Merge tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"This should be it for 5.10.
Mike and Song looked into the warning case, and thankfully it appears
the fix was pretty trivial - we can just change the md device chunk
type to unsigned int to get rid of it. They cannot currently be < 0,
and nobody is checking for that either.
We're reverting the discard changes as the corruption reports came in
very late, and there's just no time to attempt to deal with it at this
point. Reverting the changes in question is the right call for 5.10"
* tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block:
md: change mddev 'chunk_sectors' from int to unsigned
Revert "md: add md_submit_discard_bio() for submitting discard bio"
Revert "md/raid10: extend r10bio devs to raid disks"
Revert "md/raid10: pull codes that wait for blocked dev into one function"
Revert "md/raid10: improve raid10 discard request"
Revert "md/raid10: improve discard request for far layout"
Revert "dm raid: remove unnecessary discard limits for raid10"
diff --git a/.mailmap b/.mailmap
index 1e14566..225546c 100644
--- a/.mailmap
+++ b/.mailmap
@@ -82,7 +82,10 @@
Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@imgtec.com>
Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@mips.com>
<dev.kurt@vandijck-laurijssen.be> <kurt.van.dijck@eia.be>
-Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <[dbaryshkov@gmail.com]>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_baryshkov@mentor.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_eremin@mentor.com>
Dmitry Safonov <0x7f454c46@gmail.com> <dima@arista.com>
Dmitry Safonov <0x7f454c46@gmail.com> <d.safonov@partner.samsung.com>
Dmitry Safonov <0x7f454c46@gmail.com> <dsafonov@virtuozzo.com>
@@ -287,6 +290,7 @@
Sarangdhar Joshi <spjoshi@codeaurora.org>
Sascha Hauer <s.hauer@pengutronix.de>
S.Çağlar Onur <caglar@pardus.org.tr>
+Sean Christopherson <seanjc@google.com> <sean.j.christopherson@intel.com>
Sean Nyekjaer <sean@geanix.com> <sean.nyekjaer@prevas.dk>
Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
Sebastian Reichel <sre@kernel.org> <sre@debian.org>
@@ -318,6 +322,8 @@
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
+Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Uwe Kleine-König <ukleinek@strlen.de>
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
diff --git a/CREDITS b/CREDITS
index 8592e45..e88d1a7 100644
--- a/CREDITS
+++ b/CREDITS
@@ -98,7 +98,7 @@
E: andersen@codepoet.org
W: https://www.codepoet.org/
P: 1024D/30D39057 1BC4 2742 E885 E4DE 9301 0C82 5F9B 643E 30D3 9057
-D: Maintainer of ide-cd and Uniform CD-ROM driver,
+D: Maintainer of ide-cd and Uniform CD-ROM driver,
D: ATAPI CD-Changer support, Major 2.1.x CD-ROM update.
S: 352 North 525 East
S: Springville, Utah 84663
@@ -263,7 +263,7 @@
E: pbd@op.net
D: Driver for WaveFront soundcards (Turtle Beach Maui, Tropez, Tropez+)
D: Various bugfixes and changes to sound drivers
-S: USA
+S: USA
N: Carlos Henrique Bauer
E: chbauer@acm.org
@@ -740,6 +740,11 @@
S: Portland, Oregon
S: USA
+N: Jason Cooper
+D: ARM/Marvell SOC co-maintainer
+D: irqchip co-maintainer
+D: MVEBU PCI DRIVER co-maintainer
+
N: Robin Cornelius
E: robincornelius@users.sourceforge.net
D: Ralink rt2x00 WLAN driver
@@ -849,6 +854,12 @@
D: AX25-HOWTO, HAM-HOWTO, IPX-HOWTO, NET-2-HOWTO
D: ax25-utils maintainer.
+N: Kamil Debski
+E: kamil@wypas.org
+D: Samsung S5P 2D graphics acceleration and Multi Format Codec drivers
+D: Samsung USB2 phy drivers
+D: PWM fan driver
+
N: Helge Deller
E: deller@gmx.de
W: http://www.parisc-linux.org/
@@ -1199,7 +1210,7 @@
E: dfrasnel@alphalinux.org
W: http://www.alphalinux.org/
P: 1024/3EF87611 B9 F1 44 50 D3 E8 C2 80 DA E5 55 AA 56 7C 42 DA
-D: DEC Alpha hacker
+D: DEC Alpha hacker
D: Miscellaneous bug squisher
N: Jim Freeman
@@ -1299,7 +1310,7 @@
S: New South Wales, 2121
S: Australia
-N: Carlos E. Gorges
+N: Carlos E. Gorges
E: carlos@techlinux.com.br
D: fix smp support on cmpci driver
P: 2048G/EA3C4B19 FF31 33A6 0362 4915 B7EB E541 17D0 0379 EA3C 4B19
@@ -1340,7 +1351,7 @@
E: wgreathouse@myfavoritei.com
D: Current Belkin USB Serial Adapter F5U103 hacker
D: Kernel hacker, embedded systems
-S: 7802 Fitzwater Road
+S: 7802 Fitzwater Road
S: Brecksville, OH 44141-1334
S: USA
@@ -1381,7 +1392,7 @@
E: grant@torque.net
W: http://www.torque.net/linux-pp.html
D: original author of ppa driver for parallel port ZIP drive
-D: original architect of the parallel-port sharing scheme
+D: original architect of the parallel-port sharing scheme
D: PARIDE subsystem: drivers for parallel port IDE & ATAPI devices
S: 44 St. Joseph Street, Suite 506
S: Toronto, Ontario, M4Y 2W4
@@ -1523,7 +1534,7 @@
E: benh@kernel.crashing.org
D: Various parts of PPC/PPC64 & PowerMac
S: 312/107 Canberra Avenue
-S: Griffith, ACT 2603
+S: Griffith, ACT 2603
S: Australia
N: Andreas Herrmann
@@ -1825,7 +1836,7 @@
N: Bernhard Kaindl
E: bkaindl@netway.at
E: edv@bartelt.via.at
-D: Author of a menu based configuration tool, kmenu, which
+D: Author of a menu based configuration tool, kmenu, which
D: is the predecessor of 'make menuconfig' and 'make xconfig'.
D: digiboard driver update(modularisation work and 2.1.x upd)
S: Tallak 95
@@ -2016,7 +2027,7 @@
D: IP transparent proxy support
S: X/OS Experts in Open Systems BV
S: Kruislaan 419
-S: 1098 VA Amsterdam
+S: 1098 VA Amsterdam
S: The Netherlands
N: Goran Koruga
@@ -2088,7 +2099,7 @@
N: Andrzej M. Krzysztofowicz
E: ankry@mif.pg.gda.pl
-D: Some 8-bit XT disk driver and devfs hacking
+D: Some 8-bit XT disk driver and devfs hacking
D: Aladdin 1533/1543(C) chipset IDE
D: PIIX chipset IDE
S: ul. Matemblewska 1B/10
@@ -2463,7 +2474,7 @@
D: Logical Volume Manager
S: Bartningstr. 12
S: 64289 Darmstadt
-S: Germany
+S: Germany
N: Mark W. McClelland
E: mmcclell@bigfoot.com
@@ -2547,7 +2558,7 @@
P: 1024/04B6E8F5 6C 77 33 CA CC D6 22 03 AB AB 15 A3 AE AD 39 7D
D: Kernel hacker. PostgreSQL hacker. Software watchdog daemon.
D: Maintainer of several Debian packages
-S: Th.-Heuss-Str. 61
+S: Th.-Heuss-Str. 61
S: D-41812 Erkelenz
S: Germany
@@ -2785,7 +2796,7 @@
W: http://www.i-Connect.Net/~mike/
D: Developer and maintainer of the EATA-DMA SCSI driver
D: Co-developer EATA-PIO SCSI driver
-D: /proc/scsi and assorted other snippets
+D: /proc/scsi and assorted other snippets
S: Zum Schiersteiner Grund 2
S: 55127 Mainz
S: Germany
@@ -2852,6 +2863,10 @@
N: Venkatesh Pallipadi (Venki)
D: x86/HPET
+N: Kyungmin Park
+E: kyungmin.park@samsung.com
+D: Samsung S5Pv210 and Exynos4210 mobile platforms
+
N: David Parsons
E: orc@pell.chi.il.us
D: improved memory detection code.
@@ -3019,7 +3034,7 @@
S: Chandler, Arizona 85249
S: USA
-N: Frederic Potter
+N: Frederic Potter
E: fpotter@cirpack.com
D: Some PCI kernel support
@@ -3452,21 +3467,21 @@
S: 76131 Karlsruhe
S: Germany
-N: James Simmons
+N: James Simmons
E: jsimmons@infradead.org
-E: jsimmons@users.sf.net
+E: jsimmons@users.sf.net
D: Frame buffer device maintainer
D: input layer development
D: tty/console layer
-D: various mipsel devices
-S: 115 Carmel Avenue
+D: various mipsel devices
+S: 115 Carmel Avenue
S: El Cerrito CA 94530
-S: USA
+S: USA
N: Jaspreet Singh
E: jaspreet@sangoma.com
W: www.sangoma.com
-D: WANPIPE drivers & API Support for Sangoma S508/FT1 cards
+D: WANPIPE drivers & API Support for Sangoma S508/FT1 cards
S: Sangoma Technologies Inc.,
S: 1001 Denison Street
S: Suite 101
@@ -3490,7 +3505,7 @@
E: csmall@triode.apana.org.au
E: vk2xlz@gonzo.vk2xlz.ampr.org (packet radio)
D: Gracilis PackeTwin device driver
-D: RSPF daemon
+D: RSPF daemon
S: 10 Stockalls Place
S: Minto, NSW, 2566
S: Australia
@@ -3700,7 +3715,7 @@
E: tsusheng@scf.usc.edu
D: IGMP(Internet Group Management Protocol) version 2
S: 2F 14 ALY 31 LN 166 SEC 1 SHIH-PEI RD
-S: Taipei
+S: Taipei
S: Taiwan 112
S: Republic of China
S: 24335 Delta Drive
@@ -3861,7 +3876,7 @@
D: patches for ghostscript, worked on color 'ls', etc.
S: 301 15th Street S.
S: Moorhead, Minnesota 56560
-S: USA
+S: USA
N: Jos Vos
E: jos@xos.nl
@@ -3869,7 +3884,7 @@
D: Various IP firewall updates, ipfwadm
S: X/OS Experts in Open Systems BV
S: Kruislaan 419
-S: 1098 VA Amsterdam
+S: 1098 VA Amsterdam
S: The Netherlands
N: Jeroen Vreeken
@@ -4107,7 +4122,7 @@
N: Victor Yodaiken
E: yodaiken@fsmlabs.com
D: RTLinux (RealTime Linux)
-S: POB 1822
+S: POB 1822
S: Socorro NM, 87801
S: USA
@@ -4205,7 +4220,7 @@
S: France
# Don't add your name here, unless you really _are_ after Marc
-# alphabetically. Leonard used to be very proud of being the
+# alphabetically. Leonard used to be very proud of being the
# last entry, and he'll get positively pissed if he can't even
# be second-to-last. (and this file really _is_ supposed to be
# in alphabetic order)
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-ioatdma b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
index 420c1d0..3a4e2cd 100644
--- a/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
+++ b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
@@ -1,29 +1,29 @@
-What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
Date: December 3, 2009
KernelVersion: 2.6.32
Contact: dmaengine@vger.kernel.org
Description: Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL,
DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT.
-What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
Date: December 3, 2009
KernelVersion: 2.6.32
Contact: dmaengine@vger.kernel.org
Description: The number of descriptors active in the ring.
-What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
Date: December 3, 2009
KernelVersion: 2.6.32
Contact: dmaengine@vger.kernel.org
Description: Descriptor ring size, total number of descriptors available.
-What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
Date: December 3, 2009
KernelVersion: 2.6.32
Contact: dmaengine@vger.kernel.org
Description: Version of ioatdma device.
-What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
Date: August 8, 2017
KernelVersion: 4.14
Contact: dmaengine@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
index a10a4de..c4a4497 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
+++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
@@ -109,30 +109,6 @@
When counting down the counter start from preset value
and fire event when reach 0.
-What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion: 4.12
-Contact: benjamin.gaignard@st.com
-Description:
- Reading returns the list possible quadrature modes.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion: 4.12
-Contact: benjamin.gaignard@st.com
-Description:
- Configure the device counter quadrature modes:
-
- channel_A:
- Encoder A input servers as the count input and B as
- the UP/DOWN direction control input.
-
- channel_B:
- Encoder B input serves as the count input and A as
- the UP/DOWN direction control input.
-
- quadrature:
- Encoder A and B inputs are mixed to get direction
- and count with a scale of 0.25.
-
What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
index 7670012..1f2002d 100644
--- a/Documentation/ABI/testing/sysfs-class-net
+++ b/Documentation/ABI/testing/sysfs-class-net
@@ -152,7 +152,7 @@
When an interface is under test, it cannot be expected
to pass packets as normal.
-What: /sys/clas/net/<iface>/duplex
+What: /sys/class/net/<iface>/duplex
Date: October 2009
KernelVersion: 2.6.33
Contact: netdev@vger.kernel.org
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 6a59a13..61a7310 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -26,6 +26,10 @@
PDFLATEX = xelatex
LATEXOPTS = -interaction=batchmode
+ifeq ($(KBUILD_VERBOSE),0)
+SPHINXOPTS += "-q"
+endif
+
# User-friendly check for sphinx-build
HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
diff --git a/Documentation/admin-guide/LSM/SafeSetID.rst b/Documentation/admin-guide/LSM/SafeSetID.rst
index 17996c9..0ec3486 100644
--- a/Documentation/admin-guide/LSM/SafeSetID.rst
+++ b/Documentation/admin-guide/LSM/SafeSetID.rst
@@ -107,7 +107,7 @@
privileges, such as allowing a user to set up user namespace UID/GID mappings.
Note on GID policies and setgroups()
-==================
+====================================
In v5.9 we are adding support for limiting CAP_SETGID privileges as was done
previously for CAP_SETUID. However, for compatibility with common sandboxing
related code conventions in userspace, we currently allow arbitrary
diff --git a/Documentation/admin-guide/bootconfig.rst b/Documentation/admin-guide/bootconfig.rst
index a22024f..9b90efc 100644
--- a/Documentation/admin-guide/bootconfig.rst
+++ b/Documentation/admin-guide/bootconfig.rst
@@ -137,15 +137,24 @@
==============================
Since the boot configuration file is loaded with initrd, it will be added
-to the end of the initrd (initramfs) image file with size, checksum and
-12-byte magic word as below.
+to the end of the initrd (initramfs) image file with padding, size,
+checksum and 12-byte magic word as below.
-[initrd][bootconfig][size(u32)][checksum(u32)][#BOOTCONFIG\n]
+[initrd][bootconfig][padding][size(le32)][checksum(le32)][#BOOTCONFIG\n]
+
+The size and checksum fields are unsigned 32bit little endian value.
+
+When the boot configuration is added to the initrd image, the total
+file size is aligned to 4 bytes. To fill the gap, null characters
+(``\0``) will be added. Thus the ``size`` is the length of the bootconfig
+file + padding bytes.
The Linux kernel decodes the last part of the initrd image in memory to
get the boot configuration data.
Because of this "piggyback" method, there is no need to change or
-update the boot loader and the kernel image itself.
+update the boot loader and the kernel image itself as long as the boot
+loader passes the correct initrd file size. If by any chance, the boot
+loader passes a longer size, the kernel feils to find the bootconfig data.
To do this operation, Linux kernel provides "bootconfig" command under
tools/bootconfig, which allows admin to apply or delete the config file
@@ -176,7 +185,8 @@
contain 256 key-value pairs. In most cases, the number of config items
will be under 100 entries and smaller than 8KB, so it would be enough.
If the node number exceeds 1024, parser returns an error even if the file
-size is smaller than 32KB.
+size is smaller than 32KB. (Note that this maximum size is not including
+the padding null characters.)
Anyway, since bootconfig command verifies it when appending a boot config
to initrd image, user can notice it before boot.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 526d65d..44fde25 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2858,6 +2858,8 @@
mds=off [X86]
tsx_async_abort=off [X86]
kvm.nx_huge_pages=off [X86]
+ no_entry_flush [PPC]
+ no_uaccess_flush [PPC]
Exceptions:
This does not have any effect on
@@ -3186,6 +3188,8 @@
noefi Disable EFI runtime services support.
+ no_entry_flush [PPC] Don't flush the L1-D cache when entering the kernel.
+
noexec [IA-64]
noexec [X86]
@@ -3235,6 +3239,9 @@
nospec_store_bypass_disable
[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+ no_uaccess_flush
+ [PPC] Don't flush the L1-D cache after accessing user data.
+
noxsave [BUGS=X86] Disables x86 extended register state save
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst
index 37940a0..10fde58 100644
--- a/Documentation/admin-guide/pm/cpuidle.rst
+++ b/Documentation/admin-guide/pm/cpuidle.rst
@@ -478,7 +478,7 @@
statistics of the given idle state. That information is exposed by the kernel
via ``sysfs``.
-For each CPU in the system, there is a :file:`/sys/devices/system/cpu<N>/cpuidle/`
+For each CPU in the system, there is a :file:`/sys/devices/system/cpu/cpu<N>/cpuidle/`
directory in ``sysfs``, where the number ``<N>`` is assigned to the given
CPU at the initialization time. That directory contains a set of subdirectories
called :file:`state0`, :file:`state1` and so on, up to the number of idle state
@@ -494,7 +494,7 @@
residency.
``below``
- Total number of times this idle state had been asked for, but cerainly
+ Total number of times this idle state had been asked for, but certainly
a deeper idle state would have been a better match for the observed idle
duration.
diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
index 57fd6ce..f2ab8a5 100644
--- a/Documentation/admin-guide/sysctl/net.rst
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -300,6 +300,7 @@
0: 0 1 2 3 4 5 6 7
RSS hash key:
84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89
+
netdev_tstamp_prequeue
----------------------
diff --git a/Documentation/arm/sunxi.rst b/Documentation/arm/sunxi.rst
index 62b533d..0c536ae 100644
--- a/Documentation/arm/sunxi.rst
+++ b/Documentation/arm/sunxi.rst
@@ -148,3 +148,13 @@
* User Manual
http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf
+
+ - Allwinner H6
+
+ * Datasheet
+
+ https://linux-sunxi.org/images/5/5c/Allwinner_H6_V200_Datasheet_V1.1.pdf
+
+ * User Manual
+
+ https://linux-sunxi.org/images/4/46/Allwinner_H6_V200_User_Manual_V1.1.pdf
diff --git a/Documentation/conf.py b/Documentation/conf.py
index 1e44983..ed2b43e 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -51,7 +51,7 @@
support for Sphinx v3.0 and above is brand new. Be prepared for
possible issues in the generated output.
''')
- if minor > 0 or patch >= 2:
+ if (major > 3) or (minor > 0 or patch >= 2):
# Sphinx c function parser is more pedantic with regards to type
# checking. Due to that, having macros at c:function cause problems.
# Those needed to be scaped by using c_id_attributes[] array
diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
index c09c9ca..2b68add 100644
--- a/Documentation/dev-tools/kasan.rst
+++ b/Documentation/dev-tools/kasan.rst
@@ -295,11 +295,13 @@
pass::
ok 28 - kmalloc_double_kzfree
+
or, if kmalloc failed::
# kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163
Expected ptr is not null, but is
not ok 4 - kmalloc_large_oob_right
+
or, if a KASAN report was expected, but not found::
# kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:629
diff --git a/Documentation/dev-tools/kunit/faq.rst b/Documentation/dev-tools/kunit/faq.rst
index 1628862..8d5029a 100644
--- a/Documentation/dev-tools/kunit/faq.rst
+++ b/Documentation/dev-tools/kunit/faq.rst
@@ -90,7 +90,7 @@
re-run kunit_tool.
5. Try to run ``make ARCH=um defconfig`` before running ``kunit.py run``. This
may help clean up any residual config items which could be causing problems.
-6. Finally, try running KUnit outside UML. KUnit and KUnit tests can run be
+6. Finally, try running KUnit outside UML. KUnit and KUnit tests can be
built into any kernel, or can be built as a module and loaded at runtime.
Doing so should allow you to determine if UML is causing the issue you're
seeing. When tests are built-in, they will execute when the kernel boots, and
diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst
index d23385e..454f307 100644
--- a/Documentation/dev-tools/kunit/start.rst
+++ b/Documentation/dev-tools/kunit/start.rst
@@ -197,7 +197,7 @@
config MISC_EXAMPLE_TEST
bool "Test for my example"
- depends on MISC_EXAMPLE && KUNIT
+ depends on MISC_EXAMPLE && KUNIT=y
and the following to ``drivers/misc/Makefile``:
diff --git a/Documentation/dev-tools/kunit/style.rst b/Documentation/dev-tools/kunit/style.rst
index da1d6f0..8dbcdc5 100644
--- a/Documentation/dev-tools/kunit/style.rst
+++ b/Documentation/dev-tools/kunit/style.rst
@@ -175,17 +175,17 @@
.. code-block:: none
- config FOO_KUNIT_TEST
- tristate "KUnit test for foo" if !KUNIT_ALL_TESTS
- depends on KUNIT
- default KUNIT_ALL_TESTS
- help
- This builds unit tests for foo.
+ config FOO_KUNIT_TEST
+ tristate "KUnit test for foo" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ This builds unit tests for foo.
- For more information on KUnit and unit tests in general, please refer
- to the KUnit documentation in Documentation/dev-tools/kunit
+ For more information on KUnit and unit tests in general, please refer
+ to the KUnit documentation in Documentation/dev-tools/kunit/.
- If unsure, say N
+ If unsure, say N.
Test File and Module Names
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index 961d3ea..9c28c51 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -92,7 +92,7 @@
the second parameter, in this case, is what the value is expected to be; the
last value is what the value actually is. If ``add`` passes all of these
expectations, the test case, ``add_test_basic`` will pass; if any one of these
-expectations fail, the test case will fail.
+expectations fails, the test case will fail.
It is important to understand that a test case *fails* when any expectation is
violated; however, the test will continue running, potentially trying other
@@ -202,7 +202,7 @@
kunit_test_suite(example_test_suite);
In the above example the test suite, ``example_test_suite``, would run the test
-cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``,
+cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``;
each would have ``example_test_init`` called immediately before it and would
have ``example_test_exit`` called immediately after it.
``kunit_test_suite(example_test_suite)`` registers the test suite with the
@@ -229,7 +229,7 @@
such that the definition of that function can be changed without affecting the
rest of the code base. In the kernel this primarily comes from two constructs,
classes, structs that contain function pointers that are provided by the
-implementer, and architecture specific functions which have definitions selected
+implementer, and architecture-specific functions which have definitions selected
at compile time.
Classes
@@ -459,7 +459,7 @@
By default KUnit uses UML as a way to provide dependencies for code under test.
Under most circumstances KUnit's usage of UML should be treated as an
implementation detail of how KUnit works under the hood. Nevertheless, there
-are instances where being able to run architecture specific code or test
+are instances where being able to run architecture-specific code or test
against real hardware is desirable. For these reasons KUnit supports running on
other architectures.
@@ -561,6 +561,11 @@
...will run the tests.
+.. note::
+ Note that you should make sure your test depends on ``KUNIT=y`` in Kconfig
+ if the test does not support module build. Otherwise, it will trigger
+ compile errors if ``CONFIG_KUNIT`` is ``m``.
+
Writing new tests for other architectures
-----------------------------------------
@@ -594,7 +599,7 @@
hardware state in between test cases; if this is not possible, you may only be
able to run one test case per invocation.
-.. TODO(brendanhiggins@google.com): Add an actual example of an architecture
+.. TODO(brendanhiggins@google.com): Add an actual example of an architecture-
dependent KUnit test.
KUnit debugfs representation
diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
index ef3deb7..17ac4a3 100644
--- a/Documentation/devicetree/bindings/clock/hi6220-clock.txt
+++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
@@ -4,7 +4,7 @@
please refer the following document to know more about the binding rules
for these system controllers:
-Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
Required Properties:
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
index 4d9e7c7..90775c2 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -57,7 +57,7 @@
};
can@53fc8000 {
- compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index 03a7672..7ce06f9 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -76,6 +76,12 @@
resets:
maxItems: 1
+ wifi-2.4ghz-coexistence:
+ type: boolean
+ description: >
+ Should the pixel frequencies in the WiFi frequencies range be
+ avoided?
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
index f6c3fcc..b5af120 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -32,6 +32,11 @@
| | vint | bit | | 0 |.....|63| vintx |
| +--------------+ +------------+ |
| |
+ | Unmap |
+ | +--------------+ |
+ Unmapped events ---->| | umapidx |-------------------------> Globalevents
+ | +--------------+ |
+ | |
+-----------------------------------------+
Configuration of these Intmap registers that maps global events to vint is
@@ -70,6 +75,11 @@
- description: |
"limit" specifies the limit for translation
+ ti,unmapped-event-sources:
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ description:
+ Array of phandles to DMA controllers where the unmapped events originate.
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml
new file mode 100644
index 0000000..9cf2ae0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Generic Binding
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+ $nodename:
+ pattern: "^can(@.*)?$"
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
new file mode 100644
index 0000000..13875ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx8qm-flexcan
+ - fsl,imx8mp-flexcan
+ - fsl,imx6q-flexcan
+ - fsl,imx28-flexcan
+ - fsl,imx25-flexcan
+ - fsl,p1010-flexcan
+ - fsl,vf610-flexcan
+ - fsl,ls1021ar2-flexcan
+ - fsl,lx2160ar1-flexcan
+ - items:
+ - enum:
+ - fsl,imx53-flexcan
+ - fsl,imx35-flexcan
+ - const: fsl,imx25-flexcan
+ - items:
+ - enum:
+ - fsl,imx7d-flexcan
+ - fsl,imx6ul-flexcan
+ - fsl,imx6sx-flexcan
+ - const: fsl,imx6q-flexcan
+ - items:
+ - enum:
+ - fsl,ls1028ar1-flexcan
+ - const: fsl,lx2160ar1-flexcan
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+
+ clock-frequency:
+ description: |
+ The oscillator frequency driving the flexcan device, filled in by the
+ boot loader. This property should only be used the used operating system
+ doesn't support the clocks and clock-names property.
+
+ xceiver-supply:
+ description: Regulator that powers the CAN transceiver.
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ This means the registers of FlexCAN controller are big endian. This is
+ optional property.i.e. if this property is not present in device tree
+ node then controller is assumed to be little endian. If this property is
+ present then controller is assumed to be big endian.
+
+ fsl,stop-mode:
+ description: |
+ Register bits of stop mode control.
+
+ The format should be as follows:
+ <gpr req_gpr req_bit>
+ gpr is the phandle to general purpose register node.
+ req_gpr is the gpr register offset of CAN stop request.
+ req_bit is the bit offset of CAN stop request.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: The 'gpr' is the phandle to general purpose register node.
+ - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+ maximum: 0xff
+ - description: The 'req_bit' is the bit offset of CAN stop request.
+ maximum: 0x1f
+
+ fsl,clk-source:
+ description: |
+ Select the clock source to the CAN Protocol Engine (PE). It's SoC
+ implementation dependent. Refer to RM for detailed definition. If this
+ property is not set in device tree node then driver selects clock source 1
+ by default.
+ 0: clock source 0 (oscillator clock)
+ 1: clock source 1 (peripheral clock)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ minimum: 0
+ maximum: 1
+
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable CAN remote wakeup.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <200000000>;
+ fsl,clk-source = <0>;
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ can@2090000 {
+ compatible = "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 1>, <&clks 2>;
+ clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 28>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
deleted file mode 100644
index e10b6eb..0000000
--- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
-
-Required properties:
-
-- compatible : Should be "fsl,<processor>-flexcan"
-
- where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
- vf610, ls1021ar2, lx2160ar1, ls1028ar1.
-
- The ls1028ar1 must be followed by lx2160ar1, e.g.
- - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
-
- An implementation should also claim any of the following compatibles
- that it is fully backwards compatible with:
-
- - fsl,p1010-flexcan
-
-- reg : Offset and length of the register set for this device
-- interrupts : Interrupt tuple for this device
-
-Optional properties:
-
-- clock-frequency : The oscillator frequency driving the flexcan device
-
-- xceiver-supply: Regulator that powers the CAN transceiver
-
-- big-endian: This means the registers of FlexCAN controller are big endian.
- This is optional property.i.e. if this property is not present in
- device tree node then controller is assumed to be little endian.
- if this property is present then controller is assumed to be big
- endian.
-
-- fsl,stop-mode: register bits of stop mode control, the format is
- <&gpr req_gpr req_bit>.
- gpr is the phandle to general purpose register node.
- req_gpr is the gpr register offset of CAN stop request.
- req_bit is the bit offset of CAN stop request.
-
-- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
- It's SoC Implementation dependent. Refer to RM for detailed
- definition. If this property is not set in device tree node
- then driver selects clock source 1 by default.
- 0: clock source 0 (oscillator clock)
- 1: clock source 1 (peripheral clock)
-
-- wakeup-source: enable CAN remote wakeup
-
-Example:
-
- can@1c000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1c000 0x1000>;
- interrupts = <48 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <200000000>; // filled in by bootloader
- fsl,clk-source = <0>; // select clock source 0 for PE
- };
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 3613c2c..0968b40 100644
--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -33,7 +33,7 @@
spi-max-frequency = <10000000>;
bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
interrupt-parent = <&gpio1>;
- interrupts = <14 GPIO_ACTIVE_LOW>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
index cfaf889..9e4dc51 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -25,7 +25,7 @@
clock-frequency = <100000>;
interrupt-parent = <&gpio1>;
- interrupts = <29 GPIO_ACTIVE_HIGH>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
index 92f399e..2bd8256 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -25,7 +25,7 @@
clock-frequency = <400000>;
interrupt-parent = <&gpio1>;
- interrupts = <17 GPIO_ACTIVE_HIGH>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt
index fcfd02d..e498966 100644
--- a/Documentation/devicetree/bindings/sound/rt1015.txt
+++ b/Documentation/devicetree/bindings/sound/rt1015.txt
@@ -8,10 +8,16 @@
- reg : The I2C address of the device.
+Optional properties:
+
+- realtek,power-up-delay-ms
+ Set a delay time for flush work to be completed,
+ this value is adjustable depending on platform.
Example:
rt1015: codec@28 {
compatible = "realtek,rt1015";
reg = <0x28>;
+ realtek,power-up-delay-ms = <50>;
};
diff --git a/Documentation/driver-api/media/drivers/vidtv.rst b/Documentation/driver-api/media/drivers/vidtv.rst
index 6511544..673bdff 100644
--- a/Documentation/driver-api/media/drivers/vidtv.rst
+++ b/Documentation/driver-api/media/drivers/vidtv.rst
@@ -149,11 +149,11 @@
Because the generator is implemented in a separate file, it can be
reused elsewhere in the media subsystem.
- Currently vidtv supports working with 3 PSI tables: PAT, PMT and
- SDT.
+ Currently vidtv supports working with 5 PSI tables: PAT, PMT,
+ SDT, NIT and EIT.
The specification for PAT and PMT can be found in *ISO 13818-1:
- Systems*, while the specification for the SDT can be found in *ETSI
+ Systems*, while the specification for the SDT, NIT, EIT can be found in *ETSI
EN 300 468: Specification for Service Information (SI) in DVB
systems*.
@@ -197,6 +197,8 @@
#. Their programs will be concatenated to populate the PAT
+ #. Their events will be concatenated to populate the EIT
+
#. For each program in the PAT, a PMT section will be created
#. The PMT section for a channel will be assigned its streams.
@@ -256,6 +258,42 @@
The first step to check whether the demod loaded successfully is to run::
$ dvb-fe-tool
+ Device Dummy demod for DVB-T/T2/C/S/S2 (/dev/dvb/adapter0/frontend0) capabilities:
+ CAN_FEC_1_2
+ CAN_FEC_2_3
+ CAN_FEC_3_4
+ CAN_FEC_4_5
+ CAN_FEC_5_6
+ CAN_FEC_6_7
+ CAN_FEC_7_8
+ CAN_FEC_8_9
+ CAN_FEC_AUTO
+ CAN_GUARD_INTERVAL_AUTO
+ CAN_HIERARCHY_AUTO
+ CAN_INVERSION_AUTO
+ CAN_QAM_16
+ CAN_QAM_32
+ CAN_QAM_64
+ CAN_QAM_128
+ CAN_QAM_256
+ CAN_QAM_AUTO
+ CAN_QPSK
+ CAN_TRANSMISSION_MODE_AUTO
+ DVB API Version 5.11, Current v5 delivery system: DVBC/ANNEX_A
+ Supported delivery systems:
+ DVBT
+ DVBT2
+ [DVBC/ANNEX_A]
+ DVBS
+ DVBS2
+ Frequency range for the current standard:
+ From: 51.0 MHz
+ To: 2.15 GHz
+ Step: 62.5 kHz
+ Tolerance: 29.5 MHz
+ Symbol rate ranges for the current standard:
+ From: 1.00 MBauds
+ To: 45.0 MBauds
This should return what is currently set up at the demod struct, i.e.::
@@ -314,7 +352,7 @@
here's an example::
[Channel]
- FREQUENCY = 330000000
+ FREQUENCY = 474000000
MODULATION = QAM/AUTO
SYMBOL_RATE = 6940000
INNER_FEC = AUTO
@@ -335,6 +373,14 @@
Assuming this channel is named 'channel.conf', you can then run::
$ dvbv5-scan channel.conf
+ dvbv5-scan ~/vidtv.conf
+ ERROR command BANDWIDTH_HZ (5) not found during retrieve
+ Cannot calc frequency shift. Either bandwidth/symbol-rate is unavailable (yet).
+ Scanning frequency #1 330000000
+ (0x00) Signal= -68.00dBm
+ Scanning frequency #2 474000000
+ Lock (0x1f) Signal= -34.45dBm C/N= 33.74dB UCB= 0
+ Service Beethoven, provider LinuxTV.org: digital television
For more information on dvb-scan, check its documentation online here:
`dvb-scan Documentation <https://www.linuxtv.org/wiki/index.php/Dvbscan>`_.
@@ -344,23 +390,38 @@
dvbv5-zap is a command line tool that can be used to record MPEG-TS to disk. The
typical use is to tune into a channel and put it into record mode. The example
-below - which is taken from the documentation - illustrates that::
+below - which is taken from the documentation - illustrates that\ [1]_::
- $ dvbv5-zap -c dvb_channel.conf "trilhas sonoras" -r
- using demux '/dev/dvb/adapter0/demux0'
+ $ dvbv5-zap -c dvb_channel.conf "beethoven" -o music.ts -P -t 10
+ using demux 'dvb0.demux0'
reading channels from file 'dvb_channel.conf'
- service has pid type 05: 204
- tuning to 573000000 Hz
- audio pid 104
- dvb_set_pesfilter 104
- Lock (0x1f) Quality= Good Signal= 100.00% C/N= -13.80dB UCB= 70 postBER= 3.14x10^-3 PER= 0
- DVR interface '/dev/dvb/adapter0/dvr0' can now be opened
+ tuning to 474000000 Hz
+ pass all PID's to TS
+ dvb_set_pesfilter 8192
+ dvb_dev_set_bufsize: buffer set to 6160384
+ Lock (0x1f) Quality= Good Signal= -34.66dBm C/N= 33.41dB UCB= 0 postBER= 0 preBER= 1.05x10^-3 PER= 0
+ Lock (0x1f) Quality= Good Signal= -34.57dBm C/N= 33.46dB UCB= 0 postBER= 0 preBER= 1.05x10^-3 PER= 0
+ Record to file 'music.ts' started
+ received 24587768 bytes (2401 Kbytes/sec)
+ Lock (0x1f) Quality= Good Signal= -34.42dBm C/N= 33.89dB UCB= 0 postBER= 0 preBER= 2.44x10^-3 PER= 0
-The channel can be watched by playing the contents of the DVR interface, with
-some player that recognizes the MPEG-TS format, such as *mplayer* or *vlc*.
+.. [1] In this example, it records 10 seconds with all program ID's stored
+ at the music.ts file.
+
+
+The channel can be watched by playing the contents of the stream with some
+player that recognizes the MPEG-TS format, such as ``mplayer`` or ``vlc``.
By playing the contents of the stream one can visually inspect the workings of
-vidtv, e.g.::
+vidtv, e.g., to play a recorded TS file with::
+
+ $ mplayer music.ts
+
+or, alternatively, running this command on one terminal::
+
+ $ dvbv5-zap -c dvb_channel.conf "beethoven" -P -r &
+
+And, on a second terminal, playing the contents from DVR interface with::
$ mplayer /dev/dvb/adapter0/dvr0
@@ -423,3 +484,30 @@
- Updating the error statistics accordingly (e.g. BER, etc).
- Simulating some noise in the encoded data.
+
+Functions and structs used within vidtv
+---------------------------------------
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_bridge.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_channel.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_demod.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_encoder.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_mux.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_pes.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_psi.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_s302m.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_ts.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.h
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_common.c
+
+.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.c
diff --git a/Documentation/filesystems/api-summary.rst b/Documentation/filesystems/api-summary.rst
index bbb0c1c..a94f17d 100644
--- a/Documentation/filesystems/api-summary.rst
+++ b/Documentation/filesystems/api-summary.rst
@@ -86,9 +86,6 @@
.. kernel-doc:: fs/dax.c
:export:
-.. kernel-doc:: fs/direct-io.c
- :export:
-
.. kernel-doc:: fs/libfs.c
:export:
diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst
index 805a1e9..849d5b1 100644
--- a/Documentation/filesystems/ext4/journal.rst
+++ b/Documentation/filesystems/ext4/journal.rst
@@ -256,6 +256,10 @@
- s\_padding2
-
* - 0x54
+ - \_\_be32
+ - s\_num\_fc\_blocks
+ - Number of fast commit blocks in the journal.
+ * - 0x58
- \_\_u32
- s\_padding[42]
-
@@ -310,6 +314,8 @@
- This journal uses v3 of the checksum on-disk format. This is the same as
v2, but the journal block tag size is fixed regardless of the size of
block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3)
+ * - 0x20
+ - Journal has fast commit blocks. (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT)
.. _jbd2_checksum_type:
diff --git a/Documentation/filesystems/ext4/super.rst b/Documentation/filesystems/ext4/super.rst
index 93e55d7..2eb1ab2 100644
--- a/Documentation/filesystems/ext4/super.rst
+++ b/Documentation/filesystems/ext4/super.rst
@@ -596,6 +596,13 @@
- Sparse Super Block, v2. If this flag is set, the SB field s\_backup\_bgs
points to the two block groups that contain backup superblocks
(COMPAT\_SPARSE\_SUPER2).
+ * - 0x400
+ - Fast commits supported. Although fast commits blocks are
+ backward incompatible, fast commit blocks are not always
+ present in the journal. If fast commit blocks are present in
+ the journal, JBD2 incompat feature
+ (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) gets
+ set (COMPAT\_FAST\_COMMIT).
.. _super_incompat:
diff --git a/Documentation/filesystems/journalling.rst b/Documentation/filesystems/journalling.rst
index 5a5f70b..e18f90f 100644
--- a/Documentation/filesystems/journalling.rst
+++ b/Documentation/filesystems/journalling.rst
@@ -136,10 +136,8 @@
~~~~~~~~~~~~
JBD2 to also allows you to perform file-system specific delta commits known as
-fast commits. In order to use fast commits, you first need to call
-:c:func:`jbd2_fc_init` and tell how many blocks at the end of journal
-area should be reserved for fast commits. Along with that, you will also need
-to set following callbacks that perform correspodning work:
+fast commits. In order to use fast commits, you will need to set following
+callbacks that perform correspodning work:
`journal->j_fc_cleanup_cb`: Cleanup function called after every full commit and
fast commit.
diff --git a/Documentation/firmware-guide/acpi/acpi-lid.rst b/Documentation/firmware-guide/acpi/acpi-lid.rst
index 874ce0e..71b9af1 100644
--- a/Documentation/firmware-guide/acpi/acpi-lid.rst
+++ b/Documentation/firmware-guide/acpi/acpi-lid.rst
@@ -19,9 +19,9 @@
For most platforms, both the _LID method and the lid notifications are
reliable. However, there are exceptions. In order to work with these
-exceptional buggy platforms, special restrictions and expections should be
+exceptional buggy platforms, special restrictions and exceptions should be
taken into account. This document describes the restrictions and the
-expections of the Linux ACPI lid device driver.
+exceptions of the Linux ACPI lid device driver.
Restrictions of the returning value of the _LID control method
@@ -46,7 +46,7 @@
trigger some system power saving operations on Windows. Since it is fully
tested, it is reliable from all AML tables.
-Expections for the userspace users of the ACPI lid device driver
+Exceptions for the userspace users of the ACPI lid device driver
================================================================
The ACPI button driver exports the lid state to the userspace via the
@@ -100,7 +100,7 @@
C. button.lid_init_state=ignore:
When this option is specified, the ACPI button driver never reports the
initial lid state and there is a compensation mechanism implemented to
- ensure that the reliable "closed" notifications can always be delievered
+ ensure that the reliable "closed" notifications can always be delivered
to the userspace by always pairing "closed" input events with complement
"opened" input events. But there is still no guarantee that the "opened"
notifications can be delivered to the userspace when the lid is actually
diff --git a/Documentation/firmware-guide/acpi/gpio-properties.rst b/Documentation/firmware-guide/acpi/gpio-properties.rst
index bb6d74f..59aad61 100644
--- a/Documentation/firmware-guide/acpi/gpio-properties.rst
+++ b/Documentation/firmware-guide/acpi/gpio-properties.rst
@@ -20,9 +20,9 @@
Name (_CRS, ResourceTemplate ()
{
- GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+ GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionOutputOnly,
"\\_SB.GPO0", 0, ResourceConsumer) {15}
- GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+ GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionOutputOnly,
"\\_SB.GPO0", 0, ResourceConsumer) {27, 31}
})
@@ -49,15 +49,41 @@
pin
Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
active_low
- If 1 the GPIO is marked as active_low.
+ If 1, the GPIO is marked as active_low.
Since ACPI GpioIo() resource does not have a field saying whether it is
active low or high, the "active_low" argument can be used here. Setting
it to 1 marks the GPIO as active low.
+Note, active_low in _DSD does not make sense for GpioInt() resource and
+must be 0. GpioInt() resource has its own means of defining it.
+
In our Bluetooth example the "reset-gpios" refers to the second GpioIo()
resource, second pin in that resource with the GPIO number of 31.
+The GpioIo() resource unfortunately doesn't explicitly provide an initial
+state of the output pin which driver should use during its initialization.
+
+Linux tries to use common sense here and derives the state from the bias
+and polarity settings. The table below shows the expectations:
+
+========= ============= ==============
+Pull Bias Polarity Requested...
+========= ============= ==============
+Implicit x AS IS (assumed firmware configured for us)
+Explicit x (no _DSD) as Pull Bias (Up == High, Down == Low),
+ assuming non-active (Polarity = !Pull Bias)
+Down Low as low, assuming active
+Down High as low, assuming non-active
+Up Low as high, assuming non-active
+Up High as high, assuming active
+========= ============= ==============
+
+That said, for our above example the both GPIOs, since the bias setting
+is explicit and _DSD is present, will be treated as active with a high
+polarity and Linux will configure the pins in this state until a driver
+reprograms them differently.
+
It is possible to leave holes in the array of GPIOs. This is useful in
cases like with SPI host controllers where some chip selects may be
implemented as GPIOs and some as native signals. For example a SPI host
@@ -112,8 +138,8 @@
Package () {
"gpio-line-names",
Package () {
- "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD", "MUX7_IO",
- "LVL_C_A1", "MUX0_IO", "SPI1_MISO"
+ "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD",
+ "MUX7_IO", "LVL_C_A1", "MUX0_IO", "SPI1_MISO",
}
}
@@ -137,7 +163,7 @@
mapping between those names and the ACPI GPIO resources corresponding to them.
To do that, the driver needs to define a mapping table as a NULL-terminated
-array of struct acpi_gpio_mapping objects that each contain a name, a pointer
+array of struct acpi_gpio_mapping objects that each contains a name, a pointer
to an array of line data (struct acpi_gpio_params) objects and the size of that
array. Each struct acpi_gpio_params object consists of three fields,
crs_entry_index, line_index, active_low, representing the index of the target
@@ -154,13 +180,14 @@
static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = {
{ "reset-gpios", &reset_gpio, 1 },
{ "shutdown-gpios", &shutdown_gpio, 1 },
- { },
+ { }
};
Next, the mapping table needs to be passed as the second argument to
-acpi_dev_add_driver_gpios() that will register it with the ACPI device object
-pointed to by its first argument. That should be done in the driver's .probe()
-routine. On removal, the driver should unregister its GPIO mapping table by
+acpi_dev_add_driver_gpios() or its managed analogue that will
+register it with the ACPI device object pointed to by its first
+argument. That should be done in the driver's .probe() routine.
+On removal, the driver should unregister its GPIO mapping table by
calling acpi_dev_remove_driver_gpios() on the ACPI device object where that
table was previously registered.
@@ -191,12 +218,12 @@
but since there is no way to know the mapping between "reset" and
the GpioIo() in _CRS desc will hold ERR_PTR(-ENOENT).
-The driver author can solve this by passing the mapping explictly
-(the recommended way and documented in the above chapter).
+The driver author can solve this by passing the mapping explicitly
+(this is the recommended way and it's documented in the above chapter).
The ACPI GPIO mapping tables should not contaminate drivers that are not
knowing about which exact device they are servicing on. It implies that
-the ACPI GPIO mapping tables are hardly linked to ACPI ID and certain
+the ACPI GPIO mapping tables are hardly linked to an ACPI ID and certain
objects, as listed in the above chapter, of the device in question.
Getting GPIO descriptor
@@ -229,5 +256,5 @@
Be aware that gpiod_get_index() in cases 1 and 2, assuming that there
are two versions of ACPI device description provided and no mapping is
present in the driver, will return different resources. That's why a
-certain driver has to handle them carefully as explained in previous
+certain driver has to handle them carefully as explained in the previous
chapter.
diff --git a/Documentation/firmware-guide/acpi/method-tracing.rst b/Documentation/firmware-guide/acpi/method-tracing.rst
index 0aa7e2c..6ab6c096 100644
--- a/Documentation/firmware-guide/acpi/method-tracing.rst
+++ b/Documentation/firmware-guide/acpi/method-tracing.rst
@@ -98,7 +98,7 @@
[ 0.188903] exdebug-0398 ex_trace_point : Method End [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
Developers can utilize these special log entries to track the AML
-interpretion, thus can aid issue debugging and performance tuning. Note
+interpretation, thus can aid issue debugging and performance tuning. Note
that, as the "AML tracer" logs are implemented via ACPI_DEBUG_PRINT()
macro, CONFIG_ACPI_DEBUG is also required to be enabled for enabling
"AML tracer" logs.
diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst
index 1f9ea82..2062a60 100644
--- a/Documentation/gpu/amdgpu.rst
+++ b/Documentation/gpu/amdgpu.rst
@@ -83,10 +83,6 @@
===================
.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
- :doc: AMDGPU XGMI Support
-
-.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
- :internal:
AMDGPU RAS Support
==================
@@ -124,9 +120,6 @@
.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
:doc: AMDGPU RAS sysfs gpu_vram_bad_pages Interface
-.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
- :internal:
-
Sample Code
-----------
Sample code for testing error injection can be found here:
diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst
index 9257f8a..2b87701 100644
--- a/Documentation/hwmon/adm1266.rst
+++ b/Documentation/hwmon/adm1266.rst
@@ -20,7 +20,7 @@
integrated 12 bit SAR ADC, accessed using a PMBus interface.
The driver is a client driver to the core PMBus driver. Please see
-Documentation/hwmon/pmbus for details on PMBus client drivers.
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
Sysfs entries
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index e6b91ab..b797db7 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -132,6 +132,7 @@
mcp3021
menf21bmc
mlxreg-fan
+ mp2975
nct6683
nct6775
nct7802
diff --git a/Documentation/hwmon/mp2975.rst b/Documentation/hwmon/mp2975.rst
index 5b0609c..81d816b 100644
--- a/Documentation/hwmon/mp2975.rst
+++ b/Documentation/hwmon/mp2975.rst
@@ -20,6 +20,7 @@
vendor dual-loop, digital, multi-phase controller MP2975.
This device:
+
- Supports up to two power rail.
- Provides 8 pulse-width modulations (PWMs), and can be configured up
to 8-phase operation for rail 1 and up to 4-phase operation for rail
@@ -32,10 +33,12 @@
10-mV DAC, IMVP9 mode with 5-mV DAC.
Device supports:
+
- SVID interface.
- AVSBus interface.
Device complaint with:
+
- PMBus rev 1.3 interface.
Device supports direct format for reading output current, output voltage,
@@ -45,11 +48,14 @@
The below VID modes are supported: VR12, VR13, IMVP9.
The driver provides the next attributes for the current:
+
- for current in: input, maximum alarm;
- for current out input, maximum alarm and highest values;
- for phase current: input and label.
-attributes.
+ attributes.
+
The driver exports the following attributes via the 'sysfs' files, where
+
- 'n' is number of telemetry pages (from 1 to 2);
- 'k' is number of configured phases (from 1 to 8);
- indexes 1, 1*n for "iin";
@@ -65,11 +71,14 @@
**curr[1-{2n+k}]_label**
The driver provides the next attributes for the voltage:
+
- for voltage in: input, high critical threshold, high critical alarm, all only
from page 0;
- for voltage out: input, low and high critical thresholds, low and high
critical alarms, from pages 0 and 1;
+
The driver exports the following attributes via the 'sysfs' files, where
+
- 'n' is number of telemetry pages (from 1 to 2);
- indexes 1 for "iin";
- indexes n+1, n+2 for "vout";
@@ -87,9 +96,12 @@
**in[2-{n+1}1_lcrit_alarm**
The driver provides the next attributes for the power:
+
- for power in alarm and input.
- for power out: highest and input.
+
The driver exports the following attributes via the 'sysfs' files, where
+
- 'n' is number of telemetry pages (from 1 to 2);
- indexes 1 for "pin";
- indexes n+1, n+2 for "pout";
diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst
index cf3ca23..21c8478 100644
--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -57,9 +57,8 @@
They can be enabled individually. The full list of the parameters: ::
make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \
- OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \
- READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \
- HOSTLD=ld.lld
+ OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump READELF=llvm-readelf \
+ HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar HOSTLD=ld.lld
Currently, the integrated assembler is disabled by default. You can pass
``LLVM_IAS=1`` to enable it.
diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
index 53e6090..e5d63b9 100644
--- a/Documentation/leds/index.rst
+++ b/Documentation/leds/index.rst
@@ -25,3 +25,4 @@
leds-lp5562
leds-lp55xx
leds-mlxcpld
+ leds-sc27xx
diff --git a/Documentation/locking/lockdep-design.rst b/Documentation/locking/lockdep-design.rst
index cec03bd1..9f3cfca 100644
--- a/Documentation/locking/lockdep-design.rst
+++ b/Documentation/locking/lockdep-design.rst
@@ -42,6 +42,7 @@
(4 usages * n STATEs + 1) categories:
where the 4 usages can be:
+
- 'ever held in STATE context'
- 'ever held as readlock in STATE context'
- 'ever held with STATE enabled'
@@ -49,10 +50,12 @@
where the n STATEs are coded in kernel/locking/lockdep_states.h and as of
now they include:
+
- hardirq
- softirq
where the last 1 category is:
+
- 'ever used' [ == !unused ]
When locking rules are violated, these usage bits are presented in the
@@ -96,9 +99,9 @@
+--------------+-------------+--------------+
| | irq enabled | irq disabled |
+--------------+-------------+--------------+
- | ever in irq | ? | - |
+ | ever in irq | '?' | '-' |
+--------------+-------------+--------------+
- | never in irq | + | . |
+ | never in irq | '+' | '.' |
+--------------+-------------+--------------+
The character '-' suggests irq is disabled because if otherwise the
@@ -216,7 +219,7 @@
BD_MUTEX_PARTITION
};
-mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION);
+ mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION);
In this case the locking is done on a bdev object that is known to be a
partition.
@@ -334,7 +337,7 @@
----------------
The validator tracks a maximum of MAX_LOCKDEP_KEYS number of lock classes.
-Exceeding this number will trigger the following lockdep warning:
+Exceeding this number will trigger the following lockdep warning::
(DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS))
@@ -420,7 +423,8 @@
The difference between recursive readers and non-recursive readers is because:
recursive readers get blocked only by a write lock *holder*, while non-recursive
-readers could get blocked by a write lock *waiter*. Considering the follow example:
+readers could get blocked by a write lock *waiter*. Considering the follow
+example::
TASK A: TASK B:
@@ -448,20 +452,22 @@
Block condition matrix, Y means the row blocks the column, and N means otherwise.
- | E | r | R |
+---+---+---+---+
- E | Y | Y | Y |
+ | | E | r | R |
+---+---+---+---+
- r | Y | Y | N |
+ | E | Y | Y | Y |
+---+---+---+---+
- R | Y | Y | N |
+ | r | Y | Y | N |
+ +---+---+---+---+
+ | R | Y | Y | N |
+ +---+---+---+---+
(W: writers, r: non-recursive readers, R: recursive readers)
acquired recursively. Unlike non-recursive read locks, recursive read locks
only get blocked by current write lock *holders* other than write lock
-*waiters*, for example:
+*waiters*, for example::
TASK A: TASK B:
@@ -491,7 +497,7 @@
even true for two non-recursive read locks). A non-recursive lock can block the
corresponding recursive lock, and vice versa.
-A deadlock case with recursive locks involved is as follow:
+A deadlock case with recursive locks involved is as follow::
TASK A: TASK B:
@@ -510,7 +516,7 @@
dependencies, but we can show that 4 types of lock dependencies are enough for
deadlock detection.
-For each lock dependency:
+For each lock dependency::
L1 -> L2
@@ -525,20 +531,25 @@
With the above combination for simplification, there are 4 types of dependency edges
in the lockdep graph:
-1) -(ER)->: exclusive writer to recursive reader dependency, "X -(ER)-> Y" means
+1) -(ER)->:
+ exclusive writer to recursive reader dependency, "X -(ER)-> Y" means
X -> Y and X is a writer and Y is a recursive reader.
