| perf-record(1) |
| ============== |
| |
| NAME |
| ---- |
| perf-record - Run a command and record its profile into perf.data |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'perf record' [-e <EVENT> | --event=EVENT] [-l] [-a] <command> |
| 'perf record' [-e <EVENT> | --event=EVENT] [-l] [-a] -- <command> [<options>] |
| |
| DESCRIPTION |
| ----------- |
| This command runs a command and gathers a performance counter profile |
| from it, into perf.data - without displaying anything. |
| |
| This file can then be inspected later on, using 'perf report'. |
| |
| |
| OPTIONS |
| ------- |
| <command>...:: |
| Any command you can specify in a shell. |
| |
| -e:: |
| --event=:: |
| Select the PMU event. Selection can be: |
| |
| - a symbolic event name (use 'perf list' to list all events) |
| |
| - a raw PMU event (eventsel+umask) in the form of rNNN where NNN is a |
| hexadecimal event descriptor. |
| |
| - a symbolically formed PMU event like 'pmu/param1=0x3,param2/' where |
| 'param1', 'param2', etc are defined as formats for the PMU in |
| /sys/bus/event_sources/devices/<pmu>/format/*. |
| |
| - a symbolically formed event like 'pmu/config=M,config1=N,config3=K/' |
| |
| where M, N, K are numbers (in decimal, hex, octal format). Acceptable |
| values for each of 'config', 'config1' and 'config2' are defined by |
| corresponding entries in /sys/bus/event_sources/devices/<pmu>/format/* |
| param1 and param2 are defined as formats for the PMU in: |
| /sys/bus/event_sources/devices/<pmu>/format/* |
| |
| There are also some params which are not defined in .../<pmu>/format/*. |
| These params can be used to overload default config values per event. |
| Here is a list of the params. |
| - 'period': Set event sampling period |
| - 'freq': Set event sampling frequency |
| - 'time': Disable/enable time stamping. Acceptable values are 1 for |
| enabling time stamping. 0 for disabling time stamping. |
| The default is 1. |
| - 'call-graph': Disable/enable callgraph. Acceptable str are "fp" for |
| FP mode, "dwarf" for DWARF mode, "lbr" for LBR mode and |
| "no" for disable callgraph. |
| - 'stack-size': user stack size for dwarf mode |
| Note: If user explicitly sets options which conflict with the params, |
| the value set by the params will be overridden. |
| |
| - a hardware breakpoint event in the form of '\mem:addr[/len][:access]' |
| where addr is the address in memory you want to break in. |
| Access is the memory access type (read, write, execute) it can |
| be passed as follows: '\mem:addr[:[r][w][x]]'. len is the range, |
| number of bytes from specified addr, which the breakpoint will cover. |
| If you want to profile read-write accesses in 0x1000, just set |
| 'mem:0x1000:rw'. |
| If you want to profile write accesses in [0x1000~1008), just set |
| 'mem:0x1000/8:w'. |
| |
| - a group of events surrounded by a pair of brace ("{event1,event2,...}"). |
| Each event is separated by commas and the group should be quoted to |
| prevent the shell interpretation. You also need to use --group on |
| "perf report" to view group events together. |
| |
| --filter=<filter>:: |
| Event filter. This option should follow a event selector (-e) which |
| selects tracepoint event(s). Multiple '--filter' options are combined |
| using '&&'. |
| |
| --exclude-perf:: |
| Don't record events issued by perf itself. This option should follow |
| a event selector (-e) which selects tracepoint event(s). It adds a |
| filter expression 'common_pid != $PERFPID' to filters. If other |
| '--filter' exists, the new filter expression will be combined with |
| them by '&&'. |
| |
| -a:: |
| --all-cpus:: |
| System-wide collection from all CPUs. |
| |
| -p:: |
| --pid=:: |
| Record events on existing process ID (comma separated list). |
| |
| -t:: |
| --tid=:: |
| Record events on existing thread ID (comma separated list). |
| This option also disables inheritance by default. Enable it by adding |
| --inherit. |
| |
| -u:: |
| --uid=:: |
| Record events in threads owned by uid. Name or number. |
| |
| -r:: |
| --realtime=:: |
| Collect data with this RT SCHED_FIFO priority. |
| |
| --no-buffering:: |
| Collect data without buffering. |
| |
| -c:: |
| --count=:: |
| Event period to sample. |
| |
| -o:: |
| --output=:: |
| Output file name. |
| |
| -i:: |
| --no-inherit:: |
| Child tasks do not inherit counters. |
| -F:: |
| --freq=:: |
| Profile at this frequency. |
| |
| -m:: |
| --mmap-pages=:: |
| Number of mmap data pages (must be a power of two) or size |
