| /* |
| * NCR53c406.c |
| * Low-level SCSI driver for NCR53c406a chip. |
| * Copyright (C) 1994, 1995, 1996 Normunds Saumanis (normunds@fi.ibm.com) |
| * |
| * LILO command line usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]] |
| * Specify IRQ = 0 for non-interrupt driven mode. |
| * FASTPIO = 1 for fast pio mode, 0 for slow mode. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| */ |
| |
| #define NCR53C406A_DEBUG 0 |
| #define VERBOSE_NCR53C406A_DEBUG 0 |
| |
| /* Set this to 1 for PIO mode (recommended) or to 0 for DMA mode */ |
| #define USE_PIO 1 |
| |
| #define USE_BIOS 0 |
| /* #define BIOS_ADDR 0xD8000 */ /* define this if autoprobe fails */ |
| /* #define PORT_BASE 0x330 */ /* define this if autoprobe fails */ |
| /* #define IRQ_LEV 0 */ /* define this if autoprobe fails */ |
| #define DMA_CHAN 5 /* this is ignored if DMA is disabled */ |
| |
| /* Set this to 0 if you encounter kernel lockups while transferring |
| * data in PIO mode */ |
| #define USE_FAST_PIO 1 |
| |
| /* ============= End of user configurable parameters ============= */ |
| |
| #include <linux/module.h> |
| |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/proc_fs.h> |
| #include <linux/stat.h> |
| #include <linux/init.h> |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| #include <asm/bitops.h> |
| #include <asm/irq.h> |
| |
| #include <linux/blk.h> |
| #include <linux/spinlock.h> |
| #include "scsi.h" |
| #include "hosts.h" |
| #include "sd.h" |
| |
| #include "NCR53c406a.h" |
| |
| /* ============================================================= */ |
| |
| #define WATCHDOG 5000000 |
| |
| #define SYNC_MODE 0 /* Synchronous transfer mode */ |
| |
| #if DEBUG |
| #undef NCR53C406A_DEBUG |
| #define NCR53C406A_DEBUG 1 |
| #endif |
| |
| #if USE_PIO |
| #define USE_DMA 0 |
| #else |
| #define USE_DMA 1 |
| #endif |
| |
| /* Default configuration */ |
| #define C1_IMG 0x07 /* ID=7 */ |
| #define C2_IMG 0x48 /* FE SCSI2 */ |
| #if USE_DMA |
| #define C3_IMG 0x21 /* CDB TE */ |
| #else |
| #define C3_IMG 0x20 /* CDB */ |
| #endif |
| #define C4_IMG 0x04 /* ANE */ |
| #define C5_IMG 0xb6 /* AA PI SIE POL */ |
| |
| #define REG0 (outb(C4_IMG, CONFIG4)) |
| #define REG1 (outb(C5_IMG, CONFIG5)) |
| |
| #if NCR53C406A_DEBUG |
| #define DEB(x) x |
| #else |
| #define DEB(x) |
| #endif |
| |
| #if VERBOSE_NCR53C406A_DEBUG |
| #define VDEB(x) x |
| #else |
| #define VDEB(x) |
| #endif |
| |
| #define LOAD_DMA_COUNT(count) \ |
| outb(count & 0xff, TC_LSB); \ |
| outb((count >> 8) & 0xff, TC_MSB); \ |
| outb((count >> 16) & 0xff, TC_HIGH); |
| |
| /* Chip commands */ |
| #define DMA_OP 0x80 |
| |
| #define SCSI_NOP 0x00 |
| #define FLUSH_FIFO 0x01 |
| #define CHIP_RESET 0x02 |
| #define SCSI_RESET 0x03 |
| #define RESELECT 0x40 |
| #define SELECT_NO_ATN 0x41 |
| #define SELECT_ATN 0x42 |
| #define SELECT_ATN_STOP 0x43 |
| #define ENABLE_SEL 0x44 |
| #define DISABLE_SEL 0x45 |
| #define SELECT_ATN3 0x46 |
| #define RESELECT3 0x47 |
| #define TRANSFER_INFO 0x10 |
| #define INIT_CMD_COMPLETE 0x11 |
| #define MSG_ACCEPT 0x12 |
| #define TRANSFER_PAD 0x18 |
| #define SET_ATN 0x1a |
| #define RESET_ATN 0x1b |
| #define SEND_MSG 0x20 |
| #define SEND_STATUS 0x21 |
| #define SEND_DATA 0x22 |
| #define DISCONN_SEQ 0x23 |
| #define TERMINATE_SEQ 0x24 |
| #define TARG_CMD_COMPLETE 0x25 |
| #define DISCONN 0x27 |
| #define RECV_MSG 0x28 |
| #define RECV_CMD 0x29 |
| #define RECV_DATA 0x2a |
| #define RECV_CMD_SEQ 0x2b |
| #define TARGET_ABORT_DMA 0x04 |
| |
| /*----------------------------------------------------------------*/ |
| /* the following will set the monitor border color (useful to find |
| where something crashed or gets stuck at */ |
| /* 1 = blue |
| 2 = green |
| 3 = cyan |
| 4 = red |