-2) -(EN)->: exclusive writer to non-recursive locker dependency, "X -(EN)-> Y" means
+2) -(EN)->:
+ exclusive writer to non-recursive locker dependency, "X -(EN)-> Y" means
X -> Y and X is a writer and Y is either a writer or non-recursive reader.
-3) -(SR)->: shared reader to recursive reader dependency, "X -(SR)-> Y" means
+3) -(SR)->:
+ shared reader to recursive reader dependency, "X -(SR)-> Y" means
X -> Y and X is a reader (recursive or not) and Y is a recursive reader.
-4) -(SN)->: shared reader to non-recursive locker dependency, "X -(SN)-> Y" means
+4) -(SN)->:
+ shared reader to non-recursive locker dependency, "X -(SN)-> Y" means
X -> Y and X is a reader (recursive or not) and Y is either a writer or
non-recursive reader.
-Note that given two locks, they may have multiple dependencies between them, for example:
+Note that given two locks, they may have multiple dependencies between them,
+for example::
TASK A:
@@ -592,11 +603,11 @@
Proof for sufficiency (Lemma 1):
-Let's say we have a strong circle:
+Let's say we have a strong circle::
L1 -> L2 ... -> Ln -> L1
-, which means we have dependencies:
+, which means we have dependencies::
L1 -> L2
L2 -> L3
@@ -633,7 +644,7 @@
for a lock held by P1. Let's name the lock Px is waiting as Lx, so since P1 is waiting
for L1 and holding Ln, so we will have Ln -> L1 in the dependency graph. Similarly,
we have L1 -> L2, L2 -> L3, ..., Ln-1 -> Ln in the dependency graph, which means we
-have a circle:
+have a circle::
Ln -> L1 -> L2 -> ... -> Ln
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index 46072ce..64420b331 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -24,7 +24,6 @@
isl29003
lis3lv02d
max6875
- mic/index
pci-endpoint-test
spear-pcie-gadget
uacce
diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst
index b165181..a432dc4 100644
--- a/Documentation/networking/devlink/ice.rst
+++ b/Documentation/networking/devlink/ice.rst
@@ -70,6 +70,7 @@
that both the name (as reported by ``fw.app.name``) and version are
required to uniquely identify the package.
* - ``fw.app.bundle_id``
+ - running
- 0xc0000001
- Unique identifier for the DDP package loaded in the device. Also
referred to as the DDP Track ID. Can be used to uniquely identify
diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst
index f5be243..0a4b73b 100644
--- a/Documentation/networking/j1939.rst
+++ b/Documentation/networking/j1939.rst
@@ -10,9 +10,9 @@
SAE J1939 defines a higher layer protocol on CAN. It implements a more
sophisticated addressing scheme and extends the maximum packet size above 8
bytes. Several derived specifications exist, which differ from the original
-J1939 on the application level, like MilCAN A, NMEA2000 and especially
+J1939 on the application level, like MilCAN A, NMEA2000, and especially
ISO-11783 (ISOBUS). This last one specifies the so-called ETP (Extended
-Transport Protocol) which is has been included in this implementation. This
+Transport Protocol), which has been included in this implementation. This
results in a maximum packet size of ((2 ^ 24) - 1) * 7 bytes == 111 MiB.
Specifications used
@@ -32,15 +32,15 @@
addressing and transport methods used by J1939.
* **Addressing:** when a process on an ECU communicates via J1939, it should
- not necessarily know its source address. Although at least one process per
+ not necessarily know its source address. Although, at least one process per
ECU should know the source address. Other processes should be able to reuse
that address. This way, address parameters for different processes
cooperating for the same ECU, are not duplicated. This way of working is
- closely related to the UNIX concept where programs do just one thing, and do
+ closely related to the UNIX concept, where programs do just one thing and do
it well.
* **Dynamic addressing:** Address Claiming in J1939 is time critical.
- Furthermore data transport should be handled properly during the address
+ Furthermore, data transport should be handled properly during the address
negotiation. Putting this functionality in the kernel eliminates it as a
requirement for _every_ user space process that communicates via J1939. This
results in a consistent J1939 bus with proper addressing.
@@ -58,7 +58,7 @@
The J1939 sockets operate on CAN network devices (see SocketCAN). Any J1939
user space library operating on CAN raw sockets will still operate properly.
-Since such library does not communicate with the in-kernel implementation, care
+Since such a library does not communicate with the in-kernel implementation, care
must be taken that these two do not interfere. In practice, this means they
cannot share ECU addresses. A single ECU (or virtual ECU) address is used by
the library exclusively, or by the in-kernel system exclusively.
@@ -77,13 +77,13 @@
8 bits : PS (PDU Specific)
In J1939-21 distinction is made between PDU1 format (where PF < 240) and PDU2
-format (where PF >= 240). Furthermore, when using PDU2 format, the PS-field
+format (where PF >= 240). Furthermore, when using the PDU2 format, the PS-field
contains a so-called Group Extension, which is part of the PGN. When using PDU2
format, the Group Extension is set in the PS-field.
On the other hand, when using PDU1 format, the PS-field contains a so-called
Destination Address, which is _not_ part of the PGN. When communicating a PGN
-from user space to kernel (or visa versa) and PDU2 format is used, the PS-field
+from user space to kernel (or vice versa) and PDU2 format is used, the PS-field
of the PGN shall be set to zero. The Destination Address shall be set
elsewhere.
@@ -96,15 +96,15 @@
Both static and dynamic addressing methods can be used.
-For static addresses, no extra checks are made by the kernel, and provided
+For static addresses, no extra checks are made by the kernel and provided
addresses are considered right. This responsibility is for the OEM or system
integrator.
For dynamic addressing, so-called Address Claiming, extra support is foreseen
-in the kernel. In J1939 any ECU is known by it's 64-bit NAME. At the moment of
+in the kernel. In J1939 any ECU is known by its 64-bit NAME. At the moment of
a successful address claim, the kernel keeps track of both NAME and source
address being claimed. This serves as a base for filter schemes. By default,
-packets with a destination that is not locally, will be rejected.
+packets with a destination that is not locally will be rejected.
Mixed mode packets (from a static to a dynamic address or vice versa) are
allowed. The BSD sockets define separate API calls for getting/setting the
@@ -131,31 +131,31 @@
---------
On CAN, you first need to open a socket for communicating over a CAN network.
-To use J1939, #include <linux/can/j1939.h>. From there, <linux/can.h> will be
+To use J1939, ``#include <linux/can/j1939.h>``. From there, ``<linux/can.h>`` will be
included too. To open a socket, use:
.. code-block:: C
s = socket(PF_CAN, SOCK_DGRAM, CAN_J1939);
-J1939 does use SOCK_DGRAM sockets. In the J1939 specification, connections are
+J1939 does use ``SOCK_DGRAM`` sockets. In the J1939 specification, connections are
mentioned in the context of transport protocol sessions. These still deliver
-packets to the other end (using several CAN packets). SOCK_STREAM is not
+packets to the other end (using several CAN packets). ``SOCK_STREAM`` is not
supported.
-After the successful creation of the socket, you would normally use the bind(2)
-and/or connect(2) system call to bind the socket to a CAN interface. After
-binding and/or connecting the socket, you can read(2) and write(2) from/to the
-socket or use send(2), sendto(2), sendmsg(2) and the recv*() counterpart
+After the successful creation of the socket, you would normally use the ``bind(2)``
+and/or ``connect(2)`` system call to bind the socket to a CAN interface. After
+binding and/or connecting the socket, you can ``read(2)`` and ``write(2)`` from/to the
+socket or use ``send(2)``, ``sendto(2)``, ``sendmsg(2)`` and the ``recv*()`` counterpart
operations on the socket as usual. There are also J1939 specific socket options
described below.
-In order to send data, a bind(2) must have been successful. bind(2) assigns a
+In order to send data, a ``bind(2)`` must have been successful. ``bind(2)`` assigns a
local address to a socket.
-Different from CAN is that the payload data is just the data that get send,
-without it's header info. The header info is derived from the sockaddr supplied
-to bind(2), connect(2), sendto(2) and recvfrom(2). A write(2) with size 4 will
+Different from CAN is that the payload data is just the data that get sends,
+without its header info. The header info is derived from the sockaddr supplied
+to ``bind(2)``, ``connect(2)``, ``sendto(2)`` and ``recvfrom(2)``. A ``write(2)`` with size 4 will
result in a packet with 4 bytes.
The sockaddr structure has extensions for use with J1939 as specified below:
@@ -180,47 +180,47 @@
} can_addr;
}
-can_family & can_ifindex serve the same purpose as for other SocketCAN sockets.
+``can_family`` & ``can_ifindex`` serve the same purpose as for other SocketCAN sockets.
-can_addr.j1939.pgn specifies the PGN (max 0x3ffff). Individual bits are
+``can_addr.j1939.pgn`` specifies the PGN (max 0x3ffff). Individual bits are
specified above.
-can_addr.j1939.name contains the 64-bit J1939 NAME.
+``can_addr.j1939.name`` contains the 64-bit J1939 NAME.
-can_addr.j1939.addr contains the address.
+``can_addr.j1939.addr`` contains the address.
-The bind(2) system call assigns the local address, i.e. the source address when
-sending packages. If a PGN during bind(2) is set, it's used as a RX filter.
-I.e. only packets with a matching PGN are received. If an ADDR or NAME is set
+The ``bind(2)`` system call assigns the local address, i.e. the source address when
+sending packages. If a PGN during ``bind(2)`` is set, it's used as a RX filter.
+I.e. only packets with a matching PGN are received. If an ADDR or NAME is set
it is used as a receive filter, too. It will match the destination NAME or ADDR
of the incoming packet. The NAME filter will work only if appropriate Address
Claiming for this name was done on the CAN bus and registered/cached by the
kernel.
-On the other hand connect(2) assigns the remote address, i.e. the destination
-address. The PGN from connect(2) is used as the default PGN when sending
+On the other hand ``connect(2)`` assigns the remote address, i.e. the destination
+address. The PGN from ``connect(2)`` is used as the default PGN when sending
packets. If ADDR or NAME is set it will be used as the default destination ADDR
-or NAME. Further a set ADDR or NAME during connect(2) is used as a receive
+or NAME. Further a set ADDR or NAME during ``connect(2)`` is used as a receive
filter. It will match the source NAME or ADDR of the incoming packet.
-Both write(2) and send(2) will send a packet with local address from bind(2) and
-the remote address from connect(2). Use sendto(2) to overwrite the destination
+Both ``write(2)`` and ``send(2)`` will send a packet with local address from ``bind(2)`` and the
+remote address from ``connect(2)``. Use ``sendto(2)`` to overwrite the destination
address.
-If can_addr.j1939.name is set (!= 0) the NAME is looked up by the kernel and
-the corresponding ADDR is used. If can_addr.j1939.name is not set (== 0),
-can_addr.j1939.addr is used.
+If ``can_addr.j1939.name`` is set (!= 0) the NAME is looked up by the kernel and
+the corresponding ADDR is used. If ``can_addr.j1939.name`` is not set (== 0),
+``can_addr.j1939.addr`` is used.
When creating a socket, reasonable defaults are set. Some options can be
-modified with setsockopt(2) & getsockopt(2).
+modified with ``setsockopt(2)`` & ``getsockopt(2)``.
RX path related options:
-- SO_J1939_FILTER - configure array of filters
-- SO_J1939_PROMISC - disable filters set by bind(2) and connect(2)
+- ``SO_J1939_FILTER`` - configure array of filters
+- ``SO_J1939_PROMISC`` - disable filters set by ``bind(2)`` and ``connect(2)``
By default no broadcast packets can be send or received. To enable sending or
-receiving broadcast packets use the socket option SO_BROADCAST:
+receiving broadcast packets use the socket option ``SO_BROADCAST``:
.. code-block:: C
@@ -261,26 +261,26 @@
+---------------------------+
TX path related options:
-SO_J1939_SEND_PRIO - change default send priority for the socket
+``SO_J1939_SEND_PRIO`` - change default send priority for the socket
Message Flags during send() and Related System Calls
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-send(2), sendto(2) and sendmsg(2) take a 'flags' argument. Currently
+``send(2)``, ``sendto(2)`` and ``sendmsg(2)`` take a 'flags' argument. Currently
supported flags are:
-* MSG_DONTWAIT, i.e. non-blocking operation.
+* ``MSG_DONTWAIT``, i.e. non-blocking operation.
recvmsg(2)
^^^^^^^^^^
-In most cases recvmsg(2) is needed if you want to extract more information than
-recvfrom(2) can provide. For example package priority and timestamp. The
+In most cases ``recvmsg(2)`` is needed if you want to extract more information than
+``recvfrom(2)`` can provide. For example package priority and timestamp. The
Destination Address, name and packet priority (if applicable) are attached to
-the msghdr in the recvmsg(2) call. They can be extracted using cmsg(3) macros,
-with cmsg_level == SOL_J1939 && cmsg_type == SCM_J1939_DEST_ADDR,
-SCM_J1939_DEST_NAME or SCM_J1939_PRIO. The returned data is a uint8_t for
-priority and dst_addr, and uint64_t for dst_name.
+the msghdr in the ``recvmsg(2)`` call. They can be extracted using ``cmsg(3)`` macros,
+with ``cmsg_level == SOL_J1939 && cmsg_type == SCM_J1939_DEST_ADDR``,
+``SCM_J1939_DEST_NAME`` or ``SCM_J1939_PRIO``. The returned data is a ``uint8_t`` for
+``priority`` and ``dst_addr``, and ``uint64_t`` for ``dst_name``.
.. code-block:: C
@@ -305,12 +305,12 @@
Distinction has to be made between using the claimed address and doing an
address claim. To use an already claimed address, one has to fill in the
-j1939.name member and provide it to bind(2). If the name had claimed an address
+``j1939.name`` member and provide it to ``bind(2)``. If the name had claimed an address
earlier, all further messages being sent will use that address. And the
-j1939.addr member will be ignored.
+``j1939.addr`` member will be ignored.
An exception on this is PGN 0x0ee00. This is the "Address Claim/Cannot Claim
-Address" message and the kernel will use the j1939.addr member for that PGN if
+Address" message and the kernel will use the ``j1939.addr`` member for that PGN if
necessary.
To claim an address following code example can be used:
@@ -371,12 +371,12 @@
If another ECU claims the address, the kernel will mark the NAME-SA expired.
No socket bound to the NAME can send packets (other than address claims). To
-claim another address, some socket bound to NAME, must bind(2) again, but with
-only j1939.addr changed to the new SA, and must then send a valid address claim
+claim another address, some socket bound to NAME, must ``bind(2)`` again, but with
+only ``j1939.addr`` changed to the new SA, and must then send a valid address claim
packet. This restarts the state machine in the kernel (and any other
participant on the bus) for this NAME.
-can-utils also include the jacd tool, so it can be used as code example or as
+``can-utils`` also include the ``j1939acd`` tool, so it can be used as code example or as
default Address Claiming daemon.
Send Examples
@@ -403,8 +403,8 @@
bind(sock, (struct sockaddr *)&baddr, sizeof(baddr));
-Now, the socket 'sock' is bound to the SA 0x20. Since no connect(2) was called,
-at this point we can use only sendto(2) or sendmsg(2).
+Now, the socket 'sock' is bound to the SA 0x20. Since no ``connect(2)`` was called,
+at this point we can use only ``sendto(2)`` or ``sendmsg(2)``.
Send:
@@ -414,8 +414,8 @@
.can_family = AF_CAN,
.can_addr.j1939 = {
.name = J1939_NO_NAME;
- .pgn = 0x30,
- .addr = 0x12300,
+ .addr = 0x30,
+ .pgn = 0x12300,
},
};
diff --git a/Documentation/networking/netdev-FAQ.rst b/Documentation/networking/netdev-FAQ.rst
index d5c9320..4b9ed58 100644
--- a/Documentation/networking/netdev-FAQ.rst
+++ b/Documentation/networking/netdev-FAQ.rst
@@ -110,7 +110,7 @@
Q: How can I tell whether it got merged?
A: Start by looking at the main patchworks queue for netdev:
- http://patchwork.ozlabs.org/project/netdev/list/
+ https://patchwork.kernel.org/project/netdevbpf/list/
The "State" field will tell you exactly where things are at with your
patch.
@@ -152,7 +152,7 @@
There is a patchworks queue that you can see here:
- http://patchwork.ozlabs.org/bundle/davem/stable/?state=*
+ https://patchwork.kernel.org/bundle/netdev/stable/?state=*
It contains the patches which Dave has selected, but not yet handed off
to Greg. If Greg already has the patch, then it will be here:
@@ -254,6 +254,32 @@
minimum, your changes should survive an ``allyesconfig`` and an
``allmodconfig`` build without new warnings or failures.
+Q: How do I post corresponding changes to user space components?
+----------------------------------------------------------------
+A: User space code exercising kernel features should be posted
+alongside kernel patches. This gives reviewers a chance to see
+how any new interface is used and how well it works.
+
+When user space tools reside in the kernel repo itself all changes
+should generally come as one series. If series becomes too large
+or the user space project is not reviewed on netdev include a link
+to a public repo where user space patches can be seen.
+
+In case user space tooling lives in a separate repository but is
+reviewed on netdev (e.g. patches to `iproute2` tools) kernel and
+user space patches should form separate series (threads) when posted
+to the mailing list, e.g.::
+
+ [PATCH net-next 0/3] net: some feature cover letter
+ └─ [PATCH net-next 1/3] net: some feature prep
+ └─ [PATCH net-next 2/3] net: some feature do it
+ └─ [PATCH net-next 3/3] selftest: net: some feature
+
+ [PATCH iproute2-next] ip: add support for some feature
+
+Posting as one thread is discouraged because it confuses patchwork
+(as of patchwork 2.2.2).
+
Q: Any other tips to help ensure my net/net-next patch gets OK'd?
-----------------------------------------------------------------
A: Attention to detail. Re-read your own work as if you were the
diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index 2561060..b2f7ec7 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -247,8 +247,8 @@
speeds (see below.)
``PHY_INTERFACE_MODE_2500BASEX``
- This defines a variant of 1000BASE-X which is clocked 2.5 times faster,
- than the 802.3 standard giving a fixed bit rate of 3.125Gbaud.
+ This defines a variant of 1000BASE-X which is clocked 2.5 times as fast
+ as the 802.3 standard, giving a fixed bit rate of 3.125Gbaud.
``PHY_INTERFACE_MODE_SGMII``
This is used for Cisco SGMII, which is a modification of 1000BASE-X
diff --git a/Documentation/networking/statistics.rst b/Documentation/networking/statistics.rst
index 8e15bc9..234abed 100644
--- a/Documentation/networking/statistics.rst
+++ b/Documentation/networking/statistics.rst
@@ -175,5 +175,4 @@
translated to netlink attributes when dumped. Drivers must not overwrite
the statistics they don't report with 0.
-.. kernel-doc:: include/linux/ethtool.h
- :identifiers: ethtool_pause_stats
+- ethtool_pause_stats()
diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst
index 06f743b..3973556 100644
--- a/Documentation/process/stable-kernel-rules.rst
+++ b/Documentation/process/stable-kernel-rules.rst
@@ -39,7 +39,7 @@
submission guidelines as described in
:ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>`
after first checking the stable networking queue at
- https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=*&q=&archive=
+ https://patchwork.kernel.org/bundle/netdev/stable/?state=*
to ensure the requested patch is not already queued up.
- Security patches should not be handled (solely) by the -stable review
process but should follow the procedures in
diff --git a/Documentation/sphinx/automarkup.py b/Documentation/sphinx/automarkup.py
index 409dbc4..3e81eba 100644
--- a/Documentation/sphinx/automarkup.py
+++ b/Documentation/sphinx/automarkup.py
@@ -16,28 +16,36 @@
from itertools import chain
#
+# Python 2 lacks re.ASCII...
+#
+try:
+ ascii_p3 = re.ASCII
+except AttributeError:
+ ascii_p3 = 0
+
+#
# Regex nastiness. Of course.
# Try to identify "function()" that's not already marked up some
# other way. Sphinx doesn't like a lot of stuff right after a
# :c:func: block (i.e. ":c:func:`mmap()`s" flakes out), so the last
# bit tries to restrict matches to things that won't create trouble.
#
-RE_function = re.compile(r'\b(([a-zA-Z_]\w+)\(\))', flags=re.ASCII)
+RE_function = re.compile(r'\b(([a-zA-Z_]\w+)\(\))', flags=ascii_p3)
#
# Sphinx 2 uses the same :c:type role for struct, union, enum and typedef
#
RE_generic_type = re.compile(r'\b(struct|union|enum|typedef)\s+([a-zA-Z_]\w+)',
- flags=re.ASCII)
+ flags=ascii_p3)
#
# Sphinx 3 uses a different C role for each one of struct, union, enum and
# typedef
#
-RE_struct = re.compile(r'\b(struct)\s+([a-zA-Z_]\w+)', flags=re.ASCII)
-RE_union = re.compile(r'\b(union)\s+([a-zA-Z_]\w+)', flags=re.ASCII)
-RE_enum = re.compile(r'\b(enum)\s+([a-zA-Z_]\w+)', flags=re.ASCII)
-RE_typedef = re.compile(r'\b(typedef)\s+([a-zA-Z_]\w+)', flags=re.ASCII)
+RE_struct = re.compile(r'\b(struct)\s+([a-zA-Z_]\w+)', flags=ascii_p3)
+RE_union = re.compile(r'\b(union)\s+([a-zA-Z_]\w+)', flags=ascii_p3)
+RE_enum = re.compile(r'\b(enum)\s+([a-zA-Z_]\w+)', flags=ascii_p3)
+RE_typedef = re.compile(r'\b(typedef)\s+([a-zA-Z_]\w+)', flags=ascii_p3)
#
# Detects a reference to a documentation page of the form Documentation/... with
diff --git a/Documentation/translations/it_IT/process/stable-kernel-rules.rst b/Documentation/translations/it_IT/process/stable-kernel-rules.rst
index 4f206ce..283d6254 100644
--- a/Documentation/translations/it_IT/process/stable-kernel-rules.rst
+++ b/Documentation/translations/it_IT/process/stable-kernel-rules.rst
@@ -46,7 +46,7 @@
:ref:`Documentation/translations/it_IT/networking/netdev-FAQ.rst <it_netdev-FAQ>`;
ma solo dopo aver verificato al seguente indirizzo che la patch non sia
già in coda:
- https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=*&q=&archive=
+ https://patchwork.kernel.org/bundle/netdev/stable/?state=*
- Una patch di sicurezza non dovrebbero essere gestite (solamente) dal processo
di revisione -stable, ma dovrebbe seguire le procedure descritte in
:ref:`Documentation/translations/it_IT/admin-guide/security-bugs.rst <it_securitybugs>`.
diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
index 69fc516..acd2cc2 100644
--- a/Documentation/userspace-api/index.rst
+++ b/Documentation/userspace-api/index.rst
@@ -22,6 +22,7 @@
spec_ctrl
accelerators/ocxl
ioctl/index
+ iommu
media/index
.. only:: subproject and html
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index 36d5f1f..e00a66d 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -6367,7 +6367,7 @@
instead get bounced to user space through the KVM_EXIT_X86_RDMSR and
KVM_EXIT_X86_WRMSR exit notifications.
-8.25 KVM_X86_SET_MSR_FILTER
+8.27 KVM_X86_SET_MSR_FILTER
---------------------------
:Architectures: x86
@@ -6381,8 +6381,7 @@
trap and emulate MSRs that are outside of the scope of KVM as well as
limit the attack surface on KVM's MSR emulation code.
-
-8.26 KVM_CAP_ENFORCE_PV_CPUID
+8.28 KVM_CAP_ENFORCE_PV_CPUID
-----------------------------
Architectures: x86
diff --git a/Documentation/virt/kvm/mmu.rst b/Documentation/virt/kvm/mmu.rst
index 1c030db..5bfe28b 100644
--- a/Documentation/virt/kvm/mmu.rst
+++ b/Documentation/virt/kvm/mmu.rst
@@ -455,7 +455,7 @@
number, it will ignore the cached MMIO information and handle the page
fault through the slow path.
-Since only 19 bits are used to store generation-number on mmio spte, all
+Since only 18 bits are used to store generation-number on mmio spte, all
pages are zapped when there is an overflow.
Unfortunately, a single memory access might access kvm_memslots(kvm) multiple
diff --git a/Documentation/xtensa/mmu.rst b/Documentation/xtensa/mmu.rst
index e52a129..450573a 100644
--- a/Documentation/xtensa/mmu.rst
+++ b/Documentation/xtensa/mmu.rst
@@ -82,7 +82,8 @@
+------------------+
| VMALLOC area | VMALLOC_START 0xc0000000 128MB - 64KB
+------------------+ VMALLOC_END
- | Cache aliasing | TLBTEMP_BASE_1 0xc7ff0000 DCACHE_WAY_SIZE
+ +------------------+
+ | Cache aliasing | TLBTEMP_BASE_1 0xc8000000 DCACHE_WAY_SIZE
| remap area 1 |
+------------------+
| Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
@@ -124,7 +125,8 @@
+------------------+
| VMALLOC area | VMALLOC_START 0xa0000000 128MB - 64KB
+------------------+ VMALLOC_END
- | Cache aliasing | TLBTEMP_BASE_1 0xa7ff0000 DCACHE_WAY_SIZE
+ +------------------+
+ | Cache aliasing | TLBTEMP_BASE_1 0xa8000000 DCACHE_WAY_SIZE
| remap area 1 |
+------------------+
| Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
@@ -167,7 +169,8 @@
+------------------+
| VMALLOC area | VMALLOC_START 0x90000000 128MB - 64KB
+------------------+ VMALLOC_END
- | Cache aliasing | TLBTEMP_BASE_1 0x97ff0000 DCACHE_WAY_SIZE
+ +------------------+
+ | Cache aliasing | TLBTEMP_BASE_1 0x98000000 DCACHE_WAY_SIZE
| remap area 1 |
+------------------+
| Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
diff --git a/MAINTAINERS b/MAINTAINERS
index b516bb3..281de21 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -934,7 +934,7 @@
L: amd-gfx@lists.freedesktop.org
S: Supported
T: git git://people.freedesktop.org/~agd5f/linux
-F: drivers/gpu/drm/amd/powerplay/
+F: drivers/gpu/drm/amd/pm/powerplay/
AMD SEATTLE DEVICE TREE SUPPORT
M: Brijesh Singh <brijeshkumar.singh@amd.com>
@@ -978,7 +978,7 @@
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
-F: Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
+F: Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
F: drivers/iio/adc/ad7768-1.c
ANALOG DEVICES INC AD7780 DRIVER
@@ -1279,7 +1279,7 @@
L: netdev@vger.kernel.org
S: Supported
W: https://www.marvell.com/
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
F: Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst
F: drivers/net/ethernet/aquantia/atlantic/
@@ -1486,10 +1486,20 @@
F: drivers/iommu/arm/
F: drivers/iommu/io-pgtable-arm*
+ARM AND ARM64 SoC SUB-ARCHITECTURES (COMMON PARTS)
+M: Arnd Bergmann <arnd@arndb.de>
+M: Olof Johansson <olof@lixom.net>
+M: soc@kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
+F: arch/arm/boot/dts/Makefile
+F: arch/arm64/boot/dts/Makefile
+
ARM SUB-ARCHITECTURES
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
F: arch/arm/mach-*/
F: arch/arm/plat-*/
@@ -1546,6 +1556,7 @@
ARM/Allwinner sunXi SoC support
M: Maxime Ripard <mripard@kernel.org>
M: Chen-Yu Tsai <wens@csie.org>
+R: Jernej Skrabec <jernej.skrabec@siol.net>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
@@ -1723,11 +1734,13 @@
ARM/CORESIGHT FRAMEWORK AND DRIVERS
M: Mathieu Poirier <mathieu.poirier@linaro.org>
-R: Suzuki K Poulose <suzuki.poulose@arm.com>
+M: Suzuki K Poulose <suzuki.poulose@arm.com>
R: Mike Leach <mike.leach@linaro.org>
+R: Leo Yan <leo.yan@linaro.org>
L: coresight@lists.linaro.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux.git
F: Documentation/ABI/testing/sysfs-bus-coresight-devices-*
F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
F: Documentation/devicetree/bindings/arm/coresight-cti.yaml
@@ -1994,7 +2007,6 @@
ARM/LPC32XX SOC SUPPORT
M: Vladimir Zapolskiy <vz@mleia.com>
-M: Sylvain Lemieux <slemieux.tyco@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://github.com/vzapolskiy/linux-lpc32xx.git
@@ -2012,7 +2024,6 @@
S: Maintained
ARM/Marvell Dove/MV78xx0/Orion SOC support
-M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
M: Gregory Clement <gregory.clement@bootlin.com>
@@ -2029,7 +2040,6 @@
F: drivers/soc/dove/
ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SOC support
-M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Gregory Clement <gregory.clement@bootlin.com>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
@@ -2374,7 +2384,7 @@
F: sound/soc/rockchip/
N: rockchip
-ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
+ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES
M: Krzysztof Kozlowski <krzk@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
@@ -2403,15 +2413,7 @@
N: s3c64xx
N: s5pv210
-ARM/SAMSUNG MOBILE MACHINE SUPPORT
-M: Kyungmin Park <kyungmin.park@samsung.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-s5pv210/
-
ARM/SAMSUNG S5P SERIES 2D GRAPHICS ACCELERATION (G2D) SUPPORT
-M: Kyungmin Park <kyungmin.park@samsung.com>
-M: Kamil Debski <kamil@wypas.org>
M: Andrzej Hajda <a.hajda@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
@@ -2436,9 +2438,6 @@
F: drivers/media/platform/s5p-jpeg/
ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
-M: Kyungmin Park <kyungmin.park@samsung.com>
-M: Kamil Debski <kamil@wypas.org>
-M: Jeongtae Park <jtp.park@samsung.com>
M: Andrzej Hajda <a.hajda@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
@@ -3243,12 +3242,12 @@
BPF (Safe dynamic programs and tools)
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
+M: Andrii Nakryiko <andrii@kernel.org>
R: Martin KaFai Lau <kafai@fb.com>
R: Song Liu <songliubraving@fb.com>
R: Yonghong Song <yhs@fb.com>
-R: Andrii Nakryiko <andrii@kernel.org>
R: John Fastabend <john.fastabend@gmail.com>
-R: KP Singh <kpsingh@chromium.org>
+R: KP Singh <kpsingh@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
@@ -3366,6 +3365,17 @@
F: arch/x86/net/
X: arch/x86/net/bpf_jit_comp32.c
+BPF LSM (Security Audit and Enforcement using BPF)
+M: KP Singh <kpsingh@kernel.org>
+R: Florent Revest <revest@chromium.org>
+R: Brendan Jackman <jackmanb@chromium.org>
+L: bpf@vger.kernel.org
+S: Maintained
+F: Documentation/bpf/bpf_lsm.rst
+F: include/linux/bpf_lsm.h
+F: kernel/bpf/bpf_lsm.c
+F: security/bpf/
+
BROADCOM B44 10/100 ETHERNET DRIVER
M: Michael Chan <michael.chan@broadcom.com>
L: netdev@vger.kernel.org
@@ -3538,11 +3548,12 @@
M: Arend van Spriel <arend.vanspriel@broadcom.com>
M: Franky Lin <franky.lin@broadcom.com>
M: Hante Meuleman <hante.meuleman@broadcom.com>
-M: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-M: Wright Feng <wright.feng@cypress.com>
+M: Chi-hsien Lin <chi-hsien.lin@infineon.com>
+M: Wright Feng <wright.feng@infineon.com>
+M: Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
L: linux-wireless@vger.kernel.org
L: brcm80211-dev-list.pdl@broadcom.com
-L: brcm80211-dev-list@cypress.com
+L: SHA-cyfmac-dev-list@infineon.com
S: Supported
F: drivers/net/wireless/broadcom/brcm80211/
@@ -3857,7 +3868,7 @@
L: linux-usb@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
-F: Documentation/devicetree/bindings/usb/cdns-usb3.txt
+F: Documentation/devicetree/bindings/usb/cdns,usb3.yaml
F: drivers/usb/cdns3/
CADET FM/AM RADIO RECEIVER DRIVER
@@ -4284,6 +4295,7 @@
C: irc://chat.freenode.net/clangbuiltlinux
F: Documentation/kbuild/llvm.rst
F: scripts/clang-tools/
+F: scripts/lld-version.sh
K: \b(?i:clang|llvm)\b
CLEANCACHE API
@@ -4710,7 +4722,7 @@
F: drivers/media/dvb-frontends/cxd2820r*
CXGB3 ETHERNET DRIVER (CXGB3)
-M: Vishal Kulkarni <vishal@chelsio.com>
+M: Raju Rangoju <rajur@chelsio.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.chelsio.com
@@ -4742,7 +4754,7 @@
F: drivers/net/ethernet/chelsio/inline_crypto/
CXGB4 ETHERNET DRIVER (CXGB4)
-M: Vishal Kulkarni <vishal@chelsio.com>
+M: Raju Rangoju <rajur@chelsio.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.chelsio.com
@@ -4764,7 +4776,7 @@
F: include/uapi/rdma/cxgb4-abi.h
CXGB4VF ETHERNET DRIVER (CXGB4VF)
-M: Vishal Kulkarni <vishal@gmail.com>
+M: Raju Rangoju <rajur@chelsio.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.chelsio.com
@@ -6614,6 +6626,7 @@
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4.git
F: Documentation/filesystems/ext4/
F: fs/ext4/
+F: include/trace/events/ext4.h
Extended Verification Module (EVM)
M: Mimi Zohar <zohar@linux.ibm.com>
@@ -7916,7 +7929,7 @@
M: john.garry@huawei.com
S: Maintained
W: http://www.hisilicon.com
-F: Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
+F: Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
F: drivers/bus/hisi_lpc.c
HISILICON NETWORK SUBSYSTEM 3 DRIVER (HNS3)
@@ -8829,8 +8842,8 @@
W: http://www.intel.com/support/feedback.htm
W: http://e1000.sourceforge.net/
Q: http://patchwork.ozlabs.org/project/intel-wired-lan/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue.git
F: Documentation/networking/device_drivers/ethernet/intel/
F: drivers/net/ethernet/intel/
F: drivers/net/ethernet/intel/*/
@@ -9076,10 +9089,7 @@
F: drivers/net/wireless/intel/iwlegacy/
INTEL WIRELESS WIFI LINK (iwlwifi)
-M: Johannes Berg <johannes.berg@intel.com>
-M: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
M: Luca Coelho <luciano.coelho@intel.com>
-M: Intel Linux Wireless <linuxwifi@intel.com>
L: linux-wireless@vger.kernel.org
S: Supported
W: https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi
@@ -9171,6 +9181,7 @@
IOMMU DRIVERS
M: Joerg Roedel <joro@8bytes.org>
+M: Will Deacon <will@kernel.org>
L: iommu@lists.linux-foundation.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
@@ -9254,7 +9265,6 @@
IRQCHIP DRIVERS
M: Thomas Gleixner <tglx@linutronix.de>
-M: Jason Cooper <jason@lakedaemon.net>
M: Marc Zyngier <maz@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -9654,6 +9664,7 @@
F: arch/s390/include/asm/gmap.h
F: arch/s390/include/asm/kvm*
F: arch/s390/include/uapi/asm/kvm*
+F: arch/s390/kernel/uv.c
F: arch/s390/kvm/
F: arch/s390/mm/gmap.c
F: tools/testing/selftests/kvm/*/s390x/
@@ -9842,13 +9853,6 @@
F: arch/mips/lantiq
F: drivers/soc/lantiq
-LAPB module
-L: linux-x25@vger.kernel.org
-S: Orphan
-F: Documentation/networking/lapb-module.rst
-F: include/*/lapb.h
-F: net/lapb/
-
LASI 53c700 driver for PARISC
M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
@@ -10559,6 +10563,13 @@
F: Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
F: drivers/net/ethernet/marvell/octeontx2/af/
+MARVELL PRESTERA ETHERNET SWITCH DRIVER
+M: Vadym Kochan <vkochan@marvell.com>
+M: Taras Chornyi <tchornyi@marvell.com>
+S: Supported
+W: https://github.com/Marvell-switching/switchdev-prestera
+F: drivers/net/ethernet/marvell/prestera/
+
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
S: Odd Fixes
@@ -11163,7 +11174,7 @@
F: drivers/input/touchscreen/melfas_mip4.c
MELLANOX BLUEFIELD I2C DRIVER
-M: Khalil Blaiech <kblaiech@mellanox.com>
+M: Khalil Blaiech <kblaiech@nvidia.com>
L: linux-i2c@vger.kernel.org
S: Supported
F: drivers/i2c/busses/i2c-mlxbf.c
@@ -11173,7 +11184,7 @@
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
F: drivers/net/ethernet/mellanox/mlx4/en_*
MELLANOX ETHERNET DRIVER (mlx5e)
@@ -11181,7 +11192,7 @@
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
F: drivers/net/ethernet/mellanox/mlx5/core/en_*
MELLANOX ETHERNET INNOVA DRIVERS
@@ -11189,7 +11200,7 @@
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
F: drivers/net/ethernet/mellanox/mlx5/core/accel/*
F: drivers/net/ethernet/mellanox/mlx5/core/en_accel/*
F: drivers/net/ethernet/mellanox/mlx5/core/fpga/*
@@ -11201,7 +11212,7 @@
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
F: drivers/net/ethernet/mellanox/mlxsw/
F: tools/testing/selftests/drivers/net/mlxsw/
@@ -11210,7 +11221,7 @@
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
F: drivers/net/ethernet/mellanox/mlxfw/
MELLANOX HARDWARE PLATFORM SUPPORT
@@ -11229,7 +11240,7 @@
L: linux-rdma@vger.kernel.org
S: Supported
W: http://www.mellanox.com
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
F: drivers/net/ethernet/mellanox/mlx4/
F: include/linux/mlx4/
@@ -11250,7 +11261,7 @@
L: linux-rdma@vger.kernel.org
S: Supported
W: http://www.mellanox.com
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
F: Documentation/networking/device_drivers/ethernet/mellanox/
F: drivers/net/ethernet/mellanox/mlx5/core/
F: include/linux/mlx5/
@@ -12130,7 +12141,7 @@
L: netdev@vger.kernel.org
S: Maintained
W: http://www.linuxfoundation.org/en/Net
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
F: Documentation/devicetree/bindings/net/
@@ -12175,7 +12186,7 @@
L: netdev@vger.kernel.org
S: Maintained
W: http://www.linuxfoundation.org/en/Net
-Q: http://patchwork.ozlabs.org/project/netdev/list/
+Q: https://patchwork.kernel.org/project/netdevbpf/list/
B: mailto:netdev@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
@@ -13176,7 +13187,9 @@
M: Ilias Apalodimas <ilias.apalodimas@linaro.org>
L: netdev@vger.kernel.org
S: Supported
+F: Documentation/networking/page_pool.rst
F: include/net/page_pool.h
+F: include/trace/events/page_pool.h
F: net/core/page_pool.c
PANASONIC LAPTOP ACPI EXTRAS DRIVER
@@ -13404,7 +13417,6 @@
PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
M: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-M: Jason Cooper <jason@lakedaemon.net>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -14210,7 +14222,6 @@
F: include/trace/events/pwc.h
PWM FAN DRIVER
-M: Kamil Debski <kamil@wypas.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-hwmon@vger.kernel.org
S: Supported
@@ -14527,6 +14538,14 @@
F: drivers/mailbox/qcom-ipcc.c
F: include/dt-bindings/mailbox/qcom-ipcc.h
+QUALCOMM IPQ4019 VQMMC REGULATOR DRIVER
+M: Robert Marko <robert.marko@sartura.hr>
+M: Luka Perkov <luka.perkov@sartura.hr>
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
+F: drivers/regulator/vqmmc-ipq4019-regulator.c
+
QUALCOMM RMNET DRIVER
M: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
M: Sean Tranchetti <stranche@codeaurora.org>
@@ -14811,7 +14830,7 @@
F: drivers/net/wireless/realtek/rtlwifi/
REALTEK WIRELESS DRIVER (rtw88)
-M: Yan-Hsuan Chuang <yhchuang@realtek.com>
+M: Yan-Hsuan Chuang <tony0620emma@gmail.com>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/realtek/rtw88/
@@ -14882,7 +14901,6 @@
R: Sergei Shtylyov <sergei.shtylyov@gmail.com>
L: netdev@vger.kernel.org
L: linux-renesas-soc@vger.kernel.org
-F: Documentation/devicetree/bindings/net/renesas,*.txt
F: Documentation/devicetree/bindings/net/renesas,*.yaml
F: drivers/net/ethernet/renesas/
F: include/linux/sh_eth.h
@@ -15239,7 +15257,6 @@
S390 IUCV NETWORK LAYER
M: Julian Wiedmann <jwi@linux.ibm.com>
M: Karsten Graul <kgraul@linux.ibm.com>
-M: Ursula Braun <ubraun@linux.ibm.com>
L: linux-s390@vger.kernel.org
S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
@@ -15250,7 +15267,6 @@
S390 NETWORK DRIVERS
M: Julian Wiedmann <jwi@linux.ibm.com>
M: Karsten Graul <kgraul@linux.ibm.com>
-M: Ursula Braun <ubraun@linux.ibm.com>
L: linux-s390@vger.kernel.org
S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
@@ -15419,14 +15435,12 @@
F: drivers/nfc/s3fwrn5
SAMSUNG S5C73M3 CAMERA DRIVER
-M: Kyungmin Park <kyungmin.park@samsung.com>
M: Andrzej Hajda <a.hajda@samsung.com>
L: linux-media@vger.kernel.org
S: Supported
F: drivers/media/i2c/s5c73m3/*
SAMSUNG S5K5BAF CAMERA DRIVER
-M: Kyungmin Park <kyungmin.park@samsung.com>
M: Andrzej Hajda <a.hajda@samsung.com>
L: linux-media@vger.kernel.org
S: Supported
@@ -15444,7 +15458,6 @@
F: drivers/crypto/s5p-sss.c
SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
-M: Kyungmin Park <kyungmin.park@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-media@vger.kernel.org
S: Supported
@@ -15492,7 +15505,6 @@
F: drivers/thermal/samsung/
SAMSUNG USB2 PHY DRIVER
-M: Kamil Debski <kamil@wypas.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-kernel@vger.kernel.org
S: Supported
@@ -15791,9 +15803,8 @@
F: include/linux/slimbus.h
SFC NETWORK DRIVER
-M: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
-M: Edward Cree <ecree@solarflare.com>
-M: Martin Habets <mhabets@solarflare.com>
+M: Edward Cree <ecree.xilinx@gmail.com>
+M: Martin Habets <habetsm.xilinx@gmail.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/sfc/
@@ -15821,7 +15832,6 @@
F: drivers/misc/sgi-xp/
SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
-M: Ursula Braun <ubraun@linux.ibm.com>
M: Karsten Graul <kgraul@linux.ibm.com>
L: linux-s390@vger.kernel.org
S: Supported
@@ -18083,7 +18093,7 @@
M: Binghui Wang <wangbinghui@hisilicon.com>
L: linux-usb@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
+F: Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
F: drivers/phy/hisilicon/phy-hi3660-usb3.c
USB ISP116X DRIVER
@@ -18168,6 +18178,14 @@
S: Supported
F: drivers/usb/class/usblp.c
+USB RAW GADGET DRIVER
+R: Andrey Konovalov <andreyknvl@gmail.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: Documentation/usb/raw-gadget.rst
+F: drivers/usb/gadget/legacy/raw_gadget.c
+F: include/uapi/linux/usb/raw_gadget.h
+
USB QMI WWAN NETWORK DRIVER
M: Bjørn Mork <bjorn@mork.no>
L: netdev@vger.kernel.org
@@ -18993,12 +19011,18 @@
S: Maintained
N: axp[128]
-X.25 NETWORK LAYER
-M: Andrew Hendry <andrew.hendry@gmail.com>
+X.25 STACK
+M: Martin Schiller <ms@dev.tdt.de>
L: linux-x25@vger.kernel.org
-S: Odd Fixes
+S: Maintained
+F: Documentation/networking/lapb-module.rst
F: Documentation/networking/x25*
+F: drivers/net/wan/hdlc_x25.c
+F: drivers/net/wan/lapbether.c
+F: include/*/lapb.h
F: include/net/x25*
+F: include/uapi/linux/x25.h
+F: net/lapb/
F: net/x25/
X86 ARCHITECTURE (32-BIT AND 64-BIT)
@@ -19112,12 +19136,17 @@
L: bpf@vger.kernel.org
S: Supported
F: include/net/xdp.h
+F: include/net/xdp_priv.h
F: include/trace/events/xdp.h
F: kernel/bpf/cpumap.c
F: kernel/bpf/devmap.c
F: net/core/xdp.c
-N: xdp
-K: xdp
+F: samples/bpf/xdp*
+F: tools/testing/selftests/bpf/*xdp*
+F: tools/testing/selftests/bpf/*/*xdp*
+F: drivers/net/ethernet/*/*/*/*/*xdp*
+F: drivers/net/ethernet/*/*/*xdp*
+K: (?:\b|_)xdp(?:\b|_)
XDP SOCKETS (AF_XDP)
M: Björn Töpel <bjorn.topel@intel.com>
@@ -19126,9 +19155,12 @@
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
+F: Documentation/networking/af_xdp.rst
F: include/net/xdp_sock*
F: include/net/xsk_buff_pool.h
F: include/uapi/linux/if_xdp.h
+F: include/uapi/linux/xdp_diag.h
+F: include/net/netns/xdp.h
F: net/xdp/
F: samples/bpf/xdpsock*
F: tools/lib/bpf/xsk*
diff --git a/Makefile b/Makefile
index 9e7fd6a..9ec53d9 100644
--- a/Makefile
+++ b/Makefile
@@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 10
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc7
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*
@@ -433,7 +433,6 @@
OBJCOPY = llvm-objcopy
OBJDUMP = llvm-objdump
READELF = llvm-readelf
-OBJSIZE = llvm-size
STRIP = llvm-strip
else
CC = $(CROSS_COMPILE)gcc
@@ -443,7 +442,6 @@
OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
READELF = $(CROSS_COMPILE)readelf
-OBJSIZE = $(CROSS_COMPILE)size
STRIP = $(CROSS_COMPILE)strip
endif
PAHOLE = pahole
@@ -509,7 +507,7 @@
CLANG_FLAGS :=
export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
+export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
@@ -828,7 +826,9 @@
DEBUG_CFLAGS += -g
endif
+ifneq ($(LLVM_IAS),1)
KBUILD_AFLAGS += -Wa,-gdwarf-2
+endif
ifdef CONFIG_DEBUG_INFO_DWARF4
DEBUG_CFLAGS += -gdwarf-4
@@ -946,7 +946,7 @@
KBUILD_CFLAGS += $(call cc-option,-Werror=designated-init)
# change __FILE__ to the relative path from the srctree
-KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
+KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
# ensure -fcf-protection is disabled when using retpoline as it is
# incompatible with -mindirect-branch=thunk-extern
@@ -984,6 +984,12 @@
LDFLAGS_vmlinux += --pack-dyn-relocs=relr
endif
+# We never want expected sections to be placed heuristically by the
+# linker. All sections should be explicitly named in the linker script.
+ifdef CONFIG_LD_ORPHAN_WARN
+LDFLAGS_vmlinux += --orphan-handling=warn
+endif
+
# Align the bit size of userspace programs with the kernel
KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
diff --git a/arch/Kconfig b/arch/Kconfig
index 56b6ccc..ba4e966 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -1028,6 +1028,15 @@
bool
depends on HAVE_STATIC_CALL
+config ARCH_WANT_LD_ORPHAN_WARN
+ bool
+ help
+ An arch should select this symbol once all linker sections are explicitly
+ included, size-asserted, or discarded in the linker scripts. This is
+ important because we never want expected sections to be placed heuristically
+ by the linker, since the locations of such sections can change between linker
+ versions.
+
source "kernel/gcov/Kconfig"
source "scripts/gcc-plugins/Kconfig"
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 7462a79..4c7b041 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -57,7 +57,7 @@
void arch_cpu_idle(void)
{
wtint(0);
- local_irq_enable();
+ raw_local_irq_enable();
}
void arch_cpu_idle_dead(void)
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index c6606f4..fb98440 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -243,10 +243,8 @@
x <<= 2;
r -= 2;
}
- if (!(x & 0x80000000u)) {
- x <<= 1;
+ if (!(x & 0x80000000u))
r -= 1;
- }
return r;
}
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index f1ed17e..1636417 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -134,8 +134,10 @@
#ifdef CONFIG_ARC_HAS_PAE40
#define PTE_BITS_NON_RWX_IN_PD1 (0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
#else
#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
#endif
/**************************************************************************
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index 17fd1ed..9152782 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -67,7 +67,22 @@
sr r5, [ARC_REG_LPB_CTRL]
1:
#endif /* CONFIG_ARC_LPB_DISABLE */
-#endif
+
+ /* On HSDK, CCMs need to remapped super early */
+#ifdef CONFIG_ARC_SOC_HSDK
+ mov r6, 0x60000000
+ lr r5, [ARC_REG_ICCM_BUILD]
+ breq r5, 0, 1f
+ sr r6, [ARC_REG_AUX_ICCM]
+1:
+ lr r5, [ARC_REG_DCCM_BUILD]
+ breq r5, 0, 2f
+ sr r6, [ARC_REG_AUX_DCCM]
+2:
+#endif /* CONFIG_ARC_SOC_HSDK */
+
+#endif /* CONFIG_ISA_ARCV2 */
+
; Config DSP_CTRL properly, so kernel may use integer multiply,
; multiply-accumulate, and divide operations
DSP_EARLY_INIT
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index feba91c..f73da20 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -38,15 +38,27 @@
#ifdef CONFIG_ARC_DW2_UNWIND
-static void seed_unwind_frame_info(struct task_struct *tsk,
- struct pt_regs *regs,
- struct unwind_frame_info *frame_info)
+static int
+seed_unwind_frame_info(struct task_struct *tsk, struct pt_regs *regs,
+ struct unwind_frame_info *frame_info)
{
- /*
- * synchronous unwinding (e.g. dump_stack)
- * - uses current values of SP and friends
- */
- if (tsk == NULL && regs == NULL) {
+ if (regs) {
+ /*
+ * Asynchronous unwinding of intr/exception
+ * - Just uses the pt_regs passed
+ */
+ frame_info->task = tsk;
+
+ frame_info->regs.r27 = regs->fp;
+ frame_info->regs.r28 = regs->sp;
+ frame_info->regs.r31 = regs->blink;
+ frame_info->regs.r63 = regs->ret;
+ frame_info->call_frame = 0;
+ } else if (tsk == NULL || tsk == current) {
+ /*
+ * synchronous unwinding (e.g. dump_stack)
+ * - uses current values of SP and friends
+ */
unsigned long fp, sp, blink, ret;
frame_info->task = current;
@@ -63,13 +75,17 @@
frame_info->regs.r31 = blink;
frame_info->regs.r63 = ret;
frame_info->call_frame = 0;
- } else if (regs == NULL) {
+ } else {
/*
- * Asynchronous unwinding of sleeping task
- * - Gets SP etc from task's pt_regs (saved bottom of kernel
- * mode stack of task)
+ * Asynchronous unwinding of a likely sleeping task
+ * - first ensure it is actually sleeping
+ * - if so, it will be in __switch_to, kernel mode SP of task
+ * is safe-kept and BLINK at a well known location in there
*/
+ if (tsk->state == TASK_RUNNING)
+ return -1;
+
frame_info->task = tsk;
frame_info->regs.r27 = TSK_K_FP(tsk);
@@ -90,19 +106,8 @@
frame_info->regs.r28 += 60;
frame_info->call_frame = 0;
- } else {
- /*
- * Asynchronous unwinding of intr/exception
- * - Just uses the pt_regs passed
- */
- frame_info->task = tsk;
-
- frame_info->regs.r27 = regs->fp;
- frame_info->regs.r28 = regs->sp;
- frame_info->regs.r31 = regs->blink;
- frame_info->regs.r63 = regs->ret;
- frame_info->call_frame = 0;
}
+ return 0;
}
#endif
@@ -112,11 +117,12 @@
int (*consumer_fn) (unsigned int, void *), void *arg)
{
#ifdef CONFIG_ARC_DW2_UNWIND
- int ret = 0;
+ int ret = 0, cnt = 0;
unsigned int address;
struct unwind_frame_info frame_info;
- seed_unwind_frame_info(tsk, regs, &frame_info);
+ if (seed_unwind_frame_info(tsk, regs, &frame_info))
+ return 0;
while (1) {
address = UNW_PC(&frame_info);
@@ -132,6 +138,11 @@
break;
frame_info.regs.r63 = frame_info.regs.r31;
+
+ if (cnt++ > 128) {
+ printk("unwinder looping too long, aborting !\n");
+ return 0;
+ }
}
return address; /* return the last address it saw */
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index c340acd..9bb3c24 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -30,14 +30,14 @@
* -Changes related to MMU v2 (Rel 4.8)
*
* Vineetg: Aug 29th 2008
- * -In TLB Flush operations (Metal Fix MMU) there is a explict command to
+ * -In TLB Flush operations (Metal Fix MMU) there is a explicit command to
* flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd,
* it fails. Thus need to load it with ANY valid value before invoking
* TLBIVUTLB cmd
*
* Vineetg: Aug 21th 2008:
* -Reduced the duration of IRQ lockouts in TLB Flush routines
- * -Multiple copies of TLB erase code seperated into a "single" function
+ * -Multiple copies of TLB erase code separated into a "single" function
* -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID
* in interrupt-safe region.
*
@@ -66,7 +66,7 @@
*
* Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has
* much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways.
- * Given this, the thrasing problem should never happen because once the 3
+ * Given this, the thrashing problem should never happen because once the 3
* J-TLB entries are created (even though 3rd will knock out one of the prev
* two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy
*
@@ -127,7 +127,7 @@
* There was however an obscure hardware bug, where uTLB flush would
* fail when a prior probe for J-TLB (both totally unrelated) would
* return lkup err - because the entry didn't exist in MMU.
