + + sys_dreq = sysctrl + SC_CPU_RESET_DREQ(cluster); + sys_status = sysctrl + SC_CPU_RESET_STATUS(cluster); + if (hip04_cluster_is_down(cluster)) { + data = CLUSTER_DEBUG_RESET_BIT; + writel_relaxed(data, sys_dreq); + do { + cpu_relax(); + data = readl_relaxed(sys_status); + } while (data & CLUSTER_DEBUG_RESET_STATUS); + } + + data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \ + CORE_DEBUG_RESET_BIT(cpu); + writel_relaxed(data, sys_dreq); + do { + cpu_relax(); + } while (data == readl_relaxed(sys_status)); + /* + * We may fail to power up core again without this delay. + * It's not mentioned in document. It's found by test. + */ + udelay(20); +out: + hip04_cpu_table[cluster][cpu]++; + spin_unlock_irq(&boot_lock); + + return 0; +} + +static void hip04_mcpm_power_down(void) +{ + unsigned int mpidr, cpu, cluster; + bool skip_wfi = false, last_man = false; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + __mcpm_cpu_going_down(cpu, cluster); + + spin_lock(&boot_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + hip04_cpu_table[cluster][cpu]--; + if (hip04_cpu_table[cluster][cpu] == 1) { + /* A power_up request went ahead of us. */ + skip_wfi = true; + } else if (hip04_cpu_table[cluster][cpu] > 1) { + pr_err("Cluster %d CPU%d boots multiple times\n", cluster, cpu); + BUG(); + } + + last_man = hip04_cluster_is_down(cluster); + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + spin_unlock(&boot_lock); + /* Since it's Cortex A15, disable L2 prefetching. */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3 \n\t" + "isb \n\t" + "dsb " + : : "r" (0x400) ); + v7_exit_coherency_flush(all); + hip04_set_snoop_filter(cluster, 0); + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + spin_unlock(&boot_lock); + v7_exit_coherency_flush(louis); + } + + __mcpm_cpu_down(cpu, cluster); + + if (!skip_wfi) + wfi(); +} + +static int hip04_mcpm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) +{ + unsigned int data, tries, count; + int ret = -ETIMEDOUT; + + BUG_ON(cluster >= HIP04_MAX_CLUSTERS || + cpu >= HIP04_MAX_CPUS_PER_CLUSTER); + + count = TIMEOUT_MSEC / POLL_MSEC; + spin_lock_irq(&boot_lock); + for (tries = 0; tries < count; tries++) { + if (hip04_cpu_table[cluster][cpu]) { + ret = -EBUSY; + goto err; + } + cpu_relax(); + data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster)); + if (data & CORE_WFI_STATUS(cpu)) + break; + spin_unlock_irq(&boot_lock); + /* Wait for clean L2 when the whole cluster is down. */ + msleep(POLL_MSEC); + spin_lock_irq(&boot_lock); + } + if (tries >= count) + goto err; + data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \ + CORE_DEBUG_RESET_BIT(cpu); + writel_relaxed(data, sysctrl + SC_CPU_RESET_REQ(cluster)); + for (tries = 0; tries < count; tries++) { + cpu_relax(); + data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster)); + if (data & CORE_RESET_STATUS(cpu)) + break; + } + if (tries >= count) + goto err; + spin_unlock_irq(&boot_lock); + return 0; +err: + spin_unlock_irq(&boot_lock); + return ret; +} + +static void hip04_mcpm_powered_up(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + spin_lock(&boot_lock); + if (!hip04_cpu_table[cluster][cpu]) + hip04_cpu_table[cluster][cpu] = 1; + spin_unlock(&boot_lock); +} + +static void __naked hip04_mcpm_power_up_setup(unsigned int affinity_level) +{ + asm volatile (" \n" +" cmp r0, #0 \n" +" bxeq lr \n" + /* calculate fabric phys address */ +" adr r2, 2f \n" +" ldmia r2, {r1, r3} \n" +" sub r0, r2, r1 \n" +" ldr r2, [r0, r3] \n" + /* get cluster id from MPIDR */ +" mrc p15, 0, r0, c0, c0, 5 \n" +" ubfx r1, r0, #8, #8 \n" + /* 1 << cluster id */ +" mov r0, #1 \n" +" mov r3, r0, lsl r1 \n" +" ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n" +" tst r0, r3 \n" +" bxne lr \n" +" orr r1, r0, r3 \n" +" str r1, [r2, #"__stringify(FAB_SF_MODE)"] \n" +"1: ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n" +" tst r0, r3 \n" +" beq 1b \n" +" bx lr \n" + +" .align 2 \n" +"2: .word . \n" +" .word fabric_phys_addr \n" + ); +} + +static const struct mcpm_platform_ops hip04_mcpm_ops = { + .power_up = hip04_mcpm_power_up, + .power_down = hip04_mcpm_power_down, + .wait_for_powerdown = hip04_mcpm_wait_for_powerdown, + .powered_up = hip04_mcpm_powered_up, +}; + +static bool __init hip04_cpu_table_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + if (cluster >= HIP04_MAX_CLUSTERS || + cpu >= HIP04_MAX_CPUS_PER_CLUSTER) { + pr_err("%s: boot CPU is out of bound!\n", __func__); + return false; + } + hip04_set_snoop_filter(cluster, 1); + hip04_cpu_table[cluster][cpu] = 1; + return true; +} + +static int __init hip04_mcpm_init(void) +{ + struct device_node *np, *np_sctl, *np_fab; + struct resource fab_res; + void __iomem *relocation; + int ret = -ENODEV; + + np = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-bootwrapper"); + if (!np) + goto err; + ret = of_property_read_u32_array(np, "boot-method", + &hip04_boot_method[0], 4); + if (ret) + goto err; + np_sctl = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); + if (!np_sctl) + goto err; + np_fab = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-fabric"); + if (!np_fab) + goto err; + + ret = memblock_reserve(hip04_boot_method[0], hip04_boot_method[1]); + if (ret) + goto err; + + relocation = ioremap(hip04_boot_method[2], hip04_boot_method[3]); + if (!relocation) { + pr_err("failed to map relocation space\n"); + ret = -ENOMEM; + goto err_reloc; + } + sysctrl = of_iomap(np_sctl, 0); + if (!sysctrl) { + pr_err("failed to get sysctrl base\n"); + ret = -ENOMEM; + goto err_sysctrl; + } + ret = of_address_to_resource(np_fab, 0, &fab_res); + if (ret) { + pr_err("failed to get fabric base phys\n"); + goto err_fabric; + } + fabric_phys_addr = fab_res.start; + sync_cache_w(&fabric_phys_addr); + fabric = of_iomap(np_fab, 0); + if (!fabric) { + pr_err("failed to get fabric base\n"); + ret = -ENOMEM; + goto err_fabric; + } + + if (!hip04_cpu_table_init()) { + ret = -EINVAL; + goto err_table; + } + ret = mcpm_platform_register(&hip04_mcpm_ops); + if (ret) { + goto err_table; + } + + /* + * Fill the instruction address that is used after secondary core + * out of reset. + */ + writel_relaxed(hip04_boot_method[0], relocation); + writel_relaxed(0xa5a5a5a5, relocation + 4); /* magic number */ + writel_relaxed(virt_to_phys(mcpm_entry_point), relocation + 8); + writel_relaxed(0, relocation + 12); + iounmap(relocation); + + mcpm_sync_init(hip04_mcpm_power_up_setup); + mcpm_smp_set_ops(); + pr_info("HiP04 MCPM initialized\n"); + return ret; +err_table: + iounmap(fabric); +err_fabric: + iounmap(sysctrl); +err_sysctrl: + iounmap(relocation); +err_reloc: + memblock_free(hip04_boot_method[0], hip04_boot_method[1]); +err: + return ret; +} +early_initcall(hip04_mcpm_init);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index be9a51a..11b2957 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig
@@ -69,6 +69,7 @@ select CPU_ARM920T select IMX_HAVE_IOMUX_V1 select MXC_AVIC + select PINCTRL_IMX1 config SOC_IMX21 bool @@ -108,17 +109,6 @@ if ARCH_MULTI_V4T comment "MX1 platforms:" -config MACH_MXLADS - bool - -config ARCH_MX1ADS - bool "MX1ADS platform" - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select MACH_MXLADS - select SOC_IMX1 - help - Say Y here if you are using Motorola MX1ADS/MXLADS boards config MACH_SCB9328 bool "Synertronixx scb9328" @@ -135,6 +125,13 @@ help Say Yes here if you are using the Armadeus APF9328 development board +config MACH_IMX1_DT + bool "Support i.MX1 platforms from device tree" + select SOC_IMX1 + help + Include support for Freescale i.MX1 based platforms + using the device tree for discovery. + endif if ARCH_MULTI_V5 @@ -223,86 +220,6 @@ Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. -config MACH_PCM038 - bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select IMX_HAVE_PLATFORM_SPI_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for phyCORE-i.MX27 (aka pcm038) platform. This - includes specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_PCM038 - default MACH_PCM970_BASEBOARD - -config MACH_PCM970_BASEBOARD - bool "PHYTEC PCM970 development board" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_MXC_MMC - help - This adds board specific devices that can be found on Phytec's - PCM970 evaluation board. - -endchoice - -config MACH_CPUIMX27 - bool "Eukrea CPUIMX27 module" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for Eukrea CPUIMX27 platform. This includes - specific configurations for the module and its peripherals. - -config MACH_EUKREA_CPUIMX27_USESDHC2 - bool "CPUIMX27 integrates SDHC2 module" - depends on MACH_CPUIMX27 - select IMX_HAVE_PLATFORM_MXC_MMC - help - This adds support for the internal SDHC2 used on CPUIMX27 - for wifi or eMMC. - -config MACH_EUKREA_CPUIMX27_USEUART4 - bool "CPUIMX27 integrates UART4 module" - depends on MACH_CPUIMX27 - help - This adds support for the internal UART4 used on CPUIMX27 - for bluetooth. - -choice - prompt "Baseboard" - depends on MACH_CPUIMX27 - default MACH_EUKREA_MBIMX27_BASEBOARD - -config MACH_EUKREA_MBIMX27_BASEBOARD - bool "Eukrea MBIMX27 development board" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX27 evaluation board. - -endchoice - config MACH_MX27_3DS bool "MX27PDK platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC @@ -359,18 +276,6 @@ Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. -config MACH_MXT_TD60 - bool "Maxtrack i-MXT TD60" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select SOC_IMX27 - help - Include support for i-MXT (aka td60) platform. This - includes specific configurations for the module and its peripherals. - config MACH_IMX27_DT bool "Support i.MX27 platforms from device tree" select SOC_IMX27
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 23c0293..6e4fcd8 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile
@@ -16,7 +16,8 @@ obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o \ - clk-fixup-div.o clk-fixup-mux.o + clk-fixup-div.o clk-fixup-mux.o \ + clk-gate-exclusive.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o @@ -41,9 +42,9 @@ endif # i.MX1 based machines -obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o +obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o # i.MX21 based machines obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o @@ -56,14 +57,9 @@ # i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o -obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o -obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o -obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o -obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o -obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o # i.MX31 based machines
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 4a40bbb4..8259a62 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c
@@ -104,6 +104,19 @@ case 2: revision = IMX_CHIP_REVISION_1_2; break; + case 3: + revision = IMX_CHIP_REVISION_1_3; + break; + case 4: + revision = IMX_CHIP_REVISION_1_4; + break; + case 5: + /* + * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked + * as 'D' in Part Number last character. + */ + revision = IMX_CHIP_REVISION_1_5; + break; default: revision = IMX_CHIP_REVISION_UNKNOWN; }
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 24b103c..1a89323 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c
@@ -144,7 +144,7 @@ if (nivector == 0xffff) break; - handle_IRQ(irq_find_mapping(domain, nivector), regs); + handle_domain_irq(domain, nivector, regs); } while (1); }
diff --git a/arch/arm/mach-imx/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h deleted file mode 100644 index 6f371e3..0000000 --- a/arch/arm/mach-imx/board-pcm038.h +++ /dev/null
@@ -1,36 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ -#define __ASM_ARCH_MXC_BOARD_PCM038_H__ - -#ifndef __ASSEMBLY__ -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls the baseboard's init function. - * TODO: Add your own baseboard init function and call it from - * inside pcm038_init(). - * - * This example here is for the development board. Refer pcm970-baseboard.c - */ - -extern void pcm970_baseboard_init(void); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/arch/arm/mach-imx/clk-gate-exclusive.c b/arch/arm/mach-imx/clk-gate-exclusive.c new file mode 100644 index 0000000..c12f5f2 --- /dev/null +++ b/arch/arm/mach-imx/clk-gate-exclusive.c
@@ -0,0 +1,94 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include "clk.h" + +/** + * struct clk_gate_exclusive - i.MX specific gate clock which is mutually + * exclusive with other gate clocks + * + * @gate: the parent class + * @exclusive_mask: mask of gate bits which are mutually exclusive to this + * gate clock + * + * The imx exclusive gate clock is a subclass of basic clk_gate + * with an addtional mask to indicate which other gate bits in the same + * register is mutually exclusive to this gate clock. + */ +struct clk_gate_exclusive { + struct clk_gate gate; + u32 exclusive_mask; +}; + +static int clk_gate_exclusive_enable(struct clk_hw *hw) +{ + struct clk_gate *gate = container_of(hw, struct clk_gate, hw); + struct clk_gate_exclusive *exgate = container_of(gate, + struct clk_gate_exclusive, gate); + u32 val = readl(gate->reg); + + if (val & exgate->exclusive_mask) + return -EBUSY; + + return clk_gate_ops.enable(hw); +} + +static void clk_gate_exclusive_disable(struct clk_hw *hw) +{ + clk_gate_ops.disable(hw); +} + +static int clk_gate_exclusive_is_enabled(struct clk_hw *hw) +{ + return clk_gate_ops.is_enabled(hw); +} + +static const struct clk_ops clk_gate_exclusive_ops = { + .enable = clk_gate_exclusive_enable, + .disable = clk_gate_exclusive_disable, + .is_enabled = clk_gate_exclusive_is_enabled, +}; + +struct clk *imx_clk_gate_exclusive(const char *name, const char *parent, + void __iomem *reg, u8 shift, u32 exclusive_mask) +{ + struct clk_gate_exclusive *exgate; + struct clk_gate *gate; + struct clk *clk; + struct clk_init_data init; + + if (exclusive_mask == 0) + return ERR_PTR(-EINVAL); + + exgate = kzalloc(sizeof(*exgate), GFP_KERNEL); + if (!exgate) + return ERR_PTR(-ENOMEM); + gate = &exgate->gate; + + init.name = name; + init.ops = &clk_gate_exclusive_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent ? &parent : NULL; + init.num_parents = parent ? 1 : 0; + + gate->reg = reg; + gate->bit_idx = shift; + gate->lock = &imx_ccm_lock; + gate->hw.init = &init; + exgate->exclusive_mask = exclusive_mask; + + clk = clk_register(NULL, &gate->hw); + if (IS_ERR(clk)) + kfree(exgate); + + return clk; +}
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 84acdfd..5a75cdc 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c
@@ -97,7 +97,7 @@ struct clk_gate2 *gate = to_clk_gate2(hw); if (gate->share_count) - return !!(*gate->share_count); + return !!__clk_get_enable_count(hw->clk); else return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); } @@ -127,10 +127,6 @@ gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; - - /* Initialize share_count per hardware state */ - if (share_count) - *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0; gate->share_count = share_count; init.name = name;
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 29d4129..4e79da7 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -50,8 +50,8 @@ static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; -static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; -static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *eim_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; +static const char *eim_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", @@ -64,7 +64,7 @@ "ipu2", "vdo_axi", "osc", "gpu2d_core", "gpu3d_core", "usdhc2", "ssi1", "ssi2", "ssi3", "gpu3d_shader", "vpu_axi", "can_root", - "ldb_di0", "ldb_di1", "esai", "eim_slow", + "ldb_di0", "ldb_di1", "esai_extal", "eim_slow", "uart_serial", "spdif", "asrc", "hsi_tx", }; static const char *cko_sels[] = { "cko1", "cko2", }; @@ -73,6 +73,14 @@ "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref", "pcie_ref_125m", "sata_ref_100m", }; +static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static struct clk *clk[IMX6QDL_CLK_END]; static struct clk_onecell_data clk_data; @@ -107,6 +115,10 @@ }; static unsigned int share_count_esai; +static unsigned int share_count_asrc; +static unsigned int share_count_ssi1; +static unsigned int share_count_ssi2; +static unsigned int share_count_ssi3; static void __init imx6q_clocks_init(struct device_node *ccm_node) { @@ -119,6 +131,9 @@ clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0); clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0); + /* Clock source from external clock via CLK1/2 PADs */ + clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); + clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); base = of_iomap(np, 0); @@ -132,14 +147,47 @@ video_div_table[2].div = 1; }; - /* type name parent_name base div_mask */ - clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); - clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); - clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); - clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); - clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); - clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); - clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3); + clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[IMX6QDL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + /* type name parent_name base div_mask */ + clk[IMX6QDL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clk[IMX6QDL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clk[IMX6QDL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clk[IMX6QDL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clk[IMX6QDL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clk[IMX6QDL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clk[IMX6QDL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + clk[IMX6QDL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clk[IMX6QDL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clk[IMX6QDL_PLL1_BYPASS], clk[IMX6QDL_CLK_PLL1]); + clk_set_parent(clk[IMX6QDL_PLL2_BYPASS], clk[IMX6QDL_CLK_PLL2]); + clk_set_parent(clk[IMX6QDL_PLL3_BYPASS], clk[IMX6QDL_CLK_PLL3]); + clk_set_parent(clk[IMX6QDL_PLL4_BYPASS], clk[IMX6QDL_CLK_PLL4]); + clk_set_parent(clk[IMX6QDL_PLL5_BYPASS], clk[IMX6QDL_CLK_PLL5]); + clk_set_parent(clk[IMX6QDL_PLL6_BYPASS], clk[IMX6QDL_CLK_PLL6]); + clk_set_parent(clk[IMX6QDL_PLL7_BYPASS], clk[IMX6QDL_CLK_PLL7]); + + clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); + clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); /* * Bit 20 is the reserved and read-only bit, we do this only for: @@ -176,8 +224,11 @@ * the "output_enable" bit as a gate, even though it's really just * enabling clock output. */ - clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10); - clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11); + clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12)); + clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13)); + + clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); + clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate_exclusive("lvds2_in", "anaclk2", base + 0x160, 13, BIT(11)); /* name parent_name reg idx */ clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); @@ -194,6 +245,7 @@ clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); + clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); if (cpu_is_imx6dl()) { clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); @@ -250,8 +302,8 @@ clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); - clk[IMX6QDL_CLK_EMI_SEL] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_EMI_SLOW_SEL] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup); + clk[IMX6QDL_CLK_EIM_SEL] = imx_clk_fixup_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels), imx_cscmr1_fixup); + clk[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_fixup_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels), imx_cscmr1_fixup); clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels)); clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels)); clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); @@ -302,8 +354,8 @@ clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3); clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6); - clk[IMX6QDL_CLK_EMI_PODF] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup); - clk[IMX6QDL_CLK_EMI_SLOW_PODF] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup); + clk[IMX6QDL_CLK_EIM_PODF] = imx_clk_fixup_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup); + clk[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_fixup_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup); clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3); clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3); @@ -317,7 +369,9 @@ /* name parent_name reg shift */ clk[IMX6QDL_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); - clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6); + clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2_shared("asrc", "asrc_podf", base + 0x68, 6, &share_count_asrc); + clk[IMX6QDL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); + clk[IMX6QDL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); clk[IMX6QDL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); clk[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16); clk[IMX6QDL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18); @@ -331,8 +385,9 @@ else clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); - clk[IMX6QDL_CLK_ESAI] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai); - clk[IMX6QDL_CLK_ESAI_AHB] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai); + clk[IMX6QDL_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); + clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ipg", base + 0x6c, 16, &share_count_esai); + clk[IMX6QDL_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); if (cpu_is_imx6dl()) @@ -388,9 +443,12 @@ clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14); - clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18); - clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20); - clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22); + clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); + clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); + clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); + clk[IMX6QDL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); + clk[IMX6QDL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); + clk[IMX6QDL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); clk[IMX6QDL_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); clk[IMX6QDL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26); clk[IMX6QDL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); @@ -398,12 +456,19 @@ clk[IMX6QDL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); clk[IMX6QDL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); clk[IMX6QDL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); - clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10); + clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10); clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12); clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14); clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24); + /* + * The gpt_3m clock is not available on i.MX6Q TO1.0. Let's point it + * to clock gpt_ipg_per to ease the gpt driver code. + */ + if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) + clk[IMX6QDL_CLK_GPT_3M] = clk[IMX6QDL_CLK_GPT_IPG_PER]; + imx_check_clocks(clk, ARRAY_SIZE(clk)); clk_data.clks = clk;
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index fef46fa..e982ebe 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -43,11 +43,13 @@ static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; -static const char *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; +static const char *csi_sels[] = { "osc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; +static const char *lcdif_axi_sels[] = { "pll2_bus", "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", }; static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", }; static const char *perclk_sels[] = { "ipg", "osc", }; -static const char *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; +static const char *pxp_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd3", }; +static const char *epdc_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd2", }; static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; @@ -55,6 +57,20 @@ static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; static const char *ecspi_sels[] = { "pll3_60m", "osc", }; static const char *uart_sels[] = { "pll3_80m", "osc", }; +static const char *lvds_sels[] = { + "pll1_sys", "pll2_bus", "pll2_pfd0", "pll2_pfd1", "pll2_pfd2", "dummy", "pll4_audio", "pll5_video", + "dummy", "enet_ref", "dummy", "dummy", "pll3_usb_otg", "pll7_usb_host", "pll3_pfd0", "pll3_pfd1", + "pll3_pfd2", "pll3_pfd3", "osc", "dummy", "dummy", "dummy", "dummy", "dummy", + "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", +}; +static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static struct clk_div_table clk_enet_ref_table[] = { { .val = 0, .div = 20, }, @@ -79,6 +95,10 @@ { } }; +static unsigned int share_count_ssi1; +static unsigned int share_count_ssi2; +static unsigned int share_count_ssi3; + static struct clk *clks[IMX6SL_CLK_END]; static struct clk_onecell_data clk_data; static void __iomem *ccm_base; @@ -175,20 +195,59 @@ clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); clks[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0); + /* Clock source from external clock via CLK1 PAD */ + clks[IMX6SL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop"); base = of_iomap(np, 0); WARN_ON(!base); anatop_base = base; - /* type name parent base div_mask */ - clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); - clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); - clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); - clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); - clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); - clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); - clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3); + clks[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + /* type name parent_name base div_mask */ + clks[IMX6SL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clks[IMX6SL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clks[IMX6SL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clks[IMX6SL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clks[IMX6SL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clks[IMX6SL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clks[IMX6SL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + clks[IMX6SL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clks[IMX6SL_PLL1_BYPASS], clks[IMX6SL_CLK_PLL1]); + clk_set_parent(clks[IMX6SL_PLL2_BYPASS], clks[IMX6SL_CLK_PLL2]); + clk_set_parent(clks[IMX6SL_PLL3_BYPASS], clks[IMX6SL_CLK_PLL3]); + clk_set_parent(clks[IMX6SL_PLL4_BYPASS], clks[IMX6SL_CLK_PLL4]); + clk_set_parent(clks[IMX6SL_PLL5_BYPASS], clks[IMX6SL_CLK_PLL5]); + clk_set_parent(clks[IMX6SL_PLL6_BYPASS], clks[IMX6SL_CLK_PLL6]); + clk_set_parent(clks[IMX6SL_PLL7_BYPASS], clks[IMX6SL_CLK_PLL7]); + + clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); + clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); + + clks[IMX6SL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + clks[IMX6SL_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12)); + clks[IMX6SL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); /* * usbphy1 and usbphy2 are implemented as dummy gates using reserve @@ -241,8 +300,8 @@ clks[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); clks[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); - clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels)); + clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels)); + clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, lcdif_axi_sels, ARRAY_SIZE(lcdif_axi_sels)); clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); @@ -251,8 +310,8 @@ clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); - clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels)); + clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, pxp_axi_sels, ARRAY_SIZE(pxp_axi_sels)); + clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_axi_sels, ARRAY_SIZE(epdc_axi_sels)); clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels)); clks[IMX6SL_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels)); clks[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels)); @@ -337,9 +396,12 @@ clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6); clks[IMX6SL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14); - clks[IMX6SL_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18); - clks[IMX6SL_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20); - clks[IMX6SL_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22); + clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); clks[IMX6SL_CLK_UART] = imx_clk_gate2("uart", "ipg", base + 0x7c, 24); clks[IMX6SL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_root", base + 0x7c, 26); clks[IMX6SL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); @@ -375,6 +437,13 @@ /* Audio-related clocks configuration */ clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]); + /* set PLL5 video as lcdif pix parent clock */ + clk_set_parent(clks[IMX6SL_CLK_LCDIF_PIX_SEL], + clks[IMX6SL_CLK_PLL5_VIDEO_DIV]); + + clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL], + clks[IMX6SL_CLK_PLL2_PFD2]); + /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); }
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c index ecde72b..17354a1 100644 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ b/arch/arm/mach-imx/clk-imx6sx.c
@@ -81,6 +81,14 @@ "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div", "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2", }; +static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static struct clk *clks[IMX6SX_CLK_CLK_END]; static struct clk_onecell_data clk_data; @@ -143,18 +151,54 @@ clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); + /* Clock source from external clock via CLK1 PAD */ + clks[IMX6SX_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop"); base = of_iomap(np, 0); WARN_ON(!base); - /* type name parent_name base div_mask */ - clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); - clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); - clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); - clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); - clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); - clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); - clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3); + clks[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SX_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + /* type name parent_name base div_mask */ + clks[IMX6SX_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clks[IMX6SX_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clks[IMX6SX_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clks[IMX6SX_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clks[IMX6SX_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clks[IMX6SX_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clks[IMX6SX_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + clks[IMX6SX_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clks[IMX6SX_PLL1_BYPASS], clks[IMX6SX_CLK_PLL1]); + clk_set_parent(clks[IMX6SX_PLL2_BYPASS], clks[IMX6SX_CLK_PLL2]); + clk_set_parent(clks[IMX6SX_PLL3_BYPASS], clks[IMX6SX_CLK_PLL3]); + clk_set_parent(clks[IMX6SX_PLL4_BYPASS], clks[IMX6SX_CLK_PLL4]); + clk_set_parent(clks[IMX6SX_PLL5_BYPASS], clks[IMX6SX_CLK_PLL5]); + clk_set_parent(clks[IMX6SX_PLL6_BYPASS], clks[IMX6SX_CLK_PLL6]); + clk_set_parent(clks[IMX6SX_PLL7_BYPASS], clks[IMX6SX_CLK_PLL7]); + + clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); + clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); /* * Bit 20 is the reserved and read-only bit, we do this only for: @@ -176,7 +220,8 @@ clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5); clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); - clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10); + clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12)); + clks[IMX6SX_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, base + 0xe0, 0, 2, 0, clk_enet_ref_table,
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index 6136405..57de74d 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -23,8 +23,6 @@ #define PLL_DENOM_OFFSET 0x20 #define BM_PLL_POWER (0x1 << 12) -#define BM_PLL_ENABLE (0x1 << 13) -#define BM_PLL_BYPASS (0x1 << 16) #define BM_PLL_LOCK (0x1 << 31) /** @@ -84,10 +82,6 @@ if (ret) return ret; - val = readl_relaxed(pll->base); - val &= ~BM_PLL_BYPASS; - writel_relaxed(val, pll->base); - return 0; } @@ -97,7 +91,6 @@ u32 val; val = readl_relaxed(pll->base); - val |= BM_PLL_BYPASS; if (pll->powerup_set) val &= ~BM_PLL_POWER; else @@ -105,28 +98,6 @@ writel_relaxed(val, pll->base); } -static int clk_pllv3_enable(struct clk_hw *hw) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val; - - val = readl_relaxed(pll->base); - val |= BM_PLL_ENABLE; - writel_relaxed(val, pll->base); - - return 0; -} - -static void clk_pllv3_disable(struct clk_hw *hw) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val; - - val = readl_relaxed(pll->base); - val &= ~BM_PLL_ENABLE; - writel_relaxed(val, pll->base); -} - static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { @@ -169,8 +140,6 @@ static const struct clk_ops clk_pllv3_ops = { .prepare = clk_pllv3_prepare, .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_recalc_rate, .round_rate = clk_pllv3_round_rate, .set_rate = clk_pllv3_set_rate, @@ -225,8 +194,6 @@ static const struct clk_ops clk_pllv3_sys_ops = { .prepare = clk_pllv3_prepare, .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_sys_recalc_rate, .round_rate = clk_pllv3_sys_round_rate, .set_rate = clk_pllv3_sys_set_rate, @@ -299,8 +266,6 @@ static const struct clk_ops clk_pllv3_av_ops = { .prepare = clk_pllv3_prepare, .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_av_recalc_rate, .round_rate = clk_pllv3_av_round_rate, .set_rate = clk_pllv3_av_set_rate, @@ -315,8 +280,6 @@ static const struct clk_ops clk_pllv3_enet_ops = { .prepare = clk_pllv3_prepare, .unprepare = clk_pllv3_unprepare, - .enable = clk_pllv3_enable, - .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_enet_recalc_rate, };
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index f60d6d5..a178184 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c
@@ -58,6 +58,8 @@ #define PFD_PLL1_BASE (anatop_base + 0x2b0) #define PFD_PLL2_BASE (anatop_base + 0x100) #define PFD_PLL3_BASE (anatop_base + 0xf0) +#define PLL3_CTRL (anatop_base + 0x10) +#define PLL7_CTRL (anatop_base + 0x20) static void __iomem *anatop_base; static void __iomem *ccm_base; @@ -98,9 +100,15 @@ static struct clk *clk[VF610_CLK_END]; static struct clk_onecell_data clk_data; +static unsigned int const clks_init_on[] __initconst = { + VF610_CLK_SYS_BUS, + VF610_CLK_DDR_SEL, +}; + static void __init vf610_clocks_init(struct device_node *ccm_node) { struct device_node *np; + int i; clk[VF610_CLK_DUMMY] = imx_clk_fixed("dummy", 0); clk[VF610_CLK_SIRC_128K] = imx_clk_fixed("sirc_128k", 128000); @@ -148,6 +156,9 @@ clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6); /* pll6: default 960Mhz */ clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1); + /* pll7: USB1 PLL at 480MHz */ + clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2); + clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5); clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5); clk[VF610_CLK_SYS_SEL] = imx_clk_mux("sys_sel", CCM_CCSR, 0, 3, sys_sels, ARRAY_SIZE(sys_sels)); @@ -160,8 +171,11 @@ clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock); clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1); - clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "pll3_main", CCM_CCGR1, CCM_CCGRx_CGn(4)); - clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "pll3_main", CCM_CCGR7, CCM_CCGRx_CGn(4)); + clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6); + clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6); + + clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4)); + clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4)); clk[VF610_CLK_QSPI0_SEL] = imx_clk_mux("qspi0_sel", CCM_CSCMR1, 22, 2, qspi_sels, 4); clk[VF610_CLK_QSPI0_EN] = imx_clk_gate("qspi0_en", "qspi0_sel", CCM_CSCDR3, 4); @@ -322,6 +336,9 @@ clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_AUDIO_EXT]); clk_set_parent(clk[VF610_CLK_SAI3_SEL], clk[VF610_CLK_AUDIO_EXT]); + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clk[clks_init_on[i]]); + /* Add the clocks to provider list */ clk_data.clks = clk; clk_data.clk_num = ARRAY_SIZE(clk);
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index d5ba76f..4cdf8b6 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h
@@ -36,6 +36,9 @@ struct clk * imx_obtain_fixed_clock( const char *name, unsigned long rate); +struct clk *imx_clk_gate_exclusive(const char *name, const char *parent, + void __iomem *reg, u8 shift, u32 exclusive_mask); + static inline struct clk *imx_clk_gate2(const char *name, const char *parent, void __iomem *reg, u8 shift) {
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 22ba897..1dabf43 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h
@@ -98,11 +98,9 @@ void v7_secondary_startup(void); void imx_scu_map_io(void); void imx_smp_prepare(void); -void imx_scu_standby_enable(void); #else static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} -static inline void imx_scu_standby_enable(void) {} #endif void imx_src_init(void); void imx_gpc_init(void);
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 10844d3..aa93578 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -66,10 +66,6 @@ int __init imx6q_cpuidle_init(void) { - /* Need to enable SCU standby for entering WAIT modes */ - if (!cpu_is_imx6sx()) - imx_scu_standby_enable(); - /* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */ imx6q_set_int_mem_clk_lpm(true);
diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h index a21d331..bb2c90d 100644 --- a/arch/arm/mach-imx/eukrea-baseboards.h +++ b/arch/arm/mach-imx/eukrea-baseboards.h
@@ -27,23 +27,15 @@ * This CPU module needs a baseboard to work. After basic initializing * its own devices, it calls baseboard's init function. * TODO: Add your own baseboard init function and call it from - * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init() - * eukrea_cpuimx35_init() eukrea_cpuimx51_init() - * or eukrea_cpuimx51sd_init(). + * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init() * * This example here is for the development board. Refer * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25 - * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27 * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35 - * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51 - * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd */ extern void eukrea_mbimxsd25_baseboard_init(void); -extern void eukrea_mbimx27_baseboard_init(void); extern void eukrea_mbimxsd35_baseboard_init(void); -extern void eukrea_mbimx51_baseboard_init(void); -extern void eukrea_mbimxsd51_baseboard_init(void); #endif
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c deleted file mode 100644 index b2f08bf..0000000 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ /dev/null
@@ -1,351 +0,0 @@ -/* - * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/backlight.h> -#include <video/platform_lcd.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -static const int eukrea_mbimx27_pins[] __initconst = { - /* UART2 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART3 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* UART4 */ -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, -#endif - /* SDHC1*/ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - /* display */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* SPI1 */ - PD29_PF_CSPI1_SCLK, - PD30_PF_CSPI1_MISO, - PD31_PF_CSPI1_MOSI, - /* SSI4 */ -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ - || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) - PC16_PF_SSI4_FS, - PC17_PF_SSI4_RXD | GPIO_PUEN, - PC18_PF_SSI4_TXD | GPIO_PUEN, - PC19_PF_SSI4_CLK, -#endif -}; - -static const uint32_t eukrea_mbimx27_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), -}; - -static const struct matrix_keymap_data -eukrea_mbimx27_keymap_data __initconst = { - .keymap = eukrea_mbimx27_keymap, - .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap), -}; - -static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_PORTF | 16, - }, - { - .name = "led2", - .default_trigger = "none", - .active_low = 1, - .gpio = GPIO_PORTF | 19, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimx27_gpio_led_info __initconst = { - .leds = eukrea_mbimx27_gpio_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds), -}; - -static struct imx_fb_videomode eukrea_mbimx27_modes[] = { - { - .mode = { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = 156000, - .hsync_len = 30, - .left_margin = 38, - .right_margin = 20, - .vsync_len = 3, - .upper_margin = 15, - .lower_margin = 4, - }, - .pcr = 0xFAD08B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .hsync_len = 1, - .left_margin = 35, - .right_margin = 0, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 0, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .hsync_len = 1, - .left_margin = 35, - .right_margin = 0, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 0, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, -}; - -static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = { - .mode = eukrea_mbimx27_modes, - .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes), - - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00040060, -}; - -static void eukrea_mbimx27_bl_set_intensity(int intensity) -{ - if (intensity) - gpio_direction_output(GPIO_PORTE | 5, 1); - else - gpio_direction_output(GPIO_PORTE | 5, 0); -} - -static struct generic_bl_info eukrea_mbimx27_bl_info = { - .name = "eukrea_mbimx27-bl", - .max_intensity = 0xff, - .default_intensity = 0xff, - .set_bl_intensity = eukrea_mbimx27_bl_set_intensity, -}; - -static struct platform_device eukrea_mbimx27_bl_dev = { - .name = "generic-bl", - .id = 1, - .dev = { - .platform_data = &eukrea_mbimx27_bl_info, - }, -}; - -static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_PORTA | 25, 1); - else - gpio_direction_output(GPIO_PORTA | 25, 0); -} - -static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = { - .set_power = eukrea_mbimx27_lcd_power_set, -}; - -static struct platform_device eukrea_mbimx27_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimx27_lcd_power_data, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -#define ADS7846_PENDOWN (GPIO_PORTD | 25) - -static void __maybe_unused ads7846_dev_init(void) -{ - if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - return; - } - gpio_direction_input(ADS7846_PENDOWN); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ADS7846_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct spi_board_info __maybe_unused - eukrea_mbimx27_spi_board_info[] __initdata = { - [0] = { - .modalias = "ads7846", - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 1500000, - /* irq number is run-time assigned */ - .platform_data = &ads7846_config, - .mode = SPI_MODE_2, - }, -}; - -static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28}; - -static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = { - .chipselect = eukrea_mbimx27_spi_cs, - .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs), -}; - -static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { - .dat3_card_detect = 1, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = { - .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE, -}; - -/* - * system init for baseboard usage. Will be called by cpuimx27 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimx27_baseboard_init(void) -{ - mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, - ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); - - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); -#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - imx27_add_imx_uart3(&uart_pdata); -#endif - - imx27_add_imx_fb(&eukrea_mbimx27_fb_data); - imx27_add_mxc_mmc(0, &sdhc_pdata); - - i2c_register_board_info(0, eukrea_mbimx27_i2c_devices, - ARRAY_SIZE(eukrea_mbimx27_i2c_devices)); - - imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata); - -#if defined(CONFIG_TOUCHSCREEN_ADS7846) \ - || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - /* ADS7846 Touchscreen controller init */ - mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN); - ads7846_dev_init(); -#endif - - /* SPI_CS0 init */ - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); - eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25)); - spi_register_board_info(eukrea_mbimx27_spi_board_info, - ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); - - /* Leds configuration */ - mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT); - /* Backlight */ - mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT); - gpio_request(GPIO_PORTE | 5, "backlight"); - platform_device_register(&eukrea_mbimx27_bl_dev); - /* LCD Reset */ - mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT); - gpio_request(GPIO_PORTA | 25, "lcd_enable"); - platform_device_register(&eukrea_mbimx27_lcd_powerdev); - - imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); - - gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -}
diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/imx1-dt.c new file mode 100644 index 0000000..6f915b0 --- /dev/null +++ b/arch/arm/mach-imx/imx1-dt.c
@@ -0,0 +1,26 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of_platform.h> +#include <asm/mach/arch.h> + +#include "common.h" + +static const char * const imx1_dt_board_compat[] __initconst = { + "fsl,imx1", + NULL +}; + +DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") + .map_io = mx1_map_io, + .init_early = imx1_init_early, + .init_irq = mx1_init_irq, + .dt_compat = imx1_dt_board_compat, + .restart = mxc_restart, +MACHINE_END
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 080e66c..dc8f1a6 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c
@@ -20,7 +20,7 @@ static void __init imx27_dt_init(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; mxc_arch_reset_init_dt();
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 7c66805..1657fe6 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -64,7 +64,6 @@ return ret; } -EXPORT_SYMBOL(mxc_iomux_mode); /* * This function configures the pad value for a IOMUX pin. @@ -90,7 +89,6 @@ spin_unlock(&gpio_mux_lock); } -EXPORT_SYMBOL(mxc_iomux_set_pad); /* * allocs a single pin: @@ -116,7 +114,6 @@ return 0; } -EXPORT_SYMBOL(mxc_iomux_alloc_pin); int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, const char *label) @@ -137,7 +134,6 @@ mxc_iomux_release_multiple_pins(pin_list, i); return ret; } -EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); void mxc_iomux_release_pin(unsigned int pin) { @@ -146,7 +142,6 @@ if (pad < (PIN_MAX + 1)) clear_bit(pad, mxc_pin_alloc_map); } -EXPORT_SYMBOL(mxc_iomux_release_pin); void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) { @@ -158,7 +153,6 @@ p++; } } -EXPORT_SYMBOL(mxc_iomux_release_multiple_pins); /* * This function enables/disables the general purpose function for a particular @@ -178,4 +172,3 @@ __raw_writel(l, IOMUXGPR); spin_unlock(&gpio_mux_lock); } -EXPORT_SYMBOL(mxc_iomux_set_gpr);
diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c index 2b156d1..ecd5436 100644 --- a/arch/arm/mach-imx/iomux-v1.c +++ b/arch/arm/mach-imx/iomux-v1.c
@@ -153,7 +153,6 @@ return 0; } -EXPORT_SYMBOL(mxc_gpio_mode); static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) { @@ -178,7 +177,6 @@ ret = imx_iomuxv1_setup_multiple(pin_list, count); return ret; } -EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); int __init imx_iomuxv1_init(void __iomem *base, int numports) {
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index 9dae74b..d61f960 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c
@@ -55,7 +55,6 @@ return 0; } -EXPORT_SYMBOL(mxc_iomux_v3_setup_pad); int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) { @@ -71,7 +70,6 @@ } return 0; } -EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads); void mxc_iomux_v3_init(void __iomem *iomux_v3_base) {
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index a7e9bd2..f206052 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -537,7 +537,7 @@ gpio_free(ARMADILLO5X0_RTC_GPIO); } if (armadillo5x0_i2c_rtc.irq == 0) - pr_warning("armadillo5x0_init: failed to get RTC IRQ\n"); + pr_warn("armadillo5x0_init: failed to get RTC IRQ\n"); i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); /* USB */
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c deleted file mode 100644 index e6d4b99..0000000 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ /dev/null
@@ -1,321 +0,0 @@ -/* - * Copyright (C) 2009 Eric Benard - eric@eukrea.com - * - * Based on pcm038.c which is : - * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx27.h" -#include "ulpi.h" - -static const int eukrea_cpuimx27_pins[] __initconst = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART4 */ -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, -#endif - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C1 */ - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - /* SDHC2 */ -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, -#endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) - /* Quad UART's IRQ */ - GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN, - GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN, -#endif - /* OTG */ - PC7_PF_USBOTG_DATA5, - PC8_PF_USBOTG_DATA6, - PC9_PF_USBOTG_DATA0, - PC10_PF_USBOTG_DATA2, - PC11_PF_USBOTG_DATA1, - PC12_PF_USBOTG_DATA4, - PC13_PF_USBOTG_DATA3, - PE0_PF_USBOTG_NXT, - PE1_PF_USBOTG_STP, - PE2_PF_USBOTG_DIR, - PE24_PF_USBOTG_CLK, - PE25_PF_USBOTG_DATA7, - /* USBH2 */ - PA0_PF_USBH2_CLK, - PA1_PF_USBH2_DIR, - PA2_PF_USBH2_DATA7, - PA3_PF_USBH2_NXT, - PA4_PF_USBH2_STP, - PD19_AF_USBH2_DATA4, - PD20_AF_USBH2_DATA3, - PD21_AF_USBH2_DATA6, - PD22_AF_USBH2_DATA0, - PD23_AF_USBH2_DATA2, - PD24_AF_USBH2_DATA1, - PD26_AF_USBH2_DATA5, -}; - -static struct physmap_flash_data eukrea_cpuimx27_flash_data = { - .width = 2, -}; - -static struct resource eukrea_cpuimx27_flash_resource = { - .start = 0xc0000000, - .end = 0xc3ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device eukrea_cpuimx27_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &eukrea_cpuimx27_flash_data, - }, - .num_resources = 1, - .resource = &eukrea_cpuimx27_flash_resource, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct mxc_nand_platform_data -cpuimx27_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_cpuimx27_nor_mtd_device, -}; - -static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), - /* irq number is run-time assigned */ - .uartclk = 14745600, - .regshift = 1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - } -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_platform_data, - }, -}; -#endif - -static int eukrea_cpuimx27_otg_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = eukrea_cpuimx27_otg_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = eukrea_cpuimx27_usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx27_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx27_otg_mode); - -static void __init eukrea_cpuimx27_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, - ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); - - imx27_add_imx_uart0(&uart_pdata); - - imx27_add_mxc_nand(&cpuimx27_nand_board_info); - - i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - - imx27_add_imx_i2c(0, &cpuimx27_i2c1_data); - - imx27_add_fec(NULL); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); - -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) - /* SDHC2 can be used for Wifi */ - imx27_add_mxc_mmc(1, NULL); -#endif -#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) - /* in which case UART4 is also used for Bluetooth */ - imx27_add_imx_uart3(&uart_pdata); -#endif - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) - serial_platform_data[0].irq = IMX_GPIO_NR(2, 23); - serial_platform_data[1].irq = IMX_GPIO_NR(2, 22); - serial_platform_data[2].irq = IMX_GPIO_NR(2, 27); - serial_platform_data[3].irq = IMX_GPIO_NR(2, 30); - platform_device_register(&serial_device); -#endif - - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (otg_pdata.otg) - imx27_add_mxc_ehci_otg(&otg_pdata); - } else { - imx27_add_fsl_usb2_udc(&otg_device_pdata); - } - - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbh2_pdata.otg) - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD - eukrea_mbimx27_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx27_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = eukrea_cpuimx27_timer_init, - .init_machine = eukrea_cpuimx27_init, - .restart = mxc_restart, -MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index c77deb3..2c5fcaf 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c
@@ -51,7 +51,7 @@ static void __init imx51_dt_init(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; mxc_arch_reset_init_dt(); imx51_ipu_mipi_setup();
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 673a734..3de3b73 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -42,6 +42,9 @@ static void __init imx6sx_init_late(void) { imx6q_cpuidle_init(); + + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) + platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); } static const char * const imx6sx_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c deleted file mode 100644 index 77fda3d..0000000 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ /dev/null
