blob: 4f744435d649dfd678e63829500b0303e93c9dc6 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/mtd/partitions.h>
#include <linux/sizes.h>
#include <linux/phy.h>
#include <linux/serial_8250.h>
#include <linux/stmmac.h>
#include <linux/usb/ehci_pdriver.h>
#include <asm/loongson/32/platform.h>
#include <asm/loongson/32/loongson1.h>
#include <asm/loongson/32/cpufreq.h>
#include <asm/loongson/32/dma.h>
#include <asm/loongson/32/nand.h>
/* 8250/16550 compatible UART */
#define LS1X_UART(_id) \
{ \
.mapbase = LS1X_UART ## _id ## _BASE, \
.irq = LS1X_UART ## _id ## _IRQ, \
.iotype = UPIO_MEM, \
.flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
.type = PORT_16550A, \
}
static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
LS1X_UART(0),
LS1X_UART(1),
LS1X_UART(2),
LS1X_UART(3),
{},
};
struct platform_device ls1x_uart_pdev = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = ls1x_serial8250_pdata,
},
};
void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
{
struct clk *clk;
struct plat_serial8250_port *p;
clk = clk_get(&pdev->dev, pdev->name);
if (IS_ERR(clk)) {
pr_err("unable to get %s clock, err=%ld",
pdev->name, PTR_ERR(clk));
return;
}
clk_prepare_enable(clk);
for (p = pdev->dev.platform_data; p->flags != 0; ++p)
p->uartclk = clk_get_rate(clk);
}
/* CPUFreq */
static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
.clk_name = "cpu_clk",
.osc_clk_name = "osc_clk",
.max_freq = 266 * 1000,
.min_freq = 33 * 1000,
};
struct platform_device ls1x_cpufreq_pdev = {
.name = "ls1x-cpufreq",
.dev = {
.platform_data = &ls1x_cpufreq_pdata,
},
};
/* Synopsys Ethernet GMAC */
static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
.phy_mask = 0,
};
static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
.pbl = 1,
};
int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
{
struct plat_stmmacenet_data *plat_dat = NULL;
u32 val;
val = __raw_readl(LS1X_MUX_CTRL1);
#if defined(CONFIG_LOONGSON1_LS1B)
plat_dat = dev_get_platdata(&pdev->dev);
if (plat_dat->bus_id) {
__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
GMAC1_USE_UART0, LS1X_MUX_CTRL0);
switch (plat_dat->interface) {
case PHY_INTERFACE_MODE_RGMII:
val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
break;
case PHY_INTERFACE_MODE_MII:
val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
break;
default:
pr_err("unsupported mii mode %d\n",
plat_dat->interface);
return -ENOTSUPP;
}
val &= ~GMAC1_SHUT;
} else {
switch (plat_dat->interface) {
case PHY_INTERFACE_MODE_RGMII:
val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
break;
case PHY_INTERFACE_MODE_MII:
val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
break;
default:
pr_err("unsupported mii mode %d\n",
plat_dat->interface);
return -ENOTSUPP;
}
val &= ~GMAC0_SHUT;
}
__raw_writel(val, LS1X_MUX_CTRL1);
#elif defined(CONFIG_LOONGSON1_LS1C)
plat_dat = dev_get_platdata(&pdev->dev);
val &= ~PHY_INTF_SELI;
if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
val |= 0x4 << PHY_INTF_SELI_SHIFT;
__raw_writel(val, LS1X_MUX_CTRL1);
val = __raw_readl(LS1X_MUX_CTRL0);
__raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
#endif
return 0;
}
static struct plat_stmmacenet_data ls1x_eth0_pdata = {
.bus_id = 0,
.phy_addr = -1,
#if defined(CONFIG_LOONGSON1_LS1B)