- * The Workround was to set Index reg with some valid value, prior to
+ * The Workaround was to set Index reg with some valid value, prior to
* flush. This was fixed in MMU v3
*/
unsigned int idx;
@@ -272,7 +272,7 @@
}
/*
- * Flush the entrie MM for userland. The fastest way is to move to Next ASID
+ * Flush the entire MM for userland. The fastest way is to move to Next ASID
*/
noinline void local_flush_tlb_mm(struct mm_struct *mm)
{
@@ -303,7 +303,7 @@
* Difference between this and Kernel Range Flush is
* -Here the fastest way (if range is too large) is to move to next ASID
* without doing any explicit Shootdown
- * -In case of kernel Flush, entry has to be shot down explictly
+ * -In case of kernel Flush, entry has to be shot down explicitly
*/
void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end)
@@ -620,7 +620,7 @@
* Super Page size is configurable in hardware (4K to 16M), but fixed once
* RTL builds.
*
- * The exact THP size a Linx configuration will support is a function of:
+ * The exact THP size a Linux configuration will support is a function of:
* - MMU page size (typical 8K, RTL fixed)
* - software page walker address split between PGD:PTE:PFN (typical
* 11:8:13, but can be changed with 1 line)
@@ -698,7 +698,7 @@
#endif
-/* Read the Cache Build Confuration Registers, Decode them and save into
+/* Read the Cache Build Configuration Registers, Decode them and save into
* the cpuinfo structure for later use.
* No Validation is done here, simply read/convert the BCRs
*/
@@ -803,13 +803,13 @@
pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str)));
/*
- * Can't be done in processor.h due to header include depenedencies
+ * Can't be done in processor.h due to header include dependencies
*/
BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_KVADDR_SIZE << 20), PMD_SIZE));
/*
* stack top size sanity check,
- * Can't be done in processor.h due to header include depenedencies
+ * Can't be done in processor.h due to header include dependencies
*/
BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));
@@ -881,7 +881,7 @@
* the duplicate one.
* -Knob to be verbose abt it.(TODO: hook them up to debugfs)
*/
-volatile int dup_pd_silent; /* Be slient abt it or complain (default) */
+volatile int dup_pd_silent; /* Be silent abt it or complain (default) */
void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
struct pt_regs *regs)
@@ -948,7 +948,7 @@
/***********************************************************************
* Diagnostic Routines
- * -Called from Low Level TLB Hanlders if things don;t look good
+ * -Called from Low Level TLB Handlers if things don;t look good
**********************************************************************/
#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
index 0b63fc0..b3ea1fa 100644
--- a/arch/arc/plat-hsdk/platform.c
+++ b/arch/arc/plat-hsdk/platform.c
@@ -17,22 +17,6 @@
#define ARC_CCM_UNUSED_ADDR 0x60000000
-static void __init hsdk_init_per_cpu(unsigned int cpu)
-{
- /*
- * By default ICCM is mapped to 0x7z while this area is used for
- * kernel virtual mappings, so move it to currently unused area.
- */
- if (cpuinfo_arc700[cpu].iccm.sz)
- write_aux_reg(ARC_REG_AUX_ICCM, ARC_CCM_UNUSED_ADDR);
-
- /*
- * By default DCCM is mapped to 0x8z while this area is used by kernel,
- * so move it to currently unused area.
- */
- if (cpuinfo_arc700[cpu].dccm.sz)
- write_aux_reg(ARC_REG_AUX_DCCM, ARC_CCM_UNUSED_ADDR);
-}
#define ARC_PERIPHERAL_BASE 0xf0000000
#define CREG_BASE (ARC_PERIPHERAL_BASE + 0x1000)
@@ -339,5 +323,4 @@
MACHINE_START(SIMULATION, "hsdk")
.dt_compat = hsdk_compat,
.init_early = hsdk_init_early,
- .init_per_cpu = hsdk_init_per_cpu,
MACHINE_END
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fe2f17eb2..002e0cf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -35,6 +35,7 @@
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
select ARCH_WANT_IPC_PARSE_VERSION
+ select ARCH_WANT_LD_ORPHAN_WARN
select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
select BUILDTIME_TABLE_SORT if MMU
select CLONE_BACKWARDS
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4d76eab..e15f76c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -16,10 +16,6 @@
KBUILD_LDFLAGS_MODULE += --be8
endif
-# We never want expected sections to be placed heuristically by the
-# linker. All sections should be explicitly named in the linker script.
-LDFLAGS_vmlinux += $(call ld-option, --orphan-handling=warn)
-
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 47f001c..e156741 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -129,7 +129,9 @@
# Delete all temporary local symbols
LDFLAGS_vmlinux += -X
# Report orphan sections
-LDFLAGS_vmlinux += $(call ld-option, --orphan-handling=warn)
+ifdef CONFIG_LD_ORPHAN_WARN
+LDFLAGS_vmlinux += --orphan-handling=warn
+endif
# Next argument is a linker script
LDFLAGS_vmlinux += -T
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 2e04ec5..caa2732 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1472,6 +1472,9 @@
@ issued from HYP mode take us to the correct handler code. We
@ will disable the MMU before jumping to the kernel proper.
@
+ ARM( bic r1, r1, #(1 << 30) ) @ clear HSCTLR.TE
+ THUMB( orr r1, r1, #(1 << 30) ) @ set HSCTLR.TE
+ mcr p15, 4, r1, c1, c0, 0
adr r0, __hyp_reentry_vectors
mcr p15, 4, r0, c12, c0, 0 @ set HYP vector base (HVBAR)
isb
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index c220dc3..243e35f 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -521,7 +521,7 @@
ranges = <0x0 0x100000 0x8000>;
mac_sw: switch@0 {
- compatible = "ti,am4372-cpsw","ti,cpsw-switch";
+ compatible = "ti,am4372-cpsw-switch", "ti,cpsw-switch";
reg = <0x0 0x4000>;
ranges = <0 0 0x4000>;
clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index b69c7d4..2f32615 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -32,8 +32,8 @@
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
- clocks = <&mcan_clk>, <&l3_iclk_div>;
- clock-names = "cclk", "hclk";
+ clocks = <&l3_iclk_div>, <&mcan_clk>;
+ clock-names = "hclk", "cclk";
bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
};
};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ab291ce..2983e91 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -122,7 +122,6 @@
};
&clock {
- clocks = <&clock CLK_XUSBXTI>;
assigned-clocks = <&clock CLK_FOUT_EPLL>;
assigned-clock-rates = <45158401>;
};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index 878e89c..4ea5c23 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -59,7 +59,7 @@
MX50_PAD_CSPI_MISO__CSPI_MISO 0x00
MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00
MX50_PAD_CSPI_SS0__GPIO4_11 0xc4
- MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0xf4
+ MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84
>;
};
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
index d112b50..b4605ed 100644
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -213,8 +213,8 @@
#size-cells = <0>;
/* Microchip KSZ9031RNX PHY */
- rgmii_phy: ethernet-phy@4 {
- reg = <4>;
+ rgmii_phy: ethernet-phy@0 {
+ reg = <0>;
interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index 265f5f3..24f793c 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -551,7 +551,7 @@
pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 828dd20..d07d8f8 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -98,7 +98,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index 9390979..b9b698f 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -166,7 +166,6 @@
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>;
};
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
index adde62d..342304f 100644
--- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
+++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
@@ -223,8 +223,7 @@
};
&ssp3 {
- /delete-property/ #address-cells;
- /delete-property/ #size-cells;
+ #address-cells = <0>;
spi-slave;
status = "okay";
ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 5dff24e..8456f17 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -46,6 +46,16 @@
linux,code = <KEY_A>;
gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
};
+
+ /*
+ * The EXTi IRQ line 0 is shared with PMIC,
+ * so mark this as polled GPIO key.
+ */
+ button-2 {
+ label = "TA3-GPIO-C";
+ linux,code = <KEY_C>;
+ gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
+ };
};
gpio-keys {
@@ -59,13 +69,6 @@
wakeup-source;
};
- button-2 {
- label = "TA3-GPIO-C";
- linux,code = <KEY_C>;
- gpios = <&gpioi 11 GPIO_ACTIVE_LOW>;
- wakeup-source;
- };
-
button-3 {
label = "TA4-GPIO-D";
linux,code = <KEY_D>;
@@ -79,7 +82,7 @@
led-0 {
label = "green:led5";
- gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index b4b52cf..f796a61 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -68,6 +68,7 @@
gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
regulator-always-on;
regulator-boot-on;
+ vin-supply = <&vdd>;
};
};
@@ -202,6 +203,7 @@
vdda: ldo1 {
regulator-name = "vdda";
+ regulator-always-on;
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
interrupts = <IT_CURLIM_LDO1 0>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 04fbb32..803eb8b 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -21,6 +21,10 @@
};
};
+&dts {
+ status = "okay";
+};
+
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 049e6ab..73de34a 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -154,7 +154,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 32d5d45..8945dbb 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -130,7 +130,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index bb3987e..0b3d9ae 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -132,7 +132,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 8c8dee6..9109ca0 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -151,7 +151,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index fce2f7f..bf38c66 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2015 Adam Sampson <ats@offog.org>
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -115,7 +115,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 9d34eab..431f702 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -131,7 +131,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_sw>;
phy-handle = <&rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
allwinner,rx-delay-ps = <700>;
allwinner,tx-delay-ps = <700>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index d9be511..d8326a5 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -183,7 +183,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_dldo4>;
phy-handle = <&rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
index 71fb732..babf4cf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -53,11 +53,6 @@
};
};
-&emac {
- /* LEDs changed to active high on the plus */
- /delete-property/ allwinner,leds-active-low;
-};
-
&mmc1 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
index 6dbf7b2..b6ca45d 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -67,7 +67,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 2fc62ef..a6a1087 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -129,7 +129,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_dc1sw>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
index 9bab6b7..4aa0ee8 100644
--- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
@@ -10,7 +10,7 @@
/ {
model = "PineCube IP Camera";
- compatible = "pine64,pinecube", "allwinner,sun8i-s3";
+ compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
aliases {
serial0 = &uart2;
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 0c73416..89abd4c 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -539,7 +539,7 @@
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 15c22b0..4795455 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -120,7 +120,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_dc1sw>;
status = "okay";
};
@@ -198,16 +198,16 @@
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index d3b337b..484b93d 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -129,7 +129,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index bbc6335..5c3580d 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -124,7 +124,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index 39263e7..8e5cb3b 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -126,7 +126,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index e500911..6f1e0f0 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -406,6 +406,9 @@
};
};
+&mdio1 {
+ clock-frequency = <5000000>;
+};
&iomuxc {
pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 34793aa..58df9fd 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -81,7 +81,6 @@
CONFIG_BINFMT_MISC=y
CONFIG_CMA=y
CONFIG_ZSMALLOC=m
-CONFIG_ZSMALLOC_PGTABLE_MAPPING=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index 213607a..e26a278 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -44,20 +44,20 @@
unsigned long val, void *data);
/* optinsn template addresses */
-extern __visible kprobe_opcode_t optprobe_template_entry;
-extern __visible kprobe_opcode_t optprobe_template_val;
-extern __visible kprobe_opcode_t optprobe_template_call;
-extern __visible kprobe_opcode_t optprobe_template_end;
-extern __visible kprobe_opcode_t optprobe_template_sub_sp;
-extern __visible kprobe_opcode_t optprobe_template_add_sp;
-extern __visible kprobe_opcode_t optprobe_template_restore_begin;
-extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn;
-extern __visible kprobe_opcode_t optprobe_template_restore_end;
+extern __visible kprobe_opcode_t optprobe_template_entry[];
+extern __visible kprobe_opcode_t optprobe_template_val[];
+extern __visible kprobe_opcode_t optprobe_template_call[];
+extern __visible kprobe_opcode_t optprobe_template_end[];
+extern __visible kprobe_opcode_t optprobe_template_sub_sp[];
+extern __visible kprobe_opcode_t optprobe_template_add_sp[];
+extern __visible kprobe_opcode_t optprobe_template_restore_begin[];
+extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn[];
+extern __visible kprobe_opcode_t optprobe_template_restore_end[];
#define MAX_OPTIMIZED_LENGTH 4
#define MAX_OPTINSN_SIZE \
- ((unsigned long)&optprobe_template_end - \
- (unsigned long)&optprobe_template_entry)
+ ((unsigned long)optprobe_template_end - \
+ (unsigned long)optprobe_template_entry)
#define RELATIVEJUMP_SIZE 4
struct arch_optimized_insn {
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 3502c2f..baf7d02 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -75,6 +75,8 @@
#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t))
#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
+
/*
* PMD_SHIFT determines the size of the area a second-level page table can map
* PGDIR_SHIFT determines what a third-level page table entry can map
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index fbb6693..2b85d17 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -25,6 +25,8 @@
#define PTE_HWTABLE_OFF (0)
#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u64))
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+
/*
* PGDIR_SHIFT determines the size a top-level page table entry can map.
*/
diff --git a/arch/arm/kernel/perf_regs.c b/arch/arm/kernel/perf_regs.c
index 05fe92a..0529f90 100644
--- a/arch/arm/kernel/perf_regs.c
+++ b/arch/arm/kernel/perf_regs.c
@@ -32,8 +32,7 @@
}
void perf_get_regs_user(struct perf_regs *regs_user,
- struct pt_regs *regs,
- struct pt_regs *regs_user_copy)
+ struct pt_regs *regs)
{
regs_user->regs = task_pt_regs(current);
regs_user->abi = perf_reg_abi(current);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 8e6ace0..9f199b1 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -71,7 +71,7 @@
arm_pm_idle();
else
cpu_do_idle();
- local_irq_enable();
+ raw_local_irq_enable();
}
void arch_cpu_idle_prepare(void)
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index d841bed..7bb47eb 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -136,7 +136,7 @@
src_np = of_find_compatible_node(NULL, NULL,
"fsl,imx6ul-src");
- src_base = of_iomap(np, 0);
+ src_base = of_iomap(src_np, 0);
of_node_put(src_np);
WARN_ON(!src_base);
sbmr2 = readl_relaxed(src_base + SRC_SBMR2);
diff --git a/arch/arm/mach-keystone/memory.h b/arch/arm/mach-keystone/memory.h
index 9147565..1b9ed12 100644
--- a/arch/arm/mach-keystone/memory.h
+++ b/arch/arm/mach-keystone/memory.h
@@ -6,9 +6,6 @@
#ifndef __MEMORY_H
#define __MEMORY_H
-#define MAX_PHYSMEM_BITS 36
-#define SECTION_SIZE_BITS 34
-
#define KEYSTONE_LOW_PHYS_START 0x80000000ULL
#define KEYSTONE_LOW_PHYS_SIZE 0x80000000ULL /* 2G */
#define KEYSTONE_LOW_PHYS_END (KEYSTONE_LOW_PHYS_START + \
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 144b9ca..a720259 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -288,7 +288,7 @@
.dev_id = "ohci",
.table = {
/* Power GPIO on the I2C-attached TPS65010 */
- GPIO_LOOKUP("i2c-tps65010", 1, "power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("tps65010", 0, "power", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent",
GPIO_ACTIVE_HIGH),
},
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3ee7bdf..3f62a0c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -7,7 +7,6 @@
depends on ARCH_MULTI_V6
select ARCH_OMAP2PLUS
select CPU_V6
- select PM_GENERIC_DOMAINS if PM
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
@@ -106,6 +105,8 @@
select OMAP_DM_TIMER
select OMAP_GPMC
select PINCTRL
+ select PM_GENERIC_DOMAINS if PM
+ select PM_GENERIC_DOMAINS_OF if PM
select RESET_CONTROLLER
select SOC_BUS
select TI_SYSC
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index a92d277..c8d317f 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -175,8 +175,11 @@
if (mpuss_can_lose_context) {
error = cpu_cluster_pm_enter();
if (error) {
- omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
- goto cpu_cluster_pm_out;
+ index = 0;
+ cx = state_ptr + index;
+ pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
+ omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+ mpuss_can_lose_context = 0;
}
}
}
@@ -184,7 +187,6 @@
omap4_enter_lowpower(dev->cpu, cx->cpu_state);
cpu_done[dev->cpu] = true;
-cpu_cluster_pm_out:
/* Wakeup CPU1 only if it is not offlined */
if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 06da274..1963572 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -66,6 +66,7 @@
"allwinner,sun8i-h2-plus",
"allwinner,sun8i-h3",
"allwinner,sun8i-r40",
+ "allwinner,sun8i-v3",
"allwinner,sun8i-v3s",
NULL,
};
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index d57112a..c23dbf8 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -354,8 +354,8 @@
/* set highmem page free */
for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE,
&range_start, &range_end, NULL) {
- unsigned long start = PHYS_PFN(range_start);
- unsigned long end = PHYS_PFN(range_end);
+ unsigned long start = PFN_UP(range_start);
+ unsigned long end = PFN_DOWN(range_end);
/* Ignore complete lowmem entries */
if (end <= max_low)
diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c
index 7a449df..c78180172 100644
--- a/arch/arm/probes/kprobes/opt-arm.c
+++ b/arch/arm/probes/kprobes/opt-arm.c
@@ -85,21 +85,21 @@
"optprobe_template_end:\n");
#define TMPL_VAL_IDX \
- ((unsigned long *)&optprobe_template_val - (unsigned long *)&optprobe_template_entry)
+ ((unsigned long *)optprobe_template_val - (unsigned long *)optprobe_template_entry)
#define TMPL_CALL_IDX \
- ((unsigned long *)&optprobe_template_call - (unsigned long *)&optprobe_template_entry)
+ ((unsigned long *)optprobe_template_call - (unsigned long *)optprobe_template_entry)
#define TMPL_END_IDX \
- ((unsigned long *)&optprobe_template_end - (unsigned long *)&optprobe_template_entry)
+ ((unsigned long *)optprobe_template_end - (unsigned long *)optprobe_template_entry)
#define TMPL_ADD_SP \
- ((unsigned long *)&optprobe_template_add_sp - (unsigned long *)&optprobe_template_entry)
+ ((unsigned long *)optprobe_template_add_sp - (unsigned long *)optprobe_template_entry)
#define TMPL_SUB_SP \
- ((unsigned long *)&optprobe_template_sub_sp - (unsigned long *)&optprobe_template_entry)
+ ((unsigned long *)optprobe_template_sub_sp - (unsigned long *)optprobe_template_entry)
#define TMPL_RESTORE_BEGIN \
- ((unsigned long *)&optprobe_template_restore_begin - (unsigned long *)&optprobe_template_entry)
+ ((unsigned long *)optprobe_template_restore_begin - (unsigned long *)optprobe_template_entry)
#define TMPL_RESTORE_ORIGN_INSN \
- ((unsigned long *)&optprobe_template_restore_orig_insn - (unsigned long *)&optprobe_template_entry)
+ ((unsigned long *)optprobe_template_restore_orig_insn - (unsigned long *)optprobe_template_entry)
#define TMPL_RESTORE_END \
- ((unsigned long *)&optprobe_template_restore_end - (unsigned long *)&optprobe_template_entry)
+ ((unsigned long *)optprobe_template_restore_end - (unsigned long *)optprobe_template_entry)
/*
* ARM can always optimize an instruction when using ARM ISA, except
@@ -234,7 +234,7 @@
}
/* Copy arch-dep-instance from template. */
- memcpy(code, (unsigned long *)&optprobe_template_entry,
+ memcpy(code, (unsigned long *)optprobe_template_entry,
TMPL_END_IDX * sizeof(kprobe_opcode_t));
/* Adjust buffer according to instruction. */
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1d466ad..a6b5b7e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -81,6 +81,7 @@
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
select ARCH_WANT_FRAME_POINTERS
select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
+ select ARCH_WANT_LD_ORPHAN_WARN
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARM_AMBA
select ARM_ARCH_TIMER
@@ -1002,7 +1003,7 @@
config NODES_SHIFT
int "Maximum NUMA Nodes (as a power of 2)"
range 1 10
- default "2"
+ default "4"
depends on NEED_MULTIPLE_NODES
help
Specify the maximum number of NUMA Nodes available on the target
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 5789c2d..6a87d59 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -28,10 +28,6 @@
endif
endif
-# We never want expected sections to be placed heuristically by the
-# linker. All sections should be explicitly named in the linker script.
-LDFLAGS_vmlinux += $(call ld-option, --orphan-handling=warn)
-
ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS), y)
ifneq ($(CONFIG_ARM64_LSE_ATOMICS), y)
$(warning LSE atomics not supported by binutils)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 3ea5182..e5e840b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -105,7 +105,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_dc1sw>;
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index d894ec5..70e3174 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -120,7 +120,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_gmac_3v3>;
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index b26181c..b54099b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -13,7 +13,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-txid";
phy-handle = <&ext_rgmii_phy>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
index 3ab0f03..0494bfa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -122,9 +122,6 @@
status = "okay";
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
csi_ep: endpoint {
remote-endpoint = <&ov5640_ep>;
bus-width = <8>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 9ebb9e0..d406974 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -79,7 +79,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_dc1sw>;
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
index df1b926..6e30a56 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
@@ -36,7 +36,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
/delete-property/ allwinner,leds-active-low;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 4f9ba53..9d93fe1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -96,7 +96,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 7d7aad1..8bf2db9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -123,7 +123,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index cb44bfa..33ab440 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -124,7 +124,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 3f7ceeb..7c9dbde 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -97,7 +97,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_aldo2>;
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
index fceb298..29a081e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -27,7 +27,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_gmac_3v3>;
allwinner,rx-delay-ps = <200>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index af85b20..961732c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -100,7 +100,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_gmac_3v3>;
allwinner,rx-delay-ps = <200>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index feadd21..46e558a 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -159,7 +159,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q00a";
+ compatible = "micron,mt25qu02g", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index c079667..f9b4a39 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -192,7 +192,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q00a";
+ compatible = "micron,mt25qu02g", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
index 55259f9..aef8f2b 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -5,20 +5,20 @@
usb {
compatible = "simple-bus";
dma-ranges;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x68500000 0x00400000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
usbphy0: usb-phy@0 {
compatible = "brcm,sr-usb-combo-phy";
- reg = <0x00000000 0x100>;
+ reg = <0x0 0x00000000 0x0 0x100>;
#phy-cells = <1>;
status = "disabled";
};
xhci0: usb@1000 {
compatible = "generic-xhci";
- reg = <0x00001000 0x1000>;
+ reg = <0x0 0x00001000 0x0 0x1000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0 1>, <&usbphy0 0>;
phy-names = "phy0", "phy1";
@@ -28,7 +28,7 @@
bdc0: usb@2000 {
compatible = "brcm,bdc-v0.16";
- reg = <0x00002000 0x1000>;
+ reg = <0x0 0x00002000 0x0 0x1000>;
interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0 0>, <&usbphy0 1>;
phy-names = "phy0", "phy1";
@@ -38,21 +38,21 @@
usbphy1: usb-phy@10000 {
compatible = "brcm,sr-usb-combo-phy";
- reg = <0x00010000 0x100>;
+ reg = <0x0 0x00010000 0x0 0x100>;
#phy-cells = <1>;
status = "disabled";
};
usbphy2: usb-phy@20000 {
compatible = "brcm,sr-usb-hs-phy";
- reg = <0x00020000 0x100>;
+ reg = <0x0 0x00020000 0x0 0x100>;
#phy-cells = <0>;
status = "disabled";
};
xhci1: usb@11000 {
compatible = "generic-xhci";
- reg = <0x00011000 0x1000>;
+ reg = <0x0 0x00011000 0x0 0x1000>;
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
phy-names = "phy0", "phy1", "phy2";
@@ -62,7 +62,7 @@
bdc1: usb@21000 {
compatible = "brcm,bdc-v0.16";
- reg = <0x00021000 0x1000>;
+ reg = <0x0 0x00021000 0x0 0x1000>;
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy2>;
phy-names = "phy0";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index f46eb47..8161dd2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -75,6 +75,7 @@
&enetc_port0 {
phy-handle = <&phy0>;
phy-connection-type = "sgmii";
+ managed = "in-band-status";
status = "okay";
mdio {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 73e4f94..7a6fb7e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1012,6 +1012,7 @@
compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x1c>;
#fsl,rcpm-wakeup-cells = <7>;
+ little-endian;
};
ftm_alarm0: timer@2800000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index ff58052..692d8f4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -805,6 +805,7 @@
compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x18>;
#fsl,rcpm-wakeup-cells = <6>;
+ little-endian;
};
ftm_alarm0: timer@2800000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index bf72918..e7abb74 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -892,6 +892,7 @@
compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x18>;
#fsl,rcpm-wakeup-cells = <6>;
+ little-endian;
};
ftm_alarm0: timer@2800000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 6de86a4..b88c3c9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -72,6 +72,7 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -210,6 +211,7 @@
host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
clocks = <&osc_32k>;
+ max-speed = <4000000>;
clock-names = "extclk";
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index f305a53..521eb3a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -121,6 +121,7 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index 4107fe9..4908252 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -135,13 +135,10 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
- /*
- * The interrupt is not correct. It should be level low,
- * however with internal pull up this causes IRQ storm.
- */
- interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
@@ -398,7 +395,7 @@
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
- MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x41
+ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index b83f400..05ee062 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -129,7 +129,7 @@
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <950000>;
opp-supported-hw = <0xc>, <0x7>;
clock-latency-ns = <150000>;
opp-suspend;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 46e76cf..7dfee71 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -53,6 +53,7 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index 707d848..8311b95 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -18,6 +18,7 @@
pmic: pmic@25 {
compatible = "nxp,pca9450b";
reg = <0x25>;
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index a2d0190..7f356ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -116,13 +116,10 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
- /*
- * The interrupt is not correct. It should be level low,
- * however with internal pull up this causes IRQ storm.
- */
- interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
regulators {
@@ -388,7 +385,7 @@
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
- MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x101
+ MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 746faf1..16c7202 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -790,28 +790,6 @@
#index-cells = <1>;
reg = <0x32e40200 0x200>;
};
-
- usbotg2: usb@32e50000 {
- compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
- reg = <0x32e50000 0x200>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
- clock-names = "usb1_ctrl_root_clk";
- assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
- <&clk IMX8MN_CLK_USB_CORE_REF>;
- assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
- <&clk IMX8MN_SYS_PLL1_100M>;
- fsl,usbphy = <&usbphynop2>;
- fsl,usbmisc = <&usbmisc2 0>;
- status = "disabled";
- };
-
- usbmisc2: usbmisc@32e50200 {
- compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
- #index-cells = <1>;
- reg = <0x32e50200 0x200>;
- };
-
};
dma_apbh: dma-controller@33000000 {
@@ -876,12 +854,4 @@
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
clock-names = "main_clk";
};
-
- usbphynop2: usbphynop2 {
- compatible = "usb-nop-xceiv";
- clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
- assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
- assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
- clock-names = "main_clk";
- };
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index 8bc6caa..4338db1 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -19,6 +19,7 @@
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
ptimer-handle = <&ptp_timer0>;
+ dma-coherent;
muram@0 {
compatible = "fsl,fman-muram";
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 96c50d4..a7a83f2 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -110,7 +110,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mt25qu02g";
+ compatible = "micron,mt25qu02g", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 381a84912..c28d51c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -10,18 +10,6 @@
model = "NVIDIA Jetson TX2 Developer Kit";
compatible = "nvidia,p2771-0000", "nvidia,tegra186";
- aconnect {
- status = "okay";
-
- dma-controller@2930000 {
- status = "okay";
- };
-
- interrupt-controller@2a40000 {
- status = "okay";
- };
- };
-
i2c@3160000 {
power-monitor@42 {
compatible = "ti,ina3221";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
index a2893be..0dc8304 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
@@ -54,7 +54,7 @@
status = "okay";
};
- serial@c280000 {
+ serial@3100000 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index e9c90f0..93438d2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1161,7 +1161,7 @@
hsp_aon: hsp@c150000 {
compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp";
- reg = <0x0c150000 0xa0000>;
+ reg = <0x0c150000 0x90000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index e18e1a9..a9caaf7c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1663,16 +1663,6 @@
vin-supply = <&vdd_5v0_sys>;
};
- vdd_usb_vbus_otg: regulator@11 {
- compatible = "regulator-fixed";
- regulator-name = "USB_VBUS_EN0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
-
vdd_hdmi: regulator@10 {
compatible = "regulator-fixed";
regulator-name = "VDD_HDMI_5V0";
@@ -1712,4 +1702,14 @@
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
+
+ vdd_usb_vbus_otg: regulator@14 {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_VBUS_EN0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
index f6e6a24..b5d9a552 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
@@ -8,7 +8,7 @@
compatible = "nvidia,tegra234-vdk", "nvidia,tegra234";
aliases {
- sdhci3 = "/cbb@0/sdhci@3460000";
+ mmc3 = "/bus@0/mmc@3460000";
serial0 = &uarta;
};
@@ -17,12 +17,12 @@
stdout-path = "serial0:115200n8";
};
- cbb@0 {
+ bus@0 {
serial@3100000 {
status = "okay";
};
- sdhci@3460000 {
+ mmc@3460000 {
status = "okay";
bus-width = <8>;
non-removable;
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index a94dac76..59e0cbf 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -179,22 +179,22 @@
};
soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x0 0xffffffff>;
dma-ranges;
compatible = "simple-bus";
prng: qrng@e1000 {
compatible = "qcom,prng-ee";
- reg = <0xe3000 0x1000>;
+ reg = <0x0 0xe3000 0x0 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
cryptobam: dma@704000 {
compatible = "qcom,bam-v1.7.0";
- reg = <0x00704000 0x20000>;
+ reg = <0x0 0x00704000 0x0 0x20000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "bam_clk";
@@ -206,7 +206,7 @@
crypto: crypto@73a000 {
compatible = "qcom,crypto-v5.1";
- reg = <0x0073a000 0x6000>;
+ reg = <0x0 0x0073a000 0x0 0x6000>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
<&gcc GCC_CRYPTO_AXI_CLK>,
<&gcc GCC_CRYPTO_CLK>;
@@ -217,7 +217,7 @@
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq6018-pinctrl";
- reg = <0x01000000 0x300000>;
+ reg = <0x0 0x01000000 0x0 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
@@ -235,7 +235,7 @@
gcc: gcc@1800000 {
compatible = "qcom,gcc-ipq6018";
- reg = <0x01800000 0x80000>;
+ reg = <0x0 0x01800000 0x0 0x80000>;
clocks = <&xo>, <&sleep_clk>;
clock-names = "xo", "sleep_clk";
#clock-cells = <1>;
@@ -244,17 +244,17 @@
tcsr_mutex_regs: syscon@1905000 {
compatible = "syscon";
- reg = <0x01905000 0x8000>;
+ reg = <0x0 0x01905000 0x0 0x8000>;
};
tcsr_q6: syscon@1945000 {
compatible = "syscon";
- reg = <0x01945000 0xe000>;
+ reg = <0x0 0x01945000 0x0 0xe000>;
};
blsp_dma: dma@7884000 {
compatible = "qcom,bam-v1.7.0";
- reg = <0x07884000 0x2b000>;
+ reg = <0x0 0x07884000 0x0 0x2b000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
@@ -264,7 +264,7 @@
blsp1_uart3: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x078b1000 0x200>;
+ reg = <0x0 0x078b1000 0x0 0x200>;
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
@@ -276,7 +276,7 @@
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x078b5000 0x600>;
+ reg = <0x0 0x078b5000 0x0 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
@@ -291,7 +291,7 @@
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x078b6000 0x600>;
+ reg = <0x0 0x078b6000 0x0 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
@@ -306,7 +306,7 @@
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x078b6000 0x600>;
+ reg = <0x0 0x078b6000 0x0 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
@@ -321,7 +321,7 @@
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x078b7000 0x600>;
+ reg = <0x0 0x078b7000 0x0 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
@@ -336,24 +336,24 @@
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <0x3>;
- reg = <0x0b000000 0x1000>, /*GICD*/
- <0x0b002000 0x1000>, /*GICC*/
- <0x0b001000 0x1000>, /*GICH*/
- <0x0b004000 0x1000>; /*GICV*/
+ reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/
+ <0x0 0x0b002000 0x0 0x1000>, /*GICC*/
+ <0x0 0x0b001000 0x0 0x1000>, /*GICH*/
+ <0x0 0x0b004000 0x0 0x1000>; /*GICV*/
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
watchdog@b017000 {
compatible = "qcom,kpss-wdt";
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
- reg = <0x0b017000 0x40>;
+ reg = <0x0 0x0b017000 0x0 0x40>;
clocks = <&sleep_clk>;
timeout-sec = <10>;
};
apcs_glb: mailbox@b111000 {
compatible = "qcom,ipq6018-apcs-apps-global";
- reg = <0x0b111000 0x1000>;
+ reg = <0x0 0x0b111000 0x0 0x1000>;
#clock-cells = <1>;
clocks = <&a53pll>, <&xo>;
clock-names = "pll", "xo";
@@ -362,7 +362,7 @@
a53pll: clock@b116000 {
compatible = "qcom,ipq6018-a53pll";
- reg = <0x0b116000 0x40>;
+ reg = <0x0 0x0b116000 0x0 0x40>;
#clock-cells = <0>;
clocks = <&xo>;
clock-names = "xo";
@@ -377,68 +377,68 @@
};
timer@b120000 {
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
compatible = "arm,armv7-timer-mem";
- reg = <0x0b120000 0x1000>;
+ reg = <0x0 0x0b120000 0x0 0x1000>;
clock-frequency = <19200000>;
frame@b120000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b121000 0x1000>,
- <0x0b122000 0x1000>;
+ reg = <0x0 0x0b121000 0x0 0x1000>,
+ <0x0 0x0b122000 0x0 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb123000 0x1000>;
+ reg = <0x0 0xb123000 0x0 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b124000 0x1000>;
+ reg = <0x0 0x0b124000 0x0 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b125000 0x1000>;
+ reg = <0x0 0x0b125000 0x0 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b126000 0x1000>;
+ reg = <0x0 0x0b126000 0x0 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b127000 0x1000>;
+ reg = <0x0 0x0b127000 0x0 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b128000 0x1000>;
+ reg = <0x0 0x0b128000 0x0 0x1000>;
status = "disabled";
};
};
q6v5_wcss: remoteproc@cd00000 {
compatible = "qcom,ipq8074-wcss-pil";
- reg = <0x0cd00000 0x4040>,
- <0x004ab000 0x20>;
+ reg = <0x0 0x0cd00000 0x0 0x4040>,
+ <0x0 0x004ab000 0x0 0x20>;
reg-names = "qdsp6",
"rmb";
interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 9cbf963..c296434 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -28,6 +28,12 @@
clock-frequency = <0>;
};
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
audio_clk_c: audio_clk_c {
compatible = "fixed-clock";
#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 35bd6b9..3376810 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -243,7 +243,6 @@
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
- rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "rk808-clkout1", "xin32k";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index be7a31d..2ee07d1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -20,7 +20,7 @@
gmac_clk: gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
- clock-output-names = "gmac_clk";
+ clock-output-names = "gmac_clkin";
#clock-cells = <0>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index e7a459f..2030907 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -74,14 +74,14 @@
label = "red:diy";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
default-state = "off";
- linux,default-trigger = "mmc1";
+ linux,default-trigger = "mmc2";
};
yellow_led: led-2 {
label = "yellow:yellow-led";
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
default-state = "off";
- linux,default-trigger = "mmc0";
+ linux,default-trigger = "mmc1";
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index ada724b..7a9a7ac 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -29,6 +29,9 @@
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
diff --git a/arch/arm64/include/asm/brk-imm.h b/arch/arm64/include/asm/brk-imm.h
index e3d47b52..ec7720d 100644
--- a/arch/arm64/include/asm/brk-imm.h
+++ b/arch/arm64/include/asm/brk-imm.h
@@ -10,6 +10,7 @@
* #imm16 values used for BRK instruction generation
* 0x004: for installing kprobes
* 0x005: for installing uprobes
+ * 0x006: for kprobe software single-step
* Allowed values for kgdb are 0x400 - 0x7ff
* 0x100: for triggering a fault on purpose (reserved)
* 0x400: for dynamic BRK instruction
@@ -19,6 +20,7 @@
*/
#define KPROBES_BRK_IMM 0x004
#define UPROBES_BRK_IMM 0x005
+#define KPROBES_BRK_SS_IMM 0x006
#define FAULT_BRK_IMM 0x100
#define KGDB_DYN_DBG_BRK_IMM 0x400
#define KGDB_COMPILED_DBG_BRK_IMM 0x401
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 97244d4..da250e4 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -268,6 +268,8 @@
/*
* CPU feature detected at boot time based on feature of one or more CPUs.
* All possible conflicts for a late CPU are ignored.
+ * NOTE: this means that a late CPU with the feature will *not* cause the
+ * capability to be advertised by cpus_have_*cap()!
*/
#define ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE \
(ARM64_CPUCAP_SCOPE_LOCAL_CPU | \
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 9e2e9a6..ef5b040 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -86,6 +86,8 @@
#define QCOM_CPU_PART_FALKOR_V1 0x800
#define QCOM_CPU_PART_FALKOR 0xC00
#define QCOM_CPU_PART_KRYO 0x200
+#define QCOM_CPU_PART_KRYO_2XX_GOLD 0x800
+#define QCOM_CPU_PART_KRYO_2XX_SILVER 0x801
#define QCOM_CPU_PART_KRYO_3XX_SILVER 0x803
#define QCOM_CPU_PART_KRYO_4XX_GOLD 0x804
#define QCOM_CPU_PART_KRYO_4XX_SILVER 0x805
@@ -116,6 +118,8 @@
#define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
#define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
#define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO)
+#define MIDR_QCOM_KRYO_2XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_GOLD)
+#define MIDR_QCOM_KRYO_2XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_SILVER)
#define MIDR_QCOM_KRYO_3XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_SILVER)
#define MIDR_QCOM_KRYO_4XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_GOLD)
#define MIDR_QCOM_KRYO_4XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_SILVER)
diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index ec213b4..1c26d7b 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -128,6 +128,9 @@
{
unsigned long flags = regs->pstate & DAIF_MASK;
+ if (interrupts_enabled(regs))
+ trace_hardirqs_on();
+
/*
* We can't use local_daif_restore(regs->pstate) here as
* system_has_prio_mask_debugging() won't restore the I bit if it can
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index 0b298f4..657c921 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -53,6 +53,7 @@
/* kprobes BRK opcodes with ESR encoding */
#define BRK64_OPCODE_KPROBES (AARCH64_BREAK_MON | (KPROBES_BRK_IMM << 5))
+#define BRK64_OPCODE_KPROBES_SS (AARCH64_BREAK_MON | (KPROBES_BRK_SS_IMM << 5))
/* uprobes BRK opcodes with ESR encoding */
#define BRK64_OPCODE_UPROBES (AARCH64_BREAK_MON | (UPROBES_BRK_IMM << 5))
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index 22c81f1..85a3e49 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -104,6 +104,7 @@
/* Shared ISS fault status code(IFSC/DFSC) for Data/Instruction aborts */
#define ESR_ELx_FSC (0x3F)
#define ESR_ELx_FSC_TYPE (0x3C)
+#define ESR_ELx_FSC_LEVEL (0x03)
#define ESR_ELx_FSC_EXTABT (0x10)
#define ESR_ELx_FSC_SERROR (0x11)
#define ESR_ELx_FSC_ACCESS (0x08)
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index 99b9383..0756191 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -31,7 +31,12 @@
return esr;
}
+asmlinkage void noinstr enter_el1_irq_or_nmi(struct pt_regs *regs);
+asmlinkage void noinstr exit_el1_irq_or_nmi(struct pt_regs *regs);
asmlinkage void enter_from_user_mode(void);
+asmlinkage void exit_to_user_mode(void);
+void arm64_enter_nmi(struct pt_regs *regs);
+void arm64_exit_nmi(struct pt_regs *regs);
void do_mem_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs);
void do_undefinstr(struct pt_regs *regs);
void do_bti(struct pt_regs *regs);
diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h
index 97e511d..8699ce3 100644
--- a/arch/arm64/include/asm/kprobes.h
+++ b/arch/arm64/include/asm/kprobes.h
@@ -16,7 +16,7 @@
#include <linux/percpu.h>
#define __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE 1
+#define MAX_INSN_SIZE 2
#define flush_insn_slot(p) do { } while (0)
#define kretprobe_blacklist_size 0
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 5ef2669..00bc6f1 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -350,6 +350,11 @@
return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_TYPE;
}
+static __always_inline u8 kvm_vcpu_trap_get_fault_level(const struct kvm_vcpu *vcpu)
+{
+ return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_LEVEL;
+}
+
static __always_inline bool kvm_vcpu_abt_issea(const struct kvm_vcpu *vcpu)
{
switch (kvm_vcpu_trap_get_fault(vcpu)) {
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 781d029..0cd9f0f 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -118,6 +118,8 @@
*/
unsigned long *pmu_filter;
unsigned int pmuver;
+
+ u8 pfr0_csv2;
};
struct kvm_vcpu_fault_info {
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 4ff12a7..5628289 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -115,8 +115,6 @@
#define pte_valid(pte) (!!(pte_val(pte) & PTE_VALID))
#define pte_valid_not_user(pte) \
((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID)
-#define pte_valid_young(pte) \
- ((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF))
#define pte_valid_user(pte) \
((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
@@ -124,9 +122,12 @@
* Could the pte be present in the TLB? We must check mm_tlb_flush_pending
* so that we don't erroneously return false for pages that have been
* remapped as PROT_NONE but are yet to be flushed from the TLB.
+ * Note that we can't make any assumptions based on the state of the access
+ * flag, since ptep_clear_flush_young() elides a DSB when invalidating the
+ * TLB.
*/
#define pte_accessible(mm, pte) \
- (mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid_young(pte))
+ (mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte))
/*
* p??_access_permitted() is true for valid user mappings (subject to the
@@ -164,13 +165,6 @@
return pmd;
}
-static inline pte_t pte_wrprotect(pte_t pte)
-{
- pte = clear_pte_bit(pte, __pgprot(PTE_WRITE));
- pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
- return pte;
-}
-
static inline pte_t pte_mkwrite(pte_t pte)
{
pte = set_pte_bit(pte, __pgprot(PTE_WRITE));
@@ -196,6 +190,20 @@
return pte;
}
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ /*
+ * If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
+ * clear), set the PTE_DIRTY bit.
+ */
+ if (pte_hw_dirty(pte))
+ pte = pte_mkdirty(pte);
+
+ pte = clear_pte_bit(pte, __pgprot(PTE_WRITE));
+ pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
+ return pte;
+}
+
static inline pte_t pte_mkold(pte_t pte)
{
return clear_pte_bit(pte, __pgprot(PTE_AF));
@@ -845,12 +853,6 @@
pte = READ_ONCE(*ptep);
do {
old_pte = pte;
- /*
- * If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
- * clear), set the PTE_DIRTY bit.
- */
- if (pte_hw_dirty(pte))
- pte = pte_mkdirty(pte);
pte = pte_wrprotect(pte);
pte_val(pte) = cmpxchg_relaxed(&pte_val(*ptep),
pte_val(old_pte), pte_val(pte));
diff --git a/arch/arm64/include/asm/probes.h b/arch/arm64/include/asm/probes.h
index 4266262..0069467 100644
--- a/arch/arm64/include/asm/probes.h
+++ b/arch/arm64/include/asm/probes.h
@@ -7,6 +7,8 @@
#ifndef _ARM_PROBES_H
#define _ARM_PROBES_H
+#include <asm/insn.h>
+
typedef u32 probe_opcode_t;
typedef void (probes_handler_t) (u32 opcode, long addr, struct pt_regs *);
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 997cf8c..28c85b8 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -193,6 +193,10 @@
/* Only valid when ARM64_HAS_IRQ_PRIO_MASKING is enabled. */
u64 pmr_save;
u64 stackframe[2];
+
+ /* Only valid for some EL1 exceptions. */
+ u64 lockdep_hardirqs;
+ u64 exit_rcu;
};
static inline bool in_syscall(struct pt_regs const *regs)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 174817b..801861d 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -372,6 +372,8 @@
#define SYS_CONTEXTIDR_EL1 sys_reg(3, 0, 13, 0, 1)
#define SYS_TPIDR_EL1 sys_reg(3, 0, 13, 0, 4)
+#define SYS_SCXTNUM_EL1 sys_reg(3, 0, 13, 0, 7)
+
#define SYS_CNTKCTL_EL1 sys_reg(3, 0, 14, 1, 0)
#define SYS_CCSIDR_EL1 sys_reg(3, 1, 0, 0, 0)
@@ -404,6 +406,8 @@
#define SYS_TPIDR_EL0 sys_reg(3, 3, 13, 0, 2)
#define SYS_TPIDRRO_EL0 sys_reg(3, 3, 13, 0, 3)
+#define SYS_SCXTNUM_EL0 sys_reg(3, 3, 13, 0, 7)
+
/* Definitions for system register interface to AMU for ARMv8.4 onwards */
#define SYS_AM_EL0(crm, op2) sys_reg(3, 3, 13, (crm), (op2))
#define SYS_AMCR_EL0 SYS_AM_EL0(2, 0)
@@ -983,7 +987,7 @@
#define SYS_TFSR_EL1_TF0_SHIFT 0
#define SYS_TFSR_EL1_TF1_SHIFT 1
#define SYS_TFSR_EL1_TF0 (UL(1) << SYS_TFSR_EL1_TF0_SHIFT)
-#define SYS_TFSR_EL1_TF1 (UK(2) << SYS_TFSR_EL1_TF1_SHIFT)
+#define SYS_TFSR_EL1_TF1 (UL(1) << SYS_TFSR_EL1_TF1_SHIFT)
/* Safe value for MPIDR_EL1: Bit31:RES1, Bit30:U:0, Bit24:MT:0 */
#define SYS_MPIDR_SAFE_VAL (BIT(31))
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 61314fd..cafaf0d 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -299,6 +299,8 @@
MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
/* Brahma-B53 r0p[0] */
MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
+ /* Kryo2XX Silver rAp4 */
+ MIDR_REV(MIDR_QCOM_KRYO_2XX_SILVER, 0xa, 0x4),
{},
};
#endif
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index dcc165b..6f36c4f 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1337,6 +1337,8 @@
MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
MIDR_ALL_VERSIONS(MIDR_HISI_TSV110),
MIDR_ALL_VERSIONS(MIDR_NVIDIA_CARMEL),
+ MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_GOLD),
+ MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_SILVER),
MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
{ /* sentinel */ }
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index 43d4c32..70e0a75 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -17,40 +17,164 @@
#include <asm/mmu.h>
#include <asm/sysreg.h>
-static void notrace el1_abort(struct pt_regs *regs, unsigned long esr)
+/*
+ * This is intended to match the logic in irqentry_enter(), handling the kernel
+ * mode transitions only.
+ */
+static void noinstr enter_from_kernel_mode(struct pt_regs *regs)
+{
+ regs->exit_rcu = false;
+
+ if (!IS_ENABLED(CONFIG_TINY_RCU) && is_idle_task(current)) {
+ lockdep_hardirqs_off(CALLER_ADDR0);
+ rcu_irq_enter();
+ trace_hardirqs_off_finish();
+
+ regs->exit_rcu = true;
+ return;
+ }
+
+ lockdep_hardirqs_off(CALLER_ADDR0);
+ rcu_irq_enter_check_tick();
+ trace_hardirqs_off_finish();
+}
+
+/*
+ * This is intended to match the logic in irqentry_exit(), handling the kernel
+ * mode transitions only, and with preemption handled elsewhere.
+ */
+static void noinstr exit_to_kernel_mode(struct pt_regs *regs)
+{
+ lockdep_assert_irqs_disabled();
+
+ if (interrupts_enabled(regs)) {
+ if (regs->exit_rcu) {
+ trace_hardirqs_on_prepare();
+ lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+ rcu_irq_exit();
+ lockdep_hardirqs_on(CALLER_ADDR0);
+ return;
+ }
+
+ trace_hardirqs_on();
+ } else {
+ if (regs->exit_rcu)
+ rcu_irq_exit();
+ }
+}
+
+void noinstr arm64_enter_nmi(struct pt_regs *regs)
+{
+ regs->lockdep_hardirqs = lockdep_hardirqs_enabled();
+
+ __nmi_enter();
+ lockdep_hardirqs_off(CALLER_ADDR0);
+ lockdep_hardirq_enter();
+ rcu_nmi_enter();
+
+ trace_hardirqs_off_finish();
+ ftrace_nmi_enter();
+}
+
+void noinstr arm64_exit_nmi(struct pt_regs *regs)
+{
+ bool restore = regs->lockdep_hardirqs;
+
+ ftrace_nmi_exit();
+ if (restore) {
+ trace_hardirqs_on_prepare();
+ lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+ }
+
+ rcu_nmi_exit();
+ lockdep_hardirq_exit();
+ if (restore)
+ lockdep_hardirqs_on(CALLER_ADDR0);
+ __nmi_exit();
+}
+
+asmlinkage void noinstr enter_el1_irq_or_nmi(struct pt_regs *regs)
+{
+ if (IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && !interrupts_enabled(regs))
+ arm64_enter_nmi(regs);
+ else
+ enter_from_kernel_mode(regs);
+}
+
+asmlinkage void noinstr exit_el1_irq_or_nmi(struct pt_regs *regs)
+{
+ if (IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && !interrupts_enabled(regs))
+ arm64_exit_nmi(regs);
+ else
+ exit_to_kernel_mode(regs);
+}
+
+static void noinstr el1_abort(struct pt_regs *regs, unsigned long esr)
{
unsigned long far = read_sysreg(far_el1);
+ enter_from_kernel_mode(regs);
local_daif_inherit(regs);
far = untagged_addr(far);
do_mem_abort(far, esr, regs);
+ local_daif_mask();
+ exit_to_kernel_mode(regs);
}
-NOKPROBE_SYMBOL(el1_abort);
-static void notrace el1_pc(struct pt_regs *regs, unsigned long esr)
+static void noinstr el1_pc(struct pt_regs *regs, unsigned long esr)
{
unsigned long far = read_sysreg(far_el1);
+ enter_from_kernel_mode(regs);
local_daif_inherit(regs);
do_sp_pc_abort(far, esr, regs);
+ local_daif_mask();
+ exit_to_kernel_mode(regs);
}
-NOKPROBE_SYMBOL(el1_pc);
-static void notrace el1_undef(struct pt_regs *regs)
+static void noinstr el1_undef(struct pt_regs *regs)
{
+ enter_from_kernel_mode(regs);
local_daif_inherit(regs);
do_undefinstr(regs);
+ local_daif_mask();
+ exit_to_kernel_mode(regs);
}
-NOKPROBE_SYMBOL(el1_undef);
-static void notrace el1_inv(struct pt_regs *regs, unsigned long esr)
+static void noinstr el1_inv(struct pt_regs *regs, unsigned long esr)
{
+ enter_from_kernel_mode(regs);
local_daif_inherit(regs);
bad_mode(regs, 0, esr);
+ local_daif_mask();
+ exit_to_kernel_mode(regs);
}
-NOKPROBE_SYMBOL(el1_inv);
-static void notrace el1_dbg(struct pt_regs *regs, unsigned long esr)
+static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs)
+{
+ regs->lockdep_hardirqs = lockdep_hardirqs_enabled();
+
+ lockdep_hardirqs_off(CALLER_ADDR0);
+ rcu_nmi_enter();
+
+ trace_hardirqs_off_finish();
+}
+
+static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs)
+{
+ bool restore = regs->lockdep_hardirqs;
+
+ if (restore) {
+ trace_hardirqs_on_prepare();
+ lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+ }
+
+ rcu_nmi_exit();
+ if (restore)
+ lockdep_hardirqs_on(CALLER_ADDR0);
+}
+
+static void noinstr el1_dbg(struct pt_regs *regs, unsigned long esr)
{
unsigned long far = read_sysreg(far_el1);
@@ -62,18 +186,21 @@
if (system_uses_irq_prio_masking())
gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+ arm64_enter_el1_dbg(regs);
do_debug_exception(far, esr, regs);
+ arm64_exit_el1_dbg(regs);
}
-NOKPROBE_SYMBOL(el1_dbg);
-static void notrace el1_fpac(struct pt_regs *regs, unsigned long esr)
+static void noinstr el1_fpac(struct pt_regs *regs, unsigned long esr)
{
+ enter_from_kernel_mode(regs);
local_daif_inherit(regs);
do_ptrauth_fault(regs, esr);
+ local_daif_mask();
+ exit_to_kernel_mode(regs);
}
-NOKPROBE_SYMBOL(el1_fpac);
-asmlinkage void notrace el1_sync_handler(struct pt_regs *regs)
+asmlinkage void noinstr el1_sync_handler(struct pt_regs *regs)
{
unsigned long esr = read_sysreg(esr_el1);
@@ -106,20 +233,34 @@
el1_inv(regs, esr);
}
}
-NOKPROBE_SYMBOL(el1_sync_handler);
-static void notrace el0_da(struct pt_regs *regs, unsigned long esr)
+asmlinkage void noinstr enter_from_user_mode(void)
+{
+ lockdep_hardirqs_off(CALLER_ADDR0);
+ CT_WARN_ON(ct_state() != CONTEXT_USER);
+ user_exit_irqoff();
+ trace_hardirqs_off_finish();
+}
+
+asmlinkage void noinstr exit_to_user_mode(void)
+{
+ trace_hardirqs_on_prepare();
+ lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+ user_enter_irqoff();
+ lockdep_hardirqs_on(CALLER_ADDR0);
+}
+
+static void noinstr el0_da(struct pt_regs *regs, unsigned long esr)
{
unsigned long far = read_sysreg(far_el1);
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
far = untagged_addr(far);
do_mem_abort(far, esr, regs);
}
-NOKPROBE_SYMBOL(el0_da);
-static void notrace el0_ia(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_ia(struct pt_regs *regs, unsigned long esr)
{
unsigned long far = read_sysreg(far_el1);
@@ -131,90 +272,80 @@
if (!is_ttbr0_addr(far))
arm64_apply_bp_hardening();
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_mem_abort(far, esr, regs);
}
-NOKPROBE_SYMBOL(el0_ia);
-static void notrace el0_fpsimd_acc(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_fpsimd_acc(struct pt_regs *regs, unsigned long esr)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_fpsimd_acc(esr, regs);
}
-NOKPROBE_SYMBOL(el0_fpsimd_acc);
-static void notrace el0_sve_acc(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_sve_acc(struct pt_regs *regs, unsigned long esr)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_sve_acc(esr, regs);
}
-NOKPROBE_SYMBOL(el0_sve_acc);
-static void notrace el0_fpsimd_exc(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_fpsimd_exc(struct pt_regs *regs, unsigned long esr)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_fpsimd_exc(esr, regs);
}
-NOKPROBE_SYMBOL(el0_fpsimd_exc);
-static void notrace el0_sys(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_sys(struct pt_regs *regs, unsigned long esr)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_sysinstr(esr, regs);
}
-NOKPROBE_SYMBOL(el0_sys);
-static void notrace el0_pc(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_pc(struct pt_regs *regs, unsigned long esr)
{
unsigned long far = read_sysreg(far_el1);
if (!is_ttbr0_addr(instruction_pointer(regs)))
arm64_apply_bp_hardening();
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_sp_pc_abort(far, esr, regs);
}
-NOKPROBE_SYMBOL(el0_pc);
-static void notrace el0_sp(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_sp(struct pt_regs *regs, unsigned long esr)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_sp_pc_abort(regs->sp, esr, regs);
}
-NOKPROBE_SYMBOL(el0_sp);
-static void notrace el0_undef(struct pt_regs *regs)
+static void noinstr el0_undef(struct pt_regs *regs)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_undefinstr(regs);
}
-NOKPROBE_SYMBOL(el0_undef);
-static void notrace el0_bti(struct pt_regs *regs)
+static void noinstr el0_bti(struct pt_regs *regs)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_bti(regs);
}
-NOKPROBE_SYMBOL(el0_bti);
-static void notrace el0_inv(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_inv(struct pt_regs *regs, unsigned long esr)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
bad_el0_sync(regs, 0, esr);
}
-NOKPROBE_SYMBOL(el0_inv);
-static void notrace el0_dbg(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr)
{
/* Only watchpoints write FAR_EL1, otherwise its UNKNOWN */
unsigned long far = read_sysreg(far_el1);
@@ -222,30 +353,28 @@
if (system_uses_irq_prio_masking())
gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
- user_exit_irqoff();
+ enter_from_user_mode();
do_debug_exception(far, esr, regs);
local_daif_restore(DAIF_PROCCTX_NOIRQ);
}
-NOKPROBE_SYMBOL(el0_dbg);
-static void notrace el0_svc(struct pt_regs *regs)
+static void noinstr el0_svc(struct pt_regs *regs)
{
if (system_uses_irq_prio_masking())
gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+ enter_from_user_mode();
do_el0_svc(regs);
}
-NOKPROBE_SYMBOL(el0_svc);
-static void notrace el0_fpac(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_fpac(struct pt_regs *regs, unsigned long esr)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_ptrauth_fault(regs, esr);
}
-NOKPROBE_SYMBOL(el0_fpac);
-asmlinkage void notrace el0_sync_handler(struct pt_regs *regs)
+asmlinkage void noinstr el0_sync_handler(struct pt_regs *regs)
{
unsigned long esr = read_sysreg(esr_el1);
@@ -297,27 +426,25 @@
el0_inv(regs, esr);
}
}
-NOKPROBE_SYMBOL(el0_sync_handler);
#ifdef CONFIG_COMPAT
-static void notrace el0_cp15(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_cp15(struct pt_regs *regs, unsigned long esr)
{
- user_exit_irqoff();
+ enter_from_user_mode();
local_daif_restore(DAIF_PROCCTX);
do_cp15instr(esr, regs);
}
-NOKPROBE_SYMBOL(el0_cp15);
-static void notrace el0_svc_compat(struct pt_regs *regs)
+static void noinstr el0_svc_compat(struct pt_regs *regs)
{
if (system_uses_irq_prio_masking())
gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+ enter_from_user_mode();
do_el0_svc_compat(regs);
}
-NOKPROBE_SYMBOL(el0_svc_compat);
-asmlinkage void notrace el0_sync_compat_handler(struct pt_regs *regs)
+asmlinkage void noinstr el0_sync_compat_handler(struct pt_regs *regs)
{
unsigned long esr = read_sysreg(esr_el1);
@@ -360,5 +487,4 @@
el0_inv(regs, esr);
}
}
-NOKPROBE_SYMBOL(el0_sync_compat_handler);
#endif /* CONFIG_COMPAT */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index b295fb9..d72c818 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -30,18 +30,18 @@
#include <asm/unistd.h>
/*
- * Context tracking subsystem. Used to instrument transitions
- * between user and kernel mode.
