Merge tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull more parisc fixes from Helge Deller:
 "Fix a build error in stracktrace.c, fix resolving of addresses to
  function names in backtraces, fix single-stepping in assembly code and
  flush userspace pte's when using set_pte_at()"

* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/entry: fix trace test in syscall exit path
  parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
  parisc: Fix implicit declaration of function '__kernel_text_address'
  parisc: Fix backtrace to always include init funtion names
diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml
index b1f28d1..a41cd87 100644
--- a/Documentation/devicetree/bindings/arm/sti.yaml
+++ b/Documentation/devicetree/bindings/arm/sti.yaml
@@ -7,7 +7,7 @@
 title: ST STi Platforms Device Tree Bindings
 
 maintainers:
-  - Patrice Chotard <patrice.chotard@st.com>
+  - Patrice Chotard <patrice.chotard@foss.st.com>
 
 properties:
   $nodename:
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
index 8e711bd..ecb28e9 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -7,8 +7,8 @@
 title: STMicroelectronics STM32 ML-AHB interconnect bindings
 
 maintainers:
-  - Fabien Dessenne <fabien.dessenne@st.com>
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 description: |
   These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index 149afb5..6f846d6 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -7,8 +7,8 @@
 title: STMicroelectronics STM32 Platforms System Controller bindings
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
-  - Christophe Roullier <christophe.roullier@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 9ac7da0..bcaf7be 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 Platforms Device Tree Bindings
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
 
 properties:
   $nodename:
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
index 6e80dbc..aa1df03 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -104,7 +104,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
     cgu: clock-controller@10000000 {
       compatible = "ingenic,jz4770-cgu", "simple-mfd";
       reg = <0x10000000 0x100>;
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
index e17143c..252085a 100644
--- a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
+++ b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
@@ -42,6 +42,9 @@
   "#clock-cells":
     const: 1
 
+  "#reset-cells":
+    const: 1
+
 required:
   - compatible
   - reg
@@ -57,4 +60,5 @@
       reg = <0x10000000 0x1000>;
       clocks = <&hfclk>, <&rtcclk>;
       #clock-cells = <1>;
+      #reset-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
index 8fe6f80..bfda6af 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -2,7 +2,7 @@
 
 Reference
 [1] Si5351A/B/C Data Sheet
-    https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+    https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
 
 The Si5351a/b/c are programmable i2c clock generators with up to 8 output
 clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
index c3930ed..9a0cc73 100644
--- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -23,6 +23,7 @@
           - socionext,uniphier-ld11-clock
           - socionext,uniphier-ld20-clock
           - socionext,uniphier-pxs3-clock
+          - socionext,uniphier-nx1-clock
       - description: Media I/O (MIO) clock, SD clock
         enum:
           - socionext,uniphier-ld4-mio-clock
@@ -33,6 +34,7 @@
           - socionext,uniphier-ld11-mio-clock
           - socionext,uniphier-ld20-sd-clock
           - socionext,uniphier-pxs3-sd-clock
+          - socionext,uniphier-nx1-sd-clock
       - description: Peripheral clock
         enum:
           - socionext,uniphier-ld4-peri-clock
@@ -43,6 +45,10 @@
           - socionext,uniphier-ld11-peri-clock
           - socionext,uniphier-ld20-peri-clock
           - socionext,uniphier-pxs3-peri-clock
+          - socionext,uniphier-nx1-peri-clock
+      - description: SoC-glue clock
+        enum:
+          - socionext,uniphier-pro4-sg-clock
 
   "#clock-cells":
     const: 1
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
index 8b1ecb2..a0ae486 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -7,7 +7,7 @@
 title: Reset Clock Controller Binding
 
 maintainers:
-  - Gabriel Fernandez <gabriel.fernandez@st.com>
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
 
 description: |
   The RCC IP is both a reset and a clock controller.
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
index cee624c..b72e485 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 CRC bindings
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
index a4574552..ed23bf9 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 CRYP bindings
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index 6dd658f..10ba947 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 HASH bindings
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
index 3c3e51a..11fd68a 100644
--- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -7,7 +7,7 @@
 title: Synopsys DesignWare MIPI DSI host controller
 
 maintainers:
-  - Philippe CORNU <philippe.cornu@st.com>
+  - Philippe CORNU <philippe.cornu@foss.st.com>
 
 description: |
   This document defines device tree properties for the Synopsys DesignWare MIPI
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
deleted file mode 100644
index 583c5e9..0000000
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Toshiba TC358767 eDP bridge bindings
-
-Required properties:
- - compatible: "toshiba,tc358767"
- - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
- - clock-names: should be "ref"
- - clocks: OF device-tree clock specification for refclk input. The reference
-   clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
-
-Optional properties:
- - shutdown-gpios: OF device-tree gpio specification for SD pin
-                   (active high shutdown input)
- - reset-gpios: OF device-tree gpio specification for RSTX pin
-                (active low system reset)
- - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
- - ports: the ports node can contain video interface port nodes to connect
-   to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
-    - port@0: DSI input port
-    - port@1: DPI input port
-    - port@2: eDP/DP output port
-
-[1]: Documentation/devicetree/bindings/graph.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	edp-bridge@68 {
-		compatible = "toshiba,tc358767";
-		reg = <0x68>;
-		shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		clock-names = "ref";
-		clocks = <&edp_refclk>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				bridge_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
new file mode 100644
index 0000000..f1541cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358767 eDP bridge bindings
+
+maintainers:
+  - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+
+description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP
+
+properties:
+  compatible:
+    const: toshiba,tc358767
+
+  reg:
+    enum:
+      - 0x68
+      - 0x0f
+    description: |
+        i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
+
+  clock-names:
+    const: "ref"
+
+  clocks:
+    maxItems: 1
+    description: |
+        OF device-tree clock specification for refclk input. The reference.
+        clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for SD pin(active high shutdown input)
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for RSTX pin(active low system reset)
+
+  toshiba,hpd-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+    description: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            DSI input port. The remote endpoint phandle should be a
+            reference to a valid DSI output endpoint node
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            DPI input port. The remote endpoint phandle should be a
+            reference to a valid DPI output endpoint node
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            eDP/DP output port. The remote endpoint phandle should be a
+            reference to a valid eDP panel input endpoint node. This port is
+            optional, treated as DP panel if not defined
+
+    oneOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* DPI input and eDP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_0: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    bridge_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    /* DPI input and DP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_1: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
index e679f48..3f93def 100644
--- a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
@@ -45,7 +45,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
     ipu@13080000 {
       compatible = "ingenic,jz4770-ipu", "ingenic,jz4760-ipu";
       reg = <0x13080000 0x800>;
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
index 50d2b0a..0049010 100644
--- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
@@ -88,7 +88,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
     lcd-controller@13050000 {
       compatible = "ingenic,jz4740-lcd";
       reg = <0x13050000 0x1000>;
@@ -107,7 +107,7 @@
     };
 
   - |
-    #include <dt-bindings/clock/jz4725b-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4725b-cgu.h>
     lcd-controller@13050000 {
       compatible = "ingenic,jz4725b-lcd";
       reg = <0x13050000 0x1000>;
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
index 4b6dda6..17cbd0a 100644
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
@@ -7,7 +7,7 @@
 title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
 
 maintainers:
-  - Philippe CORNU <philippe.cornu@st.com>
+  - Philippe CORNU <philippe.cornu@foss.st.com>
 
 description: |
              The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
index 3947779..e8ce231 100644
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
@@ -7,7 +7,7 @@
 title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
 
 maintainers:
-  - Philippe CORNU <philippe.cornu@st.com>
+  - Philippe CORNU <philippe.cornu@foss.st.com>
 
 description: |
   The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index ed310bb..ce1ef93 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -7,8 +7,8 @@
 title: STMicroelectronics STM32 DSI host controller
 
 maintainers:
-  - Philippe Cornu <philippe.cornu@st.com>
-  - Yannick Fertre <yannick.fertre@st.com>
+  - Philippe Cornu <philippe.cornu@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
 
 description:
   The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller.
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index 4ae3d75..01e2da2 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -7,8 +7,8 @@
 title: STMicroelectronics STM32 lcd-tft display controller
 
 maintainers:
-  - Philippe Cornu <philippe.cornu@st.com>
-  - Yannick Fertre <yannick.fertre@st.com>
+  - Philippe Cornu <philippe.cornu@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
index ac4d594..dc059d6 100644
--- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -68,7 +68,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     dma: dma-controller@13420000 {
       compatible = "ingenic,jz4780-dma";
       reg = <0x13420000 0x400>, <0x13421000 0x40>;
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
index 4bf676fd..55faab6 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -50,7 +50,7 @@
 
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
   - $ref: "dma-controller.yaml#"
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index c8d2b51..f751796 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 DMA MUX (DMA request router) bindings
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
   - $ref: "dma-router.yaml#"
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
index c30be84..87b4afd 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
@@ -50,7 +50,7 @@
        if no HW ack signal is used by the MDMA client
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
   - $ref: "dma-controller.yaml#"
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
deleted file mode 100644
index 47fc649..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Netlogic XLP Family GPIO
-========================
-
-This GPIO driver is used for following Netlogic XLP SoCs:
-	XLP832, XLP316, XLP208, XLP980, XLP532
-This GPIO driver is also compatible with GPIO controller found on
-Broadcom Vulcan ARM64.
-
-Required properties:
--------------------
-
-- compatible: Should be one of the following:
-  - "netlogic,xlp832-gpio": For Netlogic XLP832
-  - "netlogic,xlp316-gpio": For Netlogic XLP316
-  - "netlogic,xlp208-gpio": For Netlogic XLP208
-  - "netlogic,xlp980-gpio": For Netlogic XLP980
-  - "netlogic,xlp532-gpio": For Netlogic XLP532
-  - "brcm,vulcan-gpio": For Broadcom Vulcan ARM64
-- reg: Physical base address and length of the controller's registers.
-- #gpio-cells: Should be two. The first cell is the pin number and the second
-  cell is used to specify optional parameters (currently unused).
-- gpio-controller: Marks the device node as a GPIO controller.
-- nr-gpios: Number of GPIO pins supported by the controller.
-- interrupt-cells: Should be two. The first cell is the GPIO Number. The
-  second cell is used to specify flags. The following subset of flags is
-  supported:
-  - trigger type:
-	1 = low to high edge triggered.
-	2 = high to low edge triggered.
-	4 = active high level-sensitive.
-	8 = active low level-sensitive.
-- interrupts: Interrupt number for this device.
-- interrupt-controller: Identifies the node as an interrupt controller.
-
-Example:
-
-	gpio: xlp_gpio@34000 {
-		compatible = "netlogic,xlp316-gpio";
-		reg = <0 0x34100 0x1000
-		       0 0x35100 0x1000>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		nr-gpios = <57>;
-
-		#interrupt-cells = <2>;
-		interrupt-parent = <&pic>;
-		interrupts = <39>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
index 47cf9c8..b18c616 100644
--- a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
@@ -7,8 +7,7 @@
 title: STMicroelectronics STM32 Hardware Spinlock bindings
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
-  - Fabien Dessenne <fabien.dessenne@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
 
 properties:
   "#hwlock-cells":
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
index 3592d49..c167958 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -57,7 +57,9 @@
     const: ipg
 
   clock-frequency:
-    enum: [ 100000, 400000 ]
+    minimum: 1
+    default: 100000
+    maximum: 400000
 
   dmas:
     items:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
deleted file mode 100644
index f818ef5..0000000
--- a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Device tree configuration for the I2C controller on the XLP9xx/5xx SoC
-
-Required properties:
-- compatible      : should be "netlogic,xlp980-i2c"
-- reg             : bus address start and address range size of device
-- interrupts      : interrupt number
-
-Optional properties:
-- clock-frequency : frequency of bus clock in Hz
-                    Defaults to 100 KHz when the property is not specified
-
-Example:
-
-i2c0: i2c@113100 {
-	compatible = "netlogic,xlp980-i2c";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0 0x113100 0x100>;
-	clock-frequency = <400000>;
-	interrupts = <30>;
-	interrupt-parent = <&pic>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
index e1e65eb..febde6cc 100644
--- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -60,7 +60,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     #include <dt-bindings/dma/jz4780-dma.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c@10054000 {
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index d747f49..c07289a 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -7,7 +7,7 @@
 title: I2C controller embedded in STMicroelectronics STM32 I2C platform
 
 maintainers:
-  - Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
+  - Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
index 3eb7aa8..698beb8 100644
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -74,7 +74,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
     #include <dt-bindings/iio/adc/ingenic,adc.h>
 
     adc@10070000 {
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
index a390343d..2287697 100644
--- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
@@ -7,7 +7,7 @@
 title: Device-Tree bindings for sigma delta modulator
 
 maintainers:
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index ec0450d..4d60745 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -19,7 +19,7 @@
   Each STM32 ADC block can have up to 3 ADC instances.
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 733351d..7c260f2 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -7,8 +7,8 @@
 title: STMicroelectronics STM32 DFSDM ADC device driver
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
-  - Olivier Moysan <olivier.moysan@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+  - Olivier Moysan <olivier.moysan@foss.st.com>
 
 description: |
   STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
index 393f700..6adeda4 100644
--- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@@ -15,7 +15,7 @@
   current.
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
index 6d3e68e..d19c881 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
@@ -7,8 +7,8 @@
 title: STM32 External Interrupt Controller Device Tree Bindings
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
-  - Ludovic Barre <ludovic.barre@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Ludovic Barre <ludovic.barre@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
index b15da9b..8eb4bf5 100644
--- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
@@ -13,8 +13,8 @@
   channels (N) can be read from a dedicated register.
 
 maintainers:
-  - Fabien Dessenne <fabien.dessenne@st.com>
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
index fa54c56..e287468 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
@@ -30,7 +30,6 @@
 
   power-domain-names:
     minItems: 2
-    maxItems: 3
     items:
       - const: venus
       - const: vcodec0
diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
index d75019c..77144cc 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
@@ -7,8 +7,7 @@
 title: STMicroelectronics STM32 CEC bindings
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
-  - Yannick Fertre <yannick.fertre@st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index 41e1d0c..9c1262a 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) binding
 
 maintainers:
-  - Hugues Fruchet <hugues.fruchet@st.com>
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
index fe0ce19..24f9e19 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -84,7 +84,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     #include <dt-bindings/gpio/gpio.h>
     nemc: memory-controller@13410000 {
       compatible = "ingenic,jz4780-nemc";
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index cba7420..6b516d3 100644
--- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -19,7 +19,7 @@
   Select. The FMC2 performs only one access at a time to an external device.
 
 maintainers:
-  - Christophe Kerello <christophe.kerello@st.com>
+  - Christophe Kerello <christophe.kerello@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index 8bcea8d..ec7f019 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -17,7 +17,7 @@
      - simple counter from IN1 input signal.
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
index dace353..10b330d 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -17,8 +17,7 @@
       programmable prescaler.
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
index 19e9afb..b2a4e4a 100644
--- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
@@ -12,7 +12,7 @@
                through VDD) and resistive touchscreen controller.
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
index 305123e7..426658a 100644
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -9,7 +9,7 @@
 description: STMicroelectronics STPMIC1 Power Management IC
 
 maintainers:
-  - pascal Paillet <p.paillet@st.com>
+  - pascal Paillet <p.paillet@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
index 6df1a94..b7e7fa71 100644
--- a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
+++ b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
@@ -44,7 +44,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
 
     cpus {
         #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
index 546480f..01d5c6d 100644
--- a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
@@ -61,7 +61,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     #include <dt-bindings/dma/jz4780-dma.h>
     mmc0: mmc@13450000 {
       compatible = "ingenic,jz4780-mmc";
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
index 89aa3ce..9de8ef6 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
@@ -55,7 +55,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     memory-controller@13410000 {
       compatible = "ingenic,jz4780-nemc";
       reg = <0x13410000 0x10000>;
diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index 29c5ef2..eab8ea3 100644
--- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
 
 maintainers:
-  - Christophe Kerello <christophe.kerello@st.com>
+  - Christophe Kerello <christophe.kerello@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
index d08a881..8e52b2e 100644
--- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml
+++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
@@ -58,7 +58,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/x1000-cgu.h>
+    #include <dt-bindings/clock/ingenic,x1000-cgu.h>
 
     mac: ethernet@134b0000 {
         compatible = "ingenic,x1000-mac";
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 282d774..7ae70dc 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -7,7 +7,7 @@
 title: Synopsys DesignWare MAC Device Tree Bindings
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
   - Giuseppe Cavallaro <peppe.cavallaro@st.com>
   - Jose Abreu <joabreu@synopsys.com>
 
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index d3f05d5..577f4e2 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -8,8 +8,8 @@
 title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
-  - Christophe Roullier <christophe.roullier@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
 
 description:
   This file documents platform glue layer for stmmac.
diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
index 1485d3f..bf84768 100644
--- a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
@@ -33,7 +33,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
 
     efuse@134100d0 {
         compatible = "ingenic,jz4780-efuse";
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
index 0b80ce2..a48c8fa 100644
--- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -13,7 +13,7 @@
   internal vref (VREFIN_CAL), unique device ID...
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
   - $ref: "nvmem.yaml#"
diff --git a/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml b/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
index 0fd93d7..5cab216 100644
--- a/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
+++ b/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
@@ -46,7 +46,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
     otg_phy: usb-phy@3c {
       compatible = "ingenic,jz4770-phy";
       reg = <0x3c 0x10>;
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 2251283..267b695 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -24,7 +24,7 @@
   |_ UTMI switch_______|          OTG controller
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index dfee6d3..ac88e01 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -8,7 +8,7 @@
 title: STM32 GPIO and Pin Mux/Config controller
 
 maintainers:
-  - Alexandre TORGUE <alexandre.torgue@st.com>
+  - Alexandre TORGUE <alexandre.torgue@foss.st.com>
 
 description: |
   STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
index 9f1c703..df0191b 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 booster for ADC analog input switches bindings
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 description: |
   Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
index 3cd4a254..836d415 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -12,7 +12,7 @@
   components through the dedicated VREF+ pin.
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
   - $ref: "regulator.yaml#"
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
index e6322bc..bd07b9c 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -7,7 +7,7 @@
 title: STM32MP1 PWR voltage regulators
 
 maintainers:
-  - Pascal Paillet <p.paillet@st.com>
+  - Pascal Paillet <p.paillet@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
index d0aa91b..aaaaaba 100644
--- a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
@@ -58,7 +58,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
 
     vpu: video-decoder@132a0000 {
       compatible = "ingenic,jz4770-vpu-rproc";
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index 1e62256..b587c97 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -11,8 +11,8 @@
   boots firmwares on the ST32MP family chipset.
 
 maintainers:
-  - Fabien Dessenne <fabien.dessenne@st.com>
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/rng/ingenic,trng.yaml b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml
index 808f247..044d9a0 100644
--- a/Documentation/devicetree/bindings/rng/ingenic,trng.yaml
+++ b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml
@@ -32,7 +32,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/x1830-cgu.h>
+    #include <dt-bindings/clock/ingenic,x1830-cgu.h>
 
     dtrng: trng@10072000 {
         compatible = "ingenic,x1830-dtrng";
diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
index 82bb2e9..9a6e4ea 100644
--- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
@@ -11,7 +11,7 @@
   IP and is fully separated from other crypto functions.
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
index 60e93e8..b235b24 100644
--- a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
@@ -72,7 +72,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
     rtc_dev: rtc@10003000 {
       compatible = "ingenic,jz4740-rtc";
       reg = <0x10003000 0x40>;
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
index 5456604..2359f54 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 Real Time Clock Bindings
 
 maintainers:
-  - Gabriel Fernandez <gabriel.fernandez@st.com>
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
index b432d4d..9ca7a18 100644
--- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
@@ -71,7 +71,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     #include <dt-bindings/dma/jz4780-dma.h>
     #include <dt-bindings/gpio/gpio.h>
     serial@10032000 {
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index f50f4ca..333dc42 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -5,7 +5,7 @@
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 maintainers:
-  - Erwan Le Ray <erwan.leray@st.com>
+  - Erwan Le Ray <erwan.leray@foss.st.com>
 
 title: STMicroelectronics STM32 USART bindings
 
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
index 0d87e2c8..963a871 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
@@ -7,7 +7,7 @@
 title: CS42L51 audio codec DT bindings
 
 maintainers:
-  - Olivier Moysan <olivier.moysan@st.com>
+  - Olivier Moysan <olivier.moysan@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
index cdc0fda..d607325 100644
--- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
+++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
@@ -71,7 +71,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
     aic: audio-controller@10020000 {
       compatible = "ingenic,jz4740-i2s";
       reg = <0x10020000 0x38>;
diff --git a/Documentation/devicetree/bindings/sound/ingenic,codec.yaml b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml
index 97d5f38..48aae54 100644
--- a/Documentation/devicetree/bindings/sound/ingenic,codec.yaml
+++ b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml
@@ -48,7 +48,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
     codec: audio-codec@10020080 {
       compatible = "ingenic,jz4740-codec";
       reg = <0x10020080 0x8>;
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
index 6feb5a0..d3966ae 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 SPI/I2S Controller
 
 maintainers:
-  - Olivier Moysan <olivier.moysan@st.com>
+  - Olivier Moysan <olivier.moysan@foss.st.com>
 
 description:
   The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index f971324..1538d11 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 Serial Audio Interface (SAI)
 
 maintainers:
-  - Olivier Moysan <olivier.moysan@st.com>
+  - Olivier Moysan <olivier.moysan@foss.st.com>
 
 description:
   The SAI interface (Serial Audio Interface) offers a wide set of audio
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
index b7f7dc4..837e830 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX)
 
 maintainers:
-  - Olivier Moysan <olivier.moysan@st.com>
+  - Olivier Moysan <olivier.moysan@foss.st.com>
 
 description: |
   The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
diff --git a/Documentation/devicetree/bindings/spi/ingenic,spi.yaml b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
index cf56cc4..5b1c7a2 100644
--- a/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
+++ b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
@@ -55,7 +55,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
     spi@10043000 {
       compatible = "ingenic,jz4770-spi", "ingenic,jz4750-spi";
       reg = <0x10043000 0x1c>;
diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt
deleted file mode 100644
index f4925ec..0000000
--- a/Documentation/devicetree/bindings/spi/spi-xlp.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-SPI Master controller for Netlogic XLP MIPS64 SOCs
-==================================================
-
-Currently this SPI controller driver is supported for the following
-Netlogic XLP SoCs:
-	XLP832, XLP316, XLP208, XLP980, XLP532
-
-Required properties:
-- compatible		: Should be "netlogic,xlp832-spi".
-- #address-cells	: Number of cells required to define a chip select address
-			  on the SPI bus.
-- #size-cells		: Should be zero.
-- reg			: Should contain register location and length.
-- clocks		: Phandle of the spi clock
-- interrupts		: Interrupt number used by this controller.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
-
-Example:
-
-	spi: xlp_spi@3a100 {
-		compatible = "netlogic,xlp832-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x3a100 0x100>;
-		clocks = <&spi_clk>;
-		interrupts = <34>;
-		interrupt-parent = <&pic>;
-
-		spi_nor@1 {
-			compatible = "spansion,s25sl12801";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <1>;	/* Chip Select */
-			spi-max-frequency = <40000000>;
-		};
-};
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
index 983c4e5..6ec6f55 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -7,8 +7,8 @@
 title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI) bindings
 
 maintainers:
-  - Christophe Kerello <christophe.kerello@st.com>
-  - Patrice Chotard <patrice.chotard@st.com>
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+  - Patrice Chotard <patrice.chotard@foss.st.com>
 
 allOf:
   - $ref: "spi-controller.yaml#"
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index 2d9af4c..3d64bed 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -13,8 +13,8 @@
   from 4 to 32-bit data size.
 
 maintainers:
-  - Erwan Leray <erwan.leray@st.com>
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Erwan Leray <erwan.leray@foss.st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
   - $ref: "spi-controller.yaml#"
diff --git a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
index c0f59c5..bee41cf 100644
--- a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STM32 digital thermal sensor (DTS) binding
 
 maintainers:
-  - David Hernandez Sanchez <david.hernandezsanchez@st.com>
+  - Pascal Paillet <p.paillet@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml b/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml
index df3eb76..98648bf 100644
--- a/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml
+++ b/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml
@@ -46,7 +46,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/x1000-cgu.h>
+    #include <dt-bindings/clock/ingenic,x1000-cgu.h>
 
     ost: timer@12000000 {
         compatible = "ingenic,x1000-ost";
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
index 8165df4..7fb37ea 100644
--- a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
@@ -237,7 +237,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
     #include <dt-bindings/clock/ingenic,tcu.h>
     tcu: timer@10002000 {
       compatible = "ingenic,jz4770-tcu", "ingenic,jz4760-tcu", "simple-mfd";
diff --git a/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml b/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml
index 176aa3c..937aa8a 100644
--- a/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml
@@ -7,7 +7,8 @@
 title: STMicroelectronics STM32 general-purpose 16 and 32 bits timers bindings
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+  - Patrice Chotard <patrice.chotard@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
index f506225a4..5921235 100644
--- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
+++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
@@ -58,7 +58,7 @@
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
     usb_phy: usb-phy {
       compatible = "usb-nop-xceiv";
       #phy-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
index 9a51efa..ead1571 100644
--- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
+++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@@ -7,7 +7,7 @@
 title: STMicroelectronics STUSB160x Type-C controller bindings
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 44cad94..43afa24 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -40,14 +40,12 @@
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: High-frequency oscillator input, divided internally
       - description: Low-frequency oscillator input, only found on some variants
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: hosc
       - const: losc
diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml
index 481bf91f..3973644 100644
--- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml
+++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml
@@ -7,8 +7,8 @@
 title: STMicroelectronics STM32 Independent WatchDoG (IWDG) bindings
 
 maintainers:
-  - Yannick Fertre <yannick.fertre@st.com>
-  - Christophe Roullier <christophe.roullier@st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
 
 allOf:
   - $ref: "watchdog.yaml#"
diff --git a/Documentation/x86/xstate.rst b/Documentation/x86/xstate.rst
index 65de3f0..5cec7fb 100644
--- a/Documentation/x86/xstate.rst
+++ b/Documentation/x86/xstate.rst
@@ -63,3 +63,12 @@
 the handler allocates a larger xstate buffer for the task so the large
 state can be context switched. In the unlikely cases that the allocation
 fails, the kernel sends SIGSEGV.
+
+Dynamic features in signal frames
+---------------------------------
+
+Dynamcally enabled features are not written to the signal frame upon signal
+entry if the feature is in its initial configuration.  This differs from
+non-dynamic features which are always written regardless of their
+configuration.  Signal handlers can examine the XSAVE buffer's XSTATE_BV
+field to determine if a features was written.
diff --git a/MAINTAINERS b/MAINTAINERS
index 41ec20b..7a2345c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14412,7 +14412,9 @@
 M:	Deep Shah <sdeep@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>
 L:	virtualization@lists.linux-foundation.org
+L:	x86@kernel.org
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 F:	Documentation/virt/paravirt_ops.rst
 F:	arch/*/include/asm/paravirt*.h
 F:	arch/*/kernel/paravirt*
@@ -21078,6 +21080,18 @@
 F:	include/linux/zsmalloc.h
 F:	mm/zsmalloc.c
 
+ZSTD
+M:	Nick Terrell <terrelln@fb.com>
+S:	Maintained
+B:	https://github.com/facebook/zstd/issues
+T:	git git://github.com/terrelln/linux.git
+F:	include/linux/zstd*
+F:	lib/zstd/
+F:	lib/decompress_unzstd.c
+F:	crypto/zstd.c
+N:	zstd
+K:	zstd
+
 ZSWAP COMPRESSED SWAP CACHING
 M:	Seth Jennings <sjenning@redhat.com>
 M:	Dan Streetman <ddstreet@ieee.org>
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a522716..77172d5 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -60,15 +60,15 @@
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 -march=armv6k
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 -march=armv5te
 arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
 arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
@@ -82,7 +82,7 @@
 tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	=-mtune=arm9e
 tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
@@ -90,11 +90,11 @@
 tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE)	=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		=-mtune=arm1136j-s
 
 # Evaluate tune cc-option calls now
 tune-y := $(tune-y)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index a4e0060..274e4f7 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -390,9 +390,9 @@
 	BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) < FIXADDR_START);
 	BUG_ON(idx >= __end_of_fixed_addresses);
 
-	/* we only support device mappings until pgprot_kernel has been set */
+	/* We support only device mappings before pgprot_kernel is set. */
 	if (WARN_ON(pgprot_val(prot) != pgprot_val(FIXMAP_PAGE_IO) &&
-		    pgprot_val(pgprot_kernel) == 0))
+		    pgprot_val(prot) && pgprot_val(pgprot_kernel) == 0))
 		return;
 
 	if (pgprot_val(prot))
diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
index a1f0b71..0c6a5a4 100644
--- a/arch/mips/boot/dts/ingenic/jz4725b.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/clock/jz4725b-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4725b-cgu.h>
 #include <dt-bindings/clock/ingenic,tcu.h>
 
 / {
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index c1afdfd..772542e 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/clock/jz4740-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4740-cgu.h>
 #include <dt-bindings/clock/ingenic,tcu.h>
 
 / {
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 05c00b9..dfe7432 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4770-cgu.h>
 #include <dt-bindings/clock/ingenic,tcu.h>
 
 / {
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 28adc3d9..b0a4e2e 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/clock/jz4780-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4780-cgu.h>
 #include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/dma/jz4780-dma.h>
 
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index dec7909..8bd27ede 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/clock/ingenic,tcu.h>
-#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/clock/ingenic,x1000-cgu.h>
 #include <dt-bindings/dma/x1000-dma.h>
 
 / {
diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi
index 215257f..2595df8 100644
--- a/arch/mips/boot/dts/ingenic/x1830.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1830.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/clock/ingenic,tcu.h>
-#include <dt-bindings/clock/x1830-cgu.h>
+#include <dt-bindings/clock/ingenic,x1830-cgu.h>
 #include <dt-bindings/dma/x1830-dma.h>
 
 / {
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6904f4b..70afb30 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -56,7 +56,6 @@
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_FORCED_THREADING
-	select MAY_HAVE_SPARSE_IRQ
 	select MODULES_USE_ELF_RELA
 	select NEED_SG_DMA_LENGTH
 	select NO_DMA if !MMU && !DMA_COHERENT
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 958f790..10290e5 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -54,6 +54,7 @@
 
 config DWARF_UNWINDER
 	bool "Enable the DWARF unwinder for stacktraces"
+	depends on DEBUG_KERNEL
 	select FRAME_POINTER
 	default n
 	help
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
index 29b8b1f..0b672b8 100644
--- a/arch/sh/boards/mach-landisk/irq.c
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -26,8 +26,8 @@
 	PCI_INTD, /* PCI int D */
 	ATA,	  /* ATA */
 	FATA,	  /* CF */
-	POWER,	  /* Power swtich */
-	BUTTON,	  /* Button swtich */
+	POWER,	  /* Power switch */
+	BUTTON,	  /* Button switch */
 };
 
 /* Vectors for LANDISK */
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index c081e7e..5c123f5 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -27,8 +27,8 @@
 suffix-$(CONFIG_KERNEL_LZO)	:= lzo
 
 targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \
-	   uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin
-extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
+	   uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin \
+	   vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
 	   vmlinux.bin.xz vmlinux.bin.lzo
 subdir- := compressed romimage
 
diff --git a/arch/sh/boot/compressed/.gitignore b/arch/sh/boot/compressed/.gitignore
index 37aa530..cd16663 100644
--- a/arch/sh/boot/compressed/.gitignore
+++ b/arch/sh/boot/compressed/.gitignore
@@ -1,7 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-ashiftrt.S
-ashldi3.c
-ashlsi3.S
-ashrsi3.S
-lshrsi3.S
 vmlinux.bin.*
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 589d2d8..cf3174d 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -5,12 +5,18 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
-		   vmlinux.bin.bz2 vmlinux.bin.lzma \
-		   vmlinux.bin.xz vmlinux.bin.lzo \
-		   head_32.o misc.o piggy.o
+OBJECTS := head_32.o misc.o cache.o piggy.o \
+           ashiftrt.o ashldi3.o ashrsi3.o ashlsi3.o lshrsi3.o
 
-OBJECTS = $(obj)/head_32.o $(obj)/misc.o $(obj)/cache.o
+# These were previously generated files. When you are building the kernel
+# with O=, make sure to remove the stale files in the output tree. Otherwise,
+# the build system wrongly compiles the stale ones.
+ifdef building_out_of_srctree
+$(shell rm -f $(addprefix $(obj)/, ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S))
+endif
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
+           vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS)
 
 GCOV_PROFILE := n
 
@@ -33,21 +39,9 @@
 LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
 		   -T $(obj)/../../kernel/vmlinux.lds
 
-#
-# Pull in the necessary libgcc bits from the in-kernel implementation.
-#
-lib1funcs-y	:= ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S
-lib1funcs-obj   := \
-	$(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y))))
+KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
-lib1funcs-dir		:= $(srctree)/arch/$(SRCARCH)/lib
-
-KBUILD_CFLAGS += -I$(lib1funcs-dir) -DDISABLE_BRANCH_PROFILING
-
-$(addprefix $(obj)/,$(lib1funcs-y)): $(obj)/%: $(lib1funcs-dir)/% FORCE
-	$(call cmd,shipped)
-
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(lib1funcs-obj) FORCE
+$(obj)/vmlinux: $(addprefix $(obj)/, $(OBJECTS)) FORCE
 	$(call if_changed,ld)
 
 $(obj)/vmlinux.bin: vmlinux FORCE
diff --git a/arch/sh/boot/compressed/ashiftrt.S b/arch/sh/boot/compressed/ashiftrt.S
new file mode 100644
index 0000000..0f3b291
--- /dev/null
+++ b/arch/sh/boot/compressed/ashiftrt.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../lib/ashiftrt.S"
diff --git a/arch/sh/boot/compressed/ashldi3.c b/arch/sh/boot/compressed/ashldi3.c
new file mode 100644
index 0000000..7cebd64
--- /dev/null
+++ b/arch/sh/boot/compressed/ashldi3.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../lib/ashldi3.c"
diff --git a/arch/sh/boot/compressed/ashlsi3.S b/arch/sh/boot/compressed/ashlsi3.S
new file mode 100644
index 0000000..e354262
--- /dev/null
+++ b/arch/sh/boot/compressed/ashlsi3.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../lib/ashlsi3.S"
diff --git a/arch/sh/boot/compressed/ashrsi3.S b/arch/sh/boot/compressed/ashrsi3.S
new file mode 100644
index 0000000..e564be9
--- /dev/null
+++ b/arch/sh/boot/compressed/ashrsi3.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../lib/ashrsi3.S"
diff --git a/arch/sh/boot/compressed/lshrsi3.S b/arch/sh/boot/compressed/lshrsi3.S
new file mode 100644
index 0000000..5a8281b
--- /dev/null
+++ b/arch/sh/boot/compressed/lshrsi3.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../lib/lshrsi3.S"
diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h
index 1a391e3..a6501b8 100644
--- a/arch/sh/include/asm/checksum_32.h
+++ b/arch/sh/include/asm/checksum_32.h
@@ -84,7 +84,8 @@
  */
 static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
-	unsigned int sum, __dummy0, __dummy1;
+	__wsum sum;
+	unsigned int __dummy0, __dummy1;
 
 	__asm__ __volatile__(
 		"mov.l	@%1+, %0\n\t"
@@ -197,6 +198,6 @@
 {
 	if (!access_ok(dst, len))
 		return 0;
-	return csum_partial_copy_generic((__force const void *)src, dst, len);
+	return csum_partial_copy_generic(src, (__force void *)dst, len);
 }
 #endif /* __ASM_SH_CHECKSUM_H */
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
index 839551c..1c49235 100644
--- a/arch/sh/include/asm/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -6,17 +6,6 @@
 #include <asm/machvec.h>
 
 /*
- * Only legacy non-sparseirq platforms have to set a reasonably sane
- * value here. sparseirq platforms allocate their irq_descs on the fly,
- * so will expand automatically based on the number of registered IRQs.
- */
-#ifdef CONFIG_SPARSE_IRQ
-# define NR_IRQS		8
-#else
-# define NR_IRQS		512
-#endif
-
-/*
  * This is a special IRQ number for indicating that no IRQ has been
  * triggered and to simply ignore the IRQ dispatch. This is a special
  * case that can happen with IRQ auto-distribution when multiple CPUs
diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
index cbc7cf8c..2d24234 100644
--- a/arch/sh/include/asm/sfp-machine.h
+++ b/arch/sh/include/asm/sfp-machine.h
@@ -13,6 +13,14 @@
 #ifndef _SFP_MACHINE_H
 #define _SFP_MACHINE_H
 
+#ifdef __BIG_ENDIAN__
+#define __BYTE_ORDER __BIG_ENDIAN
+#define __LITTLE_ENDIAN 0
+#else
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#define __BIG_ENDIAN 0
+#endif
+
 #define _FP_W_TYPE_SIZE		32
 #define _FP_W_TYPE		unsigned long
 #define _FP_WS_TYPE		signed long
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
index 73f3b48..8867bb0 100644
--- a/arch/sh/include/asm/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -68,7 +68,7 @@
 ({									\
 	long __gu_err = -EFAULT;					\
 	unsigned long __gu_val = 0;					\
-	const __typeof__(*(ptr)) *__gu_addr = (ptr);			\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);			\
 	if (likely(access_ok(__gu_addr, (size))))		\
 		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
@@ -124,7 +124,7 @@
  * Clear the area and return remaining number of bytes
  * (on failure.  Usually it's 0.)
  */
-__kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+__kernel_size_t __clear_user(void __user *addr, __kernel_size_t size);
 
 #define clear_user(addr,n)						\
 ({									\
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index f8a2bec..1261dc7b 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -73,8 +73,9 @@
 	BUILD_BUG_ON(SMP_MSG_NR >= 8);
 
 	for (i = 0; i < SMP_MSG_NR; i++)
-		request_irq(104 + i, ipi_interrupt_handler,
-			    IRQF_PERCPU, "IPI", (void *)(long)i);
+		if (request_irq(104 + i, ipi_interrupt_handler,
+			    IRQF_PERCPU, "IPI", (void *)(long)i))
+			pr_err("Failed to request irq %d\n", i);
 
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c
index a908612..5b41b59 100644
--- a/arch/sh/kernel/crash_dump.c
+++ b/arch/sh/kernel/crash_dump.c
@@ -26,7 +26,7 @@
 ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
                                size_t csize, unsigned long offset, int userbuf)
 {
-	void  *vaddr;
+	void  __iomem *vaddr;
 
 	if (!csize)
 		return 0;
@@ -34,7 +34,7 @@
 	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
 
 	if (userbuf) {
-		if (copy_to_user(buf, (vaddr + offset), csize)) {
+		if (copy_to_user((void __user *)buf, (vaddr + offset), csize)) {
 			iounmap(vaddr);
 			return -EFAULT;
 		}
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index b62ad0b..b3c715b 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -490,7 +490,7 @@
 		inc_unaligned_user_access();
 
 		oldfs = force_uaccess_begin();
-		if (copy_from_user(&instruction, (insn_size_t *)(regs->pc & ~1),
+		if (copy_from_user(&instruction, (insn_size_t __user *)(regs->pc & ~1),
 				   sizeof(instruction))) {
 			force_uaccess_end(oldfs);
 			goto uspace_segv;
@@ -614,7 +614,7 @@
 	unsigned short inst = 0;
 	int err;
 
-	get_user(inst, (unsigned short*)regs->pc);
+	get_user(inst, (unsigned short __user *)regs->pc);
 
 	err = do_fpu_inst(inst, regs);
 	if (!err) {
@@ -699,9 +699,9 @@
 		return;
 
 #ifdef CONFIG_SH_FPU_EMU
-	get_user(inst, (unsigned short *)regs->pc + 1);
+	get_user(inst, (unsigned short __user *)regs->pc + 1);
 	if (!do_fpu_inst(inst, regs)) {
-		get_user(inst, (unsigned short *)regs->pc);
+		get_user(inst, (unsigned short __user *)regs->pc);
 		if (!emulate_branch(inst, regs))
 			return;
 		/* fault in branch.*/
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index e8be0ec..cdaef65 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -51,8 +51,8 @@
 #define Rn	(regs->regs[n])
 #define Rm	(regs->regs[m])
 
-#define WRITE(d,a)	({if(put_user(d, (typeof (d)*)a)) return -EFAULT;})
-#define READ(d,a)	({if(get_user(d, (typeof (d)*)a)) return -EFAULT;})
+#define MWRITE(d,a)	({if(put_user(d, (typeof (d) __user *)a)) return -EFAULT;})
+#define MREAD(d,a)	({if(get_user(d, (typeof (d) __user *)a)) return -EFAULT;})
 
 #define PACK_S(r,f)	FP_PACK_SP(&r,f)
 #define UNPACK_S(f,r)	FP_UNPACK_SP(f,&r)
@@ -157,11 +157,11 @@
 {
 	if (FPSCR_SZ) {
 		FMOV_EXT(n);
-		READ(FRn, Rm + R0 + 4);
+		MREAD(FRn, Rm + R0 + 4);
 		n++;
-		READ(FRn, Rm + R0);
+		MREAD(FRn, Rm + R0);
 	} else {
-		READ(FRn, Rm + R0);
+		MREAD(FRn, Rm + R0);
 	}
 
 	return 0;
@@ -173,11 +173,11 @@
 {
 	if (FPSCR_SZ) {
 		FMOV_EXT(n);
-		READ(FRn, Rm + 4);
+		MREAD(FRn, Rm + 4);
 		n++;
-		READ(FRn, Rm);
+		MREAD(FRn, Rm);
 	} else {
-		READ(FRn, Rm);
+		MREAD(FRn, Rm);
 	}
 
 	return 0;
@@ -189,12 +189,12 @@
 {
 	if (FPSCR_SZ) {
 		FMOV_EXT(n);
-		READ(FRn, Rm + 4);
+		MREAD(FRn, Rm + 4);
 		n++;
-		READ(FRn, Rm);
+		MREAD(FRn, Rm);
 		Rm += 8;
 	} else {
-		READ(FRn, Rm);
+		MREAD(FRn, Rm);
 		Rm += 4;
 	}
 
@@ -207,11 +207,11 @@
 {
 	if (FPSCR_SZ) {
 		FMOV_EXT(m);
-		WRITE(FRm, Rn + R0 + 4);
+		MWRITE(FRm, Rn + R0 + 4);
 		m++;
-		WRITE(FRm, Rn + R0);
+		MWRITE(FRm, Rn + R0);
 	} else {
-		WRITE(FRm, Rn + R0);
+		MWRITE(FRm, Rn + R0);
 	}
 
 	return 0;
@@ -223,11 +223,11 @@
 {
 	if (FPSCR_SZ) {
 		FMOV_EXT(m);
-		WRITE(FRm, Rn + 4);
+		MWRITE(FRm, Rn + 4);
 		m++;
-		WRITE(FRm, Rn);
+		MWRITE(FRm, Rn);
 	} else {
-		WRITE(FRm, Rn);
+		MWRITE(FRm, Rn);
 	}
 
 	return 0;
@@ -240,12 +240,12 @@
 	if (FPSCR_SZ) {
 		FMOV_EXT(m);
 		Rn -= 8;
-		WRITE(FRm, Rn + 4);
+		MWRITE(FRm, Rn + 4);
 		m++;
-		WRITE(FRm, Rn);
+		MWRITE(FRm, Rn);
 	} else {
 		Rn -= 4;
-		WRITE(FRm, Rn);
+		MWRITE(FRm, Rn);
 	}
 
 	return 0;
@@ -445,11 +445,11 @@
 	case 0x4052:
 	case 0x4062:
 		Rn -= 4;
-		WRITE(*reg, Rn);
+		MWRITE(*reg, Rn);
 		break;
 	case 0x4056:
 	case 0x4066:
-		READ(*reg, Rn);
+		MREAD(*reg, Rn);
 		Rn += 4;
 		break;
 	default:
@@ -468,109 +468,6 @@
 }
 
 /**
- *	denormal_to_double - Given denormalized float number,
- *	                     store double float
- *
- *	@fpu: Pointer to sh_fpu_soft structure
- *	@n: Index to FP register
- */
-static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)
-{
-	unsigned long du, dl;
-	unsigned long x = fpu->fpul;
-	int exp = 1023 - 126;
-
-	if (x != 0 && (x & 0x7f800000) == 0) {
-		du = (x & 0x80000000);
-		while ((x & 0x00800000) == 0) {
-			x <<= 1;
-			exp--;
-		}
-		x &= 0x007fffff;
-		du |= (exp << 20) | (x >> 3);
-		dl = x << 29;
-
-		fpu->fp_regs[n] = du;
-		fpu->fp_regs[n+1] = dl;
-	}
-}
-
-/**
- *	ieee_fpe_handler - Handle denormalized number exception
- *
- *	@regs: Pointer to register structure
- *
- *	Returns 1 when it's handled (should not cause exception).
- */
-static int ieee_fpe_handler(struct pt_regs *regs)
-{
-	unsigned short insn = *(unsigned short *)regs->pc;
-	unsigned short finsn;
-	unsigned long nextpc;
-	int nib[4] = {
-		(insn >> 12) & 0xf,
-		(insn >> 8) & 0xf,
-		(insn >> 4) & 0xf,
-		insn & 0xf};
-
-	if (nib[0] == 0xb ||
-	    (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
-		regs->pr = regs->pc + 4;
-
-	if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
-		nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
-		if (regs->sr & 1)
-			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
-		else
-			nextpc = regs->pc + 4;
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
-		if (regs->sr & 1)
-			nextpc = regs->pc + 4;
-		else
-			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (nib[0] == 0x4 && nib[3] == 0xb &&
-		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
-		nextpc = regs->regs[nib[1]];
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (nib[0] == 0x0 && nib[3] == 0x3 &&
-		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
-		nextpc = regs->pc + 4 + regs->regs[nib[1]];
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (insn == 0x000b) { /* rts */
-		nextpc = regs->pr;
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else {
-		nextpc = regs->pc + 2;
-		finsn = insn;
-	}
-
-	if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
-		struct task_struct *tsk = current;
-
-		if ((tsk->thread.xstate->softfpu.fpscr & (1 << 17))) {
-			/* FPU error */
-			denormal_to_double (&tsk->thread.xstate->softfpu,
-					    (finsn >> 8) & 0xf);
-			tsk->thread.xstate->softfpu.fpscr &=
-				~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
-			task_thread_info(tsk)->status |= TS_USEDFPU;
-		} else {
-			force_sig_fault(SIGFPE, FPE_FLTINV,
-					(void __user *)regs->pc);
-		}
-
-		regs->pc = nextpc;
-		return 1;
-	}
-
-	return 0;
-}
-
-/**
  * fpu_init - Initialize FPU registers
  * @fpu: Pointer to software emulated FPU registers.
  */
diff --git a/arch/sh/mm/nommu.c b/arch/sh/mm/nommu.c
index 8b45044..78c4b6e 100644
--- a/arch/sh/mm/nommu.c
+++ b/arch/sh/mm/nommu.c
@@ -28,9 +28,9 @@
 	return 0;
 }
 
-__kernel_size_t __clear_user(void *to, __kernel_size_t n)
+__kernel_size_t __clear_user(void __user *to, __kernel_size_t n)
 {
-	memset(to, 0, n);
+	memset((__force void *)to, 0, n);
 	return 0;
 }
 
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index 6039644..42cf01e 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3048,8 +3048,10 @@
 {
 	struct event_constraint *c = &vlbr_constraint;
 
-	if (unlikely(constraint_match(c, event->hw.config)))
+	if (unlikely(constraint_match(c, event->hw.config))) {
+		event->hw.flags |= c->flags;
 		return c;
+	}
 
 	return NULL;
 }
diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index 6b72e9b..8043213 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -265,6 +265,8 @@
 
 	cpuc->last_task_ctx = NULL;
 	cpuc->last_log_id = 0;
+	if (!static_cpu_has(X86_FEATURE_ARCH_LBR) && cpuc->lbr_select)
+		wrmsrl(MSR_LBR_SELECT, 0);
 }
 
 /*
diff --git a/arch/x86/include/asm/fpu/xcr.h b/arch/x86/include/asm/fpu/xcr.h
index 79f95d3..9656a5b 100644
--- a/arch/x86/include/asm/fpu/xcr.h
+++ b/arch/x86/include/asm/fpu/xcr.h
@@ -3,6 +3,7 @@
 #define _ASM_X86_FPU_XCR_H
 
 #define XCR_XFEATURE_ENABLED_MASK	0x00000000
+#define XCR_XFEATURE_IN_USE_MASK	0x00000001
 
 static inline u64 xgetbv(u32 index)
 {
@@ -20,4 +21,15 @@
 	asm volatile("xsetbv" :: "a" (eax), "d" (edx), "c" (index));
 }
 
+/*
+ * Return a mask of xfeatures which are currently being tracked
+ * by the processor as being in the initial configuration.
+ *
+ * Callers should check X86_FEATURE_XGETBV1.
+ */
+static inline u64 xfeatures_in_use(void)
+{
+	return xgetbv(XCR_XFEATURE_IN_USE_MASK);
+}
+
 #endif /* _ASM_X86_FPU_XCR_H */
diff --git a/arch/x86/include/asm/fpu/xstate.h b/arch/x86/include/asm/fpu/xstate.h
index 0f8b90a..cd3dd17 100644
--- a/arch/x86/include/asm/fpu/xstate.h
+++ b/arch/x86/include/asm/fpu/xstate.h
@@ -92,6 +92,13 @@
 #define XFEATURE_MASK_FPSTATE	(XFEATURE_MASK_USER_RESTORE | \
 				 XFEATURE_MASK_SUPERVISOR_SUPPORTED)
 
+/*
+ * Features in this mask have space allocated in the signal frame, but may not
+ * have that space initialized when the feature is in its init state.
+ */
+#define XFEATURE_MASK_SIGFRAME_INITOPT	(XFEATURE_MASK_XTILE | \
+					 XFEATURE_MASK_USER_DYNAMIC)
+
 extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
 
 extern void __init update_regset_xstate_info(unsigned int size,
diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index 2715843..5a0bcf8 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -108,6 +108,8 @@
 #define INTEL_FAM6_ALDERLAKE		0x97	/* Golden Cove / Gracemont */
 #define INTEL_FAM6_ALDERLAKE_L		0x9A	/* Golden Cove / Gracemont */
 
+#define INTEL_FAM6_RAPTOR_LAKE		0xB7
+
 /* "Small Core" Processors (Atom) */
 
 #define INTEL_FAM6_ATOM_BONNELL		0x1C /* Diamondville, Pineview */
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 08b0e90..81a0211 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -126,6 +126,7 @@
 
 void cpu_disable_common(void);
 void native_smp_prepare_boot_cpu(void);
+void smp_prepare_cpus_common(void);
 void native_smp_prepare_cpus(unsigned int max_cpus);
 void calculate_max_logical_packages(void);
 void native_smp_cpus_done(unsigned int max_cpus);
diff --git a/arch/x86/include/asm/static_call.h b/arch/x86/include/asm/static_call.h
index cbb67b6..39ebe05 100644
--- a/arch/x86/include/asm/static_call.h
+++ b/arch/x86/include/asm/static_call.h
@@ -27,6 +27,7 @@
 	    ".globl " STATIC_CALL_TRAMP_STR(name) "		\n"	\
 	    STATIC_CALL_TRAMP_STR(name) ":			\n"	\
 	    insns "						\n"	\
+	    ".byte 0x53, 0x43, 0x54				\n"	\
 	    ".type " STATIC_CALL_TRAMP_STR(name) ", @function	\n"	\
 	    ".size " STATIC_CALL_TRAMP_STR(name) ", . - " STATIC_CALL_TRAMP_STR(name) " \n" \
 	    ".popsection					\n")
diff --git a/arch/x86/kernel/cpu/cpuid-deps.c b/arch/x86/kernel/cpu/cpuid-deps.c
index cb2fdd13..c881bca 100644
--- a/arch/x86/kernel/cpu/cpuid-deps.c
+++ b/arch/x86/kernel/cpu/cpuid-deps.c
@@ -76,6 +76,7 @@
 	{ X86_FEATURE_SGX1,			X86_FEATURE_SGX       },
 	{ X86_FEATURE_SGX2,			X86_FEATURE_SGX1      },
 	{ X86_FEATURE_XFD,			X86_FEATURE_XSAVES    },
+	{ X86_FEATURE_XFD,			X86_FEATURE_XGETBV1   },
 	{ X86_FEATURE_AMX_TILE,			X86_FEATURE_XFD       },
 	{}
 };
diff --git a/arch/x86/kernel/cpu/mce/intel.c b/arch/x86/kernel/cpu/mce/intel.c
index acfd5d9..bb9a46a 100644
--- a/arch/x86/kernel/cpu/mce/intel.c
+++ b/arch/x86/kernel/cpu/mce/intel.c
@@ -547,12 +547,13 @@
 {
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
-	/* MCE errata HSD131, HSM142, HSW131, BDM48, and HSM142 */
+	/* MCE errata HSD131, HSM142, HSW131, BDM48, HSM142 and SKX37 */
 	if ((c->x86 == 6) &&
 	    ((c->x86_model == INTEL_FAM6_HASWELL) ||
 	     (c->x86_model == INTEL_FAM6_HASWELL_L) ||
 	     (c->x86_model == INTEL_FAM6_BROADWELL) ||
-	     (c->x86_model == INTEL_FAM6_HASWELL_G)) &&
+	     (c->x86_model == INTEL_FAM6_HASWELL_G) ||
+	     (c->x86_model == INTEL_FAM6_SKYLAKE_X)) &&
 	    (m->bank == 0) &&
 	    ((m->status & 0xa0000000ffffffff) == 0x80000000000f0005))
 		return true;
diff --git a/arch/x86/kernel/fpu/xstate.h b/arch/x86/kernel/fpu/xstate.h
index e18210d..86ea7c0 100644
--- a/arch/x86/kernel/fpu/xstate.h
+++ b/arch/x86/kernel/fpu/xstate.h
@@ -4,6 +4,7 @@
 
 #include <asm/cpufeature.h>
 #include <asm/fpu/xstate.h>
+#include <asm/fpu/xcr.h>
 
 #ifdef CONFIG_X86_64
 DECLARE_PER_CPU(u64, xfd_state);
@@ -199,6 +200,32 @@
 }
 
 /*
+ * XSAVE itself always writes all requested xfeatures.  Removing features
+ * from the request bitmap reduces the features which are written.
+ * Generate a mask of features which must be written to a sigframe.  The
+ * unset features can be optimized away and not written.
+ *
+ * This optimization is user-visible.  Only use for states where
+ * uninitialized sigframe contents are tolerable, like dynamic features.
+ *
+ * Users of buffers produced with this optimization must check XSTATE_BV
+ * to determine which features have been optimized out.
+ */
+static inline u64 xfeatures_need_sigframe_write(void)
+{
+	u64 xfeaures_to_write;
+
+	/* In-use features must be written: */
+	xfeaures_to_write = xfeatures_in_use();
+
+	/* Also write all non-optimizable sigframe features: */
+	xfeaures_to_write |= XFEATURE_MASK_USER_SUPPORTED &
+			     ~XFEATURE_MASK_SIGFRAME_INITOPT;
+
+	return xfeaures_to_write;
+}
+
+/*
  * Save xstate to user space xsave area.
  *
  * We don't use modified optimization because xrstor/xrstors might track
@@ -220,10 +247,16 @@
 	 */
 	struct fpstate *fpstate = current->thread.fpu.fpstate;
 	u64 mask = fpstate->user_xfeatures;
-	u32 lmask = mask;
-	u32 hmask = mask >> 32;
+	u32 lmask;
+	u32 hmask;
 	int err;
 
+	/* Optimize away writing unnecessary xfeatures: */
+	if (fpu_state_size_dynamic())
+		mask &= xfeatures_need_sigframe_write();
+
+	lmask = mask;
+	hmask = mask >> 32;
 	xfd_validate_state(fpstate, mask, false);
 
 	stac();
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 8241927..ac2909f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1350,12 +1350,7 @@
 		cpu0_logical_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
 }
 
-/*
- * Prepare for SMP bootup.
- * @max_cpus: configured maximum number of CPUs, It is a legacy parameter
- *            for common interface support.
- */
-void __init native_smp_prepare_cpus(unsigned int max_cpus)
+void __init smp_prepare_cpus_common(void)
 {
 	unsigned int i;
 
@@ -1386,6 +1381,17 @@
 	set_sched_topology(x86_topology);
 
 	set_cpu_sibling_map(0);
+}
+
+/*
+ * Prepare for SMP bootup.
+ * @max_cpus: configured maximum number of CPUs, It is a legacy parameter
+ *            for common interface support.
+ */
+void __init native_smp_prepare_cpus(unsigned int max_cpus)
+{
+	smp_prepare_cpus_common();
+
 	init_freq_invariance(false, false);
 	smp_sanity_check();
 
diff --git a/arch/x86/kernel/static_call.c b/arch/x86/kernel/static_call.c
index ea028e7..9c407a3 100644
--- a/arch/x86/kernel/static_call.c
+++ b/arch/x86/kernel/static_call.c
@@ -56,10 +56,15 @@
 	text_poke_bp(insn, code, size, emulate);
 }
 
-static void __static_call_validate(void *insn, bool tail)
+static void __static_call_validate(void *insn, bool tail, bool tramp)
 {
 	u8 opcode = *(u8 *)insn;
 
+	if (tramp && memcmp(insn+5, "SCT", 3)) {
+		pr_err("trampoline signature fail");
+		BUG();
+	}
+
 	if (tail) {
 		if (opcode == JMP32_INSN_OPCODE ||
 		    opcode == RET_INSN_OPCODE)
@@ -74,7 +79,8 @@
 	/*
 	 * If we ever trigger this, our text is corrupt, we'll probably not live long.
 	 */
-	WARN_ONCE(1, "unexpected static_call insn opcode 0x%x at %pS\n", opcode, insn);
+	pr_err("unexpected static_call insn opcode 0x%x at %pS\n", opcode, insn);
+	BUG();
 }
 
 static inline enum insn_type __sc_insn(bool null, bool tail)
@@ -97,12 +103,12 @@
 	mutex_lock(&text_mutex);
 
 	if (tramp) {
-		__static_call_validate(tramp, true);
+		__static_call_validate(tramp, true, true);
 		__static_call_transform(tramp, __sc_insn(!func, true), func);
 	}
 
 	if (IS_ENABLED(CONFIG_HAVE_STATIC_CALL_INLINE) && site) {
-		__static_call_validate(site, tail);
+		__static_call_validate(site, tail, false);
 		__static_call_transform(site, __sc_insn(!func, tail), func);
 	}
 
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 9e55bcb..6a8f3b5 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -225,7 +225,6 @@
 static void __init xen_pv_smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned cpu;
-	unsigned int i;
 
 	if (skip_ioapic_setup) {
 		char *m = (max_cpus == 0) ?
@@ -238,16 +237,9 @@
 	}
 	xen_init_lock_cpu(0);
 
-	smp_store_boot_cpu_info();
-	cpu_data(0).x86_max_cores = 1;
+	smp_prepare_cpus_common();
 
-	for_each_possible_cpu(i) {
-		zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
-		zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
-		zalloc_cpumask_var(&per_cpu(cpu_die_map, i), GFP_KERNEL);
-		zalloc_cpumask_var(&per_cpu(cpu_llc_shared_map, i), GFP_KERNEL);
-	}
-	set_cpu_sibling_map(0);
+	cpu_data(0).x86_max_cores = 1;
 
 	speculative_store_bypass_ht_init();
 
diff --git a/block/blk-core.c b/block/blk-core.c
index b043de2..9ee32f8 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -809,10 +809,8 @@
 	if (unlikely(!current->io_context))
 		create_task_io_context(current, GFP_ATOMIC, q->node);
 
-	if (blk_throtl_bio(bio)) {
-		blkcg_bio_issue_init(bio);
+	if (blk_throtl_bio(bio))
 		return false;
-	}
 
 	blk_cgroup_bio_start(bio);
 	blkcg_bio_issue_init(bio);
diff --git a/block/blk-ia-ranges.c b/block/blk-ia-ranges.c
index c246c42..b925f3d 100644
--- a/block/blk-ia-ranges.c
+++ b/block/blk-ia-ranges.c
@@ -104,8 +104,8 @@
 };
 
 /**
- * disk_register_ia_ranges - register with sysfs a set of independent
- *			    access ranges
+ * disk_register_independent_access_ranges - register with sysfs a set of
+ *		independent access ranges
  * @disk:	Target disk
  * @new_iars:	New set of independent access ranges
  *
diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
index 4be652f..ba21449 100644
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -370,9 +370,6 @@
 	bool ret = false;
 	enum hctx_type type;
 
-	if (bio_queue_enter(bio))
-		return false;
-
 	if (e && e->type->ops.bio_merge) {
 		ret = e->type->ops.bio_merge(q, bio, nr_segs);
 		goto out_put;
@@ -397,7 +394,6 @@
 
 	spin_unlock(&ctx->lock);
 out_put:
-	blk_queue_exit(q);
 	return ret;
 }
 
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 629cf42..3ab34c4 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2495,8 +2495,9 @@
 	return BLK_MAX_REQUEST_COUNT;
 }
 
-static bool blk_attempt_bio_merge(struct request_queue *q, struct bio *bio,
-				  unsigned int nr_segs, bool *same_queue_rq)
+static bool blk_mq_attempt_bio_merge(struct request_queue *q,
+				     struct bio *bio, unsigned int nr_segs,
+				     bool *same_queue_rq)
 {
 	if (!blk_queue_nomerges(q) && bio_mergeable(bio)) {
 		if (blk_attempt_plug_merge(q, bio, nr_segs, same_queue_rq))
@@ -2520,12 +2521,8 @@
 	};
 	struct request *rq;
 
-	if (unlikely(bio_queue_enter(bio)))
+	if (blk_mq_attempt_bio_merge(q, bio, nsegs, same_queue_rq))
 		return NULL;
-	if (unlikely(!submit_bio_checks(bio)))
-		goto put_exit;
-	if (blk_attempt_bio_merge(q, bio, nsegs, same_queue_rq))
-		goto put_exit;
 
 	rq_qos_throttle(q, bio);
 
@@ -2542,26 +2539,44 @@
 	rq_qos_cleanup(q, bio);
 	if (bio->bi_opf & REQ_NOWAIT)
 		bio_wouldblock_error(bio);
-put_exit:
-	blk_queue_exit(q);
+
 	return NULL;
 }
 