| 5 = magenta |
| 6 = yellow |
| 7 = white |
| */ |
| |
| #if NCR53C406A_DEBUG |
| #define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);} |
| #else |
| #define rtrc(i) {} |
| #endif |
| /*----------------------------------------------------------------*/ |
| |
| enum Phase { |
| idle, |
| data_out, |
| data_in, |
| command_ph, |
| status_ph, |
| message_out, |
| message_in |
| }; |
| |
| /* Static function prototypes */ |
| static void NCR53c406a_intr(int, void *, struct pt_regs *); |
| static void do_NCR53c406a_intr(int, void *, struct pt_regs *); |
| static void internal_done(Scsi_Cmnd *); |
| static void wait_intr(void); |
| static void chip_init(void); |
| static void calc_port_addr(void); |
| #ifndef IRQ_LEV |
| static int irq_probe(void); |
| #endif |
| |
| /* ================================================================= */ |
| |
| #if USE_BIOS |
| static void *bios_base; |
| #endif |
| |
| #if PORT_BASE |
| static int port_base = PORT_BASE; |
| #else |
| static int port_base; |
| #endif |
| |
| #if IRQ_LEV |
| static int irq_level = IRQ_LEV; |
| #else |
| static int irq_level = -1; /* 0 is 'no irq', so use -1 for 'uninitialized'*/ |
| #endif |
| |
| #if USE_DMA |
| static int dma_chan; |
| #endif |
| |
| #if USE_PIO |
| static int fast_pio = USE_FAST_PIO; |
| #endif |
| |
| static Scsi_Cmnd *current_SC; |
| static volatile int internal_done_flag; |
| static volatile int internal_done_errcode; |
| static char info_msg[256]; |
| |
| /* ================================================================= */ |
| |
| /* possible BIOS locations */ |
| #if USE_BIOS |
| static void *addresses[] = { |
| (void *)0xd8000, |
| (void *)0xc8000 |
| }; |
| #define ADDRESS_COUNT (sizeof( addresses ) / sizeof( unsigned )) |
| #endif /* USE_BIOS */ |
| |
| /* possible i/o port addresses */ |
| static unsigned short ports[] = |
| { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 }; |
| #define PORT_COUNT (sizeof( ports ) / sizeof( unsigned short )) |
| |
| /* possible interrupt channels */ |
| static unsigned short intrs[] = { 10, 11, 12, 15 }; |
| #define INTR_COUNT (sizeof( intrs ) / sizeof( unsigned short )) |
| |
| /* signatures for NCR 53c406a based controllers */ |
| #if USE_BIOS |
| struct signature { |
| char *signature; |
| int sig_offset; |
| int sig_length; |
| } signatures[] __initdata = { |
| /* 1 2 3 4 5 6 */ |
| /* 123456789012345678901234567890123456789012345678901234567890 */ |
| { "Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82 }, |
| }; |
| #define SIGNATURE_COUNT (sizeof( signatures ) / sizeof( struct signature )) |
| #endif /* USE_BIOS */ |
| |
| /* ============================================================ */ |
| |
| /* Control Register Set 0 */ |
| static int TC_LSB; /* transfer counter lsb */ |
| static int TC_MSB; /* transfer counter msb */ |
| static int SCSI_FIFO; /* scsi fifo register */ |
| static int CMD_REG; /* command register */ |
| static int STAT_REG; /* status register */ |
| static int DEST_ID; /* selection/reselection bus id */ |
| static int INT_REG; /* interrupt status register */ |
| static int SRTIMOUT; /* select/reselect timeout reg */ |
| static int SEQ_REG; /* sequence step register */ |
| static int SYNCPRD; /* synchronous transfer period */ |
| static int FIFO_FLAGS; /* indicates # of bytes in fifo */ |
| static int SYNCOFF; /* synchronous offset register */ |
| static int CONFIG1; /* configuration register */ |
| static int CLKCONV; /* clock conversion reg */ |
| /*static int TESTREG;*/ /* test mode register */ |
| static int CONFIG2; /* Configuration 2 Register */ |
| static int CONFIG3; /* Configuration 3 Register */ |
| static int CONFIG4; /* Configuration 4 Register */ |
| static int TC_HIGH; /* Transfer Counter High */ |
