blob: 47f8053d02402fac003ebabf02427b7a62f7b4a3 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014-2015 Broadcom Corporation
* Copyright 2014 Linaro Limited
*/
#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irqchip/irq-bcm2836.h>
#include <linux/jiffies.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/sched.h>
#include <linux/sched/clock.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/smp.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
/* Size of mapped Cortex A9 SCU address space */
#define CORTEX_A9_SCU_SIZE 0x58
#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */
#define BOOT_ADDR_CPUID_MASK 0x3
/* Name of device node property defining secondary boot register location */
#define OF_SECONDARY_BOOT "secondary-boot-reg"
#define MPIDR_CPUID_BITMASK 0x3
/*
* Enable the Cortex A9 Snoop Control Unit
*
* By the time this is called we already know there are multiple
* cores present. We assume we're running on a Cortex A9 processor,
* so any trouble getting the base address register or getting the
* SCU base is a problem.
*
* Return 0 if successful or an error code otherwise.
*/
static int __init scu_a9_enable(void)
{
unsigned long config_base;
void __iomem *scu_base;
if (!scu_a9_has_base()) {
pr_err("no configuration base address register!\n");
return -ENXIO;
}
/* Config base address register value is zero for uniprocessor */
config_base = scu_a9_get_base();
if (!config_base) {
pr_err("hardware reports only one core\n");
return -ENOENT;
}
scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
if (!scu_base) {
pr_err("failed to remap config base (%lu/%u) for SCU\n",
config_base, CORTEX_A9_SCU_SIZE);
return -ENOMEM;
}
scu_enable(scu_base);
iounmap(scu_base); /* That's the last we'll need of this */
return 0;
}
static u32 secondary_boot_addr_for(unsigned int cpu)
{
u32 secondary_boot_addr = 0;
struct device_node *cpu_node = of_get_cpu_node(cpu, NULL);
if (!cpu_node) {
pr_err("Failed to find device tree node for CPU%u\n", cpu);
return 0;
}
if (of_property_read_u32(cpu_node,
OF_SECONDARY_BOOT,
&secondary_boot_addr))
pr_err("required secondary boot register not specified for CPU%u\n",
cpu);
of_node_put(cpu_node);
return secondary_boot_addr;
}
static int nsp_write_lut(unsigned int cpu)
{
void __iomem *sku_rom_lut;
phys_addr_t secondary_startup_phy;
const u32 secondary_boot_addr = secondary_boot_addr_for(cpu);
if (!secondary_boot_addr)
return -EINVAL;
sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr,
sizeof(phys_addr_t));
if (!sku_rom_lut) {
pr_warn("unable to ioremap SKU-ROM LUT register for cpu %u\n", cpu);
return -ENOMEM;
}
secondary_startup_phy = __pa_symbol(secondary_startup);
BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
writel_relaxed(secondary_startup_phy, sku_rom_lut);
/* Ensure the write is visible to the secondary core */
smp_wmb();
iounmap(sku_rom_lut);
return 0;
}
static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
{
const cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
/* Enable the SCU on Cortex A9 based SoCs */
if (scu_a9_enable()) {
/* Update the CPU present map to reflect uniprocessor mode */
pr_warn("failed to enable A9 SCU - disabling SMP\n");
init_cpu_present(&only_cpu_0);
}
}
/*
* The ROM code has the secondary cores looping, waiting for an event.
* When an event occurs each core examines the bottom two bits of the
* secondary boot register. When a core finds those bits contain its
* own core id, it performs initialization, including computing its boot
* address by clearing the boot register value's bottom two bits. The
* core signals that it is beginning its execution by writing its boot
* address back to the secondary boot register, and finally jumps to
* that address.
*
* So to start a core executing we need to:
* - Encode the (hardware) CPU id with the bottom bits of the secondary
* start address.
* - Write that value into the secondary boot register.
* - Generate an event to wake up the secondary CPU(s).
* - Wait for the secondary boot register to be re-written, which
* indicates the secondary core has started.