+static inline bool blk_mq_can_use_cached_rq(struct request *rq,
+		struct bio *bio)
+{
+	if (blk_mq_get_hctx_type(bio->bi_opf) != rq->mq_hctx->type)
+		return false;
+
+	if (op_is_flush(rq->cmd_flags) != op_is_flush(bio->bi_opf))
+		return false;
+
+	return true;
+}
+
 static inline struct request *blk_mq_get_request(struct request_queue *q,
 						 struct blk_plug *plug,
 						 struct bio *bio,
 						 unsigned int nsegs,
 						 bool *same_queue_rq)
 {
+	struct request *rq;
+	bool checked = false;
+
 	if (plug) {
-		struct request *rq;
 
 		rq = rq_list_peek(&plug->cached_rq);
 		if (rq && rq->q == q) {
 			if (unlikely(!submit_bio_checks(bio)))
 				return NULL;
-			if (blk_attempt_bio_merge(q, bio, nsegs, same_queue_rq))
+			if (blk_mq_attempt_bio_merge(q, bio, nsegs,
+						same_queue_rq))
 				return NULL;
+			checked = true;
+			if (!blk_mq_can_use_cached_rq(rq, bio))
+				goto fallback;
+			rq->cmd_flags = bio->bi_opf;
 			plug->cached_rq = rq_list_next(rq);
 			INIT_LIST_HEAD(&rq->queuelist);
 			rq_qos_throttle(q, bio);
@@ -2569,7 +2584,15 @@
 		}
 	}
 
-	return blk_mq_get_new_requests(q, plug, bio, nsegs, same_queue_rq);
+fallback:
+	if (unlikely(bio_queue_enter(bio)))
+		return NULL;
+	if (!checked && !submit_bio_checks(bio))
+		return NULL;
+	rq = blk_mq_get_new_requests(q, plug, bio, nsegs, same_queue_rq);
+	if (!rq)
+		blk_queue_exit(q);
+	return rq;
 }
 
 /**
diff --git a/block/blk-mq.h b/block/blk-mq.h
index cb0b548..8acfa65 100644
--- a/block/blk-mq.h
+++ b/block/blk-mq.h
@@ -89,15 +89,7 @@
 	return q->queue_hw_ctx[q->tag_set->map[type].mq_map[cpu]];
 }
 
-/*
- * blk_mq_map_queue() - map (cmd_flags,type) to hardware queue
- * @q: request queue
- * @flags: request command flags
- * @ctx: software queue cpu ctx
- */
-static inline struct blk_mq_hw_ctx *blk_mq_map_queue(struct request_queue *q,
-						     unsigned int flags,
-						     struct blk_mq_ctx *ctx)
+static inline enum hctx_type blk_mq_get_hctx_type(unsigned int flags)
 {
 	enum hctx_type type = HCTX_TYPE_DEFAULT;
 
@@ -108,8 +100,20 @@
 		type = HCTX_TYPE_POLL;
 	else if ((flags & REQ_OP_MASK) == REQ_OP_READ)
 		type = HCTX_TYPE_READ;
-	
-	return ctx->hctxs[type];
+	return type;
+}
+
+/*
+ * blk_mq_map_queue() - map (cmd_flags,type) to hardware queue
+ * @q: request queue
+ * @flags: request command flags
+ * @ctx: software queue cpu ctx
+ */
+static inline struct blk_mq_hw_ctx *blk_mq_map_queue(struct request_queue *q,
+						     unsigned int flags,
+						     struct blk_mq_ctx *ctx)
+{
+	return ctx->hctxs[blk_mq_get_hctx_type(flags)];
 }
 
 /*
@@ -149,7 +153,7 @@
 	blk_mq_req_flags_t flags;
 	unsigned int shallow_depth;
 	unsigned int cmd_flags;
-	unsigned int rq_flags;
+	req_flags_t rq_flags;
 
 	/* allocate multiple requests/tags in one go */
 	unsigned int nr_tags;
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 1d0c76c..774ecc5 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -429,9 +429,10 @@
 		op = REQ_OP_ZONE_RESET;
 
 		/* Invalidate the page cache, including dirty pages. */
+		filemap_invalidate_lock(bdev->bd_inode->i_mapping);
 		ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
 		if (ret)
-			return ret;
+			goto fail;
 		break;
 	case BLKOPENZONE:
 		op = REQ_OP_ZONE_OPEN;
@@ -449,15 +450,9 @@
 	ret = blkdev_zone_mgmt(bdev, op, zrange.sector, zrange.nr_sectors,
 			       GFP_KERNEL);
 
-	/*
-	 * Invalidate the page cache again for zone reset: writes can only be
-	 * direct for zoned devices so concurrent writes would not add any page
-	 * to the page cache after/during reset. The page cache may be filled
-	 * again due to concurrent reads though and dropping the pages for
-	 * these is fine.
-	 */
-	if (!ret && cmd == BLKRESETZONE)
-		ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
+fail:
+	if (cmd == BLKRESETZONE)
+		filemap_invalidate_unlock(bdev->bd_inode->i_mapping);
 
 	return ret;
 }
diff --git a/block/genhd.c b/block/genhd.c
index ca2fbab..c5392cc 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -394,8 +394,8 @@
  * This function registers the partitioning information in @disk
  * with the kernel.
  */
-int device_add_disk(struct device *parent, struct gendisk *disk,
-		     const struct attribute_group **groups)
+int __must_check device_add_disk(struct device *parent, struct gendisk *disk,
+				 const struct attribute_group **groups)
 
 {
 	struct device *ddev = disk_to_dev(disk);
@@ -544,7 +544,7 @@
 out_free_ext_minor:
 	if (disk->major == BLOCK_EXT_MAJOR)
 		blk_free_ext_minor(disk->first_minor);
-	return WARN_ON_ONCE(ret); /* keep until all callers handle errors */
+	return ret;
 }
 EXPORT_SYMBOL(device_add_disk);
 
diff --git a/block/ioctl.c b/block/ioctl.c
index d6af0ac..0a1d10a 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -113,6 +113,7 @@
 	uint64_t range[2];
 	uint64_t start, len;
 	struct request_queue *q = bdev_get_queue(bdev);
+	struct inode *inode = bdev->bd_inode;
 	int err;
 
 	if (!(mode & FMODE_WRITE))
@@ -135,12 +136,17 @@
 	if (start + len > bdev_nr_bytes(bdev))
 		return -EINVAL;
 
+	filemap_invalidate_lock(inode->i_mapping);
 	err = truncate_bdev_range(bdev, mode, start, start + len - 1);
 	if (err)
-		return err;
+		goto fail;
 
-	return blkdev_issue_discard(bdev, start >> 9, len >> 9,
-				    GFP_KERNEL, flags);
+	err = blkdev_issue_discard(bdev, start >> 9, len >> 9,
+				   GFP_KERNEL, flags);
+
+fail:
+	filemap_invalidate_unlock(inode->i_mapping);
+	return err;
 }
 
 static int blk_ioctl_zeroout(struct block_device *bdev, fmode_t mode,
@@ -148,6 +154,7 @@
 {
 	uint64_t range[2];
 	uint64_t start, end, len;
+	struct inode *inode = bdev->bd_inode;
 	int err;
 
 	if (!(mode & FMODE_WRITE))
@@ -170,12 +177,17 @@
 		return -EINVAL;
 
 	/* Invalidate the page cache, including dirty pages */
+	filemap_invalidate_lock(inode->i_mapping);
 	err = truncate_bdev_range(bdev, mode, start, end);
 	if (err)
-		return err;
+		goto fail;
 
-	return blkdev_issue_zeroout(bdev, start >> 9, len >> 9, GFP_KERNEL,
-			BLKDEV_ZERO_NOUNMAP);
+	err = blkdev_issue_zeroout(bdev, start >> 9, len >> 9, GFP_KERNEL,
+				   BLKDEV_ZERO_NOUNMAP);
+
+fail:
+	filemap_invalidate_unlock(inode->i_mapping);
+	return err;
 }
 
 static int put_ushort(unsigned short __user *argp, unsigned short val)
diff --git a/crypto/zstd.c b/crypto/zstd.c
index 1a3309f..154a969 100644
--- a/crypto/zstd.c
+++ b/crypto/zstd.c
@@ -18,22 +18,22 @@
 #define ZSTD_DEF_LEVEL	3
 
 struct zstd_ctx {
-	ZSTD_CCtx *cctx;
-	ZSTD_DCtx *dctx;
+	zstd_cctx *cctx;
+	zstd_dctx *dctx;
 	void *cwksp;
 	void *dwksp;
 };
 
-static ZSTD_parameters zstd_params(void)
+static zstd_parameters zstd_params(void)
 {
-	return ZSTD_getParams(ZSTD_DEF_LEVEL, 0, 0);
+	return zstd_get_params(ZSTD_DEF_LEVEL, 0);
 }
 
 static int zstd_comp_init(struct zstd_ctx *ctx)
 {
 	int ret = 0;
-	const ZSTD_parameters params = zstd_params();
-	const size_t wksp_size = ZSTD_CCtxWorkspaceBound(params.cParams);
+	const zstd_parameters params = zstd_params();
+	const size_t wksp_size = zstd_cctx_workspace_bound(&params.cParams);
 
 	ctx->cwksp = vzalloc(wksp_size);
 	if (!ctx->cwksp) {
@@ -41,7 +41,7 @@
 		goto out;
 	}
 
-	ctx->cctx = ZSTD_initCCtx(ctx->cwksp, wksp_size);
+	ctx->cctx = zstd_init_cctx(ctx->cwksp, wksp_size);
 	if (!ctx->cctx) {
 		ret = -EINVAL;
 		goto out_free;
@@ -56,7 +56,7 @@
 static int zstd_decomp_init(struct zstd_ctx *ctx)
 {
 	int ret = 0;
-	const size_t wksp_size = ZSTD_DCtxWorkspaceBound();
+	const size_t wksp_size = zstd_dctx_workspace_bound();
 
 	ctx->dwksp = vzalloc(wksp_size);
 	if (!ctx->dwksp) {
@@ -64,7 +64,7 @@
 		goto out;
 	}
 
-	ctx->dctx = ZSTD_initDCtx(ctx->dwksp, wksp_size);
+	ctx->dctx = zstd_init_dctx(ctx->dwksp, wksp_size);
 	if (!ctx->dctx) {
 		ret = -EINVAL;
 		goto out_free;
@@ -152,10 +152,10 @@
 {
 	size_t out_len;
 	struct zstd_ctx *zctx = ctx;
-	const ZSTD_parameters params = zstd_params();
+	const zstd_parameters params = zstd_params();
 
-	out_len = ZSTD_compressCCtx(zctx->cctx, dst, *dlen, src, slen, params);
-	if (ZSTD_isError(out_len))
+	out_len = zstd_compress_cctx(zctx->cctx, dst, *dlen, src, slen, &params);
+	if (zstd_is_error(out_len))
 		return -EINVAL;
 	*dlen = out_len;
 	return 0;
@@ -182,8 +182,8 @@
 	size_t out_len;
 	struct zstd_ctx *zctx = ctx;
 
-	out_len = ZSTD_decompressDCtx(zctx->dctx, dst, *dlen, src, slen);
-	if (ZSTD_isError(out_len))
+	out_len = zstd_decompress_dctx(zctx->dctx, dst, *dlen, src, slen);
+	if (zstd_is_error(out_len))
 		return -EINVAL;
 	*dlen = out_len;
 	return 0;
diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 981e72a..ff16a36 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -677,6 +677,8 @@
 		cpumask_clear_cpu(cpu, topology_core_cpumask(sibling));
 	for_each_cpu(sibling, topology_sibling_cpumask(cpu))
 		cpumask_clear_cpu(cpu, topology_sibling_cpumask(sibling));
+	for_each_cpu(sibling, topology_cluster_cpumask(cpu))
+		cpumask_clear_cpu(cpu, topology_cluster_cpumask(sibling));
 	for_each_cpu(sibling, topology_llc_cpumask(cpu))
 		cpumask_clear_cpu(cpu, topology_llc_cpumask(sibling));
 
diff --git a/drivers/clk/actions/owl-factor.c b/drivers/clk/actions/owl-factor.c
index f15e262..64f316c 100644
--- a/drivers/clk/actions/owl-factor.c
+++ b/drivers/clk/actions/owl-factor.c
@@ -10,7 +10,6 @@
 
 #include <linux/clk-provider.h>
 #include <linux/regmap.h>
-#include <linux/slab.h>
 
 #include "owl-factor.h"
 
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index bc3be5f..24dab23 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -51,6 +51,8 @@
 static struct clk_hw_onecell_data *aspeed_g6_clk_data;
 
 static void __iomem *scu_g6_base;
+/* AST2600 revision: A0, A1, A2, etc */
+static u8 soc_rev;
 
 /*
  * Clocks marked with CLK_IS_CRITICAL:
@@ -191,9 +193,8 @@
 static struct clk_hw *ast2600_calc_apll(const char *name, u32 val)
 {
 	unsigned int mult, div;
-	u32 chip_id = readl(scu_g6_base + ASPEED_G6_SILICON_REV);
 
-	if (((chip_id & CHIP_REVISION_ID) >> 16) >= 2) {
+	if (soc_rev >= 2) {
 		if (val & BIT(24)) {
 			/* Pass through mode */
 			mult = div = 1;
@@ -707,7 +708,7 @@
 static void __init aspeed_g6_cc(struct regmap *map)
 {
 	struct clk_hw *hw;
-	u32 val, div, divbits, chip_id, axi_div, ahb_div;
+	u32 val, div, divbits, axi_div, ahb_div;
 
 	clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
 
@@ -738,8 +739,7 @@
 		axi_div = 2;
 
 	divbits = (val >> 11) & 0x3;
-	regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id);
-	if (chip_id & BIT(16)) {
+	if (soc_rev >= 1) {
 		if (!divbits) {
 			ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3];
 			if (val & BIT(16))
@@ -784,6 +784,8 @@
 	if (!scu_g6_base)
 		return;
 
+	soc_rev = (readl(scu_g6_base + ASPEED_G6_SILICON_REV) & CHIP_REVISION_ID) >> 16;
+
 	aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws,
 				      ASPEED_G6_NUM_CLKS), GFP_KERNEL);
 	if (!aspeed_g6_clk_data)
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index c04ae0e..b9c5f90 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -97,6 +97,7 @@
 				return ret;
 
 			req->rate = tmp_req.rate;
+			req->best_parent_hw = tmp_req.best_parent_hw;
 			req->best_parent_rate = tmp_req.best_parent_rate;
 
 			return 0;
diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index 57e4597..93fa8c9 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -1,15 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * clk-si5351.c: Silicon Laboratories Si5351A/B/C I2C Clock Generator
+ * clk-si5351.c: Skyworks / Silicon Labs Si5351A/B/C I2C Clock Generator
  *
  * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  * Rabeeh Khoury <rabeeh@solid-run.com>
  *
  * References:
  * [1] "Si5351A/B/C Data Sheet"
- *     https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
- * [2] "Manually Generating an Si5351 Register Map"
- *     https://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf
+ *     https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
+ * [2] "AN619: Manually Generating an Si5351 Register Map"
+ *     https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/application-notes/AN619.pdf
  */
 
 #include <linux/module.h>
diff --git a/drivers/clk/clk-si5351.h b/drivers/clk/clk-si5351.h
index 73dc8ef..e9e2bfd 100644
--- a/drivers/clk/clk-si5351.h
+++ b/drivers/clk/clk-si5351.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * clk-si5351.h: Silicon Laboratories Si5351A/B/C I2C Clock Generator
+ * clk-si5351.h: Skyworks / Silicon Labs Si5351A/B/C I2C Clock Generator
  *
  * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  * Rabeeh Khoury <rabeeh@solid-run.com>
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index c6d3b1a..e7be3e5 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -905,7 +905,7 @@
 
 static const struct of_device_id clk_vc5_of_match[];
 
-static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static int vc5_probe(struct i2c_client *client)
 {
 	unsigned int oe, sd, src_mask = 0, src_val = 0;
 	struct vc5_driver_data *vc5;
@@ -1244,7 +1244,7 @@
 		.pm	= &vc5_pm_ops,
 		.of_match_table = clk_vc5_of_match,
 	},
-	.probe		= vc5_probe,
+	.probe_new	= vc5_probe,
 	.remove		= vc5_remove,
 	.id_table	= vc5_id,
 };
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 8199499..7d220a0 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -391,11 +391,11 @@
 
 #define imx8m_clk_hw_composite(name, parent_names, reg) \
 	_imx8m_clk_hw_composite(name, parent_names, reg, \
-			IMX_COMPOSITE_CORE, IMX_COMPOSITE_CLK_FLAGS_DEFAULT)
+			0, IMX_COMPOSITE_CLK_FLAGS_DEFAULT)
 
 #define imx8m_clk_hw_composite_critical(name, parent_names, reg) \
 	_imx8m_clk_hw_composite(name, parent_names, reg, \
-			IMX_COMPOSITE_CORE, IMX_COMPOSITE_CLK_FLAGS_CRITICAL)
+			0, IMX_COMPOSITE_CLK_FLAGS_CRITICAL)
 
 #define imx8m_clk_hw_composite_bus(name, parent_names, reg)	\
 	_imx8m_clk_hw_composite(name, parent_names, reg, \
diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 266c759..af31633 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -453,15 +453,15 @@
 	}
 
 	/* Impose hardware constraints */
-	div = min_t(unsigned, div, 1 << clk_info->div.bits);
-	div = max_t(unsigned, div, 1);
+	div = clamp_t(unsigned int, div, clk_info->div.div,
+		      clk_info->div.div << clk_info->div.bits);
 
 	/*
 	 * If the divider value itself must be divided before being written to
 	 * the divider register, we must ensure we don't have any bits set that
 	 * would be lost as a result of doing so.
 	 */
-	div /= clk_info->div.div;
+	div = DIV_ROUND_UP(div, clk_info->div.div);
 	div *= clk_info->div.div;
 
 	return div;
diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c
index 5154b0c..744d136 100644
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -10,7 +10,7 @@
 #include <linux/delay.h>
 #include <linux/of.h>
 
-#include <dt-bindings/clock/jz4725b-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4725b-cgu.h>
 
 #include "cgu.h"
 #include "pm.h"
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index cd878f0..43ffb62 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -11,7 +11,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 
-#include <dt-bindings/clock/jz4740-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4740-cgu.h>
 
 #include "cgu.h"
 #include "pm.h"
diff --git a/drivers/clk/ingenic/jz4760-cgu.c b/drivers/clk/ingenic/jz4760-cgu.c
index 1448379..080d492 100644
--- a/drivers/clk/ingenic/jz4760-cgu.c
+++ b/drivers/clk/ingenic/jz4760-cgu.c
@@ -12,7 +12,7 @@
 
 #include <linux/clk.h>
 
-#include <dt-bindings/clock/jz4760-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4760-cgu.h>
 
 #include "cgu.h"
 #include "pm.h"
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index 2321742..8c6c120 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -10,7 +10,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 
-#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4770-cgu.h>
 
 #include "cgu.h"
 #include "pm.h"
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index 0268d23..e357c22 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -13,7 +13,7 @@
 #include <linux/iopoll.h>
 #include <linux/of.h>
 
-#include <dt-bindings/clock/jz4780-cgu.h>
+#include <dt-bindings/clock/ingenic,jz4780-cgu.h>
 
 #include "cgu.h"
 #include "pm.h"
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index 9aa20b5..3c4d5a7 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -9,7 +9,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 
-#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/clock/ingenic,x1000-cgu.h>
 
 #include "cgu.h"
 #include "pm.h"
diff --git a/drivers/clk/ingenic/x1830-cgu.c b/drivers/clk/ingenic/x1830-cgu.c
index 950aee2..e01ec2d 100644
--- a/drivers/clk/ingenic/x1830-cgu.c
+++ b/drivers/clk/ingenic/x1830-cgu.c
@@ -9,7 +9,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 
-#include <dt-bindings/clock/x1830-cgu.h>
+#include <dt-bindings/clock/ingenic,x1830-cgu.h>
 
 #include "cgu.h"
 #include "pm.h"
diff --git a/drivers/clk/mediatek/clk-mt8195-imp_iic_wrap.c b/drivers/clk/mediatek/clk-mt8195-imp_iic_wrap.c
index 0e2ac0a..4ab312e 100644
--- a/drivers/clk/mediatek/clk-mt8195-imp_iic_wrap.c
+++ b/drivers/clk/mediatek/clk-mt8195-imp_iic_wrap.c
@@ -10,8 +10,6 @@
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
 
-#include <dt-bindings/clock/mt8195-clk.h>
-
 static const struct mtk_gate_regs imp_iic_wrap_cg_regs = {
 	.set_ofs = 0xe08,
 	.clr_ofs = 0xe04,
diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index 3c3a7ff..9b1674b 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -2937,20 +2937,6 @@
 	},
 };
 
-static struct clk_branch gcc_aggre1_pnoc_ahb_clk = {
-	.halt_reg = 0x82014,
-	.clkr = {
-		.enable_reg = 0x82014,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "gcc_aggre1_pnoc_ahb_clk",
-			.parent_names = (const char *[]){ "periph_noc_clk_src" },
-			.num_parents = 1,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gcc_aggre2_ufs_axi_clk = {
 	.halt_reg = 0x83014,
 	.clkr = {
@@ -3474,7 +3460,6 @@
 	[GCC_AGGRE0_CNOC_AHB_CLK] = &gcc_aggre0_cnoc_ahb_clk.clkr,
 	[GCC_SMMU_AGGRE0_AXI_CLK] = &gcc_smmu_aggre0_axi_clk.clkr,
 	[GCC_SMMU_AGGRE0_AHB_CLK] = &gcc_smmu_aggre0_ahb_clk.clkr,
-	[GCC_AGGRE1_PNOC_AHB_CLK] = &gcc_aggre1_pnoc_ahb_clk.clkr,
 	[GCC_AGGRE2_UFS_AXI_CLK] = &gcc_aggre2_ufs_axi_clk.clkr,
 	[GCC_AGGRE2_USB3_AXI_CLK] = &gcc_aggre2_usb3_axi_clk.clkr,
 	[GCC_QSPI_AHB_CLK] = &gcc_qspi_ahb_clk.clkr,
diff --git a/drivers/clk/rockchip/Kconfig b/drivers/clk/rockchip/Kconfig
index 2dfd6a3..3067bdb 100644
--- a/drivers/clk/rockchip/Kconfig
+++ b/drivers/clk/rockchip/Kconfig
@@ -80,14 +80,14 @@
 	  Build the driver for RK3368 Clock Driver.
 
 config CLK_RK3399
-	tristate "Rockchip RK3399 clock controller support"
+	bool "Rockchip RK3399 clock controller support"
 	depends on ARM64 || COMPILE_TEST
 	default y
 	help
 	  Build the driver for RK3399 Clock Driver.
 
 config CLK_RK3568
-	tristate "Rockchip RK3568 clock controller support"
+	bool "Rockchip RK3568 clock controller support"
 	depends on ARM64 || COMPILE_TEST
 	default y
 	help
diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c
index 7924598..306910a 100644
--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -1630,7 +1630,6 @@
 	},
 	{ }
 };
-MODULE_DEVICE_TABLE(of, clk_rk3399_match_table);
 
 static int __init clk_rk3399_probe(struct platform_device *pdev)
 {
@@ -1656,7 +1655,4 @@
 		.suppress_bind_attrs = true,
 	},
 };
-module_platform_driver_probe(clk_rk3399_driver, clk_rk3399_probe);
-
-MODULE_DESCRIPTION("Rockchip RK3399 Clock Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver_probe(clk_rk3399_driver, clk_rk3399_probe);
diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 939e707..69a9e80 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -1693,7 +1693,6 @@
 	},
 	{ }
 };
-MODULE_DEVICE_TABLE(of, clk_rk3568_match_table);
 
 static int __init clk_rk3568_probe(struct platform_device *pdev)
 {
@@ -1719,7 +1718,4 @@
 		.suppress_bind_attrs = true,
 	},
 };
-module_platform_driver_probe(clk_rk3568_driver, clk_rk3568_probe);
-
-MODULE_DESCRIPTION("Rockchip RK3568 Clock Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver_probe(clk_rk3568_driver, clk_rk3568_probe);
diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c
index 1238023..46c66fa 100644
--- a/drivers/clk/uniphier/clk-uniphier-core.c
+++ b/drivers/clk/uniphier/clk-uniphier-core.c
@@ -132,6 +132,10 @@
 		.compatible = "socionext,uniphier-pxs3-clock",
 		.data = uniphier_pxs3_sys_clk_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-clock",
+		.data = uniphier_nx1_sys_clk_data,
+	},
 	/* Media I/O clock, SD clock */
 	{
 		.compatible = "socionext,uniphier-ld4-mio-clock",
@@ -165,6 +169,10 @@
 		.compatible = "socionext,uniphier-pxs3-sd-clock",
 		.data = uniphier_pro5_sd_clk_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
 	/* Peripheral clock */
 	{
 		.compatible = "socionext,uniphier-ld4-peri-clock",
@@ -198,6 +206,15 @@
 		.compatible = "socionext,uniphier-pxs3-peri-clock",
 		.data = uniphier_pro4_peri_clk_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	/* SoC-glue clock */
+	{
+		.compatible = "socionext,uniphier-pro4-sg-clock",
+		.data = uniphier_pro4_sg_clk_data,
+	},
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index 32b3017..0180470 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -20,6 +20,10 @@
 	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10),		\
 	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
 
+#define UNIPHIER_NX1_SYS_CLK_SD						\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 4),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 6)
+
 #define UNIPHIER_LD4_SYS_CLK_NAND(idx)					\
 	UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 32),		\
 	UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
@@ -288,6 +292,8 @@
 	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x210c, 7),
 	UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x210c, 8),
 	UNIPHIER_CLK_GATE("sata-phy", 30, NULL, 0x210c, 21),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
 	/* CPU gears */
 	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
 	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
@@ -300,3 +306,44 @@
 			     "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
 	{ /* sentinel */ }
 };
+
+const struct uniphier_clk_data uniphier_nx1_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 100, 1),		/* ARM: 2500 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 32, 1),		/* 800 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 6),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+	UNIPHIER_NX1_SYS_CLK_SD,
+	UNIPHIER_CLK_GATE("emmc", 4, NULL, 0x2108, 8),
+	UNIPHIER_CLK_GATE("ether", 6, NULL, 0x210c, 0),
+	UNIPHIER_CLK_GATE("usb30-0", 12, NULL, 0x210c, 16),	/* =GIO */
+	UNIPHIER_CLK_GATE("usb30-1", 13, NULL, 0x210c, 20),	/* =GIO1P */
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 24),
+	UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 25),
+	UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 26),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 8),
+	UNIPHIER_CLK_GATE("voc", 52, NULL, 0x2110, 0),
+	UNIPHIER_CLK_GATE("hdmitx", 58, NULL, 0x2110, 8),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV5("cpll", 2, 4, 8, 16, 32),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 5,
+			     "cpll/2", "cpll/4", "cpll/8", "cpll/16",
+			     "cpll/32"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_sg_clk_data[] = {
+	UNIPHIER_CLK_DIV("gpll", 4),
+	{
+		.name = "sata-ref",
+		.type = UNIPHIER_CLK_TYPE_MUX,
+		.idx = 0,
+		.data.mux = {
+			.parent_names = { "gpll/4", "ref", },
+			.num_parents = 2,
+			.reg = 0x1a28,
+			.masks = { 0x1, 0x1, },
+			.vals  = { 0x0, 0x1, },
+		},
+	},
+	{ /* sentinel */ }
+};
diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h
index 9e30362..dea0c78 100644
--- a/drivers/clk/uniphier/clk-uniphier.h
+++ b/drivers/clk/uniphier/clk-uniphier.h
@@ -119,6 +119,10 @@
 	UNIPHIER_CLK_DIV2(parent, div0, div1),			\
 	UNIPHIER_CLK_DIV2(parent, div2, div3)
 
+#define UNIPHIER_CLK_DIV5(parent, div0, div1, div2, div3, div4)	\
+	UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3),	\
+	UNIPHIER_CLK_DIV(parent, div4)
+
 struct clk_hw *uniphier_clk_register_cpugear(struct device *dev,
 					     struct regmap *regmap,
 					     const char *name,
@@ -146,9 +150,11 @@
 extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_nx1_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[];
 extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
 extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_sg_clk_data[];
 
 #endif /* __CLK_UNIPHIER_H__ */
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 77fd0ec..d52f976 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -484,7 +484,7 @@
 	struct device_node *parent;
 	struct regmap *map;
 	struct clk_icst_desc icst_desc;
-	const char *name = np->name;
+	const char *name;
 	const char *parent_name;
 	struct clk *regclk;
 	enum icst_control_type ctype;
@@ -533,15 +533,17 @@
 		icst_desc.params = &icst525_apcp_cm_params;
 		ctype = ICST_INTEGRATOR_CP_CM_MEM;
 	} else {
-		pr_err("unknown ICST clock %s\n", name);
+		pr_err("unknown ICST clock %pOF\n", np);
 		return;
 	}
 
 	/* Parent clock name is not the same as node parent */
 	parent_name = of_clk_get_parent_name(np, 0);
+	name = kasprintf(GFP_KERNEL, "%pOFP", np);
 
 	regclk = icst_clk_setup(NULL, &icst_desc, name, parent_name, map, ctype);
 	if (IS_ERR(regclk)) {
+		kfree(name);
 		pr_err("error setting up syscon ICST clock %s\n", name);
 		return;
 	}
diff --git a/drivers/irqchip/irq-csky-mpintc.c b/drivers/irqchip/irq-csky-mpintc.c
index cb403c9..4aebd67 100644
--- a/drivers/irqchip/irq-csky-mpintc.c
+++ b/drivers/irqchip/irq-csky-mpintc.c
@@ -78,7 +78,7 @@
 		readl_relaxed(reg_base + INTCL_RDYIR));
 }
 
-static void csky_mpintc_enable(struct irq_data *d)
+static void csky_mpintc_unmask(struct irq_data *d)
 {
 	void __iomem *reg_base = this_cpu_read(intcl_reg);
 
@@ -87,7 +87,7 @@
 	writel_relaxed(d->hwirq, reg_base + INTCL_SENR);
 }
 
-static void csky_mpintc_disable(struct irq_data *d)
+static void csky_mpintc_mask(struct irq_data *d)
 {
 	void __iomem *reg_base = this_cpu_read(intcl_reg);
 
@@ -164,8 +164,8 @@
 static struct irq_chip csky_irq_chip = {
 	.name           = "C-SKY SMP Intc",
 	.irq_eoi	= csky_mpintc_eoi,
-	.irq_enable	= csky_mpintc_enable,
-	.irq_disable	= csky_mpintc_disable,
+	.irq_unmask	= csky_mpintc_unmask,
+	.irq_mask	= csky_mpintc_mask,
 	.irq_set_type	= csky_mpintc_set_type,
 #ifdef CONFIG_SMP
 	.irq_set_affinity = csky_irq_set_affinity,
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index cf74cfa..259065d 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -163,7 +163,13 @@
 {
 	struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
 
-	writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+	if (irqd_irq_masked(d)) {
+		plic_irq_unmask(d);
+		writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+		plic_irq_mask(d);
+	} else {
+		writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+	}
 }
 
 static struct irq_chip plic_chip = {
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 32be5a0..b10f015b 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -161,9 +161,10 @@
 		 * if it is then we are done, unless there is an
 		 * interrupt-map which takes precedence.
 		 */
+		bool intc = of_property_read_bool(ipar, "interrupt-controller");
+
 		imap = of_get_property(ipar, "interrupt-map", &imaplen);
-		if (imap == NULL &&
-		    of_property_read_bool(ipar, "interrupt-controller")) {
+		if (imap == NULL && intc) {
 			pr_debug(" -> got it !\n");
 			return 0;
 		}
@@ -244,8 +245,20 @@
 
 			pr_debug(" -> imaplen=%d\n", imaplen);
 		}
-		if (!match)
+		if (!match) {
+			if (intc) {
+				/*
+				 * The PASEMI Nemo is a known offender, so
+				 * let's only warn for anyone else.
+				 */
+				WARN(!IS_ENABLED(CONFIG_PPC_PASEMI),
+				     "%pOF interrupt-map failed, using interrupt-controller\n",
+				     ipar);
+				return 0;
+			}
+
 			goto fail;
+		}
 
 		/*
 		 * Successfully parsed an interrrupt-map translation; copy new
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 07813fb..b3faf89 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -76,6 +76,7 @@
 	struct device_node *node = dev->of_node;
 	const __be32 *reg;
 	u64 addr;
+	u32 mask;
 
 	/* Construct the name, using parent nodes if necessary to ensure uniqueness */
 	while (node->parent) {
@@ -85,8 +86,13 @@
 		 */
 		reg = of_get_property(node, "reg", NULL);
 		if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) {
-			dev_set_name(dev, dev_name(dev) ? "%llx.%pOFn:%s" : "%llx.%pOFn",
-				     addr, node, dev_name(dev));
+			if (!of_property_read_u32(node, "mask", &mask))
+				dev_set_name(dev, dev_name(dev) ? "%llx.%x.%pOFn:%s" : "%llx.%x.%pOFn",
+					     addr, ffs(mask) - 1, node, dev_name(dev));
+
+			else
+				dev_set_name(dev, dev_name(dev) ? "%llx.%pOFn:%s" : "%llx.%pOFn",
+					     addr, node, dev_name(dev));
 			return;
 		}
 
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 12e296d..48e3f4e 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -148,6 +148,9 @@
 	raw_spinlock_t *lock = &desc->dev->msi_lock;
 	unsigned long flags;
 
+	if (!desc->msi_attrib.can_mask)
+		return;
+
 	raw_spin_lock_irqsave(lock, flags);
 	desc->msi_mask &= ~clear;
 	desc->msi_mask |= set;
@@ -181,7 +184,8 @@
 {
 	void __iomem *desc_addr = pci_msix_desc_addr(desc);
 
-	writel(ctrl, desc_addr + PCI_MSIX_ENTRY_VECTOR_CTRL);
+	if (desc->msi_attrib.can_mask)
+		writel(ctrl, desc_addr + PCI_MSIX_ENTRY_VECTOR_CTRL);
 }
 
 static inline void pci_msix_mask(struct msi_desc *desc)
@@ -200,23 +204,17 @@
 
 static void __pci_msi_mask_desc(struct msi_desc *desc, u32 mask)
 {
-	if (pci_msi_ignore_mask || desc->msi_attrib.is_virtual)
-		return;
-
 	if (desc->msi_attrib.is_msix)
 		pci_msix_mask(desc);
-	else if (desc->msi_attrib.maskbit)
+	else
 		pci_msi_mask(desc, mask);
 }
 
 static void __pci_msi_unmask_desc(struct msi_desc *desc, u32 mask)
 {
-	if (pci_msi_ignore_mask || desc->msi_attrib.is_virtual)
-		return;
-
 	if (desc->msi_attrib.is_msix)
 		pci_msix_unmask(desc);
-	else if (desc->msi_attrib.maskbit)
+	else
 		pci_msi_unmask(desc, mask);
 }
 
@@ -370,6 +368,11 @@
 			for (i = 0; i < entry->nvec_used; i++)
 				BUG_ON(irq_has_action(entry->irq + i));
 
+	if (dev->msi_irq_groups) {
+		msi_destroy_sysfs(&dev->dev, dev->msi_irq_groups);
+		dev->msi_irq_groups = NULL;
+	}
+
 	pci_msi_teardown_msi_irqs(dev);
 
 	list_for_each_entry_safe(entry, tmp, msi_list, list) {
@@ -381,11 +384,6 @@
 		list_del(&entry->list);
 		free_msi_entry(entry);
 	}
-
-	if (dev->msi_irq_groups) {
-		msi_destroy_sysfs(&dev->dev, dev->msi_irq_groups);
-		dev->msi_irq_groups = NULL;
-	}
 }
 
 static void pci_intx_for_msi(struct pci_dev *dev, int enable)
@@ -479,12 +477,16 @@
 		goto out;
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
+	/* Lies, damned lies, and MSIs */
+	if (dev->dev_flags & PCI_DEV_FLAGS_HAS_MSI_MASKING)
+		control |= PCI_MSI_FLAGS_MASKBIT;
 
 	entry->msi_attrib.is_msix	= 0;
 	entry->msi_attrib.is_64		= !!(control & PCI_MSI_FLAGS_64BIT);
 	entry->msi_attrib.is_virtual    = 0;
 	entry->msi_attrib.entry_nr	= 0;
-	entry->msi_attrib.maskbit	= !!(control & PCI_MSI_FLAGS_MASKBIT);
+	entry->msi_attrib.can_mask	= !pci_msi_ignore_mask &&
+					  !!(control & PCI_MSI_FLAGS_MASKBIT);
 	entry->msi_attrib.default_irq	= dev->irq;	/* Save IOAPIC IRQ */
 	entry->msi_attrib.multi_cap	= (control & PCI_MSI_FLAGS_QMASK) >> 1;
 	entry->msi_attrib.multiple	= ilog2(__roundup_pow_of_two(nvec));
@@ -495,7 +497,7 @@
 		entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
 
 	/* Save the initial mask status */
-	if (entry->msi_attrib.maskbit)
+	if (entry->msi_attrib.can_mask)
 		pci_read_config_dword(dev, entry->mask_pos, &entry->msi_mask);
 
 out:
@@ -639,10 +641,13 @@
 		entry->msi_attrib.is_virtual =
 			entry->msi_attrib.entry_nr >= vec_count;
 
+		entry->msi_attrib.can_mask	= !pci_msi_ignore_mask &&
+						  !entry->msi_attrib.is_virtual;
+
 		entry->msi_attrib.default_irq	= dev->irq;
 		entry->mask_base		= base;
 
-		if (!entry->msi_attrib.is_virtual) {
+		if (entry->msi_attrib.can_mask) {
 			addr = pci_msix_desc_addr(entry);
 			entry->msix_ctrl = readl(addr + PCI_MSIX_ENTRY_VECTOR_CTRL);
 		}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index aedb78c..003950c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5851,3 +5851,9 @@
 			 pci_fixup_pericom_acs_store_forward);
 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_PERICOM, 0x2303,
 			 pci_fixup_pericom_acs_store_forward);
+
+static void nvidia_ion_ahci_fixup(struct pci_dev *pdev)
+{
+	pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index bd0fbcd..e24e220 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -834,8 +834,10 @@
 
 	maple_queue_cache = KMEM_CACHE(maple_buffer, SLAB_HWCACHE_ALIGN);
 
-	if (!maple_queue_cache)
+	if (!maple_queue_cache) {
+		retval = -ENOMEM;
 		goto cleanup_bothirqs;
+	}
 
 	INIT_LIST_HEAD(&maple_waitq);
 	INIT_LIST_HEAD(&maple_sentq);
@@ -848,6 +850,7 @@
 		if (!mdev[i]) {
 			while (i-- > 0)
 				maple_free_dev(mdev[i]);
+			retval = -ENOMEM;
 			goto cleanup_cache;
 		}
 		baseunits[i] = mdev[i];
diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c
index 0da0af2..96e5a87 100644
--- a/drivers/virtio/virtio_mem.c
+++ b/drivers/virtio/virtio_mem.c
@@ -2889,6 +2889,7 @@
 #if defined(CONFIG_NUMA) && defined(CONFIG_ACPI_NUMA)
 	VIRTIO_MEM_F_ACPI_PXM,
 #endif
+	VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE,
 };
 
 static const struct virtio_device_id virtio_mem_id_table[] = {
diff --git a/fs/btrfs/zstd.c b/fs/btrfs/zstd.c
index f06b680..fc42dd0 100644
--- a/fs/btrfs/zstd.c
+++ b/fs/btrfs/zstd.c
@@ -28,10 +28,10 @@
 /* 307s to avoid pathologically clashing with transaction commit */
 #define ZSTD_BTRFS_RECLAIM_JIFFIES (307 * HZ)
 
-static ZSTD_parameters zstd_get_btrfs_parameters(unsigned int level,
+static zstd_parameters zstd_get_btrfs_parameters(unsigned int level,
 						 size_t src_len)
 {
-	ZSTD_parameters params = ZSTD_getParams(level, src_len, 0);
+	zstd_parameters params = zstd_get_params(level, src_len);
 
 	if (params.cParams.windowLog > ZSTD_BTRFS_MAX_WINDOWLOG)
 		params.cParams.windowLog = ZSTD_BTRFS_MAX_WINDOWLOG;
@@ -48,8 +48,8 @@
 	unsigned long last_used; /* jiffies */
 	struct list_head list;
 	struct list_head lru_list;
-	ZSTD_inBuffer in_buf;
-	ZSTD_outBuffer out_buf;
+	zstd_in_buffer in_buf;
+	zstd_out_buffer out_buf;
 };
 
 /*
@@ -155,12 +155,12 @@
 	unsigned int level;
 
 	for (level = 1; level <= ZSTD_BTRFS_MAX_LEVEL; level++) {
-		ZSTD_parameters params =
+		zstd_parameters params =
 			zstd_get_btrfs_parameters(level, ZSTD_BTRFS_MAX_INPUT);
 		size_t level_size =
 			max_t(size_t,
-			      ZSTD_CStreamWorkspaceBound(params.cParams),
-			      ZSTD_DStreamWorkspaceBound(ZSTD_BTRFS_MAX_INPUT));
+			      zstd_cstream_workspace_bound(&params.cParams),
+			      zstd_dstream_workspace_bound(ZSTD_BTRFS_MAX_INPUT));
 
 		max_size = max_t(size_t, max_size, level_size);
 		zstd_ws_mem_sizes[level - 1] = max_size;
@@ -371,7 +371,7 @@
 		unsigned long *total_in, unsigned long *total_out)
 {
 	struct workspace *workspace = list_entry(ws, struct workspace, list);
-	ZSTD_CStream *stream;
+	zstd_cstream *stream;
 	int ret = 0;
 	int nr_pages = 0;
 	struct page *in_page = NULL;  /* The current page to read */
@@ -381,7 +381,7 @@
 	unsigned long len = *total_out;
 	const unsigned long nr_dest_pages = *out_pages;
 	unsigned long max_out = nr_dest_pages * PAGE_SIZE;
-	ZSTD_parameters params = zstd_get_btrfs_parameters(workspace->req_level,
+	zstd_parameters params = zstd_get_btrfs_parameters(workspace->req_level,
 							   len);
 
 	*out_pages = 0;
@@ -389,10 +389,10 @@
 	*total_in = 0;
 
 	/* Initialize the stream */
-	stream = ZSTD_initCStream(params, len, workspace->mem,
+	stream = zstd_init_cstream(&params, len, workspace->mem,
 			workspace->size);
 	if (!stream) {
-		pr_warn("BTRFS: ZSTD_initCStream failed\n");
+		pr_warn("BTRFS: zstd_init_cstream failed\n");
 		ret = -EIO;
 		goto out;
 	}
@@ -418,11 +418,11 @@
 	while (1) {
 		size_t ret2;
 
-		ret2 = ZSTD_compressStream(stream, &workspace->out_buf,
+		ret2 = zstd_compress_stream(stream, &workspace->out_buf,
 				&workspace->in_buf);
-		if (ZSTD_isError(ret2)) {
-			pr_debug("BTRFS: ZSTD_compressStream returned %d\n",
-					ZSTD_getErrorCode(ret2));
+		if (zstd_is_error(ret2)) {
+			pr_debug("BTRFS: zstd_compress_stream returned %d\n",
+					zstd_get_error_code(ret2));
 			ret = -EIO;
 			goto out;
 		}
@@ -487,10 +487,10 @@
 	while (1) {
 		size_t ret2;
 
-		ret2 = ZSTD_endStream(stream, &workspace->out_buf);
-		if (ZSTD_isError(ret2)) {
-			pr_debug("BTRFS: ZSTD_endStream returned %d\n",
-					ZSTD_getErrorCode(ret2));
+		ret2 = zstd_end_stream(stream, &workspace->out_buf);
+		if (zstd_is_error(ret2)) {
+			pr_debug("BTRFS: zstd_end_stream returned %d\n",
+					zstd_get_error_code(ret2));
 			ret = -EIO;
 			goto out;
 		}
@@ -548,17 +548,17 @@
 	struct workspace *workspace = list_entry(ws, struct workspace, list);
 	struct page **pages_in = cb->compressed_pages;
 	size_t srclen = cb->compressed_len;
-	ZSTD_DStream *stream;
+	zstd_dstream *stream;
 	int ret = 0;
 	unsigned long page_in_index = 0;
 	unsigned long total_pages_in = DIV_ROUND_UP(srclen, PAGE_SIZE);
 	unsigned long buf_start;
 	unsigned long total_out = 0;
 
-	stream = ZSTD_initDStream(
+	stream = zstd_init_dstream(
 			ZSTD_BTRFS_MAX_INPUT, workspace->mem, workspace->size);
 	if (!stream) {
-		pr_debug("BTRFS: ZSTD_initDStream failed\n");
+		pr_debug("BTRFS: zstd_init_dstream failed\n");
 		ret = -EIO;
 		goto done;
 	}
@@ -574,11 +574,11 @@
 	while (1) {
 		size_t ret2;
 
-		ret2 = ZSTD_decompressStream(stream, &workspace->out_buf,
+		ret2 = zstd_decompress_stream(stream, &workspace->out_buf,
 				&workspace->in_buf);
-		if (ZSTD_isError(ret2)) {
-			pr_debug("BTRFS: ZSTD_decompressStream returned %d\n",
-					ZSTD_getErrorCode(ret2));
+		if (zstd_is_error(ret2)) {
+			pr_debug("BTRFS: zstd_decompress_stream returned %d\n",
+					zstd_get_error_code(ret2));
 			ret = -EIO;
 			goto done;
 		}
@@ -624,16 +624,16 @@
 		size_t destlen)
 {
 	struct workspace *workspace = list_entry(ws, struct workspace, list);
-	ZSTD_DStream *stream;
+	zstd_dstream *stream;
 	int ret = 0;
 	size_t ret2;
 	unsigned long total_out = 0;
 	unsigned long pg_offset = 0;
 
-	stream = ZSTD_initDStream(
+	stream = zstd_init_dstream(
 			ZSTD_BTRFS_MAX_INPUT, workspace->mem, workspace->size);
 	if (!stream) {
-		pr_warn("BTRFS: ZSTD_initDStream failed\n");
+		pr_warn("BTRFS: zstd_init_dstream failed\n");
 		ret = -EIO;
 		goto finish;
 	}
@@ -657,15 +657,15 @@
 
 		/* Check if the frame is over and we still need more input */
 		if (ret2 == 0) {
-			pr_debug("BTRFS: ZSTD_decompressStream ended early\n");
+			pr_debug("BTRFS: zstd_decompress_stream ended early\n");
 			ret = -EIO;
 			goto finish;
 		}
-		ret2 = ZSTD_decompressStream(stream, &workspace->out_buf,
+		ret2 = zstd_decompress_stream(stream, &workspace->out_buf,
 				&workspace->in_buf);
-		if (ZSTD_isError(ret2)) {
-			pr_debug("BTRFS: ZSTD_decompressStream returned %d\n",
-					ZSTD_getErrorCode(ret2));
+		if (zstd_is_error(ret2)) {
+			pr_debug("BTRFS: zstd_decompress_stream returned %d\n",
+					zstd_get_error_code(ret2));
 			ret = -EIO;
 			goto finish;
 		}
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index a0d5cfa..49121a2 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -336,8 +336,8 @@
 
 static int zstd_init_compress_ctx(struct compress_ctx *cc)
 {
-	ZSTD_parameters params;
-	ZSTD_CStream *stream;
+	zstd_parameters params;
+	zstd_cstream *stream;
 	void *workspace;
 	unsigned int workspace_size;
 	unsigned char level = F2FS_I(cc->inode)->i_compress_flag >>
@@ -346,17 +346,17 @@
 	if (!level)
 		level = F2FS_ZSTD_DEFAULT_CLEVEL;
 
-	params = ZSTD_getParams(level, cc->rlen, 0);
-	workspace_size = ZSTD_CStreamWorkspaceBound(params.cParams);
+	params = zstd_get_params(F2FS_ZSTD_DEFAULT_CLEVEL, cc->rlen);
+	workspace_size = zstd_cstream_workspace_bound(&params.cParams);
 
 	workspace = f2fs_kvmalloc(F2FS_I_SB(cc->inode),
 					workspace_size, GFP_NOFS);
 	if (!workspace)
 		return -ENOMEM;
 
-	stream = ZSTD_initCStream(params, 0, workspace, workspace_size);
+	stream = zstd_init_cstream(&params, 0, workspace, workspace_size);
 	if (!stream) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initCStream failed\n",
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_init_cstream failed\n",
 				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
 				__func__);
 		kvfree(workspace);
@@ -379,9 +379,9 @@
 
 static int zstd_compress_pages(struct compress_ctx *cc)
 {
-	ZSTD_CStream *stream = cc->private2;
-	ZSTD_inBuffer inbuf;
-	ZSTD_outBuffer outbuf;
+	zstd_cstream *stream = cc->private2;
+	zstd_in_buffer inbuf;
+	zstd_out_buffer outbuf;
 	int src_size = cc->rlen;
 	int dst_size = src_size - PAGE_SIZE - COMPRESS_HEADER_SIZE;
 	int ret;
@@ -394,19 +394,19 @@
 	outbuf.dst = cc->cbuf->cdata;
 	outbuf.size = dst_size;
 
-	ret = ZSTD_compressStream(stream, &outbuf, &inbuf);
-	if (ZSTD_isError(ret)) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_compressStream failed, ret: %d\n",
+	ret = zstd_compress_stream(stream, &outbuf, &inbuf);
+	if (zstd_is_error(ret)) {
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_compress_stream failed, ret: %d\n",
 				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
-				__func__, ZSTD_getErrorCode(ret));
+				__func__, zstd_get_error_code(ret));
 		return -EIO;
 	}
 
-	ret = ZSTD_endStream(stream, &outbuf);
-	if (ZSTD_isError(ret)) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_endStream returned %d\n",
+	ret = zstd_end_stream(stream, &outbuf);
+	if (zstd_is_error(ret)) {
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_end_stream returned %d\n",
 				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
-				__func__, ZSTD_getErrorCode(ret));
+				__func__, zstd_get_error_code(ret));
 		return -EIO;
 	}
 
@@ -423,22 +423,22 @@
 
 static int zstd_init_decompress_ctx(struct decompress_io_ctx *dic)
 {
-	ZSTD_DStream *stream;
+	zstd_dstream *stream;
 	void *workspace;
 	unsigned int workspace_size;
 	unsigned int max_window_size =
 			MAX_COMPRESS_WINDOW_SIZE(dic->log_cluster_size);
 
-	workspace_size = ZSTD_DStreamWorkspaceBound(max_window_size);
+	workspace_size = zstd_dstream_workspace_bound(max_window_size);
 
 	workspace = f2fs_kvmalloc(F2FS_I_SB(dic->inode),
 					workspace_size, GFP_NOFS);
 	if (!workspace)
 		return -ENOMEM;
 
-	stream = ZSTD_initDStream(max_window_size, workspace, workspace_size);
+	stream = zstd_init_dstream(max_window_size, workspace, workspace_size);
 	if (!stream) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initDStream failed\n",
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_init_dstream failed\n",
 				KERN_ERR, F2FS_I_SB(dic->inode)->sb->s_id,
 				__func__);
 		kvfree(workspace);
@@ -460,9 +460,9 @@
 
 static int zstd_decompress_pages(struct decompress_io_ctx *dic)
 {
-	ZSTD_DStream *stream = dic->private2;
-	ZSTD_inBuffer inbuf;
-	ZSTD_outBuffer outbuf;
+	zstd_dstream *stream = dic->private2;
+	zstd_in_buffer inbuf;
+	zstd_out_buffer outbuf;
 	int ret;
 
 	inbuf.pos = 0;
@@ -473,11 +473,11 @@
 	outbuf.dst = dic->rbuf;
 	outbuf.size = dic->rlen;
 
-	ret = ZSTD_decompressStream(stream, &outbuf, &inbuf);
-	if (ZSTD_isError(ret)) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_compressStream failed, ret: %d\n",
+	ret = zstd_decompress_stream(stream, &outbuf, &inbuf);
+	if (zstd_is_error(ret)) {
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_decompress_stream failed, ret: %d\n",
 				KERN_ERR, F2FS_I_SB(dic->inode)->sb->s_id,
-				__func__, ZSTD_getErrorCode(ret));
+				__func__, zstd_get_error_code(ret));
 		return -EIO;
 	}
 
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 7960ce0..040b6d0 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -593,7 +593,7 @@
 	if (kstrtouint(str + 1, 10, &level))
 		return -EINVAL;
 
-	if (!level || level > ZSTD_maxCLevel()) {
+	if (!level || level > zstd_max_clevel()) {
 		f2fs_info(sbi, "invalid zstd compress level: %d", level);
 		return -EINVAL;
 	}
diff --git a/fs/io-wq.c b/fs/io-wq.c
index afd955d..88202de 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -423,9 +423,10 @@
 	return work->flags >> IO_WQ_HASH_SHIFT;
 }
 
-static void io_wait_on_hash(struct io_wqe *wqe, unsigned int hash)
+static bool io_wait_on_hash(struct io_wqe *wqe, unsigned int hash)
 {
 	struct io_wq *wq = wqe->wq;
+	bool ret = false;
 
 	spin_lock_irq(&wq->hash->wait.lock);
 	if (list_empty(&wqe->wait.entry)) {
@@ -433,9 +434,11 @@
 		if (!test_bit(hash, &wq->hash->map)) {
 			__set_current_state(TASK_RUNNING);
 			list_del_init(&wqe->wait.entry);
+			ret = true;
 		}
 	}
 	spin_unlock_irq(&wq->hash->wait.lock);
+	return ret;
 }
 
 static struct io_wq_work *io_get_next_work(struct io_wqe_acct *acct,
@@ -475,14 +478,21 @@
 	}
 
 	if (stall_hash != -1U) {
+		bool unstalled;
+
 		/*
 		 * Set this before dropping the lock to avoid racing with new
 		 * work being added and clearing the stalled bit.
 		 */
 		set_bit(IO_ACCT_STALLED_BIT, &acct->flags);
 		raw_spin_unlock(&wqe->lock);
-		io_wait_on_hash(wqe, stall_hash);
+		unstalled = io_wait_on_hash(wqe, stall_hash);
 		raw_spin_lock(&wqe->lock);
+		if (unstalled) {
+			clear_bit(IO_ACCT_STALLED_BIT, &acct->flags);
+			if (wq_has_sleeper(&wqe->wq->hash->wait))
+				wake_up(&wqe->wq->hash->wait);
+		}
 	}
 
 	return NULL;
@@ -564,8 +574,11 @@
 				io_wqe_enqueue(wqe, linked);
 
 			if (hash != -1U && !next_hashed) {
+				/* serialize hash clear with wake_up() */
+				spin_lock_irq(&wq->hash->wait.lock);
 				clear_bit(hash, &wq->hash->map);
 				clear_bit(IO_ACCT_STALLED_BIT, &acct->flags);
+				spin_unlock_irq(&wq->hash->wait.lock);
 				if (wq_has_sleeper(&wq->hash->wait))
 					wake_up(&wq->hash->wait);
 				raw_spin_lock(&wqe->lock);
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index b9614db..f243cb5 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -218,7 +218,7 @@
 #if IS_ENABLED(CONFIG_PSTORE_ZSTD_COMPRESS)
 static int zbufsize_zstd(size_t size)
 {
-	return ZSTD_compressBound(size);
+	return zstd_compress_bound(size);
 }
 #endif
 
diff --git a/fs/squashfs/zstd_wrapper.c b/fs/squashfs/zstd_wrapper.c
index 0015cf8..c40445d 100644
--- a/fs/squashfs/zstd_wrapper.c
+++ b/fs/squashfs/zstd_wrapper.c
@@ -34,7 +34,7 @@
 		goto failed;
 	wksp->window_size = max_t(size_t,
 			msblk->block_size, SQUASHFS_METADATA_SIZE);
-	wksp->mem_size = ZSTD_DStreamWorkspaceBound(wksp->window_size);
+	wksp->mem_size = zstd_dstream_workspace_bound(wksp->window_size);
 	wksp->mem = vmalloc(wksp->mem_size);
 	if (wksp->mem == NULL)
 		goto failed;
@@ -63,15 +63,15 @@
 	struct squashfs_page_actor *output)
 {
 	struct workspace *wksp = strm;
-	ZSTD_DStream *stream;
+	zstd_dstream *stream;
 	size_t total_out = 0;
 	int error = 0;
-	ZSTD_inBuffer in_buf = { NULL, 0, 0 };
-	ZSTD_outBuffer out_buf = { NULL, 0, 0 };
+	zstd_in_buffer in_buf = { NULL, 0, 0 };
+	zstd_out_buffer out_buf = { NULL, 0, 0 };
 	struct bvec_iter_all iter_all = {};
 	struct bio_vec *bvec = bvec_init_iter_all(&iter_all);
 
-	stream = ZSTD_initDStream(wksp->window_size, wksp->mem, wksp->mem_size);
+	stream = zstd_init_dstream(wksp->window_size, wksp->mem, wksp->mem_size);
 
 	if (!stream) {
 		ERROR("Failed to initialize zstd decompressor\n");
@@ -116,14 +116,14 @@
 		}
 
 		total_out -= out_buf.pos;
-		zstd_err = ZSTD_decompressStream(stream, &out_buf, &in_buf);
+		zstd_err = zstd_decompress_stream(stream, &out_buf, &in_buf);
 		total_out += out_buf.pos; /* add the additional data produced */
 		if (zstd_err == 0)
 			break;
 
-		if (ZSTD_isError(zstd_err)) {
+		if (zstd_is_error(zstd_err)) {
 			ERROR("zstd decompression error: %d\n",
-					(int)ZSTD_getErrorCode(zstd_err));
+					(int)zstd_get_error_code(zstd_err));
 			error = -EIO;
 			break;
 		}
diff --git a/include/dt-bindings/clock/jz4725b-cgu.h b/include/dt-bindings/clock/ingenic,jz4725b-cgu.h
similarity index 100%
rename from include/dt-bindings/clock/jz4725b-cgu.h
rename to include/dt-bindings/clock/ingenic,jz4725b-cgu.h
diff --git a/include/dt-bindings/clock/jz4740-cgu.h b/include/dt-bindings/clock/ingenic,jz4740-cgu.h
similarity index 100%
rename from include/dt-bindings/clock/jz4740-cgu.h
rename to include/dt-bindings/clock/ingenic,jz4740-cgu.h
diff --git a/include/dt-bindings/clock/jz4760-cgu.h b/include/dt-bindings/clock/ingenic,jz4760-cgu.h
similarity index 100%
rename from include/dt-bindings/clock/jz4760-cgu.h
rename to include/dt-bindings/clock/ingenic,jz4760-cgu.h
diff --git a/include/dt-bindings/clock/jz4770-cgu.h b/include/dt-bindings/clock/ingenic,jz4770-cgu.h
similarity index 100%
rename from include/dt-bindings/clock/jz4770-cgu.h
rename to include/dt-bindings/clock/ingenic,jz4770-cgu.h
diff --git a/include/dt-bindings/clock/jz4780-cgu.h b/include/dt-bindings/clock/ingenic,jz4780-cgu.h
similarity index 100%
rename from include/dt-bindings/clock/jz4780-cgu.h
rename to include/dt-bindings/clock/ingenic,jz4780-cgu.h
diff --git a/include/dt-bindings/clock/x1000-cgu.h b/include/dt-bindings/clock/ingenic,x1000-cgu.h
similarity index 100%
rename from include/dt-bindings/clock/x1000-cgu.h
rename to include/dt-bindings/clock/ingenic,x1000-cgu.h
diff --git a/include/dt-bindings/clock/x1830-cgu.h b/include/dt-bindings/clock/ingenic,x1830-cgu.h
similarity index 100%
rename from include/dt-bindings/clock/x1830-cgu.h
rename to include/dt-bindings/clock/ingenic,x1830-cgu.h
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 462634b..74c4102 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -205,9 +205,9 @@
 void disk_uevent(struct gendisk *disk, enum kobject_action action);
 
 /* block/genhd.c */
-int device_add_disk(struct device *parent, struct gendisk *disk,
-		const struct attribute_group **groups);
-static inline int add_disk(struct gendisk *disk)
+int __must_check device_add_disk(struct device *parent, struct gendisk *disk,
+				 const struct attribute_group **groups);
+static inline int __must_check add_disk(struct gendisk *disk)
 {
 	return device_add_disk(NULL, disk, NULL);
 }
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 968b4c4..77755ac 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -85,7 +85,7 @@
 struct completion;
 struct user;
 
-#ifdef CONFIG_PREEMPT_VOLUNTARY
+#ifdef CONFIG_PREEMPT_VOLUNTARY_BUILD
 
 extern int __cond_resched(void);
 # define might_resched() __cond_resched()
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 49cf6eb..e616f94 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -148,7 +148,7 @@
 				u8	is_msix		: 1;
 				u8	multiple	: 3;
 				u8	multi_cap	: 3;
-				u8	maskbit		: 1;
+				u8	can_mask	: 1;
 				u8	is_64		: 1;
 				u8	is_virtual	: 1;
 				u16	entry_nr;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 0b9d580..18a75c8e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -233,6 +233,8 @@
 	PCI_DEV_FLAGS_NO_FLR_RESET = (__force pci_dev_flags_t) (1 << 10),
 	/* Don't use Relaxed Ordering for TLPs directed at this device */
 	PCI_DEV_FLAGS_NO_RELAXED_ORDERING = (__force pci_dev_flags_t) (1 << 11),
+	/* Device does honor MSI masking despite saying otherwise */
+	PCI_DEV_FLAGS_HAS_MSI_MASKING = (__force pci_dev_flags_t) (1 << 12),
 };
 
 enum pci_irq_reroute_variant {
diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
index 00fef00..5bbcd28 100644
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -184,8 +184,10 @@
 #endif
 