| /*static int FIFO_BOTTOM;*/ /* Reserve FIFO byte register */ |
| |
| /* Control Register Set 1 */ |
| /*static int JUMPER_SENSE;*/ /* Jumper sense port reg (r/w) */ |
| /*static int SRAM_PTR;*/ /* SRAM address pointer reg (r/w) */ |
| /*static int SRAM_DATA;*/ /* SRAM data register (r/w) */ |
| static int PIO_FIFO; /* PIO FIFO registers (r/w) */ |
| /*static int PIO_FIFO1;*/ /* */ |
| /*static int PIO_FIFO2;*/ /* */ |
| /*static int PIO_FIFO3;*/ /* */ |
| static int PIO_STATUS; /* PIO status (r/w) */ |
| /*static int ATA_CMD;*/ /* ATA command/status reg (r/w) */ |
| /*static int ATA_ERR;*/ /* ATA features/error register (r/w)*/ |
| static int PIO_FLAG; /* PIO flag interrupt enable (r/w) */ |
| static int CONFIG5; /* Configuration 5 register (r/w) */ |
| /*static int SIGNATURE;*/ /* Signature Register (r) */ |
| /*static int CONFIG6;*/ /* Configuration 6 register (r) */ |
| |
| /* ============================================================== */ |
| |
| #if USE_DMA |
| static __inline__ int |
| NCR53c406a_dma_setup (unsigned char *ptr, |
| unsigned int count, |
| unsigned char mode) { |
| unsigned limit; |
| unsigned long flags = 0; |
| |
| VDEB(printk("dma: before count=%d ", count)); |
| if (dma_chan <=3) { |
| if (count > 65536) |
| count = 65536; |
| limit = 65536 - (((unsigned) ptr) & 0xFFFF); |
| } else { |
| if (count > (65536<<1)) |
| count = (65536<<1); |
| limit = (65536<<1) - (((unsigned) ptr) & 0x1FFFF); |
| } |
| |
| if (count > limit) count = limit; |
| |
| VDEB(printk("after count=%d\n", count)); |
| if ((count & 1) || (((unsigned) ptr) & 1)) |
| panic ("NCR53c406a: attempted unaligned DMA transfer\n"); |
| |
| flags=claim_dma_lock(); |
| disable_dma(dma_chan); |
| clear_dma_ff(dma_chan); |
| set_dma_addr(dma_chan, (long) ptr); |
| set_dma_count(dma_chan, count); |
| set_dma_mode(dma_chan, mode); |
| enable_dma(dma_chan); |
| release_dma_lock(flags); |
| |
| return count; |
| } |
| |
| static __inline__ int |
| NCR53c406a_dma_write(unsigned char *src, unsigned int count) { |
| return NCR53c406a_dma_setup (src, count, DMA_MODE_WRITE); |
| } |
| |
| static __inline__ int |
| NCR53c406a_dma_read(unsigned char *src, unsigned int count) { |
| return NCR53c406a_dma_setup (src, count, DMA_MODE_READ); |
| } |
| |
| static __inline__ int |
| NCR53c406a_dma_residual (void) { |
| register int tmp; |
| unsigned long flags; |
| |
| flags=claim_dma_lock(); |
| clear_dma_ff(dma_chan); |
| tmp = get_dma_residue(dma_chan); |
| release_dma_lock(flags); |
| |
| return tmp; |
| } |
| #endif /* USE_DMA */ |
| |
| #if USE_PIO |
| static __inline__ int NCR53c406a_pio_read(unsigned char *request, |
| unsigned int reqlen) |
| { |
| int i; |
| int len; /* current scsi fifo size */ |
| unsigned long flags = 0; |
| |
| REG1; |
| while (reqlen) { |
| i = inb(PIO_STATUS); |
| /* VDEB(printk("pio_status=%x\n", i)); */ |
| if (i & 0x80) |
| return 0; |
| |
| switch( i & 0x1e ) { |
| default: |
| case 0x10: |
| len=0; break; |
| case 0x0: |
| len=1; break; |
| case 0x8: |
| len=42; break; |
| case 0xc: |
| len=84; break; |
| case 0xe: |
| len=128; break; |
| } |
| |
| if ((i & 0x40) && len == 0) { /* fifo empty and interrupt occurred */ |
| return 0; |
| } |
| |
| if (len) { |
| if( len > reqlen ) |
| len = reqlen; |
| |
| save_flags(flags); |
| cli(); |
| if( fast_pio && len > 3 ) { |
| insl(PIO_FIFO,request,len>>2); |
| request += len & 0xfc; |
| reqlen -= len & 0xfc; |
| } |
| else { |
| while(len--) { |
| *request++ = inb(PIO_FIFO); |
| reqlen--; |
| } |
| } |
| restore_flags(flags); |
| } |
| } |
| return 0; |
| } |
| |
| static __inline__ int NCR53c406a_pio_write(unsigned char *request, |
| unsigned int reqlen) |
| { |
| int i = 0; |
| int len; /* current scsi fifo size */ |