@@ -1,154 +0,0 @@ -/* - * arch/arm/mach-imx/mach-mx1ads.c - * - * Initially based on: - * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c - * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de> - * - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/i2c.h> -#include <linux/i2c/pcf857x.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -static const int mx1ads_pins[] __initconst = { - /* UART1 */ - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, - /* UART2 */ - PB28_PF_UART2_CTS, - PB29_PF_UART2_RTS, - PB30_PF_UART2_TXD, - PB31_PF_UART2_RXD, - /* I2C */ - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, - /* SPI */ - PC13_PF_SPI1_SPI_RDY, - PC14_PF_SPI1_SCLK, - PC15_PF_SPI1_SS, - PC16_PF_SPI1_MISO, - PC17_PF_SPI1_MOSI, -}; - -/* - * UARTs platform data - */ - -static const struct imxuart_platform_data uart0_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxuart_platform_data uart1_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* - * Physmap flash - */ - -static const struct physmap_flash_data mx1ads_flash_data __initconst = { - .width = 4, /* bankwidth in bytes */ -}; - -static const struct resource flash_resource __initconst = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -/* - * I2C - */ -static struct pcf857x_platform_data pcf857x_data[] = { - { - .gpio_base = 4 * 32, - }, { - .gpio_base = 4 * 32 + 16, - } -}; - -static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info mx1ads_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8575", 0x22), - .platform_data = &pcf857x_data[0], - }, { - I2C_BOARD_INFO("pcf8575", 0x24), - .platform_data = &pcf857x_data[1], - }, -}; - -/* - * Board init - */ -static void __init mx1ads_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(mx1ads_pins, - ARRAY_SIZE(mx1ads_pins), "mx1ads"); - - /* UART */ - imx1_add_imx_uart0(&uart0_pdata); - imx1_add_imx_uart1(&uart1_pdata); - - /* Physmap flash */ - platform_device_register_resndata(NULL, "physmap-flash", 0, - &flash_resource, 1, - &mx1ads_flash_data, sizeof(mx1ads_flash_data)); - - /* I2C */ - i2c_register_board_info(0, mx1ads_i2c_devices, - ARRAY_SIZE(mx1ads_i2c_devices)); - - imx1_add_imx_i2c(&mx1ads_i2c_data); -} - -static void __init mx1ads_timer_init(void) -{ - mx1_clocks_init(32000); -} - -MACHINE_START(MX1ADS, "Freescale MX1ADS") - /* Maintainer: Sascha Hauer, Pengutronix */ - .atag_offset = 0x100, - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = mx1ads_timer_init, - .init_machine = mx1ads_init, - .restart = mxc_restart, -MACHINE_END - -MACHINE_START(MXLADS, "Freescale MXLADS") - .atag_offset = 0x100, - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = mx1ads_timer_init, - .init_machine = mx1ads_init, - .restart = mxc_restart, -MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 453f41a..65a0dc0 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -307,7 +307,7 @@ ret = gpio_request_array(mx31_3ds_sdhc1_gpios, ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); if (ret) { - pr_warning("Unable to request the SD/MMC GPIOs.\n"); + pr_warn("Unable to request the SD/MMC GPIOs.\n"); return ret; } @@ -316,7 +316,7 @@ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-detect", data); if (ret) { - pr_warning("Unable to request the SD/MMC card-detect IRQ.\n"); + pr_warn("Unable to request the SD/MMC card-detect IRQ.\n"); goto gpio_free; }
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 57eac6f..4822a17 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -270,7 +270,7 @@ /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); if (ret) - pr_warning("could not get LAN irq gpio\n"); + pr_warn("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); smsc911x_resources[1].start =
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c deleted file mode 100644 index 0b5d1ca..0000000 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ /dev/null
@@ -1,273 +0,0 @@ -/* - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/i2c.h> -#include <linux/irq.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <linux/gpio.h> -#include <linux/platform_data/pca953x.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -static const int mxt_td60_pins[] __initconst = { - /* UART0 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART1 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART2 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C1 */ - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - /* I2C2 */ - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL, - /* FB */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA25_PF_CLS, - PA27_PF_SPL_SPR, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* OWIRE */ - PE16_AF_OWIRE, - /* SDHC1*/ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - PF8_AF_ATA_IORDY, - /* SDHC2*/ - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, -}; - -static const struct mxc_nand_platform_data -mxt_td60_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = { - .bitrate = 100000, -}; - -/* PCA9557 */ -static int mxt_td60_pca9557_setup(struct i2c_client *client, - unsigned gpio_base, unsigned ngpio, - void *context) -{ - static int mxt_td60_gpio_value[] = { - -1, -1, -1, -1, -1, -1, -1, 1 - }; - int n; - - for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) { - gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp"); - if (mxt_td60_gpio_value[n] < 0) - gpio_direction_input(gpio_base + n); - else - gpio_direction_output(gpio_base + n, - mxt_td60_gpio_value[n]); - gpio_export(gpio_base + n, 0); - } - - return 0; -} - -static struct pca953x_platform_data mxt_td60_pca9557_pdata = { - .gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */ - .invert = 0, /* Do not invert */ - .setup = mxt_td60_pca9557_setup, -}; - -static struct i2c_board_info mxt_td60_i2c_devices[] = { - { - I2C_BOARD_INFO("pca9557", 0x18), - .platform_data = &mxt_td60_pca9557_pdata, - }, -}; - -static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info mxt_td60_i2c2_devices[] = { -}; - -static struct imx_fb_videomode mxt_td60_modes[] = { - { - .mode = { - .name = "Chimei LW700AT9003", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30303, - .hsync_len = 64, - .left_margin = 0x67, - .right_margin = 0x68, - .vsync_len = 16, - .upper_margin = 0x0f, - .lower_margin = 0x0f, - }, - .bpp = 16, - .pcr = 0xFA208B83, - }, -}; - -static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = { - .mode = mxt_td60_modes, - .num_modes = ARRAY_SIZE(mxt_td60_modes), - - /* - * - HSYNC active high - * - VSYNC active high - * - clk notenabled while idle - * - clock inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq, - IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data); -} - -static void mxt_td60_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data); -} - -static const struct imxmmc_platform_data sdhc1_pdata __initconst = { - .init = mxt_td60_sdhc1_init, - .exit = mxt_td60_sdhc1_exit, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static void __init mxt_td60_board_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), - "MXT_TD60"); - - imx27_add_imx_uart0(&uart_pdata); - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); - imx27_add_mxc_nand(&mxt_td60_nand_board_info); - - i2c_register_board_info(0, mxt_td60_i2c_devices, - ARRAY_SIZE(mxt_td60_i2c_devices)); - - i2c_register_board_info(1, mxt_td60_i2c2_devices, - ARRAY_SIZE(mxt_td60_i2c2_devices)); - - imx27_add_imx_i2c(0, &mxt_td60_i2c0_data); - imx27_add_imx_i2c(1, &mxt_td60_i2c1_data); - imx27_add_imx_fb(&mxt_td60_fb_data); - imx27_add_mxc_mmc(0, &sdhc1_pdata); - imx27_add_fec(NULL); -} - -static void __init mxt_td60_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") - /* maintainer: Maxtrack Industrial */ - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = mxt_td60_timer_init, - .init_machine = mxt_td60_board_init, - .restart = mxc_restart, -MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 8eb1570..6d87941 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -58,7 +58,7 @@ if (!strcmp("eet", str)) pcm037_instance = PCM037_EET; else if (strcmp("pcm970", str)) - pr_warning("Unknown pcm037 baseboard variant %s\n", str); + pr_warn("Unknown pcm037 baseboard variant %s\n", str); return 1; } @@ -624,7 +624,7 @@ /* LAN9217 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); if (ret) - pr_warning("could not get LAN irq gpio\n"); + pr_warn("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); smsc911x_resources[1].start =
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c deleted file mode 100644 index ee862ad..0000000 --- a/arch/arm/mach-imx/mach-pcm038.c +++ /dev/null
@@ -1,358 +0,0 @@ -/* - * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/i2c.h> -#include <linux/platform_data/at24.h> -#include <linux/io.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/regulator/machine.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/irq.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "board-pcm038.h" -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx27.h" -#include "ulpi.h" - -static const int pcm038_pins[] __initconst = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART2 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART3 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C2 */ - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL, - /* SPI1 */ - PD25_PF_CSPI1_RDY, - PD29_PF_CSPI1_SCLK, - PD30_PF_CSPI1_MISO, - PD31_PF_CSPI1_MOSI, - /* SSI1 */ - PC20_PF_SSI1_FS, - PC21_PF_SSI1_RXD, - PC22_PF_SSI1_TXD, - PC23_PF_SSI1_CLK, - /* SSI4 */ - PC16_PF_SSI4_FS, - PC17_PF_SSI4_RXD, - PC18_PF_SSI4_TXD, - PC19_PF_SSI4_CLK, - /* USB host */ - PA0_PF_USBH2_CLK, - PA1_PF_USBH2_DIR, - PA2_PF_USBH2_DATA7, - PA3_PF_USBH2_NXT, - PA4_PF_USBH2_STP, - PD19_AF_USBH2_DATA4, - PD20_AF_USBH2_DATA3, - PD21_AF_USBH2_DATA6, - PD22_AF_USBH2_DATA0, - PD23_AF_USBH2_DATA2, - PD24_AF_USBH2_DATA1, - PD26_AF_USBH2_DATA5, -}; - -/* - * Phytec's PCM038 comes with 2MiB battery buffered SRAM, - * 16 bit width - */ - -static struct platdata_mtd_ram pcm038_sram_data = { - .bankwidth = 2, -}; - -static struct resource pcm038_sram_resource = { - .start = MX27_CS1_BASE_ADDR, - .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm038_sram_mtd_device = { - .name = "mtd-ram", - .id = 0, - .dev = { - .platform_data = &pcm038_sram_data, - }, - .num_resources = 1, - .resource = &pcm038_sram_resource, -}; - -/* - * Phytec's phyCORE-i.MX27 comes with 32MiB flash, - * 16 bit width - */ -static struct physmap_flash_data pcm038_flash_data = { - .width = 2, -}; - -static struct resource pcm038_flash_resource = { - .start = 0xc0000000, - .end = 0xc1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm038_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm038_flash_data, - }, - .num_resources = 1, - .resource = &pcm038_flash_resource, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct mxc_nand_platform_data -pcm038_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct platform_device *platform_devices[] __initdata = { - &pcm038_nor_mtd_device, - &pcm038_sram_mtd_device, -}; - -/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and - * setup other stuffs to access the sram. */ -static void __init pcm038_init_sram(void) -{ - __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1))); - __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1))); - __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1))); -} - -static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct at24_platform_data board_eeprom = { - .byte_len = 4096, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info pcm038_i2c_devices[] = { - { - I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ - .platform_data = &board_eeprom, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("lm75", 0x4a), - } -}; - -static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; - -static const struct spi_imx_master pcm038_spi0_data __initconst = { - .chipselect = pcm038_spi_cs, - .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), -}; - -static struct regulator_consumer_supply sdhc1_consumers[] = { - { - .dev_name = "imx21-mmc.1", - .supply = "sdhc_vcc", - }, -}; - -static struct regulator_init_data sdhc1_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 0, - }, - .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers), - .consumer_supplies = sdhc1_consumers, -}; - -static struct regulator_consumer_supply cam_consumers[] = { - { - .dev_name = NULL, - .supply = "imx_cam_vcc", - }, -}; - -static struct regulator_init_data cam_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 0, - }, - .num_consumer_supplies = ARRAY_SIZE(cam_consumers), - .consumer_supplies = cam_consumers, -}; - -static struct mc13xxx_regulator_init_data pcm038_regulators[] = { - { - .id = MC13783_REG_VCAM, - .init_data = &cam_data, - }, { - .id = MC13783_REG_VMMC1, - .init_data = &sdhc1_data, - }, -}; - -static struct mc13xxx_platform_data pcm038_pmic = { - .regulators = { - .regulators = pcm038_regulators, - .num_regulators = ARRAY_SIZE(pcm038_regulators), - }, - .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, -}; - -static struct spi_board_info pcm038_spi_board_info[] __initdata = { - { - .modalias = "mc13783", - /* irq number is run-time assigned */ - .max_speed_hz = 300000, - .bus_num = 0, - .chip_select = 0, - .platform_data = &pcm038_pmic, - .mode = SPI_CS_HIGH, - } -}; - -static int pcm038_usbh2_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { - .init = pcm038_usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static void __init pcm038_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), - "PCM038"); - - pcm038_init_sram(); - - imx27_add_imx_uart0(&uart_pdata); - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); - - mxc_gpio_mode(PE16_AF_OWIRE); - imx27_add_mxc_nand(&pcm038_nand_board_info); - - /* only the i2c master 1 is used on this CPU card */ - i2c_register_board_info(1, pcm038_i2c_devices, - ARRAY_SIZE(pcm038_i2c_devices)); - - imx27_add_imx_i2c(1, &pcm038_i2c1_data); - - /* PE18 for user-LED D40 */ - mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); - - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - - /* MC13783 IRQ */ - mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); - - imx27_add_spi_imx0(&pcm038_spi0_data); - pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23)); - spi_register_board_info(pcm038_spi_board_info, - ARRAY_SIZE(pcm038_spi_board_info)); - - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); - - imx27_add_fec(NULL); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); - -#ifdef CONFIG_MACH_PCM970_BASEBOARD - pcm970_baseboard_init(); -#endif -} - -static void __init pcm038_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(PCM038, "phyCORE-i.MX27") - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = pcm038_timer_init, - .init_machine = pcm038_init, - .restart = mxc_restart, -MACHINE_END
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index a39b69e..17a41ca 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h
@@ -43,6 +43,8 @@ #define IMX_CHIP_REVISION_1_1 0x11 #define IMX_CHIP_REVISION_1_2 0x12 #define IMX_CHIP_REVISION_1_3 0x13 +#define IMX_CHIP_REVISION_1_4 0x14 +#define IMX_CHIP_REVISION_1_5 0x15 #define IMX_CHIP_REVISION_2_0 0x20 #define IMX_CHIP_REVISION_2_1 0x21 #define IMX_CHIP_REVISION_2_2 0x22
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c deleted file mode 100644 index 51c6082..0000000 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ /dev/null
@@ -1,231 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/can/platform/sja1000.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -static const int pcm970_pins[] __initconst = { - /* SDHC */ - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, - /* display */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA24_PF_REV, - PA25_PF_CLS, - PA26_PF_PS, - PA27_PF_SPL_SPR, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* - * it seems the data line misses a pullup, so we must enable - * the internal pullup as a local workaround - */ - PD17_PF_I2C_DATA | GPIO_PUEN, - PD18_PF_I2C_CLK, - /* Camera */ - PB10_PF_CSI_D0, - PB11_PF_CSI_D1, - PB12_PF_CSI_D2, - PB13_PF_CSI_D3, - PB14_PF_CSI_D4, - PB15_PF_CSI_MCLK, - PB16_PF_CSI_PIXCLK, - PB17_PF_CSI_D5, - PB18_PF_CSI_D6, - PB19_PF_CSI_D7, - PB20_PF_CSI_VSYNC, - PB21_PF_CSI_HSYNC, -}; - -static int pcm970_sdhc2_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PORTC + 28); -} - -static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) -{ - int ret; - - ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, - IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); - if (ret) - return ret; - - ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); - if (ret) { - free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); - return ret; - } - - gpio_direction_input(GPIO_PORTC + 28); - - return 0; -} - -static void pcm970_sdhc2_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); - gpio_free(GPIO_PORTC + 28); -} - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { - .get_ro = pcm970_sdhc2_get_ro, - .init = pcm970_sdhc2_init, - .exit = pcm970_sdhc2_exit, -}; - -static struct imx_fb_videomode pcm970_modes[] = { - { - .mode = { - .name = "Sharp-LQ035Q7", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 188679, /* in ps (5.3MHz) */ - .hsync_len = 7, - .left_margin = 5, - .right_margin = 16, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 9, - }, - /* - * - HSYNC active high - * - VSYNC active high - * - clk notenabled while idle - * - clock not inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pcr = 0xF00080C0, - .bpp = 16, - }, { - .mode = { - .name = "TX090", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 7, - .lower_margin = 40, - .hsync_len = 96, - .vsync_len = 1, - }, - /* - * - HSYNC active low (1 << 22) - * - VSYNC active low (1 << 23) - * - clk notenabled while idle - * - clock not inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19), - .bpp = 32, - }, -}; - -static const struct imx_fb_platform_data pcm038_fb_data __initconst = { - .mode = pcm970_modes, - .num_modes = ARRAY_SIZE(pcm970_modes), - - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static struct resource pcm970_sja1000_resources[] = { - { - .start = MX27_CS4_BASE_ADDR, - .end = MX27_CS4_BASE_ADDR + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct sja1000_platform_data pcm970_sja1000_platform_data = { - .osc_freq = 16000000, - .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, - .cdr = CDR_CBP, -}; - -static struct platform_device pcm970_sja1000 = { - .name = "sja1000_platform", - .dev = { - .platform_data = &pcm970_sja1000_platform_data, - }, - .resource = pcm970_sja1000_resources, - .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), -}; - -/* - * system init for baseboard usage. Will be called by pcm038 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init pcm970_baseboard_init(void) -{ - mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins), - "PCM970"); - - imx27_add_imx_fb(&pcm038_fb_data); - mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); - imx27_add_mxc_mmc(1, &sdhc_pdata); - pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19)); - pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19)); - platform_device_register(&pcm970_sja1000); -}
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 5b57c17..771bd25 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c
@@ -20,8 +20,6 @@ #include "common.h" #include "hardware.h" -#define SCU_STANDBY_ENABLE (1 << 5) - u32 g_diag_reg; static void __iomem *scu_base; @@ -45,14 +43,6 @@ scu_base = IMX_IO_ADDRESS(base); } -void imx_scu_standby_enable(void) -{ - u32 val = readl_relaxed(scu_base); - - val |= SCU_STANDBY_ENABLE; - writel_relaxed(val, scu_base); -} - static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup);
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index bf92e5a..15d18e1 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c
@@ -60,17 +60,22 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35, MX25, MX5 */ +/* MX31, MX35, MX25, MX5, MX6 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) #define V2_TCTL_CLK_PER (2 << 6) +#define V2_TCTL_CLK_OSC_DIV8 (5 << 6) #define V2_TCTL_FRR (1 << 9) +#define V2_TCTL_24MEN (1 << 10) +#define V2_TPRER_PRE24M 12 #define V2_IR 0x0c #define V2_TSTAT 0x08 #define V2_TSTAT_OF1 (1 << 0) #define V2_TCN 0x24 #define V2_TCMP 0x10 +#define V2_TIMER_RATE_OSC_DIV8 3000000 + #define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) #define timer_is_v2() (!timer_is_v1()) @@ -312,10 +317,22 @@ __raw_writel(0, timer_base + MXC_TCTL); __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ - if (timer_is_v2()) - tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; - else + if (timer_is_v2()) { + tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; + if (clk_get_rate(clk_per) == V2_TIMER_RATE_OSC_DIV8) { + tctl_val |= V2_TCTL_CLK_OSC_DIV8; + if (cpu_is_imx6dl() || cpu_is_imx6sx()) { + /* 24 / 8 = 3 MHz */ + __raw_writel(7 << V2_TPRER_PRE24M, + timer_base + MXC_TPRER); + tctl_val |= V2_TCTL_24MEN; + } + } else { + tctl_val |= V2_TCTL_CLK_PER; + } + } else { tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; + } __raw_writel(tctl_val, timer_base + MXC_TCTL); @@ -349,9 +366,13 @@ WARN_ON(!timer_base); irq = irq_of_parse_and_map(np, 0); - clk_per = of_clk_get_by_name(np, "per"); clk_ipg = of_clk_get_by_name(np, "ipg"); + /* Try osc_per first, and fall back to per otherwise */ + clk_per = of_clk_get_by_name(np, "osc_per"); + if (IS_ERR(clk_per)) + clk_per = of_clk_get_by_name(np, "per"); + _mxc_timer_init(irq, clk_per, clk_ipg); } CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt);
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 1d4f384..4de65ee 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c
@@ -141,8 +141,7 @@ while (stat) { handled = 1; irqofs = fls(stat) - 1; - handle_IRQ(irq_find_mapping(domain, - irqofs + i * 32), regs); + handle_domain_irq(domain, irqofs + i * 32, regs); stat &= ~(1 << irqofs); } }
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 3ce8807..38b0da3 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c
@@ -20,10 +20,13 @@ #include <linux/mm.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> +#include <linux/amba/mmci.h> +#include <linux/amba/pl061.h> #include <linux/io.h> #include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> #include <linux/irqchip/arm-vic.h> +#include <linux/gpio/machine.h> #include <asm/sizes.h> #include "lm.h" @@ -52,6 +55,13 @@ EXPORT_SYMBOL(impd1_tweak_control); /* + * MMC support + */ +static struct mmci_platform_data mmc_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, +}; + +/* * CLCD support */ #define PANEL PROSPECTOR @@ -291,6 +301,7 @@ .offset = 0x00700000, .irq = { 7, 8 }, .id = 0x00041181, + .platform_data = &mmc_data, }, { .offset = 0x00800000, .irq = { 9 }, @@ -372,6 +383,43 @@ pc_base = dev->resource.start + idev->offset; snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); + + /* Add GPIO descriptor lookup table for the PL061 block */ + if (idev->offset == 0x00400000) { + struct gpiod_lookup_table *lookup; + char *chipname; + char *mmciname; + + lookup = devm_kzalloc(&dev->dev, + sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup), + GFP_KERNEL); + chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL); + mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id); + lookup->dev_id = mmciname; + /* + * Offsets on GPIO block 1: + * 3 = MMC WP (write protect) + * 4 = MMC CD (card detect) + * + * Offsets on GPIO block 2: + * 0 = Up key + * 1 = Down key + * 2 = Left key + * 3 = Right key + * 4 = Key lower left + * 5 = Key lower right + */ + /* We need the two MMCI GPIO entries */ + lookup->table[0].chip_label = chipname; + lookup->table[0].chip_hwnum = 3; + lookup->table[0].con_id = "wp"; + lookup->table[1].chip_label = chipname; + lookup->table[1].chip_hwnum = 4; + lookup->table[1].con_id = "cd"; + lookup->table[1].flags = GPIO_ACTIVE_LOW; + gpiod_add_lookup_table(lookup); + } + d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, irq1, irq2, idev->platform_data, idev->id,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 05e1f73..c186a17 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c
@@ -660,6 +660,7 @@ { unsigned long flags; unsigned int temp; + phys_addr_t io_address = pci_pio_to_address(io_mem.start); pcibios_min_mem = 0x00100000; @@ -701,7 +702,7 @@ /* * Setup window 2 - PCI IO */ - v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) | + v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) | V3_LB_BASE_ENABLE); v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0)); @@ -742,6 +743,7 @@ static void __init pci_v3_postinit(void) { unsigned int pci_cmd; + phys_addr_t io_address = pci_pio_to_address(io_mem.start); pci_cmd = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; @@ -758,7 +760,7 @@ "interrupt: %d\n", ret); #endif - register_isa_ports(non_mem.start, io_mem.start, 0); + register_isa_ports(non_mem.start, io_address, 0); } /* @@ -867,33 +869,32 @@ for_each_of_pci_range(&parser, &range) { if (!range.flags) { - of_pci_range_to_resource(&range, np, &conf_mem); + ret = of_pci_range_to_resource(&range, np, &conf_mem); conf_mem.name = "PCIv3 config"; } if (range.flags & IORESOURCE_IO) { - of_pci_range_to_resource(&range, np, &io_mem); + ret = of_pci_range_to_resource(&range, np, &io_mem); io_mem.name = "PCIv3 I/O"; } if ((range.flags & IORESOURCE_MEM) && !(range.flags & IORESOURCE_PREFETCH)) { non_mem_pci = range.pci_addr; non_mem_pci_sz = range.size; - of_pci_range_to_resource(&range, np, &non_mem); + ret = of_pci_range_to_resource(&range, np, &non_mem); non_mem.name = "PCIv3 non-prefetched mem"; } if ((range.flags & IORESOURCE_MEM) && (range.flags & IORESOURCE_PREFETCH)) { pre_mem_pci = range.pci_addr; pre_mem_pci_sz = range.size; - of_pci_range_to_resource(&range, np, &pre_mem); + ret = of_pci_range_to_resource(&range, np, &pre_mem); pre_mem.name = "PCIv3 prefetched mem"; } - } - if (!conf_mem.start || !io_mem.start || - !non_mem.start || !pre_mem.start) { - dev_err(&pdev->dev, "missing ranges in device node\n"); - return -EINVAL; + if (ret < 0) { + dev_err(&pdev->dev, "missing ranges in device node\n"); + return ret; + } } pci_v3.map_irq = of_irq_parse_and_map_pci;
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile index cad015f..a3d9260 100644 --- a/arch/arm/mach-iop13xx/Makefile +++ b/arch/arm/mach-iop13xx/Makefile
@@ -1,8 +1,3 @@ -obj-y := -obj-m := -obj-n := -obj- := - obj-$(CONFIG_ARCH_IOP13XX) += setup.o obj-$(CONFIG_ARCH_IOP13XX) += irq.o obj-$(CONFIG_ARCH_IOP13XX) += pci.o
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile index cfdf8a1..2d4010a 100644 --- a/arch/arm/mach-iop32x/Makefile +++ b/arch/arm/mach-iop32x/Makefile
@@ -3,9 +3,6 @@ # obj-y := irq.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_MACH_GLANTANK) += glantank.o obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile index 90081d8..e95db30 100644 --- a/arch/arm/mach-iop33x/Makefile +++ b/arch/arm/mach-iop33x/Makefile
@@ -3,9 +3,6 @@ # obj-y := irq.o uart.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_ARCH_IQ80331) += iq80331.o obj-$(CONFIG_MACH_IQ80332) += iq80332.o
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index e370caf..8ecb797 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile
@@ -4,9 +4,6 @@ # obj-y := cpu.o irq.o time.o devices.o -obj-m := -obj-n := -obj- := # PCI support is optional obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index de03620..716e83e 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c
@@ -57,20 +57,6 @@ } /* - * System reset via the watchdog timer - */ -static void lpc32xx_watchdog_reset(void) -{ - /* Make sure WDT clocks are enabled */ - __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN, - LPC32XX_CLKPWR_TIMER_CLK_CTRL); - - /* Instant assert of RESETOUT_N with pulse length 1mS */ - __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18)); - __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC)); -} - -/* * Detects and returns IRAM size for the device variation */ #define LPC32XX_IRAM_BANK_SIZE SZ_128K @@ -210,16 +196,13 @@ void lpc23xx_restart(enum reboot_mode mode, const char *cmd) { - switch (mode) { - case REBOOT_SOFT: - case REBOOT_HARD: - lpc32xx_watchdog_reset(); - break; + /* Make sure WDT clocks are enabled */ + __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN, + LPC32XX_CLKPWR_TIMER_CLK_CTRL); - default: - /* Do nothing */ - break; - } + /* Instant assert of RESETOUT_N with pulse length 1mS */ + __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18)); + __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC)); /* Wait for watchdog to reset system */ while (1)
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig new file mode 100644 index 0000000..2c1154e --- /dev/null +++ b/arch/arm/mach-meson/Kconfig
@@ -0,0 +1,13 @@ +menuconfig ARCH_MESON + bool "Amlogic Meson SoCs" if ARCH_MULTI_V7 + select GENERIC_IRQ_CHIP + select ARM_GIC + +if ARCH_MESON + +config MACH_MESON6 + bool "Amlogic Meson6 (8726MX) SoCs support" + default ARCH_MESON + select MESON6_TIMER + +endif
diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile new file mode 100644 index 0000000..9d7380e --- /dev/null +++ b/arch/arm/mach-meson/Makefile
@@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_MESON) += meson.o
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c new file mode 100644 index 0000000..5ee064f --- /dev/null +++ b/arch/arm/mach-meson/meson.c
@@ -0,0 +1,27 @@ +/* + * Copyright (C) 2014 Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/of_platform.h> +#include <asm/mach/arch.h> + +static const char * const m6_common_board_compat[] = { + "amlogic,meson6", + NULL, +}; + +DT_MACHINE_START(AML8726_MX, "Amlogic Meson6 platform") + .dt_compat = m6_common_board_compat, +MACHINE_END +
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c deleted file mode 100644 index 873c3ca..0000000 --- a/arch/arm/mach-msm/board-mahimahi.c +++ /dev/null
@@ -1,83 +0,0 @@ -/* linux/arch/arm/mach-msm/board-mahimahi.c - * - * Copyright (C) 2009 Google, Inc. - * Copyright (C) 2009 HTC Corporation. - * Author: Dima Zavin <dima@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/memblock.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> - -#include <mach/hardware.h> - -#include "board-mahimahi.h" -#include "devices.h" -#include "proc_comm.h" -#include "common.h" - -static uint debug_uart; - -module_param_named(debug_uart, debug_uart, uint, 0); - -static struct platform_device *devices[] __initdata = { -#if !defined(CONFIG_MSM_SERIAL_DEBUGGER) - &msm_device_uart1, -#endif - &msm_device_uart_dm1, - &msm_device_nand, -}; - -static void __init mahimahi_init(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init mahimahi_fixup(struct tag *tags, char **cmdline) -{ - memblock_add(PHYS_OFFSET, 219*SZ_1M); - memblock_add(MSM_HIGHMEM_BASE, MSM_HIGHMEM_SIZE); -} - -static void __init mahimahi_map_io(void) -{ - msm_map_common_io(); - msm_clock_init(); -} - -static void __init mahimahi_init_late(void) -{ - smd_debugfs_init(); -} - -void msm_timer_init(void); - -MACHINE_START(MAHIMAHI, "mahimahi") - .atag_offset = 0x100, - .fixup = mahimahi_fixup, - .map_io = mahimahi_map_io, - .init_irq = msm_init_irq, - .init_machine = mahimahi_init, - .init_late = mahimahi_init_late, - .init_time = msm_timer_init, -MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 2458843..8f5ecdc 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -124,7 +124,7 @@ static struct platform_device *devices[] __initdata = { &msm_clock_7x30, &msm_device_gpio_7x30, -#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) +#if defined(CONFIG_SERIAL_MSM) &msm_device_uart2, #endif &msm_device_smd,
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c index 2c25050..722ad63 100644 --- a/arch/arm/mach-msm/board-trout-gpio.c +++ b/arch/arm/mach-msm/board-trout-gpio.c
@@ -94,7 +94,7 @@ } static struct msm_gpio_chip msm_gpio_banks[] = { -#if defined(CONFIG_MSM_DEBUG_UART1) +#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9a00000) /* H2W pins <-> UART1 */ TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40), #else
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index f72b07de..ba3edd3 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c
@@ -88,7 +88,7 @@ msm_map_common_io(); iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc)); -#ifdef CONFIG_MSM_DEBUG_UART3 +#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9c00000) /* route UART3 to the "H2W" extended usb connector */ writeb(0x80, TROUT_CPLD_BASE + 0x00); #endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 34e0947..b042dca 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c
@@ -57,8 +57,7 @@ .length = MSM_SHARED_RAM_SIZE, .type = MT_DEVICE, }, -#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ - defined(CONFIG_DEBUG_MSM_UART3) +#if defined(CONFIG_DEBUG_MSM_UART) { /* Must be last: virtual and pfn filled in by debug_ll_addr() */ .length = SZ_4K, @@ -76,8 +75,7 @@ * pages are peripheral interface or not. */ asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); -#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ - defined(CONFIG_DEBUG_MSM_UART3) +#if defined(CONFIG_DEBUG_MSM_UART) #ifdef CONFIG_MMU debug_ll_addr(&msm_io_desc[size - 1].pfn, &msm_io_desc[size - 1].virtual);
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 8a70a51..bbd8664 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c
@@ -644,7 +644,7 @@ } } - platform_device_register_simple("cpufreq-generic", -1, NULL, 0); + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); return 0; }
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e7189dc..f4d06ae 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig
@@ -1,9 +1,6 @@ menu "TI OMAP/AM/DM/DRA Family" depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 -config ARCH_OMAP - bool - config ARCH_OMAP2 bool "TI OMAP2" depends on ARCH_MULTI_V6 @@ -25,7 +22,6 @@ bool "TI OMAP4" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARCH_HAS_OPP select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP select ARM_CPU_SUSPEND if PM select ARM_ERRATA_720789 @@ -44,7 +40,6 @@ bool "TI OMAP5" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC select HAVE_ARM_SCU if SMP @@ -56,14 +51,12 @@ bool "TI AM33XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM config SOC_AM43XX bool "TI AM43x" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARCH_HAS_OPP select ARM_GIC select MACH_OMAP_GENERIC select MIGHT_HAVE_CACHE_L2X0 @@ -72,7 +65,6 @@ bool "TI DRA7XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC select HAVE_ARM_ARCH_TIMER @@ -91,6 +83,7 @@ select PINCTRL select SOC_BUS select TI_PRIV_EDMA + select OMAP_IRQCHIP help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 69bbcba..d9e9412 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile
@@ -10,7 +10,6 @@ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ omap_device.o sram.o drm.o -omap-2-3-common = irq.o hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ @@ -20,7 +19,7 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) -obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) +obj-$(CONFIG_SOC_AM33XX) += $(hwmod-common) obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common) @@ -87,9 +86,10 @@ obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o -obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o -obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o -obj-$(CONFIG_SOC_DRA7XX) += omap-mpuss-lowpower.o +omap-4-5-pm-common = pm44xx.o omap-mpuss-lowpower.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common) +obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-pm-common) obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o @@ -102,7 +102,10 @@ ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o -obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +omap-4-5-idle-common = cpuidle44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-idle-common) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-idle-common) +obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-idle-common) endif # PRCM
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index d95d0ef..d21a304 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -625,7 +625,6 @@ .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_3430sdp_init, .init_late = omap3430_init_late, .init_time = omap3_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 0d499a1..212c316 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -142,7 +142,6 @@ .map_io = omap3_map_io, .init_early = am35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_crane_init, .init_late = am35xx_init_late, .init_time = omap3_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4f9383c..1c091b3 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -366,7 +366,6 @@ .map_io = omap3_map_io, .init_early = am35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_evm_init, .init_late = am35xx_init_late, .init_time = omap3_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 018353d..c6df8ee 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -766,7 +766,6 @@ .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t35_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init, @@ -779,7 +778,6 @@ .map_io = omap3_map_io, .init_early = omap3630_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3730_init, .init_late = omap3630_init_late, .init_time = omap3_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 4eb5e6f..8a2c167 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -329,7 +329,6 @@ .map_io = omap3_map_io, .init_early = am35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, .init_time = omap3_gptimer_timer_init,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index cdc4fb9..d8e4f34 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -647,7 +647,6 @@ .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = devkit8000_init, .init_late = omap35xx_init_late, .init_time = omap3_secure_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 9480997..608079a 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c
@@ -27,7 +27,7 @@ #define gic_of_init NULL #endif -static struct of_device_id omap_dt_match_table[] __initdata = { +static const struct of_device_id omap_dt_match_table[] __initconst = { { .compatible = "simple-bus", }, { .compatible = "ti,omap-infra", }, { } @@ -43,7 +43,7 @@ } #ifdef CONFIG_SOC_OMAP2420 -static const char *omap242x_boards_compat[] __initconst = { +static const char *const omap242x_boards_compat[] __initconst = { "ti,omap2420", NULL, }; @@ -52,8 +52,6 @@ .reserve = omap_reserve, .map_io = omap242x_map_io, .init_early = omap2420_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .init_time = omap2_sync32k_timer_init, .dt_compat = omap242x_boards_compat, @@ -62,7 +60,7 @@ #endif #ifdef CONFIG_SOC_OMAP2430 -static const char *omap243x_boards_compat[] __initconst = { +static const char *const omap243x_boards_compat[] __initconst = { "ti,omap2430", NULL, }; @@ -71,8 +69,6 @@ .reserve = omap_reserve, .map_io = omap243x_map_io, .init_early = omap2430_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .init_time = omap2_sync32k_timer_init, .dt_compat = omap243x_boards_compat, @@ -81,7 +77,7 @@ #endif #ifdef CONFIG_ARCH_OMAP3 -static const char *omap3_boards_compat[] __initconst = { +static const char *const omap3_boards_compat[] __initconst = { "ti,omap3430", "ti,omap3", NULL, @@ -91,8 +87,6 @@ .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = omap3_init_late, .init_time = omap3_sync32k_timer_init, @@ -100,7 +94,7 @@ .restart = omap3xxx_restart, MACHINE_END -static const char *omap36xx_boards_compat[] __initconst = { +static const char *const omap36xx_boards_compat[] __initconst = { "ti,omap36xx", NULL, }; @@ -109,8 +103,6 @@ .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3630_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = omap3_init_late, .init_time = omap3_sync32k_timer_init, @@ -118,7 +110,7 @@ .restart = omap3xxx_restart, MACHINE_END -static const char *omap3_gp_boards_compat[] __initconst = { +static const char *const omap3_gp_boards_compat[] __initconst = { "ti,omap3-beagle", "timll,omap3-devkit8000", NULL, @@ -128,8 +120,6 @@ .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = omap3_init_late, .init_time = omap3_secure_sync32k_timer_init, @@ -137,7 +127,7 @@ .restart = omap3xxx_restart, MACHINE_END -static const char *am3517_boards_compat[] __initconst = { +static const char *const am3517_boards_compat[] __initconst = { "ti,am3517", NULL, }; @@ -146,8 +136,6 @@ .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am35xx_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = omap3_init_late, .init_time = omap3_gptimer_timer_init, @@ -157,7 +145,7 @@ #endif #ifdef CONFIG_SOC_AM33XX -static const char *am33xx_boards_compat[] __initconst = { +static const char *const am33xx_boards_compat[] __initconst = { "ti,am33xx", NULL, }; @@ -166,8 +154,6 @@ .reserve = omap_reserve, .map_io = am33xx_map_io, .init_early = am33xx_init_early, - .init_irq = omap_intc_of_init, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, .init_late = am33xx_init_late, .init_time = omap3_gptimer_timer_init, @@ -177,7 +163,7 @@ #endif #ifdef CONFIG_ARCH_OMAP4 -static const char *omap4_boards_compat[] __initconst = { +static const char *const omap4_boards_compat[] __initconst = { "ti,omap4460", "ti,omap4430", "ti,omap4", @@ -199,7 +185,7 @@ #endif #ifdef CONFIG_SOC_OMAP5 -static const char *omap5_boards_compat[] __initconst = { +static const char *const omap5_boards_compat[] __initconst = { "ti,omap5432", "ti,omap5430", "ti,omap5", @@ -221,7 +207,7 @@ #endif #ifdef CONFIG_SOC_AM43XX -static const char *am43_boards_compat[] __initconst = { +static const char *const am43_boards_compat[] __initconst = { "ti,am4372", "ti,am43", NULL, @@ -240,7 +226,9 @@ #endif #ifdef CONFIG_SOC_DRA7XX -static const char *dra74x_boards_compat[] __initconst = { +static const char *const dra74x_boards_compat[] __initconst = { + "ti,am5728", + "ti,am5726", "ti,dra742", "ti,dra7", NULL, @@ -259,7 +247,9 @@ .restart = omap44xx_restart, MACHINE_END -static const char *dra72x_boards_compat[] __initconst = { +static const char *const dra72x_boards_compat[] __initconst = { + "ti,am5718", + "ti,am5716", "ti,dra722", NULL, };
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 44a59c3..c2975af 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c
@@ -422,7 +422,6 @@ .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap_ldp_init, .init_late = omap3430_init_late, .init_time = omap3_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index aead77a..97767a2 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -33,6 +33,7 @@ #include "mmc.h" #include "soc.h" #include "gpmc-onenand.h" +#include "common-board-devices.h" #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 @@ -568,29 +569,14 @@ } #endif -static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = { +struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = { .late_init = n8x0_menelaus_late_init, }; -static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = { - { - I2C_BOARD_INFO("menelaus", 0x72), - .irq = 7 + OMAP_INTC_START, - .platform_data = &n8x0_menelaus_platform_data, - }, -}; - -static struct aic3x_pdata n810_aic33_data __initdata = { +struct aic3x_pdata n810_aic33_data __initdata = { .gpio_reset = 118, }; -static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - .platform_data = &n810_aic33_data, - }, -}; - static int __init n8x0_late_initcall(void) { if (!board_caps) @@ -612,11 +598,5 @@ board_check_revision(); spi_register_board_info(n800_spi_board_info, ARRAY_SIZE(n800_spi_board_info)); - i2c_register_board_info(0, n8x0_i2c_board_info_1, - ARRAY_SIZE(n8x0_i2c_board_info_1)); - if (board_is_n810()) - i2c_register_board_info(1, n810_i2c_board_info_2, - ARRAY_SIZE(n810_i2c_board_info_2)); - return &mmc1_data; }
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index e2e5203..81de1c6 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -588,7 +588,6 @@ .map_io = omap3_map_io, .init_early = omap3_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_beagle_init, .init_late = omap3_init_late, .init_time = omap3_secure_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index bab51e6..6049f60 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -230,7 +230,6 @@ .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init, @@ -243,7 +242,6 @@ .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index cf18340..f322016 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -624,7 +624,6 @@ .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3pandora_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index a2e035e..6311f4b 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -426,7 +426,6 @@ .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_stalker_init, .init_late = omap35xx_init_late, .init_time = omap3_secure_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 70b904c..a01993e 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -388,7 +388,6 @@ .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_touchbook_init, .init_late = omap3430_init_late, .init_time = omap3_secure_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index f6d3841..2dae6cc 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c
@@ -564,7 +564,6 @@ .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = overo_init, .init_late = omap35xx_init_late, .init_time = omap3_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index db168c9..2d1e5a6 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c
@@ -134,7 +134,6 @@ .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, .init_machine = rx51_init, .init_late = omap3430_init_late, .init_time = omap3_sync32k_timer_init,
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index f338177..07c88ae 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -1,6 +1,8 @@ #ifndef __OMAP_COMMON_BOARD_DEVICES__ #define __OMAP_COMMON_BOARD_DEVICES__ +#include <sound/tlv320aic3x.h> +#include <linux/mfd/menelaus.h> #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K @@ -12,4 +14,7 @@ struct ads7846_platform_data *board_pdata); void *n8x0_legacy_init(void); +extern struct menelaus_platform_data n8x0_menelaus_platform_data; +extern struct aic3x_pdata n810_aic33_data; + #endif /* __OMAP_COMMON_BOARD_DEVICES__ */
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index dc571f1..377eea8 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h
@@ -32,6 +32,7 @@ #include <linux/i2c/twl.h> #include <linux/i2c-omap.h> #include <linux/reboot.h> +#include <linux/irqchip/irq-omap-intc.h> #include <asm/proc-fns.h> @@ -60,7 +61,7 @@ } #endif -#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_PM) && (defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)) int omap4_pm_init(void); int omap4_pm_init_early(void); #else @@ -210,18 +211,6 @@ extern struct device *omap2_get_l3_device(void); extern struct device *omap4_get_dsp_device(void); -void omap2_init_irq(void); -void omap3_init_irq(void); -void ti81xx_init_irq(void); -extern int omap_irq_pending(void); -void omap_intc_save_context(void); -void omap_intc_restore_context(void); -void omap3_intc_suspend(void); -void omap3_intc_prepare_idle(void); -void omap3_intc_resume_idle(void); -void omap2_intc_handle_irq(struct pt_regs *regs); -void omap3_intc_handle_irq(struct pt_regs *regs); -void omap_intc_of_init(void); void omap_gic_of_init(void); #ifdef CONFIG_CACHE_L2X0 @@ -229,16 +218,6 @@ #endif struct device_node; -#ifdef CONFIG_OF -int __init intc_of_init(struct device_node *node, - struct device_node *parent); -#else -int __init intc_of_init(struct device_node *node, - struct device_node *parent) -{ - return 0; -} -#endif #ifdef CONFIG_SMP extern void __iomem *omap4_get_scu_base(void); @@ -307,7 +286,7 @@ #endif -void pdata_quirks_init(struct of_device_id *); +void pdata_quirks_init(const struct of_device_id *); void omap_auxdata_legacy_init(struct device *dev); void omap_pcs_legacy_init(int irq, void (*rearm)(void));
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index bf852d7..7a050f9 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c
@@ -544,7 +544,7 @@ MAX_MODULE_SOFTRESET_WAIT, c); if (c == MAX_MODULE_SOFTRESET_WAIT) - pr_warning("dss_core: waiting for reset to finish failed\n"); + pr_warn("dss_core: waiting for reset to finish failed\n"); else pr_debug("dss_core: softreset done\n");
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2f97228..5fa3755 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c
@@ -1243,7 +1243,7 @@ } #ifdef CONFIG_OF -static struct of_device_id gpmc_dt_ids[] = { +static const struct of_device_id gpmc_dt_ids[] = { { .compatible = "ti,omap2420-gpmc" }, { .compatible = "ti,omap2430-gpmc" }, { .compatible = "ti,omap3430-gpmc" }, /* omap3430 & omap3630 */ @@ -1440,6 +1440,8 @@ break; } + gpmc_nand_data->flash_bbt = of_get_nand_on_flash_bbt(child); + val = of_get_nand_bus_width(child); if (val == 16) gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index f78b4a1..f3897d8 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c
@@ -67,8 +67,8 @@ MAX_MODULE_SOFTRESET_WAIT, c); if (c == MAX_MODULE_SOFTRESET_WAIT) - pr_warning("%s: %s: softreset failed (waited %d usec)\n", - __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); + pr_warn("%s: %s: softreset failed (waited %d usec)\n", + __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); else pr_debug("%s: %s: softreset in %d usec\n", __func__, oh->name, c);
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index b456b44..b9d8e47 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c
@@ -99,7 +99,7 @@ MAX_MODULE_SOFTRESET_WAIT, c); if (c == MAX_MODULE_SOFTRESET_WAIT) - pr_warning("%s: %s: softreset failed (waited %d usec)\n", + pr_warn("%s: %s: softreset failed (waited %d usec)\n", __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); else pr_debug("%s: %s: softreset in %d usec\n", __func__,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5d0667c..03cbb16 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c
@@ -231,15 +231,6 @@ .length = L4_PER_44XX_SIZE, .type = MT_DEVICE, }, -#ifdef CONFIG_OMAP4_ERRATA_I688 - { - .virtual = OMAP4_SRAM_VA, - .pfn = __phys_to_pfn(OMAP4_SRAM_PA), - .length = PAGE_SIZE, - .type = MT_MEMORY_RW_SO, - }, -#endif - }; #endif @@ -269,14 +260,6 @@ .length = L4_PER_54XX_SIZE, .type = MT_DEVICE, }, -#ifdef CONFIG_OMAP4_ERRATA_I688 - { - .virtual = OMAP4_SRAM_VA, - .pfn = __phys_to_pfn(OMAP4_SRAM_PA), - .length = PAGE_SIZE, - .type = MT_MEMORY_RW_SO, - }, -#endif }; #endif @@ -667,6 +650,7 @@ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE)); omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); + omap4_pm_init_early(); omap_prm_base_init(); omap_cm_base_init(); omap44xx_prm_init(); @@ -682,6 +666,8 @@ void __init omap5_init_late(void) { omap_common_late_init(); + omap4_pm_init(); + omap2_clk_enable_autoidle_all(); } #endif @@ -695,6 +681,7 @@ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE), OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE)); omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); + omap4_pm_init_early(); omap_prm_base_init(); omap_cm_base_init(); omap44xx_prm_init(); @@ -709,6 +696,8 @@ void __init dra7xx_init_late(void) { omap_common_late_init(); + omap4_pm_init(); + omap2_clk_enable_autoidle_all(); } #endif @@ -734,8 +723,16 @@ ti_clk_init_features(); ret = of_prcm_init(); - if (!ret) - ret = omap_clk_soc_init(); + if (ret) + return ret; + + of_clk_init(NULL); + + ti_dt_clk_init_retry_clks(); + + ti_dt_clockdomains_setup(); + + ret = omap_clk_soc_init(); return ret; }
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c deleted file mode 100644 index 35b8590..0000000 --- a/arch/arm/mach-omap2/irq.c +++ /dev/null