.interface = PHY_INTERFACE_MODE_MII,
#elif defined(CONFIG_LOONGSON1_LS1C)
.interface = PHY_INTERFACE_MODE_RMII,
#endif
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
.has_gmac = 1,
.tx_coe = 1,
.rx_queues_to_use = 1,
.tx_queues_to_use = 1,
.init = ls1x_eth_mux_init,
};
static struct resource ls1x_eth0_resources[] = {
[0] = {
.start = LS1X_GMAC0_BASE,
.end = LS1X_GMAC0_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "macirq",
.start = LS1X_GMAC0_IRQ,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device ls1x_eth0_pdev = {
.name = "stmmaceth",
.id = 0,
.num_resources = ARRAY_SIZE(ls1x_eth0_resources),
.resource = ls1x_eth0_resources,
.dev = {
.platform_data = &ls1x_eth0_pdata,
},
};
#ifdef CONFIG_LOONGSON1_LS1B
static struct plat_stmmacenet_data ls1x_eth1_pdata = {
.bus_id = 1,
.phy_addr = -1,
.interface = PHY_INTERFACE_MODE_MII,
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
.has_gmac = 1,
.tx_coe = 1,
.rx_queues_to_use = 1,
.tx_queues_to_use = 1,
.init = ls1x_eth_mux_init,
};
static struct resource ls1x_eth1_resources[] = {
[0] = {
.start = LS1X_GMAC1_BASE,
.end = LS1X_GMAC1_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "macirq",
.start = LS1X_GMAC1_IRQ,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device ls1x_eth1_pdev = {
.name = "stmmaceth",
.id = 1,
.num_resources = ARRAY_SIZE(ls1x_eth1_resources),
.resource = ls1x_eth1_resources,
.dev = {
.platform_data = &ls1x_eth1_pdata,
},
};
#endif /* CONFIG_LOONGSON1_LS1B */
/* GPIO */
static struct resource ls1x_gpio0_resources[] = {
[0] = {
.start = LS1X_GPIO0_BASE,
.end = LS1X_GPIO0_BASE + SZ_4 - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device ls1x_gpio0_pdev = {
.name = "ls1x-gpio",
.id = 0,
.num_resources = ARRAY_SIZE(ls1x_gpio0_resources),
.resource = ls1x_gpio0_resources,
};
static struct resource ls1x_gpio1_resources[] = {
[0] = {
.start = LS1X_GPIO1_BASE,
.end = LS1X_GPIO1_BASE + SZ_4 - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device ls1x_gpio1_pdev = {
.name = "ls1x-gpio",
.id = 1,
.num_resources = ARRAY_SIZE(ls1x_gpio1_resources),
.resource = ls1x_gpio1_resources,
};
/* USB EHCI */
static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
static struct resource ls1x_ehci_resources[] = {
[0] = {
.start = LS1X_EHCI_BASE,
.end = LS1X_EHCI_BASE + SZ_32K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = LS1X_EHCI_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct usb_ehci_pdata ls1x_ehci_pdata = {
};
struct platform_device ls1x_ehci_pdev = {
.name = "ehci-platform",
.id = -1,
.num_resources = ARRAY_SIZE(ls1x_ehci_resources),
.resource = ls1x_ehci_resources,
.dev = {
.dma_mask = &ls1x_ehci_dmamask,
.platform_data = &ls1x_ehci_pdata,
},
};
/* Real Time Clock */
void __init ls1x_rtc_set_extclk(struct platform_device *pdev)
{
u32 val = __raw_readl(LS1X_RTC_CTRL);
if (!(val & RTC_EXTCLK_OK))
__raw_writel(val | RTC_EXTCLK_EN, LS1X_RTC_CTRL);
}
struct platform_device ls1x_rtc_pdev = {
.name = "ls1x-rtc",
.id = -1,
};
/* Watchdog */
static struct resource ls1x_wdt_resources[] = {
{
.start = LS1X_WDT_BASE,
.end = LS1X_WDT_BASE + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device ls1x_wdt_pdev = {
.name = "ls1x-wdt",
.id = -1,
.num_resources = ARRAY_SIZE(ls1x_wdt_resources),
.resource = ls1x_wdt_resources,
};