blob: 6d853f5a2c074f38aa070fd76bbf4cef2ae314ca [file] [log] [blame]
# $Id: config.in,v 1.111 2001/06/01 08:12:10 davem Exp $
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
mainmenu_name "Linux/SPARC Kernel Configuration"
define_bool CONFIG_UID16 y
define_bool CONFIG_HIGHMEM y
mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu
mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
bool ' Set version information on all symbols for modules' CONFIG_MODVERSIONS
bool ' Kernel module loader' CONFIG_KMOD
fi
endmenu
mainmenu_option next_comment
comment 'General setup'
define_bool CONFIG_VT y
define_bool CONFIG_VT_CONSOLE y
bool 'Symmetric multi-processing support (does not work on sun4/sun4c)' CONFIG_SMP
if [ "$CONFIG_SMP" = "y" ]; then
int 'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
fi
# Identify this as a Sparc32 build
define_bool CONFIG_SPARC32 y
# Global things across all Sun machines.
define_bool CONFIG_ISA n
define_bool CONFIG_EISA n
define_bool CONFIG_MCA n
define_bool CONFIG_PCMCIA n
define_bool CONFIG_SBUS y
define_bool CONFIG_SBUSCHAR y
define_bool CONFIG_BUSMOUSE y
define_bool CONFIG_SUN_MOUSE y
define_bool CONFIG_SERIAL y
define_bool CONFIG_SUN_SERIAL y
define_bool CONFIG_SERIAL_CONSOLE y
define_bool CONFIG_SUN_KEYBOARD y
define_bool CONFIG_SUN_CONSOLE y
define_bool CONFIG_SUN_AUXIO y
define_bool CONFIG_SUN_IO y
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
define_bool CONFIG_SUN_PM y
bool 'Support for SUN4 machines (disables SUN4[CDM] support)' CONFIG_SUN4
if [ "$CONFIG_SUN4" != "y" ]; then
bool 'Support for PCI and PS/2 keyboard/mouse' CONFIG_PCI
source drivers/pci/Config.in
else
define_bool CONFIG_PCI n
fi
tristate 'Openprom tree appears in /proc/openprom' CONFIG_SUN_OPENPROMFS
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
if [ "$CONFIG_PROC_FS" = "y" ]; then
define_bool CONFIG_KCORE_ELF y
fi
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
bool 'SunOS binary emulation' CONFIG_SUNOS_EMUL
bool 'Select task to kill on out of memory condition' CONFIG_OOM_KILLER
source drivers/parport/Config.in
dep_tristate ' Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
endmenu
mainmenu_option next_comment
comment 'Console drivers'
bool 'PROM console' CONFIG_PROM_CONSOLE
source drivers/video/Config.in
endmenu
source drivers/mtd/Config.in
if [ "$CONFIG_SUN4" != "y" ]; then
source drivers/sbus/char/Config.in
source drivers/sbus/audio/Config.in
fi
mainmenu_option next_comment
comment 'Block devices'
bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD
tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
dep_tristate 'Network block device support' CONFIG_BLK_DEV_NBD $CONFIG_NET
source drivers/md/Config.in
tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
if [ "$CONFIG_BLK_DEV_RAM" = "y" -o "$CONFIG_BLK_DEV_RAM" = "m" ]; then
int ' Default RAM disk size' CONFIG_BLK_DEV_RAM_SIZE 4096
fi
dep_bool ' Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD $CONFIG_BLK_DEV_RAM
endmenu
if [ "$CONFIG_NET" = "y" ]; then
source net/Config.in
fi
# Don't frighten a common SBus user
if [ "$CONFIG_PCI" = "y" ]; then
mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
else
define_bool CONFIG_IDE n
define_bool CONFIG_BLK_DEV_HD n
fi
mainmenu_option next_comment
comment 'ISDN subsystem'
tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
source drivers/isdn/Config.in
fi
endmenu
mainmenu_option next_comment
comment 'SCSI support'
tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
comment 'SCSI support type (disk, tape, CDrom)'