| specification with appended unit character - B/K/M/G. The |
| size is rounded up to have nearest pages power of two value. |
| Also, by adding a comma, the number of mmap pages for AUX |
| area tracing can be specified. |
| |
| --group:: |
| Put all events in a single event group. This precedes the --event |
| option and remains only for backward compatibility. See --event. |
| |
| -g:: |
| Enables call-graph (stack chain/backtrace) recording. |
| |
| --call-graph:: |
| Setup and enable call-graph (stack chain/backtrace) recording, |
| implies -g. Default is "fp". |
| |
| Allows specifying "fp" (frame pointer) or "dwarf" |
| (DWARF's CFI - Call Frame Information) or "lbr" |
| (Hardware Last Branch Record facility) as the method to collect |
| the information used to show the call graphs. |
| |
| In some systems, where binaries are build with gcc |
| --fomit-frame-pointer, using the "fp" method will produce bogus |
| call graphs, using "dwarf", if available (perf tools linked to |
| the libunwind or libdw library) should be used instead. |
| Using the "lbr" method doesn't require any compiler options. It |
| will produce call graphs from the hardware LBR registers. The |
| main limition is that it is only available on new Intel |
| platforms, such as Haswell. It can only get user call chain. It |
| doesn't work with branch stack sampling at the same time. |
| |
| When "dwarf" recording is used, perf also records (user) stack dump |
| when sampled. Default size of the stack dump is 8192 (bytes). |
| User can change the size by passing the size after comma like |
| "--call-graph dwarf,4096". |
| |
| -q:: |
| --quiet:: |
| Don't print any message, useful for scripting. |
| |
| -v:: |
| --verbose:: |
| Be more verbose (show counter open errors, etc). |
| |
| -s:: |
| --stat:: |
| Record per-thread event counts. Use it with 'perf report -T' to see |
| the values. |
| |
| -d:: |
| --data:: |
| Record the sample addresses. |
| |
| -T:: |
| --timestamp:: |
| Record the sample timestamps. Use it with 'perf report -D' to see the |
| timestamps, for instance. |
| |
| -P:: |
| --period:: |
| Record the sample period. |
| |
| -n:: |
| --no-samples:: |
| Don't sample. |
| |
| -R:: |
| --raw-samples:: |
| Collect raw sample records from all opened counters (default for tracepoint counters). |
| |
| -C:: |
| --cpu:: |
| Collect samples only on the list of CPUs provided. Multiple CPUs can be provided as a |
| comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. |
| In per-thread mode with inheritance mode on (default), samples are captured only when |
| the thread executes on the designated CPUs. Default is to monitor all CPUs. |
| |
| -B:: |
| --no-buildid:: |
| Do not save the build ids of binaries in the perf.data files. This skips |
| post processing after recording, which sometimes makes the final step in |
| the recording process to take a long time, as it needs to process all |
| events looking for mmap records. The downside is that it can misresolve |
| symbols if the workload binaries used when recording get locally rebuilt |
| or upgraded, because the only key available in this case is the |
| pathname. You can also set the "record.build-id" config variable to |
| 'skip to have this behaviour permanently. |
| |
| -N:: |
| --no-buildid-cache:: |
| Do not update the buildid cache. This saves some overhead in situations |
| where the information in the perf.data file (which includes buildids) |
| is sufficient. You can also set the "record.build-id" config variable to |
| 'no-cache' to have the same effect. |
| |
| -G name,...:: |
| --cgroup name,...:: |
| monitor only in the container (cgroup) called "name". This option is available only |
| in per-cpu mode. The cgroup filesystem must be mounted. All threads belonging to |
| container "name" are monitored when they run on the monitored CPUs. Multiple cgroups |
| can be provided. Each cgroup is applied to the corresponding event, i.e., first cgroup |
| to first event, second cgroup to second event and so on. It is possible to provide |
| an empty cgroup (monitor all the time) using, e.g., -G foo,,bar. Cgroups must have |
| corresponding events, i.e., they always refer to events defined earlier on the command |
| line. |
| |
| -b:: |
| --branch-any:: |
| Enable taken branch stack sampling. Any type of taken branch may be sampled. |
| This is a shortcut for --branch-filter any. See --branch-filter for more infos. |
| |
| -j:: |
| --branch-filter:: |
| Enable taken branch stack sampling. Each sample captures a series of consecutive |