 #ifdef CONFIG_POSIX_CPU_TIMERS_TASK_WORK
+void clear_posix_cputimers_work(struct task_struct *p);
 void posix_cputimers_init_work(void);
 #else
+static inline void clear_posix_cputimers_work(struct task_struct *p) { }
 static inline void posix_cputimers_init_work(void) { }
 #endif
 
diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h
index 1eaaa93..329d63b 100644
--- a/include/linux/vermagic.h
+++ b/include/linux/vermagic.h
@@ -15,7 +15,7 @@
 #else
 #define MODULE_VERMAGIC_SMP ""
 #endif
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_BUILD
 #define MODULE_VERMAGIC_PREEMPT "preempt "
 #elif defined(CONFIG_PREEMPT_RT)
 #define MODULE_VERMAGIC_PREEMPT "preempt_rt "
diff --git a/include/linux/zstd.h b/include/linux/zstd.h
index e87f78c..113408e 100644
--- a/include/linux/zstd.h
+++ b/include/linux/zstd.h
@@ -1,138 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
 /*
- * Copyright (c) 2016-present, Yann Collet, Facebook, Inc.
+ * Copyright (c) Yann Collet, Facebook, Inc.
  * All rights reserved.
  *
- * This source code is licensed under the BSD-style license found in the
- * LICENSE file in the root directory of https://github.com/facebook/zstd.
- * An additional grant of patent rights can be found in the PATENTS file in the
- * same directory.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation. This program is dual-licensed; you may select
- * either version 2 of the GNU General Public License ("GPL") or BSD license
- * ("BSD").
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of https://github.com/facebook/zstd) and
+ * the GPLv2 (found in the COPYING file in the root directory of
+ * https://github.com/facebook/zstd). You may select, at your option, one of the
+ * above-listed licenses.
  */
 
-#ifndef ZSTD_H
-#define ZSTD_H
-
-/* ======   Dependency   ======*/
-#include <linux/types.h>   /* size_t */
-
-
-/*-*****************************************************************************
- * Introduction
- *
- * zstd, short for Zstandard, is a fast lossless compression algorithm,
- * targeting real-time compression scenarios at zlib-level and better
- * compression ratios. The zstd compression library provides in-memory
- * compression and decompression functions. The library supports compression
- * levels from 1 up to ZSTD_maxCLevel() which is 22. Levels >= 20, labeled
- * ultra, should be used with caution, as they require more memory.
- * Compression can be done in:
- *  - a single step, reusing a context (described as Explicit memory management)
- *  - unbounded multiple steps (described as Streaming compression)
- * The compression ratio achievable on small data can be highly improved using
- * compression with a dictionary in:
- *  - a single step (described as Simple dictionary API)
- *  - a single step, reusing a dictionary (described as Fast dictionary API)
- ******************************************************************************/
-
-/*======  Helper functions  ======*/
+#ifndef LINUX_ZSTD_H
+#define LINUX_ZSTD_H
 
 /**
- * enum ZSTD_ErrorCode - zstd error codes
- *
- * Functions that return size_t can be checked for errors using ZSTD_isError()
- * and the ZSTD_ErrorCode can be extracted using ZSTD_getErrorCode().
+ * This is a kernel-style API that wraps the upstream zstd API, which cannot be
+ * used directly because the symbols aren't exported. It exposes the minimal
+ * functionality which is currently required by users of zstd in the kernel.
+ * Expose extra functions from lib/zstd/zstd.h as needed.
  */
-typedef enum {
-	ZSTD_error_no_error,
-	ZSTD_error_GENERIC,
-	ZSTD_error_prefix_unknown,
-	ZSTD_error_version_unsupported,
-	ZSTD_error_parameter_unknown,
-	ZSTD_error_frameParameter_unsupported,
-	ZSTD_error_frameParameter_unsupportedBy32bits,
-	ZSTD_error_frameParameter_windowTooLarge,
-	ZSTD_error_compressionParameter_unsupported,
-	ZSTD_error_init_missing,
-	ZSTD_error_memory_allocation,
-	ZSTD_error_stage_wrong,
-	ZSTD_error_dstSize_tooSmall,
-	ZSTD_error_srcSize_wrong,
-	ZSTD_error_corruption_detected,
-	ZSTD_error_checksum_wrong,
-	ZSTD_error_tableLog_tooLarge,
-	ZSTD_error_maxSymbolValue_tooLarge,
-	ZSTD_error_maxSymbolValue_tooSmall,
-	ZSTD_error_dictionary_corrupted,
-	ZSTD_error_dictionary_wrong,
-	ZSTD_error_dictionaryCreation_failed,
-	ZSTD_error_maxCode
-} ZSTD_ErrorCode;
+
+/* ======   Dependency   ====== */
+#include <linux/types.h>
+#include <linux/zstd_errors.h>
+#include <linux/zstd_lib.h>
+
+/* ======   Helper Functions   ====== */
+/**
+ * zstd_compress_bound() - maximum compressed size in worst case scenario
+ * @src_size: The size of the data to compress.
+ *
+ * Return:    The maximum compressed size in the worst case scenario.
+ */
+size_t zstd_compress_bound(size_t src_size);
 
 /**
- * ZSTD_maxCLevel() - maximum compression level available
- *
- * Return: Maximum compression level available.
- */
-int ZSTD_maxCLevel(void);
-/**
- * ZSTD_compressBound() - maximum compressed size in worst case scenario
- * @srcSize: The size of the data to compress.
- *
- * Return:   The maximum compressed size in the worst case scenario.
- */
-size_t ZSTD_compressBound(size_t srcSize);
-/**
- * ZSTD_isError() - tells if a size_t function result is an error code
+ * zstd_is_error() - tells if a size_t function result is an error code
  * @code:  The function result to check for error.
  *
  * Return: Non-zero iff the code is an error.
  */
-static __attribute__((unused)) unsigned int ZSTD_isError(size_t code)
-{
-	return code > (size_t)-ZSTD_error_maxCode;
-}
-/**
- * ZSTD_getErrorCode() - translates an error function result to a ZSTD_ErrorCode
- * @functionResult: The result of a function for which ZSTD_isError() is true.
- *
- * Return:          The ZSTD_ErrorCode corresponding to the functionResult or 0
- *                  if the functionResult isn't an error.
- */
-static __attribute__((unused)) ZSTD_ErrorCode ZSTD_getErrorCode(
-	size_t functionResult)
-{
-	if (!ZSTD_isError(functionResult))
-		return (ZSTD_ErrorCode)0;
-	return (ZSTD_ErrorCode)(0 - functionResult);
-}
+unsigned int zstd_is_error(size_t code);
 
 /**
- * enum ZSTD_strategy - zstd compression search strategy
- *
- * From faster to stronger.
+ * enum zstd_error_code - zstd error codes
  */
-typedef enum {
-	ZSTD_fast,
-	ZSTD_dfast,
-	ZSTD_greedy,
-	ZSTD_lazy,
-	ZSTD_lazy2,
-	ZSTD_btlazy2,
-	ZSTD_btopt,
-	ZSTD_btopt2
-} ZSTD_strategy;
+typedef ZSTD_ErrorCode zstd_error_code;
 
 /**
- * struct ZSTD_compressionParameters - zstd compression parameters
+ * zstd_get_error_code() - translates an error function result to an error code
+ * @code:  The function result for which zstd_is_error(code) is true.
+ *
+ * Return: A unique error code for this error.
+ */
+zstd_error_code zstd_get_error_code(size_t code);
+
+/**
+ * zstd_get_error_name() - translates an error function result to a string
+ * @code:  The function result for which zstd_is_error(code) is true.
+ *
+ * Return: An error string corresponding to the error code.
+ */
+const char *zstd_get_error_name(size_t code);
+
+/**
+ * zstd_min_clevel() - minimum allowed compression level
+ *
+ * Return: The minimum allowed compression level.
+ */
+int zstd_min_clevel(void);
+
+/**
+ * zstd_max_clevel() - maximum allowed compression level
+ *
+ * Return: The maximum allowed compression level.
+ */
+int zstd_max_clevel(void);
+
+/* ======   Parameter Selection   ====== */
+
+/**
+ * enum zstd_strategy - zstd compression search strategy
+ *
+ * From faster to stronger. See zstd_lib.h.
+ */
+typedef ZSTD_strategy zstd_strategy;
+
+/**
+ * struct zstd_compression_parameters - zstd compression parameters
  * @windowLog:    Log of the largest match distance. Larger means more
  *                compression, and more memory needed during decompression.
- * @chainLog:     Fully searched segment. Larger means more compression, slower,
- *                and more memory (useless for fast).
+ * @chainLog:     Fully searched segment. Larger means more compression,
+ *                slower, and more memory (useless for fast).
  * @hashLog:      Dispatch table. Larger means more compression,
  *                slower, and more memory.
  * @searchLog:    Number of searches. Larger means more compression and slower.
@@ -141,1017 +100,348 @@
  * @targetLength: Acceptable match size for optimal parser (only). Larger means
  *                more compression, and slower.
  * @strategy:     The zstd compression strategy.
- */
-typedef struct {
-	unsigned int windowLog;
-	unsigned int chainLog;
-	unsigned int hashLog;
-	unsigned int searchLog;
-	unsigned int searchLength;
-	unsigned int targetLength;
-	ZSTD_strategy strategy;
-} ZSTD_compressionParameters;
-
-/**
- * struct ZSTD_frameParameters - zstd frame parameters
- * @contentSizeFlag: Controls whether content size will be present in the frame
- *                   header (when known).
- * @checksumFlag:    Controls whether a 32-bit checksum is generated at the end
- *                   of the frame for error detection.
- * @noDictIDFlag:    Controls whether dictID will be saved into the frame header
- *                   when using dictionary compression.
  *
- * The default value is all fields set to 0.
+ * See zstd_lib.h.
  */
-typedef struct {
-	unsigned int contentSizeFlag;
-	unsigned int checksumFlag;
-	unsigned int noDictIDFlag;
-} ZSTD_frameParameters;
+typedef ZSTD_compressionParameters zstd_compression_parameters;
 
 /**
- * struct ZSTD_parameters - zstd parameters
+ * struct zstd_frame_parameters - zstd frame parameters
+ * @contentSizeFlag: Controls whether content size will be present in the
+ *                   frame header (when known).
+ * @checksumFlag:    Controls whether a 32-bit checksum is generated at the
+ *                   end of the frame for error detection.
+ * @noDictIDFlag:    Controls whether dictID will be saved into the frame
+ *                   header when using dictionary compression.
+ *
+ * The default value is all fields set to 0. See zstd_lib.h.
+ */
+typedef ZSTD_frameParameters zstd_frame_parameters;
+
+/**
+ * struct zstd_parameters - zstd parameters
  * @cParams: The compression parameters.
  * @fParams: The frame parameters.
  */
-typedef struct {
-	ZSTD_compressionParameters cParams;
-	ZSTD_frameParameters fParams;
-} ZSTD_parameters;
+typedef ZSTD_parameters zstd_parameters;
 
 /**
- * ZSTD_getCParams() - returns ZSTD_compressionParameters for selected level
- * @compressionLevel: The compression level from 1 to ZSTD_maxCLevel().
- * @estimatedSrcSize: The estimated source size to compress or 0 if unknown.
- * @dictSize:         The dictionary size or 0 if a dictionary isn't being used.
+ * zstd_get_params() - returns zstd_parameters for selected level
+ * @level:              The compression level
+ * @estimated_src_size: The estimated source size to compress or 0
+ *                      if unknown.
  *
- * Return:            The selected ZSTD_compressionParameters.
+ * Return:              The selected zstd_parameters.
  */
-ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel,
-	unsigned long long estimatedSrcSize, size_t dictSize);
+zstd_parameters zstd_get_params(int level,
+	unsigned long long estimated_src_size);
+
+/* ======   Single-pass Compression   ====== */
+
+typedef ZSTD_CCtx zstd_cctx;
 
 /**
- * ZSTD_getParams() - returns ZSTD_parameters for selected level
- * @compressionLevel: The compression level from 1 to ZSTD_maxCLevel().
- * @estimatedSrcSize: The estimated source size to compress or 0 if unknown.
- * @dictSize:         The dictionary size or 0 if a dictionary isn't being used.
- *
- * The same as ZSTD_getCParams() except also selects the default frame
- * parameters (all zero).
- *
- * Return:            The selected ZSTD_parameters.
- */
-ZSTD_parameters ZSTD_getParams(int compressionLevel,
-	unsigned long long estimatedSrcSize, size_t dictSize);
-
-/*-*************************************
- * Explicit memory management
- **************************************/
-
-/**
- * ZSTD_CCtxWorkspaceBound() - amount of memory needed to initialize a ZSTD_CCtx
- * @cParams: The compression parameters to be used for compression.
+ * zstd_cctx_workspace_bound() - max memory needed to initialize a zstd_cctx
+ * @parameters: The compression parameters to be used.
  *
  * If multiple compression parameters might be used, the caller must call
- * ZSTD_CCtxWorkspaceBound() for each set of parameters and use the maximum
+ * zstd_cctx_workspace_bound() for each set of parameters and use the maximum
  * size.
  *
- * Return:   A lower bound on the size of the workspace that is passed to
- *           ZSTD_initCCtx().
+ * Return:      A lower bound on the size of the workspace that is passed to
+ *              zstd_init_cctx().
  */
-size_t ZSTD_CCtxWorkspaceBound(ZSTD_compressionParameters cParams);
+size_t zstd_cctx_workspace_bound(const zstd_compression_parameters *parameters);
 
 /**
- * struct ZSTD_CCtx - the zstd compression context
+ * zstd_init_cctx() - initialize a zstd compression context
+ * @workspace:      The workspace to emplace the context into. It must outlive
+ *                  the returned context.
+ * @workspace_size: The size of workspace. Use zstd_cctx_workspace_bound() to
+ *                  determine how large the workspace must be.
  *
- * When compressing many times it is recommended to allocate a context just once
- * and reuse it for each successive compression operation.
+ * Return:          A zstd compression context or NULL on error.
  */
-typedef struct ZSTD_CCtx_s ZSTD_CCtx;
-/**
- * ZSTD_initCCtx() - initialize a zstd compression context
- * @workspace:     The workspace to emplace the context into. It must outlive
- *                 the returned context.
- * @workspaceSize: The size of workspace. Use ZSTD_CCtxWorkspaceBound() to
- *                 determine how large the workspace must be.
- *
- * Return:         A compression context emplaced into workspace.
- */
-ZSTD_CCtx *ZSTD_initCCtx(void *workspace, size_t workspaceSize);
+zstd_cctx *zstd_init_cctx(void *workspace, size_t workspace_size);
 
 /**
- * ZSTD_compressCCtx() - compress src into dst
- * @ctx:         The context. Must have been initialized with a workspace at
- *               least as large as ZSTD_CCtxWorkspaceBound(params.cParams).
- * @dst:         The buffer to compress src into.
- * @dstCapacity: The size of the destination buffer. May be any size, but
- *               ZSTD_compressBound(srcSize) is guaranteed to be large enough.
- * @src:         The data to compress.
- * @srcSize:     The size of the data to compress.
- * @params:      The parameters to use for compression. See ZSTD_getParams().
+ * zstd_compress_cctx() - compress src into dst with the initialized parameters
+ * @cctx:         The context. Must have been initialized with zstd_init_cctx().
+ * @dst:          The buffer to compress src into.
+ * @dst_capacity: The size of the destination buffer. May be any size, but
+ *                ZSTD_compressBound(srcSize) is guaranteed to be large enough.
+ * @src:          The data to compress.
+ * @src_size:     The size of the data to compress.
+ * @parameters:   The compression parameters to be used.
  *
- * Return:       The compressed size or an error, which can be checked using
- *               ZSTD_isError().
+ * Return:        The compressed size or an error, which can be checked using
+ *                zstd_is_error().
  */
-size_t ZSTD_compressCCtx(ZSTD_CCtx *ctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize, ZSTD_parameters params);
+size_t zstd_compress_cctx(zstd_cctx *cctx, void *dst, size_t dst_capacity,
+	const void *src, size_t src_size, const zstd_parameters *parameters);
+
+/* ======   Single-pass Decompression   ====== */
+
+typedef ZSTD_DCtx zstd_dctx;
 
 /**
- * ZSTD_DCtxWorkspaceBound() - amount of memory needed to initialize a ZSTD_DCtx
+ * zstd_dctx_workspace_bound() - max memory needed to initialize a zstd_dctx
  *
  * Return: A lower bound on the size of the workspace that is passed to
- *         ZSTD_initDCtx().
+ *         zstd_init_dctx().
  */
-size_t ZSTD_DCtxWorkspaceBound(void);
+size_t zstd_dctx_workspace_bound(void);
 
 /**
- * struct ZSTD_DCtx - the zstd decompression context
+ * zstd_init_dctx() - initialize a zstd decompression context
+ * @workspace:      The workspace to emplace the context into. It must outlive
+ *                  the returned context.
+ * @workspace_size: The size of workspace. Use zstd_dctx_workspace_bound() to
+ *                  determine how large the workspace must be.
  *
- * When decompressing many times it is recommended to allocate a context just
- * once and reuse it for each successive decompression operation.
+ * Return:          A zstd decompression context or NULL on error.
  */
-typedef struct ZSTD_DCtx_s ZSTD_DCtx;
-/**
- * ZSTD_initDCtx() - initialize a zstd decompression context
- * @workspace:     The workspace to emplace the context into. It must outlive
- *                 the returned context.
- * @workspaceSize: The size of workspace. Use ZSTD_DCtxWorkspaceBound() to
- *                 determine how large the workspace must be.
- *
- * Return:         A decompression context emplaced into workspace.
- */
-ZSTD_DCtx *ZSTD_initDCtx(void *workspace, size_t workspaceSize);
+zstd_dctx *zstd_init_dctx(void *workspace, size_t workspace_size);
 
 /**
- * ZSTD_decompressDCtx() - decompress zstd compressed src into dst
- * @ctx:         The decompression context.
- * @dst:         The buffer to decompress src into.
- * @dstCapacity: The size of the destination buffer. Must be at least as large
- *               as the decompressed size. If the caller cannot upper bound the
- *               decompressed size, then it's better to use the streaming API.
- * @src:         The zstd compressed data to decompress. Multiple concatenated
- *               frames and skippable frames are allowed.
- * @srcSize:     The exact size of the data to decompress.
+ * zstd_decompress_dctx() - decompress zstd compressed src into dst
+ * @dctx:         The decompression context.
+ * @dst:          The buffer to decompress src into.
+ * @dst_capacity: The size of the destination buffer. Must be at least as large
+ *                as the decompressed size. If the caller cannot upper bound the
+ *                decompressed size, then it's better to use the streaming API.
+ * @src:          The zstd compressed data to decompress. Multiple concatenated
+ *                frames and skippable frames are allowed.
+ * @src_size:     The exact size of the data to decompress.
  *
- * Return:       The decompressed size or an error, which can be checked using
- *               ZSTD_isError().
+ * Return:        The decompressed size or an error, which can be checked using
+ *                zstd_is_error().
  */
-size_t ZSTD_decompressDCtx(ZSTD_DCtx *ctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
+size_t zstd_decompress_dctx(zstd_dctx *dctx, void *dst, size_t dst_capacity,
+	const void *src, size_t src_size);
 
-/*-************************
- * Simple dictionary API
- **************************/
+/* ======   Streaming Buffers   ====== */
 
 /**
- * ZSTD_compress_usingDict() - compress src into dst using a dictionary
- * @ctx:         The context. Must have been initialized with a workspace at
- *               least as large as ZSTD_CCtxWorkspaceBound(params.cParams).
- * @dst:         The buffer to compress src into.
- * @dstCapacity: The size of the destination buffer. May be any size, but
- *               ZSTD_compressBound(srcSize) is guaranteed to be large enough.
- * @src:         The data to compress.
- * @srcSize:     The size of the data to compress.
- * @dict:        The dictionary to use for compression.
- * @dictSize:    The size of the dictionary.
- * @params:      The parameters to use for compression. See ZSTD_getParams().
- *
- * Compression using a predefined dictionary. The same dictionary must be used
- * during decompression.
- *
- * Return:       The compressed size or an error, which can be checked using
- *               ZSTD_isError().
- */
-size_t ZSTD_compress_usingDict(ZSTD_CCtx *ctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize, const void *dict, size_t dictSize,
-	ZSTD_parameters params);
-
-/**
- * ZSTD_decompress_usingDict() - decompress src into dst using a dictionary
- * @ctx:         The decompression context.
- * @dst:         The buffer to decompress src into.
- * @dstCapacity: The size of the destination buffer. Must be at least as large
- *               as the decompressed size. If the caller cannot upper bound the
- *               decompressed size, then it's better to use the streaming API.
- * @src:         The zstd compressed data to decompress. Multiple concatenated
- *               frames and skippable frames are allowed.
- * @srcSize:     The exact size of the data to decompress.
- * @dict:        The dictionary to use for decompression. The same dictionary
- *               must've been used to compress the data.
- * @dictSize:    The size of the dictionary.
- *
- * Return:       The decompressed size or an error, which can be checked using
- *               ZSTD_isError().
- */
-size_t ZSTD_decompress_usingDict(ZSTD_DCtx *ctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize, const void *dict, size_t dictSize);
-
-/*-**************************
- * Fast dictionary API
- ***************************/
-
-/**
- * ZSTD_CDictWorkspaceBound() - memory needed to initialize a ZSTD_CDict
- * @cParams: The compression parameters to be used for compression.
- *
- * Return:   A lower bound on the size of the workspace that is passed to
- *           ZSTD_initCDict().
- */
-size_t ZSTD_CDictWorkspaceBound(ZSTD_compressionParameters cParams);
-
-/**
- * struct ZSTD_CDict - a digested dictionary to be used for compression
- */
-typedef struct ZSTD_CDict_s ZSTD_CDict;
-
-/**
- * ZSTD_initCDict() - initialize a digested dictionary for compression
- * @dictBuffer:    The dictionary to digest. The buffer is referenced by the
- *                 ZSTD_CDict so it must outlive the returned ZSTD_CDict.
- * @dictSize:      The size of the dictionary.
- * @params:        The parameters to use for compression. See ZSTD_getParams().
- * @workspace:     The workspace. It must outlive the returned ZSTD_CDict.
- * @workspaceSize: The workspace size. Must be at least
- *                 ZSTD_CDictWorkspaceBound(params.cParams).
- *
- * When compressing multiple messages / blocks with the same dictionary it is
- * recommended to load it just once. The ZSTD_CDict merely references the
- * dictBuffer, so it must outlive the returned ZSTD_CDict.
- *
- * Return:         The digested dictionary emplaced into workspace.
- */
-ZSTD_CDict *ZSTD_initCDict(const void *dictBuffer, size_t dictSize,
-	ZSTD_parameters params, void *workspace, size_t workspaceSize);
-
-/**
- * ZSTD_compress_usingCDict() - compress src into dst using a ZSTD_CDict
- * @ctx:         The context. Must have been initialized with a workspace at
- *               least as large as ZSTD_CCtxWorkspaceBound(cParams) where
- *               cParams are the compression parameters used to initialize the
- *               cdict.
- * @dst:         The buffer to compress src into.
- * @dstCapacity: The size of the destination buffer. May be any size, but
- *               ZSTD_compressBound(srcSize) is guaranteed to be large enough.
- * @src:         The data to compress.
- * @srcSize:     The size of the data to compress.
- * @cdict:       The digested dictionary to use for compression.
- * @params:      The parameters to use for compression. See ZSTD_getParams().
- *
- * Compression using a digested dictionary. The same dictionary must be used
- * during decompression.
- *
- * Return:       The compressed size or an error, which can be checked using
- *               ZSTD_isError().
- */
-size_t ZSTD_compress_usingCDict(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize, const ZSTD_CDict *cdict);
-
-
-/**
- * ZSTD_DDictWorkspaceBound() - memory needed to initialize a ZSTD_DDict
- *
- * Return:  A lower bound on the size of the workspace that is passed to
- *          ZSTD_initDDict().
- */
-size_t ZSTD_DDictWorkspaceBound(void);
-
-/**
- * struct ZSTD_DDict - a digested dictionary to be used for decompression
- */
-typedef struct ZSTD_DDict_s ZSTD_DDict;
-
-/**
- * ZSTD_initDDict() - initialize a digested dictionary for decompression
- * @dictBuffer:    The dictionary to digest. The buffer is referenced by the
- *                 ZSTD_DDict so it must outlive the returned ZSTD_DDict.
- * @dictSize:      The size of the dictionary.
- * @workspace:     The workspace. It must outlive the returned ZSTD_DDict.
- * @workspaceSize: The workspace size. Must be at least
- *                 ZSTD_DDictWorkspaceBound().
- *
- * When decompressing multiple messages / blocks with the same dictionary it is
- * recommended to load it just once. The ZSTD_DDict merely references the
- * dictBuffer, so it must outlive the returned ZSTD_DDict.
- *
- * Return:         The digested dictionary emplaced into workspace.
- */
-ZSTD_DDict *ZSTD_initDDict(const void *dictBuffer, size_t dictSize,
-	void *workspace, size_t workspaceSize);
-
-/**
- * ZSTD_decompress_usingDDict() - decompress src into dst using a ZSTD_DDict
- * @ctx:         The decompression context.
- * @dst:         The buffer to decompress src into.
- * @dstCapacity: The size of the destination buffer. Must be at least as large
- *               as the decompressed size. If the caller cannot upper bound the
- *               decompressed size, then it's better to use the streaming API.
- * @src:         The zstd compressed data to decompress. Multiple concatenated
- *               frames and skippable frames are allowed.
- * @srcSize:     The exact size of the data to decompress.
- * @ddict:       The digested dictionary to use for decompression. The same
- *               dictionary must've been used to compress the data.
- *
- * Return:       The decompressed size or an error, which can be checked using
- *               ZSTD_isError().
- */
-size_t ZSTD_decompress_usingDDict(ZSTD_DCtx *dctx, void *dst,
-	size_t dstCapacity, const void *src, size_t srcSize,
-	const ZSTD_DDict *ddict);
-
-
-/*-**************************
- * Streaming
- ***************************/
-
-/**
- * struct ZSTD_inBuffer - input buffer for streaming
+ * struct zstd_in_buffer - input buffer for streaming
  * @src:  Start of the input buffer.
  * @size: Size of the input buffer.
  * @pos:  Position where reading stopped. Will be updated.
  *        Necessarily 0 <= pos <= size.
+ *
+ * See zstd_lib.h.
  */
-typedef struct ZSTD_inBuffer_s {
-	const void *src;
-	size_t size;
-	size_t pos;
-} ZSTD_inBuffer;
+typedef ZSTD_inBuffer zstd_in_buffer;
 
 /**
- * struct ZSTD_outBuffer - output buffer for streaming
+ * struct zstd_out_buffer - output buffer for streaming
  * @dst:  Start of the output buffer.
  * @size: Size of the output buffer.
  * @pos:  Position where writing stopped. Will be updated.
  *        Necessarily 0 <= pos <= size.
+ *
+ * See zstd_lib.h.
  */
-typedef struct ZSTD_outBuffer_s {
-	void *dst;
-	size_t size;
-	size_t pos;
-} ZSTD_outBuffer;
+typedef ZSTD_outBuffer zstd_out_buffer;
 
+/* ======   Streaming Compression   ====== */
 
-
-/*-*****************************************************************************
- * Streaming compression - HowTo
- *
- * A ZSTD_CStream object is required to track streaming operation.
- * Use ZSTD_initCStream() to initialize a ZSTD_CStream object.
- * ZSTD_CStream objects can be reused multiple times on consecutive compression
- * operations. It is recommended to re-use ZSTD_CStream in situations where many
- * streaming operations will be achieved consecutively. Use one separate
- * ZSTD_CStream per thread for parallel execution.
- *
- * Use ZSTD_compressStream() repetitively to consume input stream.
- * The function will automatically update both `pos` fields.
- * Note that it may not consume the entire input, in which case `pos < size`,
- * and it's up to the caller to present again remaining data.
- * It returns a hint for the preferred number of bytes to use as an input for
- * the next function call.
- *
- * At any moment, it's possible to flush whatever data remains within internal
- * buffer, using ZSTD_flushStream(). `output->pos` will be updated. There might
- * still be some content left within the internal buffer if `output->size` is
- * too small. It returns the number of bytes left in the internal buffer and
- * must be called until it returns 0.
- *
- * ZSTD_endStream() instructs to finish a frame. It will perform a flush and
- * write frame epilogue. The epilogue is required for decoders to consider a
- * frame completed. Similar to ZSTD_flushStream(), it may not be able to flush
- * the full content if `output->size` is too small. In which case, call again
- * ZSTD_endStream() to complete the flush. It returns the number of bytes left
- * in the internal buffer and must be called until it returns 0.
- ******************************************************************************/
+typedef ZSTD_CStream zstd_cstream;
 
 /**
- * ZSTD_CStreamWorkspaceBound() - memory needed to initialize a ZSTD_CStream
- * @cParams: The compression parameters to be used for compression.
+ * zstd_cstream_workspace_bound() - memory needed to initialize a zstd_cstream
+ * @cparams: The compression parameters to be used for compression.
  *
  * Return:   A lower bound on the size of the workspace that is passed to
- *           ZSTD_initCStream() and ZSTD_initCStream_usingCDict().
+ *           zstd_init_cstream().
  */
-size_t ZSTD_CStreamWorkspaceBound(ZSTD_compressionParameters cParams);
+size_t zstd_cstream_workspace_bound(const zstd_compression_parameters *cparams);
 
 /**
- * struct ZSTD_CStream - the zstd streaming compression context
- */
-typedef struct ZSTD_CStream_s ZSTD_CStream;
-
-/*===== ZSTD_CStream management functions =====*/
-/**
- * ZSTD_initCStream() - initialize a zstd streaming compression context
- * @params:         The zstd compression parameters.
- * @pledgedSrcSize: If params.fParams.contentSizeFlag == 1 then the caller must
- *                  pass the source size (zero means empty source). Otherwise,
- *                  the caller may optionally pass the source size, or zero if
- *                  unknown.
- * @workspace:      The workspace to emplace the context into. It must outlive
- *                  the returned context.
- * @workspaceSize:  The size of workspace.
- *                  Use ZSTD_CStreamWorkspaceBound(params.cParams) to determine
- *                  how large the workspace must be.
+ * zstd_init_cstream() - initialize a zstd streaming compression context
+ * @parameters        The zstd parameters to use for compression.
+ * @pledged_src_size: If params.fParams.contentSizeFlag == 1 then the caller
+ *                    must pass the source size (zero means empty source).
+ *                    Otherwise, the caller may optionally pass the source
+ *                    size, or zero if unknown.
+ * @workspace:        The workspace to emplace the context into. It must outlive
+ *                    the returned context.
+ * @workspace_size:   The size of workspace.
+ *                    Use zstd_cstream_workspace_bound(params->cparams) to
+ *                    determine how large the workspace must be.
  *
- * Return:          The zstd streaming compression context.
+ * Return:            The zstd streaming compression context or NULL on error.
  */
-ZSTD_CStream *ZSTD_initCStream(ZSTD_parameters params,
-	unsigned long long pledgedSrcSize, void *workspace,
-	size_t workspaceSize);
+zstd_cstream *zstd_init_cstream(const zstd_parameters *parameters,
+	unsigned long long pledged_src_size, void *workspace, size_t workspace_size);
 
 /**
- * ZSTD_initCStream_usingCDict() - initialize a streaming compression context
- * @cdict:          The digested dictionary to use for compression.
- * @pledgedSrcSize: Optionally the source size, or zero if unknown.
- * @workspace:      The workspace to emplace the context into. It must outlive
- *                  the returned context.
- * @workspaceSize:  The size of workspace. Call ZSTD_CStreamWorkspaceBound()
- *                  with the cParams used to initialize the cdict to determine
- *                  how large the workspace must be.
- *
- * Return:          The zstd streaming compression context.
- */
-ZSTD_CStream *ZSTD_initCStream_usingCDict(const ZSTD_CDict *cdict,
-	unsigned long long pledgedSrcSize, void *workspace,
-	size_t workspaceSize);
-
-/*===== Streaming compression functions =====*/
-/**
- * ZSTD_resetCStream() - reset the context using parameters from creation
- * @zcs:            The zstd streaming compression context to reset.
- * @pledgedSrcSize: Optionally the source size, or zero if unknown.
+ * zstd_reset_cstream() - reset the context using parameters from creation
+ * @cstream:          The zstd streaming compression context to reset.
+ * @pledged_src_size: Optionally the source size, or zero if unknown.
  *
  * Resets the context using the parameters from creation. Skips dictionary
- * loading, since it can be reused. If `pledgedSrcSize` is non-zero the frame
+ * loading, since it can be reused. If `pledged_src_size` is non-zero the frame
  * content size is always written into the frame header.
  *
- * Return:          Zero or an error, which can be checked using ZSTD_isError().
+ * Return:            Zero or an error, which can be checked using
+ *                    zstd_is_error().
  */
-size_t ZSTD_resetCStream(ZSTD_CStream *zcs, unsigned long long pledgedSrcSize);
+size_t zstd_reset_cstream(zstd_cstream *cstream,
+	unsigned long long pledged_src_size);
+
 /**
- * ZSTD_compressStream() - streaming compress some of input into output
- * @zcs:    The zstd streaming compression context.
- * @output: Destination buffer. `output->pos` is updated to indicate how much
- *          compressed data was written.
- * @input:  Source buffer. `input->pos` is updated to indicate how much data was
- *          read. Note that it may not consume the entire input, in which case
- *          `input->pos < input->size`, and it's up to the caller to present
- *          remaining data again.
+ * zstd_compress_stream() - streaming compress some of input into output
+ * @cstream: The zstd streaming compression context.
+ * @output:  Destination buffer. `output->pos` is updated to indicate how much
+ *           compressed data was written.
+ * @input:   Source buffer. `input->pos` is updated to indicate how much data
+ *           was read. Note that it may not consume the entire input, in which
+ *           case `input->pos < input->size`, and it's up to the caller to
+ *           present remaining data again.
  *
  * The `input` and `output` buffers may be any size. Guaranteed to make some
  * forward progress if `input` and `output` are not empty.
  *
- * Return:  A hint for the number of bytes to use as the input for the next
- *          function call or an error, which can be checked using
- *          ZSTD_isError().
+ * Return:   A hint for the number of bytes to use as the input for the next
+ *           function call or an error, which can be checked using
+ *           zstd_is_error().
  */
-size_t ZSTD_compressStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output,
-	ZSTD_inBuffer *input);
+size_t zstd_compress_stream(zstd_cstream *cstream, zstd_out_buffer *output,
+	zstd_in_buffer *input);
+
 /**
- * ZSTD_flushStream() - flush internal buffers into output
- * @zcs:    The zstd streaming compression context.
- * @output: Destination buffer. `output->pos` is updated to indicate how much
- *          compressed data was written.
+ * zstd_flush_stream() - flush internal buffers into output
+ * @cstream: The zstd streaming compression context.
+ * @output:  Destination buffer. `output->pos` is updated to indicate how much
+ *           compressed data was written.
  *
- * ZSTD_flushStream() must be called until it returns 0, meaning all the data
- * has been flushed. Since ZSTD_flushStream() causes a block to be ended,
+ * zstd_flush_stream() must be called until it returns 0, meaning all the data
+ * has been flushed. Since zstd_flush_stream() causes a block to be ended,
  * calling it too often will degrade the compression ratio.
  *
- * Return:  The number of bytes still present within internal buffers or an
- *          error, which can be checked using ZSTD_isError().
+ * Return:   The number of bytes still present within internal buffers or an
+ *           error, which can be checked using zstd_is_error().
  */
-size_t ZSTD_flushStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output);
+size_t zstd_flush_stream(zstd_cstream *cstream, zstd_out_buffer *output);
+
 /**
- * ZSTD_endStream() - flush internal buffers into output and end the frame
- * @zcs:    The zstd streaming compression context.
- * @output: Destination buffer. `output->pos` is updated to indicate how much
- *          compressed data was written.
+ * zstd_end_stream() - flush internal buffers into output and end the frame
+ * @cstream: The zstd streaming compression context.
+ * @output:  Destination buffer. `output->pos` is updated to indicate how much
+ *           compressed data was written.
  *
- * ZSTD_endStream() must be called until it returns 0, meaning all the data has
+ * zstd_end_stream() must be called until it returns 0, meaning all the data has
  * been flushed and the frame epilogue has been written.
  *
- * Return:  The number of bytes still present within internal buffers or an
- *          error, which can be checked using ZSTD_isError().
+ * Return:   The number of bytes still present within internal buffers or an
+ *           error, which can be checked using zstd_is_error().
  */
-size_t ZSTD_endStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output);
+size_t zstd_end_stream(zstd_cstream *cstream, zstd_out_buffer *output);
+
+/* ======   Streaming Decompression   ====== */
+
+typedef ZSTD_DStream zstd_dstream;
 
 /**
- * ZSTD_CStreamInSize() - recommended size for the input buffer
+ * zstd_dstream_workspace_bound() - memory needed to initialize a zstd_dstream
+ * @max_window_size: The maximum window size allowed for compressed frames.
  *
- * Return: The recommended size for the input buffer.
+ * Return:           A lower bound on the size of the workspace that is passed
+ *                   to zstd_init_dstream().
  */
-size_t ZSTD_CStreamInSize(void);
-/**
- * ZSTD_CStreamOutSize() - recommended size for the output buffer
- *
- * When the output buffer is at least this large, it is guaranteed to be large
- * enough to flush at least one complete compressed block.
- *
- * Return: The recommended size for the output buffer.
- */
-size_t ZSTD_CStreamOutSize(void);
-
-
-
-/*-*****************************************************************************
- * Streaming decompression - HowTo
- *
- * A ZSTD_DStream object is required to track streaming operations.
- * Use ZSTD_initDStream() to initialize a ZSTD_DStream object.
- * ZSTD_DStream objects can be re-used multiple times.
- *
- * Use ZSTD_decompressStream() repetitively to consume your input.
- * The function will update both `pos` fields.
- * If `input->pos < input->size`, some input has not been consumed.
- * It's up to the caller to present again remaining data.
- * If `output->pos < output->size`, decoder has flushed everything it could.
- * Returns 0 iff a frame is completely decoded and fully flushed.
- * Otherwise it returns a suggested next input size that will never load more
- * than the current frame.
- ******************************************************************************/
+size_t zstd_dstream_workspace_bound(size_t max_window_size);
 
 /**
- * ZSTD_DStreamWorkspaceBound() - memory needed to initialize a ZSTD_DStream
- * @maxWindowSize: The maximum window size allowed for compressed frames.
+ * zstd_init_dstream() - initialize a zstd streaming decompression context
+ * @max_window_size: The maximum window size allowed for compressed frames.
+ * @workspace:       The workspace to emplace the context into. It must outlive
+ *                   the returned context.
+ * @workspaceSize:   The size of workspace.
+ *                   Use zstd_dstream_workspace_bound(max_window_size) to
+ *                   determine how large the workspace must be.
  *
- * Return:         A lower bound on the size of the workspace that is passed to
- *                 ZSTD_initDStream() and ZSTD_initDStream_usingDDict().
+ * Return:           The zstd streaming decompression context.
  */
-size_t ZSTD_DStreamWorkspaceBound(size_t maxWindowSize);
+zstd_dstream *zstd_init_dstream(size_t max_window_size, void *workspace,
+	size_t workspace_size);
 
 /**
- * struct ZSTD_DStream - the zstd streaming decompression context
- */
-typedef struct ZSTD_DStream_s ZSTD_DStream;
-/*===== ZSTD_DStream management functions =====*/
-/**
- * ZSTD_initDStream() - initialize a zstd streaming decompression context
- * @maxWindowSize: The maximum window size allowed for compressed frames.
- * @workspace:     The workspace to emplace the context into. It must outlive
- *                 the returned context.
- * @workspaceSize: The size of workspace.
- *                 Use ZSTD_DStreamWorkspaceBound(maxWindowSize) to determine
- *                 how large the workspace must be.
- *
- * Return:         The zstd streaming decompression context.
- */
-ZSTD_DStream *ZSTD_initDStream(size_t maxWindowSize, void *workspace,
-	size_t workspaceSize);
-/**
- * ZSTD_initDStream_usingDDict() - initialize streaming decompression context
- * @maxWindowSize: The maximum window size allowed for compressed frames.
- * @ddict:         The digested dictionary to use for decompression.
- * @workspace:     The workspace to emplace the context into. It must outlive
- *                 the returned context.
- * @workspaceSize: The size of workspace.
- *                 Use ZSTD_DStreamWorkspaceBound(maxWindowSize) to determine
- *                 how large the workspace must be.
- *
- * Return:         The zstd streaming decompression context.
- */
-ZSTD_DStream *ZSTD_initDStream_usingDDict(size_t maxWindowSize,
-	const ZSTD_DDict *ddict, void *workspace, size_t workspaceSize);
-
-/*===== Streaming decompression functions =====*/
-/**
- * ZSTD_resetDStream() - reset the context using parameters from creation
- * @zds:   The zstd streaming decompression context to reset.
+ * zstd_reset_dstream() - reset the context using parameters from creation
+ * @dstream: The zstd streaming decompression context to reset.
  *
  * Resets the context using the parameters from creation. Skips dictionary
  * loading, since it can be reused.
  *
- * Return: Zero or an error, which can be checked using ZSTD_isError().
+ * Return:   Zero or an error, which can be checked using zstd_is_error().
  */
-size_t ZSTD_resetDStream(ZSTD_DStream *zds);
+size_t zstd_reset_dstream(zstd_dstream *dstream);
+
 /**
- * ZSTD_decompressStream() - streaming decompress some of input into output
- * @zds:    The zstd streaming decompression context.
- * @output: Destination buffer. `output.pos` is updated to indicate how much
- *          decompressed data was written.
- * @input:  Source buffer. `input.pos` is updated to indicate how much data was
- *          read. Note that it may not consume the entire input, in which case
- *          `input.pos < input.size`, and it's up to the caller to present
- *          remaining data again.
+ * zstd_decompress_stream() - streaming decompress some of input into output
+ * @dstream: The zstd streaming decompression context.
+ * @output:  Destination buffer. `output.pos` is updated to indicate how much
+ *           decompressed data was written.
+ * @input:   Source buffer. `input.pos` is updated to indicate how much data was
+ *           read. Note that it may not consume the entire input, in which case
+ *           `input.pos < input.size`, and it's up to the caller to present
+ *           remaining data again.
  *
  * The `input` and `output` buffers may be any size. Guaranteed to make some
  * forward progress if `input` and `output` are not empty.
- * ZSTD_decompressStream() will not consume the last byte of the frame until
+ * zstd_decompress_stream() will not consume the last byte of the frame until
  * the entire frame is flushed.
  *
- * Return:  Returns 0 iff a frame is completely decoded and fully flushed.
- *          Otherwise returns a hint for the number of bytes to use as the input
- *          for the next function call or an error, which can be checked using
- *          ZSTD_isError(). The size hint will never load more than the frame.
+ * Return:   Returns 0 iff a frame is completely decoded and fully flushed.
+ *           Otherwise returns a hint for the number of bytes to use as the
+ *           input for the next function call or an error, which can be checked
+ *           using zstd_is_error(). The size hint will never load more than the
+ *           frame.
  */
-size_t ZSTD_decompressStream(ZSTD_DStream *zds, ZSTD_outBuffer *output,
-	ZSTD_inBuffer *input);
+size_t zstd_decompress_stream(zstd_dstream *dstream, zstd_out_buffer *output,
+	zstd_in_buffer *input);
+
+/* ======   Frame Inspection Functions ====== */
 
 /**
- * ZSTD_DStreamInSize() - recommended size for the input buffer
+ * zstd_find_frame_compressed_size() - returns the size of a compressed frame
+ * @src:      Source buffer. It should point to the start of a zstd encoded
+ *            frame or a skippable frame.
+ * @src_size: The size of the source buffer. It must be at least as large as the
+ *            size of the frame.
  *
- * Return: The recommended size for the input buffer.
+ * Return:    The compressed size of the frame pointed to by `src` or an error,
+ *            which can be check with zstd_is_error().
+ *            Suitable to pass to ZSTD_decompress() or similar functions.
  */
-size_t ZSTD_DStreamInSize(void);
-/**
- * ZSTD_DStreamOutSize() - recommended size for the output buffer
- *
- * When the output buffer is at least this large, it is guaranteed to be large
- * enough to flush at least one complete decompressed block.
- *
- * Return: The recommended size for the output buffer.
- */
-size_t ZSTD_DStreamOutSize(void);
-
-
-/* --- Constants ---*/
-#define ZSTD_MAGICNUMBER            0xFD2FB528   /* >= v0.8.0 */
-#define ZSTD_MAGIC_SKIPPABLE_START  0x184D2A50U
-
-#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1)
-#define ZSTD_CONTENTSIZE_ERROR   (0ULL - 2)
-
-#define ZSTD_WINDOWLOG_MAX_32  27
-#define ZSTD_WINDOWLOG_MAX_64  27
-#define ZSTD_WINDOWLOG_MAX \
-	((unsigned int)(sizeof(size_t) == 4 \
-		? ZSTD_WINDOWLOG_MAX_32 \
-		: ZSTD_WINDOWLOG_MAX_64))
-#define ZSTD_WINDOWLOG_MIN 10
-#define ZSTD_HASHLOG_MAX ZSTD_WINDOWLOG_MAX
-#define ZSTD_HASHLOG_MIN        6
-#define ZSTD_CHAINLOG_MAX     (ZSTD_WINDOWLOG_MAX+1)
-#define ZSTD_CHAINLOG_MIN      ZSTD_HASHLOG_MIN
-#define ZSTD_HASHLOG3_MAX      17
-#define ZSTD_SEARCHLOG_MAX    (ZSTD_WINDOWLOG_MAX-1)
-#define ZSTD_SEARCHLOG_MIN      1
-/* only for ZSTD_fast, other strategies are limited to 6 */
-#define ZSTD_SEARCHLENGTH_MAX   7
-/* only for ZSTD_btopt, other strategies are limited to 4 */
-#define ZSTD_SEARCHLENGTH_MIN   3
-#define ZSTD_TARGETLENGTH_MIN   4
-#define ZSTD_TARGETLENGTH_MAX 999
-
-/* for static allocation */
-#define ZSTD_FRAMEHEADERSIZE_MAX 18
-#define ZSTD_FRAMEHEADERSIZE_MIN  6
-#define ZSTD_frameHeaderSize_prefix 5
-#define ZSTD_frameHeaderSize_min ZSTD_FRAMEHEADERSIZE_MIN
-#define ZSTD_frameHeaderSize_max ZSTD_FRAMEHEADERSIZE_MAX
-/* magic number + skippable frame length */
-#define ZSTD_skippableHeaderSize 8
-
-
-/*-*************************************
- * Compressed size functions
- **************************************/
+size_t zstd_find_frame_compressed_size(const void *src, size_t src_size);
 
 /**
- * ZSTD_findFrameCompressedSize() - returns the size of a compressed frame
- * @src:     Source buffer. It should point to the start of a zstd encoded frame
- *           or a skippable frame.
- * @srcSize: The size of the source buffer. It must be at least as large as the
- *           size of the frame.
- *
- * Return:   The compressed size of the frame pointed to by `src` or an error,
- *           which can be check with ZSTD_isError().
- *           Suitable to pass to ZSTD_decompress() or similar functions.
- */
-size_t ZSTD_findFrameCompressedSize(const void *src, size_t srcSize);
-
-/*-*************************************
- * Decompressed size functions
- **************************************/
-/**
- * ZSTD_getFrameContentSize() - returns the content size in a zstd frame header
- * @src:     It should point to the start of a zstd encoded frame.
- * @srcSize: The size of the source buffer. It must be at least as large as the
- *           frame header. `ZSTD_frameHeaderSize_max` is always large enough.
- *
- * Return:   The frame content size stored in the frame header if known.
- *           `ZSTD_CONTENTSIZE_UNKNOWN` if the content size isn't stored in the
- *           frame header. `ZSTD_CONTENTSIZE_ERROR` on invalid input.
- */
-unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize);
-
-/**
- * ZSTD_findDecompressedSize() - returns decompressed size of a series of frames
- * @src:     It should point to the start of a series of zstd encoded and/or
- *           skippable frames.
- * @srcSize: The exact size of the series of frames.
- *
- * If any zstd encoded frame in the series doesn't have the frame content size
- * set, `ZSTD_CONTENTSIZE_UNKNOWN` is returned. But frame content size is always
- * set when using ZSTD_compress(). The decompressed size can be very large.
- * If the source is untrusted, the decompressed size could be wrong or
- * intentionally modified. Always ensure the result fits within the
- * application's authorized limits. ZSTD_findDecompressedSize() handles multiple
- * frames, and so it must traverse the input to read each frame header. This is
- * efficient as most of the data is skipped, however it does mean that all frame
- * data must be present and valid.
- *
- * Return:   Decompressed size of all the data contained in the frames if known.
- *           `ZSTD_CONTENTSIZE_UNKNOWN` if the decompressed size is unknown.
- *           `ZSTD_CONTENTSIZE_ERROR` if an error occurred.
- */
-unsigned long long ZSTD_findDecompressedSize(const void *src, size_t srcSize);
-
-/*-*************************************
- * Advanced compression functions
- **************************************/
-/**
- * ZSTD_checkCParams() - ensure parameter values remain within authorized range
- * @cParams: The zstd compression parameters.
- *
- * Return:   Zero or an error, which can be checked using ZSTD_isError().
- */
-size_t ZSTD_checkCParams(ZSTD_compressionParameters cParams);
-
-/**
- * ZSTD_adjustCParams() - optimize parameters for a given srcSize and dictSize
- * @srcSize:  Optionally the estimated source size, or zero if unknown.
- * @dictSize: Optionally the estimated dictionary size, or zero if unknown.
- *
- * Return:    The optimized parameters.
- */
-ZSTD_compressionParameters ZSTD_adjustCParams(
-	ZSTD_compressionParameters cParams, unsigned long long srcSize,
-	size_t dictSize);
-
-/*--- Advanced decompression functions ---*/
-
-/**
- * ZSTD_isFrame() - returns true iff the buffer starts with a valid frame
- * @buffer: The source buffer to check.
- * @size:   The size of the source buffer, must be at least 4 bytes.
- *
- * Return: True iff the buffer starts with a zstd or skippable frame identifier.
- */
-unsigned int ZSTD_isFrame(const void *buffer, size_t size);
-
-/**
- * ZSTD_getDictID_fromDict() - returns the dictionary id stored in a dictionary
- * @dict:     The dictionary buffer.
- * @dictSize: The size of the dictionary buffer.
- *
- * Return:    The dictionary id stored within the dictionary or 0 if the
- *            dictionary is not a zstd dictionary. If it returns 0 the
- *            dictionary can still be loaded as a content-only dictionary.
- */
-unsigned int ZSTD_getDictID_fromDict(const void *dict, size_t dictSize);
-
-/**
- * ZSTD_getDictID_fromDDict() - returns the dictionary id stored in a ZSTD_DDict
- * @ddict: The ddict to find the id of.
- *
- * Return: The dictionary id stored within `ddict` or 0 if the dictionary is not
- *         a zstd dictionary. If it returns 0 `ddict` will be loaded as a
- *         content-only dictionary.
- */
-unsigned int ZSTD_getDictID_fromDDict(const ZSTD_DDict *ddict);
-
-/**
- * ZSTD_getDictID_fromFrame() - returns the dictionary id stored in a zstd frame
- * @src:     Source buffer. It must be a zstd encoded frame.
- * @srcSize: The size of the source buffer. It must be at least as large as the
- *           frame header. `ZSTD_frameHeaderSize_max` is always large enough.
- *
- * Return:   The dictionary id required to decompress the frame stored within
- *           `src` or 0 if the dictionary id could not be decoded. It can return
- *           0 if the frame does not require a dictionary, the dictionary id
- *           wasn't stored in the frame, `src` is not a zstd frame, or `srcSize`
- *           is too small.
- */
-unsigned int ZSTD_getDictID_fromFrame(const void *src, size_t srcSize);
-
-/**
- * struct ZSTD_frameParams - zstd frame parameters stored in the frame header
- * @frameContentSize: The frame content size, or 0 if not present.
+ * struct zstd_frame_params - zstd frame parameters stored in the frame header
+ * @frameContentSize: The frame content size, or ZSTD_CONTENTSIZE_UNKNOWN if not
+ *                    present.
  * @windowSize:       The window size, or 0 if the frame is a skippable frame.
+ * @blockSizeMax:     The maximum block size.
+ * @frameType:        The frame type (zstd or skippable)
+ * @headerSize:       The size of the frame header.
  * @dictID:           The dictionary id, or 0 if not present.
  * @checksumFlag:     Whether a checksum was used.
+ *
+ * See zstd_lib.h.
  */
-typedef struct {
-	unsigned long long frameContentSize;
-	unsigned int windowSize;
-	unsigned int dictID;
-	unsigned int checksumFlag;
-} ZSTD_frameParams;
+typedef ZSTD_frameHeader zstd_frame_header;
 
 /**
- * ZSTD_getFrameParams() - extracts parameters from a zstd or skippable frame
- * @fparamsPtr: On success the frame parameters are written here.
- * @src:        The source buffer. It must point to a zstd or skippable frame.
- * @srcSize:    The size of the source buffer. `ZSTD_frameHeaderSize_max` is
- *              always large enough to succeed.
+ * zstd_get_frame_header() - extracts parameters from a zstd or skippable frame
+ * @params:   On success the frame parameters are written here.
+ * @src:      The source buffer. It must point to a zstd or skippable frame.
+ * @src_size: The size of the source buffer.
  *
- * Return:      0 on success. If more data is required it returns how many bytes
- *              must be provided to make forward progress. Otherwise it returns
- *              an error, which can be checked using ZSTD_isError().
+ * Return:    0 on success. If more data is required it returns how many bytes
+ *            must be provided to make forward progress. Otherwise it returns
+ *            an error, which can be checked using zstd_is_error().
  */
-size_t ZSTD_getFrameParams(ZSTD_frameParams *fparamsPtr, const void *src,
-	size_t srcSize);
+size_t zstd_get_frame_header(zstd_frame_header *params, const void *src,
+	size_t src_size);
 