| unsigned long flags = 0; |
| |
| REG1; |
| while (reqlen && !(i&0x40)) { |
| i = inb(PIO_STATUS); |
| /* VDEB(printk("pio_status=%x\n", i)); */ |
| if (i & 0x80) /* error */ |
| return 0; |
| |
| switch( i & 0x1e ) { |
| case 0x10: |
| len=128; break; |
| case 0x0: |
| len=84; break; |
| case 0x8: |
| len=42; break; |
| case 0xc: |
| len=1; break; |
| default: |
| case 0xe: |
| len=0; break; |
| } |
| |
| if (len) { |
| if( len > reqlen ) |
| len = reqlen; |
| |
| save_flags(flags); |
| cli(); |
| if( fast_pio && len > 3 ) { |
| outsl(PIO_FIFO,request,len>>2); |
| request += len & 0xfc; |
| reqlen -= len & 0xfc; |
| } |
| else { |
| while(len--) { |
| outb(*request++, PIO_FIFO); |
| reqlen--; |
| } |
| } |
| restore_flags(flags); |
| } |
| } |
| return 0; |
| } |
| #endif /* USE_PIO */ |
| |
| int __init |
| NCR53c406a_detect(Scsi_Host_Template * tpnt){ |
| struct Scsi_Host *shpnt; |
| #ifndef PORT_BASE |
| int i; |
| #endif |
| |
| #if USE_BIOS |
| int ii, jj; |
| bios_base = 0; |
| /* look for a valid signature */ |
| for( ii=0; ii < ADDRESS_COUNT && !bios_base; ii++) |
| for( jj=0; (jj < SIGNATURE_COUNT) && !bios_base; jj++) |
| if(!memcmp((void *) addresses[ii]+signatures[jj].sig_offset, |
| (void *) signatures[jj].signature, |
| (int) signatures[jj].sig_length)) |
| bios_base=addresses[ii]; |
| |
| if(!bios_base){ |
| printk("NCR53c406a: BIOS signature not found\n"); |
| return 0; |
| } |
| |
| DEB(printk("NCR53c406a BIOS found at %X\n", (unsigned int) bios_base);); |
| #endif /* USE_BIOS */ |
| |
| #ifdef PORT_BASE |
| if (!request_region(port_base, 0x10, "NCR53c406a")) /* ports already snatched */ |
| port_base = 0; |
| |
| #else /* autodetect */ |
| if (port_base) { /* LILO override */ |
| if (!request_region(port_base, 0x10, "NCR53c406a")) |
| port_base = 0; |
| } |
| else { |
| for(i=0; i<PORT_COUNT && !port_base; i++){ |
| if(!request_region(ports[i], 0x10, "NCR53c406a")){ |
| DEB(printk("NCR53c406a: port %x in use\n", ports[i])); |
| } |
| else { |
| VDEB(printk("NCR53c406a: port %x available\n", ports[i])); |
| outb(C5_IMG, ports[i] + 0x0d); /* reg set 1 */ |
| if( (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 |
| && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 |
| && (inb(ports[i] + 0x0e) & 0xf8) == 0x58 ) { |
| port_base = ports[i]; |
| VDEB(printk("NCR53c406a: Sig register valid\n")); |
| VDEB(printk("port_base=%x\n", port_base)); |
| break; |
| } |
| release_region(ports[i], 0x10); |
| } |
| } |
| } |
| #endif /* PORT_BASE */ |
| |
| if(!port_base){ /* no ports found */ |
| printk("NCR53c406a: no available ports found\n"); |
| return 0; |
| } |
| |
| DEB(printk("NCR53c406a detected\n")); |
| |
| calc_port_addr(); |
| chip_init(); |
| |
| #ifndef IRQ_LEV |
| if (irq_level < 0) { /* LILO override if >= 0*/ |
| irq_level=irq_probe(); |
| if (irq_level < 0) { /* Trouble */ |
| printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level); |
| goto err_release; |
| } |
| } |
| #endif |
| |
| DEB(printk("NCR53c406a: using port_base %x\n", port_base)); |
| |
| if(irq_level > 0) { |
| if(request_irq(irq_level, do_NCR53c406a_intr, 0, "NCR53c406a", NULL)){ |
| printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level); |
| goto err_release; |
| } |
| tpnt->can_queue = 1; |
| DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level)); |
| } |
| else if (irq_level == 0) { |
| tpnt->can_queue = 0; |
| DEB(printk("NCR53c406a: No interrupts detected\n")); |
| #if USE_DMA |
| printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n"); |
| goto err_release; |
| #endif /* USE_DMA */ |
| } |
| else { |
| DEB(printk("NCR53c406a: Shouldn't get here!\n")); |
| goto err_free_irq; |
| } |
| |
| #if USE_DMA |
| dma_chan = DMA_CHAN; |