+ * Context tracking and irqflag tracing need to instrument transitions between
+ * user and kernel mode.
*/
- .macro ct_user_exit_irqoff
-#ifdef CONFIG_CONTEXT_TRACKING
+ .macro user_exit_irqoff
+#if defined(CONFIG_CONTEXT_TRACKING) || defined(CONFIG_TRACE_IRQFLAGS)
bl enter_from_user_mode
#endif
.endm
- .macro ct_user_enter
-#ifdef CONFIG_CONTEXT_TRACKING
- bl context_tracking_user_enter
+ .macro user_enter_irqoff
+#if defined(CONFIG_CONTEXT_TRACKING) || defined(CONFIG_TRACE_IRQFLAGS)
+ bl exit_to_user_mode
#endif
.endm
@@ -298,9 +298,6 @@
alternative_else_nop_endif
ldp x21, x22, [sp, #S_PC] // load ELR, SPSR
- .if \el == 0
- ct_user_enter
- .endif
#ifdef CONFIG_ARM64_SW_TTBR0_PAN
alternative_if_not ARM64_HAS_PAN
@@ -637,16 +634,8 @@
gic_prio_irq_setup pmr=x20, tmp=x1
enable_da_f
-#ifdef CONFIG_ARM64_PSEUDO_NMI
- test_irqs_unmasked res=x0, pmr=x20
- cbz x0, 1f
- bl asm_nmi_enter
-1:
-#endif
-
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_off
-#endif
+ mov x0, sp
+ bl enter_el1_irq_or_nmi
irq_handler
@@ -665,26 +654,8 @@
1:
#endif
-#ifdef CONFIG_ARM64_PSEUDO_NMI
- /*
- * When using IRQ priority masking, we can get spurious interrupts while
- * PMR is set to GIC_PRIO_IRQOFF. An NMI might also have occurred in a
- * section with interrupts disabled. Skip tracing in those cases.
- */
- test_irqs_unmasked res=x0, pmr=x20
- cbz x0, 1f
- bl asm_nmi_exit
-1:
-#endif
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-#ifdef CONFIG_ARM64_PSEUDO_NMI
- test_irqs_unmasked res=x0, pmr=x20
- cbnz x0, 1f
-#endif
- bl trace_hardirqs_on
-1:
-#endif
+ mov x0, sp
+ bl exit_el1_irq_or_nmi
kernel_exit 1
SYM_CODE_END(el1_irq)
@@ -726,21 +697,14 @@
kernel_entry 0
el0_irq_naked:
gic_prio_irq_setup pmr=x20, tmp=x0
- ct_user_exit_irqoff
+ user_exit_irqoff
enable_da_f
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_off
-#endif
-
tbz x22, #55, 1f
bl do_el0_irq_bp_hardening
1:
irq_handler
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_on
-#endif
b ret_to_user
SYM_CODE_END(el0_irq)
@@ -759,7 +723,7 @@
el0_error_naked:
mrs x25, esr_el1
gic_prio_kentry_setup tmp=x2
- ct_user_exit_irqoff
+ user_exit_irqoff
enable_dbg
mov x0, sp
mov x1, x25
@@ -774,13 +738,17 @@
SYM_CODE_START_LOCAL(ret_to_user)
disable_daif
gic_prio_kentry_setup tmp=x3
- ldr x1, [tsk, #TSK_TI_FLAGS]
- and x2, x1, #_TIF_WORK_MASK
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl trace_hardirqs_off
+#endif
+ ldr x19, [tsk, #TSK_TI_FLAGS]
+ and x2, x19, #_TIF_WORK_MASK
cbnz x2, work_pending
finish_ret_to_user:
+ user_enter_irqoff
/* Ignore asynchronous tag check faults in the uaccess routines */
clear_mte_async_tcf
- enable_step_tsk x1, x2
+ enable_step_tsk x19, x2
#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
bl stackleak_erase
#endif
@@ -791,11 +759,9 @@
*/
work_pending:
mov x0, sp // 'regs'
+ mov x1, x19
bl do_notify_resume
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_on // enabled while in userspace
-#endif
- ldr x1, [tsk, #TSK_TI_FLAGS] // re-check for single-step
+ ldr x19, [tsk, #TSK_TI_FLAGS] // re-check for single-step
b finish_ret_to_user
SYM_CODE_END(ret_to_user)
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 9cf2fb8..60456a6 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -67,18 +67,3 @@
local_daif_restore(DAIF_PROCCTX_NOIRQ);
}
}
-
-/*
- * Stubs to make nmi_enter/exit() code callable from ASM
- */
-asmlinkage void notrace asm_nmi_enter(void)
-{
- nmi_enter();
-}
-NOKPROBE_SYMBOL(asm_nmi_enter);
-
-asmlinkage void notrace asm_nmi_exit(void)
-{
- nmi_exit();
-}
-NOKPROBE_SYMBOL(asm_nmi_exit);
diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c
index af9987c..9ec3469 100644
--- a/arch/arm64/kernel/kexec_image.c
+++ b/arch/arm64/kernel/kexec_image.c
@@ -43,7 +43,7 @@
u64 flags, value;
bool be_image, be_kernel;
struct kexec_buf kbuf;
- unsigned long text_offset;
+ unsigned long text_offset, kernel_segment_number;
struct kexec_segment *kernel_segment;
int ret;
@@ -88,11 +88,37 @@
/* Adjust kernel segment with TEXT_OFFSET */
kbuf.memsz += text_offset;
- ret = kexec_add_buffer(&kbuf);
- if (ret)
- return ERR_PTR(ret);
+ kernel_segment_number = image->nr_segments;
- kernel_segment = &image->segment[image->nr_segments - 1];
+ /*
+ * The location of the kernel segment may make it impossible to satisfy
+ * the other segment requirements, so we try repeatedly to find a
+ * location that will work.
+ */
+ while ((ret = kexec_add_buffer(&kbuf)) == 0) {
+ /* Try to load additional data */
+ kernel_segment = &image->segment[kernel_segment_number];
+ ret = load_other_segments(image, kernel_segment->mem,
+ kernel_segment->memsz, initrd,
+ initrd_len, cmdline);
+ if (!ret)
+ break;
+
+ /*
+ * We couldn't find space for the other segments; erase the
+ * kernel segment and try the next available hole.
+ */
+ image->nr_segments -= 1;
+ kbuf.buf_min = kernel_segment->mem + kernel_segment->memsz;
+ kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+ }
+
+ if (ret) {
+ pr_err("Could not find any suitable kernel location!");
+ return ERR_PTR(ret);
+ }
+
+ kernel_segment = &image->segment[kernel_segment_number];
kernel_segment->mem += text_offset;
kernel_segment->memsz -= text_offset;
image->start = kernel_segment->mem;
@@ -101,12 +127,7 @@
kernel_segment->mem, kbuf.bufsz,
kernel_segment->memsz);
- /* Load additional data */
- ret = load_other_segments(image,
- kernel_segment->mem, kernel_segment->memsz,
- initrd, initrd_len, cmdline);
-
- return ERR_PTR(ret);
+ return NULL;
}
#ifdef CONFIG_KEXEC_IMAGE_VERIFY_SIG
diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c
index 5b0e67b..03210f6 100644
--- a/arch/arm64/kernel/machine_kexec_file.c
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -240,6 +240,11 @@
return ret;
}
+/*
+ * Tries to add the initrd and DTB to the image. If it is not possible to find
+ * valid locations, this function will undo changes to the image and return non
+ * zero.
+ */
int load_other_segments(struct kimage *image,
unsigned long kernel_load_addr,
unsigned long kernel_size,
@@ -248,7 +253,8 @@
{
struct kexec_buf kbuf;
void *headers, *dtb = NULL;
- unsigned long headers_sz, initrd_load_addr = 0, dtb_len;
+ unsigned long headers_sz, initrd_load_addr = 0, dtb_len,
+ orig_segments = image->nr_segments;
int ret = 0;
kbuf.image = image;
@@ -334,6 +340,7 @@
return 0;
out_err:
+ image->nr_segments = orig_segments;
vfree(dtb);
return ret;
}
diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c
index 94e8718..f6f58e6 100644
--- a/arch/arm64/kernel/perf_regs.c
+++ b/arch/arm64/kernel/perf_regs.c
@@ -73,8 +73,7 @@
}
void perf_get_regs_user(struct perf_regs *regs_user,
- struct pt_regs *regs,
- struct pt_regs *regs_user_copy)
+ struct pt_regs *regs)
{
regs_user->regs = task_pt_regs(current);
regs_user->abi = perf_reg_abi(current);
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index deba7381..f11a1a1 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -36,25 +36,16 @@
static void __kprobes
post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
-static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode)
-{
- void *addrs[1];
- u32 insns[1];
-
- addrs[0] = addr;
- insns[0] = opcode;
-
- return aarch64_insn_patch_text(addrs, insns, 1);
-}
-
static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
{
- /* prepare insn slot */
- patch_text(p->ainsn.api.insn, p->opcode);
+ kprobe_opcode_t *addr = p->ainsn.api.insn;
+ void *addrs[] = {addr, addr + 1};
+ u32 insns[] = {p->opcode, BRK64_OPCODE_KPROBES_SS};
- flush_icache_range((uintptr_t) (p->ainsn.api.insn),
- (uintptr_t) (p->ainsn.api.insn) +
- MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+ /* prepare insn slot */
+ aarch64_insn_patch_text(addrs, insns, 2);
+
+ flush_icache_range((uintptr_t)addr, (uintptr_t)(addr + MAX_INSN_SIZE));
/*
* Needs restoring of return address after stepping xol.
@@ -128,13 +119,18 @@
/* arm kprobe: install breakpoint in text */
void __kprobes arch_arm_kprobe(struct kprobe *p)
{
- patch_text(p->addr, BRK64_OPCODE_KPROBES);
+ void *addr = p->addr;
+ u32 insn = BRK64_OPCODE_KPROBES;
+
+ aarch64_insn_patch_text(&addr, &insn, 1);
}
/* disarm kprobe: remove breakpoint from text */
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
- patch_text(p->addr, p->opcode);
+ void *addr = p->addr;
+
+ aarch64_insn_patch_text(&addr, &p->opcode, 1);
}
void __kprobes arch_remove_kprobe(struct kprobe *p)
@@ -163,20 +159,15 @@
}
/*
- * Interrupts need to be disabled before single-step mode is set, and not
- * reenabled until after single-step mode ends.
- * Without disabling interrupt on local CPU, there is a chance of
- * interrupt occurrence in the period of exception return and start of
- * out-of-line single-step, that result in wrongly single stepping
- * into the interrupt handler.
+ * Mask all of DAIF while executing the instruction out-of-line, to keep things
+ * simple and avoid nesting exceptions. Interrupts do have to be disabled since
+ * the kprobe state is per-CPU and doesn't get migrated.
*/
static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb,
struct pt_regs *regs)
{
kcb->saved_irqflag = regs->pstate & DAIF_MASK;
- regs->pstate |= PSR_I_BIT;
- /* Unmask PSTATE.D for enabling software step exceptions. */
- regs->pstate &= ~PSR_D_BIT;
+ regs->pstate |= DAIF_MASK;
}
static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb,
@@ -219,10 +210,7 @@
slot = (unsigned long)p->ainsn.api.insn;
set_ss_context(kcb, slot); /* mark pending ss */
-
- /* IRQs and single stepping do not mix well. */
kprobes_save_local_irqflag(kcb, regs);
- kernel_enable_single_step(regs);
instruction_pointer_set(regs, slot);
} else {
/* insn simulation */
@@ -273,12 +261,8 @@
}
/* call post handler */
kcb->kprobe_status = KPROBE_HIT_SSDONE;
- if (cur->post_handler) {
- /* post_handler can hit breakpoint and single step
- * again, so we enable D-flag for recursive exception.
- */
+ if (cur->post_handler)
cur->post_handler(cur, regs, 0);
- }
reset_current_kprobe();
}
@@ -302,8 +286,6 @@
if (!instruction_pointer(regs))
BUG();
- kernel_disable_single_step();
-
if (kcb->kprobe_status == KPROBE_REENTER)
restore_previous_kprobe(kcb);
else
@@ -365,10 +347,6 @@
* pre-handler and it returned non-zero, it will
* modify the execution path and no need to single
* stepping. Let's just reset current kprobe and exit.
- *
- * pre_handler can hit a breakpoint and can step thru
- * before return, keep PSTATE D-flag enabled until
- * pre_handler return back.
*/
if (!p->pre_handler || !p->pre_handler(p, regs)) {
setup_singlestep(p, regs, kcb, 0);
@@ -399,7 +377,7 @@
}
static int __kprobes
-kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr)
+kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned int esr)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
int retval;
@@ -409,16 +387,15 @@
if (retval == DBG_HOOK_HANDLED) {
kprobes_restore_local_irqflag(kcb, regs);
- kernel_disable_single_step();
-
post_kprobe_handler(kcb, regs);
}
return retval;
}
-static struct step_hook kprobes_step_hook = {
- .fn = kprobe_single_step_handler,
+static struct break_hook kprobes_break_ss_hook = {
+ .imm = KPROBES_BRK_SS_IMM,
+ .fn = kprobe_breakpoint_ss_handler,
};
static int __kprobes
@@ -486,7 +463,7 @@
int __init arch_init_kprobes(void)
{
register_kernel_break_hook(&kprobes_break_hook);
- register_kernel_step_hook(&kprobes_step_hook);
+ register_kernel_break_hook(&kprobes_break_ss_hook);
return 0;
}
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 4784011..ed919f6 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -72,13 +72,13 @@
void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
-static void __cpu_do_idle(void)
+static void noinstr __cpu_do_idle(void)
{
dsb(sy);
wfi();
}
-static void __cpu_do_idle_irqprio(void)
+static void noinstr __cpu_do_idle_irqprio(void)
{
unsigned long pmr;
unsigned long daif_bits;
@@ -108,7 +108,7 @@
* ensure that interrupts are not masked at the PMR (because the core will
* not wake up if we block the wake up signal in the interrupt controller).
*/
-void cpu_do_idle(void)
+void noinstr cpu_do_idle(void)
{
if (system_uses_irq_prio_masking())
__cpu_do_idle_irqprio();
@@ -119,14 +119,14 @@
/*
* This is our default idle handler.
*/
-void arch_cpu_idle(void)
+void noinstr arch_cpu_idle(void)
{
/*
* This should do all the clock switching and wait for interrupt
* tricks
*/
cpu_do_idle();
- local_irq_enable();
+ raw_local_irq_enable();
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -522,14 +522,13 @@
bool prev32, next32;
u64 val;
- if (!(IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040) &&
- cpus_have_const_cap(ARM64_WORKAROUND_1418040)))
+ if (!IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040))
return;
prev32 = is_compat_thread(task_thread_info(prev));
next32 = is_compat_thread(task_thread_info(next));
- if (prev32 == next32)
+ if (prev32 == next32 || !this_cpu_has_cap(ARM64_WORKAROUND_1418040))
return;
val = read_sysreg(cntkctl_el1);
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
index c18eb7d..f6e4e37 100644
--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -118,6 +118,7 @@
MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
MIDR_ALL_VERSIONS(MIDR_HISI_TSV110),
+ MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_SILVER),
MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
{ /* sentinel */ }
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index 43ae4e0..62d2bda 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -66,7 +66,6 @@
static void cpu_psci_cpu_die(unsigned int cpu)
{
- int ret;
/*
* There are no known implementations of PSCI actually using the
* power state field, pass a sensible default for now.
@@ -74,9 +73,7 @@
u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN <<
PSCI_0_2_POWER_STATE_TYPE_SHIFT;
- ret = psci_ops.cpu_off(state);
-
- pr_crit("unable to power off CPU%u (%d)\n", cpu, ret);
+ psci_ops.cpu_off(state);
}
static int cpu_psci_cpu_kill(unsigned int cpu)
diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c
index 7689f20..793c46d 100644
--- a/arch/arm64/kernel/sdei.c
+++ b/arch/arm64/kernel/sdei.c
@@ -10,6 +10,7 @@
#include <linux/uaccess.h>
#include <asm/alternative.h>
+#include <asm/exception.h>
#include <asm/kprobes.h>
#include <asm/mmu.h>
#include <asm/ptrace.h>
@@ -223,16 +224,16 @@
}
-asmlinkage __kprobes notrace unsigned long
+asmlinkage noinstr unsigned long
__sdei_handler(struct pt_regs *regs, struct sdei_registered_event *arg)
{
unsigned long ret;
- nmi_enter();
+ arm64_enter_nmi(regs);
ret = _sdei_handler(regs, arg);
- nmi_exit();
+ arm64_exit_nmi(regs);
return ret;
}
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 09c96f5..18e9727 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -413,6 +413,7 @@
/* Mark this CPU absent */
set_cpu_present(cpu, 0);
+ rcu_report_dead(cpu);
if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
update_cpu_boot_status(CPU_KILL_ME);
diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index e4c0dad..f8f758e 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -121,7 +121,6 @@
cortex_a76_erratum_1463225_svc_handler();
local_daif_restore(DAIF_PROCCTX);
- user_exit();
if (system_supports_mte() && (flags & _TIF_MTE_ASYNC_FAULT)) {
/*
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 8af4e0e..2059d8f 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -34,6 +34,7 @@
#include <asm/daifflags.h>
#include <asm/debug-monitors.h>
#include <asm/esr.h>
+#include <asm/exception.h>
#include <asm/extable.h>
#include <asm/insn.h>
#include <asm/kprobes.h>
@@ -753,8 +754,10 @@
* bad_mode handles the impossible case in the exception vector. This is always
* fatal.
*/
-asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
+asmlinkage void notrace bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
{
+ arm64_enter_nmi(regs);
+
console_verbose();
pr_crit("Bad mode in %s handler detected on CPU%d, code 0x%08x -- %s\n",
@@ -786,7 +789,7 @@
DEFINE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack)
__aligned(16);
-asmlinkage void handle_bad_stack(struct pt_regs *regs)
+asmlinkage void noinstr handle_bad_stack(struct pt_regs *regs)
{
unsigned long tsk_stk = (unsigned long)current->stack;
unsigned long irq_stk = (unsigned long)this_cpu_read(irq_stack_ptr);
@@ -794,6 +797,8 @@
unsigned int esr = read_sysreg(esr_el1);
unsigned long far = read_sysreg(far_el1);
+ arm64_enter_nmi(regs);
+
console_verbose();
pr_emerg("Insufficient stack space to handle exception!");
@@ -865,24 +870,17 @@
}
}
-asmlinkage void do_serror(struct pt_regs *regs, unsigned int esr)
+asmlinkage void noinstr do_serror(struct pt_regs *regs, unsigned int esr)
{
- nmi_enter();
+ arm64_enter_nmi(regs);
/* non-RAS errors are not containable */
if (!arm64_is_ras_serror(esr) || arm64_is_fatal_ras_serror(regs, esr))
arm64_serror_panic(regs, esr);
- nmi_exit();
+ arm64_exit_nmi(regs);
}
-asmlinkage void enter_from_user_mode(void)
-{
- CT_WARN_ON(ct_state() != CONTEXT_USER);
- user_exit_irqoff();
-}
-NOKPROBE_SYMBOL(enter_from_user_mode);
-
/* GENERIC_BUG traps */
int is_valid_bugaddr(unsigned long addr)
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 5750ec3..c0ffb01 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -102,6 +102,20 @@
return vgic_present ? kvm_vgic_get_max_vcpus() : KVM_MAX_VCPUS;
}
+static void set_default_csv2(struct kvm *kvm)
+{
+ /*
+ * The default is to expose CSV2 == 1 if the HW isn't affected.
+ * Although this is a per-CPU feature, we make it global because
+ * asymmetric systems are just a nuisance.
+ *
+ * Userspace can override this as long as it doesn't promise
+ * the impossible.
+ */
+ if (arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED)
+ kvm->arch.pfr0_csv2 = 1;
+}
+
/**
* kvm_arch_init_vm - initializes a VM data structure
* @kvm: pointer to the KVM struct
@@ -127,6 +141,8 @@
/* The maximum number of VCPUs is limited by the host's GIC model */
kvm->arch.max_vcpus = kvm_arm_default_max_vcpus();
+ set_default_csv2(kvm);
+
return ret;
out_free_stage2_pgd:
kvm_free_stage2_pgd(&kvm->arch.mmu);
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp.lds.S b/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
index bb2d986..a797aba 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
+++ b/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
@@ -13,6 +13,11 @@
SECTIONS {
HYP_SECTION(.text)
+ /*
+ * .hyp..data..percpu needs to be page aligned to maintain the same
+ * alignment for when linking into vmlinux.
+ */
+ . = ALIGN(PAGE_SIZE);
HYP_SECTION_NAME(.data..percpu) : {
PERCPU_INPUT(L1_CACHE_BYTES)
}
diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
index 0271b4a..bdf8e55 100644
--- a/arch/arm64/kvm/hyp/pgtable.c
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -470,6 +470,15 @@
if (!kvm_block_mapping_supported(addr, end, phys, level))
return false;
+ /*
+ * If the PTE was already valid, drop the refcount on the table
+ * early, as it will be bumped-up again in stage2_map_walk_leaf().
+ * This ensures that the refcount stays constant across a valid to
+ * valid PTE update.
+ */
+ if (kvm_pte_valid(*ptep))
+ put_page(virt_to_page(ptep));
+
if (kvm_set_valid_leaf_pte(ptep, phys, data->attr, level))
goto out;
@@ -493,7 +502,13 @@
return 0;
kvm_set_invalid_pte(ptep);
- kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, data->mmu, addr, 0);
+
+ /*
+ * Invalidate the whole stage-2, as we may have numerous leaf
+ * entries below us which would otherwise need invalidating
+ * individually.
+ */
+ kvm_call_hyp(__kvm_tlb_flush_vmid, data->mmu);
data->anchor = ptep;
return 0;
}
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index 57972bd..75814a0 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -754,10 +754,12 @@
gfn_t gfn;
kvm_pfn_t pfn;
bool logging_active = memslot_is_logging(memslot);
- unsigned long vma_pagesize;
+ unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu);
+ unsigned long vma_pagesize, fault_granule;
enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
struct kvm_pgtable *pgt;
+ fault_granule = 1UL << ARM64_HW_PGTABLE_LEVEL_SHIFT(fault_level);
write_fault = kvm_is_write_fault(vcpu);
exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
VM_BUG_ON(write_fault && exec_fault);
@@ -788,10 +790,12 @@
}
switch (vma_shift) {
+#ifndef __PAGETABLE_PMD_FOLDED
case PUD_SHIFT:
if (fault_supports_stage2_huge_mapping(memslot, hva, PUD_SIZE))
break;
fallthrough;
+#endif
case CONT_PMD_SHIFT:
vma_shift = PMD_SHIFT;
fallthrough;
@@ -894,7 +898,12 @@
else if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC))
prot |= KVM_PGTABLE_PROT_X;
- if (fault_status == FSC_PERM && !(logging_active && writable)) {
+ /*
+ * Under the premise of getting a FSC_PERM fault, we just need to relax
+ * permissions only if vma_pagesize equals fault_granule. Otherwise,
+ * kvm_pgtable_stage2_map() should be called to change block size.
+ */
+ if (fault_status == FSC_PERM && vma_pagesize == fault_granule) {
ret = kvm_pgtable_stage2_relax_perms(pgt, fault_ipa, prot);
} else {
ret = kvm_pgtable_stage2_map(pgt, fault_ipa, vma_pagesize,
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index fb12d3e..c1fac98 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1038,8 +1038,8 @@
{ SYS_DESC(SYS_PMEVTYPERn_EL0(n)), \
access_pmu_evtyper, reset_unknown, (PMEVTYPER0_EL0 + n), }
-static bool access_amu(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
- const struct sys_reg_desc *r)
+static bool undef_access(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+ const struct sys_reg_desc *r)
{
kvm_inject_undefined(vcpu);
@@ -1047,33 +1047,25 @@
}
/* Macro to expand the AMU counter and type registers*/
-#define AMU_AMEVCNTR0_EL0(n) { SYS_DESC(SYS_AMEVCNTR0_EL0(n)), access_amu }
-#define AMU_AMEVTYPER0_EL0(n) { SYS_DESC(SYS_AMEVTYPER0_EL0(n)), access_amu }
-#define AMU_AMEVCNTR1_EL0(n) { SYS_DESC(SYS_AMEVCNTR1_EL0(n)), access_amu }
-#define AMU_AMEVTYPER1_EL0(n) { SYS_DESC(SYS_AMEVTYPER1_EL0(n)), access_amu }
-
-static bool trap_ptrauth(struct kvm_vcpu *vcpu,
- struct sys_reg_params *p,
- const struct sys_reg_desc *rd)
-{
- /*
- * If we land here, that is because we didn't fixup the access on exit
- * by allowing the PtrAuth sysregs. The only way this happens is when
- * the guest does not have PtrAuth support enabled.
- */
- kvm_inject_undefined(vcpu);
-
- return false;
-}
+#define AMU_AMEVCNTR0_EL0(n) { SYS_DESC(SYS_AMEVCNTR0_EL0(n)), undef_access }
+#define AMU_AMEVTYPER0_EL0(n) { SYS_DESC(SYS_AMEVTYPER0_EL0(n)), undef_access }
+#define AMU_AMEVCNTR1_EL0(n) { SYS_DESC(SYS_AMEVCNTR1_EL0(n)), undef_access }
+#define AMU_AMEVTYPER1_EL0(n) { SYS_DESC(SYS_AMEVTYPER1_EL0(n)), undef_access }
static unsigned int ptrauth_visibility(const struct kvm_vcpu *vcpu,
const struct sys_reg_desc *rd)
{
- return vcpu_has_ptrauth(vcpu) ? 0 : REG_HIDDEN_USER | REG_HIDDEN_GUEST;
+ return vcpu_has_ptrauth(vcpu) ? 0 : REG_HIDDEN;
}
+/*
+ * If we land here on a PtrAuth access, that is because we didn't
+ * fixup the access on exit by allowing the PtrAuth sysregs. The only
+ * way this happens is when the guest does not have PtrAuth support
+ * enabled.
+ */
#define __PTRAUTH_KEY(k) \
- { SYS_DESC(SYS_## k), trap_ptrauth, reset_unknown, k, \
+ { SYS_DESC(SYS_## k), undef_access, reset_unknown, k, \
.visibility = ptrauth_visibility}
#define PTRAUTH_KEY(k) \
@@ -1128,9 +1120,8 @@
if (!vcpu_has_sve(vcpu))
val &= ~(0xfUL << ID_AA64PFR0_SVE_SHIFT);
val &= ~(0xfUL << ID_AA64PFR0_AMU_SHIFT);
- if (!(val & (0xfUL << ID_AA64PFR0_CSV2_SHIFT)) &&
- arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED)
- val |= (1UL << ID_AA64PFR0_CSV2_SHIFT);
+ val &= ~(0xfUL << ID_AA64PFR0_CSV2_SHIFT);
+ val |= ((u64)vcpu->kvm->arch.pfr0_csv2 << ID_AA64PFR0_CSV2_SHIFT);
} else if (id == SYS_ID_AA64PFR1_EL1) {
val &= ~(0xfUL << ID_AA64PFR1_MTE_SHIFT);
} else if (id == SYS_ID_AA64ISAR1_EL1 && !vcpu_has_ptrauth(vcpu)) {
@@ -1153,6 +1144,22 @@
return val;
}
+static unsigned int id_visibility(const struct kvm_vcpu *vcpu,
+ const struct sys_reg_desc *r)
+{
+ u32 id = sys_reg((u32)r->Op0, (u32)r->Op1,
+ (u32)r->CRn, (u32)r->CRm, (u32)r->Op2);
+
+ switch (id) {
+ case SYS_ID_AA64ZFR0_EL1:
+ if (!vcpu_has_sve(vcpu))
+ return REG_RAZ;
+ break;
+ }
+
+ return 0;
+}
+
/* cpufeature ID register access trap handlers */
static bool __access_id_reg(struct kvm_vcpu *vcpu,
@@ -1171,7 +1178,9 @@
struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
- return __access_id_reg(vcpu, p, r, false);
+ bool raz = sysreg_visible_as_raz(vcpu, r);
+
+ return __access_id_reg(vcpu, p, r, raz);
}
static bool access_raz_id_reg(struct kvm_vcpu *vcpu,
@@ -1192,71 +1201,40 @@
if (vcpu_has_sve(vcpu))
return 0;
- return REG_HIDDEN_USER | REG_HIDDEN_GUEST;
+ return REG_HIDDEN;
}
-/* Visibility overrides for SVE-specific ID registers */
-static unsigned int sve_id_visibility(const struct kvm_vcpu *vcpu,
- const struct sys_reg_desc *rd)
-{
- if (vcpu_has_sve(vcpu))
- return 0;
-
- return REG_HIDDEN_USER;
-}
-
-/* Generate the emulated ID_AA64ZFR0_EL1 value exposed to the guest */
-static u64 guest_id_aa64zfr0_el1(const struct kvm_vcpu *vcpu)
-{
- if (!vcpu_has_sve(vcpu))
- return 0;
-
- return read_sanitised_ftr_reg(SYS_ID_AA64ZFR0_EL1);
-}
-
-static bool access_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
- struct sys_reg_params *p,
- const struct sys_reg_desc *rd)
-{
- if (p->is_write)
- return write_to_read_only(vcpu, p, rd);
-
- p->regval = guest_id_aa64zfr0_el1(vcpu);
- return true;
-}
-
-static int get_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
- const struct sys_reg_desc *rd,
- const struct kvm_one_reg *reg, void __user *uaddr)
-{
- u64 val;
-
- if (WARN_ON(!vcpu_has_sve(vcpu)))
- return -ENOENT;
-
- val = guest_id_aa64zfr0_el1(vcpu);
- return reg_to_user(uaddr, &val, reg->id);
-}
-
-static int set_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
- const struct sys_reg_desc *rd,
- const struct kvm_one_reg *reg, void __user *uaddr)
+static int set_id_aa64pfr0_el1(struct kvm_vcpu *vcpu,
+ const struct sys_reg_desc *rd,
+ const struct kvm_one_reg *reg, void __user *uaddr)
{
const u64 id = sys_reg_to_index(rd);
int err;
u64 val;
-
- if (WARN_ON(!vcpu_has_sve(vcpu)))
- return -ENOENT;
+ u8 csv2;
err = reg_from_user(&val, uaddr, id);
if (err)
return err;
- /* This is what we mean by invariant: you can't change it. */
- if (val != guest_id_aa64zfr0_el1(vcpu))
+ /*
+ * Allow AA64PFR0_EL1.CSV2 to be set from userspace as long as
+ * it doesn't promise more than what is actually provided (the
+ * guest could otherwise be covered in ectoplasmic residue).
+ */
+ csv2 = cpuid_feature_extract_unsigned_field(val, ID_AA64PFR0_CSV2_SHIFT);
+ if (csv2 > 1 ||
+ (csv2 && arm64_get_spectre_v2_state() != SPECTRE_UNAFFECTED))
return -EINVAL;
+ /* We can only differ with CSV2, and anything else is an error */
+ val ^= read_id_reg(vcpu, rd, false);
+ val &= ~(0xFUL << ID_AA64PFR0_CSV2_SHIFT);
+ if (val)
+ return -EINVAL;
+
+ vcpu->kvm->arch.pfr0_csv2 = csv2;
+
return 0;
}
@@ -1299,13 +1277,17 @@
static int get_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
- return __get_id_reg(vcpu, rd, uaddr, false);
+ bool raz = sysreg_visible_as_raz(vcpu, rd);
+
+ return __get_id_reg(vcpu, rd, uaddr, raz);
}
static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
- return __set_id_reg(vcpu, rd, uaddr, false);
+ bool raz = sysreg_visible_as_raz(vcpu, rd);
+
+ return __set_id_reg(vcpu, rd, uaddr, raz);
}
static int get_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
@@ -1384,19 +1366,13 @@
return true;
}
-static bool access_mte_regs(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
- const struct sys_reg_desc *r)
-{
- kvm_inject_undefined(vcpu);
- return false;
-}
-
/* sys_reg_desc initialiser for known cpufeature ID registers */
#define ID_SANITISED(name) { \
SYS_DESC(SYS_##name), \
.access = access_id_reg, \
.get_user = get_id_reg, \
.set_user = set_id_reg, \
+ .visibility = id_visibility, \
}
/*
@@ -1514,11 +1490,12 @@
/* AArch64 ID registers */
/* CRm=4 */
- ID_SANITISED(ID_AA64PFR0_EL1),
+ { SYS_DESC(SYS_ID_AA64PFR0_EL1), .access = access_id_reg,
+ .get_user = get_id_reg, .set_user = set_id_aa64pfr0_el1, },
ID_SANITISED(ID_AA64PFR1_EL1),
ID_UNALLOCATED(4,2),
ID_UNALLOCATED(4,3),
- { SYS_DESC(SYS_ID_AA64ZFR0_EL1), access_id_aa64zfr0_el1, .get_user = get_id_aa64zfr0_el1, .set_user = set_id_aa64zfr0_el1, .visibility = sve_id_visibility },
+ ID_SANITISED(ID_AA64ZFR0_EL1),
ID_UNALLOCATED(4,5),
ID_UNALLOCATED(4,6),
ID_UNALLOCATED(4,7),
@@ -1557,8 +1534,8 @@
{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
- { SYS_DESC(SYS_RGSR_EL1), access_mte_regs },
- { SYS_DESC(SYS_GCR_EL1), access_mte_regs },
+ { SYS_DESC(SYS_RGSR_EL1), undef_access },
+ { SYS_DESC(SYS_GCR_EL1), undef_access },
{ SYS_DESC(SYS_ZCR_EL1), NULL, reset_val, ZCR_EL1, 0, .visibility = sve_visibility },
{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
@@ -1584,8 +1561,8 @@
{ SYS_DESC(SYS_ERXMISC0_EL1), trap_raz_wi },
{ SYS_DESC(SYS_ERXMISC1_EL1), trap_raz_wi },
- { SYS_DESC(SYS_TFSR_EL1), access_mte_regs },
- { SYS_DESC(SYS_TFSRE0_EL1), access_mte_regs },
+ { SYS_DESC(SYS_TFSR_EL1), undef_access },
+ { SYS_DESC(SYS_TFSRE0_EL1), undef_access },
{ SYS_DESC(SYS_FAR_EL1), access_vm_reg, reset_unknown, FAR_EL1 },
{ SYS_DESC(SYS_PAR_EL1), NULL, reset_unknown, PAR_EL1 },
@@ -1621,6 +1598,8 @@
{ SYS_DESC(SYS_CONTEXTIDR_EL1), access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
{ SYS_DESC(SYS_TPIDR_EL1), NULL, reset_unknown, TPIDR_EL1 },
+ { SYS_DESC(SYS_SCXTNUM_EL1), undef_access },
+
{ SYS_DESC(SYS_CNTKCTL_EL1), NULL, reset_val, CNTKCTL_EL1, 0},
{ SYS_DESC(SYS_CCSIDR_EL1), access_ccsidr },
@@ -1649,14 +1628,16 @@
{ SYS_DESC(SYS_TPIDR_EL0), NULL, reset_unknown, TPIDR_EL0 },
{ SYS_DESC(SYS_TPIDRRO_EL0), NULL, reset_unknown, TPIDRRO_EL0 },
- { SYS_DESC(SYS_AMCR_EL0), access_amu },
- { SYS_DESC(SYS_AMCFGR_EL0), access_amu },
- { SYS_DESC(SYS_AMCGCR_EL0), access_amu },
- { SYS_DESC(SYS_AMUSERENR_EL0), access_amu },
- { SYS_DESC(SYS_AMCNTENCLR0_EL0), access_amu },
- { SYS_DESC(SYS_AMCNTENSET0_EL0), access_amu },
- { SYS_DESC(SYS_AMCNTENCLR1_EL0), access_amu },
- { SYS_DESC(SYS_AMCNTENSET1_EL0), access_amu },
+ { SYS_DESC(SYS_SCXTNUM_EL0), undef_access },
+
+ { SYS_DESC(SYS_AMCR_EL0), undef_access },
+ { SYS_DESC(SYS_AMCFGR_EL0), undef_access },
+ { SYS_DESC(SYS_AMCGCR_EL0), undef_access },
+ { SYS_DESC(SYS_AMUSERENR_EL0), undef_access },
+ { SYS_DESC(SYS_AMCNTENCLR0_EL0), undef_access },
+ { SYS_DESC(SYS_AMCNTENSET0_EL0), undef_access },
+ { SYS_DESC(SYS_AMCNTENCLR1_EL0), undef_access },
+ { SYS_DESC(SYS_AMCNTENSET1_EL0), undef_access },
AMU_AMEVCNTR0_EL0(0),
AMU_AMEVCNTR0_EL0(1),
AMU_AMEVCNTR0_EL0(2),
@@ -2185,7 +2166,7 @@
trace_kvm_sys_access(*vcpu_pc(vcpu), params, r);
/* Check for regs disabled by runtime config */
- if (sysreg_hidden_from_guest(vcpu, r)) {
+ if (sysreg_hidden(vcpu, r)) {
kvm_inject_undefined(vcpu);
return;
}
@@ -2684,7 +2665,7 @@
return get_invariant_sys_reg(reg->id, uaddr);
/* Check for regs disabled by runtime config */
- if (sysreg_hidden_from_user(vcpu, r))
+ if (sysreg_hidden(vcpu, r))
return -ENOENT;
if (r->get_user)
@@ -2709,7 +2690,7 @@
return set_invariant_sys_reg(reg->id, uaddr);
/* Check for regs disabled by runtime config */
- if (sysreg_hidden_from_user(vcpu, r))
+ if (sysreg_hidden(vcpu, r))
return -ENOENT;
if (r->set_user)
@@ -2780,7 +2761,7 @@
if (!(rd->reg || rd->get_user))
return 0;
- if (sysreg_hidden_from_user(vcpu, rd))
+ if (sysreg_hidden(vcpu, rd))
return 0;
if (!copy_reg_to_user(rd, uind))
diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h
index 5a6fc30..0f95964 100644
--- a/arch/arm64/kvm/sys_regs.h
+++ b/arch/arm64/kvm/sys_regs.h
@@ -59,8 +59,8 @@
const struct sys_reg_desc *rd);
};
-#define REG_HIDDEN_USER (1 << 0) /* hidden from userspace ioctls */
-#define REG_HIDDEN_GUEST (1 << 1) /* hidden from guest */
+#define REG_HIDDEN (1 << 0) /* hidden from userspace and guest */
+#define REG_RAZ (1 << 1) /* RAZ from userspace and guest */
static __printf(2, 3)
inline void print_sys_reg_msg(const struct sys_reg_params *p,
@@ -111,22 +111,22 @@
__vcpu_sys_reg(vcpu, r->reg) = r->val;
}
-static inline bool sysreg_hidden_from_guest(const struct kvm_vcpu *vcpu,
- const struct sys_reg_desc *r)
+static inline bool sysreg_hidden(const struct kvm_vcpu *vcpu,
+ const struct sys_reg_desc *r)
{
if (likely(!r->visibility))
return false;
- return r->visibility(vcpu, r) & REG_HIDDEN_GUEST;
+ return r->visibility(vcpu, r) & REG_HIDDEN;
}
-static inline bool sysreg_hidden_from_user(const struct kvm_vcpu *vcpu,
- const struct sys_reg_desc *r)
+static inline bool sysreg_visible_as_raz(const struct kvm_vcpu *vcpu,
+ const struct sys_reg_desc *r)
{
if (likely(!r->visibility))
return false;
- return r->visibility(vcpu, r) & REG_HIDDEN_USER;
+ return r->visibility(vcpu, r) & REG_RAZ;
}
static inline int cmp_sys_reg(const struct sys_reg_desc *i1,
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
index 52d6f24..15a6c98 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -273,6 +273,23 @@
return extract_bytes(value, addr & 7, len);
}
+static unsigned long vgic_uaccess_read_v3r_typer(struct kvm_vcpu *vcpu,
+ gpa_t addr, unsigned int len)
+{
+ unsigned long mpidr = kvm_vcpu_get_mpidr_aff(vcpu);
+ int target_vcpu_id = vcpu->vcpu_id;
+ u64 value;
+
+ value = (u64)(mpidr & GENMASK(23, 0)) << 32;
+ value |= ((target_vcpu_id & 0xffff) << 8);
+
+ if (vgic_has_its(vcpu->kvm))
+ value |= GICR_TYPER_PLPIS;
+
+ /* reporting of the Last bit is not supported for userspace */
+ return extract_bytes(value, addr & 7, len);
+}
+
static unsigned long vgic_mmio_read_v3r_iidr(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len)
{
@@ -593,8 +610,9 @@
REGISTER_DESC_WITH_LENGTH(GICR_IIDR,
vgic_mmio_read_v3r_iidr, vgic_mmio_write_wi, 4,
VGIC_ACCESS_32bit),
- REGISTER_DESC_WITH_LENGTH(GICR_TYPER,
- vgic_mmio_read_v3r_typer, vgic_mmio_write_wi, 8,
+ REGISTER_DESC_WITH_LENGTH_UACCESS(GICR_TYPER,
+ vgic_mmio_read_v3r_typer, vgic_mmio_write_wi,
+ vgic_uaccess_read_v3r_typer, vgic_mmio_uaccess_write_wi, 8,
VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_LENGTH(GICR_WAKER,
vgic_mmio_read_raz, vgic_mmio_write_wi, 4,
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 1ee9400..795d224 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -789,25 +789,6 @@
*/
static void debug_exception_enter(struct pt_regs *regs)
{
- /*
- * Tell lockdep we disabled irqs in entry.S. Do nothing if they were
- * already disabled to preserve the last enabled/disabled addresses.
- */
- if (interrupts_enabled(regs))
- trace_hardirqs_off();
-
- if (user_mode(regs)) {
- RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
- } else {
- /*
- * We might have interrupted pretty much anything. In
- * fact, if we're a debug exception, we can even interrupt
- * NMI processing. We don't want this code makes in_nmi()
- * to return true, but we need to notify RCU.
- */
- rcu_nmi_enter();
- }
-
preempt_disable();
/* This code is a bit fragile. Test it. */
@@ -818,12 +799,6 @@
static void debug_exception_exit(struct pt_regs *regs)
{
preempt_enable_no_resched();
-
- if (!user_mode(regs))
- rcu_nmi_exit();
-
- if (interrupts_enabled(regs))
- trace_hardirqs_on();
}
NOKPROBE_SYMBOL(debug_exception_exit);
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 1c0f3e0..ca692a8 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -1444,11 +1444,28 @@
free_empty_tables(start, end, PAGE_OFFSET, PAGE_END);
}
+static bool inside_linear_region(u64 start, u64 size)
+{
+ /*
+ * Linear mapping region is the range [PAGE_OFFSET..(PAGE_END - 1)]
+ * accommodating both its ends but excluding PAGE_END. Max physical
+ * range which can be mapped inside this linear mapping range, must
+ * also be derived from its end points.
+ */
+ return start >= __pa(_PAGE_OFFSET(vabits_actual)) &&
+ (start + size - 1) <= __pa(PAGE_END - 1);
+}
+
int arch_add_memory(int nid, u64 start, u64 size,
struct mhp_params *params)
{
int ret, flags = 0;
+ if (!inside_linear_region(start, size)) {
+ pr_err("[%llx %llx] is outside linear mapping region\n", start, start + size);
+ return -EINVAL;
+ }
+
if (rodata_full || debug_pagealloc_enabled())
flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
diff --git a/arch/csky/kernel/perf_regs.c b/arch/csky/kernel/perf_regs.c
index eb32838..09b7f88 100644
--- a/arch/csky/kernel/perf_regs.c
+++ b/arch/csky/kernel/perf_regs.c
@@ -32,8 +32,7 @@
}
void perf_get_regs_user(struct perf_regs *regs_user,
- struct pt_regs *regs,
- struct pt_regs *regs_user_copy)
+ struct pt_regs *regs)
{
regs_user->regs = task_pt_regs(current);
regs_user->abi = perf_reg_abi(current);
diff --git a/arch/csky/kernel/process.c b/arch/csky/kernel/process.c
index f730869..69af6bc8 100644
--- a/arch/csky/kernel/process.c
+++ b/arch/csky/kernel/process.c
@@ -102,6 +102,6 @@
#ifdef CONFIG_CPU_PM_STOP
asm volatile("stop\n");
#endif
- local_irq_enable();
+ raw_local_irq_enable();
}
#endif
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index aea0a40..bc1364d 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -57,7 +57,7 @@
*/
void arch_cpu_idle(void)
{
- local_irq_enable();
+ raw_local_irq_enable();
__asm__("sleep");
}
diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c
index 5a0a95d..67767c5 100644
--- a/arch/hexagon/kernel/process.c
+++ b/arch/hexagon/kernel/process.c
@@ -44,7 +44,7 @@
{
__vmwait();
/* interrupts wake us up, but irqs are still disabled */
- local_irq_enable();
+ raw_local_irq_enable();
}
/*
diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
index 336d057..dd8c166 100644
--- a/arch/ia64/include/asm/sparsemem.h
+++ b/arch/ia64/include/asm/sparsemem.h
@@ -18,4 +18,10 @@
#endif
#endif /* CONFIG_SPARSEMEM */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int memory_add_physaddr_to_nid(u64 addr);
+#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
+#endif
+
#endif /* _ASM_IA64_SPARSEMEM_H */
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 6b61a70..c9ff879 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -239,7 +239,7 @@
if (mark_idle)
(*mark_idle)(1);
- safe_halt();
+ raw_safe_halt();
if (mark_idle)
(*mark_idle)(0);
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index a9e46e5..f998607 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -149,5 +149,5 @@
void arch_cpu_idle(void)
{
- local_irq_enable();
+ raw_local_irq_enable();
}
diff --git a/arch/mips/alchemy/common/clock.c b/arch/mips/alchemy/common/clock.c
index a95a894..f0c8303 100644
--- a/arch/mips/alchemy/common/clock.c
+++ b/arch/mips/alchemy/common/clock.c
@@ -152,6 +152,7 @@
{
struct clk_init_data id;
struct clk_hw *h;
+ struct clk *clk;
h = kzalloc(sizeof(*h), GFP_KERNEL);
if (!h)
@@ -164,7 +165,13 @@
id.ops = &alchemy_clkops_cpu;
h->init = &id;
- return clk_register(NULL, h);
+ clk = clk_register(NULL, h);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register clock\n");
+ kfree(h);
+ }
+
+ return clk;
}
/* AUXPLLs ************************************************************/
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
index a950fc1..6c0532d 100644
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -154,6 +154,7 @@
#if defined(CONFIG_XPA)
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
#define pte_pfn(x) (((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
static inline pte_t
pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -169,6 +170,7 @@
#elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -183,6 +185,7 @@
#else
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
#ifdef CONFIG_CPU_VR41XX
#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 5bc3b04..18e69eb 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -33,19 +33,19 @@
{
unsigned long cfg = read_c0_conf();
write_c0_conf(cfg | R30XX_CONF_HALT);
- local_irq_enable();
+ raw_local_irq_enable();
}
static void __cpuidle r39xx_wait(void)
{
if (!need_resched())
write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
- local_irq_enable();
+ raw_local_irq_enable();
}
void __cpuidle r4k_wait(void)
{
- local_irq_enable();
+ raw_local_irq_enable();
__r4k_wait();
}
@@ -64,7 +64,7 @@
" .set arch=r4000 \n"
" wait \n"
" .set pop \n");
- local_irq_enable();
+ raw_local_irq_enable();
}
/*
@@ -84,7 +84,7 @@
" wait \n"
" mtc0 $1, $12 # stalls until W stage \n"
" .set pop \n");
- local_irq_enable();
+ raw_local_irq_enable();
}
/*
@@ -257,7 +257,7 @@
if (cpu_wait)
cpu_wait();
else
- local_irq_enable();
+ raw_local_irq_enable();
}
#ifdef CONFIG_CPU_IDLE
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 0d42532..ca579de 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -262,8 +262,8 @@
static void __init bootmem_init(void)
{
phys_addr_t ramstart, ramend;
- phys_addr_t start, end;
- u64 i;
+ unsigned long start, end;
+ int i;
ramstart = memblock_start_of_DRAM();
ramend = memblock_end_of_DRAM();
@@ -300,7 +300,7 @@
min_low_pfn = ARCH_PFN_OFFSET;
max_pfn = PFN_DOWN(ramend);
- for_each_mem_range(i, &start, &end) {
+ for_each_mem_pfn_range(i, MAX_NUMNODES, &start, &end, NULL) {
/*
* Skip highmem here so we get an accurate max_low_pfn if low
* memory stops short of high memory.