-/*-*****************************************************************************
- * Buffer-less and synchronous inner streaming functions
- *
- * This is an advanced API, giving full control over buffer management, for
- * users which need direct control over memory.
- * But it's also a complex one, with many restrictions (documented below).
- * Prefer using normal streaming API for an easier experience
- ******************************************************************************/
-
-/*-*****************************************************************************
- * Buffer-less streaming compression (synchronous mode)
- *
- * A ZSTD_CCtx object is required to track streaming operations.
- * Use ZSTD_initCCtx() to initialize a context.
- * ZSTD_CCtx object can be re-used multiple times within successive compression
- * operations.
- *
- * Start by initializing a context.
- * Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary
- * compression,
- * or ZSTD_compressBegin_advanced(), for finer parameter control.
- * It's also possible to duplicate a reference context which has already been
- * initialized, using ZSTD_copyCCtx()
- *
- * Then, consume your input using ZSTD_compressContinue().
- * There are some important considerations to keep in mind when using this
- * advanced function :
- * - ZSTD_compressContinue() has no internal buffer. It uses externally provided
- *   buffer only.
- * - Interface is synchronous : input is consumed entirely and produce 1+
- *   (or more) compressed blocks.
- * - Caller must ensure there is enough space in `dst` to store compressed data
- *   under worst case scenario. Worst case evaluation is provided by
- *   ZSTD_compressBound().
- *   ZSTD_compressContinue() doesn't guarantee recover after a failed
- *   compression.
- * - ZSTD_compressContinue() presumes prior input ***is still accessible and
- *   unmodified*** (up to maximum distance size, see WindowLog).
- *   It remembers all previous contiguous blocks, plus one separated memory
- *   segment (which can itself consists of multiple contiguous blocks)
- * - ZSTD_compressContinue() detects that prior input has been overwritten when
- *   `src` buffer overlaps. In which case, it will "discard" the relevant memory
- *   section from its history.
- *
- * Finish a frame with ZSTD_compressEnd(), which will write the last block(s)
- * and optional checksum. It's possible to use srcSize==0, in which case, it
- * will write a final empty block to end the frame. Without last block mark,
- * frames will be considered unfinished (corrupted) by decoders.
- *
- * `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress some new
- * frame.
- ******************************************************************************/
-
-/*=====   Buffer-less streaming compression functions  =====*/
-size_t ZSTD_compressBegin(ZSTD_CCtx *cctx, int compressionLevel);
-size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx *cctx, const void *dict,
-	size_t dictSize, int compressionLevel);
-size_t ZSTD_compressBegin_advanced(ZSTD_CCtx *cctx, const void *dict,
-	size_t dictSize, ZSTD_parameters params,
-	unsigned long long pledgedSrcSize);
-size_t ZSTD_copyCCtx(ZSTD_CCtx *cctx, const ZSTD_CCtx *preparedCCtx,
-	unsigned long long pledgedSrcSize);
-size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx *cctx, const ZSTD_CDict *cdict,
-	unsigned long long pledgedSrcSize);
-size_t ZSTD_compressContinue(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-size_t ZSTD_compressEnd(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-
-
-
-/*-*****************************************************************************
- * Buffer-less streaming decompression (synchronous mode)
- *
- * A ZSTD_DCtx object is required to track streaming operations.
- * Use ZSTD_initDCtx() to initialize a context.
- * A ZSTD_DCtx object can be re-used multiple times.
- *
- * First typical operation is to retrieve frame parameters, using
- * ZSTD_getFrameParams(). It fills a ZSTD_frameParams structure which provide
- * important information to correctly decode the frame, such as the minimum
- * rolling buffer size to allocate to decompress data (`windowSize`), and the
- * dictionary ID used.
- * Note: content size is optional, it may not be present. 0 means unknown.
- * Note that these values could be wrong, either because of data malformation,
- * or because an attacker is spoofing deliberate false information. As a
- * consequence, check that values remain within valid application range,
- * especially `windowSize`, before allocation. Each application can set its own
- * limit, depending on local restrictions. For extended interoperability, it is
- * recommended to support at least 8 MB.
- * Frame parameters are extracted from the beginning of the compressed frame.
- * Data fragment must be large enough to ensure successful decoding, typically
- * `ZSTD_frameHeaderSize_max` bytes.
- * Result: 0: successful decoding, the `ZSTD_frameParams` structure is filled.
- *        >0: `srcSize` is too small, provide at least this many bytes.
- *        errorCode, which can be tested using ZSTD_isError().
- *
- * Start decompression, with ZSTD_decompressBegin() or
- * ZSTD_decompressBegin_usingDict(). Alternatively, you can copy a prepared
- * context, using ZSTD_copyDCtx().
- *
- * Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue()
- * alternatively.
- * ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize'
- * to ZSTD_decompressContinue().
- * ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will
- * fail.
- *
- * The result of ZSTD_decompressContinue() is the number of bytes regenerated
- * within 'dst' (necessarily <= dstCapacity). It can be zero, which is not an
- * error; it just means ZSTD_decompressContinue() has decoded some metadata
- * item. It can also be an error code, which can be tested with ZSTD_isError().
- *
- * ZSTD_decompressContinue() needs previous data blocks during decompression, up
- * to `windowSize`. They should preferably be located contiguously, prior to
- * current block. Alternatively, a round buffer of sufficient size is also
- * possible. Sufficient size is determined by frame parameters.
- * ZSTD_decompressContinue() is very sensitive to contiguity, if 2 blocks don't
- * follow each other, make sure that either the compressor breaks contiguity at
- * the same place, or that previous contiguous segment is large enough to
- * properly handle maximum back-reference.
- *
- * A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero.
- * Context can then be reset to start a new decompression.
- *
- * Note: it's possible to know if next input to present is a header or a block,
- * using ZSTD_nextInputType(). This information is not required to properly
- * decode a frame.
- *
- * == Special case: skippable frames ==
- *
- * Skippable frames allow integration of user-defined data into a flow of
- * concatenated frames. Skippable frames will be ignored (skipped) by a
- * decompressor. The format of skippable frames is as follows:
- * a) Skippable frame ID - 4 Bytes, Little endian format, any value from
- *    0x184D2A50 to 0x184D2A5F
- * b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits
- * c) Frame Content - any content (User Data) of length equal to Frame Size
- * For skippable frames ZSTD_decompressContinue() always returns 0.
- * For skippable frames ZSTD_getFrameParams() returns fparamsPtr->windowLog==0
- * what means that a frame is skippable.
- * Note: If fparamsPtr->frameContentSize==0, it is ambiguous: the frame might
- *       actually be a zstd encoded frame with no content. For purposes of
- *       decompression, it is valid in both cases to skip the frame using
- *       ZSTD_findFrameCompressedSize() to find its size in bytes.
- * It also returns frame size as fparamsPtr->frameContentSize.
- ******************************************************************************/
-
-/*=====   Buffer-less streaming decompression functions  =====*/
-size_t ZSTD_decompressBegin(ZSTD_DCtx *dctx);
-size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx *dctx, const void *dict,
-	size_t dictSize);
-void   ZSTD_copyDCtx(ZSTD_DCtx *dctx, const ZSTD_DCtx *preparedDCtx);
-size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx *dctx);
-size_t ZSTD_decompressContinue(ZSTD_DCtx *dctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-typedef enum {
-	ZSTDnit_frameHeader,
-	ZSTDnit_blockHeader,
-	ZSTDnit_block,
-	ZSTDnit_lastBlock,
-	ZSTDnit_checksum,
-	ZSTDnit_skippableFrame
-} ZSTD_nextInputType_e;
-ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx *dctx);
-
-/*-*****************************************************************************
- * Block functions
- *
- * Block functions produce and decode raw zstd blocks, without frame metadata.
- * Frame metadata cost is typically ~18 bytes, which can be non-negligible for
- * very small blocks (< 100 bytes). User will have to take in charge required
- * information to regenerate data, such as compressed and content sizes.
- *
- * A few rules to respect:
- * - Compressing and decompressing require a context structure
- *   + Use ZSTD_initCCtx() and ZSTD_initDCtx()
- * - It is necessary to init context before starting
- *   + compression : ZSTD_compressBegin()
- *   + decompression : ZSTD_decompressBegin()
- *   + variants _usingDict() are also allowed
- *   + copyCCtx() and copyDCtx() work too
- * - Block size is limited, it must be <= ZSTD_getBlockSizeMax()
- *   + If you need to compress more, cut data into multiple blocks
- *   + Consider using the regular ZSTD_compress() instead, as frame metadata
- *     costs become negligible when source size is large.
- * - When a block is considered not compressible enough, ZSTD_compressBlock()
- *   result will be zero. In which case, nothing is produced into `dst`.
- *   + User must test for such outcome and deal directly with uncompressed data
- *   + ZSTD_decompressBlock() doesn't accept uncompressed data as input!!!
- *   + In case of multiple successive blocks, decoder must be informed of
- *     uncompressed block existence to follow proper history. Use
- *     ZSTD_insertBlock() in such a case.
- ******************************************************************************/
-
-/* Define for static allocation */
-#define ZSTD_BLOCKSIZE_ABSOLUTEMAX (128 * 1024)
-/*=====   Raw zstd block functions  =====*/
-size_t ZSTD_getBlockSizeMax(ZSTD_CCtx *cctx);
-size_t ZSTD_compressBlock(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-size_t ZSTD_decompressBlock(ZSTD_DCtx *dctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-size_t ZSTD_insertBlock(ZSTD_DCtx *dctx, const void *blockStart,
-	size_t blockSize);
-
-#endif  /* ZSTD_H */
+#endif  /* LINUX_ZSTD_H */
diff --git a/include/linux/zstd_errors.h b/include/linux/zstd_errors.h
new file mode 100644
index 0000000..58b6dd4
--- /dev/null
+++ b/include/linux/zstd_errors.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_ERRORS_H_398273423
+#define ZSTD_ERRORS_H_398273423
+
+
+/*===== dependency =====*/
+#include <linux/types.h>   /* size_t */
+
+
+/* =====   ZSTDERRORLIB_API : control library symbols visibility   ===== */
+#define ZSTDERRORLIB_VISIBILITY 
+#define ZSTDERRORLIB_API ZSTDERRORLIB_VISIBILITY
+
+/*-*********************************************
+ *  Error codes list
+ *-*********************************************
+ *  Error codes _values_ are pinned down since v1.3.1 only.
+ *  Therefore, don't rely on values if you may link to any version < v1.3.1.
+ *
+ *  Only values < 100 are considered stable.
+ *
+ *  note 1 : this API shall be used with static linking only.
+ *           dynamic linking is not yet officially supported.
+ *  note 2 : Prefer relying on the enum than on its value whenever possible
+ *           This is the only supported way to use the error list < v1.3.1
+ *  note 3 : ZSTD_isError() is always correct, whatever the library version.
+ **********************************************/
+typedef enum {
+  ZSTD_error_no_error = 0,
+  ZSTD_error_GENERIC  = 1,
+  ZSTD_error_prefix_unknown                = 10,
+  ZSTD_error_version_unsupported           = 12,
+  ZSTD_error_frameParameter_unsupported    = 14,
+  ZSTD_error_frameParameter_windowTooLarge = 16,
+  ZSTD_error_corruption_detected = 20,
+  ZSTD_error_checksum_wrong      = 22,
+  ZSTD_error_dictionary_corrupted      = 30,
+  ZSTD_error_dictionary_wrong          = 32,
+  ZSTD_error_dictionaryCreation_failed = 34,
+  ZSTD_error_parameter_unsupported   = 40,
+  ZSTD_error_parameter_outOfBound    = 42,
+  ZSTD_error_tableLog_tooLarge       = 44,
+  ZSTD_error_maxSymbolValue_tooLarge = 46,
+  ZSTD_error_maxSymbolValue_tooSmall = 48,
+  ZSTD_error_stage_wrong       = 60,
+  ZSTD_error_init_missing      = 62,
+  ZSTD_error_memory_allocation = 64,
+  ZSTD_error_workSpace_tooSmall= 66,
+  ZSTD_error_dstSize_tooSmall = 70,
+  ZSTD_error_srcSize_wrong    = 72,
+  ZSTD_error_dstBuffer_null   = 74,
+  /* following error codes are __NOT STABLE__, they can be removed or changed in future versions */
+  ZSTD_error_frameIndex_tooLarge = 100,
+  ZSTD_error_seekableIO          = 102,
+  ZSTD_error_dstBuffer_wrong     = 104,
+  ZSTD_error_srcBuffer_wrong     = 105,
+  ZSTD_error_maxCode = 120  /* never EVER use this value directly, it can change in future versions! Use ZSTD_isError() instead */
+} ZSTD_ErrorCode;
+
+/*! ZSTD_getErrorCode() :
+    convert a `size_t` function result into a `ZSTD_ErrorCode` enum type,
+    which can be used to compare with enum list published above */
+ZSTDERRORLIB_API ZSTD_ErrorCode ZSTD_getErrorCode(size_t functionResult);
+ZSTDERRORLIB_API const char* ZSTD_getErrorString(ZSTD_ErrorCode code);   /*< Same as ZSTD_getErrorName, but using a `ZSTD_ErrorCode` enum argument */
+
+
+
+#endif /* ZSTD_ERRORS_H_398273423 */
diff --git a/include/linux/zstd_lib.h b/include/linux/zstd_lib.h
new file mode 100644
index 0000000..b8c7dbf9
--- /dev/null
+++ b/include/linux/zstd_lib.h
@@ -0,0 +1,2432 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_H_235446
+#define ZSTD_H_235446
+
+/* ======   Dependency   ======*/
+#include <linux/limits.h>   /* INT_MAX */
+#include <linux/types.h>   /* size_t */
+
+
+/* =====   ZSTDLIB_API : control library symbols visibility   ===== */
+#define ZSTDLIB_VISIBILITY 
+#define ZSTDLIB_API ZSTDLIB_VISIBILITY
+
+
+/* *****************************************************************************
+  Introduction
+
+  zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
+  real-time compression scenarios at zlib-level and better compression ratios.
+  The zstd compression library provides in-memory compression and decompression
+  functions.
+
+  The library supports regular compression levels from 1 up to ZSTD_maxCLevel(),
+  which is currently 22. Levels >= 20, labeled `--ultra`, should be used with
+  caution, as they require more memory. The library also offers negative
+  compression levels, which extend the range of speed vs. ratio preferences.
+  The lower the level, the faster the speed (at the cost of compression).
+
+  Compression can be done in:
+    - a single step (described as Simple API)
+    - a single step, reusing a context (described as Explicit context)
+    - unbounded multiple steps (described as Streaming compression)
+
+  The compression ratio achievable on small data can be highly improved using
+  a dictionary. Dictionary compression can be performed in:
+    - a single step (described as Simple dictionary API)
+    - a single step, reusing a dictionary (described as Bulk-processing
+      dictionary API)
+
+  Advanced experimental functions can be accessed using
+  `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h.
+
+  Advanced experimental APIs should never be used with a dynamically-linked
+  library. They are not "stable"; their definitions or signatures may change in
+  the future. Only static linking is allowed.
+*******************************************************************************/
+
+/*------   Version   ------*/
+#define ZSTD_VERSION_MAJOR    1
+#define ZSTD_VERSION_MINOR    4
+#define ZSTD_VERSION_RELEASE  10
+#define ZSTD_VERSION_NUMBER  (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE)
+
+/*! ZSTD_versionNumber() :
+ *  Return runtime library version, the value is (MAJOR*100*100 + MINOR*100 + RELEASE). */
+ZSTDLIB_API unsigned ZSTD_versionNumber(void);
+
+#define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE
+#define ZSTD_QUOTE(str) #str
+#define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str)
+#define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION)
+
+/*! ZSTD_versionString() :
+ *  Return runtime library version, like "1.4.5". Requires v1.3.0+. */
+ZSTDLIB_API const char* ZSTD_versionString(void);
+
+/* *************************************
+ *  Default constant
+ ***************************************/
+#ifndef ZSTD_CLEVEL_DEFAULT
+#  define ZSTD_CLEVEL_DEFAULT 3
+#endif
+
+/* *************************************
+ *  Constants
+ ***************************************/
+
+/* All magic numbers are supposed read/written to/from files/memory using little-endian convention */
+#define ZSTD_MAGICNUMBER            0xFD2FB528    /* valid since v0.8.0 */
+#define ZSTD_MAGIC_DICTIONARY       0xEC30A437    /* valid since v0.7.0 */
+#define ZSTD_MAGIC_SKIPPABLE_START  0x184D2A50    /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */
+#define ZSTD_MAGIC_SKIPPABLE_MASK   0xFFFFFFF0
+
+#define ZSTD_BLOCKSIZELOG_MAX  17
+#define ZSTD_BLOCKSIZE_MAX     (1<<ZSTD_BLOCKSIZELOG_MAX)
+
+
+
+/* *************************************
+*  Simple API
+***************************************/
+/*! ZSTD_compress() :
+ *  Compresses `src` content as a single zstd compressed frame into already allocated `dst`.
+ *  Hint : compression runs faster if `dstCapacity` >=  `ZSTD_compressBound(srcSize)`.
+ *  @return : compressed size written into `dst` (<= `dstCapacity),
+ *            or an error code if it fails (which can be tested using ZSTD_isError()). */
+ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity,
+                            const void* src, size_t srcSize,
+                                  int compressionLevel);
+
+/*! ZSTD_decompress() :
+ *  `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames.
+ *  `dstCapacity` is an upper bound of originalSize to regenerate.
+ *  If user cannot imply a maximum upper bound, it's better to use streaming mode to decompress data.
+ *  @return : the number of bytes decompressed into `dst` (<= `dstCapacity`),
+ *            or an errorCode if it fails (which can be tested using ZSTD_isError()). */
+ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity,
+                              const void* src, size_t compressedSize);
+
+/*! ZSTD_getFrameContentSize() : requires v1.3.0+
+ *  `src` should point to the start of a ZSTD encoded frame.
+ *  `srcSize` must be at least as large as the frame header.
+ *            hint : any size >= `ZSTD_frameHeaderSize_max` is large enough.
+ *  @return : - decompressed size of `src` frame content, if known
+ *            - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined
+ *            - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small)
+ *   note 1 : a 0 return value means the frame is valid but "empty".
+ *   note 2 : decompressed size is an optional field, it may not be present, typically in streaming mode.
+ *            When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *            Optionally, application can rely on some implicit limit,
+ *            as ZSTD_decompress() only needs an upper bound of decompressed size.
+ *            (For example, data could be necessarily cut into blocks <= 16 KB).
+ *   note 3 : decompressed size is always present when compression is completed using single-pass functions,
+ *            such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict().
+ *   note 4 : decompressed size can be very large (64-bits value),
+ *            potentially larger than what local system can handle as a single memory segment.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *   note 5 : If source is untrusted, decompressed size could be wrong or intentionally modified.
+ *            Always ensure return value fits within application's authorized limits.
+ *            Each application can set its own limits.
+ *   note 6 : This function replaces ZSTD_getDecompressedSize() */
+#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1)
+#define ZSTD_CONTENTSIZE_ERROR   (0ULL - 2)
+ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize);
+
+/*! ZSTD_getDecompressedSize() :
+ *  NOTE: This function is now obsolete, in favor of ZSTD_getFrameContentSize().
+ *  Both functions work the same way, but ZSTD_getDecompressedSize() blends
+ *  "empty", "unknown" and "error" results to the same return value (0),
+ *  while ZSTD_getFrameContentSize() gives them separate return values.
+ * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */
+ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize);
+
+/*! ZSTD_findFrameCompressedSize() :
+ * `src` should point to the start of a ZSTD frame or skippable frame.
+ * `srcSize` must be >= first frame size
+ * @return : the compressed size of the first frame starting at `src`,
+ *           suitable to pass as `srcSize` to `ZSTD_decompress` or similar,
+ *        or an error code if input is invalid */
+ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize);
+
+
+/*======  Helper functions  ======*/
+#define ZSTD_COMPRESSBOUND(srcSize)   ((srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0))  /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */
+ZSTDLIB_API size_t      ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */
+ZSTDLIB_API unsigned    ZSTD_isError(size_t code);          /*!< tells if a `size_t` function result is an error code */
+ZSTDLIB_API const char* ZSTD_getErrorName(size_t code);     /*!< provides readable string from an error code */
+ZSTDLIB_API int         ZSTD_minCLevel(void);               /*!< minimum negative compression level allowed */
+ZSTDLIB_API int         ZSTD_maxCLevel(void);               /*!< maximum compression level available */
+
+
+/* *************************************
+*  Explicit context
+***************************************/
+/*= Compression context
+ *  When compressing many times,
+ *  it is recommended to allocate a context just once,
+ *  and re-use it for each successive compression operation.
+ *  This will make workload friendlier for system's memory.
+ *  Note : re-using context is just a speed / resource optimization.
+ *         It doesn't change the compression ratio, which remains identical.
+ *  Note 2 : In multi-threaded environments,
+ *         use one different context per thread for parallel execution.
+ */
+typedef struct ZSTD_CCtx_s ZSTD_CCtx;
+ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void);
+ZSTDLIB_API size_t     ZSTD_freeCCtx(ZSTD_CCtx* cctx);  /* accept NULL pointer */
+
+/*! ZSTD_compressCCtx() :
+ *  Same as ZSTD_compress(), using an explicit ZSTD_CCtx.
+ *  Important : in order to behave similarly to `ZSTD_compress()`,
+ *  this function compresses at requested compression level,
+ *  __ignoring any other parameter__ .
+ *  If any advanced parameter was set using the advanced API,
+ *  they will all be reset. Only `compressionLevel` remains.
+ */
+ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx,
+                                     void* dst, size_t dstCapacity,
+                               const void* src, size_t srcSize,
+                                     int compressionLevel);
+
+/*= Decompression context
+ *  When decompressing many times,
+ *  it is recommended to allocate a context only once,
+ *  and re-use it for each successive compression operation.
+ *  This will make workload friendlier for system's memory.
+ *  Use one context per thread for parallel execution. */
+typedef struct ZSTD_DCtx_s ZSTD_DCtx;
+ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void);
+ZSTDLIB_API size_t     ZSTD_freeDCtx(ZSTD_DCtx* dctx);  /* accept NULL pointer */
+
+/*! ZSTD_decompressDCtx() :
+ *  Same as ZSTD_decompress(),
+ *  requires an allocated ZSTD_DCtx.
+ *  Compatible with sticky parameters.
+ */
+ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx,
+                                       void* dst, size_t dstCapacity,
+                                 const void* src, size_t srcSize);
+
+
+/* *************************************
+*  Advanced compression API
+***************************************/
+
+/* API design :
+ *   Parameters are pushed one by one into an existing context,
+ *   using ZSTD_CCtx_set*() functions.
+ *   Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame.
+ *   "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` !
+ *   __They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()__ .
+ *
+ *   It's possible to reset all parameters to "default" using ZSTD_CCtx_reset().
+ *
+ *   This API supercedes all other "advanced" API entry points in the experimental section.
+ *   In the future, we expect to remove from experimental API entry points which are redundant with this API.
+ */
+
+
+/* Compression strategies, listed from fastest to strongest */
+typedef enum { ZSTD_fast=1,
+               ZSTD_dfast=2,
+               ZSTD_greedy=3,
+               ZSTD_lazy=4,
+               ZSTD_lazy2=5,
+               ZSTD_btlazy2=6,
+               ZSTD_btopt=7,
+               ZSTD_btultra=8,
+               ZSTD_btultra2=9
+               /* note : new strategies _might_ be added in the future.
+                         Only the order (from fast to strong) is guaranteed */
+} ZSTD_strategy;
+
+
+typedef enum {
+
+    /* compression parameters
+     * Note: When compressing with a ZSTD_CDict these parameters are superseded
+     * by the parameters used to construct the ZSTD_CDict.
+     * See ZSTD_CCtx_refCDict() for more info (superseded-by-cdict). */
+    ZSTD_c_compressionLevel=100, /* Set compression parameters according to pre-defined cLevel table.
+                              * Note that exact compression parameters are dynamically determined,
+                              * depending on both compression level and srcSize (when known).
+                              * Default level is ZSTD_CLEVEL_DEFAULT==3.
+                              * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT.
+                              * Note 1 : it's possible to pass a negative compression level.
+                              * Note 2 : setting a level does not automatically set all other compression parameters
+                              *   to default. Setting this will however eventually dynamically impact the compression
+                              *   parameters which have not been manually set. The manually set
+                              *   ones will 'stick'. */
+    /* Advanced compression parameters :
+     * It's possible to pin down compression parameters to some specific values.
+     * In which case, these values are no longer dynamically selected by the compressor */
+    ZSTD_c_windowLog=101,    /* Maximum allowed back-reference distance, expressed as power of 2.
+                              * This will set a memory budget for streaming decompression,
+                              * with larger values requiring more memory
+                              * and typically compressing more.
+                              * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX.
+                              * Special: value 0 means "use default windowLog".
+                              * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT
+                              *       requires explicitly allowing such size at streaming decompression stage. */
+    ZSTD_c_hashLog=102,      /* Size of the initial probe table, as a power of 2.
+                              * Resulting memory usage is (1 << (hashLog+2)).
+                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX.
+                              * Larger tables improve compression ratio of strategies <= dFast,
+                              * and improve speed of strategies > dFast.
+                              * Special: value 0 means "use default hashLog". */
+    ZSTD_c_chainLog=103,     /* Size of the multi-probe search table, as a power of 2.
+                              * Resulting memory usage is (1 << (chainLog+2)).
+                              * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX.
+                              * Larger tables result in better and slower compression.
+                              * This parameter is useless for "fast" strategy.
+                              * It's still useful when using "dfast" strategy,
+                              * in which case it defines a secondary probe table.
+                              * Special: value 0 means "use default chainLog". */
+    ZSTD_c_searchLog=104,    /* Number of search attempts, as a power of 2.
+                              * More attempts result in better and slower compression.
+                              * This parameter is useless for "fast" and "dFast" strategies.
+                              * Special: value 0 means "use default searchLog". */
+    ZSTD_c_minMatch=105,     /* Minimum size of searched matches.
+                              * Note that Zstandard can still find matches of smaller size,
+                              * it just tweaks its search algorithm to look for this size and larger.
+                              * Larger values increase compression and decompression speed, but decrease ratio.
+                              * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX.
+                              * Note that currently, for all strategies < btopt, effective minimum is 4.
+                              *                    , for all strategies > fast, effective maximum is 6.
+                              * Special: value 0 means "use default minMatchLength". */
+    ZSTD_c_targetLength=106, /* Impact of this field depends on strategy.
+                              * For strategies btopt, btultra & btultra2:
+                              *     Length of Match considered "good enough" to stop search.
+                              *     Larger values make compression stronger, and slower.
+                              * For strategy fast:
+                              *     Distance between match sampling.
+                              *     Larger values make compression faster, and weaker.
+                              * Special: value 0 means "use default targetLength". */
+    ZSTD_c_strategy=107,     /* See ZSTD_strategy enum definition.
+                              * The higher the value of selected strategy, the more complex it is,
+                              * resulting in stronger and slower compression.
+                              * Special: value 0 means "use default strategy". */
+
+    /* LDM mode parameters */
+    ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching.
+                                     * This parameter is designed to improve compression ratio
+                                     * for large inputs, by finding large matches at long distance.
+                                     * It increases memory usage and window size.
+                                     * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB
+                                     * except when expressly set to a different value.
+                                     * Note: will be enabled by default if ZSTD_c_windowLog >= 128 MB and
+                                     * compression strategy >= ZSTD_btopt (== compression level 16+) */
+    ZSTD_c_ldmHashLog=161,   /* Size of the table for long distance matching, as a power of 2.
+                              * Larger values increase memory usage and compression ratio,
+                              * but decrease compression speed.
+                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX
+                              * default: windowlog - 7.
+                              * Special: value 0 means "automatically determine hashlog". */
+    ZSTD_c_ldmMinMatch=162,  /* Minimum match size for long distance matcher.
+                              * Larger/too small values usually decrease compression ratio.
+                              * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX.
+                              * Special: value 0 means "use default value" (default: 64). */
+    ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution.
+                              * Larger values improve collision resolution but decrease compression speed.
+                              * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX.
+                              * Special: value 0 means "use default value" (default: 3). */
+    ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table.
+                              * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN).
+                              * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage.
+                              * Larger values improve compression speed.
+                              * Deviating far from default value will likely result in a compression ratio decrease.
+                              * Special: value 0 means "automatically determine hashRateLog". */
+
+    /* frame parameters */
+    ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1)
+                              * Content size must be known at the beginning of compression.
+                              * This is automatically the case when using ZSTD_compress2(),
+                              * For streaming scenarios, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */
+    ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */
+    ZSTD_c_dictIDFlag=202,   /* When applicable, dictionary's ID is written into frame header (default:1) */
+
+    /* multi-threading parameters */
+    /* These parameters are only active if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD).
+     * Otherwise, trying to set any other value than default (0) will be a no-op and return an error.
+     * In a situation where it's unknown if the linked library supports multi-threading or not,
+     * setting ZSTD_c_nbWorkers to any value >= 1 and consulting the return value provides a quick way to check this property.
+     */
+    ZSTD_c_nbWorkers=400,    /* Select how many threads will be spawned to compress in parallel.
+                              * When nbWorkers >= 1, triggers asynchronous mode when invoking ZSTD_compressStream*() :
+                              * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller,
+                              * while compression is performed in parallel, within worker thread(s).
+                              * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end :
+                              *  in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call).
+                              * More workers improve speed, but also increase memory usage.
+                              * Default value is `0`, aka "single-threaded mode" : no worker is spawned,
+                              * compression is performed inside Caller's thread, and all invocations are blocking */
+    ZSTD_c_jobSize=401,      /* Size of a compression job. This value is enforced only when nbWorkers >= 1.
+                              * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads.
+                              * 0 means default, which is dynamically determined based on compression parameters.
+                              * Job size must be a minimum of overlap size, or 1 MB, whichever is largest.
+                              * The minimum size is automatically and transparently enforced. */
+    ZSTD_c_overlapLog=402,   /* Control the overlap size, as a fraction of window size.
+                              * The overlap size is an amount of data reloaded from previous job at the beginning of a new job.
+                              * It helps preserve compression ratio, while each job is compressed in parallel.
+                              * This value is enforced only when nbWorkers >= 1.
+                              * Larger values increase compression ratio, but decrease speed.
+                              * Possible values range from 0 to 9 :
+                              * - 0 means "default" : value will be determined by the library, depending on strategy
+                              * - 1 means "no overlap"
+                              * - 9 means "full overlap", using a full window size.
+                              * Each intermediate rank increases/decreases load size by a factor 2 :
+                              * 9: full window;  8: w/2;  7: w/4;  6: w/8;  5:w/16;  4: w/32;  3:w/64;  2:w/128;  1:no overlap;  0:default
+                              * default value varies between 6 and 9, depending on strategy */
+
+    /* note : additional experimental parameters are also available
+     * within the experimental section of the API.
+     * At the time of this writing, they include :
+     * ZSTD_c_rsyncable
+     * ZSTD_c_format
+     * ZSTD_c_forceMaxWindow
+     * ZSTD_c_forceAttachDict
+     * ZSTD_c_literalCompressionMode
+     * ZSTD_c_targetCBlockSize
+     * ZSTD_c_srcSizeHint
+     * ZSTD_c_enableDedicatedDictSearch
+     * ZSTD_c_stableInBuffer
+     * ZSTD_c_stableOutBuffer
+     * ZSTD_c_blockDelimiters
+     * ZSTD_c_validateSequences
+     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+     * note : never ever use experimentalParam? names directly;
+     *        also, the enums values themselves are unstable and can still change.
+     */
+     ZSTD_c_experimentalParam1=500,
+     ZSTD_c_experimentalParam2=10,
+     ZSTD_c_experimentalParam3=1000,
+     ZSTD_c_experimentalParam4=1001,
+     ZSTD_c_experimentalParam5=1002,
+     ZSTD_c_experimentalParam6=1003,
+     ZSTD_c_experimentalParam7=1004,
+     ZSTD_c_experimentalParam8=1005,
+     ZSTD_c_experimentalParam9=1006,
+     ZSTD_c_experimentalParam10=1007,
+     ZSTD_c_experimentalParam11=1008,
+     ZSTD_c_experimentalParam12=1009
+} ZSTD_cParameter;
+
+typedef struct {
+    size_t error;
+    int lowerBound;
+    int upperBound;
+} ZSTD_bounds;
+
+/*! ZSTD_cParam_getBounds() :
+ *  All parameters must belong to an interval with lower and upper bounds,
+ *  otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ *         - an error status field, which must be tested using ZSTD_isError()
+ *         - lower and upper bounds, both inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam);
+
+/*! ZSTD_CCtx_setParameter() :
+ *  Set one compression parameter, selected by enum ZSTD_cParameter.
+ *  All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds().
+ *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ *  Setting a parameter is generally only possible during frame initialization (before starting compression).
+ *  Exception : when using multi-threading mode (nbWorkers >= 1),
+ *              the following parameters can be updated _during_ compression (within same frame):
+ *              => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy.
+ *              new parameters will be active for next job only (after a flush()).
+ * @return : an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value);
+
+/*! ZSTD_CCtx_setPledgedSrcSize() :
+ *  Total input data size to be compressed as a single frame.
+ *  Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag.
+ *  This value will also be controlled at end of frame, and trigger an error if not respected.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame.
+ *           In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN.
+ *           ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame.
+ *  Note 2 : pledgedSrcSize is only valid once, for the next frame.
+ *           It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN.
+ *  Note 3 : Whenever all input data is provided and consumed in a single round,
+ *           for example with ZSTD_compress2(),
+ *           or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end),
+ *           this value is automatically overridden by srcSize instead.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize);
+
+typedef enum {
+    ZSTD_reset_session_only = 1,
+    ZSTD_reset_parameters = 2,
+    ZSTD_reset_session_and_parameters = 3
+} ZSTD_ResetDirective;
+
+/*! ZSTD_CCtx_reset() :
+ *  There are 2 different things that can be reset, independently or jointly :
+ *  - The session : will stop compressing current frame, and make CCtx ready to start a new one.
+ *                  Useful after an error, or to interrupt any ongoing compression.
+ *                  Any internal data not yet flushed is cancelled.
+ *                  Compression parameters and dictionary remain unchanged.
+ *                  They will be used to compress next frame.
+ *                  Resetting session never fails.
+ *  - The parameters : changes all parameters back to "default".
+ *                  This removes any reference to any dictionary too.
+ *                  Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing)
+ *                  otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError())
+ *  - Both : similar to resetting the session, followed by resetting parameters.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset);
+
+/*! ZSTD_compress2() :
+ *  Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API.
+ *  ZSTD_compress2() always starts a new frame.
+ *  Should cctx hold data from a previously unfinished frame, everything about it is forgotten.
+ *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ *  - The function is always blocking, returns when compression is completed.
+ *  Hint : compression runs faster if `dstCapacity` >=  `ZSTD_compressBound(srcSize)`.
+ * @return : compressed size written into `dst` (<= `dstCapacity),
+ *           or an error code if it fails (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx,
+                                   void* dst, size_t dstCapacity,
+                             const void* src, size_t srcSize);
+
+
+/* *************************************
+*  Advanced decompression API
+***************************************/
+
+/* The advanced API pushes parameters one by one into an existing DCtx context.
+ * Parameters are sticky, and remain valid for all following frames
+ * using the same DCtx context.
+ * It's possible to reset parameters to default values using ZSTD_DCtx_reset().
+ * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream().
+ *        Therefore, no new decompression function is necessary.
+ */
+
+typedef enum {
+
+    ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which
+                              * the streaming API will refuse to allocate memory buffer
+                              * in order to protect the host from unreasonable memory requirements.
+                              * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
+                              * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT).
+                              * Special: value 0 means "use default maximum windowLog". */
+
+    /* note : additional experimental parameters are also available
+     * within the experimental section of the API.
+     * At the time of this writing, they include :
+     * ZSTD_d_format
+     * ZSTD_d_stableOutBuffer
+     * ZSTD_d_forceIgnoreChecksum
+     * ZSTD_d_refMultipleDDicts
+     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+     * note : never ever use experimentalParam? names directly
+     */
+     ZSTD_d_experimentalParam1=1000,
+     ZSTD_d_experimentalParam2=1001,
+     ZSTD_d_experimentalParam3=1002,
+     ZSTD_d_experimentalParam4=1003
+
+} ZSTD_dParameter;
+
+/*! ZSTD_dParam_getBounds() :
+ *  All parameters must belong to an interval with lower and upper bounds,
+ *  otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ *         - an error status field, which must be tested using ZSTD_isError()
+ *         - both lower and upper bounds, inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam);
+
+/*! ZSTD_DCtx_setParameter() :
+ *  Set one compression parameter, selected by enum ZSTD_dParameter.
+ *  All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds().
+ *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ *  Setting a parameter is only possible during frame initialization (before starting decompression).
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value);
+
+/*! ZSTD_DCtx_reset() :
+ *  Return a DCtx to clean state.
+ *  Session and parameters can be reset jointly or separately.
+ *  Parameters can only be reset when no active frame is being decompressed.
+ * @return : 0, or an error code, which can be tested with ZSTD_isError()
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset);
+
+
+/* **************************
+*  Streaming
+****************************/
+
+typedef struct ZSTD_inBuffer_s {
+  const void* src;    /*< start of input buffer */
+  size_t size;        /*< size of input buffer */
+  size_t pos;         /*< position where reading stopped. Will be updated. Necessarily 0 <= pos <= size */
+} ZSTD_inBuffer;
+
+typedef struct ZSTD_outBuffer_s {
+  void*  dst;         /*< start of output buffer */
+  size_t size;        /*< size of output buffer */
+  size_t pos;         /*< position where writing stopped. Will be updated. Necessarily 0 <= pos <= size */
+} ZSTD_outBuffer;
+
+
+
+/*-***********************************************************************
+*  Streaming compression - HowTo
+*
+*  A ZSTD_CStream object is required to track streaming operation.
+*  Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources.
+*  ZSTD_CStream objects can be reused multiple times on consecutive compression operations.
+*  It is recommended to re-use ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory.
+*
+*  For parallel execution, use one separate ZSTD_CStream per thread.
+*
+*  note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing.
+*
+*  Parameters are sticky : when starting a new compression on the same context,
+*  it will re-use the same sticky parameters as previous compression session.
+*  When in doubt, it's recommended to fully initialize the context before usage.
+*  Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(),
+*  ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to
+*  set more specific parameters, the pledged source size, or load a dictionary.
+*
+*  Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to
+*  consume input stream. The function will automatically update both `pos`
+*  fields within `input` and `output`.
+*  Note that the function may not consume the entire input, for example, because
+*  the output buffer is already full, in which case `input.pos < input.size`.
+*  The caller must check if input has been entirely consumed.
+*  If not, the caller must make some room to receive more compressed data,
+*  and then present again remaining input data.
+*  note: ZSTD_e_continue is guaranteed to make some forward progress when called,
+*        but doesn't guarantee maximal forward progress. This is especially relevant
+*        when compressing with multiple threads. The call won't block if it can
+*        consume some input, but if it can't it will wait for some, but not all,
+*        output to be flushed.
+* @return : provides a minimum amount of data remaining to be flushed from internal buffers
+*           or an error code, which can be tested using ZSTD_isError().
+*
+*  At any moment, it's possible to flush whatever data might remain stuck within internal buffer,
+*  using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated.
+*  Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0).
+*  In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush.
+*  You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the
+*  operation.
+*  note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will
+*        block until the flush is complete or the output buffer is full.
+*  @return : 0 if internal buffers are entirely flushed,
+*            >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
+*            or an error code, which can be tested using ZSTD_isError().
+*
+*  Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame.
+*  It will perform a flush and write frame epilogue.
+*  The epilogue is required for decoders to consider a frame completed.
+*  flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush.
+*  You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to
+*  start a new frame.
+*  note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will
+*        block until the flush is complete or the output buffer is full.
+*  @return : 0 if frame fully completed and fully flushed,
+*            >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
+*            or an error code, which can be tested using ZSTD_isError().
+*
+* *******************************************************************/
+
+typedef ZSTD_CCtx ZSTD_CStream;  /*< CCtx and CStream are now effectively same object (>= v1.3.0) */
+                                 /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */
+/*===== ZSTD_CStream management functions =====*/
+ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void);
+ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs);  /* accept NULL pointer */
+
+/*===== Streaming compression functions =====*/
+typedef enum {
+    ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */
+    ZSTD_e_flush=1,    /* flush any data provided so far,
+                        * it creates (at least) one new block, that can be decoded immediately on reception;
+                        * frame will continue: any future data can still reference previously compressed data, improving compression.
+                        * note : multithreaded compression will block to flush as much output as possible. */
+    ZSTD_e_end=2       /* flush any remaining data _and_ close current frame.
+                        * note that frame is only closed after compressed data is fully flushed (return value == 0).
+                        * After that point, any additional data starts a new frame.
+                        * note : each frame is independent (does not reference any content from previous frame).
+                        : note : multithreaded compression will block to flush as much output as possible. */
+} ZSTD_EndDirective;
+
+/*! ZSTD_compressStream2() :
+ *  Behaves about the same as ZSTD_compressStream, with additional control on end directive.
+ *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ *  - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode)
+ *  - output->pos must be <= dstCapacity, input->pos must be <= srcSize
+ *  - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
+ *  - endOp must be a valid directive
+ *  - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller.
+ *  - When nbWorkers>=1, function is non-blocking : it copies a portion of input, distributes jobs to internal worker threads, flush to output whatever is available,
+ *                                                  and then immediately returns, just indicating that there is some data remaining to be flushed.
+ *                                                  The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte.
+ *  - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking.
+ *  - @return provides a minimum amount of data remaining to be flushed from internal buffers
+ *            or an error code, which can be tested using ZSTD_isError().
+ *            if @return != 0, flush is not fully completed, there is still some data left within internal buffers.
+ *            This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers.
+ *            For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed.
+ *  - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0),
+ *            only ZSTD_e_end or ZSTD_e_flush operations are allowed.
+ *            Before starting a new compression job, or changing compression parameters,
+ *            it is required to fully flush internal buffers.
+ */
+ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx,
+                                         ZSTD_outBuffer* output,
+                                         ZSTD_inBuffer* input,
+                                         ZSTD_EndDirective endOp);
+
+
+/* These buffer sizes are softly recommended.
+ * They are not required : ZSTD_compressStream*() happily accepts any buffer size, for both input and output.
+ * Respecting the recommended size just makes it a bit easier for ZSTD_compressStream*(),
+ * reducing the amount of memory shuffling and buffering, resulting in minor performance savings.
+ *
+ * However, note that these recommendations are from the perspective of a C caller program.
+ * If the streaming interface is invoked from some other language,
+ * especially managed ones such as Java or Go, through a foreign function interface such as jni or cgo,
+ * a major performance rule is to reduce crossing such interface to an absolute minimum.
+ * It's not rare that performance ends being spent more into the interface, rather than compression itself.
+ * In which cases, prefer using large buffers, as large as practical,
+ * for both input and output, to reduce the nb of roundtrips.
+ */
+ZSTDLIB_API size_t ZSTD_CStreamInSize(void);    /*< recommended size for input buffer */
+ZSTDLIB_API size_t ZSTD_CStreamOutSize(void);   /*< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block. */
+
+
+/* *****************************************************************************
+ * This following is a legacy streaming API.
+ * It can be replaced by ZSTD_CCtx_reset() and ZSTD_compressStream2().
+ * It is redundant, but remains fully supported.
+ * Advanced parameters and dictionary compression can only be used through the
+ * new API.
+ ******************************************************************************/
+
+/*!
+ * Equivalent to:
+ *
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any)
+ *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ */
+ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel);
+/*!
+ * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue).
+ * NOTE: The return value is different. ZSTD_compressStream() returns a hint for
+ * the next read size (if non-zero and not an error). ZSTD_compressStream2()
+ * returns the minimum nb of bytes left to flush (if non-zero and not an error).
+ */
+ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
+/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */
+ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */
+ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+
+
+/*-***************************************************************************
+*  Streaming decompression - HowTo
+*
+*  A ZSTD_DStream object is required to track streaming operations.
+*  Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources.
+*  ZSTD_DStream objects can be re-used multiple times.
+*
+*  Use ZSTD_initDStream() to start a new decompression operation.
+* @return : recommended first input size
+*  Alternatively, use advanced API to set specific properties.
+*
+*  Use ZSTD_decompressStream() repetitively to consume your input.
+*  The function will update both `pos` fields.
+*  If `input.pos < input.size`, some input has not been consumed.
+*  It's up to the caller to present again remaining data.
+*  The function tries to flush all data decoded immediately, respecting output buffer size.
+*  If `output.pos < output.size`, decoder has flushed everything it could.
+*  But if `output.pos == output.size`, there might be some data left within internal buffers.,
+*  In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer.
+*  Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX.
+* @return : 0 when a frame is completely decoded and fully flushed,
+*        or an error code, which can be tested using ZSTD_isError(),
+*        or any other value > 0, which means there is still some decoding or flushing to do to complete current frame :
+*                                the return value is a suggested next input size (just a hint for better latency)
+*                                that will never request more than the remaining frame size.
+* *******************************************************************************/
+
+typedef ZSTD_DCtx ZSTD_DStream;  /*< DCtx and DStream are now effectively same object (>= v1.3.0) */
+                                 /* For compatibility with versions <= v1.2.0, prefer differentiating them. */
+/*===== ZSTD_DStream management functions =====*/
+ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void);
+ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds);  /* accept NULL pointer */
+
+/*===== Streaming decompression functions =====*/
+
+/* This function is redundant with the advanced API and equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *     ZSTD_DCtx_refDDict(zds, NULL);
+ */
+ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds);
+
+ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
+
+ZSTDLIB_API size_t ZSTD_DStreamInSize(void);    /*!< recommended size for input buffer */
+ZSTDLIB_API size_t ZSTD_DStreamOutSize(void);   /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */
+
+
+/* ************************
+*  Simple dictionary API
+***************************/
+/*! ZSTD_compress_usingDict() :
+ *  Compression at an explicit compression level using a Dictionary.
+ *  A dictionary can be any arbitrary data segment (also called a prefix),
+ *  or a buffer with specified information (see dictBuilder/zdict.h).
+ *  Note : This function loads the dictionary, resulting in significant startup delay.
+ *         It's intended for a dictionary used only once.
+ *  Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx,
+                                           void* dst, size_t dstCapacity,
+                                     const void* src, size_t srcSize,
+                                     const void* dict,size_t dictSize,
+                                           int compressionLevel);
+
+/*! ZSTD_decompress_usingDict() :
+ *  Decompression using a known Dictionary.
+ *  Dictionary must be identical to the one used during compression.
+ *  Note : This function loads the dictionary, resulting in significant startup delay.
+ *         It's intended for a dictionary used only once.
+ *  Note : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx,
+                                             void* dst, size_t dstCapacity,
+                                       const void* src, size_t srcSize,
+                                       const void* dict,size_t dictSize);
+
+
+/* *********************************
+ *  Bulk processing dictionary API
+ **********************************/
+typedef struct ZSTD_CDict_s ZSTD_CDict;
+
+/*! ZSTD_createCDict() :
+ *  When compressing multiple messages or blocks using the same dictionary,
+ *  it's recommended to digest the dictionary only once, since it's a costly operation.
+ *  ZSTD_createCDict() will create a state from digesting a dictionary.
+ *  The resulting state can be used for future compression operations with very limited startup cost.
+ *  ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only.
+ * @dictBuffer can be released after ZSTD_CDict creation, because its content is copied within CDict.
+ *  Note 1 : Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate @dictBuffer content.
+ *  Note 2 : A ZSTD_CDict can be created from an empty @dictBuffer,
+ *      in which case the only thing that it transports is the @compressionLevel.
+ *      This can be useful in a pipeline featuring ZSTD_compress_usingCDict() exclusively,
+ *      expecting a ZSTD_CDict parameter with any data, including those without a known dictionary. */
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize,
+                                         int compressionLevel);
+
+/*! ZSTD_freeCDict() :
+ *  Function frees memory allocated by ZSTD_createCDict().
+ *  If a NULL pointer is passed, no operation is performed. */
+ZSTDLIB_API size_t      ZSTD_freeCDict(ZSTD_CDict* CDict);
+
+/*! ZSTD_compress_usingCDict() :
+ *  Compression using a digested Dictionary.
+ *  Recommended when same dictionary is used multiple times.
+ *  Note : compression level is _decided at dictionary creation time_,
+ *     and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */
+ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx,
+                                            void* dst, size_t dstCapacity,
+                                      const void* src, size_t srcSize,
+                                      const ZSTD_CDict* cdict);
+
+
+typedef struct ZSTD_DDict_s ZSTD_DDict;
+
+/*! ZSTD_createDDict() :
+ *  Create a digested dictionary, ready to start decompression operation without startup delay.
+ *  dictBuffer can be released after DDict creation, as its content is copied inside DDict. */
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize);
+
+/*! ZSTD_freeDDict() :
+ *  Function frees memory allocated with ZSTD_createDDict()
+ *  If a NULL pointer is passed, no operation is performed. */
+ZSTDLIB_API size_t      ZSTD_freeDDict(ZSTD_DDict* ddict);
+
+/*! ZSTD_decompress_usingDDict() :
+ *  Decompression using a digested Dictionary.
+ *  Recommended when same dictionary is used multiple times. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx,
+                                              void* dst, size_t dstCapacity,
+                                        const void* src, size_t srcSize,
+                                        const ZSTD_DDict* ddict);
+
+
+/* ******************************
+ *  Dictionary helper functions
+ *******************************/
+
+/*! ZSTD_getDictID_fromDict() :
+ *  Provides the dictID stored within dictionary.
+ *  if @return == 0, the dictionary is not conformant with Zstandard specification.
+ *  It can still be loaded, but as a content-only dictionary. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize);
+
+/*! ZSTD_getDictID_fromDDict() :
+ *  Provides the dictID of the dictionary loaded into `ddict`.
+ *  If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
+ *  Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict);
+
+/*! ZSTD_getDictID_fromFrame() :
+ *  Provides the dictID required to decompressed the frame stored within `src`.
+ *  If @return == 0, the dictID could not be decoded.
+ *  This could for one of the following reasons :
+ *  - The frame does not require a dictionary to be decoded (most common case).
+ *  - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information.
+ *    Note : this use case also happens when using a non-conformant dictionary.
+ *  - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`).
+ *  - This is not a Zstandard frame.
+ *  When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
+
+
+/* *****************************************************************************
+ * Advanced dictionary and prefix API
+ *
+ * This API allows dictionaries to be used with ZSTD_compress2(),
+ * ZSTD_compressStream2(), and ZSTD_decompress(). Dictionaries are sticky, and
+ * only reset with the context is reset with ZSTD_reset_parameters or
+ * ZSTD_reset_session_and_parameters. Prefixes are single-use.
+ ******************************************************************************/
+
+
+/*! ZSTD_CCtx_loadDictionary() :
+ *  Create an internal CDict from `dict` buffer.
+ *  Decompression will have to use same dictionary.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary,
+ *           meaning "return to no-dictionary mode".
+ *  Note 1 : Dictionary is sticky, it will be used for all future compressed frames.
+ *           To return to "no-dictionary" situation, load a NULL dictionary (or reset parameters).
+ *  Note 2 : Loading a dictionary involves building tables.
+ *           It's also a CPU consuming operation, with non-negligible impact on latency.
+ *           Tables are dependent on compression parameters, and for this reason,
+ *           compression parameters can no longer be changed after loading a dictionary.
+ *  Note 3 :`dict` content will be copied internally.
+ *           Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead.
+ *           In such a case, dictionary buffer must outlive its users.
+ *  Note 4 : Use ZSTD_CCtx_loadDictionary_advanced()
+ *           to precisely select how dictionary content must be interpreted. */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_CCtx_refCDict() :
+ *  Reference a prepared dictionary, to be used for all next compressed frames.
+ *  Note that compression parameters are enforced from within CDict,
+ *  and supersede any compression parameter previously set within CCtx.
+ *  The parameters ignored are labelled as "superseded-by-cdict" in the ZSTD_cParameter enum docs.
+ *  The ignored parameters will be used again if the CCtx is returned to no-dictionary mode.
+ *  The dictionary will remain valid for future compressed frames using same CCtx.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special : Referencing a NULL CDict means "return to no-dictionary mode".
+ *  Note 1 : Currently, only one dictionary can be managed.
+ *           Referencing a new dictionary effectively "discards" any previous one.
+ *  Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */
+ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict);
+
+/*! ZSTD_CCtx_refPrefix() :
+ *  Reference a prefix (single-usage dictionary) for next compressed frame.
+ *  A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end).
+ *  Decompression will need same prefix to properly regenerate data.
+ *  Compressing with a prefix is similar in outcome as performing a diff and compressing it,
+ *  but performs much faster, especially during decompression (compression speed is tunable with compression level).
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary
+ *  Note 1 : Prefix buffer is referenced. It **must** outlive compression.
+ *           Its content must remain unmodified during compression.
+ *  Note 2 : If the intention is to diff some large src data blob with some prior version of itself,
+ *           ensure that the window size is large enough to contain the entire source.
+ *           See ZSTD_c_windowLog.
+ *  Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters.
+ *           It's a CPU consuming operation, with non-negligible impact on latency.
+ *           If there is a need to use the same prefix multiple times, consider loadDictionary instead.
+ *  Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dct_rawContent).
+ *           Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */
+ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx,
+                                 const void* prefix, size_t prefixSize);
+
+/*! ZSTD_DCtx_loadDictionary() :
+ *  Create an internal DDict from dict buffer,
+ *  to be used to decompress next frames.
+ *  The dictionary remains valid for all future frames, until explicitly invalidated.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary,
+ *            meaning "return to no-dictionary mode".
+ *  Note 1 : Loading a dictionary involves building tables,
+ *           which has a non-negligible impact on CPU usage and latency.
+ *           It's recommended to "load once, use many times", to amortize the cost
+ *  Note 2 :`dict` content will be copied internally, so `dict` can be released after loading.
+ *           Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead.
+ *  Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of
+ *           how dictionary content is loaded and interpreted.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_DCtx_refDDict() :
+ *  Reference a prepared dictionary, to be used to decompress next frames.
+ *  The dictionary remains active for decompression of future frames using same DCtx.
+ *
+ *  If called with ZSTD_d_refMultipleDDicts enabled, repeated calls of this function
+ *  will store the DDict references in a table, and the DDict used for decompression
+ *  will be determined at decompression time, as per the dict ID in the frame.
+ *  The memory for the table is allocated on the first call to refDDict, and can be
+ *  freed with ZSTD_freeDCtx().
+ *
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : Currently, only one dictionary can be managed.
+ *           Referencing a new dictionary effectively "discards" any previous one.
+ *  Special: referencing a NULL DDict means "return to no-dictionary mode".
+ *  Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
+
+/*! ZSTD_DCtx_refPrefix() :
+ *  Reference a prefix (single-usage dictionary) to decompress next frame.
+ *  This is the reverse operation of ZSTD_CCtx_refPrefix(),
+ *  and must use the same prefix as the one used during compression.
+ *  Prefix is **only used once**. Reference is discarded at end of frame.
+ *  End of frame is reached when ZSTD_decompressStream() returns 0.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary
+ *  Note 2 : Prefix buffer is referenced. It **must** outlive decompression.
+ *           Prefix buffer must remain unmodified up to the end of frame,
+ *           reached when ZSTD_decompressStream() returns 0.
+ *  Note 3 : By default, the prefix is treated as raw content (ZSTD_dct_rawContent).
+ *           Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section)
+ *  Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost.
+ *           A full dictionary is more costly, as it requires building tables.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx,
+                                 const void* prefix, size_t prefixSize);
+
+/* ===   Memory management   === */
+
+/*! ZSTD_sizeof_*() :
+ *  These functions give the _current_ memory usage of selected object.
+ *  Note that object memory usage can evolve (increase or decrease) over time. */
+ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx);
+ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs);
+ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds);
+ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict);
+ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
+
+#endif  /* ZSTD_H_235446 */
+
+
+/* **************************************************************************************
+ *   ADVANCED AND EXPERIMENTAL FUNCTIONS
+ ****************************************************************************************
+ * The definitions in the following section are considered experimental.
+ * They are provided for advanced scenarios.
+ * They should never be used with a dynamic library, as prototypes may change in the future.
+ * Use them only in association with static linking.
+ * ***************************************************************************************/
+
+#if !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY)
+#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY
+
+/* **************************************************************************************
+ *   experimental API (static linking only)
+ ****************************************************************************************
+ * The following symbols and constants
+ * are not planned to join "stable API" status in the near future.
+ * They can still change in future versions.
+ * Some of them are planned to remain in the static_only section indefinitely.
+ * Some of them might be removed in the future (especially when redundant with existing stable functions)
+ * ***************************************************************************************/
+
+#define ZSTD_FRAMEHEADERSIZE_PREFIX(format) ((format) == ZSTD_f_zstd1 ? 5 : 1)   /* minimum input size required to query frame header size */
+#define ZSTD_FRAMEHEADERSIZE_MIN(format)    ((format) == ZSTD_f_zstd1 ? 6 : 2)
+#define ZSTD_FRAMEHEADERSIZE_MAX   18   /* can be useful for static allocation */
+#define ZSTD_SKIPPABLEHEADERSIZE    8
+
+/* compression parameter bounds */
+#define ZSTD_WINDOWLOG_MAX_32    30
+#define ZSTD_WINDOWLOG_MAX_64    31
+#define ZSTD_WINDOWLOG_MAX     ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64))
+#define ZSTD_WINDOWLOG_MIN       10
+#define ZSTD_HASHLOG_MAX       ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30)
+#define ZSTD_HASHLOG_MIN          6
+#define ZSTD_CHAINLOG_MAX_32     29
+#define ZSTD_CHAINLOG_MAX_64     30
+#define ZSTD_CHAINLOG_MAX      ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64))
+#define ZSTD_CHAINLOG_MIN        ZSTD_HASHLOG_MIN
+#define ZSTD_SEARCHLOG_MAX      (ZSTD_WINDOWLOG_MAX-1)
+#define ZSTD_SEARCHLOG_MIN        1
+#define ZSTD_MINMATCH_MAX         7   /* only for ZSTD_fast, other strategies are limited to 6 */
+#define ZSTD_MINMATCH_MIN         3   /* only for ZSTD_btopt+, faster strategies are limited to 4 */
+#define ZSTD_TARGETLENGTH_MAX    ZSTD_BLOCKSIZE_MAX
+#define ZSTD_TARGETLENGTH_MIN     0   /* note : comparing this constant to an unsigned results in a tautological test */
+#define ZSTD_STRATEGY_MIN        ZSTD_fast
+#define ZSTD_STRATEGY_MAX        ZSTD_btultra2
+
+
+#define ZSTD_OVERLAPLOG_MIN       0
+#define ZSTD_OVERLAPLOG_MAX       9
+
+#define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27   /* by default, the streaming decoder will refuse any frame
+                                           * requiring larger than (1<<ZSTD_WINDOWLOG_LIMIT_DEFAULT) window size,
+                                           * to preserve host's memory from unreasonable requirements.
+                                           * This limit can be overridden using ZSTD_DCtx_setParameter(,ZSTD_d_windowLogMax,).
+                                           * The limit does not apply for one-pass decoders (such as ZSTD_decompress()), since no additional memory is allocated */
+
+
+/* LDM parameter bounds */
+#define ZSTD_LDM_HASHLOG_MIN      ZSTD_HASHLOG_MIN
+#define ZSTD_LDM_HASHLOG_MAX      ZSTD_HASHLOG_MAX
+#define ZSTD_LDM_MINMATCH_MIN        4
+#define ZSTD_LDM_MINMATCH_MAX     4096
+#define ZSTD_LDM_BUCKETSIZELOG_MIN   1
+#define ZSTD_LDM_BUCKETSIZELOG_MAX   8
+#define ZSTD_LDM_HASHRATELOG_MIN     0
+#define ZSTD_LDM_HASHRATELOG_MAX (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN)
+
+/* Advanced parameter bounds */
+#define ZSTD_TARGETCBLOCKSIZE_MIN   64
+#define ZSTD_TARGETCBLOCKSIZE_MAX   ZSTD_BLOCKSIZE_MAX
+#define ZSTD_SRCSIZEHINT_MIN        0
+#define ZSTD_SRCSIZEHINT_MAX        INT_MAX
+
+/* internal */
+#define ZSTD_HASHLOG3_MAX           17
+
+
+/* ---  Advanced types  --- */
+
+typedef struct ZSTD_CCtx_params_s ZSTD_CCtx_params;
+
+typedef struct {
+    unsigned int offset;      /* The offset of the match. (NOT the same as the offset code)
+                               * If offset == 0 and matchLength == 0, this sequence represents the last
+                               * literals in the block of litLength size.
+                               */
+
+    unsigned int litLength;   /* Literal length of the sequence. */
+    unsigned int matchLength; /* Match length of the sequence. */
+
+                              /* Note: Users of this API may provide a sequence with matchLength == litLength == offset == 0.
+                               * In this case, we will treat the sequence as a marker for a block boundary.
+                               */
+
+    unsigned int rep;         /* Represents which repeat offset is represented by the field 'offset'.
+                               * Ranges from [0, 3].
+                               *
+                               * Repeat offsets are essentially previous offsets from previous sequences sorted in
+                               * recency order. For more detail, see doc/zstd_compression_format.md
+                               *
+                               * If rep == 0, then 'offset' does not contain a repeat offset.
+                               * If rep > 0:
+                               *  If litLength != 0:
+                               *      rep == 1 --> offset == repeat_offset_1
+                               *      rep == 2 --> offset == repeat_offset_2
+                               *      rep == 3 --> offset == repeat_offset_3
+                               *  If litLength == 0:
+                               *      rep == 1 --> offset == repeat_offset_2
+                               *      rep == 2 --> offset == repeat_offset_3
+                               *      rep == 3 --> offset == repeat_offset_1 - 1
+                               *
+                               * Note: This field is optional. ZSTD_generateSequences() will calculate the value of
+                               * 'rep', but repeat offsets do not necessarily need to be calculated from an external
+                               * sequence provider's perspective. For example, ZSTD_compressSequences() does not
+                               * use this 'rep' field at all (as of now).
+                               */
+} ZSTD_Sequence;
+
+typedef struct {
+    unsigned windowLog;       /*< largest match distance : larger == more compression, more memory needed during decompression */
+    unsigned chainLog;        /*< fully searched segment : larger == more compression, slower, more memory (useless for fast) */
+    unsigned hashLog;         /*< dispatch table : larger == faster, more memory */
+    unsigned searchLog;       /*< nb of searches : larger == more compression, slower */
+    unsigned minMatch;        /*< match length searched : larger == faster decompression, sometimes less compression */
+    unsigned targetLength;    /*< acceptable match size for optimal parser (only) : larger == more compression, slower */
+    ZSTD_strategy strategy;   /*< see ZSTD_strategy definition above */
+} ZSTD_compressionParameters;
+
+typedef struct {
+    int contentSizeFlag; /*< 1: content size will be in frame header (when known) */
+    int checksumFlag;    /*< 1: generate a 32-bits checksum using XXH64 algorithm at end of frame, for error detection */
+    int noDictIDFlag;    /*< 1: no dictID will be saved into frame header (dictID is only useful for dictionary compression) */
+} ZSTD_frameParameters;
+
+typedef struct {
+    ZSTD_compressionParameters cParams;
+    ZSTD_frameParameters fParams;
+} ZSTD_parameters;
+
+typedef enum {
+    ZSTD_dct_auto = 0,       /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */
+    ZSTD_dct_rawContent = 1, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */
+    ZSTD_dct_fullDict = 2    /* refuses to load a dictionary if it does not respect Zstandard's specification, starting with ZSTD_MAGIC_DICTIONARY */
+} ZSTD_dictContentType_e;
+
+typedef enum {
+    ZSTD_dlm_byCopy = 0,  /*< Copy dictionary content internally */
+    ZSTD_dlm_byRef = 1    /*< Reference dictionary content -- the dictionary buffer must outlive its users. */
+} ZSTD_dictLoadMethod_e;
+
+typedef enum {
+    ZSTD_f_zstd1 = 0,           /* zstd frame format, specified in zstd_compression_format.md (default) */
+    ZSTD_f_zstd1_magicless = 1  /* Variant of zstd frame format, without initial 4-bytes magic number.
+                                 * Useful to save 4 bytes per generated frame.
+                                 * Decoder cannot recognise automatically this format, requiring this instruction. */
+} ZSTD_format_e;
+
+typedef enum {
+    /* Note: this enum controls ZSTD_d_forceIgnoreChecksum */
+    ZSTD_d_validateChecksum = 0,
+    ZSTD_d_ignoreChecksum = 1
+} ZSTD_forceIgnoreChecksum_e;
+
+typedef enum {
+    /* Note: this enum controls ZSTD_d_refMultipleDDicts */
+    ZSTD_rmd_refSingleDDict = 0,
+    ZSTD_rmd_refMultipleDDicts = 1
+} ZSTD_refMultipleDDicts_e;
+
+typedef enum {
+    /* Note: this enum and the behavior it controls are effectively internal
+     * implementation details of the compressor. They are expected to continue
+     * to evolve and should be considered only in the context of extremely
+     * advanced performance tuning.
+     *
+     * Zstd currently supports the use of a CDict in three ways:
+     *
+     * - The contents of the CDict can be copied into the working context. This
+     *   means that the compression can search both the dictionary and input
+     *   while operating on a single set of internal tables. This makes
+     *   the compression faster per-byte of input. However, the initial copy of
+     *   the CDict's tables incurs a fixed cost at the beginning of the
+     *   compression. For small compressions (< 8 KB), that copy can dominate
+     *   the cost of the compression.
+     *
+     * - The CDict's tables can be used in-place. In this model, compression is
+     *   slower per input byte, because the compressor has to search two sets of
+     *   tables. However, this model incurs no start-up cost (as long as the
+     *   working context's tables can be reused). For small inputs, this can be
+     *   faster than copying the CDict's tables.
+     *
+     * - The CDict's tables are not used at all, and instead we use the working
+     *   context alone to reload the dictionary and use params based on the source
+     *   size. See ZSTD_compress_insertDictionary() and ZSTD_compress_usingDict().
+     *   This method is effective when the dictionary sizes are very small relative
+     *   to the input size, and the input size is fairly large to begin with.
+     *
+     * Zstd has a simple internal heuristic that selects which strategy to use
+     * at the beginning of a compression. However, if experimentation shows that
+     * Zstd is making poor choices, it is possible to override that choice with
+     * this enum.
+     */
+    ZSTD_dictDefaultAttach = 0, /* Use the default heuristic. */
+    ZSTD_dictForceAttach   = 1, /* Never copy the dictionary. */
+    ZSTD_dictForceCopy     = 2, /* Always copy the dictionary. */
+    ZSTD_dictForceLoad     = 3  /* Always reload the dictionary */
+} ZSTD_dictAttachPref_e;
+
+typedef enum {
+  ZSTD_lcm_auto = 0,          /*< Automatically determine the compression mode based on the compression level.
+                               *   Negative compression levels will be uncompressed, and positive compression
+                               *   levels will be compressed. */
+  ZSTD_lcm_huffman = 1,       /*< Always attempt Huffman compression. Uncompressed literals will still be
+                               *   emitted if Huffman compression is not profitable. */
+  ZSTD_lcm_uncompressed = 2   /*< Always emit uncompressed literals. */
+} ZSTD_literalCompressionMode_e;
+
+
+/* *************************************
+*  Frame size functions
+***************************************/
+
+/*! ZSTD_findDecompressedSize() :
+ *  `src` should point to the start of a series of ZSTD encoded and/or skippable frames
+ *  `srcSize` must be the _exact_ size of this series
+ *       (i.e. there should be a frame boundary at `src + srcSize`)
+ *  @return : - decompressed size of all data in all successive frames
+ *            - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN
+ *            - if an error occurred: ZSTD_CONTENTSIZE_ERROR
+ *
+ *   note 1 : decompressed size is an optional field, that may not be present, especially in streaming mode.
+ *            When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *   note 2 : decompressed size is always present when compression is done with ZSTD_compress()
+ *   note 3 : decompressed size can be very large (64-bits value),
+ *            potentially larger than what local system can handle as a single memory segment.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *   note 4 : If source is untrusted, decompressed size could be wrong or intentionally modified.
+ *            Always ensure result fits within application's authorized limits.
+ *            Each application can set its own limits.
+ *   note 5 : ZSTD_findDecompressedSize handles multiple frames, and so it must traverse the input to
+ *            read each contained frame header.  This is fast as most of the data is skipped,
+ *            however it does mean that all frame data must be present and valid. */
+ZSTDLIB_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize);
+
+/*! ZSTD_decompressBound() :
+ *  `src` should point to the start of a series of ZSTD encoded and/or skippable frames
+ *  `srcSize` must be the _exact_ size of this series
+ *       (i.e. there should be a frame boundary at `src + srcSize`)
+ *  @return : - upper-bound for the decompressed size of all data in all successive frames
+ *            - if an error occurred: ZSTD_CONTENTSIZE_ERROR
+ *
+ *  note 1  : an error can occur if `src` contains an invalid or incorrectly formatted frame.
+ *  note 2  : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`.
+ *            in this case, `ZSTD_findDecompressedSize` and `ZSTD_decompressBound` return the same value.
+ *  note 3  : when the decompressed size field isn't available, the upper-bound for that frame is calculated by:
+ *              upper-bound = # blocks * min(128 KB, Window_Size)
+ */
+ZSTDLIB_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcSize);
+
+/*! ZSTD_frameHeaderSize() :
+ *  srcSize must be >= ZSTD_FRAMEHEADERSIZE_PREFIX.
+ * @return : size of the Frame Header,
+ *           or an error code (if srcSize is too small) */
+ZSTDLIB_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize);
+
+typedef enum {
+  ZSTD_sf_noBlockDelimiters = 0,         /* Representation of ZSTD_Sequence has no block delimiters, sequences only */
+  ZSTD_sf_explicitBlockDelimiters = 1    /* Representation of ZSTD_Sequence contains explicit block delimiters */
+} ZSTD_sequenceFormat_e;
+
+/*! ZSTD_generateSequences() :
+ * Generate sequences using ZSTD_compress2, given a source buffer.
+ *
+ * Each block will end with a dummy sequence
+ * with offset == 0, matchLength == 0, and litLength == length of last literals.
+ * litLength may be == 0, and if so, then the sequence of (of: 0 ml: 0 ll: 0)
+ * simply acts as a block delimiter.
+ *
+ * zc can be used to insert custom compression params.
+ * This function invokes ZSTD_compress2
+ *
+ * The output of this function can be fed into ZSTD_compressSequences() with CCtx
+ * setting of ZSTD_c_blockDelimiters as ZSTD_sf_explicitBlockDelimiters
+ * @return : number of sequences generated
+ */
+
+ZSTDLIB_API size_t ZSTD_generateSequences(ZSTD_CCtx* zc, ZSTD_Sequence* outSeqs,
+                                          size_t outSeqsSize, const void* src, size_t srcSize);
+
+/*! ZSTD_mergeBlockDelimiters() :
+ * Given an array of ZSTD_Sequence, remove all sequences that represent block delimiters/last literals
+ * by merging them into into the literals of the next sequence.
+ *
+ * As such, the final generated result has no explicit representation of block boundaries,
+ * and the final last literals segment is not represented in the sequences.
+ *
+ * The output of this function can be fed into ZSTD_compressSequences() with CCtx
+ * setting of ZSTD_c_blockDelimiters as ZSTD_sf_noBlockDelimiters
+ * @return : number of sequences left after merging
+ */
+ZSTDLIB_API size_t ZSTD_mergeBlockDelimiters(ZSTD_Sequence* sequences, size_t seqsSize);
+
+/*! ZSTD_compressSequences() :
+ * Compress an array of ZSTD_Sequence, generated from the original source buffer, into dst.
+ * If a dictionary is included, then the cctx should reference the dict. (see: ZSTD_CCtx_refCDict(), ZSTD_CCtx_loadDictionary(), etc.)
+ * The entire source is compressed into a single frame.
+ *
+ * The compression behavior changes based on cctx params. In particular:
+ *    If ZSTD_c_blockDelimiters == ZSTD_sf_noBlockDelimiters, the array of ZSTD_Sequence is expected to contain
+ *    no block delimiters (defined in ZSTD_Sequence). Block boundaries are roughly determined based on
+ *    the block size derived from the cctx, and sequences may be split. This is the default setting.
+ *
+ *    If ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, the array of ZSTD_Sequence is expected to contain
+ *    block delimiters (defined in ZSTD_Sequence). Behavior is undefined if no block delimiters are provided.
+ *
+ *    If ZSTD_c_validateSequences == 0, this function will blindly accept the sequences provided. Invalid sequences cause undefined
+ *    behavior. If ZSTD_c_validateSequences == 1, then if sequence is invalid (see doc/zstd_compression_format.md for
+ *    specifics regarding offset/matchlength requirements) then the function will bail out and return an error.
+ *
+ *    In addition to the two adjustable experimental params, there are other important cctx params.
+ *    - ZSTD_c_minMatch MUST be set as less than or equal to the smallest match generated by the match finder. It has a minimum value of ZSTD_MINMATCH_MIN.
+ *    - ZSTD_c_compressionLevel accordingly adjusts the strength of the entropy coder, as it would in typical compression.
+ *    - ZSTD_c_windowLog affects offset validation: this function will return an error at higher debug levels if a provided offset
+ *      is larger than what the spec allows for a given window log and dictionary (if present). See: doc/zstd_compression_format.md
+ *
+ * Note: Repcodes are, as of now, always re-calculated within this function, so ZSTD_Sequence::rep is unused.
+ * Note 2: Once we integrate ability to ingest repcodes, the explicit block delims mode must respect those repcodes exactly,
+ *         and cannot emit an RLE block that disagrees with the repcode history
+ * @return : final compressed size or a ZSTD error.
+ */
+ZSTDLIB_API size_t ZSTD_compressSequences(ZSTD_CCtx* const cctx, void* dst, size_t dstSize,
+                                  const ZSTD_Sequence* inSeqs, size_t inSeqsSize,
+                                  const void* src, size_t srcSize);
+
+
+/*! ZSTD_writeSkippableFrame() :
+ * Generates a zstd skippable frame containing data given by src, and writes it to dst buffer.
+ *
+ * Skippable frames begin with a a 4-byte magic number. There are 16 possible choices of magic number,
+ * ranging from ZSTD_MAGIC_SKIPPABLE_START to ZSTD_MAGIC_SKIPPABLE_START+15.
+ * As such, the parameter magicVariant controls the exact skippable frame magic number variant used, so
+ * the magic number used will be ZSTD_MAGIC_SKIPPABLE_START + magicVariant.
+ *
+ * Returns an error if destination buffer is not large enough, if the source size is not representable
+ * with a 4-byte unsigned int, or if the parameter magicVariant is greater than 15 (and therefore invalid).
+ *
+ * @return : number of bytes written or a ZSTD error.
+ */
+ZSTDLIB_API size_t ZSTD_writeSkippableFrame(void* dst, size_t dstCapacity,
+                                            const void* src, size_t srcSize, unsigned magicVariant);
+
+
+/* *************************************
+*  Memory management
+***************************************/
+
+/*! ZSTD_estimate*() :
+ *  These functions make it possible to estimate memory usage
+ *  of a future {D,C}Ctx, before its creation.
+ *
+ *  ZSTD_estimateCCtxSize() will provide a memory budget large enough
+ *  for any compression level up to selected one.
+ *  Note : Unlike ZSTD_estimateCStreamSize*(), this estimate
+ *         does not include space for a window buffer.
+ *         Therefore, the estimation is only guaranteed for single-shot compressions, not streaming.
+ *  The estimate will assume the input may be arbitrarily large,
+ *  which is the worst case.
+ *
+ *  When srcSize can be bound by a known and rather "small" value,
+ *  this fact can be used to provide a tighter estimation
+ *  because the CCtx compression context will need less memory.
+ *  This tighter estimation can be provided by more advanced functions
+ *  ZSTD_estimateCCtxSize_usingCParams(), which can be used in tandem with ZSTD_getCParams(),
+ *  and ZSTD_estimateCCtxSize_usingCCtxParams(), which can be used in tandem with ZSTD_CCtxParams_setParameter().
+ *  Both can be used to estimate memory using custom compression parameters and arbitrary srcSize limits.
+ *
+ *  Note 2 : only single-threaded compression is supported.
+ *  ZSTD_estimateCCtxSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1.
+ */
+ZSTDLIB_API size_t ZSTD_estimateCCtxSize(int compressionLevel);
+ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams);
+ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params);
+ZSTDLIB_API size_t ZSTD_estimateDCtxSize(void);
+
+/*! ZSTD_estimateCStreamSize() :
+ *  ZSTD_estimateCStreamSize() will provide a budget large enough for any compression level up to selected one.
+ *  It will also consider src size to be arbitrarily "large", which is worst case.
+ *  If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation.
+ *  ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel.
+ *  ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
+ *  Note : CStream size estimation is only correct for single-threaded compression.
+ *  ZSTD_DStream memory budget depends on window Size.
+ *  This information can be passed manually, using ZSTD_estimateDStreamSize,
+ *  or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame();
+ *  Note : if streaming is init with function ZSTD_init?Stream_usingDict(),
+ *         an internal ?Dict will be created, which additional size is not estimated here.
+ *         In this case, get total size by adding ZSTD_estimate?DictSize */
+ZSTDLIB_API size_t ZSTD_estimateCStreamSize(int compressionLevel);
+ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams);
+ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params);
+ZSTDLIB_API size_t ZSTD_estimateDStreamSize(size_t windowSize);
+ZSTDLIB_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize);
+
+/*! ZSTD_estimate?DictSize() :
+ *  ZSTD_estimateCDictSize() will bet that src size is relatively "small", and content is copied, like ZSTD_createCDict().
+ *  ZSTD_estimateCDictSize_advanced() makes it possible to control compression parameters precisely, like ZSTD_createCDict_advanced().
+ *  Note : dictionaries created by reference (`ZSTD_dlm_byRef`) are logically smaller.
+ */
+ZSTDLIB_API size_t ZSTD_estimateCDictSize(size_t dictSize, int compressionLevel);
+ZSTDLIB_API size_t ZSTD_estimateCDictSize_advanced(size_t dictSize, ZSTD_compressionParameters cParams, ZSTD_dictLoadMethod_e dictLoadMethod);
+ZSTDLIB_API size_t ZSTD_estimateDDictSize(size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod);
+
+/*! ZSTD_initStatic*() :
+ *  Initialize an object using a pre-allocated fixed-size buffer.
+ *  workspace: The memory area to emplace the object into.
+ *             Provided pointer *must be 8-bytes aligned*.
+ *             Buffer must outlive object.
+ *  workspaceSize: Use ZSTD_estimate*Size() to determine
+ *                 how large workspace must be to support target scenario.
+ * @return : pointer to object (same address as workspace, just different type),
+ *           or NULL if error (size too small, incorrect alignment, etc.)
+ *  Note : zstd will never resize nor malloc() when using a static buffer.
+ *         If the object requires more memory than available,
+ *         zstd will just error out (typically ZSTD_error_memory_allocation).
+ *  Note 2 : there is no corresponding "free" function.
+ *           Since workspace is allocated externally, it must be freed externally too.
+ *  Note 3 : cParams : use ZSTD_getCParams() to convert a compression level
+ *           into its associated cParams.
+ *  Limitation 1 : currently not compatible with internal dictionary creation, triggered by
+ *                 ZSTD_CCtx_loadDictionary(), ZSTD_initCStream_usingDict() or ZSTD_initDStream_usingDict().
+ *  Limitation 2 : static cctx currently not compatible with multi-threading.
+ *  Limitation 3 : static dctx is incompatible with legacy support.
+ */
+ZSTDLIB_API ZSTD_CCtx*    ZSTD_initStaticCCtx(void* workspace, size_t workspaceSize);
+ZSTDLIB_API ZSTD_CStream* ZSTD_initStaticCStream(void* workspace, size_t workspaceSize);    /*< same as ZSTD_initStaticCCtx() */
+
+ZSTDLIB_API ZSTD_DCtx*    ZSTD_initStaticDCtx(void* workspace, size_t workspaceSize);
+ZSTDLIB_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize);    /*< same as ZSTD_initStaticDCtx() */
+
+ZSTDLIB_API const ZSTD_CDict* ZSTD_initStaticCDict(
+                                        void* workspace, size_t workspaceSize,
+                                        const void* dict, size_t dictSize,
+                                        ZSTD_dictLoadMethod_e dictLoadMethod,
+                                        ZSTD_dictContentType_e dictContentType,
+                                        ZSTD_compressionParameters cParams);
+
+ZSTDLIB_API const ZSTD_DDict* ZSTD_initStaticDDict(
+                                        void* workspace, size_t workspaceSize,
+                                        const void* dict, size_t dictSize,
+                                        ZSTD_dictLoadMethod_e dictLoadMethod,
+                                        ZSTD_dictContentType_e dictContentType);
+
+
+/*! Custom memory allocation :
+ *  These prototypes make it possible to pass your own allocation/free functions.
+ *  ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below.
+ *  All allocation/free operations will be completed using these custom variants instead of regular <stdlib.h> ones.
+ */
+typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size);
+typedef void  (*ZSTD_freeFunction) (void* opaque, void* address);
+typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem;
+static
+__attribute__((__unused__))
+ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL };  /*< this constant defers to stdlib's functions */
+
+ZSTDLIB_API ZSTD_CCtx*    ZSTD_createCCtx_advanced(ZSTD_customMem customMem);
+ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem);
+ZSTDLIB_API ZSTD_DCtx*    ZSTD_createDCtx_advanced(ZSTD_customMem customMem);
+ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem);
+
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictSize,
+                                                  ZSTD_dictLoadMethod_e dictLoadMethod,
+                                                  ZSTD_dictContentType_e dictContentType,
+                                                  ZSTD_compressionParameters cParams,
+                                                  ZSTD_customMem customMem);
+
+/* ! Thread pool :
+ * These prototypes make it possible to share a thread pool among multiple compression contexts.
+ * This can limit resources for applications with multiple threads where each one uses
+ * a threaded compression mode (via ZSTD_c_nbWorkers parameter).
+ * ZSTD_createThreadPool creates a new thread pool with a given number of threads.
+ * Note that the lifetime of such pool must exist while being used.
+ * ZSTD_CCtx_refThreadPool assigns a thread pool to a context (use NULL argument value
+ * to use an internal thread pool).
+ * ZSTD_freeThreadPool frees a thread pool, accepts NULL pointer.
+ */
+typedef struct POOL_ctx_s ZSTD_threadPool;
+ZSTDLIB_API ZSTD_threadPool* ZSTD_createThreadPool(size_t numThreads);
+ZSTDLIB_API void ZSTD_freeThreadPool (ZSTD_threadPool* pool);  /* accept NULL pointer */
+ZSTDLIB_API size_t ZSTD_CCtx_refThreadPool(ZSTD_CCtx* cctx, ZSTD_threadPool* pool);
+
+
+/*
+ * This API is temporary and is expected to change or disappear in the future!
+ */
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced2(
+    const void* dict, size_t dictSize,
+    ZSTD_dictLoadMethod_e dictLoadMethod,
+    ZSTD_dictContentType_e dictContentType,
+    const ZSTD_CCtx_params* cctxParams,
+    ZSTD_customMem customMem);
+
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_advanced(
+    const void* dict, size_t dictSize,
+    ZSTD_dictLoadMethod_e dictLoadMethod,
+    ZSTD_dictContentType_e dictContentType,
+    ZSTD_customMem customMem);
+
+
+/* *************************************
+*  Advanced compression functions
+***************************************/
+
+/*! ZSTD_createCDict_byReference() :
+ *  Create a digested dictionary for compression
+ *  Dictionary content is just referenced, not duplicated.
+ *  As a consequence, `dictBuffer` **must** outlive CDict,
+ *  and its content must remain unmodified throughout the lifetime of CDict.
+ *  note: equivalent to ZSTD_createCDict_advanced(), with dictLoadMethod==ZSTD_dlm_byRef */
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel);
+
+/*! ZSTD_getDictID_fromCDict() :
+ *  Provides the dictID of the dictionary loaded into `cdict`.
+ *  If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
+ *  Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromCDict(const ZSTD_CDict* cdict);
+
+/*! ZSTD_getCParams() :
+ * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize.
+ * `estimatedSrcSize` value is optional, select 0 if not known */
+ZSTDLIB_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
+
+/*! ZSTD_getParams() :
+ *  same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`.
+ *  All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */
+ZSTDLIB_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
+
+/*! ZSTD_checkCParams() :
+ *  Ensure param values remain within authorized range.
+ * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */
+ZSTDLIB_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params);
+
+/*! ZSTD_adjustCParams() :
+ *  optimize params for a given `srcSize` and `dictSize`.
+ * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN.
+ * `dictSize` must be `0` when there is no dictionary.
+ *  cPar can be invalid : all parameters will be clamped within valid range in the @return struct.
+ *  This function never fails (wide contract) */
+ZSTDLIB_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize);
+
+/*! ZSTD_compress_advanced() :
+ *  Note : this function is now DEPRECATED.
+ *         It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_setParameter() and other parameter setters.
+ *  This prototype will be marked as deprecated and generate compilation warning on reaching v1.5.x */
+ZSTDLIB_API size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx,
+                                          void* dst, size_t dstCapacity,
+                                    const void* src, size_t srcSize,
+                                    const void* dict,size_t dictSize,
+                                          ZSTD_parameters params);
+
+/*! ZSTD_compress_usingCDict_advanced() :
+ *  Note : this function is now REDUNDANT.
+ *         It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_loadDictionary() and other parameter setters.
+ *  This prototype will be marked as deprecated and generate compilation warning in some future version */
+ZSTDLIB_API size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx,
+                                              void* dst, size_t dstCapacity,
+                                        const void* src, size_t srcSize,
+                                        const ZSTD_CDict* cdict,
+                                              ZSTD_frameParameters fParams);
+
+
+/*! ZSTD_CCtx_loadDictionary_byReference() :
+ *  Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx.
+ *  It saves some memory, but also requires that `dict` outlives its usage within `cctx` */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_CCtx_loadDictionary_advanced() :
+ *  Same as ZSTD_CCtx_loadDictionary(), but gives finer control over
+ *  how to load the dictionary (by copy ? by reference ?)
+ *  and how to interpret it (automatic ? force raw mode ? full mode only ?) */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_CCtx_refPrefix_advanced() :
+ *  Same as ZSTD_CCtx_refPrefix(), but gives finer control over
+ *  how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */
+ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
+
+/* ===   experimental parameters   === */
+/* these parameters can be used with ZSTD_setParameter()
+ * they are not guaranteed to remain supported in the future */
+
+ /* Enables rsyncable mode,
+  * which makes compressed files more rsync friendly
+  * by adding periodic synchronization points to the compressed data.
+  * The target average block size is ZSTD_c_jobSize / 2.
+  * It's possible to modify the job size to increase or decrease
+  * the granularity of the synchronization point.
+  * Once the jobSize is smaller than the window size,
+  * it will result in compression ratio degradation.
+  * NOTE 1: rsyncable mode only works when multithreading is enabled.
+  * NOTE 2: rsyncable performs poorly in combination with long range mode,
+  * since it will decrease the effectiveness of synchronization points,
+  * though mileage may vary.
+  * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s.
+  * If the selected compression level is already running significantly slower,
+  * the overall speed won't be significantly impacted.
+  */
+ #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1
+
+/* Select a compression format.
+ * The value must be of type ZSTD_format_e.
+ * See ZSTD_format_e enum definition for details */
+#define ZSTD_c_format ZSTD_c_experimentalParam2
+
+/* Force back-reference distances to remain < windowSize,
+ * even when referencing into Dictionary content (default:0) */
+#define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3
+
+/* Controls whether the contents of a CDict
+ * are used in place, or copied into the working context.
+ * Accepts values from the ZSTD_dictAttachPref_e enum.
+ * See the comments on that enum for an explanation of the feature. */
+#define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4
+
+/* Controls how the literals are compressed (default is auto).
+ * The value must be of type ZSTD_literalCompressionMode_e.
+ * See ZSTD_literalCompressionMode_t enum definition for details.
+ */
+#define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5
+
+/* Tries to fit compressed block size to be around targetCBlockSize.
+ * No target when targetCBlockSize == 0.
+ * There is no guarantee on compressed block size (default:0) */
+#define ZSTD_c_targetCBlockSize ZSTD_c_experimentalParam6
+
+/* User's best guess of source size.
+ * Hint is not valid when srcSizeHint == 0.
+ * There is no guarantee that hint is close to actual source size,
+ * but compression ratio may regress significantly if guess considerably underestimates */
+#define ZSTD_c_srcSizeHint ZSTD_c_experimentalParam7
+
+/* Controls whether the new and experimental "dedicated dictionary search
+ * structure" can be used. This feature is still rough around the edges, be
+ * prepared for surprising behavior!
+ *
+ * How to use it:
+ *
+ * When using a CDict, whether to use this feature or not is controlled at
+ * CDict creation, and it must be set in a CCtxParams set passed into that
+ * construction (via ZSTD_createCDict_advanced2()). A compression will then
+ * use the feature or not based on how the CDict was constructed; the value of
+ * this param, set in the CCtx, will have no effect.
+ *
+ * However, when a dictionary buffer is passed into a CCtx, such as via
+ * ZSTD_CCtx_loadDictionary(), this param can be set on the CCtx to control
+ * whether the CDict that is created internally can use the feature or not.
+ *
+ * What it does:
+ *
+ * Normally, the internal data structures of the CDict are analogous to what
+ * would be stored in a CCtx after compressing the contents of a dictionary.
+ * To an approximation, a compression using a dictionary can then use those
+ * data structures to simply continue what is effectively a streaming
+ * compression where the simulated compression of the dictionary left off.
+ * Which is to say, the search structures in the CDict are normally the same
+ * format as in the CCtx.
+ *
+ * It is possible to do better, since the CDict is not like a CCtx: the search
+ * structures are written once during CDict creation, and then are only read
+ * after that, while the search structures in the CCtx are both read and
+ * written as the compression goes along. This means we can choose a search
+ * structure for the dictionary that is read-optimized.
+ *
+ * This feature enables the use of that different structure.
+ *
+ * Note that some of the members of the ZSTD_compressionParameters struct have
+ * different semantics and constraints in the dedicated search structure. It is
+ * highly recommended that you simply set a compression level in the CCtxParams
+ * you pass into the CDict creation call, and avoid messing with the cParams
+ * directly.
+ *
+ * Effects:
+ *
+ * This will only have any effect when the selected ZSTD_strategy
+ * implementation supports this feature. Currently, that's limited to
+ * ZSTD_greedy, ZSTD_lazy, and ZSTD_lazy2.
+ *
+ * Note that this means that the CDict tables can no longer be copied into the
+ * CCtx, so the dict attachment mode ZSTD_dictForceCopy will no longer be
+ * useable. The dictionary can only be attached or reloaded.
+ *
+ * In general, you should expect compression to be faster--sometimes very much
+ * so--and CDict creation to be slightly slower. Eventually, we will probably
+ * make this mode the default.
+ */
+#define ZSTD_c_enableDedicatedDictSearch ZSTD_c_experimentalParam8
+
+/* ZSTD_c_stableInBuffer
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Tells the compressor that the ZSTD_inBuffer will ALWAYS be the same
+ * between calls, except for the modifications that zstd makes to pos (the
+ * caller must not modify pos). This is checked by the compressor, and
+ * compression will fail if it ever changes. This means the only flush
+ * mode that makes sense is ZSTD_e_end, so zstd will error if ZSTD_e_end
+ * is not used. The data in the ZSTD_inBuffer in the range [src, src + pos)
+ * MUST not be modified during compression or you will get data corruption.
+ *
+ * When this flag is enabled zstd won't allocate an input window buffer,
+ * because the user guarantees it can reference the ZSTD_inBuffer until
+ * the frame is complete. But, it will still allocate an output buffer
+ * large enough to fit a block (see ZSTD_c_stableOutBuffer). This will also
+ * avoid the memcpy() from the input buffer to the input window buffer.
+ *
+ * NOTE: ZSTD_compressStream2() will error if ZSTD_e_end is not used.
+ * That means this flag cannot be used with ZSTD_compressStream().
+ *
+ * NOTE: So long as the ZSTD_inBuffer always points to valid memory, using
+ * this flag is ALWAYS memory safe, and will never access out-of-bounds
+ * memory. However, compression WILL fail if you violate the preconditions.
+ *
+ * WARNING: The data in the ZSTD_inBuffer in the range [dst, dst + pos) MUST
+ * not be modified during compression or you will get data corruption. This
+ * is because zstd needs to reference data in the ZSTD_inBuffer to find
+ * matches. Normally zstd maintains its own window buffer for this purpose,
+ * but passing this flag tells zstd to use the user provided buffer.
+ */
+#define ZSTD_c_stableInBuffer ZSTD_c_experimentalParam9
+
+/* ZSTD_c_stableOutBuffer
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Tells he compressor that the ZSTD_outBuffer will not be resized between
+ * calls. Specifically: (out.size - out.pos) will never grow. This gives the
+ * compressor the freedom to say: If the compressed data doesn't fit in the
+ * output buffer then return ZSTD_error_dstSizeTooSmall. This allows us to
+ * always decompress directly into the output buffer, instead of decompressing
+ * into an internal buffer and copying to the output buffer.
+ *
+ * When this flag is enabled zstd won't allocate an output buffer, because
+ * it can write directly to the ZSTD_outBuffer. It will still allocate the
+ * input window buffer (see ZSTD_c_stableInBuffer).
+ *
+ * Zstd will check that (out.size - out.pos) never grows and return an error
+ * if it does. While not strictly necessary, this should prevent surprises.
+ */
+#define ZSTD_c_stableOutBuffer ZSTD_c_experimentalParam10
+
+/* ZSTD_c_blockDelimiters
+ * Default is 0 == ZSTD_sf_noBlockDelimiters.
+ *
+ * For use with sequence compression API: ZSTD_compressSequences().
+ *
+ * Designates whether or not the given array of ZSTD_Sequence contains block delimiters
+ * and last literals, which are defined as sequences with offset == 0 and matchLength == 0.
+ * See the definition of ZSTD_Sequence for more specifics.
+ */
+#define ZSTD_c_blockDelimiters ZSTD_c_experimentalParam11
+
+/* ZSTD_c_validateSequences
+ * Default is 0 == disabled. Set to 1 to enable sequence validation.
+ *
+ * For use with sequence compression API: ZSTD_compressSequences().
+ * Designates whether or not we validate sequences provided to ZSTD_compressSequences()
+ * during function execution.
+ *
+ * Without validation, providing a sequence that does not conform to the zstd spec will cause
+ * undefined behavior, and may produce a corrupted block.
+ *
+ * With validation enabled, a if sequence is invalid (see doc/zstd_compression_format.md for
+ * specifics regarding offset/matchlength requirements) then the function will bail out and
+ * return an error.
+ *
+ */
+#define ZSTD_c_validateSequences ZSTD_c_experimentalParam12
+
+/*! ZSTD_CCtx_getParameter() :
+ *  Get the requested compression parameter value, selected by enum ZSTD_cParameter,
+ *  and store it into int* value.
+ * @return : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_getParameter(const ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value);
+
+
+/*! ZSTD_CCtx_params :
+ *  Quick howto :
+ *  - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure
+ *  - ZSTD_CCtxParams_setParameter() : Push parameters one by one into
+ *                                     an existing ZSTD_CCtx_params structure.
+ *                                     This is similar to
+ *                                     ZSTD_CCtx_setParameter().
+ *  - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to
+ *                                    an existing CCtx.
+ *                                    These parameters will be applied to
+ *                                    all subsequent frames.
+ *  - ZSTD_compressStream2() : Do compression using the CCtx.
+ *  - ZSTD_freeCCtxParams() : Free the memory, accept NULL pointer.
+ *
+ *  This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams()
+ *  for static allocation of CCtx for single-threaded compression.
+ */
+ZSTDLIB_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void);
+ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params);  /* accept NULL pointer */
+
+/*! ZSTD_CCtxParams_reset() :
+ *  Reset params to default values.
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params);
+
+/*! ZSTD_CCtxParams_init() :
+ *  Initializes the compression parameters of cctxParams according to
+ *  compression level. All other parameters are reset to their default values.
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel);
+
+/*! ZSTD_CCtxParams_init_advanced() :
+ *  Initializes the compression and frame parameters of cctxParams according to
+ *  params. All other parameters are reset to their default values.
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params);
+
+/*! ZSTD_CCtxParams_setParameter() :
+ *  Similar to ZSTD_CCtx_setParameter.
+ *  Set one compression parameter, selected by enum ZSTD_cParameter.
+ *  Parameters must be applied to a ZSTD_CCtx using
+ *  ZSTD_CCtx_setParametersUsingCCtxParams().
+ * @result : a code representing success or failure (which can be tested with
+ *           ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value);
+
+/*! ZSTD_CCtxParams_getParameter() :
+ * Similar to ZSTD_CCtx_getParameter.
+ * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_getParameter(const ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value);
+
+/*! ZSTD_CCtx_setParametersUsingCCtxParams() :
+ *  Apply a set of ZSTD_CCtx_params to the compression context.
+ *  This can be done even after compression is started,
+ *    if nbWorkers==0, this will have no impact until a new compression is started.
+ *    if nbWorkers>=1, new parameters will be picked up at next job,
+ *       with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setParametersUsingCCtxParams(
+        ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params);
+
+/*! ZSTD_compressStream2_simpleArgs() :
+ *  Same as ZSTD_compressStream2(),
+ *  but using only integral types as arguments.
+ *  This variant might be helpful for binders from dynamic languages
+ *  which have troubles handling structures containing memory pointers.
+ */
+ZSTDLIB_API size_t ZSTD_compressStream2_simpleArgs (
+                            ZSTD_CCtx* cctx,
+                            void* dst, size_t dstCapacity, size_t* dstPos,
+                      const void* src, size_t srcSize, size_t* srcPos,
+                            ZSTD_EndDirective endOp);
+
+
+/* *************************************
+*  Advanced decompression functions
+***************************************/
+
+/*! ZSTD_isFrame() :
+ *  Tells if the content of `buffer` starts with a valid Frame Identifier.
+ *  Note : Frame Identifier is 4 bytes. If `size < 4`, @return will always be 0.
+ *  Note 2 : Legacy Frame Identifiers are considered valid only if Legacy Support is enabled.
+ *  Note 3 : Skippable Frame Identifiers are considered valid. */
+ZSTDLIB_API unsigned ZSTD_isFrame(const void* buffer, size_t size);
+
+/*! ZSTD_createDDict_byReference() :
+ *  Create a digested dictionary, ready to start decompression operation without startup delay.
+ *  Dictionary content is referenced, and therefore stays in dictBuffer.
+ *  It is important that dictBuffer outlives DDict,
+ *  it must remain read accessible throughout the lifetime of DDict */
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize);
+
+/*! ZSTD_DCtx_loadDictionary_byReference() :
+ *  Same as ZSTD_DCtx_loadDictionary(),
+ *  but references `dict` content instead of copying it into `dctx`.
+ *  This saves memory if `dict` remains around.,
+ *  However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_DCtx_loadDictionary_advanced() :
+ *  Same as ZSTD_DCtx_loadDictionary(),
+ *  but gives direct control over
+ *  how to load the dictionary (by copy ? by reference ?)
+ *  and how to interpret it (automatic ? force raw mode ? full mode only ?). */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_DCtx_refPrefix_advanced() :
+ *  Same as ZSTD_DCtx_refPrefix(), but gives finer control over
+ *  how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */
+ZSTDLIB_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_DCtx_setMaxWindowSize() :
+ *  Refuses allocating internal buffers for frames requiring a window size larger than provided limit.
+ *  This protects a decoder context from reserving too much memory for itself (potential attack scenario).
+ *  This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
+ *  By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT)
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize);
+
+/*! ZSTD_DCtx_getParameter() :
+ *  Get the requested decompression parameter value, selected by enum ZSTD_dParameter,
+ *  and store it into int* value.
+ * @return : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_getParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int* value);
+
+/* ZSTD_d_format
+ * experimental parameter,
+ * allowing selection between ZSTD_format_e input compression formats
+ */
+#define ZSTD_d_format ZSTD_d_experimentalParam1
+/* ZSTD_d_stableOutBuffer
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Tells the decompressor that the ZSTD_outBuffer will ALWAYS be the same
+ * between calls, except for the modifications that zstd makes to pos (the
+ * caller must not modify pos). This is checked by the decompressor, and
+ * decompression will fail if it ever changes. Therefore the ZSTD_outBuffer
+ * MUST be large enough to fit the entire decompressed frame. This will be
+ * checked when the frame content size is known. The data in the ZSTD_outBuffer
+ * in the range [dst, dst + pos) MUST not be modified during decompression
+ * or you will get data corruption.
+ *
+ * When this flags is enabled zstd won't allocate an output buffer, because
+ * it can write directly to the ZSTD_outBuffer, but it will still allocate
+ * an input buffer large enough to fit any compressed block. This will also
+ * avoid the memcpy() from the internal output buffer to the ZSTD_outBuffer.
+ * If you need to avoid the input buffer allocation use the buffer-less
+ * streaming API.
+ *
+ * NOTE: So long as the ZSTD_outBuffer always points to valid memory, using
+ * this flag is ALWAYS memory safe, and will never access out-of-bounds
+ * memory. However, decompression WILL fail if you violate the preconditions.
+ *
+ * WARNING: The data in the ZSTD_outBuffer in the range [dst, dst + pos) MUST
+ * not be modified during decompression or you will get data corruption. This
+ * is because zstd needs to reference data in the ZSTD_outBuffer to regenerate
+ * matches. Normally zstd maintains its own buffer for this purpose, but passing
+ * this flag tells zstd to use the user provided buffer.
+ */
+#define ZSTD_d_stableOutBuffer ZSTD_d_experimentalParam2
+
+/* ZSTD_d_forceIgnoreChecksum
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable
+ *
+ * Tells the decompressor to skip checksum validation during decompression, regardless
+ * of whether checksumming was specified during compression. This offers some
+ * slight performance benefits, and may be useful for debugging.
+ * Param has values of type ZSTD_forceIgnoreChecksum_e
+ */
+#define ZSTD_d_forceIgnoreChecksum ZSTD_d_experimentalParam3
+
+/* ZSTD_d_refMultipleDDicts
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable
+ *
+ * If enabled and dctx is allocated on the heap, then additional memory will be allocated
+ * to store references to multiple ZSTD_DDict. That is, multiple calls of ZSTD_refDDict()
+ * using a given ZSTD_DCtx, rather than overwriting the previous DDict reference, will instead
+ * store all references. At decompression time, the appropriate dictID is selected
+ * from the set of DDicts based on the dictID in the frame.
+ *
+ * Usage is simply calling ZSTD_refDDict() on multiple dict buffers.
+ *
+ * Param has values of byte ZSTD_refMultipleDDicts_e
+ *
+ * WARNING: Enabling this parameter and calling ZSTD_DCtx_refDDict(), will trigger memory
+ * allocation for the hash table. ZSTD_freeDCtx() also frees this memory.
+ * Memory is allocated as per ZSTD_DCtx::customMem.
+ *
+ * Although this function allocates memory for the table, the user is still responsible for
+ * memory management of the underlying ZSTD_DDict* themselves.
+ */
+#define ZSTD_d_refMultipleDDicts ZSTD_d_experimentalParam4
+
+
+/*! ZSTD_DCtx_setFormat() :
+ *  Instruct the decoder context about what kind of data to decode next.
+ *  This instruction is mandatory to decode data without a fully-formed header,
+ *  such ZSTD_f_zstd1_magicless for example.
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()). */
+ZSTDLIB_API size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format);
+
+/*! ZSTD_decompressStream_simpleArgs() :
+ *  Same as ZSTD_decompressStream(),
+ *  but using only integral types as arguments.
+ *  This can be helpful for binders from dynamic languages
+ *  which have troubles handling structures containing memory pointers.
+ */
+ZSTDLIB_API size_t ZSTD_decompressStream_simpleArgs (
+                            ZSTD_DCtx* dctx,
+                            void* dst, size_t dstCapacity, size_t* dstPos,
+                      const void* src, size_t srcSize, size_t* srcPos);
+
+
+/* ******************************************************************
+*  Advanced streaming functions
+*  Warning : most of these functions are now redundant with the Advanced API.
+*  Once Advanced API reaches "stable" status,
+*  redundant functions will be deprecated, and then at some point removed.
+********************************************************************/
+
+/*=====   Advanced Streaming compression functions  =====*/
+
+/*! ZSTD_initCStream_srcSize() :
+ * This function is deprecated, and equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any)
+ *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *
+ * pledgedSrcSize must be correct. If it is not known at init time, use
+ * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs,
+ * "0" also disables frame content size field. It may be enabled in the future.
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_API size_t
+ZSTD_initCStream_srcSize(ZSTD_CStream* zcs,
+                         int compressionLevel,
+                         unsigned long long pledgedSrcSize);
+
+/*! ZSTD_initCStream_usingDict() :
+ * This function is deprecated, and is equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ *     ZSTD_CCtx_loadDictionary(zcs, dict, dictSize);
+ *
+ * Creates of an internal CDict (incompatible with static CCtx), except if
+ * dict == NULL or dictSize < 8, in which case no dict is used.
+ * Note: dict is loaded with ZSTD_dct_auto (treated as a full zstd dictionary if
+ * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy.
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_API size_t
+ZSTD_initCStream_usingDict(ZSTD_CStream* zcs,
+                     const void* dict, size_t dictSize,
+                           int compressionLevel);
+
+/*! ZSTD_initCStream_advanced() :
+ * This function is deprecated, and is approximately equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     // Pseudocode: Set each zstd parameter and leave the rest as-is.
+ *     for ((param, value) : params) {
+ *         ZSTD_CCtx_setParameter(zcs, param, value);
+ *     }
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *     ZSTD_CCtx_loadDictionary(zcs, dict, dictSize);
+ *
+ * dict is loaded with ZSTD_dct_auto and ZSTD_dlm_byCopy.
+ * pledgedSrcSize must be correct.
+ * If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN.
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_API size_t
+ZSTD_initCStream_advanced(ZSTD_CStream* zcs,
+                    const void* dict, size_t dictSize,
+                          ZSTD_parameters params,
+                          unsigned long long pledgedSrcSize);
+
+/*! ZSTD_initCStream_usingCDict() :
+ * This function is deprecated, and equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_refCDict(zcs, cdict);
+ *
+ * note : cdict will just be referenced, and must outlive compression session
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict);
+
+/*! ZSTD_initCStream_usingCDict_advanced() :
+ *   This function is DEPRECATED, and is approximately equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     // Pseudocode: Set each zstd frame parameter and leave the rest as-is.
+ *     for ((fParam, value) : fParams) {
+ *         ZSTD_CCtx_setParameter(zcs, fParam, value);
+ *     }
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *     ZSTD_CCtx_refCDict(zcs, cdict);
+ *
+ * same as ZSTD_initCStream_usingCDict(), with control over frame parameters.
+ * pledgedSrcSize must be correct. If srcSize is not known at init time, use
+ * value ZSTD_CONTENTSIZE_UNKNOWN.
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_API size_t
+ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs,
+                               const ZSTD_CDict* cdict,
+                                     ZSTD_frameParameters fParams,
+                                     unsigned long long pledgedSrcSize);
+
+/*! ZSTD_resetCStream() :
+ * This function is deprecated, and is equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *
+ *  start a new frame, using same parameters from previous frame.
+ *  This is typically useful to skip dictionary loading stage, since it will re-use it in-place.
+ *  Note that zcs must be init at least once before using ZSTD_resetCStream().
+ *  If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN.
+ *  If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end.
+ *  For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs,
+ *  but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead.
+ * @return : 0, or an error code (which can be tested using ZSTD_isError())
+ *  Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_API size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize);
+
+
+typedef struct {
+    unsigned long long ingested;   /* nb input bytes read and buffered */
+    unsigned long long consumed;   /* nb input bytes actually compressed */
+    unsigned long long produced;   /* nb of compressed bytes generated and buffered */
+    unsigned long long flushed;    /* nb of compressed bytes flushed : not provided; can be tracked from caller side */
+    unsigned currentJobID;         /* MT only : latest started job nb */
+    unsigned nbActiveWorkers;      /* MT only : nb of workers actively compressing at probe time */
+} ZSTD_frameProgression;
+
+/* ZSTD_getFrameProgression() :
+ * tells how much data has been ingested (read from input)
+ * consumed (input actually compressed) and produced (output) for current frame.
+ * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed.
+ * Aggregates progression inside active worker threads.
+ */
+ZSTDLIB_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx);
+
+/*! ZSTD_toFlushNow() :
+ *  Tell how many bytes are ready to be flushed immediately.
+ *  Useful for multithreading scenarios (nbWorkers >= 1).
+ *  Probe the oldest active job, defined as oldest job not yet entirely flushed,
+ *  and check its output buffer.
+ * @return : amount of data stored in oldest job and ready to be flushed immediately.
+ *  if @return == 0, it means either :
+ *  + there is no active job (could be checked with ZSTD_frameProgression()), or
+ *  + oldest job is still actively compressing data,
+ *    but everything it has produced has also been flushed so far,
+ *    therefore flush speed is limited by production speed of oldest job
+ *    irrespective of the speed of concurrent (and newer) jobs.
+ */
+ZSTDLIB_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx);
+
+
+/*=====   Advanced Streaming decompression functions  =====*/
+
+/*!
+ * This function is deprecated, and is equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *     ZSTD_DCtx_loadDictionary(zds, dict, dictSize);
+ *
+ * note: no dictionary will be used if dict == NULL or dictSize < 8
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize);
+
+/*!
+ * This function is deprecated, and is equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *     ZSTD_DCtx_refDDict(zds, ddict);
+ *
+ * note : ddict is referenced, it must outlive decompression session
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);
+
+/*!
+ * This function is deprecated, and is equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *
+ * re-use decompression parameters from previous init; saves dictionary loading
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);
+
+
+/* *******************************************************************
+*  Buffer-less and synchronous inner streaming functions
+*
+*  This is an advanced API, giving full control over buffer management, for users which need direct control over memory.
+*  But it's also a complex one, with several restrictions, documented below.
+*  Prefer normal streaming API for an easier experience.
+********************************************************************* */
+
+/*
+  Buffer-less streaming compression (synchronous mode)
+
+  A ZSTD_CCtx object is required to track streaming operations.
+  Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource.
+  ZSTD_CCtx object can be re-used multiple times within successive compression operations.
+
+  Start by initializing a context.
+  Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression,
+  or ZSTD_compressBegin_advanced(), for finer parameter control.
+  It's also possible to duplicate a reference context which has already been initialized, using ZSTD_copyCCtx()
+
+  Then, consume your input using ZSTD_compressContinue().
+  There are some important considerations to keep in mind when using this advanced function :
+  - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only.
+  - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks.
+  - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario.
+    Worst case evaluation is provided by ZSTD_compressBound().
+    ZSTD_compressContinue() doesn't guarantee recover after a failed compression.
+  - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog).
+    It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks)
+  - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps.
+    In which case, it will "discard" the relevant memory section from its history.
+
+  Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum.
+  It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame.
+  Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders.
+
+  `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again.
+*/
+
+/*=====   Buffer-less streaming compression functions  =====*/
+ZSTDLIB_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel);
+ZSTDLIB_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel);
+ZSTDLIB_API size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /*< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */
+ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /*< note: fails if cdict==NULL */
+ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize);   /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */
+ZSTDLIB_API size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /*<  note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */
+
+ZSTDLIB_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+ZSTDLIB_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+
+
+/*
+  Buffer-less streaming decompression (synchronous mode)
+
+  A ZSTD_DCtx object is required to track streaming operations.
+  Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it.
+  A ZSTD_DCtx object can be re-used multiple times.
+
+  First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader().
+  Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough.
+  Data fragment must be large enough to ensure successful decoding.
+ `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough.
+  @result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled.
+           >0 : `srcSize` is too small, please provide at least @result bytes on next attempt.
+           errorCode, which can be tested using ZSTD_isError().
+
+  It fills a ZSTD_frameHeader structure with important information to correctly decode the frame,
+  such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`).
+  Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information.
+  As a consequence, check that values remain within valid application range.
+  For example, do not allocate memory blindly, check that `windowSize` is within expectation.
+  Each application can set its own limits, depending on local restrictions.
+  For extended interoperability, it is recommended to support `windowSize` of at least 8 MB.
+
+  ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes.
+  ZSTD_decompressContinue() is very sensitive to contiguity,
+  if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place,
+  or that previous contiguous segment is large enough to properly handle maximum back-reference distance.
+  There are multiple ways to guarantee this condition.
+
+  The most memory efficient way is to use a round buffer of sufficient size.
+  Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(),
+  which can @return an error code if required value is too large for current system (in 32-bits mode).
+  In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one,
+  up to the moment there is not enough room left in the buffer to guarantee decoding another full block,
+  which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`.
+  At which point, decoding can resume from the beginning of the buffer.
+  Note that already decoded data stored in the buffer should be flushed before being overwritten.
+
+  There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory.
+
+  Finally, if you control the compression process, you can also ignore all buffer size rules,
+  as long as the encoder and decoder progress in "lock-step",
+  aka use exactly the same buffer sizes, break contiguity at the same place, etc.
+
+  Once buffers are setup, start decompression, with ZSTD_decompressBegin().
+  If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict().
+
+  Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively.
+  ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue().
+  ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail.
+
+ @result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity).
+  It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item.
+  It can also be an error code, which can be tested with ZSTD_isError().
+
+  A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero.
+  Context can then be reset to start a new decompression.
+
+  Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType().
+  This information is not required to properly decode a frame.
+
+  == Special case : skippable frames ==
+
+  Skippable frames allow integration of user-defined data into a flow of concatenated frames.
+  Skippable frames will be ignored (skipped) by decompressor.
+  The format of skippable frames is as follows :
+  a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F
+  b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits
+  c) Frame Content - any content (User Data) of length equal to Frame Size
+  For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame.
+  For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content.
+*/
+
+/*=====   Buffer-less streaming decompression functions  =====*/
+typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_frameType_e;
+typedef struct {
+    unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */
+    unsigned long long windowSize;       /* can be very large, up to <= frameContentSize */
+    unsigned blockSizeMax;
+    ZSTD_frameType_e frameType;          /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */
+    unsigned headerSize;
+    unsigned dictID;
+    unsigned checksumFlag;
+} ZSTD_frameHeader;
+
+/*! ZSTD_getFrameHeader() :
+ *  decode Frame Header, or requires larger `srcSize`.
+ * @return : 0, `zfhPtr` is correctly filled,
+ *          >0, `srcSize` is too small, value is wanted `srcSize` amount,
+ *           or an error code, which can be tested using ZSTD_isError() */
+ZSTDLIB_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize);   /*< doesn't consume input */
+/*! ZSTD_getFrameHeader_advanced() :
+ *  same as ZSTD_getFrameHeader(),
+ *  with added capability to select a format (like ZSTD_f_zstd1_magicless) */
+ZSTDLIB_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format);
+ZSTDLIB_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize);  /*< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */
+
+ZSTDLIB_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+ZSTDLIB_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
+
+ZSTDLIB_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+
+/* misc */
+ZSTDLIB_API void   ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx);
+typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e;
+ZSTDLIB_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx);
+
+
+
+
+/* ============================ */
+/*       Block level API       */
+/* ============================ */
+
+/*!
+    Block functions produce and decode raw zstd blocks, without frame metadata.
+    Frame metadata cost is typically ~12 bytes, which can be non-negligible for very small blocks (< 100 bytes).
+    But users will have to take in charge needed metadata to regenerate data, such as compressed and content sizes.
+
+    A few rules to respect :
+    - Compressing and decompressing require a context structure
+      + Use ZSTD_createCCtx() and ZSTD_createDCtx()
+    - It is necessary to init context before starting
+      + compression : any ZSTD_compressBegin*() variant, including with dictionary
+      + decompression : any ZSTD_decompressBegin*() variant, including with dictionary
+      + copyCCtx() and copyDCtx() can be used too
+    - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB
+      + If input is larger than a block size, it's necessary to split input data into multiple blocks
+      + For inputs larger than a single block, consider using regular ZSTD_compress() instead.
+        Frame metadata is not that costly, and quickly becomes negligible as source size grows larger than a block.
+    - When a block is considered not compressible enough, ZSTD_compressBlock() result will be 0 (zero) !
+      ===> In which case, nothing is produced into `dst` !
+      + User __must__ test for such outcome and deal directly with uncompressed data
+      + A block cannot be declared incompressible if ZSTD_compressBlock() return value was != 0.
+        Doing so would mess up with statistics history, leading to potential data corruption.
+      + ZSTD_decompressBlock() _doesn't accept uncompressed data as input_ !!
+      + In case of multiple successive blocks, should some of them be uncompressed,
+        decoder must be informed of their existence in order to follow proper history.
+        Use ZSTD_insertBlock() for such a case.
+*/
+
+/*=====   Raw zstd block functions  =====*/
+ZSTDLIB_API size_t ZSTD_getBlockSize   (const ZSTD_CCtx* cctx);
+ZSTDLIB_API size_t ZSTD_compressBlock  (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+ZSTDLIB_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+ZSTDLIB_API size_t ZSTD_insertBlock    (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize);  /*< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */
+
+
+#endif   /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */
+
diff --git a/include/uapi/linux/virtio_mem.h b/include/uapi/linux/virtio_mem.h
index 70e01c6..e9122f1 100644
--- a/include/uapi/linux/virtio_mem.h
+++ b/include/uapi/linux/virtio_mem.h
@@ -68,9 +68,10 @@
  * explicitly triggered (VIRTIO_MEM_REQ_UNPLUG).
  *
  * There are no guarantees what will happen if unplugged memory is
- * read/written. Such memory should, in general, not be touched. E.g.,
- * even writing might succeed, but the values will simply be discarded at
- * random points in time.
+ * read/written. In general, unplugged memory should not be touched, because
+ * the resulting action is undefined. There is one exception: without
+ * VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, unplugged memory inside the usable
+ * region can be read, to simplify creation of memory dumps.
  *
  * It can happen that the device cannot process a request, because it is
  * busy. The device driver has to retry later.
@@ -87,6 +88,8 @@
 
