| # |
| # For a description of the syntax of this configuration file, |
| # see Documentation/kbuild/config-language.txt. |
| # |
| mainmenu_name "Linux Kernel Configuration" |
| |
| define_bool CONFIG_X86_64 y |
| |
| define_bool CONFIG_X86 y |
| define_bool CONFIG_ISA n |
| define_bool CONFIG_SBUS n |
| |
| define_bool CONFIG_UID16 n |
| define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y |
| define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n |
| define_bool CONFIG_X86_CMPXCHG y |
| define_bool CONFIG_EARLY_PRINTK y |
| |
| mainmenu_option next_comment |
| comment 'Code maturity level options' |
| bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL |
| endmenu |
| |
| mainmenu_option next_comment |
| comment 'Loadable module support' |
| bool 'Enable loadable module support' CONFIG_MODULES |
| if [ "$CONFIG_MODULES" = "y" ]; then |
| bool ' Set version information on all module symbols' CONFIG_MODVERSIONS |
| bool ' Kernel module loader' CONFIG_KMOD |
| fi |
| endmenu |
| |
| mainmenu_option next_comment |
| comment 'Processor type and features' |
| choice 'Processor family' \ |
| "AMD-Hammer CONFIG_MK8 \ |
| Intel-x86-64 CONFIG_MPSC \ |
| Generic-x86-64 CONFIG_GENERIC_CPU" AMD-Hammer |
| |
| # |
| # Define implied options from the CPU selection here |
| # |
| if [ "$CONFIG_GENERIC_CPU" = "y" -o "$CONFIG_MPSC" = "y" ]; then |
| define_int CONFIG_X86_L1_CACHE_BYTES 128 |
| define_int CONFIG_X86_L1_CACHE_SHIFT 7 |
| else |
| define_int CONFIG_X86_L1_CACHE_BYTES 64 |
| define_int CONFIG_X86_L1_CACHE_SHIFT 6 |
| fi |
| define_bool CONFIG_X86_TSC y |
| define_bool CONFIG_X86_GOOD_APIC y |
| |
| tristate '/dev/cpu/*/msr - Model-specific register support' CONFIG_X86_MSR |
| tristate '/dev/cpu/*/cpuid - CPU information support' CONFIG_X86_CPUID |
| |
| define_bool CONFIG_MATH_EMULATION n |
| define_bool CONFIG_MCA n |
| define_bool CONFIG_EISA n |
| |
| define_bool CONFIG_X86_IO_APIC y |
| define_bool CONFIG_X86_LOCAL_APIC y |
| |
| bool 'MTRR (Memory Type Range Register) support' CONFIG_MTRR |
| bool 'Symmetric multi-processing support' CONFIG_SMP |
| bool 'HPET timers' CONFIG_HPET_TIMER |
| bool 'IOMMU support' CONFIG_GART_IOMMU |
| if [ "$CONFIG_GART_IOMMU" = "y" ]; then |
| bool 'SWIOTLB support' CONFIG_SWIOTLB |
| fi |
| |
| if [ "$CONFIG_GART_IOMMU" != "y" ]; then |
| define_bool CONFIG_DUMMY_IOMMU y |
| fi |
| if [ "$CONFIG_SMP" != "y" ]; then |
| define_bool CONFIG_X86_UP_IOAPIC y |
| else |
| define_bool CONFIG_HAVE_DEC_LOCK y |
| int 'Maximum number of CPUs (2-8)' CONFIG_NR_CPUS 4 |
| fi |
| |
| bool 'Machine check support' CONFIG_MCE |
| if [ "$CONFIG_SMP" = "y" ]; then |
| bool 'K8 NUMA support' CONFIG_K8_NUMA |
| if [ "$CONFIG_K8_NUMA" = "y" ]; then |
| define_bool CONFIG_DISCONTIGMEM y |
| define_bool CONFIG_NUMA y |
| fi |
| fi |
| |
| endmenu |
| |
| mainmenu_option next_comment |
| comment 'General setup' |
| |
| bool 'Networking support' CONFIG_NET |
| bool 'PCI support' CONFIG_PCI |
| if [ "$CONFIG_PCI" = "y" ]; then |
| define_bool CONFIG_PCI_DIRECT y |
| fi |
| |
| source drivers/pci/Config.in |
| |
| bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG |
| |
| if [ "$CONFIG_HOTPLUG" = "y" ] ; then |
| source drivers/pcmcia/Config.in |
| source drivers/hotplug/Config.in |
| else |
| define_bool CONFIG_PCMCIA n |
| define_bool CONFIG_HOTPLUG_PCI n |
| fi |
| |
| bool 'System V IPC' CONFIG_SYSVIPC |
| bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT |
| bool 'Sysctl support' CONFIG_SYSCTL |
| if [ "$CONFIG_PROC_FS" = "y" ]; then |
| define_bool CONFIG_KCORE_ELF y |
| fi |
| #tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT |
| bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF |
| tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC |
| |
| bool 'Power Management support' CONFIG_PM |
| |
| bool 'IA32 Emulation' CONFIG_IA32_EMULATION |
| |
| source drivers/acpi/Config.in |
| |
| endmenu |
| |
| source drivers/mtd/Config.in |
| |
| source drivers/parport/Config.in |
| |
| source drivers/block/Config.in |
| |
| source drivers/md/Config.in |
| |
| if [ "$CONFIG_NET" = "y" ]; then |
| source net/Config.in |
| fi |
| |
| source drivers/telephony/Config.in |
| |
| mainmenu_option next_comment |
| comment 'ATA/IDE/MFM/RLL support' |
| |
| tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE |
| |
| if [ "$CONFIG_IDE" != "n" ]; then |
| source drivers/ide/Config.in |
| else |
| define_bool CONFIG_BLK_DEV_IDE_MODES n |
| define_bool CONFIG_BLK_DEV_HD n |
| fi |
| endmenu |
| |
| mainmenu_option next_comment |
| comment 'SCSI support' |
| |
| tristate 'SCSI support' CONFIG_SCSI |
| |
| if [ "$CONFIG_SCSI" != "n" ]; then |
| source drivers/scsi/Config.in |
| fi |
| endmenu |
| |
| source drivers/message/fusion/Config.in |
| |
| source drivers/ieee1394/Config.in |
| |
| #Currently not 64bit safe |
| #source drivers/message/i2o/Config.in |
| |
| if [ "$CONFIG_NET" = "y" ]; then |
| mainmenu_option next_comment |
| comment 'Network device support' |
| |
| bool 'Network device support' CONFIG_NETDEVICES |
| if [ "$CONFIG_NETDEVICES" = "y" ]; then |
| source drivers/net/Config.in |
| # seems to be largely not 64bit safe |
| # if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then |
| # source drivers/atm/Config.in |
| # fi |
| fi |
| endmenu |
| fi |
| |
| source net/ax25/Config.in |
| |
| source net/irda/Config.in |
| |
| mainmenu_option next_comment |
| comment 'ISDN subsystem' |
| if [ "$CONFIG_NET" != "n" ]; then |
| tristate 'ISDN support' CONFIG_ISDN |
| if [ "$CONFIG_ISDN" != "n" ]; then |
| source drivers/isdn/Config.in |
| fi |
| fi |
| endmenu |
| |
| # |
| # input before char - char/joystick depends on it. As does USB. |
| # |
| source drivers/input/Config.in |
| source drivers/char/Config.in |
| |
| |
| #source drivers/misc/Config.in |
| |
| source drivers/media/Config.in |
| |
| source fs/Config.in |
| |
| if [ "$CONFIG_VT" = "y" ]; then |
| mainmenu_option next_comment |
| comment 'Console drivers' |
| bool 'VGA text console' CONFIG_VGA_CONSOLE |
| bool 'Video mode selection support' CONFIG_VIDEO_SELECT |
| if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then |
| tristate 'MDA text console (dual-headed) (EXPERIMENTAL)' CONFIG_MDA_CONSOLE |
| source drivers/video/Config.in |
| fi |
| endmenu |
| fi |
| |
| mainmenu_option next_comment |
| comment 'Sound' |
| |
| tristate 'Sound card support' CONFIG_SOUND |
| if [ "$CONFIG_SOUND" != "n" ]; then |
| source drivers/sound/Config.in |
| fi |
| endmenu |
| |
| source drivers/usb/Config.in |
| |
| source net/bluetooth/Config.in |
| |
| source crypto/Config.in |
| |
| mainmenu_option next_comment |
| comment 'Kernel hacking' |
| |
| bool 'Kernel debugging' CONFIG_DEBUG_KERNEL |
| if [ "$CONFIG_DEBUG_KERNEL" != "n" ]; then |
| bool ' Debug memory allocations' CONFIG_DEBUG_SLAB |
| # bool ' Memory mapped I/O debugging' CONFIG_DEBUG_IOVIRT |
| bool ' Magic SysRq key' CONFIG_MAGIC_SYSRQ |
| bool ' Spinlock debugging' CONFIG_DEBUG_SPINLOCK |
| bool ' Additional run-time checks' CONFIG_CHECKING |
| bool ' Debug __init statements' CONFIG_INIT_DEBUG |
| bool ' IOMMU debugging' CONFIG_IOMMU_DEBUG |
| bool ' IOMMU leak tracing' CONFIG_IOMMU_LEAK |
| bool ' Probalistic stack overflow check' CONFIG_DEBUG_STACKOVERFLOW |
| fi |
| |
| int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0 |
| |
| endmenu |
| |
| source lib/Config.in |