blob: d6eb7b2efc04301f3be2c047107b5c2e5b17056a [file] [log] [blame]
/*
* Device tables which are exported to userspace via
* scripts/table2alias.c. You must keep that file in sync with this
* header.
*/
#ifndef LINUX_MOD_DEVICETABLE_H
#define LINUX_MOD_DEVICETABLE_H
#ifdef __KERNEL__
#include <linux/types.h>
typedef unsigned long kernel_ulong_t;
#endif
#define PCI_ANY_ID (~0)
struct pci_device_id {
__u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/
__u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
__u32 class, class_mask; /* (class,subclass,prog-if) triplet */
kernel_ulong_t driver_data; /* Data private to the driver */
};
#define IEEE1394_MATCH_VENDOR_ID 0x0001
#define IEEE1394_MATCH_MODEL_ID 0x0002
#define IEEE1394_MATCH_SPECIFIER_ID 0x0004
#define IEEE1394_MATCH_VERSION 0x0008
struct ieee1394_device_id {
__u32 match_flags;
__u32 vendor_id;
__u32 model_id;
__u32 specifier_id;
__u32 version;
kernel_ulong_t driver_data;
};
/*
* Device table entry for "new style" table-driven USB drivers.
* User mode code can read these tables to choose which modules to load.
* Declare the table as a MODULE_DEVICE_TABLE.
*
* A probe() parameter will point to a matching entry from this table.
* Use the driver_info field for each match to hold information tied
* to that match: device quirks, etc.
*
* Terminate the driver's table with an all-zeroes entry.
* Use the flag values to control which fields are compared.
*/
/**
* struct usb_device_id - identifies USB devices for probing and hotplugging
* @match_flags: Bit mask controlling of the other fields are used to match
* against new devices. Any field except for driver_info may be used,
* although some only make sense in conjunction with other fields.
* This is usually set by a USB_DEVICE_*() macro, which sets all
* other fields in this structure except for driver_info.
* @idVendor: USB vendor ID for a device; numbers are assigned
* by the USB forum to its members.
* @idProduct: Vendor-assigned product ID.
* @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
* This is also used to identify individual product versions, for
* a range consisting of a single device.
* @bcdDevice_hi: High end of version number range. The range of product
* versions is inclusive.
* @bDeviceClass: Class of device; numbers are assigned
* by the USB forum. Products may choose to implement classes,
* or be vendor-specific. Device classes specify behavior of all
* the interfaces on a devices.
* @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
* @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
* @bInterfaceClass: Class of interface; numbers are assigned
* by the USB forum. Products may choose to implement classes,
* or be vendor-specific. Interface classes specify behavior only
* of a given interface; other interfaces may support other classes.
* @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
* @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
* @driver_info: Holds information used by the driver. Usually it holds
* a pointer to a descriptor understood by the driver, or perhaps
* device flags.
*
* In most cases, drivers will create a table of device IDs by using
* USB_DEVICE(), or similar macros designed for that purpose.
* They will then export it to userspace using MODULE_DEVICE_TABLE(),
* and provide it to the USB core through their usb_driver structure.
*
* See the usb_match_id() function for information about how matches are
* performed. Briefly, you will normally use one of several macros to help
* construct these entries. Each entry you provide will either identify
* one or more specific products, or will identify a class of products
* which have agreed to behave the same. You should put the more specific
* matches towards the beginning of your table, so that driver_info can
* record quirks of specific products.
*/
struct usb_device_id {
/* which fields to match against? */
__u16 match_flags;
/* Used for product specific matches; range is inclusive */
__u16 idVendor;
__u16 idProduct;
__u16 bcdDevice_lo;
__u16 bcdDevice_hi;
/* Used for device class matches */
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
/* Used for interface class matches */
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
/* not matched against */
kernel_ulong_t driver_info;
};
/* Some useful macros to use to create struct usb_device_id */
#define USB_DEVICE_ID_MATCH_VENDOR 0x0001
#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002
#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004
#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008
#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010
#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020
#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040
#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080
#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100
#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200
/* s390 CCW devices */
struct ccw_device_id {
__u16 match_flags; /* which fields to match against */
__u16 cu_type; /* control unit type */
__u16 dev_type; /* device type */
__u8 cu_model; /* control unit model */
__u8 dev_model; /* device model */
kernel_ulong_t driver_info;
};
#define CCW_DEVICE_ID_MATCH_CU_TYPE 0x01
#define CCW_DEVICE_ID_MATCH_CU_MODEL 0x02
#define CCW_DEVICE_ID_MATCH_DEVICE_TYPE 0x04
#define CCW_DEVICE_ID_MATCH_DEVICE_MODEL 0x08
#define PNP_ID_LEN 8
#define PNP_MAX_DEVICES 8
struct pnp_device_id {
__u8 id[PNP_ID_LEN];
kernel_ulong_t driver_data;
};
struct pnp_card_device_id {
__u8 id[PNP_ID_LEN];
kernel_ulong_t driver_data;
struct {
__u8 id[PNP_ID_LEN];
} devs[PNP_MAX_DEVICES];
};
#define SERIO_ANY 0xff
struct serio_device_id {
__u8 type;
__u8 extra;
__u8 id;
__u8 proto;
};
#endif /* LINUX_MOD_DEVICETABLE_H */