 /* node_id is an ACPI PXM and is valid */
 #define VIRTIO_MEM_F_ACPI_PXM		0
+/* unplugged memory must not be accessed */
+#define VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE	1
 
 
 /* --- virtio-mem: guest -> host requests --- */
diff --git a/init/Makefile b/init/Makefile
index 2846113..04eeee12 100644
--- a/init/Makefile
+++ b/init/Makefile
@@ -30,7 +30,7 @@
 quiet_cmd_compile.h = CHK     $@
       cmd_compile.h = \
 	$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@	\
-	"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)"	\
+	"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT_BUILD)"	\
 	"$(CONFIG_PREEMPT_RT)" $(CONFIG_CC_VERSION_TEXT) "$(LD)"
 
 include/generated/compile.h: FORCE
diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt
index 60f1bfc..ce77f02 100644
--- a/kernel/Kconfig.preempt
+++ b/kernel/Kconfig.preempt
@@ -1,12 +1,23 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
+config PREEMPT_NONE_BUILD
+	bool
+
+config PREEMPT_VOLUNTARY_BUILD
+	bool
+
+config PREEMPT_BUILD
+	bool
+	select PREEMPTION
+	select UNINLINE_SPIN_UNLOCK if !ARCH_INLINE_SPIN_UNLOCK
+
 choice
 	prompt "Preemption Model"
-	default PREEMPT_NONE_BEHAVIOUR
+	default PREEMPT_NONE
 
-config PREEMPT_NONE_BEHAVIOUR
+config PREEMPT_NONE
 	bool "No Forced Preemption (Server)"
-	select PREEMPT_NONE if !PREEMPT_DYNAMIC
+	select PREEMPT_NONE_BUILD if !PREEMPT_DYNAMIC
 	help
 	  This is the traditional Linux preemption model, geared towards
 	  throughput. It will still provide good latencies most of the
@@ -18,10 +29,10 @@
 	  raw processing power of the kernel, irrespective of scheduling
 	  latencies.
 
-config PREEMPT_VOLUNTARY_BEHAVIOUR
+config PREEMPT_VOLUNTARY
 	bool "Voluntary Kernel Preemption (Desktop)"
 	depends on !ARCH_NO_PREEMPT
-	select PREEMPT_VOLUNTARY if !PREEMPT_DYNAMIC
+	select PREEMPT_VOLUNTARY_BUILD if !PREEMPT_DYNAMIC
 	help
 	  This option reduces the latency of the kernel by adding more
 	  "explicit preemption points" to the kernel code. These new
@@ -37,10 +48,10 @@
 
 	  Select this if you are building a kernel for a desktop system.
 
-config PREEMPT_BEHAVIOUR
+config PREEMPT
 	bool "Preemptible Kernel (Low-Latency Desktop)"
 	depends on !ARCH_NO_PREEMPT
-	select PREEMPT
+	select PREEMPT_BUILD
 	help
 	  This option reduces the latency of the kernel by making
 	  all kernel code (that is not executing in a critical section)
@@ -58,7 +69,7 @@
 
 config PREEMPT_RT
 	bool "Fully Preemptible Kernel (Real-Time)"
-	depends on EXPERT && ARCH_SUPPORTS_RT && !PREEMPT_DYNAMIC
+	depends on EXPERT && ARCH_SUPPORTS_RT
 	select PREEMPTION
 	help
 	  This option turns the kernel into a real-time kernel by replacing
@@ -75,17 +86,6 @@
 
 endchoice
 
-config PREEMPT_NONE
-	bool
-
-config PREEMPT_VOLUNTARY
-	bool
-
-config PREEMPT
-	bool
-	select PREEMPTION
-	select UNINLINE_SPIN_UNLOCK if !ARCH_INLINE_SPIN_UNLOCK
-
 config PREEMPT_COUNT
        bool
 
@@ -95,8 +95,8 @@
 
 config PREEMPT_DYNAMIC
 	bool "Preemption behaviour defined on boot"
-	depends on HAVE_PREEMPT_DYNAMIC
-	select PREEMPT
+	depends on HAVE_PREEMPT_DYNAMIC && !PREEMPT_RT
+	select PREEMPT_BUILD
 	default y
 	help
 	  This option allows to define the preemption model on the kernel
diff --git a/kernel/events/core.c b/kernel/events/core.c
index f2253ea..523106a 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -7154,7 +7154,6 @@
 static u64 perf_virt_to_phys(u64 virt)
 {
 	u64 phys_addr = 0;
-	struct page *p = NULL;
 
 	if (!virt)
 		return 0;
@@ -7173,14 +7172,15 @@
 		 * If failed, leave phys_addr as 0.
 		 */
 		if (current->mm != NULL) {
+			struct page *p;
+
 			pagefault_disable();
-			if (get_user_page_fast_only(virt, 0, &p))
+			if (get_user_page_fast_only(virt, 0, &p)) {
 				phys_addr = page_to_phys(p) + virt % PAGE_SIZE;
+				put_page(p);
+			}
 			pagefault_enable();
 		}
-
-		if (p)
-			put_page(p);
 	}
 
 	return phys_addr;
diff --git a/kernel/fork.c b/kernel/fork.c
index 5de23f3..3244cc5 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2277,6 +2277,7 @@
 	p->pdeath_signal = 0;
 	INIT_LIST_HEAD(&p->thread_group);
 	p->task_works = NULL;
+	clear_posix_cputimers_work(p);
 
 #ifdef CONFIG_KRETPROBES
 	p->kretprobe_instances.first = NULL;
diff --git a/kernel/irq/msi.c b/kernel/irq/msi.c
index 6a5ecee..7f350ae 100644
--- a/kernel/irq/msi.c
+++ b/kernel/irq/msi.c
@@ -529,10 +529,10 @@
 
 	/*
 	 * Checking the first MSI descriptor is sufficient. MSIX supports
-	 * masking and MSI does so when the maskbit is set.
+	 * masking and MSI does so when the can_mask attribute is set.
 	 */
 	desc = first_msi_entry(dev);
-	return desc->msi_attrib.is_msix || desc->msi_attrib.maskbit;
+	return desc->msi_attrib.is_msix || desc->msi_attrib.can_mask;
 }
 
 int __msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev,
diff --git a/kernel/sched/autogroup.c b/kernel/sched/autogroup.c
index 2067080..8629b37 100644
--- a/kernel/sched/autogroup.c
+++ b/kernel/sched/autogroup.c
@@ -31,7 +31,7 @@
 	ag->tg->rt_se = NULL;
 	ag->tg->rt_rq = NULL;
 #endif
-	sched_offline_group(ag->tg);
+	sched_release_group(ag->tg);
 	sched_destroy_group(ag->tg);
 }
 
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 523fd60..3c9b0fd 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3726,6 +3726,9 @@
 
 bool cpus_share_cache(int this_cpu, int that_cpu)
 {
+	if (this_cpu == that_cpu)
+		return true;
+
 	return per_cpu(sd_llc_id, this_cpu) == per_cpu(sd_llc_id, that_cpu);
 }
 
@@ -6625,13 +6628,13 @@
 static void __init preempt_dynamic_init(void)
 {
 	if (preempt_dynamic_mode == preempt_dynamic_undefined) {
-		if (IS_ENABLED(CONFIG_PREEMPT_NONE_BEHAVIOUR)) {
+		if (IS_ENABLED(CONFIG_PREEMPT_NONE)) {
 			sched_dynamic_update(preempt_dynamic_none);
-		} else if (IS_ENABLED(CONFIG_PREEMPT_VOLUNTARY_BEHAVIOUR)) {
+		} else if (IS_ENABLED(CONFIG_PREEMPT_VOLUNTARY)) {
 			sched_dynamic_update(preempt_dynamic_voluntary);
 		} else {
 			/* Default static call setting, nothing to do */
-			WARN_ON_ONCE(!IS_ENABLED(CONFIG_PREEMPT_BEHAVIOUR));
+			WARN_ON_ONCE(!IS_ENABLED(CONFIG_PREEMPT));
 			preempt_dynamic_mode = preempt_dynamic_full;
 			pr_info("Dynamic Preempt: full\n");
 		}
@@ -9716,6 +9719,22 @@
 	kmem_cache_free(task_group_cache, tg);
 }
 
+static void sched_free_group_rcu(struct rcu_head *rcu)
+{
+	sched_free_group(container_of(rcu, struct task_group, rcu));
+}
+
+static void sched_unregister_group(struct task_group *tg)
+{
+	unregister_fair_sched_group(tg);
+	unregister_rt_sched_group(tg);
+	/*
+	 * We have to wait for yet another RCU grace period to expire, as
+	 * print_cfs_stats() might run concurrently.
+	 */
+	call_rcu(&tg->rcu, sched_free_group_rcu);
+}
+
 /* allocate runqueue etc for a new task group */
 struct task_group *sched_create_group(struct task_group *parent)
 {
@@ -9759,25 +9778,35 @@
 }
 
 /* rcu callback to free various structures associated with a task group */
-static void sched_free_group_rcu(struct rcu_head *rhp)
+static void sched_unregister_group_rcu(struct rcu_head *rhp)
 {
 	/* Now it should be safe to free those cfs_rqs: */
-	sched_free_group(container_of(rhp, struct task_group, rcu));
+	sched_unregister_group(container_of(rhp, struct task_group, rcu));
 }
 
 void sched_destroy_group(struct task_group *tg)
 {
 	/* Wait for possible concurrent references to cfs_rqs complete: */
-	call_rcu(&tg->rcu, sched_free_group_rcu);
+	call_rcu(&tg->rcu, sched_unregister_group_rcu);
 }
 
-void sched_offline_group(struct task_group *tg)
+void sched_release_group(struct task_group *tg)
 {
 	unsigned long flags;
 
-	/* End participation in shares distribution: */
-	unregister_fair_sched_group(tg);
-
+	/*
+	 * Unlink first, to avoid walk_tg_tree_from() from finding us (via
+	 * sched_cfs_period_timer()).
+	 *
+	 * For this to be effective, we have to wait for all pending users of
+	 * this task group to leave their RCU critical section to ensure no new
+	 * user will see our dying task group any more. Specifically ensure
+	 * that tg_unthrottle_up() won't add decayed cfs_rq's to it.
+	 *
+	 * We therefore defer calling unregister_fair_sched_group() to
+	 * sched_unregister_group() which is guarantied to get called only after the
+	 * current RCU grace period has expired.
+	 */
 	spin_lock_irqsave(&task_group_lock, flags);
 	list_del_rcu(&tg->list);
 	list_del_rcu(&tg->siblings);
@@ -9896,7 +9925,7 @@
 {
 	struct task_group *tg = css_tg(css);
 
-	sched_offline_group(tg);
+	sched_release_group(tg);
 }
 
 static void cpu_cgroup_css_free(struct cgroup_subsys_state *css)
@@ -9906,7 +9935,7 @@
 	/*
 	 * Relies on the RCU grace period between css_released() and this.
 	 */
-	sched_free_group(tg);
+	sched_unregister_group(tg);
 }
 
 /*
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 13950be..6e476f6 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -11456,8 +11456,6 @@
 {
 	int i;
 
-	destroy_cfs_bandwidth(tg_cfs_bandwidth(tg));
-
 	for_each_possible_cpu(i) {
 		if (tg->cfs_rq)
 			kfree(tg->cfs_rq[i]);
@@ -11534,6 +11532,8 @@
 	struct rq *rq;
 	int cpu;
 
+	destroy_cfs_bandwidth(tg_cfs_bandwidth(tg));
+
 	for_each_possible_cpu(cpu) {
 		if (tg->se[cpu])
 			remove_entity_load_avg(tg->se[cpu]);
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index bb945f8..b48baab 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -137,13 +137,17 @@
 	return rt_rq->rq;
 }
 
+void unregister_rt_sched_group(struct task_group *tg)
+{
+	if (tg->rt_se)
+		destroy_rt_bandwidth(&tg->rt_bandwidth);
+
+}
+
 void free_rt_sched_group(struct task_group *tg)
 {
 	int i;
 
-	if (tg->rt_se)
-		destroy_rt_bandwidth(&tg->rt_bandwidth);
-
 	for_each_possible_cpu(i) {
 		if (tg->rt_rq)
 			kfree(tg->rt_rq[i]);
@@ -250,6 +254,8 @@
 	return &rq->rt;
 }
 
+void unregister_rt_sched_group(struct task_group *tg) { }
+
 void free_rt_sched_group(struct task_group *tg) { }
 
 int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent)
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 7f1612d..0e66749 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -488,6 +488,7 @@
 extern void start_cfs_bandwidth(struct cfs_bandwidth *cfs_b);
 extern void unthrottle_cfs_rq(struct cfs_rq *cfs_rq);
 
+extern void unregister_rt_sched_group(struct task_group *tg);
 extern void free_rt_sched_group(struct task_group *tg);
 extern int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent);
 extern void init_tg_rt_entry(struct task_group *tg, struct rt_rq *rt_rq,
@@ -503,7 +504,7 @@
 extern void sched_online_group(struct task_group *tg,
 			       struct task_group *parent);
 extern void sched_destroy_group(struct task_group *tg);
-extern void sched_offline_group(struct task_group *tg);
+extern void sched_release_group(struct task_group *tg);
 
 extern void sched_move_task(struct task_struct *tsk);
 
diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c
index 643d412..96b4e78 100644
--- a/kernel/time/posix-cpu-timers.c
+++ b/kernel/time/posix-cpu-timers.c
@@ -1159,13 +1159,28 @@
 }
 
 /*
+ * Clear existing posix CPU timers task work.
+ */
+void clear_posix_cputimers_work(struct task_struct *p)
+{
+	/*
+	 * A copied work entry from the old task is not meaningful, clear it.
+	 * N.B. init_task_work will not do this.
+	 */
+	memset(&p->posix_cputimers_work.work, 0,
+	       sizeof(p->posix_cputimers_work.work));
+	init_task_work(&p->posix_cputimers_work.work,
+		       posix_cpu_timers_work);
+	p->posix_cputimers_work.scheduled = false;
+}
+
+/*
  * Initialize posix CPU timers task work in init task. Out of line to
  * keep the callback static and to avoid header recursion hell.
  */
 void __init posix_cputimers_init_work(void)
 {
-	init_task_work(&current->posix_cputimers_work.work,
-		       posix_cpu_timers_work);
+	clear_posix_cputimers_work(current);
 }
 
 /*
diff --git a/lib/decompress_unzstd.c b/lib/decompress_unzstd.c
index 6b629ab..a512b99 100644
--- a/lib/decompress_unzstd.c
+++ b/lib/decompress_unzstd.c
@@ -68,11 +68,7 @@
 #ifdef STATIC
 # define UNZSTD_PREBOOT
 # include "xxhash.c"
-# include "zstd/entropy_common.c"
-# include "zstd/fse_decompress.c"
-# include "zstd/huf_decompress.c"
-# include "zstd/zstd_common.c"
-# include "zstd/decompress.c"
+# include "zstd/decompress_sources.h"
 #endif
 
 #include <linux/decompress/mm.h>
@@ -91,11 +87,15 @@
 
 static int INIT handle_zstd_error(size_t ret, void (*error)(char *x))
 {
-	const int err = ZSTD_getErrorCode(ret);
+	const zstd_error_code err = zstd_get_error_code(ret);
 
-	if (!ZSTD_isError(ret))
+	if (!zstd_is_error(ret))
 		return 0;
 