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 38e2894..1b939ab 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -438,6 +438,7 @@
}
return mask == PM_HUGE_MASK;
}
+EXPORT_SYMBOL(has_transparent_hugepage);
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/arch/nios2/kernel/process.c b/arch/nios2/kernel/process.c
index 4ffe857..50b4eb1 100644
--- a/arch/nios2/kernel/process.c
+++ b/arch/nios2/kernel/process.c
@@ -33,7 +33,7 @@
void arch_cpu_idle(void)
{
- local_irq_enable();
+ raw_local_irq_enable();
}
/*
diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
index 0ff391f..3c98728 100644
--- a/arch/openrisc/kernel/process.c
+++ b/arch/openrisc/kernel/process.c
@@ -79,7 +79,7 @@
*/
void arch_cpu_idle(void)
{
- local_irq_enable();
+ raw_local_irq_enable();
if (mfspr(SPR_UPR) & SPR_UPR_PMP)
mtspr(SPR_PMR, mfspr(SPR_PMR) | SPR_PMR_DME);
}
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index f196d96..a92a23d6a 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -169,7 +169,7 @@
void __cpuidle arch_cpu_idle(void)
{
- local_irq_enable();
+ raw_local_irq_enable();
/* nop on real hardware, qemu will idle sleep. */
asm volatile("or %%r10,%%r10,%%r10\n":::);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e9f13fe..5181872 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -152,6 +152,7 @@
select ARCH_USE_QUEUED_SPINLOCKS if PPC_QUEUED_SPINLOCKS
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
+ select ARCH_WANT_LD_ORPHAN_WARN
select ARCH_WEAK_RELEASE_ACQUIRE
select BINFMT_ELF
select BUILDTIME_TABLE_SORT
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index a4d56f0..5c8c062 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -123,7 +123,6 @@
LDFLAGS_vmlinux-y := -Bstatic
LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie
LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y)
-LDFLAGS_vmlinux += $(call ld-option,--orphan-handling=warn)
ifdef CONFIG_PPC64
ifeq ($(call cc-option-yn,-mcmodel=medium),y)
@@ -248,7 +247,6 @@
cpu-as-$(CONFIG_40x) += -Wa,-m405
cpu-as-$(CONFIG_44x) += -Wa,-m440
cpu-as-$(CONFIG_ALTIVEC) += $(call as-option,-Wa$(comma)-maltivec)
-cpu-as-$(CONFIG_E200) += -Wa,-me200
cpu-as-$(CONFIG_E500) += -Wa,-me500
# When using '-many -mpower4' gas will first try and find a matching power4
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index 36443cd..1376be9 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -36,8 +36,10 @@
*/
#ifdef CONFIG_PTE_64BIT
#define PTE_RPN_MASK (~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
#else
#define PTE_RPN_MASK (~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
#endif
/*
diff --git a/arch/powerpc/include/asm/book3s/64/kup-radix.h b/arch/powerpc/include/asm/book3s/64/kup-radix.h
index 3ee1ec6..a39e2d1 100644
--- a/arch/powerpc/include/asm/book3s/64/kup-radix.h
+++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h
@@ -27,6 +27,7 @@
#endif
.endm
+#ifdef CONFIG_PPC_KUAP
.macro kuap_check_amr gpr1, gpr2
#ifdef CONFIG_PPC_KUAP_DEBUG
BEGIN_MMU_FTR_SECTION_NESTED(67)
@@ -38,6 +39,7 @@
END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67)
#endif
.endm
+#endif
.macro kuap_save_amr_and_lock gpr1, gpr2, use_cr, msr_pr_cr
#ifdef CONFIG_PPC_KUAP
@@ -61,6 +63,10 @@
#else /* !__ASSEMBLY__ */
+#include <linux/jump_label.h>
+
+DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
+
#ifdef CONFIG_PPC_KUAP
#include <asm/mmu.h>
@@ -103,8 +109,16 @@
static inline unsigned long get_kuap(void)
{
+ /*
+ * We return AMR_KUAP_BLOCKED when we don't support KUAP because
+ * prevent_user_access_return needs to return AMR_KUAP_BLOCKED to
+ * cause restore_user_access to do a flush.
+ *
+ * This has no effect in terms of actually blocking things on hash,
+ * so it doesn't break anything.
+ */
if (!early_mmu_has_feature(MMU_FTR_RADIX_KUAP))
- return 0;
+ return AMR_KUAP_BLOCKED;
return mfspr(SPRN_AMR);
}
@@ -123,6 +137,29 @@
isync();
}
+static inline bool
+bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
+{
+ return WARN(mmu_has_feature(MMU_FTR_RADIX_KUAP) &&
+ (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)),
+ "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read");
+}
+#else /* CONFIG_PPC_KUAP */
+static inline void kuap_restore_amr(struct pt_regs *regs, unsigned long amr) { }
+
+static inline unsigned long kuap_get_and_check_amr(void)
+{
+ return 0UL;
+}
+
+static inline unsigned long get_kuap(void)
+{
+ return AMR_KUAP_BLOCKED;
+}
+
+static inline void set_kuap(unsigned long value) { }
+#endif /* !CONFIG_PPC_KUAP */
+
static __always_inline void allow_user_access(void __user *to, const void __user *from,
unsigned long size, unsigned long dir)
{
@@ -142,6 +179,8 @@
unsigned long size, unsigned long dir)
{
set_kuap(AMR_KUAP_BLOCKED);
+ if (static_branch_unlikely(&uaccess_flush_key))
+ do_uaccess_flush();
}
static inline unsigned long prevent_user_access_return(void)
@@ -149,6 +188,8 @@
unsigned long flags = get_kuap();
set_kuap(AMR_KUAP_BLOCKED);
+ if (static_branch_unlikely(&uaccess_flush_key))
+ do_uaccess_flush();
return flags;
}
@@ -156,30 +197,9 @@
static inline void restore_user_access(unsigned long flags)
{
set_kuap(flags);
+ if (static_branch_unlikely(&uaccess_flush_key) && flags == AMR_KUAP_BLOCKED)
+ do_uaccess_flush();
}
-
-static inline bool
-bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
-{
- return WARN(mmu_has_feature(MMU_FTR_RADIX_KUAP) &&
- (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)),
- "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read");
-}
-#else /* CONFIG_PPC_KUAP */
-static inline void kuap_restore_amr(struct pt_regs *regs, unsigned long amr)
-{
-}
-
-static inline void kuap_check_amr(void)
-{
-}
-
-static inline unsigned long kuap_get_and_check_amr(void)
-{
- return 0;
-}
-#endif /* CONFIG_PPC_KUAP */
-
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H */
diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index e0b5294..7509184 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -242,6 +242,18 @@
static inline void radix_init_pseries(void) { };
#endif
+#ifdef CONFIG_HOTPLUG_CPU
+#define arch_clear_mm_cpumask_cpu(cpu, mm) \
+ do { \
+ if (cpumask_test_cpu(cpu, mm_cpumask(mm))) { \
+ atomic_dec(&(mm)->context.active_cpus); \
+ cpumask_clear_cpu(cpu, mm_cpumask(mm)); \
+ } \
+ } while (0)
+
+void cleanup_cpu_mmu_context(void);
+#endif
+
static inline int get_user_context(mm_context_t *ctx, unsigned long ea)
{
int index = ea >> MAX_EA_BITS_PER_CONTEXT;
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index ebe95aa..1d32b17 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -57,11 +57,18 @@
nop; \
nop
+#define ENTRY_FLUSH_SLOT \
+ ENTRY_FLUSH_FIXUP_SECTION; \
+ nop; \
+ nop; \
+ nop;
+
/*
* r10 must be free to use, r13 must be paca
*/
#define INTERRUPT_TO_KERNEL \
- STF_ENTRY_BARRIER_SLOT
+ STF_ENTRY_BARRIER_SLOT; \
+ ENTRY_FLUSH_SLOT
/*
* Macros for annotating the expected destination of (h)rfid
@@ -137,6 +144,9 @@
RFSCV; \
b rfscv_flush_fallback
+#else /* __ASSEMBLY__ */
+/* Prototype for function defined in exceptions-64s.S */
+void do_uaccess_flush(void);
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_EXCEPTION_H */
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index b0af97a..fbd406c 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -205,6 +205,22 @@
FTR_ENTRY_OFFSET 955b-956b; \
.popsection;
+#define UACCESS_FLUSH_FIXUP_SECTION \
+959: \
+ .pushsection __uaccess_flush_fixup,"a"; \
+ .align 2; \
+960: \
+ FTR_ENTRY_OFFSET 959b-960b; \
+ .popsection;
+
+#define ENTRY_FLUSH_FIXUP_SECTION \
+957: \
+ .pushsection __entry_flush_fixup,"a"; \
+ .align 2; \
+958: \
+ FTR_ENTRY_OFFSET 957b-958b; \
+ .popsection;
+
#define RFI_FLUSH_FIXUP_SECTION \
951: \
.pushsection __rfi_flush_fixup,"a"; \
@@ -237,8 +253,11 @@
#include <linux/types.h>
extern long stf_barrier_fallback;
+extern long entry_flush_fallback;
extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
+extern long __start___uaccess_flush_fixup, __stop___uaccess_flush_fixup;
+extern long __start___entry_flush_fixup, __stop___entry_flush_fixup;
extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
extern long __start__btb_flush_fixup, __stop__btb_flush_fixup;
diff --git a/arch/powerpc/include/asm/kup.h b/arch/powerpc/include/asm/kup.h
index 1d0f7d8..0d93331 100644
--- a/arch/powerpc/include/asm/kup.h
+++ b/arch/powerpc/include/asm/kup.h
@@ -14,7 +14,7 @@
#define KUAP_CURRENT_WRITE 8
#define KUAP_CURRENT (KUAP_CURRENT_READ | KUAP_CURRENT_WRITE)
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
#include <asm/book3s/64/kup-radix.h>
#endif
#ifdef CONFIG_PPC_8xx
@@ -35,6 +35,9 @@
.macro kuap_check current, gpr
.endm
+.macro kuap_check_amr gpr1, gpr2
+.endm
+
#endif
#else /* !__ASSEMBLY__ */
@@ -53,17 +56,28 @@
void setup_kuap(bool disabled);
#else
static inline void setup_kuap(bool disabled) { }
+
+static inline bool
+bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
+{
+ return false;
+}
+
+static inline void kuap_check_amr(void) { }
+
+/*
+ * book3s/64/kup-radix.h defines these functions for the !KUAP case to flush
+ * the L1D cache after user accesses. Only include the empty stubs for other
+ * platforms.
+ */
+#ifndef CONFIG_PPC_BOOK3S_64
static inline void allow_user_access(void __user *to, const void __user *from,
unsigned long size, unsigned long dir) { }
static inline void prevent_user_access(void __user *to, const void __user *from,
unsigned long size, unsigned long dir) { }
static inline unsigned long prevent_user_access_return(void) { return 0UL; }
static inline void restore_user_access(unsigned long flags) { }
-static inline bool
-bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
-{
- return false;
-}
+#endif /* CONFIG_PPC_BOOK3S_64 */
#endif /* CONFIG_PPC_KUAP */
static inline void allow_read_from_user(const void __user *from, unsigned long size)
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index 91c69ff..6cda76b 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -46,5 +46,10 @@
#define __HAVE_ARCH_RESERVED_KERNEL_PAGES
#endif
+#ifdef CONFIG_MEMORY_HOTPLUG
+extern int create_section_mapping(unsigned long start, unsigned long end,
+ int nid, pgprot_t prot);
+#endif
+
#endif /* __KERNEL__ */
#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/powerpc/include/asm/nohash/32/kup-8xx.h b/arch/powerpc/include/asm/nohash/32/kup-8xx.h
index 85ed239..567cdc5 100644
--- a/arch/powerpc/include/asm/nohash/32/kup-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/kup-8xx.h
@@ -63,7 +63,7 @@
static inline bool
bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
{
- return WARN(!((regs->kuap ^ MD_APG_KUAP) & 0xf0000000),
+ return WARN(!((regs->kuap ^ MD_APG_KUAP) & 0xff000000),
"Bug: fault blocked by AP register !");
}
diff --git a/arch/powerpc/include/asm/nohash/32/mmu-8xx.h b/arch/powerpc/include/asm/nohash/32/mmu-8xx.h
index 1d9ac0f..0bd1b14 100644
--- a/arch/powerpc/include/asm/nohash/32/mmu-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/mmu-8xx.h
@@ -33,19 +33,18 @@
* respectively NA for All or X for Supervisor and no access for User.
* Then we use the APG to say whether accesses are according to Page rules or
* "all Supervisor" rules (Access to all)
- * Therefore, we define 2 APG groups. lsb is _PMD_USER
- * 0 => Kernel => 01 (all accesses performed according to page definition)
- * 1 => User => 00 (all accesses performed as supervisor iaw page definition)
- * 2-15 => Not Used
+ * _PAGE_ACCESSED is also managed via APG. When _PAGE_ACCESSED is not set, say
+ * "all User" rules, that will lead to NA for all.
+ * Therefore, we define 4 APG groups. lsb is _PAGE_ACCESSED
+ * 0 => Kernel => 11 (all accesses performed according as user iaw page definition)
+ * 1 => Kernel+Accessed => 01 (all accesses performed according to page definition)
+ * 2 => User => 11 (all accesses performed according as user iaw page definition)
+ * 3 => User+Accessed => 00 (all accesses performed as supervisor iaw page definition) for INIT
+ * => 10 (all accesses performed according to swaped page definition) for KUEP
+ * 4-15 => Not Used
*/
-#define MI_APG_INIT 0x40000000
-
-/*
- * 0 => Kernel => 01 (all accesses performed according to page definition)
- * 1 => User => 10 (all accesses performed according to swaped page definition)
- * 2-15 => Not Used
- */
-#define MI_APG_KUEP 0x60000000
+#define MI_APG_INIT 0xdc000000
+#define MI_APG_KUEP 0xde000000
/* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MI_RPN is written, bits in
@@ -106,25 +105,9 @@
#define MD_Ks 0x80000000 /* Should not be set */
#define MD_Kp 0x40000000 /* Should always be set */
-/*
- * All pages' PP data bits are set to either 000 or 011 or 001, which means
- * respectively RW for Supervisor and no access for User, or RO for
- * Supervisor and no access for user and NA for ALL.
- * Then we use the APG to say whether accesses are according to Page rules or
- * "all Supervisor" rules (Access to all)
- * Therefore, we define 2 APG groups. lsb is _PMD_USER
- * 0 => Kernel => 01 (all accesses performed according to page definition)
- * 1 => User => 00 (all accesses performed as supervisor iaw page definition)
- * 2-15 => Not Used
- */
-#define MD_APG_INIT 0x40000000
-
-/*
- * 0 => No user => 01 (all accesses performed according to page definition)
- * 1 => User => 10 (all accesses performed according to swaped page definition)
- * 2-15 => Not Used
- */
-#define MD_APG_KUAP 0x60000000
+/* See explanation above at the definition of MI_APG_INIT */
+#define MD_APG_INIT 0xdc000000
+#define MD_APG_KUAP 0xde000000
/* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MD_RPN is written, bits in
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index ee2243ba..96522f7 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -153,8 +153,10 @@
*/
#if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
#define PTE_RPN_MASK (~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
#else
#define PTE_RPN_MASK (~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
#endif
/*
diff --git a/arch/powerpc/include/asm/nohash/32/pte-8xx.h b/arch/powerpc/include/asm/nohash/32/pte-8xx.h
index 66f403a..1581204 100644
--- a/arch/powerpc/include/asm/nohash/32/pte-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-8xx.h
@@ -39,9 +39,9 @@
* into the TLB.
*/
#define _PAGE_GUARDED 0x0010 /* Copied to L1 G entry in DTLB */
-#define _PAGE_SPECIAL 0x0020 /* SW entry */
+#define _PAGE_ACCESSED 0x0020 /* Copied to L1 APG 1 entry in I/DTLB */
#define _PAGE_EXEC 0x0040 /* Copied to PP (bit 21) in ITLB */
-#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
+#define _PAGE_SPECIAL 0x0080 /* SW entry */
#define _PAGE_NA 0x0200 /* Supervisor NA, User no access */
#define _PAGE_RO 0x0600 /* Supervisor RO, User no access */
@@ -59,11 +59,12 @@
#define _PMD_PRESENT 0x0001
#define _PMD_PRESENT_MASK _PMD_PRESENT
-#define _PMD_BAD 0x0fd0
+#define _PMD_BAD 0x0f90
#define _PMD_PAGE_MASK 0x000c
#define _PMD_PAGE_8M 0x000c
#define _PMD_PAGE_512K 0x0004
-#define _PMD_USER 0x0020 /* APG 1 */
+#define _PMD_ACCESSED 0x0020 /* APG 1 */
+#define _PMD_USER 0x0040 /* APG 2 */
#define _PTE_NONE_MASK 0
diff --git a/arch/powerpc/include/asm/security_features.h b/arch/powerpc/include/asm/security_features.h
index fbb8fa3..b774a44 100644
--- a/arch/powerpc/include/asm/security_features.h
+++ b/arch/powerpc/include/asm/security_features.h
@@ -86,12 +86,19 @@
// Software required to flush link stack on context switch
#define SEC_FTR_FLUSH_LINK_STACK 0x0000000000001000ull
+// The L1-D cache should be flushed when entering the kernel
+#define SEC_FTR_L1D_FLUSH_ENTRY 0x0000000000004000ull
+
+// The L1-D cache should be flushed after user accesses from the kernel
+#define SEC_FTR_L1D_FLUSH_UACCESS 0x0000000000008000ull
// Features enabled by default
#define SEC_FTR_DEFAULT \
(SEC_FTR_L1D_FLUSH_HV | \
SEC_FTR_L1D_FLUSH_PR | \
SEC_FTR_BNDS_CHK_SPEC_BAR | \
+ SEC_FTR_L1D_FLUSH_ENTRY | \
+ SEC_FTR_L1D_FLUSH_UACCESS | \
SEC_FTR_FAVOUR_SECURITY)
#endif /* _ASM_POWERPC_SECURITY_FEATURES_H */
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index 9efbdde..a466749 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -52,12 +52,16 @@
};
void setup_rfi_flush(enum l1d_flush_type, bool enable);
+void setup_entry_flush(bool enable);
+void setup_uaccess_flush(bool enable);
void do_rfi_flush_fixups(enum l1d_flush_type types);
#ifdef CONFIG_PPC_BARRIER_NOSPEC
void setup_barrier_nospec(void);
#else
static inline void setup_barrier_nospec(void) { };
#endif
+void do_uaccess_flush_fixups(enum l1d_flush_type types);
+void do_entry_flush_fixups(enum l1d_flush_type types);
void do_barrier_nospec_fixups(bool enable);
extern bool barrier_nospec_enabled;
diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
index 1e6fa37..d072866 100644
--- a/arch/powerpc/include/asm/sparsemem.h
+++ b/arch/powerpc/include/asm/sparsemem.h
@@ -13,9 +13,9 @@
#endif /* CONFIG_SPARSEMEM */
#ifdef CONFIG_MEMORY_HOTPLUG
-extern int create_section_mapping(unsigned long start, unsigned long end,
- int nid, pgprot_t prot);
extern int remove_section_mapping(unsigned long start, unsigned long end);
+extern int memory_add_physaddr_to_nid(u64 start);
+#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
#ifdef CONFIG_NUMA
extern int hot_add_scn_to_nid(unsigned long scn_addr);
@@ -26,6 +26,5 @@
}
#endif /* CONFIG_NUMA */
#endif /* CONFIG_MEMORY_HOTPLUG */
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_SPARSEMEM_H */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 8728590..3beeb03 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -6,6 +6,7 @@
struct device;
struct device_node;
+struct drmem_lmb;
#ifdef CONFIG_NUMA
@@ -61,6 +62,9 @@
*/
return (nid < 0) ? 0 : nid;
}
+
+int of_drconf_to_nid_single(struct drmem_lmb *lmb);
+
#else
static inline int early_cpu_to_node(int cpu) { return 0; }
@@ -84,10 +88,12 @@
return 0;
}
-#endif /* CONFIG_NUMA */
+static inline int of_drconf_to_nid_single(struct drmem_lmb *lmb)
+{
+ return first_online_node;
+}
-struct drmem_lmb;
-int of_drconf_to_nid_single(struct drmem_lmb *lmb);
+#endif /* CONFIG_NUMA */
#if defined(CONFIG_NUMA) && defined(CONFIG_PPC_SPLPAR)
extern int find_and_online_cpu_nid(int cpu);
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index ef5bbb7..501c9a7 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -178,7 +178,7 @@
* are no aliasing issues.
*/
#define __put_user_asm_goto(x, addr, label, op) \
- asm volatile goto( \
+ asm_volatile_goto( \
"1: " op "%U1%X1 %0,%1 # put_user\n" \
EX_TABLE(1b, %l2) \
: \
@@ -191,7 +191,7 @@
__put_user_asm_goto(x, ptr, label, "std")
#else /* __powerpc64__ */
#define __put_user_asm2_goto(x, addr, label) \
- asm volatile goto( \
+ asm_volatile_goto( \
"1: stw%X1 %0, %1\n" \
"2: stw%X1 %L0, %L1\n" \
EX_TABLE(1b, %l2) \
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index 6b50bf1..bf32704 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -264,8 +264,9 @@
{
struct pci_io_addr_range *piar;
struct rb_node *n;
+ unsigned long flags;
- spin_lock(&pci_io_addr_cache_root.piar_lock);
+ spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
for (n = rb_first(&pci_io_addr_cache_root.rb_root); n; n = rb_next(n)) {
piar = rb_entry(n, struct pci_io_addr_range, rb_node);
@@ -273,7 +274,7 @@
(piar->flags & IORESOURCE_IO) ? "i/o" : "mem",
&piar->addr_lo, &piar->addr_hi, pci_name(piar->pcidev));
}
- spin_unlock(&pci_io_addr_cache_root.piar_lock);
+ spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
return 0;
}
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index f7d748b..4d01f09 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1000,8 +1000,6 @@
* Vectors for the FWNMI option. Share common code.
*/
TRAMP_REAL_BEGIN(system_reset_fwnmi)
- /* XXX: fwnmi guest could run a nested/PR guest, so why no test? */
- __IKVM_REAL(system_reset)=0
GEN_INT_ENTRY system_reset, virt=0
#endif /* CONFIG_PPC_PSERIES */
@@ -1412,6 +1410,11 @@
* If none is found, do a Linux page fault. Linux page faults can happen in
* kernel mode due to user copy operations of course.
*
+ * KVM: The KVM HDSI handler may perform a load with MSR[DR]=1 in guest
+ * MMU context, which may cause a DSI in the host, which must go to the
+ * KVM handler. MSR[IR] is not enabled, so the real-mode handler will
+ * always be used regardless of AIL setting.
+ *
* - Radix MMU
* The hardware loads from the Linux page table directly, so a fault goes
* immediately to Linux page fault.
@@ -1422,10 +1425,8 @@
IVEC=0x300
IDAR=1
IDSISR=1
-#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_SKIP=1
IKVM_REAL=1
-#endif
INT_DEFINE_END(data_access)
EXC_REAL_BEGIN(data_access, 0x300, 0x80)
@@ -1464,6 +1465,8 @@
* ppc64_bolted_size (first segment). The kernel handler must avoid stomping
* on user-handler data structures.
*
+ * KVM: Same as 0x300, DSLB must test for KVM guest.
+ *
* A dedicated save area EXSLB is used (XXX: but it actually need not be
* these days, we could use EXGEN).
*/
@@ -1472,10 +1475,8 @@
IAREA=PACA_EXSLB
IRECONCILE=0
IDAR=1
-#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
IKVM_SKIP=1
IKVM_REAL=1
-#endif
INT_DEFINE_END(data_access_slb)
EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80)
@@ -2951,15 +2952,8 @@
.endr
blr
-TRAMP_REAL_BEGIN(rfi_flush_fallback)
- SET_SCRATCH0(r13);
- GET_PACA(r13);
- std r1,PACA_EXRFI+EX_R12(r13)
- ld r1,PACAKSAVE(r13)
- std r9,PACA_EXRFI+EX_R9(r13)
- std r10,PACA_EXRFI+EX_R10(r13)
- std r11,PACA_EXRFI+EX_R11(r13)
- mfctr r9
+/* Clobbers r10, r11, ctr */
+.macro L1D_DISPLACEMENT_FLUSH
ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
ld r11,PACA_L1D_FLUSH_SIZE(r13)
srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
@@ -2970,7 +2964,7 @@
sync
/*
- * The load adresses are at staggered offsets within cachelines,
+ * The load addresses are at staggered offsets within cachelines,
* which suits some pipelines better (on others it should not
* hurt).
*/
@@ -2985,7 +2979,30 @@
ld r11,(0x80 + 8)*7(r10)
addi r10,r10,0x80*8
bdnz 1b
+.endm
+TRAMP_REAL_BEGIN(entry_flush_fallback)
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ mfctr r9
+ L1D_DISPLACEMENT_FLUSH
+ mtctr r9
+ ld r9,PACA_EXRFI+EX_R9(r13)
+ ld r10,PACA_EXRFI+EX_R10(r13)
+ ld r11,PACA_EXRFI+EX_R11(r13)
+ blr
+
+TRAMP_REAL_BEGIN(rfi_flush_fallback)
+ SET_SCRATCH0(r13);
+ GET_PACA(r13);
+ std r1,PACA_EXRFI+EX_R12(r13)
+ ld r1,PACAKSAVE(r13)
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ mfctr r9
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
@@ -3003,32 +3020,7 @@
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
mfctr r9
- ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
- ld r11,PACA_L1D_FLUSH_SIZE(r13)
- srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
- mtctr r11
- DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
-
- /* order ld/st prior to dcbt stop all streams with flushing */
- sync
-
- /*
- * The load adresses are at staggered offsets within cachelines,
- * which suits some pipelines better (on others it should not
- * hurt).
- */
-1:
- ld r11,(0x80 + 8)*0(r10)
- ld r11,(0x80 + 8)*1(r10)
- ld r11,(0x80 + 8)*2(r10)
- ld r11,(0x80 + 8)*3(r10)
- ld r11,(0x80 + 8)*4(r10)
- ld r11,(0x80 + 8)*5(r10)
- ld r11,(0x80 + 8)*6(r10)
- ld r11,(0x80 + 8)*7(r10)
- addi r10,r10,0x80*8
- bdnz 1b
-
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
@@ -3079,8 +3071,21 @@
RFSCV
USE_TEXT_SECTION()
- MASKED_INTERRUPT
- MASKED_INTERRUPT hsrr=1
+
+_GLOBAL(do_uaccess_flush)
+ UACCESS_FLUSH_FIXUP_SECTION
+ nop
+ nop
+ nop
+ blr
+ L1D_DISPLACEMENT_FLUSH
+ blr
+_ASM_NOKPROBE_SYMBOL(do_uaccess_flush)
+EXPORT_SYMBOL(do_uaccess_flush)
+
+
+MASKED_INTERRUPT
+MASKED_INTERRUPT hsrr=1
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
kvmppc_skip_interrupt:
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 44c9018..a1ae006 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -284,11 +284,7 @@
rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
lwz r11, 0(r11) /* Get Linux PTE */
-#ifdef CONFIG_SWAP
li r9, _PAGE_PRESENT | _PAGE_ACCESSED
-#else
- li r9, _PAGE_PRESENT
-#endif
andc. r9, r9, r11 /* Check permission */
bne 5f
@@ -369,11 +365,7 @@
rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
lwz r11, 0(r11) /* Get Linux PTE */
-#ifdef CONFIG_SWAP
li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
-#else
- li r9, _PAGE_PRESENT | _PAGE_EXEC
-#endif
andc. r9, r9, r11 /* Check permission */
bne 5f
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 9f359d3..ee0bfeb 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -202,9 +202,7 @@
InstructionTLBMiss:
mtspr SPRN_SPRG_SCRATCH0, r10
-#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) || defined(CONFIG_HUGETLBFS)
mtspr SPRN_SPRG_SCRATCH1, r11
-#endif
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
@@ -224,25 +222,13 @@
3:
mtcr r11
#endif
-#if defined(CONFIG_HUGETLBFS) || !defined(CONFIG_PIN_TLB_TEXT)
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10) /* Get level 1 entry */
mtspr SPRN_MD_TWC, r11
-#else
- lwz r10, (swapper_pg_dir-PAGE_OFFSET)@l(r10) /* Get level 1 entry */
- mtspr SPRN_MI_TWC, r10 /* Set segment attributes */
- mtspr SPRN_MD_TWC, r10
-#endif
mfspr r10, SPRN_MD_TWC
lwz r10, 0(r10) /* Get the pte */
-#if defined(CONFIG_HUGETLBFS) || !defined(CONFIG_PIN_TLB_TEXT)
+ rlwimi r11, r10, 0, _PAGE_GUARDED | _PAGE_ACCESSED
rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K
mtspr SPRN_MI_TWC, r11
-#endif
-#ifdef CONFIG_SWAP
- rlwinm r11, r10, 32-5, _PAGE_PRESENT
- and r11, r11, r10
- rlwimi r10, r11, 0, _PAGE_PRESENT
-#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 20 and 23 must be clear.
* Software indicator bits 22, 24, 25, 26, and 27 must be
@@ -256,9 +242,7 @@
/* Restore registers */
0: mfspr r10, SPRN_SPRG_SCRATCH0
-#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) || defined(CONFIG_HUGETLBFS)
mfspr r11, SPRN_SPRG_SCRATCH1
-#endif
rfi
patch_site 0b, patch__itlbmiss_exit_1
@@ -268,9 +252,7 @@
addi r10, r10, 1
stw r10, (itlb_miss_counter - PAGE_OFFSET)@l(0)
mfspr r10, SPRN_SPRG_SCRATCH0
-#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP)
mfspr r11, SPRN_SPRG_SCRATCH1
-#endif
rfi
#endif
@@ -297,30 +279,16 @@
mfspr r10, SPRN_MD_TWC
lwz r10, 0(r10) /* Get the pte */
- /* Insert the Guarded flag into the TWC from the Linux PTE.
+ /* Insert Guarded and Accessed flags into the TWC from the Linux PTE.
* It is bit 27 of both the Linux PTE and the TWC (at least
* I got that right :-). It will be better when we can put
* this into the Linux pgd/pmd and load it in the operation
* above.
*/
- rlwimi r11, r10, 0, _PAGE_GUARDED
+ rlwimi r11, r10, 0, _PAGE_GUARDED | _PAGE_ACCESSED
rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K
mtspr SPRN_MD_TWC, r11
- /* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set.
- * We also need to know if the insn is a load/store, so:
- * Clear _PAGE_PRESENT and load that which will
- * trap into DTLB Error with store bit set accordinly.
- */
- /* PRESENT=0x1, ACCESSED=0x20
- * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
- * r10 = (r10 & ~PRESENT) | r11;
- */
-#ifdef CONFIG_SWAP
- rlwinm r11, r10, 32-5, _PAGE_PRESENT
- and r11, r11, r10
- rlwimi r10, r11, 0, _PAGE_PRESENT
-#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
@@ -711,7 +679,7 @@
li r9, 4 /* up to 4 pages of 8M */
mtctr r9
lis r9, KERNELBASE@h /* Create vaddr for TLB */
- li r10, MI_PS8MEG | MI_SVALID /* Set 8M byte page */
+ li r10, MI_PS8MEG | _PMD_ACCESSED | MI_SVALID
li r11, MI_BOOTINIT /* Create RPN for address 0 */
1:
mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */
@@ -775,7 +743,7 @@
#ifdef CONFIG_PIN_TLB_TEXT
LOAD_REG_IMMEDIATE(r5, 28 << 8)
LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET)
- LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG)
+ LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG | _PMD_ACCESSED)
LOAD_REG_IMMEDIATE(r8, 0xf0 | _PAGE_RO | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT)
LOAD_REG_ADDR(r9, _sinittext)
li r0, 4
@@ -797,7 +765,7 @@
LOAD_REG_IMMEDIATE(r5, 28 << 8 | MD_TWAM)
#ifdef CONFIG_PIN_TLB_DATA
LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET)
- LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG)
+ LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG | _PMD_ACCESSED)
#ifdef CONFIG_PIN_TLB_IMMR
li r0, 3
#else
@@ -834,7 +802,7 @@
#endif
#ifdef CONFIG_PIN_TLB_IMMR
LOAD_REG_IMMEDIATE(r0, VIRT_IMMR_BASE | MD_EVALID)
- LOAD_REG_IMMEDIATE(r7, MD_SVALID | MD_PS512K | MD_GUARDED)
+ LOAD_REG_IMMEDIATE(r7, MD_SVALID | MD_PS512K | MD_GUARDED | _PMD_ACCESSED)
mfspr r8, SPRN_IMMR
rlwinm r8, r8, 0, 0xfff80000
ori r8, r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | \
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
index 5eb9eed..a0dda2a 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -156,6 +156,7 @@
bl initial_bats
bl load_segment_registers
BEGIN_MMU_FTR_SECTION
+ bl reloc_offset
bl early_hash_table
END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
#if defined(CONFIG_BOOTX_TEXT)
@@ -457,11 +458,7 @@
cmplw 0,r1,r3
#endif
mfspr r2, SPRN_SPRG_PGDIR
-#ifdef CONFIG_SWAP
li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
-#else
- li r1,_PAGE_PRESENT | _PAGE_EXEC
-#endif
#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC)
bgt- 112f
lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
@@ -523,11 +520,7 @@
lis r1, TASK_SIZE@h /* check if kernel address */
cmplw 0,r1,r3
mfspr r2, SPRN_SPRG_PGDIR
-#ifdef CONFIG_SWAP
li r1, _PAGE_PRESENT | _PAGE_ACCESSED
-#else
- li r1, _PAGE_PRESENT
-#endif
bgt- 112f
lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */
@@ -603,11 +596,7 @@
lis r1, TASK_SIZE@h /* check if kernel address */
cmplw 0,r1,r3
mfspr r2, SPRN_SPRG_PGDIR
-#ifdef CONFIG_SWAP
li r1, _PAGE_RW | _PAGE_DIRTY | _PAGE_PRESENT | _PAGE_ACCESSED
-#else
- li r1, _PAGE_RW | _PAGE_DIRTY | _PAGE_PRESENT
-#endif
bgt- 112f
lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */
@@ -932,7 +921,7 @@
ori r6, r6, 3 /* 256kB table */
mtspr SPRN_SDR1, r6
lis r6, early_hash@h
- lis r3, Hash@ha
+ addis r3, r3, Hash@ha
stw r6, Hash@l(r3)
blr
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index ae0e263..1f83553 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -52,9 +52,9 @@
* interrupts enabled, some don't.
*/
if (irqs_disabled())
- local_irq_enable();
+ raw_local_irq_enable();
} else {
- local_irq_enable();
+ raw_local_irq_enable();
/*
* Go into low thread priority and possibly
* low power mode.
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index bb9cab3..74fd47f 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -945,7 +945,13 @@
static enum l1d_flush_type enabled_flush_types;
static void *l1d_flush_fallback_area;
static bool no_rfi_flush;
+static bool no_entry_flush;
+static bool no_uaccess_flush;
bool rfi_flush;
+bool entry_flush;
+bool uaccess_flush;
+DEFINE_STATIC_KEY_FALSE(uaccess_flush_key);
+EXPORT_SYMBOL(uaccess_flush_key);
static int __init handle_no_rfi_flush(char *p)
{
@@ -955,6 +961,22 @@
}
early_param("no_rfi_flush", handle_no_rfi_flush);
+static int __init handle_no_entry_flush(char *p)
+{
+ pr_info("entry-flush: disabled on command line.");
+ no_entry_flush = true;
+ return 0;
+}
+early_param("no_entry_flush", handle_no_entry_flush);
+
+static int __init handle_no_uaccess_flush(char *p)
+{
+ pr_info("uaccess-flush: disabled on command line.");
+ no_uaccess_flush = true;
+ return 0;
+}
+early_param("no_uaccess_flush", handle_no_uaccess_flush);
+
/*
* The RFI flush is not KPTI, but because users will see doco that says to use
* nopti we hijack that option here to also disable the RFI flush.
@@ -986,6 +1008,32 @@
rfi_flush = enable;
}
+void entry_flush_enable(bool enable)
+{
+ if (enable) {
+ do_entry_flush_fixups(enabled_flush_types);
+ on_each_cpu(do_nothing, NULL, 1);
+ } else {
+ do_entry_flush_fixups(L1D_FLUSH_NONE);
+ }
+
+ entry_flush = enable;
+}
+
+void uaccess_flush_enable(bool enable)
+{
+ if (enable) {
+ do_uaccess_flush_fixups(enabled_flush_types);
+ static_branch_enable(&uaccess_flush_key);
+ on_each_cpu(do_nothing, NULL, 1);
+ } else {
+ static_branch_disable(&uaccess_flush_key);
+ do_uaccess_flush_fixups(L1D_FLUSH_NONE);
+ }
+
+ uaccess_flush = enable;
+}
+
static void __ref init_fallback_flush(void)
{
u64 l1d_size, limit;
@@ -1044,10 +1092,28 @@
enabled_flush_types = types;
- if (!no_rfi_flush && !cpu_mitigations_off())
+ if (!cpu_mitigations_off() && !no_rfi_flush)
rfi_flush_enable(enable);
}
+void setup_entry_flush(bool enable)
+{
+ if (cpu_mitigations_off())
+ return;
+
+ if (!no_entry_flush)
+ entry_flush_enable(enable);
+}
+
+void setup_uaccess_flush(bool enable)
+{
+ if (cpu_mitigations_off())
+ return;
+
+ if (!no_uaccess_flush)
+ uaccess_flush_enable(enable);
+}
+
#ifdef CONFIG_DEBUG_FS
static int rfi_flush_set(void *data, u64 val)
{
@@ -1075,9 +1141,63 @@
DEFINE_SIMPLE_ATTRIBUTE(fops_rfi_flush, rfi_flush_get, rfi_flush_set, "%llu\n");
+static int entry_flush_set(void *data, u64 val)
+{
+ bool enable;
+
+ if (val == 1)
+ enable = true;
+ else if (val == 0)
+ enable = false;
+ else
+ return -EINVAL;
+
+ /* Only do anything if we're changing state */
+ if (enable != entry_flush)
+ entry_flush_enable(enable);
+
+ return 0;
+}
+
+static int entry_flush_get(void *data, u64 *val)
+{
+ *val = entry_flush ? 1 : 0;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n");
+
+static int uaccess_flush_set(void *data, u64 val)
+{
+ bool enable;
+
+ if (val == 1)
+ enable = true;
+ else if (val == 0)
+ enable = false;
+ else
+ return -EINVAL;
+
+ /* Only do anything if we're changing state */
+ if (enable != uaccess_flush)
+ uaccess_flush_enable(enable);
+
+ return 0;
+}
+
+static int uaccess_flush_get(void *data, u64 *val)
+{
+ *val = uaccess_flush ? 1 : 0;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_uaccess_flush, uaccess_flush_get, uaccess_flush_set, "%llu\n");
+
static __init int rfi_flush_debugfs_init(void)
{
debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL, &fops_rfi_flush);
+ debugfs_create_file("entry_flush", 0600, powerpc_debugfs_root, NULL, &fops_entry_flush);
+ debugfs_create_file("uaccess_flush", 0600, powerpc_debugfs_root, NULL, &fops_uaccess_flush);
return 0;
}
device_initcall(rfi_flush_debugfs_init);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 3c6b982..8c2857c 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1393,13 +1393,14 @@
/* Activate a secondary processor. */
void start_secondary(void *unused)
{
- unsigned int cpu = smp_processor_id();
+ unsigned int cpu = raw_smp_processor_id();
mmgrab(&init_mm);
current->active_mm = &init_mm;
smp_store_cpu_info(cpu);
set_dec(tb_ticks_per_jiffy);
+ rcu_cpu_starting(cpu);
preempt_disable();
cpu_callin_map[cpu] = 1;
diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
index 8e50818..310bcd7 100644
--- a/arch/powerpc/kernel/syscall_64.c
+++ b/arch/powerpc/kernel/syscall_64.c
@@ -2,7 +2,7 @@
#include <linux/err.h>
#include <asm/asm-prototypes.h>
-#include <asm/book3s/64/kup-radix.h>
+#include <asm/kup.h>
#include <asm/cputime.h>
#include <asm/hw_irq.h>
#include <asm/kprobes.h>
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index e0548b4..6db90cd 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -132,6 +132,20 @@
}
. = ALIGN(8);
+ __uaccess_flush_fixup : AT(ADDR(__uaccess_flush_fixup) - LOAD_OFFSET) {
+ __start___uaccess_flush_fixup = .;
+ *(__uaccess_flush_fixup)
+ __stop___uaccess_flush_fixup = .;
+ }
+
+ . = ALIGN(8);
+ __entry_flush_fixup : AT(ADDR(__entry_flush_fixup) - LOAD_OFFSET) {
+ __start___entry_flush_fixup = .;
+ *(__entry_flush_fixup)
+ __stop___entry_flush_fixup = .;
+ }
+
+ . = ALIGN(8);
__stf_exit_barrier_fixup : AT(ADDR(__stf_exit_barrier_fixup) - LOAD_OFFSET) {
__start___stf_exit_barrier_fixup = .;
*(__stf_exit_barrier_fixup)
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index 85215e7..a0ebc29 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -1214,12 +1214,9 @@
static bool kvmppc_xive_vcpu_id_valid(struct kvmppc_xive *xive, u32 cpu)
{
/* We have a block of xive->nr_servers VPs. We just need to check
- * raw vCPU ids are below the expected limit for this guest's
- * core stride ; kvmppc_pack_vcpu_id() will pack them down to an
- * index that can be safely used to compute a VP id that belongs
- * to the VP block.
+ * packed vCPU ids are below that.
*/
- return cpu < xive->nr_servers * xive->kvm->arch.emul_smt_mode;
+ return kvmppc_pack_vcpu_id(xive->kvm, cpu) < xive->nr_servers;
}
int kvmppc_xive_compute_vp_id(struct kvmppc_xive *xive, u32 cpu, u32 *vp)
diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
index d0c2db0..a59a94f 100644
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -251,6 +251,13 @@
}
state = &sb->irq_state[src];
+
+ /* Some sanity checking */
+ if (!state->valid) {
+ pr_devel("%s: source %lx invalid !\n", __func__, irq);
+ return VM_FAULT_SIGBUS;
+ }
+
kvmppc_xive_select_irq(state, &hw_num, &xd);
arch_spin_lock(&sb->lock);
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 4c0a7ee..321c12a 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -234,6 +234,110 @@
do_stf_exit_barrier_fixups(types);
}
+void do_uaccess_flush_fixups(enum l1d_flush_type types)
+{
+ unsigned int instrs[4], *dest;
+ long *start, *end;
+ int i;
+
+ start = PTRRELOC(&__start___uaccess_flush_fixup);
+ end = PTRRELOC(&__stop___uaccess_flush_fixup);
+
+ instrs[0] = 0x60000000; /* nop */
+ instrs[1] = 0x60000000; /* nop */
+ instrs[2] = 0x60000000; /* nop */
+ instrs[3] = 0x4e800020; /* blr */
+
+ i = 0;
+ if (types == L1D_FLUSH_FALLBACK) {
+ instrs[3] = 0x60000000; /* nop */
+ /* fallthrough to fallback flush */
+ }
+
+ if (types & L1D_FLUSH_ORI) {
+ instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
+ instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/
+ }
+
+ if (types & L1D_FLUSH_MTTRIG)
+ instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */
+
+ for (i = 0; start < end; start++, i++) {
+ dest = (void *)start + *start;
+
+ pr_devel("patching dest %lx\n", (unsigned long)dest);
+
+ patch_instruction((struct ppc_inst *)dest, ppc_inst(instrs[0]));
+
+ patch_instruction((struct ppc_inst *)(dest + 1), ppc_inst(instrs[1]));
+ patch_instruction((struct ppc_inst *)(dest + 2), ppc_inst(instrs[2]));
+ patch_instruction((struct ppc_inst *)(dest + 3), ppc_inst(instrs[3]));
+ }
+
+ printk(KERN_DEBUG "uaccess-flush: patched %d locations (%s flush)\n", i,
+ (types == L1D_FLUSH_NONE) ? "no" :
+ (types == L1D_FLUSH_FALLBACK) ? "fallback displacement" :
+ (types & L1D_FLUSH_ORI) ? (types & L1D_FLUSH_MTTRIG)
+ ? "ori+mttrig type"
+ : "ori type" :
+ (types & L1D_FLUSH_MTTRIG) ? "mttrig type"
+ : "unknown");
+}
+
+void do_entry_flush_fixups(enum l1d_flush_type types)
+{
+ unsigned int instrs[3], *dest;
+ long *start, *end;
+ int i;
+
+ start = PTRRELOC(&__start___entry_flush_fixup);
+ end = PTRRELOC(&__stop___entry_flush_fixup);
+
+ instrs[0] = 0x60000000; /* nop */
+ instrs[1] = 0x60000000; /* nop */
+ instrs[2] = 0x60000000; /* nop */
+
+ i = 0;
+ if (types == L1D_FLUSH_FALLBACK) {
+ instrs[i++] = 0x7d4802a6; /* mflr r10 */
+ instrs[i++] = 0x60000000; /* branch patched below */
+ instrs[i++] = 0x7d4803a6; /* mtlr r10 */
+ }
+
+ if (types & L1D_FLUSH_ORI) {
+ instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
+ instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/
+ }
+
+ if (types & L1D_FLUSH_MTTRIG)
+ instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */
+
+ for (i = 0; start < end; start++, i++) {
+ dest = (void *)start + *start;
+
+ pr_devel("patching dest %lx\n", (unsigned long)dest);
+
+ patch_instruction((struct ppc_inst *)dest, ppc_inst(instrs[0]));
+
+ if (types == L1D_FLUSH_FALLBACK)
+ patch_branch((struct ppc_inst *)(dest + 1), (unsigned long)&entry_flush_fallback,
+ BRANCH_SET_LINK);
+ else
+ patch_instruction((struct ppc_inst *)(dest + 1), ppc_inst(instrs[1]));
+
+ patch_instruction((struct ppc_inst *)(dest + 2), ppc_inst(instrs[2]));
+ }
+
+ printk(KERN_DEBUG "entry-flush: patched %d locations (%s flush)\n", i,
+ (types == L1D_FLUSH_NONE) ? "no" :
+ (types == L1D_FLUSH_FALLBACK) ? "fallback displacement" :
+ (types & L1D_FLUSH_ORI) ? (types & L1D_FLUSH_MTTRIG)
+ ? "ori+mttrig type"
+ : "ori type" :
+ (types & L1D_FLUSH_MTTRIG) ? "mttrig type"
+ : "unknown");
+}
+
void do_rfi_flush_fixups(enum l1d_flush_type types)
{
unsigned int instrs[3], *dest;
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 5e14798..55b4a8b 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -5,7 +5,7 @@
ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
-obj-y := fault.o mem.o pgtable.o mmap.o \
+obj-y := fault.o mem.o pgtable.o mmap.o maccess.o \
init_$(BITS).o pgtable_$(BITS).o \
pgtable-frag.o ioremap.o ioremap_$(BITS).o \
init-common.o mmu_context.o drmem.o
diff --git a/arch/powerpc/mm/book3s64/hash_native.c b/arch/powerpc/mm/book3s64/hash_native.c
index 0203cdf..52e170b 100644
--- a/arch/powerpc/mm/book3s64/hash_native.c
+++ b/arch/powerpc/mm/book3s64/hash_native.c
@@ -68,7 +68,7 @@
rs = ((unsigned long)pid << PPC_BITLSHIFT(31));
asm volatile(PPC_TLBIEL(%0, %1, %2, %3, %4)
- : : "r"(rb), "r"(rs), "i"(ric), "i"(prs), "r"(r)
+ : : "r"(rb), "r"(rs), "i"(ric), "i"(prs), "i"(r)
: "memory");
}
@@ -92,16 +92,15 @@
asm volatile("ptesync": : :"memory");
/*
- * Flush the first set of the TLB, and any caching of partition table
- * entries. Then flush the remaining sets of the TLB. Hash mode uses
- * partition scoped TLB translations.
+ * Flush the partition table cache if this is HV mode.
*/
- tlbiel_hash_set_isa300(0, is, 0, 2, 0);
- for (set = 1; set < num_sets; set++)
- tlbiel_hash_set_isa300(set, is, 0, 0, 0);
+ if (early_cpu_has_feature(CPU_FTR_HVMODE))
+ tlbiel_hash_set_isa300(0, is, 0, 2, 0);
/*
- * Now invalidate the process table cache.
+ * Now invalidate the process table cache. UPRT=0 HPT modes (what
+ * current hardware implements) do not use the process table, but
+ * add the flushes anyway.
*
* From ISA v3.0B p. 1078:
* The following forms are invalid.
@@ -110,6 +109,14 @@
*/
tlbiel_hash_set_isa300(0, is, 0, 2, 1);
+ /*
+ * Then flush the sets of the TLB proper. Hash mode uses
+ * partition scoped TLB translations, which may be flushed
+ * in !HV mode.
+ */
+ for (set = 0; set < num_sets; set++)
+ tlbiel_hash_set_isa300(set, is, 0, 0, 0);
+
ppc_after_tlbiel_barrier();
asm volatile(PPC_ISA_3_0_INVALIDATE_ERAT "; isync" : : :"memory");
diff --git a/arch/powerpc/mm/book3s64/mmu_context.c b/arch/powerpc/mm/book3s64/mmu_context.c
index 1c54821d..0c85572 100644
--- a/arch/powerpc/mm/book3s64/mmu_context.c
+++ b/arch/powerpc/mm/book3s64/mmu_context.c
@@ -17,6 +17,7 @@
#include <linux/export.h>
#include <linux/gfp.h>
#include <linux/slab.h>
+#include <linux/cpu.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
@@ -307,3 +308,22 @@
isync();
}
#endif
+
+/**
+ * cleanup_cpu_mmu_context - Clean up MMU details for this CPU (newly offlined)
+ *
+ * This clears the CPU from mm_cpumask for all processes, and then flushes the
+ * local TLB to ensure TLB coherency in case the CPU is onlined again.
+ *
+ * KVM guest translations are not necessarily flushed here. If KVM started
+ * using mm_cpumask or the Linux APIs which do, this would have to be resolved.
+ */
+#ifdef CONFIG_HOTPLUG_CPU
+void cleanup_cpu_mmu_context(void)
+{
+ int cpu = smp_processor_id();
+
+ clear_tasks_mm_cpumask(cpu);
+ tlbiel_all();
+}
+#endif
diff --git a/arch/powerpc/mm/maccess.c b/arch/powerpc/mm/maccess.c
new file mode 100644
index 0000000..fa9a7a7
--- /dev/null
+++ b/arch/powerpc/mm/maccess.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+
+bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
+{
+ return is_kernel_addr((unsigned long)unsafe_src);
+}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 01ec2a2..3fc325b 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -50,6 +50,7 @@
#include <asm/rtas.h>
#include <asm/kasan.h>
#include <asm/svm.h>
+#include <asm/mmzone.h>
#include <mm/mmu_decl.h>
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 63f61d8..f2bf98b 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -742,8 +742,7 @@
of_node_put(cpu);
}
- if (likely(nid > 0))
- node_set_online(nid);
+ node_set_online(nid);
}
get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index 9ed4fcc..7b25548 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -1336,7 +1336,7 @@
/* If this is a valid record, create the sample */
struct perf_output_handle handle;
- if (perf_output_begin(&handle, event, header.size))
+ if (perf_output_begin(&handle, &data, event, header.size))
return;
perf_output_sample(&handle, &header, &data, event);
diff --git a/arch/powerpc/perf/perf_regs.c b/arch/powerpc/perf/perf_regs.c
index 8e53f2f..6f681b1 100644
--- a/arch/powerpc/perf/perf_regs.c
+++ b/arch/powerpc/perf/perf_regs.c
@@ -144,8 +144,7 @@
}
void perf_get_regs_user(struct perf_regs *regs_user,
- struct pt_regs *regs,
- struct pt_regs *regs_user_copy)
+ struct pt_regs *regs)
{
regs_user->regs = task_pt_regs(current);
regs_user->abi = (regs_user->regs) ? perf_reg_abi(current) :
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 74ebe66..adae2a6 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -911,6 +911,8 @@
mpic_cpu_set_priority(0xf);
+ cleanup_cpu_mmu_context();
+
return 0;
}
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 9acaa0f..4426a10 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -98,7 +98,7 @@
security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR);
}
-static void pnv_setup_rfi_flush(void)
+static void pnv_setup_security_mitigations(void)
{
struct device_node *np, *fw_features;
enum l1d_flush_type type;
@@ -122,12 +122,31 @@
type = L1D_FLUSH_ORI;
}
+ /*
+ * If we are non-Power9 bare metal, we don't need to flush on kernel
+ * entry or after user access: they fix a P9 specific vulnerability.