@@ -1,380 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/irq.c - * - * Interrupt handler for OMAP2 boards. - * - * Copyright (C) 2005 Nokia Corporation - * Author: Paul Mundt <paul.mundt@nokia.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <asm/exception.h> -#include <asm/mach/irq.h> -#include <linux/irqdomain.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include "soc.h" -#include "iomap.h" -#include "common.h" - -/* selected INTC register offsets */ - -#define INTC_REVISION 0x0000 -#define INTC_SYSCONFIG 0x0010 -#define INTC_SYSSTATUS 0x0014 -#define INTC_SIR 0x0040 -#define INTC_CONTROL 0x0048 -#define INTC_PROTECTION 0x004C -#define INTC_IDLE 0x0050 -#define INTC_THRESHOLD 0x0068 -#define INTC_MIR0 0x0084 -#define INTC_MIR_CLEAR0 0x0088 -#define INTC_MIR_SET0 0x008c -#define INTC_PENDING_IRQ0 0x0098 -/* Number of IRQ state bits in each MIR register */ -#define IRQ_BITS_PER_REG 32 - -#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) -#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) -#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */ -#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */ -#define INTCPS_NR_MIR_REGS 3 -#define INTCPS_NR_IRQS 96 - -/* - * OMAP2 has a number of different interrupt controllers, each interrupt - * controller is identified as its own "bank". Register definitions are - * fairly consistent for each bank, but not all registers are implemented - * for each bank.. when in doubt, consult the TRM. - */ -static struct omap_irq_bank { - void __iomem *base_reg; - unsigned int nr_irqs; -} __attribute__ ((aligned(4))) irq_banks[] = { - { - /* MPU INTC */ - .nr_irqs = 96, - }, -}; - -static struct irq_domain *domain; - -/* Structure to save interrupt controller context */ -struct omap3_intc_regs { - u32 sysconfig; - u32 protection; - u32 idle; - u32 threshold; - u32 ilr[INTCPS_NR_IRQS]; - u32 mir[INTCPS_NR_MIR_REGS]; -}; - -/* INTC bank register get/set */ - -static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) -{ - writel_relaxed(val, bank->base_reg + reg); -} - -static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) -{ - return readl_relaxed(bank->base_reg + reg); -} - -/* XXX: FIQ and additional INTC support (only MPU at the moment) */ -static void omap_ack_irq(struct irq_data *d) -{ - intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL); -} - -static void omap_mask_ack_irq(struct irq_data *d) -{ - irq_gc_mask_disable_reg(d); - omap_ack_irq(d); -} - -static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) -{ - unsigned long tmp; - - tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff; - pr_info("IRQ: Found an INTC at 0x%p (revision %ld.%ld) with %d interrupts\n", - bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); - - tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG); - tmp |= 1 << 1; /* soft reset */ - intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG); - - while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1)) - /* Wait for reset to complete */; - - /* Enable autoidle */ - intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); -} - -int omap_irq_pending(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { - struct omap_irq_bank *bank = irq_banks + i; - int irq; - - for (irq = 0; irq < bank->nr_irqs; irq += 32) - if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 + - ((irq >> 5) << 5))) - return 1; - } - return 0; -} - -static __init void -omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("INTC", 1, irq_start, base, - handle_level_irq); - ct = gc->chip_types; - ct->chip.irq_ack = omap_mask_ack_irq; - ct->chip.irq_mask = irq_gc_mask_disable_reg; - ct->chip.irq_unmask = irq_gc_unmask_enable_reg; - ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE; - - ct->regs.enable = INTC_MIR_CLEAR0; - ct->regs.disable = INTC_MIR_SET0; - irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); -} - -static void __init omap_init_irq(u32 base, int nr_irqs, - struct device_node *node) -{ - void __iomem *omap_irq_base; - unsigned long nr_of_irqs = 0; - unsigned int nr_banks = 0; - int i, j, irq_base; - - omap_irq_base = ioremap(base, SZ_4K); - if (WARN_ON(!omap_irq_base)) - return; - - irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); - if (irq_base < 0) { - pr_warn("Couldn't allocate IRQ numbers\n"); - irq_base = 0; - } - - domain = irq_domain_add_legacy(node, nr_irqs, irq_base, 0, - &irq_domain_simple_ops, NULL); - - for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { - struct omap_irq_bank *bank = irq_banks + i; - - bank->nr_irqs = nr_irqs; - - /* Static mapping, never released */ - bank->base_reg = ioremap(base, SZ_4K); - if (!bank->base_reg) { - pr_err("Could not ioremap irq bank%i\n", i); - continue; - } - - omap_irq_bank_init_one(bank); - - for (j = 0; j < bank->nr_irqs; j += 32) - omap_alloc_gc(bank->base_reg + j, j + irq_base, 32); - - nr_of_irqs += bank->nr_irqs; - nr_banks++; - } - - pr_info("Total of %ld interrupts on %d active controller%s\n", - nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); -} - -void __init omap2_init_irq(void) -{ - omap_init_irq(OMAP24XX_IC_BASE, 96, NULL); -} - -void __init omap3_init_irq(void) -{ - omap_init_irq(OMAP34XX_IC_BASE, 96, NULL); -} - -void __init ti81xx_init_irq(void) -{ - omap_init_irq(OMAP34XX_IC_BASE, 128, NULL); -} - -static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs) -{ - u32 irqnr; - int handled_irq = 0; - - do { - irqnr = readl_relaxed(base_addr + 0x98); - if (irqnr) - goto out; - - irqnr = readl_relaxed(base_addr + 0xb8); - if (irqnr) - goto out; - - irqnr = readl_relaxed(base_addr + 0xd8); -#if IS_ENABLED(CONFIG_SOC_TI81XX) || IS_ENABLED(CONFIG_SOC_AM33XX) - if (irqnr) - goto out; - irqnr = readl_relaxed(base_addr + 0xf8); -#endif - -out: - if (!irqnr) - break; - - irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET); - irqnr &= ACTIVEIRQ_MASK; - - if (irqnr) { - irqnr = irq_find_mapping(domain, irqnr); - handle_IRQ(irqnr, regs); - handled_irq = 1; - } - } while (irqnr); - - /* If an irq is masked or deasserted while active, we will - * keep ending up here with no irq handled. So remove it from - * the INTC with an ack.*/ - if (!handled_irq) - omap_ack_irq(NULL); -} - -asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs) -{ - void __iomem *base_addr = OMAP2_IRQ_BASE; - omap_intc_handle_irq(base_addr, regs); -} - -int __init intc_of_init(struct device_node *node, - struct device_node *parent) -{ - struct resource res; - u32 nr_irq = 96; - - if (WARN_ON(!node)) - return -ENODEV; - - if (of_address_to_resource(node, 0, &res)) { - WARN(1, "unable to get intc registers\n"); - return -EINVAL; - } - - if (of_property_read_u32(node, "ti,intc-size", &nr_irq)) - pr_warn("unable to get intc-size, default to %d\n", nr_irq); - - omap_init_irq(res.start, nr_irq, of_node_get(node)); - - return 0; -} - -static struct of_device_id irq_match[] __initdata = { - { .compatible = "ti,omap2-intc", .data = intc_of_init, }, - { } -}; - -void __init omap_intc_of_init(void) -{ - of_irq_init(irq_match); -} - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) -static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; - -void omap_intc_save_context(void) -{ - int ind = 0, i = 0; - for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { - struct omap_irq_bank *bank = irq_banks + ind; - intc_context[ind].sysconfig = - intc_bank_read_reg(bank, INTC_SYSCONFIG); - intc_context[ind].protection = - intc_bank_read_reg(bank, INTC_PROTECTION); - intc_context[ind].idle = - intc_bank_read_reg(bank, INTC_IDLE); - intc_context[ind].threshold = - intc_bank_read_reg(bank, INTC_THRESHOLD); - for (i = 0; i < INTCPS_NR_IRQS; i++) - intc_context[ind].ilr[i] = - intc_bank_read_reg(bank, (0x100 + 0x4*i)); - for (i = 0; i < INTCPS_NR_MIR_REGS; i++) - intc_context[ind].mir[i] = - intc_bank_read_reg(&irq_banks[0], INTC_MIR0 + - (0x20 * i)); - } -} - -void omap_intc_restore_context(void) -{ - int ind = 0, i = 0; - - for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { - struct omap_irq_bank *bank = irq_banks + ind; - intc_bank_write_reg(intc_context[ind].sysconfig, - bank, INTC_SYSCONFIG); - intc_bank_write_reg(intc_context[ind].sysconfig, - bank, INTC_SYSCONFIG); - intc_bank_write_reg(intc_context[ind].protection, - bank, INTC_PROTECTION); - intc_bank_write_reg(intc_context[ind].idle, - bank, INTC_IDLE); - intc_bank_write_reg(intc_context[ind].threshold, - bank, INTC_THRESHOLD); - for (i = 0; i < INTCPS_NR_IRQS; i++) - intc_bank_write_reg(intc_context[ind].ilr[i], - bank, (0x100 + 0x4*i)); - for (i = 0; i < INTCPS_NR_MIR_REGS; i++) - intc_bank_write_reg(intc_context[ind].mir[i], - &irq_banks[0], INTC_MIR0 + (0x20 * i)); - } - /* MIRs are saved and restore with other PRCM registers */ -} - -void omap3_intc_suspend(void) -{ - /* A pending interrupt would prevent OMAP from entering suspend */ - omap_ack_irq(NULL); -} - -void omap3_intc_prepare_idle(void) -{ - /* - * Disable autoidle as it can stall interrupt controller, - * cf. errata ID i540 for 3430 (all revisions up to 3.1.x) - */ - intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG); -} - -void omap3_intc_resume_idle(void) -{ - /* Re-enable autoidle */ - intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG); -} - -asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs) -{ - void __iomem *base_addr = OMAP3_IRQ_BASE; - omap_intc_handle_irq(base_addr, regs); -} -#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index 828e0db..8bdf182 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c
@@ -76,8 +76,8 @@ MAX_MODULE_SOFTRESET_WAIT, c); if (c == MAX_MODULE_SOFTRESET_WAIT) - pr_warning("%s: %s: softreset failed (waited %d usec)\n", - __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); + pr_warn("%s: %s: softreset failed (waited %d usec)\n", + __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); else pr_debug("%s: %s: softreset in %d usec\n", __func__, oh->name, c);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index ac8a249..78064b0 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c
@@ -814,7 +814,7 @@ "hwmod_io", omap_mux_late_init); if (ret) - pr_warning("mux: Failed to setup hwmod io irq %d\n", ret); + pr_warn("mux: Failed to setup hwmod io irq %d\n", ret); return 0; }
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 4001325..6944ae3 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -56,6 +56,7 @@ #include "omap4-sar-layout.h" #include "pm.h" #include "prcm_mpu44xx.h" +#include "prcm_mpu54xx.h" #include "prminst44xx.h" #include "prcm44xx.h" #include "prm44xx.h" @@ -68,7 +69,6 @@ void __iomem *scu_sar_addr; void __iomem *wkup_sar_addr; void __iomem *l2x0_sar_addr; - void (*secondary_startup)(void); }; /** @@ -76,6 +76,7 @@ * @finish_suspend: CPU suspend finisher function pointer * @resume: CPU resume function pointer * @scu_prepare: CPU Snoop Control program function pointer + * @hotplug_restart: CPU restart function pointer * * Structure holds functions pointer for CPU low power operations like * suspend, resume and scu programming. @@ -84,11 +85,13 @@ int (*finish_suspend)(unsigned long cpu_state); void (*resume)(void); void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state); + void (*hotplug_restart)(void); }; static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); static struct powerdomain *mpuss_pd; static void __iomem *sar_base; +static u32 cpu_context_offset; static int default_finish_suspend(unsigned long cpu_state) { @@ -106,6 +109,7 @@ .finish_suspend = default_finish_suspend, .resume = dummy_cpu_resume, .scu_prepare = dummy_scu_prepare, + .hotplug_restart = dummy_cpu_resume, }; /* @@ -116,7 +120,8 @@ { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - writel_relaxed(addr, pm_info->wkup_sar_addr); + if (pm_info->wkup_sar_addr) + writel_relaxed(addr, pm_info->wkup_sar_addr); } /* @@ -141,7 +146,8 @@ break; } - writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr); + if (pm_info->scu_sar_addr) + writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr); } /* Helper functions for MPUSS OSWR */ @@ -161,14 +167,14 @@ if (cpu_id) { reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU1_INST, - OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET); + cpu_context_offset); omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU1_INST, - OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET); + cpu_context_offset); } else { reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU0_INST, - OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET); + cpu_context_offset); omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU0_INST, - OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET); + cpu_context_offset); } } @@ -179,7 +185,8 @@ { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - writel_relaxed(save_state, pm_info->l2x0_sar_addr); + if (pm_info->l2x0_sar_addr) + writel_relaxed(save_state, pm_info->l2x0_sar_addr); } /* @@ -189,10 +196,14 @@ #ifdef CONFIG_CACHE_L2X0 static void __init save_l2x0_context(void) { - writel_relaxed(l2x0_saved_regs.aux_ctrl, - sar_base + L2X0_AUXCTRL_OFFSET); - writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - sar_base + L2X0_PREFETCH_CTRL_OFFSET); + void __iomem *l2x0_base = omap4_get_l2cache_base(); + + if (l2x0_base && sar_base) { + writel_relaxed(l2x0_saved_regs.aux_ctrl, + sar_base + L2X0_AUXCTRL_OFFSET); + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + sar_base + L2X0_PREFETCH_CTRL_OFFSET); + } } #else static void __init save_l2x0_context(void) @@ -231,6 +242,10 @@ save_state = 1; break; case PWRDM_POWER_RET: + if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) { + save_state = 0; + break; + } default: /* * CPUx CSWR is invalid hardware state. Also CPUx OSWR @@ -298,12 +313,16 @@ if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; + /* Use the achievable power state for the domain */ + power_state = pwrdm_get_valid_lp_state(pm_info->pwrdm, + false, power_state); + if (power_state == PWRDM_POWER_OFF) cpu_state = 1; pwrdm_clear_all_prev_pwrst(pm_info->pwrdm); pwrdm_set_next_pwrst(pm_info->pwrdm, power_state); - set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); + set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.hotplug_restart)); omap_pm_ops.scu_prepare(cpu, power_state); /* @@ -319,6 +338,21 @@ /* + * Enable Mercury Fast HG retention mode by default. + */ +static void enable_mercury_retention_mode(void) +{ + u32 reg; + + reg = omap4_prcm_mpu_read_inst_reg(OMAP54XX_PRCM_MPU_DEVICE_INST, + OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET); + /* Enable HG_EN, HG_RAMPUP = fast mode */ + reg |= BIT(24) | BIT(25); + omap4_prcm_mpu_write_inst_reg(reg, OMAP54XX_PRCM_MPU_DEVICE_INST, + OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET); +} + +/* * Initialise OMAP4 MPUSS */ int __init omap4_mpuss_init(void) @@ -330,13 +364,17 @@ return -ENODEV; } - sar_base = omap4_get_sar_ram_base(); + if (cpu_is_omap44xx()) + sar_base = omap4_get_sar_ram_base(); /* Initilaise per CPU PM information */ pm_info = &per_cpu(omap4_pm_info, 0x0); - pm_info->scu_sar_addr = sar_base + SCU_OFFSET0; - pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET; - pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0; + if (sar_base) { + pm_info->scu_sar_addr = sar_base + SCU_OFFSET0; + pm_info->wkup_sar_addr = sar_base + + CPU0_WAKEUP_NS_PA_ADDR_OFFSET; + pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0; + } pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm"); if (!pm_info->pwrdm) { pr_err("Lookup failed for CPU0 pwrdm\n"); @@ -351,13 +389,12 @@ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); pm_info = &per_cpu(omap4_pm_info, 0x1); - pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; - pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; - pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; - if (cpu_is_omap446x()) - pm_info->secondary_startup = omap4460_secondary_startup; - else - pm_info->secondary_startup = omap4_secondary_startup; + if (sar_base) { + pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; + pm_info->wkup_sar_addr = sar_base + + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; + pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; + } pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); if (!pm_info->pwrdm) { @@ -380,20 +417,27 @@ pwrdm_clear_all_prev_pwrst(mpuss_pd); mpuss_clear_prev_logic_pwrst(); - /* Save device type on scratchpad for low level code to use */ - if (omap_type() != OMAP2_DEVICE_TYPE_GP) - writel_relaxed(1, sar_base + OMAP_TYPE_OFFSET); - else - writel_relaxed(0, sar_base + OMAP_TYPE_OFFSET); - - save_l2x0_context(); + if (sar_base) { + /* Save device type on scratchpad for low level code to use */ + writel_relaxed((omap_type() != OMAP2_DEVICE_TYPE_GP) ? 1 : 0, + sar_base + OMAP_TYPE_OFFSET); + save_l2x0_context(); + } if (cpu_is_omap44xx()) { omap_pm_ops.finish_suspend = omap4_finish_suspend; omap_pm_ops.resume = omap4_cpu_resume; omap_pm_ops.scu_prepare = scu_pwrst_prepare; + omap_pm_ops.hotplug_restart = omap4_secondary_startup; + cpu_context_offset = OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET; + } else if (soc_is_omap54xx() || soc_is_dra7xx()) { + cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET; + enable_mercury_retention_mode(); } + if (cpu_is_omap446x()) + omap_pm_ops.hotplug_restart = omap4460_secondary_startup; + return 0; }
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 3e97c6c..dec2b05 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h
@@ -45,6 +45,7 @@ #define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113 #define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX 0x109 +#define OMAP5_MON_AMBA_IF_INDEX 0x108 /* Secure PPA(Primary Protected Application) APIs */ #define OMAP4_PPA_L2_POR_INDEX 0x23
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 37843a7..f961c46 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -32,6 +32,7 @@ #include "soc.h" #include "omap4-sar-layout.h" #include "common.h" +#include "pm.h" #define AM43XX_NR_REG_BANKS 7 #define AM43XX_IRQS 224 @@ -381,7 +382,7 @@ static void __init irq_pm_init(void) { /* FIXME: Remove this when MPU OSWR support is added */ - if (!soc_is_omap54xx()) + if (!IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) cpu_pm_register_notifier(&irq_notifier_block); } #else @@ -406,6 +407,7 @@ { int i; unsigned int boot_cpu = smp_processor_id(); + u32 val; /* Not supported on OMAP4 ES1.0 silicon */ if (omap_rev() == OMAP4430_REV_ES1_0) { @@ -451,6 +453,22 @@ for (i = 0; i < max_irqs; i++) irq_target_cpu[i] = boot_cpu; + /* + * Enables OMAP5 ES2 PM Mode using ES2_PM_MODE in AMBA_IF_MODE + * 0x0: ES1 behavior, CPU cores would enter and exit OFF mode together. + * 0x1: ES2 behavior, CPU cores are allowed to enter/exit OFF mode + * independently. + * This needs to be set one time thanks to always ON domain. + * + * We do not support ES1 behavior anymore. OMAP5 is assumed to be + * ES2.0, and the same is applicable for DRA7. + */ + if (soc_is_omap54xx() || soc_is_dra7xx()) { + val = __raw_readl(wakeupgen_base + OMAP_AMBA_IF_MODE); + val |= BIT(5); + omap_smc1(OMAP5_MON_AMBA_IF_INDEX, val); + } + irq_hotplug_init(); irq_pm_init();
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h index b0fd16f..b3c8ecc 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.h +++ b/arch/arm/mach-omap2/omap-wakeupgen.h
@@ -27,6 +27,7 @@ #define OMAP_WKG_ENB_E_1 0x420 #define OMAP_AUX_CORE_BOOT_0 0x800 #define OMAP_AUX_CORE_BOOT_1 0x804 +#define OMAP_AMBA_IF_MODE 0x80c #define OMAP_PTMSYNCREQ_MASK 0xc00 #define OMAP_PTMSYNCREQ_EN 0xc04 #define OMAP_TIMESTAMPCYCLELO 0xc08
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index a0fe747..16b20ce 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c
@@ -25,6 +25,7 @@ #include <linux/irqchip/irq-crossbar.h> #include <linux/of_address.h> #include <linux/reboot.h> +#include <linux/genalloc.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> @@ -71,6 +72,26 @@ } EXPORT_SYMBOL(omap_bus_sync); +static int __init omap4_sram_init(void) +{ + struct device_node *np; + struct gen_pool *sram_pool; + + np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu"); + if (!np) + pr_warn("%s:Unable to allocate sram needed to handle errata I688\n", + __func__); + sram_pool = of_get_named_gen_pool(np, "sram", 0); + if (!sram_pool) + pr_warn("%s:Unable to get sram pool needed to handle errata I688\n", + __func__); + else + sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE); + + return 0; +} +omap_arch_initcall(omap4_sram_init); + /* Steal one page physical memory for barrier implementation */ int __init omap_barrier_reserve_memblock(void) { @@ -91,7 +112,6 @@ dram_io_desc[0].type = MT_MEMORY_RW_SO; iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc)); dram_sync = (void __iomem *) dram_io_desc[0].virtual; - sram_sync = (void __iomem *) OMAP4_SRAM_VA; pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", (long long) paddr, dram_io_desc[0].virtual);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 8fd87a3..716247e 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -769,8 +769,8 @@ oh->_clk = clk_get(NULL, oh->main_clk); if (IS_ERR(oh->_clk)) { - pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n", - oh->name, oh->main_clk); + pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n", + oh->name, oh->main_clk); return -EINVAL; } /* @@ -814,8 +814,8 @@ c = clk_get(NULL, os->clk); if (IS_ERR(c)) { - pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n", - oh->name, os->clk); + pr_warn("omap_hwmod: %s: cannot clk_get interface_clk %s\n", + oh->name, os->clk); ret = -EINVAL; continue; } @@ -851,8 +851,8 @@ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) { c = clk_get(NULL, oc->clk); if (IS_ERR(c)) { - pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n", - oh->name, oc->clk); + pr_warn("omap_hwmod: %s: cannot clk_get opt_clk %s\n", + oh->name, oc->clk); ret = -EINVAL; continue; } @@ -1576,7 +1576,7 @@ oh->clkdm = clkdm_lookup(oh->clkdm_name); if (!oh->clkdm) { - pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n", + pr_warn("omap_hwmod: %s: could not associate to clkdm %s\n", oh->name, oh->clkdm_name); return 0; } @@ -1616,7 +1616,7 @@ if (!ret) oh->_state = _HWMOD_STATE_CLKS_INITED; else - pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name); + pr_warn("omap_hwmod: %s: cannot _init_clocks\n", oh->name); return ret; } @@ -1739,7 +1739,7 @@ _disable_clocks(oh); if (ret == -EBUSY) - pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); + pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name); if (!ret) { /* @@ -1953,8 +1953,8 @@ c = _wait_softreset_complete(oh); if (c == MAX_MODULE_SOFTRESET_WAIT) { - pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", - oh->name, MAX_MODULE_SOFTRESET_WAIT); + pr_warn("omap_hwmod: %s: softreset failed (waited %d usec)\n", + oh->name, MAX_MODULE_SOFTRESET_WAIT); ret = -ETIMEDOUT; goto dis_opt_clks; } else { @@ -2065,7 +2065,7 @@ spin_lock_irqsave(&io_chain_lock, flags); - if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl()) + if (cpu_is_omap34xx()) omap3xxx_prm_reconfigure_io_chain(); else if (cpu_is_omap44xx()) omap44xx_prm_reconfigure_io_chain(); @@ -2185,7 +2185,7 @@ oh->mux->pads_dynamic))) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); _reconfigure_io_chain(); - } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + } else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) { _reconfigure_io_chain(); } @@ -2293,7 +2293,7 @@ if (oh->mux && oh->mux->pads_dynamic) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); _reconfigure_io_chain(); - } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + } else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) { _reconfigure_io_chain(); } @@ -2618,8 +2618,8 @@ if (oh->rst_lines_cnt == 0) { r = _enable(oh); if (r) { - pr_warning("omap_hwmod: %s: cannot be enabled for reset (%d)\n", - oh->name, oh->_state); + pr_warn("omap_hwmod: %s: cannot be enabled for reset (%d)\n", + oh->name, oh->_state); return -EINVAL; } }
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 0f97d63..512f809 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -514,6 +514,9 @@ * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module * out of idle, but rely on smart-idle to the put it back in idle, * so the wakeups are still functional (Only known case for now is UART) + * HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up + * events by calling _reconfigure_io_chain() when a device is enabled + * or idled. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -528,6 +531,7 @@ #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) #define HWMOD_SWSUP_SIDLE_ACT (1 << 12) +#define HWMOD_RECONFIG_IO_CHAIN (1 << 13) /* * omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index e9516b4..2a78b09 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -490,7 +490,7 @@ .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -509,7 +509,7 @@ .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -529,7 +529,7 @@ .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | - HWMOD_SWSUP_SIDLE_ACT, + HWMOD_SWSUP_SIDLE, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -559,7 +559,7 @@ .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", - .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -1730,8 +1730,8 @@ * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY * signal when MIDLEMODE is set to force-idle. */ - .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE - | HWMOD_FORCE_MSTANDBY, + .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE | + HWMOD_FORCE_MSTANDBY | HWMOD_RECONFIG_IO_CHAIN, }; /* usb_otg_hs */
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 90c88d4..cec9d6c 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -244,8 +244,8 @@ /* set IBE to 1 */ rx51_secure_update_aux_cr(BIT(6), 0); } else { - pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n"); - pr_warning("Thumb binaries may crash randomly without this workaround\n"); + pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n"); + pr_warn("Thumb binaries may crash randomly without this workaround\n"); } pr_info("RX-51: Registring OMAP3 HWRNG device\n"); @@ -253,6 +253,11 @@ } } + +static void __init omap3_tao3530_legacy_init(void) +{ + hsmmc2_internal_input_clk(); +} #endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_ARCH_OMAP4 @@ -336,6 +341,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { #ifdef CONFIG_MACH_NOKIA_N8X0 OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL), + OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data), + OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data), #endif #ifdef CONFIG_ARCH_OMAP3 OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata), @@ -352,6 +359,16 @@ OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata), #endif +#ifdef CONFIG_SOC_OMAP5 + OF_DEV_AUXDATA("ti,omap5-padconf", 0x4a002840, "4a002840.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,omap5-padconf", 0x4ae0c840, "4ae0c840.pinmux", &pcs_pdata), +#endif +#ifdef CONFIG_SOC_DRA7XX + OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata), +#endif +#ifdef CONFIG_SOC_AM43XX + OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata), +#endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", &omap4_iommu_pdata), @@ -377,6 +394,7 @@ { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, + { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, #endif #ifdef CONFIG_ARCH_OMAP4 { "ti,omap4-sdp", omap4_sdp_legacy_init, }, @@ -405,7 +423,7 @@ } } -void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table) +void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) { omap_sdrc_init(NULL, NULL); pdata_quirks_check(auxdata_quirks);
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 828aee9..58920bc 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c
@@ -282,7 +282,7 @@ if (!of_have_populated_dt()) devinfo.name = "omap-cpufreq"; else - devinfo.name = "cpufreq-cpu0"; + devinfo.name = "cpufreq-dt"; platform_device_register_full(&devinfo); }
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index e150102..425bfcd 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h
@@ -101,6 +101,7 @@ #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */ #define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0) +#define PM_OMAP4_CPU_OSWR_DISABLE (1 << 1) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4) extern u16 pm44xx_errata;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3f80929..175564c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c
@@ -465,7 +465,7 @@ int ret; if (!omap3_has_io_chain_ctrl()) - pr_warning("PM: no software I/O chain control; some wakeups may be lost\n"); + pr_warn("PM: no software I/O chain control; some wakeups may be lost\n"); pm_errata_configure();
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 0dda6cf..503097c 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c
@@ -29,6 +29,7 @@ struct power_state { struct powerdomain *pwrdm; u32 next_state; + u32 next_logic_state; #ifdef CONFIG_SUSPEND u32 saved_state; u32 saved_logic_state; @@ -36,6 +37,8 @@ struct list_head node; }; +static u32 cpu_suspend_state = PWRDM_POWER_OFF; + static LIST_HEAD(pwrst_list); #ifdef CONFIG_SUSPEND @@ -54,7 +57,7 @@ /* Set targeted power domain states by suspend */ list_for_each_entry(pwrst, &pwrst_list, node) { omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); - pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF); + pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->next_logic_state); } /* @@ -66,7 +69,7 @@ * domain CSWR is not supported by hardware. * More details can be found in OMAP4430 TRM section 4.3.4.2. */ - omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF); + omap4_enter_lowpower(cpu_id, cpu_suspend_state); /* Restore next powerdomain state */ list_for_each_entry(pwrst, &pwrst_list, node) { @@ -112,15 +115,22 @@ * through hotplug path and CPU0 explicitly programmed * further down in the code path */ - if (!strncmp(pwrdm->name, "cpu", 3)) + if (!strncmp(pwrdm->name, "cpu", 3)) { + if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) + cpu_suspend_state = PWRDM_POWER_RET; return 0; + } pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC); if (!pwrst) return -ENOMEM; pwrst->pwrdm = pwrdm; - pwrst->next_state = PWRDM_POWER_RET; + pwrst->next_state = pwrdm_get_valid_lp_state(pwrdm, false, + PWRDM_POWER_RET); + pwrst->next_logic_state = pwrdm_get_valid_lp_state(pwrdm, true, + PWRDM_POWER_OFF); + list_add(&pwrst->node, &pwrst_list); return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); @@ -203,6 +213,32 @@ } /** + * omap5_dra7_init_static_deps - Init static clkdm dependencies on OMAP5 and + * DRA7 + * + * The dynamic dependency between MPUSS -> EMIF is broken and has + * not worked as expected. The hardware recommendation is to + * enable static dependencies for these to avoid system + * lock ups or random crashes. + */ +static inline int omap5_dra7_init_static_deps(void) +{ + struct clockdomain *mpuss_clkdm, *emif_clkdm; + int ret; + + mpuss_clkdm = clkdm_lookup("mpu_clkdm"); + emif_clkdm = clkdm_lookup("emif_clkdm"); + if (!mpuss_clkdm || !emif_clkdm) + return -EINVAL; + + ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); + if (ret) + pr_err("Failed to add MPUSS -> EMIF wakeup dependency\n"); + + return ret; +} + +/** * omap4_pm_init_early - Does early initialization necessary for OMAP4+ devices * * Initializes basic stuff for power management functionality. @@ -212,6 +248,9 @@ if (cpu_is_omap446x()) pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; + if (soc_is_omap54xx() || soc_is_dra7xx()) + pm44xx_errata |= PM_OMAP4_CPU_OSWR_DISABLE; + return 0; } @@ -239,10 +278,14 @@ goto err2; } - if (cpu_is_omap44xx()) { + if (cpu_is_omap44xx()) ret = omap4_init_static_deps(); - if (ret) - goto err2; + else if (soc_is_omap54xx() || soc_is_dra7xx()) + ret = omap5_dra7_init_static_deps(); + + if (ret) { + pr_err("Failed to initialise static dependencies.\n"); + goto err2; } ret = omap4_mpuss_init();
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index faebd5f..7fb033e 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c
@@ -546,7 +546,8 @@ return -EINVAL; for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++) - ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]); + if (pwrdm->pwrdm_clkdms[i]) + ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]); return ret; } @@ -1080,6 +1081,82 @@ } /** + * pwrdm_get_valid_lp_state() - Find best match deep power state + * @pwrdm: power domain for which we want to find best match + * @is_logic_state: Are we looking for logic state match here? Should + * be one of PWRDM_xxx macro values + * @req_state: requested power state + * + * Returns: closest match for requested power state. default fallback + * is RET for logic state and ON for power state. + * + * This does a search from the power domain data looking for the + * closest valid power domain state that the hardware can achieve. + * PRCM definitions for PWRSTCTRL allows us to program whatever + * configuration we'd like, and PRCM will actually attempt such + * a transition, however if the powerdomain does not actually support it, + * we endup with a hung system. The valid power domain states are already + * available in our powerdomain data files. So this function tries to do + * the following: + * a) find if we have an exact match to the request - no issues. + * b) else find if a deeper power state is possible. + * c) failing which, it tries to find closest higher power state for the + * request. + */ +u8 pwrdm_get_valid_lp_state(struct powerdomain *pwrdm, + bool is_logic_state, u8 req_state) +{ + u8 pwrdm_states = is_logic_state ? pwrdm->pwrsts_logic_ret : + pwrdm->pwrsts; + /* For logic, ret is highest and others, ON is highest */ + u8 default_pwrst = is_logic_state ? PWRDM_POWER_RET : PWRDM_POWER_ON; + u8 new_pwrst; + bool found; + + /* If it is already supported, nothing to search */ + if (pwrdm_states & BIT(req_state)) + return req_state; + + if (!req_state) + goto up_search; + + /* + * So, we dont have a exact match + * Can we get a deeper power state match? + */ + new_pwrst = req_state - 1; + found = true; + while (!(pwrdm_states & BIT(new_pwrst))) { + /* No match even at OFF? Not available */ + if (new_pwrst == PWRDM_POWER_OFF) { + found = false; + break; + } + new_pwrst--; + } + + if (found) + goto done; + +up_search: + /* OK, no deeper ones, can we get a higher match? */ + new_pwrst = req_state + 1; + while (!(pwrdm_states & BIT(new_pwrst))) { + if (new_pwrst > PWRDM_POWER_ON) { + WARN(1, "powerdomain: %s: Fix max powerstate to ON\n", + pwrdm->name); + return PWRDM_POWER_ON; + } + + if (new_pwrst == default_pwrst) + break; + new_pwrst++; + } +done: + return new_pwrst; +} + +/** * omap_set_pwrdm_state - change a powerdomain's current power state * @pwrdm: struct powerdomain * to change the power state of * @pwrst: power state to change to
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index f472711..11bd4dd 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h
@@ -39,6 +39,7 @@ #define PWRSTS_OFF_RET (PWRSTS_OFF | PWRSTS_RET) #define PWRSTS_RET_ON (PWRSTS_RET | PWRSTS_ON) #define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | PWRSTS_ON) +#define PWRSTS_INA_ON (PWRSTS_INACTIVE | PWRSTS_ON) /* @@ -219,6 +220,9 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); +u8 pwrdm_get_valid_lp_state(struct powerdomain *pwrdm, + bool is_logic_state, u8 req_state); + int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); int pwrdm_read_next_pwrst(struct powerdomain *pwrdm); int pwrdm_read_pwrst(struct powerdomain *pwrdm);
diff --git a/arch/arm/mach-omap2/powerdomains54xx_data.c b/arch/arm/mach-omap2/powerdomains54xx_data.c index ce1d752..60d7ed8 100644 --- a/arch/arm/mach-omap2/powerdomains54xx_data.c +++ b/arch/arm/mach-omap2/powerdomains54xx_data.c
@@ -35,7 +35,7 @@ .prcm_offs = OMAP54XX_PRM_CORE_INST, .prcm_partition = OMAP54XX_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, - .pwrsts_logic_ret = PWRSTS_OFF_RET, + .pwrsts_logic_ret = PWRSTS_RET, .banks = 5, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* core_nret_bank */ @@ -107,8 +107,8 @@ .voltdm = { .name = "mpu" }, .prcm_offs = OMAP54XX_PRCM_MPU_PRM_C0_INST, .prcm_partition = OMAP54XX_PRCM_MPU_PARTITION, - .pwrsts = PWRSTS_OFF_RET_ON, - .pwrsts_logic_ret = PWRSTS_OFF_RET, + .pwrsts = PWRSTS_RET_ON, + .pwrsts_logic_ret = PWRSTS_RET, .banks = 1, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* cpu0_l1 */ @@ -124,8 +124,8 @@ .voltdm = { .name = "mpu" }, .prcm_offs = OMAP54XX_PRCM_MPU_PRM_C1_INST, .prcm_partition = OMAP54XX_PRCM_MPU_PARTITION, - .pwrsts = PWRSTS_OFF_RET_ON, - .pwrsts_logic_ret = PWRSTS_OFF_RET, + .pwrsts = PWRSTS_RET_ON, + .pwrsts_logic_ret = PWRSTS_RET, .banks = 1, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* cpu1_l1 */ @@ -158,7 +158,7 @@ .prcm_offs = OMAP54XX_PRM_MPU_INST, .prcm_partition = OMAP54XX_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, - .pwrsts_logic_ret = PWRSTS_OFF_RET, + .pwrsts_logic_ret = PWRSTS_RET, .banks = 2, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* mpu_l2 */
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c index 48151d1..287a203 100644 --- a/arch/arm/mach-omap2/powerdomains7xx_data.c +++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -160,8 +160,8 @@ .name = "core_pwrdm", .prcm_offs = DRA7XX_PRM_CORE_INST, .prcm_partition = DRA7XX_PRM_PARTITION, - .pwrsts = PWRSTS_RET_ON, - .pwrsts_logic_ret = PWRSTS_OFF_RET, + .pwrsts = PWRSTS_INA_ON, + .pwrsts_logic_ret = PWRSTS_RET, .banks = 5, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* core_nret_bank */ @@ -193,8 +193,8 @@ .name = "cpu0_pwrdm", .prcm_offs = DRA7XX_MPU_PRCM_PRM_C0_INST, .prcm_partition = DRA7XX_MPU_PRCM_PARTITION, - .pwrsts = PWRSTS_OFF_RET_ON, - .pwrsts_logic_ret = PWRSTS_OFF_RET, + .pwrsts = PWRSTS_RET_ON, + .pwrsts_logic_ret = PWRSTS_RET, .banks = 1, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* cpu0_l1 */ @@ -209,8 +209,8 @@ .name = "cpu1_pwrdm", .prcm_offs = DRA7XX_MPU_PRCM_PRM_C1_INST, .prcm_partition = DRA7XX_MPU_PRCM_PARTITION, - .pwrsts = PWRSTS_OFF_RET_ON, - .pwrsts_logic_ret = PWRSTS_OFF_RET, + .pwrsts = PWRSTS_RET_ON, + .pwrsts_logic_ret = PWRSTS_RET, .banks = 1, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* cpu1_l1 */ @@ -243,7 +243,7 @@ .prcm_offs = DRA7XX_PRM_MPU_INST, .prcm_partition = DRA7XX_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, - .pwrsts_logic_ret = PWRSTS_OFF_RET, + .pwrsts_logic_ret = PWRSTS_RET, .banks = 2, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* mpu_l2 */
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 2458be6..ff08da3 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -17,6 +17,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/of_irq.h> #include "soc.h" #include "common.h" @@ -45,7 +46,7 @@ .ocp_barrier = &omap3xxx_prm_ocp_barrier, .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, .restore_irqen = &omap3xxx_prm_restore_irqen, - .reconfigure_io_chain = &omap3xxx_prm_reconfigure_io_chain, + .reconfigure_io_chain = NULL, }; /* @@ -369,15 +370,30 @@ } /** - * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * omap3430_pre_es3_1_reconfigure_io_chain - restart wake-up daisy chain + * + * The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only + * thing we can do is toggle EN_IO bit for earlier omaps. + */ +void omap3430_pre_es3_1_reconfigure_io_chain(void) +{ + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, + PM_WKEN); + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, + PM_WKEN); + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); +} + +/** + * omap3_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain * * Clear any previously-latched I/O wakeup events and ensure that the * I/O wakeup gates are aligned with the current mux settings. Works * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No - * return value. + * return value. These registers are only available in 3430 es3.1 and later. */ -void omap3xxx_prm_reconfigure_io_chain(void) +void omap3_prm_reconfigure_io_chain(void) { int i = 0; @@ -400,6 +416,15 @@ } /** + * omap3xxx_prm_reconfigure_io_chain - reconfigure I/O chain + */ +void omap3xxx_prm_reconfigure_io_chain(void) +{ + if (omap3_prcm_irq_setup.reconfigure_io_chain) + omap3_prcm_irq_setup.reconfigure_io_chain(); +} + +/** * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches * * Activates the I/O wakeup event latches and allows events logged by @@ -649,6 +674,11 @@ return prm_register(&omap3xxx_prm_ll_data); } +static struct of_device_id omap3_prm_dt_match_table[] = { + { .compatible = "ti,omap3-prm" }, + { } +}; + static int omap3xxx_prm_late_init(void) { int ret; @@ -656,6 +686,25 @@ if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; + if (omap3_has_io_chain_ctrl()) + omap3_prcm_irq_setup.reconfigure_io_chain = + omap3_prm_reconfigure_io_chain; + else + omap3_prcm_irq_setup.reconfigure_io_chain = + omap3430_pre_es3_1_reconfigure_io_chain; + + if (of_have_populated_dt()) { + struct device_node *np; + int irq_num; + + np = of_find_matching_node(NULL, omap3_prm_dt_match_table); + if (np) { + irq_num = of_irq_get(np, 0); + if (irq_num >= 0) + omap3_prcm_irq_setup.irq = irq_num; + } + } + omap3xxx_prm_enable_io_wakeup(); ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); if (!ret)
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a7f6ea2..0958d07 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c
@@ -17,6 +17,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of_irq.h> #include "soc.h" @@ -32,7 +33,6 @@ /* Static data */ static const struct omap_prcm_irq omap4_prcm_irqs[] = { - OMAP_PRCM_IRQ("wkup", 0, 0), OMAP_PRCM_IRQ("io", 9, 1), }; @@ -154,21 +154,36 @@ u32 omap4_prm_vcvp_read(u8 offset) { + s32 inst = omap4_prmst_get_prm_dev_inst(); + + if (inst == PRM_INSTANCE_UNKNOWN) + return 0; + return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, - OMAP4430_PRM_DEVICE_INST, offset); + inst, offset); } void omap4_prm_vcvp_write(u32 val, u8 offset) { + s32 inst = omap4_prmst_get_prm_dev_inst(); + + if (inst == PRM_INSTANCE_UNKNOWN) + return; + omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, - OMAP4430_PRM_DEVICE_INST, offset); + inst, offset); } u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) { + s32 inst = omap4_prmst_get_prm_dev_inst(); + + if (inst == PRM_INSTANCE_UNKNOWN) + return 0; + return omap4_prminst_rmw_inst_reg_bits(mask, bits, OMAP4430_PRM_PARTITION, - OMAP4430_PRM_DEVICE_INST, + inst, offset); } @@ -275,14 +290,18 @@ void omap44xx_prm_reconfigure_io_chain(void) { int i = 0; + s32 inst = omap4_prmst_get_prm_dev_inst(); + + if (inst == PRM_INSTANCE_UNKNOWN) + return; /* Trigger WUCLKIN enable */ omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, OMAP4430_WUCLK_CTRL_MASK, - OMAP4430_PRM_DEVICE_INST, + inst, OMAP4_PRM_IO_PMCTRL_OFFSET); omap_test_timeout( - (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + (((omap4_prm_read_inst_reg(inst, OMAP4_PRM_IO_PMCTRL_OFFSET) & OMAP4430_WUCLK_STATUS_MASK) >> OMAP4430_WUCLK_STATUS_SHIFT) == 1), @@ -292,10 +311,10 @@ /* Trigger WUCLKIN disable */ omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0, - OMAP4430_PRM_DEVICE_INST, + inst, OMAP4_PRM_IO_PMCTRL_OFFSET); omap_test_timeout( - (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + (((omap4_prm_read_inst_reg(inst, OMAP4_PRM_IO_PMCTRL_OFFSET) & OMAP4430_WUCLK_STATUS_MASK) >> OMAP4430_WUCLK_STATUS_SHIFT) == 0), @@ -316,9 +335,14 @@ */ static void __init omap44xx_prm_enable_io_wakeup(void) { + s32 inst = omap4_prmst_get_prm_dev_inst(); + + if (inst == PRM_INSTANCE_UNKNOWN) + return; + omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK, OMAP4430_GLOBAL_WUEN_MASK, - OMAP4430_PRM_DEVICE_INST, + inst, OMAP4_PRM_IO_PMCTRL_OFFSET); } @@ -333,8 +357,13 @@ struct prm_reset_src_map *p; u32 r = 0; u32 v; + s32 inst = omap4_prmst_get_prm_dev_inst(); - v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + if (inst == PRM_INSTANCE_UNKNOWN) + return 0; + + + v = omap4_prm_read_inst_reg(inst, OMAP4_RM_RSTST); p = omap44xx_prm_reset_src_map; @@ -664,17 +693,56 @@ int __init omap44xx_prm_init(void) { - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) prm_features |= PRM_HAS_IO_WAKEUP; return prm_register(&omap44xx_prm_ll_data); } +static struct of_device_id omap_prm_dt_match_table[] = { + { .compatible = "ti,omap4-prm" }, + { .compatible = "ti,omap5-prm" }, + { .compatible = "ti,dra7-prm" }, + { } +}; + static int omap44xx_prm_late_init(void) { + struct device_node *np; + int irq_num; + if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; + /* OMAP4+ is DT only now */ + if (!of_have_populated_dt()) + return 0; + + np = of_find_matching_node(NULL, omap_prm_dt_match_table); + + if (!np) { + /* Default loaded up with OMAP4 values */ + if (!cpu_is_omap44xx()) + return 0; + } else { + irq_num = of_irq_get(np, 0); + /* + * Already have OMAP4 IRQ num. For all other platforms, we need + * IRQ numbers from DT + */ + if (irq_num < 0 && !cpu_is_omap44xx()) { + if (irq_num == -EPROBE_DEFER) + return irq_num; + + /* Have nothing to do */ + return 0; + } + + /* Once OMAP4 DT is filled as well */ + if (irq_num >= 0) + omap4_prcm_irq_setup.irq = irq_num; + } + omap44xx_prm_enable_io_wakeup(); return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 76ca320..ee2b522 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c
@@ -467,7 +467,7 @@ return 0; } -static struct of_device_id omap_prcm_dt_match_table[] = { +static const struct of_device_id omap_prcm_dt_match_table[] = { { .compatible = "ti,am3-prcm" }, { .compatible = "ti,am3-scrm" }, { .compatible = "ti,am4-prcm" }, @@ -525,8 +525,6 @@ memmap_index++; } - ti_dt_clockdomains_setup(); - return 0; }
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 69f0dd0..225e025 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -31,6 +31,8 @@ static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS]; +static s32 prm_dev_inst = PRM_INSTANCE_UNKNOWN; + /** * omap_prm_base_init - Populates the prm partitions * @@ -43,6 +45,24 @@ _prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base; } +s32 omap4_prmst_get_prm_dev_inst(void) +{ + if (prm_dev_inst != PRM_INSTANCE_UNKNOWN) + return prm_dev_inst; + + /* This cannot be done way early at boot.. as things are not setup */ + if (cpu_is_omap44xx()) + prm_dev_inst = OMAP4430_PRM_DEVICE_INST; + else if (soc_is_omap54xx()) + prm_dev_inst = OMAP54XX_PRM_DEVICE_INST; + else if (soc_is_dra7xx()) + prm_dev_inst = DRA7XX_PRM_DEVICE_INST; + else if (soc_is_am43xx()) + prm_dev_inst = AM43XX_PRM_DEVICE_INST; + + return prm_dev_inst; +} + /* Read a register in a PRM instance */ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx) { @@ -169,28 +189,18 @@ void omap4_prminst_global_warm_sw_reset(void) { u32 v; - s16 dev_inst; + s32 inst = omap4_prmst_get_prm_dev_inst(); - if (cpu_is_omap44xx()) - dev_inst = OMAP4430_PRM_DEVICE_INST; - else if (soc_is_omap54xx()) - dev_inst = OMAP54XX_PRM_DEVICE_INST; - else if (soc_is_dra7xx()) - dev_inst = DRA7XX_PRM_DEVICE_INST; - else if (soc_is_am43xx()) - dev_inst = AM43XX_PRM_DEVICE_INST; - else + if (inst == PRM_INSTANCE_UNKNOWN) return; - v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, dev_inst, + v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, inst, OMAP4_PRM_RSTCTRL_OFFSET); v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK; omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION, - dev_inst, - OMAP4_PRM_RSTCTRL_OFFSET); + inst, OMAP4_PRM_RSTCTRL_OFFSET); /* OCP barrier */ v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, - dev_inst, - OMAP4_PRM_RSTCTRL_OFFSET); + inst, OMAP4_PRM_RSTCTRL_OFFSET); }
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h index a2ede2d..583aa37 100644 --- a/arch/arm/mach-omap2/prminst44xx.h +++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -12,6 +12,9 @@ #ifndef __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H #define __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H +#define PRM_INSTANCE_UNKNOWN -1 +extern s32 omap4_prmst_get_prm_dev_inst(void); + /* * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index 7a42e19..d3a588c 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -20,8 +20,8 @@ unsigned long volt = voltdm_get_voltage(sr->voltdm); if (!volt) { - pr_warning("%s: Curr voltage unknown. Cannot enable %s\n", - __func__, sr->name); + pr_warn("%s: Curr voltage unknown. Cannot enable %s\n", + __func__, sr->name); return -ENODATA; }
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 1b91ef0..d7cff26 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c
@@ -154,7 +154,7 @@ pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data)); if (IS_ERR(pdev)) - pr_warning("%s: Could not build omap_device for %s: %s.\n\n", + pr_warn("%s: Could not build omap_device for %s: %s\n", __func__, name, oh->name); exit: i++;
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index ddf1818..cd488b8 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c
@@ -32,12 +32,6 @@ #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) #define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA -#else -#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#endif -#define OMAP5_SRAM_PA 0x40300000 #define SRAM_BOOTLOADER_SZ 0x00 @@ -105,32 +99,14 @@ } else { omap_sram_size = 0x8000; /* 32K */ } - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PUB_PA; - omap_sram_size = 0xa000; /* 40K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ } else { omap_sram_start = OMAP2_SRAM_PUB_PA; omap_sram_size = 0x800; /* 2K */ } } else { - if (soc_is_am33xx()) { - omap_sram_start = AM33XX_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (soc_is_am43xx()) { - omap_sram_start = AM33XX_SRAM_PA; - omap_sram_size = SZ_256K; - } else if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx()) { omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0xe000; /* 56K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ } else { omap_sram_start = OMAP2_SRAM_PA; if (cpu_is_omap242x()) @@ -148,12 +124,6 @@ { int cached = 1; -#ifdef CONFIG_OMAP4_ERRATA_I688 - if (cpu_is_omap44xx()) { - omap_sram_start += PAGE_SIZE; - omap_sram_size -= SZ_16K; - } -#endif if (cpu_is_omap34xx()) { /* * SRAM must be marked as non-cached on OMAP3 since the @@ -285,11 +255,6 @@ } #endif /* CONFIG_ARCH_OMAP3 */ -static inline int am33xx_sram_init(void) -{ - return 0; -} - int __init omap_sram_init(void) { omap_detect_sram(); @@ -299,8 +264,6 @@ omap242x_sram_init(); else if (cpu_is_omap2430()) omap243x_sram_init(); - else if (soc_is_am33xx()) - am33xx_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init();
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h index ca7277c..948d3ed 100644 --- a/arch/arm/mach-omap2/sram.h +++ b/arch/arm/mach-omap2/sram.h
@@ -74,10 +74,3 @@ */ #define OMAP2_SRAM_PA 0x40200000 #define OMAP3_SRAM_PA 0x40200000 -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PA 0x40304000 -#define OMAP4_SRAM_VA 0xfe404000 -#else -#define OMAP4_SRAM_PA 0x40300000 -#endif -#define AM33XX_SRAM_PA 0x40300000
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 43d03fb..4f61148 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c
@@ -141,7 +141,7 @@ .value = "disabled", }; -static struct of_device_id omap_timer_match[] __initdata = { +static const struct of_device_id omap_timer_match[] __initconst = { { .compatible = "ti,omap2420-timer", }, { .compatible = "ti,omap3430-timer", }, { .compatible = "ti,omap4430-timer", }, @@ -162,7 +162,7 @@ * the timer node in device-tree as disabled, to prevent the kernel from * registering this timer as a platform device and so no one else can use it. */ -static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, +static struct device_node * __init omap_get_timer_dt(const struct of_device_id *match, const char *property) { struct device_node *np; @@ -388,7 +388,7 @@ return 0; } -static struct of_device_id omap_counter_match[] __initdata = { +static const struct of_device_id omap_counter_match[] __initconst = { { .compatible = "ti,omap-counter32k", }, { } };
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index a4628a9..be9ef83 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c
@@ -198,7 +198,7 @@ loop_cnt++; if (retries_cnt > 10) { - pr_warning("%s: Retry count exceeded\n", __func__); + pr_warn("%s: Retry count exceeded\n", __func__); return -ETIMEDOUT; }
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 3ac8fe1..3783b86 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c
@@ -55,7 +55,7 @@ unsigned long voltdm_get_voltage(struct voltagedomain *voltdm) { if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); + pr_warn("%s: VDD specified does not exist!\n", __func__); return 0; } @@ -77,7 +77,7 @@ unsigned long volt = 0; if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); + pr_warn("%s: VDD specified does not exist!\n", __func__); return -EINVAL; } @@ -96,8 +96,8 @@ } if (!volt) { - pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n", - __func__, target_volt); + pr_warn("%s: not scaling. OPP voltage for %lu, not found.\n", + __func__, target_volt); return -EINVAL; } @@ -122,7 +122,7 @@ unsigned long target_volt; if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); + pr_warn("%s: VDD specified does not exist!\n", __func__); return; } @@ -152,7 +152,7 @@ struct omap_volt_data **volt_data) { if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); + pr_warn("%s: VDD specified does not exist!\n", __func__); return; } @@ -180,12 +180,12 @@ int i; if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); + pr_warn("%s: VDD specified does not exist!\n", __func__); return ERR_PTR(-EINVAL); } if (!voltdm->volt_data) { - pr_warning("%s: voltage table does not exist for vdd_%s\n", + pr_warn("%s: voltage table does not exist for vdd_%s\n", __func__, voltdm->name); return ERR_PTR(-ENODATA); } @@ -214,7 +214,7 @@ struct omap_voltdm_pmic *pmic) { if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); + pr_warn("%s: VDD specified does not exist!\n", __func__); return -EINVAL; } @@ -237,7 +237,7 @@ int voltscale_method) { if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); + pr_warn("%s: VDD specified does not exist!\n", __func__); return; } @@ -279,7 +279,7 @@ sys_ck = clk_get(NULL, voltdm->sys_clk.name); if (IS_ERR(sys_ck)) { - pr_warning("%s: Could not get sys clk.\n", __func__); + pr_warn("%s: Could not get sys clk.\n", __func__); return -EINVAL; } voltdm->sys_clk.rate = clk_get_rate(sys_ck);
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index 97d6607..ff0a68c 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c
@@ -93,8 +93,8 @@ udelay(oh->class->sysc->srst_udelay); if (c == MAX_MODULE_SOFTRESET_WAIT) - pr_warning("%s: %s: softreset failed (waited %d usec)\n", - __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); + pr_warn("%s: %s: softreset failed (waited %d usec)\n", + __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); else pr_debug("%s: %s: softreset in %d usec\n", __func__, oh->name, c);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 56edeab..09d2a26 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -550,7 +550,7 @@ break; } if (i >= 1000) { - pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n"); + pr_warn("DNS-323: Timeout accessing PHY, assuming rev B1\n"); return DNS323_REV_B1; } writel((3 << 21) /* phy ID reg */ | @@ -562,7 +562,7 @@ break; } if (i >= 1000) { - pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n"); + pr_warn("DNS-323: Timeout reading PHY, assuming rev B1\n"); return DNS323_REV_B1; } pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff); @@ -577,8 +577,8 @@ case 0x0e10: /* MV88E1118 */ return DNS323_REV_C1; default: - pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n", - reg & 0xffff); + pr_warn("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n", + reg & 0xffff); } return DNS323_REV_B1; }
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 6208d12..1208674 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -349,7 +349,7 @@ gpio_free(TSP2_RTC_GPIO); } if (tsp2_i2c_rtc.irq == 0) - pr_warning("tsp2_init: failed to get RTC IRQ\n"); + pr_warn("tsp2_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &tsp2_i2c_rtc, 1); /* register Terastation Pro II specific power-off method */
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 9136797..c725b7c 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -314,7 +314,7 @@ gpio_free(TS209_RTC_GPIO); } if (qnap_ts209_i2c_rtc.irq == 0) - pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); + pr_warn("qnap_ts209_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); /* register tsx09 specific power-off method */
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 5c079d31..cf2ab53 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -302,7 +302,7 @@ gpio_free(TS409_RTC_GPIO); } if (qnap_ts409_i2c_rtc.irq == 0) - pr_warning("qnap_ts409_init: failed to get RTC IRQ\n"); + pr_warn("qnap_ts409_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1); platform_device_register(&ts409_leds);
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index db16dae..1b704d3 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -403,8 +403,8 @@ /* enable devices if magic matches */ switch ((ts78xx_fpga.id >> 8) & 0xffffff) { case TS7800_FPGA_MAGIC: - pr_warning("unrecognised FPGA revision 0x%.2x\n", - ts78xx_fpga.id & 0xff); + pr_warn("unrecognised FPGA revision 0x%.2x\n", + ts78xx_fpga.id & 0xff); ts78xx_fpga.supports.ts_rtc.present = 1; ts78xx_fpga.supports.ts_nand.present = 1; ts78xx_fpga.supports.ts_rng.present = 1;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 6660943..ac7b3ea 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c