+	/*
+	 * zstd_get_error_name() cannot be used because error takes a char *
+	 * not a const char *
+	 */
 	switch (err) {
 	case ZSTD_error_memory_allocation:
 		error("ZSTD decompressor ran out of memory");
@@ -124,28 +124,28 @@
 				  long out_len, long *in_pos,
 				  void (*error)(char *x))
 {
-	const size_t wksp_size = ZSTD_DCtxWorkspaceBound();
+	const size_t wksp_size = zstd_dctx_workspace_bound();
 	void *wksp = large_malloc(wksp_size);
-	ZSTD_DCtx *dctx = ZSTD_initDCtx(wksp, wksp_size);
+	zstd_dctx *dctx = zstd_init_dctx(wksp, wksp_size);
 	int err;
 	size_t ret;
 
 	if (dctx == NULL) {
-		error("Out of memory while allocating ZSTD_DCtx");
+		error("Out of memory while allocating zstd_dctx");
 		err = -1;
 		goto out;
 	}
 	/*
 	 * Find out how large the frame actually is, there may be junk at
-	 * the end of the frame that ZSTD_decompressDCtx() can't handle.
+	 * the end of the frame that zstd_decompress_dctx() can't handle.
 	 */
-	ret = ZSTD_findFrameCompressedSize(in_buf, in_len);
+	ret = zstd_find_frame_compressed_size(in_buf, in_len);
 	err = handle_zstd_error(ret, error);
 	if (err)
 		goto out;
 	in_len = (long)ret;
 
-	ret = ZSTD_decompressDCtx(dctx, out_buf, out_len, in_buf, in_len);
+	ret = zstd_decompress_dctx(dctx, out_buf, out_len, in_buf, in_len);
 	err = handle_zstd_error(ret, error);
 	if (err)
 		goto out;
@@ -167,14 +167,14 @@
 			 long *in_pos,
 			 void (*error)(char *x))
 {
-	ZSTD_inBuffer in;
-	ZSTD_outBuffer out;
-	ZSTD_frameParams params;
+	zstd_in_buffer in;
+	zstd_out_buffer out;
+	zstd_frame_header header;
 	void *in_allocated = NULL;
 	void *out_allocated = NULL;
 	void *wksp = NULL;
 	size_t wksp_size;
-	ZSTD_DStream *dstream;
+	zstd_dstream *dstream;
 	int err;
 	size_t ret;
 
@@ -238,13 +238,13 @@
 	out.size = out_len;
 
 	/*
-	 * We need to know the window size to allocate the ZSTD_DStream.
+	 * We need to know the window size to allocate the zstd_dstream.
 	 * Since we are streaming, we need to allocate a buffer for the sliding
 	 * window. The window size varies from 1 KB to ZSTD_WINDOWSIZE_MAX
 	 * (8 MB), so it is important to use the actual value so as not to
 	 * waste memory when it is smaller.
 	 */
-	ret = ZSTD_getFrameParams(&params, in.src, in.size);
+	ret = zstd_get_frame_header(&header, in.src, in.size);
 	err = handle_zstd_error(ret, error);
 	if (err)
 		goto out;
@@ -253,19 +253,19 @@
 		err = -1;
 		goto out;
 	}
-	if (params.windowSize > ZSTD_WINDOWSIZE_MAX) {
+	if (header.windowSize > ZSTD_WINDOWSIZE_MAX) {
 		error("ZSTD-compressed data has too large a window size");
 		err = -1;
 		goto out;
 	}
 
 	/*
-	 * Allocate the ZSTD_DStream now that we know how much memory is
+	 * Allocate the zstd_dstream now that we know how much memory is
 	 * required.
 	 */
-	wksp_size = ZSTD_DStreamWorkspaceBound(params.windowSize);
+	wksp_size = zstd_dstream_workspace_bound(header.windowSize);
 	wksp = large_malloc(wksp_size);
-	dstream = ZSTD_initDStream(params.windowSize, wksp, wksp_size);
+	dstream = zstd_init_dstream(header.windowSize, wksp, wksp_size);
 	if (dstream == NULL) {
 		error("Out of memory while allocating ZSTD_DStream");
 		err = -1;
@@ -298,7 +298,7 @@
 			in.size = in_len;
 		}
 		/* Returns zero when the frame is complete. */
-		ret = ZSTD_decompressStream(dstream, &out, &in);
+		ret = zstd_decompress_stream(dstream, &out, &in);
 		err = handle_zstd_error(ret, error);
 		if (err)
 			goto out;
diff --git a/lib/zstd/Makefile b/lib/zstd/Makefile
index f5d778e..65218ec 100644
--- a/lib/zstd/Makefile
+++ b/lib/zstd/Makefile
@@ -1,10 +1,46 @@
-# SPDX-License-Identifier: GPL-2.0-only
+# SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+# ################################################################
+# Copyright (c) Facebook, Inc.
+# All rights reserved.
+#
+# This source code is licensed under both the BSD-style license (found in the
+# LICENSE file in the root directory of this source tree) and the GPLv2 (found
+# in the COPYING file in the root directory of this source tree).
+# You may select, at your option, one of the above-listed licenses.
+# ################################################################
 obj-$(CONFIG_ZSTD_COMPRESS) += zstd_compress.o
 obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd_decompress.o
 