+ */
+ if (!pvr_version_is(PVR_POWER9)) {
+ security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
+ security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS);
+ }
+
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
(security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || \
security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV));
setup_rfi_flush(type, enable);
setup_count_cache_flush();
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
+ setup_entry_flush(enable);
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+ setup_uaccess_flush(enable);
+
+ setup_stf_barrier();
}
static void __init pnv_check_guarded_cores(void)
@@ -156,8 +175,7 @@
{
set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
- pnv_setup_rfi_flush();
- setup_stf_barrier();
+ pnv_setup_security_mitigations();
/* Initialize SMP */
pnv_smp_init();
@@ -193,11 +211,16 @@
add_preferred_console("hvc", 0, NULL);
if (!radix_enabled()) {
+ size_t size = sizeof(struct slb_entry) * mmu_slb_size;
int i;
/* Allocate per cpu area to save old slb contents during MCE */
- for_each_possible_cpu(i)
- paca_ptrs[i]->mce_faulty_slbs = memblock_alloc_node(mmu_slb_size, __alignof__(*paca_ptrs[i]->mce_faulty_slbs), cpu_to_node(i));
+ for_each_possible_cpu(i) {
+ paca_ptrs[i]->mce_faulty_slbs =
+ memblock_alloc_node(size,
+ __alignof__(struct slb_entry),
+ cpu_to_node(i));
+ }
}
}
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 54c4ba4..cbb6781 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -143,6 +143,9 @@
xive_smp_disable_cpu();
else
xics_migrate_irqs_away();
+
+ cleanup_cpu_mmu_context();
+
return 0;
}
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index f2837e3..a02012f 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -90,6 +90,9 @@
xive_smp_disable_cpu();
else
xics_migrate_irqs_away();
+
+ cleanup_cpu_mmu_context();
+
return 0;
}
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index d6f4162..2f73cb5 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -349,8 +349,8 @@
cpus_read_unlock();
- /* Possibly switch to a new RFI flush type */
- pseries_setup_rfi_flush();
+ /* Possibly switch to a new L1 flush type */
+ pseries_setup_security_mitigations();
/* Reinitialise system information for hv-24x7 */
read_24x7_sys_info();
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 133f6ad..b3ac245 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -458,7 +458,8 @@
return hwirq;
}
- virq = irq_create_mapping(NULL, hwirq);
+ virq = irq_create_mapping_affinity(NULL, hwirq,
+ entry->affinity);
if (!virq) {
pr_debug("rtas_msi: Failed mapping hwirq %d\n", hwirq);
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 13fa370a..5938408 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -111,7 +111,7 @@
int dlpar_workqueue_init(void);
-void pseries_setup_rfi_flush(void);
+void pseries_setup_security_mitigations(void);
void pseries_lpar_read_hblkrm_characteristics(void);
#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 633c45e..090c13f 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -542,7 +542,7 @@
security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR);
}
-void pseries_setup_rfi_flush(void)
+void pseries_setup_security_mitigations(void)
{
struct h_cpu_char_result result;
enum l1d_flush_type types;
@@ -579,6 +579,16 @@
setup_rfi_flush(types, enable);
setup_count_cache_flush();
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
+ setup_entry_flush(enable);
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+ setup_uaccess_flush(enable);
+
+ setup_stf_barrier();
}
#ifdef CONFIG_PCI_IOV
@@ -768,8 +778,7 @@
fwnmi_init();
- pseries_setup_rfi_flush();
- setup_stf_barrier();
+ pseries_setup_security_mitigations();
pseries_lpar_read_hblkrm_characteristics();
/* By default, only probe PCI (can be overridden by rtas_pci) */
diff --git a/arch/riscv/include/asm/pgtable-32.h b/arch/riscv/include/asm/pgtable-32.h
index b0ab66e..5b2e79e 100644
--- a/arch/riscv/include/asm/pgtable-32.h
+++ b/arch/riscv/include/asm/pgtable-32.h
@@ -14,4 +14,6 @@
#define PGDIR_SIZE (_AC(1, UL) << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 34
+
#endif /* _ASM_RISCV_PGTABLE_32_H */
diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index ab10490..81de51e 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -60,6 +60,8 @@
}
#define get_cycles_hi get_cycles_hi
+#endif /* !CONFIG_RISCV_M_MODE */
+
#ifdef CONFIG_64BIT
static inline u64 get_cycles64(void)
{
@@ -79,8 +81,6 @@
}
#endif /* CONFIG_64BIT */
-#endif /* !CONFIG_RISCV_M_MODE */
-
#define ARCH_HAS_READ_CURRENT_TIMER
static inline int read_current_timer(unsigned long *timer_val)
{
diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h
index c47e6b3..824b2c9 100644
--- a/arch/riscv/include/asm/uaccess.h
+++ b/arch/riscv/include/asm/uaccess.h
@@ -476,7 +476,7 @@
do { \
long __kr_err; \
\
- __put_user_nocheck(*((type *)(dst)), (type *)(src), __kr_err); \
+ __put_user_nocheck(*((type *)(src)), (type *)(dst), __kr_err); \
if (unlikely(__kr_err)) \
goto err_label; \
} while (0)
diff --git a/arch/riscv/include/asm/vdso/processor.h b/arch/riscv/include/asm/vdso/processor.h
index 82a5693..134388c 100644
--- a/arch/riscv/include/asm/vdso/processor.h
+++ b/arch/riscv/include/asm/vdso/processor.h
@@ -4,6 +4,8 @@
#ifndef __ASSEMBLY__
+#include <asm/barrier.h>
+
static inline void cpu_relax(void)
{
#ifdef __riscv_muldiv
diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
index 99e12fa..765b624 100644
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2013 Linaro Limited
* Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 11e2a4f..7e84979 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -35,6 +35,10 @@
.word 0
#endif
.balign 8
+#ifdef CONFIG_RISCV_M_MODE
+ /* Image load offset (0MB) from start of RAM for M-mode */
+ .dword 0
+#else
#if __riscv_xlen == 64
/* Image load offset(2MB) from start of RAM */
.dword 0x200000
@@ -42,6 +46,7 @@
/* Image load offset(4MB) from start of RAM */
.dword 0x400000
#endif
+#endif
/* Effective size of kernel image */
.dword _end - _start
.dword __HEAD_FLAGS
diff --git a/arch/riscv/kernel/perf_regs.c b/arch/riscv/kernel/perf_regs.c
index 04a38fb..fd304a2 100644
--- a/arch/riscv/kernel/perf_regs.c
+++ b/arch/riscv/kernel/perf_regs.c
@@ -36,8 +36,7 @@
}
void perf_get_regs_user(struct perf_regs *regs_user,
- struct pt_regs *regs,
- struct pt_regs *regs_user_copy)
+ struct pt_regs *regs)
{
regs_user->regs = task_pt_regs(current);
regs_user->abi = perf_reg_abi(current);
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index 19225ec..dd5f985 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -36,7 +36,7 @@
void arch_cpu_idle(void)
{
wait_for_interrupt();
- local_irq_enable();
+ raw_local_irq_enable();
}
void show_regs(struct pt_regs *regs)
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index c424cc6..117f321 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -75,6 +75,7 @@
*cmdline_p = boot_command_line;
early_ioremap_setup();
+ jump_label_init();
parse_early_param();
efi_init();
diff --git a/arch/riscv/kernel/vdso/.gitignore b/arch/riscv/kernel/vdso/.gitignore
index 11ebee9..3a19def 100644
--- a/arch/riscv/kernel/vdso/.gitignore
+++ b/arch/riscv/kernel/vdso/.gitignore
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
vdso.lds
*.tmp
+vdso-syms.S
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 7d6a94d..0cfd6da 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -43,19 +43,14 @@
SYSCFLAGS_vdso.so.dbg = $(c_flags)
$(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
$(call if_changed,vdsold)
+SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
+ -Wl,--build-id=sha1 -Wl,--hash-style=both
# We also create a special relocatable object that should mirror the symbol
# table and layout of the linked DSO. With ld --just-symbols we can then
# refer to these symbols in the kernel code rather than hand-coded addresses.
-
-SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
- -Wl,--build-id=sha1 -Wl,--hash-style=both
-$(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE
- $(call if_changed,vdsold)
-
-LDFLAGS_vdso-syms.o := -r --just-symbols
-$(obj)/vdso-syms.o: $(obj)/vdso-dummy.o FORCE
- $(call if_changed,ld)
+$(obj)/vdso-syms.S: $(obj)/vdso.so FORCE
+ $(call if_changed,so2s)
# strip rule for the .so file
$(obj)/%.so: OBJCOPYFLAGS := -S
@@ -73,6 +68,11 @@
$(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ && \
rm $@.tmp
+# Extracts symbol offsets from the VDSO, converting them into an assembly file
+# that contains the same symbols at the same offsets.
+quiet_cmd_so2s = SO2S $@
+ cmd_so2s = $(NM) -D $< | $(srctree)/$(src)/so2s.sh > $@
+
# install commands for the unstripped file
quiet_cmd_vdso_install = INSTALL $@
cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
diff --git a/arch/riscv/kernel/vdso/so2s.sh b/arch/riscv/kernel/vdso/so2s.sh
new file mode 100755
index 0000000..e64cb6d
--- /dev/null
+++ b/arch/riscv/kernel/vdso/so2s.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright 2020 Palmer Dabbelt <palmerdabbelt@google.com>
+
+sed 's!\([0-9a-f]*\) T \([a-z0-9_]*\)\(@@LINUX_4.15\)*!.global \2\n.set \2,0x\1!' \
+| grep '^\.'
diff --git a/arch/riscv/mm/fault.c b/arch/riscv/mm/fault.c
index 1359e21..3c8b9e4 100644
--- a/arch/riscv/mm/fault.c
+++ b/arch/riscv/mm/fault.c
@@ -86,6 +86,7 @@
pmd_t *pmd, *pmd_k;
pte_t *pte_k;
int index;
+ unsigned long pfn;
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs))
@@ -100,7 +101,8 @@
* of a task switch.
*/
index = pgd_index(addr);
- pgd = (pgd_t *)pfn_to_virt(csr_read(CSR_SATP)) + index;
+ pfn = csr_read(CSR_SATP) & SATP_PPN;
+ pgd = (pgd_t *)pfn_to_virt(pfn) + index;
pgd_k = init_mm.pgd + index;
if (!pgd_present(*pgd_k)) {
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index ea933b7..8e577f1 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -154,9 +154,8 @@
void __init setup_bootmem(void)
{
- phys_addr_t mem_size = 0;
- phys_addr_t total_mem = 0;
- phys_addr_t mem_start, start, end = 0;
+ phys_addr_t mem_start = 0;
+ phys_addr_t start, end = 0;
phys_addr_t vmlinux_end = __pa_symbol(&_end);
phys_addr_t vmlinux_start = __pa_symbol(&_start);
u64 i;
@@ -164,21 +163,18 @@
/* Find the memory region containing the kernel */
for_each_mem_range(i, &start, &end) {
phys_addr_t size = end - start;
- if (!total_mem)
+ if (!mem_start)
mem_start = start;
if (start <= vmlinux_start && vmlinux_end <= end)
BUG_ON(size == 0);
- total_mem = total_mem + size;
}
/*
- * Remove memblock from the end of usable area to the
- * end of region
+ * The maximal physical memory size is -PAGE_OFFSET.
+ * Make sure that any memory beyond mem_start + (-PAGE_OFFSET) is removed
+ * as it is unusable by kernel.
*/
- mem_size = min(total_mem, (phys_addr_t)-PAGE_OFFSET);
- if (mem_start + mem_size < end)
- memblock_remove(mem_start + mem_size,
- end - mem_start - mem_size);
+ memblock_enforce_memory_limit(mem_start - PAGE_OFFSET);
/* Reserve from the start of the kernel to the end of the kernel */
memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
@@ -297,6 +293,7 @@
#define NUM_EARLY_PMDS (1UL + MAX_EARLY_MAPPING_SIZE / PGDIR_SIZE)
#endif
pmd_t early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
+pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
{
@@ -494,6 +491,18 @@
load_pa + (va - PAGE_OFFSET),
map_size, PAGE_KERNEL_EXEC);
+#ifndef __PAGETABLE_PMD_FOLDED
+ /* Setup early PMD for DTB */
+ create_pgd_mapping(early_pg_dir, DTB_EARLY_BASE_VA,
+ (uintptr_t)early_dtb_pmd, PGDIR_SIZE, PAGE_TABLE);
+ /* Create two consecutive PMD mappings for FDT early scan */
+ pa = dtb_pa & ~(PMD_SIZE - 1);
+ create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA,
+ pa, PMD_SIZE, PAGE_KERNEL);
+ create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA + PMD_SIZE,
+ pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
+ dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
+#else
/* Create two consecutive PGD mappings for FDT early scan */
pa = dtb_pa & ~(PGDIR_SIZE - 1);
create_pgd_mapping(early_pg_dir, DTB_EARLY_BASE_VA,
@@ -501,6 +510,7 @@
create_pgd_mapping(early_pg_dir, DTB_EARLY_BASE_VA + PGDIR_SIZE,
pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
+#endif
dtb_early_pa = dtb_pa;
/*
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index 0784bf3..fe6f529 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -1,3 +1,4 @@
+CONFIG_UAPI_HEADER_TEST=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_WATCH_QUEUE=y
@@ -93,9 +94,10 @@
CONFIG_FRONTSWAP=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
+CONFIG_CMA_AREAS=7
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_ZSWAP=y
-CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
@@ -378,7 +380,6 @@
CONFIG_CGROUP_NET_PRIO=y
CONFIG_BPF_JIT=y
CONFIG_NET_PKTGEN=m
-# CONFIG_NET_DROP_MONITOR is not set
CONFIG_PCI=y
# CONFIG_PCIEASPM is not set
CONFIG_PCI_DEBUG=y
@@ -386,7 +387,7 @@
CONFIG_HOTPLUG_PCI_S390=y
CONFIG_DEVTMPFS=y
CONFIG_CONNECTOR=y
-CONFIG_ZRAM=m
+CONFIG_ZRAM=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
@@ -689,6 +690,7 @@
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECRDSA=m
+CONFIG_CRYPTO_SM2=m
CONFIG_CRYPTO_CURVE25519=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
@@ -709,7 +711,6 @@
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES_TI=m
@@ -753,6 +754,7 @@
CONFIG_CRYPTO_AES_S390=m
CONFIG_CRYPTO_GHASH_S390=m
CONFIG_CRYPTO_CRC32_S390=y
+CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CORDIC=m
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC4=m
@@ -829,6 +831,7 @@
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAULT_INJECTION_USERCOPY=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig
index 905bc8c..17d5df2c 100644
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@@ -87,9 +87,10 @@
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
+CONFIG_CMA_AREAS=7
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_ZSWAP=y
-CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
@@ -371,7 +372,6 @@
CONFIG_CGROUP_NET_PRIO=y
CONFIG_BPF_JIT=y
CONFIG_NET_PKTGEN=m
-# CONFIG_NET_DROP_MONITOR is not set
CONFIG_PCI=y
# CONFIG_PCIEASPM is not set
CONFIG_HOTPLUG_PCI=y
@@ -379,7 +379,7 @@
CONFIG_UEVENT_HELPER=y
CONFIG_DEVTMPFS=y
CONFIG_CONNECTOR=y
-CONFIG_ZRAM=m
+CONFIG_ZRAM=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
@@ -680,6 +680,7 @@
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECRDSA=m
+CONFIG_CRYPTO_SM2=m
CONFIG_CRYPTO_CURVE25519=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
@@ -701,7 +702,6 @@
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA3=m
-CONFIG_CRYPTO_SM3=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES_TI=m
@@ -745,6 +745,7 @@
CONFIG_CRYPTO_AES_S390=m
CONFIG_CRYPTO_GHASH_S390=m
CONFIG_CRYPTO_CRC32_S390=y
+CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=m
CONFIG_CRC4=m
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
index 8f67c55..a302630 100644
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -17,11 +17,11 @@
# CONFIG_CHSC_SCH is not set
# CONFIG_SCM_BUS is not set
CONFIG_CRASH_DUMP=y
-# CONFIG_SECCOMP is not set
# CONFIG_PFAULT is not set
# CONFIG_S390_HYPFS_FS is not set
# CONFIG_VIRTUALIZATION is not set
# CONFIG_S390_GUEST is not set
+# CONFIG_SECCOMP is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 6b8d8c6..b5dbae7 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -692,16 +692,6 @@
return !!(pud_val(pud) & _REGION3_ENTRY_LARGE);
}
-static inline unsigned long pud_pfn(pud_t pud)
-{
- unsigned long origin_mask;
-
- origin_mask = _REGION_ENTRY_ORIGIN;
- if (pud_large(pud))
- origin_mask = _REGION3_ENTRY_ORIGIN_LARGE;
- return (pud_val(pud) & origin_mask) >> PAGE_SHIFT;
-}
-
#define pmd_leaf pmd_large
static inline int pmd_large(pmd_t pmd)
{
@@ -747,16 +737,6 @@
return pmd_val(pmd) == _SEGMENT_ENTRY_EMPTY;
}
-static inline unsigned long pmd_pfn(pmd_t pmd)
-{
- unsigned long origin_mask;
-
- origin_mask = _SEGMENT_ENTRY_ORIGIN;
- if (pmd_large(pmd))
- origin_mask = _SEGMENT_ENTRY_ORIGIN_LARGE;
- return (pmd_val(pmd) & origin_mask) >> PAGE_SHIFT;
-}
-
#define pmd_write pmd_write
static inline int pmd_write(pmd_t pmd)
{
@@ -1238,11 +1218,39 @@
#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
-#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN)
-#define pud_deref(pud) (pud_val(pud) & _REGION_ENTRY_ORIGIN)
#define p4d_deref(pud) (p4d_val(pud) & _REGION_ENTRY_ORIGIN)
#define pgd_deref(pgd) (pgd_val(pgd) & _REGION_ENTRY_ORIGIN)
+static inline unsigned long pmd_deref(pmd_t pmd)
+{
+ unsigned long origin_mask;
+
+ origin_mask = _SEGMENT_ENTRY_ORIGIN;
+ if (pmd_large(pmd))
+ origin_mask = _SEGMENT_ENTRY_ORIGIN_LARGE;
+ return pmd_val(pmd) & origin_mask;
+}
+
+static inline unsigned long pmd_pfn(pmd_t pmd)
+{
+ return pmd_deref(pmd) >> PAGE_SHIFT;
+}
+
+static inline unsigned long pud_deref(pud_t pud)
+{
+ unsigned long origin_mask;
+
+ origin_mask = _REGION_ENTRY_ORIGIN;
+ if (pud_large(pud))
+ origin_mask = _REGION3_ENTRY_ORIGIN_LARGE;
+ return pud_val(pud) & origin_mask;
+}
+
+static inline unsigned long pud_pfn(pud_t pud)
+{
+ return pud_deref(pud) >> PAGE_SHIFT;
+}
+
/*
* The pgd_offset function *always* adds the index for the top-level
* region/segment table. This is done to get a sequence like the
diff --git a/arch/s390/include/asm/vdso/vdso.h b/arch/s390/include/asm/vdso/vdso.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/s390/include/asm/vdso/vdso.h
+++ /dev/null
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index ece58f2..483051e 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -53,22 +53,14 @@
/* stack_frame offsets */
OFFSET(__SF_BACKCHAIN, stack_frame, back_chain);
OFFSET(__SF_GPRS, stack_frame, gprs);
- OFFSET(__SF_EMPTY, stack_frame, empty1);
- OFFSET(__SF_SIE_CONTROL, stack_frame, empty1[0]);
- OFFSET(__SF_SIE_SAVEAREA, stack_frame, empty1[1]);
- OFFSET(__SF_SIE_REASON, stack_frame, empty1[2]);
- OFFSET(__SF_SIE_FLAGS, stack_frame, empty1[3]);
+ OFFSET(__SF_EMPTY, stack_frame, empty1[0]);
+ OFFSET(__SF_SIE_CONTROL, stack_frame, empty1[1]);
+ OFFSET(__SF_SIE_SAVEAREA, stack_frame, empty1[2]);
+ OFFSET(__SF_SIE_REASON, stack_frame, empty1[3]);
+ OFFSET(__SF_SIE_FLAGS, stack_frame, empty1[4]);
BLANK();
OFFSET(__VDSO_GETCPU_VAL, vdso_per_cpu_data, getcpu_val);
BLANK();
- /* constants used by the vdso */
- DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME);
- DEFINE(__CLOCK_MONOTONIC, CLOCK_MONOTONIC);
- DEFINE(__CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE);
- DEFINE(__CLOCK_MONOTONIC_COARSE, CLOCK_MONOTONIC_COARSE);
- DEFINE(__CLOCK_THREAD_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID);
- DEFINE(__CLOCK_COARSE_RES, LOW_RES_NSEC);
- BLANK();
/* idle data offsets */
OFFSET(__CLOCK_IDLE_ENTER, s390_idle_data, clock_idle_enter);
OFFSET(__CLOCK_IDLE_EXIT, s390_idle_data, clock_idle_exit);
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 8623591..92beb14 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -422,6 +422,7 @@
#endif
LOCKDEP_SYS_EXIT
.Lsysc_tif:
+ DISABLE_INTS
TSTMSK __PT_FLAGS(%r11),_PIF_WORK
jnz .Lsysc_work
TSTMSK __TI_flags(%r12),_TIF_WORK
@@ -444,6 +445,7 @@
# One of the work bits is on. Find out which one.
#
.Lsysc_work:
+ ENABLE_INTS
TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED
jo .Lsysc_reschedule
TSTMSK __PT_FLAGS(%r11),_PIF_SYSCALL_RESTART
@@ -761,12 +763,7 @@
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
TSTMSK __LC_CPU_FLAGS,_CIF_IGNORE_IRQ
jo .Lio_restore
-#if IS_ENABLED(CONFIG_TRACE_IRQFLAGS)
- tmhh %r8,0x300
- jz 1f
TRACE_IRQS_OFF
-1:
-#endif
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
.Lio_loop:
lgr %r2,%r11 # pass pointer to pt_regs
@@ -789,12 +786,7 @@
TSTMSK __LC_CPU_FLAGS,_CIF_WORK
jnz .Lio_work
.Lio_restore:
-#if IS_ENABLED(CONFIG_TRACE_IRQFLAGS)
- tm __PT_PSW(%r11),3
- jno 0f
TRACE_IRQS_ON
-0:
-#endif
mvc __LC_RETURN_PSW(16),__PT_PSW(%r11)
tm __PT_PSW+1(%r11),0x01 # returning to user ?
jno .Lio_exit_kernel
@@ -974,12 +966,7 @@
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
TSTMSK __LC_CPU_FLAGS,_CIF_IGNORE_IRQ
jo .Lio_restore
-#if IS_ENABLED(CONFIG_TRACE_IRQFLAGS)
- tmhh %r8,0x300
- jz 1f
TRACE_IRQS_OFF
-1:
-#endif
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
lghi %r3,EXT_INTERRUPT
@@ -1066,6 +1053,7 @@
* %r4
*/
load_fpu_regs:
+ stnsm __SF_EMPTY(%r15),0xfc
lg %r4,__LC_CURRENT
aghi %r4,__TASK_thread
TSTMSK __LC_CPU_FLAGS,_CIF_FPU
@@ -1097,6 +1085,7 @@
.Lload_fpu_regs_done:
ni __LC_CPU_FLAGS+7,255-_CIF_FPU
.Lload_fpu_regs_exit:
+ ssm __SF_EMPTY(%r15)
BR_EX %r14
.Lload_fpu_regs_end:
ENDPROC(load_fpu_regs)
diff --git a/arch/s390/kernel/idle.c b/arch/s390/kernel/idle.c
index f7f1e64..2b85096 100644
--- a/arch/s390/kernel/idle.c
+++ b/arch/s390/kernel/idle.c
@@ -33,10 +33,10 @@
PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
clear_cpu_flag(CIF_NOHZ_DELAY);
- local_irq_save(flags);
+ raw_local_irq_save(flags);
/* Call the assembler magic in entry.S */
psw_idle(idle, psw_mask);
- local_irq_restore(flags);
+ raw_local_irq_restore(flags);
/* Account time spent with enabled wait psw loaded as idle time. */
raw_write_seqcount_begin(&idle->seqcount);
@@ -123,7 +123,7 @@
void arch_cpu_idle(void)
{
enabled_wait();
- local_irq_enable();
+ raw_local_irq_enable();
}
void arch_cpu_idle_exit(void)
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 4f9e462..19cd7b9 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -672,7 +672,7 @@
rcu_read_lock();
perf_prepare_sample(&header, data, event, regs);
- if (perf_output_begin(&handle, event, header.size))
+ if (perf_output_begin(&handle, data, event, header.size))
goto out;
/* Update the process ID (see also kernel/events/core.c) */
@@ -2228,4 +2228,4 @@
}
arch_initcall(init_cpum_sampling_pmu);
-core_param(cpum_sfb_size, CPUM_SF_MAX_SDB, sfb_size, 0640);
+core_param(cpum_sfb_size, CPUM_SF_MAX_SDB, sfb_size, 0644);
diff --git a/arch/s390/kernel/perf_regs.c b/arch/s390/kernel/perf_regs.c
index 4352a504..6e9e5d5 100644
--- a/arch/s390/kernel/perf_regs.c
+++ b/arch/s390/kernel/perf_regs.c
@@ -53,8 +53,7 @@
}
void perf_get_regs_user(struct perf_regs *regs_user,
- struct pt_regs *regs,
- struct pt_regs *regs_user_copy)
+ struct pt_regs *regs)
{
/*
* Use the regs from the first interruption and let
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index ebfe86d..390d97d 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -855,13 +855,14 @@
static void smp_init_secondary(void)
{
- int cpu = smp_processor_id();
+ int cpu = raw_smp_processor_id();
S390_lowcore.last_update_clock = get_tod_clock();
restore_access_regs(S390_lowcore.access_regs_save_area);
set_cpu_flag(CIF_ASCE_PRIMARY);
set_cpu_flag(CIF_ASCE_SECONDARY);
cpu_init();
+ rcu_cpu_starting(cpu);
preempt_disable();
init_cpu_timer();
vtime_init();
diff --git a/arch/s390/kernel/uv.c b/arch/s390/kernel/uv.c
index 14bd9d5..883bfed 100644
--- a/arch/s390/kernel/uv.c
+++ b/arch/s390/kernel/uv.c
@@ -129,8 +129,15 @@
.paddr = paddr
};
- if (uv_call(0, (u64)&uvcb))
+ if (uv_call(0, (u64)&uvcb)) {
+ /*
+ * Older firmware uses 107/d as an indication of a non secure
+ * page. Let us emulate the newer variant (no-op).
+ */
+ if (uvcb.header.rc == 0x107 && uvcb.header.rrc == 0xd)
+ return 0;
return -EINVAL;
+ }
return 0;
}
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 6b74b92..425d3d7 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -2312,7 +2312,7 @@
struct kvm_s390_pv_unp unp = {};
r = -EINVAL;
- if (!kvm_s390_pv_is_protected(kvm))
+ if (!kvm_s390_pv_is_protected(kvm) || !mm_is_protected(kvm->mm))
break;
r = -EFAULT;
@@ -3564,7 +3564,6 @@
vcpu->arch.sie_block->pp = 0;
vcpu->arch.sie_block->fpf &= ~FPF_BPBC;
vcpu->arch.sie_block->todpr = 0;
- vcpu->arch.sie_block->cpnc = 0;
}
}
@@ -3582,7 +3581,6 @@
regs->etoken = 0;
regs->etoken_extension = 0;
- regs->diag318 = 0;
}
int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
diff --git a/arch/s390/kvm/pv.c b/arch/s390/kvm/pv.c
index eb99e2f..f5847f9 100644
--- a/arch/s390/kvm/pv.c
+++ b/arch/s390/kvm/pv.c
@@ -208,7 +208,6 @@
return -EIO;
}
kvm->arch.gmap->guest_handle = uvcb.guest_handle;
- atomic_set(&kvm->mm->context.is_protected, 1);
return 0;
}
@@ -228,6 +227,8 @@
*rrc = uvcb.header.rrc;
KVM_UV_EVENT(kvm, 3, "PROTVIRT VM SET PARMS: rc %x rrc %x",
*rc, *rrc);
+ if (!cc)
+ atomic_set(&kvm->mm->context.is_protected, 1);
return cc ? -EINVAL : 0;
}
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index daca7ba..8c0c68e 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -33,7 +33,7 @@
static void __udelay_disabled(unsigned long long usecs)
{
- unsigned long cr0, cr0_new, psw_mask, flags;
+ unsigned long cr0, cr0_new, psw_mask;
struct s390_idle_data idle;
u64 end;
@@ -45,9 +45,8 @@
psw_mask = __extract_psw() | PSW_MASK_EXT | PSW_MASK_WAIT;
set_clock_comparator(end);
set_cpu_flag(CIF_IGNORE_IRQ);
- local_irq_save(flags);
psw_idle(&idle, psw_mask);
- local_irq_restore(flags);
+ trace_hardirqs_off();
clear_cpu_flag(CIF_IGNORE_IRQ);
set_clock_comparator(S390_lowcore.clock_comparator);
__ctl_load(cr0, 0, 0);
diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index cfb0017..64795d0 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -2690,6 +2690,8 @@
#include <linux/sched/mm.h>
void s390_reset_acc(struct mm_struct *mm)
{
+ if (!mm_is_protected(mm))
+ return;
/*
* we might be called during
* reset: we walk the pages and clear
diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
index d33f215..9a6bae5 100644
--- a/arch/s390/pci/pci_event.c
+++ b/arch/s390/pci/pci_event.c
@@ -101,6 +101,10 @@
if (ret)
break;
+ /* the PCI function will be scanned once function 0 appears */
+ if (!zdev->zbus->bus)
+ break;
+
pdev = pci_scan_single_device(zdev->zbus->bus, zdev->devfn);
if (!pdev)
break;
diff --git a/arch/s390/pci/pci_irq.c b/arch/s390/pci/pci_irq.c
index 743f257..75217fb 100644
--- a/arch/s390/pci/pci_irq.c
+++ b/arch/s390/pci/pci_irq.c
@@ -103,9 +103,10 @@
{
struct msi_desc *entry = irq_get_msi_desc(data->irq);
struct msi_msg msg = entry->msg;
+ int cpu_addr = smp_cpu_get_cpu_address(cpumask_first(dest));
msg.address_lo &= 0xff0000ff;
- msg.address_lo |= (cpumask_first(dest) << 8);
+ msg.address_lo |= (cpu_addr << 8);
pci_write_msi_msg(data->irq, &msg);
return IRQ_SET_MASK_OK;
@@ -238,6 +239,7 @@
unsigned long bit;
struct msi_desc *msi;
struct msi_msg msg;
+ int cpu_addr;
int rc, irq;
zdev->aisb = -1UL;
@@ -287,9 +289,15 @@
handle_percpu_irq);
msg.data = hwirq - bit;
if (irq_delivery == DIRECTED) {
+ if (msi->affinity)
+ cpu = cpumask_first(&msi->affinity->mask);
+ else
+ cpu = 0;
+ cpu_addr = smp_cpu_get_cpu_address(cpu);
+
msg.address_lo = zdev->msi_addr & 0xff0000ff;
- msg.address_lo |= msi->affinity ?
- (cpumask_first(&msi->affinity->mask) << 8) : 0;
+ msg.address_lo |= (cpu_addr << 8);
+
for_each_possible_cpu(cpu) {
airq_iv_set_data(zpci_ibv[cpu], hwirq, irq);
}
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index 0dc0f52..f598149 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -22,7 +22,7 @@
void default_idle(void)
{
set_bl_bit();
- local_irq_enable();
+ raw_local_irq_enable();
/* Isn't this racy ? */
cpu_sleep();
clear_bl_bit();
diff --git a/arch/sparc/kernel/leon_pmc.c b/arch/sparc/kernel/leon_pmc.c
index 065e2d4..396f46b 100644
--- a/arch/sparc/kernel/leon_pmc.c
+++ b/arch/sparc/kernel/leon_pmc.c
@@ -50,7 +50,7 @@
register unsigned int address = (unsigned int)leon3_irqctrl_regs;
/* Interrupts need to be enabled to not hang the CPU */
- local_irq_enable();
+ raw_local_irq_enable();
__asm__ __volatile__ (
"wr %%g0, %%asr19\n"
@@ -66,7 +66,7 @@
static void pmc_leon_idle(void)
{
/* Interrupts need to be enabled to not hang the CPU */
- local_irq_enable();
+ raw_local_irq_enable();
/* For systems without power-down, this will be no-op */
__asm__ __volatile__ ("wr %g0, %asr19\n\t");
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index adfcaea..a023637 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -74,7 +74,7 @@
{
if (sparc_idle)
(*sparc_idle)();
- local_irq_enable();
+ raw_local_irq_enable();
}
/* XXX cli/sti -> local_irq_xxx here, check this works once SMP is fixed. */
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index a75093b..6f8c782 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -62,11 +62,11 @@
{
if (tlb_type != hypervisor) {
touch_nmi_watchdog();
- local_irq_enable();
+ raw_local_irq_enable();
} else {
unsigned long pstate;
- local_irq_enable();
+ raw_local_irq_enable();
/* The sun4v sleeping code requires that we have PSTATE.IE cleared over
* the cpu sleep hypervisor call.
diff --git a/arch/sparc/lib/csum_copy.S b/arch/sparc/lib/csum_copy.S
index 0c0268e..d839956 100644
--- a/arch/sparc/lib/csum_copy.S
+++ b/arch/sparc/lib/csum_copy.S
@@ -71,7 +71,7 @@
FUNC_NAME: /* %o0=src, %o1=dst, %o2=len */
LOAD(prefetch, %o0 + 0x000, #n_reads)
xor %o0, %o1, %g1
- mov 1, %o3
+ mov -1, %o3
clr %o4
andcc %g1, 0x3, %g0
bne,pn %icc, 95f
diff --git a/arch/um/include/asm/pgalloc.h b/arch/um/include/asm/pgalloc.h
index 5393e13..2bbf28c 100644
--- a/arch/um/include/asm/pgalloc.h
+++ b/arch/um/include/asm/pgalloc.h
@@ -33,7 +33,13 @@
} while (0)
#ifdef CONFIG_3_LEVEL_PGTABLES
-#define __pmd_free_tlb(tlb,x, address) tlb_remove_page((tlb),virt_to_page(x))
+
+#define __pmd_free_tlb(tlb, pmd, address) \
+do { \
+ pgtable_pmd_page_dtor(virt_to_page(pmd)); \
+ tlb_remove_page((tlb),virt_to_page(pmd)); \
+} while (0) \
+
#endif
#endif
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 3bed095..9505a7e 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -217,7 +217,7 @@
{
cpu_tasks[current_thread_info()->cpu].pid = os_getpid();
um_idle_sleep();
- local_irq_enable();
+ raw_local_irq_enable();
}
int __cant_sleep(void) {
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f6946b8..fbf26e0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -100,6 +100,7 @@
select ARCH_WANT_DEFAULT_BPF_JIT if X86_64
select ARCH_WANTS_DYNAMIC_TASK_STRUCT
select ARCH_WANT_HUGE_PMD_SHARE
+ select ARCH_WANT_LD_ORPHAN_WARN
select ARCH_WANTS_THP_SWAP if X86_64
select BUILDTIME_TABLE_SORT
select CLKEVT_I8253
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 154259f1..1bf2174 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -209,9 +209,6 @@
LDFLAGS_vmlinux += -z max-page-size=0x200000
endif
-# We never want expected sections to be placed heuristically by the
-# linker. All sections should be explicitly named in the linker script.
-LDFLAGS_vmlinux += $(call ld-option, --orphan-handling=warn)
archscripts: scripts_basic
$(Q)$(MAKE) $(build)=arch/x86/tools relocs
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index ee24908..40b8fd3 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -61,7 +61,9 @@
# Compressed kernel should be built as PIE since it may be loaded at any
# address by the bootloader.
LDFLAGS_vmlinux := -pie $(call ld-option, --no-dynamic-linker)
-LDFLAGS_vmlinux += $(call ld-option, --orphan-handling=warn)
+ifdef CONFIG_LD_ORPHAN_WARN
+LDFLAGS_vmlinux += --orphan-handling=warn
+endif
LDFLAGS_vmlinux += -T
hostprogs := mkpiggy
diff --git a/arch/x86/boot/compressed/ident_map_64.c b/arch/x86/boot/compressed/ident_map_64.c
index a5e5db6..39b2ede 100644
--- a/arch/x86/boot/compressed/ident_map_64.c
+++ b/arch/x86/boot/compressed/ident_map_64.c
@@ -164,6 +164,7 @@
add_identity_map(cmdline, cmdline + COMMAND_LINE_SIZE);
/* Load the new page-table. */
+ sev_verify_cbit(top_level_pgt);
write_cr3(top_level_pgt);
}
diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S
index dd07e7b..aa56179 100644
--- a/arch/x86/boot/compressed/mem_encrypt.S
+++ b/arch/x86/boot/compressed/mem_encrypt.S
@@ -68,6 +68,9 @@
SYM_FUNC_END(get_sev_encryption_bit)
.code64
+
+#include "../../kernel/sev_verify_cbit.S"
+
SYM_FUNC_START(set_sev_encryption_mask)
#ifdef CONFIG_AMD_MEM_ENCRYPT
push %rbp
@@ -81,6 +84,19 @@
bts %rax, sme_me_mask(%rip) /* Create the encryption mask */
+ /*
+ * Read MSR_AMD64_SEV again and store it to sev_status. Can't do this in
+ * get_sev_encryption_bit() because this function is 32-bit code and
+ * shared between 64-bit and 32-bit boot path.
+ */
+ movl $MSR_AMD64_SEV, %ecx /* Read the SEV MSR */
+ rdmsr
+
+ /* Store MSR value in sev_status */
+ shlq $32, %rdx
+ orq %rdx, %rax
+ movq %rax, sev_status(%rip)
+
.Lno_sev_mask:
movq %rbp, %rsp /* Restore original stack pointer */
@@ -96,5 +112,7 @@
#ifdef CONFIG_AMD_MEM_ENCRYPT
.balign 8
-SYM_DATA(sme_me_mask, .quad 0)
+SYM_DATA(sme_me_mask, .quad 0)
+SYM_DATA(sev_status, .quad 0)
+SYM_DATA(sev_check_data, .quad 0)
#endif
diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
index 6d31f1b..d9a631c 100644
--- a/arch/x86/boot/compressed/misc.h
+++ b/arch/x86/boot/compressed/misc.h
@@ -159,4 +159,6 @@
void boot_stage1_vc(void);
void boot_stage2_vc(void);
+unsigned long sev_verify_cbit(unsigned long cr3);
+
#endif /* BOOT_COMPRESSED_MISC_H */
diff --git a/arch/x86/boot/compressed/sev-es.c b/arch/x86/boot/compressed/sev-es.c
index 954cb27..27826c2 100644
--- a/arch/x86/boot/compressed/sev-es.c
+++ b/arch/x86/boot/compressed/sev-es.c
@@ -32,13 +32,12 @@
*/
static bool insn_has_rep_prefix(struct insn *insn)
{
+ insn_byte_t p;
int i;
insn_get_prefixes(insn);
- for (i = 0; i < insn->prefixes.nbytes; i++) {
- insn_byte_t p = insn->prefixes.bytes[i];
-
+ for_each_insn_prefix(insn, i, p) {
if (p == 0xf2 || p == 0xf3)
return true;
}
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index f1926e9..af457f8c 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2630,7 +2630,7 @@
u64 pebs_enabled = cpuc->pebs_enabled;
handled++;
- x86_pmu.drain_pebs(regs);
+ x86_pmu.drain_pebs(regs, &data);
status &= x86_pmu.intel_ctrl | GLOBAL_STATUS_TRACE_TOPAPMI;
/*
@@ -4987,6 +4987,12 @@
x86_add_quirk(intel_arch_events_quirk); /* Install first, so it runs last */
+ if (version >= 5) {
+ x86_pmu.intel_cap.anythread_deprecated = edx.split.anythread_deprecated;
+ if (x86_pmu.intel_cap.anythread_deprecated)
+ pr_cont(" AnyThread deprecated, ");
+ }
+
/*
* Install the hw-cache-events table:
*/
@@ -5512,6 +5518,10 @@
x86_pmu.intel_ctrl |=
((1LL << x86_pmu.num_counters_fixed)-1) << INTEL_PMC_IDX_FIXED;
+ /* AnyThread may be deprecated on arch perfmon v5 or later */
+ if (x86_pmu.intel_cap.anythread_deprecated)
+ x86_pmu.format_attrs = intel_arch_formats_attr;
+
if (x86_pmu.event_constraints) {
/*
* event on fixed counter2 (REF_CYCLES) only works on this
diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c
index 442e1ed..4eb7ee5 100644
--- a/arch/x86/events/intel/cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -107,14 +107,14 @@
MODULE_LICENSE("GPL");
#define DEFINE_CSTATE_FORMAT_ATTR(_var, _name, _format) \
-static ssize_t __cstate_##_var##_show(struct kobject *kobj, \
- struct kobj_attribute *attr, \
+static ssize_t __cstate_##_var##_show(struct device *dev, \
+ struct device_attribute *attr, \
char *page) \
{ \
BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE); \
return sprintf(page, _format "\n"); \
} \
-static struct kobj_attribute format_attr_##_var = \
+static struct device_attribute format_attr_##_var = \
__ATTR(_name, 0444, __cstate_##_var##_show, NULL)
static ssize_t cstate_get_attr_cpumask(struct device *dev,
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 404315d..485c506 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -642,8 +642,8 @@
rcu_read_lock();
perf_prepare_sample(&header, &data, event, ®s);
- if (perf_output_begin(&handle, event, header.size *
- (top - base - skip)))
+ if (perf_output_begin(&handle, &data, event,
+ header.size * (top - base - skip)))
goto unlock;
for (at = base; at < top; at++) {
@@ -670,7 +670,9 @@
static inline void intel_pmu_drain_pebs_buffer(void)
{
- x86_pmu.drain_pebs(NULL);
+ struct perf_sample_data data;
+
+ x86_pmu.drain_pebs(NULL, &data);
}
/*
@@ -1719,23 +1721,24 @@
return 0;
}
-static void __intel_pmu_pebs_event(struct perf_event *event,
- struct pt_regs *iregs,
- void *base, void *top,
- int bit, int count,
- void (*setup_sample)(struct perf_event *,
- struct pt_regs *,
- void *,
- struct perf_sample_data *,
- struct pt_regs *))
+static __always_inline void
+__intel_pmu_pebs_event(struct perf_event *event,
+ struct pt_regs *iregs,
+ struct perf_sample_data *data,
+ void *base, void *top,
+ int bit, int count,
+ void (*setup_sample)(struct perf_event *,
+ struct pt_regs *,
+ void *,
+ struct perf_sample_data *,
+ struct pt_regs *))
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
- struct perf_sample_data data;
struct x86_perf_regs perf_regs;
struct pt_regs *regs = &perf_regs.regs;
void *at = get_next_pebs_record_by_bit(base, top, bit);
- struct pt_regs dummy_iregs;
+ static struct pt_regs dummy_iregs;
if (hwc->flags & PERF_X86_EVENT_AUTO_RELOAD) {
/*
@@ -1752,14 +1755,14 @@
iregs = &dummy_iregs;
while (count > 1) {
- setup_sample(event, iregs, at, &data, regs);
- perf_event_output(event, &data, regs);
+ setup_sample(event, iregs, at, data, regs);
+ perf_event_output(event, data, regs);
at += cpuc->pebs_record_size;
at = get_next_pebs_record_by_bit(at, top, bit);
count--;
}
- setup_sample(event, iregs, at, &data, regs);
+ setup_sample(event, iregs, at, data, regs);
if (iregs == &dummy_iregs) {
/*
* The PEBS records may be drained in the non-overflow context,
@@ -1767,18 +1770,18 @@
* last record the same as other PEBS records, and doesn't
* invoke the generic overflow handler.
*/
- perf_event_output(event, &data, regs);
+ perf_event_output(event, data, regs);
} else {
/*
* All but the last records are processed.
* The last one is left to be able to call the overflow handler.
*/
- if (perf_event_overflow(event, &data, regs))
+ if (perf_event_overflow(event, data, regs))
x86_pmu_stop(event, 0);
}
}
-static void intel_pmu_drain_pebs_core(struct pt_regs *iregs)
+static void intel_pmu_drain_pebs_core(struct pt_regs *iregs, struct perf_sample_data *data)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct debug_store *ds = cpuc->ds;
@@ -1812,7 +1815,7 @@
return;
}
- __intel_pmu_pebs_event(event, iregs, at, top, 0, n,
+ __intel_pmu_pebs_event(event, iregs, data, at, top, 0, n,
setup_pebs_fixed_sample_data);
}
@@ -1835,7 +1838,7 @@
}
}
-static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
+static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs, struct perf_sample_data *data)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct debug_store *ds = cpuc->ds;
@@ -1913,7 +1916,7 @@
* that caused the PEBS record. It's called collision.
* If collision happened, the record will be dropped.
*/
- if (p->status != (1ULL << bit)) {
+ if (pebs_status != (1ULL << bit)) {
for_each_set_bit(i, (unsigned long *)&pebs_status, size)
error[i]++;
continue;
@@ -1937,19 +1940,19 @@
if (error[bit]) {
perf_log_lost_samples(event, error[bit]);
- if (perf_event_account_interrupt(event))
+ if (iregs && perf_event_account_interrupt(event))
x86_pmu_stop(event, 0);
}
if (counts[bit]) {
- __intel_pmu_pebs_event(event, iregs, base,
+ __intel_pmu_pebs_event(event, iregs, data, base,
top, bit, counts[bit],
setup_pebs_fixed_sample_data);
}
}
}
-static void intel_pmu_drain_pebs_icl(struct pt_regs *iregs)
+static void intel_pmu_drain_pebs_icl(struct pt_regs *iregs, struct perf_sample_data *data)
{
short counts[INTEL_PMC_IDX_FIXED + MAX_FIXED_PEBS_EVENTS] = {};
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
@@ -1997,7 +2000,7 @@
if (WARN_ON_ONCE(!event->attr.precise_ip))
continue;
- __intel_pmu_pebs_event(event, iregs, base,
+ __intel_pmu_pebs_event(event, iregs, data, base,
top, bit, counts[bit],
setup_pebs_adaptive_sample_data);
}
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index 86d012b..80d52cb 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -94,8 +94,8 @@
return map;
}
-ssize_t uncore_event_show(struct kobject *kobj,
- struct kobj_attribute *attr, char *buf)
+ssize_t uncore_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct uncore_event_desc *event =
container_of(attr, struct uncore_event_desc, attr);
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index 83d2a7d..9efea15 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -157,7 +157,7 @@
#define UNCORE_BOX_FLAG_CFL8_CBOX_MSR_OFFS 2
struct uncore_event_desc {
- struct kobj_attribute attr;
+ struct device_attribute attr;
const char *config;
};
@@ -179,8 +179,8 @@
struct pci2phy_map *__find_pci2phy_map(int segment);
int uncore_pcibus_to_physid(struct pci_bus *bus);
-ssize_t uncore_event_show(struct kobject *kobj,
- struct kobj_attribute *attr, char *buf);
+ssize_t uncore_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
static inline struct intel_uncore_pmu *dev_to_uncore_pmu(struct device *dev)
{
@@ -201,14 +201,14 @@
}
#define DEFINE_UNCORE_FORMAT_ATTR(_var, _name, _format) \
-static ssize_t __uncore_##_var##_show(struct kobject *kobj, \
- struct kobj_attribute *attr, \
+static ssize_t __uncore_##_var##_show(struct device *dev, \
+ struct device_attribute *attr, \
char *page) \
{ \
BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE); \
return sprintf(page, _format "\n"); \
} \
-static struct kobj_attribute format_attr_##_var = \
+static struct device_attribute format_attr_##_var = \
__ATTR(_name, 0444, __uncore_##_var##_show, NULL)
static inline bool uncore_pmc_fixed(int idx)
diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c
index 39e632e..bbd1120 100644
--- a/arch/x86/events/intel/uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@@ -475,7 +475,7 @@
static struct freerunning_counters snb_uncore_imc_freerunning[] = {
[SNB_PCI_UNCORE_IMC_DATA_READS] = { SNB_UNCORE_PCI_IMC_DATA_READS_BASE,
0x0, 0x0, 1, 32 },
- [SNB_PCI_UNCORE_IMC_DATA_READS] = { SNB_UNCORE_PCI_IMC_DATA_WRITES_BASE,
+ [SNB_PCI_UNCORE_IMC_DATA_WRITES] = { SNB_UNCORE_PCI_IMC_DATA_WRITES_BASE,
0x0, 0x0, 1, 32 },
[SNB_PCI_UNCORE_IMC_GT_REQUESTS] = { SNB_UNCORE_PCI_IMC_GT_REQUESTS_BASE,
0x0, 0x0, 1, 32 },
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index ee2b9b9..6a8edfe 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -585,6 +585,7 @@
u64 pebs_baseline:1;
u64 perf_metrics:1;
u64 pebs_output_pt_available:1;
+ u64 anythread_deprecated:1;
};
u64 capabilities;
};
@@ -727,7 +728,7 @@
int pebs_record_size;
int pebs_buffer_size;
int max_pebs_events;
- void (*drain_pebs)(struct pt_regs *regs);
+ void (*drain_pebs)(struct pt_regs *regs, struct perf_sample_data *data);
struct event_constraint *pebs_constraints;
void (*pebs_aliases)(struct perf_event *event);
unsigned long large_pebs_flags;
diff --git a/arch/x86/events/rapl.c b/arch/x86/events/rapl.c
index 7c0120e..7dbbeaa 100644
--- a/arch/x86/events/rapl.c
+++ b/arch/x86/events/rapl.c
@@ -93,18 +93,6 @@
* any other bit is reserved
*/
#define RAPL_EVENT_MASK 0xFFULL
-
-#define DEFINE_RAPL_FORMAT_ATTR(_var, _name, _format) \
-static ssize_t __rapl_##_var##_show(struct kobject *kobj, \
- struct kobj_attribute *attr, \
- char *page) \
-{ \
- BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE); \
- return sprintf(page, _format "\n"); \
-} \
-static struct kobj_attribute format_attr_##_var = \
- __ATTR(_name, 0444, __rapl_##_var##_show, NULL)
-
#define RAPL_CNTR_WIDTH 32
#define RAPL_EVENT_ATTR_STR(_name, v, str) \
@@ -441,7 +429,7 @@
.attrs = attrs_empty,
};
-DEFINE_RAPL_FORMAT_ATTR(event, event, "config:0-7");
+PMU_FORMAT_ATTR(event, "config:0-7");
static struct attribute *rapl_formats_attr[] = {
&format_attr_event.attr,
NULL,
diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c
index 40e0e32..284e736 100644
--- a/arch/x86/hyperv/hv_apic.c
+++ b/arch/x86/hyperv/hv_apic.c
@@ -273,11 +273,15 @@
pr_info("Hyper-V: Using enlightened APIC (%s mode)",
x2apic_enabled() ? "x2apic" : "xapic");
/*
- * With x2apic, architectural x2apic MSRs are equivalent to the
- * respective synthetic MSRs, so there's no need to override
- * the apic accessors. The only exception is
- * hv_apic_eoi_write, because it benefits from lazy EOI when
- * available, but it works for both xapic and x2apic modes.
+ * When in x2apic mode, don't use the Hyper-V specific APIC
+ * accessors since the field layout in the ICR register is
+ * different in x2apic mode. Furthermore, the architectural
+ * x2apic MSRs function just as well as the Hyper-V
+ * synthetic APIC MSRs, so there's no benefit in having
+ * separate Hyper-V accessors for x2apic mode. The only
+ * exception is hv_apic_eoi_write, because it benefits from
+ * lazy EOI when available, but the same accessor works for
+ * both xapic and x2apic because the field layout is the same.
*/
apic_set_eoi_write(hv_apic_eoi_write);
if (!x2apic_enabled()) {
diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
index 5c1ae3e..a8c3d28 100644
--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -201,6 +201,21 @@
return insn_offset_displacement(insn) + insn->displacement.nbytes;
}
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx: Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix) \
+ for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
#define POP_SS_OPCODE 0x1f
#define MOV_SREG_OPCODE 0x8e
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index d44858b..7e5f33a 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -639,6 +639,7 @@
int cpuid_nent;
struct kvm_cpuid_entry2 *cpuid_entries;
+ unsigned long cr3_lm_rsvd_bits;
int maxphyaddr;
int max_tdp_level;
@@ -1655,6 +1656,7 @@
int kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
int kvm_cpu_has_injectable_intr(struct kvm_vcpu *v);
int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu);
+int kvm_cpu_has_extint(struct kvm_vcpu *v);
int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event);
diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
index e039a93..29dd27b 100644
--- a/arch/x86/include/asm/mwait.h
+++ b/arch/x86/include/asm/mwait.h
@@ -88,8 +88,6 @@
static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
{
- trace_hardirqs_on();
-
mds_idle_clear_cpu_buffers();
/* "mwait %eax, %ecx;" */
asm volatile("sti; .byte 0x0f, 0x01, 0xc9;"
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 6960cd6..b9a7fd0 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -137,7 +137,9 @@
struct {
unsigned int num_counters_fixed:5;
unsigned int bit_width_fixed:8;
- unsigned int reserved:19;
+ unsigned int reserved1:2;
+ unsigned int anythread_deprecated:1;
+ unsigned int reserved2:16;
} split;
unsigned int full;
};
diff --git a/arch/x86/include/asm/sparsemem.h b/arch/x86/include/asm/sparsemem.h
index 6bfc878..6a9ccc1 100644
--- a/arch/x86/include/asm/sparsemem.h
+++ b/arch/x86/include/asm/sparsemem.h
@@ -28,4 +28,14 @@
#endif
#endif /* CONFIG_SPARSEMEM */
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_NUMA_KEEP_MEMINFO
+extern int phys_to_target_node(phys_addr_t start);
+#define phys_to_target_node phys_to_target_node
+extern int memory_add_physaddr_to_nid(u64 start);
+#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
+#endif
+#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_X86_SPARSEMEM_H */
diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index 172d3e4a..648eb23f 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -2,14 +2,8 @@
#ifndef _ASM_X86_UV_UV_H
#define _ASM_X86_UV_UV_H
-#include <asm/tlbflush.h>
-
enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC};
-struct cpumask;
-struct mm_struct;
-struct flush_tlb_info;
-
#ifdef CONFIG_X86_UV
#include <linux/efi.h>
@@ -44,10 +38,6 @@
static inline int is_uv_hubbed(int uv) { return 0; }
static inline void uv_cpu_init(void) { }
static inline void uv_system_init(void) { }
-static inline const struct cpumask *
-uv_flush_tlb_others(const struct cpumask *cpumask,
- const struct flush_tlb_info *info)
-{ return cpumask; }
#endif /* X86_UV */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 714233c..235f5cd 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -33,7 +33,7 @@
static int uv_node_id;
/* Unpack AT/OEM/TABLE ID's to be NULL terminated strings */
-static u8 uv_archtype[UV_AT_SIZE];
+static u8 uv_archtype[UV_AT_SIZE + 1];
static u8 oem_id[ACPI_OEM_ID_SIZE + 1];
static u8 oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
@@ -161,7 +161,7 @@
/* UV4/4A only have a revision difference */
case UV4_HUB_PART_NUMBER:
uv_min_hub_revision_id = node_id.s.revision
- + UV4_HUB_REVISION_BASE;
+ + UV4_HUB_REVISION_BASE - 1;
uv_hub_type_set(UV4);
if (uv_min_hub_revision_id == UV4A_HUB_REVISION_BASE)
uv_hub_type_set(UV4|UV4A);
@@ -290,6 +290,9 @@
{
/* Relies on 'to' being NULL chars so result will be NULL terminated */
strncpy(to, from, len-1);
+
+ /* Trim trailing spaces */
+ (void)strim(to);
}
/* Find UV arch type entry in UVsystab */
@@ -317,7 +320,7 @@
if (n > 0 && n < sizeof(uv_ate->archtype)) {
pr_info("UV: UVarchtype received from BIOS\n");
- uv_stringify(UV_AT_SIZE, uv_archtype, uv_ate->archtype);
+ uv_stringify(sizeof(uv_archtype), uv_archtype, uv_ate->archtype);
return 1;
}
return 0;
@@ -366,7 +369,7 @@
return ret;
}
-static int __init uv_set_system_type(char *_oem_id)
+static int __init uv_set_system_type(char *_oem_id, char *_oem_table_id)
{
/* Save OEM_ID passed from ACPI MADT */
uv_stringify(sizeof(oem_id), oem_id, _oem_id);
@@ -375,7 +378,7 @@
if (!early_get_arch_type())
/* If not use OEM ID for UVarchtype */
- uv_stringify(UV_AT_SIZE, uv_archtype, _oem_id);
+ uv_stringify(sizeof(uv_archtype), uv_archtype, oem_id);
/* Check if not hubbed */
if (strncmp(uv_archtype, "SGI", 3) != 0) {
@@ -386,13 +389,23 @@
/* (Not hubless), not a UV */
return 0;
+ /* Is UV hubless system */
+ uv_hubless_system = 0x01;
+
+ /* UV5 Hubless */
+ if (strncmp(uv_archtype, "NSGI5", 5) == 0)
+ uv_hubless_system |= 0x20;
+
/* UV4 Hubless: CH */
- if (strncmp(uv_archtype, "NSGI4", 5) == 0)
- uv_hubless_system = 0x11;
+ else if (strncmp(uv_archtype, "NSGI4", 5) == 0)
+ uv_hubless_system |= 0x10;
/* UV3 Hubless: UV300/MC990X w/o hub */
else
- uv_hubless_system = 0x9;
+ uv_hubless_system |= 0x8;
+
+ /* Copy APIC type */
+ uv_stringify(sizeof(oem_table_id), oem_table_id, _oem_table_id);
pr_info("UV: OEM IDs %s/%s, SystemType %d, HUBLESS ID %x\n",
oem_id, oem_table_id, uv_system_type, uv_hubless_system);
@@ -456,7 +469,7 @@
uv_cpu_info->p_uv_hub_info = &uv_hub_info_node0;
/* If not UV, return. */
- if (likely(uv_set_system_type(_oem_id) == 0))
+ if (uv_set_system_type(_oem_id, _oem_table_id) == 0)
return 0;
/* Save and Decode OEM Table ID */
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index d3f0db46..d41b70f 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -739,11 +739,13 @@
if (boot_cpu_has(X86_FEATURE_IBPB)) {
setup_force_cpu_cap(X86_FEATURE_USE_IBPB);
+ spectre_v2_user_ibpb = mode;
switch (cmd) {
case SPECTRE_V2_USER_CMD_FORCE:
case SPECTRE_V2_USER_CMD_PRCTL_IBPB:
case SPECTRE_V2_USER_CMD_SECCOMP_IBPB:
static_branch_enable(&switch_mm_always_ibpb);
+ spectre_v2_user_ibpb = SPECTRE_V2_USER_STRICT;
break;
case SPECTRE_V2_USER_CMD_PRCTL:
case SPECTRE_V2_USER_CMD_AUTO:
@@ -757,8 +759,6 @@
pr_info("mitigation: Enabling %s Indirect Branch Prediction Barrier\n",
static_key_enabled(&switch_mm_always_ibpb) ?