@@ -1071,9 +1071,47 @@ }, }; +/* + * PXA3xx SSP is basically equivalent to PXA27x. + * However, we need to register the device by the correct name in order to + * make the driver set the correct internal type, hence we provide specific + * platform_devices for each of them. + */ +struct platform_device pxa3xx_device_ssp1 = { + .name = "pxa3xx-ssp", + .id = 0, + .dev = { + .dma_mask = &pxa27x_ssp1_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa27x_resource_ssp1, + .num_resources = ARRAY_SIZE(pxa27x_resource_ssp1), +}; + +struct platform_device pxa3xx_device_ssp2 = { + .name = "pxa3xx-ssp", + .id = 1, + .dev = { + .dma_mask = &pxa27x_ssp2_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa27x_resource_ssp2, + .num_resources = ARRAY_SIZE(pxa27x_resource_ssp2), +}; + +struct platform_device pxa3xx_device_ssp3 = { + .name = "pxa3xx-ssp", + .id = 2, + .dev = { + .dma_mask = &pxa27x_ssp3_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa27x_resource_ssp3, + .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3), +}; + struct platform_device pxa3xx_device_ssp4 = { - /* PXA3xx SSP is basically equivalent to PXA27x */ - .name = "pxa27x-ssp", + .name = "pxa3xx-ssp", .id = 3, .dev = { .dma_mask = &pxa3xx_ssp4_dma_mask,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 0f3fd0d..4a13c32 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h
@@ -27,6 +27,9 @@ extern struct platform_device pxa27x_device_ssp1; extern struct platform_device pxa27x_device_ssp2; extern struct platform_device pxa27x_device_ssp3; +extern struct platform_device pxa3xx_device_ssp1; +extern struct platform_device pxa3xx_device_ssp2; +extern struct platform_device pxa3xx_device_ssp3; extern struct platform_device pxa3xx_device_ssp4; extern struct platform_device pxa25x_device_pwm0;
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 630fa91..04b013f 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c
@@ -61,7 +61,7 @@ /* * For non device-tree builds, keep legacy timer init */ -void pxa_timer_init(void) +void __init pxa_timer_init(void) { pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000), get_clock_tick_rate());
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index ee6ced1..f1dd629 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -143,6 +143,16 @@ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define CCCR_CPDIS_BIT (31) +#define CCCR_PPDIS_BIT (30) +#define CCCR_LCD_26_BIT (27) +#define CCCR_A_BIT (25) + +#define CCSR_N2_MASK CCCR_N_MASK +#define CCSR_M_MASK CCCR_M_MASK +#define CCSR_L_MASK CCCR_L_MASK +#define CCSR_N2_SHIFT 7 + #define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ #define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ #define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 9f6ec16..ad777b3 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c
@@ -416,17 +416,17 @@ static int __init lpd270_set_lcd(char *str) { - if (!strnicmp(str, "lq057q3dc02", 11)) { + if (!strncasecmp(str, "lq057q3dc02", 11)) { lpd270_lcd_to_use = &sharp_lq057q3dc02; - } else if (!strnicmp(str, "lq121s1dg31", 11)) { + } else if (!strncasecmp(str, "lq121s1dg31", 11)) { lpd270_lcd_to_use = &sharp_lq121s1dg31; - } else if (!strnicmp(str, "lq036q1da01", 11)) { + } else if (!strncasecmp(str, "lq036q1da01", 11)) { lpd270_lcd_to_use = &sharp_lq036q1da01; - } else if (!strnicmp(str, "lq64d343", 8)) { + } else if (!strncasecmp(str, "lq64d343", 8)) { lpd270_lcd_to_use = &sharp_lq64d343; - } else if (!strnicmp(str, "lq10d368", 8)) { + } else if (!strncasecmp(str, "lq10d368", 8)) { lpd270_lcd_to_use = &sharp_lq10d368; - } else if (!strnicmp(str, "lq035q7db02-20", 14)) { + } else if (!strncasecmp(str, "lq035q7db02-20", 14)) { lpd270_lcd_to_use = &sharp_lq035q7db02_20; } else { printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 593ccd35..edcbd9c 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -84,10 +84,10 @@ INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL), INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL), INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL), - INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL), - INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL), - INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa27x-ssp.2", NULL), - INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa27x-ssp.3", NULL), + INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa3xx-ssp.0", NULL), + INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa3xx-ssp.1", NULL), + INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa3xx-ssp.2", NULL), + INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa3xx-ssp.3", NULL), INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL), INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL), INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL), @@ -452,9 +452,9 @@ &pxa_device_asoc_platform, &sa1100_device_rtc, &pxa_device_rtc, - &pxa27x_device_ssp1, - &pxa27x_device_ssp2, - &pxa27x_device_ssp3, + &pxa3xx_device_ssp1, + &pxa3xx_device_ssp2, + &pxa3xx_device_ssp3, &pxa3xx_device_ssp4, &pxa27x_device_pwm0, &pxa27x_device_pwm1,
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index c437a99..6d8bbf7 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c
@@ -18,6 +18,8 @@ "qcom,apq8064", "qcom,apq8074-dragonboard", "qcom,apq8084", + "qcom,ipq8062", + "qcom,ipq8064", "qcom,msm8660-surf", "qcom,msm8960-cdp", NULL
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index d168669..ac5803c 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig
@@ -4,6 +4,7 @@ select PINCTRL_ROCKCHIP select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA select ARM_GIC select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile index 992e28b..2ebc687 100644 --- a/arch/arm/mach-rpc/Makefile +++ b/arch/arm/mach-rpc/Makefile
@@ -5,7 +5,3 @@ # Object file lists. obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o -obj-m := -obj-n := -obj- := -
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index ad5316a..9eb2229 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -32,7 +32,6 @@ select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM - select SAMSUNG_WDT_RESET help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -76,7 +75,6 @@ config CPU_S3C244X def_bool y depends on CPU_S3C2440 || CPU_S3C2442 - select SAMSUNG_WDT_RESET config CPU_S3C2443 bool "SAMSUNG S3C2443"
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 2235d0d..b920716 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile
@@ -7,11 +7,6 @@ # # Licensed under GPLv2 -obj-y := -obj-m := -obj-n := -obj- := - # core obj-y += common.o
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 44fa95d..bf50328 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c
@@ -51,7 +51,6 @@ #include <plat/devs.h> #include <plat/cpu-freq.h> #include <plat/pwm-core.h> -#include <plat/watchdog-reset.h> #include "common.h" @@ -513,7 +512,6 @@ void __init s3c2410_init_clocks(int xtal) { s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } #endif @@ -535,7 +533,6 @@ void __init s3c2440_init_clocks(int xtal) { s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } #endif @@ -543,7 +540,6 @@ void __init s3c2442_init_clocks(int xtal) { s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } #endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index ac3ff12..c7ac7e6 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h
@@ -22,7 +22,6 @@ extern void s3c2410_map_io(void); extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2410_init_clocks(int xtal); -extern void s3c2410_restart(enum reboot_mode mode, const char *cmd); extern void s3c2410_init_irq(void); #else #define s3c2410_init_clocks NULL @@ -38,7 +37,6 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2412_init_clocks(int xtal); extern int s3c2412_baseclk_add(void); -extern void s3c2412_restart(enum reboot_mode mode, const char *cmd); extern void s3c2412_init_irq(void); #else #define s3c2412_init_clocks NULL @@ -53,7 +51,6 @@ extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2416_init_clocks(int xtal); extern int s3c2416_baseclk_add(void); -extern void s3c2416_restart(enum reboot_mode mode, const char *cmd); extern void s3c2416_init_irq(void); extern struct syscore_ops s3c2416_irq_syscore_ops; @@ -67,7 +64,6 @@ #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) extern void s3c244x_map_io(void); extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c244x_restart(enum reboot_mode mode, const char *cmd); #else #define s3c244x_init_uarts NULL #endif @@ -98,7 +94,6 @@ extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2443_init_clocks(int xtal); extern int s3c2443_baseclk_add(void); -extern void s3c2443_restart(enum reboot_mode mode, const char *cmd); extern void s3c2443_init_irq(void); #else #define s3c2443_init_clocks NULL
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h index c3feff3..ffe37bd 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
@@ -42,8 +42,6 @@ #define S3C2443_URSTCON S3C2443_CLKREG(0x88) #define S3C2443_UCLKCON S3C2443_CLKREG(0x8C) -#define S3C2443_SWRST_RESET (0x533c2443) - #define S3C2443_PLLCON_OFF (1<<24) #define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7)
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 5157e25..3e63777 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -247,5 +247,4 @@ .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, .init_time = amlm5900_init_time, - .restart = s3c2410_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index e053581..d03df0d 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -430,5 +430,4 @@ .init_machine = anubis_init, .init_irq = s3c2440_init_irq, .init_time = anubis_init_time, - .restart = s3c244x_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 9db768f..9ae170f 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -218,5 +218,4 @@ .init_machine = at2440evb_init, .init_irq = s3c2440_init_irq, .init_time = at2440evb_init_time, - .restart = s3c244x_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index f9112b8..ed07cf3 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -591,5 +591,4 @@ .init_irq = s3c2410_init_irq, .init_machine = bast_init, .init_time = bast_init_time, - .restart = s3c2410_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index fc3a08d..6d1e0b9 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -597,5 +597,4 @@ .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, .init_time = gta02_init_time, - .restart = s3c244x_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index c9a99bb..d35ddc1 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -747,5 +747,4 @@ .init_irq = s3c2410_init_irq, .init_machine = h1940_init, .init_time = h1940_init_time, - .restart = s3c2410_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 7804d3c..7d99fe8 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -670,5 +670,4 @@ .map_io = jive_map_io, .init_machine = jive_machine_init, .init_time = jive_init_time, - .restart = s3c2412_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 5cc40ec..a852168 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -695,5 +695,4 @@ .init_machine = mini2440_init, .init_irq = s3c2440_init_irq, .init_time = mini2440_init_time, - .restart = s3c244x_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 3ac2a54..171c1f1 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -599,7 +599,6 @@ .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, - .restart = s3c2410_restart, MACHINE_END MACHINE_START(N35, "Acer-N35") @@ -610,5 +609,4 @@ .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, - .restart = s3c2410_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index c82c281..2a61d13 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -159,5 +159,4 @@ .init_machine = nexcoder_init, .init_irq = s3c2440_init_irq, .init_time = nexcoder_init_time, - .restart = s3c244x_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index 189147b..2f6fdc3 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -412,5 +412,4 @@ .init_irq = s3c2440_init_irq, .init_machine = osiris_init, .init_time = osiris_init_time, - .restart = s3c244x_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 4583300..345a484 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -122,5 +122,4 @@ .init_machine = otom11_init, .init_irq = s3c2410_init_irq, .init_time = otom11_init_time, - .restart = s3c2410_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 228c909..984516e 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -352,5 +352,4 @@ .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, .init_time = qt2410_init_time, - .restart = s3c2410_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index e2c6541..c3f2682 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -812,5 +812,4 @@ .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, .init_time = rx1950_init_time, - .restart = s3c244x_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index 6e749ec..cf55196 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -215,5 +215,4 @@ .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, .init_time = rx3715_init_time, - .restart = s3c244x_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index e4dcb9a..f886478 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -51,5 +51,4 @@ .map_io = s3c2416_dt_map_io, .init_irq = irqchip_init, .init_machine = s3c2416_dt_machine_init, - .restart = s3c2416_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index 419fadd..27dd660 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -124,5 +124,4 @@ .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, .init_time = smdk2410_init_time, - .restart = s3c2410_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 10726bf..586e4a3 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -138,7 +138,6 @@ .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .init_time = samsung_timer_init, - .restart = s3c2412_restart, MACHINE_END MACHINE_START(SMDK2412, "SMDK2412") @@ -150,7 +149,6 @@ .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .init_time = samsung_timer_init, - .restart = s3c2412_restart, MACHINE_END MACHINE_START(SMDK2413, "SMDK2413") @@ -162,5 +160,4 @@ .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .init_time = smdk2413_init_time, - .restart = s3c2412_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index 24189e8..86394f7 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -262,5 +262,4 @@ .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, .init_time = smdk2416_init_time, - .restart = s3c2416_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 5fb89c0a..9bb96bf 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -185,5 +185,4 @@ .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, .init_time = smdk2440_init_time, - .restart = s3c244x_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 0ed7761..87fe5c5 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -150,5 +150,4 @@ .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, .init_time = smdk2443_init_time, - .restart = s3c2443_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index c616ca2..2deb62f 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -157,5 +157,4 @@ .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, .init_time = tct_hammer_init_time, - .restart = s3c2410_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index f88c584..89f32bd 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -340,5 +340,4 @@ .init_machine = vr1000_init, .init_irq = s3c2410_init_irq, .init_time = vr1000_init_time, - .restart = s3c2410_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 9d4f647..b4460d5 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -165,5 +165,4 @@ .init_machine = vstms_init, .map_io = vstms_map_io, .init_time = vstms_init_time, - .restart = s3c2412_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 5ffe828..2a6985a 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -42,7 +42,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> -#include <plat/watchdog-reset.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -135,15 +134,3 @@ s3c2410_dev.bus = &s3c2410a_subsys; return s3c2410_init(); } - -void s3c2410_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode == REBOOT_SOFT) { - soft_restart(0); - } - - samsung_wdt_reset(); - - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -}
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 569f3f5..ecf2c77 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -48,9 +48,6 @@ #include "regs-dsc.h" #include "s3c2412-power.h" -#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) -#define S3C2412_SWRST_RESET (0x533C2412) - #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; @@ -128,26 +125,6 @@ cpu_do_idle(); } -void s3c2412_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode == REBOOT_SOFT) - soft_restart(0); - - /* errata "Watch-dog/Software Reset Problem" specifies that - * this reset must be done with the SYSCLK sourced from - * EXTCLK instead of FOUT to avoid a glitch in the reset - * mechanism. - * - * See the watchdog section of the S3C2412 manual for more - * information on this fix. - */ - - __raw_writel(0x00, S3C2412_CLKSRC); - __raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST); - - mdelay(1); -} - /* s3c2412_map_io * * register the standard cpu IO areas, and any passed in from the
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 9fe260a..bfd4da8 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -81,14 +81,6 @@ .bus = &s3c2416_subsys, }; -void s3c2416_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode == REBOOT_SOFT) - soft_restart(0); - - __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); -} - int __init s3c2416_init(void) { printk(KERN_INFO "S3C2416: Initializing architecture\n");
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index c7a804d..87b6b89 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -61,14 +61,6 @@ .bus = &s3c2443_subsys, }; -void s3c2443_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode == REBOOT_SOFT) - soft_restart(0); - - __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); -} - int __init s3c2443_init(void) { printk("S3C2443: Initialising architecture\n");
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index d1c3e65..177f978 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -42,7 +42,6 @@ #include <plat/cpu.h> #include <plat/pm.h> #include <plat/nand-core.h> -#include <plat/watchdog-reset.h> #include "common.h" #include "regs-dsc.h" @@ -137,14 +136,3 @@ .suspend = s3c244x_suspend, .resume = s3c244x_resume, }; - -void s3c244x_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode == REBOOT_SOFT) - soft_restart(0); - - samsung_wdt_reset(); - - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -}
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 58069a7..12f67b6 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile
@@ -5,11 +5,6 @@ # # Licensed under GPLv2 -obj-y := -obj-m := -obj-n := -obj- := - # Core obj-y += common.o
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 5c45aae..16547f2 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c
@@ -440,8 +440,3 @@ /* if all else fails, or mode was for soft, jump to 0 */ soft_restart(0); } - -void __init s3c64xx_init_late(void) -{ - s3c64xx_pm_late_initcall(); -}
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index 7043e7a..9eb8644 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h
@@ -23,7 +23,6 @@ void s3c64xx_init_io(struct map_desc *mach_desc, int size); void s3c64xx_restart(enum reboot_mode mode, const char *cmd); -void s3c64xx_init_late(void); void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base); @@ -52,12 +51,6 @@ #define s3c6410_init NULL #endif -#ifdef CONFIG_PM -int __init s3c64xx_pm_late_initcall(void); -#else -static inline int s3c64xx_pm_late_initcall(void) { return 0; } -#endif - #ifdef CONFIG_S3C64XX_PL080 extern struct pl08x_platform_data s3c64xx_dma0_plat_data; extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 60576df..6224c67 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -233,7 +233,6 @@ .init_irq = s3c6410_init_irq, .map_io = anw6410_map_io, .init_machine = anw6410_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index fe11633..10b913b 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -857,7 +857,6 @@ .init_irq = s3c6410_init_irq, .map_io = crag6410_map_io, .init_machine = crag6410_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 19e8feb..e4b087c 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -277,7 +277,6 @@ .init_irq = s3c6410_init_irq, .map_io = hmt_map_io, .init_machine = hmt_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 9cbc076..ab61af5 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -366,7 +366,6 @@ .init_irq = s3c6410_init_irq, .map_io = mini6410_map_io, .init_machine = mini6410_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 4bae7dc..80cb144 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -103,7 +103,6 @@ .init_irq = s3c6410_init_irq, .map_io = ncp_map_io, .init_machine = ncp_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index fbad2af..85fa959 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -335,7 +335,6 @@ .init_irq = s3c6410_init_irq, .map_io = real6410_map_io, .init_machine = real6410_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index dec4c08..33224ab 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -156,7 +156,6 @@ .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, .init_machine = smartq5_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 27b3220..fc7fece 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -172,7 +172,6 @@ .init_irq = s3c6410_init_irq, .map_io = smartq_map_io, .init_machine = smartq7_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 9107497..6f42512 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -92,7 +92,6 @@ .init_irq = s3c6400_init_irq, .map_io = smdk6400_map_io, .init_machine = smdk6400_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 1dc86d7..661eb66 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -705,7 +705,6 @@ .init_irq = s3c6410_init_irq, .map_io = smdk6410_map_io, .init_machine = smdk6410_machine_init, - .init_late = s3c64xx_init_late, .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 6b37694..aaf7bea 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c
@@ -347,10 +347,3 @@ return 0; } arch_initcall(s3c64xx_pm_initcall); - -int __init s3c64xx_pm_late_initcall(void) -{ - pm_genpd_poweroff_unused(); - - return 0; -}
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 7dc2d0e..72b9e96 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile
@@ -7,11 +7,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include -obj-y := -obj-m := -obj-n := -obj- := - # Core obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h deleted file mode 100644 index b14ffcd..0000000 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ /dev/null
@@ -1,202 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <plat/map-base.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x08) -#define S5P_EPLL_LOCK S5P_CLKREG(0x10) -#define S5P_VPLL_LOCK S5P_CLKREG(0x20) - -#define S5P_APLL_CON S5P_CLKREG(0x100) -#define S5P_MPLL_CON S5P_CLKREG(0x108) -#define S5P_EPLL_CON S5P_CLKREG(0x110) -#define S5P_EPLL_CON1 S5P_CLKREG(0x114) -#define S5P_VPLL_CON S5P_CLKREG(0x120) - -#define S5P_CLK_SRC0 S5P_CLKREG(0x200) -#define S5P_CLK_SRC1 S5P_CLKREG(0x204) -#define S5P_CLK_SRC2 S5P_CLKREG(0x208) -#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) -#define S5P_CLK_SRC4 S5P_CLKREG(0x210) -#define S5P_CLK_SRC5 S5P_CLKREG(0x214) -#define S5P_CLK_SRC6 S5P_CLKREG(0x218) - -#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280) -#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284) - -#define S5P_CLK_DIV0 S5P_CLKREG(0x300) -#define S5P_CLK_DIV1 S5P_CLKREG(0x304) -#define S5P_CLK_DIV2 S5P_CLKREG(0x308) -#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) -#define S5P_CLK_DIV4 S5P_CLKREG(0x310) -#define S5P_CLK_DIV5 S5P_CLKREG(0x314) -#define S5P_CLK_DIV6 S5P_CLKREG(0x318) -#define S5P_CLK_DIV7 S5P_CLKREG(0x31C) - -#define S5P_CLKGATE_MAIN0 S5P_CLKREG(0x400) -#define S5P_CLKGATE_MAIN1 S5P_CLKREG(0x404) -#define S5P_CLKGATE_MAIN2 S5P_CLKREG(0x408) - -#define S5P_CLKGATE_PERI0 S5P_CLKREG(0x420) -#define S5P_CLKGATE_PERI1 S5P_CLKREG(0x424) - -#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x440) -#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x444) -#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460) -#define S5P_CLKGATE_IP1 S5P_CLKREG(0x464) -#define S5P_CLKGATE_IP2 S5P_CLKREG(0x468) -#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) -#define S5P_CLKGATE_IP4 S5P_CLKREG(0x470) - -#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x480) -#define S5P_CLKGATE_BUS0 S5P_CLKREG(0x484) -#define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488) -#define S5P_CLK_OUT S5P_CLKREG(0x500) - -/* DIV/MUX STATUS */ -#define S5P_CLKDIV_STAT0 S5P_CLKREG(0x1000) -#define S5P_CLKDIV_STAT1 S5P_CLKREG(0x1004) -#define S5P_CLKMUX_STAT0 S5P_CLKREG(0x1100) -#define S5P_CLKMUX_STAT1 S5P_CLKREG(0x1104) - -/* CLKSRC0 */ -#define S5P_CLKSRC0_MUX200_SHIFT (16) -#define S5P_CLKSRC0_MUX200_MASK (0x1 << S5P_CLKSRC0_MUX200_SHIFT) -#define S5P_CLKSRC0_MUX166_MASK (0x1<<20) -#define S5P_CLKSRC0_MUX133_MASK (0x1<<24) - -/* CLKSRC2 */ -#define S5P_CLKSRC2_G3D_SHIFT (0) -#define S5P_CLKSRC2_G3D_MASK (0x3 << S5P_CLKSRC2_G3D_SHIFT) -#define S5P_CLKSRC2_MFC_SHIFT (4) -#define S5P_CLKSRC2_MFC_MASK (0x3 << S5P_CLKSRC2_MFC_SHIFT) - -/* CLKSRC6*/ -#define S5P_CLKSRC6_ONEDRAM_SHIFT (24) -#define S5P_CLKSRC6_ONEDRAM_MASK (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_APLL_SHIFT (0) -#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) -#define S5P_CLKDIV0_A2M_SHIFT (4) -#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) -#define S5P_CLKDIV0_HCLK200_SHIFT (8) -#define S5P_CLKDIV0_HCLK200_MASK (0x7 << S5P_CLKDIV0_HCLK200_SHIFT) -#define S5P_CLKDIV0_PCLK100_SHIFT (12) -#define S5P_CLKDIV0_PCLK100_MASK (0x7 << S5P_CLKDIV0_PCLK100_SHIFT) -#define S5P_CLKDIV0_HCLK166_SHIFT (16) -#define S5P_CLKDIV0_HCLK166_MASK (0xF << S5P_CLKDIV0_HCLK166_SHIFT) -#define S5P_CLKDIV0_PCLK83_SHIFT (20) -#define S5P_CLKDIV0_PCLK83_MASK (0x7 << S5P_CLKDIV0_PCLK83_SHIFT) -#define S5P_CLKDIV0_HCLK133_SHIFT (24) -#define S5P_CLKDIV0_HCLK133_MASK (0xF << S5P_CLKDIV0_HCLK133_SHIFT) -#define S5P_CLKDIV0_PCLK66_SHIFT (28) -#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT) - -/* CLKDIV2 */ -#define S5P_CLKDIV2_G3D_SHIFT (0) -#define S5P_CLKDIV2_G3D_MASK (0xF << S5P_CLKDIV2_G3D_SHIFT) -#define S5P_CLKDIV2_MFC_SHIFT (4) -#define S5P_CLKDIV2_MFC_MASK (0xF << S5P_CLKDIV2_MFC_SHIFT) - -/* CLKDIV6 */ -#define S5P_CLKDIV6_ONEDRAM_SHIFT (28) -#define S5P_CLKDIV6_ONEDRAM_MASK (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT) - -#define S5P_SWRESET S5P_CLKREG(0x2000) - -#define S5P_ARM_MCS_CON S5P_CLKREG(0x6100) - -/* Registers related to power management */ -#define S5P_PWR_CFG S5P_CLKREG(0xC000) -#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004) -#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) -#define S5P_PWR_MODE S5P_CLKREG(0xC00C) -#define S5P_NORMAL_CFG S5P_CLKREG(0xC010) -#define S5P_IDLE_CFG S5P_CLKREG(0xC020) -#define S5P_STOP_CFG S5P_CLKREG(0xC030) -#define S5P_STOP_MEM_CFG S5P_CLKREG(0xC034) -#define S5P_SLEEP_CFG S5P_CLKREG(0xC040) - -#define S5P_OSC_FREQ S5P_CLKREG(0xC100) -#define S5P_OSC_STABLE S5P_CLKREG(0xC104) -#define S5P_PWR_STABLE S5P_CLKREG(0xC108) -#define S5P_MTC_STABLE S5P_CLKREG(0xC110) -#define S5P_CLAMP_STABLE S5P_CLKREG(0xC114) - -#define S5P_WAKEUP_STAT S5P_CLKREG(0xC200) -#define S5P_BLK_PWR_STAT S5P_CLKREG(0xC204) - -#define S5P_OTHERS S5P_CLKREG(0xE000) -#define S5P_OM_STAT S5P_CLKREG(0xE100) -#define S5P_HDMI_PHY_CONTROL S5P_CLKREG(0xE804) -#define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C) -#define S5P_DAC_PHY_CONTROL S5P_CLKREG(0xE810) - -#define S5P_INFORM0 S5P_CLKREG(0xF000) -#define S5P_INFORM1 S5P_CLKREG(0xF004) -#define S5P_INFORM2 S5P_CLKREG(0xF008) -#define S5P_INFORM3 S5P_CLKREG(0xF00C) -#define S5P_INFORM4 S5P_CLKREG(0xF010) -#define S5P_INFORM5 S5P_CLKREG(0xF014) -#define S5P_INFORM6 S5P_CLKREG(0xF018) -#define S5P_INFORM7 S5P_CLKREG(0xF01C) - -#define S5P_RST_STAT S5P_CLKREG(0xA000) -#define S5P_OSC_CON S5P_CLKREG(0x8000) -#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) -#define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) -#define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) - -#define S5P_IDLE_CFG_TL_MASK (3 << 30) -#define S5P_IDLE_CFG_TM_MASK (3 << 28) -#define S5P_IDLE_CFG_TL_ON (2 << 30) -#define S5P_IDLE_CFG_TM_ON (2 << 28) -#define S5P_IDLE_CFG_DIDLE (1 << 0) - -#define S5P_CFG_WFI_CLEAN (~(3 << 8)) -#define S5P_CFG_WFI_IDLE (1 << 8) -#define S5P_CFG_WFI_STOP (2 << 8) -#define S5P_CFG_WFI_SLEEP (3 << 8) - -#define S5P_OTHER_SYS_INT 24 -#define S5P_OTHER_STA_TYPE 23 -#define S5P_OTHER_SYSC_INTOFF (1 << 0) -#define STA_TYPE_EXPON 0 -#define STA_TYPE_SFR 1 - -#define S5P_PWR_STA_EXP_SCALE 0 -#define S5P_PWR_STA_CNT 4 - -#define S5P_PWR_STABLE_COUNT 85500 - -#define S5P_SLEEP_CFG_OSC_EN (1 << 0) -#define S5P_SLEEP_CFG_USBOSC_EN (1 << 1) - -/* OTHERS Resgister */ -#define S5P_OTHERS_RET_IO (1 << 31) -#define S5P_OTHERS_RET_CF (1 << 30) -#define S5P_OTHERS_RET_MMC (1 << 29) -#define S5P_OTHERS_RET_UART (1 << 28) -#define S5P_OTHERS_USB_SIG_MASK (1 << 16) - -/* S5P_DAC_CONTROL */ -#define S5P_DAC_ENABLE (1) -#define S5P_DAC_DISABLE (0) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 123163d..21b4b13 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c
@@ -24,9 +24,8 @@ #include <plat/pm-common.h> -#include <mach/regs-clock.h> - #include "common.h" +#include "regs-clock.h" static struct sleep_save s5pv210_core_save[] = { /* Clock ETC */
diff --git a/arch/arm/mach-s5pv210/regs-clock.h b/arch/arm/mach-s5pv210/regs-clock.h new file mode 100644 index 0000000..4640f0f --- /dev/null +++ b/arch/arm/mach-s5pv210/regs-clock.h
@@ -0,0 +1,201 @@ +/* + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <plat/map-base.h> + +#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S5P_APLL_LOCK S5P_CLKREG(0x00) +#define S5P_MPLL_LOCK S5P_CLKREG(0x08) +#define S5P_EPLL_LOCK S5P_CLKREG(0x10) +#define S5P_VPLL_LOCK S5P_CLKREG(0x20) + +#define S5P_APLL_CON S5P_CLKREG(0x100) +#define S5P_MPLL_CON S5P_CLKREG(0x108) +#define S5P_EPLL_CON S5P_CLKREG(0x110) +#define S5P_EPLL_CON1 S5P_CLKREG(0x114) +#define S5P_VPLL_CON S5P_CLKREG(0x120) + +#define S5P_CLK_SRC0 S5P_CLKREG(0x200) +#define S5P_CLK_SRC1 S5P_CLKREG(0x204) +#define S5P_CLK_SRC2 S5P_CLKREG(0x208) +#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) +#define S5P_CLK_SRC4 S5P_CLKREG(0x210) +#define S5P_CLK_SRC5 S5P_CLKREG(0x214) +#define S5P_CLK_SRC6 S5P_CLKREG(0x218) + +#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280) +#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284) + +#define S5P_CLK_DIV0 S5P_CLKREG(0x300) +#define S5P_CLK_DIV1 S5P_CLKREG(0x304) +#define S5P_CLK_DIV2 S5P_CLKREG(0x308) +#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) +#define S5P_CLK_DIV4 S5P_CLKREG(0x310) +#define S5P_CLK_DIV5 S5P_CLKREG(0x314) +#define S5P_CLK_DIV6 S5P_CLKREG(0x318) +#define S5P_CLK_DIV7 S5P_CLKREG(0x31C) + +#define S5P_CLKGATE_MAIN0 S5P_CLKREG(0x400) +#define S5P_CLKGATE_MAIN1 S5P_CLKREG(0x404) +#define S5P_CLKGATE_MAIN2 S5P_CLKREG(0x408) + +#define S5P_CLKGATE_PERI0 S5P_CLKREG(0x420) +#define S5P_CLKGATE_PERI1 S5P_CLKREG(0x424) + +#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x440) +#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x444) +#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460) +#define S5P_CLKGATE_IP1 S5P_CLKREG(0x464) +#define S5P_CLKGATE_IP2 S5P_CLKREG(0x468) +#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) +#define S5P_CLKGATE_IP4 S5P_CLKREG(0x470) + +#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x480) +#define S5P_CLKGATE_BUS0 S5P_CLKREG(0x484) +#define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488) +#define S5P_CLK_OUT S5P_CLKREG(0x500) + +/* DIV/MUX STATUS */ +#define S5P_CLKDIV_STAT0 S5P_CLKREG(0x1000) +#define S5P_CLKDIV_STAT1 S5P_CLKREG(0x1004) +#define S5P_CLKMUX_STAT0 S5P_CLKREG(0x1100) +#define S5P_CLKMUX_STAT1 S5P_CLKREG(0x1104) + +/* CLKSRC0 */ +#define S5P_CLKSRC0_MUX200_SHIFT (16) +#define S5P_CLKSRC0_MUX200_MASK (0x1 << S5P_CLKSRC0_MUX200_SHIFT) +#define S5P_CLKSRC0_MUX166_MASK (0x1<<20) +#define S5P_CLKSRC0_MUX133_MASK (0x1<<24) + +/* CLKSRC2 */ +#define S5P_CLKSRC2_G3D_SHIFT (0) +#define S5P_CLKSRC2_G3D_MASK (0x3 << S5P_CLKSRC2_G3D_SHIFT) +#define S5P_CLKSRC2_MFC_SHIFT (4) +#define S5P_CLKSRC2_MFC_MASK (0x3 << S5P_CLKSRC2_MFC_SHIFT) + +/* CLKSRC6*/ +#define S5P_CLKSRC6_ONEDRAM_SHIFT (24) +#define S5P_CLKSRC6_ONEDRAM_MASK (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT) + +/* CLKDIV0 */ +#define S5P_CLKDIV0_APLL_SHIFT (0) +#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) +#define S5P_CLKDIV0_A2M_SHIFT (4) +#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) +#define S5P_CLKDIV0_HCLK200_SHIFT (8) +#define S5P_CLKDIV0_HCLK200_MASK (0x7 << S5P_CLKDIV0_HCLK200_SHIFT) +#define S5P_CLKDIV0_PCLK100_SHIFT (12) +#define S5P_CLKDIV0_PCLK100_MASK (0x7 << S5P_CLKDIV0_PCLK100_SHIFT) +#define S5P_CLKDIV0_HCLK166_SHIFT (16) +#define S5P_CLKDIV0_HCLK166_MASK (0xF << S5P_CLKDIV0_HCLK166_SHIFT) +#define S5P_CLKDIV0_PCLK83_SHIFT (20) +#define S5P_CLKDIV0_PCLK83_MASK (0x7 << S5P_CLKDIV0_PCLK83_SHIFT) +#define S5P_CLKDIV0_HCLK133_SHIFT (24) +#define S5P_CLKDIV0_HCLK133_MASK (0xF << S5P_CLKDIV0_HCLK133_SHIFT) +#define S5P_CLKDIV0_PCLK66_SHIFT (28) +#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT) + +/* CLKDIV2 */ +#define S5P_CLKDIV2_G3D_SHIFT (0) +#define S5P_CLKDIV2_G3D_MASK (0xF << S5P_CLKDIV2_G3D_SHIFT) +#define S5P_CLKDIV2_MFC_SHIFT (4) +#define S5P_CLKDIV2_MFC_MASK (0xF << S5P_CLKDIV2_MFC_SHIFT) + +/* CLKDIV6 */ +#define S5P_CLKDIV6_ONEDRAM_SHIFT (28) +#define S5P_CLKDIV6_ONEDRAM_MASK (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT) + +#define S5P_SWRESET S5P_CLKREG(0x2000) + +#define S5P_ARM_MCS_CON S5P_CLKREG(0x6100) + +/* Registers related to power management */ +#define S5P_PWR_CFG S5P_CLKREG(0xC000) +#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004) +#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) +#define S5P_PWR_MODE S5P_CLKREG(0xC00C) +#define S5P_NORMAL_CFG S5P_CLKREG(0xC010) +#define S5P_IDLE_CFG S5P_CLKREG(0xC020) +#define S5P_STOP_CFG S5P_CLKREG(0xC030) +#define S5P_STOP_MEM_CFG S5P_CLKREG(0xC034) +#define S5P_SLEEP_CFG S5P_CLKREG(0xC040) + +#define S5P_OSC_FREQ S5P_CLKREG(0xC100) +#define S5P_OSC_STABLE S5P_CLKREG(0xC104) +#define S5P_PWR_STABLE S5P_CLKREG(0xC108) +#define S5P_MTC_STABLE S5P_CLKREG(0xC110) +#define S5P_CLAMP_STABLE S5P_CLKREG(0xC114) + +#define S5P_WAKEUP_STAT S5P_CLKREG(0xC200) +#define S5P_BLK_PWR_STAT S5P_CLKREG(0xC204) + +#define S5P_OTHERS S5P_CLKREG(0xE000) +#define S5P_OM_STAT S5P_CLKREG(0xE100) +#define S5P_HDMI_PHY_CONTROL S5P_CLKREG(0xE804) +#define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C) +#define S5P_DAC_PHY_CONTROL S5P_CLKREG(0xE810) + +#define S5P_INFORM0 S5P_CLKREG(0xF000) +#define S5P_INFORM1 S5P_CLKREG(0xF004) +#define S5P_INFORM2 S5P_CLKREG(0xF008) +#define S5P_INFORM3 S5P_CLKREG(0xF00C) +#define S5P_INFORM4 S5P_CLKREG(0xF010) +#define S5P_INFORM5 S5P_CLKREG(0xF014) +#define S5P_INFORM6 S5P_CLKREG(0xF018) +#define S5P_INFORM7 S5P_CLKREG(0xF01C) + +#define S5P_RST_STAT S5P_CLKREG(0xA000) +#define S5P_OSC_CON S5P_CLKREG(0x8000) +#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) +#define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) +#define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) + +#define S5P_IDLE_CFG_TL_MASK (3 << 30) +#define S5P_IDLE_CFG_TM_MASK (3 << 28) +#define S5P_IDLE_CFG_TL_ON (2 << 30) +#define S5P_IDLE_CFG_TM_ON (2 << 28) +#define S5P_IDLE_CFG_DIDLE (1 << 0) + +#define S5P_CFG_WFI_CLEAN (~(3 << 8)) +#define S5P_CFG_WFI_IDLE (1 << 8) +#define S5P_CFG_WFI_STOP (2 << 8) +#define S5P_CFG_WFI_SLEEP (3 << 8) + +#define S5P_OTHER_SYS_INT 24 +#define S5P_OTHER_STA_TYPE 23 +#define S5P_OTHER_SYSC_INTOFF (1 << 0) +#define STA_TYPE_EXPON 0 +#define STA_TYPE_SFR 1 + +#define S5P_PWR_STA_EXP_SCALE 0 +#define S5P_PWR_STA_CNT 4 + +#define S5P_PWR_STABLE_COUNT 85500 + +#define S5P_SLEEP_CFG_OSC_EN (1 << 0) +#define S5P_SLEEP_CFG_USBOSC_EN (1 << 1) + +/* OTHERS Resgister */ +#define S5P_OTHERS_RET_IO (1 << 31) +#define S5P_OTHERS_RET_CF (1 << 30) +#define S5P_OTHERS_RET_MMC (1 << 29) +#define S5P_OTHERS_RET_UART (1 << 28) +#define S5P_OTHERS_USB_SIG_MASK (1 << 16) + +/* S5P_DAC_CONTROL */ +#define S5P_DAC_ENABLE (1) +#define S5P_DAC_DISABLE (0) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv210/s5pv210.c b/arch/arm/mach-s5pv210/s5pv210.c index 53feff3..43eb1ea 100644 --- a/arch/arm/mach-s5pv210/s5pv210.c +++ b/arch/arm/mach-s5pv210/s5pv210.c
@@ -18,9 +18,9 @@ #include <asm/system_misc.h> #include <plat/map-base.h> -#include <mach/regs-clock.h> #include "common.h" +#include "regs-clock.h" static int __init s5pv210_fdt_map_sys(unsigned long node, const char *uname, int depth, void *data)
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 04f9784..c6f6ed1 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig
@@ -58,6 +58,7 @@ bool "Compaq iPAQ H3100" select ARM_SA1110_CPUFREQ select HTC_EGPIO + select MFD_IPAQ_MICRO help Say Y here if you intend to run this kernel on the Compaq iPAQ H3100 handheld computer. Information about this machine and the @@ -69,6 +70,7 @@ bool "Compaq iPAQ H3600/H3700" select ARM_SA1110_CPUFREQ select HTC_EGPIO + select MFD_IPAQ_MICRO help Say Y here if you intend to run this kernel on the Compaq iPAQ H3600 handheld computer. Information about this machine and the
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 2732eef..f1114d1 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile
@@ -4,9 +4,6 @@ # Common support obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o -obj-m := -obj-n := -obj- := # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index c79bf46..b1d4faa 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -25,6 +25,7 @@ #include <asm/mach/map.h> #include <mach/h3xxx.h> +#include <mach/irqs.h> #include "generic.h" @@ -244,9 +245,23 @@ }, }; +static struct resource h3xxx_micro_resources[] = { + DEFINE_RES_MEM(0x80010000, SZ_4K), + DEFINE_RES_MEM(0x80020000, SZ_4K), + DEFINE_RES_IRQ(IRQ_Ser1UART), +}; + +struct platform_device h3xxx_micro_asic = { + .name = "ipaq-h3xxx-micro", + .id = -1, + .resource = h3xxx_micro_resources, + .num_resources = ARRAY_SIZE(h3xxx_micro_resources), +}; + static struct platform_device *h3xxx_devices[] = { &h3xxx_egpio, &h3xxx_keys, + &h3xxx_micro_asic, }; void __init h3xxx_mach_init(void)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 1e6c51c..21f457b 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,6 +1,30 @@ config ARCH_SHMOBILE bool +config PM_RCAR + bool + +config PM_RMOBILE + bool + +config ARCH_RCAR_GEN1 + bool + select PM_RCAR if PM || SMP + select RENESAS_INTC_IRQPIN + select SYS_SUPPORTS_SH_TMU + +config ARCH_RCAR_GEN2 + bool + select PM_RCAR if PM || SMP + select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + +config ARCH_RMOBILE + bool + select PM_RMOBILE if PM && !ARCH_SHMOBILE_MULTI + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU + menuconfig ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU @@ -26,27 +50,29 @@ bool "RZ/A1H (R7S72100)" select SYS_SUPPORTS_SH_MTU2 +config ARCH_R8A7740 + bool "R-Mobile A1 (R8A77400)" + select ARCH_RMOBILE + select RENESAS_INTC_IRQPIN + config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" - select RENESAS_INTC_IRQPIN - select SYS_SUPPORTS_SH_TMU + select ARCH_RCAR_GEN1 config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" - select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT + select ARCH_RCAR_GEN2 config ARCH_R8A7791 - bool "R-Car M2 (R8A77910)" - select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT + bool "R-Car M2-W (R8A77910)" + select ARCH_RCAR_GEN2 + +config ARCH_R8A7794 + bool "R-Car E2 (R8A77940)" + select ARCH_RCAR_GEN2 comment "Renesas ARM SoCs Board Type" -config MACH_GENMAI - bool "Genmai board" - depends on ARCH_R7S72100 - config MACH_KOELSCH bool "Koelsch board" depends on ARCH_R8A7791 @@ -71,94 +97,62 @@ config ARCH_SH7372 bool "SH-Mobile AP4 (SH7372)" + select ARCH_RMOBILE select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_CPU_SUSPEND if PM || CPU_IDLE - select CPU_V7 - select SH_CLK_CPG select SH_INTC - select SYS_SUPPORTS_SH_CMT - select SYS_SUPPORTS_SH_TMU config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" + select ARCH_RMOBILE select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 select I2C - select SH_CLK_CPG select SH_INTC select RENESAS_INTC_IRQPIN - select SYS_SUPPORTS_SH_CMT - select SYS_SUPPORTS_SH_TMU config ARCH_R8A73A4 bool "R-Mobile APE6 (R8A73A40)" + select ARCH_RMOBILE select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 - select SH_CLK_CPG select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT - select SYS_SUPPORTS_SH_TMU config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" + select ARCH_RMOBILE select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 - select SH_CLK_CPG select RENESAS_INTC_IRQPIN - select SYS_SUPPORTS_SH_CMT - select SYS_SUPPORTS_SH_TMU config ARCH_R8A7778 bool "R-Car M1A (R8A77781)" + select ARCH_RCAR_GEN1 select ARCH_WANT_OPTIONAL_GPIOLIB - select CPU_V7 - select SH_CLK_CPG select ARM_GIC - select SYS_SUPPORTS_SH_TMU - select RENESAS_INTC_IRQPIN config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" + select ARCH_RCAR_GEN1 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 - select SH_CLK_CPG - select RENESAS_INTC_IRQPIN - select SYS_SUPPORTS_SH_TMU config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" + select ARCH_RCAR_GEN2 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 select MIGHT_HAVE_PCI - select SH_CLK_CPG - select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE config ARCH_R8A7791 - bool "R-Car M2 (R8A77910)" + bool "R-Car M2-W (R8A77910)" + select ARCH_RCAR_GEN2 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 select MIGHT_HAVE_PCI - select SH_CLK_CPG - select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE -config ARCH_R7S72100 - bool "RZ/A1H (R7S72100)" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select CPU_V7 - select SH_CLK_CPG - select SYS_SUPPORTS_SH_MTU2 - comment "Renesas ARM SoCs Board Type" config MACH_APE6EVM @@ -197,21 +191,6 @@ select SND_SOC_WM8978 if SND_SIMPLE_CARD select USE_OF -config MACH_ARMADILLO800EVA_REFERENCE - bool "Armadillo-800 EVA board - Reference Device Tree Implementation" - depends on ARCH_R8A7740 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SMSC_PHY if SH_ETH - select SND_SOC_WM8978 if SND_SIMPLE_CARD - select USE_OF - ---help--- - Use reference implementation of Armadillo800 EVA board support - which makes greater use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - config MACH_BOCKW bool "BOCK-W platform" depends on ARCH_R8A7778 @@ -234,11 +213,6 @@ This is intended to aid developers -config MACH_GENMAI - bool "Genmai board" - depends on ARCH_R7S72100 - select USE_OF - config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fe3878a..e20f278 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile
@@ -2,21 +2,19 @@ # Makefile for the linux kernel. # -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/include - # Common objects obj-y := timer.o console.o # CPU objects -obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o -obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o +obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o pm-sh7372.o +obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o -obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o +obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o -obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o -obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o setup-rcar-gen2.o +obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o pm-r8a7790.o +obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o pm-r8a7791.o +obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o @@ -31,13 +29,13 @@ obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o -obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o endif # CPU reset vector handling objects cpu-y := platsmp.o headsmp.o -cpu-$(CONFIG_ARCH_R8A7790) += platsmp-apmu.o -cpu-$(CONFIG_ARCH_R8A7791) += platsmp-apmu.o + +# Shared SoC family objects +obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y) # SMP objects smp-y := $(cpu-y) @@ -51,19 +49,14 @@ obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o -obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o pm-rmobile.o -obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o -obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o pm-rmobile.o -obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o pm-rcar.o -obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o $(cpu-y) -obj-$(CONFIG_ARCH_R8A7791) += pm-r8a7791.o pm-rcar.o $(cpu-y) +obj-$(CONFIG_PM_RCAR) += pm-rcar.o +obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o -# IRQ objects -obj-$(CONFIG_ARCH_SH7372) += entry-intc.o +# special sh7372 handling for IRQ objects and low level sleep code +obj-$(CONFIG_ARCH_SH7372) += entry-intc.o sleep-sh7372.o # Board objects ifdef CONFIG_ARCH_SHMOBILE_MULTI -obj-$(CONFIG_MACH_GENMAI) += board-genmai-reference.o obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o @@ -73,11 +66,9 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o -obj-$(CONFIG_MACH_GENMAI) += board-genmai.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o -obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index ebf97d4..de9a238 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -3,10 +3,8 @@ loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000 loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000 -loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 -loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c index 2f7723e..a6503d8 100644 --- a/arch/arm/mach-shmobile/board-ape6evm-reference.c +++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -50,7 +50,6 @@ r8a73a4_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0); } static const char *ape6evm_boards_compat_dt[] __initdata = { @@ -59,7 +58,8 @@ }; DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_early = r8a73a4_init_early, + .init_early = shmobile_init_delay, .init_machine = ape6evm_add_standard_devices, + .init_late = shmobile_init_late, .dt_compat = ape6evm_boards_compat_dt, MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 1585b88..b222f68 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -283,7 +283,8 @@ }; DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_early = r8a73a4_init_early, + .init_early = shmobile_init_delay, .init_machine = ape6evm_add_standard_devices, + .init_late = shmobile_init_late, .dt_compat = ape6evm_boards_compat_dt, MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c deleted file mode 100644 index 84bc6cb..0000000 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ /dev/null
@@ -1,198 +0,0 @@ -/* - * armadillo 800 eva board support - * - * Copyright (C) 2012 Renesas Solutions Corp. - * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/hardware/cache-l2x0.h> - -#include "common.h" -#include "r8a7740.h" - -/* - * CON1 Camera Module - * CON2 Extension Bus - * CON3 HDMI Output - * CON4 Composite Video Output - * CON5 H-UDI JTAG - * CON6 ARM JTAG - * CON7 SD1 - * CON8 SD2 - * CON9 RTC BackUp - * CON10 Monaural Mic Input - * CON11 Stereo Headphone Output - * CON12 Audio Line Output(L) - * CON13 Audio Line Output(R) - * CON14 AWL13 Module - * CON15 Extension - * CON16 LCD1 - * CON17 LCD2 - * CON19 Power Input - * CON20 USB1 - * CON21 USB2 - * CON22 Serial - * CON23 LAN - * CON24 USB3 - * LED1 Camera LED (Yellow) - * LED2 Power LED (Green) - * LED3-LED6 User LED (Yellow) - * LED7 LAN link LED (Green) - * LED8 LAN activity LED (Yellow) - */ - -/* - * DipSwitch - * - * SW1 - * - * -12345678-+---------------+---------------------------- - * 1 | boot | hermit - * 0 | boot | OS auto boot - * -12345678-+---------------+---------------------------- - * 00 | boot device | eMMC - * 10 | boot device | SDHI0 (CON7) - * 01 | boot device | - - * 11 | boot device | Extension Buss (CS0) - * -12345678-+---------------+---------------------------- - * 0 | Extension Bus | D8-D15 disable, eMMC enable - * 1 | Extension Bus | D8-D15 enable, eMMC disable - * -12345678-+---------------+---------------------------- - * 0 | SDHI1 | COM8 disable, COM14 enable - * 1 | SDHI1 | COM8 enable, COM14 disable - * -12345678-+---------------+---------------------------- - * 0 | USB0 | COM20 enable, COM24 disable - * 1 | USB0 | COM20 disable, COM24 enable - * -12345678-+---------------+---------------------------- - * 00 | JTAG | SH-X2 - * 10 | JTAG | ARM - * 01 | JTAG | - - * 11 | JTAG | Boundary Scan - *-----------+---------------+---------------------------- - */ - -/* - * FSI-WM8978 - * - * this command is required when playback. - * - * # amixer set "Headphone" 50 - * - * this command is required when capture. - * - * # amixer set "Input PGA" 15 - * # amixer set "Left Input Mixer MicP" on - * # amixer set "Left Input Mixer MicN" on - * # amixer set "Right Input Mixer MicN" on - * # amixer set "Right Input Mixer MicP" on - */ - -/* - * USB function - * - * When you use USB Function, - * set SW1.6 ON, and connect cable to CN24. - * - * USBF needs workaround on R8A7740 chip. - * These are a little bit complex. - * see - * usbhsf_power_ctrl() - */ - -static void __init eva_clock_init(void) -{ - struct clk *system = clk_get(NULL, "system_clk"); - struct clk *xtal1 = clk_get(NULL, "extal1"); - struct clk *usb24s = clk_get(NULL, "usb24s"); - struct clk *fsibck = clk_get(NULL, "fsibck"); - - if (IS_ERR(system) || - IS_ERR(xtal1) || - IS_ERR(usb24s) || - IS_ERR(fsibck)) { - pr_err("armadillo800eva board clock init failed\n"); - goto clock_error; - } - - /* armadillo 800 eva extal1 is 24MHz */ - clk_set_rate(xtal1, 24000000); - - /* usb24s use extal1 (= system) clock (= 24MHz) */ - clk_set_parent(usb24s, system); - - /* FSIBCK is 12.288MHz, and it is parent of FSI-B */ - clk_set_rate(fsibck, 12288000); - -clock_error: - if (!IS_ERR(system)) - clk_put(system); - if (!IS_ERR(xtal1)) - clk_put(xtal1); - if (!IS_ERR(usb24s)) - clk_put(usb24s); - if (!IS_ERR(fsibck)) - clk_put(fsibck); -} - -/* - * board init - */ -static void __init eva_init(void) -{ - r8a7740_clock_init(MD_CK0 | MD_CK2); - eva_clock_init(); - - r8a7740_meram_workaround(); - -#ifdef CONFIG_CACHE_L2X0 - /* Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); -#endif - - r8a7740_add_standard_devices_dt(); - - r8a7740_pm_init(); -} - -#define RESCNT2 IOMEM(0xe6188020) -static void eva_restart(enum reboot_mode mode, const char *cmd) -{ - /* Do soft power on reset */ - writel(1 << 31, RESCNT2); -} - -static const char *eva_boards_compat_dt[] __initdata = { - "renesas,armadillo800eva-reference", - NULL, -}; - -DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference") - .map_io = r8a7740_map_io, - .init_early = shmobile_init_delay, - .init_irq = r8a7740_init_irq_of, - .init_machine = eva_init, - .init_late = shmobile_init_late, - .dt_compat = eva_boards_compat_dt, - .restart = eva_restart, -MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 6dbaad6..e709835 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1231,6 +1231,10 @@ #define GPIO_PORT8CR IOMEM(0xe6050008) static void __init eva_init(void) { + static struct pm_domain_device domain_devices[] __initdata = { + { "A4LC", &lcdc0_device }, + { "A4LC", &hdmi_lcdc_device }, + }; struct platform_device *usb = NULL; regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, @@ -1316,8 +1320,8 @@ platform_add_devices(eva_devices, ARRAY_SIZE(eva_devices)); - rmobile_add_device_to_domain("A4LC", &lcdc0_device); - rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device); + rmobile_add_devices_to_domains(domain_devices, + ARRAY_SIZE(domain_devices)); if (usb) rmobile_add_device_to_domain("A3SP", usb);
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c index ba840cd..79c4784 100644 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -80,8 +80,9 @@ }; DT_MACHINE_START(BOCKW_DT, "bockw") - .init_early = r8a7778_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7778_init_irq_dt, .init_machine = bockw_init, + .init_late = shmobile_init_late, .dt_compat = bockw_boards_compat_dt, MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 8a83eb3..1cf2c75 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -733,7 +733,7 @@ }; DT_MACHINE_START(BOCKW_DT, "bockw") - .init_early = r8a7778_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7778_init_irq_dt, .init_machine = bockw_init, .dt_compat = bockw_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c deleted file mode 100644 index e5448f7..0000000 --- a/arch/arm/mach-shmobile/board-genmai-reference.c +++ /dev/null
@@ -1,55 +0,0 @@ -/* - * Genmai board support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/of_platform.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "clock.h" -#include "common.h" -#include "r7s72100.h" - -/* - * This is a really crude hack to provide clkdev support to platform - * devices until they get moved to DT. - */ -static const struct clk_name clk_names[] = { - { "mtu2", "fck", "sh-mtu2" }, -}; - -static void __init genmai_add_standard_devices(void) -{ - shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), true); - r7s72100_add_dt_devices(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const genmai_boards_compat_dt[] __initconst = { - "renesas,genmai", - NULL, -}; - -DT_MACHINE_START(GENMAI_DT, "genmai") - .init_early = shmobile_init_delay, - .init_machine = genmai_add_standard_devices, - .dt_compat = genmai_boards_compat_dt, -MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c deleted file mode 100644 index 7bf2d80..0000000 --- a/arch/arm/mach-shmobile/board-genmai.c +++ /dev/null