| if(request_dma(dma_chan, "NCR53c406a") != 0){ |
| printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan); |
| goto err_release; |
| } |
| |
| DEB(printk("Allocated DMA channel %d\n", dma_chan)); |
| #endif /* USE_DMA */ |
| |
| tpnt->present = 1; |
| tpnt->proc_name = "NCR53c406a"; |
| |
| shpnt = scsi_register(tpnt, 0); |
| if (!shpnt) { |
| printk("NCR53c406a: Unable to register host, giving up.\n"); |
| goto err_free_dma; |
| } |
| shpnt->irq = irq_level; |
| shpnt->io_port = port_base; |
| shpnt->n_io_port = 0x10; |
| #if USE_DMA |
| shpnt->dma = dma_chan; |
| #endif |
| |
| #if USE_DMA |
| sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", |
| port_base, irq_level, dma_chan); |
| #else |
| sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", |
| port_base, irq_level, fast_pio ? "fast" : "slow"); |
| #endif |
| |
| return (tpnt->present); |
| |
| |
| err_free_dma: |
| #if USE_DMA |
| free_dma(dma_chan); |
| #endif |
| err_free_irq: |
| free_irq(irq_level, do_NCR53c406a_intr); |
| err_release: |
| release_region(port_base, 0x10); |
| return 0; |
| } |
| |
| /* called from init/main.c */ |
| void __init NCR53c406a_setup(char *str, int *ints) |
| { |
| static size_t setup_idx = 0; |
| size_t i; |
| |
| DEB(printk("NCR53c406a: Setup called\n");); |
| |
| if (setup_idx >= PORT_COUNT - 1) { |
| printk("NCR53c406a: Setup called too many times. Bad LILO params?\n"); |
| return; |
| } |
| if (ints[0] < 1 || ints[0] > 3) { |
| printk("NCR53c406a: Malformed command line\n"); |
| printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n"); |
| return; |
| } |
| for (i = 0; i < PORT_COUNT && !port_base; i++) |
| if (ports[i] == ints[1]) { |
| port_base = ints[1]; |
| DEB(printk("NCR53c406a: Specified port_base 0x%X\n", port_base);) |
| } |
| if (!port_base) { |
| printk("NCR53c406a: Invalid PORTBASE 0x%X specified\n", ints[1]); |
| return; |
| } |
| |
| if (ints[0] > 1) { |
| if (ints[2] == 0) { |
| irq_level = 0; |
| DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);) |
| } |
| else |
| for (i = 0; i < INTR_COUNT && irq_level < 0; i++) |
| if (intrs[i] == ints[2]) { |
| irq_level = ints[2]; |
| DEB(printk("NCR53c406a: Specified irq %d\n", port_base);) |
| } |
| if (irq_level < 0) |
| printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]); |
| } |
| |
| if (ints[0] > 2) |
| fast_pio = ints[3]; |
| |
| DEB(printk("NCR53c406a: port_base=0x%X, irq=%d, fast_pio=%d\n", |
| port_base, irq_level, fast_pio);) |
| } |
| |
| const char* |
| NCR53c406a_info(struct Scsi_Host *SChost){ |
| DEB(printk("NCR53c406a_info called\n")); |
| return (info_msg); |
| } |
| |
| static void internal_done(Scsi_Cmnd *SCpnt) { |
| internal_done_errcode = SCpnt->result; |
| ++internal_done_flag; |
| } |
| |
| |
| static void wait_intr(void) { |
| int i = jiffies + WATCHDOG; |
| |
| while(time_after(i,jiffies) && !(inb(STAT_REG)&0xe0)) /* wait for a pseudo-interrupt */ |
| barrier(); |
| |
| if (time_before_eq(i,jiffies)) { /* Timed out */ |
| rtrc(0); |
| current_SC->result = DID_TIME_OUT << 16; |
| current_SC->SCp.phase = idle; |
| current_SC->scsi_done(current_SC); |
| return; |
| } |
| |
| NCR53c406a_intr(0, NULL, NULL); |
| } |
| |
| int NCR53c406a_command(Scsi_Cmnd *SCpnt){ |
| DEB(printk("NCR53c406a_command called\n")); |
| NCR53c406a_queue(SCpnt, internal_done); |
| if(irq_level) |
| while (!internal_done_flag); |
| else /* interrupts not supported */ |
| while (!internal_done_flag) |
| wait_intr(); |
| |
| internal_done_flag = 0; |
| return internal_done_errcode; |
| } |
| |
| |
| int |
| NCR53c406a_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)){ |
| int i; |
| unsigned long flags = 0; |
| |
| VDEB(printk("NCR53c406a_queue called\n")); |
| DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", |