"always-on" : "conditional");
-
- spectre_v2_user_ibpb = mode;
}
/*
@@ -1254,6 +1254,14 @@
return 0;
}
+static bool is_spec_ib_user_controlled(void)
+{
+ return spectre_v2_user_ibpb == SPECTRE_V2_USER_PRCTL ||
+ spectre_v2_user_ibpb == SPECTRE_V2_USER_SECCOMP ||
+ spectre_v2_user_stibp == SPECTRE_V2_USER_PRCTL ||
+ spectre_v2_user_stibp == SPECTRE_V2_USER_SECCOMP;
+}
+
static int ib_prctl_set(struct task_struct *task, unsigned long ctrl)
{
switch (ctrl) {
@@ -1261,16 +1269,26 @@
if (spectre_v2_user_ibpb == SPECTRE_V2_USER_NONE &&
spectre_v2_user_stibp == SPECTRE_V2_USER_NONE)
return 0;
+
/*
- * Indirect branch speculation is always disabled in strict
- * mode. It can neither be enabled if it was force-disabled
- * by a previous prctl call.
+ * With strict mode for both IBPB and STIBP, the instruction
+ * code paths avoid checking this task flag and instead,
+ * unconditionally run the instruction. However, STIBP and IBPB
+ * are independent and either can be set to conditionally
+ * enabled regardless of the mode of the other.
+ *
+ * If either is set to conditional, allow the task flag to be
+ * updated, unless it was force-disabled by a previous prctl
+ * call. Currently, this is possible on an AMD CPU which has the
+ * feature X86_FEATURE_AMD_STIBP_ALWAYS_ON. In this case, if the
+ * kernel is booted with 'spectre_v2_user=seccomp', then
+ * spectre_v2_user_ibpb == SPECTRE_V2_USER_SECCOMP and
+ * spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED.
*/
- if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT ||
- spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT ||
- spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED ||
+ if (!is_spec_ib_user_controlled() ||
task_spec_ib_force_disable(task))
return -EPERM;
+
task_clear_spec_ib_disable(task);
task_update_spec_tif(task);
break;
@@ -1283,10 +1301,10 @@
if (spectre_v2_user_ibpb == SPECTRE_V2_USER_NONE &&
spectre_v2_user_stibp == SPECTRE_V2_USER_NONE)
return -EPERM;
- if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT ||
- spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT ||
- spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED)
+
+ if (!is_spec_ib_user_controlled())
return 0;
+
task_set_spec_ib_disable(task);
if (ctrl == PR_SPEC_FORCE_DISABLE)
task_set_spec_ib_force_disable(task);
@@ -1351,20 +1369,17 @@
if (spectre_v2_user_ibpb == SPECTRE_V2_USER_NONE &&
spectre_v2_user_stibp == SPECTRE_V2_USER_NONE)
return PR_SPEC_ENABLE;
- else if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT ||
- spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT ||
- spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED)
- return PR_SPEC_DISABLE;
- else if (spectre_v2_user_ibpb == SPECTRE_V2_USER_PRCTL ||
- spectre_v2_user_ibpb == SPECTRE_V2_USER_SECCOMP ||
- spectre_v2_user_stibp == SPECTRE_V2_USER_PRCTL ||
- spectre_v2_user_stibp == SPECTRE_V2_USER_SECCOMP) {
+ else if (is_spec_ib_user_controlled()) {
if (task_spec_ib_force_disable(task))
return PR_SPEC_PRCTL | PR_SPEC_FORCE_DISABLE;
if (task_spec_ib_disable(task))
return PR_SPEC_PRCTL | PR_SPEC_DISABLE;
return PR_SPEC_PRCTL | PR_SPEC_ENABLE;
- } else
+ } else if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT ||
+ spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT ||
+ spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED)
+ return PR_SPEC_DISABLE;
+ else
return PR_SPEC_NOT_AFFECTED;
}
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 4102b86..32b7099 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1384,8 +1384,10 @@
* When there's any problem use only local no_way_out state.
*/
if (!lmce) {
- if (mce_end(order) < 0)
- no_way_out = worst >= MCE_PANIC_SEVERITY;
+ if (mce_end(order) < 0) {
+ if (!no_way_out)
+ no_way_out = worst >= MCE_PANIC_SEVERITY;
+ }
} else {
/*
* If there was a fatal machine check we should have
diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index 6a99535..7e8e07b 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -100,53 +100,6 @@
return find_matching_signature(mc, csig, cpf);
}
-/*
- * Given CPU signature and a microcode patch, this function finds if the
- * microcode patch has matching family and model with the CPU.
- *
- * %true - if there's a match
- * %false - otherwise
- */
-static bool microcode_matches(struct microcode_header_intel *mc_header,
- unsigned long sig)
-{
- unsigned long total_size = get_totalsize(mc_header);
- unsigned long data_size = get_datasize(mc_header);
- struct extended_sigtable *ext_header;
- unsigned int fam_ucode, model_ucode;
- struct extended_signature *ext_sig;
- unsigned int fam, model;
- int ext_sigcount, i;
-
- fam = x86_family(sig);
- model = x86_model(sig);
-
- fam_ucode = x86_family(mc_header->sig);
- model_ucode = x86_model(mc_header->sig);
-
- if (fam == fam_ucode && model == model_ucode)
- return true;
-
- /* Look for ext. headers: */
- if (total_size <= data_size + MC_HEADER_SIZE)
- return false;
-
- ext_header = (void *) mc_header + data_size + MC_HEADER_SIZE;
- ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
- ext_sigcount = ext_header->count;
-
- for (i = 0; i < ext_sigcount; i++) {
- fam_ucode = x86_family(ext_sig->sig);
- model_ucode = x86_model(ext_sig->sig);
-
- if (fam == fam_ucode && model == model_ucode)
- return true;
-
- ext_sig++;
- }
- return false;
-}
-
static struct ucode_patch *memdup_patch(void *data, unsigned int size)
{
struct ucode_patch *p;
@@ -164,7 +117,7 @@
return p;
}
-static void save_microcode_patch(void *data, unsigned int size)
+static void save_microcode_patch(struct ucode_cpu_info *uci, void *data, unsigned int size)
{
struct microcode_header_intel *mc_hdr, *mc_saved_hdr;
struct ucode_patch *iter, *tmp, *p = NULL;
@@ -210,6 +163,9 @@
if (!p)
return;
+ if (!find_matching_signature(p->data, uci->cpu_sig.sig, uci->cpu_sig.pf))
+ return;
+
/*
* Save for early loading. On 32-bit, that needs to be a physical
* address as the APs are running from physical addresses, before
@@ -344,13 +300,14 @@
size -= mc_size;
- if (!microcode_matches(mc_header, uci->cpu_sig.sig)) {
+ if (!find_matching_signature(data, uci->cpu_sig.sig,
+ uci->cpu_sig.pf)) {
data += mc_size;
continue;
}
if (save) {
- save_microcode_patch(data, mc_size);
+ save_microcode_patch(uci, data, mc_size);
goto next;
}
@@ -483,14 +440,14 @@
* Save this microcode patch. It will be loaded early when a CPU is
* hot-added or resumes.
*/
-static void save_mc_for_early(u8 *mc, unsigned int size)
+static void save_mc_for_early(struct ucode_cpu_info *uci, u8 *mc, unsigned int size)
{
/* Synchronization during CPU hotplug. */
static DEFINE_MUTEX(x86_cpu_microcode_mutex);
mutex_lock(&x86_cpu_microcode_mutex);
- save_microcode_patch(mc, size);
+ save_microcode_patch(uci, mc, size);
show_saved_mc();
mutex_unlock(&x86_cpu_microcode_mutex);
@@ -935,7 +892,7 @@
* permanent memory. So it will be loaded early when a CPU is hot added
* or resumes.
*/
- save_mc_for_early(new_mc, new_mc_size);
+ save_mc_for_early(uci, new_mc, new_mc_size);
pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
cpu, new_rev, uci->cpu_sig.rev);
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index e5f4ee8..e8b5f1c 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -570,6 +570,8 @@
if (d) {
cpumask_set_cpu(cpu, &d->cpu_mask);
+ if (r->cache.arch_has_per_cpu_cfg)
+ rdt_domain_reconfigure_cdp(r);
return;
}
@@ -923,6 +925,7 @@
r->rid == RDT_RESOURCE_L2CODE) {
r->cache.arch_has_sparse_bitmaps = false;
r->cache.arch_has_empty_bitmaps = false;
+ r->cache.arch_has_per_cpu_cfg = false;
} else if (r->rid == RDT_RESOURCE_MBA) {
r->msr_base = MSR_IA32_MBA_THRTL_BASE;
r->msr_update = mba_wrmsr_intel;
@@ -943,6 +946,7 @@
r->rid == RDT_RESOURCE_L2CODE) {
r->cache.arch_has_sparse_bitmaps = true;
r->cache.arch_has_empty_bitmaps = true;
+ r->cache.arch_has_per_cpu_cfg = true;
} else if (r->rid == RDT_RESOURCE_MBA) {
r->msr_base = MSR_IA32_MBA_BW_BASE;
r->msr_update = mba_wrmsr_amd;
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 80fa997..f65d3c0 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -360,6 +360,8 @@
* executing entities
* @arch_has_sparse_bitmaps: True if a bitmap like f00f is valid.
* @arch_has_empty_bitmaps: True if the '0' bitmap is valid.
+ * @arch_has_per_cpu_cfg: True if QOS_CFG register for this cache
+ * level has CPU scope.
*/
struct rdt_cache {
unsigned int cbm_len;
@@ -369,6 +371,7 @@
unsigned int shareable_bits;
bool arch_has_sparse_bitmaps;
bool arch_has_empty_bitmaps;
+ bool arch_has_per_cpu_cfg;
};
/**
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index af323e2..f341842 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -507,6 +507,24 @@
return ret ?: nbytes;
}
+/**
+ * rdtgroup_remove - the helper to remove resource group safely
+ * @rdtgrp: resource group to remove
+ *
+ * On resource group creation via a mkdir, an extra kernfs_node reference is
+ * taken to ensure that the rdtgroup structure remains accessible for the
+ * rdtgroup_kn_unlock() calls where it is removed.
+ *
+ * Drop the extra reference here, then free the rdtgroup structure.
+ *
+ * Return: void
+ */
+static void rdtgroup_remove(struct rdtgroup *rdtgrp)
+{
+ kernfs_put(rdtgrp->kn);
+ kfree(rdtgrp);
+}
+
struct task_move_callback {
struct callback_head work;
struct rdtgroup *rdtgrp;
@@ -529,7 +547,7 @@
(rdtgrp->flags & RDT_DELETED)) {
current->closid = 0;
current->rmid = 0;
- kfree(rdtgrp);
+ rdtgroup_remove(rdtgrp);
}
if (unlikely(current->flags & PF_EXITING))
@@ -1769,7 +1787,6 @@
if (IS_ERR(kn_subdir))
return PTR_ERR(kn_subdir);
- kernfs_get(kn_subdir);
ret = rdtgroup_kn_set_ugid(kn_subdir);
if (ret)
return ret;
@@ -1792,7 +1809,6 @@
kn_info = kernfs_create_dir(parent_kn, "info", parent_kn->mode, NULL);
if (IS_ERR(kn_info))
return PTR_ERR(kn_info);
- kernfs_get(kn_info);
ret = rdtgroup_add_files(kn_info, RF_TOP_INFO);
if (ret)
@@ -1813,12 +1829,6 @@
goto out_destroy;
}
- /*
- * This extra ref will be put in kernfs_remove() and guarantees
- * that @rdtgrp->kn is always accessible.
- */
- kernfs_get(kn_info);
-
ret = rdtgroup_kn_set_ugid(kn_info);
if (ret)
goto out_destroy;
@@ -1847,12 +1857,6 @@
if (dest_kn)
*dest_kn = kn;
- /*
- * This extra ref will be put in kernfs_remove() and guarantees
- * that @rdtgrp->kn is always accessible.
- */
- kernfs_get(kn);
-
ret = rdtgroup_kn_set_ugid(kn);
if (ret)
goto out_destroy;
@@ -1905,8 +1909,13 @@
r_l = &rdt_resources_all[level];
list_for_each_entry(d, &r_l->domains, list) {
- /* Pick one CPU from each domain instance to update MSR */
- cpumask_set_cpu(cpumask_any(&d->cpu_mask), cpu_mask);
+ if (r_l->cache.arch_has_per_cpu_cfg)
+ /* Pick all the CPUs in the domain instance */
+ for_each_cpu(cpu, &d->cpu_mask)
+ cpumask_set_cpu(cpu, cpu_mask);
+ else
+ /* Pick one CPU from each domain instance to update MSR */
+ cpumask_set_cpu(cpumask_any(&d->cpu_mask), cpu_mask);
}
cpu = get_cpu();
/* Update QOS_CFG MSR on this cpu if it's in cpu_mask. */
@@ -2079,8 +2088,7 @@
rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED)
rdtgroup_pseudo_lock_remove(rdtgrp);
kernfs_unbreak_active_protection(kn);
- kernfs_put(rdtgrp->kn);
- kfree(rdtgrp);
+ rdtgroup_remove(rdtgrp);
} else {
kernfs_unbreak_active_protection(kn);
}
@@ -2139,13 +2147,11 @@
&kn_mongrp);
if (ret < 0)
goto out_info;
- kernfs_get(kn_mongrp);
ret = mkdir_mondata_all(rdtgroup_default.kn,
&rdtgroup_default, &kn_mondata);
if (ret < 0)
goto out_mongrp;
- kernfs_get(kn_mondata);
rdtgroup_default.mon.mon_data_kn = kn_mondata;
}
@@ -2357,7 +2363,7 @@
if (atomic_read(&sentry->waitcount) != 0)
sentry->flags = RDT_DELETED;
else
- kfree(sentry);
+ rdtgroup_remove(sentry);
}
}
@@ -2399,7 +2405,7 @@
if (atomic_read(&rdtgrp->waitcount) != 0)
rdtgrp->flags = RDT_DELETED;
else
- kfree(rdtgrp);
+ rdtgroup_remove(rdtgrp);
}
/* Notify online CPUs to update per cpu storage and PQR_ASSOC MSR */
update_closid_rmid(cpu_online_mask, &rdtgroup_default);
@@ -2499,11 +2505,6 @@
if (IS_ERR(kn))
return PTR_ERR(kn);
- /*
- * This extra ref will be put in kernfs_remove() and guarantees
- * that kn is always accessible.
- */
- kernfs_get(kn);
ret = rdtgroup_kn_set_ugid(kn);
if (ret)
goto out_destroy;
@@ -2838,8 +2839,8 @@
/*
* kernfs_remove() will drop the reference count on "kn" which
* will free it. But we still need it to stick around for the
- * rdtgroup_kn_unlock(kn} call below. Take one extra reference
- * here, which will be dropped inside rdtgroup_kn_unlock().
+ * rdtgroup_kn_unlock(kn) call. Take one extra reference here,
+ * which will be dropped by kernfs_put() in rdtgroup_remove().
*/
kernfs_get(kn);
@@ -2880,6 +2881,7 @@
out_idfree:
free_rmid(rdtgrp->mon.rmid);
out_destroy:
+ kernfs_put(rdtgrp->kn);
kernfs_remove(rdtgrp->kn);
out_free_rgrp:
kfree(rdtgrp);
@@ -2892,7 +2894,7 @@
{
kernfs_remove(rgrp->kn);
free_rmid(rgrp->mon.rmid);
- kfree(rgrp);
+ rdtgroup_remove(rgrp);
}
/*
@@ -3049,11 +3051,6 @@
WARN_ON(list_empty(&prdtgrp->mon.crdtgrp_list));
list_del(&rdtgrp->mon.crdtgrp_list);
- /*
- * one extra hold on this, will drop when we kfree(rdtgrp)
- * in rdtgroup_kn_unlock()
- */
- kernfs_get(kn);
kernfs_remove(rdtgrp->kn);
return 0;
@@ -3065,11 +3062,6 @@
rdtgrp->flags = RDT_DELETED;
list_del(&rdtgrp->rdtgroup_list);
- /*
- * one extra hold on this, will drop when we kfree(rdtgrp)
- * in rdtgroup_kn_unlock()
- */
- kernfs_get(kn);
kernfs_remove(rdtgrp->kn);
return 0;
}
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 25c06b6..97aa900 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -78,6 +78,9 @@
if (!user_mode(regs))
return copy_from_kernel_nofault(buf, (u8 *)src, nbytes);
+ /* The user space code from other tasks cannot be accessed. */
+ if (regs != task_pt_regs(current))
+ return -EPERM;
/*
* Make sure userspace isn't trying to trick us into dumping kernel
* memory by pointing the userspace instruction pointer at it.
@@ -85,6 +88,12 @@
if (__chk_range_not_ok(src, nbytes, TASK_SIZE_MAX))
return -EINVAL;
+ /*
+ * Even if named copy_from_user_nmi() this can be invoked from
+ * other contexts and will not try to resolve a pagefault, which is
+ * the correct thing to do here as this code can be called from any
+ * context.
+ */
return copy_from_user_nmi(buf, (void __user *)src, nbytes);
}
@@ -115,13 +124,19 @@
u8 opcodes[OPCODE_BUFSIZE];
unsigned long prologue = regs->ip - PROLOGUE_SIZE;
- if (copy_code(regs, opcodes, prologue, sizeof(opcodes))) {
- printk("%sCode: Unable to access opcode bytes at RIP 0x%lx.\n",
- loglvl, prologue);
- } else {
+ switch (copy_code(regs, opcodes, prologue, sizeof(opcodes))) {
+ case 0:
printk("%sCode: %" __stringify(PROLOGUE_SIZE) "ph <%02x> %"
__stringify(EPILOGUE_SIZE) "ph\n", loglvl, opcodes,
opcodes[PROLOGUE_SIZE], opcodes + PROLOGUE_SIZE + 1);
+ break;
+ case -EPERM:
+ /* No access to the user space stack of other tasks. Ignore. */
+ break;
+ default:
+ printk("%sCode: Unable to access opcode bytes at RIP 0x%lx.\n",
+ loglvl, prologue);
+ break;
}
}
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 7eb2a1c..3c41773 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -161,6 +161,21 @@
/* Setup early boot stage 4-/5-level pagetables. */
addq phys_base(%rip), %rax
+
+ /*
+ * For SEV guests: Verify that the C-bit is correct. A malicious
+ * hypervisor could lie about the C-bit position to perform a ROP
+ * attack on the guest by writing to the unencrypted stack and wait for
+ * the next RET instruction.
+ * %rsi carries pointer to realmode data and is callee-clobbered. Save
+ * and restore it.
+ */
+ pushq %rsi
+ movq %rax, %rdi
+ call sev_verify_cbit
+ popq %rsi
+
+ /* Switch to new page-table */
movq %rax, %cr3
/* Ensure I am executing from virtual addresses */
@@ -279,6 +294,7 @@
SYM_CODE_END(secondary_startup_64)
#include "verify_cpu.S"
+#include "sev_verify_cbit.S"
#ifdef CONFIG_HOTPLUG_CPU
/*
diff --git a/arch/x86/kernel/perf_regs.c b/arch/x86/kernel/perf_regs.c
index bb7e113..f9e5352 100644
--- a/arch/x86/kernel/perf_regs.c
+++ b/arch/x86/kernel/perf_regs.c
@@ -101,8 +101,7 @@
}
void perf_get_regs_user(struct perf_regs *regs_user,
- struct pt_regs *regs,
- struct pt_regs *regs_user_copy)
+ struct pt_regs *regs)
{
regs_user->regs = task_pt_regs(current);
regs_user->abi = perf_reg_abi(current);
@@ -129,12 +128,20 @@
return PERF_SAMPLE_REGS_ABI_64;
}
+static DEFINE_PER_CPU(struct pt_regs, nmi_user_regs);
+
void perf_get_regs_user(struct perf_regs *regs_user,
- struct pt_regs *regs,
- struct pt_regs *regs_user_copy)
+ struct pt_regs *regs)
{
+ struct pt_regs *regs_user_copy = this_cpu_ptr(&nmi_user_regs);
struct pt_regs *user_regs = task_pt_regs(current);
+ if (!in_nmi()) {
+ regs_user->regs = user_regs;
+ regs_user->abi = perf_reg_abi(current);
+ return;
+ }
+
/*
* If we're in an NMI that interrupted task_pt_regs setup, then
* we can't sample user regs at all. This check isn't really
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index ba4593a..145a7ac 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -685,7 +685,7 @@
*/
void __cpuidle default_idle(void)
{
- safe_halt();
+ raw_safe_halt();
}
#if defined(CONFIG_APM_MODULE) || defined(CONFIG_HALTPOLL_CPUIDLE_MODULE)
EXPORT_SYMBOL(default_idle);
@@ -736,6 +736,8 @@
/*
* AMD Erratum 400 aware idle routine. We handle it the same way as C3 power
* states (local apic timer and TSC stop).
+ *
+ * XXX this function is completely buggered vs RCU and tracing.
*/
static void amd_e400_idle(void)
{
@@ -757,9 +759,9 @@
* The switch back from broadcast mode needs to be called with
* interrupts disabled.
*/
- local_irq_disable();
+ raw_local_irq_disable();
tick_broadcast_exit();
- local_irq_enable();
+ raw_local_irq_enable();
}
/*
@@ -801,9 +803,9 @@
if (!need_resched())
__sti_mwait(0, 0);
else
- local_irq_enable();
+ raw_local_irq_enable();
} else {
- local_irq_enable();
+ raw_local_irq_enable();
}
__current_clr_polling();
}
diff --git a/arch/x86/kernel/sev-es-shared.c b/arch/x86/kernel/sev-es-shared.c
index 5f83cca..7d04b35 100644
--- a/arch/x86/kernel/sev-es-shared.c
+++ b/arch/x86/kernel/sev-es-shared.c
@@ -178,6 +178,32 @@
goto fail;
regs->dx = val >> 32;
+ /*
+ * This is a VC handler and the #VC is only raised when SEV-ES is
+ * active, which means SEV must be active too. Do sanity checks on the
+ * CPUID results to make sure the hypervisor does not trick the kernel
+ * into the no-sev path. This could map sensitive data unencrypted and
+ * make it accessible to the hypervisor.
+ *
+ * In particular, check for:
+ * - Hypervisor CPUID bit
+ * - Availability of CPUID leaf 0x8000001f
+ * - SEV CPUID bit.
+ *
+ * The hypervisor might still report the wrong C-bit position, but this
+ * can't be checked here.
+ */
+
+ if ((fn == 1 && !(regs->cx & BIT(31))))
+ /* Hypervisor bit */
+ goto fail;
+ else if (fn == 0x80000000 && (regs->ax < 0x8000001f))
+ /* SEV leaf check */
+ goto fail;
+ else if ((fn == 0x8000001f && !(regs->ax & BIT(1))))
+ /* SEV bit */
+ goto fail;
+
/* Skip over the CPUID two-byte opcode */
regs->ip += 2;
diff --git a/arch/x86/kernel/sev-es.c b/arch/x86/kernel/sev-es.c
index 4a96726..0bd1a0f 100644
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -374,8 +374,8 @@
return ES_EXCEPTION;
}
-static bool vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
- unsigned long vaddr, phys_addr_t *paddr)
+static enum es_result vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
+ unsigned long vaddr, phys_addr_t *paddr)
{
unsigned long va = (unsigned long)vaddr;
unsigned int level;
@@ -394,15 +394,19 @@
if (user_mode(ctxt->regs))
ctxt->fi.error_code |= X86_PF_USER;
- return false;
+ return ES_EXCEPTION;
}
+ if (WARN_ON_ONCE(pte_val(*pte) & _PAGE_ENC))
+ /* Emulated MMIO to/from encrypted memory not supported */
+ return ES_UNSUPPORTED;
+
pa = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT;
pa |= va & ~page_level_mask(level);
*paddr = pa;
- return true;
+ return ES_OK;
}
/* Include code shared with pre-decompression boot stage */
@@ -731,6 +735,7 @@
{
u64 exit_code, exit_info_1, exit_info_2;
unsigned long ghcb_pa = __pa(ghcb);
+ enum es_result res;
phys_addr_t paddr;
void __user *ref;
@@ -740,11 +745,12 @@
exit_code = read ? SVM_VMGEXIT_MMIO_READ : SVM_VMGEXIT_MMIO_WRITE;
- if (!vc_slow_virt_to_phys(ghcb, ctxt, (unsigned long)ref, &paddr)) {
- if (!read)
+ res = vc_slow_virt_to_phys(ghcb, ctxt, (unsigned long)ref, &paddr);
+ if (res != ES_OK) {
+ if (res == ES_EXCEPTION && !read)
ctxt->fi.error_code |= X86_PF_WRITE;
- return ES_EXCEPTION;
+ return res;
}
exit_info_1 = paddr;
diff --git a/arch/x86/kernel/sev_verify_cbit.S b/arch/x86/kernel/sev_verify_cbit.S
new file mode 100644
index 0000000..ee04941
--- /dev/null
+++ b/arch/x86/kernel/sev_verify_cbit.S
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * sev_verify_cbit.S - Code for verification of the C-bit position reported
+ * by the Hypervisor when running with SEV enabled.
+ *
+ * Copyright (c) 2020 Joerg Roedel (jroedel@suse.de)
+ *
+ * sev_verify_cbit() is called before switching to a new long-mode page-table
+ * at boot.
+ *
+ * Verify that the C-bit position is correct by writing a random value to
+ * an encrypted memory location while on the current page-table. Then it
+ * switches to the new page-table to verify the memory content is still the
+ * same. After that it switches back to the current page-table and when the
+ * check succeeded it returns. If the check failed the code invalidates the
+ * stack pointer and goes into a hlt loop. The stack-pointer is invalidated to
+ * make sure no interrupt or exception can get the CPU out of the hlt loop.
+ *
+ * New page-table pointer is expected in %rdi (first parameter)
+ *
+ */
+SYM_FUNC_START(sev_verify_cbit)
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+ /* First check if a C-bit was detected */
+ movq sme_me_mask(%rip), %rsi
+ testq %rsi, %rsi
+ jz 3f
+
+ /* sme_me_mask != 0 could mean SME or SEV - Check also for SEV */
+ movq sev_status(%rip), %rsi
+ testq %rsi, %rsi
+ jz 3f
+
+ /* Save CR4 in %rsi */
+ movq %cr4, %rsi
+
+ /* Disable Global Pages */
+ movq %rsi, %rdx
+ andq $(~X86_CR4_PGE), %rdx
+ movq %rdx, %cr4
+
+ /*
+ * Verified that running under SEV - now get a random value using
+ * RDRAND. This instruction is mandatory when running as an SEV guest.
+ *
+ * Don't bail out of the loop if RDRAND returns errors. It is better to
+ * prevent forward progress than to work with a non-random value here.
+ */
+1: rdrand %rdx
+ jnc 1b
+
+ /* Store value to memory and keep it in %rdx */
+ movq %rdx, sev_check_data(%rip)
+
+ /* Backup current %cr3 value to restore it later */
+ movq %cr3, %rcx
+
+ /* Switch to new %cr3 - This might unmap the stack */
+ movq %rdi, %cr3
+
+ /*
+ * Compare value in %rdx with memory location. If C-bit is incorrect
+ * this would read the encrypted data and make the check fail.
+ */
+ cmpq %rdx, sev_check_data(%rip)
+
+ /* Restore old %cr3 */
+ movq %rcx, %cr3
+
+ /* Restore previous CR4 */
+ movq %rsi, %cr4
+
+ /* Check CMPQ result */
+ je 3f
+
+ /*
+ * The check failed, prevent any forward progress to prevent ROP
+ * attacks, invalidate the stack and go into a hlt loop.
+ */
+ xorq %rsp, %rsp
+ subq $0x1000, %rsp
+2: hlt
+ jmp 2b
+3:
+#endif
+ /* Return page-table pointer */
+ movq %rdi, %rax
+ ret
+SYM_FUNC_END(sev_verify_cbit)
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 992fb14..ae64f98 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -514,16 +514,10 @@
if (!tboot_enabled())
return 0;
- if (intel_iommu_tboot_noforce)
- return 1;
-
- if (no_iommu || swiotlb || dmar_disabled)
+ if (no_iommu || dmar_disabled)
pr_warn("Forcing Intel-IOMMU to enabled\n");
dmar_disabled = 0;
-#ifdef CONFIG_SWIOTLB
- swiotlb = 0;
-#endif
no_iommu = 0;
return 1;
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 3fdaa04..138bdb1 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -255,12 +255,13 @@
static bool is_prefix_bad(struct insn *insn)
{
+ insn_byte_t p;
int i;
- for (i = 0; i < insn->prefixes.nbytes; i++) {
+ for_each_insn_prefix(insn, i, p) {
insn_attr_t attr;
- attr = inat_get_opcode_attribute(insn->prefixes.bytes[i]);
+ attr = inat_get_opcode_attribute(p);
switch (attr) {
case INAT_MAKE_PREFIX(INAT_PFX_ES):
case INAT_MAKE_PREFIX(INAT_PFX_CS):
@@ -715,6 +716,7 @@
static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
{
u8 opc1 = OPCODE1(insn);
+ insn_byte_t p;
int i;
switch (opc1) {
@@ -746,8 +748,8 @@
* Intel and AMD behavior differ in 64-bit mode: Intel ignores 66 prefix.
* No one uses these insns, reject any branch insns with such prefix.
*/
- for (i = 0; i < insn->prefixes.nbytes; i++) {
- if (insn->prefixes.bytes[i] == 0x66)
+ for_each_insn_prefix(insn, i, p) {
+ if (p == 0x66)
return -ENOTSUPP;
}
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 06a278b..83637a2 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -90,6 +90,20 @@
return 0;
}
+void kvm_update_pv_runtime(struct kvm_vcpu *vcpu)
+{
+ struct kvm_cpuid_entry2 *best;
+
+ best = kvm_find_cpuid_entry(vcpu, KVM_CPUID_FEATURES, 0);
+
+ /*
+ * save the feature bitmap to avoid cpuid lookup for every PV
+ * operation
+ */
+ if (best)
+ vcpu->arch.pv_cpuid.features = best->eax;
+}
+
void kvm_update_cpuid_runtime(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
@@ -124,13 +138,6 @@
(best->eax & (1 << KVM_FEATURE_PV_UNHALT)))
best->eax &= ~(1 << KVM_FEATURE_PV_UNHALT);
- /*
- * save the feature bitmap to avoid cpuid lookup for every PV
- * operation
- */
- if (best)
- vcpu->arch.pv_cpuid.features = best->eax;
-
if (!kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT)) {
best = kvm_find_cpuid_entry(vcpu, 0x1, 0);
if (best)
@@ -162,6 +169,8 @@
vcpu->arch.guest_supported_xcr0 =
(best->eax | ((u64)best->edx << 32)) & supported_xcr0;
+ kvm_update_pv_runtime(vcpu);
+
vcpu->arch.maxphyaddr = cpuid_query_maxphyaddr(vcpu);
kvm_mmu_reset_context(vcpu);
@@ -169,6 +178,8 @@
vcpu->arch.cr4_guest_rsvd_bits =
__cr4_reserved_bits(guest_cpuid_has, vcpu);
+ vcpu->arch.cr3_lm_rsvd_bits = rsvd_bits(cpuid_maxphyaddr(vcpu), 63);
+
/* Invoke the vendor callback only after the above state is updated. */
kvm_x86_ops.vcpu_after_set_cpuid(vcpu);
}
@@ -672,7 +683,9 @@
edx.split.num_counters_fixed = min(cap.num_counters_fixed, MAX_FIXED_COUNTERS);
edx.split.bit_width_fixed = cap.bit_width_fixed;
- edx.split.reserved = 0;
+ edx.split.anythread_deprecated = 1;
+ edx.split.reserved1 = 0;
+ edx.split.reserved2 = 0;
entry->eax = eax.full;
entry->ebx = cap.events_mask;
diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h
index bf85779..f7a6e8f 100644
--- a/arch/x86/kvm/cpuid.h
+++ b/arch/x86/kvm/cpuid.h
@@ -11,6 +11,7 @@
void kvm_set_cpu_caps(void);
void kvm_update_cpuid_runtime(struct kvm_vcpu *vcpu);
+void kvm_update_pv_runtime(struct kvm_vcpu *vcpu);
struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
u32 function, u32 index);
int kvm_dev_ioctl_get_cpuid(struct kvm_cpuid2 *cpuid,
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 0d917eb..56cae1f 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -4046,6 +4046,12 @@
return X86EMUL_CONTINUE;
}
+static int em_clflushopt(struct x86_emulate_ctxt *ctxt)
+{
+ /* emulating clflushopt regardless of cpuid */
+ return X86EMUL_CONTINUE;
+}
+
static int em_movsxd(struct x86_emulate_ctxt *ctxt)
{
ctxt->dst.val = (s32) ctxt->src.val;
@@ -4585,7 +4591,7 @@
};
static const struct gprefix pfx_0f_ae_7 = {
- I(SrcMem | ByteOp, em_clflush), N, N, N,
+ I(SrcMem | ByteOp, em_clflush), I(SrcMem | ByteOp, em_clflushopt), N, N,
};
static const struct group_dual group15 = { {
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index 99d118f..814698e 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -40,29 +40,10 @@
* check if there is pending interrupt from
* non-APIC source without intack.
*/
-static int kvm_cpu_has_extint(struct kvm_vcpu *v)
-{
- u8 accept = kvm_apic_accept_pic_intr(v);
-
- if (accept) {
- if (irqchip_split(v->kvm))
- return pending_userspace_extint(v);
- else
- return v->kvm->arch.vpic->output;
- } else
- return 0;
-}
-
-/*
- * check if there is injectable interrupt:
- * when virtual interrupt delivery enabled,
- * interrupt from apic will handled by hardware,
- * we don't need to check it here.
- */
-int kvm_cpu_has_injectable_intr(struct kvm_vcpu *v)
+int kvm_cpu_has_extint(struct kvm_vcpu *v)
{
/*
- * FIXME: interrupt.injected represents an interrupt that it's
+ * FIXME: interrupt.injected represents an interrupt whose
* side-effects have already been applied (e.g. bit from IRR
* already moved to ISR). Therefore, it is incorrect to rely
* on interrupt.injected to know if there is a pending
@@ -75,6 +56,23 @@
if (!lapic_in_kernel(v))
return v->arch.interrupt.injected;
+ if (!kvm_apic_accept_pic_intr(v))
+ return 0;
+
+ if (irqchip_split(v->kvm))
+ return pending_userspace_extint(v);
+ else
+ return v->kvm->arch.vpic->output;
+}
+
+/*
+ * check if there is injectable interrupt:
+ * when virtual interrupt delivery enabled,
+ * interrupt from apic will handled by hardware,
+ * we don't need to check it here.
+ */
+int kvm_cpu_has_injectable_intr(struct kvm_vcpu *v)
+{
if (kvm_cpu_has_extint(v))
return 1;
@@ -91,20 +89,6 @@
*/
int kvm_cpu_has_interrupt(struct kvm_vcpu *v)
{
- /*
- * FIXME: interrupt.injected represents an interrupt that it's
- * side-effects have already been applied (e.g. bit from IRR
- * already moved to ISR). Therefore, it is incorrect to rely
- * on interrupt.injected to know if there is a pending
- * interrupt in the user-mode LAPIC.
- * This leads to nVMX/nSVM not be able to distinguish
- * if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on
- * pending interrupt or should re-inject an injected
- * interrupt.
- */
- if (!lapic_in_kernel(v))
- return v->arch.interrupt.injected;
-
if (kvm_cpu_has_extint(v))
return 1;
@@ -118,16 +102,21 @@
*/
static int kvm_cpu_get_extint(struct kvm_vcpu *v)
{
- if (kvm_cpu_has_extint(v)) {
- if (irqchip_split(v->kvm)) {
- int vector = v->arch.pending_external_vector;
-
- v->arch.pending_external_vector = -1;
- return vector;
- } else
- return kvm_pic_read_irq(v->kvm); /* PIC */
- } else
+ if (!kvm_cpu_has_extint(v)) {
+ WARN_ON(!lapic_in_kernel(v));
return -1;
+ }
+
+ if (!lapic_in_kernel(v))
+ return v->arch.interrupt.nr;
+
+ if (irqchip_split(v->kvm)) {
+ int vector = v->arch.pending_external_vector;
+
+ v->arch.pending_external_vector = -1;
+ return vector;
+ } else
+ return kvm_pic_read_irq(v->kvm); /* PIC */
}
/*
@@ -135,13 +124,7 @@
*/
int kvm_cpu_get_interrupt(struct kvm_vcpu *v)
{
- int vector;
-
- if (!lapic_in_kernel(v))
- return v->arch.interrupt.nr;
-
- vector = kvm_cpu_get_extint(v);
-
+ int vector = kvm_cpu_get_extint(v);
if (vector != -1)
return vector; /* PIC */
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 105e785..86c33d5 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2465,7 +2465,7 @@
struct kvm_lapic *apic = vcpu->arch.apic;
u32 ppr;
- if (!kvm_apic_hw_enabled(apic))
+ if (!kvm_apic_present(vcpu))
return -1;
__apic_update_ppr(apic, &ppr);
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 1f96adf..7a6ae9e 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -856,12 +856,14 @@
} else {
rmap_printk("pte_list_add: %p %llx many->many\n", spte, *spte);
desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
- while (desc->sptes[PTE_LIST_EXT-1] && desc->more) {
- desc = desc->more;
+ while (desc->sptes[PTE_LIST_EXT-1]) {
count += PTE_LIST_EXT;
- }
- if (desc->sptes[PTE_LIST_EXT-1]) {
- desc->more = mmu_alloc_pte_list_desc(vcpu);
+
+ if (!desc->more) {
+ desc->more = mmu_alloc_pte_list_desc(vcpu);
+ desc = desc->more;
+ break;
+ }
desc = desc->more;
}
for (i = 0; desc->sptes[i]; ++i)
@@ -3515,7 +3517,7 @@
{
u64 sptes[PT64_ROOT_MAX_LEVEL];
struct rsvd_bits_validate *rsvd_check;
- int root = vcpu->arch.mmu->root_level;
+ int root = vcpu->arch.mmu->shadow_root_level;
int leaf;
int level;
bool reserved = false;
diff --git a/arch/x86/kvm/mmu/spte.c b/arch/x86/kvm/mmu/spte.c
index fcac2ca..c51ad54 100644
--- a/arch/x86/kvm/mmu/spte.c
+++ b/arch/x86/kvm/mmu/spte.c
@@ -40,8 +40,8 @@
WARN_ON(gen & ~MMIO_SPTE_GEN_MASK);
BUILD_BUG_ON((MMIO_SPTE_GEN_HIGH_MASK | MMIO_SPTE_GEN_LOW_MASK) & SPTE_SPECIAL_MASK);
- mask = (gen << MMIO_SPTE_GEN_LOW_START) & MMIO_SPTE_GEN_LOW_MASK;
- mask |= (gen << MMIO_SPTE_GEN_HIGH_START) & MMIO_SPTE_GEN_HIGH_MASK;
+ mask = (gen << MMIO_SPTE_GEN_LOW_SHIFT) & MMIO_SPTE_GEN_LOW_MASK;
+ mask |= (gen << MMIO_SPTE_GEN_HIGH_SHIFT) & MMIO_SPTE_GEN_HIGH_MASK;
return mask;
}
diff --git a/arch/x86/kvm/mmu/spte.h b/arch/x86/kvm/mmu/spte.h
index 5c75a45..2b3a30b 100644
--- a/arch/x86/kvm/mmu/spte.h
+++ b/arch/x86/kvm/mmu/spte.h
@@ -56,11 +56,11 @@
#define SPTE_MMU_WRITEABLE (1ULL << (PT_FIRST_AVAIL_BITS_SHIFT + 1))
/*
- * Due to limited space in PTEs, the MMIO generation is a 19 bit subset of
+ * Due to limited space in PTEs, the MMIO generation is a 18 bit subset of
* the memslots generation and is derived as follows:
*
* Bits 0-8 of the MMIO generation are propagated to spte bits 3-11
- * Bits 9-18 of the MMIO generation are propagated to spte bits 52-61
+ * Bits 9-17 of the MMIO generation are propagated to spte bits 54-62
*
* The KVM_MEMSLOT_GEN_UPDATE_IN_PROGRESS flag is intentionally not included in
* the MMIO generation number, as doing so would require stealing a bit from
@@ -69,18 +69,29 @@
* requires a full MMU zap). The flag is instead explicitly queried when
* checking for MMIO spte cache hits.
*/
-#define MMIO_SPTE_GEN_MASK GENMASK_ULL(17, 0)
#define MMIO_SPTE_GEN_LOW_START 3
#define MMIO_SPTE_GEN_LOW_END 11
-#define MMIO_SPTE_GEN_LOW_MASK GENMASK_ULL(MMIO_SPTE_GEN_LOW_END, \
- MMIO_SPTE_GEN_LOW_START)
#define MMIO_SPTE_GEN_HIGH_START PT64_SECOND_AVAIL_BITS_SHIFT
#define MMIO_SPTE_GEN_HIGH_END 62
+
+#define MMIO_SPTE_GEN_LOW_MASK GENMASK_ULL(MMIO_SPTE_GEN_LOW_END, \
+ MMIO_SPTE_GEN_LOW_START)
#define MMIO_SPTE_GEN_HIGH_MASK GENMASK_ULL(MMIO_SPTE_GEN_HIGH_END, \
MMIO_SPTE_GEN_HIGH_START)
+#define MMIO_SPTE_GEN_LOW_BITS (MMIO_SPTE_GEN_LOW_END - MMIO_SPTE_GEN_LOW_START + 1)
+#define MMIO_SPTE_GEN_HIGH_BITS (MMIO_SPTE_GEN_HIGH_END - MMIO_SPTE_GEN_HIGH_START + 1)
+
+/* remember to adjust the comment above as well if you change these */
+static_assert(MMIO_SPTE_GEN_LOW_BITS == 9 && MMIO_SPTE_GEN_HIGH_BITS == 9);
+
+#define MMIO_SPTE_GEN_LOW_SHIFT (MMIO_SPTE_GEN_LOW_START - 0)
+#define MMIO_SPTE_GEN_HIGH_SHIFT (MMIO_SPTE_GEN_HIGH_START - MMIO_SPTE_GEN_LOW_BITS)
+
+#define MMIO_SPTE_GEN_MASK GENMASK_ULL(MMIO_SPTE_GEN_LOW_BITS + MMIO_SPTE_GEN_HIGH_BITS - 1, 0)
+
extern u64 __read_mostly shadow_nx_mask;
extern u64 __read_mostly shadow_x_mask; /* mutual exclusive with nx_mask */
extern u64 __read_mostly shadow_user_mask;
@@ -228,8 +239,8 @@
{
u64 gen;
- gen = (spte & MMIO_SPTE_GEN_LOW_MASK) >> MMIO_SPTE_GEN_LOW_START;
- gen |= (spte & MMIO_SPTE_GEN_HIGH_MASK) >> MMIO_SPTE_GEN_HIGH_START;
+ gen = (spte & MMIO_SPTE_GEN_LOW_MASK) >> MMIO_SPTE_GEN_LOW_SHIFT;
+ gen |= (spte & MMIO_SPTE_GEN_HIGH_MASK) >> MMIO_SPTE_GEN_HIGH_SHIFT;
return gen;
}
diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
index 27e381c..84c8f06 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -49,7 +49,14 @@
{
struct kvm_mmu_page *sp;
+ if (!kvm->arch.tdp_mmu_enabled)
+ return false;
+ if (WARN_ON(!VALID_PAGE(hpa)))
+ return false;
+
sp = to_shadow_page(hpa);
+ if (WARN_ON(!sp))
+ return false;
return sp->tdp_mmu_page && sp->root_count;
}
@@ -59,7 +66,7 @@
void kvm_tdp_mmu_free_root(struct kvm *kvm, struct kvm_mmu_page *root)
{
- gfn_t max_gfn = 1ULL << (boot_cpu_data.x86_phys_bits - PAGE_SHIFT);
+ gfn_t max_gfn = 1ULL << (shadow_phys_bits - PAGE_SHIFT);
lockdep_assert_held(&kvm->mmu_lock);
@@ -449,7 +456,7 @@
void kvm_tdp_mmu_zap_all(struct kvm *kvm)
{
- gfn_t max_gfn = 1ULL << (boot_cpu_data.x86_phys_bits - PAGE_SHIFT);
+ gfn_t max_gfn = 1ULL << (shadow_phys_bits - PAGE_SHIFT);
bool flush;
flush = kvm_tdp_mmu_zap_gfn_range(kvm, 0, max_gfn);
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index c0b1410..566f4d1 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -642,8 +642,8 @@
* Its safe to read more than we are asked, caller should ensure that
* destination has enough space.
*/
- src_paddr = round_down(src_paddr, 16);
offset = src_paddr & 15;
+ src_paddr = round_down(src_paddr, 16);
sz = round_up(sz + offset, 16);
return __sev_issue_dbg_cmd(kvm, src_paddr, dst_paddr, sz, err, false);
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 2f32fd0..da7eb4a 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -530,12 +530,12 @@
static void svm_cpu_uninit(int cpu)
{
- struct svm_cpu_data *sd = per_cpu(svm_data, raw_smp_processor_id());
+ struct svm_cpu_data *sd = per_cpu(svm_data, cpu);
if (!sd)
return;
- per_cpu(svm_data, raw_smp_processor_id()) = NULL;
+ per_cpu(svm_data, cpu) = NULL;
kfree(sd->sev_vmcbs);
__free_page(sd->save_area);
kfree(sd);
@@ -1309,8 +1309,10 @@
svm->avic_is_running = true;
svm->msrpm = svm_vcpu_alloc_msrpm();
- if (!svm->msrpm)
+ if (!svm->msrpm) {
+ err = -ENOMEM;
goto error_free_vmcb_page;
+ }
svm_vcpu_init_msrpm(vcpu, svm->msrpm);
@@ -3741,6 +3743,7 @@
static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
+ struct kvm_cpuid_entry2 *best;
vcpu->arch.xsaves_enabled = guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
boot_cpu_has(X86_FEATURE_XSAVE) &&
@@ -3753,6 +3756,13 @@
/* Check again if INVPCID interception if required */
svm_check_invpcid(svm);
+ /* For sev guests, the memory encryption bit is not reserved in CR3. */
+ if (sev_guest(vcpu->kvm)) {
+ best = kvm_find_cpuid_entry(vcpu, 0x8000001F, 0);
+ if (best)
+ vcpu->arch.cr3_lm_rsvd_bits &= ~(1UL << (best->ebx & 0x3f));
+ }
+
if (!kvm_vcpu_apicv_active(vcpu))
return;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f5ede41..e545a8a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -255,11 +255,10 @@
/*
* When called, it means the previous get/set msr reached an invalid msr.
- * Return 0 if we want to ignore/silent this failed msr access, or 1 if we want
- * to fail the caller.
+ * Return true if we want to ignore/silent this failed msr access.
*/
-static int kvm_msr_ignored_check(struct kvm_vcpu *vcpu, u32 msr,
- u64 data, bool write)
+static bool kvm_msr_ignored_check(struct kvm_vcpu *vcpu, u32 msr,
+ u64 data, bool write)
{
const char *op = write ? "wrmsr" : "rdmsr";
@@ -268,11 +267,11 @@
kvm_pr_unimpl("ignored %s: 0x%x data 0x%llx\n",
op, msr, data);
/* Mask the error */
- return 0;
+ return true;
} else {
kvm_debug_ratelimited("unhandled %s: 0x%x data 0x%llx\n",
op, msr, data);
- return -ENOENT;
+ return false;
}
}
@@ -1042,7 +1041,7 @@
}
if (is_long_mode(vcpu) &&
- (cr3 & rsvd_bits(cpuid_maxphyaddr(vcpu), 63)))
+ (cr3 & vcpu->arch.cr3_lm_rsvd_bits))
return 1;
else if (is_pae_paging(vcpu) &&
!load_pdptrs(vcpu, vcpu->arch.walk_mmu, cr3))
@@ -1416,7 +1415,8 @@
if (r == KVM_MSR_RET_INVALID) {
/* Unconditionally clear the output for simplicity */
*data = 0;
- r = kvm_msr_ignored_check(vcpu, index, 0, false);
+ if (kvm_msr_ignored_check(vcpu, index, 0, false))
+ r = 0;
}
if (r)
@@ -1540,7 +1540,7 @@
struct msr_data msr;
if (!host_initiated && !kvm_msr_allowed(vcpu, index, KVM_MSR_FILTER_WRITE))
- return -EPERM;
+ return KVM_MSR_RET_FILTERED;
switch (index) {
case MSR_FS_BASE:
@@ -1581,7 +1581,8 @@
int ret = __kvm_set_msr(vcpu, index, data, host_initiated);
if (ret == KVM_MSR_RET_INVALID)
- ret = kvm_msr_ignored_check(vcpu, index, data, true);
+ if (kvm_msr_ignored_check(vcpu, index, data, true))
+ ret = 0;
return ret;
}
@@ -1599,7 +1600,7 @@
int ret;
if (!host_initiated && !kvm_msr_allowed(vcpu, index, KVM_MSR_FILTER_READ))
- return -EPERM;
+ return KVM_MSR_RET_FILTERED;
msr.index = index;
msr.host_initiated = host_initiated;
@@ -1618,7 +1619,8 @@
if (ret == KVM_MSR_RET_INVALID) {
/* Unconditionally clear *data for simplicity */
*data = 0;
- ret = kvm_msr_ignored_check(vcpu, index, 0, false);
+ if (kvm_msr_ignored_check(vcpu, index, 0, false))
+ ret = 0;
}
return ret;
@@ -1662,9 +1664,9 @@
static u64 kvm_msr_reason(int r)
{
switch (r) {
- case -ENOENT:
+ case KVM_MSR_RET_INVALID:
return KVM_MSR_EXIT_REASON_UNKNOWN;
- case -EPERM:
+ case KVM_MSR_RET_FILTERED:
return KVM_MSR_EXIT_REASON_FILTER;
default:
return KVM_MSR_EXIT_REASON_INVAL;
@@ -1965,7 +1967,7 @@
struct kvm_arch *ka = &vcpu->kvm->arch;
if (vcpu->vcpu_id == 0 && !host_initiated) {
- if (ka->boot_vcpu_runs_old_kvmclock && old_msr)
+ if (ka->boot_vcpu_runs_old_kvmclock != old_msr)
kvm_make_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu);
ka->boot_vcpu_runs_old_kvmclock = old_msr;
@@ -3063,9 +3065,9 @@
/* Values other than LBR and BTF are vendor-specific,
thus reserved and should throw a #GP */
return 1;
- }
- vcpu_unimpl(vcpu, "%s: MSR_IA32_DEBUGCTLMSR 0x%llx, nop\n",
- __func__, data);
+ } else if (report_ignored_msrs)
+ vcpu_unimpl(vcpu, "%s: MSR_IA32_DEBUGCTLMSR 0x%llx, nop\n",
+ __func__, data);
break;
case 0x200 ... 0x2ff:
return kvm_mtrr_set_msr(vcpu, msr, data);
@@ -3463,29 +3465,63 @@
msr_info->data = vcpu->arch.efer;
break;
case MSR_KVM_WALL_CLOCK:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_CLOCKSOURCE))
+ return 1;
+
+ msr_info->data = vcpu->kvm->arch.wall_clock;
+ break;
case MSR_KVM_WALL_CLOCK_NEW:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_CLOCKSOURCE2))
+ return 1;
+
msr_info->data = vcpu->kvm->arch.wall_clock;
break;
case MSR_KVM_SYSTEM_TIME:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_CLOCKSOURCE))
+ return 1;
+
+ msr_info->data = vcpu->arch.time;
+ break;
case MSR_KVM_SYSTEM_TIME_NEW:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_CLOCKSOURCE2))
+ return 1;
+
msr_info->data = vcpu->arch.time;
break;
case MSR_KVM_ASYNC_PF_EN:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_ASYNC_PF))
+ return 1;
+
msr_info->data = vcpu->arch.apf.msr_en_val;
break;
case MSR_KVM_ASYNC_PF_INT:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_ASYNC_PF_INT))
+ return 1;
+
msr_info->data = vcpu->arch.apf.msr_int_val;
break;
case MSR_KVM_ASYNC_PF_ACK:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_ASYNC_PF))
+ return 1;
+
msr_info->data = 0;
break;
case MSR_KVM_STEAL_TIME:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_STEAL_TIME))
+ return 1;
+
msr_info->data = vcpu->arch.st.msr_val;
break;
case MSR_KVM_PV_EOI_EN:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_PV_EOI))
+ return 1;
+
msr_info->data = vcpu->arch.pv_eoi.msr_val;
break;
case MSR_KVM_POLL_CONTROL:
+ if (!guest_pv_has(vcpu, KVM_FEATURE_POLL_CONTROL))
+ return 1;
+
msr_info->data = vcpu->arch.msr_kvm_poll_control;
break;
case MSR_IA32_P5_MC_ADDR:
@@ -4015,21 +4051,23 @@
static int kvm_cpu_accept_dm_intr(struct kvm_vcpu *vcpu)
{
+ /*
+ * We can accept userspace's request for interrupt injection
+ * as long as we have a place to store the interrupt number.