@@ -1,161 +0,0 @@ -/* - * Genmai board support - * - * Copyright (C) 2013-2014 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * Copyright (C) 2014 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/serial_sci.h> -#include <linux/sh_eth.h> -#include <linux/spi/rspi.h> -#include <linux/spi/spi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "irqs.h" -#include "r7s72100.h" - -/* Ether */ -static const struct sh_eth_plat_data ether_pdata __initconst = { - .phy = 0x00, /* PD60610 */ - .edmac_endian = EDMAC_LITTLE_ENDIAN, - .phy_interface = PHY_INTERFACE_MODE_MII, - .no_ether_link = 1 -}; - -static const struct resource ether_resources[] __initconst = { - DEFINE_RES_MEM(0xe8203000, 0x800), - DEFINE_RES_MEM(0xe8204800, 0x200), - DEFINE_RES_IRQ(gic_iid(359)), -}; - -static const struct platform_device_info ether_info __initconst = { - .name = "r7s72100-ether", - .id = -1, - .res = ether_resources, - .num_res = ARRAY_SIZE(ether_resources), - .data = ðer_pdata, - .size_data = sizeof(ether_pdata), - .dma_mask = DMA_BIT_MASK(32), -}; - -/* RSPI */ -#define RSPI_RESOURCE(idx, baseaddr, irq) \ -static const struct resource rspi##idx##_resources[] __initconst = { \ - DEFINE_RES_MEM(baseaddr, 0x24), \ - DEFINE_RES_IRQ_NAMED(irq, "error"), \ - DEFINE_RES_IRQ_NAMED(irq + 1, "rx"), \ - DEFINE_RES_IRQ_NAMED(irq + 2, "tx"), \ -} - -RSPI_RESOURCE(0, 0xe800c800, gic_iid(270)); -RSPI_RESOURCE(1, 0xe800d000, gic_iid(273)); -RSPI_RESOURCE(2, 0xe800d800, gic_iid(276)); -RSPI_RESOURCE(3, 0xe800e000, gic_iid(279)); -RSPI_RESOURCE(4, 0xe800e800, gic_iid(282)); - -static const struct rspi_plat_data rspi_pdata __initconst = { - .num_chipselect = 1, -}; - -#define r7s72100_register_rspi(idx) \ - platform_device_register_resndata(NULL, "rspi-rz", idx, \ - rspi##idx##_resources, \ - ARRAY_SIZE(rspi##idx##_resources), \ - &rspi_pdata, sizeof(rspi_pdata)) - -static const struct spi_board_info spi_info[] __initconst = { - { - .modalias = "wm8978", - .max_speed_hz = 5000000, - .bus_num = 4, - .chip_select = 0, - }, -}; - -/* SCIF */ -#define R7S72100_SCIF(index, baseaddr, irq) \ -static const struct plat_sci_port scif##index##_platform_data = { \ - .type = PORT_SCIF, \ - .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \ - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ - .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \ - SCSCR_REIE, \ -}; \ - \ -static struct resource scif##index##_resources[] = { \ - DEFINE_RES_MEM(baseaddr, 0x100), \ - DEFINE_RES_IRQ(irq + 1), \ - DEFINE_RES_IRQ(irq + 2), \ - DEFINE_RES_IRQ(irq + 3), \ - DEFINE_RES_IRQ(irq), \ -} \ - -R7S72100_SCIF(0, 0xe8007000, gic_iid(221)); -R7S72100_SCIF(1, 0xe8007800, gic_iid(225)); -R7S72100_SCIF(2, 0xe8008000, gic_iid(229)); -R7S72100_SCIF(3, 0xe8008800, gic_iid(233)); -R7S72100_SCIF(4, 0xe8009000, gic_iid(237)); -R7S72100_SCIF(5, 0xe8009800, gic_iid(241)); -R7S72100_SCIF(6, 0xe800a000, gic_iid(245)); -R7S72100_SCIF(7, 0xe800a800, gic_iid(249)); - -#define r7s72100_register_scif(index) \ - platform_device_register_resndata(NULL, "sh-sci", index, \ - scif##index##_resources, \ - ARRAY_SIZE(scif##index##_resources), \ - &scif##index##_platform_data, \ - sizeof(scif##index##_platform_data)) - -static void __init genmai_add_standard_devices(void) -{ - r7s72100_clock_init(); - r7s72100_add_dt_devices(); - - platform_device_register_full(ðer_info); - - r7s72100_register_rspi(0); - r7s72100_register_rspi(1); - r7s72100_register_rspi(2); - r7s72100_register_rspi(3); - r7s72100_register_rspi(4); - spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); - - r7s72100_register_scif(0); - r7s72100_register_scif(1); - r7s72100_register_scif(2); - r7s72100_register_scif(3); - r7s72100_register_scif(4); - r7s72100_register_scif(5); - r7s72100_register_scif(6); - r7s72100_register_scif(7); -} - -static const char * const genmai_boards_compat_dt[] __initconst = { - "renesas,genmai", - NULL, -}; - -DT_MACHINE_START(GENMAI_DT, "genmai") - .init_early = shmobile_init_delay, - .init_machine = genmai_add_standard_devices, - .dt_compat = genmai_boards_compat_dt, -MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index 3ff88c1..46aa540 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -41,16 +41,15 @@ .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, }, @@ -88,7 +87,6 @@ * devices until they get moved to DT. */ static const struct clk_name clk_names[] __initconst = { - { "cmt0", "fck", "sh-cmt-48-gen2.0" }, { "du0", "du.0", "rcar-du-r8a7791" }, { "du1", "du.1", "rcar-du-r8a7791" }, { "lvds0", "lvds.0", "rcar-du-r8a7791" }, @@ -97,7 +95,6 @@ static void __init koelsch_add_standard_devices(void) { shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); - r8a7791_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); koelsch_add_du_device();
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index b7d5bc7..7111b5c 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -63,16 +63,15 @@ .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, }, @@ -331,7 +330,6 @@ static struct sh_mobile_sdhi_info sdhi0_info __initdata = { .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, - .tmio_caps2 = MMC_CAP2_NO_MULTI_READ, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, }; @@ -344,7 +342,6 @@ static struct sh_mobile_sdhi_info sdhi1_info __initdata = { .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, - .tmio_caps2 = MMC_CAP2_NO_MULTI_READ, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, }; @@ -357,7 +354,6 @@ static struct sh_mobile_sdhi_info sdhi2_info __initdata = { .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, - .tmio_caps2 = MMC_CAP2_NO_MULTI_READ, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, };
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 5d2621f..d9cdf9a 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -51,8 +51,8 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") .smp = smp_ops(sh73a0_smp_ops), .map_io = sh73a0_map_io, - .init_early = sh73a0_init_delay, - .nr_irqs = NR_IRQS_LEGACY, + .init_early = shmobile_init_delay, .init_machine = kzm_init, + .init_late = shmobile_init_late, .dt_compat = kzm9g_boards_compat_dt, MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index f8bc7f8..77e36fa 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -50,6 +50,7 @@ #include <video/sh_mobile_lcdc.h> #include "common.h" +#include "intc.h" #include "irqs.h" #include "sh73a0.h" @@ -910,7 +911,6 @@ .smp = smp_ops(sh73a0_smp_ops), .map_io = sh73a0_map_io, .init_early = sh73a0_add_early_devices, - .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .init_machine = kzm_init, .init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index 41c808e..bc4b483 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -43,16 +43,15 @@ .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, }, @@ -92,7 +91,6 @@ * devices until they get moved to DT. */ static const struct clk_name clk_names[] __initconst = { - { "cmt0", "fck", "sh-cmt-48-gen2.0" }, { "du0", "du.0", "rcar-du-r8a7790" }, { "du1", "du.1", "rcar-du-r8a7790" }, { "du2", "du.2", "rcar-du-r8a7790" }, @@ -103,7 +101,6 @@ static void __init lager_add_standard_devices(void) { shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); - r8a7790_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); lager_add_du_device();
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index e1d8215..571327b 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c
@@ -99,16 +99,15 @@ .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, }, @@ -630,7 +629,6 @@ static struct sh_mobile_sdhi_info sdhi0_info __initdata = { .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, - .tmio_caps2 = MMC_CAP2_NO_MULTI_READ, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, }; @@ -644,7 +642,6 @@ static struct sh_mobile_sdhi_info sdhi2_info __initdata = { .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD, - .tmio_caps2 = MMC_CAP2_NO_MULTI_READ, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE, };
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 79f448e..ca5d34b 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -63,6 +63,7 @@ #include <asm/mach-types.h> #include "common.h" +#include "intc.h" #include "irqs.h" #include "pm-rmobile.h" #include "sh-gpio.h" @@ -1420,7 +1421,7 @@ #define USCCR1 IOMEM(0xE6058144) static void __init mackerel_init(void) { - struct pm_domain_device domain_devices[] = { + static struct pm_domain_device domain_devices[] __initdata = { { "A4LC", &lcdc_device, }, { "A4LC", &hdmi_lcdc_device, }, { "A4LC", &meram_device, },
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c index 21b3e1c..38d9cdd 100644 --- a/arch/arm/mach-shmobile/board-marzen-reference.c +++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -37,18 +37,8 @@ clocksource_of_init(); } -/* - * This is a really crude hack to provide clkdev support to platform - * devices until they get moved to DT. - */ -static const struct clk_name clk_names[] __initconst = { - { "tmu0", "fck", "sh-tmu.0" }, -}; - static void __init marzen_init(void) { - shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); - r8a7779_add_standard_devices_dt(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */ } @@ -64,8 +54,8 @@ .map_io = r8a7779_map_io, .init_early = shmobile_init_delay, .init_time = marzen_init_timer, - .nr_irqs = NR_IRQS_LEGACY, .init_irq = r8a7779_init_irq_dt, .init_machine = marzen_init, + .init_late = shmobile_init_late, .dt_compat = marzen_boards_compat_dt, MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index e5cf420..ce33d78 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -192,16 +192,15 @@ .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, },
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c deleted file mode 100644 index 3eb2ec4..0000000 --- a/arch/arm/mach-shmobile/clock-r7s72100.c +++ /dev/null
@@ -1,231 +0,0 @@ -/* - * r7a72100 clock framework support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2012 Phil Edworthy - * Copyright (C) 2011 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> - -#include "common.h" -#include "r7s72100.h" - -/* Frequency Control Registers */ -#define FRQCR 0xfcfe0010 -#define FRQCR2 0xfcfe0014 -/* Standby Control Registers */ -#define STBCR3 0xfcfe0420 -#define STBCR4 0xfcfe0424 -#define STBCR7 0xfcfe0430 -#define STBCR9 0xfcfe0438 -#define STBCR10 0xfcfe043c - -#define PLL_RATE 30 - -static struct clk_mapping cpg_mapping = { - .phys = 0xfcfe0000, - .len = 0x1000, -}; - -/* Fixed 32 KHz root clock for RTC */ -static struct clk r_clk = { - .rate = 32768, -}; - -/* - * Default rate for the root input clock, reset this with clk_set_rate() - * from the platform code. - */ -static struct clk extal_clk = { - .rate = 13330000, - .mapping = &cpg_mapping, -}; - -static unsigned long pll_recalc(struct clk *clk) -{ - return clk->parent->rate * PLL_RATE; -} - -static struct sh_clk_ops pll_clk_ops = { - .recalc = pll_recalc, -}; - -static struct clk pll_clk = { - .ops = &pll_clk_ops, - .parent = &extal_clk, - .flags = CLK_ENABLE_ON_INIT, -}; - -static unsigned long bus_recalc(struct clk *clk) -{ - return clk->parent->rate / 3; -} - -static struct sh_clk_ops bus_clk_ops = { - .recalc = bus_recalc, -}; - -static struct clk bus_clk = { - .ops = &bus_clk_ops, - .parent = &pll_clk, - .flags = CLK_ENABLE_ON_INIT, -}; - -static unsigned long peripheral0_recalc(struct clk *clk) -{ - return clk->parent->rate / 12; -} - -static struct sh_clk_ops peripheral0_clk_ops = { - .recalc = peripheral0_recalc, -}; - -static struct clk peripheral0_clk = { - .ops = &peripheral0_clk_ops, - .parent = &pll_clk, - .flags = CLK_ENABLE_ON_INIT, -}; - -static unsigned long peripheral1_recalc(struct clk *clk) -{ - return clk->parent->rate / 6; -} - -static struct sh_clk_ops peripheral1_clk_ops = { - .recalc = peripheral1_recalc, -}; - -static struct clk peripheral1_clk = { - .ops = &peripheral1_clk_ops, - .parent = &pll_clk, - .flags = CLK_ENABLE_ON_INIT, -}; - -struct clk *main_clks[] = { - &r_clk, - &extal_clk, - &pll_clk, - &bus_clk, - &peripheral0_clk, - &peripheral1_clk, -}; - -static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */ -static int multipliers[] = { 1, 2, 1, 1 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = div2, - .nr_divisors = ARRAY_SIZE(div2), - .multipliers = multipliers, - .nr_multipliers = ARRAY_SIZE(multipliers), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, -}; - -enum { DIV4_I, - DIV4_NR }; - -#define DIV4(_reg, _bit, _mask, _flags) \ - SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags) - -/* The mask field specifies the div2 entries that are valid */ -struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT - | CLK_ENABLE_ON_INIT), -}; - -enum { - MSTP107, MSTP106, MSTP105, MSTP104, MSTP103, - MSTP97, MSTP96, MSTP95, MSTP94, - MSTP74, - MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40, - MSTP33, MSTP_NR -}; - -static struct clk mstp_clks[MSTP_NR] = { - [MSTP107] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 7, 0), /* RSPI0 */ - [MSTP106] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 6, 0), /* RSPI1 */ - [MSTP105] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 5, 0), /* RSPI2 */ - [MSTP104] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 4, 0), /* RSPI3 */ - [MSTP103] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 3, 0), /* RSPI4 */ - [MSTP97] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 7, 0), /* RIIC0 */ - [MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */ - [MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */ - [MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */ - [MSTP74] = SH_CLK_MSTP8(&peripheral1_clk, STBCR7, 4, 0), /* Ether */ - [MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */ - [MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */ - [MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */ - [MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */ - [MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */ - [MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */ - [MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */ - [MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */ - [MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */ -}; - -static struct clk_lookup lookups[] = { - /* main clocks */ - CLKDEV_CON_ID("rclk", &r_clk), - CLKDEV_CON_ID("extal", &extal_clk), - CLKDEV_CON_ID("pll_clk", &pll_clk), - CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk), - - /* DIV4 clocks */ - CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]), - - /* MSTP clocks */ - CLKDEV_DEV_ID("rspi-rz.0", &mstp_clks[MSTP107]), - CLKDEV_DEV_ID("rspi-rz.1", &mstp_clks[MSTP106]), - CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]), - CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]), - CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]), - CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]), - - /* ICK */ - CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]), - CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]), - CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]), - CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]), - CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]), - CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]), - CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]), - CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]), - CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP33]), -}; - -void __init r7s72100_clock_init(void) -{ - int k, ret = 0; - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup rza1 clocks\n"); -}
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 9805608..72087c7 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h
@@ -2,8 +2,6 @@ #define __ARCH_MACH_COMMON_H extern void shmobile_earlytimer_init(void); -extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, - unsigned int mult, unsigned int div); extern void shmobile_init_delay(void); struct twd_local_timer; extern void shmobile_setup_console(void);
diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c index 8a24b2b..57fbff0 100644 --- a/arch/arm/mach-shmobile/cpufreq.c +++ b/arch/arm/mach-shmobile/cpufreq.c
@@ -12,6 +12,6 @@ int __init shmobile_cpufreq_init(void) { - platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0); + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); return 0; }
diff --git a/arch/arm/mach-shmobile/dma-register.h b/arch/arm/mach-shmobile/dma-register.h index 97c40bd..52a2f66 100644 --- a/arch/arm/mach-shmobile/dma-register.h +++ b/arch/arm/mach-shmobile/dma-register.h
@@ -52,8 +52,8 @@ ((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\ (((i) & TS_HI_BIT) << TS_HI_SHIFT)) -#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz))) -#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz))) +#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL((xmit_sz))) +#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL((xmit_sz))) /*
diff --git a/arch/arm/mach-shmobile/intc.h b/arch/arm/mach-shmobile/intc.h index a5603c7..40b2ad4 100644 --- a/arch/arm/mach-shmobile/intc.h +++ b/arch/arm/mach-shmobile/intc.h
@@ -287,4 +287,9 @@ p ## _sense_registers, NULL), \ } +/* INTCS */ +#define INTCS_VECT_BASE 0x3400 +#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) +#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) + #endif /* __ASM_MACH_INTC_H */
diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h index 4ff2d2a..3070f6d 100644 --- a/arch/arm/mach-shmobile/irqs.h +++ b/arch/arm/mach-shmobile/irqs.h
@@ -1,18 +1,12 @@ #ifndef __SHMOBILE_IRQS_H #define __SHMOBILE_IRQS_H -#include <linux/sh_intc.h> -#include <mach/irqs.h> +#include "include/mach/irqs.h" /* GIC */ #define gic_spi(nr) ((nr) + 32) #define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */ -/* INTCS */ -#define INTCS_VECT_BASE 0x3400 -#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) -#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) - /* GPIO IRQ */ #define _GPIO_IRQ_BASE 2500 #define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x))
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c index a0d44d5..e3f1464 100644 --- a/arch/arm/mach-shmobile/pm-r8a7740.c +++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -13,12 +13,12 @@ #include "common.h" #include "pm-rmobile.h" -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM) static int r8a7740_pd_a4s_suspend(void) { /* * The A4S domain contains the CPU core and therefore it should - * only be turned off if the CPU is in use. + * only be turned off if the CPU is not in use. */ return -EBUSY; } @@ -34,23 +34,21 @@ static struct rmobile_pm_domain r8a7740_pm_domains[] = { { + .genpd.name = "A4LC", + .bit_shift = 1, + }, { .genpd.name = "A4S", .bit_shift = 10, .gov = &pm_domain_always_on_gov, .no_debug = true, .suspend = r8a7740_pd_a4s_suspend, - }, - { + }, { .genpd.name = "A3SP", .bit_shift = 11, .gov = &pm_domain_always_on_gov, .no_debug = true, .suspend = r8a7740_pd_a3sp_suspend, }, - { - .genpd.name = "A4LC", - .bit_shift = 1, - }, }; void __init r8a7740_init_pm_domains(void) @@ -58,8 +56,7 @@ rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains)); pm_genpd_add_subdomain_names("A4S", "A3SP"); } - -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */ #ifdef CONFIG_SUSPEND static int r8a7740_enter_suspend(suspend_state_t suspend_state)
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index 69f70b7..82fe3d7 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -87,7 +87,6 @@ genpd->dev_ops.stop = pm_clk_suspend; genpd->dev_ops.start = pm_clk_resume; genpd->dev_ops.active_wakeup = pd_active_wakeup; - genpd->dev_irq_safe = true; genpd->power_off = pd_power_down; genpd->power_on = pd_power_up;
diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c index 34b8a56..00022ee 100644 --- a/arch/arm/mach-shmobile/pm-rcar.c +++ b/arch/arm/mach-shmobile/pm-rcar.c
@@ -31,8 +31,6 @@ #define SYSCISR_RETRIES 1000 #define SYSCISR_DELAY_US 1 -#if defined(CONFIG_PM) || defined(CONFIG_SMP) - static void __iomem *rcar_sysc_base; static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */ @@ -137,5 +135,3 @@ return rcar_sysc_base; } - -#endif /* CONFIG_PM || CONFIG_SMP */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index ebdd16e..717e641 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -27,7 +27,6 @@ #define PSTR_RETRIES 100 #define PSTR_DELAY_US 10 -#ifdef CONFIG_PM static int rmobile_pd_power_down(struct generic_pm_domain *genpd) { struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd); @@ -111,7 +110,6 @@ genpd->dev_ops.stop = pm_clk_suspend; genpd->dev_ops.start = pm_clk_resume; genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; - genpd->dev_irq_safe = true; genpd->power_off = rmobile_pd_power_down; genpd->power_on = rmobile_pd_power_up; __rmobile_pd_power_up(rmobile_pd, false); @@ -151,4 +149,3 @@ rmobile_add_device_to_domain_td(data[j].domain_name, data[j].pdev, &latencies); } -#endif /* CONFIG_PM */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h index 690553a..8f66b34 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.h +++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -36,7 +36,7 @@ struct platform_device *pdev; }; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_RMOBILE extern void rmobile_init_domains(struct rmobile_pm_domain domains[], int num); extern void rmobile_add_device_to_domain_td(const char *domain_name, struct platform_device *pdev, @@ -58,6 +58,6 @@ static inline void rmobile_add_devices_to_domains(struct pm_domain_device d[], int size) {} -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_RMOBILE */ #endif /* PM_RMOBILE_H */
diff --git a/arch/arm/mach-shmobile/r7s72100.h b/arch/arm/mach-shmobile/r7s72100.h deleted file mode 100644 index efb723c..0000000 --- a/arch/arm/mach-shmobile/r7s72100.h +++ /dev/null
@@ -1,7 +0,0 @@ -#ifndef __ASM_R7S72100_H__ -#define __ASM_R7S72100_H__ - -void r7s72100_add_dt_devices(void); -void r7s72100_clock_init(void); - -#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h index ce8bdd1..5fafd6f 100644 --- a/arch/arm/mach-shmobile/r8a73a4.h +++ b/arch/arm/mach-shmobile/r8a73a4.h
@@ -14,6 +14,5 @@ void r8a73a4_add_dt_devices(void); void r8a73a4_clock_init(void); void r8a73a4_pinmux_init(void); -void r8a73a4_init_early(void); #endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h index 1d1a5fd..f369b4b 100644 --- a/arch/arm/mach-shmobile/r8a7740.h +++ b/arch/arm/mach-shmobile/r8a7740.h
@@ -49,15 +49,14 @@ extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); extern void r8a7740_add_standard_devices(void); -extern void r8a7740_add_standard_devices_dt(void); extern void r8a7740_clock_init(u8 md_ck); extern void r8a7740_pinmux_init(void); extern void r8a7740_pm_init(void); -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM) extern void __init r8a7740_init_pm_domains(void); #else static inline void r8a7740_init_pm_domains(void) {} -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */ #endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h index 5415c71..19f9704 100644 --- a/arch/arm/mach-shmobile/r8a7779.h +++ b/arch/arm/mach-shmobile/r8a7779.h
@@ -17,7 +17,6 @@ extern void r8a7779_earlytimer_init(void); extern void r8a7779_add_early_devices(void); extern void r8a7779_add_standard_devices(void); -extern void r8a7779_add_standard_devices_dt(void); extern void r8a7779_init_late(void); extern u32 r8a7779_read_mode_pins(void); extern void r8a7779_clock_init(void);
diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h index 459827f..388f051 100644 --- a/arch/arm/mach-shmobile/r8a7790.h +++ b/arch/arm/mach-shmobile/r8a7790.h
@@ -27,7 +27,6 @@ }; void r8a7790_add_standard_devices(void); -void r8a7790_add_dt_devices(void); void r8a7790_clock_init(void); void r8a7790_pinmux_init(void); void r8a7790_pm_init(void);
diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h index 86eae7b..c1bf7ab 100644 --- a/arch/arm/mach-shmobile/r8a7791.h +++ b/arch/arm/mach-shmobile/r8a7791.h
@@ -2,7 +2,6 @@ #define __ASM_R8A7791_H__ void r8a7791_add_standard_devices(void); -void r8a7791_add_dt_devices(void); void r8a7791_clock_init(void); void r8a7791_pinmux_init(void); void r8a7791_pm_init(void);
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c index f3b3b14..4122104 100644 --- a/arch/arm/mach-shmobile/setup-r7s72100.c +++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -18,34 +18,12 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/irq.h> #include <linux/kernel.h> -#include <linux/of_platform.h> -#include <linux/sh_timer.h> #include <asm/mach/arch.h> #include "common.h" -#include "irqs.h" -#include "r7s72100.h" -static struct resource mtu2_resources[] __initdata = { - DEFINE_RES_MEM(0xfcff0000, 0x400), - DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"), -}; - -#define r7s72100_register_mtu2() \ - platform_device_register_resndata(NULL, "sh-mtu2", \ - -1, mtu2_resources, \ - ARRAY_SIZE(mtu2_resources), \ - NULL, 0) - -void __init r7s72100_add_dt_devices(void) -{ - r7s72100_register_mtu2(); -} - -#ifdef CONFIG_USE_OF static const char *r7s72100_boards_compat_dt[] __initdata = { "renesas,r7s72100", NULL, @@ -53,6 +31,6 @@ DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)") .init_early = shmobile_init_delay, + .init_late = shmobile_init_late, .dt_compat = r7s72100_boards_compat_dt, MACHINE_END -#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 6683072..53f40b7 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -295,13 +295,6 @@ r8a73a4_register_dmac(); } -void __init r8a73a4_init_early(void) -{ -#ifndef CONFIG_ARM_ARCH_TIMER - shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */ -#endif -} - #ifdef CONFIG_USE_OF static const char *r8a73a4_boards_compat_dt[] __initdata = { @@ -310,7 +303,8 @@ }; DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") - .init_early = r8a73a4_init_early, + .init_early = shmobile_init_delay, + .init_late = shmobile_init_late, .dt_compat = r8a73a4_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 3d5eaca..8894e1b 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -36,6 +36,7 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include <asm/hardware/cache-l2x0.h> #include "common.h" #include "dma-register.h" @@ -311,10 +312,6 @@ .num_resources = ARRAY_SIZE(ipmmu_resources), }; -static struct platform_device *r8a7740_devices_dt[] __initdata = { - &cmt1_device, -}; - static struct platform_device *r8a7740_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -331,6 +328,7 @@ &irqpin3_device, &tmu0_device, &ipmmu_device, + &cmt1_device, }; /* DMA */ @@ -747,6 +745,19 @@ void __init r8a7740_add_standard_devices(void) { + static struct pm_domain_device domain_devices[] __initdata = { + { "A3SP", &scif0_device }, + { "A3SP", &scif1_device }, + { "A3SP", &scif2_device }, + { "A3SP", &scif3_device }, + { "A3SP", &scif4_device }, + { "A3SP", &scif5_device }, + { "A3SP", &scif6_device }, + { "A3SP", &scif7_device }, + { "A3SP", &scif8_device }, + { "A3SP", &i2c1_device }, + }; + /* I2C work-around */ r8a7740_i2c_workaround(&i2c0_device); r8a7740_i2c_workaround(&i2c1_device); @@ -756,31 +767,18 @@ /* add devices */ platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); - platform_add_devices(r8a7740_devices_dt, - ARRAY_SIZE(r8a7740_devices_dt)); platform_add_devices(r8a7740_late_devices, ARRAY_SIZE(r8a7740_late_devices)); /* add devices to PM domain */ - - rmobile_add_device_to_domain("A3SP", &scif0_device); - rmobile_add_device_to_domain("A3SP", &scif1_device); - rmobile_add_device_to_domain("A3SP", &scif2_device); - rmobile_add_device_to_domain("A3SP", &scif3_device); - rmobile_add_device_to_domain("A3SP", &scif4_device); - rmobile_add_device_to_domain("A3SP", &scif5_device); - rmobile_add_device_to_domain("A3SP", &scif6_device); - rmobile_add_device_to_domain("A3SP", &scif7_device); - rmobile_add_device_to_domain("A3SP", &scif8_device); - rmobile_add_device_to_domain("A3SP", &i2c1_device); + rmobile_add_devices_to_domains(domain_devices, + ARRAY_SIZE(domain_devices)); } void __init r8a7740_add_early_devices(void) { early_platform_add_devices(r8a7740_early_devices, ARRAY_SIZE(r8a7740_early_devices)); - early_platform_add_devices(r8a7740_devices_dt, - ARRAY_SIZE(r8a7740_devices_dt)); /* setup early console here as well */ shmobile_setup_console(); @@ -788,13 +786,6 @@ #ifdef CONFIG_USE_OF -void __init r8a7740_add_standard_devices_dt(void) -{ - platform_add_devices(r8a7740_devices_dt, - ARRAY_SIZE(r8a7740_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - void __init r8a7740_init_irq_of(void) { void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10); @@ -827,8 +818,20 @@ static void __init r8a7740_generic_init(void) { - r8a7740_clock_init(0); - r8a7740_add_standard_devices_dt(); + r8a7740_meram_workaround(); + +#ifdef CONFIG_CACHE_L2X0 + /* Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); +#endif + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +#define RESCNT2 IOMEM(0xe6188020) +static void r8a7740_restart(enum reboot_mode mode, const char *cmd) +{ + /* Do soft power on reset */ + writel(1 << 31, RESCNT2); } static const char *r8a7740_boards_compat_dt[] __initdata = { @@ -843,6 +846,7 @@ .init_machine = r8a7740_generic_init, .init_late = shmobile_init_late, .dt_compat = r8a7740_boards_compat_dt, + .restart = r8a7740_restart, MACHINE_END #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index f00a488..85fe016 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -520,6 +520,7 @@ void __init r8a7778_init_late(void) { + shmobile_init_late(); platform_device_register_full(&ehci_info); platform_device_register_full(&ohci_info); } @@ -573,7 +574,7 @@ void __init r8a7778_init_delay(void) { - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ + shmobile_init_delay(); } #ifdef CONFIG_USE_OF @@ -609,8 +610,8 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = r8a7778_init_delay, .init_irq = r8a7778_init_irq_dt, + .init_late = shmobile_init_late, .dt_compat = r8a7778_compat_dt, - .init_late = r8a7778_init_late, MACHINE_END #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 236c1be..136078a 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -641,7 +641,7 @@ sizeof(dma_platform_data)); } -static struct platform_device *r8a7779_devices_dt[] __initdata = { +static struct platform_device *r8a7779_early_devices[] __initdata = { &tmu0_device, }; @@ -669,8 +669,8 @@ r8a7779_init_pm_domains(); - platform_add_devices(r8a7779_devices_dt, - ARRAY_SIZE(r8a7779_devices_dt)); + platform_add_devices(r8a7779_early_devices, + ARRAY_SIZE(r8a7779_early_devices)); platform_add_devices(r8a7779_standard_devices, ARRAY_SIZE(r8a7779_standard_devices)); r8a7779_register_hpb_dmae(); @@ -678,8 +678,8 @@ void __init r8a7779_add_early_devices(void) { - early_platform_add_devices(r8a7779_devices_dt, - ARRAY_SIZE(r8a7779_devices_dt)); + early_platform_add_devices(r8a7779_early_devices, + ARRAY_SIZE(r8a7779_early_devices)); /* Early serial console setup is not included here due to * memory map collisions. The SCIF serial ports in r8a7779 @@ -739,12 +739,6 @@ __raw_writel(0x003fee3f, INT2SMSKCR4); } -void __init r8a7779_add_standard_devices_dt(void) -{ - platform_add_devices(r8a7779_devices_dt, - ARRAY_SIZE(r8a7779_devices_dt)); -} - #define MODEMR 0xffcc0020 u32 __init r8a7779_read_mode_pins(void) @@ -771,10 +765,8 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") .map_io = r8a7779_map_io, .init_early = shmobile_init_delay, - .nr_irqs = NR_IRQS_LEGACY, .init_irq = r8a7779_init_irq_dt, - .init_machine = r8a7779_add_standard_devices_dt, - .init_late = r8a7779_init_late, + .init_late = shmobile_init_late, .dt_compat = r8a7779_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 0c12b01..877fdeb 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -282,11 +282,6 @@ &cmt##idx##_platform_data, \ sizeof(struct sh_timer_config)) -void __init r8a7790_add_dt_devices(void) -{ - r8a7790_register_cmt(0); -} - void __init r8a7790_add_standard_devices(void) { r8a7790_register_scif(0); @@ -299,7 +294,7 @@ r8a7790_register_scif(7); r8a7790_register_scif(8); r8a7790_register_scif(9); - r8a7790_add_dt_devices(); + r8a7790_register_cmt(0); r8a7790_register_irqc(0); r8a7790_register_thermal(); r8a7790_register_i2c(0);
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index d47d8b1..35d7863 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -182,11 +182,6 @@ thermal_resources, \ ARRAY_SIZE(thermal_resources)) -void __init r8a7791_add_dt_devices(void) -{ - r8a7791_register_cmt(0); -} - void __init r8a7791_add_standard_devices(void) { r8a7791_register_scif(0); @@ -204,7 +199,7 @@ r8a7791_register_scif(12); r8a7791_register_scif(13); r8a7791_register_scif(14); - r8a7791_add_dt_devices(); + r8a7791_register_cmt(0); r8a7791_register_irqc(0); r8a7791_register_thermal(); }
diff --git a/arch/arm/mach-shmobile/setup-r8a7794.c b/arch/arm/mach-shmobile/setup-r8a7794.c new file mode 100644 index 0000000..d2b0930 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-r8a7794.c
@@ -0,0 +1,33 @@ +/* + * r8a7794 processor support + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2014 Ulrich Hecht + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/of_platform.h> +#include "common.h" +#include "rcar-gen2.h" +#include <asm/mach/arch.h> + +static const char * const r8a7794_boards_compat_dt[] __initconst = { + "renesas,r8a7794", + NULL, +}; + +DT_MACHINE_START(R8A7794_DT, "Generic R8A7794 (Flattened Device Tree)") + .init_early = shmobile_init_delay, + .init_late = shmobile_init_late, + .init_time = rcar_gen2_timer_init, + .reserve = rcar_gen2_reserve, + .dt_compat = r8a7794_boards_compat_dt, +MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 9cdfcdf..d646c8d 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -41,6 +41,7 @@ #include "common.h" #include "dma-register.h" +#include "intc.h" #include "irqs.h" #include "pm-rmobile.h" #include "sh7372.h" @@ -927,7 +928,7 @@ void __init sh7372_add_standard_devices(void) { - struct pm_domain_device domain_devices[] = { + static struct pm_domain_device domain_devices[] __initdata = { { "A3RV", &vpu_device, }, { "A4MP", &spu0_device, }, { "A4MP", &spu1_device, }, @@ -984,7 +985,7 @@ void __init sh7372_add_early_devices_dt(void) { - shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */ + shmobile_init_delay(); sh7372_add_early_devices(); } @@ -1008,7 +1009,6 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)") .map_io = sh7372_map_io, .init_early = sh7372_add_early_devices_dt, - .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh7372_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = sh7372_add_standard_devices_dt,
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 2c802ae..b7bd8e5 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -40,6 +40,7 @@ #include "common.h" #include "dma-register.h" +#include "intc.h" #include "irqs.h" #include "sh73a0.h" @@ -696,10 +697,6 @@ }, }; -static struct platform_device *sh73a0_devices_dt[] __initdata = { - &cmt1_device, -}; - static struct platform_device *sh73a0_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -712,6 +709,7 @@ &scif8_device, &tmu0_device, &ipmmu_device, + &cmt1_device, }; static struct platform_device *sh73a0_late_devices[] __initdata = { @@ -736,8 +734,6 @@ /* Clear software reset bit on SY-DMAC module */ __raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2); - platform_add_devices(sh73a0_devices_dt, - ARRAY_SIZE(sh73a0_devices_dt)); platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); platform_add_devices(sh73a0_late_devices, @@ -746,7 +742,7 @@ void __init sh73a0_init_delay(void) { - shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */ + shmobile_init_delay(); } /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ @@ -762,8 +758,6 @@ void __init sh73a0_add_early_devices(void) { - early_platform_add_devices(sh73a0_devices_dt, - ARRAY_SIZE(sh73a0_devices_dt)); early_platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); @@ -775,17 +769,10 @@ void __init sh73a0_add_standard_devices_dt(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; - /* clocks are setup late during boot in the case of DT */ sh73a0_clock_init(); - platform_add_devices(sh73a0_devices_dt, - ARRAY_SIZE(sh73a0_devices_dt)); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - /* Instantiate cpufreq-cpu0 */ - platform_device_register_full(&devinfo); } static const char *sh73a0_boards_compat_dt[] __initdata = { @@ -797,8 +784,8 @@ .smp = smp_ops(sh73a0_smp_ops), .map_io = sh73a0_map_io, .init_early = sh73a0_init_delay, - .nr_irqs = NR_IRQS_LEGACY, .init_machine = sh73a0_add_standard_devices_dt, + .init_late = shmobile_init_late, .dt_compat = sh73a0_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 942efdc..87c6be1 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c
@@ -23,8 +23,8 @@ #include <linux/delay.h> #include <linux/of_address.h> -void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, - unsigned int mult, unsigned int div) +static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, + unsigned int mult, unsigned int div) { /* calculate a worst-case loops-per-jiffy value * based on maximum cpu core hz setting and the @@ -40,27 +40,10 @@ preset_lpj = max_cpu_core_hz / value; } -void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, - unsigned int mult, unsigned int div) -{ - /* calculate a worst-case loops-per-jiffy value - * based on maximum cpu core mhz setting and the - * __delay() implementation in arch/arm/lib/delay.S - * - * this will result in a longer delay than expected - * when the cpu core runs on lower frequencies. - */ - - unsigned int value = (1000000 * mult) / (HZ * div); - - if (!preset_lpj) - preset_lpj = max_cpu_core_mhz * value; -} - void __init shmobile_init_delay(void) { struct device_node *np, *cpus; - bool is_a8_a9 = false; + bool is_a7_a8_a9 = false; bool is_a15 = false; u32 max_freq = 0; @@ -74,9 +57,10 @@ if (!of_property_read_u32(np, "clock-frequency", &freq)) max_freq = max(max_freq, freq); - if (of_device_is_compatible(np, "arm,cortex-a8") || + if (of_device_is_compatible(np, "arm,cortex-a7") || + of_device_is_compatible(np, "arm,cortex-a8") || of_device_is_compatible(np, "arm,cortex-a9")) - is_a8_a9 = true; + is_a7_a8_a9 = true; else if (of_device_is_compatible(np, "arm,cortex-a15")) is_a15 = true; } @@ -86,7 +70,7 @@ if (!max_freq) return; - if (is_a8_a9) + if (is_a7_a8_a9) shmobile_setup_delay_hz(max_freq, 1, 3); else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) shmobile_setup_delay_hz(max_freq, 2, 4);
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 572b8f7..60c443d 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h
@@ -40,7 +40,7 @@ extern struct smp_operations socfpga_smp_ops; extern char secondary_trampoline, secondary_trampoline_end; -extern unsigned long cpu1start_addr; +extern unsigned long socfpga_cpu1start_addr; #define SOCFPGA_SCU_VIRT_BASE 0xfffec000
diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index 95c115d..f65ea0a 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S
@@ -9,21 +9,26 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/memory.h> .arch armv7-a ENTRY(secondary_trampoline) - movw r2, #:lower16:cpu1start_addr - movt r2, #:upper16:cpu1start_addr + /* CPU1 will always fetch from 0x0 when it is brought out of reset. + * Thus, we can just subtract the PAGE_OFFSET to get the physical + * address of &cpu1start_addr. This would not work for platforms + * where the physical memory does not start at 0x0. + */ + adr r0, 1f + ldmia r0, {r1, r2} + sub r2, r2, #PAGE_OFFSET + ldr r3, [r2] + ldr r4, [r3] + bx r4 - /* The socfpga VT cannot handle a 0xC0000000 page offset when loading - the cpu1start_addr, we bit clear it. Tested on HW and VT. */ - bic r2, r2, #0x40000000 - - ldr r0, [r2] - ldr r1, [r0] - bx r1 - + .align +1: .long . + .long socfpga_cpu1start_addr ENTRY(secondary_trampoline_end) ENTRY(socfpga_secondary_startup)
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 5356a72..16ca97b 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c
@@ -33,11 +33,11 @@ { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; - if (cpu1start_addr) { + if (socfpga_cpu1start_addr) { memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); __raw_writel(virt_to_phys(socfpga_secondary_startup), - (sys_manager_base_addr + (cpu1start_addr & 0x000000ff))); + (sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff))); flush_cache_all(); smp_wmb();
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index adbf383..383d61e 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c
@@ -29,7 +29,7 @@ void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE)); void __iomem *sys_manager_base_addr; void __iomem *rst_manager_base_addr; -unsigned long cpu1start_addr; +unsigned long socfpga_cpu1start_addr; static struct map_desc scu_io_desc __initdata = { .virtual = SOCFPGA_SCU_VIRT_BASE, @@ -70,7 +70,7 @@ np = of_find_compatible_node(NULL, NULL, "altr,sys-mgr"); if (of_property_read_u32(np, "cpu1-start-addr", - (u32 *) &cpu1start_addr)) + (u32 *) &socfpga_cpu1start_addr)) pr_err("SMP: Need cpu1-start-addr in device tree.\n"); sys_manager_base_addr = of_iomap(np, 0);
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 6fd4dc8..b6f4bda2 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig
@@ -4,7 +4,6 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 - default PLAT_SPEAR_SINGLE select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO @@ -13,7 +12,7 @@ config ARCH_SPEAR13XX bool "ST SPEAr13xx" - depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V7 select ARM_GIC select GPIO_SPEAR_SPICS select HAVE_ARM_SCU if SMP @@ -44,7 +43,7 @@ config ARCH_SPEAR3XX bool "ST SPEAr3xx" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC select PINCTRL @@ -75,7 +74,7 @@ config ARCH_SPEAR6XX bool "ST SPEAr6XX" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC help @@ -88,7 +87,7 @@ Supports ST SPEAr600 boards configured via the device-tree config ARCH_SPEAR_AUTO - def_bool PLAT_SPEAR_SINGLE + bool depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX select ARCH_SPEAR3XX
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 42d4753..d7598ae 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c
@@ -12,81 +12,9 @@ #include <linux/clk-provider.h> #include <linux/clocksource.h> -#include <linux/delay.h> -#include <linux/kernel.h> #include <linux/init.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/io.h> -#include <linux/reboot.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/system_misc.h> - -#define SUN4I_WATCHDOG_CTRL_REG 0x00 -#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0) -#define SUN4I_WATCHDOG_MODE_REG 0x04 -#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0) -#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1) - -#define SUN6I_WATCHDOG1_IRQ_REG 0x00 -#define SUN6I_WATCHDOG1_CTRL_REG 0x10 -#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 -#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) -#define SUN6I_WATCHDOG1_MODE_REG 0x18 -#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) - -static void __iomem *wdt_base; - -static void sun4i_restart(enum reboot_mode mode, const char *cmd) -{ - if (!wdt_base) - return; - - /* Enable timer and set reset bit in the watchdog */ - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - - /* - * Restart the watchdog. The default (and lowest) interval - * value for the watchdog is 0.5s. - */ - writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); - - while (1) { - mdelay(5); - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - } -} - -static struct of_device_id sunxi_restart_ids[] = { - { .compatible = "allwinner,sun4i-a10-wdt" }, - { /*sentinel*/ } -}; - -static void sunxi_setup_restart(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, sunxi_restart_ids); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_base = of_iomap(np, 0); - WARN(!wdt_base, "failed to map watchdog base address"); -} - -static void __init sunxi_dt_init(void) -{ - sunxi_setup_restart(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", @@ -96,9 +24,7 @@ }; DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") - .init_machine = sunxi_dt_init, .dt_compat = sunxi_board_dt_compat, - .restart = sun4i_restart, MACHINE_END static const char * const sun6i_board_dt_compat[] = { @@ -126,9 +52,7 @@ }; DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") - .init_machine = sunxi_dt_init, .dt_compat = sun7i_board_dt_compat, - .restart = sun4i_restart, MACHINE_END static const char * const sun8i_board_dt_compat[] = {
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index ec55d1d..475e783 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c
@@ -22,11 +22,12 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <soc/tegra/fuse.h> #include "flowctrl.h" -#include "iomap.h" static u8 flowctrl_offset_halt_cpu[] = { FLOW_CTRL_HALT_CPU0_EVENTS, @@ -42,23 +43,22 @@ FLOW_CTRL_CPU1_CSR + 16, }; +static void __iomem *tegra_flowctrl_base; + static void flowctrl_update(u8 offset, u32 value) { - void __iomem *addr = IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + offset; - - writel(value, addr); + writel(value, tegra_flowctrl_base + offset); /* ensure the update has reached the flow controller */ wmb(); - readl_relaxed(addr); + readl_relaxed(tegra_flowctrl_base + offset); } u32 flowctrl_read_cpu_csr(unsigned int cpuid) { u8 offset = flowctrl_offset_cpu_csr[cpuid]; - void __iomem *addr = IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + offset; - return readl(addr); + return readl(tegra_flowctrl_base + offset); } void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value) @@ -139,3 +139,33 @@ reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event */ flowctrl_write_cpu_csr(cpuid, reg); } + +static const struct of_device_id matches[] __initconst = { + { .compatible = "nvidia,tegra124-flowctrl" }, + { .compatible = "nvidia,tegra114-flowctrl" }, + { .compatible = "nvidia,tegra30-flowctrl" }, + { .compatible = "nvidia,tegra20-flowctrl" }, + { } +}; + +void __init tegra_flowctrl_init(void) +{ + /* hardcoded fallback if device tree node is missing */ + unsigned long base = 0x60007000; + unsigned long size = SZ_4K; + struct device_node *np; + + np = of_find_matching_node(NULL, matches); + if (np) { + struct resource res; + + if (of_address_to_resource(np, 0, &res) == 0) { + size = resource_size(&res); + base = res.start; + } + + of_node_put(np); + } + + tegra_flowctrl_base = ioremap_nocache(base, size); +}
diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index c89aac6..73a9c50 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h
@@ -59,6 +59,8 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid); void flowctrl_cpu_suspend_exit(unsigned int cpuid); + +void tegra_flowctrl_init(void); #endif #endif
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 5ef5173..ef016af 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c
@@ -48,6 +48,7 @@ #include "board.h" #include "common.h" #include "cpuidle.h" +#include "flowctrl.h" #include "iomap.h" #include "irq.h" #include "pm.h" @@ -74,6 +75,7 @@ { of_register_trusted_foundations(); tegra_cpu_reset_handler_init(); + tegra_flowctrl_init(); } static void __init tegra_dt_init_irq(void)
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 3ec74ac..87d37de 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile
@@ -3,9 +3,6 @@ # obj-y := core.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 2da7be3..3bc0dc9 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c
@@ -69,7 +69,7 @@ { local_irq_disable(); writew(5, pmc_base + VT8500_HCR_REG); - asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0)); + asm("mcr p15, 0, %0, c7, c0, 4" : : "r" (0)); } static void __init vt8500_init(void)
diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index 1b25d92..c85fb3f 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile
@@ -3,8 +3,7 @@ # # Common support -obj-y := common.o slcr.o +obj-y := common.o slcr.o pm.o CFLAGS_REMOVE_hotplug.o =-march=armv6k CFLAGS_hotplug.o =-Wa,-march=armv7-a -mcpu=cortex-a9 -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 31a6fa4..26f92c2 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c
@@ -98,13 +98,19 @@ return revision; } +static void __init zynq_init_late(void) +{ + zynq_core_pm_init(); + zynq_pm_late_init(); +} + /** * zynq_init_machine - System specific initialization, intended to be * called from board specific initialization. */ static void __init zynq_init_machine(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; struct soc_device_attribute *soc_dev_attr; struct soc_device *soc_dev; struct device *parent = NULL; @@ -198,12 +204,13 @@ DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") /* 64KB way size, 8-way associativity, parity disabled */ - .l2c_aux_val = 0x02000000, - .l2c_aux_mask = 0xf0ffffff, + .l2c_aux_val = 0x00000000, + .l2c_aux_mask = 0xffffffff, .smp = smp_ops(zynq_smp_ops), .map_io = zynq_map_io, .init_irq = zynq_irq_init, .init_machine = zynq_init_machine, + .init_late = zynq_init_late, .init_time = zynq_timer_init, .dt_compat = zynq_dt_match, .reserve = zynq_memory_init,
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index f652f0a..2bc7127 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h
@@ -24,6 +24,8 @@ extern void zynq_slcr_system_reset(void); extern void zynq_slcr_cpu_stop(int cpu); extern void zynq_slcr_cpu_start(int cpu); +extern bool zynq_slcr_cpu_state_read(int cpu); +extern void zynq_slcr_cpu_state_write(int cpu, bool die); extern u32 zynq_slcr_get_device_id(void); #ifdef CONFIG_SMP @@ -37,7 +39,17 @@ extern void __iomem *zynq_scu_base; -/* Hotplug */ -extern void zynq_platform_cpu_die(unsigned int cpu); +void zynq_pm_late_init(void); + +static inline void zynq_core_pm_init(void) +{ + /* A9 clock gating */ + asm volatile ("mrc p15, 0, r12, c15, c0, 0\n" + "orr r12, r12, #1\n" + "mcr p15, 0, r12, c15, c0, 0\n" + : /* no outputs */ + : /* no inputs */ + : "r12"); +} #endif
diff --git a/arch/arm/mach-zynq/hotplug.c b/arch/arm/mach-zynq/hotplug.c index 5052c70..b685c89 100644 --- a/arch/arm/mach-zynq/hotplug.c +++ b/arch/arm/mach-zynq/hotplug.c
@@ -10,50 +10,5 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> +#include <asm/proc-fns.h> -#include <asm/cacheflush.h> -#include <asm/cp15.h> -#include "common.h" - -static inline void zynq_cpu_enter_lowpower(void) -{ - unsigned int v; - - flush_cache_all(); - asm volatile( - " mcr p15, 0, %1, c7, c5, 0\n" - " dsb\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, #0x40\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C) - : "cc"); -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void zynq_platform_cpu_die(unsigned int cpu) -{ - zynq_cpu_enter_lowpower(); - - /* - * there is no power-control hardware on this platform, so all - * we can do is put the core into WFI; this is safe as the calling - * code will have already disabled interrupts - */ - for (;;) - cpu_do_idle(); -}
diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c index abc82ef..52d768f 100644 --- a/arch/arm/mach-zynq/platsmp.c +++ b/arch/arm/mach-zynq/platsmp.c
@@ -112,20 +112,59 @@ scu_enable(zynq_scu_base); } +/** + * zynq_secondary_init - Initialize secondary CPU cores + * @cpu: CPU that is initialized + * + * This function is in the hotplug path. Don't move it into the + * init section!! + */ +static void zynq_secondary_init(unsigned int cpu) +{ + zynq_core_pm_init(); +} + #ifdef CONFIG_HOTPLUG_CPU static int zynq_cpu_kill(unsigned cpu) { + unsigned long timeout = jiffies + msecs_to_jiffies(50); + + while (zynq_slcr_cpu_state_read(cpu)) + if (time_after(jiffies, timeout)) + return 0; + zynq_slcr_cpu_stop(cpu); return 1; } + +/** + * zynq_cpu_die - Let a CPU core die + * @cpu: Dying CPU + * + * Platform-specific code to shutdown a CPU. + * Called with IRQs disabled on the dying CPU. + */ +static void zynq_cpu_die(unsigned int cpu) +{ + zynq_slcr_cpu_state_write(cpu, true); + + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) + cpu_do_idle(); +} #endif struct smp_operations zynq_smp_ops __initdata = { .smp_init_cpus = zynq_smp_init_cpus, .smp_prepare_cpus = zynq_smp_prepare_cpus, .smp_boot_secondary = zynq_boot_secondary, + .smp_secondary_init = zynq_secondary_init, #ifdef CONFIG_HOTPLUG_CPU - .cpu_die = zynq_platform_cpu_die, + .cpu_die = zynq_cpu_die, .cpu_kill = zynq_cpu_kill, #endif };
diff --git a/arch/arm/mach-zynq/pm.c b/arch/arm/mach-zynq/pm.c new file mode 100644 index 0000000..911fcf8 --- /dev/null +++ b/arch/arm/mach-zynq/pm.c
@@ -0,0 +1,83 @@ +/* + * Zynq power management + * + * Copyright (C) 2012 - 2014 Xilinx + * + * Sören Brinkmann <soren.brinkmann@xilinx.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include "common.h" + +/* register offsets */ +#define DDRC_CTRL_REG1_OFFS 0x60 +#define DDRC_DRAM_PARAM_REG3_OFFS 0x20 + +/* bitfields */ +#define DDRC_CLOCKSTOP_MASK BIT(23) +#define DDRC_SELFREFRESH_MASK BIT(12) + +static void __iomem *ddrc_base; + +/** + * zynq_pm_ioremap() - Create IO mappings + * @comp: DT compatible string + * Return: Pointer to the mapped memory or NULL. + * + * Remap the memory region for a compatible DT node. + */ +static void __iomem *zynq_pm_ioremap(const char *comp) +{ + struct device_node *np; + void __iomem *base = NULL; + + np = of_find_compatible_node(NULL, NULL, comp); + if (np) { + base = of_iomap(np, 0); + of_node_put(np); + } else { + pr_warn("%s: no compatible node found for '%s'\n", __func__, + comp); + } + + return base; +} + +/** + * zynq_pm_late_init() - Power management init + * + * Initialization of power management related featurs and infrastructure. + */ +void __init zynq_pm_late_init(void) +{ + u32 reg; + + ddrc_base = zynq_pm_ioremap("xlnx,zynq-ddrc-a05"); + if (!ddrc_base) { + pr_warn("%s: Unable to map DDRC IO memory.\n", __func__); + } else { + /* + * Enable DDRC clock stop feature. The HW takes care of + * entering/exiting the correct mode depending + * on activity state. + */ + reg = readl(ddrc_base + DDRC_DRAM_PARAM_REG3_OFFS); + reg |= DDRC_CLOCKSTOP_MASK; + writel(reg, ddrc_base + DDRC_DRAM_PARAM_REG3_OFFS); + } +}
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index c43a2d1..d4cb50c 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c
@@ -138,6 +138,8 @@ zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET); reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu); zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET); + + zynq_slcr_cpu_state_write(cpu, false); } /** @@ -154,8 +156,47 @@ } /** - * zynq_slcr_init - Regular slcr driver init + * zynq_slcr_cpu_state - Read/write cpu state + * @cpu: cpu number * + * SLCR_REBOOT_STATUS save upper 2 bits (31/30 cpu states for cpu0 and cpu1) + * 0 means cpu is running, 1 cpu is going to die. + * + * Return: true if cpu is running, false if cpu is going to die + */ +bool zynq_slcr_cpu_state_read(int cpu) +{ + u32 state; + + state = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET); + state &= 1 << (31 - cpu); + + return !state; +} + +/** + * zynq_slcr_cpu_state - Read/write cpu state + * @cpu: cpu number + * @die: cpu state - true if cpu is going to die + * + * SLCR_REBOOT_STATUS save upper 2 bits (31/30 cpu states for cpu0 and cpu1) + * 0 means cpu is running, 1 cpu is going to die. + */ +void zynq_slcr_cpu_state_write(int cpu, bool die) +{ + u32 state, mask; + + state = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET); + mask = 1 << (31 - cpu); + if (die) + state |= mask; + else + state &= ~mask; + writel(state, zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET); +} + +/** + * zynq_slcr_init - Regular slcr driver init * Return: 0 on success, negative errno otherwise. * * Called early during boot from platform code to remap SLCR area.