 ccflags-y += -O3
 
-zstd_compress-y := fse_compress.o huf_compress.o compress.o \
-		   entropy_common.o fse_decompress.o zstd_common.o
-zstd_decompress-y := huf_decompress.o decompress.o \
-		     entropy_common.o fse_decompress.o zstd_common.o
+zstd_compress-y := \
+		zstd_compress_module.o \
+		common/debug.o \
+		common/entropy_common.o \
+		common/error_private.o \
+		common/fse_decompress.o \
+		common/zstd_common.o \
+		compress/fse_compress.o \
+		compress/hist.o \
+		compress/huf_compress.o \
+		compress/zstd_compress.o \
+		compress/zstd_compress_literals.o \
+		compress/zstd_compress_sequences.o \
+		compress/zstd_compress_superblock.o \
+		compress/zstd_double_fast.o \
+		compress/zstd_fast.o \
+		compress/zstd_lazy.o \
+		compress/zstd_ldm.o \
+		compress/zstd_opt.o \
+
+zstd_decompress-y := \
+		zstd_decompress_module.o \
+		common/debug.o \
+		common/entropy_common.o \
+		common/error_private.o \
+		common/fse_decompress.o \
+		common/zstd_common.o \
+		decompress/huf_decompress.o \
+		decompress/zstd_ddict.o \
+		decompress/zstd_decompress.o \
+		decompress/zstd_decompress_block.o \
diff --git a/lib/zstd/bitstream.h b/lib/zstd/bitstream.h
deleted file mode 100644
index 5d6343c..0000000
--- a/lib/zstd/bitstream.h
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * bitstream
- * Part of FSE library
- * header file (to include)
- * Copyright (C) 2013-2016, Yann Collet.
- *
- * BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following disclaimer
- * in the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation. This program is dual-licensed; you may select
- * either version 2 of the GNU General Public License ("GPL") or BSD license
- * ("BSD").
- *
- * You can contact the author at :
- * - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
- */
-#ifndef BITSTREAM_H_MODULE
-#define BITSTREAM_H_MODULE
-
-/*
-*  This API consists of small unitary functions, which must be inlined for best performance.
-*  Since link-time-optimization is not available for all compilers,
-*  these functions are defined into a .h to be included.
-*/
-
-/*-****************************************
-*  Dependencies
-******************************************/
-#include "error_private.h" /* error codes and messages */
-#include "mem.h"	   /* unaligned access routines */
-
-/*=========================================
-*  Target specific
-=========================================*/
-#define STREAM_ACCUMULATOR_MIN_32 25
-#define STREAM_ACCUMULATOR_MIN_64 57
-#define STREAM_ACCUMULATOR_MIN ((U32)(ZSTD_32bits() ? STREAM_ACCUMULATOR_MIN_32 : STREAM_ACCUMULATOR_MIN_64))
-
-/*-******************************************
-*  bitStream encoding API (write forward)
-********************************************/
-/* bitStream can mix input from multiple sources.
-*  A critical property of these streams is that they encode and decode in **reverse** direction.
-*  So the first bit sequence you add will be the last to be read, like a LIFO stack.
-*/
-typedef struct {
-	size_t bitContainer;
-	int bitPos;
-	char *startPtr;
-	char *ptr;
-	char *endPtr;
-} BIT_CStream_t;
-
-ZSTD_STATIC size_t BIT_initCStream(BIT_CStream_t *bitC, void *dstBuffer, size_t dstCapacity);
-ZSTD_STATIC void BIT_addBits(BIT_CStream_t *bitC, size_t value, unsigned nbBits);
-ZSTD_STATIC void BIT_flushBits(BIT_CStream_t *bitC);
-ZSTD_STATIC size_t BIT_closeCStream(BIT_CStream_t *bitC);
-
-/* Start with initCStream, providing the size of buffer to write into.
-*  bitStream will never write outside of this buffer.
-*  `dstCapacity` must be >= sizeof(bitD->bitContainer), otherwise @return will be an error code.
-*
-*  bits are first added to a local register.
-*  Local register is size_t, hence 64-bits on 64-bits systems, or 32-bits on 32-bits systems.
-*  Writing data into memory is an explicit operation, performed by the flushBits function.
-*  Hence keep track how many bits are potentially stored into local register to avoid register overflow.
-*  After a flushBits, a maximum of 7 bits might still be stored into local register.
-*
-*  Avoid storing elements of more than 24 bits if you want compatibility with 32-bits bitstream readers.
-*
-*  Last operation is to close the bitStream.
-*  The function returns the final size of CStream in bytes.
-*  If data couldn't fit into `dstBuffer`, it will return a 0 ( == not storable)
-*/
-
-/*-********************************************
-*  bitStream decoding API (read backward)
-**********************************************/
-typedef struct {
-	size_t bitContainer;
-	unsigned bitsConsumed;
-	const char *ptr;
-	const char *start;
-} BIT_DStream_t;
-
-typedef enum {
-	BIT_DStream_unfinished = 0,
-	BIT_DStream_endOfBuffer = 1,
-	BIT_DStream_completed = 2,
-	BIT_DStream_overflow = 3
-} BIT_DStream_status; /* result of BIT_reloadDStream() */
-/* 1,2,4,8 would be better for bitmap combinations, but slows down performance a bit ... :( */
-
-ZSTD_STATIC size_t BIT_initDStream(BIT_DStream_t *bitD, const void *srcBuffer, size_t srcSize);
-ZSTD_STATIC size_t BIT_readBits(BIT_DStream_t *bitD, unsigned nbBits);
-ZSTD_STATIC BIT_DStream_status BIT_reloadDStream(BIT_DStream_t *bitD);
-ZSTD_STATIC unsigned BIT_endOfDStream(const BIT_DStream_t *bitD);
-
-/* Start by invoking BIT_initDStream().
-*  A chunk of the bitStream is then stored into a local register.
-*  Local register size is 64-bits on 64-bits systems, 32-bits on 32-bits systems (size_t).
-*  You can then retrieve bitFields stored into the local register, **in reverse order**.
-*  Local register is explicitly reloaded from memory by the BIT_reloadDStream() method.
-*  A reload guarantee a minimum of ((8*sizeof(bitD->bitContainer))-7) bits when its result is BIT_DStream_unfinished.
-*  Otherwise, it can be less than that, so proceed accordingly.
-*  Checking if DStream has reached its end can be performed with BIT_endOfDStream().
-*/
-
-/*-****************************************
-*  unsafe API
-******************************************/
-ZSTD_STATIC void BIT_addBitsFast(BIT_CStream_t *bitC, size_t value, unsigned nbBits);
-/* faster, but works only if value is "clean", meaning all high bits above nbBits are 0 */
-
-ZSTD_STATIC void BIT_flushBitsFast(BIT_CStream_t *bitC);
-/* unsafe version; does not check buffer overflow */
-
-ZSTD_STATIC size_t BIT_readBitsFast(BIT_DStream_t *bitD, unsigned nbBits);
-/* faster, but works only if nbBits >= 1 */
-
-/*-**************************************************************
-*  Internal functions
-****************************************************************/
-ZSTD_STATIC unsigned BIT_highbit32(register U32 val) { return 31 - __builtin_clz(val); }
-
-/*=====    Local Constants   =====*/
-static const unsigned BIT_mask[] = {0,       1,       3,       7,	0xF,      0x1F,     0x3F,     0x7F,      0xFF,
-				    0x1FF,   0x3FF,   0x7FF,   0xFFF,    0x1FFF,   0x3FFF,   0x7FFF,   0xFFFF,    0x1FFFF,
-				    0x3FFFF, 0x7FFFF, 0xFFFFF, 0x1FFFFF, 0x3FFFFF, 0x7FFFFF, 0xFFFFFF, 0x1FFFFFF, 0x3FFFFFF}; /* up to 26 bits */
-
-/*-**************************************************************
-*  bitStream encoding
-****************************************************************/
-/*! BIT_initCStream() :
- *  `dstCapacity` must be > sizeof(void*)
- *  @return : 0 if success,
-			  otherwise an error code (can be tested using ERR_isError() ) */
-ZSTD_STATIC size_t BIT_initCStream(BIT_CStream_t *bitC, void *startPtr, size_t dstCapacity)
-{
-	bitC->bitContainer = 0;
-	bitC->bitPos = 0;
-	bitC->startPtr = (char *)startPtr;
-	bitC->ptr = bitC->startPtr;
-	bitC->endPtr = bitC->startPtr + dstCapacity - sizeof(bitC->ptr);
-	if (dstCapacity <= sizeof(bitC->ptr))
-		return ERROR(dstSize_tooSmall);
-	return 0;
-}
-
-/*! BIT_addBits() :
-	can add up to 26 bits into `bitC`.
-	Does not check for register overflow ! */
-ZSTD_STATIC void BIT_addBits(BIT_CStream_t *bitC, size_t value, unsigned nbBits)
-{
-	bitC->bitContainer |= (value & BIT_mask[nbBits]) << bitC->bitPos;
-	bitC->bitPos += nbBits;
-}
-
-/*! BIT_addBitsFast() :
- *  works only if `value` is _clean_, meaning all high bits above nbBits are 0 */
-ZSTD_STATIC void BIT_addBitsFast(BIT_CStream_t *bitC, size_t value, unsigned nbBits)
-{
-	bitC->bitContainer |= value << bitC->bitPos;
-	bitC->bitPos += nbBits;
-}
-
-/*! BIT_flushBitsFast() :
- *  unsafe version; does not check buffer overflow */
-ZSTD_STATIC void BIT_flushBitsFast(BIT_CStream_t *bitC)
-{
-	size_t const nbBytes = bitC->bitPos >> 3;
-	ZSTD_writeLEST(bitC->ptr, bitC->bitContainer);
-	bitC->ptr += nbBytes;
-	bitC->bitPos &= 7;
-	bitC->bitContainer >>= nbBytes * 8; /* if bitPos >= sizeof(bitContainer)*8 --> undefined behavior */
-}
-
-/*! BIT_flushBits() :
- *  safe version; check for buffer overflow, and prevents it.
- *  note : does not signal buffer overflow. This will be revealed later on using BIT_closeCStream() */
-ZSTD_STATIC void BIT_flushBits(BIT_CStream_t *bitC)
-{
-	size_t const nbBytes = bitC->bitPos >> 3;
-	ZSTD_writeLEST(bitC->ptr, bitC->bitContainer);
-	bitC->ptr += nbBytes;
-	if (bitC->ptr > bitC->endPtr)
-		bitC->ptr = bitC->endPtr;
-	bitC->bitPos &= 7;
-	bitC->bitContainer >>= nbBytes * 8; /* if bitPos >= sizeof(bitContainer)*8 --> undefined behavior */
-}
-
-/*! BIT_closeCStream() :
- *  @return : size of CStream, in bytes,
-			  or 0 if it could not fit into dstBuffer */
-ZSTD_STATIC size_t BIT_closeCStream(BIT_CStream_t *bitC)
-{
-	BIT_addBitsFast(bitC, 1, 1); /* endMark */
-	BIT_flushBits(bitC);
-
-	if (bitC->ptr >= bitC->endPtr)
-		return 0; /* doesn't fit within authorized budget : cancel */
-
-	return (bitC->ptr - bitC->startPtr) + (bitC->bitPos > 0);
-}
-
-/*-********************************************************
-* bitStream decoding
-**********************************************************/
-/*! BIT_initDStream() :
-*   Initialize a BIT_DStream_t.
-*   `bitD` : a pointer to an already allocated BIT_DStream_t structure.
-*   `srcSize` must be the *exact* size of the bitStream, in bytes.
-*   @return : size of stream (== srcSize) or an errorCode if a problem is detected
-*/
-ZSTD_STATIC size_t BIT_initDStream(BIT_DStream_t *bitD, const void *srcBuffer, size_t srcSize)
-{
-	if (srcSize < 1) {
-		memset(bitD, 0, sizeof(*bitD));
-		return ERROR(srcSize_wrong);
-	}
-
-	if (srcSize >= sizeof(bitD->bitContainer)) { /* normal case */
-		bitD->start = (const char *)srcBuffer;
-		bitD->ptr = (const char *)srcBuffer + srcSize - sizeof(bitD->bitContainer);
-		bitD->bitContainer = ZSTD_readLEST(bitD->ptr);
-		{
-			BYTE const lastByte = ((const BYTE *)srcBuffer)[srcSize - 1];
-			bitD->bitsConsumed = lastByte ? 8 - BIT_highbit32(lastByte) : 0; /* ensures bitsConsumed is always set */
-			if (lastByte == 0)
-				return ERROR(GENERIC); /* endMark not present */
-		}
-	} else {
-		bitD->start = (const char *)srcBuffer;
-		bitD->ptr = bitD->start;
-		bitD->bitContainer = *(const BYTE *)(bitD->start);
-		switch (srcSize) {
-		case 7: bitD->bitContainer += (size_t)(((const BYTE *)(srcBuffer))[6]) << (sizeof(bitD->bitContainer) * 8 - 16);
-			fallthrough;
-		case 6: bitD->bitContainer += (size_t)(((const BYTE *)(srcBuffer))[5]) << (sizeof(bitD->bitContainer) * 8 - 24);
-			fallthrough;
-		case 5: bitD->bitContainer += (size_t)(((const BYTE *)(srcBuffer))[4]) << (sizeof(bitD->bitContainer) * 8 - 32);
-			fallthrough;
-		case 4: bitD->bitContainer += (size_t)(((const BYTE *)(srcBuffer))[3]) << 24;
-			fallthrough;
-		case 3: bitD->bitContainer += (size_t)(((const BYTE *)(srcBuffer))[2]) << 16;
-			fallthrough;
-		case 2: bitD->bitContainer += (size_t)(((const BYTE *)(srcBuffer))[1]) << 8;
-			fallthrough;
-		default:;
-		}
-		{
-			BYTE const lastByte = ((const BYTE *)srcBuffer)[srcSize - 1];
-			bitD->bitsConsumed = lastByte ? 8 - BIT_highbit32(lastByte) : 0;
-			if (lastByte == 0)
-				return ERROR(GENERIC); /* endMark not present */
-		}
-		bitD->bitsConsumed += (U32)(sizeof(bitD->bitContainer) - srcSize) * 8;
-	}
-
-	return srcSize;
-}
-
-ZSTD_STATIC size_t BIT_getUpperBits(size_t bitContainer, U32 const start) { return bitContainer >> start; }
-
-ZSTD_STATIC size_t BIT_getMiddleBits(size_t bitContainer, U32 const start, U32 const nbBits) { return (bitContainer >> start) & BIT_mask[nbBits]; }
-
-ZSTD_STATIC size_t BIT_getLowerBits(size_t bitContainer, U32 const nbBits) { return bitContainer & BIT_mask[nbBits]; }
-
-/*! BIT_lookBits() :
- *  Provides next n bits from local register.
- *  local register is not modified.
- *  On 32-bits, maxNbBits==24.
- *  On 64-bits, maxNbBits==56.
- *  @return : value extracted
- */
-ZSTD_STATIC size_t BIT_lookBits(const BIT_DStream_t *bitD, U32 nbBits)
-{
-	U32 const bitMask = sizeof(bitD->bitContainer) * 8 - 1;
-	return ((bitD->bitContainer << (bitD->bitsConsumed & bitMask)) >> 1) >> ((bitMask - nbBits) & bitMask);
-}
-
-/*! BIT_lookBitsFast() :
-*   unsafe version; only works only if nbBits >= 1 */
-ZSTD_STATIC size_t BIT_lookBitsFast(const BIT_DStream_t *bitD, U32 nbBits)
-{
-	U32 const bitMask = sizeof(bitD->bitContainer) * 8 - 1;
-	return (bitD->bitContainer << (bitD->bitsConsumed & bitMask)) >> (((bitMask + 1) - nbBits) & bitMask);
-}
-
-ZSTD_STATIC void BIT_skipBits(BIT_DStream_t *bitD, U32 nbBits) { bitD->bitsConsumed += nbBits; }
-
-/*! BIT_readBits() :
- *  Read (consume) next n bits from local register and update.
- *  Pay attention to not read more than nbBits contained into local register.
- *  @return : extracted value.
- */
-ZSTD_STATIC size_t BIT_readBits(BIT_DStream_t *bitD, U32 nbBits)
-{
-	size_t const value = BIT_lookBits(bitD, nbBits);
-	BIT_skipBits(bitD, nbBits);
-	return value;
-}
-
-/*! BIT_readBitsFast() :
-*   unsafe version; only works only if nbBits >= 1 */
-ZSTD_STATIC size_t BIT_readBitsFast(BIT_DStream_t *bitD, U32 nbBits)
-{
-	size_t const value = BIT_lookBitsFast(bitD, nbBits);
-	BIT_skipBits(bitD, nbBits);
-	return value;
-}
-
-/*! BIT_reloadDStream() :
-*   Refill `bitD` from buffer previously set in BIT_initDStream() .
-*   This function is safe, it guarantees it will not read beyond src buffer.
-*   @return : status of `BIT_DStream_t` internal register.
-			  if status == BIT_DStream_unfinished, internal register is filled with >= (sizeof(bitD->bitContainer)*8 - 7) bits */
-ZSTD_STATIC BIT_DStream_status BIT_reloadDStream(BIT_DStream_t *bitD)
-{
-	if (bitD->bitsConsumed > (sizeof(bitD->bitContainer) * 8)) /* should not happen => corruption detected */
-		return BIT_DStream_overflow;
-
-	if (bitD->ptr >= bitD->start + sizeof(bitD->bitContainer)) {
-		bitD->ptr -= bitD->bitsConsumed >> 3;
-		bitD->bitsConsumed &= 7;
-		bitD->bitContainer = ZSTD_readLEST(bitD->ptr);
-		return BIT_DStream_unfinished;
-	}
-	if (bitD->ptr == bitD->start) {
-		if (bitD->bitsConsumed < sizeof(bitD->bitContainer) * 8)
-			return BIT_DStream_endOfBuffer;
-		return BIT_DStream_completed;
-	}
-	{
-		U32 nbBytes = bitD->bitsConsumed >> 3;
-		BIT_DStream_status result = BIT_DStream_unfinished;
-		if (bitD->ptr - nbBytes < bitD->start) {
-			nbBytes = (U32)(bitD->ptr - bitD->start); /* ptr > start */
-			result = BIT_DStream_endOfBuffer;
-		}
-		bitD->ptr -= nbBytes;
-		bitD->bitsConsumed -= nbBytes * 8;
-		bitD->bitContainer = ZSTD_readLEST(bitD->ptr); /* reminder : srcSize > sizeof(bitD) */
-		return result;
-	}
-}
-
-/*! BIT_endOfDStream() :
-*   @return Tells if DStream has exactly reached its end (all bits consumed).
-*/
-ZSTD_STATIC unsigned BIT_endOfDStream(const BIT_DStream_t *DStream)
-{
-	return ((DStream->ptr == DStream->start) && (DStream->bitsConsumed == sizeof(DStream->bitContainer) * 8));
-}
-
-#endif /* BITSTREAM_H_MODULE */
diff --git a/lib/zstd/common/bitstream.h b/lib/zstd/common/bitstream.h
new file mode 100644
index 0000000..28248ab
--- /dev/null
+++ b/lib/zstd/common/bitstream.h
@@ -0,0 +1,437 @@
+/* ******************************************************************
+ * bitstream
+ * Part of FSE library
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ *
+ * You can contact the author at :
+ * - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+****************************************************************** */
+#ifndef BITSTREAM_H_MODULE
+#define BITSTREAM_H_MODULE
+
+/*
+*  This API consists of small unitary functions, which must be inlined for best performance.
+*  Since link-time-optimization is not available for all compilers,
+*  these functions are defined into a .h to be included.
+*/
+
+/*-****************************************
+*  Dependencies
+******************************************/
+#include "mem.h"            /* unaligned access routines */
+#include "compiler.h"       /* UNLIKELY() */
+#include "debug.h"          /* assert(), DEBUGLOG(), RAWLOG() */
+#include "error_private.h"  /* error codes and messages */
+
+
+/*=========================================
+*  Target specific
+=========================================*/
+
+#define STREAM_ACCUMULATOR_MIN_32  25
+#define STREAM_ACCUMULATOR_MIN_64  57
+#define STREAM_ACCUMULATOR_MIN    ((U32)(MEM_32bits() ? STREAM_ACCUMULATOR_MIN_32 : STREAM_ACCUMULATOR_MIN_64))
+
+
+/*-******************************************
+*  bitStream encoding API (write forward)
+********************************************/
+/* bitStream can mix input from multiple sources.
+ * A critical property of these streams is that they encode and decode in **reverse** direction.
+ * So the first bit sequence you add will be the last to be read, like a LIFO stack.
+ */
+typedef struct {
+    size_t bitContainer;
+    unsigned bitPos;
+    char*  startPtr;
+    char*  ptr;
+    char*  endPtr;
+} BIT_CStream_t;
+
+MEM_STATIC size_t BIT_initCStream(BIT_CStream_t* bitC, void* dstBuffer, size_t dstCapacity);
+MEM_STATIC void   BIT_addBits(BIT_CStream_t* bitC, size_t value, unsigned nbBits);
+MEM_STATIC void   BIT_flushBits(BIT_CStream_t* bitC);
+MEM_STATIC size_t BIT_closeCStream(BIT_CStream_t* bitC);
+
+/* Start with initCStream, providing the size of buffer to write into.
+*  bitStream will never write outside of this buffer.
+*  `dstCapacity` must be >= sizeof(bitD->bitContainer), otherwise @return will be an error code.
+*
+*  bits are first added to a local register.
+*  Local register is size_t, hence 64-bits on 64-bits systems, or 32-bits on 32-bits systems.
+*  Writing data into memory is an explicit operation, performed by the flushBits function.
+*  Hence keep track how many bits are potentially stored into local register to avoid register overflow.
+*  After a flushBits, a maximum of 7 bits might still be stored into local register.
+*
+*  Avoid storing elements of more than 24 bits if you want compatibility with 32-bits bitstream readers.
+*
+*  Last operation is to close the bitStream.
+*  The function returns the final size of CStream in bytes.
+*  If data couldn't fit into `dstBuffer`, it will return a 0 ( == not storable)
+*/
+
+
+/*-********************************************
+*  bitStream decoding API (read backward)
+**********************************************/
+typedef struct {
+    size_t   bitContainer;
+    unsigned bitsConsumed;
+    const char* ptr;
+    const char* start;
+    const char* limitPtr;
+} BIT_DStream_t;
+
+typedef enum { BIT_DStream_unfinished = 0,
+               BIT_DStream_endOfBuffer = 1,
+               BIT_DStream_completed = 2,
+               BIT_DStream_overflow = 3 } BIT_DStream_status;  /* result of BIT_reloadDStream() */
+               /* 1,2,4,8 would be better for bitmap combinations, but slows down performance a bit ... :( */
+
+MEM_STATIC size_t   BIT_initDStream(BIT_DStream_t* bitD, const void* srcBuffer, size_t srcSize);
+MEM_STATIC size_t   BIT_readBits(BIT_DStream_t* bitD, unsigned nbBits);
+MEM_STATIC BIT_DStream_status BIT_reloadDStream(BIT_DStream_t* bitD);
+MEM_STATIC unsigned BIT_endOfDStream(const BIT_DStream_t* bitD);
+
+
+/* Start by invoking BIT_initDStream().
+*  A chunk of the bitStream is then stored into a local register.
+*  Local register size is 64-bits on 64-bits systems, 32-bits on 32-bits systems (size_t).
+*  You can then retrieve bitFields stored into the local register, **in reverse order**.
+*  Local register is explicitly reloaded from memory by the BIT_reloadDStream() method.
+*  A reload guarantee a minimum of ((8*sizeof(bitD->bitContainer))-7) bits when its result is BIT_DStream_unfinished.
+*  Otherwise, it can be less than that, so proceed accordingly.
+*  Checking if DStream has reached its end can be performed with BIT_endOfDStream().
+*/
+
+
+/*-****************************************
+*  unsafe API
+******************************************/
+MEM_STATIC void BIT_addBitsFast(BIT_CStream_t* bitC, size_t value, unsigned nbBits);
+/* faster, but works only if value is "clean", meaning all high bits above nbBits are 0 */
+
+MEM_STATIC void BIT_flushBitsFast(BIT_CStream_t* bitC);
+/* unsafe version; does not check buffer overflow */
+
+MEM_STATIC size_t BIT_readBitsFast(BIT_DStream_t* bitD, unsigned nbBits);
+/* faster, but works only if nbBits >= 1 */
+
+
+
+/*-**************************************************************
+*  Internal functions
+****************************************************************/
+MEM_STATIC unsigned BIT_highbit32 (U32 val)
+{
+    assert(val != 0);
+    {
+#   if (__GNUC__ >= 3)   /* Use GCC Intrinsic */
+        return __builtin_clz (val) ^ 31;
+#   else   /* Software version */
+        static const unsigned DeBruijnClz[32] = { 0,  9,  1, 10, 13, 21,  2, 29,
+                                                 11, 14, 16, 18, 22, 25,  3, 30,
+                                                  8, 12, 20, 28, 15, 17, 24,  7,
+                                                 19, 27, 23,  6, 26,  5,  4, 31 };
+        U32 v = val;
+        v |= v >> 1;
+        v |= v >> 2;
+        v |= v >> 4;
+        v |= v >> 8;
+        v |= v >> 16;
+        return DeBruijnClz[ (U32) (v * 0x07C4ACDDU) >> 27];
+#   endif
+    }
+}
+
+/*=====    Local Constants   =====*/
+static const unsigned BIT_mask[] = {
+    0,          1,         3,         7,         0xF,       0x1F,
+    0x3F,       0x7F,      0xFF,      0x1FF,     0x3FF,     0x7FF,
+    0xFFF,      0x1FFF,    0x3FFF,    0x7FFF,    0xFFFF,    0x1FFFF,
+    0x3FFFF,    0x7FFFF,   0xFFFFF,   0x1FFFFF,  0x3FFFFF,  0x7FFFFF,
+    0xFFFFFF,   0x1FFFFFF, 0x3FFFFFF, 0x7FFFFFF, 0xFFFFFFF, 0x1FFFFFFF,
+    0x3FFFFFFF, 0x7FFFFFFF}; /* up to 31 bits */
+#define BIT_MASK_SIZE (sizeof(BIT_mask) / sizeof(BIT_mask[0]))
+
+/*-**************************************************************
+*  bitStream encoding
+****************************************************************/
+/*! BIT_initCStream() :
+ *  `dstCapacity` must be > sizeof(size_t)
+ *  @return : 0 if success,
+ *            otherwise an error code (can be tested using ERR_isError()) */
+MEM_STATIC size_t BIT_initCStream(BIT_CStream_t* bitC,
+                                  void* startPtr, size_t dstCapacity)
+{
+    bitC->bitContainer = 0;
+    bitC->bitPos = 0;
+    bitC->startPtr = (char*)startPtr;
+    bitC->ptr = bitC->startPtr;
+    bitC->endPtr = bitC->startPtr + dstCapacity - sizeof(bitC->bitContainer);
+    if (dstCapacity <= sizeof(bitC->bitContainer)) return ERROR(dstSize_tooSmall);
+    return 0;
+}
+
+/*! BIT_addBits() :
+ *  can add up to 31 bits into `bitC`.
+ *  Note : does not check for register overflow ! */
+MEM_STATIC void BIT_addBits(BIT_CStream_t* bitC,
+                            size_t value, unsigned nbBits)
+{
+    DEBUG_STATIC_ASSERT(BIT_MASK_SIZE == 32);
+    assert(nbBits < BIT_MASK_SIZE);
+    assert(nbBits + bitC->bitPos < sizeof(bitC->bitContainer) * 8);
+    bitC->bitContainer |= (value & BIT_mask[nbBits]) << bitC->bitPos;
+    bitC->bitPos += nbBits;
+}
+
+/*! BIT_addBitsFast() :
+ *  works only if `value` is _clean_,
+ *  meaning all high bits above nbBits are 0 */
+MEM_STATIC void BIT_addBitsFast(BIT_CStream_t* bitC,
+                                size_t value, unsigned nbBits)
+{
+    assert((value>>nbBits) == 0);
+    assert(nbBits + bitC->bitPos < sizeof(bitC->bitContainer) * 8);
+    bitC->bitContainer |= value << bitC->bitPos;
+    bitC->bitPos += nbBits;
+}
+
+/*! BIT_flushBitsFast() :
+ *  assumption : bitContainer has not overflowed
+ *  unsafe version; does not check buffer overflow */
+MEM_STATIC void BIT_flushBitsFast(BIT_CStream_t* bitC)
+{
+    size_t const nbBytes = bitC->bitPos >> 3;
+    assert(bitC->bitPos < sizeof(bitC->bitContainer) * 8);
+    assert(bitC->ptr <= bitC->endPtr);
+    MEM_writeLEST(bitC->ptr, bitC->bitContainer);
+    bitC->ptr += nbBytes;
+    bitC->bitPos &= 7;
+    bitC->bitContainer >>= nbBytes*8;
+}
+
+/*! BIT_flushBits() :
+ *  assumption : bitContainer has not overflowed
+ *  safe version; check for buffer overflow, and prevents it.
+ *  note : does not signal buffer overflow.
+ *  overflow will be revealed later on using BIT_closeCStream() */
+MEM_STATIC void BIT_flushBits(BIT_CStream_t* bitC)
+{
+    size_t const nbBytes = bitC->bitPos >> 3;
+    assert(bitC->bitPos < sizeof(bitC->bitContainer) * 8);
+    assert(bitC->ptr <= bitC->endPtr);
+    MEM_writeLEST(bitC->ptr, bitC->bitContainer);
+    bitC->ptr += nbBytes;
+    if (bitC->ptr > bitC->endPtr) bitC->ptr = bitC->endPtr;
+    bitC->bitPos &= 7;
+    bitC->bitContainer >>= nbBytes*8;
+}
+
+/*! BIT_closeCStream() :
+ *  @return : size of CStream, in bytes,
+ *            or 0 if it could not fit into dstBuffer */
+MEM_STATIC size_t BIT_closeCStream(BIT_CStream_t* bitC)
+{
+    BIT_addBitsFast(bitC, 1, 1);   /* endMark */
+    BIT_flushBits(bitC);
+    if (bitC->ptr >= bitC->endPtr) return 0; /* overflow detected */
+    return (bitC->ptr - bitC->startPtr) + (bitC->bitPos > 0);
+}
+
+
+/*-********************************************************
+*  bitStream decoding
+**********************************************************/
+/*! BIT_initDStream() :
+ *  Initialize a BIT_DStream_t.
+ * `bitD` : a pointer to an already allocated BIT_DStream_t structure.
+ * `srcSize` must be the *exact* size of the bitStream, in bytes.
+ * @return : size of stream (== srcSize), or an errorCode if a problem is detected
+ */
+MEM_STATIC size_t BIT_initDStream(BIT_DStream_t* bitD, const void* srcBuffer, size_t srcSize)
+{
+    if (srcSize < 1) { ZSTD_memset(bitD, 0, sizeof(*bitD)); return ERROR(srcSize_wrong); }
+
+    bitD->start = (const char*)srcBuffer;
+    bitD->limitPtr = bitD->start + sizeof(bitD->bitContainer);
+
+    if (srcSize >=  sizeof(bitD->bitContainer)) {  /* normal case */
+        bitD->ptr   = (const char*)srcBuffer + srcSize - sizeof(bitD->bitContainer);
+        bitD->bitContainer = MEM_readLEST(bitD->ptr);
+        { BYTE const lastByte = ((const BYTE*)srcBuffer)[srcSize-1];
+          bitD->bitsConsumed = lastByte ? 8 - BIT_highbit32(lastByte) : 0;  /* ensures bitsConsumed is always set */
+          if (lastByte == 0) return ERROR(GENERIC); /* endMark not present */ }
+    } else {
+        bitD->ptr   = bitD->start;
+        bitD->bitContainer = *(const BYTE*)(bitD->start);
+        switch(srcSize)
+        {
+        case 7: bitD->bitContainer += (size_t)(((const BYTE*)(srcBuffer))[6]) << (sizeof(bitD->bitContainer)*8 - 16);
+                ZSTD_FALLTHROUGH;
+
+        case 6: bitD->bitContainer += (size_t)(((const BYTE*)(srcBuffer))[5]) << (sizeof(bitD->bitContainer)*8 - 24);
+                ZSTD_FALLTHROUGH;
+
+        case 5: bitD->bitContainer += (size_t)(((const BYTE*)(srcBuffer))[4]) << (sizeof(bitD->bitContainer)*8 - 32);
+                ZSTD_FALLTHROUGH;
+
+        case 4: bitD->bitContainer += (size_t)(((const BYTE*)(srcBuffer))[3]) << 24;
+                ZSTD_FALLTHROUGH;
+
+        case 3: bitD->bitContainer += (size_t)(((const BYTE*)(srcBuffer))[2]) << 16;
+                ZSTD_FALLTHROUGH;
+
+        case 2: bitD->bitContainer += (size_t)(((const BYTE*)(srcBuffer))[1]) <<  8;
+                ZSTD_FALLTHROUGH;
+
+        default: break;
+        }
+        {   BYTE const lastByte = ((const BYTE*)srcBuffer)[srcSize-1];
+            bitD->bitsConsumed = lastByte ? 8 - BIT_highbit32(lastByte) : 0;
+            if (lastByte == 0) return ERROR(corruption_detected);  /* endMark not present */
+        }
+        bitD->bitsConsumed += (U32)(sizeof(bitD->bitContainer) - srcSize)*8;
+    }
+
+    return srcSize;
+}
+
+MEM_STATIC FORCE_INLINE_ATTR size_t BIT_getUpperBits(size_t bitContainer, U32 const start)
+{
+    return bitContainer >> start;
+}
+
+MEM_STATIC FORCE_INLINE_ATTR size_t BIT_getMiddleBits(size_t bitContainer, U32 const start, U32 const nbBits)
+{
+    U32 const regMask = sizeof(bitContainer)*8 - 1;
+    /* if start > regMask, bitstream is corrupted, and result is undefined */
+    assert(nbBits < BIT_MASK_SIZE);
+    return (bitContainer >> (start & regMask)) & BIT_mask[nbBits];
+}
+
+MEM_STATIC FORCE_INLINE_ATTR size_t BIT_getLowerBits(size_t bitContainer, U32 const nbBits)
+{
+    assert(nbBits < BIT_MASK_SIZE);
+    return bitContainer & BIT_mask[nbBits];
+}
+
+/*! BIT_lookBits() :
+ *  Provides next n bits from local register.
+ *  local register is not modified.
+ *  On 32-bits, maxNbBits==24.
+ *  On 64-bits, maxNbBits==56.
+ * @return : value extracted */
+MEM_STATIC  FORCE_INLINE_ATTR size_t BIT_lookBits(const BIT_DStream_t*  bitD, U32 nbBits)
+{
+    /* arbitrate between double-shift and shift+mask */
+#if 1
+    /* if bitD->bitsConsumed + nbBits > sizeof(bitD->bitContainer)*8,
+     * bitstream is likely corrupted, and result is undefined */
+    return BIT_getMiddleBits(bitD->bitContainer, (sizeof(bitD->bitContainer)*8) - bitD->bitsConsumed - nbBits, nbBits);
+#else
+    /* this code path is slower on my os-x laptop */
+    U32 const regMask = sizeof(bitD->bitContainer)*8 - 1;
+    return ((bitD->bitContainer << (bitD->bitsConsumed & regMask)) >> 1) >> ((regMask-nbBits) & regMask);
+#endif
+}
+
+/*! BIT_lookBitsFast() :
+ *  unsafe version; only works if nbBits >= 1 */
+MEM_STATIC size_t BIT_lookBitsFast(const BIT_DStream_t* bitD, U32 nbBits)
+{
+    U32 const regMask = sizeof(bitD->bitContainer)*8 - 1;
+    assert(nbBits >= 1);
+    return (bitD->bitContainer << (bitD->bitsConsumed & regMask)) >> (((regMask+1)-nbBits) & regMask);
+}
+
+MEM_STATIC FORCE_INLINE_ATTR void BIT_skipBits(BIT_DStream_t* bitD, U32 nbBits)
+{
+    bitD->bitsConsumed += nbBits;
+}
+
+/*! BIT_readBits() :
+ *  Read (consume) next n bits from local register and update.
+ *  Pay attention to not read more than nbBits contained into local register.
+ * @return : extracted value. */
+MEM_STATIC FORCE_INLINE_ATTR size_t BIT_readBits(BIT_DStream_t* bitD, unsigned nbBits)
+{
+    size_t const value = BIT_lookBits(bitD, nbBits);
+    BIT_skipBits(bitD, nbBits);
+    return value;
+}
+
+/*! BIT_readBitsFast() :
+ *  unsafe version; only works only if nbBits >= 1 */
+MEM_STATIC size_t BIT_readBitsFast(BIT_DStream_t* bitD, unsigned nbBits)
+{
+    size_t const value = BIT_lookBitsFast(bitD, nbBits);
+    assert(nbBits >= 1);
+    BIT_skipBits(bitD, nbBits);
+    return value;
+}
+
+/*! BIT_reloadDStreamFast() :
+ *  Similar to BIT_reloadDStream(), but with two differences:
+ *  1. bitsConsumed <= sizeof(bitD->bitContainer)*8 must hold!
+ *  2. Returns BIT_DStream_overflow when bitD->ptr < bitD->limitPtr, at this
+ *     point you must use BIT_reloadDStream() to reload.
+ */
+MEM_STATIC BIT_DStream_status BIT_reloadDStreamFast(BIT_DStream_t* bitD)
+{
+    if (UNLIKELY(bitD->ptr < bitD->limitPtr))
+        return BIT_DStream_overflow;
+    assert(bitD->bitsConsumed <= sizeof(bitD->bitContainer)*8);
+    bitD->ptr -= bitD->bitsConsumed >> 3;
+    bitD->bitsConsumed &= 7;
+    bitD->bitContainer = MEM_readLEST(bitD->ptr);
+    return BIT_DStream_unfinished;
+}
+
+/*! BIT_reloadDStream() :
+ *  Refill `bitD` from buffer previously set in BIT_initDStream() .
+ *  This function is safe, it guarantees it will not read beyond src buffer.
+ * @return : status of `BIT_DStream_t` internal register.
+ *           when status == BIT_DStream_unfinished, internal register is filled with at least 25 or 57 bits */
+MEM_STATIC BIT_DStream_status BIT_reloadDStream(BIT_DStream_t* bitD)
+{
+    if (bitD->bitsConsumed > (sizeof(bitD->bitContainer)*8))  /* overflow detected, like end of stream */
+        return BIT_DStream_overflow;
+
+    if (bitD->ptr >= bitD->limitPtr) {
+        return BIT_reloadDStreamFast(bitD);
+    }
+    if (bitD->ptr == bitD->start) {
+        if (bitD->bitsConsumed < sizeof(bitD->bitContainer)*8) return BIT_DStream_endOfBuffer;
+        return BIT_DStream_completed;
+    }
+    /* start < ptr < limitPtr */
+    {   U32 nbBytes = bitD->bitsConsumed >> 3;
+        BIT_DStream_status result = BIT_DStream_unfinished;
+        if (bitD->ptr - nbBytes < bitD->start) {
+            nbBytes = (U32)(bitD->ptr - bitD->start);  /* ptr > start */
+            result = BIT_DStream_endOfBuffer;
+        }
+        bitD->ptr -= nbBytes;
+        bitD->bitsConsumed -= nbBytes*8;
+        bitD->bitContainer = MEM_readLEST(bitD->ptr);   /* reminder : srcSize > sizeof(bitD->bitContainer), otherwise bitD->ptr == bitD->start */
+        return result;
+    }
+}
+
+/*! BIT_endOfDStream() :
+ * @return : 1 if DStream has _exactly_ reached its end (all bits consumed).
+ */
+MEM_STATIC unsigned BIT_endOfDStream(const BIT_DStream_t* DStream)
+{
+    return ((DStream->ptr == DStream->start) && (DStream->bitsConsumed == sizeof(DStream->bitContainer)*8));
+}
+
+
+#endif /* BITSTREAM_H_MODULE */
diff --git a/lib/zstd/common/compiler.h b/lib/zstd/common/compiler.h
new file mode 100644
index 0000000..a1a051e
--- /dev/null
+++ b/lib/zstd/common/compiler.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_COMPILER_H
+#define ZSTD_COMPILER_H
+
+/*-*******************************************************
+*  Compiler specifics
+*********************************************************/
+/* force inlining */
+
+#if (defined(__GNUC__) && !defined(__STRICT_ANSI__)) || defined(__cplusplus) || defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L   /* C99 */
+#  define INLINE_KEYWORD inline
+#else
+#  define INLINE_KEYWORD
+#endif
+
+#define FORCE_INLINE_ATTR __attribute__((always_inline))
+
+
+/*
+  On MSVC qsort requires that functions passed into it use the __cdecl calling conversion(CC).
+  This explictly marks such functions as __cdecl so that the code will still compile
+  if a CC other than __cdecl has been made the default.
+*/
+#define WIN_CDECL
+
+/*
+ * FORCE_INLINE_TEMPLATE is used to define C "templates", which take constant
+ * parameters. They must be inlined for the compiler to eliminate the constant
+ * branches.
+ */
+#define FORCE_INLINE_TEMPLATE static INLINE_KEYWORD FORCE_INLINE_ATTR
+/*
+ * HINT_INLINE is used to help the compiler generate better code. It is *not*
+ * used for "templates", so it can be tweaked based on the compilers
+ * performance.
+ *
+ * gcc-4.8 and gcc-4.9 have been shown to benefit from leaving off the
+ * always_inline attribute.
+ *
+ * clang up to 5.0.0 (trunk) benefit tremendously from the always_inline
+ * attribute.
+ */
+#if !defined(__clang__) && defined(__GNUC__) && __GNUC__ >= 4 && __GNUC_MINOR__ >= 8 && __GNUC__ < 5
+#  define HINT_INLINE static INLINE_KEYWORD
+#else
+#  define HINT_INLINE static INLINE_KEYWORD FORCE_INLINE_ATTR
+#endif
+
+/* UNUSED_ATTR tells the compiler it is okay if the function is unused. */
+#define UNUSED_ATTR __attribute__((unused))
+
+/* force no inlining */
+#define FORCE_NOINLINE static __attribute__((__noinline__))
+
+
+/* target attribute */
+#ifndef __has_attribute
+  #define __has_attribute(x) 0  /* Compatibility with non-clang compilers. */
+#endif
+#define TARGET_ATTRIBUTE(target) __attribute__((__target__(target)))
+
+/* Enable runtime BMI2 dispatch based on the CPU.
+ * Enabled for clang & gcc >=4.8 on x86 when BMI2 isn't enabled by default.
+ */
+#ifndef DYNAMIC_BMI2
+  #if ((defined(__clang__) && __has_attribute(__target__)) \
+      || (defined(__GNUC__) \
+          && (__GNUC__ >= 5 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)))) \
+      && (defined(__x86_64__) || defined(_M_X86)) \
+      && !defined(__BMI2__)
+  #  define DYNAMIC_BMI2 1
+  #else
+  #  define DYNAMIC_BMI2 0
+  #endif
+#endif
+
+/* prefetch
+ * can be disabled, by declaring NO_PREFETCH build macro */
+#if ( (__GNUC__ >= 4) || ( (__GNUC__ == 3) && (__GNUC_MINOR__ >= 1) ) )
+#  define PREFETCH_L1(ptr)  __builtin_prefetch((ptr), 0 /* rw==read */, 3 /* locality */)
+#  define PREFETCH_L2(ptr)  __builtin_prefetch((ptr), 0 /* rw==read */, 2 /* locality */)
+#elif defined(__aarch64__)
+#  define PREFETCH_L1(ptr)  __asm__ __volatile__("prfm pldl1keep, %0" ::"Q"(*(ptr)))
+#  define PREFETCH_L2(ptr)  __asm__ __volatile__("prfm pldl2keep, %0" ::"Q"(*(ptr)))
+#else
+#  define PREFETCH_L1(ptr) (void)(ptr)  /* disabled */
+#  define PREFETCH_L2(ptr) (void)(ptr)  /* disabled */
+#endif  /* NO_PREFETCH */
+
+#define CACHELINE_SIZE 64
+
+#define PREFETCH_AREA(p, s)  {            \
+    const char* const _ptr = (const char*)(p);  \
+    size_t const _size = (size_t)(s);     \
+    size_t _pos;                          \
+    for (_pos=0; _pos<_size; _pos+=CACHELINE_SIZE) {  \
+        PREFETCH_L2(_ptr + _pos);         \
+    }                                     \
+}
+
+/* vectorization
+ * older GCC (pre gcc-4.3 picked as the cutoff) uses a different syntax */
+#if !defined(__INTEL_COMPILER) && !defined(__clang__) && defined(__GNUC__)
+#  if (__GNUC__ == 4 && __GNUC_MINOR__ > 3) || (__GNUC__ >= 5)
+#    define DONT_VECTORIZE __attribute__((optimize("no-tree-vectorize")))
+#  else
+#    define DONT_VECTORIZE _Pragma("GCC optimize(\"no-tree-vectorize\")")
+#  endif
+#else
+#  define DONT_VECTORIZE
+#endif
+
+/* Tell the compiler that a branch is likely or unlikely.
+ * Only use these macros if it causes the compiler to generate better code.
+ * If you can remove a LIKELY/UNLIKELY annotation without speed changes in gcc
+ * and clang, please do.
+ */
+#define LIKELY(x) (__builtin_expect((x), 1))
+#define UNLIKELY(x) (__builtin_expect((x), 0))
+
+/* disable warnings */
+
+/*Like DYNAMIC_BMI2 but for compile time determination of BMI2 support*/
+
+
+/* compat. with non-clang compilers */
+#ifndef __has_builtin
+#  define __has_builtin(x) 0
+#endif
+
+/* compat. with non-clang compilers */
+#ifndef __has_feature
+#  define __has_feature(x) 0
+#endif
+
+/* C-language Attributes are added in C23. */
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ > 201710L) && defined(__has_c_attribute)
+# define ZSTD_HAS_C_ATTRIBUTE(x) __has_c_attribute(x)
+#else
+# define ZSTD_HAS_C_ATTRIBUTE(x) 0
+#endif
+
+/* Only use C++ attributes in C++. Some compilers report support for C++
+ * attributes when compiling with C.
+ */
+#define ZSTD_HAS_CPP_ATTRIBUTE(x) 0
+
+/* Define ZSTD_FALLTHROUGH macro for annotating switch case with the 'fallthrough' attribute.
+ * - C23: https://en.cppreference.com/w/c/language/attributes/fallthrough
+ * - CPP17: https://en.cppreference.com/w/cpp/language/attributes/fallthrough
+ * - Else: __attribute__((__fallthrough__))
+ */
+#define ZSTD_FALLTHROUGH fallthrough
+
+/* detects whether we are being compiled under msan */
+
+
+/* detects whether we are being compiled under asan */
+
+
+#endif /* ZSTD_COMPILER_H */
diff --git a/lib/zstd/common/cpu.h b/lib/zstd/common/cpu.h
new file mode 100644
index 0000000..0db7b42
--- /dev/null
+++ b/lib/zstd/common/cpu.h
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_COMMON_CPU_H
+#define ZSTD_COMMON_CPU_H
+
+/*
+ * Implementation taken from folly/CpuId.h
+ * https://github.com/facebook/folly/blob/master/folly/CpuId.h
+ */
+
+#include "mem.h"
+
+
+typedef struct {
+    U32 f1c;
+    U32 f1d;
+    U32 f7b;
+    U32 f7c;
+} ZSTD_cpuid_t;
+
+MEM_STATIC ZSTD_cpuid_t ZSTD_cpuid(void) {
+    U32 f1c = 0;
+    U32 f1d = 0;
+    U32 f7b = 0;
+    U32 f7c = 0;
+#if defined(__i386__) && defined(__PIC__) && !defined(__clang__) && defined(__GNUC__)
+    /* The following block like the normal cpuid branch below, but gcc
+     * reserves ebx for use of its pic register so we must specially
+     * handle the save and restore to avoid clobbering the register
+     */
+    U32 n;
+    __asm__(
+        "pushl %%ebx\n\t"
+        "cpuid\n\t"
+        "popl %%ebx\n\t"
+        : "=a"(n)
+        : "a"(0)
+        : "ecx", "edx");
+    if (n >= 1) {
+      U32 f1a;
+      __asm__(
+          "pushl %%ebx\n\t"
+          "cpuid\n\t"
+          "popl %%ebx\n\t"
+          : "=a"(f1a), "=c"(f1c), "=d"(f1d)
+          : "a"(1));
+    }
+    if (n >= 7) {
+      __asm__(
+          "pushl %%ebx\n\t"
+          "cpuid\n\t"
+          "movl %%ebx, %%eax\n\t"
+          "popl %%ebx"
+          : "=a"(f7b), "=c"(f7c)
+          : "a"(7), "c"(0)
+          : "edx");
+    }
+#elif defined(__x86_64__) || defined(_M_X64) || defined(__i386__)
+    U32 n;
+    __asm__("cpuid" : "=a"(n) : "a"(0) : "ebx", "ecx", "edx");
+    if (n >= 1) {
+      U32 f1a;
+      __asm__("cpuid" : "=a"(f1a), "=c"(f1c), "=d"(f1d) : "a"(1) : "ebx");
+    }
+    if (n >= 7) {
+      U32 f7a;
+      __asm__("cpuid"
+              : "=a"(f7a), "=b"(f7b), "=c"(f7c)
+              : "a"(7), "c"(0)
+              : "edx");
+    }
+#endif
+    {
+        ZSTD_cpuid_t cpuid;
+        cpuid.f1c = f1c;
+        cpuid.f1d = f1d;
+        cpuid.f7b = f7b;
+        cpuid.f7c = f7c;
+        return cpuid;
+    }
+}
+
+#define X(name, r, bit)                                                        \
+  MEM_STATIC int ZSTD_cpuid_##name(ZSTD_cpuid_t const cpuid) {                 \
+    return ((cpuid.r) & (1U << bit)) != 0;                                     \
+  }
+
+/* cpuid(1): Processor Info and Feature Bits. */
+#define C(name, bit) X(name, f1c, bit)
+  C(sse3, 0)
+  C(pclmuldq, 1)
+  C(dtes64, 2)
+  C(monitor, 3)
+  C(dscpl, 4)
+  C(vmx, 5)
+  C(smx, 6)
+  C(eist, 7)
+  C(tm2, 8)
+  C(ssse3, 9)
+  C(cnxtid, 10)
+  C(fma, 12)
+  C(cx16, 13)
+  C(xtpr, 14)
+  C(pdcm, 15)
+  C(pcid, 17)
+  C(dca, 18)
+  C(sse41, 19)
+  C(sse42, 20)
+  C(x2apic, 21)
+  C(movbe, 22)
+  C(popcnt, 23)
+  C(tscdeadline, 24)
+  C(aes, 25)
+  C(xsave, 26)
+  C(osxsave, 27)
+  C(avx, 28)
+  C(f16c, 29)
+  C(rdrand, 30)
+#undef C
+#define D(name, bit) X(name, f1d, bit)
+  D(fpu, 0)
+  D(vme, 1)
+  D(de, 2)
+  D(pse, 3)
+  D(tsc, 4)
+  D(msr, 5)
+  D(pae, 6)
+  D(mce, 7)
+  D(cx8, 8)
+  D(apic, 9)
+  D(sep, 11)
+  D(mtrr, 12)
+  D(pge, 13)
+  D(mca, 14)
+  D(cmov, 15)
+  D(pat, 16)
+  D(pse36, 17)
+  D(psn, 18)
+  D(clfsh, 19)
+  D(ds, 21)
+  D(acpi, 22)
+  D(mmx, 23)
+  D(fxsr, 24)
+  D(sse, 25)
+  D(sse2, 26)
+  D(ss, 27)
+  D(htt, 28)
+  D(tm, 29)
+  D(pbe, 31)
+#undef D
+
+/* cpuid(7): Extended Features. */
+#define B(name, bit) X(name, f7b, bit)
+  B(bmi1, 3)
+  B(hle, 4)
+  B(avx2, 5)
+  B(smep, 7)
+  B(bmi2, 8)
+  B(erms, 9)
+  B(invpcid, 10)
+  B(rtm, 11)
+  B(mpx, 14)
+  B(avx512f, 16)
+  B(avx512dq, 17)
+  B(rdseed, 18)
+  B(adx, 19)
+  B(smap, 20)
+  B(avx512ifma, 21)
+  B(pcommit, 22)
+  B(clflushopt, 23)
+  B(clwb, 24)
+  B(avx512pf, 26)
+  B(avx512er, 27)
+  B(avx512cd, 28)
+  B(sha, 29)
+  B(avx512bw, 30)
+  B(avx512vl, 31)
+#undef B
+#define C(name, bit) X(name, f7c, bit)
+  C(prefetchwt1, 0)
+  C(avx512vbmi, 1)
+#undef C
+
+#undef X
+
+#endif /* ZSTD_COMMON_CPU_H */
diff --git a/lib/zstd/common/debug.c b/lib/zstd/common/debug.c
new file mode 100644
index 0000000..bb863c9
--- /dev/null
+++ b/lib/zstd/common/debug.c
@@ -0,0 +1,24 @@
+/* ******************************************************************
+ * debug
+ * Part of FSE library
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ *
+ * You can contact the author at :
+ * - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+****************************************************************** */
+
+
+/*
+ * This module only hosts one global variable
+ * which can be used to dynamically influence the verbosity of traces,
+ * such as DEBUGLOG and RAWLOG
+ */
+
+#include "debug.h"
+
+int g_debuglevel = DEBUGLEVEL;
diff --git a/lib/zstd/common/debug.h b/lib/zstd/common/debug.h
new file mode 100644
index 0000000..6dd88d1
--- /dev/null
+++ b/lib/zstd/common/debug.h
@@ -0,0 +1,101 @@
+/* ******************************************************************
+ * debug
+ * Part of FSE library
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ *
+ * You can contact the author at :
+ * - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+****************************************************************** */
+
+
+/*
+ * The purpose of this header is to enable debug functions.
+ * They regroup assert(), DEBUGLOG() and RAWLOG() for run-time,
+ * and DEBUG_STATIC_ASSERT() for compile-time.
+ *
+ * By default, DEBUGLEVEL==0, which means run-time debug is disabled.
+ *
+ * Level 1 enables assert() only.
+ * Starting level 2, traces can be generated and pushed to stderr.
+ * The higher the level, the more verbose the traces.
+ *
+ * It's possible to dynamically adjust level using variable g_debug_level,
+ * which is only declared if DEBUGLEVEL>=2,
+ * and is a global variable, not multi-thread protected (use with care)
+ */
+
+#ifndef DEBUG_H_12987983217
+#define DEBUG_H_12987983217
+
+
+
+/* static assert is triggered at compile time, leaving no runtime artefact.
+ * static assert only works with compile-time constants.
+ * Also, this variant can only be used inside a function. */
+#define DEBUG_STATIC_ASSERT(c) (void)sizeof(char[(c) ? 1 : -1])
+
+
+/* DEBUGLEVEL is expected to be defined externally,
+ * typically through compiler command line.
+ * Value must be a number. */
+#ifndef DEBUGLEVEL
+#  define DEBUGLEVEL 0
+#endif
+
+
+/* recommended values for DEBUGLEVEL :
+ * 0 : release mode, no debug, all run-time checks disabled
+ * 1 : enables assert() only, no display
+ * 2 : reserved, for currently active debug path
+ * 3 : events once per object lifetime (CCtx, CDict, etc.)
+ * 4 : events once per frame
+ * 5 : events once per block
+ * 6 : events once per sequence (verbose)
+ * 7+: events at every position (*very* verbose)
+ *
+ * It's generally inconvenient to output traces > 5.
+ * In which case, it's possible to selectively trigger high verbosity levels
+ * by modifying g_debug_level.
+ */
+
+#if (DEBUGLEVEL>=1)
+#  define ZSTD_DEPS_NEED_ASSERT
+#  include "zstd_deps.h"
+#else
+#  ifndef assert   /* assert may be already defined, due to prior #include <assert.h> */
+#    define assert(condition) ((void)0)   /* disable assert (default) */
+#  endif
+#endif
+
+#if (DEBUGLEVEL>=2)
+#  define ZSTD_DEPS_NEED_IO
+#  include "zstd_deps.h"
+extern int g_debuglevel; /* the variable is only declared,
+                            it actually lives in debug.c,
+                            and is shared by the whole process.
+                            It's not thread-safe.
+                            It's useful when enabling very verbose levels
+                            on selective conditions (such as position in src) */
+
+#  define RAWLOG(l, ...) {                                       \
+                if (l<=g_debuglevel) {                           \
+                    ZSTD_DEBUG_PRINT(__VA_ARGS__);               \
+            }   }
+#  define DEBUGLOG(l, ...) {                                     \
+                if (l<=g_debuglevel) {                           \
+                    ZSTD_DEBUG_PRINT(__FILE__ ": " __VA_ARGS__); \
+                    ZSTD_DEBUG_PRINT(" \n");                     \
+            }   }
+#else
+#  define RAWLOG(l, ...)      {}    /* disabled */
+#  define DEBUGLOG(l, ...)    {}    /* disabled */
+#endif
+
+
+
+#endif /* DEBUG_H_12987983217 */
diff --git a/lib/zstd/common/entropy_common.c b/lib/zstd/common/entropy_common.c
new file mode 100644
index 0000000..53b47a2
--- /dev/null
+++ b/lib/zstd/common/entropy_common.c
@@ -0,0 +1,357 @@
+/* ******************************************************************
+ * Common functions of New Generation Entropy library
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ *
+ *  You can contact the author at :
+ *  - FSE+HUF source repository : https://github.com/Cyan4973/FiniteStateEntropy
+ *  - Public forum : https://groups.google.com/forum/#!forum/lz4c
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+****************************************************************** */
+
+/* *************************************
+*  Dependencies
+***************************************/
+#include "mem.h"
+#include "error_private.h"       /* ERR_*, ERROR */
+#define FSE_STATIC_LINKING_ONLY  /* FSE_MIN_TABLELOG */
+#include "fse.h"
+#define HUF_STATIC_LINKING_ONLY  /* HUF_TABLELOG_ABSOLUTEMAX */
+#include "huf.h"
+
+
+/*===   Version   ===*/
+unsigned FSE_versionNumber(void) { return FSE_VERSION_NUMBER; }
+
+
+/*===   Error Management   ===*/
+unsigned FSE_isError(size_t code) { return ERR_isError(code); }
+const char* FSE_getErrorName(size_t code) { return ERR_getErrorName(code); }
+
+unsigned HUF_isError(size_t code) { return ERR_isError(code); }
+const char* HUF_getErrorName(size_t code) { return ERR_getErrorName(code); }
+
+
+/*-**************************************************************
+*  FSE NCount encoding-decoding
+****************************************************************/
+static U32 FSE_ctz(U32 val)
+{
+    assert(val != 0);
+    {
+#   if (__GNUC__ >= 3)   /* GCC Intrinsic */
+        return __builtin_ctz(val);
+#   else   /* Software version */
+        U32 count = 0;
+        while ((val & 1) == 0) {
+            val >>= 1;
+            ++count;
+        }
+        return count;
+#   endif
+    }
+}
+
+FORCE_INLINE_TEMPLATE
+size_t FSE_readNCount_body(short* normalizedCounter, unsigned* maxSVPtr, unsigned* tableLogPtr,
+                           const void* headerBuffer, size_t hbSize)
+{
+    const BYTE* const istart = (const BYTE*) headerBuffer;
+    const BYTE* const iend = istart + hbSize;
+    const BYTE* ip = istart;
+    int nbBits;
+    int remaining;
+    int threshold;
+    U32 bitStream;
+    int bitCount;
+    unsigned charnum = 0;
+    unsigned const maxSV1 = *maxSVPtr + 1;
+    int previous0 = 0;
+
+    if (hbSize < 8) {
+        /* This function only works when hbSize >= 8 */
+        char buffer[8] = {0};
+        ZSTD_memcpy(buffer, headerBuffer, hbSize);
+        {   size_t const countSize = FSE_readNCount(normalizedCounter, maxSVPtr, tableLogPtr,
+                                                    buffer, sizeof(buffer));
+            if (FSE_isError(countSize)) return countSize;
+            if (countSize > hbSize) return ERROR(corruption_detected);
+            return countSize;
+    }   }
+    assert(hbSize >= 8);
+
+    /* init */
+    ZSTD_memset(normalizedCounter, 0, (*maxSVPtr+1) * sizeof(normalizedCounter[0]));   /* all symbols not present in NCount have a frequency of 0 */
+    bitStream = MEM_readLE32(ip);
+    nbBits = (bitStream & 0xF) + FSE_MIN_TABLELOG;   /* extract tableLog */
+    if (nbBits > FSE_TABLELOG_ABSOLUTE_MAX) return ERROR(tableLog_tooLarge);
+    bitStream >>= 4;
+    bitCount = 4;
+    *tableLogPtr = nbBits;
+    remaining = (1<<nbBits)+1;
+    threshold = 1<<nbBits;
+    nbBits++;
+
+    for (;;) {
+        if (previous0) {
+            /* Count the number of repeats. Each time the
+             * 2-bit repeat code is 0b11 there is another
+             * repeat.
+             * Avoid UB by setting the high bit to 1.
+             */
+            int repeats = FSE_ctz(~bitStream | 0x80000000) >> 1;
+            while (repeats >= 12) {
+                charnum += 3 * 12;
+                if (LIKELY(ip <= iend-7)) {
+                    ip += 3;
+                } else {
+                    bitCount -= (int)(8 * (iend - 7 - ip));
+                    bitCount &= 31;
+                    ip = iend - 4;
+                }
+                bitStream = MEM_readLE32(ip) >> bitCount;
+                repeats = FSE_ctz(~bitStream | 0x80000000) >> 1;
+            }
+            charnum += 3 * repeats;
+            bitStream >>= 2 * repeats;
+            bitCount += 2 * repeats;
+
+            /* Add the final repeat which isn't 0b11. */
+            assert((bitStream & 3) < 3);
+            charnum += bitStream & 3;
+            bitCount += 2;
+
+            /* This is an error, but break and return an error
+             * at the end, because returning out of a loop makes
+             * it harder for the compiler to optimize.
+             */
+            if (charnum >= maxSV1) break;
+
+            /* We don't need to set the normalized count to 0
+             * because we already memset the whole buffer to 0.
+             */
+
+            if (LIKELY(ip <= iend-7) || (ip + (bitCount>>3) <= iend-4)) {
+                assert((bitCount >> 3) <= 3); /* For first condition to work */
+                ip += bitCount>>3;
+                bitCount &= 7;
+            } else {
+                bitCount -= (int)(8 * (iend - 4 - ip));
+                bitCount &= 31;
+                ip = iend - 4;
+            }
+            bitStream = MEM_readLE32(ip) >> bitCount;
+        }
+        {
+            int const max = (2*threshold-1) - remaining;
+            int count;
+
+            if ((bitStream & (threshold-1)) < (U32)max) {
+                count = bitStream & (threshold-1);
+                bitCount += nbBits-1;
+            } else {
+                count = bitStream & (2*threshold-1);
+                if (count >= threshold) count -= max;
+                bitCount += nbBits;
+            }
+
+            count--;   /* extra accuracy */
+            /* When it matters (small blocks), this is a
+             * predictable branch, because we don't use -1.
+             */
+            if (count >= 0) {
+                remaining -= count;
+            } else {
+                assert(count == -1);
+                remaining += count;
+            }
+            normalizedCounter[charnum++] = (short)count;
+            previous0 = !count;
+
+            assert(threshold > 1);
+            if (remaining < threshold) {
+                /* This branch can be folded into the
+                 * threshold update condition because we
+                 * know that threshold > 1.
+                 */
+                if (remaining <= 1) break;
+                nbBits = BIT_highbit32(remaining) + 1;
+                threshold = 1 << (nbBits - 1);
+            }
+            if (charnum >= maxSV1) break;
+
+            if (LIKELY(ip <= iend-7) || (ip + (bitCount>>3) <= iend-4)) {
+                ip += bitCount>>3;
+                bitCount &= 7;
+            } else {
+                bitCount -= (int)(8 * (iend - 4 - ip));
+                bitCount &= 31;
+                ip = iend - 4;
+            }
+            bitStream = MEM_readLE32(ip) >> bitCount;
+    }   }
+    if (remaining != 1) return ERROR(corruption_detected);
+    /* Only possible when there are too many zeros. */
+    if (charnum > maxSV1) return ERROR(maxSymbolValue_tooSmall);
+    if (bitCount > 32) return ERROR(corruption_detected);
+    *maxSVPtr = charnum-1;
+
+    ip += (bitCount+7)>>3;
+    return ip-istart;
+}
+
+/* Avoids the FORCE_INLINE of the _body() function. */
+static size_t FSE_readNCount_body_default(
+        short* normalizedCounter, unsigned* maxSVPtr, unsigned* tableLogPtr,
+        const void* headerBuffer, size_t hbSize)
+{
+    return FSE_readNCount_body(normalizedCounter, maxSVPtr, tableLogPtr, headerBuffer, hbSize);
+}
+
+#if DYNAMIC_BMI2
+TARGET_ATTRIBUTE("bmi2") static size_t FSE_readNCount_body_bmi2(
+        short* normalizedCounter, unsigned* maxSVPtr, unsigned* tableLogPtr,
+        const void* headerBuffer, size_t hbSize)
+{
+    return FSE_readNCount_body(normalizedCounter, maxSVPtr, tableLogPtr, headerBuffer, hbSize);
+}
+#endif
+
+size_t FSE_readNCount_bmi2(
+        short* normalizedCounter, unsigned* maxSVPtr, unsigned* tableLogPtr,
+        const void* headerBuffer, size_t hbSize, int bmi2)
+{
+#if DYNAMIC_BMI2
+    if (bmi2) {
+        return FSE_readNCount_body_bmi2(normalizedCounter, maxSVPtr, tableLogPtr, headerBuffer, hbSize);
+    }
+#endif
+    (void)bmi2;
+    return FSE_readNCount_body_default(normalizedCounter, maxSVPtr, tableLogPtr, headerBuffer, hbSize);
+}
+
+size_t FSE_readNCount(
+        short* normalizedCounter, unsigned* maxSVPtr, unsigned* tableLogPtr,
+        const void* headerBuffer, size_t hbSize)
+{
+    return FSE_readNCount_bmi2(normalizedCounter, maxSVPtr, tableLogPtr, headerBuffer, hbSize, /* bmi2 */ 0);
+}
+
+
+/*! HUF_readStats() :
+    Read compact Huffman tree, saved by HUF_writeCTable().
+    `huffWeight` is destination buffer.
+    `rankStats` is assumed to be a table of at least HUF_TABLELOG_MAX U32.
+    @return : size read from `src` , or an error Code .
+    Note : Needed by HUF_readCTable() and HUF_readDTableX?() .
+*/
+size_t HUF_readStats(BYTE* huffWeight, size_t hwSize, U32* rankStats,
+                     U32* nbSymbolsPtr, U32* tableLogPtr,
+                     const void* src, size_t srcSize)
+{
+    U32 wksp[HUF_READ_STATS_WORKSPACE_SIZE_U32];
+    return HUF_readStats_wksp(huffWeight, hwSize, rankStats, nbSymbolsPtr, tableLogPtr, src, srcSize, wksp, sizeof(wksp), /* bmi2 */ 0);
+}
+
+FORCE_INLINE_TEMPLATE size_t
+HUF_readStats_body(BYTE* huffWeight, size_t hwSize, U32* rankStats,
+                   U32* nbSymbolsPtr, U32* tableLogPtr,
+                   const void* src, size_t srcSize,
+                   void* workSpace, size_t wkspSize,
+                   int bmi2)
+{
+    U32 weightTotal;
+    const BYTE* ip = (const BYTE*) src;
+    size_t iSize;
+    size_t oSize;
+
+    if (!srcSize) return ERROR(srcSize_wrong);
+    iSize = ip[0];
+    /* ZSTD_memset(huffWeight, 0, hwSize);   *//* is not necessary, even though some analyzer complain ... */
+
+    if (iSize >= 128) {  /* special header */
+        oSize = iSize - 127;
+        iSize = ((oSize+1)/2);
+        if (iSize+1 > srcSize) return ERROR(srcSize_wrong);
+        if (oSize >= hwSize) return ERROR(corruption_detected);
+        ip += 1;
+        {   U32 n;
+            for (n=0; n<oSize; n+=2) {
+                huffWeight[n]   = ip[n/2] >> 4;
+                huffWeight[n+1] = ip[n/2] & 15;
+    }   }   }
+    else  {   /* header compressed with FSE (normal case) */
+        if (iSize+1 > srcSize) return ERROR(srcSize_wrong);
+        /* max (hwSize-1) values decoded, as last one is implied */
+        oSize = FSE_decompress_wksp_bmi2(huffWeight, hwSize-1, ip+1, iSize, 6, workSpace, wkspSize, bmi2);
+        if (FSE_isError(oSize)) return oSize;
+    }
+
+    /* collect weight stats */
+    ZSTD_memset(rankStats, 0, (HUF_TABLELOG_MAX + 1) * sizeof(U32));
+    weightTotal = 0;
+    {   U32 n; for (n=0; n<oSize; n++) {
+            if (huffWeight[n] >= HUF_TABLELOG_MAX) return ERROR(corruption_detected);
+            rankStats[huffWeight[n]]++;
+            weightTotal += (1 << huffWeight[n]) >> 1;
+    }   }
+    if (weightTotal == 0) return ERROR(corruption_detected);
+
+    /* get last non-null symbol weight (implied, total must be 2^n) */
+    {   U32 const tableLog = BIT_highbit32(weightTotal) + 1;
+        if (tableLog > HUF_TABLELOG_MAX) return ERROR(corruption_detected);
+        *tableLogPtr = tableLog;
+        /* determine last weight */
+        {   U32 const total = 1 << tableLog;
+            U32 const rest = total - weightTotal;
+            U32 const verif = 1 << BIT_highbit32(rest);
+            U32 const lastWeight = BIT_highbit32(rest) + 1;
+            if (verif != rest) return ERROR(corruption_detected);    /* last value must be a clean power of 2 */
+            huffWeight[oSize] = (BYTE)lastWeight;
+            rankStats[lastWeight]++;
+    }   }
+
+    /* check tree construction validity */
+    if ((rankStats[1] < 2) || (rankStats[1] & 1)) return ERROR(corruption_detected);   /* by construction : at least 2 elts of rank 1, must be even */
+
+    /* results */
+    *nbSymbolsPtr = (U32)(oSize+1);
+    return iSize+1;
+}
+
+/* Avoids the FORCE_INLINE of the _body() function. */
+static size_t HUF_readStats_body_default(BYTE* huffWeight, size_t hwSize, U32* rankStats,
+                     U32* nbSymbolsPtr, U32* tableLogPtr,
+                     const void* src, size_t srcSize,
+                     void* workSpace, size_t wkspSize)
+{
+    return HUF_readStats_body(huffWeight, hwSize, rankStats, nbSymbolsPtr, tableLogPtr, src, srcSize, workSpace, wkspSize, 0);
+}
+
+#if DYNAMIC_BMI2
+static TARGET_ATTRIBUTE("bmi2") size_t HUF_readStats_body_bmi2(BYTE* huffWeight, size_t hwSize, U32* rankStats,
+                     U32* nbSymbolsPtr, U32* tableLogPtr,
+                     const void* src, size_t srcSize,
+                     void* workSpace, size_t wkspSize)
+{
+    return HUF_readStats_body(huffWeight, hwSize, rankStats, nbSymbolsPtr, tableLogPtr, src, srcSize, workSpace, wkspSize, 1);
+}
+#endif
+
+size_t HUF_readStats_wksp(BYTE* huffWeight, size_t hwSize, U32* rankStats,
+                     U32* nbSymbolsPtr, U32* tableLogPtr,
+                     const void* src, size_t srcSize,
+                     void* workSpace, size_t wkspSize,
+                     int bmi2)
+{
+#if DYNAMIC_BMI2
+    if (bmi2) {
+        return HUF_readStats_body_bmi2(huffWeight, hwSize, rankStats, nbSymbolsPtr, tableLogPtr, src, srcSize, workSpace, wkspSize);
+    }
+#endif
+    (void)bmi2;
+    return HUF_readStats_body_default(huffWeight, hwSize, rankStats, nbSymbolsPtr, tableLogPtr, src, srcSize, workSpace, wkspSize);
+}
diff --git a/lib/zstd/common/error_private.c b/lib/zstd/common/error_private.c
new file mode 100644
index 0000000..6d1135f
--- /dev/null
+++ b/lib/zstd/common/error_private.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+/* The purpose of this file is to have a single list of error strings embedded in binary */
+
+#include "error_private.h"
+
+const char* ERR_getErrorString(ERR_enum code)
+{
+#ifdef ZSTD_STRIP_ERROR_STRINGS
+    (void)code;
+    return "Error strings stripped";
+#else
+    static const char* const notErrorCode = "Unspecified error code";
+    switch( code )
+    {
+    case PREFIX(no_error): return "No error detected";
+    case PREFIX(GENERIC):  return "Error (generic)";
+    case PREFIX(prefix_unknown): return "Unknown frame descriptor";
+    case PREFIX(version_unsupported): return "Version not supported";
+    case PREFIX(frameParameter_unsupported): return "Unsupported frame parameter";
+    case PREFIX(frameParameter_windowTooLarge): return "Frame requires too much memory for decoding";
+    case PREFIX(corruption_detected): return "Corrupted block detected";
+    case PREFIX(checksum_wrong): return "Restored data doesn't match checksum";
+    case PREFIX(parameter_unsupported): return "Unsupported parameter";
+    case PREFIX(parameter_outOfBound): return "Parameter is out of bound";
+    case PREFIX(init_missing): return "Context should be init first";
+    case PREFIX(memory_allocation): return "Allocation error : not enough memory";
+    case PREFIX(workSpace_tooSmall): return "workSpace buffer is not large enough";
+    case PREFIX(stage_wrong): return "Operation not authorized at current processing stage";
+    case PREFIX(tableLog_tooLarge): return "tableLog requires too much memory : unsupported";
+    case PREFIX(maxSymbolValue_tooLarge): return "Unsupported max Symbol Value : too large";
+    case PREFIX(maxSymbolValue_tooSmall): return "Specified maxSymbolValue is too small";
+    case PREFIX(dictionary_corrupted): return "Dictionary is corrupted";
+    case PREFIX(dictionary_wrong): return "Dictionary mismatch";
+    case PREFIX(dictionaryCreation_failed): return "Cannot create Dictionary from provided samples";
+    case PREFIX(dstSize_tooSmall): return "Destination buffer is too small";
+    case PREFIX(srcSize_wrong): return "Src size is incorrect";
+    case PREFIX(dstBuffer_null): return "Operation on NULL destination buffer";
+        /* following error codes are not stable and may be removed or changed in a future version */
+    case PREFIX(frameIndex_tooLarge): return "Frame index is too large";
+    case PREFIX(seekableIO): return "An I/O error occurred when reading/seeking";
+    case PREFIX(dstBuffer_wrong): return "Destination buffer is wrong";
+    case PREFIX(srcBuffer_wrong): return "Source buffer is wrong";
+    case PREFIX(maxCode):
+    default: return notErrorCode;
+    }
+#endif
+}
diff --git a/lib/zstd/common/error_private.h b/lib/zstd/common/error_private.h
new file mode 100644
index 0000000..d14e686
--- /dev/null
+++ b/lib/zstd/common/error_private.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+/* Note : this module is expected to remain private, do not expose it */
+
+#ifndef ERROR_H_MODULE
+#define ERROR_H_MODULE
+
+
+
+/* ****************************************
+*  Dependencies
+******************************************/
+#include "zstd_deps.h"    /* size_t */
+#include <linux/zstd_errors.h>  /* enum list */
+
+
+/* ****************************************
+*  Compiler-specific
+******************************************/
+#define ERR_STATIC static __attribute__((unused))
+
+
+/*-****************************************
+*  Customization (error_public.h)
+******************************************/
+typedef ZSTD_ErrorCode ERR_enum;
+#define PREFIX(name) ZSTD_error_##name
+
+
+/*-****************************************
+*  Error codes handling
+******************************************/
+#undef ERROR   /* already defined on Visual Studio */
+#define ERROR(name) ZSTD_ERROR(name)
+#define ZSTD_ERROR(name) ((size_t)-PREFIX(name))
+
+ERR_STATIC unsigned ERR_isError(size_t code) { return (code > ERROR(maxCode)); }
+
+ERR_STATIC ERR_enum ERR_getErrorCode(size_t code) { if (!ERR_isError(code)) return (ERR_enum)0; return (ERR_enum) (0-code); }
+
+/* check and forward error code */
+#define CHECK_V_F(e, f) size_t const e = f; if (ERR_isError(e)) return e
+#define CHECK_F(f)   { CHECK_V_F(_var_err__, f); }
+
+
+/*-****************************************
+*  Error Strings
+******************************************/
+
+const char* ERR_getErrorString(ERR_enum code);   /* error_private.c */
+
+ERR_STATIC const char* ERR_getErrorName(size_t code)
+{
+    return ERR_getErrorString(ERR_getErrorCode(code));
+}
+
+
+#endif /* ERROR_H_MODULE */
diff --git a/lib/zstd/common/fse.h b/lib/zstd/common/fse.h
new file mode 100644
index 0000000..0bb174c
--- /dev/null
+++ b/lib/zstd/common/fse.h
@@ -0,0 +1,710 @@
+/* ******************************************************************
+ * FSE : Finite State Entropy codec
+ * Public Prototypes declaration
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ *
+ * You can contact the author at :
+ * - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+****************************************************************** */
+
+
+#ifndef FSE_H
+#define FSE_H
+
+
+/*-*****************************************
+*  Dependencies
+******************************************/
+#include "zstd_deps.h"    /* size_t, ptrdiff_t */
+
+
+/*-*****************************************
+*  FSE_PUBLIC_API : control library symbols visibility
+******************************************/
+#if defined(FSE_DLL_EXPORT) && (FSE_DLL_EXPORT==1) && defined(__GNUC__) && (__GNUC__ >= 4)
+#  define FSE_PUBLIC_API __attribute__ ((visibility ("default")))
+#elif defined(FSE_DLL_EXPORT) && (FSE_DLL_EXPORT==1)   /* Visual expected */
+#  define FSE_PUBLIC_API __declspec(dllexport)
+#elif defined(FSE_DLL_IMPORT) && (FSE_DLL_IMPORT==1)
+#  define FSE_PUBLIC_API __declspec(dllimport) /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/
+#else
+#  define FSE_PUBLIC_API
+#endif
+
+/*------   Version   ------*/
+#define FSE_VERSION_MAJOR    0
+#define FSE_VERSION_MINOR    9
+#define FSE_VERSION_RELEASE  0
+
+#define FSE_LIB_VERSION FSE_VERSION_MAJOR.FSE_VERSION_MINOR.FSE_VERSION_RELEASE
+#define FSE_QUOTE(str) #str
+#define FSE_EXPAND_AND_QUOTE(str) FSE_QUOTE(str)
+#define FSE_VERSION_STRING FSE_EXPAND_AND_QUOTE(FSE_LIB_VERSION)
+
+#define FSE_VERSION_NUMBER  (FSE_VERSION_MAJOR *100*100 + FSE_VERSION_MINOR *100 + FSE_VERSION_RELEASE)
+FSE_PUBLIC_API unsigned FSE_versionNumber(void);   /*< library version number; to be used when checking dll version */
+
+
+/*-****************************************
+*  FSE simple functions
+******************************************/
+/*! FSE_compress() :
+    Compress content of buffer 'src', of size 'srcSize', into destination buffer 'dst'.
+    'dst' buffer must be already allocated. Compression runs faster is dstCapacity >= FSE_compressBound(srcSize).
+    @return : size of compressed data (<= dstCapacity).
+    Special values : if return == 0, srcData is not compressible => Nothing is stored within dst !!!
+                     if return == 1, srcData is a single byte symbol * srcSize times. Use RLE compression instead.
+                     if FSE_isError(return), compression failed (more details using FSE_getErrorName())
+*/
+FSE_PUBLIC_API size_t FSE_compress(void* dst, size_t dstCapacity,
+                             const void* src, size_t srcSize);
+
+/*! FSE_decompress():
+    Decompress FSE data from buffer 'cSrc', of size 'cSrcSize',
+    into already allocated destination buffer 'dst', of size 'dstCapacity'.
+    @return : size of regenerated data (<= maxDstSize),
+              or an error code, which can be tested using FSE_isError() .
+
+    ** Important ** : FSE_decompress() does not decompress non-compressible nor RLE data !!!
+    Why ? : making this distinction requires a header.
+    Header management is intentionally delegated to the user layer, which can better manage special cases.
+*/
+FSE_PUBLIC_API size_t FSE_decompress(void* dst,  size_t dstCapacity,
+                               const void* cSrc, size_t cSrcSize);
+
+
+/*-*****************************************
+*  Tool functions
+******************************************/
+FSE_PUBLIC_API size_t FSE_compressBound(size_t size);       /* maximum compressed size */
+
+/* Error Management */
+FSE_PUBLIC_API unsigned    FSE_isError(size_t code);        /* tells if a return value is an error code */
+FSE_PUBLIC_API const char* FSE_getErrorName(size_t code);   /* provides error code string (useful for debugging) */
+
+
+/*-*****************************************
+*  FSE advanced functions
+******************************************/
+/*! FSE_compress2() :
+    Same as FSE_compress(), but allows the selection of 'maxSymbolValue' and 'tableLog'
+    Both parameters can be defined as '0' to mean : use default value
+    @return : size of compressed data
+    Special values : if return == 0, srcData is not compressible => Nothing is stored within cSrc !!!
+                     if return == 1, srcData is a single byte symbol * srcSize times. Use RLE compression.
+                     if FSE_isError(return), it's an error code.
+*/
+FSE_PUBLIC_API size_t FSE_compress2 (void* dst, size_t dstSize, const void* src, size_t srcSize, unsigned maxSymbolValue, unsigned tableLog);
+
+
+/*-*****************************************
+*  FSE detailed API
+******************************************/
+/*!
+FSE_compress() does the following:
+1. count symbol occurrence from source[] into table count[] (see hist.h)
+2. normalize counters so that sum(count[]) == Power_of_2 (2^tableLog)
+3. save normalized counters to memory buffer using writeNCount()
+4. build encoding table 'CTable' from normalized counters
+5. encode the data stream using encoding table 'CTable'
+
+FSE_decompress() does the following:
+1. read normalized counters with readNCount()
+2. build decoding table 'DTable' from normalized counters
+3. decode the data stream using decoding table 'DTable'
+
+The following API allows targeting specific sub-functions for advanced tasks.
+For example, it's possible to compress several blocks using the same 'CTable',
+or to save and provide normalized distribution using external method.
+*/
+
+/* *** COMPRESSION *** */
+
+/*! FSE_optimalTableLog():
+    dynamically downsize 'tableLog' when conditions are met.
+    It saves CPU time, by using smaller tables, while preserving or even improving compression ratio.
+    @return : recommended tableLog (necessarily <= 'maxTableLog') */
+FSE_PUBLIC_API unsigned FSE_optimalTableLog(unsigned maxTableLog, size_t srcSize, unsigned maxSymbolValue);
+
+/*! FSE_normalizeCount():
+    normalize counts so that sum(count[]) == Power_of_2 (2^tableLog)
+    'normalizedCounter' is a table of short, of minimum size (maxSymbolValue+1).
+    useLowProbCount is a boolean parameter which trades off compressed size for
+    faster header decoding. When it is set to 1, the compressed data will be slightly
+    smaller. And when it is set to 0, FSE_readNCount() and FSE_buildDTable() will be
+    faster. If you are compressing a small amount of data (< 2 KB) then useLowProbCount=0
+    is a good default, since header deserialization makes a big speed difference.
+    Otherwise, useLowProbCount=1 is a good default, since the speed difference is small.
+    @return : tableLog,
+              or an errorCode, which can be tested using FSE_isError() */
+FSE_PUBLIC_API size_t FSE_normalizeCount(short* normalizedCounter, unsigned tableLog,
+                    const unsigned* count, size_t srcSize, unsigned maxSymbolValue, unsigned useLowProbCount);
+
+/*! FSE_NCountWriteBound():
+    Provides the maximum possible size of an FSE normalized table, given 'maxSymbolValue' and 'tableLog'.
+    Typically useful for allocation purpose. */
+FSE_PUBLIC_API size_t FSE_NCountWriteBound(unsigned maxSymbolValue, unsigned tableLog);
+
+/*! FSE_writeNCount():
+    Compactly save 'normalizedCounter' into 'buffer'.
+    @return : size of the compressed table,
+              or an errorCode, which can be tested using FSE_isError(). */
+FSE_PUBLIC_API size_t FSE_writeNCount (void* buffer, size_t bufferSize,
+                                 const short* normalizedCounter,
+                                 unsigned maxSymbolValue, unsigned tableLog);
+
+/*! Constructor and Destructor of FSE_CTable.
+    Note that FSE_CTable size depends on 'tableLog' and 'maxSymbolValue' */
+typedef unsigned FSE_CTable;   /* don't allocate that. It's only meant to be more restrictive than void* */
+FSE_PUBLIC_API FSE_CTable* FSE_createCTable (unsigned maxSymbolValue, unsigned tableLog);
+FSE_PUBLIC_API void        FSE_freeCTable (FSE_CTable* ct);
+
+/*! FSE_buildCTable():
+    Builds `ct`, which must be already allocated, using FSE_createCTable().
+    @return : 0, or an errorCode, which can be tested using FSE_isError() */
+FSE_PUBLIC_API size_t FSE_buildCTable(FSE_CTable* ct, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);
+
+/*! FSE_compress_usingCTable():
+    Compress `src` using `ct` into `dst` which must be already allocated.
+    @return : size of compressed data (<= `dstCapacity`),
+              or 0 if compressed data could not fit into `dst`,
+              or an errorCode, which can be tested using FSE_isError() */
+FSE_PUBLIC_API size_t FSE_compress_usingCTable (void* dst, size_t dstCapacity, const void* src, size_t srcSize, const FSE_CTable* ct);
+
+/*!
+Tutorial :
+----------
+The first step is to count all symbols. FSE_count() does this job very fast.
+Result will be saved into 'count', a table of unsigned int, which must be already allocated, and have 'maxSymbolValuePtr[0]+1' cells.
+'src' is a table of bytes of size 'srcSize'. All values within 'src' MUST be <= maxSymbolValuePtr[0]
+maxSymbolValuePtr[0] will be updated, with its real value (necessarily <= original value)
+FSE_count() will return the number of occurrence of the most frequent symbol.
+This can be used to know if there is a single symbol within 'src', and to quickly evaluate its compressibility.
+If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError()).
+
+The next step is to normalize the frequencies.
+FSE_normalizeCount() will ensure that sum of frequencies is == 2 ^'tableLog'.
+It also guarantees a minimum of 1 to any Symbol with frequency >= 1.
+You can use 'tableLog'==0 to mean "use default tableLog value".
+If you are unsure of which tableLog value to use, you can ask FSE_optimalTableLog(),
+which will provide the optimal valid tableLog given sourceSize, maxSymbolValue, and a user-defined maximum (0 means "default").
+
+The result of FSE_normalizeCount() will be saved into a table,
+called 'normalizedCounter', which is a table of signed short.
+'normalizedCounter' must be already allocated, and have at least 'maxSymbolValue+1' cells.
+The return value is tableLog if everything proceeded as expected.
+It is 0 if there is a single symbol within distribution.
+If there is an error (ex: invalid tableLog value), the function will return an ErrorCode (which can be tested using FSE_isError()).
+
+'normalizedCounter' can be saved in a compact manner to a memory area using FSE_writeNCount().
+'buffer' must be already allocated.
+For guaranteed success, buffer size must be at least FSE_headerBound().
+The result of the function is the number of bytes written into 'buffer'.
+If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError(); ex : buffer size too small).
+
+'normalizedCounter' can then be used to create the compression table 'CTable'.
+The space required by 'CTable' must be already allocated, using FSE_createCTable().
+You can then use FSE_buildCTable() to fill 'CTable'.
+If there is an error, both functions will return an ErrorCode (which can be tested using FSE_isError()).
+
+'CTable' can then be used to compress 'src', with FSE_compress_usingCTable().
+Similar to FSE_count(), the convention is that 'src' is assumed to be a table of char of size 'srcSize'
+The function returns the size of compressed data (without header), necessarily <= `dstCapacity`.
+If it returns '0', compressed data could not fit into 'dst'.
+If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError()).
+*/
+
+
+/* *** DECOMPRESSION *** */
+
+/*! FSE_readNCount():
+    Read compactly saved 'normalizedCounter' from 'rBuffer'.
+    @return : size read from 'rBuffer',
+              or an errorCode, which can be tested using FSE_isError().
+              maxSymbolValuePtr[0] and tableLogPtr[0] will also be updated with their respective values */
+FSE_PUBLIC_API size_t FSE_readNCount (short* normalizedCounter,
+                           unsigned* maxSymbolValuePtr, unsigned* tableLogPtr,
+                           const void* rBuffer, size_t rBuffSize);
+
+/*! FSE_readNCount_bmi2():
+ * Same as FSE_readNCount() but pass bmi2=1 when your CPU supports BMI2 and 0 otherwise.
+ */
+FSE_PUBLIC_API size_t FSE_readNCount_bmi2(short* normalizedCounter,
+                           unsigned* maxSymbolValuePtr, unsigned* tableLogPtr,
+                           const void* rBuffer, size_t rBuffSize, int bmi2);
+
+/*! Constructor and Destructor of FSE_DTable.