+ * The actual injection will happen when the CPU is able to
+ * deliver the interrupt.
+ */
+ if (kvm_cpu_has_extint(vcpu))
+ return false;
+
+ /* Acknowledging ExtINT does not happen if LINT0 is masked. */
return (!lapic_in_kernel(vcpu) ||
kvm_apic_accept_pic_intr(vcpu));
}
-/*
- * if userspace requested an interrupt window, check that the
- * interrupt window is open.
- *
- * No need to exit to userspace if we already have an interrupt queued.
- */
static int kvm_vcpu_ready_for_interrupt_injection(struct kvm_vcpu *vcpu)
{
return kvm_arch_interrupt_allowed(vcpu) &&
- !kvm_cpu_has_interrupt(vcpu) &&
- !kvm_event_needs_reinjection(vcpu) &&
kvm_cpu_accept_dm_intr(vcpu);
}
@@ -4575,6 +4613,8 @@
case KVM_CAP_ENFORCE_PV_FEATURE_CPUID:
vcpu->arch.pv_cpuid.enforce = cap->args[0];
+ if (vcpu->arch.pv_cpuid.enforce)
+ kvm_update_pv_runtime(vcpu);
return 0;
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 3900ab0..e7ca622 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -376,7 +376,13 @@
int kvm_handle_invpcid(struct kvm_vcpu *vcpu, unsigned long type, gva_t gva);
bool kvm_msr_allowed(struct kvm_vcpu *vcpu, u32 index, u32 type);
-#define KVM_MSR_RET_INVALID 2
+/*
+ * Internal error codes that are used to indicate that MSR emulation encountered
+ * an error that should result in #GP in the guest, unless userspace
+ * handles it.
+ */
+#define KVM_MSR_RET_INVALID 2 /* in-kernel MSR emulation #GP condition */
+#define KVM_MSR_RET_FILTERED 3 /* #GP due to userspace MSR filter */
#define __cr4_reserved_bits(__cpu_has, __c) \
({ \
diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c
index 58f7fb9..4229950 100644
--- a/arch/x86/lib/insn-eval.c
+++ b/arch/x86/lib/insn-eval.c
@@ -63,13 +63,12 @@
*/
bool insn_has_rep_prefix(struct insn *insn)
{
+ insn_byte_t p;
int i;
insn_get_prefixes(insn);
- for (i = 0; i < insn->prefixes.nbytes; i++) {
- insn_byte_t p = insn->prefixes.bytes[i];
-
+ for_each_insn_prefix(insn, i, p) {
if (p == 0xf2 || p == 0xf3)
return true;
}
@@ -95,14 +94,15 @@
{
int idx = INAT_SEG_REG_DEFAULT;
int num_overrides = 0, i;
+ insn_byte_t p;
insn_get_prefixes(insn);
/* Look for any segment override prefixes. */
- for (i = 0; i < insn->prefixes.nbytes; i++) {
+ for_each_insn_prefix(insn, i, p) {
insn_attr_t attr;
- attr = inat_get_opcode_attribute(insn->prefixes.bytes[i]);
+ attr = inat_get_opcode_attribute(p);
switch (attr) {
case INAT_MAKE_PREFIX(INAT_PFX_CS):
idx = INAT_SEG_REG_CS;
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 037faac..1e299ac 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -16,8 +16,6 @@
* to a jmp to memcpy_erms which does the REP; MOVSB mem copy.
*/
-.weak memcpy
-
/*
* memcpy - Copy a memory block.
*
@@ -30,7 +28,7 @@
* rax original destination
*/
SYM_FUNC_START_ALIAS(__memcpy)
-SYM_FUNC_START_LOCAL(memcpy)
+SYM_FUNC_START_WEAK(memcpy)
ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
"jmp memcpy_erms", X86_FEATURE_ERMS
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index 7ff00ea..41902fe 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -24,9 +24,7 @@
* Output:
* rax: dest
*/
-.weak memmove
-
-SYM_FUNC_START_ALIAS(memmove)
+SYM_FUNC_START_WEAK(memmove)
SYM_FUNC_START(__memmove)
mov %rdi, %rax
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 9ff15ee..0bfd26e 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -6,8 +6,6 @@
#include <asm/alternative-asm.h>
#include <asm/export.h>
-.weak memset
-
/*
* ISO C memset - set a memory block to a byte value. This function uses fast
* string to get better performance than the original function. The code is
@@ -19,7 +17,7 @@
*
* rax original destination
*/
-SYM_FUNC_START_ALIAS(memset)
+SYM_FUNC_START_WEAK(memset)
SYM_FUNC_START(__memset)
/*
* Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended
diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
index efbb3de..bc08337 100644
--- a/arch/x86/mm/mem_encrypt.c
+++ b/arch/x86/mm/mem_encrypt.c
@@ -39,6 +39,7 @@
*/
u64 sme_me_mask __section(".data") = 0;
u64 sev_status __section(".data") = 0;
+u64 sev_check_data __section(".data") = 0;
EXPORT_SYMBOL(sme_me_mask);
DEFINE_STATIC_KEY_FALSE(sev_enable_key);
EXPORT_SYMBOL_GPL(sev_enable_key);
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 4414869..5eb4dc2 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -938,6 +938,7 @@
return meminfo_to_nid(&numa_reserved_meminfo, start);
}
+EXPORT_SYMBOL_GPL(phys_to_target_node);
int memory_add_physaddr_to_nid(u64 start)
{
@@ -947,4 +948,5 @@
nid = numa_meminfo.blk[0].nid;
return nid;
}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 8f5759d..e1e8d4e3 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -78,28 +78,30 @@
gfp_mask = GFP_KERNEL | __GFP_ZERO;
efi_pgd = (pgd_t *)__get_free_pages(gfp_mask, PGD_ALLOCATION_ORDER);
if (!efi_pgd)
- return -ENOMEM;
+ goto fail;
pgd = efi_pgd + pgd_index(EFI_VA_END);
p4d = p4d_alloc(&init_mm, pgd, EFI_VA_END);
- if (!p4d) {
- free_page((unsigned long)efi_pgd);
- return -ENOMEM;
- }
+ if (!p4d)
+ goto free_pgd;
pud = pud_alloc(&init_mm, p4d, EFI_VA_END);
- if (!pud) {
- if (pgtable_l5_enabled())
- free_page((unsigned long) pgd_page_vaddr(*pgd));
- free_pages((unsigned long)efi_pgd, PGD_ALLOCATION_ORDER);
- return -ENOMEM;
- }
+ if (!pud)
+ goto free_p4d;
efi_mm.pgd = efi_pgd;
mm_init_cpumask(&efi_mm);
init_new_context(NULL, &efi_mm);
return 0;
+
+free_p4d:
+ if (pgtable_l5_enabled())
+ free_page((unsigned long)pgd_page_vaddr(*pgd));
+free_pgd:
+ free_pages((unsigned long)efi_pgd, PGD_ALLOCATION_ORDER);
+fail:
+ return -ENOMEM;
}
/*
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 799f4eb..043c73d 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -93,10 +93,20 @@
void xen_uninit_lock_cpu(int cpu)
{
+ int irq;
+
if (!xen_pvspin)
return;
- unbind_from_irqhandler(per_cpu(lock_kicker_irq, cpu), NULL);
+ /*
+ * When booting the kernel with 'mitigations=auto,nosmt', the secondary
+ * CPUs are not activated, and lock_kicker_irq is not initialized.
+ */
+ irq = per_cpu(lock_kicker_irq, cpu);
+ if (irq == -1)
+ return;
+
+ unbind_from_irqhandler(irq, NULL);
per_cpu(lock_kicker_irq, cpu) = -1;
kfree(per_cpu(irq_name, cpu));
per_cpu(irq_name, cpu) = NULL;
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index fa054a1..4dc04e6 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -69,7 +69,7 @@
*/
#define VMALLOC_START (XCHAL_KSEG_CACHED_VADDR - 0x10000000)
#define VMALLOC_END (VMALLOC_START + 0x07FEFFFF)
-#define TLBTEMP_BASE_1 (VMALLOC_END + 1)
+#define TLBTEMP_BASE_1 (VMALLOC_START + 0x08000000)
#define TLBTEMP_BASE_2 (TLBTEMP_BASE_1 + DCACHE_WAY_SIZE)
#if 2 * DCACHE_WAY_SIZE > ICACHE_WAY_SIZE
#define TLBTEMP_SIZE (2 * DCACHE_WAY_SIZE)
diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h
index b975811..5c9fb80 100644
--- a/arch/xtensa/include/asm/uaccess.h
+++ b/arch/xtensa/include/asm/uaccess.h
@@ -302,7 +302,7 @@
return -EFAULT;
}
#else
-long strncpy_from_user(char *dst, const char *src, long count);
+long strncpy_from_user(char *dst, const char __user *src, long count);
#endif
/*
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index 5835406..085b8c7 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -70,8 +70,10 @@
kvaddr = TLBTEMP_BASE_1 +
(page_to_phys(page) & DCACHE_ALIAS_MASK);
+ preempt_disable();
__invalidate_dcache_page_alias(kvaddr,
page_to_phys(page));
+ preempt_enable();
}
}
}
@@ -156,6 +158,7 @@
if (!alias && !mapping)
return;
+ preempt_disable();
virt = TLBTEMP_BASE_1 + (phys & DCACHE_ALIAS_MASK);
__flush_invalidate_dcache_page_alias(virt, phys);
@@ -166,6 +169,7 @@
if (mapping)
__invalidate_icache_page_alias(virt, phys);
+ preempt_enable();
}
/* There shouldn't be an entry in the cache for this page anymore. */
@@ -199,8 +203,10 @@
unsigned long phys = page_to_phys(pfn_to_page(pfn));
unsigned long virt = TLBTEMP_BASE_1 + (address & DCACHE_ALIAS_MASK);
+ preempt_disable();
__flush_invalidate_dcache_page_alias(virt, phys);
__invalidate_icache_page_alias(virt, phys);
+ preempt_enable();
}
EXPORT_SYMBOL(local_flush_cache_page);
@@ -227,11 +233,13 @@
unsigned long phys = page_to_phys(page);
unsigned long tmp;
+ preempt_disable();
tmp = TLBTEMP_BASE_1 + (phys & DCACHE_ALIAS_MASK);
__flush_invalidate_dcache_page_alias(tmp, phys);
tmp = TLBTEMP_BASE_1 + (addr & DCACHE_ALIAS_MASK);
__flush_invalidate_dcache_page_alias(tmp, phys);
__invalidate_icache_page_alias(tmp, phys);
+ preempt_enable();
clear_bit(PG_arch_1, &page->flags);
}
@@ -265,7 +273,9 @@
if (alias) {
unsigned long t = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
+ preempt_disable();
__flush_invalidate_dcache_page_alias(t, phys);
+ preempt_enable();
}
/* Copy data */
@@ -280,9 +290,11 @@
if (alias) {
unsigned long t = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
+ preempt_disable();
__flush_invalidate_dcache_range((unsigned long) dst, len);
if ((vma->vm_flags & VM_EXEC) != 0)
__invalidate_icache_page_alias(t, phys);
+ preempt_enable();
} else if ((vma->vm_flags & VM_EXEC) != 0) {
__flush_dcache_range((unsigned long)dst,len);
@@ -304,7 +316,9 @@
if (alias) {
unsigned long t = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK);
+ preempt_disable();
__flush_invalidate_dcache_page_alias(t, phys);
+ preempt_enable();
}
memcpy(dst, src, len);
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index c6fc83e..8731b7a 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -89,8 +89,8 @@
/* set highmem page free */
for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE,
&range_start, &range_end, NULL) {
- unsigned long start = PHYS_PFN(range_start);
- unsigned long end = PHYS_PFN(range_end);
+ unsigned long start = PFN_UP(range_start);
+ unsigned long end = PFN_DOWN(range_end);
/* Ignore complete lowmem entries */
if (end <= max_low)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index bcf5e45..97b7c28 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -144,7 +144,7 @@
static inline unsigned get_max_io_size(struct request_queue *q,
struct bio *bio)
{
- unsigned sectors = blk_max_size_offset(q, bio->bi_iter.bi_sector);
+ unsigned sectors = blk_max_size_offset(q, bio->bi_iter.bi_sector, 0);
unsigned max_sectors = sectors;
unsigned pbs = queue_physical_block_size(q) >> SECTOR_SHIFT;
unsigned lbs = queue_logical_block_size(q) >> SECTOR_SHIFT;
diff --git a/drivers/Makefile b/drivers/Makefile
index c0cd1b9..5762280 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -145,6 +145,7 @@
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_BCMA) += bcma/
obj-$(CONFIG_VHOST_RING) += vhost/
+obj-$(CONFIG_VHOST_IOTLB) += vhost/
obj-$(CONFIG_VHOST) += vhost/
obj-$(CONFIG_VLYNQ) += vlynq/
obj-$(CONFIG_GREYBUS) += greybus/
diff --git a/drivers/accessibility/speakup/main.c b/drivers/accessibility/speakup/main.c
index be79b21..4801966 100644
--- a/drivers/accessibility/speakup/main.c
+++ b/drivers/accessibility/speakup/main.c
@@ -357,7 +357,6 @@
mark_cut_flag = 0;
synth_printf("%s\n", spk_msg_get(MSG_CUT));
- speakup_clear_selection();
ret = speakup_set_selection(tty);
switch (ret) {
diff --git a/drivers/accessibility/speakup/selection.c b/drivers/accessibility/speakup/selection.c
index 032f326..7df7afa 100644
--- a/drivers/accessibility/speakup/selection.c
+++ b/drivers/accessibility/speakup/selection.c
@@ -22,13 +22,6 @@
struct tty_struct *tty;
};
-void speakup_clear_selection(void)
-{
- console_lock();
- clear_selection();
- console_unlock();
-}
-
static void __speakup_set_selection(struct work_struct *work)
{
struct speakup_selection_work *ssw =
@@ -51,6 +44,10 @@
goto unref;
}
+ console_lock();
+ clear_selection();
+ console_unlock();
+
set_selection_kernel(&sel, tty);
unref:
diff --git a/drivers/accessibility/speakup/speakup.h b/drivers/accessibility/speakup/speakup.h
index 74fe49c..33594f5 100644
--- a/drivers/accessibility/speakup/speakup.h
+++ b/drivers/accessibility/speakup/speakup.h
@@ -70,7 +70,6 @@
void speakup_start_ttys(void);
void synth_buffer_add(u16 ch);
void synth_buffer_clear(void);
-void speakup_clear_selection(void);
int speakup_set_selection(struct tty_struct *tty);
void speakup_cancel_selection(void);
int speakup_paste_selection(struct tty_struct *tty);
diff --git a/drivers/accessibility/speakup/spk_ttyio.c b/drivers/accessibility/speakup/spk_ttyio.c
index a831ff6..6284aff 100644
--- a/drivers/accessibility/speakup/spk_ttyio.c
+++ b/drivers/accessibility/speakup/spk_ttyio.c
@@ -47,9 +47,12 @@
{
struct spk_ldisc_data *ldisc_data;
+ if (tty != speakup_tty)
+ /* Somebody tried to use this line discipline outside speakup */
+ return -ENODEV;
+
if (!tty->ops->write)
return -EOPNOTSUPP;
- speakup_tty = tty;
ldisc_data = kmalloc(sizeof(*ldisc_data), GFP_KERNEL);
if (!ldisc_data)
@@ -57,7 +60,7 @@
init_completion(&ldisc_data->completion);
ldisc_data->buf_free = true;
- speakup_tty->disc_data = ldisc_data;
+ tty->disc_data = ldisc_data;
return 0;
}
@@ -181,9 +184,25 @@
tty_unlock(tty);
+ mutex_lock(&speakup_tty_mutex);
+ speakup_tty = tty;
ret = tty_set_ldisc(tty, N_SPEAKUP);
if (ret)
- pr_err("speakup: Failed to set N_SPEAKUP on tty\n");
+ speakup_tty = NULL;
+ mutex_unlock(&speakup_tty_mutex);
+
+ if (!ret)
+ /* Success */
+ return 0;
+
+ pr_err("speakup: Failed to set N_SPEAKUP on tty\n");
+
+ tty_lock(tty);
+ if (tty->ops->close)
+ tty->ops->close(tty, NULL);
+ tty_unlock(tty);
+
+ tty_kclose(tty);
return ret;
}
@@ -298,11 +317,13 @@
struct spk_ldisc_data *ldisc_data = speakup_tty->disc_data;
char rv;
- if (wait_for_completion_timeout(&ldisc_data->completion,
+ if (!timeout) {
+ if (!try_wait_for_completion(&ldisc_data->completion))
+ return 0xff;
+ } else if (wait_for_completion_timeout(&ldisc_data->completion,
usecs_to_jiffies(timeout)) == 0) {
- if (timeout)
- pr_warn("spk_ttyio: timeout (%d) while waiting for input\n",
- timeout);
+ pr_warn("spk_ttyio: timeout (%d) while waiting for input\n",
+ timeout);
return 0xff;
}
diff --git a/drivers/accessibility/speakup/spk_types.h b/drivers/accessibility/speakup/spk_types.h
index 7398f11..91fca303 100644
--- a/drivers/accessibility/speakup/spk_types.h
+++ b/drivers/accessibility/speakup/spk_types.h
@@ -32,6 +32,10 @@
E_NEW_DEFAULT,
};
+/*
+ * Note: add new members at the end, speakupmap.h depends on the values of the
+ * enum starting from SPELL_DELAY (see inc_dec_var)
+ */
enum var_id_t {
VERSION = 0, SYNTH, SILENT, SYNTH_DIRECT,
KEYMAP, CHARS,
@@ -42,9 +46,9 @@
SAY_CONTROL, SAY_WORD_CTL, NO_INTERRUPT, KEY_ECHO,
SPELL_DELAY, PUNC_LEVEL, READING_PUNC,
ATTRIB_BLEEP, BLEEPS,
- RATE, PITCH, INFLECTION, VOL, TONE, PUNCT, VOICE, FREQUENCY, LANG,
+ RATE, PITCH, VOL, TONE, PUNCT, VOICE, FREQUENCY, LANG,
DIRECT, PAUSE,
- CAPS_START, CAPS_STOP, CHARTAB,
+ CAPS_START, CAPS_STOP, CHARTAB, INFLECTION,
MAXVARS
};
diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index bc96457..a322a7b 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -578,7 +578,7 @@
ACPI_VIDEO_FIRST_LEVEL - 1 - bqc_value;
level = device->brightness->levels[bqc_value +
- ACPI_VIDEO_FIRST_LEVEL];
+ ACPI_VIDEO_FIRST_LEVEL];
} else {
level = bqc_value;
}
@@ -990,8 +990,8 @@
goto out_free_levels;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "found %d brightness levels\n",
- br->count - ACPI_VIDEO_FIRST_LEVEL));
+ "found %d brightness levels\n",
+ br->count - ACPI_VIDEO_FIRST_LEVEL));
return 0;
out_free_levels:
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index 552fd9f..3294cc8 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -633,6 +633,10 @@
if (rc)
return rc;
+ /* IO space doesn't need mapping */
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO)
+ return 0;
+
if (!acpi_os_map_generic_address(reg))
return -ENXIO;
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 9929ff5..770d840 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -44,7 +44,7 @@
* iort_set_fwnode() - Create iort_fwnode and use it to register
* iommu data in the iort_fwnode_list
*
- * @node: IORT table node associated with the IOMMU
+ * @iort_node: IORT table node associated with the IOMMU
* @fwnode: fwnode associated with the IORT node
*
* Returns: 0 on success
@@ -673,7 +673,8 @@
/**
* iort_get_device_domain() - Find MSI domain related to a device
* @dev: The device.
- * @req_id: Requester ID for the device.
+ * @id: Requester ID for the device.
+ * @bus_token: irq domain bus token.
*
* Returns: the MSI domain for this device, NULL otherwise
*/
@@ -1136,7 +1137,7 @@
*
* @dev: device to configure
* @dma_addr: device DMA address result pointer
- * @size: DMA range size result pointer
+ * @dma_size: DMA range size result pointer
*/
void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
{
@@ -1526,6 +1527,7 @@
/**
* iort_add_platform_device() - Allocate a platform device for IORT node
* @node: Pointer to device ACPI IORT node
+ * @ops: Pointer to IORT device config struct
*
* Returns: 0 on success, <0 failure
*/
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index cab4af5..08ee1c7 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -987,7 +987,7 @@
*/
if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) ||
(test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) &&
- (battery->capacity_now <= battery->alarm)))
+ (battery->capacity_now <= battery->alarm)))
acpi_pm_wakeup_event(&battery->device->dev);
return result;
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 0761529..0d93a5e 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -89,7 +89,18 @@
*/
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
- DMI_MATCH(DMI_PRODUCT_NAME, "E2215T MD60198"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "E2215T"),
+ },
+ .driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
+ },
+ {
+ /*
+ * Medion Akoya E2228T, notification of the LID device only
+ * happens on close, not on open and _LID always returns closed.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "E2228T"),
},
.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
},
diff --git a/drivers/acpi/dptf/dptf_pch_fivr.c b/drivers/acpi/dptf/dptf_pch_fivr.c
index 4c1992f..5fca182 100644
--- a/drivers/acpi/dptf/dptf_pch_fivr.c
+++ b/drivers/acpi/dptf/dptf_pch_fivr.c
@@ -106,6 +106,7 @@
static const struct acpi_device_id pch_fivr_device_ids[] = {
{"INTC1045", 0},
+ {"INTC1049", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, pch_fivr_device_ids);
diff --git a/drivers/acpi/dptf/dptf_power.c b/drivers/acpi/dptf/dptf_power.c
index 0674130..a24d5d7 100644
--- a/drivers/acpi/dptf/dptf_power.c
+++ b/drivers/acpi/dptf/dptf_power.c
@@ -229,6 +229,8 @@
{"INT3532", 0},
{"INTC1047", 0},
{"INTC1050", 0},
+ {"INTC1060", 0},
+ {"INTC1061", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, int3407_device_ids);
diff --git a/drivers/acpi/dptf/int340x_thermal.c b/drivers/acpi/dptf/int340x_thermal.c
index 8d420c7..d14025a 100644
--- a/drivers/acpi/dptf/int340x_thermal.c
+++ b/drivers/acpi/dptf/int340x_thermal.c
@@ -25,10 +25,16 @@
{"INT340A"},
{"INT340B"},
{"INTC1040"},
+ {"INTC1041"},
{"INTC1043"},
{"INTC1044"},
{"INTC1045"},
+ {"INTC1046"},
{"INTC1047"},
+ {"INTC1048"},
+ {"INTC1049"},
+ {"INTC1060"},
+ {"INTC1061"},
{""},
};
diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c
index 1706439..92e59f4 100644
--- a/drivers/acpi/event.c
+++ b/drivers/acpi/event.c
@@ -31,7 +31,7 @@
event.type = type;
event.data = data;
return (blocking_notifier_call_chain(&acpi_chain_head, 0, (void *)&event)
- == NOTIFY_BAD) ? -EINVAL : 0;
+ == NOTIFY_BAD) ? -EINVAL : 0;
}
EXPORT_SYMBOL(acpi_notifier_call_chain);
diff --git a/drivers/acpi/evged.c b/drivers/acpi/evged.c
index b1a7f8d..fe6b679 100644
--- a/drivers/acpi/evged.c
+++ b/drivers/acpi/evged.c
@@ -101,7 +101,7 @@
switch (gsi) {
case 0 ... 255:
- sprintf(ev_name, "_%c%02hhX",
+ sprintf(ev_name, "_%c%02X",
trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index 6287338..66c3983 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -27,6 +27,7 @@
{"PNP0C0B", 0},
{"INT3404", 0},
{"INTC1044", 0},
+ {"INTC1048", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, fan_device_ids);
@@ -351,6 +352,7 @@
struct acpi_fan_fps *fps = &fan->fps[i];
snprintf(fps->name, ACPI_FPS_NAME_LEN, "state%d", i);
+ sysfs_attr_init(&fps->dev_attr.attr);
fps->dev_attr.show = show_state;
fps->dev_attr.store = NULL;
fps->dev_attr.attr.name = fps->name;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 43411a7..e3638ba 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -134,7 +134,7 @@
void acpi_power_add_remove_device(struct acpi_device *adev, bool add);
int acpi_power_wakeup_list_init(struct list_head *list, int *system_level);
int acpi_device_sleep_wake(struct acpi_device *dev,
- int enable, int sleep_state, int dev_state);
+ int enable, int sleep_state, int dev_state);
int acpi_power_get_inferred_state(struct acpi_device *device, int *state);
int acpi_power_on_resources(struct acpi_device *device, int state);
int acpi_power_transition(struct acpi_device *device, int state);
diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index 3a3c209..4426082 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -2175,10 +2175,10 @@
* these commands.
*/
enum nfit_aux_cmds {
- NFIT_CMD_TRANSLATE_SPA = 5,
- NFIT_CMD_ARS_INJECT_SET = 7,
- NFIT_CMD_ARS_INJECT_CLEAR = 8,
- NFIT_CMD_ARS_INJECT_GET = 9,
+ NFIT_CMD_TRANSLATE_SPA = 5,
+ NFIT_CMD_ARS_INJECT_SET = 7,
+ NFIT_CMD_ARS_INJECT_CLEAR = 8,
+ NFIT_CMD_ARS_INJECT_GET = 9,
};
static void acpi_nfit_init_dsms(struct acpi_nfit_desc *acpi_desc)
@@ -2632,7 +2632,7 @@
nfit_blk->bdw_offset = nfit_mem->bdw->offset;
mmio = &nfit_blk->mmio[BDW];
mmio->addr.base = devm_nvdimm_memremap(dev, nfit_mem->spa_bdw->address,
- nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
+ nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
if (!mmio->addr.base) {
dev_dbg(dev, "%s failed to map bdw\n",
nvdimm_name(nvdimm));
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index dea8a60..14ee631 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -175,7 +175,7 @@
* configure the IRQ assigned to this slot|dev|pin. The 'source_index'
* indicates which resource descriptor in the resource template (of
* the link device) this interrupt is allocated from.
- *
+ *
* NOTE: Don't query the Link Device for IRQ information at this time
* because Link Device enumeration may not have occurred yet
* (e.g. exists somewhere 'below' this _PRT entry in the ACPI
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 606da5d..fb4c563 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -6,8 +6,8 @@
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2002 Dominik Brodowski <devel@brodo.de>
*
- * TBD:
- * 1. Support more than one IRQ resource entry per link device (index).
+ * TBD:
+ * 1. Support more than one IRQ resource entry per link device (index).
* 2. Implement start/stop mechanism and use ACPI Bus Driver facilities
* for IRQ management (e.g. start()->_SRS).
*/
@@ -249,8 +249,8 @@
}
}
- /*
- * Query and parse _CRS to get the current IRQ assignment.
+ /*
+ * Query and parse _CRS to get the current IRQ assignment.
*/
status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS,
@@ -396,7 +396,7 @@
/*
* "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
* Link Devices to move the PIRQs around to minimize sharing.
- *
+ *
* "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
* that the BIOS has already set to active. This is necessary because
* ACPI has no automatic means of knowing what ISA IRQs are used. Note that
@@ -414,7 +414,7 @@
*
* Note that PCI IRQ routers have a list of possible IRQs,
* which may not include the IRQs this table says are available.
- *
+ *
* Since this heuristic can't tell the difference between a link
* that no device will attach to, vs. a link which may be shared
* by multiple active devices -- it is not optimal.
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 7ddd57a..95f23ac 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -173,7 +173,7 @@
{
if (!memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
!memcmp(f->oem_table_id, mcfg_oem_table_id,
- ACPI_OEM_TABLE_ID_SIZE) &&
+ ACPI_OEM_TABLE_ID_SIZE) &&
f->oem_revision == mcfg_oem_revision &&
f->segment == segment &&
resource_contains(&f->bus_range, bus_range))
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 837b875..8048da8 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -13,7 +13,7 @@
* 1. via "Device Specific (D-State) Control"
* 2. via "Power Resource Control".
* The code below deals with ACPI Power Resources control.
- *
+ *
* An ACPI "power resource object" represents a software controllable power
* plane, clock plane, or other resource depended on by a device.
*
@@ -645,7 +645,7 @@
* -ENODEV if the execution of either _DSW or _PSW has failed
*/
int acpi_device_sleep_wake(struct acpi_device *dev,
- int enable, int sleep_state, int dev_state)
+ int enable, int sleep_state, int dev_state)
{
union acpi_object in_arg[3];
struct acpi_object_list arg_list = { 3, in_arg };
@@ -690,7 +690,7 @@
/*
* Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
- * 1. Power on the power resources required for the wakeup device
+ * 1. Power on the power resources required for the wakeup device
* 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
* State Wake) for the device, if present
*/
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 5909e8f..b04a689 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -354,7 +354,7 @@
(u32) px->control, (u32) px->status));
/*
- * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+ * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
*/
if (!px->core_frequency ||
((u32)(px->core_frequency * 1000) !=
@@ -627,7 +627,7 @@
goto err_ret;
/*
- * Now that we have _PSD data from all CPUs, lets setup P-state
+ * Now that we have _PSD data from all CPUs, lets setup P-state
* domain info.
*/
for_each_possible_cpu(i) {
@@ -693,7 +693,7 @@
if (match_pdomain->domain != pdomain->domain)
continue;
- match_pr->performance->shared_type =
+ match_pr->performance->shared_type =
pr->performance->shared_type;
cpumask_copy(match_pr->performance->shared_cpu_map,
pr->performance->shared_cpu_map);
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index f158b8c..e6d9f4d 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -366,7 +366,7 @@
state_readers[i].mode,
ACPI_SBS_BATTERY,
state_readers[i].command,
- (u8 *)battery +
+ (u8 *)battery +
state_readers[i].offset);
if (result)
goto end;
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index 87b74e9..53c2862 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -176,7 +176,7 @@
EXPORT_SYMBOL_GPL(acpi_smbus_write);
int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
- smbus_alarm_callback callback, void *context)
+ smbus_alarm_callback callback, void *context)
{
mutex_lock(&hc->lock);
hc->callback = callback;
diff --git a/drivers/acpi/sbshc.h b/drivers/acpi/sbshc.h
index c3522bb..695c390 100644
--- a/drivers/acpi/sbshc.h
+++ b/drivers/acpi/sbshc.h
@@ -24,9 +24,9 @@
typedef void (*smbus_alarm_callback)(void *context);
extern int acpi_smbus_read(struct acpi_smb_hc *hc, u8 protocol, u8 address,
- u8 command, u8 * data);
+ u8 command, u8 *data);
extern int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 slave_address,
- u8 command, u8 * data, u8 length);
+ u8 command, u8 *data, u8 length);
extern int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
- smbus_alarm_callback callback, void *context);
+ smbus_alarm_callback callback, void *context);
extern int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc);
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index a896e5e..bc6a79e 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1453,7 +1453,7 @@
}
/**
- * acpi_dma_configure - Set-up DMA configuration for the device.
+ * acpi_dma_configure_id - Set-up DMA configuration for the device.
* @dev: The pointer to the device
* @attr: device dma attributes
* @input_id: input device id const value pointer
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 3a032af..4f5463b 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -178,14 +178,14 @@
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
},
},
- {
- .callback = video_detect_force_video,
- .ident = "ThinkPad X201T",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
- },
- },
+ {
+ .callback = video_detect_force_video,
+ .ident = "ThinkPad X201T",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
+ },
+ },
/* The native backlight controls do not work on some older machines */
{
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index f89dd9a..b02bf77 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -44,7 +44,7 @@
if (!dev->wakeup.flags.valid
|| sleep_state > (u32) dev->wakeup.sleep_state
|| !(device_may_wakeup(&dev->dev)
- || dev->wakeup.prepare_count))
+ || dev->wakeup.prepare_count))
continue;
if (device_may_wakeup(&dev->dev))
@@ -69,7 +69,7 @@
if (!dev->wakeup.flags.valid
|| sleep_state > (u32) dev->wakeup.sleep_state
|| !(device_may_wakeup(&dev->dev)
- || dev->wakeup.prepare_count))
+ || dev->wakeup.prepare_count))
continue;
acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 7af74fb..09ad73361 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -1706,6 +1706,8 @@
if (push_scqe(card, vc, scq, &scqe, skb) != 0) {
atomic_inc(&vcc->stats->tx_err);
+ dma_unmap_single(&card->pcidev->dev, NS_PRV_DMA(skb), skb->len,
+ DMA_TO_DEVICE);
dev_kfree_skb_any(skb);
return -EIO;
}
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 78114dd..d661ada 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -773,8 +773,7 @@
dev_dbg(link->consumer, "Dropping the link to %s\n",
dev_name(link->supplier));
- if (link->flags & DL_FLAG_PM_RUNTIME)
- pm_runtime_drop_link(link->consumer);
+ pm_runtime_drop_link(link);
list_del_rcu(&link->s_node);
list_del_rcu(&link->c_node);
@@ -788,8 +787,7 @@
dev_info(link->consumer, "Dropping the link to %s\n",
dev_name(link->supplier));
- if (link->flags & DL_FLAG_PM_RUNTIME)
- pm_runtime_drop_link(link->consumer);
+ pm_runtime_drop_link(link);
list_del(&link->s_node);
list_del(&link->c_node);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index b42229b..148e819 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -1117,6 +1117,8 @@
drv = dev->driver;
if (drv) {
+ pm_runtime_get_sync(dev);
+
while (device_links_busy(dev)) {
__device_driver_unlock(dev, parent);
@@ -1128,13 +1130,12 @@
* have released the driver successfully while this one
* was waiting, so check for that.
*/
- if (dev->driver != drv)
+ if (dev->driver != drv) {
+ pm_runtime_put(dev);
return;
+ }
}
- pm_runtime_get_sync(dev);
- pm_runtime_clean_up_links(dev);
-
driver_sysfs_remove(dev);
if (dev->bus)
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 6f605f7..bfda153 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -1643,42 +1643,6 @@
}
/**
- * pm_runtime_clean_up_links - Prepare links to consumers for driver removal.
- * @dev: Device whose driver is going to be removed.
- *
- * Check links from this device to any consumers and if any of them have active
- * runtime PM references to the device, drop the usage counter of the device
- * (as many times as needed).
- *
- * Links with the DL_FLAG_MANAGED flag unset are ignored.
- *
- * Since the device is guaranteed to be runtime-active at the point this is
- * called, nothing else needs to be done here.
- *
- * Moreover, this is called after device_links_busy() has returned 'false', so
- * the status of each link is guaranteed to be DL_STATE_SUPPLIER_UNBIND and
- * therefore rpm_active can't be manipulated concurrently.
- */
-void pm_runtime_clean_up_links(struct device *dev)
-{
- struct device_link *link;
- int idx;
-
- idx = device_links_read_lock();
-
- list_for_each_entry_rcu(link, &dev->links.consumers, s_node,
- device_links_read_lock_held()) {
- if (!(link->flags & DL_FLAG_MANAGED))
- continue;
-
- while (refcount_dec_not_one(&link->rpm_active))
- pm_runtime_put_noidle(dev);
- }
-
- device_links_read_unlock(idx);
-}
-
-/**
* pm_runtime_get_suppliers - Resume and reference-count supplier devices.
* @dev: Consumer device.
*/
@@ -1729,7 +1693,7 @@
spin_unlock_irq(&dev->power.lock);
}
-void pm_runtime_drop_link(struct device *dev)
+static void pm_runtime_drop_link_count(struct device *dev)
{
spin_lock_irq(&dev->power.lock);
WARN_ON(dev->power.links_count == 0);
@@ -1737,6 +1701,25 @@
spin_unlock_irq(&dev->power.lock);
}
+/**
+ * pm_runtime_drop_link - Prepare for device link removal.
+ * @link: Device link going away.
+ *
+ * Drop the link count of the consumer end of @link and decrement the supplier
+ * device's runtime PM usage counter as many times as needed to drop all of the
+ * PM runtime reference to it from the consumer.
+ */
+void pm_runtime_drop_link(struct device_link *link)
+{
+ if (!(link->flags & DL_FLAG_PM_RUNTIME))
+ return;
+
+ pm_runtime_drop_link_count(link->consumer);
+
+ while (refcount_dec_not_one(&link->rpm_active))
+ pm_runtime_put(link->supplier);
+}
+
static bool pm_runtime_need_not_resume(struct device *dev)
{
return atomic_read(&dev->power.usage_count) <= 1 &&
diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index 501e9da..9ebf539 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -132,73 +132,12 @@
#define BLKBACK_INVALID_HANDLE (~0)
-/* Number of free pages to remove on each call to gnttab_free_pages */
-#define NUM_BATCH_FREE_PAGES 10
-
static inline bool persistent_gnt_timeout(struct persistent_gnt *persistent_gnt)
{
return pgrant_timeout && (jiffies - persistent_gnt->last_used >=
HZ * pgrant_timeout);
}
-static inline int get_free_page(struct xen_blkif_ring *ring, struct page **page)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ring->free_pages_lock, flags);
- if (list_empty(&ring->free_pages)) {
- BUG_ON(ring->free_pages_num != 0);
- spin_unlock_irqrestore(&ring->free_pages_lock, flags);
- return gnttab_alloc_pages(1, page);
- }
- BUG_ON(ring->free_pages_num == 0);
- page[0] = list_first_entry(&ring->free_pages, struct page, lru);
- list_del(&page[0]->lru);
- ring->free_pages_num--;
- spin_unlock_irqrestore(&ring->free_pages_lock, flags);
-
- return 0;
-}
-
-static inline void put_free_pages(struct xen_blkif_ring *ring, struct page **page,
- int num)
-{
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&ring->free_pages_lock, flags);
- for (i = 0; i < num; i++)
- list_add(&page[i]->lru, &ring->free_pages);
- ring->free_pages_num += num;
- spin_unlock_irqrestore(&ring->free_pages_lock, flags);
-}
-
-static inline void shrink_free_pagepool(struct xen_blkif_ring *ring, int num)
-{
- /* Remove requested pages in batches of NUM_BATCH_FREE_PAGES */
- struct page *page[NUM_BATCH_FREE_PAGES];
- unsigned int num_pages = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&ring->free_pages_lock, flags);
- while (ring->free_pages_num > num) {
- BUG_ON(list_empty(&ring->free_pages));
- page[num_pages] = list_first_entry(&ring->free_pages,
- struct page, lru);
- list_del(&page[num_pages]->lru);
- ring->free_pages_num--;
- if (++num_pages == NUM_BATCH_FREE_PAGES) {
- spin_unlock_irqrestore(&ring->free_pages_lock, flags);
- gnttab_free_pages(num_pages, page);
- spin_lock_irqsave(&ring->free_pages_lock, flags);
- num_pages = 0;
- }
- }
- spin_unlock_irqrestore(&ring->free_pages_lock, flags);
- if (num_pages != 0)
- gnttab_free_pages(num_pages, page);
-}
-
#define vaddr(page) ((unsigned long)pfn_to_kaddr(page_to_pfn(page)))
static int do_block_io_op(struct xen_blkif_ring *ring, unsigned int *eoi_flags);
@@ -331,7 +270,8 @@
unmap_data.count = segs_to_unmap;
BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
- put_free_pages(ring, pages, segs_to_unmap);
+ gnttab_page_cache_put(&ring->free_pages, pages,
+ segs_to_unmap);
segs_to_unmap = 0;
}
@@ -371,7 +311,8 @@
if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
unmap_data.count = segs_to_unmap;
BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
- put_free_pages(ring, pages, segs_to_unmap);
+ gnttab_page_cache_put(&ring->free_pages, pages,
+ segs_to_unmap);
segs_to_unmap = 0;
}
kfree(persistent_gnt);
@@ -379,7 +320,7 @@
if (segs_to_unmap > 0) {
unmap_data.count = segs_to_unmap;
BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
- put_free_pages(ring, pages, segs_to_unmap);
+ gnttab_page_cache_put(&ring->free_pages, pages, segs_to_unmap);
}
}
@@ -664,9 +605,10 @@
/* Shrink the free pages pool if it is too large. */
if (time_before(jiffies, blkif->buffer_squeeze_end))
- shrink_free_pagepool(ring, 0);
+ gnttab_page_cache_shrink(&ring->free_pages, 0);
else
- shrink_free_pagepool(ring, max_buffer_pages);
+ gnttab_page_cache_shrink(&ring->free_pages,
+ max_buffer_pages);
if (log_stats && time_after(jiffies, ring->st_print))
print_stats(ring);
@@ -697,7 +639,7 @@
ring->persistent_gnt_c = 0;
/* Since we are shutting down remove all pages from the buffer */
- shrink_free_pagepool(ring, 0 /* All */);
+ gnttab_page_cache_shrink(&ring->free_pages, 0 /* All */);
}
static unsigned int xen_blkbk_unmap_prepare(
@@ -736,7 +678,7 @@
but is this the best way to deal with this? */
BUG_ON(result);
- put_free_pages(ring, data->pages, data->count);
+ gnttab_page_cache_put(&ring->free_pages, data->pages, data->count);
make_response(ring, pending_req->id,
pending_req->operation, pending_req->status);
free_req(ring, pending_req);
@@ -803,7 +745,8 @@
if (invcount) {
ret = gnttab_unmap_refs(unmap, NULL, unmap_pages, invcount);
BUG_ON(ret);
- put_free_pages(ring, unmap_pages, invcount);
+ gnttab_page_cache_put(&ring->free_pages, unmap_pages,
+ invcount);
}
pages += batch;
num -= batch;
@@ -850,7 +793,8 @@
pages[i]->page = persistent_gnt->page;
pages[i]->persistent_gnt = persistent_gnt;
} else {
- if (get_free_page(ring, &pages[i]->page))
+ if (gnttab_page_cache_get(&ring->free_pages,
+ &pages[i]->page))
goto out_of_memory;
addr = vaddr(pages[i]->page);
pages_to_gnt[segs_to_map] = pages[i]->page;
@@ -883,7 +827,8 @@
BUG_ON(new_map_idx >= segs_to_map);
if (unlikely(map[new_map_idx].status != 0)) {
pr_debug("invalid buffer -- could not remap it\n");
- put_free_pages(ring, &pages[seg_idx]->page, 1);
+ gnttab_page_cache_put(&ring->free_pages,
+ &pages[seg_idx]->page, 1);
pages[seg_idx]->handle = BLKBACK_INVALID_HANDLE;
ret |= 1;
goto next;
@@ -944,7 +889,7 @@
out_of_memory:
pr_alert("%s: out of memory\n", __func__);
- put_free_pages(ring, pages_to_gnt, segs_to_map);
+ gnttab_page_cache_put(&ring->free_pages, pages_to_gnt, segs_to_map);
for (i = last_map; i < num; i++)
pages[i]->handle = BLKBACK_INVALID_HANDLE;
return -ENOMEM;
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index c6ea5d3..a1b9df2 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -288,9 +288,7 @@
struct work_struct persistent_purge_work;
/* Buffer of free pages to map grant refs. */
- spinlock_t free_pages_lock;
- int free_pages_num;
- struct list_head free_pages;
+ struct gnttab_page_cache free_pages;
struct work_struct free_work;
/* Thread shutdown wait queue. */
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index f570556..76912c5 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -144,8 +144,7 @@
INIT_LIST_HEAD(&ring->pending_free);
INIT_LIST_HEAD(&ring->persistent_purge_list);
INIT_WORK(&ring->persistent_purge_work, xen_blkbk_unmap_purged_grants);
- spin_lock_init(&ring->free_pages_lock);
- INIT_LIST_HEAD(&ring->free_pages);
+ gnttab_page_cache_init(&ring->free_pages);
spin_lock_init(&ring->pending_free_lock);
init_waitqueue_head(&ring->pending_free_wq);
@@ -317,8 +316,7 @@
BUG_ON(atomic_read(&ring->persistent_gnt_in_use) != 0);
BUG_ON(!list_empty(&ring->persistent_purge_list));
BUG_ON(!RB_EMPTY_ROOT(&ring->persistent_gnts));
- BUG_ON(!list_empty(&ring->free_pages));
- BUG_ON(ring->free_pages_num != 0);
+ BUG_ON(ring->free_pages.num_pages != 0);
BUG_ON(ring->persistent_gnt_c != 0);
WARN_ON(i != (XEN_BLKIF_REQS_PER_PAGE * blkif->nr_ring_pages));
ring->active = false;
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index efb088d..92ecf1a 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -227,6 +227,9 @@
u32 sysc_mask, syss_done, rstval;
int syss_offset, error = 0;
+ if (ddata->cap->regbits->srst_shift < 0)
+ return 0;
+
syss_offset = ddata->offsets[SYSC_SYSSTATUS];
sysc_mask = BIT(ddata->cap->regbits->srst_shift);
@@ -970,9 +973,15 @@
return error;
}
}
- error = sysc_wait_softreset(ddata);
- if (error)
- dev_warn(ddata->dev, "OCP softreset timed out\n");
+ /*
+ * Some modules like i2c and hdq1w have unusable reset status unless
+ * the module reset quirk is enabled. Skip status check on enable.
+ */
+ if (!(ddata->cfg.quirks & SYSC_MODULE_QUIRK_ENA_RESETDONE)) {
+ error = sysc_wait_softreset(ddata);
+ if (error)
+ dev_warn(ddata->dev, "OCP softreset timed out\n");
+ }
if (ddata->cfg.quirks & SYSC_QUIRK_OPT_CLKS_IN_RESET)
sysc_disable_opt_clocks(ddata);
@@ -1373,17 +1382,17 @@
SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50030200, 0xffffffff,
SYSC_QUIRK_OPT_CLKS_NEEDED),
SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
- SYSC_MODULE_QUIRK_HDQ1W),
+ SYSC_MODULE_QUIRK_HDQ1W | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
- SYSC_MODULE_QUIRK_HDQ1W),
+ SYSC_MODULE_QUIRK_HDQ1W | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("i2c", 0, 0, 0x20, 0x10, 0x00000036, 0x000000ff,
- SYSC_MODULE_QUIRK_I2C),
+ SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("i2c", 0, 0, 0x20, 0x10, 0x0000003c, 0x000000ff,
- SYSC_MODULE_QUIRK_I2C),
+ SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("i2c", 0, 0, 0x20, 0x10, 0x00000040, 0x000000ff,
- SYSC_MODULE_QUIRK_I2C),
+ SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xfffff0f0,
- SYSC_MODULE_QUIRK_I2C),
+ SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE),
SYSC_QUIRK("gpu", 0x50000000, 0x14, -ENODEV, -ENODEV, 0x00010201, 0xffffffff, 0),
SYSC_QUIRK("gpu", 0x50000000, 0xfe00, 0xfe10, -ENODEV, 0x40000000 , 0xffffffff,
SYSC_MODULE_QUIRK_SGX),
@@ -2880,7 +2889,7 @@
if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) &&
(ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE))
- return -EBUSY;
+ return -ENXIO;
return 0;
}
diff --git a/drivers/char/tpm/eventlog/efi.c b/drivers/char/tpm/eventlog/efi.c
index 6bb023d..35229e5 100644
--- a/drivers/char/tpm/eventlog/efi.c
+++ b/drivers/char/tpm/eventlog/efi.c
@@ -41,6 +41,11 @@
log_size = log_tbl->size;
memunmap(log_tbl);
+ if (!log_size) {
+ pr_warn("UEFI TPM log area empty\n");
+ return -EIO;
+ }
+
log_tbl = memremap(efi.tpm_log, sizeof(*log_tbl) + log_size,
MEMREMAP_WB);
if (!log_tbl) {
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 0b21496..4ed6e66 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -27,6 +27,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/kernel.h>
+#include <linux/dmi.h>
#include "tpm.h"
#include "tpm_tis_core.h"
@@ -49,8 +50,8 @@
return container_of(data, struct tpm_tis_tcg_phy, priv);
}
-static bool interrupts = true;
-module_param(interrupts, bool, 0444);
+static int interrupts = -1;
+module_param(interrupts, int, 0444);
MODULE_PARM_DESC(interrupts, "Enable interrupts");
static bool itpm;
@@ -63,6 +64,28 @@
MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
#endif
+static int tpm_tis_disable_irq(const struct dmi_system_id *d)
+{
+ if (interrupts == -1) {
+ pr_notice("tpm_tis: %s detected: disabling interrupts.\n", d->ident);
+ interrupts = 0;
+ }
+
+ return 0;
+}
+
+static const struct dmi_system_id tpm_tis_dmi_table[] = {
+ {
+ .callback = tpm_tis_disable_irq,
+ .ident = "ThinkPad T490s",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T490s"),
+ },
+ },
+ {}
+};
+
#if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
static int has_hid(struct acpi_device *dev, const char *hid)
{
@@ -192,6 +215,8 @@
int irq = -1;
int rc;
+ dmi_check_system(tpm_tis_dmi_table);
+
rc = check_acpi_tpm2(dev);
if (rc)
return rc;
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index a2da8f7..1836cc5 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -435,12 +435,12 @@
/*
* Allocate DMA memory from ancestor. When a virtio
* device is created by remoteproc, the DMA memory is
- * associated with the grandparent device:
- * vdev => rproc => platform-dev.
+ * associated with the parent device:
+ * virtioY => remoteprocX#vdevYbuffer.
*/
- if (!vdev->dev.parent || !vdev->dev.parent->parent)
+ buf->dev = vdev->dev.parent;
+ if (!buf->dev)
goto free_buf;
- buf->dev = vdev->dev.parent->parent;
/* Increase device refcnt to avoid freeing it */
get_device(buf->dev);
diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index 3b393cb..3061896 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -5,8 +5,8 @@
depends on ARCH_MXC || COMPILE_TEST
config MXC_CLK_SCU
- tristate "IMX SCU clock"
- depends on ARCH_MXC || COMPILE_TEST
+ tristate
+ depends on ARCH_MXC
depends on IMX_SCU && HAVE_ARM_SMCCC
config CLK_IMX1
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 0de0be0..f358ad9 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -443,9 +443,9 @@
hws[IMX8MM_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mm_a53_core_sels, ARRAY_SIZE(imx8mm_a53_core_sels));
/* BUS */
- hws[IMX8MM_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mm_main_axi_sels, base + 0x8800);
+ hws[IMX8MM_CLK_MAIN_AXI] = imx8m_clk_hw_composite_bus_critical("main_axi", imx8mm_main_axi_sels, base + 0x8800);
hws[IMX8MM_CLK_ENET_AXI] = imx8m_clk_hw_composite_bus("enet_axi", imx8mm_enet_axi_sels, base + 0x8880);
- hws[IMX8MM_CLK_NAND_USDHC_BUS] = imx8m_clk_hw_composite_critical("nand_usdhc_bus", imx8mm_nand_usdhc_sels, base + 0x8900);
+ hws[IMX8MM_CLK_NAND_USDHC_BUS] = imx8m_clk_hw_composite_bus_critical("nand_usdhc_bus", imx8mm_nand_usdhc_sels, base + 0x8900);
hws[IMX8MM_CLK_VPU_BUS] = imx8m_clk_hw_composite_bus("vpu_bus", imx8mm_vpu_bus_sels, base + 0x8980);
hws[IMX8MM_CLK_DISP_AXI] = imx8m_clk_hw_composite_bus("disp_axi", imx8mm_disp_axi_sels, base + 0x8a00);
hws[IMX8MM_CLK_DISP_APB] = imx8m_clk_hw_composite_bus("disp_apb", imx8mm_disp_apb_sels, base + 0x8a80);
@@ -453,11 +453,11 @@
hws[IMX8MM_CLK_USB_BUS] = imx8m_clk_hw_composite_bus("usb_bus", imx8mm_usb_bus_sels, base + 0x8b80);
hws[IMX8MM_CLK_GPU_AXI] = imx8m_clk_hw_composite_bus("gpu_axi", imx8mm_gpu_axi_sels, base + 0x8c00);
hws[IMX8MM_CLK_GPU_AHB] = imx8m_clk_hw_composite_bus("gpu_ahb", imx8mm_gpu_ahb_sels, base + 0x8c80);
- hws[IMX8MM_CLK_NOC] = imx8m_clk_hw_composite_critical("noc", imx8mm_noc_sels, base + 0x8d00);
- hws[IMX8MM_CLK_NOC_APB] = imx8m_clk_hw_composite_critical("noc_apb", imx8mm_noc_apb_sels, base + 0x8d80);
+ hws[IMX8MM_CLK_NOC] = imx8m_clk_hw_composite_bus_critical("noc", imx8mm_noc_sels, base + 0x8d00);
+ hws[IMX8MM_CLK_NOC_APB] = imx8m_clk_hw_composite_bus_critical("noc_apb", imx8mm_noc_apb_sels, base + 0x8d80);
/* AHB */
- hws[IMX8MM_CLK_AHB] = imx8m_clk_hw_composite_critical("ahb", imx8mm_ahb_sels, base + 0x9000);
+ hws[IMX8MM_CLK_AHB] = imx8m_clk_hw_composite_bus_critical("ahb", imx8mm_ahb_sels, base + 0x9000);
hws[IMX8MM_CLK_AUDIO_AHB] = imx8m_clk_hw_composite_bus("audio_ahb", imx8mm_audio_ahb_sels, base + 0x9100);
/* IPG */
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index e984de5..f3c5e6c 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -431,7 +431,7 @@
hws[IMX8MN_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mn_a53_core_sels, ARRAY_SIZE(imx8mn_a53_core_sels));
/* BUS */
- hws[IMX8MN_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mn_main_axi_sels, base + 0x8800);
+ hws[IMX8MN_CLK_MAIN_AXI] = imx8m_clk_hw_composite_bus_critical("main_axi", imx8mn_main_axi_sels, base + 0x8800);
hws[IMX8MN_CLK_ENET_AXI