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 0c1ab49..83792f4 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c
@@ -41,6 +41,7 @@ * This code is not portable to processors with late data abort handling. */ #define CODING_BITS(i) (i & 0x0e000000) +#define COND_BITS(i) (i & 0xf0000000) #define LDST_I_BIT(i) (i & (1 << 26)) /* Immediate constant */ #define LDST_P_BIT(i) (i & (1 << 24)) /* Preindex */ @@ -821,6 +822,8 @@ break; case 0x04000000: /* ldr or str immediate */ + if (COND_BITS(instr) == 0xf0000000) /* NEON VLDn, VSTn */ + goto bad; offset.un = OFFSET_BITS(instr); handler = do_alignment_ldrstr; break;
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 5f2c988..55f9d6e 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c
@@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/spinlock.h> +#include <linux/log2.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> @@ -945,6 +946,98 @@ * pass it though the device tree */ static u32 cache_id_part_number_from_dt; +/** + * l2x0_cache_size_of_parse() - read cache size parameters from DT + * @np: the device tree node for the l2 cache + * @aux_val: pointer to machine-supplied auxilary register value, to + * be augmented by the call (bits to be set to 1) + * @aux_mask: pointer to machine-supplied auxilary register mask, to + * be augmented by the call (bits to be set to 0) + * @associativity: variable to return the calculated associativity in + * @max_way_size: the maximum size in bytes for the cache ways + */ +static void __init l2x0_cache_size_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask, + u32 *associativity, + u32 max_way_size) +{ + u32 mask = 0, val = 0; + u32 cache_size = 0, sets = 0; + u32 way_size_bits = 1; + u32 way_size = 0; + u32 block_size = 0; + u32 line_size = 0; + + of_property_read_u32(np, "cache-size", &cache_size); + of_property_read_u32(np, "cache-sets", &sets); + of_property_read_u32(np, "cache-block-size", &block_size); + of_property_read_u32(np, "cache-line-size", &line_size); + + if (!cache_size || !sets) + return; + + /* All these l2 caches have the same line = block size actually */ + if (!line_size) { + if (block_size) { + /* If linesize if not given, it is equal to blocksize */ + line_size = block_size; + } else { + /* Fall back to known size */ + pr_warn("L2C OF: no cache block/line size given: " + "falling back to default size %d bytes\n", + CACHE_LINE_SIZE); + line_size = CACHE_LINE_SIZE; + } + } + + if (line_size != CACHE_LINE_SIZE) + pr_warn("L2C OF: DT supplied line size %d bytes does " + "not match hardware line size of %d bytes\n", + line_size, + CACHE_LINE_SIZE); + + /* + * Since: + * set size = cache size / sets + * ways = cache size / (sets * line size) + * way size = cache size / (cache size / (sets * line size)) + * way size = sets * line size + * associativity = ways = cache size / way size + */ + way_size = sets * line_size; + *associativity = cache_size / way_size; + + if (way_size > max_way_size) { + pr_err("L2C OF: set size %dKB is too large\n", way_size); + return; + } + + pr_info("L2C OF: override cache size: %d bytes (%dKB)\n", + cache_size, cache_size >> 10); + pr_info("L2C OF: override line size: %d bytes\n", line_size); + pr_info("L2C OF: override way size: %d bytes (%dKB)\n", + way_size, way_size >> 10); + pr_info("L2C OF: override associativity: %d\n", *associativity); + + /* + * Calculates the bits 17:19 to set for way size: + * 512KB -> 6, 256KB -> 5, ... 16KB -> 1 + */ + way_size_bits = ilog2(way_size >> 10) - 3; + if (way_size_bits < 1 || way_size_bits > 6) { + pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n", + way_size); + return; + } + + mask |= L2C_AUX_CTRL_WAY_SIZE_MASK; + val |= (way_size_bits << L2C_AUX_CTRL_WAY_SIZE_SHIFT); + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + static void __init l2x0_of_parse(const struct device_node *np, u32 *aux_val, u32 *aux_mask) { @@ -952,6 +1045,7 @@ u32 tag = 0; u32 dirty = 0; u32 val = 0, mask = 0; + u32 assoc; of_property_read_u32(np, "arm,tag-latency", &tag); if (tag) { @@ -974,6 +1068,15 @@ val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; } + l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K); + if (assoc > 8) { + pr_err("l2x0 of: cache setting yield too high associativity\n"); + pr_err("l2x0 of: %d calculated, max 8\n", assoc); + } else { + mask |= L2X0_AUX_CTRL_ASSOC_MASK; + val |= (assoc << L2X0_AUX_CTRL_ASSOC_SHIFT); + } + *aux_val &= ~mask; *aux_val |= val; *aux_mask &= ~mask; @@ -1021,6 +1124,7 @@ u32 data[3] = { 0, 0, 0 }; u32 tag[3] = { 0, 0, 0 }; u32 filter[2] = { 0, 0 }; + u32 assoc; of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); if (tag[0] && tag[1] && tag[2]) @@ -1047,6 +1151,23 @@ writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN, l2x0_base + L310_ADDR_FILTER_START); } + + l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K); + switch (assoc) { + case 16: + *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; + *aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16; + *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; + break; + case 8: + *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; + *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; + break; + default: + pr_err("PL310 OF: cache setting yield illegal associativity\n"); + pr_err("PL310 OF: %d calculated, only 8 and 16 legal\n", assoc); + break; + } } static const struct l2c_init_data of_l2c310_data __initconst = {
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 7a996aa..c245d90 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c
@@ -12,6 +12,7 @@ #include <linux/bootmem.h> #include <linux/module.h> #include <linux/mm.h> +#include <linux/genalloc.h> #include <linux/gfp.h> #include <linux/errno.h> #include <linux/list.h> @@ -298,57 +299,29 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot, const void *caller) { - struct vm_struct *area; - unsigned long addr; - /* * DMA allocation can be mapped to user space, so lets * set VM_USERMAP flags too. */ - area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP, - caller); - if (!area) - return NULL; - addr = (unsigned long)area->addr; - area->phys_addr = __pfn_to_phys(page_to_pfn(page)); - - if (ioremap_page_range(addr, addr + size, area->phys_addr, prot)) { - vunmap((void *)addr); - return NULL; - } - return (void *)addr; + return dma_common_contiguous_remap(page, size, + VM_ARM_DMA_CONSISTENT | VM_USERMAP, + prot, caller); } static void __dma_free_remap(void *cpu_addr, size_t size) { - unsigned int flags = VM_ARM_DMA_CONSISTENT | VM_USERMAP; - struct vm_struct *area = find_vm_area(cpu_addr); - if (!area || (area->flags & flags) != flags) { - WARN(1, "trying to free invalid coherent area: %p\n", cpu_addr); - return; - } - unmap_kernel_range((unsigned long)cpu_addr, size); - vunmap(cpu_addr); + dma_common_free_remap(cpu_addr, size, + VM_ARM_DMA_CONSISTENT | VM_USERMAP); } #define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K +static struct gen_pool *atomic_pool; -struct dma_pool { - size_t size; - spinlock_t lock; - unsigned long *bitmap; - unsigned long nr_pages; - void *vaddr; - struct page **pages; -}; - -static struct dma_pool atomic_pool = { - .size = DEFAULT_DMA_COHERENT_POOL_SIZE, -}; +static size_t atomic_pool_size = DEFAULT_DMA_COHERENT_POOL_SIZE; static int __init early_coherent_pool(char *p) { - atomic_pool.size = memparse(p, &p); + atomic_pool_size = memparse(p, &p); return 0; } early_param("coherent_pool", early_coherent_pool); @@ -358,14 +331,14 @@ /* * Catch any attempt to set the pool size too late. */ - BUG_ON(atomic_pool.vaddr); + BUG_ON(atomic_pool); /* * Set architecture specific coherent pool size only if * it has not been changed by kernel command line parameter. */ - if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE) - atomic_pool.size = size; + if (atomic_pool_size == DEFAULT_DMA_COHERENT_POOL_SIZE) + atomic_pool_size = size; } /* @@ -373,52 +346,44 @@ */ static int __init atomic_pool_init(void) { - struct dma_pool *pool = &atomic_pool; pgprot_t prot = pgprot_dmacoherent(PAGE_KERNEL); gfp_t gfp = GFP_KERNEL | GFP_DMA; - unsigned long nr_pages = pool->size >> PAGE_SHIFT; - unsigned long *bitmap; struct page *page; - struct page **pages; void *ptr; - int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); - bitmap = kzalloc(bitmap_size, GFP_KERNEL); - if (!bitmap) - goto no_bitmap; - - pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); - if (!pages) - goto no_pages; + atomic_pool = gen_pool_create(PAGE_SHIFT, -1); + if (!atomic_pool) + goto out; if (dev_get_cma_area(NULL)) - ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, - atomic_pool_init); + ptr = __alloc_from_contiguous(NULL, atomic_pool_size, prot, + &page, atomic_pool_init); else - ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page, - atomic_pool_init); + ptr = __alloc_remap_buffer(NULL, atomic_pool_size, gfp, prot, + &page, atomic_pool_init); if (ptr) { - int i; + int ret; - for (i = 0; i < nr_pages; i++) - pages[i] = page + i; + ret = gen_pool_add_virt(atomic_pool, (unsigned long)ptr, + page_to_phys(page), + atomic_pool_size, -1); + if (ret) + goto destroy_genpool; - spin_lock_init(&pool->lock); - pool->vaddr = ptr; - pool->pages = pages; - pool->bitmap = bitmap; - pool->nr_pages = nr_pages; - pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", - (unsigned)pool->size / 1024); + gen_pool_set_algo(atomic_pool, + gen_pool_first_fit_order_align, + (void *)PAGE_SHIFT); + pr_info("DMA: preallocated %zd KiB pool for atomic coherent allocations\n", + atomic_pool_size / 1024); return 0; } - kfree(pages); -no_pages: - kfree(bitmap); -no_bitmap: - pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", - (unsigned)pool->size / 1024); +destroy_genpool: + gen_pool_destroy(atomic_pool); + atomic_pool = NULL; +out: + pr_err("DMA: failed to allocate %zx KiB pool for atomic coherent allocation\n", + atomic_pool_size / 1024); return -ENOMEM; } /* @@ -522,76 +487,36 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) { - struct dma_pool *pool = &atomic_pool; - unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; - unsigned int pageno; - unsigned long flags; + unsigned long val; void *ptr = NULL; - unsigned long align_mask; - if (!pool->vaddr) { + if (!atomic_pool) { WARN(1, "coherent pool not initialised!\n"); return NULL; } - /* - * Align the region allocation - allocations from pool are rather - * small, so align them to their order in pages, minimum is a page - * size. This helps reduce fragmentation of the DMA space. - */ - align_mask = (1 << get_order(size)) - 1; + val = gen_pool_alloc(atomic_pool, size); + if (val) { + phys_addr_t phys = gen_pool_virt_to_phys(atomic_pool, val); - spin_lock_irqsave(&pool->lock, flags); - pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages, - 0, count, align_mask); - if (pageno < pool->nr_pages) { - bitmap_set(pool->bitmap, pageno, count); - ptr = pool->vaddr + PAGE_SIZE * pageno; - *ret_page = pool->pages[pageno]; - } else { - pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" - "Please increase it with coherent_pool= kernel parameter!\n", - (unsigned)pool->size / 1024); + *ret_page = phys_to_page(phys); + ptr = (void *)val; } - spin_unlock_irqrestore(&pool->lock, flags); return ptr; } static bool __in_atomic_pool(void *start, size_t size) { - struct dma_pool *pool = &atomic_pool; - void *end = start + size; - void *pool_start = pool->vaddr; - void *pool_end = pool->vaddr + pool->size; - - if (start < pool_start || start >= pool_end) - return false; - - if (end <= pool_end) - return true; - - WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n", - start, end - 1, pool_start, pool_end - 1); - - return false; + return addr_in_gen_pool(atomic_pool, (unsigned long)start, size); } static int __free_from_pool(void *start, size_t size) { - struct dma_pool *pool = &atomic_pool; - unsigned long pageno, count; - unsigned long flags; - if (!__in_atomic_pool(start, size)) return 0; - pageno = (start - pool->vaddr) >> PAGE_SHIFT; - count = size >> PAGE_SHIFT; - - spin_lock_irqsave(&pool->lock, flags); - bitmap_clear(pool->bitmap, pageno, count); - spin_unlock_irqrestore(&pool->lock, flags); + gen_pool_free(atomic_pool, (unsigned long)start, size); return 1; } @@ -1271,29 +1196,8 @@ __iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot, const void *caller) { - unsigned int i, nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; - struct vm_struct *area; - unsigned long p; - - area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP, - caller); - if (!area) - return NULL; - - area->pages = pages; - area->nr_pages = nr_pages; - p = (unsigned long)area->addr; - - for (i = 0; i < nr_pages; i++) { - phys_addr_t phys = __pfn_to_phys(page_to_pfn(pages[i])); - if (ioremap_page_range(p, p + PAGE_SIZE, phys, prot)) - goto err; - p += PAGE_SIZE; - } - return area->addr; -err: - unmap_kernel_range((unsigned long)area->addr, size); - vunmap(area->addr); + return dma_common_pages_remap(pages, size, + VM_ARM_DMA_CONSISTENT | VM_USERMAP, prot, caller); return NULL; } @@ -1355,11 +1259,13 @@ static struct page **__atomic_get_pages(void *addr) { - struct dma_pool *pool = &atomic_pool; - struct page **pages = pool->pages; - int offs = (addr - pool->vaddr) >> PAGE_SHIFT; + struct page *page; + phys_addr_t phys; - return pages + offs; + phys = gen_pool_virt_to_phys(atomic_pool, (unsigned long)addr); + page = phys_to_page(phys); + + return (struct page **)page; } static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) @@ -1501,8 +1407,8 @@ } if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { - unmap_kernel_range((unsigned long)cpu_addr, size); - vunmap(cpu_addr); + dma_common_free_remap(cpu_addr, size, + VM_ARM_DMA_CONSISTENT | VM_USERMAP); } __iommu_remove_mapping(dev, handle, size);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 43d54f5..265b836 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c
@@ -400,3 +400,18 @@ */ __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +#ifdef CONFIG_HAVE_RCU_TABLE_FREE +void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address, + pmd_t *pmdp) +{ + pmd_t pmd = pmd_mksplitting(*pmdp); + VM_BUG_ON(address & ~PMD_MASK); + set_pmd_at(vma->vm_mm, address, pmdp, pmd); + + /* dummy IPI to serialise against fast_gup */ + kick_all_cpus_sync(); +} +#endif /* CONFIG_HAVE_RCU_TABLE_FREE */ +#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index c447ec7..e7a81ceb 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c
@@ -27,7 +27,7 @@ if (pud_none_or_clear_bad(pud) || (pud_val(*pud) & L_PGD_SWAPPER)) { pmd = pmd_alloc_one(&init_mm, addr); if (!pmd) { - pr_warning("Failed to allocate identity pmd.\n"); + pr_warn("Failed to allocate identity pmd.\n"); return; } /*
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 659c75d..9481f85 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c
@@ -322,7 +322,7 @@ * reserve memory for DMA contigouos allocations, * must come from DMA area inside low memory */ - dma_contiguous_reserve(min(arm_dma_limit, arm_lowmem_limit)); + dma_contiguous_reserve(arm_dma_limit); arm_memblock_steal_permitted = false; memblock_dump_all(); @@ -559,10 +559,10 @@ #ifdef CONFIG_MODULES " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" #endif - " .text : 0x%p" " - 0x%p" " (%4d kB)\n" - " .init : 0x%p" " - 0x%p" " (%4d kB)\n" - " .data : 0x%p" " - 0x%p" " (%4d kB)\n" - " .bss : 0x%p" " - 0x%p" " (%4d kB)\n", + " .text : 0x%p" " - 0x%p" " (%4td kB)\n" + " .init : 0x%p" " - 0x%p" " (%4td kB)\n" + " .data : 0x%p" " - 0x%p" " (%4td kB)\n" + " .bss : 0x%p" " - 0x%p" " (%4td kB)\n", MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) + (PAGE_SIZE)), @@ -636,6 +636,11 @@ void free_initrd_mem(unsigned long start, unsigned long end) { if (!keep_initrd) { + if (start == initrd_start) + start = round_down(start, PAGE_SIZE); + if (end == initrd_end) + end = round_up(end, PAGE_SIZE); + poison_init_mem((void *)start, PAGE_ALIGN(end) - start); free_reserved_area((void *)start, (void *)end, -1, "initrd"); }
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 8348ed6..9f98cec 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c
@@ -223,13 +223,13 @@ static int __init early_cachepolicy(char *p) { - pr_warning("cachepolicy kernel parameter not supported without cp15\n"); + pr_warn("cachepolicy kernel parameter not supported without cp15\n"); } early_param("cachepolicy", early_cachepolicy); static int __init noalign_setup(char *__unused) { - pr_warning("noalign kernel parameter not supported without cp15\n"); + pr_warn("noalign kernel parameter not supported without cp15\n"); } __setup("noalign", noalign_setup);
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index ee1d805..ba1196c 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S
@@ -279,7 +279,7 @@ .if \suspend .word cpu_\name\()_suspend_size -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND .word cpu_\name\()_do_suspend .word cpu_\name\()_do_resume #else
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 1a24e92..d3daed0 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S
@@ -146,7 +146,6 @@ mov \tmp, \ttbr1, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits mov \ttbr1, \ttbr1, lsl #ARCH_PGD_SHIFT @ lower bits addls \ttbr1, \ttbr1, #TTBR1_OFFSET - adcls \tmp, \tmp, #0 mcrr p15, 1, \ttbr1, \tmp, c2 @ load TTBR1 mov \tmp, \ttbr0, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits mov \ttbr0, \ttbr0, lsl #ARCH_PGD_SHIFT @ lower bits @@ -158,9 +157,9 @@ * TFR EV X F IHD LR S * .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced - * 11 0 110 1 0011 1100 .111 1101 < we want + * 11 0 110 0 0011 1100 .111 1101 < we want */ .align 2 .type v7_crval, #object v7_crval: - crval clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c + crval clear=0x0122c302, mmuset=0x30c03c7d, ucset=0x00c01c7c
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index b5d67db..b3a9478 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S
@@ -570,7 +570,7 @@ __v7_b15mp_proc_info: .long 0x420f00f0 .long 0xff0ffff0 - __v7_proc __v7_b15mp_setup, hwcaps = HWCAP_IDIV + __v7_proc __v7_b15mp_setup .size __v7_b15mp_proc_info, . - __v7_b15mp_proc_info /*
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index a37b989..e1268f9 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c
@@ -12,11 +12,11 @@ #include <linux/compiler.h> #include <linux/errno.h> #include <linux/filter.h> -#include <linux/moduleloader.h> #include <linux/netdevice.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/if_vlan.h> + #include <asm/cacheflush.h> #include <asm/hwcap.h> #include <asm/opcodes.h> @@ -174,6 +174,14 @@ } } +static void jit_fill_hole(void *area, unsigned int size) +{ + u32 *ptr; + /* We are guaranteed to have aligned memory. */ + for (ptr = area; size >= sizeof(u32); size -= sizeof(u32)) + *ptr++ = __opcode_to_mem_arm(ARM_INST_UDF); +} + static void build_prologue(struct jit_ctx *ctx) { u16 reg_set = saved_regs(ctx); @@ -859,9 +867,11 @@ void bpf_jit_compile(struct bpf_prog *fp) { + struct bpf_binary_header *header; struct jit_ctx ctx; unsigned tmp_idx; unsigned alloc_size; + u8 *target_ptr; if (!bpf_jit_enable) return; @@ -897,13 +907,15 @@ /* there's nothing after the epilogue on ARMv7 */ build_epilogue(&ctx); #endif - alloc_size = 4 * ctx.idx; - ctx.target = module_alloc(alloc_size); - if (unlikely(ctx.target == NULL)) + header = bpf_jit_binary_alloc(alloc_size, &target_ptr, + 4, jit_fill_hole); + if (header == NULL) goto out; + ctx.target = (u32 *) target_ptr; ctx.idx = 0; + build_prologue(&ctx); build_body(&ctx); build_epilogue(&ctx); @@ -919,8 +931,9 @@ /* there are 2 passes here */ bpf_jit_dump(fp->len, alloc_size, 2, ctx.target); + set_memory_ro((unsigned long)header, header->pages); fp->bpf_func = (void *)ctx.target; - fp->jited = 1; + fp->jited = true; out: kfree(ctx.offsets); return; @@ -928,7 +941,15 @@ void bpf_jit_free(struct bpf_prog *fp) { - if (fp->jited) - module_free(NULL, fp->bpf_func); - kfree(fp); + unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK; + struct bpf_binary_header *header = (void *)addr; + + if (!fp->jited) + goto free_filter; + + set_memory_rw(addr, header->pages); + bpf_jit_binary_free(header); + +free_filter: + bpf_prog_unlock_free(fp); }
diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index afb8462..b2d7d92 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h
@@ -114,6 +114,20 @@ #define ARM_INST_UMULL 0x00800090 +/* + * Use a suitable undefined instruction to use for ARM/Thumb2 faulting. + * We need to be careful not to conflict with those used by other modules + * (BUG, kprobes, etc) and the register_undef_hook() system. + * + * The ARM architecture reference manual guarantees that the following + * instruction space will produce an undefined instruction exception on + * all CPUs: + * + * ARM: xxxx 0111 1111 xxxx xxxx xxxx 1111 xxxx ARMv7-AR, section A5.4 + * Thumb: 1101 1110 xxxx xxxx ARMv7-M, section A5.2.6 + */ +#define ARM_INST_UDF 0xe7fddef1 + /* register */ #define _AL3_R(op, rd, rn, rm) ((op ## _R) | (rd) << 12 | (rn) << 16 | (rm)) /* immediate */
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile index 224e56c..f2af203 100644 --- a/arch/arm/plat-iop/Makefile +++ b/arch/arm/plat-iop/Makefile
@@ -2,8 +2,6 @@ # Makefile for the linux kernel. # -obj-y := - # IOP32X obj-$(CONFIG_ARCH_IOP32X) += i2c.o obj-$(CONFIG_ARCH_IOP32X) += pci.o @@ -27,7 +25,3 @@ # IOP13XX obj-$(CONFIG_ARCH_IOP13XX) += cp6.o obj-$(CONFIG_ARCH_IOP13XX) += time.o - -obj-m := -obj-n := -obj- :=
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 02fc10d..d055db3 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig
@@ -1,3 +1,6 @@ +config ARCH_OMAP + bool + if ARCH_OMAP menu "TI OMAP Common Features"
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 0b01b68..97a50e8 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile
@@ -6,9 +6,6 @@ # Common support obj-y := sram.o dma.o counter_32k.o -obj-m := -obj-n := -obj- := # omap_device support (OMAP2+ only at the moment)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c2baa8e..24770e5 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c
@@ -64,7 +64,9 @@ static struct omap_system_dma_plat_info *p; static struct omap_dma_dev_attr *d; - +static void omap_clear_dma(int lch); +static int omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio); static int enable_1510_mode; static u32 errata; @@ -284,66 +286,6 @@ } EXPORT_SYMBOL(omap_set_dma_transfer_params); -void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) -{ - BUG_ON(omap_dma_in_1510_mode()); - - if (dma_omap1()) { - u16 w; - - w = p->dma_read(CCR2, lch); - w &= ~0x03; - - switch (mode) { - case OMAP_DMA_CONSTANT_FILL: - w |= 0x01; - break; - case OMAP_DMA_TRANSPARENT_COPY: - w |= 0x02; - break; - case OMAP_DMA_COLOR_DIS: - break; - default: - BUG(); - } - p->dma_write(w, CCR2, lch); - - w = p->dma_read(LCH_CTRL, lch); - w &= ~0x0f; - /* Default is channel type 2D */ - if (mode) { - p->dma_write(color, COLOR, lch); - w |= 1; /* Channel type G */ - } - p->dma_write(w, LCH_CTRL, lch); - } - - if (dma_omap2plus()) { - u32 val; - - val = p->dma_read(CCR, lch); - val &= ~((1 << 17) | (1 << 16)); - - switch (mode) { - case OMAP_DMA_CONSTANT_FILL: - val |= 1 << 16; - break; - case OMAP_DMA_TRANSPARENT_COPY: - val |= 1 << 17; - break; - case OMAP_DMA_COLOR_DIS: - break; - default: - BUG(); - } - p->dma_write(val, CCR, lch); - - color &= 0xffffff; - p->dma_write(color, COLOR, lch); - } -} -EXPORT_SYMBOL(omap_set_dma_color_mode); - void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { if (dma_omap2plus()) { @@ -417,16 +359,6 @@ } EXPORT_SYMBOL(omap_set_dma_params); -void omap_set_dma_src_index(int lch, int eidx, int fidx) -{ - if (dma_omap2plus()) - return; - - p->dma_write(eidx, CSEI, lch); - p->dma_write(fidx, CSFI, lch); -} -EXPORT_SYMBOL(omap_set_dma_src_index); - void omap_set_dma_src_data_pack(int lch, int enable) { u32 l; @@ -510,16 +442,6 @@ } EXPORT_SYMBOL(omap_set_dma_dest_params); -void omap_set_dma_dest_index(int lch, int eidx, int fidx) -{ - if (dma_omap2plus()) - return; - - p->dma_write(eidx, CDEI, lch); - p->dma_write(fidx, CDFI, lch); -} -EXPORT_SYMBOL(omap_set_dma_dest_index); - void omap_set_dma_dest_data_pack(int lch, int enable) { u32 l; @@ -843,7 +765,7 @@ * Both of the above can be set with one of the following values : * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW */ -int +static int omap_dma_set_prio_lch(int lch, unsigned char read_prio, unsigned char write_prio) { @@ -864,13 +786,13 @@ return 0; } -EXPORT_SYMBOL(omap_dma_set_prio_lch); + /* * Clears any DMA state so the DMA engine is ready to restart with new buffers * through omap_start_dma(). Any buffers in flight are discarded. */ -void omap_clear_dma(int lch) +static void omap_clear_dma(int lch) { unsigned long flags; @@ -878,7 +800,6 @@ p->clear_dma(lch); local_irq_restore(flags); } -EXPORT_SYMBOL(omap_clear_dma); void omap_start_dma(int lch) { @@ -1167,652 +1088,6 @@ } EXPORT_SYMBOL(omap_dma_link_lch); -/* - * Once the DMA queue is stopped, we can destroy it. - */ -void omap_dma_unlink_lch(int lch_head, int lch_queue) -{ - if (omap_dma_in_1510_mode()) { - if (lch_head == lch_queue) { - p->dma_write(p->dma_read(CCR, lch_head) & ~(3 << 8), - CCR, lch_head); - return; - } - printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); - BUG(); - return; - } - - if (dma_chan[lch_head].next_lch != lch_queue || - dma_chan[lch_head].next_lch == -1) { - pr_err("omap_dma: trying to unlink non linked channels\n"); - dump_stack(); - } - - if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) || - (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) { - pr_err("omap_dma: You need to stop the DMA channels before unlinking\n"); - dump_stack(); - } - - dma_chan[lch_head].next_lch = -1; -} -EXPORT_SYMBOL(omap_dma_unlink_lch); - -#ifndef CONFIG_ARCH_OMAP1 -/* Create chain of DMA channesls */ -static void create_dma_lch_chain(int lch_head, int lch_queue) -{ - u32 l; - - /* Check if this is the first link in chain */ - if (dma_chan[lch_head].next_linked_ch == -1) { - dma_chan[lch_head].next_linked_ch = lch_queue; - dma_chan[lch_head].prev_linked_ch = lch_queue; - dma_chan[lch_queue].next_linked_ch = lch_head; - dma_chan[lch_queue].prev_linked_ch = lch_head; - } - - /* a link exists, link the new channel in circular chain */ - else { - dma_chan[lch_queue].next_linked_ch = - dma_chan[lch_head].next_linked_ch; - dma_chan[lch_queue].prev_linked_ch = lch_head; - dma_chan[lch_head].next_linked_ch = lch_queue; - dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch = - lch_queue; - } - - l = p->dma_read(CLNK_CTRL, lch_head); - l &= ~(0x1f); - l |= lch_queue; - p->dma_write(l, CLNK_CTRL, lch_head); - - l = p->dma_read(CLNK_CTRL, lch_queue); - l &= ~(0x1f); - l |= (dma_chan[lch_queue].next_linked_ch); - p->dma_write(l, CLNK_CTRL, lch_queue); -} - -/** - * @brief omap_request_dma_chain : Request a chain of DMA channels - * - * @param dev_id - Device id using the dma channel - * @param dev_name - Device name - * @param callback - Call back function - * @chain_id - - * @no_of_chans - Number of channels requested - * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN - * OMAP_DMA_DYNAMIC_CHAIN - * @params - Channel parameters - * - * @return - Success : 0 - * Failure: -EINVAL/-ENOMEM - */ -int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int lch, u16 ch_status, - void *data), - int *chain_id, int no_of_chans, int chain_mode, - struct omap_dma_channel_params params) -{ - int *channels; - int i, err; - - /* Is the chain mode valid ? */ - if (chain_mode != OMAP_DMA_STATIC_CHAIN - && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) { - printk(KERN_ERR "Invalid chain mode requested\n"); - return -EINVAL; - } - - if (unlikely((no_of_chans < 1 - || no_of_chans > dma_lch_count))) { - printk(KERN_ERR "Invalid Number of channels requested\n"); - return -EINVAL; - } - - /* - * Allocate a queue to maintain the status of the channels - * in the chain - */ - channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL); - if (channels == NULL) { - printk(KERN_ERR "omap_dma: No memory for channel queue\n"); - return -ENOMEM; - } - - /* request and reserve DMA channels for the chain */ - for (i = 0; i < no_of_chans; i++) { - err = omap_request_dma(dev_id, dev_name, - callback, NULL, &channels[i]); - if (err < 0) { - int j; - for (j = 0; j < i; j++) - omap_free_dma(channels[j]); - kfree(channels); - printk(KERN_ERR "omap_dma: Request failed %d\n", err); - return err; - } - dma_chan[channels[i]].prev_linked_ch = -1; - dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; - - /* - * Allowing client drivers to set common parameters now, - * so that later only relevant (src_start, dest_start - * and element count) can be set - */ - omap_set_dma_params(channels[i], ¶ms); - } - - *chain_id = channels[0]; - dma_linked_lch[*chain_id].linked_dmach_q = channels; - dma_linked_lch[*chain_id].chain_mode = chain_mode; - dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED; - dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans; - - for (i = 0; i < no_of_chans; i++) - dma_chan[channels[i]].chain_id = *chain_id; - - /* Reset the Queue pointers */ - OMAP_DMA_CHAIN_QINIT(*chain_id); - - /* Set up the chain */ - if (no_of_chans == 1) - create_dma_lch_chain(channels[0], channels[0]); - else { - for (i = 0; i < (no_of_chans - 1); i++) - create_dma_lch_chain(channels[i], channels[i + 1]); - } - - return 0; -} -EXPORT_SYMBOL(omap_request_dma_chain); - -/** - * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the - * params after setting it. Dont do this while dma is running!! - * - * @param chain_id - Chained logical channel id. - * @param params - * - * @return - Success : 0 - * Failure : -EINVAL - */ -int omap_modify_dma_chain_params(int chain_id, - struct omap_dma_channel_params params) -{ - int *channels; - u32 i; - - /* Check for input params */ - if (unlikely((chain_id < 0 - || chain_id >= dma_lch_count))) { - printk(KERN_ERR "Invalid chain id\n"); - return -EINVAL; - } - - /* Check if the chain exists */ - if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { - printk(KERN_ERR "Chain doesn't exists\n"); - return -EINVAL; - } - channels = dma_linked_lch[chain_id].linked_dmach_q; - - for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { - /* - * Allowing client drivers to set common parameters now, - * so that later only relevant (src_start, dest_start - * and element count) can be set - */ - omap_set_dma_params(channels[i], ¶ms); - } - - return 0; -} -EXPORT_SYMBOL(omap_modify_dma_chain_params); - -/** - * @brief omap_free_dma_chain - Free all the logical channels in a chain. - * - * @param chain_id - * - * @return - Success : 0 - * Failure : -EINVAL - */ -int omap_free_dma_chain(int chain_id) -{ - int *channels; - u32 i; - - /* Check for input params */ - if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { - printk(KERN_ERR "Invalid chain id\n"); - return -EINVAL; - } - - /* Check if the chain exists */ - if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { - printk(KERN_ERR "Chain doesn't exists\n"); - return -EINVAL; - } - - channels = dma_linked_lch[chain_id].linked_dmach_q; - for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { - dma_chan[channels[i]].next_linked_ch = -1; - dma_chan[channels[i]].prev_linked_ch = -1; - dma_chan[channels[i]].chain_id = -1; - dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; - omap_free_dma(channels[i]); - } - - kfree(channels); - - dma_linked_lch[chain_id].linked_dmach_q = NULL; - dma_linked_lch[chain_id].chain_mode = -1; - dma_linked_lch[chain_id].chain_state = -1; - - return (0); -} -EXPORT_SYMBOL(omap_free_dma_chain); - -/** - * @brief omap_dma_chain_status - Check if the chain is in - * active / inactive state. - * @param chain_id - * - * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE - * Failure : -EINVAL - */ -int omap_dma_chain_status(int chain_id) -{ - /* Check for input params */ - if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { - printk(KERN_ERR "Invalid chain id\n"); - return -EINVAL; - } - - /* Check if the chain exists */ - if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { - printk(KERN_ERR "Chain doesn't exists\n"); - return -EINVAL; - } - pr_debug("CHAINID=%d, qcnt=%d\n", chain_id, - dma_linked_lch[chain_id].q_count); - - if (OMAP_DMA_CHAIN_QEMPTY(chain_id)) - return OMAP_DMA_CHAIN_INACTIVE; - - return OMAP_DMA_CHAIN_ACTIVE; -} -EXPORT_SYMBOL(omap_dma_chain_status); - -/** - * @brief omap_dma_chain_a_transfer - Get a free channel from a chain, - * set the params and start the transfer. - * - * @param chain_id - * @param src_start - buffer start address - * @param dest_start - Dest address - * @param elem_count - * @param frame_count - * @param callbk_data - channel callback parameter data. - * - * @return - Success : 0 - * Failure: -EINVAL/-EBUSY - */ -int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start, - int elem_count, int frame_count, void *callbk_data) -{ - int *channels; - u32 l, lch; - int start_dma = 0; - - /* - * if buffer size is less than 1 then there is - * no use of starting the chain - */ - if (elem_count < 1) { - printk(KERN_ERR "Invalid buffer size\n"); - return -EINVAL; - } - - /* Check for input params */ - if (unlikely((chain_id < 0 - || chain_id >= dma_lch_count))) { - printk(KERN_ERR "Invalid chain id\n"); - return -EINVAL; - } - - /* Check if the chain exists */ - if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { - printk(KERN_ERR "Chain doesn't exist\n"); - return -EINVAL; - } - - /* Check if all the channels in chain are in use */ - if (OMAP_DMA_CHAIN_QFULL(chain_id)) - return -EBUSY; - - /* Frame count may be negative in case of indexed transfers */ - channels = dma_linked_lch[chain_id].linked_dmach_q; - - /* Get a free channel */ - lch = channels[dma_linked_lch[chain_id].q_tail]; - - /* Store the callback data */ - dma_chan[lch].data = callbk_data; - - /* Increment the q_tail */ - OMAP_DMA_CHAIN_INCQTAIL(chain_id); - - /* Set the params to the free channel */ - if (src_start != 0) - p->dma_write(src_start, CSSA, lch); - if (dest_start != 0) - p->dma_write(dest_start, CDSA, lch); - - /* Write the buffer size */ - p->dma_write(elem_count, CEN, lch); - p->dma_write(frame_count, CFN, lch); - - /* - * If the chain is dynamically linked, - * then we may have to start the chain if its not active - */ - if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) { - - /* - * In Dynamic chain, if the chain is not started, - * queue the channel - */ - if (dma_linked_lch[chain_id].chain_state == - DMA_CHAIN_NOTSTARTED) { - /* Enable the link in previous channel */ - if (dma_chan[dma_chan[lch].prev_linked_ch].state == - DMA_CH_QUEUED) - enable_lnk(dma_chan[lch].prev_linked_ch); - dma_chan[lch].state = DMA_CH_QUEUED; - } - - /* - * Chain is already started, make sure its active, - * if not then start the chain - */ - else { - start_dma = 1; - - if (dma_chan[dma_chan[lch].prev_linked_ch].state == - DMA_CH_STARTED) { - enable_lnk(dma_chan[lch].prev_linked_ch); - dma_chan[lch].state = DMA_CH_QUEUED; - start_dma = 0; - if (0 == ((1 << 7) & p->dma_read( - CCR, dma_chan[lch].prev_linked_ch))) { - disable_lnk(dma_chan[lch]. - prev_linked_ch); - pr_debug("\n prev ch is stopped\n"); - start_dma = 1; - } - } - - else if (dma_chan[dma_chan[lch].prev_linked_ch].state - == DMA_CH_QUEUED) { - enable_lnk(dma_chan[lch].prev_linked_ch); - dma_chan[lch].state = DMA_CH_QUEUED; - start_dma = 0; - } - omap_enable_channel_irq(lch); - - l = p->dma_read(CCR, lch); - - if ((0 == (l & (1 << 24)))) - l &= ~(1 << 25); - else - l |= (1 << 25); - if (start_dma == 1) { - if (0 == (l & (1 << 7))) { - l |= (1 << 7); - dma_chan[lch].state = DMA_CH_STARTED; - pr_debug("starting %d\n", lch); - p->dma_write(l, CCR, lch); - } else - start_dma = 0; - } else { - if (0 == (l & (1 << 7))) - p->dma_write(l, CCR, lch); - } - dma_chan[lch].flags |= OMAP_DMA_ACTIVE; - } - } - - return 0; -} -EXPORT_SYMBOL(omap_dma_chain_a_transfer); - -/** - * @brief omap_start_dma_chain_transfers - Start the chain - * - * @param chain_id - * - * @return - Success : 0 - * Failure : -EINVAL/-EBUSY - */ -int omap_start_dma_chain_transfers(int chain_id) -{ - int *channels; - u32 l, i; - - if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { - printk(KERN_ERR "Invalid chain id\n"); - return -EINVAL; - } - - channels = dma_linked_lch[chain_id].linked_dmach_q; - - if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) { - printk(KERN_ERR "Chain is already started\n"); - return -EBUSY; - } - - if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) { - for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; - i++) { - enable_lnk(channels[i]); - omap_enable_channel_irq(channels[i]); - } - } else { - omap_enable_channel_irq(channels[0]); - } - - l = p->dma_read(CCR, channels[0]); - l |= (1 << 7); - dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED; - dma_chan[channels[0]].state = DMA_CH_STARTED; - - if ((0 == (l & (1 << 24)))) - l &= ~(1 << 25); - else - l |= (1 << 25); - p->dma_write(l, CCR, channels[0]); - - dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE; - - return 0; -} -EXPORT_SYMBOL(omap_start_dma_chain_transfers); - -/** - * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain. - * - * @param chain_id - * - * @return - Success : 0 - * Failure : EINVAL - */ -int omap_stop_dma_chain_transfers(int chain_id) -{ - int *channels; - u32 l, i; - u32 sys_cf = 0; - - /* Check for input params */ - if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { - printk(KERN_ERR "Invalid chain id\n"); - return -EINVAL; - } - - /* Check if the chain exists */ - if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { - printk(KERN_ERR "Chain doesn't exists\n"); - return -EINVAL; - } - channels = dma_linked_lch[chain_id].linked_dmach_q; - - if (IS_DMA_ERRATA(DMA_ERRATA_i88)) { - sys_cf = p->dma_read(OCP_SYSCONFIG, 0); - l = sys_cf; - /* Middle mode reg set no Standby */ - l &= ~((1 << 12)|(1 << 13)); - p->dma_write(l, OCP_SYSCONFIG, 0); - } - - for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { - - /* Stop the Channel transmission */ - l = p->dma_read(CCR, channels[i]); - l &= ~(1 << 7); - p->dma_write(l, CCR, channels[i]); - - /* Disable the link in all the channels */ - disable_lnk(channels[i]); - dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; - - } - dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED; - - /* Reset the Queue pointers */ - OMAP_DMA_CHAIN_QINIT(chain_id); - - if (IS_DMA_ERRATA(DMA_ERRATA_i88)) - p->dma_write(sys_cf, OCP_SYSCONFIG, 0); - - return 0; -} -EXPORT_SYMBOL(omap_stop_dma_chain_transfers); - -/* Get the index of the ongoing DMA in chain */ -/** - * @brief omap_get_dma_chain_index - Get the element and frame index - * of the ongoing DMA in chain - * - * @param chain_id - * @param ei - Element index - * @param fi - Frame index - * - * @return - Success : 0 - * Failure : -EINVAL - */ -int omap_get_dma_chain_index(int chain_id, int *ei, int *fi) -{ - int lch; - int *channels; - - /* Check for input params */ - if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { - printk(KERN_ERR "Invalid chain id\n"); - return -EINVAL; - } - - /* Check if the chain exists */ - if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { - printk(KERN_ERR "Chain doesn't exists\n"); - return -EINVAL; - } - if ((!ei) || (!fi)) - return -EINVAL; - - channels = dma_linked_lch[chain_id].linked_dmach_q; - - /* Get the current channel */ - lch = channels[dma_linked_lch[chain_id].q_head]; - - *ei = p->dma_read(CCEN, lch); - *fi = p->dma_read(CCFN, lch); - - return 0; -} -EXPORT_SYMBOL(omap_get_dma_chain_index); - -/** - * @brief omap_get_dma_chain_dst_pos - Get the destination position of the - * ongoing DMA in chain - * - * @param chain_id - * - * @return - Success : Destination position - * Failure : -EINVAL - */ -int omap_get_dma_chain_dst_pos(int chain_id) -{ - int lch; - int *channels; - - /* Check for input params */ - if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { - printk(KERN_ERR "Invalid chain id\n"); - return -EINVAL; - } - - /* Check if the chain exists */ - if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { - printk(KERN_ERR "Chain doesn't exists\n"); - return -EINVAL; - } - - channels = dma_linked_lch[chain_id].linked_dmach_q; - - /* Get the current channel */ - lch = channels[dma_linked_lch[chain_id].q_head]; - - return p->dma_read(CDAC, lch); -} -EXPORT_SYMBOL(omap_get_dma_chain_dst_pos); - -/** - * @brief omap_get_dma_chain_src_pos - Get the source position - * of the ongoing DMA in chain - * @param chain_id - * - * @return - Success : Destination position - * Failure : -EINVAL - */ -int omap_get_dma_chain_src_pos(int chain_id) -{ - int lch; - int *channels; - - /* Check for input params */ - if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { - printk(KERN_ERR "Invalid chain id\n"); - return -EINVAL; - } - - /* Check if the chain exists */ - if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { - printk(KERN_ERR "Chain doesn't exists\n"); - return -EINVAL; - } - - channels = dma_linked_lch[chain_id].linked_dmach_q; - - /* Get the current channel */ - lch = channels[dma_linked_lch[chain_id].q_head]; - - return p->dma_read(CSAC, lch); -} -EXPORT_SYMBOL(omap_get_dma_chain_src_pos); -#endif /* ifndef CONFIG_ARCH_OMAP1 */ - /*----------------------------------------------------------------------------*/ #ifdef CONFIG_ARCH_OMAP1
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 3ec6e8e..f5b00f4 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c
@@ -499,7 +499,7 @@ d->netdev = &orion_ge00.dev; for (i = 0; i < d->nr_chips; i++) - d->chip[i].mii_bus = &orion_ge00_shared.dev; + d->chip[i].host_dev = &orion_ge00_shared.dev; orion_switch_device.dev.platform_data = d; platform_device_register(&orion_switch_device);
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index 3ea0290..1f5ee17 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c
@@ -258,6 +258,7 @@ { "pxa25x-ssp", PXA25x_SSP }, { "pxa25x-nssp", PXA25x_NSSP }, { "pxa27x-ssp", PXA27x_SSP }, + { "pxa3xx-ssp", PXA3xx_SSP }, { "pxa168-ssp", PXA168_SSP }, { "pxa910-ssp", PXA910_SSP }, { },
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index c87aefb..9bd2776 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig
@@ -268,8 +268,9 @@ comment "Power management" config SAMSUNG_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART + bool "Samsung PM Suspend debug" + depends on PM && DEBUG_KERNEL + depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 5fe1750..f0a0084 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile
@@ -6,11 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include -obj-y := -obj-m := -obj-n := dummy.o -obj- := - # Objects we always build independent of SoC choice obj-y += init.o cpu.o
diff --git a/arch/arm/plat-samsung/pm-debug.c b/arch/arm/plat-samsung/pm-debug.c index 8f19f66..3960960 100644 --- a/arch/arm/plat-samsung/pm-debug.c +++ b/arch/arm/plat-samsung/pm-debug.c
@@ -14,6 +14,7 @@ */ #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/map.h>
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index fd4e81a..9532f8d 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig
@@ -1,5 +1,6 @@ config ARM64 def_bool y + select ARCH_BINFMT_ELF_RANDOMIZE_PIE select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_SG_CHAIN select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST @@ -18,6 +19,7 @@ select COMMON_CLK select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS + select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_CPU_AUTOPROBE @@ -30,11 +32,13 @@ select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select GENERIC_TIME_VSYSCALL + select HANDLE_DOMAIN_IRQ select HARDIRQS_SW_RESEND select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK + select HAVE_BPF_JIT select HAVE_C_RECORDMCOUNT select HAVE_CC_STACKPROTECTOR select HAVE_DEBUG_BUGVERBOSE @@ -54,6 +58,7 @@ select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP + select HAVE_RCU_TABLE_FREE select HAVE_SYSCALL_TRACEPOINTS select IRQ_DOMAIN select MODULES_USE_ELF_RELA @@ -81,7 +86,7 @@ def_bool y config NO_IOPORT_MAP - def_bool y + def_bool y if !PCI config STACKTRACE_SUPPORT def_bool y @@ -107,6 +112,9 @@ config ZONE_DMA def_bool y +config HAVE_GENERIC_RCU_GUP + def_bool y + config ARCH_DMA_ADDR_T_64BIT def_bool y @@ -134,6 +142,11 @@ menu "Platform selection" +config ARCH_THUNDER + bool "Cavium Inc. Thunder SoC Family" + help + This enables support for Cavium's Thunder Family of SoCs. + config ARCH_VEXPRESS bool "ARMv8 software model (Versatile Express)" select ARCH_REQUIRE_GPIOLIB @@ -156,6 +169,26 @@ config ARM_AMBA bool +config PCI + bool "PCI support" + help + This feature enables support for PCI bus system. If you say Y + here, the kernel will include drivers and infrastructure code + to support PCI bus devices. + +config PCI_DOMAINS + def_bool PCI + +config PCI_DOMAINS_GENERIC + def_bool PCI + +config PCI_SYSCALL + def_bool PCI + +source "drivers/pci/Kconfig" +source "drivers/pci/pcie/Kconfig" +source "drivers/pci/hotplug/Kconfig" + endmenu menu "Kernel Features" @@ -200,7 +233,7 @@ config ARM64_VA_BITS_48 bool "48-bit" - depends on BROKEN + depends on !ARM_SMMU endchoice @@ -252,11 +285,11 @@ places. If unsure say N here. config NR_CPUS - int "Maximum number of CPUs (2-32)" - range 2 32 + int "Maximum number of CPUs (2-64)" + range 2 64 depends on SMP # These have to remain sorted largest to smallest - default "8" + default "64" config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" @@ -317,7 +350,7 @@ depends on XEN config XEN - bool "Xen guest support on ARM64 (EXPERIMENTAL)" + bool "Xen guest support on ARM64" depends on ARM64 && OF select SWIOTLB_XEN help
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug index 4ee8e90..0a12933 100644 --- a/arch/arm64/Kconfig.debug +++ b/arch/arm64/Kconfig.debug
@@ -43,4 +43,15 @@ of TEXT_OFFSET and platforms must not require a specific value. +config DEBUG_SET_MODULE_RONX + bool "Set loadable kernel module data as NX and text as RO" + depends on MODULES + help + This option helps catch unintended modifications to loadable + kernel module's text and read-only data. It also prevents execution + of module data. Such protection may interfere with run-time code + patching and dynamic kernel tracing - and they might also protect + against certain classes of kernel exploits. + If in doubt, say "N". + endmenu
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 2df5e5d..20901ff 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile
@@ -30,8 +30,6 @@ LD += -EL endif -comma = , - CHECKFLAGS += -D__aarch64__ # Default value @@ -47,6 +45,7 @@ export TEXT_OFFSET GZFLAGS core-y += arch/arm64/kernel/ arch/arm64/mm/ +core-$(CONFIG_NET) += arch/arm64/net/ core-$(CONFIG_KVM) += arch/arm64/kvm/ core-$(CONFIG_XEN) += arch/arm64/xen/ core-$(CONFIG_CRYPTO) += arch/arm64/crypto/
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index c52bdb0..f8001a6 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile
@@ -1,3 +1,4 @@ +dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts index b2f5622..2e25de0 100644 --- a/arch/arm64/boot/dts/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm-mustang.dts
@@ -25,6 +25,14 @@ }; }; +&pcie0clk { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + &serial0 { status = "ok"; }; @@ -32,3 +40,11 @@ &menet { status = "ok"; }; + +&sgenet0 { + status = "ok"; +}; + +&xgenet { + status = "ok"; +};
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi index c0aceef..295c72d 100644 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -176,6 +176,26 @@ clock-output-names = "menetclk"; }; + sge0clk: sge0clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + csr-mask = <0x3>; + clock-output-names = "sge0clk"; + }; + + xge0clk: xge0clk@1f61c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f61c000 0x0 0x1000>; + reg-names = "csr-reg"; + csr-mask = <0x3>; + clock-output-names = "xge0clk"; + }; + sataphy1clk: sataphy1clk@1f21c000 { compatible = "apm,xgene-device-clock"; #clock-cells = <1>; @@ -269,6 +289,184 @@ enable-mask = <0x2>; clock-output-names = "rtcclk"; }; + + rngpkaclk: rngpkaclk@17000000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg"; + csr-offset = <0xc>; + csr-mask = <0x10>; + enable-offset = <0x10>; + enable-mask = <0x10>; + clock-output-names = "rngpkaclk"; + }; + + pcie0clk: pcie0clk@1f2bc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2bc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie0clk"; + }; + + pcie1clk: pcie1clk@1f2cc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2cc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie1clk"; + }; + + pcie2clk: pcie2clk@1f2dc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2dc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie2clk"; + }; + + pcie3clk: pcie3clk@1f50c000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f50c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie3clk"; + }; + + pcie4clk: pcie4clk@1f51c000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f51c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie4clk"; + }; + }; + + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + }; + + pcie1: pcie@1f2c0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */ + 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>; + dma-coherent; + clocks = <&pcie1clk 0>; + }; + + pcie2: pcie@1f2d0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */ + 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>; + dma-coherent; + clocks = <&pcie2clk 0>; + }; + + pcie3: pcie@1f500000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */ + 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>; + dma-coherent; + clocks = <&pcie3clk 0>; + }; + + pcie4: pcie@1f510000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */ + 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>; + dma-coherent; + clocks = <&pcie4clk 0>; }; serial0: serial@1c020000 { @@ -407,7 +605,8 @@ interrupts = <0x0 0x3c 0x4>; dma-coherent; clocks = <&menetclk 0>; - local-mac-address = [00 01 73 00 00 01]; + /* mac address will be overwritten by the bootloader */ + local-mac-address = [00 00 00 00 00 00]; phy-connection-type = "rgmii"; phy-handle = <&menetphy>; mdio { @@ -421,5 +620,41 @@ }; }; + + sgenet0: ethernet@1f210000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x1f210000 0x0 0x10000>, + <0x0 0x1f200000 0x0 0X10000>, + <0x0 0x1B000000 0x0 0X20000>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0xA0 0x4>; + dma-coherent; + clocks = <&sge0clk 0>; + local-mac-address = [00 00 00 00 00 00]; + phy-connection-type = "sgmii"; + }; + + xgenet: ethernet@1f610000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x1f610000 0x0 0xd100>, + <0x0 0x1f600000 0x0 0X400>, + <0x0 0x18000000 0x0 0X200>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0x60 0x4>; + dma-coherent; + clocks = <&xge0clk 0>; + /* mac address will be overwritten by the bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-connection-type = "xgmii"; + }; + + rng: rng@10520000 { + compatible = "apm,xgene-rng"; + reg = <0x0 0x10520000 0x0 0x100>; + interrupts = <0x0 0x41 0x4>; + clocks = <&rngpkaclk 0>; + }; }; };
diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi index ac2cb24..c46cbb2 100644 --- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
@@ -22,7 +22,7 @@ bank-width = <4>; }; - vram@2,00000000 { + v2m_video_ram: vram@2,00000000 { compatible = "arm,vexpress-vram"; reg = <2 0x00000000 0x00800000>; }; @@ -179,9 +179,42 @@ clcd@1f0000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; interrupts = <14>; clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; clock-names = "clcdclk", "apb_pclk"; + arm,pl11x,framebuffer = <0x18000000 0x00180000>; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + + port { + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; + }; }; virtio_block@0130000 {
diff --git a/arch/arm64/boot/dts/thunder-88xx.dts b/arch/arm64/boot/dts/thunder-88xx.dts new file mode 100644 index 0000000..800ba65 --- /dev/null +++ b/arch/arm64/boot/dts/thunder-88xx.dts
@@ -0,0 +1,67 @@ +/* + * Cavium Thunder DTS file - Thunder board description + * + * Copyright (C) 2014, Cavium Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "thunder-88xx.dtsi" + +/ { + model = "Cavium ThunderX CN88XX board"; + compatible = "cavium,thunder-88xx"; + + aliases { + serial0 = &uaa0; + serial1 = &uaa1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x80000000>; + }; +};
diff --git a/arch/arm64/boot/dts/thunder-88xx.dtsi b/arch/arm64/boot/dts/thunder-88xx.dtsi new file mode 100644 index 0000000..d8c0bdc --- /dev/null +++ b/arch/arm64/boot/dts/thunder-88xx.dtsi
@@ -0,0 +1,401 @@ +/* + * Cavium Thunder DTS file - Thunder SoC description + * + * Copyright (C) 2014, Cavium Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "cavium,thunder-88xx"; + interrupt-parent = <&gic0>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "psci"; + }; + cpu@001 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x001>; + enable-method = "psci"; + }; + cpu@002 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x002>; + enable-method = "psci"; + }; + cpu@003 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x003>; + enable-method = "psci"; + }; + cpu@004 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x004>; + enable-method = "psci"; + }; + cpu@005 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x005>; + enable-method = "psci"; + }; + cpu@006 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x006>; + enable-method = "psci"; + }; + cpu@007 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x007>; + enable-method = "psci"; + }; + cpu@008 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x008>; + enable-method = "psci"; + }; + cpu@009 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x009>; + enable-method = "psci"; + }; + cpu@00a { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00a>; + enable-method = "psci"; + }; + cpu@00b { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00b>; + enable-method = "psci"; + }; + cpu@00c { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00c>; + enable-method = "psci"; + }; + cpu@00d { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00d>; + enable-method = "psci"; + }; + cpu@00e { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00e>; + enable-method = "psci"; + }; + cpu@00f { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00f>; + enable-method = "psci"; + }; + cpu@100 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + cpu@101 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + }; + cpu@102 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x102>; + enable-method = "psci"; + }; + cpu@103 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x103>; + enable-method = "psci"; + }; + cpu@104 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x104>; + enable-method = "psci"; + }; + cpu@105 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x105>; + enable-method = "psci"; + }; + cpu@106 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x106>; + enable-method = "psci"; + }; + cpu@107 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x107>; + enable-method = "psci"; + }; + cpu@108 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x108>; + enable-method = "psci"; + }; + cpu@109 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x109>; + enable-method = "psci"; + }; + cpu@10a { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10a>; + enable-method = "psci"; + }; + cpu@10b { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10b>; + enable-method = "psci"; + }; + cpu@10c { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10c>; + enable-method = "psci"; + }; + cpu@10d { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10d>; + enable-method = "psci"; + }; + cpu@10e { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10e>; + enable-method = "psci"; + }; + cpu@10f { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10f>; + enable-method = "psci"; + }; + cpu@200 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "psci"; + }; + cpu@201 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "psci"; + }; + cpu@202 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x202>; + enable-method = "psci"; + }; + cpu@203 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x203>; + enable-method = "psci"; + }; + cpu@204 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x204>; + enable-method = "psci"; + }; + cpu@205 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x205>; + enable-method = "psci"; + }; + cpu@206 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x206>; + enable-method = "psci"; + }; + cpu@207 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x207>; + enable-method = "psci"; + }; + cpu@208 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x208>; + enable-method = "psci"; + }; + cpu@209 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x209>; + enable-method = "psci"; + }; + cpu@20a { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20a>; + enable-method = "psci"; + }; + cpu@20b { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20b>; + enable-method = "psci"; + }; + cpu@20c { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20c>; + enable-method = "psci"; + }; + cpu@20d { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20d>; + enable-method = "psci"; + }; + cpu@20e { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20e>; + enable-method = "psci"; + }; + cpu@20f { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20f>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + refclk50mhz: refclk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "refclk50mhz"; + }; + + gic0: interrupt-controller@8010,00000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */ + <0x8010 0x80000000 0x0 0x600000>; /* GICR */ + interrupts = <1 9 0xf04>; + }; + + uaa0: serial@87e0,24000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x24000000 0x0 0x1000>; + interrupts = <1 21 4>; + clocks = <&refclk50mhz>; + clock-names = "apb_pclk"; + }; + + uaa1: serial@87e0,25000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x25000000 0x0 0x1000>; + interrupts = <1 22 4>; + clocks = <&refclk50mhz>; + clock-names = "apb_pclk"; + }; + }; +};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index d92ef3c..4ce602c 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig
@@ -32,6 +32,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set +CONFIG_ARCH_THUNDER=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_XGENE=y CONFIG_SMP=y @@ -77,6 +78,7 @@ # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -89,6 +91,7 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y +CONFIG_FB_ARMCLCD=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index 0b3fcf8..dc770bd 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild
@@ -9,8 +9,9 @@ generic-y += delay.h generic-y += div64.h generic-y += dma.h -generic-y += emergency-restart.h +generic-y += dma-contiguous.h generic-y += early_ioremap.h +generic-y += emergency-restart.h generic-y += errno.h generic-y += ftrace.h generic-y += hash.h @@ -29,6 +30,7 @@ generic-y += msgbuf.h generic-y += mutex.h generic-y += pci.h +generic-y += pci-bridge.h generic-y += poll.h generic-y += preempt.h generic-y += resource.h
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h index 9400596..f190971 100644 --- a/arch/arm64/include/asm/arch_timer.h +++ b/arch/arm64/include/asm/arch_timer.h
@@ -104,37 +104,6 @@ asm volatile("msr cntkctl_el1, %0" : : "r" (cntkctl)); } -static inline void arch_counter_set_user_access(void) -{ - u32 cntkctl = arch_timer_get_cntkctl(); - - /* Disable user access to the timers and the physical counter */ - /* Also disable virtual event stream */ - cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN - | ARCH_TIMER_USR_VT_ACCESS_EN - | ARCH_TIMER_VIRT_EVT_EN - | ARCH_TIMER_USR_PCT_ACCESS_EN); - - /* Enable user access to the virtual counter */ - cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN; - - arch_timer_set_cntkctl(cntkctl); -} - -static inline void arch_timer_evtstrm_enable(int divider) -{ - u32 cntkctl = arch_timer_get_cntkctl(); - cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK; - /* Set the divider and enable virtual event stream */ - cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT) - | ARCH_TIMER_VIRT_EVT_EN; - arch_timer_set_cntkctl(cntkctl); - elf_hwcap |= HWCAP_EVTSTRM; -#ifdef CONFIG_COMPAT - compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM; -#endif -} - static inline u64 arch_counter_get_cntvct(void) { u64 cval;
diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h index 65f1569..7047051 100644 --- a/arch/arm64/include/asm/atomic.h +++ b/arch/arm64/include/asm/atomic.h
@@ -35,7 +35,7 @@ * strex/ldrex monitor on some implementations. The reason we can use it for * atomic_set() is the clrex or dummy strex done on every exception return. */ -#define atomic_read(v) (*(volatile int *)&(v)->counter) +#define atomic_read(v) ACCESS_ONCE((v)->counter) #define atomic_set(v,i) (((v)->counter) = (i)) /* @@ -43,69 +43,51 @@ * store exclusive to ensure that these are atomic. We may loop * to ensure that the update happens. */ -static inline void atomic_add(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - asm volatile("// atomic_add\n" -"1: ldxr %w0, %2\n" -" add %w0, %w0, %w3\n" -" stxr %w1, %w0, %2\n" -" cbnz %w1, 1b" - : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i)); +#define ATOMIC_OP(op, asm_op) \ +static inline void atomic_##op(int i, atomic_t *v) \ +{ \ + unsigned long tmp; \ + int result; \ + \ + asm volatile("// atomic_" #op "\n" \ +"1: ldxr %w0, %2\n" \ +" " #asm_op " %w0, %w0, %w3\n" \ +" stxr %w1, %w0, %2\n" \ +" cbnz %w1, 1b" \ + : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ + : "Ir" (i)); \ +} \ + +#define ATOMIC_OP_RETURN(op, asm_op) \ +static inline int atomic_##op##_return(int i, atomic_t *v) \ +{ \ + unsigned long tmp; \ + int result; \ + \ + asm volatile("// atomic_" #op "_return\n" \ +"1: ldxr %w0, %2\n" \ +" " #asm_op " %w0, %w0, %w3\n" \ +" stlxr %w1, %w0, %2\n" \ +" cbnz %w1, 1b" \ + : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ + : "Ir" (i) \ + : "memory"); \ + \ + smp_mb(); \ + return result; \ } -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long tmp; - int result; +#define ATOMIC_OPS(op, asm_op) \ + ATOMIC_OP(op, asm_op) \ + ATOMIC_OP_RETURN(op, asm_op) - asm volatile("// atomic_add_return\n" -"1: ldxr %w0, %2\n" -" add %w0, %w0, %w3\n" -" stlxr %w1, %w0, %2\n" -" cbnz %w1, 1b" - : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i) - : "memory"); +ATOMIC_OPS(add, add) +ATOMIC_OPS(sub, sub) - smp_mb(); - return result; -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - - asm volatile("// atomic_sub\n" -"1: ldxr %w0, %2\n" -" sub %w0, %w0, %w3\n" -" stxr %w1, %w0, %2\n" -" cbnz %w1, 1b" - : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i)); -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long tmp; - int result; - - asm volatile("// atomic_sub_return\n" -"1: ldxr %w0, %2\n" -" sub %w0, %w0, %w3\n" -" stlxr %w1, %w0, %2\n" -" cbnz %w1, 1b" - : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i) - : "memory"); - - smp_mb(); - return result; -} +#undef ATOMIC_OPS +#undef ATOMIC_OP_RETURN +#undef ATOMIC_OP static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) { @@ -157,72 +139,53 @@ */ #define ATOMIC64_INIT(i) { (i) } -#define atomic64_read(v) (*(volatile long *)&(v)->counter) +#define atomic64_read(v) ACCESS_ONCE((v)->counter) #define atomic64_set(v,i) (((v)->counter) = (i)) -static inline void atomic64_add(u64 i, atomic64_t *v) -{ - long result; - unsigned long tmp; +#define ATOMIC64_OP(op, asm_op) \ +static inline void atomic64_##op(long i, atomic64_t *v) \ +{ \ + long result; \ + unsigned long tmp; \ + \ + asm volatile("// atomic64_" #op "\n" \ +"1: ldxr %0, %2\n" \ +" " #asm_op " %0, %0, %3\n" \ +" stxr %w1, %0, %2\n" \ +" cbnz %w1, 1b" \ + : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ + : "Ir" (i)); \ +} \ - asm volatile("// atomic64_add\n" -"1: ldxr %0, %2\n" -" add %0, %0, %3\n" -" stxr %w1, %0, %2\n" -" cbnz %w1, 1b" - : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i)); +#define ATOMIC64_OP_RETURN(op, asm_op) \ +static inline long atomic64_##op##_return(long i, atomic64_t *v) \ +{ \ + long result; \ + unsigned long tmp; \ + \ + asm volatile("// atomic64_" #op "_return\n" \ +"1: ldxr %0, %2\n" \ +" " #asm_op " %0, %0, %3\n" \ +" stlxr %w1, %0, %2\n" \ +" cbnz %w1, 1b" \ + : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ + : "Ir" (i) \ + : "memory"); \ + \ + smp_mb(); \ + return result; \ } -static inline long atomic64_add_return(long i, atomic64_t *v) -{ - long result; - unsigned long tmp; +#define ATOMIC64_OPS(op, asm_op) \ + ATOMIC64_OP(op, asm_op) \ + ATOMIC64_OP_RETURN(op, asm_op) - asm volatile("// atomic64_add_return\n" -"1: ldxr %0, %2\n" -" add %0, %0, %3\n" -" stlxr %w1, %0, %2\n" -" cbnz %w1, 1b" - : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i) - : "memory"); +ATOMIC64_OPS(add, add) +ATOMIC64_OPS(sub, sub) - smp_mb(); - return result; -} - -static inline void atomic64_sub(u64 i, atomic64_t *v) -{ - long result; - unsigned long tmp; - - asm volatile("// atomic64_sub\n" -"1: ldxr %0, %2\n" -" sub %0, %0, %3\n" -" stxr %w1, %0, %2\n" -" cbnz %w1, 1b" - : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i)); -} - -static inline long atomic64_sub_return(long i, atomic64_t *v) -{ - long result; - unsigned long tmp; - - asm volatile("// atomic64_sub_return\n" -"1: ldxr %0, %2\n" -" sub %0, %0, %3\n" -" stlxr %w1, %0, %2\n" -" cbnz %w1, 1b" - : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i) - : "memory"); - - smp_mb(); - return result; -} +#undef ATOMIC64_OPS +#undef ATOMIC64_OP_RETURN +#undef ATOMIC64_OP static inline long atomic64_cmpxchg(atomic64_t *ptr, long old, long new) {
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index f2defe1..689b637 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h
@@ -148,4 +148,8 @@ { } +int set_memory_ro(unsigned long addr, int numpages); +int set_memory_rw(unsigned long addr, int numpages); +int set_memory_x(unsigned long addr, int numpages); +int set_memory_nx(unsigned long addr, int numpages); #endif
diff --git a/arch/arm64/include/asm/cachetype.h b/arch/arm64/include/asm/cachetype.h index 7a2e076..4c631a0 100644 --- a/arch/arm64/include/asm/cachetype.h +++ b/arch/arm64/include/asm/cachetype.h
@@ -39,6 +39,26 @@ extern unsigned long __icache_flags; +#define CCSIDR_EL1_LINESIZE_MASK 0x7 +#define CCSIDR_EL1_LINESIZE(x) ((x) & CCSIDR_EL1_LINESIZE_MASK) + +#define CCSIDR_EL1_NUMSETS_SHIFT 13 +#define CCSIDR_EL1_NUMSETS_MASK (0x7fff << CCSIDR_EL1_NUMSETS_SHIFT) +#define CCSIDR_EL1_NUMSETS(x) \ + (((x) & CCSIDR_EL1_NUMSETS_MASK) >> CCSIDR_EL1_NUMSETS_SHIFT) + +extern u64 __attribute_const__ icache_get_ccsidr(void); + +static inline int icache_get_linesize(void) +{ + return 16 << CCSIDR_EL1_LINESIZE(icache_get_ccsidr()); +} + +static inline int icache_get_numsets(void) +{ + return 1 + CCSIDR_EL1_NUMSETS(icache_get_ccsidr()); +} + /* * Whilst the D-side always behaves as PIPT on AArch64, aliasing is * permitted in the I-cache.
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index 253e33b..56de5aa 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h
@@ -37,8 +37,8 @@ typedef s32 compat_time_t; typedef s32 compat_clock_t; typedef s32 compat_pid_t; -typedef u32 __compat_uid_t; -typedef u32 __compat_gid_t; +typedef u16 __compat_uid_t; +typedef u16 __compat_gid_t; typedef u16 __compat_uid16_t; typedef u16 __compat_gid16_t; typedef u32 __compat_uid32_t;
diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h index d7b4b38..6f8e2ef 100644 --- a/arch/arm64/include/asm/cpu_ops.h +++ b/arch/arm64/include/asm/cpu_ops.h
@@ -28,6 +28,8 @@ * enable-method property. * @cpu_init: Reads any data necessary for a specific enable-method from the * devicetree, for a given cpu node and proposed logical id. + * @cpu_init_idle: Reads any data necessary to initialize CPU idle states from + * devicetree, for a given cpu node and proposed logical id. * @cpu_prepare: Early one-time preparation step for a cpu. If there is a * mechanism for doing so, tests whether it is possible to boot * the given CPU. @@ -47,6 +49,7 @@ struct cpu_operations { const char *name; int (*cpu_init)(struct device_node *, unsigned int); + int (*cpu_init_idle)(struct device_node *, unsigned int); int (*cpu_prepare)(unsigned int); int (*cpu_boot)(unsigned int); void (*cpu_postboot)(void); @@ -61,7 +64,7 @@ }; extern const struct cpu_operations *cpu_ops[NR_CPUS]; -extern int __init cpu_read_ops(struct device_node *dn, int cpu); -extern void __init cpu_read_bootcpu_ops(void); +int __init cpu_read_ops(struct device_node *dn, int cpu); +void __init cpu_read_bootcpu_ops(void); #endif /* ifndef __ASM_CPU_OPS_H */
diff --git a/arch/arm64/include/asm/cpuidle.h b/arch/arm64/include/asm/cpuidle.h new file mode 100644 index 0000000..b52a993 --- /dev/null +++ b/arch/arm64/include/asm/cpuidle.h
@@ -0,0 +1,13 @@ +#ifndef __ASM_CPUIDLE_H +#define __ASM_CPUIDLE_H + +#ifdef CONFIG_CPU_IDLE +extern int cpu_init_idle(unsigned int cpu); +#else +static inline int cpu_init_idle(unsigned int cpu) +{ + return -EOPNOTSUPP; +} +#endif + +#endif
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h index 7fb3437..40ec68a 100644 --- a/arch/arm64/include/asm/debug-monitors.h +++ b/arch/arm64/include/asm/debug-monitors.h
@@ -48,11 +48,13 @@ /* * #imm16 values used for BRK instruction generation * Allowed values for kgbd are 0x400 - 0x7ff + * 0x100: for triggering a fault on purpose (reserved) * 0x400: for dynamic BRK instruction * 0x401: for compile time BRK instruction */ -#define KGDB_DYN_DGB_BRK_IMM 0x400 -#define KDBG_COMPILED_DBG_BRK_IMM 0x401 +#define FAULT_BRK_IMM 0x100 +#define KGDB_DYN_DBG_BRK_IMM 0x400 +#define KGDB_COMPILED_DBG_BRK_IMM 0x401 /* * BRK instruction encoding @@ -61,24 +63,30 @@ #define AARCH64_BREAK_MON 0xd4200000 /* + * BRK instruction for provoking a fault on purpose + * Unlike kgdb, #imm16 value with unallocated handler is used for faulting. + */ +#define AARCH64_BREAK_FAULT (AARCH64_BREAK_MON | (FAULT_BRK_IMM << 5)) + +/* * Extract byte from BRK instruction */ -#define KGDB_DYN_DGB_BRK_INS_BYTE(x) \ +#define KGDB_DYN_DBG_BRK_INS_BYTE(x) \ ((((AARCH64_BREAK_MON) & 0xffe0001f) >> (x * 8)) & 0xff) /* * Extract byte from BRK #imm16 */ -#define KGBD_DYN_DGB_BRK_IMM_BYTE(x) \ - (((((KGDB_DYN_DGB_BRK_IMM) & 0xffff) << 5) >> (x * 8)) & 0xff) +#define KGBD_DYN_DBG_BRK_IMM_BYTE(x) \ + (((((KGDB_DYN_DBG_BRK_IMM) & 0xffff) << 5) >> (x * 8)) & 0xff) -#define KGDB_DYN_DGB_BRK_BYTE(x) \ - (KGDB_DYN_DGB_BRK_INS_BYTE(x) | KGBD_DYN_DGB_BRK_IMM_BYTE(x)) +#define KGDB_DYN_DBG_BRK_BYTE(x) \ + (KGDB_DYN_DBG_BRK_INS_BYTE(x) | KGBD_DYN_DBG_BRK_IMM_BYTE(x)) -#define KGDB_DYN_BRK_INS_BYTE0 KGDB_DYN_DGB_BRK_BYTE(0) -#define KGDB_DYN_BRK_INS_BYTE1 KGDB_DYN_DGB_BRK_BYTE(1) -#define KGDB_DYN_BRK_INS_BYTE2 KGDB_DYN_DGB_BRK_BYTE(2) -#define KGDB_DYN_BRK_INS_BYTE3 KGDB_DYN_DGB_BRK_BYTE(3) +#define KGDB_DYN_BRK_INS_BYTE0 KGDB_DYN_DBG_BRK_BYTE(0) +#define KGDB_DYN_BRK_INS_BYTE1 KGDB_DYN_DBG_BRK_BYTE(1) +#define KGDB_DYN_BRK_INS_BYTE2 KGDB_DYN_DBG_BRK_BYTE(2) +#define KGDB_DYN_BRK_INS_BYTE3 KGDB_DYN_DBG_BRK_BYTE(3) #define CACHE_FLUSH_IS_SAFE 1
diff --git a/arch/arm64/include/asm/dma-contiguous.h b/arch/arm64/include/asm/dma-contiguous.h deleted file mode 100644 index 14c4c0c..0000000 --- a/arch/arm64/include/asm/dma-contiguous.h +++ /dev/null
@@ -1,28 +0,0 @@ -/* - * Copyright (c) 2013, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _ASM_DMA_CONTIGUOUS_H -#define _ASM_DMA_CONTIGUOUS_H - -#ifdef __KERNEL__ -#ifdef CONFIG_DMA_CMA - -#include <linux/types.h> - -static inline void -dma_contiguous_early_fixup(phys_addr_t base, unsigned long size) { } - -#endif -#endif - -#endif
diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h index dc82e52..adeae3f 100644 --- a/arch/arm64/include/asm/dma-mapping.h +++ b/arch/arm64/include/asm/dma-mapping.h
@@ -52,6 +52,13 @@ dev->archdata.dma_ops = ops; } +static inline int set_arch_dma_coherent_ops(struct device *dev) +{ + set_dma_ops(dev, &coherent_swiotlb_dma_ops); + return 0; +} +#define set_arch_dma_coherent_ops set_arch_dma_coherent_ops + #include <asm-generic/dma-mapping-common.h> static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h index 01d3aab..1f65be3 100644 --- a/arch/arm64/include/asm/elf.h +++ b/arch/arm64/include/asm/elf.h
@@ -126,7 +126,7 @@ * that it will "exec", and that there is sufficient room for the brk. */ extern unsigned long randomize_et_dyn(unsigned long base); -#define ELF_ET_DYN_BASE (randomize_et_dyn(2 * TASK_SIZE_64 / 3)) +#define ELF_ET_DYN_BASE (2 * TASK_SIZE_64 / 3) /* * When the program starts, a1 contains a pointer to a function to be @@ -169,7 +169,7 @@ #define COMPAT_ELF_PLATFORM ("v8l") #endif -#define COMPAT_ELF_ET_DYN_BASE (randomize_et_dyn(2 * TASK_SIZE_32 / 3)) +#define COMPAT_ELF_ET_DYN_BASE (2 * TASK_SIZE_32 / 3) /* AArch32 registers. */ #define COMPAT_ELF_NGREG 18
diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h index 0be6782..e8a3268 100644 --- a/arch/arm64/include/asm/hardirq.h +++ b/arch/arm64/include/asm/hardirq.h
@@ -47,8 +47,6 @@ irq_err_count++; } -extern void handle_IRQ(unsigned int, struct pt_regs *); - /* * No arch-specific IRQ flags. */
diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h index dc1f73b..56a9e63 100644 --- a/arch/arm64/include/asm/insn.h +++ b/arch/arm64/include/asm/insn.h
@@ -2,6 +2,8 @@ * Copyright (C) 2013 Huawei Ltd. * Author: Jiang Liu <liuj97@gmail.com> * + * Copyright (C) 2014 Zi Shen Lim <zlim.lnx@gmail.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -64,12 +66,155 @@ AARCH64_INSN_IMM_14, AARCH64_INSN_IMM_12, AARCH64_INSN_IMM_9, + AARCH64_INSN_IMM_7, + AARCH64_INSN_IMM_6, + AARCH64_INSN_IMM_S, + AARCH64_INSN_IMM_R, AARCH64_INSN_IMM_MAX }; +enum aarch64_insn_register_type { + AARCH64_INSN_REGTYPE_RT, + AARCH64_INSN_REGTYPE_RN, + AARCH64_INSN_REGTYPE_RT2, + AARCH64_INSN_REGTYPE_RM, + AARCH64_INSN_REGTYPE_RD, + AARCH64_INSN_REGTYPE_RA, +}; + +enum aarch64_insn_register { + AARCH64_INSN_REG_0 = 0, + AARCH64_INSN_REG_1 = 1, + AARCH64_INSN_REG_2 = 2, + AARCH64_INSN_REG_3 = 3, + AARCH64_INSN_REG_4 = 4, + AARCH64_INSN_REG_5 = 5, + AARCH64_INSN_REG_6 = 6, + AARCH64_INSN_REG_7 = 7, + AARCH64_INSN_REG_8 = 8, + AARCH64_INSN_REG_9 = 9, + AARCH64_INSN_REG_10 = 10, + AARCH64_INSN_REG_11 = 11, + AARCH64_INSN_REG_12 = 12, + AARCH64_INSN_REG_13 = 13, + AARCH64_INSN_REG_14 = 14, + AARCH64_INSN_REG_15 = 15, + AARCH64_INSN_REG_16 = 16, + AARCH64_INSN_REG_17 = 17, + AARCH64_INSN_REG_18 = 18, + AARCH64_INSN_REG_19 = 19, + AARCH64_INSN_REG_20 = 20, + AARCH64_INSN_REG_21 = 21, + AARCH64_INSN_REG_22 = 22, + AARCH64_INSN_REG_23 = 23, + AARCH64_INSN_REG_24 = 24, + AARCH64_INSN_REG_25 = 25, + AARCH64_INSN_REG_26 = 26, + AARCH64_INSN_REG_27 = 27, + AARCH64_INSN_REG_28 = 28, + AARCH64_INSN_REG_29 = 29, + AARCH64_INSN_REG_FP = 29, /* Frame pointer */ + AARCH64_INSN_REG_30 = 30, + AARCH64_INSN_REG_LR = 30, /* Link register */ + AARCH64_INSN_REG_ZR = 31, /* Zero: as source register */ + AARCH64_INSN_REG_SP = 31 /* Stack pointer: as load/store base reg */ +}; + +enum aarch64_insn_variant { + AARCH64_INSN_VARIANT_32BIT, + AARCH64_INSN_VARIANT_64BIT +}; + +enum aarch64_insn_condition { + AARCH64_INSN_COND_EQ = 0x0, /* == */ + AARCH64_INSN_COND_NE = 0x1, /* != */ + AARCH64_INSN_COND_CS = 0x2, /* unsigned >= */ + AARCH64_INSN_COND_CC = 0x3, /* unsigned < */ + AARCH64_INSN_COND_MI = 0x4, /* < 0 */ + AARCH64_INSN_COND_PL = 0x5, /* >= 0 */ + AARCH64_INSN_COND_VS = 0x6, /* overflow */ + AARCH64_INSN_COND_VC = 0x7, /* no overflow */ + AARCH64_INSN_COND_HI = 0x8, /* unsigned > */ + AARCH64_INSN_COND_LS = 0x9, /* unsigned <= */ + AARCH64_INSN_COND_GE = 0xa, /* signed >= */ + AARCH64_INSN_COND_LT = 0xb, /* signed < */ + AARCH64_INSN_COND_GT = 0xc, /* signed > */ + AARCH64_INSN_COND_LE = 0xd, /* signed <= */ + AARCH64_INSN_COND_AL = 0xe, /* always */ +}; + enum aarch64_insn_branch_type { AARCH64_INSN_BRANCH_NOLINK, AARCH64_INSN_BRANCH_LINK, + AARCH64_INSN_BRANCH_RETURN, + AARCH64_INSN_BRANCH_COMP_ZERO, + AARCH64_INSN_BRANCH_COMP_NONZERO, +}; + +enum aarch64_insn_size_type { + AARCH64_INSN_SIZE_8, + AARCH64_INSN_SIZE_16, + AARCH64_INSN_SIZE_32, + AARCH64_INSN_SIZE_64, +}; + +enum aarch64_insn_ldst_type { + AARCH64_INSN_LDST_LOAD_REG_OFFSET, + AARCH64_INSN_LDST_STORE_REG_OFFSET, + AARCH64_INSN_LDST_LOAD_PAIR_PRE_INDEX, + AARCH64_INSN_LDST_STORE_PAIR_PRE_INDEX, + AARCH64_INSN_LDST_LOAD_PAIR_POST_INDEX, + AARCH64_INSN_LDST_STORE_PAIR_POST_INDEX, +}; + +enum aarch64_insn_adsb_type { + AARCH64_INSN_ADSB_ADD, + AARCH64_INSN_ADSB_SUB, + AARCH64_INSN_ADSB_ADD_SETFLAGS, + AARCH64_INSN_ADSB_SUB_SETFLAGS +}; + +enum aarch64_insn_movewide_type { + AARCH64_INSN_MOVEWIDE_ZERO, + AARCH64_INSN_MOVEWIDE_KEEP, + AARCH64_INSN_MOVEWIDE_INVERSE +}; + +enum aarch64_insn_bitfield_type { + AARCH64_INSN_BITFIELD_MOVE, + AARCH64_INSN_BITFIELD_MOVE_UNSIGNED, + AARCH64_INSN_BITFIELD_MOVE_SIGNED +}; + +enum aarch64_insn_data1_type { + AARCH64_INSN_DATA1_REVERSE_16, + AARCH64_INSN_DATA1_REVERSE_32, + AARCH64_INSN_DATA1_REVERSE_64, +}; + +enum aarch64_insn_data2_type { + AARCH64_INSN_DATA2_UDIV, + AARCH64_INSN_DATA2_SDIV, + AARCH64_INSN_DATA2_LSLV, + AARCH64_INSN_DATA2_LSRV, + AARCH64_INSN_DATA2_ASRV, + AARCH64_INSN_DATA2_RORV, +}; + +enum aarch64_insn_data3_type { + AARCH64_INSN_DATA3_MADD, + AARCH64_INSN_DATA3_MSUB, +}; + +enum aarch64_insn_logic_type { + AARCH64_INSN_LOGIC_AND, + AARCH64_INSN_LOGIC_BIC, + AARCH64_INSN_LOGIC_ORR, + AARCH64_INSN_LOGIC_ORN, + AARCH64_INSN_LOGIC_EOR, + AARCH64_INSN_LOGIC_EON, + AARCH64_INSN_LOGIC_AND_SETFLAGS, + AARCH64_INSN_LOGIC_BIC_SETFLAGS }; #define __AARCH64_INSN_FUNCS(abbr, mask, val) \ @@ -78,13 +223,58 @@ static __always_inline u32 aarch64_insn_get_##abbr##_value(void) \ { return (val); } +__AARCH64_INSN_FUNCS(str_reg, 0x3FE0EC00, 0x38206800) +__AARCH64_INSN_FUNCS(ldr_reg, 0x3FE0EC00, 0x38606800) +__AARCH64_INSN_FUNCS(stp_post, 0x7FC00000, 0x28800000) +__AARCH64_INSN_FUNCS(ldp_post, 0x7FC00000, 0x28C00000) +__AARCH64_INSN_FUNCS(stp_pre, 0x7FC00000, 0x29800000) +__AARCH64_INSN_FUNCS(ldp_pre, 0x7FC00000, 0x29C00000) +__AARCH64_INSN_FUNCS(add_imm, 0x7F000000, 0x11000000) +__AARCH64_INSN_FUNCS(adds_imm, 0x7F000000, 0x31000000) +__AARCH64_INSN_FUNCS(sub_imm, 0x7F000000, 0x51000000) +__AARCH64_INSN_FUNCS(subs_imm, 0x7F000000, 0x71000000) +__AARCH64_INSN_FUNCS(movn, 0x7F800000, 0x12800000) +__AARCH64_INSN_FUNCS(sbfm, 0x7F800000, 0x13000000) +__AARCH64_INSN_FUNCS(bfm, 0x7F800000, 0x33000000) +__AARCH64_INSN_FUNCS(movz, 0x7F800000, 0x52800000) +__AARCH64_INSN_FUNCS(ubfm, 0x7F800000, 0x53000000) +__AARCH64_INSN_FUNCS(movk, 0x7F800000, 0x72800000) +__AARCH64_INSN_FUNCS(add, 0x7F200000, 0x0B000000) +__AARCH64_INSN_FUNCS(adds, 0x7F200000, 0x2B000000) +__AARCH64_INSN_FUNCS(sub, 0x7F200000, 0x4B000000) +__AARCH64_INSN_FUNCS(subs, 0x7F200000, 0x6B000000) +__AARCH64_INSN_FUNCS(madd, 0x7FE08000, 0x1B000000) +__AARCH64_INSN_FUNCS(msub, 0x7FE08000, 0x1B008000) +__AARCH64_INSN_FUNCS(udiv, 0x7FE0FC00, 0x1AC00800) +__AARCH64_INSN_FUNCS(sdiv, 0x7FE0FC00, 0x1AC00C00) +__AARCH64_INSN_FUNCS(lslv, 0x7FE0FC00, 0x1AC02000) +__AARCH64_INSN_FUNCS(lsrv, 0x7FE0FC00, 0x1AC02400) +__AARCH64_INSN_FUNCS(asrv, 0x7FE0FC00, 0x1AC02800) +__AARCH64_INSN_FUNCS(rorv, 0x7FE0FC00, 0x1AC02C00) +__AARCH64_INSN_FUNCS(rev16, 0x7FFFFC00, 0x5AC00400) +__AARCH64_INSN_FUNCS(rev32, 0x7FFFFC00, 0x5AC00800) +__AARCH64_INSN_FUNCS(rev64, 0x7FFFFC00, 0x5AC00C00) +__AARCH64_INSN_FUNCS(and, 0x7F200000, 0x0A000000) +__AARCH64_INSN_FUNCS(bic, 0x7F200000, 0x0A200000) +__AARCH64_INSN_FUNCS(orr, 0x7F200000, 0x2A000000) +__AARCH64_INSN_FUNCS(orn, 0x7F200000, 0x2A200000) +__AARCH64_INSN_FUNCS(eor, 0x7F200000, 0x4A000000) +__AARCH64_INSN_FUNCS(eon, 0x7F200000, 0x4A200000) +__AARCH64_INSN_FUNCS(ands, 0x7F200000, 0x6A000000) +__AARCH64_INSN_FUNCS(bics, 0x7F200000, 0x6A200000) __AARCH64_INSN_FUNCS(b, 0xFC000000, 0x14000000) __AARCH64_INSN_FUNCS(bl, 0xFC000000, 0x94000000) +__AARCH64_INSN_FUNCS(cbz, 0xFE000000, 0x34000000) +__AARCH64_INSN_FUNCS(cbnz, 0xFE000000, 0x35000000) +__AARCH64_INSN_FUNCS(bcond, 0xFF000010, 0x54000000) __AARCH64_INSN_FUNCS(svc, 0xFFE0001F, 0xD4000001) __AARCH64_INSN_FUNCS(hvc, 0xFFE0001F, 0xD4000002) __AARCH64_INSN_FUNCS(smc, 0xFFE0001F, 0xD4000003) __AARCH64_INSN_FUNCS(brk, 0xFFE0001F, 0xD4200000) __AARCH64_INSN_FUNCS(hint, 0xFFFFF01F, 0xD503201F) +__AARCH64_INSN_FUNCS(br, 0xFFFFFC1F, 0xD61F0000) +__AARCH64_INSN_FUNCS(blr, 0xFFFFFC1F, 0xD63F0000) +__AARCH64_INSN_FUNCS(ret, 0xFFFFFC1F, 0xD65F0000) #undef __AARCH64_INSN_FUNCS @@ -97,8 +287,67 @@ u32 insn, u64 imm); u32 aarch64_insn_gen_branch_imm(unsigned long pc, unsigned long addr, enum aarch64_insn_branch_type type); +u32 aarch64_insn_gen_comp_branch_imm(unsigned long pc, unsigned long addr, + enum aarch64_insn_register reg, + enum aarch64_insn_variant variant, + enum aarch64_insn_branch_type type); +u32 aarch64_insn_gen_cond_branch_imm(unsigned long pc, unsigned long addr, + enum aarch64_insn_condition cond); u32 aarch64_insn_gen_hint(enum aarch64_insn_hint_op op); u32 aarch64_insn_gen_nop(void); +u32 aarch64_insn_gen_branch_reg(enum aarch64_insn_register reg, + enum aarch64_insn_branch_type type); +u32 aarch64_insn_gen_load_store_reg(enum aarch64_insn_register reg, + enum aarch64_insn_register base, + enum aarch64_insn_register offset, + enum aarch64_insn_size_type size, + enum aarch64_insn_ldst_type type); +u32 aarch64_insn_gen_load_store_pair(enum aarch64_insn_register reg1, + enum aarch64_insn_register reg2, + enum aarch64_insn_register base, + int offset, + enum aarch64_insn_variant variant, + enum aarch64_insn_ldst_type type); +u32 aarch64_insn_gen_add_sub_imm(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + int imm, enum aarch64_insn_variant variant, + enum aarch64_insn_adsb_type type); +u32 aarch64_insn_gen_bitfield(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + int immr, int imms, + enum aarch64_insn_variant variant, + enum aarch64_insn_bitfield_type type); +u32 aarch64_insn_gen_movewide(enum aarch64_insn_register dst, + int imm, int shift, + enum aarch64_insn_variant variant, + enum aarch64_insn_movewide_type type); +u32 aarch64_insn_gen_add_sub_shifted_reg(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_register reg, + int shift, + enum aarch64_insn_variant variant, + enum aarch64_insn_adsb_type type); +u32 aarch64_insn_gen_data1(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_variant variant, + enum aarch64_insn_data1_type type); +u32 aarch64_insn_gen_data2(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_register reg, + enum aarch64_insn_variant variant, + enum aarch64_insn_data2_type type); +u32 aarch64_insn_gen_data3(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_register reg1, + enum aarch64_insn_register reg2, + enum aarch64_insn_variant variant, + enum aarch64_insn_data3_type type); +u32 aarch64_insn_gen_logical_shifted_reg(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_register reg, + int shift, + enum aarch64_insn_variant variant, + enum aarch64_insn_logic_type type); bool aarch64_insn_hotpatch_safe(u32 old_insn, u32 new_insn);
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index e0ecdcf..79f1d519 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h
@@ -121,7 +121,8 @@ /* * I/O port access primitives. */ -#define IO_SPACE_LIMIT 0xffff +#define arch_has_dev_port() (1) +#define IO_SPACE_LIMIT (SZ_32M - 1) #define PCI_IOBASE ((void __iomem *)(MODULES_VADDR - SZ_32M)) static inline u8 inb(unsigned long addr) @@ -243,7 +244,7 @@ * (PHYS_OFFSET and PHYS_MASK taken into account). */ #define ARCH_HAS_VALID_PHYS_ADDR_RANGE -extern int valid_phys_addr_range(unsigned long addr, size_t size); +extern int valid_phys_addr_range(phys_addr_t addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); extern int devmem_is_allowed(unsigned long pfn);
diff --git a/arch/arm64/include/asm/irq_work.h b/arch/arm64/include/asm/irq_work.h new file mode 100644 index 0000000..b4f6b19 --- /dev/null +++ b/arch/arm64/include/asm/irq_work.h
@@ -0,0 +1,22 @@ +#ifndef __ASM_IRQ_WORK_H +#define __ASM_IRQ_WORK_H + +#ifdef CONFIG_SMP + +#include <asm/smp.h> + +static inline bool arch_irq_work_has_interrupt(void) +{ + return !!__smp_cross_call; +} + +#else + +static inline bool arch_irq_work_has_interrupt(void) +{ + return false; +} + +#endif + +#endif /* __ASM_IRQ_WORK_H */
diff --git a/arch/arm64/include/asm/kgdb.h b/arch/arm64/include/asm/kgdb.h index 3c8aafc..f69f69c 100644 --- a/arch/arm64/include/asm/kgdb.h +++ b/arch/arm64/include/asm/kgdb.h
@@ -29,7 +29,7 @@ static inline void arch_kgdb_breakpoint(void) { - asm ("brk %0" : : "I" (KDBG_COMPILED_DBG_BRK_IMM)); + asm ("brk %0" : : "I" (KGDB_COMPILED_DBG_BRK_IMM)); } extern void kgdb_handle_bus_error(void);