dep_tristate ' SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
if [ "$CONFIG_BLK_DEV_SD" != "n" ]; then
int 'Maximum number of SCSI disks that can be loaded as modules' CONFIG_SD_EXTRA_DEVS 40
fi
dep_tristate ' SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
dep_tristate ' SCSI OnStream SC-x0 tape support' CONFIG_CHR_DEV_OSST $CONFIG_SCSI
dep_tristate ' SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
bool ' Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
int 'Maximum number of CDROM devices that can be loaded as modules' CONFIG_SR_EXTRA_DEVS 2
fi
dep_tristate ' SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
bool ' Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
bool ' Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
bool ' SCSI logging facility' CONFIG_SCSI_LOGGING
mainmenu_option next_comment
comment 'SCSI low-level drivers'
dep_tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
dep_tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
endmenu
fi
endmenu
source drivers/fc4/Config.in
if [ "$CONFIG_NET" = "y" ]; then
mainmenu_option next_comment
comment 'Network device support'
bool 'Network device support' CONFIG_NETDEVICES
if [ "$CONFIG_NETDEVICES" = "y" ]; then
tristate ' Dummy net driver support' CONFIG_DUMMY
tristate ' Bonding driver support' CONFIG_BONDING
tristate ' Universal TUN/TAP device driver support' CONFIG_TUN
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
if [ "$CONFIG_NETLINK" = "y" ]; then
tristate ' Ethertap network tap (OBSOLETE)' CONFIG_ETHERTAP
fi
fi
tristate ' PPP (point-to-point protocol) support' CONFIG_PPP
if [ ! "$CONFIG_PPP" = "n" ]; then
dep_tristate ' PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP
dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP m
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
dep_tristate ' PPP over ATM (EXPERIMENTAL)' CONFIG_PPPOATM $CONFIG_PPP $CONFIG_ATM
fi
fi
fi
tristate ' SLIP (serial line) support' CONFIG_SLIP
if [ "$CONFIG_SLIP" != "n" ]; then
bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
bool ' Keepalive and linefill' CONFIG_SLIP_SMART
bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
fi
tristate ' Sun LANCE support' CONFIG_SUNLANCE
tristate ' Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
tristate ' Sun BigMAC 10/100baseT support (EXPERIMENTAL)' CONFIG_SUNBMAC
fi
tristate ' Sun QuadEthernet support' CONFIG_SUNQE
tristate ' MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS
if [ "$CONFIG_PCI" = "y" ]; then
tristate '3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX
fi
# bool ' FDDI driver support' CONFIG_FDDI
# if [ "$CONFIG_FDDI" = "y" ]; then
# fi
if [ "$CONFIG_ATM" != "n" ]; then
source drivers/atm/Config.in
fi
fi
endmenu
fi
# This one must be before the filesystem configs. -DaveM
mainmenu_option next_comment
comment 'Unix98 PTY support'
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi
endmenu
source fs/Config.in
source net/bluetooth/Config.in
mainmenu_option next_comment
comment 'Watchdog'
tristate 'Software watchdog' CONFIG_SOFT_WATCHDOG
endmenu
mainmenu_option next_comment
comment 'Kernel hacking'
bool 'Kernel debugging' CONFIG_DEBUG_KERNEL
if [ "$CONFIG_DEBUG_KERNEL" != "n" ]; then
bool ' Debug high memory support' CONFIG_DEBUG_HIGHMEM
bool ' Debug memory allocations' CONFIG_DEBUG_SLAB
bool ' Memory mapped I/O debugging' CONFIG_DEBUG_IOVIRT
bool ' Magic SysRq key' CONFIG_MAGIC_SYSRQ
bool ' Spinlock debugging' CONFIG_DEBUG_SPINLOCK
fi
int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0
endmenu
source crypto/Config.in
source lib/Config.in