+    Note that its size depends on 'tableLog' */
+typedef unsigned FSE_DTable;   /* don't allocate that. It's just a way to be more restrictive than void* */
+FSE_PUBLIC_API FSE_DTable* FSE_createDTable(unsigned tableLog);
+FSE_PUBLIC_API void        FSE_freeDTable(FSE_DTable* dt);
+
+/*! FSE_buildDTable():
+    Builds 'dt', which must be already allocated, using FSE_createDTable().
+    return : 0, or an errorCode, which can be tested using FSE_isError() */
+FSE_PUBLIC_API size_t FSE_buildDTable (FSE_DTable* dt, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);
+
+/*! FSE_decompress_usingDTable():
+    Decompress compressed source `cSrc` of size `cSrcSize` using `dt`
+    into `dst` which must be already allocated.
+    @return : size of regenerated data (necessarily <= `dstCapacity`),
+              or an errorCode, which can be tested using FSE_isError() */
+FSE_PUBLIC_API size_t FSE_decompress_usingDTable(void* dst, size_t dstCapacity, const void* cSrc, size_t cSrcSize, const FSE_DTable* dt);
+
+/*!
+Tutorial :
+----------
+(Note : these functions only decompress FSE-compressed blocks.
+ If block is uncompressed, use memcpy() instead
+ If block is a single repeated byte, use memset() instead )
+
+The first step is to obtain the normalized frequencies of symbols.
+This can be performed by FSE_readNCount() if it was saved using FSE_writeNCount().
+'normalizedCounter' must be already allocated, and have at least 'maxSymbolValuePtr[0]+1' cells of signed short.
+In practice, that means it's necessary to know 'maxSymbolValue' beforehand,
+or size the table to handle worst case situations (typically 256).
+FSE_readNCount() will provide 'tableLog' and 'maxSymbolValue'.
+The result of FSE_readNCount() is the number of bytes read from 'rBuffer'.
+Note that 'rBufferSize' must be at least 4 bytes, even if useful information is less than that.
+If there is an error, the function will return an error code, which can be tested using FSE_isError().
+
+The next step is to build the decompression tables 'FSE_DTable' from 'normalizedCounter'.
+This is performed by the function FSE_buildDTable().
+The space required by 'FSE_DTable' must be already allocated using FSE_createDTable().
+If there is an error, the function will return an error code, which can be tested using FSE_isError().
+
+`FSE_DTable` can then be used to decompress `cSrc`, with FSE_decompress_usingDTable().
+`cSrcSize` must be strictly correct, otherwise decompression will fail.
+FSE_decompress_usingDTable() result will tell how many bytes were regenerated (<=`dstCapacity`).
+If there is an error, the function will return an error code, which can be tested using FSE_isError(). (ex: dst buffer too small)
+*/
+
+#endif  /* FSE_H */
+
+#if !defined(FSE_H_FSE_STATIC_LINKING_ONLY)
+#define FSE_H_FSE_STATIC_LINKING_ONLY
+
+/* *** Dependency *** */
+#include "bitstream.h"
+
+
+/* *****************************************
+*  Static allocation
+*******************************************/
+/* FSE buffer bounds */
+#define FSE_NCOUNTBOUND 512
+#define FSE_BLOCKBOUND(size) ((size) + ((size)>>7) + 4 /* fse states */ + sizeof(size_t) /* bitContainer */)
+#define FSE_COMPRESSBOUND(size) (FSE_NCOUNTBOUND + FSE_BLOCKBOUND(size))   /* Macro version, useful for static allocation */
+
+/* It is possible to statically allocate FSE CTable/DTable as a table of FSE_CTable/FSE_DTable using below macros */
+#define FSE_CTABLE_SIZE_U32(maxTableLog, maxSymbolValue)   (1 + (1<<((maxTableLog)-1)) + (((maxSymbolValue)+1)*2))
+#define FSE_DTABLE_SIZE_U32(maxTableLog)                   (1 + (1<<(maxTableLog)))
+
+/* or use the size to malloc() space directly. Pay attention to alignment restrictions though */
+#define FSE_CTABLE_SIZE(maxTableLog, maxSymbolValue)   (FSE_CTABLE_SIZE_U32(maxTableLog, maxSymbolValue) * sizeof(FSE_CTable))
+#define FSE_DTABLE_SIZE(maxTableLog)                   (FSE_DTABLE_SIZE_U32(maxTableLog) * sizeof(FSE_DTable))
+
+
+/* *****************************************
+ *  FSE advanced API
+ ***************************************** */
+
+unsigned FSE_optimalTableLog_internal(unsigned maxTableLog, size_t srcSize, unsigned maxSymbolValue, unsigned minus);
+/*< same as FSE_optimalTableLog(), which used `minus==2` */
+
+/* FSE_compress_wksp() :
+ * Same as FSE_compress2(), but using an externally allocated scratch buffer (`workSpace`).
+ * FSE_COMPRESS_WKSP_SIZE_U32() provides the minimum size required for `workSpace` as a table of FSE_CTable.
+ */
+#define FSE_COMPRESS_WKSP_SIZE_U32(maxTableLog, maxSymbolValue)   ( FSE_CTABLE_SIZE_U32(maxTableLog, maxSymbolValue) + ((maxTableLog > 12) ? (1 << (maxTableLog - 2)) : 1024) )
+size_t FSE_compress_wksp (void* dst, size_t dstSize, const void* src, size_t srcSize, unsigned maxSymbolValue, unsigned tableLog, void* workSpace, size_t wkspSize);
+
+size_t FSE_buildCTable_raw (FSE_CTable* ct, unsigned nbBits);
+/*< build a fake FSE_CTable, designed for a flat distribution, where each symbol uses nbBits */
+
+size_t FSE_buildCTable_rle (FSE_CTable* ct, unsigned char symbolValue);
+/*< build a fake FSE_CTable, designed to compress always the same symbolValue */
+
+/* FSE_buildCTable_wksp() :
+ * Same as FSE_buildCTable(), but using an externally allocated scratch buffer (`workSpace`).
+ * `wkspSize` must be >= `FSE_BUILD_CTABLE_WORKSPACE_SIZE_U32(maxSymbolValue, tableLog)` of `unsigned`.
+ */
+#define FSE_BUILD_CTABLE_WORKSPACE_SIZE_U32(maxSymbolValue, tableLog) (maxSymbolValue + 2 + (1ull << (tableLog - 2)))
+#define FSE_BUILD_CTABLE_WORKSPACE_SIZE(maxSymbolValue, tableLog) (sizeof(unsigned) * FSE_BUILD_CTABLE_WORKSPACE_SIZE_U32(maxSymbolValue, tableLog))
+size_t FSE_buildCTable_wksp(FSE_CTable* ct, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog, void* workSpace, size_t wkspSize);
+
+#define FSE_BUILD_DTABLE_WKSP_SIZE(maxTableLog, maxSymbolValue) (sizeof(short) * (maxSymbolValue + 1) + (1ULL << maxTableLog) + 8)
+#define FSE_BUILD_DTABLE_WKSP_SIZE_U32(maxTableLog, maxSymbolValue) ((FSE_BUILD_DTABLE_WKSP_SIZE(maxTableLog, maxSymbolValue) + sizeof(unsigned) - 1) / sizeof(unsigned))
+FSE_PUBLIC_API size_t FSE_buildDTable_wksp(FSE_DTable* dt, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog, void* workSpace, size_t wkspSize);
+/*< Same as FSE_buildDTable(), using an externally allocated `workspace` produced with `FSE_BUILD_DTABLE_WKSP_SIZE_U32(maxSymbolValue)` */
+
+size_t FSE_buildDTable_raw (FSE_DTable* dt, unsigned nbBits);
+/*< build a fake FSE_DTable, designed to read a flat distribution where each symbol uses nbBits */
+
+size_t FSE_buildDTable_rle (FSE_DTable* dt, unsigned char symbolValue);
+/*< build a fake FSE_DTable, designed to always generate the same symbolValue */
+
+#define FSE_DECOMPRESS_WKSP_SIZE_U32(maxTableLog, maxSymbolValue) (FSE_DTABLE_SIZE_U32(maxTableLog) + FSE_BUILD_DTABLE_WKSP_SIZE_U32(maxTableLog, maxSymbolValue) + (FSE_MAX_SYMBOL_VALUE + 1) / 2 + 1)
+#define FSE_DECOMPRESS_WKSP_SIZE(maxTableLog, maxSymbolValue) (FSE_DECOMPRESS_WKSP_SIZE_U32(maxTableLog, maxSymbolValue) * sizeof(unsigned))
+size_t FSE_decompress_wksp(void* dst, size_t dstCapacity, const void* cSrc, size_t cSrcSize, unsigned maxLog, void* workSpace, size_t wkspSize);
+/*< same as FSE_decompress(), using an externally allocated `workSpace` produced with `FSE_DECOMPRESS_WKSP_SIZE_U32(maxLog, maxSymbolValue)` */
+
+size_t FSE_decompress_wksp_bmi2(void* dst, size_t dstCapacity, const void* cSrc, size_t cSrcSize, unsigned maxLog, void* workSpace, size_t wkspSize, int bmi2);
+/*< Same as FSE_decompress_wksp() but with dynamic BMI2 support. Pass 1 if your CPU supports BMI2 or 0 if it doesn't. */
+
+typedef enum {
+   FSE_repeat_none,  /*< Cannot use the previous table */
+   FSE_repeat_check, /*< Can use the previous table but it must be checked */
+   FSE_repeat_valid  /*< Can use the previous table and it is assumed to be valid */
+ } FSE_repeat;
+
+/* *****************************************
+*  FSE symbol compression API
+*******************************************/
+/*!
+   This API consists of small unitary functions, which highly benefit from being inlined.
+   Hence their body are included in next section.
+*/
+typedef struct {
+    ptrdiff_t   value;
+    const void* stateTable;
+    const void* symbolTT;
+    unsigned    stateLog;
+} FSE_CState_t;
+
+static void FSE_initCState(FSE_CState_t* CStatePtr, const FSE_CTable* ct);
+
+static void FSE_encodeSymbol(BIT_CStream_t* bitC, FSE_CState_t* CStatePtr, unsigned symbol);
+
+static void FSE_flushCState(BIT_CStream_t* bitC, const FSE_CState_t* CStatePtr);
+
+/*<
+These functions are inner components of FSE_compress_usingCTable().
+They allow the creation of custom streams, mixing multiple tables and bit sources.
+
+A key property to keep in mind is that encoding and decoding are done **in reverse direction**.
+So the first symbol you will encode is the last you will decode, like a LIFO stack.
+
+You will need a few variables to track your CStream. They are :
+
+FSE_CTable    ct;         // Provided by FSE_buildCTable()
+BIT_CStream_t bitStream;  // bitStream tracking structure
+FSE_CState_t  state;      // State tracking structure (can have several)
+
+
+The first thing to do is to init bitStream and state.
+    size_t errorCode = BIT_initCStream(&bitStream, dstBuffer, maxDstSize);
+    FSE_initCState(&state, ct);
+
+Note that BIT_initCStream() can produce an error code, so its result should be tested, using FSE_isError();
+You can then encode your input data, byte after byte.
+FSE_encodeSymbol() outputs a maximum of 'tableLog' bits at a time.
+Remember decoding will be done in reverse direction.
+    FSE_encodeByte(&bitStream, &state, symbol);
+
+At any time, you can also add any bit sequence.
+Note : maximum allowed nbBits is 25, for compatibility with 32-bits decoders
+    BIT_addBits(&bitStream, bitField, nbBits);
+
+The above methods don't commit data to memory, they just store it into local register, for speed.
+Local register size is 64-bits on 64-bits systems, 32-bits on 32-bits systems (size_t).
+Writing data to memory is a manual operation, performed by the flushBits function.
+    BIT_flushBits(&bitStream);
+
+Your last FSE encoding operation shall be to flush your last state value(s).
+    FSE_flushState(&bitStream, &state);
+
+Finally, you must close the bitStream.
+The function returns the size of CStream in bytes.
+If data couldn't fit into dstBuffer, it will return a 0 ( == not compressible)
+If there is an error, it returns an errorCode (which can be tested using FSE_isError()).
+    size_t size = BIT_closeCStream(&bitStream);
+*/
+
+
+/* *****************************************
+*  FSE symbol decompression API
+*******************************************/
+typedef struct {
+    size_t      state;
+    const void* table;   /* precise table may vary, depending on U16 */
+} FSE_DState_t;
+
+
+static void     FSE_initDState(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD, const FSE_DTable* dt);
+
+static unsigned char FSE_decodeSymbol(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD);
+
+static unsigned FSE_endOfDState(const FSE_DState_t* DStatePtr);
+
+/*<
+Let's now decompose FSE_decompress_usingDTable() into its unitary components.
+You will decode FSE-encoded symbols from the bitStream,
+and also any other bitFields you put in, **in reverse order**.
+
+You will need a few variables to track your bitStream. They are :
+
+BIT_DStream_t DStream;    // Stream context
+FSE_DState_t  DState;     // State context. Multiple ones are possible
+FSE_DTable*   DTablePtr;  // Decoding table, provided by FSE_buildDTable()
+
+The first thing to do is to init the bitStream.
+    errorCode = BIT_initDStream(&DStream, srcBuffer, srcSize);
+
+You should then retrieve your initial state(s)
+(in reverse flushing order if you have several ones) :
+    errorCode = FSE_initDState(&DState, &DStream, DTablePtr);
+
+You can then decode your data, symbol after symbol.
+For information the maximum number of bits read by FSE_decodeSymbol() is 'tableLog'.
+Keep in mind that symbols are decoded in reverse order, like a LIFO stack (last in, first out).
+    unsigned char symbol = FSE_decodeSymbol(&DState, &DStream);
+
+You can retrieve any bitfield you eventually stored into the bitStream (in reverse order)
+Note : maximum allowed nbBits is 25, for 32-bits compatibility
+    size_t bitField = BIT_readBits(&DStream, nbBits);
+
+All above operations only read from local register (which size depends on size_t).
+Refueling the register from memory is manually performed by the reload method.
+    endSignal = FSE_reloadDStream(&DStream);
+
+BIT_reloadDStream() result tells if there is still some more data to read from DStream.
+BIT_DStream_unfinished : there is still some data left into the DStream.
+BIT_DStream_endOfBuffer : Dstream reached end of buffer. Its container may no longer be completely filled.
+BIT_DStream_completed : Dstream reached its exact end, corresponding in general to decompression completed.
+BIT_DStream_tooFar : Dstream went too far. Decompression result is corrupted.
+
+When reaching end of buffer (BIT_DStream_endOfBuffer), progress slowly, notably if you decode multiple symbols per loop,
+to properly detect the exact end of stream.
+After each decoded symbol, check if DStream is fully consumed using this simple test :
+    BIT_reloadDStream(&DStream) >= BIT_DStream_completed
+
+When it's done, verify decompression is fully completed, by checking both DStream and the relevant states.
+Checking if DStream has reached its end is performed by :
+    BIT_endOfDStream(&DStream);
+Check also the states. There might be some symbols left there, if some high probability ones (>50%) are possible.
+    FSE_endOfDState(&DState);
+*/
+
+
+/* *****************************************
+*  FSE unsafe API
+*******************************************/
+static unsigned char FSE_decodeSymbolFast(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD);
+/* faster, but works only if nbBits is always >= 1 (otherwise, result will be corrupted) */
+
+
+/* *****************************************
+*  Implementation of inlined functions
+*******************************************/
+typedef struct {
+    int deltaFindState;
+    U32 deltaNbBits;
+} FSE_symbolCompressionTransform; /* total 8 bytes */
+
+MEM_STATIC void FSE_initCState(FSE_CState_t* statePtr, const FSE_CTable* ct)
+{
+    const void* ptr = ct;
+    const U16* u16ptr = (const U16*) ptr;
+    const U32 tableLog = MEM_read16(ptr);
+    statePtr->value = (ptrdiff_t)1<<tableLog;
+    statePtr->stateTable = u16ptr+2;
+    statePtr->symbolTT = ct + 1 + (tableLog ? (1<<(tableLog-1)) : 1);
+    statePtr->stateLog = tableLog;
+}
+
+
+/*! FSE_initCState2() :
+*   Same as FSE_initCState(), but the first symbol to include (which will be the last to be read)
+*   uses the smallest state value possible, saving the cost of this symbol */
+MEM_STATIC void FSE_initCState2(FSE_CState_t* statePtr, const FSE_CTable* ct, U32 symbol)
+{
+    FSE_initCState(statePtr, ct);
+    {   const FSE_symbolCompressionTransform symbolTT = ((const FSE_symbolCompressionTransform*)(statePtr->symbolTT))[symbol];
+        const U16* stateTable = (const U16*)(statePtr->stateTable);
+        U32 nbBitsOut  = (U32)((symbolTT.deltaNbBits + (1<<15)) >> 16);
+        statePtr->value = (nbBitsOut << 16) - symbolTT.deltaNbBits;
+        statePtr->value = stateTable[(statePtr->value >> nbBitsOut) + symbolTT.deltaFindState];
+    }
+}
+
+MEM_STATIC void FSE_encodeSymbol(BIT_CStream_t* bitC, FSE_CState_t* statePtr, unsigned symbol)
+{
+    FSE_symbolCompressionTransform const symbolTT = ((const FSE_symbolCompressionTransform*)(statePtr->symbolTT))[symbol];
+    const U16* const stateTable = (const U16*)(statePtr->stateTable);
+    U32 const nbBitsOut  = (U32)((statePtr->value + symbolTT.deltaNbBits) >> 16);
+    BIT_addBits(bitC, statePtr->value, nbBitsOut);
+    statePtr->value = stateTable[ (statePtr->value >> nbBitsOut) + symbolTT.deltaFindState];
+}
+
+MEM_STATIC void FSE_flushCState(BIT_CStream_t* bitC, const FSE_CState_t* statePtr)
+{
+    BIT_addBits(bitC, statePtr->value, statePtr->stateLog);
+    BIT_flushBits(bitC);
+}
+
+
+/* FSE_getMaxNbBits() :
+ * Approximate maximum cost of a symbol, in bits.
+ * Fractional get rounded up (i.e : a symbol with a normalized frequency of 3 gives the same result as a frequency of 2)
+ * note 1 : assume symbolValue is valid (<= maxSymbolValue)
+ * note 2 : if freq[symbolValue]==0, @return a fake cost of tableLog+1 bits */
+MEM_STATIC U32 FSE_getMaxNbBits(const void* symbolTTPtr, U32 symbolValue)
+{
+    const FSE_symbolCompressionTransform* symbolTT = (const FSE_symbolCompressionTransform*) symbolTTPtr;
+    return (symbolTT[symbolValue].deltaNbBits + ((1<<16)-1)) >> 16;
+}
+
+/* FSE_bitCost() :
+ * Approximate symbol cost, as fractional value, using fixed-point format (accuracyLog fractional bits)
+ * note 1 : assume symbolValue is valid (<= maxSymbolValue)
+ * note 2 : if freq[symbolValue]==0, @return a fake cost of tableLog+1 bits */
+MEM_STATIC U32 FSE_bitCost(const void* symbolTTPtr, U32 tableLog, U32 symbolValue, U32 accuracyLog)
+{
+    const FSE_symbolCompressionTransform* symbolTT = (const FSE_symbolCompressionTransform*) symbolTTPtr;
+    U32 const minNbBits = symbolTT[symbolValue].deltaNbBits >> 16;
+    U32 const threshold = (minNbBits+1) << 16;
+    assert(tableLog < 16);
+    assert(accuracyLog < 31-tableLog);  /* ensure enough room for renormalization double shift */
+    {   U32 const tableSize = 1 << tableLog;
+        U32 const deltaFromThreshold = threshold - (symbolTT[symbolValue].deltaNbBits + tableSize);
+        U32 const normalizedDeltaFromThreshold = (deltaFromThreshold << accuracyLog) >> tableLog;   /* linear interpolation (very approximate) */
+        U32 const bitMultiplier = 1 << accuracyLog;
+        assert(symbolTT[symbolValue].deltaNbBits + tableSize <= threshold);
+        assert(normalizedDeltaFromThreshold <= bitMultiplier);
+        return (minNbBits+1)*bitMultiplier - normalizedDeltaFromThreshold;
+    }
+}
+
+
+/* ======    Decompression    ====== */
+
+typedef struct {
+    U16 tableLog;
+    U16 fastMode;
+} FSE_DTableHeader;   /* sizeof U32 */
+
+typedef struct
+{
+    unsigned short newState;
+    unsigned char  symbol;
+    unsigned char  nbBits;
+} FSE_decode_t;   /* size == U32 */
+
+MEM_STATIC void FSE_initDState(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD, const FSE_DTable* dt)
+{
+    const void* ptr = dt;
+    const FSE_DTableHeader* const DTableH = (const FSE_DTableHeader*)ptr;
+    DStatePtr->state = BIT_readBits(bitD, DTableH->tableLog);
+    BIT_reloadDStream(bitD);
+    DStatePtr->table = dt + 1;
+}
+
+MEM_STATIC BYTE FSE_peekSymbol(const FSE_DState_t* DStatePtr)
+{
+    FSE_decode_t const DInfo = ((const FSE_decode_t*)(DStatePtr->table))[DStatePtr->state];
+    return DInfo.symbol;
+}
+
+MEM_STATIC void FSE_updateState(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD)
+{
+    FSE_decode_t const DInfo = ((const FSE_decode_t*)(DStatePtr->table))[DStatePtr->state];
+    U32 const nbBits = DInfo.nbBits;
+    size_t const lowBits = BIT_readBits(bitD, nbBits);
+    DStatePtr->state = DInfo.newState + lowBits;
+}
+
+MEM_STATIC BYTE FSE_decodeSymbol(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD)
+{
+    FSE_decode_t const DInfo = ((const FSE_decode_t*)(DStatePtr->table))[DStatePtr->state];
+    U32 const nbBits = DInfo.nbBits;
+    BYTE const symbol = DInfo.symbol;
+    size_t const lowBits = BIT_readBits(bitD, nbBits);
+
+    DStatePtr->state = DInfo.newState + lowBits;
+    return symbol;
+}
+
+/*! FSE_decodeSymbolFast() :
+    unsafe, only works if no symbol has a probability > 50% */
+MEM_STATIC BYTE FSE_decodeSymbolFast(FSE_DState_t* DStatePtr, BIT_DStream_t* bitD)
+{
+    FSE_decode_t const DInfo = ((const FSE_decode_t*)(DStatePtr->table))[DStatePtr->state];
+    U32 const nbBits = DInfo.nbBits;
+    BYTE const symbol = DInfo.symbol;
+    size_t const lowBits = BIT_readBitsFast(bitD, nbBits);
+
+    DStatePtr->state = DInfo.newState + lowBits;
+    return symbol;
+}
+
+MEM_STATIC unsigned FSE_endOfDState(const FSE_DState_t* DStatePtr)
+{
+    return DStatePtr->state == 0;
+}
+
+
+
+#ifndef FSE_COMMONDEFS_ONLY
+
+/* **************************************************************
+*  Tuning parameters
+****************************************************************/
+/*!MEMORY_USAGE :
+*  Memory usage formula : N->2^N Bytes (examples : 10 -> 1KB; 12 -> 4KB ; 16 -> 64KB; 20 -> 1MB; etc.)
+*  Increasing memory usage improves compression ratio
+*  Reduced memory usage can improve speed, due to cache effect
+*  Recommended max value is 14, for 16KB, which nicely fits into Intel x86 L1 cache */
+#ifndef FSE_MAX_MEMORY_USAGE
+#  define FSE_MAX_MEMORY_USAGE 14
+#endif
+#ifndef FSE_DEFAULT_MEMORY_USAGE
+#  define FSE_DEFAULT_MEMORY_USAGE 13
+#endif
+#if (FSE_DEFAULT_MEMORY_USAGE > FSE_MAX_MEMORY_USAGE)
+#  error "FSE_DEFAULT_MEMORY_USAGE must be <= FSE_MAX_MEMORY_USAGE"
+#endif
+
+/*!FSE_MAX_SYMBOL_VALUE :
+*  Maximum symbol value authorized.
+*  Required for proper stack allocation */
+#ifndef FSE_MAX_SYMBOL_VALUE
+#  define FSE_MAX_SYMBOL_VALUE 255
+#endif
+
+/* **************************************************************
+*  template functions type & suffix
+****************************************************************/
+#define FSE_FUNCTION_TYPE BYTE
+#define FSE_FUNCTION_EXTENSION
+#define FSE_DECODE_TYPE FSE_decode_t
+
+
+#endif   /* !FSE_COMMONDEFS_ONLY */
+
+
+/* ***************************************************************
+*  Constants
+*****************************************************************/
+#define FSE_MAX_TABLELOG  (FSE_MAX_MEMORY_USAGE-2)
+#define FSE_MAX_TABLESIZE (1U<<FSE_MAX_TABLELOG)
+#define FSE_MAXTABLESIZE_MASK (FSE_MAX_TABLESIZE-1)
+#define FSE_DEFAULT_TABLELOG (FSE_DEFAULT_MEMORY_USAGE-2)
+#define FSE_MIN_TABLELOG 5
+
+#define FSE_TABLELOG_ABSOLUTE_MAX 15
+#if FSE_MAX_TABLELOG > FSE_TABLELOG_ABSOLUTE_MAX
+#  error "FSE_MAX_TABLELOG > FSE_TABLELOG_ABSOLUTE_MAX is not supported"
+#endif
+
+#define FSE_TABLESTEP(tableSize) (((tableSize)>>1) + ((tableSize)>>3) + 3)
+
+
+#endif /* FSE_STATIC_LINKING_ONLY */
+
+
diff --git a/lib/zstd/common/fse_decompress.c b/lib/zstd/common/fse_decompress.c
new file mode 100644
index 0000000..2c8bbe3
--- /dev/null
+++ b/lib/zstd/common/fse_decompress.c
@@ -0,0 +1,390 @@
+/* ******************************************************************
+ * FSE : Finite State Entropy decoder
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ *
+ *  You can contact the author at :
+ *  - FSE source repository : https://github.com/Cyan4973/FiniteStateEntropy
+ *  - Public forum : https://groups.google.com/forum/#!forum/lz4c
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+****************************************************************** */
+
+
+/* **************************************************************
+*  Includes
+****************************************************************/
+#include "debug.h"      /* assert */
+#include "bitstream.h"
+#include "compiler.h"
+#define FSE_STATIC_LINKING_ONLY
+#include "fse.h"
+#include "error_private.h"
+#define ZSTD_DEPS_NEED_MALLOC
+#include "zstd_deps.h"
+
+
+/* **************************************************************
+*  Error Management
+****************************************************************/
+#define FSE_isError ERR_isError
+#define FSE_STATIC_ASSERT(c) DEBUG_STATIC_ASSERT(c)   /* use only *after* variable declarations */
+
+
+/* **************************************************************
+*  Templates
+****************************************************************/
+/*
+  designed to be included
+  for type-specific functions (template emulation in C)
+  Objective is to write these functions only once, for improved maintenance
+*/
+
+/* safety checks */
+#ifndef FSE_FUNCTION_EXTENSION
+#  error "FSE_FUNCTION_EXTENSION must be defined"
+#endif
+#ifndef FSE_FUNCTION_TYPE
+#  error "FSE_FUNCTION_TYPE must be defined"
+#endif
+
+/* Function names */
+#define FSE_CAT(X,Y) X##Y
+#define FSE_FUNCTION_NAME(X,Y) FSE_CAT(X,Y)
+#define FSE_TYPE_NAME(X,Y) FSE_CAT(X,Y)
+
+
+/* Function templates */
+FSE_DTable* FSE_createDTable (unsigned tableLog)
+{
+    if (tableLog > FSE_TABLELOG_ABSOLUTE_MAX) tableLog = FSE_TABLELOG_ABSOLUTE_MAX;
+    return (FSE_DTable*)ZSTD_malloc( FSE_DTABLE_SIZE_U32(tableLog) * sizeof (U32) );
+}
+
+void FSE_freeDTable (FSE_DTable* dt)
+{
+    ZSTD_free(dt);
+}
+
+static size_t FSE_buildDTable_internal(FSE_DTable* dt, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog, void* workSpace, size_t wkspSize)
+{
+    void* const tdPtr = dt+1;   /* because *dt is unsigned, 32-bits aligned on 32-bits */
+    FSE_DECODE_TYPE* const tableDecode = (FSE_DECODE_TYPE*) (tdPtr);
+    U16* symbolNext = (U16*)workSpace;
+    BYTE* spread = (BYTE*)(symbolNext + maxSymbolValue + 1);
+
+    U32 const maxSV1 = maxSymbolValue + 1;
+    U32 const tableSize = 1 << tableLog;
+    U32 highThreshold = tableSize-1;
+
+    /* Sanity Checks */
+    if (FSE_BUILD_DTABLE_WKSP_SIZE(tableLog, maxSymbolValue) > wkspSize) return ERROR(maxSymbolValue_tooLarge);
+    if (maxSymbolValue > FSE_MAX_SYMBOL_VALUE) return ERROR(maxSymbolValue_tooLarge);
+    if (tableLog > FSE_MAX_TABLELOG) return ERROR(tableLog_tooLarge);
+
+    /* Init, lay down lowprob symbols */
+    {   FSE_DTableHeader DTableH;
+        DTableH.tableLog = (U16)tableLog;
+        DTableH.fastMode = 1;
+        {   S16 const largeLimit= (S16)(1 << (tableLog-1));
+            U32 s;
+            for (s=0; s<maxSV1; s++) {
+                if (normalizedCounter[s]==-1) {
+                    tableDecode[highThreshold--].symbol = (FSE_FUNCTION_TYPE)s;
+                    symbolNext[s] = 1;
+                } else {
+                    if (normalizedCounter[s] >= largeLimit) DTableH.fastMode=0;
+                    symbolNext[s] = normalizedCounter[s];
+        }   }   }
+        ZSTD_memcpy(dt, &DTableH, sizeof(DTableH));
+    }
+
+    /* Spread symbols */
+    if (highThreshold == tableSize - 1) {
+        size_t const tableMask = tableSize-1;
+        size_t const step = FSE_TABLESTEP(tableSize);
+        /* First lay down the symbols in order.
+         * We use a uint64_t to lay down 8 bytes at a time. This reduces branch
+         * misses since small blocks generally have small table logs, so nearly
+         * all symbols have counts <= 8. We ensure we have 8 bytes at the end of
+         * our buffer to handle the over-write.
+         */
+        {
+            U64 const add = 0x0101010101010101ull;
+            size_t pos = 0;
+            U64 sv = 0;
+            U32 s;
+            for (s=0; s<maxSV1; ++s, sv += add) {
+                int i;
+                int const n = normalizedCounter[s];
+                MEM_write64(spread + pos, sv);
+                for (i = 8; i < n; i += 8) {
+                    MEM_write64(spread + pos + i, sv);
+                }
+                pos += n;
+            }
+        }
+        /* Now we spread those positions across the table.
+         * The benefit of doing it in two stages is that we avoid the the
+         * variable size inner loop, which caused lots of branch misses.
+         * Now we can run through all the positions without any branch misses.
+         * We unroll the loop twice, since that is what emperically worked best.
+         */
+        {
+            size_t position = 0;
+            size_t s;
+            size_t const unroll = 2;
+            assert(tableSize % unroll == 0); /* FSE_MIN_TABLELOG is 5 */
+            for (s = 0; s < (size_t)tableSize; s += unroll) {
+                size_t u;
+                for (u = 0; u < unroll; ++u) {
+                    size_t const uPosition = (position + (u * step)) & tableMask;
+                    tableDecode[uPosition].symbol = spread[s + u];
+                }
+                position = (position + (unroll * step)) & tableMask;
+            }
+            assert(position == 0);
+        }
+    } else {
+        U32 const tableMask = tableSize-1;
+        U32 const step = FSE_TABLESTEP(tableSize);
+        U32 s, position = 0;
+        for (s=0; s<maxSV1; s++) {
+            int i;
+            for (i=0; i<normalizedCounter[s]; i++) {
+                tableDecode[position].symbol = (FSE_FUNCTION_TYPE)s;
+                position = (position + step) & tableMask;
+                while (position > highThreshold) position = (position + step) & tableMask;   /* lowprob area */
+        }   }
+        if (position!=0) return ERROR(GENERIC);   /* position must reach all cells once, otherwise normalizedCounter is incorrect */
+    }
+
+    /* Build Decoding table */
+    {   U32 u;
+        for (u=0; u<tableSize; u++) {
+            FSE_FUNCTION_TYPE const symbol = (FSE_FUNCTION_TYPE)(tableDecode[u].symbol);
+            U32 const nextState = symbolNext[symbol]++;
+            tableDecode[u].nbBits = (BYTE) (tableLog - BIT_highbit32(nextState) );
+            tableDecode[u].newState = (U16) ( (nextState << tableDecode[u].nbBits) - tableSize);
+    }   }
+
+    return 0;
+}
+
+size_t FSE_buildDTable_wksp(FSE_DTable* dt, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog, void* workSpace, size_t wkspSize)
+{
+    return FSE_buildDTable_internal(dt, normalizedCounter, maxSymbolValue, tableLog, workSpace, wkspSize);
+}
+
+
+#ifndef FSE_COMMONDEFS_ONLY
+
+/*-*******************************************************
+*  Decompression (Byte symbols)
+*********************************************************/
+size_t FSE_buildDTable_rle (FSE_DTable* dt, BYTE symbolValue)
+{
+    void* ptr = dt;
+    FSE_DTableHeader* const DTableH = (FSE_DTableHeader*)ptr;
+    void* dPtr = dt + 1;
+    FSE_decode_t* const cell = (FSE_decode_t*)dPtr;
+
+    DTableH->tableLog = 0;
+    DTableH->fastMode = 0;
+
+    cell->newState = 0;
+    cell->symbol = symbolValue;
+    cell->nbBits = 0;
+
+    return 0;
+}
+
+
+size_t FSE_buildDTable_raw (FSE_DTable* dt, unsigned nbBits)
+{
+    void* ptr = dt;
+    FSE_DTableHeader* const DTableH = (FSE_DTableHeader*)ptr;
+    void* dPtr = dt + 1;
+    FSE_decode_t* const dinfo = (FSE_decode_t*)dPtr;
+    const unsigned tableSize = 1 << nbBits;
+    const unsigned tableMask = tableSize - 1;
+    const unsigned maxSV1 = tableMask+1;
+    unsigned s;
+
+    /* Sanity checks */
+    if (nbBits < 1) return ERROR(GENERIC);         /* min size */
+
+    /* Build Decoding Table */
+    DTableH->tableLog = (U16)nbBits;
+    DTableH->fastMode = 1;
+    for (s=0; s<maxSV1; s++) {
+        dinfo[s].newState = 0;
+        dinfo[s].symbol = (BYTE)s;
+        dinfo[s].nbBits = (BYTE)nbBits;
+    }
+
+    return 0;
+}
+
+FORCE_INLINE_TEMPLATE size_t FSE_decompress_usingDTable_generic(
+          void* dst, size_t maxDstSize,
+    const void* cSrc, size_t cSrcSize,
+    const FSE_DTable* dt, const unsigned fast)
+{
+    BYTE* const ostart = (BYTE*) dst;
+    BYTE* op = ostart;
+    BYTE* const omax = op + maxDstSize;
+    BYTE* const olimit = omax-3;
+
+    BIT_DStream_t bitD;
+    FSE_DState_t state1;
+    FSE_DState_t state2;
+
+    /* Init */
+    CHECK_F(BIT_initDStream(&bitD, cSrc, cSrcSize));
+
+    FSE_initDState(&state1, &bitD, dt);
+    FSE_initDState(&state2, &bitD, dt);
+
+#define FSE_GETSYMBOL(statePtr) fast ? FSE_decodeSymbolFast(statePtr, &bitD) : FSE_decodeSymbol(statePtr, &bitD)
+
+    /* 4 symbols per loop */
+    for ( ; (BIT_reloadDStream(&bitD)==BIT_DStream_unfinished) & (op<olimit) ; op+=4) {
+        op[0] = FSE_GETSYMBOL(&state1);
+
+        if (FSE_MAX_TABLELOG*2+7 > sizeof(bitD.bitContainer)*8)    /* This test must be static */
+            BIT_reloadDStream(&bitD);
+
+        op[1] = FSE_GETSYMBOL(&state2);
+
+        if (FSE_MAX_TABLELOG*4+7 > sizeof(bitD.bitContainer)*8)    /* This test must be static */
+            { if (BIT_reloadDStream(&bitD) > BIT_DStream_unfinished) { op+=2; break; } }
+
+        op[2] = FSE_GETSYMBOL(&state1);
+
+        if (FSE_MAX_TABLELOG*2+7 > sizeof(bitD.bitContainer)*8)    /* This test must be static */
+            BIT_reloadDStream(&bitD);
+
+        op[3] = FSE_GETSYMBOL(&state2);
+    }
+
+    /* tail */
+    /* note : BIT_reloadDStream(&bitD) >= FSE_DStream_partiallyFilled; Ends at exactly BIT_DStream_completed */
+    while (1) {
+        if (op>(omax-2)) return ERROR(dstSize_tooSmall);
+        *op++ = FSE_GETSYMBOL(&state1);
+        if (BIT_reloadDStream(&bitD)==BIT_DStream_overflow) {
+            *op++ = FSE_GETSYMBOL(&state2);
+            break;
+        }
+
+        if (op>(omax-2)) return ERROR(dstSize_tooSmall);
+        *op++ = FSE_GETSYMBOL(&state2);
+        if (BIT_reloadDStream(&bitD)==BIT_DStream_overflow) {
+            *op++ = FSE_GETSYMBOL(&state1);
+            break;
+    }   }
+
+    return op-ostart;
+}
+
+
+size_t FSE_decompress_usingDTable(void* dst, size_t originalSize,
+                            const void* cSrc, size_t cSrcSize,
+                            const FSE_DTable* dt)
+{
+    const void* ptr = dt;
+    const FSE_DTableHeader* DTableH = (const FSE_DTableHeader*)ptr;
+    const U32 fastMode = DTableH->fastMode;
+
+    /* select fast mode (static) */
+    if (fastMode) return FSE_decompress_usingDTable_generic(dst, originalSize, cSrc, cSrcSize, dt, 1);
+    return FSE_decompress_usingDTable_generic(dst, originalSize, cSrc, cSrcSize, dt, 0);
+}
+
+
+size_t FSE_decompress_wksp(void* dst, size_t dstCapacity, const void* cSrc, size_t cSrcSize, unsigned maxLog, void* workSpace, size_t wkspSize)
+{
+    return FSE_decompress_wksp_bmi2(dst, dstCapacity, cSrc, cSrcSize, maxLog, workSpace, wkspSize, /* bmi2 */ 0);
+}
+
+typedef struct {
+    short ncount[FSE_MAX_SYMBOL_VALUE + 1];
+    FSE_DTable dtable[1]; /* Dynamically sized */
+} FSE_DecompressWksp;
+
+
+FORCE_INLINE_TEMPLATE size_t FSE_decompress_wksp_body(
+        void* dst, size_t dstCapacity,
+        const void* cSrc, size_t cSrcSize,
+        unsigned maxLog, void* workSpace, size_t wkspSize,
+        int bmi2)
+{
+    const BYTE* const istart = (const BYTE*)cSrc;
+    const BYTE* ip = istart;
+    unsigned tableLog;
+    unsigned maxSymbolValue = FSE_MAX_SYMBOL_VALUE;
+    FSE_DecompressWksp* const wksp = (FSE_DecompressWksp*)workSpace;
+
+    DEBUG_STATIC_ASSERT((FSE_MAX_SYMBOL_VALUE + 1) % 2 == 0);
+    if (wkspSize < sizeof(*wksp)) return ERROR(GENERIC);
+
+    /* normal FSE decoding mode */
+    {
+        size_t const NCountLength = FSE_readNCount_bmi2(wksp->ncount, &maxSymbolValue, &tableLog, istart, cSrcSize, bmi2);
+        if (FSE_isError(NCountLength)) return NCountLength;
+        if (tableLog > maxLog) return ERROR(tableLog_tooLarge);
+        assert(NCountLength <= cSrcSize);
+        ip += NCountLength;
+        cSrcSize -= NCountLength;
+    }
+
+    if (FSE_DECOMPRESS_WKSP_SIZE(tableLog, maxSymbolValue) > wkspSize) return ERROR(tableLog_tooLarge);
+    workSpace = wksp->dtable + FSE_DTABLE_SIZE_U32(tableLog);
+    wkspSize -= sizeof(*wksp) + FSE_DTABLE_SIZE(tableLog);
+
+    CHECK_F( FSE_buildDTable_internal(wksp->dtable, wksp->ncount, maxSymbolValue, tableLog, workSpace, wkspSize) );
+
+    {
+        const void* ptr = wksp->dtable;
+        const FSE_DTableHeader* DTableH = (const FSE_DTableHeader*)ptr;
+        const U32 fastMode = DTableH->fastMode;
+
+        /* select fast mode (static) */
+        if (fastMode) return FSE_decompress_usingDTable_generic(dst, dstCapacity, ip, cSrcSize, wksp->dtable, 1);
+        return FSE_decompress_usingDTable_generic(dst, dstCapacity, ip, cSrcSize, wksp->dtable, 0);
+    }
+}
+
+/* Avoids the FORCE_INLINE of the _body() function. */
+static size_t FSE_decompress_wksp_body_default(void* dst, size_t dstCapacity, const void* cSrc, size_t cSrcSize, unsigned maxLog, void* workSpace, size_t wkspSize)
+{
+    return FSE_decompress_wksp_body(dst, dstCapacity, cSrc, cSrcSize, maxLog, workSpace, wkspSize, 0);
+}
+
+#if DYNAMIC_BMI2
+TARGET_ATTRIBUTE("bmi2") static size_t FSE_decompress_wksp_body_bmi2(void* dst, size_t dstCapacity, const void* cSrc, size_t cSrcSize, unsigned maxLog, void* workSpace, size_t wkspSize)
+{
+    return FSE_decompress_wksp_body(dst, dstCapacity, cSrc, cSrcSize, maxLog, workSpace, wkspSize, 1);
+}
+#endif
+
+size_t FSE_decompress_wksp_bmi2(void* dst, size_t dstCapacity, const void* cSrc, size_t cSrcSize, unsigned maxLog, void* workSpace, size_t wkspSize, int bmi2)
+{
+#if DYNAMIC_BMI2
+    if (bmi2) {
+        return FSE_decompress_wksp_body_bmi2(dst, dstCapacity, cSrc, cSrcSize, maxLog, workSpace, wkspSize);
+    }
+#endif
+    (void)bmi2;
+    return FSE_decompress_wksp_body_default(dst, dstCapacity, cSrc, cSrcSize, maxLog, workSpace, wkspSize);
+}
+
+
+typedef FSE_DTable DTable_max_t[FSE_DTABLE_SIZE_U32(FSE_MAX_TABLELOG)];
+
+
+
+#endif   /* FSE_COMMONDEFS_ONLY */
diff --git a/lib/zstd/common/huf.h b/lib/zstd/common/huf.h
new file mode 100644
index 0000000..88c5586
--- /dev/null
+++ b/lib/zstd/common/huf.h
@@ -0,0 +1,356 @@
+/* ******************************************************************
+ * huff0 huffman codec,
+ * part of Finite State Entropy library
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ *
+ * You can contact the author at :
+ * - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+****************************************************************** */
+
+
+#ifndef HUF_H_298734234
+#define HUF_H_298734234
+
+/* *** Dependencies *** */
+#include "zstd_deps.h"    /* size_t */
+
+
+/* *** library symbols visibility *** */
+/* Note : when linking with -fvisibility=hidden on gcc, or by default on Visual,
+ *        HUF symbols remain "private" (internal symbols for library only).
+ *        Set macro FSE_DLL_EXPORT to 1 if you want HUF symbols visible on DLL interface */
+#if defined(FSE_DLL_EXPORT) && (FSE_DLL_EXPORT==1) && defined(__GNUC__) && (__GNUC__ >= 4)
+#  define HUF_PUBLIC_API __attribute__ ((visibility ("default")))
+#elif defined(FSE_DLL_EXPORT) && (FSE_DLL_EXPORT==1)   /* Visual expected */
+#  define HUF_PUBLIC_API __declspec(dllexport)
+#elif defined(FSE_DLL_IMPORT) && (FSE_DLL_IMPORT==1)
+#  define HUF_PUBLIC_API __declspec(dllimport)  /* not required, just to generate faster code (saves a function pointer load from IAT and an indirect jump) */
+#else
+#  define HUF_PUBLIC_API
+#endif
+
+
+/* ========================== */
+/* ***  simple functions  *** */
+/* ========================== */
+
+/* HUF_compress() :
+ *  Compress content from buffer 'src', of size 'srcSize', into buffer 'dst'.
+ * 'dst' buffer must be already allocated.
+ *  Compression runs faster if `dstCapacity` >= HUF_compressBound(srcSize).
+ * `srcSize` must be <= `HUF_BLOCKSIZE_MAX` == 128 KB.
+ * @return : size of compressed data (<= `dstCapacity`).
+ *  Special values : if return == 0, srcData is not compressible => Nothing is stored within dst !!!
+ *                   if HUF_isError(return), compression failed (more details using HUF_getErrorName())
+ */
+HUF_PUBLIC_API size_t HUF_compress(void* dst, size_t dstCapacity,
+                             const void* src, size_t srcSize);
+
+/* HUF_decompress() :
+ *  Decompress HUF data from buffer 'cSrc', of size 'cSrcSize',
+ *  into already allocated buffer 'dst', of minimum size 'dstSize'.
+ * `originalSize` : **must** be the ***exact*** size of original (uncompressed) data.
+ *  Note : in contrast with FSE, HUF_decompress can regenerate
+ *         RLE (cSrcSize==1) and uncompressed (cSrcSize==dstSize) data,
+ *         because it knows size to regenerate (originalSize).
+ * @return : size of regenerated data (== originalSize),
+ *           or an error code, which can be tested using HUF_isError()
+ */
+HUF_PUBLIC_API size_t HUF_decompress(void* dst,  size_t originalSize,
+                               const void* cSrc, size_t cSrcSize);
+
+
+/* ***   Tool functions *** */
+#define HUF_BLOCKSIZE_MAX (128 * 1024)                  /*< maximum input size for a single block compressed with HUF_compress */
+HUF_PUBLIC_API size_t HUF_compressBound(size_t size);   /*< maximum compressed size (worst case) */
+
+/* Error Management */
+HUF_PUBLIC_API unsigned    HUF_isError(size_t code);       /*< tells if a return value is an error code */
+HUF_PUBLIC_API const char* HUF_getErrorName(size_t code);  /*< provides error code string (useful for debugging) */
+
+
+/* ***   Advanced function   *** */
+
+/* HUF_compress2() :
+ *  Same as HUF_compress(), but offers control over `maxSymbolValue` and `tableLog`.
+ * `maxSymbolValue` must be <= HUF_SYMBOLVALUE_MAX .
+ * `tableLog` must be `<= HUF_TABLELOG_MAX` . */
+HUF_PUBLIC_API size_t HUF_compress2 (void* dst, size_t dstCapacity,
+                               const void* src, size_t srcSize,
+                               unsigned maxSymbolValue, unsigned tableLog);
+
+/* HUF_compress4X_wksp() :
+ *  Same as HUF_compress2(), but uses externally allocated `workSpace`.
+ * `workspace` must have minimum alignment of 4, and be at least as large as HUF_WORKSPACE_SIZE */
+#define HUF_WORKSPACE_SIZE ((6 << 10) + 256)
+#define HUF_WORKSPACE_SIZE_U32 (HUF_WORKSPACE_SIZE / sizeof(U32))
+HUF_PUBLIC_API size_t HUF_compress4X_wksp (void* dst, size_t dstCapacity,
+                                     const void* src, size_t srcSize,
+                                     unsigned maxSymbolValue, unsigned tableLog,
+                                     void* workSpace, size_t wkspSize);
+
+#endif   /* HUF_H_298734234 */
+
+/* ******************************************************************
+ *  WARNING !!
+ *  The following section contains advanced and experimental definitions
+ *  which shall never be used in the context of a dynamic library,
+ *  because they are not guaranteed to remain stable in the future.
+ *  Only consider them in association with static linking.
+ * *****************************************************************/
+#if !defined(HUF_H_HUF_STATIC_LINKING_ONLY)
+#define HUF_H_HUF_STATIC_LINKING_ONLY
+
+/* *** Dependencies *** */
+#include "mem.h"   /* U32 */
+#define FSE_STATIC_LINKING_ONLY
+#include "fse.h"
+
+
+/* *** Constants *** */
+#define HUF_TABLELOG_MAX      12      /* max runtime value of tableLog (due to static allocation); can be modified up to HUF_ABSOLUTEMAX_TABLELOG */
+#define HUF_TABLELOG_DEFAULT  11      /* default tableLog value when none specified */
+#define HUF_SYMBOLVALUE_MAX  255
+
+#define HUF_TABLELOG_ABSOLUTEMAX  15  /* absolute limit of HUF_MAX_TABLELOG. Beyond that value, code does not work */
+#if (HUF_TABLELOG_MAX > HUF_TABLELOG_ABSOLUTEMAX)
+#  error "HUF_TABLELOG_MAX is too large !"
+#endif
+
+
+/* ****************************************
+*  Static allocation
+******************************************/
+/* HUF buffer bounds */
+#define HUF_CTABLEBOUND 129
+#define HUF_BLOCKBOUND(size) (size + (size>>8) + 8)   /* only true when incompressible is pre-filtered with fast heuristic */
+#define HUF_COMPRESSBOUND(size) (HUF_CTABLEBOUND + HUF_BLOCKBOUND(size))   /* Macro version, useful for static allocation */
+
+/* static allocation of HUF's Compression Table */
+/* this is a private definition, just exposed for allocation and strict aliasing purpose. never EVER access its members directly */
+struct HUF_CElt_s {
+  U16  val;
+  BYTE nbBits;
+};   /* typedef'd to HUF_CElt */
+typedef struct HUF_CElt_s HUF_CElt;   /* consider it an incomplete type */
+#define HUF_CTABLE_SIZE_U32(maxSymbolValue)   ((maxSymbolValue)+1)   /* Use tables of U32, for proper alignment */
+#define HUF_CTABLE_SIZE(maxSymbolValue)       (HUF_CTABLE_SIZE_U32(maxSymbolValue) * sizeof(U32))
+#define HUF_CREATE_STATIC_CTABLE(name, maxSymbolValue) \
+    HUF_CElt name[HUF_CTABLE_SIZE_U32(maxSymbolValue)] /* no final ; */
+
+/* static allocation of HUF's DTable */
+typedef U32 HUF_DTable;
+#define HUF_DTABLE_SIZE(maxTableLog)   (1 + (1<<(maxTableLog)))
+#define HUF_CREATE_STATIC_DTABLEX1(DTable, maxTableLog) \
+        HUF_DTable DTable[HUF_DTABLE_SIZE((maxTableLog)-1)] = { ((U32)((maxTableLog)-1) * 0x01000001) }
+#define HUF_CREATE_STATIC_DTABLEX2(DTable, maxTableLog) \
+        HUF_DTable DTable[HUF_DTABLE_SIZE(maxTableLog)] = { ((U32)(maxTableLog) * 0x01000001) }
+
+
+/* ****************************************
+*  Advanced decompression functions
+******************************************/
+size_t HUF_decompress4X1 (void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);   /*< single-symbol decoder */
+#ifndef HUF_FORCE_DECOMPRESS_X1
+size_t HUF_decompress4X2 (void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);   /*< double-symbols decoder */
+#endif
+
+size_t HUF_decompress4X_DCtx (HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);   /*< decodes RLE and uncompressed */
+size_t HUF_decompress4X_hufOnly(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize); /*< considers RLE and uncompressed as errors */
+size_t HUF_decompress4X_hufOnly_wksp(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize, void* workSpace, size_t wkspSize); /*< considers RLE and uncompressed as errors */
+size_t HUF_decompress4X1_DCtx(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);   /*< single-symbol decoder */
+size_t HUF_decompress4X1_DCtx_wksp(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize, void* workSpace, size_t wkspSize);   /*< single-symbol decoder */
+#ifndef HUF_FORCE_DECOMPRESS_X1
+size_t HUF_decompress4X2_DCtx(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);   /*< double-symbols decoder */
+size_t HUF_decompress4X2_DCtx_wksp(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize, void* workSpace, size_t wkspSize);   /*< double-symbols decoder */
+#endif
+
+
+/* ****************************************
+ *  HUF detailed API
+ * ****************************************/
+
+/*! HUF_compress() does the following:
+ *  1. count symbol occurrence from source[] into table count[] using FSE_count() (exposed within "fse.h")
+ *  2. (optional) refine tableLog using HUF_optimalTableLog()
+ *  3. build Huffman table from count using HUF_buildCTable()
+ *  4. save Huffman table to memory buffer using HUF_writeCTable()
+ *  5. encode the data stream using HUF_compress4X_usingCTable()
+ *
+ *  The following API allows targeting specific sub-functions for advanced tasks.
+ *  For example, it's possible to compress several blocks using the same 'CTable',
+ *  or to save and regenerate 'CTable' using external methods.
+ */
+unsigned HUF_optimalTableLog(unsigned maxTableLog, size_t srcSize, unsigned maxSymbolValue);
+size_t HUF_buildCTable (HUF_CElt* CTable, const unsigned* count, unsigned maxSymbolValue, unsigned maxNbBits);   /* @return : maxNbBits; CTable and count can overlap. In which case, CTable will overwrite count content */
+size_t HUF_writeCTable (void* dst, size_t maxDstSize, const HUF_CElt* CTable, unsigned maxSymbolValue, unsigned huffLog);
+size_t HUF_writeCTable_wksp(void* dst, size_t maxDstSize, const HUF_CElt* CTable, unsigned maxSymbolValue, unsigned huffLog, void* workspace, size_t workspaceSize);
+size_t HUF_compress4X_usingCTable(void* dst, size_t dstSize, const void* src, size_t srcSize, const HUF_CElt* CTable);
+size_t HUF_estimateCompressedSize(const HUF_CElt* CTable, const unsigned* count, unsigned maxSymbolValue);
+int HUF_validateCTable(const HUF_CElt* CTable, const unsigned* count, unsigned maxSymbolValue);
+
+typedef enum {
+   HUF_repeat_none,  /*< Cannot use the previous table */
+   HUF_repeat_check, /*< Can use the previous table but it must be checked. Note : The previous table must have been constructed by HUF_compress{1, 4}X_repeat */
+   HUF_repeat_valid  /*< Can use the previous table and it is assumed to be valid */
+ } HUF_repeat;
+/* HUF_compress4X_repeat() :
+ *  Same as HUF_compress4X_wksp(), but considers using hufTable if *repeat != HUF_repeat_none.
+ *  If it uses hufTable it does not modify hufTable or repeat.
+ *  If it doesn't, it sets *repeat = HUF_repeat_none, and it sets hufTable to the table used.
+ *  If preferRepeat then the old table will always be used if valid. */
+size_t HUF_compress4X_repeat(void* dst, size_t dstSize,
+                       const void* src, size_t srcSize,
+                       unsigned maxSymbolValue, unsigned tableLog,
+                       void* workSpace, size_t wkspSize,    /*< `workSpace` must be aligned on 4-bytes boundaries, `wkspSize` must be >= HUF_WORKSPACE_SIZE */
+                       HUF_CElt* hufTable, HUF_repeat* repeat, int preferRepeat, int bmi2);
+
+/* HUF_buildCTable_wksp() :
+ *  Same as HUF_buildCTable(), but using externally allocated scratch buffer.
+ * `workSpace` must be aligned on 4-bytes boundaries, and its size must be >= HUF_CTABLE_WORKSPACE_SIZE.
+ */
+#define HUF_CTABLE_WORKSPACE_SIZE_U32 (2*HUF_SYMBOLVALUE_MAX +1 +1)
+#define HUF_CTABLE_WORKSPACE_SIZE (HUF_CTABLE_WORKSPACE_SIZE_U32 * sizeof(unsigned))
+size_t HUF_buildCTable_wksp (HUF_CElt* tree,
+                       const unsigned* count, U32 maxSymbolValue, U32 maxNbBits,
+                             void* workSpace, size_t wkspSize);
+
+/*! HUF_readStats() :
+ *  Read compact Huffman tree, saved by HUF_writeCTable().
+ * `huffWeight` is destination buffer.
+ * @return : size read from `src` , or an error Code .
+ *  Note : Needed by HUF_readCTable() and HUF_readDTableXn() . */
+size_t HUF_readStats(BYTE* huffWeight, size_t hwSize,
+                     U32* rankStats, U32* nbSymbolsPtr, U32* tableLogPtr,
+                     const void* src, size_t srcSize);
+
+/*! HUF_readStats_wksp() :
+ * Same as HUF_readStats() but takes an external workspace which must be
+ * 4-byte aligned and its size must be >= HUF_READ_STATS_WORKSPACE_SIZE.
+ * If the CPU has BMI2 support, pass bmi2=1, otherwise pass bmi2=0.
+ */
+#define HUF_READ_STATS_WORKSPACE_SIZE_U32 FSE_DECOMPRESS_WKSP_SIZE_U32(6, HUF_TABLELOG_MAX-1)
+#define HUF_READ_STATS_WORKSPACE_SIZE (HUF_READ_STATS_WORKSPACE_SIZE_U32 * sizeof(unsigned))
+size_t HUF_readStats_wksp(BYTE* huffWeight, size_t hwSize,
+                          U32* rankStats, U32* nbSymbolsPtr, U32* tableLogPtr,
+                          const void* src, size_t srcSize,
+                          void* workspace, size_t wkspSize,
+                          int bmi2);
+
+/* HUF_readCTable() :
+ *  Loading a CTable saved with HUF_writeCTable() */
+size_t HUF_readCTable (HUF_CElt* CTable, unsigned* maxSymbolValuePtr, const void* src, size_t srcSize, unsigned *hasZeroWeights);
+
+/* HUF_getNbBits() :
+ *  Read nbBits from CTable symbolTable, for symbol `symbolValue` presumed <= HUF_SYMBOLVALUE_MAX
+ *  Note 1 : is not inlined, as HUF_CElt definition is private
+ *  Note 2 : const void* used, so that it can provide a statically allocated table as argument (which uses type U32) */
+U32 HUF_getNbBits(const void* symbolTable, U32 symbolValue);
+
+/*
+ * HUF_decompress() does the following:
+ * 1. select the decompression algorithm (X1, X2) based on pre-computed heuristics
+ * 2. build Huffman table from save, using HUF_readDTableX?()
+ * 3. decode 1 or 4 segments in parallel using HUF_decompress?X?_usingDTable()
+ */
+
+/* HUF_selectDecoder() :
+ *  Tells which decoder is likely to decode faster,
+ *  based on a set of pre-computed metrics.
+ * @return : 0==HUF_decompress4X1, 1==HUF_decompress4X2 .
+ *  Assumption : 0 < dstSize <= 128 KB */
+U32 HUF_selectDecoder (size_t dstSize, size_t cSrcSize);
+
+/*
+ *  The minimum workspace size for the `workSpace` used in
+ *  HUF_readDTableX1_wksp() and HUF_readDTableX2_wksp().
+ *
+ *  The space used depends on HUF_TABLELOG_MAX, ranging from ~1500 bytes when
+ *  HUF_TABLE_LOG_MAX=12 to ~1850 bytes when HUF_TABLE_LOG_MAX=15.
+ *  Buffer overflow errors may potentially occur if code modifications result in
+ *  a required workspace size greater than that specified in the following
+ *  macro.
+ */
+#define HUF_DECOMPRESS_WORKSPACE_SIZE ((2 << 10) + (1 << 9))
+#define HUF_DECOMPRESS_WORKSPACE_SIZE_U32 (HUF_DECOMPRESS_WORKSPACE_SIZE / sizeof(U32))
+
+#ifndef HUF_FORCE_DECOMPRESS_X2
+size_t HUF_readDTableX1 (HUF_DTable* DTable, const void* src, size_t srcSize);
+size_t HUF_readDTableX1_wksp (HUF_DTable* DTable, const void* src, size_t srcSize, void* workSpace, size_t wkspSize);
+#endif
+#ifndef HUF_FORCE_DECOMPRESS_X1
+size_t HUF_readDTableX2 (HUF_DTable* DTable, const void* src, size_t srcSize);
+size_t HUF_readDTableX2_wksp (HUF_DTable* DTable, const void* src, size_t srcSize, void* workSpace, size_t wkspSize);
+#endif
+
+size_t HUF_decompress4X_usingDTable(void* dst, size_t maxDstSize, const void* cSrc, size_t cSrcSize, const HUF_DTable* DTable);
+#ifndef HUF_FORCE_DECOMPRESS_X2
+size_t HUF_decompress4X1_usingDTable(void* dst, size_t maxDstSize, const void* cSrc, size_t cSrcSize, const HUF_DTable* DTable);
+#endif
+#ifndef HUF_FORCE_DECOMPRESS_X1
+size_t HUF_decompress4X2_usingDTable(void* dst, size_t maxDstSize, const void* cSrc, size_t cSrcSize, const HUF_DTable* DTable);
+#endif
+
+
+/* ====================== */
+/* single stream variants */
+/* ====================== */
+
+size_t HUF_compress1X (void* dst, size_t dstSize, const void* src, size_t srcSize, unsigned maxSymbolValue, unsigned tableLog);
+size_t HUF_compress1X_wksp (void* dst, size_t dstSize, const void* src, size_t srcSize, unsigned maxSymbolValue, unsigned tableLog, void* workSpace, size_t wkspSize);  /*< `workSpace` must be a table of at least HUF_WORKSPACE_SIZE_U32 unsigned */
+size_t HUF_compress1X_usingCTable(void* dst, size_t dstSize, const void* src, size_t srcSize, const HUF_CElt* CTable);
+/* HUF_compress1X_repeat() :
+ *  Same as HUF_compress1X_wksp(), but considers using hufTable if *repeat != HUF_repeat_none.
+ *  If it uses hufTable it does not modify hufTable or repeat.
+ *  If it doesn't, it sets *repeat = HUF_repeat_none, and it sets hufTable to the table used.
+ *  If preferRepeat then the old table will always be used if valid. */
+size_t HUF_compress1X_repeat(void* dst, size_t dstSize,
+                       const void* src, size_t srcSize,
+                       unsigned maxSymbolValue, unsigned tableLog,
+                       void* workSpace, size_t wkspSize,   /*< `workSpace` must be aligned on 4-bytes boundaries, `wkspSize` must be >= HUF_WORKSPACE_SIZE */
+                       HUF_CElt* hufTable, HUF_repeat* repeat, int preferRepeat, int bmi2);
+
+size_t HUF_decompress1X1 (void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);   /* single-symbol decoder */
+#ifndef HUF_FORCE_DECOMPRESS_X1
+size_t HUF_decompress1X2 (void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);   /* double-symbol decoder */
+#endif
+
+size_t HUF_decompress1X_DCtx (HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);
+size_t HUF_decompress1X_DCtx_wksp (HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize, void* workSpace, size_t wkspSize);
+#ifndef HUF_FORCE_DECOMPRESS_X2
+size_t HUF_decompress1X1_DCtx(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);   /*< single-symbol decoder */
+size_t HUF_decompress1X1_DCtx_wksp(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize, void* workSpace, size_t wkspSize);   /*< single-symbol decoder */
+#endif
+#ifndef HUF_FORCE_DECOMPRESS_X1
+size_t HUF_decompress1X2_DCtx(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize);   /*< double-symbols decoder */
+size_t HUF_decompress1X2_DCtx_wksp(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize, void* workSpace, size_t wkspSize);   /*< double-symbols decoder */
+#endif
+
+size_t HUF_decompress1X_usingDTable(void* dst, size_t maxDstSize, const void* cSrc, size_t cSrcSize, const HUF_DTable* DTable);   /*< automatic selection of sing or double symbol decoder, based on DTable */
+#ifndef HUF_FORCE_DECOMPRESS_X2
+size_t HUF_decompress1X1_usingDTable(void* dst, size_t maxDstSize, const void* cSrc, size_t cSrcSize, const HUF_DTable* DTable);
+#endif
+#ifndef HUF_FORCE_DECOMPRESS_X1
+size_t HUF_decompress1X2_usingDTable(void* dst, size_t maxDstSize, const void* cSrc, size_t cSrcSize, const HUF_DTable* DTable);
+#endif
+
+/* BMI2 variants.
+ * If the CPU has BMI2 support, pass bmi2=1, otherwise pass bmi2=0.
+ */
+size_t HUF_decompress1X_usingDTable_bmi2(void* dst, size_t maxDstSize, const void* cSrc, size_t cSrcSize, const HUF_DTable* DTable, int bmi2);
+#ifndef HUF_FORCE_DECOMPRESS_X2
+size_t HUF_decompress1X1_DCtx_wksp_bmi2(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize, void* workSpace, size_t wkspSize, int bmi2);
+#endif
+size_t HUF_decompress4X_usingDTable_bmi2(void* dst, size_t maxDstSize, const void* cSrc, size_t cSrcSize, const HUF_DTable* DTable, int bmi2);
+size_t HUF_decompress4X_hufOnly_wksp_bmi2(HUF_DTable* dctx, void* dst, size_t dstSize, const void* cSrc, size_t cSrcSize, void* workSpace, size_t wkspSize, int bmi2);
+#ifndef HUF_FORCE_DECOMPRESS_X2
+size_t HUF_readDTableX1_wksp_bmi2(HUF_DTable* DTable, const void* src, size_t srcSize, void* workSpace, size_t wkspSize, int bmi2);
+#endif
+
+#endif /* HUF_STATIC_LINKING_ONLY */
+
diff --git a/lib/zstd/common/mem.h b/lib/zstd/common/mem.h
new file mode 100644
index 0000000..dcdd586
--- /dev/null
+++ b/lib/zstd/common/mem.h
@@ -0,0 +1,259 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef MEM_H_MODULE
+#define MEM_H_MODULE
+
+/*-****************************************
+*  Dependencies
+******************************************/
+#include <asm/unaligned.h>  /* get_unaligned, put_unaligned* */
+#include <linux/compiler.h>  /* inline */
+#include <linux/swab.h>  /* swab32, swab64 */
+#include <linux/types.h>  /* size_t, ptrdiff_t */
+#include "debug.h"  /* DEBUG_STATIC_ASSERT */
+
+/*-****************************************
+*  Compiler specifics
+******************************************/
+#define MEM_STATIC static inline
+
+/*-**************************************************************
+*  Basic Types
+*****************************************************************/
+typedef uint8_t  BYTE;
+typedef uint16_t U16;
+typedef int16_t  S16;
+typedef uint32_t U32;
+typedef int32_t  S32;
+typedef uint64_t U64;
+typedef int64_t  S64;
+
+/*-**************************************************************
+*  Memory I/O API
+*****************************************************************/
+/*=== Static platform detection ===*/
+MEM_STATIC unsigned MEM_32bits(void);
+MEM_STATIC unsigned MEM_64bits(void);
+MEM_STATIC unsigned MEM_isLittleEndian(void);
+
+/*=== Native unaligned read/write ===*/
+MEM_STATIC U16 MEM_read16(const void* memPtr);
+MEM_STATIC U32 MEM_read32(const void* memPtr);
+MEM_STATIC U64 MEM_read64(const void* memPtr);
+MEM_STATIC size_t MEM_readST(const void* memPtr);
+
+MEM_STATIC void MEM_write16(void* memPtr, U16 value);
+MEM_STATIC void MEM_write32(void* memPtr, U32 value);
+MEM_STATIC void MEM_write64(void* memPtr, U64 value);
+
+/*=== Little endian unaligned read/write ===*/
+MEM_STATIC U16 MEM_readLE16(const void* memPtr);
+MEM_STATIC U32 MEM_readLE24(const void* memPtr);
+MEM_STATIC U32 MEM_readLE32(const void* memPtr);
+MEM_STATIC U64 MEM_readLE64(const void* memPtr);
+MEM_STATIC size_t MEM_readLEST(const void* memPtr);
+
+MEM_STATIC void MEM_writeLE16(void* memPtr, U16 val);
+MEM_STATIC void MEM_writeLE24(void* memPtr, U32 val);
+MEM_STATIC void MEM_writeLE32(void* memPtr, U32 val32);
+MEM_STATIC void MEM_writeLE64(void* memPtr, U64 val64);
+MEM_STATIC void MEM_writeLEST(void* memPtr, size_t val);
+
+/*=== Big endian unaligned read/write ===*/
+MEM_STATIC U32 MEM_readBE32(const void* memPtr);
+MEM_STATIC U64 MEM_readBE64(const void* memPtr);
+MEM_STATIC size_t MEM_readBEST(const void* memPtr);
+
+MEM_STATIC void MEM_writeBE32(void* memPtr, U32 val32);
+MEM_STATIC void MEM_writeBE64(void* memPtr, U64 val64);
+MEM_STATIC void MEM_writeBEST(void* memPtr, size_t val);
+
+/*=== Byteswap ===*/
+MEM_STATIC U32 MEM_swap32(U32 in);
+MEM_STATIC U64 MEM_swap64(U64 in);
+MEM_STATIC size_t MEM_swapST(size_t in);
+
+/*-**************************************************************
+*  Memory I/O Implementation
+*****************************************************************/
+MEM_STATIC unsigned MEM_32bits(void)
+{
+    return sizeof(size_t) == 4;
+}
+
+MEM_STATIC unsigned MEM_64bits(void)
+{
+    return sizeof(size_t) == 8;
+}
+
+#if defined(__LITTLE_ENDIAN)
+#define MEM_LITTLE_ENDIAN 1
+#else
+#define MEM_LITTLE_ENDIAN 0
+#endif
+
+MEM_STATIC unsigned MEM_isLittleEndian(void)
+{
+    return MEM_LITTLE_ENDIAN;
+}
+
+MEM_STATIC U16 MEM_read16(const void *memPtr)
+{
+    return get_unaligned((const U16 *)memPtr);
+}
+
+MEM_STATIC U32 MEM_read32(const void *memPtr)
+{
+    return get_unaligned((const U32 *)memPtr);
+}
+
+MEM_STATIC U64 MEM_read64(const void *memPtr)
+{
+    return get_unaligned((const U64 *)memPtr);
+}
+
+MEM_STATIC size_t MEM_readST(const void *memPtr)
+{
+    return get_unaligned((const size_t *)memPtr);
+}
+
+MEM_STATIC void MEM_write16(void *memPtr, U16 value)
+{
+    put_unaligned(value, (U16 *)memPtr);
+}
+
+MEM_STATIC void MEM_write32(void *memPtr, U32 value)
+{
+    put_unaligned(value, (U32 *)memPtr);
+}
+
+MEM_STATIC void MEM_write64(void *memPtr, U64 value)
+{
+    put_unaligned(value, (U64 *)memPtr);
+}
+
+/*=== Little endian r/w ===*/
+
+MEM_STATIC U16 MEM_readLE16(const void *memPtr)
+{
+    return get_unaligned_le16(memPtr);
+}
+
+MEM_STATIC void MEM_writeLE16(void *memPtr, U16 val)
+{
+    put_unaligned_le16(val, memPtr);
+}
+
+MEM_STATIC U32 MEM_readLE24(const void *memPtr)
+{
+    return MEM_readLE16(memPtr) + (((const BYTE *)memPtr)[2] << 16);
+}
+
+MEM_STATIC void MEM_writeLE24(void *memPtr, U32 val)
+{
+	MEM_writeLE16(memPtr, (U16)val);
+	((BYTE *)memPtr)[2] = (BYTE)(val >> 16);
+}
+
+MEM_STATIC U32 MEM_readLE32(const void *memPtr)
+{
+    return get_unaligned_le32(memPtr);
+}
+
+MEM_STATIC void MEM_writeLE32(void *memPtr, U32 val32)
+{
+    put_unaligned_le32(val32, memPtr);
+}
+
+MEM_STATIC U64 MEM_readLE64(const void *memPtr)
+{
+    return get_unaligned_le64(memPtr);
+}
+
+MEM_STATIC void MEM_writeLE64(void *memPtr, U64 val64)
+{
+    put_unaligned_le64(val64, memPtr);
+}
+
+MEM_STATIC size_t MEM_readLEST(const void *memPtr)
+{
+	if (MEM_32bits())
+		return (size_t)MEM_readLE32(memPtr);
+	else
+		return (size_t)MEM_readLE64(memPtr);
+}
+
+MEM_STATIC void MEM_writeLEST(void *memPtr, size_t val)
+{
+	if (MEM_32bits())
+		MEM_writeLE32(memPtr, (U32)val);
+	else
+		MEM_writeLE64(memPtr, (U64)val);
+}
+
+/*=== Big endian r/w ===*/
+
+MEM_STATIC U32 MEM_readBE32(const void *memPtr)
+{
+    return get_unaligned_be32(memPtr);
+}
+
+MEM_STATIC void MEM_writeBE32(void *memPtr, U32 val32)
+{
+    put_unaligned_be32(val32, memPtr);
+}
+
+MEM_STATIC U64 MEM_readBE64(const void *memPtr)
+{
+    return get_unaligned_be64(memPtr);
+}
+
+MEM_STATIC void MEM_writeBE64(void *memPtr, U64 val64)
+{
+    put_unaligned_be64(val64, memPtr);
+}
+
+MEM_STATIC size_t MEM_readBEST(const void *memPtr)
+{
+	if (MEM_32bits())
+		return (size_t)MEM_readBE32(memPtr);
+	else
+		return (size_t)MEM_readBE64(memPtr);
+}
+
+MEM_STATIC void MEM_writeBEST(void *memPtr, size_t val)
+{
+	if (MEM_32bits())
+		MEM_writeBE32(memPtr, (U32)val);
+	else
+		MEM_writeBE64(memPtr, (U64)val);
+}
+
+MEM_STATIC U32 MEM_swap32(U32 in)
+{
+    return swab32(in);
+}
+
+MEM_STATIC U64 MEM_swap64(U64 in)
+{
+    return swab64(in);
+}
+
+MEM_STATIC size_t MEM_swapST(size_t in)
+{
+    if (MEM_32bits())
+        return (size_t)MEM_swap32((U32)in);
+    else
+        return (size_t)MEM_swap64((U64)in);
+}
+
+#endif /* MEM_H_MODULE */
diff --git a/lib/zstd/common/zstd_common.c b/lib/zstd/common/zstd_common.c
new file mode 100644
index 0000000..3d7e35b
--- /dev/null
+++ b/lib/zstd/common/zstd_common.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+
+
+/*-*************************************
+*  Dependencies
+***************************************/
+#define ZSTD_DEPS_NEED_MALLOC
+#include "zstd_deps.h"   /* ZSTD_malloc, ZSTD_calloc, ZSTD_free, ZSTD_memset */
+#include "error_private.h"
+#include "zstd_internal.h"
+
+
+/*-****************************************
+*  Version
+******************************************/
+unsigned ZSTD_versionNumber(void) { return ZSTD_VERSION_NUMBER; }
+
+const char* ZSTD_versionString(void) { return ZSTD_VERSION_STRING; }
+
+
+/*-****************************************
+*  ZSTD Error Management
+******************************************/
+#undef ZSTD_isError   /* defined within zstd_internal.h */
+/*! ZSTD_isError() :
+ *  tells if a return value is an error code
+ *  symbol is required for external callers */
+unsigned ZSTD_isError(size_t code) { return ERR_isError(code); }
+
+/*! ZSTD_getErrorName() :
+ *  provides error code string from function result (useful for debugging) */
+const char* ZSTD_getErrorName(size_t code) { return ERR_getErrorName(code); }
+
+/*! ZSTD_getError() :
+ *  convert a `size_t` function result into a proper ZSTD_errorCode enum */
+ZSTD_ErrorCode ZSTD_getErrorCode(size_t code) { return ERR_getErrorCode(code); }
+
+/*! ZSTD_getErrorString() :
+ *  provides error code string from enum */
+const char* ZSTD_getErrorString(ZSTD_ErrorCode code) { return ERR_getErrorString(code); }
+
+
+
+/*=**************************************************************
+*  Custom allocator
+****************************************************************/
+void* ZSTD_customMalloc(size_t size, ZSTD_customMem customMem)
+{
+    if (customMem.customAlloc)
+        return customMem.customAlloc(customMem.opaque, size);
+    return ZSTD_malloc(size);
+}
+
+void* ZSTD_customCalloc(size_t size, ZSTD_customMem customMem)
+{
+    if (customMem.customAlloc) {
+        /* calloc implemented as malloc+memset;
+         * not as efficient as calloc, but next best guess for custom malloc */
+        void* const ptr = customMem.customAlloc(customMem.opaque, size);
+        ZSTD_memset(ptr, 0, size);
+        return ptr;
+    }
+    return ZSTD_calloc(1, size);
+}
+
+void ZSTD_customFree(void* ptr, ZSTD_customMem customMem)
+{
+    if (ptr!=NULL) {
+        if (customMem.customFree)
+            customMem.customFree(customMem.opaque, ptr);
+        else
+            ZSTD_free(ptr);
+    }
+}
diff --git a/lib/zstd/common/zstd_deps.h b/lib/zstd/common/zstd_deps.h
new file mode 100644
index 0000000..7a5bf44
--- /dev/null
+++ b/lib/zstd/common/zstd_deps.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (c) Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+/*
+ * This file provides common libc dependencies that zstd requires.
+ * The purpose is to allow replacing this file with a custom implementation
+ * to compile zstd without libc support.
+ */
+
+/* Need:
+ * NULL
+ * INT_MAX
+ * UINT_MAX
+ * ZSTD_memcpy()
+ * ZSTD_memset()
+ * ZSTD_memmove()
+ */
+#ifndef ZSTD_DEPS_COMMON
+#define ZSTD_DEPS_COMMON
+
+#include <linux/limits.h>
+#include <linux/stddef.h>
+
+#define ZSTD_memcpy(d,s,n) __builtin_memcpy((d),(s),(n))
+#define ZSTD_memmove(d,s,n) __builtin_memmove((d),(s),(n))
+#define ZSTD_memset(d,s,n) __builtin_memset((d),(s),(n))
+
+#endif /* ZSTD_DEPS_COMMON */
+
+/*
+ * Define malloc as always failing. That means the user must
+ * either use ZSTD_customMem or statically allocate memory.
+ * Need:
+ * ZSTD_malloc()
+ * ZSTD_free()
+ * ZSTD_calloc()
+ */
+#ifdef ZSTD_DEPS_NEED_MALLOC
+#ifndef ZSTD_DEPS_MALLOC
+#define ZSTD_DEPS_MALLOC
+
+#define ZSTD_malloc(s) ({ (void)(s); NULL; })
+#define ZSTD_free(p) ((void)(p))
+#define ZSTD_calloc(n,s) ({ (void)(n); (void)(s); NULL; })
+
+#endif /* ZSTD_DEPS_MALLOC */
+#endif /* ZSTD_DEPS_NEED_MALLOC */
+
+/*
+ * Provides 64-bit math support.
+ * Need:
+ * U64 ZSTD_div64(U64 dividend, U32 divisor)
+ */
+#ifdef ZSTD_DEPS_NEED_MATH64
+#ifndef ZSTD_DEPS_MATH64
+#define ZSTD_DEPS_MATH64
+
+#include <linux/math64.h>
+
+static uint64_t ZSTD_div64(uint64_t dividend, uint32_t divisor) {
+  return div_u64(dividend, divisor);
+}
+
+#endif /* ZSTD_DEPS_MATH64 */
+#endif /* ZSTD_DEPS_NEED_MATH64 */
+
+/*
+ * This is only requested when DEBUGLEVEL >= 1, meaning
+ * it is disabled in production.
+ * Need:
+ * assert()
+ */
+#ifdef ZSTD_DEPS_NEED_ASSERT
+#ifndef ZSTD_DEPS_ASSERT
+#define ZSTD_DEPS_ASSERT
+
+#include <linux/kernel.h>
+
+#define assert(x) WARN_ON((x))
+
+#endif /* ZSTD_DEPS_ASSERT */
+#endif /* ZSTD_DEPS_NEED_ASSERT */
+
+/*
+ * This is only requested when DEBUGLEVEL >= 2, meaning
+ * it is disabled in production.
+ * Need:
+ * ZSTD_DEBUG_PRINT()
+ */
+#ifdef ZSTD_DEPS_NEED_IO
+#ifndef ZSTD_DEPS_IO
+#define ZSTD_DEPS_IO
+
+#include <linux/printk.h>
+
+#define ZSTD_DEBUG_PRINT(...) pr_debug(__VA_ARGS__)
+
+#endif /* ZSTD_DEPS_IO */
+#endif /* ZSTD_DEPS_NEED_IO */
+
+/*
+ * Only requested when MSAN is enabled.
+ * Need:
+ * intptr_t
+ */
+#ifdef ZSTD_DEPS_NEED_STDINT
+#ifndef ZSTD_DEPS_STDINT
+#define ZSTD_DEPS_STDINT
+
+/*
+ * The Linux Kernel doesn't provide intptr_t, only uintptr_t, which
+ * is an unsigned long.
+ */
+typedef long intptr_t;
+
+#endif /* ZSTD_DEPS_STDINT */
+#endif /* ZSTD_DEPS_NEED_STDINT */
diff --git a/lib/zstd/common/zstd_internal.h b/lib/zstd/common/zstd_internal.h
new file mode 100644
index 0000000..fc6f3a9
--- /dev/null
+++ b/lib/zstd/common/zstd_internal.h
@@ -0,0 +1,450 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_CCOMMON_H_MODULE
+#define ZSTD_CCOMMON_H_MODULE
+
+/* this module contains definitions which must be identical
+ * across compression, decompression and dictBuilder.
+ * It also contains a few functions useful to at least 2 of them
+ * and which benefit from being inlined */
+
+/*-*************************************
+*  Dependencies
+***************************************/
+#include "compiler.h"
+#include "mem.h"
+#include "debug.h"                 /* assert, DEBUGLOG, RAWLOG, g_debuglevel */
+#include "error_private.h"
+#define ZSTD_STATIC_LINKING_ONLY
+#include <linux/zstd.h>
+#define FSE_STATIC_LINKING_ONLY
+#include "fse.h"
+#define HUF_STATIC_LINKING_ONLY
+#include "huf.h"
+#include <linux/xxhash.h>                /* XXH_reset, update, digest */
+#define ZSTD_TRACE 0
+
+
+/* ---- static assert (debug) --- */
+#define ZSTD_STATIC_ASSERT(c) DEBUG_STATIC_ASSERT(c)
+#define ZSTD_isError ERR_isError   /* for inlining */
+#define FSE_isError  ERR_isError
+#define HUF_isError  ERR_isError
+
+
+/*-*************************************
+*  shared macros
+***************************************/
+#undef MIN
+#undef MAX
+#define MIN(a,b) ((a)<(b) ? (a) : (b))
+#define MAX(a,b) ((a)>(b) ? (a) : (b))
+
+/*
+ * Ignore: this is an internal helper.
+ *
+ * This is a helper function to help force C99-correctness during compilation.
+ * Under strict compilation modes, variadic macro arguments can't be empty.
+ * However, variadic function arguments can be. Using a function therefore lets
+ * us statically check that at least one (string) argument was passed,
+ * independent of the compilation flags.
+ */
+static INLINE_KEYWORD UNUSED_ATTR
+void _force_has_format_string(const char *format, ...) {
+  (void)format;
+}
+
+/*
+ * Ignore: this is an internal helper.
+ *
+ * We want to force this function invocation to be syntactically correct, but
+ * we don't want to force runtime evaluation of its arguments.
+ */
+#define _FORCE_HAS_FORMAT_STRING(...) \
+  if (0) { \
+    _force_has_format_string(__VA_ARGS__); \
+  }
+
+/*
+ * Return the specified error if the condition evaluates to true.
+ *
+ * In debug modes, prints additional information.
+ * In order to do that (particularly, printing the conditional that failed),
+ * this can't just wrap RETURN_ERROR().
+ */
+#define RETURN_ERROR_IF(cond, err, ...) \
+  if (cond) { \
+    RAWLOG(3, "%s:%d: ERROR!: check %s failed, returning %s", \
+           __FILE__, __LINE__, ZSTD_QUOTE(cond), ZSTD_QUOTE(ERROR(err))); \
+    _FORCE_HAS_FORMAT_STRING(__VA_ARGS__); \
+    RAWLOG(3, ": " __VA_ARGS__); \
+    RAWLOG(3, "\n"); \
+    return ERROR(err); \
+  }
+
+/*
+ * Unconditionally return the specified error.
+ *
+ * In debug modes, prints additional information.
+ */
+#define RETURN_ERROR(err, ...) \
+  do { \
+    RAWLOG(3, "%s:%d: ERROR!: unconditional check failed, returning %s", \
+           __FILE__, __LINE__, ZSTD_QUOTE(ERROR(err))); \
+    _FORCE_HAS_FORMAT_STRING(__VA_ARGS__); \
+    RAWLOG(3, ": " __VA_ARGS__); \
+    RAWLOG(3, "\n"); \
+    return ERROR(err); \
+  } while(0);
+
+/*
+ * If the provided expression evaluates to an error code, returns that error code.
+ *
+ * In debug modes, prints additional information.
+ */
+#define FORWARD_IF_ERROR(err, ...) \
+  do { \
+    size_t const err_code = (err); \
+    if (ERR_isError(err_code)) { \
+      RAWLOG(3, "%s:%d: ERROR!: forwarding error in %s: %s", \
+             __FILE__, __LINE__, ZSTD_QUOTE(err), ERR_getErrorName(err_code)); \
+      _FORCE_HAS_FORMAT_STRING(__VA_ARGS__); \
+      RAWLOG(3, ": " __VA_ARGS__); \
+      RAWLOG(3, "\n"); \
+      return err_code; \
+    } \
+  } while(0);
+
+
+/*-*************************************
+*  Common constants
+***************************************/
+#define ZSTD_OPT_NUM    (1<<12)
+
+#define ZSTD_REP_NUM      3                 /* number of repcodes */
+#define ZSTD_REP_MOVE     (ZSTD_REP_NUM-1)
+static UNUSED_ATTR const U32 repStartValue[ZSTD_REP_NUM] = { 1, 4, 8 };
+
+#define KB *(1 <<10)
+#define MB *(1 <<20)
+#define GB *(1U<<30)
+
+#define BIT7 128
+#define BIT6  64
+#define BIT5  32
+#define BIT4  16
+#define BIT1   2
+#define BIT0   1
+
+#define ZSTD_WINDOWLOG_ABSOLUTEMIN 10
+static UNUSED_ATTR const size_t ZSTD_fcs_fieldSize[4] = { 0, 2, 4, 8 };
+static UNUSED_ATTR const size_t ZSTD_did_fieldSize[4] = { 0, 1, 2, 4 };
+
+#define ZSTD_FRAMEIDSIZE 4   /* magic number size */
+
+#define ZSTD_BLOCKHEADERSIZE 3   /* C standard doesn't allow `static const` variable to be init using another `static const` variable */
+static UNUSED_ATTR const size_t ZSTD_blockHeaderSize = ZSTD_BLOCKHEADERSIZE;
+typedef enum { bt_raw, bt_rle, bt_compressed, bt_reserved } blockType_e;
+
+#define ZSTD_FRAMECHECKSUMSIZE 4
+
+#define MIN_SEQUENCES_SIZE 1 /* nbSeq==0 */
+#define MIN_CBLOCK_SIZE (1 /*litCSize*/ + 1 /* RLE or RAW */ + MIN_SEQUENCES_SIZE /* nbSeq==0 */)   /* for a non-null block */
+
+#define HufLog 12
+typedef enum { set_basic, set_rle, set_compressed, set_repeat } symbolEncodingType_e;
+
+#define LONGNBSEQ 0x7F00
+
+#define MINMATCH 3
+
+#define Litbits  8
+#define MaxLit ((1<<Litbits) - 1)
+#define MaxML   52
+#define MaxLL   35
+#define DefaultMaxOff 28
+#define MaxOff  31
+#define MaxSeq MAX(MaxLL, MaxML)   /* Assumption : MaxOff < MaxLL,MaxML */
+#define MLFSELog    9
+#define LLFSELog    9
+#define OffFSELog   8
+#define MaxFSELog  MAX(MAX(MLFSELog, LLFSELog), OffFSELog)
+
+#define ZSTD_MAX_HUF_HEADER_SIZE 128 /* header + <= 127 byte tree description */
+/* Each table cannot take more than #symbols * FSELog bits */
+#define ZSTD_MAX_FSE_HEADERS_SIZE (((MaxML + 1) * MLFSELog + (MaxLL + 1) * LLFSELog + (MaxOff + 1) * OffFSELog + 7) / 8)
+
+static UNUSED_ATTR const U32 LL_bits[MaxLL+1] = {
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     1, 1, 1, 1, 2, 2, 3, 3,
+     4, 6, 7, 8, 9,10,11,12,
+    13,14,15,16
+};
+static UNUSED_ATTR const S16 LL_defaultNorm[MaxLL+1] = {
+     4, 3, 2, 2, 2, 2, 2, 2,
+     2, 2, 2, 2, 2, 1, 1, 1,
+     2, 2, 2, 2, 2, 2, 2, 2,
+     2, 3, 2, 1, 1, 1, 1, 1,
+    -1,-1,-1,-1
+};
+#define LL_DEFAULTNORMLOG 6  /* for static allocation */
+static UNUSED_ATTR const U32 LL_defaultNormLog = LL_DEFAULTNORMLOG;
+
+static UNUSED_ATTR const U32 ML_bits[MaxML+1] = {
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     1, 1, 1, 1, 2, 2, 3, 3,
+     4, 4, 5, 7, 8, 9,10,11,
+    12,13,14,15,16
+};
+static UNUSED_ATTR const S16 ML_defaultNorm[MaxML+1] = {
+     1, 4, 3, 2, 2, 2, 2, 2,
+     2, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1,-1,-1,
+    -1,-1,-1,-1,-1
+};
+#define ML_DEFAULTNORMLOG 6  /* for static allocation */
+static UNUSED_ATTR const U32 ML_defaultNormLog = ML_DEFAULTNORMLOG;
+
+static UNUSED_ATTR const S16 OF_defaultNorm[DefaultMaxOff+1] = {
+     1, 1, 1, 1, 1, 1, 2, 2,
+     2, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+    -1,-1,-1,-1,-1
+};
+#define OF_DEFAULTNORMLOG 5  /* for static allocation */
+static UNUSED_ATTR const U32 OF_defaultNormLog = OF_DEFAULTNORMLOG;
+
+
+/*-*******************************************
+*  Shared functions to include for inlining
+*********************************************/
+static void ZSTD_copy8(void* dst, const void* src) {
+    ZSTD_memcpy(dst, src, 8);
+}
+
+#define COPY8(d,s) { ZSTD_copy8(d,s); d+=8; s+=8; }
+static void ZSTD_copy16(void* dst, const void* src) {
+    ZSTD_memcpy(dst, src, 16);
+}
+#define COPY16(d,s) { ZSTD_copy16(d,s); d+=16; s+=16; }
+
+#define WILDCOPY_OVERLENGTH 32
+#define WILDCOPY_VECLEN 16
+
+typedef enum {
+    ZSTD_no_overlap,
+    ZSTD_overlap_src_before_dst
+    /*  ZSTD_overlap_dst_before_src, */
+} ZSTD_overlap_e;
+
+/*! ZSTD_wildcopy() :
+ *  Custom version of ZSTD_memcpy(), can over read/write up to WILDCOPY_OVERLENGTH bytes (if length==0)
+ *  @param ovtype controls the overlap detection
+ *         - ZSTD_no_overlap: The source and destination are guaranteed to be at least WILDCOPY_VECLEN bytes apart.
+ *         - ZSTD_overlap_src_before_dst: The src and dst may overlap, but they MUST be at least 8 bytes apart.
+ *           The src buffer must be before the dst buffer.
+ */
+MEM_STATIC FORCE_INLINE_ATTR
+void ZSTD_wildcopy(void* dst, const void* src, ptrdiff_t length, ZSTD_overlap_e const ovtype)
+{
+    ptrdiff_t diff = (BYTE*)dst - (const BYTE*)src;
+    const BYTE* ip = (const BYTE*)src;
+    BYTE* op = (BYTE*)dst;
+    BYTE* const oend = op + length;
+
+    assert(diff >= 8 || (ovtype == ZSTD_no_overlap && diff <= -WILDCOPY_VECLEN));
+
+    if (ovtype == ZSTD_overlap_src_before_dst && diff < WILDCOPY_VECLEN) {
+        /* Handle short offset copies. */
+        do {
+            COPY8(op, ip)
+        } while (op < oend);
+    } else {
+        assert(diff >= WILDCOPY_VECLEN || diff <= -WILDCOPY_VECLEN);
+        /* Separate out the first COPY16() call because the copy length is
+         * almost certain to be short, so the branches have different
+         * probabilities. Since it is almost certain to be short, only do
+         * one COPY16() in the first call. Then, do two calls per loop since
+         * at that point it is more likely to have a high trip count.
+         */
+#ifdef __aarch64__
+        do {
+            COPY16(op, ip);
+        }
+        while (op < oend);
+#else
+        ZSTD_copy16(op, ip);
+        if (16 >= length) return;
+        op += 16;
+        ip += 16;
+        do {
+            COPY16(op, ip);
+            COPY16(op, ip);
+        }
+        while (op < oend);
+#endif
+    }
+}
+
+MEM_STATIC size_t ZSTD_limitCopy(void* dst, size_t dstCapacity, const void* src, size_t srcSize)
+{
+    size_t const length = MIN(dstCapacity, srcSize);