| SCpnt->cmnd[0], |
| SCpnt->cmd_len, |
| SCpnt->target, |
| SCpnt->lun, |
| SCpnt->request_bufflen)); |
| |
| #if 0 |
| VDEB(for(i=0; i<SCpnt->cmd_len; i++) |
| printk("cmd[%d]=%02x ", i, SCpnt->cmnd[i])); |
| VDEB(printk("\n")); |
| #endif |
| |
| current_SC = SCpnt; |
| current_SC->scsi_done = done; |
| current_SC->SCp.phase = command_ph; |
| current_SC->SCp.Status = 0; |
| current_SC->SCp.Message = 0; |
| |
| save_flags(flags); |
| cli(); |
| REG0; |
| outb(SCpnt->target, DEST_ID); /* set destination */ |
| outb(FLUSH_FIFO, CMD_REG); /* reset the fifos */ |
| |
| for(i=0; i<SCpnt->cmd_len; i++){ |
| outb(SCpnt->cmnd[i], SCSI_FIFO); |
| } |
| outb(SELECT_NO_ATN, CMD_REG); |
| restore_flags(flags); |
| |
| rtrc(1); |
| return 0; |
| } |
| |
| int |
| NCR53c406a_abort(Scsi_Cmnd *SCpnt){ |
| DEB(printk("NCR53c406a_abort called\n")); |
| return SCSI_ABORT_SNOOZE; /* Don't know how to abort */ |
| } |
| |
| int |
| NCR53c406a_reset(Scsi_Cmnd *SCpnt, unsigned int ignored){ |
| DEB(printk("NCR53c406a_reset called\n")); |
| outb(C4_IMG, CONFIG4); /* Select reg set 0 */ |
| outb(CHIP_RESET, CMD_REG); |
| outb(SCSI_NOP, CMD_REG); /* required after reset */ |
| outb(SCSI_RESET, CMD_REG); |
| chip_init(); |
| |
| rtrc(2); |
| if (irq_level) |
| return SCSI_RESET_PENDING; /* should get an interrupt */ |
| else |
| return SCSI_RESET_WAKEUP; /* won't get any interrupts */ |
| } |
| |
| int |
| NCR53c406a_biosparm(Scsi_Disk *disk, kdev_t dev, int* info_array){ |
| int size; |
| |
| DEB(printk("NCR53c406a_biosparm called\n")); |
| |
| size = disk->capacity; |
| info_array[0] = 64; /* heads */ |
| info_array[1] = 32; /* sectors */ |
| info_array[2] = size>>11; /* cylinders */ |
| if (info_array[2] > 1024) { /* big disk */ |
| info_array[0] = 255; |
| info_array[1] = 63; |
| info_array[2] = size / (255*63); |
| } |
| return 0; |
| } |
| |
| static void |
| do_NCR53c406a_intr(int unused, void *dev_id, struct pt_regs *regs){ |
| unsigned long flags; |
| |
| spin_lock_irqsave(&io_request_lock, flags); |
| NCR53c406a_intr(0, dev_id, regs); |
| spin_unlock_irqrestore(&io_request_lock, flags); |
| } |
| |
| static void |
| NCR53c406a_intr(int unused, void *dev_id, struct pt_regs *regs){ |
| DEB(unsigned char fifo_size;) |
| DEB(unsigned char seq_reg;) |
| unsigned char status, int_reg; |
| unsigned long flags = 0; |
| #if USE_PIO |
| unsigned char pio_status; |
| struct scatterlist *sglist; |
| unsigned int sgcount; |
| #endif |
| |
| VDEB(printk("NCR53c406a_intr called\n")); |
| |
| save_flags(flags); |
| cli(); |
| #if USE_PIO |
| REG1; |
| pio_status = inb(PIO_STATUS); |
| #endif |
| REG0; |
| status = inb(STAT_REG); |
| DEB(seq_reg = inb(SEQ_REG)); |
| int_reg = inb(INT_REG); |
| DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f); |
| restore_flags(flags); |
| |
| #if NCR53C406A_DEBUG |
| printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", |
| status, seq_reg, int_reg, fifo_size); |
| #if (USE_DMA) |
| printk("\n"); |
| #else |
| printk(", pio=%02x\n", pio_status); |
| #endif /* USE_DMA */ |
| #endif /* NCR53C406A_DEBUG */ |
| |
| if(int_reg & 0x80){ /* SCSI reset intr */ |
| rtrc(3); |
| DEB(printk("NCR53c406a: reset intr received\n")); |
| current_SC->SCp.phase = idle; |
| current_SC->result = DID_RESET << 16; |
| current_SC->scsi_done(current_SC); |
| return; |
| } |
| |
| #if USE_PIO |
| if(pio_status & 0x80) { |
| printk("NCR53C406A: Warning: PIO error!\n"); |
| current_SC->SCp.phase = idle; |
| current_SC->result = DID_ERROR << 16; |
| current_SC->scsi_done(current_SC); |
| return; |
| } |
| #endif /* USE_PIO */ |
| |
| if(status & 0x20) { /* Parity error */ |
| printk("NCR53c406a: Warning: parity error!\n"); |
| current_SC->SCp.phase = idle; |