| taken branches. The number of branches captured with each sample depends on the |
| underlying hardware, the type of branches of interest, and the executed code. |
| It is possible to select the types of branches captured by enabling filters. The |
| following filters are defined: |
| |
| - any: any type of branches |
| - any_call: any function call or system call |
| - any_ret: any function return or system call return |
| - ind_call: any indirect branch |
| - call: direct calls, including far (to/from kernel) calls |
| - u: only when the branch target is at the user level |
| - k: only when the branch target is in the kernel |
| - hv: only when the target is at the hypervisor level |
| - in_tx: only when the target is in a hardware transaction |
| - no_tx: only when the target is not in a hardware transaction |
| - abort_tx: only when the target is a hardware transaction abort |
| - cond: conditional branches |
| |
| + |
| The option requires at least one branch type among any, any_call, any_ret, ind_call, cond. |
| The privilege levels may be omitted, in which case, the privilege levels of the associated |
| event are applied to the branch filter. Both kernel (k) and hypervisor (hv) privilege |
| levels are subject to permissions. When sampling on multiple events, branch stack sampling |
| is enabled for all the sampling events. The sampled branch type is the same for all events. |
| The various filters must be specified as a comma separated list: --branch-filter any_ret,u,k |
| Note that this feature may not be available on all processors. |
| |
| --weight:: |
| Enable weightened sampling. An additional weight is recorded per sample and can be |
| displayed with the weight and local_weight sort keys. This currently works for TSX |
| abort events and some memory events in precise mode on modern Intel CPUs. |
| |
| --transaction:: |
| Record transaction flags for transaction related events. |
| |
| --per-thread:: |
| Use per-thread mmaps. By default per-cpu mmaps are created. This option |
| overrides that and uses per-thread mmaps. A side-effect of that is that |
| inheritance is automatically disabled. --per-thread is ignored with a warning |
| if combined with -a or -C options. |
| |
| -D:: |
| --delay=:: |
| After starting the program, wait msecs before measuring. This is useful to |
| filter out the startup phase of the program, which is often very different. |
| |
| -I:: |
| --intr-regs:: |
| Capture machine state (registers) at interrupt, i.e., on counter overflows for |
| each sample. List of captured registers depends on the architecture. This option |
| is off by default. It is possible to select the registers to sample using their |
| symbolic names, e.g. on x86, ax, si. To list the available registers use |
| --intr-regs=\?. To name registers, pass a comma separated list such as |
| --intr-regs=ax,bx. The list of register is architecture dependent. |
| |
| |
| --running-time:: |
| Record running and enabled time for read events (:S) |
| |
| -k:: |
| --clockid:: |
| Sets the clock id to use for the various time fields in the perf_event_type |
| records. See clock_gettime(). In particular CLOCK_MONOTONIC and |
| CLOCK_MONOTONIC_RAW are supported, some events might also allow |
| CLOCK_BOOTTIME, CLOCK_REALTIME and CLOCK_TAI. |
| |
| -S:: |
| --snapshot:: |
| Select AUX area tracing Snapshot Mode. This option is valid only with an |
| AUX area tracing event. Optionally the number of bytes to capture per |
| snapshot can be specified. In Snapshot Mode, trace data is captured only when |
| signal SIGUSR2 is received. |
| |
| --proc-map-timeout:: |
| When processing pre-existing threads /proc/XXX/mmap, it may take a long time, |
| because the file may be huge. A time out is needed in such cases. |
| This option sets the time out limit. The default value is 500 ms. |
| |
| --switch-events:: |
| Record context switch events i.e. events of type PERF_RECORD_SWITCH or |
| PERF_RECORD_SWITCH_CPU_WIDE. |
| |
| --clang-path=PATH:: |
| Path to clang binary to use for compiling BPF scriptlets. |
| (enabled when BPF support is on) |
| |
| --clang-opt=OPTIONS:: |
| Options passed to clang when compiling BPF scriptlets. |
| (enabled when BPF support is on) |
| |
| --vmlinux=PATH:: |
| Specify vmlinux path which has debuginfo. |
| (enabled when BPF prologue is on) |
| |
| --buildid-all:: |
| Record build-id of all DSOs regardless whether it's actually hit or not. |
| |
| SEE ALSO |
| -------- |
| linkperf:perf-stat[1], linkperf:perf-list[1] |