*/
static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
void __iomem *boot_reg;
phys_addr_t boot_func;
u64 start_clock;
u32 cpu_id;
u32 boot_val;
bool timeout = false;
const u32 secondary_boot_addr = secondary_boot_addr_for(cpu);
cpu_id = cpu_logical_map(cpu);
if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
return -EINVAL;
}
if (!secondary_boot_addr)
return -EINVAL;
boot_reg = ioremap_nocache((phys_addr_t)secondary_boot_addr,
sizeof(phys_addr_t));
if (!boot_reg) {
pr_err("unable to map boot register for cpu %u\n", cpu_id);
return -ENOMEM;
}
/*
* Secondary cores will start in secondary_startup(),
* defined in "arch/arm/kernel/head.S"
*/
boot_func = __pa_symbol(secondary_startup);
BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
BUG_ON(boot_func > (phys_addr_t)U32_MAX);
/* The core to start is encoded in the low bits */
boot_val = (u32)boot_func | cpu_id;
writel_relaxed(boot_val, boot_reg);
sev();
/* The low bits will be cleared once the core has started */
start_clock = local_clock();
while (!timeout && readl_relaxed(boot_reg) == boot_val)
timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
iounmap(boot_reg);
if (!timeout)
return 0;
pr_err("timeout waiting for cpu %u to start\n", cpu_id);
return -ENXIO;
}
/* Cluster Dormant Control command to bring CPU into a running state */
#define CDC_CMD 6
#define CDC_CMD_OFFSET 0
#define CDC_CMD_REG(cpu) (CDC_CMD_OFFSET + 4*(cpu))
/*
* BCM23550 has a Cluster Dormant Control block that keeps the core in
* idle state. A command needs to be sent to the block to bring the CPU
* into running state.
*/
static int bcm23550_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
void __iomem *cdc_base;
struct device_node *dn;
char *name;
int ret;
/* Make sure a CDC node exists before booting the
* secondary core.
*/
name = "brcm,bcm23550-cdc";
dn = of_find_compatible_node(NULL, NULL, name);
if (!dn) {
pr_err("unable to find cdc node\n");
return -ENODEV;
}
cdc_base = of_iomap(dn, 0);
of_node_put(dn);
if (!cdc_base) {
pr_err("unable to remap cdc base register\n");
return -ENOMEM;
}
/* Boot the secondary core */
ret = kona_boot_secondary(cpu, idle);
if (ret)
goto out;
/* Bring this CPU to RUN state so that nIRQ nFIQ
* signals are unblocked.
*/
writel_relaxed(CDC_CMD, cdc_base + CDC_CMD_REG(cpu));
out:
iounmap(cdc_base);
return ret;
}
static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int ret;
/*
* After wake up, secondary core branches to the startup
* address programmed at SKU ROM LUT location.
*/
ret = nsp_write_lut(cpu);
if (ret) {
pr_err("unable to write startup addr to SKU ROM LUT\n");
goto out;
}
/* Send a CPU wakeup interrupt to the secondary core */
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
out:
return ret;
}
static int bcm2836_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
void __iomem *intc_base;
struct device_node *dn;
char *name;
name = "brcm,bcm2836-l1-intc";
dn = of_find_compatible_node(NULL, NULL, name);
if (!dn) {
pr_err("unable to find intc node\n");
return -ENODEV;
}
intc_base = of_iomap(dn, 0);
of_node_put(dn);
if (!intc_base) {
pr_err("unable to remap intc base register\n");
return -ENOMEM;
}
writel(virt_to_phys(secondary_startup),
intc_base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
dsb(sy);
sev();
iounmap(intc_base);
return 0;
}
static const struct smp_operations kona_smp_ops __initconst = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
.smp_boot_secondary = kona_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
&kona_smp_ops);
static const struct smp_operations bcm23550_smp_ops __initconst = {
.smp_boot_secondary = bcm23550_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_bcm23550, "brcm,bcm23550",
&bcm23550_smp_ops);
static const struct smp_operations nsp_smp_ops __initconst = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
.smp_boot_secondary = nsp_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
const struct smp_operations bcm2836_smp_ops __initconst = {
.smp_boot_secondary = bcm2836_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_bcm2836, "brcm,bcm2836-smp", &bcm2836_smp_ops);