| current_SC->result = DID_PARITY << 16; |
| current_SC->scsi_done(current_SC); |
| return; |
| } |
| |
| if(status & 0x40) { /* Gross error */ |
| printk("NCR53c406a: Warning: gross error!\n"); |
| current_SC->SCp.phase = idle; |
| current_SC->result = DID_ERROR << 16; |
| current_SC->scsi_done(current_SC); |
| return; |
| } |
| |
| if(int_reg & 0x20){ /* Disconnect */ |
| DEB(printk("NCR53c406a: disconnect intr received\n")); |
| if(current_SC->SCp.phase != message_in){ /* Unexpected disconnect */ |
| current_SC->result = DID_NO_CONNECT << 16; |
| } |
| else{ /* Command complete, return status and message */ |
| current_SC->result = (current_SC->SCp.Status & 0xff) |
| | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16); |
| } |
| |
| rtrc(0); |
| current_SC->SCp.phase = idle; |
| current_SC->scsi_done( current_SC ); |
| return; |
| } |
| |
| switch(status & 0x07){ /* scsi phase */ |
| case 0x00: /* DATA-OUT */ |
| if(int_reg & 0x10){ /* Target requesting info transfer */ |
| rtrc(5); |
| current_SC->SCp.phase = data_out; |
| VDEB(printk("NCR53c406a: Data-Out phase\n")); |
| outb(FLUSH_FIFO, CMD_REG); |
| LOAD_DMA_COUNT(current_SC->request_bufflen); /* Max transfer size */ |
| #if USE_DMA /* No s/g support for DMA */ |
| NCR53c406a_dma_write(current_SC->request_buffer, |
| current_SC->request_bufflen); |
| #endif /* USE_DMA */ |
| outb(TRANSFER_INFO | DMA_OP, CMD_REG); |
| #if USE_PIO |
| if (!current_SC->use_sg) /* Don't use scatter-gather */ |
| NCR53c406a_pio_write(current_SC->request_buffer, |
| current_SC->request_bufflen); |
| else { /* use scatter-gather */ |
| sgcount = current_SC->use_sg; |
| sglist = current_SC->request_buffer; |
| while( sgcount-- ) { |
| NCR53c406a_pio_write(sglist->address, sglist->length); |
| sglist++; |
| } |
| } |
| REG0; |
| #endif /* USE_PIO */ |
| } |
| break; |
| |
| case 0x01: /* DATA-IN */ |
| if(int_reg & 0x10){ /* Target requesting info transfer */ |
| rtrc(6); |
| current_SC->SCp.phase = data_in; |
| VDEB(printk("NCR53c406a: Data-In phase\n")); |
| outb(FLUSH_FIFO, CMD_REG); |
| LOAD_DMA_COUNT(current_SC->request_bufflen); /* Max transfer size */ |
| #if USE_DMA /* No s/g support for DMA */ |
| NCR53c406a_dma_read(current_SC->request_buffer, |
| current_SC->request_bufflen); |
| #endif /* USE_DMA */ |
| outb(TRANSFER_INFO | DMA_OP, CMD_REG); |
| #if USE_PIO |
| if (!current_SC->use_sg) /* Don't use scatter-gather */ |
| NCR53c406a_pio_read(current_SC->request_buffer, |
| current_SC->request_bufflen); |
| else { /* Use scatter-gather */ |
| sgcount = current_SC->use_sg; |
| sglist = current_SC->request_buffer; |
| while( sgcount-- ) { |
| NCR53c406a_pio_read(sglist->address, sglist->length); |
| sglist++; |
| } |
| } |
| REG0; |
| #endif /* USE_PIO */ |
| } |
| break; |
| |
| case 0x02: /* COMMAND */ |
| current_SC->SCp.phase = command_ph; |
| printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n"); |
| break; |
| |
| case 0x03: /* STATUS */ |
| rtrc(7); |
| current_SC->SCp.phase = status_ph; |
| VDEB(printk("NCR53c406a: Status phase\n")); |
| outb(FLUSH_FIFO, CMD_REG); |
| outb(INIT_CMD_COMPLETE, CMD_REG); |
| break; |
| |
| case 0x04: /* Reserved */ |
| case 0x05: /* Reserved */ |
| printk("NCR53c406a: WARNING: Reserved phase!!!\n"); |
| break; |
| |
| case 0x06: /* MESSAGE-OUT */ |
| DEB(printk("NCR53c406a: Message-Out phase\n")); |
| current_SC->SCp.phase = message_out; |
| outb(SET_ATN, CMD_REG); /* Reject the message */ |
| outb(MSG_ACCEPT, CMD_REG); |
| break; |
| |
| case 0x07: /* MESSAGE-IN */ |
| rtrc(4); |
| VDEB(printk("NCR53c406a: Message-In phase\n")); |
| current_SC->SCp.phase = message_in; |
| |
| current_SC->SCp.Status = inb(SCSI_FIFO); |
| current_SC->SCp.Message = inb(SCSI_FIFO); |
| |
| VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f)); |
| DEB(printk("Status = %02x Message = %02x\n", |
| current_SC->SCp.Status, current_SC->SCp.Message)); |
| |
| if(current_SC->SCp.Message == SAVE_POINTERS || |
| current_SC->SCp.Message == DISCONNECT) { |
| outb(SET_ATN, CMD_REG); /* Reject message */ |
| DEB(printk("Discarding SAVE_POINTERS message\n")); |
| } |
| outb(MSG_ACCEPT, CMD_REG); |
| break; |
| } |
| } |
| |
| #ifndef IRQ_LEV |
| static int irq_probe(void) |
| { |
| int irqs, irq; |
| int i; |
| |
| inb(INT_REG); /* clear the interrupt register */ |
| irqs = probe_irq_on(); |
| |
| /* Invalid command will cause an interrupt */ |
| REG0; |
| outb(0xff, CMD_REG); |
| |
| /* Wait for the interrupt to occur */ |
| i = jiffies + WATCHDOG; |
| while(time_after(i, jiffies) && !(inb(STAT_REG) & 0x80)) |
| barrier(); |
| if (time_before_eq(i, jiffies)) { /* Timed out, must be hardware trouble */ |
| probe_irq_off(irqs); |
| return -1; |
| } |
| |
| irq = probe_irq_off(irqs); |
| |
| /* Kick the chip */ |
| outb(CHIP_RESET, CMD_REG); |
| outb(SCSI_NOP, CMD_REG); |
| chip_init(); |
| |
| return irq; |
| } |
| #endif /* IRQ_LEV */ |
| |
| static void chip_init(void) |
| { |
| REG1; |
| #if USE_DMA |
| outb(0x00, PIO_STATUS); |
| #else /* USE_PIO */ |
| outb(0x01, PIO_STATUS); |
| #endif |
| outb(0x00, PIO_FLAG); |
| |
| outb(C4_IMG, CONFIG4); /* REG0; */ |
| outb(C3_IMG, CONFIG3); |
| outb(C2_IMG, CONFIG2); |
| outb(C1_IMG, CONFIG1); |
| |
| outb(0x05, CLKCONV); /* clock conversion factor */ |
| outb(0x9C, SRTIMOUT); /* Selection timeout */ |
| outb(0x05, SYNCPRD); /* Synchronous transfer period */ |
| outb(SYNC_MODE, SYNCOFF); /* synchronous mode */ |
| } |
| |
| void __init calc_port_addr(void) |
| { |
| /* Control Register Set 0 */ |
| TC_LSB = (port_base+0x00); |
| TC_MSB = (port_base+0x01); |
| SCSI_FIFO = (port_base+0x02); |
| CMD_REG = (port_base+0x03); |
| STAT_REG = (port_base+0x04); |
| DEST_ID = (port_base+0x04); |
| INT_REG = (port_base+0x05); |
| SRTIMOUT = (port_base+0x05); |
| SEQ_REG = (port_base+0x06); |
| SYNCPRD = (port_base+0x06); |
| FIFO_FLAGS = (port_base+0x07); |
| SYNCOFF = (port_base+0x07); |
| CONFIG1 = (port_base+0x08); |
| CLKCONV = (port_base+0x09); |
| /* TESTREG = (port_base+0x0A); */ |
| CONFIG2 = (port_base+0x0B); |
| CONFIG3 = (port_base+0x0C); |
| CONFIG4 = (port_base+0x0D); |
| TC_HIGH = (port_base+0x0E); |
| /* FIFO_BOTTOM = (port_base+0x0F); */ |
| |
| /* Control Register Set 1 */ |
| /* JUMPER_SENSE = (port_base+0x00);*/ |
| /* SRAM_PTR = (port_base+0x01);*/ |
| /* SRAM_DATA = (port_base+0x02);*/ |
| PIO_FIFO = (port_base+0x04); |
| /* PIO_FIFO1 = (port_base+0x05);*/ |
| /* PIO_FIFO2 = (port_base+0x06);*/ |
| /* PIO_FIFO3 = (port_base+0x07);*/ |
| PIO_STATUS = (port_base+0x08); |
| /* ATA_CMD = (port_base+0x09);*/ |
| /* ATA_ERR = (port_base+0x0A);*/ |
| PIO_FLAG = (port_base+0x0B); |
| CONFIG5 = (port_base+0x0D); |
| /* SIGNATURE = (port_base+0x0E);*/ |
| /* CONFIG6 = (port_base+0x0F);*/ |
| } |
| MODULE_LICENSE("GPL"); |
| |
| /* Eventually this will go into an include file, but this will be later */ |
| static Scsi_Host_Template driver_template = NCR53c406a; |
| |
| #include "scsi_module.c" |
| |
| /* |
| * Overrides for Emacs so that we get a uniform tabbing style. |
| * Emacs will notice this stuff at the end of the file and automatically |
| * adjust the settings for this buffer only. This must remain at the end |
| * of the file. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-indent-level: 4 |
| * c-brace-imaginary-offset: 0 |
| * c-brace-offset: -4 |
| * c-argdecl-indent: 4 |
| * c-label-offset: -4 |
| * c-continued-statement-offset: 4 |
| * c-continued-brace-offset: 0 |
| * indent-tabs-mode: nil |
| * tab-width: 8 |
| * End: |
| */ |