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index cc83520..7fd3e27 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h
@@ -122,6 +122,17 @@ #define VTCR_EL2_T0SZ_MASK 0x3f #define VTCR_EL2_T0SZ_40B 24 +/* + * We configure the Stage-2 page tables to always restrict the IPA space to be + * 40 bits wide (T0SZ = 24). Systems with a PARange smaller than 40 bits are + * not known to exist and will break with this configuration. + * + * Note that when using 4K pages, we concatenate two first level page tables + * together. + * + * The magic numbers used for VTTBR_X in this patch can be found in Tables + * D4-23 and D4-25 in ARM DDI 0487A.b. + */ #ifdef CONFIG_ARM64_64K_PAGES /* * Stage2 translation configuration: @@ -149,7 +160,7 @@ #endif #define VTTBR_BADDR_SHIFT (VTTBR_X - 1) -#define VTTBR_BADDR_MASK (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT) +#define VTTBR_BADDR_MASK (((1LLU << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT) #define VTTBR_VMID_SHIFT (48LLU) #define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT)
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index fdc3e21..5674a55 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -174,6 +174,11 @@ static inline u8 kvm_vcpu_trap_get_fault(const struct kvm_vcpu *vcpu) { + return kvm_vcpu_get_hsr(vcpu) & ESR_EL2_FSC; +} + +static inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vcpu) +{ return kvm_vcpu_get_hsr(vcpu) & ESR_EL2_FSC_TYPE; }
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index e10c45a..2012c4b 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h
@@ -22,6 +22,8 @@ #ifndef __ARM64_KVM_HOST_H__ #define __ARM64_KVM_HOST_H__ +#include <linux/types.h> +#include <linux/kvm_types.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> @@ -41,8 +43,7 @@ #define KVM_VCPU_MAX_FEATURES 3 -struct kvm_vcpu; -int kvm_target_cpu(void); +int __attribute_const__ kvm_target_cpu(void); int kvm_reset_vcpu(struct kvm_vcpu *vcpu); int kvm_arch_dev_ioctl_check_extension(long ext); @@ -164,25 +165,23 @@ u32 halt_wakeup; }; -struct kvm_vcpu_init; int kvm_vcpu_set_target(struct kvm_vcpu *vcpu, const struct kvm_vcpu_init *init); int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init); unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); -struct kvm_one_reg; int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); #define KVM_ARCH_WANT_MMU_NOTIFIER -struct kvm; int kvm_unmap_hva(struct kvm *kvm, unsigned long hva); int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end); void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); /* We do not have shadow page tables, hence the empty hooks */ -static inline int kvm_age_hva(struct kvm *kvm, unsigned long hva) +static inline int kvm_age_hva(struct kvm *kvm, unsigned long start, + unsigned long end) { return 0; } @@ -192,8 +191,13 @@ return 0; } +static inline void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm, + unsigned long address) +{ +} + struct kvm_vcpu *kvm_arm_get_running_vcpu(void); -struct kvm_vcpu __percpu **kvm_get_running_vcpus(void); +struct kvm_vcpu * __percpu *kvm_get_running_vcpus(void); u64 kvm_call_hyp(void *hypfn, ...); @@ -244,4 +248,10 @@ } } +static inline void kvm_arch_hardware_disable(void) {} +static inline void kvm_arch_hardware_unsetup(void) {} +static inline void kvm_arch_sync_events(struct kvm *kvm) {} +static inline void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) {} +static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {} + #endif /* __ARM64_KVM_HOST_H__ */
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index 8e138c7..0caf7a5 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -41,6 +41,18 @@ */ #define TRAMPOLINE_VA (HYP_PAGE_OFFSET_MASK & PAGE_MASK) +/* + * KVM_MMU_CACHE_MIN_PAGES is the number of stage2 page table translation + * levels in addition to the PGD and potentially the PUD which are + * pre-allocated (we pre-allocate the fake PGD and the PUD when the Stage-2 + * tables use one level of tables less than the kernel. + */ +#ifdef CONFIG_ARM64_64K_PAGES +#define KVM_MMU_CACHE_MIN_PAGES 1 +#else +#define KVM_MMU_CACHE_MIN_PAGES 2 +#endif + #ifdef __ASSEMBLY__ /* @@ -53,23 +65,19 @@ #else +#include <asm/pgalloc.h> #include <asm/cachetype.h> #include <asm/cacheflush.h> #define KERN_TO_HYP(kva) ((unsigned long)kva - PAGE_OFFSET + HYP_PAGE_OFFSET) /* - * Align KVM with the kernel's view of physical memory. Should be - * 40bit IPA, with PGD being 8kB aligned in the 4KB page configuration. + * We currently only support a 40bit IPA. */ -#define KVM_PHYS_SHIFT PHYS_MASK_SHIFT +#define KVM_PHYS_SHIFT (40) #define KVM_PHYS_SIZE (1UL << KVM_PHYS_SHIFT) #define KVM_PHYS_MASK (KVM_PHYS_SIZE - 1UL) -/* Make sure we get the right size, and thus the right alignment */ -#define PTRS_PER_S2_PGD (1 << (KVM_PHYS_SHIFT - PGDIR_SHIFT)) -#define S2_PGD_ORDER get_order(PTRS_PER_S2_PGD * sizeof(pgd_t)) - int create_hyp_mappings(void *from, void *to); int create_hyp_io_mappings(void *from, void *to, phys_addr_t); void free_boot_hyp_pgd(void); @@ -78,7 +86,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm); void kvm_free_stage2_pgd(struct kvm *kvm); int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, - phys_addr_t pa, unsigned long size); + phys_addr_t pa, unsigned long size, bool writable); int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run); @@ -93,20 +101,8 @@ #define kvm_set_pte(ptep, pte) set_pte(ptep, pte) #define kvm_set_pmd(pmdp, pmd) set_pmd(pmdp, pmd) -static inline bool kvm_is_write_fault(unsigned long esr) -{ - unsigned long esr_ec = esr >> ESR_EL2_EC_SHIFT; - - if (esr_ec == ESR_EL2_EC_IABT) - return false; - - if ((esr & ESR_EL2_ISV) && !(esr & ESR_EL2_WNR)) - return false; - - return true; -} - static inline void kvm_clean_pgd(pgd_t *pgd) {} +static inline void kvm_clean_pmd(pmd_t *pmd) {} static inline void kvm_clean_pmd_entry(pmd_t *pmd) {} static inline void kvm_clean_pte(pte_t *pte) {} static inline void kvm_clean_pte_entry(pte_t *pte) {} @@ -125,19 +121,116 @@ #define kvm_pud_addr_end(addr, end) pud_addr_end(addr, end) #define kvm_pmd_addr_end(addr, end) pmd_addr_end(addr, end) +/* + * In the case where PGDIR_SHIFT is larger than KVM_PHYS_SHIFT, we can address + * the entire IPA input range with a single pgd entry, and we would only need + * one pgd entry. Note that in this case, the pgd is actually not used by + * the MMU for Stage-2 translations, but is merely a fake pgd used as a data + * structure for the kernel pgtable macros to work. + */ +#if PGDIR_SHIFT > KVM_PHYS_SHIFT +#define PTRS_PER_S2_PGD_SHIFT 0 +#else +#define PTRS_PER_S2_PGD_SHIFT (KVM_PHYS_SHIFT - PGDIR_SHIFT) +#endif +#define PTRS_PER_S2_PGD (1 << PTRS_PER_S2_PGD_SHIFT) +#define S2_PGD_ORDER get_order(PTRS_PER_S2_PGD * sizeof(pgd_t)) + +/* + * If we are concatenating first level stage-2 page tables, we would have less + * than or equal to 16 pointers in the fake PGD, because that's what the + * architecture allows. In this case, (4 - CONFIG_ARM64_PGTABLE_LEVELS) + * represents the first level for the host, and we add 1 to go to the next + * level (which uses contatenation) for the stage-2 tables. + */ +#if PTRS_PER_S2_PGD <= 16 +#define KVM_PREALLOC_LEVEL (4 - CONFIG_ARM64_PGTABLE_LEVELS + 1) +#else +#define KVM_PREALLOC_LEVEL (0) +#endif + +/** + * kvm_prealloc_hwpgd - allocate inital table for VTTBR + * @kvm: The KVM struct pointer for the VM. + * @pgd: The kernel pseudo pgd + * + * When the kernel uses more levels of page tables than the guest, we allocate + * a fake PGD and pre-populate it to point to the next-level page table, which + * will be the real initial page table pointed to by the VTTBR. + * + * When KVM_PREALLOC_LEVEL==2, we allocate a single page for the PMD and + * the kernel will use folded pud. When KVM_PREALLOC_LEVEL==1, we + * allocate 2 consecutive PUD pages. + */ +static inline int kvm_prealloc_hwpgd(struct kvm *kvm, pgd_t *pgd) +{ + unsigned int i; + unsigned long hwpgd; + + if (KVM_PREALLOC_LEVEL == 0) + return 0; + + hwpgd = __get_free_pages(GFP_KERNEL | __GFP_ZERO, PTRS_PER_S2_PGD_SHIFT); + if (!hwpgd) + return -ENOMEM; + + for (i = 0; i < PTRS_PER_S2_PGD; i++) { + if (KVM_PREALLOC_LEVEL == 1) + pgd_populate(NULL, pgd + i, + (pud_t *)hwpgd + i * PTRS_PER_PUD); + else if (KVM_PREALLOC_LEVEL == 2) + pud_populate(NULL, pud_offset(pgd, 0) + i, + (pmd_t *)hwpgd + i * PTRS_PER_PMD); + } + + return 0; +} + +static inline void *kvm_get_hwpgd(struct kvm *kvm) +{ + pgd_t *pgd = kvm->arch.pgd; + pud_t *pud; + + if (KVM_PREALLOC_LEVEL == 0) + return pgd; + + pud = pud_offset(pgd, 0); + if (KVM_PREALLOC_LEVEL == 1) + return pud; + + BUG_ON(KVM_PREALLOC_LEVEL != 2); + return pmd_offset(pud, 0); +} + +static inline void kvm_free_hwpgd(struct kvm *kvm) +{ + if (KVM_PREALLOC_LEVEL > 0) { + unsigned long hwpgd = (unsigned long)kvm_get_hwpgd(kvm); + free_pages(hwpgd, PTRS_PER_S2_PGD_SHIFT); + } +} + static inline bool kvm_page_empty(void *ptr) { struct page *ptr_page = virt_to_page(ptr); return page_count(ptr_page) == 1; } -#define kvm_pte_table_empty(ptep) kvm_page_empty(ptep) -#ifndef CONFIG_ARM64_64K_PAGES -#define kvm_pmd_table_empty(pmdp) kvm_page_empty(pmdp) +#define kvm_pte_table_empty(kvm, ptep) kvm_page_empty(ptep) + +#ifdef __PAGETABLE_PMD_FOLDED +#define kvm_pmd_table_empty(kvm, pmdp) (0) #else -#define kvm_pmd_table_empty(pmdp) (0) +#define kvm_pmd_table_empty(kvm, pmdp) \ + (kvm_page_empty(pmdp) && (!(kvm) || KVM_PREALLOC_LEVEL < 2)) #endif -#define kvm_pud_table_empty(pudp) (0) + +#ifdef __PAGETABLE_PUD_FOLDED +#define kvm_pud_table_empty(kvm, pudp) (0) +#else +#define kvm_pud_table_empty(kvm, pudp) \ + (kvm_page_empty(pudp) && (!(kvm) || KVM_PREALLOC_LEVEL < 1)) +#endif struct kvm;
diff --git a/arch/arm64/include/asm/pci.h b/arch/arm64/include/asm/pci.h new file mode 100644 index 0000000..872ba93 --- /dev/null +++ b/arch/arm64/include/asm/pci.h
@@ -0,0 +1,37 @@ +#ifndef __ASM_PCI_H +#define __ASM_PCI_H +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> +#include <asm-generic/pci-bridge.h> +#include <asm-generic/pci-dma-compat.h> + +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0 + +/* + * Set to 1 if the kernel should re-assign all PCI bus numbers + */ +#define pcibios_assign_all_busses() \ + (pci_has_flag(PCI_REASSIGN_ALL_BUS)) + +/* + * PCI address space differs from physical memory address space + */ +#define PCI_DMA_BUS_IS_PHYS (0) + +extern int isa_dma_bridge_buggy; + +#ifdef CONFIG_PCI +static inline int pci_proc_domain(struct pci_bus *bus) +{ + return 1; +} +#endif /* CONFIG_PCI */ + +#endif /* __KERNEL__ */ +#endif /* __ASM_PCI_H */
diff --git a/arch/arm64/include/asm/percpu.h b/arch/arm64/include/asm/percpu.h index 453a179..5279e57 100644 --- a/arch/arm64/include/asm/percpu.h +++ b/arch/arm64/include/asm/percpu.h
@@ -26,13 +26,13 @@ static inline unsigned long __my_cpu_offset(void) { unsigned long off; - register unsigned long *sp asm ("sp"); /* * We want to allow caching the value, so avoid using volatile and * instead use a fake stack read to hazard against barrier(). */ - asm("mrs %0, tpidr_el1" : "=r" (off) : "Q" (*sp)); + asm("mrs %0, tpidr_el1" : "=r" (off) : + "Q" (*(const unsigned long *)current_stack_pointer)); return off; }
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index ffe1ba0..41a43bf 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h
@@ -79,7 +79,7 @@ #define PAGE_HYP_DEVICE __pgprot(PROT_DEVICE_nGnRE | PTE_HYP) #define PAGE_S2 __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY) -#define PAGE_S2_DEVICE __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDWR | PTE_UXN) +#define PAGE_S2_DEVICE __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN) #define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE | PTE_PXN | PTE_UXN) #define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) @@ -149,46 +149,51 @@ #define pte_valid_not_user(pte) \ ((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID) +static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot) +{ + pte_val(pte) &= ~pgprot_val(prot); + return pte; +} + +static inline pte_t set_pte_bit(pte_t pte, pgprot_t prot) +{ + pte_val(pte) |= pgprot_val(prot); + return pte; +} + static inline pte_t pte_wrprotect(pte_t pte) { - pte_val(pte) &= ~PTE_WRITE; - return pte; + return clear_pte_bit(pte, __pgprot(PTE_WRITE)); } static inline pte_t pte_mkwrite(pte_t pte) { - pte_val(pte) |= PTE_WRITE; - return pte; + return set_pte_bit(pte, __pgprot(PTE_WRITE)); } static inline pte_t pte_mkclean(pte_t pte) { - pte_val(pte) &= ~PTE_DIRTY; - return pte; + return clear_pte_bit(pte, __pgprot(PTE_DIRTY)); } static inline pte_t pte_mkdirty(pte_t pte) { - pte_val(pte) |= PTE_DIRTY; - return pte; + return set_pte_bit(pte, __pgprot(PTE_DIRTY)); } static inline pte_t pte_mkold(pte_t pte) { - pte_val(pte) &= ~PTE_AF; - return pte; + return clear_pte_bit(pte, __pgprot(PTE_AF)); } static inline pte_t pte_mkyoung(pte_t pte) { - pte_val(pte) |= PTE_AF; - return pte; + return set_pte_bit(pte, __pgprot(PTE_AF)); } static inline pte_t pte_mkspecial(pte_t pte) { - pte_val(pte) |= PTE_SPECIAL; - return pte; + return set_pte_bit(pte, __pgprot(PTE_SPECIAL)); } static inline void set_pte(pte_t *ptep, pte_t pte) @@ -239,6 +244,16 @@ #define __HAVE_ARCH_PTE_SPECIAL +static inline pte_t pud_pte(pud_t pud) +{ + return __pte(pud_val(pud)); +} + +static inline pmd_t pud_pmd(pud_t pud) +{ + return __pmd(pud_val(pud)); +} + static inline pte_t pmd_pte(pmd_t pmd) { return __pte(pmd_val(pmd)); @@ -256,7 +271,13 @@ #ifdef CONFIG_TRANSPARENT_HUGEPAGE #define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT)) #define pmd_trans_splitting(pmd) pte_special(pmd_pte(pmd)) -#endif +#ifdef CONFIG_HAVE_RCU_TABLE_FREE +#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH +struct vm_area_struct; +void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address, + pmd_t *pmdp); +#endif /* CONFIG_HAVE_RCU_TABLE_FREE */ +#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ #define pmd_young(pmd) pte_young(pmd_pte(pmd)) #define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd))) @@ -277,6 +298,7 @@ #define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot) #define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) +#define pud_write(pud) pte_write(pud_pte(pud)) #define pud_pfn(pud) (((pud_val(pud) & PUD_MASK) & PHYS_MASK) >> PAGE_SHIFT) #define set_pmd_at(mm, addr, pmdp, pmd) set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd)) @@ -296,6 +318,8 @@ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE) | PTE_PXN | PTE_UXN) #define pgprot_writecombine(prot) \ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN) +#define pgprot_device(prot) \ + __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_PXN | PTE_UXN) #define __HAVE_PHYS_MEM_ACCESS_PROT struct file; extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, @@ -376,6 +400,8 @@ return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr); } +#define pud_page(pud) pmd_page(pud_pmd(pud)) + #endif /* CONFIG_ARM64_PGTABLE_LEVELS > 2 */ #if CONFIG_ARM64_PGTABLE_LEVELS > 3
diff --git a/arch/arm64/include/asm/proc-fns.h b/arch/arm64/include/asm/proc-fns.h index 0c657bb..9a8fd84 100644 --- a/arch/arm64/include/asm/proc-fns.h +++ b/arch/arm64/include/asm/proc-fns.h
@@ -32,6 +32,8 @@ extern void cpu_do_idle(void); extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); +void cpu_soft_restart(phys_addr_t cpu_reset, + unsigned long addr) __attribute__((noreturn)); extern void cpu_do_suspend(struct cpu_suspend_ctx *ptr); extern u64 cpu_do_resume(phys_addr_t ptr, u64 idmap_ttbr);
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h index a498f2c..780f82c 100644 --- a/arch/arm64/include/asm/smp.h +++ b/arch/arm64/include/asm/smp.h
@@ -48,6 +48,8 @@ */ extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int)); +extern void (*__smp_cross_call)(const struct cpumask *, unsigned int); + /* * Called from the secondary holding pen, this is the secondary CPU entry point. */
diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h index e9c149c..456d67c 100644 --- a/arch/arm64/include/asm/suspend.h +++ b/arch/arm64/include/asm/suspend.h
@@ -21,6 +21,7 @@ phys_addr_t save_ptr_stash_phys; }; +extern int __cpu_suspend(unsigned long arg, int (*fn)(unsigned long)); extern void cpu_resume(void); extern int cpu_suspend(unsigned long);
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index 45108d8..459bf8e 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h
@@ -69,14 +69,19 @@ #define init_stack (init_thread_union.stack) /* + * how to get the current stack pointer from C + */ +register unsigned long current_stack_pointer asm ("sp"); + +/* * how to get the thread information struct from C */ static inline struct thread_info *current_thread_info(void) __attribute_const__; static inline struct thread_info *current_thread_info(void) { - register unsigned long sp asm ("sp"); - return (struct thread_info *)(sp & ~(THREAD_SIZE - 1)); + return (struct thread_info *) + (current_stack_pointer & ~(THREAD_SIZE - 1)); } #define thread_saved_pc(tsk) \
diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index 62731ef..a82c0c5 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h
@@ -23,6 +23,20 @@ #include <asm-generic/tlb.h> +#include <linux/pagemap.h> +#include <linux/swap.h> + +#ifdef CONFIG_HAVE_RCU_TABLE_FREE + +#define tlb_remove_entry(tlb, entry) tlb_remove_table(tlb, entry) +static inline void __tlb_remove_table(void *_table) +{ + free_page_and_swap_cache((struct page *)_table); +} +#else +#define tlb_remove_entry(tlb, entry) tlb_remove_page(tlb, entry) +#endif /* CONFIG_HAVE_RCU_TABLE_FREE */ + /* * There's three ways the TLB shootdown code is used: * 1. Unmapping a range of vmas. See zap_page_range(), unmap_region(). @@ -88,7 +102,7 @@ { pgtable_page_dtor(pte); tlb_add_flush(tlb, addr); - tlb_remove_page(tlb, pte); + tlb_remove_entry(tlb, pte); } #if CONFIG_ARM64_PGTABLE_LEVELS > 2 @@ -96,7 +110,7 @@ unsigned long addr) { tlb_add_flush(tlb, addr); - tlb_remove_page(tlb, virt_to_page(pmdp)); + tlb_remove_entry(tlb, virt_to_page(pmdp)); } #endif @@ -105,7 +119,7 @@ unsigned long addr) { tlb_add_flush(tlb, addr); - tlb_remove_page(tlb, virt_to_page(pudp)); + tlb_remove_entry(tlb, virt_to_page(pudp)); } #endif
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h index e633ff8..8e38878 100644 --- a/arch/arm64/include/uapi/asm/kvm.h +++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -37,6 +37,7 @@ #define __KVM_HAVE_GUEST_DEBUG #define __KVM_HAVE_IRQ_LINE +#define __KVM_HAVE_READONLY_MEM #define KVM_REG_SIZE(id) \ (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) @@ -159,6 +160,7 @@ #define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 /* KVM_IRQ_LINE irq field index values */ #define KVM_ARM_IRQ_TYPE_SHIFT 24
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index df7ef87..5bd029b 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile
@@ -26,9 +26,11 @@ arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o +arm64-obj-$(CONFIG_CPU_IDLE) += cpuidle.o arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o arm64-obj-$(CONFIG_KGDB) += kgdb.o arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o +arm64-obj-$(CONFIG_PCI) += pci.o obj-y += $(arm64-obj-y) vdso/ obj-m += $(arm64-obj-m)
diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c new file mode 100644 index 0000000..19d17f5 --- /dev/null +++ b/arch/arm64/kernel/cpuidle.c
@@ -0,0 +1,31 @@ +/* + * ARM64 CPU idle arch support + * + * Copyright (C) 2014 ARM Ltd. + * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/of.h> +#include <linux/of_device.h> + +#include <asm/cpuidle.h> +#include <asm/cpu_ops.h> + +int cpu_init_idle(unsigned int cpu) +{ + int ret = -EOPNOTSUPP; + struct device_node *cpu_node = of_cpu_device_node_get(cpu); + + if (!cpu_node) + return -ENODEV; + + if (cpu_ops[cpu] && cpu_ops[cpu]->cpu_init_idle) + ret = cpu_ops[cpu]->cpu_init_idle(cpu_node, cpu); + + of_node_put(cpu_node); + return ret; +}
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index 1771696..504fdaa 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c
@@ -20,8 +20,10 @@ #include <asm/cputype.h> #include <linux/bitops.h> +#include <linux/bug.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/preempt.h> #include <linux/printk.h> #include <linux/smp.h> @@ -47,8 +49,18 @@ unsigned int cpu = smp_processor_id(); u32 l1ip = CTR_L1IP(info->reg_ctr); - if (l1ip != ICACHE_POLICY_PIPT) - set_bit(ICACHEF_ALIASING, &__icache_flags); + if (l1ip != ICACHE_POLICY_PIPT) { + /* + * VIPT caches are non-aliasing if the VA always equals the PA + * in all bit positions that are covered by the index. This is + * the case if the size of a way (# of sets * line size) does + * not exceed PAGE_SIZE. + */ + u32 waysize = icache_get_numsets() * icache_get_linesize(); + + if (l1ip != ICACHE_POLICY_VIPT || waysize > PAGE_SIZE) + set_bit(ICACHEF_ALIASING, &__icache_flags); + } if (l1ip == ICACHE_POLICY_AIVIVT) set_bit(ICACHEF_AIVIVT, &__icache_flags); @@ -190,3 +202,15 @@ boot_cpu_data = *info; } + +u64 __attribute_const__ icache_get_ccsidr(void) +{ + u64 ccsidr; + + WARN_ON(preemptible()); + + /* Select L1 I-cache and read its size ID register */ + asm("msr csselr_el1, %1; isb; mrs %0, ccsidr_el1" + : "=r"(ccsidr) : "r"(1L)); + return ccsidr; +}
diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c index 1317fef..d27dd98 100644 --- a/arch/arm64/kernel/efi-stub.c +++ b/arch/arm64/kernel/efi-stub.c
@@ -28,20 +28,16 @@ kernel_size = _edata - _text; if (*image_addr != (dram_base + TEXT_OFFSET)) { kernel_memsize = kernel_size + (_end - _edata); - status = efi_relocate_kernel(sys_table, image_addr, - kernel_size, kernel_memsize, - dram_base + TEXT_OFFSET, - PAGE_SIZE); + status = efi_low_alloc(sys_table, kernel_memsize + TEXT_OFFSET, + SZ_2M, reserve_addr); if (status != EFI_SUCCESS) { pr_efi_err(sys_table, "Failed to relocate kernel\n"); return status; } - if (*image_addr != (dram_base + TEXT_OFFSET)) { - pr_efi_err(sys_table, "Failed to alloc kernel memory\n"); - efi_free(sys_table, kernel_memsize, *image_addr); - return EFI_LOAD_ERROR; - } - *image_size = kernel_memsize; + memcpy((void *)*reserve_addr + TEXT_OFFSET, (void *)*image_addr, + kernel_size); + *image_addr = *reserve_addr + TEXT_OFFSET; + *reserve_size = kernel_memsize + TEXT_OFFSET; }
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c index 03aaa99..95c49eb 100644 --- a/arch/arm64/kernel/efi.c +++ b/arch/arm64/kernel/efi.c
@@ -89,7 +89,8 @@ */ if (efi.systab->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) { pr_err("System table signature incorrect\n"); - return -EINVAL; + retval = -EINVAL; + goto out; } if ((efi.systab->hdr.revision >> 16) < 2) pr_warn("Warning: EFI system table version %d.%02d, expected 2.00 or greater\n", @@ -103,6 +104,7 @@ for (i = 0; i < (int) sizeof(vendor) - 1 && *c16; ++i) vendor[i] = c16[i]; vendor[i] = '\0'; + early_memunmap(c16, sizeof(vendor)); } pr_info("EFI v%u.%.02u by %s\n", @@ -113,29 +115,11 @@ if (retval == 0) set_bit(EFI_CONFIG_TABLES, &efi.flags); - early_memunmap(c16, sizeof(vendor)); +out: early_memunmap(efi.systab, sizeof(efi_system_table_t)); - return retval; } -static __initdata char memory_type_name[][32] = { - {"Reserved"}, - {"Loader Code"}, - {"Loader Data"}, - {"Boot Code"}, - {"Boot Data"}, - {"Runtime Code"}, - {"Runtime Data"}, - {"Conventional Memory"}, - {"Unusable Memory"}, - {"ACPI Reclaim Memory"}, - {"ACPI Memory NVS"}, - {"Memory Mapped I/O"}, - {"MMIO Port Space"}, - {"PAL Code"}, -}; - /* * Return true for RAM regions we want to permanently reserve. */ @@ -166,10 +150,13 @@ paddr = md->phys_addr; npages = md->num_pages; - if (uefi_debug) - pr_info(" 0x%012llx-0x%012llx [%s]", + if (uefi_debug) { + char buf[64]; + + pr_info(" 0x%012llx-0x%012llx %s", paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1, - memory_type_name[md->type]); + efi_md_typeattr_format(buf, sizeof(buf), md)); + } memrange_efi_to_native(&paddr, &npages); size = npages << PAGE_SHIFT; @@ -393,11 +380,16 @@ return -1; } - pr_info("Remapping and enabling EFI services.\n"); - - /* replace early memmap mapping with permanent mapping */ mapsize = memmap.map_end - memmap.map; early_memunmap(memmap.map, mapsize); + + if (efi_runtime_disabled()) { + pr_info("EFI runtime services will be disabled.\n"); + return -1; + } + + pr_info("Remapping and enabling EFI services.\n"); + /* replace early memmap mapping with permanent mapping */ memmap.map = (__force void *)ioremap_cache((phys_addr_t)memmap.phys_map, mapsize); memmap.map_end = memmap.map + mapsize;
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index f0b5e51..726b910 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S
@@ -324,7 +324,6 @@ mrs x0, far_el1 mov x2, sp // struct pt_regs bl do_debug_exception - enable_dbg kernel_exit 1 el1_inv: // TODO: add support for undefined instructions in kernel mode
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index 7924d73..cf8556a 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c
@@ -58,7 +58,8 @@ u32 new; pc = (unsigned long)&ftrace_call; - new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func, true); + new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func, + AARCH64_INSN_BRANCH_LINK); return ftrace_modify_code(pc, 0, new, false); } @@ -72,7 +73,7 @@ u32 old, new; old = aarch64_insn_gen_nop(); - new = aarch64_insn_gen_branch_imm(pc, addr, true); + new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK); return ftrace_modify_code(pc, old, new, true); } @@ -86,7 +87,7 @@ unsigned long pc = rec->ip; u32 old, new; - old = aarch64_insn_gen_branch_imm(pc, addr, true); + old = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK); new = aarch64_insn_gen_nop(); return ftrace_modify_code(pc, old, new, true); @@ -154,7 +155,8 @@ u32 branch, nop; branch = aarch64_insn_gen_branch_imm(pc, - (unsigned long)ftrace_graph_caller, false); + (unsigned long)ftrace_graph_caller, + AARCH64_INSN_BRANCH_LINK); nop = aarch64_insn_gen_nop(); if (enable)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 8730690..0a6e4f9 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S
@@ -151,7 +151,7 @@ .short 0x20b // PE32+ format .byte 0x02 // MajorLinkerVersion .byte 0x14 // MinorLinkerVersion - .long _edata - stext // SizeOfCode + .long _end - stext // SizeOfCode .long 0 // SizeOfInitializedData .long 0 // SizeOfUninitializedData .long efi_stub_entry - efi_head // AddressOfEntryPoint @@ -169,7 +169,7 @@ .short 0 // MinorSubsystemVersion .long 0 // Win32VersionValue - .long _edata - efi_head // SizeOfImage + .long _end - efi_head // SizeOfImage // Everything before the kernel image is considered part of the header .long stext - efi_head // SizeOfHeaders @@ -216,7 +216,7 @@ .byte 0 .byte 0 .byte 0 // end of 0 padding of section name - .long _edata - stext // VirtualSize + .long _end - stext // VirtualSize .long stext - efi_head // VirtualAddress .long _edata - stext // SizeOfRawData .long stext - efi_head // PointerToRawData
diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c index 92f3683..e007714 100644 --- a/arch/arm64/kernel/insn.c +++ b/arch/arm64/kernel/insn.c
@@ -2,6 +2,8 @@ * Copyright (C) 2013 Huawei Ltd. * Author: Jiang Liu <liuj97@gmail.com> * + * Copyright (C) 2014 Zi Shen Lim <zlim.lnx@gmail.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -20,9 +22,14 @@ #include <linux/smp.h> #include <linux/stop_machine.h> #include <linux/uaccess.h> + #include <asm/cacheflush.h> +#include <asm/debug-monitors.h> #include <asm/insn.h> +#define AARCH64_INSN_SF_BIT BIT(31) +#define AARCH64_INSN_N_BIT BIT(22) + static int aarch64_insn_encoding_class[] = { AARCH64_INSN_CLS_UNKNOWN, AARCH64_INSN_CLS_UNKNOWN, @@ -251,6 +258,19 @@ mask = BIT(9) - 1; shift = 12; break; + case AARCH64_INSN_IMM_7: + mask = BIT(7) - 1; + shift = 15; + break; + case AARCH64_INSN_IMM_6: + case AARCH64_INSN_IMM_S: + mask = BIT(6) - 1; + shift = 10; + break; + case AARCH64_INSN_IMM_R: + mask = BIT(6) - 1; + shift = 16; + break; default: pr_err("aarch64_insn_encode_immediate: unknown immediate encoding %d\n", type); @@ -264,10 +284,76 @@ return insn; } -u32 __kprobes aarch64_insn_gen_branch_imm(unsigned long pc, unsigned long addr, - enum aarch64_insn_branch_type type) +static u32 aarch64_insn_encode_register(enum aarch64_insn_register_type type, + u32 insn, + enum aarch64_insn_register reg) { - u32 insn; + int shift; + + if (reg < AARCH64_INSN_REG_0 || reg > AARCH64_INSN_REG_SP) { + pr_err("%s: unknown register encoding %d\n", __func__, reg); + return 0; + } + + switch (type) { + case AARCH64_INSN_REGTYPE_RT: + case AARCH64_INSN_REGTYPE_RD: + shift = 0; + break; + case AARCH64_INSN_REGTYPE_RN: + shift = 5; + break; + case AARCH64_INSN_REGTYPE_RT2: + case AARCH64_INSN_REGTYPE_RA: + shift = 10; + break; + case AARCH64_INSN_REGTYPE_RM: + shift = 16; + break; + default: + pr_err("%s: unknown register type encoding %d\n", __func__, + type); + return 0; + } + + insn &= ~(GENMASK(4, 0) << shift); + insn |= reg << shift; + + return insn; +} + +static u32 aarch64_insn_encode_ldst_size(enum aarch64_insn_size_type type, + u32 insn) +{ + u32 size; + + switch (type) { + case AARCH64_INSN_SIZE_8: + size = 0; + break; + case AARCH64_INSN_SIZE_16: + size = 1; + break; + case AARCH64_INSN_SIZE_32: + size = 2; + break; + case AARCH64_INSN_SIZE_64: + size = 3; + break; + default: + pr_err("%s: unknown size encoding %d\n", __func__, type); + return 0; + } + + insn &= ~GENMASK(31, 30); + insn |= size << 30; + + return insn; +} + +static inline long branch_imm_common(unsigned long pc, unsigned long addr, + long range) +{ long offset; /* @@ -276,23 +362,97 @@ */ BUG_ON((pc & 0x3) || (addr & 0x3)); + offset = ((long)addr - (long)pc); + BUG_ON(offset < -range || offset >= range); + + return offset; +} + +u32 __kprobes aarch64_insn_gen_branch_imm(unsigned long pc, unsigned long addr, + enum aarch64_insn_branch_type type) +{ + u32 insn; + long offset; + /* * B/BL support [-128M, 128M) offset * ARM64 virtual address arrangement guarantees all kernel and module * texts are within +/-128M. */ - offset = ((long)addr - (long)pc); - BUG_ON(offset < -SZ_128M || offset >= SZ_128M); + offset = branch_imm_common(pc, addr, SZ_128M); - if (type == AARCH64_INSN_BRANCH_LINK) + switch (type) { + case AARCH64_INSN_BRANCH_LINK: insn = aarch64_insn_get_bl_value(); - else + break; + case AARCH64_INSN_BRANCH_NOLINK: insn = aarch64_insn_get_b_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_26, insn, offset >> 2); } +u32 aarch64_insn_gen_comp_branch_imm(unsigned long pc, unsigned long addr, + enum aarch64_insn_register reg, + enum aarch64_insn_variant variant, + enum aarch64_insn_branch_type type) +{ + u32 insn; + long offset; + + offset = branch_imm_common(pc, addr, SZ_1M); + + switch (type) { + case AARCH64_INSN_BRANCH_COMP_ZERO: + insn = aarch64_insn_get_cbz_value(); + break; + case AARCH64_INSN_BRANCH_COMP_NONZERO: + insn = aarch64_insn_get_cbnz_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + break; + case AARCH64_INSN_VARIANT_64BIT: + insn |= AARCH64_INSN_SF_BIT; + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn, reg); + + return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_19, insn, + offset >> 2); +} + +u32 aarch64_insn_gen_cond_branch_imm(unsigned long pc, unsigned long addr, + enum aarch64_insn_condition cond) +{ + u32 insn; + long offset; + + offset = branch_imm_common(pc, addr, SZ_1M); + + insn = aarch64_insn_get_bcond_value(); + + BUG_ON(cond < AARCH64_INSN_COND_EQ || cond > AARCH64_INSN_COND_AL); + insn |= cond; + + return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_19, insn, + offset >> 2); +} + u32 __kprobes aarch64_insn_gen_hint(enum aarch64_insn_hint_op op) { return aarch64_insn_get_hint_value() | op; @@ -302,3 +462,500 @@ { return aarch64_insn_gen_hint(AARCH64_INSN_HINT_NOP); } + +u32 aarch64_insn_gen_branch_reg(enum aarch64_insn_register reg, + enum aarch64_insn_branch_type type) +{ + u32 insn; + + switch (type) { + case AARCH64_INSN_BRANCH_NOLINK: + insn = aarch64_insn_get_br_value(); + break; + case AARCH64_INSN_BRANCH_LINK: + insn = aarch64_insn_get_blr_value(); + break; + case AARCH64_INSN_BRANCH_RETURN: + insn = aarch64_insn_get_ret_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, reg); +} + +u32 aarch64_insn_gen_load_store_reg(enum aarch64_insn_register reg, + enum aarch64_insn_register base, + enum aarch64_insn_register offset, + enum aarch64_insn_size_type size, + enum aarch64_insn_ldst_type type) +{ + u32 insn; + + switch (type) { + case AARCH64_INSN_LDST_LOAD_REG_OFFSET: + insn = aarch64_insn_get_ldr_reg_value(); + break; + case AARCH64_INSN_LDST_STORE_REG_OFFSET: + insn = aarch64_insn_get_str_reg_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + insn = aarch64_insn_encode_ldst_size(size, insn); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn, reg); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, + base); + + return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, + offset); +} + +u32 aarch64_insn_gen_load_store_pair(enum aarch64_insn_register reg1, + enum aarch64_insn_register reg2, + enum aarch64_insn_register base, + int offset, + enum aarch64_insn_variant variant, + enum aarch64_insn_ldst_type type) +{ + u32 insn; + int shift; + + switch (type) { + case AARCH64_INSN_LDST_LOAD_PAIR_PRE_INDEX: + insn = aarch64_insn_get_ldp_pre_value(); + break; + case AARCH64_INSN_LDST_STORE_PAIR_PRE_INDEX: + insn = aarch64_insn_get_stp_pre_value(); + break; + case AARCH64_INSN_LDST_LOAD_PAIR_POST_INDEX: + insn = aarch64_insn_get_ldp_post_value(); + break; + case AARCH64_INSN_LDST_STORE_PAIR_POST_INDEX: + insn = aarch64_insn_get_stp_post_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + /* offset must be multiples of 4 in the range [-256, 252] */ + BUG_ON(offset & 0x3); + BUG_ON(offset < -256 || offset > 252); + shift = 2; + break; + case AARCH64_INSN_VARIANT_64BIT: + /* offset must be multiples of 8 in the range [-512, 504] */ + BUG_ON(offset & 0x7); + BUG_ON(offset < -512 || offset > 504); + shift = 3; + insn |= AARCH64_INSN_SF_BIT; + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn, + reg1); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT2, insn, + reg2); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, + base); + + return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_7, insn, + offset >> shift); +} + +u32 aarch64_insn_gen_add_sub_imm(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + int imm, enum aarch64_insn_variant variant, + enum aarch64_insn_adsb_type type) +{ + u32 insn; + + switch (type) { + case AARCH64_INSN_ADSB_ADD: + insn = aarch64_insn_get_add_imm_value(); + break; + case AARCH64_INSN_ADSB_SUB: + insn = aarch64_insn_get_sub_imm_value(); + break; + case AARCH64_INSN_ADSB_ADD_SETFLAGS: + insn = aarch64_insn_get_adds_imm_value(); + break; + case AARCH64_INSN_ADSB_SUB_SETFLAGS: + insn = aarch64_insn_get_subs_imm_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + break; + case AARCH64_INSN_VARIANT_64BIT: + insn |= AARCH64_INSN_SF_BIT; + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + BUG_ON(imm & ~(SZ_4K - 1)); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src); + + return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_12, insn, imm); +} + +u32 aarch64_insn_gen_bitfield(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + int immr, int imms, + enum aarch64_insn_variant variant, + enum aarch64_insn_bitfield_type type) +{ + u32 insn; + u32 mask; + + switch (type) { + case AARCH64_INSN_BITFIELD_MOVE: + insn = aarch64_insn_get_bfm_value(); + break; + case AARCH64_INSN_BITFIELD_MOVE_UNSIGNED: + insn = aarch64_insn_get_ubfm_value(); + break; + case AARCH64_INSN_BITFIELD_MOVE_SIGNED: + insn = aarch64_insn_get_sbfm_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + mask = GENMASK(4, 0); + break; + case AARCH64_INSN_VARIANT_64BIT: + insn |= AARCH64_INSN_SF_BIT | AARCH64_INSN_N_BIT; + mask = GENMASK(5, 0); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + BUG_ON(immr & ~mask); + BUG_ON(imms & ~mask); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src); + + insn = aarch64_insn_encode_immediate(AARCH64_INSN_IMM_R, insn, immr); + + return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_S, insn, imms); +} + +u32 aarch64_insn_gen_movewide(enum aarch64_insn_register dst, + int imm, int shift, + enum aarch64_insn_variant variant, + enum aarch64_insn_movewide_type type) +{ + u32 insn; + + switch (type) { + case AARCH64_INSN_MOVEWIDE_ZERO: + insn = aarch64_insn_get_movz_value(); + break; + case AARCH64_INSN_MOVEWIDE_KEEP: + insn = aarch64_insn_get_movk_value(); + break; + case AARCH64_INSN_MOVEWIDE_INVERSE: + insn = aarch64_insn_get_movn_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + BUG_ON(imm & ~(SZ_64K - 1)); + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + BUG_ON(shift != 0 && shift != 16); + break; + case AARCH64_INSN_VARIANT_64BIT: + insn |= AARCH64_INSN_SF_BIT; + BUG_ON(shift != 0 && shift != 16 && shift != 32 && + shift != 48); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + insn |= (shift >> 4) << 21; + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst); + + return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_16, insn, imm); +} + +u32 aarch64_insn_gen_add_sub_shifted_reg(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_register reg, + int shift, + enum aarch64_insn_variant variant, + enum aarch64_insn_adsb_type type) +{ + u32 insn; + + switch (type) { + case AARCH64_INSN_ADSB_ADD: + insn = aarch64_insn_get_add_value(); + break; + case AARCH64_INSN_ADSB_SUB: + insn = aarch64_insn_get_sub_value(); + break; + case AARCH64_INSN_ADSB_ADD_SETFLAGS: + insn = aarch64_insn_get_adds_value(); + break; + case AARCH64_INSN_ADSB_SUB_SETFLAGS: + insn = aarch64_insn_get_subs_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + BUG_ON(shift & ~(SZ_32 - 1)); + break; + case AARCH64_INSN_VARIANT_64BIT: + insn |= AARCH64_INSN_SF_BIT; + BUG_ON(shift & ~(SZ_64 - 1)); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, reg); + + return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_6, insn, shift); +} + +u32 aarch64_insn_gen_data1(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_variant variant, + enum aarch64_insn_data1_type type) +{ + u32 insn; + + switch (type) { + case AARCH64_INSN_DATA1_REVERSE_16: + insn = aarch64_insn_get_rev16_value(); + break; + case AARCH64_INSN_DATA1_REVERSE_32: + insn = aarch64_insn_get_rev32_value(); + break; + case AARCH64_INSN_DATA1_REVERSE_64: + BUG_ON(variant != AARCH64_INSN_VARIANT_64BIT); + insn = aarch64_insn_get_rev64_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + break; + case AARCH64_INSN_VARIANT_64BIT: + insn |= AARCH64_INSN_SF_BIT; + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst); + + return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src); +} + +u32 aarch64_insn_gen_data2(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_register reg, + enum aarch64_insn_variant variant, + enum aarch64_insn_data2_type type) +{ + u32 insn; + + switch (type) { + case AARCH64_INSN_DATA2_UDIV: + insn = aarch64_insn_get_udiv_value(); + break; + case AARCH64_INSN_DATA2_SDIV: + insn = aarch64_insn_get_sdiv_value(); + break; + case AARCH64_INSN_DATA2_LSLV: + insn = aarch64_insn_get_lslv_value(); + break; + case AARCH64_INSN_DATA2_LSRV: + insn = aarch64_insn_get_lsrv_value(); + break; + case AARCH64_INSN_DATA2_ASRV: + insn = aarch64_insn_get_asrv_value(); + break; + case AARCH64_INSN_DATA2_RORV: + insn = aarch64_insn_get_rorv_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + break; + case AARCH64_INSN_VARIANT_64BIT: + insn |= AARCH64_INSN_SF_BIT; + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src); + + return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, reg); +} + +u32 aarch64_insn_gen_data3(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_register reg1, + enum aarch64_insn_register reg2, + enum aarch64_insn_variant variant, + enum aarch64_insn_data3_type type) +{ + u32 insn; + + switch (type) { + case AARCH64_INSN_DATA3_MADD: + insn = aarch64_insn_get_madd_value(); + break; + case AARCH64_INSN_DATA3_MSUB: + insn = aarch64_insn_get_msub_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + break; + case AARCH64_INSN_VARIANT_64BIT: + insn |= AARCH64_INSN_SF_BIT; + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RA, insn, src); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, + reg1); + + return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, + reg2); +} + +u32 aarch64_insn_gen_logical_shifted_reg(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_register reg, + int shift, + enum aarch64_insn_variant variant, + enum aarch64_insn_logic_type type) +{ + u32 insn; + + switch (type) { + case AARCH64_INSN_LOGIC_AND: + insn = aarch64_insn_get_and_value(); + break; + case AARCH64_INSN_LOGIC_BIC: + insn = aarch64_insn_get_bic_value(); + break; + case AARCH64_INSN_LOGIC_ORR: + insn = aarch64_insn_get_orr_value(); + break; + case AARCH64_INSN_LOGIC_ORN: + insn = aarch64_insn_get_orn_value(); + break; + case AARCH64_INSN_LOGIC_EOR: + insn = aarch64_insn_get_eor_value(); + break; + case AARCH64_INSN_LOGIC_EON: + insn = aarch64_insn_get_eon_value(); + break; + case AARCH64_INSN_LOGIC_AND_SETFLAGS: + insn = aarch64_insn_get_ands_value(); + break; + case AARCH64_INSN_LOGIC_BIC_SETFLAGS: + insn = aarch64_insn_get_bics_value(); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + switch (variant) { + case AARCH64_INSN_VARIANT_32BIT: + BUG_ON(shift & ~(SZ_32 - 1)); + break; + case AARCH64_INSN_VARIANT_64BIT: + insn |= AARCH64_INSN_SF_BIT; + BUG_ON(shift & ~(SZ_64 - 1)); + break; + default: + BUG_ON(1); + return AARCH64_BREAK_FAULT; + } + + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src); + + insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, reg); + + return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_6, insn, shift); +}
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c index dfa6e3e..071a6ec 100644 --- a/arch/arm64/kernel/irq.c +++ b/arch/arm64/kernel/irq.c
@@ -40,33 +40,6 @@ return 0; } -/* - * handle_IRQ handles all hardware IRQ's. Decoded IRQs should - * not come via this function. Instead, they should provide their - * own 'handler'. Used by platform code implementing C-based 1st - * level decoding. - */ -void handle_IRQ(unsigned int irq, struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - - irq_enter(); - -